MT engelska.korr 03 p65

R
a simple solution to a difficult problem
an ergonomically tested device
to prevent mouse arm
Variety is important
MouseTrapper gives a natural and ergonomi-cally
correct working position, with your arms centered
against your body. With MouseTrapper, you can
easily lift the mouse out of its holder and continue
working, without affec-ting your current
document. By alternating working with the mouse
and MouseTrapper, and also carrying out the
minipause exercises that are enclosed free of charge
on the CD, you will be well-protected from injuries
and conditions such as mouse arm, stiff neck, and
painful shoulders.
MouseTrapper has been tested scientifically and is
recommended by leading safety engineers, ergonomists and physical therapists. The completely
mechanical MouseTrapper, combined with the electronic IntelliMouse, form a perfect combination for
creating variety at work. It takes ten seconds to install
MouseTrapper, and it is just as easy to switch back to
only working with the mouse. Simple, ingenious and
safe.
Easy to use
MouseTrapper is easy to mount and use. When
working with MouseTrapper you place the cursor on
the screen by rolling and/or pushing the control bar
of the MouseTrapper. Click MouseTrappers buttons
to transfer the ”click” function to the mouse.
Installation
MouseTrapper is easy to install. Place MouseTrapper
along the lower edge of your keyboard. Place the
Microsoft IntelliMouse in the mouse holder so that
the buttons of the mouse are accessible, pointing
toward you. Make sure the buttons of the mouse are
placed under the two small arms/hooks that are
affected by MouseTrapper’s key /click buttons. Plug
the mouse into the back of the computer, directly in
the mouse port or using an adapter. Remember to
turn off the computer when you install the mouse.
The IntelliMouse driver is enclosed on a disc.
There is nothing more important than variety when
it comes to avoiding problems like mouse arm, sore
shoulders, and a stiff neck. With MouseTrapper you
will come as far as y possible in achieving maximum
variation in your work. When you want a change you
simply lift the mouse out of the mouse holder and
use it the traditional way, without affecting your
document at all.
Fits all computers
MouseTrapper is available for all computers that
use 1-2 button mice. A separate driver is enclosed
for the Macintosh.
With its latest refinements, MouseTrapper Mark III is
just about optimal. Now it is important for us to provide you with information enabeling you to take full
advantage of the possibility to varying your work position. Therefore we enclose on CD a pause program
called ”MiniPause” with exercises that increase blood
circulation and loosen up stiff muscles.
MouseTrapper Mark III is complete and includes mouse adapter,
wrist support, distance spacer to adapt to different keyboards,
Microsoft IntelliMouse and IntelliPoint software. In addition a
CD with Minipause exercises is enclosed.
Sales and marketing
TestLab-System A/S
Metalvej 7
DK-4000 Roskilde
Telf. +45 46 74 05 05
Fax. +45 46 74 05 10
www.testlab.dk
Distributor: