2012_profit_catalog_final_changes 2_21_12.indd
Transcription
2012_profit_catalog_final_changes 2_21_12.indd
ProFit Dealer KICKER’s premier mobile-audio equipment products are distributed worldwide. They are sold by approximately 1,500 Authorized Dealers in the United States, and export sales are managed through a distributor network serving another 2,000 dealers in more than 50 countries. These dealers are committed to providing customers with outstanding KICKER product selection, customer support and service. By visiting an Authorized KICKER Dealer, you get: // Broad product selection – Authorized Dealers carry a wide selection of KICKER mobile, powersports, marine and personal audio products. // Professional sales staff – Your questions are answered quickly by people trained to understand the products they sell and install. // Trained service support – Authorized Dealers are eager to help so any product- or installationrelated issue is quickly resolved. To find the closest Authorized Dealer or get answers to your questions, visit www.kicker.com, write to [email protected], or call 1-800-256-KICK. KICKER quality is backed by an extensive warranty. KICKER mobile electronics feature a two-year limited warranty, and KICKER mobile acoustics feature a one-year limited warranty. KICKER also offers one year of EXTRA warranty on all amplifiers if consumers add a KICKER Installation Kit at the time of purchase from an Authorized Dealer. Visit www.kicker.com/content/warranty to learn more. Come Kick It at KICKER World Headquarters and Visitors Center! For purchasing genuine KICKER gear or for just experiencing high-end audio and tricked-out demo vehicles in an architecturally engaging setting, look no further than the KICKER Visitors Center. Located inside the front doors at World Headquarters in Stillwater, Oklahoma, the Visitors Center is open to educate the public about the KICKER brand, mobile- and home-audio products, and how quality audio gear can create great sound and enhance your life adventures. KICKER World Headquarters proper consists of 62,539 square feet of offices, 179,884 square feet of warehouses and 92,800 square feet of off-campus warehousing for a grand total of over 335,000 square feet. KICKER World Headquarters accommodates group tours, and the Visitors Center is open to the public Monday through Friday, 9 a.m. to 4 p.m., at 3100 North Husband. The Visitors Center is closed on holidays. +Music… it’s deep in our roots. We live it, breathe it and make it kick! Nearly 40 years ago, KICKER’s Livin’ Loud legacy began as a two-man operation, hand-building professionalspeaker systems in a narrow one-car garage. With very few resources and an intense love for music, company founder and current president Steve Irby invented the mobile-stereo enclosure market in his northern Oklahoma community when he developed the Original KICKER®. It was the first full frequency-range speaker box designed for cars and trucks. From that historic moment, delivering concert-like audio quality across a wide volume range with renowned bass and accurate sound has always been the KICKER way. Building upon the success of that concept, KICKER has continued to do huge things in the car-audio industry, focusing on raising the world’s expectations for superior audio performance with rumbling subwoofers, crystalclear speakers and powerful amplifiers. Gracing the picturesque Stillwater, Okla., skyline, KICKER has stayed true to the values on which it was built. Many of our employees come from musical backgrounds, making it their passion to continually push the limits of audio-design technology and performance. It is our wish that every person who enjoys music as we do, listen to a KICKER product, and hear music the way your favorite artists intended it to be heard. Background image: Founder and President Steve Irby developed a knack for performance at an early age. He’s pictured here as a youth driving his “racing machine.” Later on he focused on music and entertainment. The making of history In 1980 Irby invented the highperformance car audio enclosure market when he developed the Original KICKER®, the first full-range speaker enclosure that fit behind the seat in a standard-cab pickup truck. 73 86 80 87 KICKER Speakers were created in 1986, specifically made for automobiles and allowing the consumer to install speaker units. The first subwoofer line was called the Competition™ Series. Under Steve Irby, Stillwater Designs began as a two-person operation in a single-car garage in 1973, hand-building professional sound and musical instrument speaker systems for churches, auditoriums and entertainers. 88 Stitched surround and the one-piece UniPlate™ extended pole piece were introduced in 1988 as KICKER engineers continued to raise the bar on subwoofer reliability and innovation. The SoloX 18-inch subwoofer hit stores in 2003, the biggest speaker ever in the KICKER lineup at nearly 100 pounds, 6,000 peak watts power handling, and with the SPAIR™ field-replaceable cone/coil assembly. In 1992 Stillwater Designs engineers created the world’s first “small-box” subwoofer – the KICKER Solo-Baric®. Billed as “all the bass, half the space,” it utilized the smallest enclosure in car-audio history. 92 Stillwater Designs engineers created the KICKER Freeair™ in 1987, the world’s first subwoofer designed specifically for infinitebaffle installations. 00 The world’s first square subwoofer patented, the Solo-Baric L7, is created in 2000. 03 KICKER has been honored with prestigious Innovations Design and Engineering Showcase Awards from the Consumer Electronics Association (CEA) numerous times, including most recently for the Hideaway™ Powered Subwoofer System. 03 KICKER Marine had its first product introductions in 2003 with the KM10 Subwoofer and KM Coaxial Systems. 11 SUBWOOFERS: 5 :SOLO X 6 :L7 7 :CVX:L7 BOXES 8 :L3 : CVR 9 :L3 BOXES : CVR BOXES 10 :CVT : COMP 11 :COMP VT BOXES : COMP BOXES POWERED SUBWOOFERS: 13 :HIDEAWAY 14 :SUBSTATION 15 :BASSSTATION AMPLIFIERS: 17 :IX 18 :ZX 19 :DX 20 :AMP ACCESSORIES : EQs 21 :EQs SPEAKERS: 23 :QS : RS 24 :KS 25 :DS ELEMENTS: 27 :PXi50.2 28 :PX AMPS:PXCVT 29 :PS COAX:KM SUBS 30 :KM SPEAKERS 31 :KM TOWERS : AMPS ACCESSORIES: 33 :AMP KITS AND WIRES 36 :BRASS : FUSES : GRILLES 37 :SPECIFICATIONS Blue, red and yellow – use the colors to help you choose the equipment that’s right for you! KICKER uses colors to distinguish between our product “families,” so you can easily decide your system needs. Products within the same color categories have many similar characteristics and blend together seamlessly for musical perfection. “Blue” delivers simply the best – breakthrough products featuring cutting-edge technologies and exceptional elements coming together for the most complete, extraordinary musical experience. “Red” is high-performance-driven. Our promise to you is superior engineering and dependable gear constructed from advanced materials for proven, tried-and-true mobile entertainment. “Yellow” boasts legendary KICKER performance – reliable product that’s a definite step up from stock gear for improved sound quality. You’ll find trusted KICKER knowledge and upgraded components for guaranteed audio enhancement. 3 Bass – it’s deep down in our soul. For nearly 40 years, we’ve worked to develop it, evolve it, perfect it. From the genesis with the Competition series, to the ground-breaking Freeair, to the small-box round Solo-Baric, and then the world’s first square Solo-Baric, patented, you can be sure KICKER has stamped its brand on the best bass machines available. The rumble, the thump… unending until you’re done. 4 SUBS SOLO X® // Monster 18-inch handles 3,000 watts RMS, 6,000 watts in a peak power surge // Patented square-woofer technology; cast-aluminum basket; injection-molded SoloKon™ cone // Oversized dual voice coils made from copper-clad aluminum wire that withstands extreme heat // UniPlate V.2™ hyper-extended pole/backplate provides enhanced heat transfer for max power handling, superior cone-motion control and intensified low bass // ARCTIC (Aluminum Rapid Cooling Thermal Induction Centering) Cap™ forces cooling air through the vented pole to further dissipate heat S18X: SIZE: 18, 45 POWER: 6000/3000 IMPEDANCE: 2 or 4 DVC S12X: SIZE: 12, 30 POWER: 3000/1500 IMPEDANCE: 2 or 4 DVC S10X: SIZE: 10, 25 POWER: 3000/1500 IMPEDANCE: 2 or 4 DVC speaker size: in, cm . power handling: watts PEAK/RMS . impedance: Ohms Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. Solo X is responsible for countless SPL (soundpressure level) and SQ (sound-quality) world championships in autosound competition. Why square? 20% MORE OUTPUT S18X SEALED VENTED [enclosure volume] Min. 0L 10L .35ft3 20L .7ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 0L 10L .35ft3 20L .7ft3 70L 2.5ft3 80L 2.8ft3 30L 1ft3 50L 1.8ft3 60L 2.1ft3 20L .7ft3 Max. 200L 300L 7.06ft3 10.6ft3 90L 3.2ft3 100L 3.5ft3 Max. Min. 10L .35ft3 Min. 100L 3.5ft3 Max. 40L 1.4ft3 Min. 0L 90L 3.2ft3 3 Max. Min. S10X SEALED VENTED [enclosure volume] 40L 1.4ft3 Min. S12X SEALED VENTED [enclosure volume] 30L 1ft3 Max. 340L. 12ft 30L 1ft3 Max. 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 5 SUBS SOLO-BARIC – A HISTORY OF THE WORLD’S GREATEST SUBWOOFER SOLO-BARIC® L7 // The KICKER’s first square subwoofer builds on a decade of dominance // They say, “Imitation is the sincerest form of flattery.” The world’s first patented and biggest-selling square woofer has had lots of imitators. It’s the “innovative square subwoofer technology that increases output enough to give users the equivalent performance of the next size larger round speaker.” But did you know Solo-Baric started as simply the world’s first “small-box” subwoofer, and round? The very first Solo-Baric was introduced in 1992, a round subwoofer that applied isobaric design principles to a single woofer in an extraordinarily compact sealed enclosure. At the time, that enclosure was the smallest in mobile-audio history. The eight-inch Solo-Baric subwoofer featured that signature, tight thump from a tiny enclosure of only 0.33 cubic feet. And we still receive emails and phone calls from consumers who continue to use or have questions about our round Solo-Baric subwoofers. In 2003, KICKER’s square sub was patented. Others tried to copy the superior workmanship with their own square imposters, but the honors bestowed upon the KICKER square left no doubt which subwoofer was legit. By 2003, the world’s first square sub also became the only patented square. Year after year, consecutive media, consumer choice and industry awards have confirmed that Solo-Baric square is the standard by which others are judged. // KICKER’s best subwoofer is a multiple industry award winner // Our patented, exclusive square-woofer design means more cone area, bigger air displacement and more volume than a round woofer. A 12-inch L7 delivers as much bass impact as a 15-inch round woofer. // Superior sound quality and high power handling // Excellent thermal capabilities for superb reliability // One-piece, ultra-rigid SoloKon cone with 360-degree back bracing is strong and accurate // Ribbed Santoprene® surround is double-stitched for toughness // Dual voice coils with high-temp copper windings handle heat // Semi-progressive-roll spider provides substantial excursion and loudest bass // Venting in the back bracing and along the spider landing provides max air flow and cools coils // Cast-aluminum basket has motor-cooling perimeter venting for superlative acoustics // Solid, extended pole piece increases heat dissipation and extends woofer life // T-cut top plate boosts magnetic-field strength for high efficiency // Heavy-duty, ribbon tinsel leads intertwined with L7 spider provide highest excursion S15L7: SIZE: 15, 38 S12L7: SIZE: 12, 30 S10L7: SIZE: 10, 25 S8L7: SIZE: 8, 20 POWER: 2000/1000 POWER: 1500/750 POWER: 1200/600 