Underfloor Heating Prices 2014 - Claygate Distribution Limited

Transcription

P&HDLTPL2
JUNE 2014
EFFECTIVE: 2ND JUNE 2014
Polypipe Plumbing & Heating
Trade Price List 2014
Contents
4
Plumbing & Heating
Trade Price List 2014
Plumbing & Heating Applications
Plumbing & Heating Pipes
8
9
10
12
Grey Pipe
White Pipe
Underfloor Heating
Pipe in Pipe and Conduit Pipe
Plumbing & Heating Fittings
16
28
32
40
44
PolyPlumb
PolyMax
PolyFit
PolyFit Hoses
PolySure
Underfloor Heating Systems
52
54
58
60
66
Underfloor Heating Pipe
Solid
Floating
Suspended
Existing Floors & Low Profile Systems
Manifolds & Water
Temperature Controls
72
76
Manifolds for Underfloor
and Central Heating Systems
Water Temperature Controls
Welcome to the new Polypipe Plumbing and Heating
Systems Trade Price List. This handy pocket guide
combines all of our plumbing and heating related
products into one single catalogue of product and price
information. Alongside all of our best known product
ranges, you will also find several exciting new additions,
continuing our reputation for product innovation and
great value. Together they make Polypipe the most
comprehensive range of plumbing and heating systems
available from a single UK manufacturer.
Be sure to check out these great new products:
Page 30
Sealed
Stiffeners
Sealed stiffeners for use with PolyFit
and PolyMax plumbing systems
Page 45
Plastic
PolySure
PolySure is now available
as a plastic bodied solution
For the latest product and support information, literature
downloads, product selectors and news visit us online
at www.polypipe.com/plumbing-heating
Room Temperature Controls
78
Renewable Pipe Systems
84
Application Information
88
2
www.polypipe.com
www.polypipe.com
3
Plumbing &
Heating Applications
PIPE SYSTEMS
(For Plumbing, Heating
and Underfloor Heating)
FITTING SYSTEMS
(For Plumbing and Heating)
UNDERFLOOR
HEATING SYSTEMS
MANIFOLDS & WATER
TEMPERATURE CONTROL
(Underfloor and Central
Heating System)
ROOM TEMPERATURE
CONTROLS
(Underfloor and Central
Heating System)
Plumbing
Heating
Underfloor Heating System
4
www.polypipe.com
www.polypipe.com
5
At the heart of the Polypipe Plumbing and Heating
Systems product offer is our commitment to
polybutylene pipe.
We choose polybutylene to create the most flexible and
efficient pipes and jointing systems available. Polybutylene
pipe is ideal for both domestic hot and cold water plumbing
and heating systems, offering exceptional durability and
long-term performance, which has seen it become the
preferred material choice for today’s building projects.
The most important characteristic of polybutylene is its
natural flexibility, allowing you to bend the pipe into even
the tightest of spaces. Polybutylene is the most malleable
plastic used in the manufacture of piping systems.
Another key advantage of polybutylene pipe is that it
is extremely lightweight, particularly when compared
with copper piping systems. For example, 15mm copper
tube will weigh approximately 0.28kg/m, compared to
just 0.074kg/m for polybutylene. This significant weight
reduction is invaluable when transporting materials to site.
Polybutylene pipe has good resistance to freezing
temperatures, maintaining long-term durability in heating
and water applications. This, combined with the pipe’s
elasticity, means that if water is subjected to freezing
temperatures, a burst pipe is less likely.
Our plumbing systems also give improved performance
over rigid pipe systems in terms of low noise transmission
and low water hammer effect.
Underfloor heating pipe systems
We have supplemented our pipe offers with two ranges
of underfloor specific pipe. Our ultra flexible underfloor
heating pipe aids installation and handleability whilst
our formable MCP pipes provide alternative for installers
familiar with this pipe characteristic.
6
www.polypipe.com
www.polypipe.com
7
Plumbing &
Heating Pipes
Barrier Polybutylene Pipe
Cut Length (Grey)
Pack Code
Qty. No.
Price
Each £
Polypipe White Plumbing, Heating
and Underfloor Heating Pipe - BS 7291 Class S
Cut Length (White)
Pack Code
Qty. No.
Price
Each £
15mm x 3 metre Barrier
10
PB315B
6.76
10
FIT215B
4.59
10
PB615B
13.25
10
PB322B
12.82
10
PB622B
24.71
10
10
10
FIT315B
FIT615B
FIT222B
6.76
13.25
8.82
10
10
PB328B
PB628B
18.95
37.68
10
FIT322B
12.82
10
FIT622B
24.71
10
10
FIT328B
FIT628B
18.95
37.68
Coil (White)
Pack Code
Qty. No.
Coil (Grey)
Pack Code
Qty. No.
Price
Each £
1
PB5010B
93.32
1
PB10010B
179.68
1
PB2515B
53.58
1
FIT2510B
1
PB5015B
107.16
1
FIT5010B
93.32
1
FIT10010B
179.68
Price
Each £
44.91
1
PB8015B
167.44
1
PB10015B
213.05
1
FIT2515B
53.58
1
PB12015B
247.94
1
FIT5015B
107.16
1
PB15015B
319.28
1
FIT10015B
213.05
1
PB2522B
104.52
1
FIT12015B
255.65
1
PB5022B
202.98
1
FIT15015B
319.28
116.66
230.76
1
FIT2522B
104.52
1
FIT5022B
202.98
1
1
FIT2528B
FIT5028B
116.66
230.76
1
1
PB2528B
PB5028B
Standard Polybutylene Pipe
Cut Length (Grey)
Pack Code
Qty. No.
15mm x 3 metre Standard
10
PB315
5.86
10
PB615
11.80
10
PB322
11.09
10
PB622
22.28
10
10
PB328
PB628
15.27
30.45
Standard Polybutylene Pipe
Coil (Grey)
Pack Code
Qty. No.
Price
Each £
1
PB5010
81.49
1
PB10010
165.37
1
PB2515
48.47
1
PB5015
96.30
1
PB10015
192.44
1
1
PB2522
PB5022
91.71
182.41
8
www.polypipe.com
Price
Each £
www.polypipe.com
9
Polypipe Grey Plumbing, Heating
Price
Each £
Polypipe MCP Underfloor Heating Pipe
(For Underfloor Heating Use Only) - EN21003
Coil (Grey)
Pack Code
Qty. No.
10mm X 25 metre Barrier
1
PB2510B
47.59
16mm x 80m Coil MCP UFH Pipe 1
MCP8016B
168.56
1
PB5015B
107.16
MCP10016B
210.70
1
PB8015B
167.44
MCP12016B
252.84
1
PB10015B
213.05
MCP15016B
316.05
1
PB12015B
247.94
1
PB15015B
319.28
15mm X 500 metre Barrier
1
PB50015B
983.26
Metal Composite Pipe
Pack Code
Qty. No.
Price
Each £
Polypipe Ultra Flexible Underfloor
Heating Pipe (For Underfloor Heating
Use Only) - EN15876
Polybutylene
Pack Code
Qty. No.
12mm x 25m Coil UFH Pipe
1
UFH2512B
38.16
1
UFH5012B
76.33
1
UFH8012B
122.12
1
UFH5015B
87.08
1
UFH8015B
139.32
1
UFH10015B
174.15
1
UFH12015B
208.98
1
UFH15015B
261.23
1
UFH50015B
870.75
1
UFH12018B
270.90
1
UFH20018B
451.50
1
UFH30018B
677.25
10
www.polypipe.com
Price
Each £
www.polypipe.com
11
Pipe in Pipe and Conduit Pipe
Barrier Pipe-in-Pipe
Coil (Grey)
Pack Code
Qty. No.
Price
Each £
10mm x 50 metre Pipe in Pipe
1
PIP5010B
165.87
1
PIP2515B
90.54
1
1
PIP5015B
PIP2522B
181.29
155.05
Conduit Polypropylene Pipe
Coil
Pack Code
Qty. No.
Price
Each £
29.35
15mm x 25 metre (Black)
1
CPC1525
1
CPC1550
59.03
1
1
CPC2225
CPC2250
36.67
73.76
12
www.polypipe.com
www.polypipe.com
13
Polypipe recognises that no two jobs are the same
and has developed an application-based range of
plumbing solutions with four fittings ranges, backed
by a range of pipe options.
Plumbing fitting ranges:
Traditional push fit plumbing
Original robust, grey system, suitable for a range of applications
Streamline push fit plumbing
Slim and sleek, ideal for surface mounted applications
Quickfix push fit plumbing
Hand demountable, ideal for first fix applications
Permanent press fit plumbing
Slim profile fittings, ideal when security is paramount
Each range is available in a wide selection of fitting types plus
valves, connectors, brassware and accessories. Combine with
the appropriate selection from our comprehensive range of
piping systems.
Find out more about Polypipe plumbing
Plumbing fitting solutions:
Size (mm)
Grey
Jointing
Method
White Pushfit Pressfit
Fitting Solutions
10 15 22 28
Pipe Colour
14
www.polypipe.com
www.polypipe.com
15
Plumbing &
Heating Fittings
PolyPlumb
Pack Code
Qty. No.
Price
Each £
10mm
10
PB010
15mm
10
PB015
2.16
22mm
28mm
10
5
PB022
PB028
2.87
8.26
Socket Reducer
Pack Code
Qty. No.
15mm x 10mm
3.49
Price
Each £
10
PB1815
3.33
22mm x 15mm (not suitable for
10
use with compression fittings)
PB1822
2.60
5
PB1828
5.92
Spigot Reducer
Pack Code
Qty. No.
15mm x 10mm
5
PB815
1.81
22mm x 15mm
(22mm end not suitable for
5
PB822
2.00
28mm x 22mm
(not suitable for use with
compression fittings)
5
PB828
3.77
Reducing Coupling
Pack Code
Qty. No.
22mm x 10mm
5
Elbow
Pack Code
Qty. No.
10mm
10
PB110
3.86
15mm
10
PB115
2.53
22mm
28mm
10
5
PB122
PB128
3.72
8.82
PolyPlumb fittings feature a one step jointing process and a
high performance stainless steel grab ring within the fitting,
ensuring superb joint integrity. Use PolyPlumb with Polypipe
grey polybutylene flexible pipe, or you can combine
PolyPlumb fittings and copper pipe. We recommend the
use of a Polypipe metal or plastic pipe stiffener when used
with plastic pipe.
Spigot Elbow
Pack Code
Qty. No.
Price
Each £
10mm
10
PB1010
4.02
10mm x 15mm
10
PB101510
3.68
15mm
10
PB1015
2.81
22mm (not suitable for use
with compression fittings)
10
PB1022
4.17
PolyPlumb is suitable for use in most plumbing and heating
installations including hot and cold water and underfloor
heating applications.
Equal Tee
Pack Code
Qty. No.
10mm
10
PB210
4.84
15mm
10
PB215
3.64
22mm
28mm
10
5
PB222
PB228
4.76
14.02
Traditional push fit plumbing
PolyPlumb is our original, tried and tested, grey plumbing
system. Robust and reliable, PolyPlumb has stood the test
of time.
16
www.polypipe.com
PolyPlumb
Straight Coupler
Price
Each £
Price
Each £
PB582210
5.27
Price
Each £
Price
Each £
www.polypipe.com
17
PolyPlumb
PolyPlumb
Pack Code
Qty. No.
15mm x 10mm x 15mm
5
PB1415
22mm x 15mm x 22mm
28mm x 22mm x 28mm
5
5
PB1422
PB1428
Branch Reduced Tee
Pack Code
Qty. No.
15mm x 15mm x 10mm
5
PB1115
22mm x 22mm x 10mm
5
PB112210
22mm x 22mm x 15mm
28mm x 28mm x 22mm
5
5
PB1122
PB1128
Two Ends Reduced Tee
Pack Code
Qty. No.
15mm x 15mm x 22mm
5
PB1622
Demountable Socket
Blank Ends
Pack Code
Qty. No.
4.83
10mm
10
PB6910
2.13
4.89
14.02
15mm
10
PB6915
1.71
22mm
28mm
10
5
PB6922
PB6928
2.45
4.12
4.97
Straight Tap Connector
(Brass Connecting Nut)
Pack Code
Qty. No.
