lead-free temperature-controlled soldering stations

Transcription

SOLDERING
SYSTEM
FD-110
FD-100
LEAD-FREE AUTOMATIC
SOLDER FEEDER
NC-100R
N2 STATION
RX-802ASPH
TEMPERATURE-CONTROLLED
LEAD-FREE NITROGEN
SOLDERING STATION
RX-802AS
TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER
LEAD-FREE
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
SOLDERING STATIONS
LEAD-FREE TEMPERATURE-CONTROLLED
SOLDERING STATIONS
TEMPERATURE-CONTROLLED,
LEAD-FREE, DUAL-PORT
SOLDERING STATION
RX-822AS
LEAD-FREE SOLDERING
STATIONS
RX-852AS
SOLDER POTS
SURFACE MOUNT / SMT
SURFACE-MOUNT
PRODUCTS
DESOLDERINGS
SOLDERING
ACCESSORIES
SOLDERING WORK HEATED TOOLS
MATERIALS
HAND TOOLS
11
SOLDERING
SYSTEM
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
SOLDERING STATIONS TEMPERATURE-CONTROLLED
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS
SOLDERING STATIONS
SOLDER POTS
2 soldering irons can be used.
LEAD
RoHS ANTI
STATIC FREE
TEMPERATURE-CONTROLLED, LEAD-FREE,
DUAL-PORT SOLDERING STATION
RX-822AS
New Soldering Iron Stand
More stable, better operation
Tips not included.
2 Soldering Irons can Be Used
Can be prepared with 2 soldering irons. Allows different types
of work [such as micro soldering / high power work (150W)] at
the same time. Two RX-85GAS (150W) irons cannot be used together.
Individual Temperature Setting
Enables Reworking of
Chip Parts
Allows you to rework chip
parts using 2 tips at a time.
SOLDERING
ACCESSORIES
SOLDERING WORK
MATERIALS
HEATED TOOLS
HAND TOOLS
12
Easy-to-Use Handpiece (PAT.)
Easy to replace a hot tip without any other tools. Good for long
hours of work with light, well-insulated structure.
Wide Variety of Tips
More than 40 tips are available.
Independent displays make
settings clear.
DESOLDERINGS
SURFACE MOUNT / SMT
PRODUCTS
LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
Advanced Functions
(PAT.)
Equipped with intelligent functions (sleep, sleep release, shutdown and Key lock) based on the RX-802AS.
HOW TO CHANGE TIPS
Slide the lever in the direction of the arrow. The tip will
come out. Hold and pull the plastic housing of the tip.
Slide lever
Tip
Hold here
INCLUDED
Station Unit
Soldering Iron1
RX-85GAS
Tip is not included
Soldering Iron2
RX-80GAS
Tip is not included
Soldering Iron Stands
ST-21
Brass Wool & Sponges included
Inlet Power Cord
SOLDERING
SYSTEM
PRODUCT SPECIFICATIONS / FUNCTIONS
KEY LOCK
CALIBRATION
(PAT.)
TIP1
(˚C)
250
Operation
Operation
With RX-85HRT-5D
150
50
10 12 14
250
150
150
50
0
(min.)
Operation
With RX-80HRT-5.4D
2
4
6
8
10 12 14
2
4
6
8
10 12 14
(min.)
A generous amount of lead-free solder on a land of 20mm dia. dissolving 35 points in succession at 350˚C.
HIGH/LOW TEMPERATURE ALARM
An alarm sounds when the temperature goes above or below
temperature settings.
High/low setting range 3-100°C.
L
Lower limit
H
Set temperature
Upper limit
INTELLIGENT SLEEP FUNCTION (PAT.)
Automatically lowers the temperature when the iron is not in
use, during a preset period of
time. Prevents tip oxidation and
excess heating. Can be used with
Shutdown function.
SLEEP FUNCTION RELEASE (PAT.)
0
2
4
6
8
10 12 14
(min.)
Model
RX-822AS
Voltage
Power Consumption
Power Cord Length
Temperature Setting Range
Insulation Resistance
Ripple temperature
Accessories
110–120V, 220–240V AC 50/60Hz
220–260W
1.5m inlet type
50–450°C
Over 100MΩ (500V DC)
±5˚C (unloaded)
Soldering Iron Stand (ST-21 ) × 2
Control Unit
Output Voltage
Dimensions
Weight
24V AC
116(W) × 105(H) × 194(D)mm
4.9kg
Soldering Unit
DIF
Set temperature
DIF
Operation
Sleep start
CT
SST
Time
Power ON
MODE: Sleep function ON/OFF
CT: Sleep start time
SST: Sleep set temperature
DIF: Sleep sensitivity
Each parameter can be set.
