Surface Bolts - Frank Allart

Shield Logo device only to support main logo in a secondary location
or watermark
®
Door Bolts
Surface Bolts
The 0445 Knob Slide Surface
Mounted Door Bolt comes with
a spring loaded stop button, is
offered in several lengths and with
a Cranked Shoot option.
The 0454 Lever Action Surface
Mounted Door Bolt design
features a shallow overall
projection of just 22mm and is
available in two lengths.
0445 shown with staple option (ST)
19
shoot size 13 x 13
length of throw 25
projection 47
Bolt Body Fixing Positions (FP)
Ø19
42
Chamfered
shoot end
L
A
B
C
D
E
F
L (length)
203
305
381
457
610
914
FP (no.)
4
4
4
6
6
6
custom lengths upon request
(203mm minimum)
(*) cranked shoot available on size C and above
0454 shown with staple option (ST)
Fixings
Bolt Bodies & Staples (ST) supplied
with finish matched no.8 x 25mm wood
screws.
FP, AP & UP supplied with finish
matched no.6 x 19mm wood screws.
shoot size 16 x 13
length of throw 16
projection 22
A
6 x Bolt Fixing Positions (both lengths)
22
47
B
L (length) 229
305
type 1 supplied
L
type 1 supplied
FP
Flat Strike Plate
type 1 supplied
AP
UP
Angle Strike Plate
CK cranked
version
(0445 only*)
Universal Strike Plate
see pages DB4:020 & 021 to order Strikes & Staples separately if required
25
50
1.6
© Frank Allart & Company 2015
25
aperture
18 x 15
apertures
18 x 15
50
32
33
1.6
151
4
1
3
3
1
4
3
2
4
2
3
UPDATED
06/15
DB1:010
2
Shield Logo device only to support main logo in a secondary location
or watermark
®
Door Bolts
Surface Bolts
Two Surface Mounted Door Bolts
incorporating a concealed spring
loaded mechanism to hold the bolt
shoot in the thrown & retracted
positions. Available in various lengths
offered with a locking option featuring
a finish matched non-removable
Locking Cap, a Cranked Shoot
version, and the option of a fully
retractable Extended Throw.
6481 shown with staple option (ST)
type 2 supplied
type 2 supplied
FP
LK (size A & above)
lockable version with
nickel plated key
type 2 supplied
AP
Flat Strike Plate
UP
Angle Strike Plate
Universal Strike Plate
CK
cranked version (*)
see pages DB4:020 & 021 to order Strikes & Staples separately if required
Bolt Body Fixing Positions (FP)
Chamfered
shoot end
Lock Position (all lengths)
75
25
shoot size 14 x 8
length of throw 25
(extended throw
available - see notes)
projection 39
Ø30
43
L
AA
A
B
C
D
E
F
L (length)
100
150
200
250
300
450
600
FP (no.)
4
4
6
6
6
8
8
custom lengths
upon request
(100mm minimum)
(*) cranked shoot available on size C and above
Fixings
6481 Bolt Body & Staple (ST) supplied with
finish matched no.8 x 25mm wood screws.
6473 Bolt Body & Staple supplied with finish
matched no.6 x 25mm wood screws.
FP’s, AP’s & UP’s supplied with finish
matched no.6 x 19mm wood screws.
6473 shown with staple option (ST)
type 3 supplied
lockable version with
nickel plated key
type 3 supplied
FP
LK (size B & above)
Flat Strike Plate
type 3 supplied
AP
UP
Angle Strike Plate
CK
cranked
version (*)
Universal Strike Plate
see pages DB4:020 & 021 to order Strikes & Staples separately if required
Bolt Body Fixing Positions (FP)
Chamfered
shoot end
© Frank Allart & Company 2015
shoot size 10 x 10
length of throw 20
(extended throw
available - see notes)
projection 28
Lock Position (all lengths)
103
20
Ø20
34
L
A
B
C
L (length)
100
150
200
FP (no.)
4
6
6
custom lengths
upon request
(100mm minimum)
(*) cranked shoot available on size C and above
UPDATED
06/15
DB1:020
Shield Logo device only to support main logo in a secondary location
or watermark
®
Door Bolts
Skeleton Bolts
Two Surface Mounted Skeleton
Door Bolts incorporating
a concealed spring loaded
mechanism to hold the bolt
shoot in the thrown & retracted
positions, both offered in several
lengths, and both available with
the option of a Cranked Shoot.
The 6507 complements the
0807 type Cremone Bolt and the
6536 complements the 0836 &
0846 types (see section DB3).
