Water-based Polyurethane and Acrylate

ALBERDINGK BOLEY | Water-based Polyurethane and Acrylate Dispersions
Water-based Polyurethane
and Acrylate Dispersions
Water-based Polyurethane
and Acrylate Dispersions
Alberdingk® aqueous polyurethane and
acrylate dispersions for high-quality
textile and leather coatings
for textile and leather coatings
Main applications:
Exemption clause:
The aforesaid information is based on our present state of
› textile coatings
knowledge and shall inform on our products and their application
› leather finish
possibilities. It is not intended to assure certain characteristics of
the products and their suitability for precise application fields.
Customer-specific requirements need individual
Please consider possible industrial property rights.
solutions. Therefore please contact us in any case so
that we can both offer advice and support before
commencing any development work.
Alberdingk Boley GmbH | Düsseldorfer Str. 53 | 47829 Krefeld | Germany
Tel +49 2151 528-0 | Fax +49 2151 573643 | [email protected]
www.alberdingk-boley.de
For further information please contact us under:
Alberdingk Boley, Inc. | 6008 High Point Road | Greensboro NC 27407 | USA
[email protected]
Phone +1-336/454-5000 | Fax +1-336/454-5007 | [email protected]
www.alberdingkusa.com
Alberdingk Resins (Shenzhen) Co., Ltd. | (West) 1st/2nd Floor | Building D
Huanyu Industrial Park | Xuefu Road | Xingwei | Huangtian | Xixiang
Bao’an District | Shenzhen | Guangdong Province | 518128 | P. R. China
Phone +86-755-33808666 | Fax +86-755-33800718 | [email protected]
Release 08 / 2011
www.alberdingkchina.com
ALBERDINGK® Aliphatic Polyurethane Dispersions
CUR 21
x
U 205
x
U 2101
x
U 3100*
x
U 3251
x
U 3700*
x
U 400 N
x
x
•
x
•
U 4101*
x
x
x
Type
100% Modulus [N / mm²]
Elongation at Break [%]
Tensile Strength [N / mm²]
MFFT [°C]
Viscosity [mPas]
pH-Value
ALBERDINGK BOLEY | Water-based Polyurethane and Acrylate Dispersions
ALBERDINGK® Aliphatic Polyurethane Dispersions
x
x
Solids [%]
Leather-Topcoats
Leather-Skincoats
Leather-Basecoats
ALBERDINGK BOLEY | Water-based Polyurethane and Acrylate Dispersions
Artificial Leather
Bonding / Lamination
Pigment Printing
Textile Coatings
ALBERDINGK BOLEY | Water-based Polyurethane and Acrylate Dispersions
ALBERDINGK® Aliphatic Polyurethane Dispersions
x
x
CUR 21
59 – 61
7.5 – 9.0
600 – 1600
0
ca. 12
ca. 900
ca. 1.0
PES / PU
CUR 21
High solid PUD, universal binder, soft and silky film with low gloss
x
x
U 205
39 – 41
7.0 – 8.0
20 – 200
0
ca. 10
ca. 600
ca. 3.0
PE / PU
U 205
PUD with high elongation and good hydrolysis-resistance
x
x
U 2101
59.5 – 61.5
7.5 – 9.5
600 – 1400
0
ca. 19
ca. 800
ca. 1.5
PES / PU
U 2101
High solid PUD, universal binder with good frothability, soft and rubberlike film
x
x
x
U 3100*
32 – 34
7.5 – 9.5
20 – 200
0
ca. 30
ca. 750
ca. 4.5
PES / PU
U 3100*
Finedisperse PUD with good wetting and adhesion, for topcoats on PU & PVC, medium hard
x
x
x
U 3251
39 – 41
7.0 – 8.0
20 – 200
0
ca. 20
ca. 650
ca. 3.3
PES / PU
U 3251
Universal PUD with high gloss and excellent Ballyflex-resistance, favoured for transfer- / release coatings
x
x
x
U 3700*
35 – 37
8.0 – 10.0
20 – 200
0
ca. 16
ca. 600
ca. 5.0
PC / PU
U 3700*
Superior hydrolysis-resistance, especially suitable for car-interior leather coatings
x
x
x
U 400 N
39 – 41
7.0 – 8.0
20 – 200
0
ca. 30
ca. 700
ca. 3.0
PE / PU
U 400 N
Excellent hydrolysis-resistance, for artificial leather and pigment printing
x
x
U 4101*
39 – 41
7.0 – 8.5
50 – 750
0
–
–
–
PE / PU
U 4101*
PUD with tacky film, very good adhesion to different substrates, as adhesion promoter for laminations
U 5201
39 – 41
7.5 – 8.5
50 – 300
0
ca. 25
ca. 500
ca. 6.5
PES / PU
U 5201
Polyester-PUD with very good hydrolysis-resistance for high quality topcoats
x
x
U 5201
x
U 6150
x
x
U 6150
37 – 39
7.5 – 9.0
50 – 500
0
ca. 25
ca. 200
ca. 20
PC / PU
U 6150
Good weathering- and aging-resistance, high gloss
U 6800*
x
x
U 6800*
32 – 34
8.0 – 9.5
20 – 200
0
ca. 25
ca. 500
ca. 10
PC / PU
U 6800*
Very good adhesion to lots of substrates, good weathering- and aging-resistance, high gloss
U 8001
x
x
U 8001
39 – 41
7.0 – 8.0
20 – 200
6
ca. 22
ca. 70
–
PES / PU
U 8001
For coatings and stiffenings, very good compatible with different flame-retardant additives
•
ALBERDINGK® Acrylate-Copolymer Dispersions
AC 2714*
ALBERDINGK® Acrylate-Copolymer Dispersions
x
AC 2523
x
•
x
x
AC 2592
x
•
x
x
x
x
AC 548
X recommended • possible * new development
x
x
x
ALBERDINGK® Acrylate-Copolymer Dispersions
x
AC 2714*
43 – 45
8.0 – 9.0
30 – 300
50
–
–
–
AC 2714*
Universal multiphase acrylic, selfcrosslinking, excellent chemical resistance
x
AC 2523
47– 49
7.5 – 8.5
500 – 4000
0
ca. 15
ca. 150
ca. 12
AC 2523
Multiphase acrylic, selfcrosslinking, good blocking resistance and wet adhesion, high gloss
AC 2592
34 – 36
7.5 – 8.5
20 – 200
0
–
–
–
AC 2592
OH-functional acrylic, very good adhesion to hydrophobic leather (after 4 – 8 days aging),
OH-value 73 mg / KOH / g on solids, Tg = -35 °C
AC 548
49 – 51
7.5 – 8.5
3000 – 6000
13
ca. 9
ca. 500
ca. 2.0
AC 548
Pure acrylic for different applications, suitable as flock adhesive or leather basecoat
* new development
PES polyester PU polyurethane PC polycarbonate PE polyether
* new development