Books, Software, Associations, Automotive, Locks, Safes, Manuals

Transcription

Books, Software, Associations, Automotive, Locks,
Safes, Manuals, Educational Materials!
PRODUCT INDEX
2—3
SOFTWARE
4—8
GENERAL LOCKSMITHING
8 — 14
AUTOMOTIVE SERVICE
14 — 15
LOCK SERVICE
16 — 17
SAFE OPENING
18 — 23
ASSOCIATIONS
23 —24
THE NATIONAL LOCKSMITH MAGAZINE
25
ORDER FORM
26
Credit Card Orders
Fill out the Order Form on the last page and
then phone, fax, or e-mail your order to us.
National Publishing Co.
97592 Eagle Way
Chicago, IL 60678-9750
Phone: 630-837-2044
Fax: 630-837-1210
eMail: [email protected]
Web: TheNationalLocksmith.com
CATALOG #2015-02
We are the only source you need for locksmithing information.
PRODUCT INDEX
10 Years Of Dave McOmie____________________________________________20
10 More Years Of Dave McOmie_______________________________________20
15 Minute Safe Opening Technique_____________________________________18
15 Minute Safe Opening Technique on CD________________________________ 8
15 Minute Simplex Install & Other Neat Stuff_____________________________14
Advanced Master Keying Skills__________________________________________ 9
Advanced Wafer Lock Reading_________________________________________16
Aluminum Stile Door Service & Repair___________________________________13
Aluminum Stile Door Service & Repair on CD______________________________ 5
Antique Padlocks____________________________________________________13
Ask Dave__________________________________________________________21
Auto Lock Service___________________________________________________15
Basic Electronic Access Control________________________________________10
Basic Electronic Access Control on CD___________________________________ 6
Basic Electricity_____________________________________________________10
Basic Master Keying-QBE_____________________________________________ 9
Basic Mater Keying Course on CD_______________________________________ 8
Best Of Dale Libby___________________________________________________20
Bread & Butter______________________________________________________18
Certification Program____________________________________________ 11-12
Cryptology For Locksmiths_____________________________________________ 9
Dave McOmie On Gun Safes__________________________________________20
Dave McOmie On Hinged Round Doors Volume 1_________________________22
Dave McOmie On Lift-Out Round Doors_________________________________21
Dave McOmie On Safe Locks__________________________________________21
Dave McOmie On Vault Doors Volume 1 – Bank Vaults_____________________19
Dave McOmie On Vault Doors Volume 2 – Fire & Plate Vaults_______________19
Dave McOmie’s Penetration Party_______________________________________19
Dave McOmie’s “Pen” Parties DVD______________________________________18
Diary Of A Safeman__________________________________________________22
Don O’Shall’s 2012 Guide To Interchangeable Core Servicing________________17
Door Lock Encyclopedia______________________________________________16
Drilling Safes_______________________________________________________20
Fast Facts 2011_____________________________________________________14
Flat Rate Manual____________________________________________________13
GM Sidebar Lock Decoder System______________________________________15
Guide To Electronic Locksmithing_______________________________________10
Guide To Motorcycles Volumes 1, 2, 3, 4, 5, 6 & 7_________________________15
Guide To Motorcycles Volume 1, 2, 3, 4, 5, 6 & 7 on CD_____________________ 7
High Security Safes Volume 1_________________________________________21
High Security Safes Volume 2_________________________________________21
2 |
THE NATIONAL LOCKSMITH
|
Since 1929
PRODUCT INDEX
How To Jumpstart Your Locksmith Business______________________________10
How To Jumpstart Your Locksmith Business on CD_________________________ 5
How To Shake The Shekel Tree________________________________________10
InstaCode LIVE_______________________________________________________ 4
Institutional Lock Shop Management_____________________________________ 9
Interchangeable Core Cylinder Service___________________________________16
Interchangeable Core: Small Format_____________________________________17
Interchangeable Core: Small Format on CD________________________________ 7
Lock Repair Manual__________________________________________________17
Lockin’ Up__________________________________________________________10
Lockin’ Up on CD_____________________________________________________ 6
Lockmsmithing 101___________________________________________________ 8
Manipulation Home Study Course______________________________________23
Master Key System-Specification, Application and Management______________ 9
Masterkeying Textbook Second Edition___________________________________ 8
MK Express_________________________________________________________ 5
Modern Safe Locks__________________________________________________23
Modern Safe Opening________________________________________________19
More Bread and Butter_______________________________________________18
Motorcycle Lock Service______________________________________________15
NLAA Auto Service Guide On CD_______________________________________ 8
NLAA (National Locksmith Automobile Assn Membership)__________________23
NSO (National Safeman’s Organization Membership)_______________________24
Picking & Impressioning______________________________________________17
Pure Jake-The Book__________________________________________________ 9
Removable Cores: Large Format________________________________________17
Removable Cores: Large Format on CD___________________________________ 6
Revised GM Steering Column Course___________________________________14
Safe Deposit Box Service_____________________________________________21
Safe Opening Articles________________________________________________23
Safe Opening Articles 1987___________________________________________22
Safe Opening Volumes 1, 2 & 5________________________________________19
Service With A Smile_________________________________________________13
Sieveking Auto Key Guide & Illustrated Cross Reference____________________14
Small Format Interchangeable Cores: Advanced___________________________17
Small Format Interchangeable Cores: Advanced on CD______________________ 7
The National Locksmith Digital Archives__________________________________ 6
The National Locksmith Magazine Subscription___________________________25
Total Door Service and Repair___________________________________________ 9
Total Door Service and Repair on CD_____________________________________ 6
Tubular Lock Service_________________________________________________16
Ultimate Technitips Collection__________________________________________13
Wafer Lock Reading__________________________________________________14
|
Since 1929
| 3
SOFTWARE
InstaCode LIVE
r Just Codes (General Codes) — $10.00 per month
r Add-On Finding Bitting & Wafer Swapper — $3.00 per month
r Just Automotive (Auto Codes) — $10.00 per month
r Add-On Transponder, Remotes Diagnostic Info — $3.00 per month
r Add-On Car Opening — $3.00 per month
r The Works (Both Just Codes & Automotive Codes) — $20.00 per month
r Add-On Transponder, Remotes Diagnostic Info — $3.00 per month
r Add-On Car Opening — $3.00 per month
r The Deluxe (Includes everything) — $29.99 per month
InstaCode LIVE is now the most comprehensive knowledge base for Locksmiths in the world.
In a mobile world access is key. With more than 132 key blank manufacturers, 8,000 key code
series, 70,000 references and 3 billion key code.
Available on iOS, Android and Windows.
CREDIT CARD ORDERS…
Fill out the order form on page 26 and…
phone, fax or e-mail your order in!
phone: 630-837-2044
fax: 630-837-1210
email: [email protected]
web: TheNationalLocksmith.com
4 |
|
Since 1929
COMPLETE AND RETURN ORDER
FORM ON PAGE 26 TO…
97592 Eagle Way
SOFTWARE
MK Express
#WH-MKEXPRESS — $348 (includes FREE Live Updates for 12 Months.)
Looking for Master Keying Software that is simple to use? You just found it. From the team
that brought you InstaCode.
• Create a Master Key System in under 1 minute!
• Create large and complete Master Keying Systems with NO previous experience!
• The quickest and easiest Master Keying Software in the world!
The name says it all, MK Express, this quick and easy to use Master Keying Software will
create master keying systems for all major manufacturers of both Standard Inline and
Interchangable Core Cylinders.
• Support for multiple locks systems • Quick generation of entire systems • Reporting
• Importing of existing systems.
Full support — Over 75 years combined experience in the locksmith industry.
Framework — MK Express runs standalone on a single PC.
Easy Setup — You will be running in just a few minutes.
Clean Design — MK Express is designed to be as simple to use as possible.
Video Tutorials — Regular how-to videos explain new and existing features.
Updates — MK Express will automatically check for updates and simply notify you when it is ready to install.
How To Jumpstart Your Locksmith Business or
Ten Ways To Increase Your Shekel Intake on CD
by Jake Jakubuwski
#DJ-JS-1-CD — $35.00
Anyone who’s ever read anything that Jake Jakubuwski has written is familiar with his style... A little bit
of humor, a little bit of “down home” wisdom and a whole lot of chutzpah. This book is just as witty, wry
and pointed as everything else he had written. There’s something in this book for the newbie, the
seasoned ‘smith and the person that’s dreaming of the day when they can go out on their own.
Jake’s advice on money making, building your business and customer relations is timeless.
This book is his foray into teaching the world of business concentrating on increasing shop