Voltage/Consumption
Ground Resistance
Leak Voltage
Heater
Cord Length
RX-85GAS
Length
RX-80GAS
RX-85GAS
Weight
RX-80GAS
Soldering Unit1 (RX-85GAS) : 24V AC / 72W·150W
Soldering Unit2 (RX-80GAS) : 24V AC / 72W
Less than 2Ω
Less than 2mV
Nichrome heater
Soldering Unit1 :1.5m, Soldering Unit2 : 1.2m
174mm (with RX-85HRT-5D)
158mm (with RX-80HRT-B)
39g (with RX-85HRT-5D)
28g (with RX-80HRT-B)
Equivalent to IPC/EIA J-STD-001C
Two RX-85GAS (150W) irons cannot be used together.
SHUTDOWN FUNCTION
DIF
DIF
SUT
Power ON
Set temperature
Power OFF
Time
DIF
DIF
CALIBRATION SERVICES
Set temperature
We provide calibration and/or
certification for a fee.
Sleep
setting temp.
Operation
Power OFF
CT
SUT
Power ON
Time
SOLDERING
ACCESSORIES
When the unit is not used during the preset time, the unit automatically shuts down. Great when you forget to turn the power off.
RX-852AS Soldering unit
Soldering Iron Stand Sponge
Soldering Iron Stand Cleaner
Flux Guard Rubber
RX-85GAS
RX-80GAS
ST-53SP
ST-40BW
RX-80P
Tip is not included
MATERIALS
REPLACEMENT PARTS / OPTIONS
Tip is not included
(2pcs/set)
Accessories HANDPIECE GRIP RUBBER (Anti-static)
For quick identification of soldering tasks or types.
RX-80RB-GR : green
RX-80RB-OR : orange
with RX-80P
HAND TOOLS
RX-80RB : gray
RX-80RB-BK : black
DESOLDERINGS
Operation
For replacement tips, refer to p.20 & p.21
When used together with Sleep function.
SURFACE MOUNT / SMT
PRODUCTS
*The length does not include the cord bushing. The weight does not include the cord.
Shutdown Function
SOLDER POTS
Sleep mode can be exited (at any
time) by touching a wet sponge
with the tip to cause temperature
fluctuation. (Effective when temperature is set above 100°C)
SPECIFICATIONS
50
0
(min.)
Soldering tip temperatrue
8
350
250
6
4
(˚C)
350
NEW ERGONOMIC
GRIP (PAT.)
Lock with password. No tools The c alibr ation f unc tion Prevents fatigue. Flexible
or card necessary.
digitally offsets the difference cord, and a shorter distance
between the tip temperature from the handpiece to the tip.
and the temperature shown by
Operation
a tip thermometer being used.
TIP2
(˚C)
350
(PAT.)
LEAD-FREE
SOLDERING STATIONS
TIP-TEMPERATURE RECOVERY FEATURES
with RX-80RB
13
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDER POTS
SURFACE MOUNT / SMT
PRODUCTS
DESOLDERINGS
Phenomenal heat recovery with 150W
compact high-output heater.
LEAD
RoHS ANTI
STATIC FREE
LEAD-FREE SOLDERING STATION
RX-852AS
Tip not included.
Excellent Heat Recovery (PAT.)
Excellent heat recovery has
been achieved by combining
a 150W compact high-output
heater with a high-sensitivity
sensor.
Up to 22mm² copper wire can
be soldered.
Thick Tip Coating for Lead-free Soldering
All tips have extra-thick iron plating, to resist erosion by
lead-free solder.
RX-80HRT Tips also Available
More than 40 tips are
available, including the
RX-80HRT tips.
Slim tips now added to line-up.
Fastest in Its Class
HAND TOOLS
HEATED TOOLS
SOLDERING WORK
MATERIALS
SOLDERING
ACCESSORIES
Reaches 350°C in only 14 seconds. (Only 6 seconds when
using RX-80HRT tips.)
14
Light and Compact Handpiece
Same size as the RX-80GAS.
Tip Replacement without Tools (PAT.)
Slide-change tip. Easy to replace a hot tip without any
other tools.
