Grinders

Spare parts for:
Coffee grinders
<T2
Grinders
T2>
Rel. 2016-03301406
This catalogue is automatically generated.
Therefore, the sequence of the items might
not be always shown at best.
Updates will be issued in case of additions
and/or amendments.
<T2
T2>
Grinders
Suitable for:
1251169
<|
Suitable for:
|>
FRANKE LEFT GRINDING BURRS PAIR
1251184
<|
|>
ø external 64 mm - ø internal 37 mm
thickness 8,5 mm - 3 fixing holes
1251183
<|
|>
GRIND.BURRS(PAIR)RHEA LH
1251190
<|
|>
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
1251156
<|
|>
GRINDING BURRS PAIR NECTA-LAVAZZA RH
1251172
|>
GRINDING BURRS PAIR RHEA LH
1251171
<|
|>
1251157
|>
THERM OPLAN LEFT GRINDING BURRS PAIR
ø external 64 mm - ø internal 37 mm
thickness 8,6 mm - 3 fixing holes
GRINDING BURRS PAIR RHEA LH
external ø 54 mm - internal ø 33 mm
thickness 8 mm - 3 fixing holes
1251161
<|
|>
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
<|
GRINDING BURRS PAIR MAZZER RH
external ø 58 mm - internal ø 33,5 mm
thickness 8.5 mm - 3 fastening holes
for Grinder-dispenser (MAZZER) MINI
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
<|
GRIND.BURRS(PAIR) NECTA RH
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
SCHAERER LEFT GRINDING BURRS PAIR
ø external 65 mm - ø internal 35 mm
thickness 8,4 mm - 2 fixing holes
<|
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
ANFIM
<
T
2
1251002
<|
|>
GRINDING BURRS ANFIM (PAIR) LEFT
1251001
<|
T
2
>
|>
external ø 64 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (ANFIM) CAIMANO ON DEMAND
for Grinder-dispenser (ANFIM) CAIMANO - LUSSO
for Grinder-dispenser (SPAZIALE) LUX800
ANFIM 64
1251003
<|
ANFIM 54
|>
GRINDING BURRS ANFIN (PAIR) LH
1251120
<|
|>
external ø 75 mm - internal ø 43 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (ANFIM)
CAIMANO SPECIAL450 AUTOMATICO
CAIMANO SPECIAL450 TIMER
SPECIAL450 AUTOMATICO - SPECIAL450 TIMER
SUPER CAIMANO - SUPERLUSSO
for Grinder-dispenser (SPAZIALE) S/LUX450
ANFIM 75
1251018
ANFIM 50
ARISTARCO
|>
GRINDING BURRS ARISTARCO (PAIR) RIGHT
external ø 64 mm - internal ø 37 mm
thickness 8.5 mm - 3 fixing holes
for Grinder-dispenser (ARISTARCO) EMA75 - EMA80
SE/N
ARISTARCO 70111
GRINDING BURRS PAIR ANFIM LH
external ø 50 mm - internal ø 30 mm
thickness 7.6 mm - 3 mounting holes
for Coffee grinder (ANFIM) HAUSSELF
for Grinder-dispenser (ANFIM) HAUS
ANFIM 75-SP
<
T
2
<|
GRINDING BURRS ANFIN (PAIR) LEFT
external ø 54 mm - internal ø 32 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (ANFIM) BEST - SUPERBEST
<|
T
2
>
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
ARISTARCO
<
T
2
1251006
<|
|>
GRINDING BURRS ARISTARCO-GAGGIA(PAIR) RH
1251007
<|
T
2
>
|>
external ø 58 mm - internal ø 34 mm
thickness 8 mm - 3 mounting holes
ARISTARCO 70110
1251014
<|
|>
GRINDING BURRS ARISTARCO-GAGGIA(PAIR) RH
GRINDING BURRS ARISTARCO-GAGGIA(PAIR) RH
external ø 84 mm - internal ø 45 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (ARISTARCO) EMA80
for Grinder-dispenser (GAGGIA) MD85
for Grinder-dispenser (SAECO) MS85
ARISTARCO 70113
|>
<|
external ø 74 mm - internal ø 42.5 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (ARISTARCO) EMA80
ARISTARCO 70112
ASTORIA CMA
<
T
2
1251142
<|
|>
CONICAL GRIND ING BURRS COM PAK (PAIR) RH
1251125
<|
|>
external ø 68/49 mm - internal ø 41/13 mm
thickness 25 mm - 4 mounting holes
for Grinder-dispenser (COMPAK) K10
1251927
|>
GRIND.BURRS M AZZER (PAIR) RH SINGLE-PH.
external ø 83 mm - internal ø 49 mm
thickness 9.6 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) MAJOR
MAJOR ELETTRONICO
ASTORIA CMA 28215
GRIND.BURRS ASTORIA-M AHLKONIG(PAIR) LEFT
external ø 65 mm - internal ø 38 mm
thickness 8.4 mm - 2 mounting holes
for Coffee grinder (ASTORIA CMA) K30
for Grinder-dispenser (MAHLKÖNIG) K30
for Grinder-dispenser (RENEKA) MK10
ASTORIA CMA 28217016
<|
T
2
>
ASTORIA CMA 28530000
1251056
<|
|>
ASTORIA CMA 28530001
ASTORIA CMA 28530002
GRIND.BURRS M AZZER (PAIR) RH THREE-PH.
external ø 64 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) SUPERJOLLY
ASTORIA CMA 28213
<T2
T2>
Grinders
Suitable for:
1251930
<|
Suitable for:
|>
GRIND.BURRS M AZZER (PAIR) RH THREE-PH.
1251933
<|
|>
external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) SUPERJOLLY
ASTORIA CMA 28213001
1251011
<|
|>
GRINDING BURRS ASTRAL-ROSSI (PAIR) LEFT
ASTORIA CMA 28215001
1251137
<|
|>
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (BRASILIA) CC45 - RR45
RR55 - RR65 - R80
for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7
for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA
for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55
RR65 - R80
1251138
|>
GRINDING BURRS COM PAK (PAIR) RH
ASTORIA CMA 28217013
1251503
<|
|>
external ø 58 mm - internal ø 33 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K3
1251140
|>
GRINDING BURRS COM PAK (PAIR) RIGHT
external ø 82.5 mm - internal ø 49 mm
thickness 9.5 mm - 3 mounting holes
for Coffee grinder (COMPAK) A8
for Grinder-dispenser (COMPAK) K8
ASTORIA CMA 28217011
GRINDING BURRS COM PAK (PAIR) RH
ø internal 43 mm - ø external 75 mm
thickness 10.5 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K7
ASTORIA CMA 28217014
<|
GRINDING BURRS COM PAK (PAIR) RH
external ø 54 mm - internal ø 32 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K3
ASTORIA CMA 28216
<|
GRIND.BURRS M AZZER (PAIR) RIGHT THREE-PH
external ø 83 mm - internal ø 49 mm
thickness 9.6 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) MAJOR - ROYAL
ROYAL ELETTRONICO - STARK
ASTORIA CMA 28217002
1251128
<|
|>
GRINDING BURRS CUNILL (PAIR) LEFT
external ø 65 mm - internal ø 30 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (ASTORIA CMA) C
for Grinder-dispenser (CUNILL) BIMOTOR - COSTARICA
ETIOPIA - HAWAI - HAWAI2 - MICHIGAN
MICHIGAN2008 - MOVIE2009 - NOBEL - SALSA2008
ASTORIA CMA 28500016
<T2
T2>
Grinders
Suitable for:
1251634
<|
Suitable for:
|>
GRINDING BURRS CUNILL (PAIR) LEFT
1251225
<|
|>
external ø 59 mm - internal ø 34 mm
thickness 9 mm - 3 mounting holes
for Coffee grinder (CUNILL) ELCAFETRANQUILO
RUMBA
for Grinder-dispenser (ASTORIA CMA) C
for Grinder-dispenser (CUNILL) BRASIL - COLOMBIA
FULLMETAL - MARFIL - MEXICO - SPACE - TAURO
UGANDA
for Grinder-dispenser (FUTURMAT-ARIETE) CT1 - CT2
MILADY - NEWFUTURSM - RIMINI
ASTORIA CMA 28500005
1251501
<|
|>
GRINDING BURRS PAIR COM PAK RH
ASTORIA CMA
1251504
<|
|>
external ø 60 mm - internal ø 36 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K5
1251707
|>
GRINDING BURRS PAIR ROSSI LH
ASTORIA CMA 28217000
1251093
<|
|>
BURRS "HEAVY DUTY" - duration increased by 70%
compared to a standard grinding burr
they do not deform
lower contamination of ground coffee
external ø 63,5 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
1251929
GRINDING BURRS W EGA-COM PAK (PAIR) RIGHT
ø external 80 mm - ø internal 41 mm
thickness 10 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K8
ASTORIA CMA
<|
GRINDING BURRS PAIR COM PAK-W EGA RH
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K5 - K6
ASTORIA CMA 28217006
<|
GRINDING BURRS PAIR ASTORIA-M AHLKONIG LH
external ø 65 mm - internal ø 38 mm
thickness 8.4 mm - 2 fixing holes
for Coffee grinder (ASTORIA CMA) K30
for Coffee grinder (MAHLKÖNIG) K30
for Coffee grinder (RENEKA) MK10
ASTORIA CMA 28217005
|>
SINGLE-PH. GRINDING BURRS PAIR M AZZER RH
external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) SUPERJOLLY
ASTORIA CMA 28213
<|
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
AZKOYEN
<
T
2
1251129
<|
|>
GRINDING BURRS PAIR AZKOYEN-DITTING LH
T
2
>
|>
<|
external ø 64 mm - internal ø 37 mm
thickness 8.6 mm - 3 mounting holes
for Coffee grinder (AZKOYEN) M2
for Coffee grinder (FUTURMAT-ARIETE) Q9
AZKOYEN 09710010
AZKOYEN 09710020
BEZZERA
<
T
2
1251702
<|
|>
GRINDING BURRS (PAIR) OBEL LH
1251062
<|
T
2
>
|>
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of milled coffee
ø external 63.5 mm - ø internal 37.5 mm
thickness 9 mm - 3 fixing holes
BEZZERA
1251061
<|
GRINDING BURRS OBEL (PAIR) LEFT
