- WORLDPAC

Transcription

- WORLDPAC

2008
Tools &Equipment
In The Manufacturer’s Spotlight
Prices Good October 6 - December 31, 2008 (US Only)
Special OE Level Diagnostics Promo
Offer! Promotion includes the F00K108106
$7590
NEW!
BIG!
2008 London Leasing will offer WORLDPAC®
customers a... Deferred Payment Plan
Customer’s will pay the normal initial payment at
lease signing. After that the first regular monthly
payment will not become due until February 15,
2009. Now is the time to gear-up your shop
before year-end.
Lease $188.44/mo. 60 months
See p.2 for London Leasing details.
NEW!
Pegisys™ Diagnostic System
Automotive Digital Multimeters
Providing Information Bandwidth at the Fender
True RMS Digital Multimeter
> Touch Screen Selection
> SpeedScroll™ Keypad Control
> Wireless Vehicle Connection
> Internet Connectivity
> High Speed 2-Channel Scope
> Audio & Video Capability
> 1980-2007 Coverage
True RMS digital multimeter with temperature and
backlight. Frequency to 40 MHz,temperature to
1832°F, capacitance to 4000 µF. 1000 V/750 V dc/ac.
10 Amps ac/dc, fully safety fused. Resistance to 40 MΩ.
Continuity beeper.Input warning tone when test leads
are in wrong jack.
Pegisys™ provides coverage
for 44 different vehicle makes
from over 25 different mfgs.
Kit includes; USA Domestic/
Asian Vehicle Subscription
(18 Months), Pathfinder™,
InfoTech, and Repair-Trac
diagnostic information.
Vehicle cable sets;
OBD II cable, USA
Domestic OEM
OBD I cables, USA Asian
OEM OBD I cables.
Accessories; Pegisys™
carrying case, OEM OBD I
cable carrying case,
AirBridge™ wireless kit,
100 – 240 Volt power supply
and Scope accessory kit.
Automotive Multimeter
3825
$4995
Special
Offer!
34XRA
Test Drive and
become Pegisys
certified online
@ pegisysotc.com.
Pegisys AirBridge™ Wireless
Technology features high
speed WiFi Digital Input /
Output (SDIO) 802.11b/g.
$113
Performs all standard electrical test for on-car and
bench troubleshooting. Tests engine RPM and dwell.
Capacitance, Frequency and Temperature.
Measures DC/AC voltage, DC/AC current,
resistance, diodes and continuity beeper,
duty cycle.
AU92
34XRA
$149
AC/DC Digital Clamp-On
Auto and manual ranging. Relative zero
mode. Auto power off. MAX capture function
for in-rush current measurements (30 mS
response). Large, easy to read LCD display.
ACDC-100
$113
ACDC-100
See p.2-5
for additional OTC Diagnostic Tools
TPMS Scan and Test Promotion Kit
Available for a limited time only. Included in this package is the OTC 3870
TPMS Scan Tool with OBD II Smart Cable, soft carrying case, and the OTC
TIPS003A TPM Reset Tool. This OTC offer is valid from May 15th through
December 31st, 2008. The 3870 features simple control buttons
with hot keys for fast operation. Color
LED’s indicating power and vehicle
communication. English, Spanish &
French menu language support.
Removable Flash media slot. Smart
Cable included. Field expandable
with support for future OEM optical
communications protocols.
3870P
rred
With defe until
ts
n
e
m
y
pa
, 2009!
February
For leases completed in October & November,
Over components purchased separately.
4QTR08BSD
EXCEPT WHERE NOTED
LEASE
NEW!
Mastertech VCI with Asian and Domestic Software
Subscriptions, the 01002398 TECH 2 Pro with CANdi
Module, and the MMD 540H Hybrid Multimeter. As an
added bonus, you may add 32 MB PCMCIA cards to
your order for $325.00 each, normally $499.00 each,
limited to 5 additional cards per order.
Save $1,970.00
FREE DELIVERY!
$1399
NEW!
1/2” Drive Impact Socket Sets
14-Piece Metric Std.
Impact Socket Set
Set includes: 10mm, 11mm, 12mm,
13mm, 14mm, 15mm, 16mm,
17mm, 18mm, 19mm, 21mm,
22mm, 26mm and 27mm std.
sockets and blow molded case.
2652
$41.95
14-Piece Metric Deep
Impact Socket Set
Set includes: 10mm, 11mm,
12mm, 13mm, 14mm, 15mm,
16mm, 17mm, 18mm, 19mm,
21mm, 22mm, 26mm and 27mm
deep sockets and blow molded case.
2653
$67.95
SPX is giving away a brand NEW Harley!
Buy Genisys™, America’s best scan tool, and get a $100 Cash Card
and a chance to win a new Harley-Davidson®, America’s best motorcycle.
Qualifying Kits: 3618, 3620, 3696, 3699, 3860, 3618CQ, (see p. 2 & 3)
After purchasing a Qualifying kit, Send in the included coupon to SPX and you will relieve a $100 Cash Card
from SPX. (details on coupon). Go online to http://cashscanandridecontest.com to fill out the questionnaire to be
entered in the Harley-Davidson®, America’s best motorcycle drawing. (Requires qualifying coupon entry form to
be received by SPX). Effective May 15th - Dec. 31, 2008.
For Leasing Information Contact London Leasing 800-691-7833
AU92
To Order Call...
800-999-9982
Your dedicated and knowledgeable
WORLDPAC sales associate will answer
all your questions and help you
through the order process.
1
To Order Call... 800-999-9982
Index
Genisys™ Deluxe Kit with 2007 Smart Cable
A/C/Cooling Service . . . . . . . . . . . . . . 8, 16
Air Compressors . . . . . . . . . . . . . . . . 11, 12
Air Hose/Reels . . . . . . . . . . . . . . . . . . . . 11
Air Tools . . . . . . . . . . . . . . . . . . . . . . . 10, 11
Battery Service . . . . . . . . . . . . . . . . . . . 1, 5
Brake Service . . . . . . . . . . . . . . . . . . . . . .13
Diagnostic/Electronics . . . . . . . .1, 2, 3, 4, 5
Hand Tools . . . . . . . . . . . . . . . . . . . . . . .1, 10
Headlamp Alignment . . . . . . . . . . . . . .1, 12
Lifting . . . . . . . . . . . . . . . . . . . . . . 12, 15, 16
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Oil/Lube . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Pressure Washer . . . . . . . . . . . . . . . . . . . 12
Service Systems . . . . . . . . . . . . . . . . . . . . 8
Shop Heaters . . . . . . . . . . . . . . . . . . . . . . 16
Specialty Tools . . . . . . . . . . . . . . 5, 6, 7, 13
Tire Service . . . . . . . . . . . . . . . . . . . . 14, 15
TPMS Service . . . . . . . . . . . . . . . . . . . . . . . 4
Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Wheel Alignment . . . . . . . . . . . . . . . . . . . 12
If you want it,
here's an easy way to pay for it...
How about a NEW Genisys™with Updates and a 3-Year Warranty?
FREE!
With OTC 3860 Purchase
Includes Free 2 Month
Subscription to
Web Based Repair
Information Database.
FREE!
Coupon for 2008 Domestic, Asian and ABS software
$258.00 Value
updates from OTC with purchase of an OTC 3680, 3696,
3618CQ or 3699 Genisys™ Kit
3860
$1745
3699
$1645
Genisys Scope and Gas Modules
2006 Genisys Scope Module with 2006 InfoTech Software
Genisys™ Deluxe Kit with ABS Cables
Includes all the contents of the 3860 Kit plus...USA 2004
ABS/Air Bag software and ABS/Air Bag vehicle-specific
cables.(USA Asian OBD I cables not included;see Kit No. 3421-94).
Includes the Genisys 4-channel Lab Scope Module with
4 DMM leads, ground lead, kV conventional ignition lead,
GM HEI ignition adapter, ignition
sync lead, manual, InfoTech repair
information software Smart Card,
and carrying case. (Requires Genisys
System 2.0 see 3421-84)
3688
$1389
Genisys Performance Gas Module
Includes: hose probe, Gas M-P
software, Smart Card, filters and
manual. Exhaust analysis with
computer scan based testing.
Covers emissionrelated diagnosis.
Advanced gas diagnostics for
ability to test for
mechanical failures.
Molded case.
Sales Policy
3780
3696
$1845
$2699
Genisys Professional Complete Kits with Scope and Gas Modules
Genisys™Professional Package
3618 Genisys Deluxe Asian and Domestic and
2007 Scan & Scope Kit with 2007 Smart Cable
3421-62 Genisys USB Update & Memory Tool
3421-54 ABS Specific Bi-directional Cable Kit
3421-94 Asian OBD I Cable Kit
3421-74 European Starter Kit
3421-28 4-Hours of On-Site Training
Multi-Language: English, Spanish, French
The 3618 includes Genisys™ scan tool, OBD II Smart Cable, Automated
System Test™, USA 2007 Domestic software with Pathfinder™, RepairTrac™, Fast Fixes™, USA 2007 Asian software, InfoTech 2006 software,
USA 2004 ABS/Air Bag software, manuals, adapters, domestic OBD I
vehicle cables (for GM, Ford, Chrysler, Jeep, Saturn), 4-channel lab
scope module with 4 DMM leads, ground lead, kV conventional ignition
lead, GM HEI ignition adapter, ignition sync lead, manuals, Smart Cards,
and carrying case. (USA Asian OBD I cables not
included; see Kit No.3421-94.)
(USA ABS/Air Bag cables
not included; see Kit
No. 3421-54.)
See individual part number descriptions for details.
To Order Call...
800-999-9982
Your dedicated and
knowledgeable
WORLDPAC sales
associate will answer
all your questions
and help you
through the
order process.
3618CQ
$4995
SAVE!
$1628*
*On Kit Components
if Purchased
Separately.
ABS BRAKESCAN
Displays ABS trouble codes and definitions. Coverage for OBD II domestic vehicles
1996 and newer (GM, Ford & Chrysler). Plugs into OBD II port. Diagnoses: speed
sensors, ABS solenoids, brake control modules, ABS pump
CP9449
motor, brake switch and more.
$249
2
FREE!
Return your used Genisys™ tool to OTC to
receive FREE InfoTech 2006 and ConnecTech PC software kits; send
in any scan tool and receive FREE InfoTech 2006 software kit.
Includes Genisys™ scan tool, OBD II Smart Cable,
Automated System Test™, USA 2007 Domestic software
