Toll-Free - Wiedmann Bros.
Transcription
Toll-Free - Wiedmann Bros.
1 In 1906, an immigrant from Germany, Jakob Wiedmann, had an idea to open up a store in his hometown of Venturia, North Dakota. This idea was realized as a local “Bazaar” called Wiedmann Brothers Hardware. Farmers and homesteaders could come to purchase any and all of the goods that they needed. From coffee and lantern oil, to hunting supplies and farming implements, at Wiedmann Brothers Hardware, anything a person could ever need was gathered under one roof. Toll-Free: 1 (877) 934-2444 Phone: 1 (623) 934-8973 Fax:1 (877) 828-4448 Wiedmann Bros. was originally conceived to be a division of Firebird Fiberglass, the leading fiberglass tractor canopy manufacturer in North America, owned by my dad, Jim Wiedmann. In 2006, on the 100th Anniversary of the original hardware store, Wiedmann Bros. Distributing Co., LLC was formed independently. Address: 7411 Laurel Canyon Blvd., Unit 3 North Hollywood, CA 91605 Our goal is to support authorized John Deere dealers with the highest quality aftermarket accessories for tractors, utility vehicles, and mowers at fair prices with excellent customer service. Office Hours: 7:30am - 4:30pm PST We sincerely hope that you will choose Wiedmann Bros. as your primary source for quality aftermarket accessories. As always, we are grateful for your friendship, and your business. We look forward to working with you. Best regards, and good selling! Matt Wiedmann Founder TABLE OF CONTENTS TABLE OF CONTENTS MULTI-FIT ACCESSORIES 5 CROSSOVER UTILITY VEHICLE ACCESSORIES 28 Accessories for the John Deere GatorXUV 550, 550 S4, 625i, 855d, 620i, 850d, and HPX TRADITIONAL UTILITY VEHICLE ACCESSORIES Accessories for the John Deere Gator TS, TX, TH, TE, Original 4x2 and 6x4 38 PROGATOR UTILITY VEHICLE ACCESSORIES 44 TRACTOR ACCESSORIES 46 LAWN TRACTOR ACCESSORIES 54 MOWER ACCESSORIES 61 Accessories for the John Deere Zero Turn and Golf & Turf Mowers MULTI-FIT ACCESSORIES MULTI-FIT ATTACHMENTS Drink Cage Vertical Tool Holder Striking Tool Holder Flashlight Holder » » » » » » » » » » Fits any 1.75” or smaller bar Holds 20 ounce bottle Fits any 1.75” or smaller bar Holds 1.25” dia. wood and fiberglass tools Fits any 1.75” or smaller bar Rotates 360 degrees Grommets hold secure Fits any 1.75” or smaller bar Rotates 360 degrees Grommets hold secure DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Drink Cage AR-UODC Vertical Tool Holder AR-USNV Striking Tool Holder AR-URRT Flashlight Holder AR-URRF Double Rod Holder Comm Holder Uno Gun/Bow Holder Bucket Binder » » » » » » » » Fits any 1.75” or smaller bar Reel slides into channel and locks Fits any 1.75” or smaller bar Carries GPS, phones, radios, MP3 players Fits any 1.75” or smaller bar Compression rubber cushions & holds tight Fits any 1.75” or smaller bar Holds 4-5 gallon buckets or water jugs DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Double Rod Holder AR-UCR2 Comm Holder AR-UC1 Uno Gun/Bow Holder AR-UNO Bucket Binder AR-UBB1 5 MULTI-FIT ACCESSORIES Ratcheting Rhino Grips Rhino Grip XL UTV Mount Window Mount Suction Cup Grips » » » » » » » Ratcheting design allows for securing items from 1-4 inch diameter Kwik clip design for on/off rotational in field adjustments Quick release button opens the grip quickly for easy access to gear » » Off-set mounting to maximize rack space Rubber securing straps DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Ratcheting Rhino Grips KP-21540 Rhino Grip XL UTV Mount KP-21535 Window Mount Suction Cup Grips KP-21520 Saddle Storage Box » » » 6 Mounts directly to UTV roll bar 360 degree rotation for every need 180 tilt feature (45 increments) Sold as a pair Crossover Tool Box Easy installation to the inside bed rails of your UTV » Available as a pair or single » Dimensions: 26.875” l x 4.875” w x 14.75” h (each) » UTV Grab/Sport Handles Bed Dimensions: 43.75” min x 54” max Lockable gull wing doors Scissors-type locking strut hold lids open for convenient access » » Easy in and out access to your UTV Heavy-duty neoprene construction DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Saddle Storage Box - single KP-4408 Crossover Tool Box KP-2691 UTV Grab/Sport Handles (black) VDP-50769315 MULTI-FIT ACCESSORIES Saw Press Saw Boot Gun Boot IV Loop Bracket » » » » » » » » » » » Safely transports a chainsaw Fits chainsaws with up to 24” bar Tough rubber pads cushion powerhead Adjusts up to 45 degrees Secure and protect your chain saw to your UTV Accommodates saw bars up to 20” Requires Boottector Bracket Works best with Metal Loop Bracket All-metal constructed loop bracket Fits Gun Boot® IV and Gun Boot® 6.0 cases only Also works with Saw Boot DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Saw Press - Steel Bed KP-20044 Saw Boot KP-20600 Gun Boot IV Loop Bracket KP-20032 Saw Press - Poly Bed KP-20044JD Fuel Pack Jr. with Bracket Fuel Pack Jr. with Pack Mount 4 Gallon Fuel Pack » » » » Puncture resistant, crush proof, high-density polyethylene 1.5 gallon capacity » Puncture resistant, crush proof, high-density polyethylene 1.5 gallon capacity » High-density polyethylene, legal in all 50 states Mount using 4 included 1” wide Velcro straps or mount using 2 optional pack mounts (SOLD SEPARATELY) DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Fuel Pack Jr. w/ Bracket - Steel Bed KP-89735 Fuel Pack Jr. w/ Pack Mount KP-89195 4 Gallon Fuel Pack KP-89135 Fuel Pack Jr. w/ Bracket - Poly Bed KP-89735JD Pack Mount (single) KP-89435 7 MULTI-FIT ACCESSORIES AUDIO Amplified Sound Wedge » » » » » » (iPod/MP3 player not included) Powerful 100 watt built in amplifier 12’ Aux cable works with any iPod/ MP3 12’ power cord plugs into 12 volt plug (2) marine grade 6.5” woofers/midrange speakers and (2) tweeters Mounts to any roof, or 1.5” - 2” roll bars Separate docking station for iPod/ MP3 DESCRIPTION PART NO. Amplified Sound Wedge VDP-4035A Roll Bar Mount FREE Docking Station TO 12V Roof Mount TO Amplified Sound Bar FREE Docking Station (iPod/MP3 player not included) » » » » » Powerful 200 watt, 6 speaker sound bar 12’ Aux cable works with any iPod/MP3 12’ power cord plugs into 12 volt source Marine grade speakers: (2) 6” woofers (2) 2” mid-range, and (2) 1” tweeters Easy to install! DESCRIPTION PART NO. Amplified Sound Bar - Bracket Sold Separate VDP-792501RCA TO TO 12V Roof Mount Audio Console » » » » » Fits: Any UTV or tractor with a hard roof 8 Marine waterproof retractable cover protects the DEH Pioneer CD Player MP3/WMA/MAV playback with volume and memory settings Connect your portable devices directly through the front AUX input Optional high intensity domelight Includes a high quality AM/FM » antenna. Marine speakers are water, UV, and corrosion resistant and have a one piece molded grill for speaker protection and durability. DESCRIPTION PART NO. Roof Mount Audio Console - Standard (Black) TT-RMT Roof Mount Audio Console - Dome Light (Black) TT-RMTTD Roof Mount Audio Console - Dome Light (Camo) TT-RMTTC XUV Bracket Kit TT-RMTGATOR MULTI-FIT ACCESSORIES BEDACCESSORIES Diamond Plate Aluminum Bed Cover » » » Total security for your Gator® cargo box Locks BOTH the cover and the tailgate with one keyed lock Designed so that the large door panel can be removed in seconds, providing you full use of your bed for any hauling situation Haul up to 250 lbs. ON TOP .063” diamond plate aluminum Stainless steel exterior hardware Keep weather out with the 3/4” neoprene gasket 5356 alloy TIG welds » » » » » Black LINE-X finish provides superior anti-slip finish for ultimate traction and control! Your choice of Polished Aluminum or Line-X coating! Polished Aluminum Not available for poly bed DESCRIPTION PART NO. Polished Aluminum - Steel Bed DB-JGX08C Black Line-X Coating - Steel Bed DB-JGX08CX Black Line-X Coating Diamond Plate Aluminum Drop-In Bed Box » » » Dimensions: 48” W x 42” L Box lid can be quickly removed for open bed storage .080” diamond plate aluminum with stainless steel hardware DESCRIPTION PART NO. Polished Aluminum - Fits XUV Full-Size 2010 & Newer DB-JG10B Black Line-X Coating - Fits XUV Full-Size 2010 & Newer DB-JG10BX Hitch-Step » » » Fits 2” receiver Constructed of aircraft aluminum 300 lb. weight limit DESCRIPTION PART NO. UTV Hitch-Step GD-UHS300 9 MULTI-FIT ACCESSORIES FIRE&RESCUE UTV Quick Quench Foam Fire Unit » » » » » » » » » » » » » » » » 2 different engine types available Hannay manual hose reel with 70 feet of 3/4” Good year booster hose 70 gallon water/5 gallon foam copoloy tank with lifetime warranty Twister 1024 forestry nozzle and PAC nozzle holder Stainless steel piping with lifetime warranty Pump and piping to match your color code Liquid filled discharge pressure gauge Aircraft/marine alloy skid platform Mounting Hardware for your vehicle 1-1/2” tank to pump valve 1-1/2” aux. suction valve 1-1/2” rear discharge valve 1” hose reel valve 1” recirc valve 940 lbs w/ fluids (196216A) 966 lbs w/ fluids (196216C) Each order is custom built for correct mounting & color matching to vehicle. DESCRIPTION PART NO. 5.5 HP Honda Manual Rewind on Pump RK-196216A 9 HP Honda Electric Start with Recoil Backup Engine on Pump RK-196216C Top Mount Fire Unit » » » » » » » » » » » » » » » 10 100 gallon copoly tank with 8 gallon foam cell with lifetime warranty Hale HPX75-B11 pump with 11hp Briggs & Stratton intec 4-stroke engine, electric start with recoil backup and voltage regulator, easy oil change valve, hourmeter and control panel built on engine RKO stainless steel piping with lifetime warranty RKO quick quench foam system (free) Hannay electric hose reel with (1) hose reel activation switch 100 feet of 3/4” goodyear booster hose TFT 1024 forestry nozzle with pac nozzle holder Paint to your color code 12 volt power supply 2” tank to pump valve 1 1/2” aux. suction valve (2) rear discharges 1” recirc fill valve & 1” hose reel valve Mounting hardware 1,210 lbs. with fluids DESCRIPTION PART NO. Top Mount Fire Unit RK-1962702 MULTI-FIT ACCESSORIES Deluxe Aluminum UTV Firefighting Offroad Trailer » » » » » » » » » » » » 95 gallon copoly tank with 5 gallon integral foam cell Quick quench foam system Darley/Davey high performance fire pump system with 9 HP Honda electric start engine with recoil backup Heavy duty aircraft alloy aluminum trailer/lightweight construction with roll around jack stand/foot plate included Independent torsional axle for smooth ride Tool storage Steel wheels with standard tires Stainless steel piping with lifetime warranty Hannay manual hose reel with 70 feet of 3/4” red booster hose and 1” forestry nozzle discharge pressure gauge 1-1/2” discharge; 1” discharge; 1” recirc-fill; 1” to hose reel Capable of drafting to 18 feet DESCRIPTION PART NO. Deluxe Aluminum UTV Firefighting Offroad Trailer RK-1962306 UTV Rescue Skid with Provider Seat » » » » » Heavy-Duty Aircraft/Marine Alloy Aluminum Skid Platform Junkin JSA 200 Stokes Basket Stainless Steel Mounting Hardware (4) Max Strap Stokes Securing 172 lbs. without patient/person DESCRIPTION PART NO. UTV Rescue Skid with Provider Seat RK-196218 Deluxe Medical/Rescue Skid with Storage » » » » » » » » » Heavy duty aluminum construction Low profile design Patient transport system with JSA200 stokes basket Adjustable attendant seat with seat belt Storage drawer under Patient Transport System Oxygen bottle holder (2) IV bag clips Available in tough and corrosion resistant copolymer plastic 398 lbs. without patient/person DESCRIPTION PART NO. UTV