Industrial Socket Testers 400V Truck and Coach Socket Tester

Industrial Socket Testers
Industrial Socket Testers
400V Truck and Coach
Socket Tester
Designed to give a safe, fast and
simple electric supply test for truck
and coach parks
Developed in conjunction with
Buddens coach company of
Hampshire (UK)
SOK 60/TCN - Fault Indication Chart
PHASE ROTATION
Indication
32 Amp BS 4343 5Pin (3P N+E)
G
Tough rubber holster for heavy duty use
G
Phases clearly identified as L1, L2, L3
G
Instant Phase sequence is given by 3 green LED‘s ’rotating‘
clockwise with a continuous tone or 3 red LED’s ’rotating‘
counter clockwise with a warbling tone
G
LED Display
Buzzer
All lives present
(with Neutral
connected)
Clockwise:
Continuous Tone
All lives present
(with Neutral
disconnected)
Clockwise:
Continuous Tone
All lives present
(with Neutral
connected)
Counter Clockwise:
Warble Tone
All lives present
(with Neutral
disconnected)
Counter Clockwise:
Warble Tone
MISSING PHASES
Neutral conductor present is indicated by green LED
Live 1 missing
No Tone
>flashing
Live 2 missing
No Tone
>flashing
BUZZER
Live 3 missing
No Tone
>flashing
SOK 60/TCN shows Neutral connected or
disconnected.
32 Amp BS 4343
5 Pin (3P N+E) Socket Tester
SOK 60/TCN
£64.95
SOK 60/TCN
GREEN / YELLOW - NEUTRAL
BROWN - L1 BLUE - L2 BLACK - L3
Face-on view of
socket/rear of plug
i
38
www.socketandsee.co.uk
L2
L1
L3
N
PE
See page 48 for a full range of Socket
Tester Adaptors
Phase Testers
Call +44 (0)1256 864100
Freefax Sales Order 0800 7831385
Phase Testers
So much safer than a neon!
Non contact phase detectors
When you use a neon screwdriver all that stands
between you and the full mains potential is a
single resistor, and guess what, the cheaper the
neon, the cheaper the resistor.
At a starting price of just £9.95, your safety
must be well worth it.
FEATURES
r
de
Fin
e
as
CT
Ph
DU
sy
r
O
Ea
de
PR 0 nal
Fin
e
3 io
F ss
as
EP ofe
Ph
r
Pr
sy
de
Ea
n
Fin
e
20 a
as
F tsm
EP af
Ph
Cr
sy
Ea
st
10 Te
F k
EP uic
Q
Easy Phase Finder uses a totally different
technique to find the live phase - it uses the
safest technology known - capacitive coupling there is no direct contact with the mains, as the
user you are totally protected.
No direct body/finger contact required to operate
Positive LED indication of live conductor
Positive LED PLUS tone indication of live conductor
Self test all functions to ensure correct working
Memory ‘find the true phase’ (eliminate phantom signals) function
Belt mounted carrying case included
PRICE £9.95
£14.95
£29.95
39
Phase Testers
Phase Testers
Quick Test Easy Phase Finder
G
Low cost solution to finding the phase - live supply
G
Does away with dim fragile neons, a bright LED gives
clear to read indication from dim to bright conditions
G
Construction and finger guard configuration give full
conformance with latest Euronorm safety standards
G
Fully drop proof from 2 metres gives robust working life
i
Optional Extra
Nylon Holster & Belt Loop
Quick Test Easy Phase Finder
EPF 10
£9.95
FFR HLT £5.95
Battery not supplied
(9V MN 1604 or similar)
Note: This holster is included with EPF 30
Explanation of symbols used on instrument
CATIII 300V
- Installation CategoryIII classification 300V AC to Earth
The phase finder is double insulated
Craftsman Easy Phase Finder
G
Built-in push button self test to guarantee correct working
G
Bright LED Plus continuous audible tone to indicate found
phase - live supply
Craftsmans Easy Finder
EPF 20
£14.95
Battery not supplied
(9V MN 1604 or similar)
200-250V∼
100-130V∼
All the features of EPF 10 PLUS:
BUZZER
380-415V∼
All Easy Phase Finders are suitable for use on 110V, 230V
and 400V mains supplies
Note this includes 400V AC mains phase to phase
supplies as the phase finder measures phase to earth
voltage which is a nominal 230V AC on a 400V AC
phase to phase mains supply
Specification
Voltage 50-300V AC to Earth
Frequency 50-60Hz
Current <5µA Installation category III
Professional Easy Phase Finder
Until now the limitation of all known phase - live detectors is that
under OPEN CIRCUIT parallel conductor conditions - testers will
give false indication of a live conductor. BUT with the EPF 30 even with a mixed bundle of open circuit conductors and only one
phase - live - EPF 30 will find the TRUE phase - live conductor.