POWER: 900/450 IMPEDANCE: 2 or 4 DVC IMPEDANCE: 2 or 4 DVC IMPEDANCE: 2 or 4 DVC IMPEDANCE: 2 or 4 DVC speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. It’s the ribbing in the corners that make the L7 work. We’ll put this woofer up against any others. S15L7 SEALED VENTED [enclosure volume] Min. 0L 10L .35ft3 20L .7ft3 30L 1ft3 S12L7 SEALED VENTED [enclosure volume] 6 50L 1.8ft3 60L 2.1ft3 3 Max. 170L. 6ft 0L 10L .35ft3 20L .7ft3 30L 1ft3 Min. 80L 2.8ft3 90L 3.2ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 Max. 40L 1.4ft3 Max. 50L 1.8ft3 60L 2.1ft3 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 Max. Min. 0L 10L .35ft3 20L .7ft3 Min. 10L .35ft3 30L 1ft3 Max. Max. Min. 0L 100L 3.5ft3 70L 2.5ft3 Min. S8L7 SEALED VENTED [enclosure volume] 40L 1.4ft3 Min. S10L7 SEALED VENTED [enclosure volume] 3 Max. 170L. 6ft Min. Max. 20L .7ft3 30L 1ft3 SUBS Want a round woofer? This is KICKER’s best. COMPVX™ // KICKER’s best-sounding round subwoofer // Superior sound quality and high power handling // Excellent thermal capabilities for superb reliability // One-piece, ultra-rigid SoloKon cone with 360-degree back bracing is strong and accurate // Ribbed Santoprene® surround is double-stitched for toughness // Dual voice coils with high-temp copper windings easily handle intense heat // Semi-progressive-roll spider provides substantial excursion and loudest bass // Venting in the back bracing and along the spider landing provides max air flow and cools coils // Cast-aluminum basket has motor-cooling perimeter venting for superlative acoustics // Solid, extended pole piece increases heat dissipation and extends woofer life // T-cut top plate boosts magnetic-field strength for high efficiency // Heavy-duty, ribbon tinsel leads intertwined with CompVX spider provide highest excursion CVX15: SIZE: 15, 38 CVX12: SIZE: 12, 30 CVX10: SIZE: 10, 25 POWER: 2000/1000 POWER: 1500/750 POWER: 1200/600 IMPEDANCE: 2 or 4 DVC IMPEDANCE: 2 or 4 DVC IMPEDANCE: 2 or 4 DVC speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. CVX15 SEALED VENTED [enclosure volume] Min. Min. 0L 10L .35ft3 20L .7ft3 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 Max. 130L. 4.6ft3 Min. 0L 10L .35ft3 20L .7ft3 30L 1ft3 40L 1.4ft3 Max. 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 Min. CVX10 SEALED VENTED [enclosure volume] 30L 1ft3 Max. 142L. 5ft3 Min. CVX12 SEALED VENTED [enclosure volume] Max. 147L. 5.2ft3 LOADED ENCLOSURES 10L .35ft3 20L .7ft3 100L 3.5ft3 Max. Min. 0L 90L 3.2ft3 30L 1ft3 Max. 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 SOLO-BARIC® L7 SUB BOXES // Simple way to upgrade to award-winning bass in a system // Legendary Solo-Baric L7 subwoofers in dual- or single-woofer boxes // Sturdy MDF boxes covered in plush charcoal gray carpeting // Vented for ultimate output // Designed with rounded corners and internal bracing for strength, additional support and cosmetic appeal // Flared, oversized port delivers tight, accurate bass in the DS and VS // Thin-profile box (TS) designed for tight spaces utilizes a slot vent TS10L7: SIZE: 10, 25 DIM A: 6-11/16, 16.9 VS12L7: SIZE: 12, 30 DIM A: 14-11/16, 37.2 DS12L7: SIZE: 12, 30 DIM A: 16-3/8, 41.5 POWER: 1200/600 DIM B: 10, 25.4 POWER: 1500/750 DIM B: 18, 45.7 POWER: 3000/1500 DIM B: 19-9/16, 49.7 TYPE: THIN DIM C: 15, 38.1 TYPE: SINGLE DIM C: 16, 40.6 TYPE: DUAL DIM C: 16, 40.6 DIM D: 21-1/2, 54.6 IMPEDANCE: 2 DIM D: 18-3/4, 47.5 IMPEDANCE: 2 DIM D: 32-3/8, 82.2 IMPEDANCE: 2 speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. TS10L7 DS12L7 7 SUBS SOLO-BARIC L3™ // Our newest square masterpiece is relentless, delivering more impact with the patented extra cone area // As a Solo-Baric subwoofer, it uses KICKER’s most innovative concepts and technology // One-piece SoloKon with full back bracing for toughness and zero distortion // Tough-as-nails steel basket with perimeter venting; solid pole piece dissipates heat for longer woofer life // Provides the extra bass and SPL supplied by Solo-Baric’s innovative square cone // High-temp voice-coil wire; ribbed Santoprene® surround; Spiralead™ tinsel-lead technology S15L3: SIZE: 15, 38 POWER: 1000/500 IMPEDANCE: 2 or 4 DVC S12L3: SIZE: 12, 30 POWER: 800/400 IMPEDANCE: 2 or 4 DVC S10L3: SIZE: 10, 25 POWER: 800/400 IMPEDANCE: 2 or 4 DVC speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. S15L3 SEALED VENTED [enclosure volume] Solo-Baric is the world’s first square technology, patented. 0L 20L .7ft3 10L .35ft3 30L 1ft3 0L 20L .7ft3 10L .35ft3 30L 1ft3 0L 20L .7ft3 10L .35ft3 30L 1ft3 SUBS 0L 8 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 Max. 130L. 4.6ft3 10L .35ft3 20L .7ft3 30L 1ft3 40L 1.4ft3 Max. 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 Min. 0L 10L .35ft3 20L .7ft3 30L 1ft3 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 Max. Min. 10L .35ft3 100L 3.5ft3 Max. Min. 0L 90L 3.2ft3 Max. Min. CVR8 SEALED VENTED [enclosure volume] 30L 1ft3 Min. CVR10 SEALED VENTED [enclosure volume] Max. 142L. 5ft3 Min. CVR12 SEALED VENTED [enclosure volume] Max. 147L. 5.2ft3 Min. 20L .7ft3 20L .7ft3 90L 3.2ft3 100L 3.5ft3 40L 1.4ft3 Max. 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 Max. IMPEDANCE: 2 or 4 DVC IMPEDANCE: 2 or 4 DVC IMPEDANCE: 2 or 4 DVC IMPEDANCE: 2 or 4 DVC Min. 10L .35ft3 80L 2.8ft3 Max. 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 KICKER sells more CompVRs than any other woofer. CVR15 SEALED 0L 70L 2.5ft3 Max. 130L. 4.6ft3 Min. speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. VENTED [enclosure volume] 60L 2.1ft3 Min. // KICKER’s most popular round subwoofer is the foundation for legendary bass // Injection-molded cone with 360-degree back bracing eliminates distortion // Steel basket with dual voice coil-cooling perimeter venting // High-temp voice-coil wire; ribbed Santoprene® surround; Spiralead™ tinsel-lead technology POWER: 1000/500 POWER: 800/400 POWER: 800/400 POWER: 400/200 50L 1.8ft3 Min. COMPVR® CVR15: SIZE: 15, 38 CVR12: SIZE: 12, 30 CVR10: SIZE: 10, 25 CVR8: SIZE: 8, 20 40L 1.4ft3 Min. S10L3 SEALED VENTED [enclosure volume] Max. 142L. 5ft3 Min. S12L3 SEALED VENTED [enclosure volume] Max. 147L. 5.2ft3 Min. Max. 30L 1ft3 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 LOADED ENCLOSURES SOLO-BARIC L3 SUB BOXES // Ready-to-install, award-winning bass in a system // Square Solo-Baric L3 subwoofers in dual- or single-woofer boxes // Sturdy MDF boxes covered in plush charcoal gray carpeting // Vented for ultimate output // Designed with rounded corners and internal bracing for strength, additional support and cosmetic appeal // Flared, oversized port delivers tight, accurate bass in the DS and VS // Thin-profile box (TS) designed for tight spaces utilizes a slot vent TS10L3:SIZE: 10, 25 POWER: 800/400 TYPE: THIN DIM A: 6-11/16, 16.9 DIM B: 10, 25.4 DIM C: 15, 38.1 DIM D: 21-1/2, 54.6 IMPEDANCE: 2 VS12L3:SIZE: 12, 30 POWER: 800/400 TYPE: SINGLE DIM A: 14-11/16, 37.2 DIM B: 18, 45.7 DIM C: 16, 40.6 DIM D: 18-3/4, 47.5 IMPEDANCE: 2 DS12L3: SIZE: 12, 30 POWER: 1600/800 TYPE: DUAL DIM A: 16-3/8, 41.5 DIM B: 19-9/16, 49.7 DIM C: 16, 40.6 DIM D: 32-3/8, 82.2 IMPEDANCE: 2 speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. VS12L3 TS10L3 Vented thin-profile boxes fit perfectly behind a pickup truck seat What’s more important – the woofer you choose, or the box you put it in? No matter how outstanding our woofers are, they will not perform properly if you put them in the wrong enclosure. The box’s dimensions, internal air space, construction, bracing, finishing and tuning will all affect the performance. For legendary, guaranteed KICKER bass, choose a genuine KICKER factory-designed-and-built enclosure. The right woofer in the right enclosure, every time! LOADED ENCLOSURES COMPVR SUB BOXES // Perfect combination of reliable, dual-voice-coil CompVR woofers and legendary KICKER enclosures // Dense gray carpeting over sturdy MDF boxes with monogrammed carbon-fiber look // Vented for ultimate output // Dual enclosures designed with internal bracing for additional support and strength // Flared, oversized port delivers tight, accurate bass VCVR12: SIZE: 12, 30 POWER: 800/400 TYPE: SINGLE DIM A: 11-3/8, 28.8 DIM B: 14-5/8, 37 DIM C: 16-1/16, 40.7 DIM D: 17-13/16, 45.1 IMPEDANCE: 2 or 4 DCVR10: SIZE: 10, 25 POWER: 1600/800 TYPE: DUAL DIM A: 13-1/2, 34.3 DIM B: 16-1/2, 41.8 DIM C: 14-1/8, 35.9 DIM D: 28-3/4, 73 IMPEDANCE: 2 DCVR12: SIZE: 12, 30 POWER: 1600/800 TYPE: DUAL DIM A: 14-1/8, 35.8 DIM B: 17-3/8, 44 DIM C: 16-1/16, 40.7 DIM D: 32-11/16, 82.9 IMPEDANCE: 2 speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. VCVR12 DCVR10 9 SUBS COMPVT ™ // High-performance bass in tight places from a true shallow-mount subwoofer // Shallow-depth four-layer voice coil and ventless pole piece provide extreme power handling // Injection-molded polypropylene cone eliminates distortion // Steel clearance plate allows CompVT to fit in the tightest places, including thin sealed enclosures // New CompVT 6-1/2-inch 1 Ohm designed for harsh demands of Powersports vehicles and to work specifically with PX Powersports Mono Amplifiers CVT12: CVT10: CVT8: CVT65: CVT65: SIZE: 12, 30 POWER: 800/400 SIZE: 10, 25 POWER: 800/400 SIZE: 8, 20 POWER: 400/200 SIZE: 6-1/2, 16.5 POWER: 300/150 SIZE: 6-1/2, 16.5 POWER: 300/150 IMPEDANCE: 2 or 4 SVC IMPEDANCE: 2 or 4 SVC IMPEDANCE: 2 or 4 SVC IMPEDANCE: 2 or 4 SVC IMPEDANCE: 1 SVC speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. CVT12 SEALED VENTED [enclosure volume] Min. 0L 10L .35ft3 CVT6.5 SEALED 30L 1ft3 40L 1.4ft3 Max. 60L 2.1ft3 50L 1.8ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 0L 10L .35ft3 20L .7ft3 30L 1ft3 Max. 40L 1.4ft3 50L 1.8ft3 Min. 10L .35ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 Max. Min. 0L 100L 3.5ft3 Max. Min. CVT8 SEALED VENTED [enclosure volume] 20L .7ft3 Min. CVT10 SEALED VENTED [enclosure volume] Max. 130L. 4.6ft3 Min. 20L .7ft3 Max. 30L 1ft3 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 Min. A special four-layer, single voice coil is the reason for the shallow-mount CompVT’s big power handling Max. [enclosure volume] 0L 10L .35ft3 20L .7ft3 30L 1ft3 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 SUBS NOW in a 2-Ohm impedance This is the one that started it all – in 1986 it was our landmark Competition Series. Over the years KICKER engineers have continued to refine the design to deliver more performance. 