docDOOR KNOB SETS - Whitechapel Ltd.
download 
Report Transcription
DOOR KNOB SETS - Whitechapel Ltd.
DOOR KNOB SETS PAGE 107 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 1 Polished brass Antiqued brass Polished chrome Satin nickel Code 1 2” Dia Polished brass Antiqued brass Polished chrome Satin nickel 108ARC7P 108ARC7A 108ARC7PC 108ARC7SN 107ARC1P 107ARC1A 107ARC1PC 107ARC1SN Code 1 Polished brass Antiqued brass Polished chrome Satin nickel Code 1 2 1/4” Dia Polished brass Antiqued brass Polished chrome Satin nickel 108ARC8P 108ARC8A 108ARC8PC 108ARC8SN 107ARC2P 107ARC2A 107ARC2PC 107ARC2SN PAGE 108 DOOR KNOB SETS Code 1 2 1/4” Dia Polished brass 108ARC4P Antiqued brass 108ARC4A Polished chrome 108ARC4PC Satin nickel 108ARC4SN Code 1 2” Dia Polished brass 108ARC3P Antiqued brass 108ARC3A Polished chrome 108ARC3PC Satin nickel 108ARC3SN PRODUCT SIZE All products are shown full size over a 1/4” grid. The door knob sets on this and the previous page are traditional English designs. The shapes and proportions are refined in a way quite unlike the amorphous styles we are used to in the US. Our knob sets are made in England of solid sand cast and forged brass. Each casting is trimmed, turned and refined by hand before an extensive polishing process. The human touch leaves a very subtle, but nevertheless satisfying surface modulation that the best machine made products cannot match. The choice between the larger 2 1/4” diameter knobs and the smaller 2” size should be decided on the basis of architectural scale and style. In use, both sizes will prove satisfactory though the larger diameter will add some mechanical advantage and so may be the better choice in a house with elderly or arthritic occupants. For maximum grip, the oval knobs are recommended, these will not slip in the hand and are particularly comfortable. The knob sets are supplied with an 8mm spindle that suits the latches we sell. We can provide either standard high grade American style tubular latches or typical English mortise latches. Most carpenters will prefer the tubular latches. In bathrooms and other situations where a locking function is required, we can supply matching thumbturn door bolts. We have found these a more reliable and attractive choice than an integral button on the knob set. These thumbturns are supplied either with or without an outside safety release. Our knob sets are supplied with roses of a size that matches the knob. These will not work on pre-drilled doors. The standard 2 1/8” cross bore is too big and if it doesnt swallow the rose whole, it certainly leaves no wood to fasten to. Code 1 Polished brass Antiqued brass Polished chrome Satin nickel Polished bronze 108ARC9P 108ARC9A 108ARC9PC 108ARC9SN 108ARC9BR PAGE 109 RIM HARDWARE KNOB SETS Code 1 Polished brass Code 1 Polished brass 109ARC8RL 109ARC1RL Code 1 Polished brass 109ARC7RL Code 1 Polished brass These knobs are examples of the interior portion of our rim hardware knob sets. The rose on the exterior portion is larger and an example can be seen on 107ARC2 (bottom right of page 107). These sets are available only in polished brass. The sets are matches for the rim lock on page 165 and 166. PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. 109ARC2RL DOOR SETS PAGE 110 Code 4 Antiqued brass 110KBR1 Code 4 Antiqued brass 110KBR2 These completely authentic English antique reproductions are unique and perfectly usable with modern or traditional latches. Like all of our Code 4 items, the parts are lost wax cast directly from originals. We can supply either modern or traditional latches to suit. They are supplied with a 7mm spindle. Code 1 Polished brass Antiqued brass Polished chrome Satin nickel 110ADC3P 110ADC3A 110ADC3PC 110ADC3SN This English brass lever set is graceful and comfortable. The lever is mounted to the rose and internally sprung to assure years of sag and rattle free use. The 2 1/2” diameter rose allows their use on pre-drilled doors with the common 2 1/8” cross-bore. The internal springing eliminates the need for a heavily spring latch so these levers should be partnered with sprung for knobs. This lever is supplied with a 8mm spindle that suits the latches we sell. DOOR SETS PAGE 111 The levers on this page are a new range made in the US by the manufacturer of our cabinet and architectural hinges. The same unmatched standard of design, machining and finishing that makes our hinges the best available also applies to these door fittings. Each design achieves an uncommon balance between comfort, utility and elegance. Every effort has been made to ensure ease of installation and long reliable service. We stock these items in the finishes indicated, but can special order any number of less common finishes like the silver plate shown on the next page. These levers are supplied with a 7mm spindle. Please anticipate an 8 week lead time for anything more than small quantities of these items. PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 11 Polished brass Antiqued brass Polished