5" – 11" Texas Pre-Engineered Submersible Turbine Pumps

Transcription

TECHNICAL BROCHURE
BR5-11TPE
FEATURES
Discharge Bowl: Several discharge sizes available (NPT).
Discharge Bearing: Extra long sealed top bronze bearing insures shaft alignment and stabilization for
extended life.
Intermediate Bowl: Class 30 cast iron. Glass coating on 6" and larger bowls for maximum efficiency and
abrasion resistance.
Impellers: Designed for maximum efficiency with a wide range hydraulic coverage. Made of low zinc
and no lead material suitable for drinking water applications.
Taperlock: Accurately machined to ensure positive locking of the impeller to the pump shaft.
Upthrust Collar: Designed with extra margin of safety against momentary upthrust at start-up.
Suction Adapter: Designed to ensure proper pump/motor alignment. Open area permits easy access to
pump/motor coupling. Casting made of ductile iron for increased strength.
Pump to Motor Coupling: Stainless steel coupling accurately machined for perfect alignment, balance
and power transmission.
Pump Shaft: 100,000 PSI high tensile type 416 stainless steel provides strength and corrosion resistance.
Ground and polished for smooth bearing surface.
Powered for Continuous Operation: All horsepower ratings are within the service limits of the motor and
pump can be operated continuously without fear of damage to the motor.
CentriPro Motors:
• Corrosion-resistant construction • Stainless steel splined shaft • Hermetically sealed windings on 6"
motors. 8" and 10" motors are water tight rewindable. • Sand resistant slinger and lip seals • Water filled
design • Filter check valve • Kingsbury-type thrust bearing • 6 through 30 HP motors are dual voltage
(230/460) design. Easily changed with a voltage plug.
5" – 11" Texas Pre-Engineered
Submersible Turbine Pumps
FOR 6" AND LARGER WELLS
Goulds Water Technology
Turbine
3450 RPM PERFORMANCE CHART
350
3450 RPM
60 Hz
300
250
10WAH
200
9RCH
9WAH
150
HEAD (FT.)
11CL
10WAL
9RCL
9WAL
7WAH
100
90
80
70
7W
AE
60
7CL
9TL
JH
7TH
8DHH
7TL
6CH
6CL
50
5RWAH 5CH
40
5RWAL
5TH
6DHL 6DHH
5CL
30
5TL
25
20
.2
7WAL
L
8R
7CH
8R
JL
9TH
.3
.4
.6
.8
1.0
1.5
3
2.0
4
5
6
7 8 9 10
15
20
25 30
40
FLOW (100 GPM)
SPECIFICATIONS
NOMENCLATURE DESCRIPTION
OperatingBest
HorsepowerDischargeMinimum
Model RangeEfficiency
Connections Well Size
GPM Flow Range
5RWALC 30 - 120
90
5 - 20
3", 4"
6"
5RWAHC 50 - 140
110
5 - 30
3", 4" 6"
5CLC
60 - 180
120
5 - 30
3", 4" 6"
5CHC
80 - 200
150
5 - 40
3", 4" 6"
5TLC
100 - 220
180
5 - 30
3", 4" 6"
5THC
125 - 300
240
5 - 50
3", 4" 6"
6CLC
100 - 250
180
7.5 - 40
3", 4" 8"
6CHC
150 - 350
250
10 - 50
3", 4" 8"
6DHLC
210 - 410
320
5 - 30
3", 4" 6"
6DHHC 300 - 600
450
7.5 - 40
3", 4" 6"
7WAEL
80 - 250
200
5 - 40
4", 5". 6"
8"
7WALC 150 - 330
240
7.5 - 60
4", 5", 6"
8"
7WAHC 150 - 350
280
10 - 75
4", 5", 6"
8"
7CLC
200 - 500
400
10 -100
4", 5", 6"
8"
7CHC
310 - 650
480
15 - 125
4", 5", 6"
8"
7TLC
300 - 700
550
10 -100
4", 5", 6"
8"
7THC
400 - 850
700
15 - 125
4", 5", 6"
8"
8RJLC
300 - 600
460
10 -100
4", 5", 6"
10"
8RJHC
400 - 900
650
15 -150
4", 5", 6"
10"
8DHHC 1100 - 1480 1200
