docCat2016 Pg1-19.pub
download 
Report Transcription
Cat2016 Pg1-19.pub
www.abrasiveproducts.net ABOUT KASCO ABRASIVES Kasco Abrasives is an American manufacturer of abrasives and backup pads. We have been in business in Michigan since the mid 1970’s with several plant expansions to handle added product lines. In addition to the standard items shown in this catalog we make thousands of special sizes and specifications to fit our customer’s requirements. We also provide private label products to many abrasive companies and large distributors. We operate two divisions, Kasco Abrasives and Koltec USA. Kasco Abrasives sell the full abrasive line as well as the Koltec line of backup pads, primarily aimed at the distributor market. Koltec USA produces the backup pads and sells exclusively to other abrasive companies, tool companies, and abrasive converters. 1-800-367-7291 Cat2016 1 FAX 517-279-7265 www.abrasiveproducts.net TABLE OF CONTENTS Page ABRASIVES DISCS Page MTD POINTS, PLUGS, & CONES Resin Fiber Discs 3 Plugs & Cones 27 Quick Change Discs - Type R and Type S 4 Terrazzo Stones 27 Trim-Kut Discs 5 Mounted Points Shapes "A" & "B” 28 Mini GrindR Discs 5 Mounted Points Shapes "W" 29 Paper Discs - Hook & Loop A/O 6 Paper Discs - PSA Adhesive Back A/O 7 T-1 Grinding Wheels 2” to 4” 30 PSA Cloth Discs 8 Arbor Mounts for Small Diameter Wheels 30 Silicon Carbide W/D Discs 8 Snagging & Large Diameter Wheels 31 Wavy Edge Discs 9 T-1 Bench Grinding Wheels 31 Semi-Flex Discs 9 T-1 General Purpose AO Grinding Wheels 32 T-1 General Purpose SC Grinding Wheels 33 Oilfield Hard Face Grinding Wheels 33 GRINDING WHEELS FLAP WHEELS & DISCS Flap Discs - Standard & High Density 10 Flap Discs - QC & Miniature 11 Flap Wheels - Miniature 11 Cut-off Wheels 1-1/2" TO 4" 34 Flap Wheels - Mounted (1/4” Shank) 12 Arbor Mounts for Small Diameter Wheels 30 Flap Wheels - Unmounted 13 Cut-off Wheels 4-1/2" TO 10" 35 Flap Wheels - Interleaved 17 Slice-It Thin Cut-off Wheels T-1 & T-27 24 Cut-off Wheels 12" TO 20" 36 CUT-OFF WHEELS BELTS, ROLLS & SHEETS Shop Rolls 13 Chop Saw Blades 12” & 14” 36 Paper Sheets 14 Portable Saw Abrasive Blades 6” to 10” 37 Cartridge Rolls 15 Construction Saw Abrasive Blades 12” & 14” 37 Nonwoven Hand Pads 19 Rail Cutting Blades 14” & 16” 37 Slab & Masonry Saw Blades 12” to 20” 38 FLOOR SANDING PRODUCTS Discs, Belts, Rolls, Sandscreen 15 RUBBING BRICKS & FLOOR STONES SURFACE CONDITIONING Rubbing Bricks 38 Terrazzo Stones 27 SCD Disc - H&L and Quick Change 16 Flap Wheels - Interleaved 17 DIAMOND POLISHING DISCS Scuff Balls 17 BACKUP PADS Strip Clean Discs 18 Resin Fiber Disc Pads - Smooth & Ribbed Face 39 Nonwoven Hand Pads 19 Resin Fiber Disc Pads - Rubber 40 Resin Fiber Disc Pads - Interchangeable Plates 40 DEPRESSED CENTER WHEELS 19 T-27 Grinding Wheels - AO, SC, & NZ 20 Random Orbit DA Pads - For PSA Discs 41 T-27 & T-28 Grinding Wheels for Aluminum 21 Random Orbit DA Pads - For H&L Discs 42 T-27 & T-28 “SUPER" Grinding Wheels 21 Backup Pads for H&L Discs - Straight Rotation 43 T-27 Cut-off Wheels - AO, SC, & NZ 22 Backup Pads for PSA Discs - Straight Rotation 43 T-28 Grinding Wheels - AO, SC, & NZ 23 Gripper Pads for SCD Discs 44 Slice-It Thin Cut-off Wheels T-1 & T-27 24 Interface Pads 47 CP-50 Adapters for T-27 & T-28 22 Holders for Quick Change T-S & T-R Discs 45 Pads for Hand Sanding 46 CUP STONES T-11 & T-6 T-11 Flared Cups - AO, SC, & NZ 25 Accessories Backup Pads 47 T-6 Straight Cups - AO & SC Granite/Marble 26 SAFETY INFORMATION 48 1-800-367-7291 Cat2016 2 FAX 517-279-7265 www.abrasiveproducts.net RESIN FIBER SANDING DISCS KASCO resin fiber discs include sizes and grades for all applications. Also available: 5/8-11 quick change hubs—Special Order Alum Oxide Type “A” Alum Zirc Type “AZF” Silicon Carb Type “S” Part No Part No Part No 953016 953024 953036 953050 953060 953080 953100 953120 963016 963024 963036 963050 963060 963080 954016 954024 954036 954050 954060 954080 954100 954120 964016 964024 964036 964050 964060 964080 16 grit 24 grit 36 grit 50 grit 60 grit 80 grit 100 grit 955016 955024 955036 955050 955060 955080 955100 965016 965024 965036 965050 965060 965080 120 grit 955120 Size & Grit 4" x 5/8" 16 grit 24 grit 36 grit 50 grit 60 grit 80 grit 100 grit 120 grit Type “C” ALOX We no longer stock this good quality general purpose resin fiber disc. Limited stock is still available and it can be special ordered. Our Type A ALOX disc is our preferred offering. 4-1/2" x 7/8” 16 grit 24 grit 36 grit 50 grit 60 grit 80 grit 100 grit 120 grit Type “A” ALOX A premium quality resin over cloth fiber disc recommended for most metals including stainless steel. A special grinding additive provides cool performance. Type “AZF” ZIRCONIA Alumina zirconia (BLUE) for extra long life on tough jobs. Excellent on stainless steel. The best value for heavy production work. 5" x 7/8" 975016 975024 975036 975050 975060 975080 975100 Type “S” SILICON CARBIDE Silicon carbide is recommended for use on granite, marble, masonry, and other non-metallic materials. 975120 7" x 7/8" 16 grit 24 grit 36 grit 50 grit 60 grit 80 grit 100 grit 120 grit 957016 957024 957036 957050 957060 957080 957100 957120 967016 967024 967036 967050 967060 967080 959016 959024 959036 959050 959060 959080 959100 959120 969016 969024 969036 969050 969060 969080 977016 977024 977036 977050 977060 977080 977100 977120 Quick Change All resin fiber discs can be ordered with a 5/8-11 metal hub. Add $0.40 to the list price. Minimum order is 1,000 discs of the same diameter. Allow 3-4 weeks for shipment. 9" x 7/8" 16 grit 24 grit 36 grit 50 grit 60 grit 80 grit 100 grit 120 grit 1-800-367-7291 Cat2016 BACK-UP PADS See Pages 39-40 3 FAX 517-279-7265 www.abrasiveproducts.net QUICK CHANGE RESIN FIBER DISCS TYPE S METAL HUB Size Aluminum Oxide Alumina Zirconia Part No Part No 24 660104 660156 36 660103 660155 50 660101 660151 60 660099 660149 660147 Grit KASCO quick change discs are heavy duty fiber backed. Type S discs feature the metal clip twist-on style female connector. Packed 50 per box 2” 3” 80 660097 100 660095 120 660093 24 36 50 660120 660119 660117 660170 660169 660165 60 660115 660163 660161 80 660113 100 660111 120 660109 1-1/2” diameter discs are available from stock on hand. Production has been discontinued. 4” diameter discs available on request. TYPE R PLASTIC HUB Size 2” 3” Aluminum Oxide Alumina Zirconia Part No Part No KASCO quick change discs are heavy duty fiber backed. Type R discs feature the plastic male thread-on style connector. 24 660286 660322 Packed 50 per box 36 660285 660321 50 660283 660319 60 660281 660317 80 660279 660315 100 660277 120 660275 24 36 660298 660297 660334 660333 50 660296 660332 60 660295 660331 80 660293 660329 100 120 660291 660289 Grit 1-800-367-7291 Cat2016 HOLDERS See Page 45 4 FAX 517-279-7265 www.abrasiveproducts.net TRIM-KUT DISCS Ideal for light grinding and surface conditioning applications. Use with a wide variety of tools to handle grinding and sanding jobs. The unique plastic back allows self-trimming to assure a constant fresh edge. Both 3" and 5" discs come with one 1/4” mandrel. The 4½" discs have a 7/8” arbor hole. Other mandrels and adapters are listed below. Part No Size/ Grit Max RPM Pack 873024 873036 3" x 24 grit 21,000 25 3" x 36 grit 21,000 25 873060 3" x 60 grit 21,000 25 873120 3" x 120 grit 21,000 25 874036 4½" x 36 grit (7/8” arbor) 13,000 25 874060 4½" x 60 grit (7/8” arbor) 13,000 25 874120 4½" x 120 grit (7/8” arbor) 13,000 25 875024 5" x 24 grit 12,000 25 875036 5" x 36 grit 12,000 25 875060 5" x 60 grit 12,000 25 875120 5" x 120 grit 12,000 25 MANDRELS & ADAPTERS Use to mount Trim-Kut discs on a wide variety of tools. Part No Size Pack 874001 1/4" Straight Mandrel 1 874002 5/8-11 Adapter 1 874003 3/8-24 Adapter 1 874004 10M-1.25 Adapter 1 874005 10M-1.50 Adapter 1 874006 14M-2.00 Adapter 1 MINI GRIND-R QC DISCS Kasco Mini Grind-R QC Discs. These discs bring a new level of performance to quick change discs. The Type R quick change button is integral with the plastic back, eliminating any chance of the button coming off. The one piece polymer back is much stronger than a paper or cloth disc. These discs will outlast standard discs by up to five times. They can also be special ordered in silicon carbide and alumina zirconia. Standard pack of 10. Part No Description 660507 2" Type R Disc - 24 Grit Alum Oxide 660508 2" Type R Disc - 36 Grit Alum Oxide 660509 2" Type R Disc - 50 Grit Alum Oxide 660510 2" Type R Disc - 60 Grit Alum Oxide 660511 2" Type R Disc - 80 Grit Alum Oxide 660512 2" Type R Disc - 120 Grit Alum Oxide 660513 3" Type R Disc - 24 Grit Alum Oxide 660514 3" Type R Disc - 36 Grit Alum Oxide 660515 3" Type R Disc - 50 Grit Alum Oxide 660516 3" Type R Disc - 60 Grit Alum Oxide 660517 3" Type R Disc - 80 Grit Alum Oxide 660518 3" Type R Disc - 120 Grit Alum Oxide Can be used with right angle grinder by using our heavy duty Type R quick change holders on Page 45. 1-800-367-7291 Cat2016 5 FAX 517-279-7265 www.abrasiveproducts.net HOOK & LOOP PAPER DISCS KASCO aluminum oxide paper Hook & Loop discs provide high quality finishing for a wide variety of woodworking, automotive, and painted applications. Discs 36-120 grit are D weight paper. Discs 150 grit and finer are C weight paper with lubricant coating. Sold in boxes for 50 discs. 5” Hook & Loop Discs Grit Wt 40 60 80 100 120 150 180 220 320 400 600 D D D D D C C C C C C 6” Hook & Loop Discs 5" No Hole 5"- 5 Hole 5"- 8 Hole 665083 665084 665085 665086 665087 665088 665089 665090 665091 665092 665082 665093 665094 665095 665096 665097 665098 665099 665100 665101 665102 - Grit Wt 6" No Hole 6"- 6 Hole 6"- 8 Hole 40 60 80 100 120 150 180 220 320 D D D D D C C C C 665103 665104 665105 665106 665107 665108 665109 665110 665111 665112 - 665118 665119 665120 665121 665122 665123 665124 665126 665125 665127 665128 665129 665130 665131 665132 665133 665135 665134 665138 665139 665140 665141 665142 665143 665144 665145 665146 Special Order 7” and 8” H&L Sanding Discs The below listed Hook & Loop aluminum oxide sanding discs in diameters 7” and 8” can be special ordered with a minimum of 100 discs per size and grit. Alum Oxide Grit 7” 8” H&L, No Vac Holes, 36 Grit 665150 665173 H&L, No Vac Holes, 40 Grit 665151 665174 H&L, No Vac Holes, 60 Grit 665152 665175 H&L, No Vac Holes, 80 Grit 665153 665176 H&L, No Vac Holes, 100 Grit 665154 665177 H&L, No Vac Holes, 120 Grit 665155 665178 H&L, No Vac Holes, 150 Grit 665156 665179 H&L, No Vac Holes, 180 Grit 665157 665180 Our patented 5” (151245) or 6” (151244) ergo hand blocks allow you to use your H&L sanding discs for hand sanding. BACKUP PADS We have a full selection of backup and hand pads for all discs on this page. See Pages 42-46. 1-800-367-7291 Cat2016 6 FAX 517-279-7265 www.abrasiveproducts.net PSA PAPER DISCS KASCO aluminum oxide paper PSA discs provide high quality finishing for a wide variety of woodworking, automotive, and painted applications. Discs 36-120 grit are D weight paper. Discs 150 grit and finer are C weight paper with lubricant coating. Sold in boxes for 100 discs except 40 grit is 50/box. 5” PSA Discs Min 1 box Grit Wt 40 60 6” PSA Discs Min 5 boxes/grit Min 1 box Grit Wt 5" No Hole 5"- 5 Hole 5"- 8 Hole D 665062 665033 665018 40 D 665063 665034 665019 80 D 665064 665035 665020 100 D 665065 665036 120 D 665066 150 C 180 220 Min 5 boxes/grit 6" No Hole 6"- 6 Hole 6"- 8 Hole D 665200 665214 665228 60 D 665201 665215 665229 80 D 665202 665216 665230 665021 100 D 665203 665217 665231 665037 665022 120 D 665204 665218 665232 665067 665038 665023 150 C 665205 665219 665233 C 665068 665039 665024 180 C 665206 665220 665234 C 665069 665040 665025 220 C 665207 665221 665235 240 C 665070 665041 665026 240 C 665208 665222 665236 280 C 665071 665042 665027 280 C 665209 665223 665237 320 C 665072 665043 665028 320 C 665210 665224 665238 400 600 C C 665073 665074 665044 665045 665029 665030 400 600 C C 665211 665212 665225 665226 665239 665240 Our patented 5” (151243) or 6” (151242) ergo hand blocks allow you to use your PSA sanding discs for hand sanding. BACKUP PADS We have a full selection of backup and hand pads for all discs on this page. See Pages 41-46. 