Assembly Manual

Be Strong.™
Assembly Manual
NS 600X
Model: NS 600X
P/N: 001-7002 Rev A (09/29/2006)
TABLE OF CONTENTS
Before You Assemble..................... 3
Product Specifications................... 4
Product Features............................ 4
Parts List / Box Contents.............. 5
Exploded View................................ 6
Hardware and Tool List................. 7
Assembly Guide............................. 8
Warranty Information.................... 20
Contacting Nautilus....................... 21
before you assemble
Basic Assembly Principles
Here are a few basic tips that will aid in the assembly of the Nautilus® NS600X. By using these
principles, you can simplify each process and save yourself extra time and effort.
1. T
o make the assembly process go faster, gather the pieces you need for each step and
thoroughly read the assembly instructions for that step prior to starting assembly for the step.
2. W
hen tightening a locknut on a bolt, use a combination wrench to grip the locknut and ensure
that it is fastened securely.
3. W
hen attaching two pieces, gently lift and look through the bolt holes to help guide the bolt
through the holes.
4. A
s a general rule, and for all bolts and nuts on your NS600X Home Gym, turn bolts or nuts
toward the right to tighten and left to loosen. Or you can remember the mnemonic: “Righty
tighty, lefty loosey.”
Before you assemble
• At least 2 persons reccomended for assembly and installation.
Familiarize yourself with the illustrations to understand what the assembled NS600X will look like.
Select where you are going to locate your NS600X carefully. Assemble your NS600X in the location
and position where you intend to use it. You will need at least 36 inches (.91 meters) on each side of
the NS600X and 36 inches (.91 meters) behind your NS600X during assembly. The rear of the NS600X
can be closer to the wall during use but it is difficult to move after assembly and some room is needed
during assembly.
Nautilus NS600X
NS600-X
REF#
PART#
1
3
4
5
6
7
8
9
10
11
12
13
14
15
17
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
001-3474
001-3444
001-3475
001-3493
001-3513
001-3426
001-3425
001-3433
001-3422
001-3420
001-3429
001-3428
001-3430
001-3431
001-3472
001-3450
001-3471
14128
001-3421
14456
001-3501
001-3441
001-3440
001-3432
001-3434
001-3434
001-3506
001-3470
001-3419
14493
95262
001-3480
001-3462
92058
14460
14100
001-3466
14173
14185
14111
14110
001-3468
14205
14427
001-3507
14176
14102
14791
14792
14793
14794
901-7714
901-7654
901-7653
DESCRIPTION
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
BASE MAIN NS 600 NS-X
Frame Top NS-X
UPRT FRNT NS 600 NS-X
ASSY LEG EXT FRM NS-X
MOUNT PULY NS-X
Frame Lower Pulley Calf Raise NS-X
Frame Top Stck Support NS-X
Cable Housing NS-X
Plate Backing 2 In NS-X
Plate Backing 3 In NS-X
