Weathermatic Brochure | Reece Irrigation

Transcription

SMART
IRRIGATION
SOLUTIONS
FOR THE
®
PROFESSIONAL
PRODUCT CATALOGUE
CONTENTS
CONTROL SYSTEMS
ProLine
SmartLine
SmartWire
SmartLink
WEATHER STATIONS
SLW Series
Rain/Freeze Sensors
SENSORS
SmartLink T Flow Sensor
SmartLink S Flow Sensor
T and S Flow Sensor Placement
SmartLink Combiflow Sensor
Flow Sensor Accessories WireRide
VALVES
Solenoid Valves
Nitro N-100 Series
Silver Bullet 12000 Series
Black Bullet Max 11000 Series
SPRAYS
LX Spray
LXPRS Spray
LXAAN Nozzles
B Series Nozzles
ROTORS
Turbo Rotor Sprinkler
T1 Turbo
T3/T35 Turbo
CT70 Commercial Turbo
WARRANTY
2 // SMART IRRIGATION SOLUTIONS FOR PROFESSIONALS
p. 4
p. 4
p. 8
p. 16
p. 18
p. 22
p. 22
p. 23
p. 24
p. 24
p. 26
p. 28
p. 29
p. 30
p. 32
p. 32
p. 34
p. 36
p. 38
p. 40
p. 40
p. 42
p. 44
p. 46
p. 48
p. 48
p. 49
p. 50
p. 52
p. 54
MIKE MASON - CEO WEATHERMATIC
Thank you for spending a few minutes with us. We think you will find
our products among the most innovative in the industry. We are an
inspired community of people focused on creating innovations that help our
customers save time, reduce costs and conserve water. Weathermatic has
served landscape professionals for seventy years and is proud to offer a full
line of controllers, weather stations, valves, rotors, sprays and nozzles. Our
products have been installed in more than 70 countries on properties
like the U.S. Capitol Building, Buckingham Palace and the College Football
Hall of Fame.
We are the world’s leading provider of Smart Irrigation Controllers with
more than 250,000 controllers installed around the world. The Weathermatic
SmartLine control system is rated as a Consumer’s Digest Best Buy and was
a winner of the Irrigation Association New Product of the Year. This smart
control platform is at the heart of our new SmartLink Network - the intelligent,
affordable, web-based landscape irrigation solution that is allowing thousands
of landscape professionals to manage all their sites from any computer or
mobile device and a simple internet connection.
At Weathermatic, we are committed to being good stewards of all our
resources and sharing the savings with those in need. Weathermatic donates
$1 per month per SmartLink connection to drill clean water wells in underdeveloped countries as part of our Save Water, Give Life campaign. To find
out more and join us in this great cause, visit savewatergivelife.org.
THE LATEST AND MOST POPULAR
FROM THE INDUSTRY LEADER IN
WATER-CONSERVING INNOVATIONS.
WEATHERMATIC PRODUCT CATALOGUE // 3
CONTROL SYSTEMS
PL1604 & PL1608
PL1604 - 4 ZONES
PL1608 - 8 ZONES
While other controllers stop at the standard features needed to run an irrigation system, ProLine ignored
the memo. It not only contains features built for the installers and end-users, but it also has features for
the ones that maintain the systems. Conventional? We proudly say, “no”.
For the Price... Wow
No Battery Required
Anyone new to the ProLine can’t believe all that’s packed
into this controller,
Your program is stored on the ProLine’s on board memory chip.
Even a program that can be restored when “somebody” messes
it up.
The Next Level
Time to Grow
Sure some only set the time, date, run times, and days to
water - but you don’t. That’s why we added many advanced
programming features giving you more power.
Runoff Eliminator
Intelligent Switch
Maximum allowable run time and minimum soak time are set
by program.
Connects to the SmartLink
Network for complete
web-based control.
New landscaping needs a grow-in period. ProLine can be set
to temporarily do this, then return to it’s normally scheduled
programming.
Service tools like: built-in
multi-meter, valve locator,
program backtrack, and
other useful options.
Time for a Masters Degree? Just swap the ProLine panel with
the SmartLine panel.
ProLine was not born on an engineer’s computer screen, rather
crafted by years of contractor input. If it was on their wish list,
it was added to ProLine.
1
6
2
7
3
4
8
PL1600 SERIES
5
9
1
2
FIXED ZONES - MODULAR PANEL
With the PL1604 4 zone fixed and PL1608 8 zone
fixed you can choose the controller to match your
job. ProLine control panels are easily interchangeable
between models, and ProLine can be upgraded to a
SmartLine control panel in seconds for weather based
watering schedules!
7
OMIT TIMES / DAYS / DATES
Automatically comply with local water restrictions;
eliminate irrigated water lost to evaporation in the heat of
the day; stop irrigation on lawn maintenance days; never
water on the date of an annual event (ex: January 26th).
8
MONTHLY % ADJUST
A monthly watering budget % can be set up by program
to automatically adjust zone run times for seasonal
changes.
