Catalogue of standard products -201

Transcription

CONTENTS
Types
Equipment selection for appropriate areas ................................................................................................................................................................................................................................................. 2
Connection of electrical circuits
Junction boxes for lighting application ............................................................................................................................... X20X1 OS.. .........................New variant OS22............................. 3
Junction boxes for instrumentation application ................................................................................................................... X20X1, X20X1/JB TC, MaR........................................................... 5
Junction boxes for XCW limit switches ..................................................................................................................................... X12X1 XCW......................................................................................... 6
Transition junction boxes................................................................................................................................................................ X.X1, X.X2 PK..................................................................................... 7
Motor terminal boxes ....................................................................................................................................................................... X.X1, X.X2 PM.................................................................................... 8
DEP SHELL Stainless steel junction boxes ................................................................................................................................ X.X2, X.X2/JB DEP........................................................................... 9
Junction boxes – Overview............................................................................................................................................................. X.X0, X.X1, X.X2............................................................................ 10
Control of el. circuits, signalling, measurement of el. parameters
Single spring-loaded pushbuttons, Mushroom-head pushbuttons ............................................................................. X20SA1 V0.. ......................................................................................11
Double pushbuttons, indicators .................................................................................................................................................. X20SA1 V0.. ..................................................................................... 12
Switches, pushbutton / indicator, switch / indicator ........................................................................................................... X20SA1 V... .......................Expansion for version 16A............ 13
Locking switch, double pushbutton / indicator, triple pushbutton .............................................................................. X20SA1 V... ..................................................................................... 14
Potentiometer box ............................................................................................................................................................................ X20SA1 RP ....................................................................................... 15
Indirect A-meter box ........................................................................................................................................................................ X20SA1 PA........................................................................................ 15
Control boxes ...................................................................................................................................................................................... X23SA1 V2.. ..................................................................................... 16
Junction and signalisation boxes for heating cables ........................................................................................................... X20X1 TK., X20SA TK. ..Expansion X20SA TK for 16A....... 21
Fuse box, components for control and indication boxes ................................................................................................... X26SA1 FU..A.....................Expansion for 12,5A and 16A.... 23
Control boxes – Overview .............................................................................................................................................................. X.SA0, X.SA1, X.SA2.................................................................... 24
Surge protections .................................................................................................................................................................................... X.FV./…, X.FV./…/JB................................................................... 25
Motors ......................................................................................................................................................................................................... X551M2............................................................................................. 26
Transformer and socket boxes .......................................................................................................................................................... X.XS(T)............................................................................................... 27
Portable lighting kit ................................................................................................................................................................................ XEL....................................................................................................... 28
Extension leads.......................................................................................................................................................................................... XSXP................................................................................................... 29
Distillation apparatus............................................................................................................................................................................. RP..Ex.................................................................................................. 30
Active liquid separator.......................................................................................................................................................................................................................................................................................... 31
Suspended and flameproof control boxes and stations ...................................................................................................... XAW-P, X201MSe, X201MSd................................................... 32
Flameproof distributors and enclosures ..................................................................................................................................... X103HM, X40..DA2, X40DA2/d.............................................. 33
Limit switches.............................................................................................................................................................................................. XCW, XC8.......................................................................................... 35
Magnetic, inductive and capacitive sensors ............................................................................................................................................................................................................................................. 36
Cable glands and plugs ......................................................................................................................................................................... V-TEC, HSK, 50P, 70P, S.............................................................. 37
Ex Components
Installation boxes for electrical equipment – Stainless steel ............................................................................................ XN........................................................................................................ 40
Indicators Ex e, Ex i ; fuses, termination elements ................................................................................................................ XHL, XHL/JB, XFU, XZ....Expansion XFU for 12,5A, 16A.. 41
Cam switch............................................................................................................................................................................................ XSV...................................................................................................... 42
Bush wiring .......................................................................................................................................................................................... D…x., M…x........................Expansion for type M10............... 43
Transformers, potentiometer ........................................................................................................................................................ XTO, X195RP................................................................................... 44
Plugs and sockets ..................................................................................................................................................................................... DXN1, DX3, DXN6......................................................................... 45
Light fittings
Incandescent, discharge ................................................................................................................................................................................................................................................................................ 46
Fluorescent, reflectors .................................................................................................................................................................................................................................................................................... 48
Hand, alarm and portable lamps ................................................................................................................................................................................................................................................................ 50
Optical and signalling equipment .................................................................................................................................................................................................................................................................. 53
Protection boxes for instrumentation ......................................................................................................................................................................................................................................................... 54
Heaters for protection boxes ....................................................................................................................................................................................................................................................................... 55
Heat tracing systems .............................................................................................................................................................................................................................................................................................. 56
GENERI, s.r.o. reserves the right to update technical parameters and range of products without prior notice.
GENERI, s.r.o.
CONTENTS
Page: 1
EQUIPMENT SELECTION FOR APPROPRIATE AREA – data mentioned for all equipment in this catalogue
REMINDER:
The demands on Ex-proof equipment construction have been changed substantially - European norms (EN) have adapted norms idt resp. modified IEC 60 079-.. (Gases
and vapours) and IEC 61 241-.. (dusts).
Most of the products of GENERI s.r.o. have already been certified according to new norms and have new designation Ex... instead of the older EEx... .
GROUP AND CATEGORY
Equipment approved according to ATEX must be marked by group and category of product (e.g.: II 2GD; I M1). You can determine which areas the equipment is suitable
for from the marking:
Group I (equipment for mines with presence of methane)
Category
Marking
M1
M2
I M1
I M2
EQUIPMENT IS SUITABLE FOR AREA
Dangerous (atmospheric) conditions 2
Dangerous (atmospheric) conditions 1
(Area with danger of explosion)
(Explosive atmosphere)
SNP, SNM with methane concentration ≤ 1,5% **
SNP***, SNM with methane conc. > 1,5 % **
ОK
ОK
ОK
Cannot be used
*
Classification of areas according ČSN EN 1127-2:2003 Explosive areas – Precautions and protection against explosion - Part 2: Basic conceptions and methodology for
mines, the ČSN EN 1127-2 norm replaced the outdated ČSN 34 1410:1985.
** SNM is equipment of mining areas under methane exposure, as stated by The Czech Mining Institute (ČBÚ) promulgation no. 282/2007 Sb. This promulgation updates
ČBÚ no. 22/1989 Sb. Former marking of areas with presence of methane SNM 1, SNM 2 a SNM 3 are labelled SNM only, areas SNM 0 are now designated BNM. Former
areas with danger of explosion of coal dusts SNP 1 a SNP 2 are now marked SNP only. Areas SNP 0 are now labelled BNP.
*** Refers to coal containers and areas directly adjacent to it in 30 m radius
Group II (equipment for explosion areas other than underground mines with presence of methane)
Category
1G
Gases: 2G
3G
1D
Dusts: 2D
3D
Marking*
II 1G
II 2G
II 3G
II 1D
II 2D
II 3D **
ZONE 0
ОK
Cannot be used
Cannot be used
–
–
–
ZONE 1
ОK
ОK
Cannot be used
–
–
–
EQUIPMENT IS SUITABLE FOR AREA
ZONE 2
ZONE 20
ОK
–
ОK
–
ОK
–
–
ОK
–
Cannot be used
–
Cannot be used
ZONE 21
–
–
–
ОK
ОK
Cannot be used
ZONE 22
–
–
–
ОK
ОK
ОK
* Equipment suitable for gas and dust together is usually marked II 2GD etc.
** Equipment in category 3 cannot be used in areas of zone 22 with presence of conductive dust
TEMPERATURE CLASS
Other important data present on the label is the temperature class. It is the maximum surface temperature of electrical equipment. In lighting applications this temperature
is described by several data and in dependence on the ambient temperature Tamb (or Ta ).
Temperature class:
Max. equipment surface temperature:
T1
450 °C
T2
300 °C
T3
200 °C
T4
135 °C
T5
100 °C
T6
85 °C
MAXIMUM SURFACE TEMPERATURE OF ENCLOSURE T
This temperature is given only for equipment suitable for areas where flammable dust can occur.
II 3D T130°C (old norm ČSN EN 50 281-1-1)
Example of marking:
II 3D Ex tD A 130°C (new norm ČSN EN 61 241-0)
Equipment for gases and dusts:
II 2GD Ex e II T6 T85°C (old norms ČSN EN 50 014 and ČSN EN 50281-1-1)
II 2GD Ex e tD A II T6 T85°C (new norms ČSN EN 60 079-0 and ČSN EN 61 241-0)
For more information on classification of our products and their correct use in explosion areas please contact [email protected].
INTRODUCTION
Page: 2
GENERI, s.r.o.
ZONE 1,2 – ZONE 21, 22
JUNCTION BOXES FOR LIGHTING APPLICATIONS X12X1 OS22
• Certified according to ATEX
• Application in the areas with danger of explosion:
ZONE 1 & 2
ZONE 21 & 22
• Suitable for electrical installation of lighting including 3phase electricity distribution
• Small dimensions, low price
• Connection only of stiff conductors with cross-section 1,5 or 2,5 mm2
• Mechanically and chemically resistant box made from polyester forced by glass fibre.
• Antistatic
• „Without revision“ unscrew terminals with easy overhand connection of wires only by pushing in of
stripped wire without using any tool
• Degree of protection min. IP 66
X12X1 OS22
Technical data:
Type of protection:
Degree of protection:
Ambient temperature*:
Nominal voltage:
Nominal loading:
Box dimensions (w x h x d):
Terminals:
Cable glands:
II 2GD Ex e tD II T6 T85°C
IP 66
-50°C ≤ Ta ≤ +40°C
3 × 400 V
1,5 mm2: 13 A; 2,5 mm2: 16 A
(80 × 75 × 55) mm
WAGO, 4 pcs 4 × 2,5 mm2 + PE
4 pcs M20 (Ø5,5 – Ø13) mm + 2 pcs plug M20 (accessories)*
* Plugs are ussually delivered for ambient temperature range -20°C ≤ Ta ≤ +40°C.
68
9.
45
4xM4
Example of 4 cables connection CYKY 5C×2,5mm2
GENERI, s.r.o.
Type: Х20Х1 OS22
Fixing holes
Page: 3
JUNCTION BOXES FOR LIGHTING APPLICATIONS ZONE 1,2 – ZONE 21, 22
POLYESTER BOXES TYPE X20X1
Type of protection:
Nominal voltage:
Dimensions (w × h × d):
II 2GD Ex e tD II T6 T85°C IP66
550 V
(122 × 120 × 90) mm
Terminals
Cable glands
Weight
Order No.
WAGO
4 pcs 3 × 4,0 mm2
grey
+ PE bar
4 pcs P16
(Ø 7 – Ø 14) mm
2 pcs plug P16
(enclosed)
0,98 kg
X20X1 OS01
Terminals
Cable glands
Weight
Order No.
WAGO
*8 pcs 2 × 4,0 mm2
grey
+ PE bar
4 pcs P16
(Ø 7 – Ø 14) mm
2 pcs plug P16
(enclosed)
1,00 kg
X20X1 OS02
* Terminals are interconnected into 4 pairs.
Terminals
Cable glands
Weight
Order No.
WAGO
4 pcs 2 × 6,0 mm2
grey
+ PE bar
3 pcs M25
(Ø 12 – Ø 18) mm
1 pc plug M25
(enclosed)
1,00 kg
X20X1 OS03
Terminals
Cable glands
Weight
Order No.
WAGO
*8 pcs 2 × 6,0 mm2
grey
+ PE bar
3 pcs M25
(Ø 12 – Ø 18) mm
1 pc plug M25
(enclosed)
1,10 kg
X20X1 OS04
Terminals
Cable glands
Weight
Order No.
WAGO
*8 pcs 2 × 6,0 mm2
grey
+ PE bar
4 pcs M25
(Ø 12 – Ø 18) mm
1 pc plug M25
(enclosed)
1,10 kg
X20X1 OS05
Quotations for specific modifications as well as detailed technical information for type X.X1 are available on request at [email protected].
Page: 4Type: Х20Х1 OS..
GENERI, s.r.o.
ZONE 1,2 – ZONE 21, 22 JUNCTION BOXES FOR INSTRUMENTATION APPLICATIONS
POLYESTER BOXES TYPE X20X1, X20X1/JB
type X20X1:
Type of protection:
Nominal voltage:
Un = 550 V
Dimensions (w × h ×d):
type X20X1/JB:
II 2GD Ex ia tD IIC T6 T85°C IP66
Ui = 60 V
(122 × 120 × 90) mm
Boxes for connection of K-type thermocouple
Terminals
WEIDMÜLLER
for thermocouples
2 pcs Ni/Cr 1 pc Fe
2 × 2,5 mm2 grey
WEIDMÜLLER
for thermocouples
2 pcs Ni/Cr 1 pc Fe
2 × 2,5 mm2 grey
Terminals
WAGO mini
6 pcs 2 × 2,5 mm2 grey
1 pc 4 × 2,5 mm2 PE
WAGO mini
6 pcs 2 × 2,5 mm2 blue
1 pc 4 × 2,5 mm2 PE
Terminals
WAGO mini
+
1 pc 4 × 2,5 mm2 PE
WAGO mini
+
1 pc 4 × 2,5 mm2 PE
Terminals
WAGO mini
12 pcs 2 × 2,5 mm2 grey
+
1 pc 4 × 2,5 mm2 PE
WAGO mini
12 pcs 2 × 2,5 mm2 blue
+
1 pc 4 × 2,5 mm2 PE
Terminals
WAGO mini
12 pcs 2 × 2,5 mm2 grey
+
1 pc 4 × 2,5 mm2 PE
WAGO mini
12 pcs 2 × 2,5 mm2 blue
+
1 pc 4 × 2,5 mm2 PE
Cable glands
Weight
Order No.
2 pcs M20 black (Ø 7 – Ø 12) mm
1 pc М16 black (Ø 5 – Ø 8) mm
1 pc plug М16 enclosed
0,88 kg
X20X1 ТС–K
2 pcs M20 blue (Ø 6 – Ø 12) mm
1 pc М16 blue (Ø 4 – Ø 8) mm
1 pc plug М16 enclosed
0,88 kg
X20X1/JB TC–K
Cable glands
Weight
Order No.
2 pcs M20 black
(Ø 7 – Ø 12) mm
0,88 kg
X20X1 MaR01
2 pcs M20 blue
(Ø 6 – Ø 12) mm
0,88 kg
X20X1/JB MaR01
Cable glands
Weight
Order No.
1 pc M20 black (Ø 7 – Ø 12) mm
1 pc plug M16 enclosed
0,88 kg
X20X1 MaR02
1 pc M20 blue (Ø 6 – 12) mm
0,88 kg
X20X1/JB MaR02
Cable glands
Weight
Order No.
1 pc M25 black (Ø 12 - Ø 18) mm
0,97 kg
X20X1 MaR03
1 pc M25 blue (Ø 13 - Ø 18) mm
0,97 kg
X20X1/JB MaR03
Cable glands
Weight
Order No.
1 pc M25 black (Ø 12 - Ø 18) mm
2 pcs plug M16 enclosed
0,98 kg
X20X1 MaR04
1 pc M25 blue (Ø 13 - Ø 18) mm
2 pcs plug M16 enclosed
0,98 kg
X20X1/JB MaR04
Specific modifications are available on request at [email protected].
GENERI, s.r.o.
Type: Х20Х1, X20X1/JB TC, MaR
Page: 5
JUNCTION BOXES FOR INSTRUMENTATION APPLICATIONS ZONE 1,2 – ZONE 21, 22
POLYESTER BOXES TYPE X12X1, X12X1/JB
type X12X1:
type X12X1/JB:
Type of protection:
II 2GD Ex ia tD IIC T6 Т85°C IP66
Nominal voltage:
Un = 550 V
Ui = 60 V
Box dimensions
(80 × 75 × 55) mm
(w × h × d):
Standard:
cable glands on the bottom side
Terminals
WAGO mini
+
1 pc 4 × 2,5 mm2 PE
WAGO mini
+
1 pc 4 × 2,5 mm2 PE
Terminals
WAGO mini
+
1 pc 4 × 2,5 mm2 PE
WAGO mini
+
1 pc 4 × 2,5 mm2 PE
Cable glands
Weight
Order No.
2 pcs M20 black
( Ø 7 – Ø 12) mm
0,35 kg
X12X1 MaR01
2 pcs M20 blue
(Ø6 – Ø 12) mm
0,35 kg
X12X1/JB MaR01
Cable glands
Weight
Order No.
1 pc M20 black (Ø7 – Ø12) mm
2 pcs M16 black (Ø5 – Ø8) mm
0,36 kg
X12X1 MaR02
1 pc M20 blue (Ø6 – Ø12) mm
0,36 kg
X12X1/JB MaR02
JUNCTION BOXES FOR XCW LIMIT SWITCHES ZONE 1,2 – ZONE 21, 22
POLYESTER BOXES TYPE X12X1
Type of protection:
Nominal voltage:
Box dimensions (w × h × d):
Terminals
WAGO mini
4 pcs 2 × 2,5 mm2
+
1 pc 4 × 2,5 mm2 PE
Terminals
WAGO mini
4 pcs 4 × 2,5 mm2
+
1 pc 4 × 2,5 mm2 PE
II 2GD Ex e tD II T6 Т85°C IP66
550 V
(80 × 75 × 55) mm
Cable glands
Weight
Order No.
1 pc M20 (Ø 7 – Ø 12) mm
1 pc М16 (Ø 5 – Ø 8) mm
0,33 kg
X12X1 XCW01
Cable glands
Weight
Order No.
1 pc M20 (Ø 7 – Ø 12) mm
2 pcs М16 (Ø 5 – Ø 8) mm
0,37 kg
X12X1 XCW02
Specific modifications are available on request at [email protected].
Page: 6Type: Х12Х1, X12X1/JB, MaR, XCW
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21,22 TRANSITION JUNCTION BOXES
POLYESTER BOXES TYPE X.X1
Type of protection:
Terminals:
L1, L2, L3, N, PE
see table
Un [V]:
Standard:
2 pcs cable glands on the bottom side without
clamping module.
Х27Х1 PK35
Range of terminals [mm2]
min.
nominal
0,5
4
0,5
6
10
10
0,5
16
2,5
35
10
50
10
70
16
95
Un
[V]
550
550
550
550
750
750
750
750
Dimensions:
(w × h × d ) [mm]
122 × 120 × 90
122 × 120 × 90
160 × 160 × 90
160 × 160 × 90
260 × 160 × 90
255 × 250 × 120
400 × 405 × 120
400 × 405 × 120
Cable glands *
(cable diameter in mm)
2 pcs M20 (Ø 7 – Ø 12)
2 pcs M25 (Ø 12 – Ø 18)
2 pcs M25 (Ø 12 – Ø 18)
2 pcs M32 (Ø 17 – Ø 25)
2 pcs M40 (Ø 22 – Ø 32)
2 pcs M40 (Ø 22 – Ø 32)
2 pcs M50 (Ø 24 –Ø 38)
2 pcs M63 (Ø 37 –Ø 44)
Weight
[kg]
0,9
1,0
1,6
1,6
2,6
3,6
6,6
6,6
Order No.
X20X1 PK04
X20X1 PK06
X25X1 PK10
X25X1 PK16
X27X1 PK35
X37X1 PK50
X45X1 PK70
X45X1 PK95
STAINLESS STEEL BOXES TYPE X.X2
Type of protection:
II 2GD Ex e II tD T6 Т85°C IP66
Terminals:
L1, L2, L3, N, PE (for cable terminals)
750 V
Un:
Standard:
2 pcs flanged cable glands on the bottom with
tension relief
Х342Х2 РK120
min.
nominal
10
120
10
150
10
185
10
240
Dimensions
w × h × d [mm]
400 × 560 × 190
400 × 560 × 190
400 × 800 × 190
400 × 800 × 190
Cable glands *
(cable diameter in mm)
2 pcs: 50P–TOe (Ø 32 – Ø 42)
2 pcs: 50P–TOe (Ø 32 – Ø 42)
2 pcs: 50P–TOe (Ø 40 – Ø 50)
2 pcs: 70P–TOe (Ø 44 – Ø 54)
Weight
[kg]
15,7
15,7
19,5
19,7
Order No.