with Pathfinder™, Repair-Trac™, Fast Fixes™, USA 2007
Asian, USA 2004 ABS/Air Bag software, InfoTech 2006
software, manuals, adapters, domestic OBD I vehicle cables
(for GM, Ford, Chrysler, Jeep, Saturn), Smart Cards, and
carrying case. (USA Asian OBD I cables not included; see Kit No. 3421-94.)
(USA ABS/Air Bag cables not included; see Kit No. 3421-54.)
800-691-7833
PRICES GOOD IN THE US ONLY.
(USA Domestic OBD I cables not included; see Kit No. 3421-70.)
(USA Asian OBD I cables not included; see Kit No. 3421-94.)
(USA ABS/Air Bag cables not included; see Kit No. 3421-54.)
Genisys™ USA 2007 Deluxe Kit
Leasing Information
Occasionally, an advertised item may not
be available because of sales above
anticipated demand, or because of
circumstances beyond our control. With
your approval, we reserve the right to
substitute items of equal or better value in
the event our stock of advertised products
becomes depleted. Prices may vary with
different styles and/or models. Orders
under $75.00 may incur additional delivery
charges. Additional delivery charges may
may also be incurred in Alaska and
Hawaii. Errors in prices, descriptions
and/or illustrations are not the responsibility
of WORLDPAC, Inc. Certain end user
rebates do not apply on sales to government
agencies.
System 3.0 and new OBD II Smart Cable, USA 2007 Domestic with
Pathfinder, USA 2007 Asian with Pathfinder, ABS/Airbag 2004 are
authorized and ready to work.
Already own a Genisys™ 5-Gas kit? No problem a new
smart card is included. Bonus offer - free software
exchanged for your old tool or adapter. (See below for details).
No code readers accepted. Coupon included for the exchange offers.
(Allow 6 to 8 weeks for delivery).
SAVE Cash or Bank Credit for Other Needs
100% Financing • Low Monthly Payments
You Own the Equipment at Lease End!
WORLDPAC offers monthly rates on
many items in this catalog for “businesses
only.” Credit worthy customers may
take advantage of competitive rates
through WORLDPAC. There is a $1,000
minimum, but items can be bundled to
reach minimum. Hand tools cannot be
purchased by lease unless bundled with
storage units or other hard goods.
Terms are available from 24 through 60
months, depending on lease value. All
leases require (1) payment up front and a
$75.00 documentation fee to start the
lease. Leasing is not available in
Arkansas. Contact WORLDPAC for
additional details, or call
LONDON Leasing at:
Genisys™ Starter/Exchange Kit
FREE DELIVERY!
Genisys Software & Accessories
Genisys™ Software 4-Pack
NEW!
Software pack includes: 3421-95 USA
2007 Domestic Software Update Kit,
3421-96 System 3.0 Memory Expansion
Kit, 3421-98 Asian Software
Update Kit and the
3421-83 InfoTech
2006 Software
Update Kit.
3421-103
USA 2007 Domestic Software Update Kit
This OBD II Smart Cable compatible update kit
includes expanded vehicle coverage, Pathfinder
troubleshooting with Repair-Trac™, Fast fixes™,
Automated System Test™, Quick DTC Scan, Smart
Card, manual, ConnecTech Reader, and the NGIS
Windows-based program CD for downloading
software updates.
This powerful kit maximizes technician productivity
with the 3 most popular Genisys™ options —
OBD II Smart Cable, USA 2007 Domestic software,
and USA 2007 Asian software. Each software
application includes the
new Automated System
Test™ feature.
3421-100
$369
(System 2.0 or newer
required to install;
see No. 3421-97).
$299
(System 2.0 or newer
required to install; see No. 3421-97).
2006 Genisys InfoTech Software
InfoTech software provides the key information
to take a vehicle-specific symptom or fault code
to a fast and accurate repair. The kit includes
InfoTech 2006 Smart Card, manual, and a
Windows-based program CD
for downloading
software updates.
3421-83
$4 49
(System 2.0 or newer required to install; see No. 3421-97).
2007 System 3.0 Starter Kit
For Genisys™owners that do not have System 2.0.
Kit includes the System 3.0 software, a new highspeed commercial grade
1 GB “super card”,
NGIS CD, card
reader, and
compact flash cover
for your scan tool.
$249
$100
This OBD II Smart Cable compatible update kit
is for Genisys™ owners who already have the
Asian 2003 and newer starter kits and want to
update software coverage to 2007. Asian 2007
includes the new Automated System Test™ feature.
Kit includes the NGIS software
CD, manual, and
Smart Card.
3421-98
System 2.0 or
newer required to
install; see No. 3421-97.
This starter kit allows you to service: Audi, BMW,
Mercedes-Benz, Volvo, Volkswagen, and
more. Kit includes software CD, Smart Card,
Mercedes 38-pin cable, Mercedes 1-pin cable,
Mercedes 38-pin SSI, BMW cable, and
Volkswagen/Audi cable.
Has the combined power of over
50 System Smart inserts
and provides improved
test capability and
accuracy.
3421-88
3421-97
USA 2007 Asian Software Update Kit
2005 European Starter Kit
2007 Genisys OBD II Smart Cable
Cash Card - FREE from OTC with purchase
of the 3421-97 and (1) of 3421-100, 3421-95,
3421-98, 3421-74, or 3421-73.
$569
2005 European Software Update
This kit is for Genisys owners who already have
European 2003 and want to update coverage
to 2005. Kit includes
European Smart Card,
manual, and CD.
(System 2.0 or newer required
to install; see No. 3421-97).
(The BMW cable and Mercedes
38-pin SSI must be purchased separately, see 3421-77.)
3421-73
Use to remove
the air bag
module
from the
steering
wheel.
Ford 2000-2004 Taurus/Sable,
1999-2003 Windstar Van.
GM 1999-2005 Chevrolet Impala,
Lumina, Monte Carlo, Venture, Pontiac Bonneville, Grand Prix, Montana, Buick
LeSabre, Century, Regal, Olds Intrigue, Cadillac El Dorado, Deville, STS, SLS.
Mercedes-Benz Models 107,123, 124, 126, 129, 140, 163, 164, 170,201, 202,
203, 208, 209, 210, 211, 215, 219, 220, 221 and 463.
5945
$62.95
Additional Delivery
Charges May Apply.
SOLARITY 4-Channel Scope
$4 49
Provides all the
key information
you need at your fingertips for a fast
and accurate repair. Includes 4 DMM leads,
ground lead, kV ignition lead, ignition sync lead,
HEI adapter, manual, InfoTech smart card and carry
case. (3852MT Master Kit also available.)
3852
$2189
SOLARITY Performance 5 Gas Analyzer
European Incremental Cable Kit
For owners of European 2003 software and
cables, used with the
3421-73 to upgrade
their hardware and
software to the 2005
kit level. Contains the
new BMW cable and
Mercedes 38 Pin SSI.
3421-77
On-screen definitions of generic and manufacturer
specific trouble codes for All Vehicles 1996 and Newer.
Readiness test status for emissions testing. Reset
check engine lights. Auto protocol selection. Free
internet updates (requires EZ-Update 400 software)
MIL status indicator. Summary screen of vehicle
emissions system. Supports multiple trouble code
requests: current, pending, & freeze codes.
CAN Capable!
CodeScout™2500 OBD I Domestic and OBD-II Code
Scanner Software updatable via Internet (cables
sold separately). Retains the mostrecently scanned
vehicle’s data and configuration. OBD-II code
library built-in the tool. Review vehicle scan history
(OBD-II codes). Dual language tool: English and
Spanish language option. Export data to a PC
(cable sold separately). Battery powered for review
of data off vehicle (batteries included). Low battery indicator.
AX2500
Air Bag Release Tool Kit
Includes
2006
InfoTech
Software
3421-74
CodeScout™1500 OBD-II Code Reader
$149
$299
(System 2.0 or
newer required
toinstall; see
No. 3421-97).
$215
OBD Readers/Scanners
AX1500
Includes four System Smart inserts, ABS-specific
cables. Required for enhanced ABS data stream
and bi-directional testing.
3421-54
System 2.0 or
newer required to
install; see No. 3421-97.
$369
$749
Genisys ABS/Air Bag Cable Kit
3421-95
$919
Genisys™ 2007 Super Bundle Productivity Kit
EXCEPT WHERE NOTED
$199
EZ-SCAN™ Scanner OBD-I and OBD-II
Scan Tool Includes all OBD-II Protocols
On screen definitions of OBD-I
trouble-codes, OBD-II generic codes,
and OBD-II manufacturer specific
codes. Customize data views. Internet
upgradeable. Vehicle Coverage: GM ’82 Current Year (12-pin and 16-pin ALDL and OBD-II).
Enhanced vehicle data for GM,
Ford, Chrysler and Toyota.
Ford ’83 - Current Year
(EEC IV & OBD-II). Chrysler ’83 Current Year (SCI and OBD-II).
Jeep ’91 - Current Year (SCI and
OBD II). Includes1996 Current
Year (OBD II). 1996 through
Current European and Asian all
makes coverage with OBD-II
generic.
AX6000
$489
CAN Capable!
The Solarity emissions repair solution kit includes
Solarity, with plug-in 5-Gas Analyzer Module,
hoses, exhaust probe, power cable and battery
adapter, RS232 cable, AC power supply, Smart
Card, Gas M-P software CD, filters, manual, and
carrying case.
3855
$3895
OTC READY SCAN™ Readiness Monitor Tool
A drive cycle is required after any
emissions related repair. The 3358
OTC READY SCAN™ eliminates drive cycle
guesswork by notifying any driver, or your
customer - with color coded LEDs and a built-in
speaker that the drive cycle has been completed
and the vehicle is Ready.
3358
$129
OBD II DLC
Connector
Status
LEDs
USB Port
Serial Port
3
To Order Call... 800-999-9982
MasterTech VCI
MTS 3100 Mastertech
MTS 5200 Engine Analyzer
