Poster Session - ACCM-10

POSTER SESSION
POSTER SESSION 1
Date : Monday, October 17
Time : 17:05~18:25
Behaviors and Mechanics of CNT or Graphene Polymer Composites
PP 1-1
Investigation of Mechanical Properties and Fatigue Behavior of 4, 4’-Methylenediphenyl Diisocyanate
Grafted Carbon Nanotubes/Graphene NanoSheets/Co-polymer/Carbon Fiber Reinforced Laminated
Composite
Tsung-Yu Chou, Hao Chiang(National Tsing Hua University), Ming-Cheng Yip(National Tsing Hua University,
University of Macau)
Bio-Medical Composite Structures
PP 1-2
Effect of Ceria on Hydroxyapatite-alumina Binary Composites
Serdar Pazarlioglu, Serdar Salman(University of Marmara)
PP 1-3
Process Control for CFRP-aluminum Stack Drilling Using Material Interface Detection
Chan-Young Lee, Jae Hoon Ahn, Gyuho Kim, Tae In Ha, Byung-Kwon Min(Yonsei University), Tae-Gon Kim, SeokWoo Lee(Korea institute of Industrial Technolog)
PP 1-4
Drilling Simulation of UD/MD CFRP
Soo-Hyun Park(Yonsei University, Samsung Electronics Co. Ltd.), Gyuho Kim, Byung-Kwon Min(Yonsei University)
PP 1-5
Multifunctional Nanocarpets for Cancer Theranostics: Remotely Controlled Graphene Nanoheaters for
Thermo-chemosensitisation and Magnetic Resonance Imaging
Arathyram Ramachandra Kurup Sasikala, Afeesh Rajan Unnithan, Chan Hee Park, Cheol Sang Kim(Chonbuk
National University)
Carbon and Steel Hybrid Composites
pp 1-6
Comparison of the Collision Test in Center-pillar Reinforcement with TWB and CR420 /CFRP Hybrid
Composite Materials by Using Experimental and Theoretical Methods
Min-Sik Lee, C. G. Kang(Pusan National University)
Carbon Nanomaterial Based Multifunctional Nanocomposites
pp 1-7
Preparation of Surface Treated CF/CNTs Composites by Wet-laid and Film Lamination Process
Si-hoon Jang, Boram Lee, Ki-young Kim, Dae-young Lim, No-hyung Park(Korea Institute of Industrial
Technology)
Ceramic Matrix Composites
pp 1-8
Specimen Size Effects on Fracture Behavior of SiC/SiC Tubes During Circumferential Tensile Test
Ju-Hyeon Yu, Hirotatsu Kishimoto, Naofumi Nakazato, Joon-Soo Park, Akira Kohyama(Muroran Institute of
Technology)
pp 1-9
Effect of the Addition of TZP Having Different Crystal Structures on the Mechanical Properties of Al2O3
Hyungyu Lim, Bumrae Cho, Bolang Kim (Keimyung University), Jihun Chae(Gyeongbuk Hybrid Technology
Institute)
Composite Structures in Aerospace Applications
pp 1-10
Ho-Sung Lee, Kyung Ju Min(Korea Aerospace Research Institute, University of Science &Technology), Seung
Yun Rhee, Jong-Hoon Yoon, Joon-Tae Yoo(Korea Aerospace Research Institute), Kookil No(University of Science
&Technology)
Composites for Transportation Technology
pp 1-11
Structural Characteristics of Composite Automotive Seat Frame
Hyun Seok Oh, Chan Hee Jeong, Kwang Young Jeong, SeongSik Cheon(Kongju National University)
Electrically/Thermally Conductive Composites
pp 1-12
The Investigations of Preparing, Thermal, Electrical, and Mechanical Fatigue Properties of Silver
Nanowires/Graphene Nanocomposites
Tsung-Yu Chou, Chen-Hao Hsu(National Tsing Hua University), Ming-Cheng Yip(National Tsing Hua University, Lui
Che Woo College)
pp 1-13
Preparation and Investigation of CNT Wet-laid Buckypaper for Electrically Conductive Structural
Applications Jun Choi, Si-Hoon Jang, No Hyung Park, Dae Young Lim(Korea Institute of Industrial Technology
