Technical solutions for chain saws.

Transcription

CONTENTS
Husqvarna - a leading
authority
5
The user in focus
7
Intelligent solutions
9
Professionalism
11
¢ Chain saws and power cutters
¢ Forestry clearing saws,
brushcutters, trimmers and
edgers
Technical solutions for forestry clearing saws
and brushcutters
126
Forestry Clearing Saws
128
Specifications for forestry clearing saws
130
Brushcutters
132
Backpack Brushcutters
143
Specifications for brushcutters
144
150
Technical solutions for chain saws
12
Technical solutions for trimmers and edgers
Chain saws
14
Trimmers
152
Specifications for chain saws
62
Specifications for trimmers
158
Pole saws
72
Attachments
161
Specifications for pole saws
74
Trimmer spark plugs
163
Electric chain saws
75
Harnesses
164
Specifications for electric chain saws
77
Heads and blades
168
Cutting equipment guide for saws
78
Guards
174
Bars
80
Trimmer cords
178
Chains
87
182
184
Filing equipment
101
Accessory guide for trimmers and
brushcutters
Air filters for chain saws
106
Edgers
Other accessories
110
Technical solutions for power cutters
114
Power cutters
115
Technical solutions for hedge trimmers
Specifications for power cutters
118
Hedge Trimmers
187
Power cutters accessories
120
Specifications for hedge trimmers
194
Cutting discs
124
Hedgetrimmer, Pruner, Edger and Ice Auger
accessories
197
Blowers
200
Specifications for blowers
204
Blower accessories
206
¢ Hedge trimmers and blowers
186
¢ Riders
Technical solutions for Riders
208
Riders
210
Specifications for Riders
218
¢ Tractors
Technical solutions for tractors
222
Tractors
224
Specifications for tractors
232
¢ Accessories for Riders and
tractors
Accessories for Riders and Tractors
235
¢ ZTH
¢ Special equipment
Technical solutions for ZTH
248
Ice auger
308
Zero turn mowers
249
Snow throwers
309
Specifications for ZTH
252
Specifications for snow throwers
311
Commercial mower accessories
254
¢ Special products for lawn care
¢ Clothes, tools and accessories
Comfortable and protective
312
Clothes
313
Technical solutions for special products for
lawn care
260
Boots
330
Aerators
262
Head, hearing and sight protection
340
Sod Cutters
263
Gloves
351
Stump grinders
264
Tools
355
Dethatchers
265
Tree care tools
366
Lawn Care Accessories
266
Cans
371
Lubricants
375
¢ Traditional lawn mowers
Technical solutions for traditional lawn
mowers
270
Petrol lawn mowers
272
Specifications for petrol lawn mowers
282
Manual lawn mowers
288
Specifications for manual lawn mowers
289
Lawn mower accessories
290
Robotic mowers
291
Specifications for robotic mowers
294
Automower accessories
295
¢ Cultivators
Technical solutions for cultivators
300
Cultivators
301
Specifications for cultivators
304
Cultivator Accessories
306
¢ Workshop concept
Handtools, general purpose
383
Pressure testing tools
385
Ignition system
388
Carburettor
391
Clutch, oiler
393
Crankcase, crankshaft
395
Cylinder, piston
399
Vibration damping
401
Chain tools
402
Bevel gear tools
404
Tractor, rider
405
Workshop equipment
407
Clothing
411
H U S QVA R N A –
A L E A D I N G AU T H O R I T Y.
Authority doesn’t come by accident, it’s a result of extensive knowledge and experience.
The fact that we started manufacturing firearms over 300 years ago makes us one of the world’s
very oldest precision industrial concerns. The fact that we started making bicycles and motorcycles
over 100 years ago further highlights our vast experience of precision manufacturing in long
production series. Add the fact that forestry has been an important primary industry in Sweden
for centuries, and you have part of the reason why Husqvarna has taken a leading position
among producers of outdoor products.
1689
1978
King Karl XI commands the establishment of a factory for
the production of muskets. The name is to be Husqvarna
Gevärsfaktori (the Husqvarna Rifle Factory).
The Rancher 50 is introduced. The successor, model 55,
is a classic, still in production and several million of them
have been made over the years.
1872
1980
The manufacture of sewing machines and household
products begins.
Husqvarna presents the first saw with a crankcase built
of composite material, the model 40.
1983
1896
The modell 154 is launched. A very light professional saw,
with many parts made of plastic.
Husqvarna makes its first bicycle.
1903
1986
The manufacture of motorcycles begins.
Husqvarna presents the Rider, a revolutionary ride-on
mower with a front-mounted cutting deck and an advanced
articulated steering system, with unique geometry.
1918
New products: boilers and hand mowers.
1992–1993
1934–1958
Husqvarna introduces Air Injection. The unique filter
system in our saws that utilises centrifugal force to separate
woodchips and dust from the intake filter.
Husqvarna develops electric stoves, dishwashers,
washing machines and microwave ovens (the first one
for household use).
1995
1959
Husqvarna launches the Solar Mower. The world’s first
robotic lawn mower, that works completely on its own,
and gets its power from the sun.
Our first chain saw is presented.
1965
1998
Model 70, the world’s first chain saw for limbing
as well as felling and cross cutting.
1969
Husqvarna presents the Auto Mower. A batterypowered further development of the robotic Solar Mower.
The Auto Mower recharges itself.
Husqvarna presents the model 80, the world’s first chain
saw with integrated vibration damping.
2000
357XP, the most advanced pro machine in the 50–60 cc
class. A huge success thanks to its extremely high power
and excellent manoeuvrability.
1973
Model 140, the first chain saw with automatic
double-acting chain brake. The technology has become
standard for all chain saws.
2003
Husqvarna presents the world’s first forestry clearing saw
with heated handles.
5
6
THE USER IN FOCUS.
For us, it has always been natural to start out from the user’s situation. When we develop
products, what guides us is the user’s need of labour-saving and reliable tools and problem-free
working conditions.
Safety
Ergonomics
With extensive knowledge of how a tool is used in
practice, we can design it to minimise the risk of accidents.
Examples include the chain brake on chain saws, the safety
switch on the seat of Riders and the dead-man’s grip on
lawn mowers.
This is also why we provide our retailers and our
users with extensive knowledge and safety instructions,
so that the tools are handled in the right way.
The tools must make the job easier, never harder.
This is why we focus so much on ergonomic design,
so the working posture and hand positions are restful
and natural. Our aim is that the tool will deliver the
optimal results with a minimum of effort from the user.
Reliability and quality
A reliable tool becomes a friend, an unreliable one an
enemy – a fact of huge importance for the professional
user. Therefore we always develop our machines in
difficult, realistic conditions, and test them in extreme
situations.
Working environment
All our tools are designed to offer the best working
environment possible. For us, the term ‘working environment’ includes a number of factors such as maintenance,
handling, noise and emissions. Of course we also place
a great emphasis on ensuring the products have a minimal
impact on the global environment.
7
8
I N T E L L I G E N T S O LU T I O N S .
Creativity and intelligent solutions are the result of listening carefully, of wholistic thinking, and
of knowledge and experience. Thanks to our extensive resources that have enabled us to turn new
ideas into reality, we have been responsible for numerous pioneering innovations over the years.
Intelligent solutions, that make often difficult, strenuous jobs increasingly easy and efficient.
Active development
Increased knowledge
By maintaining close contact with the professionals
on the market, we get continual inspiration and impulses
for new ideas and solutions. Participating in and arranging
competitions, trade fairs and events also helps us keep
up to date in our field.
In addition to the purely technical development efforts,
we also work intensively to spread all our knowledge
to our retailers and users. Our knowledge manuals and
instructions make it easier for our retailers to put themselves in the user’s situation and to offer the correct
method and tool to meet his or her needs.
Similarly, the user is able to acquire extensive
knowledge, in order to use our products in the best and
most efficient way possible.
Full overview
As yet another result of our contact with the users,
we have gained a full overview of their working situation.
In addition to strictly product-related knowledge, this has
given us valuable insight in terms of protective equipment,
accessories and working conditions. Knowledge that in
many cases further inspires our product development.
9
10
P RO F E S S I O N A L I S M .
In our world, professionalism is our guiding principle. We co-operate closely with professionals
and listen to their views and experience. This we we can provide the most demanding users
with the proper tools, and our solutions can also benefit all the other users. But professionalism
also has a far wider meaning, when it comes to our local representatives.
Qualified servicing dealers as leading
local authorities
Our dealers must be able to give the most demanding
professionals, as well as the home users, good advice when
choosing machines and methods, and must also be able
to handle the maintenance and repair of our products.
Professionalism permeates our entire organisation.
Everything from research, development and production
to advice, service and maintenance of our products.
It’s then, that we can rightly assert that we are leading
authorities in the eyes of all our customers.
Our qualified servicing dealers are – each and every one
– our ambassadors to the outside world. As the face of
Husqvarna, and our most important direct contact with
the customers as well, it is absolutely essential that they
have the knowledge and resources to make them the leading
authority in their area. Husqvarna invests considerable
resources in ensuring that the customers are taken care of
in a professional manner.
For this reason, all of our dealers, all over the
world, receive continual training, in order to guarantee
professional competence right down to the local level.
11
Technical solutions
for chain saws.
There are few motorised handtools where the interaction between man and machine is so tangible
as with chain saws – the user has to be able to trust his machine whatever the weather. Our technical
development work continues our tradition of always listening to the requests of the professionals,
and keeping their working environment at the front of our minds. By meeting the demands of the
professional users, the benefits flow on to all the other users as well.
The E-TECH engines combine high power and low weight with reduced
emissions and user-friendly features.
Air Injection cleans the intake air, ensures smoother operation and extends
the filter cleaning intervals.
LowVib. Husqvarna’s efficient vibration-damping system, it means that the saw’s
handle is separated from the engine and cutting equipment. Normally using
steel springs that last many years and are less sensitive to oil, fuel, temperature
fluctuations and UV light.
Smart Start reduces the compression at the moment of starting, making it easier
to start the saw. Automatic Smart Start is an automatic decompression valve
which, without the user having to press any button, reduces the compression
at start, which makes it easier to pull the starter cord.
Rubber-mounted carburettor
gives smoother operation, more
stable settings and longer life.
Our advanced engine technology
combines maximum performance
and low weight.
Narrow saw body, high centre
of gravity and smooth underside
make the job easier, especially
when limbing.
12
Precision-forged, three-piece crankshafts for maximum durability. Used
on all saws.
Chain tensioning from the side is
faster and easier.
Easy-access oil pump control
makes it easy to adjust the chain
lubrication as required.
Quick-release on the air filter cover ensures easy access to the air filter
and spark plug for cleaning. On some models it can be removed without any
tools at all.
Right-hand guard, protects the
hand from branches and also from
the chain, if it should come off.
Found on all saws.
Combined choke/stop control
eliminates starting problems caused
by the stop button being in the
wrong position.
Air filter with quick release means
it’s easy to remove it for cleaning.
Heated handle (G). Increases
comfort on cold days.
Sturdy rear handle with soft inlays gives good control and a comfortable grip.
Husqvarna’s saws are equipped with
a chain brake.The brake is activated
manually or by inertia.
Easy-access fuel pump makes the
tree care saws easy to start, even
when up a tree.
The cutter heads on our pole saws are adjustable and have automatic chain
lubrication.
The tree care saws feature low weight, drop-shaped saw body and smooth
underside, which makes the saw easy to lower through the branches.
13
Chain saws
3120XP
Cylinder displacement: 118.8 cm³/7.3 cu.inch. Power: 6.2 kW/8.4 hp.
Fuel tank volume: 1.25l/2.64 US pint.
Oil tank volume: 0.70l/1.48 US pint. Chain pitch: .404".
Recommended bar length: 60-105 cm/24-42". Sound level: 101 dB(A).
Noise emissions, L WA: 116 dB(A). Vibrations, front/rear handle: 7.7 m/
s²/10.6 m/s². Weight excl. cutting equipment: 10.4 kg/22.9 lbs.
Engine - - hard wood markets
24” HN - .404” - H64 - AS - AU,NZ
965 96 01-01
965 96 03-24
*!3J1I8D-abjdca!
· Adjustable oil pump
· Oil pump with override
· Compensating carburettor
· Inertia-activated chain brake
*!3J1I8D-abjeib!
24” HN - .404” - H64 - - hard wood markets
28” HN - .404” - H64 - AS - AU,NZ
965 96 01-24
965 96 03-28
*!3J1I8D-abjddh!
· LowVib
· XP - High performance engine
· Smart Start decompression valve
· Quick release on air filter cover
*!3J1I8D-abjeji!
30” HN - .404” - H64 - AS - AU,NZ
28” HN - .404” - H64 - CE - Europe
24” HN - .404” - H64 - EPA - US,CA
965 96 01-28
965 96 03-30
965 96 04-28
965 96 07-24
*!3J1I8D-abjdee!
*!3J1I8D-ahagec!
*!3J1I8D-abjfhd!
*!3J1I8D-afbdjj!
36” HN - .404” - H64 - AS - AU,NZ
30” HN - .404” - H64 - CE - Europe
28” HN - .404” - H64 - EPA - US,CA
965 96 01-30
965 96 03-36
965 96 04-30
965 96 07-28
*!3J1I8D-abjdfb!
*!3J1I8D-abjfbb!
*!3J1I8D-ahagfj!
*!3J1I8D-afbeaf!
42” HN - .404” - H64 - AS - AU,NZ
36” HN - .404” - H64 - CE - Europe
30” HN - .404” - H64 - EPA - US,CA
965 96 01-36
965 96 03-42
965 96 04-36
965 96 07-30
*!3J1I8D-abjdhf!
*!3J1I8D-abjfci!
*!3J1I8D-abjfjh!
*!3J1I8D-ahaghd!
Engine - CE - Europe
42” HN - .404” - H64 - CE - Europe
36” HN - .404” - H64 - EPA - US,CA
965 96 01-42
965 96 04-01
965 96 04-42
965 96 07-36
*!3J1I8D-abjdic!
*!3J1I8D-abjffj!
*!3J1I8D-abjgad!
*!3J1I8D-afbebc!
Engine - AS - AU,NZ
24” HN - .404” - H64 - CE - Europe
Engine - EPA - US,CA
42” HN - .404” - H64 - EPA - US,CA
965 96 03-01
965 96 04-24
965 96 07-01
965 96 07-42
*!3J1I8D-abjehe!
*!3J1I8D-abjfgg!
*!3J1I8D-aeibcc!
14
*!3J1I8D-afbecj!
395XP
Cylinder displacement: 93.6 cm³/5.7 cu.inch.
Power (CE): 4.9 kW/6.6 hp. Fuel tank volume: 0.9l/1.9 US pint.
Oil tank volume: 0.5l/1.1 US pint. Chain pitch: 3/8 / .404".
28” RSN - 3/8” - H42 - CE - Europe
965 90 21-01
965 90 21-48
*!3J1I8D-afagbd!
18” HN - 3/8” - H42 - CE - Europe
965 90 21-18
965 90 21-88
*!3J1I8D-afaggi!
20” - 3/8” - H42 - CE - Europe
20” HN - 3/8” - H42 - CE - Europe
Engine Hard wood markets
965 90 21-20
965 90 21-90
965 90 24-01
*!3J1I8D-affdae!
*!3J1I8D-afaghf!
*!3J1I8D-agefae!
18” RSN - 3/8” - H42 - CE - Europe
24” HN - 3/8” - H42 - CE - Europe
24” HN - .404” - H64 - Hard wood markets
965 90 21-38
965 90 21-94
965 90 24-24
*!3J1I8D-afagca!
· Vibration-dampened carburettor
*!3J1I8D-afagfb!
18” - 3/8” - H42 - CE - Europe
*!3J1I8D-ageefa!
· Air Injection
· LowVib
*!3J1I8D-afagic!
*!3J1I8D-agefec!
20” RSN - 3/8” - H42 - CE - Europe
28” HN - 3/8” - H42 - CE - Europe
965 90 21-40
965 90 21-98
965 90 24-28
965 90 24-36
*!3J1I8D-afagdh!
*!3J1I8D-afagjj!
*!3J1I8D-ageffj!
*!3J1I8D-agefgg!
24” RSN - 3/8” - H42 - CE - Europe
Horizont - CE - Horizont sawmill
965 90 21-44
965 90 29-01
965 90 24-30
965 90 24-42
*!3J1I8D-afagee!
*!3J1I8D-ageifg!
*!3J1I8D-ahadid!
15
*!3J1I8D-agefhd!
395XPG
Fuel tank volume: 0.9l/1.9 US pint. Oil tank volume: 0.5l/1.1 US pint.
Chain pitch: 3/8 / .404". Recommended bar length: 45-90 cm/18-36".
Sound level: 102 dB(A). Noise emissions, L WA: 115 dB(A).
Vibrations, front/rear handle: 6.5 m/s²/10.2 m/s².
Weight excl. cutting equipment: 8.1 kg/17.8 lbs.
Engine - CE - Europe,RU
20” RSN - 3/8” - H42 - CE - Europe,RU
965 90 26-01
965 90 26-40
*!3J1I8D-agefia!
24” RSN - 3/8” - H42 - CE - Europe,RU
965 90 26-18
965 90 26-44
*!3J1I8D-afbafe!
20” - 3/8” - H42 - CE - Europe,RU
28” RSN - 3/8” - H42 - CE - Europe,RU
20” HN - 3/8” - H42 - CE - Europe,RU
965 90 26-20
965 90 26-48
965 90 26-90
*!3J1I8D-affcji!
· Heated handles
*!3J1I8D-afbaeh!
18” - 3/8” - H42 - CE - Europe,RU
*!3J1I8D-agefjh!
· Air Injection
· LowVib
*!3J1I8D-afbagb!
*!3J1I8D-afbaif!
18” RSN - 3/8” - H42 - CE - Europe,RU
18” HN - 3/8” - H42 - CE - Europe,RU
24” HN - 3/8” - H42 - CE - Europe,RU
28” HN - 3/8” - H42 - CE - Europe,RU
965 90 26-38
965 90 26-88
965 90 26-94
965 90 26-98
*!3J1I8D-afbada!
*!3J1I8D-afbahi!
*!3J1I8D-afbajc!
*!3J1I8D-afbbai!
390XP
Cylinder displacement: 88 cm³/5.4 cu.inch. Power: 4.8 kW/6.5 hp.
Chain pitch: 3/8". Recommended bar length: 45-70 cm/18-28".
Sound level: 107.5 dB(A). Noise emissions, L WA: 117 dB(A).
· Air Injection
· LowVib
18" RSN - 3/8 - H42 - CE - Europe, others
965 06 06-98
*!3J1I8D-beeded!
965 06 06-38
*!3J1I8D-beebgj!
Engine - CE - Europe, others
965 06 14-01
965 06 06-40
*!3J1I8D-bdbgbj!
*!3J1I8D-beebhg!
18" SN - 3/8 - H42 - CE - Europe, others
20" HN - 3/8 - H42 - CE - Europe, others
965 06 06-18
965 06 06-44
965 06 06-90
*!3J1I8D-bdbhje!
*!3J1I8D-beebid!
*!3J1I8D-beedcj!
20" SN - 3/8 - H42 - CE - Europe, others
24" HN - 3/8 - H42 - CE - Europe, others
965 06 06-20
965 06 06-48
965 06 06-94
*!3J1I8D-beebfc!
*!3J1I8D-beebja!
*!3J1I8D-beeddg!
16
· Chain tensioning from the side
390XPG
Sound level: 107.5 dB(A). Noise emissions, L WA: 117 dB(A).
20" RSN -3/8 - H42- CE - Europe, others
965 06 14-01
965 06 14-40
*!3J1I8D-bdbgbj!
*!3J1I8D-beecjj!
18" SN -3/8 - H42- CE - Europe, others
965 06 14-18
965 06 14-44
*!3J1I8D-beechf!
*!3J1I8D-beedaf!
20" SN -3/8 - H42- CE - Europe, others
965 06 14-20
965 06 14-48
*!3J1I8D-beecic!
· Air Injection
· LowVib
*!3J1I8D-beedbc!
17
· Heated handles
· Heated carburettor
385XP
18” - 3/8” - H42 - EPA - US
965 83 01-01
965 83 02-18
*!3J1I8D-agddcd!
· Heavy duty air filter
*!3J1I8D-agdeeg!
18” - 3/8” - H42 - CE - Europe
20” - 3/8” - H42 - EPA - US
965 83 01-18
965 83 02-20
*!3J1I8D-agddda!
· Air Injection
· LowVib
*!3J1I8D-agdefd!
20” - 3/8” - H42 - CE - Europe
18” RSN - 3/8” - H42 - EPA - US
20” - 3/8” - H42 - EPA - US
18” - 3/8” - H42 - EPA - CA
965 83 01-20
965 83 02-38
965 83 03-20
965 83 04-18
*!3J1I8D-agddeh!
*!3J1I8D-agdega!
*!3J1I8D-ageaaj!
*!3J1I8D-agdffc!
18” RSN - 3/8” - H42 - CE - Europe
20” RSN - 3/8” - H42 - EPA - US
18” RSN - 3/8” - H42 - EPA - US
20” - 3/8” - H42 - EPA - CA
965 83 01-38
965 83 02-40
965 83 03-38
965 83 04-20
*!3J1I8D-agddfe!
*!3J1I8D-agdehh!
*!3J1I8D-ageabg!
*!3J1I8D-agdfgj!
20” RSN - 3/8” - H42 - CE - Europe
24” RSN - 3/8” - H42 - EPA - US
20” RSN - 3/8” - H42 - EPA - US
18” RSN - 3/8” - H42 - EPA - CA
965 83 01-40
965 83 02-44
965 83 03-40
965 83 04-38
*!3J1I8D-agddgb!
*!3J1I8D-agdeie!
*!3J1I8D-ageacd!
*!3J1I8D-agdfhg!
24” RSN - 3/8” - H42 - CE - Europe
28” RSN - 3/8” - H42 - EPA - US
24” RSN - 3/8” - H42 - EPA - US
20” RSN - 3/8” - H42 - EPA - CA
965 83 01-44
965 83 02-48
965 83 03-44
965 83 04-40
*!3J1I8D-agddhi!
*!3J1I8D-agdejb!
*!3J1I8D-ageada!
*!3J1I8D-agdfid!
28” RSN - 3/8” - H42 - CE - Europe
18” HN - 3/8” - H42 - EPA - US
28” RSN - 3/8” - H42 - EPA - US
24” RSN - 3/8” - H42 - EPA - CA
965 83 01-48
965 83 02-88
965 83 03-48
965 83 04-44
*!3J1I8D-agddif!
*!3J1I8D-agdfah!
*!3J1I8D-ageaeh!
*!3J1I8D-agdfja!
18” HN - 3/8” - H42 - CE - Europe
20” HN - 3/8” - H42 - EPA - US
18” HN - 3/8” - H42 - EPA - US
28” RSN - 3/8” - H42 - EPA - CA
965 83 01-88
965 83 02-90
965 83 03-88
965 83 04-48
*!3J1I8D-agddjc!
*!3J1I8D-agdfbe!
*!3J1I8D-ageafe!
*!3J1I8D-agdgag!
20” HN - 3/8” - H42 - CE - Europe
24” HN - 3/8” - H42 - EPA - US
20” HN - 3/8” - H42 - EPA - US
18” HN - 3/8” - H42 - EPA - CA
965 83 01-90
965 83 02-94
965 83 03-90
965 83 04-88
*!3J1I8D-agdeai!
*!3J1I8D-agdfcb!
*!3J1I8D-ageagb!
*!3J1I8D-agdgbd!
24” HN - 3/8” - H42 - CE - Europe
28” HN - 3/8” - H42 - EPA - US
24” HN - 3/8” - H42 - EPA - US
20” HN - 3/8” - H42 - EPA - CA
965 83 01-94
965 83 02-98
965 83 03-94
965 83 04-90
*!3J1I8D-agdebf!
*!3J1I8D-agdfdi!
*!3J1I8D-ageahi!
*!3J1I8D-agdgca!
28” HN - 3/8” - H42 - CE - Europe
Engine - EPA - US
28” HN - 3/8” - H42 - EPA - US
24” HN - 3/8” - H42 - EPA - CA
965 83 01-98
965 83 03-01
965 83 03-98
965 83 04-94
*!3J1I8D-agdecc!
*!3J1I8D-agdjij!
*!3J1I8D-ageaif!
*!3J1I8D-agdgdh!
Engine - EPA - US
18” - 3/8” - H42 - EPA - US
Engine - EPA - CA
28” HN - 3/8” - H42 - EPA - CA
965 83 02-01
965 83 03-18
965 83 04-01
965 83 04-98
*!3J1I8D-agdedj!
*!3J1I8D-agdjjg!
*!3J1I8D-agdfef!
18
*!3J1I8D-agdgee!
Engine - EPA - CA
Engine - - others
Engine - AS - AU,NZ
Engine - CE - Southern Europe
965 83 05-01
965 83 06-01
965 83 07-01
965 83 08-01
*!3J1I8D-ageajc!
*!3J1I8D-agdgfb!
*!3J1I8D-agecah!
*!3J1I8D-agdhgh!
18” - 3/8” - H42 - EPA - CA
18” - 3/8” - H42 - - others
18” - 3/8” - H42 - AS - AU,NZ
18” - 3/8” - H42 - CE - Southern Europe
965 83 05-18
965 83 06-18
965 83 07-18
965 83 08-18
*!3J1I8D-agebai!
*!3J1I8D-agdggi!
*!3J1I8D-agecbe!
*!3J1I8D-agdhhe!
20” - 3/8” - H42 - EPA - CA
20” - 3/8” - H42 - - others
20” - 3/8” - H42 - AS - AU,NZ
965 83 05-20
965 83 06-20
965 83 07-20
965 83 08-20
*!3J1I8D-agebbf!
*!3J1I8D-agdghf!
*!3J1I8D-ageccb!
*!3J1I8D-agdhib!
18” RSN - 3/8” - H42 - EPA - CA
18” RSN - 3/8” - H42 - - others
18” RSN - 3/8” - H42 - AS - AU,NZ
18” RSN - 3/8” - H42 - CE - Southern Europe
965 83 05-38
965 83 06-38
965 83 07-38
965 83 08-38
*!3J1I8D-agebcc!
*!3J1I8D-agdgic!
*!3J1I8D-agecdi!
*!3J1I8D-agdhji!
20” RSN - 3/8” - H42 - EPA - CA
20” RSN - 3/8” - H42 - - others
20” RSN - 3/8” - H42 - AS - AU,NZ
965 83 05-40
965 83 06-40
965 83 07-40
965 83 08-40
*!3J1I8D-agebdj!
*!3J1I8D-agdgjj!
*!3J1I8D-agecef!
*!3J1I8D-agdiae!
24” RSN - 3/8” - H42 - EPA - CA
24” RSN - 3/8” - H42 - - others
24” RSN - 3/8” - H42 - AS - AU,NZ
965 83 05-44
965 83 06-44
965 83 07-44
965 83 08-44
*!3J1I8D-agebeg!
*!3J1I8D-agdhaf!
*!3J1I8D-agecfc!
*!3J1I8D-agdibb!
28” RSN - 3/8” - H42 - EPA - CA
28” RSN - 3/8” - H42 - - others
28” RSN - 3/8” - H42 - AS - AU,NZ
965 83 05-48
965 83 06-48
965 83 07-48
965 83 08-48
*!3J1I8D-agebfd!
*!3J1I8D-agdhbc!
*!3J1I8D-agecgj!
*!3J1I8D-agdici!
18” HN - 3/8” - H42 - EPA - CA
18” HN - 3/8” - H42 - - others
18” HN - 3/8” - H42 - AS - AU,NZ
18” HN - 3/8” - H42 - CE - Southern Europe
965 83 05-88
965 83 06-88
965 83 07-88
965 83 08-88
*!3J1I8D-agebga!
*!3J1I8D-agdhcj!
*!3J1I8D-agechg!
*!3J1I8D-agdidf!
20” HN - 3/8” - H42 - EPA - CA
20” HN - 3/8” - H42 - - others
20” HN - 3/8” - H42 - AS - AU,NZ
965 83 05-90
965 83 06-90
965 83 07-90
965 83 08-90
*!3J1I8D-agebhh!
*!3J1I8D-agdhdg!
*!3J1I8D-agecid!
*!3J1I8D-agdiec!
24” HN - 3/8” - H42 - EPA - CA
24” HN - 3/8” - H42 - - others
24” HN - 3/8” - H42 - AS - AU,NZ
965 83 05-94
965 83 06-94
965 83 07-94
965 83 08-94
*!3J1I8D-agebie!
*!3J1I8D-agdhed!
*!3J1I8D-agecja!
*!3J1I8D-agdifj!
28” HN - 3/8” - H42 - EPA - CA
28” HN - 3/8” - H42 - - others
28” HN - 3/8” - H42 - AS - AU,NZ
965 83 05-98
965 83 06-98
965 83 07-98
965 83 08-98
*!3J1I8D-agebjb!
*!3J1I8D-agdhfa!
*!3J1I8D-agedag!
19
*!3J1I8D-agdigg!
385XPG
18” HN - 3/8” - H42 - CE - Europe
965 83 11-01
965 83 11-88
*!3J1I8D-agedca!
20” HN - 3/8” - H42 - CE - Europe
965 83 11-18
965 83 11-90
*!3J1I8D-ageecj!
20” - 3/8” - H42 - CE - Europe
24” HN - 3/8” - H42 - CE - Europe
18” RSN - 3/8” - H42 - EPA - CA, US
965 83 11-20
965 83 11-94
965 83 12-38
*!3J1I8D-agedee!
*!3J1I8D-ageedg!
*!3J1I8D-agdjad!
18” RSN - 3/8” - H42 - CE - Europe
28” HN - 3/8” - H42 - CE - Europe
20” RSN - 3/8” - H42 - EPA - CA, US
965 83 11-38
965 83 11-98
965 83 12-40
*!3J1I8D-agedfb!
· Heated handles
*!3J1I8D-ageebc!
18” - 3/8” - H42 - CE - Europe
*!3J1I8D-ageddh!
· Air Injection
· LowVib
*!3J1I8D-ageeed!
*!3J1I8D-agdjba!
20” RSN - 3/8” - H42 - CE - Europe
Engine - EPA - CA, US
24” RSN - 3/8” - H42 - EPA - CA, US
20” HN - 3/8” - H42 - EPA - CA, US
965 83 11-40
965 83 12-01
965 83 12-44
965 83 12-90
*!3J1I8D-agedgi!
*!3J1I8D-agdihd!
*!3J1I8D-agdjch!
*!3J1I8D-agdjfi!
24” RSN - 3/8” - H42 - CE - Europe
18” - 3/8” - H42 - EPA - CA, US
28” RSN - 3/8” - H42 - EPA - CA, US
24” HN - 3/8” - H42 - EPA - CA, US
965 83 11-44
965 83 12-18
965 83 12-48
965 83 12-94
*!3J1I8D-agedhf!
*!3J1I8D-agdiia!
*!3J1I8D-agdjde!
*!3J1I8D-agdjgf!
28” RSN - 3/8” - H42 - CE - Europe
20” - 3/8” - H42 - EPA - CA, US
18” HN - 3/8” - H42 - EPA - CA, US
28” HN - 3/8” - H42 - EPA - CA, US
965 83 11-48
965 83 12-20
965 83 12-88
965 83 12-98
*!3J1I8D-agedic!
*!3J1I8D-agdijh!
*!3J1I8D-agdjeb!
20
*!3J1I8D-agdjhc!
372XP
Oil tank volume: 0.40l/0.84 US pint. Chain pitch: 3/8".
28” HN - 3/8” - H42 - CE - Europe
965 70 21-01
965 70 21-98
*!3J1I8D-aeidjj!
· Quick release on air filter
*!3J1I8D-aeiehe!
15” - 3/8” - H42 - CE - Europe
Engine - AS - AU,NZ
965 70 21-15
965 70 22-01
*!3J1I8D-afbedg!
· Air Injection
· LowVib
*!3J1I8D-aeieib!
16” - 3/8” - H42 - CE - Europe
15” - 3/8” - H42 - AS - AU,NZ
24” HN - 3/8” - H42 - AS - AU,NZ
28” RSN - 3/8” - H42 - EPA - US,CA
965 70 21-16
965 70 22-15
965 70 22-94
965 70 23-48
*!3J1I8D-agcdac!
*!3J1I8D-aeieji!
*!3J1I8D-aeifia!
*!3J1I8D-agcdfh!
18” - 3/8” - H42 - CE - Europe
16” - 3/8” - H42 - AS - AU,NZ
28” HN - 3/8” - H42 - AS - AU,NZ
18” HN - 3/8” - H42 - EPA - US,CA
965 70 21-18
965 70 22-16
965 70 22-98
965 70 23-88
*!3J1I8D-aehiae!
*!3J1I8D-aeifae!
*!3J1I8D-agcecf!
*!3J1I8D-aeiggf!
20” - 3/8” - H42 - CE - Europe
18” - 3/8” - H42 - AS - AU,NZ
20” HN - 3/8” - H42 - EPA - US,CA
965 70 21-20
965 70 22-18
965 70 23-01
965 70 23-90
*!3J1I8D-aeieaf!
*!3J1I8D-aeifbb!
*!3J1I8D-aeifjh!
*!3J1I8D-aeighc!
18” RSN - 3/8” - H42 - CE - Europe
20” - 3/8” - H42 - AS - AU,NZ
15” - 3/8” - H42 - EPA - US,CA
24” HN - 3/8” - H42 - EPA - US,CA
965 70 21-38
965 70 22-20
965 70 23-15
965 70 23-94
*!3J1I8D-aeiebc!
*!3J1I8D-aeifci!
*!3J1I8D-aeigad!
*!3J1I8D-aeigij!
20” RSN - 3/8” - H42 - CE - Europe
18” RSN - 3/8” - H42 - AS - AU,NZ
16” - 3/8” - H42 - EPA - US,CA
28” HN - 3/8” - H42 - EPA - US,CA
965 70 21-40
965 70 22-38
965 70 23-16
965 70 23-98
*!3J1I8D-aeiecj!
*!3J1I8D-aeifdf!
*!3J1I8D-aeigba!
*!3J1I8D-agcdge!
24” RSN - 3/8” - H42 - CE - Europe
20” RSN - 3/8” - H42 - AS - AU,NZ
18” - 3/8” - H42 - EPA - US,CA
Engine - EPA - CA
965 70 21-44
965 70 22-40
965 70 23-18
965 70 24-01
*!3J1I8D-aeiedg!
*!3J1I8D-aeifec!
*!3J1I8D-aeigch!
*!3J1I8D-aeigjg!
28” RSN - 3/8” - H42 - CE - Europe
24” RSN - 3/8” - H42 - AS - AU,NZ
20” - 3/8” - H42 - EPA - US,CA
15” - 3/8” - H42 - EPA - CA
965 70 21-48
965 70 22-44
965 70 23-20
965 70 24-15
*!3J1I8D-agcdbj!
*!3J1I8D-aeiffj!
*!3J1I8D-aeigde!
*!3J1I8D-aeihac!
18” HN - 3/8” - H42 - CE - Europe
28” RSN - 3/8” - H42 - AS - AU,NZ
18” RSN - 3/8” - H42 - EPA - US,CA
16” - 3/8” - H42 - EPA - CA
965 70 21-88
965 70 22-48
965 70 23-38
965 70 24-16
*!3J1I8D-aeieed!
*!3J1I8D-agcebi!
*!3J1I8D-aeigeb!
*!3J1I8D-aeihbj!
20” HN - 3/8” - H42 - CE - Europe
18” HN - 3/8” - H42 - AS - AU,NZ
20” RSN - 3/8” - H42 - EPA - US,CA
18” - 3/8” - H42 - EPA - CA
965 70 21-90
965 70 22-88
965 70 23-40
965 70 24-18
*!3J1I8D-aeiefa!
*!3J1I8D-aeifgg!
*!3J1I8D-agcdea!
*!3J1I8D-aeihcg!
24” HN - 3/8” - H42 - CE - Europe
20” HN - 3/8” - H42 - AS - AU,NZ
24” RSN - 3/8” - H42 - EPA - US,CA
20” - 3/8” - H42 - EPA - CA
965 70 21-94
965 70 22-90
965 70 23-44
965 70 24-20
*!3J1I8D-aeiegh!
*!3J1I8D-aeifhd!
*!3J1I8D-aeigfi!
21
*!3J1I8D-aeihdd!
18” RSN - 3/8” - H42 - EPA - CA
18” RSN - 3/8” - H42 - EPA - CA
18” RSN - 3/8” - H42 - - hard wood markets
18” RSN - 3/8” - H42 - EPA - US
965 70 24-38
965 70 25-38
965 70 26-38
965 70 27-38
*!3J1I8D-aeihea!
*!3J1I8D-aeiiha!
*!3J1I8D-aeijig!
*!3J1I8D-aejbcj!
20” RSN - 3/8” - H42 - EPA - CA
20” RSN - 3/8” - H42 - EPA - CA
20” RSN - 3/8” - H42 - EPA - US
965 70 24-40
965 70 25-40
965 70 26-40
965 70 27-40
*!3J1I8D-aeihfh!
*!3J1I8D-aeiiih!
*!3J1I8D-aeijjd!
*!3J1I8D-aejbdg!
24” RSN - 3/8” - H42 - EPA - CA
24” RSN - 3/8” - H42 - EPA - CA
24” RSN - 3/8” - H42 - EPA - US
965 70 24-44
965 70 25-44
965 70 26-44
965 70 27-44
*!3J1I8D-aeihge!
*!3J1I8D-aeiije!
*!3J1I8D-aejaag!
*!3J1I8D-aejbed!
28” RSN - 3/8” - H42 - EPA - CA
28” RSN - 3/8” - H42 - EPA - CA
28” RSN - 3/8” - H42 - EPA - US
965 70 24-48
965 70 25-48
965 70 26-48
965 70 27-48
*!3J1I8D-agcefg!
*!3J1I8D-agcdhb!
*!3J1I8D-aejabd!
*!3J1I8D-agceje!
18” HN - 3/8” - H42 - EPA - CA
18” HN - 3/8” - H42 - EPA - CA
18” HN - 3/8” - H42 - - hard wood markets
18” HN - 3/8” - H42 - EPA - US
965 70 24-88
965 70 25-88
965 70 26-88
965 70 27-88
*!3J1I8D-aeihhb!
*!3J1I8D-aeijaa!
*!3J1I8D-aejaca!
*!3J1I8D-aejbfa!
20” HN - 3/8” - H42 - EPA - CA
20” HN - 3/8” - H42 - EPA - CA
20” HN - 3/8” - H42 - EPA - US
965 70 24-90
965 70 25-90
965 70 26-90
965 70 27-90
*!3J1I8D-aeihii!
*!3J1I8D-aeijbh!
*!3J1I8D-aejadh!
*!3J1I8D-aejbgh!
24” HN - 3/8” - H42 - EPA - CA
24” HN - 3/8” - H42 - EPA - CA
24” HN - 3/8” - H42 - EPA - US
965 70 24-94
965 70 25-94
965 70 26-94
965 70 27-94
*!3J1I8D-aeihjf!
*!3J1I8D-aeijce!
*!3J1I8D-aejaee!
*!3J1I8D-aejbhe!
28” HN - 3/8” - H42 - EPA - CA
28” HN - 3/8” - H42 - EPA - CA
28” HN - 3/8” - H42 - EPA - US
965 70 24-98
965 70 25-98
965 70 26-98
965 70 27-98
*!3J1I8D-agcegd!
*!3J1I8D-agcdii!
*!3J1I8D-aejafb!
*!3J1I8D-agcfaa!
Engine - EPA - CA
Engine - EPA - US
Engine - CE - Southern Europe
965 70 25-01
965 70 26-01
965 70 27-01
965 70 28-01
*!3J1I8D-aeiicf!
*!3J1I8D-aeijdb!
*!3J1I8D-aejahf!
*!3J1I8D-aejbib!
15” - 3/8” - H42 - EPA - CA
15” - 3/8” - H42 - - hard wood markets
15” - 3/8” - H42 - EPA - US
965 70 25-15
965 70 26-15
965 70 27-15
965 70 28-15
*!3J1I8D-aeiidc!
*!3J1I8D-aeijei!
*!3J1I8D-aejaic!
*!3J1I8D-aejbji!
16” - 3/8” - H42 - EPA - CA
16” - 3/8” - H42 - EPA - US
965 70 25-16
965 70 26-16
965 70 27-16
965 70 28-16
*!3J1I8D-aeiiej!
*!3J1I8D-aeijff!
*!3J1I8D-aejajj!
*!3J1I8D-aejcae!
18” - 3/8” - H42 - EPA - CA
18” - 3/8” - H42 - EPA - US
965 70 25-18
965 70 26-18
965 70 27-18
965 70 28-18
*!3J1I8D-aeiifg!
*!3J1I8D-aeijgc!
*!3J1I8D-aejbaf!
*!3J1I8D-aejcbb!
20” - 3/8” - H42 - EPA - CA
20” - 3/8” - H42 - EPA - US
965 70 25-20
965 70 26-20
965 70 27-20
965 70 28-20
*!3J1I8D-aeiigd!
*!3J1I8D-aeijhj!
*!3J1I8D-aejbbc!
22
*!3J1I8D-aejcci!
372XPG
Noise emissions, L WA: 115 dB(A). Vibrations, front/rear handle: 3,5 m/
s²/4,0 m/s². Weight excl. cutting equipment: 6.3 kg/13.8 lbs.
24” HN - 3/8” - H42 - CE - Europe
965 70 31-01
965 70 31-94
*!3J1I8D-aejcjh!
28” HN - 3/8” - H42 - CE - Europe
965 70 31-15
965 70 31-98
*!3J1I8D-agcddd!
16” - 3/8” - H42 - CE - Europe
Engine - EPA - CA
18” HN - 3/8” - H42 - EPA - CA
965 70 31-16
965 70 32-01
965 70 32-88
*!3J1I8D-aejdba!
· Heated handles
*!3J1I8D-aejdjg!
15” - 3/8” - H42 - CE - Europe
*!3J1I8D-aejdad!
· Air Injection
· LowVib
*!3J1I8D-aejeac!
*!3J1I8D-aejeii!
18” - 3/8” - H42 - CE - Europe
15” - 3/8” - H42 - EPA - CA
20” HN - 3/8” - H42 - EPA - CA
18” RSN - 3/8” - H42 - EPA - US
965 70 31-18
965 70 32-15
965 70 32-90
965 70 33-38
*!3J1I8D-aejdch!
*!3J1I8D-aejebj!
*!3J1I8D-aejejf!
*!3J1I8D-aejfgd!
20” - 3/8” - H42 - CE - Europe
16” - 3/8” - H42 - EPA - CA
24” HN - 3/8” - H42 - EPA - CA
20” RSN - 3/8” - H42 - EPA - US
965 70 31-20
965 70 32-16
965 70 32-94
965 70 33-40
*!3J1I8D-aejdde!
*!3J1I8D-aejecg!
*!3J1I8D-aejfab!
*!3J1I8D-aejfha!
18” RSN - 3/8” - H42 - CE - Europe
18” - 3/8” - H42 - EPA - CA
28” HN - 3/8” - H42 - EPA - CA
24” RSN - 3/8” - H42 - EPA - US
965 70 31-38
965 70 32-18
965 70 32-98
965 70 33-44
*!3J1I8D-aejdeb!
*!3J1I8D-aejedd!
*!3J1I8D-agceab!
*!3J1I8D-agcfbh!
20” RSN - 3/8” - H42 - CE - Europe
20” - 3/8” - H42 - EPA - CA
Engine - EPA - US
28” RSN - 3/8” - H42 - EPA - US
965 70 31-40
965 70 32-20
965 70 33-01
965 70 33-48
*!3J1I8D-aejdfi!
*!3J1I8D-aejeea!
*!3J1I8D-aejfbi!
*!3J1I8D-agcfce!
24” RSN - 3/8” - H42 - CE - Europe
18” RSN - 3/8” - H42 - EPA - CA
15” - 3/8” - H42 - EPA - US
18” HN - 3/8” - H42 - EPA - US
965 70 31-44
965 70 32-38
965 70 33-15
965 70 33-88
*!3J1I8D-aejdgf!
*!3J1I8D-aejefh!
*!3J1I8D-aejfcf!
*!3J1I8D-aejfih!
28” RSN - 3/8” - H42 - CE - Europe
20” RSN - 3/8” - H42 - EPA - CA
16” - 3/8” - H42 - EPA - US
20” HN - 3/8” - H42 - EPA - US
965 70 31-48
965 70 32-40
965 70 33-16
965 70 33-90
*!3J1I8D-agcdcg!
*!3J1I8D-aejege!
*!3J1I8D-aejfdc!
*!3J1I8D-aejfje!
18” HN - 3/8” - H42 - CE - Europe
24” RSN - 3/8” - H42 - EPA - CA
18” - 3/8” - H42 - EPA - US
24” HN - 3/8” - H42 - EPA - US
965 70 31-88
965 70 32-44
965 70 33-18
965 70 33-94
*!3J1I8D-aejdhc!
*!3J1I8D-aejehb!
*!3J1I8D-aejfej!
*!3J1I8D-aejgaa!
20” HN - 3/8” - H42 - CE - Europe
28” RSN - 3/8” - H42 - EPA - CA
20” - 3/8” - H42 - EPA - US
28” HN - 3/8” - H42 - EPA - US
965 70 31-90
965 70 32-48
965 70 33-20
965 70 33-98
*!3J1I8D-aejdij!
*!3J1I8D-agcdjf!
*!3J1I8D-aejffg!
23
*!3J1I8D-agcfdb!
575XP
20” HN - 3/8” - H42 - CE - Europe
965 76 01-01
965 76 01-90
*!3J1I8D-bddfgj!
24” HN - 3/8” - H42 - CE - Europe
965 76 01-15
965 76 01-94
*!3J1I8D-bddfdi!
16” SN - 3/8” - H42 - CE - Europe
28” HN - 3/8” - H42 - CE - Europe
965 76 01-16
965 76 01-98
965 76 03-01
*!3J1I8D-bddeeg!
· Assymetrical rear handle
*!3J1I8D-bddfcb!
15” SN - 3/8” - H42 - CE - Europe
*!3J1I8D-bddedj!
· Air Injection
· LowVib
· X-TORQ engine
· E-TECH II
· Combined choke / stop control
*!3J1I8D-bddfef!
*!3J1I8D-bddhgh!
18” SN - 3/8” - H42 - CE - Europe
20” RSN - 3/8” - H42 - CE - EPA, CA
965 76 01-18
965 76 02-01
965 76 04-01
965 76 11-40
*!3J1I8D-bddefd!
*!3J1I8D-bcjgda!
*!3J1I8D-bcjghi!
*!3J1I8D-bddgic!
20” SN - 3/8” - H42 - CE - Europe
18" SN - 3/8” - H42 - EPA - CA, US
Engine - CE - EPA, CA
24” RSN - 3/8” - H42 - CE - EPA, CA
965 76 01-20
965 76 02-18
965 76 11-01
965 76 11-44
*!3J1I8D-bddega!
*!3J1I8D-bddfhg!
*!3J1I8D-bcjggb!
*!3J1I8D-bddgjj!
18” RSN - 3/8” - H42 - CE - Europe
20" SN - 3/8” - H42 - EPA - CA, US
15” SN - 3/8” - H42 - CE - EPA, CA
28” RSN - 3/8” - H42 - CE - EPA, CA
965 76 01-38
965 76 02-20
965 76 11-15
965 76 11-48
*!3J1I8D-bddehh!
*!3J1I8D-bddfid!
*!3J1I8D-bddgdh!
*!3J1I8D-bddhaf!
20” RSN - 3/8” - H42 - CE - Europe
22" RSN - 3/8” - H42 - EPA - CA, US
16” SN - 3/8” - H42 - CE - EPA, CA
18” HN - 3/8” - H42 - CE - EPA, CA
965 76 01-40
965 76 02-22
965 76 11-16
965 76 11-88
*!3J1I8D-bddeie!
*!3J1I8D-bddici!
*!3J1I8D-bddgee!
*!3J1I8D-bddhbc!
24” RSN - 3/8” - H42 - CE - Europe
18" RSN - 3/8” - H42 - EPA - CA, US
18” SN - 3/8” - H42 - CE - EPA, CA
20” HN - 3/8” - H42 - CE - EPA, CA
965 76 01-44
965 76 02-38
965 76 11-18
965 76 11-90
*!3J1I8D-bddejb!
*!3J1I8D-bddfja!
*!3J1I8D-bddgfb!
*!3J1I8D-bddhcj!
28” RSN - 3/8” - H42 - CE - Europe
20" RSN - 3/8” - H42 - EPA - CA, US
20” SN - 3/8” - H42 - CE - EPA, CA
24” HN - 3/8” - H42 - CE - EPA, CA
965 76 01-48
965 76 02-40
965 76 11-20
965 76 11-94
*!3J1I8D-bddfah!
*!3J1I8D-bddgag!
*!3J1I8D-bddggi!
*!3J1I8D-bddhdg!
18” HN - 3/8” - H42 - CE - Europe
24" RSN - 3/8” - H42 - EPA - CA, US
18” RSN - 3/8” - H42 - CE - EPA, CA
28” HN - 3/8” - H42 - CE - EPA, CA
965 76 01-88
965 76 02-44
965 76 11-38
965 76 11-98
*!3J1I8D-bddfbe!
*!3J1I8D-bddgbd!
*!3J1I8D-bddghf!
24
*!3J1I8D-bddhed!
575XPG
Engine - CE - EPA, USA, CA
18" - RSN - 3/8 - H42 - CE - EPA, USA, CA
965 76 11-01
965 76 11-38
*!3J1I8D-bcjggb!
*!3J1I8D-bddghf!
15" - 3/8 - H42 - CE - EPA, USA, CA
20" - RSN - 3/8 - H42 - CE - EPA, USA, CA
965 76 11-15
965 76 11-40
*!3J1I8D-bddgdh!
· Air Injection
· LowVib
· X-TORQ engine
· E-TECH II
*!3J1I8D-bddgic!
16" - 3/8 - H42 - CE - EPA, USA, CA
24" - RSN - 3/8 - H42 - CE - EPA, USA, CA
20" - HN - 3/8 - H42 - CE - EPA, USA, CA
965 76 11-16
965 76 11-44
965 76 11-90
*!3J1I8D-bddgee!
*!3J1I8D-bddgjj!
*!3J1I8D-bddhcj!
18" - 3/8 - H42 - CE - EPA, USA, CA
28" - RSN - 3/8 - H42 - CE - EPA, USA, CA
24" - HN - 3/8 - H42 - CE - EPA, USA, CA
965 76 11-18
965 76 11-48
965 76 11-94
*!3J1I8D-bddgfb!
*!3J1I8D-bddhaf!
*!3J1I8D-bddhdg!
20" - 3/8 - H42 - CE - EPA, USA, CA
18" - HN - 3/8 - H42 - CE - EPA, USA, CA
28" - HN - 3/8 - H42 - CE - EPA, USA, CA
965 76 11-20
965 76 11-88
965 76 11-98
*!3J1I8D-bddggi!
*!3J1I8D-bddhbc!
*!3J1I8D-bddhed!
25
· Heated handles
365
Recommended bar length: 38-70 cm/15-28". Sound level: 102.5 dB(A).
28” HN - 3/8” - H42 - CE - Europe
967 08 21-01
967 08 21-98
*!3J1I8D-afaafh!
*!3J1I8D-afabdc!
15” - 3/8” - H42 - CE - Europe
Engine - AS - AU,NZ
967 08 21-15
967 08 22-01
*!3J1I8D-afaage!
· Air Injection
· LowVib
*!3J1I8D-afabej!
16” - 3/8” - H42 - CE - Europe
15” - 3/8” - H42 - AS - AU,NZ
24” HN - 3/8” - H42 - AS - AU,NZ
28” RSN - 3/8” - H42 - EPA - US,CA
967 08 21-16
967 08 22-15
967 08 22-94
967 08 23-48
*!3J1I8D-afaahb!
*!3J1I8D-afabfg!
*!3J1I8D-agccba!
*!3J1I8D-agcbbb!
18” - 3/8” - H42 - CE - Europe
16” - 3/8” - H42 - AS - AU,NZ
28” HN - 3/8” - H42 - AS - AU,NZ
18” HN - 3/8” - H42 - EPA - US,CA
967 08 21-18
967 08 22-16
967 08 22-98
967 08 23-88
*!3J1I8D-afaaii!
*!3J1I8D-afabgd!
*!3J1I8D-agccch!
*!3J1I8D-afadaj!
20” - 3/8” - H42 - CE - Europe
18” - 3/8” - H42 - AS - AU,NZ
20” HN - 3/8” - H42 - EPA - US,CA
967 08 21-20
967 08 22-18
967 08 23-01
967 08 23-90
*!3J1I8D-afaajf!
*!3J1I8D-afabha!
*!3J1I8D-afacdb!
*!3J1I8D-afadbg!
18” RSN - 3/8” - H42 - CE - Europe
20” - 3/8” - H42 - AS - AU,NZ
15” - 3/8” - H42 - EPA - US,CA
24” HN - 3/8” - H42 - EPA - US,CA
967 08 21-38
967 08 22-20
967 08 23-15
967 08 23-94
*!3J1I8D-agcagh!
*!3J1I8D-afabih!
*!3J1I8D-afacei!
*!3J1I8D-agcbci!
20” RSN - 3/8” - H42 - CE - Europe
18” RSN - 3/8” - H42 - AS - AU,NZ
16” - 3/8” - H42 - EPA - US,CA
28” HN - 3/8” - H42 - EPA - US,CA
967 08 21-40
967 08 22-38
967 08 23-16
967 08 23-98
*!3J1I8D-afabab!
*!3J1I8D-afabje!
*!3J1I8D-afacff!
*!3J1I8D-agcbdf!
24” RSN - 3/8” - H42 - CE - Europe
20” RSN - 3/8” - H42 - AS - AU,NZ
18” - 3/8” - H42 - EPA - US,CA
967 08 21-44
967 08 22-40
967 08 23-18
967 08 24-01
*!3J1I8D-agcahe!
*!3J1I8D-afacaa!
*!3J1I8D-afacgc!
*!3J1I8D-afadcd!
28” RSN - 3/8” - H42 - CE - Europe
24” RSN - 3/8” - H42 - AS - AU,NZ
20” - 3/8” - H42 - EPA - US,CA
967 08 21-48
967 08 22-44
967 08 23-20
967 08 24-15
*!3J1I8D-agcaib!
*!3J1I8D-agcbjh!
*!3J1I8D-afachj!
*!3J1I8D-afadda!
18” HN - 3/8” - H42 - CE - Europe
28” RSN - 3/8” - H42 - AS - AU,NZ
18” RSN - 3/8” - H42 - EPA - US,CA
967 08 21-88
967 08 22-48
967 08 23-38
967 08 24-16
*!3J1I8D-afabbi!
*!3J1I8D-agccad!
*!3J1I8D-afacig!
*!3J1I8D-afadeh!
20” HN - 3/8” - H42 - CE - Europe
18” HN - 3/8” - H42 - AS - AU,NZ
20” RSN - 3/8” - H42 - EPA - US,CA
967 08 21-90
967 08 22-88
967 08 23-40
967 08 24-18
*!3J1I8D-afabcf!
*!3J1I8D-afacbh!
*!3J1I8D-afacjd!
*!3J1I8D-afadfe!
24” HN - 3/8” - H42 - CE - Europe
20” HN - 3/8” - H42 - AS - AU,NZ
24” RSN - 3/8” - H42 - EPA - US,CA
967 08 21-94
967 08 22-90
967 08 23-44
967 08 24-20
*!3J1I8D-agcaji!
*!3J1I8D-afacce!
*!3J1I8D-agcbae!
26
*!3J1I8D-afadgb!
18” RSN - 3/8” - H42 - CE - Europe
18” RSN - 3/8” - H42 - EPA - US,CA
18” RSN - 3/8” - H42 - - SA
967 08 24-38
967 08 25-38
967 08 26-38
967 08 27-38
*!3J1I8D-agccde!
*!3J1I8D-agcbec!
*!3J1I8D-agccfi!
*!3J1I8D-ahafgh!
20” RSN - 3/8” - H42 - CE - Europe
20” RSN - 3/8” - H42 - EPA - US,CA
20” RSN - 3/8” - H42 - - SA
967 08 24-40
967 08 25-40
967 08 26-40
967 08 27-40
*!3J1I8D-afadhi!
*!3J1I8D-afafah!
*!3J1I8D-afafid!
*!3J1I8D-ahafhe!
24” RSN - 3/8” - H42 - CE - Europe
24” RSN - 3/8” - H42 - EPA - US,CA
24” RSN - 3/8” - H42 - - SA
967 08 24-44
967 08 25-44
967 08 26-44
967 08 27-44
*!3J1I8D-afadif!
*!3J1I8D-agcbfj!
*!3J1I8D-agccgf!
*!3J1I8D-ahafib!
28” RSN - 3/8” - H42 - CE - Europe
28” RSN - 3/8” - H42 - EPA - US,CA
28” RSN - 3/8” - H42 - - SA
967 08 24-48
967 08 25-48
967 08 26-48
967 08 27-48
*!3J1I8D-agcceb!
*!3J1I8D-agcbgg!
*!3J1I8D-agcchc!
*!3J1I8D-ahafji!
18” HN - 3/8” - H42 - CE - Europe
18” HN - 3/8” - H42 - EPA - US,CA
18” HN - 3/8” - H42 - - SA
967 08 24-88
967 08 25-88
967 08 26-88
967 08 27-88
*!3J1I8D-afadjc!
*!3J1I8D-afafbe!
*!3J1I8D-afafja!
*!3J1I8D-ahagae!
20” HN - 3/8” - H42 - CE - Europe
20” HN - 3/8” - H42 - EPA - US,CA
20” HN - 3/8” - H42 - - SA
967 08 24-90
967 08 25-90
967 08 26-90
967 08 27-90
*!3J1I8D-afaebf!
*!3J1I8D-afafcb!
*!3J1I8D-afagag!
*!3J1I8D-ahagbb!
24” HN - 3/8” - H42 - CE - Europe
24” HN - 3/8” - H42 - EPA - US,CA
24” HN - 3/8” - H42 - - SA
967 08 24-94
967 08 25-94
967 08 26-94
967 08 27-94
*!3J1I8D-afaecc!
*!3J1I8D-agcbhd!
*!3J1I8D-agccij!
*!3J1I8D-ahagci!
28” HN - 3/8” - H42 - CE - Europe
28” HN - 3/8” - H42 - EPA - US,CA
28” HN - 3/8” - H42 - - SA
967 08 24-98
967 08 25-98
967 08 26-98
967 08 27-98
*!3J1I8D-afaedj!
*!3J1I8D-agcbia!
*!3J1I8D-agccjg!
*!3J1I8D-ahagdf!
Engine - - SA
Engine - - Russia
967 08 25-01
967 08 26-01
967 08 27-01
967 08 28-01
*!3J1I8D-afaeeg!
*!3J1I8D-afafdi!
*!3J1I8D-ahafbc!
*!3J1I8D-bdcgaj!
15” - 3/8” - H42 - CE - Europe
15” - 3/8” - H42 - EPA - US,CA
15” - 3/8” - H42 - - SA
15” - 3/8” - H42 - - Russia
967 08 25-15
967 08 26-15
967 08 27-15
967 08 28-15
*!3J1I8D-afaefd!
*!3J1I8D-afafef!
*!3J1I8D-ahafcj!
*!3J1I8D-bdcgbg!
16” - 3/8” - H42 - CE - Europe
16” - 3/8” - H42 - EPA - US,CA
16” - 3/8” - H42 - - SA
16” - 3/8” - H42 - - Russia
967 08 25-16
967 08 26-16
967 08 27-16
967 08 28-16
*!3J1I8D-afaehh!
*!3J1I8D-afaffc!
*!3J1I8D-ahafdg!
*!3J1I8D-bdcgcd!
18” - 3/8” - H42 - CE - Europe
18” - 3/8” - H42 - EPA - US,CA
18” - 3/8” - H42 - - SA
18” - 3/8” - H42 - - Russia
967 08 25-18
967 08 26-18
967 08 27-18
967 08 28-18
*!3J1I8D-afaeie!
*!3J1I8D-afafgj!
*!3J1I8D-ahafed!
*!3J1I8D-bdcgda!
20” - 3/8” - H42 - CE - Europe
20” - 3/8” - H42 - EPA - US,CA
20” - 3/8” - H42 - - SA
20” - 3/8” - H42 - - Russia
967 08 25-20
967 08 26-20
967 08 27-20
967 08 28-20
*!3J1I8D-afaejb!
*!3J1I8D-afafhg!
*!3J1I8D-ahaffa!
27
*!3J1I8D-bdcgeh!
570
Noise emissions, L WA: 115 dB(A). Vibrations, front/rear handle: 3,2 m/
s²/3,4 m/s². Weight excl. cutting equipment: 6.8 kg/14.9 lbs.
Engine - CA, Europe
28"- RSN - 3/8 - H42 - CA, Europe
967 09 11-01
967 09 11-48
*!3J1I8D-bdgade!
18"- HN - 3/8 - H42 - CA, Europe
967 09 11-15
967 09 11-88
*!3J1I8D-befhjb!
16"- SN - 3/8 - H42 - CA, Europe
20"- HN - 3/8 - H42 - CA, Europe
20" - SN - 3/8 - H42 - EPA - US
967 09 11-16
967 09 11-90
967 09 12-20
*!3J1I8D-befhdj!
*!3J1I8D-befiah!
*!3J1I8D-beafib!
18” - SN - 3/8 - H42 - CA, Europe
24"- HN - 3/8 - H42 - CA, Europe
18" - RSN - 3/8 - H42 - EPA - US
967 09 11-18
967 09 11-94
967 09 12-38
*!3J1I8D-bdgaeb!
*!3J1I8D-befibe!
*!3J1I8D-befief!
20"- SN - 3/8 - H42 - CA, Europe
28"- HN - 3/8 - H42 - CA, Europe
20" - RSN - 3/8 - H42 - EPA - US
967 09 11-20
967 09 11-98
967 09 12-40
*!3J1I8D-befheg!
*!3J1I8D-befhie!
15"- SN - 3/8 - H42 - CA, Europe
*!3J1I8D-befhcc!
· Air Injection
· LowVib
· X-TORQ engine
· E-TECH II
*!3J1I8D-beficb!
*!3J1I8D-beagae!
18"- RSN - 3/8 - H42 - CA, Europe
Engine - EPA - US
24" - RSN - 3/8 - H42 - EPA - US
20" - HN - 3/8 - H42 - EPA - US
967 09 11-38
967 09 12-01
967 09 12-44
967 09 12-90
*!3J1I8D-befhfd!
*!3J1I8D-bcjgif!
*!3J1I8D-befifc!
*!3J1I8D-befiid!
20"- RSN - 3/8 - H42 - CA, Europe
15" - SN - 3/8 - H42 - EPA - US
28" - RSN - 3/8 - H42 - EPA - US
24" - HN - 3/8 - H42 - EPA - US
967 09 11-40
967 09 12-15
967 09 12-48
967 09 12-94
*!3J1I8D-befhga!
*!3J1I8D-befidi!
*!3J1I8D-befigj!
*!3J1I8D-befija!
24"- RSN - 3/8 - H42 - CA, Europe
18" - SN - 3/8 - H42 - EPA - US
18" - HN - 3/8 - H42 - EPA - US
28" - HN - 3/8 - H42 - EPA - US
967 09 11-44
967 09 12-19
967 09 12-88
967 09 12-97
*!3J1I8D-befhhh!
*!3J1I8D-befegd!
*!3J1I8D-befihg!
28
*!3J1I8D-befjbd!
359
Oil tank volume: 0.38l/0.80 US pint. Chain pitch: .325 / 3/8".
Engine - CE - Europe,others
20” - .325” - H25 - CE - Europe,others
967 04 11-01
967 04 11-20
*!3J1I8D-agahec!
*!3J1I8D-agahia!
967 04 11-13
967 04 12-01
*!3J1I8D-agahfj!
· Air Injection
· LowVib
*!3J1I8D-agaide!
15” - 3/8” - H42 - CE - Europe,others
16” - 3/8” - H42 - AS - AU,NZ,S-America
967 04 11-15
967 04 12-65
967 04 12-70
967 04 14-66
*!3J1I8D-aficic!
*!3J1I8D-agaijg!
*!3J1I8D-agajbj!
*!3J1I8D-agbaie!