chrome Satin nickel 111ML10P 111ML10A 111ML10PC 111ML10SN Code 11 Polished brass Antiqued brass Polished chrome Satin nickel 111ML11P 111ML11A 111ML11PC 111ML11SN PAGE 113 DOOR SETS These door knobs are wrought brass and intended to partner the plates on the next page. They can be used with the latch shown on this page or any other tubular latch with a 9/32” hub. The pattern is authentic Americana and has a reliable functionality that is hard to improve upon. Unlike the vast bulk of old American designs, this one is still made in the US rather than in China. We can supply the latches in passage or privacy function. PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 11 2 1/4” Dia Polished brass 113ML31P Antiqued brass 113ML31A Polished chrome 113ML31PC Satin nickel 113ML31SN Code 11 Passage function Polished brass 113MT1P Antiqued brass 113MT1A Polished chrome 113MT1PC Satin nickel 113MT1SN Privacy function Polished brass 113MP1P Antiqued brass 113MP1A Polished chrome 113MP1PC Satin nickel 113MP1SN PAGE 114 DOOR PLATES AND ROSES These plates and roses are sold per pair and match the knobs and latches on page 113. Please anticipate a 6 week lead time for any more than a small order. Code 11 2 1/4” Dia Polished brass Antiqued brass Polished chrome Satin nickel Code 11 Size: 2 1/4” x 7” Passage function Polished brass 11MS1P Antiqued brass 11MS1A Polished chrome 11MS1PC Satin nickel 11MS1SN Privacy function Polished brass 11MS1PRP Antiqued brass 11MS1PRA Polished chrome 11MS1PRPC Satin nickel 11MS1PRSN PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 11 Size: 2 3/4” x 10” Passage function 114MS2P Polished brass 114MS2A Antiqued brass 114MS2PC Polished chrome 114MS2SN Satin nickel Privacy function Polished brass 114MS2PRP Antiqued brass 114MS2PRA Polished chrome 114MS2PRPC Satin nickel 114MS2PRSN 114MS3P 114MS3A 114MS3PC 114MS3SN Code 11 2 1/4” Dia Polished brass Antiqued brass Polished chrome Satin nickel 114MS3P 114MS3A 114MS3PC 114MS3SN IRON AND PORCLAIN DOOR SETS PAGE 115 These four French made door sets are provided with 7mm spindles and 8mm adapter sleeves for compatibility with our latches. The knobs rotate on integral roses for smooth, rattle free use, while the spindle is free floating. The pair of crossbolts supplied can clamp the roses across most of the door thickness. The porcelain knobs are from Limoges. These designs and finishes match cabinet hardware offered throughout the catalog. Code 26 Rusted iron White porcelain 115REH3 Code 26 Rusted iron 115REH2 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 26 Rusted iron White porcelain 115REH4 Code 26 Rusted iron 115REH1 PAGE 116 Code 7 Black iron 116REK5 IRON DOOR KNOB SETS Code 7 Black iron 116REK7 Code 7 Black iron 116REK6 Code 7 Black iron 116REK8 Our iron door knob sets are sand cast then hand finished and heat treated with a final application of beeswax for protection. These sets look centuries old when new and will only become more beautiful with time and use. As with our other knob sets, these are sold as a pair to suit a single door. We can supply either American specification tubular latches of 2 3/8” or 2 3/4” backset, or the traditional English types with more backset options. The knobs on this page are mounted to (and free to rotate on) their roses, they are linked with a floating 8mm spindle that is cut to PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 7 Black iron 116REK9 length to suit the door thickness. This type of mounting results in a smooth rattle free installation. Because the roses are screw-mounted and scaled to suit the knobs, none of these sets will work directly on pre-drilled doors with a 2 1/8” cross-bore. The roses on some of these sets may at least cover the bore, but to use these on pre drilled would require plugging the cross-bore. If a privacy function is required, we recommend a separate iron door bolt or hook and eye, both of which can be found elsewhere in the catalog. IRON DOOR KNOB SETS PAGE 117 These English iron door sets are provided with 8mm spindles for compatibility with our latches. The knobs are separate from their roses and are an economical and easy to install alternative to those on page 116. As with those knobs, these cannot be installed on pre-drilled doors without first plugging the 2 1/8” cross-bore. All our knob sets are sold as a pair to suit a single door. Code 7 Black iron 117REK1 Code 7 Black iron 117REK3 Code 7 Black iron 117REK2 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. PAGE 118 Code 7 Black iron 118REL15 IRON DOOR LEVER SETS PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 7 Black iron 118REL16 Code 7 Black iron 118REL17 Our iron door lever sets are sand cast then hand finished and heat treated with a final application of beeswax for protection. These sets look centuries old when new and will only become more beautiful with time and use. As with out other door sets, these are sold as a pair to suit a single door. We can supply either American specification tubular latches of a 2 3/8” or 2 