90L 3.2ft3 100L 3.5ft3 COMP ™ //The world’s best subwoofer value – legendary KICKER bass //Injection-molded cone with 360-degree back bracing eliminates distortion //Ribbed double-stitched surround; high-temp voice-coil wire; Spiralead™ tinsel-lead technology // New Comp 2-Ohm option designed to match perfectly with a single KICKER mono amplifier // New Comps also available in 15- and 12-inch models with dual voice coils C15: SIZE: 15, 38 POWER: 500/250 IMPEDANCE: 2, 4 or 8 Ω SVC C15D4: SIZE: 15, 38 POWER 600/300 IMPEDANCE: 4 DualVC C12: SIZE: 12, 30 POWER: 300/150 IMPEDANCE: 2, 4 or 8 Ω SVC C12D4: SIZE: 12, 30 POWER 400/200 IMPEDANCE: 4 DualVC C10: SIZE: 10, 25 POWER: 300/150 IMPEDANCE: 2, 4 or 8 Ω SVC C8: SIZE: 8, 20 POWER: 200/100 IMPEDANCE: 2, 4 or 8 Ω SVC speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. C15 SEALED VENTED [enclosure volume] 0L 10L .35ft3 20L .7ft3 30L 1ft3 10 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 0L 10L .35ft3 20L .7ft3 30L 1ft3 40L 1.4ft3 Max. 50L 1.8ft3 60L 2.1ft3 Min. 10L .35ft3 20L .7ft3 30L 1ft3 Min. 10L .35ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 Max. 40L 1.4ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 50L 1.8ft3 60L 2.1ft3 70L 2.5ft3 80L 2.8ft3 90L 3.2ft3 100L 3.5ft3 Max. Min. 0L 70L 2.5ft3 Max. Min. 0L 100L 3.5ft3 Max. Min. C8 SEALED VENTED [enclosure volume] 40L 1.4ft3 Min. C10 SEALED VENTED [enclosure volume] Max. 113L. 4ft3 Min. C12 SEALED VENTED [enclosure volume] Max. 141L. 5ft3 Min. Max. 20L .7ft3 30L 1ft3 40L 1.4ft3 LOADED ENCLOSURES COMPVT SUB BOXES // Smallest sub-loaded enclosures from KICKER, but make no mistake – blistering bass aboard // Loaded with innovative, shallow-mount CompVT woofers in three sizes // Designed to fit under pickup-truck seats, but fits in many space-challenged areas // The TCVT8 Sub Box is five inches deep and 16 inches long – perfect for under a seat // Dense gray carpeting over sturdy MDF boxes with monogrammed carbon-fiber look TCVT8: SIZE: 8, 20 POWER: 400/200 TYPE: THIN DIM A: 4-1/8, 10.5 DIM B: 5-1/16, 12.8 DIM C: 9-1/16, 23 DIM D: 16-5/16, 41.4 IMPEDANCE: 2 or 4 TCVT10: SIZE: 10, 25 POWER: 800/400 TYPE: THIN DIM A: 3-7/8, 9.7 DIM B: 6-1/2, 16.4 DIM C: 11-3/8, 28.8 DIM D: 19-11/16, 50 IMPEDANCE: 2 or 4 TCVT12: SIZE: 12, 30 POWER: 800/400 TYPE: THIN DIM A: 3-7/8, 9.7 DIM B: 6-15/16, 17.6 DIM C: 13-7/16, 34.1 DIM D: 21-13/16, 55.3 IMPEDANCE: 2 or 4 speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. TCVT10 TCVT8 The 8-inch TCVT Sub Box is only five inches deep and 16 inches long. LOADED ENCLOSURES COMP SUB BOXES // Loud, proud and affordable – proven Comp woofers in various sizes and applications // Dense gray carpeting over sturdy MDF boxes with monogrammed carbon-fiber look // Vented for ultimate output // Dual enclosures designed with internal bracing for additional support and strength // Flared, oversized port delivers tight, accurate bass in the DC and VC // Thin-profile box (TC) designed for tight spaces utilizes a slot vent TC10: SIZE: 10, 25 POWER: 300/150 VC12: SIZE: 12, 30 POWER: 300/150 DC10: SIZE: 10, 25 POWER: 600/300 DC12: SIZE: 12, 30 POWER: 600/300 TYPE: THIN DIM A: 4-3/4, 12 TYPE: SINGLE DIM A: 11-1/4, 28.5 TYPE: DUAL DIM A: 13-1/2, 34.2 TYPE: DUAL DIM A: 13-7/8, 35.2 DIM B: 7-11/16, 19.5 DIM C: 13-3/4, 38.4 DIM B: 14-5/8, 37.1 DIM C: 16-1/8, 40.9 DIM B: 16-3/8, 41.5 DIM C: 14, 35.5 DIM B: 17-1/4, 43.8 DIM C: 16, 40.5 DIM D: 21-3/4, 55.1 IMPEDANCE: 2 or 4 DIM D: 17-11/16, 44.8 IMPEDANCE: 2 or 4 DIM D: 28-1/2, 72.3 IMPEDANCE: 2 DIM D: 32-7/16, 82.3 IMPEDANCE: 2 speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. TC10 DC10 11 Get the thump you want with ready-made solutions for adding high-quality KICKER sound in versatile applications. You want a good sound system in your ride, and you seek a quick resolution that doesn’t take up valuable space or transform your interior. With a convenient KICKER woofer, enclosure and amplifier operating together as one, the end result is intense – trust us. 12 POWERED ENCLOSURE HIDEAWAY // 2011 CES Innovations Design and Engineering award winner // 150-watt, ultra-compact powered sub adds pounding bass in the tightest locations // Just over three inches high // Integrates with nearly any factory or aftermarket audio system // Remote bass control lets you easily fine-tune bass levels from song to song // KickEQ™ variable bass boost // 0°/180° phase switch reduces phase cancelling in the vehicle’s acoustic environment // Automatic turn-on options for powering up in any vehicle // Nylon straps with Velcro® and quick-connect plug make it easy to secure HS8: SIZE: 8, 20 POWER: 150 Box Depth (in, cm): 13-7/8, 35.2 Box Height (in, cm): 3-1/8, 7.94 Box Width (in, cm): 9-3/8, 23.8 Weight (lbs, kg): 9.4, 4.3 speaker size: in, cm . power handling: watts PEAK/RMS . impedance: OhmsPower handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. Perfect for under the seat. 13-7/8 ” 9-3 /8” 3-1/8” 13 A 450-or 400-watt, Class-D amplifier powers a Solo Classic or CompVR in a tough enclosure. POWERED ENCLOSURE POWERED ENCLOSURE 14 SUBSTATION™ SOLO CLASSIC POWERED SUBWOOFER // Premium self-contained, active woofer system for hard-hitting bass and ultimate convenience // PES10C uses a 10-inch Solo Classic subwoofer and a 450-watt, high-efficiency Class-D amp // After initial installation, simply strap down, plug in and enjoy // Velcro® straps and quick-connect wire harness easily secures or lets you quickly remove when needing hauling space //Remote bass control lets you easily fine-tune bass levels from song to song PES10C: SIZE: 10, 25 POWER: 450 DIM A: 5, 12.7 DIM B: 8-1/4, 21 DIM C: 13-1/4, 33.7 DIM D: 18, 45.7 WEIGHT: 35, 16 speaker size: in, cm . power handling: watts RMS . all dims: in, cm . weight: lbs, kg Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. SUBSTATION™ COMPVR POWERED SUBWOOFER //Premium self-contained, active woofer system for hard-hitting bass and ultimate convenience //PECVR12 features a 12-inch CompVR subwoofer and 400-watt Class-D digital amplifier //After initial installation, simply strap down, plug in and enjoy //Velcro® straps and quick-connect wire harness easily secures or lets you quickly remove when needing cargo space //Remote bass control lets you easily fine-tune bass levels from song to song PECVR12: SIZE: 12, 30 POWER: 400 DIM A: 11-1/4, 28.6 DIM B: 14-1/2, 36.8 DIM C: 16, 40.6 DIM D: 17-1/16, 43.3 WEIGHT: 38, 17 speaker size: in, cm . power handling: watts RMS . all dims: in, cm . weight: lbs, kg Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. POWERED ENCLOSURE BASSSTATION™ POWERED SUBWOOFERS //It’s the solution to legendary but versatile KICKER bass //Self-contained powered bass with Velcro® straps and quick-connect plug – easy to fit or remove when you need the space //Comes in a dual woofer box, a single hatch-style box, a single 10-inch thin-profile box, or 8-inch thin-profile //Integrates with almost any factory or aftermarket audio system PHD12: SIZE: 12, 30 PH12: SIZE: 12, 30 PT10: SIZE: 10, 25 PT8: SIZE: 8, 20 POWER: 200 POWER: 100 POWER: 100 POWER: 100 TYPE: DUAL DIM A: 7-11/16, 19.5 TYPE: SINGLE DIM A: 7-11/16, 19.5 TYPE: THIN DIM A: 4-11/16, 11.8 TYPE: THIN DIM A: 4, 10.2 DIM B: 11-1/4, 28.5 DIM B: 11-1/4, 28.5 DIM B: 7-11/16, 19.5 DIM B: 6-5/8, 16.8 DIM C: 14-15/16, 38 DIM D: 31-1/2, 80 DIM C: 14-15/16, 38 DIM D: 16-,13/16, 42.7 DIM C: 12-13/16, 32.5 DIM D: 19-5/16, 49 DIM C: 11-1/4, 28.5 DIM D: 16-15/16, 43 WEIGHT: 42.2, 19.5 WEIGHT: 25, 11.3 WEIGHT: 18, 8.2 WEIGHT: 13.8, 6.2 speaker size: in, cm . power handling: watts RMS . all dims: in, cm . weight: lbs, kg Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. PHD12 PT8 e PT8 Enhance your factory system in minutes. 15 All KICKER automotive amplifiers feature FIT™, Fail-Safe Integration Technology. Why is this important to you? Cars today are noisier than ever. Alternators, computers and A/V entertainment result in additional noise pulsing through your vehicle. FIT utilizes isolated differential inputs, rejecting noise and electrical interference for the quietest operation possible and ultimate audio clarity. KICKER KICKER amplifiers amplifiers use use distinctive distinctive features features to to go go beyond beyond the the lifeblood lifeblood of of aa sound sound system. system. FIT™ KICKERamps ampstotoreject rejectnoise noiseand and FIT™ allows allow KICKER interference interference for for silent silent operation operation and and clear clear audio. audio. Boost Boost converter converter technology technology in in the the ultimate ultimate IX-Series IX-Series monoblock monoblock amps amps provides provides over over 90-percent 90-percent efficiency efficiency with with fewer fewer parts, parts, smaller smaller sizes sizes and and amazing amazing performance. performance. KICKER KICKER Install Install Kits Kits help help your your KICKER KICKER amp amp work work easier easier and and better, better, and and you’re you’re also also rewarded rewarded with with an an extra extra year year of of warranty warranty for for using using one. one. Flexibility Flexibility and and reliability reliability ultimately ultimately make make KICKER KICKER power power the the only only choice choice for for any any high-performance high-performance mobile mobile audio audio system. system. 16 IX monoblock amps use a boost converter power supply for the highest sound quality and super efficiency. Boost converter technology allows IX monoblock amps to achieve a typical efficiency of more than 90 percent, way more than standard amp power supplies. That, along with the its need for fewer internal parts, allows for a smaller size of bass amp, the coolest operation, optimum reliability and overall excellent performance. IX1000.5 AMPS Ultra-small footprint Ultra-high efficiency IX MULTI-CHANNEL // Flawless IX-Series design with highest noise rejection and superb power // KICKER’s top amplifier with space-saving compact footprint and high-efficiency Class-D power // FIT™ provides the quietest operation possible by muting noise and interference // FIT™ lets IX easily integrate with most any factory or aftermarket head unit // Features a choice of auto turn-on modes // Install flexibility with all connections on one side and user controls on the opposite // Multiple-amp stacking mounts available for an integrated look (sold separately) // KICKER’s promise - actual power of your amp will always exceed rated power /// 5-channel IX1000.5 with 500-watt sub channel drives an entire full-range audio system IX1000.5: POWER 2Ω STEREO: 125x4 POWER 4Ω BRIDGED MONO: 250x2 POWER 2Ω MONO: 500x1 DIM A: 11-3/8, 28.8 REMOTE BASS INCLUDED IX500.4: POWER 2Ω STEREO: 125x4 POWER 4Ω BRIDGED MONO: 250x2 DIM A: 11-3/8, 28.8 all power listed in watts per channel . dimensions in in, cm AMPS IX500.2 IX STEREO // Single stereo model featuring 250-plus watts per channel of full-range Class-D power // Superior IX configuration including a compact framework and outstanding noise rejection // KICKER’s top amplifier with space-saving compact footprint and high-efficiency Class-D power // FIT™ provides the quietest operation possible by muting noise and interference // FIT™ lets IX easily integrate with most any factory or aftermarket head unit // Features a choice of auto turn-on modes // Install flexibility with all connections on one side and user controls on the opposite // Multiple-amp stacking mounts available for an integrated look (sold separately) // KICKER’s promise - actual power of your amp will always exceed rated power IX500.2: POWER 2Ω STEREO: 250x2 POWER 4Ω BRIDGED MONO: 500x1 DIM A: 9-3/8, 23.8 all power listed in watts per channel . dimensions in in, cm AMPS IX MONO // High-efficiency, energy-saving boost-converter power in 1000-watt or 500-watt models // Superior IX configuration including a compact framework and outstanding noise rejection // KICKER’s top amplifier with space-saving compact footprint // FIT™ provides the quietest operation possible by muting noise and interference // FIT™ lets IX easily integrate with most any factory or aftermarket head unit // Features a choice of auto turn-on modes // Includes soft-start circuitry and remote bass control // Install flexibility with all connections on one side and user controls on the opposite // Multiple-amp stacking mounts available for an integrated look (sold separately) // KICKER’s promise - actual power of your amp will always exceed rated power IX1000.1: POWER 2Ω MONO: 1000x1 DIM A: 9-3/8, 23.8 REMOTE BASS INCLUDED IX500.1: POWER 2Ω MONO: 500x1 DIM A: 9-3/8, 23.8 REMOTE BASS INCLUDED IX1000.1 IX 2-3/16” 5.5cm all power listed in watts per channel . dimensions in in, cm ” 7-7/8 20cm A // IX // CEA-2006 SPECS Description/Model 500.1 1000.1 500.4 500.2 1000.5 Rated Pwr., 4Ohm/Ch, 14.4Vdc, 1% THD (Watts) 275 550 75x4 150x2 70x4/275x1 Signal to Noise Ratio (ref: 1W, A-weighted) -75 -75 -85 -85 -80/-70 +Stacking mounts are available for multiple-amp setup and integrated, clean look. 17 The ZX-Series is KICKER’s high performance workhorse. AMPS ZXS1000.1 ZXS MONO NEW! // Smallest chassis ever, originating from the reliable, powerful ZX-Series // Under 14 inches long for extra space and easier installation // Energy-saving, cool-running boost-converter technology // 1,500-watt and 1,000-watt mono models guaranteed to exceed rated power // Up to +18 dB of boost centered at 