PATENTED VALVE LOCATOR
Locate hidden valves by simply listening for the audible
chatter of the solenoid created by a unique electrical
frequency. (US Patent No. 7,406,363)
5
No battery required! On board memory chip retains
time, date, and program information even during a
power outage. Plus, daylight savings time is selectable
(On/Off) and programmable! A backlit LCD gives clear
visibility even in dark garages and basements.
ON-BOARD MULTI-METER
Displays the electrical current reading of each zone
for quick troubleshooting and a proactive approach
to maintenance.
4
REAL TIME CLOCK/CALENDAR &
NON-VOLATILE PROGRAM MEMORY
WITH DAYLIGHT SAVINGS TIME
MANUAL TEST SETTINGS IN SECONDS
Complete a walk-thru in a fraction of the normal time
by running a manual test from 10 sec. – 10 min. in 10 sec.
increments.
3
6
10
9
RUNOFF ELIMINATOR
Eliminate run off by setting the maximum allowable
run time and minimum soak time by program.
10
BACKTRACK STORED PROGRAM™ FEATURE
Allows contractor to easily store a default program
and retrieve the saved program in the event a customer
improperly reprograms the PL1600 or needs to return
from a temporary to a normal program.
GROW-IN PROGRAM
Allows contractor to enter a grow-in program for
a temporary watering need (0-99 days) and then
automatically return to normal operation.
CONTROL SYSTEMS
PROLINE CONTROLLER – PL1600 SERIES
• Watering day selections of custom days of the week,
odd/even, or interval days
MODEL DESCRIPTIONS
PL1604
PL1608
• 4-zone fixed station
• 8-zone fixed station
1522605
1522606
• Omit settings: omit time of day window, omit day(s) of week,
and omit up to 15 calendar dates
• Seasonal % adjust by program, by month for simple year
round water budgeting
ADVANCED FUNCTIONS
FEATURES
• PL1604 - 4 zone fixed, PL1608 - 8 zone fixed
• Internal 230VAC transformer with plug and play pre-installed
1.8m line cord (removable for conduit-wired installations)
• Large backlit LCD display
• Rain/Freeze sensor bypass/active button located on face
panel displays sensor status with tri-colour LEDs (red
indicates sensor is prohibiting irrigation; orange indicates an
extended rain delay after weather station rain sensor permits
irrigation; green indicates normal operation)
• 4 programs: A, B, C; program D can operate concurrently
• 8 start times per program
• Nonvolatile memory and real time clock/calendar circuit to
retain programs as well as correct date and time – with no
battery required
• Zone run times settable from 1 min. to 9 hrs. 55 min.
with operation countdown displayed in hours, minutes,
and seconds
• Fault review displays all faults, including open and shorted
zones
• Diagnostic test function using on-board multi-meter displays
transformer voltage; milliamp measurement for each zone
• Built-in valve locator function for locating hidden valves
by simply listening for the audible chatter of the solenoid
created by a unique electrical frequency (U.S. Patent No.
7.406.363)
• Rain delay of 1 – 7 days may be selected (to pause and
automatically resume operation)
• Run/Soak cycles allow setting of maximum run time and
minimum soak time by program
• Zone-to-zone delay programmable for 1 min.
– 3 hrs. to accommodate slow closing valves and recharging
of water supply
• Master valve timing sequence with zone valve programmable
by “On Delay” (1 sec. – 1 min.; 2 sec. default) and “Off Delay”
(1 sec. – 3 min.) 5 sec. default) to allow for line fill and slow
closing valves
• Master valve/pump start operation assignable On/Off
by zone
• Backtrack Stored Program™ feature allows contractor
to easily store a default program and retrieve the
saved program
• Selectable Number of Start Times.
OPTIONS
• SLRC Remote Control
• RFS5 Wireless Rain/Freeze Sensor
• 420-GLS Adjustable Rain Sensor
ELECTRICAL FOR PL1600 SERIES
• Grow-in Program
• Rain Sensor Selectable by Zone
• Automatic Daylight Saving Time Adjustment
Input:
230VAC/50Hz
Output: 24VAC, @ 750mA for 3 valves
1.0A maximum
MANUAL OPERATION
Fuse:
• Manual test runs each zone with zone run times
from 10 sec. – 10 min.
DIMENSIONS
• Manual zone operation of a single zone
(1 min. to 9 hrs. 55 min.)
1.0A, slow blow
23.2 cm x 25.7 cm x 10.2 cm
• Push button manual start of a program from
control panel
CONTROL SYSTEMS
SL1600 & SL4800
SL4800 /
12 TO 48 ZONES
SL1600 - 4 TO 16 ZONES
A Smarter Way to Save Water
Most conventional timer-based systems water on a fixed weekly schedule and do not adjust to changing
environmental conditions. This can result in over-watering of 30% - 50%. What’s more, over-watering
injures plants and creates runoff that can damage paths and driveways.
Weathermatic’s SmartLine System, is the world’s leading weather-based controller. With a feature set that exceeds most high-end
controllers, the unit brings affordable ET based water management to any site - saving precious water resources and maintaining
landscapes in peak condition.