3/4” backset or the traditional English types with more backset options. The levers on this page and page 119 are mounted on their roses and are sprung, which means they will never sag. They are linked with a floating 8mm spindle that is cut to length to suit the door thickness. As they are self sprung, you should partner them with knob strength latches. Because the roses are screw mounted and scaled to suit to suit the levers, none of these sets will work directly on pre-drilled doors with a 2 1/8” cross-bore. The roses on some of these sets may at least cover, but to use these on pre-drilled doors would require first plugging the cross-bore. If a privacy function is required, we recommend a separate iron door bolt or hook and eye, both of which can be found elsewhere in this catalog. IRON DOOR LEVER AND RING SETS PAGE 119 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 7 Black iron 119REK4 Code 7 Black iron 119REK10 Code 7 Black iron 119REL18 These English iron door sets are provided with 8mm spindles for compatibility with our latches. The rings and lever are mounted to their roses (see page 116 for more information), and the lever is self-sprung. All our door sets are sold as a pair to suit a single door. IRON DOOR LEVER SETS PAGE 120 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 13 Patinated iron 120LHF2 Code 13 Patinated iron 120LHF4 Our French iron levers are unmatched for authentic character. These hand made items are fully functional and comfortable in use. They can be paired with the escutcheon plates on the following two pages. As with all our architectural door sets, these levers are supplied as a door pair with a suitable 8mm spindle. Because some of these levers are quite heavy and not sprung, we recommend our heavy duty English mortise latches for sag-free use. To further enhance their authentic flavor, these levers can be partnered with the iron-rim locks shown on page 167. These excellent quality locksets have a smooth solid action and are highly recommended for interior applications. For entry application, we can supply escutcheons cut for skeleton key to suit our English mortise entry locksets or with Eurocylinder cutout for modern keyed security. Code 13 Patinated iron with Brass pommel 120LHF1 Code 13 Patinated iron 120LHF3 LEVER ESCUTCHEONS Code 13 Patinated iron RH Passage 121LHE1R Skeleton key 121LHE1RK Euro 51mm 121LHE1REU LH (Shown) Passage 121LHE1R Skeleton key 121LHE1RK Euro 51mm 121LHE1REU PAGE 121 Code 13 Patinated iron Passage 121LHE2 Skeleton key 121LHE2K Euro 51mm 121LHE2EU Code 13 Patinated iron Passage 121LHE3 Skeleton key 121LHE2K Euro 51mm 121LHE2EU These Escutcheon plates can be partnered with the levers on page 120. They are available in three functions. Passage function has no keyhole, Skeleton key function suits our iron rim lock and English skeleton keyed mortise lockset and Euro 51mm suits our English Eurocylinder mortise lockset. LEVER ESCUTCHEONS PAGE 122 These escutcheons can be partnered with the levers on page 120. Please note that these escutcheons are sold individually. Code 13 Patinated iron 122LHE5 Code 13 Patinated iron 122LHE9 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 13 Patinated iron 122LHE7 Code 13 Patinated iron 122LHE6 Code 13 Patinated iron 122LHE8 IRON DOOR LEVERS PAGE 123 Code 26 Rusted iron Round rose 123VM4R Petal rose 123VM4P Code 26 Rusted iron Round rose 123VM3R Petal rose 123VM3P Code 26 Rusted iron Round rose 123VM5R Petal rose 123VM5P PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. These door levers are provided with 8mm spindles for compatibility with our European and domestic latches. They are unspring, so need to be partnered with lever strength latches. All our door sets are sold as a pair to suit a single door. BRASS RING HANDLES PAGE 124 Though these flush handles were designed for the doors of squash courts, they might just as well be used anywhere an uninterrupted surface is desired. These are sold individually and come supplied with an 8mm spindle to suit our American or English door latches. The opposing side of the same door can be fitted with either a regular knob from the preceding pages or another ring from this page. PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 1 Polished brass Antiqued brass 124ADC1P 124ADC1A Code 1 Polished brass For mortise latch For rim latch Code 1 Polished brass Antiqued brass 124ADC2P 124ADC2A This flush ring handle is easier to grasp than the one above, and while it may not be as practical inside a squash court, will probably be more useful elsewhere. Like that item, it is sold individually and comes with an 8mm spindle. 