30 - 200
4", 5", 6"
8"
9WALC 300 - 580
400
15 - 100
6", 8" 10"
9WAHC 320 - 660
450
20 -125
6", 8" 10"
9RCLC
500 - 1170
850
40 - 150
6", 8" 10"
9RCHC 600 - 1280
1080
60 - 200
6", 8" 10"
9TLC
800 - 1680
1300
40 - 200
6", 8" 10"
9THC
1000 - 1800 1600
60 - 200
6", 8" 10"
10WALC 400 - 830
600
25 - 125
6", 8" 12"
10WAHC 400 - 1040
750
40 -200
6", 8" 12"
11CLC
800 - 1750
1400
60 -200
6", 8" 12"
PAGE 2
C 07CHC010 A 6 6 S
1st Character –
“C” Designed for CentriPro motor
2nd & 3rd Character –
Nominal Bowl Size
4th, 5th & 6th Character –
Pump Model
7th, 8th & 9th Character –
Horsepower
10th Character –
Different configuartion for the same HP motor
11th Character –
Suction adapter/Motor Size**
12th Character –
Discharge Size
13th Character – Bearing Configurations
S = Sealed Top Bearing – with rubber intermediate bearings
B = Sealed Top Bearing – with bronze intermediate bearings
** “0” designates a 10” motor size.
The products in this bulletin are NSF Listed.
Performance based upon CentriPro motors.
Consult factory if using other than CentriPro.
Turbine
MODEL 5RWAL 90 GPM
Recommended operating range
– – – – – Alternate pump selection is available
DIMENSIONS AND WEIGHTS
HPStages
54
7.56
10
8
15
10
15
12
20
15
20
18
W.E. Order
Number
C05RWL005A44B
C05RWL005A64B
C05RWL007A44B
C05RWL007A64B
C05RWL010A64B
C05RWL015A64B
C05RWL015B64B
C05RWL020A64B
C05RWL020B64B
4" NPT DISCHARGE
CONNECTION
W.E.
Length
25.3
27.4
33.3
35.4
43.4
51.4
59.4
71.4
83.4
W.E.
Wt. (lbs.)
75
83
100
108
132
156
179
216
252
541⁄64"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
(All dimensions in inches and weights in lbs. Do not use for construction
purposes.)
NOTES:
1.All dimensions in inches and weights in lbs.
2.Solid line is recommended operating range.
3.For intermediate horsepower pumps consult factory.
4.Please specify all options changes in W.E. order number.
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
MATERIALS OF CONSTRUCTION
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Intermediate Bowl Bearing ASTM B584 C89835 (Std.)
Intermediate Bowl Bearing
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
Discharge Bowl Bearing
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
PAGE 3
Turbine
MODEL 5RWAH 110 GPM
– – – – –
HPStages
53
7.54
10
6
15
9
20
12
25
15
30
18
W.E. Order
Number
C05RWH005A44B
C05RWH005A64B
C05RWH007A44B
C05RWH007A64B
C05RWH010A64B
C05RWH015A64B
C05RWH020A64B
C05RWH025A64B
C05RWH030A64B
4" NPT DISCHARGE
CONNECTION
W.E.
Length
21.3
23.4
25.3
27.3
35.4
51.4
59.4
71.4
83.4
W.E.
Wt. (lbs.)
64
72
75
83
107
155
177
213
252
purposes.)
NOTES:
PAGE 4
541⁄64"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
Alternate pump selection is available
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
Turbine
MODEL 5CLC 120 GPM
– – – – –
HPStages
53
7.54
10
6
15
7
15
9
20
12
25
14
30
17
W.E. Order
Number
C05CLC005A44B
C05CLC005A64B
C05CLC007A44B
C05CLC007A64B
C05CLC010A64B
C05CLC015A64B
C05CLC015B64B
C05CLC020A64B
C05CLC025A64B
C05CLC030A64B
W.E.
Length
25.2
27.5
29.8
32.1
41.4
46.1
55.3
69.2
78.5
92.3
4" NPT DISCHARGE
CONNECTION
W.E.
Wt. (lbs.)