4.98
15mm x 1/2” (1)
10
PB715
3.69
4.86
12.46
15mm x 3/4” (2)
22mm x 3/4” (2)
5
5
PB71534
PB722
5.35
5.83
Price
Each £
Price
Each £
Price
Each £
4.83
Branch and One
End Reduced Tee
Pack Code
Qty. No.
15mm x 10mm x 10mm
5
PB1515
4.62
22mm x 15mm x 15mm
28mm x 22mm x 22mm
5
5
PB1522
PB1528
4.74
12.46
Branch Reduced Spigot Tee
Pack Code
Qty. No.
15mm x 15mm x 10mm
5
PB1215
4.83
22mm x 22mm x 15mm
(not suitable for use with
compression fittings)
5
PB1222
4.95
Spigot Blank Ends
Pack Code
Qty. No.
10mm
10
PB910
1.10
15mm
10
PB915
0.86
10
PB922
1.13
5
PB928
2.04
Socket Blank Ends
Pack Code
Qty. No.
Price
Each £
10mm
10
PB1910
Price
Each £
Price
Each £
Price
Each £
2.13
15mm
10
PB1915
1.70
22mm
28mm
10
5
PB1922
PB1928
2.45
4.12
18
www.polypipe.com
Price
Each £
End Reduced Tee
Price
Each £
(1) C
omplete with E.P.D.M. Sealing Washer. Spare flat seal included
(tighten by hand plus a further 1/4 of a turn with a spanner)
(2) Complete with fibre sealing washer
Hand Tighten Tap Connector Pack Code
Qty. No.
Price
Each £
(Not suitable for central heating)
15mm x 1/2”
10
PB2715
2.96
15mm x 3/4”
22mm x 3/4”
5
5
PB271534
PB2722
3.53
3.96
Complete with E.P.D.M. Sealing Washer
Bent Tap Connector
Pack Code
Qty. No.
15mm x 1/2”
10
Price
Each £
6.21
PB1715
Complete with E.P.D.M. Sealing Washer. Spare flat seal included
Flexible Hose Tap Connector Pack Code
Qty. No.
Price
Each £
11.42
10mm x 1/2”
2
PB681012
15mm x 1/2”
2
PB6815
8.02
15mm x 3/4”
22mm x 3/4”
2
2
PB681534
PB6822
9.42
8.65
Tank Connector
(Cold water only)
Pack Code
Qty. No.
15mm x 1/2”
10
PB3815
2.84
22mm x 3/4”
28mm x 1”
10
5
PB3822
PB3828
3.73
8.95
Price
Each £
Complete with E.P.D.M. Sealing Washer (tighten by hand)
Wall Plate Elbow
(Cold water only) (Use PTFE tape to seal threads)
Pack Code
Qty. No.
Price
Each £
15mm x 1/2”
5
PB5315
5.81
22mm x 1/2”
22mm x 3/4”
5
5
PB532212
PB5322
6.39
7.21
www.polypipe.com
19
PolyPlumb
(Use PTFE tape to seal threads)
Pack Code
Qty. No.
Price
Each £
Brass Single Sided Manifold
Unvalved (Brass)
Pack Code
Qty. No.
Price
Each £
15mm x 1/2”
5
PB1315
17.50
22mm x 1/2”
28mm x 1/2”
5
5
PB132212
PB132812
19.37
36.30
15mm x 3/4” Female/Male
BSP 2 Port
1
PB47152
21.77
Wall Plate Tee (Brass)
BSP 3 Port
1
PB47153
34.97
Pack Code
Qty. No.
15mm x 1/2”
5
PB5115
Price
Each £
19.37
Brass Single Sided Manifold
Valved (Brass)
BSP 2 Port
1
PB5234152
45.46
Price
Each £
BSP 3 Port
1
PB5234153
69.68
Manifold Bracket (Metal)
Pack Code
Qty. No.
3/4”
2
Stopcock (Grey)
(Cold water only)
Pack Code
Qty. No.
15mm x 15mm
5
PB2615
9.40
22mm x 22mm
5
PB2622
11.24
MDPE Stopcock (Grey)
(Polyfast) (Cold water only)
Pack Code
Qty. No.
20mm MDPE x 15mm
5
PB262015
17.26
25mm MDPE x 15mm
25mm MDPE x 22mm
5
5
PB262515
PB262522
14.21
18.10
Gate Valve (Brass)
Pack Code
Qty. No.
15mm
5
PB3115
16.42
22mm
5
PB3122
23.08
Shut-Off Valve (White)
Pack Code
Qty. No.
5
Female Elbow (Brass)
Pack Code
Qty. No.
15mm x 1/2”
5
PB3015
22mm x 1/2”
22mm x 3/4”
5
5
PB302212
PB3022
Female Tee (Brass)
Pack Code
Qty. No.
15mm x 1/2”
5
PB2915
13.52
22mm x 1/2”
5
PB292212
15.36
Conduit Terminal Box
Pack Code
Qty. No.
Polybutylene Double Sided
Manifold (Grey)
(Use Ball Valve to convert to Valved Manifold)
2
PB4515
Pack Code
Qty. No.
9.29
10.03
10.03
Price
Each £
Price
Each £
10.38
Price
Each £
22mm x 10mm - 2 Port
(Socket/Socket)
5
PB2822
11.31
(Socket/Socket)
5
PB4822
13.34
(Socket/Spigot)
5
PB4922
13.34
Polybutylene Single Sided
Manifold (Grey)
(Use Ball Valve to convert to Valved Manifold)
(Socket/Socket)
Pack Code
Qty. No.
1
PB7322153
Price
Each £
8.94
(Socket/Spigot)
1
PB7622153
9.15
(Socket/Socket)
1
PB7322104
13.19
(Socket/Spigot)
1
PB7622104
13.19
20
www.polypipe.com
Price
Each £
21.13
22mm x 1/2”
Includes 15mm x 1/2”
Wall Plate Elbow
PB512212
Pack Code
Qty. No.
Wall Plate Elbow (Brass)
PolyPlumb
15mm x 15mm Warm/Cold
(Please note these valves now
contain a plain white index)
Appliance Valve (White)
15mm x 3/4” Warm/Cold
5
9.90
PB4634
PB5915
Pack Code
Qty. No.
5
Price
Each £
PB6115
Price
Each £
Price
Each £
Price
Each £
Price
Each £
6.20
Price
Each £
6.19
www.polypipe.com
21
PolyPlumb
PolyPlumb
Price
Each £
Radiator Connector
(Bend “RCB”)
(Pipe stiffeners must be used on each end)
15mm x 1/2”
5
Bent Service Valve (White)
Pack Code
Qty. No.
15mm x 1/2” 90°
5
Bent Service Valve (White)
Pack Code
Qty. No.
15mm x 15mm 90°
Double Check Valve
5
PB6515
PB6615
PB7915
9.09
Pack Code
Qty. No.
Price
Each £
2.00
2.19
10mm
15mm
10
10
Bend Former
(Bend radius is 8 x Pipe diameter)
Pack Code
Qty. No.
9.87
15mm
5
PB6315
9.79
Price
Each £
22mm
5
PB6322
13.67
Radiator Terminal Plate
Pack Code
Qty. No.
10
Price
Each £
9.87
Price Per
Pack £
Price
Each £
RTP10
9.08
Pack Code
Qty. No.
Price
Each £
Pack Code
Qty. No.
15mm
1
PB3715
22.08
Male BSP Adaptor
(DZR Brass Body)
22mm
28mm
1
1
PB3722
PB3728
30.09
36.08
10mm x 1/4”
10
PB4310
10mm x 3/8”
10
PB431038
9.17
15mm x 1/2”
10
PB4315
9.71
22mm x 3/4”
28mm x 1”
10
5
PB4322
PB4328
14.20
18.82
Quarter Turn Ball Valve
Price
Each £
PB3910
PB3915
(Nickel Plated Brass)
Pack Code
Qty. No.
15mm
5
PB6715
23.88
22mm
2
PB6722
31.22
Female BSP Adaptor
(DZR Brass Body)
28mm
2
PB6728
38.69
(Parallel BSP threads to BS21 only use PTFE
tape to seal threads)
Ball Valve (Brass)
Pack Code
Qty. No.
(use to convert Unvalved to Valved version)
15mm x 15mm (Socket/Spigot) 5
Thermostatic Radiator Valve
(Plated Brass)
(All include MDPE 12 Bar Plastic
Pipe Stiffener)
10mm
15mm
Pipe Stiffener)
10mm
15mm
22
Pack Code
Qty. No.
1
1
Radiator/Lockshield Valve
(Plated Brass)
PB4015
PB3310
PB3315
Pack Code
Qty. No.
1
1
www.polypipe.com
PB3210
PB3215
Price
Each £
(Taper BSP threads to BS21 only use PTFE
Price
Each £
20.76
Price
Each £
42.03
42.03
Price
Each £
10.46
10.46
9.17
Pack Code
Qty. No.
Price
Each £
10mm x 1/4”
10
PB4410
10.33
10mm x 3/8”
10
PB441038
10.33
15mm x 1/2”
10
PB4415
15mm x 3/4”
10
PB441534
10.99
22mm x 3/4”
28mm x 1”
10
5
PB4422
PB4428
14.36
15.74
MDPE Polyfast Adaptor
(Cold Water Only)
Pipe Stiffener)
9.62
Pack Code
Qty. No.
Price
Each £
15mm x 20mm
5
PB422015
4.42
15mm x 25mm
5
PB422515
5.45
22mm x 25mm
5
PB422522
5.65
22mm x 32mm
28mm x 32mm
5
5
PB423222
PB423228
10.79
11.31
Spigot Draincock
(Brass)
Pack Code
Qty. No.
15mm
10
PB3615
Straight Service Valve (White) Pack Code
Qty. No.
Price
Each £
9.18
www.polypipe.com
23
PolyPlumb
(Must be used with Polybutylene Pipe)
Pack Code
Qty. No.
Price Per
Pack £
10mm
20
PB6410
7.46
15mm
50
PB6415
18.16
1/2”
3/4”
22mm
28mm
50
20
PB6422
PB6428
22.61
13.45
Flat E.P.D.M. Sealing Washer Pack Code
(For Hand Tightened Tap Connector)
Qty. No.
Pipe Stiffener
(Stainless Steel)
Pack Code
Qty. No.
Price Per
Pack £
4.19
4.19
‘O’ Rings E.P.D.M. Rubber
(Must be lubricated)
Pack Code
Qty. No.
3/4”
20
Valve Tidy Cover Polypropylene
Pack Code
Qty. No.
For 10mm/8mm pipe
6
Junction Inspection Box Polypropylene
Pack Code
Qty. No.
Junction Box
(75mm deep - grey)
1
JIB1
5.81
Junction Box Lid (12mm plywood) 1
JIB2
1.88
Junction Box
(65mm deep - black)
1
JIB3
5.67
Silicone Lubricant, Solvent
Cement and Cleaning Fluid
Pack Code
Qty. No.
Silicone Lubricant 100gm
Screw Top Jar
10
SG100
13.17
Solvent Cement c/w Brush
125ml (BS6209)
10
SC125
10.16
Price Per
Pack £
250ml (BS6209)
10
SC250
15.48
500ml (BS6209)
10
SC500
28.06
Cleaning Fluid 250ml Tin
10
CF250
11.07
Boiler Overflow Pipe Guard
Pack Code
Qty. No.
Boiler Overflow Pipe Guard
(c/w x 2 Pipe Clips)
1
Self Adhesive
Aluminium Tape
Pack Code
Qty. No.
20
PB6410M
8.83
50
50
PB6415M
PB6422M
21.51
26.80
PolyPlumb Bulldog Clips
Polypropylene
Pack Code
Qty. No.
15mm
22mm
28mm
50
50
50
Nail-In Clips - Polypropylene
Pack Code
Qty. No.
10mm
50
PB2210
7.85
15mm
50
PB2215
13.05
22mm
28mm
50
50
PB2222
PB2228
13.05
15.89
Snap-Fit Clips Polypropylene
Pack Code
Qty. No.
10mm
50
PB2310
8.86
15mm
50
PB2315
13.48
22mm
28mm
50
50
PB2322
PB2328
13.48
18.29
Price Per
Pack £
6.30
9.47
13.01
Price Per
Pack £
Price Per
Pack £
Pipe Clip Spacer Polypropylene
Pack Code
Qty. No.
10mm
20
PB2410
4.86
15mm
20
PB2415
4.48
22mm
28mm
20
20
PB2422
PB2428
6.00
7.94
Spares Component Kit
Pack Code
Qty. No.