(KITECH))
Electrochromic Materials/ Windows
pp 1-14
Evaluation of Electrochromic Performance with Varying Ratio of Different Particle Sized WO3
Electrochromic Layer Deposited via Nano Particle Deposition System for the Application of Smart
Window
Kwangmin Kim, Hyungsub Kim, Dahyun Choi, Minji Lee, Caroline Sunyong Lee(Hanyang University), Wonshik
Chu(Seoul National University), Dooman Chun(University of Ulsan)
pp 1-15
Tungsten Oxide Electrochromic Film Using Patterned Graphene TCE
Dong Soo Choi(Sungkyunkwan University), Woo Seok Yang(Korea Electronics Technology Institute), Dae Ho
Yoon(Sungkyukwan University
pp 1-16
Evaluation of Slit Nozzle for Effective Deposition of WO3
particle Deposition System
Jun-Ho Choi, Hani Park, Doo-Man Chun(University of Ulsan), Caroline S. Lee(Hanyang University), Won-Shik
Chu(Seoul National University)
pp 1-17
Effect of Lithiation Methods on Electrochromic Performance of W-NiO Electrode
Seokwoo Kim, Taeyeong Han, Myung-Hyun Ryou, Yong Min Lee(Hanbat National University)
pp 1-18
Control of Lithium Ion Contents in WO3 Electrode and Its Effect on Electrochromic Performance
Taeyeong Han, Williams Agyei Appiah, Seokwoo Kim, Myung-Hyun Ryou, Yong Min Lee(Hanbat National
University)
pp 1-19
Stability Improvement of NiO-based Counter Electrode in Electrochromic Device
Sang Jin Lee(Korea Electronics Technology Institute, Korea University), Yekyung Kim, Jin Woo Seo, Hyeongkeun
Kim, Seung Ho Han, Se Hyun Rhyu(Korea Electronics Technology Institute), Sahn Nahm(Korea University)
Environments and Life Cycle Analysis
pp 1-20
Tin Oxide Growth on Tin Surface Exposed to Indoor Condition
Hiroyuki Saito, Masaaki Kumakura(Tokyo Denki University)
Graphene & Graphene-related Nano-composites
pp 1-21
A Study on Power Generation Performance of P(VDF-TrFE)/rGO Nanocomposites
Liangke Wu, Ning Hu(Chongqing University)
Graphene and Graphene Composites
pp 1-22
Flexible Graphene-coated Elastomer with High Sensitivity of Strain and Pressure
Hyokeun Lee, Gwan-Hyoung Lee(Yonsei University)
pp 1-23
3D-printable Graphene-polymer Composites with High Conductivity and Mechanical Stability
Mirae Kim, Jae-Hwan Jeong, Jong-Young Lee, Seok-Hyeon Kang, Young-Kook Lee, Gwan-Hyoung Lee(Yonsei
University), Sanghyuk Kwon(Sungkyunkwan University), Changgu Lee(Sungkyunkwan University)
pp 1-24
Study on the Multifunctional Films Based on Graphene Composites
Yong Liu, Dong Zhang, Yu Shang, Miaomiao Li(Tongji University)
Graphene Composites 2
pp 1-25
Side Wall 3D Structure Printing Using Graphene Incorporated Thixotropic Composites
Hanna Sun, Youngjun Kim, Minju Hwang, Inkyung Park, Jonghwan Suhr, Doyoung Byun, Jae-Do Nam
(Sungkyunkwan University), Hyoung Jin Choi(Inha University), Kwang Jin Kim(University of Nevada)
pp 1-26
Multi-step Microwave Irradiation for a Fast Exfoliation of Graphene Oxide (GO) and Reduced GO (rGO)
Jiwang Yoo, Myung-gi Kim, Woojin Jang, Sanghoon Kim, Heewon Seo, Jungwoo Park, Kisuk Choi, Jae-Do
Nam(Sungkyunkwan University)
Green Composites
pp 1-27
Effects of Alkali Treatment on Properties of Henequen/Polyamide 6 Green Composites Produced by
Different Fiber Feeding Methods upon Extrusion Process
Jeonghoon Kim, Donghwan Cho(Kumoh National Institute of Technology)
pp 1-28