G
Built-in push button self test to guarantee correct working
G
Bright LED Plus continuous audible tone to indicate found
phase - live supply
G
Patented TPL (True Phase Locator®) Technology finds the true
phase supply even in the presence of open circuit conductors
G
Auto power off to conserve battery life
G
Supplied complete with FREE tough nylon carry case (FFR HLT)
Professional Easy Phase Finder
EPF 30
£29.95
40
Battery not supplied
(9V MN 1604 or similar)
www.socketandsee.co.uk
BUZZER
So much safer
than a neon!
When you use a neon screwdriver all that
stands between you and the full mains
potential is a single resistor, and guess what,
the cheaper the neon, the cheaper the resistor.
Easy Phase Finder uses a totally different
technique to find the live phase - it uses the
safest technology known - capacitive coupling
- there is no direct contact with the mains,
as the user you are totally protected.
At a starting price of just £9.95,
your safety must be well worth it.
SOK 72EU
Phase Tester with Fused
Test leads
WHAT’S INCLUDED
SOK 72EU
Phase Tester with
Fused Test Leads
£69.95
SOKINS 72EU Instruction Manual
Included
SOK 001/6
Included
Carrying Case
SOK 72EU
Phase Testers
Call +44 (0)1256 864100
Freefax Sales Order 0800 7831385
£69.95
SOK 72EU - Fault Indication Chart
Buzzer
BUZZER
LED Display
Indication
Clockwise:
Continuous Tone
Counter Clockwise:
Warble Tone
All phases present
(P1,P2,P3)
G
The easiest-to-use Phase Tester on the market
No Tone
Phase 1 missing
G
Fitted with heavy duty rubber holster
No Tone
Phase 2 missing
G
Future proofed to conform with new European 3 phase
colour harmonisation directive HD 308:S2 ratified April 2001
No Tone
Phase 3 missing
For further information see:www.kewtechnik.co.uk/news.htm
G
Phases clearly identified as L1, L2, L3
G
Instant Phase sequence is given by 3 green LED‘s ’rotating‘
clockwise with a continuous tone or 3 red LED’s ’rotating‘
counter clockwise with a warbling tone
G
All leads and crocodile clips are fused and conform to Health
& Safety GS 38 and Supply Industry Engineering Rec M15/4
Conforms with the new European
3 phase colour harmonisation directive
HD308: S2 April 2001
Colour Code
Old and
Existing UK
Harmonisation
HD308:S2
Protective conductor
Neutral conductor
Phase 1
Phase 2
Phase 3
41
Easy Fuse Finders
Easy Fuse Finders
The simplest way to
detect fuse and circuit
breakers
• Automatic scanning technology
• Clear, positive indication even under
noisy circuit conditions
Don’t just take our word for it...
I found Fuse Finder really useful, and it is
something I would make a lot of use of.
Mark Wildish Burdock Electrical, UK
Before, I didn’t think we would be
finished with our task until the end of
March. Now, with the Fuse Finder on the
job, we should be wrapping up in a couple of weeks.