Assy Press Arm Support NS-X
Press Arm NS-X
Handle Press Arm Right NS-X
Handle Press Arm Left NS-X
CAM PEC FLY NS-X
Pec Fly Handle NS-X
BRKT PEC FLY PULY NS-X
ADJUSTMENT,SEAT,NS CHROME
Tube Seat Cross NS-X
ADJUSTMENT BACKREST
PLATE BACKREST ADJ NS-X
Seat Pad NS-X
Back Pad NS-X
Floating Pulley Bracket NS-X
Double Floating Pulley Bracket NS-X
Double Floating Pulley Bracket NS-X
Guide Rod Holder NS-X
CVR LOW PULY NS-X
Back Pad Adjustment pop pin NS-X
ROLLER PU
NS Foam Roller 8"L
ENDCAP PU ROLLER NS-X
Leg Ext. Roller End Cap NS-X
2 3/8" Plastic Washer
BAR LOCKING ROLLER
Bar Roller
Plastic Cap NS-X
3 1/2" Pulley
4 1/2" Pulley
Shaft Press Arm Support
Shaft Press Arm Pivot
Snap Cap Large NS-X
Top Weight
Wt Plate Each NS 10LB Gray
Plate Weight Stack Bottom NS-X
Weight Stack Cushion
Guide Rod
CBL PULLDOWN
CBL AB CRUNCH
CBL LOW ROW
CBL PEC FLY
BOLT HEX 1/2X3-1/4 NS-X
Hex Bolt 3/8" x 4 1/2"L NS-X
Hex Bolt 3/8" x 4 1/4"L NS-X
NS600-X
REF#
PART#
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
95
96
97
98
99
901-7652
901-7649
901-7648
901-7647
901-7645
901-7644
901-7643
901-3678
901-8025
902-6620
901-8109
902-6681
14476
902-2657
902-3648
92164
902-2909
902-2905
92122
92331
14795
901-6563
902-8334
001-3423
14215
14217
14384
92053
001-3437
92054
001-3443
001-3394
14535
001-3669
001-3588
001-3657
14160
14161
14175
14178
14179
14180
14184
14201
14206
14271
14429
14432
14433
14449
14450
14452
14468
14470
DESCRIPTION
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Hex Bolt - 3/8" x 4"L NS-X
Hex Bolt - 3/8" x 3 1/4"L NS-X
Hex Bolt 3/8" x 3"L NS-X
Hex Bolt 3/8" x 2 3/4"L NS-X
Hex Bolt 3/8" x 2 1/4"L NS-X
Hex Bolt 3/8" x 2"L NS-X
Hex Bolt 3/8" x 1 3/4"L NS-X
BOLT HEX 3/8X1 - WLCKTITE NS-X
Cap Head Screw 1"L w/ locktite NS-X
BH dia 1/4" - 20 UNC x 1/2"L, with thread lock NS-X
Button Head Screw 1 3/4"L NS-X
BH Screw 1"L w/locktite NS-X
WSH FLAT 1 11/32" X 1"
Flat Washer 1" x 1/2" NS-X
WASHER FLAT 3/8 NS-X
Shim Washer
1/2" Lock Nut NS-X
NS LOCK NUT HEX NYLON 3/8" NS-X
Pulley Spacer 1"L
Step Spacer 5/8"H
SPACER STEP 1"
Set Screw 5/16 x 1/4"L NS-X
SET SCREW 5/16X1/4 LCKTITE NS-X
Rower Bar NS-X
AB Strap
Felt Back Ankle Strap
Handle Strap with 2 rings
CHAIN WTSTK 12 LINK
Lat Bar NS-X
CABLE CLIP WTSTK LG
Weight Selector Pin NS-X
PAINT TOUCH UP NS-X
PAINT TOUCH UP GRAY
KIT,OM/AM NSX600
NS 600 Decal Kit
NS-X CURVED WASHER M10.5x23x2T
Pec Fly Bumper
Lat Bar Hook Cover
Top weight Bushing
Press Arm Stop
Back Adjustment Stop
Back Adjustment Handle Cover
Protection Label
Step Spacer 31.1x25.1x47.5h
GRIP TAP[E 8" X 6"
6905 Bearing
DECAL WEIGHT PLATE
Spacer 35x36x2T
Washer Spacer 25.5*41.5*1T
SHAFT STEEL PULY
SHAFT PIVOT LEG EXT
ASSY SEAT
BRKT SMALL PULY
PULY LT STEEL
NS600-X
REF#
PART#
14474
14477
14478
14482
14484
14487
14489
14490
14491
14497
14508
14530
14621
14796
17057
92189
93472
98780
000-6953
001-3393
001-3419
001-3445