10mm
10
PB9510
2.26
15mm
10
PB9515
1.45
22mm
28mm
10
5
PB9522
PB9528
1.95
5.34
www.polypipe.com
4.19
4.19
PB9312
PB9334
20
20
10mm
24
20
20
Price Per
Pack £
1/2”
3/4”
Price Per
Pack £
15mm
22mm
PB2115
PB2122
PB2128
Conical E.P.D.M. Sealing
Pack Code
Washer (For Tap Connector with Brass Nut) Qty. No.
Price
Each £
48mm wide x 46 metres long
24
(Do not stick to PolyPlumb pipes)
PB9412
PB9434
Price Per
Pack £
8.09
PB9034
Price
Each £
6.15
VT149
Price
Each £
Price
Each £
Price
Each £
BOPG50
ALTP
Pipe Stiffener (Plastic)
PolyPlumb
6.39
Price
Each £
14.71
www.polypipe.com
25
PolyPlumb
System Test Kit
Pack Code
Qty. No.
Price
Each £
System Test Kit
1
PB993
523.53
Underfloor Pipe Duct (PVCu)
Pack Code
Qty. No.
Price
Each £
50mm depth x 150mm width
x 3 metre for 10, 15 & 22mm
pipe (requires 12mm thickness
cover board)
5
FD50
18.26
70mm depth x 150mm width
x 3 metre for 28mm pipe, duct
5
only - fittings fabricated on site
(requires 12mm cover board)
FD70
22.75
Push-Fit Union (PVCu)
Pack Code
Qty. No.
Price
Each £
Double Socket for 50mm only
10
FD52
2.19
Push-Fit 90° Angle (PVCu)
Pack Code
Qty. No.
Price
Each £
Double Socket for 50mm only
10
FD53
4.00
Push-Fit 90° Tee (PVCu)
Pack Code
Qty. No.
Price
Each £
Triple Socket for 50mm only
10
FD54
4.46
Push-Fit End Cap (PVCu)
Pack Code
Qty. No.
Price
Each £
Single Socket for 50mm only
(insert Solvent Weld Pipe Clips
and Base)
10
FD55
1.33
(For use with PVCu Pipe Duct)
Pack Code
Qty. No.
Price Per
Pack £
15mm (ABS)
100
FDB15
5.61
22mm (ABS)
100
FDB22
8.04
28mm (ABS)
Pipe Clip Base Plate (PVC)
100
100
FDB28
FDB93
10.49
0.40
Pipe Cutters Standard
Pack Code
Qty. No.
V Bladed Standard Cutter
10mm to 22mm
1
PB781
19.14
Pipe Cutters Ratchet
Pack Code
Qty. No.
Price
Each £
Ratchet Type Cutters
1
PB778
29.03
Replacement Blade
for Ratchet Cutter
1
PB779
15.38
Solvent Weld Pipe Clips
26
www.polypipe.com
PolyPlumb
Price
Each £
www.polypipe.com
27
PolyMax
Streamline push fit plumbing
PolyMax is our newest plumbing fitting range,
introduced after extensive research, to meet consumer
and installer demand.
Available in 15mm and 22mm sizes, PolyMax fittings are
slim, sleek and attractive, making PolyMax the perfect
choice for surface mounted installations. PolyMax is easily
demounted using our handy release tool. Use PolyMax with
Polypipe white polybutylene flexible pipe, using a Polypipe
metal or plastic pipe stiffener. For extra security, choose
the new Polypipe sealed stiffener.
PolyMax can be used on a wide range of home
improvement and refit projects, including hot and
cold water systems.
Pack Code
Qty. No.
15mm
22mm
10
10
Socket Reducer
Pack Code
Qty. No.
15mm x 10mm
10
MAX1815
2.96
10
MAX1822
2.28
www.polypipe.com
1.81
2.55
MAX015
MAX022
Price
Each £
Elbow
Pack Code
Qty. No.
15mm
22mm
10
10
Spigot Elbow
Pack Code
Qty. No.
10mm
15mm
10
10
Equal Tee
Pack Code
Qty. No.
15mm
10
MAX215
3.11
22mm
10
MAX222
4.22
End Reduced Tee
Pack Code
Qty. No.
22mm x 15mm x 22mm
5
Branch Reduced Tee
Pack Code
Qty. No.
22mm x 22mm x 10mm
22mm x 22mm x 15mm
5
5
Branch and One End
Reduced Tee
Pack Code
Qty. No.
22mm x 15mm x 15mm
5
Pack Code
Qty. No.
Price
Each £
15mm x 3/4” (1)
5
2.20
3.24
MAX115
MAX122
Price
Each £
3.24
2.20
MAX1010
MAX1015
Price
Each £
Price
Each £
4.22
MAX1422
Price
Each £
4.22
4.22
MAX112210
MAX1122
Price
Each £
4.22
MAX1522
Price
Each £
3.50
MAX71534
Qty. No.
15mm x 1/2”
22mm x 3/4”
28
Price
Each £
PolyMax
Straight Coupler
10
5
Price
Each £
MAX2715
MAX2722
2.52
3.26
www.polypipe.com
29
PolyMax
(Not suitable for use with compression fittings)
Pack Code
Qty. No.
10mm
10
FIT910
0.99
15mm
10
22mm (with reinforcing sleeve) 10
FIT915
FIT922
0.91
1.12
Radiator Connector
(Bend “RCB”)
Pack Code
Qty. No.
PB3910
PB3915
Price
Each £
Price
Each £
2.00
2.19
10mm
15mm
10
10
Bend Former
(Bend radius is 8 x pipe diameter)
Pack Code
Qty. No.
15mm
5
PB6315
9.79
22mm
5
PB6322
13.67
Pipe Stiffener - Plastic
(Must be used with polybutylene pipe)
Pack Code
Qty. No.
10mm
20
PB6410
7.46
15mm
50
PB6415
18.16
22mm
28mm
50
20
PB6422
PB6428
22.61
13.45
Pipe Stiffener
(Stainless Steel)
Pack Code
Qty. No.
Price Per
Pack £
Price Per
Pack £
Price Per
Pack £
10mm
20
PB6410M
8.83
15mm
22mm
50
50
PB6415M
PB6422M
21.51
26.80
Sealed Stiffener - Plastic
(Not for use with PolyPlumb)
Pack Code
Qty. No.
15mm
22mm
50
50
Fitting Release Aid
Pack Code
Qty. No.
Set of 4 for 10mm, 15mm,
22mm and 28mm fittings,
Per
a useful tool to assist in
Set
demounting PolyMax and
PolyFit fittings, but not essential
PB6415S
PB6422S
FITAID
Price Per
Pack £
30.33
37.75
Price Per
Pack £
2.19
Pack Code
Qty. No.
10mm
50
FIT2210
11.80
15mm
50
FIT2215
16.01
22mm
28mm
50
50
FIT2222
FIT2228
20.22
23.59
30
www.polypipe.com
Spigot Blank Ends
PolyMax
Price Per
Pack £
www.polypipe.com
31
PolyFit
Pack Code
Qty. No.
Price
Each £
10mm
10
FIT010
15mm
10
FIT015
1.81
22mm
28mm
10
5
FIT022
FIT028
2.85
7.37
Socket Reducer
Pack Code
Qty. No.
15mm x 10mm
2.45
Price
Each £
10
FIT1815
2.10
10
FIT1822
2.72
10
FIT182815
5.73
5
FIT1828
6.13
Reducing Coupler
Pack Code
Qty. No.
Price
Each £
15mm x 10mm
5
FIT5815
4.36
22mm x 10mm
22mm x 15mm
5
5
FIT582210
FIT5822
5.39
5.14
Elbow
Pack Code
Qty. No.
10mm
10
FIT110
15mm
10
FIT115
2.15
22mm
28mm
10
5
FIT122
FIT128
3.41
8.42
Spigot Elbow
Pack Code
Qty. No.
PolyFit is our hand demountable white, push fit plumbing
system, offering maximum flexibility and adjustability.
10mm
10
FIT1010
3.73
10mm x 15mm
10
FIT101510
3.98
PolyFit features a one step jointing operation for quick and
easy installation. PolyFit leads the market in speed to fit.
If you need to adjust a fitting joint during the installation
process, PolyFit fittings can be quickly demounted by hand,
or by using our release tool.
15mm
10
FIT1015
4.20
10
FIT1022
6.40
Equal Tee
Pack Code
Qty. No.
10mm
10
FIT210
15mm
10
FIT215
3.12
22mm
28mm
10
5
FIT222
FIT228
4.61
11.86
Quickfix push fit plumbing
Use PolyFit with Polypipe white polybutylene flexible pipe,
using a Polypipe metal or plastic pipe stiffener. For extra
security, choose the new Polypipe sealed stiffener.
PolyFit can be used on a wide range of contract and retrofit
projects, including hot and cold water systems,
and is particularly suitable for first fix installations.
32
www.polypipe.com
PolyFit
Straight Coupler
Price
Each £
3.02
Price
Each £
Price
Each £
3.54
www.polypipe.com
33
PolyFit
PolyFit
Price
Each £
Pack Code
Qty. No.
15mm x 10mm x 15mm
5
FIT1415
4.93
10mm x 1/2”
10
FIT271012
22mm x 15mm x 22mm
28mm x 22mm x 28mm
5
5
FIT1422
FIT1428
5.20
13.41
15mm x 1/2”
10
FIT2715
2.03
5
5
FIT271534
FIT2722
4.45
3.05
Branch Reduced Tee
Pack Code
Qty. No.
15mm x 3/4”
22mm x 3/4”
15mm x 15mm x 10mm
5
FIT1115
4.73
Bent Tap Connector
Pack Code
Qty. No.
22mm x 22mm x 10mm
5
FIT112210
5.20
22mm x 22mm x 15mm
28mm x 28mm x 22mm
5
5
FIT1122
FIT1128
15mm x 1/2”
10
Branch and One End
Reduced Tee
Pack Code
Qty. No.
Price
Each £
5.20
13.41
Price
Each £
15mm x 10mm x 10mm
5
FIT1515
5.20
22mm x 15mm x 15mm
28mm x 22mm x 22mm
5
5
FIT1522
FIT1528
5.20
13.41
Two Ends Reduced Tee
Pack Code
Qty. No.
FIT1622
Price
Each £
5.29
3.49
Price
Each £
4.58
FIT1715
Complete with E.P.D.M. Sealing Washer. Spare flat seal included
Tank Connector
(Cold water only)
Pack Code
Qty. No.
15mm x 1/2”
22mm x 3/4”
10
10
Price
Each £
3.12
3.98
FIT3815
FIT3822
Complete with E.P.D.M. Sealing Washer (tighten by hand)
Wall Plate Elbow (Brass)
Pack Code
Qty. No.
15mm x 1/2” BSP
5
Polybutylene Double Sided
Manifold
Pack Code
Qty. No.
Price
Each £
15mm x 15mm x 22mm
5
Spigot Blank Ends
(Not suitable for use with compression fittings)
Pack Code
Qty. No.
10mm
10
FIT910
0.99
15mm
10
22mm (with reinforcing sleeve) 10
FIT915
FIT922
0.91
1.12
22mm x 10mm – 2 Port
(Socket/Socket)
5
FIT2822
9.37
Price
Each £
(Socket/Socket)
5
FIT4822
10.79
Polybutylene Single Sided
Manifold
Pack Code
Qty. No.
(Socket/Socket)
1
FIT7322104
11.06
1
FIT7322153
9.27
Price
Each £
Socket Blank Ends
Pack Code
Qty. No.
10mm
10
FIT1910
2.44
15mm
10
FIT1915
2.45
22mm
28mm
10
5
FIT1922
FIT1928
2.97
4.18
Pack Code
Qty. No.
15mm x 1/2” (1)
10
FIT715
3.64
(Socket/Socket)
15mm x 3/4” (2)
22mm x 3/4” (2)
5
5
FIT71534
FIT722
4.29
4.74
Stopcock
Price
Each £
(1) C
omplete with E.P.D.M. Sealing Washer. Spare flat seal included
34
www.polypipe.com
Price
Each £
Qty. No.
End Reduced Tee
17.96
FIT1315
(Cold water only)
Pack Code
Qty. No.
15mm x 15mm
22mm x 22mm
5
5
MDPE Stopcock
(Cold water only)
Pack Code
Qty. No.