HOW TO CHANGE TIPS
Slide lever
Tip
INCLUDED
Station Unit
Soldering Iron
RX-85GAS
Tip is not included
ST-21
Inlet Power Cord
Hold here
SOLDERING
SYSTEM
SOLDERING ALARM FUNCTION (PAT.)
(1) Soldering time countdown (AT )
starts when the tip is applied to the
component. (The tip temperature
goes outside DIF)
(2)The alarm sounds after the preset
countdown. (The display flashes
twice)
(3)Operator takes the tip off the component.
400
400
300
300
Tip Temperature Stability
200
Tip Temperature Stability
200
RX-802AS
RX-852AS
Amount of time required :
Amount of time required :
10min.10s.
100
(˚C)
0
2
4
6
8
10
12
7min.20s.
100
(˚C)
0
14
(min.)
A generous amount of lead-free solder on
a land of 20mm dia. dissolving 35 points in
succession at 350˚C.
2
4
6
8
10
12
L
Set temperature
or card necessary.
DIF
Set temperature
DIF
Operation
Model
RX-852AS
Voltage
Power Consumption
Power Cord Length
Ripple temperature
Accessories
110–120V, 220–240V AC 50/60Hz
145–170W
1.5m inlet type
50–450°C
±5˚C (unloaded)
Soldering Iron Stand (ST-21)
Sleep start
CT
SST
Time
Power ON
Control Unit
Output Voltage
Dimensions
Weight
24V AC
116(W) × 105(H) × 194(D)mm
4.8kg
Soldering Unit
Voltage / Consumption
Ground Resistance
Leak Voltage
Heater
Cord Length
Length
Weight
24V AC / 150W
Less than 2Ω
Less than 2mV
Nichrome heater
1.5m
174mm (with RX-85HRT-5D)
39g (with RX-85HRT-5D)
Power ON
Time
Power OFF
DIF
DIF
Set temperature
Sleep
setting temp.
Operation
Power OFF
CT
For replacement tips, refer to p.20 & p.21
SUT
Power ON
Time
Flux Guard Rubber
RX-85GAS
ST-53SP
ST-40BW
RX-80P
MATERIALS
(2pcs./set)
RX-80RB-GR : green
RX-80RB-OR : orange
with RX-80P
HAND TOOLS
RX-80RB : gray
RX-80RB-BK : black
SOLDERING
ACCESSORIES
Tip is not included
DESOLDERINGS
SUT
Set temperature
NEW ERGONOMIC
GRIP (PAT.)
SURFACE MOUNT / SMT
PRODUCTS
(PAT.)
(PAT.)
When using together with Sleep function.
DIF
DIF
Operation
CALIBRATION
KEY LOCK
Upper limit
SHUTDOWN FUNCTION
Shutdown Function
Time
SOLDER POTS
②③
Power ON
H
AT
①
SPECIFICATIONS
Lower limit
Shutdown function.
Set
temperature
14
(min.)
Shortens soldering time significantly, and
the tip temperature is more stable.
DIF
DIF
Tip temperatrue
Soldering efficiency increased by 39%!
LEAD-FREE
SOLDERING STATIONS
with RX-80RB
15
6 seconds to set temperature.
The ultimate solution for lead-free soldering.
LEAD
RoHS ANTI
STATIC FREE
TEMPERATURE-CONTROLLED LEAD-FREE SOLDERING STATION
RX-802AS
Tip not included.
SOLDERING
SYSTEM
SURFACE MOUNT / SMT
PRODUCTS
Excellent Heat Recovery (PAT.)
Thick Tip Coating for Lead-free Soldering
There is almost no temperature fluctuation during continuous
operation. Good for lead-free soldering.
All tips have extra-thick iron plating, to resist erosion by leadfree solder.
DESOLDERINGS
SOLDER POTS
SOLDERING STATIONS
Reaches set temperature in just 6 seconds after turning power
on.
Fastest in Its Class
HAND TOOLS
HEATED TOOLS
SOLDERING WORK
MATERIALS
SOLDERING
ACCESSORIES
Tip Replacement without Tools (PAT.)
16
HOW TO CHANGE TIPS
Slide lever
Slide-change tip. Easy to replace a hot tip without any other
tools.
Reduced Grip Heat (PAT.)
Tip
Patented thermal-insulation grip permits comfortable and safe
work.