Engine - AS - AU,NZ,S-America
967 04 11-16
967 04 12-66
967 04 14-01
967 04 14-68
*!3J1I8D-agahgg!
*!3J1I8D-agajac!
*!3J1I8D-agbabf!
*!3J1I8D-agbajb!
967 04 11-18
967 04 12-68
967 04 14-65
967 04 14-70
*!3J1I8D-agahhd!
*!3J1I8D-aficjj!
*!3J1I8D-agbahh!
29
*!3J1I8D-agbbah!
359 E-TECH
.325 - CE - Europe, others
3/8 - EPA - US, CA
967 04 16-01
967 04 17-01
*!3J1I8D-ahejaj!
15 - 3/8 - H42 - EPA - US, CA
967 04 16-13
967 04 17-65
*!3J1I8D-ahejhi!
15 - .325 - H25 - CE - Europe, others
16 - 3/8 - H42 - EPA - US, CA
13 .325 H25 US, CA
967 04 16-15
967 04 17-66
967 04 18-13
*!3J1I8D-ahejcd!
*!3J1I8D-ahejif!
*!3J1I8D-aibeea!
18 - 3/8 - H42 - EPA - US, CA
15 .325 H25 US, CA
967 04 16-16
967 04 17-68
967 04 18-15
*!3J1I8D-ahejda!
*!3J1I8D-ahejjc!
*!3J1I8D-aibege!
20 - 3/8 - H42 - EPA - US, CA
16 .325 H25 US, CA
967 04 16-18
967 04 17-70
967 04 18-16
*!3J1I8D-ahejeh!
*!3J1I8D-ahejgb!
*!3J1I8D-ahejbg!
· Air Injection
· LowVib
· E-TECH
*!3J1I8D-ahfaaf!
*!3J1I8D-aibehb!
.325 US,CA
18 .325 H25 US, CA
20 .325 H25 US, CA
967 04 16-20
967 04 18-01
967 04 18-18
967 04 18-20
*!3J1I8D-ahejfe!
*!3J1I8D-aibedd!
*!3J1I8D-aibeii!
30
*!3J1I8D-aibejf!
359G
967 04 21-01
967 04 21-18
*!3J1I8D-agbbbe!
· Heated handles
· Heated carburettor (option)
*!3J1I8D-agbbfc!
967 04 21-13
967 04 21-20
*!3J1I8D-agbbcb!
· Air Injection
· LowVib
*!3J1I8D-agbbgj!
967 04 21-15
967 04 23-01
967 04 23-15
967 04 23-18
*!3J1I8D-agbbdi!
*!3J1I8D-agbdbc!
*!3J1I8D-agbddg!
*!3J1I8D-agbdfa!
967 04 21-16
967 04 23-13
967 04 23-16
967 04 23-20
*!3J1I8D-agbbef!
*!3J1I8D-agbdcj!
*!3J1I8D-agbded!
*!3J1I8D-agbdgh!
359G E-TECH
967 04 26-01
967 04 26-18
*!3J1I8D-ahfabc!
967 04 26-13
967 04 26-20
*!3J1I8D-ahfagh!
3/8 - EPA - US, CA
16 - 3/8 - H42 - EPA - US, CA
967 04 26-15
967 04 27-01
967 04 27-66
*!3J1I8D-ahfadg!
· Heated handles
*!3J1I8D-ahfafa!
*!3J1I8D-ahfacj!
· Air Injection
· LowVib
· E-TECH
*!3J1I8D-ahfahe!
*!3J1I8D-ahfaji!
15 - 3/8 - H42 - EPA - US, CA
18 - 3/8 - H42 - EPA - US, CA
20 - 3/8 - H42 - EPA - US, CA
967 04 26-16
967 04 27-65
967 04 27-68
967 04 27-70
*!3J1I8D-ahfaed!
*!3J1I8D-ahfaib!
*!3J1I8D-ahfbae!
31
*!3J1I8D-ahfbbb!
357XP
965 55 01-01
965 55 02-70
*!3J1I8D-agabei!
Engine - - others
965 55 01-13
965 55 03-01
*!3J1I8D-agabgc!
13” - .325” - H25 - - others
18” - 3/8” - H42 - EPA - US,CA
965 55 01-15
965 55 03-13
965 55 04-68
*!3J1I8D-affjbf!
*!3J1I8D-afgaia!
*!3J1I8D-agadcc!
15” - .325” - H25 - - others
20” - 3/8” - H42 - EPA - US,CA
965 55 01-16
965 55 03-15
965 55 04-70
*!3J1I8D-affjcc!
*!3J1I8D-agabhj!
*!3J1I8D-agaddj!
16” - .325” - H25 - - others
Engine - AS - AU,NZ,BR
965 55 01-18
965 55 03-16
965 55 05-01
*!3J1I8D-affjdj!
*!3J1I8D-afgahd!
*!3J1I8D-affjai!
· Air Injection
· LowVib
*!3J1I8D-agabig!
*!3J1I8D-agadeg!
18” - .325” - H25 - - others
15” - 3/8” - H42 - AS - AU,NZ,BR
13” - .325” - H25 - EPA - US,CA
965 55 01-20
965 55 03-18
965 55 05-65
965 55 08-13
*!3J1I8D-affjeg!
*!3J1I8D-agabjd!
*!3J1I8D-agadjb!
*!3J1I8D-agaeef!
20” - .325” - H25 - - others
16” - 3/8” - H42 - AS - AU,NZ,BR
15” - .325” - H25 - EPA - US,CA
965 55 02-01
965 55 03-20
965 55 05-66
965 55 08-15
*!3J1I8D-agabff!
*!3J1I8D-agacaj!
*!3J1I8D-agaeah!
*!3J1I8D-agaefc!
18” - 3/8” - H42 - AS - AU,NZ,BR
16” - .325” - H25 - EPA - US,CA
965 55 02-65
965 55 04-01
965 55 05-68
965 55 08-16
*!3J1I8D-afgaec!
*!3J1I8D-agacfe!
*!3J1I8D-agaebe!
*!3J1I8D-agaegj!
15” - 3/8” - H42 - EPA - US,CA
20” - 3/8” - H42 - AS - AU,NZ,BR
18” - .325” - H25 - EPA - US,CA
965 55 02-66
965 55 04-65
965 55 05-70
965 55 08-18
*!3J1I8D-afgafj!
*!3J1I8D-afgcac!
*!3J1I8D-agaecb!
*!3J1I8D-agaehg!
16” - 3/8” - H42 - EPA - US,CA
20” - .325” - H25 - EPA - US,CA
965 55 02-68
965 55 04-66
965 55 08-01
965 55 08-20
*!3J1I8D-afgagg!
*!3J1I8D-agadbf!
*!3J1I8D-agaedi!
32
*!3J1I8D-agaeid!
357XP E-TECH
Oil tank volume: 0.38l/0.80 US pint. Chain pitch: .325 3/8".
965 55 06-01
965 55 06-18
*!3J1I8D-ahegge!
965 55 06-13
965 55 06-20
*!3J1I8D-ahehbi!
3/8 - EPA - US , CA
16 - 3/8 - H42 - EPA - US , CA
965 55 06-15
965 55 07-01
965 55 07-66
*!3J1I8D-ahegii!
*!3J1I8D-ahehab!
*!3J1I8D-aheghb!
· Air Injection
· LowVib
· E-TECH
*!3J1I8D-ahehcf!
*!3J1I8D-ahehej!
15 - 3/8 - H42 - EPA - US , CA
18 - 3/8 - H42 - EPA - US , CA
20 - 3/8 - H42 - EPA - US , CA
965 55 06-16
965 55 07-65
965 55 07-68
965 55 07-70
*!3J1I8D-ahegjf!
*!3J1I8D-ahehdc!
*!3J1I8D-ahehfg!
33
*!3J1I8D-ahehgd!
357XPG
965 55 11-01
965 55 12-01
*!3J1I8D-agafdh!
13” - .325” - H25 - EPA - US,CA
965 55 11-13
965 55 12-13
*!3J1I8D-agafjj!
15” - .325” - H25 - EPA - US,CA
965 55 11-15
965 55 12-15
965 55 13-01
*!3J1I8D-afhbff!
· Heated handles
*!3J1I8D-agafic!
*!3J1I8D-afhbei!
· Air Injection
· LowVib
*!3J1I8D-agagaf!
*!3J1I8D-agagib!
16” - .325” - H25 - EPA - US,CA
965 55 11-16
965 55 12-16
965 55 13-13
965 55 13-18
*!3J1I8D-afhbgc!
*!3J1I8D-agagbc!
*!3J1I8D-afhbjd!
*!3J1I8D-afhccd!
18” - .325” - H25 - EPA - US,CA
965 55 11-18
965 55 12-18
965 55 13-15
965 55 13-20
*!3J1I8D-afhbhj!
*!3J1I8D-agagcj!
*!3J1I8D-afhcaj!
*!3J1I8D-afhcda!
20” - .325” - H25 - EPA - US,CA
965 55 11-20
965 55 12-20
965 55 13-16
965 55 14-68
*!3J1I8D-afhbig!
*!3J1I8D-agagdg!
*!3J1I8D-afhcbg!
*!3J1I8D-ahjicj!
357XPG E-TECH
965 55 16-01
965 55 16-16
*!3J1I8D-ahehha!
*!3J1I8D-aheibh!
965 55 16-13
965 55 16-18
*!3J1I8D-ahehje!
*!3J1I8D-aheice!
965 55 16-15
965 55 16-20
*!3J1I8D-aheiaa!
*!3J1I8D-aheidb!
34
· Air Injection
· LowVib
· E-TECH
· Heated handles
353
15" - .325 - H25 - CE - Europe
967 07 51-01
967 07 51-15
*!3J1I8D-ahcebh!
16" - .325 - H25 - CE - Europe
967 07 51-33
967 07 51-16
*!3J1I8D-ahcejd!
15" - .325 - H30 - CE - Europe
18" - .325 - H25 - CE - Europe
16" - .325 - H30 - - others
967 07 51-35
967 07 51-18
967 07 53-36
*!3J1I8D-ahcedb!
*!3J1I8D-ahcfaj!
*!3J1I8D-ahcfgb!
16" - .325 - H30 - CE - Europe
20" - .325 - H25 - CE - Europe
18" - .325 - H30 - - others
967 07 51-36
967 07 51-20
967 07 53-38
*!3J1I8D-ahceei!
*!3J1I8D-ahceig!
13" - .325 - H30 - CE - Europe
*!3J1I8D-ahcece!
· Air Injection
· LowVib
*!3J1I8D-ahcfcd!
*!3J1I8D-ahcfhi!
18" - .325 - H30 - CE - Europe
Engine - - others
20" - .325 - H30 - - others
16" - .325 - H25 - - others
967 07 51-38
967 07 53-01
967 07 53-40
967 07 53-16
*!3J1I8D-ahceff!
*!3J1I8D-ahcfda!
*!3J1I8D-ahcfif!
*!3J1I8D-ahcgbf!
20" - .325 - H30 - CE - Europe
13" - .325 - H30 - - others
13" - .325 - H25 - - others
18" - .325 - H25 - - others
967 07 51-40
967 07 53-33
967 07 53-13
967 07 53-18
*!3J1I8D-ahcegc!
*!3J1I8D-ahcfeh!
*!3J1I8D-ahcfjc!
*!3J1I8D-ahcgcc!
15" - .325 - H30 - - others
15" - .325 - H25 - - others
20" - .325 - H25 - - others
967 07 51-13
967 07 53-35
967 07 53-15
967 07 53-20
*!3J1I8D-ahcehj!
*!3J1I8D-ahcffe!
*!3J1I8D-ahcgai!
35
*!3J1I8D-ahcgdj!
353
18" - .325 - H30 - CE - Europe
967 07 58-01
967 07 58-38
*!3J1I8D-ahfiid!
20" - .325 - H30 - CE - Europe
967 07 58-33
967 07 58-40
*!3J1I8D-ahfjfb!
15" - .325 - H30 - CE - Europe
13" - .325 - H25 - CE - Europe
16" - .325 - H25 - CE - Europe
967 07 58-35
967 07 58-13
967 07 58-16
*!3J1I8D-ahfjbd!
*!3J1I8D-ahfjee!
13" - .325 - H30 - CE - Europe
*!3J1I8D-ahfjag!
· Air Injection
· LowVib
*!3J1I8D-ahfjgi!
*!3J1I8D-ahfjic!
16" - .325 - H30 - CE - Europe
15" - .325 - H25 - CE - Europe
18" - .325 - H25 - CE - Europe
20" - .325 - H25 - CE - Europe
967 07 58-36
967 07 58-15
967 07 58-18
967 07 58-20
*!3J1I8D-ahfjdh!
*!3J1I8D-ahfjhf!
*!3J1I8D-ahfjjj!
36
*!3J1I8D-ahgaac!
353G
353G - 15" - .325 - H25 - CE - Europe
967 07 61-01
967 07 61-15
*!3J1I8D-ahchfc!
16" - .325 - H25 - CE - Europe
967 07 61-33
967 07 61-16
*!3J1I8D-ahcidh!
15" - .325 - H30 - CE - Europe
18" - .325 - H25 - CE - Europe
16" - .325 - H30 - CE - Europe
967 07 61-35
967 07 61-18
967 07 63-36
*!3J1I8D-ahchhg!
*!3J1I8D-ahciee!
*!3J1I8D-ahdaab!
16" - .325 - H30 - CE - Europe
20" - .325 - H325 - CE - Europe
18" - .325 - H30 - CE - Europe
967 07 61-36
967 07 61-20
967 07 63-38
*!3J1I8D-ahchid!
· Heated handles
*!3J1I8D-ahcica!
13" - .325 - H30 - C E- Europa
*!3J1I8D-ahchgj!
· Air Injection
· LowVib
*!3J1I8D-ahcifb!
*!3J1I8D-ahdabi!
18" - .325 - H30 - CE - Europe
20" - .325 - H30 - CE - Europe
16" - .325 - H25 - CE - Europe
967 07 61-38
967 07 63-01
967 07 63-40
967 07 63-16
*!3J1I8D-ahchja!
*!3J1I8D-ahcjhe!
*!3J1I8D-ahdacf!
*!3J1I8D-ahdafg!
20" - .325 - H30 - CE - Europe
13" - .325 - H30 - CE - Europe
13" - .325 - H25 - CE - Europe
18" - .325 - H25 - CE - Europe
967 07 61-40
967 07 63-33
967 07 63-13
967 07 63-18
*!3J1I8D-ahciag!
*!3J1I8D-ahcjib!
*!3J1I8D-ahdadc!
*!3J1I8D-ahdagd!
13" - .325 - H25 - CE - Europe
15" - .325 - H30 - CE - Europe
15" - .325 - H25 - CE - Europe
20" - .325 - H25 - CE - Europe
967 07 61-13
967 07 63-35
967 07 63-15
967 07 63-20
*!3J1I8D-ahcibd!
*!3J1I8D-ahcjji!
*!3J1I8D-ahdaej!
37
*!3J1I8D-ahdaha!
353G
16" - .325 - H25 - CE - Europe
967 07 67-01
967 07 67-16
*!3J1I8D-ahgabj!
18" - .325 - H25 - CE - Europe
967 07 67-33
967 07 67-18
*!3J1I8D-ahgbab!
15" - .325 - H30 - CE - Europe
20 - .325 - H25 - CE - Europe
18" - .325 - H30 - CE - Europe
967 07 67-35
967 07 67-20
967 07 69-38
*!3J1I8D-ahgadd!
*!3J1I8D-ahgbbi!
*!3J1I8D-ahgcig!
16" - .325 - H30 - CE - Europe
20" - .325 - H30 - CE - Europe
967 07 67-36
967 07 69-01
967 07 69-40
*!3J1I8D-ahgaea!
*!3J1I8D-ahgcei!
*!3J1I8D-ahgcjd!
18" - .325 - H30 - CE - Europe
13" - .325 - H30 - CE - Europe
13" - .325 - H25 - CE - Europe
967 07 67-38
967 07 69-33
967 07 69-13
*!3J1I8D-ahgafh!
· Heated handles
*!3J1I8D-ahgajf!
13" - .325 - H30 - CE - Europe
*!3J1I8D-ahgacg!
· Air Injection
· LowVib
*!3J1I8D-ahgcff!
*!3J1I8D-ahgdaj!
13" - .325 - H25 - CE - Europe
15" - .325 - H30 - CE - Europe
15" - .325 - H25 - CE - Europe
18" - .325 - H25 - CE - Europe
967 07 67-13
967 07 69-35
967 07 69-15
967 07 69-18
*!3J1I8D-ahgahb!
*!3J1I8D-ahgcgc!
*!3J1I8D-ahgdbg!
*!3J1I8D-ahgdda!
15" - .325 - H25 - CE - Europe
16" - .325 - H30 - CE - Europe
16" - .325 - H25 - CE - Europe
20" - .325 - H25 - CE - Europe
967 07 67-15
967 07 69-36
967 07 69-16
967 07 69-20
*!3J1I8D-ahgaii!
*!3J1I8D-ahgchj!
*!3J1I8D-ahgdcd!
38
*!3J1I8D-ahgdeh!
353 E-TECH
15" - .325 - H25 - CE - Europe
967 07 55-01
967 07 55-15
*!3J1I8D-ahddbf!
16" - .325 - H25 - CE - Europe,others
967 07 55-33
967 07 55-16
*!3J1I8D-ahddjb!
18" .325 - H25 - CE - Europe,others
16" - .325 - H30 - EPA - US,CA
967 07 55-35
967 07 55-18
967 07 72-36
*!3J1I8D-ahddcc!
*!3J1I8D-ahdeah!
*!3J1I8D-aibdfi!
18" - .325 - H30 - EPA - US,CA
967 07 55-36
967 07 55-20
967 07 72-38
*!3J1I8D-ahddeg!
*!3J1I8D-ahddie!
*!3J1I8D-ahddcc!
· Air Injection
· LowVib
· E-TECH
*!3J1I8D-ahdecb!
*!3J1I8D-aibdgf!
Engine - .325 - EPA - US,CA
20" - .325 - H30 - EPA - US,CA
16" - .325 - H25 - EPA - US,CA
967 07 55-38
967 07 72-01
967 07 72-40
967 07 72-16
*!3J1I8D-ahddfd!
*!3J1I8D-aibdch!
*!3J1I8D-aibdhc!
*!3J1I8D-aibeac!
13" - .325 - H30 - EPA - US,CA
13" - .325 - H25 - EPA - US,CA
18" - .325 - H25 - EPA - US,CA
967 07 55-40
967 07 72-33
967 07 72-13
967 07 72-18
*!3J1I8D-ahddga!
*!3J1I8D-aibdde!
*!3J1I8D-aibdij!
*!3J1I8D-aibebj!
15" - .325 - H30 - EPA - US,CA
15" - .325 - H25 - EPA - US,CA
20" - .325 - H25 - EPA - US,CA
967 07 55-13
967 07 72-35
967 07 72-15
967 07 72-20
*!3J1I8D-ahddhh!
*!3J1I8D-aibdeb!
*!3J1I8D-aibdjg!
39
*!3J1I8D-aibecg!
353G E-TECH
967 07 65-01
967 07 65-15
*!3J1I8D-ahdedi!
967 07 65-33
967 07 65-16
*!3J1I8D-ahdfca!
18" .325 - H25 - CE - Europe,others
16" - .325 - H30 - EPA - US, CA
967 07 65-35
967 07 65-18
967 07 66-36
*!3J1I8D-ahdegj!
*!3J1I8D-ahdfee!
*!3J1I8D-aibcec!
18" - .325 - H30 - EPA - US, CA
967 07 65-36
967 07 65-20
967 07 66-38
*!3J1I8D-ahdehg!
· Heated handles
*!3J1I8D-ahdfbd!
*!3J1I8D-ahdefc!
· Air Injection
· LowVib
· E-TECH
*!3J1I8D-ahdffb!
*!3J1I8D-aibcfj!
Engine - .325 - EPA - US, CA
20" - .325 - H30 - EPA - US, CA
16" - .325 - H25 - EPA - US, CA
967 07 65-38
967 07 66-01
967 07 66-40
967 07 66-16
*!3J1I8D-ahdeid!
*!3J1I8D-aibcbb!
*!3J1I8D-aibcgg!
*!3J1I8D-aibcjh!
20" - .325 - H30 - CE - Europe, others
13" - .325 - H30 - EPA - US, CA
13" - .325 - H25 - EPA - US, CA
18" - .325 - H25 - EPA - US, CA
967 07 65-40
967 07 66-33
967 07 66-13
967 07 66-18
*!3J1I8D-ahdeja!
*!3J1I8D-aibcci!
*!3J1I8D-aibchd!
*!3J1I8D-aibdad!
15" - .325 - H30 - EPA - US, CA
15" - .325 - H25 - EPA - US, CA
20" - .325 - H25 - EPA - US, CA
967 07 65-13
967 07 66-35
967 07 66-15
967 07 66-20
*!3J1I8D-ahdfag!
*!3J1I8D-aibcdf!
*!3J1I8D-aibcia!
40
*!3J1I8D-aibdba!
353G E-TECH
18" - .325 - H30 - CE - Europe
967 07 68-01
967 07 68-38
*!3J1I8D-ahgbcf!
20" - .325 - H30 - CE - Europe
967 07 68-33
967 07 68-40
*!3J1I8D-ahgbih!
15" - .325 - H30 - CE - Europe
13" - .325 - H25 - CE - Europe
16" - .325 - H25 - CE - Europe
967 07 68-35
967 07 68-13
967 07 68-16
*!3J1I8D-ahgbfg!
· Heated handles
*!3J1I8D-ahgbha!
13" - .325 - H30 - CE - Europe
*!3J1I8D-ahgbej!
· Air Injection
· LowVib
· E-TECH
*!3J1I8D-ahgbje!
*!3J1I8D-ahgcbh!
16" - .325 - H30 - CE - Europe
15" - .325 - H25 - CE - Europe
18" - .325 - H25 - CE - Europe
20" - .325 - H25 - CE - Europe
967 07 68-36
967 07 68-15
967 07 68-18
967 07 68-20
*!3J1I8D-ahgbgd!
*!3J1I8D-ahgcaa!
*!3J1I8D-ahgcce!
41
*!3J1I8D-ahgcdb!
346XP
13” - .325” - H30 - - others
965 41 01-01
965 41 03-33
*!3J1I8D-aeaggj!
*!3J1I8D-aeahhf!
13” - .325” - H30 - CE - Europe
15” - .325” - H30 - - others
965 41 01-33
965 41 03-35
*!3J1I8D-aeaghg!
· Air Injection
· LowVib
*!3J1I8D-aeahic!
15” - .325” - H30 - CE - Europe
16” - .325” - H30 - - others
15” - .325” - H30 - EPA - US,CA
13" - .325 - H30 - JP only
965 41 01-35
965 41 03-36
965 41 04-35
965 41 07-33
*!3J1I8D-aeagid!
*!3J1I8D-aeahjj!
*!3J1I8D-aegfbh!
*!3J1I8D-afifad!
16” - .325” - H30 - CE - Europe
18” - .325” - H30 - - others
16” - .325” - H30 - EPA - US,CA
15" - .325 - H30 - JP only
965 41 01-36
965 41 03-38
965 41 04-36
965 41 07-35
*!3J1I8D-aeagja!
*!3J1I8D-aeaiaf!
*!3J1I8D-aegfce!
*!3J1I8D-afifba!
18” - .325” - H30 - CE - Europe
20” - .325” - H30 - - others
18” - .325” - H30 - EPA - US,CA
16" - .325 - H30 - JP only
965 41 01-38
965 41 03-40
965 41 04-38
965 41 07-36
*!3J1I8D-aeahag!
*!3J1I8D-affhgc!
*!3J1I8D-aegfdb!
*!3J1I8D-afifch!
20” - .325” - H30 - CE - Europe
13” - .325” - H25 - - others
20” - .325” - H30 - EPA - US,CA
18" - .325 - H30 - JP only
965 41 01-40
965 41 03-13
965 41 04-40
965 41 07-38
*!3J1I8D-affhei!
*!3J1I8D-afiefj!
*!3J1I8D-afifeb!
*!3J1I8D-afifde!
13” - .325” - H25 - CE - Europe
15” - .325” - H25 - - others
13” - .325” - H25 - EPA - US,CA
20" - .325 - H30 - JP only
965 41 01-13
965 41 03-15
965 41 04-13
965 41 07-40
*!3J1I8D-afiebb!
*!3J1I8D-afiegg!
*!3J1I8D-afiffi!
*!3J1I8D-affiaj!
15” - .325” - H25 - CE - Europe
16” - .325” - H25 - - others
15” - .325” - H25 - EPA - US,CA
13" - .325 - H25 - JP only
965 41 01-15
965 41 03-16
965 41 04-15
965 41 07-13
*!3J1I8D-afieci!
*!3J1I8D-afiehd!
*!3J1I8D-afifgf!
*!3J1I8D-afigac!
16” - .325” - H25 - CE - Europe
18” - .325” - H25 - - others
16” - .325” - H25 - EPA - US,CA
15" - .325 - H25 - JP only
965 41 01-16
965 41 03-18
965 41 04-16
965 41 07-15
*!3J1I8D-afiedf!
*!3J1I8D-afieia!
*!3J1I8D-afifhc!
*!3J1I8D-afigbj!
18” - .325” - H25 - CE - Europe
20” - .325” - H25 - - others
18” - .325” - H25 - EPA - US,CA
16" - .325 - H25 - JP only
965 41 01-18
965 41 03-20
965 41 04-18
965 41 07-16
*!3J1I8D-afieec!
*!3J1I8D-affhhj!
*!3J1I8D-afifij!
*!3J1I8D-afigcg!
20” - .325” - H25 - CE - Europe
20” - .325” - H25 - EPA - US,CA
18" - .325 - H25 - JP only
965 41 01-20
965 41 04-01
965 41 04-20
965 41 07-18
*!3J1I8D-affhff!
*!3J1I8D-aeaibc!
*!3J1I8D-afifjg!
*!3J1I8D-afigdd!
Engine - - others
13” - .325” - H30 - EPA - US,CA
Engine - JP only
20" - .325 - H25 - JP only
965 41 03-01
965 41 04-33
965 41 07-01
965 41 07-20
*!3J1I8D-aeahgi!
*!3J1I8D-aegfaa!
*!3J1I8D-afiejh!
42
*!3J1I8D-affibg!
43
346XP
18" - .325 - H30 - CE - Europe
965 41 08-01
965 41 08-38
*!3J1I8D-agjcdd!
20" - .325 - H30 - CE - Europe
965 41 08-33
965 41 08-40
*!3J1I8D-agjchb!
15" - .325 - H30 - CE - Europe
13" - .325 - H25 - CE - Europe
16" - .325 - H25 - CE - Europe
965 41 08-35
965 41 08-13
965 41 08-16
*!3J1I8D-agiefi!
*!3J1I8D-agjcge!
13" - .325 - H30 - CE - Europe
*!3J1I8D-agjcea!
· Air Injection
· LowVib
*!3J1I8D-agjcii!
*!3J1I8D-agjdab!
16" - .325 - H30 - CE - Europe
15" - .325 - H25 - CE - Europe
18" - .325 - H25 - CE - Europe
20" - .325 - H25 - CE - Europe
965 41 08-36
965 41 08-15
965 41 08-18
965 41 08-20
*!3J1I8D-agjcfh!
*!3J1I8D-agjcjf!
*!3J1I8D-agjdbi!
44
*!3J1I8D-agjdcf!
346XPG
13” - .325” - H30 - EPA - US,CA
965 41 11-01
965 41 12-33
*!3J1I8D-aeaied!
· Heated handles
*!3J1I8D-aegfei!
13” - .325” - H30 - CE - Europe
15” - .325” - H30 - EPA - US,CA
965 41 11-33
965 41 12-35
*!3J1I8D-aeaifa!
· Air Injection
· LowVib
*!3J1I8D-aegfff!
15” - .325” - H30 - CE - Europe
16” - .325” - H30 - EPA - US,CA
15” - .325” - H30 - CE - Europe
13” - .325” - H30 - JP
965 41 11-35
965 41 12-36
965 41 13-35
965 41 17-33
*!3J1I8D-aeaigh!
*!3J1I8D-aegfgc!
*!3J1I8D-afigii!
*!3J1I8D-afiice!
16” - .325” - H30 - CE - Europe
18” - .325” - H30 - EPA - US,CA
16” - .325” - H30 - CE - Europe
15” - .325” - H30 - JP
965 41 11-36
965 41 12-38
965 41 13-36
965 41 17-35
*!3J1I8D-aeaihe!
*!3J1I8D-aegfhj!
*!3J1I8D-afigjf!
*!3J1I8D-afiidb!
18” - .325” - H30 - CE - Europe
20” - .325” - H30 - EPA - US,CA
18” - .325” - H30 - CE - Europe
16” - .325” - H30 - JP
965 41 11-38
965 41 12-40
965 41 13-38
965 41 17-36
*!3J1I8D-aeaiib!
*!3J1I8D-afihfg!
*!3J1I8D-afihab!
*!3J1I8D-afiiei!
20” - .325” - H30 - CE - Europe
13” - .325” - H25 - EPA - US,CA
20” - .325” - H30 - CE - Europe
18” - .325” - H30 - JP
965 41 11-40
965 41 12-13
965 41 13-40
965 41 17-38
*!3J1I8D-afficd!
*!3J1I8D-afihgd!
*!3J1I8D-affieh!
*!3J1I8D-aeggbg!
13” - .325” - H25 - CE - Europe
15” - .325” - H25 - EPA - US,CA
13” - .325” - H25 - CE - Europe
20” - .325” - H30 - JP
965 41 11-13
965 41 12-15
965 41 13-13
965 41 17-40
*!3J1I8D-affcgh!
*!3J1I8D-afihha!
*!3J1I8D-afihbi!
*!3J1I8D-affiif!
15” - .325” - H25 - CE - Europe
16” - .325” - H25 - EPA - US,CA
15” - .325” - H25 - CE - Europe
13” - .325” - H25 - JP
965 41 11-15
965 41 12-16
965 41 13-15
965 41 17-13
*!3J1I8D-affche!
*!3J1I8D-afihih!
*!3J1I8D-afihcf!
*!3J1I8D-afiiff!
16” - .325” - H25 - CE - Europe
18” - .325” - H25 - EPA - US,CA
16” - .325” - H25 - CE - Europe
15” - .325” - H25 - JP
965 41 11-16
965 41 12-18
965 41 13-16
965 41 17-15
*!3J1I8D-afigea!
*!3J1I8D-afihje!
*!3J1I8D-afihdc!
*!3J1I8D-aegfjd!
18” - .325” - H25 - CE - Europe
20” - .325” - H25 - EPA - US,CA
18” - .325” - H25 - CE - Europe
16” - .325” - H25 - JP
965 41 11-18
965 41 12-20
965 41 13-18
965 41 17-16
*!3J1I8D-afigfh!
*!3J1I8D-afiiaa!
*!3J1I8D-afihej!
*!3J1I8D-afiigc!
20” - .325” - H25 - CE - Europe
20” - .325” - H25 - CE - Europe
18” - .325” - H25 - JP
965 41 11-20
965 41 13-01
965 41 13-20
965 41 17-18
*!3J1I8D-affida!
*!3J1I8D-afigge!
*!3J1I8D-affife!
*!3J1I8D-aeggaj!
13” - .325” - H30 - CE - Europe
Engine - .325” - JP
20” - .325” - H25 - JP
965 41 12-01
965 41 13-33
965 41 17-01
965 41 17-20
*!3J1I8D-aeaiji!
*!3J1I8D-afighb!
*!3J1I8D-afiibh!
45
*!3J1I8D-affijc!
46
346XPG
15" - .325 - H25 - CE - Europe
965 41 14-01
965 41 14-15
*!3J1I8D-agjddc!
16" - .325 - H25 - CE - Europe
965 41 14-33
965 41 14-16
*!3J1I8D-agjeaa!
15" - .325 - H30 - CE - Europe
18" - .325 - H25 - CE - Europe
16" - .325 - H30 - CE - Europe
965 41 14-35
965 41 14-18
965 41 19-36
*!3J1I8D-agieeb!
*!3J1I8D-agjebh!
*!3J1I8D-agjfjc!
16" - .325 - H30 - CE - Europe
20" - .325 - H25 - CE - Europe
18" - .325 - H30 - CE - Europe
965 41 14-36
965 41 14-20
965 41 19-38
*!3J1I8D-agjdfg!
· Heated handles
*!3J1I8D-agjdje!
13" - .325 - H30 - CE - Europe
*!3J1I8D-agjdej!
· Air Injection
· LowVib
*!3J1I8D-agjece!
*!3J1I8D-agjgai!
18" - .325 - H30 - CE - Europe
20" - .325 - H30 - CE - Europe
16" - .325 - H25 - CE - Europe
965 41 14-38
965 41 19-01
965 41 19-40
965 41 19-16
*!3J1I8D-agjdgd!
*!3J1I8D-agjffe!
*!3J1I8D-agjgbf!
*!3J1I8D-agjgeg!
20" - .325 - H30 - CE - Europe
13" - .325 - H30 - CE - Europe
13" - .325 - H25 - CE - Europe
18" - .325 - H25 - CE - Europe
965 41 14-40
965 41 19-33
965 41 19-13
965 41 19-18
*!3J1I8D-agjdha!
*!3J1I8D-agjfhi!
*!3J1I8D-agjgcc!
*!3J1I8D-agjgfd!
13" - .325 - H25 - CE - Europe
15" - .325 - H30 - CE - Europe
15" - .325 - H25 - CE - Europe
20" - .325 - H25 - CE - Europe
965 41 14-13
965 41 19-35
965 41 19-15
965 41 19-20
*!3J1I8D-agjdih!
*!3J1I8D-agjfif!
*!3J1I8D-agjgdj!
47
*!3J1I8D-agjgga!
346XP E-TECH
15” - .325” - H25 - CE - Europe, others
965 41 05-01
965 41 05-15
*!3J1I8D-aeaicj!
965 41 05-33
965 41 05-16
*!3J1I8D-afjafa!
16” - .325” - H30 - EPA - US, CA
965 41 05-35
965 41 05-18
965 41 06-36
*!3J1I8D-afjaaf!
*!3J1I8D-afjagh!
*!3J1I8D-afjaji!
18” - .325” - H30 - EPA - US, CA
965 41 05-36
965 41 05-20
965 41 06-38
*!3J1I8D-afjabc!
*!3J1I8D-afjaed!
*!3J1I8D-afijjc!
· Air Injection
· LowVib
· E-TECH
*!3J1I8D-affhjd!
*!3J1I8D-afjbae!
Engine - .325” - EPA - US, CA
20” - .325” - H30 - EPA - US, CA
16” - .325” - H25 - EPA - US, CA
965 41 05-38
965 41 06-01
965 41 06-40
965 41 06-16
*!3J1I8D-afjacj!
*!3J1I8D-aeaidg!
*!3J1I8D-afjbbb!
*!3J1I8D-afjbec!
13” - .325” - H30 - EPA - US, CA
13” - .325” - H25 - EPA - US, CA
18” - .325” - H25 - EPA - US, CA
965 41 05-40
965 41 06-33
965 41 06-13
965 41 06-18
*!3J1I8D-affhig!
*!3J1I8D-afjahe!
*!3J1I8D-afjbci!
*!3J1I8D-afjbfj!
15” - .325” - H30 - EPA - US, CA
15” - .325” - H25 - EPA - US, CA
20” - .325” - H25 - EPA - US, CA
965 41 05-13
965 41 06-35
965 41 06-15
965 41 06-20
*!3J1I8D-afjadg!
*!3J1I8D-afjaib!
*!3J1I8D-afjbdf!
48
*!3J1I8D-afjbgg!
346XPG E-TECH
· Air Injection
· LowVib
· E-TECH
· Heated handles
965 41 15-01
*!3J1I8D-afjbhd!
965 41 15-33
*!3J1I8D-afjbia!
965 41 15-15
*!3J1I8D-afjceb!
965 41 15-35
*!3J1I8D-afjbjh!
965 41 15-16
*!3J1I8D-afjcfi!
965 41 16-35
*!3J1I8D-afjcij!
346G E-tech - 18" - .325 - H25 - CE - Europe,
others
965 41 15-36
965 41 15-18
965 41 16-36
965 41 16-15
*!3J1I8D-afjcad!
*!3J1I8D-afjcgf!
*!3J1I8D-afjcjg!
*!3J1I8D-afjdcg!
965 41 15-38
965 41 15-20
965 41 16-38
965 41 16-16
*!3J1I8D-afjcba!
*!3J1I8D-afjchc!
*!3J1I8D-afjdac!
*!3J1I8D-afjddd!
965 41 15-40
965 41 16-01
965 41 16-40
965 41 16-18
*!3J1I8D-afjcch!
*!3J1I8D-aeajae!
*!3J1I8D-affigb!
*!3J1I8D-afjdea!
965 41 15-13
965 41 16-33
965 41 16-13
965 41 16-20
*!3J1I8D-afjcde!
*!3J1I8D-aegfig!
*!3J1I8D-afjdbj!
49
*!3J1I8D-affihi!
346XPG E-TECH
18" - .325 - H30 - CE - Europe
965 41 18-01
965 41 18-38
*!3J1I8D-agjedb!
20" - .325 - H30 - CE - Europe
965 41 18-33
965 41 18-40
*!3J1I8D-agjeig!
15" - .325 - H30 - CE - Europe
13" - .325 - H25 - CE - Europe
16" - .325 - H25 - CE - Europe
965 41 18-35
965 41 18-13
965 41 18-16
*!3J1I8D-agjeff!
· Heated handles
*!3J1I8D-agjehj!
13" - .325 - H30 - CE - Europe
*!3J1I8D-agjeei!
· Air Injection
· LowVib
· E-TECH
*!3J1I8D-agjejd!
*!3J1I8D-agjfbg!
16" - .325 - H30 - CE - Europe
15" - .325 - H25 - CE - Europe
18" - .325 - H25 - CE - Europe
20" - .325 - H25 - CE - Europe
965 41 18-36
965 41 18-15
965 41 18-18
965 41 18-20
*!3J1I8D-agjegc!
*!3J1I8D-agjfaj!
*!3J1I8D-agjfcd!
*!3J1I8D-agjfeh!
339XP
Engine - CE - Europe,JP
Engine - other markets exc. US
965 26 12-01
965 26 13-01
*!3J1I8D-ahccge!
*!3J1I8D-ahcdbi!
339XP - 13" - .325 - H30 - CE - Europe,JP
13" - .325 - H30 - other markets exc. US
965 26 12-33
965 26 13-33
*!3J1I8D-ahcchb!
· Air Injection
· LowVib
· Smart Start Automatic
decompression valve
*!3J1I8D-ahcdcf!
15" - .325 - H30 - CE - Europe,JP
Engine - Japan
965 26 12-35
965 26 13-35
965 08 79-01
*!3J1I8D-ahccii!
*!3J1I8D-ahcddc!
*!3J1I8D-bffcjf!
16" - .325 - H30 - CE - Europe,JP
13" - .325 - H30 - Japan
965 26 12-36
965 26 13-36
965 08 79-33
*!3J1I8D-ahccjf!
*!3J1I8D-ahcdej!
*!3J1I8D-behije!
18" - .325 - H30 - CE - Europe,JP
15" - .325 - H30 - Japan
965 26 12-38
965 26 13-38
965 08 79-35
*!3J1I8D-ahcdab!
*!3J1I8D-ahcdfg!
*!3J1I8D-behjaa!
50
· Fuel pump
338XPT
Engine - EPA, AS,US exc.Calif. CA
Engine - CARB II Calif. only
965 25 11-01
965 25 12-01
*!3J1I8D-ahbjfd!
· Fuel pump
· Integrated rope holder
*!3J1I8D-ahbjjb!
12" - 3/8 - S36 - EPA, AS,US exc.Calif. CA
12" - 3/8 - S36 - CARB II Calif. only
965 25 11-12
965 25 12-12
*!3J1I8D-ahbjga!
· Air Injection
· LowVib
· Smart Start Automatic
decompression valve
*!3J1I8D-ahcaae!
14" - 3/8 - S36 - CE -Europe
965 25 11-14
965 25 12-14
965 25 13-01
965 25 13-14
*!3J1I8D-ahbjga!
*!3J1I8D-ahcaae!
*!3J1I8D-ahcadf!
*!3J1I8D-ahcagg!
12" - 3/8 - S36 - CE - Europe
16" - S36 - CE - Europe
965 25 11-16
965 25 12-16
965 25 13-12
965 25 13-16
*!3J1I8D-ahbjie!
*!3J1I8D-ahcaae!
*!3J1I8D-ahcafj!
*!3J1I8D-ahcaia!
334T
Engine - EPA,AS - CA,AU,US excl. calif.
3/8 - Europe
965 01 01-01
965 01 02-01
*!3J1I8D-ahbijc!
*!3J1I8D-ahbjcc!
12" - 3/8 - S36 - EPA,AS - CA,AU,US exc. Calif.
12 - 3/8 - S36 - Europe
965 01 01-12
965 01 02-12
*!3J1I8D-ahbjai!
*!3J1I8D-ahbjdj!
14" - 3/8 - S36 - EPA,AS - CA,AU,US exc.Calif.
14 - 3/8 - S36 - Europe
965 01 01-14
965 01 02-14
*!3J1I8D-ahbjbf!
*!3J1I8D-ahbjeg!
51
· Air Injection
· LowVib
· Fuel pump
· Integrated rope holder
55
18” - .325” - H25 - CE - Europe
967 05 21-01
967 05 21-18
*!3J1I8D-acbdda!
*!3J1I8D-acbdgb!
13” - .325” - H30 - CE - Europe
20” - .325” - H25 - CE - Europe
967 05 21-33
967 05 21-20
*!3J1I8D-agfaic!
· Air Injection
· LowVib
*!3J1I8D-agfbaf!
15” - .325” - H30 - CE - Europe
Engine - RU
15” - .325” - H25 - RU
967 05 21-35
967 05 22-01
967 05 22-15
*!3J1I8D-aeggcd!
*!3J1I8D-acbedj!
*!3J1I8D-acbefd!
16” - .325” - H30 - CE - Europe
13” - .325” - H30 - RU
16” - .325” - H25 - RU
967 05 21-36
967 05 22-33
967 05 22-16
*!3J1I8D-aeggda!
*!3J1I8D-adfeji!
*!3J1I8D-acbega!
18” - .325” - H30 - CE - Europe
15” - .325” - H30 - RU
18” - .325” - H25 - RU
967 05 21-38
967 05 22-35
967 05 22-18
*!3J1I8D-aeggeh!
*!3J1I8D-adffae!
*!3J1I8D-acbehh!
13” - .325” - H25 - CE - Europe
16” - .325” - H30 - RU
20” - .325” - H25 - RU
16” - 3/8” - H42 - CE - Europe
967 05 21-13
967 05 22-36
967 05 22-20
967 05 26-66
*!3J1I8D-agfajj!
*!3J1I8D-agfdfi!
*!3J1I8D-agfdgf!
*!3J1I8D-acbgee!
15” - .325” - H25 - CE - Europe
18” - .325” - H30 - RU
18” - 3/8” - H42 - CE - Europe
967 05 21-15
967 05 22-38
967 05 26-01
967 05 26-68
*!3J1I8D-acbdeh!
*!3J1I8D-adfgad!
*!3J1I8D-aefjgb!
*!3J1I8D-acbgfb!
16” - .325” - H25 - CE - Europe
13” - .325” - H25 - RU
15” - 3/8” - H42 - CE - Europe
20” - 3/8” - H42 - CE - Europe
967 05 21-16
967 05 22-13
967 05 26-65
967 05 26-70
*!3J1I8D-acbdfe!
*!3J1I8D-acbeeg!
*!3J1I8D-acbgdh!
52
*!3J1I8D-acbggi!
460
Chain pitch: .325". Sound level: 104 dB(A). Vibrations, front/
rear handle: 4.9 m/s²/4.3 m/s².
Engine - All markets
16"- .325 - H25 - All markets
965 03 11-01
965 03 11-16
*!3J1I8D-bdbegg!
*!3J1I8D-bdbejh!
13"- .325 - H25 - All markets
18"- .325 - H25 - All markets
965 03 11-13
965 03 11-18
*!3J1I8D-bdbehd!
*!3J1I8D-bdbfad!
15"- .325 - H25 - All markets
20"- .325 - H25 - All markets
965 03 11-15
965 03 11-20
*!3J1I8D-bdbeia!
· Air Injection
· LowVib
· X-TORQ engine
· E-TECH II
· Fuel pump
· Air Injection
· LowVib
· X-TORQ engine
· E-TECH II
· Fuel pump
*!3J1I8D-bdbfba!
455 Rancher
Chain pitch: .325". Chain pitch 2: 3/8". Recommended bar length: 3350 cm/13-20". Sound level: 104 dB(A). Noise emissions, L WA: 113 dB(A).
16" SN - .325 - H25 - All markets
965 03 01-01
965 03 01-16
*!3J1I8D-bcjihg!
*!3J1I8D-bdbebb!
13" SN - .325 - H25 - All markets
18" SN - .325 - H25 - All markets
965 03 01-13
965 03 01-18
*!3J1I8D-bdbeae!
*!3J1I8D-bdbeci!
15" SN - .325 - H25 - All markets
20" SN - .325 - H25 - All markets
15" SN - 3/8” - H42 - All markets
965 03 01-15
965 03 01-20
965 03 01-65
*!3J1I8D-bdbeae!
*!3J1I8D-bdbedf!
*!3J1I8D-bddbfg!
53
455 e-series Rancher
Chain pitch: .325". Chain pitch 2: 3/8". Recommended bar length: 3350 cm/13-20". Sound level: 104 dB(A). Noise emissions, L WA: 113 dB(A).
16" SN - .325 - H25 - All markets
965 09 27-01
965 09 27-16
*!3J1I8D-bedagd!
· Fuel pump
*!3J1I8D-beedji!
13" SN - .325 - H25 - All markets
18" SN - .325 - H25 - All markets
965 09 27-13
965 09 27-18
*!3J1I8D-beedhe!
· Air Injection
· LowVib
· X-TORQ engine
· E-TECH II
*!3J1I8D-beeeae!
15" SN - .325 - H25 - All markets
20" SN - .325 - H25 - All markets
13" SN - .325 - H30 - All markets
15" SN - .325 - H30 - All markets
965 09 27-15
965 09 27-20
965 09 27-33
965 09 27-35
*!3J1I8D-beedib!
*!3J1I8D-beeebb!
*!3J1I8D-begaii!
54
*!3J1I8D-begajf!
350
16” - .325” - CE - Europe
15” - .325” - - others
967 01 81-36
967 01 82-35
*!3J1I8D-bdccba!
16” - .325” - - others
967 01 81-01
967 01 82-36
*!3J1I8D-bdcedc!
13” - .325” - CE - Europe
18” - .325” - - others
16” - .325”- H30 - EPA - US,CA
967 01 81-33
967 01 82-38
967 01 88-36
*!3J1I8D-bdcbjh!
*!3J1I8D-bdceej!
*!3J1I8D-bdcbfj!
15” - .325” - CE - Europe
20” - .325” - - others
18” - .325” - H30 - EPA - US,CA
967 01 81-35
967 01 82-40
967 01 88-38
*!3J1I8D-bdccad!
· Fuel pump
*!3J1I8D-bdcecf!
*!3J1I8D-bdcbia!
· Air Injection
· LowVib
*!3J1I8D-bdcefg!
*!3J1I8D-bdcbgg!
18” - .325” - CE - Europe
20” - .325” - H30 - EPA - US,CA
15” - .325” - CE - Europe
967 01 81-38
967 01 88-01
967 01 88-40
967 01 89-35
*!3J1I8D-bdccch!
*!3J1I8D-bdcbci!
*!3J1I8D-bdcbhd!
*!3J1I8D-bdcaji!
Engine - - others
13” - .325” - H30 - EPA - US,CA
16” - .325” - CE - Europe
967 01 82-01
967 01 88-33
967 01 89-01
967 01 89-36
*!3J1I8D-bdceab!
*!3J1I8D-bdcbdf!
*!3J1I8D-bdcahe!
*!3J1I8D-bdcbae!
13” - .325” - - others
15” - .325” - H30 - EPA - US,CA
13” - .325” - CE - Europe
18” - .325” - CE - Europe
967 01 82-33
967 01 88-35
967 01 89-33
967 01 89-38
*!3J1I8D-bdcebi!
*!3J1I8D-bdcbec!
*!3J1I8D-bdcaib!
55
*!3J1I8D-bdcbbb!
345 e-series
Engine - others
965 09 24-01
965 09 25-01
*!3J1I8D-bedacf!
13" - SN - .325 - H30 - Others
965 09 24-33
965 09 25-33
*!3J1I8D-beefde!
15" SN - .325 - H30 - CE - Europe
15" - SN - .325 - H30 - Others
965 09 24-35
965 09 25-35
965 09 26-01
*!3J1I8D-beeejh!
*!3J1I8D-beefeb!
*!3J1I8D-bedaej!
16" SN - .325 - H30 - CE - Europe
16" - SN - .325 - H30 - Others
13" - SN - .325 - H30 - EPA - US,CA
965 09 24-36
965 09 25-36
965 09 26-33
*!3J1I8D-beefad!
· Fuel pump
*!3J1I8D-bedaab!
13" SN - .325 - H30 - CE - Europe
*!3J1I8D-beeeia!
· Air Injection
· LowVib
· Smart Start Spring-assisted starter
*!3J1I8D-beeffi!
*!3J1I8D-beefij!
18" SN - .325 - H30 - CE - Europe
18" - SN - .325 - H30 - Others
15" - SN - .325 - H30 - EPA - US,CA
18" - SN - .325 - H30 - EPA - US,CA
965 09 24-38
965 09 25-38
965 09 26-35
965 09 26-38
*!3J1I8D-beefba!
*!3J1I8D-beefgf!
*!3J1I8D-beefjg!
*!3J1I8D-beegbj!
20" SN - .325 - H30 - CE - Europe
20" - SN - .325 - H30 - Others
16" - SN - .325 - H30 - EPA - US,CA
20" - SN - .325 - H30 - EPA - US,CA
965 09 24-40
965 09 25-40
965 09 26-36
965 09 26-40
*!3J1I8D-beefch!
*!3J1I8D-beefhc!
*!3J1I8D-beegac!
56
*!3J1I8D-beegcg!
345 e-series
Engine - Nordic
18" - .325 - H30 - CE - Nordic
967 01 68-01
967 01 68-38
*!3J1I8D-bdccjg!
Engine - CE
967 01 68-33
965 09 68-01
*!3J1I8D-beegdd!
15" - .325 - H30 - CE - Nordic
13" - .325 - H30 - CE
16" - .325 - H30 - CE
967 01 68-35
965 09 68-33
965 09 68-36
*!3J1I8D-bdcdbj!
*!3J1I8D-beegea!
*!3J1I8D-beegge!
16" - .325 - H30 - CE - Nordic
15" - .325 - H30 - CE
18" - .325 - H30 - CE
967 01 68-36
965 09 68-35
965 09 68-38
*!3J1I8D-bdcdcg!
· Fuel pump
*!3J1I8D-bdcddd!
13" - .325 - H30 - CE - Nordic
*!3J1I8D-bdcdac!
· Air Injection
· LowVib
*!3J1I8D-beegfh!
*!3J1I8D-beeghb!
340 e-series
13” - .325” - - others
967 01 41-01
967 01 42-33
*!3J1I8D-bdbhih!
15” - .325” - - others
967 01 41-33
967 01 42-35
*!3J1I8D-bdbjaj!
15” - .325” - CE - Europe
16” - .325” - - others
13” - .325” - EPA - US,CA
967 01 41-35
967 01 42-36
967 01 43-33
*!3J1I8D-bdbiaa!
*!3J1I8D-bdbjbg!
*!3J1I8D-bdbjfe!
16” - .325” - CE - Europe
18” - .325” - - others
15” - .325” - EPA - US,CA
967 01 41-36
967 01 42-38
967 01 43-35
*!3J1I8D-bdfdeb!
· Fuel pump
*!3J1I8D-bdbijd!
13” - .325” - CE - Europe
*!3J1I8D-bdbidb!
· Air Injection
· LowVib
*!3J1I8D-bdbjcd!
*!3J1I8D-bdbjgb!
Engine - - others
16” - .325” - EPA - US,CA
18” - .325” - EPA - US,CA
967 01 42-01
967 01 43-01
967 01 43-36
967 01 43-38
*!3J1I8D-bdbiig!
*!3J1I8D-bdbjeh!
*!3J1I8D-bdbjhi!
57
*!3J1I8D-bdbjif!
340
15” - .325” - - others
967 01 31-01
967 01 32-35
*!3J1I8D-adjegf!
16” - .325” - - others
967 01 31-33
967 01 32-36
*!3J1I8D-adjfge!
15” - .325” - CE - Europe
18” - .325” - - others
16” - .325” - EPA - US,CA
967 01 31-35
967 01 32-38
967 01 33-36
*!3J1I8D-adjeij!
*!3J1I8D-adjfea!
13” - .325” - CE - Europe
*!3J1I8D-adjehc!
· Air Injection
· LowVib
*!3J1I8D-adjfhb!
*!3J1I8D-aegdea!
16” - .325” - CE - Europe
20” - .325” - - others
18” - .325” - EPA - US,CA
15” - .325” - - JP only
967 01 31-36
967 01 32-40
967 01 33-38
967 01 38-35
*!3J1I8D-adjejg!
*!3J1I8D-afhddj!
*!3J1I8D-adjgbi!
*!3J1I8D-afhdga!
18” - .325” - CE - Europe
20” - .325” - EPA - US,CA
16” - .325” - - JP only
967 01 31-38
967 01 33-01
967 01 33-40
967 01 38-36
*!3J1I8D-adjfac!
*!3J1I8D-adjfii!
*!3J1I8D-afhdcc!
*!3J1I8D-afhdhh!
Engine - - others
13” - .325” - EPA - US,CA
Engine - - JP only
18” - .325” - - JP only
967 01 32-01
967 01 33-33
967 01 38-01
967 01 38-38
*!3J1I8D-adjfbj!
*!3J1I8D-adjfjf!
*!3J1I8D-afhdeg!
*!3J1I8D-afhdie!
13” - .325” - - others
15” - .325” - EPA - US,CA
13” - .325” - - JP only
20” - .325” - - JP only
967 01 32-33
967 01 33-35
967 01 38-33
967 01 38-40
*!3J1I8D-adjfcg!
*!3J1I8D-adjgab!
*!3J1I8D-afhdfd!
58
*!3J1I8D-afhdjb!
336
Chain pitch 2: 3/8". Recommended bar length: 33-40 cm/13-16".
· Air Injection
· LowVib
· Fuel pump
16" - .325 - H30 - CE - Europe
14" - 3/8 - S36X - JP only
965 02 11-24
*!3J1I8D-ahcbad!
965 02 12-36
*!3J1I8D-ahcbeb!
18" - .325 - H30 - CE - Europe
965 02 12-01
*!3J1I8D-ahcbba!
13" - .325 - H30 - CE - Europe
965 02 12-33
*!3J1I8D-ahcbch!
965 02 12-38
*!3J1I8D-ahcbfi!
15" - .325 - H30 - EPA - US - exc. Calif. CA,
other markets
965 02 13-01
965 02 13-35
*!3J1I8D-ahcbgf!
*!3J1I8D-ahcbij!
13" - .325 - H30 - EPA - US - exc.Calif. CA,
16" - .325 - H30 - EPA - US - exc. Calif. CA.
18" - .325 - H30 - EPA - US - exc. Calif. CA.
15" - .325 - H30 - CE - Europe
other markets
other markets
other markets
965 02 12-35
965 02 13-33
965 02 13-36
965 02 13-38
*!3J1I8D-ahcbde!
*!3J1I8D-ahcbhc!
*!3J1I8D-ahcbjg!
142 e-series
15" - .325
952 80 20-40
#!024761-ahebei!
15" - .325 - Europe/Scandinavia
15" - .325 - Russia
952 80 21-41
952 80 21-37
*!3J1I8D-bedged!
*!3J1I8D-bedgaf!
59
· Air Injection
· LowVib
*!3J1I8D-ahccac!
137 e-series
13" - .325
952 80 20-38
#!024761-ahebce!
15" - .325
15" - .325
952 80 20-39
952 80 21-36
#!024761-ahebdb!
*!3J1I8D-bedfjj!
