Aviation Reels

Comments

Transcription

Aviation Reels
Aviation Reels
| Refueling | Airport Hydrant Fueling Operations | Sensing | Static Grounding |
You Can’t Buy
A Better Reel.
Family owned and operated since 1933
C
AVIATION REELS
G
CONTENTS
Hannay hose reels come in all sizes and capacities.
H
Reel Type
I.D. Hose Sizes
Page
Hannay Reels Policies – Note to Designers and Engineers,
Paint Notice
Hannay Reels Spec Worksheet
2
3
Manual or Power Rewind Reels
Series V-1-1/2"
Series V-2"
Series V-3"
Series V-4"
Series V-5000 Single Wrap
Series V-6000
Spring Rewind Reels
Series N600 Dual Hose
Series V-N800
Series V-800
Series V-900
Static Grounding Reels
Series GR/HGR
X
A
1" – 1-1/2"
1-1/2" or 2"
2" – 3"
3" or 4"
1-1/2" – 3"
1"
4-5
6-7
8
9
10-11
12-13
1/4" – 3/8"
1"
1"
1-1/4" or 1-1/2"
14
15
16
17
F
18-19
Note to Designers and Engineers
The reels shown in this catalog are the standard of the industry.
These models reflect various installation and performance
requirements.
The high quality of our standard steel construction is only
the beginning.
Hannay Reels offers any size configuration to fit a defined
space, and we construct many models of reels of aluminum
or stainless steel. Specifically, we use 5000 and 6000 Series
aluminum and 304 stainless steel in the manufacture of
frames, discs, drums, and internals as well as other structural
components. This type of construction eliminates the need
for maintenance repainting and part replacement due to rust
or corrosion.
Please consult factory on any fuel handling questions.
For the many accessories and components available on our
standard reel models such as roller guides, switches, brakes
and locks, etc., please refer to our Ordering & Accessory Guide
H-0415-OA.
Notice on Reel Finish
Standard finish on Hannay reels is a high performance
modified acrylic enamel paint. Standard color is metallic
graphite. Other colors available at no additional cost include
red, white, black, and primer.
Most of the major components on standard reels are
e-coated prior to receiving final topcoat paint finish. This
combination of e-coat and enamel topcoat will meet the
finish requirements of most customer applications and
environments.
In cases where requirements cannot be met with the
standard finish, Hannay Reels can coat any model reel with
an automotive primer, allowing application of final coating at
your facility. Alternatively, Hannay Reels can provide a quote
for matching a customer-provided paint specification. For
further information, please contact your Hannay Reels sales
engineer and a special paint request form will be sent to you.
For environments where no paint finish is suitable, we offer
both aluminum and stainless steel (304 grade) construction
on most reel models.
Mounting Hole Sizes
2
N Series Reels
7/16" wide x 7/8" long slot
running front to back
Pressed Frame Reels and
Channel Framed Reels
7/16" wide x 7/8" long slot
running left to right
Series 5000
5/8" round holes
Static Grounding Reels
13/32" round holes
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
[email protected]
Y
D
E
Y
D
HOW DO I GET THE RIGHT REEL?
Hannay Reels Spec Worksheet
To specify Hannay reels, fill out this simple form and mail or fax it to your dealer.
Photocopy this page or download and print from hannay.com
1. Who is the reel for?
Contact
/ /
Date
Company
Division
Street Address
City
State
Telephone ( Zip
Country
Fax ( )
)
2. What is the reel for?
HOSE (check one):
Indicate your custom specifications
Storage only
Live Single hose
Live Dual hose
Inside diameter:
Hose length:
Bend radius:
Outside diameter:
Hose weight:
Coupling spacing:
Flat hose dimensions:
Type of product handled live application: (check one):
Liquid (specify):
Temperature:
Oxygen/Acetylene:
Gases (specify):
Pressure:
Hydraulic fluid (specify):
Fluid path type: (check one):
Steel (standard)
Reel inlet type: (check one):
Swivel joint 90° (standard)
Reel outlet type (riser):
Aluminum
Other (specify):
Stainless Steel
4. Specifying Location
of Components
Other
Straight
Optional Location of Components:
Location of the inlet, outlet riser, and rewind
mechanism can be varied to meet your
requirements and must be specified on
your order. Unless otherwise specified,
most reels will be shipped as Right Top
Rewind with the inlet, outlet riser, and
rewind mechanism on the operator’s right.
Size:
Thread (check one):
National Pipe Thread (NPT)
Joint Industry Committee (JIC)
National Standard Thread (NST) British Standard Pipe (BSP)
CABLE (check one):
Live*
Other
RT – Right Top Rewind
Standard – Always look at
your reel from this position
to determine right hand or
left hand.
Indicate your custom specifications
Storage only
*Number of conductors, or wire gauge, required:
*Number of connectors:
Cable weight:
*Voltage:
Outside diameter:
*Amperage (live application only):
Bend radius:
3. What features does the reel need?
Cable length:
RB – Right Bottom Rewind
LT – Left Top Rewind
Standard for 1500, 1800,
2000 & 4000 Series reels.
Check type of rewind:
MANUAL REWIND
Disc rewind (hand over hand)
LB – Left Bottom Rewind
Gear-driven crank
Direct crank (permanent or removable)
Chain-driven crank
Air
Electric (voltage):
Hydraulic
POWER REWIND
Spring
Type of installation (check one):
Floor
Wall
Overhead
Temperature Range:
Environment:
Accessories (if any):
Hose/Cable Stop:
Note: Use component location initials as suffix
after model number (ie: V-EPJ28-25-26 RT)
5. P
lease note size and/
or weight limitations
for your installation
Vehicle
Yes
No
SPECIFICATIONS
Roller Assemblies:
Finish:
Painted steel (standard)
Aluminum
Polished
Unpolished
Stainless steel
Polished
Unpolished
Check type of installation and roller position for spring reels:
rag
D
Position SR
L ift
Position VR
tretch (no roller)
S
Position TR
Depth:
Height:
all Mount
W
Position TR
ecovery (pick-up)
R
(no roller)
Width:
Weight:
or
or
or
Constant tension available on all roller positions
hannay.com
[email protected]
Phone: 518-797-3791
Toll Free: 1-877-467-3357
For custom applications
not found in our catalogs,
call the Inside Sales Group
at 518-797-3791.