20mm MDPE x 15mm
25mm MDPE x 22mm
5
5
Price
Each £
Price
Each £
Price
Each £
10.04
13.55
FIT2615
FIT2622
Price
Each £
FIT262015
FIT262522
12.74
18.44
www.polypipe.com
35
PolyFit
PolyFit
Pack Code
Qty. No.
15mm
22mm
5
5
Shut-Off Valve (White)
Pack Code
Qty. No.
15mm x 15mm Warm/Cold
Appliance Valve (White)
15mm x 3/4” Warm/Cold
Service Valve (White)
15mm x 1/2”
5
FIT3115
FIT3122
FIT5915
Pack Code
Qty. No.
5
FIT6115
Pack Code
Qty. No.
5
FIT6515
5
5
FIT8515
FIT8522
Chrome Plated Service Valve Pack Code
with Tap Connector (Brass)
Qty. No.
15mm x 1/2”
22mm x 3/4”
Male BSPT Adaptor
(DZR Brass Body)
20.54
25.38
Price
Each £
6.76
5
5
FIT8615
FIT8622
Pack Code
Qty. No.
Price
Each £
5
FIT422015
8.66
25mm x 15mm
25mm x 22mm
5
5
FIT422515
FIT422522
12.93
10.23
Spigot Draincock (Brass)
Pack Code
Qty. No.
15mm
10
9.79
22mm
5
PB6322
13.67
Spares Component Kit
Pack Code
Qty. No.
Price
Each £
10mm
10
FIT9510
2.30
21.46
48.10
15mm
10
FIT9515
1.48
22mm
28mm
10
5
FIT9522
FIT9528
1.89
5.44
Fitting Release Aid
Pack Code
Qty. No.
Price
Each £
21.25
52.17
Price
Each £
9.77
9.95
16.19
31.82
FIT4415
FIT4422
www.polypipe.com
Price Per
Pack £
8.52
FIT4322
FIT4328
FIT441012
2.00
2.19
PB6315
FIT4315
10
10
PB3910
PB3915
Price
Each £
5
10
5
10
Pack Code
Qty. No.
11.98
15mm
Price
Each £
10
15mm x 1/2”
22mm x 3/4”
FIT3615
Price
Each £
Pack Code
Qty. No.
22mm x 3/4”
28mm x 1”
36
20mm x 15mm
(Bend radius is 8 x pipe diameter)
15mm x 1/2”
10mm x 1/2”
Price
Each £
Bend Former
5.98
FIT431012
Pack Code
Qty. No.
Pack Code
Qty. No.
10
10
10
(Cold water only)
10mm
15mm
10mm x 1/2”
Female BSP Adaptor
(DZR Brass Body)
MDPE x PolyFit Adaptor
Radiator Connector
(Bend “RCB”)
Chrome Plated Service Valve Pack Code
(Brass)
Qty. No.
15mm x 15mm
22mm x 22mm
Price
Each £
Gate Valve
Price
Each £
7.60
11.02
15.79
Set of 4 for 10mm, 15mm,
22mm and 28mm fittings,
Per
a useful tool to assist in
Set
demounting PolyMax and
PolyFit fittings, but not essential
FITAID
Conical E.P.D.M. Sealing
Pack Code
Washer (For Tap Connector with Brass Nut) Qty. No.
1/2”
3/4”
20
20
PB9312
PB9334
Flat E.P.D.M. Sealing Washer Pack Code
(For Hand Tightened Tap Connector)
Qty. No.
1/2”
3/4”
20
20
PB9412
PB9434
‘O’ Rings E.P.D.M. Rubber
(Must be lubricated)
Pack Code
Qty. No.
3/4”
20
PB9034
Price
Each £
Price Per
Pack £
2.19
Price Per
Pack £
4.19
4.19
Price Per
Pack £
4.19
4.19
Price Per
Pack £
8.09
www.polypipe.com
37
PolyFit
PolyFit
Pack Code
Qty. No.
Price Per
Pack £
10mm
50
FIT2210
11.80
15mm
50
FIT2215
16.01
22mm
28mm
50
50
FIT2222
FIT2228
20.22
23.59
Pipe Stiffener (Plastic)
(Must be used with Polybutylene Pipe)
Pack Code
Qty. No.
10mm
20
PB6410
7.46
15mm
50
PB6415
18.16
22mm
28mm
50
20
PB6422
PB6428
22.61
13.45
Pipe Stiffener
(Stainless Steel)
Pack Code
Qty. No.
Price Per
Pack £
Price Per
Pack £
10mm
20
PB6410M
8.83
15mm
22mm
50
50
PB6415M
PB6422M
21.51
26.80
Sealed Stiffener - Plastic
(Not for use with PolyPlumb)
Pack Code
Qty. No.
15mm
22mm
50
50
Pack Code
Qty. No.
10mm to 22mm
1
PB781
19.14
Pack Code
Qty. No.
Price
Each £
1
PB778
29.03
Replacement Blade
for Ratchet Cutter
1
PB779
15.38
Self Adhesive
Aluminium Tape
Pack Code
Qty. No.
Price
Each £
24
(Do not stick to PolyPlumb pipes)
PB6415S
PB6422S
Price Per
Pack £
30.33
37.75
Price
Each £
ALTP
14.71
System Test Kit
Pack Code
Qty. No.
Price
Each £
System Test Kit
1
PB993
523.53
Pack Code
Qty. No.
Price
Each £
10
38
www.polypipe.com
RTP10
9.08
www.polypipe.com
39
PolyFit Hoses
Price
Each £
150mm x 15mm x 1/2”
2
FIT5715
8.79
300mm x 15mm x 1/2”
2
FIT6815
8.06
300mm x 15mm x 3/4”
2
FIT681534
300mm x 22mm x 3/4”
2
FIT6822
9.27
500mm x 15mm x 1/2”
2
FIT8315
11.60
500mm x 15mm x 3/4”
2
FIT831534
13.12
500mm x 22mm x 3/4”
2
FIT8322
13.98
1000mm x 15mm x 1/2”
2
FIT8015
22.32
1000mm x 15mm x 3/4”
1000mm x 22mm x 3/4”
2
2
FIT801534
FIT8022
25.20
28.25
Flexible Hose Tap Connector
Pack Code
with Service Valve
Qty. No.
300mm x 15mm x 1/2”
2
FIT8415
21.33
300mm x 22mm x 3/4”
2
FIT8422
38.87
500mm x 15mm x 1/2”
500mm x 15mm x 3/4”
2
2
FIT8715
FIT871534
27.69
30.47
Hoses
Our flexible hose connector range provides the choice
of length, end connection and valve options, suitable for
a wide range of projects.
Many of our flexible connectors include the PolyFit one
step joint feature, which are quick and easy to install and
are ideal for use in tricky to reach or tight locations.
All PolyFit hoses which have a tap connector nut contain
captive rubber seals, ensuring that seals are not lost
of damaged on site.
10.15
Price
Each £
Flexible PolyFit Connector
with Service Valve
Pack Code
Qty. No.
Price
Each £
300mm x 15mm x 15mm
2
FIT8815
22.12
500mm x 15mm x 15mm
2
FIT8915
25.40
Flexible PolyFit Connector
Pack Code
Qty. No.
300mm x 15mm x 15mm
2
FIT8115
10.92
300mm x 22mm x 22mm
2
FIT8122
13.37
500mm x 15mm x 15mm
500mm x 22mm x 22mm
2
2
FIT8215
FIT8222
16.05
18.25
Monobloc Mixer Tap
Flexible Connector
PolyFit Hoses
Flexible Hose Tap Connector Pack Code
Qty. No.
Price
Each £
Pack Code
Qty. No.
Price Per
Pair £
300mm x 15mm x M10
2
FIT7515M10
16.21
300mm x 15mm x M12
2
FIT7515M12
16.21
Supplied in pairs with offset nuts to aid installation to mixer tap
40
www.polypipe.com
www.polypipe.com
41
PolyFit Hoses
Pack Code
Qty. No.
Price
Each £
8.58
300mm x 15mm x 1/2”
2
FIT9615
300mm x 22mm x 3/4”
2
FIT9622
9.49
500mm x 15mm x 1/2”
500mm x 22mm x 3/4”
2
2
FIT9815
FIT9822
12.18
14.60
Compression Flexible Hose Tap
Connector with Service Valve
Pack Code
Qty. No.
Price
Each £
300mm x 15mm x 1/2”
2
FIT9715
19.97
300mm x 22mm x 3/4”
2
FIT9722
36.39
90° Elbow Flexible
Hose Connector
Pack Code
Qty. No.
90° Elbow
2
42
www.polypipe.com
FIT7115
Compression Flexible
Hose Tap Connector
PolyFit Hoses
Price
Each £
11.46
www.polypipe.com
43
PolySure
Straight Couplers
Pack Code
Qty. No.
15mm
22mm
10
10
90° Elbow
Pack Code
Qty. No.
15mm
22mm
10
10
Equal Tees
Pack Code
Qty. No.
15mm
22mm
10
10
Price
Each £
PolySure
Plastic Bodied PolySure Fittings
4.38
8.74
SUR015P
SUR022P
Price
Each £
4.67
10.17
SUR115P
SUR122P
Price
Each £
6.56
14.39
SUR215P
SUR222P
Metal Bodied PolySure Fittings
Permanent press fit plumbing
PolySure is our radial press fit system, available in
UK sizes, in both metal and plastic bodied solutions,
and installed using specialist crimping tools.
Straight Couplers
Pack Code
Qty. No.
Price
Each £
10mm
10
SUR010
15mm
10
SUR015
5.47
22mm
28mm
10
10
SUR022
SUR028
10.92
16.45
Socket x Socket Reducer
Pack Code
Qty. No.
15mm x 10mm
10
SUR5815
22mm x 15mm
10
SUR5822
28mm x 15mm
28mm x 22mm
10
10
SUR582815
SUR5828
90° Elbow
Pack Code
Qty. No.
10mm
6.35
Price
Each £
6.54
8.79
14.86
16.45
Price
Each £
PolySure features secure, tamperproof jointing technology
for a permanent fit. The slim profile fittings are ideal for
use in visible installations. An inbuilt location washer
ensures the crimping tool jaws are correctly positioned
for accurate fitting and a visual socket depth indicator
and double O-ring seal provides enhanced jointing.
10
SUR110
5.74
15mm
10
SUR115
5.83
22mm
28mm
10
10
SUR122
SUR128
12.74
18.51
Equal Tees
Use PolySure with Polypipe white or grey polybutylene
flexible pipe.
Pack Code
Qty. No.
15mm
10
SUR215
8.19
22mm
28mm
10
10
SUR222
SUR228
18.00
34.39
PolySure can be used in any hot and cold water installation
but is particularly suited to buildings with high levels
of public access traffic, where security and joint integrity
are paramount.
44
www.polypipe.com
Price
Each £
www.polypipe.com
45
PolySure
End Reduced Tees
Pack Code
Qty. No.
22mm x 15mm x 22mm
10
SUR1422
15.54
Can be used with Manual Pressing Tool
(not 28mm) or Standard Battery Operated
Pressing Gun
28mm x 22mm x 28mm
10
SUR1428
24.35
Branch Reduced Tees
Pack Code
Qty. No.
15mm x 15mm x 10mm
10
SUR1115
Price
Each £
Price
Each £
9.42
22mm x 22mm x 15mm
10
SUR1122
15.54
28mm x 28mm x 15mm
28mm x 28mm x 22mm
10
10
SUR112815
SUR1128
20.62
24.35
Branch and End
Reduced Tees
Pack Code
Qty. No.
22mm x 15mm x 15mm
10
28mm x 22mm x 22mm
10
Pack Code
Qty. No.
15mm x 1/2” (1)
10
SUR715
15mm x 3/4” (2)
22mm x 3/4” (2)
10
10
SUR71534
SUR722
Bent Tap Connector
Pack Code
Qty. No.
15mm x 1/2” (1)
10
Price
Each £
10mm
1
JAW10TH
192.67
15mm
1
JAW15TH
192.67
22mm
28mm
1
1
JAW22TH
JAW28TH
192.67
205.29
Mini Pressing Jaws Polypipe
TH Profile
Can only be used with Mini Battery
Operated Pressing Gun
Pack Code
Qty. No.
Price
Each £
10mm
1
MJAW10TH
151.02
15mm
1
MJAW15TH
151.02
SUR1522
13.77
SUR1528
22.85
22mm
28mm
1
1
MJAW22TH
MJAW28TH
151.02
151.02
Pack Code
Qty. No.
