ThE World`s LargEsT ManufacTurEr Of 1955-56

Transcription

New Parts
SUPPLEMENT
ThE World’s Largest Manufacturer of 1955-56-57 Chevrolet Restoration Parts
to Catalog 31
ADD TO DANCHUK CATALOG FOR
MOST COMPLETE LIST OF PARTS
NEW PARTS AdditionS to Catalog 31
AT LAST . . . .1956 BEL AIR MOULDINGS
MADE IN THE USA
#17317
#17312
#17314
#17315
Best 1956 2-Door Mouldings - MADE IN THE USA!
#17311, #17316 and #17317
1956 BEL AIR Mouldings
That’s right, two AND four door. We have
completely tooled up in-house and are now
making all 1956 side stainless 100% in the
United States of America! The tooling
was made 100% by Danchuk hands from
American steel. Each moulding is created
out of the best stainless steel available in the
US with the most brilliant polish you could
imagine. And yes, we knew there was no
way we could put all of this time and effort
into such a huge project and leave our four
door friends out. SO we now have the most
beautiful and correct side stainles for two
and four door cars. Don’t spend your hard
earned money on anything but the best . . . .
Danchuk, “There’s no comparision”.
1956 2 & 4-Door, Bel Air Fender Spear Point, Driver & Psngr, Best
.................................................................................................#17311........... $44.95/ea.
1956 2-Door, Door, Bel Air, Lower Driver/Upper Psngr, Best
.................................................................................................#17312........... $49.95/ea.
1956 2-Door, Door, Bel Air, Upper Driver/Lower Psngr, Best
.................................................................................................#17313........... $49.95/ea.
1956 2-Door, Bel Air, Quarter Panel, Driver, Best.................#17314..........$114.95/ea.
1956 2-Door, Bel Air, Quarter Panel, Psngr, Best.................#17315..........$114.95/ea.
1956 2 & 4-Door, Bel Air, Fender, Upper Psngr/Lower Driver, Best
.................................................................................................#17316........... $49.95/ea.
1956 2 & 4-Door, Bel Air, Fender, Lower Psngr/Upper Driver, Best
.................................................................................................#17317........... $49.95/ea.
Good 1956 2-Door Mouldings - IMPORTED
1956 2 & 4-Door, Bel Air Fender Spear Point, Driver & Psngr, Good
.................................................................................................#711............... $39.95/ea.
1956 2-Door, Door, Bel Air, Lower Driver/Upper Psngr, Good
.................................................................................................#714............... $44.95/ea.
1956 2-Door, Door, Bel Air, Upper Driver/Lower Psngr, Good
.................................................................................................#715............... $44.95/ea.
1956 2-Door, Bel Air, Quarter Panel, Driver, Good................#729.............$106.95/ea.
1956 2-Door, Bel Air, Quarter Panel, Psngr, Good................#730.............$106.95/ea.
1956 2 & 4-Door, Bel Air, Fender, Upper Driver/Lower Psngr, Good
.................................................................................................#713............... $44.95/ea.
1956 2 & 4-Door, Bel Air, Fender, Lower Driver/Upper Psngr, Good
.................................................................................................#712............... $44.95/ea.
*See Page 2 for remaining 4-Door Mouldings
Phone : (800) 648-4728 • www.danchuk.com
1
New Parts
#17124-17125
#17126-17127
Center Post Beltline
Stainless MOULDINGS
This is the center post beltline moulding
which keeps the continuity of the belt line
mouldings on the front and rear doors of
4-door sedans. Danchuk # 17000 will work
on any 1955-1957 classic Chevy Bel Air
4-door sedan.
1955‑57 Bel Air 4-Door Sedan
............................ #17000....... $44.95/pr.
#17128-17129/#17134-17135
#17130-17131
1956 4-Door Mouldings - MADE IN THE USA!
#17200
#17201
#17202
#17132-17133
We have completely tooled up in-house and are now making all 1956 side stainless 100%
in the United States of America! The tooling was made 100% by Danchuk hands from
American steel. Each moulding is created out of the best stainless steel available in the
US with the most brilliant polish you could imagine. And yes, we knew there was no way
we could put all of this time and effort into such a huge project and leave our four door
friends out. SO we now have the most beautiful and correct side stainles for two and
four door cars. Don’t spend your hard earned money on anything but the best, Danchuk,
“There’s no comparision”.
1956 Door, Front, Lower Driver/Upper Psngr, Hardtop........#17124........... $49.95/ea.
1956 Door, Front, Upper Driver/Lower Psngr, Hardtop........#17125........... $49.95/ea.
1956 Door, Rear, Driver, Hardtop...........................................#17126........... $99.95/ea.
1956 Door, Rear, Psngr, Hardtop............................................#17127........... $99.95/ea.
1956 Door, Front, Lower Driver/Upper Passenger, Sedan...#17130........... $49.95/ea.
1956 Door, Front, Upper Driver/Lower Passenger, Sedan...#17131........... $49.95/ea.
1956 Door, Rear, Driver, Sedan..............................................#17132........... $99.95/ea.
1956 Door, Rear, Psngr, Sedan..............................................#17133........... $99.95/ea.
1956 Quarter Panel, Driver, Hardtop......................................#17128........... $99.95/ea.
1956 Quarter Panel, Psngr, Hardtop......................................#17129........... $99.95/ea.
1956 Quarter Panel, Driver, Sedan.........................................#17134........... $99.95/ea.
1956 Quarter Panel, Psngr, Sedan.........................................#17135........... $99.95/ea.
Vertical Fin Mouldings
Outside Rear View MirroR
With LED Turn signal
Billet Specialities
Slim Line License frame
These replacement mirrors feature a polished stainless head, as original, and a
chrome plated base. They also have a 9
LED arrow hidden inside the mirror glass.
These mirrors fit both sides, just rotate the
head to point the arrow in the correct direction, and include a base gasket, mounting
bracket and mounting hardware and they
are easy to hook up. Just route the wires
through your door and under the dash,
connect them to the front turn signal wires
under the dash near the steering column.
1955‑57....................................................................................#16993........... $34.95/ea.
1957 Passenger.. #17200.....$155.95/ea.
1957 Driver......... #17201.....$109.95/ea.
1957 Gas Door Filler
............................ #17202.....$109.95/ea.
All........................ #17146....... $21.95/ea.
2 Catalog Supplement
New Parts
Bezels not Included
Digi-tails conversion kits
DIGI-TAILS kits are safer and brighter than standard factory lights or other LED kits because these light-panels contain high-intensity wide-angled LEDs that are strategically
positioned to maximize light output and fully optimize your lenses. And are also the only
fully sequential LED kits. Digi-Tails utilize advanced technology by lighting LED’s in a
fluid and sweeping pattern, rather than merely lighting up blocks of LEDs. DIGI-TAILS
allows you to choose standard operations or the fully sequential feature with a flip of a