• Installed at more than 250,000 properties, water savings averaging 38%
• Weather-based watering option that auto-adjusts based on geographical location, temperature, and precipitation
• Accounts for seasons, soil, plant and sprinkler type to optimize water efficiency resulting in beautiful landscapes
• Eliminates run-off by providing maximum run-times and soak-times
• Complies with local water restrictions by enabling you to omit days
It turns out that as much as 50%
of water use is for the landscape
The average homeowner
overwaters by
38%
Using conventional timer-based
irrigation systems that turn on
regardless of conditions.
ET Explained
Evapotranspiration (ET) is the rate
at which plants lose moisture due
to evaporation and transpiration.
There is a predictable amount of
replacement moisture that needs to
be applied when rainfall is deficient.
Weathermatic’s SmartLine’s ET-based
controllers account for plant moisture
loss and match irrigation schedules
to the landscapes requirement.
INSTALL A WEATHER STATION TO
ACTIVATE THE SMART FEATURES OF
THE SMARTLINE CONTROLLER.
Seasons, weather patterns, soil conditions and plant types
dictate the amount of water required for landscaping - the
SmartLine System in combination with the SLW weather
station takes all this into account, monitoring conditions to
auto-adjust the controller run time.
HOW THE SMARTLINE CONTROLLER WORKS WITH THE WEATHER STATION
Taking weather data every 8 seconds, the SmartLine weather station automatically adjusts duration, frequency and soak
time, enabling precise water adjustments and an optimum watering schedule. This can reduce water usage by 30 – 50%
while maximising plant health and eliminating runoff. Now that’s smart.
Smart technology waters for actual plant need
Standard controller
program changed 4
times a year
20
15
Smartlink Program changes
made 365 days a year
Mins
10
5
O
WINTER
SPRING
SUMMER
AUTUMN
SMART MODE FUNCTIONS
MORE/LESS
Allows you to fine tune Auto Adjust run times by zone
SOIL TYPE
Add your soil type - clay, loam or sand - to maximize
watering efficiency
PLANT TYPE
ET rates vary by plant type. The ET based SmartLine
controller account for plant moisture loss based on
regional requirements
SPRINKLER TYPE
Add your sprinkler type (spray, drip, rotor) to get the perfect
output rate
ZIP CODE/LATITUDE
ET rates vary by region. ET and climate impact the amount
of irrigation required
CONTROL SYSTEMS
Automated, on-site water management provided by the industry's
leading controller technology...now within reach of everyone.
3
With over 250,000
SmartLine Controllers
saving vast amounts
of water around the
world, your next project
will be added to the
growing list. The
SmartLine feature set
exceeds that of most
high-end controllers,
yet was engineered to
make ET-Based Water
Management affordable
for any sized project.
4
1
2
5
6 - 10
1
TWO CONTROLLERS IN ONE
4
The “Basic” mode programs exactly like
the conventional controllers used by most
manufacturers. There’s no need to learn a new
method. The “Smart” mode is where the power
lies. Combined with our SLW Series Weather
Stations, SmartLine becomes an ET-Based watersaving controller that adjusts watering times 365
days a year.
No flashlight required in dark basements and
garages. No battery required! On board memory
chip retains time, date and program information
even during a power outage.
5
2
SMART MODE
OMIT TIMES / DAYS / DATES
SEASONAL % ADJUST BY MONTH
Automatically comply with local water
restrictions; eliminate irrigated water lost to
evaporation in the heat of the day; stop irrigation
on lawn maintenance days; never water on the
date of an annual event (ex: January 26th).
A monthly watering budget % can be set up by
program to automatically adjust zone run times
for seasonal changes.
ET Watering adjusts the duration, frequency,
and soak time by several factors. Weather Data
combined with geographical location, sprinkler
type, plant type, soil type, and a fine tuning
option, enables your SmartLine controller to
make precise watering decisions.
3
BACKLIT LCD / REAL TIME CLOCK /
CALENDAR & NON-VOLATILE
PROGRAM MEMORY
ACCESS YOUR SMARTLINE
CONTROLLERS FROM
VIRTUALLY ANYWHERE
The days of irrigation controllers being
programmed once, and left alone for months,
is over. The SmartLink Network gives you access
to your SmartLine controllers via your computer,
tablet, or smartphone. Irrigation Management
made simple, affordable, and packed with features.
6 - 10 ADVANCED MENU
The Advanced Menu contains 17 tools, ranging
from diagnostics, troubleshooting, and advanced
water management tools. Below only scratches
the surface.
6
9
BACKTRACK STORED
PROGRAM™ FEATURE
Allows contractor to easily store a default
program and retrieve the saved program in
the event a customer improperly reprograms
the controller. Perfect for Grow-in periods too.
ON-BOARD MULTI-METER
Displays the electrical current reading of each
zone for quick troubleshooting and a proactive
approach to maintenance.
MASTER VALVE / PUMP SETTINGS
Achieve hydraulic control with settings for zone
-to-zone delays, master valve timing, and master
valve On/Off by zone.
BUILT-IN VALVE LOCATOR
Locate hidden valves by simply listening for the
audible chatter of the solenoid created by a
unique electrical frequency. (U.S. Pat #7406363)
7
8
10
RUNOFF ELIMINATOR
Eliminate run off by setting the maximum
allowable run time and minimum soak time
by program.
