Drawer Guides-Door Closure Announcement - Kitchens

Transcription

Unfinished Furniture KC
| 9130 Marshall
| Lenexa, KS | 913-894-5283
Dr
The following pages help you get an idea of some of the cabinets Medallion offers and the
ways in which these cabinets can be integrated into your kitchen design. Please keep in
mind, dimensions and cabinets shown in this guide are to give you an overall idea of what
is offered, a design specialist should be consulted to verify measurements and availability
before ordering. We hope you find this guide helpful and enjoy your new Medallion
dream kitchen.
Table of Contents
Design & Planning Guide (Designer Gold/Designer)
Wall Cabinets..........................................................................2
Component Wood Hoods ........................................................7
Alcove Hoods ..........................................................................10
Base Cabinets..........................................................................14
Oven Cabinets ........................................................................18
Islands ....................................................................................20
Component Islands..................................................................24
Vanities....................................................................................26
Other Room Cabinets ..............................................................30
Molding and Accessories........................................................33
Wall Cabinets
Bella Oak Wheat; Gable Quartersawn Oak Walnut
2
2
2
1
1
4
1
1
1
4
4
9
3
6
5
5
10
8
7
7
1. Wall Cabinet; Modify Height (W_B; MH)
6. Wall Cabinet; Modify Depth (W_B; MD)
2. Arts & Crafts Trim Molding (ACTRM8)
7. Shaker Corbel (CBLMS)
3. Counter Wall Appliance Garage;
8. Profile Solid Stock L (PSSL)
Modify Depth (WTDAG_B; MD)
4. Stepped Crown Molding (STPCRN8)
5. Wall Cabinet; Flush End Both (W; WFEB)
9. Deluxe Dish Drawer Front Panel;
Modify Height (DDFPSD; MH)
10. Deluxe Refrigerator Panel (DRFP)
Design Note:
Arts & Crafts Trim Molding was applied
to the wall surrounding the cabinets to
highlight the built-in cabinet look.
Wall Cabinets • 12" & 24" Depths
(W)
Widths: 9"- 24"
Heights: 12"- 42"
(W, W_B)
Widths: 24"- 48"
Heights: 12"- 42"
(W_F)
Widths: 48"
Heights: 12"- 42"
(WVL*)
Widths: 18"- 36"
Heights: 18", 21"
(TDW_B**)
Widths: 24"-36"
Heights: 12"-27"
Depth: 24"
SKU (WVL) widths of 27" - 36" are available on Bella door style only. Standard 24" depth cabinetry available in limited sizes. **SKU (TDW_B) also available with One Door in 18"-24" widths and 24" height
Counter Wall Cabinets with Drawers • 12" Deep
(WDC)
Widths: 15"- 24"
Heights: 48", 54", 57", 60"
(W2D)
Widths: 15"- 24"
Heights: 48", 54", 57", 60"
(WDG)
Widths: 15"- 24"
Heights: 48", 54", 57", 60"
(WDC, WDC_B)
Widths: 24"- 36"
Heights: 48", 54", 57", 60"
(W2D, W2D_B)
Widths: 24"-36"
Heights: 48", 54", 57", 60"
(WDG, WDG_B)
Widths: 24"- 36"
Heights: 48", 54", 57", 60"
Counter Wall Cabinets with Appliance Garage • 12" Deep
(WAG)
Widths: 15"- 24"
Heights: 48", 54", 57", 60"
(WDAG)
Widths: 15"- 24"
Heights: 48", 54", 57", 60"
(WAG_B)
Widths: 24"- 36"
Heights: 48", 54", 57", 60"
(WDAG_B)
Widths: 24"- 36"
Heights: 48", 54", 57", 60"
Counter Wall Cabinets with Full-Height Doors • 12" Deep
Bake Center
(CW)
Widths: 12"- 24"
Heights: 48", 54", 57", 60"
(BCPD)
Widths: 30"-36"
Heights: 48", 54", 57", 60"
Depths: 15"-24"
(CW, CW_B)
Widths: 24"- 36"
Heights: 48", 54", 57", 60"
Sizes indicate an overview of cabinet SKUs, please see a design specialist for specific cabinet dimensions.
Standard cabinet dimensions are typically in 3" increments. Designer Gold and Designer cabinetry offer you greater flexibility
with standard width, depth and height modifications in 1/4" increments. Please consutl a design specialist for size and modification details.
(WTDAG_B*)
Widths: 24"- 27"
Heights: 48", 54", 57", 60"
* Available with One Door
in 15"-24" Widths
Design & Planning Guide
Wall Cabinets
3
Wall Blind Corner Cabinets • 12" Deep
(WBC)
Widths: 24"- 36"
Heights: 30", 36", 39", 42"
(PWBC)
Widths: 24"- 48"
Heights: 18"- 30"
Microwave Shelf
(WBC, WBC_B)
Widths: 39"- 48"
Height: 30"
(WBCAG)
Widths: 27"- 39"
Height: 48", 54", 57", 60"
(PMS)
Widths: 27", 30"
Heights: 18"
(BMW_B, BMW)
Widths: 24"- 36"
Heights: 30", 36", 39", 42"
Depth: 18" or 21"
(BMWT_B, BMWT)
Width: 24"- 36"
Heights: 48", 54", 57", 60"
Depth: 18", 21"
(DWMD)
Widths: 30", 33"
Heights: 48", 54", 57', 60"
Wall Microwave Cabinets
(PMW_B, PMW)
Widths: 24"- 30"
Heights: 30", 36", 39", 42"
Depth: 12" (17" from back to lip of shelf)
(BMWD_B, BMWD)
Width: 24"- 36"
Heights: 48", 54", 57", 60"
Depth: 18", 21"
Diagonal Corner Wall Cabinets
(LSDW)
(DW, LSDW)
Widths: 21"- 27" (back dimensions)
Heights: 24", 30", 36", 39", 42"
(PDW)
Widths: 21"- 27"
Heights: 24", 30", 36", 39", 42"
(DWD*)
Widths: 24", 27"
Heights: 30", 36", 39", 42"
(LDWAG)
(LDWDAG)
(DWAG, LDWAG)
Widths: 24", 27" (back dimensions)
Heights: 48", 54", 57", 60"
(DWDAG, LDWDAG)
Widths: 24", 27" (back dimensions)
Heights: 48", 54", 57", 60"
*Sku (DWD) also available as a counter cabinet in 48", 54", 57" and 60" heights.