INCLUDED
Station Unit
Soldering Iron
RX-80GAS
Tip is not included
ST-21
Hold here
SOLDERING
SYSTEM
(1) Soldering time countdown (AT )
starts when the tip is applied to the
component. (The tip temperature
goes outside DIF)
(2)The alarm sounds after the preset
countdown. (The display flashes
twice)
(3)Operator takes the tip off the component.
(˚C)
400
During work
350
300
Even during continuous heavy load work
the temperature of the soldering iron tip
remains close to the set temperature.
250
200
150
100
DIF
DIF
Tip temperatrue
The tip temperature
remains close to set
temperature even during
heavy load work.
SOLDERING ALARM FUNCTION (PAT.)
Set
temperature
AT
①
②③
Power ON
Time
50
0
50
100
150
200
250
300 (sec.)
(PAT.)
L
Lower limit
Set temperature
DIF
Operation
Sleep start
CT
SST
Power OFF
Power ON
Time
SUT
DIF
DIF
Output Voltage
Dimensions
Weight
24V AC
115(W) × 98(H) × 146(D)mm
1.8kg
Soldering Unit
Voltage/Consumption
Ground Resistance
Leak Voltage
Heater
Cord Length
Length
Weight
24V AC / 72W
Less than 2Ω
Less than 2mV
Nichrome heater
1.2m
158mm (with RX-80HRT-BM)
28g (with RX-80HRT-BM)
Set temperature
Sleep
setting temp.
Operation
Power OFF
CT
SUT
Power ON
For replacement tips, refer to p.20
Time
Soldering Iron
Flux Guard Rubber
RX-80GAS
ST-53SP
ST-40BW
RX-80P
Tip is not included
MATERIALS
SOLDERING
ACCESSORIES
(2pcs./set)
RX-80RB-GR : green
RX-80RB-OR : orange
with RX-80P
HAND TOOLS
RX-80RB : gray
RX-80RB-BK : black
DESOLDERINGS
Set temperature
RX-802AS
110V,120V,130V,220V,230V,240V AC 50/60Hz
80W
1.2m
50–450°C
±5˚C (unloaded)
Soldering Iron Stand (ST-21 )
SURFACE MOUNT / SMT
PRODUCTS
Operation
When using together with Sleep function.
DIF
DIF
Model
Voltage
Power Consumption
Power Cord Length
Ripple temperature
Accessories
Control Unit
Time
Power ON
SHUTDOWN FUNCTION
Shutdown Function
NEW ERGONOMIC
GRIP (PAT.)
SOLDER POTS
DIF
(PAT.)
SPECIFICATIONS
Upper limit
Shutdown function.
CALIBRATION
or card necessary.
H
Set temperature
KEY LOCK
LEAD-FREE
SOLDERING STATIONS
with RX-80RB
17
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDER POTS
SURFACE MOUNT / SMT
PRODUCTS
DESOLDERINGS
Nitrogen improves solder wetting
and fillet shape.
NOTE Preheat effect cannot be achieved by the
RX-802ASPH alone. A Nitrogen gas generator is
required. We recommend our NC-100R N2 station.
LEAD-FREE NITROGEN SOLDERING STATION
RX-802ASPH
Tip not included.
LEAD
RoHS ANTI
STATIC FREE
All-in-one N2 Nozzle Tips (PAT.)
IMPROVING LEAD-FREE
SOLDERING
Each RX-80HRT tip is euipped with a slim
N2 nozzle.
Advantages of the Preheat Effect
Slim N2 Nozzles
φ6.4mm slim N2 nozzles. Get into small spaces easily.
Light and Easy-to-use Handpiece
Handpiece weighs only 33g. So light it’s hard to believe it’s for a
Nitrogen station!
●Allows you to use lead-free solder
(which has a high melting point) at a
temperature close to that of a Eutectic
Sn-Pb tip.
●Minimal tip temperature reduction
shortens soldering time significantly.
Super-flexible. Allows free maneuvering of handpiece.
Advantages of Preheating with Nitrogen
Special Tool for Easy Tip Replacement
●Reduces oxidation of the solder area
and the tip.
Comes with a handy tool to change a hot tip easily.
●Improves solder wetting and fillet
shape.
HEATED TOOLS
HAND TOOLS
18
INCLUDED
Soldering Iron
RX-80GASPH
Tip is not included
ST-21
A tip alone heats only the
solder joint area, so the PCB
drains the heat. Solder wetting may also be poor.
Nitrogen soldering iron
●Reduces splashing or component
damage by heat shock.