Floyd H. Rodgers Director of Circuit Study,
The Woodstock Opera House, USA
Easy Fuse Finders
on
CT ncti
DU tifu er
ul est
O
it
PR 0 Muit T
rK
de
20 irc
in
F C
F
DC ad
se
De 0UK Fu
t
Ki
4 ge
er
11 ta
l
d
o
Fin
CB l V
FF a
o
se
ur
Du
UK Fu
tE
30 ge
Ki
11 olta
ns
CB l V
cia
FF a
tri
Du
U lec
t
0E l E
Ki
20 iona
ns
CB ss
cia
FF rofe
tri
K lec
P
0U al E
20 ion
o
CB ss
ur
FF ofe
rE
Pr
U de
0E Fin
10 se
CB Fu
FF sy
K der
Ea
0U Fin
10 se
CB Fu
FF asy
E
FEATURES
Traces MCB-Fuses-Dis Boards
Battery powered receiver
Uses live circuits to trace
Uses dead circuits to track
Auto memory level for circuit/fuse detect
Live circuit warning
230V AC transmitter operation
230 + 110V AC (including 55-0-55 V AC operation)
Full accessory connector pack for 230V and 110V
(including blue and yellow plugs)
Circuit tracing in walls and floors (up to 50cm)
PRICE £54.95 £54.95 £99.95 £99.95 £129.95 £149.95 £149.95
42
www.socketandsee.co.uk
FFCB100 UK
Easy Fuse Finder
WHAT’S INCLUDED
Receiver
FFCB100 UK
Easy Fuse Finder
£54.95
FFCB RCV
FFCBINS
Instruction Manual
Included
FFCB 100UK
£54.95
Battery not supplied. (9V MN 1604 or similar)
Easy Fuse Finders
Call +44 (0)1256 864100
Freefax Sales Order 0800 7831385
Additional/spare Test Leads available - see page 23-25
ALSO AVAILABLE
FFCB 100EU
£54.95
EU Heavy Duty Socket Tester
Transmitter
TX 100UK
Principles of automatic
scanning
The scanning head uses a ferrite transducer to
detect the signal and like a portable radio varying the
angle at which the receiver is held (in relation to the
breaker) will affect the strength of the signal received.
As the receiver works by automatically comparing the
strength of signal received from one breaker with the
others it is essential to compare like with like by
keeping the scan head at a consistent angle
No more fiddly adjustment controls
G
Auto power-off extends battery life
G
Works equally well on circuit breakers or fuses
G
Positive fuse/breaker location even under noisy circuit conditions
ING
G
NN
First Fuse Finder to use modern automatic scanning technology
45º SCA
G
OMATIC SCA
NN
T
AU
IN
i
G H
EAD
See page 44 for Technical Specification
43
Easy Fuse Finders
WHAT’S
Easy Fuse Finders
IN THE KIT
FFCB 200UK
Easy Fuse Finder Kit
Contents
Receiver
TX 200UK
Transmitter
£28.95
FFCB RCV
Receiver
£36.00
IEC 2P
IEC lead to probe or croc clips £24.95
TECC 40
Carrying Case
£19.95
IECP UKA
IEC lead to 13 amp plug
Included
FFCBINS
Instruction Manual
Included
* European kit IEC Plug to 13A plug is replaced by
IEC plug to round pin CEE 7/VII Euro plug
FFCB RCV
FFCB 200UK
Transmitter
KITSAVER
PRICE
£109.85
£99.95
Battery not supplied. (9V MN 1604 or similar)
TX 200UK
ALSO AVAILABLE
FFCB 200EU Professionals Electricians Kit Euro
Euro Kit features as FFCB 200UK
except 13A plug replaced by round
pin CEE7/VII Euro plug
£99.95
SOK 42EU
Battery not supplied. (9V MN 1604 or similar)
Specifications for FFCB 100UK, FFCB 100EU, FFCB 200UK
and FFCB 200EU
For use on 230V 50Hz Mains supply
Current consumption: <20mA L-N No RCD Trip
Features as FFCB 100 plus
G
Full Kit gives easy connection to 13A BS 1363
sockets plus distribution boards and lighting circuits
G
All test leads and connectors fully conform to IEC,
HSE GS38 and Supply Industry M15/4 standards
and recommendations
G
Custom case means less chance of leaving units
behind on site
IECP UKA
IEC 2P
TECC 40
44
www.socketandsee.co.uk
Calibration: The microprocessor is self-calibrating, no other
form of calibration is necessary
This product is EMC and LVD compliant
FFCB 1130UK
WHAT’S
Dual Voltage Fuse Finder Kit
Receiver
IN THE KIT
Contents
FFDV TX
IECP UKA
FFDV TX
Dual Voltage Transmitter
FFDV RCV
Dual Voltage Receiver
£39.95
£49.95
IEC 2P
2 pole Fused Test Lead Set
£24.95
TECC 40
Carrying Case
£19.95
IECP UKA
IEC lead to 13 amp plug
Included
FFCBINS
Instruction Manual
Included
Easy Fuse Finders
Call +44 (0)1256 864100
Freefax Sales Order 0800 7831385
£134.80
FFCB 1130UK
KITSAVER
PRICE
£129.95
Specifications for FFCB 1130UK
IEC 2P
For use on 110 -230V 50 - 60Hz Mains supply
(including 55-0-55V AC Systems)
Current consumption: <20mA L-N No RCD Trip
DUAL VOLTAGE
100-130V
Calibration: The microprocessor is self-calibrating, no other
form of calibration is necessary
+
This product is EMC and LVD compliant
Transmitter
FFDV RCV
G
TECC 40
Works equally well on 110V AC (including
55-0-55V AC) and 230V AC systems.