Vehicle Communications Interface
Designed specifically to
support the new and emerging
vehicle communication
networks of the future by
using multi-tasking protocols,
allowing techniciansto interface
more than one vehicle system
at a time. It performs
conventional scan tool
functionalityon a number of
Domestic and Asian vehicles.
The MasterTech VCI is the first
tool in the after-market to incorporate
vehicle diagnostics, J2534, and the new
D-PDU API architecture. The tool uses the Bosch
Shop Foreman Pro Windows-based software
application, and communicates via Ethernet, USB,
or wireless connection. The Mastertech VCI was
awarded the prestigious 2007 Motor Top 20
Tools Award for innovation.
Base Kit F00K108106
$2595
Features superior
scan diagnostics
with an automotive
scope and digital
meter – and comes
kitted with software
and all cables,
and adapters.
Toyota/Honda OE Kit
This kit gives you
Powertrain, Body,
and Chassis coverage,
including ABS, Airbag,
and more.
01002876
MTS 5200 DSO & DVOM Base Analyzer Kit
Includes everything you need for the Graphing
Multimeter/DVOM and 4-Channel Oscilloscope.
01002878
$3290
$4595
Requires software purchase, sold separately below.
Asian Region Kit
F00E900063
Domestic Region Kit
F00E900062
Your choice:
KTS 570 Interface Module
KTS 200
$995
European Vehicle Diagnostics
Domestic & Asian Region Kit - F00E900064
$1790
TECH 2
The Complete
GM Solution
The TECH 2 provides
the most comprehensive diagnostic
coverage for
late model GM
vehicles and supports
on-board diagnostics
and full bi-directional
control when performing
powertrain, chassis and
body diagnostics.
01002668
Convenient PC – based interface module that
WIRELESSLY connects your shop PC or laptop to
a vehicle. Extensive coverage for VW, Audi,
Mercedes-Benz, BMW, Volvo, Sprinter, Toyota, Nissan,
Hyundai, Kia, Honda, and more. Built in 2-Channel
Multimeter and Oscilloscope for additional
flexibility and power.
Base Kit F00K104992
$4295
$1595
Additional software subscriptions can be purchased at
KTS 570 ESItronic A C12
1-Year Subscription European
F00E900093
Starter Kit - Includes the
Current load of NAO
software.
acdelcotechconnect.com
Pro Kit - This kit includes a
CANdi module, SATURN reprogramming
adapter and the current load of NAO software.
Your choice:
01002398
$4995
Easy-to-use, fast, and comprehensive embedded
scan tool for European and Asian vehicle
diagnostics. Extensive coverage for VW, Audi,
Mercedes-Benz, BMW, Volvo, Sprinter, Toyota, Nissan,
Hyundai, Kia, Honda and more.
The KTS is a scan
tool and much, much more:
Base Kit F00E900091
$1100
KTS 200 ESItronic 1-Year
Subscription European - DVD
1987P12201
Your choice:
KTS 570 ESItronic A C12
1-Year Subscription Asian
F00E900095
On-Site Initial Training Included With Every
Purchase of BOSCH Diagnostic Tools!
User friendly interface. Enables diagnostic trouble codes, current data, flight
record, actuation test and graphical metering for all Asian vehicles through
2007. OBD I and OBD II level for Ford, GM and Chrysler. Includes
DLC cable, USB cable, software download CD,
instructional manual and molded case.
Functions includes, ABS, engine & transmission,
A/C system, and advanced functions.
Covers; Hyundai, KIA, Toyota, Lexus, Honda, Acura, Nissan,
Infiniti, Mazda, Mitsubishi, Suzuki, Subaru, Scion, Isuzu,
Ford, Chrylser, Jeep and more.
KTS 200 ESItronic 1-Year
Subscription Asian - DVD
1987P12207
$995
KTS 200 ESItronic
European Single Update
(no subscription)
1987P12211
Your choice:
$995
CARMAN SCAN Lite
TECH
Universal scan tool
kit 2
for all Asian vehicles up to OE level.
$1495
KTS 200 ESItronic
Asian Single Update
(no subscription)
1987P12212
Tire Pressure Monitor Master Kit
Kit includes: TPM tool, with the latest software subscription, activation magnet, quick start guide, reset manual, upgrade cable, training CD, 6nM Hi
rechargeable battery and charging station, back-up software CD, digital tire
pressure gauge, 4-way valve tool,
valve core torque driver, flip-chart,
service and consumer posters
and printed manuals.
3833TQR
$659
Carman Scan Lite with Asian Software
20100-100UK
$2100
Carman Scan Lite with European/Asian Software
Universal scan tool kit for all Asian vehicles
up to OE level and European up to Intermediate
level. Covers; Mercedes-Benz, BMW, VW, Audi, SAAB and
Volvo up to Intermediate Level.
20100-100UA
$2900
4
FREE!
Mail-in Coupon in box for a OTC TIPS003A TPMS
Reset Tool from OTC with 3833TQR purchase.
FREE DELIVERY!
Battery Testing Systems
Battery Service Equipment
SABRE HP Battery diagnostic and vehicle starting/charging
system tester. Digital circuitry precisely controls battery test
loads to accurately determine battery conditions. Tests FLA
and AGM batteries accurately down to 1 Volt state of
charge. Built-in Voltmeter. Auto-sensing 3’ leads.
3167
$479
SABRE HP Battery & Electrical System Diagnostic
Tester with Printer Battery diagnostic and vehicle
starting/charging system tester.
Digital circuitry precisely controls
battery test loads to accurately
determine battery conditions.
Tests FLA and AGM batteries
accurately down to1 Volt stateof-charge. Built-in Voltmeter.
Removable auto-sensing
3’ leads.
3168
ES2500 The original entry level
professional jump starter.
900 Peak Amp
12 Volt Jump Starter
ES2500
ES5000
$169
$212
PRO-LOGIX®
$859
Tests 12 Volt batteries (125 -1400 CCAs) and analyzes by
measuring multiple parameters within the battery to deliver
accurate results. A live Voltmeter allows easy starting/
charging system testing. Its bright, 4 digit LED display indicates
the battery’s good/bad status, voltage, & available CCAs.
$139
Automatic Micro Processor
polarity protected battery
chargers feature: Compatible
with a variety of battery types:
Conventional , Maintenance Free,
AGM, Gel Cell, Deep Cycle, & Marine.
One touch control: Connect to battery, choose
your battery size, the charger does the rest
Quad-Phase Charging: Designed to extended life
of the battery. Maintains battery at full charge:
Will not overcharge the battery. Battery stays
charged and ready for use.
PL2208 8 Amp, Amp Hours: 8-60, Max. Charge
Digital Battery Tester with Printer The kit includes BCS
system analyzer, infrared printer, a 12 ft. extension
cable for in-cab testing, (2) Voltmeter probes, battery
side and threaded post adapters, detachable leads,
9 Volt battery, soft-sided carrying case.
3185
Booster Pac® Portable, professional,
easy to use jump starters. Features: battery
status LED, automatic charging,heavy-duty
flexible cables, and “Hot Jaw” clamps.
ES5000 For the professional who
needs serious starting power.
1500 Peak Amp
12 Volt Jump Starter
Digital Battery Tester
3183
EXCEPT WHERE NOTED
$709
Rate: 8 Amps
PL2208
$97.00
PL2212 12 Amp, Amp Hours: 14-175, Max. Charge
Rate: 12 Amps
PL2212
$117
PL2216 16 Amp, Amp Hours: 25-200,
Max. Charge Rate: 16 Amps
Battery Service Kit
PL2216
Kit includes: terminal puller, 4-way post
cleaner and reamer, angled battery nut
pliers, GM 5/16”, extra long 5/16” and
10 mm battery terminal ratchet wrenches,
and terminal cleaning brush.
516508
$55.95
Non-Contact Thermometers
$137
OCTANE SERIES®
Wheel chargers feature:
an enhanced Transoid™
Transformer and NEW
QuadForce™ Rectifer design,
rugged, industrial-grade
clamps, EZView™ control
panel, Comfort Walk™
handle, NEW Versa-Trex™
wheels and 72” 6-gauge
cables.
MiniTemp™ is pocket-sized and easy to use. Powered by
OS6110 12 Volt - Manual,
a 9 Volt battery. Great for checking painted finishes.
Range: 0 to 750° F.
FLU
Charge Rates: 40A/15A/2A,
Engine Starting Amps: 200A,
Ammeter.
0S6110
$49.95
The MiniTemp™ MT6 Features: single dot laser
sighting system and large display. Temperature
range: -20° to 932° F. 10:1
distance to spot ratio.
FLU
$69.95
FST PRO Fuel System Tester
Diagnose and pinpoint common fuel system failures including failing
fuel pump, faulty pressure regulator, blocked filter(s), pinched fuel line,
contaminated fuel, and fuel tank vortex. Measures fuel pressure and flow to
accurately pinpoint fuel system failures. Patented system
simulates extreme driving conditions in the shop
to provide the most accurate
diagnosis. Capable
of testing both
return and returnless fuel systems
including
electronic control.
MV5545
$739
VideoStik - Video Inspection Scope
Features a high resolution remote color
camera, 2.5” full-color monitor, a
water-proof, flexible Staylok, 36”,
10 mm shaft, mirror and magnet,
high output LED illumination and
5 hrs. of operation on the 4-AA
batteries. Poly pro storage case.
1-year warranty.
VS36-10WW
$279
$242
OS6120 6/12 Volt - Timer - 2 Hr/Hold,
Charge Rates: 6V-40A, 12V-40A/15A/2A,
Engine Starting Amps: 6V-130A, 12V-200A,
Test Feature, Voltmeter/Ammeter.
0S6120
$349
Charge Rates: 6V-60A, 12V-60A/40A/2A,
0S6130
$379
Charge Rates: Infinite charging rate up to 60A,
12V Fully Automatic Charging Mode,
0S6140
$409
VO-Fiber Optic Inspection Scope Kits
Features: sharp 7400 pixel resolution, industrial
sealed switch, flexible stay-put waterproof shaft,
chemical- and fuel-resistant, focus from 3/8” to
infinity, includes; mirror, magnet and molded
storage case.
2x Brightness, 5.8mm Shaft
