EPSON Printer Driver Specification
Transcription
EPSON Printer Driver Specification
EPSON Advanced Printer Driver for TM Series Ver.3.04 Printer Driver Specification EPSON Rev.D 410734403 Revision Information Revision APD Version Page Altered Items and Contents Rev. A 3.02 All pages Newly authorized Rev. B 3.02a A-130,131 Change the TM-T88IV Receipt3 (Add the NV bit images) Rev. C 3.03 A-82 Delete the TM-J9000 Drivers Rev. D 3.04 A-82,116,129 Add the TM-T86 Drivers, Change the TM-T88IIII Receipt3 (Change the User Defined Paper Size), Change the TM-T88IV Receipt3 (Change the User Defined Paper Size) Advanced Printer Driver Printer Driver Specification Appendix-A Printer Driver Specification This book explains the setting items of Printer Font, Control Font, Control A Font, Resolution, Paper Size, Rotate, Reduce、and Water Mark. The page for each printer is as follows. Printer TM-H3000(R) TM-H5000II TM-H5200 TM-H6000II Printabl e number of colors Single color Single color Single color Twocolor Single color Driver type Type of paper to print Driver name Reference Page Compatible Receipt EPSON TM-H3000(R) Receipt A-4 Page EPSON TM-H3000(R) Reduce35 A-6 Page Slip EPSON TM-H3000(R) Slip A-7 Page Receipt EPSON TM-H5000II Receipt A-9 Page EPSON TM-H5000II Reduce35 A-11 Page Slip EPSON TM-H5000II Slip A-12 Page Receipt EPSON TM-H5200 Receipt A-14 Page EPSON TM-H5200 Reduce35 A-16 Page Slip EPSON TM-H5200 Slip A-17 Page Ver.3.XX Receipt EPSON TM-H6000II Receipt A-19 Page Compatible Receipt EPSON TM-H6000II Receipt A-27 Page EPSON TM-H6000II Reduce35 A-29 Page Slip EPSON TM-H6000II Slip A-21 Page Validation EPSON TM-H6000II Validation A-25 Page Endorsement EPSON TM-H6000II Endorse A-23 Page Slip EPSON TM-H6000II Slip A-30 Page Endorsement EPSON TM-H6000II Endorse A-32 Page Ver.3.XX Receipt EPSON TM-H6000III Receipt A-34 Page Compatible Receipt EPSON TM-H6000III Receipt A-42 Page EPSON TM-H6000III Reduce35 A-44 Page Slip EPSON TM-H6000III Slip A-36 Page Validation EPSON TM-H6000III Validation A-40 Page Endorsement EPSON TM-H6000III Endorse A-38 Page Slip EPSON TM-H6000III Slip A-45 Page Endorsement EPSON TM-H6000III Endorse A-47 Page Receipt EPSON TM-J2000/2100 Receipt A-49 Page EPSON TM-J2000/2100 Reverse A-52 Page EPSON TM-J2000/2100 Reduce35 A-51 Page Compatible Compatible Ver.3.XX Compatible TM-H6000III Twocolor Single color Ver.3.XX Compatible TM-J2000/ 2100 Rev.D Twocolor Compatible Printer Driver Specification A-1 Advanced Printer Driver Printer Driver Specification TM-J7000/ 7100 Twocolor Ver.3.XX Compatible TM-J7500/ 7600 Twocolor Ver.3.XX Compatible TM-L60II TM-L90 Single color Compatible Twocolor Ver.3.XX Receipt EPSON TM-J7000/7100 Receipt A-53 Page Slip EPSON TM-J7000/7100 Slip A-56 Page Endorsement EPSON TM-J7000/7100 Endorse A-58 Page Receipt EPSON TM-J7000/7100 Receipt A-60 Page EPSON TM-J7000/7100 Reduce35 A-63 Page Slip EPSON TM-J7000/7100 Slip A-64 Page Endorsement EPSON TM-J7000/7100 Endorse A-67 Page Receipt EPSON TM-J7500/7600 Receipt A-70 Page Slip EPSON TM-J7500/7600 Slip A-73 Page Receipt EPSON TM-J7500/7600 Receipt A-75 Page EPSON TM-J7500/7600 Reduce35 A-78 Page Slip EPSON TM-J7500/7600 Slip A-79 Page Receipt EPSON TM-L60II Receipt A-82 Page Label EPSON TM-L60II Label A-84 Page Receipt EPSON TM-L90 Receipt A-86 Page EPSON TM-L90 Peeler Receipt A-88 Page EPSON TM-L90 Label A-91 Page EPSON TM-L90 Peeler Label A-94 Page EPSON TM-L90 Receipt A-97 Page EPSON TM-L90 Receipt Reverse A-99 Page EPSON TM-L90 Reduce35 A-100 Page EPSON TM-L90 Label A-101 Page EPSON TM-L90 Label Reverse A-104 Page Label Compatible Receipt Label TM-P60 Single color Ver.3.XX Receipt EPSON TM-P60 Receipt A-105 Page TMP60Peeler Single color Ver.3.XX Receipt EPSON TM-P60Peeler Receipt A-107 Page Label EPSON TM-P60Peeler Label A-109 Page TM-T70 Single color Ver.3.XX Receipt EPSON TM-T70 Receipt A-112 Page TM-T86F Single color Ver.3.XX Receipt EPSON TM-T86F Receipt A-114 Page TM-T88II/IIR/ T88III Single color Ver.3.XX Receipt EPSON TM-T88III Receipt A-116 Page Compatible Receipt EPSON TM-T88III Receipt A-121 Page EPSON TM-T88III Reduce35 A-123 Page EPSON TM-T88II(R) Receipt A-118 Page EPSON TM-T88II(R) Reduce35 A-120 Page TM-T88IIIX TM-T88IV Single color Twocolor Ver.3.XX Receipt EPSON TM-T88IIIX Receipt A-124 Page Compatible Receipt EPSON TM-T88IIIX Receipt A-126 Page EPSON TM-T88IIIX Reduce35 A-128 Page EPSON TM-T88IV Receipt A-129 Page Ver.3.XX A-2 Printer Driver Specification Receipt Rev.D Advanced Printer Driver Printer Driver Specification TM-T90 Ver.3.XX Receipt EPSON TM-T90 Receipt A-132 Page Compatible Receipt EPSON TM-T90 Receipt A-134 Page EPSON TM-T90 Reverse A-138 Page EPSON TM-T90 Reduce35 A-137 Page TM-U210A/ B/D Twocolor Ver.3.XX Receipt EPSON TM-U210 Receipt A-139 Page Compatible Receipt EPSON TM-U210A(R) Receipt A-140 Page TM-U220A/ B/D Twocolor Ver.3.XX Receipt EPSON TM-U220 Receipt A-142 Page Compatible Receipt EPSON TM-U220A(R) Receipt A-144 Page TM-U230 Twocolor Compatible Receipt EPSON TM-U230 Receipt A-146 Page TM-U295 Single color Compatible Slip EPSON TM-U295 Slip A-148 Page TM-U375 Single color Ver.3.XX Receipt EPSON TM-U375 Receipt A-149 Page Slip EPSON TM-U375 Slip A-150 Page Validation EPSON TM-U375 Validation A-152 Page TM-U590 Single color Compatible Slip EPSON TM-U590 Slip A-154 Page TM-U675 Single color Compatible Receipt EPSON TM-U675 Receipt A-156 Page Slip EPSON TM-U675 Slip A-159 Page Validation EPSON TM-U375 Validation A-161 Page Receipt/ Journal EPSON TM-U950 Receipt A-163 Page Slip EPSON TM-U950 Slip A-165 Page TM-U950 Rev.D Twocolor Single color Compatible Printer Driver Specification A-3 Advanced Printer Driver Printer Driver Specification TM-H3000R Specification Remarks Driver name EPSON TM-H3000(R) Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] A-4 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Supported printer font name for Extended special function Rev.D Font name: control e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). Font name: controlA Printer Driver Specification A-5 Advanced Printer Driver Printer Driver Specification Supported resolution 180 x 180DPI 90 x 90DPI Supported paper size 80 x 297mm 80 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Smoothing mode on Smoothing mode off [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Specification Remarks Driver name EPSON TM- H3000(R) Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar Code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 80mm 210 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] A-6 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-H3000(R) Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(7x7) FontA(7x14) FontA(14x7) FontA(14x14) FontB(5x7) FontB(5x14) FontB(10x7) FontB(10x14) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(7x7) FontA(7x14) FontA(14x7) FontA(14x14) FontB(5x7) FontB(5x14) FontB(10x7) FontB(10x14) Supported printer font name for bar Code None Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 160 x 60DPI Rev.D TM Page:16(WPC1252) TM font name, Character size(dot) FontA(7x7) FontA(7x14) FontA(14x7 FontA(14x14) FontB(5x7) FontB(5x14) FontB(10x7) FontB(10x14) Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) P Cut Receipt (partial cut) Printer Driver Specification A-7 Advanced Printer Driver Printer Driver Specification Supported paper size 66.8 x 243mm Supported paper source Slip Slip (BOF) Supported print Quality None A-8 Printer Driver Specification BOF sensor disabled BOF sensor enabled Rev.D Advanced Printer Driver Printer Driver Specification TM-H5000II Specification Remarks Driver name EPSON TM-H5000II Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Rev.D Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) Printer Driver Specification A-9 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control A-10 Printer Driver Specification d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI 90 x 90DPI Supported paper size 80 x 297mm 80 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Smoothing mode on Smoothing mode off _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Specification Remarks Driver name EPSON TM-H5000II Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 80mm 210 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None Rev.D [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Printer Driver Specification A-11 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-H5000II Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code None Supported printer font name for Special function Font name: control A-12 Printer Driver Specification TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Extended special function Font name: controlA Supported resolution 150 × 72DPI Supported paper size 135.6 x 257mm Supported paper source Slip Supported print Quality None Rev.D Printer Driver Specification A-13 Advanced Printer Driver Printer Driver Specification TM-H5200 Specification Remarks Driver name EPSON TM-H5200 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] A-14 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Rev.D Font name: control b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). Printer Driver Specification A-15 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI 90 x 90DPI Supported paper size 80 x 297mm 80 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Smoothing mode on Smoothing mode off ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Specification Remarks Driver name EPSON TM-H5200 Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Twodimensional code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 80mm 210 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] A-16 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-H5200 Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code None Supported printer font name for Twodimensional code None Supported printer font name for Special function Font name: control Rev.D TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. Printer Driver Specification A-17 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 150 × 72DPI Supported paper size 135.6 x 257mm Supported paper source Slip Supported print Quality None A-18 Printer Driver Specification s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification TM-H6000II Specification Remark Driver name EPSON TM-H6000II Receipt3 Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 ~ 2D-Code8 Layout possible 2-D code PDF417 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Rev.D Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) Printer Driver Specification A-19 Advanced Printer Driver Printer Driver Specification Special function font Font name: control w Position alignment left Number of points: 1 x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 180 x 180DPI Paper Size Roll Paper 80mm x 297mm (566dot × 2104dot) User Defined Paper Size Width: 79.9mm (566dot) High: 25.4 - 999.9mm (180 - 7086dot) Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:4.0mm right:3.7mm 80mm * The values might be slightly different, depending on the application used. Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) A-20 Printer Driver Specification When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Rev.D Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-H6000II Slip3 Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA12 FontA21 FontA22 FontB11 FontB12 FontB21 FontB22 Code Page WPC1252 Prohibited when rotation is selected FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA12[254] FontA22[254] FontB12[254] FontB22[254] Code Page Space Page (254) Prohibited when rotation is selected FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA12[255] FontA22[255] FontB12[255] FontB22[255] Code Page Space Page (255) Prohibited when rotation is selected Barcode Tab Barcode1 ~ Barcode8 Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. 