ONE-PIECE IMPLANTS 3.0 3.75 4.0 4.75

with
ONE-PIECE IMPLANTS
6mm
6mm
1.8mm
1.8mm
OP is a one-piece dental implant designed for single tooth
replacement or short-span fixed prostheses where parallelism can be readily achieved. As with all Intra-Lock® dental
implants, the OP features the bio-active surface; OSSEAN®
• Simplicity and efficiency of design.
• Ideal when minimum preparation of
abutments are required.
• OSSEAN® bio-active surface.
• Ideal for single units or short-span prostheses.
Length
Length
REFERENCE NO.
3.0
3.75
3.0
OP3010 .....................One Piece Implant Ø3.0 X 10mm
OP3011 .....................One Piece Implant Ø3.0 X 11.5mm
OP3013 .....................One Piece Implant Ø3.0 X 13mm
OP3015 .....................One Piece Implant Ø3.0 X 15mm
3.75
OP3710 .....................One Piece Implant Ø3.75 X 10mm
OP3711 .....................One Piece Implant Ø3.75 X 11.5mm
OP3713 .....................One Piece Implant Ø3.75 X 13mm
OP3715 .....................One Piece Implant Ø3.75 X 15mm
6mm
For the 3.0 & 3.75 OP Implants only, the actual thread
length is 2mm less than the catalog description.
(Example: OP3013: thread length = 11mm)
6mm
1.5mm
4.0
1.5mm
Length
Length
with
OP4011 .....................One Piece Implant Ø4.0 X 11.5mm
OP4013 .....................One Piece Implant Ø4.0 X 13mm
OP4015 .....................One Piece Implant Ø4.0 X 15mm
4.75
4.0
PRODUCT DESCRIPTION
with
OP4710 .....................One Piece Implant Ø4.75 X 10mm
OP4711 .....................One Piece Implant Ø4.75 X 11.5mm
OP4713 .....................One Piece Implant Ø4.75 X 13mm
4.75
www.intra-lock.com
INSTRUMENTATION
REFERENCE NO.
PRODUCT DESCRIPTION
OPCAD .....................One Piece Implant Contra Angle Driver
OPRDL......................One Piece Implant Ratchet Driver Long
OPRDS .....................One Piece Implant Ratchet Driver Short
OPRDL
OPCAD
OPRDS
HEALING ABUTMENTS
REFERENCE NO.
PRODUCT DESCRIPTION
OPHC2 ......................OP Healing Abutment
OPHC2
PROSTHETIC COMPONENTS
REFERENCE NO.
PRODUCT DESCRIPTION
OPA2 ...............One Piece Implant Analog
OPT2*..............One Piece Implant Transfer
OPA2
OPT2*
Groove
*OPT2: Make sure that groove in transfer is aligned
with groove on implant as well as implant analog.
(Left: Magnified top view of OP Transfers)
Top View of OPT2*
GLOBAL HEADQUARTERS
6560 West Rogers Circle, Bldg. 24 • Boca Raton, Florida 33487 USA • Tel: 877-330-0338 • www.intra-lock.com • [email protected]
Intra-Lock® is registered trademark of Intra-Lock International, Inc.
0499 • EC Rep: Intra-Lock System Europa, Spa., I-84100 Salerno
©Copyright 2012, Intra-Lock® System International • S4EN-12-6
www.intra-lock.com