SOLDERING WORK
MATERIALS
SOLDERING
ACCESSORIES
Flexible N2 Induction Tube
Station Unit
Normal soldering iron
Tip changing tool
RX-80PHC
Nitrogen preheats the whole
soldering area. This is particularly effective on a multi-layered PCB copper pattern.
Better solder wetting.
SOLDERING
SYSTEM
Model
RX-802ASPH
Voltage
Power Consumption
Power Cord Length
Ripple temperature
Accessories
110V,120V,130V,220V,230V,240V AC 50/60Hz
80W
1.2m (3 core cord) ground plug
50–450°C
±5˚C (unloaded)
100MΩ (500V DC)
Soldering Iron Stand (ST-21 )
For basic performance, please refer to RX-802AS, page 16.
The standard soldering unit RX-80GAS and the tips RX-80HRT series
cannot be used as a N2 soldering iron.
For replacement tips, refer to p.21
Output Voltage
Dimensions
Weight
24V AC
115(W) × 98(H) × 146(D)mm
1.8kg
Soldering Unit
Voltage / Consumption
Ground Resistance
Leak Voltage
Heater
Cord Length
Length
Gas Supply Pressure
Weight
24V AC / 72W
Less than 2Ω
Less than 2mV
Nichrome heater
1.2m
158mm (with RX-80HRT-PHB)
0.2MPa(2kgf/cm2)
33g (with RX-80HRT-PHB)
We provide calibration and/or certification for a fee.
Soldering Unit Hand Piece
N2 O-ring
Tip changing tool
RX-80GASPH
RX-80PHP
RX-80PHC
ST-53SP
ST-40BW
Tip is not included
(2pcs./set)
A compact N2 station combining
N2 generator and controller.
RoHS ANTI
STATIC
100
The special separation membrane separates the nitrogen
from the compressed air produced by a compressor.
95
90
85
80
0.3[MPa]
0.5[MPa]
0.7[MPa]
75
MPa
L/min
0.5
98.7
99.8
99.9
1.0
96.6
99.2
99.7
1.5
94.5
98.0
99.2
2.0
92.0
96.8
98.3
1
1.5 2.0 2.5 3.0 3.5 4.0
Flow rate [L / min]
2.5
90.8
95.7
97.7
3.0
89.7
94.8
97.1
3.5
88.5
93.8
96.3
4.0
87.5
92.6
95.4
An example of measured value
Model
Input pressure
Input temperature
Nitrogen generation
density
Recommended Nitrogen
generation flow rate
Flow meter
Dimensions
Required Hose Dimension
0.3−0.7MPa
5−50˚C
Maximum 99.5% (0.7MPa, 0.5L / min)
1.0L / min
0.5-4.0L / min
118(W) × 112(H) × 185(D)mm
(not including protruding parts)
2kg
Input: Outer diameter ø6mm
Output : Outer diameter ø4mm
RX-802ASPH + NC-100R
HAND TOOLS
Weight
NC-100R
■SET-UP EXAMPLE
MATERIALS
SPECIFICATIONS
SOLDERING
ACCESSORIES
0.3
0.5
0.7
0.5
DESOLDERINGS
Maintains a stable output
pressure(0.2Mpa). Two-tiered
setting with RX-802ASPH
achieves ef ficient work in
smaller space.
The relation between Nitrogen density,
flow rate, and input air pressure
SURFACE MOUNT / SMT
PRODUCTS
Nitrogen density [%]
NC-100R
(According to in-house
measuring method)
SOLDER POTS
N2 STATION
NITROGEN GENERATION DENSITY
LEAD-FREE
SOLDERING STATIONS
Control Unit
SPECIFICATIONS
19
RX-80HRT Series / Applicable Model (Grip)
RX-802AS (RX-80GAS), RX-852AS (RX-85GAS)
RX-822AS (RX-80GAS and RX-85GAS)
34.5
φ5.4
RoHS
2
φ3
7
7
φ
4.
φ1.6
RX-80HRT-4.5K
1.2
φ4.5
10.5
7.4
φ3
45˚
45
7
7
4
φ
4.
φ2
φ5.5
φ4.7
3.2
10.5
10
45˚
RX-80HRT-3CF
NEW
5° 11.5
° 11.5
RX-85HRT Series / Applicable Model (Grip)RX-852AS (RX-85GAS), RX-822AS (RX-85GAS)
9.7
47
RX-85HRT-7BC
11.5
6
11.5
R
0.