X342X2 PK120
X342X2 PK150
X343X2 PK185
X343X2 PK240
* Note:
1) If you require different cable glands than the ones mentioned above, you can choose a modified design such as:
X27X1 PK35/M40*/M32*
* substitute the cable gland size or type / diameter of the cable.
2) For connecting more than two cables, please contact our technical services department, we will be glad to design and manufacture boxes according to your
requirements.
Quotations for specific modifications as well as detailed technical information for type X.X1, X.X2 are available at [email protected].
GENERI, s.r.o.
Type: Х.Х1, X.X2 PK
Page: 7
MOTOR TERMINAL BOXES ZONE 1,2 – ZONE 21, 22
POLYESTER BOXES TYPE X.X1
Type of protection:
Terminals:
L1, L2, L3, N, PE
Un [V]:
see table
2 pcs cable glands on the bottom:
Standard:
1st: for moving feed with clamping module
2nd: for fixed feed without clamping module
Х37Х1 PМ35
min.
nominal
0,2
2,5
0,2
4
0,5
6
0,5
10
0,5
16
2,5
35
10
50
10
70
16
95
Un
[V]
550
550
550
550
550
750
750
750
750
Dimensions
(w × h × d ) [mm]
122 × 120 × 90
122 × 120 × 90
122 × 120 × 90
160 × 160 × 90
160 × 160 × 90
255 × 250 × 120
255 × 250 × 120
400 × 405 × 120
400 × 405 × 120
Cable glands (cable diameter in mm)
1 pc
1 pc
М25(Ø 13– Ø 18)
M20 (Ø 12–Ø 17)
M32 (Ø 18–Ø 25)
M20 (Ø 12–Ø 17)
M32 (Ø 18–Ø 25)
M25 (Ø 12–Ø 18)
M40 (Ø 22–Ø 32)
M25 (Ø 12–Ø 18)
M40 (Ø 22–Ø 32)
M32 (Ø 17–Ø 25)
M50 (Ø 32–Ø 38)
M40 (Ø 21–Ø 32)
M63 (Ø 37–Ø 44)
M40 (Ø 21–Ø 32)
М63 (Ø 37– Ø 44)
M50 (Ø 24–Ø 37)
М63 (Ø 37– Ø 44)
M63 (Ø 30–Ø 44)
m
[kg]
1,0
1,0
1,0
1,5
1,6
3,3
3,7
6,7
6,7
Order No.
X20X1 PM02,5
X20X1 PM04
X20X1 PM06
X25X1 PM10
X25X1 PM16
X37X1 PM35
X37X1 PM50
X45X1 PM70
X45X1 PM95
Type of protection:
Terminals:
L1, L2, L3, N, PE (for cable tips)
Un: [V]
750 V
Standard:
2 pcs flanged cable glands on the bottom
with clamping module
Х342Х2 РM120
min.
nominal
10
120
10
150
10
185
10
240
Dimensions
(w × h × d ) [mm]
400 × 560 × 190
400 × 560 × 190
400 × 800 × 190
400 × 800 × 190
Cable glands (cable diameter in mm)
1 pc
1 pc
70P–TOe (Ø 52 – 62)
50P–TOe (Ø 32 – 42)
50P–TOe (Ø 40 – 50)
50P–TOe (Ø 32 – 42)
70P–TOe (Ø 44 – 54)
50P–TOe (Ø 40 – 50)
70P–TOe (Ø 52 – 62)
70P–TOe (Ø 44 – 54)
m
[kg]
15,8
15,7
19,6
19,7
Order No.
X342X2 PM120
X342X2 PM150
X343X2 PM185
X343X2 PM240
Quotations for specific modifications as well as detailed technical information for type X.X1, X.X2 are available at [email protected].
Page:
8Type: Х.Х1, X.X2 PM
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21,22 DEP SHELL STAINLESS STEEL JUNCTION BOXES
Type of protection:
Boxes are equipped with venting gland M25, the number of cable gland entries
available remains unchanged.
Terminals
WEIDMÜLLER
40 pcs 2 × 4 mm2
22 pcs 2 × 4 mm2 (FE)
22 pcs 1 × 4 mm2 (РЕ)
WEIDMÜLLER
20 pcs 2 × 4 mm2
11 pcs 2 × 4 mm2 (FE)
12 pcs 1 × 4 mm2 (РЕ)
Dimensions
w × h × d [mm]
Entries for
cable glands*
Weight
Order No.
400 × 400 × 190
1 × Ø 25 mm
20 × Ø 20 mm
10,3 kg
X341Х2 DEPtyp1
300 × 400 × 190
1 × Ø 25 mm
10 × Ø 20 mm
8,1 kg
X340Х2 DEPtyp3
* type and amount of cable glands and plugs according to client’s specification
X340X2 DEPtyp3
ZONE 1, 2 – ZONE 21,22 DEP SHELL STAINLESS STEEL JUNCTION BOXES
STAINLESS STEEL BOXES TYPE X.X2/JB
II 2GD Ex ia tD IIC T6 T85°C IP66
Type of protection:
Boxes are equipped with venting gland M25, the number of cable gland
entries available remains unchanged.
Terminals
WEIDMÜLLER
40 pcs 2 × 4 mm2
22 pcs 2 × 4 mm2 (FE)
22 pcs 1 × 4 mm2 (РЕ)
WEIDMÜLLER
20 pcs 2 × 4 mm2
11 pcs 2 х 4 mm2 (FE)
12 pcs 1 × 4 mm2 (РЕ)
X341Х2/JB DEPtyp2
Dimensions
w × h × d [mm]
Entries for
cable glands*
Weight
400 × 400 × 190
1 × Ø 25 mm
20 × Ø 20 mm
10,3 kg X341Х2/JB DEPtyp2
300 × 400 × 190
1 × Ø 25 mm
10 × Ø 20 mm
8,1 kg
Order No.
X340Х2/JB DEPtyp4
* type and quantity of cable glands and plugs according to client´s specification
Quotations for specific modifications as well as detailed technical information for type X.X2 DEP SHELL are available at [email protected].
GENERI, s.r.o.
Type: X.X2 DEP SHELL
Page: 9
X.X0, X.X1, X.X2 JUNCTION BOXES - OVERVIEW ZONE 1,2 – ZONE 21, 22
Type of protection
Ambient
temperature*:
Material:
II 2GD Ex e tD II T6 T85°C IP65/66
-60°C up to +90°C
X.X0 – Aluminium alloy
X.X1 – Polyester
X.X2 – Stainless steel
Terminals:
2,5 up to 300 mm2
Cable glands:
please see page 37 of this catalogue
Un:
500V, 690V, 750V, 1000V
* Maximum range. Applies only for certain types.
TABLE OF THE MOST USED DIMENSION TYPES
ALUMINIUM ALLOY
Type
Dimensions
[mm]
X09X0
X10X0
X11X0
X16X0
X17X0
X18X0
X19X0
X21X0
X22X0
X23X0
X24X0
X25X0
X26X0
X27X0
X28X0
X29X0
X31X0
X32X0
X33X0
X35X0
X42X0
X43X0
X46X0
X47X0
X48X0
X49X0
X50X0
X51X0
X52X0
X53X0
X54X0
X55X0
X56X0
X57X0
X58X0
X59X0
X60X0
X70X0
64 × 58 × 34
64 × 98 × 34
64 × 150 × 34
80 × 75 × 57
80 × 125 × 57
80 × 175 × 57
80 × 250 × 57
120 × 122 × 80
120 × 220 × 80
120 × 220 × 90
122 × 360 × 80
160 × 160 × 90
160 × 260 × 90
160 × 360 × 90
160 × 560 × 90
230 × 200 × 110
230 × 280 × 110
230 × 330 × 110
230 × 400 × 110
230 × 600 × 110
310 × 400 × 110
310 × 600 × 110
100 × 100 × 80
100 × 160 × 80
100 × 200 × 80
120 × 122 × 90
140 × 140 × 90
140 × 200 × 90
180 × 180 × 100
180 × 280 × 100
100 × 230 × 110
230 × 200 × 180
230 × 330 × 180
230 × 400 × 224
310 × 400 × 180
310 × 400 × 226
310 × 600 × 180
600 × 600 × 200
POLYESTER
Type
Dimensions
[mm]
X12X1
X13X1
X14X1
X15X1
X20X1
X23X1
X25X1
X26X1
X27X1
X28X1
X37X1
X38X1
X39X1
X40X1
X44X1
X45X1
X71X1
X72X1
X73X1
X74X1
X75X1
X80X1
X365X1
75 × 80 × 55
75 × 110 × 55
75 × 160 × 55
75 × 190 × 55
120 × 122 × 90
120 × 220 × 90
160 × 160 × 90
160 × 260 × 90
160 × 360 × 90
160 × 560 × 90
250 × 255 × 120
250 × 255 × 160
250 × 400 × 120
250 × 400 × 160
360 × 360 × 90
405 × 400 × 120
250 × 600 × 120
80 × 75 × 75
110 × 75 × 75
160 × 75 × 75
190 × 75 × 75
400 × 405 × 165
400 × 600 × 250
STAINLESS STEEL
Type
Dimensions
[mm]
X05X2
X06X2
X320X2
X321X2
X322X2
X323X2
X324X2
X325X2
X326X2
X327X2
X328X2
X329X2
X330X2
X331X2
X332X2
X333X2
X334X2
X335X2
X340X2
X341X2
X342X2
X343X2
X344X2
X345X2
X346X2
X347X2
X349X2
X357X2
X397X2
X398X2
X407X2
X408X2
X409X2
X410X2
X411X2
X412X0
X413X0
302 × 402 × 188
Ø 133 × 80
150 × 150 × 90
200 × 150 × 90
200 × 200 × 90
300 × 150 × 90
300 × 200 × 90
300 × 300 × 90
300 × 400 × 90
400 × 200 × 90
400 × 400 × 90
560 × 400 × 90
300 × 200 × 150
300 × 300 × 150
300 × 400 × 150
400 × 200 × 150
400 × 400 × 150
560 × 400 × 150
300 × 400 × 190
400 × 400 × 190
560 × 400 × 190
800 × 400 × 190
500 × 300 × 150
500 × 400 × 150
330 × 200 × 150
330 × 300 × 150
400 × 300 × 90
400 × 300 × 150
400 × 560 × 90
400 × 560 × 150
400 × 300 × 190
330 × 200 × 190
330 × 300 × 190
400 × 560 × 190
400 × 800 × 190
500 × 300 × 190
500 × 400 × 190
STAINLESS STEEL
Type
Dimensions
[mm]
X414X2
X415X2
X416X2
X417X2
X430X2
X431X2
X432X2
X433X2
X434X2
X435X2
X436X2
X437X2
X438X2
X439X2
X440X2
X441X2
X442X2
X443X2
X444X2
X445X2
X446X2
X460X2
X461X2
X462X2
X463X2
X464X2
X465X2
X466X2
X467X2
X468X2
360 × 200 × 150
360 × 300 × 150
360 × 200 × 190
360 × 300 × 190
100 × 100 × 61
150 × 100 × 61
150 × 150 × 81
200 × 100 × 61
200 × 200 × 81
200 × 200 × 121
300 × 150 × 81
300 × 200 × 81
300 × 200 × 121
300 × 300 × 121
300 × 300 × 161
380 × 380 × 161
400 × 150 × 81
400 × 200 × 121
400 × 300 × 161
500 × 300 × 161
500 × 400 × 161
200 × 250 × 97
200 × 250 × 157
350 × 250 × 97
300 × 300 × 167
380 × 380 × 167
380 × 380 × 217
500 × 300 × 167
600 × 300 × 167
600 × 380 × 217
Dimensions are given by the required layout of the box i.e. amount of terminals, cable glands and current and voltage ratings. Based on that information we are able to
quote the optimal solution for you. Please contact our technical services department at [email protected].
Page: 10Type: Х.Х0, X.X1, X.X2
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21, 22 CENTRAL STOP BUTTON
DESIGN WITH PROTECTIVE GLASS CAP
Type of protection:
II 2GD Ex de tD IIC T85°C T6 IP65
Material, box dimensions:
Polyester, (w × h × d) 122 × 120 ×90 mm
Cable gland:
M20 (Ø 7 – Ø 12) mm
Terminals:
max. 2 × 2,5 mm2
Standard – head:
Latching, turn to release
Standard – text
CENTRAL STOP
Other types of heads, contacts or text on request
Contacts
Х20SA1 V001 ÷ V005
Weight
Order No.
1,36 kg
X20SA1 V001
1,36 kg
X20SA1 V002
1,39 kg
X20SA1 V003
1,39 kg
X20SA1 V004
1,39 kg
X20SA1 V005
Weight
Order No.*
0,89 kg
X20SA1 V006/??
0,89 kg
X20SA1 V007/??
0,92 kg
X20SA1 V008/??
0,92 kg
X20SA1 V009/??
0,92 kg
X20SA1 V010/??
STANDARD CENTRAL STOP
Contacts
X20SA1 V006 ÷ V010
* creating order number:
Text modifications:
CENTRAL STOP (standard)
EMERGENCY STOP
EMERGENCY SWITCHING OFF
Different texts on request.
??
–
ES
ESO
Example:
X20SA1 V006
X20SA1 V006/ES
X20SA1 V006/ESO
SPRING-LOADED PUSHBUTTON
ZONE 1, 2 – ZONE 21, 22
Type of protection:
Cable gland:
Terminals:
Different contact blocks on request
Contacts
X20SA1 V011 ÷ V015
* creating order number:
Colour code
?
Example:
BLACK
GREEN
WHITE
RED
YELLOW
B
G
W
R
Y
X20SA1 V011/B
X20SA1 V011/G
X20SA1 V011/W
X20SA1 V011/R
X20SA1 V011/Y
II 2GD Ex de tD IIC T6 T85°C IP65
Polyester, (w × h × d) 122 × 120 × 90 mm
M20 (Ø 7 – Ø 12) mm
max. 2 × 2,5 mm2
Weight
Order No.*
0,85 kg
X20SA1 V011/?
0,85 kg
X20SA1 V012/?
0,88 kg
X20SA1 V013/?
0,88 kg
X20SA1 V014/?
0,88 kg
X20SA1 V015/??
Quotations for specific modifications as well as detailed technical information are available at [email protected].
Components for boxes type X.SA1 are also on page 23 of this catalogue.
Type: X20SA1 V0..
GENERI,
s.r.o.
Page: 11
DOUBLE PUSHBUTTON SPRING RETURN ZONE 1,2 – ZONE 21, 22
Type of protection:
Cable glands:
Terminals:
Colour coding – example:
SB1 = red (R)
SB2 = green (G)
Colour
BLACK
GREEN
WHITE
RED
YELLOW
X20SA1 V017 / . / . ÷ X20SA1 V020 / . / .
X20SA1 V016/ . /., V017/ . /.
X20SA1 V018/ . / .
X20SA1 V017/ R / G
Code
B
G
W
R
Y
X20SA1 V019/ . /.
Substitute colour code for ?/?
Colour of the head
see table above
see table above
see table above
see table above
Double head layout
Button colour
Upper (SB2) = green
Lower (SB1) = red
Upper (SB2) = white
Lower (SB1) = black
X20SA1 V016 / . / .
II 2GD Ex de tD IIC T6 Т85°C IP65
Polyester, (w × h × d) 122 × 120 × 90 mm
M20 (Ø 7 – Ø 12) mm
max. 2 × 2,5 mm2
INDICATING LIGHT X20SA1 V020/ . /.
Weight
0,90 kg
0,90 kg
0,90 kg
0,96 kg
Order No.
X20SA1 V017/ ? / ?
X20SA1 V018/ ? / ?
X20SA1 V019/ ? / ?
X20SA1 V020/ ? / ?
Weight
Order No.
0,90 kg
X20SA1 V016/G/R
0,90 kg
X20SA1 V016/W/B
ZONE 1,2 – ZONE 21, 22
Type of protection:
Cable glands:
Terminals:
Indicator colour coding:
Creating order number – example:
Transparent
Colour
GREEN
TRANSPARENT
RED
YELLOW
BLUE
X20SA1 V021 ÷ V026
Nominal voltage
230 V 50 Hz
Order No.*
X20SA1 V021/ ?
Weight
0,85 kg
* substitute the colour code for question mark
120 V 50 Hz
X20SA1 V022/ ?
0,85 kg
48 V AC/DC
X20SA1 V023/ ?
0,85 kg
24 V AC/DC
X20SA1 V024/ ?
0,85 kg
II 2GD Ex emb tD II T6 Т85°C IP65
Polyester, (w × h × d) 122 × 120 × 90 mm
M20 (Ø 7 – Ø 12) mm
max. 2 × 2,5 mm2
X20SA1 V021/ T
Code
G
T
R
Y
BE
12 V AC/DC
X20SA1 V025/ ?
0,85 kg
6 V AC/DC
X20SA1 V026/ ?
0,85 kg
Other modifications on request. More details on X.SA1 box components can be found on page 23.
You can also contact us at [email protected] for further details.
Page: 12Type: Х20SA1 V0..
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21,22 PUSHBUTTON / INDICATOR
HL1
SB1
Type of protection:
II 2GD Ex demb tD IIC T6 IP65
Polyester, (w × h × d) 122 × 120 × 90 mm
Cable gland:
M20 (Ø 7 – Ø 12) mm
Terminals:
max. 2 × 2,5 mm2
Button / indicator colour specification:
Please substitute the colour code from page 11 for the question marks below
Nominal voltage
Order No.
Weight
230 V 50 Hz
X20SA1 V140/?/?
0,90 kg
24 V AC/DC
X20SA1 V141/?/?
0,90 kg
X20SA1 V140/./. ÷ V141/./.
ZONE 1, 2 – ZONE 21,22 TWO POSITION SWITCH / INDICATOR
HL1
SA1
X20SA1 V130/././.A ÷ V131/././.A
* Instead of ? substitute Ith of contact block 6 A or 16 A
Type of protection:
II 2GD Ex demb tD IIC T6 IP65
Polyester, (w × h × d) 122 × 120 × 90 mm
Cable gland:
M20 (Ø 7 – Ø 12) mm
Terminals:
max. 2 × 2,5 mm2
Button / indicator colour specification:
Nominal Voltage
Order No.*
Weight
230 V 50 Hz
X20SA1 V130/?/?/?A
0,91 kg
24 V AC/DC
X20SA1 V131/?/?/?A
0,91 kg
SA1
Position
Contact
3–4
On
ZONE 1, 2 – ZONE 21,22 TWO / THREE POSITION SWITCHES
Type of protection:
Polyester, (w × h × d) 122 × 120 × 90 mm
Cable glands:
M20 (Ø 7 – Ø 12) mm
Terminals:
max. 2 × 2,5 mm2
Specification Ith of contact blocks:
Ith = 6 A
X20SA1 V.../6 A
Ith = 16 A
X20SA1 V.../16 A
1 pole switch – „Coupling type 1“
Weight
Order No.
X20SA1 V027/?A
0,86 kg
Position
On
2 pole switch – „Coupling type 2“
Weight
Order No.
X20SA1 V028/?A
0,88 kg
Position
On
On
Variation switch – „Coupling type 6“
Weight
Order No.
X20SA1 V029/?A
0,89 kg
Position
On
On
X20SA1 V029/.A
Switch with 3 positions
Weight
Order No.
X20SA1 V030/?A
0,89 kg
Position
On
On
Switch with 3 positions for control of contactors
Self return from START to STOP position
Weight
Order No.
X20SA1 V031/?A
0,89 kg
Position
X20SA1 V030/.A
GENERI, s.r.o.
Type: X20SA1 V...
