2006 Tool Catalog - Pace International

Customer Driven Distribution
Tools Catalog
www.pacemso.com
Vendor List
1.800.444.7223
www.pacemso.com
Rochester, MN
507.288.1853
Minneapolis, MN
763.542.9620
Pensacola, FL
850.474.3900
About Pace
Pace Electronics has emerged as a
leading Value Added Reseller within
the Satellite and Low Voltage products
installation market. Here at Pace our
focus is Customer Driven Distribution,
which means that your focus becomes
our focus. We have the products, expertise and capabilities to provide
solutions to help your business grow. Pace supports customers both large
and small with product sourcing, technical support and providing the
right tools for the job whether you work in the satellite, security, system
integration or home theater industries. Pace is also your approved source
for MDU Programming and the associated hardware items including;
receivers, dishes, distribution equipment and installation supplies.
Contact a Pace location today and find out what we can offer your
business.
Pace Mission Statement:
Leading, simplifying and supporting the integration of hardware and
content solutions within a complex communications marketplace.
www.pacemso.com
Prices and promotions are subject to change without notice. Pace Electronics is not responsible for errors or
omissions. Product may vary from the product pictured. Certain products may not be available at all warehouse
locations. Products may also be subject to back order. Pace Electronics can discontinue any offers it gives without
notice. © Pace Electronics All Rights Reserved.
Request Our
Full Product
Catalog
T
o request a Free Full Line
Catalog, log on to our
website at www.pacemso.com.
In the upper right-hand corner,
in the blue bar below the main
navigation, is a link to "Request
a Catalog." Click that link to fill out a request form and recieve
a copy of our full Catalog for Free! If you prefer an electronic
version, click on "Download 2006 Catalog" instead.
F
or years you’ve known Pace as a distributor of industry leading satellite distribution products. Today Pace is very excited
to take the wraps off of our extensive lines of hardware and tools
from the most recognized manufacturers in the business. Names
like; DeWalt, Makita, Hilti, Stanley, Werner, Triplett, BES, Bosch, Arrow, Irwin, Platinum Tools and more.
For the past several years Pace has been an integrator to some
of the largest service companies in the business and now is your
chance to capitalize on our buying power to outfit your service
trucks. From one truck to 1,000, Pace can source, kit and ship all of
the tools that your technicians need to service your customers today and tomorrow with tools of the highest quality and reputation.
Contents
Hand Tools
2-11
Power Tools
12-16
Bits & Blades
17-21
Fishing Tools
22-24
Wire Management
25-27
Work Lights & Ladders
28-29
Sealant
30
Safety
31-33
Test Equipment
34-37
Bolts & Fasteners
38-39
8" Long Nose Pliers
$ 8.10
HB01001-8
• Lifetime warranty
Aluminum Close Quarter
Hack Saw with 10" Blade
6" Dry Wall Utility Saw
Adjustable Wrench
• Lifetime warranty
$ 7.16
HB01106-G
• Lifetime warranty
HB02008-10
10"
$ 11.58
HB02008-8
8"
$ 8.60
•
•
•
•
Tradewind 10" adjustable wrench
Dipped handle for added comfort.
Commercial grade tool
Full lifetime warranty.
$ 10.50
1.800.444.7223
• Lifetime warranty
• Lifetime Warranty
$ 7.57
HB01126
•
•
•
•
Multi Purpose Tin Snips
2
$ 4.43
Level/Template
Tool
TCLSR
$ 11.34
10" Groove Joint Pliers
$ 7.66
HB01093
Irwin Straight-Line
Plumb Bob
20877
HB06003
8" Lineman Pliers
securly in place when measuring!
• Lists out the 1/8th" markings to make
measurements quicker and more
accurate.
$ 2.95
TCWBC
16 oz. Claw Hammer Fiber
Handle
HB01004
$ 12.00
• Magnet in the end of the tape to hold it
HB02008-8
$ 7.90
4" Long Nose Pliers
$ 12.00
25 ft. Carpenters Tape Measure
$ 4.84 TCTM25
TCMSA
6" Long Nose Pliers
HB01001-6
PROTAPE
• Heavy duty tool capable of standing
up to the toughest cable
• Lifetime warranty
HB02008-10
• HAND TOOLS •
$ 4.20
TCSCF
$ 10.25
Tradewind 10” Grove Joint Pliers
Cushioned grips for added comfort
Full Lifetime Warranty
Fine Polished Chromium Nickel
finish
2 Foot Scaled Level
TCLEL24
$ 4.00
HB06006
Compass With
Lanyard
TCCPM
13" Pry Bar
TCPB13
Lifetime Warranty
$ 7.10
$ 3.69
• Light weight and durable
16 oz. Rubber Mallet
$ 4.99
www.pacemso.com
$ 9.83
HB01071
30 ft. Carpenters Tape Measure
• HAND TOOLS •
10" Round Cable Cutter
12" Hacksaw Frame with
Blade
1.800.444.7223
www.pacemso.com
Hand Tools:
9" Torpedo Level
TCTL9
• Light weight and durable
• Magnetic side
$ 1.65
3
• 8mm - 18mm
• These unique
wrenches require only
5 degree of swing to
loosen or tighten nuts and bolts
• HAND TOOLS •
Crescent 7 Piece
Ratcheting SAE
Wrench Set
RWS
$ 63.00
• 5/16" - 3 /4"
• These unique
wrenches require
only 5 degree of
swing to loosen or tighten nuts and
bolts
1.800.444.7223
SCKTSET
Mechanical Tool Chest
• Clark 3 Drawer Tool Chest
• Mechanics tool chest for safe and
secure tool storage.
• All steel construction.
• Tough powder coat finish
• One piece roll formed drawer
runners.
• Lockable top patches.
• Strong carry handle in lid.
20 Piece Screw
Driver Set
$ 19.60
$ 46.50 TCHR13
• Both SAE & Metric Sizes
• ¼" & 3 / 8" Drives
• 72 tooth ratchets require only 5
degrees of swing
$ 11.25
$ 115.00
• Rigid Brand PVC Pipe Cutter
• 1¼” to 3½” Plastic Pipe Cutter
• Features 37 pockets - 35 outside and
2 inside
• Double 11" x 16" multi-compartment
plastic trays slide securely into
bottom of bag
• Opens wide for easy access to bag's
contents
• Pockets for cordless drill, cell phone,
2-way radio, drill bits, tips etc.
• Bag dimensions: 24"L x 9"W x 12"H
This heavy duty 12 pocket tool belt is
sturdy and durable yet light weight. The
roomy pockets have enough space to
carry the tools and supplies you need
on the job. Two hooks are included for
hammers and one of the hooks swivels.
There are pockets for your punches and
screwdrivers as well as utility knives,
nails, clips and fasteners.
Stanley 3 Piece
Wood Chisel Set
Pick and Hook Set
TC2SS
Lifetime Warranty
0082
3
/ 32"
$ 6.00
/ 8"
$ 6.20
1
$ 4.66
$ 9.40
2107738
$ 2.35
• ½" - ¾" - 1"
• Hardened for
sharpening
154
A-7
This is a heavy duty set of hex keys in
the following sizes:
1
/ 20”, 1/16”, 5/ 64”, 3 / 32”, 7/ 64”, 1/ 8”, 9 / 64”,
5
/ 32”, 3 /16”, 7/ 32”, 1/4”, 5/16”, 3 / 8” as well
as 1.5, 2, 2.5, 3,4, 5, 6, 8, 10 mm.
• Lifetime warranty
66-039
$ 18.95
1429
$ 49.95
1141
0079
6 Piece Screw
Driver Set
153-P
24" Double Traytote Bag
Nail Punch Set
22 Piece
Hex Key Set
PVC Pipe Cutter
4
$ 32.38
TCHEST
60-220
Crescent 70 Piece
Professional Tool
12 Pocket Tool Belt
Mechanical Tool Chest
Cold Chisel
A-7
¾" wide
$ 3.75
Carpet Chisel
154
3 Piece File Set
16070
$ 30.00
Legendary German quality in this
8” hand file set. This 3 piece file set
includes Bastard Cut and Second Cut
files with comfortable plastic handles
for long lasting reliability and ease of
use.
www.pacemso.com
$ 63.00
• HAND TOOLS •
RWM
2¾" wide
$ 17.69
• This wide and heavy carpet chisel is
ideal for routing wires into the gap
between base board molding and
the carpet. Blunt edges will help
protect base board finishes.