11.42
10mm to 22mm
1
PB781
19.14
12.35
14.01
Pack Code
Qty. No.
Price
Each £
1
PB778
29.03
Replacement Blade
for Ratchet Cutter
1
PB779
15.38
Manual Pressing Tool
Pack Code
Qty. No.
Price
Each £
Manual Pressing Tool
(Jaws purchased separately)
1
183.67
Pipe Chamfering Tool
Pack Code
Qty. No.
SUR1715
Price
Each £
Price
Each £
11.48
Male BSP Adaptor
Pack Code
Qty. No.
15mm x 1/2”
10
SUR4315
4.65
22mm x 3/4”
28mm x 1”
10
10
SUR4322
SUR4328
8.85
13.06
Female BSP Adaptor
Pack Code
Qty. No.
15mm x 1/2”
10
22mm x 3/4”
28mm x 1”
10
10
Compression Adaptor
Pack Code
Qty. No.
15mm
22mm
10
10
www.polypipe.com
Pack Code
Qty. No.
Price
Each £
(1) Complete with E.P.D.M. Sealing Washer. Spare flat seal included
46
Standard Pressing Jaws
Polypipe TH
Price
Each £
Universal Pipe Chamfering Tool 1
Price
Each £
MANPRES
UNIPCT
Price
Each £
68.60
Individual Pipe
Chamfering Tools
Pack Code
Qty. No.
Price
Each £
10mm*
1
10PCT
SUR4415
6.08
15mm*
1
15PCT
29.78
SUR4422
SUR4428
9.07
16.75
22mm*
1
22PCT
30.32
28mm*
1
28PCT
30.32
Set of 4 Pipe Chamfering
Tools, 10, 15, 22 and 28mm**
1
SETPCT
131.55
SUR5515
SUR5522
Price
Each £
15.77
22.39
PolySure
Price
Each £
29.78
* Does not include handle
** Includes handle
www.polypipe.com
47
PolySure
PolySure
Pack Code
Qty. No.
Standard Battery Operated
Pressing Gun (Jaws purchased
separately)
1
Mini Battery Operated
Pressing Gun
Pack Code
Qty. No.
Mini Battery Operated Pressing
Gun, with battery level
1
indicator (Jaws purchased
separately)
BATPRES
MBATPRES
Price
Each £
1854.70
Price
Each £
1236.47
‘O’ Rings
Pack Code
Qty. No.
10mm
20
SUR9010
5.06
15mm
20
SUR9015
4.46
22mm
28mm
20
20
SUR9022
SUR9028
8.63
13.10
Press Sleeve and Washer
Pack Code
Qty. No.
10mm
10
SUR9510
1.59
15mm
10
SUR9515
1.37
22mm
28mm
10
10
SUR9522
SUR9528
2.74
4.12
48
www.polypipe.com
Standard Battery
Operated Pressing Gun
Price Per
Pack £
Price
Each £
www.polypipe.com
49
Underfloor
Heating Systems
Our range combines versions of traditional underfloor
systems and a number of innovative product solutions,
designed to extend the suitability of underfloor heating
to almost any installation scenario, from whole house to
single room projects and for new build and renovation.
Use the quick reference guide below to find the right
solution or, for more information, consult our
Installation Guide or use the online product selectors
Solid Floor Systems
Panel System
Rail System
Staple System
Page 54
Page 56
Page 57
Floating Floor System
Page 58
Suspended Floor Systems
Double Heat Spreader Plate
Fit From Below Double Heat Spreader Plate
Overlay™ Lite 15
Modular Heating Panels
Page 62
Page 62
Page 63
Page 64
Overlay™
Heavy floor coverings
Overlay™ Lite
Light floor coverings
Overlay™ Lite 15 Larger areas or whole
house solutions.
Page 68
Page 69
page 70
You can find out more about Polypipe Underfloor Heating
Systems at www.polypipe.com/plumbing-heating
50
www.polypipe.com
www.polypipe.com
51
Polypipe manufactures the most comprehensive range
of underfloor heating systems available for the UK market.
Coil (Grey)
Pack Code
Qty. No.
1
1
Polypipe MCP Underfloor Heating Pipe
(For Underfloor Heating Use Only) - EN21003
Price
Each £
Metal Composite Pipe
PB5015B
107.16
167.44
MCP8016B
168.56
PB8015B
1
PB10015B
213.05
MCP10016B
210.70
1
1
PB12015B
PB15015B
247.94
319.28
MCP12016B
252.84
MCP15016B
316.05
Pack Code
Qty. No.
Price
Each £
Polybutylene
Pack Code
Qty. No.
1
UFH2512B
38.16
1
UFH5012B
76.33
1
UFH8012B
122.12
1
UFH5015B
87.08
1
UFH8015B
139.32
1
UFH10015B
174.15
1
UFH12015B
208.98
1
UFH15015B
261.23
1
UFH12018B
270.90
1
1
UFH20018B
UFH30018B
451.50
677.25
Polypipe Ultra Flexible Underfloor
Heating Pipe (For Underfloor Heating
Use Only) - EN15876
Price
Each £
Conduit Pipe
Conduit Polypropylene
Pipe Coil
Pack Code
Qty. No.
1
1
52
www.polypipe.com
CPC1525
CPC1550
Price
Each £
29.35
59.03
www.polypipe.com
53
Solid Floor Systems
Floor Panel
Allow for overlap and waste when ordering
Pack Code
Qty. No.
1.2m x 1m
1
Edge Insulation
Pack Code
Qty. No.
25m Coil
1
Long Radius Bend Former
Pack Code
Qty. No.
For use as pipe guide
at bottom of manifold accepts 15mm conduit pipe
1
Panel System
Price
Each £
11.44
PB08576
Price
Each £
35.42
PB05855
Price
Each £
Solid Floor Systems
Panel System
17.57
PB6325
1
2
3
4
Insulation
Pipe
Solid floor plate
Screed
Underfloor heating
for solid screeded floors
Panel System
For optimum performance, Polypipe has the perfect
solution for installing underfloor heating into solid or
screeded floors. Utilising our unique lightweight plastic
floor panels, which are quick and easy to cut to size, it is
possible to fit Polypipe Underfloor Heating into any shaped
room. The lightweight plastic floor panels also nest for easy
storage and carrying.
Clip Rail and Staple Systems
We also provide a range of rail and staple systems that
fit directly onto the insulation, offering a more traditional
alternative to installing underfloor heating in solid or
screeded floors.
Optimum performance system
54
www.polypipe.com
www.polypipe.com
55
Solid Floor Systems
Solid Floor Systems
Staple System
Clip Rails
200mm pipe centres (15mm pipe) & 200mm
& 300mm pipe centres (18mm pipe).
Use approx 1m/m2 floor area and secure
with standard Pipe Clip PB02911.
Pack Code
Qty. No.
Price
Each £
15mm 8 x 2m pack (16m)
1
PB08515
57.81
per pack
18mm 8 x 2m pack (16m)
1
PB08518
57.81
per pack
Standard UFCH Pipe Clip
Pack Code
Qty. No.
Standard UFCH Pipe Clip
250
Edge Insulation
Pack Code
Qty. No.
25m Coil
1
Pack Code
Qty. No.
1
Clip Rail System
56
www.polypipe.com
Price
Each £
PB02911
300
PB02930
55.90
per pack
UFCH Staple Gun
1
PB02931
376.25
Edge Insulation
Pack Code
Qty. No.
1
Pack Code
Qty. No.
Price
Each £
1
17.57
1
2
3
4
5
UFCH Staple Clip (60mm)
25m Coil
Price
Each £
PB6325
Pack Code
Qty. No.
35.42
per pack
35.42
PB05855
UFCH Staple System
Staple System
Price
Each £
Price
Each £
35.42
PB05855
Clip Rail System
Price
Each £
17.57
PB6325
1
2
3
4
5
Insulation
Pipe
Edge insulation
UFCH Staple Clip
Screed
Insulation
Pipe
Edge insulation
Clip rail
Screed
www.polypipe.com
57
Pack Code
Qty. No.
Price
Each £
1.2m x 1.2m x 50mm
10
Single Heat Spreader Plate
Pack Code
Qty. No.
15mm
5
PB207
31.93
per pack
18mm
5
PB208
31.93
per pack
196.81
per pack
PB08587
Price
Each £
1
2
3
4
Insulated floating floor panel
Heat spreader plate
Pipe
Structural floor
Underfloor heating
for floating floors
The Polypipe Floating Floor System features high
density polystyrene floor panels that enhance insulation
as well as providing the base for the heating pipes.
The system is designed for use with “dry build” floors laid
directly over solid or timber sub bases in both new build
and existing properties.
Floating Floor Systems are compatible with our 15mm
and 18mm pipe systems.
58
www.polypipe.com
www.polypipe.com
59
Floor Panel
Coverage approximately 14.4m2 per
10 pack Floating Floor Panel - 100kN/m2
Fit From Above with Overlay™
Lite 15 - Suspended floor application
For enhanced performance, especially over larger floor areas,
use with our new Overlay™ Lite 15 panels for an integrated
insulated solution.
Fit From Below (FFB)
Suitable for use with traditional or composite joists,
this system offers the ability to fit from below,
even if the floor above has already been installed.
Perfect for cellars or where upper floor coverings
are already in place.
Modular Heating Panels
Underfloor heating
for suspended floors
For suspended timber and composite joists, typically
found in new build and renovation projects - Polypipe
offers a range of unique pre-insulated and pre-configured
systems, as well as more traditional suspended floor under
floor heating options. Giving you a solution for every type
of suspended floor installation.
For the ultimate quick and easy installation solution,
use our pre-configured, insulated panels that include all
the system components already integrated. The panels
are supplied in sized panels which are simply fitted and
connected together on site.
All systems
For use with our 15mm pipe systems. All suspended
floor systems are fitted within the joists so do not add
any build height to the floor.
Double Heat Spreader Plates (DHSP)
Offering a simple installation system for traditional joists
and spacings, double heat spreader plates can also be
used in ‘sprung’ flooring systems such as sports halls.
This system uses aluminium double heat spreader plates to
transmit the heat evenly across the finished floor surface.
60
www.polypipe.com
www.polypipe.com
61
Pipe grooves at 125mm each side of centre line
For 15mm Pipe, 450mm x 1m
span double indent
Pack Code
Qty. No.
5
PB209
Double Heat
Spreader Plate
1
2
3
4
5
6
Overlay™ Lite 15
Price
Each £
Overlay™ Lite 15 Floor Panel
Pack Code
Qty. No.
83.80
per pack
1200mm (L) x 800mm (W)
x 22mm (D) Coverage approx.
9.6m2 per 10 pack
10
Ceiling
Supporting joists
Insulation
Double heat spreader plate
15mm Polybutylene barrier pipe
Structural floor
Fit From Above
With Overlay™
Lite 15
Price
Each £
409.19
per pack
PB08030
1
2
3
4
5
6
Ceiling
Supporting joists
Board
Overlay™ Lite 15
Structural floor
FFB Double Heat Spreader Plate
FFB Double Heat
Spreader Plate
Pack Code
Qty. No.
For 15mm Pipe, 310mm x 1m
span double indent
5
Fit From Below (FFB)
Double Heat
Spreader
Plate
62
www.polypipe.com
Price
Each £
119.72
per pack
PB206
1
2
3
4
5
6
Ceiling
Supporting joists
Insulation
FFB Double heat spreader plate
Structural floor
www.polypipe.com
63
MHP (Modular Heating Panel)
Pack Code
Qty. No.
330mm x 1.3m
5
MHP33013
138.45
per pack
380mm x 1.3m
5
MHP38013
138.45
per pack
330mm x 2.0m
5
MHP33020
184.60
per pack
380mm x 2.0m
5
MHP38020
184.60
per pack
490mm x 1.3m
5
MHP49013
184.60
per pack
490mm x 2.0m
5
MHP49020
246.13
per pack
MHP (Modular
Heating Panel)
64
www.polypipe.com
Price
Each £
1
2
3
4
5
6
MHP
(Modular Heating Panel)
Ceiling
Supporting joists
30mm insulation
Heat diffusion foil
10mm pipe circuit
Structural floor
www.polypipe.com
65
Existing Floors
& Low Profile Systems
Overlay™
Overlay™ accommodates all types of project and floor
coverings and the only choice, is that of which panel will
be most appropriate for the installation. Both Overlay™
and Overlay™ Lite can be used for the majority of projects,
however the choice of Overlay™ is determined by floor
covering selection. Overlay™ and Overlay™ Lite can be
used as appropriate in the same project.