external ø 50 mm - internal ø 30 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (BEZZERA) BB004 - BB95
for Grinder-dispenser (CARIMALI) MJUNIOR
for Grinder-dispenser (FIAMMA RST) MCF2
for Grinder-dispenser (OBEL) JUNIOR
for Grinder-dispenser (SPAZIALE) JUNIOR
BEZZERA 0BDF8
|>
GRINDING BURRS OBEL-CARIM ALI (PAIR) LEFT
|>
<|
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (BEZZERA) BB003 - BB105
BB90
for Grinder-dispenser (CARIMALI) M1 - M3
for Grinder-dispenser (OBEL) DSQ - EB - MITO
for Grinder-dispenser (PAVONI) ZIP
for Grinder-dispenser (RENEKA) B14
BEZZERA 0BEB08
BIANCHI
<
T
2
1251164
<|
|>
GRINDING BURRS PAIR BIANCHI RH
1251165
<|
T
2
>
|>
external ø 64 mm - internal ø 37 mm
thickness 8.5 mm - 3 mounting holes
BIANCHI 18007316
BIANCHI 18007316-01
GRINDING BURRS PAIR BIANCHI RH
external ø 64 mm - internal ø 38 mm
thickness 8.5 mm - 3 mounting holes
BIANCHI 18007326
<T2
T2>
Grinders
Suitable for:
1251166
<|
Suitable for:
|>
GRINDING BURRS PAIR BIANCHI RH
1251167
<|
|>
external ø 54 mm - internal ø 31 mm
thickness 8 mm - 3 mounting holes
BIANCHI 18006616
BIANCHI 18006116
BRASILIA
<
T
2
1251050
<|
GRINDING BURRS PAIR BIANCHI RH
external ø 54 mm - internal ø 31 mm
thickness 8 mm - 3 mounting holes
|>
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
T
2
>
|>
<|
external ø 38/30 mm - internal ø 26/7 mm
thickness 17/20,3 mm
for Coffee grinder (ISOMAC) GRANMACININO
PROFESSIONALE - ROBY
for Grinder-dispenser (BRASILIA) FM
for Grinder-dispenser (IBERITAL) MINIMOLINO
for Grinder-dispenser (ROSSI) FM
BRASILIA 13659.3.00.04
1251076
<|
|>
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
external ø 68/49 mm - internal ø 41/13 mm
thickness 25 mm - 4 mounting holes
inner groove for feather key
for Grinder-dispenser (BRASILIA) MC
for Grinder-dispenser (CASADIO) GC98
for Grinder-dispenser (MACAP) M7K - M7KA - M7KT
for Grinder-dispenser (OBEL) MITOCONIC
for Grinder-dispenser (ROSSI) MC
BRASILIA 03603.3.00.04
1251016
<|
|>
GRINDING BURRS (PAIR) ROSSI LEFT
external ø 50 mm - internal ø 31 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (BRASILIA) BFD
for Grinder-dispenser (ROSSI) BFD
BRASILIA 00059.3.00.04
<T2
T2>
Grinders
Suitable for:
1251011
<|
Suitable for:
|>
GRINDING BURRS ASTRAL-ROSSI (PAIR) LEFT
1251017
<|
|>
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (BRASILIA) CC45 - RR45
RR55 - RR65 - R80
for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7
for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA
for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55
RR65 - R80
BRASILIA 00058.2.00.04
1251094
<|
|>
BRASILIA 00058.3.00.04
GRINDING BURRS PAIR ROSSI LH
BRASILIA 05617.3.00.04
1251707
<|
|>
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (BRASILIA) MAC64
for Grinder-dispenser (ROSSI) MAC64 - RR55OD
1251702
<|
GRINDING BURRS (PAIR) OBEL LH
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of milled coffee
ø external 63.5 mm - ø internal 37.5 mm
thickness 9 mm - 3 fixing holes
CARIMALI
BRASILIA
CARIMALI
|>
GRINDING BURRS PAIR ROSSI LH
BURRS "HEAVY DUTY" - duration increased by 70%
compared to a standard grinding burr
they do not deform
lower contamination of ground coffee
external ø 63,5 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
BRASILIA 19164.3.00.04
<
T
2
GRINDING BURRS BRASILIA (PAIR) LEFT
external ø 63 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (BRASILIA) VIP
<|
T
2
>
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
CARIMALI
<
T
2
1251062
<|
|>
GRINDING BURRS OBEL (PAIR) LEFT
1251114
<|
T
2
>
|>
external ø 50 mm - internal ø 30 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (BEZZERA) BB004 - BB95
for Grinder-dispenser (CARIMALI) MJUNIOR
for Grinder-dispenser (FIAMMA RST) MCF2
for Grinder-dispenser (OBEL) JUNIOR
for Grinder-dispenser (SPAZIALE) JUNIOR
CARIMALI 95.01485
1251061
<|
|>
GRINDING BURRS OBEL-CARIM ALI (PAIR) LEFT
GRINDING BURRS OBEL (PAIR) LEFT
external ø 75 mm - internal ø 43.6 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (CARIMALI) GT - G1
for Grinder-dispenser (OBEL) GLOBO "G"
CARIMALI 95.01324
|>
<|
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (BEZZERA) BB003 - BB105
BB90
for Grinder-dispenser (CARIMALI) M1 - M3
for Grinder-dispenser (OBEL) DSQ - EB - MITO
for Grinder-dispenser (PAVONI) ZIP
for Grinder-dispenser (RENEKA) B14
CARIMALI 95.00404
CASADIO
<
T
2
1251076
<|
|>
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
external ø 68/49 mm - internal ø 41/13 mm
thickness 25 mm - 4 mounting holes
inner groove for feather key
for Grinder-dispenser (BRASILIA) MC
for Grinder-dispenser (CASADIO) GC98
for Grinder-dispenser (MACAP) M7K - M7KA - M7KT
for Grinder-dispenser (OBEL) MITOCONIC
for Grinder-dispenser (ROSSI) MC
CASADIO 41008320002
1251191
<|
T
2
>
|>
GRINDING BURRS (PAIR) CASADIO RH
external ø 63 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Coffee grinder (CASADIO) ENEAONDEMAND
for Grinder-dispenser (CASADIO) ENEA
CASADIO 537060000
<T2
T2>
Grinders
Suitable for:
1251021
<|
Suitable for:
|>
GRINDING BURRS CASADIO (PAIR) LEFT
1251023
<|
|>
external ø 53 mm - internal ø 30 mm
thickness 8.5 mm - 3 fixing holes
for Grinder-dispenser (CASADIO) EXPORT
CASADIO 41005870002
1251022
<|
|>
CASADIO 41000390102
GRINDING BURRS CASADIO (PAIR) RIGHT
1251025
<|
|>
external ø 64 mm - internal ø 34.5 mm
thickness 10 mm - 2 fixing holes
for Grinder-dispenser (CASADIO) MOKABIX
1251187
CASADIO 41000760102
|>
GRINDING BURRS CASADIO/CIM BALI/FAEMA RH
1251189
<|
|>
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 fastening holes
for Grinder-dispenser (CASADIO) THEO64
for Grinder-dispenser (CIMBALI) 7S
for Grinder-dispenser (FAEMA) MD7S - ME64
1251110
|>
CASADIO 965157000
GRINDING BURRS PAIR CASADIO CONICAL RH
external ø 47/32 mm - internal ø 28/10 mm
thickness 20 mm
complete with star gasket
for Coffee grinder (CASADIO) ISTANTANEO
ISTANTANEONEW
CASADIO 40090890000
CASADIO 537046700
GRINDING BURRS PAIR CASADIO CONICA RH
external ø 68/49 mm - internal ø 42/11 mm
thickness 25 mm - 4 fastening holes
inner groove for feather
for Grinder-dispenser (CASADIO) THEOCONIC
CASADIO 537048800
<|
GRINDING BURRS CASADIO-ISA (PAIR) LEFT
external ø 84 mm - internal ø 45 mm
thickness 10.3 mm - 3 fixing holes
for Grinder-dispenser (CASADIO) G84 - MOKABIX
CASADIO
<|
GRINDING BURRS CASADIO (PAIR) LEFT
external ø 64 mm - internal ø 34.5 mm
thickness 10 mm - 2 fixing holes
for Grinder-dispenser (CASADIO) MOKABIX
CASADIO 41009030002
CASADIO 50160100100
1251188
<|
|>
GRINDING BURRS PAIR CASADIO RH
external ø 84 mm - internal ø 46 mm
thickness 9.3 mm - 3 fastening holes
for Grinder-dispenser (CASADIO) THEO84
CASADIO 537048900
<T2
T2>
Grinders
Suitable for:
Suitable for:
CIMBALI
<
T
2
1251135
<|
|>
GR.BURRS CIM BALI-FAEM A TITANIUM (PAIR) LH
T
2
>
|>
<|
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
CIMBALI 427-867-000
1251706
<|
|>
CIMBALI 463-727-000
GRIND.BURRS PAIR CIM BALI-FAEM A CONIC. RH
1251703
<|
|>
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of ground coffee
external ø 68/49 mm - internal ø 40/11 mm
thickness 25 mm - 4 fixing holes
CIMBALI
1251187
<|
CIMBALI
|>
GRINDING BURRS CASADIO/CIM BALI/FAEMA RH
1251031
<|
|>
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 fastening holes
for Grinder-dispenser (CASADIO) THEO64
for Grinder-dispenser (CIMBALI) 7S
for Grinder-dispenser (FAEMA) MD7S - ME64
1251032
|>
GRINDING BURRS CIM BALI (PAIR) RIGHT
CIMBALI
1251042
<|
external ø 64 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (CIMBALI) ALINOX - MD JUNIOR
CIMBALI 535-100-200
GRINDING BURRS CIM BALI (PAIR) RIGHT
external ø 54 mm - internal ø 32 mm
thickness 9 mm - 3 fixing holes
CIMBALI 537-048-800
<|
GRINDING BURRS (PAIR) CIM BALI/FAEM A RH
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of milled coffee
ø external 75 mm - ø internal 43.5 mm
thickness 9 mm - 3 fixing holes
|>
GRINDING BURRS CIM BALI-FAEM A (PAIR )LH
external ø 54 mm - internal ø 31 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (FAEMA) MPN
for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP
CIMBALI
<T2
T2>
Grinders
Suitable for:
1251043
<|