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
3
C
MANUAL OR POWER REWIND REELS
Series V-1-1 ⁄ 2"
G
H
To handle single 1" through 1-1/2" I.D. hose.
• Rugged, industrial-duty construction.
• Gear-driven crank rewind or chain and sprocket drive powered by
an electric, hydraulic or compressed air motor.
• Optional auxiliary crank rewind for power rewind reels.
• Crank rewind reels supplied with pinion brake and
power rewind reels with a comet brake.
• Standard inlet: 90° ball bearing swivel joint, 1-1/2" female NPT
threads, and 2" Victaulic groove.
X
Y
A
D
• Standard outlet: flanged riser, 1-1/2" female NPT threads.
• Other sizes and/or threads can be furnished and
must be specified.
• Inlet, outlet riser, hub assembly are aluminum for jet fuels.
• Stainless steel fluid path is available at extra cost.
• Rollers and roller mounting brackets are accessory items.
Must specify roller position.
F
• Chain guard is available upon request, must be specified.
• Pressures to 600 psi (41 bar).
Standard configuration
with V-EPJ option
shown
• Temperatures from -25°F to +250°F (-32°C to +121°C).
• Consult factory for other pressures and temperatures.
Standard configuration with
V-EPJ option and shown with
optional Assembly C2 roller
4
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
[email protected]
E
Y
D
MANUAL OR POWER REWIND REELS
Series V-1-1 ⁄ 2"
PARTS DRAWING – ISO 18
Model
Number
For Power
Rewind
see Notes
4&5
V-26-19-21
V-32-19-21
V-40-19-21
V-24-23-24
V-32-23-24
V-38-23-24
V-20-25-26
V-24-25-26
V-28-25-26
V-16-30-31
V-20-30-31
† V-22-30-31
† V-28-30-31
† V-24-33-34
Approx. Weight
Crank Rewind
lb. kg
Hose Capacity of Reel
feet m
Reel Dimensions***
in. mm
See Note 4
I.D. in.
mm
1
25
1-1/4
32
1-3/8
35
1-1/2
38
O.D. in.
mm
1.58
40
1.89
48
2
51
2.10
53
60
18
90
27
125
38
100
30
150
46
200
61
100
30
125
38
175
53
75
23
150
46
175
53
250
76
250
76
60
18
75
23
100
30
85
26
125
38
175
53
75
23
100
30
150
46
50
15
100
30
125
38
200
60
175
53
50
15
75
23
100
30
75
23
125
38
150
46
60
18
75
23
110
34
50
15
75
23
100
30
175
53
175
53
50
15
75
23
100
30
50
15
75
23
100
30
60
18
75
23
100
30
50
15
75
23
100
30
150
46
150
46
NET
SHIP
A
B
D
E
99
45
112
51
128
58
102
46
119
54
130
59
106
48
114
52
123
56
106
48
114
52
118
54
131
59
129
59
141
64
154
70
170
77
144
65
161
73
172
78
148
67
156
71
165
75
156
71
164
74
168
76
181
82
179
81
23
584
29.5
749
37.5
953
21
533
29.5
749
35
889
17
432
21
533
25.5
648
13
330
17
432
19
483
25.5
648
20.5
521
17.5
445
24
610
32
813
15.5
394
24
610
29.5
749
11.5
292
15.5
394
20.0
508
7.5
191
11.5
292
13.5
343
20.0
508
15.5
394
20.5
521
20.5
521
20.5
521
20.5
521
20.5
521
20.5
521
25.5
648
25.5
648
25.5
648
25.5
648
25.5
648
25.5
648
25.5
648
31.5
800
18.75
476
18.75
476
18.75
476
22.75
578
22.75
578
22.75
578
24.75
629
24.75
629
24.75
629
28.75
730
28.75
730
28.75
730
28.75
730
31.75
806
CRANK
F
POWER
F
G
H
X
Y
29.5
749
36.0
914
44.0
1118
27.5
699
36.0
914
41.5
1054
23.5
597
27.5
699
32.0
813
19.5
495
23.5
597
25.5
648
32.0
813
27.25
692
31.88
810
38.38
975
46.38
1178
29.88
759
38.38
975
43.88
1115
25.88
657
29.88
759
34.38
873
21.88
556
25.88
657
27.88
708
34.38
873
29.63
753
21.5
546
21.5
546
21.5
546
23.5
597
23.5
597
23.5
597
27.88
708
27.88
708
27.88
708
29.88
759
29.88
759
29.88
759
29.88
759
33.62
854
12.12
308
12.12
308
12.12
308
12.12
308
12.12
308
12.12
308
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
17.75
451
15
381
21.5
546
29.5
749
13
330
21.5
546
27
686
9
229
13
330
17.5
445
7.75
197
9
229
11
279
17.5
445
13
330
16.75
425
16.75
425
16.75
425
16.75
425
16.75
425
16.75
425
21.75
552
21.75
552
21.75
552
21.75
552
21.75
552
21.75
552
21.75
552
27.75
705
Notes:
1. S
pecifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown
and with disc sizes in other diameters.
3. Dimensions shown for reels up to and including 30-31 disc size reflect
pressed frames. All others are rollformed channel frames.
E
B
4. Weights shown in chart are for crank rewind models. Prefix model number
with V-. ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kg
Electric 40/18.1
40/18.1
Hydraulic 20/9.1
20/9.1
Air
20/9.120/9.1
C
10.5"
267
G
5. When ordering power rewind models, replace prefix V- with:
H
V-A= Air Rewind–Supplied with control valve and 18" air hose.
V-EPJ=Explosion-Proof Electric Rewind (1/2 HP)–Supplied with
explosion-proof switch, solenoid, and junction box.
V-HD= Hydraulic Rewind–Not supplied with control valve.
6. For Air Rewind on models over 100 ft. of 1-1/2", consult factory.
7. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and
the inlet swivel joint.
Y
X
A
D
F
† Some applications may require a different motor and/or a
clutch/reduction unit.
***X, Y indicate mounting holes. See page 2.
hannay.com
[email protected]
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
5
C
MANUAL OR POWER REWIND REELS
Series V-2"
G
H
To handle single 1-1/2" or 2" I.D. hose.
• Rugged, industrial-duty channel frame construction.
• Gear-driven crank rewind or chain and sprocket drive powered
by an electric, hydraulic or compressed air motor.
• Optional auxiliary crank rewind for power rewind reels.