124ADC3 124ADC4 These 18th century style ring handles are quite functional and will lend a period flavor to any interior. These are sold as door sets either for use with a conventional mortise latch or to suit one of our brass rim locks, in which case the large rose shown here is paired with a much smaller one that bears against the lockset. PAGE 126 IRON THUMBLATCH SET Handle only, without finger pull extension. For locksets on page 125. Code 6 Black iron 126RP65 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Complete traditional thumblatch set comprising all parts shown (see page 128 for details) Code 6 Black iron 126RP66 IRON THUMBLATCH SET PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Complete traditional thumblatch set comprising all parts shown (see page 128 for details). Code 6 Black iron Bean style (main image) 127RP62 Spade style (detail shown at left at reduced scale) 127RP64 PAGE 127 PAGE 128 IRON THUMBLATCH SET PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Complete traditional thumblatch set comprising all parts shown Code 7 Black iron 128RE34 Full Traditional Thumblatch Set Our traditional thumblatch sets have centuries of history to recommend their use even on new construction. A couple of considerations will need to be taken into account before committing yourself to this style of door hardware. First: For the latch to function, the door must be set flush with the surrounding trimwork, at least to the extent that will allow the strike and arm clearance to operate. Second: The handle always mounted to the outside of an in-swinging door. This means the occupants of a room will see the sketched view on the right, while those entering will see the handle. PAGE 132 SCREEN DOOR LATCH SETS Our American screen door latches are the finest available. Being built entirely of brass, they will withstand corrosive atmospheric conditions far longer than other brands that commonly use zinc and steel parts. The rim latch above is surface mounted to the inside of the door, while the latch below is fully mortised. Both latches are supplied with a low profile lever for the inside and a knob for the outside. PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 11 Polished brass 132SDL2P Antiqued brass 132SDL2A Polished chrome 132SDL2PC Polished nickel 132SDL2PN Satin nickel 132SDL2SN Code 11 Polished brass 132SDL1P Antiqued brass 132SDL1A Polished chrome 132SDL1PC Polished nickel 132SDL1PN Satin nickel 132SDL1SN SCREEN DOOR LATCH PRODUCT SIZE All products are shown full size over a 1/4” grid. PAGE 133 Code 11 Polished brass 133SDL4P Antiqued brass 133SDL4A Polished chrome 133SDL4PC Polished nickel 133SDL4PN Satin nickel 133SDL4SN PAGE 134 IRON DOOR LATCHES PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 7 Black iron 134GT3 The above latch will work for both left and right handle applications. Included is a 119REK10 (page 119) handle and 8mm spindle for the opposing side of the door if that function is required. Code 7 Black iron Right hand 134GT1R Left hand (shown) 134GT1L This latch set is supplied with a 119REK4 (page 119) handle and spindle for the opposing side of the door if that function is required. IRON DOOR LATCHES PAGE 135 Code 7 Black iron 135CL4 When swung into the active position, the below catch will allow a door to open a few inches, but no further. Set in the inactive position, it will not interfere in any way with normal opening and closing. Code 7 Black iron 135CL3 The latch below is designed for use on the outswinging door of a closet or pantry. Because it is functionally similar to our thumblatches, the diagram and explanation on page 128 can be used as a reference. The pin projecting from the backside of the arm allows the catch to be released from inside. Theis pin may be cut off if the latch will not be used in a walk-in application. PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 6 Black iron 135RTL1 PAGE 136 IRON SHUTTER FASTENERS Code 26 Rusted iron 136SD2 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 7 Black iron Right hand 136SD3R Left hand (shown) 136SD3L These shutter fasteners are mounted to a 4” long spike that can be driven into wood or set in masonry. IRON CASEMENT FASTENERS PAGE 137 Code 7 Black iron With mortise plate 137CWL12M With hook plate 137CWL12H Code 7 Black iron With mortise plate 137CWL13M With hook plate 137CWL13H Code 7 Black iron With mortise plate 137CWL10M With hook plate 137CWL10H PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. PAGE 138 CASEMENT FASTENERS The traditional English casement catches on this page can be used on either left or right swinging windows. The scale of the handles provides a comfortable hand hold for pulling a window closed. The choice of mortis or hook strike will depend on how your window is framed and if single or paired. PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 1 With mortise plate Polished brass 138CWL3P Antiqued brass 138CWL3A With hook plate Polished brass 138CWL4P Antiqued brass 138CWL4A Code 7 Black iron With mortise plate 138CWL1M With hook plate 138CWL1H Code 7 Black iron With mortise plate 138CWL5M With hook plate 138CWL5H CASEMENT AND CUPBOARD CATCHES Code 1 Polished brass 139C10P Antiqued brass 139C10A Polished chrome 139C10PC Satin nickel 139C10SN Code 1 Polished brass 139C120P Antiqued brass 139C120A Polished chrome 139C120PC Satin nickel 139C120SN Code 1 Polished brass 139C110P