1-800-367-7291 Cat2016 7 FAX 517-279-7265 www.abrasiveproducts.net SILICON CARBIDE WET/DRY DISCS Grit Premium silicon carbide C weight paper for wet/dry sanding. Use on granite, marble and other ceramic materials. PSA discs have parting paper with a pull tab. The 5” and 4” discs have a 1/2” center hole. 4" x 1/2” 5" x 1/2” Hook & Loop Hook & Loop 40 665336 665321 60 665337 665322 5" PSA 665352 80 665338 665323 665353 120 665339 665324 665354 220 665340 665325 665355 240 665341 665326 - 320 665342 665327 665357 400 665343 665328 665358 600 665344 665329 665359 800 665345 665330 - 1200 665346 665331 665361 2000 665347 665332 - CLOTH PSA DISCS KASCO cloth PSA discs are X wt aluminum oxide, and are available on a made to order basis. Diameters: 1/2” to 24” AO Grits: 24 to 320. The last three digits of the part number are the grit. For example, 6” disc 150 grit will be #71006150. Diameter Pack Part No Diameter Pack Part No 1/2" 3/4" 1" 1½" 2" 3" 4" 5" 6" 7" 8" 200 200 200 100 100 100 50 50 50 25 25 71112XXX 71134XXX 71001XXX 71115XXX 71002XXX 71003XXX 71004XXX 71005XXX 71006XXX 71007XXX 71008XXX 9" 10" 12" 14" 15" 16" 18" 20" 24" 30" 25 25 25 25 25 25 10 10 10 10 71009XXX 71010XXX 71012XXX 71014XXX 71015XXX 71016XXX 71018XXX 71020XXX 71024XXX 71030XXX ABRASIVE BELTS All belts are made to order to meet the requirements of each application. Abrasive cloth is available to cover a wide range of applications, including both open and closed coat. Belts are available for portable sanders, stationary shop sanders, wide belts, pump sleeves and most other applications. Available in widths 3/8” to 52” and any length. Please call or email for pricing based on your requirements. 1-800-367-7291 Cat2016 8 FAX 517-279-7265 www.abrasiveproducts.net WAVY EDGE H&L DISCS #665400 - 2” Wavy Disc Starter Kit Contains 10 each 2” cloth wavy edge discs in 80, 100, 150, 180, 220, & 320 grit 2” x 1/4 shank backup pad and three solid interface pads. Kasco’s wavy hook & loop discs are perfect for sanding small contoured pieces. Since the disc wavy edge extends over the edge of the backup pad they will conform to convex shapes like wood bowls. Our discs are not the typical paper, but cloth back for much longer disc life and durability. These cloth discs will not tear. Also can be special ordered in 3” diameter. Part No Description Wavy Edge Abrasive Discs With the 1/4” spindle backup pad they can be used with electric drills and other collet tools. They are especially popular with wood turners, wood bowl makers, and other craftsmen. 665400 2" Starter Kit 665407 2" H&L Disc 80 Grit - 50 pack 665408 2" H&L Disc 120 Grit - 50 pack 665409 2" H&L Disc 150 Grit - 50 pack 665410 2" H&L Disc 180 Grit - 50 pack 665411 2" H&L Disc 220 Grit - 50 pack 665412 2" H&L Disc 320 Grit - 50 pack 665413 2" H&L Disc 400 Grit - 50 pack 665414 2" H&L Disc 600 Grit - 50 pack 151052 2" x 1/4 Shank Cushioned Pad - H&L Backup and Interface Pads 151031 2" Interface Pad 1/4" Hard Black 151032 2" Interface Pad 1/4" Soft White 151033 2" Interface Pad 3/4" Soft Grey 151034 151035 2" Interface Pad 1/4" Hard Black Donut Style 2" Interface Pad 1/4" Soft White Donut Style SEMI-FLEX DISCS Semi-flex discs offer a thick layer of abrasive grain in unique swirl pattern that creates an air flow for cooler running and less clogging. These discs are ideal for stock removal over a wide area. Requires the use of a RFD back-up pad, but that pad may be smaller than the disc diameter. For example, a 4½ “ resin fiber disc back-up pad may be used with the 7” disc. Aluminum Oxide Use on ferrous metals. Silicon Carbide Use on nonferrous metals and concrete/masonry. BACK-UP PADS See Page 39 Diameter x Arbor Max RPM Pack 16 Grit 24 Grit 36 Grit 12,000 8,500 25 25 837016 834024 837024 834036 837036 12,000 8,500 25 25 831016 833016 831024 833024 831036 833036 60 Grit 80 Grit 831060 833060 831080 833080 Aluminum Oxide 4½ x 7/8 7 x 7/8 Silicon Carbide 4½ x 7/8 7 x 7/8 1-800-367-7291 Cat2011 9 FAX 517-279-7265 www.abrasiveproducts.net FLAP DISCS KASCO flap discs offer the following advantages: Made from alumina zirconia cloth (blue) for extended life and fast cut. Will outlast aluminum oxide resin fiber discs up to 25:1. Removes welds and blends in one fast operation. Provides more uniform grinding than resin fiber discs. Can do the work of both a T-27 wheel and RFD. Std 7/8” Ar- 5/8-11 Hub ALUMINA ZIRCONIA CLOTH T-29 Constructed with a fiber glass backing plate that consumes itself as the abrasive cloth wears away. This style is favored for applications where the user is concerned that the backing plate will touch the work. Made from premium blue alumina zirconia cloth in a wide selection of grits. T-27 flap discs are available in some sizes. Size 24 Grit T-29 Beveled Design Max RPM Pack 4" x 5/8" arbor 15,000 10 4½" x 7/8" arbor 13,000 10 4½" x 5/8-11 arbor 13,000 10 5" x 7/8" arbor 12,000 10 605024L 605036L 605040L 605060L 605080L 605120L 7" x 7/8" arbor 8,600 10 607024L 607036L 607040L 607060L 607080L 607120L 7" x 5/8-11 arbor 8,600 10 645024L 36 Grit 40 Grit 60 Grit 80 Grit 120 Grit 604036L 604040L 604060L 604080L 604120L 645036L 645040L 645060L 645080L 645120L 645024L-1 645036L-1 645040L-1 645060L-1 645080L-1 645120L-1 607024L-1 607036L-1 607040L-1 607060L-1 607080L-1 607120L-1 FLAP DISCS - HIGH DENSITY High density flap discs have up to 60% more cloth than our standard discs for longer life and a softer grind. KASCO high density flap discs are ideal for grinding and finishing contoured shapes. All discs in the table below feature premium alumina zirconia cloth. Discs are available with aluminum oxide cloth upon request. Diameter x Arbor Shape Max RPM Pack 40 Grit 60 Grit 80 Grit 4½" x 7/8" arbor 29 13,000 10 645047L 645067L 645087L 4½" x 7/8" arbor 27 13,000 10 645046L 645066L 645086L 7" x 7/8" arbor 29 8,600 10 607047L 607067L 607087L 7" x 5/8-11 arbor 29 8,600 10 607047L-1 607067L-1 607087L-1 1-800-367-7291 Cat2016 1O FAX 517-279-7265 www.abrasiveproducts.net FLAP DISCS - QUICK CHANGE TYPE R KASCO mini flap discs are ideal for light grinding and finishing in one operation. Excellent for weld removal and blending. The discs have a Type R “Roll-on” threaded attachment. They feature alumina zirconia cloth and will outlast single ply quick change abrasive discs about 10 to 1. See Page 44 for superior quick change Kasco holders for mini flap discs. We carry a full line of QC holders. See Page 45. TYPE 27 ZIRCONIA QUICK CHANGE TYPE R DISCS Size Max RPM PACK 36 Grit 40 Grit 60 Grit 80 Grit 120 Grit 2" x Type R 30,000 10 646101 646102 646103 646104 646105 3" x Type R 20,000 10 646111 646112 646113 646114 646115 FLEX EDGE TYPE 27 ZIRCONIA QUICK CHANGE TYPE R DISCS Size Max RPM PACK 36 Grit 40 Grit 60 Grit 80 Grit 120 Grit 2" x Type R 30,000 10 646121 646122 646123 646124 646125 3" x Type R 20,000 10 646131 646132 646133 646134 646135 Kasco’s Flex Edge quick change discs have a soft outer edge that will easily contour into concave shapes. They are configured with the Type R quick change connection. FLAP WHEELS - MINIATURE Miniature flap wheels have 1/8” shanks with aluminum oxide cloth. Size (D x H) Pack 60 Grit 80 Grit 120 Grit 180 Grit 240 Grit 3/8 x 3/8 20 851519 851520 851521 851522 851523 5/8 x 5/8 20 851525 851526 851527 851528 851529 320 Grit 851530 5/8 x 3/4 20 851531 851532 851533 851534 851535 851536 3/4 x 3/16 20 851537 851538 851539 851540 851541 851542 3/4 x 3/8 20 851543 851544 851545 851546 851547 851548 3/4 x 3/4 20 851561 851562 851563 851564 851565 851566 1-3/16 x 3/16 20 851567 851568 851569 851570 1-3/16 x 3/8 20 851573 851574 851575 851576 1-800-367-7291 Cat2016 11 FAX 517-279-7265 www.abrasiveproducts.net FLAP WHEELS - MOUNTED 1/4” SHANK KASCO mounted flap wheels are offered in two grades. General purpose wheels come in larger packs and have slightly less flaps. They are ideal for most applications. Premium flap wheels are for demanding jobs. Interleaved Flap Wheels - See Page 17 GENERAL PURPOSE MOUNTED FLAP WHEELS Size (D x H) Pack 1 x 5/8 100 1x1 100 1½ x 1/2 50 1½ x 1 50 2 x 1½ 50 2x2 50 2½ x 1 25 3 x 1/2 25 40 grit 60 grit 80 grit 120 grit 851002 851009 851005 851011 851020 851027 180 grit 851013 851021 851022 851030 851074 851075 851076 851136 851090 851092 851093 851094 851101 851102 851103 PREMIUM MOUNTED FLAP WHEELS Mounted flap wheels are listed with 1/4” straight shanks. Many can be ordered with threaded 1/4-20 shanks rather than the 1/4” straight shank. Add a “-1” to the end of the part number. Size (D x H) Pack 40 grit 60 grit 80 grit 120 grit 180 grit 240 grit 320 grit 3/4 x 3/4 10 851385 851386 851387 851388 851389 851390 851391 1 x 5/8 10 851400 851401 851402 851403 851404 851405 1x1 10 851407 851408 851409 851410 851411 851412 851413 1½ x 1/2 10 851414 851416 851417 851418 851419 851420 1½ x 1 10 851423 851424 851425 851426 851427 851428 851429 2 x 1/2 10 851430 851432 851433 851434 851435 851436 851437 2 x 3/4 10 851438 851440 851441 851442 851443 2x1 10 851446 851448 851449 851450 851451 851452 851453 2 x 1½ 10 851510 851511 851512 851513 2x2 10 851502 851504 851505 851506 2½ x 1/2 10 851456 851457 851458 2½ x 1 10 851464 851465 851466 851467 851468 851469 2½ x 1½ 10 3 x 1/2 10 851471 851472 851473 851474 851475 851476 851477 3x1 10 851479 851480 851481 851482 851483 851484 851485 3x2 10 851486 851488 851489 851490 851491 851463 851507 851508 851460 851516 1-800-367-7291 Cat2016 12 FAX 517-279-7265 www.abrasiveproducts.net FLAP WHEELS - UNMOUNTED The flap wheels below are listed by Diameter x Width x Arbor. Aluminum oxide. Available arbor hole bushings : 851340 Arbor Bushing 1” 851341 Arbor Bushing 1" 851342 Arbor Bushing 1” 851343 Arbor Bushing 1" Other sizes available upon request. Size (D x W) to to to to 1/2” 5/8" 3/4" 7/8" Pack 40 grit 60 grit 80 grit 120 grit 180 grit 240 grit 4 x 1 x 5/8 5 851209 851211 851212 851213 851214 851215 4 x 2 x 5/8 2 851182 851184 851185 851186 6x1x1 5 851218 851220 851221 851222 851223 851224 6 x 1½ x 1 5 851227 851229 851230 851231 851232 851233 6x2x1 2 851236 851238 851239 851240 851241 851242 8x1x1 5 851245 851247 851248 851249 851250 851251 8x2x1 2 851254 851256 851257 851258 851259 851260 SHOP ROLLS Aluminum oxide resin bond on J Weight cloth. Used for a wide variety of cleaning and sanding operations. Shipped in a handy dispensing box. Other sizes available on request. 