• Crank rewind reels supplied with pinion brake and
power rewind reels with a comet brake.
• Standard inlet: 90° ball bearing swivel joint with 2" Victaulic groove.
X
• Standard outlet: flanged riser, 2" female NPT threads.
Y
• Other sizes and/or threads can be furnished and
must be specified.
• Inlet, outlet riser, hub assembly are aluminum for jet fuels.
A
D
• Stainless steel fluid path is available at extra cost.
• Rollers and roller mounting brackets are accessory items.
Must specify roller position.
• Pressures to 150 psi (10 bar).
F
E
• Temperatures from -50°F to +180°F (-45°C to +82°C).
• Consult factory for other pressures and temperatures.
Standard configuration
with V-EPJ option shown
Chain Clutch - Reduction Units
• Recommended on reels with
39" diameter or larger discs,
or when increased torque and
slower rewind speeds are required.
• Factory installed.
6
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
[email protected]
Y
D
MANUAL OR POWER REWIND REELS
Series V-2"
PARTS DRAWING – ISO 35
Model
Number
For Power
Rewind
see Notes
3&4
Hose Capacity of Reel
feet m
Approx. Weight
Crank Rewind
lb. kg
Reel Dimensions***
in. mm
See Note 3
I.D. in.
mm
1-1/2
38
2
51
O.D. in.
mm
2.06
52
2.67
68
70
21
100
30
140
43
60
18
100
30
140
43
250
76
350
107
50
15
75
23
100
30
50
15
75
23
100
30
150
46
200
61
V-232-26-27
V-238-26-27
V-246-26-27
V-224-33-34
V-228-33-34
V-234-33-34
V-232-39-40
V-240-39-40
NET
SHIP
A
B
D
E
104
47
145
66
196
89
70
32
92
42
133
60
180
82
218
99
154
70
195
88
246
112
140
64
162
73
203
92
250
113
288
131
23.75
603
30.25
768
38.25
972
15.75
400
19.75
502
26.25
667
23.75
603
32.25
819
17.5
445
24
610
32
813
9.5
241
13.5
343
20
508
17.5
445
26
660
27
686
27
686
27
686
31.5
800
31.5
800
31.5
800
40
1016
40
1016
25.75
654
25.75
654
25.75
654
31.75
806
31.75
806
31.75
806
39
991
39
991
CRANK
F
POWER
F
G
H
X
Y
31
787
37.5
953
45.5
1156
23
584
27
686
33.5
851
31
787
39.5
1003
32.75
832
39.25
997
47.25
1200
24.75
629
28.75
730
35.25
895
32.75
832
41.25
1048
26.62
676
26.62
676
26.62
676
33.38
848
33.38
848
33.38
848
39.88
1013
39.88
1013
13.75
349
13.75
349
13.75
349
17.5
445
17.5
445
17.5
445
20.38
518
20.38
518
16.25
413
22.75
578
30.75
781
8.25
210
12.25
311
18.75
476
16.25
413
22.75
578
23.25
591
23.25
591
23.25
591
27.75
705
27.75
705
27.75
705
37
940
37
940
Notes:
1. S
pecifications subject to change.
E
B
2. Upon request, reels can be supplied with drum lengths other than shown
and with disc sizes in other diameters.
3. Weights shown in chart are for crank rewind models. Prefix model number
with V-. ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kg
Electric 40/18.1
40/18.1
Hydraulic 20/9.1
20/9.1
Air
20/9.120/9.1
C
15.5
394
4. When ordering power rewind models, replace prefix V- with:
G
V-A= Air Rewind–Supplied with control valve and 18" air hose.
V-EPJ=Explosion-Proof Electric Rewind (1/2 HP)–Supplied with
explosion-proof switch, solenoid, and junction box.
V-HD= Hydraulic Rewind–Not supplied with control valve.
H
5. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the
inlet swivel joint.
***X, Y indicate mounting holes. See page 2.
hannay.com
[email protected]
Y
D
X
A
F
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
7
C
MANUAL OR POWER REWIND REELS
G
Series V-3"
H
To handle 2" through 3" I.D. hose.
• Rugged, ­industrial-duty channel frame construction.
• Gear-driven crank rewind or chain and sprocket drive powered by an
electric, hydraulic or compressed air motor.
• Pinion shaft brake as auxiliary crank rewind on power reels, at extra cost.
• Crank rewind supplied with pinion brake, power reels with comet brake.
Other brakes and locking devices may be specified.
• Standard inlet: 90° ball bearing swivel joint, 3" ­Victaulic groove.
X
• Standard outlet: flanged riser, 3" female NPT threads.
• Consult factory for other sizes and/or threads.
Standard
configuration
shown
• Inlet, outlet riser, and hub assembly are ­aluminum for jet fuels.
A
• Stainless steel fluid path is available at extra cost.
• Rollers and roller mounting brackets are accessory items.
Specify roller position.
• Pressures to 150 psi (10 bar).
Chain Clutch - Reduction Units
• Standard on reels with 39" diameter
or larger discs, or when increased
torque and slower rewind speeds
are required.
• Factory installed.
F
• Temperatures from -50°F to +180°F (-45°C to +82°C).
• Consult factory for other pressures and temperatures.
PARTS DRAWING – ISO 57
Model
Number
For Power
Rewind
see Notes
3&4
Hose Capacity of Reel
feet m
Approx. Weight
Crank Rewind
lb. kg
Reel Dimensions***
in. mm
See Note 3
I.D. in.
mm
O.D. in.