On
On
On
Page: 13
LOCKABLE SWITCH ZONE 1, 2 – ZONE 21, 22
Type of protection:
Cable glands:
Terminals:
X20SA1 V032/.A
Polyester, (w × h × d) 122 × 120 × 90 mm
M20 (Ø 7 – Ø 12) mm
max. 2 × 2,5 mm2
Weight
Order No.*
X20SA1 V032/?A
0,88 kg
Position
On
Locking in different positions, padlocks or mushroom heads on request
SERIES SWITCH – „SWITCH COUPLING 5“ ZONE 1, 2 – ZONE 21, 22
Type of protection:
Cable glands:
Terminals:
X20SA1 V033/.A
Polyester, (w × h × d) 122 × 120 × 90 mm
M20 (Ø 7 – Ø 12) mm
max. 2 × 2,5 mm2
Weight
Order No.*
SA1
SA2
X20SA1 V033/?A
0,91 kg
Position
SA1
Contact
3–4
On
DOUBLE PUSHBUTTON / INDICATOR ZONE 1, 2 – ZONE 21, 22
Type of protection:
Cable glands:
Terminals:
II 2GD Ex demb tD IIC T6 Т85°C IP65
Polyester, (w × h × d) 122 × 120 × 90 mm
M20 (Ø 7 – Ø 12) mm
max. 2 × 2,5 mm2
Indicator HL1
Button colour
230V 50Hz
green colour
230V 50Hz
green colour
24V AC/DC
green colour
24V AC/DC
green colour
right (SB2) – green
left (SB1) – white
left (SB1) – red
left (SB1) – white
left (SB1) – red
Weight
Order No.
0,98 kg
X20SA1 V101
0,98 kg
X20SA1 V102
0,98 kg
X20SA1 V103
0,90 kg
X20SA1 V104
X20SA1 V101 ÷ V104
TRIPLE PUSHBUTTON ZONE 1, 2 – ZONE 21, 22
Type of protection:
Cable glands:
Terminals:
Button colour
SB1, SB2 – green
SB3 – white
SB1, SB2 – green
SB3 – red
SB1, SB2 – black
SB3 – red
SB1, SB2 – black
SB3 – black
Polyester, (w × h × d) 122 × 120 ×90 mm
M20 (Ø 7 – Ø 12) mm
max. 2 × 2,5 mm2
Weight
Order No.
0,98 kg
X20SA1 V105
0,98 kg
X20SA1 V106
0,98 kg
X20SA1 V107
0,98 kg
X20SA1 V108
X20SA1 V105 ÷ V108
Other modifications and details about components used for the X.SA1 boxes can be found on page 23 of this catalogue and further details are also to be had at obchod@
generi.cz.
Page: 14Type: X20SA1 V...
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21,22 DOUBLE PUSHBUTTON / POSITION SWITCH
Type of protection:
II 2GD Ex de tD IIC T6 IP65
Polyester, (w × h × d) 122 × 120 × 90 mm
Cable gland:
M20 (Ø 7 – Ø 12) mm
Terminals:
max. 2 × 2,5 mm2
Buttons SB1/SB2 – colour specification:
Order No.
Weight
X20SA1 V120/?/?
1,02 kg
SA1
Position
0
Contacts
M
D
3–4
On
4* – 3*
On
X20SA1 V120/./.
ZONE 1, 2 – ZONE 21,22 EX POTENTIOMETER
Type:
Type of protection:
Cable glands:
Terminals:
X20SA1 RP. .
Potentiometer
Values
1 kΩ
2 kΩ
5 kΩ
10 kΩ
ZONE 1, 2 – ZONE 21,22 X20SA1 RP..
Polyester, (w × h × d) 122 × 120 × 90 mm
M20 (Ø 7 – Ø 12) mm
max. 2 × 2,5 mm2
Weight
Order No.
1,00 kg
1,00 kg
1,00 kg
1,00 kg
X20SA1 RP 1k
X20SA1 RP 2k
X20SA1 RP 5k
X20SA1 RP 10k
INDIRECT AMMETER
Type:
X20SA1 PA./..
Type of protection:
II 2GD Ex emb tD IIC T6 T85°C IP65
Polyester, (w × h × d) 122 × 120 × 90 mm
Cable glands:
M20 (Ø 7 – Ø 12) mm
Terminals:
max. 2 × 2,5 mm2
Indirect ammeter (designed for connection to measuring current
transformer) In/1A or In/5A
X20SA1 PA../..
Scale
Weight
range
0–10/30
1,00 kg
0–15/45
1,00 kg
0–20/60
1,00 kg
0–30/90
1,00 kg
0–40/120
1,00 kg
0–50/150
1,00 kg
0–60/180
1,00 kg
0–75/225
1,00 kg
0–100/300
1,00 kg
0–150/450
1,00 kg
0–200/600
1,00 kg
Note: Different ranges on request
Order No.
In/1A
In/5A
X20SA1 PA1A/10
X20SA1 PA5A/10
X20SA1 PA1A/15
X20SA1 PA5A/15
X20SA1 PA1A/20
X20SA1 PA5A/20
X20SA1 PA1A/30
X20SA1 PA5A/30
X20SA1 PA1A/40
X20SA1 PA5A/40
X20SA1 PA1A/50
X20SA1 PA5A/50
X20SA1 PA1A/60
X20SA1 PA5A/60
X20SA1 PA1A/75
X20SA1 PA5A/75
X20SA1 PA1A/100 X20SA1 PA5A/100
X20SA1 PA1A/150
X20SA1 PA5A/150
X20SA1 PA1A/200 X20SA1 PA5A/200
Other modifications on request. More details on X.SA1 box components can be found on page 23 of this catalogue and further details are also to be had
at [email protected].
GENERI, s.r.o.
Type: X20SA1 RP, PA
Page: 15
CONTROL BOX X23SA1 V2..
ZONE 1, 2 – ZONE 21, 22
Polyester control box Order No.
X23SA1 V202
Polyester control box Order No. (24V indicator)
X23SA1 V202/24
Type of protection:
II 2GD Ex demb tD IIC T6 T85°C IP65
Cable gland (bottom):
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,38 kg
X1
X1
HL1
HL2
SB1
SB2
1÷11: standard WAGO terminals 2 × 4 mm2, grey colour
PE: standard WAGO terminals 2 × 4 mm2, yellow-green
1 pc indicator head, 230V/AC, yellow colour, label : FAULT
1 pc indicator head, 230V/AC, green colour, label: OPERATION
1 pc indicator head, 0/1, white colour, label: STOP
1 pc indicator head, 1/0, green colour, label: START
X23SA1 V203
X23SA1 V203/24
Type of protection:
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,39 kg
X1
X1
HL1
SB1
SB2
SA1
1 pc button head, 0/1, colour white, label: STOP
1 pc button head, 1/0, colour green, label: START
1 pc 2 position switch head, 1/1, black colour, label: LOCAL - REMOTE
Other modifications on request. More details on X.SA1 box components can be found on page 23 of this catalogue and further details are also to be had at
[email protected].
Page: 16Type: X23SA1 V2..
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21,22
X23SA1 V204
Type of protection:
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,50 kg
X1
X1
PA1
SB1
SB2
1 pc indirect A-meter 0-x / 1A, triple overload capacity
1 pc button head, 0/1, white colour, label: STOP
1 pc button head, 1/0, green colour, label: START
X23SA1 V205
Type of protection:
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,55 kg
LABEL
STOP
START
W
G
COVER
CASE
LABEL
START
STOP
X1
X1
PA1
SB1
SB2
SA1
1÷11: standard WAGO terminals 2 × 4 mm , grey colour
W
2
G
COVER
CASE
[email protected].
GENERI, s.r.o.
Type: X23SA1 V2..
Page: 17
ZONE 1, 2 – ZONE 21, 22
X23SA1 V206
X23SA1 V206/24
Type of protection:
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,51 kg
X1
X1
HL1
HL2
SB1
SB2
SB3
SA1
1 pc indicator head, 230V/AC, white colour, label: CLOSED
1 pc indicator head, 230V/AC, white colour, label: OPENED
1 pc button head, 1/0, white colour, label: CLOSE
1 pc button head, 1/0, white colour, label: OPEN
1 pc button head, 0/1, black colour, label: STOP
X23SA1 V207
X23SA1 V207/24
Type of protection:
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,44 kg
LABEL
LABEL
X1
X1
HL1
HL2
SB1
SB2
SA1
1 pc indicator head, 230V/AC, yellow colour, label: FAULT
[email protected].
Page: 18Type: X23SA1 V2..
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21,22 CONTROL BOX X23SA1 V2..
X23SA1 V213
X23SA1 V213/24
Type of protection:
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,36 kg
X1
X1
HL1
SB1
SB2
SA1
1 pc 3-positions switch head, 2/0, black colour, label: LOCAL - 0 - REMOTE
X23SA1 V215
Type of protection:
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,52 kg
LABEL
STOP
START
W
G
COVER
CASE
LABEL
STOP
X1
X1
PA1
SB1
SB2
SA1
START
W
G
COVER
CASE
[email protected].
GENERI, s.r.o.
Type: X23SA1 V2..
Page: 19
ZONE 1, 2 – ZONE 21, 22
X23SA1 V216
X23SA1 V216/24
Type of protection:
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,48 kg
X1
X1
HL1
HL2 SB1
SB2
SB3
SA1
1 pc indicator head, 230V/AC, white colour, label: CLOSED
1 pc indicator head, 230V/AC, white colour, label: OPENED
1 pc button head, 1/0, white colour, label: CLOSE
1 pc button head, 1/0, white colour, label: OPEN
1 pc button head, 0/1, black colour, label: STOP
X23SA1 V217
X23SA1 V217/24
Type of protection:
1 pc M25 (Ø 8 – Ø 17) mm
(120 × 220 × 90) mm
Weight:
1,41 kg
LABEL
LABEL
X1
X1
HL1
HL2 SB1
SB2
SA1
1 pc indicator head, 230V/AC, yellow colour, label: FAULT
[email protected].
Page:
20Type: X23SA1 V2..
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21, 22 STANDARD JUNCTION AND SIGNALIZATION BOXES FOR HEATING CABLES
POLYESTER JUNCTION BOX - type X20X1
Type of protection:
Nominal voltage:
550 V
Dimensions:
122 × 120 × 90 mm
Box for self-limiting heating cable BSX, RSX, VSX, KSX, HTSX
Order No.
X20X1 TK1.1
X20X1 TK3
Optional accessories
• Junction box fixture
• Ex cable gland • Ex cable gland • Ex cable gland • Ex terminal • Terminal connector Terminals*
WAGO
X20X1 TK1.1 4 pcs 2 × 4 mm2
+ PE bar
Cable glands
Colour
1 pc М25 × 1,5(Ø 8 – Ø17) mm
1 pc BSX cable gland
2 pcs М25 × 1,5 plug
black
Box for power-limited heating cable HPT
SS - 110 / 210 install. equip. included
М25 × 1,5 (Ø 8 – Ø17) mm
М25 × 1,5 for HTSX, RSX cables
M25 × 1,5 for BSX, VSX-5 and 10
WAGO 2 × 4 mm2 grey
for WAGO terminals
Order No.
Terminals*
WAGO
X20X1 TK3 4 pcs 2 × 4 mm2
+ PE bar
Cable glands
Colour
2 pcs М25 × 1,5(Ø 8 – Ø 17) mm
black
* Terminals are interconnected into two pairs
POLYESTER JUNCTION BOX - type X20X1 with plastic fixture
Type of protection:
Nominal voltage:
550 V
Dimensions:
122 × 120 × 90 mm
Box for heating cables BSX, RSX, KSX, HTSX, VSX, HPT
Order No.*
Terminals**
WAGO
X20X1 TK2 4 pcs 2 × 4 mm2
+ PE bar
Cable glands
Colour
1 pc М25 × 1,5(Ø 8 – Ø 17) mm
1 pc М25 × 1,5 plug
each fixture has 3 cable entries
for heating cable
black/
brown
* Please note which type of cable the box is intended for
** Terminals interconnected into two pairs
• Ex cable gland • Ex terminal
• Connector М25 × 1,5 (Ø 8 – Ø 17) mm
for WAGO terminals
X20X1 TK2
POLYESTER INDICATOR BOX - type X20SA1 with plastic fixture
Type of protection:
Nominal voltage:
550 V
Dimensions:
122 × 120 × 90 mm
Includes cable functionality indication
Order No.*
Indication
Cable glands
Colour
X20SA1 TK4
1 pc green
indicator
230 V/ 50 Hz
each fixture has 3 cable entries
for heating cable
black/
brown
*
Please note which cable the box is intended for
X20SA1 TK4
• Ex cable gland М25 × 1,5 (Ø 8 – Ø 17) mm
GENERI, s.r.o.
Type: X20X1 TK., X20SA1 TK.
Page: 21
STANDARD JUNCTION AND SIGNALIZATION BOXES FOR HEATING CABLES ZONE 1, 2 – ZONE 21, 22
POLYESTER CONTROL AND INDICATION BOX - type X20SA1
Type of protection:
II 2GD Ex demb tD IIC T6 Т85°C IP65
Nominal voltage:
550 V
Dimensions:
122 × 120 × 90 mm
Box with on/off switching capability and indication of heating cable operation
Order
No.*
Layout
Cable glands
Colour
X20SA1
TK5.1/?A
1 pc green indicator
230V/50Hz
1 pc position
switch 230V/10A
1 pc М25 × 1,5 (Ø 8 – Ø 17) mm
1 pc cable gland for heating
cable
black
* Please note which cable the box is intended for.
WAGO mini terminals are used as standard for this box.
X20SA1 TK5.1/?A
• Junction box fixture • Ex cable gland
• Ex cable gland
• Ex cable gland
• Ex terminal SS - 110 / 210 install. equip. included
М25 × 1,5 (Ø 8 – Ø17) mm
М25 × 1,5 for HTSX, RSX cable
M25 × 1,5 for BSX, VSX-5 and 10
WAGO mini
STANDARD JUNCTION BOXES FOR HEATING CABLES NON-EX (INDUSTRIAL)
POLYESTER JUNCTION BOX - type L20X1
Type of protection:
IP66
Nominal voltage:
550 V
Dimensions:
122 × 120 × 90 mm
Box for cables type BSX, RSX, KSX, HTSX, VSX, HPT
Order No.
Terminals*
Cable glands
Colour
WAGO
1 pc М25 × 1,5 (Ø 9 – Ø 17) mm
4 pcs 2 × 4 mm2
1 pc cable gland for heating cables
+ PE bar
2 pcs plug М25 × 1,5
* Terminals interconnected into two pairs
L20X1 TK1L
grey
L20X1 TK1L
• Junction box fixture
• Cable gland
• Cable gland
• Cable gland
• Terminal • Connector SS - 110 / 210 install. equip. included
М25 × 1,5 (Ø 9 – Ø 17) mm
М25 × 1,5 for HTSX, RSX cables
М25 × 1,5 for BSX, VSX cables +М25 / М20 × 1,5
for WAGO terminals
ALUMINIUM JUNCTION BOX - type L21X0
Type of protection:
IP66
Nominal voltage:
550 V
Dimensions:
122 × 120 × 90 mm
Box for series resistance cable MIK
Order No.
Terminals*
Cable glands
Colour
L21X0 TK8L
WAGO
4 pcs 2 × 4 mm2
+ PE bar
1 pc М25 × 1,5(Ø 9 – Ø 17) mm
2 pcs entry with thread
М20 × 1,5
1 pc М25 × 1,5 plug
grey
L21X0 TK8L
• Cable gland • Terminal • Connector
М25 × 1,5 (Ø 9 – Ø 17) mm
for WAGO terminals
* Terminals interconnected into two pairs
Page:
22Type: X20SA1 TK., L20X1 TK., L21X0 TK.
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21,22 MAST FUSE BOX X26SA1 FU..A
Polyester mast fuse box X26SA1 FU..A
Type of protection:
II 2GD Ex emb II T6 Т85°C IP65
Fuse:
T characteristics, breaking capability 1500A
Cable glands (upper):
1 pc М20 (Ø 7 – Ø12) mm
Cable glands (lower):
2 pcs М32 (Ø 17 – Ø 25) mm
Dimensions
160 × 260 × 90 mm
(w × h × d):
Weight:
2,22 kg
Order No.
Х26SA1 FU16А
Х26SA1 FU12А
Х26SA1 FU10А
Х26SA1 FU06А
Х26SA1 FU04А
Х26SA1 FU02А
Nominal fuse current
16 А
12,5 А
10 А
6,3 А
4А
2А
FU1Ex fuse – T characteristics, breaking capability 1500A, GENERI
X1 N, 2L3, 1L3: standard WAGO terminals 2 × 4 mm2, grey colour
X1 N, 1L3, L2, L1: standard WAGO terminals 2 × 16 mm2, grey colour
X1 PE: standard WAGO terminal 2 × 4 mm2, yellow-green
X1 PE: standard WAGO terminal 2 × 16 mm2, yellow-green
2 pcs WAGO terminal connector
BOX
ZONE 1, 2 – ZONE 21, 22 Max. 2
contacts
per head
Separate
switch on / switch
off unit
CONTROL AND INDICATION BOXES - EX COMPONENTS
Flush-mounted
pushbutton
spring-loaded head
Flush-mounted
double
spring-loaded
pushbutton head
Mushroom head
„turn to release“
Rotary head
Lockable rotary
head
LED indicator
Electrical
connection
symbol
Specifications
Ith: 6 A*
AC 15: 240V 3A
DC 13: 250V 0,27 A
• Colour:
black, green
red, blue
• Colour:
green / red
• Colour:
black, red
• Colour:
black
• 2 positions,
3 positions
• Colour:
• Colour: red, blue,
black
white, green,
• 2 positions,
yellow
3 positions
• 6, 12, 24, 48V
• locking ability on
AC/DC
request
• 110,230 V AC
• 110,230 V AC/DC
* Deliveries with units rated Ith = 16 A also possible. Different contact blocks are available on request at [email protected].
Rotary head with more than two contact blocks is also available
NEW
Universal indicator 20 V – 415 V AC/DC is now available for use with indicating pushbuttons and
position switches along with the new contact blocks
20
10
A
30
40
•
•
•
Connection terminals - characteristics
• 4 × 4 mm2
• 2 × 4 mm2
• 500V, 22A
• 500V, 22A
A - meter
for connection to measuring current transformer (In/1A or In/5A)
double/ triple overload capacity, accuracy rating 1,5
standard scale ranges [A]: 0–10/30, 0–15/45, 0–20/60, 0–30/90, 0–40/120, 0–50/150, 0–60/180, 0–75/225, 0–100/300,
0–150/450, 0–200/600
GENERI, s.r.o.