1” x 50 Yards 1½” x 50 Yards 2” x 50 Yards Part No Part No Part No 40 841040 840040 842040 50 841050 840050 842050 60 841060 840060 842060 80 841080 840080 842080 100 841100 840100 842100 120 841120 840120 842120 150 841150 840150 842150 180 841180 840180 842180 220 841220 840220 842220 240 841240 840240 842240 320 841320 840320 842320 400 841400 840400 842400 Grit 1-800-367-7291 Cat2016 13 FAX 517-279-7265 www.abrasiveproducts.net PAPER SHEETS All Kasco 9” x 11” paper sheets are sold by the 100 pack. The minimum distributor order is 500 total sheets. Grit AO Cabinet Part No AO Cloth Wt 40 SC Waterproof Part No Wt 682075 J J Part No Wt 50 682090 D 682076 60 682091 D 682077 J 682037 C 80 682092 C 682078 J 682038 C 100 682093 A 682079 J 682039 C 120 682094 682080 J 682040 C 150 682095 A A 682081 J 682041 C 180 682096 A 682082 J 682042 A 220 682097 A 682083 J 682043 A 280 682098 A 682084 J 682044 A 320 682099 A 682085 J 682045 A 682086 J 682046 A 400 500 682047 A 600 682048 A 800 682049 A 1000 682050 A 1200 682051 A 2000 682054 A 2500 682055 A 1-800-367-7291 Cat2016 14 FAX 517-279-7265 www.abrasiveproducts.net CARTRIDGE ROLLS KASCO offers a complete selection of cartridge rolls custom manufactured to each application. Standard materials include aluminum oxide and alumina zirconia. We offer both glue and resin bond. Pricing will be based on the abrasive material, size, type, and quantity per order. Call for a quote. Straight Cartridge Rolls Tapered Cartridge Rolls Base Diameter 3/8” to 1-1/2” Straight Cartridge Rolls Diameters 3/16” to 1½” Mandrels to fit any roll FLOOR SANDING PRODUCTS KASCO Abrasives offers a full line of floor sanding, finishing, and maintenance products. Call for prices. Large Diameter Floor Sanding Discs Standard sizes 15” x 2” up to 20” x 2” Standard grits 12-120 Sandscreen Discs & Sheets Standard diameters 10” to 22” Rectangular 12” x 18” and 12” x 24” Drywall sheets PSA Floor Sanding Discs & Sheets Standard sizes 15” to 20” diameter Rectangular 12” x 18” and 12” x 24” Standard grits 12-120 Cut Sheets Sizes for Clarke and Silverline Grits 12 to 120 Abrasive Paper Rolls 8” x 50 yd is standard Grits 12 to 120 1-800-367-7291 Cat2005 Floor Maintenance Pads Standard diameters 10” to 22” Rectangular 12” x 18” and 12” x 24” 1” & 1/4” thick . Nine grades. Floor Sanding Belts Sizes to fit popular sanders. Both alumina zirconia and aluminum oxide cloth. Edger Discs Sizes for 5” and 7” Grits 12 to 120 15 FAX 517-279-7265 www.abrasiveproducts.net NONWOVEN SURFACE CONDITIONING DISCS HOOK & LOOP BACKED SCD DISCS Diameter Pack 1½" 100 2" 100 3" 50 4" 50 4½" 50 5" 7" 25 25 Grade Color Part No Coarse Medium Coarse Medium Fine Very Fine Gold Maroon Gold Maroon Blue Gray 680016 680017 680020 680022 680024 680023 KASCO Abrasives nonwoven nylon surface conditioning discs provide excellent surface cleanup and finish on ferrous and nonferrous metals. They can also be used on many other materials like plastics and wood. Available in two attachment styles, hook & loop style and "Roll-On" Type R plastic threaded button style. Coarse Medium Fine Very Fine Coarse Medium Fine Very Fine Coarse Medium Fine Very Fine Coarse Medium Fine Very Fine Coarse Medium Fine Very Fine Gold Maroon Blue Gray Gold Maroon Blue Gray Gold Maroon Blue Gray Gold Maroon Blue Gray Gold Maroon Blue Gray 680026 680028 680030 680015 680032 680034 680036 680074 680038 680040 680042 680045 680044 680046 680048 680047 680050 680052 680054 680077 H&L SCD disc with Koltec Gripper pad AVAILABLE GRADES GOLD COARSE for maximum surface cleaning MAROON MEDIUM for most general purpose applications BLUE FINE for light material removal and the good finish GRAY VERY FINE for polishing and the best finish Gripper Backup Pads for SCD Discs Pg 44 TYPE R ROLL-ON SCD DISCS Diameter Pack 1½" 50 2” 50 3" 50 4" 25 Grade Color Part No Coarse Medium Fine Very Fine Coarse Medium Fine Very Fine Coarse Medium Fine Very Fine Gold Maroon Blue Gray Gold Maroon Blue Gray Gold Maroon Blue Gray 680060 680061 680062 680063 680027 680029 680069 680031 680033 680035 680070 680037 Coarse Medium Fine Very Fine Gold Maroon Blue Gray 680039 680041 680071 680043 1-800-367-7291 Cat2016 Quick Change SCD disc with Koltec holder Holders for QC Discs Pg 45 16 FAX 517-279-7265 www.abrasiveproducts.net INTERLEAVED FLAP WHEELS Kasco interleaved flap wheels are made to order with maroon nonwoven material layered with abrasive cloth. All wheels in this list have a 1/4” shank. Grits for the abrasive cloth can be specified from 80 to 400 grit. Most common is 180 or 150 grit. The last three digits of the part number are the grit. See Page 12 for abrasive cloth flap wheels. Size D x H Part No Pack 1x2 851801xxx 20 1½ x 1/2 851802xxx 20 1½ x 1 851803xxx 20 2x1 851804xxx 20 2x2 851805xxx 20 3 x 1/2 851806xxx 20 3x1 851807xxx 20 3x2 851808xxx 20 SCUFF BALLS Kasco’s Scuff Ball™ tools are made up of individual layers of non-woven material layered, compressed, and assembled into a ball. They have a series of fingers that can reach into tight spaces and conform to the work piece. They resist clogging and do not overheat. Some of benefits include: Power scuffing saves labor and provides a more consistent finish. The ball shape provides superior performance over hand scuffing. The Scuff Ball™ renews itself as it wears. It can be cleaned with compressed air or water. They do not overheat due to airflow through the open web structure. Available in two sizes: 4" diameter rated at 5,000 RPM and 2.5" diameter rated at 10,000 RPM. These RPM ratings are maximum but Scuff Balls™ works very well at slower speeds typical of electric drill motors. Part No Description 680122 Scuff Ball 4” x 1/4 Shank Maroon Med 680123 Scuff Ball 4” x 1/4 Shank Grey Fine 680124 Scuff Ball 4” x 1/4 Shank Green Coarse 680132 Scuff Ball 2-1/2” x 1/4 Shank Maroon Med 680133 Scuff Ball 2-1/2” x 1/4 Shank Grey Fine 680134 Scuff Ball 2-1/2” x 1/4 Shank Green Coarse The colors below correspond to the popular 6" x 9" SDC hand pad material Coarse Green Compares to #2 steel wool. Use for heavy scrubbing and removal of rust and scale. Medium Maroon Is a general purpose grit comparable to #00 steel wool. Fine Grey Compares to #000 steel wool. It produces a bright shiny finish. 1-800-367-7291 Cat2016 17 FAX 517-279-7265 www.abrasiveproducts.net STRIP-CLEAN DISCS These coarse synthetic fiber discs are impregnated with abrasive grit, and are a safer alternative to wire bristle brushes. Use to remove surface material without damaging the under-surface. They are ideal for: Paint removal Cleaning rust and corrosion Freshening old wood Cleaning boat hulls They are available in two different configurations as follows: T-27 depressed center which can be direct mounted on to a right angle grinder. With a quick change Type R button for use with our holders. T-27 style for direct mount on tools with 5/8-11 arbors Part No Description T-R style for use with quick change holders. See note below. Max RPM Pack T-27 Depressed Center Style 680091 Strip-Clean 4-1/2” x 7/8” arbor 11,500 10 6,000 10 Type R Quick Change Style 680088 Strip-Clean 4” Type R Backup Pads & Holders for Strip-Clean Discs 151206 3” Type R holder fits 5/8-11 tools - use with 680088 1 151456 3” Type R rubber holder 1/4” shank - use with 680088 1 Our 151206 3” holder can be mounted on a right angle tool with 5/8-11 arbor or can be used with the included 1/4” straight shank. See Page 45. 1-800-367-7291 Cat2016 18 FAX 517-279-7265 www.abrasiveproducts.net NONWOVEN HAND PADS KASCO nonwoven nylon pads are 6" x 9" in size for hand cleaning and polishing a variety of materials. They are available in five color coded grades as listed below. WHITE NON-ABRASIVE - For polishing or light cleanup jobs. Can be used to replace #0000 steel wool. Excellent for use with detergent or cleaners to remove grease or stubborn spots. GRAY FINE – A fine grit silicon carbide pad. Can be used to sand between coats of stain or varnish. MAROON MEDIUM - Aluminum oxide pad for most general purpose applications. Used to remove rust, clean and brighten metal, and general smoothing job. The most popular pad. GREEN COARSE – Aluminum oxide hand pad designed for use with chemical strippers to remove paint or varnish. Also good for rust removal jobs. TAN HEAVY DUTY - An aluminum oxide pad for rapid cutting in rough applications. Use to clean machinery and equipment with most solvents. Grade Color Pads Per Box Part No NON-ABRASIVE WHITE 20 680101 FINE GRAY 20 680104 MEDIUM MAROON 20 680102 COARSE GREEN 20 680107 HEAVY DUTY TAN 10 680108 DIAMOND POLISHING PADS Kasco diamond polishing pads are an economic choice while providing good quality performance. They are available in a grit range of 50 to 3000. Ideal for polishing marble and granite. Order individually or in sets. Our #151409 backup pads fits tools with a 5/8-11 arbor and it has the water injection holes. The diamond polishing pads attach to the backup pad by a strong hook & loop connection. Wet pads are for shop use where water cools the work piece and controls dust. Dry pads are more costly and are for onsite polishing. Wet Polishing Dry Polishing Part No Part No 4 x 1/2 - 50 grit 558301 558331 4 x 1/2 - 100 grit 558302 558332 4 x 1/2 - 200 grit 558303 558333 4 x 1/2 - 400 grit 558304 558334 4 x 1/2 - 800 grit 558305 558335 4 x 1/2 - 1500 grit 558306 558336 4 x 1/2 - 3000 grit 558307 558337 4 x 1/2 Set 50-3000 grit - 7 discs 558321 558341 4 x 1/2 Set 50-3000 grit - 7 discs & 151409 pad 558322 558342 Description— Diameter x Arbor Hole 4 x 5/8-11 backup pad (See Page 43) 1-800-367-7291 Cat2016 151409 19 FAX 517-279-7265 www.abrasiveproducts.net T-27 DEPRESSED CENTER GRINDING WHEELS ALUMINUM OXIDE Used for general offhand grinding most ferrous metal applications with right angle grinders. Designed to be used at angles of 15º or more to the surface. A24-RBF General purpose fast cut on most ferrous metals A24-UBF General purpose long life on most ferrous metals Size Max RPM Pack A24-RBF A24-UBF 3 x 1/4 x 3/8 4 x 1/4 x 3/8 18,080 13,560 25 25 906070 906150 906080 906160 4 x 1/4 x 5/8 13,560 25 906155 906152 4½ x 3/16 x 7/8 12,000 25 906185 906190 4½ x 1/4 x 7/8 12,000 25 906175 906180 4½ x 1/4 x 7/8 13,000 25 906100* 906101* 4½ x 1/4 x 5/8-11 12,000 10 906184 906177 5 x 1/4 x 7/8 12,000 25 906200 906202 6 x 1/4 x 7/8 10,000 25 901001 901003 7 x 3/16 x 7/8 8,500 25 901090 901092 7 x 3/16 x 5/8-11 8,500 10 901305 901310 7 x 1/4 x 7/8 8,500 25 901100 901130 7 x 1/4 x 5/8-11 8,500 10 901320 901340 9 x 3/16 x 7/8 6,000 25 901500 901502 9 x 3/16 x 5/8-11 6,000 10 901740 901741 9 x 1/4 x 7/8 6,000 25 901560 901580 9 x 1/4 x 5/8-11 6,000 10 901760 901780 NZ ZIRCONIA Size Max RPM Pack Z-CUT 4 x 1/4 x 3/8 4 x 1/4 x 5/8 13,560 13,560 25 25 906161 906157 4½ x 1/4 x 7/8 12,000 25 906183 5 x 1/4 x 7/8 12,000 25 906205 6 x 1/4 x 7/8 10,000 25 901007 7 x 1/4 x 7/8 8,500 25 901095 7 x 1/4 x 5/8-11 8,500 10 901315 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11 6,000 6,000 25 10 901540 901800 * Quality Import Kasco Z-Cut wheels are made with a proven formulation of premium alumina zirconia grains. These wheels provide extended wheel life and stock removal. They work best with high powered grinders on ferrous and stainless. SILICON CARBIDE For grinding nonferrous metals and concrete/masonry C16-LBF Coarse grinding of concrete/masonry and some nonferrous metals. C20-LBF Medium grinding of concrete/masonry and some nonferrous metals. Size 4½ x 3/16 x 7/8 4½ x 1/4 x 7/8 5 x 1/4 x 7/8 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11 Max RPM 12,000 12,000 12,000 8,500 8,500 6,000 6,000 1-800-367-7291 Pack 25 25 25 25 10 25 10 Cat2016 C16-LBF 909005 909010 909020 902014 902100 902150 902210 C20-LBF 909006 909011 909025 902015 902110 902179 902220 20 FAX 517-279-7265 www.abrasiveproducts.net GRINDING WHEELS FOR ALUMINUM Kasco C24-OBF grinding wheels are specially formulated to grind or cut aluminum. The silicon carbide grade will minimize wheel loading commonly associated with aluminum. Listed below are both T-27 and T-28 wheel shapes. FOR ALUMINUM GRINDING - T-27 & T-28 Size TYPE Max RPM Pack C24-OBF 27 27 27 27 27 28 27 28 27 28 27 