Extra guides supplied on lengths 450mm and above
6507 shown with staple option (ST)
L (shoot length)
20
shoot size 14 x 8
length of throw 20
projection 39
Ø30
43
20
Chamfered
shoot end
L
A
B
120
150
C
D
E
F
G
200
250
300
450
600
custom lengths
upon request
(120mm minimum)
(*) cranked shoot available on size C and above
Extra guides supplied on lengths 450mm and above
6536 LH shown with staple option (ST)
Fixings
L (shoot length)
20
shoot size 14 x 8
length of throw 20
projection 39
Bolt Bodies & Staples (ST) supplied with
finish matched no.8 x 25mm wood screws.
FP, AP & UP supplied with finish
matched no.6 x 19mm wood screws.
Ø30
43
32
LH version
30
Chamfered
shoot end
L
A
B
C
D
E
F
G
120
150
200
250
300
450
600
custom lengths
upon request
(120mm minimum)
(*) cranked shoot available on size C and above
type 2 supplied
type 2 supplied
FP
type 2 supplied
AP
Flat Strike Plate
UP
Angle Strike Plate
CK cranked
version (*)
Universal Strike Plate
see pages DB4:020 & 021 to order Strikes & Staples separately if required
18
19
aperture
18 x 9
50
1
32
1.6
1.6
© Frank Allart & Company 2015
apertures
18 x 9
50
1
3
4
115
4
2
4
3
33
3
3
2
2
UPDATED
06/15
DB1:030
Shield Logo device only to support main logo in a secondary location
or watermark
®
Door Bolts
Skeleton Bolts
Three Surface Mounted Skeleton
Door Bolts incorporating a concealed
spring loaded mechanism to hold the
bolt shoot in the thrown & retracted
positions, both offered in several
lengths, and both available with the
option of a Cranked Shoot.
The 6510 and 6511 complement the
0810 type Cremone Bolt and the
6522 complements the 0822 type
(see section DB3).
Extra guides supplied on lengths 450mm and above
6510 shown with staple option (ST)
Extra guides supplied on lengths 450mm and above
6511 shown with staple option (ST)
Extra guides supplied on lengths 450mm and above
6522 shown with staple option (ST)
Ø25
34
shoot size 10 x 10
length of throw 20
6510/6522 projection 36
6511 projection 27
Fixings
6510
12
12
Ø20
6511
Bolt Bodies & Staples (ST) supplied with
finish matched no.6 x 25mm wood screws.
FP, AP & UP supplied with finish
matched no.6 x 19mm wood screws.
L (shoot length)
Ø25
28
34
Chamfered
shoot end
30
12
L
A
B
120
150
6522
30
C
D
E
F
G
200
250
300
450
600
custom lengths
upon request
(120mm minimum)
(*) cranked shoot available on size C and above
type 3 supplied
type 3 supplied
FP
type 3 supplied
AP
Flat Strike Plate
UP
Angle Strike Plate
Universal Strike Plate
CK cranked
version (*)
see pages DB4:020 & 021 to order Strikes & Staples separately if required
18
19
50
aperture
14 x 11
apertures
14 x 11
50
32
33
1.6
© Frank Allart & Company 2015
1.6
1
1
15
1
3
4
4
4
3
3
3
2
2
2
UPDATED
06/15
DB1:040
Shield Logo device only to support main logo in a secondary location
or watermark
®
Door Bolts
Skeleton Bolts
Two Surface Mounted Skeleton
Door Bolts offered with different
knob designs incorporating
a concealed spring loaded
mechanism to hold the bolt
shoot in the thrown & retracted
positions. Both are available in
several lengths, and with the
option of a Cranked Shoot.
Both complement the 0801 type
Cremone Bolt (see section DB3).
Extra guides supplied on lengths 450mm and above
6501 shown with staple option (ST)
L (shoot length)
31
shoot size 13 x 6
length of throw 18
projection 32
Ø25
31
50
L
Chamfered
shoot end
A
B
C
D
E
F
G
120
150
200
250
300
450
600
custom lengths
upon request
(120mm minimum)
(*) cranked shoot available on size C and above
Extra guides supplied on lengths 450mm and above
6503 shown with staple option (ST)
Fixings
Bolt Bodies & Staples (ST) supplied with
finish matched no.6 x 32mm wood screws.
