PPE, Workplace Signs and Drug Testing Catalogue (4mb pdf)

Transcription

1/61 Hargreaves Street, Edmonton Q 4869
PO Box 925, Edmonton 4869
Tel: 07 4055 5080 Fax: 07 4055 5090
Mobile: 0438 139 928
Email: [email protected]
Web: www.csisnq.com.au
Cairns Safety & Industrial Supplies
PPE Catalogue
PPE Catalogue - Index
Hi-Vis Vests and Jackets
Jackets
Polo Shirts
Safety Vests
Hi-Vis Rainwear
Hi-Vis Freezerwear
Hats
Disposable Clothing
Gloves
Chemical Gloves
Contego Gloves
Cut Resistant Gloves
Disposable Gloves
General Purpose Leather Gloves
General Purpose Synthetic Gloves
Specialty Leather
Specialty Synthetic
Disposable Respirators
Re-Useable Respirators
Supplied Air Respirators/Airvisors
Eye Protection
Hearing Protection
PVC Footwear
Workplace Safety Signs
Workplace Drug and Alcohol Testing Devices
PPE Catalogue © 2010
Page No.
3
3
5
6
7
8
9
10
12
12
15
15
17
19
23
26
28
29
31
33
34
38
46
47
49
Page 2 |
Hi-Vis Vests & Jackets
High visibility plays a huge role in workplace safety. Be seen, be safe is a proven fact. The trick is finding the right High
Visibility clothing and quality for your specific application. Thankfully Frontier has done the hard work and sourced the
widest possible range of High Visibility clothing for virtually every industrial and workplace application
Frontier '6 in 1' Glacier Jacket (Class D/N)
•
•
•
•
•
•
•
•
•
•
•
•
•
Hi-visibility heavy duty 300DD oxford/polyurethane
coated breathable outer with 3M reflective tape which
complies to AS/NZS 4602 Day/Night Use
Fully waterproof outer shell with sealed seams
Outer jacket acts as breathable raincoat when vest is
removed
Complete inner vest with 3M reflective tape
Removable vest - reversible, Hi-Vis & Polarfleece
Heavy duty YKK zip
Front storm placket
Velcro front storm placket & flap pockets
Mobile phone pocket inside outer jacket
ID pocket
Concealed hood
Deep inside pocket
Hip length jacket
Sizes:
Frontier ‘4 in 1' Altitude Jacket (Class D/N)
•
•
•
•
•
•
•
•
•
•
•
Hi-visibility heavy duty 300DD oxford/polyurethane
coated breathable outer with 3M reflective tape which
complies to AS/NZS 4602 Day/Night Use
Fully waterproof outer shell with sealed seams
Outer jacket acts as breathable raincoat when vest is
removed
Removable vest - reversible, Hi-Vis & Polarfleece
Heavy duty YKK zip
Front storm placket
Velcro front storm placket & flap pockets
Mobile phone pocket inside outer jacket
Concealed hood
Deep inside pocket
Hip length jacket
Sizes
SM - 8XL
SM - 8XL
Colour Options:
Colour Options:
IC-HV090> Yellow / Navy
IC-HV095> Orange / Navy
IC-HV6000> Yellow / Navy
IC-HV7000> Orange / Navy
Page 3 |
Frontier Flying Jacket
(Class D/N)
•
•
•
•
•
•
•
•
Hi-visibility heavy duty
200DD oxford outer with 3M
reflective tape which
complies to AS/NZS 4602
Day/Night Use
Fully waterproof outer with
sealed seams
Heavy duty YKK nylon zip
Front storm placket
Concealed hood
Quilt lining
Ribbed waistband, cuffs &
collar
Sizes:
SM - 6XL
Colour Options:
IC-HV003YR> Yellow / Navy
Frontier Flying
Jacket (Class D)
•
•
•
•
•
•
•
200DD oxford outer
which complies to
AS/NZS 4602 Day Use
only
Fully waterproof outer
with sealed seams
Heavy duty YKK nylon
zip
Front storm placket
Concealed hood
Quilt lining
Ribbed waistband, cuffs
& collar
Sizes:
SM - 6XL
Colour Options:
IC-HV003Y> Yellow / Navy
IC-HV003OR> Orange / Navy
Frontier Pilot Jacket
(Class D/N)
•
•
•
•
•
•
•
•
•
•
•
•
300DD oxford outer with
3M reflective tape which
Day/Night Use
Fully waterproof outer shell
with sealed seams
Front storm placket
Pressed stud front storm
placket & flap pockets
Internal mobile phone
pocket
Polar fleece collar
Concealed hood
Quilt lining
Ribbed waistband and
cuffs
Deep inside pocket
Waist length
Sizes:
SM - 6XL
Colour Options:
IC-HV035R> Yellow / Navy
IC-HV045R> Orange / Navy
Frontier Alaskan
Jacket (Class D/N)
•
•
•
•
•
•
•
•
•
•
•
300DD oxford outer with
3M reflective tape which
Day/Night Use
Fully waterproof outer
shell with sealed seams
Front storm placket
Velcro front storm placket
& flap pockets
Concealed mobile phone
pocket
Polar fleece collar
Concealed hood
Quilt lining
Deep inside pocket
Hip length
Sizes:
SM - 6XL
Colour Options:
HV054Y> Yellow / Navy
HV054OR> Orange / Navy
Page 4 |
Frontier Cool-Vis Micromesh Polo Shirt
A unique blend of comfort and performance in a
Micromesh shirt. Super comfortable workwear that
breathes where you need it most.
Combining a polyester and cotton blend in its
construction, with the added benefit of a mesh insert in
the underarm area of the garment allows for a faster cool
down process.
Soft, lightweight, high visibility fabric allows flexibility of
movement and a more comfortable way to work.
•
•
•
•
Lightweight breathable 50% polyester fabric / 50%
cotton lined
Three button placket front
Rated UPF50+ sun protection
Under arm mesh vents
Frontier Micromesh Polo Shirt (Class D/N)
•
•
•
•
Lightweight breathable 50% polyester fabric / 50%
cotton lined
Three button placket front
Rated UPF50+ sun protection
3M reflective striping to AS/NZS 4602 Day/Night use
Sizes:
SM - 6XL
Colour Options:
Long
HV4010> Yellow / Navy
Short Sleeve
HV4020> Yellow / Navy
Sizes:
SM - 6XL
Colour Options:
Long
Short Sleeve
Page 5 |
Frontier Safety Vest
(Class D/N)
•
•
•
Complies to AS/NZS 4602
Day/Night Use
Extra length at back for maximum
visibility when bending
H Pattern Reflective
Sizes:
M - 3XL
Colour Options:
IC-SDV12L> Hi-Vis Yellow
IC-SDV12OR> Hi-Vis Orange
Frontier Safety Vest
(Class D)
•
Complies to AS/NZS 4602 Day
Use Only
Frontier Boston Vest
(Class D/N)
•
Sizes
M - 3XL
Colour Options:
SDV02L> Hi-Vis Yellow
SDV02OR> Hi-Vis Orange
•
•
•
•
•
•
Hi-visibility heavy duty 300DD
oxford/polyurethane coated outer
with 3M reflective tape which
Day/Night Use
Fully waterproof outer shell with
sealed seams
Polarfleece lining
Internal mobile phone pocket
Bevelled outside pocket with top &
side entry
Waist length with scallop tail for
extra protection
Sizes
M - 6XL
Colour Options:
HV070> Hi-Vis Yellow
HV080> Hi-Vis Orange
Page 6 |
Hi-Vis Rainwear
Frontier Hi-Vis Rainwear
Chicago Breathable Rainwear
•
¾ length Rain Coat Zip Front
•
•
•
•
•
PVC/Polyester, Yellow, Storm Water Front with
Collar and Detachable Hood, with Extra Zipper
under Press Studs
Available with Reflective Tape Complying to
Australian Standards AS/NZS 4602:1999
Sizes:
SM - 5XL
Colour Options:
IC-500C > Yellow (Warm)
Rain Trousers
•
Elastic Waist
Sizes: SM - 5XL
Colour Options:
IC-500T > Yellow (Warm)
PVC Overall
•
•
Heavy duty waterproof combination overall
Zip and button front complete with hood
Hi-Visibility Chicago Breathable Raincoat
(Class D/N)
•
•
•
•
•
•
•
•
•
Sizes: SM - 5XL
Colour Options:
IC-HV002Y > Hi-Vis Yellow
IC-HV006OR > Hi-Vis Orange
Hi-Visibility Chicago Breathable Rain Trousers
(Class D)
Sizes: SM - 3XL
Colour Options:
IC-800Y > Yellow
Hi-Visibility 250DD Oxford / Polyurethane Coated
Breathable Outer with 3M Reflective Tape which complies to
AS/NZS 4602 Day/Night Use
Fully Waterproof Outer Shell with Sealed Seams
Concealed Hood
Fully Lined with Comfortable Lightweight Mesh Fabric
Two Extended Press Stud Hip Pockets
Concealed Mobile Phone Pocket
Heavy Duty YKK Nylon Zip • Press Stud Front Storm
Placket
Large Cuff Openings with Velcro Fastening
Neoprene Storm Cuffs
•
•
•
•
•
Same construction as Raincoat
Elasticated Waist for Easy Fit
Drawstring Fastening
Side Splits on the Bottom of Legs for Easy Dressing
Press Stud Fastening at Bottom of Legs
Sizes:
SM - 5XL
Colour Options:
IC-HV012Y > Hi-Vis Yellow
IC-HV016OR > Hi-Vis Orange
Page 7 |
Hi-Vis Freezerwear
thermGUARD Freezerwear
Freezer wear designed for the coldest conditions.
The thermal properties of this garment will protect the user
in temperatures as low as -20°C.
Full Freezer Suit
•
•
•
•
•
One Piece Nylon Suit complete with Zip-Off Hood
Polyester Fibre Insulated for all Cold Conditions
Double Thickness Nylon Reinforcements on Front and Arms
Full Front and Side Leg Zippers and Touch Tape for easy
dressing
Knitted Collar and Cuffs for Extra Comfort
Sizes: S - 4XL
Colour Options:
IC-WW300G > Bottle Green / Hi-Vis Yellow
Freezer Coat
•
•
•
•
•
•
Same construction as the Freezer Suit
Zip-Off Hood
Polyester Fibre Insulated for all Cold Conditions
Double Thickness Nylon Reinforcements on Front and Arms
Knitted Collar and Cuffs for Extra Comfort
Three Quarter Length for Extra Warmth
Sizes:
S - 4XL
Colour Options:
IC-WW100G > Bottle Green / Hi-Vis Yellow
Freezer Trousers
•
•
Same Construction as the Freezer Suit
Legs have Full Length Two Way Zips for easy dressing and undressing
Sizes:
S - 4XL
Colour Options:
IC-WW200G > Bottle Green
Page 8 |
Hats
Hard Hat
Brims
Hard Hat
Snap Brims
Straw Hay
with Hi-Vis
Hatband
To suit a wide range
of hard hats.
To suit a wide range of
hard hats.
Chin strap
Hi-Viz Hatband
Provides added
protection from the
dangers of the sun.
Provides added
protection from the
dangers of the sun.
Sizes:
With neck flap.
Sturdy, high quality
brims with fabric
edging.
Cricket
Hat
Chin strap
Sizes:
Easy to fit and
remove.
Colour Options:
U3019N>Navy Blue
U3019G>Green
U3019W>White
U3019O>Hi-Viz
Orange
Sold Individually
Hi visibility
Chin strap
S – XL
Sizes:
S – XL
Part No.
U3791N Navy
Part No.
U4261
Sold Individually
Sold Individually
Hi-Viz Sun
Hat
S – XL
Colour Options:
U3791Y> Hi-Vis Yellow
U3791OR> Hi-Vis
Orange
Sold Individually
With removable neck
flap – attaches with
velcro.
Easy to fit and remove.
Colour Options:
Navy Blue - Navy Flap
Green - Green Flap
White - Green Flap
Orange - Orange Flap
Part Nos.
SBSTTDWHT> White
SBSTTDNVY> Navy
SBSTTDORG> Orange
SBSTTDGRN> Green
SBCGDWT>MSA
Coolguard White
SBCGDORG>MSA
Coolguard Orange
SBADVWHT>MSA
Advanced White
SBADORG>MSA
Advanced Orange
SBHC600WHT>MSA
Protector White
SBHC600ORG>MSA
Protector Orange
Ask Us About Our
Wide Range of
Hard Hats
Sold Individually
Page 9 |
Disposable Clothing
Frontier
Disposable
Aprons
Disposable aprons
come in a perforated
pad of 100 with a PVC
header card.
Aprons are wall
mounted on an
aluminium bracket and
taken as required.
Header card holds in
place the remaining off
cut creating a cleaner
workplace.
Frontier
Disposable
Labcoat