profitability through an infusion of simple but effective marketing, sales and promotional techniques
and products. Increase your profitability without a major addition of expenses or lost time, using the
techniques Jake found to be effective.
Also available in print format. See the General Locksmithing Section.
Aluminum Stile Door Service & Repair on CD by Jake Jakubuwski
#JJ-ASB-1-CD — $90.00
• In Aluminum Stile Door Service and Repair Jake endeavored to take the mystery out of aluminum stile
door service, repair, replacement and refurbishment.
• Jake outlines easy ways to replace a pivot, a lock or a concealed vertical rod. Jake shows how to
diagnose, repair, adjust or replace an overhead concealed closer or Rixson floor check.
• In this book, you can: Learn the difference between a “stile” and a “style”. Replace a surface
mounted closer or deactivate a pivot with equal ease. Adjust a malfunctioning Jackson CVR or
electrify a lock. Learn how to “take down a door” or replace a frame or add a mullion, or install a
magnetic lock.
• In 423 pages, with 758 photographs and illustrations, Jake shows you how to make some really
swinging profits by installing hinges, butts, closers, floor checks, over head concealed closers, panic
hardware, locks, latches, dust-proof strikes, new doors, frames and electronic access control.
• Photograph-after-photograph, illustration-after-illustration and chapter-after-chapter makes, I
believe, Aluminum Stile Door Service and Repair the book to have
Also available in print format. See the General Locksmithing Section..
phone: 630-837-2044
fax: 630-837-1210
97592 Eagle Way
|
Since 1929
| 5
SOFTWARE
The National Locksmith Digital Archives 1988-2014 issues
#TNLCD-SET (1988-2014) — $195.00
#TNLCD-14 (2012-2014) — $45.00
This multi-disc set, contains 27 years (1988–2014) of the Locksmith’s favorite magazine.
Over 23,000 pages of indexed and keyword searchable articles complete
with photos. Use the index to locate any topic you want to read about. You’ll get cool locksmith
internet links allowing you to visit important sites with a single click.
Removable Cores: Large Format on CD
#RCLF-CD1 — $55.00
“Removable Cores: Large Format” is packed with exploded views, photos,
line art and various graphics, which will blow you away!
Why worry about Sargent, Kaba, Schlage, CorbinRusswin, Medeco or Yale again? Get this book and
have an up-to-date resource at your fingertips.
Within its covers are a multitude of pictures, charts, drawings, exploded views, diagrams, line
art, clipart, comments, etc. that will aid the reader in understanding and in solving individual RC
problems on your job site.
Also available in print format. See the Lock Service Section.
Basic Electronic Access Control. Beginners Handbook on CD.
by Jake Jakubuwski
DJ-BE-1-CD — $45.00
In this book, Jake introduces the reader to the basics of electronic access control system, largely
concentrating on terminology and single door applications.
Many other books are full of charts and wiring calculations, etc. But Jake, in conversational tone
covers the less technical side of the project and makes it easy to read and understand
Lockin’ Up on CD by Jake Jakubuwski
#DJ-LU-1-CD — $29.00
Jake was one of America’s most beloved and respected authors and educators.
Often strongly opinionated and less than “politically correct” on occasion, Jake’s column was widely
read.
He published the articles in book form so that other security professionals and locksmiths could
use them as a template to promote their own business, as he had done
Over 100 articles in the book.
Total Door Service and Repair on CD by Jake Jakubuwski
#DJ-TDS-CD — $90.00
Doors are all around you. Shouldn’t you be getting your share of the big profits from this type of
work? Written by one of America’s most respected and beloved instructors and authors.
This book is absolutely the best reference book available today for servicing the Aluminum Stile
Door.
phone: 630-837-2044
fax: 630-837-1210
6 |
|
Since 1929
97592 Eagle Way
SOFTWARE
Interchangeable Cores: Small Format on CD
#ICSF-CD1 — $55.00
Everything you need to know about how to sell, service, install and troubleshoot interchangeable cores!
Chapters include: terminology, blanks, tools, removing cores from stubborn shells, decoding cores,
pinning, record keeping, installing, planning a system, masterkeying, billing and pricing and tips
for success.
You’ll even receive a final exam to help and test your knowledge! This volume contains over 140
pages of priceless information, designed to make I-Core work quick, easy and profitable!
Small Format Interchangeable Cores: Advanced on CD
#WL-SFIC-CD — $99.00
Features of this 309-page virtual “Encyclopedia of SFIC” have NEVER before been discussed/shared in
public.
Such items include…
• Profiles of BEST Standard and Premium keyways. Photos/diagrams of each. Locksmiths would
claw each others eyes out for these • Revolutionary!!!! These easy-to-read [graphic] pin segments
for combinating all 16,000+ possible combinations of core chambers. Gerry Finch tried it, the slide
charts attempted it, but my graphic charts are the answer! EVERY possible pin segment is present.
WOW! Check it out!
Guide to Motorcycles on CD
Volumes 1, 2, 3, 4, 5, 6 & 7
by John Blankenship
Vol. 1 #MOT-CD1 — $99.00 • Vol. 2 #MOT-CD2 — $99.00 • Vol. 3 #MOT-CD3 — $99.00 Vol. 4
#MOT-CD4 — $99.00 • Vol. 5 #MOT-CD5 — $99.00 • Vol. 6 #MOT-CD6 — $99.00
Vol. 7 #MOT-CD7 — $99.00
Any 2 Volumes #MOT-CD12 — $149.00
All 7 Volumes #MOT-CD1234567 — $419.00
For years locksmiths have begged for comprehensive service
manuals on motorcycles and they are finally here!
Covering a wide range of service procedures, you’ll know everything
a locksmith needs to know about each cycle. Plus, you’ll get step by
step photographs and instructions. If you have ever been frustrated
by cycles made by the following manufacturers, you’ll need these
comprehensive books…
• Aprilia • Baja • BMW • Buell • Cagiva • Ducati • Givi • Harley-Davidson •
Hepco & Becker • Honda • Indian • Italjet • Kawasaki • KTM • Malaguti • Moto
Guzzi • MZ • Neiman • Suzuki • Sym • Tomos • Triumph • Vespa • Victory •
Yamaha • Zadi.
All seven volumes also available in print format. See Automotive Service.
phone: 630-837-2044
fax: 630-837-1210
97592 Eagle Way
|
Since 1929
| 7
SOFTWARE / GENERAL LOCKSMITHING
The 15 Minute Safe Opening Technique on CD
#JJ-CD1 — $99.00
This book deals exclusively with round head lift out doors. Shows five ways to open a Major; three ways to
find the Dog Pin on a Major; four ways to open a Star; four ways to open a LaGard style round head.
Also covered are: Bolt shear, side punching, drilling false gates, finding Dog Pins, ‘blowing bolts’
and drilling perfect scope holes; How to make emergency dials; How to open most round heads in
fifteen minutes or less; Open the most severely vandalized heads in a matter of minutes; How to
bypass hardplate and relockers on lift-out doors; How to spindle drill older Majors; How to ‘Blow
the bolts’ on a LaGard and many LaGard style round heads.
Over 100 specific photographs. Fifty clear illustrations. Dozens of specific drill points and
a specific drill point locator, over 140 pages. Included are drill points for Diebold,
Migh-T-Safe, Kingdom, Sentry, In-A-Floor and other round heads. Page after page, picture
after picture, illustration after illustration—all designed to help you make money.
Also available in print format. See the Safe Opening Section.
Basic Masterkeying Course on CD
#BMKC-CD1 — $59.95
The Basic Masterkeying Course is designed for the Locksmith who wishes to become proficient in
Basic Masterkeying. Includes 13 step-by-step lessons, and 12 self quizzes.
NLAA Auto Service Guide on CD
#CB-05 — $99.00 • #NLAA (with Membership) — $24.95
This CD contains over 3,0000 pages of automotive locksmith service.
A multitude of articles give you complete service procedures for a wide variety of cars. Techniques
covered include code locations, lock and column disassembly, lockouts, and much more. Hundreds
of huge photos show you how to service domestic, foreign, and even high security vehicles with
ease. All known key blanks are given, as are all details you would need to work on the vehicle.
An easy index allows you to instantly locate the car you need, and one click transports you to the
correct page. Read the data onscreen, or even print it out if you choose. The NLAA Auto Service
Guide covers loads of specific vehicles with thousands of photos. For an additional $24.95, receive
a 1 year membership to the NLAA. See page 23 of this catalog for more information. Note that
NLAA members will already have received these materials. See the Automotive Service Section.
Locksmithing 101 by Don O’Shall and Tony West
#DO-L101 — $125.00
Written by two of the Locksmithing and Security Industry’s most popular Instructors and most prolific
authors, this book will take a person from Apprentice virtually to the Journeyman level of knowledge. Of
course, the person will still need to apply the knowledge and gain the time in the trade, but this is perhaps
the finest preparation for them to do so in a manner that makes them an asset, rather than a burden.
This book will take the reader step by step into the important aspects of the Locksmithing skill sets. For
the Apprentice without a Master, this book can provide the basis to make them a desirable candidate for
training positions. While nothing in life can truly be guaranteed, this book is very probably the best way into
the trade.
Master Keying Textbook Second Edition
by Don O’Shall
#DO-MKT — $60.00
This easy to read, comprehensive manual is intended to take you from beginner through intermediate in a
matter of only a few days. Based upon the popular two day course and the original Practical Master Keying
of Pin Tumbler Locks from 1981, but fully updated and using all approved terminology whenever possible.