40 hertz // ZXRC remote for bass control at your fingertips ZXS1500.1: POWER 2Ω MONO: 1500 DIM A: 13-5/8, 34.5 REMOTE BASS INCLUDED ZXS1000.1: POWER 2Ω MONO: 1000 DIM A: 13-5/8, 34.5 REMOTE BASS INCLUDED all power listed in watts per channel . dimensions in in, cm AMPS ZX MULTI-CHANNEL // The popular ZX700.5 powers an entire system by itself with an added 420-watt sub channel // Choose one of three auto turn-on options that interface with virtually any vehicle’s electrical system // Complete noise-free, clean power due to isolated differential inputs // Optional end caps available for cleaner installation ZX700.5: POWER 2Ω STEREO: 85x4 POWER 4Ω BRIDGED MONO: 165x2 POWER 2Ω MONO: 420x1 DIM A: 20, 50.7 ZX650.4: POWER 2Ω STEREO: 160x4 POWER 4Ω BRIDGED MONO: 320x2 DIM A: 20, 50.7 ZX350.4: POWER 2Ω STEREO: 90x4 POWER 4Ω BRIDGED MONO: 175x2 DIM A: 13-1/2, 34.2 REMOTE BASS CAPABLE REMOTE BASS CAPABLE ZX650.4 all power listed in watts per channel . dimensions in in, cm ZX450.2 AMPS ZX STEREO // Unforgiving 2-channel power that never quits – the ZX-Series is a workhorse // Integrates into most any vehicle’s audio system with isolated differential inputs // Customize your ZX amps with classic vinyl skins – see kicker.com! // Includes internal crossover and KickEQ™ Boost to fine-tune your sound ZX450.2: POWER 2Ω STEREO: 225x2 ZX200.2: POWER 2Ω STEREO: 100x2 POWER 4Ω BRIDGED MONO: 450x1 DIM A: 16-3/4, 42.5 REMOTE BASS CAPABLE POWER 4Ω BRIDGED MONO: 200x1 DIM A: 10-1/4, 26 v AMPS ZX MONO ZX500.1 // Hard-hitting sub power and solid reliability from a standard KICKER force // Energy-saving, cool-running Class-D technology for the long haul // Power flexibility with seven different models that always exceed listed rated power // Optional end caps available for cleaner installation ZX2500.1: POWER 2Ω MONO: 2500 CLASS: D ZX750.1: POWER 2Ω MONO: 750 CLASS: D ZX500.1: POWER 2Ω MONO: 500 CLASS: D ZX400.1: POWER 2Ω MONO: 400 CLASS: D ZX300.1: POWER 2Ω MONO: 300 CLASS: A/B DIM A: 27-1/2, 69.7 DIM A: 14-11/16, 37.3 DIM A: 12, 30.5 DIM A: 10-1/4, 26 DIM A: 13-1/2, 34.2 REMOTE BASS INCLUDED REMOTE BASS INCLUDED REMOTE BASS CAPABLE REMOTE BASS CAPABLE REMOTE BASS CAPABLE all power listed in watts per channel . dimensions in in, cm ” 9-5/8cm 24.4 18 Description/Model 2-1/8” 5.4cm ZXS & ZX // ZXS & ZX // CEA-2006 SPECS A 200.2 450.2 350.4 650.4 700.5 300.1 400.1 500.1 750.1 1000.1 1500.1 2500.1 Rated Pwr., 4Ohm/Ch, 70 150 60 120 14.4Vdc, 1% THD (Watts) 70x4/ 210x1 150 200 250 375 500 750 1500 Signal to Noise Ratio (ref: 1W, A-weighted) -72/-55 -96 -77 -74 -68 -62 -55 -50 -94 -91 -95 -91 AMPS DX MULTI-CHANNEL // DX400.4 [100w x 4] full-range // Flexible 5-channel amp with a 300-watt sub channel // DX600.5 5-channel includes remote bass control for dialing in bass // Accepts output from almost any factory or aftermarket head unit // 0 or 9dB bassboost on DX200.4; up to 12dB boost on DX400.4 // Advanced features with trusted reliable performance //Three automatic turn-on modes (12-volt remote, DC offset, signal sense) DX600.5: POWER 2Ω STEREO: 75x4 POWER 4Ω BRIDGED MONO: 150x1 POWER 2Ω MONO: 300 DIM A: 18-1/8, 46 REMOTE BASS CAPABLE DX400.4: POWER 2Ω STEREO: 100x4 POWER 4Ω BRIDGED MONO: 200x2 DIM A: 16-1/8, 41 DX200.4: POWER 2Ω STEREO: 50x4 POWER 4Ω BRIDGED MONO: 100x2 DIM A: 10-1/4, 26 DX400.4 all power listed in watts per channel . dimensions in in, cm KICKER amps’ actual power always exceeds rated power. AMPS DX STEREO // DX 2-channel power uses isolated differential inputs for noise-free operation // Fine-tune the adjustable KickEQ™ Boost and crossover for your most desirable sound // Small chassis provides plenty of installation flexibility DX300.2: POWER 2Ω STEREO: 150x2 POWER 4Ω BRIDGED MONO: 300x1 DIM A: 12-1/4, 31 DX125.2: POWER 2Ω STEREO: 60x2 POWER 4Ω BRIDGED MONO: 125x1 DIM A: 8-1/4, 21 all power listed in watts per channel . dimensions in in, cm DX125.2 AMPS DX MONO // No-frills, dependable monoblock amps for the deepest lows // Extensive but simple-to-use features for dialing in serious, uncompromising bass // DX250.1 (250 watts) delivers just enough punch for smaller subs DX1000.1: POWER 2Ω MONO: 1000 DIM A: 10-1/4, 26 REMOTE BASS INCLUDED DX500.1: POWER 2Ω MONO: 500 DIM A: 10-1/4, 26 REMOTE BASS INCLUDED DX250.1: POWER 2Ω MONO: 250 DIM A: 10-1/4, 26 REMOTE BASS CAPABLE all power listed in watts per channel . dimensions in in, cm DX1000.1 6” 8-5/1cm 21.1 Description/Model 125.2 300.2 200.4 400.4 500.1 600.5 250.1 500.1 1000.1 Rated Pwr., 4Ohm/Ch, 14.4Vdc, 1% THD (Watts) 30x2 75x2 25x4 50x4 280x1 40x4/150x1 140x1 275x1 550x1 Signal to Noise Ratio (ref: 1W, A-weighted) -84 -85 -85 -85 -75 -85/-80 -75 -75 -75 DX 2-1/4” 5.7cm // DX // CEA-2006 SPECS A 19 AMPS ZX AMP ACCESSORIES // ZX-Series optional end caps are available, hiding exposed wiring for a cleaner, professional look // Use the convenient ZXRC remote bass control from your dash // Control output level for any KICKER IX, ZX, DX, or ZXM amp equipped with a REMOTE BASS jack on its side panel SIGNAL PROCESSORS ZXSUM8 SUMMING UNIT // Sums and balances multiple, varying signals from your factory system into a full-bandwidth, line-level signal // Makes it easier than ever to install aftermarket gear to your factory system // Variable 8V signal drives your KICKER amplifiers with full force over the entire audio spectrum // Adds an aux-input to let you integrate portable media directly to your amp SIGNAL PROCESSORS KX3 3-WAY CROSSOVER // Front and rear high-pass crossovers with a 20x multiplier option on the front // High-pass 18dB/octave, variable frequency 35-400Hz // Sub low-pass crossover 18dB/octave, variable frequency 45-250Hz // Bass boost variable to +18dB at 40 hertz // Remote bass-level controller // 24dB/octave, defeatable subsonic filter at 25 hertz // Two stereo inputs with parallel input option // Three stereo outputs – 5Vrms SIGNAL PROCESSORS 20 KX2 2-WAY CROSSOVER // High-pass crossover 18dB/octave, variable frequency 40-300Hz // Low-pass crossover 18dB/octave, variable frequency 40-300Hz // Low (line-level) or high (speaker-level) stereo input // Variable stereo outputs – 5Vrms // Signal-to-noise ratio - >110dB FULL SPECS AVAILABLE AT: WWW.KICKER.COM SIGNAL PROCESSORS KQ30 PRE-AMP/EQ // Competition-ready stereo/mono equalizer with 30 bands // Cut/boost +/-12dB // Output level 0V-9V // Equalizer defeat/bypass // Separate left and right input and output clipping indicators SIGNAL PROCESSORS KQ5 PRE-AMP/EQ // 5-band parametric equalizer with front and rear fader // Frequency ranges from 40 hertz to 20k hertz // Equalizer defeat/bypass // Remote bass-level control and dual illumination // Input and output clipping indicators ACCESSORIES ZXMRLC DUAL-ZONE REMOTE LEVEL CONTROL // Provides separate level controls for two boat audio zones, the tower and cockpit speakers // Increase volume on tower speakers independently from the boat speakers, or add and control subs or transom speakers // Can be used with an iPod or any MP3 player for applications where traditional head units are not needed FULL SPECS AVAILABLE AT: WWW.KICKER.COM 21 Amazing sound is what put us on the map. Our history is stacked around the full range of frequencies that flows from decks, doors and kick panels in a vehicle. We use only the finest materials and design – Tri-Tech™ 3-layer cones, densely wound voice-coil wire, cast-aluminum baskets, EVC™ extended voice coils, Tetoron® tweeter domes and tweeter output-level jumpers – KICKER drivers are the definition of uncanny clarity and utmost reliability. SPEAKERS Stunning sound using state-of-the-art materials and cutting-edge technologies. QS MATCHED COMPONENTS // The ultimate component loudspeaker system in two sizes of perfectly matched woofers, tweeters and crossovers // Tri-Tech™ woofer cones with foam core sandwiched between woven carbon- poly facings for super-rigidity // Oversized, variable-thickness woofer surrounds maximize cone area, increase efficiency and volume // A copper shorting ring on each woofer’s T-pole top plate prevents distortion. Translation: tight, accurate sound. QS65.2 // Woofers’ copper-clad, aluminum voice-coil wire is lightweight and boosts efficiency // Strong cast-aluminum baskets. Proof we cut no corners. // Large, loud tweeters with generous enclosure volume to play lower frequencies and sound great off-axis // Tetoron® tweeter domes have low diffraction contours around the edge for tremendous frequency response // Additional damping material behind the tweeters extends frequency range // 3-step tweeter attenuation using dependable, oxidation-resistant input jumpers // KICKER’s most sophisticated crossover ever // Crossovers use Mylar® capacitors and high-powered resistors for superior sound // QS60.2 includes 6 x 8 adapter plate for use in Ford and Chrysler vehicles // Tweeters mounting options include angle, flush, ring or coaxially on the woofers QS65.2: WOOFER: 6-1/2, 16.5 TWEETER: 1-3/16, 3 POWER: 200/100 FREQ: 40-22k QS60.2: WOOFER: 6, 16 TWEETER: 1-3/16, 3 POWER: 180/90 FREQ: 50-22k THE ULTIMATE IN QUALITY SOUND speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. SPEAKERS RS MATCHED COMPONENTS // RS is smooth, accurate sonic impact, taking several technological cues from the elite QS-Series // Curvilinear, polypropylene woofer cones are ultra-rigid to prevent distortion // Woofers’ T-cut top plates provide increased magnetic-field strength and cooling // Strong cast-aluminum baskets Performance and features to satisfy the most demanding listener // 25mm Tetoron tweeter domes for exceptionally high detail // Tweeters’ elliptical dome shape delivers superb off-axis response // Selectable, 3-step tweeter output level with reliable input jumpers for just the right dose of high frequencies // Passive crossovers can be configured for bi-amp wiring or 2-way conventional // No room for separates? Go coaxial! Four tweeter mounting options, including coaxially in the woofers’ centers // RS60.2 includes 6 x 8 adapter plate for use in Ford and Chrysler vehicles RS65.2: WOOFER: 6-1/2, 16.5 TWEETER: 1, 2.5 POWER: 200/100 FREQ: 40-21k RS60.2: WOOFER: 6, 16 TWEETER: 1, 2.5 POWER: 180/90 FREQ: 50-21k speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. RS65.2 23 SPEAKERS KS COMPONENTS KS65.2 // Substantial high-performance component upgrade for concert-like quality and audio realism // KS midrange speakers utilize a massive motor structure not found in many aftermarket speakers // Mids’ EVC™ (Extended Voice Coils) and tapered polymer cones recreate precise musical simulation // One-inch calibrated-dome tweeters with phase alignment for revealing high frequencies // Several tweeter mounting options, including coaxially by removing the mids’ bullet plugs KS65.2:WOOFER: 6-1/2, 16.5 TWEETER: 1, 2.5 POWER: 150/75 FREQ: 35-21k KS6.2: WOOFER: 6, 16 TWEETER: 1, 2.5 POWER: 150/75 FREQ: 35-21k KS5.2: WOOFER: 5-1/4, 13 TWEETER: 1, 2.5 POWER: 130/65 FREQ: 38-21k speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. SPEAKERS The massive motor structure on KS speakers make for big power handling KS COAXIALS & 3-WAY // Significant upgrade over factory sound from KICKER’s primary coaxial drop-in replacements // Accurate music reproduction with woofers’ EVC, delivering high excursion and superior bass response // Loud, clear sound provided by woofers’ high-power-handling massive motor structures // 10 different sizes ensures there’s a coaxial system for your vehicle KS693: WOOFER: 6x9, 16x23 TWEETER: 3/4, 2 KS69: WOOFER: 6x9, 16x23 TWEETER: 1, 2.5 KS68: WOOFER: 6x8, 16x20 TWEETER: 3/4, 2 KS65: WOOFER: 6-1/2, 16.5 TWEETER: 3/4, 2 KS60: WOOFER: 6, 16 TWEETER: 3/4, 2 KS525: WOOFER: 5-1/4, 13 TWEETER: 3/4, 2 KS46: WOOFER: 4x6, 10x15 TWEETER: 1/2, 1.3 KS410: WOOFER: 4x10, 10x25 TWEETER: 1/2, 1.3 KS40: WOOFER: 4, 10 TWEETER: 1/2, 1.3 KS35: WOOFER: 3-1/2, 8.9 TWEETER: 1/2, 1.3 POWER: 300/100 POWER: 270/90 POWER: 180/60 POWER: 195/65 POWER: 195/65 POWER: 135/45 POWER: 60/30 POWER: 70/35 POWER: 60/30 POWER: 40/20 FREQ: 30-21k MID:1,2.5 FREQ: 30-21k FREQ: 45-21k FREQ: 40-21k FREQ: 43-21k FREQ: 45-21k FREQ: 50-20k FREQ: 45-20k FREQ: 60-20k FREQ: 80-20k GRILLES GRILLES GRILLES GRILLES GRILLES GRILLES speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. KS693 SPEAKERS KS TWEETERS // High-performance, hard-working tweeters to round out a complete full-range system // Specially developed voice coils and stout neodymium magnets deliver outstanding definition // Dependable high-pass crossover network with illuminated protection circuit // Three choices of mounting options: flush, surface or angled KS13: TWEETER: 1/2, 1.3 POWER: 150/75 FREQ: 4.5k-21k KS20: TWEETER: 3/4, 2 POWER: 190/95 FREQ: 4.5k-21k KS25: TWEETER: 1, 2.5 POWER: 300/150 FREQ: 3.5k-20k speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. 