Frontier
Coverall
Lightweight non woven
material
Disposable overalls
made from high density
polyethylene.
Breathable
Lightweight
Disposable
Breathable
Designed to protect
workers from
hazardous materials, or
sensitive products and
processes from
contamination by
people.
Elasticated hood,
wrists and ankles
Ideal for insulation,
demolition, asbestos,
food and mining
industry
Velcro fastening
No top pocket
Sizes: One size for all
Part No. F104 White
Quantity:
Carton Qty 50
Part No. F108 > Size
1350 x 810mm
Quantity:
Packing 500 per carton
Ideal for asbestos
removal, hazardous
material clean up,
paints and final finishing
of car components,
food production and
handling.
Blueshield
Disposable
Overalls
Zip front
Sizes:
S - XL
Part No. FME38 –
Light Blue
Quantity:
Carton Qty 25
Frontier
Disposable
Overall
Sizes:
L - XXXL
Part No.
PP1A – Navy Blue
HVPP1A – Hi Vis
Orange
Quantity:
Carton Qty 50
Sizes: SM - 3XL
Part No. CV001 White
Quantity:
Bag Qty 25
Carton Qty 100
Page 10 |
Frontier
Round Cap
Frontier
Medi Cap
Frontier
Beard Cover
Light weight nonwoven paper for
comfort, hygiene and
cleanliness
Light weight nonwoven paper for
comfort, hygiene and
cleanliness
Light weight nonwoven material
Facial hair cover for
hygiene reasons
Sizes:
Generous sizing
Sizes:
Generous sizing
Ear loops and single
loop type available
Colour Options:
F101W > White
F101B > Blue
Colour Options:
F1010W > White
F100B > Blue
Sizes:
Generous sizing
Quantity:
1000 per carton
Part No.
F107 > Double Loop
F107A > Single Loop
Quantity:
1000 per carton
Quantity:
500 per carton
Frontier
Non-Slip Shoe
Covers
Frontier
Shoe Covers
Ideal for in ‘clean room’
areas
Ideal for in ‘clean room’
areas
Excellent for dust
protection and splash
protection
Excellent for dust
protection and splash
protection
With non-slip pattern
for safety
Sealed-in elastic edge
for a secure fit
Sealed-in elastic edge
for a secure fit
Sizes:
One size fits all
Sizes:
One size fits all
Part No. F103
Part No. F102
Quantity:
1000 pairs per carton
Quantity:
500 pairs per carton
Frontier Arm Cover
Light weight Polyethylene (LDPE) for excellent
splash protection
Wrist to above elbow protection
Sealed-in elastic for a secure fit
Part No. F106
Quantity:
Packing 2000 pairs per carton
Page 11 |
Gloves
Chemical
Chemical
Chemical
Chemical
P821 Mercury
P822 Mercury
P2645 Neotech
P3854 Neogrip
330mm Nitrile Flocklined
460mm Nitrile Flocklined
Features
Solvent resistant
Antislip pattern for good wet
and dry grip
Antibacterial additives
Chlorine washed
Conforms to USDA Standards
for food contact
Conforms to CE Directive
89/109/EEC (Green colour)
Features
Solvent resistant
Sandpatch finish for good wet
and dry grip
Antibacterial additives
Chlorine washed
Conforms to USDA Standards
for food contact
89/109/EEC (Green colour)
Light Weight Supported
Neoprene Gloves with
Cotton Interlock Lining
Heavy Weight Supported
Neoprene Glove with
Insulated Lining
Features
Green on green construction
Sandy finish - double dipped
100% cotton interlock lining
Features
Multi-Dipped Construction
Etched Finish
Foam + Cotton Jersey Lining
89/686/EEC (En374, En388,
EN420:1994)
89/686/EEC (En374, En388,
EN420:1994)
Applications
Chemical Processing
Machining Tool Cleanup
Mining
Metal Finishing
HAZMAT Operations
De-greasing
Chemical Transport
Applications
Industrial cleaning
Petrochemical industry
Aerospace industry
Automobile industry
Printing industry
Surface coating
Metal fabrication
Pharmaceutical
Paint industry
Solvent / acid protection
Applications
Industrial cleaning
Aerospace industry
Automobile industry
Printing industry
Surface coating
Metal fabrication
Pharmaceutical
Paint industry
Solvent / acid protection
Applications
Chemicals
Light-medium fabrication
Durable goods assembly
General plant use
De-greasing operations
Laboratories
Petrochemical
Sizes:
Available in sizes 8 - 11
Sizes:
Available in size 11
Availability
12 Pairs per Packet / 60 Pairs
per Carton
Availability
per Carton
Sizes:
Available in Small - 2XL
Availability
12 Pairs per Packet / 144
Pairs per Carton
Sizes:
Available in M - XL
Availability
per Carton
Page 12 |
Chemical
Chemical
Chemical
Chemical
P3882 Neoprene Shoulder
P921 Frontier 75
P322 Conqueror ll
P227 Series PVC Single
Dip
Heavy Weight Supported
Neoprene Glove with
Insulated Lining
Neoprene Chemical Gloves
Neoprene and Rubber
Gloves
P227 27cm Length
P235 35cm Length
P245 45cm Length
P201 Knitwrist Open Back
P202A Knitwrist Full Dip
Features
Multi-Dipped Construction
Etched Finish
Shoulder Length
Foam + Cotton Jersey Lining
Applications
Chemical Processing
Machining Tool Cleanup
Mining
Metal Finishing
HAZMAT Operations
De-greasing
Chemical Transport
Sizes:
Available in size 11
Availability
per Carton
Features
Neoprene for chemical
resistance
Anti-slip pattern
Good wet and dry grip
300mm length
100% cotton flock lining
Applications
Industrial cleaning
Chemical industry
Aerospace industry
Automobile industry
Oil refining
Sizes:
Available in sizes M, X and XL
Availability
Pairs per Carton
Features
Neoprene over natural rubber
Palm strengthened by special
dip
Anti-slip pattern
Good wet and dry grip
100% cotton flock lining
Chlorinated for improved
chemical resistance
Compliant with FDA for use in
food contact
Sanitised with Actifresh
Applications
Laboratories
Industrial cleaning
Chemical processing
Chemical industry
Aerospace industry
Automobile industry
Electronics industry
Sizes:
Availability
Pairs per Carton
PVC Single Dip
Features
Single dipped PVC
construction
Smooth finish
Applications
Basic liquid protection
Parts cleaning
General plant use
Maintenance
Petrochemical
Forestry
Sizes:
Available in Large
Availability
P227, P235, P201, P202A - 12
pairs per packet / 120 pairs
per carton
P245 - 12 pairs per packet / 72
pairs per carton
Page 13 |
Chemical
Chemical
Chemical
Chemical
P327 Series PVC Double
Dip
P435 Powershield
P435B Powershield
BOA
P925 Breeze
P327 27cm Length
P335 35cm Length
P345 45cm Length
P3271 27cm 100% Cotton
Interlock Lining
PVC Coated Triple Dip
PVC Coated Triple Dip with
BOA Fleece Lining
Breathable PVC Gloves
Economical Double Dipped,
Sandy Finish PVC
Features
Double dipped PVC
construction
Sandy Finish
Available in 100% cotton
interlock and 100% cotton
jersey linings
Available 27 cm, 35 cm and 45
cm lengths
Features
Triple PVC coated sandy finish
Fine knit 100% cotton
seamless liner
Excellent flexibility, durability &
dexterity
Excellent protection against
oils & hydrocarbons
Resistant against acids &
chemicals
Anatomically formed
Antibacterial treatment
Applications
Utilities
Materials handling
Machine tool cleanup
Applications
Chemical industry
Oil & petroleum industries
Fishing
Food industry
Mechanical works
Mining
Agriculture
Public works
Sizes:
Available in size 9.5
Sizes:
Available in Large
Availability
P327, P3271 - 12 pairs per
packet / 120 pairs per carton
Availability
per Carton
Features
Triple PVC coated sandy finish
Fine knit 100% cotton
seamless liner
Remains flexible at -20
degrees C
Excellent flexibility, durability &
dexterity
Excellent protection against
oils & hydrocarbons
Resistant against acids &
chemicals
Anatomically formed
Antibacterial treatment
Applications
Commercial fishing
Frozen food industry
Cold weather construction
Cold weather utilities
Ski field operations
Agriculture
Features
Breathable PVC
Single dip
Textured finish
100% cotton lining
Actifresh
Applications
Furniture manufacturing
Small parts handling
Automotive assembly
Brick handling
Steel handling
Shipping & receiving
Maintenance
Construction
Sizes:
Available in Large
Availability
Pairs per Carton
Sizes:
Available in Large
Availability
per Carton
P335, P345 - 12 pairs per
packet / 72 pairs per carton
Page 14 |
Chemical
Contego
Contego
Cut Resistant
P431, P432 Ocean
Shield
P8174
P8174A Fingerless
P503 Dyneema® with
PU Coating
P431 Long
P432 Short
Clarino® Synthetic Leather
Gloves
Clarino® Synthetic Leather
Gloves
Seamless Machine Knit
Dyneema® Gloves with Black
PU Palm Coating
PVC Supported Gloves
Features
0.8mm Clarino® synthetic
leather
Neoprene padded reinforcement
Perforated fourchettes
Black nylon / lycra, foam back
Black neoprene knuckle bar
Elastic cuff
Velcro fastener
Features
0.8mm Clarino® synthetic
leather
Neoprene padded
reinforcement
Perforated fourchettes
Black nylon / lycra, foam back
Elastic cuff
Velcro fastener
Features
Granular finish PVC
Double dipped with PVC
granules
100% cotton interlocked
lining
Applications
Deep sea fishing
Fish processing
Handling bricks, timber
Pulp & paper
Refining
Degreasing
Waste management
Sizes:
Available in Large
Availability
Pairs per Carton
Applications
Automotive
Shipping
Power tools use
Rescue operations
General handling
Mining
Metal handling
Applications
Automotive
Shipping
Power tools use
Rescue operations
General handling
Aerospace
Sizes:
Available in sizes Small - 2XL
Sizes:
Availability
per Carton
Availability
per Carton
Features
Seamless 13 gauge
construction
Dyneema® & synthetic fibre
shell
Cut level 3 as per European
Standards
Shell colour: Ash
Breathable / lint free
Silicon free
Applications
Glass handling
Sheet metal operations
Automotive assembly
Injection molding operations
Electronic and engineering
works
Sizes:
Available in size XS - XXL
Availability
per Carton
Page 15 |
Cut Resistant
Cut Resistant
Cut Resistant
Cut Resistant
P503V Dyneema® with
PU Coating
P505 Dyneema® with
PU Coating
P505V Dyneema® with
PU Coating
P512, P516 Dyneema®
Sleeve
Dyneema® Gloves with
Black PU Palm Coating
Dyneema® Gloves with Gray
PU Palm Coating
Dyneema® Gloves with
Gray PU Palm Coating
P512 12 Inch Sleeve
P516 16 Inch Sleeve
Dyneema® Sleeve
Features
Seamless 13 gauge
construction
shell
Standards
Velcro wrist fastener
Shell colour: Ash
Silicon free
Features
Seamless 13 gauge
construction
shell
Standards
Shell colour: Ash
Silicon free
Features
Seamless 13 gauge
construction
shell
Velcro wrist fastener
Standards
Shell colour: Ash
Silicon free
Features
Seamless 13 gauge
construction
shell
Standards
Shell colour: Ash
Silicon free
Applications
Glass handling
Automotive assembly
works
Sizes:
Availability
per Carton