Suitable for:
|>
GRINDING BURRS CIM BALI-FAEM A (PAIR )LH
1251015
<|
|>
external ø 62 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP
CIMBALI
1251041
<|
CIMBALI 800-133-539
|>
GRINDING BURRS CIM BALI-FAEM A (PAIR) RH
1251044
<|
|>
external ø 54 mm - internal ø 31 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (FAEMA) MPN
1251046
|>
GRINDING BURRS CIM BALI-FAEM A(PAIR) RIGHT
1251170
|>
1251036
GRINDING BURRS DRM-ALINOX (PAIR) RIGHT
external ø 68 mm - internal ø 43 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (CIMBALI) ALINOX A
CIMBALI 803-130-050
GRINDING BURRS CIM BALI-FAEM A(PAIR) RIGHT
ø external 63,5 mm - ø internal 38 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (CIMBALI) MAGNUMONDEMAND
CIMBALI 4801-133-539
|>
GRINDING BURRS CIM BALI-FAEM A (PAIR) RH
CIMBALI 4801-119-956
<|
external ø 75 mm - internal ø 43.5 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (CIMBALI) MAGNUM
for Grinder-dispenser (FAEMA) MD2000
<|
CIMBALI 990-709-000
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (FAEMA) MD SILVER
CIMBALI 4801-116-730
<|
GRINDING BURRS CIM BALI-FAEM A (PAIR) RH
external ø 75 mm - internal ø 44 mm
thickness 9.4 mm - 3 fixing holes
for Grinder-dispenser (CIMBALI) MAGNUM
for Grinder-dispenser (FAEMA) MD3000
CIMBALI 537-041-300
1251045
<|
|>
CIMBALI 916-116-000
GRINDING BURRS FAEM A CONICAL (PAIR) RH
external ø 68/49 mm - internal ø 41/11 mm
thickness 25 mm - 4 fixing holes
for Grinder-dispenser (CIMBALI) CONIK
for Grinder-dispenser (FAEMA) MC90 - MC99
CIMBALI 2801-131-470
<T2
T2>
Grinders
Suitable for:
1251047
<|
Suitable for:
|>
GRINDING BURRS PAIR CIM BALI RH
|>
<|
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (CIMBALI) MD MAX
CIMBALI 803-130-055
COMPAK
<
T
2
1251142
<|
|>
CONICAL GRIND ING BURRS COM PAK (PAIR) RH
1251137
<|
T
2
>
|>
external ø 68/49 mm - internal ø 41/13 mm
thickness 25 mm - 4 mounting holes
for Grinder-dispenser (COMPAK) K10
COMPAK K.3068
1251138
<|
|>
COMPAK K.2054
GRINDING BURRS COM PAK (PAIR) RH
1251503
<|
|>
external ø 58 mm - internal ø 33 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K3
1251140
|>
COMPAK K...98
GRINDING BURRS COM PAK (PAIR) RIGHT
1251501
<|
external ø 82.5 mm - internal ø 49 mm
thickness 9.5 mm - 3 mounting holes
for Coffee grinder (COMPAK) A8
for Grinder-dispenser (COMPAK) K8
COMPAK K..812
GRINDING BURRS COM PAK (PAIR) RH
ø internal 43 mm - ø external 75 mm
thickness 10.5 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K7
COMPAK K.2058
<|
GRINDING BURRS COM PAK (PAIR) RH
external ø 54 mm - internal ø 32 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K3
|>
GRINDING BURRS PAIR COM PAK RH
external ø 60 mm - internal ø 36 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K5
COMPAK
<T2
T2>
Grinders
Suitable for:
1251504
<|
Suitable for:
|>
GRINDING BURRS PAIR COM PAK-W EGA RH
1251701
<|
|>
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K5 - K6
COMPAK K...99
1251092
<|
COMPAK
|>
GRINDING BURRS W EGA-COM PAK (PAIR) RIGHT
1251093
<|
|>
ø external 63 mm - ø internal 38 mm
thickness 9 mm - 3 fixing holes
5072455
GRINDING BURRS W EGA-COM PAK (PAIR) RIGHT
ø external 80 mm - ø internal 41 mm
thickness 10 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K8
COMPAK
COMPAK K..247
CUNILL
<
T
2
<|
GRINDING BURRS PAIR COM PAK-W EGA RH
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of ground coffee
external ø 63 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
|>
BURR PAIR CUNILL LH
T
2
>
|>
<|
ø external 59 mm - ø internal 34 mm
thickness 9 mm - 3 fastening holes
ORIGINAL
CUNILL MC0059/060
1251128
<|
|>
GRINDING BURRS CUNILL (PAIR) LEFT
1251634
<|
|>
external ø 65 mm - internal ø 30 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (ASTORIA CMA) C
for Grinder-dispenser (CUNILL) BIMOTOR - COSTARICA
ETIOPIA - HAWAI - HAWAI2 - MICHIGAN
MICHIGAN2008 - MOVIE2009 - NOBEL - SALSA2008
CUNILL 058/061MOL
CUNILL MC058/061
CUNILL 058MOL
CUNILL 061MOL
GRINDING BURRS CUNILL (PAIR) LEFT
external ø 59 mm - internal ø 34 mm
thickness 9 mm - 3 mounting holes
for Coffee grinder (CUNILL) ELCAFETRANQUILO
RUMBA
for Grinder-dispenser (ASTORIA CMA) C
for Grinder-dispenser (CUNILL) BRASIL - COLOMBIA
FULLMETAL - MARFIL - MEXICO - SPACE - TAURO
UGANDA
for Grinder-dispenser (FUTURMAT-ARIETE) CT1 - CT2
MILADY - NEWFUTURSM - RIMINI
CUNILL MC59/060
CUNILL 059/060MOL
CUNILL 060MOL
CUNILL MC0059/060
CUNILL 059MOL
<T2
T2>
Grinders
Suitable for:
Suitable for:
DITTING
<
T
2
1251125
<|
|>
GRIND.BURRS ASTORIA-M AHLKONIG(PAIR) LEFT
T
2
>
<|
|>
<|
|>
external ø 65 mm - internal ø 38 mm
thickness 8.4 mm - 2 mounting holes
for Coffee grinder (ASTORIA CMA) K30
for Grinder-dispenser (MAHLKÖNIG) K30
for Grinder-dispenser (RENEKA) MK10
DITTING
1251225
<|
|>
GRINDING BURRS PAIR ASTORIA-M AHLKONIG LH
external ø 65 mm - internal ø 38 mm
thickness 8.4 mm - 2 fixing holes
for Coffee grinder (ASTORIA CMA) K30
for Coffee grinder (MAHLKÖNIG) K30
for Coffee grinder (RENEKA) MK10
DITTING
DRM
<
T
2
1251032
<|
|>
GRINDING BURRS CIM BALI (PAIR) RIGHT
1251036
<|
external ø 64 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (CIMBALI) ALINOX - MD JUNIOR
DRM MA640009/0014
T
2
>
|>
GRINDING BURRS DRM-ALINOX (PAIR) RIGHT
external ø 68 mm - internal ø 43 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (CIMBALI) ALINOX A
DRM
<T2
T2>
Grinders
Suitable for:
Suitable for:
ELEKTRA
<
T
2
1251304
<|
|>
GRINDING BURRS M ACAP (PAIR) RIGHT
T
2
>
<|
|>
<|
|>
external ø 65 mm - internal ø 38 mm
thickness 8.5 mm - 3 fixing holes
for Coffee grinder (MACAP) MC6 - MC6T
for Grinder-dispenser (ELEKTRA) MX - MXA
for Grinder-dispenser (GAGGIA) MD64NEW
for Grinder-dispenser (MACAP) MX - MXA - MXT
for Grinder-dispenser (SPAZIALE) ASTRO12
ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
ELEKTRA C0004M122
1251310
<|
|>
GRINDING BURRS M ACAP (PAIR) RIGHT
external ø 74 mm - internal ø 42 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (ELEKTRA) MC7 - MC7T
for Grinder-dispenser (ELEKTRA) MXP - MXPC - M7
M7A - M7T
for Grinder-dispenser (GAGGIA) MD75
ELEKTRA C0004M121
EROS
<
T
2
1251037
<|
|>
GRINDING BURRS EROS CONICAL (PAIR) RIGHT
external ø 49/68 mm - internal ø 13/45 mm
thickness 25 mm
EROS
<|
T
2
>
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
ESPRESSO RESOURCE
<
T
2
1251050
<|
|>
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
1251016
<|
|>
external ø 38/30 mm - internal ø 26/7 mm
thickness 17/20,3 mm
for Coffee grinder (ISOMAC) GRANMACININO
PROFESSIONALE - ROBY
for Grinder-dispenser (BRASILIA) FM
for Grinder-dispenser (IBERITAL) MINIMOLINO
for Grinder-dispenser (ROSSI) FM
ESPRESSO RESOURCE 709
1251002
<|
|>
GRINDING BURRS ANFIM (PAIR) LEFT
ESPRESSO RESOURCE 8180
1251003
<|
|>
external ø 64 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (ANFIM) CAIMANO ON DEMAND
for Grinder-dispenser (ANFIM) CAIMANO - LUSSO
for Grinder-dispenser (SPAZIALE) LUX800
1251011
|>
GRINDING BURRS ASTRAL-ROSSI (PAIR) LEFT
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (BRASILIA) CC45 - RR45
RR55 - RR65 - R80
for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7
for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA
for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55
RR65 - R80
ESPRESSO RESOURCE 4865
GRINDING BURRS ANFIN (PAIR) LH
external ø 75 mm - internal ø 43 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (ANFIM)
CAIMANO SPECIAL450 AUTOMATICO
CAIMANO SPECIAL450 TIMER
SPECIAL450 AUTOMATICO - SPECIAL450 TIMER
SUPER CAIMANO - SUPERLUSSO
for Grinder-dispenser (SPAZIALE) S/LUX450
ESPRESSO RESOURCE 6092
<|
GRINDING BURRS (PAIR) ROSSI LEFT
external ø 50 mm - internal ø 31 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (BRASILIA) BFD
for Grinder-dispenser (ROSSI) BFD
ESPRESSO RESOURCE 6869
1251128
<|
|>
GRINDING BURRS CUNILL (PAIR) LEFT
external ø 65 mm - internal ø 30 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (ASTORIA CMA) C
for Grinder-dispenser (CUNILL) BIMOTOR - COSTARICA
ETIOPIA - HAWAI - HAWAI2 - MICHIGAN
MICHIGAN2008 - MOVIE2009 - NOBEL - SALSA2008
ESPRESSO RESOURCE 6048
T
2
>
<T2
T2>
Grinders