VO36-6H
6x Brightness, 10mm Shaft
$259
$259
VO36-10WW
5
To Order Call... 800-999-9982
Variable Pin Spanner Wrench
European Radio Removal Tool Kit
Includes the popular tools needed to remove the
radio from the dash on the following European
vehicles: BMW, VW, Audi, and Mercedes-Benz.
4712
Universal design fits many different types of pulleys
having slots or holes,including camshaft pulleys
and crankshaft pulleys. Wrench is
adjustable from 1-1/4” to 5”;
works with a 1/2” drive
ratchet or breaker bar.
6613
$60.95
$18.95
Additional Delivery
Charges May Apply.
Deluxe European Radio Removal Tool Set
8-piece set. Quickly and easily removes the radio from the
dash without damage to the radio or dash. Includes
Removal Keys for Audi, Becker, Mercedes-Benz,
VW, Porsche and Skoda, Pentagon
Wrench for BMW, Bent
U-hooks for Audi,
Blaupunkt, Ford, Grundig,
VW and Allen Hex Wrench
for BMW & Opel.
Chrysler/Jeep Cam Tool Kit
Ensure proper cam timing when
servicing timing belts, chains,
head gaskets, or performing
other valve train repairs.
Applications:
1993 – current 3.5 V-6 engine.
1994 – current 2.0 & 2.4 I-4
and 2.5 V-6 engines.
1998 – current 2.7 V-6 engine.
1981 – 1993 2.2 & 2.5 I-4 engines.
1989 – 1995 2.0 I-4 Mitsubishi engine. 1999 – current 4.7 V-8 engine.
1991 – 1997 3.0 V-6 Mitsubishi engine. 2002 – current 3.7 V-6 engine.
4715
$41.95
6689
European Door Handle Kit
This kit contains the tools needed to service
most door hinges and door handles on Audi,
Mercedes-Benz, Porsche, and Volkswagen
vehicles. Includes: A ratchet wrench with
(3) 12-pt. bits (4 mm, 8 mm, 10 mm)
and (2) T45 Torx® bits; a T30 Torx®
long handled driver; and a
T20 Torx® T-handle driver.
Designed for removing damper pulleys in tight engine
compartments, without removing the radiator.
Use on the following:
GM 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L, and 8.1L V8s. Also works on
Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988. Chevrolet trucks 2003–
later 4.2L I6, 2004–current 3.5L I5 and 2005–current 2.8L I4. Chrysler
engines from 1990–later, including 2.0L, 2.4L-4s; plus 2.5L, 2.7L, 3.3L, 3.5L,
and 3.8L V6s. Ford 1995–later V8 engines with 3 spoke pressed on damper.
Mitsubishi Eclipse 1995–1999 2.0L DOHC non-turbo.
6785
Kit contains the 3-jaw puller, four lengths of forcing
rods, and a forcing screw with a 3/8" square drive
for ratchet use, and a 3/4” hex for wrench or socket use.
$77.95
7707
Additional Delivery
Charges May Apply.
Tool allows for holding the crankshaft damper when tightening
or loosening the crankshaft bolt. Fits models:
4731
1997 Acura CL 2.2L 4 cyl.
1997 – Acura CL 2.2L 4 cyl.
1997–1998 Acura CL 3.0L V-6
1998 Honda Odyssey 2.3L 4 cyl.
1999–newer Honda Odyssey 3.5L V-6
1992–newer Honda Prelude 2.2L 4 cyl.
1992–1996 Honda Prelude 2.3L 4 cyl.
2000–newer Honda S2000 2.0L 4 cyl.
$41.95
1990–1997 Honda Accord 2.2L 4 cyl.
1996–1997 Honda Accord 2.7L V-6
1992–newer Honda Civic 1.6L 4 cyl.
1997–newer Honda CR-V 2.0L 4 cyl.
1993–1997 Honda Del Sol 1.6L 4 cyl.
2000–newer Honda Insight 1.0L 3 cyl.
1995–1997 Honda Odyssey 2.2L 4 cyl.
1998–newer Honda Accord 2.3L 4 cyl. & 3.0L V-6
Additional Delivery
Charges May Apply.
Toyota
BMW
Specially
designed
socket is needed
to tighten or loosen
head bolts on Toyota
Paseo vehicles with 3S-GE
and 3S-FE engines. 8 mm socket
features a 12-point, 1/2” drive
socket.
Socket is designed to fit
in the cylinder head on M42
and M50 engines to remove
and install cylinder head bolts.
Spring loaded detent ball holds bolt
in place. Works with 1/2” ratchet, breaker
bar, or torque wrench. Socket size is E12
for external TORX® bolts.
6022
$47.95
24-Piece RIBE Bit Set
5909
Pulls flange-type rear axles and most front-wheel drive hubs.
Internal and external jaws provide a variety of
combinations to pull bearings, gears and
seals. 2- and 3-way cross blocks and
Coupon for a 4703 FWD Axle
cone provide the perfect jaw
Puller Adapter with 4579
configuration for most jobs.
Purchase from OTC.
Set also includes a grip
wrench adapter and a dent
puller attachment.
FREE!
6410
6
$126
FREE
®
Additional Delivery
Charges May Apply.
Set includes
3/8” & 1/2”
Socket Adapters.
Ribe Key Set
Works on late model Volkswagen, Audi,
Lancer, Fiat, and Lancia vehicles. Ribe-style
bolts are used on cylinder heads, headlights,
and transmission fill plugs. Set includes
(7) keys: M4, M5, M6, M7, M8, M9,
and M10.
4609
$23.95
Master Torx® Socket Set
Includes a large 2-1/4” diameter dial indicator
with 1” range. Graduations of .001”. Includes:
magnetic base with post and indicator rod,
contact, rod connector and indicator holding
clamps. Molded case.
$24.95
$66.95
$97.95
Long Range Indicator Tool Set
5940
RIBE Key/Bit Sets
The bit pattern known as “RIBE” or
“polydrive” is now used on most
European cars and light trucks.
Metal storage box.
Additional Delivery
Charges May Apply.
9-Way Slide Hammer Puller Set
4579
$26.95
Head Bolt Sockets
Honda/Acura Crankshaft Damper Holding Tool
1998–1999 Acura CL 2.3L 4 cyl.
2000–newer Acura CL 3.2L V-6
1990–1992 Acura Integra 1.6L 4 cyl.
1992–1993 Acura Integra 1.7L 4 cyl.
1993–newer Acura Integra 1.8L 4 cyl.
1991–1995 Acura Legend 3.2L V-6
1996–newer Acura RL 3.5L V-6
1995–newer Acura TL 3.2L V-6
Additional Delivery
Charges May Apply.
1-3/4" long socket for cars in which the top shock-retaining nut is
recessed inside the strut tower. The tool’s center bore allows you
to hold the strut shaft from turning, using a 7/8” (22 mm)
hex key and appropriately sized wrench.
(2) fingertip ratchets (3-positions: forward,
lock, reverse). One bit driver; one socket
driver with quick release. 13-piece,
1/4” drive sockets. SAE: 1/4”- 7/16”.
Metric: 6 mm - 13 mm.14-piece, 4.5,
6.5 slotted bits, #1 and #2 Phillips bits.
Torx®: T10, T15, T20, T25, T27, T30;
Tamper resistant: T10, T15, T20, T25.
$54.00
$38.95
VW & Audi Strut Nut Socket
Fingertip Ratchet Bit and Socket Kit
5910
Additional Delivery
Charges May Apply.
$339
Harmonic Balancer Puller
6667
Additional Delivery
Charges May Apply.
52-piece professional socket set in
a blow- molded case. Includes:
TORX® bit sockets, TORX® PLUS
bit sockets,Tamper-Resistant
TORX® bit sockets, and External
TORX® sockets.
5900A
$115
LeakTamer™ Plus EVAP
Additional Delivery
Charges May Apply.
FREE DELIVERY!
Mercedes-Benz Service Tools
Molding Removal Kit
3-piece kit works on/in virtually all Mercedes-Benz
models.
6789
$46.95
Additional Delivery
Charges May Apply.
Fuel Tank Service Tool Kit
Tool kit designed to remove fuel tank lids and plastic
fuel tank cups to allow service on the fuel pump
and/or the fuel sending unit. Works on
Mercedes-Benz models W202 and W210.
6598
$169
Holds the water pump pulley to allow release of the fan.
Works on BMW M10, M20, M30, & other late model vehicles. (Holes at
38 mm & 44.5 mm.) and removes the thermo-viscous radiator fans found on
Mercedes-Benz and Ford vehicles. Works on M-B engines: M111, OM604,
OM605, and OM606 (C & E Class; 36 mm opening). Mercedes-Benz fan
clutch wrench works on M-B engines:
M103, M104, M119, and M120
(65 mm opening). BMW fan clutch wrench
works on BMWs and Fords (32 mm
opening). Clutch Holding Tool is used
to remove/replace thermo-viscous
fan coupling with the radiator in
place. Universal fan belt
adjustment wrench services
Mercedes-Benz, Nissan
Quest, and Mercury Villager.
6985
Fuel Injection Service Kit
Tests fuel injection systems
on most GMs, including
GM TBI, Ford, Chrysler,
and Jeep vehicles. Tests
imports, including CIS
and CISE fuel systems.
Includes 0 –100 PSI fuel
pressure gauge and 35 fuel
injection adapters, each equipped with
a quick-connect Schrader valve for
safety. Replacement seal kit also included.
6550
Fan Clutch Service Kit (BMW & Ford Also)
$188
$289
Magnetic Induction Heater with FREE Cart
Flameless 1500 Watt
heat reduces the need
for torches, solvents and
abrasives. Will only heat
metal objects, enabling
it to be used in or near
heat-sensitive areas
CE and CSA
approved. UL
compliant.
Ideal for damage free repairs to
metal or adhesive bonded parts
that can’t be accomplished
with flame or other radiant
heat sources.
6650
$2195
FREE!
Butane Torch
with 6650
Purchase...
546552 Roll-Around
Cart, 7612 Infared
Thermometer
and 543036
Hail Dent
Inductor
from OTC.
®
Dashboard Service Tool Kit
8-piece tool kit contains: (2) removal
tools for ignition lock on model W126.
(2) removal tools for ignition locks on models
W124 &W201. (2) removal hooks for
instrument cluster on models W107, W116,
W123, W124, W126,W140, and W201.
(2) radio removal tools on models
W129, W140, W202, and W210. Covers
virtually all Mercedes-Benz models since 1992.
6711
$40.95
Additional Delivery
Charges May Apply.
Piezo electronic
automatic ignition system.
Wind-proof flame with
weather-proof ignition. Flame
temperature up to 2400° F.
Adjustable flame for high or
low temperatures. Constant
burn time up to 60
minutes.
3H102A
$28.95
Handler® 125 Welder
Comes ready to weld with flux cored wire.
115 Volt input, 125 Amp output, welds up
to 24 gauge - 3/16” steel. Upgrade kit
available for solid wire use.
$439
®
Handler 125 Upgrade Kit for MIG Welding