mm
V-334-26-27
V-340-26-27
V-350-26-27
V-332-33-34
V-346-33-34
V-332-39-40
V-338-39-40
V-334-45-46
2
51
2.67
68
50
15
85
26
100
30
70
21
140
43
120
37
185
56
200
61
2-1/2
64
3.25
83
*25
8
*35
11
*50
15
25
8
50
15
65
20
90
27
120
37
3
76
3.78
96
–
–
–
–
–
–
25
8
50
15
50
15
80
24
100
30
NET
116
53
153
69
213
97
125
57
237
108
201
91
239
108
361
164
SHIP
166
75
203
92
340
155
195
88
307
139
271
123
309
140
431
195
A
B
C
D
E
26.25
667
32.25
819
42.25
1073
23.75
603
38.25
972
23.75
603
30.25
768
26.25
667
20
508
26
660
36
914
17.5
445
32
813
17.5
445
24
610
20
508
15.5
394
15.5
394
15.5
394
20
508
20
508
20
508
20
508
20
508
27
686
27
686
27
686
31.5
800
31.5
800
40
1016
40
1016
46
1168
27.38
695
27.38
695
27.38
695
31.75
806
31.75
806
39
991
39
991
45
1143
Notes:
8
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
F
POWER
F
G
H
X
Y
35.75
908
41.75
1060
51.75
1314
33.25
845
47.75
1213
33.25
845
39.75
1010
35.75
908
36.25
921
42.25
1073
52.25
1327
33.75
857
48.25
1226
33.75
857
40.25
1022
36.25
921
27.12
689
27.12
689
27.12
689
33.88
861
33.88
861
40.38
1026
40.38
1026
46.38
1178
14.25
362
14.25
362
14.25
362
18
457
18
457
20.88
530
20.88
530
23.88
607
18.75
476
24.75
629
34.75
883
16.25
413
30.75
781
16.25
413
22.75
578
18.75
476
23.25
591
23.25
591
23.25
591
27.75
705
27.75
705
37
940
37
940
43
1092
B
1. S
pecifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown
and with disc sizes in other diameters.
3. Weights shown in chart are for crank rewind models. Prefix model number
with V-. ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kg
Electric 40/18.1
40/18.1
Hydraulic 20/9.1
20/9.1
Air
20/9.120/9.1
4. When ordering power rewind models, replace prefix V- with:
V-A= Air Rewind–Supplied with control valve and 18" air hose.
V-EPJ=Explosion-Proof Electric Rewind (1/2 HP)–Supplied with
explosion-proof switch, solenoid, and junction box.
V-HD= Hydraulic Rewind–Not supplied with control valve.
5. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and
the inlet swivel joint.
*Be sure to verify bend radius of hose before ordering.
***X, Y indicate mounting holes. See page 2.
CRANK
E
C
G
H
Y
X
A
D
F
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
[email protected]
Y
D
E
Y
D
MANUAL OR POWER REWIND REELS
Series V-4"
To handle 3" or 4" I.D. hose.
• Rugged, ­industrial-duty channel frame construction.
• Gear-driven crank rewind, or chain and sprocket drive powered
by an electric, hydraulic or compressed air motor.
• Pinion shaft brake as auxiliary on power reels, at extra cost.
• Crank rewind reels supplied with pinion brake, power reels with comet
brake. Other brakes and locking devices may be specified.
• Standard inlet: 90° ball bearing swivel joint, 4" ­female NPT threads.
• Standard outlet: flanged riser with 4" female NPT threads.
• Consult factory for other sizes and/or threads.
Standard
configuration
shown
• Standard outlet riser and hub assembly are steel with iron inlet swivel
joint. For jet fuels, can be supplied in stainless steel, at extra cost.
• Rollers and roller mounting brackets are accessory items.
Specify roller position.
Chain Clutch - Reduction Units
• Standard on all Series V4" reels
for increased torque and slower
rewind speeds as required.
• Factory installed.
• Pressures to 150 psi (10 bar).
• Temperatures from -50°F to +180°F (-45°C to +82°C).
• Consult factory for other pressures and temperatures.
PARTS DRAWING – ISO 75
Model
Number
For Power
Rewind
see Notes
3&4
Hose Capacity of Reel
feet m
Approx. Weight
Crank Rewind
lb. kg
Reel Dimensions***
in. mm
See Note 3
I.D. in.
mm
O.D. in.
mm
V-426-52-54-36
V-430-52-54-36
V-434-52-54-36
V-426-56-58-36
V-430-56-58-36
V-434-56-58-36
3
76
3.78
96
60
18
85
26
100
30
40
12
50
15
65
20
4
102
5
127
–
–
*30
9
*40
12
–
–
*40
12
*55
17
NET
255
116
275
125
290
132
290
132
305
138
325
147
SHIP
325
147
345
156
360
163
360
163
375
170
395
179
A
B
C
D
E
18.50
470
22.5
572
27
686
18.5
470
22.5
572
27
686
11.5
292
15.5
394
20
508
11.5
292
15.5
394
20
508
36
914
36
914
36
914
36
914
36
914
36
914
53
1346
53
1346
53
1346
57
1448
57
1448
57
1448
52
1321
52
1321
52
1321
56
1422
56
1422
56
1422
CRANK
F
POWER
F
G
H
X
Y
29.75
756
33.75
857
38.25
972
29.75
756
33.75
857
38.25
972
29.25
743
33.25
845
37.75
959
29.25
743
33.25
845
37.75
959
55
1397
55
1397
55
1397
58
1473
58
1473
58
1473
29
737
29
737
29
737
30
762
30
762
30
762
11
279
15
381
19.5
495
11
279
15
381
19.5
495
50
1270
50
1270
50
1270
54
1372
54
1372
54
1372
Notes:
1. S
pecifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown
and with disc sizes in other diameters.
E
B
3. Weights shown in chart are for crank rewind models. Prefix model number
with V-. ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kg
Electric 40/18.1
40/18.1
Hydraulic 20/9.1
20/9.1
Air
20/9.120/9.1
C
G
4. When ordering power rewind models, replace prefix V- with:
V-A= Air Rewind–Supplied with control valve and 18" air hose.
V-EPJ=Explosion-Proof Electric Rewind (1/2 HP)–Supplied with
explosion-proof switch, solenoid, and junction box.
V-HD= Hydraulic Rewind–Not supplied with control valve.
H
5. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and
the inlet swivel joint.
*Be sure to verify bend radius of hose before ordering.
X
A
***X, Y indicate mounting holes. See page 2.
hannay.com
[email protected]
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Y
D
F
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
9
C
POWER REWIND REELS
Series V-5000
Single
Wrap
To handle single 1-1/2" I.D. through 3" I.D. hose.
G
H
• Effortless and fast rewinding, wrapping of hose.
• Chain and sprocket drive powered by electric, hydraulic,
or compressed air motor.
• Auxiliary crank rewind, optional.
• 12 volt rewind, comet brake, reduction unit standard.
• Air brake optional.
• Inlet, hub assembly is aluminum.
X
Y
A
D
• Consult factory for other pressures, temperatures, and options.
Series V-5100
• Standard inlet: 90° ball bearing swivel joint, 1-1/2" female
NPT threads, 2" Victaulic groove, flanged riser with
1-1/2" female NPT threads.