70
75
83
88
114
127
153
192
218
257
purposes.)
NOTES:
541⁄64"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
PAGE 5
Turbine
MODEL 5CHC 150 GPM
– – – – –
HPStages
52
7.53
10
4
15
6
20
8
25
10
30
12
40
16
W.E. Order
Number
C05CHC005A44B
C05CHC005A64B
C05CHC007A44B
C05CHC007A64B
C05CHC010A64B
C05CHC015A64B
C05CHC020A64B
C05CHC025A64B
C05CHC030A64B
C05CHC040A64B
4" NPT DISCHARGE
CONNECTION
W.E.
Length
20.2
22.8
25.2
27.5
32.1
41.4
50.7
59.9
69.2
87.7
W.E.
Wt. (lbs.)
57
62
70
75
88
114
140
166
192
244
purposes.)
NOTES:
PAGE 6
541⁄64"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
Turbine
MODEL 5TLC 180 GPM
– – – – –
4" NPT DISCHARGE
CONNECTION
HPStages 52
7.54
10
5
15
8
20
10
W.E. Order
Number
C05TLC005A44B
C05TLC005A64B
C05TLC007A44B
C05TLC007A64B
C05TLC010A64B
C05TLC015A64B
C05TLC020A64B
W.E.
Length
20.9
23.3
30.4
32.8
37.6
52.0
61.7
W.E.
Wt. (lbs.)
57
62
82
87
101
140
166
25
30
C05TLC025A64B
C05TLC030A64B
76.0
90.6
205
244
13
16
541⁄64"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
PAGE 7
Turbine
MODEL 5THC 240 GPM
– – – – –
HPStages
52
10
3
15
5
20
7
25
8
30
10
40
13
50
14
50
16
W.E. Order
Number
C05THC005A44B
C05THC005A64B
C05THC010A64B
C05THC015A64B
C05THC020A64B
C05THC025A64B
C05THC030A64B
C05THC040A64B
C05THC050A64B
C05THC050A64B
4" NPT DISCHARGE
CONNECTION
W.E.
Length
20.9
23.3
28.0
37.6
47.3
52.0
61.7
76.0
80.7
90.6
W.E.
Wt. (lbs.)
57
62
75
101
127
153
166
218
221
257
purposes.)
NOTES:
PAGE 8
541⁄64"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
Turbine
MODEL 6CLC 180 GPM
– – – – –
4" NPT DISCHARGE
CONNECTION
HPStages
7.52
10
3
15
5
20
6
25
7
25
8
W.E. Order
Number
C06CLC007A44B
C06CLC007A64B
C06CLC010A64B
C06CLC015A64B
C06CLC020A64B
C06CLC025A64B
C06CLC025A64B
W.E.
Length
22.4
24.6
34.8
40.0
45.2
50.3
55.4
W.E.
Wt. (lbs.)
67
72
89
123
140
157
174
30
40
40
C06CLC030A64B
C06CLC040A64B
C06CLC040B64B
60.5
65.6
75.8
191
208
242
9
10
12
purposes.)
NOTES:
619⁄64"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (optional)
Polyethylene
ASTM A48 CI. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
PAGE 9
Turbine
MODEL 6CHC 250 GPM
– – – – –
HPStages
10
2
15
3
20
4
25
5
30
6
40
8
50
9
50
10
W.E. Order
Number
C06CHC010A64B
C06CHC015A64B
C06CHC020A64B
C06CHC025A64B
C06CHC030A64B
C06CHC040A64B
C06CHC050B64B
C06CHC050A64B
4" NPT DISCHARGE
CONNECTION
W.E.
Length
24.6
29.7
34.8
40.0
50.3
55.4
60.5
65.6
W.E.
Wt. (lbs.)
72
89
106
123
157
174
191
208
purposes.)
NOTES:
5.50 hp performance curve based on using 8" motor with 6" flange.
Consult factory if you want 6" motor.
PAGE 10
619⁄64"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
Turbine
MODEL 6DHLC 320 GPM
– – – – –
HPStages
51
7.52
10
3
15
4
20
5
25
6
30
7
W.E. Order
Number
C06DLC005A44B
C06DLC005A64B
C06DLC007A44B
C06DLC007A64B
C06DLC010A64B
C06DLC015A64B
C06DLC020A64B
C06DLC025A64B
C06DLC030A64B
4" NPT DISCHARGE
CONNECTION
W.E.