28 12,000 12,000 12,000 10,000 8,500 8,500 8,500 8,500 6,000 6,000 6,000 6,000 25 25 25 25 25 25 10 10 25 25 10 10 909008 909012 909030 901980 902016 902008 902125 902126 902185 902186 902233 902235 4½ x 3/16 x 7/8 4½ x 1/4 x 7/8 5 x 1/4 x 7/8 6 x 1/4 x 7/8 7 x 1/4 x 7/8 7 x 1/4 x 7/8 7 x 1/4 x 5/8-11 7 x 1/4 x 5/8-11 9 x 1/4 x 7/8 9 x 1/4 x 7/8 9 x 1/4 x 5/8-11 9 x 1/4 x 5/8-11 FOR ALUMINUM CUTTING - TYPE 27 Size Max RPM Pack C24-OBF 12,000 12,000 25 25 909004 909017 7 x 1/8 x 7/8 8,500 25 902011 7 x 1/8 x 5/8-11 8,500 10 902022 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11 6,000 6,000 25 10 902148 902195 4½ x 1/8 x 7/8 5 x 1/8 x 7/8 SUPER GRINDING WHEELS Kasco Super Grinding Wheels offer heavy fabrication and foundry users an option over flared cups and other bulkier products. These wheels are a full 1/2” thick to provide twice the grinding surface and wheel life. List below are three common specifications. Others are available on request. A24-RBF General purpose fast cut on most ferrous metals C16-LBF For concrete, masonry, and some nonferrous metals FA14-Q4B For cast iron and other foundry applications These wheels are too heavy for use with a 5/8-11 attached hub. Use with the standard CP-50 adapter shown on Page 22. Size 7 x 1/2 x 7/8 7 x 1/2 x 7/8 7 x 1/2 x 7/8 7 x 1/2 x 7/8 Type Max RPM 27 27 28 28 6,000 6,000 6,000 6,000 1-800-367-7291 Cat2016 A24-RBF C16-LBF FA14-Q4B 901184 902005 901195 902006 901196 901190 21 FAX 517-279-7265 www.abrasiveproducts.net T-27 CUT-OFF & PIPELINE WHEELS ALUMINUM OXIDE Can be used for cut-off and light edge grinding. Ideal for pipe fabrication. ALUMINUM OXIDE - For most ferrous metal grinding applications A24-RBF General purpose fast cut on most ferrous metals. A24-UBF General purpose long life on most ferrous metals. SBD Stringerbead discs are specially formulated for pipeline work. Size Max RPM Pack A24-RBF A24-UBF SBD 18,080 13,560 13,560 13,300 12,000 8,500 8,500 6,000 6,000 25 25 25 25 25 25 10 25 10 906020 906110 906115 906165 906192 901010 901270 901468 901720 906030 906120 906122 906170 906194 901015 901280 901470 901730 903031 903040 903065 903070 3 x 1/8 x 3/8 4 x 1/8 x 3/8 4 x 1/8 x 5/8 4½ x 1/8 x 7/8 5 x 1/8 x 7/8 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11 NZ ZIRCONIA Premium NZ alumina zirconia grain for extended wheel life. In addition to our general purpose Z-CUT spec for most ferrous metal, other specification are available for cutting a wide variety of material. NZ zirconia wheels are best when used on high powered tools. Size Pack Z-CUT 25 10 25 10 901009 901300 901460 901710 Max RPM Pack C20-LBF 13,300 12,000 40 25 909001 909015 7 x 1/8 x 7/8 8,500 25 902009 7 x 1/8 x 5/8-11 8,500 10 902021 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11 6,000 6,000 25 10 902142 902192 7 x 1/8 x 7/8 7 x 1/8 x 5/8-11 9 x 1/8 x 7/8 9 x 1/8 x 5/8-11 Max RPM 8,500 8,500 6,000 6,000 SILICON CARBIDE Size 4½ x 1/8 x 7/8 5 x 1/8 x 7/8 For grinding nonferrous metals and concrete/masonry C20-LBF Medium grinding of concrete/masonry and some nonferrous metals. CP-50 ADAPTER KIT Designed for use with 7" and 9" diameter T-27 and T-28 depressed center wheels. It allows the wheel to be mounted on a 5/8-11 grinder shaft without any other adapters or tool flanges. It may be reused to save the cost associated with "throw-away" style 5/8-11 hubs. Use this hub with Kasco “Super Grinding Wheels” on Page 21. Part No. 952110 1-800-367-7291 Cat2016 22 FAX 517-279-7265 www.abrasiveproducts.net T-28 DEPRESSED CENTER GRINDING WHEELS ALUMINUM OXIDE Used for general offhand grinding most ferrous metal applications with right angle grinders. A24-RBF General purpose fast cut on most ferrous metals A24-UBF General purpose long life on most ferrous metals Size Max RPM Pack A24-RBF A24-UBF 7 x 1/4 x 7/8 8,500 25 901110 901140 7 x 1/4 x 5/8-11 8,500 10 901330 901350 9 x 1/4 x 7/8 6,000 25 901570 901590 9 x 1/4 x 5/8-11 6,000 10 901770 901790 See Page 21 for T-28 wheels for grinding aluminum. NZ ZIRCONIA For grinding hard to cut metals and alloys Z-CUT NZ alumina zirconia for lowest cost/performance ratio Size Max RPM Pack Z-CUT 7 x 1/4 x 7/8 8,500 25 901160 7 x 1/4 x 5/8-11 8,500 10 901318 9 x 1/4 x 7/8 6,000 25 901610 9 x 1/4 x 5/8-11 6,000 10 901801 SILICON CARBIDE For grinding nonferrous metals and concrete/masonry C16-LBF Coarse grinding of concrete/masonry and some nonferrous metals C20-LBF Medium grinding of concrete/masonry and some nonferrous metals Size Max RPM Pack C16-LBF C20-LBF 7 x 1/4 x 7/8 8,500 25 902013 902019 7 x 1/4 x 5/8-11 8,500 10 902101 902120 9 x 1/4 x 7/8 6,000 25 902152 902181 9 x 1/4 x 5/8-11 6,000 10 902211 902230 1-800-367-7291 Cat2016 23 FAX 517-279-7265 www.abrasiveproducts.net SLICE-IT CUT-OFF WHEELS FOR RIGHT ANGLE GRINDERS KASCO Slice-It Wheels are made with a premium aluminum oxide, and excellent for cutting ferrous and stainless steels. Typically used on right angle grinders. Available in both a flat T-1 style or a raised hub T-27 style. Use a safety guard on your tool and observe the maximum speed rating of the wheels. Size Max RPM Type Pack 4½ x .045 x 7/8 13,300 T-1 50 907860 4½ x .045 x 7/8 13,300 T-27 50 907866 4½ x 1/16 x 7/8 13,300 T-1 50 907848 5 x .045 x 7/8 12,200 T-1 50 907891 5 x 1/16 x 7/8 12,200 T-1 50 907893 5 x .045 x 7/8 12,200 T-27 50 907892 6 x .045 x 7/8 10,500 T-1 50 910016 6 x .045 x 7/8 10,500 T-27 50 910017 6 x 1/16 x 7/8 10,500 T-1 50 1-800-367-7291 Cat2016 A46-TBF A60-TBF 910081 24 FAX 517-279-7265 www.abrasiveproducts.net T-11 FLARED CUPS KASCO flared cups are available with either a standard steel back plate or a full back that extends over the top edge. Inquiries for other specifications are welcome. ALUMINUM OXIDE A16-O4B A16-Q4B A24-Q4B A207-M4B General purpose ferrous metal grinding Longer life (harder bond) for ferrous metal grinding For finer finishes For stainless and stainless overlays Size Pack A16-O4B A16-Q4B A24-Q4B 9,070 10 904018 904020 904023 A42S w/full metal back 9,070 10 904024 904030 904033 A52 7,260 10 904080 904090 904092 A52S w/full metal back 7,260 10 904094 904100 904110 A62 6/4¾ x 2 x 5/8-11 6,050 10 904140 904150 904180 A62S w/full metal back 6,050 10 904187 904190 904198 A62-5 6/4¾ x 2½ x 5/8-11 6,050 10 904141 904143 904144 A62-5S w/full metal back 6,050 10 904188 904189 904200 A42 Max RPM 4/3 x 2 x 5/8-11 5/4 x 2 x 5/8-11 SILICON CARBIDE & CA COMBINATION C10-PB C16-PB FA14-Q4B C242-O6B Coarse grinding for concrete/masonry and some nonferrous General purpose concrete/masonry and some nonferrous For cast iron and nonferrous metals (CA combination). Also available in a FA16-Q4B For titanium Size C42 Max RPM 4/3 x 2 x 5/8-11 Pack C10-PB C16-PB FA14-Q4B 9,070 10 905010 905020 904038 C42S w/full metal back 9,070 10 905035 905040 904050 C52 7,260 10 905060 905070 904130 C52S w/full metal back 5/4 x 2 x 5/8-11 7,260 10 905110 905120 904135 C62 6/4¾ x 2 x 5/8-11 6,050 10 905130 905140 904238 C62S w/full metal back 6,050 10 905167 905170 904239 C62-5 6/4¾ x 2½ x 5/8-11 6,050 10 905141 904235 C62-5S w/full metal back 6,050 10 905171 904245 NZ ALUMINA ZIRCONIA NZ16-O4B5D General purpose grinding on ferrous metals NZ24-O4B5D Finer finish and longer life on ferrous metals NZC14-Q4B5D For use on nonferrous castings. Size Max RPM Pack NZ16-O4B5D NZ24-O4B5D 9,070 10 904500 904505 Z42S w/full metal back 9,070 10 904510 904515 Z52 Z42 4/3 x 2 x 5/8-11 7,260 10 904520 904525 Z52S w/full metal back 5/4 x 2 x 5/8-11 7,260 10 904530 904535 Z62 6/4¾ x 2 x 5/8-11 6,050 10 904540 904545 Z62S w/full metal back 6,050 10 904550 904555 Z62-5 6/4¾ x 2½ x 5/8-11 6,050 10 904539 Z62-5S w/full metal back 6,050 10 904552 1-800-367-7291 Cat2016 25 Standard Steel Back Full Metal Back FAX 517-279-7265 www.abrasiveproducts.net T-6 STRAIGHT SIDED CUPS ALUMINUM OXIDE A16-O4B A16-Q4B A24-Q4B General purpose ferrous metal grinding Longer life (harder bond) for ferrous metal grinding For finer finishes SIZE A43 4 x 2 x 5/8-11 A53 5 x 2 x 5/8-11 A63 6 x 2 x 5/8-11 Pack A16-O4B A16-Q4B A24-Q4B 10 10 10 904271 904290 904275 904273 904291 904280 904272 904293 904283 SILICON CARBIDE Kasco silicon carbide T-6 cups are used to grind non-metallic materials like concrete, masonry, granite, and marble. The “PB” specs listed immediately below are generally best for concrete and masonry. Granite and marble specs are listed below. Size Pack C14-PB C16-PB C24-PB C80-PB C120-PB C43 4 x 2 x 5/8-11 10 905045 905041 905043 905047 905051 C53 5 x 2 x 5/8-11 10 905052 905053 905054 905055 905056 C63 6 x 2 x 5/8-11 10 905174 905175 905190 905191 905192 GRANITE & MARBLE—Black Silicon Carbide Size Pack C16-JB C24-JB C30-JB C36-JB C46-JB C60-JB C80-JB C120-JB C43 4 x 2 x 5/8-11 10 905308 905309 905310 905311 905312 905314 905315 905316 C53 5 x 2 x 5/8-11 10 905325 905321 905322 905323 905324 905326 905327 905328 C63 6 x 2 x 5/8-11 10 905280 905282 905283 905285 905287 905289 905291 Size C43 4 x 2 x 5/8-11 Fine Grit T-6 cups for polishing are C53 5 x 2 x 5/8-11 Spec Part No Part No C150-JB 905317 905329 C180-JB 905318 905330 C220-JB 905319 905331 C240-JB 905320 905332 C280-JB 905340 905333 C320-JB 905341 905334 C400-JB 905342 905335 C500-JB 905343 905336 manufactured under stringent process controls to assure a uniformity of grit sizing. The minimum quantity is five pieces per item. 6” cups available in these grits. Maximum RPM for all T-6 cups: 4” 9,070 5” 7,260 6” 6,050 GRANITE & MARBLE—Green Silicon Carbide Green silicon carbide provides longer life for granite and marble grinding. 6” Green GC cups are also available. Size Pack GC24-JB GC30-JB GC36-JB GC46-JB GC60-JB CG43 4 x 2 x 5/8-11 10 905359 905360 905361 905362 905364 905365 905366 CG53 5 x 2 x 5/8-11 10 905375 905376 905377 905378 905379 905380 905385 1-800-367-7291 Cat2016 26 GC80-JB GC120-PB FAX 517-279-7265 www.abrasiveproducts.net PLUGS & CONES Kasco offers a wide selection of resin bond plugs and cones, including all popular shapes. Cone Shapes: T-16, T-17, T-17R, T-18R, T-19, and T-19R Plug Shapes: T-18 Diameters: 1” to 3” Lengths: 1½” to 4” Available Inserts: 3/8-16, 3/8-24, 1/2-13, and 5/8-11 The plugs and cones in this table are semi-standards. The minimum quantity per line item is 20 pieces. Shipment can be made in most cases within one week. All other sizes and grades are priced depending on quantity per order. Call for a quote. Part No Shape Diam x Lg Arbor Grade Part No Shape Diam x Lg Arbor Grade 577010 T16 1½ x 2½ 5/8-11 A20 577030 T18 2x2 3/8-24 A20 577011 T16 1½ x 2½ 3/8-24 A24 577031 T18 2x2 5/8-11 A20 577012 T16 1½ x 3 3/8-24 A16 577032 T18 2x3 5/8-11 A16 577013 T16 1½ x 3 5/8-11 A16 577033 T18 2x3 5/8-11 A24 577014 T16 1½ x 3 3/8-24 A24 577034 T18 2x4 5/8-11 A20 577015 T16 1½ x 3 5/8-11 A24 577035 T18 3x3 5/8-11 A16 577016 T16 1¾ x 3 5/8-11 A16 577036 T18 3x4 5/8-11 A20 577017 T16 1¾ x 3 5/8-11 A24 577037 T18R 1½ x 2½ 3/8-24 A16 577018 T16 2x3 5/8-11 A16 577038 T18R 1½ x 2½ 5/8-11 A16 577019 T16 2x3 5/8-11 A24 577039 T18R 1½ x 2½ 5/8-11 A24 577020 T16 2¾ x 3½ 5/8-11 A16 577040 T18R 1½ x 3 3/8-24 A16 577021 T16 2¾ x 3½ 5/8-11 A24 577041 T18R 1½ x 3 5/8-11 A16 577022 T18 1x2 3/8-24 A24 577042 T18R 1½ x 3 3/8-24 A24 577023 T18 1½ x 2½ 3/8-24 A16 577043 T18R 1½ x 3 5/8-11 A24 577024 T18 1½ x 2½ 5/8-11 A16 577044 T18R 2x3 5/8-11 A16 577025 T18 1½ x 2½ 3/8-24 A20 577045 T18R 2x3 5/8-11 A24 577026 T18 1½ x 2½ 5/8-11 A24 577046 T18R 2¾ x 3½ 5/8-11 A16 577027 T18 1½ x 3 3/8-24 A16 577047 T18R 2¾ x 3½ 5/8-11 A24 577028 T18 1½ x 3 5/8-11 A16 577048 T18R 3x3 5/8-11 A16 577029 T18 1½ x 3 3/8-24 A20 577049 T18R 3x3 5/8-11 A24 A24 577050 T18R 