• This is a handy device to make
hiding cables an easier task.
1.800.444.7223
www.pacemso.com
Crescent 7 Piece
Ratcheting Metric
Wrench Set
5
$ 8.35
TW-10FR
This tool makes it easy to tighten or
loosen F connectors in tight working
spaces. The extra long length is
excellent for those hard to reach
connectors.
1.800.444.7223
• HAND TOOLS •
TW-CT
$ 25.00
• This is a heavy duty compression
tool and works on all PPC and SnapN-Seal F compression connectors.
• Crimps F connectors with ease
Observation Mirror
TCOM
Lifetime Warranty
$ 4.80
• 1 quart - quick-drying
vinyl spackling paste
Platinum Tools Adjustable
Punch Down Tool
13006
$ 47.00
• The primary tool for all telecom and
data communications installers.
• Simultaneously seats and trims wire
in 110 and 66 style cross connects.
• Spring loaded for fast low effort wire
seating and termination.
• Bayonet style blade retention
mechanism is compatible with tools
and blades manufactured by Harris,
Ideal, and others.
• Adjustable low and high impact
force settings.
• Spare blade storage compartment in
the handle.
Platinum Tools 66 Style
Punch Down Blade
13001
Platinum Tools RJ45 Crimp Tool
100004
$ 59.99
This high quality crimp tool is designed
to quickly crimp and cut the wires of the
EZ-RJ45® Connector in one easy simple
operation! The ratcheted straight action
crimping motion ensures a uniform
crimp every cycle. Features precision cast
crimping dies for superior accuracy. Built
in wire cutter and stripper for silver satin.
All steel frame with rust resistant black
oxide finish.
Modular Crimper Tool
TCRJ45T
$ 13.95
$ 19.95
• 6 x 6 / 8 x 8 modular crimper tool
• Cuts, strips, and crimps
• Dual modular crimping tool
$ .55
• Through holes allow wire pairs to be
inserted through front of connector.
• Works with solid or stranded wire.
• Simple one piece design... no bars or
liners.
• FCC compliant, UL rated.
• Use in category 3, 5, 5E compliant
data networks.
• EZ to verify wire sequence.
• Faster terminations
Application
• Use in category 3, 5, 5E data
networks
• Use in category 3, 5, 5E patch cords
• Use the EZ-RJ45® Cat 6+ connectors
to meet category 6 performance
standards
$ .95
TCPK24
• These are nice, tough, quality yet
economical and disposable putty
knives
Newborn Brand EZ-Thrust
Caulking Gun
$ 7.25
0111
• Ideal for latex, silicone,
adhesive, rubber compound and
polyurethanes
• EZ-Thrust mechanism
• Spout cutter
• Seal puncture tool
• Thumb release stops caulk flow
Platinum Tools EZ-RJ45®
Connector
100003
2½" & 4" Dry
Wall Knives
Stainless Steel Leatherman Tool
BLAST
•
•
•
•
$ 51.35
15 tools in one
Needle nose/regular pliers
Leather Case
Wire cutter, Hard-wire cutter, Clip
point knife, Saw, Wood/metal file,
Scissors, Large and small screw
drivers, Phillips screwdriver,
Ruler - 8" (19cm), Bottle & can opener,
Wire stripper and lanyard ring
Assorted Color
Electrical Tape
3013760
www.pacemso.com
• Made for high density or hard to
reach places
$ 6.29
• HAND TOOLS •
33-3085
10" F-Connector Removal
$ 4.78 Tool
F Connector Compression
Tool
6
18768
7" F-Connector Removal Tool
1.800.444.7223
www.pacemso.com
Spackling Paste
5 rolls
$ 7.08
• White, orange, red, green and blue
7
$ Call for Pricing
338643
CF12
$ Call for Pricing
Large Maglite Flashlight
$ 18.55
MAGLITE1
• Large machined aluminum Maglite
• 2-Cell D batteries
80120
Hilti Foam Cleaner Case
CC12
$ Call for Pricing
• Clean up mis-sprays made
by spray foam
Small Maglite
Flashlight with Case
$ 12.77
95150
Brazing Rod .125
$ 42.00
Brazing Rod .062 DIA x 20 x 1#
95164
9 Volt Alkaline Battery
32116
$ 3.45
Hilti 15" Foam Dispensing Gun
•
•
•
•
$ 42.00
Size .125" x .050' x 20" X 1#
Silfos 15 lbs.
Flow Pt. Temp. 1300F
Liquidous 1475F
$ Call for Pricing
Small Silver Sharpie
SAN-39100
313187
$ 25.00
The Cold Heat tool’s patented technology
creates the heat you need to solder within
seconds, and its cordless design lets you
operate it anywhere for light-duty soldering projects. When the tip’s two electrodes
make simultaneous contact with an electrically conductive material such as the work
piece (wire lead, terminal, solder, PCB pad,
or other material) this circuit is completed
and the high resistance electrodes generate
instantaneous heat at the tip.
95150
• Includes 2 AA Batteries &
Holster
259768
CHSG
$ 4.50
• Coleman Propane Fuel
Tank
• 16.4 oz/465 g (1.02 lbs.)
• Recommended for all Coleman
propane appliances.
• Convenient propane cylinder
• Made in the U.S.A.
$ 4.50
MAGCLIP
$ 1.35
$ Call for Pricing
• Extra long spray foam dispenser for
those hard to reach applications
Zircon TriScanner Pro
Wall Scanner
TSPSL
Hilti 27" Spray Foam Gun
8
Replacement Propane
Tank
Maglite Clip
MAGLITE2
1.800.444.7223
The Propane Torch Kit is ideal for:
• Soldering Copper Pipes up to ¾"
thick
• Thawing frozen pipes & locks
• Loosening rusted bolts
• Includes self igniting adjustable
torch head
• 14 oz propane tank
Includes:
• Foam dispensing gun & carrying
case
• 3 cans of spray foam
• 1 can of cleaner
Hilti Spray Insulation
Foam
$ 34.50 Cold Heat Solder Tool
23656
Large Black Sharpie
N2PTLG11-BLACK
$ 1.20
www.pacemso.com
Hilti Foam Spray Insulation Kit
• Protects Hilti 15" foam gun,
compressed foam, & cleaner
canisters
• HAND TOOLS •
$ Call for Pricing
311111
BernzOmatic Self-Igniting,
Adjustable Torch Kit
1.800.444.7223
www.pacemso.com
• HAND TOOLS •
Carry Case for Hilti Foam Gun
•
•
•
•
$ 23.75 .062" x 20" FosFlo
Deep scan to 1½" deep
Detects wood and metal studs
AC wire warning
Spotlight pointing system
95013
$ 10.00
• 1 lb. tube of .062” x 20” alloy brazing
rod
9
• HAND TOOLS •
1.800.444.7223
10
Furniture Pad/All Weather
Utility Pad
401-4852
Forearm Forklift
$ 115.00
7107493
• Runs off of DeWalt battery packs
(12V-18V) or 120V AC
• High efficiency, washable filter
traps 99.7% of dust as small as 0.3
microns
• Heavy duty rubber hose
• 2 gallon (7.5 liters) tank
• Drain port
• Blower
• On board storage for hose, cord,
crevice tool and wide nozzle
$ 33.01
• Leverage lifting straps which
virtually make the items you carry
seem lighter
• No more scratching wood floors
with dolly casters.