Skid Unit - Deluxe Medical/Rescue RK-196217 Shown with Optional Floats 11 MULTI-FIT ACCESSORIES FLOORMATS Optional Black LINE-X finish provides superior anti-slip finish for ultimate traction and control! Diamond Plate Floor Mats » » Added protection while driving your Gator® Protected from branches, stones, and other items that could find their way through the floor of your Gator® over time. Available in a black LINE-X finish, which acts as an anti-slip finish that can help give you some extra traction and control Cut specific to the Gator® to give you that tough, outdoor, off-road look » » DESCRIPTION PART NO. XUV, HPX, TX, and TH Diamond Plate Aluminum Floor Mats - (Polished Aluminum) DB-JG08FM XUV, HPX, TX, and TH Diamond Plate Aluminum Floor Mats - (Black Line-X) DB-JG08FMX XUV 550 Diamond Plate Aluminum Floor Mats - (Polished Aluminum) DB-JG512FM XUV 550 Diamond Plate Aluminum Floor Mats - (Black Line-X) DB-JG512FMX XUV 550 S4 Diamond Plate Aluminum Floor Mats - (Polished Aluminum) DB-JG512FMC XUV 550 S4 Diamond Plate Aluminum Floor Mats - (Black Line-X) DB-JG512FMCX HEAT&AIR Off Road Hydronic Cab-Heater (UTV Installation Kit Sold Separately) » » » » » Installation Kit for Off Road Hydronic Cab-Heater (Heater Sold Separately) Compact size - allows mounting in tight areas As low as 1/2 of an AMP - Long hours of heat without draining your battery Universal mounting system Integrated switch - No wiring or mounting needed Variable speed - Set the fan speed to your comfort level DESCRIPTION PART NO. DESCRIPTION PART NO. 0.5 Amp Off Road Hydronic Cab Heater AH-EXE200100 UTV Installation Kit for Off Road Hydronic Cab Heater AH-PLE200150 2 Amp Off Road Hydronic Cab Heater AH-EXE200200 BEST SELLER 12 Volt Ceramic Heater » » » » » 12 300 Watts, 12 Volt 15 Amp rating 12 Gauge 15’ power cord 3 speed adjustable fan Direct hook up to your battery 12 Volt Metal Fan DESCRIPTION PART NO. 12 Volt Ceramic Heater RP-681 » 2 Speed Metal Fan » 7’ power cord » Mounts to any flat surface » Ball swivel base allows for adjustment DESCRIPTION PART NO. 12 Volt Metal Fan RP-1179 MULTI-FIT ACCESSORIES HUNTINGGEAR Ratcheting Rhino Grips Gun Mount » » » » Soft cross pattern rubber grips provide increased cushioning and gripping power for items in a variety of shapes and sizes Adapter Plate Sold Separately Mounts to the floor of your UTV for easy access Adjustable with molded v-blocks and rubber straps to support firearm and barrel Adjustable height from 27 1/2” to 35 1/2” DESCRIPTION PART NO. DESCRIPTION PART NO. Ratcheting Rhino Grips KP-21540 Gun Mount KP-20073 UTV Gun Mount Adapter Plate KP-20074 Boottector Bracket Cargo Box Gun Mount Kit » » » » » » » » Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only! Mounts to steel bed rail Adjusts without the use of any tools Offers precision gun angle adjustability Mounting location does not interfere with rear visibility Compact design allows plenty of bed space Fits vehicles with bed dimension: 47.5” min - 55” max KP-20005 is MOUNT ONLY DESCRIPTION PART NO. DESCRIPTION PART NO. Boottector Bracket -Steel Bed KP-20035 Cargo Box Gun Mount Kit - Includes (2) Gun Boot 6.0 Transport KP-26700 In-Bed Double Gun Boot 6.0 Mount for 47.5-55” Steel Bed KP-20005 13 MULTI-FIT ACCESSORIES Gun Boot IV » » » Black Most popular and versatile Gun Boot case for over 10 years! Ergonomically designed handle and molded attachment points for a sling Designed to accomodate left and right hand bolt action rifles and shotguns RealTree Hardwoods Realtree All-Purpose LIMITED STOCK Mossy Oak Breakup DESCRIPTION PART NO. Gun Boot IV (Black) KP-20051 Gun Boot IV (Mossy Oak Breakup) KP-20061 Gun Boot IV (Realtree Hardwoods) KP-20071 Gun Boot IV (Realtree All Purpose) KP-20091 Gun Boot 6.0 » » » » » » DESCRIPTION PART NO. Gun Boot 6.0 (Impact - Black) KP-20025 Gun Boot 6.0 (Transport - Black) KP-20020 Transport™ model also includes a separate soft carrying gun case (shown above) that fits within the hard case instead of the standard Impact™ liner. Gun Boot IV Metal Bracket Gun Boot IV Loop Bracket » » » » » 14 Impact™ model includes a removable, shock absorbing foam and nylon Impact™ liner (not shown) that provides superior interior protection Features the largest interior room of all Kolpin Gun Boot® cases Fits up to 51” firearm Includes nylon liner (Impact Model) Includes soft interior carrying case (Transport Model) Provides ample room for 60mm scopes Utilizes all existing Gun Boot® IV brackets (sold separately) in order to mount to your Gator® Metal, two-piece brackets mount your gun boot horizontally on the bed rail Fits the Kolpin Gun Boot IV case only All-metal constructed loop bracket Fits Gun Boot® IV and Gun Boot® 6.0 cases only Also works with Saw Boot (see pg. 7) Double Gun Boot IV Mount » » » Safely carries two Gun Boot® IV cases only Heavy gauge steel with multiple attachment points Mounts to rear mesh or center roll bar tubing DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Gun Boot IV Metal Bracket KP-20129 Gun Boot IV Loop Bracket KP-20032 Double Gun Boot IV KP-20036 MULTI-FIT ACCESSORIES Overhead Gun Rack Quick Draw Bow Rack Quick Draw Gun Rack » » » » » » » » » » Super-soft rubber gun clips that provide easy access and secure transport Installs on Gators with regular tops (WILL NOT WORK) on tops that prevent access to rear top frame Provides Security and Quick Access Holds 2 bows Constructed of aircraft aluminum Weighs only 8 lbs. Universal mounting Holds 2 guns (shotgun, rifle, or muzzleloader) Unique velcro straps Quick and easy installation DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Overhead Gun Rack GD-QD855OGR Quick Draw Bow Rack GD-801S Quick Draw Gun Rack GD-QD800 Power-Ride Gun Rack Power-Ride Bow Rack Power-Ride Crossbow Rack » » » » » » » » » » Fits UTV frames 49” - 62” wide Aircraft aluminum construction Powder coat finish Soft cradles with velcro straps Fits UTV frames 49” - 62” wide Aircraft aluminum construction Cradle grips the limbs of any bow and prevents any other part from touching anything Fits UTV frames 49” - 62” wide Aircraft aluminum construction Cradle grips the limbs of any bow and prevents any other part from touching anything DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Power-Ride Gun Rack GD-UVPR900 Power-Ride Bow Rack GD-UVPR901 Power-Ride Crossbow Rack GD-UVPR901CB 15 MULTI-FIT ACCESSORIES Road Dog Kennel » » » » Constructed of aircraft aluminum Accommodates dogs weighing up to 100 lbs. Weighs only 22 lbs DESCRIPTION 20.5” high, 24” wide, 32” deep Road Dog Kennel PART NO. GD-RD100 Gun Boot 4.3 with Bracket » » » Includes Gun Boot® case and bracket Gun Boot® IV case convenience with Gun Boot® III case type mount! Removable, shock absorbing foam and nylon Impact™ liner included DESCRIPTION PART NO. Gun Boot 4.3 with Bracket KP-20053 UTV Powerloader » » » » » » » » Load big game, firewood, tool-boxes, ice-chests, saks of feed or seed, bales of hay, building materials, fence posts you name it! Without physically lifting one pound! Turn 2 and 3-man jobs into routine, single-handed tasks. The PowerLoader will even enable you to do chores that you thought you were no longer capable of handling At the push of a button, the patented telescopic lifting arms of the PowerLoader retract and curl in seconds to eliminate leverage-moving loads of up to 350 lbs. Installs onto your UTV in just minutes! Loads up to 350 lbs from ground to “locked and loaded” - ready for transport Constructed of super-tough aircraft aluminum Weighs only 29 lbs Powered by any factory or aftermarket winch (Minimum 2000 lb winch Recommended - SOLD SEPARATELY) DESCRIPTION PART NO. Power Loader GD-PL250 Power Loader UTV Mounting Bracket (Required for HPX/XUV) GD-PLUTG Winch Sold Separately - see page 26 16 MULTI-FIT ACCESSORIES IMPLEMENTS Implements - 43” Chisel Plow-Cultivator Create that trophy deer or wildlife food plot, new lawn or garden. In many cases the standard tow behind UTV disk harrow or UTV field cultivator with spring shanks can only create a shallow seedbed. Equipped with rigid shanks which are capable of easily creating deep seedbeds which in many cases translates to a stronger, faster growing crop. It can also be equipped with an optional drag harrow and a turning shovel kit for working in sod conditions. » » » » » » » Electric lift with operator controls 13.5” dia. cutting coulter 5 rigid, 1 3/8” square shanks Adjustable and quick remove shanks 9” wide cultivator sweeps Narrow chisel points included for hard ground 43” cutting width DESCRIPTION PART NO. 43” Chisel Plow KZ-003500 43” Drag Harrow (Optional) KZ-003800 Turning Shovel Kit (Optional) KZ-003801 Implements - 48” Cultipacker » » » » » Provides proper seed to soil » 48” packing width contact, which translates » Quick remove tongue hitch pin to faster, more dependable » 272 lbs without added weight » Weight rack included seed germination. » Solid steel shaft with agricultural Made up of 21 individual agricultural quality cast iron quality gearable bearings packer wheels Flip over lift method DESCRIPTION PART NO. 21, 9.5” diameter, cast iron packer wheels with crushing 48” Cultipacker KZ-003503 knobs (agricultural quality) KZ-003803 13/600 x 6, 2 ply pneumatic Cat. 1, 3-point hitch kit turf tire Wheel Kit - flip over design KZ-003802 Implements - 72” Cultipacker » » » » » » » » 32, 9.5” dia. cast iron packer wheels with crushing knobs (agricultural quality) Optional wheel kit with 13/600 x 6, 2 ply Pneumatic turf tires (optional) 72” packing width Quick remove tongue hitch pin 384 lb. weight Optional 3-point hitch kit Solid steel shaft with agricultural quality greasable bearings DESCRIPTION PART NO. 72” Cultipacker KZ-003502 Cat. 1, 3-point hitch kit KZ-003803 Wheel Kit - flip over design KZ-003802 48” Pull Behind Drag Harrow » » » » Attaches quickly to your UTV to help loosen compacted dirt With the steel teeth forward and down, it cultivates, prepares seed beds and rakes up dead forage Design allows operation in different direction for ground penetration or as a drag mat 4’ w x 5 1/2’ l = 22 sq ft DESCRIPTION PART NO. 48” Heavy Duty KP-86820 17 MULTI-FIT ACCESSORIES AcrEase Pull Behind Rough Cut Mowers These are great all around mowers that are capable of tackling heavy brush and tall grass, field or pasture mowing, food plots, or just as a trail cutter. These heavy duty brush mowers come in several different engine sizes and blade engagement clutch methods. AcrEase rough cut models offer the highest horsepower and heaviest built decks on the market for pull behind UTV mowers. VEHICLE TYPE PART NO. Class: 44” Rear Discharge 19.5 Briggs & Stratton Intek AVS (Model # MR44B) KZ-003725 Class: 44” Rear Discharge 18HP OHV Briggs & Stratton Commercial Vanguard (Twin Cylinder) (Model #MR44V) KZ-003733 Class: 57” Rear Discharge 23 HP Briggs & Stratton Intek OHV (Twin Cylinder) (Model # MR55B) KZ-003724 Class: 57” Rear Discharge 20 HP Kohler Command OHV (Twin Cylinder) (Model # MR55K) KZ-003709 Electric Clutch Blade Engagement 20 HP Kohler Command OHV (Twin Cylinder) (Model # MR55KE) KZ-003721 Electric Clutch Blade Engagement 23 HP Briggs & Stratton Commercial Vanguard (Twin Cylinder) (Model # MR55VE) KZ-003734 AcrEase Pull Behind Finish Cut Mowers These are great for providing an excellent manicured lawn at high mowing speeds. Built in heavy duty homeowner, commercial and professional grades. AcrEase mowers can either trail directly behind the tow vehicle or trail to the side. Tow an AcrEase with most any UTV, small riding mower, zero turn radius mower, or small tractor! 18 VEHICLE TYPE PART NO. Class: Homeowner 40” 12.5 HP OHV Briggs & Stratton (Model # H40B) KZ-003729 Class: Homeowner 60” 19.5 Briggs & Stratton intek AVS (Model # H60B) KZ-003722 Class: Commercial 60” 18 HP OHV Briggs & Stratton Commercial Vanguard (Twin Cylinder) (Model # C60V) KZ-003732 Class: Professional 60” 23 HP OHV Briggs & Stratton Commercial Vanguard (Twin Cylinder) (Model # Pro60V) KZ-003730 Wetlands Kit Finish Cut UTV Tongue Floatation Kit Electric Lift Kit » » » » » » » » » Doubles tire ground surface contact Great for marshy areas Easy to install Allows offset position Quick maneuverability & stability Included w/ all Rough Cut Mowers » Great for mowing around ponds or uneven ground where scalping can occur 1500 lb linear actuator Allows for quick cutting height changes In-cabin switch DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Wetlands Kit KZ-003905 H40B, H60B, C60V Tongue KZ-900084 Floatation Kit Call for Part # KZ-003909 Pro60V Tongue KZ-900083 Electric Lift Kit (57” Rough Cut Models) Electric Lift Kit (44” Rough Cut Models) KZ-003912 MULTI-FIT ACCESSORIES DirtWorks UTV 3-Point Hitch System Trick your UTV into thinking it’s a tractor with the Dirtworks system! The innovative features incorporated into the DirtWorks 3-point hitch provide quick, easy installation and adjustments without the need for tools. But we didn’t stop there. We added a heavy duty actuator that does the heavy lifting for you while providing 300lbs of down force for serious ground engagement. Just a push of a button raises and lowers the implement to the precise location so you no longer have to adjust implements, cutting depth or work height by hand. How to order... STEP 1 STEP 2 Add the 3-Point hitch system Choose hitch & suspension lockout (if applicable) STEP 3 STEP 4 Add the accessory toolbar Choose your implements Shown with Cultivator Set Item No.: KP-86100 Heavy Duty 3-Point Hitch Accessory Toolbar Rear Blade » » » » » » » » » » » 12v electric actuator lift system 20 amp maximum current draw 15” vertical lift at the drawbar 300 lbs of downforce Heavy duty steel construction Black powder coat finish Required for all attachments Five position angling Available in 48” & 60” width 13” blade height Optional box scraper attachment DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Heavy Duty 3-Point KP-WHS03HD 48” Accessory Toolbar KP-ATB48 48” Rear Blade KP-FRB48 60” Accessory Toolbar KP-ATB60 60” Rear Blade KP-FRB60 Chisel Plow/Scarifier Landscape Rake Disk Plow » » » » » » » » » » (6) 1/2” hardened steel plow teeth Loosen hard pack surfaces Adjustable height for transport Great for use with rear blade 60” width (21) 1 5/16” rake tines Great for horse corrals, trails, and beaches 54” width (2) 4 disc gangs 14” notched disc blades DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Chisel Plow/Scarifier KP-86100 Landscape Rake KP-LSR60 Disk Plow KP-DP8 19 MULTI-FIT ACCESSORIES LED Lights » Plug and play wiring harness with switch » No warm up, instant on/off » No hot spots » 10-50V DC input » No vibration or bouncing beams » 100% optically clear lens » Zero UV emissions » IP68 rating »Waterproof » Offroad use only LIGHTS Clamp Kit » » » » 3 piece adjustable clamp system Mount your new lightbar to any size tubing from 1” - 2” Allows you to mount your light bar at any angle Easy installation LED Dually - Single LED Dually - Double (Pair) » » » » » » 4 LED lights in a compact package Small 3” - 3” dimension, this light can fit anywhere 1.1 Amps 15 watts 1300 Lumens 4 LED lights in a compact package Small 3” - 3” dimension, this light can fit anywhere 1.1 Amps 15 watts 1300 Lumens DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. 1.75” Clamp Kit KP-97971 LED Dually - Single (Flood Pattern) KP-97905 LED Dually - Double (Flood Pattern) KP-97910 LED Dually - Single (Spot Pattern) KP-97906 LED Dually - Double (Spot Pattern) KP-97911 Combo LED Light Bar » 93% Optical Efficiency »Shockproof/Waterproof » 50,000+ Hour Life Span » Easy Two Wire Installation » Flood reflectors on the outside of the light and spot reflectors on the inside half of the light » Optimize both functional light spread and light distance for increased visibility 10” & 20” Combo Light Bar 30” & 40” Combo Light Bar » » » » 10” Dimensions: 11 3/8” L x 3.625” W x 3.375” H 10” Current Draw: 2.89 Amps, watts: 39, Output: 3600 Lummens 20” Dimensions: 21 3/8” L x 3.626” W x 3.375” H 20” Current Draw: 5.78 Amps, Watts: 78, Output: 7200 Lummens » » » » DESCRIPTION PART NO. DESCRIPTION PART NO. 10” Combo Light Bar KP-97920 30” Combo Light Bar KP-97930 20” Combo Light Bar KP-97925 40” Combo Light Bar KP-97935 6” Combo Light Bar Light Bar Cradle » » » Dimensions: 7 3/8” L x 3.625”W x 3.375” H Current Draw: 1.73 Amps, Watts: 23.4, Output: 2160 Lummens » » » 20 30” Dimensions: 31 3/8” L x 3.625” W x 3.375” H 30” Current Draw: 8.67 Amps, Watts: 117, Output: 10800 Lummens 40” Dimensions: 41 3/8” L x 3.625” W x 3.375” H 40” Current Draw: 11.56 Amps, Watts: 156, Output: 14400 Lummens Alternate option to mount your light Use on existing tabs, flat surfaces, or anywhere traditional mount won’t work Powder coated black for durable finish Easy installation DESCRIPTION PART NO. 6” Lights Cradle KP-97980 10” Lights Cradle KP-97981 20” Lights Cradle KP-92982 DESCRIPTION PART NO. 30” Lights Cradle KP-97983 6” Combo Light Bar KP-97915 40” Lights Cradle KP-97984 MULTI-FIT ACCESSORIES RACKS Roof Rack » » Weighs only 14 lbs. 22” x 50” x 7” cradle with multiple tie down points Rated for loads up to 100 lbs. » DESCRIPTION PART NO. Roof Rack GD-UVRR750 Front Utility Rack For a UTV owner, there is nothing handier, more convenient or appreciated, than a place to quickly store and transport gear and tools. » » » » Constructed of aircraft aluminum Weighs only 22 lbs. Rated for loads up to 100 lbs. Assembled in just minutes using regular hand tools! DESCRIPTION PART NO. Front Utility Rack GD-UVFR751 Hitch & Ride Utility Rack Perfect for transporting anything from hunting equipment, work materials, coolers, to firewood or wild game! It’s perfect for working around the ranch, home, camp, or industrial site. » » » » » » Aircraft aluminum construction Weighs only 22 lbs, but has a 400 lb capacity 22” x 50” x 7” carrying cradle Many tie-down points to insure secure transport Attaches to any 2” hitch receiver “Z-Bar” attachment allows clearance over uneven terrain DESCRIPTION PART NO. Hitch & Ride Utility Rack for 2” Receiver (with Z bar) GD-HNR1000UTV Hitch & Ride Magnum Cargo Carrier for 2” Receiver (with Z bar) GD-HNR2000UTV Hitch & Ride DRY HAUL Cargo Carrier for 2” Receiver (with Z bar) GD-HNR3000UTV Hitch & Ride Magnum Cargo Carrier » » » » » » Weight: 25 lbs Aircraft aluminum 400 lb load capacity Outside cradle dimensions: 22” x 50” x 6” Inside cradle dimensions: 20” x 48” x 6” Z-Bar gives a 7” rise Hitch & Ride Dry Haul Cargo Carrier » » » » Can be removed and serve as portable storage Aircraft aluminum construction 400 lbs. of carrying capacity Water-proof, dust-proof polyethylene storage case 21 MULTI-FIT ACCESSORIES RAMPS Premium Arched Steel Ramps These Premium arched steel ramps are the perfect solution for loading UTV’s and lawn tractors onto pickup trucks! The arched design ensures that your mower deck will not hang-up on the tailgate and are perfect for loading low ground clearance vehicles. Ramps fold to 63-1/2” long for convenient storage. 800-lb Steel Loading Ramp 1200-lb Steel Loading Ramp These ramps feature solid body construction with a punched tread pattern for superior traction over rung-style ramps. Patented overlapping hinges provide added structural support, allowing for a high load capacity of 1,200 lbs., 1,500 lbs., or 2,000 lbs. of distributed weight per set. » » » » Solid construction perfect for small wheeled items 2 cam buckle straps included for securing ramps to truck Patented overlapping hinge and heavy-duty steel for heavy loads Arch design for loading items with low ground clearance DESCRIPTION PART NO. DIMENSIONS FOLDING/OPEN POSITION LENGTH CONSTRUCTION MATERIAL WEIGHT OS-1084D 12.25 in. W x 88 in. D x 6.25 in. H; 84” x 10.5” x 2” (each) 800 lb. (400 lbs./ramp) 84 in. open; 63.5 in. fold 16 gauge steel 71 lbs 1200-lb Steel Loading Ramp OS-1084C 12.25 in. W x 88 in. D x 6.25 in. H; 84” x 10.5” x 2” (each) 1,200 lb. (600 lbs./ramp) 88 in. open; 63.5 in. fold 14 gauge steel with black powder coat finish 71 lbs 1500-lb Aluminum Loading Ramp OS-1084A 14.25 in. W x 88 in. D x 7 in. H; 84” x 10.5” x 2” (each) 1,500 lb. (750 lbs./ramp) n/a 12 gauge aluminum 49 lbs 2000-lb Steel Loading Ramp OS-1084 14.25 in. W x 88 in. D x 7 in. H 2,000 lb. (1000 lbs./ramp) 88 in. open; 63.5 in. fold 14 gauge steel with black powder coat finish 83 lbs Available in 2 colors! » » » » » 22 Premium Arched Aluminum Ramp 800-lb Steel Loading Ramp Polyester Seat Covers Offers great protection to factory seat bottom and backrest Easy installation and no tools needed Comes with all necessary mounting items and instructions Made from 600 denier PVC backed Polyester Under-seat straps used for a factory fit DESCRIPTION PART NO. XUV, HPX, TX, & TH High Back Seat Cover (Black) GM-JDGHBS11 XUV, HPX, TX, & TH High Back Seat Cover (Mossy Oak Camo) GM-JDGHBS155 4x2 Low Back Seat Cover (Black) GM-JDGLBS11 4x2 Low Back Seat Cover (Mossy Oak Camo) GM-JDGLBS155 LOAD CAPACITY 1500-lb Aluminum Loading Ramp 2000-lb Steel Loading Ramp SEATS MULTI-FIT ACCESSORIES Rumble Seat - UTV Passenger Seat The Rumble Seat is framed in lightweight aircraft aluminum and adds only 24 lbs. to the vehicle. These feature super soft, cushioned pads covered with 600 Denier PVC coated polyester. The Rumble seat also features safety belts and quick-detach brackets to allow instant installation in all popular Gator models! VEHICLE TYPE PART NO. Standard Rumble Seat (Black) GD-UVRS100BL Deluxe Rumble Seat (Black) GD-UVRS200BL MIRRORS Side View Mirrors (pair) with 1.75” Steel Clamp » » » » » Strong & durable steel clamp Super tough housing resists damage Shatterproof tempered glass Increased maneuverability Sold as a pair DESCRIPTION PART NO. Side View Mirrors with 1.75” Steel Clamp SM-18041 Kolpin Side View Mirrors DESCRIPTION PART NO. Kolpin Side View Mirror - Left Side KP-98200LH Kolpin Side View Mirror - Right Side KP-98200RH BEST SELLER Side/Rear View Mirror Auto Style Rear View Mirror » » » » » » » » » » Mounts anywhere; side or rear view Convex surface provides large viewing area Ball socket joint gives wide range 4.5” x 8” viewing surface Shatterproof tempered glass for safety Strong and durable cast alloy arm High impact ABS plastic housing Shatterproof tempered glass High visibility Increased maneuverability DESCRIPTION PART NO. DESCRIPTION PART NO. Side/Rear View UTV Mirror 1.75” clamp SM-18029 Auto Style Rear View UTV Mirror - 1.75” clamp SM-18030 23 MULTI-FIT ACCESSORIES TIRES Trailfinder VPR P341 All Terrain Tread P350 Journey Tread » » » » » » » » » » » » Height: 26” Width: 10”, 12” Ply: 6 Fits rim size: 14” Height: 25” Width: 8”, 10” Ply: 6 Fits rim size: 12” NEW Height: 25”, 26”, 27” Width: 8”, 9”, 10”, 12” Ply: 6 Fits rim size: 12”, 14” Lug Configurations W396 Duo-Trax Tread » » » » » Height: 26” Width: 9”, 11” Ply: 6 Fits rim size: 12” First asymmetrical tread design! HPX 5 x 4.5 XUV 620i/850d 5 x 4.5 XUV 625i/825i/855d 5 x 4.5 XUV 500 4 x 137 XUV 550 S4 4 x 137 First Asymmetrical Tread Design! 