Length
14.2
19.0
19.7
24.5
30.0
35.5
41.0
46.5
52.0
W.E.
Wt. (lbs.)
35
55
51
71
89
101
125
143
168
515⁄16"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM B584 C87610
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
PAGE 11
Turbine
MODEL 6DHHC 450 GPM
– – – – –
HP Stages 51
15
2
20
3
25
4
30
5
40
6
W.E. Order
Number
C06DHC007A44B
C06DHC007A64B
C06DHC015A64B
C06DHC020A64B
C06DHC025A64B
C06DHC030A64B
C06DHC040A64B
4" NPT DISCHARGE
CONNECTION
W.E.
Length
14.2
19.0
24.5
30.0
35.5
41.0
46.5
W.E.
Wt. (lbs.)
35
55
71
89
101
125
143
purposes.)
NOTES:
PAGE 12
515⁄16"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
3¾"
(4" MTR.)
51⁄2"
(6" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM B584 C87610
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
Turbine
MODEL 7WAEL 200 GPM
– – – – –
HPStages
5
1
10
2
15
3
20
4
25
5
30
6
40
7
40
8
W.E. Order
Number
C07WAE000A66B
C07WAE010A66B
C07WAE015A66B
C07WAE020A66B
C07WAE025A66B
C07WAE030A66B
C07WAE040A66B
C07WAE040A66B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
22.0
27.5
33.0
38.5
44.0
49.5
55.0
60.5
W.E.
Wt. (lbs.)
68
98
128
158
188
218
248
278
7½"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (optional)
Polyethylene
ASTM A48 CI. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
PAGE 13
Turbine
MODEL 7WALC 240 GPM
– – – – –
HPStages
7.5
1
15
2
25
3
30
4
40
5
40
6
50
7
60
8
W.E. Order
Number
C07WAL007A66B
C07WAL015A66B
C07WAL025A66B
C07WAL030A66B
C07WAL040A66B
C07WAL040B66B
C07WAL050A86B
C07WAL060A86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
22.0
27.5
33.0
38.5
44.0
49.5
55.0
60.5
W.E.
Wt. (lbs.)
68
98
128
158
188
218
248
278
purposes.)
NOTES:
PAGE 14
7½"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 Cl. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (Optional)
Polyethylene
ASTM A48 Cl. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
Turbine
MODEL 7WAHC 280 GPM
– – – – –
HPStages
10
1
20
2
25
3
30
3
40
4
50
5
60
6
75
7
W.E. Order
Number
C07WAH010A66B
C07WAH020A66B
C07WAH025A66B
C07WAH030A66B
C07WAH040A66B
C07WAH050A86B
C07WAH060A86B
C07WAH050A86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
22.0
27.5
33.0
33.0
38.5
44.0
49.5
55.0
W.E.
Wt. (lbs.)
68
98
128
128
158
188
218
260
7½"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (optional)
Polyethylene
ASTM A48 CI. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
PAGE 15
Turbine
MODEL 7CLC 400 GPM
– – – – –
HPStages
10
1
20
2
30
3
40
4
50
5
60
6
75
7
100
8
100
9
W.E. Order
Number
C07CLC010A66B
C07CLC020A66B
C07CLC030A66B
C07CLC040A66B
C07CLC050A86B
C07CLC060A86B
C07CLC075A86B
C07CLC100A86B
C07CLC100B86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
22.9
29.3
35.6
42.0
48.4
54.8
62.8
70.8
75.8
W.E.
Wt. (lbs.)
75
103
131
159
187
215
255
283
311
7½"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
5.50 hp performance curve based on using 8" motor with 6" flange.
PAGE 16
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (optional)
Polyethylene
ASTM A48 CI. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
Turbine
MODEL 7CHC 500 GPM
– – – – –
HPStages
15
1
30
2
40
3
50
3
60
4
75
4
100
5
100
6
125
7
W.E. Order
Number
C07CHC015A66B
C07CHC030A66B
C07CHC040A66B
C07CHC050A86B
C07CHC060A86B
C07CHC075A66B
C07CHC100A86B
C07CHC100B86B
C07CHC125A86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
22.9
29.3
35.6
35.6
42.0
43.6
50.0
56.5
63.0
W.E.