• These straps also encourage proper
lifting techniques
• Stabilizes furniture which reduces
chances of colliding with walls and
door jams
Dust Pan and Brush
TCDP
CSBSCWPDB
• Large shop dust pan with nylon
brush
• For quick & easy clean up
SDOLLY
•
•
•
•
•
•
•
•
•
•
•
$ 84.88
Extra long 18' lock-on hose system
2 extension wands
Crevice tool
Gulper nozzle
Round brush
12" deluxe nozzle
12" squeegee insert
12" brush insert
Cartridge filter
Tool holder
Wall mounting bracket
Nylon Brush
TCBRUSH
$ 3.50
• Perfect for quick clean ups
• Not recommended for comb-overs
$ 157.90
• One size fits all shoe covers
Shoulder Dolly
952-02-62
Work boots were made to be scuffed, not
your customers floors. A furniture pad
makes a great surface for your tool box
and other tools when working in a clients
home.
• This furniture pad measures a
generous 6 feet by 8 feet.
300 Shoe Covers
$ 10.70
Shop Vac 4.5hp Wet Dry Vac
$ 11.50
www.pacemso.com
• Constructed with highest
quality
• 100% Natural broom corn
• Handcrafted for durability
• 5 sews for light to heavy
debris
Heavy Duty 2 Gallon Cordless/
Corded Wet/Dry Vacuum
DC500
$ 19.00
• HAND TOOLS •
10523
$ 49.38
The Shoulder Dolly® is a revolutionary
piece of moving equipment that works
using leverage. Rather than bending
over to pick up an object from the
bottom to get a good hand hold, the
Shoulder Dolly® Light Duty™ lifting
system allows you to lift in an upright
position. The larger shoulder and leg
muscles lift the weight significantly
decreasing strain to the lower back,
hand and arms.
Don't see what
your looking
for?
Give our expert
sales staff a call
1.800.444.7223
www.pacemso.com
Large Utility Broom
1.800.444.7223
11
Compact size & weight, only 3.0 lbs.
Adjustable two-position handle
¼” hex-drive quick release chuck
VSR: 0-500 RPM
Extended life switch and electric brake
Adjustable clutch torque control.
Kit includes: DW920 screwdriver, charger,
(2) batteries, screwdriver bits and kit box.
$ Call for Pricing
DW4KIT-2
• Heavy duty XRP ½" 18V Cordless Hammer Drill
• Heavy duty XRP 18V Cordless Reciprocating Saw with
keyless blade clamp
• Heavy duty XRP 6½" 18V Cordless Circular Saw
• Heavy duty 18V Flexible Floodlight
• 2 Batteries, 1 hour charger and kit box
DeWalt 18 Volt Hammer Drill/Driver
Kit
DC988
• POWER TOOLS •
DeWalt 18V Cordless Reciprocating Saw and Cordless Drill Kit
DC987 18 Volt Cordless ½" Drill/Driver:
• High torque motor: 500 in-lbs maximum
torque
• 3-Speed transmission
• ½" Metal ratcheting chuck with carbide Jaws.
DC385 18 Volt Cordless Reciprocating Saw
• Keyless blade clamp.
• 0-2,900 spm
• 1" stroke length
• Lever action keyless blade clamp
• Electric brake for greater control
Includes: Drill, Saw, 2 XRP Batteries, 1 Hour
charger, Screwdriver bit, Blade,
side handle and carrying case.
1.800.444.7223
DeWalt Heavy Duty ½" 18 Volt
Cordless Compact Drill/Driver Kit
12
•
•
•
•
•
•
$ Call for Pricing
DC987KA
DC759KA
$ Call for Pricing
DeWalt built high torque motor
(2) XRP extended run time batteries
Exclusive 3-speed transmission
½” ratcheting carbide jaw chuck
Maximum job site durability and reliability
Includes: driver, 1 hour charger, 2 XRP batteries,
double sided screwdriver bit, side handle and
carrying case.
DeWalt 3/8” 18 Volt Right Angle Drill/
Driver Kit
$ Call for Pricing
DW960K-2
• Dual range VSR 0-500 RPM / 0-1500 RPM, 4.7 lbs.
• 3 / 8” keyless ratcheting chuck
• Multi-position rubber coated paddle switch
• Fan cooled motor with electric brake
• (2) High capacity XRP Batteries, extended run-time
batteries
• Kit Includes: DW960 right angle drill/driver, 1 hour
charger (input voltage 120VAC, 60Hz, 2.0 amps), (2)
batteries, screwdriver bit and kit box.
$ Call for Pricing
• Kit Includes: Drill/Driver, 1 Hour Charger,
(2) 18 Volt Battery Packs, Double Ended
Screwdriver Bit and Kit Box.
• Compact size fits into the tightest
conditions.
• Lightweight 5.2 lbs., minimizes user
fatigue
• High performance motor delivers 450 inch-pounds of maximum torque.
• Dual speed range for optimal performance: 0-450/0-1,500 RPM
• ½" single sleeve ratcheting chuck for tighter Bit grip
• Maximum durability and reliability to withstand job-site conditions.
• This tool complies with OSHA standards
DeWalt Heavy Duty ½ (13 mm) Reversible
Right Angle Drill Kit
DW120K
•
•
•
•
•
www.pacemso.com
•
•
•
•
•
•
•
DeWalt 18 Volt 4-Tool Combo Kit
$ Call for Pricing
120VAC, 7.0 Amps
3 Speed 400/600/900 rpm, 9.75 lbs.
100% ball and roller bearings
5 position side handle
Includes: DW120 Drill, chuck key, chuck key holder and
kit box.
• POWER TOOLS •
$ Call for Pricing
DW920K-2
1.800.444.7223
www.pacemso.com
DeWalt Heavy Duty 7.2 Volt Cordless Screwdriver Kit
13
$ Call for Pricing
• The perfect companion for charging batteries on site.
DeWalt Heavy Duty XRP 18V Battery
DC9096
$ Call for Pricing
Hitachi 7¼” commercial grade circular saw
Will do 0 to 90 degree cuts.
Extra heavy duty cord.
This circular saw has numerous extra
features, easy alignment for accurate cutting
and built in rule on saw guide.
• This is definitely not a tool that you are going
to find at your local hardware store. Step up to
professional commercial grade Hitachi tools.
• Includes a roomy carry case.
Makita Heavy Duty ½ (13mm) Right
Angle Drill
1.800.444.7223
• POWER TOOLS •
• Fits all DeWalt 18 Volt cordless products
14
$ Call for Pricing
•
•
•
•
DA400LR
•
•
•
•
•
•
DeWalt Heavy Duty Electrician's Hole Saw Kit
$ Call for Pricing
D180002
• 8 piece bi-metal hole saw kit
• ¼", 7/16", 7/ 8", 11/ 8", 13 / 8", 1¾", 2", 2½"
$ Call for Pricing
Variable Speed
Reversing Switch
Auxiliary Handle (side grip)
Use With or Without the Angle Attachment
High and Low speed drilling capability
Molded carrying case
BOSCH 18 Volt Drill/Hammer Kit
13618-SE
•
•
•
•
•
•
•
•
•
•
DeWalt Corded Heavy Duty ½" Single
Speed Hammer Drill
DW511
$ Call for Pricing
Heavy Duty Outdoor Extension Cord
CEP-1202
25'
$ 21.00
CEP-1205
50'
$ 35.00
•
•
•
•
•
•
Power Flex outdoor extension cord
Moisture resistant molded connectors
Molded 3-wire male plug
Meets OSHA requirements
UL/CUL listed
Designed for rugged outdoor use.
$ Call for Pricing
(2) 18 volt batteries
1 hour charger
Keyless chuck
Adjustable clutch
Variable speed trigger switch
Forward/Reverse
Rubberized grip
Tether hook
Side handle
Extra large soft sided case with 22 pockets.
BOSCH Variable Speed Jig Saw
1584VS
$ Call for Pricing
• BOSCH barrel grip jig saw kit
• 5.0 Amps 500-3,100 SPM
• Tool-less blade change system makes for fast
and easy blade changes.
• Low-vibration design - extremely smooth
operation.
• 4-stage orbital action - adjusts blade motion
to match workplace and task
• Variable speed control
• Rotating handle
• 3-position dust blower
• Low position roller guide
• POWER TOOLS •
DW9109
C75B
www.pacemso.com
DeWalt 7.2V - 18V 1-hour Vehicle Charger
1.800.444.7223
www.pacemso.com
Hitachi 7¼” Circular Saw
15
• Performance: Fasteners up to 72mm
into concrete and steel
• Weight: 2.0 Kg
• Complies with OSHA regulations
• Will attach a fastener to either
concrete or steel.