Suitable for:
1251634
<|
Suitable for:
|>
GRINDING BURRS CUNILL (PAIR) LEFT
1251084
<|
|>
external ø 59 mm - internal ø 34 mm
thickness 9 mm - 3 mounting holes
for Coffee grinder (CUNILL) ELCAFETRANQUILO
RUMBA
for Grinder-dispenser (ASTORIA CMA) C
for Grinder-dispenser (CUNILL) BRASIL - COLOMBIA
FULLMETAL - MARFIL - MEXICO - SPACE - TAURO
UGANDA
for Grinder-dispenser (FUTURMAT-ARIETE) CT1 - CT2
MILADY - NEWFUTURSM - RIMINI
ESPRESSO RESOURCE 5800
1251302
<|
|>
ESPRESSO RESOURCE 897
GRINDING BURRS M ACAP (PAIR) RIGHT
ESPRESSO RESOURCE 12287
1251304
<|
|>
external ø 68 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (SPAZIALE) M900 - M900A
M900T
1251310
|>
GRINDING BURRS M ACAP (PAIR) RIGHT
ESPRESSO RESOURCE 12297
1251501
<|
|>
external ø 74 mm - internal ø 42 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (ELEKTRA) MC7 - MC7T
for Grinder-dispenser (ELEKTRA) MXP - MXPC - M7
M7A - M7T
for Grinder-dispenser (GAGGIA) MD75
1251504
|>
GRINDING BURRS PAIR COM PAK-W EGA RH
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K5 - K6
ESPRESSO RESOURCE 9081
GRINDING BURRS PAIR COM PAK RH
external ø 60 mm - internal ø 36 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K5
ESPRESSO RESOURCE 12298
<|
GRINDING BURRS M ACAP (PAIR) RIGHT
external ø 65 mm - internal ø 38 mm
thickness 8.5 mm - 3 fixing holes
for Coffee grinder (MACAP) MC6 - MC6T
for Grinder-dispenser (ELEKTRA) MX - MXA
for Grinder-dispenser (GAGGIA) MD64NEW
for Grinder-dispenser (MACAP) MX - MXA - MXT
for Grinder-dispenser (SPAZIALE) ASTRO12
ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
ESPRESSO RESOURCE 12299
<|
GRINDING BURRS FIORENZATO CS (PAIR) RH
external ø 83 mm - internal ø 45 mm
thickness 10 mm - 3 mounting holes
for Grinder-dispenser (FIORENZATO C.S.) DOGE83
for Grinder-dispenser (VIBIEMME) VB83
ESPRESSO RESOURCE 2643
1251087
<|
|>
GRINDING BURRS SAN M ARCO (PAIR) RH
external ø 84 mm - internal ø 45 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (SAN MARCO) SM95 - SM95A
SM96 - SM97
ESPRESSO RESOURCE 8185
<T2
T2>
Grinders
Suitable for:
1251093
<|
Suitable for:
|>
GRINDING BURRS W EGA-COM PAK (PAIR) RIGHT
|>
<|
ø external 80 mm - ø internal 41 mm
thickness 10 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K8
ESPRESSO RESOURCE 10194
EUREKA
<
T
2
1251038
<|
|>
CONICAL GRIND ING BURRS EUREKA (PAIR) RH
1251070
<|
T
2
>
|>
external ø 68/49 mm - internal ø 45/13 mm
thickness 25 mm - 4 fixing holes
for Grinder-dispenser (EUREKA) LUSSO MDLCA/C
for Grinder-dispenser (NUOVA SIMONELLI) MDLCA/C
EUREKA E-13/68
1251073
<|
|>
EUREKA E-13/68CP
GRINDING BURRS EUREKA (PAIR) RH
EUREKA MAC70CP
1251060
<|
|>
external ø 85 mm - internal ø 37 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (EUREKA) MCD
EUREKA MAC85
1251068
<|
GRINDING BURRS EUREKA (PAIR) RIGHT
EUREKA MAC74
1251074
<|
external ø 60 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (EUREKA) MDMEA
EUREKA MAC60
EUREKA MAC60CP
GRINDING BURRS EUREKA (PAIR) RIGHT
external ø 74 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (EUREKA) LUSSO MDLCA75
LUSSO MDML
for Grinder-dispenser (NUOVA SIMONELLI) MDL
MDLCA
EUREKA MAC85CP
|>
GRINDING BURRS EUREKA (PAIR) RH
external ø 70 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (EUREKA) MONDIALMDM
EUREKA MAC74CP
|>
EUREKA MAC75
GRINDING BURRS EUREKA (PAIR) RIGHT
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (EUREKA) MDLCA - MDMCA
for Grinder-dispenser (NUOVA SIMONELLI) MDX - MDXA
EUREKA MAC64
EUREKA MAC65
EUREKA MAC64CP
EUREKA MAC64TR
<T2
T2>
Grinders
Suitable for:
1251069
<|
Suitable for:
|>
GRINDING BURRS EUREKA PAIR RH
|>
<|
ø external 50 mm - ø internal 30 mm
thickness 7.5 mm - 3 mounting holes
for Grinder-dispenser (EUREKA) MCF
for Grinder-dispenser (NUOVA SIMONELLI) MCF
EUREKA MAC50
EUREKA MAC50CP
FAEMA
<
T
2
1251135
<|
|>
GR.BURRS CIM BALI-FAEM A TITANIUM (PAIR) LH
1251706
<|
T
2
>
|>
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
FAEMA 427867000
1251703
<|
|>
FAEMA 463727000
GRINDING BURRS (PAIR) CIM BALI/FAEM A RH
FAEMA
1251187
<|
|>
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of milled coffee
ø external 75 mm - ø internal 43.5 mm
thickness 9 mm - 3 fixing holes
1251042
FAEMA 537048800
|>
GRINDING BURRS CIM BALI-FAEM A (PAIR )LH
1251043
<|
external ø 54 mm - internal ø 31 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (FAEMA) MPN
for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP
FAEMA
GRINDING BURRS CASADIO/CIM BALI/FAEMA RH
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 fastening holes
for Grinder-dispenser (CASADIO) THEO64
for Grinder-dispenser (CIMBALI) 7S
for Grinder-dispenser (FAEMA) MD7S - ME64
FAEMA
<|
GRIND.BURRS PAIR CIM BALI-FAEM A CONIC. RH
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of ground coffee
external ø 68/49 mm - internal ø 40/11 mm
thickness 25 mm - 4 fixing holes
|>
GRINDING BURRS CIM BALI-FAEM A (PAIR )LH
external ø 62 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP
FAEMA
<T2
T2>
Grinders
Suitable for:
1251015
<|
Suitable for:
|>
GRINDING BURRS CIM BALI-FAEM A (PAIR) RH
1251041
<|
|>
external ø 75 mm - internal ø 44 mm
thickness 9.4 mm - 3 fixing holes
for Grinder-dispenser (CIMBALI) MAGNUM
for Grinder-dispenser (FAEMA) MD3000
FAEMA 990709000
1251044
<|
|>
FAEMA 4801116730
GRINDING BURRS CIM BALI-FAEM A (PAIR) RH
1251046
<|
|>
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (FAEMA) MD SILVER
1251170
|>
FAEMA 4801133539
GRINDING BURRS CIM BALI-FAEM A(PAIR) RIGHT
1251045
<|
|>
ø external 63,5 mm - ø internal 38 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (CIMBALI) MAGNUMONDEMAND
1251011
FAEMA 2801131470
FIAMMA RST
|>
GRINDING BURRS FAEM A CONICAL (PAIR) RH
external ø 68/49 mm - internal ø 41/11 mm
thickness 25 mm - 4 fixing holes
for Grinder-dispenser (CIMBALI) CONIK
for Grinder-dispenser (FAEMA) MC90 - MC99
FAEMA 537041300
<
T
2
<|
GRINDING BURRS CIM BALI-FAEM A(PAIR) RIGHT
external ø 75 mm - internal ø 43.5 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (CIMBALI) MAGNUM
for Grinder-dispenser (FAEMA) MD2000
FAEMA 4801119956
<|
GRINDING BURRS CIM BALI-FAEM A (PAIR) RH
external ø 54 mm - internal ø 31 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (FAEMA) MPN
GRINDING BURRS ASTRAL-ROSSI (PAIR) LEFT
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (BRASILIA) CC45 - RR45
RR55 - RR65 - R80
for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7
for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA
for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55
RR65 - R80
FIAMMA RST 5.0.052.4435
<|
T
2
>
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
FIAMMA RST
<
T
2
1251062
<|
|>
GRINDING BURRS OBEL (PAIR) LEFT
1251707
<|
T
2
>
|>
external ø 50 mm - internal ø 30 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (BEZZERA) BB004 - BB95
for Grinder-dispenser (CARIMALI) MJUNIOR
for Grinder-dispenser (FIAMMA RST) MCF2
for Grinder-dispenser (OBEL) JUNIOR
for Grinder-dispenser (SPAZIALE) JUNIOR
FIAMMA RST 5.0.051.008F
1251088
FIAMMA RST
FIORENZATO C.S.
<
T
2
<|
GRINDING BURRS PAIR ROSSI LH
BURRS "HEAVY DUTY" - duration increased by 70%
compared to a standard grinding burr
they do not deform
lower contamination of ground coffee
external ø 63,5 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
|>
GR.BURRS FIORENZATO CS (PAIR) CONICAL RH
|>
<|
external ø 71/49 mm - internal ø 41/13 mm
thickness 25 mm - 3 mounting holes
for Grinder-dispenser (FIORENZATO C.S.) DOGECONICO
FIORENZATO C.S. A3200018
1251084
<|
|>
GRINDING BURRS FIORENZATO CS (PAIR) RH
external ø 83 mm - internal ø 45 mm
thickness 10 mm - 3 mounting holes
for Grinder-dispenser (FIORENZATO C.S.) DOGE83
for Grinder-dispenser (VIBIEMME) VB83
FIORENZATO C.S. A3200083
1251078
<|
|>
GRINDING BURRS FIORENZATO CS RIGHT
external ø 63 mm - internal ø 38 mm
thickness 9.5 mm - 3 mounting holes
for Grinder-dispenser (FIORENZATO C.S.) DOGE63
for Grinder-dispenser (QUAMAR) M1 - M80 - T80
T80D
for Grinder-dispenser (VIBIEMME) VB63
FIORENZATO C.S. A3200063
T
2
>
<T2
T2>
Grinders
Suitable for:
Suitable for:
FIORENZATO M.C.