45
Easy Fuse Finders
WHAT’S
Easy Fuse Finders
IN THE KIT
FFCB 1140UK
Dual Voltage Fuse Finder Kit
Transmitter
Contents
FFDV TX
Dual Voltage Transmitter
£39.95
FFDV RCV
Dual Voltage Receiver
£49.95
IEC 2P
2 pole Fused Test Lead set
£24.95
IECP 16Y
IEC plug to (16A (2P+E) 110V
Yellow BS4343 Industrial plug
£14.95
IECP 16B
IEC plug to 16A (2P+E) Blue
230V BS4343 Industrial plug
£14.95
TECC 40
Carrying Case
£19.95
FFRHLT
Nylon Holster
Included
IECP UKA
IEC plug to 13A plug
Included
FFCBINS
Instruction Manual
Included
FFDV TX
IECP 16B
£164.70
FFCB 1140UK
KITSAVER
PRICE
£149.95
Battery not supplied (9V MN 1604 or similar)
IECP 16Y
Specifications for FFCB 1140UK
For use on 110 -230V 50 - 60Hz Mains supply
(including 55-0-55V AC Systems)
Current consumption: <20mA L-N No RCD Trip
IEC 2P
Calibration: The microprocessor is self-calibrating, no other
form of calibration is necessary
This product is EMC and LVD compliant
DUAL VOLTAGE
100-130V
BS EN
61010-1
+
FFR HLT
Receiver
FFDV RCV
TECC 40
G Features as FFCB 1130UK but see ‘What’s in
the Kit’ for full details
46
www.socketandsee.co.uk
IECP UKA
DCF 200
WHAT’S INCLUDED
Multifunction
Dead Circuit Finder
DCF 200TX
Transmitter
Find that dead circuit - fast!
DCF 200RX
Receiver
£84.95
DCFINS
Instruction Manual
Included
TECC 10
Carrying Case
Included
Receiver
£65.00
DCF 200
Easy Fuse Finders
Call +44 (0)1256 864100
Freefax Sales Order 0800 7831385
£149.95
DCF 200RX
Bright, easy to read LED’s
Clear Audible Indication
Error Free Testing
DCF 200 Features
Receiver
• Simple operation by single button
• Automatically adjusts to received signal strength no
fiddly volume wheels or range buttons
Transmitter
• Works up to 1metre away
DCF 200TX
• Dual audible/visual indication
• Auto power-off
• Low battery indication
• Self check facility (using transmitter)
Transmitter
• Simple operation by single button
• Battery powered- does not use mains supply
• Auto power-off
• Low battery indication
• Drives long cables
CONTINUOUS WIRE - 5 LIGHT
READING - CONTINUOUS TONE
BROKEN WIRE - 1 LIGHT
READING AND AUDIBLE ALERT
Applications:
G
Fuse Finding - find which fuse is feeding the dead circuit
G
Wire Tracing - trace wires through floors and walls
G
Wire Picking - pick the correct wire from a bundle or loom
G
Wire break detection - locate a break in a wire
G
Find a circuit by identifying the individual conductor
G
Trace cables up to 50cm away
G
Internal battery, 9V cell operation for both transmitter and receiver
G
4 - Way product - Simple to use
G
Carrying case included
NEW
• Works with or without an earth
• Warning of short circuit or potentially hazardous
voltages
• Protected against accidental mains connection up
to 440V
Power
9V alkaline battery for both transmitter and receiver,
2 x MN 1604 or similar (not included)
Intelligent Auto power-off system
Environmental
0 to 40ºC
80% humidity @ 31ºC linearly decreasing to 50% @ 40ºC
Standards
CE Marked
Complies with BS EN 61010-1: 300V Cat III (receiver)
Complies with BS EN 61326 (with amendment A1)
BS EN
61010-1
47
Cases and Accessories
Cases and Accessories
TECC 10
G
Socket Tester Adaptors
Single Instrument Carrying Case
G
Enables single tester to cover different plug types and sizes
G
All plugs and sockets used conform to IEC/EN 60 309 (BS 4343)
Single Instrument
Carrying Case
TECC 10
£14.95
Instruments not included
TECC 30
G
G
110V SOK 50 Adaptor
SOK ADP50
£19.95
Multi Instrument Carrying Case
Multi Instrument
Carrying Case
G
TECC 30
£29.95
Instruments not included
TECC 40 (Not Illustrated)