Square Corner Wall Cabinets • 12" Deep
Angled Wall Cabinets
(135˚)
(135˚)
(PSCW)
(SCW, PSCW)
Widths: 24" (back dimensions)
Heights: 24", 30", 36", 39", 42"
(ACW_L_R_)
Widths: 21" one back dimension (L or R)
24" for opposite back dimension
Heights: 24", 30", 36", 39", 42"
4
Wall Cabinets
(WODSCW)
Widths: 24"
Heights: 30", 36", 39", 42"
(W_COA)
Widths: 6" - 12" (back dimensions)
Heights: 30", 36", 39", 42"
(W_CIA)
Widths: 21"- 27" (back dimensions)
Heights: 30", 36", 39", 42"
Angled Wall Cabinets
(WAC)
Width:12"
Heights: 30", 36", 39", 42"
(WAC)
Width: 24"
Heights: 30", 36", 39", 42"
(DWC)
Width: 12"- 24"
Heights: 30", 36", 39", 42"
(WZD)
Width: 12"
Heights: 24", 30", 36", 39", 42"
Available in left or right configuration
18"- 24" widths are butt doors
Available in left or right configuration
(WUD_B)*
Widths: 24"-36"
Heights: 30", 36", 39", 42"
(WLD_B)*
Widths: 24"-36"
Heights: 30", 36", 39", 42"
Decorative Display Wall Cabinets
(BK)
Widths: 18"- 36"
Heights: 12"- 30", 36"- 42", 48",
54"- 60", 66"
(WODPR)
Widths: 18"-36"
Heights: 30", 36", 39", 42"
(WPRD)
Widths: 15"-24"
Heights: 30", 36", 39", 42"
Available with Butt Doors in 24"- 36" widths
*Various valance options available. Consult your design specialist for details.
Wine & Spice Wall Cabinets • 12" Deep
(WWC)
(WSRCF)
Horizontal Shown
(SDC)
(WWC, SDC)*
Widths: 6"
Heights: 12", 18", 24", 30", 36", 42"
Can be used vertically or horizontally
(WR)*
Horizontal Widths: 24"- 36"
Heights: 15", 18", 24"
Vertical Widths: 15"- 24"
Heights: 30", 36", 39", 42"
(WWCD)*
Widths: 12"
Heights: 12", 18", 24", 30", 36", 42"
(WDSR)
Widths: 15"- 24"
Heights: 30", 36", 39", 42"
(WSRC, WSRCF)*
Widths: 3"- 6"
Heights: 30", 36", 39", 42"
Can be used vertically or horizontally
*SKUs also available in base cabinets (BSDC in 21" and 24" depths, BWC, BFHWR, BWCD)
Wine & Spice Wall Cabinets
(4 Openings)
(8 Openings)
(WCCSR)
(WFCCSR, WCCSR)*
Widths: 3"- 6"
Heights: 30", 36", 39", 42"
Matching Door SKUs also available in 6"
width only (WDCCSR). Depths are dependent on widths, consult your design specialist for details.
(4 Openings)
(WPS)*
Widths: 9"-12"
Heights: 30"
Depths: 12"-15"
(2 Openings)
(WCWS)
Widths: 12"-24"
Heights: 12"-24"
Depth: 12"
(WCWS)
Widths: 12"-24"
Heights: 24"-48"
Depth: 12"
12"-15" widths and heights
recieve 2 openings
Can be used vertically or horizontally,
12"-15" widths/heights recieve 4 openings
*SKUs also available in base cabinets (BFCCSR, BCCSR, BDCCSR, BPS, BCWS)
Sizes indicate an overview of cabinet SKUs, please see a design specialist for specific cabinet dimensions.
Standard cabinet dimensions are typically in 3" increments. Designer Gold and Designer cabinetry offer you greater flexibility
with standard width, depth and height modifications in 1/4" increments. Please consult a design specialist for size and modification details.
Wall Cabinets
5
Open Shelf Wall Units
(WN_ST*)
(PWN_ST)
(CDWS_M)
(CDWS)
(WN, WN_ST*)
Width: 6"
Heights: 30", 36", 39", 42"
Depth: 12"
(PWN, PWN_ST)*
Width: 12"
Heights: 24", 30", 36", 39", 42"
Depth: 61⁄2"
*SKUs available in base cabinets (BWN_ST, PBWN, PBWN_ST) and tall cabinets (UWN, UWN_ST)
(DWS, CDWS)
Widths: 12"- 24"
Height: 9"
(DWS_M, CDWS_M)
Widths: 12"- 24"
Height: 9"
(CDWS) is available in 24" Width only.
(back dimensions)
(CDWS_M) is available in 24" Width only.
(back dimensions)
Under Cabinetry Components • 12" Deep
(AG)
Widths: 15"- 36"
Height: 18"
(DAG)
Widths: 24", 27"
Height: 18"
(WPR)
Widths: 15"- 36"
Height: 15"
One Piece Wood Hoods • 36", 42", 48", 54" Widths
(RHDXDAV)
Height: 35"
Depths: 213⁄4", 243⁄4"
(ORHPMPT)*
Height: 30"
Depths: 21", 24"
(ORHPMWCT)*
Height: 30"
Depths: 21", 24"
(ORHPMDXT)*
Height: 30"
Depths: 21", 24"
(ORHDXMPT)
Height: 30"
Depths: 21", 24"
(ORHDXMWCT)
Height: 30"
Depths: 21", 24"
(ORHDXMDXT)
Height: 30"
Depths: 21", 24"
(ORHFFMFCT)
Height: 30"
Depths: 21", 24"
*SKU also available with one-piece onlay modification. See your design specialist for onlay options.