CONTROL SYSTEMS
SMARTLINE CONTROLLER – SL1600
odd/even, or interval days
MODEL DESCRIPTIONS
SL1600
SLM4
• 4-zone base model,
expandable to 16 zones
• 4-zone module for SL1600
1522540
1522541
• Omit settings: omit time of day window, omit day(s)
of week, and omit up to 15 calendar dates
• Seasonal % adjust by program, by month for simple year
round water budgeting (monthly percentages overridden
in Auto Adjust mode)
ADVANCED FUNCTIONS
FEATURES
• SL1600 - 4 zone fixed, expandable to 16 zones
• Internal 230VAC transformer with plug and play pre-installed
1.8m line cord (removable for conduit-wired installations)
• Fault review displays all faults, including open and shorted
zones
• Diagnostic test function using on-board multi-meter displays
transformer voltage; milliamp measurement
for each zone
• 2 run modes: Standard mode runs user input zone run times;
Auto Adjust mode requires SLW Series On-Site Weather
Station to calculate weather based run times that override
user input zone run times
• Built-in valve locator function for locating hidden valves
by simply listening for the audible chatter of the solenoid
created by a unique electrical frequency
(U.S. Patent No. 7.406.363)
• Rain/Freeze sensor bypass/active button located on face
panel displays sensor status with tri-colour LEDs (red
indicates sensor is prohibiting irrigation; orange indicates an
extended rain delay after weather station rain sensor permits
irrigation; green indicates normal operation)
• Review menu displays accumulated ET deficits by zone
(in centimetres) and corresponding zone run times for
the next available watering day
• Review menu displays temperature readings (daily high
/low) for previous 5 days
• Review menu displays maximum run time and minimum
soak time used during Auto Adjust mode
• Nonvolatile memory and real time clock/calendar circuit to
retain programs as well as correct date and time – with no
battery required
• Review menu accumulates total run times by zone from
the last reset date
• Zone run times settable from 1 min. to 9 hrs. 55 min. with
operation countdown displayed in hours, minutes, and
seconds (zone run times overridden by weather based
calculated values in Auto Adjust mode)
• Rain delay of 1 – 7 days may be selected (to pause and
automatically resume operation)
• Review menu provides the ability to clear deficits for all zones
• SLW weather station extended rain delay programmable
from 0 – 99 hours
• Run/Soak cycles allow setting of maximum run
time and minimum soak time by program for use
in Standard mode only
• Zone-to-zone delay programmable for 1 min. – 3 hrs.
to accommodate slow closing valves and recharging
of water supply
rate or specific input of the zone precipitation rate
(5 - 75mm per hour)
• Plant type input allows selection for zone plant type (COOL
TURF, WARM TURF, SHRUBS, ANNUALS, TREES, NATIVE)
with preset crop factors or specific input of the zone crop
factor (10 – 300%)
• Soil type input allows selection for the soil type
(CLAY, SAND, LOAM)
• Master valve timing sequence with zone valve programmable
by “On Delay” (1 sec. – 1 min.; 2 sec. default) and “Off Delay”
(1 sec. – 3 min.) 5 sec. default) to allow for line fill and slow
closing valves
• More/Less is settable by zone (-50% to +25%) for
the purpose of fine tuning Auto Adjust run times
by zone
• Manual test runs each zone with zone run times
from 10 sec. – 10 min.
• Backtrack Stored Program™ feature allows contractor
to easily store a default program and retrieve the saved
program
MANUAL OPERATION
• Push button manual start of a program from control panel
• Selectable Number of Start Times.
• Grow-in Program
OPTIONS
• SLM4 4-Zone Module
• Selectable Minimum Deficit
• SLW Series On-Site Weather Stations
• SLRC Remote Controls
• Advanced Functions now shows Battery voltage for
SLW weather stations when installed.
ELECTRICAL FOR SL1600 SERIES
AUTO ADJUST FEATURES
Input:
230VAC/50Hz
Output: 24VAC, @ 750mA for 3 valves 1.0A maximum
• ZIP Code input (5 digit) or Latitude input (±60° from
EQUATOR) establish location of site for solar radiation
calculation
• Sprinkler type input allows selection for zone sprinkler type
(SPRAY, ROTOR, DRIP, BUBBLER) with preset precipitation
Fuse:
1.0A, slow blow
DIMENSIONS
23.2 cm x 25.7 cm x 10.2 cm
WAY BEFORE “SMART” BECAME THE
INDUSTRY BUZZWORD, SMARTLINE
WAS CHANGING THE WAY SMART
PEOPLE WERE CONTROLLING THEIR
IRRIGATION SYSTEMS.