• Rated power: 600 W
• Rated voltage: 120 V
• Minimum Distance between wall and
hole drilled: 1.2”
• Hammering speed:
• Precision hammering action: 0-2400
blows/min
• Full hammering action: 0-4600
blows/min
• Includes, case, drill guide, lubricant
GBOOST
GBOOST
Green (level 3)
$ 11.00
YBOOST
Yellow (level 4)
$ 11.00
Premium Smooth Shank
Masonry Drill Bit
• / 8" through 1½"
• With case
/16" x 4"
$ 4.00
10216
¼" x 4"
$ 4.20
10217
¼" x 6"
$ 4.60
/16" x 6"
$ 4.80
$ 5.00 88706
$ 5.20 88708
10212
3
10221
5
10255
3
/ 8" x 6"
10232
1
/ 2" x 6"
34-355
pack of 100
$ 12.50
• For use with the Hilti Power Nailer
Irwin Long Bits
88710
/ 8" 16"
$ 5.47
½" x 16"
$ 5.75
/ 8" 16"
$ 6.10
3
5
Irwin Long Quick Change Bit
Call for Pricing
• Includes dry diamond cut off wheel
for tile
• Wrench-less bit change
• LED work light
• Dust sealed switch
• Soft sided carry case
$ 20.14
341008
3
RotoZip Cut Off Kit
Hilti 42mm Pins
1.800.444.7223
10221
100 Pack of Cartridges for the
DX-72 Power Nailer
RZ20-2100
90106
6"
$ 6.75
90112
12"
$ 7.51
$ 19.55 Irwin Unibit ¼" - ¾"
$ 23.32 59003
$ 42.25
Hilti Masonry Drill Bits
SDS3/16
SDS1/4
/16" × 6"
$ Call for Pricing
¼" × 6"
$ Call for Pricing
/16" × 6"
$ Call for Pricing
/ 8" × 6"
$ Call for Pricing
3
SDS5/16
5
SDS3/8
3
1 RotoZip Duracut ¼" Bit for Cement
$ 8.70
RZ250
5 RotoZip Sabrecut /8" Bits
for Wood and Plastic Siding
1
SC5
$ 5.65
Irwin Auger Bits
10 RotoZip Guidepoints 1/8" Bits for Dry Wall
47412
¾" X 17“
$ 6.75
47416
1" x 17"
GP10
16
10217
www.pacemso.com
$ Call for Pricing
TE-2
10212
• BITS & BLADES •
$ Call for Pricing
DX-72
Irwin 8 Piece Spade Bit set
Hilti Rotary Hammer
1.800.444.7223
www.pacemso.com
• POWER TOOLS •
Hilti Powder Actuated Power
Nailer
17
03803
3
03805
½" × 18"
03807
5
/ 8" × 18"
03809
3
/4" × 18"
03811
7
/ 8" × 18"
/ 8" × 18"
1.800.444.7223
/ 8" × 6"
$ 8.30
03705
½" × 6"
$ 8.37
5
/ 8" × 6"
$ 8.40
3
/4" × 6"
$ 9.00
/ 8" × 6"
$ 10.25
B.E.S. High Speed Steel
Flex Bits
1" × 6"
$ 11.50
FLX1224
½" x 24"
$ 17.30
11/ 8" × 6"
$ 14.20
FLX3836
3
/ 8" x 36"
$ 13.50
11/4" × 6"
$ 15.40
FLX3872
3
/ 8" x 72"
$ 17.50
13 / 8" × 6"
$ 16.95
1½" × 6"
$ 18.25
$ 20.70 03711
$ 23.05 03713
$ 25.60 03715
$ 27.30 03717
1" × 18"
03815
11/ 8" × 18"
03817
11/4" × 18"
03818
13 / 8" × 18"
$ 43.75
03819
1 / 2" × 18"
$ 46.00
$ 33.25 03718
$ 38.15 03719
7
FLX1224
FLX3872
$ 15.40
BRD1224
FP159-6
$ 16.25
• After drilling a hole through a board,
strengthen the area with a Simpson
nail plate.
B.E.S. Tru-Point-Brad Point
Flex Bit
Forstner Drill Bit Kit
FBS1016
$ 50.00
• Hickory Woodworking™
• 16 piece Forstner bit set. sizes ¼"
through 21/ 8" in 1/ 8" increments.
• Industrial quality - tools fully
hardened
• Use in hand tools or drill presses.
• Use to make: flat bottomed holes,
counter bored screws, decorative
edges, pocket holes, pilot holes.
48-25-2001
2"
$ 40.00
48-25-2561
29 /16"
$ 40.00
• Fits ½" Drill Chuck
BRD1224
½" × 24"
$ 28.60
BRD3824
3
/ 8" × 24"
$ 19.20
BRD3848
3
/ 8" × 48"
$ 19.90
FIBEX72
3
/8" x 12" Steel Bit
SF3812
$ 14.99
½" × 48"
$ 16.96
FIB3448
3
/4" x 48"
$ 22.25
FIB1254
½" × 54"
$ 17.57
FIB3454
3
/4" x 54"
$ 22.05
FIB1272
½" × 72"
$ 18.40
FIB5872
5
/ 8" x 72"
$ 19.00
FLM3818
/16" x 18"
$ 13.50
/ 8" x 18"
$ 15.00
FLM1248
½" x 48"
$ 18.35
FLM1254
½" x 54"
$ 18.72
FLM1272
½" x 72"
$ 19.29
FLM31618
3
FLM3818
3
FIBH34
B.E.S. 72" Flexible Extension
Wood Owl Self-Feed Wood Bit
FIB1248
B.E.S. Masonry Flexible
Drill Bits
BRD3848
FP159-3
$ 16.96
FLM1254
BRD3824
100 Nail
Plates 1 3/8" x 3"
18
3
$ 18.85 03707
$ 19.45 03709
03813
1
03703
½" × 36"
$ 17.10
FIBH58
B.E.S. Auger Flex Bit
with Replaceable Head
FIBH12
½"
$ 6.99
FIBH58
5
/ 8"
$ 7.64
FIBH34
3
/ 4"
$ 8.35
www.pacemso.com
• For fast cutting clean holes in wood
• For fast cutting clean holes in wood
FIB1236
• BITS & BLADES •
Wood Owl 18" Auger Bit
Tri-Cut Design
$ 35.40
48-13-8275
B.E.S. Auger Flex Bit
with Replaceable Head
1.800.444.7223
www.pacemso.com
• BITS & BLADES •
Wood Owl 6" Auger Bit Tri-Cut
Design
¾" × 54" Flexible Auger Mag
Bit
19
5 RotoZip Sabrecut /8" Bits
for Wood and Plastic Siding
1
10 RotoZip Guidepoints /8" Bits for Dry Wall
1
$ 6.75
GP10
Cobalt 21 Piece Drill Bit Set
with Indexed Steel Case
22-8376
$ 35.00
• Set includes: bits ranging from 1/16”
to 3/8” in increments of 1/64”
• 135º drill point
• Complete with indexed steel case
Hole Cutter with Dust Catcher
LC-1025
$ 83.00
Finally a economically priced hole
cutter that not only can cut a hole in
dry wall and wood from 1¼" up to 10",
but it also collects the dust for a clean
installation job.
Simply set the tool for the size hole that
you need, hook it up to your drill and
your ready to go.
DW9155
DW3578
DeWalt Carbide Blades for
DeWalt Circular Saws
DW9155
6½"
$ 15.27
DW3578
7¼"
$ 13.00
Aluminum Close Quarter
Hack Saw with 10" Blade
TCMSA
• Lightweight and easy to grip &
maneuver
6" DeWalt High Performance
Bi-Metal Reciprocating Saw
Blades.
DW4802
$ 2.20
Replacement reciprocating saw blade
for rough wood cutting
12” Hacksaw Frame with
Blade
TCSCF
Don't see what
your looking
for?