Applications
Glass handling
Automotive assembly
works
Sizes:
Availability
per Carton
Applications
Glass handling
Automotive assembly
works
Applications
Glass handling
Automotive assembly
works
Sizes:
Sizes:
Available in 12 inch and 16
inch
Availability
Pairs per Carton
Availability
Pairs per Carton
Page 16 |
Disposable
Disposable
Disposable
Disposable
P245PF , P300PF
Disposable Nitrile
P300GPF Disposable
Nitrile
P245GNE Nitripene
P912 EMT Nitrile
P245PF 245mm
P300PF 300mm
Industrial/Food Service
Grade Disposable Green
Nitrile Gloves
Blended Nitrile / Neoprene /
Latex Disposable Gloves
Nitrile Disposable Gloves
Grade Disposable Nitrile
Gloves
Features
Available in 245 & 300 mm
lengths
Beaded Cuffs
Powder free-chlorinated
Component materials comply
with all federal regulations for
food contact
Applications
Food processing
Painting
Assembly
Printing industry
Mail sorting
Inspection
Sizes:
Available in sizes XS - XXL
Features
300 mm length
Beaded Cuffs
Powder free-chlorinated
food contact
Applications
Food processing
Painting
Assembly
Printing industry
Mail sorting
Inspection
Sizes:
Availability
100 Pieces per Box / 10 Boxes
per Carton
Availability
100 Pieces per Box / 10 Boxes
per Carton
Features
Blended Nitrile, Neoprene &
Latex
245mm length
0.10mm palm thickness
(4 mil)
Textured palm
Powder free (chlorinated)
Beaded cuff
Ambidextrous
Features
Medical grade AQL 1.5
300mm length
0.30mm palm thickness (11
mil)
Textured palm
Conforms to Category 3 CE
Directive 89/686/EEC (Article
11B)
Applications
Domestic use
Food processing
Agriculture
Light assembly &
maintenance
Laboratories
Janitorial
Applications
Emergency medical use
Hospitals
Ambulance
Fire
Police
Local council
Government utilities
Schools
Sizes:
Available in sizes S - XL
Sizes:
Available in sizes XS - 2XL
Availability
100 pieces per box / 10 boxes
per carton
Availability
per carton
Page 17 |
Disposable
Disposable
Disposable
Disposable
P301 Chemotherapy
P4508 Food King
P203, P204 Disposable
Latex
P661B Blue Silverlined
Medical Grade Latex
Disposable Gloves
Unsupported Nitrile Gloves
P203 245mm
P204 300mm
Latex Silverlined Gloves
Features
300mm length
0.40mm palm thickness
(16 mil)
Textured palm
Glove interior powder free
(chlorinated)
Effective protection from
chemotherapeutic drugs
Applications
Medical centres
Hospitals
Sizes:
Available in sizes XS - 2X
Availability
per carton
Features
Contoured unsupported soft
nitrile
Resistant to mild solvents,
greases, oils & animal fats
Flock free
Anti slip pattern
Extra light weight
FDA compliant for repeated
contact with food
Applications
Poultry
Dairy farming
Catering
Fish processing
Pharmaceuticals
Cosmetics & perfume
preparation
Electronics
Laboratories
Sizes:
Availability
12 pairs per packet / 144 pairs
per carton
Grade Disposable Latex
Gloves
Features
245 mm length
Beaded Cuffs
USP Approved Powder for
easy donning
food contact
Applications
Food Processing
Painting
Assembly
Printing Industry
Veterinary
Pharmaceutical
Dental
Sizes:
Availability
100 Pieces per Box / 10
Boxes per Carton
Features
Flock free silver lining for
easy donning
Enhanced sensitivity and
dexterity
Anti-slip pattern for good wet
and dry grip
Anatomically shaped for
comfort
chemical resistance
Complies with FDA
regulations for use in
repeated contact with food
Applications
Domestic use
Food processing
Agriculture
Light assembly &
maintenance
Laboratories
Janitorial
Sizes:
Availability
12 pairs per packet / 144
pairs per carton
Page 18 |
Disposable
Disposable
General Purpose
Leather
General Purpose
Leather
P661P Pink Silverlined
P911 EMT Nitrile
P031B, P031BE
Classic Rigger Beige
P031Y, P031YE
Classic Rigger Gold
Medical Grade Latex
Disposable Gloves
Premium Cowhide Rigger
Glove
Features
Flock free silver lining for easy
donning
Enhanced sensitivity and
dexterity
Anti-slip pattern for good wet
and dry grip
Anatomically shaped for
comfort
chemical resistance
Features
300mm length
0.15mm palm thickness (6 mil)
Textured palm
Certified for use as Class 1
Medical devices as per
Directive 9/42/EEC
Features
A Grade beige cow grain
Keystone thumb
Insewn elastic
Colour binding for sizing
Outseam curved fingers
P031BE features an extended
cuff - 28cm length
P031B available in sizes
Small - XL
P031Y Rigger
P031YE Rigger Extended
Premium Cowhide Rigger
Glove
Applications
Domestic use
Food processing
Agriculture
Light assembly & maintenance
Laboratories
Janitorial
Applications
Emergency medical use
Hospitals
Ambulance
Fire
Police
Local council
Government utilities
Schools
Applications
Construction
Steel Handling
Cables and coupling
Assembly work
Maintenance
Rope handling
Applications
Construction
Steel Handling
Cables and coupling
Assembly work
Maintenance
Rope handling
Sizes:
Sizes:
Available in sizes XS - 2XL
Sizes:
P031BE available in XL
Availability
per carton
Availability
per carton
Availability
Pairs per Carton
Sizes:
P031Y available in sizes
Small - XL
P031YE available Med and
XL
Latex Silverlined Gloves
Features
A Grade beige cow grain
Keystone thumb
Insewn elastic
Colour binding for sizing
Outseam curved fingers
P031YE features an extended
cuff - 28cm length
Availability
Pairs per Carton
Page 19 |
General Purpose
Leather
General Purpose
Leather
General Purpose
Leather
General Purpose
Leather
P031S Swagman's
Rigger
P117 Cabretta
P040A Alaskan
P016 Polisher
Cowhide Pigskin Split Rigger
Glove
Premium White Leather
Gloves
Cowhide Split Freezer
Gloves
Leather Palmed Cow Split
Glove
Features
1.3mm A Grade cowgrain palm
Economical pigskin split back
Wing thumb
Insewn elastic
Features
1.1mm white side split cowgrain
3 finger 1 piece leather
Perforated back
Wing thumb
White thread
Self hemmed
Unlined
Features
A Grade brown sidesplit
cowgrain
Gunn cut wing thumb
Insewn elastic front and back
Reinforced palm and thumb
Self hemmed
Orange knit cuff
C200 thinsulate back lining +
8mm foam
C100 thinsulate palm lining +
4mm foam
Features
Chrome cow split leather
palm & knuckle bar
Reinforced palm & forefinger
Starched cuff
Jersey sock lining
Applications
Freezer work
Cool room work
Winter work
Ski field operations
Availability
Pairs per Carton
Applications
Construction
Timber Handling
Cables and coupling
General purpose
Maintenance
Rope handling
Sizes:
Available in Large
Availability
per Carton
Applications
Automotive finish
Paint shop finish
Fine touch metal operation
Inspection
Sizes:
Available in sizes Medium Large
Availability
per Carton
Applications
High quality general purpose
Sizes:
Available in Large
Sizes:
Available in XL
Availability
per Carton
Page 20 |
General Purpose
Leather
General Purpose
Leather
General Purpose
Leather
General Purpose
Leather
P082 Rancher
IP43 Leather Palm
Cotton Back
P060, P061, P062 Split
Leather
P031P Pigskin Rigger
Glove
Leather Palm Cotton Back
Glove
P060 Denim Back
P061 Candy Back
P062 Candy Back Economy
Pigskin Split Rigger Glove
Features
Natural cow split palm &
knuckle bar
Rubberised cuff
Yellow cotton drill back
Jersey sock lining
Features
Natural 3/4 cow split leather
1/4 natural cotton drill back
10cm canvas cuff
Unlined
Applications
High quality general purpose
Sizes:
Available in Large
Availability
per Carton
Applications
Glass Works
General Handling
Construction
Maintenance
Gloves
Features
Natural cow split leather palm
& knuckle bar
Jersey sock lining
Applications
General purpose
Sizes:
Available in Large
Sizes:
Available in Large
Availability
per Carton
Availability
Pairs per Carton
Features
A-B Grade pig skin palm &
back
Wing thumb
Insewn elastic
Economical rigger choice
Applications
Construction
Timber handling
General purpose
Sizes:
Available in Large
Availability
Pairs per Carton
Page 21 |
General Purpose
Leather
General Purpose
Leather
General Purpose
Leather
General Purpose
Leather
P1142 Reinforced
Pigskin
P030 M Welders
P032 Power Touch Tig
Welders
Reinforced Pigskin Glove
Flame Resistant Welding
Gloves - "The best welders
glove available in Australia"
Deer Split TIG Welders
Glove
Cowhide Split Lined
Welding Glove
Features
1mm gold deer split
Inseam clute back
Straight back
Natural split leather cuff
Features
40cm cowsplit
Gold half welts
Self hemmed
Full jersey sock lining
Applications
TIG welding
Applications
High heat work
Welding
Foundry work
Features
Pigskin split leather
Reinforced pigskin patch palm
Cotton drill back
Elastic strap on back
Starched cuff
Applications
Construction
Gardening
Transport
General purpose
Sizes:
Available in Large
Availability
per Carton
Features
Select shoulder split
DuPont Kevlar¨ thread
Tilted wing thumb
No gap full welts
Double in-sewn elastic
Yellow flame resistant jersey
lining
4mm foam socked lining
Black flame resistant drill cuff
lining
M-Weld side split leather
Applications
Smelter/tapping work
Welding
Foundry work
High heat work
Sizes:
Available in XL
Sizes:
Available in Large
Availability
Pairs per Carton
Colour Options
P035 Blue Welders
P036 Red Welders
P038 Black & Gold
P039 Left Handed Welders Green
Availability
per Carton
Availability
per Carton
Page 22 |
General Purpose
Leather
General Purpose
Synthetic
General Purpose
Synthetic
General Purpose
Synthetic
P850 Nomex Mig
P214 Redback
P159 Glass Gripper
P325A Resistor
Deer Grain MIG / TIG Welders
Glove
Seamless Nylon Machine
Knit Gloves with Light
Weight Crinkle Latex Coating
Latex Coated Cotton Shell
Latex Plaited Cotton Shell
Features
100% cotton jersey lining
Natural latex coated
100% cotton knit wrist
Knuckle coated open back
Crinkle finish
Features
7 gauge acrylic polyester
seamless liner
Laminated rubber palm
Excellent abrasion & puncture
resistance
Applications
Assembly
Gardening
Brickwork
Recycling
Glass
Sheet metal
Applications
Glass handling
Light fabrication
Bottling
General maintenance
Shipping and receiving
Brick handling
Waste management
Applications
Glass handling
Agriculture
General construction
Sheet metal handling
Recycling
Sizes:
Available in sizes S - 2XL
Sizes:
Available in XL
Availability
per Carton
Availability
Pairs per Carton
Features
1.6mm gold deer grain
DuPont Kevlar® thread
Nomex®/Panof back lining
Straight thumb
Deer grain reinforced thumb
crotch