2D-Code Tab Not Supported Special function font Font name: control Character Function Number of points: 1 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) Rev.D Printer Driver Specification A-21 Advanced Printer Driver Printer Driver Specification Special function font Font name: control D Open Drawer 2pin(200ms) Number of points: 1 E Open Drawer 2pin(250ms) No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 resolution 160 × 72DPI Paper Size 230mm × 297mm (1448dot × 841dot) User Defined Paper Size Width: 68 -230mm (340-1150dot) Height: 67.7-296.7mm (192 - 841dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not Supported Water Mark Tab Not Supported A-22 Printer Driver Specification Characters defined by ControlA Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Default margin value 230mm left:138.6mm right:5.6mm 297mm top:4.9mm bottom:18.3mm * The values might be slightly different, depending on the application used. Rev.D Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-H6000II Endorse3 Version5.01 Driver type Ver.3.xx Printer font FontA11 Code Page WPC1252 Prohibited when rotation is selected FontA11[254] Code Page Space Page (254) Prohibited when rotation is selected FontA11[255] Code Page Space Page (255) Prohibited when rotation is selected Barcode Tab Not Supported 2D-Code Tab Not Supported Special function font Font name: control Character Function Number of points: 1 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 resolution 127 x 72DPI Paper Size 230mm × 297mm (1150dot × 841dot) User Defined Paper Size Width: 91.3 - 229.9mm (575 - 1448dot) Hight: 67.7 - 229.7mm (192 - 651dot) Rev.D Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. Default margin value left:138.6mm right:5.6mm 230mm 230mm top:178.9mm bottom:18.3mm * The values might be slightly different, depending on the application used. Printer Driver Specification A-23 Advanced Printer Driver Printer Driver Specification Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not Supported Water Mark Tab Not Supported A-24 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-H6000II Validation3 Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA12 FontA21 FontA22 FontB11 FontB12 FontB21 FontB22 Code Page WPC1252 Prohibited when rotation is selected FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA12[254] FontA22[254] FontB12[254] FontB22[254] Code Page Space Page (254) Prohibited when rotation is selected FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA12[255] FontA22[255] FontB12[255] FontB22[255] Code Page Space Page (255) Prohibited when rotation is selected Barcode Tab Barcode1 ~ Barcode8 Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. 2D-Code Tab Not Supported Special function font Font name: control Character Function Number of points: 1 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) Rev.D Printer Driver Specification A-25 Advanced Printer Driver Printer Driver Specification Special function font Font name: control E Number of points: 1 No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. resolution 160 × 72DPI Paper Size 230mm × 230mm (1448dot × 651dot) User Defined Paper Size Width: 91.3 - 229.9mm (575 - 1448dot) Hight: 67.7 - 229.7mm (192 - 651dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not Supported Water Mark Tab Not Supported A-26 Printer Driver Specification Open Drawer 2pin(250ms) Default margin value 230mm left:138.6mm right:5.6mm 230mm top:178.9mm bottom:18.3mm * The values might be slightly different, depending on applications used. Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-H6000II Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Rev.D Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) Printer Driver Specification A-27 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control A-28 Printer Driver Specification b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI Supported paper size 80 x 297mm 58 x 297mm 80 x 3276mm 58 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Smoothing mode on Smoothing mode off ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Specification Remarks Driver name EPSON TM-H6000II Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Twodimensional code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 80mm Target 58mm 210 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None Rev.D [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Printer Driver Specification A-29 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-H6000II Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code None Supported printer font name for Special function Font name: control A-30 Printer Driver Specification TM Page:16(WPC1252) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Character Function 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 160 × 72DPI Supported paper size 85.7 x 274mm Supported paper source Slip Slip[No feed] Supported print Quality None Rev.D s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). Printer Driver Specification A-31 Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-H6000II Endorse Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(5x7) FontA11[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(5x7) FontA11[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(5x7) Supported printer font name for barcode None Supported printer font name for Special function Font name: control Supported printer font name for Extended Special function Font name: controlA Supported resolution 127 x 72DPI A-32 Printer Driver Specification Character Function 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported paper size 48 x 274mm Supported paper source Endorse Supported print Quality None Rev.D Printer Driver Specification A-33 Advanced Printer Driver Printer Driver Specification TM-H6000III Specification Remark Driver name EPSON TM-H6000III Receipt3 Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 ~ 2D-Code8 Layout possible 2-D code PDF417 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) A-34 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control w Position alignment left Number of points: 1 x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 180 x 180DPI Paper Size Roll Paper 80mm x 297mm (566dot × 2104dot) User Defined Paper Size Width: 79.9mm (566dot) High: 25.4 - 999.9mm (180 - 7086dot) Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:4.0mm right:3.7mm 80mm * The values might be slightly different, depending on the application used. Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Printer Driver Specification A-35 Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-H6000III Slip3 Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA12 FontA21 FontA22 FontB11 FontB12 FontB21 FontB22 Code Page WPC1252 Prohibited when rotation is selected FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA12[254] FontA22[254] FontB12[254] FontB22[254] Code Page Space Page (254) Prohibited when rotation is selected FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA12[255] FontA22[255] FontB12[255] FontB22[255] Code Page Space Page (255) Prohibited when rotation is selected Barcode Tab Barcode1 ~ Barcode8 Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. 2D-Code Tab Not Supported Special function font Font name: control Character Function Number of points: 1 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) A-36 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control D Open Drawer 2pin(200ms) Number of points: 1 E Open Drawer 2pin(250ms) No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 resolution 160 × 72DPI Paper Size 230mm × 297mm (1448dot × 841dot) User Defined Paper Size Width: 68 -230mm (340-1150dot) Height: 67.7-296.7mm (192 - 841dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not Supported Water Mark Tab Not Supported Rev.D Characters defined by ControlA Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Default margin value 230mm left:138.6mm right:5.6mm 297mm top:4.9mm bottom:18.3mm * The values might be slightly different, depending on the application used. Printer Driver Specification A-37 Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-H6000III Endorse3 Version5.01 Driver type Ver.3.xx Printer font FontA11 Code Page WPC1252 Prohibited when rotation is selected FontA11[254] Code Page Space Page (254) Prohibited when rotation is selected FontA11[255] Code Page Space Page (255) Prohibited when rotation is selected Barcode Tab Not Supported 2D-Code Tab Not Supported Special function font Font name: control Character Function Number of points: 1 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 resolution 127 x 72DPI Paper Size 230mm × 297mm (1150dot × 841dot) User Defined Paper Size Width: 91.3 - 229.9mm (575 - 1448dot) Hight: 67.7 - 229.7mm (192 - 651dot) A-38 Printer Driver Specification Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. Default margin value left:138.6mm right:5.6mm 230mm 230mm top:178.9mm bottom:18.3mm * The values might be slightly different, depending on the application used. Rev.D Advanced Printer Driver Printer Driver Specification Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not Supported Water Mark Tab Not Supported Rev.D Printer Driver Specification A-39 Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-H6000III Validation3 Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA12 FontA21 FontA22 FontB11 FontB12 FontB21 FontB22 Code Page WPC1252 Prohibited when rotation is selected FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA12[254] FontA22[254] FontB12[254] FontB22[254] Code Page Space Page (254) Prohibited when rotation is selected FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA12[255] FontA22[255] FontB12[255] FontB22[255] Code Page Space Page (255) Prohibited when rotation is selected Barcode Tab Barcode1 ~ Barcode8 Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. 2D-Code Tab Not Supported Special function font Font name: control Character Function Number of points: 1 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) A-40 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control E Number of points: 1 No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. resolution 160 × 72DPI Paper Size 230mm × 230mm (1448dot × 651dot) User Defined Paper Size Width: 91.3 - 229.9mm (575 - 1448dot) Hight: 67.7 - 229.7mm (192 - 651dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not Supported Water Mark Tab Not Supported Rev.D Open Drawer 2pin(250ms) Default margin value 230mm left:138.6mm right:5.6mm 230mm top:178.9mm bottom:18.3mm * The values might be slightly different, depending on applications used. Printer Driver Specification A-41 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-H6000III Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] A-42 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Rev.D Font name: control b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). Printer Driver Specification A-43 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI Supported paper size 80 x 297mm 58 x 297mm 80 x 3276mm 58 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Smoothing mode on Smoothing mode off ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Specification Remarks Driver name EPSON TM-H6000III Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Twodimensional code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 80mm Target 58mm 210 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] A-44 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-H6000III Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code None Supported printer font name for Special function Font name: control Rev.D TM Page:16(WPC1252) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Character Function 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. Printer Driver Specification A-45 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 160 × 72DPI Supported paper size 85.7 x 274mm Supported paper source Slip Slip[No feed] Supported print Quality None A-46 Printer Driver Specification s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). Rev.D Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-H6000III Endorse Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(5x7) FontA11[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(5x7) FontA11[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(5x7) Supported printer font name for barcode None Supported printer font name for Special function Font name: control Supported printer font name for Extended Special function Font name: controlA Supported resolution 127 x 72DPI Rev.D Character Function 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Printer Driver Specification A-47 Advanced Printer Driver Printer Driver Specification Supported paper size 48 x 274mm Supported paper source Endorse Supported print Quality None A-48 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification TM-J2100/2000 Specification Remarks Driver name EPSON TM-J2000/2100 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Rev.D Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) Printer Driver Specification A-49 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control A-50 Printer Driver Specification c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). ] NV bit images No. 2 printing.