Effect of Twist on Multiple Breakages for Single Yarn Green Composites
Takahiro Shimizu, Takashi Yoshimura, Junji Noda, Koichi Goda(Yamaguchi University)
pp 1-29
Composites
Yuto Sato, Koichi Goda(Yamaguchi University)
Joints
pp 1-30
Fracture Behavior of Composite Materials with Aluminum and CFRP Having Center Crack
Jae Woung Park, Jae Ung Cho, Seong Sik Cheon(Kongju National University)
Metal Matrix Composites
pp 1-31
High Temperature Structural Properties of TiC/SUS431 Composite Fabricated by Isothermal Melt
Hyuk-Tae Kwon, Ilguk Jo, Seungchan Cho, Sang-Bok Lee, Sang-Kwan Lee(Korea Institute of Materials Science)
pp 1-32
Effect of Heat Treatment on the Mechanical Properties of SiC/Al7075 Metal Matrix Composites
Sangmin Shin(Korea Institute of Materials Science, Pusan National University), Seungchan Cho, Heebong Kim,
Ilguk Jo, Sang-Kwan Lee, Sang-Bok Lee(Korea Institute of Materials Science), Yangdo Kim(Pusan National
University)
Multi-functional Composites
pp 1-33
Lignin-based Carbon/Sepiolite Hybrid Materials as a Reinforcement Filler of Poly(Lactic Acid)
Composites
Hyun-gyoo Roh, Jongshin Park, Jungmin Lee, Soohee Park, Hyeonjeong Kang, Myeong-uk Kim, Dahyun Kim,
Juhee Byeon(Seoul National University)
pp 1-34
Hyeonjeong Kang, Jongshin Park, Soohee Park, Jungmin Lee, Hyungyoo Roh, Myoung-Uk Kim, Dahyun Kim,
Juhee Byeon(Seoul National University), Jongsu Lee, Sejun Oh(Kopla Co., Ltd.)
pp 1-35
MyoungUk Kim, JongShin Park, JungMin Lee, HyunGyoo Roh, HyeonJeong Kang(Seoul National University),
SeJun Oh, JongSu Lee(Kopla Co., LTD.)
Nanocellulose and Its Applications
pp 1-36
Electrospinning of Silk Fibroin Based Antibacterial Wound Dressing
R. Erdem(Akdeniz University), M. Yuksek, Erkan Isgoren, E. Sancak, O. Atak, M. Erginer(Marmara University)
pp 1-37
Hetero-nanonet Mediated Paper Batteries, Toward High Energy Density and Origami Foldability
JongTae Yoo, Sung-Ju Cho, Sang-Young Lee(Ulsan National Institute of Science and Technology)
Nanocomposites for Energy Conversion/Storage
pp 1-38
Ionic Conductivity and Young’s Modulus of Epoxy-based Solid Electrolytes Containing Ionic Liquid and
Inorganic Filler
Sook Jin Kwon, U Hyeok Choi, Byung Mun Jung, Sang Bok Lee(Korea Institute of Materials Science)
pp 1-39
Core–shell Structured Au@CdS/TiO2
2
Production
Soonhyun Kim, Young Kwang Kim, Sang Kyoo Lim(Daegu Gyeongbuk Institute of Science and Technology)
pp 1-40
from Water Under Sunlight
Suman Thakur, Bibekananda De, Tolendra Kshetri, Nam Hoon Kim, Joong Hee Lee(Chonbuk National University)
pp 1-41
Electrochemical and Photochemical Performances of Hexagonal and Rod Shaped CuS@Carbon Dot
Bibekananda De, Suman Thakur, Suhas Mutalik Desai, Nam Hoon Kim, Joong Hee Lee(Chonbuk National University)
pp 1-42
Thin Films and Its Electrochemical Properties
In Chul Kim, Danyun Lei, Jiyoung Park, Hak-Yong Kim, Byoung-Suhk Kim(Chonbuk National University), MinKang Seo(Korea Institute of Carbon Convergence Technology)
pp 1-43
Fabrication of Flexible Solid-state High Performance Supercapacitors Based on Nanostructured
NiCo2O4/PPy-decorated Carbon Fiber Papers
Tae Hoon Ko, Wan-Jin Kim, Danyun Lei, Yong-Sik Chung, Hak-Yong Kim, Byoung-Suhk Kim(Chonbuk National
University)
Processing and Manufacturing-Thermoplastic Composites
pp 1-44