$ 9.75
Give our expert
sales staff a call
1.800.444.7223
$ 4.20
• This is a very good quality, heavy
duty hacksaw at a very attractive
price.
Hole Cutter
Replacement blades
for the Hole Cutter
LC-3
$ 4.84
• BITS & BLADES •
$ 5.65
SC5
www.pacemso.com
$ 8.70
RZ250
www.pacemso.com
25 Pack of 6" DeWalt High
Performance Bi-Metal
Reciprocating Saw Blades
DW4802-25
Two 12" Replacement Hacksaw
Blades
62826
$ 2.75
1.800.444.7223
www.pacemso.com
• BITS & BLADES •
1.800.444.7223
20
1 RotoZip Duracut ¼" Bit for Cement
$ 40.00
21
$ 82.31
•
•
•
•
•
•
• Non-conductive fiberglass rod
sections ¼" thick
• Rods can be screwed together to
make longer lengths for fishing wire
in existing walls and attics or across
drop ceilings
• With a variety of attachments
available that make wire fishing
easy!
$ 28.50
FIB519
$ 8.08
Directional Tool
Fish Hook
Tips
Pull Ring
Magnet Head
Ball Chain
B.E.S. 10' Fish Chain with
Magnetic Retriever
FIB223
$ 16.10
B.E.S. 6' - 15' Telescoping Pole
TPF615
B.E.S Flex Bit Steering Guide
Tool
FIBGUD
$ 16.00
• The Flex Bit Steering Guide is used
to guide flexible bits inside a finished
wall. This is a must have tool if you
are using flexible drill bits.
$ 83.80
• Telescopes to full length in seconds
• Easy to handle in tight spots
• Push or pull wires over long spans,
suspended ceilings, crawl spaces & attics
• Made of non-conductive fiberglass for
safety
• Innovative lever lock system locks
sections at any length
• Sturdy, durable, and lightweight at 5 lbs.
B.E.S. Glow Fish II Kit
GLF407
$ 72.60
• One 5 / 32" x 6' with Bullnose/Female
tip
• Four 5 / 32" x 4' with Male/Female tips
• Comes with case seen above
B.E.S. Wisp Head
B.E.S. Screw Tip for Glow Rods FIB522
FIB512
$ 9.75
$ 11.10
• For pulling wire across suspended
ceilings
B.E.S. Installation Kit
BBCON 300 KIT
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
$ 454.32
Carry Case
3' Bullnose Rod
Fish Chain and Retriever
Attachment kit
Wisp head
Glowfish set
Repair Kit
15' Telescoping pole with z-tip
36" wire bits
3
/ 8" x 36" high speed steel flex bit
3
/ 8" x 72" high speed steel flex bit
1
/ 2" x 24" high speed steel flex bit
3
/16 " x 72" extension
Flex Bit Steering Guide
Zircon Wall Scanner
B.E.S. 15' Fiberglass Fish Tape
FIBT15
$ 37.00
• The flexibility of fiberglass is
excellent for pulling wire through
tight spaces and around corners.
• WIRE FISHING TOOLS •
• WIRE FISHING TOOLS •
1.800.444.7223
22
FIB107
FIB520
$ 4.50
B.E.S. 25 Foot Carpet Fish Tape
UC25
1.800.444.7223
Universal Attachment Kit
B.E.S. 24' Fiber Fish Kit
GLF402
B.E.S. 12” Ball Chain With
Insert For Fish Rods
www.
www.
B.E.S. Glow Fish II Repair
Kit for 5/32" Rods
$ 45.00
• a heavy duty fish tape for running
under carpets.
• Thin, smooth design makes it a
breeze to use.
23
• WIRE FISHING TOOLS •
100 Universal Stud Insulators
22288
$ 20.00 Greenlee Nylon Fish Tape with
pack of 100
Case
• Fits all hole configurations
• Quick, snap-in design
• Prevents wire damage
436-5
3
/16" x 50'
$ 60.00
This economical tool has been
specifically designed to strip the
cable jackets from Category 5 and 5e
twisted pair cables. No adjustments
are required and will not nick the inner
conductors.
Tradewind RG6 and RG59
Cable Stripper
CS-596
www.
FTB-56I
RG6 (ivory)
FTB-59B
RG59 (black)
FTB-59I
RG59 (ivory)
1.800.444.7223
$ 1.99
$ 7.00
$ 1.99
$ 5.00
100 RG6 Dual Feed Thru
FTBD-56B
$ 6.95 FTBD-56I
Greenlee Steel Fish Tape with
$ 15.00 Case
• Pull wire easily and safely through
all types of conduit
• Greaseless, non-toxic
• Suitable for optic wire
438-5
1
/ 8 x 50'
RG-STRIPPER
black
ivory
$ 1.99
$ 1.99
$ 9.00
$ 30.12
100 Nail Clips for Single Coax
CC-6S
Don't see what your looking for?
Ripley RG6/59 RG6 Quad Cable CC-6S-W
Stripper
Give our expert sales staff a call
SDT596-250
1.800.444.7223
SDT-11-250
black
$ .40
white
$ .40
$ 22.00
Ripley RG11 Cable Stripper
$ 22.00
100 Nail Clips for Dual Coax
www.pacemso.com
24
RG6 (black)
Pro-Brand RG6/RG59
Cable Stripper
Wire Lube 1 Quart
22290
100 Feed Thru Bushings
$ 13.00 FTB-56B
• WIRE MANAGEMENT •
15015
Strip Tool for RG59, RG6 &
RGB Cable
PS/59/6/RGB
$ 23.00
CC-6D
black
$ .60
CC-6D-W
white
$ .60
1.800.444.7223
www.
Platinum Tools CAT5E Stripper
25
www.
www.
FC-D
Small Wire Tacker
1.800.444.7223
FC-S
black
FC-S-WH
white
50 Adhesive Backed Cable Tie
$ 4.99 Mounts
$ 4.99 ACMB11C
100 Fast Clips for Dual Coax
FC-D
black
$ 5.69
FC-D-WH
white
$ 5.69
$ 3.15
black
$3.65
•
• Patented jam proof mechanism
• Chrome finish resists wear and tear
• Grooved guide ensures perfect
stapling
• Shoots Insulated staples that will not
damage wire
591189-CL
1,000 Staples for the T18
T18S
$ 2.50 300 Staples for the T59 Stapler
591188
¼" (clear)
$ 5.29
PSG-100
$ 10.00
T25
500 Gardner Bender Wire
Staples
PS1752U
CT4-18COW
black
$ 1.35
CT4-18C9
white
$ 1.35
100 7" Cable Ties
CT7-50COW
$ 15.00 CT7-50C9
black
$ 1.65
white
$ 1.65
/16 (clear)
$ 5.40
591189-CL
5
• For RG-6 and other wire
• Loose Fit
• Special coating increases holding
power over 3 times
$ 45.00
• Professional Grade stapler that will
not damage wire
• All steel construction lasts and lasts
• Patented jam proof mechanism
• Chrome finish resists wear and tear
• Grooved guide ensures perfect
stapling
Mud Ring Cover
TW-MRCVR
$ 1.05
Mud Ring Single
Gang
TW-MR1
$ 0.80
100 11" Cable Ties
CT11-50COW
black
$ 3.50
CT11-50C9
white
$ 3.00
100 14" Cable Ties
GSE-505
$ 5.29
5
Arrow T-25 Staple Gun
100 4" Cable Ties
/16 (black)
591189-BL
100 Gardner Bender Coax Wire
Staples
60 Gardner Bender Service
Entrance Staples #6
26
ACNB11C-0
white
$ 35.00 Insulated Staple Wire Tacker
T59
$ 35.95
All steel construction lasts and lasts
T18
CT14-50COW
black
$ 3.50
CT14-50C9
white
$ 3.50
100 24" White Cable Ties
$ 10.00 CT24-175K9
white
$ 4.63
1,000 staples for the T-25
T25S
Ripley Pocket Toner
$ 2.50 RPT
• WIRE MANAGEMENT •
• WIRE MANAGEMENT •
100 Fast Clips for Single Coax
$ 19.00
1.800.444.7223
FC-S
Riser Rated Conduit Roll
$ 96.00
DF4X1C
1" x 100'
DH4X1C
1½" x 150'
$ 165.00
DJ4X1C
2" x 100'
$ 160.00
27
WERNER 4 ft. Fiberglass Step Ladder
$ 15.99
TW-3LED
•
•
•
•
•
High intensity LED
Long lifetime of LED (100,000 hrs.)
