14 frames - Custom Choppers Slovakia

Transcription

14 frames - Custom Choppers Slovakia
14 FRAMES
FRAMES
14
100% HANDMADE BY
14.02
FRAMES
APPAREL
SEATS &
TOURING
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY &
CLUTCH
DRIVELINE
CFL Frame Kit by West Coast Choppers
Beautiful handmade frames with excellent welds, 38° rake and 2" or 4" downtube stretch. The CFL frame kit comes with side fill cylinder style aluminum oil tank (WCC logo on both sides) , spider web style battery box with chrome bracket, axle kit with WCC logo covers and spider web gusset. The
frame neck front is covered by a brass WCC logo.The CFL frame kit can be used with Evolution style drivetrains and 180-200 series rear tires.
690463 CFL frame with 2" up 2' out
690464 CFL frame with 4" up 2' out
WHEELS, TIRES
& BRAKES
FRAMES
FORKS &
SHOCKS
SHEETMETAL
INSTRUMENTS
& GAUGES
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
www.custom-chrome-europe.com
14.03
LAST MINUTE
650048
Santee 250 Chopper Frames with Single or Dual
Downtubes
FRAMES
Santee 200 Single Downtube Chopper Frames
14
These Santee single downtube frames feature the same quality, strength
and great style, like our popular Santee 250 Chopper frames! Which
gives us yet another opportunity to offer a unique custom frame that
will satisfy your desire to customize. These frames are available in rigid
or swingarm versions without tank mounts that provide you with endless
opportunities to use any of the popular designer tanks we have to offer.
Speaking of designer tanks, a rigid frame with tank mounts made exclusively for our Jesse James ‘Villain’ tank (CC #88120) is also available for
another attractive custom idea!
• Made from 1 3/8"-diameter DOM tubing f or maximum strength
• Accept up to 200-series tires for a brawny appearance
• Include 1" offset kit and axle for 5- or 6-speed transmissions
650048 Rigid frame with 40° rake, 6" downtube stretch, 4" backbone
stretch and no tank mounts
14.04
Santee has built another beautiful frame in the latest style popularized
by designers like Jesse James and Rick Doss. These frames are made
from 13/8"-diameter DOM tubing for strength, and have a 43 degree
neck angle for the raked out look you’re after. Use 6 degree triple trees
to bring the rake and trail back to the happy spot. Santee’s signature
axle plates are more than strong enough to hold up the 250-series tire.
The dual downtube frame looks large and in charge while the single
downtube makes a bold statement. All frames come with 1" offset kit
and axle. Frames have no tank mounts so you can use any of the popular
designer tanks on the market today, and will accept all 5- and 6-speed
transmissions. Most of the swingarm frames come with TÜV approval!
650052 Single downtube swingarm frame with 40° rake, 6" downtube
stretch, 4" backbone stretch and no tank mounts (TÜV approved)
FRAMES
APPAREL
SEATS &
TOURING
686577
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Fred Kodlin ‘Thriller’ 200 Frame Kits
This ‘Thriller’ frame kits are available as rigid or Softail style frames
in two measurement versions. Softail style and rigid frame come with
either 2” up 2”out stretch or with a 4” up 2” out stretch. Both versions
have a 38° rake and come with battery tray (rigid frames only), axle kit
with FK Thriller logo and classic hole style gusset. Really cool base for
all Evo style drivetrains and up to 200 series rear tires. Engine aligiment
require customizing shims
Rigid frames
685823 Fred Kodlin rigid frame, stretched 4“ up 2‘ out 38° rake
F. Kodlin ‘Designer Series’ Frames
All frames are made in Germany and are the basis for the Fred Kodlin
HR Designer Series ‘Ate Up’ (swingarm) and ‘Tobago’ (rigid) bike kits.
Spectacular chopper styling and high manufacturing standards combine to form the foundation for an outstanding bike. All frames have a
40° rake, a 5" downtube stretch and a 3" backbone stretch. The single
downtube diameter measures 45 mm. The swingarm frames come with
rear fender, oil tank, swingarm, rear axle, axle plates, internal fork stop
and swingarm pivot. The rigid frames come with already welded rear
fender, integrated oil tank, rear axle, axle plates and internal fork stop.
686577 Swingarm frame with dual downtubes
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
95402
TRANNY &
CLUTCH
95401
DRIVELINE
WHEELS, TIRES
& BRAKES
95403
FRAMES
‘D&D’ 180 Frame Kits by Santee
Get ‘Down and Dirty’ with these economically-priced frames by Santee.
Chopper-Style
Ride high with these 34° rake frame kits. Add a set of apehangers and
hit the road. The backbones are stretched 2 1/2", and the downtubes are
stretched 3 3/4".
95401
Rigid frame kit
SHEETMETAL
INSTRUMENTS
& GAUGES
‘D&D’ 180 Frame Kits by Santee
Get ‘Down and Dirty’ with these economically-priced frames by Santee.
Stretched-Style
For those who like it a bit tamer, these frames feature a 35° rake and the
backbones are stretched 3" with 0" stretch in the downtubes.
95402
Swingarm frame kit
95403
Rigid frame kit
www.custom-chrome-europe.com
FORKS &
SHOCKS
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
14.05
LAST MINUTE
Swedish Style
Sportster Frames
by Paughco
Got a Sportster engine
you wish you could put in a
cool chopper type frame? These
“Swedish” style rigid frames feature 35
degree rake, 3” stretch out and 6” stretch up.
Set up for final chain or belt drive and disc brakes. Accept Big Twin style
1” neck stems which let you choose from our wide variety of springers,
girders or glide style front ends. No tank mounts so you can use any
of our custom gas tanks. Standard width frames accept 130 series tires
using a conventional rear belt drive. Wide frame accepts 180 series tires
with conventional rear belt drive or 200 series with chain drive. Axles
must be purchased separately. Must use #632247 oil tank with these
frames and either #632249 battery box kit for kickstart applications or
#632250 for electric start applications. Made in USA by Paughco.
632235 Swedish style frame. Standard width. Sportster engines 86-03
632237 Axle for standard width Swedish & Chopper style XL frames
632238 Axle for wide XL frame #632236
Santee Single Downtube Rigid Frame for 86-03
Sportsters
This frame was designed to run a 86-03 Sportster engine and will hold up
to a 130mm rear tire with a belt or chain final drive. Made in the U.S.A.
651236
30° rake, 0” Backbone, 0” downtube stretch single downtube rigid
frame without tank mounts for 86-03 XL engines
Oil Tanks for XL Rigid
Frames by Paughco
FRAMES
This oil tank is for use with rigid
Sportster frames manufactured by
Paughco. Drain plug sold separately.
Made in USA by Paughco.
632247 Oil tank for use w/Paughco XL
rigid frames
632248 Oil tank drain plug
Santee Rigid Frame for 04-12 Rubber Mounted
Sportsters
This frame was designed to run a 04-12 rubber mounted Sportster engine
and will hold up to a 150mm rear tire with a belt or chain final drive.
Made in the U.S.A.
651237 30° rake, 0” Backbone, 0” downtube stretch rigid frame without
tank mounts for 04-13 rubber mounted XL engines
14
Chopper Style Sportster Rigid Frames by Paughco
Designed to let you put any Sportster engine from 57-03 in a cool
lookin’ chopper style frame! These “Chopper” style rigid frames feature
40 degree rake and 1 1/2” to 2 1/4” down tube stretch depending on
model. Set up for final chain or belt drive and disc brakes. Accept Big
Twin style 1” neck stems which let you choose from our wide variety
of springers, girders or glide style front ends. No tank mounts so you
can use any of our custom gas tanks. Frames accept up to a 130 series
tire using chain drive or a conventional rear belt drive. Axle must be
purchased separately. Must use #632247 oil tank with these frames and
either #632249 battery box kit for kickstart applications or #632250 for
electric start applications. Made in USA by Paughco.
