5_Axis HSK-63F Toolholders - T

Transcription

5_Axis HSK-63F Toolholders - T
Spannzeuge HSK63 - F
Clamping Elements HSK63 - F
Outils de Serrage HSK63 - F
T-Tool USA LLC
2850 Glades Circle
Suite 11
Weston, FL 33327
P: 954-358-6071
F: 954-358-6073
E-Mail: [email protected]
Web : www.t-toolusa.com
“SUPERSPEED“
“COMPACT“
“SHRINK“*
INDEX
Item
Page
Collet Chuck “Superspeed“
3-5
Collet Chuck “Compact“
6
Shrink Fit Chucks* Not available in the US
7
Accessories
8 –11
Collets
12
Sales Conditions
13
Collet Chuck
taper size V DIN 69893-6 Form F
with inside clamping nut
for collets ER16 aftre DIN 6499
· hardened and ground
· for double slotted collets
· balanced
· deliverable in anti-clockwise rotation
“SUPERSPEED“
D1
D
L3
L2
L1
HSK - D1
HSK63 - F
L1
L2
L3
D
1 - 10
101
76
50
29
SPZ.HSK63F07616ERI
ER16
1 - 10
125
100
74
29
SPZ.HSK63F10016ERI
ER16
1 - 10
150
125
99
29
SPZ.HSK63F12516ERI
ER16
1 - 10
175
150
124
29
SPZ.HSK63F15016ERI
nominal size
clamping range
ER16
part number
Delivery condition: without collet, nut included.
Tecnical data subject to change without prior notice
3
Collet Chuck
taper size V DIN 69893-6 Form F
with inside clamping nut
for collets ER32 aftre DIN 6499
· hardened and ground
· for double slotted collets
· balanced
· deliverable in anti-clockwise rotation
“SUPERSPEED“
D1
D
L3
L2
L1
HSK - D1
HSK63 - F
L1
L2
L3
D
2 - 20
85
60
34
48
SPZ.HSK63F06032ERI
ER32
2 - 20
95
70
44
48
SPZ.HSK63F07032ERI
ER32
2 - 20
140
115
55
48
SPZ.HSK63F11532ERI
ER32
2 - 20
175
150
124
48
SPZ.HSK63F15032ERI
ER32
2 - 20
205
180
154
48
SPZ.HSK63F18032ERI
nominal size
clamping range
ER32
part number
Delivery condition: without collet, nut included
Tecnical data subject to change without prior notice
4
Collet Chuck
taper size V DIN 69893-6 Form F
with inside clamping nut
for collets OZ25 aftre DIN 6388
· hardened and ground
· for double slotted collets
· balanced
· deliverable in anti-clockwise rotation
“SUPERSPEED“
D
D1
L3
L2
L1
HSK - D1
HSK63 - F
L1
L2
L3
D
2 - 25,4
101
76
50
53
SPZ.HSK63F07625OZI
OZ 25
2 - 25,4
105
80
54
51
SPZ.HSK63F08025OZI
OZ 25
2 - 25,4
140
115
89
51
SPZ.HSK63F11525OZI
OZ 25
2 - 25,4
175
150
124
51
SPZ.HSK63F15025OZI
OZ 25
2 - 25,4
200
175
149
51
SPZ.HSK63F17525OZI
OZ 25
2 - 25,4
225
200
174
51
SPZ.HSK63F20025OZI
OZ 25
2 - 25,4
250
225
199
51
SPZ.HSK63F22525OZI
nominal size
clamping range
OZ 25
part number
Delivery condition: without collet, nut included
Tecnical data subject to change without prior notice
5
Collet Chuck
taper size V DIN 69893-6 Form F
for collets OZ25 after and DIN6388
· hardened and ground
· for double slotted collets
· balanced
· deliverable in anti-clockwise rotation
“COMPACT“
D
D1
L3
L2
L1
HSK - D1
HSK63 - F
L1
L2
L3
D
2 - 25,4
101
76
50
50
SPZHSK63F07625OZRKOM
OZ 25
2 - 25,4
140
115
89
50
SPZHSK63F11525OZRKOM
OZ 25
2 - 25,4
175
150
124
50
SPZHSK63F15025OZRKOM
OZ 25
2 - 25,4
200
175
149
50
SPZHSK63F17525OZRKOM
OZ 25
2 - 25,4
225
200
174
50
SPZHSK63F20025OZRKOM
OZ 25
2 - 25,4
250
225
199
50
SPZHSK63F22525OZRKOM
nominal size
clamping range
OZ 25
part number
Delivery condition: without collet, nut included
Tecnical data subject to change without prior notice
6
Shrink Fit
*Not available in the US
taper size V DIN 69893-6 Form F
· hardened and ground
· balanced
“SHRINK“
4.