3x4 5/8-11 A20 577005 T18 1½ x 3 5/8-11 TERRAZZO STONES SILICON CARBIDE TERRAZZO STONES Kasco manufactures silicon carbide terrazzo grinding stones in a variety of shapes. Call 1-800-367-7291 for more information. FW26 6 x 2 x 3/4 FW33 4-1/2 x 2 x 3/4 FW61 5/4 x 2 x 3/4 FR594 2 x 2-1/2 Shape Pack C16 C24 C60 C80 C120 C220 FW26 10 905199 905200 905203 905205 905207 905204 FW33 10 905255 905256 905260 905262 FW61 10 905265 905267 905268 905266 FW65 10 905210 905219 905220 905240 905250 FR594 10 942300 942301 942302 942303 942307 FR600 10 942324 942319 942380 942320 942310 905208 1-800-367-7291 Cat2016 27 FR600 3x2 FAX 517-279-7265 www.abrasiveproducts.net MOUNTED POINTS KASCO mounted points are made with premium aluminum oxide grains and a strong vitrified bond. Used for grinding and deburing metals. These points are available in a variety of grits and bonds. Standard shank length is 1½” . Prices are listed below for general purpose vitrified grades. Call for other abrasive grains and specified grits, or resin bond points. “A” Shapes General purpose 60 grit aluminum oxide in either White, Burnt Orange, or Blue Gray. Shape Diam Thick A1 A2 A3 A4 A5 A6 A11 A12 A13 A14 A15 A21 A22 A23 3/4 1 1 1-1/4 3/4 3/4 7/8 11/16 1-1/8 1-1/16 1/4 1 3/4 3/4 2-1/2 1-1/4 2-3/4 1-1/4 1-1/8 1-1/8 2 1-1/4 1-1/8 7/8 1-1/16 1 5/8 1 Shape A24 A25 A26 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 1-800-367-7291 Thick 3/4 1 5/8 1 5/8 1/2 3/8 3/8 3/8 1/4 1 3/4 3/4 Shape Diam Thick B41 B42 B43 B44 B45 B46 B47 B51 B52 B53 B54 B55 B61 B62 B63 B64 B65 B70 B71 B72 B73 B74 B81 B82 B83 B84 B90 B91 5/8 1/2 1/4 7/32 3/16 1/8 1/8 7/16 3/8 1/4 1/4 1/8 3/4 1/2 1/4 1/4 1/8 3/4 5/8 1/2 1/2 7/32 3/4 1/2 3/8 5/16 1/2 1/2 5/8 3/4 5/16 3/8 5/16 5/16 5/32 3/4 3/4 5/8 1/2 1/4 5/16 3/8 3/16 1/16 1/8 1/8 3/32 1/8 1/8 3/32 3/16 1/4 3/16 3/16 1/2 5/8 Cat2016 All “A” shapes have 1/4” shanks. General purpose 60 grit aluminum oxide in either White, Burnt Orange, or Blue “B” Shapes All “B” shapes have 1/8” shanks. The minimum order for any item is 25 pieces. Diam 1/4 1 5/8 1-3/8 1 1 1-1/2 1 1-5/8 1-1/4 1 3/4 3/4 28 Shape B92 B93 B94 B95 B96 B97 B98 B101 B102 B103 B104 B105 B106 B111 B112 B113 B114 B115 B121 B122 B123 B124 B125 B131 B132 B133 B134 B135 B136 Diam 1/4 3/16 11/64 1/8 1/8 1/8 3/32 5/8 5/8 5/8 5/16 1/4 1/8 7/16 3/8 1/4 7/32 3/32 1/2 3/8 3/16 1/8 1/4 1/2 3/8 3/8 5/16 1/4 1/4 Thick 1/4 3/16 3/32 3/16 1/4 3/16 1/4 1-11/16 1/2 1/4 3/8 1/4 7/64 1-1/16 1/2 1/4 3/8 1/8 1/2 3/8 3/16 1/8 1/4 1/2 1/2 3/8 3/8 1/2 5/16 FAX 517-279-7265 www.abrasiveproducts.net MOUNTED POINTS General purpose 60 grit aluminum oxide in either White, Burnt Orange, or Blue Gray. “W” Shapes KASCO mounted points are made with premium aluminum oxide grains and a strong vitrified bond. These points are available in a variety of grits and bonds. Resin bonded points will be quoted. Some W shapes come in both 1/8” and 1/4” shanks depending as noted in the table. Please specify your requirements. 1-1/2” is the standard shank length. All “W” shapes are measured as noted The minimum order for any mounted point is 25 pieces. 1-800-367-7291 Shape Diam Thick Shank Shape Diam Thick Shank W141 3/32 5/32 1/8 W142 3/32 1/4 1/8 W193 W194 5/8 5/8 3/8 1/2 1/8-1/4 1/8-1/4 W143 1/8 1/8 1/8 W195 5/8 3/4 1/8-1/4 5/8 1 1/4 W144 1/8 1/4 1/8 W196 W145 1/8 3/8 1/8 W197 5/8 2 1/4 1/8 W198 5/8 2-1/2 1/4 3/4 1/16 1/4 W146 1/8 1/2 W149 5/32 1/4 1/8 W199 W151 3/16 1/8 1/8 W200 3/4 1/8 1/4 3/4 1/4 1/4 W152 3/16 1/4 1/8 W201 W153 3/16 3/8 1/8 W202 3/4 3/8 1/8-1/4 3/4 1/2 1/8-1/4 W154 3/16 1/2 1/8 W203 W157 1/4 1/16 1/8 W204 3/4 3/4 1/8-1/4 W158 1/4 1/8 1/8 W205 3/4 1 1/4 W159 1/4 3/16 1/8 W206 3/4 1-1/4 1/4 W160 1/4 1/4 1/8 W207 3/4 1-1/2 1/4 W161 1/4 5/16 1/8 W208 3/4 2 1/4 W162 1/4 3/8 1/8 W209 3/4 2-1/2 1/4 W163 1/4 1/2 1/8 W210 7/8 1/16 1/8 W164 1/4 3/4 1/8 W211 7/8 1/8 1/8 W165 5/16 1/16 1/8 W212 7/8 1/4 1/8-1/4 W166 5/16 1/8 1/8 W213 7/8 3/8 1/8-1/4 W167 5/16 1/4 1/8 W214 1-5/16 1/4 1/8-1/4 W168 5/16 5/16 1/8 W215 1 1/8 1/8-1/4 W169 5/16 3/8 1/8 W216 1 1/4 1/8-1/4 W170 5/16 1/2 1/8 W217 1 3/8 1/4 W171 5/16 3/4 1/8 W218 1 1/2 1/4 W172 3/8 1/16 1/8 W219 1 3/4 1/4 W173 3/8 1/8 1/8 W220 1 1 1/4 W174 3/8 1/4 1/8 W221 1 1-1/2 1/4 W175 3/8 3/8 1/8 W222 1 2 1/4 W176 3/8 1/2 1/8-1/4 W223 1 2-1/2 1/4 W177 3/8 3/4 1/8-1/4 W225 1-1/4 1/4 1/4 W178 3/8 1 1/8-1/4 W226 1-1/4 3/8 1/4 W179 3/8 1-1/4 1/8 W227 1-1/4 1/2 1/4 W228 1-1/4 3/4 1/4 W181 1/2 1/16 1/8 W229 1-1/4 1 1/4 W182 1/2 1/8 1/8 W230 1-1/4 1-1/4 1/4 W183 1/2 1/4 1/8 W231 1-1/4 1-1/2 1/4 W184 1/2 3/8 1/8-1/4 W232 1-1/4 2 1/4 W185 1/2 1/2 1/8-1/4 W235 1-1/2 1/4 1/4 W186 1/2 3/4 1/8-1/4 W236 1-1/2 1/2 1/4 W187 1/2 1 1/8-1/4 W237 1-1/2 1 1/4 W188 1/2 1-1/2 1/4 W238 1-1/2 1-1/2 1/4 W189 1/2 2 1/4 W239 1-1/2 2 1/4 W190 5/8 1/16 1/4 W242 2 1 1/4 W191 5/8 1/8 1/4 W192 5/8 1/4 1/8-1/4 W243 W244 2 2 1-1/2 2 1/4 1/4 Cat2016 29 FAX 517-279-7265 www.abrasiveproducts.net T-1 GRINDING WHEELS - 2” to 4” DIAMETER Designed for use on straight grinders to reach small areas of the work piece. Double external reinforced for safety. ALUMINUM OXIDE A24-TBF Very fast grinding of most ferrous metals A36-TBF General purpose grinding of most ferrous metals A46-TBF Longer wheel life grinding most ferrous metals A60-TBF For finer finishes, excellent on stainless steel Other sizes and specifications available on request. Size Max RPM PACK A24-TBF A36-TBF A46-TBF A60-TBF 2 x 1/4 x 1/4 30,550 25 907194 907195 907192 907193 2 x 1/4 x 3/8 30,550 25 907200 907210 907199 907198 2 x 3/8 x 1/4 27,120 15 907229 907230 907235 907236 2 x 3/8 x 3/8 27,120 15 907244 907245 907242 907243 2 x 1/2 x 1/4 27,120 10 907401 907402 907400 907399 2 x 1/2 x 3/8 27,120 10 907404 907405 907406 907407 2½ x 1/4 x 1/4 24,450 20 907530 907549 907550 907532 2½ x 1/4 x 3/8 24,450 20 907542 907543 907540 907541 2½ x 3/8 x 1/4 21,700 15 907567 907568 907564 907566 2½ x 3/8 x 3/8 21,700 15 907572 907569 907571 907565 2½ x 1/2 x 1/4 21,700 10 907579 907580 907577 907578 2½ x 1/2 x 3/8 21,700 10 907585 907588 907587 907589 3 x 1/4 x 1/4 20,370 20 907678 907679 907680 907677 3 x 1/4 x 3/8 20,370 20 907685 907689 907684 907683 3 x 3/8 x 3/8 18,080 15 907701 907705 907707 907708 3 x 1/2 x 1/4 18,080 10 907718 907721 907719 907720 3 x 1/2 x 3/8 18,080 10 907728 907729 907730 907731 4 x 1/4 x 3/8 15,280 20 907827 907831 907826 907825 4 x 3/8 x 3/8 13,560 15 907842 907843 907841 907840 4 x 1/2 x 3/8 13,560 10 907856 907857 907855 907854 ARBOR MOUNTS FOR SMALL T-1 WHEELS For use with cut-off and grinding wheels that have diameters 4" and smaller, and thickness up to 1/4". They are primarily used with the small diameter cut-off wheels on Page 34. Only wheels with thickness of 1/4” or less are suitable to mounted with these arbors. Wheels thicker than 1/4” are normally mounted on tool arbor shaft between two washers of equal diameter. Description Pack Part No A18 for 1/8" arbor hole wheels 1 908404 A14 for 1/4" arbor hole wheels 1 908402 A38 for 3/8" arbor hole wheels 1 908401 A48 combination for both 1/4" and 3/8" 1 908403 1-800-367-7291 Cat2016 30 FAX 517-279-7265 www.abrasiveproducts.net SNAGGING & GRINDING LARGE WHEELS KASCO Abrasives offers a wide selection of swing frame and floor stand foundry snagging wheels for cast iron, malleable iron, nodular iron, gray iron, steel, stainless steel, and titanium. We service foundries across the United States, Canada and Mexico. Our wheels are made from the best in raw materials, featuring all the available Aluminum Oxide, Silicon Carbide and Alumina Zirconia grains . Due to our size and strong manufacturing processes, we are able to engineer the best possible product at a competitive price for each customer. All wheels are engineered to specific applications based on: Material being ground Machine speed and horsepower Desired surface finish Wheel life versus speed cut considerations Below are standard wheel sizes. 14 x (1/2 to 2) x 1-1/4 16 x (1/2 to 2) x 1-1/4 20 x (1/2 to 3) x 12 24 x (3/4 to 3) x 12 30 x (1 to 3) x 12 HARDFACING WHEELS We have an excellent line of grinding wheels for smoothing and finishing hard face alloys. Wheels are available up to 30” diameter. Contact us for a quote on your requirements. T-1 BENCH & PEDESTAL GRINDING WHEELS Resin bonded aluminum oxide wheels are designed for general purpose shop grinding, and are more rugged and higher speed rated than vitrified wheels. All KASCO bench grinder wheels are single packed for ease of handling and resale. FINE MEDIUM COARSE A465-L6-B3B A305-N5-B3B A205-O4-B3B Size RPM Pack Fine Medium Coarse 6 x 1/2 x 1 6,048 1 918700 918701 918702 6 x 3/4 x 1 6,048 1 918703 918704 918705 6x1x1 6,048 1 918706 918707 918708 7 x 1/2 x 1 5,183 1 918709 918710 918711 7 x 3/4 x 1 5,183 1 918712 918713 918714 7x1x1 5,183 1 918715 918716 918717 8 x 1/2 x 1 4,538 1 918718 918719 918720 8 x 3/4 x 1 4,538 1 918721 918722 918723 8x1x1 4,538 1 918724 918725 918726 10 x 1 x 1¼ 3,629 1 918727 918728 918729 10 x 1¼ x 1¼ 3,629 1 918730 918731 918732 10 x 1½ x 1¼ 3,629 1 918733 918734 918735 10 x 2 x 1¼ 3,629 1 918736 918737 918738 12 x 1 x 1¼ 3,023 1 918739 918740 918741 12 x 1½ x 1¼ 3,023 1 918742 918743 918744 12 x 2 x 1¼ 3,023 1 918745 918746 918747 14 x 2 x 1¼ 2,592 1 918748 918749 918750 1-800-367-7291 Cat2016 31 Bushings are available for 1/2" , 5/8" and 1" grinder shafts. 14 x 1½” wheels can be made upon request. FAX 517-279-7265 www.abrasiveproducts.net T-1 GRINDING WHEELS - 6” to 14” ALUMINUM OXIDE GENERAL PURPOSE AO GRINDING WHEELS Available in four aluminum oxide grits for general purpose ferrous metal grinding. Other grits and hardness specifications upon request. These wheels can be used as harder bond bench grinding wheels. The listed maximum speeds are for nonreinforced wheels. Reinforcement can be added for higher speed ratings. Size RPM A16-S4B A24-S4B A36-S4B A46-S4B A60-S4B 6 x 1/2 x 1 6,048 918090 918099 918110 918113 918115 6 x 3/4 x 1 6,048 918145 918150 918155 918160 918165 6x1x1 6,048 918185 918215 918225 918230 918235 7 x 1/2 x 1 5,183 918251 918252 918253 918255 918256 7 x 3/4 x 1 5,183 918265 918270 918275 918277 918278 7x1x1 5,183 918280 918285 918290 918295 918300 8 x 1/2 x 1 4,538 918330 918332 918333 918339 918340 8x1x1 4,538 918405 918410 918415 918420 918425 10 x 1 x 1 3,629 918481 918486 918489 918492 918495 10 x 1 x 1¼ 3,629 918483 918485 918491 918493 918496 10 x 1¼ x 1¼ 3,629 918515 918518 918520 918525 918527 10 x 1½ x 1¼ 3,629 918535 918540 918545 918550 918555 10 x 2 x 1¼ 3,629 918560 918565 918570 918571 918575 12 x 1 x 1¼ 3,023 918584 918585 918590 918594 918593 12 x 1½ x 1¼ 3,023 918610 918615 918625 918627 918629 12 x 2 x 1¼ 3,023 918636 918640 918641 918655 918656 14 x 2 x 1¼ 2,592 918675 918680 918685 918690 918695 1-800-367-7291 Cat2016 32 Bushings are available for 1/2" , 5/8" and 1" grinder shafts. 