150mm stiff sidesplit cuff
Drill cuff lining
Applications
MIG welding
TIG welding
Sizes:
Available in Large
Availability
per Carton
Features
15 gauge 100% nylon shell
Light weight crinkle finish
coating
Ergonomic design
Sizes:
Available in Large
Availability
Pairs per Carton
Page 23 |
General Purpose
Synthetic
General Purpose
Synthetic
General Purpose
Synthetic
General Purpose
Synthetic
P16830 Orange Ruffy
P7001, 7002 Nitrile Dip
P9931K Nitrile Kevlar
PT32A Smelter King
Supported Latex Gloves with
Crinkle Latex Coating and
Interlock Lining
P7001 Palm Coat
P7002 Full Coat
Kevlar® / Cotton Glove with
Nitrile coating
32 oz Flame Resistant
Terrycord
Economical Light Weight
Supported Nitrile with
Interlock Lining
Features
Heavy weight Nitrile dip
coating
100% DuPont Kevlar® palm
lining
Nitrile safety cuff
Features
32 oz 100% cotton terrycord
outer
6 oz jersey lining
10 oz high visibility heavy
duty lining
6 oz jersey lining inner cuff
Total flame retardant treated
Excellent cut resistance
EN407 Contact Heat &
Convective Heat
Level 3 Contact Heat (15
seconds @ 3500C)
Level 4 Convective Heat (15
seconds @ 3500C)
Features
Heavy orange crinkle latex
coating
food contact
30cm length
Insulated against cold
Applications
Commercial fishing/crabbing
Forestry
Canning operations
General construction
Oyster farmer processor
Refuse collection
Gardening
Sizes:
Availability
per Carton
Features
Textured nitrile finish
100% Cotton interlock lining
Available in Palm Coated and
Fully Coated versions
Applications
Light-medium fabrication
Durable goods assembly
General plant use
Refuse
Waste management
Timber handling
Sizes:
Available in sizes 7-10
Availability
per Carton
Applications
Glass handling
Sheet metal
Timber industry
Metal fabrication
Metal stamping
Recycling operations
Sizes:
Available in Large
Availability
Pairs per Carton
Applications
Pot rooms (aluminium)
Foundries
Molten metal splash
High heat areas
Sizes:
Available in Small & Large
Availability
Pairs per Carton
Page 24 |
General Purpose
Synthetic
General Purpose
Synthetic
General Purpose
Synthetic
General Purpose
Synthetic
P1313 Hot Mill
P440, P440A Lint Free
Nylon
P325 Cross Grip
P135 Grip n Glove
100% Cotton Hotmill
P440 Full Glove
P440A Fingerless Glove
Seamless Polyester
Machine Knit Gloves with
Criss Cross PVC Coating
High grip polycotton Glove
Features
Double nap outer layer palm &
back
32 oz 100% cotton drill
Reinforced knuckle bar
15cm canvas cuff
Applications
Glass manufacturing
Moderate high heat
applications
Foundries
Metal stamping
Automotive
Refining
Sizes:
Available in Large
Availability
per Carton
Lint Free Nylon Shell
Features
100% 13 gauge nylon
Lint free
Silicone free
Hemmed cuff
Reversible
Applications
Painting
Paint shops
Film processing
Electronics
Laboratory
Inspection
Sizes:
Available in XS - XL
Availability
per Carton
Features
7 gauge 100% polyester shell
Soft PVC formulation
Criss cross coating pattern
Standard shell colours:
orange, brown, yellow & white
Applications
Bottling industry
Glass handling
Materials handling
Fishing industry
Sizes:
Available in Large
Features
Seamless glove for wearer
comfort
7 gauge poly / cotton
Knitted cuff for snug fit
PVC grip coating
Reversible
Applications
General shipping & handling
Sizes:
Available in Large
Availability
Pairs per Carton
Availability
Pairs per Carton
Page 25 |
General Purpose
Synthetic
General Purpose
Synthetic
P700T Thermolite
P104L, P104M Cotton
Interlock
Thermolite Gloves
Features
Blue Seamless Thermolite
Shell offers insulation in cold
applications
food contact
Reversible
Applications
Food Processing
Cold Storage
Commercial Fishing
Construction
Utilities
Sizes:
Ninja
Specialty Leather
P4001, P4002 Ninja
P2150, P2150H Golden
Eagle
P104L Knitwrist Ladies
P104M Knitwrist Mens
P4001 Palm Coated
P4002 3/4 Coated
P2150 Golden Eagle
P2150H Winterlined
Cotton Interlock Gloves
Knit with HPT Coating
Premium Deergrain Rigger "The best feeling leather
glove available"
Features
100% cotton Interlock
Knitwrist
Available in Ladies or Mens
Applications
Janitorial
Food processing
Film processing
Laboratory
Finger print protection
Glove liners
Ultra light assembly
Availability
per carton
Availability
per Carton
Features
Seamless 15 gauge shell
100% Apparel Grade Nylon
Hydropellent Coating provides
superior gripping power in wet
and dry conditions
Lint free
Applications
Light Fabrication
Petrochemical Industry
Construction
Automobile Manufacturing
White Goods
Shipping, Handling
General Purpose
Sizes:
Availability
Pairs per Carton
Features
Gold deer grain
Curved fingers with perforated
fourchettes
Black nylon, lycra, foam back
Elastic cuff
Velcro fastener
Applications
Construction
Timber handling
Steel handling
Cables and coupling
Reo handling
Rope handling
Shipping and handling
General handling
Sizes:
Availability
per Carton
Page 26 |
Specialty Leather
Specialty Leather
Specialty Leather
Specialty Leather
P041 Foundry Chief
P4101 Smelter Chief
P037LV Long, P037SV
Short Extrication
P224, P225 Fire Pro
Premium Cowhide Split
Foundry Glove with Flap
Reinforced Premium
Cowhide Smelter Glove
P037LV Long
P037SV Short
P224 Cowhide Leather
P225 Cowhide Suede
Features
1.4mm select shoulder split
Reverse gunn cut
Straight thumb
Finger tip & palm patch
190mm cuff
Features
1.5mm side split leather
DuPont Kevlar¨ thread
Gold half welts
Reinforced palm, fingers and
back
Synthetic Leather
Extrication Glove
Cowhide Split Fire Fighting
Glove
Features
3M Greptile® finger tips for
tighter grip
Features
1.5mm cow grain
Flame and water resistant
(treated)
Applications
Foundry Work
High contact heat work
Smelters
Steel mills
Applications
Foundry work
Smelters
Steel mills
High contact heat work
Sizes:
Available in Large
Sizes:
Available in XL
Availability
per Carton
Availability
per Carton
Abrasion and puncture
resistant palm and fingers
Clarino® breathable synthetic
leather palm
DuPont Kevlar® thread
100% DuPont Kevlar® jersey
sock lining
Stretch Cordura nylon back
for wearer comfort
100% DuPont Kevlar® knit
wrist
Protective knuckle bar
Sewn with DuPont Kevlar®
thread for strength
Snug cuff designed to keep
out glass pieces
Porelle® waterproof
breathable barrier
Wing thumb
Applications
Emergency and rescue
services
Sizes:
Available in Short and Long in
sizes S - XL
Availability
Sold per Pair
F-shaped reinforced palm
Applications
Fire Fighting
Sizes:
Available in XL
Availability
per Carton
Page 27 |
Specialty Leather
Specialty Leather
Specialty Synthetic
Specialty Synthetic
P40123L, P40123M
Police
P40124 Bossman
P4003 Ninja X
Samurai P441
P40123L Ladies
P40123M Mens
Cowhide Water Resistant
Law Enforcement Gloves
Knit with HPT Coating
Knit with Bipolymer Coating
Ladies' and Men's Cowhide
Law Enforcement Gloves
Features
1mm water resistant black goat
grain
Spectra seamless lining
Black thread
Wing thumb
Insewn index finger
Insewn elastic back
Self hemmed
Features
100% Apparel Grade Nylon
Hydropellent Coating provides
and dry conditions
Lint free
Features
100% apparel grade nylon
Bipolymer coating provides
and dry conditions
Lint free
Applications
Light Fabrication
Petrochemical Industry
Construction
Automobile Manufacturing
White Goods
Shipping, Handling
General Purpose
Applications
Light fabrication
Construction
Automobile manufacturing
White goods
Shipping, handling
General purpose
Sizes:
Sizes:
Features
A Grade black cowgrain
Insewn bolten thumb
TR2 socked lining
3 points sewn back
Rolled hem
Button cuff fastener
Applications
Law enforcement
Corrections
Customs
Government
Retail
Sizes:
Available in sizes Small - XL
Availability
per Carton
Applications
Law enforcement
Corrections
Customs
Government
Sizes:
Available in sizes Small - XL
Availability
per Carton
Availability
Pairs per Carton
THIS IS JUST A SAMPLE OF OUR RANGE OF GLOVES
- SO IF YOU CAN’T SEE WHAT YOU WANT –
JUST ASK US
Page 28 |
Disposable Respirators
Nuisance Dustmask
P1 Dust/Mist Respirator
P1 Dust/Mist Valved
Respirator
P2 Falcon Deluxe
Welding Valved
Respirator
Industrial Quality
Disposable Respirator
Industrial Quality Disposable
Respirator
Industrial Quality
Respirator
•
•
•
•
•
•
Lightweight
Soft fibre
Clear vision
Maintenance free
Elastic headband
Adjustable nose bridge
allows snug fit to a
range of face shapes
and sizes
For non-toxic nuisance dusts
Part No. FR1000
Quantity:
Packing 50 per box,
1000 per carton
•
•
•
•
•
•
•
•
Lightweight disposable
respirator
Contour fit
Easy breathing/speaking
Clear vision
Maintenance free
Twin elastic headbands
Comfortable foam nose
seal
allows snug fit to a range
of face shapes and sizes
FASTFlow Valve
respirator
Contour fit
Clear vision
Maintenance free
Comfortable foam nose
seal
Part No. R-FR6710
Part No. R-FR6712
Quantity:
Packing 20 per box, 240 per
carton
Quantity:
carton
FASTFlow Valve
respirator
Individually hygienically
packed
Contour fit with full face seal
Clear vision
Maintenance free
range of face shapes and
sizes
Part No. R-FR4712
Quantity:
Packing 5 per box, 60 per carton
Page 29 |
P2 Grand Falcon Deluxe
Welding Valved Respirator
P1 Crossfold Valved
Respirator
P2 Crossfold Valved
Respirator
P2 Crossfold
Respirator
Respirator
Industrial Quality
Industrial Quality
Industrial Quality
FASTFlow Valve
Flame Retardant Outer
Individually hygienically packed
Contour fit with full face seal
Clear vision
Maintenance free
Adjustable nose bridge allows
snug fit to a range of face
shapes and sizes
Part No. R-FR4722
Quantity:
Packing 5 per box, 60 per carton
FASTFlow Valve
respirator
packed
Contour fit
Clear vision
Maintenance free
Full face seal
FASTFlow Valve
respirator
packed
Contour fit
Clear vision
Maintenance free
Full face seal
Part No. FR3712
Part No. FR3722
Quantity:
carton
Quantity:
carton
respirator
packed
Contour fit
Easy
breathing/speaking
Clear vision
Maintenance free
Twin elastic
headbands
Full face seal
range of face shapes
and sizes
Part No. FR3720
Quantity:
Packing 20 per box, 240
per carton
Page 30 |
Re-useable Respirators
Survivair 2000
Half Mask
Survivair Blue 1
Half Mask
Survivair 3000
Half Mask
Survivair 3000 Kits
Lightweight silicone
construction with an
impressive range of features