(Double Height Double Width mode). Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 360 x 360DPI 180 x 180DPI Supported paper size 58 x 297mm[180] 70 x 297mm 76 x 297mm[180] 82.5 x 297mm[180] 58 x 2311.8mm 70 x 2311.8mm 76 x 2311.8mm 82.5 x 2311.8mm Supported paper source Report Report Report Form Form Supported print Quality Unidirectional + Normal Unidirectional + High Speed Unidirectional + Economy Bi-directional + Normal Bi-directional + High Speed Bi-directional + Economy ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [cut] [No Feed] [No cut] [cut] Specification Remarks Driver name EPSON TM-J2000/2100 Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 112 x 112 DPI Rev.D Printer Driver Specification A-51 Advanced Printer Driver Printer Driver Specification Supported paper size Target 82mm Target 76mm Target 70mm Target 58mm[112] 232x3276mm Supported paper source Report Report Report Form Form Supported print Quality Unidirectional Bi-directional [No cut] [cut] [No Feed] [No cut] [cut] Specification Remarks Driver name EPSON TM-J2000/2100 Reverse Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for barcode Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 360 x 360DPI 180 x 180DPI Supported paper size 58 x 297mm[180] 70 x 297mm 76 x 297mm[180] 82.5 x 297mm[180] Supported paper source Form Form Form Supported print Quality Unidirectional + Normal Unidirectional + High Speed Unidirectional + Economy Bi-directional + Normal Bi-directional + High Speed Bi-directional + Economy [No cut] [Full cut] [No Feed] A-52 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification TM-J7000/7100 Specification Remark Driver name EPSON TM-J7000/7100 Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 ~ 2D-Code8 Layout possible 2-D code PDF417 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Rev.D Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) Printer Driver Specification A-53 Advanced Printer Driver Printer Driver Specification Special function font Font name: control w Position alignment left Number of points: 1 x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 180 x 180DPI A-54 Printer Driver Specification Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Rev.D Advanced Printer Driver Printer Driver Specification Paper Size Roll Paper 82.5m x 297mm (585dot × 2105dot) User Defined Paper Size Width: 82.4mm (585dot) High: 25.4 - 999.9mm (180 - 7086dot) Roll Paper 76m x 297mm (539dot × 2105dot) User Defined Paper Size Width: 75.9mm (539dot) High: 25.4 - 999.9mm (180 - 7086dot) When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:6.0mm right:4.3mm 82.5mm 76mm left:4.3mm right:4.2mm 70mm left:4.2mm right:4.3mm 58mm left:3.4mm right:3.3mm * The values might be slightly different, depending on the application used. Roll Paper 70m x 297mm (496dot × 2105dot) User Defined Paper Size Width: 70.0mm (496dot) High: 25.4 - 999.9mm (180 - 7086dot) Roll Paper 58m x 297mm (411dot × 2105dot) User Defined Paper Size Width: 58.0mm (411dot) High: 25.4 - 999.9mm (180 - 7086dot) Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Printer Driver Specification A-55 Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-J7000/7100 Slip3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Code Page Space Page (255) Prohibited when rotation is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. 2D-Code Tab 2D-Code1 ~ 2D-Code8 Layout possible 2-D code PDF417 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center A-56 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control y Position alignment right Number of points: 1 A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 resolution 180 x 180DPI Paper Size 230mm × 297mm (1630dot × 1872dot) User Defined Paper Size Width: 83.3-229.9mm (208-1630dot) Height: 68-296.7mm (482 - 2105dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D Characters defined by ControlA Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Default margin value left:147mm 230mm 297mm top:4.9mm right:2.0mm bottom:28.0mm * The values might be slightly different, depending on the application used. When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Printer Driver Specification A-57 Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-J7000/7100 Endorse3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontB11 FontB24 FontA12 FontA42 FontB12 FontB42 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] Barcode Tab FontA21 FontA44 FontB21 FontB44 FontA22 FontA84 FontB22 FontB84 FontA12[255] FontA22[255] FontA42[255] FontA84[255] FontB12[255] FontB22[255] FontB42[255] FontB84[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. 2D-Code Tab 2D-Code1 ~ 2D-Code8 Layout possible 2-D code PDF417 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right A-58 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function fon Font name: control Number of points: 1 No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. resolution 180 x 180DPI Paper Size 101.6mm × 223mm (720dot × 1580dot) User Defined Paper Size Width: 91.3 - 101.6mm (650 - 720dot) Hight: 158.5 - 223mm (1123 - 1580dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not Supported Water Mark Tab Not Supported Rev.D Default margin value 101.6mm left:18.6mm 223mm top:4.9mm right:5.0mm bottom:3.5mm * The values might be slightly different, depending on the application used. Printer Driver Specification A-59 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-J7000/7100 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA11s FontA21s FontA24s FontA44s FontA84s FontB11s FontB21s FontB24s FontB44s FontB84s FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12s FontA22s FontA42s FontA48s FontA88s FontB12s FontB22s FontB42s FontB48s FontB88s When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontA11s[255] FontA21s[255] FontA24s[255] FontA44s[255] FontA84s[255] FontB11s[255] FontB21s[255] FontB24s[255] FontB44s[255] FontB84s[255] A-60 Printer Driver Specification FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12s[255] FontA22s[255] FontA42s[255] FontA48s[255] FontA88s[255] FontB12s[255] FontB22s[255] FontB42s[255] FontB48s[255] FontB88s[255] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Rev.D Advanced Printer Driver Printer Driver Specification FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11s[Ext.] FontA21s[Ext.] FontA24s[Ext.] FontA44s[Ext.] FontA84s[Ext.] FontB11s[Ext.] FontB21s[Ext.] FontB24s[Ext.] FontB44s[Ext.] FontB84s[Ext.] FontA12s[Ext.] FontA22s[Ext.] FontA42s[Ext.] FontA48s[Ext.] FontA88s[Ext.] FontB12s[Ext.] FontB22s[Ext.] FontB42s[Ext.] FontB48s[Ext.] FontB88s[Ext.] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 Supported printer font name for Special function Font name: control Supported Printer font name FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] Rev.D Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) Printer Driver Specification A-61 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI Supported paper size 82.5(512) x 297mm 76(480) x 297mm 70(432) x 297mm 58(360) x 297mm 82.5(512) x 3276mm 76(480) x 3276mm 70(432) x 3276mm 58(360) x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Unidirectional + Normal Unidirectional + High Speed Unidirectional + Economy Bi-directional + Normal Bi-directional + High Speed Bi-directional + Economy p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) P Cut Receipt (partial cut) [No cut] [cut] [No Feed] [No cut] [cut] A-62 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EEPSON TM-J7000/7100 Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 82(512)mm Target 76(480)mm Target 70(432)mm Target 58(360)mm 210(512) x 3276 mm Supported paper source Report Report Report Form Form Supported print Quality Unidirectional + Normal Unidirectional + High Speed Unidirectional + Economy Bi-directional + Normal Bi-directional + High Speed Bi-directional + Economy Rev.D [No cut] [cut] [No Feed] [No cut] [cut] Printer Driver Specification A-63 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-J7000/7100 Slip Version5.00 Driver type Ver.2.xx Compatible FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12s FontA22s FontA42s FontA48s FontA88s FontB12s FontB22s FontB42s FontB48s FontB88s When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA11s FontA21s FontA24s FontA44s FontA84s FontB11s FontB21s FontB24s FontB44s FontB84s FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontA11s[255] FontA21s[255] FontA24s[255] FontA44s[255] FontA84s[255] FontB11s[255] FontB21s[255] FontB24s[255] FontB44s[255] FontB84s[255] A-64 Printer Driver Specification FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12s[255] FontA22s[255] FontA42s[255] FontA48s[255] FontA88s[255] FontB12s[255] FontB22s[255] FontB42s[255] FontB48s[255] FontB88s[255] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Rev.D Advanced Printer Driver Printer Driver Specification FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11s[Ext.] FontA21s[Ext.] FontA24s[Ext.] FontA44s[Ext.] FontA84s[Ext.] FontB11s[Ext.] FontB21s[Ext.] FontB24s[Ext.] FontB44s[Ext.] FontB84s[Ext.] FontA12s[Ext.] FontA22s[Ext.] FontA42s[Ext.] FontA48s[Ext.] FontA88s[Ext.] FontB12s[Ext.] FontB22s[Ext.] FontB42s[Ext.] FontB48s[Ext.] FontB88s[Ext.] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 Supported printer font name for Special function Font name: control Supported Printer font name FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] Rev.D Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) p Does not add HRI characters to the bar code. Printer Driver Specification A-65 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI Supported paper size 81(576) x 264 mm Supported paper source Slip Supported print Quality Unidirectional + Normal Unidirectional + High Speed Unidirectional + Economy Bi-directional + Normal Bi-directional + High Speed Bi-directional + Economy A-66 Printer Driver Specification q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-J7000/7100 Endorse Version5.00 Driver type Ver.2.xx Compatible FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12s FontA22s FontA42s FontA48s FontA88s FontB12s FontB22s FontB42s FontB48s FontB88s When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA11s FontA21s FontA24s FontA44s FontA84s FontB11s FontB21s FontB24s FontB44s FontB84s FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontA11s[255] FontA21s[255] FontA24s[255] FontA44s[255] FontA84s[255] FontB11s[255] FontB21s[255] FontB24s[255] FontB44s[255] FontB84s[255] Rev.D FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12s[255] FontA22s[255] FontA42s[255] FontA48s[255] FontA88s[255] FontB12s[255] FontB22s[255] FontB42s[255] FontB48s[255] FontB88s[255] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Printer Driver Specification A-67 Advanced Printer Driver Printer Driver Specification FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11s[Ext.] FontA21s[Ext.] FontA24s[Ext.] FontA44s[Ext.] FontA84s[Ext.] FontB11s[Ext.] FontB21s[Ext.] FontB24s[Ext.] FontB44s[Ext.] FontB84s[Ext.] FontA12s[Ext.] FontA22s[Ext.] FontA42s[Ext.] FontA48s[Ext.] FontA88s[Ext.] FontB12s[Ext.] FontB22s[Ext.] FontB42s[Ext.] FontB48s[Ext.] FontB88s[Ext.] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 Supported printer font name for Special function Font name: control Supported Printer font name FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] A-68 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended Special function Font name: controlA Supported resolution 180 x 180DPI Supported paper size 78(552) x 29.6mm Supported paper source Endorse Supported print Quality Unidirectional + Normal Unidirectional + High Speed Unidirectional + Economy Bi-directional + Normal Bi-directional + High Speed Bi-directional + Economy Rev.D p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Printer Driver Specification A-69 Advanced Printer Driver Printer Driver Specification TM-J7500/7600 Specification Remark Driver name EPSON TM-J7500/7600 Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected FontA11[OCR] FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 - Barcode8 Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 - 2D-Code8 Layout possible 2-D code PDF417 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) A-70 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control k NV graphics 3 printing (48,51) Number of points: 1 l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 180 x 180DPI Rev.D Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Printer Driver Specification A-71 Advanced Printer Driver Printer Driver Specification Paper Size Roll Paper 82.5m x 297mm (585dot × 2105dot) User Defined Paper Size Width: 82.4mm (585dot) High: 25.4 - 999.9mm (180 - 7086dot) Roll Paper 76m x 297mm (539dot × 2105dot) User Defined Paper Size Width: 75.9mm (539dot) High: 25.4 - 999.9mm (180 - 7086dot) When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:6.0mm right:4.3mm 82.5mm 76mm left:4.3mm right:4.2mm 70mm left:4.2mm right:4.3mm 58mm left:3.4mm right:3.3mm * The values might be slightly different, depending on the application used. Roll Paper 70m x 297mm (496dot × 2105dot) User Defined Paper Size Width: 70.0mm (496dot) High: 25.4 - 999.9mm (180 - 7086dot) Roll Paper 58m x 297mm (411dot × 2105dot) User Defined Paper Size Width: 58.0mm (411dot) High: 25.4 - 999.9mm (180 - 7086dot) Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) A-72 Printer Driver Specification When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Rev.D Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-J7500/7600 Slip3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 Code Page WPC1252 Prohibited when rotation is selected FontA11[OCR] FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page Space Page (255) Prohibited when rotation is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. 2D-Code Tab 2D-Code1 ~ 2D-Code8 Layout possible 2-D code PDF417 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Rev.D Font name: control Character Function Number of points: 1 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left Printer Driver Specification A-73 Advanced Printer Driver Printer Driver Specification Special function font Font name: control x Position alignment center Number of points: 1 y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 resolution 180 x 180DPI Paper Size 230mm × 297mm (1629dot × 2104dot) User Defined Paper Size Width: 139.7-229.9mm (991-1629dot) Height: 68-296.7mm (482 - 2104dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) A-74 Printer Driver Specification Characters defined by ControlA Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Default margin value 230mm left:90.1mm 297mm top:5.0mm right:4.3mm bottom:18.4mm * The values might be slightly different, depending on the application used. When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-J7500/7600 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 FontA11[OCR] OCR(15x24) FontA11s FontA21s FontA24s FontA44s FontA84s FontB11s FontB21s FontB24s FontB44s FontB84s When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) FontA12s FontA22s FontA42s FontA48s FontA88s FontB12s FontB22s FontB42s FontB48s FontB88s FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontA11s[255] FontA21s[255] FontA24s[255] FontA44s[255] FontA84s[255] FontB11s[255] FontB21s[255] FontB24s[255] FontB44s[255] FontB84s[255] Rev.D TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12s[255] FontA22s[255] FontA42s[255] FontA48s[255] FontA88s[255] FontB12s[255] FontB22s[255] FontB42s[255] FontB48s[255] FontB88s[255] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Printer Driver Specification A-75 Advanced Printer Driver Printer Driver Specification FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11s[Ext.] FontA21s[Ext.] FontA24s[Ext.] FontA44s[Ext.] FontA84s[Ext.] FontB11s[Ext.] FontB21s[Ext.] FontB24s[Ext.] FontB44s[Ext.] FontB84s[Ext.] FontA12s[Ext.] FontA22s[Ext.] FontA42s[Ext.] FontA48s[Ext.] FontA88s[Ext.] FontB12s[Ext.] FontB22s[Ext.] FontB42s[Ext.] FontB48s[Ext.] FontB88s[Ext.] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 Supported printer font name for Special function Font name: control Supported Printer font name FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] A-76 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI Supported paper size 82.5(512) x 297mm 76(480) x 297mm 70(432) x 297mm 58(360) x 297mm 82.5(512) x 3276mm 76(480) x 3276mm 70(432) x 3276mm 58(360) x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Unidirectional + Normal Unidirectional + High Speed Unidirectional + Economy Bi-directional + Normal Bi-directional + High Speed Bi-directional + Economy Rev.D p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) P Cut Receipt (partial cut) [No cut] [cut] [No Feed] [No cut] [cut] Printer Driver Specification A-77 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-J7500/7600 Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 82(512)mm Target 76(480)mm Target 70(432)mm Target 58(360)mm 210(512) x 3276 mm Supported paper source Report Report Report Form Form Supported print Quality Unidirectional + Normal Unidirectional + High Speed Unidirectional + Economy Bi-directional + Normal Bi-directional + High Speed Bi-directional + Economy [No cut] [cut] [No Feed] [No cut] [cut] A-78 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-J7500/7600 Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 FontA11[OCR] OCR(15x24) FontA11s FontA21s FontA24s FontA44s FontA84s FontB11s FontB21s FontB24s FontB44s FontB84s When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) FontA12s FontA22s FontA42s FontA48s FontA88s FontB12s FontB22s FontB42s FontB48s FontB88s FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontA11s[255] FontA21s[255] FontA24s[255] FontA44s[255] FontA84s[255] FontB11s[255] FontB21s[255] FontB24s[255] FontB44s[255] FontB84s[255] Rev.D TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12s[255] FontA22s[255] FontA42s[255] FontA48s[255] FontA88s[255] FontB12s[255] FontB22s[255] FontB42s[255] FontB48s[255] FontB88s[255] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Printer Driver Specification A-79 Advanced Printer Driver Printer Driver Specification FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11s[Ext.] FontA21s[Ext.] FontA24s[Ext.] FontA44s[Ext.] FontA84s[Ext.] FontB11s[Ext.] FontB21s[Ext.] FontB24s[Ext.] FontB44s[Ext.] FontB84s[Ext.] FontA12s[Ext.] FontA22s[Ext.] FontA42s[Ext.] FontA48s[Ext.] FontA88s[Ext.] FontB12s[Ext.] FontB22s[Ext.] FontB42s[Ext.] FontB48s[Ext.] FontB88s[Ext.] When a column up is selected by a memory switch, be sure to use only the following fonts. FontA(11x24) FontA(11x48) FontA(21x24) FontA(22x48) FontA(22x96) FontA(44x48) FontA(44x96) FontA(44x192) FontA(88x96) FontA(88x192) FontB(8x17) FontB(8x34) FontB(16x17) FontB(16x34) FontB(16x68) FontB(32x34) FontB(32x68) FontB(32x136) FontB(64x68) FontB(64x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 Supported printer font name for Special function Font name: control Supported Printer font name FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] A-80 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI Supported paper size 135(960) x 273.6 mm Supported paper source Slip Supported print Quality Unidirectional + Normal Unidirectional + High Speed Unidirectional + Economy Bi-directional + Normal Bi-directional + High Speed Bi-directional + Economy Rev.D p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Printer Driver Specification A-81 Advanced Printer Driver Printer Driver Specification TM-L60II Specification Remarks Driver name EPSON TM-L60II Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] A-82 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI Supported paper size 60(54.1) x 297mm 60(54.1) x 3276mm Supported paper source Report Report Form Supported print Quality Smoothing mode on Smoothing mode off Rev.D d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) [No cut] [No Feed] [No cut] Printer Driver Specification A-83 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-L60II Label Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] A-84 Printer Driver Specification Character Function 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180DPI Supported paper size 60(51.9) x 25.4mm 60(51.9) x 50.8mm 60(51.9) x 76.2mm 60(51.9) x 101.6mm Supported paper source Plural Single Supported print Quality Smoothing mode on Smoothing mode off Rev.D c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) [No cut] [No cut] Printer Driver Specification A-85 Advanced Printer Driver Printer Driver Specification TM-L90 Specification Remark Driver name EPSON TM-L90Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 - Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 - 2D-Code8 Layout possible 2-D code PDF417 Maxi Code QR Code Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) A-86 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control k NV graphics 3 printing (48,51) Number of points: 1 l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 203x203DPI Paper Size Roll Paper 80 x 297mm (639dot × 2373dot) User Defined Paper Size width : 37.9 - 80mm (303 - 639dot) hight : 25.4 - 1000mm (203 - 7992dot) Roll Paper 60 x 297mm (479dot × 2373dot) User Defined Paper Size width : 37.9 - 59.9mm (303 - 479dot) hight : 25.4 - 1000mm (203 - 7992dot) Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:2.65mm right:4.85mm 80mm left:2.65mm right:2.85mm 60mm left:2.65mm right:2.85mm 38mm * The values might be slightly different, depending on the application used. Roll Paper 38 x 297mm (303dot × 2373dot) User Defined Paper Size width : 37.9mm (303dot) hight : 25.4 - 1000mm (203 - 7992dot) Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in US:Postcard 100 x 148 mm Rev.D Printer Driver Specification A-87 Advanced Printer Driver Printer Driver Specification Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Specification Remark Driver name EPSON TM-L90 Peeler Receipt Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 - Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 - 2D-Code8 Layout possible 2-D code PDF417 Maxi Coder QR Code Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) A-88 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control b Open Drawer 5pin(100ms) Number of points: 1 c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 203x203DPI Rev.D Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Printer Driver Specification A-89 Advanced Printer Driver Printer Driver Specification Paper Size Roll Paper 80 x 297mm (639dot × 2373dot) User Defined Paper Size width : 37.9 - 80mm (303 - 639dot) hight : 25.4 - 1000mm (203 - 7992dot) Roll Paper 60 x 297mm (479dot × 2373dot) User Defined Paper Size width : 37.9 - 59.9mm (303 - 479dot) hight : 25.4 - 1000mm (203 - 7992dot) When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:2.65mm right:4.85mm 80mm 60mm left:2.65mm right:2.85mm 38mm left:2.65mm right:2.85mm * The values might be slightly different, depending on the application used. Roll Paper 38 x 297mm (303dot × 2373dot) User Defined Paper Size width : 37.9mm (303dot) hight : 25.4 - 1000mm (203 - 7992dot) Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in US:Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. The TM-L90 with Peeler performs as below with the combination of the "BM Sensor" setting of the printer setting tab and the "Feed Paper to Cutting Position" of the operation tab. BM Sensor Feed Paper to Cutting Position Description Enable On Feeds paper to the next peeling position Off Feeds paper to the next peeling position On Feeds paper to the manual cutting position Off No paper feed Disable A-90 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON L90 Label3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 - Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 - 2D-Code8 Layout possible 2-D code PDF417 Maxi Code QR Code Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Rev.D Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) Printer Driver Specification A-91 Advanced Printer Driver Printer Driver Specification Special function font Font name: control w Position alignment left Number of points: 1 x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 203x203DPI A-92 Printer Driver Specification Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Rev.D Advanced Printer Driver Printer Driver Specification Paper Size 4inchi Label 80 x 101.6mm (639dot × 812dot) 3inchi Label 80 x 76.2mm (639dot × 609dot) 2inchi Label 80 x 50.8mm (639dot × 406dot) 1inchi Label 80 x 25.4mm (639dot × 203dot) User Defined Paper Size width : 37.9 - 80mm (303 - 639dot) hight : 25.4 - 101.6mm (203 - 812dot) When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:6.1mm right:5.1mm 80mm top:1.5mm bottom:2.8mm 60mm left:6.1mm right:5.1mm top:1.5mm bottom:2.8mm left:6.1mm right:5.1mm 38mm top:1.5mm bottom:2.8mm * The values might be slightly different, depending on the application used. 4inchi Label 60 x 101.6mm (479dot × 812dot) 3inchi Label 60 x 76.2mm (479dot × 609dot) 2inchi Label 60 x 50.8mm (479dot × 406dot) 1inchi Label 60 x 25.4mm (479dot × 203dot) User Defined Paper Size width : 37.9 - 59.9mm (303 - 479dot) hight : 25.4 - 101.6mm (203 - 812dot) 1inchi Label 38 x 25.4mm (303dot × 203dot) User Defined Paper Size width : 37.9mm (303dot) hight : 25.4 - 101.6mm (203 - 812dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Printer Driver Specification A-93 Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON L90 Peeler Label Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 - Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 - 2D-Code8 Layout possible 2-D code PDF417 Maxi Code QR Code Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left A-94 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control x Position alignment center Number of points: 1 y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 203x203DPI Paper Size 4inchi Label 80 x 101.6mm (639dot × 812dot) 3inchi Label 80 x 76.2mm (639dot × 609dot) 2inchi Label 80 x 50.8mm (639dot × 406dot) 1inchi Label 80 x 25.4mm (639dot × 203dot) User Defined Paper Size width : 37.9 - 80mm (303 - 639dot) hight : 25.4 - 101.6mm (203 - 812dot) Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:6.1mm right:5.1mm 80mm top:1.5mm bottom:2.8mm 60mm left:6.1mm right:5.1mm top:1.5mm bottom:2.8mm 38mm left:6.1mm right:5.1mm top:1.5mm bottom:2.8mm * The values might be slightly different, depending on the application used. 4inchi Label 60 x 101.6mm (479dot × 812dot) 3inchi Label 60 x 76.2mm (479dot × 609dot) 2inchi Label 60 x 50.8mm (479dot × 406dot) 1inchi Label 60 x 25.4mm (479dot × 203dot) User Defined Paper Size width : 37.9 - 59.9mm (303 - 479dot) hight : 25.4 - 101.6mm (203 - 812dot) 1inchi Label 38 x 25.4mm (303dot × 203dot) User Defined Paper Size width : 37.9mm (303dot) hight : 25.4 - 101.6mm (203 - 812dot) Rev.D Printer Driver Specification A-95 Advanced Printer Driver Printer Driver Specification Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. The TM-L90 with Peeler performs as below, depending on the "Feed before cut" setting of the operation tab. Feed before cut Description On Feeds paper to the next peeling position Off No paper feed A-96 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-L90 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:2 TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 QR Code Maxi Code Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Rev.D The maximum number of columns that can be input depends on the paper width below: 80mm:576 60mm:436 38mm:258 Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) Printer Driver Specification A-97 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control A-98 Printer Driver Specification b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 203 x 203DPI Supported paper size 60 x 297mm 38 x 297mm 80 x 297mm(203) 80 x 3276mm(203) 60 x 3276mm 38 x 3276mm Supported paper source Report Report Report Form Form [No cut] [cut] [No Feed] [No cut] [cut] BM Single BM Plural BM Plural Supported print Quality [cut] [cut] [No cut] ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). For receipt paper without black mark. For receipt paper with black mark. Smoothing mode on Smoothing mode off If a BM Single[Cut] is specified, Paper feeding and paper cutting are executed per each Black mark. If a BM Plural[Cut] is specified, after all the pages are printed, paper feeding and paper cutting are executed at final Black mark. If a BM Plural[No Cut] is specified, paper feeding and paper cutting are not executed at all. Specification Remarks Driver name EPSON TM-L90 Reverse Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Rev.D Printer Driver Specification A-99 Advanced Printer Driver Printer Driver Specification Supported printer font name for Extended special function Not Supported Supported resolution 203 x 203DPI Supported paper size 80 x 297mm(203) 60 x 297mm 38 x 297mm(203) XX x YY (L90 Receipt Reverse) Supported paper source Form Form Form BMPlural BMPlural BMSingle Supported print Quality None [No cut] [cut] [No Feed] [No cut] [cut] [cut] Notes on upside-down printing 1. The driver enables to rotating the printing result 180 degrees to perform upside-down printing on each page. The maximum length of the page is 297mm. 2. If XX x YY (TM-L90 Receipt Reverse) is selected for paper size, specify the number of dots for the printing area of the upside-down printing in the section of TMCTRL.INI below. Then the area for the upside-down printing can be set freely. (Default is the printing area for 80 mm width paper.) [TM-L90 Receipt Reverse] Width=576 3. When the paper size XX x YY (TM-L90 Receipt Reverse) is selected and if there is no definition described in 1., use the value of the printer that has been already defined (the paper size selected from the printer property sheet) as the printing area to process the upside-down printing. 4. Be sure that the paper size selected from the printer property sheet and the paper size selected by an application are the same. If they are different, horizontal and vertical lengths of printing paper might not be obtained correctly and the upside-down priting might not be done correctly. Specification Remarks Driver name EPSON TM-L90 Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported A-100 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Extended special function Not Supported Supported resolution 70 x70DPI Supported paper size Target 60mm Target 58mm Target 80mm(70) 210 x 3276mm(70) Supported paper source Report Report Report Form Form Supported print Quality None [No cut] [cut] [No Feed] [No cut] [cut] Specification Remarks Driver name EPSON TM-L90 Label Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] Rev.D TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Printer Driver Specification A-101 Advanced Printer Driver Printer Driver Specification Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Twodimensional code PDF417 QR Code Maxi Code Supported printer font name for Special function Font name: control A-102 Printer Driver Specification The maximum number of columns that can be input depends on the paper width below: 80mm:560 60mm:402 38mm:226 Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. z Cut Receipt with black mark A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 203 x 203DPI Supported paper size 80 x 25.4mm 60 x 25.4mm 38 x 25.4mm 80 x 50.8mm 60 x 50.8mm 80 x 76.2mm 60 x 76.2mm 80 x 101.6mm 60 x 101.6mm Supported paper source Plural Plural Single Supported print Quality Smoothing mode on Smoothing mode off G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [cut] [cut] If a Single[Cut] is specified, Paper feeding and paper cutting are executed per each label. If a Plural[Cut] is specified, after all the pages are printed, paper feeding and paper cutting are executed at final label. If a Plural[No Cut] is specified, paper feeding and paper cutting are not executed at all. Rev.D Printer Driver Specification A-103 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-L90 Label Reverse Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 203 x 203DPI Supported paper size 80 x 25.4mm 80 x 50.8mm 80 x 76.2mm 80 x 101.6mm 60 x 25.4mm 60 x 50.8mm 60 x 76.2mm 60 x 101.6mm 38 x 25.4mm XX x YY (L90 Label Reverse) Supported paper source Plural Plural Single Supported print Quality None [cut] [No cut] [cut] Notes on upside-down printing 1. The driver enables to rotating the printing result 180 degrees to perform upside-down printing on each page. The maximum length of the page is 297mm. 2. If XX x YY (TM-L90 Label Reverse) is selected for paper size, specify the number of dots for the printing area of the upside-down printing in the section of TMCTRL.INI below. Then the area for the upside-down printing can be set freely. (Default is the printing area for 80 mm width paper.) [TM-L90 Label Reverse] Width=576 Height=788 3. When the paper size XX x YY (TM-L90 Label Reverse) is selected and if there is no definition described in 1., use the value of the printer that has been already defined (the paper size selected from the printer property sheet) as the printing area to process the upside-down printing. 