Wt. (lbs.)
75
103
131
131
159
171
199
227
255
7½"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
PAGE 17
Turbine
MODEL 7TLC 550 GPM
– – – – –
HPStages
10
1
20
2
30
3
40
4
50
5
60
6
75
7
100
8
100
9
W.E. Order
Number
C07TLC010A66B
C07TLC020A66B
C07TLC030A66B
C07TLC040A66B
C07TLC050A66B
C07TLC060A66B
C07TLC075A86B
C07TLC100A86B
C07TLC010B86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
23.6
30.7
37.8
44.9
52.0
59.1
67.1
74.2
81.3
W.E.
Wt. (lbs.)
78
109
140
171
202
233
276
307
338
7½"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
PAGE 18
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
Turbine
MODEL 7THC 700 GPM
– – – – –
HPStages 15
1
30
2
50
3
60
4
75
5
100
6
125
7
125
8
W.E. Order
Number
C07THC015A66B
C07THC030A66B
C07THC050A86B
C07THC060A86B
C07THC075A86B
C07THC100A86B
C07THC125A86B
C07THC125B86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
23.6
30.7
37.8
44.9
52.9
60.0
67.1
74.2
W.E.
Wt. (lbs.)
78
109
140
171
214
245
276
307
7½"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (optional)
Polyethylene
ASTM A48 CI. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
PAGE 19
Turbine
MODEL 8RJLC 460 GPM
– – – – –
HPStages
10
1
25
2
30
3
40
4
50
4
60
5
75
6
100
7
100
8
W.E. Order
Number
C08JLC010A66B
C08JLC025A66B
C08JLC030A66B
C08JLC040A66B
C08JLC050A86B
C08JLC060A86B
C08JLC075A86B
C08JLC100A86B
C08JLC100B86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
23.0
29.5
36.0
42.5
42.5
49.0
63.7
70.2
76.7
W.E.
Wt. (lbs.)
90
124
258
292
292
326
272
306
340
7½"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
PAGE 20
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM B584 C87610
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
Turbine
MODEL 8RJHC 650 GPM
– – – – –
HPStages
20
1
30
2
40
2
50
3
60
3
75
4
100
5
125
6
150
7
W.E. Order
Number
C08JHC020A66B
C08JHC030A66B
C08JHC040A66B
C08JHC050A86B
C08JHC060A86B
C08JHC075A86B
C08JHC100A86B
C08JHC125A86B
C08JHC150A86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
23.0
29.5
29.5
36.0
36.0
50.7
57.2
63.7
70.2
W.E.
Wt. (lbs.)
90
124
124
258
258
204
238
272
306
77⁄8"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM B584 C87610
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (optional)
Polyethylene
ASTM A48 CI. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
PAGE 21
Turbine
MODEL 8DHHC 1200 GPM
– – – – –
HPStages
30
1
60
2
100
3
125
4
150
5
200
6
W.E. Order
Number
C08DHC030A66B
C08DHC060A86B
C08DHC100A86B
C08DHC125A86B
C08DHC150A86B
C08DHC200A06B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
23.9
31.3
47.7
55.1
62.5
69.8
W.E.
Wt. (lbs.)
125
159
205
239
273
307
purposes.)
NOTES:
5.200 HP is 10" motor.
PAGE 22
77⁄8"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
833⁄64"
(10" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM B584 C87610
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
Turbine
MODEL 9WALC 400 GPM
– – – – –
HPStages
15
1
25
2
30
2
40
3
50
3
60
4
75
4
100
5
100
6
W.E. Order
Number
C09WAL015A66B
C09WAL025A66B
C09WAL030A66B
C09WAL040A66B
C09WAL050A86B
C09WAL060A86B
C09WAL075A86B
C09WAL100A86B
C09WAL100B86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
26.3
32.9
32.9
39.5
39.5
46.1
44.3
50.9
57.5
W.E.