The more structural nature of Overlay™ however makes
it ideal for direct tiling or application of floor finishes
which need to be fixed or screwed to the panel.
Overlay™ Lite
Overlay™ Lite is the ideal solution for laminate and
engineered wood floors which should be laid directly
over the system.
Overlay™ Lite products are easy to install making
it ideal for larger floor areas.
Underfloor heating
that goes over the floor
For existing solid or timber deck floors - Polypipe’s
unique Overlay™ underfloor heating range of low profile
systems are installed over the existing floor. This makes
them ideal for renovation and new build, whole house
and single room projects.
Overlay™ Lite 15
Slightly deeper profile, which can be used on top
of a supporting floor or as a low profile alternative
to floating floor. The system delivers the same
responsive heat but is configured to be more
suitablefor larger, “whole house” projects.
66
www.polypipe.com
www.polypipe.com
67
Overlay™ Floor System
Overlay™ Lite Floor System
Choose Overlay™ original floor panels for use with
heavier floor coverings such as tiles and ceramics.
Overlay™ Lite
Overlay™ Floor Panel
Pack Code
Qty. No.
Price
Each £
800mm (L) x 600mm (W)
4.8m2 per 10 pack
10
PB08570
205.40
per pack
800mm (L) x 600mm (W)
14·4m2 per 30 pack
30
PB08571
616.29
per pack
End Returns
(Overlay™ & Overlay™ Lite)
Pack Code
Qty. No.
End Returns
10
Polyurethane Expanding
Foam Glue
Pack Code
Qty. No.
Polyurethane Expanding
Foam Glue (Overlay™)
1
PB776
18.45
Adaptor Set
Pack Code
Qty. No.
Price
Each £
15mm x 12mm including
Pipe Stiffeners per pack
2
Temperature Limiting Valve
Pack Code
Qty. No.
5m2 Overlay™ only
1
Price
Each £
32.24
per pack
PB08573
Price
Each £
5.54
PB181512
Price
Each £
PB970010
88.76
Overlay™ Lite Floor Panel
1245mm (L) x 600mm (W) x
18mm (D) Coverage approx.
7.5m2 per 10 pack
1245mm (L) x 600mm (W)
15m2 per 20 pack
Pack Code
Qty. No.
Price
Each £
10
PB08010
319.69
per pack
20
PB08020
639.40
per pack
Self Adhesive
Aluminium Tape
Pack Code
Qty. No.
24
ALTP
14.71
End Returns
Pack Code
Qty. No.
Price
Each £
End Returns
10
Adaptor Set
Pack Code
Qty. No.
15mm x 12mm including
Pipe Stiffeners per pack
2
Overlay™
Choose Overlay™ Lite floor panels for use with lighter
floor coverings such as carpet and laminates.
Price
Each £
32.24
per pack
PB08573
Price
Each £
5.54
PB181512
1
2
3
4
5
6
7
Fits over concrete or floorboards
OverlayTM Lite panel
Heat diffusion foil
12mm polybutylene barrier pipe
End return
10mm plywood lining
Suitable for laminate floors
or carpet
1 Fits over concrete
or floorboards
2 600mm x 800mm x 18mm
OverlayTM panel
3 12mm polybutylene barrier pipe
4 End return
5 Suitable for tiles and hard
wood floors
68
www.polypipe.com
www.polypipe.com
69
Overlay™ Lite Floor System
Choose Overlay™ Lite 15 floor panels,
with 15mm pipe, for larger floor areas.
Overlay™ Lite 15
Pack Code
Qty. No.
1200mm (L) x 800mm (W)
9.6m2 per 10 pack
10
PB08030
409.19
per pack
Connection / Return panel
10
PB08040
107.50
per pack
Self Adhesive
Aluminium Tape
Pack Code
Qty. No.
24
ALTP
Price
Each £
Overlay™ Lite 15 Floor Panel
Price
Each £
14.71
1 Fits over concrete
or floorboards
2 OverlayTM Lite 15 panel
3 Heat diffusion foil
4 15mm polybutylene barrier pipe
5 End return
6 10mm plywood lining
7 Suitable for most floor coverings
70
www.polypipe.com
www.polypipe.com
71
Manifolds & Water
Temperature Controls
Polypipe offers a broad range of manifold and
water temperature controls for both traditional and
underfloor heating applications.
We offer a range of 15mm push fit manifolds for use with 12mm
and 15mm pipe systems and compression manifolds for use with
our 16mm and 18mm pipe systems.
Each Polypipe manifold includes a flow meter on each flow port to
provide a visual indicator of the flow through rate of each circuit.
Polypipe also offers a range of water temperature control units.
These are used to reduce the water temperature for underfloor
heating systems, when connected to the same boiler used
for radiators or stored hot water, which operate at higher
temperatures than underfloor systems.
72
www.polypipe.com
www.polypipe.com
73
Manifolds & Water Temperature Controls
Manifolds are used in all underfloor heating systems above 30m2,
irrespective of floor type. Manifolds are supplied complete and
fixed with a wall mounting bracket. The manifold comes complete
with a drain and air vent assembly, which can be positioned
on either end of the manifold, and isolation valves are supplied
separately for the supply end of the manifold.
Underfloor Heating Manifolds
and Ancillaries
For use with 15mm and 12mm Overlay™ Systems
Pack Code
Qty. No.
Price
Each £
2 Port - Pushfit Manifold
1
PB12737
191.24
1
PB12738
230.21
1
PB12739
283.33
1
PB12740
304.59
1
PB12741
363.04
1
PB12742
398.45
1
PB12743
442.72
1
PB12744
481.66
1
PB12745
522.41
1
1
PB12746
PB12747
566.68
610.95
Pack Code
15mm Manifold Extension Kit
Qty. No.
Price
Each £
Underfloor Central Heating
Manifold Extension Kit
109.96
16mm and 18mm
Compression Manifold
For use with 16mm MCP and 18mm systems
1
PB12736
Pack Code
Qty. No.
UFCH Manifold Bends (90°)
Allows pump unit and
manifold to be corner
mounted, can be used with
1
UFCH Control Pack
or Modulating Pump Unit (Pair)
Pack Code
Qty. No.
1 inch - Isolation Valves - use
to connect manifolds to
both UFCH Control Pack &
Modulating Pump Unit (Pair)
1
Manifold Flow Meter
1
Price
Each £
Manifold Balancing Valve
Pack Code
Qty. No.
Manifold Balancing Valve
1
Manifold Blue Cap
Pack Code
Qty. No.
Manifold Blue Cap
1
Manifold End Set
Pack Code
Qty. No.
Manifold End Set (Pair)
1
Temperature Gauge
Pack Code
Qty. No.
Temperature Gauge
1
PB08351
191.24
PB08392
230.21
4 Port - Compression Manifold 1
PB08459
283.33
PB08462
304.59
PB08479
363.04
PB08558
398.45
PB08563
442.72
PB08564
481.66
PB08572
522.41
PB08588
PB08589
566.68
610.95
To be used on each Manifold Port
16mm
18mm
74
Pack Code
Qty. No.
1
1
www.polypipe.com
PB07729
PB07730
Price
Each £
39.08
Manifold Spares and Accessories
Pack Code
Qty. No.
49.07
Price
Each £
PB01732
Manifold Flow Meter
Price
Each £
PB12735
Isolation Valves
Use with Manifold Unions
16mm and 18mm
Manifold Unions
Pack Code
Qty. No.
Price
Each £
PB127FM
18.28
15mm Manifold Pushfit
Underfloor Heating Manifolds
and Ancillaries
Price
Each £
PB127BV
13.95
Price
Each £
PB127BC
2.00
Price
Each £
PB127ES
46.53
Price
Each £
PB127TG
17.61
4.84
4.84
www.polypipe.com
75
Water Temperature Controls
and Accessories
Multiple Room Systems
Manifold Control Pack
Pack Code
Qty. No.
Price
Each £
UFCH Control Pack - Includes
EUP Pump, UFCH Mixer Valve,
bend and adaptors
1
483.75
2 Port Zone Valve
Pack Code
Qty. No.
2 Port Spring Return
Zone Valve
1
UFCH Mixing Valve
Pack Code
Qty. No.
Price
Each £
22mm
28mm
1
1
155.52
173.60
PB9700ZV
PB219058
PB219059
Price
Each £
80.63
PB970025
Single Room Systems
Single Room Control Units
Pack Code
Zonal Regulation Units (ZRU) Qty. No.
Price
Each £
ZRU Single circuit
548.04
1
PB970018
Single Room Control Units
Pack Code
Zonal Regulation Units (ZRU) Qty. No.
Price
Each £
ZRU 2/3 circuit
1
569.54
Pack Code
Qty. No.
5m2 Overlay™ only
1
76
www.polypipe.com
PB970028
PB970010
Price
Each £
88.76
www.polypipe.com
77
Room Temperature
Controls
Polypipe supplies a comprehensive range of room
temperature control products for use on both
Polypipe Underfloor Heating Systems and for general
use to control heating temperatures in different
rooms or control zones.
The range is designed to enable users to configure their heating
system to create their preferred balance of comfort and efficiency.
Unique programming functions also provide the perfect control
solution for Polypipe Underfloor Heating Systems.
Polypipe Room Temperature Controls are available in a wide
range of options, including dial, digital and programmable room
thermostats, in both wired and RF version, time clocks and master
and slave systems.
Use our online controls selector tool for help with selecting the right
controls system at www.polypipe.com/plumbing-heating
78
www.polypipe.com
www.polypipe.com
79
Pack Code
Qty. No.
Price
Each £
2 Zone Master Unit - Provides
hard wired connections for
Boiler, Zone Valve, UFH pump,
power supply and Actuators
(2 zone). Provides RF
Connectivity for RF Clock and
up to 2 RF Thermostats
1
PB2ZM RF
215.00
4 Zone Slave Unit RF - Plug in
connection to PB2ZM RF and
provides RF connectivity for
up to 4 Zones
1
PB4ZS RF
107.50
RF Receiver - Remote RF
receiver providing connectivity
and to any RF Thermostat or
time clock (switches 230V)
1
PB REC RF
48.38
123.63
Wet Room Sensor
Pack Code
Qty. No.
Pack Code
Qty. No.
Price
Each £
1
2 Channel
4 Channel RF
1
1
64.50
107.50
Includes 3m Sensor Cable Connects to all wired and RF
Room Thermostats for remote
sensing in wet rooms
Wiring Centres
Pack Code
Qty. No.
UFCH Valve Actuators
Pack Code
Qty. No.
2 Wire
4 Wire
1
1
Room Thermostats
Pack Code
Qty. No.
Dial Room Thermostat
1
PBRS
48.38
Dial Room Thermostat RF
1
PBRS RF
69.88
Digital Thermostat
1
PBDIG
69.88
Digital Thermostat RF
1
PBDIG RF
86.00
Programmable Room
Thermostat
1
PBPRP
90.12
Programmable Room
Thermostat RF
1
PBPRPS RF
Time Clocks
PB2CTC
PB4CTC RF
32.41
53.02
Price
Each £
PB1ZM
98.69
4 Zone Slave Unit - Plug-in
connection to Master Unit to
provide 4 Control Zones
1
PB4ZS
86.02
6 Zone Slave Unit - Plug-in
connection to Master Unit to
provide 6 Control Zones
1
PB6ZS
104.49
www.polypipe.com
For RF Room Thermostats and Clocks
Price
Each £
PB23020
13.01
Price
Each £
Single Zone Master Control Unit
- Provides wiring connections
for Boiler, Zone Valve, UFH
1
Pump and Power Supply and
Single Room Thermostat
80
Wiring Centres
For wired room thermostats and clocks
PB00401
PB00402
Price
Each £
www.polypipe.com
81
Room Packs
Room Packs
1.Select the floor type applicable for the room
from the following options:
Solid Floor (Code So)
Overlay™ (Code O)
Overlay™ Lite (Code OL)
Pack
Code
Pack
Code
Pack
Code
Pack
Code
Overlay™ Single Room Packs
O5B
O12Z
O20Z
O30Z
Product
Qty
Qty
Qty
Qty
Overlay™ Temperature Limiting Valve
1
Overlay™ Panel (Pack of 10)
1
1
Overlay™ Panel (Pack of 30)
Overlay™ End Returns (Pack of 10)
2.Select the total heated floor area for the room
and round up to the following options:
Solid Floor 12m2 (Code 12) 20m2 (Code 20) 30m2 (Code 30) Room Packs
Overlay™
Overlay™ Lite
5m2 (Code 5)12m2 (Code 12)
12m2 (Code 12)20m2 (Code 20)
20m2 (Code 20)30m2 (Code 30)
30m2 (Code 30)
3.Add the control:
1
1
1
2
2
4
6
Overlay™ Pipe (12mm x 80m)
1
1
2
3
Overlay™ Glue
1
1
2
2
12 x 15mm Adaptors (Pack of 2)
1
1
15mm PolyPlumb Tees
15mm PolyPlumb Spigot Elbows
ZRU (Zonal Regulation Unit)
Overlay™ Lite Single Room Packs
1
2
3
2
4
2
4
1
1
OL12Z
OL20Z
OL30Z
Qty
Qty
Qty
ZRU – For connection to existing heating (Code Z)
A dedicated Overlay™ Bathroom Pack (O5B) is available for rooms
up to 5m2. This is supplied with a temperature limiting valve for
connection to existing heating systems, so no control method need
be specified.