8 |
|
Since 1929
Pure Jake - The Book! by Jake Jakubuwski
#DJ-PJ — $45.00
Jake was one of America’s most beloved and respected authors and educators. Ever wonder what paths
one might follow to get to that type of situation? In this auto-biography, Jake tells his life story and the
paths he followed in his own down home style. Easy to read and understand, this is probably one of the
most enlightening and entertaining books you may ever read.
Total Door Service and Repair
by Jake Jakubuwski
#DJ-TDS-BOOK — $90.00
Doors are all around you. Shouldn’t you be getting your share of the big profits from this type of work?
Written by one of America’s most respected and beloved instructors and authors.
This book is absolutely the best reference book available today for servicing the Aluminum Stile Door.
Also available in CD format. See the Software Section.
Advanced Master Keying Skills
by Don O’Shall, Greg Brockway and John
Truempy
#DO-AMKS — $60.00
This book is NOT for the beginner. The skills taught in this book should only be used by locksmiths who
are well grounded in basic and intermediate master keying techniques and fully comfortable with the
Standard Progression Format (SPF) charts and the development of standard master keying systems
using them. But if you are ready for the next level, THIS BOOK IS FOR YOU!
Basic Master Keying – QBE
by Don O’Shall and John Truempey
#DO-BMK — $80.00
This book uses the amazingly effective teaching tool known as QBE or Query By Example to teach Basic
Master Keying quickly and efficiently to move the beginner or apprentice to a reasonable skill level in the
least time p\ossible. If you are new to Master Keying, this is the book for you! .
Cryptology For Locksmiths
by Don OShall
#DO-CL — $60.00
Don’s cryptology skills are legendary in the locksmithing and security industry, and date back to
specialized military training in 1968. He is also known for his attention to detail and is a recognized
expert on Master Key Systems and Institutional Key Control. This book is a fast and efficient way to put
these skills to work for you, and will enable you to seriously exceed the legal requirements to provide
reasonable security for customer information, offering your customers and clients the comfort of knowing
their valuable information is not just lying around written in plain English for anyone who finds it to read
and compromise the data. This instructional and reference guide provides many easy to learn and use
techniques to encode confidential data such as safe combinations, Master Key Information, TMK Logs,
and other customer related files. Includes many techniques for key stamping and key serialization for Key
Control Management.
Institutional Lock Shop Management by Don OShall and Vernon Kelley
#DO-ILSM — $60.00
Both authors are legendary for professional management of an institutional Lock and Access Control
Shop and for attention to detail. Together they have created the fastest and easiest way to get you fully
up to speed on professional Institutional Lock Shop Management!
Master Key System - Specification, Application and
Management by Don O’Shall, John Truempy and Tony West
#DO-MKS — $60.00
You understand and can read or generate standard master key charts. You have a Master Keying client
or a Master Keyed Faciliy to manage or need to place a factory order. How do you put it all together?
This book will show you how.
|
Since 1929
| 9
GENERAL LOCKSMTHING
The National Locksmith Guide To Electronic Locksmithing
#EL-1 — $39.95
Everyone knows there’s big money in selling, installing and servicing electronic security such as mag
locks, electronic strikes, and simple access control. But how can you learn all the skills needed to make
the profits? This book starts with all the basics that every locksmith needs to know about electricity, and
teaches you every step of the way. You’ll learn everything from closed circuit TV, simple access control,
wireless security, and electronic locks.
Basic Electricity by Richard Allen Dickey
#RD-BE-1 — $29.95
If you are interested in how basic electricity will affect you in the Locksmith Industry, this book is for you.
Inside you will find… • Basic AC & DC electricity • Voltage, current, resistance & impedance • Series &
parallel circuits • Mystery of wire • How to use a multimeter • Static electricity.
If you have no idea of how electricity works, you will after reading this book. If you already have an
understanding of the basics, this book will teach you more. Electricity is in the Locksmith Industry and it is
here to stay. Don’t be afraid, be amazed with what you can do.
How To Jumpstart Your Locksmith Business or
Ten Ways To Increase Your Shekel Intake by Jake Jakubuwski
#DJ-JS-1-BOOK — $35.00
Anyone who’s ever read anything that Jake Jakubuwski has written is familiar with his style... A little bit of
humor, a little bit of “down home” wisdom and a whole lot of chutzpah. This book is just as witty, wry and
pointed as everything else he had written. There’s something in this book for the newbie, the seasoned
‘smith and the person that’s dreaming of the day when they can go out on their own. Jake’s advice on
money making, building your business and customer relations is timeless. This book is his foray into
teaching the world of business concentrating on increasing shop profitability through an infusion of simple
but effective marketing, sales and promotional techniques and products. Increase your profitability without a
major addition of expenses or lost time, using the techniques Jake found to be effective.
Basic Electronic Access Control. A Beginners Handbook.
by Jake Jakubuwski
DJ-BE-1-BOOK — $45.00
In this book, Jake introduces the reader to the basics of electronic access control system, largely
concentrating on terminology and single door applications. Many other books are full of charts and wiring
calculations, etc. But Jake, in conversational tone covers the less technical side of the project and makes
it easy to read and understand
Lockin’ Up by Jake Jakubuwski
#DJ-LU-1-BOOK — $29.00
Jake was one of America’s most beloved and respected authors and educators.
Often strongly opinionated and less than “politically correct” on occasion, Jake’s column was widely read.
He published the articles in book form so that other security professionals and locksmiths could use them
as a template to promote their own business, as he had done
Over 100 articles in the book.
How to Shake the Shekel Tree! by Jake Jakubuwski
#DJ-SST — $29.00
In this book Jake concentrates on simple but effective sales techniques and products to increase your
shop’s profitability.
This book concentrates on sales without the need to become a sales type individual.
10 |
|
Since 1929
Certification Program
Welcome to The National Locksmith Certification program. This testing certification program consists of multiple specific test
topics that you can choose at random. Each test contains 50 multiple choice questions of which 40 correct answers are needed for a
passing score. Each completed and passed test is designated with a certificate of completion. For every five tests completed and passed,
a framable certificate with accomplished letter designation is received.
For example:
TNL-CL – Certified Locksmith designation after a total of 5 tests are passed.
TNL-CLA – Certified Locksmith Advanced designation after a total of 10 tests are passed.
TNL-CLM – Certified Locksmith Master designation after a total of 15 tests are passed.
TNL-CLM II – Certified Locksmith Master II designation after a total of 20 tests are passed.
Tests are available online electronically - An email will be sent to you within 72 hours with a link to take the test.
Cost per test is $35.00 for Subscribers to TNL and their Bonded Employees. Non subscriber pricing per test is $75.00.
Japanese Motorcycles Certification Test
Item: CP-JB-JM-1 Price: $35.00
Some of the reference materials that can be used for this test are: The National Locksmith Guide to Motorcycles Vol. 1 to 7, available
from The National Locksmith.
Non-Japanese Motorcycles Certification Test
Item: CP-JB-NJM-1 Price: $35.00
Scooter & ATV Certification Test
Item: CP-JB-SAT-1 Price: $35.00
All 3 Motorcycle and ATV Certification Tests
Item: CP-JB-M3 Price: $100.00
All 3 Motorcycle and ATV Certification Tests AND all 7 Motorcycle CD’s
SAVE over $68
Item: CP-JB-M3-vcd Price: $456.00
All 3 Motorcycle and ATV Certification Tests AND all 7 Motorcycle Books
SAVE over $68
Item: CP-JB-M3-vbook Price: $456.00
High Security Locks - Basic Certification Test
Item: CP-MM-HSL-1 Price: $35.00
The terminology and lock orientation in this test is consistent with the North American lock market.
High Security Locks - Advanced Certification Test
Item: CP-MM-HSL-2 Price: $35.00
High Security Locks - Basic & Advanced Certification Test
Item: CP-MM-HSL-B Price: $70.00
Interchangeable Core Certification Test
Item: CP-SD-IC-1 Price: $35.00
A reference book that can be used for this test is: Interchangeable Cores: Small Format, available from The National Locksmith.
Large Format Interchangeable Core - Basic Certification Test
Item: CP-WL-LF1 Price: $35.00
Questions on this Test are derived from the book: Removable Cores: Large Format, available from The National Locksmith.
Large Format Interchangeable Core - Intermediate Certification Test
Large Format Interchangeable Core - Advanced Certification Test
All 3 Large Format Interchangeable Core Certification Tests - Basic, Intermediate, Advanced
Item: CP-WL-LFA Price: $100.00
|
Since 1929
| 11
GENERAL LOCKSMITING
All 3 Large Format Interchangeable Core Certification Tests - Basic, Intermediate, Advanced
AND Removable Cores: Large Format book
Save 15% on the Book
Item: CP-WL-LFAb Price: $146.75
Small Format Interchangeable Cores - Basic Certification Test
Item: CP-WL-SF1 Price: $35.00