632239 Chopper style rigid frame, 1 1/2" down. XL's 57-76
632240 Chopper style rigid frame, 2 1/4" down. XL's 77-85
632237 Axle for standard width Swedish & Chopper style XL frames
14.06
SCS Drag Style Frames for Evolution Engines
To get your bike noticed in a crowd, you should use this extraordinary
German-made frame as the basis. Made for use with 250-series rear tires,
the frame comes with rear axle, drag-style swingarm, swingarm pivot
bolts, battery tray and aluminum drag style oil tank. Available with
three different rakes and weld on tab for steering column lock. They
accept all Evolution engines, or when a CC #36995 engine adapter plate
is used, they will also accept Twin Cam 88 engines.
686701 32° rake frame
FRAMES
APPAREL
SCS Big Tube Frames with TÜV Approval
The new fat one..... fat tubing and an extra ordinary frame look. Top
quality production by SCS and first class stability with more ground
clearance are only a few points to mention. Tanks can be mounted
in the same height than the backbone while the backbone part can
be seen from above as a nice detail of the bike. Several options like
rake, stretchings (see options table) are possible. One highlight at the
options table is the ability to choose between a low seater drag style
frame and the standard version as rigid or Softail style.
697016 Big Tube frame, Softail style for Big Twin models
697017 Big Tube frame, rigid style for Big Twin models
652761 Oiltank
SEATS &
TOURING
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
SCS Big Tube Frame For Sportster Models with TÜV
Approval
Fat tubing, better ground clearance, a superb stability and the curved
backbone section to mount custom split tanks at the left and right side
are the highlights of these frames for Sportster drivetrains. The backbone can stay visible between the tank. Many options are possible,
please see the chart for all possibilities. Frame only. Available as Softail
style or rigid version.
697018 Big Tube frame, Softail style for XL models
697019 Big Tube frame, rigid style for XL models
652761 Oiltank
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY &
CLUTCH
DRIVELINE
SCS BIG TUBE Frame Menu, Choose Your Style!
Rake
32°
36°
40°
45°
50°
697016
EVO / TCA
Standard
TCB
Drag Style
Softail
Backbone
Narrow (OEM)
Wide (Custom)
Rear tire size
Straight
697017
Curved Out
EVO / TCA
Standard
200
300
TCB
Drag Style
250
330
Rigid
Stretch Backbone
0“
+2“
+4“
+6“
280
Double
697018
86-03
Single
XL Softail
04-10
697019
86-03
Standard
200
300
04-10
200/250 ONLY
Drag Style
250
330
280
360
Standard
Drag Style
FRAMES
360
Rear tire size
Downtubes
WHEELS, TIRES
& BRAKES
Narrow (-200)
FORKS &
SHOCKS
Wide (-250)
SHEETMETAL
Stretch Downtubes
-2“
0“
+2“
+4“
+6“
XL Rigid
Width mm/axle ø
Swing Arm: Softail Style
697019
290 / 3/4“
345 / 1“
Drag Style
310 / 3/4“
375 / 1“
Oiltank
320 / 3/4“
www.custom-chrome-europe.com
Choose the swingarm width
for Big Twins ONLY!
Sportster frames come including swingarm. Ask your sales
rep. for further details.
INSTRUMENTS
& GAUGES
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
14.07
LAST MINUTE
170377
95039
FRAMES
Santee Low Glide Frames and Swingarms
14
Chica Style Gooseneck Swingarm Frames by Santee
Frames accept any Big Twin engine (except Twin Cam 88 engines) and
the wider-than-stock swingarms permit the use of up to 200-series
tires with a 1 1/2"-wide rear belt. The 38 degree Gooseneck gives these
frames a vintage chopper look.
• Smooth rear axle adjuster blocks
• Accept most Original Equipment or aftermarket accessories, and late
87-99 rear brake calipers and master cylinders
• Take early-style coil brackets (48-early 82)
• Require custom fender struts and 81/2"-wide rear fenders (not included)
• Constructed from 1 1/8"-diameter 1020 alloy steel tubing and use
early bearing cups and bearings
• 4-speed or 5-speed transmissions may be installed with the appropriate mounting plate
• Include rear axle and swingarm pivot shaft with bearings
170379 38° rake frame with no tank mounts for up to 180-series tire
170377 38° rake frame with no tank mounts for up to 180-series tire
If you’re after a stock look that’s as easy to build as bolting on parts,
choose our Low Glide frame. If you’re after a more radical custom look
with one of those really-wide rear tires, pick one of our Low Glide
Custom frames.
Low Glide Stock Replacement Frame
Stock-style frame kit accepts most Original Equipment or aftermarket
accessories, with brackets and tabs for the coil, belt guard, late 87-99
rear brake caliper and master cylinder, ‘flatside’ gas tanks, oil tank, shock
absorbers and 86-99 fender struts. There is also a mounting loop provided on the right front downtube for 87-91 oil filter housings. Everything
bolts in place like on stock frames. Frames have 1"-diameter 1020 mild
steel tubing with a stock 32° rake, no stretch, and the swingarm is stock
width with clearance for belt or chain drive. The steering head uses stock
bearings and cups. With correct inner and outer primaries and transmission mounting plate, 4-speed, 5-speed or 6-speed transmissions can be
installed. Include rear axle and swingarm pivot shaft with bearings.
95039
Frame and swingarm kit
95037
Replacement frame ONLY (no swingarm)
95044
Swingarm pivot bearing and retaining clip for all Softail models
from 84-99 (repl. OEM 9076)
17289
1/4"-offset driveline offset kit (permits the use of a 1/2"-wider
rear tire)
Accessories for Low Glide Frames
Here are some items to finish a hot custom bike.
Bearings and Cups
12263
Chrome bearing cups (pair)
12264
Timken bearing (sold each)
‘Flatside’ Gas Tanks
15298
5 gallon
15294
6 gallon
25550
Gas tank mounting kit
14.08
FRAMES
APPAREL
SEATS &
TOURING
FOOT
CONTROLS
HAND
CONTROLS
650192
LIGHTING
ELECTRICAL
Dyna Wide Drive Swingarm Kits By Rick’s for 260
Series Wheels with TÜV
Precision manufacturing wide drive swingarm kits made in Germany by
Rick‘s. Nice looking tube design for 1” or 25 mm axles. A Rick’s wide drive
kit is in all kits included which makes the rear wheel able to run perfect
aligned in the middle. Also included is a Gates rear belt with 131 teeth
for 66 teeth pulleys. With this kit you do not need to change any internals of your transmission. Kits come with raw swingarm.
619419 Dyna models 06-11 with 1“ axle incl. offset kit
619420 Dyna models 06-11 with 25 mm axle incl. offset kit
619421 Dyna models 12-14 with 25 mm axle incl. offset kit
650198
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY &
CLUTCH
DRIVELINE
WHEELS, TIRES
& BRAKES
Santee 4-Speed Rigid Frames
These Classic Santee frames are the perfect start to any ‘Old School’
build. Available with the classic look of either Wishbone or Straight Leg
style downtubes that Santee is known for. Frames accept any Big Twin
engine except Twin Cam (including Strokers and Evolution motors).
Frames are set-up for disc brakes and include rear axle kit.