• Pressures to 600 psi (41 bar).
F
E
• Temperatures from -25°F to +250°F (-32°C to +121°C).
Series V-5200
• Standard inlet: 90° ball bearing swivel joint, 2" Victaulic groove,
flanged riser with 2" female NPT threads.
• Pressures to 150 psi (10 bar).
• Temperatures from -50°F to +180°F (-45°C to +82°C).
Series V-5300
Standard configuration shown
Series V-5300
• Standard inlet: I-hub (aluminum only) straight 3" Victaulic groove
inlet, flanged riser with 3" female NPT threads.
• Pressures to 150 psi (10 bar).
• Temperatures from -50°F to +180°F (-45°C to +82°C).
• Optional 90° ball bearing alum swivel joint, 3" Victaulic groove,
flanged riser with 3" female NPT threads.
• Optional I-hub joints are available in:
• 3" straight flanged
• 3" 90° flanged
Standard straight I-hub
for Series V-5300
• 3" 90° Victaulic
90° Victaulic version
I-hub assembly with riser
for Series V-5300
10
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
[email protected]
POWER REWIND REELS
Single
Wrap
Series V-5000
PARTS DRAWING – ISO 197
Hose Capacity of Reel
feet m
Model
Number
For Power
Rewind
see Note 2
V-5111-48-50-20
Y
V-5111-56-58-20
D
V-5218-56-58-20
V-5111-62-64-20
V-5218-62-64-20
V-5218-70-72-20
V-5319-62-64-30
V-5319-70-72-30
V-53­19-78-80-30
Approx. Weight
lb. kg
I.D. in.
mm
1-1/2
38
2
51
2-1/2
64
3
76
O.D. in.
mm
2.06
52
2.67
68
3.25
83
3.78
96
50
15
75
23
100
30
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
50
15
75
23
100
30
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
50
15
75
23
100
30
–
–
–
–
–
–
–
–
–
–
–
–
50
15
–
–
–
–
NET
SHIP
310
141
330
150
340
154
370
168
390
177
400
181
400
182
410
186
420
191
385
175
405
184
415
188
445
202
465
211
475
215
475
216
485
220
495
225
Reel Dimensions***
in. mm
A
B
C
E
10.63
270
10.63
270
10.63
270
11.50
292
11.50
292
11.50
292
12.25
311
12.25
311
12.25
311
2.75
70
2.75
70
2.75
70
3.63
92
3.63
92
3.63
92
4.38
111
4.38
111
4.38
111
20
508
20
508
20
508
20
508
20
508
20
508
30
762
30
762
30
762
48
1219
56
1422
62
1575
56
1422
62
1575
70
1778
62
1575
70
1778
78
1981
Notes:
POWER
POWER
with I-Hub
F
G
H
X
Y
17.5
445
17.5
445
17.5
445
19.25
489
19.25
489
19.25
489
21.25
540
21.25
540
21.25
540
–
–
–
–
–
–
–
–
–
–
–
–
20.50
521
20.50
521
20.50
521
50
1270
58
1473
64
1626
58
1473
64
1626
72
1829
64
1626
72
1829
80
2032
26
660
30
762
33
838
30
762
33
838
37
940
33
838
37
940
41
1041
8.63
219
8.63
219
8.63
219
9.5
241
9.5
241
9.5
241
10.25
260
10.25
260
10.25
260
28
711
28
711
28
711
28
711
28
711
28
711
28
711
28
711
28
711
F
B
1. S
pecifications subject to change.
E
2. When ordering power rewind models, prefix model number with:
V-A = Air Rewind reels are supplied with control valve and 25" air hose.
V-EP =Electric Rewind (2/3 HP) 12v and 24v DC rewind reels are
supplied with switch and solenoid.
V-HD = Hydraulic Rewind reels are not supplied with control valve.
3. Be sure to check dimensions and weights prior to ordering.
C
G
NOTICE: A flexible connector must be used between the inlet pipe and
the inlet swivel joint.
***X, Y indicate mounting holes. See page 2.
H
Y
D
40"
1016
X
A
F
Series V-5100 and V-5200
B
E
C
G
H
X
A
F
hannay.com
[email protected]
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Series V-5300
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Y
D
40"
1016
Hannay Reels, Inc.
11
C
MANUAL OR POWER REWIND REELS
Series V-6000
G
H
To handle single 1" I.D. hose.
• Rugged, industrial-duty construction.
• Choose gear-driven crank rewind or chain and sprocket drive
powered by an electric, hydraulic or compressed air motor.
• Crank rewind reels supplied with pinion brake; power rewind reels
with a strap brake.
• Standard inlet: 90° #304 stainless steel ball bearing swivel joints,
1" female NPT threads.
• Standard outlet: 1" female NPT threads.
X
Y
• Standard inlet, outlet riser, and hub assembly are stainless steel.
Optional aluminum swivel joint is available.
• One-piece welded hub assembly.
A
D
• Optional rollers are available.
• Standard pressures to 1000 psi (69 bar).
• Temperatures from -40°F to +250°F (-40°C to +121°C).
F
E
• Chain guard available upon request, must be specified.
Electric rewind
Standard
configuration with
V-EPJ option shown
Optional Auxiliary Rewind
Ring and pinion shaft rewind unit
with removable crank handle.
12
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Optional Assembly
C2 roller top wind
and auxiliary rewind
shown
hannay.com
[email protected]
Y
D
MANUAL OR POWER REWIND REELS
Series V-6000
PARTS DRAWING – ISO 84
Hose Capacity of Reel
feet m
Model
Number
Approx. Weight
Crank Rewind
lb. kg
Reel Dimensions***
in. mm
see Note 4
For power rewind
see Note 5
I.D. in.
mm
O.D. in.