All questions on this Basic Test are derived from the book: Interchangeable Cores: Small Format, available from The National Locksmith.
Small Format Interchangeable Cores Certification Test - Intermediate
All questions are derived from the book: Interchangeable Cores: Small Format & SFIC: Advanced, available from The National Locksmith.
Small Format Interchangeable Cores Certification Test - Advanced
Questions on this test are derived from the book: SFIC: Advanced, available from The National Locksmith.
All 3 Small Format Interchangeable Cores Certification Tests - Basic, Intermediate, Advanced
Item: CP-WL-SFa Price: $100.00
Questions on this test are derived from the book: Interchangeable Cores: Small Format & SFIC: Advanced, available from
The National Locksmith.
All 3 Small Format Interchangeable Cores Certification Tests - Basic, Intermediate,
Advanced AND Both Books Interchangeable Cores: Small Format & SFIC: Advanced Books
Save 15% on the books
Item: CP-WL-SFab Price: $230.90
Questions on this test are derived from the book: Interchangeable Cores: Small Format & SFIC: Advanced, available from
Master Keying - Basic Certification Test
Item: CP-WL-MK1 Price: $35.00
A reference that can be used for this test is: Basic Master Keying Course on CD by The National Locksmith.
Master Keying - Intermediate Certification Test
Item: CP-WL-MK2 Price: $35.00
A reference that can be used for this test is: Basic Master Keying Course on CD by The National Locksmith.
Lock Bypass Techniques - Basic Certification Test
Item: CP-MM-LBT-1 Price: $35.00
One of the reference books that can be used for this test is: The National Locksmith Guide to: Picking and Impressioning.
Lock Bypass Techniques - Advanced Certification Test
Item: CP-MM-LBT-2 Price: $35.00
Lock Bypass Techniques - Basic & Advanced Certification Tests
Item: CP-MM-LBT-b Price: $70.00
Lock Bypass Techniques - Basic & Advanced Certification Tests AND
The Guide to Picking and Impressioning book
Save 15% on The Guide to Picking and Impressioning
Item: CP-MM-LBT-bb Price: $107.00
Basic Analog and Digital Electronics Certification Test
Item: CP-MM-ADE-1 Price: $35.00
One of the reference books that can be used for this test is: The National Locksmiths Guide to Electronic Locksmithing,”available from
Safe Deposit Box Lock Servicing Certification Test
Item: CP-MM-SDBS-1 Price: $35.00
A reference that can be used for this test is: The National Locksmith Guide to Safe Deposit Box Service.
Safe Deposit Box Lock Servicing Certification Test AND
The National Locksmith Guide to Safe Deposit Box Service Book
Save 15% on The Guide to Safe Deposit Box Service book.
Item: CP-MM-SDBS-1b Price: $64.75
12 |
|
Since 1929
The Ultimate Technitips Collection
#TIPS-2 — $39.95
Here’s one of the most useful books ever available to the locksmith!
Three hundred pages filled with tips and tricks from veteran locksmiths. You’ll learn all the secrets other
locksmiths use to save time and make extra money on the job. You’re GUARANTEED to make back the
cost of this book in no time flat.
Categories of tips include: Car Opening, Domestic and Foreign Auto Service, General Automotive,
Making & Modifying Locksmith Tools, Padlock Tips, Mortise Lock Tips, Lockout Tips, Door Control,
Safe Procedures, Picking & Impressioning, Modifying Key Machines and much, much more.
The Ultimate Technitips Collection is worth its weight in gold! In this one volume, you’ll have the tricks and
secret methods developed over many years by HUNDREDS of locksmiths. Order your copy today.
Service With A Smile by Sara Probasco
#SWS — $14.95
To tickle the funnybone of anyone in a service oriented business.
Service With A Smile accounts the humorous escapades of Don and Sara Probasco. You’ve been
entertained by Sara’s column in the past, now you can have an entire collection of her finest tales.
Antique Padlocks by Jack Roberts
#PAD-1 — $29.95
Finally there is a book to give you all the information you need about old interesting locks.
Our manual shows you a photo of the lock and gives you data on the manufacturer, age, construction
materials, and even the value of the padlock! Plus, we tell you how to make an operating key, as well
as information on which blanks to use, etc. A “Notes” section gives a history of the lock as well as any
technical information needed to help you make a working key. Hundreds of types of locks are covered
including iron, steel and brass padlocks.
Flat Rate Manual by Janice Pate
#FRM-1 — $34.95
Now you can easily “Price for Profit!”
Chapters allow you to price jobs in all these categories: Domestic and foreign autos, code keys,
conversions, duplicate keys, first key or rekey, installations, key-in-knob locksets, lockouts, masterkey
systems, miscellaneous, safe and vault work and trip charges.
Aluminum Stile Door Service & Repair by Jake Jakubuwski
#JJ-ASB-1-BOOK — $90.00
• In Aluminum Stile Door Service and Repair Jake endeavored to take the mystery out of aluminum stile
door service, repair, replacement and refurbishment.
• Jake outlines easy ways to replace a pivot, a lock or a concealed vertical rod. Jake shows how to
diagnose, repair, adjust or replace an overhead concealed closer or Rixson floor check.
• In this book, you can: Learn the difference between a “stile” and a “style”. Replace a surface mounted
closer or deactivate a pivot with equal ease. Adjust a malfunctioning Jackson CVR or electrify a lock. Learn
how to “take down a door” or replace a frame or add a mullion, or install a magnetic lock.
• In 423 pages, with 758 photographs and illustrations, Jake shows you how to make some really swinging
profits by installing hinges, butts, closers, floor checks, over head concealed closers, panic hardware, locks,
latches, dust-proof strikes, new doors, frames and electronic access control.
• Photograph-after-photograph, illustration-after-illustration and chapter-after-chapter makes, I believe, Aluminum Stile
Door Service and Repair the book to have.
|
Since 1929
| 13
GENERAL / AUTOMOTIVE LOCKSMITHING
15 Minute Simplex Install & Other Neat Stuff on CD
by Jake Jakubuwski
#JAKE15SIMPLEX — $69.00 (only available on CD)
The 15 Minute Simplex Install and Other Neat Stuff shows you how to quickly put a Kaba/Ilco
installation behind you. Jake draws on his own experience from the time he first saw his first
Simplex 1000 to his installation of Kaba/Ilco’s 3100! Like his other books and articles, this one
is loaded with photographs, illustrations, tips, tricks and short-cuts to help the beginner and the
seasoned ‘smith save time, make money and have a little fun doing it! If you’ve ever mumbled in
frustration while working on one of these locks — this is the book you won’t want to miss.
Wafer Lock Reading by Robert Sieveking
#WLR-1 — $19.95
• Easy to learn. • No Codes needed.
• Faster and safer than impressioning. • Easy to learn principles will have you reading locks fast. • Make
keys for foreign auto without codes, disassembly or impression. • Reading wafer locks is one of the special
skills every locksmith should master.
Revised GM Steering Column Course
by Thomas A. Mazzone & Tom Seroogy
#GM-2 — $115.00
Here’s what the course contains… • Comes complete with take-home test so you can become certified on
GM steering column service! • Authoritative training on every domestic GM column from 1967 to 1995.
• Includes the collapsing GM steering shaft, avoid the $165 GM 10-cut mistake, A to Z airbags, square
columns made easy, Alpha Tech Service without fear, the truth about VATS variable timing and more. •
Written and photographed by GM Master Technician, Tom Mazzone, and 10 year Auto Locksmith Expert,
Tom Seroogy. • In-depth information drawn from actual field experience. • Large clear photos highlight
commonly found problem areas and take you step by step for clear, easy and concise service procedures.
• Dangers & Warning section alerts you to costly and time consuming problems before you start. • A tool
guide shows exactly what tools are necessary for servicing each column. • Written using the same strict
GM service guidelines used for training GM technicians.
Sieveking Auto Key Guide & Illustrated Cross Reference by Robert Sieveking
#AK-1 — $27.00
The Sieveking Auto Key Guide lists over 2,600 automotive and motorcycle keyways, covering makes
from Acura to Zundapp, and listing fourteen popular key manufacturer numbers.
Every listing has a clear illustration of the keyway. This allows the locksmith to compare the “key-inhand” to the listed number. If the key blank number is not known, the “Maker” section of The Sieveking
Auto Key Guide will allow the locksmith to search through all the listed keyways for a particular auto
maker “by the illustration of the keyway”. When the correct keyway is found, you will also find all the
manufacturers numbers for that keyway. The keyways are also identified as pin or wafer, and the number
of pins or wafers given. Whether the illustrated key is 6 wafer or 8 wafer, 5 pin or 10 wafer, you’ll know
at a glance.
Fast Facts by Robert Sieveking
#RS-FF-11 — $99.00
Written by a Locksmith for Locksmiths. Model index contain vehicles from 1965-2011.
New to the business or over 30 years experience, you cannot afford to be without Fast Facts™. No
batteries required. Faster, Simpler and Easier to use than any other computer program. Fast Facts™ is a
“must have” item for motorcycle work. Whether you are simply duplicating keys or making first keys for
auto or motorcycles, the Fast Facts™ encyclopedia index of auto and motorcyle keys will make your job
faster and easier by eliminating wasted keys cut on the wrong blank.
There are 179 motorcycle key plates, 526 auto key plates and many new transponder Facts. The model
index lists over 3300 autos and 1400 motorcycles. The exclusive lay-flat plastic spiral bound desk size
adds to the ultimate convenience.
14 |
|
Since 1929