24 P375 Tractor Lug - Heavy Mud Tire W354 Hard Surface - Turf Tread W393 Hard Surface - Turf Tread » » » » » » » » » » » » Height: 25”, 26”, 27” Width: 8”, 9”, 10”, 12” Ply: 6 Fits rim size: 12” Height: 25” Width: 8”, 10” Ply: 6 Fits rim size: 12” Height: 25” Width: 8”, 10” Ply: 6 Fits rim size: 12” MULTI-FIT ACCESSORIES WHEELS Outback 159 - Machined Outback 159 - Black Outback 159 - Camo » » » » » » Width: 7”, 8” Height: 12”, 14” Width: 7”, 8” Height: 14” Width: 7”, 8” Height: 14” Buckshot 158 - Machined Lockout 393 - Black Lockout 393 - Chrome/Black » » » » » » Width: 7”, 8” Height: 12”, 14” Width: 7”, 8” Height: 12”, 14” Width: 7”, 8” Height: 12”, 14” Bruiser 161 - Machined Bruiser 161 - Black Warrior 375 » » » » » » » » » Width: 7”, 8” Height: 12”, 14” Not available for 620i, 625i, 850d, 855d Width: 7”, 8” Height: 12”, 14” Not available for 620i, 625i, 850d, 855d Width: 7”, 8” Diameter: 14” Not available for 620i, 625i, 850d, 855d 25 MULTI-FIT ACCESSORIES eries S tough ES WINCH PE3.5 T V’s FOR U WINCH&RECOVERY PE2.5 3,500 LB Capacity (1588 kg) PN: MM-7750112B 2,500 LB Capacity (1134 kg) PN: MM-7750105B The new Tough Series lineup UTV winches have been totally redesigned and now boast top-of-the-line recovery speeds and a new braking system. These winches include both a handheld remote control, as well as a ATV handlebar mounted remote control with “power in” and “power out” functions. The Tough Series winches also include a new 300 amp rated solenoid, giving maximum duty cycle to these bantam size power houses. DESCRIPTION PART NO. 2,000 lb. Tough Series UTV Winch MM-7650100 2,500 lb. Tough Series UTV Winch MM-7750105B 2,500 lb. Tough Series UTV Winch w/ Synthetic Rope MM-7753105B 3,500 lb. Tough Series UTV Winch MM-7750112B 3,500 lb. Tough Series UTV Winch w/ Synthetic Rope MM-7753112B 4,500 lb. Tough Series UTV Winch MM-7650115B Winch Mount for XUV (2007-2010) & HPX (2004-2006) MM-511831 Winch Mount for 2011 XUV 625i, 825i, 855d, 4x4 MM-511832 PE4500 4,500 LB Capacity (2041 KG) PN: MM-7650115B PRODUCT FEATURES: » » » » » » » » Fast Line Speeds Redesigned Braking Mechanism All Metal Planetary Gearing Includes both Handheld and Handlebar Controls (PE4500 hand control only) 300 Amp Rated Solenoid Center Focused Drum Free Spooling Roller Fairlead Rear Front 26 Winch Accessory Kit Quick Disconnect Wiring Kit 2” Receiver Cradle Mount 2” Receiver Winch Mount This kit includes everything that you need to push your UTV to the limits: Two powdercoated shackles, two 1” x 8’ recovery straps, a snatch block, and a pair of recovery gloves are all conveniently packaged in a durable carrying case that can be strapped and mounted virtually anywhere on your rig. Disconnecting the wiring from your winch to your UTV is a snap with our Quick Disconnect Wiring Kit. Available for the front and the rear. Move your winch from front to back or to another vehicle. The cradle mount fits a 2” receiver hitch. Compatible with 2500, 3000, 3500 lb winches. DESCRIPTION PART NO. Winch Accessory Kit MM-1900105 DESCRIPTION PART NO. Rear Quick Disconnect Wiring Kit MM-9353105 Front Quick Disconnect Wiring Kit MM-9353106 Move your winch from front to back or to another vehicle. The cradle mount fits a 2” receiver hitch. Compatible with Tough Series PE2.5, PE3.5, & PE4500 winches. DESCRIPTION PART NO. DESCRIPTION PART NO. 2” Receiver Cradle Mount MM-5106496 2” Receiver Winch Mount MM-5106595 MULTI-FIT ACCESSORIES WINCH&RECOVERY Hi-Lift UTV Jack The “Original Power Tool” of the off-road market is now available to meet the needs of the UTV market with this specialized UTV jack model. Sized perfectly for UTV operators.... off-roaders, farmers, ranchers, search and rescue personnel, and general outdoorsmen. » » » Lightweight, weighing less than 30 lbs. Special attachment: standard top clamp-clevis replaced with winch/clamp/spreader tool Available in 36” and 42” models DESCRIPTION PART NO. 36” Hi-Lift UTV Jack HL-UTV364 42” Hi-Lift UTV Jack HL-UTV424 Tube Mount for Hi-Lift™ Jack Use this tube mount to mount your Hi-Lift™ jack to your UTV! Manufactured of 6061-T6 structural aluminum and rust resistant hardware. No drilling required. DESCRIPTION PART NO. Adjustable Tube Mount 1” - 2” HL-TM700 Adjustable Tube Mount 2” - 3” HL-TM750 Neoprene Jack Cover for Hi-Lift™ Jack Off Road Base for Hi-Lift™ Jack This neoprene jack cover offers a level of mud and dirt protection for the main lifting mechanism (running gear) of the jack while stored. It is very important to keep the lifting mechanism clean, free from dirt and mud, and well lubricated. The neoprene zip-on cover greatly reduces the amount of dirt and mud that can accumulate in the working mechanism of the jack while mounted on the exterior of vehicles. This wide platform base eliminates jack sinkage on sand or soft ground. Rugged construction meets specifications for strength and durability. DESCRIPTION PART NO. DESCRIPTION PART NO. Neoprene Jack Cover for Hi-Lift® Jack HL-NJC Off Road Base HL-ORB 27 XUV & HPX GATORS CABS&ENCLOSURES Complete Cab Enclosure with Lexan Windshield » » » » » » » » » Constructed of professional grade marine textile Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant Lexan Polycarbonate is 3/16” thick and is shatter resistant, nearly bulletproof Windshield is attached using completely stainless steel hardware that will not rust Soft doors and rear window are constructed out of durable Aquaview Vinyl Design allows for easy access to the storage compartment under the hood Full length double pull YKK zippers Self-adhesive Velcro & strong rare-earth magnets combine to provide you with a custom fit Installation & care instructions included DESCRIPTION PART NO. Cab Enclosure with Lexan Windshield MS-JDXUVFC03 for 620i, 625i, 825i, 850d, 855d and HPX Cab Enclosure with Lexan Windshield for 550 MS-JD550FC03 Cab Enclosure with Lexan Windshield for 550 S4 MS-JD550S4FC03 NEW 2012 XUV 550 Enclosures (Available for 2 and 4 Passenger Models) 29 XUV & HPX GATORS Windbreak Cab with Hinged Doors » » » » » No holes to drill Hinged doors for quick entry/exit Installation is made quick and simple with illustrated instructions 16 gauge steel tube frames covered with stop rip vinyl fabric Front and rear window made of shatter resistant lexan VEHICLE TYPE PART NO. Windbreak Cab with Hinged Doors OT-60309 Complete Cab Enclosure with Vinyl Windshield » » » » » » 30 Constructed of professional grade marine textile Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant Windows are constructed out of durable Aquaview vinyl or 3/16” Lexan Polycarbonate Self-adhesive Velcro & strong rare-earth magnets combines to provide you with a custom fit Full Length double pull YKK zippers, complete with self adhesive Velcro for a hassle free installation! Doors roll back for complete ventilation and entry/exit! DESCRIPTION PART NO. Complete Cab Enclosure with Vinyl Windshield for 620i, 625i, 825i, 850i, 855d and HPX MS-JDXUVFC01 Cab Enclosure with Vinyl Windshield for 550 & 550 S4 **Call for Details** XUV & HPX GATORS Side Door & Rear Window Kit » » » » » Works with John Deere Poly Top & Factory Windshield Constructed of professional grade marine textile Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant Soft doors and rear window are constructed out of durable Aquaview vinyl Self-adhesive Velcro & strong rare-earth magnets combines to provide you with a custom fit MOST POPULAR DESCRIPTION PART NO. Side Door & Rear Window Kit for John Deere Gator 550 S4 MS-JD550S4DRW01 Side Door & Rear Window Kit for John Deere Gator 550 MS-JD550DRW01 Side Door & Rear Window Kit for John Deere Gator XUV & HPX MS-JDXUVDRW01 Soft Doors Only MS-JDXUVSDK01 Designed to work with factory canopy and windshield NEW 2012 XUV 550 Enclosures (Available for 2 and 4 Passenger Models) 31 XUV & HPX GATORS “Summer Cab” Mini Cab Enclosure with Vinyl Windshield » » » » » » Constructed of professional grade marine textile Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant Windows are constructed out of durable Aquaview vinyl Self-adhesive Velcro & strong rare-earth magnets combines to provide you with a custom fit Full Length double pull YKK zippers, complete with self adhesive Velcro for a hassle free installation! Doors roll back for complete ventilation and entry/exit! VEHICLE TYPE PART NO. “Summer Cab” Mini Cab Enclosure with Vinyl Windshield for 620i, 625i, 825i, 850d, 855d MS-JDXUVMC0101 “Summer Cab” Mini Cab Enclosure with Vinyl Windshield for 550 and 550 S4 **Call for Details** Full Cab with Lexan Windshield for Deluxe Cab » » » » » » 32 Constructed of professional grade marine textile Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant Windows are constructed out of durable Aquaview vinyl Self-adhesive Velcro & strong rare-earth magnets combines to provide you with a custom fit Full Length double pull YKK zippers, complete with self adhesive Velcro for a hassle free installation! Doors roll back for complete ventilation and entry/exit! DESCRIPTION PART NO. Full Cab with Lexan Windshield for HPX/XUV Gators with Deluxe Cab GC-JDGDXLFCL Side Doors & Rear Window Only GC-JDGDXLDRW Lexan Windshield Only GC-JDGDLXCBWS XUV & HPX GATORS CANOPIES Diamond Plate Canopy Fits: XUV 620i, 625i, 825i, 850d, 855d, HPX » » » » » » Durable metal UTV roof that won’t crack like plastic Includes a rain gutter on the roof that adds significant weather protection by helping to keep rain off your lap while riding Ability to use it as a platform! Stand on it to get a better view, to hunt, or simply reach those hard-to-reach work areas. Stainless steel hardware Doesn’t shake or rattle. Not FOPS approved VEHICLE TYPE PART NO. Polished Tread-Brite Aluminum: 620i, 625i, 825i, 850d, 855d, HPX DB-JG508R Polished Tread-Brite Aluminum: XUV 550 DB-JG512R Polished Tread-Brite Aluminum: XUV 550 S4 DB-JG512RC Tread-Brite Aluminum with Line-X Coating: 620i, 625i, 825i, 850d, 855d, HPX DB-JG508RX Tread-Brite Aluminum with Line-X Coating: XUV 550 DB-JG512RX Tread-Brite Aluminum with Line-X Coating: XUV 550 S4 DB-JG512RCX Smooth Plate Aluminum with Line-X Coating: 620i, 625i, 825i, 850d, 855d, HPX DB-JG508RSX Smooth Plate Aluminum with Line-X Coating: XUV 550 DB-JG512RSX Smooth Plate Aluminum with Line-X Coating: XUV 550 S4 DB-JG512RCSX Polished Tread-Brite Aluminum Tread-Brite Aluminum with Line-X Coating Smooth Plate Aluminum with Line-X Coating Fabric Sunshade Kit with Rear Mesh Panel Fits: XUV 620i, 625i, 825i, 850d, 855d, HPX » » » » » Constructed of 13 oz., stop-rip heavy duty vinyl Instantly removable without tools for mowing under low objects Vinyl cover slips off without disassembly for truck or trailer transport Installation is made quick and simple with illustrated instructions Will NOT fit Deluxe cab frame! DESCRIPTION PART NO. Fabric Sunshade Kit with Rear Mesh Panel - Yellow OT-30366Y Fabric Sunshade Kit with Rear Mesh Panel - Black OT-30366B Heavy Duty Fabric Sunshade Kit Fits: XUV 620i, 625i, 825i, 850d, 855d, HPX » » » Constructed of professional grade marine textile polyester Waterproof, puncture resistant, tear resistant, and abrasion resistant Complete with self-adhesive velcro VEHICLE TYPE PART NO. 620i, 625i, 825i, 850d, 855d, HPX MS-JDXUVTC01 550 MS-JD550TC01 550 S4 MS-JD550S4TC01 33 XUV & HPX GATORS “Factory Style” Fiberglass Canopy Kit Fits: XUV 620i, 625i, 825i, 850d, 855d, HPX » » » » » Fits HPX & XUV Gators with factory OPS rollbar Compatible with John Deere factory windshield and light kit Fiberglass construction with high gloss gel-coat finish Factory matching green color Front edge rain lip that directs water to the edges Available in 3 colors! DESCRIPTION PART NO. “Factory Style ” Fiberglass Canopy Kit - Green FF-DCXG “Factory Style” Fiberglass Canopy Kit - Trail Olive FF-DCXT “Factory Style” Fiberglass Canopy Kit - Black FF-DCXB “Max Shade” Fiberglass Canopy Kit Fits: XUV 620i, 625i, 825i, 850d, 855d, HPX » » » Fiberglass construction with high gloss gel-coat finish Factory matching green color Front edge rain lip that directs water to the edges Available in 3 colors! DESCRIPTION PART NO. “Max Shade” Fiberglass Canopy Kit - Green FF-DC06HPXG “Max Shade” Fiberglass Canopy Kit - Trail Olive FF-DC06HPXT “Max Shade” Fiberglass Canopy Kit - Black FF-DC06HPXB ENGINE&PERFORMANCE Standard Diesel Turbo Kit Fits: XUV 850D, XUV 855D, HPX (select models) This turbo kit has everything you need to give your UTV the boost it can handle! Make full use of your UTV’s durable hydrostatic transmission by installing this proven turbo kit. Simple bolt on installation takes only a couple of hours and increases low-end horsepower by as much as 50%. Whether your needs are for altitude compensation or just more power, this kit will make your UTV a workhorse without adverse affects on the power train. 