CONTROL SYSTEMS
SMARTLINE CONTROLLER – SL4800
• Omit settings: omit time of day window, omit day(s)
of week, and omit up to 15 calendar dates
MODEL DESCRIPTIONS
SL4800
• 12-zone base model,
expandable to 48 zones
1522542
SLM12
• 12-zone module for SL4800
1522543
• Monthly % adjust by program, for simple year round
water budgeting
ADVANCED FUNCTIONS
• Fault review displays all faults, including open and
shorted zones
FEATURES
• 12-zone base model, expandable to 48 zones using SLM12
hot-swappable modules (Indoor/Outdoor rated)
• Internal transformer with commercial terminal block,
On/Off power switch and LED status indicator
• 2 run modes: Standard mode runs user input zone run times;
Auto Adjust mode requires SLW Series On-Site Weather
Station to calculate weather based run times
• Rain/Freeze sensor bypass/active button displays sensor
status with tri-colour LEDs (red indicates sensor is
prohibiting irrigation; orange indicates an extended rain
delay; green indicates normal operation)
• Nonvolatile memory and real time clock/calendar
to retain programs and current date and time –
no battery required
• Zone run times from 1 min. to 9 hrs. 55 min. with operation
countdown displayed in hours, minutes, and seconds
odd/even, or interval days (1 – 30 days)
• On-board multi-meter displays transformer voltage;
milliamp measurement for each zone
• Built-in valve locator chatters the solenoids (U.S. Patent
No. 7,406,363)
• Review menu displays ET deficits by zone,
and corresponding zone run times
• Review menu displays maximum run time and minimum
soak times
• Review menu displays temperature readings
(daily high/low) for previous 5 days
• Review menu accumulates total run times by zone
• Programmable rain delay of 1 – 7 days
• SLW Weather Station extended rain delay programmable
from 0 – 99 hours
• Run/Soak cycles allow setting of maximum run
time and minimum soak time by program for use
in Standard mode only
• Programmable zone-to-zone delay 1 min. – 3 hrs
• Programmable master valve timing sequence
with “On Delay” (1 sec. – 1 min.; 2 sec. default) and
“Off Delay” (1 sec. – 3 min.; 5 sec. default) to allow
for line fill and slow-closing valves
by zone
• More/Less is settable by zone (-50% to +25%) for
the purpose of fine tuning Auto Adjust run times
• Backtrack stored program feature allows contractor to easily
store a default program and retrieve the saved program
MANUAL OPERATION
• Selectable Number of Start Times
• Grow-in Program
• Mode Selection by Zone
• Selectable Minimum Deficit
• Weather Station sensor selectable by Zone
• Increased Rain Delay Setting Options.
• Advanced Functions now shows Battery voltage
for SLW weather stations when installed.
AUTO ADJUST FEATURES
• ZIP Code input (5 digit) or Latitude input (±60° from
EQUATOR) establish location of site for solar radiation
calculation
• Sprinkler type input allows selection for zone sprinkler type
(SPRAY, ROTOR, DRIP, BUBBLER) with preset precipitation
rate or specific input of the zone precipitation rate (5-75mm
per hour)
• Manual test runs each zone with zone run times from
10 sec. up to 10 min.
• Push button manual start of a program from control panel
OPTIONS
• SLM12 12-zone Module
• SLW Series On-Site Weather Stations (see page 21-23)
• SLRC Remote Controls (see page 20)
ELECTRICAL FOR SL4800
Input:
230VAC/50Hz
Output: 24VAC, @ 1250mA for 5 valves 1.6A maximum
Primary fuse: 1.0 A slow blow
Secondary fuse: 1.5 A slow blow
DIMENSIONS
38.1 cm x 41.9 cm x 13.8 cm
• Plant type input allows selection for zone plant type (COOL
TURF, WARM TURF, SHRUBS, ANNUALS, TREES, NATIVE)
with preset crop factors or specific input of the zone crop
factor (10 – 300%)
• Soil type input allows selection for the soil type
(CLAY, SAND, LOAM)
CONTROL SYSTEMS
SmartWire™ is the industry’s first control system to truly be a Smart controller and a 2-wire
controller. The advantages of a SmartWire™ system include cost savings from reduction in
copper wire usage and corresponding trenching, simplicity of wiring and troubleshooting
and ease of expansion when additional zones are needed. Weathermatic SmartWire™ 2-Wire
allows for connection of up to 3 separate 2-wire paths to simplify installation on larger projects.
SmartWire™ is a member of the SmartLine® family of water management products offering
automated, on-site water management.