45°
45
RX-85HRT-7D
11.5
RX-85HRT-6K
8.2
14
6
11.5
7.5
7
5
11.5
5
RX-85HRT-5D
1.5
1.5
1.5
°
3
8
°
°
45
˚
3
RX-85HRT-3D
45°
7
RX-85HRT-5BC
11.5
5
5
RX-85HRT-3BC
11.5
5
3
11.5
4
RX-85HRT-2BC
2
RX-85HRT-B
RoHS
90
SOLDERING WORK
MATERIALS
45˚
2.5
6
SURFACE MOUNT / SMT
PRODUCTS
DESOLDERINGS
SOLDERING
ACCESSORIES
45˚
10
5
φ3
˚
10
0.5
φ1.2
RX-80HRT-2CF
NEW
φ
4.
RX-80HRT-5.5K
10.5
10
1.2
φ5.4
φ2.4
φ3.2
φ
4.
7
7
φ
4.
SOLDERING
SYSTEM
SOLDER POTS
RX-80HRT-4.5KH
RX-80HRT-1.6D
RX-80HRT-3K
1
5.4
45˚
˚
5.7
4.5
11.5
90
RX-80HRT-5.4D
10
6.5
7
3
˚
RX-80HRT-3.2D
10
6
φ
4.
0.4
10
φ
4.
7
10
RX-80HRT-2.4D
0.5
RX-80HRT-3CD
° 11.5
5.5
RX-80HRT-1.2D
φ0.8
φ4
3
φ
4.
0.4
76
HEATED TOOLS
9
3
RX-80HRT-0.8D
φ4.7
φ
4.
6
2
°
45 8.5
5
45
φ
4.
7
φ2
1.
2
45˚
RX-80HRT-4.7C
12
RX-80HRT-3C
11.5
˚
HAND TOOLS
°
φ3
RX-80HRT-2CD
° 11.5
45
5
φ2
°
45
60
20
60
0.5
45˚
1
RX-80HRT-4C
2
RX-80HRT-0.5C
3
φ
4.
7
10
5
5
φ
4.
7
RX-80HRT-3BC
° 10
45
3.6
2.3
RX-80HRT-2C
φ
4.
7
° 10
60
3
7
30˚
1
R0
.3
RX-80HRT-1C
0.5
12
5
R0
.3
RX-80HRT-2.3BC
° 8
45
3.5
RX-80HRT-LBJ
12.7
R0
.1
5
R0
.6
RX-80HRT-1BC
φ
4.
7
φ
4.
7
8.5
4.4
RX-80HRT-LB　RX-80HRT-LB
¥1,575 (税別¥1,500)
9
2.5
φ
4.
7
3
R0
.3
RX-80HRT-BM
φ
4.
7
RX-80HRT-SB
10
φ
4.
7
RX-80HRT-2B
φ
4.
7
φ
4.
7
8.5
4.5
φ
4.
7
RX-80HRT-B
60
SOLDERING STATIONS
45
SOLDERING
SYSTEM
8.0
49
RX-85HSRT-2BC
RX-85HSRT-3BC
RX-85HSRT-3.2D
RX-85HSRT-2.4D
11.5
5
2
R0
.3
45°
45°
11.5
5
0.8
0.8
RX-85HSRT-4.5K
90
11.5
6
14
4.5
˚
3.2
RX-85HSRT-1.6D
11.5
6
3
11.5
5
2.4
11.5
5
1.6
RX-85HSRT-B
RoHS
0.8
°
45
2.5
6.4
RX-80HRT-PH Series / Applicable Model (Grip)RX-802ASPH (RX-80GASPH)
RX-80HRT-PH2B
8.5
RX-80HRT-PHSB
RX-80HRT-PHLBJ
13
5
13
.3
.1
R0
R0
10
10
2.3
RX-80HRT-PH0.5C
9
R0
RX-80HRT-PH2CD
60
RX-80HRT-PH3C
RX-80HRT-PH3CD
11.5
11.5
2
1.2
1
3
11.5
3
11.5
2
9
RX-80HRT-PH2C
°
45
45
2
RX-80HRT-PH1C
°
°
45°
SURFACE MOUNT / SMT
PRODUCTS
.3
1
RX-80HRT-PH3BC
0.5
R0
8
8.5
RX-80HRT-PH2.3BC
5
SOLDER POTS
RX-80HRT-PH2B
RX-80HRT-PH1BC
30°
R0
RX-80HRT-PHLB
9
.6
.3
10
RX-80HRT-PHB
RX-80HRT-PHBM
RoHS
3
RX-80HRT-PHB
94
34
LEAD-FREE
SOLDERING STATIONS
RX-85HSRT Series / Applicable Model (Grip)RX-852AS (RX-85GAS), RX-822AS (RX-85GAS)
1.6
0.5
RX-80HRT-PH3K
RX-80HRT-PH4.5K
7
10.5
0.5
0.5
RX-80HRT-PH4.5KH
4.7
˚
60
2
10.5
45°
1
1.2
45°
1.2
45°
MATERIALS
10.5
3
2.4
RX-80HRT-PH5.4D
10
˚
90
10
10
RX-80HRT-PH1.6D
˚
60
10
RX-80HRT-PH3.2D
3.2
RX-80HRT-PH2.4D
RX-80HRT-PH1.2D
0.4
0.4
°
45
3
4.5
45°
10
45°
SOLDERING
ACCESSORIES
45°
0.8
7
RX-80HRT-PH0.8D
5.4
4
11.5
RX-80HRT-PH4.7C
4.7
RX-80HRT-PH4C
45°
2
1.2
45°
DESOLDERINGS
60°
HAND TOOLS
21
SOLDERING
SYSTEM
SOLDERING STATIONS
V-groove prevents
solder splash.