Conversion kit for solid wire with gas.
195158
XTF Fixed Shade Black
Black Flame
Lens Speed:
1/3,600, Shade
Control: #10,
Fixed Sensitivity:
Fixed - Delay:
Fixed Battery:
Solar Charging
Lithium.
Lens Speed:
1/12,000, Shade
Control: #9 to #12,
Sensitivity: Infinite
Analog Dial, Delay:
Fast/Slow Switch,
Battery: AAA
battery, Solar.
770432
$102
FREE
Bonus Pack
$104
770450
CSA/CE
Approved
$185
Portable Acetylene OXY/FUEL Kits
with the purchase of a Handler® 140 Mig
Welder... Includes a FREE Cart and
XTF Auto-Darkening Helmet.
with FREE Bonus Pack
115 Volt input, 25-140 Amp
output, welds 24 gauge 1/4” steel. Ready to weld
with solid or flux cored wires.
500535
Additional Delivery
Charges May Apply.
Hoods/Helmets
MIG Welders
500487
EXCEPT WHERE NOTED
Portable Acetylene TAG-A-LONG™ Outfit
Portable, light-weight complete oxy/acetylene
outfit cuts to 1/2” and welds to 1/8”. Tough
polyethylene carrier with hose wrap and accessory
storage compartment. Includes safety check valves
and 3-year torch warranty.
770500
$399
“Victor Style”
$665
with FREE Cart
OXY/FUEL
Cutting Torch Outfit
7 Voltage Settings
for precise control.
230 Volt input,
25-185 Amp output,
welds 24 gauge 5/16” steel.
500527
All brass construction. Cuts to
1/2” and welds to 1/8”. Includes
safety check valves and 3-year
torch warranty.
$829
Both the 140 and 187 are capable
of running mild steel wire or stainless
steel wire .023 -.035” (0.6 - 0.9 mm), flux cored wire .030 -.045” (0.8- 0.9 mm), and aluminum wire
.035” (0.8 mm). Four output voltage settings with wire feed tracking. Includes 1 lb. (.45 kg) spool of
wire and adaptable for using 4” or 8” (102 or 203 mm) spools. Built-in wire feeder and gas solenoid
valve. Dual-gauge regulator and gas hose. 10 ft. H10 MIG torch. 10 ft. Worklead with clamp. Three
.030” (0.8 mm) contact tips. Sample spool of .030” (0.8 mm) self-shielded flux cored welding wire.
770502
$203
24” Precision Straight Edge
®
Use with feeler gauge to measure degree of straightness
in the head,
block or flywheel.
6429
$73.95
Additional Delivery
Charges May Apply.
7
To Order Call... 800-999-9982
COOL TECH Automatic R-134a Hybrid Service System
CarbonClean MCS 245
The Complete Fuel System Service and Diagnostic Center
The Cool-Tech34788-CQ, fully compliant with SAE J2788
standards! Recovers 20% more refrigerant, charge accuracy
1/2 ounce, which means it will cost less to recharge a
system. Advanced features include: control
panel that stores flat when not in use,
database expansion slot, service prompts
on a 2x larger display, the ability to change
between traditional & hybrid vehicle systems
without fear of cross contamination with
improved oil injection, built-in storage
for extra filter and on-board storage
for compressor oils.
Fully electronic-microprocessor controlled operation. Technician
can conduct 5 diagnostic tests on the vehicle’s fuel
system. Works on port fuel, TBI, CIS
and carbureted vehicles. Effective tool
to reduce vehicle emissions and help
pass smog tests. Safety features
include warning lights, alarms and
automatic shut-off. Portable 12 Volt DC operation.
MCS245
$3995
34788-CQ
Includes 1 Start-up Service Kit.
Additional Service Kits available below.
$3999
®
Gasoline Engine Detergent
$99.95
Intake Cleaning Detergent
(12) 8 oz. bottles
400-0030
$99.95
Cash Back
with 34788-CQ purchase. You
will receive from OTC a Dust Cover,
XL1A Leak Detector, 7610 Infrared
Thermometer and a 34724
Replacement Filter included
in box... $400 Total Value!
(12) 8 oz. bottles
400-0020
$200
FREE!
CarbonClean Service Kit
Purchase 2
Service Kits
and Freight
is Pre-Paid.
Purchase the
34788-CQ and
get $200 Cash Back
from OTC or a FREE
ROB 16009 DiscovR
R-134a Refrigerant
Identifier - for
redemption logon to
www.robinair.com
Recycle Guard
TransTech III MTT 1100
The Easiest ATF Exchanger Ever Made
“One Touch” electronic control for
ease of use. Replaces virtually 100%
of the dirty ATF. Cooler line pressure
gauge. Fill and drain buttons to
adjust fluid level after service. Quick
and convenient drain pan feature.
Complete adapter kit for most
domestic and foreign vehicles.
17622
Internal Replacement Filter
17623
$199
$47.95
The Cool-Tech 34288 combines simple operation with
superior accuracy. It recovers, recycles, evacuates,
leak tests, and recharges R-134a quickly and
accurately. Meets SAE J-2788 standards for
accuracy: 95% refrigerant recovery and
charging to +/- 1/2 oz. Other features and
functions: vacuum leak test, automatic air
purge, refrigerant charging, refrigerant
management, vacuum function, and a
New 4x20 multilingual display.
$3995
Includes 1 Start-up Service Kit.
Additional Service Kits available below.
TransTech Service Kit
$89.95
$28.95
COOL TECH Automatic R-134a Service System
MTT-1100
(6) 2-Step Kits
400-1037
17622 Install Kit
17641
Removes sealant, dye,
lubricant, and other
contaminants from
refrigerant prior to
entering the recovery
unit.
Purchase 2
Service Kits
and Freight
is Pre-Paid.
34288-CQ
$3195
FREE!
16256 Syringe Type Oil
Injector (R-134a) XL1A
Refrigerant Leak Detector
and a 17492 - Dust Cover
from SPX Robinair with
34288-CQ purchase.
COOLXCHANGE Multi-Coolant Service System
No electricity needed; shop air powers
the unit. No hoses to cut. No
ventilation required. “Hands off”
coolant transfer process is
performed, with the engine off,
in about 10 minutes. Unit features
pressure regulator and sight gauge
for 15 gallon waste tank. Includes
(2) supply tanks.
$100
Cash Back
Purchase the
34288-CQ and get
$100 Cash Back
from OTC - for
redemption logon to
www.robinair.com
LeakTamer™ EVAP Detection Systems
Uses OEM-approved STAR technology for EVAP
testing and features auto correct EVAP pressure.
Uses Patented OEM approved UltraTraceUV™
dye. Tests with nitrogen or shop air. Also
detects wind and water, vacuum/induction,
climate control vacuum, exhaust leaks and
many more.
75700
$1869
6521
$1139
FREE!
DiscovR R-134a Refrigerant Identifier
Protect you’re A/C service equipment.
Know whether or not you have
acceptable R-134a refrigerant
before servicing a vehicle. Uncover
hard to find air contamination, the
system notifies you when there is
excessive air. Pass or Fail lights
clearly indicate refrigerant purity.
12V DC powered.
16009
8
$659
$50
Cash Back
Purchase the
16009 and get a
Coupon for $50 Cash
Back from OTC.
16345 Cordless UV Light and
Glasses Kit from OTC with 6521 purchase.
Toyota A/C Disconnect Tool
Releases plastic quick-connect fittings on
air conditioning lines at the evaporator.
Easy to use: rotated plastic fitting, insert tongs
into two release holes and push.
6073
$14.95
Additional Delivery
Charges May Apply.
FREE DELIVERY!
PowerLuber™ Grease Gun Kits
Professional Grease Guns
Heavy-Duty Lever-Action Grease Gun
14.4 Volt PowerLuber™
Exclusive “flip-over-follower” & 3-way
loading. 16 oz. or 14.5 oz cartridge.
1142
New 14.4 Volt battery provides
outstanding performance with
longer battery life between charges.
New two-speed switch design
delivers high pressure or high
volume delivery. New stroke
indicator. “Smart Charger”
recognizes battery condition
with a one-hour charge. Kit includes
battery, charger and 30”
high-pressure hose.
$23.95
Additional Delivery
Charges May Apply.
1134
Heavy-Duty Pistol Grip Grease Gun
Includes 18” whip hose and 5”
rigid tube, filler nipple/bleeder valve,
3-way loading, up to 7,500 PSI.
1134
$39.95
Additional Delivery
Charges May Apply.
1442
Fully automatic. Low-pressure operation
(40-150 PSI). 18” PowerLuber whip hose.
Exclusive “flip-over-follower” for loading.
16 oz. bulk or 14.5 oz. cartridge.
1162
Cooling System Test & Refill Kit
Run complete cooling system diagnostics with the
engine running and at normal operating
temperature and pressure. Check
proper function of thermostat,
cooling sensor, and cooling fan.
Diagnose blown head gaskets,
cracked blocks, and/or
cylinder head damage.
The 12 Volt battery recharges in only one hour
and lasts long enough to dispense as much as
(3) tubes of grease. Powerful,
up to 6000 operating PSI.
Includes battery charger and
heavy-duty case. Features a
high pressure relief valve that
alerts user of blocked zerk
fittings.
1242
$179
12 Volt PowerLuber™
Kit with Extra Battery 1244 $199
Heavy-Duty Grease Pump
MV4525
$269
120 lb. Drum (not included)
UV Leak Detection Kit
Includes: cordless/rechargeable
true UV LED light. (6) 1/4 oz.
dye cartridges UV enhancing
glasses with dye cleaner.
Injection gun with R-134a hose
& R-12 adapter. Molded case.
Dye available for other vehicle
systems.
16380
Air operated 50:1 ratio.
Dispenses 45 ounces or
80 cubic inches of NLGI0-2
grease per minute at 150 PSI.
Includes roll-around base
and follower plate. Includes:
air coupler/nipple, 7'
grease hose, straight swivel,
universal swivel, and
control valve.
9917
$819
$189
18-Gallon
VacuMaster 3 CFM Vacuum Pump
115 Volt, 2-stage design. 1/2” ACME
and 1/4” MFL intake fitting.
“No-hassle” over-the-counter
replacement warranty.
$255
Oil Service Reset Tool
Oil reset tool with multiple
adapters to reset oil service
lights on Volkswagen, Audi,
Mercedes-Benz, BMW and
Volvo through 2005. Includes
light reset procedure chart