AUTOMOTIVE LOCKSMITHING
GM Sidebar Lock Decoder System by Tom Thill
#TT-1 — $99.95
Author Tom Thill, has invented an amazing new way to make keys for six cut GM Sidebar Locks.
The book describes a method which allows you to use a set of specially cut keys in the ignition. By turning
the keys in the lock, one will become trapped. The key will only be removed when you release the turning
pressure. Then you use a second set of keys until the second key traps.
Each key is specially coded. In just a few minutes you will have identified the two keys which trapped in
the lock. Simply look on the provided chart until you find the section that lists the two specific keys which
trapped for you. Right there on the chart, you will be given several codes. One of those codes is the correct
one for the key. In many instances you will be given only one code, which will be the exact one for the lock. His system will
save a great deal of time and trouble in those instances. The average time it takes to decode the lock with his system is
about 10 minutes, and sometimes faster.
The book includes full details of all the methods, and all the charts needed to insure that you may never have to tear down
a GM column again with complete instructions and specifications which enable you to cut 130 of your own keyblanks
using the precise specifications needed. Do not confuse this decoder method with tryout keys. You are not creating
tryout keys. You are creating carefully specified keys which exploit the sidebar lock to decode it by trapping a wafer. Then,
knowing which two keys become trapped using the system, we give you the correct code for the lock.
Guide to Motorcycles Volumes 1, 2, 3, 4, 5, 6 & 7 by John Blankenship
Vol. 1 #MOT-1 — $99.00 • Vol. 2 #MOT-2 — $99.00 • Vol. 3 #MOT-3 — $99.00
Vol. 4 #MOT-4 — $99.00 • Vol. 5 #MOT-5 — $99.00 • Vol. 6 #MOT-6 — $99.00
Vol. 7 #MOT-7 — $99.00
Any 2 Volumes #MOT-12 — $149.00
Any 3 Volumes #MOT-123 — $199.00
Any 4 Volumes #MOT-1234 — $249.00
Any 5 Volumes #MOT-12345 — $299.00
Any 6 Volumes #MOT-123456 — $359.00
All 7 Volumes #MOT-1234567 — $419.00
For years locksmiths have begged for comprehensive service manuals on
motorcycles and they are finally here!
Covering a wide range of service procedures, you’ll know everything a
locksmith needs to know about each cycle. Plus, you’ll get step by step
photographs and instructions. If you have ever been frustrated by cycles made
by the following manufacturers, you’ll need these comprehensive books…
• Aprilia • Baja • BMW • Buell • Cagiva • Ducati • Givi • Harley-Davidson •
Hepco & Becker • Honda• Indian • Italjet • Kawasaki • KTM • Malaguti • Moto
Guzzi • MZ • Neiman • Suzuki • Sym • Tomos • Triumph • Vespa • Victory •
Yamaha • Zadi. All seven volumes also available on CD. See Software
section.
Auto Lock Service
#ALS-1 — $14.95
Covers opening and service techniques.
• Covers over 15 different locks and manufacturers. • Learn how to make keys.
Chapters cover service and repair on the following: Audi, BMW, Corsica, Corvette, Daihatsu, Datsun, Ford
Probe, Ford Festiva, Honda CRX, Honda Acura, Hyundai, Mercedes, Mitsubishi Precis, Pontiac Fiero,
Suzuki Samurai, Toyota and Volvo. A great value.
Motorcycle Lock Service by Shirl Schamp
#MLS-1 — $14.95
This book contains full details on everything the locksmith needs to know about motorcycle locks. It is
recommended study material for those who want to test their knowledge.
|
Since 1929
| 15
LOCK SERVICE
Advanced Wafer Lock Reading by Robert Sieveking
#RS-WLR-2 — $39.95
• Reading Wafer Locks is not a new concept or difficult skill to acquire. It is one of the basic locksmith
skills that will find daily use in any shop.
• It is a preferred key making method for T-Handle, L-Handle, cam and desk lock cylinders. Foreign and
Domestic automotive cylinders and motorcycle cylinders offer little more challenge than desk cylinders, if
you know the secrets.
• Wafer Locks are a pleasure when you know how to read them. This book offers the most complete
reference on wafer lock reading to be found anywhere. Lock construction, Simple tools and The Proven
Method are completely explained.
• Written for locksmiths, by a working locksmith. • Over 200 crystal clear photos and illustrations amplify the text, to make
you the expert. • Over 235 pages of examples and specific locksmith instruction lead you to complete mastery of the wafer
lock cylinder. • Covers many common desk and cabinet locks, Ford 10-wafer, Ford 8-wafer, GM 10-wafer (75 GRV), GM
10-wafer (93 GRV), Chrysler 7-wafer (Y154), Chrysler 7-wafer (Y157), Chrysler 8-wafer (Y-159) and motorcycles. • It is a
self-study course and a reference manual. • Advanced Wafer Lock Reading is the book every locksmith needs.
Advanced Wafer Lock Reading saves time and effort, and increases your “earning potential.”
Tubular Lock Service by Robert Sieveking
#RS-TL-1 — $39.95
Tubular Lock Service is indispensible!
This book contains complete step by step service and disassembly methods on nearly all current tubular
locks along with key making tips, picking tools, methods and bypass procedures. This book will make you
the expert. Written by an experienced locksmith, it will give you the background and experience based tips
necessary to begin any tubular lock job with confidence and finish it with satisfaction.
Hundreds of Photos and Illustrations show the lock cylinder configurations, tables of information and
decoding methods not found in any other resource. The book covers many types of Tubular Lock Picks
and bypass tools, along with actual photos and instruction on the proper use of the tools. Secret locksmith
techniquesp are covered in complete detail for determining the unknown combinations for ACE ChangeMatic and Fort Gem- Matic cylinder.
What makes the ACE II cylinder harder to pick than other cylinders? What unique principles were used to make the Fort
APEX cylinders so pick resistant?
All of these secrets and more will be revealed in The National Locksmith Guide to: TUBULAR LOCK SERVICE Tubular
Lock Service. It is a must have reference
Door Lock Encyclopedia by Robert Sieveking
#DLE — $39.95
The ability to remove a lock from a door, disassemble the mechanism, and remove the lock cylinder for
service is not always a simple straightforward task.
The Door Lock Encyclopedia is a clear and concise illustrated service manual illustrating service
instructions for standard cylindrical locksets including American Eagle, Arrow, Corbin, Dexter, Harlock,
Kwikset, Lori, Master, National Lock/Amerock, Sargent, Schlage, Weiser and Yale. It will equip you with
specific knowledge and a few tricks to make servicing understandable, easy to master and profitable.
Interchangeable Core Cylinder Service by Robert Sieveking
#RS-ICCS-1 — $49.00
This book covers Best™ SFIC, Corbin™ Master Ring, Corbin Russwin™ LFIC, Sargent™ LFIC and Schlage
LFIC interchangeable cylinder service. The book covers Cylinder Construction and Design, Master Key
System Development and Specific Service Techniques.
It was written as a Home Study Course for the working locksmith. Lesson Objectives at the beginning of
each Chapter and Study Questions at the end of each Chapter lead the reader on
a structured learning adventure into the world of Interchangeable Core Service.
This book has a “Scan & Print” section, which allows the reader to reproduce all of the special Keying and
Un-combinating forms found in the text. 5-1/2” x 8-1/2”, Spiral Bound, 284 pages, 241 illustrations,
B&W text, color Scan & Print section
16 |
|
Since 1929
LOCK SERVICE
Lock Repair Manual
#LRM-1 — $14.95
Chapters cover installation and repair for the following manufacturers: Abloy, Adams Rite, ASSA, Best,
Chicago, Corbin, mortise locks, Sargent, Schlage, Simplex, Weiser, Yale, Unilock, electric gate locks, and
cabinet locks. This book contains material reprinted from The National Locksmith. Here, under one cover
you have a tremendous amount of lock servicing information. Next time you run into a problem chances
are you’ll find the answer in the Lock Repair Manual.
Picking & Impressioning by Robert Sieveking
#PI — $45.00
Here is the most complete book ever published on picking and impressioning locks!
You will have everything you need to know about how to open almost every kind of lock that can be
picked. In fact, our special illustrations make picking easy! Plus you will also learn all there is to know
about impressioning keys. Fantastic photos teach you how to read marks and how to make a first key in
just minutes, Hundreds of pages and illustrations make picking and impressioning EASY! The old timer will
love this book for all the new tips he’ll find. The beginner will soon find that he is picking and impressioning
like he’s been in the business for years!
Removable Cores: Large Format by William M. Lynk
#RCLF-1 — $55.00
“Removable Cores: Large Format” is packed with exploded views, photos, line art and various graphics,
which will blow you away! Why worry about Sargent, Kaba, Schlage, CorbinRusswin, Medeco or Yale
again? Get this book and have an up-to-date resource at your fingertips. Within its covers are a multitude
of pictures, charts, drawings, exploded views, diagrams, line art, clipart, comments, etc. that will aid the
reader in understanding and in solving individual RC problems on your job site. Also available on CD. See
the Software Section.
Interchangeable Cores: Small Format by William M. Lynk
#ICSF-1 — $55.00
Everything you need to know about how to sell, service, install and troubleshoot interchangeable cores!
Chapters include: terminology, blanks, tools, removing cores from stubborn shells, decoding cores, pinning,
record keeping, installing, planning a system, masterkeying, billing and pricing and tips for success.
You’ll even receive a final exam to help and test your knowledge! This volume contains over 140 pages of