Polished chrome 139C110PC PAGE 139 Code 1 Polished brass 139C130P Antiqued brass 139C130A Polished chrome 139C130PC Satin nickel 139C130SN Code 1 Polished brass 139C140P Polished chrome 139C140PC Code 7 Black iron 139C150 PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 16 Polished brass 139C213P US10B (dark) 139C213A Polished chrome 139C213PC Satin nickel 139C213SN Code 16 Polished brass 139C214P US10B (dark) 139C214A Polished chrome 139C214PC Satin nickel 139C214SN PAGE 140 CASEMENT CATCHES Code 1 Polished brass Antiqued brass Code 1 Black iron 140C112 140C217P 140C217A PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 1 Polished brass Antiqued brass 140C218P 140C218A Code 1 Polished brass Antiqued brass 140C219P 140C219A CUPBOARD CATCHES PAGE 141 PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 11 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel Code 11 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel 141CL20P 141CL20A 141CL20PC 141CL20PN 141CL20SN Code 11 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel 141CM3P 141CM3A 141CM3PC 141CM3PN 141CM3SN Code 11 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel 141C20P 141C20A 141C20PC 141C20PN 141C20SN 141CM4P 141CM4A 141CM4PC 141CM4PN 141CM4SN Code 11 Left hand (shown) Polished brass 141C30LP Antiqued brass 141C30LA Polished chrome 141C30LPC Polished nickel 141C30LPN Satin nickel 141C30LSN Right hand Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel 141C30RP 141C30RA 141C30RPC 141C30RPN 141C30RSN PAGE 142 CUPBOARD TURNBUTTONS Code 1 Polished brass 142CT31 Code 1 Polished brass 142CT32 Code 1 Polished brass 142CT34 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 11 Burnished brass With backplate 142CT22 Without backplate 142C22 Code 11 Burnished brass With backplate 142CT23 Without backplate 142C23 Code 11 Burnished brass With backplate 142CT24 Without bac 142C24 Code 11 Burnished brass Without backplate 142C25 CUPBOARD TURNS PAGE 143 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 4 Antiqued brass 143KBY45 Code 1 Polished brass 143CT43 Code 31 Polished brass 143HT3P Antiqued brass 143HT3A Code 1 Polished brass 143CT46 Code 31 Polished brass 143HT5P Antiqued brass 143HT5A Code 1 Polished brass 143CT44 Code 31 Polished brass 143HT7P Antiqued brass 143HT7A Code 7 Black iron 143RT4 PAGE 144 CUPBOARD TURNS PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 31 Birch 144KW82 Code 1 Polished brass 144DK4P Antiqued brass 144DK4A Code 1 Polished brass 144KT3P Antiqued brass 144KT3A Code 1 Polished brass 144KT2P Antiqued brass 144KT2A Code 1 Polished brass 144KT1P Antiqued brass 144KT1A BALL CATCHES Double ball catches are easy to install if you still have access to the inside of the cabinet. If you are planning to use the catches on anything but the most rigid cabinetwork, it is advisable to mount them horizontally at the bottom or top of the door. If mounted vertically and opposite the hinge edge of the door, any small amount of racking will change the vertical relationship between the parts and prevent the catch from functioning correctly. Plan to fit the catches before the cabinet back goes on. Mounting these catches on finished cabinetwork can be frustrating unless you are blessed with an extremely small assistant with a flashlight. Without help of this sort, you will have to rely purely on measurement. Even with the most painstaking measurements, it is difficult to get it right the first time, though a little filing of the male component is usually all it takes. Because of the finicky nature of these catches, they are better suited to fine furniture than built in cabinetwork. The spring pressure and feel of double ball catches can be adjusted by means of a screw at the end of each barrel. PAGE 145 Single ball catches can be used with the supplied strike or without. In softer woods, it may be advisable to use the strike. As a general principal, always use the largest catch your material can accommodate, the larger the catch, the better the feel and sound. A ball catch can be fitted in a variety of locations around a door without much trouble. Generally they will be positioned in the bottom of the door as far away from the hinge as possible. On tall doors it might be a good idea to use a catch top and bottom. A countersink bit makes an ideal indent for the ball. This indent can be accurately located if a sheet of carbon paper is laid down on the wood and the door is closed car fully. The end of the resulting black line will mark the center of your countersink. Drill a very shallow countersink to check for correct positioning. As you drill it deeper, you can move its center a little if some adjustment is required. Code 2 Body dia: 1/4” Brass 145C3 Code 2 Body dia: 5/16” Brass 145C2 These two ball catches are screw adjustable for spring tension and projection. Code 2 Body dia: 3/8” Brass 145C4 Code 16 Polished brass US10B (dark) Polished chrome Satin nickel 145CV2P 145CV2A 145CV2PC 145CV2SN Code 17 Brass 145CD1 Chrome 145CD1C Code 17 Brass 145CD2 Chrome 