Effect of Carbon Fiber Length on the Mechanical Properties of Carbon/ABS Composites Processed by
LFT Technology
Daekyun Hwang, Donghwan Cho(Kumoh National Institute of Technology)
Polymer Based Nanohybrid Materials
pp 1-45
Synthesis and Characterization of PLA-PEG Grafted Magnetic Hollow Silica Microspheres as the Carrier
of Iodinated Contrast Media
Min Zhao, Zhongli Lei, Hong Yang (Shaanxi Normal University), Jiangtao Lui(Shaanxi Normal University, Shaanxi
University of Chinese Medicine)
Smart Structures/NDE/SHM or Processing and Manufacturing
pp 1-46
Measurement of Internal Strain Distribution of NCF Composites by Rayleigh Scattering-type Strain
Distribution Sensors
Yuki Handa, Tatsuro Kosaka, Kazuhiro Kusukawa(Kochi University of Technology)
pp 1-47
Integral Manufacturing of a Drone Wing with Stiffener by VaRTM
Tomokazu Sagimori, Tatsuro Kosaka, Kazushige Kusukawa(Kochi University of Technology)
pp 1-48
Impact Monitoring of Composite Wing Using Error Outlier Assessment Based Impact Localization
Algorithm and FBG Sensors
Pratik Shrestha, Yurim Park, Chun-Gon Kim(Korea Advanced Institute of Science and Technology)
Soft Actuators and Sensors Based on Nanocomposites
pp 1-49
Displacement Control of Antagonistic-type Nylon Fiber Actuator
Motoya Suzuki, Norihiro Kamamichi(Tokyo Denki University)
pp 1-50
Force Control of Integrated Ionic Polymer-metal Composite Actuators with Stochastic ON/OFF
Controller
Keishiro Kimura, Norihiro Kamamichi(Tokyo Denki University)
Soft Morphing/Actuators
pp 1-51
Direct Printing of Strain Gauge Sensor Using Nanoparticles onto Carbon Fiber Reinforced Plastic(CFRP)
Hae-Sung Yoon, Ho-Jin Kim, Min-Soo Kim, Hyung-Soo Kim, Sung-Hoon Ahn(Seoul National University), Gil-Yong
Lee(Seoul National University, University of Washington)
pp 1-52
Design of Biomimetic Flapping Actuator Using Smart Soft Composite
Sung-Hyuk Song, Min-Sik Kim, Jang-Yeob Lee, Sung-Hoon Ahn(Seoul National University)
Soft Nano-Composite Actuators and Devices
pp 1-53
An Experimental Study on Piezoresistive Characteristics of Carbon Nanotube Composite Flexible Strain
Sensors
Sung Yong Kim, Baek Gyu Choi, In Hyuk Kang, Inpil Kang(Pukyong National University), Gyong Rak Choi(Korea
Institute of Industrial Technology)
pp 1-54
Piezoresistive Behavior of a Carbon Nanotube/Synthetic Rubber-based Nanocomposite
Sang-Eun Shim, Gi-Woo Kim(Inha University)
pp 1-55
Wettability Control Using by Wrinkled Dielectric Elastomer Actuator
Ki-Woo Jun, Il-Kwon Oh(Korea Advanced Institute of Science and Technology)
Yiu-Wing Mai 70th Birthday Celebration
pp 1-56
The Effect of Nitrile-functionalized Nano-aluminum Oxide on the Thermomechanical Properties and
Toughness of Phthalonitrile Resin
Huyan Shan, Xiaoyan Yu, Qingxin Zhang(Hebei University of Technology)
Structural Design
pp 1-57
Evaluation of the Structural Integrity of Lightweight Welding Robot Arm Including Composite Materials
Jaeyoul Lee, Kwangwoo Jeon, Hyunjoon Chung, Sungho Hong, Goobong Chung(Korea Institute of Robot and
Convergence), Kwangbok Shin(Hanbat National University)
Structural Response and Design
pp 1-58
Fracture Mechanism of Cruciform CFRP Cross-ply Laminates Under Biaxial Loading Based on
Experiments and FE Analyses
J.Gondoh, J.Noda, K.Goda(Yamaguchi University), T.Suzuki, T.Kobayashi(Mitsubishi Rayon Co.,Ltd.)