Straight Leg Frames
650192 30º rake, 0" downtube stretch, 0" backbone stretch with ‘Flatside’
tank mounts
FRAMES
FORKS &
SHOCKS
Wishbone Frames
650198 30º rake, 0" downtube stretch, 0" backbone stretch with ‘Flatside’
tank mounts
SHEETMETAL
Replacement Axle Kit
650241 Replacement axle for Santee 4-speed rigid frames
INSTRUMENTS
& GAUGES
Optional Oil Tanks
650224 Custom 3.5 qt. oil tank with push-on hose barbs
650225 Custom 3.5 qt. oil tank with push-on hose barbs and spin-on filter
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
www.custom-chrome-europe.com
14.09
LAST MINUTE
Rick’s Trick ‘n’ Roll 300 Fat Ass Kit with TÜV Approval
FRAMES
(T)Rick’n’Roll now means 300 series tyres in your stock Softail frame! Gone are the times of offset transmissions, offset primaries, right side drives,
frame alterations and difficult welding jobs. The swingarm of this new kit for TwinCam Softail models fits your stock factory HD frame, with the 300
wheel perfectly centered. Power transmission is achieved through an intermediate drive shaft which is positioned exactly in the pivoting center of the
swingarm. As a result engine and transmission stay absolutely untouched, which minimizes stress on the drive train and suspension forces on the rear
belt. Since the primary housing also remains in its original position, footpegs need not to be re-positioned and ground/cornering clearance is not affected. Further advantages are that the motorcycle stays well balanced and that installation is quick and hassle-free. As with all Rick’s Motorcycles Kits
the components are developed, tested and TUV-approved (with shown wheel designs only). The selection includes kits for OEM/custom brakes right
or Drive Side Brakes (= DSB) left with your choice of kits for center mount or side mount license plate. A matching rear fender made from fibre glass
compound is also available. Each kit comes complete with swingarm, intermediate shaft, two 1” wide Gates carbon fibre belts, all necessary small parts
and detailed instructions. A single manufacturer product! Made in Germany and patent-protected. Because of the high amount of variations this is not
a stock item. Please contact our sales team for a special order form which includes all possibilities and fitment information.
14
Trick ‘n’ Roll Swingarm Kits
619498 TnR Kit, for Twin Cam 88 cui 00-07
619499 TnR Kit, for Twin Cam 88 cui 00-07 with bracket for drive side brake system
619500 TnR Kit, for Twin Cam 88 cui 00-07 with brackets for drive side brake system and
threads for side mount plate
619501 TnR Kit, for Twin Cam 88 cui 00-07 with threads for side mount plate
619502 TnR Kit, for Twin Cam 96 cui
619503 TnR Kit, for Twin Cam 96 cui, with bracket for drive side brake system
619504 TnR Kit, for Twin Cam 96 cui, with brackets for drive side brake system and threads
for side mount plate
619505 TnR Kit, for Twin Cam 96 cui, with threads for side mount plate
619506 TnR Kit, for Twin Cam 08-10
619507 TnR Kit, for Twin Cam 08-10, with bracket for drive side brake system
619508 TnR Kit, for Twin Cam 08-10, with drive side brake system/side mount plate
619509 TnR Kit, for Twin Cam 08-10, with threads for side mount plate
619510 TnR Kit, for Twin Cam 11-14
619511 TnR Kit, for Twin Cam 11-14, with bracket for drive side brake system
619512 TnR Kit, for Twin Cam 11-14, with brackets for drive side brake system and threads
for side mount plate
619513 TnR Kit, for Twin Cam 11-14, with bracket for side mount plate
Optional
619514
619515
619516
619517
619518
619630
619631
619632
619633
parts
TnR Rear fender kit Rick‘s 300 GFK ShortCut RACE TC88
TnR Rear fender kit Rick‘s 300er GFK ShortCut RACE TC96
TnR Rear fender kit Rick‘s 300er GFK TC88
TnR Rear fender kit Rick‘s 300er GFK TC96
TnR License plate bracket
TnR drive side brake system (caliper and mounting hardware)
TnR drive side brake rotor
TnR drive side brake pulley 66 teeth 25,4 mm
TnR drive side brake pulley 70 teeth 20 mm
Note: Wheel, brake rotor and pulley are not included in the package and must be ordered separately!
14.10
Supersteve
Lector
Rodder
FRAMES
APPAREL
86760
SEATS &
TOURING
FOOT
CONTROLS
HAND
CONTROLS
‘Standard’ Swingarm
Wide Drive Swingarms with TÜV
for Softail Models by SCS
86759
‘Fisheye’ Swingarm
Wide Drive
Swingarm by Fred
Kodlin with TÜV
for Softail Models
These swingarms fit all Softail models from
87-06 including Twin Cam 88 models and
allows rear tire conversion up to a 250-series
on 9"-wide rims in conjunction with the original rear belt. Rear axle is not included and
must be purchased separately.
86675
Raw swingarm for Twin Cam 88 Softail
models, 00-06
86674
Raw swingarm for Evolution Softail
models
86999
16"-wide rear axle (405 mm)
86959
16 1/2"-wide rear axle (415 mm)
686610 17"-wide rear axle (435 mm)
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
250 ‘Standard’ or ‘Fish
Eye’ Swingarm
696746 ‘OEM Style’ 250 swingarm fits Evo
models, black
696747 ‘Fish Eye’ 250 swingarm fits Evo
models, black
696748 ‘OEM Style’ 250 swingarm fits TC
models, black, 00-06
696749 ‘Fish Eye’ 250 swingarm fits TC models,
black, 00-06
GASKETS
TRANNY &
CLUTCH
86112
DRIVELINE
WHEELS, TIRES
& BRAKES
Wide Drive Kit with TÜV for
all Softail Models with SCS
Swingarm
Dyna 240 Swingarm
Kit by Fred Kodlin
Solid wide end swingarm
kit, designed for all HD Dyna
models, fits „Street Bob“, „Fat
Bob“ and other Dynas. Allows the use of 240
rear tires without offset-kit (only modification
necessary: Shortening of the right OEM brake
caliper bracket by 10 mm, 133 tooth Belt with
20 mm width required). Advanced chromed
3D design belt tensioners at the end of the
swingarm. The paintwork is protected by metal
inserts, thus offering perfect function and long
lasting clean look. Comes raw finish.1“ axle.
683456 For Dyna models 00-06
683457 For Dyna models 06-13
This kit moves the primary and the rear belt
position 13/16" (20 mm) outward to permit
clearance for larger tires while leaving the
engine in it’s original position. It permits rear
tire conversion up to 250-series on 9"-wide rims
in conjunction with the original rear belt.
86759
Fits all Softail models from 91-99,
includes SCS swingarm, rear axle, offset transmission plate, sprocket shaft
extension, sprocket nut and primary
spacer
86760
Fits all Softail models from 00-06,
includes precision gear shaft, rear axle,
longer clutch pushrod, special starter
bushing, offset sprocket, sprocket shaft
extension, SCS swingarm and hardware
kit
www.custom-chrome-europe.com
FRAMES
86111
Custom Chrome Swingarm Kits
with TÜV for Sportster Models
Complete swingarm conversion kits for all
Sportster models from 87-03. Each kit comes
with raw swingarm, offset sprocket, stainless steel axle and spacers, aluminum chain
adjusters and shock studs. Because of the
wider swingarm, the following rim-tire combos are possible: 5.5" x 17" rim with Metzeler
180/55x17", 5.5" x 15" rim with Bridgestone
170/80x15" and 6.0" x 16" rim with Avon
AM23 200/60x16". All swingarm kits come
with TÜV-approval. Swingarm covers are not
included.
86112
Wide stock-style swingarm kit
86111
Wide drag-style swingarm kit
14.11
FORKS &
SHOCKS
SHEETMETAL
INSTRUMENTS
& GAUGES
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
LAST MINUTE
1/4" Offset Driveline Kit
Bolt-On Hardtail for Sportster
Models
Weld-On Hardtail for Big Twins
In addition to a chrome primary spacer this kit
includes a chrome transmission plate, bolts,
O-rings, sprocket shaft spacer and rear pulley
spacer. Permits the use of 1/2" wider tires in a
stock chassis.
17289
Fits Softail models from 86-99
A bolt-on unit lengthens the wheelbase by 4
1/2" and lowers the bike 4". The oil tank to use
with this frame is a CC #12599
08892
For Sportster models with mechanical
rear brakes 57-78
A quick and easy method of converting swingarm frames to rigid. It has the same wheelbase
and ride height as stock.
08893
Fits hydraulic drum brake 4-speed
swingarm frames 58-72
Offset Transmission Plates
HKC Axle Screw
681866
FRAMES
681867
HKC retro style rear axle adjuster
screws for rigid frames 3/8 UNF
HKC retro style rear axle adjuster
screws for Softail style frames 3/8 UNC
These 1-inch offset mounting plates for
5-speed Softail transmissions, make assembly
of Wide Drive swingarm or extra wide rigidframed customs a snap. The hot set-up for
building that extra-wide ride.