SMARTWIRE DECODER MODULE
FOR 2-WIRE SYSTEMS
SMARTWIRE SLDEC
– VALVE DECODERS
FEATURES
FEATURES
• Converts the SmartLine® SL1600 Controller to
a 2-wire system for a maximum of 48 zones
(SLM48M) plus master valve
• Decodes signals from Decoder Module
to open and close valves
• Hot-swappable installation
• Shock resistant
• Connections for up to 3 different 2-wire paths
for maximum installation flexibility
• Surge protection
• Programs and operates SmartWire™ SLDEC
Series decoders
• LED display and status lights for programming,
operation status, and troubleshooting with
error codes
• Compatible with SmartLink
OPTIONS
• SLM48DM
Maximum 48 zones - 1522544
• SLM24DM
Maximum 24 zones - 1522569
• Input voltage 24 – 28VAC from 2-wire path
• Fully programmable for valve addresses using
Decoder Module
• Freeze/heat resistant (-20° to 60°C)
• 14 gauge PVC-coated connecting wires
• Sealed electrical components for protection
from water and dirt
• Operates valves to a maximum of 30m
from decoder
• Diagnoses and reports failed solenoids
to the Decoder Module
• Auto shutdown if communication with
Decoder Module is lost
OPTIONS
• SLDEC1
SLM48DM 2-WIRE
DECODER MODULE
for 1-valve operation - 1522545
• SLDEC2
• SLDEC4
SLDEC VALVE
DECODER
SMARTWIRE SLGDT
– LIGHTNING ARRESTOR
FOR 2-WIRE SYSTEMS
SMARTWIRE SLWIRE
• Provides maximum lightning protection for
2-wire paths. Recommended for use on all
SmartWire™ systems
• SLWIRE142-1000
• 2-conductor, jacketed, UL/UF approved for direct burial
• Sunlight resistant
14 gauge, 300m - 1522548
• SLWIRE142-2500 14 gauge, 760m - 1522549
• 1522547
HOW IT WORKS
A SmartWire SLDEC valve decoder is wired to each valve. Each decoder has a programmable address (typically the zone
number), which identifies it to the SmartWire SLM48DM 2-Wire decoder module installed in a SmartLine® SL1600 controller.
SLM48DM
Installed in a SmartLine SL1600
SLWIRE
SLDEC
2 Conductor Twisted Pair Wire
Valve Decoder
SLWIRE142-1000
• The SLM48DM 2-Wire decoder
module broadcasts a command to
activate a certain address or zone. All
decoders on a 2-Wire path “decode”
the message, but only the appropriate
decoder responds and turns the
attached valve on or off. The decoder
reports back to the decoder module
with a status message of positive
operation or an error code.
SLWIRE142-2500
SLGDT
Lightning Arrestor
Install every 150m
The normal 1-year SmartWire warranty is extended to 3 years including
full lightning coverage on systems using SLWIRE and SLGDT lightning
arrestors with proper grounding. All warranties are void on systems not
using SLGDT lightning arrestors with proper grounding.
CONTROL SYSTEMS
Affordable, web-based irrigation management
Computer
Smartphone
Tablet
We have some good news. The days of the dial are numbered. It’s the 21st century, and we access
nearly everything from our smartphones, tablets, and computers. The SmartLink Network has changed
everything, and it’s available now, today, this minute. Unlike the few other options available out there,
you don’t have to install a complicated third-party add-on box, or pay a small fortune for something
that looks like it was made in someone’s garage. Instead, you simply plug-in the SmartLink Aircard for
your Weathermatic SmartLine or ProLine controller and log-in to the network. For pennies a day you
will be the “Commander-in-Chief” of your irrigation systems.
IT’S ALL THERE
REPORTING FOR DUTY
If it’s an option on your controller, it’s an option on SmartLink.
There’s no mystery to what’s occurring at your site.
Web-Based reporting provides historical flow and weather data.
THE CLOUD IS YOUR FRIEND
No matter what happens to the controller, your custom
program is stored in the cloud.
UNLIMITED SITES
Manage multiple controllers from any location, and globally
make changes.
AUTOMATIC UPDATES!
We’re pushing new features to your SmartLink on a regular basis.
LABOUR SAVER
SmartLink can eliminate the need to send someone physically
to a property when system diagnostics or programming
is required. No petrol required.
Smart just became Genius.
Your Link to irrigation
management lives.
SmartLink™ with Flow
Flow Management is nothing new,
but always felt out of reach for most.
It was too expensive, and the controllers
were overkill for the majority of projects.
SmartLink™ with Flow has arrived, and
with it, bringing affordable web-based
flow management to your desktop, tablet,
and even the palm of your hand.
Learn Each Zone’s Flow
Set Flow Limits
Stop Water Waste
Get Email Alerts
View Accurate Reporting
SMARTLINK AIRCARD
WITH FLOW - 1522603
INCLUDES THREE
YEARS ACCESS TO
SMARTLINK NETWORK
PLUG AND SPRAY
In minutes you’ll be controlling your sites from any Web-Based device.
BACKWARDS COMPATIBLE
Connects to over 250,000 existing SmartLine and ProLine controllers.
CELLULAR CONNECTION
Totally wireless. A reliable cellular connection is all you need.
Compatible with SmartLine
Controllers: SL1600/SL4800
REMOTE CONTROL
Your SmartPhone becomes the ultimate remote control. 600m is a thing of the past.
DRAMATIC WATER SAVINGS
Saves an average of 38% in water with smart features.
AVOID THE FINES
Quick compliance with water restrictions to avoid those costly fines.
Compatible with ProLine
Controllers PL1604/PL1608
CONTROL SYSTEMS
HOW IT WORKS
SMARTLINK MOBILE APPLICATION
One popular feature of SmartLink™
is the ability to use it as a remote
control. We’ve developed an App
for both Apple IOS and Android
phones that’s main purpose is
remote valve activation.
Other features include:
Valve Locator
Multiple Site/Controller Access
Map Integration
and more...
WEB USER EXPERIENCE
Accessing your Controller is
as Easy as Accessing the Web
The SmartLink web user experience is intended to make activating and programming your landscape
controller incredibly simple. Appreciate the ease of use that saves time on programming and helps
respond to customer requests or weather related events. Manage hundreds of sites, send global
commands and easily copy programs to save significant time and expense. No sun-screen required.