switch, conveniently located on every board. Included pigtail kits come complete with
everything needed to replace your old standard bulbs with high quality LED lighting; clear
instructions are included. DIGI-TAILS are designed and manufactured for durability and
unsurpassed quality here in the USA.
1955 Taillight...........................................................................#17191.......... $249.95/kit
1956 Taillight...........................................................................#17192.......... $189.95/kit
1957 Taillight...........................................................................#17193.......... $199.95/kit
1955 Parklight.........................................................................#17194.......... $109.95/kit
1956 Parklight.........................................................................#17195.......... $109.95/kit
1957 Parklight.........................................................................#17196............ $99.95/kit
1955 Taillight & Parklight........................................................#17197.......... $299.95/kit
Classic 7” Hi/Lo HID
or XENON Headlights
Delta headlights are a direct
replacement for your stock
sealed beam lights and re-use
the original mounting hardware and connectors. These
DELTA lights are equipped
with lead-crystal lens, steel
reflector and rubber boots to protect them from the elements and they are 28% brighter
than daylight. The City Light version is equipped with built-in city light that can be wired
as a park/turn signal light or a daytime runner. H.I.D. lights are not DOT approved and
are for off road use only.
1955‑57 HID.............................................................................#17021.......... $399.95/pr.
1955‑57 HID with City Lights.................................................#17020.......... $399.95/pr.
1955‑57 Xenon with City LIghts.............................................#17019.......... $129.95/pr.
HAlo Angel Eyes Halogen
Headlights
All 7”, White......... #17304..... $164.95/pr.
All 7”, Multi-Color
............................ #17305..... $219.95/pr.
Halogen Headlight With
White Halo
This is a halogen replacement headlight
with a white LED halo around the outer rim
of the bulb. Danchuk #17024 will work on
any 1955-1957 classic Chevy model.
All 7-inch............. #17024.......$24.95/ea.
Headlight bucket assembly
Finally the days of searching swap meets and
junkyards is over. They come complete with
the headlight bucket, retaining ring, springs,
gasket and adjuster. All you need to add
is the bulb and a new bezel. Wiring is sold
separately. Dancuk #16987 will work for any
model of 1957 classic Chevy. Reproduction
headlight bucket assembly fits both sides.
1957..................... #16987.......$52.95/ea.
3
New Parts
Touch‑N‑Go
Keyless ignition
system
Get the most advanced keyless ignition technology at
the tip of your finger, with the
Touch-N-Go Start keyless
ignition system from Ididit.
This is the industries FIRST
touch sensitive start system
and features a 22 mm aluminum button with multi-color
LED lights that always let
you know what mode it’s in. There are no moving components to wear out, ensuring
Crystal Halogen Headlight
years of outstanding performance. You’ll never have to use your keys again! Just stick
This halogen sealed beam direct replace- your programmable key fob in your pocket or wallet and the system will sense your apment offers a smooth glass lens and a crystal proach, having the capability of automatically unlocking your door as you get close and
designed reflector to maximize focus and locks as you leave (the system only responds when the key fob is in range). For added
safety, this system can also be programed to turn on your dome lights as you approach.
projection.
All 7”................... #17184.......$16.95/ea. All.............................................................................................#17032.......... $628.95/kit
AM/FM Wonderbar Radios
Retrosound ZUMA AM/FM Stereos
These reproduction radios are the closest things to the originals in
appearance, but they have allot of the updated features you need
for a better sound system. All radios fit just like the originals and use
factory style antenna, the Wonderbar duplicates the action of the
original as it seeks up, then returns to the bottom and starts over.
All radios feature: AM/FM a digital tuner, AM dial is in foreground
FM is in background, 10 Presets (5AM, 5FM), 4X45 watts RMS
out, CD or satellite radio inputs (2 RCA rear jacks), correct knobs
and pushbuttons. Knobs control: volume, bass, treble, balance,
fader and tuning.
1955 180 Watts................................ #17157.............$695.95/ea.
1956 180 Watts................................ #17158.............$695.95/ea.
The new Retrosound Zuma looks like an old-fashioned radio
-- complete with authentic-look push button styling and replica
knobs -- but offers the modern conveniences of a rear mounted
USB port, two auxiliary inputs, built in high power (45X4) amplifier
and digital AM/FM tuner with 30 presets. You can connect your
digital audio player, satellite radio, or a USB thumb drive loaded
with music files and enjoy hours of entertainment in your classic
vehicle. An enhanced LCD display features dual-color (white and
green) illumination.Two sets of preamp outputs let you add external
amplifiers. For the latest in audio technology for your car, choose
a Retrosound Zuma.
1955-56 with Chrome Face............. #17258.............$279.95/ea.
1957 with Chrome Face.................. #17260.............$279.95/ea.
1955-56 with Black Face................. #17260.............$279.95/ea.
1957 with Black Face...................... #17261.............$279.95/ea.
New Parts
Painless Performance Classic Braid Hoses
The newest wire wrap by Painless Performance is “Classic Braid”. Classic braid is a tighter weave than power braid which looks very
original in your classic car. It is woven from high tech materials and features a lateral split for ease of installation. Classic braid resists
cuts and abrasions and it retains it’s shape up to 250 degrees. The Classic Braid chassis kit contains: 6-feet of 1-inch diameter, 10feet of 3/4-inch diameter, 30’ of 1/2-inch diameter, 30’ of 3/8-inch diameter, 30’ of 5/16-inch diameter, 20’ of 3/16-inch diameter classic
braid wire wrap along with heat shrink, tie wraps and tape.
All Kit............................................................................................................................. #17031..........................................$269.95/kit
All 3/16”, 20ft.................................................................................................................. #17025........................................... $34.95/ea.
All 5/16”, 20ft.................................................................................................................. #17026........................................... $42.95/ea.
All 3/8”, 20ft................................................................................................................... #17027............................................$47.95/ea.