145CD2C Code 16 Polished brass US10B (dark) Polished chrome Satin nickel 145CV3P 145CV3A 145CV3PC 145CV3SN Code 2 Body dia: 1/2” Brass 145C5 The three catches to the right are American made by Brusso and Emphasize sophisticated finish and function. The four flanged ball catches above right are English. The three catches to the left are American made and finely finished. The two shown below are English and are of a more functional than pretty nature. Code 17 Brass 145CD3 Chrome 145CD3C Code 14 Brass Body dia: 7/16” 145CA1 Body dia: 11/32” 145CA2 Body dia: 1/4” 145CA3 Code 2 Brass 145CD4 Code 2 Brass 145CD5 PAGE 146 ASSORTED CATCHES AND HASPS Secretaire catches were designed to secure the fall front writing surface of period secretaire desks in the closed position. Because of their strength and neat detailing, they turn up in any number of situations where a quick release catch is needed. Code 1 Polished brass 146C61P Antiqued brass 146C61A Code 1 Polished brass 146FRC1P PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. This push button latch is adjustable to suit door thicknesses between 1/2” and 7/8” Code 11 Polished brass 146CG3P Code 11 Polished brass 146CL22P Satin nickel 146CL22SN Polished chrome 146CL22PC Code 1 Polished brass 146BH9P Antiqued brass 146BH9A These two hasp and staples use a turn stale to secure the hasp in the closed position. The larger item is also drilled to accept a padlock. In both cases, the hasp may be installed as illustrated, or reversed with the upper leaf mounted inaccesibly to the underside of the lid for greater security. Code 10 Polished brass 146BH10P HASP AND STAPLES PAGE 147 All the staples on this page are drilled to accept the shackle of any normal padlock. Code 1 Polished brass 147BH6P Antiqued brass 147BH6A Code 11 Polished brass 147BH8 Code 11 Polished brass 147BH7 Code 1 Polished brass 147BH5P Antiqued brass 147BH5A PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 7 Black iron 147RHS1 Code 7 Black iron 147AVRY1 TABLE CATCHES PAGE 148 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 1 Polished brass 148C202P Antiqued brass 148C202A Code 1 Polished brass 148C6P Antiqued brass 148C6A Table turn catch Banjo catch Code 1 Polished brass 148C201P Antiqued brass 148C201A Code 1 Burnished brass 148C7 Table catches can serve a variety of purposes all related to registering table leaves in place. Different tables have quite different requirements and the correct catch should be used in each case. Dining tables of the 18th century were very often an assemblage of independent units that could be pushed together in different combinations to form a single table of suitable size for every occasion. In order to keep these elements from shifting side to side or up and down, each top would key into the next with splines or pins. Table clips were used to keep the tables from coming apart. These clips are installed as pairs at each joint. They are fitted near the table edge for easy Code 1 Burnished brass 148CS7 access and a little visual interest. More modern extension tables built on telescoping table slides need a catch to prevent the leaves from creeping apart. Turn catches keep the leaves together and are easy to use. If crawling on the floor is not acceptable, then a pair of catches should be used at each joint. These can then be set accessibly near the table edge. Tilt-top tables have their own catches, either round or banjo shaped spring loaded devices that release to allow the table surface to tilt through 90 degrees for storage against a wall. These catches are mounted to the underside of the table surface and engage the strike which is mortised into the table pedestal. TABLE FORKS AND CLIPS All our table catches, clips and forks are sold individually. Code 1 Center to center: 3 1/8” Polished brass 149CG9P Antiqued brass 149CG9A Code 4 Antiqued brass 149TBY1 Code 1 Center to center: 2 5/8” Polished brass 149CL8P Antiqued brass149CL8A Code 1 Center to center: 2 1/8” Polished brass 149C8P Antiqued brass149C8A Table fork Code 1 Polished brass 149CT8P Antiqued brass149CT8A PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. PAGE 149 PAGE 150 SASH, TABLE AND MIRROR SCREWS Code 2 Brass with steel thread Bolt dia: 1/4” Bolt length: 2 1/2” 150KT21 3” 150KT22 4” 150KT24 Code 2 Brass with steel thread Bolt dia: 5/16” The sash screw was conceived as a security Bolt length: device for double hung windows. A hole is 2 1/2” 150KT15 drilled through one frame and into the other. 