4. Be sure that the paper size selected from the printer property sheet and the paper size selected by an application are the same. If they are different, horizontal and vertical lengths of printing paper might not be obtained correctly and the upside-down priting might not be done correctly. A-104 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification TM-P60 Specification Remark Driver name EPSON TMP60 Receipt3 Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontC11 FontC24 FontC84 FontA12 FontA42 FontA88 FontB22 FontB48 FontC12 FontC42 FontC88 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontC11[255] FontC21[255] FontC24[255] FontC44[255] FontC84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontC21 FontC44 FontA22 FontA48 FontB12 FontB42 FontB88 FontC22 FontC48 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] FontC12[255] FontC22[255] FontC42[255] FontC48[255] FontC88[255] Barcode1 - Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab Not supported Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) Rev.D w Position alignment left x Position alignment center y Position alignment right Printer Driver Specification A-105 Advanced Printer Driver Printer Driver Specification Special function font Font name: control P Number of points: 1 No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. resolution 203x203DPI Paper Size Roll Paper 60mm x 297mm (479dot × 2374dot) User Defined Paper Size Width: 59.9mm (479dot) High: 25.4 -1000.0mm (203 - 7992dot) Roll Paper 58mm x 297mm (463dot × 2374dot) User Defined Paper Size Width: 57.9mm (463dot) High: 25.4 -1000.0mm (203 - 7992dot) Paper feeding +Partial cut When top and bottom margins are 0, a maximum printing area can be used. Default margin value 60mm left:2.75mm right:2.75mm left:2.75mm right:2.2mm 58mm * The values might be slightly different, depending on the application used. Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) A-106 Printer Driver Specification When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, Control Font and Control A Font. Rev.D Advanced Printer Driver Printer Driver Specification TM-P60Peeler Specification Remark Driver name EPSON TM-P60Peeler Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontC11 FontC24 FontC84 FontA12 FontA42 FontA88 FontB22 FontB48 FontC12 FontC42 FontC88 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontC11[255] FontC21[255] FontC24[255] FontC44[255] FontC84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontC21 FontC44 FontA22 FontA48 FontB12 FontB42 FontB88 FontC22 FontC48 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] FontC12[255] FontC22[255] FontC42[255] FontC48[255] FontC88[255] Barcode1 - Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 - 2D-Code8 Layout possible 2-D code PDF417 QR Code RSS-14 Stacked RSS-14 Stacked Omidirectional RSS Expanded Stacked Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right Rev.D Printer Driver Specification A-107 Advanced Printer Driver Printer Driver Specification Special function font Font name: control Number of points: 1 No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. resolution 203x203DPI Paper Size Roll Paper 60mm x 297mm (479dot × 2374dot) User Defined Paper Size Width: 59.9mm (479dot) High: 25.4 -1000.0mm (203 - 7992dot) Roll Paper 58mm x 297mm (463dot × 2374dot) User Defined Paper Size Width: 57.9mm (463dot) High: 25.4 -1000.0mm (203 - 7992dot) When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:2.62mm right:3.2mm 60mm 58mm left:2.62mm right:2.7mm 30mm left:2.62mm right:3.2mm * The values might be slightly different, depending on the application used. Roll Paper 30mm x 297mm (239dot × 2374dot) User Defined Paper Size Width: 29.9mm (239dot) High: 25.4 -1000.0mm (203 - 7992dot) Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) A-108 Printer Driver Specification When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Rev.D Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-P60Peeler Label3 Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontC11 FontC24 FontC84 FontA12 FontA42 FontA88 FontB22 FontB48 FontC12 FontC42 FontC88 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontC11[255] FontC21[255] FontC24[255] FontC44[255] FontC84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontC21 FontC44 FontA22 FontA48 FontB12 FontB42 FontB88 FontC22 FontC48 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] FontC12[255] FontC22[255] FontC42[255] FontC48[255] FontC88[255] Barcode1 - Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 - 2D-Code8 Layout possible 2-D code PDF417 QR Code RSS-14 Stacked RSS-14 Stacked Omidirectional RSS Expanded Stacked Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) w Position alignment left x Position alignment center y Position alignment right Rev.D Printer Driver Specification A-109 Advanced Printer Driver Printer Driver Specification Special function font Font name: control Number of points: 1 No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. resolution 203x203DPI Paper Size 4inchi Label 60 x 101.6mm (639dot × 812dot) 3inchi Label 60 x 76.2mm (639dot × 609dot) 2inchi Label 60 x 50.8mm (639dot × 406dot) 1inchi Label 60 x 25.4mm (639dot × 203dot) User Defined Paper Size width : 37.9 - 80mm (303 - 639dot) hight : 25.4 - 101.6mm (203 - 812dot) When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:4.6mm right:3.1mm 60mm top:1.5mm bottom:1.5mm 58mm left:4.6mm right:3.1mm top:1.5mm bottom:1.5mm left:4.6mm right:4.1mm 30mm top:1.5mm bottom:1.5mm * The values might be slightly different, depending on the application used. 4inchi Label 58 x 101.6mm (479dot × 812dot) 3inchi Label 58 x 76.2mm (479dot × 609dot) 2inchi Label 58 x 50.8mm (479dot × 406dot) 1inchi Label 58 x 25.4mm (479dot × 203dot) User Defined Paper Size width : 37.9 - 59.9mm (303 - 479dot) hight : 25.4 - 101.6mm (203 - 812dot) 1inchi Label 30 x 25.4mm (303dot × 203dot) User Defined Paper Size width : 37.9 (303dot) hight : 25.4 - 101.6mm (203 - 812dot) Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm A-110 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Printer Driver Specification A-111 Advanced Printer Driver Printer Driver Specification TM-T70 Specification Remark Driver name EPSON TM-T70 Receipt3 Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 ~ 2D-Code8 Layout possible 2-D code PDF417 QR Code Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) A-112 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control w Position alignment left Number of points: 1 x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 180 x 180DPI Paper Size Roll Paper 80 x 297mm (566dot × 2104dot) User Defined Paper Size width : 79.9 (566dot) height : 25.4 - 999.9mm (180 - 7086dot) Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:3.9mm right:3.9mm 80mm * The values might be slightly different, depending on the application used. Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Printer Driver Specification A-113 Advanced Printer Driver Printer Driver Specification TM-T86F Specification Remark Driver name EPSON TM-T86F Receipt Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab Not Supported Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR g No paper feeding + Partial cut Font name: control w Position alignment left Number of points: 1 x Position alignment center y Position alignment right G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). Special function font A-114 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control Number of points: 1 ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 180 x 180DPI 90 x 90DPI Paper Size Roll Paper 80 x 297mm (566dot × 2104dot) User Defined Paper Size width : 79.9 (566dot) height : 25.4 - 999.9mm (180 - 7086dot) Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value 80mm left:3.8mm right:3.8mm * The values might be slightly different, depending on the application used. Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Printer Driver Specification A-115 Advanced Printer Driver Printer Driver Specification TM-T88II/IIR/III Specification Remark Driver name EPSON TM-T88III Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut A-116 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control Number of points: 1 No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. resolution 180 x 180DPI Paper Size Roll Paper 80 x 297mm (566dot × 2104dot) User Defined Paper Size width : 79.9 (566dot) height : 25.4 - 3276.0mm (180 - 23216dot) Roll Paper 58 x 297mm (411dot × 2104dot) User Defined Paper Size width : 58mm (411dot) height : 25.4 - 3276.0mm (180 - 23216dot) When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:3.7mm right:3.7mm 80mm 58mm left:3.7mm right:3.0mm * The values might be slightly different, depending on the application used. Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, Control Font and Control A Font. Printer Driver Specification A-117 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-T88II(R) Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] A-118 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Rev.D Font name: control d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). Printer Driver Specification A-119 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180 DPI 90 x 90DPI Supported paper size 80 x 297mm 80 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Smoothing mode on Smoothing mode off _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Specification Remarks Driver name EPSON TM-T88II(R) Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 80mm 210 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] A-120 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-T88III Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Rev.D Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) Printer Driver Specification A-121 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control A-122 Printer Driver Specification d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180 DPI 90 x 90DPI Supported paper size 80 x 297mm 80 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Smoothing mode on Smoothing mode off _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Specification Remarks Driver name EPSON TM-T88III Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 80mm 210 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None Rev.D [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Printer Driver Specification A-123 Advanced Printer Driver Printer Driver Specification TM-T88IIIX Specification Remark Driver name EPSON TM-T88III Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut A-124 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control Number of points: 1 No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. resolution 180x180DPI 90x90DPI Paper Size Roll Paper 80 x 297mm (566dot × 2104dot) User Defined Paper Size width : 79.9 (566dot) height : 25.4 - 999.9mm (180 - 7086dot) Roll Paper 58 x 297mm (411dot × 2104dot) User Defined Paper Size width : 58mm (411dot) height : 25.4 - 1000mm (180 - 7086dot) When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:3.7mm right:3.7mm 80mm 58mm left:3.7mm right:3.0mm * The values might be slightly different, depending on the application used. Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, Control Font and Control A Font. Printer Driver Specification A-125 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-T88IIIReceipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] A-126 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Rev.D Font name: control d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). Printer Driver Specification A-127 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180 DPI 90 x 90DPI Supported paper size 80 x 297mm 80 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Smoothing mode on Smoothing mode off _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Specification Remarks Driver name EPSON TM-T88III Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 80mm 210 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] A-128 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification TM-T88IV Specification Remark Driver name EPSON TM-T88IV Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 ~ 2D-Code8 Layout possible 2D-Code PDF417 QR Code Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Rev.D Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) Printer Driver Specification A-129 Advanced Printer Driver Printer Driver Specification Special function font Font name: control w Position alignment left Number of points: 1 x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Paper feeding +Partial cut [ NV bit images No. 1 printing.