for all domestic and
imports not requiring tools
to reset. Molded case.
3596G
$329
European/GM Oil Socket Kit
Kit features oil filter wrenches for the GM, BMW, Audi, and VW. High quality,
3/8” drive, forged sockets designed to last a lifetime. 3-piece oil socket kit
contains: 27 mm socket for the Cadillac STS 3.2L V6 and the
Mercedes-Benz 1.8L I4. 32 mm socket for the
2.2L GM Ecotec and SAAB. 36 mm for
the BMW M52, M60, M62, M70, &
M73 engines; M-B OM604, 605,
& 606 engines; VW/Audi VR6 engine.
6784
FREE!
LIJ 58000 Heavy-Duty Lube
Accessories Kit from Lincoln with LIJ 9917 purchase.
Pressurized Oil Drain
15300
with 1442 purchase.
12 Volt PowerLuber™
1142
$76.95
FREE!
$219
1415A 12/24 Volt
Charger from Lincoln
14.4 Volt PowerLuber™
Kit with Extra Battery 1444 $269
Professional Air-Operated Grease Gun
1162
EXCEPT WHERE NOTED
$35.95
Additional Delivery
Charges May Apply.
8-GPM. Includes
hose extension.
1,500 max. PSI.
Preset air
regulator
(up to
150 psi).
14-inch bowl
adjusts
from 45” to 72”.
Reinforced
dispensing
hose
doubles
as a sight
gauge to
prevent
overfilling.
Includes
safety
valve.
Digital
908EF
$269
Ford/Mazda 2.3L Oil Socket
Oil socket designed at 76.5 mm
to fit new 2.3L 4-cylinder
engines. Works on
Mazda 3, Mazda 5,
Mazda 6, Ford
Fusion, and
Mercury Milan
2.3L 4-cylinder
engines.
3601
6903
$219
$15.95
Hyundai/KIA 3.3L Oil Socket
Additional Delivery
Charges May Apply.
Subaru Oil Filter Socket
Works on 2006 Hyundai Sonata
3.3L V6 engine and soon to be
released new models of
Hyundai and KIA.
Oil socket designed
at 88.22mm to
fit new 3.3L
6-cylinder
engines.
66.5 mm, 14 flutes. Socket fits
between the exhaust manifold and
the oil filter for easy removal and
installation of the filter.
Works on 2003–
newer Subaru vehicles
having the 2.5L
4-cylinder,
turbo engine.
6904
6905
$15.95
Oil Meter
Additional Delivery
Charges May Apply.
$15.95
Additional Delivery
Charges May Apply.
9
To Order Call... 800-999-9982
Ingersoll-Rand Air Tools
Chicago Pneumatic Air Tools
Heavy-Duty Air Hammer Kit
Air Nibbler
Includes CP715 Air Hammer plus
a 4-piece chisel set packed in a
heavy-duty carrying case.
2,100 blows per minute.
Cuts out quarter panels without
distorting the edges of the material.
Holds a tight 1/4” radius.
CP715K
$75.95
325
Additional Delivery
Charges May Apply.
Heavy-Duty Angle Die Grinder
Positive grip 1/4” collet chuck.
Self-locking throttle lever.
Standard Duty Die Grinder
Excellent for tire scuffing, cleaning
tire molding and general high
speed polishing and grinding.
Max RPM: 22,000.
CP872
$62.95
302A
Comes with two collet
wrenches. Self-locking throttle
lever. Positive grip 1/4” collet chuck.
308A
Complete with 1/4” and 6 mm collet.
Max RPM: 22,500.
$61.95
Self-locking throttle. Ball bearing
construction.
301
Features an easy access speed control and
insulated grip. Free Speed: 23,000 RPM
Combines a unique motor controller
that virtually eliminates over-speeding...
with a powerful 8 HP motor.
Features an easy access speed control and
insulated grip. Free Speed: 28,000 RPM
3445
$103
Reversible Angle Reverse Drill
Powerful 1/4-HP die grinder with rear exhaust.
Insulated handle grip. Easy access speed regulator.
Maximum RPM: 23,000
7807R
$109
NEW!
$219
Durable Jacobs® multi-craft chuck.
Reversible, with convenient control.
Comfortable lever throttle. Grease plug
for easy preventative maintenance.
Mini Angle Die Grinder
CP7562
Additional Delivery
Charges May Apply.
$59.95
4-1/2” Super-Duty Angle Die Grinder
$109
Mini Straight Die Grinder
CP7556
$78.95
Additional Delivery
Charges May Apply.
Mini 120° Angle Die Grinder
CP7563
$126
Heavy-Duty Die Grinder
Additional Delivery
Charges May Apply.
CP875
$159
$109
Reciprocating Saw
Comes with 6 high-speed
steel cutting blades and
two hex wrenches.
10,000 Strokes Per Minute
2” Mini Grinder & Cutter
Features a compact 2” wheel
size with a variable speed,
self-locking throttle. Compact, only
1.2 lbs. and a mere 5.5” in length.
Full 180° protective guard.
Includes: 60, 80, & 120 Grit
20,000 Max. RPM
Grinding Wheels and
2 Cutt-Off Wheels
CP7500D
429
$153
$97.00
Chicago Pneumatic Air Ratchets
1/4” Reversible Mini Air Drill
3/8” Super-Duty Ratchet
General purpose, reversible drill. Excellent for drilling, honing,
reaming and hole sawing. Fast Free Speed: 2,700 RPM.
Features Tri-Spring
anti-slip head design which
virtually eliminates slippage.
CP7300R
$149
CP7830Q
3/8” Mini Air Drill
Triple planetary gearing for smooth
operation. Teasing throttle. Handle
exhaust. Free Speed: 2,400 RPM.
CP785
This heavy-duty kit includes the
CP828 air ratchet plus a set of
(5) sockets packed in a heavy-duty
carrying case plus a flashlight.
Socket sizes: 3/8”, 7/16”, 1/2”,
9/16”, and 5/8”.
Ultimate Torque: 50 ft.-lbs.
$117
Heavy-Duty High Speed Cutter
$121
CP828K
Air Reciprocating Saw
3/8” Heavy-Duty Ratchet
Variable speed lever-style throttle. 360°
adjustable exhaust directs air away from
the operator and the work.
CP7901
$157
107XPA
Torque Wrenches
Chrome plated alloy
steel. Reversible
ratchet head.
25-250 ft.-lbs. 1/2” Ratchet Head
3T425
10
$59.95
3T415
$325
$99.95
1/4” Titanium Flathead™ Ratchet
$36.95
Flathead™ design gets in and out of
tight spaces easily. Accessible forward
& reverse switch allows for 1-hand operation.
3T660
Stubby design, only 6 1/2” long and
weighing only 1-1/8 lbs.
103A
$35.95
$103
1/4” Ratchet
®
3T317
$112
Ingersoll-Rand Air Ratchets
10,000 strokes per minute. Adjustable
guard/guide. Premium tool for body,
exhaust, and muffler work.
20-200 in.-lbs. 3/8” Ratchet Head
3/8” Heavy-Duty Ratchet Kit with
FREE Flashlight and 5-Piece Socket Set
Rugged, energy efficient 1/2 HP motor
Lightweight at only 1 5/8 lbs. Square handle
design for positive grip.
CP861
$185
Additional Delivery
Charges May Apply.
1215Ti
$179
FREE DELIVERY!
Ingersoll-Rand Air Impacts
Chicago Pneumatic Air Impacts
1/2” General-Duty
3/8” Super-Duty
Power and smoothness for suspension,
frame, tire and engine work.
Unaffected by air pressure changes. Extremely
compact and lightweight. Built-in power
regulator prevents over-torquing.
Handle exhaust.
Ultimate Torque: 425 ft.-lbs. CP734H
$117
1/2” Super-Duty Impact
Wrench Kit
212
Kit includes the CTO CP749
impact wrench, a 4 oz. bottle
of Protecto-lube and 5
impact sockets: 1/2”, 5/8”,
3/4”, 7/8”, 15/16” and
molded storage case.
$222
$209
CP749K
CP749 with 2”
Ultimate Torque: 625 ft.-lbs. Extended Anvil CP749-2
$173
3/8” Titanium
Lightweight, weighs just 2.48 lbs.,
convenient push-button forward/
reverse and power output dial, a grip
that fits comfortably in your hand and
has through-handle exhaust and
360° swivel inlet.
2115TiMAX
$265
1/2” Super-Duty
1/2” General-Duty
High performance dual chamber motor
featuring magnesium components. Lightweight,
only 2.7 lbs. Overall length 6.3 inches, compact
enough to get into tight spaces.
Handle exhaust. Balanced design with easy-touse controls, tease trigger, full-power in reverse,
adjustable power in forward. High output impact
mechanism.
CP7740P
$269
FREE!
236
13-Piece Impact
Socket Set 1/2” Drive,
$110
Additional Delivery
Charges May Apply.
1/2” Heavy-Duty
Impact Wrench
7/16” - 1-1/4” sockets from
CP with CP7740P Purchase.
Durable, twin hammer
impact mechanism. Pressure-feed
lubrication.Adjustable power regulator.
Easy to service two-piece construction.
Variable-speed.
3/4” Heavy-Duty
Impact Wrench
Ideal for spring work, truck
and bus maintenance, farm machinery
and construction equipment.
231HA
Ultimate Torque: 1,000 ft.-lbs.
2135TiMAX 1/2” Impact Wrench
CP772H
$379
Handle exhaust directs air away from work
area. 3-position power regulator in forward
and 1 in reverse to match
the power to the job.
Working torque
range @ 90 PSI:
100 -950 ft.-lbs.
8-Piece Impact
Free speed: 6300 RPM.
Socket Set
Max. Torque
(Reverse): 780 ft.-lbs.
FREE!
CP7763P
2135T iMAX
$289
1” - 1-1/2” sockets.
from CP with CP7763P
Purchase.
3/4” Heavy-Duty Impact Wrench
$425
Full power in reverse; adjustable power
in forward. Integral 360° swivel inlet.
Handle exhaust.
1” Heavy-Duty
258
Handle exhaust directs air away from work
area. 3-position power regulator in forward
and reverse to match the power to the job.
Extreme durability for everyday work.
3/4” Super-Duty Impact Wrench
$719
261
Features: all steel construction. Spring-powered
automatic recoil. Adjustable outlet arm. 8-position
ratchet gearing locks the reel at the desired hose
length. Heavy-duty rubber hoses. Ball stop included.
Air 50’ x 3/8”
$129
Air 50’ x 1/2”
83754
$179
94552
$509*
30 Gallon Horiz. Tank,
Gas Powered, 23.2 CFM @ 175 PSI
Splash lubricated two-stage
compressor pump. Integral
cylinder/head gasket-less
design. Vibration isolator.
Electric start. Five year
compressor pump
warranty.
$2489
$399*
Grease 50’ x 1/4”
13 HP KOHLER,
HGR7-3K
Oil 50’ x 1/2”
94354
$499
Gas Powered Air Compressor
All-Steel Heavy-Duty Air Reels
83753
$325
Jumbo hammer mechanism. Pressure-feed
lube system.
CP7774
$149.95
Weighs just 3.95 lbs.and features a
featherable trigger, a wider range
of power regulator settings in forward,
and a patented one-hand
forward/reverse.
Free Speed 9,800 RPM.
3/4” Super-Duty