001-3454
001-3458
001-3459
001-3460
001-3461
001-3463
001-3464
001-3465
001-3467
001-3469
001-3476
001-3477
001-3478
001-3479
001-3482
001-3508
001-3662
901-7216
901-7251
901-7308
901-7312
901-8114
901-8155
902-2949
902-3638
902-6679
902-8333
DESCRIPTION
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
PULY RT STEEL
SPACER PULLEY 35X26X12.8T
PIN DBLE PULY LOCKPIN W/CLIPS
PULY 6"
ASSY DBLE PULY
PULY SMALL
Hand Grip 6"L
Hand Grip 7 1/2"L
SPACER STEP 25X17X25.7H
CABLE,PULLEY
BEARING 6205
BOLT FLAT HD 3/8X3 LCKTITE
1 3/8" Plastic Washer
NS 600 Step Spacer 21/32"H
1/4" Lock Nut
Step Spacer 31 x 25.1 x 20h
SPACER STEP 19.45X12.8X18H
Nautilus Logo Plate
BUSHING WT PLATE
Foot Cap NS-X
Back Pad Adjustment pop pin NS-X
Handle,Pop Pin,NS-X Series
CAP PLSTC NS-X
1 3/4" Square End Cap NS-X
End Cap, 2" Square NS-X
End Cap, 1" x 2" Rectangular NS-X
Roller End Cap NS-X
ENDCAP 1-1/2X2 NS-X
End Cap, 2" x 3" Rectangular NS-X
End Cap, 1 3/4" x 2" Rectangle NS-X
Snap Cap NS-X
PLATE CVR LEG EXT NS-X
ASSY LEG EXT NS-X
BRACKET LEVER NS-X
PIN LOCKING LEG HOLD DOWN NS-X
POP PIN LEG EXT NS-X
Press Arm Seat Pad NS-X
SHROUD,RR,NS200,300,600X
BRKT SMALL PULY
BH #8 x 5/8"L NS-X
BH Allen Screw 1/4" x 3/4" NS-X
BOLT HEX 3/8X3/4 NS-X
BOLT HEX 3/8X1-1/2 NS-X
Cap Head Screw 3"L w/locktite NS-X
Cap Head Screw 7/16 x 1 1/2"L NS-X
NUT HEX 1/2X11T 13UNC NS-X
Flat Washer 1/4" NS-X
BOLT BTN HD 3/8X3/4 LCKTITE NS-X
SET SCREW 3/8X1 LCKTITE NS-X
product Specifications
NOTE: All instructions in the manual are given with the orientation
of sitting on the machine ready to exercise.
User Weight Capacity:
300lbs / 136.1Kg
Dimensions:
47”w x 72”l x 83”h / 119 cm x 183 cm x 211cm
Shipping Weight:
474.4 lbs / 215.2 kg
Net Weight:
408.3 lbs / 185.2 kg
product features
Workout Placard
Lat Pulldown Bar
Press Arm Adjustment
Multi Handle Grip
Adjustable Seat Back
Primary Weight Stack
Leg Extension
Seat Height Adjustment
Exploded view
12
45
11
47
46
13
31
3
10
88
8
4
32
30
28
27
14
24
25
15
29
2
44b
44
6
23
5
26
52
22
9
20
48
34
41
49
18
21
1
19
33
39
43
36
42
40
38
7
90
37
35
17
51
75
16
85
86
89
87
83
84
A. Compare the Bill of Materials to the box contents to insure that all parts are present before installation begins.
B. Unpackage parts and place them near the final asssembled location to avoid moving the gym when fully assembled.
50
Hex Bolt
4”
Shim Washer
5”
Hardware and tools
3”
Button Head
Lock Nut
Flat Washer
Step Spacer
1”
2”
Cap Head
Flat Head
Self Drilling
Cable Clip
Required Tools:
9/16” or 14mm Wrench or Socket (Two Required)
3/4” Wrench or Socket
Adjustable Wrench
4, 5, 6 and 8mm Allen Wrenches (Included w/ Gym)
Nautilus NS600X
WARRANTY INFORMATION
What Is Covered
Nautilus Fitness Products warrants to the original purchaser
of this Nautilus Home Gym to be free from defects in
materials or workmanship, with the exceptions stated below.