Wt. (lbs.)
158
216
216
274
274
332
344
402
460
913⁄16"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
purposes.)
NOTES:
5.50 HP Performance curve based on using 8" motor with 6" flange.
53⁄8"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM B584 C87610
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
PAGE 23
Turbine
MODEL 9WAHC 450 GPM
– – – – –
HPStages
20
1
25
1
40
2
50
2
60
3
75
3
100
4
125
5
W.E. Order
Number
C09WAH020A66B
C09WAH025A66B
C09WAH040A66B
C09WAH050A86B
C09WAH060A86B
C09WAH075A86B
C09WAH100A86B
C09WAH125A86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
26.3
26.3
32.9
32.9
39.5
37.6
44.3
50.9
W.E.
Wt. (lbs.)
158
158
216
216
274
332
344
402
purposes.)
NOTES:
PAGE 24
913⁄16"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
53⁄8"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM B584 C87610
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (optional)
Polyethylene
ASTM A48 CI. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
Turbine
MODEL 9RCLC 850 GPM
– – – – –
HPStages
40
1
60
2
75
2
100
3
125
3
150
4
W.E. Order
Number
C09RCL040A66B
C09RCL060A86B
C09RCL075A86B
C09RCL100A86B
C09RCL125A86B
C09RCL150A86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
28.0
36.6
34.8
43.2
43.2
51.8
W.E.
Wt. (lbs.)
194
258
270
334
334
398
purposes.)
NOTES:
913⁄16"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
53⁄8"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 Cl. 30B
Rubber (Optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 Cl. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
PAGE 25
Turbine
MODEL 9RCHC 1100 GPM
– – – – –
HPStages
60
1
100
2
125
2
150
3
175
3
200
4
W.E. Order
Number
C09RCH060A86B
C09RCH100A86B
C09RCH125A86B
C09RCH150A86B
C09RCH175A06B
C09RCH200A06B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
28.0
34.8
34.8
43.5
43.5
51.8
W.E.
Wt. (lbs.)
194
270
270
334
334
398
purposes.)
NOTES:
5.175 HP and 200 HP are 10" motor.
PAGE 26
913⁄16"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
833⁄64"
(10" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 Cl. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (Optional)
Polyethylene
ASTM A48 Cl. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
Turbine
MODEL 9TLC 1300 GPM
– – – – –
HPStages
40
1
60
2
75
2
100
3
125
3
150
4
200
5
W.E. Order
Number
C09TLC040A66B
C09TLC060A86B
C09TLC075A86B
C09TLC100A86B
C09TLC125A86B
C09TLC150A86B
C09TLC200A06B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
28.9
38.1
36.3
45.5
45.5
57.8
70.1
W.E.
Wt. (lbs.)
200
270
282
352
352
422
492
purposes.)
NOTES:
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
ASTM A536 Gr. 60-40-18
913⁄16" Suction Adapter
Effective Suction Bearing
ASTM B584 C89835
diameter
ASTM A744 CF8M
with Impeller
cable Taperlock
ASTM A108 Gr. 1018
guard
Intermediate Bowl
ASTM A49 Cl. 30B
Rubber (Optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 Cl. 30B
ASTM B584 C89835
51⁄2" Discharge Bowl Bearing
(6" MTR.) Fasteners
SAE J429 Gr. 8
733⁄64" Cable Guard
ASTM A240 S30400
(8" MTR.)
Suction Strainer
ASTM A240 S30400
833⁄64"
(10" MTR.)
PAGE 27
Turbine
MODEL 9THC 1600 GPM
– – – – –
HPStages
60
1
100
2
125
2
150
3
200
4
W.E. Order
Number
C09THC060A86B
C09THC100A86B
C09THC125A86B
C09THC150A86B
C09THC200A06B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
28.9
36.3
36.3
45.5
57.8
W.E.
Wt. (lbs.)
200
282
282
352
422
913⁄16"
Effective
diameter
with
cable
guard
W.E.
purposes.)