Overlay™ Lite Panel (Pack of 20)
1
1
2
Overlay™ End Returns (Pack of 10)
2
4
6
EXAMPLE:
The order code for a 12m2 solid floor with a ZRU would be:
Overlay™ Pipe (12mm x 80m)
1
2
3
Self Adhesive Aluminium Tape
1
2
2
12 x 15mm Adaptors (Pack of 2)
1
So
12
Product
Overlay™ Lite Panel (Pack of 10)
15mm PolyPlumb Tees
Z
Solid Floor
12m2 Floor Area
Room Pack
Availability
Floor Type
Area M2
Control Type
1
2
3
List Price
Each £
O5B
Overlay™
5
Temp. Limiting Valve
333.25
O12Z
Overlay™
12
ZRU
923.43
O20Z
Overlay™
20
ZRU
1182.50
O30Z
Overlay™
30
ZRU
1527.58
OL12Z
Overlay™ Lite
12
ZRU
923.43
OL20Z
Overlay™ Lite
20
ZRU
1182.50
OL30Z
Overlay™ Lite
30
ZRU
1527.58
So12Z
Solid
12
ZRU
652.53
So20Z
Solid
20
ZRU
832.05
So30Z
Solid
30
ZRU
1047.05
82
www.polypipe.com
2
3
2
4
2
4
1
1
1
So12Z
So20Z
So30Z
Control Type
Solid Floor Single Room Packs
Pack Number
1
Qty
Qty
Qty
Screeded Solid Floor Panels
Product
12
20
30
15mm x 100m Pipe Coil
1
2
3
Edge Insulation
1
1
2
Pipe Stiffeners
1
15mm PolyPlumb Tees
1
1
1
2
4
2
4
1
1
www.polypipe.com
83
This range of underfloor heating packs contains all the flooring and
control equipment required for a single room project. Please note
that all Room Packs have a maximum output of 100W/m2.
Renewable
Pipe Systems
Polypipe offers a range of pre-insulated pipe
systems, which provide flexibility, durability and
availability when required.
These systems meet the growing demand for products that are
suitable for renewable heat sources such as remote boilers and
heat pumps. Installation is fast and easy, requiring just a single
lay of the flow and return pipes, which are both contained in a
single casing. The inner water bearing pipes are PEX barrier pipes,
which are contained in a corrugated HDPE outer casing.
Polypipe pre-insulated pipes are fastened using brass mechanical
clamp fittings, which require no special tools or equipment.
84
www.polypipe.com
www.polypipe.com
85
Pre-Insulated Pipes
Outside casing 160mm (OD) Bend radius 0.5m
25mm x 10m, PE-Xa 2mm x 25mm
(OD) 20 DN (ID)
(OD) 20 DN (ID)
(OD) 20 DN (ID)
(OD) 25 DN (ID)
(OD) 25 DN (ID)
(OD) 25 DN (ID)
Price
Each £
1
INS1025-2-HTG
435.35
1
INS1525-2-HTG
653.04
British Standard Class S rated to BS7291 Part 1 and
Kitemark Licence Number 38148 to BS7291 Part 1 & 2.
1
INS2025-2-HTG
870.70
PolyPlumb polybutylene barrier pipe, fittings and
accessories are covered by BBA Certificate No 00/3699.
1
INS1032-2-HTG
512.89
Listed in the WRAS Water Fittings and Materials Directory.
1
INS1532-2-HTG
769.35
1
INS2032-2-HTG
1025.80
Standards Manufacturing Quality Assurance in accordance with BS EN ISO 9001
(BSI registered firm Certificate FM00318).
Max operating pressure: 6 bar. Max fluid temperature: +95°C. PE-Xa pipes: SDR 11.
Carrier pipes are individually identified as flow and return.
Dust Cap
Pack Code
Qty. No.
160mm x 25mm Dust Cap
160mm x 25mm Dust Cap
1
1
Heat Shrink Cap
Pack Code
Qty. No.
Price
Each £
160mm Heat Shrink Cap
1
112.07
Insulation Kit
Pack Code
Qty. No.
For Coupler
160mm (OD) to fit outside casing,
1
1000mm (L) 180mm (OD)
INS160-25-2DC
INS160-32-2DC
INS160-3225-2HSC
INS160IKC
Price
Each £
11.15
11.15
For PEX pipe
Pack Code
Qty. No.
25mm (OD)/2.3 (w/t) thread ¾” 1
32mm (OD)/2.9 (w/t) thread 1” 1
INS25MC-HTG
INS32MC-HTG
Pack Code
Qty. No.
25mm, thread ¾”
32mm, thread 1”
1
1
Fix Points
Pack Code
Qty. No.
25mm, thread ¾” FF
32mm, thread 1” FF
1
1
INS25FC-HTG
INS32FC-HTG
INS25FP-HTG
INS32FP-HTG
Price
Each £
26.53
34.78
Price
Each £
5.17
7.59
Price
Each £
9.35
21.24
Fix points must be installed to absorb the possible effects of thermal expansion/
shrinkage of the PE-Xa transport pipe. The non application of fixed points may
result in serious damage to pipes, joints and buildings.
86
www.polypipe.com
At Polypipe we pride ourselves on offering the highest quality products, and
wherever possible our products and processes are covered by independent
third-party accreditation, so you can rest easy knowing that you are buying
from the UK’s market leading manufacturer. We have invested significantly
in our quality control procedures, have our own fully-equipped modern
laboratory for development and analysis, and also have our own tooling and
extrusion processes.
P.B.P.S.A. - Polypipe Building Products is a member of the
Polybutylene Piping Systems Association which is a recognised
association of companies whose aim is to promote the
features, benefits and best practice installation techniques
of polybutylene pipe systems as well as providing a wide range
of technical information and support. The P.B.P.S.A. web site
can be found at www.PBPSA.com.
90.78
Max operating pressure: 10 bar. Max fluid temperature: +95°C. PE-Xa pipes: SDR 11.
Female Couplings
FM00318
British Gas has accepted the Polypipe ‘PolyPlumb’ & ‘PolyFit’ Class S
polybutylene pipe systems as being acceptable for open vented and sealed
central heating systems and are eligible for acceptance onto Home Care
Central Heating System Cover.
Price
Each £
Kit comprises a smooth black HDPE pipe, rock wool insulation, 2 shrink sleeves,
adhesive tape and assembly instructions. Heat shrinkable cap to be ordered separately.
Male Couplings
Polypipe meets, and constantly strives to exceed, the changing laws and
regulations governing our operations and products. We have invested in
extensive testing and development facilities to ensure the products we
supply are of the highest quality. Our plumbing systems conform to a
number of 3rd party accredited standards which are listed below.
Pack Code
Qty. No.
Installation Standard
Installation must follow the requirements of BS5955 - PART 8 2001
Plastic Pipework (Thermoplastic Materials).
Guarantee
Polypipe guarantees for 25 years against defects in materials or manufacture
of the Polyplumb and Polyfit hot and cold water supply and heating systems
from date purchased.
This guarantee only applies if the products are installed in accordance with the
manufacturer’s recommendations and are used in a normal domestic operation.
A normal domestic operation is defined as a residential property and
excludes commercially run residential properties e.g. care homes and is also
defined as being part of an open vented or sealed central heating system,
direct or indirect single pipe hot water supply or mains or tank fed cold
water supply system.
The system must be designed, installed and operated within the
temperature and pressure ratings as defined in BS 7291 Class S which are
also published in the manufacturer’s literature and must also take account
of all the other exclusions and limitations as defined in the design,
application and installation guidance provided by the manufacturer.
Exclusions apply, please contact the manufacturer for further details.
For Polypipes Contract of Sale, please refer to www.polypipe.com
www.polypipe.com
87
Pipes (Twin Pipe Coil)
Standards & Polypipe Guarantee Information
Application
Information
The Polypipe UFH and MCP underfloor heating pipes have been tested in
accordance with BS EN ISO 15876-1:2003 and BS EN ISO 21003-1:2008
respectively at a maximum design pressure of 10 bar for application class
4 - Underfloor heating and low-temperature radiators only.
The maximum operating temperature of these pipes is 60°C.
These pipes are NOT suitable for potable cold water or domestic
hot water services.
The following information is designed to provide basic guidance for
installers and specifiers when selecting Polypipe products. The information
is not exhaustive and guidance may change dependent on site conditions
and applications. This document should be read in conjunction with the
Polypipe Plumbing & Heating Product Guide. If in doubt please contact
our Technical Services Department on 01709 770000.
Service Conditions
(Continuously operated ring main
installations are excluded from
these applications.)
No
temmina
(s e p e l s y
e e ra
s
xp tu tem
l
Ma anatorrye Tf ﬂow
temximu note 1°C
be
(s e p e m
l ow
e e ra sy
)
xp tu st
Sys lanatorre Tsem se
y
t
no ° C r v
temem
te
ice
1b
( s e p e ma
elo
e e ra lfu
w)
xp tu
n
la n r
c
a to e T t i o
Sys
n
ry
no m °
te
wotem
1 bC
elo
r k i ma
w)
ng xim
pre um
ssu
re
ba
r
Grey and White Plumbing and Heating Pipe, PolyPlumb, PolyMax,
PolyFit and PolySure fittings are suitable for the following Class S service
conditions in a normal domestic operation (subject to the exceptions
referred to in note 2 below):
Indirect cold water systems
20
20
-
3½
Direct mains-fed cold
water systems
20
20
-
12½
Subsurface heating systems
(including Underﬂoor)
60
83
100
3½
Vented hot water supply systems
65
83
100
3½
Unvented hot water supply
systems including instantaneous
heaters and/or incorporating
storage
65
95
100
6
Vented central heating systems
82
95
100
3½
Sealed central heating systems
82
105
114
3
88
www.polypipe.com
Note 1:
•n
ominal system flow temperature Tf is the intended maximum flow temperature of a system for a particular
application as recommended in codes of practice and other guidance documents
•m
aximum system service temperature Ts is the maximum service temperature that can occur intermittently
during normal operation
• s ystem malfunction temperature Tm is the maximum temperature likely to be applied to pipes and fittings
in the event of control thermostat failure or malfunction
Note 2:
• certain fittings in the Polyplumb, PolyMax and PolyFit ranges are not suitable for all the Class S service
conditions. The limitations are indicated against every applicable fitting in the Trade Price List e.g.
“Cold Water Only”.
Connections to other materials
Connection to Imperial Copper using PolyPlumb
Imperial ¾” copper pipe is of significantly different size to its metric 22mm
counterpart and therefore requires a different ‘O’ ring to that supplied in
the 22mm fitting. The 22mm ‘O’ ring should be replaced with a ¾” ‘O’
ring (PB9034). Standard 15mm fittings can be connected to Imperial ½”
copper pipe, and 28mm fittings can be connected to 1” copper pipe.
Connection to Irish copper pipe
Irish copper pipe to IS238:1980 can be connected to PolyPlumb fittings
which incorporate the ¾” or 1” adaptor set. Using a standard 22mm
or 28mm PolyPlumb fitting, remove the nut and socket components and
discard. Replace these parts with the relevant adaptor set, ¾” - PB7034
or 1” - PB701. The adaptor sets are distinguishable by the black cap nut.