PROFESSIONAL FEATURES
INSPECTION REPORTING
Unlimited accounts
Assignable account privileges
Unlimited sites
Unlimited controllers
Web browser accessible
Map integration
Search Filters
Single page controller overview
Manual Zone/Program operation
Recent Event list (export to .xlsx)
Valve locator
Basic programming (mirror SmartLine/ProLine features)
Advanced “Smart” programming (mirror SmartLine features)
Seasonal Adjust by month/program
Omit Days & Times
Historical water use reports
Historical temperature overlays
Total gallons used per site/controller/zone
Daily or Monthly summary
Cellular Communication
Tablet optimised
Manually operate zones from within application
Identify then record valve status
Identify then record zone specific problems
Record estimated cost of repairs
Save images for each zone
Notes can be made globally and per zone
Export reports to PDF, XLSX, or XLS
REQUIREMENTS
SmartLine or ProLine controller (Firmware 3.10) with
SmartLink Aircard installed.
Yearly subscription fee
FLOW MONITORING
Real water use reporting
Virtual flow reporting when using standard Aircard
Set low/high flow threshold
Email alerts with low/high threshold is crossed
Mainline and/or Zone automatic shut-down when low/high
threshold is crossed
Automatically learns each zone’s lpm (running avg./current
avg.(FLOW AIRCARD/SENSOR REQUIRED)
Intuitive User Interface
Intuitive Reporting
Inspection Reporting
WEATHER STATIONS
SLW SERIES ON-SITE WEATHER STATIONS
Microprocessor records and
processes weather data for use in
establishing “Smart” Auto Adjust run
times on any SmartLine controller
Weather data is used to create
powerful reporting when connected
to the SmartLink™ Network
Adjustable Rain Sensor - 3, 6, 13
and 19mm
Prevents watering during freezing
weather - below 3˚C
Compatible with the SmartLine®
controller family
SLW5 915 - 928MHz Range
- 450m LOS
SLW1 Includes - 10m of cable
Wireless Version - SLW5
Wired Version - SLW1
Protective white solar shields allow normal air flow
while protecting sensor from direct sunlight for
accurate temperature readings and eliminating the
need for regular cleaning and maintenance of the
weather station
Unit can be mounted in sunlight or shade and in close
proximity to the roof-line
On-board diagnostics indicate battery and
communication status
Remote battery strength measurement from the
SmartLineR controller
Adjustable arm plastic bracket for gutter thumb-screw
or wall mount
Specification Guide
Once the Weather Station is connected to
SmartLine® all of the “Smart” features become
available, saving you a significant amount of water.
Model
Description
Code
SLW5
Wireless Weather Station for
SmartLine® Controllers
1522602
SLW1
Wired Weather Station for
SmartLine® Controllers
1522550
RFS5 RAIN/FREEZE SENSOR
Adjustable Rain Sensor - 3, 6, 13
and 19 mm
Prevents watering during freezing
weather - below 3˚C
Compatible with the SmartLine®
and ProLine controller families
RFS5 915 - 928MHz Range
- 450m LOS
New Compact Design
QUICK INSTALL
10-YEARS OF SERVICE
Installs in minutes and comes with all the needed mounting
accessories. Easy.
You will be 10-years older before the Wireless RFS5’s 2AAA
batteries will need to be replaced.
LOOK GOOD, SAVE WATER
DISCONNECT
Let Mother Nature do the job, and avoid the embarrassment
of having your irrigation system watering during the rain.
The RFS5 wireless rain/freeze sensor enables you to install
the sensor in locations that would otherwise be a challenge
to get to.
Model
Description
Code
RFS5
Wireless Rain/Freeze Sensor for
SmartLine® and ProLine® Controllers
1522656
Compatible with ProLine® and SmartLine® Controllers
420 SERIES RAIN
SENSOR
420GLS
Model
Description
Code
420GLS
Wired Rain Sensor
(10.5m of cable)
1522657
• Adjustable to the most popular rainfall settings: 3, 6, 12
and 19mm
• Tough UV-stabilized plastic housing, never yellows, lasts
for years
• No-rust extruded aluminum bracket – mounts anywhere
• UL-listed watertight switch provides years of reliable service
• Works with virtually all 24 VAC controllers
• Each unit is factory tested
• Includes 10.5m of cable
1522657
SENSORS
SMARTLINK™ SLFSI-T FLOW SENSOR
Weathermatic™ introduces the SLFSI-T, a new tee type
advanced flow sensor for 25mm, 40mm and 50mm PVC pipe.
The SLFSI-T wires directly to the SmartLink™ Aircard with Flow, enabling
web-based flow management from your SmartPhone, Tablet, or Computer.
SmartLine® Controller
SL1600 or SL4800
SmartLink™ Aircard
with Flow
FEATURES:
• Threaded retaining nut makes it easier to service
in a valve box
• The molded mounting tee provides consistent
measurements and overall improved performance
• Four bladed lightweight impeller is sensitive enough
to measure lower flow rates
• Smart electronics capable of better signal filtering
• Affordable enough to install on nearly all new and
old systems
Within the SmartLink settings, the user defines low/
high flow limits based on the Running and Current
Averages learned and calculated. If the threshold is
crossed, the zone valve in question will be shut-off
and email alert sent notifying the user of the event.