6
Wall Cabinets/One Piece Wood Hoods
Component Wood Hoods
Knotty Alder Walnut Glazed Ebony
1
2
3
6
4
1. Plywood Panel (PNL)
5. Hood Liner (RHLNR)
2. Scallop Valance (VAL)
6.Tall Fluted Filler, modify depth and height,
3. Wainscot Angled Transition (RHTWC)
Flush Finished Wood End
4. Plain Mantel (RHM)
(UEPFF, MD, MH, UFEB)*
* Item is a Custom Quote
5
6
Design Note:
Using our component hood program is
an easy way to create a focal point in
your kitchen. Adding other decorative
elements to your design gives emphasis
to your focal point.
The Wood Hood Component program enables you to create a customized wood hood by choosing from our
three part system of components (chimney, transition and mantel) which are available in a variety of styles and sizes.
Top Component
Chimney
Middle Component
Transition
Bottom Component
Mantel
Chimneys • 12" Height
(RHC)
Widths: 36"- 54"
Depths: 9"- 12"
(RHCWC)
Widths: 36"- 54"
Depths: 9"- 12"
(RHSDX)
Widths: 30"- 54"
Depths: 9", 12", 21", 24"
(RHTWC)
Widths: 36"- 54"
Depths: 21", 24"
(RHTDXAF)
Widths: 30"- 54"
Depths: 21", 24"
Transitions • 191⁄4" Height
(RHTR)
Widths: 36"- 54"
Depths: 21", 24"
(RHTDX)
Widths: 30"- 54"
Depths: 21", 24"
*Transition components now feature removable fronts for easier installaion of component as well as the blower unit and venting
Mantels
(RHMO) plus onlay modification
Widths: 30"- 54"
Depths: 21", 24"
Height: 103⁄4"
(RHM)
Widths: 30"- 54"
Depths: 21", 24"
Height: 103⁄4"
8
Component Wood Hoods
(RHMDX)
Widths: 30"- 54"
Depths: 21", 24"
Height: 10"
(RHDAV)
Widths: 36"- 54"
Depths: 21"- 24"
Height: 141⁄4"
The Peninsula Wood Hood Component program enables you to create a customized peninsula wood hood by choosing from our
three part system of components (chimney, transition and mantel) which are available in a variety of styles and sizes.
Top Component
Chimney
Middle Component
Transition
Bottom Component
Mantel
Chimneys • 18" Height
(PRHC)
Widths: 36", 42", 48", 54"
Depths: 121⁄2", 151⁄2"
(PRHCW)
Widths: 36", 42", 48", 54"
Depths: 131⁄4", 161⁄4"
(PRHSDX)
Widths: 36", 42", 48", 54"
Depths: 121⁄2", 151⁄2", 283⁄4", 313⁄4"
Transitions • 131⁄4" Height
(PRHTR)
Widths: 36", 42", 48", 54"
Depths: 27", 30"
(PRHTWC)
Widths: 36", 42", 48", 54"
Depths: 27", 30"
(PRHTDXAF)
Widths: 36", 42", 48", 54"
Depths: 27", 30"
(PRHTDX)
Widths: 36", 42", 48", 54"
Depths: 27", 30"
*Transition components now feature removable fronts for easier installaion of component as well as the blower unit and venting
Mantels
(PRHM)
Widths: 36", 42", 48", 54"
Depths: 27", 30"
Height: 103⁄4"
(PRHM) with onlay modification
Widths: 36", 42", 48", 54"
Depths: 27", 30"
Height: 103⁄4"
(PRHMDX)
Widths: 36", 42", 48", 54"
Depths: 27", 30"
Height: 10"
(PRHDAV)
Widths: 36", 42", 48", 54"
Depths: 27", 30"
Height: 141⁄4"
Range Hood Fronts • 12" Depth
(RH_PT)
Widths: 30", 36"
Height: 24"
(RH_WT)
Widths: 30", 36"
Height: 24"
(RH_DX)
Widths: 30", 36"
Height: 24"
Wood Hoods
9
Alcove Hoods
Ellison Maple White Chocolate
1
2
3
4
6b
6d
6c
6a
6a
5
1. Classic Large Crown (CLCM8)
2. Profiled Solid Stock J (PSSJ)
3. Hamlet Frieze Molding (HAML8)
4. Profiled Solid Stock M (PSSM)
5. Profiled Solid Stock G (PSSG)
5
6. Alcove Hood
a. Column E, lower pull-out spice rack;
Whitney Corbel (CBLE1; CBLWHTNYM1)
b. Deluxe Front Soffit; Modify Width
(AHSDX; MW)
c. Deluxe Front Mantel; Modify Width
(MNTLDX; MW)
d. Ledge Modify Width; Profiled
Solid Stock F; Small Crown Molding
(LEDGE; MW; PSSF; SMCRN)
Design Note:
The Alcove Hood Program offers
over 300 configurations in
designing a focal point that is both
functional and beautiful. Available
are 9 mantel designs, 14 decorative onlay options, 3 decorative
soffit designs and 13 column designs with 19 corbel options. Storage options are available in the
lower section of select columns,
including hinged door cabinets,
drawer units and pull-out storage
racks. Mix and match to create a
truly customized look.
Alcove Hood Program
The Alcove Hood Program allows you to create a custom style hood
by choosing from a variety of components. Over 300 combinations of
hoods are available through this program. An Alcove Hood consists
of two columns, a soffit*, mantel and ledge. Each of these
components is available in a variety of options. Create an
extravagant hood that complements your style by mixing and
matching the components shown on these pages.