provides a comfortable userfriendly half mask.
The only half mask with a
speaking diaphragm. An
economical way to improve
communication in noisy
areas.
Economical half face mask
packed full with all the features
you expect in a quality
respirator.
Pre-packaged kits include
comfortable half mask and
filters to suit specific
applications.
Oversized inhalation ports
provide lower breathing
resistance.
Comfortable, pliable silicone
prevents oxidation and
elasticity loss.
Comfortable, pliable silicone
prevents oxidation and elasticity
loss.
Kit Contents Welders Kit 1 x
360000 series mask, 2 x P3
filters.
Comfortable, angled selfadjusting nose allows for
safety eyewear.
Yokeless head harness will
not interfere with filter
attachment.
Yokeless head harness will not
interfere with filter attachment.
Spray Painters Kit 1 x 360000
Series mask, 2 x A2 filters,
2 x P2 prefilters, 2 x retainers.
Yoke design for a snug
secure fit and reduced
facepiece slippage.
Speech diaphragm for
communication in noisy
work environments.
Optimal speech
communication without a
speaking diaphragm.
Replacement parts available
for significant cost savings.
Replacement parts available
for significant cost savings.
Applications:
Suits numerous applications.
Filters are available to
protect against various
contaminants.
Applications:
Suits numerous applications.
Filters are available to
protect against various
contaminants.
Sizes:
250000 Small
260000 Medium
270000 Large
Sizes:
210010 Small
220010 Medium
230010 Large
Facepiece skirt is covered by
a 5-year warranty.
Replacement parts available for
significant cost savings.
Applications:
Suits numerous applications
requiring respiratory protection
against various contaminants.
Sizes:
350000 Small
360000 Medium
370000 Large
Applications:
Suitable for Spray painting in
low level contaminated
environments and welding
applications
Sizes:
U351033 Spray Painters Kit
Small
U351034 Spray Painters Kit
Medium
U351035 S Spray Painters Kit
Large
U351036 Welders Kit Small
U351037 Welders Kit Medium
U351038 Welders Kit Large
Page 31 |
Survivair 4000
Full Facepiece
Survivair Opti-Fit Full
Facepiece
Survivair 4000
PAPR
OS100 Welders
Helmet
Full facepiece Air Purifying
Respirator provides workers
with an unobstructed wideangle view.
Offers the ultimate level of
performance in an affordably
priced full face respirator.
The Powered Air Purifying
Respirator (PAPR) provides
easier breathing, reducing
wearer fatigue.
Specially designed for
Welders the OS100 provides
ideal protection against metal
fumes and dusts.
Low cost PAPR-P3 filter
consolidates inventory and
reduces costs.
Includes Satellite helmet with
short air duct, face seal &
carry case.
Replaceable power cords,
blowers and batteries.
Blower unit delivers 170lpm of
air to the welding helmet.
Flame retardant hose and air
flow tester included.
Hard coating on outside of lens
protects against scratches.
Distortion free lens offers an
exceptional view.
Facepiece is pliable, elastic
and comfortable.
Lightweight construction
reduces stress on the head and
neck.
Large inhalation ports for lower
breathing resistance.
Comfortable, durable silicone
skirt.
Optional translucent nose cup
to reduce fogging.
Easy to maintain and service.
Battery’s automatic resetting
circuit protector requires no
fuses.
Nose cup is a standard feature
to prevent fogging.
Water resistant, contoured
battery pack fits wearer's hip.
Applications:
Suits numerous applications
requiring respiratory and face
protection against various
contaminants..
Applications:
Suits many different
applications such as asbestos
and lead abatement &
pharmaceutical
manufacturing.
Converts easily to a mask
mounted PAPR .
Applications:
Suits applications requiring
respiratory and face protection
against various contaminants.
Sizes:
410010 Small
420010 Standard
Sizes:
752000 Small
762000 Medium
772000 Large
Sizes:
520010 PAPR
520020 Blower Assembly
(mask mounted)
520030 Power Cord
520050 Waist Belt
520060 Battery Pack
520073-Aust Battery Charger
981177 Filter Shower Cap
108000 PAPR-P3 Filter
8 hour battery for all day use.
Audible & visual alarm
indicators for missing or
clogged filter.
Sizes:
4147-000 OS100 Complete
Kit
4148-000 OS100 Complete
Kit minus shade cartridge
4088-000 P2 replacement
filter
4153-000 blower unit
4160-000 Face Seal
4155-010 Charger
4155-008 Replacement 8
Hour Battery
Page 32 |
Supplied Air Respirators/Airvisors
Airvisor MV Refinishers
Spray Kit
Airvisor Industrial Kit
MV Airvisor Chemical
MV Paint Kit
Airvisor Spray Kit
SAR with additional spray gun
hose assembly and acetate
visor to provide protection
against chemical splashes.
SAR with polycarbonate visor
which provides high impact
resistance against flying
particles.
SAR with acetate visor which
provides protection against
chemical splashes.
Disposable face skirt cassette.
Disposable face skirt cassette.
Disposable face skirt
cassette.
SAR featuring a foam face
seal and acetate visor to
provide
protection against chemical
splashes.
Foam or flame retardant skirt
material available.
material available.
material available.
Waistbelt with tamper-proof
airflow regulator.
airflow regulator.
airflow regulator.
Lightweight construction
reduces stress on the head
and neck.
Additional spray gun hose
assembly.
Polycarbonate visor.
Clear acetate visor.
Acetate visor.
Part No.
DMAK-0203 Industrial Kit
Part No.
DMAK-0202 Chemical Kit
Part No.
AVK-0012 SPRAY KIT
Clear acetate visor.
Disposable face skirt
cassette.
Part No.
DMAK-0201 Refinishers Kit
At Cairns Safety and Industrial
Supplies, we are always updating
and adding to our product range,
so this Catalogue does not reflect
all our products.
If you can’t find what you need in
this catalogue, ask us and we will
endeavour to get the right
equipment to help you do the job
right first time.
Page 33 |
Eye Protection
A900 Attention Grabbing
Style
Fuse® Sporty Metal
Frame Safety Eyewear
Prevail ™ Wrap Around
Sports Design
Ignite ™ Sports
Styled Safety
Eyewear
Style at a great price.
Following the latest trends in
sunglass styles, this great
looking safety eyewear is sure to
get plenty of attention.
The Fuse® provides workers
with comfort, style and
protection.
The Prevail™ provides close to
the face protection whilst
providing workers with a
fashionable spec they will want
to wear.
The Ignite boasts “hot get
noticed” style with
maximum fit and comfort
to get workers fired up
about staying protected.
Popular sporty design which
encourages employee
compliance.
9-base polycarbonate
wrap-around lens for a
distortion free view.
Durable nylon frame with
universal nose bridge.
Bold temple style and light
weight design for all day
comfort. 180 degree field
of vision and close-to-theface protection.
Attractive, comfortable, sports
styling and a light weight
frame make this affordable
series a smart choice.
Sports styling with distortion free
180 degree field of vision.
Non slip rubber nose piece and
soft padded temple tips.
Affordably priced.
Technical Data
Weight: 21.2 grams.
Material: Polycarbonate.
Impact Protection: Medium.
Approvals: AS/NZS 1337, Lic
No: SMK 0797.
Suggested Applications:
Maintenance, light/heavy
manufacturing, transport,
construction, medical,
woodworking, etc.
Part No.
A900AN Black Clear Hard Coat
A901AN Black Clear Antifog
A902AN Black TSR Grey Hard
Coat
A903AN Black TSR Grey Anti
Fog
A904AN Black Silver Mirror
Hardcoat
Gunmetal coloured frame with
exceptional coverage.
Nickel free frame prevents
reactions in those sensitive to
nickel.
Hinge stoppers on temples
prevent temple tips from
touching lenses.
Soft adjustable nose bridge
for comfort and grip.
Includes adjustable break
away neck cord.
Technical Data
Weight: 25.5 grams.
Material: Polycarbonate lens
with metal frame.
Approvals: AS/NZS 1337,
Licence No: SMK 02742.
manufacturing, mining,
transport,
woodworking, etc.
Part No.
11150800AN Gun-Metal Grey
Clear Hard Coat
Grey Hard Coat
Silver Mirror
Includes adjustable break-away
neck cord.
Technical Data
Weight: 35 grams.
Material: Polycarbonate lens with
nylon frame.
Licence No: SMK 2209/1.
TM Certified Product
manufacturing, mining, transport,
woodworking, etc.
Part No.
763502 Black Clear Hard Coat
763562 Black Grey Hard Coat
762782 Black Light Mirror
762972 Black Silver Mirror
Soft adjustable nose
bridge for all day comfort.
Unisex design appeals to
a broad range of workers.
Includes adjustable break
away neck cord.
Technical Data
Weight: 26.6 grams.
Material: Polycarbonate
lens with nylon frame.
Impact Protection:
Medium. Approvals:
AS/NZS 1337, Licence No:
SMK 0797.
woodworking, etc.
Part No.
1017080AN Red//Silver Clear
Hard Coat
1017081AN Red/Silver Clear
Anti-Fog
1017082AN Red/Silver Grey
Hard Coat
1017083AN Red/Silver Grey
Anti-Fog
Page 34 |
Protégé ® Sporty
Floating Lens Design
Flex Seal ® Goggle
Indirect Vented Goggle
with Silicone Seal
MAXX PRO®
Strategy ® Lightweight
Flexible OTG Goggle
Combines sports-styling with
lightweight comfort. With the
Protégé® workers get the
protection they need with the
comfort and style they want.
The Flex Seal® offers the
ultimate when it comes to
individual fit, comfort and perfect
panoramic vision,
making the Flex Seal® the
goggle for today's workers.
The Maxx Pro® features a
sleek, futuristic design that
encourages employee
compliance.
The Strategy® Goggle delivers
both premium comfort and
maximum protection at an
affordable price.
Toric lens gives superior
optics & peripheral vision
for all day use.
Lightweight TPE body provides
exceptional comfort and snug fit.
Proprietary floating lens
design offers increased
flexibility in fit.
Secure wrap-around brow
expands to fit a wide range of
users.
Ultra lightweight design.
Soft temple tip pads provide a
secure fit.
Soft clear nose pads prevent
slipping.
Technical Data
Weight: 27.5 grams.
Material: Polycarbonate lens
with nylon frame.
woodworking, etc.
Part No.
1015366 Black/Orange Clear
Hard Coat
1015364 Black/Orange Clear
Anti-Fog
1015363 Black/Orange Grey
Hard Coat
1015353 Black/Orange Grey
Anti-Fog
Silicone stays supple and
comfortable even in extreme hot
or cold.