3” 150KT16 The flanged nut is set into the second frame 3 1/2” 150KT17 so when the screw is inserted and tightened, the two frames are locked together. These screws can be used in many applications where individual sections need to be assembled securely and disassembled easily. Code 1 Brass with steel thread Polished brass 150KM1P Antiqued brass150KM1A Code 2 Brass with steel thread Bolt dia: 5/16” Bolt length: 2 1/2” 150KT10 3” 150KT11 3 1/2” 150KT12 4” 150KT13 Mirror screws allow a mirror frame to swivel easily between its supports, and then be locked firmly at the desired angle. Code 2 Brass with steel thread Bolt dia: 3/8” Bolt length: 2 1/2” 150KT5 3” 150KT6 3 1/2” 150KT7 4” 150KT8 PRODUCT SIZE All products are shown full size over a 1/4” grid. PRIVACY BOLTS This surface mounted indicator bolt set combines a positive locking function with an outside safety release. The indicator disc can be set to show either the words “engaged” and “vacant” or the colors red and green. Code 1 Backset: 1 1/4” Polished brass 151PVC2P Antiqued brass 151PVC2A Polished chrome 151PVC2PC Code 7 Backset: 2 3/8” Black iron 151REP1 Code 1 Polished brass 151PVC1P Antiqued brass 151PVC1A Polished chrome 151PVC1PC PRODUCT SIZE All products are shown full size over a 1/4” grid. These mortise privacy bolt allows the option of emergency external release. The finish and style match our door knob sets for an elegant and functional solution to the privacy requirement of bedrooms and bathrooms. Code 7 Backset: 2 3/4” Black iron 151REP2 PAGE 151 Code 1 Backset: 1 3/4” Polished brass 151PVC3P Antiqued brass 151PVC3A Polished chrome 151PVC3PC Polished chrome 151PVC3PN Code 1 Backset: 2 1/4” Polished brass 151PVC4P Antiqued brass 151PVC4A Polished chrome 151PVC4PC Polished chrome 151PVC4PN PAGE 152 PRODUCT SIZE All products are shown full size over a 1/4” grid. BRASS SURFACE BOLTS Code 1 Polished brass 152AB6P Antiqued brass 152AB6A This sprung chain bolt has a bevel ended bolt and so will self-latch. Code 1 Polished brass 152AB7P Antiqued brass 152AB7A A spring indent keeps this foot bolt in the withdrawn position until fully engaged. BRASS SURFACE BOLTS PAGE 153 Code 1 Polished brass 153CV1P Antiqued brass 153CV1A This bolt is supplied with both the strike shown and a mortise strike. Both the strikes shown are included. Code 16 Polished brass 153CN4P US10B (dark) 153CN4A Polished chrome 153CN4PC This cranked bolt has a 3/8” offset. Code 1 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel 153CV2P 153CV2A 153CV2PC 153CV2PN 153CV2SN Code 1 Polished brass 153C101P Antiqued brass 153C101A Code 1 Polished brass 153C1P Antiqued brass 153C1A Code 2 Polished brass 153C19 These low profile surface bolts are less than 3/16” thick excluding the knob. Both the strikes shown are included. Code 2 Polished brass 153C18 Code 1 Polished brass Bolt length: 2” 153C14P 3” 153C15P 4” 153C16P 6” 153C17P Antiqued brass Bolt length: 2” 153C14A 3” 153C15A 4” 153C16A 6” 153C17A PAGE 154 BRASS FLUSH BOLTS Code 1 Size: 8” x 3/4” x 1 1/2” Polished brass 154C131P Antiqued brass 154C131A Size: 10” x 3/4” x 1 1/2” Polished brass 154C132P Antiqued brass 154C132A Size: 12” x 3/4” x 1 1/2” Polished brass 154C133P Antiqued brass 154C133A Size: 18” x 3/4” x 1 1/2” Polished brass 154C134P Antiqued brass 154C134A PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 1 For wood floors Polished brass 154CDS1P Antiqued brass 154CDS1A Polished chrome 154CDS1PC Satin nickel 154CDS1SN Code 1 Size: 3” x 1/2” x 3/4” Polished brass 154C11P Antiqued brass 154C11A Polished chrome 154C11PC Satin nickel 154C11SN Code 1 Size: 4” x 5/8” x 7/8” Polished brass 154C12P Antiqued brass 154C12A Polished chrome 154C12PC Satin nickel 154C12SN Code 1 Size: 6” x 3/4” x 1 1/4” Polished brass 154C13P Antiqued brass 154C13A Polished chrome 154C13PC Satin nickel 154C13SN Code 1 For stone or tile floors Polished brass 154CDS2P Antiqued brass 154CDS2A Polished chrome 154CDS2PC Satin nickel 154CDS2SN CREMONE BOLTS Our English solid brass cremone bolts offer a wide range of stock and custom options. We stock them to suit an 84” opening with the knob or lever height at 42”. The bars can easily be cut shorter and we can supply longer bars by request. Our cremones mount and operate on the interior side of the door. All styles can be ordered with the additional parts needed to allow for exterior entry. All necessary guides and strikes are supplied for both in-swinging and outswinging doors. The usual plated finishes are available by special order. Solid unlacquered polished bronze can be supplied where noted at about double the cost of polished brass. Code 1 One side function Polished brass 155CBS1P Antiqued brass 155CBS1A Both side function (example below) Polished brass 155CBD1P Antiqued brass 155CBD1A PAGE 155 Code 1 With lever (shown) One side function Polished brass RH 155CBS3RP LH 155CBS3LP Antiqued brass RH 155CBS3RA LH 155CBS3LA Both side function Polished brass RH 155CBD3RP LH 155CBD3LP Antiqued brass RH 155CBD3RA LH 155CBD3LA Code 1 With oval knob One side function Polished brass RH 155CBS5RP LH 155CBS5LP Antiqued brass RH 155CBS5RA LH 155CBS5LA Both side function Polished brass RH 155CBD5RP LH 155CBD5LP Antiqued brass RH 155CBD5RA LH 155CBD5LA This item is available in solid unlacquered polished bronze by special order PRODUCT SIZE All products are shown full size over a 1/4” grid. PAGE 156 Code 1 One side function Polished brass 156CBS2P Antiqued brass 156CBS2A Both side function Polished brass 156CBD2P Antiqued brass 156CBD2A CREMONE BOLTS Code 1 With lever (shown on