All 1/2”, 20ft.................................................................................................................... #17028........................................... $52.95/ea.
All 3/4”, 20ft.................................................................................................................... #17029........................................... $55.95/ea.
All 1”, 10ft....................................................................................................................... #17030........................................... $44.95/ea.
GPS Skydrive antenna, speedometer sender
Calibrate your speedometer in less than a minute and you don’t
even have to leave your driveway! Sky Drive is the world’s most
accurate electronic speedometer sending unit. No need for ECU
convertors or pulse signal generators screwed onto your transmission. The new Sky Drive uses GPS Satellite signals to operate
your electronic speedometer. It updates 10 times per second and
with one push of a button it’s ready to go. Danchuk #16989 will
work on any 1955-1957 Chevy with a Classic Instruments gauge
pack. Skydrive! the worlds most accurate speedo sender.
All..................................................... #16989.............$249.95/ea.
GPS Speedometer
Interface module
This Auto Meter universal GPS interface module turns any electronic speedo into a GPS speedo with the push of a button. The
units are plug and play for all Auto Meter speedos and they will
also work with virtually any electronic speedo on the market with
an on-button 10 second calibration. The paintable magnetic micro
antenna is fully sealed to keep out water and dust. 10 Hz sampling
rate. Danchuk # 17014 will work for any 1955-1957 classic Chevy
with an aftermarket electronic speedo as well as other vehicles
you may have in your collection.
All..................................................... #17014............. $199.95/ea.
5
New Parts
Authentic Series 57 Clock
#17121
1957 Black.......... #17122.....$219.95/ea.
Classic Intruments Authentic Series 57 Dash Gauges
These packages come complete with electronic programmable speedometer; electronic
tachometer, fuel, oil, psi, water temperature and volt gauges, all necessary sending
units with fuel gauge compatible to the stock sender, custom made brackets specially
fabricated to mount new Classic Instruments gauges into your stock opening complete
with appropriate screws, high beam indicator mounted inside speedometer unit. Bezels
not included. Authentic series designed to replicate original 1957 dash gauges.
1957 Black...............................................................................#17121......... $828.95/ea.
Nomad Back rest seat stainless top mouldings
1955-57 Top.............................................................................#17246..........$119.95/ea.
1955-57 Top.............................................................................#17247........... $54.95/ea.
1955-57 Half-Moon..................................................................#17248........... $69.95/ea.
1955-57 Bottom.......................................................................#17249..........$119.95/ea.
1955-57 Corner........................................................................#17250........... $39.95/ea.
1955-57 Bottom Front.............................................................#17251..........$169.95/ea.
1955-57 Bottom Rear..............................................................#17252..........$119.95/ea.
1955-57 Front Corner..............................................................#17253............$76.95/ea.
1955-57 Bottom Side..............................................................#17254........... $54.95/ea.
1955-57 Bottom Hinge Corner...............................................#17255............$74.95/ea.
1955-57 Bottom Little Corner.................................................#17256........... $45.95/ea.
Glove box Door HingeS
1955‑56............... #17067.......$39.95/ea.
1957..................... #17068.......$39.95/ea.
Convertible Top mount
Brace assembly
1955‑57 Driver.... #17036.....$265.95/ea.
1955‑57 Passenger
............................ #17037.....$265.95/ea.
Generator Bracket
with Power Steering
1956-57 6-1/2”..... #17257.......$24.95/ea.
New Parts
Billet SpecIALITIES Brake/
Clutch pedal covers
1955‑57 Polished
............................ #17115.......$39.95/ea.
1955‑57 Black..... #17116.......$39.95/ea.
Billet SpecIALITIES Floor
mount gas pedals
1955‑57 Polished
............................ #17109.......$79.95/ea.
1955‑57 Black..... #17110.......$79.95/ea.
Billet SpecIALITIES
Non‑Power, XL Brake pedal
covers
1955‑57 Polished
............................ #17119.......$45.95/ea.
1955‑57 Black..... #17120.......$45.95/ea.
Billet Direct-fit brake &
clutch pedal arms
Direct fit pedal assemblies are designed to
replace original brake and clutch pedal arms.
Billet aluminum construction with windowed
arms complement other Lokar products.
Curved pedal pads included and bronze
pivot bushing for increased durability. Hardware included
1955-57 with Standard Pads
............................ #17276.....$349.95/ea.
Billet Direct-fit auto brake
pedal armS
1955-57 with Standard Pad
............................ #17274.....$179.95/ea.
1955-57 with Power Brake Pad
............................ #17275.....$179.95/ea.
Billet SpecIALITIES Firewall
mount gas pedals
1955‑57 Polished
............................ #17111......$104.95/ea.
1955‑57 Black..... #17112.....$104.95/ea.
Billet SpecIALITIES Power
Brake pedal covers
1955‑57 Polished
............................ #17117.......$45.95/ea.
1955‑57 Black..... #17118.......$45.95/ea.
Inner Fender Terminal Block
Clip set of 2
Stainless Sill Plates With Bow tie
These custom sill plates feature brushed and polished stainless accents with a thin black
outlined trim. The raised ribs and bow tie are polished while the rest is brushed. Fits all
2-door body styles and mounting screws are not included.
1955-57 2-Door........................................................................#17236.......... $139.95/pr.
This is a three terminal wiring block that
mounts in the inner fender of 1955-1956
Chevy cars and trucks. Danchuk #17012
will work on any 1955-1956 classic Chevy
model. Some aftermarket terminal blocks
may require minor trimming.
1955‑56............... #17012........ $9.95/set
7
New Parts
Billet Aluminum Trunk Trim kit
This custom trunk trim kit is machined out of aluminum and attaches using 3M Trim Tape.
1957 3-Piece.................................................................................................................. #17156..........................................$279.95/kit
1-piece
molded
vinyl floor
mat
This is a molded
vinyl pebble grain
floor mat that fits
in the passenger
area of your trifive and fits all
body-styles and
is trimmed to fit.
Not a reproduction of the original
mat, but an excellent high-quality replacement for those who don’t want to put carpet in
the 150’s or 210’s. Installs and trims easily and comes with a jute backing for insulation.
1955-57 Black..........................................................................#17173..........$185.95/ea.
Trunk Hinge Torsion Rods
Tired of getting hit in the head when you open your trunk lid? This pair of trunk hinge torsion bars, or trunk hinge springs, will give you the proper spring tension to keep the trunk