mm
V-6024-19-21
V-6032-19-21
V-6024-23-24
V-6030-23-24
V-6038-23-24
V-6016-25-26
V-6022-25-26
V-6028-25-26
V-6018-30-31
V-6024-30-31
V-6028-30-31
† V-6030-30-31
† V-6028-33-34
1
25
1-9/16
40
60
18
85
26
100
30
150
46
175
53
60
18
100
30
175
53
125
38
175
53
250
76
275
84
300
91
NET
SHIP
A
B
D
E
85
39
102
46
92
42
105
48
120
54
88
40
100
45
113
51
101
46
113
51
121
55
125
57
129
59
127
58
144
65
134
61
147
67
162
73
130
59
142
64
155
70
151
68
163
74
171
78
175
79
179
81
21
533
29.5
749
21
533
27.5
699
35
889
13
330
19
483
25.5
648
15
381
21
533
25.5
648
27.5
699
25
635
15.5
394
24
610
15.5
394
22
559
29.5
749
7.5
191
13.5
343
20
508
9.5
241
15.5
394
20
508
22
559
20
508
20.5
521
20.5
521
20.5
521
20.5
521
20.5
521
25.5
648
25.5
648
25.5
648
25.5
648
25.5
648
25.5
648
25.5
648
31.5
800
18.75
476
18.75
476
22.75
578
22.75
578
22.75
578
24.75
629
24.75
629
24.75
629
28.75
730
28.75
730
28.75
730
28.75
730
31.75
806
CRANK
F
POWER
F
G
H
X
Y
25.38
645
33.88
861
25.38
645
31.88
810
39.38
1000
17.38
441
23.38
594
29.88
759
19.38
492
25.38
645
29.88
759
31.88
810
29.62
752
30
762
38.5
978
30
762
36.5
927
44
1118
22
559
28
711
34.5
876
24
610
30
762
34.5
876
36.5
927
34.25
870
21.5
546
21.5
546
23.5
597
23.5
597
23.5
597
27.88
708
27.88
708
27.88
708
29.88
759
29.88
759
29.88
759
29.88
759
33.62
854
12.12
308
12.12
308
12.12
308
12.12
308
12.12
308
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
17.75
451
13
330
21.5
546
13
330
19.5
495
27
686
7.75
197
11
279
17.5
445
7
178
13
330
17.5
445
19.5
495
17.5
445
16.75
425
16.75
425
16.75
425
16.75
425
16.75
425
21.75
552
21.75
552
21.75
552
21.75
552
21.75
552
21.75
552
21.75
552
27.75
705
Notes:
1. S
pecifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown and with
disc sizes in other diameters.
3. Dimensions shown for reels up to and including 30-31 disc size reflect pressed frames.
All others are rollformed channel frames.
E
B
4. Weights shown in chart are for crank rewind models. Prefix model number with V-.
ADD these amounts for power rewind models:
Net lbs/kg Ship lbs/kg
40/18.1
Electric 1/2 HP 40/18.1
Hydraulic20/9.1
20/9.1
20/9.1
Air20/9.1
C
10.5"
267
5. When ordering power rewind models, replace prefix V- with:
V-A= Air Rewind–Supplied with control valve and 18" air hose.
V-EPJ=Explosion-Proof Electric Rewind (1/2 HP)–12v and 24v DC rewind reels
supplied with explosion-proof switch, solenoid, and junction box. 115v AC
rewind reels supplied with explosion-proof switch and junction box.
V-HD= Hydraulic Rewind–not supplied with control valve.
6. Finish: Refer to page 2.
G
H
X
Y
A
D
F
Power rewind shown
7. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
*** X, Y indicate mounting holes. See page 2.
† Some applications require a manual clutch/reduction unit (consult factory).
hannay.com
[email protected]
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
13
C
SPRING REWIND REELS
Series N600
G
Dual
Hose
• Deadman/Sensing
H
To handle dual 1/4" through 3/8" I.D. sensing hose.
• Narrow frame and compact mounting base.
• Non-sparking ratchet assembly.
• Declutching arbor to prevent damage from reverse winding.
• Standard inlets: 90° balanced pressure swivel joints,
1/2" female NPT threads.
• Standard outlets: 1/2" female NPT threads.
• Standard pressures to 3000 psi (207 bar).
X
Y
A
D
• Temperatures from -60°F to +250°F (-51°C to +121°C).
• Consult factory for other pressures and temperatures.
• 4-way roller assembly.
F
Standard
configuration
shown
PARTS DRAWING – ISO 80
Hose Capacity of Reel
feet m
Model
Number
I.D. in.
mm
O.D. in.
mm
1/4
6
5/8
16
2/50
2/15
2/100
2/31
N617-19-20-10.5J
N617-23-24-10.5G
3/8
10
3/4
19
2/50
2/15
2/100
2/31
Approx. Weight
lb. kg
NET
UPS/
FedEx
SHIP
Wt.
66
30
73
33
84*
38
84*
38
Freight
SHIP
Wt.
101
46
108
49
Standard
Roller
Assy.
N205
N205
Reel Dimensions***
in. mm
A
B
C
E
F
G
H
X
11
279
11
279
5
127
5
127
10.5
267
10.5
267
20.75
527
23.75
603
13.75
349
13.75
349
20
508
24
610
10.62
270
12.62
321
9
229
9
229
Notes:
E
B
A hose stop is necessary to keep spring from unwinding.
1. Specifications subject to change.
2. Reel models and capacities shown are for standard drag applications; for vertical lift applications,
consult factory.
3. Other sizes, from standard components, available on request.
4. Finish: Refer to page 2.
C
5. Be sure to check dimensions and weights prior to ordering.
G
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
H
*Dimensional weight may apply when shipped as a parcel package (via FedEx or UPS Ground).
*** X, Y indicate mounting holes. See page 2.
Y
10
254
D
12
305
X
Available Roller
Positions
A
F
SR (STD)
14
Hannay Reels, Inc.
VR (OPT)
TR (OPT)
Phone: 518-797-3791
Toll Free: 1-877-467-3357
TR (Wallmount)
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
[email protected]
E
Y
SPRING REWIND REELS
Series V-N800
To handle 1" I.D. hose.
• Narrow frame and compact mounting base.
• Non-sparking ratchet assembly.
• Declutching arbor to prevent damage from reverse winding.
• #304 stainless steel internals.
• Standard inlet: 90° #304 stainless steel ball bearing swivel joint,
1" female NPT threads.
• Standard outlet: 1" female NPT threads.
• Standard pressures to 1000 psi (69 bar).
• Temperatures from -40°F to +250°F (-40°C to +121°C).
• 4-way roller assembly.
D
Optional TR roller
position shown
PARTS DRAWING – ISO 81
Hose Capacity of Reel
feet m
Model
Number
I.D. in.
mm
O.D. in.
mm
V-N816-25-26-10.5B
V-N818-25-26-10.5B
1
25
1-9/16
40
35
11
50
15
Approx. Weight
lb. kg
NET
Freight
SHIP
Wt.