G
Fuse Finder (or similar)
Instrument Carrying Case
Converts 16A tester into 32A
(16A socket to 32A plug)
230V SOK 40 Adaptor
SOK ADP40
£19.95
Fuse Finder Instrument
Carrying Case
TECC 40
£19.95
G
TECC 50
G
Converts 16A tester into 32A
(16A socket to 32A plug)
Converts 16A 5 pin tester into 32A 5 pin
(16A 5 pin socket to 32A 5 pin plug)
400V SOK 65 Adaptor
Multi Instrument Carrying Case
SOK ADP 65
£33.95
Multi Instrument
Carrying Case
TECC 50
£29.95
G
Instruments not included
Converts 16A 4 pin tester into 16A 5 pin
(16A 4 pin socket to 16A 5 pin plug)
400V SOK 605/16 Adaptor
SOK 605/16
Socket Opener
£29.95
NOTE: Only for use by qualified
electricians and electrical engineers
13A Socket Opener
Distributor Note:
SOK 13SO
supplied in
packs of 10
SOK 13SO
£0.49
G
The safest way to open shuttered sockets to check for voltage present
G
Tough poly-carbonate construction
G
Converts 16A 4 pin tester into 32A 4 pin
(16A 4 pin socket to 32A 4 pin plug)
400V SOK 60 Adaptor
SOK ADP60
£29.95
Batteries
G
Pack of 4 x AA
alkaline batteries
48
www.socketandsee.co.uk
Converts 16A 4 pin tester into 32A 5 pin
(16A 4 pin socket to 32A 5 pin plug)
400V SOK 605/32 Adaptor
SBX 4AA
SOK 605/32
£2.95
£33.95
Call +44 (0)1256 864100
Freefax Sales Order 0800 7831385
Call +44 (0)1256 864100
Freefax Sales Order 0800 7831385
Cases and Accessories
Voltage Testers
Fully Insulated
- no finger contact
G
No finger contact to operate
G
Clearly identifies phase-neutral/earth
G
Bright indication even in sunlight
G
Simple microwave leakage test
G
Drop proof from a height of 3 metres
G
Quality tough poly-carbonate construction
140mm Contact
Voltage Detector
140mm Non-contact
Voltage Detector
NCT 0314
£4.95
Supplied with Batteries
(2 x CR 41 or similar)
All features as NCT 0314 except finger
contact required to operate additional
functions:
G
Continuity test
G
Battery test
NCT 0316
£4.95
Supplied with Batteries
(2 x CR 41 or similar)
Test Documentation
Minor Electrical Installation
Works Certificate
Minor Electrical
Installation Works Certificate
Minor Works Certificate
MEW 001
Kew Technik Group Ltd
Rankine Road
Basingstoke
RG24 8PP
www.socketandsee.co.uk
Re-order No. MEW-001
£14.95
Electrical Installation
Certificate
Electrical Installation
Certificate
Electrical Installation Certificate
EIC 002
Kew Technik Group Ltd
Rankine Road
Basingstoke
RG24 8PP
www.socketandsee.co.uk
G
Clear easy to use documentation
G
The four most used certificates, schedules and reports
G
Carbonless - no messy carbon paper to lose
G
A professional document to hand to your client
Re-order No. EIC-002
£14.95
Inspection & Test Results
Schedule
Inspection & Test
Results Schedule
Inspection & Test Schedule
ITS 003
Kew Technik Group Ltd
Rankine Road
Basingstoke
RG24 8PP
www.socketandsee.co.uk
Re-order No. ITS-003
£14.95
Periodic Inspection Report
Periodic Inspection Report
Periodic Inspection Report
PIR 004
£14.95
Kew Technik Group Ltd
Rankine Road
Basingstoke
RG24 8PP
www.socketandsee.co.uk
Re-order No. PIR-004
49
Digital Thermometers
Digital Thermometers
Digital Thermometers
i
Optional Extra
Digital Thermometer
SINGLE
INPUT
THERMOMETER
MT 630
TEMPERATURE
COMPENSATOR
£59.95
MODE
MT630 & MT632
These MT630 and MT632 K-Type general
purpose thermometers have a wide
measuring range from –50°C to +1300°C
with a selectable resolution of 0.1°C or
1°C. Features include a Max Hold for
recording maximum temperatures over a
period of time, a Data Hold button, and
°C or °F display of readings, supplied with
a protective rubber holster.