lid from falling on your head. Get a set of these and never worry about dents in your scalp
again. Danchuk # 6988 will work for any model 1955-1957 Chevy hardtop or convertible.
1955‑57 Hardtop, Conv............................................................#16988.......... $109.95/pr.
Billet SpecIALITIES Ball Mill
Wire Looms
All........................ #17088....... $69.95/pr.
All Bowtie........... #17089....... $79.95/pr.
Billet SpecIALITIES Dimmer
switch covers
1955‑57 Round, Polished
............................ #17113.......$16.95/ea.
1955‑57 Round, Black
............................ #17114.......$16.95/ea.
Billet
SpecIALITIES
Distributor Clamp
All SB/BB, Polished
............................ #17090.......$29.95/ea.
Billet Specialities
Oval Air CleanerS
Fits 4-barrel carbs with a 5-1/8 Air horns.
All Small, Ball Milled
............................ #17069..... $119.95/ea.
All Large, Ball Milled
............................ #17070.....$129.95/ea.
All Large, Ribbed, Polished
............................ #17064.....$155.95/ea.
Billet SpecIALITIES HEX Valve
cover hold downs
All 4-Pack........... #17083...... $24.95/set
#17189
New Parts
#17185
Billet SpecIALITIES
Ball Mill Valve Covers
1959‑86 SB, Short
............................ #17079..... $104.95/pr.
1959‑86 SB, Tall.. #17080..... $104.95/pr.
Billet SpecIALITIES
“Chevrolet” Valve Covers
1959‑86 SB, Short
............................ #17081..... $124.95/pr.
1959‑86 SB, Tall.. #17082..... $124.95/pr.
All BB, Tall.......... #17085..... $184.95/pr.
Billet SpecIALITIES
Ball Mill Valve covers
All BB, Short...... #17086..... $184.95/pr.
All BB, Tall.......... #17087..... $184.95/pr.
Finned Aluminum Valve Covers
with Chevrolet Scripts
These PML valve covers are
standard perimeter mount covers
for pre-1986 small block Chevy
engines.The CHEVROLET script
and fins are cast into the cover and are
raised. On powder coated parts, the powder
coat is shaved off the top of the script and
the fins. These valve covers feature cast-in
baffling and a mid-height design that will
clear most roller and/or ratio rockers. All
Of these covers feature: Strong sand-cast
aluminum construction, thick side walls
and gasket flanges that will not bend when
bolts are tightened, cast-in internal baffles
(1960-86 version) and mounting hardware
is included
Late 59-86 Cast.. #17188..... $230.95/pr.
Late 59-86 Orange
............................ #17189..... $349.95/pr.
Late 59-86 Polished
............................ #17190..... $395.95/pr.
Billet Specialities
Breather Cap With Bowtie
All........................ #17072.......$44.95/ea.
Billet Specialities
PCV Breather With Bowtie
All........................ #17073.......$44.95/ea.
Billet SpecIALITIES Ribbed
Valve Covers
1959‑86 SB, Tall.. #17078....... 209.95/pr.
#17190
These sand cast aluminum valve covers
feature raised CHEVROLET script lettering
and 7 fins. They have perimeter mounting
with staggered or offset bolt holes for 1955
to early 1959 cylinder heads.The mid height
design clears most roller rockers. These
valve covers do not have a provision for
PCV, breather or oil fill because the original
valve covers did not have a provision for
PCV, breather or oil fill. This was done in
the intake manifold.
1955-59 Cast....... #17185..... $230.95/pr.
1955-59 Orange.. #17186..... $349.95/pr.
1955-59 Polish.... #17187..... $395.95/pr.
Billet SpecIALITIES Oval PCV
Breather COVER
All Ribbed........... #17077.......$52.95/ea.
Billet SpecIALITIES Oval
Breather CAP
All Ribbed........... #17076.......$52.95/ea.
Billet Specialities
Breather COVER
All Ball Mill......... #17074.......$39.95/ea.
Billet SpecIALITIES
Valve cover Long stud kiT
All 4-Pack........... #17084........ $4.95/set
Billet SpecIALITIES
PCV Breather CAP
All Ball Mill......... #17075.......$39.95/ea.
Billet Specialities PCV Valve
All Polished........ #17071.......$32.95/ea.
9
New Parts
Small Block ManifoldS
With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best
combination of Edelbrock proven performance and looks in a single box., these kits include:
an Edelbrock manifold and a performer or Thunder AVS series carb with Standard finish
to suit your engines air and fuel requirements, a chrome fuel inlet, high-quality Edelbrock
intake gasket set, intake bolt set and carb stud kit.
1957-86 Performer EPS, 600 Carbs.......................................#17165.......... $589.95/kit
1957-86 Performer Air Gap, 600 Carbs..................................#17166.......... $695.95/kit
1957-86 Performer RPM, AVS 800 Carbs...............................#17167.......... $729.95/kit
1957-86 RPM Air-Gap, AVS 800 Carbs...................................#17168.......... $779.95/kit
Edelbrock Carb
Calibration kits
Small Block Manifold with install kitS
Edelbrock has packaged all the necessary components to replace your stock iron intake
manifold. These kits include an Edelbrock aluminum intake manifold, intake gasket set,
carburetor base gasket, RTV sealant, intake bolts and carburetor studs for an all-in-onebox installation for your classic Chevy. Get better performance from a simple manifold
replacement kit.
1957-86 Performer EPS...........................................................#17162.......... $239.95/kit
1957-86 Performer RPM..........................................................#17163.......... $249.95/kit
1957-86 RPM Air-Gap..............................................................#17164.......... $309.95/kit
All calibration kits include an assortment of
metering rods and jets, one pair of metering rod retaining springs and a complete
assortment of step-up springs
All #1486............. #17216....... $59.95/kit
All #1479............. #17217....... $69.95/kit
All #1487............. #17218....... $45.95/kit
All #1480............. #17219....... $69.95/kit
All #1489............. #17220....... $54.95/kit
All #1840............. #17221....... $59.95/kit
All #1841............. #17222....... $72.95/kit
All #1842............. #17223....... $59.95/kit
Floatless Gas tank Sender
The floatless fuel tank sender from Classic
Instruments uses a pressure transducer to
measure the amount of gas in your tank.
Designed to be be used in vented tanks
with a depth greater than 6-1/2” this sender is
installed from the top of the tank, not on an angle. You
cut the tube 1/2” shorter than the bottom of the tank, install and
wire it up according to the easy-to-follow directions. Calibration is a snap
and you never have to worry about a float going bad ever again. Danchuk # 16990 will
work in any 1955-1957 classic Chevy with a gas tank using a top mounted float as well
as other vehicles you may have in your collection. Sender measures from 240-33 OHM.
All 5‑Bolt, 240‑33 OHM...........................................................#16990........... $89.00/ea.
Billet SpecIALITIES
Fuel Pump Block off plateS
All SB.................. #17103.......$19.95/ea.
All BB.................. #17104.......$19.95/ea.
New Parts
#17231
#17230
Edelbrock Perfomer 350 V8 ENGINES
17229: The Performer 320 has 9.0:1 compression ratio and delivers 320 horsepower
and 382 ft/lbs. of torque. The Performer 320 is 100% brand new and includes a four-bolt
main GM short block, Edelbrock Performer heads, Performer hydraulic camshaft, roller