96
44
102
46
131
59
137
62
Reel Dimensions***
in. mm
Standard
Roller Assy.
N204
N206
A
B
C
E
F
G
H
X
10
254
12
305
4
102
6
152
10.5
267
10.5
267
25.25
641
25.25
641
14.25
362
16.25
413
26
660
26
660
13.62
346
13.62
346
8
203
10
254
Notes:
B
A hose stop is necessary to keep spring from unwinding.
E
1. Specifications subject to change.
2. Reel models and capacities shown are for standard drag applications; for vertical lift
applications, consult factory.
3. Other sizes, from standard components, available on request.
4. Finish: Refer to page 2.
C
G
5. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
H
*** X, Y indicate mounting holes. See page 2.
X
Available Roller
Positions
A
F
SR (STD)
VR (OPT)
hannay.com
[email protected]
TR (OPT)
TR (Wallmount)
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Y
10
254
D
12
305
Hannay Reels, Inc.
15
C
SPRING REWIND REELS
G
SeriesV-800
H
To handle 1" I.D. hose.
• Rollformed channel frame construction.
• Non-sparking ratchet assembly.
• Declutching arbor to prevent damage from reverse winding.
• #304 stainless steel internals.
• Standard inlet: 90° #304 stainless steel ball bearing swivel joint,
1" female NPT threads.
• Standard outlet: 1" female NPT threads.
X
Y
A
D
• Standard pressures to 1000 psi (69 bar).
• Temperatures from -40°F to +250°F (-40°C to +121°C).
• 4-way roller assembly.
F
Standard
configuration
shown
PARTS DRAWING – ISO 42
Model
Number
Hose Capacity of
Reel
feet m
Approx. Weight
lb. kg
I.D. in.
mm
O.D. in.
mm
NET
SHIP
96
44
102
46
131
59
137
62
145
66
131
59
137
62
166
75
172
78
180
82
V-816-25-26-10.5B
V-818-25-26-10.5B
V-820-25-26-10.5A
V-820-30-31-10.5A
V-820-30-31-15.5A
1
25
1-9/16
40
35
11
50
15
75
23
100
30
–
–
Reel Dimensions***
in. mm
Standard
Roller Assy.
R204
R206
R308
R308
R308
A
B
C
D
E
F
G
H
X
Y
9.25
235
11.25
286
13.25
337
13.25
337
13.25
337
4
102
6
152
8
203
8
203
8
203
10.5
267
10.5
267
10.5
267
10.5
267
15.5
394
25
635
25
635
25
635
28.5
724
28.5
724
26.12
663
26.12
663
27
686
30.5
775
30.5
775
14.75
375
16.75
425
19.5
495
19.5
495
19.5
495
25.88
657
25.88
657
25.88
657
31.38
797
31.38
797
13.5
343
13.5
343
13.5
343
17
432
17
432
4.5
114
6.5
165
8.5
216
8.5
216
8.5
216
21.75
552
21.75
552
21.75
552
25.25
641
25.25
641
Notes:
B
A hose stop is necessary to keep spring from unwinding.
1. Specifications subject to change.
2. Reel models and capacities shown are for standard drag applications; for vertical lift
applications, consult factory.
3. Other sizes, from standard components, available on request.
C
4. Finish: Refer to page 2.
G
5. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
H
*** X, Y indicate mounting holes. See page 2.
D
A
SR (STD)
16
Y
X
Available Roller
Positions
Hannay Reels, Inc.
VR (OPT)
TR (OPT)
Phone: 518-797-3791
Toll Free: 1-877-467-3357
TR (Wallmount)
F
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
E
hannay.com
[email protected]
E
SPRING REWIND REELS
Series V-900
To handle 1-1/4" or 1-1/2" I.D. hose.
• Rollformed channel frame construction.
• Non-sparking ratchet assembly.
• Declutching arbor to prevent damage from reverse winding.
• Standard inlet, outlet riser and hub assembly are aluminum
for jet fuels.
• Standard inlet: 90° swivel joint, 1-1/2" female NPT threads,
and 2" Victaulic groove.
Y
• Standard outlet: 1-1/2" female NPT threads.
D
• Temperatures from -25°F to +250°F (-32°C to +121°C).
• Consult factory for other sizes and/or threads.
• Standard pressures to 600 psi (41 bar).
• Consult factory for other pressures and temperatures.
• 4-way roller assembly.
Standard
configuration
shown
PARTS DRAWING – ISO 29
Hose Capacity of Reel
feet m
Model
Number
I.D. in.
mm
O.D. in.
mm
1-1/4
32
1-13/16
46
40
12
50
15
75
23
V-922-23-24B
V-920-25-26A
V-922-30-31A
Approx. Weight
lb. kg
Reel Dimensions***
in. mm
Standard
Roller Assy.
1-1/2
38
2-1/16
52
25
8
40
12
50
15
NET
SHIP
104
47
127
58
156
71
139
63
162
73
191
87
R310
R308
R310
A
B
D
E
F
G
H
X
Y
15.25
387
13.25
337
15.25
387
10
254
8
203
10
254
23.25
591
25
635
28.5
724
25.25
641
27
686
30.5
775
24
610
22.75
578
­24.75
­629
23.88
607
25.88
657
31.38
797
12.5
318
13.5
343
17
432
10.5
267
8.5
216
10.5
267
20
508
21.75
552
25.25
641
Notes:
B
A hose stop is necessary to keep spring from unwinding.
1. Specifications subject to change.
2. Reel models and capacities shown are for standard drag applications; for vertical lift applications,
consult factory.
3. Other sizes, from standard components, available on request.
C
10.5
267
4. Finish: Refer to page 2.
5. Be sure to check dimensions and weights prior to ordering.
G
NOTICE: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
H
*** X, Y indicate mounting holes. See page 2.
Available Roller
Positions
X
Y
A
D
F
SR (STD)
VR (OPT)
hannay.com
[email protected]
TR (OPT)
E
TR (Wallmount)
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
17
C
GROUNDING REELS
G
Static Grounding Reels
WARNING
• Aircraft Refueling
These reels are for static grounding ONLY.
NOT intended for lightning protection!
H
For refueling or hazardous areas.
• These reels bond and/or ground aircraft,
fuel trucks, and other equipment.