<
T
2
1251030
<|
|>
GRINDING BURRS FIORENZATO M C (PAIR) RH
<|
|>
<|
|>
T
2
>
external ø 64 mm - internal ø 37 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (FIORENZATO M.C.) F5
FIORENZATO M.C. 001.002.034
1251033
<|
|>
FIORENZATO M.C. 400000005
GRINDING BURRS FIORENZATO M C (PAIR) RH
external ø 82.5 mm - internal ø 49 mm
thickness 9.5 mm - 3 mounting holes
for Grinder-dispenser (FIORENZATO M.C.) F6
FIORENZATO M.C. 001.002.030
FIORENZATO M.C. 400000004
FUTURMAT-ARIETE
<
T
2
1251042
<|
|>
GRINDING BURRS CIM BALI-FAEM A (PAIR )LH
1251043
<|
|>
external ø 54 mm - internal ø 31 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (FAEMA) MPN
for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP
FUTURMAT-ARIETE 00896209
1251634
<|
|>
GRINDING BURRS CUNILL (PAIR) LEFT
external ø 59 mm - internal ø 34 mm
thickness 9 mm - 3 mounting holes
for Coffee grinder (CUNILL) ELCAFETRANQUILO
RUMBA
for Grinder-dispenser (ASTORIA CMA) C
for Grinder-dispenser (CUNILL) BRASIL - COLOMBIA
FULLMETAL - MARFIL - MEXICO - SPACE - TAURO
UGANDA
for Grinder-dispenser (FUTURMAT-ARIETE) CT1 - CT2
MILADY - NEWFUTURSM - RIMINI
FUTURMAT-ARIETE 26000059/060
GRINDING BURRS CIM BALI-FAEM A (PAIR )LH
external ø 62 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (FUTURMAT-ARIETE) FM - FP
FUTURMAT-ARIETE 00888008
<|
|>
T
2
>
<T2
T2>
Grinders
Suitable for:
Suitable for:
GAGGIA
<
T
2
1251146
<|
|>
CERAM IC GRINDING BURRS SAECO (PAIR) LEFT
1251098
<|
T
2
>
|>
external ø 48 mm - internal ø 28 mm
thickness 6.5 mm
GAGGIA 146520100
1251199
<|
|>
CONICAL GRIND .BURRS PAIR SAECO-GAGGIA RH
GAGGIA 226477700
1251006
<|
|>
ø external 47.8/31.7 mm - ø internal 28/10 mm
thickness 20 mm
1251007
|>
GRINDING BURRS ARISTARCO-GAGGIA(PAIR) RH
GAGGIA
1251014
<|
|>
external ø 84 mm - internal ø 45 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (ARISTARCO) EMA80
for Grinder-dispenser (GAGGIA) MD85
for Grinder-dispenser (SAECO) MS85
1251304
|>
GRINDING BURRS ARISTARCO-GAGGIA(PAIR) RH
external ø 74 mm - internal ø 42.5 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (ARISTARCO) EMA80
GAGGIA MDB0248
<|
GRINDING BURRS ARISTARCO-GAGGIA(PAIR) RH
external ø 58 mm - internal ø 34 mm
thickness 8 mm - 3 mounting holes
GAGGIA 226477700
<|
CONIC.GRIND.BURRS SAECO-GAGGIA (PAIR) RH
external ø 47.8/31.7 mm - internal ø 28/10 mm
thickness 20 mm
GAGGIA
GRINDING BURRS M ACAP (PAIR) RIGHT
external ø 65 mm - internal ø 38 mm
thickness 8.5 mm - 3 fixing holes
for Coffee grinder (MACAP) MC6 - MC6T
for Grinder-dispenser (ELEKTRA) MX - MXA
for Grinder-dispenser (GAGGIA) MD64NEW
for Grinder-dispenser (MACAP) MX - MXA - MXT
for Grinder-dispenser (SPAZIALE) ASTRO12
ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
GAGGIA 4931C0004M122
1251308
<|
|>
GRINDING BURRS M ACAP (PAIR) RIGHT
external ø 58 mm - internal ø 34 mm
thickness 8.5 mm - 3 fixing holes
for Coffee grinder (MACAP) MC4 - MC4T - MC5 - MC5T
for Grinder-dispenser (MACAP) MD58COMPACT - M4
M4A - M4T - M5 - M5A - M5T
GAGGIA 4931C0004M135
<T2
T2>
Grinders
Suitable for:
1251310
<|
Suitable for:
|>
GRINDING BURRS M ACAP (PAIR) RIGHT
1251173
<|
|>
external ø 74 mm - internal ø 42 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (ELEKTRA) MC7 - MC7T
for Grinder-dispenser (ELEKTRA) MXP - MXPC - M7
M7A - M7T
for Grinder-dispenser (GAGGIA) MD75
GAGGIA 4931C0004M121
1251631
GAGGIA 9141.072
GAGGIA SPAGNA
<
T
2
<|
GRINDING BURRS PAIR SAECO/GAGGIA RH
external ø 64 mm - internal ø 37 mm
thickness 8.5 mm - 3 fixing holes
|>
GRINDING BURRS GAGGIA SPAGNA (PAIR) LEFT
T
2
>
|>
<|
ø external 63,5 mm - ø internal 34 mm
thickness 10,5 mm - 2 fixing holes
GAGGIA SPAGNA
1251632
<|
|>
GRINDING BURRS GAGGIA SPAGNA (PAIR) LEFT
1251633
<|
|>
ø external 59 mm - ø internal 33 mm
thickness 9,5 mm - 3 fixing holes
GAGGIA SPAGNA
GAGGIA SPAGNA
ISOMAC
<
T
2
1251050
<|
|>
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
external ø 38/30 mm - internal ø 26/7 mm
thickness 17/20,3 mm
for Coffee grinder (ISOMAC) GRANMACININO
PROFESSIONALE - ROBY
for Grinder-dispenser (BRASILIA) FM
for Grinder-dispenser (IBERITAL) MINIMOLINO
for Grinder-dispenser (ROSSI) FM
ISOMAC IS000437
GRINDING BURRS GAGGIA SPAGNA (PAIR) LEFT
ø external 53 mm - ø internal 30 mm
thisckness 9 mm - 3 fixing holes
<|
T
2
>
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
MACAP
<
T
2
1251101
<|
|>
CONICAL GRIND ING BURRS M ACAP(PAIR) RIGHT
1251076
<|
T
2
>
|>
external ø 63/40 mm - internal ø 33/13 mm
thickness 23 mm - 3 mounting holes
for Grinder-dispenser (MACAP) MXK - MXKA - MXKT
for Grinder-dispenser (SPAZIALE) ASTRO8/CA
MACAP C0004M122B
1251097
<|
|>
MACAP C0004M121B
GRINDING BURRS M ACAP (PAIR) RIGHT
1251302
<|
|>
external ø 74 mm - internal ø 43 mm
height 9 mm - 3 mounting holes
for Grinder-dispenser (MACAP) M7A900 - M7T900
M7900
1251304
|>
MACAP C0004M123
GRINDING BURRS M ACAP (PAIR) RIGHT
1251308
<|
|>
external ø 65 mm - internal ø 38 mm
thickness 8.5 mm - 3 fixing holes
for Coffee grinder (MACAP) MC6 - MC6T
for Grinder-dispenser (ELEKTRA) MX - MXA
for Grinder-dispenser (GAGGIA) MD64NEW
for Grinder-dispenser (MACAP) MX - MXA - MXT
for Grinder-dispenser (SPAZIALE) ASTRO12
ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
1251310
|>
MACAP C0004M135
GRINDING BURRS M ACAP (PAIR) RIGHT
external ø 74 mm - internal ø 42 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (ELEKTRA) MC7 - MC7T
for Grinder-dispenser (ELEKTRA) MXP - MXPC - M7
M7A - M7T
for Grinder-dispenser (GAGGIA) MD75
MACAP
GRINDING BURRS M ACAP (PAIR) RIGHT
external ø 58 mm - internal ø 34 mm
thickness 8.5 mm - 3 fixing holes
for Coffee grinder (MACAP) MC4 - MC4T - MC5 - MC5T
for Grinder-dispenser (MACAP) MD58COMPACT - M4
M4A - M4T - M5 - M5A - M5T
MACAP C0004M122
<|
GRINDING BURRS M ACAP (PAIR) RIGHT
external ø 68 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (SPAZIALE) M900 - M900A
M900T
MACAP C0004M121A
<|
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
external ø 68/49 mm - internal ø 41/13 mm
thickness 25 mm - 4 mounting holes
inner groove for feather key
for Grinder-dispenser (BRASILIA) MC
for Grinder-dispenser (CASADIO) GC98
for Grinder-dispenser (MACAP) M7K - M7KA - M7KT
for Grinder-dispenser (OBEL) MITOCONIC
for Grinder-dispenser (ROSSI) MC
MACAP C0004M121
1251095
<|
|>
GRINDING BURRS PAIR MACAP RH
external ø 58 mm - internal ø 34 mm
height 8.5 mm - 3 mounting holes
for Grinder-dispenser (MACAP) M4D - M5D
MACAP C0004M135A
<T2
T2>
Grinders
Suitable for:
1251104
<|
Suitable for:
|>
GRINDING BURRS PAIR MACAP RH
|>
<|
external ø 64.6 mm - internal ø 38 mm
height 8.6 mm - 3 mounting holes
for Grinder-dispenser (MACAP) MXA900 - MXT900
MX900
MACAP C0004M122A
MAHLKÖNIG
<
T
2
1251125
<|
|>
GRIND.BURRS ASTORIA-M AHLKONIG(PAIR) LEFT
1251225
<|
T
2
>
|>
external ø 65 mm - internal ø 38 mm
thickness 8.4 mm - 2 mounting holes
for Coffee grinder (ASTORIA CMA) K30
for Grinder-dispenser (MAHLKÖNIG) K30
for Grinder-dispenser (RENEKA) MK10
MAHLKÖNIG
MAHLKÖNIG
MARCFI-ANCAS
<
T
2
1251501
<|
GRINDING BURRS PAIR ASTORIA-M AHLKONIG LH
external ø 65 mm - internal ø 38 mm
thickness 8.4 mm - 2 fixing holes
for Coffee grinder (ASTORIA CMA) K30
for Coffee grinder (MAHLKÖNIG) K30
for Coffee grinder (RENEKA) MK10
|>
GRINDING BURRS PAIR COM PAK RH
|>
<|
external ø 60 mm - internal ø 36 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K5
MARCFI-ANCAS K-246
1251504
<|
|>
GRINDING BURRS PAIR COM PAK-W EGA RH
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K5 - K6
MARCFI-ANCAS K-99
1251093
<|
|>
GRINDING BURRS W EGA-COM PAK (PAIR) RIGHT
ø external 80 mm - ø internal 41 mm
thickness 10 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K8
MARCFI-ANCAS K-247
T
2
>
<T2
T2>
Grinders
Suitable for:
Suitable for:
MAZZER
<
T
2
1251020
<|
|>
CON.GR.BURRS M AZZER (PAIR) RH SINGLE-PH.