Thermoplastic Composites
pp 1-59
DSC Investigation and Modeling of the Polymerization for ε -caprolactam
Mei-Xian Li, Gyu-Hee Lee, Dasom Lee, Jaemin Jung, and Woo-Il Lee(Seoul National University)
pp 1-60
Hye-In Kwon, Sang-Jin Lee, Seong-Hwa Hong, Hwan-Kuk Kim(Korea Textile Machinery Institute)
pp 1-61
Manufacture and Characterization of Woven Carbon Fiber Fabric Reinforced TPU Composites (CF/TPU)
by Film Stacking Processes
Da Hee Choi(Hanyang University, Korea Institute of Industrial Technology), Tae Hee Han(Hanyang University),
Ki-Young Kim(Korea Institute of Industrial Technology)
Carbon, Ceramic Matrix Composites
pp 1-62
Study on Hybrid Type Fiber Composite Material Applied with EVA Film
Min Sang Lee, Tugirumubano Alexandre, Jeong Jin Lee, Sol Ah Jeon, Hyo Nam Jeong, Lee Ku Kwac(Jeonju
University)
POSTER SESSION 2
Date : Tuesday, October 18
Time : 17:00~18:00
Composites for Energy Storage/Harvesting
PP 2-1
Hyun-Jun Kim, Jae-Hwan Kim, Ki-Woo Jun, Il-Kwon Oh(Korea Advanced Institute of Science and Technology)
pp 2-2
Wet-spinning Assembly of Hybridized GO-CNT Fibers for Fiber-typed Supercapacitor Electrodes
Hwajin Cha, Nari Kim, Joon Hyung Byun, Youngseok Oh(Korea Institute of Materials Science)
pp 2-3
Three-Dimensional Porous Polydopamine/CNT Networks Decorated Carbon Fiber Electrodes for the
Wire-typed Supercapacitors
Nari Kim, Hwajin Cha, Wonoh Lee, Joon Hyung Byun, Youngseok Oh(Korea Institute of Materials Science)
Damage and Fracture
pp 2-4
Evaluation of Material Properties and Internal Damage within CFRP and CFRP/Al Sandwich Panels due
to Impact Loading
Masahiro Hosoi, Mamoru Mizuno, Jian Shi(Akita Prefectural University)
Experimental Techniques
pp 2-5
Continuous Measurement of Three Dimensional Permeability of Fiber Mat with Various Volume
Fractions in Liquid Composite Molding
Jung Soo Kim, Moon Kwang Um, Dong Gi Seong(Korea Institute of Materials Science), Shino Kim(Korea
Aerospace Industries. Ltd)
Fibers, Matrices and Interfaces
pp 2-6
Study on Cutting Behaviors of Tow Prepreg Made of Carbon Fiber and Epoxy Resin
Hye-In Kwon, Sang-Jin Lee, Hyeong-Chan Cho, Hwan-Kuk Kim(Korea Textile Machinery Institute)
pp 2-7
Interfacial Treatment Effects by a Micro Mist Method on Mechanical Behaviors of GFRP
Yuhei Nozaki, Tatsuro Kosaka, Kazuhiro Kusukawa, Toshiyuki Kawaharamura(Kochi University of Technology)
General
pp 2-8
Biodegradable Wheat Gluten/Thermoplastic Wheat Starch Foams
Sudsiri Hemsri, Punnakrit Nakkharat(Silpakorn University)
pp 2-9
Mechanical, Thermal Properties and Tension Set of NR/LDPE Thermoplastic Vulcanizates Prepared
with DCP Dynamic Cure
Chanchai Thongpin, Sariya Kruathong(Silpakorn University)
pp 2-10
The Effect of Solution Grafted GMA-NR on the Compatibility of PLA/NR Blend
Chanchai Thongpin, Sirinapha Chalom(Silpakorn University)
pp 2-11
Synthesis of Calcium Carbonate from Fish Scales
Chaliga Chiachun, Sirinya Chantarak, Kaewta Kaewtatip(Prince of Songkla University)
Green Composites
pp 2-12
Self-reinforced Composites from Pineapple Leaf Fibers
Supachok Tanpichai(King Mongkut’s University of Technology Thonburi)
pp 2-13
Starch Based Biocomposites Reinforced with Cellulose Nanocrystals from Cladophora Rupestris
Melvir R. Sucaldito, Drexel H. Camacho(De La Salle University)
pp 2-14
Preparation and Characterization of Green Composites from Wheat Gluten and Shrimp Shell