60
· Air Injection
· LowVib
61
Specifications for chain saws
Cylinder displacement
Power
3 1 20 X P
395 XP
395X PG
390 XP
118.8 cm³ /7.3 cu.inch
93.6 cm³ /5.7 cu.inch
93.6 cm³ /5.7 cu.inch
88 cm³ /5.4 cu.inch
4.9 kW /6.6 hp
4.8 kW /6.5 hp
6.2 kW /8.4 hp
Power (CE)
4.9 kW /6.6 hp
Fuel tank volume
1.25l /2.64 US pint
0.9l /1.9 US pint
0.9l /1.9 US pint
0.9l /1.9 US pint
Oil tank volume
0.70l /1.48 US pint
0.5l /1.1 US pint
0.5l /1.1 US pint
0.5l /1.06 US pint
.404"
3/8 / .404"
3/8 / .404"
3/8"
Chain pitch
Chain pitch 2
Recommended bar length
60-105 cm /24-42"
45-90 cm /18-36"
45-90 cm /18-36"
45-70 cm /18-28"
Sound level
101 dB(A)
102 dB(A)
102 dB(A)
107.5 dB(A)
Noise emissions, L WA
116 dB(A)
115 dB(A)
115 dB(A)
117 dB(A)
7.7 m/s² /10.6 m/s²
6.5 m/s² /10.2 m/s²
6.5 m/s² /10.2 m/s²
5.8 m/s² /7.0 m/s²
10.4 kg /22.9 lbs
7.9 kg /17.4 lbs
8.1 kg /17.8 lbs
7.1 kg /15.7 lbs
Air Injection
–
LowVib
•
•
•
•
•
•
•
•
•
•
•
X-TORQ engine
–
–
–
–
Smart Start Automatic decompression valve
–
–
–
–
Smart Start decompression valve
•
•
•
•
Smart Start Spring-assisted starter
–
–
–
–
E-TECH
–
–
–
–
E-TECH II
–
–
–
–
Combined choke / stop control
–
–
–
–
Quick release on air filter cover
•
•
•
•
Quick release on air filter
–
–
–
–
Heavy duty air filter
–
–
–
–
Chain tensioning from the side
–
–
–
Adjustable oil pump
•
•
•
•
•
•
–
–
–
Vibration-dampened carburettor
–
•
•
•
Assymetrical rear handle
–
–
–
–
Heated handles
–
–
•
–
Heated carburettor
–
–
–
–
Vibrations, front/rear handle
Weight excl. cutting equipment
XP - High performance engine
Oil pump with override
Compensating carburettor
•
–
–
–
Fuel pump
–
–
–
–
Integrated rope holder
–
–
–
–
Inertia-activated chain brake
•
•
•
•
(•) option
62
390 X P G
38 5 X P
38 5 X P G
37 2 X P
372XPG
5 75 X P
84.7 cm³ /5.2 cu.inch
84.7 cm³ /5.2 cu.inch
70.7 cm³ /4.3 cu.inch
70.7 cm³ /4.3 cu.inch
73.5 cm³ /4.48 cu.inch
4.8 kW /6.5 hp
4.6 kW /6.3 hp
4.6 kW /6.3 hp
3.9 kW /5.3 hp
3.9 kW /5.4 hp
4.0 kW /5.4 hp
0.9l /1.9 US pint
0.9l /1.9 US pint
0.9l /1.9 US pint
0.77l /1.62 US pint
0.77l /1.62 US pint
0.7l /1.48 US pint
0.5l /1.06 US pint
0.5l /1.06 US pint
0.5l /1.06 US pint
0.40l /0.84 US pint
0.40l /0.84 US pint
0.37l /0.78 US pint
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
45-70 cm /18-28"
45-70 cm /18-28"
45-70 cm /18-28"
38-70 cm /15-28"
38-70 cm /15-28"
40-80 cm /16-32"
107.5 dB(A)
102 dB(A)
102 dB(A)
103 dB(A)
103 dB(A)
107 dB(A)
117 dB(A)
114 dB(A)
114 dB(A)
115 dB(A)
115 dB(A)
115 dB(A)
5.8 m/s² /7.0 m/s²
5.7 m/s² /8.0 m/s²
5.7 m/s² /8.0 m/s²
3.5 m/s² /4.0 m/s²
3,5 m/s² /4,0 m/s²
3.2 m/s² /3.4 m/s²
7.2 kg /15.9 lbs
7.0 kg /15.4 lbs
7.2 kg /15.9 lbs
6.1 kg /13.4 lbs
6.3 kg /13.8 lbs
6.8 kg /14.9 lbs
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
•
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
–
–
•
•
•
–
•
•
•
•
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
–
–
–
–
–
•
•
•
•
–
•
•
–
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
–
(•) option
63
–
–
–
5 75 XP G
365
570
3 59
73.5 cm³ /4.48 cu.inch
65.1 cm³ /4.0 cu.inch
67.9 cm³ /4.14 cu.inch
59.0 cm³ /3.6 cu.inch
4.0 kW /5.4 hp
3.4 kW /4.6 hp
3.6 kW /4.9 hp
2.9 kW /3.9 hp
Fuel tank volume
0.7l /1.48 US pint
0.77l /1.62 US pint
0.7l /1.48 US pint
0.68l /1.44 US pint
Oil tank volume
0.37l /0.78 US pint
0.40l /0.84 US pint
0.37l /0.78 US pint
0.38l /0.80 US pint
3/8"
3/8"
3/8"
.325 / 3/8"
Power
Power (CE)
Chain pitch
Chain pitch 2
40-80 cm /16-32"
38-70 cm /15-28"
40-80 cm /16-32"
33-50 cm /13-20"
Sound level
107 dB(A)
102.5 dB(A)
107 dB(A)
101 dB(A)
115 dB(A)
114 dB(A)
115 dB(A)
114 dB(A)
3.2 m/s² /3.4 m/s²
3.6 m/s² /3.5 m/s²
3,2 m/s² /3,4 m/s²
3.9 m/s² /4.2 m/s²
6.8 kg /14.9 lbs
6.0 kg /13.0 lbs
6.8 kg /14.9 lbs
5.5 kg /12.1 lbs
•
•
•
•
•
•
•
•
–
–
–
–
X-TORQ engine
•
–
•
–
–
–
–
–
•
•
•
•
–
–
–
–
E-TECH
–
–
–
–
E-TECH II
•
•
•
•
–
–
•
•
•
•
•
•
•
•
•
–
–
–
–
•
•
•
•
•
•
•
•
–
–
–
–
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
Fuel pump
–
–
–
–
–
–
–
–
•
•
•
•
Air Injection
LowVib
Adjustable oil pump
Heated handles
Heated carburettor
–
–
(•) option
64
–
3 59 E - T E C H
3 59G
3 59 G E - T E C H
357XP
3 5 7 X P E- T E C H
357XPG
59.0 cm³ /3.6 cu.inch
59.0 cm³ /3.6 cu.inch
59.0 cm³ /3.6 cu.inch
56.5 cm³ /3.45 cu.inch
56.5 cm³ /3.45 cu.inch
56.5 cm³ /3.45 cu.inch
2.9 kW /3.9 hp
2.9 kW /3.9 hp
2.9 kW /3.9 hp
3.2 kW /4.4 hp
3.2 kW /4.4 hp
3.2 kW /4.4 hp
0.68l /1.43 US pint
0.68l /1.44 US pint
0.68l /1.43 US pint
0.68l /1.44 US pint
0.68l /1.43 US pint
0.68l /1.44 US pint
0.38l /0.80 US pint
0.38l /0.80 US pint
0.38l /0.80 US pint
0.38l /0.80 US pint
0.38l /0.80 US pint
0.38l /0.80 US pint
.325 / 3/8"
.325 / 3/8"
.325 / 3/8"
.325 / 3/8"
.325 3/8"
.325 / 3/8"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
100 dB(A)
101 dB(A)
100 dB(A)
101 dB(A)
100 dB(A)
101 dB(A)
112 dB(A)
114 dB(A)
112 dB(A)
114 dB(A)
112 dB(A)
114 dB(A)
3.9 m/s² /4.2 m/s²
3.9 m/s² /4.2 m/s²
3.9 m/s² /4.2 m/s²
3.9 m/s² /4.2 m/s²
3.9 m/s² /4.2 m/s²
3.9 m/s² /4.2 m/s²
5.5 kg /12.1 lbs
5.5 kg /12.1 lbs
5.6 kg /12.3 lbs
5.5 kg /12.1 lbs
5.5 kg /12.1 lbs
5.5 kg /12.1 lbs
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
•
–
•
–
•
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
–
•
–
•
(• )
–
–
(• )
•
–
•
•
•
–
–
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
(•) option
65
357XPG E-TECH
35 3
353
353G
56.5 cm³ /3.45 cu.inch
51.7 cm³ /3.2 cu.inch
51.7 cm³ /3.2 cu.inch
51.7 cm³ /3.2 cu.inch
3.2 kW /4.4 hp
2.4 kW /3.3 hp
2.4 kW /3.3 hp
2.4 kW /3.3 hp
Fuel tank volume
0.68l /1.43 US pint
0.50l /1.06 US pint
0.50l /1.06 US pint
0.50l /1.06 US pint
Oil tank volume
0.38l /0.80 US pint
0.28l /0.59 US pint
0.28l /0.59 US pint
0.28l /0.59 US pint
.325 / 3/8"
.325"
.325"
.325"
Power
Power (CE)
Chain pitch
Chain pitch 2
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
Sound level
100 dB(A)
102 dB(A)
102 dB(A)
102 dB(A)
112 dB(A)
113 dB(A)
113 dB(A)
113 dB(A)
3.9 m/s² /4.2 m/s²
3.1 m/s² /3.2 m/s²
3.1 m/s² /3.2 m/s²
3.1 m/s² /3.2 m/s²
5.6 kg /12.3 lbs
5.0 kg /11.0 lbs
5.2 kg /11.4 lbs
5.1 kg /11.2 lbs
•
•
•
•
•
•
•
•
•
–
–
–
X-TORQ engine
–
–
–
–
–
–
–
–
•
•
•
•
–
–
–
–
E-TECH
•
–
–
–
E-TECH II
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
•
•
•
•
•
•
•
•
–
–
–
–
•
•
•
•
–
–
–
–
Heated handles
•
•
–
–
•
–
–
(• )
–
–
–
–
Fuel pump
–
–
–
–
–
–
–
–
•
•
•
•
Air Injection
LowVib
Adjustable oil pump
Heated carburettor
(•) option
66
353G
3 5 3 E- T E C H
353G E-TECH
3 5 3 G E - T EC H
346XP
346XP
51.7 cm³ /3.2 cu.inch
51.7 cm³ /3.2 cu.inch
51.7 cm³ /3.2 cu.inch
51.7 cm³ /3.2 cu.inch
45.0 cm³ /2.7 cu.inch
45.0 cm³ /2.7 cu.inch
2.4 kW /3.3 hp
2.4 kW /3.3 hp
2.4 kW /3.3 hp
2.4 kW /3.3 hp
2.5 kW /3.4 hp
2.5 kW /3.4 hp
0.50l /1.06 US pint
0.50l /1.06 US pint
0.50l /1.06 US pint
0.50l /1.06 US pint
0.50l /1.06 US pint
0.50l /1.06 US pint
0.28l /0.59 US pint
0.28l /0.59 US pint
0.28l /0.59 US pint
0.28l /0.59 US pint
0.28l /0.59 US pint
0.28l /0.59 US pint
.325"
.325"
.325"
.325"
.325"
.325"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
102 dB(A)
102 dB(A)
102 dB(A)
102 dB(A)
101 dB(A)
101 dB(A)
113 dB(A)
112 dB(A)
112 dB(A)
112 dB(A)
114 dB(A)
114 dB(A)
3.1 m/s² /3.2 m/s²
3.1 m/s² /3.2 m/s²
3.1 m/s² /3.2 m/s²
3.1 m/s² /3.2 m/s²
3.3 m/s² /3.4 m/s²
3.3 m/s² /3.4 m/s²
5.3 kg /11.7 lbs
5.0 kg /11.0 lbs
5.1 kg /11.2 lbs
5.3 kg /11.7 lbs
4.8 kg /10.6 lbs
5.1 kg /11.2 lbs
•
•
•
•
•
•
•
•
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
–
–
–
–
–
–
–
–
–
•
•
•
–
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
•
–
•
•
–
–
(• )
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
(•) option
67
3 46 X P G
34 6 X PG
3 4 6 X P E- T E C H
34 6 X P G E - T E C H
45.0 cm³ /2.7 cu.inch
45.0 cm³ /2.7 cu.inch
45.0 cm³ /2.7 cu.inch
45.0 cm³ /2.7 cu.inch
2.5 kW /3.4 hp
2.5 kW /3.4 hp
2.5 kW /3.4 hp
2.5 kW /3.4 hp
Fuel tank volume
0.50l /1.06 US pint
0.50l /1.06 US pint
0.50l /1.06 US pint
0.50l /1.06 US pint
Oil tank volume
0.28l /0.59 US pint
0.28l /0.59 US pint
0.28l /0.59 US pint
0.28l /0.59 US pint
.325"
.325"
.325"
.325"
Power
Power (CE)
Chain pitch
Chain pitch 2
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
33-50 cm /13-20"
Sound level
101 dB(A)
101 dB(A)
101 dB(A)
101 dB(A)
114 dB(A)
114 dB(A)
113 dB(A)
113 dB(A)
3.3 m/s² /3.4 m/s²
3.3 m/s² /3.4 m/s²
3.3 m/s² /3.4 m/s²
3.3 m/s² /3.4 m/s²
4.9 kg /10.8 lbs
5.2 kg /11.4 lbs
4.9 kg /10.8 lbs
5.0 kg /11.0 lbs
•
•
•
•
•
•
•
•
•
•
•
•
X-TORQ engine
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
E-TECH
–
–
•
•
E-TECH II
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
•
•
•
•
•
•
•
•
–
–
–
–
•
•
•
•
–
–
–
–
Air Injection
LowVib
Adjustable oil pump
•
•
–
•
(• )
(• )
–
(• )
–
–
–
–
Fuel pump
–
–
–
–
–
–
–
–
•
•
•
•
Heated handles
Heated carburettor
(•) option
68
34 6X PG E - T E C H
339 XP
338 XP T
3 34 T
55
460
45.0 cm³ /2.7 cu.inch
39.0 cm³ /2.4 cu.inch
39.0 cm³ /2.4 cu.inch
35.2 cm³ /2.2 cu.inch
53.2 cm³ /3.2 cu.inch
60.3 cm³ /3.68 cu.inch
2.5 kW /3.4 hp
1.8 kW /2.4 hp
1.7 kW /2.3 hp
1.5 kW /2.0 hp
2.5 kW /3.4 hp
2.7 kW /3.7 hp
0.50l /1.06 US pint
0.36l /0.76 US pint
0.34l /0.72 US pint
0.34l /0.72 US pint
0.60l /1.27 US pint
0.44l /0.9 US pint
0.28l /0.59 US pint
0.16l /0.34 US pint
0.15l /0.32 US pint
0.15l /0.32 US pint
0.30l /0.63 US pint
0.32l /0.7 US pint
.325"
.325"
3/8"
3/8"
.325 / 3/8"
.325"
33-50 cm /13-20"
33-45 cm /13-18"
30-40 cm /12-16"
30-36 cm /12-14"
33-50 cm /13-20"
101 dB(A)
99 dB(A)
100 dB(A)
100 dB(A)
98 dB(A)
113 dB(A)
112 dB(A)
112 dB(A)
112 dB(A)
111 dB(A)
3.3 m/s² /3.4 m/s²
4.3 m/s² /5.1 m/s²
3.0 m/s² /3.5 m/s²
3.0 m/s² /3.5 m/s²
4.9 m/s² /7.2 m/s²
4.9 m/s² /4.3 m/s²
5.2 kg /11.4 lbs
4.0 kg /8.8 lbs
3.5 kg /7.7 lbs
3.5 kg /7.7 lbs
5.2 kg /11.4 lbs
5.8 kg /12.8 lbs
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
•
–
•
•
–
–
–
–
–
–
–
–
•
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
•
•
•
–
•
•
–
•
•
•
•
•
–
–
–
–
–
–
•
–
–
–
–
–
–
•
•
•
•
•
•
–
–
•
•
–
–
104 dB(A)
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
•
•
•
–
–
–
–
–
(• )
–
–
–
–
–
–
–
–
–
–
–
–
•
–
–
–
•
•
•
•
•
•
–
•
•
•
–
•
•
(•) option
69
4 55 Ra n che r
455 e - ser i es
R a nch er
350
3 45 e - ser i es
55.5 cm³ /3.4 cu.inch
55.5 cm³ /3.4 cu.inch
49.4 cm³ /3.0 cu.inch
45.0 cm³ /2.7 cu.inch
2.6 kW /3.5 hp
2.6 kW /3.5 hp
2.3 kW /3.1 hp
2.2 kW /3.0 hp
Fuel tank volume
0.44l /0.9 US pint
0.44l /0.9 US pint
0.5l /1.06 US pint
0.50l /1.06 US pint
Oil tank volume
Power
Power (CE)
0.32l /0.7 US pint
0.32l /0.7 US pint
0.26l /0.55 US pint
0.25l /0.52 US pint
Chain pitch
.325"
.325"
.325"
.325"
Chain pitch 2
3/8"
3/8"
33-50 cm /13-20"
33-50 cm /13-20"
33-45 cm /13-18"
33-45 cm /13-18"
Sound level
104 dB(A)
104 dB(A)
100 dB(A)
100.5 dB(A)
113 dB(A)
113 dB(A)
113 dB(A)
113 dB(A)
3.4 m/s² /4.5 m/s²
3.4 m/s² /4.5 m/s²
2.5 m/s² /2.6 m/s²
3.1 m/s² /3.5 m/s²
5.8 kg /13.2 lbs
5.9 kg /13.0 lbs
4.8 kg /10.6 lbs
4.8 kg /10.6 lbs
•
•
•
•
•
•
•
•
–
–
–
–
X-TORQ engine
•
•
–
–
–
–
–
–
•
•
•
–
–
–
•
•
E-TECH
–
–
–
–
E-TECH II
•
•
•
•
–
–
•
•
–
–
–
–
•
•
•
•
–
–
–
–
•
–
Adjustable oil pump
–
•
•
–
–
–
–
–
–
•
•
•
•
•
•
–
–
Heated handles
–
–
–
–
Heated carburettor
–
–
–
–
–
–
–
–
Fuel pump
•
•
•
•
–
–
–
–
•
•
•
•
Air Injection
LowVib
(•) option
70
–
3 45 e -s er i es
3 40 e -s er i es
3 40
336
1 42 e - se ri e s
1 37 e - s eri e s
45.0 cm³ /2.7 cu.inch
40.8 cm³ /2.5 cu.inch
40.8 cm³ /2.5 cu.inch
35.2 cm³ /2.2 cu.inch
40.2 cm³ /2.4 cu.inch
36.3 cm³ /2.2 cu.inch
2.2 kW /3.0 hp
2.0 kW /2.7 hp
2.0 kW /2.7 hp
1.5 kW /2.0 hp
1.9 kW /2.6 hp
1.6 kW /2.2 hp
0.50l /1.06 US pint
0.50l /1.06 US pint
0.50l /1.06 US pint
0.36l /0.76 US pint
0.41l /0.85 US pint
0.41l /0.85 US pint
0.25l /0.52 US pint
0.25l /0.52 US pint
0.25l /0.52 US pint
0.16l /0.34 US pint
0.20l /0.42 US pint
0.20l /0.42 US pint
.325"
.325"
.325"
.325"
.325"
.325"
33-38 cm /13-15"
3/8"
33-45 cm /13-18"
33-45 cm /13-18"
33-45 cm /13-18"
33-40 cm /13-16"
33-38 cm /13-15"
100.5 dB(A)
100.5 dB(A)
100.5 dB(A)
99 dB(A)
98.5 dB(A)
98 dB(A)
113 dB(A)
113 dB(A)
113 dB(A)
112 dB(A)
118 dB(A)
118 dB(A)
3.1 m/s² /3.5 m/s²
2.8 m/s² /2.8 m/s²
2.8 m/s² /2.8 m/s²
4.3 m/s² /5.1 m/s²
4.8 m/s² /6.5 m/s²
4.9 m/s² /7.7 m/s²
4.8 kg /10.6 lbs
4.8 kg /10.6 lbs
4.7 kg /10.4 lbs
3.8 kg /8.4 lbs
4.6 kg /10.1 lbs
4.6 kg /10.1 lbs
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
–
–
–
–
–
•
–
–
•
•
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
–
–
–
–
–
–
•
–
–
•
•
•
–
–
–
–
–
–
–
–
–
•
•
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
–
•
–
–
–
–
–
–
–
–
•
•
•
•
•
•
(•) option
71
Pole saws
323P4
Maximum power speed: 9000 rpm. Fuel tank volume: 0.5l/1 US pint.
Chain pitch: 3/8". Recommended bar length: 10-12".
Vibrations idling front handle min/max: 1.9 m/s²/1.9 m/s².
Vibrations idling rear handle min/max: 1.3 m/s²/1.3 m/s².
Vibrations top speed front handle min/max: 3.1 m/s²/3.1 m/s².
Vibrations top speed rear handle min/max: 4.0 m/s²/4.0 m/s².
Noise emission, L WA: 107 dB(A). Sound level, min/max: 94 dB
(A)/94 dB(A). Shaft length: 175 cm/68.9". Weight: 5.0 kg/11.0 lbs.
· Smart Start
· Vibration-dampened cutting head
· Adjustable and automatic chain lubrication
· Fuel pump
All ex US50
953 04 41-01
*!3J1I8D-afhbce!
326P4
Maximum power speed: 9000 rpm. Fuel tank volume: 0.5l/1.1 US pint.
Sound level, min/max: 94 dB(A)/94 dB(A). Shaft length: 175 cm/68.9".
Weight: 5.4 kg/11.9 lbs.
US50 ex Lowes
953 04 22-01
*!3J1I8D-agidjh!
72
· E-TECH II
· Adjustable and automatic chain lubrication
· Fuel pump
325P5x
Noise emission, L WA: 105 dB(A). Sound level, min/max: 92 dB
(A)/92 dB(A). Shaft length: 275 cm/108.3". Weight: 5.9 kg/13.0 lbs.
· Smart Start
· E-TECH
· Two-piece shaft
· Adjustable and automatic chain
lubrication
· Fuel pump
· E-TECH II
· Two-piece shaft
· Adjustable and automatic chain
lubrication
· Fuel pump
All ex US50
953 04 11-01
*!3J1I8D-ahbgej!
326P5x
Sound level, min/max: 92 dB(A)/92 dB(A). Shaft length: 275 cm/108.3".
US50 ex Lowes
CAN
953 04 32-01
953 04 31-01
*!3J1I8D-ahaige!
*!3J1I8D-aicfcc!
73
Specifications for pole saws
Power
Maximum power speed
Fuel tank volume
Chain pitch
32 3 P4
326P 4
32 5P 5x
326 P5x
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
9000 rpm
9000 rpm
9000 rpm
8400 rpm
0.5l /1 US pint
0.5l /1.1 US pint
0.5l /1 US pint
0.5l /1 US pint
3/8"
3/8"
3/8"
3/8"
10-12"
10-12"
10-12"
10-12"
Vibrations idling front handle min/max
1.9 m/s² /1.9 m/s²
2.2 m/s² /2.2 m/s²
1.6 m/s² /1.6 m/s²
1.2 m/s² /1.2 m/s²
Vibrations idling rear handle min/max
1.3 m/s² /1.3 m/s²
2.6 m/s² /2.6 m/s²
1.2 m/s² /1.2 m/s²
1.6 m/s² /1.6 m/s²
Vibrations top speed front handle min/max
3.1 m/s² /3.1 m/s²
6.6 m/s² /6.6 m/s²
7.6 m/s² /7.6 m/s²
8.6 m/s² /8.6 m/s²
Vibrations top speed rear handle min/max
4.0 m/s² /4.0 m/s²
7.5 m/s² /7.5 m/s²
8.6 m/s² /8.6 m/s²
7.6 m/s² /7.6 m/s²
Noise emission, L WA
107 dB(A)
Sound level, min/max
94 dB(A) /94 dB(A)
94 dB(A) /94 dB(A)
92 dB(A) /92 dB(A)
92 dB(A) /92 dB(A)
Shaft length
175 cm /68.9"
175 cm /68.9"
275 cm /108.3"
275 cm /108.3"
Weight
105 dB(A)
5.0 kg /11.0 lbs
5.4 kg /11.9 lbs
5.9 kg /13.0 lbs
6.2 kg /13.7 lbs
Smart Start
•
–
–
E-TECH
–
–
•
•
•
•
•
•
•
E-TECH II
–
•
–
Two-piece shaft
–
–
Vibration-dampened cutting head
•
•
•
•
•
•
•
•
•
•
Adjustable and automatic chain lubrication
Fuel pump
(•) option
74
–
Electric chain saws
321 Electric
Voltage: 220-240V. Power rating: 2 000W.
Oil tank volume: 0.10l/0.21 US pint. Recommended bar length: 3540 cm/14-16". Chain pitch: 3/8". Noise emissions, L WA: 104 dB(A).
Sound level: 95 dB(A). Vibrations front/rear handle: 4.4 m/s²/5.4 m/s².
Weight without cutting equipment: 4.4 kg/9.7 lbs.
14" - Scandinavia
16" - CH
967 54 71-14
967 54 72-66
*!3J1I8D-aidbeh!
14" - UK
967 54 71-64
967 54 73-74
*!3J1I8D-aidcai!
16" - Europe
16" - UK
967 54 71-66
967 54 73-76
*!3J1I8D-aidbhi!
*!3J1I8D-aidcbf!
14" - CH
14" - AU,NZ
16" - AU,NZ
967 54 72-64
967 54 74-74
967 54 74-76
*!3J1I8D-aidbif!
· Chain catcher stud
· Right-hand guard
*!3J1I8D-aidbjc!
14" - Europe
*!3J1I8D-aidbfe!
· Soft start
· Electronic overload protection
· Slim saw body
· Oil level window
*!3J1I8D-aidccc!
*!3J1I8D-aidcdj!
317 Electric
Sound level: 95 dB(A). Vibrations front/rear handle: 4.4 m/s²/5.4 m/s².
Weight without cutting equipment: 4.4 kg/9.7 lbs.
· Slim saw body
· Oil level window
14" - Scandinavia
967 54 31-14
*!3J1I8D-aidaig!
14" - Europe
14" - UK
967 54 31-64
967 54 33-74
*!3J1I8D-aidajd!
*!3J1I8D-aidbcd!
14" - CH
14" - AU,NZ
967 54 32-64
967 54 34-74
*!3J1I8D-aidbaj!
*!3J1I8D-aidbda!
75
· Right-hand guard
316 Electric
Sound level: 87.5 dB(A). Vibrations front/rear handle: 4.0 m/s²/5.0 m/
s². Weight without cutting equipment: 3.7 kg/8.2 lbs.
· Slim saw body
· Oil level window
14” - 3/8” - US,CA
967 54 65-24
*!3J1I8D-aefchf!
16” - 3/8” - US,CA
16" - 3/8" - JP
967 54 65-26
967 54 65-54
*!3J1I8D-aefcic!
*!3J1I8D-achedb!
76
· Right-hand guard
Specifications for electric chain saws
321 E l e c t r ic
317 Electric
3 16 E l e c t r i c
220-240V
220-240V
110-120V
2 000W
1 700W
1 600W
Oil tank volume
0.10l /0.21 US pint
0.10l /0.21 US pint
0.10l /0.21 US pint
35-40 cm /14-16"
35-40 cm /14-16"
35-40 cm /14-16"
3/8"
3/8"
3/8"
104 dB(A)
104 dB(A)
103 dB(A)
Sound level
95 dB(A)
95 dB(A)
87.5 dB(A)
4.4 m/s² /5.4 m/s²
4.4 m/s² /5.4 m/s²
4.0 m/s² /5.0 m/s²
4.4 kg /9.7 lbs
4.4 kg /9.7 lbs
3.7 kg /8.2 lbs
•
•
•
•
•
•
•
–
–
–
–
•
•
•
•
•
•
•
•
•
•
Voltage
Power rating
Chain pitch
Vibrations front/rear handle
Weight without cutting equipment
Soft start
Electronic overload protection
Slim saw body
Oil level window
Chain catcher stud
Right-hand guard
(•) option
77
78
* = Solid bar with .404 chain pitch on 390XP
is an optional on certain markets.
79
Bars
Laminated bars with nose wheel
The gentle curve and small nose radius reduce the risk of kickback and
facilitate good cutting control. Bars are epoxy coated to protect against
scratches and corrosion. Available with .325 inch pitch in lengths 13 inch
to 20 inch and with 3/8 inch pitch in lengths 15 inch to 20 inch.
10"/ 40DL/ 3/8" MINI Small bar mount, 1,3 mm
16“ / 56DL/ 3/8" MINI Small bar mount 1,3 mm
16” / 60DL/ 3/8” Large bar mount 1,5 mm
501 95 92-40
501 95 92-56
508 91 31-60
*!3J1I8D-afgjfa!
*!3J1I8D-adfjdb!
*!3J1I8D-achjib!
10"/ 40DL/ 3/8" MINI Small bar mount 1,1 mm
16“ / 60DL/ 3/8" Small bar mount 1,5 mm
501 95 95-40
501 95 92-52
508 91 41-60
*!3J1I8D-aiaiih!
*!3J1I8D-adfjce!
*!3J1I8D-achjgh!
11“ / 52DL / .325“ Small bar mount 1,5 mm
14"/ 52 DL/ 3/8" MINI Smal lbar mount 1,3 mm
16" / 66DL / .325" Small bar mount 1,5 mm
501 95 65-52
501 95 96-52
508 91 21-66
*!3J1I8D-acjdaf!
*!3J1I8D-afeceg!
*!3J1I8D-achjdg!
15“ / 56DL/ 3/8" Large bar mount 1,5 mm
501 95 92-45
508 91 31-56
501 95 96-56
*!3J1I8D-adfjbh!
*!3J1I8D-achjhe!
*!3J1I8D-aiaifg!
15“ / 56DL/ 3/8“ Small bar mount 1,5 mm
16“ / 66DL / .325" PIXEL Small bar mount 1,3 mm
501 95 95-45
508 91 41-56
508 92 61-66
*!3J1I8D-aiaiha!
*!3J1I8D-achjfa!
*!3J1I8D-achijj!
18“ / 68DL/ 3/8“ Large bar mount 1,5 mm
501 95 96-45
508 91 21-64
508 91 31-68
*!3J1I8D-afeejj!
*!3J1I8D-achjcj!
*!3J1I8D-achjji!
13" / 56DL / .325 Small bar mount 1,5 mm
15"/ 64DL/ .325" Small bar mount 1,5 mm
18"/ 68DL/ 3/8" Small bar mount 1,5 mm
508 91 21-56
508 97 21-64
508 91 41-68
*!3J1I8D-achjbc!
*!3J1I8D-bdgcbi!
*!3J1I8D-afbgij!
13“ / 56DL / .325 PIXEL Small bar mount 1,3 mm
15"/ 64DL/ .325" Large bar mount 1,5 mm
18"/ 68DL/ 3/8" Large bar mount 1,5 mm
508 92 61-56
537 02 66-01
537 02 67-01
*!3J1I8D-achihf!
*!3J1J9D-bghgfg!
*!3J1I8D-bghggd!
13"/ 56DL/ .325" PIXEL Small bar mount 1,3 mm
15“ / 64DL/ .325" PIXEL Small bar mount 1,3 mm
20" / 72DL/ 3/8" Small bar mount 1,3 mm
508 98 61-56
508 92 61-64
508 92 94-72
*!3J1I8D-bdgbjf!
*!3J1I8D-achiic!
*!3J1I8D-bcjicb!
15"/ 64DL/ .325" PIXEL Small bar mount 1,3 mm
537 02 65-01
508 98 61-64
508 91 21-72
*!3J1I8D-bghgej!
*!3J1I8D-bdgccf!
80
*!3J1I8D-achjed!
20" /72DL/ 3/8" Small bar mount 1,3 mm
508 92 61-72
508 92 91-72
*!3J1I8D-achjaf!
*!3J1I8D-bcjiah!
20"/ 72DL/ 3/8" Large bar mount 1,5 mm
501 95 60-72
537 02 64-03
537 02 64-01
*!3J1I8D-acifca!
*!3J1I8D-bghgha!
*!3J1I8D-bghgih!
20" /72DL/ 3/8" Small bar mount 1,5 mm
20" / 78DL/ .325" Small bar mount 1,5 mm
508 91 91-72
508 91 21-80
508 92 61-80
*!3J1I8D-bcjibe!
*!3J1I8D-afbggf!
81
*!3J1I8D-afbgfi!
82
83
Solid bars with replaceable tip
Recommended for use with long bars to reduce load on bar tip. Load is
transfered to the high quality roller bearing. Frictional loss is reduced by 810% depending on bar length. Bars are epoxy coated to protect against
scratches and corrosion. Replaceable tip is available as a spare part.
Available with 3/8 inch chain pitch in lengths 18 inch to 28 inch.
20“ / 72DL / 3/8“ Small bar mount 1,5 mm
501 95 69-68
501 95 77-72
*!3J1I8D-acjded!
*!3J1I8D-acjddg!
18“ / 68DL/ 3/8" Small bar mount 1,5 mm
22“ / 76DL / 3/8“ Large bar mount 1,5 mm
501 95 77-68
501 95 69-76
*!3J1I8D-acjdcj!
*!3J1I8D-ahdjjf!
501 95 69-72
501 95 69-84
501 95 69-92
*!3J1I8D-acjdfa!
*!3J1I8D-acjdgh!
*!3J1I8D-acjdhe!
Solid bars
Solid bars are used for hard species of timber, thick bark and in very sandy,
dusty or sooty conditions. Bars are epoxy coated to protect against
scratches and corrosion. Available with 3/8 inch pitch in lengths 18 inch to
28 inch and with .404 inch pitch in lengths 24 inch to 42 inch.
24“ / 76DL/ .404" Large bar mount 1,6 mm
501 95 80-68
507 47 60-46
501 95 81-92
*!3J1I8D-acjdib!
*!3J1I8D-acjeci!
*!3J1I8D-acjedf!
501 95 80-72
501 95 80-92
501 95 81-04
*!3J1I8D-acjdji!
*!3J1I8D-acjebb!
*!3J1I8D-acjeec!
24“ / 84DL/ 3/8“ Large bar mount 1,5mm
501 95 80-84
501 58 96-01
501 92 18-24
*!3J1I8D-acjeae!
*!3J1I8D-adfjaa!
84
*!3J1I8D-acjefj!
Bar kit
Kit with one bar and two chains.
13" .325
13" Pixel
531 00 38-13
531 00 38-93
*!3J1I8D-aahaca!
*!3J1I8D-acidhh!
15" .325
15" Pixel
531 00 38-17
531 00 38-92
*!3J1I8D-aahadh!
*!3J1I8D-acidga!
Special bars
Bars for pole saws and other chain saws.
6" / 20 cm / 3/8"
502 40 52-01
10" / 40DL / 3/8" MINI Small bar mount 1,3 mm for 323P4,
325P5x
325P5x
501 95 92-40
501 95 95-45
*!3J1I8D-afgjfa!
*!3J1I8D-afecga!
Saw mill
*!3J1I8D-aiaiha!
501 96 16-68
*!3J1I8D-aiacbe!
325P5x
12" / 45DL/ 3/8" MINI Small bar mount 1,3 mm for 323P4,
325P5x
Saw mill
501 95 95-40
501 95 92-45
501 96 16-82
*!3J1I8D-aiaiih!
*!3J1I8D-adfjbh!
85
*!3J1I8D-aiaccb!
Bar spares
Replaceable nose sprockets for your bars.
.325” 1,3mm, EM 10T H30
.3/8” 1,5mm, 11T
501 85 10-05
501 95 74-01
*!3J1I8D-afecdj!
*!3J2J3A-abffhj!
.325” 1,5mm, EM 10T
.325” 1,5mm, 10T
.325" 1,5mm, 12T
501 85 10-01
501 95 72-01
501 95 94-01
*!3J2J3A-abffei!
*!3J2J3A-abffff!
*!3J1I8D-befeje!
.3/8” 1,5mm, EM 10T
.3/8” 1,5mm, 11T
.404" 7T
501 85 10-02
501 95 75-01
501 59 79-02
*!3J2J3A-abffgc!
*!3J2J3A-abffig!
Starter cord
Tough polyester/cotton cord.
100m x 3.0mm
100m x 4.0mm
531 00 38-75
531 00 38-77
*!3J1I8D-adgieg!
*!3J1I8D-adgiga!
100m x 3.5mm
100m x 4.5mm
531 00 38-76
531 00 38-78
*!3J1I8D-adgifd!
*!3J1I8D-adgihh!
Chainsaw box
Tough, handy carrying case designed to carry a chainsaw, lubricants and
other accessories.
531 30 08-72
*!3J1I8D-bdjibd!
86
*!3J1I8D-aifcfh!
Chains
Saw chain H00
An extremely lightweight chain for smooth, clean cuts. Recommended
for use on saws up to 38cc.
68dl/ .325"/ 1,3 mm
76dl/ .325"/ 1,3 mm
501 84 40-68
501 84 40-76
*!3J1I8D-becbde!
*!3J1I8D-becbfi!
72dl/ .325"/ 1,3 mm
Reel 25 feet/ .325"/ 1,3 mm
Reel 100 feet/ .325"/ 1,3 mm
501 84 40-72
503 30 54-25
503 30 54-01
*!3J1I8D-becbeb!
*!3J1I8D-beajgd!
*!3J1I8D-afebeh!
Saw chain H30
A low kickback, low-vibration chain developed to meet the specific needs
of today’s lightweight chainsaws. It cuts a narrow kerf and requires less
power from the saw than standard cutting systems. Not recommended for
heavy-duty work, e.g. storm damaged forests. Recommended for use on
35cc to 55cc saws.
56dl/ .325"/ 1.3 mm
72dl/ .325"/ 1.3 mm
501 84 06-56
501 84 06-72
*!3J1I8D-aciaab!
*!3J1I8D-aciadc!
64dl/ .325"/ 1.3 mm
78dl/ .325"/ 1.3 mm
Reel 25 feet/ .325"/ 1.3 mm
501 84 06-64
501 84 06-78
503 30 58-25
*!3J1I8D-aciabi!
*!3J1I8D-aghjje!
*!3J1I8D-agiaah!
66dl/ .325"/ 1.3 mm
80dl/ .325"/ 1.3 mm
Reel 100 feet/ .325"/ 1.3 mm
501 84 06-66
501 84 06-80
503 30 58-01
*!3J1I8D-aciacf!
*!3J1I8D-afbjff!
87
*!3J1I8D-afbiha!
Saw chain H21
A high-performance, low-vibration chain with square-corner “chisel”
cutters, ideal for professional users in demanding conditions.
Recommended for use on 35cc to 60cc saws.
56dl/ .325"/ 1,5
72dl/ .325"/ 1,5
501 84 07-56
501 84 07-72
*!3J1I8D-addgaj!
*!3J1I8D-addfjd!
64dl/ .325"/ 1,5
80dl/ .325"/ 1,5
501 84 07-64
501 84 07-80
*!3J1I8D-addfig!
*!3J1I8D-bdhgia!
66dl/ .325"/ 1,5
Reel 25 feet/ .325"/ 1,5
Reel 100 feet/ .325"/ 1,5
501 84 07-66
503 30 57-25
503 30 57-01
*!3J1I8D-bdhegi!
*!3J1I8D-aggiji!
*!3J1I8D-afecai!
Saw chain H23
64dl/ .325"/ 1,3
74dl/ .325"/ 1,3
501 84 08-64
501 84 08-74
*!3J1I8D-ahbcfa!
*!3J1I8D-agghic!
66dl/ .325"/ 1,3
78dl/ .325"/ 1,3
Reel 25 feet/ .325"/ 1,3
501 84 08-66
501 84 08-78
503 30 91-25
*!3J1I8D-agghfb!
*!3J1I8D-agghjj!
*!3J1I8D-bebbhf!
72dl/ .325"/ 1,3
80dl/ .325"/ 1,3
Reel 100 feet/ .325"/ 1,3
501 84 08-72
501 84 08-80
503 30 91-01
*!3J1I8D-agghhf!
*!3J1I8D-aggiaf!
88
*!3J1I8D-bdejig!
Saw chain H26
64dl/ .325"/ 1,6
72dl/ .325"/ 1,6
Reel 25 feet/ .325"/ 1,6
501 84 17-64
501 87 17-72
503 30 73-25
*!3J1I8D-ahbche!
*!3J1I8D-ahbcji!
*!3J1I8D-aggjfj!
66dl/ .325"/ 1,6
78dl/ .325"/ 1,6
Reel 100 feet/ .325"/ 1,6
501 84 17-66
501 84 17-78
503 30 73-01
*!3J1I8D-ahbcib!
*!3J1I8D-ahbdae!
*!3J1I8D-aggjec!
Saw chain H22
A fast-cutting, low-vibration chain where cutters have small-radius
working corners for fast cutting and easy sharpening. Recommended for
use on 35cc to 60cc saws.
66dl/ .325"/ 1,5
78dl/ .325"/ 1,5
501 84 09-66
501 84 09-78
*!3J1I8D-ahbcaf!
*!3J1I8D-ahbccj!
72dl/ .325"/ 1,5
Reel 25 feet/ .325"/ 1,5
Reel 100 feet/ .325"/ 1,5
501 84 09-72
503 30 67-25
503 30 67-01
*!3J1I8D-ahbcbc!
*!3J1I8D-agghee!
*!3J1I8D-agghdh!
Saw chain H25
52dl/ .325"/ 1,5 mm
66dl/ .325"/ 1,5 mm
501 84 04-52
501 84 04-66
*!3J1I8D-aciaha!
*!3J1I8D-acibaa!
56dl/ .325"/ 1,5 mm
72dl/ .325"/ 1,5 mm
Reel 25 feet/ .325"/ 1,5 mm
501 84 04-56
501 84 04-72
503 30 55-25
*!3J1I8D-aciaih!
*!3J1I8D-acibbh!
*!3J1I8D-aggidg!
64dl/ .325"/ 1,5 mm
80dl/ .325"/ 1,5 mm
Reel 100 feet/ .325"/ 1,5 mm
501 84 04-64
501 84 04-80
503 30 55-01
*!3J1I8D-aciaje!
*!3J1I8D-afchbg!
89
*!3J1I8D-afebcd!
Saw chain H28
Reel 100 feet/ .325"/ 1,6
503 30 03-22
*!3J1I8D-afbigd!
Saw chain H37
66dl / .325"/ 1,3 mm
72dl / .325"/ 1,3 mm
78dl / .325"/ 1,3 mm
501 84 18-66
501 84 18-72
501 84 18-78
*!3J1I8D-ahbdci!
*!3J1I8D-ahbddf!
*!3J1I8D-ahbdec!
Saw chain H38
66dl / .325"/ 1,5 mm
72dl / .325"/ 1,5 mm
78dl / .325"/ 1,5 mm
501 84 19-66
501 84 19-72
501 84 19-78
*!3J1I8D-agiacb!
*!3J1I8D-agiadi!
90
*!3J1I8D-agiaef!
Saw chain H35
A low-vibration chain for woodcutters who use smaller-size saws in highproduction environment. Recommended for professional use on saws up
to 50cc.
45dl/ 3/8"/ 1.5 mm
56dl/ 3/8"/ 1.5 mm
501 84 70-45
501 84 70-56
*!3J1I8D-aghiii!
*!3J1I8D-aghjdc!
52dl/ 3/8"/ 1.5 mm
Reel 25 feet/ 3/8"/ 1.5 mm
Reel 100 feet/ 3/8"/ 1.5 mm
501 84 70-52
503 30 69-25
503 30 69-01
*!3J1I8D-aghjbi!
*!3J1H3G-abjgee!
*!3J1I8D-behbhh!
Saw chain H36
A low kickback, low-vibration chain recommended for smaller-size saws
such as tree care saws. Recommended for use on saws up to 50cc.
32dl/ 3/8"/ 1.3 mm
50dl/ 3/8"/ 1.3 mm
62dl/ 3/8"/ 1.3 mm
501 84 21-32
501 84 21-50
501 84 21-62
*!3J1I8D-adddjf!
*!3J1I8D-addfgc!
*!3J1I8D-bdhhjg!
40dl/ 3/8"/ 1.3 mm
52dl/ 3/8"/ 1.3 mm
Reel 25 feet/ 3/8"/ 1.3 mm
501 84 21-40
501 84 21-52
503 30 86-25
*!3J1I8D-afhceh!
*!3J1I8D-addebi!
*!3J1I8D-aghihb!
45dl/ 3/8"/ 1.3 mm
56dl/ 3/8"/ 1.3 mm
Reel 100 feet/ 3/8"/ 1.3 mm
501 84 21-45
501 84 21-56
503 30 86-01
*!3J1I8D-addeab!
*!3J1I8D-addecf!
91
*!3J1I8D-aghige!
Saw chain H42
cutters for high-production cutting of clean wood. Round ground cutters
in standard sequence. Recommended for professional use on 50cc to
100cc saws.
52dl/ 3/8"/ 1.5 mm
68dl/ 3/8"/ 1.5 mm
105/ 3/8"/ 1,5 mm
501 84 14-52
501 84 14-68
501 84 14-05
*!3J1I8D-aciccd!
*!3J1I8D-acicfe!
*!3J1I8D-aghgae!
56dl/ 3/8"/ 1.5 mm
72dl/ 3/8"/ 1.5 mm
110dl/ 3/8"/ 1.5 mm
501 84 14-56
501 84 14-72
501 84 14-10
*!3J1I8D-acicda!
*!3J1I8D-acicgb!
*!3J1I8D-ahbdhd!
60dl/ 3/8"/ 1.5 mm
84dl/ 3/8"/ 1.5 mm
115dl/ 3/8"/ 1.5 mm
501 84 14-60
501 84 14-84
501 84 14-15
*!3J1I8D-aciceh!
*!3J1I8D-acichi!
*!3J1I8D-aghgbb!
62dl/ 3/8"/ 1.5 mm
92dl/ 3/8"/ 1.5 mm
Reel 25 feet/ 3/8"/ 1.5 mm
501 84 14-62
501 84 14-92
503 30 60-25
*!3J1I8D-bdhfcj!
*!3J1I8D-acicif!
*!3J1I8D-aghgdf!
64dl/ 3/8"/ 1.5 mm
93dl/ 3/8"/ 1,5 mm
Reel 100 feet/ 3/8"/ 1.5 mm
501 84 14-64
501 84 14-93
503 30 60-01
*!3J1I8D-bdhfdg!
*!3J1I8D-aghfji!
*!3J1I8D-afebda!
Saw chain H45
100cc saws.
72dl/ 3/8"/ 1,3 mm
84dl/ 3/8"/ 1,6 mm
Reel 100 feet/ 3/8"/ 1.6 mm
501 87 71-72
501 87 71-84
503 30 88-01
*!3J1I8D-behbfd!
*!3J1I8D-behbga!
92
*!3J1I8D-ahbfhb!
Saw chain H46
100cc saws.
60dl/ .3/8"/ 1,3 mm
84dl/ .3/8"/ 1,3 mm
501 84 25-60
501 84 25-84
*!3J1I8D-aghdah!
*!3J1I8D-aghdfc!
66dl/ 3/8"/ 1,3 mm
92dl/ 3/8"/ 1,3 mm
501 84 25-66
501 84 25-92
*!3J1I8D-aghdbe!
*!3J1I8D-beajih!
68dl/ .3/8"/ 1,3 mm
93dl/ .3/8"/ 1,3 mm
Reel 25 feet/ .3/8"/ 1,3 mm
501 84 25-68
501 84 25-93
503 30 78-25
*!3J1I8D-aghdcb!
*!3J1I8D-aghdhg!
*!3J1I8D-aghebd!
72dl/ .3/8"/ 1,3 mm
105dl/ .3/8"/ 1,3 mm
Reel 100 feet/ .3/8"/ 1,3 mm
501 84 25-72
501 84 25-05
503 30 78-01
*!3J1I8D-aghdef!
*!3J1I8D-aghdid!
*!3J1I8D-agheag!
Saw chain H47
100cc saws.
60dl/ 3/8"/ 1,3 mm
92dl/ 3/8"/ 1,3 mm
501 84 26-60
501 84 26-92
*!3J1I8D-aghbjc!
*!3J1I8D-beajha!
68dl/ 3/8"/ 1,3 mm
93dl/ 3/8"/ 1,3 mm
501 84 26-68
501 84 26-93
*!3J1I8D-aghcbf!
*!3J1I8D-aghcfd!
72dl/ 3/8"/ 1,3 mm
105dl/ 3/8"/ 1,3 mm
Reel 25 feet/ 3/8"/ 1,3 mm
501 84 26-72
501 84 26-05
503 30 79-25
*!3J1I8D-aghcdj!
*!3J1I8D-aghcga!
*!3J1I8D-aghcie!
84dl/ 3/8"/ 1,3 mm
115dl/ 3/8"/ 1,3 mm
Reel 100 feet/ 3/8"/ 1,3 mm
501 84 26-84
501 84 26-15
503 30 79-01
*!3J1I8D-aghceg!
*!3J1I8D-ahbdjh!
93
*!3J1I8D-aghchh!
Saw chain H47S
in skip sequence. Recommended for professional use on 50cc to 100cc
saws.
68dl/ 3/8"/ 1,3 mm
93dl/ 3/8"/ 1,3 mm
501 84 27-68
501 84 27-93
*!3J1I8D-bdehac!
*!3J1I8D-aghbfe!
72dl/ 3/8"/ 1,3 mm
105dl/ 3/8"/ 1,3 mm
501 84 27-72
501 84 27-05
*!3J1I8D-aghbda!
*!3J1I8D-aghbgb!
84dl/ 3/8"/ 1,3 mm
Reel 25 feet/ 3/8"/ 1,3 mm
Reel 100 feet/ 3/8"/ 1,3 mm
501 84 27-84
503 30 80-25
503 30 80-01
*!3J1I8D-aghbeh!
*!3J1I8D-ahbfge!
*!3J1I8D-aghbhi!
Saw chain H48
100cc saws.
60dl/ 3/8"/ 1.5 mm
89dl/ 3/8"/ 1,5 mm
110dl/ 3/8"/ 1,5 mm
501 84 28-60
501 84 28-89
501 84 28-10
*!3J1I8D-aghfaf!
*!3J1I8D-becbba!
*!3J1I8D-bebaah!
68dl/ 3/8"/ 1.5 mm
92dl/ 3/8"/ 1.5 mm
115dl/ 3/8"/ 1.5 mm
501 84 28-68
501 84 28-92
501 84 28-15
*!3J1I8D-aghfbc!
*!3J1I8D-bdhhij!
*!3J1I8D-aghfgh!
72dl/ 3/8"/ 1.5 mm
93dl/ 3/8"/ 1.5 mm
119dl/ 3/8"/ 1,5 mm
501 84 28-72
501 84 28-93
501 84 28-19
*!3J1I8D-aghfcj!
*!3J1I8D-aghfed!
*!3J1I8D-bebabe!
77dl/ 3/8"/ 1.5 mm
102dl/ 3/8"/ 1,5 mm
Reel 25 feet/ 3/8"/ 1.5 mm
501 84 28-77
501 84 28-02
503 30 81-25
*!3J1I8D-bdejgc!
*!3J1I8D-beajje!
*!3J1I8D-aghfib!
84dl/ 3/8"/ 1.5 mm
105dl/ 3/8"/ 1.5 mm
Reel 100 feet/ 3/8"/ 1.5 mm
501 84 28-84
501 84 28-05
503 30 81-01
*!3J1I8D-aghfdg!
*!3J1I8D-aghffa!
94
*!3J1I8D-aghfhe!
Saw chain H48S
in skip sequence. Recommended for professional use on 50cc to 100cc
saws.
72dl/ 3/8"/ 1.5 mm
92dl/ 3/8"/ 1.5 mm
544 07 59-72
544 07 59-92
*!3J1I8D-bdeecj!
*!3J1I8D-bdeegh!
77dl/ 3/8"/ 1.5 mm
93dl/ 3/8"/ 1.5 mm
120dl/ 3/8"/ 1.5 mm
544 07 59-77
544 07 59-93
544 07 59-20
*!3J1I8D-bdeedg!
*!3J1I8D-bdeehe!
*!3J1I8D-bdeebc!
84dl/ 3/8"/ 1.5 mm
102dl/ 3/8"/ 1.5 mm
Reel 25 feet/ 3/8"/ 1.5 mm
544 07 59-84
544 07 59-02
544 07 58-25
*!3J1I8D-bdeeed!
*!3J1I8D-bdedjj!
*!3J1I8D-bdedca!
89dl/ 3/8"/ 1.5 mm
110dl/ 3/8"/ 1.5 mm
Reel 100 feet/ 3/8"/ 1.5 mm
544 07 59-89
544 07 59-10
544 07 58-01
*!3J1I8D-bdeefa!
*!3J1I8D-bdeeaf!
*!3J1I8D-bdecid!
Saw chain H82
cutters for high-production cutting of clean wood. Square ground cutters.
Recommended for professional use on 50cc to 100cc saws.
72dl/ 3/8"/ 1,3 mm
93dl/ 3/8"/ 1,3 mm
115dl/ 3/8"/ 1,3 mm
501 84 67-72
501 87 67-93
501 84 67-15
*!3J1I8D-aghaig!
*!3J1I8D-aghbaj!
*!3J1I8D-ahbede!
84dl/ 3/8"/ 1,3 mm
105dl/ 3/8"/ 1,3 mm
Reel 100 feet/ .3/8"/ 1,3 mm
501 84 67-84
501 84 67-05
503 30 84-01
*!3J1I8D-aghajd!
*!3J1I8D-aghbbg!
Saw chain H51
working corners for fast cutting and easy sharpening. Gives a fast, yet
smooth, cutting action. Recommended for use on 50cc to 100cc saws.
Reel 100 feet/ .3/8"/ 1,3 mm
503 30 33-22
*!3J1I8D-afeccc!
95
*!3J1I8D-aghbcd!
Saw chain H54
working corners for fast cutting and easy sharpening. Gives a fast, yet
smooth, cutting action. Recommended for use on 50cc to 100cc saws.
56dl/ 3/8"/ 1.5 mm
72dl/ 3/8"/ 1.5 mm
544 07 88-56
544 07 88-72
*!3J1I8D-bdejaa!
*!3J1I8D-bdejdb!
60dl/ 3/8"/ 1.5 mm
84dl/ 3/8"/ 1.5 mm
544 07 88-60
544 07 88-84
*!3J1I8D-bdejbh!
*!3J1I8D-bdejei!
68dl/ 3/8"/ 1.5 mm
92dl/ 3/8"/ 1.5 mm
Reel 100 feet/ 3/8"/ 1.5 mm
544 07 88-68
544 07 88-92
503 30 50-01
*!3J1I8D-bdejce!
*!3J1I8D-bdejff!
*!3J1I8D-bdhhhc!
Saw chain H80
A low kickback, low-vibration chain recommended for use on 50cc to
100cc saws.
60dl/ .3/8"/ 1,3 mm
72dl/ .3/8"/ 1,3 mm
Reel 25 feet/ .3/8"/ 1,3 mm
501 84 65-60
501 84 65-72
503 30 82-25
*!3J1I8D-aghedh!
*!3J1I8D-aghefb!
*!3J1I8D-aghejj!
68dl/ .3/8"/ 1,3 mm
84dl/ .3/8"/ 1,3 mm
Reel 100 feet/ .3/8"/ 1,3 mm
501 84 65-68
501 84 65-84
503 30 82-01
*!3J1I8D-agheee!
*!3J1I8D-aghegi!
*!3J1I8D-agheic!
Saw chain H81
A low kickback, low-vibration chain recommended for use on 50cc to
100cc saws.
60dl/ 3/8"/ 1.5 mm
72dl/ 3/8"/ 1.5 mm
Reel 25 feet/ 3/8"/ 1.5 mm
501 84 66-60
501 84 66-72
503 30 83-25
*!3J1I8D-aghgec!
*!3J1I8D-aghggg!
*!3J1I8D-aghhad!
68dl/ 3/8"/ 1.5 mm
84dl/ 3/8"/ 1.5 mm
Reel 100 feet/ 3/8"/ 1.5 mm
501 84 66-68
501 84 66-84
503 30 83-01
*!3J1I8D-aghgfj!
*!3J1I8D-aghghd!
96
*!3J1I8D-aghgjh!
Saw chain H83
93dl/ 3/8"/ 1,3 mm
105dl/ 3/8"/ 1,6 mm
115dl/ 3/8"/ 1,6 mm
501 84 68-93
501 84 68-05
501 84 68-15
*!3J1I8D-ahbeeb!
*!3J1I8D-aghhba!
*!3J1I8D-aghhde!
Saw chain H58S
A big-timber chain with square-corner “chisel” cutters, ideal for users who
cut clean wood with larger-size chainsaws. Recommended for
professional use on 85 cc saws and larger.
72dl/ .404"/ 1,6 mm
140dl/ .404"/ 1,6 mm
501 84 35-72
501 84 35-40
*!3J1I8D-ahbfea!
*!3J1I8D-ahbfdd!
104dl/ .404"/ 1,6 mm
190dl/ .404"/ 1,6 mm
501 84 35-04
501 84 35-90
*!3J1I8D-ahbfbj!
*!3J1I8D-ahbffh!
128dl/ .404"/ 1,6 mm
Reel 25 feet/ .404"/ 1,6 mm
Reel 100 feet/ .404"/ 1,6 mm
501 84 35-28
503 30 89-02
503 30 89-01
*!3J1I8D-ahbfcg!
*!3J1I8D-ahbgbi!
Saw chain H69
A big-timber chain with square-corner “chisel” cutters, ideal for users who
cut clean wood with larger-size chainsaws. Recommended for
professional use on 85 cc saws and larger.
100dl/ .3/8"/ 1,6 mm
Reel 25 feet/ .3/8"/ 1,6 mm
544 07 61-00
544 07 60-25
*!3J1I8D-bdefci!
*!3J1I8D-bdhhfi!
108dl/ .3/8"/ 1,6 mm
Reel 100 feet/ .3/8"/ 1,6 mm
544 07 61-08
544 07 60-01
*!3J1I8D-bdefec!
*!3J1I8D-bdefdf!
97
*!3J1I8D-ahbgab!
Saw chain H64
A big-timber chain where cutters have small-radius working corners for
fast cutting and easy sharpening. Recommended for professional use on
85cc saws and larger.
76dl / .404" / 1.6 mm
104dl / .404" / 1.6 mm
501 84 31-76
501 84 31-04
*!3J1I8D-aedgfd!
*!3J1I8D-aedgie!
84dl / .404" / 1.6 mm
124dl / .404" / 1.6 mm
501 84 31-84
501 84 31-24
*!3J1I8D-aedgga!
*!3J1I8D-aedgjb!
92dl / .404" / 1.6 mm
Reel 25 feet/ .404"/ 1,6 mm
Reel 100 feet/ .404"/ 1,6 mm
501 84 31-92
503 30 64-25
503 30 64-01
*!3J1I8D-aedghh!
*!3J1I8D-agghca!
*!3J1I8D-afebjc!
Saw chain H66
A big-timber chain designed for the professional, especially in tropical
hardwood areas. Fully rounded “chipper”-type cutters for excellent
performance, easy sharpening and edge-holding durability. Recommended for saws of 85 cc and larger.
Reel 100 feet/ .404"/ 1,6 mm
503 30 65-01
*!3J1I8D-bdejjd!
Saw chain H57
76dl/ .404"/ 1,6 mm
95dl/ .404"/ 1,6 mm
104dl/ .404"/ 1,6 mm
501 84 34-76
501 84 34-95
501 84 34-04
*!3J1I8D-ahbfac!
*!3J1I8D-aghabh!
98
*!3J1I8D-aghace!
Saw chain H64S
Reel 100 feet/ .404"/ 1,6 mm
544 92 30-01
*!3J1I8D-beijja!
Saw chain H30R
Chains with special factory grind for making dimensional boards and
planks from larger timbers by cutting parallel to the wood grain.Only for
use on chain-type saw mills, not for hand-held use.
68dl/ .325"/ 1.3 mm, unpacked
82dl/ .325"/ 1.3 mm, unpacked
503 30 70-68
503 30 70-82
*!3J1I8D-aiabjb!
*!3J1I8D-aiacah!
Saw chain H52
Reel 100 feet/ 3/8"/ 1.5 mm
503 30 52-22
*!3J1I8D-bdhhgf!
Saw chain H65
Reel 100 feet/ .404"/ 1,6 mm
503 30 66-01
*!3J1I8D-aggjgg!
99
Saw chain 90SG
Pitch 3/8"- 90, dim. 1,1 mm, fits 323P4 and 325P5x.
40dl
45dl
501 84 23-40
501 84 23-45
*!3J1I8D-afddjd!
*!3J1I8D-afdeaj!
Rivet spinner
To spin saw chain rivet heads to match factory-spun rivets of new chain.
Makes a neater, stronger, smoother head than with manual preening.
Comes together with an adapter to attach to an electric drill forhigh-speed
rivet spinning. Made in welded steel.
505 66 52-52
*!3J1I8D-bdeabg!
Chain breaker
A bench type chain breaker for workshop use. The breaker has a specially
designed leverage and a unique anvil for driving bar nose rivets. Made of
welded steel.
505 66 52-50
*!3J1I8D-bdeaaj!
Reel holder
The reel holderoffersan affordable way tohandle reelswhen making loops.
The unit adapts to all chain reels through ½ pitch.
505 66 52-54
*!3J1I8D-bdeacd!
100
Filing equipment
Round files
To keep your chain in trim you will need a round file and a file gauge to
sharpen the cutters. With a correct sharpened chain your work will be
easier and safer. Our files are made in high-quality steel. Packaged two files
in a plastic wallet.
Ø4.0 mm, 2 files x 6 wallets
544 03 69-40
544 03 69-48
*!3J1I8D-bdahdf!
*!3J1I8D-bdahfj!
544 03 69-45
544 03 69-55
*!3J1I8D-bdahec!
*!3J1I8D-bdahgg!
Round files 6 pack
easier and safer. Our files are made in high-quality steel. Packaged six files
in a paper box.
Ø4,0mm, 6 files x 2 boxes
505 69 81-42
505 69 81-53
*!3J1I8D-aidfji!
*!3J1I8D-aidgbb!
505 69 81-47
505 69 81-58
*!3J1I8D-aidfgh!
*!3J1I8D-aidfhe!
Round files 12 pack
easierand safer. Our files are made in high-quality steel. Packaged 12 files in
a paper box.
Ø4,0mm, 12 files x 1 box
505 69 81-41
505 69 81-52
*!3J1I8D-aeeged!
*!3J1I8D-ahgjde!
505 69 81-49
505 69 81-56
*!3J1I8D-aaeeej!
*!3J1I8D-aaeefg!
101
Round files bulk pack
easier and safer. Our files are made in high-quality steel. Packaged 150 or
300 files in a bulk.
Ø4,8mm 150 files
Ø5,5mm 150 files
505 69 81-51
505 69 81-59
*!3J1I8D-aidgci!
*!3J1I8D-aidgdf!
Ø4,8mm 300 files
Ø5,5mm 300 files
505 69 81-50
505 69 81-57
*!3J1I8D-aaeegd!
*!3J1I8D-aaeeha!
Flat files
To keep your chain in trim you will need a flat file and a depth gauge to file
correct depth gauge. With a correct sharpened chain your work will be
easier and safer. Our files are made in high-quality steel. Packaged one file
in a plastic wallet.
6", 1 file x 12 wallets
8", 1 file x 12 wallets
505 69 81-60
505 69 81-80
*!3J1H3G-aadadc!
*!3J1H3G-aacbeb!
Flat files 12 pack
easierand safer. Our files are made in high-quality steel. Packaged 12 files in
a paper box.
6", 12 files x 1 box
8", 12 files x 1 box
505 69 81-61
505 69 81-81
*!3J1I8D-aaeeih!
*!3J1I8D-aaeeje!
Flat files bulk pack
easier and safer. Our files are made in high-quality steel. Packaged 100 files
in a bulk.
6", 100 files
505 69 81-62
*!3J1I8D-aaefaa!
102
File handles
Patented file locking system. Fits 4.0-4.5 mm round file and 6 inch and 8
inch flat file. 25° and 30° guides ensures correct file angling.
Ø4.0-5.5 mm
505 69 78-15
*!3J1I8D-adcehd!
File gauges
Specially designed file gauges that give the correct filing angles, use
together with our round files. Available for all Husqvarna chains. With a
correct sharpened chain your work will be easier and safer.
.325” H25-LV (21BP-VL)
3/8” S46 (72LP) H42-LV (73LP-VL)
505 69 81-10
505 69 81-12
*!3J1I8D-aaahig!
*!3J1I8D-aaahjd!
.325” S24 (34LG) 34SL
3/8” S43 (91SG)
.404” H64 (27)
505 69 81-11
505 69 81-14
505 69 81-15
*!3J1H3G-aadhia!
*!3J1H3G-aadhjh!
Depth gauges
Specially designed depth gauges that give the correct filing angles, use
together with our flat files. Available for all Husqvarna chains. With the
correct raker clearance you get the maximum performance.
.325”
.404”
505 69 81-00
505 69 81-02
*!3J1H3G-aadiba!
*!3J1H3G-aadide!
3/8”
3/8” Hobby 91SG
505 69 81-01
505 69 81-03
*!3J1H3G-aadich!
*!3J1H3G-aaebcb!
103
*!3J1H3G-aadiad!
Combination gauges
Our combinationgauges are specially designed with a file gauge and depth
gauge put together in one tool. Use together with our round and flat files
for a correct filing angle. Available forall Husqvarna chains. With a correct
sharpened chain your work will be easier and safer.
3/8” H42
.325/1.3” PIXEL H30
.325/1.5” H25
505 69 81-07
505 69 81-08
505 69 81-09
*!3J1I8D-aahdfi!
*!3J1I8D-achhja!
*!3J1I8D-acgicd!
File gauge, saw blade
File gauge including file forsaw blades that ensures correct filing technique
and filing angles.
File gauge
Holster
505 69 81-20
505 69 32-20
*!3J1I8D-aacecb!
*!3J1I8D-aaibfh!
File kit
Complete filing kit to simplify the work of keeping your chain in trim.
With a correct sharpened chain your work will be easier and safer. The file
kits contains a file handle, combination gauge or a file gauge and depth
gauge, two round files and one flat file.
.325"
3/8"
505 69 81-25
505 69 81-30
*!3J1I8D-aaajfd!
*!3J1I8D-aaajga!
.325" PIXEL
.404"
3/8" Hobby
505 69 81-27
505 69 81-92
505 69 81-38
*!3J1I8D-acidie!
*!3J1I8D-afejha!
Stump Vise
Our stump vise is an excellent tool for professionals and homeowners to
fasten the chainsaw in a secure position when filing. Made of forged steel.
505 66 52-56
*!3J1I8D-aiddid!
104
*!3J1I8D-adiibj!
105
Air filters for chain saws.
Husqvarna’s air filters are tested for and adapted to a range of applications and environments, to offer the correct
balance between what they block and what they let through. A properly selected air filter extends the life of the engine,
and also allows the engine to operate at its most efficient rate, without interference, at optimal combustion.
Felt
Nylon 44 HD
Air filter with felt as its filter medium, for dry and dusty
environments. Here you need a high-density filter, to catch the
finest particles that can be circulating in the air.
All-round filter for normal and damp conditions. The material
is woven nylon fabric and is washable with soap and water.
Requires a larger filter cover or cylinder cover.
Felt HD
Nylon 80
Air filter with extra high capacity and density, for extremely
dusty conditions, such as clean-up after forest fires, close to sandy
beaches, roads, etc. Washable with soap and water. Requires a larger
filter cover.
This filter is for winter use, when dampness and snow reduce
sawdust and dust levels. Also, with a more open filter there
is less risk that the filter gets blocked by ice in cold and damp
weather.
Foam
Nylon 80 HD
Air filter made of polyester foam, for extremely dusty conditions,
such as clean-up after forest fires, on sandy beaches, roads, etc.
Washable with soap and water. Impregnated with filter oil, which
catches the particles.
Winter filter for damp and/or cold conditions. The material
is woven nylon fabric and is washable with soap and water.
Requires a larger filter cover or cylinder cover.
Nylon 44
This is a standard filter, with a density suitable for all-round use.
Gives long intervals between cleaning, in environments where
sawdust and dust are within normal ranges.
106
'%&$LD
'-)LD
',)LD
)+$#)+)LD
&,%LD#&,,LD
'*)#'+&LD
*%
())FUbW\Yf#(*$
')+LD#')-
))
')'#'(*LDg"bf"2$'(&lllll
')$#')'#'(*LD
'($Y!gYf]Yg#'()Y!gYf]Yg
''*#''-LD
''(H#'',LDH
%'+Y!gYf]Yg#%(&Y!gYf]Yg
FOCFIQBOPCBIQCL>J

107
1VMB
OQKO
:Y`h
)'$$&-,!%%
:Y`h
)'+$&($!$'
:Y`h
)'+&*(-!$'
:Y`h
)$'*$,'!$%
:Y`h
)'+$%$-!$'
:Y`h
)$%,$+%!$)
:Y`h
)$',%()!$'
:Y`h
)'+$%(+!$'
:Y`h
)$',-)'!$%
:Y`h<8
)$',%,$!$%
:Y`h<8
)'+((((!$%
:Y`h<8
)$'+$,-!$%
:cUa
)$',((-!$%
:cUa
)$'%(%,!$&
:Y`h
)'+&))+!$'
:Y`h
)'+&$**!$'
:Y`h
)'+&$+)!$%
'%&$LD
'-)LD
',)LD
)+$#)+)LD
&,%LD#&,,LD
'*)#'+&LD
*%
())FUbW\Yf#(*$
')+LD#')-
))
')$#')'#'(*LD
''*#''-LD
''(H#'',LDH
FOCFIQBOPKVILK

108
1VMB
OQKO
Bm`cb)&
)$'-*+&!$%
Bm`cb)&
)'+$+*%!$%
Bm`cb((
)'+$&($!$&
Bm`cb((
)'+&*(-!$&
Bm`cb((
)'+$%$-!$&
Bm`cb((
)$',%()!$&
Bm`cb((
)'+$%(+!$&
Bm`cb((
)$%,$+%!$*
Bm`cb((<8
)$',%,$!$'
Bm`cb((<8
)'+((((!$'
Bm`cb,$
)$'-*+&!$&
Bm`cb,$
)'$$&--!$,
Bm`cb,$
)'+$+*%!$&
Bm`cb,$
)'+$&($!$%
Bm`cb,$
)'+&*(-!$%
Bm`cb,$
)$'*$,'!$&
'%&$LD
'-)LD
',)LD
)+$#)+)LD
&,%LD#&,,LD
'*)#'+&LD
*%
())FUbW\Yf#(*$
))
')$#')'#'(*LD
''*#''-LD
''(H#'',LDH
')+LD#')-

109
1VMB
OQKO
Bm`cb,$
)'+$%$-!$%
Bm`cb,$
)$',%()!$%
Bm`cb,$
)'+$%(+!$%
Bm`cb,$
)$%,$+%!$%
Bm`cb,$<8
)$',%,$!$&
Bm`cb,$<8
)'+$%(+!+%
Bm`cb,$<8
)$'))%&!$&
Bm`cb,$<8
)((((((!$&
Bm`cb((
)'+&))+!$&
Bm`cb,$
)'+&))+!$%
Bm`cb,$
)'+&$**!$%
Bm`cb((
)'+&$**!$&
Bm`cb,$
)'+&$+)!$&
Bm`cb((<8
)'+&$+)!$'
Other accessories
Felt
All-round filter for normal conditions. Also for vey dusty and dy
conditions. The material is polyester fibre cloth. Cleaned using soap and
water. Does not withstand immense cold, feezes easily. The filtering
capacity is 30μ (micron), i.e. particles smaller than 30μ pass through the
filter.