LEAD
RoHS ANTI
STATIC FREE
NEW
LEAD-FREE v-groove AUTOMATIC SOLDER FEEDER
FD-110
SOLDER-SPLASH PREVENTION
V-groove function
MAX Ø1.6 LEAD-FREE SOLDER APPLICABLE*
Wide tube
V-groove rollers are different according to solder diameter being used. Please let us know
your solder diameter when purchasing FD-110 .To replace or change v-groove rollers, please
feel free to contact us.
INNOVATIVE DESIGN MEANS FEWER CLOGS
●One-handed soldering work possible. ON/OFF switch is built into the Tube
Assy FD-100TA (sold separately).
COMPATIBLE WITH YOUR SOLDERING UNIT
●ø0.6-1.6mm lead-free solder applicable.
Handpiece shaped for smooth solder flow
for goot RX series soldering stations
*Please tell us your solder diameter when purchasing.
●Solder feed method for reducing solder clogs.
The solder in this image
is not included.
V-groove function
Grooved solder lets Solder cross section
flux vapor be released.
V-groove
Reduces splash. Reduces
defects.
Flux
■ Solder splash
(mm)
14
Without V-groove,
flux is scattered.
12
10
8
With V-groove, there is
little scattering of flux.
6
4
2
HAND TOOLS
HEATED TOOLS
SOLDERING WORK
MATERIALS
SOLDERING
ACCESSORIES
DESOLDERINGS
SURFACE MOUNT / SMT
PRODUCTS
SOLDER POTS
0
22
Flux
Solder
Without v-groove
Stable quality at less cost!
Fixed Solder Feed
LEAD
RoHS ANTI
STATIC FREE
LEAD-FREE AUTOMATIC SOLDER FEEDER
FD-100
Flux
Solder
With v-groove
MAX Ø1.6 LEAD-FREE SOLDER APPLICABLE
Wide tube
INNOVATIVE DESIGN MEANS FEWER CLOGS
Handpiece shaped for smooth solder flow
COMPATIBLE WITH YOUR SOLDERING UNIT
for goot RX series soldering stations
The solder in this image
is not included.
●One-handed soldering work possible. ON/
OFF switch is built into the Tube Assy FD100TA (sold separately).
●ø0.6-1.6mm lead-free solder applicable.
●Solder feed method for reducing solder
clogs.
The above photo is with optional parts. Solder, soldering unit,
and other optional parts are not included with this FD-100.
SOLDERING
SYSTEM
This image is with optional parts. Solder, soldering
unit, and other optional parts are not included with
this FD-100.