Connections to chrome plated and stainless steel pipework
PolyPlumb, PolyFit and PolyMax fittings should not be connected directly
to chrome plated copper pipes or stainless steel pipes. To connect to these
pipes we recommend the use of a compression coupler. A pipe stiffener
should be used when connecting Polypipe Grey and Polypipe White pipe
to a compression fitting.
Connecting PolySure press fit fittings to copper
PolySure press fit fittings have been designed specifically to fit to Polypipe
grey and Polypipe white polybutylene pipes. To connect to copper pipes
we advise the use of a PolySure press fit x BSP male or female adaptor,
with the corresponding adaptor being used on the copper side from the
PolyPlumb or PolyFit range. PTFE tape should be used to seal the mating
brass components.
Connections close to capillary fittings
Capillary fittings should preferably be completed prior to the use of
Polypipe fittings. Where this is not possible, care should be taken to ensure
that flux or solder does not come into contact with plastic pipes or fittings.
A damp cloth should be wrapped around the copper pipe close to the
nearest plastic pipe or fitting to ensure against damage by conductive
heat. Pipework should be flushed to clear flux before active use.
www.polypipe.com
89
Underfloor Heating Pipe (UFH) and MCP
Underfloor Heating Pipe (MCP)
- Application Classes
Connections to incoming cold water supply
Chlorine and other additives
There are two options for connecting incoming MDPE mains water
service pipe to Polypipe Plumbing and Heating Systems. Firstly the push
fit x compression adaptors provide a one piece transition fitting covering
connections from 20mm, 25mm and 32mm MDPE service pipes to 15mm,
22mm and 28mm polybutylene pipes and most sizes are available in both
Polypipe Grey and White versions. Secondly, as there is a requirement for
a stopcock on the incoming main there is also a combined stopcock and
adaptor which reduces the number of fittings required in a position where
there is often limited space e.g. under a kitchen sink. These products allow
connections from 20mm or 25mm MDPE pipe via a compression end
to 15mm or 22mm polybutylene using a push fit connection.
The polybutylene material used in Polypipe Plumbing and Heating Systems
is WRAS approved. It is resistant to the buildup of scale. Normal levels
of chlorine in UK domestic water supplies will not have an adverse effect
on Polypipe Plumbing and Heating Systems.
Polypipe systems are suitable for domestic plumbing and heating systems.
Pipes and fittings must not be used for gas and oil supply pipework
or compressed air pipework. In all the above instances metal pipework
should be installed.
Continuously operated re-circulating
systems (Secondary Hot Water Circulation
/ Ring main installations)
A continuously operated re-circulating system is a water-replenished
circulating system which is maintained at a constant high temperature
to provide a constant source of hot water. Continuously operated
re-circulating systems are used to distribute constant hot water to wards
or rooms that may be distant from the heat source or hot water storage
vessel. Locations where continuously operated re-circulating systems are
used include, but are not limited to, residential care homes, hospitals and
hotels. Continuously operated re-circulating systems are very different
from conventional hot water supply and central heating systems found
in domestic properties, for which our products have been tested to,
under either BS 7291 Class S or WRAS approval standards, and for this
reason PolyPlumb, PolyMax, PolyFit or PolySure must not be used on any
continuously operated re-circulating systems. Some secondary hot
water circulation systems are used intermittently, controlled by time
and/or temperature thermostats. This application is also unsuitable for
products manufactured to BS 7291.
Re-cycled rainwater systems
Polypipe products can be used in systems conveying re-cycled
or harvested rainwater within domestic properties. All pipe work used
in this type of system should be clearly identifiable and this should be
carried out in accordance with WRAS Information and Guidance Note
No 9-02-05; Marking and Identification of Pipework for Reclaimed
(Greywater) Systems. If self adhesive labels are to be used, these should
not be applied directly to the pipe.
90
www.polypipe.com
The use of corrosion inhibitor in central heating systems is acceptable
provided that the inhibitor is specifically designed for plastic piping systems
and guidance on their suitability should be sought from the inhibitor
manufacturer prior to adding to the system.
Electrical Safety / Equipotential Bonding
Where Polypipe pipes break the continuity of existing metal pipe,
which may be used for earthing, or bonding this continuity must be
re-instated by affixing permanent earth clips and a section of earth
cable between the copper ends on either side of the plastic sections.
Both the IEE and the Chartered Institute of Plumbing and Heating
Engineers now give guidance on the Earth Bonding requirements of
Plastic Pipe systems. As plastic pipes do not conduct electricity,
installations generally require less equipotential bonding than metal
systems although if in doubt exact guidance should be sought.
Light
Polypipe Plumbing and Heating Systems should be protected from
UV light. Standard decorating paints form adequate protection.
Pipe insulation forms adequate protection for external use.
Polypipe products are delivered in light protective packaging.
Compatibility with other substances
For details of compatibility with building and cleaning substances,
and treatments (e.g. filler foam and wood worm treatments) please
consult the relevant manufacturers to confirm suitability with Polybutylene.
Polypipe Plumbing and Heating Systems pipes and fittings can be painted
using emulsion or undercoat and gloss. Cellulose based paints,
strippers or thinners must not be used.
Vermin
There is no evidence to suggest that Polypipe Plumbing and Heating
Systems attract vermin. Where vermin are present they can cause damage
to other services, building fabric and pipes and fittings, and therefore
a qualified pest controller should be employed to remove vermin from
the affected area.
www.polypipe.com
91
Gas, oil, and compressed air
However Polypipe Plumbing and Heating Systems are not suitable for
systems in which any further additives are ever added, periodically added,
or regularly dosed in to or additional to the normal UK mains water supply,
for example chlorine for swimming pools or those used for bacteria
control or legionella prevention. Systems must not be flushed through
with anything other than water from the normal UK mains water supply
or a cleaning product at the correct concentration that is specifically
recommended for plastic piping systems.
Connections to other equipment
Boilers and appliances:
All boilers and appliances must have safety devices such as thermostatic
controls, cut-outs and pump over-run protection to make sure that
they cannot operate above the Class S working temperature and
pressure limits set out in the table of Class S service conditions above.
Exposure to conditions in excess of those specified could result in failure
of the pipes or fittings with the potential for serious injury.
Gas Boilers:
Pipe should only be connected to gas boilers where the pipe connection
is outside the boiler casing and where the boiler incorporates a high limit
thermostat and pump over-run facility. The pipe connections should be
350mm from the heat source. In all other situations, a section of metal
pipe should be at least 1m in length. In addition for back boilers metal
pipe work should be used within the fire opening extending out of the
chimney brickwork.
Combination Boilers:
Where system connections are made to an incoming water supply pipe
from a water meter or any other device which contains a check valve
a suitable expansion vessel must be fitted to prevent the expansion
of heated water back down the supply pipe. This is especially important
where a water meter is fitted retrospectively.
Solid Fuel Boilers & Cooking Ranges
Pipes and fittings must not be used for primary or gravity circuits from
solid fuel boilers, cooking ranges or other uncontrolled heat sources.
Solar Panels / Systems
Pipes and fittings must not be used for connection of solar panels
or any part of solar distribution that operates above the Class S working
temperature and pressure limits set out in the table of Class S service
conditions above.
Oil Fired Boilers
Open Vented Central Heating Systems:
The use of plastic pipe and fittings is acceptable when used in oil fired
installations where the boiler is connected to an open vented system,
however the first metre of primary pipework from the boiler connections
must be installed using metal pipe. The boiler must be suitable for this
type of application and all relevant safety features as supplied and fitted
to the boiler must be checked for correct operation. The system must also
be commissioned in accordance with the boiler manufacturers instructions.
Plastic pipe and fittings can also be used in the hot and cold water and
underfloor central heating systems with the exception of continuously
operated re-circulating systems (see page 80) where plastic pipe and
fittings should not be used.
For further information regarding the suitable applications for our plastic
pipe and fittings please refer to the Class S Service Conditions table
as shown on page 80 of this publication.
Sealed Central Heating Systems:
Where a sealed system oil fired boiler is to be used all primary boiler
pipework to and from the hot water cylinder (if fitted) and any radiator
or towel rail circuits must be installed using metal pipe and fittings.
Plastic pipes can be used on underfloor central heating systems where
the plastic pipes are fitted after the UFCH control unit and manifold
arrangement which must contain a correctly operating thermostatic
mixing valve.
Plastic pipe and fittings can also be used in the hot and cold water system
with the exception of continuously operated re-circulating systems
(see page 80) where plastic pipe and fittings should not be used.
All relevant safety features as supplied and fitted to the boiler such
as the boiler temperature control thermostat, high limit thermostat,
pump overrun facility and the pressure and temperature relief valve must
be checked for correct operation at both installation stage and at any
subsequent boiler service intervals. The system must also be commissioned
in accordance with the boiler manufacturers instructions.
92
www.polypipe.com
www.polypipe.com
93
For further information regarding the suitable applications for our plastic
pipe and fittings please refer to the Class S Service Conditions table as
shown on page 80 of this publication.
Use of aluminium tape
To comply with the NHBC guidelines regarding detection of pipes in wall
cavities Polypipe recommends the use of aluminium tape. This tape should
be applied directly to the wall sub-structure and pipes should be clipped
on top of the tape. The tape must not be applied directly to the pipes.
“Dot and dab” walling
Dry lined or “dot and dab” walls are commonly used to speed up the
build process and Polypipe systems are compatible with these types of
constructions. Board adhesive or plaster should not be applied to Polypipe
pipe and fittings especially around the area where the pipes pass through
the wall to feed radiators and appliances. Pipes and fittings must remain
accessible should future maintenance be required.
Handling and storage of products
Pressure testing in sub zero temperatures
Special precautions are necessary if the pressure testing
is to take place in sub-zero temperatures.
This applies particularly in underfloor central heating systems using the
screeded floor system where most of the pipe is encased in concrete.
Due to the contact between pipe and floor panel on screeded
installations, where the screed does not completely surround the pipe,
there may be points where strain is created on the pipe in freezing
conditions which is not normally present.
Therefore it is advisable to drain the under floor central heating system
once testing and screeding has been completed.
Precautions should also be taken where installations contain large
quantities of fittings which due to the rigidity of their construction
may put undue pressure on the pipe.
The packaging of both pipes and fittings is designed to protect from
ultraviolet light and environmental contamination. Pipes and fittings
should therefore be retained in their packaging as long as possible,
and should be stored in a cool dry area.
When on site, fittings should be stored to prevent dust and debris from
entering the fitting and sticking to the pre-lubricated ‘O’ ring. Care should
be taken to avoid scratching the pipe surface during the handling,
storage and installation processes.
Insulation of pipework
If pipe and fittings are installed in an environment that is not heated
or alternatively outside, they should be protected from potential frost
damage in accordance with BS6700 and BS5422.
System testing
Pressure testing of the pipe system is essential however a successful
pressure test using the following steps is not a guarantee of complete
and correct installation and only ensures that pipes have been inserted
into fittings passed both the ‘O’ ring and the grab ring. If pipes have been
scored or scratched during the installation process a high pressure test
as below may not highlight these issues.
1st fix Installations
Step 1:
Pipe and fittings only should be tested. The system should be filled
completely using water not more than 20°C at a test pressure of 18 bar
which should be applied for not less than 15 minutes and no longer than
1 hour. Joint security can be checked visually and by tugging at joints.
2nd fix Installations
Complete installations including appliances should be tested with water
to the maximum pressure allowed by the manufacturers of the appliances
and fittings. Please note, due to health and safety reasons pipework
installations must not be air tested.
94
www.polypipe.com
www.polypipe.com
95
Step 2:
Polypipe
Plumbing & Heating
Trade Price List
Polypipe Ulster
Dromore Rd, Lurgan Craigavon, Co. Armagh, BT66 7HL, UK
T: +44 28 38 881270
F: +44 28 38 882344
Polypipe Building Products
2410 London Road, Mount Vernon, Glasgow, G32 8 XZ, UK
T: +44 141 778 8822
F: +44 141 778 2703
Polypipe Building Products
Broomhouse Lane, Edlington, Doncaster, DN12 1ES, UK
T: +44 1709 770000
F: +44 1709 770001

Underfloor Heating Prices 2014 - Claygate Distribution Limited

Transcription

Similar documents

Polypipe Plastic Plumbing