17285
Chrome mounting plate
17286
Raw steel mounting plate
14
86615
Weld-On Hardtail for Sportster
Models
Fits early Sportster models with mechanical
rear brakes. It forms an almost-perfect straight
line with the frame backbone, and lengthens
the motorcycle by 4" and lowers it 4". The oil
tank to use with this frame is a CC #12599.
08889
Fits Sportster models 57-78
14.12
Offset Kits for Twin Cam 88
Softail Models
These kits move the primary and the rear belt
position 20mm or 25mm outward to provide
clearance for larger tires, while leaving the
engine in its original position. Includes precision mainshaft, clutch pushrod, special starter
bushing, primary spacer and hardware kit. Fit
all Softail models from 00-06.
86615
20 mm offset kit (shown)
686216 25 mm offset kit (uses the Original
Equipment pulley, but includes a longer mainshaft 5th gear)
Rear Wheel Pulley Spacers
Billet aluminum spacers permit custom alignment of rear wheel pulleys. Can be used with
many wide rear tire kits and frames. Will not
fit 00-Up wheel assemblies with sealed bearing
style hubs.
Natural Aluminum Finish
42691
.250"-thick
42692
.375"-thick
42693
.500"-thick
42694
.750"-thick
42695
.937"-thick
42696
1.100"-thick
42697
1.250"-thick
FRAMES
APPAREL
SEATS &
TOURING
FOOT
CONTROLS
HAND
CONTROLS
688207
688208
688206
Compensating Sprocket Assemblies
Replace your worn out Original Equipment unit with one of these complete assemblies.
Complete Assemblies
Each of these assemblies includes the shaft extension, cover with springs,
sliding cam, engine nut and sprocket.
688209 34-tooth for Dynas 06-11, Touring models 07-10, Softails from
07-11 except Rocker (OEM 40296-06)
14241
25-tooth for all Big Twin models from 94-06 (except 06 Dyna)
14235
24-tooth for Softail models from 91-93
14236
Same as CC #14235 with 1" offset
14238
24-tooth for Softail models from 85-90
14231
24-tooth for 5-speed rubber-mount models from 85-90
Cover Assemblies with Springs
Available for most models from 85-05
14233
Fits 5-speed rubber-mount models from 85-90 (repl. OEM 4026785)
14240
Fits Softail models from 85-90 (repl. OEM 40384-83A)
14237
Fits all Big Twins from 91-05 (repl. OEM 40384-91)
12222
17284
14241
LIGHTING
For Softail models from 91-11 and 5-speed rubber-mount Big Twin
models from 85-90 (repl. OEM 40266-85).
688208 Stock length for Dynas 06-11 and Touring models from 07-10,
Softails from 07-11 except Rocker (repl. OEM 40297-06)
14232
Stock length for Softail models from 91-06 and 5-speed rubbermount Big Twin models from 85-90 (repl. OEM 40266-85)
14244
1/2" extended for Big Twin models from 85-90 (repl. OEM 4026685)
080076 .500" extended for Softail models from 91-06 and FXR and Touring
models from 85-06
14243
1" extended for Big Twin models from 85-90 (repl. OEM 40266-85)
14772
1 1/2" extended (for Big Twin models from 85-90)
14196
45 mm (1 3/4") extended (for Big Twin models from 85-90)
EXHAUST
INTAKE
ENGINE
Compensating Sprocket Components
Restore your compensating sprocket to peak performance. Fits most Big
Twins with primary chains from 70-05.
Sliding Cams for Big Twins
12222
Fits most models from 70-83 (repl. OEM 40299-70)
12764
Fits all models from 85-05 (repl. OEM 40299-83A)
688207 Fits Dynas 06-11, Touring models from 07-10, Softails 07-11 except
Rocker (repl. OEM 40333-06)
Sprocket Nut for Big Twins from 70-90
12112
Stock length (repl. OEM 40392-70)
14246
1/2" extended (repl. OEM 40392-70)
14245
1" extended (repl. OEM 40392-70)
Sprocket Nut for Big Twins from 91-05
12078
Stock length (repl. OEM 40392-91)
14248
1/2" extended (repl. OEM 40392-91)
14247
1" extended (repl. OEM 40392-91)
14771
1 1/2" extended (repl. OEM 40392-91)
14198
1 3/4" extended
Compensating Sprockets for Big Twins from Late 70-86
12218
22-tooth (repl. OEM 40280-70)
12232
23-tooth (repl. OEM 40282-70)
12233
24-tooth (repl. OEM 40275-70))
Compensating Sprockets for Big Twins from 85-11
14234
24-tooth for Softail models 91-93 and 5-speed rubber-mount
models from 85-90 (repl. OEM 40269-85A)
14242
25-tooth for all Big Twin models from 94-05 (repl. OEM 40308-94)
688206 34-tooth for all Dynas 06-11 and Touring models from 07-10,
Softails 07-11 except Rocker (repl. OEM 40320-06)
Sprocket Shaft Extensions
For 4-speed Big Twins from late 70-83, 5-speed Big Twins from 80-E84
and Softail models from 84-90 (repl. OEM 40375-70).
20306
Stock length for 4-speed Big Twins from late 70-83, 5-speed Big
Twins from 80-E84 and Softail models from 84-90 (repl. OEM
40375-70)
080075 .500" extended for Softail models from 85-90
ELECTRICAL
GASKETS
TRANNY &
CLUTCH
DRIVELINE
Offset Parts
17284
Chrome 1" engine offset ring to inner primary
95148
Natural aluminum 1" engine offset ring to inner primary
17529
Chrome 1 1/2" engine offset ring to inner primary
17270
Natural aluminum 1 1/2" engine offset ring to inner primary
14243
1" extended for Big Twin models from 85-90 (repl. OEM 40266-85)
86966
Complete 25 mm offset kit for Big Twins 92-99
86968
Complete 40 mm offset kit for Big Twins 92-99
www.custom-chrome-europe.com
WHEELS, TIRES
& BRAKES
FRAMES
FORKS &
SHOCKS
SHEETMETAL
INSTRUMENTS
& GAUGES
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
14.13
LAST MINUTE
75497
75498
95044
Primo Offset Front Pulley Inserts
To permit custom motorcycle builders the freedom to offset the transmission by allowing the use of wider rear wheel/tire assemblies, the following offset inserts are available for Primo front pulleys. Special nuts
and flanges (outside guide) are required. The 2.5" inserts fit Brute III
front pulleys, the 3.5" inserts fit Brute IV pulleys.
Inserts
Offset
0.50"
1.00"
1.25"
1.50"
2.00"
86144
86155
2.5" dia.
86145
86146
86147
86148
n/a
3.5" dia.
86150
86151
86152
86153
86154
Motor Nut
86156
86157
86158
86159
86160
Outside guide for offset pulleys
Special motor nut washer
FRAMES
SCS Sprocket Shaft
Extensions
14
Precision made sprocket
shaft extensions for Big Twin
models. Available in different
length for several rear tire
conversions and offset kits.
For 91-06 models
682457 Sprocket shaft extension 1/2“
682458 Sprocket shaft extension 1/4“
682459 Sprocket shaft extension 10 mm
682461 Sprocket shaft extension 20 mm
682462 Sprocket shaft extension 25 mm
682463 Sprocket shaft extension 3/4“
682464 Sprocket shaft extension 30 mm
682465 Sprocket shaft extension 40 mm
Swingarm Pivot Components
Manufactured from high-quality materials for all factory and aftermarket swingarms. Sold each.
For Softail Models from 86-99
95044
Swingarm pivot bearing and retaining clip for all Softail models
from 84-99 (repl. OEM 9076)
For Dyna Glide Models
38022
Bushing kit for all models from 91-06
38023
Left spacer ONLY (repl. OEMs 47495-90, 47496-90)
38027
Bearing ONLY (repl. OEM 47082-81) also fits Sportster models from
82-03
For 5-Speed Rubber-Mount Models (except Dyna Glide Models)
75497
Rubber isolator ONLY for models from 86-08 (repl. OEM 47564-86)
75498
Rubber isolator ONLY for models from 82-85 (repl. OEMs 4755379A, 47564-82)
38027
Bearing ONLY (repl. OEM 47082-81)
Swingarm Bumpers
For stock replacement or custom applications.