➃Tube Assy
➀Temperature-Controlled
➂Automatic Solder Feeder Unit
FD-100
Lead-Free Soldering Station
➄Guide Pipe
➁Tip (RX-80HRT-B)
■ FRONT PANEL (Common FD-100/110)


➀
➁
➂
➃
➄
➅

Temperature-Controlled
Lead-Free Soldering Station
Tip
Automatic Solder Feeder Unit
Tube Assy (Solder Dia. ø0.6–1.0)
Guide Pipe (for RX-80GAS)
Nozzle (Solder Dia. ø1.0)
FD-100TA-1.0
FD-100P-80
FD-100N-1.0
Tube Assy (Solder Dia.ø1.2–1.6)
FD-100TA-1.0
FD-100TA-1.6
GUIDE PIPE
Soldering unit RX-72GAS
FD-100P-72
NOZZLE
Solder Dia. φ0.6/0.65
FD-100N-0.6
Solder Dia. φ0.8
FD-100N-0.8
Solder Dia. φ1.0
FD-100N-1.0
Solder Dia. φ1.2
FD-100N-1.2
Solder Dia. φ1.6
FD-100N-1.6
Applicable Solder
Diameter
Solder Feed Speed
Solder Feed Time
Returned Solder Amount
Solder Feed Delay Time
Dimensions
Weight
FD-110
100–240V AC 50/60Hz
8W
1.5m inlet type
RX-802AS (with RX-80GAS)
RX-852AS (with RX-85GAS)
RX-822AS (with RX-80/85GAS)
RX-701/711AS (with RX-72GAS)
ø0.6–ø1.6mm
ø0.6, ø0.8, ø1.0, ø1.2, ø1.6mm
(LF solder applicable)
(LF solder applicable)
6–22mm/sec (unloaded)
0–4sec
0–5mm (fixed speed)
0–5sec
82(W) × 140(H) × 210(D)
82(W) × 149(H) × 210(D)
1.5kg (w/o solder)
1.6kg (w/o solder)
*FD-110 configured for your desired solder diameter.
HAND TOOLS
Feeder Pen (Solder Dia.ø1.2–1.6)
FD-100PN-1.6
Applicable Soldering Irons
FD-100
MATERIALS
FD-100P-80
MODEL
Voltage
Power Consumption
Power Cord Length
SOLDERING
ACCESSORIES
Tube Assy (Solder Dia.ø0.6–1.0)
Foot Switch
FD-100FS
FD-100
DESOLDERINGS
TUBE ASSY
Feeder Pen (Solder Dia.ø0.6–1.0)
FD-100PN-1.0
RX-80HRT-B
SPECIFICATIONS
FD-100P-85
RX-802AS
SURFACE MOUNT / SMT
PRODUCTS


FD-100 Sample comfiguration
SOLDER POTS

➊ Mode Changer
➋ Feed Time Adjuster
➌ Feed Speed Adjuster
➍ Main Power Switch
➎ Return Amount Adjuster ➏ Delay Time Adjuster
➅Nozzle
LEAD-FREE
SOLDERING STATIONS
SAMPLE CONFIGURATION
Constant feed volume.
Stable quality at lower cost.
To choose optional parts, please see p.24
23
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDER POTS
SURFACE MOUNT / SMT
PRODUCTS
DESOLDERINGS
CHOOSING OPTIONAL PARTS
1. Choose the suitable guide pipe for your soldering unit.
For RX-80GAS soldering unit
Applicable Guide Pipe
FD-100P-80
FD-100P-85
RX-80GAS
FD-100P-72
RX-85GAS
The standard soldering
unit came with
RX-72GAS
unit came with
RX-802AS/822AS.
unit came with
RX-852AS/822AS.
RX-701AS/711AS.
2. Choose the suitable nozzle and tube assy for your solder diameter.
Solder Dia.
0.6 / 0.65mm
0.8mm
1.0mm
1.2mm
Tube Assy
Tube Assy
Tube Assy
FD-100TA-1.0
Nozzle
Nozzle
FD-100N-0.6
Nozzle
FD-100N-0.8
FD-100TA-1.6
Nozzle
FD-100N-1.0
Nozzle
FD-100N-1.2
SOLDERING
ACCESSORIES
SOLDERING WORK
MATERIALS
HEATED TOOLS
HAND TOOLS
Nozzle
FD-100N-1.6
Feeder Pen
Feeder Pen
Feeder Pen
FD-100PN-1.0
NEW
ST-21 soldering iron stand for
RX-802AS/852AS/822AS
FD-100PN-1.6
Nozzle not included. Foot switch is required.
ST-27 soldering iron stand for
RX-701AS/711AS
If you don't have it, please purchase one. If you don't have it, please purchase one.
(The old ST-20 is not applicable)
(The old ST-77 is not applicable)
Foot Switch
24
1.6mm
FD-100FS

lead-free temperature-controlled soldering stations

Transcription

Similar documents

SOLDERING ACCESSORIES