5°
d2
D
d1
L3
L2
L1
HSK - D
d1
d2
L1
L2
L3
HSK 63 - F
6
17
100
75
49
SHR.HSK63F075006
8
19
100
75
49
SHR.HSK63F075008
10
21
100
75
49
SHR.HSK63F075010
12
23
100
75
49
SHR.HSK63F075012
16
27
100
75
49
SHR.HSK63F075016
20
31
100
75
49
SHR.HSK63F075020
25
36
100
75
49
SHR.HSK63F075025
6
17
145
120
94
SHR.HSK63F012006
8
19
145
120
94
SHR.HSK63F012008
10
21
145
120
94
SHR.HSK63F012010
12
23
145
120
94
SHR.HSK63F012012
16
27
145
120
94
SHR.HSK63F012016
20
31
145
120
94
SHR.HSK63F012020
25
36
145
120
94
SHR.HSK63F012025
6
17
185
160
134
SHR.HSK63F016006
8
19
185
160
134
SHR.HSK63F016008
10
21
185
160
134
SHR.HSK63F016010
12
23
185
160
134
SHR.HSK63F016012
16
27
185
160
134
SHR.HSK63F016016
20
31
185
160
134
SHR.HSK63F016020
25
36
185
160
134
SHR.HSK63F016025
Tecnical data subject to change without prior notice
part number
7
Internal Collet Nut
ER
pat. pending
Collet nut aftter DIN 6499 with external thread
A
C
SPAMUER16Zeta
6,5
M24x1
SPAMUER32Zeta
7,5
M40x1,5
B
C
10,5
M43x1,5
type
part number
ER 16 Zeta
ER 32 Zeta
C
B
Collet nut after DIN 6388 with external thread
type
part number
OZ 25 Zeta
SPAMUOZ25Zeta
C
B
Tecnical data subject to change without prior notice
8
Operating Tools
ER
pat. pending
Torque– nut
A
H
SW
V
STEC16Zeta
Ø22
17
85
3/8 "
EC 32 Zeta
STEC32Zeta
Ø38
27
96
1/2 "
OC 25 Zeta
STOC25Zeta
Ø41
27
110
1/2 "
A
H
SW
type
part number
EC 16 Zeta
SW
H
V
A
Screw-on-adapter
type
part number
ED 16 Zeta
SCHED16Zeta
Ø22
19
18
ED 32 Zeta
SCHED32Zeta
Ø38
30
21
OD 25 Zeta
SCHOD25Zeta
Ø41
36
21
A
L
SW
A
H
Spanner wrench for nut type Zeta
A
L
Tecnical data subject to change without prior notice
type
part number
E 16 Zeta
SCHE16Zeta
Ø22
146
E 32 Zeta
SCHE32Zeta
Ø38
220
O 25 Zeta
SCHO25Zeta
Ø41
123
9
Woodline Collet Nuts
Woodline collet nuts
type
part number
OZ1825 / RDO32
SPAMUOZW25Zeta
OZ1825 / RDO32
with ballbearings
SPAMUOZKW25Zeta
OZ1825 / RDO32
compact
SPAMUOZWC25Zeta
Standard spanner wrench
type
part number
E-SW 40 / OZ25
(RDO32)
SCHEW2540Zeta
E-SW 32 / OZ25COMP
(RDO25COMP)
SCHEW2532Zeta
Torque- nut
type
Part number
STEC 40 / OZ25
(RDO32)
STECW2540Zeta
STEC 32 / OZ25COMP
(RDO25COMP)
STECW2532Zeta
Torque wrenches and adapters
Tecnical data subject to change without prior notice
Typ
type
Artikel– Nummer
order number
THW 40 / OZ25
(RDO32)
THW2540Zeta
THW 32 / OZ25COMP
(RDO32COMP)
THW2532Zeta
10
Standard Collet Nuts
Ball- bearing nuts for collets DIN 6388
A
B
C
SPAMU1825OZK
60
30
M 48x2
SPAMU1825OZCOMP
50
30
M 48x2
type
part number
OZ. 1825 K
OZ. 1825 KC
Hook type spanner for nuts DIN 6388
type
SCHDIN638850 SCHDIN638850
Tecnical data subject to change without prior notice
D
part number
50
SW
45-50
11
collets
after DIN388 OZ
and DIN 6499 system Regofix
Tecnical data subject to change without prior notice
type
size
426 E / ER 16
1 - 10 mm
SPAZ16DIN6499 001-010
470 E / ER 32
3 - 20 mm
SPAZ32DIN6499 003-020
type
size
part number
part number
462 E / OZ 25
(RDO35)
2 - 25 mm
SPAZ25DIN6388 002-025
462E / OZ25
(RDO35)
2 - 25 mm
SPAZ25DIN6388
1/8 1/4 3/8 1/2 5/8 3/4 1“
12
TERMS & CONDITIONS OF SALE: T-Tool USA LLC
Delivery
Shipping dates are approximate and are based upon prompt receipt of all necessary information.