priceless information, designed to make I-Core work quick, easy and profitable! Also available on CD. See
the Software Section.
Small Format Interchangeable Cores: Advanced by William M. Lynk
#WL-SFIC — $99.00
Features of this 309-page virtual “Encyclopedia of SFIC” have NEVER before been discussed/shared
in public. Such items include… • Profiles of BEST Standard and Premium keyways. Photos/diagrams
of each. Locksmiths would claw each others eyes out for these • Revolutionary!!!! These easy-to-read
[graphic] pin segments for combinating all 16,000+ possible combinations of core chambers. Gerry Finch
tried it, the slide charts attempted it, but my graphic charts are the answer! EVERY possible pin segment is
present. WOW! Check it out! Also available on CD. See the software section.
Don OShall’s 2012 Guide to Interchangeable Core Servicing
#DO-12IC-1 — $60.00
A comprehensive guide to the servicing and pinning of Interchangeable core products from a wide variety of
lock manufacturers, including both SFIC and LFIC offerings. Heavily illustrated throughout to make learning
easy, this book also serves as an excellent reference manual for experienced Journeyman or Master
Locksmiths. Don OShall has been a recognized expert on Interchangeable Cores and Master Keying
for over thirty years. This book puts his knowledge at your fingertips, including the current crop of patent
protected products
|
Since 1929
| 17
SAFE OPENING
Pen Parties on DVD by Dave McOmie
#DM-PEN-DVD — $150.00
The Pen Parties is Dave’s 110 minute DVD.
It shows you live action of safe opening and trouble shooting at its finest in cities all over America. Years
in the making, Dave travels to Chicago, Phoenix, Seattle and Toledo opening dozens of locked and
damaged safes. See what is inside and outside of these containers. Our tiny cameras even take
you right down the hole into the wheel pack! Sections on trouble shooting, dial pulling, hardplate
drilling, defeat methods and tools round out this amazing film. The production is top notch.
This is not your amateur safe video. Plus see the Blooper Reel. It’s a scream when Safe Techs Go
Wild!
Here’s a note from Dave on the concept of the movie…
We focus on techniques which are universally applicable. For example, there is a section on Seven Defeat Methods, which
cover virtually all safes using mechanical locks. In truth, in any given year, I use maybe five of the seven on all the safes that
I open. That is the beauty of taking a conceptual approach to safecracking. The trick is choosing the right method for the
right safe.
The 15 Minute Safe Opening Technique
by Jake Jakubuwski
#JJ-1 — $99.00
This book deals exclusively with round head lift out doors. Shows five ways to open a Major; three ways to
find the Dog Pin on a Major; four ways to open a Star; four ways to open a LaGard style round head.
Also covered are: Bolt shear, side punching, drilling false gates, finding Dog Pins, ‘blowing bolts’ and
drilling perfect scope holes; How to make emergency dials; How to open most round heads in fifteen
minutes or less; Open the most severely vandalized heads in a matter of minutes; How to bypass hardplate
and relockers on lift-out doors; How to spindle drill older Majors; How to ‘Blow the bolts’ on a LaGard and
many LaGard style round heads.
Over 100 specific photographs. Fifty clear illustrations. Dozens of specific drill points and a specific drill
point locator, over 140 pages. Included are drill points for Diebold, Migh-T-Safe, Kingdom, Sentry, In-A-Floor and other
round heads. Page after page, picture after picture, illustration after illustration—all designed to help you make money. Also
available on CD. See the Software Section.
Bread & Butter by Dave McOmie
#BB-01 — $85.00
Now here is one amazing value!
This book runs well over 300 pages and is bursting with photographs, drill points, relocker drill point and
opening details for dozens of the most popular safes in the industry. Not only do you get all the opening
specs and measurements, you also get a very complete rundown on opening procedures. This book
actually walks you through every opening from the first step until the door swings open!
Included among many other safes are: Hamilton Square Door, Knight TL-15, Electronic Safe Locks, Pacific
Security Products, Diebold, Mosler, LaGard, GSA, Side and Bottom Drilling, York, Kumihara, Sentry, and
more. You’ll find this very hefty book to be an indispensible aid when you have a safe to open. While this
thick, monster book may be heavy to carry, it won’t break your bank at only $85!
More Bread & Butter by Dave McOmie
#BB-02 — $85.00
Another great value!
This books runs over 200 pages.
If you own Bread and Butter, you have to have More Bread and Butter. Still more photographs drill points,
relocker drill point and opening details for dozens of the most popular safes in the industry. Not only do
you get all the opening specs and measurements, you also get a very complete rundown on opening
procedures. This book actually walks you through every opening from the first step until the door swings
open!
Included in this edition are: Sentry, Gardall, Diebold ATM, Art Metal fire Safes, Wico, Diebold’s CashGard,
LaGard Locks, Bischoff, Mosler, HH, Gary, Kumahira, Securall, Schwab, Meilink, Fire Fyter, Star and a
whole bunch more information. Make you collecton complete.
18 |
|
Since 1929
SAFE OPENING
Safe Opening Volumes 1, 2, 5 by Dave McOmie
Package deals available on purchasing more than one volume!
any single Volume
$110.00 each
any two Volumes
$90.00 each
any three Volumes
$80.00 each
These are the classic safe books you will need to open most any safe easily and professionally. Each book
contains detailed opening instructions for 200 very common safes, including 400 safe photos in each
volume. You get exact drill points, drop-in points, relocker points, and more. Each safe is shown from the
front for identification purposes. Then the safe is shown open with the back panel removed. You get a
perfect view of the exposed boltworks, relockers and wheel pack. All measurements needed to open
the safe are provided. Plus a service notes section tells you special tricks…like when to look out for
hardplate! Virtually all brands are covered!
Volume 1. #SO-1 (Modern Safes) A & B Safe, Adesco, Amsec, Armor, Diebold, Eagle, Gary, Hall,
Hermann, Herring Hall Marvin, Horizon, In-A-Floor, Johnson, Pacific, Knight, MacNeale & Urban, Major,
Meilink, Mosler, Remington Rand, Schwab, Sentry, Victor, York.
Volume 2. #SO-2 (Modern Safes) A & B Safe, Adesco, All-Steel, Amsec, Aanon, Armadillo,
Armor, Brown, Centurion, Deluxe, Diebold, Diplomat, Gardall, Gardex, Gary, Guardian, Guardsman,
Hermann, Herring Hall Marvin, Horizon, H.P., In-A-Floor, Intersec, Johnson-Pacific, Major, McGunn, Meilink,
Migh-T-Safe, Mosler, Murphy, Mutual, Pacific, Pacific Security Products, Safeguard, Schwab, Sentinel,
Shaw-Walker, Stewart, U.S. Security, York.
Volume 5. #SO-5 (Later Model Safes) Aanon, Adesco, Amsec, Armor, Brown, Hamilton, In-A-Floor,
Keepsafe, Kingdom, Lord, LSDA, McGunn, Meilink, National, National Security, New England, NKL, Pacific
Security Products, Sanlic, Schwab, Sears, Sentry, USCAN, U.S.
Penetration Party by Dave McOmie
#PP-1 — $110.00
Uncensored! • The Safes! • The Tools! • The Action! • The Perfect Openings!
• The Bloopers and Blunders! • The Slick Tricks!
No one knows safes and safecracking like Dave McOmie. When it comes to drill points, he is the master
of all masters. This book takes you inside Dave’s mind, and allows you to follow his thought process as
he analyzes each opening. Dave gives you his thoughts on the best opening method, then the opening is
performed. And then Dave honestly appraises each method and offers improvements where he feels his
original methods were less than perfect.
Modern Safe Opening by Robert G. Sieveking
#MSO-1 — $59.95
This book is a step-by-step how-to course in safe penetration. Opening safes is one of the most profitable
aspects of the locksmithing business. Now, with Modern Safe Opening you’ll learn: the theory of operation
through troubleshooting and combination changing to logical penetration site selection and methods.
Nearly all possible drill points are defined and illustrated by original photos and accurate drawings. Drill
and transfer, drill for the drop, drill for the fence, drill for a relock trigger, or drill to solve a specific lock
malfunction. Each method is defined, and you get step-by-step procedures. Back, side, top or face drill,
under the dial or outside the dial. You’ll learn it all!
Dave McOmie on Vault Doors Vol. 1 — Bank Vaults
#BV-1 — $110.00
Dave McOmie has done it again! Here is the definitive new book on Bank Vault opening made easy!
These openings can be a nightmare, but not when you bring Dave McOmie along with you on the job.
You get amazing photos and opening details as usual.
Dave McOmie on Vault Doors Vol. 2 — Fire & Plate Vaults
#FPV-1 — $110.00
Featuring Dave McOmie’s extraordinary level of detail, opening techniques, and clear photographs, this
new volume makes Fire & Plate Vaults easy to open. Your investment in this book will pay for itself many
times over in saved headaches and time.
|
Since 1929
| 19
SAFE OPENING
Gun Safes by Dave McOmie
#GS-1 — $110.00
Need a drill point or relocker drill point on a gun safe?
Then this is THE book for you, with superb photos and precise information on gun safes made by Amsec,
Blue Star, Browning, Cannon, Centurion, Cobalt, Fort Knox, Frontier, Gardall, Gold Coast, Goldfield, Granite,
Hall’s, Kodiak, Liberty, Treadlok, ValueLok, Winchester and Zanotti. PLUS, Dave has included an invaluable
section on how to defeat the most popular locks currently on the market, both mechanical and electronic.
Mechanical locks include: Ilco P67; LaGard 3330; S&G 6730. Electronic locks include: Amsec KPL-100,