14 x 1½” wheels can be made upon request. CAUTION The wheels and speeds on this page are nonreinforced. They can be made with reinforcement for higher speed ratings within the ANSI B7.1 Standards. Inquiries will be quoted. FAX 517-279-7265 www.abrasiveproducts.net T-1 GRINDING WHEELS - 6” to 14” SILICON CARBIDE SILICON CARBIDE - RESIN BOND C16-PB C24-PB C24-R4B C601-L7 C809-N5 C1201-L7 For grinding concrete/masonry and some nonferrous metals. For grinding concrete/masonry and some nonferrous metals. For grinding tungsten carbide hard facing. For grinding carbide tooling. For grinding carbide tooling. For grinding carbide tooling. Size RPM C16-PB C24-PB C601-L7 C809-N5 C1201-L7 6 x 1/2 x 1 6,048 919025 919026 919056 919057 919058 6 x 3/4 x 1 6,048 919070 919080 919085 919086 919087 6x1x1 6,048 919092 919100 919106 919110 919111 7 x 1/2 x 1 5,183 919129 919130 919135 919137 919138 7 x 3/4 x 1 5,183 919139 919140 919145 919147 919148 7x1x1 5,183 919169 919170 919175 919179 919178 8 x 3/4 x 1 4,538 919237 919238 919236 919239 919240 8x1x1 4,538 919270 919269 919266 919267 919268 10 x 1 x 1 3,629 919290 919291 919295 919292 919293 10 x 1 x 1¼ 3,629 919297 919298 919300 919299 919302 10 x 1¼ x 1¼ 3,629 919320 919322 919324 919326 919330 10 x 1½ x 1¼ 3,629 919343 919344 919345 919347 919348 10 x 2 x 1¼ 3,629 919351 919352 919355 919356 919357 12 x 1 x 1¼ 3,023 919360 919370 919366 919367 919368 12 x 1½ x 1¼ 3,023 919379 919380 919376 919377 919378 12 x 2 x 1¼ 14 x 2 x 1¼ 3,023 2,592 919394 919460 919395 919461 919387 919443 919389 919445 919392 919455 OILFIELD DRILL PIPE HARD FACE GRINDING WHEELS CAUTION The wheels and speeds on this page are nonreinforced. They can be made with reinforcement for higher speed ratings within the ANSI B7.1 Standards. Inquiries will be quoted. Bushings are available for 1/2" , 5/8" and 1" grinder shafts. 14” and 12” wheels can be made with 1-1/2” arbors upon request. The wheels listed below are specially formulated to grind hard facing materials applied to oilfield drill pipe. They are a 24 grit silicon carbide with a proprietary bond. Size RPM C24 12 x 2 x 1-1/2 3023 919402 14 x 1 x 1-1/2 2592 919422 14 x 1 x 1-1/4 2592 919427 14 x 2x 1-1/4 2592 919465 14 x 2x 1-1/4 2592 919467 1-800-367-7291 Cat2016 33 FAX 517-279-7265 www.abrasiveproducts.net T-1 CUT-OFF WHEELS - 1½” to 4” DIAMETER Double reinforced for maximum safety on die grinders and other high speed tools. Sizes and specifications available to cut most materials. A24-TBF Very fast cutting of most metals where finish is not critical A36-TBF General purpose cutting of most ferrous metals A46-TBF Longer life cutting most ferrous metals A60-TBF For smoother cut on ferrous metals. C24-TBF GP cutting concrete/masonry and some nonferrous metals ALUMINUM OXIDE FOR FERROUS METAL Size 1½ x 1/32 x 1/8 1½ x 1/32 x 1/4 1½ x 1/16 x 1/8 1½ x 1/16 x 1/4 2 x 1/32 x 1/8 2 x 1/32 x 1/4 2 x 1/32 x 3/8 2 x 1/16 x 1/4 2 x 1/16 x 3/8 2 x 1/8 x 1/4 2 x 1/8 x 3/8 2 x 3/16 x 1/4 2 x 3/16 x 3/8 2½ x 1/32 x 1/4 2½ x 1/32 x 3/8 2½ x 1/16 x 1/4 2½ x 1/16 x 3/8 2½ x 1/8 x 1/4 2½ x 1/8 x 3/8 2-7/8 x 1/32 x 3/8 2-7/8 x 1/16 x 3/8 2-7/8 x 3/32 x 3/8 3 x 1/32 x 1/4 3 x 1/32 x 3/8 3 x 1/16 x 1/4 3 x 1/16 x 3/8 3 x 3/32 x 1/4 3 x 3/32 x 3/8 3 x 1/8 x 1/4 3 x 1/8 x 3/8 3 x 3/16 x 1/4 3 x 3/16 x 3/8 4 x 1/32 x 1/4 4 x 1/32 x 3/8 4 x 1/16 x 1/4 4 x 1/16 x 3/8 4 x 3/32 x 1/4 4 x 3/32 x 3/8 4 x 1/8 x 1/4 4 x 1/8 x 3/8 4 x 3/16 x 3/8 Max RPM Pack 40,760 40,760 40,760 40,760 30,550 30,550 30,550 30,550 30,550 30,550 30,550 30,550 30,550 24,450 24,450 24,450 24,450 24,450 24,450 21,270 21,270 21,270 25,000 25,000 25,000 25,000 20,370 20,370 20,370 20,370 20,370 20,370 19,000 19,000 19,000 19,000 15,280 15,280 15,280 15,280 15,280 50 50 50 50 50 50 50 50 50 40 40 30 30 50 50 50 50 40 40 50 50 50 50 50 50 50 50 50 40 40 30 30 50 50 50 50 50 50 40 40 30 1-800-367-7291 A24-TBF A36-TBF A46-TBF 906987 907014 907030 907090 907110 907144 907149 907015 907025 907105 907120 907145 907150 907020 907022 907095 907109 907146 907151 907428 907435 907508 907511 907430 907445 907509 907515 907427 907436 907506 907512 907410 907412 907411 907414 907600 907605 907620 907626 907637 907643 907662 907665 907603 907609 907623 907629 907641 907647 907663 907669 907598 907608 907619 907625 907634 907644 907664 907666 907750 907753 907769 907774 907784 907789 907813 907754 907755 907770 907775 907785 907795 907814 907747 907756 907767 907772 907786 907790 907812 Cat2016 34 A60-TBF 906990 906991 906989 906992 906999 907000 907001 907018 907023 907100 907108 907147 907152 907420 907421 907429 907446 907507 907513 907418 907409 907413 907590 907591 907604 907611 907618 907624 907636 907642 907661 907667 907739 907740 907748 907752 907768 907773 907783 907787 907811 1” diameter wheels are available on request. We can supply wheels for Dremel® type tools. See Page 30 for arbor mounts to use with these wheels FAX 517-279-7265 www.abrasiveproducts.net T-1 CUT-OFF WHEELS - 4½” - 10” FOR METAL CUTTING Double reinforced for safety, with sizes and specifications to cut most ferrous and nonferrous metals. A24-TBF Very fast cutting when finish is not critical A36-TBF General purpose cutting of most ferrous metals A46-UBF Longer wheel life cutting most ferrous metals A60-TBF For finer finishes, excellent on stainless steel Other specifications and sizes available on request. ALUMINUM OXIDE FOR FERROUS METAL CUTTING Size Max RPM Pack A24-TBF A36-TBF A46-UBF A60-TBF 4½ x 1/32 x 7/8 12,000 50 4½ x 1/16 x 7/8 12,000 40 6 x 1/32 x 1/2 10,500 10 910006 6 x 1/32 x 5/8 10,500 10 910007 907863 907865 6 x 1/32 x 7/8 10,500 10 910008 6 x 1/32 x 1¼ 10,500 10 910009 6 x 1/16 x 1/2 10,500 10 910038 910039 910040 910050 6 x 1/16 x 5/8 10,500 10 910054 910055 910060 910070 6 x 1/16 x 7/8 6 x 1/16 x 1¼ 6 x 3/32 x 1/2 10,500 10,500 10,500 10 10 10 910078 911030 910079 911040 910073 911050 910077 910075 911060 6 x 3/32 x 5/8 10,500 10 911150 911160 911090 911091 6 x 3/32 x 1 10,500 10 911165 911164 911163 911162 7 x 1/32 x 1/2 8,700 10 910145 7 x 1/32 x 5/8 8,700 10 910143 7 x 1/32 x 7/8 8,700 10 910144 7 x 1/32 x 1¼ 8,700 10 910142 7 x 1/16 x 1/2 8,700 10 910148 910149 910151 910150 7 x 1/16 x 5/8 8,700 10 910154 910155 910161 910170 7 x 1/16 x 7/8 8,700 10 7 x 1/16 x 1¼ 8,700 10 910216 910218 910225 910231 7 x 3/32 x 1/2 8,700 10 911272 911273 911271 911270 7 x 3/32 x 5/8 8,700 10 911274 911280 911277 911275 7 x 3/32 x 1 8,700 10 911282 911281 911283 911285 8 x 1/16 x 1/2 8,000 10 910244 910245 910250 910255 The following wheels are commonly used to cut graphite and steel golf shafts. 6 x 1/16 x 1/2 #910040 7 x 1/16 x 5/8 #910161 910171 8 x 1/16 x 5/8 8,000 10 910268 910270 910280 910290 8 x 1/16 x 1¼ 8,000 10 910297 910298 910284 910300 8 x 3/32 x 1/2 8,000 10 911521 911520 911519 911518 8 x 3/32 x 5/8 8,000 10 911538 911540 911545 911530 8 x 3/32 x 1 8,000 10 911542 911541 911543 911544 10 x 1/16 x 5/8 6,500 10 910395 910399 910400 910410 10 x 1/16 x 1¼ 6,500 10 910412 910413 910416 910415 10 x 3/32 x 5/8 6,500 10 911719 911720 911750 911760 10 x 3/32 x 1 6,500 10 911810 911820 911830 911840 10 x 1/8 x 5/8 6,500 10 924401 924400 924399 924398 10 x 1/8 x 1 6,500 10 924441 924440 924446 924430 1-800-367-7291 Cut Golf Shafts Cat2016 35 FAX 517-279-7265 www.abrasiveproducts.net T-1 CUT-OFF BLADES - 12” - 20” FOR METAL CUTTING Designed for metal cutting with heavy duty belt driven saws. Specifications are available for most applications. A24-TBF Fast cutting of most ferrous metals. Double reinforced for maximum strength. A24-TBZ Fast cutting of most ferrous metals. Zone reinforced for smoother, cooler cut. A36-TBF General purpose cutting of most ferrous metals. Double reinforced. A36-TBZ General purpose cutting of most ferrous metals. Zone reinforced for cooler cut. A46-TBF For finer finishes A60-TBF For very fine finishes FA24-TBF For cast iron and some nonferrous (Add 5% to aluminum oxide prices) Inquiries are invited for nonstandard applications. ALUMINUM OXIDE FOR FERROUS METAL Size 12 x 3/32 x 1 12 x 5/32 x 1 12 x 3/16 x 1 14 x 3/32 x 1 14 x 5/32 x 1 14 x 3/16 x 1 16 x 5/32 x 1 16 x 3/16 x 1 18 x 5/32 x 1 18 x 3/16 x 1 20 x 5/32 x 1 20 x 3/16 x 1 Max RPM Pack A24-TBF Ext Reinf 5,095 5,095 5,095 4,365 4,365 4,365 3,820 3,820 3,400 3,400 3,000 3,000 10 10 10 10 10 10 10 10 10 10 10 10 911930 912077 912100 911959 912158 912174 912209 912218 912229 912237 912257 912247 A24-TBZ Zone Reinf 914012 914007 914019 914027 914030 914056 914065 914080 914128 914160 A36-TBF Ext Reinf 911935 912080 912103 911960 912160 912175 912210 912223 912230 912238 912260 912250 A36-TBZ Zone Reinf 914015 914009 914020 914028 914040 914057 914070 914085 914130 914165 External reinforced have two outside full diameter fiberglass sheets. Zone reinforced have one internal full sheet and two outside partial diameter hub sheets. 1¼" arbors available. 1¾” for 18” and 20” wheels. Add $0.80 List for drive pin holes. CHOP SAW BLADES - 12” & 14” Designed for use on all popular tabletop chop saws. Ideal for cutting metal wall studs, structural shapes, wire rope, and tubing. Available specifications: Internal reinforced for smooth cutting A465-CR Clean cutting of tubing and small shapes A60-CR For finer finish cutting, cuts slower C24-CR For aluminum and other nonferrous alloy cutting only External reinforced A46-TBF General purpose metal cutting PREMIUM INTERNAL REINFORCED ALUMINUM OXIDE SIZE 12 x 3/32 x 1 14 x 3/32 x 1 16 x 3/32 x 1 Max RPM PACK A465-CR A60-CR C24-CR 5,095 4,365 3,820 10 10 10 915007 915012 915115 915006 915011 915114 915008 915016 915116 CAUTION These wheels are not for use on belt driven saws. Use them with direct drive table saws only. Always use a tool guard. EXTERNAL REINFORCED GENERAL PURPOSE Size 12 x 3/32 x 1 14 x 3/32 x 1 Max RPM 5,095 4,365 1-800-367-7291 PACK 10 10 A46-TBF 915022 915021 Cat2016 36 FAX 517-279-7265 www.abrasiveproducts.net ABRASIVE BLADES FOR PORTABLE SAWS Abrasive wheels for portable saws and construction tools. Double reinforced for safety. A36-TBF General purpose ferrous metal cutting C24-TBF General purpose concrete/masonry cutting. Also cuts aluminum. Size Max RPM PACK A36-TBF C24-TBF 10,500 10,500 10,500 9,500 9,500 9,500 8,700 8,700 8,700 8,000 8,000 8,000 6,500 6,500 10 10 10 10 10 10 10 10 10 10 10 10 10 10 924031 925041 6 x 1/8 x 5/8-Diamond 6 x 1/8 x 5/8-Diamond 6 x 1/8 x 5/8 6½ x 1/8 x 5/8-Diamond 6½ x 1/8 x 5/8-Diamond 6½ x 1/8 x 5/8 7 x 1/8 x 5/8-Diamond 7 x 1/8 x 5/8-Diamond 7 x 1/8 x 5/8 8 x 1/8 x 5/8-Diamond 8 x 1/8 x 5/8-Diamond 8 x 1/8 x 5/8 10 x 1/8 x 5/8 10 x 1/8 x 1 924050 924131 A36-TBF Carded C24-TBF Carded 9260302 9270402 9261302 9271102 9261602 9271802 9262602 9272602 925070 925111 924132 924161 925110 925181 924200 924271 925190 925261 924290 924400 924440 925270 925320 925330 ABRASIVE BLADES FOR CONSTRUCTION SAWS Designed for use on today's high powered gas and electric saws. Double reinforced with specifications to cut all materials. HSA-24 General purpose ferrous metal cutting HSA-30 For cutting ductile iron pipe HSC-15 Fast cut on concrete/masonry. Use for hard material and asphalt. HSC-35 General purpose concrete/masonry cutting. Excellent life. SAFETY NOTE: Be certain the maximum wheel RPM meets or exceeds the saw RPM. Max RPM Pack HSA-24 METAL HSA-30 DUCTILE HSC-15 CONC/MAS HSC-35 CONC/MAS 12 x 1/8 x 1 6,000 10 913140 913141 931133 931140 12 x 1/8 x 7/8 6,000 10 913130 913142 931136 931130 12 x 1/8 x 20mm 6,000 10 913150 913143 931137 931150 14 x 1/8 x 1 5,200 10 913152 913159 931188 931189 14 x 5/32 x 1* 5,200 10 913155* 931071* 931075* 14 x 1/8 x 7/8 5,200 10 913153 913160 931186 931190 14 x 1/8 x 20mm 14 x 5/32 x 20mm* 5,200 5,200 10 10 913154 913156* 913161 931187 931073* 931191 931077* Size * 5/32” thick blades are triple reinforced. RAIL CUTTING BLADES Specifically designed to cut rail and tracks using gasoline and hydraulic powered saws. The heavy reinforcement and special formulation provides for straight cuts with excellent wheel life. Size Max RPM Pack Part No 14 x 5/32 x 1 5,500 10 913200 16 x 5/32 x 1 4,800 10 913202 1-800-367-7291 Cat2016 37 FAX 517-279-7265 www.abrasiveproducts.net ABRASIVE BLADES FOR SLAB & MASONRY SAWS SPECIFICATIONS: C100 softest bond to C460 the hardest. C100 - Fast cutting of hard aggregate concrete and glazed brick C150 - General purpose cured concrete and medium