rocker arms, Performer series intake manifold, Thunder Series AVS 650 cfm carburetor
with Performer EPS manifold and comes with black powder coated accessories.
17230: The Performer 310 offers impressive looks and reliable performance with Edelbrocks 3x2 intake with 3 Edelbrock 94 Carburetors on top complete with chrome air
cleaners and progressive linkage. The Performer 310 small-block Chevy crate engine
is ideal for any classic Chevy owner looking for over 300 horsepower performance on
87-octane fuel. The Performer 310 is 100% brand new and includes a four-bolt main GM
short block, Edelbrock Performer heads, Performer hydraulic camshaft, roller rocker
arms, Finned Aluminum valve covers and satin finish intake complete with chrome filler
tube and breather.
17231:This is an affordably priced, entry level small-block Chevy crate engine for any
street rod or muscle car driver on a budget that wants affordable 300+ horspepower performance on 87-octane fuel. Edelbrock E-Street crate engines start out with a 100% brand
new GM short-block with 4-bolt main and 2-piece rear main seal. This new crate engine
features black powder coated intake manifold, carburetor, valve covers and breathers,
E-Street cylinder heads, Performer Series carburetor, Performer EPS intake manifold,
Performer Series camshaft and quality distributor. E-Street heads are designed for high
performance street applications and feature larger than stock intake and exhaust ports
to improve engine efficiency. Sold without a water pump.
All 320HP/382TQ with Carb AVS............................................#17229...... $5,799.95/ea.
All 310HP/375TQ with Triple 94 Carb.....................................#17230...... $6,999.95/ea.
All 315HP/38TQ with Carb......................................................#17231...... $4,699.95/ea.
Edelbrock E-Street EFI Base SystemS
Get the fuel economy and performance potential of electronic fuel injection with the ease
of installation of a new carburetor with the Edelbrock E-Street EFI system. It’s ideal for any
V8 engine originally equipped with a carburetor and intake manifold with a square-bore
4150 style flange. It features easy to use software pre-installed on the supplied touch
screen tablet. This software allows the user to fine tune, make adjustments and monitor
system performance without the need of a laptop PC. Part #17227 is for those who are
supplying their own high-pressure fuel system.
All.............................................................................................#17227....... $1,999.95/kit
All w-Returnless Fuel System................................................#17228...... $2,299.95/ea.
#17160
#17161
Fuel Injection Ignition Coil
1957 #107, Repro.
............................ #17160.......$89.95/ea.
2 X 4bbl Ignition Coil
1956-57 #091, Repro.
............................ #17161.......$89.95/ea.
Gas Tank Liner kit
Northern Fuel Tank Liner Kit is resistant
to gasoline, diesel fuel, hydraulic fluids,
alcohol, ethanol, and other fuel additives.
Its major use is sealing leaky fuel tanks.
Seals all pin holes, will never crack or peel.
All Quart............. #17176....... $59.95/kit
Detent Slide
Bumper
1955-57 Auto Trans
............................ #17147.........$2.50/ea.
Carb Linkage Bushing/
grommet kit
1955-64 4-Piece.. #17148......... $6.95/kit
Edelbrock Carb Airhorn and
base gasket setS
All........................ #17224...... $10.95/set
All 5-Piece.......... #17225.......$13.95/ea.
WCFB Car. Top Airhorn
screw set
All 20-Piece........ #17159...... $19.95/set
Edelbrock
Universal Choke Cable kit
All........................ #17226....... $12.95/kit
11
New Parts
Crossflow RadiatorS With Aluminum Core
support and A/C Condensor
This is a complete unit for your baby. The aluminum cross-flow
radiator features heli-arc welded tanks and top and bottom air
director/fin covers along with core support filler panels. The core
is made in the USA from the finest materials and features dual
1” tubes and 14 cooling fins per inch to make sure your classic
stays the temperature it needs to be. Fully polished, this makes a
functional and great looking addition to your engine compartment.
1955 Automatic, Polished............... #17003..........$1,695.95/ea.
1955 Manual, Polished.................... #17006..........$1,629.95/ea.
Crossflow A/C condenser
Made for cross flow applications this polished A/C condensor looks
great and is compatible with all A/C systems. Danchuk # 17009
will work on any 1955-1957 classic Chevy model.
1955‑57 Polished............................. #17009............. $319.95/ea.
Dual Fan Package With controls,
6-cyl position Radiators
Vintage air designed this specifically to help cool Tri-5’s with cooling
problems, and they got it right! This dual electric fan package is
just the thing for those hot summer days cruizing at 2 MPH as you
don’t need any forced airflow, the fans do all the work! Danchuk
# 17010 will work on any 1955-1957 classic Chevy model. For
Radiators mounted in the 6 cylinder position.
1955‑57............................................ #17010............. $419.95/ea.
Dual 11” Spal
Puller Fan
Assembly
without
Controls
This dual 11” SPAL
fan setup is just what
the doctor ordered
for cooling your Tri5. It features 12 11”
5-blade fans which
pull a whopping 2250 CFM of air. Motor thickness is 4.250 and
the fan thickness is 2.60 which means it will fit almost anywhere.
Danchuk #17011 will work on any 1955-1957 classic Chevy model
as well as other vehicles you may have in your collection. For
Radiators mounted in the 6 cylinder position.
All..................................................... #17011..............$295.95/ea.
Ididit Tilt Column
Dress up kit
All Retro, Chrome
............#17033........ $59.95/kit
New Parts
Silicone hose Radiator
Plumbing Kit
This reinforced silicone radiator plumbing
kit includes two 90 degree elbows, one 45
degree elbow and one 6” straight connector along with one 6” aluminum connector
and one 45 degree aluminim connector.
Danchuk # 17013 will work on any 19551957 class Chevy model as well as other
vehicles you may have in your collection.
All........................ #17013....... $72.95/kit
Billet SpeciAlities Steering wheels
Wheels feature Milled finger notches for a ulta-comfortable grip. Half Wraps, Horn buttons, and Hub adapters are sold separately
All 15-1/2”, Chicayne...............................................................#17136......... $254.95/ea.
All 15-1/2”, Outlaw...................................................................#17137......... $254.95/ea.
All 15-1/2”, Classic...................................................................#17138......... $254.95/ea.
Billet Specialities Steering wheel Wraps
All 15-1/2”, Black......................................................................#17139............$51.95/ea.
All 15-1/2”, Red.........................................................................#17140............$51.95/ea.
All 15-1/2”, Tan..........................................................................#17141............$51.95/ea.
All 15-1/2”, Light Gray..............................................................#17142............$51.95/ea.
All 15-1/2”, Blank......................................................................#17143............$41.95/ea.
