drying ironers

DRYING IRONERS
MCM 2500 2800 3200 Ø 500
MCM LINES:
WHEN DETAILS MAKE
THE DIFFERENCE!
The MCM ironer has been designed to satisfy the needs of
hotel, restaurants, retirement homes, hospitals and any other
facility which needs fresh cleaned and ironed linen.
Models MCM 2500, MCM 2800 and MCM 3200 are all available
with electrical, gas or steam heating and in four different
configurations: standard, with motorized exit, with folding
system and with feeder.
This product has been carefully studied in each detail, so the 50
cm diameter IMESA Drying Ironer assures high quality results
and the maximum safety for the user.
Studied to last: a reliable structure and high quality components! We are proud of
our product reliability in which we trust so much to grant the best warranty condition:
24 MONTHS TOTAL WARRANTY!
RA
AR
ANN
UA
GU
G
TT
★★
N
RA TE E
UA
High customer satisfaction!
★ GUAR
100%
E★
★ GG
EE
NTTE
AAN
EE
SATISFACTION
No other drying ironer in the market offers a result comparable
with IMESA MCM results!
Thanks to the double ironing belts and to their particular
configuration, the marks on the linen, typical of drying
ironing, are a problem of the past. The MCM series assures
high quality results, very similar to those of a chest ironer. The
belts wrap 87% of the roller diameter, in this way it is granted a
very high hourly production.
The old problem of black stains on the linen is eliminated
thanks to the special protection on the temperature probe.
The ironer models MCM RE, MCM PF and MCM FE are all
equipped with a double ironed linen exit. At any moment, the
user can choose to collect the linen at the front or rear exit. In
the second case the ironer become a “through machine” and
the laundry process is sped up; one or two operators work at
the front of the ironer, one or two operators work on the back to
cross fold and store the ironed linen.
WORKING WITH THE MAXIMUM SAFETY
The TWO EMERGENCY STOP
BUTTONS, one on each side, can
be easily reached if needed to
immediately stop the ironer.
The HAND SAFETY BAR protects
the user for any accidental pulling of
an art inside the ironer.
The PROTECTION WINDOWS below
the introduction table allows the
control of the folding process without
any risk for the user.
STEAM HEATING: working with steam, safety is really important. Each IMESA steam heated drying ironer is sent with its own
97/23/CE PED certificate.
GAS HEATING: the roller of the gas heated ironer has been designed to grant heating uniform throughout the entire length of the
roller. Due to the special heat circulation inside the roller huge energy savings are realized.
GOST CERTICATE:
IMESA drying ironers are respecting the Russian Federation manufacturing standards.
Do not waste time
and energy!
In MCM and MCM RE version the electronic control
allows to manage:
SAVE IN ENERGY AND
MAINTENANCE
The cooling key on the keypad actives
the Cooldown function: the heating
stops, but the ironer continues to work
using the thermal energy accumulated
by the ironer. When the temperature
goes below 80°C the ironer turns off
by itself.
This function allows the use of energy
that otherwise would be lost and also
reduces wear and tear on the ironing
belts.
- Start/stop of the drying ironer;
- Ironing speed in meters/minute;
- Ironing temperature;
- Cooldown.
EVERYTHING IS UNDER
CONTROL
Any error signalled during the ironer
operations is displayed and stored
in the microprocessor memory. The
ironer is equipped with a working
hours counter. This information can
be easily retrieved by the technician
during the service operation in order
to assist in finding the correct
diagnosis and solution.
The version MCM PF and MCM FE are equipped with a huge touch screen
which allows to manage:
-
Start/stop of the drying ironer;
Ironing speed in meters/minute;
Ironing temperature;
Cooldown;
Fold configuration;
Feeder activation;
Suction on the introduction table;
Exit side.
AUTOMATIC SPEED/TEMPERATURE
COMPENSATION
Thanks to this function the drying
ironer automatically chooses the most
suitable ironing speed in function of
the temperature. In this way the user
work is easier and high quality results
are always assured.