Columns
Soffit
Dimensions below are to give a general idea of the area needed to
include an Alcove Hood in your kitchen design, please see a design
specialist for details.
Ledge
Widths: 54" - 108"
Heights: 51" - 84"
Mantel
*Soffit options include plywood front, wainscot or deluxe panel
as shown.
Alcove Hood Examples
12
Alcove Hoods
Column Options
(CLMA)*
Plain Plywood Fronts
(CLMB)*
Deluxe Upper Panel/Plain
Lower Panel
(CLMC)*
Deluxe Upper and Lower Panels
(CLMD)
Deluxe Upper Panel/Hinged Door in
Lower Section
(CLMD) with Corbel modification
Deluxe Upper Panel/Hinged Door in
Lower Section
(CLME)
Deluxe Upper Panel/Pull-Out Storage
Rack in Lower Section
(CLME) with Corbel modification
Deluxe Upper Panel/Pull-Out Storage
Rack in Lower Section
(CLMF)*
Deluxe Upper Panel/2 Drawer Stack
in Lower Section
(CLMG)*
in Lower Section
(CLMH)
with Drawer Front in Lower Section
(MNTLPRV)
Plain Front Mantel with Provincial
Valance modification
*Available with corbel modification. See your design specialist for more details and corbel options.
Mantel Options
(MNTL)
Plain Front Mantel
(MNTL)
Plain Front Mantel with
Onlay modification
(MNTLAV)
Plain Front Mantel with Arch
(MNTLMV)
Plain Front Mantel with Mission
(MNTLRV)
Plain Front Mantel with Roman
(MNTLSV)
Plain Front Mantel with Scalloped
(MNTLDX)
Deluxe Front Mantel
(MNTLDAV)
Deluxe Arch Front Mantel
Alcove Hoods
13
Base Cabinets
Mendocino Rustic Maple Natural with Chestnut Accents
1
2
3
4
5
1. Three Drawer Base with a Flush Finished
4. Base Full Height Corner Inside Angle with
End, Drawer Organization insert in top
width and stile modifications (BFH_CIA;
drawer and Bread Box Accessory in
MW; BWS_B)
middle drawer.
(3DB; BFE; DOT; BBI)
2. Sink Base Cabinet with Stainless Steel Tilt
Out Tray and Undersink Storage Unit
(SB_B; ISST; ISUP)
3. Base Cabinet with Full Height
Waste Basket (BFH_WB; BWS_B)
5. Two Drawer Base with Peg Board Drawer
Organizer in top drawer and Deep Drawer
Divider in bottom drawer
(2DB; IPEG_T; IDD_B
Design Note:
Better utilize your space by adding
accessories and storage modifications
to your cabinetry. Conceal and organize
every day kitchen items inside beautiful
cabinetry.
Base Cabinets with Doors & Drawers
(SOSB)
(SOSB_B)
(B, B2D, B_S, SOSB)
Widths: 9"-24"
(B_B, B2D_B,B_BS, SOSB)
Widths: 24"- 36"
(B, B2D, B_S, SOSB)
Widths: 30"- 48"
Available with one (B_S) or two (SOSB)
Slide-Outs
Available with one (B_S) or two (SOSB)
Slide-Outs
Available with two (B_S) or four (SOSB)
Slide-Outs
(B_F)
Widths: 48"
Full-Height Door Base Cabinets • 341⁄2" & 401⁄2" Heights; 12" & 24" Depths
(BFH)
Widths: 9"- 24"
(BFH_B)
Widths: 24"- 36"
(BFH)
Widths: 30"- 48"
(BFH_F)
Width: 48"
Peninsula Base Cabinets
(PCBFH_B)
(PB)
Widths: 15"- 24"
(PB_B)
Widths: 24"- 36"
(PB)
Widths: 30"- 36"
(PCB_B, PCBFH_B)
Width: 27"
Available with top drawer (PCB_B) or
full-height doors (PCBFH_B)
Blind Corner Cabinets
(BBC)
Widths: 36"- 48"
(PBBC)
Widths: 36"- 48"
(BBCSOS)
Widths: 42"- 48"
(BFHBC)
Width: 48"
(BPC_B)
Width: 36"
(BFH_MX)
18"- 24"
(B_IB)
Width: 18"
Specialty Base Cabinets
(RBCB, RBCB_B)
Widths: 18"- 24"
(TB)
Width: 9"
Base Cabinets
15
Specialty Cabinets
(BKB)
(TDC)
Widths: 12"- 18"
(ECBT)
Widths: 9"- 12"
(BKB, BOD)
Widths: 18"- 36"
Heights: 34½", 40½"
Depths: 12", 18"
(BODWR)
Widths: 18"- 24"
Depth: 12"
(B_WI)
Widths: 15"- 18"
Various valance options available
(B_WB)
Widths: 15"- 18"
(B_WB, B_DWB)
Widths: 18"- 21"
(BFH_WB)
Width: 15"- 21"
(B4RC)
Width: 24"
Drawer Base Cabinets
(3DB_WK)
(3DB_IG)
(4BD)
(2BD, 3DB_IG, 4BD)
Widths: 15"-36"
(DB)
Widths: 12"- 36"
Height: 181/4"
Depths: 21", 24"
(2DB)
Widths: 12"- 36"
Heights: 281/2", 341/2"
(3DB, 3DB_BB, 3DB_WK, 4DB)
Widths: 12"- 36"
(4DBPD)
Width: 30"
Sink Base Cabinets
(SB)
(SBD_B)
(SB)
(SB)
(SB, SBD)
Widths: 18"- 24"
(SB_B, SBD_B)
Widths: 24"- 36"
(SB, SBD)
Widths: 30"- 36"
(SBA_B, SBA)
Widths: 30"- 42"
(DSB)
Width: 36" (back dimension)
(DSB_B)
Width: 42" (back dimension)
16
Base Cabinets
(SBD)
(SB, SBD)
Widths: 39"- 48"
(SB_F, SBD_F)
Widths: 48"
Corner Base Cabinets
(3DBSCB)
(DCB)
(ASSCB)
(SSCB)