T-Tool USA LLC, “The Company”, shall not be liable for delays in delivery or failure to manufacturer of delivery (1) due to causes beyond its reasonable control, or (2) due to acts of God, acts of the Purchaser, acts of civil or military authorities, priorities, fires, strikes,
floods, epidemics, war, riot, delays in transportation or car shortages, or (3) inability due to causes beyond its reasonable control to obtain
necessary labor, materials, components or manufacturing facilities. In the event of any such delay, the date of delivery shall be extended for
a period equal to the time lost by reason of the delay.
In all cases, risk or damage to goods in transit shall fall upon the Purchaser, whose responsibility it shall be to file claims with the carrier.
Payments
Each shipment shall be considered a separate and independent transaction, and payment therefore shall be made accordingly. If shipments
are delayed by the Purchaser, payments shall become due on the date when the Company is prepared to make shipment. If the work to be
performed hereunder is delayed by the Purchaser, payments shall be made based on the purchase price and the percentage of completion.
Products held for the Purchaser shall be at the risk and expense of the Purchaser if the financial condition of the Purchaser at any time does
not, in the judgment of the Company, justify continuance of the work to be performed by the Company hereunder on the terms of the payment as agreed upon, the Company may require full or partial payment in advance or shall be entitled to cancel any order then outstanding
and shall receive reimbursement for its reasonable and proper cancellation charges, and in the event of bankruptcy or insolvency of the
purchaser or in the event any proceeding is brought against the Purchaser, voluntary or involuntary under the bankruptcy or any insolvency
laws, the Company shall be entitled to cancel any order then outstanding at any time during the period allowed for filling claims against the
estate and shall receive reimbursement for its reasonable and proper cancellation charges. All invoices are due and payable not later than 30
days from date of invoice unless specific terms have been agreed to or granted. The Company shall reserve the right to charge interest to
invoices due past 60 days of invoice date at a rate of prime plus 1%.
Orders under $250 may be prepaid by either Mastercard, Visa, or American Express credit cards unless credit has been approved otherwise.
Sales and Similar Taxes
Unless otherwise stated herein, the Company’s prices do not include sales, use, excise or similar taxes. Consequently, in addition to the
price specified herein, the amount of any present of future sales, use excise or other similar tax applicable to the sale or use of the equipment hereunder shall be paid by the Purchaser, or in lieu thereof the Purchaser shall provide the Company with a tax-exemption certificate
acceptable to the taxing authorities.
Cancellations and Returns
The Purchaser may cancel his order only upon written notice and upon payment to the Company of the reasonable and proper cancellation
charges. No returns will be accepted after 30 days from the date of receipt of goods.
Cancellation charges are 15% of the order value on standard products. No cancellation will be accepted on special orders, these would
include tooling that has been laser marked with purchaser’s company name or logo.
Limitation of Liability
The Company’s liability on any claim of any kind, including negligence, for any loss or damage arising out of, connected with, or resulting
from this contract, or from the performance of breach therefore, or from the manufacture, sale, delivery, resale, repair or use of any product
covered by or furnished under this contract shall in no case exceed the price allocable to the product covered by or furnished under this
contract nor exceed the price allocable to the product or part thereof which gives rise the claim, In no event shall the Company be liable for
special or consequential damages.
Security Title
Title and right of possession of the products sold hereunder shall remain with the Company and such products shall remain personal property until all payments hereunder (including deferred payments whether evidenced by notes or otherwise) shall have been made in full in
each, and the Purchaser agrees to do all acts necessary to perfect and maintain such right and title in the Company.
General
The Company will comply with all applicable Federal, State and local laws, and specifically represents that any goods to be delivered
hereunder will be produced in compliance with the requirements of the Fair Labor Standards Act of 1938, as amended.
The product sold hereunder was not designed or manufactured for use in or with any atomic installation or activity. If so used, the Company disclaims all responsibility of every kind, including negligence, and in addition the Purchaser shall indemnify and hold the Company
harmless for any liability or damage whatsoever arising out of the use of the product in such a manner.
Pricing / Delivery
Pricing and availability are subject to change without notice. All orders will be furnished at prices in effect at the time of order.
Delivery Terms
All prices are F.O.B. Weston, Florida 33327 including any handling or packing charges if applicable.
T-Tool USA LLC
2850 Glades Circle, Suite 11
Weston, FL 33327
Phone: 954-358-6071 Fax: 954-358-6073
[email protected]
www.t-toolusa.com