T
2
>
|>
<|
external ø 63/40 mm - internal ø 40/12 mm
thickness 23 mm - 3 mounting holes
inner grooving for feather
for Grinder-dispenser (MAZZER) KONY
KONY ELETTRONICO
MAZZER FMA00191C-C
1251914
<|
|>
MAZZER FMA00191C/A
CON.GR.BURRS M AZZER (PAIR) RH SINGLE-PH.
1251026
<|
|>
external ø 71/49 mm - internal ø 41/14 mm
thickness 25 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) ROBUR
ROBUR ELETTRONICO
MAZZER FMA00186C
1251913
<|
|>
MAZZER FMA00186C-C
CON.GR.BURRS M AZZER (PAIR) RH THREE-PH.
MAZZER FMA00192C
1251116
<|
|>
external ø 83/59 mm - internal ø 52/14 mm
thickness 25 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) ROBUR
MAZZER FMA00187C
1251118
<|
|>
external ø 83 mm - internal ø 49 mm
thickness 9.6 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) MAJOR
MAJOR ELETTRONICO
MAZZER FMA00151A
MAZZER FMA00192C-C
GRIND.BURRS M AZZER (PAIR) RH SINGLE-PH.
external ø 70 mm - internal ø 40 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) M100
MAZZER FMA00187C-C
GRIND.BURRS M AZZER (PAIR) RH SINGLE-PH.
CON.GR.BURRS M AZZER (PAIR) RH THREE-PH.
external ø 67/44.5 mm - internal ø 44.5/14 mm
thickness 23 mm - 3 mounting holes
inner grooving for feather key
for Grinder-dispenser (MAZZER) KONY
MAZZER FMA00175M
1251927
<|
|>
GRIND.BURRS M AZZER (PAIR) RH SINGLE-PH.
external ø 83 mm - internal ø 49 mm
thickness 9.6 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) MAJOR
MAJOR ELETTRONICO
MAZZER FMA00151D
MAZZER FMA00151A
<T2
T2>
Grinders
Suitable for:
1251935
<|
Suitable for:
|>
GRIND.BURRS M AZZER (PAIR) RH SINGLE-PH.
1251056
<|
|>
external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) SUPERJOLLY
MAZZER FMA00033M
1251117
<|
|>
GRIND.BURRS M AZZER (PAIR) RH THREE-PH.
MAZZER FMA00033T
1251928
<|
|>
external ø 70 mm - internal ø 40 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) M100
1251930
|>
GRIND.BURRS M AZZER (PAIR) RH THREE-PH.
MAZZER FMA00151C
1251933
<|
|>
external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) SUPERJOLLY
1251179
|>
GRIND.BURRS(PAIR) M AZZER 1-PHASE CON.RH
external ø 63/40 mm - internal ø 40/12 mm
thickness 23 mm - 3 mounting holes
inner groove for feather
for Grinder-dispenser (MAZZER) KONY
KONY ELETTRONICO
MAZZER FMA00191C/C
GRIND.BURRS M AZZER (PAIR) RIGHT THREE-PH
external ø 83 mm - internal ø 49 mm
thickness 9.6 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) MAJOR - ROYAL
ROYAL ELETTRONICO - STARK
MAZZER FMA00033T
<|
GRIND.BURRS M AZZER (PAIR) RH THREE-PH.
external ø 83 mm - internal ø 49 mm
thickness 9.6 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) MAJOR - ROYAL
ROYAL ELETTRONICO - STARK
MAZZER FMA00175T
<|
GRIND.BURRS M AZZER (PAIR) RH THREE-PH.
external ø 64 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) SUPERJOLLY
MAZZER FMA00151M
1251180
<|
|>
MAZZER FMA00151B
GRIND.BURRS(PAIR) M AZZER 3-PHASE CON.RH
external ø 67/44.5 mm - internal ø 44.5/14 mm
thickness 23 mm - 3 mounting holes
inner groove for feather
for Grinder-dispenser (MAZZER) KONY
MAZZER FMA00192C-C
<T2
T2>
Grinders
Suitable for:
1251178
<|
Suitable for:
|>
GRIND.BURRS(PAIR) M AZZER 3-PHASE RH
5019960
<|
|>
external ø 83 mm - internal ø 49 mm
thickness 9.6 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) MAJOR - ROYAL
ROYAL ELETTRONICO - STARK
MAZZER FMA00151B
1251181
<|
|>
GRIND.BURRS(PAIR) 1-PHASE M AZZER CON.RH
MAZZER FMA00174T
1251215
<|
|>
external ø 71/49 mm - internal ø 41/14 mm
thickness 25 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) ROBUR
ROBUR ELETTRONICO
1251704
|>
GRINDING BURRS (PAIR) M AZZER SINGLE-PH R
MAZZER
1251700
<|
|>
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of milled coffee
ø external 83 mm - ø internal 49 mm
thickness 9.5 mm - 3 fixing holes
1251115
GRINDING BURRS (PAIR) M AZZER 1-PHASE RH
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of milled coffee
ø external 64 mm - ø internal 38 mm
thickness 8.5 mm - 3 fixing holes
MAZZER
<|
GRINDING BURRS (PAIR) M AZZER RH
external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) MINI ELETTRONICO A
MINI ELETTRONICO B
MAZZER FMA00186C-C
<|
GRIND.BURRS(PAIR) M AZZER 3-PHASE RH
external ø 115 mm - internal ø 68 mm
thickness 12 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) M1000
MAZZER
|>
GRINDING BURRS M AZZER (PAIR) RH
1251215
<|
external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) MINIELETTRONICO A
MINIELETTRONICO B
MAZZER FMA00189D
|>
GRINDING BURRS (PAIR) M AZZER RH
external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 mounting holes
for Grinder-dispenser (MAZZER) MINI ELETTRONICO A
MINI ELETTRONICO B
MAZZER
<T2
T2>
Grinders
Suitable for:
1251915
<|
Suitable for:
|>
GRINDING BURRS M AZZER (PAIR) RH
5019959
<|
|>
external ø 58 mm - internal ø 33.5 mm
thickness 8.5 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) MINI
MAZZER FMA00182D
1251929
<|
|>
MAZZER FMA00174M
SINGLE-PH. GRINDING BURRS PAIR M AZZER RH
1251201
<|
|>
external ø 64 mm - internal ø 37 mm
thickness 8.4 mm - 3 fixing holes
for Grinder-dispenser (MAZZER) SUPERJOLLY
1251705
|>
SINGLE-PH.CONIC.GRIN.BURR PAIR M AZZER RH
GRIND.BURRS "HEAVY DUTY"-lifespan increased by 70%
compared to a standard grinding burr
they do not deform
less contamination of ground coffee
external ø 71/49 mm - internal ø 41/14 mm
thickness 25 mm - 3 fixing holes
MAZZER FMA00033M
<|
PAIR OF BURRS M AZZER SINGLE-PHASE RH
external ø 115 mm - internal ø 68 mm
12 mm thickness - 3 fastening holes
for Grinder-dispenser (MAZZER) M1000
MAZZER
3-PHASE CONIC.GRIND.BURRS PAIR MAZZER RH
|>
<|
GRIND.BURRS "HEAVY DUTY" +70% longer service life
compared to a standard grinding burr
they do not deform
lower contamination of ground coffee
external ø 83/59 mm - internal ø 50/14 mm
thickness 25 mm - 3 fixing holes
MAZZER FMA00187C-C
NUOVA SIMONELLI
<
T
2
1251038
<|
|>
CONICAL GRIND ING BURRS EUREKA (PAIR) RH
external ø 68/49 mm - internal ø 45/13 mm
thickness 25 mm - 4 fixing holes
for Grinder-dispenser (EUREKA) LUSSO MDLCA/C
for Grinder-dispenser (NUOVA SIMONELLI) MDLCA/C
NUOVA SIMONELLI 15070001
1251076
<|
|>
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
external ø 68/49 mm - internal ø 41/13 mm
thickness 25 mm - 4 mounting holes
inner groove for feather key
for Grinder-dispenser (BRASILIA) MC
for Grinder-dispenser (CASADIO) GC98
for Grinder-dispenser (MACAP) M7K - M7KA - M7KT
for Grinder-dispenser (OBEL) MITOCONIC
for Grinder-dispenser (ROSSI) MC
NUOVA SIMONELLI 15020001
T
2
>
<T2
T2>
Grinders
Suitable for:
1251011
<|
Suitable for:
|>
GRINDING BURRS ASTRAL-ROSSI (PAIR) LEFT
1251060
<|
|>
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (BRASILIA) CC45 - RR45
RR55 - RR65 - R80
for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7
for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA
for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55
RR65 - R80
NUOVA SIMONELLI 15010030
1251074
<|
|>
GRINDING BURRS EUREKA (PAIR) RIGHT
NUOVA SIMONELLI 15080002
1251069
<|
|>
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (EUREKA) MDLCA - MDMCA
for Grinder-dispenser (NUOVA SIMONELLI) MDX - MDXA
1251707
|>
GRINDING BURRS PAIR ROSSI LH
GRINDING BURRS EUREKA PAIR RH
ø external 50 mm - ø internal 30 mm
thickness 7.5 mm - 3 mounting holes