This warranty is not transferable or applicable to any person
other than the original purchaser.
Nautilus Home Gyms
The frame and welds of the Nautilus Home Gyms are
warrantied to the original purchaser for life from date of
original purchaser. Upholstery, pulleys, bushings and
bearings are warrantied for ten years to the original
purchaser from date of purchase. Cables, grips, and all other
parts are warrantied to the original purchaser for a period of
1 year from date of purchase.
Warranties Do Not Cover
• A machine purchased for commercial or institutional use.
• Damage due to use by persons who weigh more than 300
pounds.
• Damage due to abuse, misuse, accident or acts of God
(such as floods).
• Consequential or incidental damages.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
20
What We Will Do
Nautilus Fitness Products will repair any product that proves
to be a defect in materials or workmanship. In the event repair
is not possible, Nautilus Fitness Products, at its option, will
either replace your Nautilus Home Gym or refund your
purchase price.
How To Get Service
To obtain service for a Nautilus Fitness Product, contact an
authorized Nautilus Fitness Retailer. You may also contact a
Nautilus company representative at 800-864-1270 to help you
locate a dealer in your area.
How State Law Applies
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
IMPORTANT CONTACT NUMBERS
If you need assistance, please have both the serial number of your machine and the date of purchase available when you
contact the appropriate Nautilus office listed below.
WORLDWIDE CUSTOMER SERVICE
INTERNATIONAL CUSTOMER SERVICE
• NORTH AMERICA OFFICE
Nautilus, Inc.
World Headquarters
16400 S.E. Nautilus Drive
Vancouver, Washington, USA 98683
Phone: 800-NAUTILUS (628-8458)
Fax: 800-686-6466
e-mail: [email protected]
• INTERNATIONAL OFFICE
Nautilus International S.A.
Rue Jean Prouvé 6
1762 Givisiez / Switzerland
Tel: +41-26-460-77-77
Fax: +41-26-460-77-70
E-mail: [email protected]
• NAUTILUS INNOVATION CENTER
Nautilus, Inc.
1886 Prairie Way
Louisville, Colorado, USA 80027
Phone: 800-864-1270
Fax: 800-898-9410
INTERNATIONAL OFFICES:
• CORPORATE HEADQUARTERS
Nautilus, Inc.
World Headquarters
16400 S.E. Nautilus Drive
Vancouver, Washington, USA 98683
Phone: 800-NAUTILUS
• GERMANY and AUSTRIA OFFICE
Nautilus GmbH
Tel: +49 2203/20 20-0
Fax: +49 2203/20 20-45 45
• SWITZERLAND OFFICE
Nautilus Switzerland S.A.
Tel: +41-26-460-77-66
Fax: +41-26-460-77-60
• ITALY OFFICE
Nautilus Italy s.r.l.
Tel: +39-051-664-6201
Fax: +39-051-664-7461
• UNITED KINGDOM OFFICE
Nautilus UK Ltd.
Tel: +44-1908-267-345
Fax: +44-1908-267-346
•C
HINA OFFICE
Nautilus Representative Office
Tel: +86-21-523-707-00
Fax: +86-21-523-707-09
Nautilus NS600X
21
Be Strong.™
For more information about our Nautilus Home Gyms or other Nautilus ®
equipment for your home, visit www.Nautilus.com.
© 2006 Nautilus, Inc. All rights reserved. Nautilus, the Nautilus logo, My Nautilus, Heart Strong, Changing the Game in Health and Fitness, REACT, ROC, Remote Operation Control, SuperSoft, Hyperdrive, Be Strong
are either registered trademarks or trademarks of Nautilus, Inc.
Nautilus, Inc. World Headquarters, 16400 SE Nautilus Drive, Vancouver, Washington, USA 98683, 1-800-628-8458, www.Nautilus.com.
22