hard brick C250 - Cured concrete with medium aggregate, common brick, and limestone C350 - Green concrete with medium aggregate, and combination brick/block C450 - Green concrete with soft aggregate, cement blocks, sandstone, and used brick C460 - Asphalt, green concrete with abrasive aggregate, long life on abrasive blocks Size Max RPM Pack C100 C150 C450 C460 12 x 1/8 x 1 5,500 10 930038 930040 930060 12 x 3/16 x 1 5,500 10 930028 930030 930034 14 x 1/8 x 1 4,500 10 930105 930110 930125 14 x 3/16 x 1 4,500 10 930200 930205 930220 930225 14 x 1/4 x 1 4,500 5 930298 930300 930315 930319 14 x 3/8 x 1 4,500 5 930318 930322 930327 930330 16 x 5/32 x 1 4,000 10 930400 930405 930420 16 x 3/16 x 1 4,000 10 930429 930431 930437 930438 16 x 1/4 x 1 4,000 5 930440 930422 930448 930450 18 x 5/32 x 1 3,400 10 930500 930505 930520 18 x 3/16 x 1 3,400 5 930538 930530 930540 930546 18 x 1/4 x 1 3,400 5 930548 930550 930560 930564 20 x 5/32 x 1 3,000 10 930596 930600 930612 20 x 3/16 x 1 3,000 5 930648 930650 930656 930670 20 x 1/4 x 1 3,000 5 930678 930680 930686 930688 930035 12” and 14” wheels have pin holes. For 16” and larger wheels pin holes must be specified. RUBBING BRICKS & FLOOR STONES Resin bonded silicon carbide to withstand rugged use. Floor stones are shipped finished sized to fit all machines. TERRAZZO STONES We can supply many of the popular stones for terrazzo grinding machines. Typical shapes are FW26, FW61, FW65, FR594, and FR600 See Page 27 for more information. Size Pack C10 C16 C24 C80 1 941210 941216 941224 941280 8" x 3½" x 1½" with handle 1 941810 941816 941824 941880 2" x 2" x 4" Floor Stone 12 942210 942216 942224 942280 Wedges for Floor Stones 1 941200 6" x 3" x 1" with handle 1-800-367-7291 Cat2016 38 FAX 517-279-7265 www.abrasiveproducts.net BACKUP PADS – RESIN FIBER DISCS SMOOTH FACE PADS These pads are made from proprietary thermoplastic rubber compounds that provides consistent properties over a wide range of temperatures. They are ideal pads for general purpose applications using resin fiber discs with grits 36 and finer . All pads are for discs with 7/8” holes except #151300 and #151296 are for 5/8” arbor hole sanding discs. Pad nuts are included. Part No Pad No Diameter Arbor Flex 151298 336-ST-5 4" 5/8-11 Medium 15,000 RPM 151300 491-ST-M102 4" M10x1.25 Medium 15,000 4” 151296 491-ST-M105 M10x1.5 Medium 15,000 151302 339-ST-5 4½" 5/8-11 Medium 13,000 151332 339-ST-M14 4½" M14 Medium 13,000 151310 335-SF-5 5" 5/8-11 Soft 12,000 151304 335-ST-5 5" 5/8-11 Medium 12,000 151305 335-ST-M14 5" M14 Medium 12,000 151306 309-ST-5 7" 5/8-11 Medium 8,500 151312 420-SF-5 7" 5/8-11 Soft 8,500 151308 326-ST-5 9" 5/8-11 Medium 6,600 RIBBED FACE PADS These pads are ideal for coarse grit grinding and most general purpose applications. Recommended for use with grits 50 and coarser. The pads have been redesigned with a flat shape and cooling holes to promote more cooling airflow through the ribs. Pad nuts are included. General purpose for light duty applications Part No Pad No 151294 525-VC-5 151342 Diameter Arbor Flex RPM 4” 5/8-11 Firm 13,000 707-VC-5 4½” 5/8-11 Firm 13,000 151338 708-VC-5 5” 5/8-11 Firm 12,000 151344 721-VC-5 7” 5/8-11 Firm 8,500 Heavy duty for severe applications. These pads are made with fiberglass reinforced plastic to provide more heat resistance and longer life. Part No 1-800-367-7291 Pad No Diameter 151314 707-HL-5 4½” 151340 707-HL-M14 151316 Flex RPM 5/8-11 Firm 13,000 4½” M14 Firm 13,000 708-HL-5 5” 5/8-11 Firm 12,000 151336 708-HL-M14 5” M14 Firm 12,000 151318 721-HL-5 7” 5/8-11 Firm 8,500 151320 527-HL-5 9” 5/8-11 Firm 6,600 Cat2016 39 Arbor FAX 517-279-7265 www.abrasiveproducts.net BACKUP PADS – RESIN FIBER DISCS MOLDED RUBBER AIR COOLED PADS Kasco’s “Spirub” molded rubber pads feature spiral cooling fins. They are available in four sizes and with or without the retaining nut. These pads are comparable to any molded rubber pads on the market. All pads in this series are for 5/8-11 tool shafts. Part No Pad No Description 151751 601-SR45M 4½" Spirub RFD pad Medium, 13,500 RPM 151751N 601-SR45MN 4½" Spirub RFD pad Medium, 13,500 RPM w/nut 151752 601-SR50M 5" Spirub RFD pad Medium, 13,000 RPM 151752N 601-SR50MN 5" Spirub RFD pad Medium, 13,000 RPM w/nut 151753 601-SR70M 7" Spirub RFD pad Medium, 8,600 RPM 151753N 601-SR70MN 7" Spirub RFD pad Medium, 8,600 RPM w/nut 151754 601-SR70F 7" Spirub RFD pad Flexible, 8,600 RPM 151754N 601-SR70FN 7" Spirub RFD pad Flexible, 8,600 RPM w/nut 151756 601-SR90M 9" Spirub RFD pad Medium, 6,600 RPM 151756N 601-SR90MN 9" Spirub RFD pad Medium, 6,600 RPM w/nut Diam Spiralcool Kasco 4-1/2” R425 151751 5” R500-R 151752 7” R700-R 151753 7” F700-R 151754 9” R900-R 151756 151550 Adjustable Wrench INTERCHANGEABLE PLATE SYSTEM Kasco’s patented plate system for 7” resin fiber discs offer both end-users and distributors maximum flexibility and performance. A precision hub threads on to the tool’s 5/8-11 shaft. A total of six backing plates are available that attach the hub with a quarter turn. There are four smooth face flexes and two ribbed face flexes. This system allows users to change disc flexes without replacing the entire pad. It also is more cost effective to replace the plates than an entirely new pad. All are rated at 8,500 Max RPM. Part No Pad No Description Color 151707S 422-BLK-S 7” Smooth face Firm Black 151706S 422-GRY-S 7” Smooth face Medium Firm Gray 151705S 422-BLU-S 7” Smooth face Medium Soft Blue 151704S 422-ORG-S 7” Smooth face Soft Orange 151708S 423-BLK-S 7” Ribbed face Firm Black 151709S 423-GRY-S 7” Ribbed face Medium Gray Plate 422-BLU attached to the hub. 1-800-367-7291 Cat2016 40 FAX 517-279-7265 www.abrasiveproducts.net BACKUP PADS – DUAL ACTION PADS – PSA Kasco random orbit DA pads for PSA adhesive backed abrasive discs are constructed with a blue vinyl face and a strong fiberglass or glass reinforced poly back plates. Available in the classic tapered edge style and the newer low profile square edge Soft Edge DA Pad TAPERED EDGE PADS WITH FIBERGLASS BACK Tapered Edge DA Pad Part No Pad No Diameter Arbor Flex Surface Vac Ø Foam Max RPM 151376 528-DAA 5” 5/16" male Med-Firm Blue Vinyl None Yellow 12,000 151378 530-DAAV 5” 5/16" male Med-Firm Blue Vinyl 5 Yellow 12,000 151370 498-DAA 5” 5/16" male Med-Soft Blue Vinyl None Yellow 12,000 151822 580-DAA 5” 5/16" male Soft Edge Blue Vinyl None Yellow 12,000 151365 501-DAAV 5” 5/16" male Med-Soft Blue Vinyl 5 Yellow 12,000 151380 531-DAA 6” 5/16" male Med-Firm Blue Vinyl None Yellow 12,000 151382 532-DAAV 6” 5/16" male Med-Firm Blue Vinyl 6 Yellow 12,000 151374 496-DAA 6” 5/16" male Med-Soft Blue Vinyl None Yellow 10,000 151372 151387 497-DAAV 506-DAAV 6” 6” 5/16" male 5/16" male Med-Soft Med-Soft Blue Vinyl Blue Vinyl 6 8 Yellow Yellow 10,000 10,000 TAPERED EDGE PADS WITH GLASS REINFORCED POLY BACK PLATE Kasco glass reinforced poly back pads provide the latest technology in a cost saving design. Use these pads as a substitute for the fiberglass backed pads listed above. The corresponding pad style is listed in parenthesis. Part No Pad No Diameter Arbor Flex Surface Vac Ø Foam Max RPM 151811 151812 625-DAA (528) 5” 5/16" male Med-Firm Blue Vinyl None Yellow 13,000 650-DAA (498) 5” 5/16" male Med-Soft Blue Vinyl None Yellow 12,000 151818 627-DAA (531) 6” 5/16" male Med-Firm Blue Vinyl None Yellow 12,000 151815 652-DAA (496) 6” 5/16" male Med-Soft Blue Vinyl None Yellow 10,000 Max RPM LOW PROFILE PAD FOR SOFTER EDGE Kasco low profile pads have a soft outer edge. They are popular for both woodworking and automotive applications. Part No Pad No Diameter Arbor Flex Surface Vac Ø Foam 151720 505-DAA 5” 5/16" male Med-Soft Blue Vinyl None Yellow 10,000 151721 597-DAAV 5” 5/16" male Med-Soft Blue Vinyl 5 Yellow 10,000 151722 474-DAA 6” 5/16" male Med-Soft Blue Vinyl None Yellow 10,000 151723 487-DAAV 6” 5/16" male Med-Soft Blue Vinyl 6 Yellow 10,000 All pads of this page are for PSA adhesive back sanding discs See Page 47 for Interface Pads 1-800-367-7291 Cat2016 41 FAX 517-279-7265 www.abrasiveproducts.net BACKUP PADS – DUAL ACTION PADS – H&L Kasco random orbit DA pads for hook & loop backed abrasive discs are constructed with a strong fiberglass or glass reinforced poly plate. Available in the classic tapered edge style and the newer low profile square edge style. 542-DAHV52 TAPERED EDGE PADS WITH FIBERGLASS BACK Part No 151736 151384 Pad No 542-DAHV52 528-DAH Diameter Arbor Flex Surface Vac Ø Foam Max RPM 3” 5” 5/16" male 5/16" male Med-Soft Med-Firm H&L H&L None None Yellow Black 12,000 12,000 151386 530-DAHV 5” 5/16" male Med-Firm H&L 5 Black 12,000 151371 498-DAH 5” 5/16" male Med-Soft H&L None Yellow 12,000 151821 580-DAH 5” 5/16" male Soft Edge H&L None Yellow 12,000 151367 501-DAHV 5” 5/16" male Med-Soft H&L 5 Yellow 12,000 151393 500-DAHV 5” 5/16" male Med-Soft H&L 8 Yellow 12,000 151388 531-DAH 6” 5/16" male Med-Firm H&L None Black 12,000 151390 532-DAHV 6” 5/16" male Med-Firm H&L 6 Black 12,000 151391 151375 533-DAHV 496-DAH 6” 6” 5/16" male 5/16" male Med-Firm Med-Soft H&L H&L 8 None Black Yellow 10,000 10,000 TAPERED EDGE PADS WITH GLASS REINFORCED POLY BACK PLATE Kasco glass reinforced poly back pads provide the latest technology in a cost saving design. Use these pads as a substitute for the fiberglass backed pads listed above. The corresponding pad style is listed in parenthesis. Part No Pad No Diameter Arbor Flex Surface Vac Ø Foam Max RPM 13,000 151810 625-DAH (528) 5” 5/16" male Med-Firm H&L None Black 151813 650-DAH (498) 5” 5/16" male Med-Soft H&L None Yellow 12,000 151817 627-DAH (531) 6” 5/16" male Med-Firm H&L None Black 12,000 151816 652-DAH (496) 6” 5/16" male Med-Soft H&L None Yellow 10,000 LOW PROFILE DA PADS FOR SOFTER EDGE KASCO low profile pads have a soft outer edge. These are popular for both woodworking and automotive applications. Part No Pad No Diameter Arbor Flex Surface Vac Ø Foam Max RPM 151397 598-DAH 4½” 5/16" male Med-Soft H&L 151725 505-DAH 5” 5/16" male Med-Soft H&L None Yellow 12,000 None Yellow 10,000 151726 597-DAHV 5” 5/16" male Med-Soft H&L 5 Yellow 10,000 151727 474-DAH 6" 5/16" male Med-Soft H&L None Yellow 10,000 151728 487-DAHV 6" 5/16" male Med-Soft H&L 6 Yellow 10,000 All pads of this page are for hook & loop back sanding discs See Page 47 for Interface Pads 1-800-367-7291 Cat2016 42 FAX 517-279-7265 www.abrasiveproducts.net BACKUP PADS - STRAIGHT ROTATION - H&L DISCS KASCO straight rotation pads (not dual action DA) are typically used in finishing and polishing applications with hook & loop backed abrasive discs. Pads with water feed holes can be used with diamond pads for polishing of marble, granite and other ceramic materials in a wet mode. These pads are for use with paper or cloth discs, or with diamond polishing pads. They are not suitable for SCD discs. See the pads on Page 43 for use with SCD discs. Part No Pad No Diameter Arbor Foam Water Ø Max RPM 151052 SP2-3-H 2" 1/4” Shank 3/4" No 6,000 151053 SP3-3-H 3" 1/4” Shank 3/4" No 6,000 151402 418-1MH3125-5 3" 5/8-11 1/2” No 20,190 151405 355-1MH3126W-5 3" 5/8-11 1/2” Yes 20,190 151406 355-1MH3125-3 3" 3/8-24 1/2” No 20,190 151409 399-1MH3126W-5 4" 5/8-11 1/2” Yes 15,000 151606 399-1LHW-5 4” 5/8-11 None Yes 15,000 151601 375-1LH-5 4½" 5/8-11 None No 13,000 151414 376-1MH3126W-5 5" 5/8-11 1/2” Yes 12,000 151607 376-1LHW-5 5" 5/8-11 None Yes 12,000 151605 376-1LH-5 5" 5/8-11 None No 12,000 151611 376-1LH-M14 5" M14 None No 12,000 151429 314-1MH3126W-5 6" 5/8-11 1/2” Yes 10,000 151602 314-1LH-5 6” 5/8-11 None No 10,000 151430 392-1MH3126W-5 