page 155) One side function Polished brass 156CBS4P Antiqued brass 156CBS4A Both side function Polished brass 156CBD4P Antiqued brass 156CBD4A Code 1 With oval knob One side function Polished brass 156CBS6P Antiqued brass 156CBS6A Both side function Polished brass 156CBD6P Antiqued brass 156CBD6A This item available in solid unlacquered polished bronze by special order PRODUCT SIZE All products are shown full size over a 1/4” grid. DOOR BOLTS Code 7 Black iron 157RE23 Bolt length: 21” Code 26 Rusted iron 157BSH3 Bolt length: 20” PAGE 157 PRODUCT SIZE All product shown over a 1/4” grid, details on the sides shown full size. PAGE 158 DOOR AND CUPBOARD BOLTS PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 26 Rusted iron 158BSH5 Code 26 Rusted iron 158BSH4 Code 7 Black iron 158RE21 Code 7 Black iron 158RE20 DOOR AND CUPBOARD BOLTS PAGE 159 Code 26 Length: 16” (shown shortened to fit page) Rusted iron 159BV3 Code 26 Rusted iron 159BV5 Code 26 Rusted iron 159BV4 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 26 Rusted iron 159BV6 PAGE 160 DOOR AND CUPBOARD BOLTS These bolts can be provided with either a surface mounted or mortise strike. Code 13 Patinated iron 160CF4 Code 13 Patinated iron 160CF2 Code 13 Patinated iron 160CF3 Code 13 Patinated iron 160CF1 PRODUCT SIZE All products are shown full size over a 1/4” grid. DOOR AND CUPBOARD BOLTS The bolt on the upper-left is not supplied with strikes. Code 13 Patinated iron 161CF7 Code 7 Black iron 161RE39 PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 7 Black iron 161RE38 PAGE 161 DOOR LATCHES AND LOCKS PAGE 162 These English mortise latches have 8mm hubs. The lever strength has heavy duty springing suitable for heavy, unsprung levers. Code 3 Brass trim Lever strength Backset: 1 3/4” 162ALB1 Backset: 2 1/4” 162ALB2 Backset: 3 1/2” 162ALB3 Knob strength Backset: 2 1/4” 162ALB4 PRODUCT SIZE All products are shown full size over a 1/4” grid. These high quality tubular latches have 8mm hubs. The 2” backset body is only 2 5/8” deep. Code 8 Lever strength Polished brass Backset:2” 162TL3P Backset: 2 3/8” 162TL1P Backset: 2 3/4” 162TL2P Antiqued brass Backset: 2” 162TL3A Backset: 2 3/8” 162TL1A Backset: 2 3/4” 162TL2A Satin nickel Backset: 2 3/8” 162TL1SN Backset: 2 3/4” 162TL2SN Black Backset: 2 3/8” 162TL1B Backset: 2 3/4” 162TL2B Code 8 Knob strength Polished brass Backset: 2 3/8” 162TK1P Backset: 2 3/4” 162TK2P Antiqued brass Backset: 2 3/8” 162TK1A Backset: 2 3/4” 162TK2A Satin nickel Backset: 2 3/8” 162TK1SN Backset: 2 3/4” 162TK2SN Black Backset: 2 3/8” 162TK1B Backset: 2 3/4” 162TK2B MORTISE DOOR LOCKSETS PAGE 163 These latches on these locksets are lever strength only. Code 8 For Euro Cylinder (3 5/16” c/c) Polished brass Backset: 2 1/2” 163BEL1 Backset: 2 3/4” 163BEL2 Backset: 4” 163BEL3 US10B (dark) Backset: 2 1/2” 163BEL4 Backset: 2 3/4” 163BEL5 Backset: 4” 163BEL6 Satin nickel Backset: 2 1/2” 163BEL7 Backset: 2 3/4” 163BEL8 Backset: 4” 163BEL9 Our Eurocylinders use Shlage “C” keyway. The 2 7/16” length will suit 1 3/4” doors when combined with our trim. The 2 7/8” length will suit 2 1/4” thick doors. Code 3 For EuroCylinder (2” c/c) Brass trim Backset: 1 3/4” 163ADE1 Backset: 2 1/4” 163ADE2 Backset: 3 1/2” 163ADE3 For Skeleton key (2” c/c) Brass trim Backset: 1 3/4” 163ADF1 Backset: 2 1/4” 163ADF2 Backset: 3 1/2” 163ADF3 Code 8 Keyed EuroCylinder Polished brass Body length: 2 7/16” 163BEC1 Body length: 2 7/8” 163BEC2 US10B (dark) Body length: 2 7/16” 163BEC3 Body length: 2 7/8” 163BEC4 Satin nickel Body length: 2 7/16” 163BEC5 Body length: 2 7/8” 163BEC6 PAGE 164 DEADBOLTS AND SLIDING DOOR LOCKSET Code 26 Rusted iron Backset:2 3/8” 165DR1 Backset:2 3/4” 165DR2 Code 8 Polished brass Backset:2 3/8” 165DB1 Backset:2 3/4” 165DB2 US10B (dark) Backset:2 3/8” 165DB3 Backset:2 3/4” 165DB4 Satin nickel Backset:2 3/8” 165DB5 Backset:2 3/4” 165DB6 Black Backset:2 3/8” 165DB7 Backset:2 3/4” 165DB8 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. These American sliding door latches are supplied with thumbturn trim on both sides. A thumbturn can be removed from one trim plate if a privacy function is required. Code 11 Polished brass 165SDL3PB Antiqued brass 165SDL3A Polished chrome 165SDL3PC Satin nickel 165SDL3SN Polished nickel 165SDL3PN PAGE 165 CAST BRASS RIM LOCKS These rim locks are English made and have 8mm hubs to suit our Code 1 knobs or rings. The ring shown in the photograph is not included with the rim lock, but is available on page 124. The round and oval knobsets on page 109 are for use with these rim locks. Code 3 Polished brass Size: 8” x 4” Right hand Left hand (shown) Size: 6” x 3” Right hand Left hand 165BRL2R 165BRL2L 165BRL1R 165BRL1L PRODUCT SIZE All products are shown full size over a 1/4” grid. PAGE 166 CAST BRASS RIM LOCKS These rim locks are English made and have 8mm hubs to suit our Code 1 knobs or rings. The round and oval knobsets on page 109 are for use with these rim locks. Code 3 Polished brass 166RLF2 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern.