136, 141
55
362XP, 365, 372XP
530 02 98-11
503 60 83-01
503 81 45-03
340, 345, 350, 353, 346XP
357XP, 359
385XP
537 02 40-03
537 01 09-03
537 01 47-03
353, 346XP ser.nr. <0342xxxxx
61, 281XP, 288XP
3120XP
537 26 49-03
501 80 71-05
503 89 53-01
Felt HD
For extremely dusty conditions, e.g. burnt down forest, close to sandy
beaches, roads or quarries. The material is polyester fibre cloth. Cleaned
using soap and water. Does not withstand immense cold, feezes easily. The
filtering capacity is 30μ (micron), i.e. particles smaller than 30μ pass
through the filter.NOTE! HD filters (Heavy Duty) require a larger filter
cover or cylinder cover.
362XP, 365, 372XP
385XP
503 81 80-01
537 00 93-01
281XP, 288XP
395XP
503 55 12-71
503 70 89-01
110
Nylon 44
All-round filter for normal and humid conditions. The material is woven
nylon fabric. Cleaned using soap and water. The filtering capacity is 44μ
(micron), i.e. particles smaller than 44μ pass through the filter.
334T, 338XPT
503 96 72-01
537 26 49-02
(52μ) 336, 339XP
357XP, 359
385XP
537 07 61-01
537 01 09-02
537 01 47-02
340, 345, 350, 353, 346XP
362XP, 365, 372XP
281XP, 288XP
537 02 40-02
503 81 45-02
501 80 71-06
Nylon 44 HD
All-round filter for normal and humid conditions. The material is woven
(micron), i.e. particles smaller than 44μ passthrough the filter.NOTE! HD
filters (Heavy Duty) require a larger filter cover or cylinder cover.
362XP, 365, 372XP
395XP
503 81 80-03
503 70 89-03
Nylon 80
Winter filter for humid and/or cold conditions. The material is woven
(micron), i.e. particles smaller than 80μ pass through the filter.
136, 141
362XP, 365, 372XP
530 02 99-08
537 26 49-01
503 81 45-01
336, 339XP
55
385XP
537 07 61-02
503 60 83-02
537 01 47-01
340, 345, 350, 353, 346XP
357XP, 359
281XP, 288XP
537 02 40-01
537 01 09-01
501 80 71-01
111
Nylon 80 HD
Winter filter for humid and/or cold conditions. The material is woven
(micron), i.e. particles smaller than 80μ passthrough the filter.NOTE! HD
filters (Heavy Duty) require a larger filter cover or cylinder cover.
362XP, 365, 372XP
281XP, 288XP
503 81 80-02
503 55 12-02
385XP
395XP
537 01 47-71
503 70 89-02
Foam
For extremely dusty conditions, e.g. burnt down forest, close to sandy
beaches, roads or quarries. The material is polyester foam. Cleaned using
soap and water. The foam filter should be oiled after cleaning using a
special air-filter oil. The filtering capacity stops all particles if correct
maintenance and care.
334T, 338XPT
3120XP
503 84 49-01
503 14 18-02
Chainsaw spark plugs
P17Y
PR17Y
531 00 92-27
531 00 92-29
*!3J1I8D-ahhahi!
*!3J1I8D-ahhbbf!
112
113
Technical solutions for
power cutters.
Handheld power cutters are finding more and more applications in the building industry.
Everything from cutting and adjustment of asphalt, stone and concrete to cutting of reinforcement
bar and steel constructions. Apart from having to be extremely well protected from the abrasive
cutting dust, a cutter also has to be easy to operate – often by several different people at the same site.
The handles and the fuel tank are separated from the engine (the two-mass
principle) with steel springs, which means vibrations are extremely low.
The carburettor is also dampened, and has automatic filter compensation.
for easier starts.
Three-stage air-filtering system with Air Injection, plus air filter compensation
provide smoother operation and longer intervals between filter cleanings.
LowVib and a good distance between the handles mean low vibrations,
perfect ergonomics, narrow cuts and reduced blade wear.The blade guard
is easy to adjust while cutting.
Narrow engine body and high
centre of gravity make the power
cutter handy to operate.
Thanks to the adjustable cutting arm, you can make cuts right up against
walls and floors.
The engines for the 3120K and
371K can also be supplied for
modification to other applications.
For instance the 3120K is often
used for rail cutting.
114
Precision-forged, three-piece crankshaft provides maximum durability
even when under great loads.
Power cutters
3120K
Cylinder Volume: 118.8 cm³/7.25 cu.inch. Power: 5.8 kW/7.9 hp.
Fuel tank capacity: 1.25l/2.64 US pint. Blade diameter: 350-400 mm/1416". Sound level: 103 dB(A). Noise emissions, L WA: 117 dB(A).
Vibrations front handle: 4.7 (16") m/s².
Vibrations rear handle: 5.5 (16") m/s².
Weight: 14.0 (16") kg/30.9 (16") lbs.
· Air Injection
· Smart Start
· LowVib
· Three-stage air filtration
· Sealed belt transmission
· Electronic over-rev protection
· Reversible cutting arm
· Easy-adjust blade guard
· Hose kit for wet-cutting
· Air Injection
· Smart Start
· LowVib
· Hose kit for wet-cutting
· Air Injection
· Smart Start
· LowVib
3120K - 14” - W-kit - CE - Worldwide, excl US
and CA
968 28 16-01
*!3J1I8D-aeffhc!
3120K - 16” - W-kit - CE - Worldwide, excl US
and CA
3120K - 16” - W-kit - EPA - US,CA
968 28 26-01
968 28 28-01
*!3J1I8D-afbdic!
*!3J1I8D-aeffeb!
3120K - 14” - W-kit - EPA - US,CA
3120K - Rail cutter - CE - rail cutting engine
968 28 18-01
968 28 41-01
*!3J1I8D-aefffi!
*!3J1I8D-aefeae!
375K
Fuel tank capacity: 0.77l/1.63 US pint. Blade diameter: 350 mm/14".
Vibrations front handle: 2.7 m/s². Vibrations rear handle: 4.6 m/s².
375K - 14" - W-kit - CE - Worldwide, excl US,
CA
375K - 14" - W-kit - EPA- US,CA
968 27 62-01
968 27 64-01
*!3J1I8D-ahiifd!
*!3J1I8D-ahiieg!
371K
Fuel tank capacity: 0.77l/1.62 US pint. Blade diameter: 300 mm/12".
371K - 12” - CE - Worldwide, excl US and CA
968 27 32-01
*!3J1I8D-aedajh!
371K - 12” - EPA - US,CA
371K - engine only - CE - Worldwide, excl US
and CA
968 27 34-01
968 27 39-01
*!3J1I8D-aedbba!
*!3J1I8D-ahjajg!
115
K 750
Motor: Air cooled, 2 stroke engine. Cylinder Volume: 74 cm³/4.5 cu.
inch. Power: 3.7 kW/5.0 hp. Fuel tank capacity: 0.9l/1.9 US pint.
Blade diameter: 300/350 mm/12/14". Depth of cut: 100/125 mm/4/5".
Vibrations front handle: 3.2/3.0 m/s². Vibrations rear handle: 4.6/5.0 m/
s².
K 750, blade guard 300 mm/ 12”, arbor 20
965 14 17-01
965 14 21-01
K 750, blade guard 300 mm/ 12”, arbor 25.4
965 14 19-01
965 14 22-01
965 14 20-01
965 14 23-01
· Dual charge
· Active Air Filtration
· SmartCarb
· DuraStarter
· EasyStart
· Sealed transmission
· Wet cutting kit
· SmartCarb
· DuraStarter
· EasyStart
· Wet cutting kit
K 950
Blade diameter: 300/350/400 mm/12/14/16".
Depth of cut: 100/125/145 mm/4/5/6". Sound level: 103 dB(A).
Noise emissions, L WA: 116 dB(A).
Vibrations front handle: 7.9/6.2/6.2 m/s².
Vibrations rear handle: 9.5/9.0/8.3 m/s².
Weight: 9.9/10.3/11.2 kg/21.8/22.7/24.7 lbs.
K 950, blade guard 300 mm /12”, arbor 20
965 14 06-01
965 14 10-01
965 14 07-01
965 14 11-01
965 14 08-01
965 14 12-01
965 14 09-01
965 14 13-01
965 14 04-01
116
K 1250
Vibrations front handle: 4.9/5.1 m/s². Vibrations rear handle: 6.3/5.2 m/
s². Weight: 13.3 /14.4 kg/30 /31.7 lbs.
968 29 42-01
968 29 52-01
968 29 44-01
968 29 54-01
968 29 45-01
968 29 55-01
· SmartCarb
· EasyStart
K 3000 Electric
Motor: electric. Rated output, 230 V: 2700W.
Weight: 8.8 /8.9 kg.
K 3000 Electric, mm/inch 300/12
K 3000 Electric, mm/inch 350/14
968 37 52-01
968 37 62-01
117
· Elgard /Electronic over-load protection
· Electronic Softstart
· Pulling rotation
· Wet cutting kit
Specifications for power cutters
3 1 20 K
3 75 K
3 71 K
118.8 cm³ /7.25 cu.inch
74.7 cm³ /4.6 cu.inch
70.7 cm³ /4.3 cu.inch
5.8 kW /7.9 hp
3.7 kW /5.0 hp
3.5 kW /4.8 hp
1.25l /2.64 US pint
0.77l /1.63 US pint
0.77l /1.62 US pint
350-400 mm /14-16"
350 mm /14"
300 mm /12"
Sound level
103 dB(A)
102 dB(A)
102 dB(A)
117 dB(A)
116 dB(A)
115 dB(A)
Vibrations front handle
4.7 (16") m/s²
2.7 m/s²
3.0 m/s²
Motor
Cylinder Volume
Power
Rated output, 230 V
Fuel tank capacity
Blade diameter
Depth of cut
Vibrations rear handle
5.5 (16") m/s²
4.6 m/s²
4.0 m/s²
14.0 (16") kg/30.9 (16") lbs
9.7 kg /21.4 lbs
9.4 kg /20.7 lbs
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Dual charge
–
–
–
Active Air Filtration
–
–
–
SmartCarb
–
–
–
DuraStarter
–
–
–
EasyStart
–
–
–
Easy-adjust blade guard
–
–
–
Reversible cutting arm
–
–
–
Sealed transmission
–
–
–
Wet cutting kit
–
–
–
Elgard /Electronic over-load protection
–
–
–
Electronic Softstart
–
–
–
Pulling rotation
–
–
–
Weight
Air Injection
Smart Start
LowVib
Three-stage air filtration
Sealed belt transmission
Electronic over-rev protection
Reversible cutting arm
Easy-adjust blade guard
Hose kit for wet-cutting
(•) option
118
–
K 750
K 950
K 1 2 50
K 30 0 0 E l e c t r i c
Air cooled, 2 stroke engine
electric
119 cm³ /7.25 cu.inch
3.7 kW /5.0 hp
4.5 kW /6.1 hp
5.8 kW /7.8 hp
0.9l /1.9 US pint
1.0l /2.65 US pint
1.25l /2.65 US pint
300/350 mm /12/14"
300/350/400 mm/12/14/16"
350/400 mm /14/16"
300/350 mm /12/14"
100/125 mm /4/5"
100/125/145 mm/4/5/6"
125/145 mm /5/6"
100/125 mm /4/5"
2700W
97 dB(A)
103 dB(A)
102 dB(A)
95 dB(A)
113 dB(A)
116 dB(A)
118 dB(A)
108 dB(A)
3.2/3.0 m/s²
7.9/6.2/6.2 m/s²
4.9/5.1 m/s²
3.7 m/s²
4.6/5.0 m/s²
9.5/9.0/8.3 m/s²
6.3/5.2 m/s²
4.2 m/s²
9.9/10.3/11.2 kg/21.8/22.7/24.7 lbs
13.3 /14.4 kg/30 /31.7 lbs
8.8 /8.9 kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
–
–
–
•
•
•
•
•
•
•
•
•
•
–
–
–
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
•
•
•
(•) option
119
–
–
–
–
–
Power cutters accessories
Diamond cutting disc
High quality discs approved for dry and wet cutting.
PREMIUM HDC 410 12“ / Ø300mm
PREMIUM HPC 412 16“ / Ø400mm
PREMIUM HPA 912 14“ / Ø350mm
506 29 46-02
544 35 78-03
544 35 79-02
*!3J1I8D-aedeff!
*!3J1I8D-beddai!
*!3J1I8D-beddcc!
PREMIUM HDA 900 12“ / Ø300mm
506 29 46-04
506 29 47-02
544 35 79-03
*!3J1I8D-aedegc!
*!3J1I8D-aedebh!
*!3J1I8D-bedddj!
VALUE HVG 310 12” / Ø300mm
506 29 46-06
506 29 47-04
544 23 87-01
*!3J1I8D-aedehj!
*!3J1I8D-aedece!
*!3J1I8D-bdjhja!
VALUE HVG 310 14” / Ø350mm
544 35 78-01
506 29 47-06
544 23 87-02
*!3J1I8D-bedcif!
*!3J1I8D-aededb!
*!3J1I8D-bdjiag!
CHOICE HCC 480 16” / Ø400mm
544 35 78-02
544 35 79-01
544 37 90-01
*!3J1I8D-bedcjc!
*!3J1I8D-beddbf!
*!3J1I8D-bdjhja!
Abrasive discs, steel
Approved for high speed cutting in steel.
12“ / Ø300mm / Ø20 mm
16“ / Ø400mm / Ø20 mm
506 36 79-02
506 36 79-06
*!3J1I8D-ahgigg!
*!3J1I8D-ahgiia!
14“ / Ø350mm / Ø20 mm
12“ /Ø300mm / Ø22 mm
14“ /Ø350mm / Ø22 mm
506 36 79-04
506 36 79-12
506 36 79-14
*!3J1I8D-ahgihd!
*!3J1I8D-ahgijh!
120
*!3J1I8D-ahgjad!
Abrasive discs, concrete
Approved for high speed cutting in stone/concrete/asphalt/brick.
12“ / Ø300mm / Ø20 mm
14“ / Ø350mm / Ø20 mm
16“ / Ø400mm / Ø20 mm
506 36 78-02
506 36 78-04
506 36 78-06
*!3J1I8D-ahgidf!
*!3J1I8D-ahgiec!
Carbide tipped disc (Rescue disc)
Steel disc with soldered carbide cutting tips called rescue disc. Maximum
peripheral speed 80-100 m/s. Made for cutting in materials as wood, thin
steel plate and aluminium. This disc may only be used in emergencies by
specially trained personnel.
12“ / Ø300mm / Ø22,2 mm
506 22 30-09
*!3J1I8D-adcice!
Cutting trolley
KV 03 cutting trolley is designed for convenient and efficient long cuts in
asphalt and concrete floors. K 950 and K 1250 can be installed quicklyand
easily. This means the cutter can be used fora widerrange of jobs, making it
even more useful and versatile.
Cutting trolly
506 29 54-12
*!3J1I8D-aeefbd!
Water tank
15 litres. Supplied with large filler opening and quick couplings.
Water Tank
506 29 55-12
*!3J1I8D-aeefic!
121
*!3J1I8D-ahgifj!
Hose kit
For mounting on power cutter blade guard. Connects to standard water
hose or separate water tank for wet cutting.
506 32 89-13
*!3J1I8D-bajibg!
Motor kit
The engine kit comprises a complete crankcase withassembled crankshaft,
piston and cylinder. The engine kit is useful in the event of urgent repairs.
K 950
K 1250
K 750
506 23 58-73
544 90 44-02
544 88 90-04
Transport boxes
Our transport boxes are handy accessories, both to protect machines and
equipment, and to keep track of the equipment when moving between
worksites. They can accommodate machines as well as blades and personal
safety equipment. Made of plywood, with metal reinforcement at edges
and corners.
K 1250, K 950, K 750
K 3000
506 31 08-02
506 39 95-23
Wet cutting kit
For older power cutters, a wet cutting kit is available as an accessory. The
nozzles distribute the water evenly over theblade, and the valve that is
mounted on the front handle allows convenient regulation of the water
during operation.
Wet cutting kit
544 00 31-03
122
Water hose
This waterhose is connected witha quickconnectionto the wet cutting kit.
The quick connection at the other end connects to Husqvarna’s
pressurised water tank or another water supply. The hose is 9 m long and
multiple sections can be joined together
000 00 00-00
Cutting trolley, KV 03
KV 03 cutting trolley is designed for convenient and efficient long cuts in
asphalt and concrete floors. K 950 and K 1250 can be installed quicklyand
easily. This means the cutter can be used fora widerrange of jobs, making it
even more useful and versatile.
K 750
K 950
K 1250
506 29 54-04
506 36 57-01
506 36 58-01
123
Cutting discs.
Diamond cutting discs
Part No.
Diameter,
outer / inner
Hard
brick
Reinforced
Fat
high-grade
concrete
concrete
Normal
concrete
Concrete
pipes
Lean
concrete,
blocks
Porous
brick
Green
concrete
HDC 410
506 29 46-02
300–20 mm
506 29 46-04
350–20 mm
506 29 46-06
400–20 mm
HDC 500
506 29 48-02
300–20 mm
506 29 48-04
350–20 mm
HDA 900
506 29 47-02
300–20 mm
506 29 47-04
350–20 mm
506 27 47-06
400–20 mm
305 mm = 12", 355 mm = 14", 405 mm = 16".
Diamond cutting disc
High quality discs approved for dry and wet cutting.
Diamond cutting discs
Outer diameter
Inner diameter
HDC 410 12"
Ø300mm
Ø20 mm
506 29 46-02
HDC 410 14"
Ø350mm
Ø20 mm
506 29 46-04
HDC 410 16"
Ø400mm
Ø20 mm
506 29 46-06
HDC 500 12"
Ø300mm
Ø20 mm
506 29 48-02
HDC 500 14"
Ø350mm
Ø20 mm
506 29 48-04
HDC 900 12"
Ø300mm
Ø20 mm
506 29 47-02
HDC 900 14"
Ø350mm
Ø20 mm
506 29 47-04
HDC 900 16"
Ø400mm
Ø20 mm
506 29 47-06
124
Art.nr
Asphalt
Abrasive discs
Approved for high speed cutting in steel.
Abrasive discs, concrete
Approved for high speed cutting in stone/concrete/asphalt/brick.
Abrasive discs steel
Outer diameter
Inner diameter
Art.nr
12"
Ø300mm
Ø20 mm
506 36 79-02
14"
Ø350mm
Ø20 mm
506 36 79-04
16"
Ø400mm
Ø20 mm
506 36 79-06
12"
Ø300mm
Ø22 mm
506 36 79-12
14"
Ø350mm
Ø22 mm
506 36 79-14
Abrasive discs concrete
Outer diameter
Inner diameter
12"
Ø300mm
Ø20 mm
506 36 78-02
14"
Ø350mm
Ø20 mm
506 36 78-04
16"
Ø400mm
Ø20 mm
506 36 78-06
Art.nr
Carbide tipped disc (Rescue disc)
Steel disc with soldered carbide cutting tips called rescue disc. Maximum
peripheral speed 80–100 m/s. Made for cutting in materials as wood,
thin steel plate and aluminium. This disc may only be used in emergencies
by specially trained personnel.
Carbide tipped disc
Outer diameter
Inner diameter
12"
Ø300mm
Ø22,2 mm
125
Art.nr
506 22 30-09
Technical solutions for forestry
clearing saws and brushcutters.
Forestry clearing saws and brushcutters are machines that are carried by the user during operation,
and they are used for very long periods. This places special demands on ergonomics, to make
sure the load on the user is minimised. The long shifts, where the machines are often operated
continually and at full power, also demand very much, in terms of reliability and durability.
E-TECH. Engines with high power, low weight, and reduced emissions and noise
levels.The E-TECH II engines feature even higher torque, lower noise levels and
they meet the world’s strictest emission requirements, CARB II.
LowVib. Efficiently reduced vibrations as a result of the engine and handle
being separated with insulating dampers.
Centre Gravity Engine.The tank is located in front of the engine for optimal
balance and manoeuvrability. (340 series.)
Automatic Smart Start automatically reduces the compression at the moment
of starting, making it easier to start the engine.
Cast crankshaft and cast, 3-piece
connecting rod, for long product life.
The engines are designed to produce
high power, in combination with
low weight.
Fuel pump for easier starts and a transparent tank on most models.
126
Ergonomically designed handles provide a natural, firm grip.The wing nut makes
it easy to adjust the handle.
The machines have an asymmetrical handlebar, angled 7° in relation to the shaft,
for better control and a comfortable working position.
The thumb-operated throttle control
makes it easy to adjust the rpms,
and you save your own energy as
well, by using your hand’s strongest
muscle – the thumb muscle.
The 345FXT is the first forestry clearing saw in the world with thermostatcontrolled heating in the handles.
Trio-Balance distributes the weight between the shoulders, chest, hips and back,
so you can work with fewer strenuous motions.
127
Ergo-Cruise, ergonomic handle with
cruise control and other facilitating
functions.
Forestry Clearing Saws
240F
Vibration idling left/right min: 2.3/2.5 m/s². Vibration idling left/
right max: 3.2/3.5 m/s². Vibration top speed left/right min: 3.3/3.5 m/
s². Vibration top speed left/right max: 4.8/5.4 m/s². Sound level, min/
max: 100 dB(A)/104 dB(A). Noise emission, L WA: 114 dB(A).
· LowVib
· Adjustable handlebar/handle, wing
nut
· Soft grips
· Thumb-operated throttle
· Duo-Balance 55, harness
· LowVib
nut
· Offset post
· Comfort handles
· Transparent fuel tank
· Easy switch of cutting equipment
· Trio-Balance, harness
· Fuel pump
· Smart Start
· E-TECH
· LowVib+
nut
· Offset post
· Comfort handles
· Soft grips
· Fuel pump
Scarlett 200-22 (1"), All countries except
USA, CAN & AUS
968 09 41-01
*!3J1I8D-ahjbea!
343F
Maxi 225-24 (1"), CAN, AUS, NZ
968 00 12-02
*!3J1I8D-aiagjg!
Scarlett 225-24 (1"), USA 50 ex Lowes
Scarlett 200-22 (1"), All other
968 00 12-01
968 00 11-01
*!3J1I8D-ahjach!
*!3J1I8D-ahegdd!
345Fx
Maxi 225-24 (1"), CAN
968 00 02-02
*!3J1I8D-aiahbj!
Scarlett 225-24 (1"), USA 50 ex Lowes
968 00 02-01
968 00 01-01
*!3J1I8D-ahjaad!
*!3J1I8D-ahegcg!
128
345Fxt
Maxi 225-24 (1"), CAN
968 00 07-02
968 00 06-01
*!3J1I8D-aiahcg!
· Smart Start
· E-TECH
· LowVib+
nut
· Offset post
· Comfort handles
· Soft grips
· Thermostat-controlled heating in
the handles
· Fuel pump
· LowVib
nut
· Soft grips
*!3J1I8D-ahegbj!
252RX
Maxi 225-24 (1"), CAN, AUS, NZ
968 07 24-01
968 07 21-02
*!3J1I8D-afghgj!
*!3J1I8D-addiid!
Scarlett 225-24 (1"), US50 ex Lowes
968 07 25-01
968 07 21-01
*!3J1I8D-adiehf!
*!3J1I8D-addihg!
265RX
Maximum power speed: 8400 rpm. Fuel tank volume: 1l/2.1 US pint.
Scarlett 225-24, US50 ex Lowes
Maxi 225-24, All other
968 06 13-02
968 06 13-01
*!3J1I8D-afghid!
*!3J1I8D-afghhg!
129
· LowVib
· Soft grips
Specifications for forestry clearing saws
Power
Maximum power speed
Fuel tank volume
Vibration idling left/right min
240F
3 43 F
40.2 cm³ /2.5 cu.inch
45.0 cm³ /2.7 cu.inch
1.8 kW /2.4 hp
2.0 kW /2.7 hp
9000 rpm
9000 rpm
0.80l /1.7 US pint
0.9l /1.9 US pint
2.3 /2.5 m/s²
3.7 /4.5 m/s²
Vibration idling left/right max
3.2 /3.5 m/s²
4.0 /4.7 m/s²
Vibration top speed left/right min
3.3 /3.5 m/s²
2.1 /2.3 m/s²
Vibration top speed left/right max
4.8 /5.4 m/s²
2.5 /2.7 m/s²
100 dB(A) /104 dB(A)
99 dB(A) /104 dB(A)
114 dB(A)
116 dB(A)
Weight
8.4 kg /18.5 lbs
7.9 kg /17.4 lbs
Smart Start
–
–
E-TECH
–
–
LowVib+
–
–
LowVib
•
•
•
•
•
•
Adjustable handlebar/handle, wing nut
Offset post
–
Comfort handles
–
Soft grips
•
•
Thumb-operated throttle
–
•
•
Transparent fuel tank
–
Thermostat-controlled heating in the handles
–
–
Easy switch of cutting equipment
–
Trio-Balance, harness
–
•
•
Duo-Balance 55, harness
•
–
Fuel pump
–
•
(•) option
130
3 4 5F x
3 45 F xt
25 2R X
265 RX
43.0 cm³ /2.6 cu.inch
43.0 cm³ /2.6 cu.inch
50.8 cm³ /3.1 cu.inch
65.1 cm³ /4.0 cu.inch
2.1 kW /2.9 hp
2.1 kW /2.9 hp
2.4 kW /3.3 hp
3.0 kW /4.1 hp
9600 rpm
9600 rpm
9000 rpm
8400 rpm
0.9l /1.9 US pint
0.9l /1.9 US pint
0.8l /1.7 US pint
1l /2.1 US pint
3.6 /4.0 m/s²
3.6 /4.0 m/s²
3.0 /2.8 m/s²
4.5 /4.0 m/s²
4.0 /4.5 m/s²
4.0 /4.5 m/s²
4.5 /3.9 m/s²
5.1 /4.6 m/s²
1.0 /1.1 m/s²
1.0 /1.1 m/s²
1.2 /1.4 m/s²
3.0 /3.9 m/s²
1.4 /1.7 m/s²
1.4 /1.7 m/s²
1.6 /1.7 m/s²
3.9 /5.1 m/s²
98 dB(A) /104 dB(A)
98 dB(A) /104 dB(A)
96 dB(A) /103 dB(A)
98 dB(A) /100 dB(A)
116 dB(A)
116 dB(A)
114 dB(A)
116 dB(A)
7.8 kg /17.2 lbs
7.9 kg /17.4 lbs
8.9 kg /19.6 lbs
10.8 kg /23.8 lbs
•
•
•
•
•
•
–
–
–
–
–
–
–
–
•
•
•
•
•
•
•
–
–
–
–
•
•
•
•
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
•
•
–
–
–
–
•
•
–
–
–
(•) option
131
–
Brushcutters
125RJ
Cylinder displacement: (28.0) cm³/(1.7) cu.inch. Power: (0.8) kW/
(1.1) hp. Maximum power speed: (8000) rpm. Fuel tank volume: (0.4)l/
(0.85) US pint. Vibration idling left/right min: (3.0)/(5.0) m/s².
Vibration idling left/right max: (6.0)/(8.0) m/s².
Vibration top speed left/right min: (7.0)/(6.0) m/s².
Vibration top speed left/right max: (10.0)/(9.0) m/s². Sound level, min/
max: (94) dB(A)/(97) dB(A). Noise emission, L WA: (115) dB(A).
Weight: (4.8) kg/(10.6) lbs.
· Smart Start
· E-TECH
· Fuel pump
· Combination guard
· Auto return stop switch
· Smart Start
· Low weight
· Fuel pump
· Comfort handles
Grass 255-4(1")+T25, US50 ex Lowes
952 71 56-59
*!3J1I8D-bfhgea!
Grass 255-4(1")+T25, EU, NO, CH
Grass 255-4(1")+T25, All other
952 71 56-61
952 71 56-62
*!3J1I8D-bffghh!
*!3J1I8D-bffgie!
Grass 255-4(1")+T25, AUS, NZ
Grass 255-4(1")+T25, CAN
952 71 56-63
952 71 56-60
*!3J1I8D-bffgjb!
*!3J1I8D-bfhgfh!
323RJ
T25(L) + Grass 255-4 (1”), All ex US50
968 04 81-02
*!3J1I8D-afhaje!
132
325RJx
· Smart Start
· E-TECH
· Low weight
· Fuel pump
nut
· Comfort handles
· Soft grips
· Armrests
· Smart Start
· E-TECH II
· X-TORQ
· Fuel pump
· Comfort handles
· Smart Start
· E-TECH II
· X-TORQ
· Fuel pump
· Comfort handles
· Soft grips
T35 + Grass 255-4 (1”), All ex US50
968 03 41-01
*!3J1I8D-aeecbg!
333RJ
T35 M12 + Grass 255-4 (1"), All ex US50,
AUS, NZ, CAN
T35 M12 + Grass 255-4 (1"), AUS, NZ, CAN
966 77 41-01
966 77 41-02
*!3J1I8D-aicgdi!
*!3J1I8D-behacd!
335RJx
T35X M12+Grass 255-4 (1"), All ex US50,
CAN, AUS, NZ
966 77 21-01
*!3J1I8D-aicgef!
T35X M12+Grass 255-4 (1"), US50 ex Lowes
T35X M12+Grass 255-4 (1"), CAN, AUS, NZ
966 77 22-01
966 77 22-02
*!3J1I8D-aicjjh!
*!3J1I8D-behigd!
133
132RJ
Maximum power speed: 6500 rpm. Fuel tank volume: 1.0l/2,1 US pint.
max: 93.5 dB(A)/94.5 dB(A). Noise emission, L WA: 114 dB(A).
· Low weight
· Fuel pump
Grass 255-4 (1"), IT,SL
968 52 41-01
*!3J1I8D-aicccf!
142RJ
· Low weight
· Fuel pump
Auto 55 (1"), IT
968 55 12-01
*!3J1I8D-ahfebi!
152RJ
Auto 55 (1"), IT
968 55 41-01
*!3J1I8D-ahfecf!
134
· Low weight
· Fuel pump
125R
· Smart Start
· E-TECH
· Low weight
· Fuel pump
· Assymetrical handle bar
· Smart Start
· Fuel pump
· Smart Start
· Low weight
· Fuel pump
· Comfort handles
T25+Grass 255-4 (1"), AUS, NZ
952 71 54-81
*!3J1I8D-bdfdgf!
T25+Grass 255-4 (1"), EU + NO+ CH
T25+Grass 255-4 (1"), CAN
952 71 54-82
952 71 56-32
*!3J1I8D-bdfdhc!
*!3J1I8D-beceaa!
T25+Grass 255-4 (1"), US50 ex Lowes
T25+Grass 255-4 (1"), All other
952 71 54-80
952 71 56-19
*!3J1I8D-bdfdfi!
*!3J1I8D-bdjhgj!
223R
T25 + Grass 255-4 (1"), All ex US50, CAN
965 08 08-01
*!3J1I8D-bdgebg!
323R
T35 + Grass 255-4 (1”), US49
T25(L) + Grass 255-4 (1”), All ex US50
968 04 75-02
968 04 71-01
*!3J1I8D-bdiaef!
*!3J1I8D-aiafdf!
135
325Rx
· Smart Start
· E-TECH
· Low weight
· Fuel pump
nut
· Comfort handles
· Soft grips
· Ergo-Cruise, cruise control
· Smart Start
· E-TECH II
· Low weight
· Fuel pump
nut
· Comfort handles
· Soft grips
· Smart Start
· E-TECH II
· Fuel pump
nut
· Comfort handles
· Soft grips
T35 + Grass 255-4 (1”), All ex US50
968 03 31-01
*!3J1I8D-adiige!
326Rx
T 35 + Grass 255-4 (1”), US50 ex Lowes
T35 + Grass 255-4 (1”), CAN
968 05 35-01
968 05 31-01
*!3J1I8D-adijih!
*!3J1I8D-adijha!
324Rx
Cylinder displacement: 25,0 cm³/1,5 cu.inch. Power: 0.8 kW/1.1 hp.
Weight: 5.5 kg/12,1 lbs.
T 35 + Grass 255-4 (1”), All ex US50, AUS, NZ
T 35 + Grass 255-4 (1”), AUS+NZ
968 05 62-01
968 05 62-04
*!3J1I8D-aiaaeh!
*!3J1I8D-bdeffj!
136
325RDx
· Smart Start
· E-TECH
· Low weight
· Fuel pump
· Two-piece shaft
nut
· Comfort handles
· Soft grips
· Smart Start
· E-TECH II
· X-TORQ
· Fuel pump
· Elevated offset post
nut
· Comfort handles
· Smart Start
· E-TECH II
· X-TORQ
· Fuel pump
· LowVib
nut
· Comfort handles
· Soft grips
T 35 + Grass 255-4 (1”), All ex US50
968 03 38-01
*!3J1I8D-ahbhhj!
333R
T35+Multi 300-3 (1"), All ex US50, CAN,
AUS, NZ
966 77 31-01
*!3J1I8D-aicgfc!
T35+Multi 300-3 (1"), US49 ex Lowes
T35+Multi 300-3 (1"), CAN, AUS, NZ
966 77 31-03
966 77 31-02
*!3J1I8D-bdbcdh!
*!3J1I8D-bdaefc!
335Rx
T35X+Multi 300-3 (1"), All markets except
US -1pack
966 77 12-01
*!3J1I8D-aicggj!
T35X+Multi 300-3 (1"), CAN, AUS, NZ
966 77 12-03
*!3J1I8D-bedcgb!
T35X + Multi 300-3 (1"), US only -1-pack
T35X+Multi 300-3 (1"), All ex US50, CAN,
AUS, NZ
966 77 12-02
966 77 12-04
*!3J1I8D-aicjhd!
*!3J1I8D-bedchi!
137
232R
Multi 275-4 (1”), US49 ex Lowes
T35, Multi 275-4 (1"), All ex US50
968 02 16-12
968 02 15-13
*!3J1I8D-adhaeb!
· E-TECH
· Fuel pump
· LowVib
nut
· E-TECH
· Fuel pump
· LowVib
nut
· E-TECH
· Fuel pump
· LowVib
nut
*!3J1I8D-aefdib!
235R
Multi 300-3 (1”), US49 ex Lowes
T35, Multi 300-3 (1”), All ex US50
968 02 06-02
968 02 05-15
*!3J1I8D-bdiegf!
*!3J1I8D-bdieeb!
235FR
(1) US pint. Vibration idling left/right min: (2.2)/(2.7) m/s².
Weight: (7.3) kg/(16.1) lbs.
T35+Multi 300-3 (1")+Scarlett 200-22 (1"),
All ex US50
965 14 79-01
*!3J1I8D-beigff!
138
240R
Weight: 8.6 kg/19 lbs.
· LowVib
· Adjustable handlebar/handle, wing nut
T45, Multi 300-3 (1"), All ex US50, CAN,
AUS, NZ
968 09 11-03
*!3J1I8D-aaeiid!
343R
Multi 300-3 (1") + T45, Duo-Balance 55, S Am,
S Afr
968 08 26-01
*!3J1I8D-aicbcg!
Multi 300-3 (1") + T45, Duo-Balance 55,
Brazil
Multi 300-3 (1") + T45, US50 ex Lowes
968 08 26-02
968 08 22-01
*!3J1I8D-bcjbia!
*!3J1I8D-ahjaeb!
Multi 300-3 (1") + T45, CAN, AUS, NZ
Multi 300-3 (1") + T45, All other
968 08 22-02
968 08 21-01
*!3J1I8D-aiahac!
*!3J1I8D-ahegfh!
139
· Fuel pump
· LowVib
nut
· Comfort handles
343FR
(1.9) US pint. Vibration idling left/right min: (3.7)/(4.5) m/s².
Weight: (7.9) kg/(17.4) lbs.
Multi 300-3 (1") + Scarlett 200-22 (1")+ T45 US50 ex Lowes
Shredder blade (1"), All ex US50
965 10 21-03
965 10 21-04
*!3J1I8D-behafe!
· Comfort handles
· Smart Start
· E-TECH
· Low weight
· Fuel pump
· LowVib+
nut
· Comfort handles
· Soft grips
*!3J1I8D-bfgfee!
Multi 300-3 (1") + Scarlett 200-22 (1")+ T45 CAN, AUS, NZ
Multi 300-3 (1") + Scarlett 200-22 (1")+ T45,
All other
965 10 21-02
965 10 21-01
*!3J1I8D-behaeh!
· E-TECH
· Fuel pump
· LowVib
nut
*!3J1I8D-behada!
345Rx
Multi 300-3 (1") + T45, US50 ex Lowes
Multi 300-3 (1") + T45, All other
968 08 12-01
968 08 11-01
*!3J1I8D-ahjade!
*!3J1I8D-ahegea!
250R
Trimmy SII + Multi 300-3 (1"), All ex US50,
CAN, AUS, NZ
968 07 41-01
*!3J1I8D-acgfhb!
140
· LowVib
· Adjustable handlebar/handle, wing nut
132R
s². Vibration top speed left/right max: 7.5/7.6 m/s².
Grass 255-4, South America only
Grass 255-4, South Africa only
968 52 11-12
968 52 11-13
*!3J1I8D-aecdae!
· Fuel pump
*!3J1I8D-aecddf!
133R
· Fuel pump
Grass 255-4 (1")+T35, Spain, Portugal
965 08 09-01
*!3J1I8D-bdgibc!
Grass 255-4 (1")+T35, Italy, Greece, UK
965 08 09-03
*!3J1I8D-bdgidg!
Grass 255-4 (1")+T35 , Germany, France,
Holland
Grass 255-4 (1")+T35, South America
965 08 09-02
965 08 09-04
*!3J1I8D-bdgicj!
*!3J1I8D-bgdcdi!
142R
Grass 255-4, South America only
Grass 255-4, Colombia only
968 55 11-01
968 55 11-02
*!3J1I8D-aefdji!
*!3J1I8D-ahbagj!
141
· Fuel pump
143R
Multi 275-4(1")+T45, Spain, Italy
Multi 275-4(1")+T45, Turkey, Russia, Serbia
Montenegro
965 07 02-01
965 07 02-04
*!3J1I8D-bddcjd!
Multi 275-4(1")+T45, Germany, France,
Holland
965 07 02-02
*!3J1I8D-bdddaj!
· Fuel pump
*!3J1I8D-bdgiaf!
Multi 275-4(1")+T45, Russia, Bulgaria, Poland
965 07 02-05
*!3J1I8D-beebcb!
Multi 275-4(1")+T45,Estonia, Latvia, Lithua-
Multi 275-4(1")+T45, Italy, Greece, UK
nia
Multi 275-4(1")+T45, Romania, Czech rep.
Multi 275-4(1")+T45, South America
965 07 02-03
965 07 02-06
965 07 02-07
965 07 02-08
*!3J1I8D-bdddbg!
*!3J1I8D-beebdi!
*!3J1I8D-beebef!
153R
T45+Multi 275-4 (1"), ES, PT, S. Am
965 14 77-01
*!3J1I8D-beigdb!
T45+Multi 275-4 (1"), TR, XS, HU
T45+Multi 275-4 (1"), GB, IT, GR
965 14 77-04
965 14 77-03
*!3J1I8D-beigei!
*!3J1I8D-bficba!
142
*!3J1I8D-bgdccb!
Backpack Brushcutters
142RB
Cylinder displacement: 41.5 cm³/2.5 inch³. Power: 1.3 kW/1.8 hp.
max: 95 dB(A)/98 dB(A). Noise_emission, L WA: 117 dB(A).
· Comfortable harness
· Combi guard
T45 + Multi 275-4 (1”) [ES, PT, South Am]
968 55 21-01
*!3J1I8D-aeecgb!
T45 + Multi 275-4 (1”) [DE, FR, NL]
T45 + Multi 275-4 (1”) [IT, GR, GB]
968 55 21-02
968 55 21-03
*!3J1I8D-aeechi!
*!3J1I8D-aeecif!
152RB
Cylinder displacement: 50.2 cm³/3.1 inch³. Power: 1.5 kW/2.0 hp.
max: 95 dB(A)/98 dB(A). Noise_emission, L WA: 117 dB(A).
T45 + Multi 275-4 (1”) [ES, PT, South Am]
968 55 31-01
*!3J1I8D-aeecjc!
T45 + Multi 275-4 (1”) [DE, FR, NL]
T45 + Multi 275-4 (1”) [IT, GR, GB]
968 55 31-02
968 55 31-03
*!3J1I8D-aeedai!
*!3J1I8D-aeedbf!
143
· Comfortable harness
· Combi guard
Specifications for brushcutters
Power
Maximum power speed
1 2 5RJ
323R J
32 5R Jx
333R J
(28.0) cm³ /(1.7) cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
34.6 cm³ /2.1 cu.inch
(0.8) kW /(1.1) hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
1.6 kW /2.2 hp
(8000) rpm
9000 rpm
9000 rpm
8400 rpm
(0.4)l /(0.85) US pint
0.5l /1 US pint
0.5l /1 US pint
0.6l /1.3 US pint
(3.0) /(5.0) m/s²
1.8 /1.4 m/s²
1.5 /1.4 m/s²
2.2 /1.3 m/s²
(6.0) /(8.0) m/s²
3.9 /3.7 m/s²
2.0 /1.8 m/s²
2.2 /1.3 m/s²
(7.0) /(6.0) m/s²
2.7 /5.2 m/s²
2.5 /6.6 m/s²
2.7 /4.8 m/s²
Fuel tank volume
(10.0) /(9.0) m/s²
7.2 /9.8 m/s²
4.9 /8.0 m/s²
3.5 /5.6 m/s²
(94) dB(A) /(97) dB(A)
90 dB(A) /97 dB(A)
94 dB(A) /98 dB(A)
99 dB(A) /100 dB(A)
(115) dB(A)
110 dB(A)
110 dB(A)
116 dB(A)
(4.8) kg /(10.6) lbs
4.2 kg /9.3 lbs
4.5 kg /9.9 lbs
5.9 kg /13.0 lbs
•
•
•
•
•
•
E-TECH II
–
–
–
X-TORQ
–
–
–
•
•
Low weight
–
•
•
•
Weight
Smart Start
E-TECH
–
–
Fuel pump
•
•
•
LowVib+
–
–
–
–
LowVib
–
–
–
–
Elevated offset post
–
–
–
–
Two-piece shaft
–
–
–
–
•
•
•
•
•
•
–
–
•
•
•
Assymetrical handle bar
–
–
–
–
•
•
Combination guard
–
–
Comfort handles
–
•
•
•
–
–
Soft grips
–
–
–
–
•
•
–
Armrests
–
–
–
–
–
–
–
–
–
–
–
–
Ergo-Cruise, cruise control
–
–
–
–
Auto return stop switch
•
•
•
•
(•) option
144
–
33 5 R Jx
1 32 RJ
1 42 R J
1 5 2 RJ
1 25 R
223R
34.6 cm³ /2.1 cu.inch
31.8 cm³ /1.9 cu.inch
41.5 cm³ /2.5 cu.inch
50.2 cm³ /3.1 cu.inch
28.0 cm³ /1.7 cu.inch
24.5 cm³ /1.5 cu.inch
1.6 kW /2.2 hp
0.9 kW /1.2 hp
1.3 kW /1.7 hp
1.5 kW /2.0 hp
0.8 kW /1.1 hp
0.8 kW /1.1 hp
8400 rpm
6500 rpm
6500 rpm
6500 rpm
8000 rpm
9000 rpm
0.6l /1.3 US pint
1.0l /2,1 US pint
1.0l /2.1 US pint
1.0l /2.1 US pint
0.4l /0.85 US pint
0.5l /1.1 US pint
2.4 /1.7 m/s²
3.8 /3.5 m/s²
4.9 /3.9 m/s²
4.9 /3.9 m/s²
1.9 /1.4 m/s²
2.7 /2.5 m/s²
2.4 /1.7 m/s²
3.8 /3.5 m/s²
4.9 /3.9 m/s²
4.9 /3.9 m/s²
1.9 /1.4 m/s²
2.7 /2.5 m/s²
3.8 /4.2 m/s²
4.6 /5.6 m/s²
3.2 /3.6 m/s²
3.2 /3.6 m/s²
3.9 /3.2 m/s²
5.0 /4.6 m/s²
5.3 /5.7 m/s²
5.6 /6.4 m/s²
3.5 /4.4 m/s²
3.2 /3.6 m/s²
5.4 /4.1 m/s²
6.1 /5.9 m/s²
98 dB(A) /100 dB(A)
93.5 dB(A) /94.5 dB(A)
95 dB(A) /96 dB(A)
95 dB(A) /96 dB(A)
94 dB(A) /98 dB(A)
98 dB(A) /98 dB(A)
116 dB(A)
114 dB(A)
113 dB(A)
113 dB(A)
108 dB(A)
110 dB(A)
6.0 kg /13.2 lbs
5.9 kg /13.0 lbs
7.2 kg /15.9 lbs
7.2 kg /15.9 lbs
5.0 kg /11.0 lbs
4.5 kg /9.9 lbs
•
–
–
–
•
–
–
–
–
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
–
–
–
–
–
–
–
–
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
–
–
–
•
•
–
(•) option
145
–
Power
Maximum power speed
32 3 R
32 5Rx
326 Rx
32 4 Rx
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
25,0 cm³ /1,5 cu.inch
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.8 kW /1.1 hp
9000 rpm
9000 rpm
8400 rpm
7000 rpm
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1.1 US pint
2.0 /2.0 m/s²
1.6 /1.4 m/s²
2.5 /2.0 m/s²
1.3 /1.3 m/s²
3.2 /2.7 m/s²
2.0 /2.6 m/s²
3.2 /2.7 m/s²
1.7 /1.6 m/s²
2.2 /2.5 m/s²
2.0 /2.4 m/s²
2.1 /2.4 m/s²
3.1 /2.6 m/s²
Fuel tank volume
6.0 /8.5 m/s²
4.8 /4.0 m/s²
4.0 /7.0 m/s²
5.2 /4.1 m/s²
88 dB(A) /97 dB(A)
94 dB(A) /100 dB(A)
88 dB(A) /97 dB(A)
89 dB(A) /97 dB(A)
110 dB(A)
108 dB(A)
110 dB(A)
106 dB(A)
Weight
4.5 kg /9.9 lbs
4.8 kg /10.6 lbs
4.9 kg /10.8 lbs
5.5 kg /12,1 lbs
Smart Start
•
•
•
E-TECH
–
•
•
–
–
E-TECH II
–
–
•
•
X-TORQ
–
–
–
–
Low weight
•
•
•
•
•
•
–
•
LowVib+
–
–
–
–
LowVib
–
–
–
–
–
–
–
–
Two-piece shaft
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
Fuel pump
–
•
•
•
•
•
•
•
–
–
–
–
Soft grips
–
•
•
•
Armrests
–
–
–
–
–
–
–
–
–
–
–
–
•
–
•
•
•
•
•
•
•
•
•
Combination guard
Comfort handles
(•) option
146
–
32 5 R Dx
3 3 3R
33 5 R x
2 32 R
2 35 R
235FR
24.5 cm³ /1.5 cu.inch
34.6 cm³ /2.1 cu.inch
34.6 cm³ /2.1 cu.inch
30.8 cm³ /1.9 cu.inch
36.3 cm³ /2.2 cu.inch
(36.3) cm³ /(2.2) cu.inch
0.9 kW /1.2 hp
1.6 kW /2.2 hp
1.6 kW /2.2 hp
1.1 kW /1.5 hp
1.3 kW /1.8 hp
(1.3) kW /(1.8) hp
9000 rpm
8400 rpm
8400 rpm
8400 rpm
9000 rpm
(9000) rpm
0.5l /1 US pint
0.6l /1.3 US pint
0.6l /1.3 US pint
0.5l /1 US pint
0.5l /1 US pint
(0.5)l /(1) US pint
1.8 /1.8 m/s²
3.0 /2.8 m/s²
2.0 /1.9 m/s²
2.0 /2.5 m/s²
2.2 /2.7 m/s²
(2.2) /(2.7) m/s²
2.2 /2.6 m/s²
3.2 /3.1 m/s²
2.7 /2.3 m/s²
3.5 /3.5 m/s²
2.7 /4.3 m/s²
(2.7) /(4.3) m/s²
2.0 /2.8 m/s²
2.9 /3.4 m/s²
2.4 /1.8 m/s²
2.2 /2.3 m/s²
3.5 /5.0 m/s²
(3.5) /(5.0) m/s²
4.8 /5.6 m/s²
4.2 /5.1 m/s²
2.7 /2.7 m/s²
5.3 /4.9 m/s²
4.5 /6.2 m/s²
(4.5) /(6.2) m/s²
93 dB(A) /100 dB(A)
96 dB(A) /102 dB(A)
95 dB(A) /102 dB(A)
90 dB(A) /100 dB(A)
92 dB(A) /101 dB(A)
(92) dB(A) /(101) dB(A)
110 dB(A)
113 dB(A)
113 dB(A)
108 dB(A)
110 dB(A)
(110) dB(A)
5.0 kg /11.0 lbs
6.1 kg /13.4 lbs
6.2 kg /13.7 lbs
6.5 kg /14.3 lbs
7.3 kg /16.1 lbs
(7.3) kg /(16.1) lbs
•
•
•
•
–
–
–
–
–
•
•
•
–
•
•
•
•
–
–
–
–
–
–
•
•
–
–
–
–
–
•
•
•
•
•
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
–
–
–
–
•
•
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
•
(•) option
147
Power
Maximum power speed
2 40 R
34 3 R
3 4 3F R
3 45 Rx
40.2 cm³ /2.5 cu.inch
45.0 cm³ /2.7 cu.inch
(45.0) cm³ /(2.7) cu.inch
45.0 cm³ /2.7 cu.inch
1.8 kW /2.4 hp
2.0 kW /2.7 hp
(2.0) kW /(2.7) hp
2.0 kW /2.7 hp
9000 rpm
9000 rpm
(9000) rpm
9000 rpm
0.80l /1.7 US pint
0.9l /1.9 US pint
(0.9)l /(1.9) US pint
0.9l /1.9 US pint
2.1 /2.1 m/s²
3.7 /4.5 m/s²
(3.7) /(4.5) m/s²
2.5 /2.8 m/s²
2.4 /2.8 m/s²
4.0 /4.7 m/s²
(4.0) /(4.7) m/s²
3.0 /3.9 m/s²
2.9 /2.4 m/s²
2.1 /2.3 m/s²
(2.1) /(2.3) m/s²
0.8 /1.2 m/s²
Fuel tank volume
4.0 /3.5 m/s²
2.5 /2.7 m/s²
(2.5) /(2.7) m/s²
1.2 /1.9 m/s²
100 dB(A) /104 dB(A)
99 dB(A) /104 dB(A)
(99) dB(A) /(104) dB(A)
99 dB(A) /104 dB(A)
114 dB(A)
116 dB(A)
(116) dB(A)
116 dB(A)
Weight
8.6 kg /19 lbs
8.2 kg /18.1 lbs
(7.9) kg /(17.4) lbs
7.9 kg /17.4 lbs
Smart Start
–
–
–
E-TECH
–
–
•
•
•
E-TECH II
–
–
–
–
X-TORQ
–
–
–
–
Low weight
–
–
–
Fuel pump
–
•
•
LowVib+
–
–
–
•
•
•
LowVib
•
•
•
•
–
–
–
•
Two-piece shaft
–
–
–
–
–
•
•
•
Combination guard
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Comfort handles
–
–
Soft grips
–
–
–
Armrests
–
–
–
–
–
•
•
•
•
–
–
–
–
–
–
–
–
–
–
•
–
–
–
–
(•) option
148
2 50 R
1 32 R
133R
1 42 R
143R
1 5 3R
48.7 cm³ /3.0 cu.inch
31.8 cm³ /1.9 cu.inch
31.8 cm³ /1.9 cu.inch
41.5 cm³ /2.5 cu.inch
41.5 cm³ /2.5 cu.inch
50.2 cm³ /3.1 cu.inch
2.1 kW /2.9 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
1.3 kW /1.7 hp
1.5 kW /2.0 hp
1.5 kW /2.0 hp
9000 rpm
6500 rpm
6500 rpm
6500 rpm
6500 rpm
6500 rpm
0.8l /1.7 US pint
0.8l /1.7 US pint
0.8l /1.7 US pint
1.0l /2.1 US pint
1.0l /2.1 US pint
1.0l /2.1 US pint
3.4 /3.9 m/s²
2.1 /3.9 m/s²
2.1 /3.9 m/s²
3.9 /4.9 m/s²
3.9 /4.9 m/s²
5.2 /5.4 m/s²
4.4 /4.0 m/s²
2.1 /3.9 m/s²
2.1 /3.9 m/s²
3.9 /4.9 m/s²
3.9 /4.9 m/s²
5.2 /5.4 m/s²
1.2 /1.7 m/s²
5.7 /4.7 m/s²
5.7 /4.7 m/s²
5.1 /4.7 m/s²
5.1 /4.7 m/s²
4.7 /5.8 m/s²
2.2 /2.6 m/s²
7.5 /7.6 m/s²
7.5 /7.6 m/s²
5.9 /5.0 m/s²
5.9 /5.0 m/s²
8.2 /6.4 m/s²
98 dB(A) /104 dB(A)
96 dB(A) /101 dB(A)
114 dB(A)
115 dB(A)
9.2 kg /20.3 lbs
6.1 kg /13.5 lbs
6.1 kg /13.5 lbs
7.4 kg /16.3 lbs
7.4 kg /16.3 lbs
7.7 kg /16.5 lbs
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
–
–
–
–
–
–
–
–
–
•
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
(•) option
149
–
Technical solutions
for trimmers and edgers.
Trimmers and edgers are machines that are used for tidying up, often in environments that can be
sensitive to noise and emissions, as well. The machines must be light and manoeuvrable, so the user
can reach everywhere without strain. Since the work often involves interruptions to move between
sites, the machines must be extra easy to start, even with a warm engine.
LowVib. Efficiently reduced vibrations as a result of the engine and handle being
separated with insulating dampers.
Soft, rubber-coated handles provide superior comfort.
The fuel pump makes the engine very easy to start.Thanks to the transparent
tank, you can see when it’s time to refill.
Cast crankshaft and cast, 3-piece
connecting rod, for long product life.
150
The engines are designed to
produce high power, in combination
with low weight.
Whisper, our patented trimmer
cord, reduces the noise level by
50%.
Several trimmer models are designed so they can also be used for edging.
The edger head is designed for
precision, efficiency and durability.
The guard is specially designed to
prevent clogging by gravel and soil.
The cutouts on the top of the trimmer guard allow better vision of the grass
and the cutting equipment.
Fastening with a single screw, makes the trimmer guard easy to remove.
151
Trimmers
125C
· Smart Start
· E-TECH
· Fuel pump
· Curved shaft, superior control
nut
· Smart Start
· Wrought connecting rod
· E-TECH
· Fuel pump
· Whisper trimmer line
· Curved shaft, superior control
nut
· Soft grips
· Armrests
T25, Lowes 50
952 71 54-87
*!3J1I8D-bdfhcd!
T25, CAN+US 50 ex Lowes
T25, EU+NO+CH
952 71 54-74
952 71 54-75
*!3J1I8D-bdfeea!
*!3J1I8D-bdfefh!
T25, AUS, NZ
T25, All other
952 71 56-13
952 71 56-17
*!3J1I8D-bdigcf!
*!3J1I8D-bdjhef!
325Cx
T25 (R), All ex Calif.
968 03 21-01
*!3J1I8D-adijfg!
152
125L
· Smart Start
· E-TECH
· Fuel pump
· Straight shaft, extended reach
nut
· Smart Start
· E-TECH
· Fuel pump
· Two-piece shaft
nut
· Smart Start
· Fuel pump
T25, Lowes 50
952 71 54-88
*!3J1I8D-bdfdjg!
T25, CAN+US 50 ex Lowes
T25, EU+NO+CH
952 71 54-76
952 71 54-77
*!3J1I8D-bdfdij!
*!3J1I8D-bdfeac!
T25, AUS, NZ
T25, All other
952 71 56-11
952 71 56-18
*!3J1I8D-bdigab!
*!3J1I8D-bdjhfc!
125LDx
Cylinder displacement: 28.0 cm³/1.7 cu.inch. Power: (0.8) kW/(1.1) hp.
Maximum power speed: (8000) rpm.
Fuel tank volume: 0.4l/0.85 US pint. Vibration idling left/
right min: (3.0)/(5.0) m/s². Vibration idling left/right max: (6.0)/
(8.0) m/s². Vibration top speed left/right min: (7.0)/(6.0) m/s².
Weight: (4.9) kg/(10.8) lbs.
T25, CAN+US50 ex Lowes
T25, AUS+NZ
952 71 56-52
952 71 56-12
*!3J1I8D-bfeibg!
*!3J1I8D-bdigbi!
T25, EU, NO, CH
T25, All other
952 71 56-58
952 71 54-79
*!3J1I8D-bfeiaj!
*!3J1I8D-bdfedd!
323L
T25 (L), All ex US 50
968 04 51-01
*!3J1I8D-ahjhee!
T35, Lowes 49
T35, US 49 ex Lowes
966 76 54-93
966 76 54-03
*!3J1I8D-bdffcf!
*!3J1I8D-bdjgeg!
153
325Lx
· Smart Start
· E-TECH
· Fuel pump
nut
· Soft grips
· Armrests
· E-TECH II
· Fuel pump
· Smart Start
· E-TECH II
· Fuel pump
nut
· Soft grips
· Armrests
T35, All markets except USA -1-pack
968 03 11-01
*!3J1I8D-adiifh!
326L
max: 90 dB(A)/97 dB(A). Weight: 4.1 kg/9.0 lbs.
T 35, US 49
T 35, Calif.
966 76 32-04
966 76 32-03
*!3J1I8D-beaddi!
*!3J1I8D-bdiafc!
326Lx
Maximum power speed: 8 400 rpm. Fuel tank volume: 0.5l/1 US pint.
T 35, CAN+US50 ex Lowes
968 05 72-06
*!3J1I8D-bdjghh!
154
324Lx
T35, All ex AUS, NZ
T35, AUS, NZ
968 05 52-01
968 05 52-02
*!3J1I8D-ahjied!
· Smart Start
· E-TECH II
· Fuel pump
nut
· Soft grips
· Smart Start
· Fuel pump
· Two-piece shaft
· Smart Start
· E-TECH
· Fuel pump
· Two-piece shaft
nut
· Soft grips
· Armrests
*!3J1I8D-bdefgg!
323LD
T25 (L), All ex US50
968 04 56-01
*!3J1I8D-ahbgcf!
325LDx
T35, All ex US50
Engine unit, All ex US50
968 03 18-01
968 03 19-01
*!3J1I8D-ahbgdc!
*!3J1I8D-aiagad!
155
324LDx
T35, All ex AUS+NZ
T35, AUS+NZ
968 05 54-01
968 05 54-03
*!3J1I8D-aicafi!
· Two-piece shaft
nut
· Soft grips
· Smart Start
· E-TECH II
· Fuel pump
· Two-piece shaft
nut
· Soft grips
· Armrests
· Smart Start
· E-TECH II
· X-TORQ
· Fuel pump
nut
· Soft grips
*!3J1I8D-bdghic!
Engine unit, All ex AUS+NZ
Engine unit, AUS+NZ
968 05 54-02
968 05 54-04
*!3J1I8D-bdafee!
· Smart Start
· E-TECH II
· Fuel pump
*!3J1I8D-bdghjj!
326LDx
max: 92 dB(A)/97 dB(A). Weight: 4.8 kg/10.6 lbs.
T35, CAN+US50 ex Lowes
Engine unit, CAN+US50 ex Lowes
968 05 18-02
968 05 19-01
*!3J1I8D-ahbhgc!
*!3J1I8D-aiagij!
335Lx
T35 M12, All
966 77 02-01
*!3J1I8D-aicgja!
156
157
Specifications for trimmers
Power
Maximum power speed
125C
32 5 C x
125L
1 2 5 L Dx
24.5 cm³ /1.5 cu.inch
28.0 cm³ /1.7 cu.inch
0.8 kW /1.1 hp
0.9 kW /1.2 hp
0.8 kW /1.1 hp
(0.8) kW /(1.1) hp
8000 rpm
9000 rpm
8000 rpm
(8000) rpm
0.4l /0.85 US pint
0.5l /1 US pint
0.4l /0.85 US pint
0.4l /0.85 US pint
3.0 /5.0 m/s²
2.5 /2.1 m/s²
3.0 /5.0 m/s²
(3.0) /(5.0) m/s²
6.0 /8.0 m/s²
3.2 /2.2 m/s²
6.0 /8.0 m/s²
(6.0) /(8.0) m/s²
7.0 /6.0 m/s²
4.4 /4.2 m/s²
7.0 /6.0 m/s²
(7.0) /(6.0) m/s²
Fuel tank volume
10.0 /9.0 m/s²
6.2 /8.4 m/s²
10.0 /9.0 m/s²
(10.0) /(9.0) m/s²
94 dB(A) /97 dB(A)
92 dB(A) /97 dB(A)
94 dB(A) /97 dB(A)
(94) dB(A) /(97) dB(A)
115 dB(A)
109 dB(A)
115 dB(A)
(115) dB(A)
Weight
4.4 kg /9.7 lbs
4.1 kg /9.0 lbs
4.8 kg /10.6 lbs
(4.9) kg /(10.8) lbs
Smart Start
•
•
•
Wrought connecting rod
–
–
–
E-TECH
•
•
•
•
•
•
E-TECH II
–
–
–
–
X-TORQ
–
–
–
–
Fuel pump
•
•
–
–
–
•
•
•
•
•
Whisper trimmer line
•
Two-piece shaft
–
–
–
•
•
Curved shaft, superior control
•
•
–
–
Straight shaft, extended reach
–
–
–
•
•
•
•
•
•
–
–
–
–
•
•
•
Soft grips
–
Armrests
–
•
–
(•) option
158
32 3 L
32 5L x
326L
326L x
324 L x
32 3 LD
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
25.0 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.8 kW /1.1 hp
0.9 kW /1.2 hp
9000 rpm
9000 rpm
8400 rpm
8 400 rpm
7000 rpm
9000 rpm
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1.1 US pint
0.5l /1 US pint
1.8 /1.4 m/s²
1.5 /1.4 m/s²
1.7 /1.5 m/s²
1.7 /1.5 m/s²
1.9 /1.8 m/s²
1.8 /1.2 m/s²
2.8 /1.9 m/s²
2.0 /1.8 m/s²
2.7 /1.8 m/s²
2.8 /1.9 m/s²
2.2 /1.9 m/s²
3.5 /2.1 m/s²
3.9 /5.2 m/s²
2.5 /6.6 m/s²
3.9 /5.2 m/s²
3.9 /5.2 m/s²
5.8 /5.5 m/s²
2.7 /2.7 m/s²
7.2 /8.5 m/s²
4.9 /8.0 m/s²
7.2 /9.8 m/s²
7.2 /8.5 m/s²
6.1 /5.7 m/s²
7.2 /7.2 m/s²
90 dB(A) /97 dB(A)
94 dB(A) /98 dB(A)
90 dB(A) /97 dB(A)
90 dB(A) /97 dB(A)
90 dB(A) /97 dB(A)
90 dB(A) /97 dB(A)
106 dB(A)
110 dB(A)
106 dB(A)
107 dB(A)
106 dB(A)
4.1 kg /9.0 lbs
4.3 kg /9.5 lbs
4.1 kg /9.0 lbs
4.5 kg /9.9 lbs
5.1 kg /11.2 lbs
4.3 kg /9.5 lbs
•
•
•
•
•
–
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
–
–
•
•
•
•
•
–
–
–
–
–
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
(•) option
159
–
–
Power
Maximum power speed
32 5L Dx
324 L Dx
326 LDx
3 3 5L x
24.5 cm³ /1.5 cu.inch
25.0 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
34.6 cm³ /2.1 cu.inch
0.9 kW /1.2 hp
0.8 kW /1.1 hp
0.9 kW /1.2 hp
1.6 kW /2.2 hp
9000 rpm
7000 rpm
8400 rpm
8400 rpm
0.5l /1 US pint
0.5l /1.1 US pint
0.5l /1.0 US pint
0.6l /1.3 US pint
1.6 /1.4 m/s²
1.7 /1.6 m/s²
1.5 /1.2 m/s²
2.4 /1.7 m/s²
2.4 /2.2 m/s²
2.2 /1.7 m/s²
3.5 /2.2 m/s²
2.4 /1.7 m/s²
2.5 /6.6 m/s²
3.2 /4.5 m/s²
2.5 /4.7 m/s²
3.8 /4.2 m/s²
Fuel tank volume
5.8 /7.4 m/s²
5.4 /5.6 m/s²
5.8 /7.4 m/s²
5.3 /5.7 m/s²
94 dB(A) /98 dB(A)
90 dB(A) /97 dB(A)
92 dB(A) /97 dB(A)
98 dB(A) /100 dB(A)
110 dB(A)
107 dB(A)
4.5 kg /9.9 lbs
5.4 kg /11.9 lbs
4.8 kg /10.6 lbs
5.9 kg /13.0 lbs
•
•
•
•
•
•
•
•
–
–
–
E-TECH II
–
•
•
X-TORQ
–
–
–
Fuel pump
•
•
•
•
•
•
•
•
•
•
•
•
–
–
•
•
•
Curved shaft, superior control
–
–
–
–
Straight shaft, extended reach
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
•
Weight
Smart Start
Wrought connecting rod
E-TECH
Whisper trimmer line
Two-piece shaft
Soft grips
Armrests
–
(•) option
160
116 dB(A)
–
–
–
Attachments
Trimmer attachments
For detachable trimmers. Cutting equipment and guard are included.