EXCEPT WHERE NOTED
*
11
To Order Call... 800-999-9982
Advantage Series Air Compressors
Composite Bearing Driver Kit
Provides a convenient way to contact directly
with the upper inner edge of the bearing so
that force is quickly and evenly applied.
Kit contains (9) sizes: 39.5 mm, 44.5 mm,
50.0 mm, 59.0mm, 63.0mm, 65.0mm,
72.0 mm, 76 mm, 81mm and an
aluminum handle.
4408
Magnetic starter, vibration isolator, auto tank drain, low
oil monitor, air cooled aftercooler, (except 5 HP)
Horizontal and vertical tank models available.
5 HP, 80 Gallon Vertical Tank, 230 Volts,
(208 Volt also available, specify when ordering).
Single-Phase, 16.5 CFM @ 175 PSI
HR5-8-1-ADV - Horiz. Tank
VR5-8-1-ADV - Vert. Tank
$2499
$56.95
7-1/2 HP, 80 Gallon Vertical Tank , 230 Volts,
Additional Delivery
Charges May Apply.
StrutTamer™ HD
(208 Volt also available, specify when ordering).
Single-Phase, 23.5 CFM @ 175 PSI
VR7F-8-1-ADV
For MacPherson strut springs. Features
adjustable arms and 4-point locking jaws
that securelyholds the spring in place for
optimum safety. Adjustable center screw
keeps the strutand spring aligned. Easy
mounting to wall, work bench,
or optional stand.
6585
$2879
15 HP and 25 HP
models also available.
$589
StrutTamer™HD
with Stand
6586
10 HP, 120 Gallon Horiz. Tank,
230 Volts, Three-Phase,
34.8 CFM @ 175 PSI.
HR10-12-ADV
$719
$4250
Strut Springs Coverage:
2-1/2” to 10”.
Spring Diameters.
2-1/2” to 24”
Vertical Stroke
Range.
NEW!
CURTIS Compressor
7-1/2 HP, Air Cooled Aftercooler,
Magnetic Starter, Low Oil Monitor, Automatic
Tank Drain, Tank Isolator Pads , 80 Gallon,
Single Phase, 23.2 CFM @175 PSI.
FREE!
Coupon included with OTC 6586
Purchase for a Free OTC 5537
Hub Tamer from OTC.
Headlamp
Alignment System
BCA4 ISO Color
Defines the
“High Intensity
Zone” for
precise alignment every time.
Features a
rotational mast
and aligns in
five easy steps;
position, square
up, switch
to desired
beam
pattern,
centeron
lamp, adjust,
and move next
to lamp.
Not for
safety
inspection
center
applications.
BCA4
$549
7ET2VT8UP - Vert. Tank
$2595
Under Hood Light
®
25 Watt fluorescent lamp. 25’ SJTOW cord. The padded LitePerch™ self
adjusts to fit the hood & opens from 4’ to 6’, 6”.
13003
$165
2- or 3-Point Engine Support Bar
QRS High Performance Rotary Screw Air Compressors
More efficient than reciprocating compressors. Cleaner, cooler and
drier air supply. 100% continuous duty. (Reciprocating compressors are not).
Quiet operation. (Quieter than a dishwasher). Compact size. Easy Installation.
Less maintenance - 4,000 hour maintenance cycle. Pulse free air. Great for
body shop applications.
HPD model pictured with
optional dryer.
HP High Performance
Package is complete
with tank, quiet enclosure
and safety switches.
UL listed and ASME
approved. (Not Pictured).
Provides three-point support
for greater stability. Includes
cables and adjustable hooks.
Front stabilizer removes
easily for tight applications.
1725
$195
1,500 lb. Easy Roller™
Fits tread widths up to 12”. Heavy-duty
casters. 4 units required to raise a
6000 lb. vehicle.Features built-in
lifting hydraulics.
1580
$145
HPD High Performance
Package with Dryer
also includes a tank
mounted refrigerated
air dryer for
clean, dry air.
Includes spray gun, 2 quick
connect tips, chemical tube
and 25’ high pressure hose.
7.5 HP, with Air Dryer
2500 PSI, 2.4 GPM,
60 Gallon, 21.2 CFM
@ 150 PSI, Single Phase
QRS7.5HPD-1
$579
MAXUS Pressure Washer
Honda GVC160 Engine
MX5222
$6795 - Horiz. TankLea
3 HP, 5 HP, 7.5 HP, 10 HP, 15 HP,
20 HP, 25 HP and 30 HP models also available.
12
Voltage: 230-1-60 available in 3, 5 & 7.5 HP
only. All 3-phase QRS have tri-voltage motors capable of 200V, 230V or 460V.
3-phase starter is suitable for all 3 voltages. QRS 3/5/7.5 HP have start/
stop control. QRS 10/15 HP have load/no load control with timer shutdown.
FREE DELIVERY!
Drum/Rotor Combination Brake Lathes
EXCEPT WHERE NOTED
Digital/Dial Calipers
®
4000SP Features: spindle travel 6.875”, spindle
speed 100 RPM, max. rotor diameter 14.5”, max.
rotor thickness 1.875”, brake
drum diameter min. 6”,
max. 28”, max. drum
depth 6.875”, max.
load standard 1” arbor,
100 lbs.
Digital - Digital display, inch/metric
conversion.4 measurements: inside,
outside, depth and step.
3C301
depth and step. Dial has fine line
indicating hand. Adjustable dial
with thumb wheel fine adjustment.
6427
$4455
4000B Features twin
cutters, boring bar, quick
drum to rotor changeover,
and two spindle
speeds.
4000B*
3B530
$6495
$662
Adapter Kit “B”
Passenger car and light truck,
thru 1/2- ton, 1” diameter.
2B
$209
®
Easy-to-read digital display with inch/metric
conversion. Selectable depth stops for easier use.
Pointed anvils and 4.25” long arms to inspect
drums before turning or replacing.
Plastic storage case.
Range: 6”- 20.00”/150mm - 500mm.
Graduations: .0005”/.01mm.
Digital Rotor Gauge
*Adapter Kit Required.
1A
Range: 0-6”/0 -150 mm.
Graduations of .001”.
$65.95
Digital Drum Gauge
*Adapter Kit Required.
Adapter Kit “A”
Passenger car, 1” diameter.
Additional Delivery
Charges May Apply.
Dial - 4 measurements: inside, outside,
4000SP*
Brake Lathe Adapter Kits
Range: 0-6”/0 -150 mm.
$22.95
*Must Purchase
a Brake Lathe
Adapter Kit
with Brake Lathe
Purchase.
$819
Adapter Kit “E”
All of the adapters necessary to mount most hub and hubless drums and rotors
through 1-ton vehicles on a 1” arbor. Includes standard double
taper adapter set, truck double taper adapter set,
spacer, self-aligning spacer and
double chuck set.
®
Digital display, inch/metric
conversion. Pointed anvil
and 3.5” long arms.
3M430
Range: 0-5.5”/0-140 mm.
$80.95
Disc Rotor/Ball Joint Gauge
Checks ball joint wear, disc
rotor run-out, gear backlash,
valve guide wear, and camshaft wear.
Special locking pliers. Mounts directly
on spindle. Molded case.
6450
®
$212
6E
Range: 0 - 1”
Graduations: .001”.
$1269
Disc Brake Caliper Tool Kit
Brake Lathe, Sign, Tool Board
and Adapters sold separately.
This tool is a "must" item when installing
new brake pads on vehicles with 4-wheel
disc brakes. Rotate the tool on the parking
brake actuator to retract the piston. Works
on most GM vehicles with 1-1/2” brake
pistons, most Ford vehicles, Pontiac Fiero,
and import vehicles. Includes plate, 3/8”
extension, forcing screw, and adapters.
Brake Lathe Bench
Heavy-gauge steel.
Includes: chip funnel,
bucket and adapter, top
tool board and hooks.
7317A
$81.95
2500
$639
Brake lathe, adapters and
accessories sold separately.
Brake/Wheel Specialty Tools
Bushing Driver Set
17-piece set installs bushings from
10mm to 42mm in diameter. Includes
large, medium, and small driver
handles with nuts; (14) bushing adapters
ranging from 10mm to 42mm.
Molded storage case.
4407
$111.95
Disc Brake Piston Tool
This “cube” tool rotates pistons back into brake calipers
when replacing brake pads on vehicles with rear wheel disc
brakes. Tool has 3/8” square drive and provides 6 drive pin
configurations to fit most cars and light trucks.
4589
$6.95
Additional Delivery
Charges May Apply.
Microline ML8 Tech +Wheel Alignment System
2.4 GHz Radio, 8 Sensor Advanced Alignment System
20 Degree “CCD” camera measurement system provides full 360° 4-wheel
alignment with live continuous background
calibration check. Features include
specification driven OEM procedures
with over 12,000 built-in vehicle
specs from 48 manufacturers, Thrust line,
axle set back, off set, front and rear toe,
camber, caster, SAI diagnostics, included
angle, 4-wheel steering, diagnostic
help drawings, “before and after”
adjustment color print-outs. Zero
induced run-out wheel clamps
that attach to the tire instead
of vehicle rim, ranging from
13” to 23” with optional
26” adapters. Includes
17” flat screen monitor,
color printer, mouse and
rugged roll around
cabinet and wheel unit
calibration device &
software.
Honda Lower Ball Joint Tool Set
F00E900122
Use with ball joint service set #6530, 7248, and
7249 to remove and install ball joints on:
$18,995
7996
$10 4
1986–97 Accord
1988–00 Civic
1988–91 CRX
1993–99 del Sol
1983–98 Prelude.
13
To Order Call... 800-999-9982
APX90 Automated Tire Changer
875 Wheel Balancer
Multiple automated helper devices
make mounting and demounting
an easy job. Integrated Wheel Lift,
RoboArm® applies
direct pressure
from cylinder
to create bead
lock, the RoboRoller
keeps the bead in the
drop center, Horizontal Power
Rollers provide easy bead
& rim lubrication and the
Duckhead® Roller
provides leverage.
The 875 features: standard OEM
applications. 40mm shaft. Auto A&D
data entry. Direct tape-a-weight
placement. Hidden weight capability
(behind the spoke).LED matrix display.
Self-calibration.
Balance wheels up to 130 lbs.
110 Volt, single phase.
875
$3545
Rim Diameter
Capacity: 9” - 30”
External Clamping, 11” - 32”
Internal Clamping.
Maximum Tire Width: 16“
Maximum Tire Diameter: 44”
Electric: APX90E
Air: APX90A
$11,532
Laser Guided 1250 Wheel Balancer
1250 - Displays exact Tape-A-Weight and behind-the-spoke
placement. Handles larger wheel assemblies,
up to 44” diameter. 8 balancing modes.
Multiple operator feature allows up to