7" 5/8-11 1/2” Yes 8,500 151617 392-1LH-5 7" 5/8-11 None No 8,500 151433 337-1MH3126W-5 8” 5/8-11 1/2 Yes 7,570 151434 337-1MH3426-5 8” 5/8-11 3/8 No 7,570 Water feed Spindle pad for hook & loop discs. BACKUP PADS – STRAIGHT ROTATION – PSA & GLUE DISCS KASCO straight rotation (not dual action) pads for PSA and glue on discs come in a wide selection of sizes and configurations. All PSA pads have a blue vinyl face. This section includes spindle pads. The canvas surface pad is for glue on abrasive discs. Part No Pad No Diameter Arbor Flex Surface Max RPM 151039 405-AM-4S 3/4” 1/4” Shank Medium Blue Vinyl 40,000 151040 413-AM-4S 1” 1/4” Shank Medium Blue Vinyl 30,000 151042 406-AM-4S 1½” 1/4” Shank Medium Blue Vinyl 19,000 151044 407-AM-4S 2” 1/4” Shank Medium Blue Vinyl 19,000 151048 409-AM-4S 3” 1/4” Shank Medium Blue Vinyl 19,000 151417 640-A-5 5” 5/8-11 Med-Soft Blue Vinyl 6,875 151444 580-AS-5 5” 5/8-11 Soft Edge Blue Vinyl 6,875 151445 581-AS-5 5” 5/8-11 Thick Edge Blue Vinyl 6,875 151446 581-GS-5 5” 5/8-11 Thick Edge Canvas 6,875 151418 641-A-5 6” 5/8-11 Med-Soft Blue Vinyl 5,730 151424 642-A-5 7” 5/8-11 Med-Soft Blue Vinyl 4,910 Tapered Edge Style Soft Edge Style Spindle Pads 1-800-367-7291 Cat2016 43 FAX 517-279-7265 www.abrasiveproducts.net BACKUP PADS – GRIPPER FOR SCD DISCS KASCO pads for nonwoven surface conditioning discs (SCD) have a Gripper “T” extra long hook surface on a flexible molded thermal plastic base. The 5/8-11 arbor pads have flats on the back for easy installation and removal from the tool arbor. All gripper pads are industrial grade. This style pad is not recommended for use with hook & loop backed paper or cloth sanding discs. STRAIGHT ROTATION SCD PADS Part No Pad No Diameter Arbor Flex Surface Max RPM 151179 406-GR-4S 1½” 1/4" shank Medium Gripper T 19,000 151364 407-GR-4S 2” 1/4" shank Medium Gripper T 19,000 151366 409-GR-4S 3” 1/4" shank Medium Gripper T 11,000 151403 399-1MT31-5-B 3-1/2” 5/8-11 Med-Soft Gripper T 13,200 151347 399-GR-4S 4” 1/4" shank Medium Gripper T 15,000 151350 399-GR-5 4” 5/8-11 Medium Gripper T 15,000 151410 399-1MT3126-5-B 4” 5/8-11 Soft Gripper T 15,000 151352 375-GR-5 4½” 5/8-11 Medium Gripper T 13,000 151354 375-GR-M14 4½” M14 Medium Gripper T 13,000 151356 376-GR-5 5” 5/8-11 Medium Gripper T 12,000 151404 376-1MT31-5-B 5” 5/8-11 Soft Gripper T 12,000 151358 376-GR-M14 5” M14 Medium Gripper T 12,000 151415 376-1MT3126-5-B 5” 5/8-11 Soft Gripper T 12,000 151348 314-GR-5 6” 5/8-11 Medium Gripper T 10,000 151360 392-GR-5 7” 5/8-11 Medium Gripper T 8,500 151362 392-GR-M14 7” M14 Medium Gripper T 8,500 151355 392-1MT3126-5 7” 5/8-11 Soft Gripper T 8,500 Random Orbit DA Pads for SCD Discs 151369 401-DAT 4½” 5/16-24 1/2” Foam Gripper T 13,000 151385 151381 4015-DAT 403-DAT 5” 6” 5/16-24 5/16-24 1/2” Foam 1/2” Foam Gripper T Gripper T 12,000 10,000 1-800-367-7291 Cat2016 44 DA Pads for SCD Discs FAX 517-279-7265 www.abrasiveproducts.net HOLDERS FOR QUICK CHANGE DISCS HEAVY DUTY COMBO STYLE KASCO heavy duty style holders are available for both Type R “Rolloc®” style and Type S metal clip style quick change discs. Each holder comes with a standard 1/4” straight shank, and can also be used on tools with 5/8-11 arbors as noted to the right. Our holders are heavy duty for the most demanding industrial applications. FOR TYPE R ROLLOC® STYLE DISCS Part No Pad No FOR TYPE S CLIP STYLE DISCS Diam Flex Part No Pad No Diam Flex 151202 563-QL-4S 1½” Med 151208 563-QC-4S 1½” Med 151217 563-QLS-4S 1½” Soft 151215 563-QCS-4S 1½” Soft 151204 564-QL-4S 2” Med 151210 564-QC-4S 2” Med 151221 564-QLS-4S 2” Soft 151219 564-QCS-4S 2” Soft 151206 565-QL-4S 3” Med 151225 565-QL-M14 3” Med 151212 565-QC-4S 3” Med 151226 565-QC-M14 3” Med LOW PROFILE STYLE Our low profile holders offer an overall lighter tool for up to medium duty applications. Each comes with a 1/4” shank that threads into the holder body. FOR TYPE R ROLLOC® STYLE DISCS Part No Pad No Diam FOR TYPE S CLIP STYLE DISCS Flex Part No Diam Flex 592-QC-4S Pad No 1” Med 151200 592-QL-4S 1” Med 151199 151203 593-QL-4S 1½” Med 151209 593-QC-4S 1½” Med 151205 594-QL-4S 2” Med 151211 594-QC-4S 2” Med 151207 595-QL-4S 3” Med 151213 595-QC-4S 3” Med TRADITIONAL RUBBER HOLDERS Kasco rubber holders are a high quality and cost effective version of the traditional pads used industry wide. Available in Type R and Type S for the two most popular disc styles. RUBBER HOLDERS - TYPE R Part No Pad No RUBBER HOLDERS - TYPE S Diam Flex Part No Pad No Diam Flex 151453 945-QL-4S 1” Med 151462 945-QC-4S 1” Med 151454 946-QL-4S 1½” Med 151463 946-QC-4S 1½” Med 151455 947-QL-4S 2” Med 151456 151457 151459 948-QL-4S 949-QL-4S 951-QL-5 3” 4” 4” Med Med Med 151464 151465 947-QC-4S 948-QC-4S 2” 3” Med Med Pad 151459 has a 5/8-11 female arbor. 1-800-367-7291 Cat2016 45 FAX 517-279-7265 www.abrasiveproducts.net HAND PADS – FOR DISCS AND SHEETS KASCO hand pads are ideal for a wide variety of woodworking, automotive and general fabrication applications. A unique design that quickly converts 5” or 6” diameter abrasive discs into a hand sander. The pads are ergonomically designed to fit the user’s hand. Flexible foam pads with an adjustable H&L wrist strap. Foam is 1/4” thick. Ideal for sanding curved surfaces. Part No Pad No Abrasive Part No Pad No Abrasive 151774 171-HPA5 5” PSA Disc 151243 596-HBA5 5” PSA Disc 151775 171-HPH5 5” H&L Disc 151245 596-HBH5 5” H&L Disc 151776 172-HPA6 6” PSA Disc 151242 550-HBA6 6” PSA Disc 151777 172-HPH6 6” H&L Disc 151244 550-HBH6 6” H&L Disc 544 Shape 545 Shape Allows use of a 5” x 2¾” sheets for hand sanding. The blocks are yellow foam. Part No Pad No Abrasive 151250 544-HBA5 5” x 2¾” PSA Paper 151252 544-HBH5 5” x 2¾” H&L Paper 151258 545-HBA5 5” x 2¾” PSA Paper 151260 545-HBH5 5” x 2¾” H&L Paper Allows the use of a standard H&L or PSA discs for hand sanding. The 5” pad is a soft yellow foam and the 6” is firmer black foam. Part No Pad No Abrasive 151268 541-HBH3WS 3” H&L Disc 151257 538-HBH5WS 5” H&L Disc 151256 538-HBA5WS 5” PSA Disc 151255 539-HBH6-H 6” H&L Disc 151253 539-HBA6-H 6” PSA Disc Use 5” x 2-3/84” sheets either PSA or H&L. One side of block is firm and the other side is soft for sanding curved surfaces. Part No Pad No Abrasive 151265 116-HBA-81 5” x 2¾” PSA Paper 151263 116-HBH-81 5” x 2¾” H&L Paper 1-800-367-7291 Cat2016 46 FAX 517-279-7265 www.abrasiveproducts.net INTERFACE PADS Interface pads are used to soften the action of the primary pad like a DA or spindle pad. They are constructed with a thick foam layer that provides ideal action for fine grits and polishing applications. The side of the interface pad that mates to the primary pad is Velcro®, and the opposite side is either Velcro® or vinyl for PSA. Part No Pad No Diam Thick Effect 151031 2IP-HB-1/4 2” 1/4” Firm Tool Side Disc Side Velour H&L Vac Ø None 151032 2IP-SW-1/4 2” 1/4” Soft Velour H&L None 151033 2IP-SG-3/4 2” 3/4” Soft Velour H&L None 151037 3IP-SW-1/4 3” 1/4” Soft Velour H&L None 151038 3IP-SG-3/4 3” 3/4” Soft Velour H&L None 151005 3DAP-VVN 3” 1/2” Soft Velour H&L None 151002 5DAP-VVN 5” 1/2” Soft Velour H&L None 151004 5DAP-VV5 5” 1/2” Soft Velour H&L 5 151008 5DAP-VPN 5” 1/2” Soft Velour PSA None 151010 5DAP-VP5 5” 1/2” Soft Velour PSA 5 151014 6DAP-VVN 6” 1/2” Soft Velour H&L None 151020 6DAP-VPN 6” 1/2” Soft Velour PSA None BACKUP PAD ACCESSORIES Part No Item No Type INSERTS TO CONVERT ARBORS 151536 I-045-5-3 Insert 5/8-11 to 3/8-24 151532 I-045-5-M102 Insert 5/8-11 to M10x1.25 151534 I-045-5-M105 Insert 5/8-11 to M10x1.5 151528 I-045-M-3 Insert M14 to 3/8-24 151524 I-045-M-M102 Insert M14 to M10x1.25 151531 I-125-M-4S Adapter M14 to 1/4 shank 151529 I-125-5-4S Adapter 5/8-11 to 1/4 shank SPARE NUTS FOR RFD PADS 151514 N-005-5 5/8-11 Nut for 7" and 9" RFD 151516 N-005-M14 M14 Nut for 7" and 9" RFD 151522 N-009-3 3/8-24 Nut for 4" x 5/8" RFD 151518 N-009-M102 M10x1.25 Nut for 4" x 5/8" RFD 151520 N-009-M105 M10x1.5 Nut for 4" x 5/8" RFD 151510 N-016-5 5/8-11 Nut for 4½" and 5" RFD WRENCH FOR RFD PADS 151550 W-061 Spanner wrench - Adjustable Backup Pad Capabilities We operate the newest backup pads manufacturing plant in North American. In addition to the pads listed in this catalog we can produce custom pads for many applications. Private labeling is available. Please contact us with your specific needs. 1-800-367-7291 Cat2016 47 FAX 517-279-7265 www.abrasiveproducts.net GENERAL SAFETY INFORMATION DO LIST DO always handle and store wheels in a careful manner. Store in a dry area with minimum climate control. Avoid large temperature swings and high humidity. DO visually inspect all wheels before mounting and using for possible damage. DO make sure the TOOL MAXIMUM OPERATING SPEED DOES NOT EXCEED THE WHEEL RATED SPEED. This rule is especially applicable to pneumatic tools with speed regulators. DO check the mounting flanges to be certain they are of equal diameter and the correct size. Use mounting blotters when supplied with wheels. DO use BREATHING PROTECTION when grinding for long time period. Abrasive dust can cause respiratory ailments. DO always USE A SAFETY GUARD on all tools. The guard should cover at least 1/2 of the wheel diameter. DO allow newly mounted wheels to run at operating speed for few moments prior to engaging the work piece. DO always WEAR SAFETY GLASSES when grinding. The addition of a full face shield is recommended for heavy grinding jobs. DO only grind or cut material for which the wheel was designed. DON’T LIST DON'T use a wheel that has been dropped or mishandled. DON'T force a wheel onto a machine arbor or alter the size of mounting hole. If a wheel won't fit the machine, get one that will. DON'T use a tool that has had the wheel guard removed or is missing. Don’t remove the wheel guard to make the wheel fit. DON'T ever EXCEED THE MAXIMUM OPERATING RPM SPEED listed on the wheel. DON'T use mounting flanges that are not clean and flat, or of different diameters. DON'T excessively tighten the mounting nuts. DON'T grind on the side of any Type 1 flat wheel. When using depressed center Type 27 wheels, grind a minimum of 15° angle above the work plane. NEVER GRIND FLAT. DON'T jam the wheel into the work piece. DON'T stand directly in front of a wheel whenever the tool is started. When grinding or cutting, stand away from the spark line. DON'T use a grinding wheel for an application other than for which it was designed. DO become familiar with and follow the provisions of American National Standard ANSI B7.1. Abrasive products are safe when used in a cautious manner, and in accordance with the safety guidelines listed above. Safety must be promoted by all sellers, purchasers, and users of abrasives. SAFETY GLASSES Safety glasses must be worn when using all abrasive products. We carry a line a safety glasses and goggles for our distributors and customers. Please call 1-800-367-7291 for more information 1-800-367-7291 Cat2016 48 FAX 517-279-7265 KASCO ABRASIVES warrants its products to be free from defect, and will replace any item proven to be defective. The user assumes all other risks including the suitability of the products for the intended use. No other warranty is expressed or implied. Proudly Distributed By: KASCO ABRASIVES DIVISION OF VACHON INDUSTRIES P O Box 383, 580 Race St, Coldwater, MI 49036 TEL: 1-800-367-7291, 517-278-2354 FAX: 517-279-7265 Email: [email protected] www.abrasiveproducts.net
Similar documents
Cat2011 Pg4-19 - Kasco Abrasives
resin fiber disc for many applications. Not recommended for
stainless steel work. Use
• L.7874
1000 pcs
per box