Supakorn Thammahiwes, Sirinya Chantarak, Kaewta Kaewtatip(Prince of Songkla University)
Industrial Applications
pp 2-15
CFRP/CFRTP and Preparation of PET Reinforced Epoxy Resin
Hitoshi Kanazawa, Aya Inada(Fukushima University)
Interfaces and Interphases
pp 2-16
Interaction of Metal Fuel with Ceramic Plasma-spray Coated Graphite Crucible
Ki-Hwan Kim, Ki-Won Hong, Jong-Hwan Kim, Jeong-Yong Park, Chan-Bock Lee(Korea Atomic Energy Research
Institute)
Joints
pp 2-17
Pull-out Characteristics of Grooved Carbon Fiber Z-pins
pp 2-18
Lap Shear Strength of Similar and Dissimilar Adherends Boned with Two-part Epoxy Adhesive
Chung-Ki Sim, Seong-Kyun Cheong(Seoul National University)
Kimiyoshi Naito, Hiroyuki Oguma, Hyun-Bum Kim(National Institute for Materials Science)
pp 2-19
An Accelerated Characterization of Viscoelastic Relaxation in Bolted Composite Joints
Jiaxin Lv, Yi Xiao, Xu Jiang(Tongji University), Ruiguang Pei(AVIC Commercial Aircraft Engine Co.,Ltd)
pp 2-20
Fatigue Damage Modeling for Preload Relaxation in Bolted Composite Joints
Yuanzhen Shen, Yi Xiao, Jie Wang(Tongji University)
Mechanical and Physical Properties
pp 2-21
Research on the Drilling Temperature of the Carbon Fiber Epoxy Composites
Yongjie Bao, Yini Zhang, Yiqi Wang, Xueshu Liu(Dalian University of Technology)
pp 2-22
Effect of Electroless Nickel-plating on Fracture Toughness of Carbon Fiber Reinforced Composites
Ye-Ji Han, Soo-Jin Park(Inha University)
pp 2-23
Min-Joo Kang, Soo-Jin Park(Inha University)
Metal Matrix Composites
pp 2-24
2
particles
Nano-
Xinyi Luo, Jie Tao, Dunwen Zuo(Nanjing University of Aeronautics and Astronautics)
pp 2-25
Electrical Conductivity Measurement of Al-Mg2Si Alloy for Composite Matrix
Takashi Nishigawa, Kenjiro Sugio, Gen Sasaki(Hiroshima University), Junji Tabata(Hiroshima Aluminum Industry
Co., Ltd.), Nobuyuki Fuyama(Western Hiroshima Prefecture Industrial Research Institute)
pp 2-26
Development of Manufacturing Process of Porous VGCF and Their Mechanical Property
Fei Gao, Youqiang Yao, Yongbum Choi, Zhefeng Xu, Kazuhiro Matsugi, Kenjiro Sugio, Gen Sasaki(Hiroshima
University)
pp 2-27
Fabrication of Lotus Type SiO2+VGCF Reinforced Al Composites and Their Thermal Property
Yongbum Choi, Z. F. Zu, K. Matsugi, K. Sugio, G. Sasaki(Hiroshima Uinversity), M.H. Lee(Dong-Eui Institute of
Technology)
pp 2-28
Thermal Simulation of Manufacturing Metallic Material by Utilizing Pulsed Current Activity Sintering Method
Hyo-Eun Nam, Hyun-Kuk Park, Jun-Ho Jang(Chonnam National University), Ik-Hyun Oh(Korea Institute of
Industrial Technology)
Multi-functional Composites
pp 2-29
Effect of Fiber Aspect Ratio on the EMI Shielding Effectiveness of Magnetic Hollow Fiber/EPDM
Composites
Jae Ryung Choi, Ka Hyun Park, Byung Mun Jung, Sang-Kwan Lee, Sang Bok Lee(Korea Institute of Materials
Science
pp 2-30
Injection Molding of Mechanoluminescent Composite Wheels
Hyeon Kyeong Kim, Young Seok Song(Dankook Univesity)
pp 2-31
Analysis of Sepiolite Embedded PVA Film
So Yeon Ahn, Young Seok Song(Dankook University)
pp 2-32
Jehong Park, Seokgyu Lim(Next Generation Materials Co.,Ltd), Akira Kawasaki(Tohoku University), Marc
Leparoux(Empa), Kwangjae Park(Pukyong National University), Hansang Kwon(Next Generation Materials
Co.,Ltd, Pukyong National University)
Nano-Composites and Nanotechnology
pp 2-33
Seok-Hu Bae, Ji-Eun Kim, Il-Kwon Oh(Korea Advanced Institute of Science and Technology)