Adjustable head strap
Adjustable inclination
Uses 3 AAA batteries
Large Maglite
$ 18.55
MAGLITE1
Fluorescent Work Light
$ 25.00
LIGHT
•
•
•
•
•
6' three prong cord
12 amp grounded outlet
50 watt light output
End spotlight
Bulb lasts up to 7 years or 10,000
hours
WERNER 6 ft. Fiberglass Step Ladder
Mini Maglite
MAGLITE2
$ 12.77 PQS45
• Includes 2 AA batteries
and holster
Maglite Clip
$ 4.50
$ 12.40
• Spare bulb included
In-Wall Flashlight
CHWI
$ 29.00
Let Tradewind's in-wall flashlight,
light the way on your next wire
fishing job.
1.800.444.7223
$ 156.80
6Y680
500 Watt Halogen
Work Light
• 300 lb. capacity
• Type IA duty rating
• Fiberglass construction for working around
electricity
• Non-conductive side rails.
• Rugged top with dual drill holsters. Designed for
easy access to tools and small parts.
• EDGE professional bracing system provides
enhanced bracing strength and increased
resistance to damage.
• When you think of professional grade ladders, think
WERNER.
Little Giant All-in-One Ladder
10103
$ 352.42
No other ladder gives you the versatility of a Little Giant.
Independent tests prove the Little Giant will replace 60-70%
of all portable ladders currently being manufactured. When
you buy a Little Giant, you're not just getting one ladder.
You're getting 24 different ladders combined to make the
world's most versatile ladder system.
Little Giant Type 1A Features:
• Heavy duty aircraft-grade aluminum construction
• Rated to hold up to 300 lbs.
• Combines 24 different ladders into one convenient
system
• Lightweight and portable
• Complies with all applicable OSHA ANSI A14.2
standards
• Made in the USA
• Includes a full Lifetime Warranty
WERNER 8 ft. Fiberglass Step Ladder
8Y860
$ 255.00
• 300 lb. capacity
• Type IA duty rating
• Fiberglass construction for working around
electricity
• Non-conductive side rails.
• Rugged top with dual drill holsters. Designed for
easy access to tools and small parts.
• EDGE professional bracing system provides
enhanced bracing strength and increased
resistance to damage.
• When you think of professional grade ladders, think
WERNER.
1.800.444.7223
• WORK LIGHTS & LADDERS •
3-in-1 LED Head Light
MAGCLIP
28
• 300 lb. capacity
• Type IA duty rating
• Fiberglass construction for working around
electricity
• Non-conductive side rails.
• Rugged top with dual drill holsters. Designed for
easy access to tools and small parts.
• EDGE professional bracing system provides
enhanced bracing strength and increased
resistance to damage.
• When you think of professional grade ladders, think
WERNER.
• WORK LIGHTS & LADDERS •
$ 121.80
6Y679
29
Specially formulated grease like
product containing selected silicone
oils and inert silica fillers. This stiff,
tacky compound has excellent dielectric
properties, oxidation resistance and
water repellency. It is essentially nontoxic and non-melting and retains its
pliability even after extended service.
Chemplex 825 is resistant to a variety of
chemicals and is compatible with most
plastics and rubbers. Chemplex 825
has broad temperature range of -40 to
400°F (-40 to 204°C)
Tube of Silicone 2.8 oz.
FireStop Spray Foam 24
fl. oz.
FSIC24F
• 25 dB Ear Muffs
• Adjustable 3 position head band
• Ultra soft ear cushions for added
comfort.
• Protecting your hearing today means
fewer medical bills in the future!
You only have one set of eyes, so
protect them with these good looking
safety glasses.
Filter
White Hard Hat
1213222
White
$4.75 FireStop Silicone 10.5 fl.
91295
RCAN12
$11.65
10 pack
$ 18.00
20 Retainers for Respirator
RESPRET
$ 10.50
20 pack
$ 33.00
5 pack of
Dust Masks
TCMASK5
$ 2.79 First Aid Kit - 73
5 pack of paper dust masks with elastic
head band.
½" x 10' Coax Seal
Newborn Brand EZ-Thrust
$5.95 Caulking Gun
TW-COAXSEAL
0111
TW-BISHOP
Retainer
10 Filters for Respirator
oz.
FSS-10
• Applications: paint spraying,
priming, rust proofing, undercoating,
pesticides, etc.
$ 5.15
SGLASS
$4.75
100% silicone sealer
Architectural grade
Interior/exterior
Non-paintable
Mildew resistant
Won't crack, shrink or peel
$ 20.00
4MH61
Safety Glasses
Clear
•
•
•
•
•
•
Maintenance-Free Dual
Cartridge Respirator
$ 43.00
• The "first" expanding firestop
foam
• Tested to ASTM E-814 (UL
1479)
• Expands to fill and seal
openings.
• Cost effective and simple to use.
• Classified for 1 & 2 hour rated
assemblies. Conforms to all building
codes.
1213214
3¾" x 10' Bishop Tape
30
$6.00
TW-SILICONE
$ 11.75
EMUFFS
$15.99
$ 7.25
• Ideal for latex, silicone, adhesive,
rubber compound and polyurethanes
• EZ-Thrust mechanism
• Spout cutter
• Seal puncture tool
• Thumb release stops caulk flow
OSHA Approved
Safety Vest
23300
$ 11.00
OSHA approved bright orange safety
vest. Keep your team safe and visible to
traffic.
Piece
9038308
• SAFETY •
CHEMPLEX825-5.3
25dB Ear Muffs
www.pacemso.com
5.3 oz. Tube of 825 Silicone
$8.00 Compound
$ 15.95
• Includes critical
supplies not found
in other kits: trauma
pad, exam gloves,
conforming gauze
roll bandage, and
more.
• Unique compartmental organizers
• Reviewed and approved by a Medical
Advisory Board exclusively for First
Aid only
1.800.444.7223
www.pacemso.com
• SEALANTS •
1.800.444.7223
5.3 oz. Tube of 825 Silicone
Sealant
31
$ 22.35
• Tradewind two wheel
cart.
• This a is heavy duty cart
that works great both
heavy and light but bulky
boxes and equipment up to 250 lbs.
• Solid tires.
FSS-10
$ 10.50
FireStop Spray Foam 24 fl. oz.
FSIC24F
•
•
•
•
•
•
Heavy Duty Outdoor Extension
Cable Caddie
Cord
CC-1200
CEP-1202
25'
$ 21.00
CEP-1205
50'
$ 35.00
• Power Flex Outdoor Extension Cord.
• Moisture resistant molded
connectors
• Molded 3-Wire Male Plug
• Meets OSHA requirements
• UL/CUL Listed
• Designed for rugged outdoor use.
• Heavy duty 12/3 wire
A/C 2-Prong
Ground Adaptor
905-100
$.50
Form Fitted Padded
Work Gloves
114
$ 12.95
These form fitted work
gloves have excellent
grip and dexterity for
picking up small items.
Save your skin and carry a pair
of these gloves in every tool box.
32
TCWT40
$ 24.00
• Quick Setup
• Great buy - get one for each of your
trucks
8104960
$ 5.65
One set (2 straps) of high strength
ratcheting load straps.
300 Shoe Covers
CSBSCWPDB
$ 225.00
Constructed of rugged
1" steel tubing. The
Cable Caddy is 43" tall
and can accommodate
spools up to 16" wide
on solid steel ½" axles. The
Cable Caddy features 6 axle positions
for unlimited versatility. Also features
sturdy 7" rubber wheels.
$26.88
• Drip-resistant spigot
& screw-on lid
• Durable construction
• Osha Approved
$ 157.90
• One size fits all shoe covers
Forearm Forklift
7107493
$ 33.01
Furniture Pad/All Weather
Utility Pad
3 Gallon Cooler
with Spout
905-100
FireStop Spray Foam 24 fl. oz.