SAVE YOUR OWN IRONING
PROGRAMS!
Once the linen most suitable
parameters are chosen, the program
can be saved, named and recalled
again in the future when needed. In
case of folding system and feeder
equipped ironers the program considers
not only the ironing speed and
temperature, but also the type of fold.
IMESA:
ADDING VALUE
TO YOUR JOB!
IMESA MCM
STANDARD VERSION
The MCM ironer is characterised by a
strong structure, index of high reliability.
Thanks to its compact dimension, the
Drying Ironer can be installed against
a wall minimizing space requirements.
The drying ironer is equipped with a
table to help in the linen introduction
and with a collecting table for the
exiting linen.
MCM
SERIES:
IRONING
MADE EASY
FRONTAL/REAR MOTORIZED EXIT
Thanks to the motorized exit, in case
of working peaks, the rear exit can be
activated in order to make the laundry
process more fluid and increase the
ironer hourly production.
The drying ironer is equipped with a
big table to make the linen introduction
easier and with two collecting tables,
one for each exit. When the exit
collecting table is not used, it can be
pulled against the machine, saving
space.
MCM RE
SERIES:
OPTIMIZING
THE
RESOURCES
MAIN FOLD
The model MCM with folding system
makes the user free to schedule the
work following his needs:
MCM PF
SERIES:
- Possibility to work on one or two
independent lines;
- Possibility to configure the kind of fold:
single, double or no-folds. Thanks to
the optic fibres, the microprocessor
recognizes the linen length and when to
activate the air blades to fold the linen.
- Possibility to choose at any time the
front or rear ironed linen exit.
VERSATILITY
AT YOUR
DISPOSAL
FEEDER
Thanks to the automatic feeder just one
user can iron and fold linen of large
dimensions.
To make the introduction easier, the
drying ironer is equipped with a big
table where the user can put the linen
so it does not fall to the ground. Once
the linen is fixed using the feeder pliers,
it is automatically introduced into the
drying ironer to be collected at the exit
perfectly ironed and folded. The user
can choose at any time if the linen must
exit on the front or rear side.
MCM FE
SERIES:
SAVE IN
MANPOWER
IMESA: A LIFE BY YOUR SIDE
Imesa is a leading company in the production of laundry equipment. We achieved this goal thanks to more than 40 years of total
commitment to the continuing challenges to satisfy the growing technological expectation of human beings and meetings changes
in lifestyle.
Innovation, quality, safety, versatility, service and reliability: IMESA success is based on this six concepts. Innovation in
technology and proposal. Quality guranteed by an UNI EN ISO 9001 certified production system. Safety of products certified by
qualified operational organisation in various part of the world. Versatility and flexibility which allows many possibilities of
customisation. Reliability thanks to the solid product structure.
Customer satisfaction is IMESA main achievement. Thanks to an international and professional net of distributor and to a well
trained service net, IMESA can assure a global service in Italy, in Europe and in all the world.
During the offer step, IMESA distributor offers a complete support in the correct equipment choice and complete the job with a
financial analysis of the investment as well as with the project.
IMESA can deliver in a very short time thanks to equipment stock in many countries: Italy, Spain, French, Portugal, Algeria,
Hungary, …
The wide service net can assure a quick technical assistance in case of necessity and the spare parts can be easily purchased
in IMESA official website.
+39 0421 468000
[email protected] - www.imesa.it
The manufacturer declines all responsibility for any inexactitudes contained in this catalogue. The manufacturer reserves the right to bring without warning any modifications he might believe necessary, without changing the essential characteristic of the product.
DISTRIBUTED BY
+ 39 0421 468011
C MCM GB rev.00 04/2010 ris. 00
IMESA S.p.A Via degli Olmi, 22 - 31040 Cessalto (TV) ITALIA