Very comfortable to wear for long
periods of time.
Personally adjustable frame for
individual fit.
Large wrap around, high quality
lens for clear, panoramic vision.
Can be worn over prescription
eyewear.
Technical Data
Weight: 110 grams.
Material: Polycarbonate lens,
silicone seal and
fabric strap. Impact Protection:
Medium Impact, Splash, Molten
Metal & Hot Solids. Approvals:
AS/NZS 1337, Licence No: SMK
2209.
Australian
Construction, General Industry,
Finishing, Painting, Laboratory
Environment, Welding (Shade 5).
Part No.
1011333AN Clear Anti Fog
1011382AN Grey – Grey Anti
Fog
1011384AN Shades 5 Shade 5
Anti Fog
Low profile design fits with
most hard hats & half face
respirators. Easy lens
replacement system
reduces cost.
Indirect vent system
channels air over the lens
minimising fogging.
Quick adjust fabric head
strap for a comfortable
secure fit.
Technical Data
Weight: 74 grams.
Material: Polycarbonate
lens, multi material face
seal and fabric strap.
Impact Protection: Medium
Impact & Splash
Resistance. Approvals:
AS/NZS 1337, Licence No:
SMK 2209.
Certified Product
Construction,
maintenance, building,
sanding, woodworking.
Closed vent or indirect vent with
foam for fine particle protection.
Optical perfected lens with
excellent peripheral vision.
Fits over most prescription
eyewear.
Permanently bonded anti-fog
lens.
Technical Data
Weight: 87 grams.
Material: Polycarbonate lens,
silicone seal
and fabric or neoprene strap.
Impact & Splash Resistance
Licence No: SMK 2209/1.
1016740
Construction, maintenance,
building, sanding, woodworking,
laboratory.
Part No.
1016740 Indirect vent with foam
fabric strap Grey Clear Anti Fog
1015520 No vent neoprene strap
Grey Clear Anti Fog
Part No.
1011072AN Blue/Grey Clear
Anti Fog
1011072GYAN Blue/Grey
Grey Anti Fog
1011070AN N/A Clear
Anti Fog
1011070GYAN N/A Grey
Anti Fog
Page 35 |
Bionic® Face Shield
Laser Eyewear
Revolutionary and designed
for rugged jobs, it’s tough
where it has to be, yet
extremely lightweight and
balanced for all day comfort.
Extended top of head & chin
protection & adjustable
headband. Dielectric design
will not conduct electricity.
Hard hat adaptor sold separately.
Compatible with MSA V Guard
Elite & Protector Tuff Master hard
hats. Shade 3 & Shade 5 visors
available for welding.
Easy lens replacement. Lenses
are interchangable between clear,
electric arc and shaded welding
visors, making the Bionic an
extremely versatile face shield.
Technical Data
Weight: 360 grams.
Material: ABS frame with
polycarbonate visor.
Impact Protection: High Impact &
Splash Protection.
Sanding, grinding,
woodworking, welding,
trimming, flash
grinding, laboratory.
Part No.
1011623 Bionic Face Shield &
Clear Uncoated Visor
1011624 Bionic Face Shield &
Clear Coated Visor
1011625 Clear Uncoated
Replacement Visor
1011627 Clear Coated
Replacement Visor
1011628 Shade 3 Uncoated
Replacement Visor
1011629 Shade 5 Uncoated
Replacement Visor
1015161 Bionic Hard Hat Adaptor
IPL Eyewear
Feather-weight frames with
unparalleled comfort and lens
technology protects the eyes
against IPL.
Soft elastomer browguard
cushions contact with the face.
Peripheral vision while offering
superior coverage.
Adjustable temple length and
lens inclination.
With 40 years of experience serving the laser community,
Sperian Protection is the worldwide leader in laser protective
eyewear, patient care products and specialty filters for
industrial, military, communications, medical and R&D
applications. Our frames are designed for comfort and style,
matched with world–renowned dyes to maximise visibility and
protection. As the leader in manufacturing and design of laser
and specialty filters, we bring you the best value and maximize
protection in all the products we produce.
Part No.
31-9623 LGF Green
31-9624 LGF Dark Green
31-80133 XC Green
31-80134 XC Dark Green
Wide range of frame styles to suit all applications.
Frame styles available to fit over RX eyewear.
Packaged in a hard case for easy care.
Technical Data
In order to make a recommendation on the type of lens suitable
to
your particular laser application, we will need to know the
following
information about the laser you require protection against:
* Laser Type
* Laser Wavelength (in nm)
* Mode of the Laser (Continuous Wave, Single Pulse or
Multiple Pulse)
* Laser Output (Watts)
* Total Exposure Time in Seconds (If known)
Page 36 |
Optrel ® Satellite
Optrel P450 Tribe™
Optrel ® OSC
Automatic Shade
Protection from 9-13
Optrel ® Galaxy
The Optrel® Satellite is
packed full of features and
embodies comfort and safety.
The 5-13 shade adjustment
function gives welders the
freedom to use different
materials and welding
processes, and make
adjustments according to
individual needs.
The Optrel® P450 Tribe™
welding helmet features all
the good looks, comfort and
versatility but is also a cost
effective welding option
boasting attitude and style.
The Optrel® OSC features a
quality 9-13 shade cartridge.
The large shade level knob
on the outside of the helmet
allows the shade level to be
changed easily without
removing the helmet even
when wearing gloves.
The versatile Optrel® Galaxy
High Impact is high velocity
impact approved and includes a
flip up adaptor with a shade 10
welding filter. Suits both welding
and grinding applications.
Variable shades 5-13 & rated
to High Impact.
Grind button stops lens
darkening for use in
grinding applications.
External controls eliminate
need to remove helmet
to adjust settings.
Dark to light delay switch select fast or slow.
Solar cells eliminate the need
for battery change.
2 Year Warranty on ADF filter.
Technical Data
Weight: 570 grams.
Impact Protection: High
Impact & IR UV Protection.
Approvals: AS/NZS 1337 &
1338.
Variable Shades 9-13 & rated
to Medium Impact.
Variable Shades 9-13.
Shade level adjustment knob
on outside of helmet.
Solar cells eliminate the need
for battery change.
Tribal design encompasses
attitude and style.
Solar cells eliminate the
need for battery change.
Shade level adjustment
knob on outside of helmet.
Dark to light delay switch select fast or slow.
2 Year Warranty on ADF filter.
Technical Data
Weight: 505 grams.
1338.
Part No.
1004-048 Optrel® P450
Tribe™
Part No.
100-150 Optrel® Satellite
2 Year Warranty on ADF
filter.
Technical Data
Weight: 485 grams.
1338.
Part No.
100-001 Optrel ® OSC
High Impact approved clear lens
removes the need to change
from your welding helmet to a
visor when grinding.
Can be converted to an auto
darkening helmet using
the Nova Shade Cartridge.
Passive Shade 10 welding filter
in flip up adaptor.
Adjustable headgear for
improved comfort and usability.
Full range of spare parts
available.
Technical Data
Weight: 490 grams.
Impact Protection: High Impact &
IR UV Protection. Approvals:
AS/NZS 1337: 1992.
Part No.
1000-571 Optrel® Galaxy High
Impact
5000-226 High Impact inside
Lens Pack of 5
5000-227 Front Cover Lens
Pack of 5
500-030 Inner Cover Lens Pack
of 5
Page 37 |
Hearing Protection
Single-Use shouldn’t mean single choice. Howard Leight offers a comprehensive choice of Single-Use earplugs that include the
comfort features your employees deserve, plus the highest SLC80 rating available. An economical and convenient choice for work
situations that demand a high degree of comfort, frequent changes or where hygiene presents a problem for re-use.
Max
Max Lite
Laser Lite
Matrix
Multimax
X-treme
300 Series
Max
Max Lite
Laser Lite
Max bell shape single-use earplug is the
world’s most used polyurethane earplug.
Max Lite provides comfort for smaller
profile workers in a low pressure foam
earplug. Ideal size for female workers.
Contoured T-shape for easy handling and
wear.
Vibrant colours make the
Laser Lite a highly visible
Earplug and allows at-aglance determination of
worker compliance.
Low pressure foam expands
gently for comfortable longterm wear.
Vibrant colours make protection visible
and fun. Self adjusting foam expands to
fit virtually every wearer. Contoured Tshape for easy handling and wear.
Bell shape delivers maximum comfort.
Improved design easier to insert, reduces
tendency to back out of the ear.
Smooth, soil-resistant skin
prevents dirt build-up. Corded
and uncorded versions available
with various dispensing options.
Part No.
LPF–1 uncorded, individual poly bag
LPF–30 polycord, individual polybag,
LPF–1-D uncorded,, LS-500A dispenser
refill
LPF–PD-4 uncorded plug depot 4 refills
LPF–LS4 uncorded LS-400A dispenser
refill
Part No.
LL–1 uncorded, individual poly bag
LL–30 polycord, individual polybag,
LL–1-D uncorded LS-500A disenser refill
LL–PD-4 uncorded plug depot 4 refills
LL–LS4 uncorded LS-400A dispenser
refill
Matrix
Multimax
X-treme
The Matrix no-roll foam plug provides
instant protection when properly inserted.
Patented no-roll design makes insertion
easy. Smooth outer skin and reduced
diameter provide long term comfort.
Delivers instant protection
upon proper insertion, no
need to wait for foam to
expand.
MultiMax features 2 sizes in 1 earplug to
reduce inventory and offer a size choice
without having to change plugs.
Brightly coloured tapered
earplug ensures compliance
and encourages 100% wear
time.
Part No.
MAX-1 uncorded, individual poly bag
MAX-30 polycord, individual polybag
MAX-1-D uncorded,, LS-500A dispenser
refill
MAX-PD-4 uncorded plug depot refill 4 X
450 pair
MAX-LS4 uncorded LS-400A Dispenser
refill
Uniform attenuation profile
blocks loud noise while voice frequencies
can be heard more naturally.
2 attenuation levels, Orange 18dB Class
3, Green 17dB Class 2.
Part No.
MTX-1-GRA green uncorded individual poly bag
MTX-1-ORA orange undorded, individual poly bag
MTX-30-GRA green polycord, individual poly bag
MTX-30-ORA orange polycord, individual poly bag
MTX-1-GR-DA green uncorded LS-500A
dispenser refill
MTX-1-OR-DA orange uncorded LS-500A
dispenser refill
MTX-GR-LS4A green uncorded LS-400A
dispenser refill
MTX-OR-LS4A ornage uncorded LS-400A
dispenser refill
Two sizes in one product improves
individual fit and simplifies inventory.
Smooth, soil resistant skin prevents dirt
build up. Self-adjusting foam expands to