Replaces OEM 11451, and fit all Softail models from
85-99.
Original Equipment Bumpers
These are Original Equipment parts.
75190
Pack of 10
Aftermarket Bumpers
695002 Sold each
For 70-90 models
682466 Sprocket shaft extension 1/2“
Ride-Str8 Rear Axle
Adjusters For FLHT
Models With 3/4”
Diameter Rear Axles
FXSTD Deuce 180mm Fat Tire Kit by Vulcan
Engineering
This simple kit allows you to run a 180mm tire on your 00-07 Deuce with
no modifications to the frame or wheel. Kit includes a pulley spacer and
alignment spindle. Easy install that can be done at your next rear tire
change!
668253 180 mm tire conversion for 00-07 FXSTD Deuce models
14.14
Ride Safe, Ride-Str8. The Rear Axle
Spacers and the Axle Adjuster Block
Spacers, are designed to improve
your HD- FLH /FLT motorcycle ride
performance and to prevent damage to the swingarm tube wall by
increasing the surface of contact
and improving load distribution
(Patent Pending). Stress Loads generated by different riding conditions may adversely affect the swingarm rear axle assembly by causing
indentation of the OEM components into the thin walls of the swingarm
tube. These indentations prevent proper adjustments to the Drive Belt
and Wheel Alignment adjustments. Furthermore these indentations
can amount to swingarm failure. When you up-grade your bike with
Ride-Str8 components, ride performance shall dramatically improve by
the increased load to surface of contact ratio, which prevents swingarm
damage and swingarm deflection. Swingarm deflection contributes to
poor riding performance or wobble.
696208 Axle adjuster/spacer kit for FLHT models from 94-97
FRAMES
APPAREL
SEATS &
TOURING
Swingarm Stiffener Kit by Rivera
The Stiffey helps to solve the decades long problem of instability in
80-08 rubber mount FL models. It installs super easy and will make your
ride safer by helping control rear steering. Made in the USA.
667557 Stiffener kit
FOOT
CONTROLS
Weld-On Vibrator Bar Kit
This east to install kit will allow you to add the OEM style lower frame
loops and vibrator bar back onto your stock frame or add one to a custom frame. Kit comes complete with a chrome-plated 5-pc bar assembly
and 2 raw steel collars to weld onto the frame. Made in the U.S.A.
651238 7-pc weld on vibrator bar kit
HAND
CONTROLS
LIGHTING
ELECTRICAL
SCS Rear Axles for
Custom Applications
Rear axle kits by SCS in different lengths matching nearly all
demands of custom bike builders. Two nuts for each axle are
included. Available with 3/4” or 1”
diameter.
682431 3/4“ x 350 mm
682432 3/4“ x 370 mm
682433
682434
682435
682436
682437
682439
3/4“ x 390 mm
1“ x 445 mm
1“ x 465 mm
1“ x 475 mm
1“ x 485 mm
1“ x 530 mm
EXHAUST
INTAKE
Paughco FXR/FLT Swingarm Upgrade Kit
Specifically designed to upgrade the quality and feel of the driveline on
your FXR or Touring model bike. These 7-pcs convert the old style OEM
parts to a high-tech spherical bearings with CNC-Machined precision
spacers and collars. Made in the U.S.A.
651435 7-pc swingarm upgrade kit for 80-01 FXR & Touring models
ENGINE
GASKETS
TRANNY &
CLUTCH
Flush Mounted Pivot Shaft for Late Softail Models
by Adjure
654145
654146
DRIVELINE
The design team at Adjure has come up with this new flush mounted
stainless steel pivot shaft to give your bike a custom look without having to modify or machine your frame. Fits all Softail models from 00-07.
600095 Complete kit
WHEELS, TIRES
& BRAKES
654147
654148
FRAMES
84378
652569
Chrome Swingarm Pivot Bolts for Softail Models
Chrome hex head swingarm pivot bolts. Grade 8 bolts measure 3/4"-16
x 3"-long. Sold in pairs.
84378
Fit Softail models from 84-99
652569 Swingarm axle Softail models 84-99
Swingarm Pivot Bolt Spacers for
Softail Models
Fit Softail models from 87-99.
84602
Pack of 10
Billet Stabilizer Link by Arlen Ness
• The first custom engine stabilizer for 09-13 touring models, replaces
stock link
• Features specially designed spherical bearings machined with a counter bore for clean flush mounted hardware
• Constructed from billet aluminum
• Available in chrome or black anodize finish
• Chrome hardware included
654145 Deep Cut stabilizer link 09-Up FLT chrome
654146 Deep Cut stabilizer link 09-Up FLT black
654147 Hole Shot stabilizer link 09-Up FLT chrome
654148 Hole Shot stabilizer link 09-Up FLT black
654149 Smoothie stabilizer link 09-14 FLT chrome
654150 Smoothie stabilizer link 09-14 FLT black
www.custom-chrome-europe.com
FORKS &
SHOCKS
SHEETMETAL
INSTRUMENTS
& GAUGES
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
14.15
LAST MINUTE
680028
Weld-On Frame Tab
680037
Weld-on right hand side frame mounting
tab for all late model 4-speed Big Twins
without the Original Equipment mounting tab.
17503
Sold each
668100
668101
The ‘Touring Link’ by Progressive
Suspension
Finally an inexpensive and easy to install
solution to the handling challenges faced
by most Touring models. The brace does not
hang below the frame so it will not cut into
your ground clearance. Helps keep motor
and swingarm assembly aligned with chassis
without introducing unnecessary vibration to
the rider.
680037 Fits 93-08 Touring models
680028 Fits 09-13 Touring models
FRAMES
RevTech Chassis Stabilizer
14
Looking for a way to stop the wobbling,
weaving, and rear steering on your Touring
model? The RevTech Chassis Stabilizer utilizes
a swingarm pivot anchor to cure these problems. So you can feel confident leaning your
Bagger into the corners with a RevTech Chassis
Stabilizer under your Bagger. Fits FLH/FLT models 93-08.
668100 Satin Finish
668101 Black Anodized Finish
Motor Mount Adaptor for Twin
Cam Engines
Permits the installation of a Twin Cam engine
into earlier style frames. It’s machined from
billet aluminum and installs to the rear
engine mount. Includes instructions and
mounting hardware.
36995
Complete kit
Note: Does not work with counterbalanced Twin Cam
engines ("B" engines)
26397
270144
Oil Tank Mounting Kits
Stainless Steel Splash Guard by
Pro-One
The perfect replacement for the stock plastic part
for a custom look.
65429
Fits 5-speed Softail models from 86-99
14.16
For Softail Models
Includes chrome front and rear brackets to
mount oil tanks to most aftermarket and
Original Equipment Softail frames.
26397
Complete kit
270144 Rear bracket only, chrome (replaces
OEM 62704-84)
270147 Front bracket only, chrome (replaces
OEM 62707-84)
Motor to EVO Frame Adapter
Plate for Twin Cam Models 06-14
Adapts all Softail and Rigid EVO frames to Twin
Cam 96” ‘A’ motors 06-. The motor adapter
plate includes all hardware, oil line fittings and
o-rings. Needs the transmission offset plate
listed below!
656077 Motor to frame adapter plate
TC96/103 engine fits Evo style frames
656079 Offset transmission plate for any 5 or
6 speed Softail transmission when CCI#
656077 T/C adaptor plate is used.
FRAMES
APPAREL
Frame Sliders
back - left
SEATS &
TOURING
Silver
687652
Black
FOOT
CONTROLS
Pad Insert
Mounting
Kit
HAND
CONTROLS
Mounting Kit
Frame Sliders
front - right
LIGHTING
Chrome
ELECTRICAL
LSL Aluminum Frame Sliders for Buell XB9/XB12 Models
These kits are made of CNC-machined aluminum and are available your choice
of 5 different colors/finishes for the pads. They fit Buell XB9/XB12 models
to protect important parts in case of a crash. The inner ring is replaceable.