34 DESCRIPTION PART NO. Diesel Turbo Kit - HPX (after serial number 40,000) SF-JH71010 Diesel Turbo Kit - XUV 850D SF-JX71010 Diesel Turbo Kit - XUV 855D SF-JX71015 XUV & HPX GATORS WINDSHIELDS Aero-Vented Lexan Windshield Fits: XUV 625i, 825i, 855d, 550, 550 S4, HPX » » » » » Sliding ventilation system allows users to adjust the amount of airflow for maximum comfort 1/4” think lexan polycarbonate is nearly bulletproof! Fitted using stainless steel hardware that will not rust Easy to install Comes complete with installation and care instructions VEHICLE TYPE PART NO. XUV 625i, 825i, 855d, & HPX Full Vent MS-JDXUVWD05 XUV 550 & 550 S4 Full Vent MS-JD550WD05 Adjustable Vent for Controlled Airflow Will Not Work With Deluxe Cab 35 XUV & HPX GATORS Full Length 1/4” Lexan Windshield Fits: XUV 550 and 550 S4 » » » » 1/4” Lexan to provide maximum durability Designed for easy installation and miles of care free use All clamps and screws are made with no-rust, stainless steel hardware Made in the U.S.A. DESCRIPTION PART NO. Full Length 1/4” Polycarbonate Lexan Windshield CM-JDLW1550 Full Length 1/4” Lexan Vented Windshield Fits: XUV 550 and 550 S4 » » » » 1/4” Lexan to provide maximum durability Designed for easy installation and miles of care free use All clamps and screws are made with no-rust, stainless steel hardware Made in the U.S.A. Driver and Passenger Vents Operate Independently! 36 DESCRIPTION PART NO. Full Length 1/4” Polycarbonate Lexan Windshield CM-JDLW1550 XUV & HPX GATORS Full Length Tilting Lexan Windshield » » » » » Versatile 3-position tilt mechanism permits airflow into the driver compartment 1/4” abrasive-resistant GE Lexan MR10 Extremely durable injection molded clamps All stainless steel, black coated finish hardware Easy installation Tilting Feature Allows Easy Access Under Hood DESCRIPTION PART NO. Full Tilt Lexan Poly Windshield KP-2900 Half Tilt Folding Windshield Fits: XUV 625i, 825i, 855d, HPX Fits models 2009 and newer This unique half-fixed design windshield protects you from debris and mud while providing maximum ventilation. Constructed of clear polycarbonate to prevent scratching or shattering. DESCRIPTION PART NO. Half Tilt Folding Windshield KP-2901 Rear Lexan Windshield Fits: XUV 625i, 825i, 855d, HPX » » » » » Provides an effective barrier to keep debris from entering the cab 1/8” FMR GE Lexan rear shield Extremely durable injection molded clamps All stainless steel, black coat finish hardware Easy installation DESCRIPTION PART NO. Rear Windshield Back Panel Combo KP-2902 37 T-SERIES GATORS Deluxe Fiberglass Canopy Kit » » » » » » Sturdy frame mount design Heavy-duty, powder-coated steel mounts Durable, fiberglass construction Hi-gloss, gel-coat finish with UV inhibitors Available in matching factory green Compatible with FF-DCGTW Acrylic Windshield Kit BEST SELLER DESCRIPTION PART NO. Fiberglass Canopy Kit with Steel Frame (TS, TX, TH, TE) FF-DCGT Fiberglass Canopy Kit with Steel Frame (for Original 4x2 and 6x4) FF-DC2PT Acrylic Windshield Requires Canopy (see below) » » » » Full length, golf car style windshield 1/4 inch tinted acrylic Include contoured fiberglass shroud to seal bottom of windshield to hood cowl Requires FF-DCGT or FF-DC2PT DESCRIPTION PART NO. Acrylic Windshield for John Deere TS, TX, TH, & TE Gator (Requires FF-DCGT Canopy Kit) FF-DCGTW Acrylic Windshield for John Deere Non-Current 4x2 & 6x4 Gator (Requires FF-DC2PT Canopy Kit) FF-DCFWD Side Door & Rear Window Kit Requires Canopy (FF-DCGT) and Windshield (FF-DCGTW) » » » Professional grade marine textile that is tear resistant and abrasion resistant. Roll away doors provide the option of taking your doors with you and conveniently stow-away when not in use. Professional grade marine textile polyester, self-adhesive velcro provides you with a custom fit. DESCRIPTION PART NO. Side Door & Rear Window Kit for T-Series Gators GR-JDGENCBK100 39 T-SERIES GATORS CANOPY & CAB COMPONENTS Our most versatile canopy, windshield and enclosure kits for the John Deere traditional series utility vehicles. Starting with the cab frame, add the components that best fit your environment. A. STEEL CAB FRAME NOTE: Not a Roll-Over Protection System DESCRIPTION PART NO. TS, TX, & TE Gators (2005 & newer) CM-TSTX05 TH Gators (2009 & older) CM-TH05 TH Gators (2010-2012) CM-TH10 4x2 Turf Gators (2004 & older) CM-G4X2 6x4 Gators (2004 & older) CM-6X404 B. VENTED 1/4” LEXAN WINDSHIELD » » » » » DESCRIPTION PART NO. T-Series Gators (2005 & newer) CM-LW2 T-Series Gators (2004 & older) CM-LW1 Sliding ventilation system allows users to adjust the amount of airflow for maximum comfort 1/4” think lexan polycarbonate is nearly bulletproof! Fitted using stainless steel hardware that will not rust Easy to install Comes complete with installation and care instructions PLASTIC ROOF C. ABS Requires: Steel Cab Frame DESCRIPTION PART NO. ABS Plastic Roof for T-Series Gators (requires steel frame) CM-ABS1 » » » 40 Made of durable, thermoformed ABS Plastic Easily attaches to the cab frame (not included) using included stainless steel hardware Installation instructions included T-SERIES GATORS Soft Door & Rear Panel Enclosure Requires: Cab Frame, Windshield, and ABS roof » » » Professional grade marine textile that is waterproof, puncture resistant, tear resistant, and abrasion resistant Roll away doors provide the option of taking your doors with you and conveniently stow-away when not in use. Professional grade marine textile polyester, self-adhesive velcro provides you with a custom fit unlike anything on the market. Side Door, Rear Window, Roof Enclosure Requires: Cab Frame and Windshield » » » » » Handcrafted & measured to ensure a precise fit on your Gator’s steel frame (not included) Incorporates a canopy, doors, and rear window! Professional Grade Marine Textile that is waterproof, tear resistant, and abrasion resistant Full length double pull YKK zippers Complete with self-adhesive Velcro, installation & care instructions VEHICLE TYPE PART NO. Current TS-TX-Turf MS-TT4DRD Current TH MS-TTH4 Non-Current 4x2 & Turf MS-TT4DRD Non-Current 6x4 MS-TTH4 VEHICLE TYPE PART NO. TS, TX, & Turf Gators CM-T4LEXAN TH Gators CM-TH2 Non-Current 4x2 CM-T4LEXAN Non-Current 6x4 CM-TH2 41 T-SERIES GATORS Soft Top Canopy with Rear Mesh Panel » » » Durable 16 gauge tubular steel Extremely tough, yet lightweight ripstop vinyl Black mesh rear screen DESCRIPTION PART NO. Soft Top Canopy for John Deere TX, TE, & TH with Poly Bed OT-30447Y Soft Top Canopy for John Deere 4x2, 6x4, TS, TX, TE, & TH with Steel Bed OT-9565Y “See Ya Later Alligator” Fiberglass Canopy If you want to draw attention to your business & promote selling “Gators”, this is the way to do it. Hand-built to order, with excellent attention to detail. Great for state fairs, parades, on & off site promotions. 42 DESCRIPTION PART NO. “See Ya Later Alligator” Fiberglass Canopy FF-DCUL8R T-SERIES GATORS Hardtop Cab Enclosure with Glass Windshield & Manual Wiper Fits: 2003 & Older 4x2 & 6x4 » » » » No holes to drill Hinged doors for quick entry/exit Installation is made quick and simple with illustrated instructions 16 gauge steel tube frames covered with stop rip vinyl fabric DESCRIPTION PART NO. Hardtop Cab Enclosure with Glass Windshield & Manual Wiper OT-40166 Cargo Bed Cover Enclosure » » » » Made of durable stop-rip vinyl fabric Fits 44” L x 49” W bed size 27” from bed floor to top of cover DOES NOT WORK WITH POLY BED DESCRIPTION PART NO. Cargo Cover Enclosure for John Deere Gator 4x2 with Steel Bed OT-60097 Cargo Cover Enclosure for John Deere Gator 6x4 with Steel Bed OT-60090 Polypropylene Storage Cover » » » » » » » » Durable 100% Polypropylene Easy on - easy off Convenient drawstring Ideal for indoor and outdoor storage Repels water and resists damaging UV rays Won’t stretch or shrink Extremely breathable (allows air to circulate and keeps moisture out) Mold and mildew resistant DESCRIPTION PART NO. Polypropylene UTV Storage Cover OT-9985 43 PROGATOR Fiberglass Canopy Kit for ProGator » » » Heavy-duty, powder coated steel mounting system Rubber isolator pads eliminate vibration noise Fiberglass construction with high gloss gel-coat finish DESCRIPTION PART NO. Fiberglass Canopy Kit for ProGator FF-DCPRO Acrylic Windshield Kit Requires FF-DCPRO canopy kit » » Heavy duty steel frame construction 3/16” Acrylic windshield with slight tint to reduce glare VEHICLE TYPE PART NO. Acrylic Windshield Kit FF-DCPROW Actual tint is lighter than shown See FF-DCGTW on page 39 for reference Full Cab Enclosure with Vinyl Windshield Requires FF-DCPRO canopy kit » » » » » » » » Constructed of professional grade marine textile Waterproof, puncture resistant, tear resistant, fade resistant, and abrasion resistant Soft doors and rear window are construct out of durable Aquaview Vinyl Doors roll away to provide for easy storage when not in use Design allows for easy access to the storage compartment under the hood Full length double pull YKK zippers Self-adhesive Velcro & strong rare-earth magnets combine to provide you with a custom fit Installation & care instructions included VEHICLE TYPE PART NO. Full Cab Enclosure with Vinyl Windshield - Black GR-JDGPROTENCBK Full Cab Enclosure with Vinyl Windshield - Yellow GR-JDGPROTENCYL 45 TRACTORS AUDIO Roof Mount Audio Console Fits: Tractors with a Canopy » » » » » » Marine waterproof retractable cover protects the DEH Pioneer CD Player MP3/WMA/MAV playback with volumen and memory settings Connect your portable devices directly through the front AUX input Optional high intensity domelight option Includes a high quality AM/FM antenna. WR85B marine speakers are water, UV, and corrosion resistant and have a one piece molded grill for speaker protection and durability. DESCRIPTION PART NO. Roof Mount Audio Console - Standard (Black) TT-RMT Roof Mount Audio Console - Standard (Camo) TT-RMTC Roof Mount Audio Console - Standard (Carbon Finish) TT-RMTCF Roof Mount Audio Console - Dome Light (Black) TT-RMTD Roof Mount Audio Console - Dome Light (Camo) TT-RMTDC Roof Mount Audio Console - Dome Light (Carbon Finish) TT-RMTDCF Roll Bar Mount Audio Console Fits: Tractors with ROPS system » » » » » » » » » Fits roll bars and R.O.P.S. size widths from 2 to 3 inches (round or square). Includes a high quality AM/FM antenna. WR85B Marine speakers are water, UV, and corrosion resistant and have a one piece molded grill for speaker protection and durability. The DEH Pioneer is a 50 watts x (4) 200 total watts MOSFET CD player with AM/FM tuner and 3 band equalizer. MP3/WMA/WAV playback with volume and memory settings. Connect your portable devices directly through the front AUX input. Card Remote Control. Detachable Face Security. Overall dimensions: 24 L x 7.5 W x 8.75 H (in) DESCRIPTION PART NO. Roll Bar Mount Audio Console - Standard TT-MAC2900 Roll Bar Mount Audio Console - with PTO Working Lights TT-MACPTO Roll Bar Mount Audio Console - with Rear Working Lights TT-MACCRW Roll Bar Mount Audio Console - with PTO Worklight Kit and Rear Worklight Kit TT-MACRWPTO Tread-Brite Heavy-Duty Diamond Plate Canopy CaNOPIES 1900 Series » Adjustable frame with rails that slide in and out to adjust to different models » U2x3 brackets adjust to the different degree of angle » Overall size is 45” x 57” » Not FOPS approved 2000 Series » Overall size is 57” x 66” » Not FOPS approved DESCRIPTION PART NO. 1900 Series TX-AU19002X3 2000 Series TX-AU20002X3 47 TRACTORS Fiberglass Canopy Kit - “N” Series Top-off your tractor, with our best selling fiberglass sunshade. Available in 3 sizes to fit mowers, compact, utility & ag tractors, with a variety of mounting brackets. Durable construction for long lasting coverage...plus it looks great on your tractor! » » » » » » Hi-gloss gel-coat finish with UV inhibitors Multi-directional ribs provide structural strength Simple, adjustable mounting system Includes heavy-duty powder coated mounting brackets Brackets allow fore-aft, vertical and pitch adjustments Item No: See below Each item number can be broken down into three components: TS Canopy No. NX: 45” W x 47” L N1: 45” W x 58” L N2: 52” W x 66” L N1 G 32 Color G: JD Green Bracket & Hardware Kit 22: 1 series, 2000 series, 997 mower 32: 3000-5000, 70, 90 series 67: 6000/7000 series BEST SELLER Fiberglass Canopy Kit - “D” Series The D-Series sunshades are our top of the line canopies for tractors. The innovative “hump”, allows you to lower the sunshade closer to you by pushing the rollbar up inside the “hump”. » » » » » » Fiberglass Canopy Kit Traditional “TracTop” Style The brand “TracTop” has been a leader in manufacturing canopies since 1983. This traditional design is still available and compliments older style tractors. » » » » Durable fiberglass construction Includes adjustable, heavy-duty, powder coated steel mounting brackets Hi-gloss gel-coat finish available in factory matching colors with UV inhibitors One inch “drip rail” around edge of sunshade that diverts morning dew and rain to the rear corners » Wood reinforced “stringers” run the length of the sunshade for added structural strength » Rubber isolation pads eliminate vibration » Available in 4 sizes » ”S” Canopy - 47” W x 54” L » “L” Canopy - 47” W x 63” L: Fits narrow-vineyard tractors with mid-mount ROPS » “M” Canopy - 54” W x 63” L »“W” ‘Wedge” Canopy - Specifically for older 10, 20, 30 series tractors. 48 DESCRIPTION PART NO. Fiberglass Canopy Kit -Traditional Style “TracTop” Call for Part # Includes adjustable, heavy-duty, powder coated steel mounting brackets Hi-gloss gel-coat finish available in factory matching colors with UV inhibitors One inch “drip rail” around edge of sunshade that diverts morning dew and rain to the rear corners Wood reinforced “stringers” run the length of the sunshade for added structural strength Rubber isolation pads eliminate vibration Available in 3 sizes » ”D3” Canopy - 44” W x 55” L x 8” D » “D4” Canopy - 49” W x 57” L x 9” D » “D6” Canopy - 54” W x 63” L x 11” D DESCRIPTION PART NO. Fits 1 Series, 2000 Series and mowers with 2” x 2” ROPS FF-D3A22 Fits 3000 Series and mowers with 3” x 2” ROPS FF-D3A32 Fits 3000-5000 Series FF-D4 Fits 6000-7000 Series FF-D6 TRACTORS ABS Plastic Hardtop Canopy » » » » » » Fits most machines with a vertical 2x2 or 2x3 ROPS bar system 3/16 ABS plastic top (available in green, black or white) Powder coated steel frame Measures---40 5/8” L x 35 1/4” W x 4 1/8” D Easy on & off after initial installation Additional support brackets available for commercial use DESCRIPTION PART NO. Hardtop ABS Plastic Canopy (Black) OT-30382B Hardtop ABS Plastic Canopy (White) OT-30382W Hardtop ABS Plastic Canopy (Green) OT-30382G Guardian Tractor Canopy with Universal Mounting Kit » » » » » » Factory matching green powder coat finish 1/4” overhead asphault sheeting insulation 3/16” steel universal mounting system Heavy duty 18 gauge steel construction Available in 2 sizes to fit all tractors & mowers NOTE: this canopy is NOT FOPS approved DESCRIPTION PART NO. Guardian Tractor Canopy (45” x 48” Green Steel) PC-610348G Guardian Tractor Canopy (45” x 58” Green Steel) PC-610356G Guardian Tractor Canopy (45” x 48 Tread Bright Aluminum) PC-618048G Guardian Tractor Canopy (45” x 58” Tread Bright Aluminum) PC-618056G Soft Top Sunshade Kit Stay cool while you work and protect yourself from harmful UV rays. Affordable soft top, vinyl sunshade that is perfect for seasonal use. » » » » Mounts to 2x2 or 2x3 ROPS systems with a max. width of 34” Heavy duty, 13 oz stop-rip vinyl top On/Off in seconds after initial installation Rough measurements - 35” W x 46” L DESCRIPTION PART NO. Soft Top Sunshade Kit (Yellow) OT-30400Y “RagTop” Fabric Sunshade Kit Easy-on, easy-off fabric canopy without spending a lot of money. Perfect for seasonal use on tractors and mowers. » » » » » Heavy duty marine grade fabric 7/8” bright anodized aluminum frame Fits rollbars 24” - 38” wide Allows for adjustments: 20 degree rear and 10 degree forward pitch Dimensions: 38” W x 48” L DESCRIPTION PART NO. “RagTop” Fabric Sunshade Kit FF-RTFF100 49 TRACTORS Enclosures These vinyl tractor cabs are an excellent alternative to expensive hard cabs. Simply install over the top of a pre-existing canopy. The cleanable, durable materials will give you many years of protection from the elements. » » » » » » » » 138 bonded thread creates very strong seams Optically clear vinyl (scratch resistant coating) Water proof durable fabric Sliding side doors easily open for side to side ventilation Front and rear windows include zippers to create front to back ventilation No drilling holes required for installation Requires canopy, either aftermarket or OEM Comes with FREE storage bag! How to Order Your Cab Enclosure STEP 1 Determine the canopy you have NOTE: If you do not have a canopy, we recommend the “N1” canopy. (see pg. 48) OEM LVP25334 Plastic N-Series Fiberglass D-Series Fiberglass Tel-Trax Fiberglass 1200, 1900, 2000 STEP 2 Define Year, Make, & Model STEP 3 Fixed or Folding Rollbar? STEP 4 Measure Top of Fender to Top of Rollbar STEP 5 NOTE: 5000 Series have (4) fender types. Please specify standard, black plastic flared, hi-crop, or wide metal when ordering 50 Choose your color: TRACTORS Hardtop Cab for John Deere Tractors Winter chores are hard enough without risking frostbite to do the job. Our hard top cabs keep you out of the wind, blowing snow, rain, and sleet that make winter tractor operation miserable! Shown on John Deere 2320 These cabs are composed of 16 gauge steel tube frames, covered with an extremely strong, yet light weight ripstop vinyl fabric that resists abrasion, water, fire, mildew, and rot. Window material is non-puckering, shatter resistant lexan, that can sustain sub-zero temperatures without cracking. Top is made of molded ABS Plastic with UV inhibitor for durability and appearance » » » » » No holes to drill! Forward inclination of windshield minimizes glare and contact with falling snow and rain Installation is made quick and simple with illustrated instructions. Removal and re-assembly is simple from season to season Hinged, wire frame door VEHICLE TYPE PART NO. 4100 & 4110 (will not fit 4115) OT-11023 790 & 3005 OT-11137 1023e & 1026r OT-11845 2210 & 2305 compacts OT-11326 2320 Compact OT-11670 2520 & 2720 Compact OT-11746 4200, 4300, 4400 *includes glass windshield & electric wiper OT-40121 3120, 3320, 3520, 3720 *includes glass windshield & electric wiper OT-40291 Hinged Doors!! Cab Options & Accessories Glass Windshield Electric Wiper Kit Work Light Kit Rear Mirror Kit Caution Light OT-10120 OT-10122 OT-11560 OT-11133 OT-9855 51 TRACTORS HEAT&AIR BEST SELLER 12 Volt Ceramic Heater » » » » » 300 Watts, 12 Volt 15 Amp rating 12 Gauge 15’ power cord 3 speed adjustable fan Direct hook up to your battery 12 Volt Metal Fan DESCRIPTION PART NO. 12 Volt Ceramic Heater RP-681 See page 20 for more Lighting! DESCRIPTION PART NO. 12 Volt Metal Fan RP-1179 LIGHTING LED Dually - Single LED Dually - Double (Pair) Rollbar Mounted Light Bracket » » » » » » » » » » 52 » 2 Speed Metal Fan » 7’ power cord » Mounts to any flat surface » Ball swivel base allows for adjustment 4 LED lights in a compact package Small 3” - 3” dimension, this light can fit anywhere 1.1 Amps 15 watts 1300 Lumens 4 LED lights in a compact package Small 3” - 3” dimension, this light can fit anywhere 1.1 Amps 15 watts 1300 Lumens Heavy duty, steel construction Rock-hard, black powder coated finish Durable 1/2” u-bolt for steady mount Includes hardware for 3” x 2” ROPS DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. LED Dually - Single (Flood Pattern) KP-97905 LED Dually - Double (Flood Pattern) KP-97910 Rollbar Mounted Light Bracket TS-RLB LED Dually - Single (Spot Pattern) KP-97906 LED Dually - Double (Spot Pattern) KP-97911 TRACTORS STORAGECOVERS Protect Your Investment Your tractor is an investment...finally you have a way to protect it! Save your paint, seat & operator compartment from the damaging effects of sun and rain. Our unique zippered design allows you to use the cover with or without the front loader bucket. The included bag attaches to the roll bar for easy access and storage. Heavy duty, 100% polyester, solution dyed fabric repels water without staining your tractor. Custom sewn to fit your tractor. Storage Bag The included storage bag comes with a conveniently attached strap and Velcro system which can mount on the upper portion of the ROPS bar or on each side of the ROPS bar directly behind the seat. The straps clip to a plastic buckle on the strap and can be tightened by pulling the strap that comes through the male portion of the buckle. The zipper in the top portion of the bag is covered with a flap that helps to seal out any rain or snow to keep the cover as dry as possible when not in use. Make sure you only store a dry cover so not to induce any moisture that may mildew in a closed storage bag. Simplified Attachment The full tractor cover is held in place by elastic in the bottom hem of the cover. The elastic hooks together under the three point hitch or any rear implement that is on the tractor. Fits on tractors with or without a loader. The loader and roll over protection bars extend out of the cover through openings which zip and/or Velcro together around those openings. Water Repellency The fabrics we use are the right mix between water repellency and breathability. Tested for over 20 years in the cover market, our fabrics withstand the elements and offer enough breathing to minimize mold and mildew. In addition, the perimeter of the cover allows air circulation for added breathability. How to Order STEP 1 Specify Year, Make, & Model