(Double Height Double Width mode). ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 180x180DPI A-130 Printer Driver Specification Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Rev.D Advanced Printer Driver Printer Driver Specification Paper Size Roll Paper 80 x 297mm (566dot × 2104dot) User Defined Paper Size width : 79.9 (566dot) height : 25.4 - 3276.0mm (180 - 23216dot) When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:3.7mm right:3.7mm 80mm * The values might be slightly different, depending on the application used. Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) Rev.D When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Printer Driver Specification A-131 Advanced Printer Driver Printer Driver Specification TM-T90 Specification Remark Driver name EPSON TM-T90Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA24 FontA84 FontB21 FontB44 FontA12 FontA42 FontA88 FontB22 FontB48 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] Barcode Tab FontA21 FontA44 FontB11 FontB24 FontB84 FontA22 FontA48 FontB12 FontB42 FontB88 FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] Barcode1 ~ Barcode8 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected Layout possible Barcode ITF JAN13(EAN) JAN8(EAN) UPC-A UPC-E Code39 Codabar Code93 Code128 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. 2D-Code Tab 2D-Code1 ~ 2D-Code8 Layout possible 2D-Code PDF417 Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut h NV graphics 0 printing (48,48) i NV graphics 1 printing (48,49) j NV graphics 2 printing (48,50) k NV graphics 3 printing (48,51) l NV graphics 4 printing (48,52) A-132 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control w Position alignment left Number of points: 1 x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Extended Special function font Font name: controlA Number of points: 1 resolution 180x180DPI Paper Size Roll Paper 80 x 297mm (566dot × 2104dot) User Defined Paper Size width : 58 - 80mm (411 - 566dot) hight : 25.4 - 1000mm (180 - 7086dot) Roll Paper 60 x 297mm (425dot × 2104dot) User Defined Paper Size width : 58 - 59.9mm (411 - 425dot) hight : 25.4 - 1000mm (180 - 7086dot) Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:3.0mm right:4.3mm 80mm left:3.0mm right:2.4mm 60mm left:3.0mm right:3.7mm 58mm * The values might be slightly different, depending on the application used. Roll Paper 58 x 297mm (411dot × 2104dot) User Defined Paper Size width : 58mm (411dot) hight : 25.4 - 1000mm (180 - 7086dot) Logic paper size (when resizing in a smaller size) A4 210 x 297 mm LT 8.5 x 11 in Postcard 100 x 148 mm Rev.D Printer Driver Specification A-133 Advanced Printer Driver Printer Driver Specification Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing ON/OFF Fit to Printable Width/Custom(10 100%) Water Mark Tab Path input for BMP File Top/Middle/Bottom * Left/Center/ Right , Tiled 0(no printing) - 100(paper printing width) Original(0: no adjustment) - Light(100: white) When Water Mark is specified to the printer, the printer cannot use Printer Font, Barcode, 2D-Code, Control Font and Control A Font. Specification Remarks Driver name EPSON TM-T90Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontA24 FontA44 FontA84 FontB11 FontB21 FontB24 FontB44 FontB84 FontA12 FontA22 FontA42 FontA48 FontA88 FontB12 FontB22 FontB42 FontB48 FontB88 FontA11[255] FontA21[255] FontA24[255] FontA44[255] FontA84[255] FontB11[255] FontB21[255] FontB24[255] FontB44[255] FontB84[255] FontA11[Ext.] FontA21[Ext.] FontA24[Ext.] FontA44[Ext.] FontA84[Ext.] FontB11[Ext.] FontB21[Ext.] FontB24[Ext.] FontB44[Ext.] FontB84[Ext.] A-134 Printer Driver Specification TM Page:16(WPC1252) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[255] FontA22[255] FontA42[255] FontA48[255] FontA88[255] FontB12[255] FontB22[255] FontB42[255] FontB48[255] FontB88[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) FontA12[Ext.] FontA22[Ext.] FontA42[Ext.] FontA48[Ext.] FontA88[Ext.] FontB12[Ext.] FontB22[Ext.] FontB42[Ext.] FontB48[Ext.] FontB88[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(12x24) FontA(12x48) FontA(24x24) FontA(24x48) FontA(24x96) FontA(48x48) FontA(48x96) FontA(48x192) FontA(96x96) FontA(96x192) FontB(9x17) FontB(9x34) FontB(18x17) FontB(18x34) FontB(18x68) FontB(36x34) FontB(36x68) FontB(36x136) FontB(72x68) FontB(72x136) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 Supported printer font name for Twodimensional code PDF417 The maximum number of columns that can be input depends on the paper width below: 80mm:512 60mm:384 58mm:360 Supported printer font name for Special function Font name: control Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. u Enables smoothing. v Disables smoothing. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) Rev.D JAN8(EAN) UPC-E Codabar Code128 Printer Driver Specification A-135 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 180 x 180 DPI Supported paper size 58 x 297mm 60 x 297mm 80 x 297mm 58 x 3276mm 60 x 3276mm 80 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality Smoothing mode on Smoothing mode off E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [ NV bit images No. 1 printing.(Double Height Double Width mode). ] NV bit images No. 2 printing.(Double Height Double Width mode). ^ NV bit images No. 3 printing.(Double Height Double Width mode). _ NV bit images No. 4 printing.(Double Height Double Width mode). ` NV bit images No. 5 printing.(Double Height Double Width mode). [No cut] [cut] [No Feed] [No cut] [cut] A-136 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-T90 Reduce35 Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 62 x 62DPI Supported paper size Target 58mm Target 60mm Target 80mm 210 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None Rev.D [No cut] [cut] [No Feed] [No cut] [cut] Printer Driver Specification A-137 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-T90 Reverse Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name Not Supported Supported printer font name for bar code Not Supported Supported printer font name for Special function Not Supported Supported printer font name for Extended special function Not Supported Supported resolution 180 x 180DPI Supported paper size 80 x 297mm 60 x 297mm 58 x 297mm XX x YY (T90 Reverse) Supported paper source Form Form Form Supported print Quality None [No cut] [cut] [No Feed] Notes on upside-down printing 1. The driver enables to rotating the printing result 180 degrees to perform upside-down printing on each page. The maximum length of the page is 297mm. 2. If XX x YY (TM-T90 Reverse) is selected for paper size, specify the number of dots for the printing area of the upside-down printing in the section of TMCTRL.INI below. Then the area for the upside-down printing can be set freely. (Default is the printing area for 80 mm width paper.) [TM-T90 Reverse] Width=576 3. When the paper size XX x YY (TM-T90 Reverse) is selected and if there is no definition described in 1., use the value of the printer that has been already defined (the paper size selected from the printer property sheet) as the printing area to process the upside-down printing. 4. Be sure that the paper size selected from the printer property sheet and the paper size selected by an application are the same. If they are different, horizontal and vertical lengths of printing paper might not be obtained correctly and the upside-down priting might not be done correctly. A-138 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification TM-U210A/B/D Specification Remark Driver name EPSON TM-U210 Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA12 FontA21 FontA22 FontB11 FontB12 FontB21 FontB22 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected FontA11[255] FontA21[255] FontB11[255] FontB21[255] Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected FontA12[255] FontA22[255] FontB12[255] FontB22[255] Barcode Tab Not supported 2D-Code Tab Not supported Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Rev.D Printer Driver Specification A-139 Advanced Printer Driver Printer Driver Specification Extended Special function font Font name: controlA Number of points: 1 resolution 80 x 72DPI Paper Size Roll Paper 76mm x 297mm (478dot × 841dot) User Defined Paper Size Width: 75.9mm (478dot) High: 25.4 - 999.9mm (72 - 28346dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not supported Water Mark Tab Not supported Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value 76mm left:6.8mm right:5.8mm left:6.7mm right:5.8mm 70mm left:4.2mm right:5.8mm 58mm * The values might be slightly different, depending on the application used. Specification Remarks Driver name EPSON TM-U210 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] Supported printer font name for bar Code TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) None A-140 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 80 x 72DPI Supported paper size 76 x 297mm 76 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None Rev.D Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) P Cut Receipt (partial cut) [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Printer Driver Specification A-141 Advanced Printer Driver Printer Driver Specification TM-U220A/B/D Specification Remark Driver name EPSON TM-U220 Receipt3 Version5.00 Driver type Ver.3.xx Printer font FontA11 FontA12 FontA21 FontA22 FontB11 FontB12 FontB21 FontB22 Code Page WPC1252 Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected FontA11[255] FontA21[255] FontB11[255] FontB21[255] Code Page Space Page (255) Prohibited when rotation is selected Prohibited when resizing a font in a smaller size or when Water Mark is selected FontA12[255] FontA22[255] FontB12[255] FontB22[255] Barcode Tab Not supported 2D-Code Tab Not supported Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) g No paper feeding + Partial cut w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) P Paper feeding +Partial cut No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. A-142 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Extended Special function font Font name: controlA Number of points: 1 resolution 80 x 72DPI Paper Size Roll Paper 76mm x 297mm (478dot × 841dot) User Defined Paper Size Width: 75.9mm (478dot) High: 25.4 - 999.9mm (72 - 28346dot) Roll Paper 70mm x 297mm (440dot × 841dot) User Defined Paper Size Width:69.9mm (440dot) High: 25.4 - 999.9mm (72 - 28346dot) Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value left:6.8mm right:5.8mm 76mm left:6.7mm right:5.8mm 70mm left:4.2mm right:5.8mm 58mm * The values might be slightly different, depending on the application used. Roll Paper 58mm x 297mm (265dot × 841dot) User Defined Paper Size Width:57.9mm (365dot) High: 25.4 - 999.9mm (72 - 28346dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not supported Water Mark Tab Not supported Rev.D Printer Driver Specification A-143 Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-U220 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported Printer font name FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] Supported printer font name for bar Code None Supported printer font name for Special function Font name: control A-144 Printer Driver Specification TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 80 x 72DPI Supported paper size 76 x 297mm 70(57.1) x 297mm 58(47.6) x 297mm 76 x 3276mm 70(57.1) x 3276mm 58(47.6) x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None Rev.D B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Printer Driver Specification A-145 Advanced Printer Driver