Type: Х26SA1 FU..A, Ex components
Page: 23
CONTROL AND INDICATION BOXES - OVERVIEW ZONE 1, 2 – ZONE 21, 22
Type of protection
(depends on the
Ex components used)
II 2GD Ex e tD II T6,T5 T85°C, T100°C IP65
II 2GD Ex de tD IIС T6,T5 T85°C, T100°C IP65
II 2GD Ex emb tD II T6,T5 T85°C, T100°C IP65
II 2GD Ex demb tD IIС T6,T5 T85°C, T100°C IP65
-55°C to +80°C
Max. ambient temperature range:
Materials, designs, dimensions:
Boxes are designated by dimension type noted as a number before SA, number mentioned after SA
states the material of the box:
0 – Aluminium alloy
1 – Polyester
2 – Stainless steel
For cable glands please see page 37
TABLE OF THE MOST USED DIMENSION TYPES
Aluminium alloy
Type
Dimensions
[mm]
X16SA0
X17SA0
X18SA0
X19SA0
X21SA0
X22SA0
X23SA0
X24SA0
X25SA0
X26SA0
X27SA0
X28SA0
X29SA0
X31SA0
X32SA0
X33SA0
X35SA0
X42SA0
X43SA0
X46SA0
X47SA0
X48SA0
X49SA0
X50SA0
X51SA0
X52SA0
X53SA0
X54SA0
X55SA0
X56SA0
X57SA0
X58SA0
X59SA0
X60SA0
X70SA0
80 × 75 × 57
80 × 125 × 57
80 × 175 × 57
80 × 250 × 57
120 × 122 × 80
120 × 220 × 80
120 × 220 × 90
122 × 360 × 80
160 × 160 × 90
160 × 260 × 90
160 × 360 × 90
160 × 560 × 90
230 × 200 × 110
230 × 280 × 110
230 × 330 × 110
230 × 400 × 110
230 × 600 × 110
310 × 400 × 110
310 × 600 × 110
100 × 100 × 80
100 × 160 × 80
100 × 200 × 80
120 × 122 × 90
140 × 140 × 90
140 × 200 × 90
180 × 180 × 100
180 × 280 × 100
100 × 230 × 110
230 × 200 × 180
230 × 330 × 180
230 × 400 × 224
310 × 400 × 180
310 × 400 × 226
310 × 600 × 180
600 × 600 × 200
Polyester
Type
Dimensions
[mm]
X12SA1
X13SA1
X14SA1
X15SA1
X20SA1
X23SA1
X25SA1
X26SA1
X27SA1
X28SA1
X37SA1
X38SA1
X39SA1
X40SA1
X44SA1
X45SA1
X71SA1
X72SA1
X73SA1
X74SA1
X75SA1
X80SA1
X365SA1
75 × 80 × 55
75 × 110 × 55
75 × 160 × 55
75 × 190 × 55
120 × 122 × 90
120 × 220 × 90
160 × 160 × 90
160 × 260 × 90
160 × 360 × 90
160 × 560 × 90
250 × 255 × 120
250 × 255 × 160
250 × 400 × 120
250 × 400 × 160
360 × 360 × 90
405 × 400 × 120
250 × 600 × 120
80 × 75 × 75
110 × 75 × 75
160 × 75 × 75
190 × 75 × 75
400 × 405 × 165
400 × 600 × 250
Stainless steel
Type
Dimensions
[mm]
X05SA2
X06SA2
X320SA2
X321SA2
X322SA2
X323SA2
X324SA2
X325SA2
X326SA2
X327SA2
X328SA2
X329SA2
X330SA2
X331SA2
X332SA2
X333SA2
X334SA2
X335SA2
X340SA2
X341SA2
X342SA2
X343SA2
X344SA2
X345SA2
X346SA2
X347SA2
X349SA2
X357SA2
X397SA2
X398SA2
X407SA2
X408SA2
X409SA2
X410SA2
X411SA2
X412SA0
X413SA0
302 × 402 × 188
Ø 133 × 80
150 × 150 × 90
200 × 150 × 90
200 × 200 × 90
300 × 150 × 90
300 × 200 × 90
300 × 300 × 90
300 × 400 × 90
400 × 200 × 90
400 × 400 × 90
560 × 400 × 90
300 × 200 × 150
300 × 300 × 150
300 × 400 × 150
400 × 200 × 150
400 × 400 × 150
560 × 400 × 150
300 × 400 × 190
400 × 400 × 190
560 × 400 × 190
800 × 400 × 190
500 × 300 × 150
500 × 400 × 150
330 × 200 × 150
330 × 300 × 150
400 × 300 × 90
400 × 300 × 150
400 × 560 × 90
400 × 560 × 150
400 × 300 × 190
330 × 200 × 190
330 × 300 × 190
400 × 560 × 190
400 × 800 × 190
500 × 300 × 190
500 × 400 × 190
Stainless steel
Type
Dimensions
[mm]
X414SA2
X415SA2
X416SA2
X417SA2
X430SA2
X431SA2
X432SA2
X433SA2
X434SA2
X435SA2
X436SA2
X437SA2
X438SA2
X439SA2
X440SA2
X441SA2
X442SA2
X443SA2
X444SA2
X445SA2
X446SA2
X460SA2
X461SA2
X462SA2
X463SA2
X464SA2
X465SA2
X466SA2
X467SA2
X468SA2
360 × 200 × 150
360 × 300 × 150
360 × 200 × 190
360 × 300 × 190
100 × 100 × 61
150 × 100 × 61
150 × 150 × 81
200 × 100 × 61
200 × 200 × 81
200 × 200 × 121
300 × 150 × 81
300 × 200 × 81
300 × 200 × 121
300 × 300 × 121
300 × 300 × 161
380 × 380 × 161
400 × 150 × 81
400 × 200 × 121
400 × 300 × 161
500 × 300 × 161
500 × 400 × 161
200 × 250 × 97
200 × 250 × 157
350 × 250 × 97
300 × 300 × 167
380 × 380 × 167
380 × 380 × 217
500 × 300 × 167
600 × 300 × 167
600 × 380 × 217
Dimensions are given by the required layout of the box i.e. amount of terminals, cable glands and current and voltage ratings.
Based on that information we are able to quote the optimal solution for you. Please contact our technical services department at [email protected].
Page: 24Type: X.SA0, X.SA1, X.SA2
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21, 22 EX SURGE PROTECTIONS
Type X.FV./…
II 2GD Ex emb tD A21 II T6 T50°C –55°C ≤Ta≤ +70°C IP66
Type X.FV./…/JB
II 2GD Ex iamb tD A21 IIC T6 T50°C –55°C ≤Ta≤ +70°C IP66
Surge protections are standard delivery for ambient temperature –20°C ≤Ta≤ +40°C
Nominal voltage:
6 V DC
12 V DC
24 V DC
48 V DC
Residual voltage:
11 V DC
17 V DC
36 V DC
62 V DC
Protection against repeated surge:
Surge wave 8/20 μs 10 operations:
10 kА
Surge wave 10/100 μs 400 operations:
500 А
Short-circuit current for the duration of 1s:
30 А
Response time:
under 1 ns
Conductor cross-section available: 0,35 mm2 to 2,5 mm2
X12FV1/..1
Order number creation:
X . FV . / . . . / JB
Only for intrinsically safe
Number of protected lines:
1 1–module unit
2 2–module unit
3 3× 1–module unit
4 2× 2–module unit
Coupler:
R resistor (60 mА/1 MHz)
LA inductance 1 (370 mА/150 kHz)
LBinductance 2 (2 А/150 kHz)
Nominal voltage:
06 6 V DC
12 12 V DC
24 24 V DC
48 48 V DC
Material :
0 Al alloy
1 plastic (Polyester)
2 stainless steel sheet
FV: surge protection designation
(corresponds with EN 61346-1)
Dimension type:
All dimension types of boxes
mentioned on page 24 can be used
Х:
Designation of (Ex) explosion-proof protection
X14FV1/..2
Most common surge protections for one line
Nominal
Max. Frequency
Coupler
Order No.
voltage
current
limit
Resistor
60 mА
1МHz
X12FV1/24R1/JB*
Resistor
60 mА
1 МHz
X12FV1/24R1
80 × 75
Polyester
24 V
× 55
Inductance 1
370 mА
150 kHz
X12FV1/24LA1
Inductance 2
2А
150 kHz
X12FV1/24LB1
* /JB = intrinsically safe electrical circuits
Dimensions
Material
[mm]
Most common surge protections for two lines
Nominal
Max. Frequency
Coupler
Order No.
voltage
current
limit
Resistor
60 mА
1МHz
X14FV1/24R1/JB*
Resistor
60 mА
1 МHz
X14FV1/24R1
160 × 75
Polyester
24 V
× 55
Inductance 1
370 mА
150 kHz
X14FV1/24LA1
Inductance 2
2А
150 kHz
X14FV1/24LB1
* /JB = intrinsically safe electrical circuits
Dimensions
Material
[mm]
Example of connection of 1-module unit
Further details on request at [email protected].
GENERI, s.r.o.
Type: X.FV..
Page: 25
EX MOTORS ZONE 1,2
Explosion-proof stainless steel motor Х551М2
Type of protection:
II 2G Ex d IIB T6
IP68 h2m (20 kPa)
Ambient temperature:
–20°C to +40°C
Nominal voltage:
6, 12, 24, 48, 110 or 230 V AC/DC
(depends on the motor used)
Maximum power dissipation:
(of enclosure for T6
temperature class )
Standard design of Х551М2
Feeder cable connection:
Max. torque:
Enclosure material:
9,5 W – with rubber cable
(standard type H07 RN-F used)
17 W – cable with higher temperature
resistance
Motor type dependent
4 Nm
Stainless steel
Application:
The explosion-proof stainless steel motor serves as a source of rotational movement
in areas with danger of explosion of flammable gases and vapours (e.g. water-oil
separators, mixing machinery etc.).
Motor design:
The motor is designed as flameproof with direct entry. The equipment consists of a
flange secured to a stainless steel welded body equipped by a cable gland of certified type. The motor and its gearbox is fixed inside the enclosure offering IP 68 h2m
(20 kPa) protection. MAXON brand reliable high-rpm motors are used as standard.
Custom deliveries with different types of motors are also possible with respect to
dimensions and technical specification stated below.
The flexible feeder cable is an inseparable part of the delivery and is permanently
attached to the enclosure.
Motor installation:
Standard design:
The front side flange is fastened to the enclosure by four M6 screws with at least
20 mm length in 4 × 90° spacing on 112 mm diameter (see the figure below).
Customised design:
The flange design as well as the screw spacing can be adjusted according to custo
mer’s needs.
Application for water-oil separator
Further technical details on X551M2 explosion-proof motor are available at [email protected] .
Page: 26Type: X551M2
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21, 22 EX TRANSFORMER AND SOCKET BOXES
Socket box X.XS.
Type of protection:
IP range:
Material:
Outside finish:
Material:
X26XS1 (260 × 160 × 90) mm
Surface resistance:
Flammability:
Material:
* type dependent
II 2GD Ex demb tD IIC T6, T5 T79°C*
II 2GD Ex de tD IIC T6, T5 T79°C*
II 2GD Ex emb tD II T6, T5 T79°C*
IP66/65 *
–55°C to +60°C *
X.XS(T)0
Aluminium alloy, DIN 1725 (AlSi12)
Powder colour RAL 7001 grey
X.XS(T)1
Hardened polyester with glass fibres and graphite black colour,
RAL 9011 equivalent
< 109 Ω
hard to ignite, self-extinguishing, UL- S94.V- 0
(also halide free)
X.XS(T)2
Stainless steel 17 241 1,25mm thickness
Application:
The socket box X.XS. is designed for connecting electrical circuits and equipment under load in areas
with flammable atmosphere of gases and dusts. Moreover, the socket box X.XST. with XTO transformer*
enables you to connect equipment with low nominal voltage.
* GENERI manufactured
Design and installation:
Due to the requirements on the amounts of sockets and the circuitry connection, all the boxes are custom
made. Fusing of the sockets is provided by power distributor as standard, alternatively the boxes can be
fitted with Ex circuit-breakers or Ex fuses. Boxes equipped with transformer are always protected by Ex
fuses built-in directly inside the box. The socket box is available in several designs, portable with cable
and plug, plug mounted directly onto the box or fixed wall-mounted version. Live circuit indication is also
available.
X38XST1 (255 × 250 × 160) mm
Х . . XS .
Material of box:
0 – Aluminium alloy
1 – Polyester
2 – Stainless steel
XS – socket box designation
XST– socket box with transformer
dimension type
explosion-proof marking
Overview of the basic dimension types:
X331XST2 (300 × 400 × 190) mm
Type
X58XST0
X26XS1
X38XST1
X40XST1
X340XST2
Dimension [mm]
310 × 400 × 180
260 ×160 × 90
255 × 250 × 160
400 × 250 × 160
400 × 300 × 190
Max. amount of circuits
3 × 24V / 6,3А
1 × 400V / 32А + 1 × 400V / 16А
2 × 400V / 20А + 1 × 24V / 6,3А
1 × 400V / 63А + 1 × 400V / 32А + 1 × 24V / 10А
3 × 400V / 32А + 1 × 24V / 10А
Further technical details are available on request at [email protected].
GENERI, s.r.o.
Type:
X..XS(T).
Page: 27
EX PORTABLE LIGHTING KIT ZONE 1,2
Ex portable lighting kit XEL 230V/3×24V/3×150W
Type of protection: socket box
II 2GD Ex demb tD IIC T5 Т79°C
lights
II 2GD Ex de IIC T3
Power supply unit:
230 V 50 Hz TN–S
Nominal voltage:
3 × 24V 50Hz SELV
Power output:
3 × 150 W
–20°C to +40°C
Application:
Primary use of the lighting kit XEL 230V/3×24V/3×150W is in areas with danger of
explosion of flammable gases and vapours. You can use it to your advantage especially for lighting of confined conductive spaces (ČSN 33 2000-7-706) when working
in metal tanks and during cleaning operations or inspections.
Design:
The lifting kit is composed of two 50 m feeder cables with plug and latch, Ex-proof
socket box X58XST0, three portable, independently powered and protected floodlights 24V/150W and their feeder cable each measuring 15 m by standard. All the
cable lengths are possible to adjust if needed.
Fusing of the whole lighting kit is provided by connection to a power distributor in
non-Ex area – the system includes a combined current protector B 4 A/30 mA.
Block diagram
Other modifications and detailed technical information on XEL lifting kit are available on request at [email protected].
Page: 28Type: XEL
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21, 22 EXPLOSION-PROOF EXTENSION LEADS XSXP
NE
W
Application:
Explosion-proof extension leads are to be used for temporary connection of portable el. equipment in
spaces with the risk of explosion of combustible gases, vapours and dusts.
Design and installation:
The extension lead consists of a rubber cable H07RN-F terminated with an explosion-proof socket and
plug. In case the cable is wound up on a cable reel, the socket may be at the loose end of the cable or it may
be fitted to the front side of the reel. The reel may be a steel one or a plastic one with a metal frame.
Type key:
XSXP 015 10 - 50 B1 BNV
XSXP 01510-50 B1 BNV
5 – Plug execution: Ex = Ex execution
BNV = industrial execution
4 – Execution:
B1 = plastic drum2)
B2C = metal drum, socket on the cable
B2R = metal drum, socket on the drum
V = loose cable
3 – Cable length:
by requirement, max. 50m
2 – Nominal current1): 10 = 10A
16 = 16A
1 – Nominal voltage: 08A = 20-24V 2P
015 = 220-250V 1P+N+PE
013 = 380-440V 3P+PE
017 = 380-440V 3P+N+PE
Notes:
1)
Nominal current with fully unrolled cable.
2)
Plastic drum with a plug adapter. The drum to be used only for storing the extension lead and must not
be used in an explosive area!
Technical data:
Explosion-proof Extension Leads XSXP
Group and category:
II 2GD
Explosion-proof execution:
Ex de IIC T6 DIP A21 T70°C
IP66
-25°C to +40°C
Cable cross-section:
10 A – 1,5 mm2, 16 A – 2,5 mm2
GENERI, s.r.o.
Type:
XSXP
Page: 29
EXPLOSION-PROOF DISTILLATION APPARATUS RP..Ex ZONE 2
NE
W
Working conditions:
Explosive risk area:
Temperature class of gases and
vapours :
Explosive group of gases and
vapours:
Ingress protection with cover of
integrated el. instruments:
General data:
Process:
Working cycle:
Distilled liquids:
RP 25 Ex - front view
Heater:
Working volume:
Heater material :
Filling :
Removal of distillation residue:
zone 2 (category 3 equipment)
T1 to T3 (inflammation point >200°C)
IIA, IIB
-5°C ≤ Ta ≤ +40°C (only into interiors)
IP54
atmospheric or vacuum distillation,
max. underpressure –0,5 bar (for RP 70 Ex), and –0,95 bar (for RP 07,
12, 25 Ex, for RP 70 Ex only with adaptation of heater)
batch distillation
combustible and non-combustible liquids:
with atmosph. max. boiling point 170°C, inflammation point
above 200°C,
with vacuum distillation boiling point reduction by up to 90°C
7, 12, 25, 70 litres
17 240 (AISI 304) or 17 248 (AISI 321)
by pouring
by tipping
Application:
The distillation apparatus RP .. Ex is to be used for the recovery of organic solvents that have been
contaminated with various mechanical or chemical admixtures. The distillation separates the pure solvent
that may be used again for its original purpose. The advantage of this principle is acquisition of the
pure solvent whose properties are the same as they were when the solvent was used the first time. The
distillation cycle with the given volume of the solvent can be repeated limitlessly.
The apparatus can also be used in the opposite case when the product «in question» is the thickened
residue resulting from the distillation and the process removes its excessive dilution or unwanted fractions,
or it can be used for other technological purposes.
Outline of produced types RP .. Ex:
RP 25 Ex - back view
Working volume:
Distillation time:
Distillation capacity:
Installed capacity:
Dimensions:
Weight:
RP 07 Ex
7 litres
2 – 3 hours
4 – 4,5 lt/hour
1 200 W
60×60×90 cm
45 kg
RP 12 Ex
12 litres
3 – 4 hours
3,5 – 4,5 lt/hour
1 600 W
60×70×115 cm
60 kg
RP 25 Ex
25 litres
3 – 4 hours
10 – 15 lt/hour
2 250 W
60×75×120 cm
70 kg
RP 70 Ex
70 litres
3 – 4 hours
20 – 25 lt/hour
3 000 W
80×90×130 cm
95 kg
RP 25 Ex - control box type X103HM with inbuild
microcontroller
Page: 30Type: RP..Ex
GENERI, s.r.o.
NE
W
ZONE 1, 2 – ZONE 21, 22 ACTIVE LIQUID SEPARATOR
• To be used especially for separation of diesel oil (or for similar low viscosity substances) and
water
• Stainless-steel el. drive 24 V DC or a hydraulic drive
• High purity of the separated liquid
• To be used in long-term operation
DESCRIPTION:
In the course of a number of industrial processes oil products often get mixed with water by chance which
is undesirable. These substances are usually diesel oil, petrol and heating oils. Water contaminated this way
is difficult to clean, especially if the viscosity of the substances is little different from the viscosity of water.
For the purposes of separating the surface stains of these substances the “Active Liquid Separator“ was
constructed on the basis of a unique mechanical-pneumatic separation principle.
Active liquid separator with explosion-proof
el. drive, type X551M2, and a power box
for spaces without the risk of explosion,
types L620DA1 KOJA02
If water is contaminated and oil stains are forming on the surface, it is not recommended to pump the
liquid as the mixing process occurs again and it is necessary to separate both the layers carefully. The active
separator of non-mixable liquids uses advantageously the low viscosity of the contaminating substance
and little adhesion to the equipment surface. The design is based on a rotating disk, situated at an
angle, whose working side is provided with a double belt spiral forming the letter “G“. The centre of the
spiral is a hollow cylinder with a perforated wall serving as a shaft and a hydraulic bell at the same time.
Owing to their surface tension oil substances tend to form stains on as large an area as possible and their
thickness is as minimum as possible. The effort is to reduce the forming of this layer as much as possible by
collecting it actively from the water surface and concentrating it in a minimum space, and thus the height
must rise. Thus conditions for successful separation are created.
The film collection is provided by the spiral situated on the lower side of the disk; entering the water
surface at an angle, and while rotating, it traps a certain surface into a narrowing space which moves
towards the centre where it enters the hollow shaft. While rotating it will trap a certain amount of air that
will form a bubble. This will pass with the trapped liquid into the shaft hollow, and owing to its pressure
impulse and the effect of the lifting forces of water the liquid layer will be separated into the collection
space through the openings in the hollow shaft.
EXPLOSION-PROOF EXECUTION OF EL. DRIVE X551M2:
II 2 G (zone 1) Ex d IIB T6 IP68 h2m
The order involves the following:
• Power box of the el. drive, type L620DA1 KOJA02 (feeding input is a 1-phase plug 230 V / 50 Hz, output
is a socket 24 V DC for feeding the el. drive X551M2)
• Rubber cable (H07RN-F, length by agreement) leading from the el. drive which is ended with a plug to
be connected into the power box
Detail of unique collective disk with spiral
GENERI, s.r.o.
ACTIVE LIQUID SEPARATOR
Page: 31
SUSPENDED CONTROL STATIONS
ZONE 1, 2
Type of protection:
Box material:
Cable diameter:
Terminals:
Function
II 2G EEx ed IIC T6 IP65
Polyester
Ø 10 – Ø 22 mm
max. 2 × 2,5 mm2
Scheme for
each direction
b
[mm ]
b1
[mm ]
Weight
[ kg]
Order No.