Billet SpecIALITIES
Thermostat housingS
Billet Specialities
Hub adapters
All SB/BB, 0‑Deg.
............................ #17091.......$79.95/ea.
All SB/BB, 15‑Deg.
............................ #17092.......$79.95/ea.
1949-66 GM Columns
............................ #17144....... $57.95/ea.
Ididit/F.River/67-94 GM Columns
............................ #17145....... $47.95/ea.
Rack & Pinion
Power Steering pumpS
All Low Flow W-Reservoir
............................ #17174.....$144.95/ea.
All Low Flow W-Reservoir, Polished
............................ #17175.....$215.95/ea.
Billet Specialities Power
Steering Hose kitS W‑ Fittings
All........................ #17062..... $199.95/kit
Billet SpecIALITIES Hose EndS
All 3/8” Polished.#17097.......$12.95/ea.
All 3/8” Braided.. #17098.......$12.95/ea.
All 5/8” Polished (Rubber Heater Hose)
............................ #17099.......$15.95/ea.
All 5/8” Braided.. #17100.......$15.95/ea.
All 1‑1/2” Rubber.#17101.......$25.95/ea.
All 1‑3/4” Rubber.#17102.......$25.95/ea.
Billet SpecIALITIES
Plain Radiator caps
All 16-lb............... #17107.......$22.95/ea.
All 7-lb................. #17108.......$22.95/ea.
Billet SpecIALITIES Smooth
Overflow tankS
All 8.75”.............. #17096.....$125.95/ea.
All 13”.................. #17094.......$99.95/ea.
All 15”.................. #17095.......$99.95/ea.
13
Baer Brake Pro+ front
OE spindle disc brake kit
New Parts
The Pro+ will allow you to upgrade to a 2pc
rotor (a popular upgrade due to cosmetics
and weight savings) and give you 6 piston
Calipers. This is the first system we offer
that will allow you to have the exact same
looking brake front and rear! (Note: Baer is
the only company to offer this!).The SS4+
rear option is a cost effective, cosmetically
matching rear option as well!
1955-57 13”......... #17283.. $2,245.95/kit
Showwheels Black with
Machine Lip Streeter Wheels
All 17 X 7............. #17262.....$169.95/ea.
All 17 X 8............. #17263.....$169.95/ea.
All 18 X 7............. #17264.....$189.95/ea.
All 18 X 8............. #17265.....$189.95/ea.
All 18 X 9............. #17266.....$209.95/ea.
All 20X 8.5........... #17267.....$229.95/ea.
All 20 X10............ #17268.....$249.95/ea.
Frame mount Brake pedal/
Master cylinder Bracket
Clean up your firewall with this frame
mounted pedal and Booster/master cylinder
bracket. This kit bolts under the floor, but
is tucked up high so it won’t cause ground
clearance problems. Kit includes: brake
pedal assembly and frame bracket. 7”
Booster/master/prop. valve sold separately.
1955-57............... #17209.....$199.95/ea.
Emergency Brake
Floor Brackets
Previously only available used, these highly
sought after emergency brake floor brackets
are finally available. These mount under the
floor to the center brace and support the
emergency brake idler lever and hold the
idler assembly which is a key component
to proper parking brake operation. Danchuk
#16984 will work for any model 1955-1957
Chevy except convertible.
1955‑57............... #16984....... $79.95/pr.
Baer Pro+ front disc brake
kit for Heidts spindles
1955-57 13”......... #17286.. $2,245.95/kit
Baer Brake SS4+ front OE
spindle disc brake kit
The SS4+ front system features all the
benefits of our larger brake systems just in
a smaller package to fit 15” wheels. This is
a perfect system for the customer looking
to retain a factory type 15” wheel, or the
enthusiast that wants to have a larger wheel
with the option to go back to that stock look.
1955-57 11”......... #17281.. $1,095.95/kit
Baer SS4+ front disc brake
kit FOR HEIDT’S Spindles
1955-57 11”......... #17284.. $1,095.95/kit
Baer Brake Track4 front
OE spindle disc brake kit
The Track4 is Baer’s most popular front
offering, The Track4 is available with 13”
1pc rotors and is a great brake upgrade for
customers looking to fill their 17” wheels,
updated their car to a modern brake and
have a great visual impact! Like all our
other systems this will come complete with
everything needed to mount to the corners
on the car. Looking for a matching rear kit?
Check out the SS4 as a matching rear option with park brake? See#’s 17287-17288.
1955-57 13”......... #17282.. $1,595.95/kit
Baer TRACK4 front disc brake
kit FOR HEIDT’S Spindles
1955-57 13”......... #17285.. $1,595.95/kit
Master
cylinder
adapter
fittings
Converts your
3/8-24 fitting master cylinder to GM’s ½-20 & 9/16-18 lines.
All........................ #17153....... $16.95/pr.
Proportioning
Valve Light
switch cover
All Chrome......... #17154........ $2.00/ea.
Baer SS4 Rear Disc Brake Kits
The SS4 Rear system was designed to go
along with our Track4 front offering. This
features a 12” 1pc rotor with a drum in hat
park brake with a full billet backing plate.
1955-57 12”......... #17287.. $1,295.95/kit
The SS4+ 13” rear is a great option for
a customer looking at the Pro+ front, or
Extreme+ front that doesn’t need or want
that big of a brake on the rear. The SS4+
13” features a 13” 2pc rotor with a drum in
hat park brake.
1955-57 13”......... #17288.. $1,395.95/kit
#17210
New Parts
#17211
9-bolt hub adapters
All for Flaming River Columns,
Polished.............. #17210.......$99.95/ea.
All 69-up GM and IDIDIT Columns,
Polished.............. #17211.......$99.95/ea.
All Billet Spec. Wheels to
Flame-River Column
............................ #17212.....$109.95/ea.
Chrome Aluminum Disc brake master CylinderS
All 1” Bore...............................................................................#17149........... $85.95/ea.
All 1-1/8” Bore.........................................................................#17150........... $85.95/ea.
#17214
#17215
CHROME Disc/Drum Proportioning Valve kitS
1955-57 Disc/Drum.................................................................#17151.......... $109.95/kit
1955-57 Disc/Disc...................................................................#17152.......... $109.95/kit
5/6-bolt hub adapters
All for Flame-River Column, Polished
............................ #17213.....$109.95/ea.
All 69-up GM/IDIDIT Column, Polished
............................ #17214.....$109.95/ea.
All 67-Earlier GM Column, Polished
............................ #17215.....$109.95/ea.
Proportioning Valve Bracket and line kit
All Chrome..............................................................................#17155............ $49.95/kit
15
New Parts
Billet SpecIALITIES Top Mount A/C & Alternator BrACketS
Designed for use with the popular GM 60 to 80 amp alternators & Sanden 508 AC compressor. This bracket is CNC machined from 6061-T6 billet aluminum and polished to a
mirror finish. Ideal for small block Chevrolet® motors that do not have mounting holes
in the cylinder heads. This bracket mounts to the water pump and intake manifold to
ensure stability and belt tension. Designed for use with short water pumps, GM 10SI /
12SI alternator and Sanden 508 AC compressor.
All Polished.............................................................................#17045..........$219.95/ea.
Billet Specialities Bolt‑on
Power Steering Pulleys
All 1‑Groove, Polished
............................ #17059.......$64.95/ea.
All 2‑Groove, Polished
............................ #17060.......$69.95/ea.
Billet SpecIALITIES 1-piece
Alternator Pulley With Fan
All Polished........ #17046.......$59.95/ea.