24 KS13 SPEAKERS DS COMPONENTS // Trusted KICKER handiwork provides you a superb component system that’s a definite factory upgrade // Heavy-duty motor structures in the midrange speakers allow for more power handling and louder sound // Reduced woofer mounting depth makes for a simple, drop-in installation // Titanium-domed tweeters have oversized voice coils for outstanding definition of highs DS68.2: WOOFER: 6x8, 16x20 TWEETER: 3/4, 2 POWER: 90/45 FREQ: 40-21k DS65.2: WOOFER: 6-1/2, 16.5 TWEETER: 3/4, 2 POWER: 120/60 FREQ: 35-21k DS6.2: WOOFER: 6, 16 TWEETER: 3/4, 2 POWER: 120/60 FREQ: 35-21k speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. DS68.2 SPEAKERS DS COAXIALS & 3-WAY // KICKER’s entry-level coaxials contain all the necessary features to upgrade the factory sound in your doors // EVC™ (Extended Voice Coils) and a heavy-duty motor structure work together creating the woofers’ remarkable performance // Polypropylene cones and ribbed UV-treated surrounds in the woofers make for precise linear excursion and optimum sound // Eight different midrange sizes fit any cutout; all sport the clearest half-inch tweeters DS693: WOOFER: 6x9, 16x23 DS68: WOOFER: 6x8, 16x20 DS65: WOOFER: 6-1/2, 16.5 DS60: WOOFER: 6, 16 DS525: WOOFER: 5-1/4, 13 DS46: WOOFER: 4x6, 10x15 DS40: WOOFER: 4, 10 DS35: WOOFER: 3-1/2, 8.9 TWEETER: 1/2, 1.3 TWEETER: 1/2, 1.3 TWEETER: 1/2, 1.3 TWEETER: 1/2, 1.3 TWEETER: 1/2, 1.3 TWEETER: 1/2, 1.3 TWEETER: 1/2, 1.3 TWEETER: 1/2, 1.3 POWER: 140/70 POWER: 70/35 POWER: 100/50 POWER: 100/50 POWER: 70/35 POWER: 50/25 POWER: 50/25 POWER: 30/15 FREQ: 30-20k MID: 2, 5 GRILLES FREQ: 45-20k FREQ: 40-20k GRILLES FREQ: 43-20k GRILLES FREQ: 45-20k GRILLES FREQ: 50-20k FREQ: 60-20k GRILLES FREQ: 80-20k speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. DS60 25 Legendary KICKER sound and power translates to the water, forests and mountains as well. Durable equipment designed specifically for your boat, motorcycle, off-road vehicle or utility vehicle makes your work or fun much more enjoyable. From the lakes and harbors to the rocky cliffs and desert sands, KICKER strives to keep you Livin’ Loud in the elements. ELEMENTS PXi50.2 AMPLIFIED CONTROLLER FOR iPOD®/iPHONE® NEW! // Perfect solution for iPod or iPhone users to add tunes to vehicles not previously equipped with a music source // Great for motorcycles, UTVs, boats, hot rods, golf carts, ATVs, snowmobiles, farm tractors, riding lawnmowers or anything else // Weather-resistant amplifier provides 25 watts RMS x 2 (2 Ohms) // Six-foot cable with Apple®-certified dock // Powersports amp features high efficiency, low current draw and great sound quality // Back-lit blue LED, wired remote with basic functions mounts conveniently // Rapidly charges player and pauses when power is turned off // 3.5mm aux-input for other MP3 devices // Contains line-level stereo outputs for use with other amps in a larger system RMS OUTPUT @ 2 OHMS: 25 WATTS X 2 RMS OUTPUT @ 4 OHMS: 15 WATTS X 2 FREQUENCY RESPONSE: 20HZ – 20KHZ (+/- 1DB) RCA PRE-OUT VOLTAGE: 2.5V RMS SIGNAL-TO-NOISE RATIO: 90DB MAX CURRENT DRAW: 10A AUX-INPUT SENSITIVITY: 500MV TO 1.75V IPOD CHARGING: 5V @ 1AV speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. Think of it this way: your iPod’s the head unit, or it’s an amp with iPod control! If you drive it, it needs the PXi50.2. iPod, iPhone and Apple are trademarks of Apple, Inc., registered in the US and other countries. iPod not included 27 ELEMENTS PX POWER AMPLIFIERS NEW! Incredibly small. Low current draw. High efficiency. // Incredibly small footprint created primarily for Powersports vehicles // Designed for motorized vehicles with small battery/charging systems // Great for motorcycles, UTVs, ATVs, golf carts, hot rods, tractors, etc. // New “Direct Amp” technology – uses the vehicle’s charging system as power supply for 90-percent efficiency // High power for open-air listening environment and low current draw // Weather-resistant, conformal-coated circuit board to protect from outdoor conditions // Differential audio circuit reduces engine noise for superb audio clarity // No-rust, stainless-steel mounting hardware PX100.2 2” // 50 watts RMS x 2 channels into a 2-Ohm load // Full-range amp draws less than 10 amps at max output // Only 2” high, 3-1/2” wide and 7” long /2” 3-1 ELEMENTS PX100.2 STEREO // Recommended use with PS5250 Powersports coaxial speakers,with any KM-Series coaxials, component systems, tower systems,or with KS or DS-Series speakers 7” PX100.2: POWER 2Ω STEREO: 50x2 all power listed in watts per channel . PX200.1 ELEMENTS /2” 3-1 2” PX200.1 MONO // 200 watts RMS x 1 channel into a 0.5-Ohm load // Bass amp draws less than 15 amps at max output // Bass boost +6 dB at 60 hertz // Only 2” high, 3-1/2” wide and 4-3/4” long // Recommended use with CompVT 6-1/2-inch (1 Ohm) shallow-mount subwoofer PX200.1: POWER 0.5Ω MONO: 200 all power listed in watts per channel . 4-3/4” ELEMENTS COMPVT CVT651 SUBWOOFER NEW! // New CompVT 6-1/2-inch 1 Ohm designed for harsh demands of Powersports vehicles // Recommended to work best in an infinite-baffle (free-air) design without any enclosure // Weather-proof for saddle-bag installation on a motorcycle // Perfectly suited for low-draw, low-impedance PX-Series Mono Amplifier CVT65: SIZE: 6-1/2, 16.5 POWER: 300/150 IMPEDANCE: 1 SVC speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. 28 ELEMENTS PS POWERSPORTS COAXIALS // Weather-proof, high-efficiency designed as drop-ins for motorcycle fairings, ATVs, UTVs or marine applications // Ultra-clear, extremely loud audio reproduction through a helmet at highway speeds // Lightweight neodymium woofer magnets for high output, superb sound, and proper bike handling // Durable polypropylene cones and inverted surrounds for max excursion in a small space // Neo-titanium-domed tweeters bridge-mounted to withstand extreme vibration // 4-Ohm model for early-model Harley-Davidsons® PS5250: WOOFER: 5-1/4, 1.3 TWEETER: 3/4, 2 POWER: 100/50 FREQ: 60-20k IMPEDANCE: 2 PS52504: WOOFER: 5-1/4, 1.3 TWEETER: 3/4, 2 POWER: 100/50 FREQ: 60-20k IMPEDANCE: 4 speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. ELEMENTS KM10 SUBWOOFER NEW! // Made-for-marine subwoofer works in a sealed or vented enclosure // Durable with a sealed motor, cone and locking terminal covering // Rigid injection-molded cone and Santoprene® surround // UV-treated; corrosion-proof hardware; magnetic shielding KM10: WOOFER: 10, 25 POWER: 300/150 IMPEDANCE: 4 SVC speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. ELEMENTS SKM SUB BOX NEW! // Hammering bass from a compact sealed enclosure // Tough, molded polyethylene enclosure for high water-resistance // Compact for mounting in driver- or passenger-side toe well or rear-seat storage // Uses the extremely durable, punishing KM10 Subwoofer SKM10: SIZE: 10, 25 POWER: 300/150 TYPE: SINGLE DIM A: 8-5/16, 21.1 DIM B: 8-5/16, 21.1 DIM C: 16-1/16, 40.8 DIM D: 23-15/16, 60.8 IMPEDANCE: 4 speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. 29 ELEMENTS KM COAXIALS NEW! // Spectacular high-and middle-frequencies in a drop-in coaxial package // 6-inch woofers with 3/4-inch (6200) and 1/2-inch tweeters (6000 in white) // MAXBasket Geometry™ puts oversized 6.5-inch cones in 6-inch baskets for louder output // Magnetic shielding for minimizing compass and gauge deviation within your boat’s dash KM6200: WOOFER: 6, 16 TWEETER: 3/4, 2 POWER: 195/65 FREQ: 35-21K IMPEDANCE: 4 KM6000: WOOFER: 6, 16 TWEETER: 1/2, 1.3 POWER: 150/50 FREQ: 40-20K IMPEDANCE: 4 speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. KM6200 ELEMENTS KB6000 // KICKER’s “every-place” audio system, great for decks, patios, pool area, shops, RVs, etc. // 8-Ohm impedance load designed specifically to be driven by home receivers // Pair of weather-proof molded enclosures are available in black or white // 2-way, full-range system with 6-1/2-inch woofers and 2 x 5-inch, compression-loaded horn tweeters // 12dB/octave low-pass crossover with impedance compensation perfects the sound // Spring-loaded terminals for secure connection to wiring // Stainless-steel mounting brackets are included KB6000: TYPE: 2-WAY WOOFER: 6-1/2, 16.5 TWEETER: 2x5, 5.1x12.7 POWER: 150/75 FREQ: 55-21K KB6000W: TYPE: 2-WAY WOOFER: 6-1/2, 16.5 TWEETER: 2x5, 5.1x12.7 POWER: 150/75 FREQ: 55-21K IMPEDANCE: 8 IMPEDANCE: 8 speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. ELEMENTS KM6250.2 COMPONENTS NEW! // Remarkable sound quality from KICKER’s marine component system // 6-inch midrange drivers with removable external crossovers and one-inch tweeters // Sealed motors, cones and locking terminal covers for weather protection // UV-treated; corrosion-proof hardware; magnetic shielding KM6250.2: WOOFER: 6, 16 TWEETER: 1, 2.5 POWER: 225/75 FREQ: 35-21K IMPEDANCE: 4 speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. KM6250.2 30 KMT60 LONG-RANGE TOWER SYSTEM: // KMT60 delivers full-range sound to the skier or boarder // Dual boxes each feature a pair of powerful 6.5-inch woofers and horn-loaded 20mm tweeters // Billet-aluminum mounting brackets are roll-bar adjustable // Removable grilles allow you to choose the right look for your craft KM6500.2 TOWER COMPONENT SYSTEM: NEW! // KM6500.2 world’s first horn-loaded, compression-driver component system // Installs perfectly into existing tower speaker cans, even the bolt patterns // Add KM6500 midrange speakers for extra intensity of a six-driver system KM TOWER-SPEAKER EMPTY ENCLOSURES NEW! // 2 models – one for dual sets of drivers and one for a single pair (speakers not included) // Tough ABS, weather-proof empty enclosures with slotted mounting holes for different bolt patterns // Enclosures feature a nine-degree axis rotation in either direction for aiming maximum sound quality // Aluminum tower-pipe clamps (2-5/8”) with three adapter sizes (2-1/4”, 2-3/8”, 2-1/2”) // Durable, stainless-steel push-type connectors // Includes mounting hardware and polyfill // KMTAP adapter pack (sold separately) fits more pipe diameters // Accepts all KICKER 6-1/2-inch component speakers, coaxials and horns KMT60 KM6500.2 KMT60: TYPE: 2-way WOOFER: 6-1/2, 16.5 TWEETER: 3/4, 2 TWEETER HORN: 2x6-1/2, 51x165 POWER: 300/150 DIM: 19-1/16W x 9H x 11D, 48.4W x 22.9H x 28D KM6500.2: TYPE: 2-way WOOFER: 6-1/2, 16.5 TWEETER: N/A TWEETER HORN: 2, 5 POWER: 400/200 KM6500: TYPE: midrange WOOFER: 6-1/2, 16.5 TWEETER: N/A TWEETER HORN: N/A POWER: 200/100 speaker size: in, cm . power handling: watts PEAK/RMS . frequency response in Hz Power handling assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for complete details. Based on measurements of 4Ω models. KM TOWER-SPEAKER ENCLOSURES ELEMENTS ZXM MULTI-STEREO AMPLIFIERS // Provides reliable, weather-resistant power to any KM Marine Speakers // Fuses and power connections meet marine industry standards for protection against the elements // Two-, four-, and 5-channel hybrid for any configuration imaginable // Use the ZXM700.5 to