• Declutching arbor and adjustable guide
arm with cable guide.
• P­rovide smooth operation and require
minimum cable pull.
• Optional stainless steel construction of
spool, frame, and ratchet system available
on HGR Series.
• Standard finish is oven-cured enamel.
• Also available, manual rewind version.
X
Y
A
D
F
Model HGR50
E
Model SSHGR50
(Shown with optional “Y” branch)
(Optional unpolished stainless steel HGR50)
Model HGR100
Model MHGR100
Model MHGR50
Model GR75
All reels shown with optional pcc cable and clamp.
18
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
[email protected]
Model MGR75
Y
D
GROUNDING REELS
Series GR/HGR
• Available with 1/8", 7 x 19 galvanized carbon
steel cable.
Series GR75
• Sealed spring is a good economical choice that’s compact and lightweight.
• 100 amp Alligator clamp.
• Stainless steel or plastic-covered cable and “Y”
branches are available at an additional charge.
Series HGR
• Cable guide arm of cast aluminum
and ZA-12 aluminum zinc alloy.
• Reels are repairable and parts are readily available.
• A non-sparking ratchet assembly.
• Supplied with 18" long grounding strap with eyelet connectors on both ends.
Parts Drawings: HGR Series – ISO 10 and MHGR Series – ISO 234
Model
Number
Approx. Weight
lb. kg
Cable
Capacity
of Reel
feet m
75
23
75†
23†
75
23
125†
38†
100
30
175†
53†
GR75
†MGR75
HGR50
†MHGR50
HGR100
†MHGR100
Reel Dimensions***
in. mm
Without
Cable
With
Cable
A
B
C
D
E
F
G
H
X
Y
11
5
11
5
28
13
19
9
37
17
25
11
14*
6
13*
6
30*
14
23*
10
41*
19
31*
14
2
51
2
51
4
102
4
102
4
102
4
102
2
51
2
51
1.25
32
1.25
32
1.25
32
1.25
32
7
178
7
178
10.75
273
10.75
273
13.25
337
13.25
337
9
229
9
229
11.5
292
11.5
292
11.5
292
11.5
292
9.25
235
9.25
235
14.25
362
14.25
362
16.75
425
16.75
425
3.5
89
5.25
133
5.5
159
6.25
159
5.5
140
6.25
159
9.88
251
9.88
251
16.75
425
16.75
425
17.75
451
17.75
451
5.06
129
5.06
129
8.88
226
8.88
226
8.88
226
8.88
226
1
25
1
25
2.38
60
2.38
60
2.38
60
2.38
60
7.88
200
7.88
200
7.5
191
7.5
191
7.5
191
7.5
191
B
Optional Grounding Jack
per MIL-C-8341D/4
Part No. 9951.0033
Optional Browne Clamp
(ALS-10)
Part No. 9951.0031
E
G
C
H
Notes:
1. Specifications subject to change.
2. When ordering, specify model number, gauge, O.D., length, and coating
if required.
Y
X
3. Specify “Y” branch if required.
A
4. Finish: Refer to page 2.
F
*Reels can be shipped as a parcel package (via FedEx or UPS Ground).
Model GR75/MGR75 – GR75 shown
*** X, Y indicate mounting holes. See page 2.
D
F
† Capacities shown are for PCC (plastic coated cable). Capacities may be
higher for uncoated cable; consult factory.
B
C
E
G
H
X
Y
A
D
Model HGR50/HGR100/MHGR50 – HGR shown
hannay.com
[email protected]
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
19
You Can’t Buy A Better Reel.
Find reels for every need.
Choose the reels proven in airports
around the world.
The quality of our heavy-duty, handcrafted reels has made Hannay Reels the #1
choice of aviation OEMs. Available for countless applications, our reels fit worldwide
specs, yet are individually designed and built to meet your specific requirements.
Whether in the hangar or on the field, you can rely on our reels to improve
productivity, increase safety, and keep your operation running smoothly.
You Can’t Buy A Better Reel.
You Can’t Buy A Better Reel.
Industrial Hose Reels
| Washdown | Chemical Transfer | Potable Water | Food Processing | Bottling Plants |
| Pharmaceuticals & Cosmetics | Fueling | Fire Protection | Dairy Operations |
Cable Reels
| Rescue and HazMat Operations | Agriculture | Grounds Maintenance and MRO | Electric Tools |
| Portable Lighting | Broadcast/Entertainment | Auxiliary Leads for Power Generation |
| Hoist and Crane Operations | Static Grounding | Utility Grounding | Video Inspection |
Uses:
• Washdown and
potable water
• Hydrant and mobile
refueling
• Aircraft servicing and
maintenance
• Sensing and grounding
• Firefighting and rescue
• Aircraft de-icing
• Pressurized air/nitrogen
• Video inspection
• DEF for service vehicles
You Can’t Buy
A Better Reel.
Family owned and operated since 1933
You Can’t Buy
A Better Reel.
Family owned and operated since 1933
Industrial
Hose Reels
Cable Reels
Includes specs and
information on:
• High pressure spring
rewind reels
• Compact manual
rewind reels
• Power rewind reels
• Portable storage reels
• Hose assemblies
Find out more about:
• Manual and power
rewind reels
• Storage reels
• Reels for live
electric cable
• Portable reels
• Static and truck
grounding reels
View all our reel
catalogs online at
hannay.com
Family owned and operated
since 1933, Hannay Reels is the
world leader in both OEM and
aftermarket applications. Hannay
offers thousands of standard hose
reel and cable reel models, as well
as unmatched custom capabilities.
We can easily and affordably
customize a reel to meet your
exact specifications – built to
last, delivered fast. Additional
catalogs are available through
your local Hannay Reels dealer
or online at hannay.com.
553 State Route 143 | Westerlo, New York 12193
Email: [email protected] |
Phone: 518-797-3791
Toll Free: 1-877-467-3357
hannay.com
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
All Hannay reels are constructed of
quality heavy gauge steel (optional
aluminum or stainless steel also
available on most models).
Form H-0418-AVIA REV WEB 6-15
MADE IN U.S.A.

Similar documents

hose reels catalogue - ReelTech Hose Reels

hose reels catalogue - ReelTech Hose Reels and/or Accessories Order Form when specifying reels with us. These forms can be found in our Ordering and Accessory Guide, H-0415-OA. Be sure to include any size and/or weight limitations for your ...

More information