pp 2-34
DTA for Amount of ZrO2-SiO2 in CMS Glass Ceramics
Dayoung Lee, Seunggu Kang(Kyonggi University)
pp 2-35
Photoluminescence (PL) of WSe2/Cy3-dye Hybrid
Han Kyu-Hyun, S. G. Jo, J. Joo(Korea University), J. Kim(Sungkyunkwan University)
pp 2-36
Morphological Evolution in Natural Rubber Network in Clay Compatibilized Natural Rubber/
Polypropylene Blends Crosslinked with Phenolic Resin
Natinee Lopattananon, Abdulhakim Masa, Azizon Kaesaman(Prince of Songkla University), Hiromu Saito(Tokyo
University of Agriculture and Technology), Tadamoto Sakai(Shizuoka University)
pp 2-37
Carrageenan/Silver Nanocomposite: Synthesis, Characterization and Antimicrobial
Properties Jose Paolo O. Bantang, Drexel H. Camacho(De La Salle University)
pp 2-38
Internal Structure Analysis Using Non-destructive Analysis for Dispersion of the Filler in the Polymer
Nanocomposites
Hyun Su Kim, Seong Yun Kim(Korea Institute of Science and Technology
pp 2-39
Volume Change of Expanded Graphite Via Inductively Coupled Plasma Treatment and Mutual Relation
Between Expansion Volume and Thermal Conductivity of Polymer Composites
Jong Hyeok Kim, Hyun Su Kim, Wu Young Kim, Hun Su Lee, Seong Yun Kim(Korea Institute of Science and
Technology)
pp 2-40
Electrical Conductivity of Nano-compounds Filled with Highly Dispersed Multi-walled Carbon Nanotube
via in situ Polymerization
Ji-Un Jang, Seong Yun Kim(Korea Institute of Science and Technology)
pp 2-41
Electrical and Mechanical Properties of Flexible Multi-walled Carbon Nanotube/Cyclic Butylene
Terephthalate Composite Film
Ji Eun Cha, Seong Yun Kim(Korea Institute of Science and Technology)
NDE Technology
pp 2-42
Characterization of Terahertz Penetration on Conducting and Non-conducting FRP Composite Materials
Kwang-Hee Im(Woosuk University), In-Young Yang(Chosun University), Sun-Kyu Kim(Chonbuk Natl. University),
Seung Woo Ra(Seoul Metal Co. Ltd.), Jong-An Jung(Songwon University), Young-Tae Cho(Jeonju University), David
Hsu(Iowa State University)
pp 2-43
X-ray Residual Stress Measurement of Polyamide Matrix in CFRP Under Cryogenic Temperature
Dai Hashimoto, Yuya Uesaki, Masayuki Nishida(Kobe City College of Technology)
Processing and Manufacturing
pp 2-44
Study on Optimization of High-thermal Resistant Epoxy Resin Compounding for Automobile Using
Design of Experiments
Eunsong Lee(Korea Institute of Materials Science , Pusan National University), Dong Gi Seong, Moon-Kwang Um,
Jin-Woo Yi(Korea Institute of Materials Science ), Wonho Kim(Pusan National University)
pp 2-45
Manufacturing and Characterization of Poly(Lactic Acid)/Halloysite Composite Materials
Bo Ram Lee(Korea Institute of Industrial Technology, Hanyang University), Si-Hoon Jang, No-Hyung Park(Korea
Institute of Industrial Technology )
pp 2-46
Assessment of Particle Distribution in Particle-containing Composite Materials
Ji Hoon Lee, Seung Mo Kim(Korea University of Technology and Education)
Recycling
pp 2-47
Effects of Pre-curing of IGCC Slag Based Geopolymer Crystal Growth
Soobin Park, Seunggu Kang(Kyonggi University)
pp 2-48
A Kinetic Study on the Supercritical Decrosslinking Reaction of Silane-crosslinked Polyethylene Using a
Continuous Reactor
Bum Ki Baek(Korea Institute of Science and Technology, Yonsei University), Yun Ho La(Korea Institute of Science
and Technology, Hanyang University), Jun Pyo Hong, Seok Jin Noh, Chong Min Koo, Soon Man Hong(Korea