run your entire system with its subwoofer channel for bass // Bass boost up to +18dB // Always exceeds its rated power, documented inside each carton ZXM350.4: POWER 2Ω STEREO: 90x4 POWER 4Ω BRIDGED MONO: 175X2 CLASS D 2Ω MONO: N/A DIM A: 13-1/2, 34.2 ZXM700.5: POWER 2Ω STEREO: 85x4 POWER 4Ω BRIDGED MONO: 165x2 CLASS D 2Ω MONO: 420 DIM A: 20, 50.7 REMOTE BASS ZXM450.2: POWER 2Ω STEREO: 225x2 POWER 4Ω BRIDGED MONO: 420 CLASS D 2Ω MONO: N/A DIM A: 16-3/4, 42.5 REMOTE BASS all power listed in watts per channel . dimensions in in, cm ZXM450.2 ” 9-5/8cm 24.4 ZXM // ZXM // CEA-2006 SPECS Description/Model 2-1/8” 5.4cm ELEMENTS KM TOWER SYSTEMS A 700.5 450.2 Rated Pwr., 4Ohm/Ch, 60x4 14.4Vdc, 1% THD (Watts) 350.4 70x4 210x1 150x2 Signal to Noise Ratio (ref: 1W, A-weighted) -72/-55 -91 -98 31 KICKER provides an additional year of warranty with all amplifier purchases paired with any KICKER Complete Kit or Power Kit. Other brands’ poor-quality, under-spec wiring kits reduce KICKER amplifier performance. A superior-quality KICKER Installation Kit is guaranteed to extend the life of your KICKER amplifiers. Contact any Authorized KICKER Dealer for qualifying Installation Kits and more information, or log onto KICKER.com. 32 ACCESSORIES Z-SERIES FULL-SPEC POWER KITS // Contains KICKER-quality, Hyper-Flex power and ground and heavy-duty fuse holder and fuses // Convenient connectors, zip ties and heat-shrink wrap to ensure reliability // One additional year of KICKER amplifier warranty if purchased with the amp PK8: GAUGE: 8AWG LENGTH: 20 ft PK4: GAUGE: 4AWG LENGTH: 20 ft PKD4: GAUGE: 4 & 8AWG LENGTH: 20 ft / 5 ft PKD1: GAUGE: 1/0 & 4AWG LENGTH: 20 ft / 5 ft Beef up your amp warranty with a KICKER power kit. PK8 ZCK8 ACCESSORIES Z-SERIES FULL-SPEC COMPLETE POWER KITS // KICKER’s reliable Z-Series accessories conveniently packaged together // Z-Series interconnects and speaker wire, Hyper-Flex power and ground, heavy-duty fuse holder // One additional year of KICKER amplifier warranty if purchased with the amp ZCK8: GAUGE: 8AWG TYPE: 2-channel ZCK84: GAUGE: 8AWG TYPE: 4-channel ZCK4: GAUGE: 4AWG TYPE: 2-channel ZCK44: GAUGE: 4AWG TYPE: 4-channel ACCESSORIES DCK4 D-SERIES COMPLETE POWER KITS // Everything required for amp installation in one value-packed kit // Interconnects, power and ground, fuse holder, turn-on wire, and more // All wire made from oxygen-free copper // One additional year of KICKER amplifier warranty if purchased with the amp DCK10: GAUGE: 10AWG TYPE: 2-channel DCK8: GAUGE: 8AWG TYPE: 2-channel DCK4: GAUGE: 4AWG TYPE: 2-channel DPK4 ACCESSORIES D-SERIES POWER KITS // Entry-level kit with Hyper-Flex and Direct-Connect engineering // Power and ground, fuse holder and fuses, turn-on wire, and connectors // All wire made from oxygen-free copper // One additional year of KICKER amplifier warranty if purchased with the amp DPK10: GAUGE: 10AWG TYPE: 2-channel DPK8: GAUGE: 8AWG TYPE: 2-channel DPK4: GAUGE: 4AWG TYPE: 2-channel 33 ACCESSORIES POWER WIRE // Virgin PVC, Hyper-Flex insulation and multi-strand construction for ultimate bend and twist // Cobalt blue and gun-metal gray translucent insulation // Remains ultra-flexible under hot or cold temperature extremes PWB8200: COLOR: BLUE GAUGE: 8AWG LENGTH: 200 ft PWG8200: COLOR: GRAY GAUGE: 8AWG LENGTH: 200 ft PWB4100: COLOR: BLUE GAUGE: 4AWG LENGTH: 100 ft PWG4100: COLOR: GRAY GAUGE: 4AWG LENGTH: 100 ft PWB050: COLOR: BLUE GAUGE: 1/0AWG LENGTH: 50 ft PWG050: COLOR: GRAY GAUGE: 1/0AWG LENGTH: 50 ft Power Cable Chart Recommended Minimum Gauge Size Draw Up to [amps] 4 ft 4 to 7 ft 7 to 10 to 13 to 10 ft 13 ft 16 ft 16 to 19 ft 19 to 22 ft 22 to 28 ft 0-20 14 12 12 10 10 8 8 8 20-35 12 10 8 8 6 6 6 4 35-50 10 8 8 6 6 4 4 4 50-65 8 8 6 4 4 4 4 2 65-85 6 6 4 4 2 2 2 0 85-105 6 6 4 2 2 2 2 0 105-125 4 4 4 2 2 0 0 0 125-150 2 2 2 2 0 0 0 00 ACCESSORIES X-SERIES AUDIO SIGNAL CABLE // High-end, sophisticated signal cable for long-term, trouble-free connection // Tight-grip RCAs with heavy-duty, proprietary-machined metal ends; protective wire-loom jacket // Large gold-plated K-cut collars and dual-split center pins for the most contact and max signal transfer XI21: TYPE: 2-channel XI22: TYPE: 2-channel XI23: TYPE: 2-channel XI24: TYPE: 2-channel XI25: TYPE: 2-channel XI26: TYPE: 2-channel XI44: TYPE: 4-channel XI46: TYPE: 4-channel XIYM: TYPE: Y-adapter, 2 male 1 female XIYF: TYPE: Y-adapter, 2 female 1 male LENGTH: 1 meter LENGTH: 2 meters LENGTH: 3 meters LENGTH: 4 meters LENGTH: 5 meters LENGTH: 6 meters LENGTH: 4 meters LENGTH: 6 meters LENGTH: N/A LENGTH: N/A XI46 ACCESSORIES ZI26 ZISL 34 Z-SERIES AUDIO SIGNAL CABLE // KICKER’s reliable standard, with silver molded RCA ends and identifiable color-coded strain relief // Silver-tinned, oxygen-free copper wire for superior bass response and signal clarity // Sure-grip gold collars and split center pins for ultra-secure connection and signal transfer // ZISL connects speaker wire to RCA inputs ZI21: TYPE: 2-channel ZI22: TYPE: 2-channel ZI23: TYPE: 2-channel ZI24: TYPE: 2-channel ZI25: TYPE: 2-channel ZI26: TYPE: 2-channel ZI44: TYPE: 4-channel ZI46: TYPE: 4-channel ZIYM: TYPE: Y-adapter, 2 male 1 female ZIYF: TYPE: Y-adapter, 2 female 1 male ZISL: TYPE: speaker-level cable LENGTH: 1 meter LENGTH: 2 meters LENGTH: 3 meters LENGTH: 4 meters LENGTH: 5 meters LENGTH: 6 meters LENGTH: 4 meters LENGTH: 6 meters LENGTH: N/A LENGTH: N/A LENGTH: 0.5 meter ACCESSORIES Z-SERIES VIDEO SIGNAL CABLE // Darkest blacks and brightest whites with Hyper-Flex, True 75-Ohm video cable // KICKER uses 75-Ohm cable, the world standard for composite video transmission // Clearest picture with shielded flex-braid center conductors and Teflon dielectric constants ZV1: LENGTH: 1 meter ZV2: LENGTH: 2 meters ZV3: LENGTH: 3 meters ZV4: LENGTH: 4 meters ZV5: LENGTH: 5 meters ZV5 ACCESSORIES XW1620 X-SERIES SPEAKER WIRE // High-end, sophisticated speaker wire for cleanest audio signal and long-term reliability // Tightly twisted, silver-tinned, OFC eliminates unwanted noise // Two wire sizes available for acquiring in bulk or by job // Convenient zip line lets you easily remove outer insulation XW1620: GAUGE: 16AWG LENGTH: 20 ft XW16300: GAUGE: 16AWG LENGTH: 300 ft XW1220: GAUGE: 12AWG LENGTH: 20 ft XW12150: GAUGE: 12AWG LENGTH: 150 ft ACCESSORIES Z-SERIES SPEAKER WIRE // KICKER’s reliable standard featuring noise-killing OFC // Silver-tinned, oxygen-free copper wire for superior bass response and signal clarity // Hyper-Flex insulation and multi-strand construction for ultimate bend and twist ZW1620: GAUGE: 16AWG LENGTH: 20 ft ZW16400: GAUGE: 16AWG LENGTH: 400 ft ZW16400 ACCESSORIES D-SERIES 9-CONDUCTOR SPEAKER WIRE // Convenient, multi-speaker, tightly-twisted OFC for long runs of up to four channels // Also includes conductor for remote turn-on connection DWM9120: TYPE: 22AWG 9-conductor LENGTH: 120 ft 35 ACCESSORIES CBP BRASS HARDWARE // No-fail, nickel-plated, all-brass battery and ground terminals, fuse holders and distribution blocks // Rock-solid termination, extreme current flow and supreme protection for any setup // Direct-Connect engineering for fewest but most secure connections possible BTPN3: GML: CBP: CBN: DB1448: GT1: FHA: USE: positive/negative battery terminal SIZE/TYPE: [1] 1/0 or 4AWG out, [2] 4 or 8AWG out USE: GM/side-post adapter SIZE/TYPE: [1] POS/[1] NEG each USE: competition battery terminal SIZE/TYPE: POS [2] 1/0 or 4AWG out USE: competition battery terminal SIZE/TYPE: POS [2] 1/0 or 4AWG out USE: distribution block SIZE/TYPE: [2] 1/0 or 4AWG in, [4] 4 or 8AWG out USE: ground termination block SIZE/TYPE: [2] 1/0 or 4AWG in, [4] 4 or 8AWG out USE: AFS/ANL fuse holder SIZE/TYPE: N/A ACCESSORIES FUSES // Automotive-grade, platinum-plated AFS and ANL fuses // Consistently provides peak current demands while insuring complete protection // Two fuses per pack so there’s always a spare AFS40: TYPE: AFS AFS50: TYPE: AFS AFS60: TYPE: AFS AFS80: TYPE: AFS ANL100: TYPE: ANL ANL150: TYPE: ANL ANL200: TYPE: ANL ANL300: TYPE: ANL POWER: 40 amp POWER: 50 amp POWER: 60 amp POWER: 80 amp POWER: 100 amp POWER: 150 amp POWER: 200 amp POWER: 300 amp AFS40 ROUND ACCESSORIES SQUARE KICKER Vehicle Design and Fabrication team SUBWOOFER GRILLES // Square or round grilles accessorize and protect your subwoofers // Round-sub grilles fit indicated sizes of all KICKER woofers // Square-sub grilles fit both Solo-Baric L7 and Solo-Baric L3 woofers In back-to-back years of the SEMA Show, the KICKER Vehicle Design and Fabrication team accepted awards from Ford and GM for its over-the-top work on the 2011 KICKER Fiesta SE, and the 2011 KICKER Cruze. Kicker Cruze 36 AWARD WINNING DESIGN Kicker Cruze Interior Kicker Fiesta SE S P ECIFICATIO N S SU BWOOFERS SOLO X : MODEL: SIZE [in, cm]: WEIGHT [lbs, kg]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: MOUNTING DEPTH [in, cm]: MOUNTING DIAMETER [in, cm]: MIN SEALED BOX VOL [cu. ft, L]: MAX SEALED BOX VOL [cu. ft, L]: MIN VENTED BOX VOL [cu. ft, L]: MAX VENTED BOX VOL [cu. ft, L]: S18X 18, 45 103, 46.8 2 or 4 DVC 6000/3000 89.7 11-3/8, 28.9 16-11/16, 42.67 3, 84.96 12, 340 5, 141.6 10, 283.2 SOLO-BARIC L7 : MODEL: SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: MOUNTING DEPTH [in, cm]: MOUNTING DIAMETER [in, cm]: MIN SEALED BOX VOL [cu. ft, L]: MAX SEALED BOX VOL [cu. ft, L]: MIN VENTED BOX VOL [cu. ft, L]: MAX VENTED BOX VOL [cu. ft, L]: S15L7 15, 38 2 or 4 DVC 2000/1000 88.6 8-11/16, 22.1 13-3/4, 34.9 2, 56.64 6, 170 3, 85 6, 170 S12X 12, 30 47, 21.32 2 or 4 DVC 3000/1500 87.7 8-9/16, 21.75 11-1/4, 28.6 1, 28.23 2, 56.46 1.5, 35.4 3, 84.96 S12L7 12, 30 2 or 4 DVC 1500/750 86.9 6-13/16, 17.3 11-1/16, 28.1 1.25, 35.4 2, 56.64 1.75, 49.6 2, 56.64 S10X 10, 25 46, 20.87 2 or 4 DVC 3000/1500 85.7 8-3/8, 21.27 9-3/4, 24.8 1, 28.23 2, 56.46 1.5, 35.4 3, 84.96 S10L7 10, 25 2 or 4 DVC 1200/600 85.9 6-1/4, 15.9 9-5/16, 23.7 1, 28.32 1.25, 35.4 1.25, 35.4 1.25, 35.4 COMPVX : MODEL: SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: MOUNTING DEPTH [in, cm]: MOUNTING DIAMETER [in, cm]: MIN SEALED BOX VOL [cu. ft, L]: MAX SEALED BOX VOL [cu. ft, L]: MIN VENTED BOX VOL [cu. ft, L]: MAX VENTED BOX VOL [cu. ft, L]: CVX15 15, 38 2 or 4 DVC 2000/1000 91.6 8-1/2, 21.5 13-13/16, 35 1.8, 51 5.2, 147 3, 85 5, 142 CVX12 12, 30 2 or 4 DVC 1500/750 87.1 6-11, 16.9 11-1/16, 28 1, 28.23 4.6, 130 1.75, 49.6 2.25, 63.7 CVX10 10, 25 2 or 4 DVC 1200/600 85.7 5-15/16, 15.1 9-3/16, 15.1 0.8, 22.7 3, 85 1.25, 35.4 1.75, 49.6 SOLO-BARIC L3 : MODEL: SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: MOUNTING DEPTH [in, cm]: MOUNTING DIAMETER [in, cm]: MIN SEALED BOX VOL [cu. ft, L]: MAX SEALED BOX VOL [cu. ft, L]: MIN VENTED BOX VOL [cu. ft, L]: MAX VENTED BOX VOL [cu. ft, L]: S15L3 15, 38 2 or 4 DVC 1000/500 90.3 8-1/8, 20.6 13-3/4, 34.9 1.8, 51 5.2, 147 3, 85 5, 142 S12L3 12, 30 2 or 4 DVC 800/400 86.3 6-1/4, 15.8 11-1/16, 28.1 1.25, 35.4 4.6, 130 1.75, 49.6 2.25, 63.7 S10L3 10, 25 2 or 4 DVC 800/400 85.3 5-1/2, 14 9-5/16, 23.7 0.8, 22.7 3, 85 1.25, 35.4 1.75, 49.6 S8L7 8, 20 2 or 4 DVC 900/450 82.4 4-3/4, 12.1 7-1/4, 18.4 0.5, 14.16 0.5, 14.16 0.66, 18.69 0.75, 21.2 COMPVR : MODEL: SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: MOUNTING DEPTH [in, cm]: MOUNTING DIAMETER [in, cm]: MIN SEALED BOX VOL [cu. ft, L]: MAX SEALED BOX VOL [cu. ft, L]: MIN VENTED BOX VOL [cu. ft, L]: MAX VENTED BOX VOL [cu. ft, L]: COMPVT : MODEL: SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: MOUNTING DEPTH [in, cm]: MOUNTING DIAMETER [in, cm]: MIN SEALED BOX VOL [cu. ft, L]: MAX SEALED BOX VOL [cu. ft, L]: MIN VENTED BOX VOL [cu. ft, L]: MAX VENTED BOX VOL [cu. ft, L]: CVR15 15, 38 2 or 4 DVC 1000/500 89.2 8-3/16, 20.7 13-11/16, 34.7 1.8, 51 5.2, 147 3, 85 5, 142 CVT12 12, 30 2 or 4 SVC 800/400 87.1 4-3/8, 11.1 11, 28.1 1, 28.3 4.6, 130 1.75, 49.6 2.25, 63.7 CVR12 12, 30 2 or 4 DVC 800/400 86.9 6-1/4, 15.9 11, 27.8 1, 