STEP 2 Provide the following answers: Do you have a front end loader? (Y or N) Do you have a grille guard? (Y or N) Do you have front weights? (Y or N) Do you have an exhaust stack? (if yes, is it on the left or right) STEP 3 Measure maximum width at rear tires STEP 4 Measure maximum length minus the loader STEP 5 Choose color Silver Grey Charcoal Grey 53 LAWN TRACTORS CAB ENCLOSURES & CANOPIES Hardtop Cab Winter chores are hard enough without risking frostbite to do the job. These hard top cabs keep you out of the wind, blowing snow, rain, and sleet that make winter tractor operation miserable! Composed of 16 gauge steel tube frames, covered with an extremely strong, yet light weight ripstop vinyl fabric that resists abrasion, water, fire, mildew, and rot. Window material is non-puckering, shatter resistant lexan, that can sustain sub-zero temperatures without cracking. Top is made of molded ABS plastic with UV inhibitor for durability and appearance. » » » » BEST SELLER No holes to drill Forward inclination of windshield minimizes glare and contact with falling snow and rain Installation is made quick and simple with illustrated instructions Removal and re-assembly is simple from season to season VEHICLE TYPE PART NO. 425, 445, 455 OT-11041 325, 335, 345,355D, GX300 OT-11082 LX280, LX289, GT225, GT235, GT245, GX255 *will NOT fit GT242, GT262, or GT275 OT-11105 316 (Onan) & 318 OT-11299 X-300 Series: X300, X304, X320, X324, X340, X360 OT-11577 X-500 Series: X500, X520, X530, X534, X540 OT-11606 2320 Compact OT-11670 Cab Options & Accessories Glass Windshield Electric Wiper Kit Work Light Kit Rear Mirror Kit Caution Light OT-10120 OT-10122 OT-11560 OT-11133 OT-9855 Soft Top Sunshade Constructed of ripstop heavy duty vinyl, this sunshade is not only affordable, it’s also durable. Tool-free installation and removal after initial installation, keeps you mowing even under low branches. All standard sunshades come with a FREE rear screen panel. Stay cool while you work and protect yourself from UV rays. » » » » Receivers attach to tractor using existing bolts to avoid drilling Instantly removable without tools for mowing under low objects Vinyl cover slips off without disassembly for truck or trailer transport Installation is made quick and simple with illustrated instructions DESCRIPTION PART NO. 316 (Onan) & 318 OT-9401Y 425, 445, 455 OT-9433Y 240, 245, 260, 265, 285 OT-9440Y 325, 335, 345, 355D, GX300 OT-9440Y LT133, LT150, LT155, LT160, LT166, LT170, LT180, LT190 OT-30077Y LX280, LX289, GT225, GT235, GT245, GX255 *will NOT fit GT242, GT262, or GT275 OT-30104Y 400, 500, 700 “X” Series (BM 20482) X465, X475, X485, X495, X575, X585, X595, X700, X720, X728 OT-30160Y LX255, 266, 277 AWS, 279 AWS, 288 OT-30160Y 100 Series: 102, 115, 125, 135, 145, 155C, 190C OT-30212Y L100, L108, L111, L118, L120, L130, LA100, LA110, LA120, LA130, LA140, LA150 OT-30212Y 55 LAWN TRACTORS LAWN SWEEPERS Our lawn sweepers are the highest quality, most feature rich lawn sweepers in their class. Featuring extra large capacity hopper bags of 18-26 cubic feet capacity for less time spent emptying. The extra wide chute area is 33% larger than the competition and virtually eliminates clogging. High density brushes are extremely effective at collecting leaves, grass, pine needles, most types of nuts and other lawn debris. Our “no-slip” height adjustment has easy to remember positive-lock height settings that will not vibrate out of position. Heavy duty polyester hopper has reinforced edges and collapses for convenient storage. 50” Pro Spiral Sweep 42” Pro Straight Sweep » » » » » » » » 50” sweeping path 26 cu. ft. capacity 11” polypropylene brushes Steel ball bearings on brush axle 42” sweeping path 18 cu. ft. capacity 11” polypropylene brushes Steel ball bearings on brush axle DESCRIPTION PART NO. DESCRIPTION PART NO. 50” Pro Spiral Sweep OS-50SWP26 42” Pro Straight Sweep OS-42LS MAINTENANCE LIFTS Lifts lawn and garden tractors, residential and commercial zero turn mowers for easy cleaning and maintenance. Lawn & Garden Tractor Lift » » » » Access and clean underside of mower decks Change and service belts and blades Change and service tires 10” 2-Ply pneumatic tires DESCRIPTION PART NO. Lawn & Garden Tractor Lift OS-TL4000 Commercial Zero-Turn Mower Lift 56 DESCRIPTION PART NO. Commercial Zero Turn Mower Lift OS-TL4500 LAWN TRACTORS LOADING RAMPS Our industry leading loading ramps feature solid body construction with a punched tread pattern for superior traction over rung style ramps. Our ramps are perfect for loading lawn and garden tractors, UTVS, and even small wheeled items such as power washer and generators. Patented overlapping hinges provide added structural support, allowing for high load capacities of up to 2000 lbs. distributed weight per set. Arched ramps allow loading of low ground clearance items such as lawn tractors, and fold for convenient storage. Telescoping ramps are perfect for UTVs and motorcycles and store easily underneath. All models include Cam Buckle Tie-down straps to easily secure ramps to truck tailgate. 800 Lb. Steel Ramps 1200 Lb. Steel Ramps 1500 Lb. Aluminum Ramps » » » » » » » » » » » » » » » » » » 84” x 10.5” x 2” (each) 84” in open position, 63.5” in folded 16 gauge steel 800 lb capacity (400 lb per ramp) Cam buckle tie down included Weighs 71 lbs. 84” x 10.5” x 2” (each) 84” in open position, 63.5” in folded 16 gauge steel 1200 lb capacity (600 lb per ramp) Cam buckle tie down included Weighs 71 lbs. 84” x 10.5” x 2” (each) 84” in open position, 63.5” in folded 12 gauge aluminum 1500 lb capacity (750 lb per ramp) Cam buckle tie down included Weighs 49 lbs. DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. 800 Lb. Steel Ramps OS-1084D 1200 Lb. Steel Ramps OS-1084C 1500 Lb. Aluminum Ramps OS-1084A Simple Folding Design 625 Lb. Telescoping Ramp 2000 Lb. Steel Ramps » » » » » » » » » » » » Telescopes to 4 different lengths with the push of a button: 55”, 65”, 75”, 85” Storage length: 48” 11 gauge aluminum Nylon carry strap Cam buckle tie down included Weighs 23 lbs. 84” x 14.5” x 2” (each) 84” in open position, 63.5” in folded 14 gauge steel 2000 lb capacity (1000 lb per ramp) Cam buckle tie down included Weighs 83 lbs. DESCRIPTION PART NO. DESCRIPTION PART NO. 625 Lb. Telescoping Ramp OS-1084TR 2000 Lb. Steel Ramps OS-1084 Superior Solid Body Design 57 LAWN TRACTORS STEEL CARTS Our poly dump carts are available in different models and load capacities to handle a wide range of applications. All of our poly dump carts feature sloped backs and a single lever dump latch for easy loading and unloading. Our poly dump carts can be pulled with any lawn and garden tractor, zero turn mower or ATV-UTV with a rear hitch. Flatbed Cart » » » » » Knock-Down Steel Cart 34” W x 48” L x 2” H 14 gauge steel frame Expanded metal bed 1000 lb. capacity 18 x 9.5 x 8 UTV tires » » » » » 30” W x 48” L x 12” H 18 gauge steel Removable tailgate 1000 lb. capacity, 12 cu. ft 16 x 6.5-8 tires 10 Cu. Ft. Welded Steel Cart » » » » » 30” W x 48” L x 12” H 18 gauge steel Removable tailgate 1000 lb capacity, 12 cu ft. 18 x 9.5 x 8 UTV tires DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. Flatbed Cart OS-FBATV Knock-Down Steel Cart OS-3048HKDATV 10 Cu. Ft. Welded Steel Cart OS-3048HATV 3-Way Hitch Adapter » » » » 58 Use with ball or pint hitch Welded tow ring Raise or lower hitch height 2” 3/4” ball not included DESCRIPTION PART NO. 3-Way Hitch Adapter OS-3WHITCH 17 Cu. Ft. Welded Steel Cart Ball Hitch Conversion Kit » » » » » » » » » » 34” W x 60” L x 15” H Weight capacity 1500 lbs. 16 gauge welded cart body 18 x 0.5 x 6 UTV wheels Pin hitch included Weighs 225 lbs. DESCRIPTION PART NO. 17 Cu. Ft. Welded Steel Cart OS-3460HATV Converts pin hitch to ball hitch Galvanized steel coupler Fits 1 7/8” trailer ball (not incl.) DESCRIPTION PART NO. Ball Hitch Conversion Kit OS-HK178 LAWN TRACTORS POLY CARTS Our poly dump carts are available in different models and load capacities to handle a wide range of applications. All of our poly dump carts feature sloped backs and a single lever dump latch for easy loading and unloading. Our poly dump carts can be pulled with any lawn and garden tractor, zero turn mower or ATV-UTV with a rear hitch. 500 Lb. Capacity Poly Cart » » » » 750 Lb. Capacity Poly Cart 30.5” W x 41” L x 30.5” H 10 cubic feet 5/8” dia. axle 16” pneumatic turf tires » » » » » 650 Lb Capacity Poly Cart 48.25” W x 39” L x 13.75” H Weight capacity 750 lbs. 3/4” solid steel axle 15” pneumatic turf tires Weighs 84.5 lbs. » » » » 30” W x 49” L x 11” H 10 cubic feet 3/4” solid steel axle Weighs 63 lbs. DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. 500 Lb Cap. Poly Cart KP-86350 750 Lb Cap. Poly Cart OS-4048P 650 Lb Cap. Poly Cart OS-3040P Build-It Yourself Accessories Customize your cart with these unique features: » » » Stake pockets Divider slots Ledge for 2nd level 12.5 Cu. Ft. Swivel Dump Poly Cart » » » » » » Hybrid cart for lawn & garden tractors and UTVs 48.25” W x 39” L x 13.75” H Weight capacity 1250 lbs. Pass through axle w/ swivel dump capacity Multi hitch function for pin, 1 7/8” and 2” ball Weighs 110 lbs. DESCRIPTION PART NO. 12.5 Cu. Ft. Swivel Dump Poly Cart OS-4048 PHYB 59 LAWN TRACTORS LAWN ROLLERS During winter and early spring, lawns can become severely damaged by the freezing and thawing of soil. Moles and ants can cause additional damage. Our lawn rollers will help your lawn regain the smooth, professionally groomed appearance that makes your lawn the envy of the neighborhood. Our lawn rollers feature rounded ends that are gentler on turf and easier to turn. All other models on the market have extended edges that can damage turf when turning. Featuring attractive and durable power coat finish that resists scratches and weather damage as well as a heavy-duty drawbar for years of worry free use. 400 Lb Steel Roller 600 Lb Steel Roller 915 Lb Steel Roller 1150 Lb Steel Roller » » » » » » » » » » » » » » » » 18 dia. x 36” L 14 gauge steel 40 gallon capacity Weight with water 400 lbs 24 dia. x 36” L 14 gauge steel 71 gallon capacity Weight with water 600 lbs 24 dia. x 48” L 13 gauge steel 94 gallon capacity Weight with water 915 lbs 24 dia. x 60” L 11 gauge steel 117 gallon capacity Weight with water 1150 lbs DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. 400 Lb Steel Roller OS-9W 600 Lb Steel Roller OS-10T 915 Lb Steel Roller OS-48T 1150 Lb Steel Roller OS-60T LAWN AERATORS Our state of the art core aerator pulls out 8 plugs per square foot as recommended by university turf care programs. Gentler and more effective than standard tow-behind aerators, the springs allow the tines to reciprocate creating more defined holes in the turf that emulates the action of powered aerators. Our spike aerators provide an easy and effective way to aerate throughout the season. These aerators feaure innovative spring dividers between the heavy duty spike discs to minimize possible damage from rocks and roots. 60 48” Pro Core Plug 42” Core Plug 36” Spiker Hand Spiker » » » » » » » » » » » » » » » » 48” Coring Path 40 Core Pts., 2.5” depth Tray holds 200 add’l lbs 10 x 3.5 pneumatic turf tires Foot lever engage-disengage 32” Coring Path 32 Core Pts., 2.5” depth 4.10 x 3.50-4 pneumatic turf tires 18 spike discs 14 gauge steel 36” spiking width 6” dia. transport wheels 8 spike discs 9.5” dia. spike discs 14 gauge steel 14” spiking width DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. 