Mounting kit and pads are sold separately.
Mounting Kit
687650 Fits all XB9/XB12 models
EXHAUST
Pads
687652
687653
687655
INTAKE
Titan
Black
Carbon
ENGINE
GASKETS
TRANNY &
CLUTCH
DRIVELINE
WHEELS, TIRES
& BRAKES
FRAMES
FORKS &
SHOCKS
Santee Designer Series ‘Bonanza’ Highway Bar by Fred Kodlin
This is the latest from Fred Kodlin and the Murder Cycles crew. These highway bars are the perfect match to the ‘Bonanza’ handlebar series. The
Highway Bars feature 1 1/4” steel tubing with built-in peg mounts so there is no need for those bulky clamps. They are available in a chrome-plated or
black powdercoated finish.
Chrome
697174 ‘Bonanza’ highway bar for 09-Up Touring models (except FLTR Road Glide models), chrome
697168 ‘Bonanza’ highway bar for 97-08 Touring models (except FLTR Road Glide models), chrome
Black
697175
697169
SHEETMETAL
INSTRUMENTS
& GAUGES
LUBRICANTS &
CHEMICALS
‘Bonanza’ highway bar for 09-Up Touring models (except FLTR Road Glide models), black
‘Bonanza’ highway bar for 97-08 Touring models (except FLTR Road Glide models), black
Optional Footpeg Clevises (required if you want to run highway pegs)
652025 Chrome 3/8”-20 clevis, sold in pairs
652026 Black 3/8”-20 clevis, sold in pairs
TOOLS &
EQUIPMENT
Note: Not for use with factory lowered (FLHX, FLHRS) and aftermarket lowered bikes.
www.custom-chrome-europe.com
14.17
LAST MINUTE
PUSH THE BUTTON
PEGS POP OUT
SPRING LOADED POP-OUT PEGS!
Peg Expanded
View
Phantom Highway Bars with Pop-Out Pegs by JBN Custom
• Chrome-plated 1 1/4” tubing
• Combination engine guard and highway peg is engineered with the rider’s comfort in mind
• Spring loaded pegs pop out with the push of a button
• Easy installation with included hardware
610600 Fits all Touring models from 97-08 (except FLTR)
610601 Fits all FL Softail models from 86-99
610602 Fits all FL Softail models from 00-13
Note: Always check to make sure there is adequate ground clearance on motorcycles that have been lowered.
FRAMES
610370
14
New Highway Bars for XL and FXD Models
Highway Bar with Footrest
This highway bar & footrest combination was designed with the riders
comfort in mind. They are constructed of 1.25” steel tubing and chromeplated with the addition of a heavy-duty rubber foot pad. They are
perfect for those long rides when you want to stretch your legs while on
the road.
610370 Fits 09-Up Touring models (except FLTR)
610369 Fits 97-08 Touring models (except Road Glide)
610368 Fits 00-Up FLST Softail models
610367 Fits 86-99 FLST Softail models
14.18
Highly polished and chromed or flat black highway bars with 38 mm
outer diameter. Mounting hardware is included. Fits all Dyna models
06-08 and Street Bob models (except FXDWG Dyna Wide Glide and FXDF
Dyna Fat Bob models)
682660 Highway bar for XL models 04-13, 30 mm, chrome, not for
XL883C/ 1200C (=forward control) models!
682661 Highway bar for XL(XL883C/ 1200C too) models 04-13, 38 mm,
chrome
682662 Highway bar for XL models 04-13, 30 mm, black, not for XL883C/
1200C (=forward control) models!
682663 Highway bar for XL/XLC models 04-13, 38 mm, black
682664 Highway bar for FXD models 06-13, chrome, do not fit FXDWG,
FXDF & FLD (forward control)
682665 Highway bar for FXD models 06-13, black, do not fit FXDWG,
FXDF & FLD (forward control)
FRAMES
APPAREL
Chrome Highway Bars
American-made reproductions of Original Equipment bars have flawless chrome-plating and are made from high-strength tubing with
heavy-duty 1/4" steel plate mounts welded to the tubing to insure a
perfect fit.
Front 1 1/4"-Diameter Highway Bars
609620 Fits FL Softail models from 00-Up
28933
Fits FL Softail models from 86-99 (repl. OEM 49004-90)
609621 Fits FX Softail models from 00-Up
28932
Fits FX Softail models from 84-99 and 4-speed FX models from
72-86 (repl. OEM 49016-72D)
609632 Fits FXDWG& FXDF models from 06-11, chrome
609622 Fits Dyna Wide Glide models from 93-05
609623 Fits all Dyna Glide models (except Dyna Wide Glide models) from
91-05
609630 Fits all XL models from late 04-Up, chrome
609624 Fits all Sportster models from late 84-03
28935
Fits Touring models from 88-96 (repl. OEM 49184-88)
28929
Fits 4-speed FL models from late 79-84 (repl. OEM 49040-79)
28928
Fits 4-speed FL models with swingarm frames from 58-E79 (repl.
OEM 49038-58B)
Black Front 1 1/4“-Diameter Highway Bars
609625 Fits FL Softail models from 00-13, black
609626 Fits FX Softail models from 00-Up, black
609633 Fits FXDWG & FXDF models from 06-13, black
609627 Fits Dyna Wide Glide models from 93-05, black
609628 Fits all Dyna Glide models (except Dyna Wide Glide models) from
91-05, black
609631 Fits all XL models from late 04-13, black
609629 Fits all Sportster models from late 84-03, black
Rear Highway Bars
28930
Fits 4-speed chain drive FL models from late 67-84 (repl. OEM
49137-67B) 7/8" tubing
28934
Fits Softail models from 86-99 (except 90-99 FL Softail models)
repl. OEM 49158-89B (1" tubing)
28928
28929
SEATS &
TOURING
FOOT
CONTROLS
28933
HAND
CONTROLS
28932
LIGHTING
ELECTRICAL
28934
28930
EXHAUST
INTAKE
609625
28935
ENGINE
GASKETS
Warning: These reproduction Highway Bars are for cosmetic use only and will not provide leg
or vehicle protection in the event of a low-speed fall. They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object.
TRANNY &
CLUTCH
DRIVELINE
WHEELS, TIRES
& BRAKES
FRAMES
FORKS &
SHOCKS
Khrome Werks Chrome Highway Bars for Softail Models
Heavy gauge, 1"-diameter steel tubing for that classic 50's look. Front bar kit
includes a special oil cooler relocation bracket. All necessary mounting hardware is
included. Made in the USA.
31416
Rear highway bar for all FL Softail models from 86-13 (except FLSTF and 93-96
FLSTN models). Also works well in conjunction with our Khrome Werks Trailer
Hitch for Softail models from 86-13 (CC#31414)
Warning: These highway bars are for cosmetic use only and will not provide leg or vehicle protection in the
event of a low speed fall. They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object.
SHEETMETAL
INSTRUMENTS
& GAUGES
LUBRICANTS &
CHEMICALS
Note: 90-99 FLSTC models require the installation of CC #28927 Bracket Kit to replace
the Original Equipment brackets which attach the saddlebag support frame to the
footpeg bolt. Additionally, neither of CC’s chrome toolbox kits may be installed
because of contact with the saddlebag support frame.
www.custom-chrome-europe.com
TOOLS &
EQUIPMENT
14.19
LAST MINUTE
Doss Switch Mount Housing
This ignition key switch housing is intended to
be welded to your frame.
62344
Fits custom applications
Note: Must use CC #12286 ignition switch.
Teardrop Tool Boxes
Our popular chrome reproductions of the
Original Equipment ‘teardrop’ tool box used
from 40-59 are available in two different versions, with your choice of the old-style lock or
a more modern, conventional tumbler lock for
improved security.
26457
Tool box with conventional tumbler
lock
Colony Tool Box Mounting Kit
36183
A complete hardware kit for mounting
the tool box on models from 36-61.