409
220
0,94
XAW–P271
499
310
1,29
XAW–P471
Quotations for specific modifications as well as detailed technical information for type XAW-P are available on request at [email protected].
FLAMEPROOF CONTROL BOX
SNM, SNP – ZONE 1, 2 – ZONE 21, 22
Type of protection:
X201MSd:
I M2 Ex de I IP66
(SNM, SNP)
X201MSe:
(ZONE 1, 2 – ZONE 21, 22)
–20°C to +60°C (stand.–20°C to +40°C)
Box material:
Cast iron
Cable glands:
X201MSe: 1 × P21 (Ø 12–18 mm) no clamping module
(standard)
1 × plug P21
X201MSd: 1 × P21 STMd 14 (Ø 12–14 mm)
1 × plug P21
Terminals:
4 mm2
El. parameters:
Pushbutton:
Switch:
Ithe = 20A АС 3:
Ithe = 10А АС 15:
230V/50 Hz – 7A
3 × 400V/50 Hz – 7,5kW
400V/50 Hz – 5A
3 × 500V/50 Hz – 7,5kW
500V/50 Hz – 3A
DC: The switching capacity can be increased by coupling
of the contacts in series
Please consult us for the optimal solution for your application
Type
X201MSd
X201MSe
Weight
7 kg
7 kg
Order No.
X201MSd / ??
X201MSe / ??
Instead of ?? enter data from the table below
Rotary switch
3 – pole switch off „coupling type 3“
Three-way switch „coupling type 6“
Cross switch „coupling type 7“
3 – switching positions two-pole (I – 0 – II)
3 – switching positions as double pushbutton for circuit-breakers control (STOP – > O < – START)
Padlock at limit positions
?? (data after slash)
203A20
211A20
212A20
222A20
224A20
…A20z
Mushroom-head pushbutton „push - draw“ with contacts:
1 × NO (1/0)
1 × NC (0/1)
NO + NC (1/1)
2 × NC (0/2)
2 × NO (2/0)
?? (data after slash)
006A10
007A10
008A10
009A10
010A10
Quotations for specific modifications as well as detailed technical information for type X201MS are available on request at [email protected].
Type:
XAW; X201MS.
Page:
32
GENERI, s.r.o.
ZONE 1,2 – ZONE 22
X103HM – CONTROL, SIGNALLING AND DISTRIBUTION - FLAMEPROOF ENCLOSURE
Type of protection:
Box material:
Note:
Dimensional drawing:
Max. heat loss allowed on
the enclosure Ex „d“:
II 2G/3D Ex de tD IIB T6 T78°C IP54
–20°C to +55°C (stand. –20°C to +40°C)
Aluminium alloy
Outdoor application of X103HM requires
the use of a special shelter
70W
Motor starter – example of application
Order No.: X103HM, wiring diagram No. 960326/5:
Detailed technical information for type X103HM available at [email protected].
SNM, SNP – ZONE 1, 2 – ZONE 21, 22
FLAMEPROOF ENCLOSURES X40..DA2
X40..DA2 – with indirect entry into flameproof enclosure
Type of protection:
IM2 Ex de I IP65/66
(SNM, SNP)
II 2GD Ex de IIC T6 T85°C IP 65/66
(ZONE 1,2 – ZONE 21, 22)
Max. ambient temperature: –60°C to +60°C (stand.–20°C to +40°C)
Box material:
steel 11 373
Distributors are equipped according to client’s requirements. If delivered as an empty box, it is necessary
to approve of the final product for certification purposes.
X40..DA2
enclosure with indirect entry into
flameproof enclosure
X40..DA2/d – with direct entry into flameproof enclosure
II 3G*/2D Ex d IIB T6* T85°C IP 66
Type of protection:
(ZONE 2*, ZONE 21, 22)
Distributors X40..DA2/d do not have an intermediary junction box on the bottom. The Ex-rating changes
as below:
* Valid when using of Ex “d” cable glands with elastomer gland. If you use e.g. filled cable glands in
Ex d IIC design, the Ex-marking will change to II 2GD (zone 1, 2, zone 21, 22) Ex d IIC T6 (see EN 60 079-14
or instruction manual from manufacturer).
Box dimensions (A × A × H), C, D are the same like for X40..DA2 type– see table below.
Distributor
order No.
Detailed technical information on X..DA2 flameproof
distributors available on request at [email protected].
X4011DA2
X4021DA2
X4031DA2
X4041DA2
X4052DA2
X4062DA2
X4072DA2
X4084DA2
X4095DA2
* Different dimensions on request
A
[mm]
160
230
260
280
330
360
400
500
560
GENERI, s.r.o.
Type: X103HM, X40..DA2
B
[mm]
320
430
420
510
560
520
650
800
720
Dimensions*
C
[mm]
240
310
340
360
420
450
490
610
670
H
[mm]
125
125
125
125
165
165
165
265
325
D
[mm]
183
183
183
183
228
228
228
337
397
Page: 33
X450DA2, X450DA2/d – SWITCHGEAR BOXES
SNM, SNP, ZONE 1, 2 – ZONE 22
X450DA2 – with indirect entry to flameproof enclosure
Type of protection:
I M2 Ex de I IP54 ( SNM, SNP )
II 2G3D Ex de tD IIB T6 T85°C IP54
(zone 1, 2, zone 22)
Max. ambient temperature:
–20°C to + 40°C
Material of box:
steel 11373
Surface finish:
powder stove colour (standard yellow
RAL 1018)
Max. power losses
50 W equipment part Ex „d“
for temperature class T6:
20 W terminal block part Ex „e“
External PE:
1 × 16 mm2
Weight:
11 kg – empty box without inner equipment
Х450DA2 – switchgear box
X450DA2/d – with direct entry to the flameproof enclosure and with the
sight glass
Type of protection:
I M2 Ex d I IP54 ( SNM, SNP )
II 2G3D Ex d IIB T6 T85°C IP54
(zone 1, 2, zone 22)
certified as Ex component
Max. ambient temperature:
–20°C to + 40°C
Material of box:
steel 11373
Surface finish:
powder stove colour (standard yellow
RAL 1018)
Max. power losses
50 W
For temperature class T6:
External PE:
1 × 16 mm2
Weight:
10 kg – empty box without inner equipment
Inside diameter of sight glass:
Ø 125 mm
Application:
The switchgear boxes X450DA2 and X450DA2/d are mainly determined for
installation in the underground mines with the presence of the methane and
in the heavy duty with danger of explosion inflammable gas, vapours, dusts and
explosives – chemical industry, paintshops, gas industry, arms factories, etc.
Design:
The switchgear boxes type X450DA2 are delivered with inner equipment according
the requirement of client. The switchgear boxes type X450DA2/d differs from
the type X450DA2 in that it does not have trunking unit (= direct entry to the
flameproof enclosure ) and in the cover have placed sight glass with inside diameter
Ø 125 mm.
The boxes X450DA2/d are certified as Ex components. At application of this box is
necessary to make examination of conformity of final product.
X450DA2/d – switchgear box with sight glass
Type:
Page: 34
X450DA2, X450DA2/d
GENERI, s.r.o.
ZONE 1,2 – ZONE 21, 22 LIMIT SWITCHES
LIMIT SWITCHES TYPE XCW….
Type of protection:
II 2GD EEx d IIC T6 IP66/67 T85°C
Material:
Zinc-aluminium alloy
Description:
Limit switch with fixed 5-wire cable, each wire 0,75 mm2, outside cable diameter 7 mm, delivered in the following lengths 1m, 2m, 5m
10m
Order No.
Description
Fixed on body
Fixed on head
XCW–A110
XCW–F110
Steel end plunger
XCW–A102
XCW–F102
Steel roller plunger for
lateral cam approach
XCW–A103
XCW–F103
Steel roller plunger for
traverse cam approach
XCW–A115
XCW–F115
Thermoplastic roller
lever, rotary operation
Contact function
closed
open
Roller lever (accessories – assembled by the client)
XCW–Z24
Roller lever
LIMIT SWITCHES TYPE XC8…
Type of protection:
II 2GD EEx d IIC T6 IP65/66 T85°C
Material:
Cast-iron
Description:
Limit switch is fastened by M20 (Nickel platted brass) cable gland and it is possible to connect both armoured and unarmoured cables,
sealing ring for ranges from Ø 3 mm – Ø 15 mm. For armoured cables – cable glands on request.
Order No.
For non narmoured cable
For armoured cable
with clamping module
Description
XC8–JC161P11 I C
XC8–JC161P14 I
Steel plunger
XC8–JC162Р11 I C
XC8–JC162Р14 I
Roller plunger
XC8–JC163Р11 I C
XC8–JC163Р14 I
Side plunger
XC8–ТА1Р11 I C
XC8–ТА1Р14 I
Heavy duty
roller plunger
XC8–JC10111P11 I C
Actuation from left and
right
XC8–JC10511Р11 I C
Actuation from left or
right
XC8–JC10131P11 I C
right
XC8–JC10531P11 I C
right
XC8–JC10151P11 I C
right
XC8–JC10551P11 I C
right
XC8–JC10111P14 I
right
XC8–JC10511Р14 I
right
XC8–JC10131P14 I
right
XC8–JC10531P14 I
right
XC8–JC10151P14 I
right
XC8–JC10551P14 I
right
Contact function
closed
open
Delrin roller lever
Variable length
Delrin roller plunger
Steel rod 3mm
length 125 mm
Junction boxes for connection of limit switches XCW – see page 6. Further information available on request at [email protected].
GENERI, s.r.o.
Type:
XCW...., XC8...
Page: 35
EX MAGNETIC, INDUCTIVE AND CAPACITIVE SENSORS ZONE 1,2 – ZONE 21, 22
ATEX certificate for ZONE 0 & 1 & 2 (magnetic) and for ZONE 20 (capacitive)
Magnetic sensors EEx “m” (ZONE 1 & 2) and capacitive sensors (ZONE 20) ARE NOT INTRISICALLY SAFE:
• possibility of powering from any source with prescribed fusing
• easy designing and installation
• significant purchase cost reduction
Delivered with built-in cable
FSQ, FSJ – cylindrical Ø 16
Type of protection:
IP protection: IP 67
NO – Normally Open
Dimensions:
FSQ, FSJ – cylindrical Ø 16
Material of the body:
FSW – cylindrical M12
Type of protection:
FSW – cylindrical М12
ILM – floating
MW, MQ, MJ – rectangular
Dimensions:
Magnetic proximity sensor
ZONE 1 & 2
II 2G EEx m IIC T6
230 V АС, 3 А, 100 VA
ZONE 0
II 1G EEx ia IIC T6
Ui: 10,9 V, Ii: 15mA, Pi: 41mW, Li:<2μH, Ci:<40pF
–20°C ≤ Ta ≤ +60°C
Working distance:
17 mm or 42 mm
М12 × 1 L=56 mm, silicon cable L=2 m, 2 × 0,75 mm2
Stainless steel AISI 303
ILM – floating
Type of protection:
Magnetic floater
ZONE 1 & 2
II 2G EEx m II T5
ZONE 0
II 1G EEx ia IIC T6
IP protection: IP 68 (on cable exit)
Dimensions:
СO: Closed/Open position switching
spherical Ø 50 mm or cylindrical Ø 45 × 55 mm, PVC/silicon cable L=2 m
MW, MQ, MJ – rectangular
Type of protection:
ZONE 1 & 2
II 2G EEx m II T5
ZONE 0
II 1G EEx ia IIC T6
100/150/230V АС, 0,25/0,5/0,75 А type dependent
Ui: 10,9 V, Ii: 15mA, Pi: 41mW
–20°C ≤ Ta ≤ +60°C
Working distance:
5 mm ÷ 54 mm – type dependent
NO/NC/CO – Normally Open/
Closed, CO Switching
Dimensions:
СВ32 – cylindrical Ø 32
Type of protection:
СO – Switching between Closed/
Open states
Dimensions:
СВ32 – cylindrical Ø 32
ZONE 1 & 2
II 2G EEx m II T6
230 V АС, 3 А, 100 VA
ZONE 0
II 1G EEx ia IIC T6
Ui: 10,9 V, Ii: 15mA, Pi: 41mW, Li:<2μH, Ci:<40pF
–20°C ≤ Ta ≤ +60°C
Working distance:
8 mm or 30 mm
Ø 16 × 110 mm, silicon cable in protective metal neck L=2 m, 2 × 0,75 mm2
Ø 16 × 100 mm, cable PUR HF L=2m, 2 × 0,75 mm2
NO: 230 V АС, 3 А, 100 VA СO: 230V АС, 1 А, 60 VА
Ui: 10,9 V, Ii: 15mA, Pi: 41mW,
NO: Li:<2μH, Ci:<40pF CO: Li: <4μH, Ci: <350pF
–20°C ≤ Ta ≤ +60°C
23,5 × 14 × 6,1 mm 37 × 16 × 8,3 mm 79 × 21,2 × 11,5 mm, PVC cable L=2 m Ø 4 mm2
Plastic
Capacitive proximity sensor (fluids, granules, ...)
ZONE 20 & 21 & 22
II 1D T85°C
24V АC/DC, 120V AC, 230 V АС type dependent
–20°C ≤ Ta ≤ +60°C
adjustable sensitivity
4÷20 mm
time delay
1 s÷10 min. certain types only
Ø 32 mm, installed into P36 resp. M40 cable glands
PVC cable L= 2 m / 5 m / 10 m – customer specified
Polyester
Detailed technical information on magnetic, inductive and capacitive sensor and catalogue lists are available on request at [email protected].
Page: 36Type: Magnetic and capacitive sensors
GENERI, s.r.o.
ZONE 1,2 CABLE GLANDS AND PLUGS
POLYAMID CABLE GLANDS
Type of protection:
II 2G EEx e II
Ø [mm]
L1
Key
Thread
cable [mm]
size
M12 × 1,5 3,5–6,5
8
15 mm
M16 × 1,5
5–8
8
19 mm
M20 × 1,5
7–12
9
24 mm
M25 × 1,5
12–18
11
33 mm
M32 × 1,5
17–25
11
42 mm
M40 × 1,5 21–32
13
53 mm
M50 × 1,5 24–37
13
60 mm
M63 × 1,5 30–44
14
65 mm
IP65
Type
V – TEC Ex M12 × 1,5
V – TEC Ex M16 × 1,5
V – TEC Ex M20 × 1,5
V – TEC Ex M25 × 1,5
V – TEC Ex M32 × 1,5
V – TEC Ex M40 × 1,5
V – TEC Ex M50 × 1,5
V – TEC Ex M63 × 1,5
CABLE GLANDS WITH CLAMPING MODULE
Type of protection:
II 2G EEx e II
Ø [mm]
GL
Thread
Key size
cable [mm]
M16 × 1,5
4–8
15
19 mm
M20 × 1,5
6–12
15
24 mm
M25 × 1,5
13–18
11
33 mm
M32 × 1,5 18–25
11
42 mm
M40 × 1,5 22–32
13
53 mm
M50 × 1,5 32–33
13
60 mm
M63 × 1,5 37–44
14
65/68
Weight
kg/100 pcs
0,36
0,63
1,00
2,35
3,90
7,50
9,20
9,46
Order No.
2050 30 7
2050 31 5
2050 32 3
2050 33 1
2050 35 8
2050 36 6
2050 37 4
2050 38 2
IP 68
Material: polyamide/aluminium
Type
Order No.
HSK – K – MZ – Ex
1.215.1601.50
1.215.2001.50
1.215.2501.50
1.215.3201.50
1.215.4001.50
1.215.5001.50
1.215.6301.50
BLUE POLYAMID CABLE GLANDS (for intrinsical safety)
II 2G EEx e II
Type of protection:
Ø [mm]
GL
Thread
Key size
Type
cable [mm]
M12 × 1,5
3–6,5
8
15 mm
HSK – K – Ex
M16 × 1,5
4–8
8
19 mm
HSK – K – Ex
M16 × 1,5
5–10
8
22 mm
HSK – K – Ex
M20 × 1,5 6,5–12
9
24 mm
HSK – K – Ex
M20 × 1,5 10–14
9
27 mm
HSK – K – Ex
M25 × 1,5
13–18
11
33 mm
HSK – K – Ex
M32 × 1,5 18–25
11
42 mm
HSK – K – Ex
M40 × 1,5 22–32
13
53 mm
HSK – K – Ex
M50 × 1,5 32–38
13
60 mm
HSK – K – Ex
M63 × 1,5 37–44
14
65/68
HSK – K – Ex
IP 68
Order No.
1.291.1202.50
1.291.1602.50
1.295.1602.50
1.291.2002.50
1.295.2002.50
1.291.2502.50
1.291.3202.50
1.291.4002.50
1.291.5002.50
1.291.6302.50
EXPLOSION PROOF POLYAMID PLUGS
Type of protection:
II 2GD EEx e II IP68
Plugs intended for
threaded cable gland entries
Thread
M
M16
M20
M25
M32
M40
M50
M63
Order No.
191167
191207
191257
191327
191407
191507
191637
Thread
Pg
Pg7
Pg9
Pg11
Pg13,5
Pg16
Pg21
Pg29
Pg36
Pg42
Order No.
190777
190977
191177
191377
191677
192177
192977
193677
194277
Type of protection:
II 2GD EEx e II
Plugs put into cable glands
(instead of cable)*
Diameter
d
Order No.
[mm]
6,3
HSK – V – Ex 7
7,8
HSK – V – Ex 9
9,8
HSK – V – Ex 11
11,8
HSK – V – Ex 13,5
13,8
HSK – V – Ex 16
17,8
HSK – V – Ex 21
25
HSK – V – Ex 29
32
HSK – V – Ex 36
38
HSK – V – Ex 42
44
HSK – V – Ex 48
Note*
for PA
cable
glands
M12
M16
M16
M20
M20
M25
M32
M40
M50
M63
* only for polyamide cable glands
Quotations for specific modifications are available on request at [email protected].
GENERI, s.r.o.
Type:
Cable glands, plugs
Page: 37
NICKEL PLATED BRASS CABLE GLANDS ZONE 1,2 – ZONE 21, 22
Type of protection: II 2GD Ex d IIC ЕЕх e II IP66, IP67
Material:
Nickel platted brass
Type 501/421
Type 501/421 – for unarmoured cables
Order No.
Ø cable [mm]
501/421/2K/M16 B.N.P.
3–8
501/421/OS/M20 B.N.P.
3–8
501/421/O/M20 B.N.P.
7,5 – 11,9
501/421/A/M20 B.N.P.
11 – 14,3
501/421/B/M25 B.N.P.
13 – 20,2
501/421/C/M32 B.N.P.
19 – 26,5
501/421/C2/M40 B.N.P.
25 – 32,5
501/421/D/M50 B.N.P.
31,5 – 44,4/42,3
501/421/E/M63 B.N.P.
42,5 – 56,3/54,3
501/421/F/M75 B.N.P.
54,5 – 68,2/65,3
501/421/G/M80 B.N.P.
67 – 73
501/421/H/M90 B.N.P.
67 – 77,6
Type 501/423 – for unarmoured cables
Order No.
Ø cable [mm]
501/423/OS/M20 B.N.P.
3–8
501/423/O/M20 B.N.P.
7,5 – 11,9
501/423/A/M20 B.N.P.
11 – 14,3
501/423/B/M25 B.N.P.
13 – 20,2
501/423/C/M32 B.N.P.
19 – 26,5
501/423/C2/M40 B.N.P.
25 – 32,5
501/423/D/M50 B.N.P.
31,5 – 44,4/42,3
501/423/E/M63 B.N.P.
42,5 – 56,3/54,3
501/423/F/M75 B.N.P.
54,5 – 68,2/65,3
Type ICG 623 – Sealing for unarmoured cables
Order No.
Ø cable [mm]
ICG 623/OS/M20 B.N.P.
3–8
ICG 623/O/M20 B.N.P.
7,5 – 11,9
ICG 623/A/M20 B.N.P.
11 – 14,3
ICG 623/B/M25 B.N.P.
13 – 20,2
ICG 623/C/M32 B.N.P.