(RCSB)
Width: 36"
(SCB, SSCB)
Widths: 33"- 36"
(ACB_L_R, ASSCB_L_R)
Widths: 33"-36"
(2DBSCB, 3DBSCB, 4DBSCB)
Widths: 36"- 39"
(FDSB, LDCB, DCB)
Width: 36"
Left and right back dimensions are unequal
Revolving Door
(DBFH)
Widths: 24"- 27"
(LSCB)
Widths: 33"- 36"
Available with revolving or hinged door
Base Appliance Cabinets
(DDCT_B)
(BDW)
Width: 27"
(DDCT_B, DDCT)
Widths: 27"- 36"
(RB_B)
Widths: 30"- 36"
(BWD, BWDC)
Widths: 24"- 36"
(BW_SD, BW_MD, BW_LD)
Widths: 24"- 36"
(BOC, BOCFTS)
Widths: 24"- 36"
Special Configuration Base Cabinets
(BZD)
(BAC)
Widths: 24"
(DBC)
Widths: 12"- 15"
(DBC_B)
Widths: 18"- 24"
(BTA)
Width: 12"
(BZD, BZFD)
Width: 12"
Specify angle left or right
(BFH_CIA)
Widths: 21"- 27"
(BFH_COA)
Widths: 6"- 12"
Base Cabinets
17
Oven Cabinets
Wakefield Rustic Cherry Ginger Snap Glazed Ebony
1
2
1. Pull-Out Storage Cabinet (UPS)
2. Built-In Appliance Cabinet, includes pull-out surface (OCK_B)
Design Note:
Choose from a variety of Oven and Appliance Cut-Out options to tailor to your
appliance and storage needs. Oven cabinets offer eye-catching design as well
as functionality.
Oven Cabinets • 84", 90", 93", 96" Heights
(OCA)
Widths: 24"- 33"
Depth: 24"
(OCB)
Widths: 24"- 33"
Depth: 24"
(OCC)
Widths: 24"- 33"
Depth: 24"
(OCD)
Widths: 24"- 33"
Depth: 24"
(OCE)
Widths: 24"- 33"
Depth: 24"
(OCF)
Widths: 24"- 33"
Depth: 24"
(OCG)
Widths: 24"- 33"
Depth: 24"
(OCH)
Widths: 24"- 33"
Depth: 24"
Height: 641⁄2"
(OCJ)
Widths: 24"- 33"
Depth: 24"
Height: 641⁄2"
(OCK)
Widths: 24"- 33"
Depth: 24"
Cut-Out Modification
(OCM, DOCM, TOCM)
See your design specialist for details.
A. Upper Door Storage Area
This area automatically adjusts (increases or decreases)
to correspond to your customized oven cut-out (area C).
A
B. Upper Rail
The upper rail height will fluctuate according to dimensions in area A and C.
B
C. Oven Cut-Out
Obtain a customized opening in 1/16" increments to fit
your appliance installation perfectly. Be sure to indicate
whether you need a single (OCM), double (DOCM), or
triple (TOCM) cut-out.
D. Lower Rail
The lower rail height will fluctuate in accordance with
the upper rail (B), the upper and lower rails will always
be the same measurement.
C
D
Oven Cabinets
19
Islands
Ellison Cherry Onyx
1
2
2
1
Island 1 - Back View
3
3
8
8
4
5
6
7
7
9
9
Island 2 - Front View
10
10
11
5
1
1
13
12
9
6
15
14
Island 1 - Front View
15
8
9
8
Island 2 - Back View
1. Decorative Turned Leg K (TRNLEGK)
5. Room Base Molding (RMHM8)
End and Extend Stile Down modifications
2. Profiled Solid Stock (PSSE; MW)
6.Trim Molding (TRM8)
(SB_B; BDFEL; EBS)
3. Wall Cabinet with Eclipse Mullion and
7. Colonial Feet (FTTRNC)
Whimsical Glass Insert, Finished Interior
8. Wainscot Peninsula Back Panel (PWCPNL)
with Glass Shelving, Wainscot Back,
9. Decorative Turned Leg M (TRNLEGM)
Deluxe Finished End, Depth, Width and
10. Base Full Height Door Cabinet with
Height modified (W_B; 2ICMUL; 2IDGT; FI;
IGS; WC; WDFEL; MD; MW; MH)
4. Panel with Edge Molding with size
modifications (PNLE_FLR; ECT1; MPNL)
The variety of cabinets and modification
options Medallion offers allows you to
create an island with a custom look. Add
Deluxe Finished End (BFH; BDFE)
11. 4 Drawer Pantry Base includes Bread
Box (4DBPD)
13. Deluxe Panels for Sub Zero Refrigeration
(SZ700BR)
14. Base Recycling Center with Deluxe Finished End and Extend Stile Down modifications (B4RC21; BDFER EBS)
15. Mission Arched Valance; Modifiy Width
(MAVAL; MW)
12. Sink Base Cabinet with Deluxe Finished
Design Note:
deocrative legs, glass inserts and a valance
and you've created a unique island piece to
complement your kitchen. The islands
shown here also take advantage of
Medallion's flexible standard modifications
ensuring each island is just right.
Island End Shelf Units with Decorative Legs
(BIEBB_1S)
(BIEWC_2S*)
Widths: 24"- 48"
Height: 341⁄2"
Depth: 18"
(BIE_2S*)
Widths: 24"- 48"
Height: 341⁄2"
Depth: 18"
(BIEBB_1S, BIEBBWC_1S)*
Widths: 24"- 48"
Height: 36"
Depth: 243⁄4"
*Decorative Leg Style D shown, see below for Decorative Leg style options.