KPL-2000, ESL-10; LaGard Swingbolt, Old-Style 33E, New-Style33E, S&G 6120. This is the first book in
a brand new series, in which each volume will be dedicated to a particular type of safe.
10 Years of Dave McOmie
#DM-10 — $199.95
Every single National Locksmith article by Dave McOmie from August 1986 through August 1996 under one cover!
• This book has a magnificent and durable casebound hard cover! • Over 500 high-gloss pages—our
biggest safe book ever! • Each page is numbered and labeled by month and year for easy reference. •
Dave has written an extensive Index, which categorizes each safe by manufacturer and type, and lists the
corresponding page numbers and month/year. This is an indispensable aid to the technician who needs to
locate information NOW! • Where appropriate he has written Retrospective Comments at the end of the
articles. These are sometimes information-loaded, sometimes humorous, but always worthwhile.
10 More Years of Dave McOmie
#DM-20 — $199.95
In this second installment — Every single National Locksmith article by Dave McOmie from September
1996 through September 2006.
This book contains 327 pages. The index categorizes each safe by manufacturer and type, and lists the
corresponding month / year. This book contains extensive information on a wide variety of safe opening
techniques and styles. A must have for any Safe Tech.
Drilling Safes by Carl Cloud
#DS-1 — $95.00
Carl Cloud has written a very important book on safe opening.
One of the most critical parts of opening a safe is knowing where to drill the holes. But what’s the best
way to drill a safe? How do you drill hardplate? What am I looking at through the hole? What tools do I
need? What do all these safe terms really mean? Exactly how do I defeat a relocker? This book answers
all those questions and many more!
The Best of Dale Libby
#DALE — $25.00
This book includes the best articles written by Dale Libby over the course of many years, going back well
over ten years! Now you can have this terrific collection of safe opening articles, automotive articles, and
more.
These are the articles that started the safe opening revolution. Now you can have them all complete, under
one cover! Order your copy today! • Sentry Hardplate Info! • 135 pages, tons of photos! • Contains over 50
chapters! • Learn from the master! • Covers safe troubleshooting.
20 |
|
Since 1929
SAFE OPENING
Safe Deposit Box Service by Robert G. Sieveking
#SDBS-1 — $39.95
There is gold in safe deposit boxes!
Not just money stored inside them, but gold to be earned by opening and servicing these containers. But
what should I look for? Where do I drill for the fence or gates? Can I refinish this door easily? Can I open
this door without damaging the lock? Where can I find space and depth dimensions? I have a key, but why
can’t I retract the bolt? How do you make a drill pattern for these locks? I pulled the nose, now what do I
do? There are a lot of questions, and Safe Deposit Box Service gives you all the answers! You’ll learn the
complete theory of the principles and operation of the lever lock, as well as the tools necessary to defeat
them. You’ll be able to open these locks with minimum damage to the lock and container. Original photos and accurate
drawings on nearly every page lead you to quick and easy success when faced with lock boxes, safe deposit boxes and
inner safe doors.
Ask Dave by Dave McOmie
#AD-1 — $75.00
You asked. He answered. This is safe and vault Q&A with an attitude.
The material has breadth and depth, covering vault doors, round doors, square doors, fire safes, antique
safes, Grasshopper safes, Salamander safes, electronic safes, dial removal techniques, drilling methods,
scopes, tools and just about anything else you ever wanted to know…but were afraid to ask. A great
addition to any safe library, Ask Dave is destined to be a cult classic. Order yours today!
High Security Safes Volume 1 by Dave McOmie
#HSS — $175.00
Includes safes by the following… • Bernardini • Bischoff • Chatwood-Milner • Chubb • Fichet-Bauche •
ISM • Kaso • Lord • Original • SLS • Opening jobs often start at $1,000.00! • Over 225 pages of complete
openings! • Each safe described with many photos! • Contains many FULL PAGE photos! • Very detailed
opening procedures! • These are the world’s toughest safes! Learn to open High Security Safes now!
High Security Safes Volume 2 by Dave McOmie
#HSS-2 — $175.00
Dave McOmie’s famous book, The National Locksmith Guide to High Security Safes, Volume 2 is here!
Totalling 250 pages, it is packed with great information and photos of high security safes by Ambassador,
Atlas, Bernardini, Bischoff, Bridgeman, Bumil, Diebold, Emo, Hadaikan, International, Kumahira, Mancini,
Mosler, Original, Rosengrens, Securifort, and Vector. Included are many opening tips designed to make
your life easier.
Dave McOmie on Safe Locks
#DMSL-1 — $110.00
Dave McOmie on Safe Locks is one of the most important books ever published on safes!
Almost 300 pages of information, photographs and illustrations give you every scrap of information about
a huge variety of safe locks. You’ll have lock specifications, x-ray drawings, tons of Dave’s famous photos
and measurements, and his opening recommendations on a vast number of common, high security,
modern, antique and electronic safe locks.
Included are locks made by: Alpine, Baum, Bernardini, Center, Chubb, Detroit, Diebold, Eagle, Federal,
Fortronics, Giant, Halls, HHM, Ilco, Jackson, Kromer, LaGard, Lowe & Fletcher, Mas-Hamilton, Mauer,
Meilink, Mosler, Pittsburg, Reliable, Remington-Rand, Rosengrens, S&G, SLS, SMP, Steel Safe, Stuv, Sun,
Tann, Triumph, Victor and Yale. Comprised of information from the massive McOmie Files, this book covers safe locks in
stunning detail to make identification and opening faster than ever.
Dave McOmie on Lift-Out Round Doors
#LRD-1 — $125.00
This book contains 317 pages (not counting the lengthy introduction), 664 photographs, and more than
40,000 words of text. It covers just about every lift-out round door you will ever see, and a whole lot more
(54 different manufacturers, to be precise). Included in the text are drill points, relocker drill points, depth
to door bolts, door thickness, door diameter, and many, many tips and tricks.
|
Since 1929
| 21
SAFE OPENING
Dave McOmie on Hinged Round Doors Vol. 1
#HRD-1 — $125.00
A massive Dave McOmie safe book is ready for delivery to you! Dave McOmie On Hinged Round Doors
is over three hundred pages of action packed photos, opening tips, instructions, drill points and more on
a huge list of hinged round doors. In this MONSTER SAFE BOOK, Dave shows you many ways to open
any one of these really common safes…yep tons of McOmie tricks! And these safes are ALL OVER
THE PLACE! Four color covers, with 300 inside pages, show hundreds and hundreds of photos of the
doors and the guts. With the Dave book under your arm, opening these babies just got a LOT faster and
easier.
Amazingly crisp photos show you what’s under the covers, see the lock, wheels, fence, lever. Know exactly
what’s on the other side of that cover, and exactly where everything is before you even touch the safe! This
might just be Dave’s finest work EVER. Learn how to deal with dials, opening methods, scoping the change key hole, work
through the scope, transferring and more.
Manufacturers covered include: Amsec/Star, Armor, Cary, Chicago, Chubb, Diebold, Dominion, Eastern, Florida, Gary and
more…
#HRD-2 — $150.00
Volume 2 covers Hinged Round Doors, alphabetically Gross-Feibel thru York. Hinged round doors include
lug doors, non-lug doors, depository doors, wall safes, and more!
The book includes a 55 page “Introduction to Safecracking” that alone is worth double the cost of the
book.
Every safe in the book has Drill Points, Relocker Drill Points, Special Notes (where applicable),
Identification Tips, and Much Much More. Hundreds and hundreds of actual hinged round door openings
are covered in this series, with step-by-step documentation that walks the reader through each opening as
if he were on the job with Dave.
This book is nearly 400 pages long.
#HRD-3 — $150.00
This book covers only Mosler Safes.
All types of hinged round door safes are covered: Combination-Operated Non-Lug, Key-Operated, Round
Hoppers, Captain Wheel, Old and New Style Lug,, USPS/GSA and Mosler-Canada.
Extensive section on lock and relocker drill points. Lengthy section on dealing with the various mosler
dials. Provides details regarding the importance of the use of proper removal techniques for each style of
dial. Section on dealing with bearing plates, when and how to remove them and why.
40 years in the field and 9 years to assemble - 506 Pages - Thumbnails table of Contents.
Diary of a Safeman by C. L. Corey
#DIARY — $25.00
This book is a real gem… the private safe diary of old time safecracker C.L. Corey.
Back in the days of Al Capone the crooks were blowing safes with nitroglycerin and C.L. Corey was out
servicing and repairing those old safes. The book features an introduction by Dave McOmie.
Mr. Corey not only kept notes on all of his jobs, he also carefully photographed every safe he worked on.
Here in striking detail, we have reproduced this diary from the most exciting era in safe work, the early
1930’s. You’ll see all the great old safes from the past and you’ll learn how to open and repair them. Many
of these beauties are still in use today!
Safe Opening Articles 1987 by Dave McOmie
#SA-1 — $19.95
Now under one cover—all the informative safe opening articles by expert safeman, Dave McOmie.
This book contains articles reprinted from The National Locksmith issues, August 1986 through 1987.
Plus an all new introduction and new chapter on six-sided safes—not available anywhere else! Also
features many enlarged photos for easy identification. This book is a must for all serious safemen!