TA850 for 323LD, 324LDx, 325LDx, 326LDx
537 35 35-01
*!3J1I8D-aiaicf!
Hedge trimmer attachment
HA 110 for 125LDx, 323LD, 324LDx, 325LDx, 326LDx
HA 850 for 125LDx, 323LD, 324LDx, 325LDx, 326LDx
537 19 66-05
537 19 66-06
*!3J1I8D-bdcfdb!
*!3J1I8D-bdcfei!
Edger attachment
EA850 for 125LDX, 323LD, 324LDx, 325LDx, 326LDx
EAC for 125LDX, 323LD, 324LDx, 325LDx, 326LDx
537 19 69-01
952 71 19-08
*!3J1I8D-ahbbca!
*!3J1I8D-bfiaed!
Sweeper attachment
SR 600 for 323LD, 324LDx, 325LDx, 326LDx
537 19 67-01
*!3J1I8D-ahbbbd!
161
Pole saw attachment
PA 1100 for 125LDx, 323LD, 324LDx, 325LDx, 326LDx, All
except USA
PA 110 for 325P5x
537 18 33-16
537 18 33-13
*!3J1I8D-ahbaja!
*!3J1I8D-aibaee!
PA 1100 for 125LDx, 323LD, 324LDx, 325LDx, 326LDx, USA
PAC for 125LDx, 323LD, 324LDx, 325LDx, 326LDx
537 18 33-17
952 71 19-10
*!3J1I8D-ahbgha!
*!3J1I8D-bfiafa!
Cultivator attachment
CA150 for 125LDx, 323LD, 324LDx, 325LDx, 326LDx
CAC for 125LDx, 323LD, 324LDx, 325LDx, 326LDx
537 42 54-01
952 71 19-07
*!3J1I8D-aidihb!
*!3J1I8D-bfiadg!
Blower attachment
Blower attachment for detachable trimmers
BAC for 125LDx, 323LD, 324LDx, 325LDx, 326LDx
952 71 19-11
*!9D1I8D-bfiacj!
Pole saw head kit
PA, No pole included, All except USA
PA, No pole included, USA
537 18 33-11
537 18 33-12
*!3J1I8D-ahbbdh!
*!3J1I8D-ahbggd!
162
Trimmer spark plugs
Trimmer sparkplugs
P17
531 00 92-28
*!3J1I8D-ahhaif!
163
Harnesses
Harness, Diagonal
Simple harness for smaller trimmers. Equipped with quick release.
537 21 62-01
*!3J1I8D-ahjdig!
Harness, Standard
Designed for lighter brush cutters. Adjustable, padded shoulder straps.
Simple and effective quick release on chest. Firm hip support.
537 21 63-01
*!3J1I8D-ahjeaj!
Harness, Duo Balance 35
A new ergonomic harness that distributes the load optimally between
shoulders, chest and back. Wide padded straps and wide back plate reduce
the load on the upper body. Equipped with a plain hip pad that has a
travelling connection so that the machine can be manoeuvred with a
minimum of body movements, further saving the user's back.
537 27 57-02
*!3J1I8D-ahjecd!
Harness, Duo Balance 55
A new ergonomic harness that distributes the load optimally between
shoulders, chest and back. Wide padded straps and wide back plate reduce
the load on the upper body. Equipped with shock absorbing hip pad that
has a travelling connection so that the machine can be manoeuvred with a
minimum of body movements, further saving the user's back.
537 27 57-01
*!3J1I8D-ahjeeh!
164
Trio-Balance
Husqvarna´s new harness distributes the load across a large area foradded
comfort. The floating pad system reduces the risk of back strain. TrioBalance is very easy to adjust for the best fit.
544 15 73-02
*!3J1I8D-bdhcie!
Tool bag for harness
Practical tool bag to be placed on your harness. Fits only the Trio-Balance
harness.
537 30 66-01
*!3J1I8D-ahjbfh!
165
Trio-Balance accessories
A line of accessories and spare parts for your Trio-Balance harness.
Harness
Hip pad
537 21 14-01
503 99 59-01
*!3J1I8D-bcfaid!
*!3J1I8D-baibjc!
Adjusting strap
Pop rivet
Hook with strap
503 99 61-01
501 60 82-01
502 02 28-03
*!3J1I8D-aiiicb!
Strap, hip pad
Rivet
Hook, assy.
537 04 95-01
537 17 54-01
502 02 28-01
*!3J1I8D-bcajde!
*!3J1I8D-afhaab!
Strap holder
Plug
Catch
537 11 35-01
537 17 53-01
502 02 30-02
*!3J2J3A-aebfcd!
*!3J1I8D-aiiief!
Support strap
Attachment point
Spring
537 15 35-01
537 04 94-01
502 02 38-01
*!3J1I8D-bcajch!
*!3J1I8D-aiiifc!
Buckle
Split pin
Hook
537 33 15-01
537 04 92-01
502 02 29-02
*!3J1I8D-bchbdb!
*!3J1I8D-bcajad!
*!3J1I8D-aiiidi!
Hip pad, assy.
Strap, support hook
Circlip
537 17 12-01
537 04 93-01
735 31 09-20
*!3J1I8D-bcdjia!
*!3J1I8D-bcajba!
Comfort, clearing harness
Intended exclusively for use as a clearing saw harness. The load is
distributed ergonomically across the body.
531 01 77-44
*!3J2J3A-abfjhf!
166
Comfort, clearing harness accessories
A line of accessories and spare parts for your "Baggen" harness.
Hook strap
Lumbar pad
Hanging strap assy.
531 00 19-24
531 00 19-08
531 00 19-17
*!3J1I8D-bbacbi!
*!3J1I8D-bbabea!
*!3J1I8D-bbacab!
Back strap
Bolt
Holding strap
531 00 19-06
531 00 19-10
531 00 19-15
*!3J1I8D-bbabfh!
Shoulder strap
Washer
Pad
531 00 19-04
531 00 19-11
502 17 15-01
*!3J1I8D-bbabdd!
*!3J1I8D-bbabge!
Clasp for shoulder strap
Nut
Clasp assy.
531 00 19-05
531 00 19-12
531 00 19-16
*!3J1I8D-bbabhb!
*!3J1I8D-bbabjf!
Strap with clasp
Spacer
Hook assy.
531 00 19-09
531 00 19-13
502 02 28-01
*!3J1I8D-bbabii!
167
*!3J1I8D-afhaab!
Heads and blades
Trimmer head T25
Semiautomatic trimmer head with Tap'n go function. The thread is fed
automatically when the head is pushed into the ground. Available in M10
for straight shaft trimmers and 3/8” for curved shaft trimmers. For 20 –55
cc machines.
3/8”
M10
531 00 92-78
531 00 92-79
*!3J1I8D-aicjec!
*!3J1I8D-aicjfj!
Trimmer head T25C
automatically when the head is pushed into the ground. For curved shaft
trimmers. For 20 –55 cc machines.
3. T25C - Semiautomatic. For curved shaft trimmers
531 00 92-61
*!3J1I8D-ahihcd!
Trimmer head T35
automatically when the head is pushed into the ground. Available in M10
and M12. For 20 –55 cc machines.
M10
M12
531 00 92-25
531 00 92-69
*!3J1I8D-ahefij!
*!3J1I8D-aiajei!
Trimmer head T35X
Semiautomatic trimmer head with Tap'n go function and ball bearing.
The thread is fed automatically when the head is pushed into the ground.
Available in M10 and M12. For 20 –55 cc machines.
M10
M12
544 90 90-01
544 90 90-02
*!3J1I8D-beidba!
*!3J1I8D-bfijee!
168
Trimmer head T35 Universal
T35 Universal is a semiautomatic trimmer head with Tap'n go function.
Includes a package with adapters that allows it to be attached to most other
machines.
537 38 81-01
*!3J1I8D-aaahig!
Trimmer head T45X
For 20 –55 cc machines.
M12
531 00 92-62
*!3J1I8D-ahihda!
Trimmer head T55X
For 20 –55 cc machines.
M12
544 90 91-01
*!3J1I8D-beidch!
Trimmer head S35
Trimmer head with manual feed. Available in M10 and M12. For 25–55 cc
machines.
M10
M12
531 00 92-24
531 00 92-68
*!3J1I8D-ahefhc!
*!3J1I8D-aiajdb!
169
Trimmy Fix
Trimmer head available in 3/8”, M10 and M12. For cord dimensions 2,43,3 mm.
3/8” (R)
M10
M12
531 00 75-34
531 00 38-69
502 13 87-02
*!3J1I8D-aiahge!
*!3J1I8D-adccic!
Trimmy S
Trimmer head available in M12. For cord dimension 2,4 mm.
M12
508 01 01-02
*!3J1I8D-aaedea!
Trimmy SII
Trimmer head available in M12. For cord dimensions 2,4-3,3 mm. For 25–
55 cc machines.
M12
502 26 08-15
*!3J1I8D-bdjhhg!
Trimmy Superauto II
Trimmer head with fully automatic line fed. Available in M12. For cord
dimensions 2,4 mm. For 25–55 cc machines.
M10
531 00 60-93
*!3J1I8D-aebagc!
170
*!3J1I8D-acfiac!
Trimmy Auto 55
Trimmer head with semi-/fully automatic line feed. Available in M12. For
cord dimensions 2,7-3,3 mm. For 25–55 cc machines.
8. Trimmy Auto 55 1", M12 Semi/fully automatic, cord 2,7-3,3
mm
531 00 92-26
*!3J1I8D-ahggfb!
Trimmer head 24C
Cpl
530 09 58-46
*!3J1I8D-aiajgc!
Tricut
For coarser grass and terrain with stones. Highly visible, replaceable plastic
flails, safe for use around trees and bushes. For 25– 65 cc machines.
1. M 10 / Ø300 mm
3. 3/8“ / Ø230 mm
531 00 38-11
537 05 94-01
*!3J1I8D-acgejg!
*!3J1I8D-aiaidc!
2. M 12 / Ø300 mm
Extra blades 255 mm
Extra blades 300 mm
531 00 38-24
531 01 77-14
531 01 77-15
*!3J1I8D-aacedi!
*!3J1I8D-adjdbb!
171
*!3J2J3A-abgaea!
Grass knives
For dense, coarse grass, but not for woody growth. Available with three or
four teeth.
1. Multi 255-3 / Ø255 mm
3. Multi 275-4 / Ø275 mm
5. Multi 300-3 / Ø300 mm
537 14 89-01
537 14 91-01
537 14 93-01
*!3J1I8D-afgfgb!
*!3J1I8D-afggai!
*!3J1I8D-afggeg!
2. Multi 255-3 (1") / Ø255 mm
4. Multi 275-4 (1") / Ø275 mm
6. Multi 300-3 (1") / Ø300 mm
537 14 90-01
537 14 92-01
537 14 94-01
*!3J1I8D-afgfif!
*!3J1I8D-afggcc!
*!3J1I8D-afggga!
Grass blades
For dense, coarse grass, but not for woody growth. Grass falls onto the
blade for neat rows. Four or eight teeth.
1. Grass 255-4 / Ø255 mm
3. Grass 255-8 / Ø250 mm
537 14 95-01
503 81 44-01
*!3J1I8D-afggie!
*!3J1I8D-acjfhc!
2. Grass 255-4 (1“) / Ø255 mm
4. Grass 255-8 (1“) / Ø250 mm
5. Grass 200-4/ Ø200 mm
537 14 96-01
537 02 19-01
952 71 55-80
*!3J1I8D-afghah!
*!3J1I8D-aebahj!
Saw blades, Scarlett
Our new range of saw blades.
1. Scarlett 200-22-1"
3. Scarlett 225-24-1"
537 27 75-01
537 27 83-01
*!3J1I8D-ahdjac!
*!3J1I8D-ahdjea!
2. Scarlett 200-22-20
4. Scarlett 225-24-20
537 27 76-01
537 27 84-01
*!3J1I8D-ahdjcg!
*!3J1I8D-ahdjge!
172
*!3J1I8D-adghgb!
Saw blades
Saw blades for trees up to 255 mm diameter. Availablein sizes from 200 and
255 mm.
1. Opti 255-22 / Ø255 mm
3. Maxi S 200-26 1" / Ø200 mm
502 26 84-01
508 90 45-01
*!3J1I8D-aaedcg!
*!3J1I8D-aebajd!
2. Maxi S 200-26 / Ø200 mm
4. Maxi XS 200-22 / Ø200 mm
5. Maxi XS 225-22 / Ø225 mm
508 90 15-01
508 90 14-01
508 90 24-01
*!3J1I8D-adghjc!
*!3J1I8D-adghif!
*!3J1I8D-adgiai!
Shredder blade kit
Only for Husqvarna 250R. For bushes with stems thinner than 20 mm
diameter.
For 250R 20 mm
Shredder blade guard for 250R 20 mm
For 343 R 1"
537 16 55-01
537 15 36-01
544 84 29-01
*!3J1I8D-agidci!
*!3J1I8D-aiaiej!
*!3J1I8D-behhii!
Shredder blade for 250R 20 mm
For 250R 1"
Shredder blade for 343R/250R 1"
537 18 06-01
544 87 11-01
544 84 28-01
*!3J1I8D-ahahch!
*!3J1I8D-behjgc!
*!3J1I8D-behgba!
Cutting equipment kits
S35 M10 kit (5310092-24 + 5037450-04)
SII kit (5022608-11 + 5039160-01)
531 00 38-48
531 00 50-94
*!3J1I8D-aiahhb!
*!3J1I8D-aiahjf!
Superauto II 1" M10 kit (5310060-93 + 5037450-04)
Grass 255-4 kit (5371495-01+ 5037440-01 + 5038901-01)
531 00 38-49
531 00 50-95
*!3J1I8D-aeichg!
*!3J1I8D-aedijj!
T35 M10 kit (5310092-25+ 5037450-04)
Maxi S-200-26 kit (5089015-01+ 5037739-01)
Hub with line retainer
531 00 50-93
531 00 50-96
530 40 10-81
*!3J1I8D-aiahii!
*!3J1I8D-aiaiab!
173
*!3J1I8D-aiaibi!
Guards
Trimmer guards
For trimmer heads and plastic grass knives.
1. Ø430 mm
5. Ø500 mm
537 18 96-01
503 91 60-01
*!3J1I8D-bceicg!
*!3J1I8D-aeidca!
2. Ø430 mm
6. Ø500 mm
9. Ø420mm 122L
537 07 67-01
503 95 43-01
502 10 47-01
*!3J1I8D-afedhg!
*!3J1I8D-bagibf!
3. Ø460 mm
7. Ø420 mm Mondo Mega, Mondo Max
503 97 71-01
530 04 98-95
*!3J1I8D-afedid!
545 03 11-01
*!3J1I8D-aeeadc!
4. Ø450 mm
8. Ø450mm Mondo
503 74 50-04
530 06 96-66
*!3J1I8D-aeicah!
537 34 94-01
*!3J2J3A-abheed!
Combi guards
For trimmer heads and grass blades.
1. Up to 255 mm
503 93 42-02
537 33 16-01
*!3J1I8D-afedef!
2. Up to 300 mm
531 00 77-01
*!3J1I8D-ahhbdj!
545 03 09-01
*!3J1I8D-afedgj!
174
Blade guards
For grass blades and grass knives.
1. Plastic, for knife and blade, max Ø275mm
3. Plastic, for knife+tricut, max Ø300mm
Ø300 mm
503 74 40-01
503 89 52-01
502 03 96-03
*!3J1I8D-aeidbd!
*!3J1I8D-afeddi!
*!3J1I8D-afbfae!
2. Plastic, for knife+tricut, max Ø300mm
4. Ø300 mm
Ø300 mm
502 26 34-01
537 28 85-01
502 26 23-01
*!3J1I8D-aeibjb!
*!3J1I8D-bcggeg!
*!3J1I8D-ajbeab!
Blade guards for saw blades
1. For grass blade/saw blade with Ø200mm
5. Ø200 mm
Ø200/225 mm
530 01 42-10
537 21 71-01
537 31 29-01
*!3J2J3A-abhcbe!
*!3J1I8D-bcfbee!
2. For saw blade with adapter, Ø200mm
6. Ø225 mm
502 27 22-01
502 03 94-06
*!3J1I8D-adibfe!
7. Ø225mm
503 77 39-01
502 03 94-03
537 31 09-02
*!3J1I8D-afedah!
4. For saw blade with adapter, Ø200mm
8. Ø255mm
537 02 21-01
502 03 95-03
*!3J1I8D-afedcb!
537 29 95-01
*!3J1I8D-aiijee!
3. Ø200 mm
*!3J2J3A-abhegh!
*!3J1I8D-bcgjcj!
537 38 77-01
*!3J1I8D-afedbe!
175
*!3J1I8D-bdeafe!
Guards, kits
1. Trimmer guard (5039543-02), protection cup, screw, nut and
holder, 343F, 345F, 345Fxt
2. Blade guard (5372885-01), protection cup, screw, nut and
holder, 343F, 345F, 345Fxt
537 29 73-01
537 29 74-01
*!3J1I8D-bcghcb!
*!3J1I8D-bcghdi!
Support cup
Prevents the blade from digging into ground. Two versions. One rotates
with the blade and the other runs on bearings for extended life.
1. M10 Fixed
3. M12 With ball bearing (20 mm/1")
503 89 01-01
502 15 70-02
*!3J2J3A-abfgbg!
*!3J1I8D-adibeh!
2. M12 Fixed (1")
M12
503 90 18-02
503 89 01-02
*!3J1I8D-adibda!
Plant protector guards
Husqvarna's plant protector guard is designed to protect young trees.
Allowsunwanted trees andvegetationto be cleared away quicklyand easily.
Used together with a saw blade, grass blade or grass knife.
1. For grass/saw blade max Ø 255 mm
2. For grass/saw blade max Ø 200 mm
502 12 26-01
502 14 55-01
*!3J1I8D-aeibie!
*!3J1I8D-aiahea!
176
J handle attachment
Converts loop handled units to blade use.
Fits 125, All except USA
Fits 323, 324, 325, 326
952 71 56-16
537 04 85-01
*!3J1I8D-bdihdb!
*!3J1I8D-afedja!
Fits 125, USA only
Fits 225, 227, 232, 240
952 71 56-15
503 78 17-03
*!3J1I8D-bdihce!
544 24 96-01
*!3J1I8D-aiahfh!
Blade holder
Blade holder with attachment for 3-4 blades. Fits on the fuel can.
1. Holder
2. Blade spanner
505 69 80-23
505 69 80-24
*!3J1I8D-abacci!
*!3J1I8D-abacdf!
177
*!3J1I8D-beadid!
Trimmer cords
Trimmer cord Whisper X
Trimmer line Whisper X has been developed using new materials and
offers the same unique characteristics of standard Whisper in respect of
noise levels. Whisper X is made of a tough inner core and an outer layer.
This production technique means materials can be combined to produce
the desired level of durability, increasing working life and making the line
less susceptible to snapping.
2.7mm/.105" 70m/233 feet Donut
3.3mm/.130" 75m/250 feet Spool
3.0mm/.120" 240m/800 feet Spool
544 96 52-01
544 96 52-03
544 96 52-05
*!3J1I8D-bffcdd!
*!3J1I8D-bffcfh!
*!3J1I8D-bffchb!
3.0mm/.120" 56m/186 feet Donut
2.7mm/.105" 240m/800 feet Spool
3.3mm/.130" 240m/800 feet Spool
544 96 52-02
544 96 52-04
544 96 52-06
*!3J1I8D-bffcea!
*!3J1I8D-bffcge!
*!3J1I8D-bffcii!
Trimmer cord, Whisper
The noise level is reduced by 50% (7-8 dBA) compared with round cords of
the same diameter. Less air resistance provides for the engine to reach its
optimal speed quicker and improves the efficiency. Its unique material is
characterised by not splitting in the ends, minimal risk for welding inside
the trimmer head due to a special surface finish and long service life with
good wear recistance. The shape of the cord counteracts breakage at the
outlet hole. Easy-to-feed. Patented design.
Ø1.5mm/.060” 15m/50ft, Blue
Ø3.0mm/.120” 10m/33ft, Red
Ø3.0mm/.120” 56m/186ft, Red
531 00 92-10
531 00 92-14
531 00 92-33
*!3J1I8D-ahahde!
*!3J1I8D-ahahhc!
*!3J1I8D-ahbicd!
Ø2.0mm/.080” 15m/50ft, Green
Ø2.0mm/.080” 130m/433ft, Green
Ø2.4mm/.095” 240m/800ft, Orange
531 00 92-11
531 00 92-30
531 00 60-86
*!3J1I8D-ahaheb!
*!3J1I8D-ahbhjd!
*!3J1I8D-adhdhj!
Ø2.4mm/.095” 15m/50ft, Orange
Ø2.4mm/.095” 90m/300ft, Orange
Ø2.7mm/.105” 240m/800ft, Yellow
531 00 92-12
531 00 92-31
531 00 75-65
*!3J1I8D-ahahfi!
*!3J1I8D-ahbiaj!
*!3J1I8D-afdade!
Ø2.7mm/.105” 12m/40ft, Yellow
Ø2.7mm/.105” 70m/233ft, Yellow
Ø3.0mm/.120” 240m/800ft, Red
531 00 92-13
531 00 92-32
531 00 60-88
*!3J1I8D-ahahgf!
*!3J1I8D-ahbibg!
178
*!3J1I8D-adhdjd!
Trimmer cord
High quality cord which suits all Husqvarna trimmer heads.
Ø1.5mm/.060" 15m/50ft, Blue
Ø2.0mm/.080" 130m/433ft, Green
531 00 92-15
531 00 92-35
*!3J1I8D-ahahij!
*!3J1I8D-ahbieh!
Ø2.0mm/.080" 15m/50ft, Green
Ø2.4mm/.095" 90m/300ft, Orange
531 00 92-16
531 00 92-36
*!3J1I8D-ahahjg!
*!3J1I8D-ahbife!
Ø2.4mm/.095" 15m/50ft, Orange
Ø2.7mm/.105" 70m/233ft, Yellow
Ø2.4mm/.095" 240m/800ft, Orange
531 00 92-17
531 00 92-37
531 00 60-52
*!3J1I8D-ahaiac!
*!3J1I8D-ahbigb!
*!3J1I8D-adgagi!
Ø2.7mm/.105" 12m/40ft, Yellow
Ø3.0mm/.120" 56m/186ft, Red
Ø2.7mm/.105" 240m/800ft, Yellow
531 00 92-18
531 00 92-38
531 00 75-68
*!3J1I8D-ahaibj!
*!3J1I8D-ahbihi!
*!3J1I8D-afdagf!
Ø3.0mm/.120" 10m/33ft, Red
Ø3.3mm/.130" 75m/250ft, White
Ø3.0mm/.120" 240m/800ft, Red
531 00 92-19
531 00 92-39
531 00 60-54
*!3J1I8D-ahaicg!
*!3J1I8D-ahbiif!
Trimmer cord
Round std., spool Ø1,5 mm/10m.
Duo trim
T300S
964 63 57-00
506 68 26-01
*!3J1I8D-aaeief!
*!3J1I8D-aaeifc!
Trimmer cord
Cutting line, 3 angular.
HVT 40
HVT 52
513 90 52-81
513 90 52-02
179
*!3J1I8D-adgaic!
Trimmer cord
Round std., 10 pcs.
6 RC
Flymo minitrim
952 71 55-54
513 84 34-87
*!3J1I8D-aaegaj!
Batteries
12 RC (95-)
513 94 01-00
180
181
182
183
Edgers
125E
Vibration idling left/right min: 3.0 m/s²/5.0 m/s². Vibration idling left/
right max: 6.0 m/s²/8.0 m/s². Vibration top speed left/right min: 7.0 m/
s²/6.0 m/s². Vibration top speed left/right max: 10.0 m/s²/9.0 m/s².
Sound level, min/max: 94 dB(A)/97 dB(A). Weight: (5.0) kg/(11.0) lbs.
Lowes 50
US50 ex Lowes, CAN
952 71 54-89
952 71 54-90
*!3J1I8D-bdfege!
· Smart Start
· E-TECH
nut
· Fuel pump
· Adjustable cutting depth
· Large support wheel
· Smart Start
· E-TECH II
nut
· Soft grips
· Armrests
· Adjustable cutting depth
· Large support wheel
*!3J1I8D-bdfehb!
326Ex
Vibration idling left/right min: 4.0 m/s²/2.0 m/s². Vibration idling left/
right max: 4.0 m/s²/2.0 m/s². Vibration top speed left/right min: 7.3 m/
s²/5.9 m/s². Vibration top speed left/right max: 7.3 m/s²/5.9 m/s².
Sound level, min/max: 96 dB(A)/96 dB(A). Weight: 5.4 kg/11.9 lbs.
CAN, US50 ex Lowes
953 26 21-01
*!3J1I8D-afcibf!
184
185
hedge trimmers.
Hedge trimming is a job where the machines must be designed so as to reduce strain on arms
and back, when trimming sides as well as tops of hedges. Apart from minimising vibrations from
the engine and the blades as they move back and forth, it’s vital that the machine is well balanced
and the centre of gravity is as close to the user as possible.
LowVib. Efficiently reduced vibrations as a result of the engine and handle
being separated with insulating dampers.
Robust cutting bars for long
product life.
The turnable rear handle also
makes it easier to cut hedge sides.
Low weight, well-balanced design and long reach save arms and back.
The centre of gravity of located
close to the body, so your job
becomes easier.
The adjustable cutting bar of the pole hedge trimmer makes it easy to cut
both sides and top.
186
The engines are durable and high
performance.
Hedge Trimmers
123HD60
Cylinder displacement: 22.5 cm³/1.4 cu.inch. Power: 0.6 kW/(0.8) hp.
Maximum power speed: 7000 rpm.
Recommended maximum twig diameter: 15 mm/0.6".
Fuel tank volume: 0.5l/1.1 US pint. Knife length: 55 cm/22".
Vibrations idling front/rear handle: 2.1 m/s²/1.6 m/s².
Vibration top speed front/rear handle: 8.2 m/s²/6.0 m/s².
Sound level, min/max: 94 dB(A)/94 dB(A).
Noise emission, L WA: 106 dB(A). Weight: 5.1 kg/11.2 lbs.
· Smart Start
· LowVib
· Comfort handles
· Fuel pump
ES,PT,South America, Central America, IT,
GR, UK
965 08 10-01
*!3J1I8D-bdgiib!
DE, FR, BE, NL, SE, NO, DK, FI
CAN+ US50
965 08 10-02
965 08 10-04
*!3J1I8D-bdgiji!
*!3J1I8D-bfgijg!
RU, HU, BG, PL, EE, LT, LV, SK, HR, CZ
AUS+NZ
965 08 10-03
965 08 10-05
*!3J1I8D-bdgjae!
*!3J1I8D-bfhjda!
123HD65x
(0.8) hp. Maximum power speed: (7000) rpm.
Recommended maximum twig diameter: (15) mm/(0.6)".
Fuel tank volume: (0.5)l/(1.1) US pint. Knife length: (60) cm/(23.6)".
Vibrations idling front/rear handle: (2.1) m/s²/(1.6) m/s².
Vibration top speed front/rear handle: (8.2) m/s²/(6.0) m/s².
Sound level, min/max: (94) dB(A)/(94) dB(A).
Noise emission, L WA: (106) dB(A). Weight: (5.3) kg/(11.5) lbs.
· Smart Start
· LowVib
· Adjustable rear handle
ES, PT, IT, GR, GB, South am
965 10 28-01
*!3J1I8D-behcah!
DE,FR,BE,NL,SE,NO,DK,FI
CAN+US50
965 10 28-02
965 10 28-04
*!3J1I8D-behcbe!
*!3J1I8D-bfgiij!
RU,HU,BG,PO,EE,LV,LT,SK,CZ,HR
AUS+NZ
965 10 28-03
965 10 28-05
*!3J1I8D-behccb!
*!3J1I8D-bfhjcd!
187
· Comfort handles
· Soft grip
· Fuel pump
323HD60
Recommended maximum twig diameter: 22 mm.
Fuel tank volume: 0.5l/1 US pint. Knife length: 60 cm/24".
· Smart Start
· LowVib
· Comfort handles
· Fuel pump
All ex US50, CAN, AUS, NZ
953 15 43-01
*!3J1I8D-aicbac!
325HD60x
· Smart Start
· E-TECH
· LowVib
· Comfort handles
· Soft grip
· Fuel pump
· Smart Start
· E-TECH
· LowVib
· Comfort handles
· Soft grip
· Fuel pump
953 15 25-02
*!3J1I8D-aiaaaj!
325HD75x
Fuel tank volume: 0.5l/1 US pint. Knife length: 73.5 cm/29".
953 15 26-02
*!3J1I8D-aiaabg!
188
326HD60x
· Smart Start
· E-TECH II
· LowVib
· Comfort handles
· Soft grip
· Fuel pump
· Smart Start
· E-TECH II
· LowVib
· Comfort handles
· Soft grip
· Fuel pump
· Smart Start
· E-TECH
· Comfort handles
· Soft grip
· Cutting attachment can be angled
· Arm rest
· Fuel pump
CAN, AUS, NZ, US50 ex Lowes –2-pack-
953 15 35-01
*!3J1I8D-aicaad!
326HD75x
Fuel tank volume: 0.5l/1 US pint. Knife length: 73.5 cm/29".
CAN, AUS, NZ, US50 ex Lowes - 2-pack-
953 15 36-01
*!3J1I8D-aicaba!
325HDA65x
Fuel tank volume: 0.5l/1 US pint. Knife length: 65 cm/25.6".
Total product length: 147 cm/57.9".
All ex US50
953 18 01-11
*!3J1I8D-befeej!
189
325HS75x
Vibration top speed front/rear handle: 4,2 m/s²/1,7 m/s².
· Smart Start
· E-TECH
· LowVib
· Comfort handles
· Fuel pump
· Smart Start
· E-TECH II
· LowVib
· Comfort handles
· Fuel pump
· Smart Start
· E-TECH
· LowVib
· Comfort handles
· Fuel pump
All ex US50
953 17 05-01
*!3J1I8D-aiaacd!
326HS75x
US50 ex Lowes -2-pack-
953 17 15-01
*!3J1I8D-aicach!
325HS99x
All ex US50
953 17 06-01
*!3J1I8D-aiaada!
190
326HS99x
· Smart Start
· E-TECH II
· LowVib
· Comfort handles
· Fuel pump
US50 ex Lowes -2-pack-
953 17 16-01
*!3J1I8D-aicade!
323HE3
· Smart Start
· Fuel pump
All ex US50, CAN
953 18 20-02
*!3J1I8D-bcjief!
325HE3x
· Smart Start
· E-TECH
· Comfort handles
· Soft grip
All ex US50
953 18 02-10
*!3J1I8D-afbgjg!
191
· Remote control for adjusting cutter
bar
· Arm rest
· Fuel pump
326HE3x
· Smart Start
· E-TECH II
· Comfort handles
· Soft grip
bar
· Arm rest
· Fuel pump
· Smart Start
· E-TECH
· Comfort handles
· Soft grip
bar
· Rear impact guard
· Arm rest
· Fuel pump
· Smart Start
· E-TECH II
· Comfort handles
· Soft grip
bar
· Rear impact guard
· Arm rest
· Fuel pump
US50 ex Lowes
953 18 12-10
*!3J1I8D-ahfdhb!
325HE4x
Total product length: 243.5 cm/95.9".
All ex US50
953 18 03-10
*!3J1I8D-ahhbjb!
326HE4x
US50 ex Lowes
953 18 14-10
*!3J1I8D-ahhcdi!
192
193
Specifications for hedge trimmers
Power
Maximum power speed
Recommended maximum twig diameter
Fuel tank volume
Knife length
Vibrations idling front/rear handle
Vibration top speed front/rear handle
1 2 3 H D 60
1 2 3 H D 65x
32 3 H D 60
3 2 5 H D 60 x
32 5 H D 75 x
22.5 cm³ /1.4 cu.inch
(22.5) cm³ /(1.4) cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
0.6 kW /(0.8) hp
(0.6) kW /(0.8) hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
9000 rpm
7000 rpm
(7000) rpm
9000 rpm
9000 rpm
15 mm /0.6"
(15) mm /(0.6)"
22 mm
22 mm
22 mm
0.5l /1.1 US pint
(0.5)l /(1.1) US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
55 cm /22"
(60) cm /(23.6)"
60 cm /24"
60 cm /24"
73.5 cm /29"
2.1 m/s² /1.6 m/s²
(2.1) m/s² /(1.6) m/s²
2.0 m/s² /2.0 m/s²
2.3 m/s² /1.5 m/s²
3.5 m/s² /2.3 m/s²
8.2 m/s² /6.0 m/s²
(8.2) m/s² /(6.0) m/s²
4.1 m/s² /5.6 m/s²
6.0 m/s² /5.5 m/s²
2.5 m/s² /3.9 m/s²
94 dB(A) /94 dB(A)
(94) dB(A) /(94) dB(A)
100 dB(A) /100 dB(A)
100 dB(A) /100 dB(A)
99 dB(A) /99 dB(A)
106 dB(A)
(106) dB(A)
109 dB(A)
109 dB(A)
109 dB(A)
5.1 kg /11.2 lbs
(5.3) kg /(11.5) lbs
5.6 kg /12.3 lbs
5.6 kg /12.3 lbs
5.9 kg /13.0 lbs
Smart Start
•
•
•
E-TECH
–
–
–
•
•
•
•
E-TECH II
–
–
–
–
–
LowVib
•
–
Comfort handles
•
Soft grip
–
•
•
•
•
•
Adjustable rear handle
•
•
•
•
•
•
•
•
Remote control for adjusting cutter bar
–
–
–
–
–
Rear impact guard
–
–
–
–
–
Cutting attachment can be angled
–
–
–
–
–
Arm rest
–
–
–
–
–
Fuel pump
•
•
•
•
•
Weight
Total product length
(•) option
194
–
•
–
326H D 60 x
326 HD 75 x
325 HDA 65x
32 5 H S75 x
326H S 75x
32 5 H S99 x
326H S99 x
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
8400 rpm
8400 rpm
9000 rpm
9000 rpm
9000 rpm
9000 rpm
9000 rpm
22 mm
22 mm
20 mm
10 mm
10 mm
10 mm
10 mm
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
60 cm /24"
73.5 cm /29"
65 cm /25.6"
72 cm /28"
72 cm /28.4"
100 cm /39"
100 cm /39.4"
2.8 m/s² /2.8 m/s²
3.7 m/s² /3.7 m/s²
3.5 m/s² /3.1 m/s²
2.9 m/s² /2.0 m/s²
3.3 m/s² /3.6 m/s²
2.5 m/s² /2.2 m/s²
3.3 m/s² /3.6 m/s²
5.7 m/s² /6.4 m/s²
4.9 m/s² /4.5 m/s²
1.8 m/s² /5.7 m/s²
4,2 m/s² /1,7 m/s²
6.2 m/s² /7.1 m/s²
4,0 m/s² /2,4 m/s²
6.2 m/s² /7.1 m/s²
98 dB(A) /98 dB(A)
98 dB(A) /98 dB(A)
92 dB(A) /92 dB(A)
96 dB(A) /96 dB(A)
96 dB(A) /96 dB(A)
96 dB(A) /96 dB(A)
97 dB(A) /97 dB(A)
105 dB(A)
109 dB(A)
5.5 kg /12.1 lbs
5.5 kg /12.1 lbs
5.6 kg /12.3 lbs
5.8 kg /12.8 lbs
5.9 kg /13.0 lbs
•
•
•
•
•
•
•
•
–
–
–
–
5.7 kg /12.6 lbs
6.0 kg /13.2 lbs
109 dB(A)
147 cm /57.9"
•
•
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
–
•
•
•
•
(•) option
195
–
–
Power
Maximum power speed
Recommended maximum twig diameter
Fuel tank volume
Knife length
Vibrations idling front/rear handle
Vibration top speed front/rear handle
32 3 HE 3
32 5H E 3x
326 HE 3 x
32 5H E4 x
326 HE 4 x
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
24.5 cm³ /1.5 cu.inch
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
0.9 kW /1.2 hp
9000 rpm
9000 rpm
9000 rpm
9000 rpm
9000 rpm
20 mm
20 mm
20 mm
20 mm
20 mm
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
0.5l /1 US pint
55 cm /22"
55 cm /22"
55 cm /21.7"
55 cm /22"
55 cm /21.7"
1.4 m/s² /3.8 m/s²
1.4 m/s² /3.8 m/s²
1.9 m/s² /3.4 m/s²
1.8 m/s² /2.2 m/s²
2.2 m/s² /2.6 m/s²
5,5 m/s² /4,7 m/s²
5,5 m/s² /4,7 m/s²
6.7 m/s² /4.6 m/s²
4,8 m/s² /5,9 m/s²
4.9 m/s² /6.0 m/s²
93 dB(A) /93 dB(A)
93 dB(A) /93 dB(A)
92 dB(A) /92 dB(A)
91 dB(A) /91 dB(A)
88 dB(A) /88 dB(A)
105 dB(A)
105 dB(A)
107 dB(A)
105 dB(A)
106 dB(A)
Weight
5.7 kg /12.6 lbs
5.7 kg /12.6 lbs
6.0 kg /13.2 lbs
5.8 kg /12.6 lbs
6.1 kg /13.4 lbs
Total product length
174 cm /68.5"
174 cm /68.5"
171 cm /67.3"
243.5 cm /95.9"
234 cm /67.3"
Smart Start
•
•
•
•
–
•
•
•
E-TECH
–
–
E-TECH II
–
–
•
–
•
LowVib
–
–
–
–
–
Adjustable rear handle
–
–
–
–
–
Comfort handles
–
Soft grip
–
Remote control for adjusting cutter bar
–
•
•
•
•
•
•
Rear impact guard
–
–
–
Cutting attachment can be angled
•
Arm rest
–
Fuel pump
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(•) option
196
Hedgetrimmer, Pruner, Edger
and Ice Auger accessories
Collector
325HS75x/325HS99x/326HS75
537 06 43-01
*!3J1I8D-aichjj!
Blade
upper
lower
531 00 47-10
531 00 47-13
Blade
325Ex, 326Ex
503 84 82-02
*!3J1I8D-aicjci!
Pruner attachment
Knife-type, swivel top
Cut 42 mm, 1,9-2,0 m, 2,3 kg
Cut 42 mm, 2,5-4,0 m, 3,2 kg
953 03 12-02
953 03 14-02
197
Knife
For 953 03 12-02 & 953 03 14-02
503 74 60-01
Knife guard
For 953 03 12-02 & 953 03 14-02
503 74 63-01
Pruner attachment
Shears-type, swivel top
Cut 40 mm, 1,9-2,0 m, 2,4 kg
Cut 40 mm, 2,5-4,0 m, 3,3 kg
953 03 12-01
953 03 14-01
Shears
For 953 03 12-01 & 953 03 14-01
503 76 00-01
Counterhold
For 953 03 12-01 & 953 03 14-01
503 76 02-01
Adapter
250PS adapter for 953 03 12-01/02 & 953 03 14-01/02
503 78 10-01
198
Ice auger accessories
Drillbit, 130 mm
Cutter kit Lazer, 130 mm
531 00 75-01
531 00 75-05
*!3J1I8D-aeafbf!
*!3J1I8D-aeaffd!
Drillbit, 150 mm
531 00 75-02
531 00 75-06
*!3J1I8D-aeafcc!
*!3J1I8D-aeafga!
Drillbit, 200 mm
Cutterprotection, 150mm
531 00 75-03
531 00 75-07
537 03 55-01
*!3J1I8D-aeafdj!
*!3J1I8D-aeafhh!
*!3J1I8D-aiceif!
Drillbit, 250 mm
531 00 75-04
531 00 75-08
537 03 56-01
*!3J1I8D-aeafeg!
*!3J1I8D-aeafie!
*!3J1I8D-aicejc!
Extender, 275 mm
531 00 75-09
537 03 54-01
537 03 57-01
*!3J1I8D-aeafjb!
*!3J1I8D-aicehi!
199
*!3J1I8D-aicfai!
Blowers
130BT
(1.1) hp. Air speed: (65) m/s/(145) mph. Air flow in housing: (12.2) m³/
min. Air flow in pipe: (10.2) m³/min.
Sound level at 15 m (ANSI 175.2): (69) dB(A). Weight: (6.7) kg/
(14.8) lbs.
· X-TORQ
· E-TECH II
· Comfort front handle
· Adjustable handle
· Soft grip
· Throttle lock out
· Ergonomic harness
· Fuel pump
· X-TORQ
· E-TECH II
· Soft grip
· Fuel pump
· X-TORQ
· E-TECH II
· Soft grip
· Fuel pump
Lowes 50
965 10 22-03
*!3J1I8D-behbai!
CAN, US 50 ex Lowes
All ex US 50, CAN
965 10 22-02
965 10 22-01
*!3J1I8D-behaeh!
*!3J1I8D-behaif!
150BT
(2.5) hp. Air speed: (80) m/s/(179) mph. Air flow in pipe: (13.5) m³/min.
Weight: (10.2) kg/(22.5) lbs.
Lowes 50
965 10 23-03
*!3J1I8D-behbeg!
CAN, US50 ex Lowes
All ex US50, CAN
965 10 23-02
965 10 23-01
*!3J1I8D-behbdj!
*!3J1I8D-behbcc!
150BF
(2.5) hp. Air speed: (80) m/s/(179) mph. Air flow in pipe: (13.5) m³/min.
Weight: (10.2) kg/(22.5) lbs.
US50
965 10 24-01
*!3J1I8D-behbbf!
200
356BTx
Air speed: 79 m/s/177 mph. Air flow in housing: 21.7 m³/min.
Air flow in pipe: 13.4 m³/min. Fuel tank volume: 1.5l/3.2 US pint.
Emission HC: 47 g/kWh. Emission Nox: 1.7 g/kWh.
Emission CO: 144 g/kWh. Vibrations idling right handle min/
max: 1.3 m/s²/1.3 m/s². Vibrations top speed right handle min/
max: 4.2 m/s²/4.2 m/s². Sound level, min/max: 88 dB(A)/88 dB(A).
Sound level at 15 m (ANSI 175.2): 64 dB(A).
All ex US50
US50 ex Lowes
953 21 01-02
953 21 01-01
*!3J1I8D-bdihig!
· E-TECH II
· Low noise
· Air Injection
· LowVib
· Soft grip
· Well covered without projecting
parts
· Fuel pump
· E-TECH II
· Low noise
· Air Injection
· LowVib
· Soft grip
· Well covered without projecting
parts
· Fuel pump
*!3J1I8D-aicbdd!
356BFx
Air speed: 79 m/s/177 mph. Air flow in housing: 21.7 m³/min.
Emission HC: 47 g/kWh. Emission Nox: 1.7 g/kWh.
Emission CO: 144 g/kWh. Vibrations idling right handle min/
max: 1.7 m/s²/1.7 m/s². Vibrations top speed right handle min/
max: 4.3 m/s²/4.3 m/s². Sound level, min/max: 90 dB(A)/90 dB(A).
US50 ex Lowes
953 21 06-01
*!3J1I8D-aicbea!
201
170BT
Air speed: 88.4 m/s/199 mph. Air flow in housing: 21.0 m³/min.
Emission HC + NOx: 72 g/kWh. Emission CO: 536 g/kWh.
Vibrations idling right handle min/max: 0.8 m/s²/0.8 m/s².
Vibrations top speed right handle min/max: 3.9 m/s²/3.9 m/s².
All ex US50, CAN
US50, CAN
965 08 19-01
965 08 19-02
*!3J1I8D-bdibhf!
· X-TORQ
· E-TECH II
· Commecial grade air filter
· Soft grip
· Fuel pump
· X-TORQ
· E-TECH II
· Commecial grade air filter
· Soft grip
· Fuel pump
*!3J1I8D-bdibic!
170BF
Air speed: 88.4 m/s/199 mph. Air flow in housing: 21.0 m³/min.
Emission HC + NOx: 72 g/kWh. Emission CO: 536 g/kWh.
Vibrations idling right handle min/max: 0.8 m/s²/0.8 m/s².
Vibrations top speed right handle min/max: 3.9 m/s²/3.9 m/s².
US50
965 08 20-01
*!3J1I8D-bdibjj!
202
203
Specifications for blowers
1 30 BT
1 50 BT
1 50 B F
(29.5) cm³ /(1.8) cu.inch
(50.2) cm³ /(3.1) cu.inch
(50.2) cm³ /(3.1) cu.inch
Power
(0.85) kW /(1.1) hp
(1.9) kW /(2.5) hp
(1.9) kW /(2.5) hp
Air speed
(65) m/s /(145) mph
(80) m/s /(179) mph
(80) m/s /(179) mph
(13.5) m³/min
(13.5) m³/min
(6.7) kg /(14.8) lbs
(10.2) kg /(22.5) lbs
(10.2) kg /(22.5) lbs
•
•
•
•
•
•
Low noise
–
–
–
Air Injection
–
–
–
Commecial grade air filter
–
–
–
LowVib
–
–
–
Comfort front handle
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
Well covered without projecting parts
–
–
–
Fuel pump
•
•
•
Air flow in housing
(12.2) m³/min
Air flow in pipe
(10.2) m³/min
Fuel tank volume
Emission HC + NOx
Emission HC
Emission Nox
Emission CO
Vibrations idling right handle min/max
Vibrations top speed right handle min/max
Sound level at 15 m (ANSI 175.2)
(69) dB(A)
Weight
X-TORQ
E-TECH II
Adjustable handle
Soft grip
Throttle lock out
Ergonomic harness
(•) option
204
–
•
3 56 BT x
3 56 B F x
1 70 BT
1 70 B F
51.7 cm³ /3.2 cu.inch
51.7 cm³ /3.2 cu.inch
64.9 cm³ /4.0 cu.inch
64.9 cm³ /4.0 cu.inch
2.4 kW /3.2 hp
2.4 kW /3.2 hp
2.6 kW /3.5 hp
2.6 kW /3.5 hp
79 m/s /177 mph
79 m/s /177 mph
88.4 m/s /199 mph
88.4 m/s /199 mph
21.7 m³/min
21.7 m³/min
21.0 m³/min
21.0 m³/min
13.4 m³/min
13.4 m³/min
16.0 m³/min
16.0 m³/min
1.5l /3.2 US pint
1.5l /3.2 US pint
1.8l /3.8 US pint
1.8l /3.8 US pint
72 g/kWh
72 g/kWh
47 g/kWh
47 g/kWh
1.7 g/kWh
1.7 g/kWh
144 g/kWh
144 g/kWh
536 g/kWh
536 g/kWh
1.3 m/s² /1.3 m/s²
1.7 m/s² /1.7 m/s²
0.8 m/s² /0.8 m/s²
0.8 m/s² /0.8 m/s²
4.2 m/s² /4.2 m/s²
4.3 m/s² /4.3 m/s²
3.9 m/s² /3.9 m/s²
3.9 m/s² /3.9 m/s²
88 dB(A) /88 dB(A)
90 dB(A) /90 dB(A)
95 dB(A) /95 dB(A)
95 dB(A) /95 dB(A)
64 dB(A)
64 dB(A)
76 dB(A)
76 dB(A)
100 dB(A)
100 dB(A)
110 dB(A)
110 dB(A)
10.2 kg /22.5 lbs
10.2 kg /22.5 lbs
12.0 kg /26.5 lbs
12.0 kg /26.5 lbs
–
–
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
•
•
•
•
•
•
•
–
–
•
•
–
•
•
•
•
(•) option
205
–
•
–
•
•
Blower accessories
Nozzles
Flat, 141B/155B/145BT/145BF/155BT/
155BF
Jet Blow, 225B, 225Bx
531 00 44-84
530 06 99-61
*!3J1I8D-aicjae!
Harness
Cpl, 141B, 235P, BP2052
503 73 86-01
*!3J1I8D-aicjbb!
206
207
Technical solutions
for Riders.
Lawn care, whether done by professionals or amateurs, on large areas or narrow passages, requires
high cutting performance as well as high manoeuvrability. With a front-mounted cutting deck
and our patented articulated steering, the driver has full view of what he/she is cutting and has
no difficulty cutting around obstructions like bushes and trees.
Husqvarna’s patented articulated steering makes the Rider exceptionally
handy to manoeuvre and minimises the need for further trimming afterwards.
With the steering wheel fully turned, the uncut circle is no more than
20–40 cm, depending on the model.
The front-mounted cutting deck gives you excellent view of the cutting and
excellent access into corners, under bushes and in other difficult places.
All models are built on heavy-duty,
powder-coated chassis, of 3 mm
steel plate.
Folding engine cover for easy
service in the well-planned engine
compartment.
The top-of-the-line model of the consumer machines, the Rider 15-V2,
and the models for professional use are equipped with high-spec OHV
engines from Kawasaki.
The hydrostatic transmission works
like a stepless automatic gear with
separate pedals for front and back.
Power steering makes manoeuvring
the machine even easier and more
precise.
Without tools, you can quickly tilt the cutting deck into service position,
for easy cleaning and service.
208
Well-grouped, easy-access controls, central cutting height adjustment
and comfortable seat and hydraulic equipment lift make operation easier
and ensure a pleasant driver environment.
The professional Rider models have double 20W halogen lights which make
you more visible and allow you to work after dark.
The Combi cutting deck has overlapping, unsynchronised blades.The rear ejection
function is suitable for somewhat uneven surfaces that are not mowed frequently.
On often-cut areas the BioClip function gives the best results. A removable metal
plug makes it quick and easy to switch cutting methods.
The hydraulic equipment lift controls front-mounted equipment
with high precision.
The transparent tank on our ProFlex models takes 17 litres and allows long
periods of operation without interruption.
The catalytic converter reduces hydrocarbons and carbon dioxide by up to
50 and 25% respectively. Standard on our professional Riders and optional
accessory on other models.
The quick connection makes it
easy to change accessories and
cutting decks.
All pro models are equipped with
load holders for personal effects.
The control panel has a switched
12V outlet and a switch
for the lighting.
The ProFlex models have large capacity and a wide range of accessories makes
them into flexible equipment carriers for year-round use. Many of the other
models can also be fitted with a brush, snow blade, harrow, spreader and trailer,
for example.
209
Riders
Rider 11
Engine producer: Briggs & Stratton. Engine type: OHV AVS.
Engine name: I/C. Power: 7.7 kW/10.5 hp. Electric starter: Yes.
Generator: 3A. Battery capacity: 24 Ah.
Fuel tank volume: 7l/14.8 US pint. Transmission: Peerless MST 205.
Tyre size front/rear: 165/60-8/165/60-8. Wheelbase: 82 cm/32.3".
Cutting width: 85 cm/34". Cutting height: 40-90 mm/1.6-3.5". Blades: 3.
Noise level / at rpm: <100 dB(A)/3100 rpm. Width: 95 cm/38".
Height: 106 cm/41.7". Length: 205 cm/80.7". Weight: 224 kg/497 lbs.
· Patented articulated steering
· Low emission engine w. anti-vib
system
· OverHead Valve technology
· Manual transmission, 5+1
· Cutting deck, Rear discharge 85
· Well-grouped controls
· Electric start
· Central cutting height adjustment
· Standard seat
· Steering column and support
wheels with ball bearings
· Pivoting rear axle
· 16" wheels
· Trelleborg High Grip tyres, H
pattern
· Catalytic converter (option)
system
· Manual transmission, 5+1
· Service position for cutting deck
· Cutting deck; Combi 94
· Electric start
· Standard seat
· 16" wheels
pattern
Rider 11
953 51 94-01
*!3J1I8D-ahjgdi!
Rider 11 C
Fuel tank volume: 10l/21.1 US pint. Transmission: Peerless MST 205.
Noise level / at rpm: <100 dB(A)/3100 rpm. Width: 100 cm/39.4".
Rider 11 C
965 09 42-01
*!3J1I8D-behhge!
210
Rider 13 C
Fuel tank volume: 10l/21.1 US pint. Transmission: Tuff Torq K46.
system
· Hydrostatic transmission, K46
· Electric start
· Standard seat
· Ball bearings on front wheels,
steering column and support
wheels
· 16" wheels
pattern
· All-Wheel-Drive
system
· Hydrostatic transmission w.
internal pump and two hydraulic
engines, K574
· Electric start
· Standard seat
wheels
· 16" wheels
pattern
Rider 13 C
965 09 43-01
*!3J1I8D-behhfh!
Rider 13 AWD
Fuel tank volume: 10l/21.1 US pint. Transmission: Kanzaki K574.
Rider 13 AWD
965 09 46-01
*!3J1I8D-behhcg!
211
Rider 15 C
system
· Electric start
· Standard seat
wheels
· 16" wheels
pattern
· Pressure-lubricated 1-cyl. engine
· Options for cutting decks
· Floating cutting deck
· Cutting deck; Combi 112 (option)
· Height-adjustable steering wheel
· Electric start
· Standard seat
wheels
· 16" wheels
pattern
· Roll bar around the engine cover
Rider 15 C
965 09 44-01
*!3J1I8D-behhea!
Rider 175
Engine producer: Briggs & Stratton. Engine type: OHV.
Engine name: Protection Package. Power: 12.9 kW/17.5 hp.
Electric starter: Yes. Generator: 15A. Battery capacity: 24 Ah.
Cutting width: 103-112 cm/41-44". Cutting height: 40-90 mm/1.6-3.5".
Blades: 3. Noise level / at rpm: <100 dB(A)/3000 rpm.
Width: 89 cm/35.0". Height: 107 cm/42.1". Length: 215 cm/84.6".
Weight (base machine): 227 kg/504 lbs.
Rider 175
965 10 49-01
*!3J1I8D-behffj!
212
Rider 175 AWD
Engine producer: Briggs & Stratton. Engine type: OHV.
Engine name: Protection Package. Power: 12.9 kW/17.5 hp.
Electric starter: Yes. Generator: 15A. Battery capacity: 24 Ah.
· All-Wheel-Drive
· Separate oil filter
· Electric start
· Standard seat
· 16" wheels
pattern
· Electric start
· Comfort seat
wheels
· 16" wheels
pattern
Rider 175 AWD
965 10 50-01
*!3J1I8D-behfgg!
Rider 15V2
Engine producer: Kawasaki. Engine type: V-Twin OHV.
Engine name: FH430V. Power: 11.0 kW/15 hp. Electric starter: Yes.
Rider 15V2
965 09 45-01
*!3J1I8D-behhdd!
213
Rider 15V2 AWD
· All-Wheel-Drive
internal pump and two hydraulic
engines, K574
· Electric start
· Comfort seat
wheels
· 16" wheels
pattern
· Power steering
· Hydrostatic transmission w. feeder
pump, K66
· Cutting deck; Combi 112 XP
(option)
(option)
(option)
· Front headlights
· Transparent tank, 14 litres
· Electric start
· 12V outlet
· Timer
· Premium seat
· Load holder
wheels
· 16" wheels
pattern
· Roll bar around engine cover and
silencer
· Catalytic converter
Rider 15V2 AWD
965 09 47-01
*!3J1I8D-behhbj!
PR 18
Width: 90 cm/36". Height: 113 cm/44.5". Length: 203 cm/80".
PR 18
953 52 19-01
*!3J1I8D-ahjgid!
214
PR 18 AWD
Fuel tank volume: 14l/29.6 US pint. Transmission: Kanzaki KTM10.
Width: 90 cm/36". Height: 113 cm/44.5". Length: 203 cm/80".
· All-Wheel-Drive
· Power steering
external pump and two hydraulic
engines, KTM10
(option)
(option)
(option)
· Front headlights
· Electric start
· 12V outlet
· Timer
· Premium seat
· Load holder
wheels
· 16" wheels
pattern
silencer
· ProFlex chassis
· Power steering
· Hydrostatic transmission w. feeder
pump, K66
· Quick connection
· Hydraulic equipment lift
(option)
(option)
· Differential lock
· Front headlights
· Electric start
· 12V outlet
· Timer
· Premium seat w. armrests
· Load holder
wheels
· 18" wheels
pattern
silencer
PR 18 AWD
953 53 66-01
*!3J1I8D-aidghd!
PF 21
Fuel tank volume: 17l/36 US pint. Transmission: Tuff Torq K66.
Width: 90 cm/36". Height: 116 cm/45.6". Length: 208 cm/81.9".
PF 21
965 09 70-01
*!3J1I8D-befbci!
215
PF 21 AWD
Fuel tank volume: 17l/36 US pint. Transmission: Kanzaki KTM10.
Width: 90 cm/36". Height: 116 cm/45.6". Length: 208 cm/81.9".
PF 21 AWD
953 53 65-01
*!3J1I8D-aidggg!
216
· ProFlex chassis
· All-Wheel-Drive
· Power steering
external pump and two hydraulic
engines, KTM10
· Quick connection
· Hydraulic equipment lift
(option)
(option)
· Front headlights
· Electric start
· 12V outlet
· Timer
· Premium seat w. armrests
· Load holder
wheels
· 18" wheels
pattern
silencer
217
Specifications for Riders
Engine producer
Engine type
Engine name
Power
Electric starter
Generator
Battery capacity
Fuel tank volume
Transmission
Tyre size front/rear
Wheelbase
Cutting width
Cutting height
Blades
Noise level / at rpm
Width
Height
Length
Weight
Weight (base machine)
Patented articulated steering
ProFlex chassis
Pressure-lubricated 1-cyl. engine
All-Wheel-Drive
Separate oil filter
Low emission engine w. anti-vib system
OverHead Valve technology
Power steering
Hydrostatic transmission w. external pump and two hydraulic engines, KTM10
Hydrostatic transmission w. feeder pump, K66
Hydrostatic transmission w. internal pump and two hydraulic engines, K574
Hydrostatic transmission, K46
Manual transmission, 5+1
Quick connection
Hydraulic equipment lift
Options for cutting decks
Service position for cutting deck
Floating cutting deck
Cutting deck; Combi 122 XP
Cutting deck; Combi 112
Cutting deck, Rear discharge 85
Differential lock
Front headlights
Height-adjustable steering wheel
Transparent tank, 17 litres
Well-grouped controls
Electric start
Central cutting height adjustment
12Voutlet
Timer
Premium seat w. armrests
Premium seat
Comfort seat
Standard seat
Load holder
Ball bearings on front wheels, steering column and support wheels
Steering column and support wheels with ball bearings
Pivoting rear axle
18" wheels
16" wheels
Trelleborg High Grip tyres, H pattern
Roll bar around engine cover and silencer
Roll bar around the engine cover
Catalytic converter
Rid er 1 1
R ider 1 1 C
Briggs & Stratton
OHV AVS
I/C
7.7 kW /10.5 hp
Yes
3A
24 Ah
7l /14.8 US pint
Peerless MST 205
165/60-8 /165/60-8
82 cm /32.3"
85 cm /34"
40-90 mm /1.6-3.5"
3
<100 dB(A) /3100 rpm
95 cm /38"
106 cm /41.7"
205 cm /80.7"
224 kg /497 lbs
Briggs & Stratton
OHV AVS
I/C
7.7 kW /10.5 hp
Yes
3A
24 Ah
10l /21.1 US pint
Peerless MST 205
165/60-8 /165/60-8
89 cm /35.0"
94 cm /37"
30-80 mm /1.2-3.1"
3
<100 dB(A) /3100 rpm
100 cm /39.4"
107 cm /42.1"
223 cm /87.8"
225 kg /500 lbs
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
•
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
(• )
(• )
–
–
–
–
–
218
–
–
–
–
–
•
•
•
–
–
–
–
–
(•) option
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Ri d er 1 3 C
R i de r 1 3 AW D
R i der 1 5 C
R i der 1 75
R i de r 1 75 AW D
Briggs & Stratton
OHV AVS
I/C
9.2 kW /12.5 hp
Yes
3A
24 Ah
10l /21.1 US pint
Tuff Torq K46
165/60-8 /165/60-8
89 cm /35.0"
94 cm /37"
30-80 mm /1.2-3.1"
3
<100 dB(A) /3100 rpm
100 cm /39.4"
107 cm /42.1"
223 cm /87.8"
228 kg /506 lbs
Briggs & Stratton
OHV AVS
I/C
9.2 kW /12.5 hp
Yes
3A
24 Ah
10l /21.1 US pint
Kanzaki K574
165/60-8 /165/60-8
89 cm /35.0"
94 cm /37"
30-80 mm /1.2-3.1"
3
<100 dB(A) /3100 rpm
100 cm /39.4"
107 cm /42.1"
223 cm /87.8"
251 kg /557 lbs
Briggs & Stratton
OHV AVS
I/C
11.4 kW /15.5 hp
Yes
3A
24 Ah
10l /21.1 US pint
Tuff Torq K46
165/60-8 /165/60-8
89 cm /35.0"
94 cm /37"
30-80 mm /1.2-3.1"
3
<100 dB(A) /3100 rpm
100 cm /39.4"
107 cm /42.1"
223 cm /87.8"
232 kg /515 lbs
Briggs & Stratton
OHV
Protection Package
12.9 kW /17.5 hp
Yes
15A
24 Ah
10l /21.1 US pint
Tuff Torq K46
165/60-8 /165/60-8
89 cm /35.0"
103-112 cm /41-44"
40-90 mm /1.6-3.5"
3
<100 dB(A) /3000 rpm
89 cm /35.0"
107 cm /42.1"
215 cm /84.6"
Briggs & Stratton
OHV
Protection Package
12.9 kW /17.5 hp
Yes
15A
24 Ah
10l /21.1 US pint
Kanzaki K574
165/60-8 /165/60-8
89 cm /35.0"
103-112 cm /41-44"
40-90 mm /1.6-3.5"
3
<100 dB(A) /3000 rpm
89 cm /35.0"
107 cm /42.1"
215 cm /84.6"
•
•
•
227 kg /504 lbs
248 kg /550 lbs
–
–
–
–
–
•
•
–
–
–
–
•
–
–
–
–
•
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
•
–
•
•
–
–
–
•
–
–
–
–
–
•
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
•
–
•
–
–
–
–
•
–
•
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(• )
(• )
–
–
–
–
(• )
(• )
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(• )
•
(• )
•
(• )
–
–
–
–
–
–
–
–
–
–
(• )
–
–
–
–
–
–
–
–
–
–
(• )
–
–
–
–
–
–
–
–
–
–
(•) option
219
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Engine producer
Engine type
Engine name
Power
Electric starter
Generator
Battery capacity
Fuel tank volume
Transmission
Tyre size front/rear
Wheelbase
Cutting width
Cutting height
Blades
Noise level / at rpm
Width
Height
Length
Weight
Weight (base machine)
Patented articulated steering
ProFlex chassis
All-Wheel-Drive
Separate oil filter
Low emission engine w. anti-vib system
OverHead Valve technology
Power steering
Hydrostatic transmission w. external pump and two hydraulic engines, KTM10
Hydrostatic transmission w. feeder pump, K66
Hydrostatic transmission w. internal pump and two hydraulic engines, K574
Hydrostatic transmission, K46
Manual transmission, 5+1
Quick connection
Hydraulic equipment lift
Options for cutting decks
Service position for cutting deck
Floating cutting deck
Cutting deck, Rear discharge 85
Differential lock
Front headlights
Height-adjustable steering wheel
Well-grouped controls
Electric start
12Voutlet
Timer
Premium seat w. armrests
Premium seat
Comfort seat
Standard seat
Load holder
Ball bearings on front wheels, steering column and support wheels
Steering column and support wheels with ball bearings
Pivoting rear axle
18" wheels
16" wheels
Trelleborg High Grip tyres, H pattern
Roll bar around engine cover and silencer
Roll bar around the engine cover
Catalytic converter
R i der 1 5V 2
Ri de r 1 5V 2 AW D
Kawasaki
V-Twin OHV
FH430V
11.0 kW /15 hp
Yes
13A
24 Ah
10l /21.1 US pint
Tuff Torq K46
165/60-8 /165/60-8
89 cm /35.0"
103-112 cm /41-44"
40-90 mm /1.6-3.5"
3
<100 dB(A) /3000 rpm
89 cm /35.0"
115 cm /45.3"
215 cm /84.6"
Kawasaki
V-Twin OHV
FH430V
11.0 kW /15 hp
Yes
13A
24 Ah
10l /21.1 US pint
Kanzaki K574
165/60-8 /165/60-8
89 cm /35.0"
103-112 cm /41-44"
40-90 mm /1.6-3.5"
3
<100 dB(A) /3000 rpm
89 cm /35.0"
115 cm /45.3"
215 cm /84.6"
231 kg /513 lbs
252 kg /559 lbs
–
–
–
–
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
–
–
–
–
–
–
•
–
–
–
–
•
•
•
(• )
(• )
–
–
–
–
–
–
–
(• )
(• )
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(• )
•
(• )
–
–
–
–
–
220
–
•
•
•
–
–
–
–
(•) option
•
–
–
–
–
–
PR 18
P R 1 8 AW D
PF 21
P F 21 AWD
Kawasaki
V-Twin OHV
FH531V
13.2 kW /18 hp
Yes
13A
24 Ah
14l /29.6 US pint
Tuff Torq K66
165/60-8 /165/60-8
87 cm /34.3"
94-112 cm /37-44"
40-90 mm /1.6-3.5"
3
<100 dB(A) /3000 rpm
90 cm /36"
113 cm /44.5"
203 cm /80"
Kawasaki
V-Twin OHV
FH531V
13.2 kW /18 hp
Yes
13A
24 Ah
14l /29.6 US pint
Kanzaki KTM10
165/60-8 /165/60-8
87 cm /34.3"
94-112 cm /37-44"
40-90 mm /1.6-3.5"
3
<100 dB(A) /3000 rpm
90 cm /36"
113 cm /44.5"
203 cm /80"
Kawasaki
V-Twin OHV
FH641V
15.4 kW /21 hp
Yes
13A
24 Ah
17l /36 US pint
Tuff Torq K66
195/65-8 /195/65-8
100 cm /39.4"
112-122 cm /44-48"
40-100 mm /1.6-3.9"
3
<102 dB(A) /3000 rpm
90 cm /36"
116 cm /45.6"
208 cm /81.9"
Kawasaki
V-Twin OHV
FH641V
15.4 kW /21 hp
Yes
13A
24 Ah
17l /36 US pint
Kanzaki KTM10
195/65-8 /195/65-8
100 cm /39.4"
112-122 cm /44-48"
40-100 mm /1.6-3.9"
3
<102 dB(A) /3000 rpm
90 cm /36"
116 cm /45.6"
208 cm /81.9"
285 kg /632 lbs
296 kg /657 lbs
311 kg /690 lbs
330 kg /733 lbs
–
–
–
–
–
•
•
–
•
–
•
•
–
•
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
–
•
–
–
–
•
–
–
–
–
–
–
–
–
–
•
•
•
–
(• )
(• )
(• )
–
–
–
–
–
–
(• )
(• )
(• )
–
–
–
–
–
–
–
•
•
•
•
–
•
•
•
–
•
•
•
–
–
–
–
•
•
•
•
•
(• )
(• )
•
•
•
•
•
(• )
(• )
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
(•) option
221
–
–
–
–
–
–
–
Technical solutions
for tractors.