Style D
Style F
Style G
(PBICBB_G1S)
Widths: 24"- 48"
Height: 351⁄2"- 361⁄2"
Depth: 243⁄4"
(PBIC_G1S)
Widths: 24"- 48"
Heights: 333⁄4"- 343⁄4"
Depth: 231⁄4"
Islands with Decorative Legs
(PBIE_1S)*
Widths: 24"- 48"
Height: 32"
Depth: 243⁄4"
(PBIEBB_1S)*
Widths: 24"- 48"
Height: 36"
Depth: 243⁄4"
*Decorative Leg Style D shown, see above for Decorative Leg style options.
22
Islands
(BIEWC_1S)
(BIE_1S, BIEWC_1S)*
Widths: 24"- 48"
Height: 32"
Depth: 24"
Component Drawer Units
(CD1D)
Widths: 15"- 24"
Height: 15"
Depth: 24"
(CDBD)
Widths: 15"- 18"
Height: 15"
Depth: 24"
(CD2D)
Widths: 12"- 24"
Height: 15"
Depth: 24"
Clear glass included, modification
available for decorative glass
Pedestal Ends
(BIEP_LEGD)
Depths: 23"- 26"
Height: 341⁄2"
4"x 4" square leg
(BIEP_LEGF)
Depths: 23"- 26"
Height: 341⁄2"
3"x 3" square leg
(BIEP_LEGG)
Depths: 23"- 26"
Height: 341⁄2"
3"x 3" square leg
(BIEP_LEGL)
Depths: 23", 26"
Height: 341⁄2"
4"x 4" square leg
(BIEPS_LEGF)
Depths: 23", 26", 38"
Height: 341⁄2"
3"x 3" square leg
(BIEPS_LEGG)
Depths: 23", 26"
Height: 341⁄2"
3"x 3" square leg
(BIEPS_LEGL)
Depths: 23"- 26", 38"
Height: 341⁄2"
4"x 4" square leg
Pedestal Ends with Stretcher
(BIEPS_LEGD)
Depths: 23", 26", 38"
Height: 341⁄2"
4"x 4" square leg
Component Islands
23
Component Islands
Potter’s Mill Maple Cashew
1
2
3
4
5
5
6
7
Island - Side View
8
9
Design Note:
4
5
10
5
Use components from Medallion's Island
Program to create a one of a kind island.
Component Drawers, Turned Legs and
Panels with Edge Molding come together
with a creative incorporation of wall
cabinets to create this custom island.
7
Island - End View (with cabinet)
1. Component Drawer; Modify Width and
4. Panel with Edge Molding; Bullnose
Height, Extended Stile; Face Frame &
Profile; Modify Size (PNLE_FB2E;
Height; Extended Stile; Face Frame and
Door Only (CD1D21; M2D; EBS; FFD)
ECBN2; MPNL)
Door Only (CD1D15; M2D; EBS; FFD)
2. Component Drawer; Modify Height and
Depth, Extended Stile; Face Frame & Door
Only (CD1D21; M2D; EBS; FFD)
3. Component Drawer; Modify width and
Depth, Extended Stile; Face Frame & Door
5. Turned Leg G (TRNLEGG1S)
6. Wall Cabinet; Modify Width and Height;
Extended Stile; Face Frame and Door only
(W; M2D; EWS; FFD)
7. Panel with Edge Molding; Bullnose
Profile; Modify Size (PNLE_FB2E; ECBN1;
MPNL)
Height, extend stile; Face Frame and Door
10. Wall Cabinet; Modify Width, Height and
Depth (24W_B; M3D; EWS_B)
Vanities
Piccadilly Maple White Icing
1
2
1
3
2
3
4
4
5
5
6
7
8
9
10
11
13
14
15
12
16
17
1. Pillowed Large Crown Molding (WCRNP)
9. Component Drawer; Modify Depth and
15. Vanity Sink Base; Modify Width and
2. Profiled Solid Stock C (PSSC)
Height; Face Frame and Drawer Only; Ex-
Height; Vanity Flush Toe Space;
3. Wisteria Frieze Molding (WISTR)
tended Base Stile (CD1D; M2D; FFD; EBS)
Extended Vainity Stile
4. Wall Fluted Filler; Modify Width
(WFF; MW)
5. Profiled Solid Stock F; Modify Width
(PSSF; MW)
6. Vanity Linen Cabinet with Hamper; Modify
Depth; Extended Utility Stile; Utility Flush
End; Utility Flush Toe Space
(21VLCDH; MD; EUS; UFEL; UFTS)
Height (CD1D; M2D)
Height; Face Frame and Drawer Only; Extended Base Stile (CD1D; M2D; FFD; EBS)
Width and Depth; Base Flush End
(BEPFF; M2D; BFER)
17. Classic Base Hutch Molding (CBHM)
(PNLE_F; PCPSSC)
13. Vanity Sink Base; Modify Width and
Height; Vanity Flush Toe Space; Extended
8. Base End Panel Fluted Filler; Modify
Vanity Stile (18FVSB_B; M2D; VFTS; EVS)
(BEPFF; M2D; BFER)
16. Base End Panel Fluted Filler; Modify
12. Panel with Edge Molding; Profile C
7. Profiled Solid Stock F (PSSF)
Width and Depth; Base Flush End
(18FVSB_B; M2D; VFTS; EVS)
14. Two Drawer Base; Modify Depth and
Height; Base Flush Toe Space
(2DB; M2D; BFTS)
Design Note:
Medallion's vanities offer stylish storage
options for the bathroom. A vanity double
sink base and linen cabinet come
together to create this look.