19 – 26,5
ICG 623/C2/M40 B.N.P.
25 – 32,5
ICG 623/D/M50 B.N.P.
31,5 – 44,4
ICG 623/E/M63 B.N.P.
42,5 – 56,3
ICG 623/F/M75 B.N.P.
54,5 – 68,2
Order No.
501/453/UNIV/OS/M20 B.N.P.
501/453/UNIV/O/M20 B.N.P.
501/453/UNIV/A/M20 B.N.P.
501/453/UNIV/B/M25 B.N.P.
501/453/UNIV/C/M32 B.N.P.
501/453/UNIV/C2/M40 B.N.P.
Order No.
501/453/RAC/OS/M20 B.N.P.
501/453/RAC/O/M20 B.N.P.
501/453/RAC/A/M20 B.N.P.
501/453/RAC/B/M25 B.N.P.
501/453/RAC/C/M32 B.N.P.
501/453/RAC/C2/M40 B.N.P.
Type 501/423
Type ICG 623
Type 501/453/UNIV
Type 501/453/RAC
ACCESSORIES AVAILABLE
Plugs 475 and
477 Ех d
Nut
Plugs 387 Ex e
Earth tag
Nylon sealing
washer
Fibre sealing
washer
Stainless steel
serrated
washer
cable in Ø
[mm]
3 – 8,1
6,5 – 11,9
8,4 – 14,3
11,1 – 20,2
17,6 – 26,5
23,1 – 32,5
Type 501/453/UNIV – for armoured cables
cable out Ø
Order No.
[mm]
5,5 – 12
501/453/UNIV/D/M50 B.N.P.
9,5 – 16
501/453/UNIV/E/M63 B.N.P.
12,5 – 20,5
501/453/UNIV/F/M75 B.N.P.
16,9 – 26
501/453/UNIV/G/M80 B.N.P.
22 – 33
501/453/UNIV/H/M90 B.N.P.
28 – 41
cable in Ø
[mm]
28,9 – 44,4/42,3
39,9 – 56,3/54,3
50,5 – 68,2/65,3
67 – 73
67 – 77,6
cable out Ø
[mm]
36 – 52,6
46 – 65,3
57 – 78
75 – 89,5
75 – 89,5
cable in Ø
[mm]
3–8
7,5 – 11,9
11 – 14,3
13 – 20,2
19 – 26,5
25 – 32,5
Type 501/453/RAC – for armoured cables
cable out Ø
Order No.
[mm]
5,5 – 12
501/453/RAC/D/M50 B.N.P.
9,5 – 16
501/453/RAC/E/M63 B.N.P.
12,5 – 20,5
501/453/RAC/F/M75 B.N.P.
16,9 – 26
501/453/RAC/G/M80 B.N.P.
22 – 33
501/453/RAC/H/M90 B.N.P.
28 – 41
cable in Ø
[mm]
31,5 – 44,4/42,3
42,5 – 56,3/54,3
54,5 – 68,2/65,3
67 – 73
67 – 77,6
cable out Ø
[mm]
36 – 52,6
46 – 65,3
57 – 78
75 – 89,5
75 – 89,5
Other modifications and technical data on brass cable glands available on request at [email protected].
Page: 38Type: Cable glands, plugs GENERI, s.r.o.
ZONE 1,2 – ZONE 21, 22 – SNM 1, 2 CABLE GLANDS FOR MINING, REDUCTIONS
Type of protection:
cable Ø
[mm]
8 – 18
16 – 26
24 – 34
32 – 42
40 – 50
44 – 54
52 – 62
60 – 70
FLANGED CABLE GLANDS AND COVERS TYPE 50P..., 70P...
IM2 / II 2GD Ex e tD I/II IP65 (always with rubber gasket)
I M2 / II 2G/3D Ex d tD I/IIB IP54 (always without gasket)
Cable glands with stirrup
Ex e I/II
Ex d I/IIB
–
–
50P – T0e34
50P – T0e42
50P – T0e50
70P – T0e54
70P – T0e62
70P – T0e70
–
–
50P – T0d34
50P – T0d42
50P – T0d50
70P – T0d54
70P – T0d62
70P – T0d70
Order No.
Armoured cable (glands without stirrup)
armoured
Ex e I/II
Ex d I/IIB
cable Ø
30 mm
50P – P0e18
50P – P0d18
40 mm
50P – P0e26
50P – P0d26
50 mm
50P – P0e34
50P – P0d34
65 mm
50P – P0e42
50P – P0d42
65 mm
50P – P0e50
50P – P0d50
–
–
–
–
–
–
–
–
–
COVERS FOR FLANGED CABLE GLANDS
Type of protection:
Order No.1)
70P–V0e
IM2/II 2GD Ex e tD I/II IP65 (always with rubber gasket)
70P–V0d
I M2/II 2G/3D Ex d tD I/IIB IP54 (always without gasket)
1)
universal size suitable for all types of cable glands mentioned above
Type of protection: CABLE GLANDS TYPE „S“ – SCREW
I M2 / II 2GD Ex d tD I/IIC -60°C ≤Ta≤+115°C IP68 10bar
I M2 / II 2GD Ex e tD I/II -60°C ≤Ta≤+115°C IP68 10bar
Specification (Order No.)
(sample of screwed cable gland M25×1,5 with stirrup, brass, intended for flameproof design „d”
for cable dia. Ø 6 – Ø 8 mm)
М25 × 1,5 S T M d 8
Diameter of cable (mm)
8 – for cable Ø 6 – Ø 8
10 – for cable Ø 8 – Ø 10
12 – for cable Ø 10 – Ø 12
14 – for cable Ø 12 – Ø 14
Type of protection
d – flameproof enclosure Ex „d“ or increased safety Еx „e“
е – only increased safety Еx „e“
Material of cable glands
M – nickel plated brass
O – nickel plated steel
N – stainless steel
Design of cable glands
T – glands with stirrup
Type of cable gland “S”
Type and dimension of thread A
M – metric thread
G – straight pipe thread
R – taper pipe thread
P (PG) – armoured for electrotechnics
NPT – taper thread according to ANSI standards
ADAPTERS AND REDUCTION SCREWS AND PLUGS
Type of protection:
I M2 / II 2GD Ex d tD I/IIC / Ex e tD I/II -55°C ≤ Ta ≤ +105°C IP65
Inner thread F: armoured P, taper NPT, metric M and taper pipe R
Outer thread E: armoured P, taper NPT, metric M and straight pipe G and taper pipe R
Our technical dept. can tailor-make adapters and reductions according to your requirements
Quotations for specific modifications as well as detailed technical information for these glands are available on request at [email protected].
GENERI, s.r.o.
Type:
50P, 70P, S
Page: 39
EX COMPONENTS – INSTALLATION BOXES
ZONE 1,2
EMPTY INSTALLATION BOXES TYPE XN
Type of protection:
I M2/II 2GD Ex e tD I/II IP66
ATEX approved Ex component
Ambient temperature ranges:
SILICON-ACETATE seal:
-60°C to +115°C
SILICON seal:
-60°C to +115°C
POLYURETHANE seal:
-40°C to +70°C
XN .. .. ..
XN .. .. .. p
dimensions [mm]
A
B
V
No. of
screws
XN 15 15 09
XN 20 15 09
XN 20 20 09
XN 30 15 09
XN 30 20 09
XN 30 30 09
XN 30 40 09
XN 40 20 09
XN 40 30 09
XN 40 40 09
XN 40 56 09
XN 56 40 09
150
200
200
300
300
300
300
400
400
400
400
560
150
150
200
150
200
300
400
200
300
400
560
400
90
90
90
90
90
90
90
90
90
90
90
90
4
4
4
4
4
4
4
4
4
4
6
6
XN 30 20 15
XN 30 30 15
XN 30 40 15
XN 33 20 15
XN 33 30 15
XN 36 20 15
XN 36 30 15
XN 40 20 15
XN 40 30 15
XN 40 40 15
XN 40 56 15
XN 50 30 15
XN 50 40 15
XN 56 40 15
300
300
300
330
330
360
360
400
400
400
400
500
500
560
200
300
400
200
300
200
300
200
300
400
560
300
400
400
150
150
150
150
150
150
150
150
150
150
150
150
150
150
XN 30 40 19
XN 33 20 19
XN 33 30 19
XN 36 20 19
XN 36 30 19
XN 40 30 19
XN 40 40 19
XN 40 56 19
XN 40 80 19
XN 50 30 19
XN 50 40 19
XN 80 40 19
300
330
330
360
360
400
400
400
400
500
500
800
400
200
300
200
300
300
400
560
800
300
400
400
190
190
190
190
190
190
190
190
190
190
190
190
Order No.
dimensions [mm]
A
B
V
No. of
screws
XN 15 15 09p
XN 20 15 09p
XN 20 20 09p
XN 30 15 09p
XN 30 20 09p
XN 30 30 09p
XN 30 40 09p
XN 40 20 09p
XN 40 30 09p
XN 40 40 09p
XN 40 56 09p
XN 56 40 09p
150
200
200
300
300
300
300
400
400
400
400
560
150
150
200
150
200
300
400
200
300
400
560
400
90
90
90
90
90
90
90
90
90
90
90
90
1
1
1
1
1
1
1
1
1
1
2
1
4
4
4
4
4
4
4
4
4
4
4
4
4
6
XN 30 20 15p
XN 30 30 15p
XN 30 40 15p
XN 33 20 15p
XN 33 30 15p
XN 36 20 15p
XN 36 30 15p
XN 40 20 15p
XN 40 30 15p
XN 40 40 15p
XN 40 56 15p
XN 50 30 15p
XN 50 40 15p
XN 56 40 15p
300
300
300
330
330
360
360
400
400
400
400
500
500
560
200
300
400
200
300
200
300
200
300
400
560
300
400
400
150
150
150
150
150
150
150
150
150
150
150
150
150
150
1
1
1
1
1
1
1
1
2
1
2
2
1
1
4
4
4
4
4
4
4
4
4
4
9
6
XN 30 40 19p
XN 33 20 19p
XN 33 30 19p
XN 36 20 19p
XN 36 30 19p
XN 40 30 19p
XN 40 40 19p
XN 40 56 19p
XN 40 80 19p
XN 50 30 19p
XN 50 40 19p
XN 80 40 19p
300
330
330
360
360
400
400
400
400
500
500
800
400
200
300
200
300
300
400
560
800
300
400
400
190
190
190
190
190
190
190
190
190
190
190
190
1
1
1
1
1
1
1
2
1*
1
2
1*
Order No.
Note:
* Locking mechanism used
** For boxes type XN80....(p) a XN..80..(p) the
girdles are fastened by four M8 screws (DIN
912) into M8 welded nuts with locking thread
Other types and detailed technical information are available on request at [email protected].
Page: 40Type: XN GENERI, s.r.o.
ZONE 1, 2 – ZONE 21, 22 EX COMPONENTS – EMBEDED INDICATORS, FUSES AND TERMINATION ELEMENTS
Ex-proof indicator type XHL…
Type of protection:
Service temperature:
IP protection
Head:
IP protection
Contacts:
Conductor cross-section:
Neck dimensions:
Total dimensions:
Body dimensions:
Nominal current:
Maximum current:
Order No.:
XHL 230 Y
IM2 Ex emb I /
II 2GD Ex emb tD II
–40°C to +85°C
IP 65
IP 20
2 × 0,35 mm2 – 2 × 2,5 mm2
Ø 22,5 mm
(40 × 23 × 60) mm
(40 × 23 × 48) mm
20 mА
30 mА, impulse 100mА
= Indicator XHL, 230 V AC, yellow
Colour: RED, BLUE, YELLOW, GREEN, WHITE
Nominal voltage: 6V, 12V, 24V, 48V, 110V, 230V АC/DC; 110V, 230V AC
Ex-proof indicator type XHL…/JB – intrinsically safe
Type of protection:
IP protection Head:
IP protection Contacts:
Total dimensions:
Body dimensions:
Neck dimensions:
Nominal current:
Maximum input voltage „Ui“:
Order No.:
XHL 24 W/JB
IM1 Ex ia I
II 2GD T68°C Ex ia tD IIC T6
–40°C to +60°C
IP 65
IP 20
2 × 0,35 mm2 – 2 × 2,5 mm2
(40 × 23 × 60) mm
(40 × 23 × 48) mm
Ø 22,5 mm
10 mА
9; 17; 28,2 V AC/DC
= Indicator XHL, 24 V AC/DC, white, /JB - intrinsically safe
Colour: RED, BLUE, YELLOW, GREEN, WHITE
Nominal voltage: 6V, 12V, 24V АC/DC
Ex-proof fuses type XFU…
Type of protection:
Nominal voltage:
Order No :
XFU F 100 H
IM2 Ex ema I IP20
II 2GD Ex ema tD II IP20
–60°C to +84°C
110V DC, 250V AC
2 × 0,35 mm2 – 2 × 2,5 mm2
(40 × 23,5 × 41,5) mm
Note: see mast fuse box type X26SA1 FU..A, page 23
= Fuse XFU, quick breaking, 100 mA, breaking capability Ik = 1500 A
Breaking capability (Ik): H (1500A), E (150A), L (35A)
Nominal current: 50; 63; 80; 100; 125; 160; 200; 350; 315; 400; 500; 630; 800 mА
1; 1,25; 1,6; 2; 2,5; 3,15; 4; 5; 6,3; 8; 10; 12,5; 16 A
Time delay: FF very quick breaking, F quick breaking, M normal, T delayed, TT very delayed
Ex-proof termination elements type XZ..
Type of protection:
IM2/ II 2GD Ex emb tD I/II T6 IP20
–55°C to +84°C
Nominal voltage, current, impedance R, capacitance C, diode type, etc. please see the Order No.
(specific details are also noted on the product label)
2 × 0,35 mm2 – 2 × 2,5 mm2
(40 × 23,5 × 42) mm
Order No.:
XZR 680
= Termination element XZR, impedance 680 Ω
Value of the termination element: e.g. 680 Ω, 4k7, … resistor value (for R element); 400 V, … Nominal voltage
(for Varistor and RC element); 1 A nominal current (for Diode)
Type of termination element: D (diode), R (resistor), RC (resistor and capacitor), V (varistor)
GENERI, s.r.o.
Type:
XHL, XFU, XZ
Page: 41
EX COMPONENTS – EXPLOSION-PROOF CAM SWITCH, TYPE XSV ZONE 1, 2 – ZONE 21, 22
NE
W
• To be built into Ex“e“ and Ex“tD“ enclosures (Ex component)
• Complies with IP 20 for switching units and IP 67 for heads
• Simple attachment into the cover through opening Ø 22 mm
• Switching of control (Ith = 6 A) as well as power (Ith = 16 A) AC or DC circuits
• Up to 6 independently switching Ex units
• Up to 6 positions by 60°
• Any switching diagram
• Mechanical durability > 50 000 switching-over
XSV06-AKF6
• Various executions – lockable in all positions by means of a padlock, self-return, black or red
lever
Type of protection: I M2/II 2GD Ex de tD A I/IIC IP 20/67
Type key:
XSV 06 - A K F 6 –
Contact
13 - 14
23 - 24
33 - 34
43 - 44
53 - 54
63 - 64
Dimensioned sketch XSV06
Switching diagram (cross)
Position
1
2
3
4
×
×
×
×
5
6
×
×
2 to 6 –number of positions
F – fixed positions
L – return to the left
R – return to the right
M – return to the midpoint
N – normal control lever, black
K – control lever lockable in all positions, black
E – control lever lockable in all positions, red
A – head of alloy ZAMAK, galvanised, turning with a plastic lever
06 –Ith = 6 A
16 –Ith = 16 A
Accessories to order:
• Padlock
• Label with text below the head to order
• Spare switching units
Dimensioned sketch XSV16
• Spare control lever
Page: 42Type: XSV GENERI, s.r.o.
ZONE 1, 2 – ZONE 21, 22
EX COMPONENTS – BUSH WIRING
Ex-proof bush wiring type M…х., D…x.
Type of protection:
I M2 / II2GD
type M..S1 × M
Еx de tD/IIC
other types:
Ex d tD/IIC
Service temperature range:
-60 °C to +115°C *
* The maximum ambient temperature range available for all bush wiring types.
The actual value is given by the type of used conductor or cable. Additional
specification on bush wiring products on request.
Threaded bush wiring
Application:
Bush wiring is used in applications where connection between two parts of an
explosion-proof equipment is required, customarily between a flameproof enclosure
and its Ex “e” counterpart securing indirect entry of cables to the enclosure or connecting two independent flameproof units.
Design:
The bush wiring is designed and manufactured as Ex component installed into flameproof electrical devices. The bush wiring represents incomplete flameproof unit
with cylindrical or threaded casing (nickel plating available) and creates, along with
the wall of the electrical device, a gap of corresponding parameters.
D. . . × .
M. . . × .
Ex-proof cylindrical bush wiring
Ex-proof threaded bush wiring
Coaxial cable impedance:
50, 75 or 95 Ω (Type K)
Cylindrical bush wiring
Optical thread: 9/125; 50/125; 62,5/125; 100/125
or 200/300μm (Type O)
Flat cable bush wiring
Optical cable bush wiring
Flat cable cross-section: 28, 26, 24, 20 or 18 AWG
(Type P )
Bolt thread size: M6, M8, M10 or M12 (Type S)
Conductor cross-section: 0,35; 0,5; 0,75; 1; 1,5;
2,5; 4; 6; 10; 16; 25 or 35 mm2 (Type V)
Amount of conductors/cables in the wiring:
1 to 25 (types K, O, and V)
Amount of conductors in the flat cable: 4 to 48 (type P)
Number of bolts in bush wiring: 1 (type S)
Type of the wiring: K – coaxial cables
O – optical cables
P – flat cables
S – key type wiring
V – single conductor cable
Bolt bush wiring
Wiring dimensions:
D24 – cylindrical casing Ø 24 f8
M10 – threaded casing М10 × 1-6g
M24 – threaded casing М24 × 1,5-6g
Different product modifications and complete technical details are available on request at [email protected].
GENERI, s.r.o.
Type: M...X., D...x.
Page: 43
EX COMPONENTS – TRANSFORMERS
ZONE 1, 2 – ZONE 21, 22
Technical data
Nominal power [VA]
Nominal voltage primary/secondary coil* [V]
Maximum secondary coil current [A]
Dimensions a × b × c [mm]
Girdle holes spacing e1 × e2 [mm]
Mainboard installation (no. of screws)
* Different voltages on request
XTO 250
Transformers type XTO
Type of protection:
XTO 250
250
230 / 24
6,3
120 × 145 × 100
105 × 125
4 × M5
XTO 500
500
230 / 24
10
150 × 185 × 120
125 × 165
4 × M5
XTO 557
557
230 / 3 × 24
3 × 6,3
105 × 150 × 152
85 × 105
4 × M6
I M2 Ex e l / II 2GD Ex e tD II
–55°C to +110°C
Application:
Transformers type XTO are designed to supply low nominal voltage and they concur with SELV power
source requirements. It is possible to place them inside I M2 resp. II 2GD rated enclosures and install such
devices in areas with danger of explosion of flammable gases, vapours and dusts and explosives.
Design:
The transformer has loosely held primary and secondary coil conductors. They are connected to independent terminals or directly wired into contacts of components in Ex-proof enclosure. This device is not
protected against short-circuit so it is necessary to use fusing and surge protection equipment.
XTO 500
XTO 250, XTO 500
XTO 557
EX COMPONENTS – POTENTIOMETERS
ZONE 1, 2 – ZONE 21, 22
Ex-proof potentiometer type X195RP
Type of protection:
Load:
Max. collector current:
Max. nominal voltage:
Impedance characteristics:
Nominal impedance:
Values available:
Application:
Shaft diameter:
Connection:
I M2 Ex d I
II 2G Ex d IIC
II 2D Ex d tD A21 IIC
–60°C to +115°C (for group II)
1W
100 mA
250 V AC/DC
linear
47R – 2M2
1K, 2K, 5K, 10K
(different parameters on request)
especially advantageous in frequency changers used for
motor rpm control
Ø 6 [mm]
3 conductors 0,35 mm2, each 30 cm long
Note: also see CONTROL BOXES type X20SA1 RP.. on page 15
Detailed technical information available on request at [email protected].