for Grinder-dispenser (EUREKA) MCF
for Grinder-dispenser (NUOVA SIMONELLI) MCF
NUOVA SIMONELLI 15050001
<|
GRINDING BURRS EUREKA (PAIR) RIGHT
external ø 74 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (EUREKA) LUSSO MDLCA75
LUSSO MDML
for Grinder-dispenser (NUOVA SIMONELLI) MDL
MDLCA
NUOVA SIMONELLI 15800039
NUOVA SIMONELLI 15800045
|>
<|
BURRS "HEAVY DUTY" - duration increased by 70%
compared to a standard grinding burr
they do not deform
lower contamination of ground coffee
external ø 63,5 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
NUOVA SIMONELLI
OBEL
<
T
2
1251076
<|
|>
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
1251702
<|
external ø 68/49 mm - internal ø 41/13 mm
thickness 25 mm - 4 mounting holes
inner groove for feather key
for Grinder-dispenser (BRASILIA) MC
for Grinder-dispenser (CASADIO) GC98
for Grinder-dispenser (MACAP) M7K - M7KA - M7KT
for Grinder-dispenser (OBEL) MITOCONIC
for Grinder-dispenser (ROSSI) MC
OBEL MT08K
T
2
>
|>
GRINDING BURRS (PAIR) OBEL LH
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of milled coffee
ø external 63.5 mm - ø internal 37.5 mm
thickness 9 mm - 3 fixing holes
OBEL
<T2
T2>
Grinders
Suitable for:
1251062
<|
Suitable for:
|>
GRINDING BURRS OBEL (PAIR) LEFT
1251114
<|
|>
external ø 50 mm - internal ø 30 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (BEZZERA) BB004 - BB95
for Grinder-dispenser (CARIMALI) MJUNIOR
for Grinder-dispenser (FIAMMA RST) MCF2
for Grinder-dispenser (OBEL) JUNIOR
for Grinder-dispenser (SPAZIALE) JUNIOR
OBEL DF8
1251061
<|
GRINDING BURRS OBEL (PAIR) LEFT
external ø 75 mm - internal ø 43.6 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (CARIMALI) GT - G1
for Grinder-dispenser (OBEL) GLOBO "G"
OBEL EB08/75
|>
GRINDING BURRS OBEL-CARIM ALI (PAIR) LEFT
<|
|>
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (BEZZERA) BB003 - BB105
BB90
for Grinder-dispenser (CARIMALI) M1 - M3
for Grinder-dispenser (OBEL) DSQ - EB - MITO
for Grinder-dispenser (PAVONI) ZIP
for Grinder-dispenser (RENEKA) B14
OBEL EB08
PAVONI
<
T
2
1251061
<|
|>
GRINDING BURRS OBEL-CARIM ALI (PAIR) LEFT
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (BEZZERA) BB003 - BB105
BB90
for Grinder-dispenser (CARIMALI) M1 - M3
for Grinder-dispenser (OBEL) DSQ - EB - MITO
for Grinder-dispenser (PAVONI) ZIP
for Grinder-dispenser (RENEKA) B14
PAVONI 0BEB08
<|
T
2
>
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
PROMAC
<
T
2
1251072
<|
|>
GRINDING BURRS RANCILIO (PAIR) LEFT
1251109
<|
T
2
>
|>
external ø 75 mm - internal ø 43 mm
thickness 10.5 mm - 3 mounting holes
for Grinder-dispenser (PROMAC) MD75
for Grinder-dispenser (RANCILIO) MD80
PROMAC 69000034
1251071
<|
|>
GRINDING BURRS RANCILIO-VFA (PAIR) LEFT
GRINDING BURRS RANCILIO (PAIR) LEFT
external ø 50 mm - internal ø 31 mm
height 8 mm - 3 mounting holes
for Grinder-dispenser (PROMAC) MDCLUB
for Grinder-dispenser (RANCILIO) MD40 - ROCKY
PROMAC 69000032
|>
<|
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (PROMAC) MD64
for Grinder-dispenser (RANCILIO) MD50
for Grinder-dispenser (VFA EXPRES) AE1464NEW
AN1464 - E1464 - N1464
PROMAC 69000033
QUAMAR
<
T
2
1251078
<|
|>
GRINDING BURRS FIORENZATO CS RIGHT
1251052
<|
T
2
>
|>
external ø 63 mm - internal ø 38 mm
thickness 9.5 mm - 3 mounting holes
for Grinder-dispenser (FIORENZATO C.S.) DOGE63
for Grinder-dispenser (QUAMAR) M1 - M80 - T80
T80D
for Grinder-dispenser (VIBIEMME) VB63
QUAMAR 260001
1251185
<|
|>
QUAMAR 260003
GRINDING BURRS PAIR FIORENZATO MS RH
external ø 75 mm - internal ø 43 mm
thickness 10.5 mm - 3 fastening holes
for Grinder-dispenser (QUAMAR) M1/E
QUAMAR 260002
GRINDING BURRS FIORENZATO M S (PAIR) RH
external ø 83 mm - internal ø 45 mm
thickness 10 mm - 3 fixing holes
for Grinder-dispenser (QUAMAR) T48
<|
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
QUICK MILL
<
T
2
1251250
<|
|>
GRIND.BURRS (PAIR) QUICK M ILL RH
1251122
<|
T
2
>
|>
external ø 43 mm - internal ø 26 mm
thickness 7 mm - 3 fixing holes
QUICK MILL FE023MA
1251066
<|
|>
GRINDING BURRS QUICK M ILL (PAIR) LEFT
GRINDING BURRS OBEL-CARIM ALI (PAIR) RH
external ø 54 mm - internal ø 30.5 mm
thickness 8.3 mm - 3 fixing holes
QUICK MILL
|>
<|
external ø 66 mm - internal ø 35 mm
thickness 9 mm - 3 fixing holes
QUICK MILL
RANCILIO
<
T
2
1251072
<|
|>
GRINDING BURRS RANCILIO (PAIR) LEFT
1251109
<|
T
2
>
|>
external ø 75 mm - internal ø 43 mm
thickness 10.5 mm - 3 mounting holes
for Grinder-dispenser (PROMAC) MD75
for Grinder-dispenser (RANCILIO) MD80
RANCILIO 69000034
1251071
<|
|>
GRINDING BURRS RANCILIO-VFA (PAIR) LEFT
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (PROMAC) MD64
for Grinder-dispenser (RANCILIO) MD50
for Grinder-dispenser (VFA EXPRES) AE1464NEW
AN1464 - E1464 - N1464
RANCILIO 69000033
GRINDING BURRS RANCILIO (PAIR) LEFT
external ø 50 mm - internal ø 31 mm
height 8 mm - 3 mounting holes
for Grinder-dispenser (PROMAC) MDCLUB
for Grinder-dispenser (RANCILIO) MD40 - ROCKY
RANCILIO 69000032
<|
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
RENEKA
<
T
2
1251125
<|
|>
GRIND.BURRS ASTORIA-M AHLKONIG(PAIR) LEFT
1251061
<|
T
2
>
|>
external ø 65 mm - internal ø 38 mm
thickness 8.4 mm - 2 mounting holes
for Coffee grinder (ASTORIA CMA) K30
for Grinder-dispenser (MAHLKÖNIG) K30
for Grinder-dispenser (RENEKA) MK10
RENEKA
1251225
<|
GRINDING BURRS OBEL-CARIM ALI (PAIR) LEFT
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (BEZZERA) BB003 - BB105
BB90
for Grinder-dispenser (CARIMALI) M1 - M3
for Grinder-dispenser (OBEL) DSQ - EB - MITO
for Grinder-dispenser (PAVONI) ZIP
for Grinder-dispenser (RENEKA) B14
RENEKA 0005000
|>
GRINDING BURRS PAIR ASTORIA-M AHLKONIG LH
|>
<|
external ø 65 mm - internal ø 38 mm
thickness 8.4 mm - 2 fixing holes
for Coffee grinder (ASTORIA CMA) K30
for Coffee grinder (MAHLKÖNIG) K30
for Coffee grinder (RENEKA) MK10
RENEKA
ROSSI
<
T
2
1251050
<|
|>
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
1251076
<|
external ø 38/30 mm - internal ø 26/7 mm
thickness 17/20,3 mm
for Coffee grinder (ISOMAC) GRANMACININO
PROFESSIONALE - ROBY
for Grinder-dispenser (BRASILIA) FM
for Grinder-dispenser (IBERITAL) MINIMOLINO
for Grinder-dispenser (ROSSI) FM
ROSSI 5200
T
2
>
|>
CONICAL GRIND ING BURRS ROSSI (PAIR) RH
external ø 68/49 mm - internal ø 41/13 mm
thickness 25 mm - 4 mounting holes
inner groove for feather key
for Grinder-dispenser (BRASILIA) MC
for Grinder-dispenser (CASADIO) GC98
for Grinder-dispenser (MACAP) M7K - M7KA - M7KT
for Grinder-dispenser (OBEL) MITOCONIC
for Grinder-dispenser (ROSSI) MC
ROSSI M5585
ROSSI 5585
<T2
T2>
Grinders
Suitable for:
1251016
<|
Suitable for:
|>
GRINDING BURRS (PAIR) ROSSI LEFT
1251011
<|
|>
external ø 50 mm - internal ø 31 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (BRASILIA) BFD
for Grinder-dispenser (ROSSI) BFD
ROSSI 5198
1251094
<|
ROSSI 4433
|>
GRINDING BURRS PAIR ROSSI LH
1251707
<|
|>
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (BRASILIA) MAC64
for Grinder-dispenser (ROSSI) MAC64 - RR55OD
1251146
GRINDING BURRS PAIR ROSSI LH
BURRS "HEAVY DUTY" - duration increased by 70%
compared to a standard grinding burr
they do not deform
lower contamination of ground coffee