Vanity Base Cabinets • 18", 21" Depths • 32", 34½" Heights
(VB)
(VB_BS)
(VB, AHVB, VB_S*, AHVB_S*)
Widths: 12"- 24"
(VB_B, AHVB_B, VB_BS*, AHVB_BS*)
Widths: 24"- 30"
(VB, AHVB)
Width: 30"
(VDB, AHVDB)
Widths: 12"- 36"
(FHVB_TH, AHFHVB_TH)
Width: 21"
*SKUs (VB_S, AHVB_S, VB_BS, AHVB_BS) available with one slide-out shelf
Vanity Base, Angled, Diagonal and Mini Vanity Cabinets • 32", 34½" Heights
(HVB, AHHVB)
Widths: 15", 18"
Depth: 21"
(FHVB, AHFHVB)
Widths: 15", 18"
Depth: 21"
(DVB, AHDVB)
Width: 18"
(VAC, AHVAC)
Width: 21"
(16BVSB, AHVSB)*
Width: 18"
Depth: 16"
*Available with stainless steel tilt-out tray
Vanity Sink Base Cabinets • 18", 21" Depths • 32", 34½" Heights
(DVS)
(FVSB_B, AHFVSB_B)
Widths: 24"- 36"
(FVSB, AHFVSB)
Width: 42"
(VSB*, DVS, AHVSB*, AHDVS)
Widths: 18"- 24"
(DVS_B)
(DVS)
(VSB_B*, DVS_B, AHVSB_B*,
AHDVS_B)
Widths: 24"- 36"
Widths: 30"- 36"
(VWC)
Widths: 12", 15"
Heights: 24", 30", 36"
Depth: 4¾"
(MC)
Width: 15"
Height: 24"
Depth: 4¾"
Vanity Wall Cabinets & Mirrors
(DVS)
Widths: 42"- 48"
(TT_B)
Width: 24"
Height: 30"
Depth: 6"
(WTT_B)
Width: 24"
Height: 30"
Depth: 9"
(TVMC_T)
(TV)
Widths: 24", 30"
Height: 30"
Depth: 4¾"
28
Vanities
(TVMC_C, TVMC_T)
Widths: 24", 30", 36", 48"
Height: 34½"
Depth: 4¾"
Combination Vanity Sink Base Cabinets • 18", 21" Depths • 32", 34½" Heights
(VSDB*, AHVSDB_B*)
Widths: 24", 30"
(VSDB_*, AHVSDB_B*)
Widths: 36"
(FVSD*, AHFVSD*)
Widths: 24"- 30"
(FVSD_B, AHFVSD_B)
Widths: 36"- 42"
(VSDB, AHVSDB)*
Widths: 42", 54", 60"
(CVSB, AHCVSB)
Widths: 36", 42", 48"
(CVSB)B, AHCVSB_B)
Width: 36"
FVSD_B, AHFVSD_B)
Widths: 48", 54", 60"
(VSDB_B, AHVSDB_B)
Widths: 48", 54", 60"
(CVSB_B, AHCVSB_B)*
Width: 60"
(CVSB, AHCVSB)
Width: 60"
(DSVB_B, AHDSVB_B)
Width: 60"
*Specify location of drawer stack (left or right). SKUs (VSDB, AHVSDB) in widths of 54", 60" have two doors.
Some cabinets available with stainless steel tilt-out tray see your design specialist for details.
Vanity Linen Cabinets • 18", 21" Depths
(VLCD)
Widths: 18", 24"
Heights: 84", 90", 93", 96"
(VLCD_B)
Width: 24"
Heights: 84", 90", 93", 96"
(VLCDH)
Width: 18"
Heights: 84", 90", 93", 96"
21" depth only
Vanities
29
Other Room Cabinets
Trinity Quartersawn Oak Pinot Noir with Vineyard Wood Insert
1
2
3
4
5
5
6
4
7
8
8
1. Crescent Crown Molding
(CRESCRN)
6. Utility Full Height Door Cabinet; Toe
Space Removed; Modify Depth;
2. Arts & Crafts Stepped
Utility Flush Finished Ends; Trinity
Crown Molding (ACSTPCRN)
Mullion Grid; Wood Insert (UFH_B;
3. Utility Filler (UF)
TSR; MD; UFEB; IMTR_C;
4. Panel with Edge Molding; Concave
2IMWP_C)
Edge Profile; Modify Size
(PNLE_FLR; ECV2; MPNL)
5. Mission Arched Valance;
Finished All Sides (MAVAL*)
7. Arts & Crafts Stepped Cove Light
Valance (ACSTPLV)
8. Empire Square Column cut down
on site (WSQC)
* Item is a Custom Quote
Design Note:
Using Medallion's accessories in unique ways allowed our designer to
create this captivating piece. The Mission Arched Valance is used on the
sides of the cabinet to create the look of custom furniture.