A ride-on mower for lawn care, where the lawns aren’t mowed often or regularly, or where the
grass type varies greatly, needs a flexible cutting capacity. Areas that are cut often can use BioClip,
while seldom-cut areas or those with coarser grass varieties require higher capacity of discharge
or collection. Our tractors can be operated with all three cutting systems, but they’re also excellent
equipment carriers.
All our tractors are built on a heavy, 2.9 mm thick, torsion-resistant frame.
Heavy, cast front axle provides better
balance and stability.
Hydrostatic transmission, an oilcontrolled transmission that works
like a stepless automatic gearbox.
BioClip means that the grass is cut into small pieces, which quickly decompose
and become fertiliser.You don’t have to rake and pick up the cuttings, and you
get a more attractive lawn.
TrioClip lets you choose between collection, discharge and BioClip, by means
of different accessories.
The tractor range includes both side-discharge models and rear-discharge
models with integrated collection.
222
Air Induction means that an airstream is created underneath the cutting deck,
lifting up the grass before it is cut.This gives better results and more efficient
collection.
All tractors are equipped with powerful, full pressure-lubricated OHV engines
from Kawasaki or Kohler.The Kawasaki engines are two cylinder, while the
Kohlers are single cylinder.
“Step through” makes it easy to get on and off our LT/YT models.
Pivoting front axle for comfortable operation even on sloping terrain.
High-comfort seating, with all the controls ergonomically located at the side,
makes our tractors uniquely comfortable.
Wide tyres reduce the pressure on the ground and ensure good traction.
In a few easy steps, the entire hood can be lifted off, for maximum access.
The large collector can be emptied quickly and conveniently from the driver’s seat.
223
Tractors
CTH220 Twin
Engine: Kohler Courage V-Twin OHV. Power: 16.4 kW/22.0 hp.
Engine lubrication type: Full pressure. Fuel tank capacity: 9.5 litres.
Transmission: hydrostatic. Cutting width: 107 cm/42".
Cutting height: 38-102 mm. Cutting height steps: Infinity.
Tyre size, front/rear: 15x6"/20x10". Wheelbase: 119 cm.
CTH220 Twin (2007-)
[FR] CTH220 Twin (2007-)
960 61 01-90
960 61 01-91
*!3J1I8D-beigaa!
· Full pressure-lubricated Kohler VTwin engine
· Oil pump
· Oil filter
· Hydrostatic transmission
· Thick padded steering wheel
· Premium seat
· Large, wide rear tyres, 20x10
· Cup holder
· Hour meter with service minder
· Headlights
· Electric connection of cutting
blades
· Anti-scalp wheels
· Bumper
· Air Induction
· Cast front axle
· Pivoting front axle
· Collector
· BioClip, plug included
· Collection to BioClip (mulching),
no need to change blades
· Deflector (option)
· Full pressure-lubricated Kawasaki
V-Twin engine
· Oil pump
· Oil filter
· Premium seat
· Cup holder
· Headlights
blades
· Bumper (option)
· Air Induction
· Cast front axle
· Collector
*!3J1I8D-beigbh!
CTH180 Twin
Engine: Kawasaki V-Twin OHV. Power: 13.4 kW/18 hp.
CTH180 Twin (2007-)
[FR] CTH180 Twin (2007-)
960 61 01-86
960 61 01-87
*!3J1I8D-beifgd!
*!3J1I8D-beifha!
224
CTH150 Twin
CTH150 Twin (2007-)
[FR] CTH150 Twin (2007-)
960 61 01-81
960 61 01-82
*!3J1I8D-beifbi!
V-Twin engine
· Oil pump
· Oil filter
· Premium seat
· Cup holder
· Headlights
blades
· Bumper (option)
· Air Induction
· Cast front axle
· Collector
V-Twin engine
· Oil pump
· Oil filter
· Premium seat
· Cup holder
· Headlights
blades
· Bumper (option)
· Air Induction
· Cast front axle
· Collector
*!3J1I8D-beifcf!
CTH140 Twin
CTH140 Twin (2007-)
[FR] CTH140 Twin (2007-)
960 61 01-92
960 61 01-85
*!3J1I8D-beigce!
*!3J1I8D-beiffg!
225
CTH191
Engine: Kohler Courage. Power: 14.2 kW/19 hp.
CTH191 (2007-)
[FR] CTH191 (2007-)
960 61 01-88
960 61 01-89
*!3J1I8D-beifih!
· Full pressure-lubricated Kohler
engine
· Oil pump
· Oil filter
· Premium seat
· Cup holder
· Headlights
blades
· Bumper (option)
· Air Induction
· Cast front axle
· Collector
engine
· Oil pump
· Oil filter
· Premium seat
· Cup holder
· Headlights
blades
· Bumper (option)
· Air Induction
· Cast front axle
· Collector
*!3J1I8D-beifje!
CTH171
Engine: Kohler Courage OHV SV530. Power: 12.7 kW/17 hp.
CTH171 (2007-)
[FR] CTH171 (2007-)
960 61 01-83
960 61 01-84
*!3J1I8D-beifdc!
*!3J1I8D-beifej!
226
CT151
Engine: Kohler Courage OHV SV470. Power: 11.2 kW/15 hp.
Transmission: Manual. Cutting width: 92 cm/36". Cutting height: 38102 mm. Cutting height steps: Infinity. Tyre size, front/
rear: 15x6"/18x9.5". Wheelbase: 119 cm.
CT151 (2007-)
[FR] CT151 (2007-)
960 61 01-79
960 61 01-80
*!3J1I8D-beiejf!
engine
· Oil pump
· Oil filter
· Comfort seat
· Cup holder
· Headlights
blades
· Bumper (option)
· Air Induction
· Cast front axle
· Collector
· Oil pump
· Oil filter
· Hydrostatic heavy-duty
transmission
· Pedal-operated hydrostatic
transmission
· Cruise control
· Sliding, angled seat
· Premium seat
· Large, wide rear tyres, 23x10.5
· Extra big petrol tank
· Fuel sight window
· Cup holder
· Headlights
blades
· Fender-mounted cutting height
adjustment
· Nose roller
· Bumper
· Air Induction
· Cast front axle
· Deflector
· BioClip kit (option)
· Step through chassis
*!3J1I8D-beifab!
GTH260 Twin
Engine: Kohler Courage V-Twin OHV. Power: 19.4 kW/26 hp.
Transmission: Hydrostatic (pedals). Cutting width: 137 cm/54".
Cutting height: 38-114 mm. Cutting height steps: 7. Tyre size, front/
rear: 16x6.5"/23x10.5". Wheelbase: 121 cm.
GTH260 Twin (2007-)
960 41 00-45
*!3J1I8D-beieii!
227
YTH220 Twin
Engine: Kohler Courage V-Twin OHV. Power: 16.4 kW/22.0 hp.
rear: 16x6.5"/22x9.5". Wheelbase: 121 cm.
YTH220 Twin (2007-)
[FR] YTH220 Twin (2007-)
960 41 00-27
960 41 00-28
*!3J1I8D-beiedd!
· Oil pump
· Oil filter
transmission
· Cruise control
· Premium seat
· Cup holder
· Headlights
blades
adjustment
· Nose roller
· Bumper
· Air Induction
· Cast front axle
· Collector (option)
· Deflector
V-Twin engine
· Oil pump
· Oil filter
transmission
· Cruise control
· Premium seat
· Cup holder
· Headlights
blades
adjustment
· Bumper (option)
· Air Induction
· Cast front axle
· Deflector
*!3J1I8D-beieea!
YTH180 Twin
rear: 16x6.5"/20x10". Wheelbase: 121 cm.
YTH180 Twin (2007-)
[FR] YTH180 Twin (2007-)
960 41 00-25
960 41 00-26
*!3J1I8D-beiebj!
*!3J1I8D-beiecg!
228
YTH150 Twin
rear: 15x6"/20x10". Wheelbase: 121 cm.
YTH150 Twin (2007-)
[FR] YTH150 Twin (2007-)
960 41 00-21
960 41 00-22
*!3J1I8D-beidhc!
V-Twin engine
· Oil pump
· Oil filter
· Premium seat
· Cup holder
· Headlights
blades
adjustment
· Bumper (option)
· Air Induction
· Cast front axle
· Deflector
engine
· Oil pump
· Oil filter
· Comfort seat
· Cup holder
· Headlights
adjustment
· Bumper (option)
· Air Induction
· Deflector
*!3J1I8D-beidij!
LTH171
Engine: Kohler Courage OHV. Power: 12.7 kW/17.0 hp.
rear: 15x6"/20x10". Wheelbase: 119 cm.
LTH171 (2007-)
[FR] LTH171 (2007-)
960 41 00-23
960 41 00-24
*!3J1I8D-beidjg!
*!3J1I8D-beieac!
229
LTH151
Engine: Kohler Courage OHV. Power: 11.2 kW/15 hp.
rear: 15x6"/18x9.5". Wheelbase: 119 cm.
LTH151 (2007-)
[FR] LTH151 (2007-)
960 41 00-19
960 41 00-20
*!3J1I8D-beidfi!
engine
· Oil pump
· Oil filter
· Comfort seat
· Headlights
adjustment
· Bumper (option)
· Air Induction
· Deflector
engine
· Oil pump
· Oil filter
· Comfort seat
· Headlights
adjustment
· Bumper (option)
· Air Induction
· Deflector
*!3J1I8D-beidgf!
LT151
Engine: Kohler Courage OHV. Power: 11.2 kW/15 hp.
Transmission: Manual. Cutting width: 97 cm/38". Cutting height: 2589 mm. Cutting height steps: 6. Tyre size, front/rear: 15x6"/18x9.5".
Wheelbase: 119 cm.
LT151 (2007-)
[FR] LT151 (2007-)
960 41 00-17
960 41 00-18
*!3J1I8D-beidde!
*!3J1I8D-beideb!
230
231
Specifications for tractors
C T H 2 20 T w i n
C T H 1 80 T w i n
C T H 1 50 T w in
CTH140 Twin
Engine
Kohler Courage V-Twin
OHV
Kawasaki V-Twin OHV
Kawasaki V-Twin OHV
Kawasaki V-Twin OHV
Power
16.4 kW /22.0 hp
13.4 kW /18 hp
11.2 kW /15 hp
11.2 kW /15 hp
Full pressure
Full pressure
Full pressure
Full pressure
9.5 litres
9.5 litres
9.5 litres
5.7 litres
Transmission
hydrostatic
hydrostatic
hydrostatic
hydrostatic
Cutting width
107 cm /42"
107 cm /42"
107 cm /42"
92 cm /36"
Cutting height
38-102 mm
38-102 mm
38-102 mm
38-102 mm
Cutting height steps
Infinity
Infinity
Infinity
Infinity
Tyre size, front/rear
15x6" /20x10"
15x6" /20x10"
15x6" /20x10"
15x6" /20x10"
119 cm
119 cm
119 cm
119 cm
Full pressure-lubricated Kawasaki V-Twin engine
–
•
•
•
Full pressure-lubricated Kohler engine
–
–
–
–
Full pressure-lubricated Kohler V-Twin engine
•
•
•
•
–
–
–
•
•
•
•
•
•
•
•
•
Hydrostatic heavy-duty transmission
–
–
–
–
Pedal-operated hydrostatic transmission
–
–
–
–
Cruise control
–
–
–
–
Thick padded steering wheel
•
•
•
•
Sliding, angled seat
–
–
–
–
Premium seat
•
•
•
•
Comfort seat
–
–
–
–
Large, wide rear tyres, 20x10
•
•
•
•
Large, wide rear tyres, 23x10.5
–
–
–
–
Extra big petrol tank
–
–
–
–
Fuel sight window
–
–
–
–
Cup holder
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fender-mounted cutting height adjustment
–
–
–
–
Anti-scalp wheels
•
•
•
•
Nose roller
–
–
–
–
•
•
•
•
•
•
•
(• )
(• )
(• )
(• )
•
•
•
•
•
•
(• )
•
•
•
•
•
•
(• )
•
•
•
•
•
•
(• )
BioClip kit
–
–
–
–
Step through chassis
–
–
–
–
Engine lubrication type
Fuel tank capacity
Wheelbase
Oil pump
Oil filter
Hydrostatic transmission
Hour meter with service minder
Headlights
Electric connection of cutting blades
Bumper
Air Induction
Cast front axle
Pivoting front axle
Collector
BioClip, plug included
Collection to BioClip (mulching), no need to change blades
Deflector
(•) option
232
C T H1 9 1
C T H 1 71
C T 1 51
GT H260 T wi n
Y T H 220 T w i n
Y T H 1 80 T w in
Kohler Courage
KohlerCourage OHV SV530
Kohler CourageOHV SV470
OHV
OHV
Kawasaki V-Twin OHV
14.2 kW /19 hp
12.7 kW /17 hp
11.2 kW /15 hp
19.4 kW /26 hp
16.4 kW /22.0 hp
13.4 kW /18 hp
Full pressure
Full pressure
Full pressure
Full pressure
Full pressure
Full pressure
5.7 litres
5.7 litres
5.7 litres
15.2 litres
15.2 litres
15.2 litres
hydrostatic
hydrostatic
Manual
Hydrostatic (pedals)
107 cm /42"
92 cm /36"
92 cm /36"
137 cm /54"
122 cm /48"
107 cm /42"
38-102 mm
38-102 mm
38-102 mm
38-114 mm
25-102 mm
25-102 mm
Infinity
Infinity
Infinity
7
7
7
15x6" /20x10"
15x6" /20x10"
15x6" /18x9.5"
16x6.5" /23x10.5"
16x6.5" /22x9.5"
16x6.5" /20x10"
119 cm
119 cm
119 cm
121 cm
121 cm
121 cm
–
–
–
–
–
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
–
–
•
•
•
•
–
•
•
•
•
•
•
•
•
•
–
–
–
•
•
•
•
•
•
–
–
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
–
–
–
•
•
–
–
–
•
–
–
–
•
•
–
–
–
•
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
(• )
•
•
•
•
•
•
•
•
•
•
•
(• )
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
–
•
•
•
•
–
–
–
•
•
•
–
–
–
(• )
(• )
(• )
•
•
•
•
•
•
(• )
•
•
•
•
•
•
(• )
•
•
•
•
•
•
(• )
•
•
•
–
–
–
(• )
(• )
(• )
–
–
–
•
•
•
–
(•) option
233
–
(• )
Y T H 1 50 T w i n
L T H 1 71
LTH151
LT151
Engine
Kawasaki V-Twin OHV
Kohler Courage OHV
Kohler Courage OHV
Kohler Courage OHV
Power
11.2 kW /15 hp
12.7 kW /17.0 hp
11.2 kW /15 hp
11.2 kW /15 hp
Engine lubrication type
Full pressure
Full pressure
Full pressure
Full pressure
Fuel tank capacity
15.2 litres
7.6 litres
5.7 litres
5.7 litres
Transmission
hydrostatic
hydrostatic
hydrostatic
Manual
Cutting width
107 cm /42"
107 cm /42"
97 cm /38"
97 cm /38"
Cutting height
38-102 mm
38-102 mm
25-89 mm
25-89 mm
7
6
6
6
Tyre size, front/rear
15x6" /20x10"
15x6" /20x10"
15x6" /18x9.5"
15x6" /18x9.5"
121 cm
119 cm
119 cm
119 cm
•
–
–
–
Wheelbase
Full pressure-lubricated Kawasaki V-Twin engine
Full pressure-lubricated Kohler engine
–
•
•
•
Full pressure-lubricated Kohler V-Twin engine
–
–
–
–
Oil pump
•
•
•
•
•
•
•
•
•
•
•
Hydrostatic heavy-duty transmission
–
–
–
–
Pedal-operated hydrostatic transmission
–
–
–
–
Cruise control
–
–
–
–
Thick padded steering wheel
•
•
•
•
•
•
•
•
•
–
–
–
•
•
–
–
Oil filter
Hydrostatic transmission
Sliding, angled seat
Premium seat
–
Comfort seat
–
Large, wide rear tyres, 20x10
•
•
•
Large, wide rear tyres, 23x10.5
–
–
–
–
Extra big petrol tank
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
–
–
–
–
•
•
–
–
–
•
•
•
•
–
–
Fuel sight window
Cup holder
Hour meter with service minder
Headlights
Electric connection of cutting blades
Fender-mounted cutting height adjustment
Anti-scalp wheels
–
–
–
–
Bumper
(• )
(• )
(• )
(• )
Air Induction
•
•
•
(• )
•
•
•
–
–
–
•
•
•
(• )
(• )
(• )
BioClip, plug included
–
–
–
–
Collection to BioClip (mulching), no need to change blades
–
–
–
–
Nose roller
Cast front axle
Pivoting front axle
Collector
Deflector
•
•
•
•
BioClip kit
(• )
(• )
(• )
(• )
•
•
•
•
Step through chassis
(•) option
234
Accessories for Riders and
Tractors
Scarifier
Makes holes in the lawn so that air, water and fertiliser can penetrate.
Working width 102 cm.
Scarifier
964 99 57-03
*!3J1I8D-aebaei!
Moss rake
Strong and rugged. Width 102 cm.
Moss rake
954 12 00-43
*!3J1I8D-aheeai!
Gravel harrow
Adjustable working depth. Rubber wheels. Width 110 cm. Rotating teeth
which fold when the harrow is reversed.
Gravel harrow
953 51 24-01
*!3J1I8D-aeajgg!
235
Spreader
Spreading width 3-3.6 metres. Capacity approximately 75 kg. Easily
adjustable flow.
Spreader, max load 75 kg
954 12 00-42
*!3J1I8D-aheehd!
Spreader
Handy spreader for smaller areas. Max capacity 30 kg. Spreading width
1.2–2.4 metres.
Spreader, max load 30 kg
954 12 00-46
*!3J1I8D-aiaije!
Trailer Profi
Rugged dump trailer, folder tailgate. Wheels 18x8,5. Dim. 90x123x30 cm.
Trailer Profi
953 51 17-02
*!3J1I8D-adihhc!
Trailer 275
Rugged dump trailer, folder tailgate. Wheels 16x4. Dim. 82,5x124,5x30,5
cm.
Trailer 275
954 12 00-44
*!3J1I8D-aheejh!
236
Aerator TA36
Aerator
5 containers
540 00 00-73
540 00 00-74
*!3J1I8D-ahhbcc!
*!3J1I8D-ahiege!
Snow chains
With studs. Ensure a reliable grip when clearing snow.
16x6,5–8" pair
18x7,50–8" pair, 5,4 edge
20x8-8" pair - Tractor
964 99 30-01
535 41 47-08
531 00 65-83
*!3J1I8D-aafiae!
*!3J1I8D-ahedbc!
*!3J1I8D-afdahc!
16x7,5-8" pair
18x8,5-8" pair - Tractor
20x10-8" pair - Tractor
531 01 16-37
964 99 43-01
997 10 31-10
*!3J1I8D-adhgef!
*!3J1I8D-adbddj!
*!3J1I8D-aafiec!
18x7,5–8" pair
18x8,5-8" pair, four-edge chain - Tractor (square, no studs)
22x9.5-12" pair - Tractor
531 00 65-81
531 00 65-84
501 32 76-01
*!3J1I8D-aejagi!
*!3J1I8D-afdaij!
16x6,5-8" pair, 5,4 edge
18x9,5-8" pair - Tractor
23x10.5-12" pair - Tractor
535 41 47-07
997 10 36-10
501 00 14-01
*!3J1I8D-ahedaf!
*!3J1I8D-aafjch!
Loading ramps
Straight or curved loading ramps made of sea water resistant aluminium
with the well-known slip resistant surface O3, which gives any wheel a
secure grip even in wet and slippery environments. The loading ramps are
well suited for use on trailers with a height up to 700 mm, and for a
maximum total load of 450 kg. The ramps are sold in pairs.
Straight ramps 200x1500x35 O3L-3
Curved ramps 200x1500x35 O3BL-3
505 69 90-40
505 69 90-41
*!3J1I8D-aideic!
*!3J1I8D-aidejj!
Straight ramps 200x2000x50 O4L-3
Curved ramps 200x2000x50 O4BL-3
505 69 90-42
505 69 90-43
*!3J1I8D-bdaeid!
*!3J1I8D-bdaeja!
237
*!3J1I8D-bgabfc!
*!3J1I8D-bfiija!
Husqvarna battery charger
Battery charger XS 800, 100% automatic. It fully charges the battery in
three steps including pulse maintenance for maximum performance and
service life. Can be connected for months. Perfect for seasonal vehicles.
Quick connectors. Revives, charges, checks and maintenance charges.
Patented spark and polar changing guard giving no sparks. Short circuit
and reverse polarity protected. Minimum gassing. Approved for outdoor
use – watertight. The charger is electronic safe, which means you do not
need to remove the battery from the vehicle when charging.
531 00 92-96
*!3J1I8D-aidfed!
Brush
A rotating brush for sweeping up leaves, snow, etc. Adjustable support
wheels. Can be angled 20° to either side. Width 100 cm.
LT/LTH/YTH from model year 2007
LT/LTH/YTH up to model year 2006 and all CT/CTH tractors
544 92 16-01
953 51 61-01
*!3J1I8D-beijef!
*!3J1I8D-adggig!
Two-stage snow thrower
Two-stage snow thrower with 107 cm working width. Ejector can be
rotated 180°. Should be used with snow chains and counterweight.
For all tractors
544 92 18-01
*!3J1I8D-beijgj!
Snow blade
Rugged steel blade with protective spring mechanism. 122 cm working
width. Can be set to different angles, to the right or left. Replaceable
scraper bar. Should be used with snow chains and counterweight.
For all tractors
544 92 17-01
*!3J1I8D-beijfc!
238
Wheel weights
Wheelweights onthe tractor’s driving wheels improves accessibilitye.g. on
snow or muddy ground.
Pair, rear LR/LT/LTH (small frame models up to model year
2000)
964 99 41-01
*!3J1H3G-aahbbf!
Counterweight
Counterweight for improved grip and accessibility. To be mounted on the
rear-end of the frame. Weight 25 kg.
For LT/LTH/YTH/GTH models (except old small frame models
up to model year 2000)
For CT/CTH models
501 00 81-01
501 00 81-02
*!3J1I8D-bfjage!
*!3J1I8D-bgddfb!
Bumper
Practical bumper, for installation on the front of our tractors. Protects the
engine hood effectively.
Bumper
954 12 00-49
*!3J1I8D-aidceg!
Cover
Full size cover for tractor. Made in water resistant nylon. Adjustable
drawstring at the lower part, ventilation holes.
Small cover for YTH (to model year 2006) and LT/LTH models
Big cover for GTH, YTH (from model year 2007) and CT/CTH
models
505 63 08-80
505 63 08-82
*!3J1I8D-ahbafc!
*!3J1I8D-aidhij!
239
Collector
Large capacity collector available with two or three compartments. 210/
315 litres.
42" (107 cm), 3 bags, LT/YT/YTH (medium frame)
97 cm, 2 bags, LT/LTH (highlift blades incl)
954 04 05-03
960 71 00-01
*!3J1H3G-aahafe!
*!3J1I8D-aidfcj!
42" (107 cm), 2 bags, LT/YT/YTH (medium frame)
36" (92 cm), 2 bags, LT/LTH (small frame)
36" (92 cm), 2 bags, LT/LTH (medium frame)
964 77 51-00
954 04 05-06
964 77 50-00
(!0BB75J-achjhh!
*!3J1H3G-aahaeh!
Conversion kit for collectors
Converts the 36" (964 77 50-00/954 12 00-93) and 38" (964 77 53-00) grass
collectors to fit the 97 cm cutting deck. Includes upper and lower chutes
plus blades.
960 71 00-02
*!3J1I8D-bgabgj!
Deflector
For tractors with integrated collection. Convert the tractor from collection
to rear discharge. With the deflector, the cuttings are directed backwards
and downwards.
CT/CTH
954 12 00-91
*!3J1I8D-aeehia!
240
(!0BB75J-achjga!
BioClip kit
54" (137 cm), blades included, GTH
42" (107 cm), blades inluded, LT/YT/YTH
954 12 00-53
954 04 04-41
*!3J1I8D-adegjj!
46" (117 cm), blades included, LT/YT/YTH
42" (107 cm), BioClip plate only, LT/YT/YTH
36" (92 cm), blades included, LT/LTH
954 04 06-12
954 04 05-01
954 04 04-91
*!3J1I8D-adegee!
*!3J1I8D-adegic!
*!3J1I8D-adegag!
46" (117 cm), BioClip plate only, LT/YT/YTH
97 cm, BioClip plate only, LT/LTH
36" (92 cm), BioClip plate only, LT/LTH
954 04 06-10
960 71 00-03
954 04 05-04
*!3J1I8D-adegfb!
*!3J1I8D-bdhbcd!
*!3J1I8D-aahieg!
Cutting decks
A complete range of cutting decks in widths from 94 cm up to 122 cm,
offering the new Combi deck. A combination deck with the cutting
methods BioClip and Rear discharge included in one and same deck.
Combi 94 XP - PR 15/PR 18/PR 18 AWD/Rider Pro 15/Pro 18/
Pro 18 AWD
Combi 94-kit - Replacing kit for BioClip 90 (Rider 11 BioClip/
Rider 13 BioClip)
965 08 60-01
*!3J1I8D-behjhj!
Combi 103 - Rider 16/155/155 AWD/15-V2/15-V2 AWD
965 07 84-01
*!3J1I8D-bdgaij!
953 53 67-01
*!3J1I8D-aidgia!
Pro 18 AWD
Combi 112 XP – PF 18/PF 21/PF 21 AWD/ProFlex 18/ProFlex
21/ProFlex 21 AWD
965 07 86-01
965 07 88-01
*!3J1I8D-bdgbac!
*!3J1I8D-bdgbcg!
Combi 112 – Rider 16/155/155 AWD/15-V2/15-V2 AWD
Pro 18 AWD
Combi 122 XP – PF 18/PF 21/PF 21 AWD/ProFlex18/ProFlex
21/ProFlex 21 AWD
965 07 85-01
965 07 87-01
953 53 69-01
*!3J1I8D-bdgajg!
*!3J1I8D-bdgbbj!
241
*!3J1I8D-aidhad!
Wheel weights
With ball bearings for a better grip and safer driving.
One pce Rider 11/11 C/13 C/15 C/175/15V2
One pce PR 15/18/Rider Pro 15/18
One pce PF18/21/ProFlex 18/21
953 51 59-01
953 52 80-01
964 99 17-01
*!3J2J3A-abhjgc!
*!3J1I8D-aeehci!
*!3J1I8D-aafhib!
Counterweight
18 kg. For a better grip and safer driving.
953 53 49-01
*!3J1I8D-ahgjfi!
Catalytic converter
Reduce the emissions of hydrocarbons and nitrous oxides by up to 50%
and of carbon monoxide by 25% on engines with already low emissions.
Rider 11/11 C/13 C/13 AWD/15 C/175/175 AWD/15V2/15V2
AWD
953 51 55-01
*!3J1I8D-adhade!
Protection plate
Robust lacquered steel plate for protection of rear transmission,
connectors and hydraulic hoses.
PF 21 AWD
PR 18 AWD
R13 AWD/R155 AWD/R175 AWD/R15V2 AWD
544 06 93-01
544 06 93-02
544 06 93-03
*!3J1I8D-bgigai!
*!3J1I8D-bgigbf!
242
*!3J1I8D-bdjhdi!
Cover for Rider
Full size cover for Riders. Made in water resistant nylon. Adjustable
drawstring at the lower part, ventilation holes.
505 63 08-70
*!3J1I8D-ahbaef!
Brush Profi
A rotating brush for sweeping up leaves, snow, etc. Can be angled 20° to
either side. Width 120 cm.
Rider 16/155/175/15V2/PR 15/18
Rider 155 AWD/175 AWD/15V2 AWD/PR 18 AWD
PF 18/21/21 AWD
953 53 79-01
965 07 08-01
953 53 78-01
*!3J1I8D-bcjhhh!
*!3J1I8D-bddjba!
Snow blade
Rugged steel blade with steel blade edge. Rubber blade available as an
attachment. Five angles (0°, 15° and 30° to right or left). Working width
120 cm. Must be used with snow chains and wheel weights.
Rider 11
Rider 13 AWD/155 AWD/175 AWD/15V2 AWD/PR 18 AWD
953 53 07-01
965 07 09-01
*!3J1I8D-afchcd!
*!3J1I8D-bddjch!
Rider 11 C/13 C/15 C/16/155/175/15V2/PR 15/18
PF 18/21/21 AWD
953 53 06-01
953 51 63-01
*!3J1I8D-afchda!
*!3J1I8D-adhgfc!
Rubber blade
Fits 953 53 06-01, 953 53 07-01, 965 07 09-01
Fits 953 51 63-01
531 02 12-40
531 00 71-34
*!3J1I8D-afdgbe!
*!3J1I8D-afdghg!
243
*!3J1I8D-bcjhie!
Folding plough
Compact and flexible folding plough in heavy-duty steel performance.
Mechanical adjustment of the blades makes it usable as an V-plough, point
plough or diagonal plough. Equipped with rubber scrape blade. Working
width 120 cm, weight 48 kg.
PF 21/21 AWD
965 17 44-01
*!3J1I8D-bgdcbe!
Snow blower Profi
A highly effective, heavy-duty single-stage blower with a working width of
100 cm. The snow blowerhasa gearbox andalightweight constructionthat
makes it easy to attach. Chute rotates through 210°. Wheel weights and
snow chains should be fitted when using asnow blower. Forsafety reasons a
Rider with snow blower should not be used on gradients that are steeper
than 10° in any directions.
PF 18/21/21 AWD
953 52 48-01
*!3J1I8D-ahidch!
Flail Mower Profi
The flail mowerhas a gearbox and alightweight construction that makes it
easy to attach.
PF 18/21/21 AWD
953 52 84-01
*!3J1I8D-aiabga!
Grammer seat GS12
Soft, padded comfort seat. Steering wheel and pedal distance, lower back
support and seat position can be adjusted individually. Adjustable
springing.
PF 18/PF 21/PF 21 AWD/ProFlex 18/ProFlex 21/ProFlex 21
AWD
964 99 96-02
*!3J1I8D-ahefjg!
244
Armrests Premium seat
Hinged armrests with fittings
Armrest for Premium seat, pair - PR 15/18/18 AWD/PF 18/21/
21 AWD/Pro 15/18/18 AWD/ProFlex 18/21/21 AWD
535 45 86-01
Sweeper/Collector
Adjustable height setting. Can be emptied from operator's seat. Working
widths 82 and 96 cm.
960, 38”
820, 32”
953 52 59-01
953 52 58-01
*!3J1I8D-aheefj!
*!3J1I8D-aheeec!
Spreader Profi
A rugged, high-quality spreader for professional use. An electrically
operated spreader roller guarantees uniform and reliable spreading. The
protective grille on top can also be used as a screen when filling with
fertiliser, salt, sand or fine gravel with a particle size up to 10 mm. When
used on winter roads the towing machine should be fitted with wheel
weights and snow chains. For safety reasons the spreader should not be
used on gradients that are steeper than 10° in any direction.
All
953 52 49-01
*!3J1I8D-ahegac!
Hoe iron
Effectively removes weeds, etc. from gravel paths. Can be used together
with the gravel harrow.
PR 15/18
PF 18/21
953 51 26-03
953 51 26-02
*!3J1I8D-bcjbae!
*!3J1I8D-ahecic!
245
Edger
For trimming and adjusting grass edges. Adjustable trimming depth.
Rotatable for tilt on insede or outside.
Rider 11/11C/13 C/15 C/16/155/175/15V2/PR 15/18
PF 18/21
953 53 10-01
953 51 25-02
*!3J1I8D-afdgid!
*!3J1I8D-ahecjj!
Super bagging blades, no BioClip function
Kit, left+right CT/CTH 92 cm
Super bagging blade right, 6-star pattern CT/CTH 92 cm
Super bagging blade left, 5-star pattern CT/CTH 107 cm
532 18 28-51
532 18 28-04
532 17 57-92
Super bagging blade left, 5-star pattern CT/CTH 92 cm
Kit, left+right CT/CTH 107 cm
Super bagging blade right, 6-star pattern CT/CTH 107 cm
532 18 28-03
532 18 28-52
532 17 57-93
Packed blades
L:300 mm - Rear 85
L:430 mm - Rear 120
531 00 50-11
531 00 50-09
*!3J1I8D-acjgac!
*!3J1I8D-acjfij!
L:345 mm - Side 97, Rear 97
L:407 mm
531 00 50-10
531 00 75-24
*!3J1I8D-acjfjg!
*!3J1I8D-aedafj!
BioClip L:405 mm
L:377 mm - BioClip 90
BioClip 112, Combi 112
531 00 50-79
531 00 75-25
531 00 60-97
*!3J1I8D-adcihj!
*!3J1I8D-aedbjg!
246
*!3J1I8D-afgdcf!
247
Technical solutions
for ZTH.
Professional lawn care, where the machines have to be transported between sites quickly, easily and
efficiently, requires machines that combine high efficiency with a compact, transport-friendly design.
The ZTH mowers, with their short size, big cutting width and ability to turn on their own axis,
can do all they need to do.
The compact design saves space during transport and makes the mowers easy to load and unload. Individual, separate wheel motors mean the mowers can turn
around their own axis and can be manoeuvred with maximum precision. Powder-coated, sturdy frames, all-welded cutting decks and generously dimensioned materials
and parts make the mowers seriously strong and durable.Wide cutting deck and high cutting speed give them the capacity to handle larger areas. Efficient oil cooling
ensures the oil maintains a constant temperature and enables the mowers to work hard, for long periods.
Two-cylinder Kawasaki FH engines
with low emissions. Meet requirements of EPA II and CARB II.
Thanks to the neoprene dampers between the chassis, seat and engine, the
mowers have very low vibration levels. Solid controls, easy steering with levers,
comfortable vibration-dampened seat with armrests combine for an excellent
working environment for the user.
248
Large, 44-litre tanks.The tanks also
function as splash guard and have
built-in drink holders.
Zero turn mowers
Z18
Manufacturer, type: Kohler Courage OHV/SV540.
Power: 13.2 kW/18 hp. Displacement: 535 cm³/32.6 cu.inch.
Lubrication: pressure with oilfilter. Cooling: air. Manufacturer: HydroGear. Type: EZT. Tyres, front/rear: 11x3.50-5/18x8.50-8".
Cutting width: 107 cm/42". Cutting height: 3.8-11.4 cm/1.5-4.5".
Base machine (LxWxH): 183x127x104 cm/72x50x41".
Weight (excl. cutting deck): 258 kg/568 lbs.
· Folding armrests
· Timer
· Pedal-assisted cutting deck lift
· Collector System (option)
· Mulching Kit (option)
· Folding armrests
· Timer
· Folding armrests
· Timer
Z18
968 99 95-01
*!3J1I8D-bfedci!
EZ17
Manufacturer, type: Kawasaki V-Twin OHV/FH531V KAI.
Power: 12.5 kW/17.0 hp. Displacement: 494 cm³/30.1 cu.inch.
Lubrication: pressure with oilfilter. Cooling: air. Manufacturer: HydroGear. Type: ZT 2800. Tyres, front/rear: 11x4.00-5/18x9.50-8".
EZ17
968 99 95-02
*!3J1I8D-bfeddf!
EZ21
Manufacturer, type: Kawasaki V-Twin OHV/FH531V.
Lubrication: pressure with oilfilter. Cooling: air. Manufacturer: HydroGear. Type: ZT 2800. Tyres, front/rear: 11x4.00-5/18x9.50-8".
EZ21
968 99 95-03
*!3J1I8D-bfedec!
249
iZ21
Lubrication: pressure with oilfilter. Cooling: air.
Manufacturer: Parker Ross/Parker Ross. Type: Pump/Wheel Motor.
Tyres, front/rear: 13x5.00-6/23x10.50-12". Cutting width: 122 cm/48".
Cutting height: 3.8-12.7 cm/1.5-5".
Base machine (LxWxH): 194x124.5x108 cm/76.5x49x42.5".
Weight (excl. cutting deck): (300) kg/(660) lbs.
· Vibration-dampened seat/footrest
· Deluxe Seat (option)
· Premium Seat
· Folding armrests
· Timer
· Ball bearing front wheels
· Lever adjustment kit (option)
· ROPS, Roll Over Protection
System (option)
· Oil cooler
· Vibration-damping engine
· Deluxe Seat (option)
· Premium Seat
· Folding armrests
· Timer
· Striper Kit (option)
System (option)
· Oil cooler
· Deluxe Seat
· Folding armrests
· Timer
· Maintenance lift (option)
System (option)
iZ21
968 99 93-06
*!3J1I8D-bdicgh!
LZ25
Lubrication: pressure with oilfilter. Cooling: air.
Tyres, front/rear: 13x6.50-6/24x12.00-12".
Cutting width: 132/155 cm/52/61". Cutting height: 3.8-15.3 cm/1.5-6".
LZ25
968 99 93-10
*!3J1I8D-bdicdg!
BZ27D
Manufacturer, type: Daihatsu Diesel 3 cyl./DM950D.
Lubrication: pressure with oilfilter. Cooling: Water.
Tyres, front/rear: 13x6.50-6, 4 ply smooth tread/26x12.00-12 Turf".
Cutting width: 155 cm/61". Cutting height: 3.8-15.3 cm/1.5-6".
Base machine (LxWxH): 241x185x118 cm/95x73x46.5".
BZ27D
968 99 93-15
*!3J1I8D-bdiced!
250
BZ34D
Manufacturer, type: Daihatsu TurboDiesel 3 cyl./DM954DT.
Lubrication: pressure with oilfilter. Cooling: Water.
Tyres, front/rear: 13x6.50-6/26x12.00-12".
Cutting width: 155/183 cm/61/72". Cutting height: 3.8-15.3 cm/1.5-6".
Base machine (LxWxH): 241x185x118 cm/95x73x46.5".
BZ34D
968 99 93-16
*!3J1I8D-bdicfa!
251
· 34 HP TurboDiesel Engine
· Oil cooler
· Deluxe Seat
· Folding armrests
· Timer
· Hydraulic cutting deck lift
· Maintenance lift (option)
System (option)
Specifications for ZTH
Manufacturer, type
Power
Z18
EZ1 7
E Z21
Kohler Courage OHV/SV540
Kawasaki V-Twin OHV/FH531V KAI
Kawasaki V-Twin OHV/FH531V
13.2 kW /18 hp
12.5 kW /17.0 hp
15.4 kW /21.0 hp
Displacement
535 cm³ /32.6 cu.inch
494 cm³ /30.1 cu.inch
494 cm³ /30.1 cu.inch
Lubrication
pressure with oilfilter
air
air
air
Hydro-Gear
Hydro-Gear
Hydro-Gear
EZT
ZT 2800
ZT 2800
11x3.50-5 /18x8.50-8"
11x4.00-5 /18x9.50-8"
11x4.00-5 /18x9.50-8"
Cooling
Manufacturer
Type
Tyres, front/rear
Cutting width
107 cm /42"
107 cm /42"
137 cm /54"
Cutting height
3.8-11.4 cm/1.5-4.5"
3.8-11.4 cm/1.5-4.5"
3.8-11.4 cm/1.5-4.5"
Base machine (LxWxH)
183x127x104 cm/72x50x41"
183x127x104 cm/72x50x41"
183x127x104 cm/72x50x41"
Weight (excl. cutting deck)
258 kg /568 lbs
286 kg /629 lbs
293 kg /645 lbs
34 HP TurboDiesel Engine
–
–
–
Oil cooler
–
–
–
Vibration-damping engine
–
–
–
Vibration-dampened seat/footrest
–
–
–
Deluxe Seat
–
–
–
Premium Seat
–
–
–
Folding armrests
•
•
•
•
•
•
Ball bearing front wheels
–
–
–
Pedal-assisted cutting deck lift
•
•
•
Hydraulic cutting deck lift
–
–
–
Maintenance lift
–
–
–
(• )
(• )
(• )
–
–
–
(• )
(• )
(• )
Striper Kit
–
–
–
ROPS, Roll Over Protection System
–
–
–
Timer
Collector System
Lever adjustment kit
Mulching Kit
(•) option
252
i Z21
LZ 25
B Z 27D
B Z3 4D
Daihatsu Diesel 3 cyl./DM950D
Daihatsu TurboDiesel 3 cyl./DM954DT
15.4 kW /21 hp
18.5 kW /25 hp
20.1 kW /27.0 hp
25.0 kW /34.0 hp
675 cm³ /41.19 cu.inch
675 cm³ /41.19 cu.inch
950 cm³ /57.98 cu.inch
954 cm³ /58.22 cu.inch
air
air
Water
Water
Parker Ross/Parker Ross
Pump/Wheel Motor
Pump/Wheel Motor
Pump/Wheel Motor
Pump/Wheel Motor
13x5.00-6 /23x10.50-12"
13x6.50-6 /24x12.00-12"
13x6.50-6, 4 ply smooth tread/26x12.00-12
Turf"
13x6.50-6 /26x12.00-12"
122 cm /48"
132/155 cm /52/61"
155 cm /61"
155/183 cm /61/72"
3.8-12.7 cm/1.5-5"
3.8-15.3 cm/1.5-6"
3.8-15.3 cm/1.5-6"
3.8-15.3 cm/1.5-6"
194x124.5x108 cm/76.5x49x42.5"
208x158x109 cm/82x65x43"
241x185x118 cm/95x73x46.5"
241x185x118 cm/95x73x46.5"
(300) kg /(660) lbs
(380) kg /(836) lbs
(600) kg /(1320) lbs
(635) kg /(1397) lbs
–
–
–
–
•
•
•
(• )
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
•
•
•
•
•
•
•
–
•
(• )
•
•
•
•
•
–
–
–
–
•
–
–
(• )
(• )
–
–
–
–
(• )
(• )
(• )
(• )
(• )
(• )
(• )
(• )
–
(• )
–
–
(• )
(• )
(• )
(• )
(•) option
253
Commercial mower accessories
Containers for TA 36
Set of 5 heavy duty containers.
5 containers
540 00 00-74
*!3J1I8D-ahiege!
Mulching kit (CZ/Z)
Mulching kit (CZ4818)
Mulching kit 42" (Z18) no blades only plug
Mulching kit 54" (Z18) blades included
960 71 00-04
960 71 00-05
960 71 00-06
*!3J1I8D-becdcf!
*!3J1I8D-adegic!
*!3J1I8D-adegjj!
Collection System (CZ/Z)
Bagging kit (CZ4818)
Collector Z 42 (Z18) 211 litre
968 99 92-11
968 99 95-20
*!3J1I8D-ahjjhd!
*!3J1I8D-bfedbb!
Mulching kit (EZ)
Mulching kit 42" (EZ17) no blades only plug
Mulching kit 42" (EZ17) blades included
Mulching kit 54" (EZ21) blades included
960 71 00-05
960 71 00-06
960 71 00-07
*!3J1I8D-adegic!
*!3J1I8D-adegjj!
Collection System (EZ)
Collector EZ 42 (EZ17) 317 litre
Collector EZ 54 (EZ21) 317 litre
968 99 95-21
968 99 95-22
*!3J1I8D-bfedgg!
*!3J1I8D-bfedfj!
254
*!3J1I8D-beddjb!
Cutting decks
Awide range of commercial cutting decks in widths from 122 cm up to 183
cm. Offering the Side discharge TunnelRam deck and the unique Combi
deck. A combination deck with the cutting methods BioClip and Rear
discharge included in one and same deck.
Combi 122, 48 inch (iZ)
TunnelRam 132 (Side discharge), 52 inch (LZ)
Combi 155, 61 inch (BZ)
968 99 93-47
968 99 93-43
968 99 93-50
*!3J1I8D-bdidbb!
*!3J1I8D-bdiche!
*!3J1I8D-bdidec!
TunnelRam 122 (Side discharge), 48 inch (iZ)
Combi 155, 61 inch (LZ)
TunnelRam 155 (Side discharge), 61 inch (BZ)
968 99 93-42
968 99 93-49
968 99 93-45
*!3J1I8D-bdicbc!
*!3J1I8D-bdiddf!
*!3J1I8D-bdicji!
Combi 132, 52 inch (LZ)
TunnelRam 155 (Side discharge), 61 inch (LZ)
TunnelRam 183 (Side discharge), 72 inch (BZ)
968 99 93-48
968 99 93-44
968 99 93-46
*!3J1I8D-bdidci!
*!3J1I8D-bdicib!
*!3J1I8D-bdidae!
Mulching kit (ZTH/iZ/LZ/BZ)
Mulching kit 42” (not TunnelRam)
Mulching kit 61" (LZ/BZ, TunnelRam)
539 10 53-66
539 10 51-29
539 11 13-53
*!3J1I8D-aibiie!
*!3J1I8D-agicgh!
*!3J1I8D-bdigfg!
Mulching kit 52" (LZ, TunnelRam)
539 10 47-35
539 11 13-52
539 10 55-72
*!3J1I8D-ahedib!
*!3J1I8D-bdigej!
*!3J1I8D-ahedji!
Mulching kit 48" (iZ, TunnelRam)
Mulching kit 72" (BZ, TunnelRam)
539 11 13-51
539 10 51-28
539 11 13-54
*!3J1I8D-bdieij!
*!3J1I8D-agiche!
Anti striping baffle kit
For 155 cm (61"), fits LZ/BZ not TunnelRam
For 183 cm (72"), fits BZ not TunnelRam
539 11 00-06
539 11 00-07
*!3J1I8D-bdiejg!
*!3J1I8D-bdifac!
255
*!3J1I8D-bdiggd!
Striper kit
Create beautiful manicured lawns with this durable, easy-to-use Roller
System (Wembley stripes). This fits all Large-Frame ZTH mowers only!
52 inch, not TR (ZTH5223)
61 inch, not TR (ZTH6125)
539 10 82-18
539 10 82-19
*!3J1I8D-aibiga!
*!3J1I8D-aibihh!
Double rear deck roller kit
Two anti-scalping wheels mountedunderneath the cutting deck inthe rear
for minimizing the risk for scalping the lawn.
Roller kit 52"/61"/72" (not Tunnelram)
539 10 54-24
*!3J1I8D-aheeae!
Pedal-assisted cutting deck lift
User-friendly cutting deck lift that simplifies the lifting action through
pedal control.
ZTH5223/ZTH6125
iZ, standard from 2005
539 10 51-80
539 10 55-50
*!3J1I8D-agicib!
*!3J1I8D-aibidj!
Handle extensions
Handle extensions (standard from 2006)
539 10 67-75
*!3J1I8D-ahedhe!
256
Premium Seat
Premium seat for extra comfort.
Premium seat - ZTH/iZ/LZ (standard on BZ)
539 10 78-59
*!3J1I8D-aibicc!
Aggressive tire
Assembly, Rt (ZTH/LZ)
Assembly, Lt (ZTH/LZ)
Tire only (ZTH/LZ)
539 10 72-37
539 10 72-38
539 10 72-39
*!3J1I8D-aheded!
*!3J1I8D-ahedfa!
*!3J1I8D-ahedgh!
Roll-bar - ROPS
ROPS to reduce the risk of accidents in case of the mower should roll.
Mounted directly to the chassis. Safety belt included.
ZTH5223/ZTH6125 (non foldable)
iZ21 (foldable)
539 10 71-53
539 11 14-43
*!3J1I8D-aibieg!
*!3J1I8D-beaheb!
BZ6127/BZ6134/BZ7234 (non foldable)
LZ25 (foldable)
BZ27/BZ34 (foldable)
539 10 82-57
539 11 14-44
539 11 08-84
*!3J1I8D-aibifd!
*!3J1I8D-beafhe!
257
*!3J1I8D-beaffa!
Maintenance lift
Hydraulic lift arm raises the front of the machine, ensuring easieraccess to
the cutting deck.
BZ6134/BZ7234/BZ34
539 10 82-01
*!3J1I8D-aicfga!
258
259
special products for lawn care.
The various special machines for lawn care have been developed to handle particular work
procedures optimally, and are utilised for pure professional use or for rental. Apart from having
to be efficient and convenient to use, they must also meet tough demands for durability,
reliability and user-friendliness.
Reliable OHV engines from Honda. Meet emission requirements from EPA II
and CARB II. CAT – catalytic converter that reduces hydrocarbons and nitrous
oxides by up to 50 and 25% respectively. Available as an accessory.
The DT 22 scarifier has everything a true rental machine should have: durability,
compact design and folding handle for convenient transport.
The handle on the DT 22 provides an ideal ergonomic working position.
The DT 22 can also be fitted with a spacious collector or be equipped with
a seed hopper and be used for sowing.
The DT 22 is a versatile scarifier that can be fitted with either spring tines,
flail blades or delta blades, depending on the requirements.
Compact design makes the stump grinder handy and easy to operate
in narrow spaces.
260
The adjustable handlebar of the stump grinder makes it easier to work
below ground level.
The stump grinder has teeth with tips of tungsten carbide for maximum
durability.
Our standard aerators and hollow-tine aerators have a patented free-wheel
design for optimum manoeuvrability.
Removable weights on our standard aerators and hollow-tine aerators
ensure stable, efficient operation on slopes and uneven areas.
Standard aerators/hollow-tine aerators.With the centre of gravity above
the roller, the tines penetrate to the maximum depth.
The SC 18 sod cutter has four-wheel drive, which makes it handy and
convenient to manoeuvre and transport.
The SC 18 has a vibration-dampened handlebar, which protects the operator
and makes it easy to work with great precision.
The SC 18 can quickly and efficiently cut 46 cm wide and up to 6 cm thick
pieces of turf.
261
Aerators
TA36
Tyre size, front/rear: 12x3". Aerating pattern: 112x152 mm/4.4x6.0".
Aerating depth: 0-76 mm/0-3". Aerating width: 92 cm/36".
Number of tines: 32. Detachable weights: 5 containers 86-210 kg.
Productivity: 10 000 m²/h. Weight, net: 86 kg/190 lbs.
TA36
5 containers
540 00 00-73
540 00 00-74
*!3J1I8D-ahhbcc!
· Two independent rollers with hollow tines
· Five weight containers for adjusting the working pressure (option)
· The side wheels also prevent damage to walls
*!3J1I8D-ahiege!
AR19
Engine manufacturer: Honda. Engine type: GX120 OHV.
Power: 3 kW/4 hp. Cylinder displacement: 118 cm³/7.3 cu.inch.
Air filter: two-step. Fuel tank capacity: 2.5l/0.66 gallon. Tyre size, front/
rear: 10x6/8x2". Aerating pattern: 96x165 mm.
Aerating depth: 76 mm/3". Aerating width: 48 cm/19".
Number of tines: 30. Detachable weights: 2x16.3 kg.
Productivity: 2300 m²/h. Noise level / at rpm: 98.3 dB(A).
Product size, LxWxH: 110x76x131 cm. Weight, net: 131 kg/291 lbs.
AR19
968 98 21-02
*!3J1I8D-afgbch!
262
· Patented free-wheel design
· Five rows of tines, a total of 30
· Automatic decompression for easy
starts
· Electronic ignition
· Warning indicator when oil level is
low
· Stable, pneumatic front wheel
· Folding handlebar
Sod Cutters
SC 18
Engine manufacturer: Honda/GX 160 OHV. Power: 4.0 kW/5.5 hp.
Cylinder displacement: 163 cm³/9.9 cu.inch. Air filter: Two-stage.
Fuel tank capacity: 3.6l/0.95 gallon. Gears, forward+reverse: 4+1.
Tyre size, front/rear: 10/10". 4-wheel drive: Yes.
Working depth: 60 mm/2.4". Working width: 46 cm/18".
Product size, LxWxH: 137x61x91 cm. Weight: 149 kg/331 lbs.
SC 18
968 99 95-10
*!3J1I8D-bfedhd!
263
Stump grinders
SG13
Engine manufacturer: Honda. Engine type: GX390 OHV.
Cylinder displacement: 389 cm³/23.7 cu.inch.
Power / at rpm: 9.5 kW/3600 rpm. Power / at rpm: 13 hp/3600 rpm.
Fuel tank volume: 6.5l/13.8 US pint. Tyres: 4.10-6".
Drive belt: Gates HiPower BP54.
Cutting equipment diameter: 35.6 cm/14". Teeths: 8.
Working depth: 30 cm/12". Brakes: Disc.
Product size, LxWxH: 185x69x109 cm/73x27x43".
Weight: 113 kg/249 lbs.
· Compact size and low weight
· Strong handlebar, adjustable to
four angles
· Automatic decompression for easy
starts
SG13
968 98 23-02
*!3J1I8D-afgbfi!
264
· Electronic ignition
· Warning indicator when oil level is
low
· Noram centrifugal clutch
· Hayes Disc brake, lever activated
Dethatchers
DT22
Engine manufacturer: Honda. Engine type: GX 160 OHV.
Power: 4 kW/5.5 hp. Cylinder displacement: 163 cm³/7.3 cu.inch.
Engine lubrication: permanently lubricated. Air filter: yes.
Fuel tank capacity: 2.5l/0.66 gallon. Tyre size, front/
rear: 8x1.75"/10x1.75". Working width: 56 cm/22".
Working depth: 25.5 mm. Weight: 63 kg.
· Central cutting deck adjustment
· Permanently-lubricated ball
bearings
· Adjustable, ergonomically angled
handle
968 99 91-32
*!3J1I8D-aheacc!
265
· Folding handlebar
· Seedbox (option)
· Flail blades (option)
Lawn Care Accessories
Collector
DT18
540 00 00-61
*!3J1I8D-agiccj!
Seed box
DT18
540 00 00-60
*!3J1I8D-agicdg!
Delta reel blades
DT18
DT18C
540 00 00-72
540 00 00-71
*!3J1I8D-agicfa!
*!3J1I8D-agiced!
Flail Reel
DT22, complete
539 10 71-83
*!3J1I8D-ahecdh!
266
Delta Reel
DT22, complete
539 10 71-84
*!3J1I8D-ahecee!
Spring Tine Reel
DT22, complete
539 10 71-85
*!3J1I8D-ahecfb!
Seeder box
539 10 71-86
*!3J1I8D-ahecgi!
Bagging kit
DT22, complete
539 10 66-67
*!2J1I8D-ahechi!
267
Transmission kit
V1100 (88-)
293 98 25-01
Belts
V1100
293 95 29-01
Blade kit
15 pcs, V1100(88-)
371 92 45-03
Blade
Outer L:291 mm DuoPro (94-)
533 31 97-10
268
Gear-wheel
Gear-wheel Ø31,7 40 Silent
531 00 19-61
Blades
Inner L:78 mm DuoPro
L:75 mm 35-180
L:75 mm K2000El (91-)
533 31 96-61
531 00 20-14
531 00 43-01
269
Technical solutions
for traditional lawn mowers.
For obvious reasons, a lawn mower has to be selected based on specific requirements, since every
lawn is different and the methods for getting good results vary. BioClip requires mowing more often
than mowing with discharge or collection, which can be done less often. However the requirements
shared by all mowers are that the cutting deck is efficient and stable, the handles are comfortable
and the wheels roll over the lawn easily.
Heavy-duty cutting decks of cast aluminium, steel or ABS, make the machines
stable in operation and long lasting.
The robust, cast BioClip cutting deck gives perfect results, even in damp
conditions.
Aluminium wheels with double ball bearings and rubber tyres offer increased
traction and long product life.
TrioClip gives you three cutting systems in the same machine; collection, discharge and BioClip. BioClip means that the grass is cut into small pieces that
quickly decompose and return to the lawn as fertiliser.
All the controls are easy to reach on the convenient comfort handle, and vibrations are reduced thanks to our AntiVib disc.
270
Efficient engines reduce fuel consumption and emissions as well.
Comfort handle with well-grouped
controls. All controls are located
on the handle for better comfort.
The Briggs & Stratton engines with Autostart have a starting system as an
alternative to electric start, where a spring gives the engine a starting rpm
rate of 100 rpm.
Variable drive speed makes it easy
to adjust the speed, depending on
the user's needs and the condition
of the lawn.
Adjustable handlebars with comfort handles provide the right ergonomical
angle for arms and hands, which reduces fatigue.
271
Wheels with double ball bearings
ensure the machine rolls easily,
and without the wheels becoming
loose, even after many years of use.
BBC, Blade Brake Clutch means that
the blades can be stopped without
stopping the engine. A great feature
when you want to cross a gravel
path or empty the bag.
Central cutting height adjustment.
Quick and easy adjustment of grass
cutting height. One lever affects all
four wheels at the same time.
The fold-down handlebar simplifies
storage and transport.
The collectors are very easy
to remove and empty, and have
well-designed carry handles.
Easy, convenient adjustment of
the cutting height through a springassisted one-hand control.
Petrol lawn mowers
W 53CSB
Engine: Kawasaki FJ180. Power: 4.4 kW/6.0 hp. Fuel tank volume: 2.0l.
Self propelled, fixed speed(s): 3.2 - 6.3 km/h. Cutting width: 53 cm.
Cutting height, min-max: 20 - 90 mm. Cutting height steps: 7 steps.
Cutting deck material: aluminium.
· Aluminium cutting deck
· Front-wheel drive
· Three speed transmission
· BBC (Blade Brake Clutch)
· Extra large collector
· BioClip (option)
· Comfort handle with well-grouped
controls
· Rubber tyres
· Cast aluminium wheels
· Three speed transmission
· BioClip (option)
controls
· Rubber tyres
· BioClip
· Spring-loaded central cutting
height adjustment
· Handle height adjustment
· Foldable handle
· Handlebar with Anti-Vibration
System
· Rubber tyres
· Robust wheels with double ball
bearings
W 53CSB
968 99 92-87
*!3J1I8D-bdidfj!
W 53CS
Engine: Kawasaki FJ180. Power: 4.4 kW/6.0 hp. Fuel tank volume: 2.0l.
Self propelled, fixed speed(s): 3.2 - 6.3 km/h. Cutting width: 53 cm.
Cutting height, min-max: 20 - 90 mm. Cutting height steps: 7 steps.
W 53CS
968 99 92-89
*!3J1I8D-bdidhd!
M 53S Pro
Engine: Honda GCV160 OHC. Power: 4.0 kW/5.5 hp.
Fuel tank volume: 1.1l. Self propelled, fixed speed(s): 4.0 km/h.
Cutting width: 53 cm. Cutting height, min-max: 27-64 mm.
Cutting height steps: 5 steps. Cutting deck material: aluminium.
M 53S Pro
953 53 48-01
*!3J1I8D-ahfcjg!
272
M 48 Pro
Engine: Honda GCV160 OHC. Power: 4.0 kW/5.5 hp.
Fuel tank volume: 1.1l. Cutting width: 48 cm. Cutting height, minmax: 27-64 mm. Cutting height steps: 5 steps.
· BioClip
height adjustment
· Foldable handle
· Handlebar with Anti-Vibration
System
· Rubber tyres
bearings
· Drive
· Variable drive speed
· ReadyStart
· TrioClip
controls
· Foldable handle
bearings
· Water cleaning connection
· Drive
· ReadyStart
· TrioClip
controls
· Foldable handle
bearings
M 48 Pro
953 53 46-01
*!3J1I8D-ahfchc!
R 153SV
Engine: Briggs & Stratton. Engine type: DOV 650. Power: 4.8 kW/6.5 hp.
Fuel tank volume: 1.5l. Self propelled, variable speed: 0-5.3 km/h.
Cutting height steps: 6 steps. Cutting deck material: Aluminum.
Wheel size, front/rear: 194 mm/214 mm.
R 153SV (2007-)
965 15 98-02
*!3J1I8D-bfebag!
R 153S
Engine: Briggs & Stratton. Engine type: Quantum XVT 60.
Power: 4.5 kW/6.0 hp. Fuel tank volume: 1.5l. Self propelled, fixed speed
(s): 3.5 km/h. Cutting width: 53 cm. Cutting height, min-max: 3087 mm. Cutting height steps: 6 steps. Cutting deck material: Aluminum.
R 153S (2007-)
965 15 98-01
*!3J1I8D-bfeaja!
273
R 150SV
Power: 4.1 kW/5.5 hp. Fuel tank volume: 1.5l.
Self propelled, variable speed: 0-5.3 km/h. Cutting width: 50 cm.
Cutting height, min-max: 28-75 mm. Cutting height steps: 6 steps.
Cutting deck material: Aluminum. Wheel size, front/
rear: 194 mm/214 mm.
· Drive
· ReadyStart
· TrioClip
controls
· Foldable handle
bearings
· Drive
· ReadyStart
· TrioClip
controls
· Foldable handle
bearings
· Drive
· TrioClip
controls
· Foldable handle
bearings
R 150SV (2007-)
965 15 95-02
*!3J1I8D-bfeafc!
R 150S
(s): 3.5 km/h. Cutting width: 50 cm. Cutting height, min-max: 2875 mm. Cutting height steps: 6 steps. Cutting deck material: Aluminum.
R 150S (2007-)
965 15 95-01
*!3J1I8D-bfeacb!
R 150SVH
Engine: Honda. Engine type: GCV160 OHC. Power: 4.1 kW/5.5 hp.
R 150SVH (2007-)
965 15 96-02
*!3J1I8D-bfeaef!