48” Pro Core Plug OS-48CP 42” Core Plug OS-42CP 36” Spiker OS-36HW Hand Spiker OS-8 ZERO-TURN MOWERS 61 ZERO-TURN MOWERS CANOPIES N1 Fiberglass Canopy Kit (45” x 58”) » » » » » High gloss gel-coat finish with UV inhibitors Factory matching color Front & rear reflectors standard Heavy duty, powder coated steel mounting brackets Rubber isolator pads float the canopy in rubber to eliminate vibration noise VEHICLE TYPE PART NO. Mowers with 2” x 2” Forward Leaning ROPS TS-N1GZ22 Mowers with 3” x 2” Forward Leaning ROPS TS-N1GZ32 7000/7500 Precision Cut and 7500/8500 E-Cut Hybrid TS-N1GF23 8000E Hybrid Fairway & 1600T WAM TS-N1GZ32 Mowers with Vertical 2” x 2” Rollbar (i.e. 997) TS-N1G22 Includes Brackets & Hardware NX Fiberglass Canopy Kit (45” x 47”) » » » » » High gloss gel-coat finish with UV inhibitors Rubber isolator pads float the canopy in rubber to eliminate vibration noise Heavy duty, powder coated steel mounting brackets Front & rear reflectors standard Factory matching color VEHICLE TYPE PART NO. Mowers with 2” x 2” Forward Leaning ROPS TS-NXGZ22 Mowers with 3” x 2” Forward Leaning ROPS TS-NXGZ32 Mowers with 2” x 2” Vertical ROPS (i.e. 997) TS-NXG22 “RagTop” Fabric Sunshade Kit Easy-on, easy-off fabric canopy without spending a lot of money. Perfect for seasonal use on tractors and mowers. » » » » 62 Heavy duty marine grade fabric 7/8” bright anodized aluminum frame Fits rollbars 24” - 38” wide Allows for adjustments: 20 degree rear and 10 degree forward pitch DESCRIPTION PART NO. “RagTop” Fabric Sunshade Kit TS-RTFF100 ZERO-TURN MOWERS Hardtop ABS Plastic Canopy Fits: Z-Trac with folding ROPS » » » » Available in White, Green, or Black Installation is made quick and simple with illustrated instructions Removal and re-assembly is simple from season to season ABS top dimensions: 35 1/4” W x 40 5/8” L VEHICLE TYPE PART NO. Hardtop ABS Plastic Canopy for Zero-Turn Mowers with a 2” x 2” or 2” x 3” ROPS - Green OT-30382G Soft Top Sunshade Fits: Z225, Z245, Z425, Z445, Z465 (2007-2010) Constructed of ripstop heavy duty vinyl, this sunshade is not only affordable, it’s also durable. Tool-free installation and removal after initial installation, keeps you mowing even under low branches. All standard sunshades come with a FREE rear screen panel. Stay cool while you work and protect yourself from UV rays. » » » » Receivers attach to tractor using existing bolts to avoid drilling Instantly removable without tools for mowing under low objects Vinyl cover slips off without disassembly for truck or trailer transport Installation is made quick and simple with illustrated instructions VEHICLE TYPE PART NO. EZtrak 2010 and earlier OT-30340 EZtrak 2011 and newer OT-30468 Z-Trac with folding ROPS: 2” x 2” Max. width = 32” OT-30269 Easy-On Easy-Off 63 LAWN TRACTORS Roof Mount Audio Console Fits: Tractors with a Canopy » » » » » » Marine waterproof retractable cover protects the DEH Pioneer CD Player MP3/WMA/WAV playback with volumen and memory settings Connect your portable devices directly through the front AUX input High intensity domelight option Includes a high quality AM/FM antenna. WR85B marine speakers are water, UV, and corrosion resistant and have a one piece molded grill for speaker protection and durability. DESCRIPTION PART NO. Roof Mount Audio Console - Standard (Black) TT-RMT Roof Mount Audio Console - Standard (Camo) TT-RMTC Roof Mount Audio Console - Standard (Carbon Finish) TT-RMTCF Roof Mount Audio Console - Dome Light (Black) TT-RMTD Roof Mount Audio Console - Dome Light (Camo) TT-RMTDC Roof Mount Audio Console - Dome Light (Carbon Finish) TT-RMTDCF AUDIO Amplified Sound Wedge » » » » » » Powerful 100 watt built in amplifier 12’ Aux cable works with any iPod/MP3 12’ power cord plugs into 12 volt plug (2) marine grade 6.5” woofers/mid-range speakers and (2) tweeters Mounts to any roof, or 1.5” - 2” roll bars Separate docking station for iPod/MP3 DESCRIPTION PART NO. Amplified Sound Wedge VDP-4035A Roll Bar Mount FREE Docking Station (iPod/MP3 player not included) TO Roof Mount See page 20 for more Lighting! LIGHTING LED Dually - Single LED Dually - Double (Pair) Rollbar Mounted Light Bracket » » » » » » » » » » 64 TO 12V 4 LED lights in a compact package Small 3” - 3” dimension, this light can fit anywhere 1.1 Amps 15 watts 1300 Lumens 4 LED lights in a compact package Small 3” - 3” dimension, this light can fit anywhere 1.1 Amps 15 watts 1300 Lumens Heavy duty, steel construction Rock-hard, black powder coated finish Durable 1/2” u-bolt for steady mount Includes hardware for 3” x 2” ROPS DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. LED Dually - Single (Flood Pattern) KP-97905 LED Dually - Double (Flood Pattern) KP-97910 Rollbar Mounted Light Bracket TS-RLB LED Dually - Single (Spot Pattern) KP-97906 LED Dually - Double (Spot Pattern) KP-97911 NOTES NOTES _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ 65 TERMS & CONDITIONS Acceptance & General Policy: Returns: • • • • • WiedmannBros only accepts orders from authorized or franchised dealers. We do not engage in retail sales and reserve the right to qualify any account seeking to purchase from our print or online catalogs. All orders are subject to acceptance at Wiedmann Bros. Distributing Co., LLC. Most products are in stock and ready to ship, however some products are hand made to order, and require extended lead times. Upon ordering, we will do our best to advise you of any related lead time. Terms: • • • • Dealers desiring an open account should request an application form and allow 7-10 days for processing. Net 30: Open accounts are due 30 days from shipment. Interest will be charged on past due balances at a rate not to exceed the applicable state legal maximum. All sales are final on discontinued and closeout items. Accounting: • Questions regarding invoices or statements should be directed to our Accounting Department at: [email protected] Service: • • Prompt service is of primary consideration. Every effort will be made to ship your order in the fastest & most economical methods Prices: • • • • All prices are subject to change without notice Prices do not include any special handling charges Materials and specifications for all products are subject to change without notice All prices quoted are USD ($) Minimum Order: • • A minimum order of $50 net is required All net orders less than $50.00 may be assessed a $5.00 processing fee • • • • • • • • • • • • Disclaimer: • • • Orders for in-stock items can be cancelled for any reason prior to shipping Shipped items are subject to a 15% restocking fee, and applicable shipping charges • • Manufacturer’s Direct Warranty: • • All items are warrantied directly by the manufacturer. All warranty items must be returned directly to the manufacturer (not Wiedmann Bros.) after having obtained a RMA number from that manufacturer. Wiedmann Bros. will not deviate from this printed program Anything agreed upon that is not documented on this program will not be honored by Wiedmann Bros. Any additions or changes will require a revised program sheet. General Provisions: Cancellation Policy: • • A Wiedmann Bros Return Merchandise Authorization (RMA#) number must accompany all returns. Do not return merchandise without a Return Merchandise Authorization. Products returned without a RMA# will be held or refused and directed back to the dealer Returns must be shipped according to the instructions of a Wiedmann Bros. customer service representative The Wiedmann Bros invoice number and the date the product was purchased must accompany all returns Shortage claims against any purchase order will be considered only if reported within seventy-two (72) hours of receipt of merchandise All defective merchandise must be returned prepaid. If found to be a manufacturing defect, credit for freight will be issued Any non-custom product approved for return as a “customer convenience return” is subject to a 15% restocking charge and must be accompanied by an order of equal or greater value. The returned merchandise must also be re-sellable Damaged or used products not subject to warranty will be returned to the dealer freight collect Closeout and discontinued products will not be accepted for return or credit unless they were mis-shipped or covered by warranty Packages received without meeting the above guidelines will be refused and returned unopened Used fuel containers cannot be returned due to hazardous waste restrictions Custom soft goods are not returnable Items returned in new condition with marked or damaged packaging that is not saleable will be subject to a repackaging fee of up to 35% • • • These terms govern all our sales and may not be changed except with our written consent. Failure to return goods within 30 days of invoice date shall constitute acceptance by you of these terms, notwithstanding contrary terms in any purchase order submitted to Wiedmann Bros. Wiedmann Bros. makes no warranty as to the products distributed by us, express or implied, including without limitation any warranties or merchantability and fitness for a particular purpose. Wiedmann Bros. will however, pass on all warranties made by the manufacturer, who has sole responsibility for performing such warranties. If a dealer returns an item to Wiedmann Bros. for warranty issues and the item is warranted directly by the manufacturer, the item will be returned to the dealer. The manufacturer shall be solely responsible for any damage to person or property arising from the design, manufacture and testing of its products, and Wiedmann Bros. accepts no liability for such damages. Wiedmann Bros. shall not be liable for indirect or consequential damages. If legal action is used to collect a past due account, the prevailing party shall be entitled to its attorney’s fees and costs in addition to any other relief it may receive. Disclaimer: This catalog is intended for authorized John Deere dealers only. All products offered are strictly aftermarket items, from a variety of manufacturers. No products have been tested by, approved by, or recommended by Deere & Company (John Deere) nor by Wiedmann Bros. Distributing Co.. Please review our terms and conditions or give us a call if you have any questions. This catalog, and the website WiedmannBros.com, is fully operated independently by Wiedmann Bros. Distributing Co., LLC. . The John Deere logo and images are registered trademarks of Deere & Co., Moline, IL. Wiedmann Bros. Distributing Co., LLC assumes no liability for errors in part numbers, pricing, listings, model applications or specifications. We reserve the right to change product quality, descriptions, specifications, prices and applications at any time without notice and with no further obligation. THE REPRODUCTION OF ANY MATERIAL FROM THIS CATALOG IS FORBIDDEN WITHOUT THE WRITTEN CONSENT OF WIEDMANN BROS. DISTRIBUTING CO., LLC 66 ORDER ONLINE Visit our website to explore all the ways you can customize a new John Deere Gator utility vehicle, tractor, or mower. » » » » » Access Dealer Pricing & Promotions Place Purchase Orders View Order Status & History Track Shipments Get Up-To-Date Product Information To Sign Up for Dealer Access Call 1-877-934-2444 Login Information: User Email: _________________________________ Password: _________________________________ 67 Toll-Free: Phone: Fax: 1 (877) 934-2444 1 (623) 934-8973 1 (818) 505-3519 Address: 7411 Laurel Canyon Blvd., Unit 3 North Hollywood, CA 91605 www.WBdealer.com