Type:
XTO, X195 RP
Page:
44
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21, 22
Type of protection DXN1:
Case material:
Order No.
25–1408A
25–14015
25–14013
25–14017
25–34013
25–34017
25–34017–972
25–64013
25–64017
25–64017–972
MARECHAL SOCKETS AND PLUGS
II 2GD EEx ed IIC to Та +40°C T6 T70°C, to Ta +60°C T5 T90°C, IP66/67
Polyester
+
Socket-outlet
DXN1 socket-outlet 20A/24V/2P
DXN1 socket-outlet 20A/230V/1P+N+E
DXN1 socket-outlet 20A/400V/3P+E
DXN3 socket-outlet 32A/400V/3P+N+E+2× auxiliaries
DXN6 socket-outlet 63А/400V/3P+N+E+2× auxiliaries
Wall box 30°
+
Inlet
DXN1 inlet 16A/24V/2P
DXN1 inlet 16A/230V/1P+N+E
DXN1 inlet 16A/400V/3P+E
DXN3 inlet 32A/400V/3P+N+E+2× auxiliary contact
DXN6 inlet 63A/400V/3P+N+E+2× auxiliary contact
Wall mounting
socket
=
Inclined sleeve 30°
Socket-outlet
Order No.
25–1808A
25–18015
25–18013
25–18017
25–38013
25–38017
25–38017–972
25–68013
25–68017
25–68017–972
=
+
Inclined socket
=
Handle
+
Connector
=
Wall box 30°
+
Wall mounting
appliance inlet
=
Inlet
+
Inclined appliance
inlet
=
Handle
Plug
Order No.
Wall box 30°
25–1AB53
DXN1 Wall box 30°, M20
25–1A053–25P
25–3AB53
DXN3 Wall box 30°,M20
25–6AB53
DXN6 Wall box 30°,M25
Order No.
Wall box 70°
25–1AB58
25–1AB58–25P
25–3AB58
25–3AB58–32P
25–6AB58
25–6AB58–40P
Order No.
25–1A027
DXN1 Inclined sleeve 30°
25–3A027
25–6A027
Order No.
Handle
25–1A753
DXN1 handle M20
25–1A253–25P
DXN1 handle M25
25–3A783
DXN3 handle M25
25–3A253–32P
DXN3 handle M32
25–6A253–32P
DXN6 handle M32
25–6A253–40P
DXN6 handle M40
Cable glands M20 are suitable for cables Ø 9 –14 mm, M25 cable glands are suitable for cables Ø 13 – 19 mm, M32 cable glands are suitable for cables Ø 18 – 25 mm, M40
cable glands are suitable for cables Ø 24 – 32 mm.
Quotations for specific modifications as well as detailed technical information about Marechal plugs and sockets are available on request at [email protected].
GENERI, s.r.o.
Type: DXN
Page: 45
INCANDESCENT AND DISCHARGE LIGHT FITTINGS
Types 511 37..., 541..., 581...
Type of protection: grey cast iron:
IM2/II 2GD Ex d I/IIB T (see table) IP 65
aluminium alloy:
II 2GD Ex de tD IIC T(see table) IP 65
Polyester powder colour coating, hardened glass
The lights are connected in series, the end light needs an extra Ex cable plug
On request:
ceiling fixture, shade, for ORION: protective cage
Dimensions:Ø 230 × 400 (incl. cage Ø 230 × 420) mm
Order No.
Light source
Temp.
MINEX 1
ORION
[Type, Power]
Class
Grey cast iron 2)
Aluminium alloy 2)
Incandescent lamp CLAS max. 200W
T41)
511 37 01
511 37 02 t (Kt)
Discharge lamp HWL 160W
T41)
Mercury vapour lamp HQL 80W
T41)
541 33 01
541 33 03 t (Kt)
Sodium discharge lamp NAV-E 50W
541 33 02
541 33 04 t (Kt)
T41)
Sodium discharge lamp NAV-E 110W
541 33 05
541 33 06 (Kt)
Sodium discharge lamp NAV 70W
T41)
581 04 01
581 04 02 t (Kt)
Fluorescent lamp DULUX T 26W
T61)
1)
Incandescent lamp 60 - 100W: T5, Discharge lamp 125W: T3
2)
Protective cage is standard for cast iron version, please order “K” modification for Aluminium body.
Type 511 38..
IM2/II 2GD Ex d I/IIB T(see table) IP 65
Type of protection: grey cast iron:
aluminium alloy:
II 2GD Ex de tD IIC T(see table) IP 65
Polyester powder colour coating, hardened glass
The lights are connected in series, the end light needs an extra Ex cable plug
On request:
ceiling fixture, shade, for SIRIUS: protective cage
Dimensions:Ø 290 × 550 (incl. wire cage) mm
Order No.
Light source
Temp.
SIRIUS
MINEX II
[Type, Power]
Class
Aluminium alloy 3)
Grey cast iron 3)
Incandescent lamp SPC 500W
Discharge lamp HWL 500W
Mercury vapour lamp HQL 250W 1)
T4
511 38 01
511 38 02 t (Kt)
Sodium discharge lamp NAV-E 210W 1)
2)
Sodium discharge lamp NAV-E 350W 2)
1)
requires ballast box type 205.0 t
2)
requires ballast box type 205.1 t
3)
Protective cage is standard for cast iron version, please order “K” modification for Aluminium body.
ZONE 1, 2 – ZONE 21, 22
MINEX I
ORION
SIRIUS
Ballast box type 205
Type 541 38..
Type of protection:
II 2GD Ex de tD IIC (see table) IP 65
Body, cover and flange are made of aluminium alloy. Polyester powder colour coating,
hardened glass, integrated ballast. The lights are connected in series by 5-wire cable.
The end light has one of the cable glands substituted by an Ex cable plug M20×1,5
On request:
shade type 154.5041/02, protective cage, Ex cable plug M20 × 1,5
Dimensions:Ø 290 × 660 mm
Order No.
Light source
Temp.
type HERKULES1)
2)
[Type, Power]
Class
-20°C ≤ Ta ≤ +40°C -20°C ≤ Ta ≤ +55°C -50°C ≤ Ta ≤ +55°C
High-pressure mercury vapour lamp HQL 250W
T5, T4
541 38 03 (K)
541 38 03 t (Kt)
High-pressure sodium discharge lamp NAV-E 210W
High-pressure mercury vapour lamp HQL 400W
T3, T2
541 38 04 (K)
541 38 04 t (Kt)
High-pressure sodium discharge lamp NAV-E 250W T4, T3
541 38 05 (K)
541 38 05 t (Kt)
541 38 05 Ft (KFt)
High-pressure metal halide lamp HQI 250W
T3
High-pressure sodium discharge lamp NAV-E 400W T3, T2
541 38 06 (K)
541 38 06 t (Kt)
541 38 06 Ft (KFt)
T2
High- pressure metal halide lamp HQI 400W
541 38 07 (K)
541 38 07 t (Kt)
541 38 07 Ft (KFt)
T6, T5
541 38 08 (K)
541 38 08 t (Kt)
High-pressure metal halide lamp HCI-TT150W
1)
For version with protective cage, please order “K” modification.
2)
Valid for ambient temperatures in given sequence.
Type:
Page: 46
MINEX, ORION, SIRIUS, HERKULES HERKULES
HERKULES with shade
GENERI, s.r.o.
ZONE 2 – ZONE 22
LIGHTING FOR ZONE 2
Type 511..., 581...
II 3GD Ex nR IIC T (see table) IP65 Ambient temperature -20°C ≤ Ta ≤ +40°C (type "n"); -20°C ≤ Ta ≤ +50°C (type "nt")
Body and flange made of AlSi alloy, hardened glass, designed for connection in series by a 3-wire cable, 230 V AC
Order No. (Temperature class Tx in brackets)
Light source
[Type, Power]
SIMPLEX5)
BILUX
TRILUX
511 14 07 n (nt)
T4 (T4)
511 32 01 n
T4
511 33 02 n (nt)
Incandescent lamp CLAS 200 W/2 x 150 W3)
Discharge lamp HWL 160 W
511 14 07 n (nt)
T4 (T4)
511 32 01 n (nt)
T4 (T4)
511 33 02 n (nt)
511 14 07 n (nt)
T5 (T4)
511 32 01 n (nt)
T5 (T5)
511 33 02 n (nt)
High pressure mercury vapour lamp HQL 80 W1)
511 14 07 n (nt)
T4 (T3)
511 32 01 n (nt)
T5 (T4)
511 33 02 n (nt)
High pressure mercury vapour lamp HQL 125 W2)
511 14 07 n (nt)
T6 (T6)
511 32 01 n (nt)
T6 (T6)
511 33 02 n (nt)
Fluorescent lamp DULUX EL 18 (23) W / 2 × (18)23 W4)
T4
T4
Incandescent lamp max. 100 / 2 × 100 W3)6)
511 14 07 nSt
511 32 01 nSt
511 33 02 nSt
T6
T6
Fluorescent lamp DULUX ELFCY 18 W / 2 × 18 W4)7)
3)8)
511 32 01 nF
Incandescent lamp CLAS max. 200 W / 2 × 150 W
T4
511 33 02 nHt
Incandescent lamp max. 2 × 100W9)
Fluorescent lamp DULUX 7 / 11 W
581 01 02 n (nt)
T6 (T6)
Fluorescent lamp DULUX F 36 W
581 01 03 n (nt)
T6 (T6)
1)
5)
requires ballast box, order No. 604.6 ntB
on request : shade with Ø 382 mm diameter
2)
6)
requires ballast box, order No. 604.6 ntA
operational voltage 24-230 V DC 7) operational voltage 230 V DC
3)
8)
power for TRILUX type is 2 × 150 W (100 W)
for ambient temperature: -50°C ≤ ta ≤ +40°C
4)
9)
power for TRILUX type is 2 × 23 W (18W)
for ambient temperature: -20°C ≤ ta ≤ +70°C
Type of protection:
SIMPLEX
Ø cca 220 × 400 mm
Ballast box type
604.6 ntA (B)
220 × 327 × 130 mm
BILUX
408 × 208 × 155 mm
T4 (T4)
T5 (T4)
T6 (T6)
T6 (T5)
T6 (T6)
T4
T6
T4
TRILUX
Ø 408 × 108 mm
CHALMIT LIGHTING FITTINGS
FOR ZONE 2
ECLIPSE JUNIOR, ECLIPSE II – Ex aluminium light fittings
ECLIPSE JUNIOR
ECLIPSE II
II 3GD Ex nAR II IP 66
II 3GD Ex nAR II IP 66
Type of
protection:
Nominal voltage 220 – 240 V, 50 Hz
220 – 240 V, 50 Hz
For broad variety of accessories please consult us at [email protected]
Type marking: ECJN = JUNIOR; EC2N = ECLIPSE II.
Type
Power
Screw
Temp.
Light source
(order No.)
[W]
cap
class
ECJN/050/HS
50
HPS
E27
T4
ECJN/070/MS
70
HPS/Metal Halide
E27
T4
ECJN/080/MV
80
MBFU
E27
T3
ECJN/125/MV
125
MBFU
E27
T3
ECJN/126/CF
1 × 26
CFL
G24g
T4
ECJN/150/GL
150
GLS
E27
T4
EC2N/050/HS
50
HPS
E27
T4
EC2N/070/MS
70
HPS/Metal Halide
E27
T4
EC2N/100/HS
100
HPS
E40
T4
EC2N/150/MS
150
HPS/Metal Halide
E40
T4
EC2N/250/MS
250
HPS/Metal Halide
E40
T4
EC2N/400/MS
400
HPS/Metal Halide
E40
T3
EC2N/080/MV
80
Mercury Vapour
E27
T3
EC2N/125/MV
125
Mercury Vapour
E27
T3
EC2N/250/MV
250
Mercury Vapour
E40
T3
EC2N/400/MV
400
Mercury Vapour
E40
T3
Ambient
temperature
50°C
50°C
50°C
40°C
50°C
55°C
55°C
55°C
55°C
55°C
50°C
45°C
45°C
45°C
40°C
35°C
eclipse II
eclipse II with shade
eclipse JUNIOR
Detailed technical information on Chalmit Lighting products are available at [email protected].
GENERI, s.r.o.
Type: 511..., 518..., CHALMIT LIGHTING
Page: 47
LIGHTING FOR ZONE 2
ZONE 2 – ZONE 22
CHALMIT LIGHTING FITTINGS FOR ZONE 2
PROTECTA N – Ex fittings for fluorescent lamps
Type of protection:
II 3GD Ex nA II T4 T95°C IP66/67
Chalmit PROTECTA N ATEX, light fitting for standard 2 contact fluorescent lamps,
body made of GRP, polycarbonate cover, 4 × M20 cable entries
BAS01ATEX3276 certificate
Ta = 50°C
Type (order No.)
Power [W]
Light source
Ballast
Nominal voltage/frequency
PR2N/118/BI
1 × 18
Bi – Pin
hf ballast
220 – 240V, 50 – 60Hz
PR2N/218/BI
2 × 18
Bi – Pin
hf ballast
220 – 240V, 50 – 60Hz
PR2N/136/BI
1 × 36
Bi – Pin
hf ballast
220 – 240V, 50 – 60Hz
PR2N/236/BI
2 × 36
Bi – Pin
hf ballast
220 – 240V, 50 – 60Hz
PR2N/218/BI/EM
2 × 18
Bi – Pin
hf ballast
220 – 240V, 50 – 60Hz
PR2N/136/BI/EM
1 × 36
Bi – Pin
hf ballast
220 – 240V, 50 – 60Hz
PR2N/236/BI/EM
2 × 36
Bi – Pin
hf ballast
220 – 240V, 50 – 60Hz
Note
emergency light
emergency light
emergency light
STERLING II ATEX – Ex fittings for fluorescent lamps
II 3GD Ex nA II T4 T95°C IP65
Type of protection:
Chalmit STERLING II ATEX,
light fitting for standard 2 contact fluorescent lamps, body made of GRP,
polycarbonate cover, 2 × 20 mm cable entries,
Sira06ATEX4348X certificate
modification ... / EM: integrated backup power source
HF ballast with EOL function
Type
Power
Light source
Ballast
(order No.)
[W]
ST2N/136/BI
1 × 36
Bi – Pin
hf ballast
ST2N/136/BI/EM
1 × 36
Bi – Pin
hf ballast
ST2N/158/BI
1 × 58
Bi – Pin
hf ballast
ST2N/158/BI/EM
1 × 58
Bi – Pin
hf ballast
ST2N/218/BI
2 × 18
Bi – Pin
hf ballast
ST2N/218/BI/EM
2 × 18
Bi – Pin
hf ballast
ST2N/236/BI
2 × 36
Bi – Pin
hf ballast
ST2N/236/BI/EM
2 × 36
Bi – Pin
hf ballast
ST2N/258/BI
2 × 58
Bi – Pin
hf ballast
ST2N/258/BI/EM
2 × 58
Bi – Pin
hf ballast
220 – 240V, 50 – 60Hz
220 – 240V, 50 – 60Hz
220 – 240V, 50 – 60Hz
220 – 240V, 50 – 60Hz
220 – 240V, 50 – 60Hz
220 – 240V, 50 – 60Hz
220 – 240V, 50 – 60Hz
220 – 240V, 50 – 60Hz
220 – 240V, 50 – 60Hz
220 – 240V, 50 – 60Hz
Note
emergency light
emergency light
emergency light
emergency light
emergency light
MAXINEX, MICRONEX – EX FLOODLIGHTS
Type of protection:
II 3G Ex nR IP65
Chalmit MAXINEX a MICRONEX, Aluminium Ex floodlight, 2 × M20 cable entries (1 × M20 Micronex).
Certificates: MAXINEX – BAS97ATEX4368, MICRONEX – BAS98ATEX3054.
Type
Power
Temp.
Light source
Ballast
(order No.)
[W]
class
Double ended
MICN/070/MS
70
T3
internal
220 – 254V, 50 Hz
HPS/Metal Halide
MAXN/150/MS
150
T4
HPS/Metal Halide
internal
220 – 254V, 50 Hz
MAXN/250/MS
250
T3
HPS/Metal Halide
internal
220 – 254V, 50 Hz
MAXN/400/BI/MS
400
T3
HPS/Metal Halide
internal
220 – 254V, 50 Hz
Ex floodlights type 800 (844, 854 a 864)
Type of protection:
II 3G Ex nR II T3-T4 IP65, 2 × M20 entries, BAS98ATEX3378 certificate
integrated ignition and ballast, ship-hull stainless steel, hardened glass reflector – smooth polished aluminium
Type
Power
Temp.
Light source
Ballast
(order No.)
[W]
class
844N/070/HS
70
150°C T4; T3
HPS
internal
220 – 254V, 50 Hz
854N/100/HS
100
T4
HPS
internal
220 – 254V, 50 Hz
854N/150/HS
150
T4; T3
HPS
internal
220 – 254V, 50 Hz
854N/250/MS
250
T4
HPS/Metal Halide
internal
220 – 254V, 50 Hz
854N/400/MS*
400
T3
HPS/Metal Halide
see *
220 – 254V, 50 Hz
854N/500/TH
500
T3;T2
Sigle Ended T/halogen
internal
220 – 254V, 50 Hz
864N/250/MS
250
T3
HPS/Metal Halide
internal
220 – 254V, 50 Hz
864N/400/MS
400
T3
HPS/Metal Halide
internal
220 – 254V, 50 Hz
* external ballast box UNIE/400/MS required
Page: 48Type: Chalmit Lighting
GENERI, s.r.o.
ZONE 1,2 – ZONE 21
LIGHTING FOR ZONE 1, 2
CHALMIT LIGHTING FITTINGS FOR ZONE 1 AND ZONE 2
PROTECTA III – Ex fittings for fluorescent lamps
II 2GD Ex eqm II T4 Tamb 55°C IP66/67
Type of protection:
Chalmit PROTECTA III ATEX,
light fitting for standard 2 contact fluorescent lamps,
body made of GRP, cover made of polycarbonate,
4 × M20 cable entries, Baseefa04ATEX0220 certificate
modification ... / EM: with integrated emergency power source
modification ... / SE: mast fixture
Power
[W]
2 × 18
2 × 18
2 × 36
2 × 36
Type (order No.)
PRGE/218/BI
PRGE/218/BI/EM
PRGE/236/BI
PRGE/236/BI/EM
Light source
Ballast
Note
Bi – Pin
Bi – Pin
Bi – Pin
Bi – Pin
hf ballast
hf ballast
hf ballast
hf ballast
220 – 254V, 50 – 60Hz
220 – 300 V DC
emergency light
emergency light
EVOLUTION, EVOLUTION II (asymetric)– Ex floodlights
II 2GD EEx de IIC T3/T4 IP66/67
Type of protection:
Chalmit EVOLUTION ATEX, Aluminium Ex-proof floodlight, 2 × M20 cable entries, BAS98ATEX2373 certificate
EVOD design – with stirrup mounting bracket w/ aiming quadrant
EVPD – ceiling fixture
EV2D –corresponds to EVOD but has asymmetric reflector (IIB) with better light distribution, BAS04ATEX0155
Power
Type (order No.)
Light source
Ballast
[W]
EVOD/150/MS
150
HPS and Metal Halide
internal
110 – 254V, 50Hz
EVOD/250/MS
250
internal
110 – 254V,50Hz
EVOD/400/MS
400
internal
110 – 254V, 50Hz
EVOD/600/HS *
600
HPS
external
110 – 254V, 50Hz
EV0D/500/TH
500
Single Ended T/Halogen
not needed
110 – 254V, 50Hz
EVOD/500/TL
* external ballast box UNIE/600/HS required
500
Linear T/Halogen
not needed
24 – 254V, AC/DC
EVOLUTION JUNIOR – Ex floodlights
II 2G EEx de IIC IP66/67
Type of protection:
Chalmit EVOLUTION ATEX, Aluminium Ex-proof floodlight,
2 × M20 cable entries
BAS99ATEX2228 certificate
Designed with stirrup mounting bracket
Type (order No.)