Institute of Science and Technology), Haksoo Han(Yonsei University)
pp 2-49
Mechanical Properties of Recycling Materials Based-geopolymer
Yuna Lee, Seunggu Kang(Kyonggi University)
Sandwich Technologies
pp 2-50
Effect of Adhesive Quantity on Failure Behavior and Mechanical Properties of Fiber Metal Laminates
Based on the Aluminum-lithium Alloy
Huaguan Li, Jie Tao, Xuelong Fu(Nanjing University of Aeronautics and Astronautics)
Structural Power Materials
pp 2-51
Preparation and Properties of Solid Polymer Electrolyte Based on Imidazolium-based Ionic Liquids for
Structural Supercapacitor
Bong-Sang Cho, Jun Choi, Ki-Young Kim(Korea Institute of Industrial Technology)
Testing and Characterization
pp 2-52
An Experimental Evaluation of Thermal Insulation Performance for the Composite Material Frame of
Welding Robot Arm
Kwangwoo. Jeon, Jaeyoul Lee, Sungho Hong, Hyunjoon Chung, Goobong Chung(Korea Institute of Robot and
Convergence)
pp 2-53
Analysis for Open Hole Tensile Behaviors of Vacuum-infused Composite According to the Toe Width of
Carbon Fiber Plain Weave
Lee, Sang-Jin, Kwon, Hye-In, Lee, Ji-Hun(Korea Textile Machinery Research Institute), Chung, Il-Seop(Yeungnam
University)
pp 2-54
Evaluation of Mechanical Properties of Composite Material Under Space Thermal Environments
Jae-Moon Im, Kwang-Bok Shin(Hanbat National University), Ik-Hyeon Choi(Korea Aerospace Research Institute)
pp 2-55
In-situ Computed Tomography of the Compaction Behaviour of Single-ply and Multi-ply Carbon Fibre
Woven Fabrics
Robert Schirner, Martin Süß, Maik Gude(Technische Universitaet Dresden)
Textile Composites
pp 2-56
Development of the Mechanical Properties of the Composite Structures with Reinforced Carbon Fiber
Oguz Eryilmaz, M. Akalin, M. Yuksek, E. Sancak(Marmara University)
pp 2-57
Investigation of Electromagnetic Shielding Effectiveness of The Woven Fabric Produced From PE/CB
Composite Fibres Reinforced With/Without Silver Nano Powder Extruded by Melt-spinning Method
M.S. Ozen, E. Sancak, Metin Yuksek, O. Atak(Marmara University), N. Soin, T. Shah, E. Siores(University of Bolton)
pp 2-58
Development of Conductive Fiber Composite Structures for Shielding of Electromagnetic Waves
E. Sancak, Ismail Usta, M. Yuksek, M. Uzun, M. Akalin, E. Isgoren, A. Beyit(Marmara University)
pp 2-59
Investigation and Comparison of Electromagnetic Shielding Properties of Carbon and Copper&Nickel
Coated Carbon Nonwoven Fabrics Produced by Wet-Laid Technology
Mustafa Sabri Ozen, E. Sancak, A. Beyit, I. Usta, M. Akalin, M. Yuksek, O. Atak(Marmara University)
pp 2-60
The Heating and Cooling Behaviours of Needle-punched and Calendering Nonwoven Fabrics with PET
and Silver-coated Polyamide Fibres
E. Sancak, M. Akalin(Marmara University), M.S. Ozen, N. Soin, T. Shah(University of Bolton)
pp 2-61
Electromagnetic Interference Shielding Effectiveness of Woven Fabric Produced from Carbon
Erhan Sancak, M. Akalin, M. Yuksek(Marmara University), M.S. Ozen, N. Soin, T. Shah, E. Siores(University of
Bolton)
Wood and Paper
pp 2-62
Characterization of Carbonized Woody Biomass Pellets
Hitoo Tokunaga(National Institute of Technology Kagoshima College), Yuta Nakamura, Tomoya Kanemoro(Ube
College)
pp 2-63
Sunghoon Kim, Minhyuk Rim(Ore. co. Ltd.), Myounguk Kim, Jungmin Lee, Hyun-gyoo Roh, Jongshin Park(Seoul
National University)