four technicians to work at once.
220 Volt, single phase, or 220 Volt, three phase.
OTC Service Jacks
Ergonomic handle offers user comfort and
easy mobility. CE marked, ASME/PALD tested.
Minimum clearance: 3” on 2-ton and 5-1/2”
on 3-ton. Max. height: 18-1/4” on 2-ton and
20-3/4” on 3-ton. Features a foot pedal for quick
lifting and a built-in tray for fasteners and tools.
Specify when ordering.
1250
$5049
2-Ton 5202
$299
Tire Diameter: Up to 44”
Rim Width: 2” to 19.9”
Rim Diameter: 8” to 29.9”
Maximum Tire Weight: 150 lbs.
Useable Shaft - Diameter: 40mm
3-Ton 5203
$449
Basic Passenger Adapter Set
114339
$295
Hein-Werner Service Jacks
Extended Passenger Adapter Set
114341
$819
Premium Passenger
Light Truck Adapter Set
114342
$1839
MT845AD Microline Tire Balancer
Double LED display of weight value, with
gram/ounce changeover. LED weight position
indicating arrows. Electronic sensing arms
for wheel rim distance, width and diameter.
Simple, accurate attachment of all concealed
adhesive weights with electronic easyfix® data
arm. Standard pneumatic centering flange with
3 cones, pedal operated. Integral air supply
maintenance unit with pressure reducer, moisture
trap and oil atomizer. Automatic stop-start with
menu guided function keys. 9 balancing programs
for passenger car wheels, including
3 for concealed attachment of the
outer adhesive weight on the
inside of the rim. 2 balancing
programs for motorcycle wheels.
Pedal operated brake to lock
machine shaft. Wheel guard
hood in new softline design,
including electrical interlock
for automatic start. Retaining
pins for clamping devices
attached to side of machine.
MT845AD
$534 4
14
Must Purchase
an Adapter Set
Sold Separately
Features: a one piece handle, flanged
side plates to increase strength, an
in-line pump provides efficient
pumping operation, full swivel rear
casters for easy positioning, sealed
hydraulic pump for durability, a pressure
relief valve to prevent overloading, cast iron lift
arm for heavy-duty loads, and a U-joint mechanism
for precise load control.
2-Ton HW93642
$379
3-Ton HW93652
MS46SFA Microline Tire Changer
Swing arm changer will clamp
26” wheels from the outside
optional pneumatic
assist arm available.
Bead breaker range
up to 16”. Bead breaker
power 5500 lbs.
Max. rim width 15”.
Rim clamping
external 10” to 26”.
Rim clamping
internal 12” to 28”.
Max. tire diameter 44”.
Built-in air oiler & air
regulator. Two clamping
cylinders. Swing arm style.
110 Volt 150 air PSI required.
pneumatic helper arm
with follower arm.
F00E900125
$6295
$519
FREE DELIVERY!
Rim Clamp® Tire Changers
10,000 lb. 2-Post Lift
5040A/E
Maximum tire
width: 10.5“
Maximum tire
diameter: 50”
Clamping range:
10” - 21” external,
12” - 24” internal.
$3099
®
True Asymmetric design rotates the columns 30°.
This allows vehicle doors to open fully. The
one piece columns has a “Double S”
design for maximum strength. The
single point lock release allows
Dual Control
both locks on each column to
Model Available
(CQOA10i).
release at the same time. Lift are
third party certified. Dual Control
(controls on both side) is available.
Nationwide
is designed to work on a wide
variety of applications, including virtually all
OE fitments. Available in air (required air
source 110 to 175 PSI, 14 to 15 SCFM at
150 PSI) or electric, (110 Volt, 30 Amp
single phase.)
Electric: 5040E
Air: 5040A
EXCEPT WHERE NOTED
CQOA10
Service and Installation
Available.
$3695
FREE!
CTS 85000440
Automated
Tire Lift with
7050 EX or AX
Purchase from
COATS.
FREE!
Maximum Rim Width: 14“
Maximum Tire Diameter: 50”
Clamping Range: 6” - 22” external,
8” - 26” internal.
Retail Value $347
10,000 lb. 2-Post Lift with 3-Stage RA Arms
Low Profile “Run Flat”
®
Holds bead in drop center
position. Holds tire in up
position to reduce effort in
second bead removal.
Includes left robotic arm.
Robo-Arm™ makes changing
the toughest tires quick and
easy. Bead loosening system,
handles wheels. 2” to 17”.
Electric: 7050EX
Air: 7050AX
$7105
4-Post Lift Accessories
®
Bolt-On Alignment Kit
Upgrade your 4-post lift with highly accurate alignment capabilities. Kit
includes (2) RJ7000 rolling jacks, airline kit, (2) stainless steel radius gauges
and rear slip plate bolt on kit.
Features: true
asymmetrical design;
with a full stroke high
pressure cylinder in
each column.
3-Stage/Front and
2-Stage/Rear arms:
The three-stage arm
increases overall arm
sweep and minimum
arm reach to
precisely lift vehicles
that have: uni-body
construction,
visually marked
pick-up points on
the vehicle, wider
vehicle tread width
and lower profile,
and a short or long
wheelbases.
Minimum Arm height
is 3-5/8”.
Arm Configurations
for Frame Engaging Lifts
SPOA10RA
$3895
$7195
with CQOA10 purchase...
Set of Genuine Rotary FJ6115
Truck/Van Height Extension Adapters
7050AX/EX
S100078
Shown With
Optional
Accessories.
Rolling Jack - Fits Rotary Four-Post Lifts
Lifts wheels off runways for easy service.
RJ7000
$2495
14,000 lb. 4-Post Lifts
The 4-post one-piece non-welded runway offers:
14,000 lbs. of strength and durability with a built-in
rolling bridge track, the lifting cylinder located under
the runway to eliminate any opportunity for vehicle
door damage, a non-skid runway surface coating to
allow grip of tires and technician’s footing, locking
latches every 3” with Patented Sentinel Lock™ system,
and an air filter/regulator/lubricator to extend the life
of the lift and air-power tools. Extended wheelbase
available up to 206”. 158” short wheelbase also
available. Third party certified. Choose from closed
or open front models.
®
Closed Front
SM14L
Rise - 73-3/4”
Max. Wheel Base - 182-12” - 192-1/2”
Overall Length - 20’ 9”
Overall Width - 11’ 1”
Inside of Columns - 117-1/2”
Between Columns - 195-7/8”
Time of Full Rise - 65 Seconds
Width of Runways - 20”
Height of Runways - 7”
Width Between Runways - 43”
Lifting Capacity - 14,000 lb.
Voltage - Single Phase,
208 - 230 Volt
$5115
Open Front
SMO14L
Rolling Jacks
and Bolt-On
Alignment Kit
Available!
Not Included.
Sold Separately .
$6295
Shown With Optional Accessories.
15
To Order Call... 800-999-9982
FORWARD 4-Post & 2-Post Lifts
General service 4-post, 14,000 lb lift, 180” wheel base. Max. width 20” wide. Includes adjustable
runways with Jack In-rail Kit (anti-sway kit) “built in”. Standard drive-on ramps. ETL certified.
CQ14-4P
$4169
10,000 lb. Lift
Includes truck adapters. Spot-Rite™ Arm is
designed for symmetric and asymmetric lifting.
Features: Direct-Pull lifting, ALI/ETL 3rd party
approved, low profile arms and a dual safety
release system.
Shown with optional
Rolling Bridge Jack Sold
Separately below.
CQ10-2P
$2750
Pneumatic Rolling Bridge Jack
Rise - 77”
Overall Height 11’, 11-3/8”
Height to Shut-Off - 11’, 4”
Min. Ceiling Height - 12’
Min. Lifting Height - 3-5/8”
For use with all light-duty 4-Post Forward
models with jack rails. 6000 lb. capacity.
CQAJ6
$1829
Forced Air Portable Shop Heaters
Overall Floor Width - 133”
Inside Column Width - 111-3/4”
Drive Through - 99-1/8””
Truck Adapters - 1-1/2” - 3” & 6”
Voltage - Single Phase,
208 - 230 Volt, 20 Amp
Blazer Waste Oil-Fired Heaters
125,000 BTU Propane Portable Forced Air Heater
200,000 BTU Value Package
Adjustable heat output. Continuous spark
ignition. High output fan. Includes hose
and regulator. Uses 40 (On Low)100 lb. propane tank.
Blazer Waste Oil Heater, Tank & Chimney System
Heats up to 7,000 square feet subject to building design and heat loss.
Package includes MX200 heater, 215 gallon waste oil storage tank and
roof/chimney kit. Waste oil is a free fuel source and burning it satisfies your
“cradle to grave” responsibility.10 year limited warranty, UL listed.
BLP125V
$239
Why Heat with Waste Oil?
FREE Heat!
170,000 BTU Propane Portable Forced Air Heater
with Built-In Thermostat
Fed up with high heating
costs? As energy prices climb,
waste oil heat is gaining
popularity. Not only does
waste oil heat reduce your
heating bills, it also eliminates
the cost to haul used oil
off-site. Waste oil heaters
usually pay for themselves
in 12-18 months.
Heats up to 4,000 sq.-ft. Electronic
ignition.High output fan.
Includes hose and
regulator.
BLP170VT
$399
115,000 BTU Pro Plus
Kerosene/Diesel Portable
Forced Air Heater with
Built-In Thermostat
Heats 2,550 square feet.
360 CFM hot air flow.
9-gallon fuel tank..85-gallon
consumption per hour, 10.5
hours operating time/tank.
HSI electronic ignition.
Automatic fuel shut-off.
B115DT
$379
165,000 BTU
Kerosene/Diesel Portable
Forced Air Heater
with Built-In
Thermostat
Heats up to 3,900 sq.-ft.
Runs approximately
11 hours off a13.5
gallon tank.
B165DT
$412
16
Not Available in CA.
150,000 BTU
MX150-C
$4598
200,000 BTU
MX200-C
$4698
250,000 BTU
MX250-C
$5498
300,000 BTU
MX300-C
$5698

- WORLDPAC

Transcription

Similar documents

Johnny Tremain by Esther Forbes Objectives

official press kit 2015

45 Plateau Incentive Program

View Full Screen

PlanWheel XLU3 Spec Sheet MASTER

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

8`Wide Woodside Vinyl Storage Sheds

party for a living

10.5` Woodside Vinyl Storage Sheds

Saebo Evaluation and Treatment Kit