external ø 63,5 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
ROSSI 4433.64
ROSSI
SAECO
<
T
2
<|
GRINDING BURRS ASTRAL-ROSSI (PAIR) LEFT
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (BRASILIA) CC45 - RR45
RR55 - RR65 - R80
for Grinder-dispenser (FIAMMA RST) MCF4 - MCF7
for Grinder-dispenser (NUOVA SIMONELLI) MDS - MDSA
for Grinder-dispenser (ROSSI) CC45 - RR45 - RR55
RR65 - R80
|>
CERAM IC GRINDING BURRS SAECO (PAIR) LEFT
T
2
>
|>
<|
external ø 48 mm - internal ø 28 mm
thickness 6.5 mm
SAECO 146520100
1251098
<|
|>
CONIC.GRIND.BURRS SAECO-GAGGIA (PAIR) RH
1251199
<|
|>
external ø 47.8/31.7 mm - internal ø 28/10 mm
thickness 20 mm
SAECO 226477700
SAECO 226473500
SAECO 9141.039
SAECO 9141.040
CONICAL GRIND .BURRS PAIR SAECO-GAGGIA RH
ø external 47.8/31.7 mm - ø internal 28/10 mm
thickness 20 mm
SAECO 226477700
SAECO 226473500
<T2
T2>
Grinders
Suitable for:
1251007
<|
Suitable for:
|>
GRINDING BURRS ARISTARCO-GAGGIA(PAIR) RH
1251173
<|
|>
external ø 84 mm - internal ø 45 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (ARISTARCO) EMA80
for Grinder-dispenser (GAGGIA) MD85
for Grinder-dispenser (SAECO) MS85
SAECO WGAMDB0248
1251099
<|
|>
GRINDING BURRS PAIR SAECO/GAGGIA RH
external ø 64 mm - internal ø 37 mm
thickness 8.5 mm - 3 fixing holes
SAECO 9141.072_2PZ
GRINDING BURRS SAECO (PAIR) LEFT
SAECO 9141.072
|>
<|
external ø 43 mm - internal ø 25 mm
thickness 6.5 mm - 3 fixing holes
SAECO 126520119
SAN MARCO
<
T
2
1251134
<|
|>
CONICAL GRIND .BURRS SAN MARCO (PAIR) RH
1251086
<|
T
2
>
|>
external ø 68/49 mm - internal ø 40/13 mm
thickness 25 mm - 4 mounting holes
for Grinder-dispenser (SAN MARCO) SMFK - SMTK
SAN MARCO 202251
1251087
<|
|>
SAN MARCO 202174
GRINDING BURRS SAN M ARCO (PAIR) RH
external ø 84 mm - internal ø 45 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (SAN MARCO) SM95 - SM95A
SM96 - SM97
SAN MARCO 202254
GRINDING BURRS SAN M ARCO (PAIR) RH
external ø 64 mm - internal ø 37 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (SAN MARCO) SM90 - SM91
SM92
SAN MARCO 202213
1251012
<|
|>
HALF CONICAL GRIND.BURR S.M ARCO(PAIR) RH
external ø 84/45 mm - internal ø 50/13 m
thickness 18/9 mm - 3 mounting holes
for Grinder-dispenser (SAN MARCO) SMFK - SMLK
SMMK - SM91 - SM96
SAN MARCO 202250
<T2
T2>
Grinders
Suitable for:
Suitable for:
SANTOS
<
T
2
5023444
<|
|>
GRINDING BURRS PAIR SANTOS LH
T
2
>
<|
|>
<|
|>
external ø 64 mm - internal ø 35.5 mm
thickness 9 mm - 3 mounting holes
for Coffee grinder (SANTOS) 55
for Grinder-dispenser (SANTOS) 4 - 40A - 43 - 60
SANTOS 00001B
SANTOS 04222
SANTOS 04227
SANTOS 43222
SANTOS 55205
SANTOS 60205
1251081
<|
|>
GRINDING BURRS SANTOS (PAIR) LEFT
external ø 64 mm - internal ø 35,5 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (SANTOS) 55
for Grinder-dispenser (SANTOS) 40A - 43 - 60
SANTOS 00001
SANTOS 00001B
SANTOS 06205
SANTOS 06302
SANTOS 40205
SANTOS 43222
SANTOS 55205
SANTOS 60205
SPAZIALE
<
T
2
1251101
<|
|>
CONICAL GRIND ING BURRS M ACAP(PAIR) RIGHT
1251002
<|
external ø 63/40 mm - internal ø 33/13 mm
thickness 23 mm - 3 mounting holes
for Grinder-dispenser (MACAP) MXK - MXKA - MXKT
for Grinder-dispenser (SPAZIALE) ASTRO8/CA
SPAZIALE 8785
T
2
>
|>
GRINDING BURRS ANFIM (PAIR) LEFT
external ø 64 mm - internal ø 37 mm
thickness 9 mm - 3 fixing holes
for Coffee grinder (ANFIM) CAIMANO ON DEMAND
for Grinder-dispenser (ANFIM) CAIMANO - LUSSO
for Grinder-dispenser (SPAZIALE) LUX800
SPAZIALE 749
<T2
T2>
Grinders
Suitable for:
1251003
<|
Suitable for:
|>
GRINDING BURRS ANFIN (PAIR) LH
1251302
<|
|>
external ø 75 mm - internal ø 43 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (ANFIM)
CAIMANO SPECIAL450 AUTOMATICO
CAIMANO SPECIAL450 TIMER
SPECIAL450 AUTOMATICO - SPECIAL450 TIMER
SUPER CAIMANO - SUPERLUSSO
for Grinder-dispenser (SPAZIALE) S/LUX450
SPAZIALE 5592
1251304
<|
SPAZIALE 7758
|>
GRINDING BURRS M ACAP (PAIR) RIGHT
1251062
<|
|>
external ø 65 mm - internal ø 38 mm
thickness 8.5 mm - 3 fixing holes
for Coffee grinder (MACAP) MC6 - MC6T
for Grinder-dispenser (ELEKTRA) MX - MXA
for Grinder-dispenser (GAGGIA) MD64NEW
for Grinder-dispenser (MACAP) MX - MXA - MXT
for Grinder-dispenser (SPAZIALE) ASTRO12
ASTRO12/A - ASTRO8 - ASTRO8/A - MX - MXA - MXT
1251071
GRINDING BURRS OBEL (PAIR) LEFT
external ø 50 mm - internal ø 30 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (BEZZERA) BB004 - BB95
for Grinder-dispenser (CARIMALI) MJUNIOR
for Grinder-dispenser (FIAMMA RST) MCF2
for Grinder-dispenser (OBEL) JUNIOR
for Grinder-dispenser (SPAZIALE) JUNIOR
SPAZIALE 3276
SPAZIALE 4285
VFA EXPRES
<
T
2
<|
GRINDING BURRS M ACAP (PAIR) RIGHT
external ø 68 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
for Grinder-dispenser (SPAZIALE) M900 - M900A
M900T
|>
GRINDING BURRS RANCILIO-VFA (PAIR) LEFT
external ø 64 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (PROMAC) MD64
for Grinder-dispenser (RANCILIO) MD50
for Grinder-dispenser (VFA EXPRES) AE1464NEW
AN1464 - E1464 - N1464
VFA EXPRES 946005
VFA EXPRES 966005
<|
T
2
>
|>
<T2
T2>
Grinders
Suitable for:
Suitable for:
VIBIEMME
<
T
2
1251084
<|
|>
GRINDING BURRS FIORENZATO CS (PAIR) RH
1251078
<|
T
2
>
|>
external ø 83 mm - internal ø 45 mm
thickness 10 mm - 3 mounting holes
for Grinder-dispenser (FIORENZATO C.S.) DOGE83
for Grinder-dispenser (VIBIEMME) VB83
VIBIEMME MACCMADSVB83
1251138
VIBIEMME MACCMADSVB63
WEGA
<
T
2
<|
GRINDING BURRS FIORENZATO CS RIGHT
external ø 63 mm - internal ø 38 mm
thickness 9.5 mm - 3 mounting holes
for Grinder-dispenser (FIORENZATO C.S.) DOGE63
for Grinder-dispenser (QUAMAR) M1 - M80 - T80
T80D
for Grinder-dispenser (VIBIEMME) VB63
|>
GRINDING BURRS COM PAK (PAIR) RH
T
2
>
|>
<|
external ø 58 mm - internal ø 33 mm
thickness 8.5 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K3
WEGA WY28217014
1251140
<|
|>
GRINDING BURRS COM PAK (PAIR) RIGHT
1251501
<|
|>
external ø 82.5 mm - internal ø 49 mm
thickness 9.5 mm - 3 mounting holes
for Coffee grinder (COMPAK) A8
for Grinder-dispenser (COMPAK) K8
WEGA WY28217011
1251504
<|
|>
GRINDING BURRS PAIR COM PAK-W EGA RH
WEGA WY28217006
1251701
<|
external ø 63.5 mm - internal ø 38 mm
thickness 9 mm - 3 mounting holes
for Grinder-dispenser (COMPAK) K5 - K6
WEGA WY28217000
GRINDING BURRS PAIR COM PAK RH
external ø 60 mm - internal ø 36 mm
thickness 8 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K5
|>
GRINDING BURRS PAIR COM PAK-W EGA RH
GRIND BURRS "HEAVY DUTY" +70% longer life cycle
compared to a standard grinding burr
they do not deform
less contamination of ground coffee
external ø 63 mm - internal ø 38 mm
thickness 9 mm - 3 fixing holes
WEGA
<T2
T2>
Grinders
Suitable for:
1251092
<|
Suitable for:
|>
GRINDING BURRS W EGA-COM PAK (PAIR) RIGHT
ø external 63 mm - ø internal 38 mm
thickness 9 mm - 3 fixing holes
WEGA
1251093
<|
|>
GRINDING BURRS W EGA-COM PAK (PAIR) RIGHT
ø external 80 mm - ø internal 41 mm
thickness 10 mm - 3 fixing holes
for Grinder-dispenser (COMPAK) K8
WEGA WY28217005
The data herewith contained may change without notice and LF SpA cannot be
held responsible for possible errors stated or resulting by the use of this document.
All rights reserved. No part of this publication may be reproduced without written
permission by LF SpA.