Dekoron Manufacturing Capabilities Brochure

Dekoron Manufacturing Capabilities Brochure

**
Instrument
Pairs/triads
22-12 AWG
Bare and Plated Copper,
PVC
CPE
LSZH
PE
SWA, ILA, ILGS, DKB,
CCWA (Gardex), SS
1 to 100 Pairs
3.7" max diameter for
jacketing,
3.25" max dia for SWA,
1.75" max dia for ILGS &
.800" max dia for CCWA
FEP (200°C)
PFA (260°C)
FEP
PFA
SS
Contact us
PVC
PVC/Nylon
PVC
CPE
Only UL Type MC allows
ILA, ILGS and CCWA
XLPE
Silicone
LSZH
UL Type TC (Tray Cable)
UL Type MC (Metal Clad)
Same as instrumentation
ICEA S-73-532
cables (depending on gage) AS/NZS 5000.1 – 600/1000V
AS/NZS 5000.3 – 450V /750V
AS/NZS 3808
PVC
XLPE
PVC
ILA, ILGS
CSA CIC 600V
XLPE
PVC
N/A
TC-ER
UL 1309
IEEE 1583
XLPE or HDXLPE
PVC
CPE
TPN (LSZH)
ILGS, ILA, DKB, CCWA
20-10 AWG
Silicone Alloy
ThermoPlastic
Zero-Halogen
16-10 AWG, Copper & plated Cu
PVC
PVC/Nylon
Fluopolymers (FP)
* Armor designations
solid and stranded
Thermocouple
Type KX, JX, EX, TX, NX AND SX
20-16 AWG, solid and stranded
High Temperature
Copper or Thermocouple
conductors as indicated above.
Extension grade
Control
UL - multi-conductor
CSA - multi conductor
(Teck 90®)
20-6 AWG
14-10 AWG
UL 1309 Shipboard
Instrumentation, Type X AWG 22 - 10 (300V)
Cables, 300V or 600V
AWG 18 - 10 (600V)
Foundation FieldBus Cables
2-Way digital communication 16-18 AWG
cable
Circuit Integrity
Instrument and
Control Cable
Sensor Cables
UL - multi-conductor
(Power-Gen industry)
UL: 300V or 600V, PLTC/ITC,
ICEA S-73-532
C(UL) Type ACIC 600V
CSA CIC (600V)
ACIC
AS/NZS 5000.1 – 600/1000V
AS/NZS 5000.3 – 450V /750V
AS/NZS 3808
UL:PLTC
PVC
PVC/Nylon
XLPE (Cross-linked PE)
TPE (Thermoplastic Elastomer)
** Approval standards:
Not all approvals are available for all combinations
of insulation and armor types
Visit us at www.dekoroncable.com
Single and multi pair
Available upon
Request:
"-50°C Arctic Grade" jacket
-40°C UL approved cables
ITC-ER, PLTC-ER,
Direct Burial,
Low Smoke Zero Hal
TC-ER
MC-HL
FF-844 H1 and IEC 61158-2
ITC, PLTC
ITC-ER, PLTC-ER,
SWA, ILA, ILGS, DKB,
CCWA (Gardex), SS
UL PLTC/ITC
ICEA S-73-532
UL Type TC (Tray Cable)
IEC 60331
Cables pass IEC 60331
90 minutes 750°C and
Modified Hydro Carbon
Fuel test (1100°C for
20 minutes)
PVC
CPE
FP
SS
UL Type TC (Tray Cable)
ATEX and IECEx
Compliant, Gas-Block™
Cables
ILA
ILGS
SWA
DKB
CCWA
SS
Interlocked Aluminum
Interlocked Galvanized Steel
Served Wire Armor (Galvanized Steel)
Dekabon Chemical/Moisture Barrier (Zetabon)
Gardex ® Continuously Corrugated & Welded Al
Stainless Steel Overbraid
Shield Options
Ind and O/A, Al/Poly
taped shield.
Copper and bronze tapes,
Braided copper and
plated copper
Specialty and Composite Cable
We have the most reputed brand name for instrumentation cables. Dekoron Wire
and Cable pioneered the development of instrumentation cables for process
industry starting in the 1940’s. These cables monitor process parameters such as
pressure, flow speed, temperature and transmit low voltage signals to the
instrumentation and process control room.
Instrumentation Cables
Cable with power, data and tubing Custom Cable
components with served wire armor
Category Cable with
Gardex armor
Dekoron offers a wide range of specialty and composite cables that will suit your needs.
We can also provide a combination of data (Cat5 or Cat6) cables and fiber cables along
with instrumentation cables under one common armor.
Multi-pair instrumentation cable with
individual and overall shield
Multi-pair instrumentation cable with
served wire armor of galvanized steel
Field Bus Cables
Instrumentation cables come in multiple twisted pair configurations with each pair
gathering one set of process data. Our cables are used worldwide in petrochemical and refining industries, such as BP, Valero, Exxon, Aramco, ConocoPhillips and Star Petroleum. We have a large number of part numbers in stock, but
we can also build cables with any of your specific customizations.
Braided Stainless Steel
Fieldbus cable are all digital, two way,
multi-drop communication cables used
in field instruments and control systems.
Gardex® Cables
Visit us at www.dekoroncable.com
The Gardex armor meets the UL
MC-HL, Class I Division I criteria
and is widely popular in the US
for hazardous location applications. We have the ability to
apply this type of armor to a
variety of cables.
See CCWA armor in the data
tables.
Control Cables
Stainless Steel Over Braid
When regulatory requirements do
not mandate conventional metal
armor, braided stainless steel is a
less expensive option. Stainless
steel braid will provide excellent
abrasion resistance and flexibility.