274
R 150SH
· Drive
· TrioClip
controls
· Foldable handle
bearings
· Steel cutting deck
· Drive
· BBC (Blade Brake Clutch)
· TrioClip
controls
· Foldable handle
· Rubber tyres
bearings
· Drive
· ReadyStart
· TrioClip
controls
· Foldable handle
· Rubber tyres
bearings
R 150SH (2007-)
965 15 96-01
*!3J1I8D-bfeadi!
R 152SVH-BBC
Cutting height steps: 6 steps. Cutting deck material: steel.
R 152SVH-BBC (2007-)
961 41 00-63
*!3J1I8D-bdhbhi!
R 152SV
Engine: Briggs & Stratton. Engine type: DOV 650. Power: 4.8 kW/6.5 hp.
R 152SV (2007-)
961 41 01-34
*!3J1I8D-bfdjcf!
275
R 152SVH
· Drive
· TrioClip
controls
· Foldable handle
· Rubber tyres
bearings
· Drive
· TrioClip
controls
· Foldable handle
· Rubber tyres
bearings
· Pivoting front wheels
· Drive
· TrioClip
controls
· Foldable handle
· Rubber tyres
bearings
R 152SVH (2007-)
961 41 01-33
*!3J1I8D-bfdjbi!
R 152SVH Swivel
R 152SVH Swivel
961 41 00-64
*!3J1I8D-bdhbjc!
R 145SV
Self propelled, variable speed: 0-5 km/h. Cutting width: 44 cm.
Cutting deck material: steel. Wheel size, front/rear: 203 mm/203 mm.
R 145SV (2007-)
961 41 01-31
*!3J1I8D-bfdiii!
276
R 145
Power: 3.7 kW/5.0 hp. Fuel tank volume: 1.1l. Cutting width: 44 cm.
· TrioClip
controls
· Foldable handle
· Rubber tyres
bearings
· Drive
· ReadyStart
· TrioClip
controls
· Foldable handle
bearings
· Drive
· ReadyStart
· TrioClip
controls
· Foldable handle
bearings
R 145 (2007-)
961 31 00-21
*!3J1I8D-bfdihb!
R 151SV
Self propelled, variable speed: 0-5.3 km/h. Cutting width: 50 cm.
R 151SV (2007-)
965 15 97-03
*!3J1I8D-bfeaid!
R 151S
(s): 3.7 km/h. Cutting width: 50 cm. Cutting height, min-max: 2870 mm. Cutting height steps: 6 steps. Cutting deck material: steel.
R 151S (2007-)
965 15 97-01
*!3J1I8D-bfeagj!
277
R 151SH
· Drive
· TrioClip
controls
· Foldable handle
bearings
· Drive
· ReadyStart
· Electric start
· TrioClip
controls
· Foldable handle
bearings
· Drive
· TrioClip
controls
· Foldable handle
bearings
R 151SH (2007-)
965 15 97-02
*!3J1I8D-bfeahg!
R 147SE
Engine: Briggs & Stratton. Engine type: Quantum XVT 60 ES.
R 147SE (2007-)
965 15 94-01
*!3J1I8D-bfeabe!
R 147S
Engine: Briggs & Stratton. Engine type: Sprint XT 45.
R 147S (2007-)
965 15 92-01
*!3J1I8D-bfdjih!
278
R 147
Engine: Briggs & Stratton. Engine type: Sprint XT 45.
· TrioClip
controls
· Foldable handle
bearings
· Drive
· TrioClip
controls
· Foldable handle
· Rubber tyres
bearings
· TrioClip
· Foldable handle
· Rubber tyres
bearings
R 147 (2007-)
965 15 91-01
*!3J1I8D-bfdjgd!
R 52S
R 52S (2007-)
961 41 00-60
*!3J1I8D-bdhbda!
R 53SV
R 53SV (2007-)
961 41 01-35
*!3J1I8D-bfdjdc!
279
R 53
· BioClip
· Foldable handle
· Rubber tyres
· BioClip
height adjustment
· Foldable handle
bearings
· BioClip
height adjustment
· Foldable handle
bearings
R 53 (2007-)
961 31 00-23
*!3J1I8D-bfdjej!
M 53S
Engine: B&S QP XTL 55. Power: 4.0 kW/5.5 hp. Fuel tank volume: 1.5l.
Self propelled, fixed speed(s): 4.0 km/h. Cutting width: 53 cm.
M 53S
953 53 47-01
*!3J1I8D-ahfcij!
M 48
Engine: B&S Q 45. Power: 3.3 kW/4.5 hp. Fuel tank volume: 1.5l.
Cutting height steps: 5 steps. Cutting deck material: aluminium.
M 48
953 53 45-01
*!3J1I8D-ahfcgf!
280
J 55S
· Drive
· BioClip
· Discharge
controls
· Foldable handle
· Rubber tyres
bearings
· Drive
· BioClip
· Discharge
controls
· Foldable handle
· Rubber tyres
bearings
· BioClip
· Discharge
controls
· Foldable handle
· Rubber tyres
bearings
J 55S (2007-)
961 21 00-07
*!3J1I8D-bdhbgb!
M 145SV
Engine: Briggs & Stratton. Engine type: Sprint XQ 40.
Self propelled, variable speed: 0-5 km/h. Cutting width: 44 cm.
M 145SV (2007-)
961 41 01-32
*!3J1I8D-bfdjab!
M 145
Engine: Briggs & Stratton. Engine type: Sprint XQ 40.
M 145 (2007-)
961 31 00-22
*!3J1I8D-bfdijf!
281
Specifications for petrol lawn mowers
W 53 C SB
W 5 3C S
M 5 3S P ro
M 48 Pro
Kawasaki FJ180
Kawasaki FJ180
Honda GCV160 OHC
Honda GCV160 OHC
4.4 kW /6.0 hp
4.4 kW /6.0 hp
4.0 kW /5.5 hp
4.0 kW /5.5 hp
2.0l
2.0l
1.1l
1.1l
3.2 - 6.3 km/h
3.2 - 6.3 km/h
4.0 km/h
53 cm
53 cm
53 cm
48 cm
20 - 90 mm
20 - 90 mm
27-64 mm
27-64 mm
7 steps
7 steps
5 steps
5 steps
aluminium
aluminium
aluminium
aluminium
Aluminium cutting deck
•
•
•
•
Steel cutting deck
–
–
–
–
Drive
–
–
–
–
Front-wheel drive
•
•
•
•
•
–
–
–
Variable drive speed
–
–
–
–
ReadyStart
–
–
–
–
Electric start
–
–
–
–
BBC (Blade Brake Clutch)
•
–
–
–
TrioClip
–
–
–
–
•
(• )
•
(• )
–
–
•
•
Discharge
–
–
–
–
–
–
–
–
Spring-loaded central cutting height adjustment
–
–
•
•
Comfort handle with well-grouped controls
•
•
–
–
•
•
•
•
•
•
•
•
•
•
•
•
Engine
Engine type
Power
Fuel tank volume
Self propelled, fixed speed(s)
Self propelled, variable speed
Cutting width
Cutting height, min-max
Cutting deck material
Wheel size, front/rear
Three speed transmission
Extra large collector
BioClip
Handle height adjustment
–
–
Foldable handle
–
–
Handlebar with Anti-Vibration System
–
–
Rubber tyres
•
•
•
•
Robust wheels with double ball bearings
–
–
Pivoting front wheels
–
–
–
–
Water cleaning connection
–
–
–
–
Cast aluminium wheels
(•) option
282
R 1 53 SV
R 1 53 S
R 1 50 SV
R 1 50 S
R 1 50 SV H
R 1 50 SH
Briggs & Stratton
Briggs & Stratton
Briggs & Stratton
Briggs & Stratton
Honda
Honda
DOV 650
Quantum XVT 60
Quantum XVT 55
Quantum XVT 50
GCV160 OHC
GCV160 OHC
4.8 kW /6.5 hp
4.5 kW /6.0 hp
4.1 kW /5.5 hp
3.7 kW /5.0 hp
4.1 kW /5.5 hp
4.1 kW /5.5 hp
1.5l
1.5l
1.5l
1.5l
1.1l
3.5 km/h
0-5.3 km/h
3.5 km/h
0-5.3 km/h
1.1l
3.5 km/h
0-5.3 km/h
53 cm
53 cm
50 cm
50 cm
50 cm
50 cm
30-87 mm
30-87 mm
28-75 mm
28-75 mm
28-75 mm
28-75 mm
6 steps
6 steps
6 steps
6 steps
6 steps
6 steps
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
194 mm /214 mm
194 mm /214 mm
194 mm /214 mm
194 mm /214 mm
194 mm /214 mm
194 mm /214 mm
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
•
•
–
–
•
–
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
(•) option
283
Engine
R 1 5 2 SV H - B BC
R 1 5 2 SV
R 1 5 2 SV H
R 1 5 2 SV H S w i vel
Honda
Briggs & Stratton
Honda
Honda
Engine type
GCV160 OHC
DOV 650
GCV160 OHC
GCV160 OHC
Power
4.1 kW /5.5 hp
4.8 kW /6.5 hp
4.1 kW /5.5 hp
4.1 kW /5.5 hp
1.1l
1.5l
1.1l
1.1l
0-5.0 km/h
0-5.0 km/h
0-5.0 km/h
0-5.0 km/h
53 cm
53 cm
53 cm
53 cm
32-108 mm
33-108 mm
33-108 mm
31-106 mm
6 steps
6 steps
6 steps
6 steps
steel
steel
steel
steel
Fuel tank volume
Cutting width
230 mm /230 mm
230 mm /230 mm
230 mm /230 mm
210 mm /210 mm
–
–
–
–
Steel cutting deck
•
•
•
•
•
•
•
•
Front-wheel drive
–
–
–
–
–
–
–
–
•
•
–
•
•
•
ReadyStart
–
–
Electric start
–
–
–
–
•
•
–
–
–
•
•
•
–
–
–
–
BioClip
–
–
–
–
Discharge
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
–
–
–
–
Foldable handle
•
•
•
•
–
–
–
–
Rubber tyres
•
•
•
•
–
–
–
–
•
•
•
–
–
–
•
•
–
–
–
Drive
TrioClip
(•) option
284
–
R 1 4 5SV
R 145
R 1 51 SV
R 1 51 S
R 1 51 S H
R 1 47 S E
Briggs & Stratton
Briggs & Stratton
Briggs & Stratton
Briggs & Stratton
Honda
Briggs & Stratton
Quantum XVT 55
Quantum XVT 50
Quantum XVT 55
Quantum XVT 50
GCV135 OHC
Quantum XVT 60 ES
4.1 kW /5.5 hp
3.7 kW /5.0 hp
4.1 kW /5.5 hp
3.7 kW /5.0 hp
3.4 kW /4.5 hp
4.5 kW /6.0 hp
1.5l
1.1l
1.5l
1.5l
0.9l
1.5l
3.7 km/h
3.2 km/h
3.5 km/h
0-5 km/h
0-5.3 km/h
44 cm
44 cm
50 cm
50 cm
50 cm
46 cm
20-91 mm
20-91 mm
28-70 mm
28-70 mm
28-70 mm
30-75 mm
7 steps
7 steps
6 steps
6 steps
6 steps
5 steps
steel
steel
steel
steel
steel
steel
203 mm /203 mm
203 mm /203 mm
194 mm /214 mm
194 mm /214 mm
194 mm /214 mm
194 mm /214 mm
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
•
–
–
–
–
•
•
–
–
•
–
–
–
–
–
–
•
•
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
•
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
•
•
•
•
•
•
–
(•) option
285
Engine
Engine type
Power
Fuel tank volume
R 1 47 S
R 1 47
Briggs & Stratton
Briggs & Stratton
Briggs & Stratton
Honda
Sprint XT 45
Sprint XT 45
Quantum XVT 60
GCV160 OHC
3.4 kW /4.5 hp
3.4 kW /4.5 hp
4.5 kW /6.0 hp
4.1 kW /5.5 hp
0.9l
0.9l
1.5l
1.1l
3.5 km/h
R 5 2S
3.9 km/h
Cutting width
R 53 SV
0-4.2 km/h
46 cm
46 cm
53 cm
53 cm
30-75 mm
30-75 mm
32-95 mm
30-80 mm
5 steps
5 steps
7 steps
6 steps
steel
steel
steel
steel
194 mm /214 mm
194 mm /214 mm
203 mm /230 mm
203 mm /305 mm
–
–
–
–
Steel cutting deck
•
•
•
•
•
•
Drive
–
–
Front-wheel drive
–
–
–
•
–
–
–
–
–
–
–
•
ReadyStart
–
–
–
–
Electric start
–
–
–
–
–
–
–
–
TrioClip
•
•
•
–
–
–
•
•
BioClip
–
–
–
–
Discharge
–
–
–
–
•
•
•
–
–
–
–
–
•
•
•
•
•
•
•
•
•
–
•
–
–
–
–
Rubber tyres
–
–
•
•
–
–
–
–
•
•
•
•
–
–
–
–
•
•
–
–
Foldable handle
(•) option
286
–
R 53
M 53S
M 48
Briggs & Stratton
B&S QP XTL 55
B&S Q 45
Quantum XVT 50
J 55 S
M 1 4 5 SV
M 145
Briggs & Stratton
Briggs & Stratton
Briggs & Stratton
Quantum XVT 55
Sprint XQ 40
Sprint XQ 40
3.7 kW /5.0 hp
4.0 kW /5.5 hp
3.3 kW /4.5 hp
4.1 kW /5.5 hp
3.0 kW /4.0 hp
3.0 kW /4.0 hp
1.5l
1.5l
1.5l
1.5l
0.9l
0.9l
4.0 km/h
4.5 km/h
0-5 km/h
53 cm
53 cm
48 cm
55 cm
44 cm
44 cm
25-70 mm
27-64 mm
27-64 mm
24-101 mm
20-91 mm
20-91 mm
6 steps
5 steps
5 steps
7 steps
7 steps
7 steps
steel
aluminium
aluminium
steel
steel
steel
203 mm /203 mm
203 mm /203 mm
203 mm /203 mm
–
•
•
–
–
–
•
–
–
–
–
•
•
•
•
•
•
–
203 mm /305 mm
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
•
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
–
–
–
–
–
•
•
–
–
–
•
•
•
•
•
•
–
–
–
–
–
–
–
•
•
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
–
–
–
•
–
–
•
•
•
–
–
–
–
–
–
–
•
•
•
•
•
–
–
–
–
–
–
–
–
–
–
•
•
(•) option
287
Manual lawn mowers
540
Cutting width: 40 cm. Cutting height: 12-38 mm.
Cutting height steps: 4. Number of blades: 5. Weight: 9.1 kg.
· Non-friction silent mower
· Pilot handlebar with soft rubber
inlay
· Extra hardened reel blade and
bedknife
· Sturdy wheels
· Blade rotor with sealed ball
bearings
540
964 94 40-01
*!3J1E3J-ibbaac!
64
Cutting height steps: infinite. Number of blades: 5. Weight: 8.7 kg.
· Extra hardened reel blade and bedknife
· Sturdy wheels
· Infinite cutting height adjustment (up to 55 mm)
64
964 95 40-03
*!3J1E3J-ibbeie!
54
Cutting height steps: 4. Number of blades: 5. Weight: 8.6 kg.
· Extra hardened reel blade and bedknife
· Sturdy wheels
54
964 91 40-52
*!3J1E3J-ibabgg!
288
Specifications for manual lawn mowers
54 0
64
54
Cutting width
40 cm
40 cm
40 cm
Cutting height
12-38 mm
12-55 mm
12-38 mm
4
infinite
4
Number of blades
5
5
5
9.1 kg
8.7 kg
8.6 kg
•
•
•
•
–
–
–
–
•
•
•
•
•
–
(• )
Weight
Non-friction silent mower
Pilot handlebar with soft rubber inlay
Extra hardened reel blade and bedknife
Sturdy wheels
Infinite cutting height adjustment (up to 55 mm)
–
Blade rotor with sealed ball bearings
•
–
(• )
(• )
Collector
(•) option
289
–
Lawn mower accessories
Collector
Grass collector for manual lawn mowers.
54/540/64/E5400
964 90 10-01
*!3J1E3J-ibafgc!
290
Robotic mowers
Automower 210 C
Maximum working area capacity: 500 m²/0,12 acres.
Navigation: Irregular. Charging: Manual charging.
Maximum incline inside working area: 35%.
Maximum incline at boundary wire: 10%. Body: ASA-plastic.
Battery type: NiMH. Drive motor type: Brushless DC-motor.
Cutting system: Three razor like blades. Cutting height, min-max: 2060 mm/0,8-2,5". Cutting width: 22 cm/8". Weight: 9,6 kg.
Length: 75 cm. Width: 55 cm. Height: 30 cm.
Automower 210 C, Germany
Automower 210 C, Sweden, Norway, Denmark, Finland
965 14 40-12
965 14 40-01
*!3J1I8D-bffjcj!
· Cutting height adjustment
· External handle
· Lift sensor
· Tilt sensor
*!3J1I8D-bffidh!
Automower 210 C, France
Automower 210 C, Switzerland
965 14 40-13
965 14 40-04
*!3J1I8D-bffjdg!
· Continuous irregular mowing
system
· Automatic mowing
· PIN-code protected
*!3J1I8D-bffifb!
Automower 210 C, Belgium
Automower 210 C, Austria
Automower 210 C, Spain
Automower 210 C, Czech Republic
965 14 40-14
965 14 40-07
965 14 40-09
965 14 40-10
*!3J1I8D-bffjed!
*!3J1I8D-bffihf!
*!3J1I8D-bffijj!
*!3J1I8D-bffjaf!
Automower 210 C, Holland
Automower 210 C, Italy
Automower 210 C, United Kingdom
Automower 210 C, Poland
965 14 40-15
965 14 40-08
965 14 40-03
965 14 40-11
*!3J1I8D-bffjfa!
*!3J1I8D-bffiic!
*!3J1I8D-bffiee!
291
*!3J1I8D-bffjbc!
Automower 220 AC
Area capacity per hour: 75 m². Navigation: Irregular.
Charging: Automatic charging.
Cutting system: Three razor like blades. Cutting height, min-max: 2060 mm/0,8-2,5". Cutting width: 22 cm/8". Weight: 8,6 kg/19 lbs.
Length: 71 cm/28". Width: 55 cm/21,7". Height: 30 cm/11,8".
system
· Automatic mowing
· Automatic charging
· Timer
· Alarm
Automower 220 AC, Germany
965 14 41-12
*!3J1I8D-bfgaej!
Automower 220 AC, Switzerland
965 14 41-04
*!3J1I8D-bffjib!
Automower 220 AC, France
965 14 41-13
*!3J1I8D-bfgagd!
Automower 220 AC, Austria
965 14 41-07
*!3J1I8D-bfgaab!
Automower 220 AC, Belgium
965 14 41-14
*!3J1I8D-bfgaha!
Automower 220 AC, Italy
Automower 220 AC, United Kingdom
965 14 41-08
965 14 41-03
*!3J1I8D-bfgabi!
*!3J1I8D-bffjhe!
Automower 220 AC, Holland
965 14 41-15
*!3J1I8D-bfgaih!
Automower 220 AC, Spain
Automower 220 AC, Czech Republic
965 14 41-09
965 14 41-10
*!3J1I8D-bfgacf!
*!3J1I8D-bfgadc!
Automower 220 AC, Sweden, Norway,
Denmark, Finland
Automower 220 AC, USA
Automower 220 AC, Poland
965 14 41-01
965 14 41-05
965 14 41-11
*!3J1I8D-bffjgh!
*!3J1I8D-bffjji!
*!3J1I8D-bfgafg!
292
· Performance settings panel
· Single guide wire
· Backlit display
· Lift sensor
· Tilt sensor
Automower 230 ACX
Navigation: Irregular. Charging: Automatic charging.
Cutting system: Three razor like blades. Cutting height, min-max: 2060 mm/0,8-2,5". Cutting width: 22 cm/8". Weight: 9,6 kg.
Length: 71 cm. Width: 55 cm. Height: 30 cm.
Automower 230 ACX, Germany
Automower 230 ACX, Sweden, Norway,
Denmark, Finland
965 14 39-12
965 14 39-01
*!3J1I8D-bffhja!
· Performance settings panel
· Dual guide wires
· Higher drive speed
· Extra wheel traction
· Backlit display
· Backlit keypad
· Lift sensor
· Tilt sensor
*!3J1I8D-bffhbe!
Automower 230 ACX, France
Automower 230 ACX, Switzerland
965 14 39-13
965 14 39-04
*!3J1I8D-bffiag!
system
· Automatic mowing
· Automatic charging
· Timer
· Alarm - extra loud
*!3J1I8D-bffhdi!
Automower 230 ACX, Belgium
Automower 230 ACX, Austria
Automower 230 ACX, Spain
Automower 230 ACX, Czech Republic
965 14 39-14
965 14 39-07
965 14 39-09
965 14 39-10
*!3J1I8D-bffibd!
*!3J1I8D-bffhfc!
*!3J1I8D-bffhgj!
*!3J1I8D-bffhhg!
Automower 230 ACX, Holland
Automower 230 ACX, Italy
Automower 230 ACX, United Kingdom
Automower 230 ACX, Poland
965 14 39-15
965 14 39-08
965 14 39-03
965 14 39-11
*!3J1I8D-bffica!
*!3J2J3A-aehijb!
*!3J1I8D-bffhcb!
293
*!3J1I8D-bffhid!
Specifications for robotic mowers
Maximum working area capacity
Auto mower 21 0 C
Auto mowe r 220 AC
Auto mowe r 230
AC X
500 m² /0,12 acres
1800 m² /0,5 acres
3000 m² /0,75 acres
Irregular
Irregular
Irregular
Manual charging
Automatic charging
Automatic charging
Area capacity per hour
Navigation
Charging
75 m²
Maximum incline inside working area
35%
35%
35%
Maximum incline at boundary wire
10%
10%
10%
ASA-plastic
ASA-plastic
ASA-plastic
Body
Battery type
NiMH
NiMH
NiMH
Brushless DC-motor
Brushless DC-motor
Brushless DC-motor
Three razor like blades
20-60 mm /0,8-2,5"
20-60 mm /0,8-2,5"
20-60 mm /0,8-2,5"
22 cm /8"
22 cm /8"
22 cm /8"
Weight
9,6 kg
8,6 kg /19 lbs
9,6 kg
Length
75 cm
71 cm /28"
71 cm
Width
55 cm
55 cm /21,7"
55 cm
Height
30 cm
30 cm /11,8"
30 cm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Drive motor type
Cutting system
Cutting width
Continuous irregular mowing system
Automatic mowing
Automatic charging
–
Timer
–
PIN-code protected
•
Alarm
–
Alarm - extra loud
–
–
Cutting height adjustment
•
Performance settings panel
–
Single guide wire
–
•
•
•
Dual guide wires
–
–
Higher drive speed
–
–
Extra wheel traction
–
–
Backlit display
–
•
Backlit keypad
–
–
External handle
•
•
•
–
–
•
•
•
•
Lift sensor
Tilt sensor
(•) option
294
–
–
•
•
•
•
•
Automower accessories
Cramps
100 pcs., AM (95-)
504 04 97-01
*!3J1I8D-ahdhci!
Cramps
1000 pcs., AM/SM (98-)
100 pcs., AM/SM (95-)
535 09 26-01
535 05 05-01
*!3J1I8D-ahdhdf!
*!3J1I8D-ahdhci!
Loop wire
150 m, AM (03-)
250 m, AM (03-)
501 98 03-02
535 13 17-01
*!3J1I8D-bhbdab!
*!3J1I8D-bebjbf!
250 m, AM (03-)
150 m, AM/SM (95-)
500 m, AM/SM (95-)
501 98 03-01
535 04 16-01
535 09 27-01
*!3J1I8D-bhbdbi!
*!3J1I8D-ahdhae!
295
*!3J1I8D-ahdhbb!
Transformer
EU, 230 ACX (07-)
CH, 230 ACX (07-)
UK, 220 AC, AM G2 (03-)
501 00 44-01
501 00 44-03
535 12 37-02
*!3J1I8D-bhbdgd!
*!3J1I8D-bhbdih!
*!3J1I8D-bhbddc!
UK, 230 ACX (07-)
EU, 220 AC, AM G2 (03-)
CH, 220 AC, AM G2 (03-)
501 00 44-02
535 12 37-01
535 12 37-03
*!3J1I8D-bhbdha!
*!3J1I8D-bhbdcf!
*!3J1I8D-bhbdej!
Transformer cable
230 ACX (07-)
220 AC, AM G2 (03-)
535 12 73-02
535 12 73-01
*!3J1I8D-bhbffe!
*!3J1I8D-bhbdje!
Charging station
EU, Stand-alone battery charger, 210 C (07-)
544 97 74-01
*!3J1I8D-bfhfeb!
UK, Stand-alone battery charger, 210 C (07-)
544 97 74-02
*!3J1I8D-bfhffi!
EU, Incl. transformer, transformer cable, nails and connectors,
220 AC (07-)
EU, Incl. transformer, transformer cable, nails and connectors,
230 ACX (07-)
544 98 07-01
544 97 31-01
*!3J1I8D-bfhfij!
*!3J1I8D-bfgbdb!
UK, Incl. transformer, transformer cable, nails and connectors,
220 AC (07-)
UK, Incl. transformer, transformer cable, nails and connectors,
230 ACX (07-)
544 98 07-02
544 97 31-02
*!3J1I8D-bfhfjg!
*!3J1I8D-bfgbei!
CH, Stand-alone battery charger, 210 C (07-)
CH, Incl. transformer, transformer cable, nails and connectors,
220 AC (07-)
CH, Incl. transformer, transformer cable, nails and connectors,
230 ACX (07-)
544 97 74-03
544 98 07-03
544 97 31-03
*!3J1I8D-bfhfgf!
*!3J1I8D-bfhgac!
296
*!3J1I8D-bfgbff!
Splice kit
AM/SM (95-)
AM/SM (95-)
AM G2 (03-06)
501 98 02-01
535 04 43-01
535 13 37-01
*!3J1I8D-bhbeaa!
*!3J1I8D-ahdhec!
*!3J1I8D-beddga!
Blade kit
9 pcs., Double cutting edge, AM G2 (04-)
30 pcs., Double cutting edge, Alternative steel material, AM G2
535 13 87-01
(04-)
*!3J1I8D-aicbjf!
535 13 88-02
*!3J1I8D-bhbece!
9 pcs., Double cutting edge, Alternative steel material, AM G2
(04-)
9 pcs., Single cutting edge incl. holder, AM/SM (95-00)
535 13 87-02
535 04 88-01
*!3J1I8D-bhbedb!
*!3J1I8D-aeicid!
30 pcs., Double cutting edge, AM G2 (04-)
9 pcs., Single cutting edge, AM/SM (01-03)
30 pcs., Single cutting edge, AM/SM (01-03)
535 13 88-01
535 09 87-01
535 10 64-01
*!3J1I8D-aiccab!
*!3J1I8D-ahdgji!
*!3J1I8D-bhbebh!
Battery
210 C (07-)
AM G1 (98-03)
540 05 96-01
535 09 62-01
*!3J1I8D-bhbehj!
*!3J1I8D-ahbead!
220 AC, 230 ACX, AM G2 (03-)
SM (98-02)
SM (95-97)
535 12 09-01
535 09 61-01
535 08 34-01
*!3J1I8D-bhbegc!
*!3J1I8D-bhbeff!
297
*!3J1I8D-bhbeei!
Battery, generator
SM (95-97)
535 04 06-01
*!3J1I8D-bhbeig!
Battery, generator
SM (01-)
SM (98-00)
535 09 70-01
535 05 85-01
*!3J1I8D-bhbfaj!
*!3J1I8D-bhbejd!
Dealer CD 2007
AM/SM (98-07)
535 14 27-05
*!3J1I8D-bhbfgb!
Service cable
Service cable USB adapter, AM G2 (03-)
Service cable kit, AM G2 (03-06)
Service cable kit, AM/SM G1 (98-03)
544 08 50-01
535 13 24-01
535 10 61-01
*!3J1I8D-bhbfda!
*!3J1I8D-bhbfcd!
298
*!3J1I8D-bhbfbg!
Loop wire interruption tester
AM/SM (95-)
501 00 18-01
*!3J1I8D-bhbfeh!
Soft carrying bag
AM G2 (03-)
505 69 99-91
*!3J1I8D-beeaie!
299
Technical solutions
for cultivators.
A cultivator has to be meticulously developed, in order to be efficient in soft topsoil as well as in
the hardest, driest earths. This means that the machine’s operation, from the engine and transmission
to the actual blades, is built for maximum capacity and durability. At the same time it’s important
to develop the machines’ ergonomics and function so the user can utilise the full capacity of the
machine, without unnecessary effort.
The T25 and T200 Compact Pro have light, quiet 4-stroke engines.
The larger cultivators all have OHV engines.
The T500 RH has a unique pneumatic clutch that ensures good comfort
during use, and good manoeuvrability.
Detachable transmission housing with lubrication nipples simplifies service.
The T200 Compact Pro is fitted
with a powerful wormgear with
triple ball bearings.
Accessories like moss rakes, ploughs, weeding tools, edgers and scarifiers
make the T200 Compact Pro extremely versatile.
Most of the machines have fold-down handlebars. Picture is the T200 Compact
Pro with fold-down handlebar and carry handles.
300
The handle is easy to fold down,
making the machines easy to
transport.
Cultivators
CRT81
Engine: B&S OHV. Power: 6.0 kW/8.0 hp. Fuel tank volume: 3.8l.
Transmission: Chain/Manual. Transmission steps: 1 forward/1 back.
Rotational speed: 299 rpm. Cultivating width: 53 cm/21".
Cultivating depth: 18 cm/7".
· Two gears: one forward, one
reverse
· Counter-rotating tines
· Vertically adjustable handlebar
· Driven wheels
· Chevron tyres
· Adjustable depth bar
reverse
· Counter-rotating tines
· Driven wheels
· Chevron tyres
· Adjustable depth bar
reverse
· Foldable handlebar
· Horisontally adjustable handlebar
· Transport wheel/s
· Drag bar
· Plant guards
· Two-piece transmission and
lubrication nipples for easier
service
· Pneumatic drive
· Reverse gearbox
· Handlebar-mounted gear selection
CRT81
960 91 00-03
*!3J1I8D-bdhajd!
CRT51
Engine: B&S OHV. Power: 3.7 kW/5.0 hp. Fuel tank volume: 2.8l.
Transmission: Chain/Manual. Transmission steps: 1 forward/1 back.
Rotational speed: 190 rpm. Cultivating width: 43 cm/17".
Cultivating depth: 15 cm/6".
CRT51
960 91 00-02
*!3J1I8D-bdhbaj!
T500RH Pneumatic
Engine: Honda GC160 OHC. Power: 3.7 kW/5.0 hp.
Fuel tank volume: 2.1l. Transmission: Chain/Pneumatic.
Transmission steps: 1 forward/1 back. Rotational speed: 120 rpm.
Cultivating width: 85 cm/33". Cultivating depth: 28 cm/11".
T500RH Pneumatic
967 80 50-18
*!3J1I8D-ahgfhg!
301
T50RH
Engine: Honda GC135 OHV. Power: 3.0 kW/4.0 hp.
Fuel tank volume: 1.7l. Transmission: Chain/Manual.
Transmission steps: 1 forward/1 back. Rotational speed: 120 rpm.
reverse
· Drag bar
T50RH
967 80 40-12
*!3J1I8D-ahjbge!
T25
Engine: Honda GXH50 OHV. Power: 1.9 kW/2.5 hp.
Fuel tank volume: 1.2l. Transmission: Chain/Manual.
Transmission steps: 1 forward. Rotational speed: 210 rpm.
· Double carry handles
· Drag bar
T25
967 80 25-17
*!3J1I8D-ahjbhb!
T200 Compact Pro
Engine: Honda GX25 OHC. Power: 0.8 kW/1.1 hp.
Fuel tank volume: 0.55l. Transmission: Manual/Worm gear.
Transmission steps: 1 forward. Rotational speed: 190 rpm.
· Carry handle
· Drag bar
· Transmission with triple ball bearings
T200 Compact Pro (2007-)
965 16 08-01
*!3J1I8D-bffgeg!
302
· Plant guards
· Two-piece transmission and
lubrication nipples for easier
service
· Reverse gearbox
· Handlebar-mounted gear selection
303
Specifications for cultivators
C R T 81
CR T 5 1
Engine
B&S OHV
B&S OHV
Power
6.0 kW /8.0 hp
3.7 kW /5.0 hp
Fuel tank volume
Transmission
Transmission steps
3.8l
2.8l
Chain/Manual
Chain/Manual
1 forward /1 back
1 forward /1 back
Rotational speed
299 rpm
190 rpm
Cultivating width
53 cm /21"
43 cm /17"
Cultivating depth
18 cm /7"
15 cm /6"
•
•
•
•
Foldable handlebar
–
–
Vertically adjustable handlebar
•
•
Horisontally adjustable handlebar
–
–
Carry handle
–
–
Double carry handles
–
–
Transport wheel/s
–
–
Driven wheels
•
•
Drag bar
–
–
Plant guards
–
–
Two-piece transmission and lubrication nipples for easier service
–
–
Transmission with triple ball bearings
–
–
Pneumatic drive
–
–
Chevron tyres
•
•
•
•
Reverse gearbox
–
–
Handlebar-mounted gear selection
–
–
Two gears: one forward, one reverse
Counter-rotating tines
Adjustable depth bar
(•) option
304
T 50 0 R H Pn e u m at i c
T 50 R H
T 25
T 20 0 C o m pa c t P ro
Honda GC160 OHC
Honda GC135 OHV
Honda GXH50 OHV
Honda GX25 OHC
3.7 kW /5.0 hp
3.0 kW /4.0 hp
1.9 kW /2.5 hp
0.8 kW /1.1 hp
2.1l
1.7l
1.2l
0.55l
Chain/Pneumatic
Chain/Manual
Chain/Manual
Manual/Worm gear
1 forward /1 back
1 forward /1 back
1 forward
1 forward
120 rpm
120 rpm
210 rpm
190 rpm
85 cm /33"
60 cm /24"
54 cm /21"
24 cm /10"
28 cm /11"
28 cm /11"
18 cm /7"
15 cm /6"
•
•
–
–
–
–
–
–
•
•
•
•
•
•
•
–
–
–
–
–
–
–
–
•
–
–
–
•
•
•
•
–
–
–
–
•
•
•
•
•
•
•
•
–
–
–
–
–
–
–
•
•
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
–
–
–
–
(•) option
305
–
Cultivator Accessories
Ridger with metal wheels
For T500RH, T50RH
967 99 20-01
*!3J1I8D-ahgfja!
Moss rake
For T25
For T200 Compact Pro
967 99 18-15
967 99 16-15
*!3J1I8D-ahggca!
*!3J1I8D-ahggdh!
Ridger
967 99 16-01
*!3J1I8D-aibadh!
Edger
967 99 16-30
*!3J1I8D-aibaca!
306
Scarifier
967 99 16-25
*!3J1I8D-aibabd!
Rotary weed tools
967 99 16-02
*!3J1I8D-ahggee!
Transport wheels
Double transport wheels for T25
967 99 18-20
*!3J1I8D-ahggbd!
Tine extensions
For T55R, T500RH, T550R
For T25
967 99 20-12
967 99 18-12
*!3J1I8D-aahcia!
*!3J1I8D-ahgfid!
307
Ice auger
225AI15
Maximum recommended engine speed: 11000-12000 rpm.
Fuel tank volume: 0.5l/1 US pint. Gear ratio: 1:22. Vibrations left/
right handle: 7.4 m/s²/6.0 m/s². Sound level, min/max: 97 dB(A)/97 dB
(A). Noise emission, L WA: 102 dB(A).
Dry weight without auger bit: 5.3 kg/11.7 lbs.
Engine part
953 11 01-01
*!3J1I8D-aeaehi!
225AI25
Maximum recommended engine speed: 11000-12000 rpm.
Fuel tank volume: 0.5l/1 US pint. Gear ratio: 1:59. Vibrations left/
right handle: 7.4 m/s²/6.0 m/s². Sound level, min/max: 98 dB(A)/98 dB
(A). Noise emission, L WA: 102 dB(A).
Dry weight without auger bit: 5.8 kg/12.8 lbs.
Engine part
953 11 06-01
*!3J1I8D-aeaeif!
308
Snow throwers
1130STE
Engine: Tecumseh Snow King OHV. Power: 8.2 kW/11.0 hp.
Fuel tank volume: 4.0 l.. Tyre size: 16". Working width: 76 cm/30".
Intake height: 58.5 cm/23".
· Electric start
· Power steering
· Headlight
· Two-stage system
· Feed screw with ball bearings
· Lever-controlled deflector
· Lever-controlled ejector
· Cutter for snow banks
· X-trac, heavy-tread tyres
· Snow chains (option)
· Electric start
· Power steering
· Headlight
· Two-stage system
· Electric start
· Headlight
· Two-stage system
1130STE
961 91 00-04
*!3J1I8D-bdfcbb!
9027STE
9027STE
961 91 00-03
*!3J1I8D-bdfcae!
8024STE
8024STE
961 91 00-02
*!3J1I8D-bdfbji!
309
5524ST
· Headlight
· Two-stage system
5524ST
961 91 00-01
*!3J1I8D-bdfbib!
310
Specifications for snow throwers
1 1 30 S T E
9027S T E
802 4S T E
552 4S T
Engine
Tecumseh Snow King OHV
Power
8.2 kW /11.0 hp
6.7 kW /9.0 hp
6.0 kW /8.0 hp
4.1 kW /5.5 hp
Fuel tank volume
4.0 l.
4.0 l.
4.0 l.
3.5 l.
Tyre size
16"
16"
16"
16"
76 cm /30"
68 cm /27"
61 cm /24"
61 cm /24"
Intake height
58.5 cm /23"
58.5 cm /23"
58.5 cm /23"
58.5 cm /23"
Electric start
•
•
•
•
•
•
•
•
•
•
•
(• )
•
•
•
•
•
•
•
•
•
•
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
–
–
–
Working width
Power steering
Differential lock
Headlight
Two-stage system
Feed screw with ball bearings
Lever-controlled deflector
Lever-controlled ejector
Cutter for snow banks
X-trac, heavy-tread tyres
Snow chains
(•) option
311
–
•
•
•
•
(• )
(• )
(• )
Comfortable and
protective.
Unlike many of our competitors, Husqvarna conducts its own development of protective clothing
and equipment. Taking a holistic perspective, where we look at the user’s actual duties and the
tools that are used, we develop the safety features of these products parallel with their ergonomic
characteristics and their quality.
Our clothing is tested and approved in accordance with the applicable
European standards that shows that the product is certified. The EuroTest
symbol is a complement to the CE mark.
Husqvarna's protective trousers have long fibres that could get caught in the
chain and reduce the chain speed, in case the chain cuts into them.
Quality is often a deciding factor, both for amateurs and professionals.
Therefore every detail of our protective products is characterised by our
focus on quality.
Good tools and equipment should make working in the forest both safer and less strenuous.Therefore it’s not enough for the tool/equipment to simply have the right
function, it should also be easy to use and ergonomically correct. And when it comes to safety, ergonomics, functionality and durability, we do what we’ve always done:
listen to the users first, and develop later.
312
Clothes
Forest jacket
Forest jacket made of a ventilating material with 4-way RipStop stretch.
The material is stretchable in all directions which provides for high
durability and freedom of movement. Perfect for the professional
chainsaw user. The jacket has been reinforced in Aramid material on the
outside of the arms. Four pockets with waterproofed zips to keep out dirt
and rain. Inner pocket for mobile phone. The two upper pockets can also
be opened for extra ventilation. Improved design with easy adjustments in
waist and lower part of the back. New material and construction of cuffs
for better ventilation and longer sleeves for greater freedom of movement.
Open yoke at the back, collar of corduroy and Husqvarna logo on chest.
Recommended washing temperature 40° C.
S
L
544 10 38-46
544 10 38-54
*!3J1I8D-bdfhda!
*!3J1I8D-bdfhfe!
M
XL
XXL
544 10 38-50
544 10 38-58
544 10 38-62
*!3J1I8D-bdfheh!
*!3J1I8D-bdfhgb!
*!3J1I8D-bdfhhi!
Protective trousers 20, model A
Protective waisttrousersmade of aventilating materialwith 4-way RipStop
stretch. The materialis stretchable in all directions which provides forhigh
durability and freedom of movement. Perfect for the professional
chainsaw user. The trousers have been reinforced in Aramid material on
knees and Cordura nylon on the lower front part. Lighter and more
comfortable due to our new saw protection material. Greater ventilation
due to a spacer material in the rearand zipped ventilation openings at back
of legs. The back pockets can also be opened for extra ventilation. Wide
elasticized waist and a raised back. Recommended washing temperature
40° C. EuroTest marking. Meets requirements of EN 381-5, EN 340 class
1, 20 m/s.
S
L
544 10 39-46
544 10 39-54
*!3J1I8D-bdfhif!
*!3J1I8D-bdfiai!
M
XL
XXL
544 10 39-50
544 10 39-58
544 10 39-62
*!3J1I8D-bdfhjc!
*!3J1I8D-bdfibf!
313
*!3J1I8D-bdficc!
Protective trousers 20, model A
Protective trousers in carpenter’s model made of a ventilating material
with 4-way RipStop stretch. The material is stretchable in all directions
which provides for high durability and freedom of movement. Perfect for
the professional chainsaw user. The trousers have been reinforced in
Aramid material on knees and Cordura nylon on the lower front part.
Lighter and more comfortable due to our new saw protection material.
Greater ventilation due to a spacer material in the rear and zipped
ventilation openings at back of legs. The back pockets can also be opened
for extra ventilation. Specially designed bib and back for extra comfort.
The bib has two pockets with zip and one inner pocket fora mobile phone.
The braces can be adjusted and locked for a perfect fit. Recommended
washing temperature 40° C. EuroTest marking. Meets requirements of
EN 381-5, EN 340 class 1, 20 m/s.
S
L
544 10 40-46
544 10 40-54
*!3J1I8D-bdfidj!
*!3J1I8D-bdfifd!
M
XL
XXL
544 10 40-50
544 10 40-58
544 10 40-62
*!3J1I8D-bdfieg!
*!3J1I8D-bdfiga!
*!3J1I8D-bdfihh!
Forest jacket, Pro Light
Forest jacket made of 100 % polyester and Cordura nylon. Four pockets
with zips. The two upper pockets have waterproofed zips to keep out dirt
and rain. Inner pocket for mobile phone. Easy adjustments in waist and
lower part of the back. For increased ability to move, the arms have been
made extra long with an elastic cuff around the wrists. Open yoke, zipper
under the arms and mesh material around the wrists for better ventilation.
Collar in corduroy.
42/44
50/52
58/60
505 63 16-42
505 63 16-50
505 63 16-58
*!3J1I8D-aiacgj!
*!3J1I8D-ahjbjf!
*!3J1I8D-ahjcbi!
46/48
54/56
62/64
505 63 16-46
505 63 16-54
505 63 16-62
*!3J1I8D-ahjbii!
*!3J1I8D-ahjcab!
314
*!3J1I8D-ahjccf!
Protective trousers Pro Light 20, model A
Protective waist trousers made of durable Cordura nylon and 100% Ultra
polyester. Wide elasticized waist and raised back for better freedom of
movement. Three pockets with zips. Approved for industrial washing.
EuroTest marking. Meets requirements of EN 381-5, EN 340 class 1, 20 m/
s.
44
52
505 67 62-44
505 67 62-52
*!3J1I8D-afebaj!
*!3J1I8D-afdjec!
46
54
505 67 62-46
505 67 62-54
*!3J1I8D-afdjbb!
*!3J1I8D-afdjfj!
48
56
60
505 67 62-48
505 67 62-56
505 67 62-60
*!3J1I8D-afdjci!
*!3J1I8D-afdjgg!
*!3J1I8D-afdjia!
50
58
62
505 67 62-50
505 67 62-58
505 67 62-62
*!3J1I8D-afdjdf!
*!3J1I8D-afdjhd!
*!3J1I8D-afdjjh!
Protective trousers Pro Light 20, model A
Protective trousers in carpenter's style made of durable Cordura nylon and
100% Ultrapolyester. The cut of the bib and back provides forcomfortand
freedom of movement. The bib has a pocket with zip and an inner pocket
for mobile phone. The braces can be locked and adjusted for a perfect fit.
Three pockets with zips. Wide and elasticised waist. Approved for
industrial washing. EuroTest marking. Meets requirements of EN 381-5,
EN 340 class 1, 20 m/s.
44
52
505 67 63-44
505 67 63-52
*!3J1I8D-afebbg!
*!3J1I8D-afeaei!
46
54
60
505 67 63-46
505 67 63-54
505 67 63-60
*!3J1I8D-afeabh!
*!3J1I8D-afeaff!
*!3J1I8D-afeaig!
48
56
62
505 67 63-48
505 67 63-56
505 67 63-62
*!3J1I8D-afeace!
*!3J1I8D-afeagc!
*!3J1I8D-ahicjh!
50
58
64
505 67 63-50
505 67 63-58
505 67 63-64
*!3J1I8D-afeadb!
*!3J1I8D-afeahj!
315
*!3J1I8D-ahidad!
Protective trousers Pro Light 20, with 10 cm
shorter legs, model A
Protective trousers in carpenter's style made of durable Cordura nylon and
100% Ultra polyester. The legs are 10 cm shorter than ourregular Pro Light
model. The cut of the bib and back provides for comfort and freedom of
movement. The bib has a pocket with zip and an inner pocket for mobile
phone. The braces can be locked and adjusted for a perfect fit. Three
pockets with zips. Wide and elasticised waist. Approved for industrial
washing. EuroTest marking. Meets requirements of EN 381-5, EN 340
class 1, 20 m/s..
46
54
505 67 63-47
505 67 63-55
*!3J1I8D-aiajce!
*!3J1I8D-ahihfe!
50
58
505 67 63-51
505 67 63-59
*!3J1I8D-ahiheh!
*!3J1I8D-ahihgb!
Forest jacket, Light
Forest jacket made of 80% polyester and 20% cotton. Covered zip, front
pocket with zip and inner pocket for a mobile phone. Extended back and
elasticised waist. High collar.
46/48 (S)
54/56 (L)
505 61 82-46
505 61 82-54
*!3J1I8D-afdigh!
*!3J1I8D-afdiib!
50/52 (M)
58/60 (XL)
505 61 82-50
505 61 82-58
*!3J1I8D-afdihe!
*!3J1I8D-afdiji!
316
Protective trousers Light 20, model A
Protective waist trousers made of 100% polyester. Two front pockets and
one back pocket with zip. EuroTest marking. Meets requirements of EN
381-5, EN 340 class 1, 20m/s.
44
52
505 67 20-44
505 67 20-52
*!3J1I8D-acgjfd!
*!3J1I8D-acihae!
46
54
505 67 20-46
505 67 20-54
*!3J1I8D-aciggh!
*!3J1I8D-acihbb!
48
56
60
505 67 20-48
505 67 20-56
505 67 20-60
*!3J1I8D-acigib!
*!3J1I8D-acihci!
*!3J1I8D-acihec!
50
58
62
505 67 20-50
505 67 20-58
505 67 20-62
*!3J1I8D-acigji!
*!3J1I8D-acihdf!
*!3J1I8D-ahicia!
Protective trousers Light 20, model A, with 10
cm longer legs
Protective waist trousers made of 100% polyester. The legs have been made
10 cm longer than on our regular Light model. Two front pockets and one
back pocket with zip. EuroTest marking. Meets requirements of EN 381-5,
EN 340 class 1, 20m/s.
46
52
505 67 20-47
505 67 20-53
*!3J1I8D-ahfbgg!
*!3J1I8D-ahfbjh!
48
54
58
505 67 20-49
505 67 20-55
505 67 20-59
*!3J1I8D-ahfbhd!
*!3J1I8D-ahfcad!
*!3J1I8D-ahfcch!
50
56
60
505 67 20-51
505 67 20-57
505 67 20-61
*!3J1I8D-ahfbia!
*!3J1I8D-ahfcba!
317
*!3J1I8D-ahfcde!
Protective trousers, Light 20, model A
Protective trousers in carpenter’s model made of 100% polyester. With a
bib and wide elastic braces with strong clips. Two front pockets and one
back pocket with zip. EuroTest marking. Meets requirements of EN 381-5,
EN 340 class 1.
44
52
505 67 24-44
505 67 24-52
*!3J1I8D-acijdd!
*!3J1I8D-acijhb!
46
54
505 67 24-46
505 67 24-54
*!3J1I8D-acijea!
*!3J1I8D-acijii!
48
56
60
505 67 24-48
505 67 24-56
505 67 24-60
*!3J1I8D-acijfh!
*!3J1I8D-acijjf!
*!3J1I8D-acjabf!
50
58
62
505 67 24-50
505 67 24-58
505 67 24-62
*!3J1I8D-acijge!
*!3J1I8D-acjaai!
Chaps Light 20, with saw protection
One size, easy to adjust to height and waist size. Excellent protection for
the occasional chain saw user. Made of 100% polyester. Elastic ankle tie.
EuroTest marking. Meets requirements of EN 381-5, EN 340 class 1, 20 m/
s.
Chaps
505 63 26-09
*!3J1I8D-aaigja!
Jacket with saw protection, Arbor 20
Comfortable jacket with saw protection especially developed forarborists.
The upper part of the jacket is made of 100% ultra polyester. Lower part in
80% polyester and 20% cotton. A full-length zipper in front, two front
pockets, adjustable waist and extended back. EuroTest marking. Meets
requirements of EN 381-10, -11, EN 340 class 1, 20 m/s.
46/48
54/56
505 64 04-46
505 64 04-54
*!3J1I8D-ahjcha!
*!3J1I8D-ahjcje!
50/52
58/60
505 64 04-50
505 64 04-58
*!3J1I8D-ahjcih!
*!3J1I8D-ahjdaa!
318
*!3J1I8D-ahidba!
Protective trousers, Light 20, model C
Protective trousers with all-round leg protection. Made of 100% polyester.
Two front pockets andone back pocket with zip. EuroTest marking. Meets
requirements of EN 381-5, EN 340 class 1, 20 m/s.
46/48 (S)
54/56 (L)
505 67 35-46
505 67 35-54
*!3J1I8D-acigfa!
*!3J1I8D-adehdg!
50/52 (M)
58/60 (XL)
505 67 35-50
505 67 35-58
*!3J1I8D-adehcj!
*!3J1I8D-adehed!
Protective trousers, Basic 20, model A
Simpler trousers made of 100% knitted polyester, which provides good
ventilation. Two front pockets and elastic waist. Meets requirements of
EN 381-5, EN 340 class 1, 20 m/s.
46
52
505 67 26-46
505 67 26-52
*!3J1I8D-ahijbe!
*!3J1I8D-ahijef!
48
54
58
505 67 26-48
505 67 26-54
505 67 26-58
*!3J1I8D-ahijcb!
*!3J1I8D-ahijfc!
*!3J1I8D-ahijhg!
50
56
60
505 67 26-50
505 67 26-56
505 67 26-60
*!3J1I8D-ahijdi!
*!3J1I8D-ahijfc!
Protective vest
Vest in fluorescent orange and yellow. 50 mm wide reflective tape. 100%
polyester. Meets requirements of EN 471 class 3.
L
XXL
505 62 31-52
505 62 31-60
*!3J1I8D-aebgdf!
*!3J1I8D-adjaja!
319
*!3J1I8D-ahijid!
High visibility protective trousers, model A
Protective trousers in fluorescent orange, carpenter’s model. Made of 70%
polyester and 30% cotton. Two front pockets and a back pocket with zip.
Two reflective strips around each leg. Tested and approved high visibility
garment as per EN 471 class 2. Class 3 when worn with protective vest.
EuroTest marking. Meets requirements of 381-5 and EN 340 class 1, 20 m/
s.
46/48 (S)
54/56 (L)
505 62 32-46
505 62 32-54
*!3J1I8D-adedif!
*!3J1I8D-adfjff!
50/52 (M)
58/60 (XL)
62/64 (XXL)
505 62 32-50
505 62 32-58
505 62 32-62
*!3J1I8D-adfjei!
*!3J1I8D-adfjgc!
*!3J1I8D-agceih!
Work jacket for trimming and brushcutting
A waist jacket specially designed for clearing and garden work. Fitted with
mesh lining on the inside for better ventilation. Four front pockets,
designed not to be in the way of the harness, mobile phone pocket on left
sleeve. Pockets on the insides of the shoulders, into which thermoplastic
protection can be inserted. This is to protect the shoulders during
extended periods of clearing and brushcutting work. Full-length front zip,
high collar, cuffs with press studs. The material is Taslan-treated Oxford
cloth.
46/48 (S)
54/56 (L)
505 62 40-46
505 62 40-54
*!3J1I8D-agjjcj!
*!3J1I8D-agjjed!
50/52 (M)
58/60 (XL)
62/64 (XXL)
505 62 40-50
505 62 40-58
505 62 40-62
*!3J1I8D-agjjdg!
*!3J1I8D-agjjfa!
320
*!3J1I8D-agjjgh!
Work trousers for trimming and brushcutting
For trimming and garden work. Fitted with mesh lining onthe inside and a
zip at the back for better ventilation. Pocket for extra thermoplastic hip
and knee pads for work with a clearing harness and when working on
knees. Outer material up to knees in hardwearing Cordura nylon. On the
inside, up to the knees, there is extra padding for protection against
cuttings and flying stones, two front and back pockets. Leg pocket with
flap. The material is Taslan-treated Oxford cloth.
46
52
505 62 41-46
505 62 41-52
*!3J1I8D-agjjib!
*!3J1I8D-ahaabh!
48
54
58
505 62 41-48
505 62 41-54
505 62 41-58
*!3J1I8D-agjjji!
*!3J1I8D-ahaace!
*!3J1I8D-ahaaei!
50
56
60
505 62 41-50
505 62 41-56
505 62 41-60
*!3J1I8D-ahaaaa!
*!3J1I8D-ahaadb!
Knee pad
Knee pads in foam plastic to be used with the work trousers for trimming
and brushcutting. In pairs, one size.
505 62 26-99
*!3J1I8D-aefeci!
Rain jacket
Rain jacket made of strong nylon and a yoke of PU/PVC. Mesh material
under the yoke that will provide for good ventilation. A well-protected
breast pocket with zip under the yoke. Welded seams. The jacket has extra
long sleeves with press studs and an extended back with rain lip. Corduroy
collar with Velcro closure and along zipprotected bya flap with press studs
at the front. Meets requirements of EN 343.
46/48 (S)
54/56 (L)
505 63 08-46
505 63 08-54
*!3J1I8D-aaihjj!
*!3J1I8D-aaiibc!
50/52 (M)
58/60 (XL)
505 63 08-50
505 63 08-58
*!3J1I8D-aaiiaf!
*!3J1I8D-aaiicj!
321
*!3J1I8D-ahaaff!
Rain jacket, Garden Pro
Rain jacket designed for garden professionals. Made of PU/PVC. Open in
the waist with gusset and press studs so that the jacket can be lifted over the
seat when using a Rider or a tractor. Long model that protects the legs.
Three front pockets with closures. Roomy hood, even while wearing
hearing protection. Meets requirements of EN 343.
50 (M)
54 (L)
58 (XL)
505 63 11-50
505 63 11-54
505 63 11-58
*!3J1I8D-afddbh!
*!3J1I8D-afddce!
Back protector with sleeves
Rain jacket in a stylish model made of PU/PVC. Adjustable buttoning at
the front and extralong arms with press studs. Extended back with rain lip.
One size. Meets requirements of EN 343.
505 63 16-10
*!3J1I8D-aaiihe!
Rain trousers
Rain trousers made of strong nylon on the front and PU/PVC at the back.
10 cm mesh material around the waist for good ventilation. Elastic waist
with drawstring for better comfort. Zipper at the outside lower part of the
leg for easier “on-off”. Meets requirements of EN 343.
46/48 (S)
54/56 (L)
505 63 09-46
505 63 09-54
*!3J1I8D-aaiidg!
*!3J1I8D-aaiifa!
50/52 (M)
58/60 (XL)
505 63 09-50
505 63 09-58
*!3J1I8D-aaiied!
*!3J1I8D-aaiigh!
322
*!3J1I8D-afdddb!
Clearing trousers
Rain trousers in carpenter’s model made of strong nylon on the front and
PU/PVC at the back. Adjustable, elastic braces and buttoning at waist.
Raised back and bib. One size. Meets requirements of EN 343.
505 63 36-10
*!3J1I8D-aaiiji!
Chaps
Rain chaps designed to attach to waist belt or tool belt. Adjustable
buttoning gives choice of three lengths. Made of PU/PVC. One size. Meets
requirements of EN 343.
505 63 26-10
*!3J1I8D-aaiiib!
All-weather jacket, Typhoon
All-weather jacket made of an effective water-repellent and ventilated
material. Mesh lining in the entire jacket. Two breast pockets with zip.
Adjustable elastic in the waist and back. Taped seams and cuffs with zip
and gusset. Meets requirements of EN 343.
46/48 (S)
54/56 (L)
505 61 95-46
505 61 95-54
*!3J1I8D-adbeid!
*!3J1I8D-adbfag!
50/52 (M)
58/60 (XL)
62/64 (XXL)
505 61 95-50
505 61 95-58
505 61 95-62
*!3J1I8D-adbeja!
*!3J1I8D-adbfbd!
323
*!3J1I8D-afgjbc!
All-weather trousers, Typhoon
All-weather trousers made of an effective water-repellent and ventilated
material. Mesh lining inthe entire trousers. Two vents at side. Elastic waist,
with fly and waist cord. Meets requirements of EN 343 class 3.
46/48 (S)
54/56 (L)
504 98 60-46
504 98 60-54
*!3J2J3A-aajfjc!
*!3J2J3A-aajgbf!
50/52 (M)
58/60 (XL)
504 98 60-50
504 98 60-58
*!3J2J3A-aajgai!
*!3J2J3A-aajgcc!
Work shirt
A soft and comfortable shirt with good range of motion, equally good for
work or leisure. 100% pre-shrunk cotton.
37/38 (S)
41/42 (L)
544 14 06-37
544 14 06-41
*!3J1I8D-bdgjbb!
*!3J1I8D-bdgjdf!
39/40 (M)
43/44 (XL)
45/46 (XXL)
544 14 06-39
544 14 06-43
544 14 06-45
*!3J1I8D-bdgjci!
*!3J1I8D-bdgjec!
Fleece jacket
A practical and versatile fleece jacket made of high quality micro fleece.
The membrane on the inside protects against wind and water. It has a fulllength zip, front pockets with zip, adjustable elastic at the bottom and
Husqvarna embroider. Inner pocket with zipper and with a special inner
pocket for your mobile phone. The jacket is reinforced over shoulders and
arms in Cordura nylon and has pre-curved arms for improved movement.
Fleece is alight materialthat keeps in heatand traps moisture, but the fibres
do not absorb water.
S
L
505 61 70-46
505 61 70-54
*!3J1I8D-ahjiji!
*!3J1I8D-ahjjbb!
M
XL
505 61 70-50
505 61 70-58
*!3J1I8D-ahjjae!
*!3J1I8D-ahjjci!
324
*!3J1I8D-bdgjfj!
Thermal vest
Thermal vest made of 100% water repellent polyester. Two front pockets
and two breast pockets with zippers. Adjustable, elastic waist and bottom
of the back. Reflex strap over chest.
50 (M)
58 (XL)
505 61 20-50
505 61 20-58
*!3J1I8D-afddgc!
*!3J1I8D-afddig!
54 (L)
62 (XXL)
505 61 20-54
505 61 20-62
*!3J1I8D-afddhj!
*!3J1I8D-afgcea!
One layer underwear, shirt
Made of 100% polyester which provides for good ventilation and allows
the material to dry quickly. Effectively moves moisture to the outside of
the garment.
S (46/48)
L (54/56)
544 96 41-46
544 96 41-54
*!3J1I8D-bfeijc!
*!3J1I8D-bfejbf!
M (50/52)
XL (58/60)
544 96 41-50
544 96 41-58
*!3J1I8D-bfejai!
*!3J1I8D-bfejcc!
One layer underwear, trousers
Made of 100% polyester which provides for good ventilation and allows
the material to dry quickly. Effectively moves moisture to the outside of
the garment.
S (46/48)
L (54/56)
544 96 42-46
544 96 42-54
*!3J1I8D-bfejdj!
*!3J1I8D-bfejfd!
M (50/52)
XL (58/60)
544 96 42-50
544 96 42-58
*!3J1I8D-bfejeg!
*!3J1I8D-bfejga!
325
Double-layer underwear, shirt
Underwear with inner layer of knit polyester and outer layer of spun
polyester. The material provides good ventilation and dries rapidly. The
shirt has a medium high neck and zip.
46/48 (S)
54/56 (L)
505 61 35-46
505 61 35-54
*!3J1I8D-aefgdd!
*!3J1I8D-aefgge!
50/52 (M)
58/60 (XL)
505 61 35-50
505 61 35-58
*!3J1I8D-aefgfh!
*!3J1I8D-aefghb!
Double-layer underwear, trousers
Underwear with inner layer of knit polyester and outer layer of spun
polyester. The material provides good ventilation and dries rapidly.
46/48 (S)
54/56 (L)
505 61 36-46
505 61 36-54
*!3J1I8D-aefhcf!
*!3J1I8D-aefhej!
50/52 (M)
58/60 (XL)
505 61 36-50
505 61 36-58
*!3J1I8D-aefhdc!
*!3J1I8D-aefhfg!
Husqvarna braces
With strong metal clips. Extra wide. Adjustable length.
505 61 85-00
*!3J1I8D-aaebdf!
326
Husqvarna braces
With leather eye straps. Extra wide. Adjustable length.
505 61 85-10
*!3J1I8D-aaebec!
Snow straps
Practical snow straps to keep out snow and dirt.
505 69 06-00
*!3J1I8D-aaiaij!
Bag
Spacious bag made of strong Cordura nylon. Strong zipper at top and
plywood bottom. The bag has a wide, strong carrying strap and two
adjustable straps on the top for better adjustment. One large side pocket.
75 litres.
505 69 99-62
*!3J1I8D-ahjcej!
Back pack
Back pack made of ripstop nylon. Three outside pockets and rain
protection that can be folded out from underneath and over the whole
back pack. 29 litres.
505 69 99-94
*!3J1I8D-aiabie!
327
Chainsaw bag
A practical bag made of Cordura for your chainsaw.
505 69 00-95
*!3J1I8D-agceha!
Chainsaw box
Tough, handy carrying case designed to carry a chainsaw, lubricants and
other accessories.
531 30 08-72
*!3J1I8D-bdjibd!
Husqvarna Active Cleaning
Protective clothing must be washed regularly to retain its protective
qualities. Our special detergent is phosphate free and biodegradable, and
has been classified as environmentally compatible. Also effective for
cleaning chain saws, garden mashines, air filters, etc.
505 69 85-70
*!3J1I8D-achiag!
Mannequin Male
Full sized (185 cm) male mannequin made of fiber glass. Hands made of
PVC. The upper and lower part of body can be seperated for easy dressing.
A smart foot stand that is attached to the calf helps the mannequine to
stand up.
505 66 52-80
*!3J1I8D-aiabie!
328
Mannequin Female
Full sized (178 cm) female mannequin made of fiber glass. Hands made of
PVC. The upper and lower part of body can be seperated for easy dressing.
A smart foot stand that is attached to the calf helps the mannequine to
stand up.
505 66 52-81
*!3J1I8D-aiabie!
329
Boots
Protective boots 28
Professional protective boot with many technical materials for high
comfort and durability. The saw protection reaches all the way back on the
inside of the heel which protects the inside of the foot when limbing.
Reinforced over the steel toe cap and around the sole to withstand better
from wear and tear. The boot has a lining of Outlast material which
balances the temperature - keeping you cool when you are hot and warm
when you are cold. Meets requirements of EN 345 SB E, EN 381-3 class 3,
28 m/s.
36
39
42
544 10 41-36
544 10 41-39
544 10 41-42
*!3J1I8D-bdfiie!
*!3J1I8D-bdfjbe!
*!3J1I8D-bdfjef!
37
40
43
544 10 41-37
544 10 41-40
544 10 41-43
*!3J1I8D-bdfijb!
*!3J1I8D-bdfjcb!
*!3J1I8D-bdfjfc!
38
41
44
544 10 41-38
544 10 41-41
544 10 41-44
*!3J1I8D-bdfjah!
*!3J1I8D-bdfjdi!
*!3J1I8D-bdfjgj!