Printer Driver Specification TM-U230 Specification Remarks Driver name EPSON TM-U230 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code None Supported printer font name for Special function Font name: control A-146 Printer Driver Specification TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 80 x 72DPI Supported paper size 76 x 297mm 76 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None Rev.D B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) P Cut Receipt (partial cut) [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] Printer Driver Specification A-147 Advanced Printer Driver Printer Driver Specification TM-U295 Specification Remarks Driver name EPSON TM-U295 Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] Supported printer font name for bar Code None Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 160 x 60DPI Supported paper size 66.8 x 203mm Supported paper source Slip Slip (BOF) Supported print Quality None A-148 Printer Driver Specification TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9 FontB(14x18) TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9 FontB(14x18) Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) BOF sensor disabled BOF sensor enabled Rev.D Advanced Printer Driver Printer Driver Specification TM-U375 Specification Remark Driver name EPSON TM-U375 Receipt Version5.01 Driver type Ver.3.xx Printer font FontA11 FontA21 FontB11 FontB21 TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12 FontA22 FontB12 FontB22 FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot)FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Barcode Tab Not supported 2D-Code Tab Not supported Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. Rev.D Printer Driver Specification A-149 Advanced Printer Driver Printer Driver Specification Extended Special function font Font name: controlA Number of points: 1 resolution 160 x 144DPI 80 x 72DPI Paper Size Roll Paper 76mm x 297mm (478dot × 1684dot) User Defined Paper Size Width: 75.9mm (478dot) High: 25.4 - 999.9mm (144 - 5668dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not supported Water Mark Tab Not supported Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Prohibited when resizing a font in a smaller size or when Water Mark is selected. When top and bottom margins are 0, a maximum printing area can be used. Default margin value 67mm left:6.8mm right:5.6mm * The values might be slightly different, depending on the application used. Specification Remark Driver name EPSON TM-U375 Slip Version5.01 Driver type Ver.3.xx TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Printer font FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Barcode Tab Not supported 2D-Code Tab Not Supported Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR A-150 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Special function font Font name: control a Open Drawer 5pin(50ms) Number of points: 1 b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Extended special function font Font name: controlA Number of points:1 resolution 160 x 144DPI 80 x72DPI Paper Size 182mm x 257mm (1146dot × 1457dot) User Defined Paper Size Width: 76.-181.97mm (483-1146dot) High: 160.0 - 257.0mm (907 - 1457dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not Supported Water Mark Tab Not Supported Rev.D Characters defined by ControlA Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that do not include paper feeding. Prohibited when rotation is selected. Default margin value 182mm left:112.9mm right:5.6mm top:5mm bottom:21mm 257mm * The values might be slightly different, depending on the application used. Printer Driver Specification A-151 Advanced Printer Driver Printer Driver Specification Specification Remark Driver name EPSON TM-U375 Validation Version5.01 Driver type Ver.3.xx TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Printer font FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 A11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Barcode Tab Not supported 2D-Code Tab Not Supported Special function font Font name: control Character Function Number of points: 1 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 5pin(50ms) b Open Drawer 5pin(100ms) c Open Drawer 5pin(150ms) d Open Drawer 5pin(200ms) e Open Drawer 5pin(250ms) w Position alignment left x Position alignment center y Position alignment right A Open Drawer 2pin(50ms) B Open Drawer 2pin(100ms) C Open Drawer 2pin(150ms) D Open Drawer 2pin(200ms) E Open Drawer 2pin(250ms) No operations for characters other than those mentioned above. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. A-152 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Extended special function font Font name: controlA Number of points:1 resolution 160 x 144DPI 80 x 72DPI Paper Size 182mm x 257mm (1146dot × 1457dot) User Defined Paper Size Width: 134.9-181.9mm (850-1146dot) High: 160.0 - 257.0mm (907 - 1457dot) Rotate Normal Rotate by 90 Degrees Rotate by 180 Degrees Rotate by 270 Degrees Reduce Printing Not Supported Water Mark Tab Not Supported Rev.D Characters defined by Control A Definition File can be selected. No operations for characters not defined. No printing for spaces. No paper feeding for any functions that are not done with paper feeding. Prohibited when rotation is selected. Default margin value 182mm left:112.9mm right:5.6mm top:5mm bottom:21mm 257mm * The values might be slightly different, depending on applications used. Printer Driver Specification A-153 Advanced Printer Driver Printer Driver Specification TM-U590 Specification Remarks Driver name EPSON TM-U590 Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code None Supported printer font name for Special function Font name: control A-154 Printer Driver Specification TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Extended special function Font name: controlA Supported resolution 150 x 72 DPI Supported paper size 135.6 x 257mm Supported paper source Slip Supported print Quality None Rev.D Printer Driver Specification A-155 Advanced Printer Driver Printer Driver Specification TM-U675 Specification Remarks Driver name EPSON TM-U675 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] A-156 Printer Driver Specification Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) g Cut Receipt (partial cut) without paper feeding. Rev.D Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 160 x 72DPI Rev.D p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). P Cut Receipt (partial cut) Printer Driver Specification A-157 Advanced Printer Driver Printer Driver Specification Supported paper size 76 x 297mm 82.5 x 297mm 76 x 3276mm 82.5 x 3276mm Supported paper source Report Report Report Form Form Supported print Quality None [No cut] [Partial cut] [No Feed] [No cut] [Partial cut] A-158 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-U675 Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] Rev.D Character Function 4 Transmits FF 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) Printer Driver Specification A-159 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 160 × 72DPI Supported paper size 85.7 x 274mm Supported paper source Slip Supported print Quality None A-160 Printer Driver Specification p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-U675 Validation Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 TM Page:16(WPC1252) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code ITF JAN13(EAN) UPC-A Code39 Code93 JAN8(EAN) UPC-E Codabar Code128 Supported printer font name for Special function Font name: control FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] Rev.D Character Function 5 Transmits HT 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) Printer Driver Specification A-161 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 160 × 72DPI Supported paper size 85.7 x 28.2mm Supported paper source Validation Supported print Quality None A-162 Printer Driver Specification p Does not add HRI characters to the bar code. q Adds HRI characters at the top of the bar code using Font A. r Adds HRI characters at the bottom of the bar code using Font A. s Adds HRI characters at the top of the bar code using Font B. t Adds HRI characters at the bottom of the bar code using Font B. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) G NV bit images No. 1 printing.(Normal mode). H NV bit images No. 2 printing.(Normal mode). I NV bit images No. 3 printing.(Normal mode). J NV bit images No. 4 printing.(Normal mode). K NV bit images No. 5 printing.(Normal mode). Rev.D Advanced Printer Driver Printer Driver Specification TM-U950 Specification Remarks Driver name EPSON TM-U950 Receipt Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code None Supported printer font name for Special function Font name: control Rev.D TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Character Function ! Print stamp. 1 Print to journal. 2 Print to receipt. 3 Print to receipt and journal. 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) f Cut Receipt (full cut) without paper feeding. Printer Driver Specification A-163 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 150 x 72DPI Supported paper size 70(60.9) x 297mm 70(60.9) x 3276mm Supported Paper/ output Receipt Journal Receipt/Journal Supported paper source Report Report Report Report Form Form Form Supported print Quality None g Cut Receipt (partial cut) without paper feeding. w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) [No cut] [Partial cut] [Full cut] [No Feed] [No cut] [Partial cut] [Full cut] A-164 Printer Driver Specification Rev.D Advanced Printer Driver Printer Driver Specification Specification Remarks Driver name EPSON TM-U950 Slip Version5.00 Driver type Ver.2.xx Compatible Supported Printer font name FontA11 FontA21 FontB11 FontB21 FontA12 FontA22 FontB12 FontB22 FontA11[254] FontA21[254] FontB11[254] FontB21[254] FontA11[255] FontA21[255] FontB11[255] FontB21[255] FontA11[Ext.] FontA21[Ext.] FontB11[Ext.] FontB21[Ext.] FontA12[254] FontA22[254] FontB12[254] FontB22[254] TM Page:254(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[255] FontA22[255] FontB12[255] FontB22[255] TM Page:255(Space page) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) FontA12[Ext.] FontA22[Ext.] FontB12[Ext.] FontB22[Ext.] TM Page:0(IBM Extended character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Supported printer font name for bar Code None Supported printer font name for Special function Font name: control Rev.D TM Page:2(ANSI character set) TM font name, Character size(dot) FontA(9x9) FontA(9x18) FontA(18x9) FontA(18x18) FontB(7x9) FontB(7x18) FontB(14x9) FontB(14x18) Character Function 6 Transmits LF 7 Transmits CR a Open Drawer 2 (50ms drive pulse width) b Open Drawer 2 (100ms drive pulse width) c Open Drawer 2 (150ms drive pulse width) d Open Drawer 2 (200ms drive pulse width) e Open Drawer 2 (250ms drive pulse width) w Alignes text to left. x Alignes text to center. y Alignes text to right. A Open Drawer 1 (50ms drive pulse width) B Open Drawer 1 (100ms drive pulse width) Printer Driver Specification A-165 Advanced Printer Driver Printer Driver Specification Supported printer font name for Special function Font name: control Supported printer font name for Extended special function Font name: controlA Supported resolution 150 x 72DPI Supported paper size 135.5 x 257mm Supported paper source Slip Supported print Quality None A-166 Printer Driver Specification C Open Drawer 1 (150ms drive pulse width) D Open Drawer 1 (200ms drive pulse width) E Open Drawer 1 (250ms drive pulse width) Rev.D Advanced Printer Driver Printer Driver Specification Rev.D Printer Driver Specification A-167 Advanced Printer Driver Printer Driver Specification A-168 Printer Driver Specification Rev.D EPSON SEIKO EPSON CORPORATION