Use these holes if ignition
switch is behind oil tank.
Excess may be removed.
Tool Box Mounting Bracket
Mounts a teardrop-shaped tool box (CC
#26469) to the rear passenger peg block on the
left side. Fits 4-speed Big Twins (except Softail
models) from 77-86. The stock passenger pegs
may be turned upside down or relocated to
the bottom stock stud as on earlier models.
26525
Bracket only
651275
Steering Column Lock
651276
FRAMES
26528
14
This little item can solve a lot of big problems.
Secure your bike with a steering column lock.
In Europe, it is a must to match TÜV approval
and getting insurance for a custom made bike.
86519
Steering column lock with two keys
686321 Weld-on lock housing
651278
26527
Early Style Tool Boxes by Paughco
Reproductions of the original early model tool
boxes. Available in a smooth or ribbed version
and in a chrome or black finish. Made in the
U.S.A.
Chrome
651275 Chrome, Smooth early style tool box
Black
651276
651278
Black, Smooth early style tool box
Black, Ribbed early style tool box
Tool Box Mounting Brackets
Original-style weld-on mounting brackets to
mount CC reproduction tool boxes on vintage
models. This bracket will work on stock as well
as most custom rigid frames.
26527
37-52 bracket. Mounts either the
square or teardrop (CC #26469) tool
box
26528
53-57 bracket. Mounts the teardrop
shape (CC #26469) tool box only
Steering Lock by SCS
682450
14.20
Steering lock, complete short (12mm)
FRAMES
APPAREL
631095
SEATS &
TOURING
Kustom-Tech Weld On Kickstand
Kit
Chrome Kickstand Kits for Softail
Models
Complete chrome kickstand kits are available
in 1" or 2" under stock length for lowered
bikes. Include all necessary hardware. Fit all
Softail models from 89-99
15212
-1" under stock length
600690 -2" under stock length, stand only
Hide the spring with the Kustom Tech weld-on
kickstand, it utilizes an internal ball and spring
for a clean look. Machined from billet steel, in
raw steel or chrome finish.
696043 Weld on kickstand, raw
696044 Weld on kickstand, chrome
631094
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
Ness Hidden Spring Kickstand
Kits
Softail Kickstand Kits
Complete kickstand kits for 89-99 Softail models in either a stock length or +1 inch over
stock
91991
Kit with stock-length kickstand
• The ultimate in custom kickstands for your
lowered application
• Features internal spring loaded ball bearing
lock for a cleaner look and optimum functionality
• The telescopic chrome kickstands are adjustable in height by 1 inch
• Mounting brackets are machined from
polished stainless steel to eliminate chrome
wear in high contact areas
• All of these kits feature a hidden ball bearing design return spring for positive stock
feel and retaining clean look
631094 Telescopic kickstand for 84-99 Softail,
4-speed Big Twins and custom applications
631095 Rad II kickstand for 84-99 Softail,
4-speed Big Twins and custom applications
EXHAUST
Chrome Kickstand for Lowered
Dyna Glide Models
Chrome kickstand is available 1" under stock
length for lowered bikes. Fits Dyna Glide models from 91-Up except Dyna Glide Convertible
models.
16003
-1" under stock kickstand
INTAKE
ENGINE
GASKETS
TRANNY &
CLUTCH
DRIVELINE
659128
Ness 1” Lowered Kickstands
• A must when lowering your bike
• Available for both Touring and Softail models
• Chrome-plated forged steel
631098 Fits 84-06 Softail models
631100 Fits 07-Up Softail models
631099 Fits 07-Up Touring models
681273
659129
WHEELS, TIRES
& BRAKES
FRAMES
FORKS &
SHOCKS
687833
Chrome ‘Springless’ Kickstands
by Matt Hotch Designs
Clean hidden spring design with a completely
smooth chrome-plated arm. Available in a
Straight or Angled arm design. Fits all 84-99
FXST models and all 4-Speed FX models. Made
in the U.S.A.
659128 Bolt-On straight arm kickstand
659129 Bolt-On angled arm kickstand
688171
SHEETMETAL
Complete Custom Billet
Aluminum Kickstand Kit
Complete adjustable kickstand kit for Comet
forward controls on all models from 86-11.
687833 chrome
687945 black
Universal Kickstand for Custom Bikes
681273 Sold each
www.custom-chrome-europe.com
INSTRUMENTS
& GAUGES
Chrome Kickstands for Sportster
Models
Available in a stock length or -1” for lowered
bikes. Fits Sportster models from 04-14.
610412 Stock length kickstand
610411 -1” under stock length kickstand
688171 Kickstand clevis pin fits XL models
89-14
14.21
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
LAST MINUTE
28208
Chrome Weld-On Kickstand by TC Bros
Get rid of your ugly stock kickstand and replace it with TC Bros. Choppers
super clean chrome kickstand with hidden spring. Kit includes chrome
kickstand and weldable mild steel block coped to fit 1 1/8” tubing on
your frame.
660913 Weld-on hidden spring kickstand
‘Burly’ Kickstand Angle Plates by White Bros.
Correct the kickstand angle of modified bikes before they fall over. Billet
aluminum angle plates mount under the kickstand to quickly provide a
stable and aggressive look when parked. Includes hardware and shims.
28207
For lowered Softail models from 84-99
688174
688173
Kickstands for Late Softail Models
692230
Stock length replacement kickstands for 07up Softail models, available in
black or chrome finish.
688173 Kickstand for 07-Up Softail models, chrome
688174 Kickstand for 07-Up Softail models, black
FRAMES
170140
Kickstand wedge
170140
692230
14
Kickstand wedge Big Twins
Kickstand wedge Big Twins - extra thick
Kickstand Wedge Kit for Touring Models
Allows the use of the stock kickstand when the bike is lowered, without
excess lean. All mounting hardware is included.
688695 Kickstand wedge FLT 84-08
Pro-One Kickstand Angle Plate for Softail Models
Lowered bikes can make Original Equipment side stands nearly useless,
leaving a bike precariously balanced when parked. This clever design
restores the correct angle to the kickstand to support the bike safely.
65303
Fits all Softail models from 84-99
14.22
FRAMES
APPAREL
SEATS &
TOURING
FOOT
CONTROLS
Replacement kickstand spring
688183
Kickstand Repair Kit
Replacement kickstand spring, chrome
for models 02-11
HAND
CONTROLS
Includes mounting bracket, leg stop, spring
plate and spring. Fits 4-speed Big Twin models
36-86 (except FXST).
170110
Kickstand Bumper for Softail
681254
Replacement kickstand bumper fits Softail
models 89-06. Also used on many one-piece
fuel tanks on FX, FXE and XL 73-E84. Sold in
10 pack
170129 Replaces OEM 62123-66
688640 Replaces OEM 62123-07, each
LIGHTING
ELECTRICAL
EXHAUST
688185
Kickstand Stop for Softail and
4-Speed Models
INTAKE
This innovative little stop provides one of the
first alternatives to letting the kickstand bang
into the primary case when returning. Fullyadjustable, it installs on the kickstand shaft and
keeps it aligned with the primary but stops the
kickstand just short of banging into it.
31461
Fits all 4-speed Big Twins from 58-84
(except FXWG) and Softail models
from 89-06
ENGINE
688186
GASKETS
688187
TRANNY &
CLUTCH
Sportster Kickstand Plate by
Cheirons
688188
Kickstand Springs
High quality replacement kickstand springs.
Sold each.
688185 Fits 91-01 Dyna models (replaces OEM
50057-91)
688186 Fits 99-06 Touring models (replaces
OEM 50112-99)
688187 Fits FXST 85-06, FXR 91-94, FLT 91-98
and XL 86-09 (replaces OEM 50005-85)
688188 Fits 37-84 FL, 84 FXST, 80-90 FLT, 52-83
XL and K-models (replaces OEM 5001130A)
688184 Fits 07-Up Softail and Touring models
(replaces OEM 49725-07A)
681254 Fits 07-Up Softail and Touring models
(replaces OEM 49725-07A)
Easy Place kickstand plate for Sportster kickstands. This plate makes it easier to fold the
kickstand out and provides more standing
surface on weak surfaces. Available polished or
black fits most Sportster and Nighster models.