The "first" Expanding Firestop Foam
Tested to ASTM E-814 (UL 1479)
Expands to fill and seal openings.
Cost effective and simple to use.
Classified for 1 & 2 Hour Rated
Assemblies. Conforms to all building
codes.
Load Straps 1" x 14' High
Strength
5 Spool B.E.S. Cable
Caddie
CC-1200
$ 43.00
www.pacemso.com
• Deep scan to 1½" deep
• Detects wood and metal
studs
• AC wire warning
• Spotlight pointing system
FireStop Silicone 10.5 fl.
oz.
• SAFETY •
www.pacemso.com
• SAFETY •
1.800.444.7223
$ 23.75
TSPSL
Two Wheel
Hand Truck
401-4852
Shoulder Dolly
SDOLLY
$ 49.38
• Use your shoulders rather than your
back to move heavy loads
1.800.444.7223
Zircon Triscanner Pro
Wall Scanner
$ 11.50
Work boots were made to be scuffed,
not your customers floors. A furniture
pad makes a great surface for your tool
box and other tools when working in a
clients home. Measures a generous 6 ft.
by 8 ft.
33
•
•
•
•
Plug Bug - GFCI
Receptacle Tester
9610-PLUG-BUG
$ 6.25
• Detects common wiring problems in
standard and GFCI outlets
• For use on 110~125 VAC receptacles
$ 19.95
3½" high display digits, with 1999 max. reading
Auto/manual ranging
AC/DC volts to 600V
AC/DC current to 400mA
Triplett PairMaster LAN Cable Test Set
3240
$ 169.99
The PairMaster will check point to point wiring, commonly
referred to as wire-mapping. This tells the user whether or
not the cable pairs, 1/2, 3/6, 4/5, 7/8, are wired correctly at
both ends. Green LEDs indicate pass, Red LEDs indicate
fail. If a fault is detected, the corresponding fault code is
displayed on the large, two digit, seven segment LEDs.
• The Near End Crosstalk feature checks for excessive
A.C. coupling between each pair in a cable.
Digital Circuit Breaker Locator
9650
$ 107.10
• Tests 5 types of cables; RJ-45, RJ-11,
BNC, 1394 and USB.
• Simple one button test
• The XR-5 Checks for:
Continuity
Miswiring
Opens
Shorts
Crossover
Grounding
• Tests installed wiring or patch cables
• 600 ft test distance
• Remote attaches to main unit
• LED’s indicate connections and
faults
• Beeper provides audible
annunciation of test results.
• Kit includes:
BNC terminator
BNC, RJ-11, & RJ-45 jumper
cables
Padded cordura carrying case
9 Volt battery
Instruction manual
$ 48.00
• Triplett breaker Sniff-It
• Simply plug the transponder into an
outlet, run the receiver over the circuit
breaker panel and it will identity the
breaker for that outlet!
• Audible and visual indication.
• 120/220 VAC transmitter (250 VAC Max)
• UL listed
• Lifetime warranty.
www.pacemso.
• Compact DMM with backlit display & temperature test
(probe included)
• 3½" High display digits, with 1999 max. reading
• AC/DC voltage to 500V
• AC/DC current to 10A
• Overload protection with double insulated case
• Safety test leads with screw-on alligator clips
2030-C
3260-XR-5
$ 34.95
• TEST EQUIPMENT •
www.pacemso.
1101-A
Triplett Pocket-sized Digital Multi-Meter
• TEST EQUIPMENT •
WireMaster XR-5 Cable Tester
Triplett Compact Digital Multimeter
34
3274
Triplett PairMaster LAN Cable Test Kit
3241 KIT
$ 245.99
LAN Cable Test Set with 16 remote identifiers and
carrying case
Complete LAN Cable Testing Kit includes:
• 1 - PairMaster LAN Cable Test Set
• 16 - Remote identifiers
• 2 - RJ-45 in-line couplers
• 1 - RJ-45 patch cable (category 5)
• 1 - 9 volt battery
• 1 - Soft-sided carrying case with strap
• 1 - Instruction manual
SNIFF-IT2, AC Voltage Detector
9601-SNIFF-IT
•
•
•
•
$ 14.40
Safe, non-contact Voltage probe
Convenient pocket-size
Checks 600-800 Volts AC
Audible alerts when AC voltage is
present
$ 35.99
• 8 remotes with BNC connectors
included
• Tests for opens and shorts
• 120VAC line cross protection
• Real-time test helps identify
intermittents
• Use to identify coaxial cables in CCTV
security and surveillance systems,
broadcast TV, residential video
systems and cable TV (with F adapters)
• Identify any pair of wires such as
audio, video, phone lines, etc using
appropriate adapters.
1.800.444.7223
1.800.444.7223
WireMaster 8-Way Coax Cable
Mapper
35
•
•
•
•
LAN cable test set with cable length meter.
Built-in tone generator for cable tracing.
Low cost and simple to use.
Digital display shows 7 common wiring faults: shorted
pair, open pair, crossed pair, reversed pair, shield
continuity and split pair.
• Includes 2 remotes for wire mapping.
Triplett TDR Cable Fault Finder
$ 180.00
• TEST EQUIPMENT •
3271-TDR
•
•
•
•
•
•
•
•
$ 95.40
3395-K
• Trace wires and cables of all kinds including:
electrical wire, twisted pair, LAN cable, coax cable,
multi-conductor cable, telephone cable, speaker wire,
alarm wire and more.
• The Fox 2: deluxe tone generator with “TrueTrace”
• The Hound 2 probe: inductive tracer. Streamlined design allows for
better access in those hard-to-reach areas.
• LED intensifies as the tone signal gets stronger.
• Includes cordura carrying case
Test-Um Resi-Talker Test Set
KP312
4" RJ-45 to RJ-45 Test Lead
79-790
$ 18.00
For use with the Triplett 3273 LAN TDR Cable
Fault Finder.
6” BNC to BNC Test Lead
$ 18.00
6" BNC to Alligator Clip
79-792
$ 18.00
For use with the Triplett 3271 TDR Cable Fault
Finder.
18" BNC to Spike & Pin Clip
79-793
Telephone Test Set With
Headset For Hands-free Use
LB110
For use with the Triplett 3271 TDR Cable Fault
Finder.
1.800.444.7223
Triplett Fox 2 & Hound 2 Wire and Cable
Tracing Kit
Find cable length or distance to fault from one end!
Low cost digital cable length meter/TDR
Built-in tone generator for cable tracing and identification
Internal library of 39 standard cable types
Suitable for testing all types of communication cables
Compact, ergonomic design, weighs less than 8 oz.
Padded cordura holster included
Approximate range:
Coax: 6400 ft
Structured wiring: 2500 ft
Telephone cable: 2500 ft
79-791
$ 30.40
For use with the Triplett 3271 TDR Cable Fault
Finder.
36
www.pacemso.
$ 180.00
$ 112.30
• Tone and pulse dialing
• Microphone mute
• Continuous line polarity indication
(talk or monitor)
• Electronic ringer
• Amplified line monitor for volume
levels comparable to “of hook”
operation.
• Modular cord set attachment.
• Low battery indicator
• Headset jack.
• Battery-powered monitor mode
with auto power-off on dead lines or
when disconnected.
$ 450.15
The Resi-Talker is a self-contained selfpowered, portable telephone test set
for use by installers, repair technicians
and other authorized personnel for
temporary communications and the
operational service and installation of
telephone/data lines.
Features:
• Tone and pulse dialing
• Microphone mute feature
• Last number redial - 32 digits
• Continuous line polarity indication
(talk or monitor)
• Electronic ringer
• Amplified line monitor for volume
levels comparable to “off hook”
operation.
• Modular cord set attachment
• Low battery indicator
• Headset jack for hands-free
conversation
• Battery-powered monitor mode
with auto power off on dead lines or
when disconnected.
• This kit includes a Home Cabling
Toner and Home Cabling Tester.
• TEST EQUIPMENT •
3273-LAN TDR
1.800.444.7223
www.pacemso.