fit virtually every wearer.
Part No.
MM–1 uncorded individual poly bag
MM–LS4 uncorded LS-400A dispenser
refill
Brightly coloured offering high visibility
and worker compliance. Smooth tapered
shape for easy insertion and removal.
Corded version helps to guard against
earplugs falling onto the floor
Conveniently sized hand dispensing
option for easy accessibility.
Wall dispenser unit allows a refillable
option for the whole work area.
Part No.
1006716 uncorded individual poly bag
1006717 polycord, individual poly bag
1006821 uncorded, 100 pair hand
dispenser
1006204 uncorded LS-400A dispenser
with 400 paid refill
1006188 uncorded, 200 paid wall
dispenser refill.
Page 38 |
300 Series
The 300 series earplug features a tapered
shape for easy insertion and a smooth
hygienic outer to eliminate
irritation.
LEIGHT™ SOURCE 500 PAIR
EARPLUG DISPENSER
LEIGHT™ SOURCE 400 PAIR
EARPLUG DISPENSER
Two sizes available to suit
the majority of workers –
small and large. Tapered
shape for easy insertion.
Smooth PVC-free hygienic outer surface.
Suited to applications where noise levels
are 100 to less than 105dB(A).
Part No.
1005073 large uncorded
1005074 small uncorded
1007192 10 PR large uncorded
1007193 10PR small uncorded
1000106 large polycord
1000107 small polycord
1005852 100PR large uncorded
1005850 100PR small uncorded
1006202 400PR large uncorded LS-400A
dispenser with refill
1006203 400PR small uncorded LS-400A
dispenser with refill
1006186 large uncorded bulk polybag
Bilsmat refill
1006187 small uncorded bulk polybag
Bilsomat refill
Earplug dispensers save time, waste and
space. LS-500A
Heavy duty anodised aluminum
construction withstands constant use.
Mount on wall for easy access.
Crank handle to dispense earplugs.
Ideal for large factories and process
industries that have a zero tolerance for
packaging waste.
Will suit: Matrix, Max, Max Lite and Laser
Lite in bulk refills.
Part No.
LS-500A 500 pair earplug dispenser
LS-400A Leight Source Dispenser, a new
versatile earplug dispenser.
Mounts to wall or stands as table top
dispenser with balanced footing.
Twist knob to dispense earplugs.
Handy catch tray for stray plugs.
Ideal for smaller workshops, or where one
or more dispensers are required.
Will suit: Max, Xtreme, Max Lite, Laser
Lite, MultiMax, 300 series and Matrix.
Part No.
LS-400A 400 pair earplug dispenser
The effects of noise and hearing impairment
Hearing is one of the most vital of the five senses. Hearing, combined with sight and speech, allows us to communicate with the
world around us. However, today’s environment contains many sounds our ears weren’t designed to withstand.
Loud and continuous noise can permanently damage our ears, and lead to partial or a reduced ability to communicate. Noise in the
work place can cause stress, discomfort and impair hearing. Noise also interferes with conversation and concentration, and can
reduce productivity.
Whether a noise is damaging depends on three factors: the sound pressure level, the duration of exposure and the sensitivity of the
individual.
The problem with noise induced hearing loss is that by the time someone realises their hearing is impaired, the damage has been
done and it is irreversible. Side effects of hearing loss include psychological difficulties such as annoyance and stress, and
physiological problems including headaches, nausea, muscle tension, fatigue and tinnitus. Tinnitus is a continuous high
pitched noise in the ears, a medical condition for which there is no treatment.
It is vital that every effort is made to encourage 100% wear time. This can be achieved through training and providing suitable
hearing protection that is comfortable enough to wear all day.
Page 39 |
Quiet ™ Multiple-Use
Earplugs
Airsoft ™ Multiple-Use
Earplugs
Smartfit Earplug
Smartfit Process
Industry Earplug
Easy handling and a better fit
with a patented “no-roll”
design.
One of the original Howard
Leight products, the AirSoft is
an industry standard in reuseable hearing protection.
Conforming Material
Technology adapts the plug to
the contours of the ear canal
for exceptional comfort and
longer wear time.
Exceptional comfort and
longer wear time, plus a cotton
cord for use in the pulp and
paper industry.
Bell shape comfortably
matches contours of the ear
canal.
Built-in insertion stem for easy
fitting.
Patented “no-roll” design
makes it easy to handle and
fit.
Part No.
QD-1 uncorded, flip top box
QD-30 polycord, flip top box
Patented internal air cushion.
Maintains superior comfort
during extended wear.
Moulded design for multiple
usage.
Available uncorded, corded,
red vinyl cord and white nylon
cord.
Part No.
AS-1 uncorded, safety impact
case
AS-30R polycord safety impact
case
DPAS-30R red vinyl cord, flip
top box
DPAS-30W white nylon cord,
flip top box
Material adapts to the ear
canal for comfort and longer
usage.
Easy insertion and removal.
High visibility for compliance
checks.
One size will fit most users.
Protective case for long term
use.
Easy to clean using soap and
water.
Part No.
SMF-30A Smartfit
Cotton cord for use in the
pulp/paper industries.
Conforming Material
Technology adapts to the
contours of the ear canal for
exceptional comfort and wear
time.
Flat Fin Sealmaximises
comfort through more contact
inside the ear canal.
Paper packaging which is
100% recyclable
Part No.
SMF-30W-PA Smartfit
Process Industry
Fusion Earplug
Patented quadruple SoftFlange™ design adjusts perfectly to the ear canal for great
comfort and superior attenuation.
FlexiFirm core for easy insertion.
Design provides unmatched comfort and high attenuation.
Two sizes, regular and small.
Modern styling and design.
Hygienic materials, easy to clean and re-use.
Part No.
FUS30-HPA Regular Size
FUS30S-HPA Small
Page 40 |
Laser-Trak™ SingleUse Detectable
XD3™ Single-Use
Detectable Earplug
Smartfit™ Multiple-Use
Detectable Earplug
Fusion™ Multiple-Use
Detectable Earplug
The Laser-Trak provides
detectability in a single-use
earplug.
The XD3 provides full
detectability in a single-use
earplug.
The Smart Fit fully detectable
and visual detectable plugs
are a revolution in personal fit.
Total protection, comfort and
fit in a Multiple-Use, detectable
earplug, the Fusion offers two
sizes to ensure the perfect fit.
Self adjusting foam expands to
fit virtually any wearer.
l Self adjusting foam expands
to fit virtually any wearer.
l Non-ferrous metal and blue
colours are easily detected by
visual
and automated inspections.
l Metalized cord offers
additional protection in highly
sensitive production areas.
Simplifies inventory control – a
single product fits almost every
wearer.
Earplug
Non-ferrous metal and bright
colours are easily detected by
visual and automated
inspections.
Blue polycord prevents
earplugs from falling into
sensitive production lines.
Part No.
LT-30 Polycord, Individual
Poly Bag
Part No.
1007349 Metalized Cord,
Individual Poly Bag
Blue colour for high detection
visibility.
Detectable stem ring and
metalized cord is detectable by
automated equipment. (SDT30A only).
Delivers superior comfort and
fit.
Multiple use, can be used for
weeks.
Part No.
SDT-30A Detectable Poly Bag
SMF-30BUA Blue Poly Bag
Metalised cord and shaft ring
easily detected by automated
equipment.
Patented dual material design.
FlexiFirm® core for easy
handling.
Soft Flanges for comfort and
fit.
Cleans easily with mild soapy
water.
Multiple use, can be used for
weeks.
Part No.
FDT-30-SMA Small attached
metalized cord, hearpack
FDT-30A Regular attached
metalized cord, hearpack
Page 41 |
QB1™ Banded
Earplugs
Percap ™ Banded
Earplugs
Leighting® CapMounted Earmuffs
Leightning® Special
Application Earmuffs
For Inner-aural protection the
QB1 has smooth, ergonomic
pads which fit in the ear for
maximum protection
A comfortable folding hearing
protector that seals the
opening of the ear canal
without having to be inserted.
Leightning® cap-mounted
earmuffs offer a solution to
workers who need to wear
hearing protection with hard
hats.
Leightning special applications
styles offer flexibility to use
one earmuff for different
applications.
Patented band design
prevents ear pads from
touching contaminated
surfaces.
3 wearing positions over the
head, under the chin and
behind the neck.
Special Features
Can be used with a wide range
of popular hard hats.
Special Features
an be used with a variety of
face shields, hard hats and
other PPE.
Exchangeable foam caps.
Smooth, ergonomic pads fit
into the ear for maximum
comfort.
Lightweight at only 10 grams.
Lightweight and portable.
Fits into a pocket when not
needed.
Available with replacement ear
pieces.
Non intrusive for sensitive
ears.
Part No.
QB1 Banded Inner Aural
Resealable Bag
QB100 Replacement Foam
QB1 Individual Poly Bag
Part No.
1000276 Banded Semi-Aural
Resealable Bag
1000277 Replacement Foam
Individual Poly Bag
The earcups lock in place
during use and can rotate back
to park.
Air Flow control provides
better consistent attenuation.
Snap-in ear cushions makes
replacement quick and easy.
Steel wire provides a robust
construction to withstand
demanding use.
Telescoping height adjustment
remains fixed during use.
Part No.
1012536 L1H Cap-Mounted
28dB 1012537 L2H CapMounted 29dB
Folding design for convenient
easy storage and transport.
Telescoping height adjustment
remains fixed during use.
Steel wire provides a robust
construction to withstand
demanding use.
Hi-visibility earmuff for
increased visibility and safety.
Part No.
1011995 L2N Neckland 31dB
1011997 L2F Folding 30dB
1011994 L1N Neckband 30dB
1013942 L2F Hi-Visibility 30dB
Page 42 |
Thunder® Over-Head
Earmuffs
Mach™ 1 Earmuff
Viking® V1 Earmuff
Viking® V3 Earmuff
Thunder® combines a
dielectric earmuff with all day
comfort.
Mach 1 is a lightweight general
purpose, over-head earmuff.
The lightweight Viking® V1 is
a low profile three-position
earmuff, allowing maximum
wearer flexibility.
The Viking® V3 is a broad
profile three-position earmuff,
providing maximum wearing
flexibility.
Special Features
Non deforming 3-position
headband allows the worker to
select a position to best suit
their working application, and