Carrying Case
Securely holds Digital
Thermometer and a selection of
Temperature Probes in a zipped
durable vinyl case.
Function
MAX
RECORD
TYPE
MODE
THERMOCOUPLE
K
K-Type
-50˚C TO 1300˚C
Thermocouple
MEASUREMENT
MAX
HOLD
DATA
HOLD
0.1˚C & 1˚C
OF READING
FUNCTION
RESOLUTION
SELECTION
AUTO
MEASUREMENT
POWER
SELECTABLE
Basic Accuracy
Best Resolution
OFF
170 x 82 x 43mm
340g
K-Type
DUAL
THERMOMETER
Thermocouple
£79.95
Temperature Probe Rubber Holster
MT632
Range
INPUT
0.1°C
Dimensions (LxWxD)
Standard Accessories
MT 632
± (0.5% + 1°C)
200 Hours Typical
Weight
Digital Thermometer
50°C to + 1300°C, -58°F to +2000°F, 223K to 2000K
Battery Life (Alkaline Battery)
Function
T1, T2, T1-T2
£14.95
MT630
Range
TEMPERATURE
MT 651
Basic Accuracy
Best Resolution
50°C to + 1300°C, -58°F to +2000°F
± (0.5% + 1°C)
0.1°C
Battery Life (Alkaline Battery)
200 Hours Typical
Dimensions (LxWxD)
170 x 82 x 43mm
Weight
340g
Standard Accessories
2 Temperature Probes Carrying Case
Function
MT694
-20°C ~ + 270°C, -4°F ~ + 518°F
± 2°C, ±3.5%
1°C
500mS
0.95
8:1
-20°C ~ + 270°C
Infra-Red Thermometers
MT694 & MT695
Ideal for measuring temperatures in awkward,
hazardous or electrically live objects where
physical contact is not possible - the MT694 and
MT695 have a laser beam to assist the operator.
All units have a quick response time and an auto
power off mode so as to conserve battery power.
SELECTABLE
˚C & F˚
FIXED
0.95
RESOLUTION
EMISSIVITY
DATA
HOLD
AUTO
FUNCTION
POWER
OFF
BUILT-IN
LASER
POINTER
Temperature
Range
Basic Accuracy
Best Resolution
Responsive Time
Emissivity
Distance/Spot Ratio
Type K Range
Instrument Shape Mini Gun Type
Keys
Power Source
Battery Life (Alkaline Battery)
Dimensions (LxWxD)
Weight
Standard Access
Function
Temperature
DISTANCE
DISTANCE
SPOT RATE
SPOT RATE
TEMPERATURE
TEMPERATURE
TYPE
MEASUREMENT
MEASUREMENT
THERMOCOUPLE
Infra-Red Thermometer
Infra-Red Thermometer
MT 694
MT 695
£89.95
£139.00
8:1
-20˚C TO 270˚C
50
www.socketandsee.co.uk
12:1
-50˚C TO 550˚C
K
Range
Basic Accuracy
Best Resolution
Responsive Time
Dimensions (LxWxD)
Emissivity
Distance/Spot Ratio
Instrument Shape Mini Gun Type
Keys
Power Source
Battery Life (Alkaline Battery)
Dimensions (LxWxD)
Weight
Standard Access
4 Keys
1 x 9V Battery
100 Hours Typical
159 x 79 x 57mm
180g
Instruction Manual, Battery
MT695
-50°C ~ + 550°C, -58°F ~ + 1000°F
± 2°C, ±1.5%
0.1°C
500mS
155 x 73 x 47mm (Incl Holster)
0.95
12:1
4 Keys
1 x 9V Battery
100 Hours Typical
160 x 82 x 42mm
180g
Case, Instruction Manual, Battery
Temperature Probes
General Purpose Probe
MT 660
£6.95
MT660
MT685
The MT660 General Purpose Probe can be used on all
Major Tech type K digital thermometers and DMM’s.