Triplett TDR LAN Cable Fault Finder
37
CH-LAGS
1.800.444.7223
• BOLTS & FASTENERS •
CH-LAGS-1/2
www.
/16" head
100 Course Thread Dry Wall
$ 6.50 Screws
½" head
$ 6.50 32172
7
#6 x 11/ 2"
$ 1.50
32174
#6 x 2"
$ 1.50
32169
#6 x 1"
$ 1.50
30 Spring Toggle Bolts
¼" x 4"
$ 23.00
$ 22.00 51671
50930
• Self-drilling one-piece anchor
• Versatile anchor accepts #6, #7 and
#8 sheet metal screws
50 5/16" x 2" Lag Screw
1122161
$ 13.65 100 # 8 x 2½" Galvanized Deck
• Zinc Plated Hex Head Lag Screws
Screw Exterior
$ 2.50
32195
100 Plastic Wall Anchors
#
6-8 x ¾"
HILTI Toggler Bolt without
Screws ¼"
$ 3.05 374496
50976
1131302
100 # 8 x 1¼" Phillips Pan Head
Self Tapping Screw
1131310
100 Sheet Metal Screws
$ 2.60 Pan Head
1131302
#8 7/ 8"
$ 2.26
1131298
#8 ¾"
$ 2.20
25 Metal Anchors for Dish
Installs
$ 22.00
52010
100 # 8 x ½" Self-Tapping Screw
32123
• Wafer Head
100 ¼" x 2¼" Tapcon Concrete
Anchor Screw
51542
100 8 x 1" Screw Self Tapping 100 ¼" Zinc Plated
32125
$ 1.50 Box Washers
• Wafer Head
Mud Ring
Single Gang
PVC Primer
$ 1.50
1133004
$ Call for Pricing
• Save several hours installing fixtures
using these newly designed anchors
into concrete block vs. old-fashioned
wing toggles.
• Grip range 3 / 8" to 35/ 8" (10mm
- 92mm)
1131298
43625
TW-MR1
$ 5.00
$ 0.80
$ 19.99
PVC Glue
#
38
100 EZ-100 Metal Drywall
Anchors
• BOLTS & FASTENERS •
32169
100 5/16" x 2½" Lag Bolts
1.800.444.7223
www.
32174
43692
$ 1.89
$ 4.00
Mud Ring Cover
TW-MRCVR
$ 1.05
39
Terms & Conditions:
Same Day Shipping
Orders received before 2:00 PM CST time will be shipped same day depending upon
availability.
EZ-RJ45
®
The new patented EZ-RJ45® connector
simplifies twisted pair terminations by allowing
the wires to be inserted through the connector
and out the front. This allows the technician to
easily verify the proper wiring order.
Electrical performance of the termination is
optimized by pulling the connector down over
the cable jacket and seating it tightly in the
rear of the connector. Reducing the distance
between the wire twists and contacts improves
performance!
•
•
•
•
•
•
Simple one piece design, no bars or liners
EZ to verify wire sequence
Reduces scrap, no wasted crimps
Faster terminations
More reliable, higher performance
Compatible with most RJ-45 style crimp
tools except for AMP
• Crimp with the patented EZ-RJ45®
crimp tool for even faster more reliable
terminations
Application
• Use in category 3, 5, 5E data networks
• Use in category 3, 5, 5E patch cords
• Use the EZ-RJ45® Cat 6+ connectors to meet
category 6 performance standards
Product located on Page 6
Terms
Cash, MasterCard, Visa, Discover, American Express, Bank Wire, Company Check
upon approval and Net 30 days for qualified buyers. Prices do not include freight
charges or insurance.
DOA Policy
Pace stands behind everything we sell. For 30 days from the date purchased
from Pace, we will replace the product (see Return Policy). After 30 days Pace will
instruct you how to get your product replaced or repaired under warranty from the
manufacturer.
Damaged Merchandise
Please inspect your shipment for shortages and any damage. By signing for the
shipment you are accepting the responsibility for the damaged goods and no
freight claim can be collected. If anything on the shipment appears damaged and
you choose to receive the order, put notes on the Bill of Lading. Pace’s obligation
ends when the freight carrier picks up the shipment.
Return Policy
Pace will accept product returns if:
a) the item was not a special order
b) item is returned in like new condition with all accessories in original box within
30 days of purchase.
c) proper RA procedures are followed. For an RA number, contact the RA department at 1-800-246-9620 for a Return Authorization number or, go to www.
pacemso.com for our RA Return Form and process.
No returns will be accepted without return authorization. A 20% restocking fee
may be assessed.
Business Hours
Monday through Friday 8:00 AM to 5:00 PM Central Standard Time.
Platinum Tools RJ45 Crimp Tool
This high quality crimp tool is designed to
quickly crimp and cut the wires of the EZ-RJ45®
Connector in one easy simple operation! The
ratcheted straight action crimping motion ensures
a uniform crimp every cycle. Features precision
cast crimping dies for superior accuracy. Built in
wire cutter and stripper for silver satin. All steel
frame with rust resistant black oxide finish.
Product located on Page 6
Catalog and Price List Errors
The accuracy of the catalog and prices listed have been carefully checked before
printing and we believe them to be reliable. However, Pace assumes no responsibility for any inaccuracies or typographical errors that may exist. All information
in this catalog is subject to change without notice. Pace is not responsible for
manufacturer’s changes in specifications or pricing.
Prices and availability are subject to change without notice.
We‘ve
Simplified
our online
shopping.
2. Shopping
Search
Browsing & Serching
Once inside the eDistribution
page, you can simply browse the
categories to the left, or use the
search-field to search by keyword
or part number.
1. Sign-in or Register
Sign In
If If you already have a user account in
our online store you can simply sign in
by filling in your username & password.
If you have forgotten your password,
click on the link below the sign in form to
retrieve it by email.
Register
Click on the link to register for instant
access, or fill out the credit application, (pdf) if you would like terms and conditions to your account. Once registered, you will receive a confirmation email
with a User ID issued to you. You can also set up a tax exempt status by faxing/
mailing a copy of it to the address/fax # provided in the email.
www.pacemso.com
Product
Categories
Adding Items to the
Cart
Next to every item is a box with
Shopping
the quantity set to “0” To add one
Cart Quick View
or more of that item, simply type
the number you want to order then click the “add to cart” button or
press return. If you want to delete items from your shopping cart, click the
trash button . Quick Clicks
allows you to conveniently store frequently
purchased parts you so can easily access them in the future. To add parts to
your Quick Clicks, click the icon
when browsing through the parts list.
Getting More Information on Products
To view more details on a particular product, click on the product number
or the picture adjacent to it. Many products include spec sheets and sales
tips for the product. You can also add them to your cart inside the detailed
view.
Previewing Shopping Cart
To preview a detailed list of what is in your shopping cart, click on the
“View Cart” button at the top of the screen. A detailed list with quantities,
pricing, and totals can be seen. You can also update or change any quantities in your order.
Cart descriptions,
quantities
and totals
3. Checkout
To checkout, hit the “Checkout button on the top
navigation bar. There you
will see your quantities and
total bill.
Total + shipping
& tax
Shipping Information
can be added,
changed or
deleted here.
Make Adjustments
to Quantities
Payment
Information
form
You can still make adjustments here to the quantity
of items. To see the changes click the update cart button
you’ve just changed.
next to the quantity
Change Shipping info
If the shipping information differs from what is displayed in the Shipping info
section, just click the button to add/edit/delete shipping information. Your shipping & handling costs will change automatically based on location.
Finalizing checkout
Once the payment Information is filled out and submitted, you will be re-directed to a Confirmation page. You should print this as a receipt for your records.
1.800.444.7223
Rochester, MN
Minneapolis, MN
763.542.9620
Fax: 763.542.9665
850.474.3900
Fax: 850.474.3964
3582 Technology Drive NW
Rochester, MN 55901
2454 Lousiana Ave, North
Minneapolis, MN 55427
9900-F Palafox Street
Pensacola, FL 32534
507.288.1853
Fax: 507.288.0831
www.pacemso.com
Pensacola, FL