FP, AP & UP supplied with finish
matched no.6 x 19mm wood screws.
shoot size 13 x 6
length of throw 18
projection 34
L (shoot length)
31
Ø32
31
50
Chamfered
shoot end
L
A
B
120
150
C
D
E
F
G
200
250
300
450
600
custom lengths
upon request
(120mm minimum)
(*) cranked shoot available on size C and above
type 4 supplied
type 4 supplied
FP
type 4 supplied
AP
Flat Strike Plate
UP
Angle Strike Plate
CK cranked
version (*)
Universal Strike Plate
see pages DB4:020 & 021 to order Strikes & Staples separately if required
18
19
aperture
17 x 7
50
apertures
17 x 7
50
32
1.6
15
1.6
1
© Frank Allart & Company 2015
3
1
4
33
4
2
1
3
4
3
2
3
UPDATED
06/15
2
DB1:050
Shield Logo device only to support main logo in a secondary location
or watermark
®
Door Bolts
Chain Bolt & Foot Bolt
A spring loaded Chain Bolt
supplied with a Hold Open Peg
to secure the Chain Ring in the
retracted position, along with a
matching Foot Bolt.
Both are available in two lengths
as standard.
42
25
shoot size
14 x 8
both staple and
flat strike plate
are supplied
L
19
50
25
42
350
Chain Ring
shown in
retracted
position
Hold Open
Peg
A
B
L (length) 100
150
Chamfered
shoot end
6494 (available with longer chains upon request)
Fixings
42
14
Supplied with finish matched no.8 x
25mm wood screws (except Flat Strike
Plates no.6 x 19mm & Easy-Clean Floor
Sockets no.6 x 38mm).
L
shoot size
14 x 8
25
64
19
19
50
A
supplied with both
flat strike plate
and easy-clean
floor socket
L (length) 100
B
150
Chamfered
shoot end
6492
© Frank Allart & Company 2015
UPDATED
06/15
DB1:060
Shield Logo device only to support main logo in a secondary location
or watermark
®
Door Bolts
Loop Handle Bolt
A Loop Handle Bolt that can be
installed either at the top of a tall
door, or at the bottom of any door,
where ease of use is important.
The generously designed Loop
Handle provides for a good grip
and is ideal for anyone who finds
a regular knob type bolt difficult
to operate. This Bolt incorporates
a concealed spring loaded
mechanism to hold the bolt shoot
in the thrown & retracted positions.
100
100
20
75*
lockable version
L
75*
75*
25
25
42
42
Fixings
lockable version (LK)
non-lockable version
Bolt Body & Staple (ST) supplied with
finish matched no.8 x 25mm wood screws.
FP’s, AP’s & UP’s supplied with finish
matched no.6 x 19mm wood screws.
maximum projection 42 (including loop handle)
shoot size 14 x 8
length of throw 25 (extended throw available)
*please note guide
lengths will increase
when ordering extended
throw versions.
Chamfered
shoot end
6487 shown with staple option (ST)
type 2
LK
lockable version
(nickel plated key
supplied)
L (length)
© Frank Allart & Company 2015
type 2
FP
AP
Flat Strike Plate
Angle Strike Plate
type 2
UP
Universal Strike Plate
see pages DB4:020 & 021 for Strike Plate & Staple dimensions
(and to order separately if required)
A
B
C
D
300
400
500
600
CK
cranked
version
custom lengths
upon request
(300mm minimum)
DB1:070
Shield Logo device only to support main logo in a secondary location
or watermark
®
Door Bolts
Privacy Bolts
The 8052 & 8053 Privacy Bolts
are designed for use on traditional
closet doors and feature an external
emergency coin release. They are
non-handed and supplied with a
reversible disc offering a choice of
either vacant/engaged or red/green
indication.
The 0448 is a small yet versatile Bolt
which is suitable for door, cabinet, or
window applications.
Both Bolts are available with
alternative Knob designs and
extended shoots. Please contact us to
discuss possibilities.
reversible disc
vacant / engaged
or red / green
universal strike plate
box keeper
57
62
57
33
25
40
32
40
shoot size 13 x 6, length of throw 22, projection 24
8052 Privacy Bolt Set supplied with Box Keeper
8053 Privacy Bolt Set supplied with Universal Strike Plate
Fixings
0448 supplied with finish matched
no.6 x 19mm wood screws.
8052 supplied with finish matched no.6 x
25mm wood screws.
8053 supplied with finish matched
no.6 x 19mm & no.6 x 25mm wood screws.
0448 supplied with both Staple & FSP (Angle Strike Plate available to order separately)
73
shoot size 13 x 6
length of throw 12
projection 28
© Frank Allart & Company 2015
40
18
19
38
DB1:080