Range up to +250°C. Exposed thermocouple with PTFE
Insulation for general purpose use in heating and
refrigeration industries, including radiator fan, water and
air temperatures.
The MT685 General Purpose Probe can be used on all
Major Tech type K digital thermometers and DMM’s.
Range from -50°C up to +649°C. Very strong for liquids,
semi-solids, air and granular material.
General Purpose Probe
MT 685
£29.95
MT670
Surface Probe
MT 670
£29.95
The MT670 Surface Probe can be utilised with Major Tech
type K digital thermometers and DMM’s. Range from 50°C up to +500°C. Very fast response for surface
temperature measurement for sheet metal, radiators,
photocopier, rollers, etc.
MT690 TEMPERATURE PROBE KIT
The MT690 complete probe kit consists of a handle which
uses interchangeable surface, air and general purpose probes.
This is a low cost but effective thermometer probe kit. Fits all
Major Tech type K digital thermometers and DMM’s.
MT672
The MT672 is an Oven Probe for use on all Major Tech
type K digital thermometers and DMM’s. Range from 50°C up to +450°C. Extremely fast response for measuring
temperatures in ovens.
GENERAL PURPOSE PROBE
50°C up to 649°C. Useful probe for the temperature
measurements of liquid and semi-solids..
Oven Probe
MT 672
£24.95
Surface Probe
MT 675
£29.95
SURFACE TEMPERATURE PROBE
MT675
50°C up to 500°C. Fast response probe. Ideal for heavy duty
temperature measurement of various surfaces
The MT675 Surface Probe can be utilised with Major Tech
type K digital thermometers and DMM’s. Range from 50°C up to +500°C. The right angle of the probe is used
for where space is a problem and normal probes cannot be
utilised. Very fast response for surface temperature
measurement for sheet metal, radiators, photocopier,
rollers, etc.
AIR TEMPERATURE PROBE
50°C up to +300°C. Perfect for fast response air and gas
temperature measurement.
Temperature Probe Kit
MT680
Air Probe
MT 680
£29.95
Temperature Probes
Call +44 (0)1256 864100
Freefax Sales Order 0800 7831385
MT 690
The MT680 Air Temperature Probe can be used on all
Major Tech type K digital and DMM’s. Range from -50°C
up to +300°C. Extremely fast response for gas and
air temperatures for refrigeration, heating and
ventilating engineers.
KITSAVER
PRICE
£159.00
Temperature Monitoring Kits
KIT SAVER
MT650
MT652
Kit comprises:
Kit comprises:
MT630 Digital Thermometer
MT632 Dual Input Digital
Thermometer
MT660 General Purpose
Bead Probe
MT690 Probe Kit consisting of
a Surface Probe, Air Probe and
General Purpose Probe
MT651 Carrying Case
MT660 General Purpose
Bead Probe
MT690 Probe Kit consisting of
a Surface Probe, Air Probe and
General Purpose Probe
MT651 Carrying Case
Digital Thermometer Kit
Digital Thermometer Kit
MT 650
KITSAVER
PRICE
£159.00
MT 652
KITSAVER
PRICE
£179.00
51
Light Meter / Distance Meter
Light Meter / Distance Meter
Light Meter
Function
MT940
Range Lux
Range Foot Candles
Light
Basic Accuracy
Best Resolution
Type
Photosensor
Dimension (LxWxD)
Lead Length
Power Supply
200 -2000 -20000 -50000 Lux
1FC = 10.76 Lux
±5%+10dgt
0.1 Lux
One Silicone photo cell with filter -Sealed Housing
115 x 64 x 27mm
1.2m
1 x 12V A23 Battery
Battery Life (Alkaline Battery
200 Hours Typical
Dimensions (LxWxD)
188 x 64 x 25mm
Weight
Standard Accessories
160g
Photo Sensor, Carrying Case
Instruction Manual, Battery
MT940
The versatile MT940 is an essential tool for Designers or Quality
Assurance Managers to check lighting levels in a wide variety of
situations, from office environments to sports venues. The MT940
is easy to use providing an accurate light level display in terms of
LUX (or Foot Candles) over a wide range. New features include
the MAX Hold of a reading and the Data Hold function.