619622 Easy Place, polished, 04-14
619623 Easy Place, black, 04-14
DRIVELINE
WHEELS, TIRES
& BRAKES
FRAMES
FORKS &
SHOCKS
SHEETMETAL
INSTRUMENTS
& GAUGES
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
www.custom-chrome-europe.com
14.23
LAST MINUTE
605219
605216
Küryakyn Neck Covers for Softail Models
Deluxe Neck Covers For Touring Models by
Küryakyn
These add just the right touch of edge & functionality. They hide those
welds and wires near the front of the neck on your bike in one quick
and easy step. The deluxe set includes upper covers and downtube covers.
600715 Deluxe neck cover set for 08 Touring models
605222 Deluxe neck cover set for 09-13 Touring models
Masking the roughly finished forged frame neck on a Twin Cam Softail
is now as easy as two screws and a few minutes of your time. Weve
designed a smooth and cleanly contoured set of stamped steel neck covers to work on Softail Models. These beautifully chromed covers mask the
wiring and give your bikes neck a finished appearance.
605214 Chrome neck covers for 07-13 FLSTC, FLSTF, FLSTN
605219 Chrome neck covers for 00-06 FLST, FLSTC, FLSTF, FLSTN
605213 Chrome neck covers for 86-99 FLSTC, FLSTF, FLSTN
605220 Chrome neck covers for 00-06 FXST Standard & Night Train
605217 Chrome neck covers for 00-07 FXSTD Deuce Models
FRAMES
Optional Down Tube Covers
By popular request! Lots of you asked for these for the Softails when you
saw the ones for the baggers. Snap-on installation makes this an easy
way to chrome the front frame down tubes.
605218 Chrome down tube covers for 07-13 Softail models (except
FXCW/C)
605216 Chrome down tube covers for 00-06 Softail models
605215 Chrome down tube covers for 92-99 Softail models
14
Küryakyn Mid-Frame Cover for Touring Models
Create a smoother look by concealing unsightly frame welds with these
luscious, chrome-plated steel covers. Installs easily in just a matter of
minutes.
605249 Mid-Frame covers for 09-13 FLHT, FLTR, FLHX & FLHR
605246 Mid-Frame covers for 08 Electra Glides, Road Glides, Street Glides
& Road Kings
605247 Mid-Frame covers for 97-07 Electra Glides, Road Glides, Street
Glides & Road Kings
14.24
Küryakyn Neck Covers For Dyna Models
Kuryakyn developed this stylized chrome cover to put a visually pleasing face on this beefy section of the Dyna frame. Welds, square edges,
joints and wires are neatly hidden from view. The neck cover's contours
complement the shape of the fuel tank and the added glint of vibrant
chrome looks great with any paint job!
605223 Dyna neck cover 06-11 Dyna models (except 06-11 FXDWG)
FRAMES
APPAREL
SEATS &
TOURING
600732
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Chrome Swingarm & Axle Cover Sets For Softails by
Küryakyn
ELECTRICAL
600734
Finally someone has come up with an alternative to the downtime and
expense of outfitting your Softail with a chrome swingarm.
Complete kits with Unlighted Phantom Covers
Super clean set covers the axle, upper and lower tubing, and the upper
section of the swingarm.
600734 Fits All 00-07 Softails (except 00-07 Deuce, 06-up FX Softails)
600735 Fits 00-07 Deuce models
600736 Fits All 86-99 Softail models
605259 Fits all 06-07 FXST, FXSTB, FXSTC, FXSTS, ’07 FLSTF
EXHAUST
INTAKE
ENGINE
Complete kits with Lighted Phantom Covers
All the features of the Unlighted sets, but the Phantom covers feature
a band of rear facing, bright red L.E.D.’s. The L.E.D.’s are single function
and can be wired as auxiliary running lights, turn signals, or brake lights.
For increased visibility.
600732 Fits All 00-07 Softails (except 00-07 Deuce, 06-up FX Softails)
600733 Fits All 86-99 Softail models
Note: Lighted Phantom covers are not DOT approved nor are they intended to replace stock turn
signals or taillights.
GASKETS
TRANNY &
CLUTCH
600720
DRIVELINE
WHEELS, TIRES
& BRAKES
Chrome Swingarm & Axle Cover Sets for 08-13
Softails by Küryakyn
Finally someone has come up with an alternative to the downtime and
expense of outfitting your Softail with a chrome swingarm.
Complete kits with Unlighted Phantom Covers
Super clean set covers the axle, upper and lower tubing, and the upper
section of the swingarm.
600720 Fits All 08-13 Softails (except FLSTF & FLSTN unless the stock shotgun style exhaust has been removed)
FRAMES
600721
FORKS &
SHOCKS
Complete kits with Lighted Phantom Covers
All the features of the Unlighted sets, but the Phantom covers feature
a band of rear facing, bright red L.E.D.’s. The L.E.D.’s are single function
and can be wired as auxiliary running lights, turn signals, or brake lights.
For increased visibility.
600719 Fits All 08-13 Softails (except FLSTF & FLSTN the stock shotgun style
exhaust has been removed)
Tube Covers ONLY
These are perfect for bikes that already have Phantom covers or similar
style axle covers. These cover the upper & lower tubing and upper sections of the swingarm. In some instances depending on the rear axle covers you may have a small gap between the tube covers and axle covers.
600721 Fits all 08-13 Softail models
SHEETMETAL
INSTRUMENTS
& GAUGES
600719
LUBRICANTS &
CHEMICALS
TOOLS &
EQUIPMENT
Note: Lighted Phantom covers are not DOT approved nor are they intended to replace stock turn
signals or taillights.
www.custom-chrome-europe.com
14.25
LAST MINUTE
Chrome Rear Frame Covers for
Softail Models
Dress up the rear section of your Softail. Made
of chrome plastic installs in minutes with silicone
adhesive included (sold in pairs).
78054
Fits all Softail models except Fat Boy and
FLSTN models 86-99
Chrome Swingarm Pivot Bolt
Covers for Softail Models
These covers are held in place with set screws
and look great when installed in conjunction
with CC #28266 chrome rear frame covers.
They fit all Softail models from 84-07 (except
Fat Boy and FLSTN models). Sold in pairs.
14317
Pivot bolt cover for Softails 84-99
688179 Pivot bolt cover for Softails 00-07
Chrome Boomerang Frame Covers by
Küryakyn
These are one of Küryakyns most popular Softail
accessories. These high quality die-cast covers feature a ‘ball-milled’ detail and lush chrome finish.
Sold as a set.
600741 Fits all FXST models and all FLST models
WITHOUT OEM Shotgun exhaust from
86-99
605260 Boomerang Covers for all 00-07 FXST
(except Deuce) & all 00-07 FLST (except Fat
Boy & Deluxe...see Note)
600742 Fits all 00-06 Fat Boy and 05-07 Deluxe
models with OEM Shotgun style exhaust
Swingarm Cover by Cult Werk
Fits all V-Rod & Night Rod models
02-11
FRAMES
618465
14
Chrome Swingarm Axle Covers
Cover up the ugly cluttered axle adjusters and axle nut with these show chromed covers. They
come with all required hardware. Will not work on models with stock saddlebags.
688197 Swingarm Axel covers 86-07 Softail except FLSTS
Chrome Pivot Bolt Cover for Late
Sportster Models
Chrome Swingarm Pivot Covers for
Softails by Küryakyn
These are a quick and easy way to cover those ugly ends
of the swingarm pivot shaft on your Twin Cam Softail.
Chrome-plated and sold in pairs.
600737 Fits all Twin Cam Softails from 00-07 (except 00-05
FLSTN, 07 FLSTF, & 07 FXSTD)
14.26
Fits over the exposed head of the swingarm
pivot bolt on all Sportster models from 82-03.
It features chrome-plated die-cast construction and is held firmly in place by a sockethead
screw.
14318
Sold each