28.3 4.6, 130 1.75, 49.6 2.25, 63.7 CVT10 10, 25 2 or 4 SVC 800/400 87.2 4-1/4, 10.8 9-3/16, 23.3 0.8, 22.7 3, 85 1.25, 35.4 1.75, 49.6 CVR10 10, 25 2 or 4 DVC 800/400 83.6 5-1/2, 14 9-3/16, 23.3 0.8, 22.7 3, 85 1.25, 35.4 1.75, 49.6 CVT8 8, 20 2 or 4 SVC 400/200 84.8 3-7/16, 8.7 7-1/16, 17.8 0.4, 11.3 1.8, 51 0.8, 22.7 1.2, 34 CVR8 8, 20 2 or 4 DVC 400/200 82.8 4-1/4, 10.8 6-15/16, 17.6 0.4, 11.3 1.8, 51 0.8, 22.7 1.2, 34 CVT65 6-1/2, 16.5 1, 2 or 4 SVC 300/150 84.6 2-7/8, 7.3 5-9/16, 14 0.2, 5.66 3, 85 N/A N/A COMP : MODEL: SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: MOUNTING DEPTH [in, cm]: MOUNTING DIAMETER [in, cm]: MIN SEALED BOX VOL [cu. ft, L]: MAX SEALED BOX VOL [cu. ft, L]: MIN VENTED BOX VOL [cu. ft, L]: MAX VENTED BOX VOL [cu. ft, L]: C15 15, 38 2,4, 8 SVC 500/250 90.3 7-7/16, 18.9 13-11/16, 34.7 2.25, 63.7 5, 141.6 3, 85 4, 113.3 C12 12, 30 2,4, 8 SVC 300/150 88.3 5-7/8, 14.8 11, 27.9 1.25, 35.4 3.5, 99.1 1.75, 49.6 2.25, 63.7 C10 10, 25 2,4, 8 SVC 300/150 86.2 5-1/16, 12.8 9-1/8, 23.1 1, 28.3 2.4, 68 1.25, 35.4 1.75, 49.6 C8 8, 20 2,4, 8 SVC 200/100 85.6 4-1/16, 10.3 6-15/16, 17.5 0.5, 14.2 1.2, 34 0.66, 18.7 1.2, 34 COMP D4 : MODEL: SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: MOUNTING DEPTH [in, cm]: MOUNTING DIAMETER [in, cm]: MIN SEALED BOX VOL [cu. ft, L]: MAX SEALED BOX VOL [cu. ft, L]: MIN VENTED BOX VOL [cu. ft, L]: MAX VENTED BOX VOL [cu. ft, L]: C15D4 15, 38 4 DVC 600/300 90.3 7-7/16, 18.9 13-11/16, 34.7 2.25, 63.7 5, 141.6 3, 85 4, 113.3 C12D4 12, 30 4 DVC 400/200 88.3 5-7/8, 14.8 11, 27.9 1.25, 35.4 3.5, 99.1 1.75, 49.6 2.25, 63.7 37 Model Subwoofer (in, cm) RMS power (watts), 14.4V Frequency response (Hz) Crossover Phase switch Input sensitivity: KickEQ boost Remote bass Box Depth (in, cm) Box Height (in, cm) Box Width (in, cm) Weight (lbs, kg) MODEL: NO. OF WOOFERS/SIZE [in, cm]: RMS POWER [watts], 14.4V: BOX TOP DEPTH [in, cm]: BOX BOTTOM DEPTH [in, cm]: BOX HEIGHT [in, cm]: BOX WIDTH [in, cm]: WEIGHT [lbs, kg]: COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: CROSSOVER: SUBSONIC FILTER: PHASE SWITCH: INPUT SENSITIVITY: LOW LEVEL HIGH LEVEL KickEQ™ BOOST: REMOTE BASS: MODEL: WOOFER: BOX TYPE: CLASS-D POWER [watts RMS], 14.4V: BOX TOP DEPTH [in, cm]: BOX BOTTOM DEPTH [in, cm]: BOX HEIGHT [in, cm]: BOX WIDTH [in, cm]: WEIGHT [lbs, kg]: HS8 8, 20 150 25-120 12dB/octave low pass at 50-120Hz; 24dB/octave high pass at 25Hz 0°/180° Low level 125mV-5V High level 250mV-10V variable to +6dB @ 40Hz included 13-7/8, 35.2 3-1/8, 7.94 9-3/8, 23.8 9.4, 4.3 PHD12 [2] 12, 30 200 7-11/16, 195 11-1/4, 285 14-15/16, 380 31-1/2, 800 43.2, 19.5 PH12 [1] 12, 30 100 7-11/16, 195 11-1/4, 285 14-15/16, 380 16-13/16, 427 25, 11.3 PT10 [1] 10, 25 100 4-11/16, 118 7-11/16, 195 12-13/16, 325 19-5/16, 490 18, 8.2 125mV-5V 250mV-10V variable to +6dB @ 40Hz included L7 SUB BOXES MODEL: TYPE: NO. OF WOOFERS/SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: BOX TOP DEPTH [in, cm]: BOX BOTTOM DEPTH [in, cm]: BOX HEIGHT [in, cm]: BOX WIDTH [in, cm]: TS10L7 thin-profile [1] 10, 25 2 1200/600 85.9 6-11/16, 16.9 10, 25.4 15, 38.1 21-1/2, 54.6 VS12L7 single [1] 12, 30 2 1500/750 86.9 14-11/16, 37.2 18, 45.7 16, 40.6 18-3/4, 47.5 DS12L7 dual [2] 12, 30 2 3000/1500 89.9 16-3/8, 41.5 19-9/16, 49.7 16, 40.6 32-3/8, 82.2 L3 SUB BOXES MODEL: TYPE: NO. OF WOOFERS/SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: BOX TOP DEPTH [in, cm]: BOX BOTTOM DEPTH [in, cm]: BOX HEIGHT [in, cm]: BOX WIDTH [in, cm]: TS10L3 thin-profile [1] 10, 25 2 800/400 85.3 6-11/16, 16.9 10, 25.4 15, 38.1 21-1/2, 54.6 VS12L3 single [1] 12, 30 2 800/400 86.3 14-11/16, 37.2 18, 45.7 16, 40.6 18-3/4, 47.5 DS12L3 dual [2] 12, 30 2 1600/800 89.3 16-3/8, 41.5 19-9/16, 49.7 16, 40.6 32-3/8, 82.2 OMP VR SUB BOXES C MODEL: TYPE: NO. OF WOOFERS/SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: BOX TOP DEPTH [in, cm]: BOX BOTTOM DEPTH [in, cm]: BOX HEIGHT [in, cm]: BOX WIDTH [in, cm]: 38 PT8 [1] 8, 20 100 4, 102 6-5/8, 168 11-1/4, 285 16-15/16, 430 13.8, 6.2 PECVR12 Comp VR vented 450 5, 12.7 8-1/4, 21 13-1/4, 33.7 18, 45.7 35, 16 400 11-1/4, 28.6 14-1/2, 36.8 16, 40.6 17-1/16, 43.3 38, 17 25-200 12dB/octave low pass at 50-200Hz 0°/180° 125mV-5V 250mV-10V variable to +12dB @ 40Hz included 25-120 12dB/octave low pass at 50-120Hz 24dB/octave high pass at 25Hz 0°/180° LOADED ENCLOSURES COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: CROSSOVER: PHASE SWITCH: INPUT SENSITIVITY: LOW LEVEL HIGH LEVEL KickEQ™ BOOST: REMOTE BASS: PES10C Solo Classic sealed VCVR12 DCVR10 single dual [1] 12, 30 [2] 10, 25 2 or 4 2 800/400 1600/800 95 96.5 11-3/8, 28.8 13-1/2, 34.3 14-5/8, 37 16-1/2, 41.8 16-1/16, 40.7 14-1/8, 35.9 17-13/16, 45.1 28-3/4, 73 DCVR12 dual [2] 12, 30 2 1600/800 98 14-1/8, 35.8 17-3/8, 44 16-1/16, 40.7 32-11/16, 82.9 COMP VT SUB BOXES MODEL: TYPE: SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: BOX TOP DEPTH [in, cm]: BOX BOTTOM DEPTH [in, cm]: BOX HEIGHT [in, cm]: BOX WIDTH [in, cm]: COMP SUB BOXES MODEL: TYPE: NO. OF WOOFERS/SIZE [in, cm]: IMPEDANCE [Ohms]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: BOX TOP DEPTH [in, cm]: BOX BOTTOM DEPTH [in, cm]: BOX HEIGHT [in, cm]: BOX WIDTH [in, cm]: TCVT8 thin-profile 8, 20 2 or 4 400/200 85.5 4-1/8, 10.5 5-1/16, 12.8 9-1/16, 23 16-5/16, 41.4 TC10 thin-profile [1] 10, 25 2 or 4 300/150 93.8 4-3/4, 12 7-11/16, 19.5 13-3/4, 38.4 21-3/4, 55.1 TCVT10 thin-profile 10, 25 2 or 4 800/400 96.5 3-7/8, 9.7 6-1/2, 16.4 11-3/8, 28.8 19-11/16, 50 VC12 single [1] 12, 30 2 or 4 300/150 95.3 11-1/4, 28.5 14-5/8, 37.1 16-1/8, 40.9 17-11/16, 44.8 TCVT12 thin-profile 12, 30 2 or 4 800/400 98 3-7/8, 9.7 6-15/16, 17.6 13-7/16, 34.1 21-13/16, 55.3 DC10 dual [2] 10, 25 2 600/300 98.4 13-1/2, 34.2 16-3/8, 41.5 14, 35.5 28-1/2, 72.3 DC12 dual [2] 12, 30 2 600/300 99.9 13-7/8, 35.2 17-1/4, 43.8 16, 40.5 32-7/16, 82.3 AMPLIFIERS IX-SERIES FULL-RANGE CLASS-D MULTI-CHANNEL AMPS MODEL [at 14.4V]: IX500.4 POWER [watts/ch], 2 OHM STEREO: 125 x 4 POWER [watts/ch], 4 OHM BRIDGED MONO: 250 x 2 POWER [watts/ch], 2 OHM MONO: N/A REMOTE BASS INCLUDED: no DIMENSIONS [in, cm]: [all models 2-3/16H x 7-7/8W x ... L] 11-3/8 [all models 55H x 200W x ... L] 288 COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: SUBSONIC FILTER [IX.5 only]: KickEQ™ BOOST: IX1000.5 125 x 4 250 x 2 500 yes 11-3/8 288 20-20k, +0/-1dB high level 250mV-10V, low level 125mV-5V >98dB, a-weighted, re: rated power [IX.5 >90dB, a-weighted, re: rated power] 12dB/octave, variable 50-200Hz selectable high pass, low pass or all pass; [IX.5 12dB/octave, full-range channels variable 50- 200Hz, selectable high or all pass; 24dB/ octave, sub channel variable 50-200Hz, low pass only] - 24dB/octave, sub channel high-pass fixed at 25Hz variable to +18dB, centered @ 40Hz [IX.5 boost sub channel only] AMPLIFIERS IX-SERIES MONOBLOCK AMPS MODEL [at 14.4V]: POWER [watts], 2 OHM MONO: REMOTE BASS INCLUDED: DIMENSIONS [in, cm]: [all models 2-3/16H x 7-7/8W x ... L] [all models 55H x 200W x ... L] IX1000.1 1000 yes IX500.1 500 yes 9-3/8 238 9-3/8 238 COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: SUBSONIC FILTER: KickEQ™ BOOST: 25-200, +0/-1dB high level 250mV-10V, low level 125mV-5V >95dB, a-weighted, re: rated power 24dB/octave, variable 50-200Hz low-pass only - 24dB/octave high-pass fixed at 25Hz variable to +18dB, centered @ 40Hz ZX-SERIES MONOBLOCK AMPS MODEL [at 14.4V]: POWER [watts], CLASS D 2 OHM MONO: REMOTE BASS INCLUDED: REMOTE BASS CAPABLE: DIMENSIONS [in, cm]: [all models 2-1/8H x 9-5/8W x ... L] [all models 5.4H x 24.4W x ... L] COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: SUBSONIC FILTER: KickEQ™ BOOST: DX-SERIES MONOBLOCK AMPS MODEL [at 14.4V]: POWER [watts], 2 OHM MONO: REMOTE BASS INCLUDED: REMOTE BASS CAPABLE: DIMENSIONS [in, cm]: [all models 2-1/4H x 8-5/16W x ... L] [all models 5.7H x 21.1W x ... L] COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: SUBSONIC FILTER: KickEQ™ BOOST: COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: KickEQ™ BOOST: 20-20k, +0/-1dB high level 250mV-10V, low level 125mV-5V >95dB, a-weighted, re: rated power 12dB/octave, variable 50-200Hz selectable high pass, low pass or all pass; variable to +18dB, centered @ 40Hz ZX2500.1 2500 yes yes ZXS1500.1 1500 yes yes ZXS1000.1 1000 yes yes ZX750.1 750 yes yes ZX500.1 500 no yes ZX400.1 400 no yes ZX300.1 300 (Class A/B) no yes 27-1/2 69.7 13-5/8 34.5 13-5/8 34.5 14-11/16 37.3 12 30.5 10-1/4 26 13-1/2 34.2 25-200 [ZX300.1 25-20k], +0/-1dB high level 250mV-10V, low level 125mV-5V >95dB, a-weighted, re: rated power 24dB/octave, variable 50-200Hz [ZX300.1 fixed at 80Hz], low pass only; - 24dB/octave high-pass fixed at 25Hz variable to +18dB [ZX300.1 selectable 0 or +12dB], centered @ 40Hz ZX-SERIES MULTI-CHANNEL AMPS MODEL [at 14.4V]: POWER [watts/ch], 2 OHM STEREO: POWER [watts/ch], 4 OHM BRIDGED MONO: POWER [watts/ch], CLASS D 2 OHM MONO: REMOTE BASS CAPABLE [sold sep.]: DIMENSIONS [in, cm]: [all models 2-1/8H x 9-5/8W x ... L] [all models 5.4H x 24.4W x ... L] COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: SUBSONIC FILTER [ZX.5 only]: KickEQ™ BOOST: IX-SERIES FULL-RANGE CLASS-D STEREO AMPLIFIER MODEL [at 14.4V]: IX500.2 POWER [watts/ch], 2 OHM STEREO: 250 x 2 POWER [watts/ch], 4 OHM BRIDGED MONO: 500 REMOTE BASS CAPABLE: no DIMENSIONS [in, cm]: [all models 2-3/16H x 7-7/8W x ... L] 9-3/8 [all models 5.5H x 20W x ... L] 23.8 ZX650.4 160 x 4 320 x 2 N/A yes ZX350.4 90 x 4 175 x 2 N/A no ZX700.5 85 x 4 165 x 2 420 yes 20 50.7 13-1/2 34.2 20 50.7 20-20k [ZX.5 25-20kHz], +0/-1dB high level 250mV-10V, low level 125mV-5V >98dB, a-weighted, re: rated power 12dB/octave, variable 50-200Hz selectable high pass, low pass or all pass; [ZX.5 12dB/octave, full-range channels variable 50Hz-200Hz, selectable high or all pass; 24dB/octave, sub channel variable 50-200Hz, low pass only] - 24dB/octave, sub channel high-pass fixed at 25Hz variable to +18dB, centered @ 40Hz [ZX.5 boost sub channel only] DX1000.1 1000 yes N/A DX500.1 500 yes N/A DX250.1 250 no yes 10-1/4 26 10-1/4 26 10-1/4 26 25-200, +0/-1dB high level 250mV-10V, low level 125mV-5V >95dB, a-weighted, re: rated power 18dB/octave, variable 50-200Hz, low pass only [DX250.1 24dB/octave, fixed @ 80Hz] - 18dB/octave high-pass variable 10-30Hz [DX250.1 24dB/octave high-pass fixed @ 25Hz] variable to +12dB [DX250.1 selectable 0 or +9dB], centered @ 40Hz ZX-SERIES STEREO AMPS MODEL [at 14.4V]: POWER [watts/ch], 2 OHM STEREO: POWER [watts/ch], 4 OHM BRIDGED MONO: REMOTE BASS CAPABLE [sold sep.]: DIMENSIONS [in, cm]: [all models 2-1/8H x 9-5/8W x ... L] [all models 5.4H x 24.4W x ... L] COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: KickEQ™ BOOST: ZXSUM8 SUMMING INTERFACE MAX VOLTAGE IN [RMS]: AUX-IN MAX VOLTAGE [RMS]: CH. 1-3 MAX VOLTAGE OUT [RMS]: CH. 4 MAX VOLTAGE OUT [RMS]: CH. 1-3 S-to-N RATIO [dB ref. 1V]: CH. 4 S-to-N RATIO[dB ref. 1V <200Hz]: REMOTE ATTENUATION RANGE [dB]: FREQ. RESPONSE [Hz]: CH. 1, 2, 3, 4 GAIN RANGE [dB]: AUX-IN GAIN RANGE [dB]: FUSE: WIDTH [in, cm]: DEPTH [in, cm]: HEIGHT [in, cm]: ZX450.2 225 x 2 450 yes ZX200.2 100 x 2 200 no 16-3/4 42.5 10-1/4 26 20-20k, +0/-1dB high level 250mV-10V, low level 125mV-5V >95dB, a-weighted, re: rated power 12dB/octave, variable 50-200Hz selectable high pass, low pass or all pass; variable to +18dB, centered @ 40Hz 40 40 9 6 90 90 0 to -27 20-22k -30 to +4 -65 to +18 2 amperes 10-1/2, 26.5 5-3/4, 14.6 1-3/8, 3.5 39 DX-SERIES MULTI-CHANNEL AMPS MODEL [at 14.4V]: POWER [watts/ch], FULL-RANGE 2 OHM STEREO: POWER [watts/ch], FULL-RANGE 4 OHM BRIDGED MONO: POWER [watts/ch], CLASS D 2 OHM MONO: REMOTE BASS CAPABLE [sold sep.]: DIMENSIONS [in, cm]: [all models 2-1/4H x 8-5/16W x ... L] [all models 5.7H x 21.1W x ... L] COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: SUBSONIC FILTER [DX.5 only]: KickEQ™ BOOST: DX400.4 100 x 4 200 x 2 N/A no DX200.4 50 x 4 100 x 2 N/A no DX600.5 75 x 4 