Billet Specialities Crank Pulleys
All Small Block, Short Water Pump, 2‑Groove, Polished....#17053........... $69.95/ea.
All Small Block, Short Water Pump, 3‑Groove, Polished....#17054........... $79.95/ea.
All Small Block, Long Water Pump, 2‑Groove, Polished....#17055........... $69.95/ea.
All Small Block, Long Water Pump, 3‑Groove, Polished....#17056........... $79.95/ea.
All Big Block, Short Water Pump, 2‑Groove, Polished.......#17057........... $69.95/ea.
All Big Block, Short Water Pump, 3‑Groove, Polished.......#17058........... $79.95/ea.
Billet SpecIALITIES
A/C Clutch Cover
All Sanden 508, Polished
............................ #17047.......$44.95/ea.
Billet SpecIALITIES Water Pump Pulleys
All Short, 2‑Groove, Polished................................................#17048........... $79.95/ea.
All Long, 2‑Groove, Polished.................................................#17052........... $79.95/ea.
Billet Specialities Short Water
Pump Pulley nose cone
All SB/BB, Polished
............................ #17049.......$19.95/ea.
New Parts
Billet Specialties Tru-Trac PULLEY SYSTEMS
All Small Block, Power Steering & A/C, Standard. Polished
.................................................................................................#17040...... $2,195.00/ea.
All Big Block, Power Steering & A/C, Standard Polished....#17041...... $2,295.00/ea.
All LS‑1, 2, 3 & 6, Power Steering & A/C, Standard Polished
.................................................................................................#17042...... $2,695.00/ea.
All LS‑7, Power Steering & A/C, Standard Polished.............#17043...... $2,695.00/ea.
Billet Specialties V‑Trac
PULLEY SYSTEM
All Small Block, Power Steering & A/C,
Standard. Polished
............................ #17044.$1,395.00/ea.
Clutch pedal
cross shaft
spacer
This small ring fits on the
end of the clutch pedal
cross shaft and acts as a
spacer between the cross shaft sleeve and
splined bellcrank arm and is often forgotten
when re‑assembling the clutch pedal. Your
clutch pedal will not work correctly without
this important spacer. Danchuk #16982
will work on any 1955-1957 Chevy model
running a manual transmission.
1955‑57............... #16982.........$3.95/ea.
Milodon Replacement Oil Pans
These Milodon replacement pans are the perfect replacement for your original pan. Unlike
imported chrome pans, Milodon pans have flat unwrapped pan rails for a perfect glove
fit. They feature very effective internal horizontal baffles for efficient oil control and their
gold irridated finish assures quality and a distinctive look. Drivers side dipstick. Pan holds
5 quarts, plus the filter. Measures 8” deep at the lowest point. Note: These pans require
the use of the “thick” oil pan end gaskets. Danchuk #16996 will work on any 1955-1979
small block chevy engine. Danchuk #16997 will work on any 1986 and up small block
chevy engine and For use with engines that have a 1-pc rear main.
1956‑79 SB..............................................................................#16996..........$119.95/ea.
1986‑UP SB.............................................................................#16997..........$129.95/ea.
Clutch pedal cross shaft
sleeve
This part is the sleeve which fits through the
brake/clutch pedal housing.
1955‑57............... #16983.......$13.95/ea.
17
New Parts
Front Fender Headlight
Patch PanelS
1956 Driver......... #17203.....$239.95/ea.
1956 Passenger.. #17204.....$239.95/ea.
Factory style Quarter panelS
These 4-door hardtop full quarters have not been available until now, and they are just
like they came from the factory...they cover from lead line to lead line to lead line. Will
work on 1957 Chevy 4-door hardtops. Truck freight shipping is required.
1957 4-Door Hardtop, Driver Side w‑Holes ..........................#17016......... $779.95/ea.
1957 4-Door Hardtop, Passenger w‑Holes ...........................#17017......... $779.95/ea.
Fender Support to Cowl
Brackets
1957..................... #17233....... $25.95/pr.
Rear Quarter panel door jamb patch panelS
Body mount
Bushing Covers
1955-57 Hardtop, Convertible
............................ #17208.... $249.95/set
This is door jamb fits the 4-door hardtops only and covers from the stricker plate mount
down to the rocker panel. This patch panel repairs the quarter panel/door jamb area.
Will work on the driver side of any 1956-1957 Chevy 4-door hardtop.
1956‑57 Driver.........................................................................#16985..........$129.95/ea.
1956‑57 Psngr.........................................................................#16986..........$129.95/ea.
Front End
sheet metal Packages
1955 kits include:
• Outer Fenders
• Inner Fenders w/ Extensions
• Hood
• Radiator Core Support and Filler Panels
• Front Splash Pan w/Lower Fender Aprons
• Truck Freight Charges Apply
New Parts
These front end sheet metal packages
include all the major pieces needed
to replace damages or rusty original
front clips.
1955 w/6-Cylinder Core Support
............................ #17298..$2,499.95/ea.
1955 w/V8 Core Support
............................ #17299..$2,499.95/ea.
1957 kits include:
• Inner Fenders
• Hood
• Front Splash Pan
• Radiator Core Support w/ Filler Panels
• Lower Core Support Splash Pan Fillers
• Outer Fenders w/ Top Cowl Brackets
• Inner Fender Baffles
(Front drain tubes pass thru these)
• Truck Freight Charges Apply
150 Series w/6-Cylinder Core Support
............................ #17300..$2,499.95/ea.
Bel Air-210 w/6-Cylinder Core Support
............................ #17301..$2,499.95/ea.
150 Series with V8 Core Support
............................ #17302..$2,499.95/ea.
Bel Air-210 with V8 Core Support
............................ #17303..$2,499.95/ea.
19
New Parts
Roof Panel
1955-57 Sedan................................. #17289.............$569.95/ea.
Narrowed Trunk floor With Braces With
Wider wheel tubs kit
This kit includes the factory style mini-tubs #17018 saving you even
more money. Trunk floor has already been modified and flanged
to accept mini-tubs saving you again time and money. Spare tire
well is deleted. Fits Non-Wagon bodystyles including convertible.
Allows use of 13” wide tires when used with leaf spring pocket kit.
1955-57............................................ #17278.......... $1,079.95/kit
Trunk floor With Braces
For Wider wheel tubs
Tailgate
1955-57 Wagon Exc. Nomad........... #17279.............$649.95/ea.
Tailgate Skin
1955-57 Wagon Exc. Nomad........... #17280............. $169.95/ea.
For use with factory style mini-tubs #17018. Trunk floor has already
been modified and flanged to accept mini-tubs. Spare tire well is
deleted. Fits Non-Wagon bodystyles including convertible. Allows
use of 13” wide tires when used with leaf spring pocket kit.
1955-57 Floor Only......................... #17277.............$729.95/ea.
Spare tire well upper patch
1955-57 Nomad/Wagon.................. #17206............. $129.95/ea.
Factory Style
Mini Tubs
So you want the wider
wheels and tires but you don’t
want the normal tubbed look
in your trunk? Then these are the answer. These mini tubs appear
to be normal wheel wells from Chevrolet but they are a full 2-5/8”
wider to accomodate those larger meats. Danchuk # 17018 will work
on any 1955-1957 classic Chevy hardtop or sedan. Sold as a pair.