allows use of other PPE
equipment including hard hats,
respirators and visors.
Special Features
Non-deforming headband
withstands rough treatment.
Special Features
Inner-ventilated headband (T2
& T3) minimises pressure on
the head.
Air Flow control provides
better consistent attenuation.
Dielectric construction does
not conduct electricity.
All day comfort with broad ear
cushions improving wearer
comfort.
Special Features
Economical design provides
adequate protection at low
cost.
Extremely lightweight
construction provides comfort
for intermittent and long term
wearers.
Dielectric design safe for all
workplaces, especially
electrical environments.
Part No.
1010421 Mach 1 Earmuff
Snap-in ear cushions make
and easy storage and
transport
Dielectric construction - does
Headband strap improves
comfort and fit when worn
BTN or UTC.
Part No.
1010925 V1 Earmuff
Quick replacement snap-in ear
cushions.
Inner-ventilated headband for
a soft and comfortable contact
surface.
Headband strap improves
comfort and fit when worn BTN
or UTC.
3-position headband allows
easy use with other PPE.
Part No.
1011170 V3 Eermuff
Part No.
1010928 T1 Over-Head 29dB
1011600 T1F Folding 30dB
.
Page 43 |
Clarity® Cap-Mounted
Earmuffs
Clarity® Over-Head
Earmuffs
Impact™ Earmuffs
Electo Radio Earmuff
Clarity® features two cap
mounted earmuffs for use with
a wide range of hard hats.
Clarity® over-head earmuffs
provide enhanced
communication and a choice
of cup profiles.
Amplifying hearing protector
enhances verbal
communication in varyingnoise and powerful impulsesound environments.
A hearing protector combining
sound amplification, AM/FM
radio and hearing protection –
all in one earmuff.
Special Features
Can be used with a wide range
of popular hard hats.
Sound management
technology provides uniform
attenuation.
The earcups lock in place
during use and can rotate back
to park.
Broad ear cushions and
spacious earcups provide
maximum comfort.
Part No.
1011242 C1H Cap-Mounted
24dB
1011243 C3H CapMounted 27dB
Special Features
Sound management
technology provides uniform
attenuation.
Natural listening without
distortion preventing worker
isolation.
Snap in ear cushions make
and easy storage and
transport.
Quick-Click height adjustment
for individual comfort settings.
Part No.
1011142 C1 Over-Head 23dB
1011145 C2 3-Position 26dB
1011146 C3 Over-Head 28dB
1011143 C1F Folding 24dB
Special Features
Sound level limitation where
amplification doesn’t exceed
82dB.
Water resistant stereo
speakers assist wearer in
determining noise direction.
Ideal for people with hearing
impairment.
Special Features
High quality AM/FM reception
lets workers listen to music.
Superb amplification enhances
verbal communication
with directional microphones.
Amplification is regulated with
separate volume controls for
greater flexibility.
Long battery life (approx. 700
hrs) with auto shut-off.
Cap-mount can be used with a
wide range of popular hard
hats.
Sound amplification enhances
user awareness of
environment.
Part No.
1010374 Over-Head
1010631 Cap-Mounted
Part No.
1010376 Over-Head
1010632 Cap-Mounted
Page 44 |
Hygiene Kits
Original Series Hygiene Hard Hat Adaptors
Kits
Hygiene Kits assist in
extending the performance
and lifetime of the earmuff.
The original series hygiene kits
are recommended to be
replaced every six months.
Part No.
1011998 Hygiene Kit
L1/L1H/L1N
1011999 Hygiene Kit
L2/L2H/L2N/L2F
1012000 Hygiene Kit L3
1010974 Hygiene Kit
T1/T1H/T1F
1010975 Hygiene Kit T2/T2H
1010976 Hygiene Kit T3/T3H
1006018 Hygiene Kit V1, Blue
Comfort
1010977 Hygiene Kit V2
1010978 Hygiene Kit V3
1006080 Hygiene Kit
C1/C1H/C1F/815/817/818
Metallic
1006017 Hygiene Kit C2/ 822
Metalic
1006081 Hygiene Kit
C3/C3H/847/848 Metallic
Part No.
2307 Hygiene Kit Loton 2401
2310 Hygiene Kit Compact
2470
2312 Hygiene Kit Viking 2421
2741 Hygiene Kit 727/ 728
2742 Hygiene Kit 707/ 708/
777/ 778/ 788/ 797/ 798/ 799
2743 Hygiene Kit 717/ 718
2744 Hygiene Kit 737
Part No.
1000240 Adaptor 3702
Universal
1000244 Adaptor 3713
Alsafe/Norton/NZ Safety
1000245 Adaptor 3714
Protector/CIG/Unisafe
1000249 Adaptor 3718 MSA
Cool Pads & Belt
Pouch
Cool Pads
Sweat absorbing earmuff
pad for increased comfort
in hot & humid conditions.
Belt Pouch
Convenient hygienic storage
for folding earmuffs with velcro
closure.
Part No.
1000251 Belt Pouch 3740
13910033 Belt Clip 3741
13910032 Cool II Absorbent
Pads - 5 PR
Pouch 3456
13910031 Cool II Absorbent
Pads - 100 PR DISP 3455
uvex-XV – Glow in the Dark Ear Muffs
ear muff cups glow in the dark after light exposure
light reflecting head band, especially in low light environments of wherever high visibility
PPE is required
uvex ultra soft cushion technology
high quality stainless steel head band system for easy adjustment and indisvidual fit
high wearer comfort due to low clamping force of 10.1 Newtons
AS/ NZS 1270 approved
SLC80 rating: 37dB, class 5
foldable ear muff for easy storage
light weight - 225g
Part No. P/N: uvex-XV
Page 45 |
PVC Footwear
Inyati Black Safety
Gumboot with Midsole
Inyati Black Safety
Gumboot
Inyati Ladies White
Non-Safety Gumboot
Inyati 3C Dual Density
Extra Heavy Duty Green
Non-Safety
Inyati Steel toe cap & Steel
midsole 400mm PVC / Nitrile
Gumboot
Inyati steel toe cap 400mm
PVC / Nitrile gumboot
PVC / Nitrile sole is resistant
to fats, acids, oils, solvents
and many chemicals.
The latest technology allows for
the injection of super soft
PVC/Nitrile midsole.
Specially designed cleated
sole for high slip resistance,
maximum water dispersion
and soil release.
This makes the boot up to 18%
lighter than comparable styles
and absorbs shock, making the
boot more comfortable and less
tiring when worn for extended
periods.
Made to AS2210
specifications meeting
stringent demand for safety
and durability under all
conditions
PVC/Nitrile sole is resistant to
fats, acids, oils, solvents and
many chemicals
and soil release
Sizes:
4 to 13
Part No.
W1323 Black/Red
PVC / Nitrile sole is resistant
to fats, acids, oils, solvents
and many chemicals
and soil release
Sizes:
4 to 8
Meets the following Australian
Standards: AS/NZS 2210
Part No.
W1689 White
Sizes:
4 to 13
Quantity:
10 pairs per carton
Part No.
W1315 Black/Yellow
Quantity:
6 pairs per carton
Quantity:
6 pairs per carton
Soling and upper is PVC/Nitrile
blend to achieve maximum
resistance to fats, acids, oils,
solvents and chemicals.
Made to AS2210.2
specifications.
Sizes:
5 to 14
Part No.
F2802 Green
F2802 White
Quantity:
6 pairs per carton
Page 46 |
Workplace Safety Signs
Cairns Safety and Industrial Supplies offer a huge range of industrial and
safety signs for the workplace.
Admittance Safety Signs
A-Frame Barricade Stands & Safety Signs
Anti Slip Floor Markers
Asbestos Warning Safety Signs
Battery Charging Safety Signs
Building Site Safety Signs
Confined Space Safety Signs
CPR Safety Signs
Cylinder Status Tags
Danger Safety Signs
Fire & Emergency Safety Signs
No Smoking Safety Signs
Door Exit/Directional Safety Signs
Electrical Hazard Warning Safety Signs
Emergency Information Safety Signs
Exit & Evacuation Safety Signs
Fall/Trip Hazard Safety Signs
Fire Safety Signs
First Aid Emergency Information Safety Signs
Forklift Safety Signs
Forklift Safety Labels
Flammable Material Safety Signs
Glow In The Dark Safety Signs
Hazardous Materials Placards
Hazardous Substance Safety Signs
Injury Avoidance Safety Signs
Loading Dock & Warehouse Safety Signs
Lockout Safety Signs & Labels
Manual Handling Safety Signs
Machinery & Operational Safety Signs
Maintenance Work Safety Signs
Mandatory Safety Signs
Mining Safety Signs
No Mobile Phone Safety Signs
No Smoking Safety Signs
No Standing Safety Signs
Overhead Safety Signs
Oversize Truck Safety Signs
Parking Safety Signs
Personal Protection Safety Signs
PPE Tool Tags
Receiving Safety Signs
Dispatch Safety Signs
Safety Hard Hat Labels
Scaffolding Safety Signs
Spill Kit Safety Signs
Truck Safety Signs
Tripod Sign Stands
Page 47 |
Page 48 |
Workplace Drug and Alcohol Testing Devices
Cairns Safety and Industrial Supplies offers the following Drug and
Alcohol Testing Devices that can be used in the workplace:Product Detail
Minimum
Quantity
The DrugCheck® NxStep Onsite Test Cup
•
•
•
•
Complying with AS/NZS 4308:2008
Expiry: 12-16 mths
This fully integrated cup test offers reliable
results in just a few minutes.
It comes with a re-sealable lid and a wider
“female-friendly” opening.
Boxes of 25
Carton of 200
The Express Check™ Oral Fluid
Drug Test
•
•
This is a fast, reliable lateral flow
chromatographic immunoassay for
the qualitative detection of 6 drug
classes and their metabolites in
human oral fluids.
The drugs/metabolites are detected
at or above the following
concentrations (ng/mL): AMP 50,
BZO 50, COC 20, METH 50, OPI 40, THC 12.
Boxes of 25
Breathalyser – AlcoMate Prestige
AlcoMate Prestige is an affordable, reliable
breath alcohol tester with 2
decimal points accuracy. It is ideal for personal
use or professional use. AlcoMate Prestige
comes with an
innovative and patent pending
technology that allows users to
recalibrate their own breathalyser
by simply inserting a new calibration
module.
AlcoMate Prestige Mouthpieces
Single Unit
Bag of 50
Alcohol Breathscan – ExpressCheck
Breathscan - The Express Check™ Breath
Alcohol Test offers users a simple, convenient
method to detect alcohol use and to estimate
levels of alcohol intoxication. The Express
Check™ Breath Alcohol Test uses chemical
alcohol detection technology with 50 years of
proven success in law enforcement and
corrections.
Boxes of 25
Page 49 |

PPE, Workplace Signs and Drug Testing Catalogue (4mb pdf)

Transcription

Similar documents

Dimensional stability density

Community Christian School

開啟原PDF - Mipaper

ho soccer - mtsport.it

Product Catalogue 2014 EU LR

COINS: (2) 1981 South African Krugerrands ~ 1997 $50 Walking

Lyreco Hygiene Overview Catalogue

the PDF

Evolution is the

TechMAP Sample

1995 approved.

Master thesis – Louis Vuitton

American Leather V5 Comfort Sleeper Disassembly Instructions

and read – pdf - London Fashion Week: The Daily

PDF Format