Protective boots, Light 24
Weight 2.5 kg/pair. With reinforced toe-cap and approved saw protection.
Roomy fit. Non-slip sole, prepared for studs. Ankle protection. Ridge on
the heel makes it easier to remove boot. Meets requirements of EN 345 SB
E, EN 381-3 class 2, 24 m/s.
37
41
505 67 39-37
505 67 39-41
*!3J1I8D-ahefde!
*!3J1I8D-ahacga!
38
42
45
505 67 39-38
505 67 39-42
505 67 39-45
*!3J1I8D-ahefeb!
*!3J1I8D-ahachh!
*!3J1I8D-ahadah!
39
43
46
505 67 39-39
505 67 39-43
505 67 39-46
*!3J1I8D-aheffi!
*!3J1I8D-ahacie!
*!3J1I8D-ahadbe!
40
44
47
505 67 39-40
505 67 39-44
505 67 39-47
*!3J1I8D-ahacfd!
*!3J1I8D-ahacjb!
330
*!3J1I8D-ahadcb!
Protective boots, Light 28
Handmade boot with approved saw protection. Extra reinforced upper
with toe-cap and reinforcement around the sole. Deep lacing at the back
and ridges on the leg, plus a new heel cap make it easier to put on and take
off the boot. Cotton lining. Sole can be fitted with studs. Meets
requirements of EN 345 SB E, 381-3 class 3, 28 m/s.
37
42
505 67 34-37
505 67 34-42
*!3J1I8D-ahabbg!
*!3J1I8D-ahabgb!
38
43
47
505 67 34-38
505 67 34-43
505 67 34-47
*!3J1I8D-ahabcd!
*!3J1I8D-ahabhi!
*!3J1I8D-ahacbf!
39
44
48
505 67 34-39
505 67 34-44
505 67 34-48
*!3J1I8D-ahabda!
*!3J1I8D-ahabif!
*!3J1I8D-ahaccc!
40
45
49
505 67 34-40
505 67 34-45
505 67 34-49
*!3J1I8D-ahabeh!
*!3J1I8D-ahabjc!
*!3J1I8D-ahacdj!
41
46
50
505 67 34-41
505 67 34-46
505 67 34-50
*!3J1I8D-ahabfe!
*!3J1I8D-ahacai!
*!3J1I8D-ahaceg!
Protective boot for power cutting
Protective boots for power cutting. With reinforced toe-cap and approved
fire resistant rubber. Roomy fit. Non-slip sole, prepared for studs. Ankle
protection. Ridge on the heel makes it easier to remove boot. Meets
requirements of EN 345 SB E.
36
40
44
544 96 53-36
544 96 53-40
544 96 53-44
*!3J1I8D-bffdbi!
*!3J1I8D-bffdfg!
*!3J1I8D-bffdje!
37
41
45
544 96 53-37
544 96 53-41
544 96 53-45
*!3J1I8D-bffdcf!
*!3J1I8D-bffdgd!
*!3J1I8D-bffeaa!
38
42
46
544 96 53-38
544 96 53-42
544 96 53-46
*!3J1I8D-bffddc!
*!3J1I8D-bffdha!
*!3J1I8D-bffebh!
39
43
47
544 96 53-39
544 96 53-43
544 96 53-47
*!3J1I8D-bffdej!
*!3J1I8D-bffdih!
331
*!3J1I8D-bffece!
Leisure/Hunting boots
High quality. The sole has the same tread as the protective boots and is
prepared for studs. Durable lining. Long lacing at the back ensures a good
fit.
36
40
44
505 65 47-36
505 65 47-40
505 65 47-44
*!3J1I8D-aecgfg!
*!3J1I8D-aaieif!
*!3J1I8D-aaifcc!
37
41
45
505 65 47-37
505 65 47-41
505 65 47-45
*!3J1I8D-aaiefe!
*!3J1I8D-aaiejc!
*!3J1I8D-aaifdj!
38
42
46
505 65 47-38
505 65 47-42
505 65 47-46
*!3J1I8D-aaiegb!
*!3J1I8D-aaifai!
*!3J1I8D-aaifeg!
39
43
47
505 65 47-39
505 65 47-43
505 65 47-47
*!3J1I8D-aaiehi!
*!3J1I8D-aaifbf!
*!3J1I8D-aaiffd!
Husqvarna leather boots
Leather boots in high quality leather and Vibram ™ sole. Based on the
knowledge from forestry workers high demand on quality and comfort
these boots have been designed and made to fit demanding consumers
needs. High quality treated leather and seams of heavy-duty threads for
significant strength. Inside of waterproof soft Porelle® lining for high
comfort. Reinforced materialover toe and heel. Hooks and eyelets for easy
adjustment. Sole of medium stiffness and good grip. This boot has no steel
toe cap or saw protection which makes it perfect to wear when for example
going hiking or fishing.
36
40
505 64 01-36
505 64 01-40
*!3J1I8D-aidchh!
*!3J1I8D-aiddbe!
37
41
505 64 01-37
505 64 01-41
*!3J1I8D-aidcie!
*!3J1I8D-aiddcb!
38
42
44
505 64 01-38
505 64 01-42
505 64 01-44
*!3J1I8D-aidcjb!
*!3J1I8D-aidddi!
*!3J1I8D-aiddfc!
39
43
45
505 64 01-39
505 64 01-43
505 64 01-45
*!3J1I8D-aiddah!
*!3J1I8D-aiddef!
332
*!3J1I8D-aiddgj!
Husqvarna leather boots with steel toe cap
these boots have been designed and made to fit perfect in your daily work.
High quality treated leather and seams of heavy-duty threads for
adjustment. Sole of medium stiffness and good grip. This boot has a steel
toe cap and is approved according to standards for toe protection and
water permeability. Meets requirements of EN ISO 20345 SB/WRU.
36
40
544 21 19-36
544 21 19-40
*!3J1I8D-bdjajh!
*!3J1I8D-bdjbde!
37
41
544 21 19-37
544 21 19-41
*!3J1I8D-bdjbad!
*!3J1I8D-bdjbeb!
38
42
44
544 21 19-38
544 21 19-42
544 21 19-44
*!3J1I8D-bdjbba!
*!3J1I8D-bdjbfi!
*!3J1I8D-bdjbhc!
39
43
45
544 21 19-39
544 21 19-43
544 21 19-45
*!3J1I8D-bdjbch!
*!3J1I8D-bdjbgf!
333
*!3J1I8D-bdjbij!
Husqvarna leather boots with saw protection
and steel toe cap
these boots have been designed and made to fit perfect in your daily work.
High quality treated leather and seams of heavy-duty threads for
adjustment. Sole of medium stiffness and good grip. This boot has saw
protection and asteeltoe cap. Meets requirements of EN 345-2 S2, EN 3813 class 1, 20 m/s.
36
40
544 96 47-36
544 96 47-40
*!3J1I8D-bffaae!
*!3J1I8D-bffaec!
37
41
544 96 47-37
544 96 47-41
*!3J1I8D-bffabb!
*!3J1I8D-bffafj!
38
42
44
544 96 47-38
544 96 47-42
544 96 47-44
*!3J1I8D-bffaci!
*!3J1I8D-bffagg!
*!3J1I8D-bffaia!
39
43
45
544 96 47-39
544 96 47-43
544 96 47-45
*!3J1I8D-bffadf!
*!3J1I8D-bffahd!
*!3J1I8D-bffajh!
Leather boots with saw protection, Light 20
Leather boot with good stability and fit. Made of polyurethane treated
leather. Seams of heavy-duty Kevlar thread for significantly increased
strength. Top with clasps. Durable and waterproof polyurethane sole
extends up to the upper part of the shoe. Hooks for stronger and easier
adjustments. The hooks are placed wide apart, which provides for a better
fit. Inner sole of shock-absorbent Ergothan prevents stress injuries. Meets
requirements of EN 345-2, S2, EN 381-3 class 1, 20 m/s.
39
42
45
505 65 31-39
505 65 31-42
505 65 31-45
*!3J1I8D-aebhij!
*!3J1I8D-aebibj!
*!3J1I8D-aebiea!
40
43
46
505 65 31-40
505 65 31-43
505 65 31-46
*!3J1I8D-aebhjg!
*!3J1I8D-aebicg!
*!3J1I8D-aebifh!
41
44
47
505 65 31-41
505 65 31-44
505 65 31-47
*!3J1I8D-aebiac!
*!3J1I8D-aebidd!
334
*!3J1I8D-aebige!
Garden shoes
All-round garden footwear. The Cordura nylon upper repels water and
grass stains, sides of polyure-thane treated leather. Oil-resistant
polyurethane sole. Inner sole of shock-absorbent Ergothan prevents stress
injuries. Meets requirements of EN 345 S1.
37
41
505 65 39-37
505 65 39-41
*!3J1I8D-aebjbi!
*!3J1I8D-aebjfg!
38
42
45
505 65 39-38
505 65 39-42
505 65 39-45
*!3J1I8D-aebjcf!
*!3J1I8D-aebjgd!
*!3J1I8D-aebjje!
39
43
46
505 65 39-39
505 65 39-43
505 65 39-46
*!3J1I8D-aebjdc!
*!3J1I8D-aebjha!
*!3J1I8D-aecaah!
40
44
47
505 65 39-40
505 65 39-44
505 65 39-47
*!3J1I8D-aebjej!
*!3J1I8D-aebjih!
Studs
Including studs key. Pack of 35.
35/pack
505 65 43-61
*!3J1I8D-aajbcd!
Inner socks
Absorb and wick away moisture. 42% acrylic, 8% lycra, 30% polyamide
and 20% wool.
37-39
43-45
505 61 60-37
505 61 60-43
*!3J1I8D-aeedfd!
*!3J1I8D-aeedjb!
40-42
46-48
505 61 60-40
505 61 60-46
*!3J1I8D-aeedie!
*!3J1I8D-aeeeah!
335
*!3J1I8D-aecabe!
Enter socks
Warm and absorbent. Thicker model with woollen felt sole and built-in
elastic for a superior fit. 42% acrylic, 8% lycra, 30% polyamide and 20%
wool.
37-39
43-45
505 61 61-37
505 61 61-43
*!3J1I8D-aeeebe!
*!3J1I8D-aeeedi!
40-42
46-48
505 61 61-40
505 61 61-46
*!3J1I8D-aeeecb!
*!3J1I8D-aeeeef!
Felt socks
High heat insulation and absorption. 70% wool and 30% polyamide.
37-39
43-45
505 61 62-37
505 61 62-43
*!3J1I8D-aeeefc!
*!3J1I8D-aeeehg!
40-42
46-48
505 61 62-40
505 61 62-46
*!3J1I8D-aeeegj!
*!3J1I8D-aeeeid!
Husqvarna Sock
Tufted inside.
42
45
505 61 52-42
505 61 52-45
*!3J1I8D-aahggc!
*!3J1I8D-aahghj!
336
Outlast sock
Comfortable socks in Outlast material which keeps you cool when it’s
warm and warm when it’s cool.
37-39
43-45
544 14 35-37
544 14 35-43
*!3J1I8D-bdhaei!
*!3J1I8D-bdhagc!
40-42
46-48
544 14 35-40
544 14 35-46
*!3J1I8D-bdhaff!
*!3J1I8D-bdhahj!
Fibre pile socks with leather soles
Socks that stay in place even inside Wellington boots! Woven PVC heel
and ankle. Chrome-tanned leather sole that breathes and gives good grip.
Machine washable at 40°C.
38
42
505 65 46-38
505 65 46-42
*!3J1I8D-aajagc!
*!3J1I8D-aajaig!
40
44
46
505 65 46-40
505 65 46-44
505 65 46-46
*!3J1I8D-aajahj!
*!3J1I8D-aajajd!
337
*!3J1I8D-aajbaj!
Fibre pile insoles
Hard-wearing insoles. Machine washable at 40°C.
37
41
45
505 65 45-67
505 65 45-71
505 65 45-75
*!3J1I8D-aaijci!
*!3J1I8D-aaijgg!
*!3J1I8D-aajace!
38
42
46
505 65 45-68
505 65 45-72
505 65 45-76
*!3J1I8D-aaijdf!
*!3J1I8D-aaijjh!
*!3J1I8D-aajadb!
39
43
47
505 65 45-69
505 65 45-73
505 65 45-77
*!3J1I8D-aaijec!
*!3J1I8D-aajaaa!
*!3J1I8D-aajaei!
40
44
48
505 65 45-70
505 65 45-74
505 65 45-78
*!3J1I8D-aaijfj!
*!3J1I8D-aajabh!
Thermal insoles
Thick and effective insulating felt insole with heat-reflective aluminium
base. Big enough to be cut to your own size.
505 65 45-00
*!3J1I8D-aajbbg!
Wool insoles
Hard-wearing and warm. Non-slip latex base. Machine washable at 40°C.
Big enough to be cut to your own size.
505 65 45-05
*!3J1I8D-addgcd!
338
*!3J1I8D-aajaff!
Shoe/boots dryer
Quick drying of alltypes of footwear, without making the leatherhard and
brittle. 1,1 meters cable, 4W/230V. Approved according to CE.
544 96 40-01
*!3J1I8D-bfeiif!
339
Head, hearing and sight
protection
Protective helmet - fluorescent
Complete helmet with visor, hearing protectors, sun peak and neck guard.
Replaceable lining and push-out air vents. The visor provides good
visibility and good water run-off and is also resistant to UV light.
Reinforced visor holder, which makes the helmet more stable. The hearing
protectors can be adjusted vertically and sideways and ensure good noise
exclusion, despitelow pressure. The helmet has beentested and it meets the
requirements in EN 397. and ANSI Z89.1-1997 Class G-E. It also complies
with requirements for rigidity, molten metal and low temperature (–40°
C/-40F). Hearing protectors have been tested and they meet the
requirements in EN 352-3 25 dB (A) NRR. The visor has been tested and it
meets the requirements in EN 1731. A table has been engraved in the shell.
It makes it possible to “date mark” the helmet with date of sale or
recommended replacement date.
505 67 55-15
*!3J1I8D-adaadf!
Protective helmet - orange
Complete helmet with visor, hearing protectors, sun peak and neck guard.
Replaceable lining and push-out air vents. The visor provides good
visibility and good water run-off and is also resistant to UV light.
505 67 53-15
*!3J1I8D-adaaci!
340
Protective helmet - accessories
A line of accessories for your protective helmet.
Mesh visor, metal
Fittings, std. Plastic
Hearing protectors with FM radio
505 66 53-21
505 67 53-30
505 66 53-79
*!3J1I8D-aaigcb!
*!3J1I8D-adhcje!
*!3J1I8D-ahadgj!
Mesh visor, nylon
Fittings, fabric
Holder for hearing protectors/helmet
505 66 53-19
505 67 53-34
505 67 53-40
*!3J1I8D-aahhbg!
*!3J1I8D-adhdaa!
*!3J1I8D-ahicfj!
Plexiglass visor
Sweat band
Visor shield
505 66 53-43
505 67 53-18
505 66 53-37
*!3J1I8D-aahhcd!
*!3J1I8D-adjdci!
*!3J1I8D-adighd!
Anti Fog visor
Helmet shell, fluorescent
Neck guard
505 66 53-63
505 67 55-05
505 66 53-06
*!3J1I8D-afdcih!
*!3J1I8D-ahgibb!
*!3J1I8D-aaibii!
Visor holder
Helmet shell, orange
Neck guard winter
505 66 53-28
505 67 53-05
504 98 17-04
*!3J1I8D-aaigdi!
*!3J1I8D-afchfe!
*!3J2J3A-aafbib!
Hearing protectors
Helmet hood
Hygiene absorbents Pro Pad
505 66 53-25
505 66 51-15
505 66 53-31
*!3J1I8D-aaigid!
*!3J1I8D-aaifga!
*!3J1I8D-adfahi!
Hygiene insert
Chin strap
Hygiene inserts for FM radio
505 66 53-26
505 66 53-95
505 66 53-91
*!3J1I8D-aahgig!
*!3J1I8D-ahggic!
Protective helmet, arborist
Similar model as the orange helmet, but with a shorter front. Increased
field of vision and equipped with hearing protection, mesh visor and chin
strap. The helmet has been tested and it meets the requirements in EN 397
and ANSI Z89.1 - 1997 Class G-E. It also complies with requirements for
rigidity, molten metal and low temperature (–40°C/-40F). Hearing
protectors have beentested and they meet the requirements in EN 352-3 25
dB (A) NRR. The visorhas beentested and it meets the requirements in EN
1731. A table has been engraved in the shell. It makes it possible to “date
mark” the helmet with date of sale or recommended replacement date.
Chin strap
505 67 53-25
*!3J1I8D-afddaa!
505 66 53-95
*!3J1I8D-ahggic!
341
*!3J1I8D-afbjce!
Protective helmet, arborist - accessories
A line of accessories for your protective helmet Arborist.
Mesh visor, metal
Fittings, std. plastic
505 66 53-21
505 67 53-30
*!3J1I8D-aaigcb!
*!3J1I8D-adhcje!
Mesh visor, nylon
Fittings, fabric
505 66 53-19
505 67 53-34
*!3J1I8D-aahhbg!
*!3J1I8D-adhdaa!
Perspex visor
Sweat band
Visor shield
505 66 53-43
505 67 53-18
505 66 53-37
*!3J1I8D-aahhcd!
*!3J1I8D-adjdci!
*!3J1I8D-adighd!
Anti Fog visor
Helmet hood
Neck guard
505 66 53-63
505 66 51-15
505 66 53-06
*!3J1I8D-afdcih!
*!3J1I8D-aaifga!
*!3J1I8D-aaibii!
Visor holder
Chin strap
Neck guard winter
505 66 53-28
505 66 53-95
504 98 17-04
*!3J1I8D-aaigdi!
*!3J1I8D-ahggic!
*!3J2J3A-aafbib!
Hearing protectors
505 66 53-25
505 66 53-79
505 66 53-31
*!3J1I8D-aaigid!
*!3J1I8D-ahadgj!
*!3J1I8D-adfahi!
Hygiene insert
Holder hearing protectors/helmet
505 66 53-26
505 67 53-40
505 66 53-91
*!3J1I8D-aahgig!
*!3J1I8D-ahicfj!
Helmet
A somewhat simpler but effective helmet with six point plastic interior.
Can be adjusted vertically, complete with visor and hearing protectors.
Approved for temperatures to –20°C/-4F. The helmet has been tested and
meets the requirements in EN 397. Hearing protectors have been tested
and meets the requirements in EN 352-3. The visor has been tested and
meets the requirements in EN 1731.
6 pack
505 66 56-00
*!3J1I8D-aefafd!
342
*!3J1I8D-afbjce!
Helmet Accessories
A line of accessories for your Helmet.
Mesh visor, metal
Hearing protectors
Fittings
505 66 53-21
505 66 53-25
505 66 56-08
*!3J1I8D-aaigcb!
*!3J1I8D-aaigid!
*!3J1I8D-aiafhd!
Mesh visor, nylon
Helmet hood
505 66 53-19
505 66 53-79
505 66 51-15
*!3J1I8D-aahhbg!
*!3J1I8D-ahadgj!
*!3J1I8D-aaifga!
Perspex visor
Clips for hearing protectors
Visor shield
505 66 53-43
505 66 56-09
505 66 53-37
*!3J1I8D-aahhcd!
*!3J1I8D-ahgggi!
*!3J1I8D-adighd!
Anti Fog visor
Hygiene insert
505 66 53-63
505 66 53-26
505 66 53-31
*!3J1I8D-afdcih!
*!3J1I8D-aahgig!
*!3J1I8D-adfahi!
Visor holder
Helmet shell
505 66 53-28
505 66 56-05
505 66 53-91
*!3J1I8D-aaigdi!
*!3J1I8D-aiafia!
Helmet complete with extra large visor for
power cutting
Complete helmet with extra large visor, hearing protectors, sun peak and
neck guard. Replaceable lining and push-out air vents. The visor provides
good visibility and good water run-off and is also resistant to UV light.
White
544 80 89-01
*!3J1I8D-behdag!
343
*!3J1I8D-afbjce!
Visor shield
For extended protection against sunlight and snow etc. Fits all Husqvarna
helmets.
505 66 53-37
*!3J1I8D-adighd!
Neck guard
Protects neck from water and snow. Fits our protective helmet.
Fibre pile/lined
Unlined
504 98 17-04
505 66 53-06
*!3J2J3A-aafbib!
*!3J1I8D-aaibii!
Hearing protection with FM radio
Hi-fi quality stereo radio. Automatic station locator. Can be locked in
mono position when required. Memory that stores the most recently used
stations and volume. Low energy consumption, automatic shut-off after 4
hours, which saves batteries. All features are controlled by three distinct
buttons, which makes for easy and safe operation. Low battery warning.
Meets requirements of EN 352-1, 352-3.
Headband
Helmet-based
Hygiene kit for FM radio
505 66 53-78
505 66 53-79
505 66 53-91
*!3J1I8D-ahaajd!
*!3J1I8D-ahadgj!
Hearing protection with FM radio - display kit
A campaign package with five hearing protectors with FM radio and one
display stand. Meets requirements of EN 352-1, 352-3.
531 00 92-97
*!3J1I8D-aicefe!
344
*!3J1I8D-afbjce!
Hearing protection with FM radio and
Bluetooth®
Hearing protectors with FM radio with possibility for GSM connection.
The Bluetooth technology with wireless communication represents a
higher safety. Connect your bluetooth-equipped mobile phone to the
hearing protectors. The phone can be carried in your pocket or in your
bag, max. range 10 m. The hearing protectors are equipped with a
microphone that is adjusted in ”stand-by” position when it is not used.
For incoming phone calls it is easily folded down into “talking” position
and by a simple touch on the “talk” button the phone is activated. The
microphone is noise compensated, which means that it works in a noisy
environment. Meets requirements of EN 352-1, EN 352-3.
Hearing protectors
505 66 53-70
505 66 53-91
*!3J1I8D-aiddhg!
*!3J1I8D-afbjce!
Hearing protection
Design allows 20% adjustment of pressure. Lightweight, flexible padded
headband. Protectors have same specifications as those used on the
Husqvarna helmet. Meets requirements of EN 352-1.
Headband
Helmet-based
Hygiene inserts
505 66 53-04
505 66 53-25
505 66 53-26
*!3J1I8D-aahhaj!
*!3J1I8D-aaigid!
Hearing protection with mesh visor
Complete as shown. Cover between visor and headband as above. Meets
requirements of EN 352-1 and EN 1731.
505 66 53-58
*!3J1I8D-agedjj!
345
*!3J1I8D-aahgig!
Hearing protection with perspex visor
Protection for grass clearing and other tasks. Cover between visor and
headband which prevents grass, chips and rain from entering from above.
Complete as shown. The visor can also be purchased separately and fits the
Complete helmet. Can also be fitted with a sun peak. Meets requirements
of EN 352-1, EN 166.
505 66 53-48
*!3J1I8D-ageeaf!
Hearing protection Accessories
A line of accessories for your Hearing protections.
Plexiglas visor
Visor holder
505 66 53-43
505 66 53-42
*!3J1I8D-aahhcd!
*!3J1I8D-aaighg!
Mesh visor, metal
Neck band
Protection cap
505 66 53-21
505 66 53-41
505 66 53-81
*!3J1I8D-aaigcb!
*!3J1I8D-aaiggj!
*!3J1I8D-ahghbc!
Mesh visor, nylon
Hygiene instert
505 66 53-19
505 66 53-26
505 66 53-31
*!3J1I8D-aahhbg!
*!3J1I8D-aahgig!
*!3J1I8D-adfahi!
Anti-fog visor
Holder for cap/visor
505 66 53-63
505 66 53-80
505 66 53-91
*!3J1I8D-afdcih!
*!3J1I8D-ahghaf!
Gardener hearing protection
Extra wide headband for secure and comfortable fit and less pressure on
head. The protectors are made of impact-resistant ABS plastic. 10-pack
delivered in profiled display box. Meets requirements of EN 352-1.
10 pack
505 69 90-12
*!3J1I8D-aedjaf!
346
*!3J1I8D-afbjce!
Gardener hearing protection with visor
Extra wide headband for secure and comfortable fit and less pressure on
head. The protectors are made of impact-resistant ABS plastic. Complete
with visor holder and perspex visor. Meets requirements of EN 352-1 and
EN 166.
505 66 53-60
*!3J1I8D-aedfcd!
Gardener hearing protection accessories
Visor holder
Perspex visor
Anti Fog visor
505 66 53-59
505 66 53-43
505 66 53-63
*!3J1I8D-adebbi!
*!3J1I8D-aahhcd!
Anti-fog visor
Visor of polycarbonate with anti-fog treatment on the inside. Scratch
resistant exterior. Fits all Husqvarna helmets and hearing protector with
headband. Meets requirements of EN 166.
505 66 53-63
*!3J1I8D-afdcih!
Hygiene absorbent pads for earmuffs
Disposable, highly absorbent pads. Easy to fit onto sealing rings in warm
weather conditions or dirty environments. Fits all Husqvarna’s hearing
protectors.
505 66 53-31
*!3J1I8D-adfahi!
347
*!3J1I8D-afdcih!
505 66 53-91
*!3J1I8D-afbjce!
Ear plugs
Effective ear plugs in polyurethane. Cone-shaped with rounded tip for
easy and comfortable insertion.
200/pack
505 66 53-89
*!3J1I8D-aeebig!
Protective glasses, Clear X
Protective glasses with non-scratch, clear lenses. With frames that can be
extended and lenses that can be angled. Meets requirements of EN 166,
ANSI Z87+.
544 96 37-01
*!3J1I8D-bfeicd!
Protective glasses, Yellow X
Protective glasses with non-scratch, yellow tinted lenses for better vision in
dark conditions. With frames that can be extended and lenses that can be
angled. Meets requirements of EN 166, ANSI Z87+.
544 96 37-02
*!3J1I8D-bfeida!
348
Protective glasses, Sun X
Protective glasses with non-scratch, grey tinted lenses with UV-protection
for better vision in sunny conditions. With frames that can be extended
and lenses that can be angled. Meets requirements of EN 166, ANSI Z87+.
544 96 37-03
*!3J1I8D-bfeieh!
Protective glasses, Clear
Protective glasses with non-scratch, clear lenses. With frames that can be
extended. Meets requirements of EN 166, ANSI Z87+.
544 96 38-01
*!3J1I8D-bfeife!
Protective glasses, Sun
Protective glasses with non-scratch, grey tinted lenses with UV-protection
for better vision in sunny conditions. With frames that can be extended.
Meets requirements of EN 166, ANSI Z87+.
544 96 38-02
*!3J1I8D-bfeigb!
Protective glasses, Goggles
Developed for people who wear eyeglasses. Featuring non-scratch lenses
and soft inside for greater comfort. Meets requirements of EN 166.
544 96 39-01
*!3J1I8D-bfeihi!
349
Protective glasses display stand
Display stand for all our protective glasses.
531 00 92-98
*!3J1I8D-aicegb!
Respirator mask for power cutting
Approved respirator mask according to EN 149: 2001, class FF P3. Protects
against very small, unhealthy dry and waterborne particles. The mask is
equipped with an airoutlet to facilitate exhalation. The airoutlet also helps
to lower the temperature inside the mask which prevents condensation
and moisture to occur.
544 96 55-01
*!3J1I8D-bfffeh!
350
Gloves
Comfort gloves - trigger finger and saw
protection
Shaped and reinforced palm. Exposed areas are seamless and reinforced
with leather. Waterproof kid leather palm and hard-wearing, waterrepellent polyester back. Meets requirements of EN 381-4, -7, EN 420:1,
EN 388, class 0, 16 m/s.
8
10
505 64 16-18
505 64 16-20
*!3J1I8D-aaffcb!
*!3J1I8D-aaffef!
9
12
505 64 16-19
505 64 16-22
*!3J1I8D-aaffdi!
*!3J1I8D-aafffc!
Comfort gloves - five finger
with leather. Waterproof kid leather palm and hard-wearing, waterrepellent polyester back. Meets requirements of EN 420:1992, category 1.
07
09
505 64 20-07
505 64 20-09
*!3J1I8D-ahefba!
*!3J1I8D-aajeic!
08
10
12
505 64 20-08
505 64 20-10
505 64 20-12
*!3J1I8D-aajehf!
*!3J1I8D-aajejj!
*!3J1I8D-aajfaf!
Comfort gloves - five finger with saw
protection
with leather. Waterproof kid leather palm and hard-wearing, waterrepellent polyester back. Meets requirements of EN 381-4, -7, EN 420:1,
EN 388, class 0, 16 m/s.
07
09
505 64 20-17
505 64 20-19
*!3J1I8D-ahefch!
*!3J1I8D-aajfcj!
08
10
12
505 64 20-18
505 64 20-20
505 64 20-22
*!3J1I8D-aajfbc!
*!3J1I8D-aajfdg!
351
*!3J1I8D-aajfed!
Comfort gloves - winter
with leather. Waterproof kid leather palm and hard-wearing, waterrepellent polyester back. Meets requirements of EN 420:1992, category 1.
10
12
505 64 24-10
505 64 24-12
*!3J1I8D-aajfib!
*!3J1I8D-aajfji!
Spandex gloves - five finger
High quality gloves with improved spandex material and increased length
for better comfort. The gloves have leather palm and back of Spandex, a
water-repellent and stretchable material. High quality Velcro fastening.
Meets requirements of EN 420:1992, category 1.
9
10
12
505 64 25-09
505 64 25-10
505 64 25-12
*!3J1I8D-aajgae!
*!3J1I8D-aajgbb!
Mittens - trigger finger
Waterproof kid leather palm and hard-wearing, water-repellent polyester
back. Velcro fastening. Meets requirements of EN 420:1992, category 1.
8
10
505 64 18-08
505 64 18-10
*!3J1I8D-aaffhg!
*!3J1I8D-aajebd!
9
12
505 64 18-09
505 64 18-12
*!3J1I8D-aaffid!
*!3J1I8D-aajeca!
352
*!3J1I8D-afciai!
Husqvarna gloves
With a reinforced leather thumb. Palm of heavy-duty leather, back of
polyester for improved comfort. Velcro closure. Meets requirements of
EN 420:1992, category 1.
10
505 64 23-10
*!3J1I8D-aajffa!
Machine operator’s gloves
Gloves made of waterproof kid leather with Velcro fastening. Meets
requirements of EN 420:1992, category 1.
10
12
505 64 17-10
505 64 17-12
*!3J1I8D-adceec!
*!3J1I8D-adcefj!
Gloves, Arbor 16
Glove especially made for arborists. Made in a water repellent kid leather
with back of water repellent polyester. Double leather reinforced inside to
betterstand against when working with ropes. Made in a “short” model for
better comfort. The gloves have Velcro fastening around the wrists. Meets
requirements of EN 381-4, -7, EN 420:1, EN 388 class 0, 16 m/s.
09
10
505 64 03-09
505 64 03-10
*!3J1I8D-ahjcfg!
*!3J1I8D-ahjcgd!
353
Gloves, Garden Pro
This glove is perfect for the professionallandscaper. Short model for better
comfort and Velcro fastening around the wrist. Made in water repellent
kid leather with back in elastic material. Reinforced fingers. Meets
requirements of EN 420:1992, category 1.
06
08
505 65 01-06
505 65 01-08
*!3J1I8D-bdegch!
*!3J1I8D-ahjdff!
07
09
10
505 65 01-07
505 65 01-09
505 65 01-10
*!3J1I8D-aiajff!
*!3J1I8D-ahjdgc!
354
*!3J1I8D-ahjdhj!
Tools
Clearing knives
50 cm
505 69 45-10
*!3J1I8D-aahfbi!
Clearing axes
With hickory shaft and replaceable blade on both faces.
505 69 45-25
*!3J1I8D-aahfdc!
Spare blade
Shaft
505 69 45-26
505 69 45-27
*!3J1I8D-aahfej!
Bark spade
1200 mm long.125 mm wide blade.
Spare blade
505 69 45-28
*!3J1I8D-achhhg!
505 69 45-29
*!3J1I8D-acjbbe!
Timber tongs
Timber tongs made of high quality steel. With an ergonomic handle for
comfort and a perfect grip. 12” / 30 cm grip. Husqvarna engraving in
handle.
505 69 31-01
*!3J1I8D-aahfje!
355
*!3J1I8D-aahffg!
Lifting tongs
Handle with improved design and better grip. Lifting tongs made of high
quality steel. With an ergonomic handle forcomfort and aperfect grip. 8” /
20 cm grip.
505 69 30-30
*!3J1I8D-aahfha!
Lifting hook
New handle with improved design and better grip. With scale for
measuring tip diameter.
505 69 13-30
*!3J1I8D-aahfgd!
“Viktor” foot breaking bar
Telescopic foot breaking bar. Can be carried in a holster on a belt.
504 98 16-92
*!3J2J3A-aafdch!
Holster
Holster for "Viktor" foot breaking bar and impact bar.
505 69 32-92
*!3J1I8D-adiggg!
356
Impact bar
Combined impact and breaking bar. The back of the breaking bar has a
specially shaped impact heel to make it easier to break the wedge.
544 34 18-02
*!3J1I8D-adfafe!
Breaking bar with cant hook
Fiskars fully forged with plastic handle, repeat heel and turning hook.
Complete
Cant hook
505 69 43-01
505 69 43-02
*!3J1I8D-aajiac!
*!3J2J3A-abejda!
Long breaking bar
For bringing down larger trees. With a turning hook. Length 140 cm.
Complete
Cant hook
544 34 18-01
505 69 43-03
*!3J1I8D-becjhe!
*!3J2J3A-abhagb!
Felling wedges
Made of tough polyamide.
14 cm / 5,5"
20 cm / 8"
25 cm / 10"
505 69 47-02
505 69 47-03
505 69 47-04
*!3J1I8D-aajhhc!
*!3J1I8D-aajhij!
357
*!3J1I8D-aajhjg!
Felling wedges
In magnesium
12 cm / 5"
505 69 47-00
*!3J1I8D-aajhgf!
Splitting wedge
Made of high quality steel.
18 cm / 7"
505 69 47-01
*!3J1I8D-aahgff!
Strap
5m, 500kg with safety winch and hook.
505 69 80-34
*!3J1I8D-afdcej!
Strap
8m, 5000kg with safety winch and hook.
505 69 80-33
*!3J1I8D-afdcdc!
358
Turning strap
For moving/turning jammed trees, use together with lifting hook.
505 69 80-35
*!3J1I8D-aaicbi!
Turning strap
For mowing jammed trees and as a carrying strap for cans.
505 69 80-20
*!3J1I8D-aaicab!
Tool belt kit
Tool belt complete in profiled box with tool belt, two holsters, rear tool
carrier, lifting hook, lifting tong and measuring tape.
505 69 90-15
*!3J1I8D-aeiddh!
Tool belt
Extra wide belt to support the back. Can be fitted with a large number of
tools and accessories. Comes together with a screw kit.
Wide belt
Screw kit
505 69 32-16
505 69 32-17
*!3J1I8D-aaibdd!
*!3J1I8D-aaibea!
359
Tool belt accessories
A range of accessories for your tool belt to make it complete.
Combi holster, leather
Combi holster, LD polythene
Rear tool carrier
505 69 16-05
505 69 16-06
505 69 05-10
*!3J1I8D-aaiajg!
*!3J1I8D-aaibac!
Leather waist belt
505 69 00-01
*!3J1I8D-aaiagf!
PVC waist belt
505 69 00-00
*!3J1I8D-aaiafi!
Measuring tape
Simple, lightweight design. Can be adjusted without tools. Marked on
both sides.
15 m
20 m
505 69 73-15
505 69 73-20
*!3J1I8D-aafdaj!
*!3J1I8D-aafdbg!
15 m with timber hook
Holder, holster
505 69 73-16
505 69 75-00
*!3J1I8D-adibhi!
*!3J1I8D-aaibge!
360
*!3J1I8D-aaiahc!
Measuring tape accessories
A range of accessories for your tape measure.
2. Rivet
7. Tape stop
505 69 72-21
505 69 73-35
*!3J1I8D-adhhhf!
*!3J1I8D-adiahj!
3. Spare tape 15 m
8. Release hook
19. Joining tape
505 69 73-01
505 69 72-10
505 69 72-06
*!3J1I8D-aahgce!
*!3J1I8D-adhhic!
*!3J1I8D-adhiib!
4. Spare tape 20 m
9. Timber hook
21. Tape measure plate
505 69 71-05
505 69 72-09
505 69 73-44
*!3J1I8D-aahgbh!
*!3J1I8D-adhhjj!
*!3J1I8D-adjdae!
5. Spare tape 15 m/50 feet
10. Eye
22. Rivet pliers
505 69 73-02
505 69 72-07
505 69 73-00
*!3J1I8D-aahgdb!
*!3J1I8D-adhiaf!
*!3J1I8D-aahhda!
6. Spare tape 20 m/66 feet
16. Cover plate with gearwheel
Spare tape 15 m with timber hook
505 69 73-03
505 69 73-31
505 69 73-04
*!3J1I8D-aahgei!
*!3J1I8D-adhifa!
*!3J1I8D-adibgb!
Callipers
With table of cylinder volumes, centimeter gradations on 2 sides.
36 cm
46 cm
Holster
505 69 47-30
505 69 47-46
505 69 32-04
*!3J1I8D-aajheb!
*!3J1I8D-aajhfi!
Sledge axe
82 cm axe made of hand-forged Swedish quality steel with the Husqvarna
logo burned into the handle and on the leather edge guard. Handle
fastened with a new steel wedge. Sharper finish of the axe head.
82 cm
Spare shaft
505 69 45-05
505 69 45-03
*!3J1I8D-aahege!
*!3J1I8D-aahefh!
361
*!3J1I8D-aaibbj!
Splitting axe
74 cm. High quality Swedish steel blade and hickory shaft. Leather edge
guard.
74 cm
Spare shaft
505 69 45-06
505 69 45-02
*!3J1I8D-aahehb!
*!3J1I8D-aaheea!
All-round axe
guard.
68 cm
Spare shaft
505 69 45-00
505 69 45-01
*!3J1I8D-aahebj!
*!3J1I8D-aahedd!
Small splitting axe
guard.
505 69 45-08
*!3J1I8D-aahejf!
Carpenter´s axe
High quality Swedish steel blade and hickory shaft. Leather edge guard.
505 69 45-09
*!3J1I8D-aahfab!
Hatchet
guard.
35 cm
505 69 45-07
*!3J1I8D-aaheii!
362
Marking tape, two colours
Made of 100% viscosepulp, biodegradable. 30 mm wide and approx. 70 m
long.
red/white
orange/yellow
blue/white
505 69 83-05
505 69 83-06
505 69 83-07
*!3J1I8D-aajjfg!
*!3J1I8D-aajjgd!
*!3J1I8D-adhcih!
Marking tape, one colour
Made of 100% viscosepulp, biodegradable. 20 mm wide and approx. 75 m
long.
orange
blue
505 69 83-00
505 69 83-02
*!3J1I8D-aajjab!
*!3J1I8D-aajjcf!
red
yellow
white
505 69 83-01
505 69 83-03
505 69 83-04
*!3J1I8D-aajjbi!
*!3J1I8D-aajjdc!
*!3J1I8D-aajjej!
Crayons
Crayon 11 mm, 12 pcs
Crayon holder
Inner sleeve
505 69 46-02
505 69 46-00
505 69 46-01
'!0A08AF-aaadbh!
*!3J1I8D-aajiea!
First-aid kit
Contents: 3 plasters, 1 mirror, 2 sterile wipes, 1 cotton bud and 1 pressure
bandage.
505 66 52-00
*!3J1I8D-aaifhh!
363
*!3J1I8D-aajifh!
Pressure dressing
505 66 52-06
*!3J1I8D-aaifjb!
Marking paint
Aerosol, approx. 400 ml.
orange, 10/pack
blue, 10/pack
white, 10/pack
505 69 84-00
505 69 84-02
505 69 84-04
*!3J1I8D-aajjha!
*!3J1I8D-aajjje!
*!3J1I8D-abaabd!
red, 10/pack
yellow, 10/pack
fluorescent orange, 10/pack
505 69 84-01
505 69 84-03
505 69 84-10
*!3J1I8D-aajjih!
*!3J1I8D-abaaag!
Pistol grip for aerosol
505 69 85-14
*!3J1I8D-abaadh!
364
*!3J1I8D-abaaca!
Marking paint in plastic container
5 litres plastic container.
orange, 3/pack
blue, 3/pack
505 69 85-80
505 69 85-82
*!3J1I8D-ahihhi!
*!3J1I8D-ahihjc!
red, 3/pack
waterbased orange, 3/pack
fluorescent orange, 3/pack
505 69 85-81
505 69 85-85
505 69 85-90
*!3J1I8D-ahihif!
*!3J1I8D-ahiiai!
Paint spray
Pump-action bottle. Holds approx. 1 litre.Spare nozzle can be purchased
separately.
spray bottle 1 lit.
extended nozzle
505 69 85-25
505 69 85-30
*!3J1I8D-abaaee!
*!3J1I8D-abaafb!
365
*!3J1I8D-ahiibf!
Tree care tools
Foldable pruning saw 180 mm
Lightweight pruning saw in high quality steel with an ergonomic handle
for high comfort. The blade locks in place and folds away safely when not
used. Cuts on the pull stroke. For cutting timber, plastic pipe, wall board,
trimming branches and general pruning. Hard chrome plated to improve
solidity and rust resistance. Resharpening is not necessary in normal use.
3D Husqvarna logo in handle. Length 180 mm. Blister packed.
Foldable pruning saw, 180 mm
544 08 02-01
*!3J1I8D-bdfahf!
Foldable pruning saw 220 mm
for high comfort. The blade locks in place and folds away safely when not
used. Cuts on the pull stroke. For cutting timber, plastic pipe, wall board,
trimming branches and general pruning. Hard chrome plated to improve
solidity and rust resistance. Resharpening is not necessary in normal use.
3D Husqvarna logo in handle. Length 220 mm. Blister packed.
Foldable pruning saw, 220 mm
544 08 02-02
*!3J1I8D-bdfaic!
Pruning saw with holster 240 mm
for high comfort. Practical holster to fasten on your belt with a clip to
effectively release the saw when not used. Cuts on the pull stroke. For
cutting timber, plastic pipe, wall board, trimming branches and general
pruning. Hard chrome plated to improve solidity and rust resistance.
Resharpening is not necessary in normal use. 3D Husqvarna logo on the
handle. Length 240 mm. Blister packed.
544 08 02-03
*!3J1I8D-bdfajj!
366
Pruning saw with holster 300 mm
for high comfort. Practical holster to fasten on your belt with a clip to
effectively release the saw when not used. Cuts on the pull stroke. For
cutting timber, plastic pipe, wall board, trimming branches and general
pruning. Hard chrome plated to improve solidity and rust resistance.
Resharpening is not necessary in normal use. 3D Husqvarna logo on the
handle. Length 300 mm. Blister packed.
544 08 02-04
*!3J1I8D-bdfbaf!
Telescopic shaft
2.5–5 metres. With simple length adjustment.
Telescopic shaft
Sleeve 27-31 mm
502 42 73-01
502 42 52-03
*!3J2J3A-abfhcc!
*!3J1I8D-ajcfbe!
Sleeve 31-35 mm
Wingnut
502 42 56-03
502 42 53-03
*!3J1I8D-ajcfef!
*!3J1I8D-ajcfcb!
Limbing saw with bark blade
Curved blade with hook at tip and blade for cutting bark to prevent
splitting.
Spare blade
505 69 45-66
*!3J1I8D-aahcfj!
505 69 45-77
*!3J1I8D-addcjg!
Limbing saw
A slightly simpler version without bark blade.
Spare blade
505 69 45-76
*!3J1I8D-addegd!
505 69 45-87
*!3J1I8D-addeha!
367
Limbing and pruning saw
For pruning trees, etc. Blade can be rotated to a choice of positions.
Spare blade
505 69 45-64
*!3J1I8D-aajibj!
505 69 45-65
*!3J1I8D-aajicg!
Multi-purpose pruning shear 200 mm
By-pass pruner for pruning flowers or small branches. Blade in high
quality steel with a Dupont Teflon-S coating for a smoother and easier
cutting. Ergonomic handle for a safe and comfortable usage.
Multi-purpose pruning shear, 200 mm
544 20 30-01
*!3J1I8D-bdihjd!
Anvil pruning shear 220 mm
Anvil pruning shear for pruning away dead or diseased bransches and
shaping plants. Blade in high quality steel with a Dupont Teflon-S coating
for a smoother and easier cutting. Ergonomic handle for a safe and
comfortable usage.
Anvil pruning shear, 220 mm
544 20 30-02
*!3J1I8D-bdiiaj!
Universal pruning shear 220 mm
By-pass pruner for pruning small or mid-sized branches. Blade in high
cutting. Ergonomic, plastic handle for a safe and comfortable usage.
544 20 30-03
*!3J1I8D-bdiibg!
368
Universal pruning shear 200 mm
By-pass pruner for pruning small and mid-sized branches. Blade in high
cutting. Ergonomic handle in fiber glass. The special shape of this pruning
shear makes it easier to make closer cuts. Fits left handed people.
544 20 30-04
*!3J1I8D-bdiicd!
Professional pruning shear 210 mm
Professional by-pass pruner for pruning and shaping branches. Blade in
high quality steel with a Dupont Teflon-S coating for a smoother and
easier cutting. Ergonomic, aluminium handle for a safe and comfortable
usage.
544 20 30-05
*!3J1I8D-bdiida!
Professional pruning shear 230 mm
Professional by-pass pruner for pruning and shaping branches. Blade in
high quality steel with a Dupont Teflon-S coating for a smoother and
easier cutting. Ergonomic, aluminium handle for a safe and comfortable
usage. The blade can be set in two different positions, a large or small blade
opening.
544 20 30-06
*!3J1I8D-bdiieh!
Garden kit
All you need to keep your garden trim. Incl. foldable pruning saw 180 mm,
multipurpose pruning shear 200 mm and universal pruning shear 220
mm.
544 97 71-01
*!3J1I8D-bfgihf!
369
Holster for pruning shears
505 69 32-25
*!3J1I8D-addaib!
Limbing shears – domestic
531 00 50-69
*!3J1I8D-addeje!
370
Cans
Combi can
Holds 6 litres of petrol and 2.5 litres chain oil. The petrol can has an
effective overfill protection. Whenthe tank is full, the flow is automatically
shut off and you can lift the can up without spillage. The cans can be
separated from each other, with space for files and tools in between them.
Approved in accordance with UN regulations.
505 69 80-00
*!3J1I8D-aafgfb!
Petrol can, orange
Holds 6 litres of petrol. The petrol can has an effective overfill protection.
When the tank is full, the flow is automatically shut off and you can lift the
can up without spillage. Approved in accordance with UN regulations.
505 69 80-01
*!3J1I8D-aahijb!
Accessories for combi can and petrol can
orange
A line of accessories for your combi can and petrol can.
Sealing ring
Spanner
505 69 80-05
505 69 80-24
*!3J1I8D-ababed!
*!3J1I8D-abacdf!
Holder for clearing saw/blades
Oil can without pipe
505 69 80-23
505 69 80-09
*!3J1I8D-abacci!
*!3J1I8D-ababhe!
371
Fuel pipe for petrol can orange
Improved sealing ring (O-ring).
505 69 80-02
*!3J1I8D-ababcj!
Oil pipe
Oil nozzle
505 69 80-03
*!3J1I8D-ababdg!
Petrol can, green
Specially adapted for lawn mowers and cars with catalytic converters.
Capacity: 6 litres. Approved in accordance with UN regulations.
505 69 80-40
*!3J1I8D-aahjah!
Fuel pipe for petrol can green
Fuel pipe that fits our green petrol can.
505 69 80-41
*!3J1I8D-abacec!
372
Adapter
Allows a Husqvarna fuel pipe to be fitted to a 5 litre disposable can
(environmental petrol).
505 69 80-19
*!3J1I8D-ababji!
Cap with retaining strap
505 69 80-11
*!3J1I8D-ababib!
Environmental kit
A profiled package consisting of an oil can, oil pipe without cap,cap with
retaining strap, adapter, oil can holder and fuel pipe.
505 69 80-60
*!3J1I8D-aaeecf!
Holder
For 5 litre disposable can (environmental petrol).
505 69 80-50
*!3J1I8D-abacgg!
373
Filler funnel
505 69 80-22
*!3J1I8D-abacbb!
374
Lubricants
Two stroke oil, XP
High-quality semisynthetic oil for high-performance engines and
demanding conditions. Provides superior lubrication of bearings and
cylinders, and a reduced engine temperature. Recommended for topperforming chainsaws and grass-/ brushcutters.Meets requirements of
JASO FB/ISO EGB, Rotax 253 Snowmobile test.
0,1 litres
10 litres
544 45 01-01
544 45 01-03
*!3J1I8D-begafh!
*!3J1I8D-bfghdf!
1 litre
208 litres
544 45 01-02
531 00 92-67
*!3J1I8D-bfghci!
*!3J1I8D-aiacfc!
Two stroke oil, Low Smoke
Two stroke oil with higher levels of selected synthetic components, which
produces less exhaust fumes but provides excellent lubrication. The oil’s
lowerash content takes care of the catalytic converter and reduces deposits
in the engine.Meets requirements of JASO FD/ISO EGD, Rotax 253
Snowmobile test.
0,1 litres
4 litres
544 45 02-01
544 45 02-03
*!3J1I8D-begage!
*!3J1I8D-bfghfj!
1 litre
10 litres
208 litres
544 45 02-02
544 45 02-04
531 00 50-76
*!3J1I8D-bfghec!
*!3J1I8D-bfghgg!
*!3J1I8D-addfff!
Two stroke oil, High Performance
Designed to meet all the tough challenges a two-stroke engine oil can
encounter. Husqvarna's two stroke oil is also formulated to work well with
low-quality fuels. Carefully selected components in this part synthetic oil
gives acleanerengine and less coating onthe piston/cylinder walls, exhaust
port and crankcase.Meets requirements of JASO FB/ISO EGB, Rotax 253
Snowmobile test.
0,1 litres
1 litre (dosage bottle)
544 01 58-05
544 01 58-09
*!3J1I8D-bdbafd!
*!3J1I8D-bfgiad!
1 litre (standard bottle)
4 litres
10 litres
544 01 58-08
544 01 58-10
544 01 58-11
*!3J1I8D-bfghjh!
*!3J1I8D-bfgiba!
375
*!3J1I8D-bfgich!
Two stroke oil, Oil guard
Specially developed oil for power cutters. Designed to meet all the tough
challenges a two-stroke engine oil can encounter. Equal to Husqvarna two
stroke oil High Performance. Meets requirements of JASO FB/ISO EGB,
Rotax 253 Snowmobile test.
1 litre
544 97 68-01
*!3J1I8D-bfgigf!
Engine oil, WP 4T SAE 30
Specialoil forall 4-stroke lawn mowers on the market. Meets requirements
of API SG.
0,6 litres
1,4 litres
544 04 18-01
544 04 18-02
*!3J1I8D-bdbaga!
*!3J1I8D-beijdi!
Engine oil, WP 4T SAE 10W/40
High quality engine oil for all 4-stroke garden equipment. Developed for
easy starting at low temperatures, perfect lubrication at all operating
conditions and low oil consumption. The oil keps your engine free from
deposits and fouling which extends the life of the engine. Meets
requirements of API SL (CF), ACEA A3 (B3).
0.08 Litres
1.4 Litres
531 00 92-71
531 00 92-85
*!3J1I8D-aibjhg!
*!3J1I8D-aidehf!
Husqvarna saw chain oil, Vegoil
A vegetable-based chain oil that has been carefully developed by
Husqvarna to produce a highly effective, environmentally compatible
lubricant. Biodegradable and economical – up to 40% less oil is required
than with conventional oils. Low viscosity even in extreme cold and able to
handle water contamination. Can be cleaned with common detergents.
1 litre, 12 pcs/pack, 40 pack/pallet
20 litres, 24 pcs/pallet
544 04 51-01
531 00 75-77
*!3J1I8D-bdbbah!
*!3J1I8D-affbca!
5 litres
200 litres, drum
1000 litres
531 00 75-78
531 00 75-79
531 00 80-42
*!3J1I8D-ahdjii!
*!3J1I8D-affeba!
376
*!3J2J3A-acbbib!
Oil display stand
Practical display stand for oils and other accessories.
544 32 78-01
*!3J1I8D-becdej!
Air filter oil
Biodegradable. Effectively traps particles in the filter, keeping the engine
cleaner and reducing wear. Washable in soap and water.
1 litre
531 00 92-48
*!3J1I8D-ahichd!
Husqvarna 2 stroke fuel
Husqvarna (Aspen) 2 stroke fuel for your two stroke engines is an
environmentally friendly fuel, free from aromatics such as benzene and
toluene, as well as sulphur and olefins, which minimises the health risk
arising from exposure to petrol fumes and emissions. 5 Litres.
000 00 00-00
Husqvarna 4 stroke fuel
Husqvarna (Aspen) 4 stroke fuel for your four stroke engines is an
environmentally friendly fuel, free from aromatics such as benzene and
toluene, as well as sulphur and olefins, which minimises the health risk
arising from exposure to petrol fumes and emissions. 5 Litres.
000 00 00-00
377
Husqvarna bearing grease
For lubricating the nose wheel bearing.
503 62 12-01
*!3J1I8D-adicai!
Bearing grease
High-quality bearing grease for hedge trimmers.
400 g.
531 00 92-05
*!3J1I8D-aiaggf!
ECO gear grease
For brushcutter bevel gears. A proven grease that lubricates the
transmission and absorbs the axial forces. Environmentally compatible.
Biodegradable.
100 g.
503 97 64-01
*!3J1I8D-adicbf!
Multipurpose grease
225 g.
225 g.
502 51 27-01
*!3J1I8D-adhhdh!
378
Grease gun
For lubricating bar tip bearing and clutch needle bearings. Grease not
included.
Grease gun
Grease (gear)
Grease (225H)
501 91 14-01
503 80 17-01
503 98 96-01
*!3J2J3A-abhddh!
*!3J1I8D-acgfjf!
UL 21 grease
Synthetic grease in spray form. Penetrates and lubricates moving metal
parts such as shear edges and hinges. Provides extended rust protection.
Will not damage varnish or rubber.
Spraybottle 200 ml
544 14 21-01
*!3J1I8D-bdhaaa!
UL 22 grease
Moisture-repellent rust protection spray that penetrates and removes
moisture from electric components. Will not damage varnish or rubber.
Spraybottle 200 ml
544 14 22-01
*!3J1I8D-bdhace!
Sharpening paste
For sharpening blades on manual mowers. 100 g.
1 pcs
20 pcs/pack
295 63 96-01
295 64 13-01
*!3J1E3J-ibbcig!
*!3J1E3J-ibbecc!
379
*!3J1I8D-adieag!
Grease (gear)
503 80 17-01
*!3J1I8D-acgfjf!
Grease (255H)
503 98 96-01
*!3J1I8D-adieag!
380
381
Workshop Concept
382
Handtools, general purpose
T-handle wrench kit
Includes T-handle allen key 3, 4, 5, 6 mm and a T-handle socket wrench 8
mm
504 90 00-06
T-handle allen key
3 mm
4 mm
5 mm
502 50 19-01
502 50 18-01
502 50 64-01
T-handle socket wrench
Allen screwdriver
Torx screwdriver
T20
502 51 67-01
383
Z allen key
4 mm
502 71 36-01
Socket wrench
343R, 345RX, 343F, 345FX, 345FXT
502 11 46-03
384
Pressure testing tools
Pressure vacuum tester
531 03 06-23
Rubber wedge
Spark plug adapter
503 84 40-02
Cover, intake and exhaust
40,45,51,55
504 90 29-02
385
Plug for Auto smart start
503 55 22-01
Cover, intake
394
281, 288
3120
502 52 01-01
502 50 47-01
502 71 38-01
51, 55, 385
3120
288
502 54 02-01
502 71 39-01
502 50 81-01
Cover, exhaust
Spacer (35 mm)
42, 242, 246, 254, 257, 262, 61, 268, 272, 281, 288, 250 R, 265
502 50 45-01
386
Spacer, intake
387
Ignition system
Flywheel removal tool, kit
502 51 49-02
Flywheel removal tool
504 91 08-03
Universal puller
502 50 26-01
Flywheel removal tool (coarse thread)
504 91 08-07
388
Flywheel removal tool (fine thread)
502 51 94-01
Test plug
502 71 13-01
Spark plug airgap tool
0,5 mm
502 51 91-01
Ignition unit airgap tool
389
Spark plug lead pliers
502 50 06-01
390
Carburettor
Carburettor adjustment screwdriver
136, 137, 141, 142
530 03 55-60
Carburettor adjustment screwdriver
531 00 48-63
Limiter cap removal tool
530 03 11-57
Limiter cap parts pack
Walbro
531 03 05-54
391
Carburettor repair kit
Walbro
531 03 01-91
Level gauge
Walbro
531 03 01-92
Pressure testing gauge
501 56 27-01
392
Clutch, oiler
Puller, clutch
340, 345, 346, 350, 351, 353
502 54 16-02
Puller, clutch
136, 137, 141, 142
530 03 11-12
Clutch removal tool
357, 359
502 52 22-02
Clutch removal tool
365, 371, 372, 385, 570, 575
502 52 22-01
Clutch removal tool
340, 345, 346, 350, 351, 353
502 54 16-02
Clutch drum removal tool
393
Clutch spring installation tool
502 50 49-01
Puller, oil pump drive wheel
51, 55, 42, 242, 246, 254, 257, 262
502 50 99-01
Puller, gear, oilpump
136, 137, 141, 142
530 03 11-36
Stop, sprocket, cutting head
325P
502 52 37-01
394
Crankcase, crankshaft
Crankcase splitter
Crankcase/Crankshaft splitter tool
Crankcase/Crankshaft splitter tool
343R, 345RX, 343F, 345FX, 345FXT
502 52 39-01
Universal puller (crankshaft bearing)
504 90 90-02
395
Crankshaft assembly tool
346, 351, 353
502 54 18-01
Crankshaft installation tool
281, 288
502 50 30-08
365, 371, 372
346, 351
502 50 30-15
502 50 30-18
40, 45, 51, 55
502 50 30-09
357, 359
343R, 345RX, 343F, 345FX, 345FXT
502 50 30-16
502 50 30-19
254, 262, 51, 55
502 50 30-10
385
61, 268, 272
502 50 30-17
502 50 30-04
575, 570
502 50 30-20
Seal ring mandrel
396
Seal ring protector tool
288, 394, 3120
42, 242, 250,265
340, 345, 350, 346, 351
502 50 52-01
502 51 50-01
502 54 20-01
Seal ring mandrel
42, 242, 288, 394, 3120, 250, 265
502 50 82-01
23C
51, 55, 254, 257, 262
530 03 10-35
502 50 79-01
250PS, 32, 250, 252, 265, Mondo
504 91 28-00
Seal ring removal tool
357, 359, 385
505 38 18-09
Seal ring removal tool
397
Puller for crankshaft bearing
325HS
531 00 48-67
398
Cylinder, piston
Piston stop, plastic
502 54 15-01
Piston stop, metal
Short
504 91 06-05
Piston stop, metal
>80 cc, Long
502 50 33-01
Assembly kit, piston
502 50 70-01
Piston pin installation tool
399
Piston pin installation tool
343R, 345RX, 343F, 345FX, 345FXT
502 52 42-01
Compression tester
531 03 16-86
400
Vibration damping
AV spring removal tool
AV rubber damper removal tool
11mm, 61, 268, 272
502 50 67-01
14mm, 136, 141, 42, 242, 246, 61, 268, 272, 250R
502 51 00-02
18 mm, 61, 268, 272, 288, 394, 3120
502 50 66-02
401
Chain tools
Chain breaker tool
531 01 27-11
Chain spinner tool
531 01 27-12
Chain cutting guide
640 00 04-59
Grinding disc
402
Chain sharpening machine
508 23 26-53
403
Bevel gear tools
Locking screw wrench
Locking screw puller
240, 245
502 50 65-01
Locking screw tool
250, 252
502 52 17-01
Centering sleeve
250, 245, 252, 249
502 52 15-01
404
Tractor, rider
Claw spanner
Rider 850
506 56 71-01
Pulley removal tool
Riders
506 89 92-01
Allen key
Pulley puller
Riders
506 66 48-01
Rear wheel puller
Riders
506 57 00-01
405
Fitting drift, kit
Riders, Exchange of bushing (rear swing axle)
535 41 32-01
Control spring removal tool
Riders
506 89 93-01
406
Workshop equipment
Chain sharpening machine
508 23 26-53
Chain saw power head holder
502 51 02-01
Brushcutter/trimmer holder
502 51 03-01
Tractor lift
See support site for ordering
544 07 54-01
407
Test box Chain saw/Trimmer
544 07 47-01
Tachometer
502 71 14-01
Storage rack
544 07 49-01
Storage rack/plastic boxes
544 07 50-01
408
Locker
544 07 51-01
Work bench
544 07 48-01
Washing unit
See Support Site for ordering, Washing units 230/400Voltage/
3000W
544 07 52-01
Universal puller
Crankshaft bearing
504 90 90-02
409
Thread repair insert
Silicone sealant
300 ml
503 26 72-01
Active cleaning detergent
12*1 l
505 69 85-70
410
Clothing
Shirt, short sleeve
Short sleeve shirt with Husqvarna logoPhonepocket on the armSurface
fabric: 60% Cotton, 40% PolyesterSizes: XS-XXXL
Fristad artno: SB 733 90
544 13 08-01
Shirt, long sleeve
Long sleeve shirt with Husqvarna logoSurface fabric: 60% Cotton, 40%
PolyesterSizes: XS-XXXL
Fristad artno: SB 735 90
544 13 09-01
Trousers, workshop
Workshop trousers with Husqvarna logoSurface fabric: 65% Polyester,
35% CottonSizes: C44-C62, C146-C156, D96-D116
Fristad artno: P 154 280 90
544 13 05-01
Trousers, workshop (Asia)
Workshop trousers with Husqvarna logoSurface fabric: 65% Polyester,
35% CottonSizes: C34-C50
544 13 06-01
411
Trousers, Zip-Off
Zip off trousers with Husqvarna logo, easily made into short
trousersSurface fabric: 65% Polyester, 35% CottonReinforcement/
Pocket lining: 100% PolyamidSizes: C44-C62, C146-C156, D96-D120
Fristad artno: PS 25 242 90
544 13 07-01
Trousers, Bib
Bib trousers with Husqvarna logoSurface fabric: 65% Polyester, 35%
CottonSizes: C44-C62, C146-C156, D96-D116
Fristad artno: PR 154 81 90
544 34 87-01
Coat
Coat with Husqvarna logoFabric: 65% Polyester, 35% CottonSizes: XSXXXLDelivery time 10-12 weeksMinimum order quantity is 200 pieces
Fristad artno: PR 154 11 17 90
544 13 11-01
Jacket, work
Jacket Work with Husqvarna logoSurface fabric: 65% Polyester, 35%
CottonSizes: XS-XXL
544 34 90-01
412
Jacket, casual
Jacket Casual, Softshell with Husqvarna logoFabric: 100% PolyesterSizes:
S-XXL
Fristad artno: Code 1403 90
544 34 88-01
Jacket, work/winter
Jacket Work/Winter, Airtech with Husqvarna logoSizes: S-XXL
Fristad artno: GT 406
544 34 89-01
Overall
Overall with Husqvarna logoFabric: 65% Polyester, 35% CottonSizes:
C44-C62, C146-C156, D96-D116
544 13 10-01
413
414
2007-01-15
Husqvarna conducts continuous product development and reserves theright to change designs, specifications and equipment levels without priornotification. All products with
moving parts can be dangerous if usedimproperly. Therefore, always read the instructions carefully. Equipmentand performance can vary from market to market. Ask your dealer
aboutavailable equipment and performance in your market. All technical datawas current at time of printing. However such data is subject to changedue to product development.
We cannot accept responsibility for printing errors.
415
Drawing on over 300 years of engineering experience,
Husqvarna today provides world-leading solutions for
the care of forests, parks and gardens. With an optimal
combination of professional performance and user focus,
Husqvarna products give you efﬁciency, job satisfaction
www.husqvarna.com
106 38 15-26
and quality results.

Technical solutions for chain saws.

Transcription

Similar documents

Top Angebote

2012LandMaint Price List

Husqvarna price list July 2010

Sicher und sportlich durch den Sommer!

parts list - Chainsaw Journal