1955‑57 2‑5/8” Wider, Sedan, Hardtop
......................................................... #17018............. $309.95/pr.
Wagon Tailgate
Access Cover
1955‑57..........#17066....... $44.95/ea.
Spare tire well Extension kit
1955-57 Nomad, Wagon.................. #17290............... $89.95/kit
New Parts
Cargo Floor Complete
1955-57 with Braces, with Extension & Spare Tire Well
......................................................... #17207.......... $1,139.95/ea.
Cargo floor With braces & Extension
1955-57 without Spare Tire Well..... #17291.............$679.95/ea.
Cargo Floor
Complete Spare tire well
1955-57 Nomad/Wagon.................. #17205............. $419.95/ea.
Lower Spare tire WELL
1955-57 Nomad, Wagon, Sedan Delivery
......................................................... #17295............. $199.95/ea.
complete Floor pan with braces
1956-57 4-Door Hardtop
......................................................... #17306..........$1,099.95/ea.
1955-57 Nomad, Wagon, Sedn Delivery
......................................................... #17294............. $154.95/ea.
Cargo floor
shock supportS
1955-57 Lower, Driver
.............. #17296..... $58.95/ea.
1955-57 Lower, Passenger
.............. #17297..... $58.95/ea.
Cargo Floor
ExtensionS
1955-57 Left Hand, Nomad,
Wagon... #17292..... $39.95/ea.
1955-57 Right Hand, Nomad,
Wagon... #17293..... $39.95/ea.
21
New Parts
1955 Gasser Roller
It’s a steel body and chassis. Complete new steel body (less front end), complete Woody’s
Gasser Chassis with ladder bars, radiused rear wheel wells, factory seams filled and
sprayed in white epoxy coating. (Wheels and tires not included in price)
1955..........................................................................................#17310.... $29,750.00/ea.
Vent window outer frameS
Fit 2 and 4 door sedans and wagons
1955-57 Driver, Sedan/Wagon
............................ #17234..... $119.95/ea.
1955-57 Passenger, Sedan/Wagon
............................ #17235..... $119.95/ea.
Quarter Window Tracks
These MADE in the USA window tracks come fully lined and ready for installation.
1955-57 Stainless, Convertible..............................................#17309.......... $249.95/pr.
Window RegulatorS
1956-57 Front, Driver, 4-Door Hardtop...................................#17307..........$109.95/ea.
1956-57 Front, Psngr, 4-Door Hardtop...................................#17308..........$109.95/ea.
Front Door handle
release mechanism
This excellent reproduction is made of
stamped steel. Replace that old, worn out
release mechanism. Danchuk #16995 will
work on the front doors of any 1956-1957
classic Chevy 4-door hardtop.
1956‑57 4-Door Hardtop
............................ #16995....... $26.95/pr.
Rear door jamb brace
1955‑57 Driver
............................ #17038.....$149.95/ea.
1955‑57 Passenger
............................ #17039.....$149.95/ea.
Sedan AND Wagon Door Glass With Vent Delete
Smoked Windshields
Due to popular demand, smoked windshields are now available. Due to D.O.T. regulations, the tint is a 10-15% lighter smoked tint than the side and back glass which is
30%smoked. Smoked windshields also don’t have the shaded band across the top like
the factory tinted glass does.
1955-56 Hardtop, Convertible, Nomad..................................#17180..........$219.95/ea.
1955-56 Sedan, Wagon...........................................................#17181..........$219.95/ea.
1957 Hardtop, Convertible, Nomad.......................................#17182..........$219.95/ea.
1957 Sedan, Wagon................................................................#17183..........$219.95/ea.
Rubberized Rust
encapsulator
undercoating
Spray
Eastwood’s Rubberized
Rust Encapsulator is the
flexible version of their
high-performance Rust
Encapsulator coating
that applies directly over
rust or bare metal to
provide long-term corrosion protection. One can
covers about 10 square
feet. Danchuk #16994
will work for any model 1955-1957 classic
Chevy as well as other vehicles you may
have in your collection. 15 oz aerosol can.
All........................ #16994....... $19.95/pr.
New Parts
We now offer glass for those who have removed there vent windows. Please specify
bodystyle when ordering.
1955-57 Clear..........................................................................#17177........... $78.95/ea.
1955-57 Tinted.........................................................................#17178........... $78.95/ea.
1955-57 Smoked......................................................................#17179........... $78.95/ea.
Eastwood Anti-Splatter
Aerosol
All........................ #17242.......$10.95/ea.
Lakester Chrome Steel Handles
All Door ...................................................................................#17271............ $89.95/pr.
All Window Cranks.................................................................#17272............ $89.95/pr.
All Vent Window Cranks.........................................................#17273............ $89.95/pr.
Eastwood Rubber/plastic
& Vinyl Restore
All 6oz................. #17237.......$19.95/ea.
Eastwood Flexible sealer/
sound deadener W-Ext hose
All........................ #17238.......$19.95/ea.
Eastwood Aerosol
Injected cleaner
Al......................... #17239.......$12.95/ea.
Billet Crescent oval Arm rest door pullS
All Polished, Crescent Oval...................................................#17269.......... $125.95/pr.
All Polished, Oval....................................................................#17270.......... $134.95/pr.
Eastwood Self Etching
Weld-Thru Primer
All Aerosol.......... #17240.......$14.95/ea.
Eastwood Self Etching
Weld-Thru Primer
All Quart............. #17241.......$34.95/ea.
Eastwood Master welders
panel holding kit
All 6-Piece.......... #17245........$61.95/kit
Eastwood After Weld Spray
All Quart............. #17243.......$19.95/ea.
Billet Outside door handles
1955-57 Polished, 2-Door Hardtop, Convertible...................#17169.......... $339.95/pr.
1955-57 Satin, 2-Door Hardtop, Convertible.........................#17170.......... $319.95/pr.
1955-57 Polished, Sedan, Wagon, Nomad, 4-Dr. Hardtop
.................................................................................................#17171.......... $339.95/pr.
1955-57 Satin, Sedan, Wagon, Nomad, 4-Door Hardtop......#17172.......... $319.95/pr.
Eastwood Intergrips
welding clamps
All 4-Pack........... #17244.......#29.95/ea.
23
Danchuk Manufacturing
3201 S. Standard Avenue
Santa Ana, CA 92705
Presorted Standard
U.S. Postage PAID
Laguna Niguel, CA
Permit No. 400
SUPPLEMENT
to Catalog 31
ADD THIS SUPPLEMENT TO THE DANCHUK
CATALOG FOR MOST COMPLETE LIST OF PARTS!
So many New Parts,
We just had to tell
customers about them!
LOOK FOR A NEW DANCHUK CATALOG LATE SPRING!

ThE World`s LargEsT ManufacTurEr Of 1955-56

Transcription

Similar documents

Johnny Tremain by Esther Forbes Objectives

official press kit 2015

45 Plateau Incentive Program

View Full Screen

CARS THAT NEVER MADE IT These 1950s concept cars were

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

8`Wide Woodside Vinyl Storage Sheds

party for a living

10.5` Woodside Vinyl Storage Sheds

Saebo Evaluation and Treatment Kit