EVJD/070/MS
EVJD/150/TL/24
EVJD/300/TL
Power
[W]
70
150
150–300
Temp.
class
T3/T4
T3
T3/T2
Light source
Ballast
Tungsten–Halogen
Tungsten–Halogen
internal
not needed
not needed
220 – 254V, 50Hz
24V, AC/DC
250V max. AC/DC
NEXLED
Glossary for light sources:
MBFU
– Mercury blended discharge lamp
HPS
– High-pressure sodium lamp
CFL
– Compact fluorescent lamp
GLS
– Incandescent lamp
QL
– Inductance discharge lamp
Mercury Vapour – Mercury vapour discharge lamp
Metal Halide
– Metal halide discharge lamp
T/Halogen
– Metal halide incandescent lamp
216 series
238 series
261 series
Emergency LED Light Robust light fittings with discharge lamps 50 – 400 W. Applicable
with 2 or 8 diodes
for extreme temperatures -50°C to + 70°C. Equipped with compact
and battery source
fluorescent or incandescent lamps. Shades also available.
Different modifications and detailed technical information on Chalmit products are available at [email protected].
GENERI, s.r.o.
Type: Chalmit Lighting
Page: 49
ZONE 1, 2 – ZONE 21,22
HAND, WARNING AND PORTABLE LAMPS AND TORCHES
TORCHES ( CELL POWERED )
ll 2GD EEx e ib IIC T6 T65°C IP67
Type of protection – type ..–26
Type of protection – type ..–24
II 2GD EEx e ib IIC T4(Ta = 40/50°C) T95°C(Ta = 55°C)
Type
Dimensions
Batteries
Weight
Light source
(Order No.)
[mm]
TS–26
2 × R20
2,4V, 0,5A
TS–24
150 g
Ø 65 × 200
2,4V, 0,7A xenon
2 × R20/LR20
2,4V, 0,83A halide
TS–24+1)
TR–26
2 × R20
2,4V, 0,5A
TR–24
190 g
2,4V, 0,7A xenon
2 × R20/LR20
2,4V, 0,83A halide
TR–24+1)
Ø 80 × 195
TR–40
350 g
High-emitting LED
4 × LR6
incl.
TR–40+1)
1,4 W 50 lm
batteries
TR–45
1) types TR–40+, TS–24+ a TR–24+ have low voltage indicators
Type of protection:
Type (Order No.)
R-30
1)
R-502)
R-553)
RECHARGEABLE TORCH WITH CHARGER
ll 2GD Ex e ib IIC T4 tD A21 T85°C1), II 2GD Ex ib IIC T4 tD A21 T85°C2),
II 1G Ex ia IIC T43) IP67
Accumulator
Weight Dimensions [mm]
Light source
340 g
7,4 V
2,4 Ah
Li-Ion
6 V, 4 W halide lamp 54 ml
Ø 80 × 195
375 g
3 W LED 80 lm
Note
Direct
design
Right-angle
design
Charger
R-30(50, 55) L
12-24 V
R-30(50, 55) H
110-254 V
HAND LAMP ( CELL POWERED )
Type of protection:
II 2GD Ex e ib IIC T4 IP66 T135°C
Type
(Order No)
Battery
Weight
Dimensions
[mm]
Light source
H – 4DCA
4 × LR20 (1,5V)
1,45 kg
130 × 140 × 185
2,4 W
halide
Type of protection:
Type (Order No)
H–251A
H–251ALED
C–251HV
C–251LV
XT–701)
RECHARGEABLE HANDLAMP
II 2GD EEx e ib IIC T4 IP66 T135°C, II 2G Ex ib IIC T4 Gb IP671)
Accumulator
Weight Dimensions [mm]
Light source
halide 2,8W
4V 5Ah Pb
1,75 kg
130 × 140 × 185
LED 1 W 60 lm
Mains charger
Car charger
2 × white LED 200 lm
Li-Ion
1,2 kg
136 × Ø 120 × 190
narrow/wide beam
500 charging cycles
regime 50 / 100 %
STROBE/BIKE LIGHTS
Type of protection:
Battery
II 1G Ex ib IIC T4 IP67
Weight
2 pcs AAA 1,5 V
0,1 kg
Type (order no.)
LT–131
LT–133
Colour
white
gold-brown
1) Details can be found on our CD or at [email protected].
Type of protection:
Type
(Order No)
M-101)
M-202)
M-403)
M-603)
Dimensions
[mm]
40 × 45 × 65
LT–135
red
Light source
Note
LED
LT–137
blue
1)
LT–139
green
MINI AND MICRO TORCHES
II 1G Ex ia IIC T51), II 2G Ex ib IIC T42), II 1G Ex ia IIC T43), IP67
Dimensions
Battery
Weight
Light source
[mm]
4 × LR44
25 g
21,5 × 68
1 × 5 mm white LED
2 × LR03
2,3V 0,3A xenon
60 g
21,5 × 145
3 × 5 mm white LED
3 × LR1
1 × 1 W white LED
Page:
50Type: Wolf
GENERI, s.r.o.
ZONE 1, 2 – ZONE 21,22 LIGHTING FOR ZONE 1, 2
ZONE 0 HEADTORCH HT-200 ZONE 0 FOR BATTERIES
Type of protection:
II 1G EEx ia IIC T3 IP54
Type
(Order No)
Battery
Weight
Dimensions
[mm]
Light source
HT – 200
3 × LR6 (1,5V)
325 g
110 × 95 × 85
7 × 5 mm LED
Type of protection:
RECHARGEABLE TORCH DUO WITH CHARGER
ll 2GD EEx e ia IIC T3 Ex iaD 21 T200°C
Type
(Order No.)
Battery
Weight
Dimensions
[mm]
Light source
Charger
HT – 01
Ni-MH
4,8 V 2,7 Ah
380 g
50 × 50 × 60
1. 1 W LED
2. 5 × 5 mm LED
HT–20 12-24 V
HT–01 110-230 V
HAND SAFETY FIREPROOF LAMP 24V
Type of protection:
Type
(Order No)
LL-12
LL-24
LL-42
Type of protection:
Type
(Order No)
LL-01A101)
e8310
2)
II 2G EEx d e IIC T3/T4 IP54
Nominal
voltage
12 V AC/DC
24 V AC/DC
42 V AC/DC
Weight
Dimensions
[mm]
Light source
2,5 kg
205 × 235 × 350
55 W
70 W
65 W
HAND SAFETY LAMP
II 2G EEx d e IIA T3 IP541), II 2GD EEx d e IIC T3 T145°C IP652),
Nominal
voltage
230 V
24 / 42 / 230 V
AC/DC
2,1 kg
Dimensions
[mm]
Ø 141 × 330
2,3 kg
Ø 141 × 376
Weight
Light source
60 W
25 / 40 / 60 W
for all voltage
HAZARD LAMPS (CELL POWERED)
Type of protection:
II 1G EEx ia IIC T4 IP21
Type
(Order No)
Battery
Weight
Dimensions
[mm]
Light source
HL–95
5,6 V 50 Ah
2,9 kg
165 × 180 × 355
2 × LED with high intensity
colour yellow, red for order
Note: switchable mode of lighting – flashing / continous
AIR LAMPS FOR PRESSURE AIR
Type of protection:
Type
(Order No)
A-TL44A1)
A-TL44B2)
A-TL45A1)
A-TL45B2)
II 2GD II T4 T135°C , I M 2 , IP40/68
1)
Pressure/
Consumption
5,0 – 8,0 bar
0,75 m3/min
2)
Weight
Dimensions
[mm]
5,5 kg
170 × 180 × 280
7,1 kg
220 × 180 × 240
Light source
halide 24 V 250 W
Next variants for order.
Type: Wolf
GENERI,
s.r.o.
Page: 51
ZONE 1, 2 – ZONE 21,22
Type of protection:
Type
(Order No.)
RECHARGEABLE HIGH OUTPUT LED FLOODLIGHT
ll 2GD Ex e ib mb IIC T4 tD A21 T135°C IP65
Accumulator
WL–70
Weight
23 kg
18 Ah, 12 V
WL–80
WL–85
Dimensions
[mm]
470 × 240 × 230
16,5 kg
33 Ah, 12 V
16 kg
550 × 240 × 230
Light source
Charger
6 × 3 W LED
(total 510 lm)
12 × 3 W LED
(total 1020 lm)
110-254 V
ATEX PORTABLE FLUORESCENT LEADLAMP LL-500
Type of protection:
ll 2GD Ex embd IIC T3/T4 Ex tD A21 IP66 T100°C
Light source:
Type
Standard 2G11 CFL fluorescent lamp / T8 fluorescent tube
Power
2 × 18 W
4 × 18 W
2 × 36 W
4 × 36 W
2 × 58 W
Luminous flux
2400 ml
4800 lm
5800 lm
11600 lm
9600 lm
Voltage:
220–254 V AC/DC





110–130 V AC/DC
–




42–52 V AC/DC
–
–
–


24–28 V AC/DC
–
–
–


Lenght (L)
0,43 m
0,62 m
0,58 m
0,82 m
0,78 m
Weight (+0,5 kg for 24/42 V)
2,7 kg
4,1 kg
4,1 kg
5,5 kg
5,0 kg
Note: possibility of serie connection several pcs of fluorescence lights, amount of fixing accessories
4 × 58 W
19200 lm

–
–
–
0,94 m
6,4 kg
PORTABLE LIGHTING SET WITH TRANSFORMER
Type of protection:
ll 2GD Ex embd IIC T3/T4 tD A21 T100°C, IP66/68 – lights
T
otection:
ll 2GD Ex de IIC T3/T4 tD A21 T80°C/T135°C, IP66 – transformers
Type
Transformer
Transformer
Transformer
Fluorescent fittings
(Order No)
400 VA
Weight
Dim. [mm]
LL-115
110/24 V GRP
21 kg
460 × 450 × 280
LL-215
230/24 V GRP
4 pcs 2 × 36 W
LL-125
110/24 V SS
23 kg
580 × 370 × 270
LL-225
230/24 V SS
Note: there are variants with 3 pcs fittings 2 × 36 W + 1 pcs 4 × 36 W.
PORTABLE FLUORESCENT LIGHTING
Type of protection:
ll 2GD Ex emb tD IIC T5 A21 T100°C, IP682)
T
otection:
ll 2GD Ex de tD IIC T5 A21 T80°C, IP681)
Type
Weight/
Dimensions
Nominal voltage
Fluorescent lamp
(Order No)
(with cable)
[mm]
230 V AC
0,74 / 1,65 kg
Ø 40 × 600
T5 8 W / 230 V AC 470 lm
KE – Ex – 4008/230–10–02)
24 V AC
0,74 / 1,65 kg
Ø 40 × 600
T5 8 W / 24 V AC 470 lm
KE – Ex – 4008/24–10–02)
230 V AC
3,2 kg
Ø 68 × 665
4-pin 18 W / 230 V AC 1200 lm
KE – Ex – 6818/230–05–01)
24 V AC/DC
3,2 kg
Ø 68 × 665
4-pin 18 W / 24 V AC 1200 lm
KE – Ex – 6818/24–05–01)
1)
Variants also with 24, 36 and 55 W fluorescent lamp
2)
Also type ARMATUR exists (without hook for hanging)
Next variants for order.
Page:
52Type: Wolf
GENERI, s.r.o.
ZONE 1,2
EX OPTICAL AND SIGNALLING EQUIPMENT
FLASHLIGHT
Type of protection:
Dimensions:
Energy:
Weight:
Order No.:
Beacon type 720
Horn type 750
Signalling post type 740
Horn type 761
II 2G EEx de IIC T6 IP67
110 × 243 mm
15Ws
2 kg
Nominal voltage:
24V =
red:
720 101 55
yellow:
720 301 55
SIGNALLING POST
Type of protection:
ll 2GD EEx d IIC T6 T85°C IP66
Dimensions:
155 × 425 mm
Weight:
6,3 kg
Order No.:
Nominal voltage:
24V = LED
red/green:
740 210 55
red/yellow/
740 231 55
green:
Speaker type 710
12–230V ~ Bulb
740 210 00
740 231 00
HORN 750
Type of protection:
ll 2G EEx m II T5 IP55
Dimensions:
152 × 148 × 356 mm
Power:
105 dB
Weight:
1,3 kg
Delivery incl. 3 m of cable 3 × 0,75 mm2.
Order No.:
750 000 ??
instead of ?? enter:
Voltage:
24V =
24V ~
42V ~
115V~
Current:
350 mA
450 mA
200 mA
205 mA
??:
55
65
66
67
230V ~
70 mA
68
HORN 761
Type of protection:
ll 2GD EEx me ll T5 T70° IP 65
Dimensions:
207 × 178 × 103 mm
Power:
105 dB / 1m
Weight:
1,3 kg
Order No.:
761 000 ??
instead of ?? enter:
Voltage:
24V =
24V ~
42V ~
115V ~
Current:
350 mA
450 mA
200 mA
205mA
??:
55
65
66
67
230V ~
70 mA
68
HORN TYPE 4FE
Type of
I M2 EEx d I
protection:
II2G EEx d IIB T5
Dimensions:
129 × 204 × 167 mm
Power:
68 dB / 5m
Weight:
7 kg
Nominal voltage:
24 V
120 V
Order No.:
4FE 601 03
4FE 601 04
Horn type 4FE
230V ~
720 101 68
720 301 68
230 V
4FE 601 05
SPEAKER TYPE 710
Type of protection:
ll 2G EEx dem IIC T5 IP66
Dimensions:
287 × 219 mm
Power:
up to 119 dB (A)
Weight:
3,5 kg
Nominal voltage: 100 V
Order No.:
710 000 00
GENERI, s.r.o.
Type: Ex optical and signalling equipment
Page: 53
PROTECTION BOXES FOR INSTRUMENTATION
ZONE 0, 1, 2 – ZONE 20, 21,22
WE ENSURE PROTECTION OF YOUR INSTRUMENTS
IN THE WORST WEATHER CONDITIONS
All the products below are available in different sizes and designs. We can deliver accessories for inside/outside mounting of the protective equipment, fixtures for the inside content, installation and complete connection of the circuits.
Our specialists are prepared to secure the right equipment for you to achieve your complete satisfaction.
All the detailed information about INTERTEC assortment, catalogues and calculation software in both English and German are to be had at [email protected]
Protection boxes:
MULTIBOX
DIABOX
MINIBOX
Cabinets and housing:
BASIC
CLASSIC
ARTIC SHELTER
Heaters:
Different heaters with several power out
puts including temperature regulation
SAFE LINK system:
Delivery of complete instrumentation
areas
Quotation for specific modifications as well as detailed technical information about INTERTEC assortment are available at [email protected].
Page:
54Type: INTERTEC
GENERI, s.r.o.
ZONE 1,2 – ZONE 21, 22
HEATERS FOR PROTECTION BOXES
WE ENSURE PROTECTION OF YOUR INSTRUMENTS
IN THE WORST WEATHER CONDITIONS
Type of protection:
MICROTHERM
MULTITHERM
VARITHERM
II 2GD Ex dm IIC T (see table) IP68
Order No.
Technical information
Power
Electrical heaters convection type with thermostat against freezing
CP MICROTHERM
CP MICROTHERM DNA 25 T4 TS
25 W
Heaters for vertical mounting
TS – embeded thermostat against
40 W
freezing in feeder cable
75 W
CP MULTITHERM
CP MULTITHREM DNA 75 T4 TS
75 W
Heaters for vertical mounting
CP MULTITHREM DPA 100 T4 TS
100 W
100 W
Standard lenght of feeder cable – 1m
150 W
N = 155mm high
200 W
P = 225mm high
250 W
CP VARITHERM, MEGATHERM
50 W
CP VARITHERM DPA 50 T6 100 TS
Ribbed heaters
125
W
200 W
300 W
P = 220mm lenght
300 W
T = 325mm high
400 W
500 W
CP MEGATHERM DTA 600 T3 TS
600 W
Electrical heaters conduction type
SL BLOCKTHERM
SL BLOCKTHERM DKA T4
50 W
Self limiting heating block
SL BLOCKTHERM DLA T4
50 W
SL BLOCKTHERM DKA T3
80 W
K = 90mm lenght of block
L = 105mm lenght of block
SL BLOCKTHERM DLA T3
80 W
P = 225mm lenght of block
SL BLOCKTHERM DPA T4
100 W
SL BLOCKTHERM DPA T3
150 W
Options
…….AM
Failure signalization
……..3m
Lenght of feeder cable – posibles variant
Optional temperature – for instance CP MULTITHERM
TS ....
DNA 100 T3 TS 40 – regulator of temperature is
adjusted for 40°C
BLOCKTHERM
Order No.*
TAE ATEX ??
?? = 10, 20, 30, 40 °C
TC ATEX AI F ?? C1
?? = 10, 20, 25, 30, 35, 40 °C
TC ATEX AI F ?? J
?? = 10, 20, 25, 30, 35, 40 °C
TC ATEX AI S10–40 C1
TC ATEX AI S10–40 J
TC ATEX D E1 SJ
Includes 1m sensor cable
(max. 2 m on request)
TERMOSTATS, REGULATORS
Description
Ambient thermostat with adjusted
temperature °C
Electronic regulator with adjusted
temperature °C
as above, incl. Build-in junction box
Type of protection
II 2G/D EEx d IIC T6
II 2G/D EEx m II T4
II 2G/D EEx m II T4
Electronic regulator with discreet temperature
(10, 20, 25, 30, 35, 40 °C)
II 2G/D EEx md IIC T4
Dtto, incl. Built-in junction box
II 2G/D EEx emd IIC T4
Electronic temperature regulator with
Ex e junction box and
Ex i sensor
II 2G/D EEx emib IIC T4
Tech. data
250VAC/10A
min. 75W
max. 2000W
min. 75W
max. 1000W
min. 75W
max. 2000W
min. 75W
max. 1000W
min. 75W
max. 2000W
Quotation for specific modifications as well as detailed technical information about INTERTEC assortment are available at [email protected].
GENERI, s.r.o.
Type: INTERTEC
Page: 55
HEAT TRACING SYSTEMS
ZONE 1, 2 – ZONE 21,22
Choose the best solution for your application:
• Delivery of material
• Project, assembly, or chef-assembly
• Turn key delivery of heaters – complex solution including distributors for control and regulation
• Approval at notification body if necessary
Self-limiting heating cables
BSX, RSX, VSX, HTSX
Power limiting heating cables
HPT
Nickel-plated copper bus wires 1,3 mm2
Series heating cables
New TESL and TESXL available
Nickel-plated copper bus wires
3,3 mm2
Radiation cross-linked
semiconductive heating matrix
Solid alloy or copper conductor
Fluoropolymer insulation
Fluoropolymer insulation
Radiation cross-linked
dielectric insulation
Compacted magnesium
oxide insulation
Composite metal alloy/fibre
Heater bus connection
Tinned copper braid
Fibreglass braid
Fluoropolymer dielectric
insulation
Polyolefin overjacket provides
additional protection where
exposure to aqueous inorganic
chemicals is expected
Thermo Tube
Pre-insulated pipes
Metallic sheeth
Nickel-plated copper braid
Fluoropolymer overjacket
Tube trace
Pre-insulated heated pipes
Process pipe
ThermTrac tm
Long pipes heating (up to 25 km) with one feeding
point
Process pipe
Process pipe
ThermTrac conductor
Selflimiting heating
cable
Non-hygroscopic glass
fibre insulation
Heat reflective wrap
Polymer outer jacket
Radiators
Heat tube
Welding connection
Heat reflective wrap
Thermal insulation
Non-hygroscopic glass
fibre insulation
Polymer outer jacket
Industry heaters
Details can be found in our Heat Tracing Catalogue or at [email protected].
Page: 56Type: THERMON
GENERI, s.r.o.

Catalogue of standard products -201

Transcription

Similar documents

$ 4.00

saloon - Sanistal

2007 - Tennis