Desk Cabinetry
(WDO, WDO_B)
Widths: 24"- 36"
Heights: 30", 36", 39", 42"
(DOU)
Widths: 24"- 36"
Height: 6"
Depth: 12"
(DDOB)
Widths: 12"- 24"
Height: 28½"
Depth: 18", 21", 24"
(DDOB_B)
Width: 24"
Height: 28½"
Depth: 18", 21", 24"
(DDRB)
Widths: 12"- 18"
Height: 28½"
Depth: 18", 21", 24"
(KHDD)
(KBD)
(DFDB)
Widths: 18"- 21"
Height: 28½"
Depths: 18", 21", 24"
(TDFB)
Widths: 18"- 24"
Height: 28½", 34½"
Depth: 18", 21", 24"
(DDCB)
Width: 24"
Height: 28½"
Depth: 24"
(DDCP)
Width: 24"
Height: 28½"
Depth: 24"
(KHDD, KBD)
Widths: 24"- 36"
Height: 5"
Depth: 18"- 24"
(UB)
Width: 18"
Heights: 84", 90", 93", 96"
(UW_B)
Widths: 24"- 36"
Heights: 84", 90", 93", 96"
(UW)
Width: 18"
Heights: 84", 90", 93", 96"
(UAC)
Width: 24"
Heights: 84", 90", 93", 96"
(DUC)
Widths: 18"- 24"
Heights: 84", 90", 93", 96"
(DUC)
Widths: 12"- 15"
Heights: 84", 90", 93", 96"
Tall Bookcase Cabinets • 12", 18" Depths
(US)
Widths: 18"- 36"
Heights: 84", 90", 93", 96"
(UB_B)
Widths: 24"- 36"
Heights: 84", 90", 93", 96"
Hutch & Corner Cabinets
(DCH_B)
Width: 24"
Height: 70½"
(KH)
Widths: 30"- 36"
Height: 48", 54", 57", 60"
Other Room Cabinets
31
Entertainment Cabinetry
(ENT)
Widths: 18", 21"
Height: 70½"
Depth: 24"
(ENT)
Widths: 33"- 48"
Height: 74"
Depth: 27"
(ENTDB)
Widths: 33"- 48"
Height: 74"
Depth: 24"
(ENTDB)
Widths: 18", 21"
Height: 70½"
Depth: 24"
(WENTDC)
Widths: 18", 21"
Height: 44"
Depth: 18"
Tall Cabinets • 12", 24" Depths
(UC)
(BFH_PD)
Widths: 30"- 42"
Height: 34½"
Depth: 24"
(W_PD)
Widths: 30"- 42"
Heights: 30", 36", 39", 42"
Depth: 24"
(DB)
Widths: 12"- 36"
Height: 18¼"
Depth: 21", 24"
(UC, UCS, UR)
Widths: 15"- 24"
Heights: 84", 90", 93", 96"
(UFH)
Widths: 12"- 24"
Height: 64½"
Tall Cabinets • 12", 24" Depths
(UC2DB)
(UC3DB)
(UC4DB_B)
(UR_B)
(UFH_B, UFH)
Widths: 24"- 36"
Height: 64½"
(UC2DB, UC2DB_B)*
Widths: 15"- 36"
Heights: 84", 90", 93", 96"
(UC3DB, UC3DB_B)*
Widths: 15"- 36"
Heights: 84", 90", 93", 96"
(UC4DB, UC4DB_B)*
Widths: 15"- 36"
Heights: 84", 90", 93", 96"
(UC_B, UCS_B, UR_B)*
Widths: 24"- 36"
Heights: 84", 90", 93", 96"
(SUR_B)*
Widths: 30"- 36"
Heights: 84", 90", 93", 96"
(PC)*
Widths: 18"
Heights: 84", 90", 93", 96"
(PC_B)*
Widths: 36"
Heights: 84", 90", 93", 96"
(UPS)*
Widths: 9"- 24"
Height: 64½"
(UPS)*
Widths: 9"- 24"
Height: 84", 90", 93", 96"
*Available in 24" depth only
32
Other Room Cabinets
Molding & Accessories
Knotty Alder Walnut Glazed Ebony
1
1
2
3
2
4
3
4
Molding Stack Profile
1. Deluxe Crown Molding
(DXCRN8)
2. Persia Specialty Molding (PERS8)
3. Profiled Solid Stock J (PSSJ)
4. Cabinet
Design Note:
Stack moldings to accentuate your cabinetry.
Select from various Crown Moldings, Decorative
Insert Moldings, Frieze and Specialty Moldings
as a finishing touch for your kitchen.
Crown Molding • 96" Lengths
(ACSTPCRN8)
(SMCRN8)
(CCM8)
(CLCM8)
(WCRN8P)
(WCVM8)
(SHKM8)
(MRQCRN8)
(CRESCRN8)
(STPCRN8)
(DXCRN8)
(RCRN8)
(CANE8)
Decorative Crown Molding • 96" Lengths
(CDCM8)
(DCM8P)
DCVM8)
Decorative Insert Molding • 96" Lengths
(RP8)
(EGD8)
(DXEGD8)
(AZTC8)
(BLFLW8)
(DECO8)
(DE8)
(BAMB4)
(LLAN8)
(AST8)
(PERG8)
(CAIR8)
(PALL8)
(PERS8)
(AOCMD8, AOCMD8L)
(BAT8)
(MLD8)
(COV8)
Frieze & Specialty Molding • 96" Lengths
(HAML8)
(WISTR8)
Trim Molding • 96" Lengths
(ACTRM8)
(CMD8, CMD8L)
(TRM8)
(SM8)
34
Under Cabinet Molding • 96" Lengths
(DLV8)
(RND8)
(DLV8P)
(ACCLV8)
(ACSTPLV8)
(ASTLV8)
(FBM8)
Edge Cap Molding • 96" Lengths
(ECMCV2)
(ECME1)
(ECME2)
(ECMBN1)
(ECMBN2)
(ECMT2)
(ECMWF1)
(ECMWF2)
(ECMB2)
(ECMAST2)
(ECMT1)
Base Hutch Molding • 96" Lengths
(BHM8)
(CBHM8)
(RBHM8)
(SBHM8)
(ACBHM8)
(ASTBHM8)
(CSBHM8)
Base Hutch Molding • 96" Lengths
(PSSA)
(PSSB)
(PSSC)
(PSSD)
(PSSE)
(PSSF)
(PSSG)
(PSSH)
(PSSJ)
(PSSK)
(PSSL)
(PSSM)
35
Bahamas Rustic Maple Harvest Bronze Glaze Burnished
and Oak Islander
Medallion Cabinetry
an
ELKAY
company
One Medallion Way
Waconia, MN 55387
www.medallioncabinetry.com
© 2009 MEDALLION CABINETRY | AN ELKAY COMPANY
ALL RIGHTS RESERVED. | MEDALLION MARKETING GROUP
0809

Drawer Guides-Door Closure Announcement - Kitchens

Transcription

Similar documents