AUTO
MAX
HOLD
DATA
HOLD
SEALED
0.1 TO 50,000
POWER
OF READING
FUNCTION
CELL
MEASUREMENT
OFF
LUX
LUX
Light Meter
MT 940
£39.95
Ultra-sonic Distance Meter
MT130
The MT130 is intended for a fast, convenient distant
measurement. Three buttons make measurements a
simple procedure and a built-in laser beam ensures
the user has the correct intended surface for
measuring distance.
DYNAMIC
BUILT-IN
TOP OR BOTTOM
CASE
VOLUME
MEASUREMENT
LASER
TO SOLID OBJECT
MEASUREMENT
COMPUTATION
CAPABILITY
POINTER
Ultra-sonic Distance Meter
MT 130
£59.95
52
AREA &
DISTANCE
0.6m TO 15m
www.socketandsee.co.uk
Function
Measurement Range
MT130
0.6m to 15m
Resolution
0.01m
Accuracy
± 0.5% + 1 Digits
Calculation Range
Aperture Angle
Length: 999.9m, Area: 999.9m, Volume: 999.9m
± 5 Degrees
Display
5 digit LCD Display
Dimensions (LxWxD)
123 x 60 x 39mm
Weight
126g
Power
1 x 9V PP3 Battery
Voltage Testers
MT400
The pocket sized MT400 voltage detector is ideal
for general use. Clear indication of the presence of
voltage is given by the illumination of the tip. The
unit comes complete with batteries and can be used
on voltages between 50V and 600V AC.
RED
DETECTS
CHECKS
Function
AC Voltage
Operating Temperature
Safety Standards
Power Source
MT400
50 -600V
-10°C to +55°C
95% (0°C to +30°C)
75% (+30° to +40°C)
45% (+48°C to +55°C)
IEC1010 Cat III 600V AC max
2 x AAA Batteries (included)
Function
DC Voltage
AC Voltage
Continuity
Safety Standards
Power Source
Battery Life
Dimensions (LxWxD)
Weight
MT470
6V -12V -24V -48V -110V -220V
12V -24V -48V -110V -230V -400V -690V
Audible Threshold 0-85K
EN1010, EN61010-2-031, EN50081-1 & EN50082-1
2 x AA Batteries
(Alkaline Battery) 350 Hours Typical
135 x 51.5 x 38.5 mm
182g
Operating Humidity
Voltage Testers
Call +44 (0)1256 864100
Freefax Sales Order 0800 7831385
LOCATES
GLOW
50V TO 600V
EARTH
BREAKS
TIP
AC VOLTAGE
CONNECTION
IN WIRING
Voltage Tester
MT 400
£14.95
KTVT 100
G
Allows quick and safe checking of voltage ranges
G
Bright LED‘s indicate 200-260V or 360-440V AC
G
Designed to VDE 0380 Part 2
G
Tips comply with HSE recommendation GS 38
G
Self powered - no batteries required
G
BS EN 61010
LED
LEADTIPS
MEASUREMENT
GS38
CONFORMS TO
INDICATION
Voltage Tester
KTVT 100
£14.95
MT470
The MT470 is a combined two-pole tester for
Continuity and Voltage measurements. The
instrument will automatically turn on when the probes
are placed across a complete circuit, it then selects
between Continuity or AC/DC Voltage, and has an
LED indication for AC and DC voltage levels. The
meter complies with EN61010-1 and EN61010-2-031
CAT lll. The holster ensures that the tips of both
probes are correctly spaced to measure the voltage
from European plug sockets.
UP TO
690V AC
LEADTIPS
INDICATION
MEASUREMENT
MEASUREMENT
GS38
LED
CONFORMS TO
BUZZER
& VISUAL
IEC 61010-1
1000V CAT III
CONTINUITY
SAFETY PROTECTION
Voltage Tester
MT 470
£39.95
53
Better tools at unbeatable prices
www.kewtechnik.co.uk
Tools designed by electricians for electricians
Distributed by
Socket & See Limited.
Rankine Road, Basingstoke RG24 8PP,
United Kingdom.
Tel +44 (0)1256 864100 Fax +44 (0)1256 864164
Distributor Freephone Sales Order Fax 0800 7831385
e-mail: [email protected]
www.socketandsee.co.uk
Socket & See reserves the right to improve product specifications without
prior notice. © Socket & See Limited
(A division of the Kew Technik Group of companies)