150 x 2 300 yes 16-1/8 41 10-1/4 26 18-1/8 46 DX-SERIES STEREO AMPS MODEL [at 14.4V]: POWER [watts/ch], 2 OHM STEREO: POWER [watts/ch], 4 OHM BRIDGED MONO: REMOTE BASS CAPABLE: DIMENSIONS [in, cm]: [all models 2-1/4H x 8-5/16W x ... L] [all models 5.7H x 21.1W x ... L] 20-20k [DX.5 25-20kHz], +0/-1dB high level 250mV-10V, low level 125mV-5V >95dB, a-weighted, re: rated power 12dB/octave, variable 50-200Hz selectable high pass, low pass or all pass; [DX200.418dB/octave, high-pass fixed @ 100Hz, low-pass fixed @ 80Hz]; [DX.5 12dB/octave, full- range channels variable 50Hz-200Hz, selectable high or all pass; 24dB/octave, sub channel variable 50-200Hz, low pass only] - 24dB/octave, sub channel high-pass fixed at 25Hz variable to +12dB [DX200.4 selectable 0 or +9dB), centered @ 40Hz (DX.5 boost sub channel only] COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: KickEQ™ BOOST: DX300.2 150 x 2 300 no DX125.2 60 x 2 125 no 12-1/4 31 8-1/4 21 20-20k, +0/-1dB high level 250mV-10V, low level 125mV-5V >95dB, a-weighted, re: rated power 12dB/octave, variable 50-200Hz selectable high pass, low pass or all pass; [DX125.2 18dB/ octave, high-pass fixed @ 100Hz, low-pass fixed @ 80Hz] variable to +12dB [DX125.2 selectable 0 or +9dB], centered @ 40Hz COMPONENT AND COAXIAL SPEAKER SYSTEMS QS-SERIES MATCHED COMPONENT SYSTEMS MODEL: QS65.2 WOOFERS [in, cm]: 6-1/2, 16.5 TWEETERS [in, cm]: 1-3/16, 3 POWER WATTS [peak/RMS]: 200/100 SENSITIVITY [dB 1w/1m]: 87 FREQ. RESPONSE [Hz]: 40-22k WOOFER MOUNTING DEPTH [in, cm]: 5-7/16, 13.8 WOOFER MOUNTING DIAMETER [in, cm]: <= 2.5, 6.35 CROSSOVER POINT [Hz]: 2.8k CROSSOVER SLOPE [dB/octave]: 24 hi/12 lo TWEETER OUTPUT LEVEL [dB]: 0, +3, +6 QS60.2 6, 16 1-3/16, 3 180/90 86 50-22k 5-1/16, 12.9 <= 2.5, 6.35 2.8k 24 hi/12 lo 0, +3, +6 KS-SERIES COMPONENT SYSTEMS MODEL: KS65.2 KS6.2 KS5.2 WOOFERS [in, cm]: 6-1/2, 16.5 6, 16 5-1/4, 13 TWEETERS [in, cm]: 1, 2.5 1, 2.5 1, 2.5 TWEETER DOME MATERIAL: titanium titanium titanium IMPEDANCE OHMS, RATED [DC resistance]: 4 [3.3] 4 [2.9] 4 [2.9] POWER WATTS [peak/RMS]: 150/75 150/75 130/65 SENSITIVITY [dB 1w/1m]: 88 88 88 FREQ. RESPONSE [Hz]: 35-21k 35-21k 38-21k WOOFER MOUNTING DEPTH [in, cm]: 2-1/8, 5.4 1-15/16, 4.9 2, 5.1 FLUSH MOUNT TWEETER DEPTH [in, cm]: 13/16, 2.1 13/16, 2.1 13/16, 2.1 CROSSOVER POINT [Hz]: 4k 4k 4k CROSSOVER SLOPE [dB/octave]: 12 hi/12 lo 12 hi/12 lo 12 hi/12 lo HIGH FREQ. ATTENUATION LEVEL [dB]: 0, +4.5, +9 0, +4.5, +9 0, +4.5, +9 GRILLES: included included included KS-SERIES COAXIAL & 3-WAY SPEAKERS MODEL: KS35 KS40 KS46 WOOFERS [in, cm]: 3-1/2, 8.9 4, 10 4x6, 10x16 MIDRANGES [in, cm]: N/A N/A N/A TWEETERS [in, cm]: 1/2, 1.3 1/2, 1.3 1/2, 1.3 IMPEDANCE [Ohms]: 4 4 4 MAX REC. AMP POWER [watts peak]: 40 60 60 MAX REC. AMP POWER [watts RMS]: 6-20 6-30 6-30 SENSITIVITY [dB 1w/1m]: 88 88 88 FREQ. RESPONSE [Hz]: 80-20k 60-20k 50-20k MOUNTING DEPTH [in, cm]: 1-9/16, 4 1-3/16, 4.6 1-3/16, 4.6 MOUNTING DIAMETER [in, cm]: 3-3/16, 8.1 3-11/16, 9.4 3-1/2x5-3/4, 8.9x14.6 GRILLES: no yes no CONTINUED MODEL: WOOFERS [in, cm]: MIDRANGES [in, cm]: TWEETERS [in, cm]: IMPEDANCE [Ohms]: MAX REC. AMP POWER [watts peak]: MAX REC. AMP POWER [watts RMS]: SENSITIVITY [dB 1w/1m]: FREQ. RESPONSE [Hz]: MOUNTING DEPTH [in, cm]: MOUNTING DIAMETER [in, cm]: GRILLES: 40 KS60 6, 16 N/A 3/4, 2.0 4 195 6-65 90 43-21k 1-15/16, 4.9 5-5/8, 14.3 yes KS65 6-1/2, 16.5 N/A 3/4, 2.0 4 195 6-65 90 40-21k 2-1/8, 5.4 5x7, 12.7x17.8 yes RS-SERIES MATCHED COMPONENT SYSTEMS MODEL: RS65.2 WOOFERS [in, cm]: 6-1/2, 16.5 TWEETERS [in, cm]: 1, 2.5 POWER WATTS [peak/RMS]: 200/100 SENSITIVITY [dB 1w/1m]: 87 FREQ. RESPONSE [Hz]: 40-21k WOOFER MOUNTING DEPTH [in, cm]: 5-7/16, 13.8 WOOFER MOUNTING DIAMETER [in, cm]: 2-7/16, 6.2 CROSSOVER POINT [Hz]: 3.5k CROSSOVER SLOPE [dB/octave]: 18 hi/12 lo TWEETER OUTPUT LEVEL [dB]: 0, +3, +6 KS-SERIES TWEETERS MODEL: TWEETERS [in, cm]: DOME MATERIAL: MAGNET TYPE: IMPEDANCE OHMS, RATED [DC resistance]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: FREQ. RESPONSE [Hz]: FLUSH MOUNTING DEPTH [in, cm]: FLUSH MOUNTING HOLE DIAMETER [in, cm]: CROSSOVER POINT [Hz]: HIGH-PASS CROSSOVER SLOPE [dB/octave]: KS410 4x10, 10x25 N/A 1/2, 1.3 4 70 6-35 88 45-20k 2-7/16, 6.2 3-7/8x9-5/16, 9.8x23.7 no KS68 6x8, 16x20 N/A 3/4, 2.0 4 180 6-60 90 45-21k 2-3/8, 6 6x8-9/16,15.2x21.7 no KS69 6x9, 16x23 N/A 1, 2.54 4 270 6-90 92 30-21k 3-3/16, 8.1 6x8-9/16,15.2x21.7 yes KS525 5-1/4, 13 N/A 3/4, 2.0 4 135 6-45 90 45-21k 2, 5.1 4-9/16, 11.6 yes KS693 3-WAY 6x9, 16x23 1, 2.54 3/4, 2.0 4 300 6-100 92 30-21k 3-3/16, 8.1 6x8-9/16,15.2x21.7 yes RS60.2 6, 16 1, 2.5 180/90 87 50-21k 5, 12.7 2-5/16, 5.8 3.5k 18 hi/12 lo 0, +3, +6 KS13 1/2, 1.3 PEI neodymium 4 [3] 150/75 92 4.5k-21k 9/16, 1.4 1-9/16, 4 4.5k 12 KS20 3/4, 2 aluminum neodymium 4 [3] 190/95 92 4.5k-21k 9/16, 1.4 1-9/16, 4 4.5k 12 KS25 1, 2.5 titanium neodymium 4 [3] 300/150 94 3.5k-21k 13/16, 2.1 1-15/16, 4.9 3.5k 18 S-SERIES COAXIAL & 3-WAY SPEAKERS D MODEL: DS35 WOOFERS [in, cm]: 3-1/2, 8.9 MIDRANGES [in, cm]: N/A TWEETERS [in, cm]: 1/2, 1.3 IMPEDANCE [Ohms]: 4 MAX REC. AMP POWER [watts peak]: 30 MAX REC. AMP POWER [watts RMS]: 6-15 SENSITIVITY [dB 1w/1m]: 88 FREQ. RESPONSE [Hz]: 80-20k MOUNTING DEPTH [in, cm]: 1-3/4, 4.4 MOUNTING DIAMETER [in, cm]: 3-1/16, 7.8 GRILLES: no DS40 4, 10 N/A 1/2, 1.3 4 50 6-25 88 60-20k 1-13/16, 4.6 3-3/4, 9.5 yes DS46 4x6, 10x16 N/A 1/2, 1.3 4 50 6-25 88 50-20k 1-7/8, 4.7 4x6, 10.1x15.2 no DS525 5-1/4, 13 N/A 1/2, 1.3 4 70 6-35 90 45-20k 1-7/8, 4.8 4-1/2, 11.5 yes DS60 6, 16 N/A 1/2, 1.3 4 100 6-50 90 43-20k 1-7/8, 4.8 4-13/16, 12.3 yes POWERSPORTS AND MARINE PS-SERIES POWERSPORTS COAXIAL SPEAKERS MODEL: PS5250 WOOFERS [in, cm]: 5-1/4, 13 TWEETERS [in, cm]: 3/4, 2.0 IMPEDANCE [Ohms]: 2 or 4 POWER [watts peak/RMS]: 100/50 SENSITIVITY [dB 1w/1m]: 88.3 FREQ. RESPONSE [Hz]: 60-20k MOUNTING DEPTH [in, cm]: 2-3/16, 5.6 MOUNT. DIAMETER [in, cm]: 4-7/8, 12.4 WEIGHT [oz, g]: 12.6, 358 GRILLES: For H-D batwing fairing PX-SERIES POWERSPORTS AMPLIFIERS MODEL (at 14.4V): POWER (watts/ch), 0.4 OHM MONO: POWER (watts/ch), 1 OHM MONO: POWER (watts/ch), 2 OHM STEREO: POWER (watts/ch), 4 OHM STEREO: FREQUENCY RESPONSE (Hz): SIGNAL-TO-NOISE RATIO: DIMENSIONS (in, mm): (all models 2, 50.6H x 3-1/2, 88.2W x … L) PXi50.2 MODEL: RMS OUTPUT @ 2 OHMS RMS OUTPUT @ 4 OHMS FREQUENCY RESPONSE RCA PRE-OUT VOLTAGE SIGNAL-TO-NOISE RATIO MAX CURRENT DRAW AUX-INPUT SENSITIVITY IPOD CHARGING PX200.1 200 100 -- -- 40-250 90dB 4-3/4, 120.7 PX100.2 --50 x 2 25 x 2 20-20k 85dB 7, 177.8 COMMON TO ALL MODELS INPUT SENSITIVITY: 125mV-5V low level, 250mV-10V high level ELECTRONIC CROSSOVER: (200.1) selectable 100Hz or 250Hz lowpass, 24dB/octave; (100.2) selectable 100Hz, 250Hz or off; hi-pass only; 24dB/octave SUBSONIC FILTER: (200.1) Fixed at 40Hz, 24dB/octave BASS BOOST: (200.1) selectable on or off, +6dB centered at 60Hz PXi50.2 25 WATTS X 2 15 WATTS X 2 20HZ – 20KHZ (+/- 1DB) 2.5V RMS 90DB 10A 500MV TO 1.75 V 5V @ 1A DS65 6-1/2, 16.5 N/A 1/2, 1.3 4 100 6-50 90 40-20k 1-13/16, 4.6 5-1/2, 14 yes KMT60 MARINE LONG-RANGE TOWER SYSTEM MODEL: KMT60 TYPE: 2-way full-range WOOFERS [in, cm]: 6-1/2, 16.5 TWEETERS [in, cm]: 3/4, 2.0 EXPONENTIAL HORN [in, cm]: 2x6-1/2, 5.1x16.5 POWER [watts peak/RMS]: 300/150 SENSITIVITY [dB 1w/1m]: 93 FREQ. RESPONSE [Hz]: 50-21k BOX STANDARD DIMS [in]: 19-1/16Wx9Hx11D BOX METRIC DIMS [cm]: 48.4Wx22.9Hx28D KM-SERIES MARINE COMPONENT SYSTEMS MODEL: KM6250.2 WOOFERS [in, cm]: 6, 16 TWEETERS [in, cm]: 1, 2.5 POWER WATTS [peak/RMS]: 225/75 SENSITIVITY [dB 1w/1m]: 88 FREQ. RESPONSE [Hz]: 35-21k WOOFER MOUNTING DEPTH [in, cm]: 2-7/8, 7.2 MOUNTING HOLE DIAMETER [in, cm]:5-1/8, 13 CROSSOVER POINT [Hz]: 4k CROSSOVER SLOPE [dB/octave]: 18 hi/12 lo GRILLES: bolt-thru grilles included KM-SERIES MARINE SUB BOX MODEL: SKM10 TYPE: sealed single SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 4 POWER WATTS [peak/RMS]: 300/150 SENSITIVITY [dB 1w/1m]: 86.5 BOX SURFACE DEPTH [in, cm]: 8-5/16, 21.1 BOX HEIGHT [in, cm]: 16-1/16, 40.8 BOX WIDTH [in, cm]: 23-15/16, 60.8 ZXM-SERIES STEREO & MULTI-CHANNEL AMPS MODEL [at 14.4V]: POWER [watts/ch], 2 OHM STEREO: POWER [watts/ch], 4 OHM BRIDGED MONO: POWER [watts/ch], CLASS D 2 OHM MONO: REMOTE BASS CAPABLE [sold sep.]: DIMENSIONS [in, cm]: [all models 2-1/8, 5.4H x 9-5/8, 24.4W x ... L] KM-SERIES MARINE COAXIAL SPEAKERS MODEL: KM6000 KM6200 WOOFERS [in, cm]: 6, 16 6, 16 TWEETERS [in, cm]: 1/2, 1.3 3/4, 2.0 TWEETER DOMES: PEN titanium IMPEDANCE [Ohms]: 4 4 POWER [watts peak/RMS]: 150/50 195/65 SENSITIVITY [dB 1w/1m]: 90 90 FREQ. RESPONSE [Hz]: 40-20k 35-21k MOUNTING DEPTH [in, cm]: 2-1/2, 6.4 2-7/8, 7.2 MOUNTING DIAMETER [in, cm]:5-1/8, 13 5-1/8, 13 BOLT-THRU GRILLE COLOR: white charcoal DS693 3-WAY 6x9, 16x23 2, 5 1/2, 1.3 4 140 6-70 92 30-20k 3-1/4, 8.3 5-15/16x8-3/4, 15.1x22.2 yes DS-SERIES COMPONENT SYSTEMS MODEL: WOOFERS [in, cm]: TWEETERS [in, cm]: TWEETER DOME MATERIAL: IMPEDANCE OHMS, RATED [DC resistance]: POWER WATTS [peak/RMS]: SENSITIVITY [dB 1w/1m]: FREQ. RESPONSE [Hz]: WOOFER MOUNTING DEPTH [in, cm]: FLUSH MOUNT TWEETER DEPTH [in, cm]: CROSSOVER POINT [Hz]: CROSSOVER SLOPE [dB/octave]: HIGH FREQ. ATTENUATION LEVEL [dB]: GRILLES: KM-SERIES MARINE SUBWOOFER MODEL: KM10 SIZE [in, cm]: 10, 25 IMPEDANCE [Ohms]: 4 POWER WATTS, peak/RMS: 300/150 SENSITIVITY [dB 1w/1m]: 86.5 FREQ. RESPONSE [Hz]: 30-500 MOUNTING DEPTH [in, cm]: 5-1/4, 13.2 MOUNTING DIAMETER [in, cm]: 9-5/16, 23.5 MIN SEALED BOX VOL [cu. ft, L]: 1.0, 28.3 MAX SEALED BOX VOL [cu. ft, L]: 1.5, 42.5 COMMON TO ALL MODELS FREQUENCY RESPONSE [Hz]: INPUT SENSITIVITY: SIGNAL-TO-NOISE RATIO: ACTIVE CROSSOVER: SUBSONIC FILTER [ZXM.5 only]: KickEQ™ BOOST: DS68 6x8, 16x20 N/A 1/2, 1.3 4 70 6-35 90 45-20k 2-3/8, 6 5x7-3/16, 12.7x18.3 no ZXM450.2 225 x 2 450 N/A yes DS68.2 6x8, 16x20 3/4, 2 titanium 4 [3.4] 90/45 90 40-21k 2-3/8, 6 1-9/16, 4 4k 12 hi/12 lo 0, +3, +6 no DS65.2 6-1/2, 16.5 3/4, 2 titanium 4 [3.3] 120/60 90 35-21k 1-13/16, 4.6 1-9/16, 4 4k 12 hi/12 lo 0, +3, +6 yes DS6.2 6, 16 3/4, 2 titanium 4 [3.3] 120/60 90 35-21k 1-7/8, 4.8 1-9/16, 4 4k 12 hi/12 lo 0, +3, +6 yes KM6500 MARINE MIDRANGE SPEAKERS MODEL: KM6500 WOOFERS [in, cm]: 6-1/2, 16.5 POWER [watts peak/RMS]: 200/100 IMPEDANCE [Ohms, rated]: 4 SENSITIVITY [dB 1w/1m]: 90.5 FREQ. RESPONSE [Hz]: 50-1.7k CROSSOVER [Hz]: 12dB/octave low pass @ 1700Hz MOUNTING DEPTH [in, cm]: 3-7/8, 9.9 MOUNTING DIAMETER [in, cm]: 5-11/16, 14.4 KM6500.2 HLCD MARINE TOWER SYSTEM MODEL: KM6500.2 WOOFERS [in, cm]: 6-1/2, 16.5 TRACTRIX HORN: 60°-vertical x 90°-horizontal COMPRESSION DRIVER [in, cm]: 1.7, 4.3 POWER [watts peak/RMS]: 400/200 SENSITIVITY [dB 1w/1m]: 94.5 FREQ. RESPONSE [Hz]: 50-22k CROSSOVER [Hz]: 18dB/octave high pass @ 1700Hz, 12dB/octave low pass @ 1700Hz MOUNTING DEPTH [in, cm]: 3-7/8, 99 MOUNTING DIAMETER [in, cm]: 5-11/16, 144 HLCD MOUNTING HOLE DIAMETER [in, cm]: 5-11/16, 14.4 HLCD MOUNTING HOLE DEPTH [in, cm]: 7-3/16, 18.3 HIGH-FREQUENCY OUTPUT LEVEL [dB]: 0 or +6 ZXM350.4 90 x 4 175 x 2 N/A no 16-3/4, 42.5 13-1/2, 34.2 ZXM700.5 85 x 4 165 x 2 420 yes 20, 50.7 20-20k [ZXM.5 25-20k], +0/-1dB high level 250mV-10V, low level 125mV-5V >95dB, a-weighted, re: rated power 12dB/octave, variable 50-200Hz selectable high pass, low pass or all pass; [ZXM.5 12dB/octave, full-range channels variable 50-200Hz, selectable high or all pass; 24dB/octave, sub channel variable 50-200Hz, low pass only] - 24dB/octave, sub channel high-pass fixed at 25Hz variable to +18dB, centered @ 40Hz [ZXM.5 boost sub channel only] 41 © 2012 STILLWATER DESIGNS . 11TDMTR . 1-800-256-5425 . The names of actual companies and products mentioned herein may be the trademarks of its respective owners.
Similar documents
kicker`s 1950 studebaker “eagle eye” features px
+The full-coverage, steel basket is shallower than previous Comp baskets, fitting into more applications, and it incorporates 1/4-inch, heavy-duty spade connections. The CompS and CompD provide the...
More information