NOTES:
PAGE 28
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
833⁄64"
(10" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 Cl. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (Optional)
Polyethylene
ASTM A48 Cl. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
Turbine
MODEL 10WALC 600 GPM
– – – – –
HPStages
25
1
40
1
50
2
75
3
100
3
125
4
W.E. Order
Number
C10WAL025A66B
C10WAL040A66B
C10WAL050A86B
C10WAL075A86B
C10WAL100A66B
C10WAL125A86B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
27.3
27.3
33.0
40.6
40.6
48.3
W.E.
Wt. (lbs.)
183
183
244
300
300
356
purposes.)
NOTES:
10"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
53⁄8"
(6" MTR.)
733⁄64"
(8" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM B584 C87610
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Rubber (optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 CI. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
PAGE 29
Turbine
MODEL 10WAHC 850 GPM
– – – – –
HPStages
40
1
50
1
75
2
100
2
150
3
200
4
W.E. Order
Number
C10WAH040A66B
C10WAH050A86B
C10WAH075A86B
C10WAH100A86B
C10WAH150A86B
C10WAH200A06B
6" NPT DISCHARGE
CONNECTION
W.E.
Length
27.3
27.3
33.0
33.0
40.6
48.3
W.E.
Wt. (lbs.)
183
183
244
244
300
356
purposes.)
NOTES:
PAGE 30
10"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
833⁄64"
(10" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM B584 C87610
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 CI. 30B
Upthrust Collar
Discharge Bowl
Fasteners
Cable Guard
Suction Strainer
Rubber (optional)
Polyethylene
ASTM A48 CI. 30B
ASTM B584 C89835
SAE J429 Gr. 8
ASTM A240 S30400
ASTM A240 S30400
Turbine
MODEL 11CLC 1400 GPM
– – – – –
6" or 8" NPT
DISCHARGE
CONNECTION
HPStages
60
1
75
1
100
1
125
2
150
2
175
2
200
3
W.E. Order
Number
C11CLC060A88B
C11CLC075A88B
C11CLC100A88B
C11CLC125A88B
C11CLC150A88B
C11CLC175A08B
C11CLC200A08B
W.E.
Length
28.3
28.3
28.3
38.1
38.1
38.1
48.0
W.E.
Wt. (lbs.)
285
285
285
382
382
382
479
purposes.)
NOTES:
111⁄2"
Effective
diameter
with
cable
guard
W.E.
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
51⁄2"
(6" MTR.)
733⁄64"
(8" MTR.)
833⁄64"
(10" MTR.)
Part Name Material
Shaft
ASTM A582 S41600
Coupling
ASTM A582 S41600
Suction Adapter
ASTM A536 Gr. 60-40-18
Suction Bearing
ASTM B584 C89835
Impeller
ASTM A744 CF8M
Taperlock
ASTM A108 Gr. 1018
Intermediate Bowl
ASTM A49 Cl. 30B
Rubber (Optional)
Upthrust Collar
Polyethylene
Discharge Bowl
ASTM A48 Cl. 30B
ASTM B584 C89835
Fasteners
SAE J429 Gr. 8
Cable Guard
ASTM A240 S30400
Suction Strainer
ASTM A240 S30400
PAGE 31
Xylem
1) The tissue in plants that brings water upward from the roots;
2) a leading global water technology company.
We’re 12,500 people unified in a common purpose: creating innovative solutions
to meet our world’s water needs. Developing new technologies that will improve
the way water is used, conserved, and re-used in the future is central to our work.
We move, treat, analyze, and return water to the environment, and we help people
use water efficiently, in their homes, buildings, factories and farms. In more than
150 countries, we have strong, long-standing relationships with customers who
know us for our powerful combination of leading product brands and applications
expertise, backed by a legacy of innovation.
For more information on how Xylem can help you, go to www.xyleminc.com
Xylem, Inc.
P.O. Box 5487
Lubbock, TX 79408
Phone: (806) 763-7867
Fax: (800) 453-4749
www.xyleminc.com/brands/gouldswatertechnology
Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license.
© 2012 Xylem Inc. BR5-11TPE September 2011

5" – 11" Texas Pre-Engineered Submersible Turbine Pumps

Transcription

Similar documents

2013 PRODUCT CATALOG

click here to the PDF file.

FONDERIE I FOUNDRY since its founding in 1975, Fondremy has