22 |
|
Since 1929
SAFE OPENING / ASSOCAITIONS
Safe Opening Articles by Dave McOmie
#SA-2 — $23.95
Dave McOmie’s original articles from when he first started writing for The National Locksmith are reprinted
in this book.
The first five years or so of Dave’s work is presented here so if you don’t have issues from the early 80’s
you will not want to miss a single drill point. Each article contains very valuable information to anyone who
ever works on safes.
Modern Safe Locks by Mark Bates
#MSL-1 — $95.00
You always wanted to make money servicing safes? You need this book! Even if you never touched a safe
before, you’ll be able to earn immediate profits with this easy-to-use book! The book details: • Original
factory combinations • Dialing instructions • UL and VdS ratings • Changing instructions • Guide to change
keys • Safe lock glossary • Safe lock compromises • Forbidden zones Learn how to service, troubleshoot
and change combinations on over 100 modern key, combination and electronic safe locks. The procedures
and photos are very detailed. Even a beginner can now make big profits in safe service!
Manipulation Home Study Course by Robert Sieveking
#MAN-1 — $49.95
Our home study course guides you on a step-by-step process, teaching you everything there is to know
about manipulation.
When you have learned this skill, you will be able to open locked safes by feel and touch alone!
Manipulation allows you to open the combination lock without drilling, and without doing any damage at all
to the safe.
With our Manipulation Home Study Course you learn at your own pace, in complete privacy. After each
step, you take a test to measure your understanding!
National Locksmith Automobile Association (NLAA) Membership
The big problem in automotive locksmithing is the tremendous amount of information you need to have at you fingertips.
Code locations, service procedures, key blank numbers, lock parts, linkage types, opening methods...the list is virtually
endless. To make matters even worse, this information is constantly changing.
Here’s what you get when you join the NLAA:
• Membership in NLAA, frameable Membership Certificate
• NLAA Photo ID Card • $10,000 Membership Bond for Automotive Work • A subscription to our monthly newsletter on
challenging cars PLUS...The NLAA Auto Service Guide on CD FREE! This CD contains detailed car software offering over
3,000 pages of information on foreign and domestic car service. Loaded with hundreds of photos, step-by-step opening
and service procedures! Techniques covered include code locations, lock and column disassembly, lockouts, and much
more. Hundreds of huge photos show you how to service domestic, foreign, and even high security vehicles with ease.
All known key blanks are given, as are all details you would need to work on the vehicle. That’s why you need to join the
National Locksmith Automobile Association (NLAA).
1 Year Membership National Locksmith Automobile Association (NLAA) USA
Item: NP-NLAA-D-1 Price: $125.00
Auto Service Guide on CD included FREE with your one year membership to NLAA
2 Year Membership National Locksmith Automobile Association (NLAA) USA
Item: NP-NLAA-D-2 Price: $250.00
Auto Service Guide on CD included FREE with your two Year Membership to NLAA
1 Year Membership National Locksmith Automobile Association (NLAA) Non-USA
Item: NP-NLAA-F-1 Price: $150.00
Auto Service Guide on CD included FREE with your one year membership to NLAA
2 Year Membership National Locksmith Automobile Association (NLAA) Non-USA
Item: NP-NLAA-F-2 Price: $300.00
Auto Service Guide on CD included FREE with your two Year Membership to NLAA
|
Since 1929
| 23
ASSOCIATIONS
National Safeman’s Organization (NSO)
To make big profits in safe work with no hassles...you need information!
Together, The National Locksmith and expert Dave McOmie operate the National Safeman’s Organization
(NSO). With over 1600 members globally, the NSO is the largest group of its kind in the world! Your NSO
membership delivers to your door a wealth of information and instructions on how to change combinations,
perform safe service and respond to lockouts. The NSO will help you build profits in this field. We’ll give
you the know-how you need!
Here’s what you get when you join the NSO:
• One year membership in the NSO • Membership certificate suitable for framing • Photo ID card •
BIG discounts off Dave’s safe manuals • 48+ page quarterly newsletter, The National Safeman, packed
with drill points and service procedures, to make openings a snap
1 Year Membership National Safemans Organization (NSO) USA
Item: NP-NSO-D-1 Price: $125.00
2 Year Membership National Safemans Organization (NSO) USA
Item: NP-NSO-D-2 Price: $250.00
1 Year Membership National Safemans Organization (NSO) Non-USA
Item: NP-NSO-F-1 Price: $150.00
2 Year Membership National Safemans Organization (NSO) Non-USA
Item: NP-NSO-F-2 Price: $300.00
AS AN ADDED BONUS WHEN YOU JOIN THE NSO…
Join for two years and choose any THREE of the books shown below FREE!
Join for one year and choose any one of the books shown below for FREE!
TEN YEARS OF DAVE MCOMIE
Contains 120 articles, 509 pages. This is Dave’s only hardcover book! Value $199.95. (On this option only,
a $9.95 s/h fee applies due to the weight of this heavy hardcover book)
ASK DAVE
Q & A with the Master. Value $75
GUN SAFES
Covers gun safes plus has a valuable section on opening both mechanical and electronic safe locks.
Value $110
HIGH SECURITY SAFES VOLUME 1
Covers popular high security safe manufacturers, from Bernardini to Tann. Value $175
PENETRATION PARTY
Covers more than 50 extremely popular safes, and has virtue of being retrospective: Dave critiques his
own opening methods, looking for ways to improve them. Value $110
SAFE OPENING VOLUME 2
Second installment of the classic books. Will not be reprinted when stock runs out. Value $110
phone: 630-837-2044
fax: 630-837-1210
24 |
|
Since 1929
97592 Eagle Way
THE NATIONAL LOCKSMITH MAGAZINE
The National Locksmith Monthly Magazine
Every month, we are out in the field dealing with the same headaches and profit opportunities as you. We pack along our
cameras and note books. Then we show you how to get through every job quickly, making the maximum profit on every call,
saving countless hours of head scratching. The “National,” as generations of locksmiths have called us, is a monthly full color
magazine that is going to make you more money every day. Our writers are all locksmiths. They are the best in the business.
2 Year Paper Subscription - USA w/ $15,000 Bond
Includes FREE digital Subscription with access to the 2009 thru Current Back issues!
Item: NP-SUB-D-2B Price: $91.00
2 Year Paper Subscription - USA
Item: NP-SUB-D-2 Price: $74.00
2 Year Digital Magazine Subscription w/ $15,000 Bond - USA&Canada
Item: NP-SUB-D-D2 Price: $65.00
1 Year Paper Subscription - USA w/ $15,000 Bond
Item: NP-SUB-D-1B Price: $63.00
1 Year Paper Subscription - USA
Free Digital subscription with access to 2009 thru Current Back issues!
Item: NP-SUB-D-1 Price: $46.00
1 Year Digital Magazine Subscription Anywhere in the world
Includes access to the digital Back issues 2009-Current
Item: np-sub-digit-d Price: $25.00
2 Year Digital Magazine Subscription Anywhere in the world
Includes access to the digital Back issues 2009-Current
Item: np-sub-digit-ds Price: $57.50
1 Year Paper Subscription - Canada
Item: NP-SUB-C-1 Price: $58.00
1 Year Paper Subscription - Canada w/ $15,000 Bond
Item: NP-SUB-C-1B Price: $73.00
2 Year Paper Subscription - Canada
Item: NP-SUB-C-2 Price: $99.00
2 Year Paper Subscription - Canada w/ $15,000 Bond
Item: NP-SUB-C-2B Price: $114.00
1 Year Subscription - Outside North America
Item: NP-SUB-F-1 Price: $72.00
2 Year Paper Subscription - Outside North America
Item: NP-SUB-F-2 Price: $125.00
Employee Bonds
Item: np-sb-e Price: $25.00
|
Since 1929
| 25
ORDER FORM
Fill out this order form and…
phone: 630-837-2044
fax: 630-837-1210
SELECT PAYMENT METHOD
r American Express
r Discover
r VISA
COMPLETE AND RETURN THISORDER FORM TO…
97592 Eagle Way
r Master Card
r Check
r Money Order
Card #_______________________________________________________________________________________________
Expiration Date_________________________________ Security Code___________________________________________
Signature____________________________________________________________________________________________
Your Name___________________________________________________________________________________________
Shop Name___________________________________________________________________________________________
Address (no P.O. Boxes)________________________________________________________________________________
City_________________________________________________________________________________________________
State_____________________________________________ Zip Code___________________________________________
Phone_____________________________________________eMail______________________________________________
Item#
Description
Qty.
Price
Shipping inside the Continental U.S.
This does not apply to Association Memberships or Magazine Subsriptions
Shipping outside the Continental U.S. add 20% of your order total
This does not apply to Association Memberships or Magazine Subsriptions
GRAND TOTAL
(All payments must be made in U.S. Funds)
26 |
|
Since 1929
$8.00

Books, Software, Associations, Automotive, Locks, Safes, Manuals

Transcription

Similar documents

Providing Quality Locksmith Supplies Since 1974

Fa-600 PoEN LED EM-Lock

Rekey a Door Lock with a Smartkey

The Cash Management safe Utility Chests

Locksmith Training - Foley

Gas Station Security Literature

Hot Slots Nes - Reglas De Blackjack Juego

R9044130608 Raaco Kufry na náradie SCT Key SERV

budukon event with dave and guy

These are Security risks! Security is about key control