WETTED MATERIALS
Impeller – HDPE (High Density Polyethylene)
Shaft – Tungsten Carbide
O-ring – BUNA N
Tee, Sensor Housing, Retaining Nut – Type 1 PVC
The sensor features a square wave digital signal
proportional to flow. The output signal duplicates
existing impeller flow sensor signals making
the SLFSI-T series sensor compatible with all
manufacturers’ control products. The pulse signal
will travel up to 600m without amplification.
PRESSURE RATING
Sensor designed to Schedule 40 specifications
Samples tested to working pressure of 1600 kPa
SENSOR PARTS
TEMPERATURE RANGE
0º to 60º C
Electronic
Housing
OUTPUT SIGNAL
Retaining Nut
Frequency Range: 0.3 Hz to 200 Hz
Output Pulse: 5 msec +/-25%
TRANSDUCER EXCITATION
O-Ring
Quiescent current: 600 uA@8 VDC to 35 VDC max.
Quiescent voltage: (VHigh)= Supply Voltage (600uA X Supply Impedance)
Impeller
On State (VLow)= Max. 1.2 VDC@50mA current limit,
(10Ω +0.7VDC)
Shaft
FLOW RANGE
Sensor Tee
0.25 to 15 FPS
ELECTRICAL CABLE
2 single conductor solid copper U.L. listed #18 AWG leads
with direct burial insulation
Lead length: 1.2m
Wiring may be extended up to 600m with direct burial,
twisted pair shielded cable
SLFSI-T Flow Sensor Dimensions
Size
Model No.
Description
A Length
B Length
C Length
Code
25mm
SLFSI-T10
1" Tee Type Insert Flow Sensor Used with the SmartLink Flow Aircard
143 mm
43 mm
88 mm
1522658
40mm
SLFSI-T15
1 1/2" Tee Type Insert Flow Sensor Used with the SmartLink Flow Aircard
157 mm
58 mm
130 mm
1522659
50mm
SLFSI-T20
2" Tee Type Insert Flow Sensor Used with the SmartLink Flow Aircard
178 mm
73 mm
116 mm
1522660
SENSORS
SMARTLINK™ SLFSI-S FLOW SENSOR
Weathermatic™ introduces the SLFSI-S, a new series of saddle
type flow sensors for 80mm and 100mm PVC pipe.
The SLFSI-S wires directly to the SmartLink™ Aircard
with Flow, enabling web-based flow management
from your SmartPhone, Tablet, or Computer.
SmartLine® Controller
SL1600 or SL4800
SmartLink™ Aircard
with Flow
The saddle type sensors utilize the same flow sensor insert
used in the tee type SLFSI-T Series sensors.
SLFSI-S Key Features
The insert, held in place with a retaining nut, contains the
detection circuitry and carries the unique four-bladed ultra
light impeller on a transverse axle.
Flow Range
1/4 to 12 FPS equivalent to:
22.7 to 1135 LPM in 80mm PVC
37.8 to 1817 LPM in 100mm PVC
Working Pressure
Rating
1000 kPa @ 32˚C
The insert mounts in a housing that controls the depth and
alignment of the impeller, unlike insert type sensors that
may be mis-aligned or set to the wrong depth. The housing
is permanently attached to the PVC saddle; therefore, no
additional mounting hardware is required.
Outputs
001
Two wire
standard pulse
002
Two wire
scaled output
004
Three wire
standard pulse
006
Three wire low power
TTL compatible
WETTED MATERIALS
Impeller – HDPE (High Density Polyethylene)
Shaft – Tungsten Carbide
O-ring – BUNA N
Saddle, Sensor Housing, Retaining Nut – Type 1 PVC
The sensor features a square wave digital signal
proportional to flow. The output signal duplicates
existing impeller flow sensor signals making
the SLFSI-S series sensor compatible with all
manufacturers’ control products. The pulse signal
will travel up to 600m without amplification.
PRESSURE RATING
1000 kPa @ 32˚C
TEMPERATURE RANGE
SENSOR PARTS
0º to 60º C
Sensor
Insert
OUTPUT SIGNAL
Frequency Range: 0.3 Hz to 200 Hz
Output Pulse: 5 msec +/-25%
Retaining Nut
TRANSDUCER EXCITATION
Quiescent current: 600 uA@8 VDC to 35 VDC max.
Quiescent voltage: (VHigh) = Supply Voltage (600uA X Supply Impedance)
On State (VLow) = Max. 1.2 VDC@50mA current limit,
(10Ω +0.7VDC)
Wedge
FLOW RANGE
0.25 to 12 FPS
80mm saddle: 22.7 to 1135 LPM
100mm saddle: 37.8 to 1817 LPM
Impeller
ELECTRICAL CABLE
Saddle
2 single conductor solid copper U.L. listed #18 AWG
leads with direct burial insulation
Lead length: 1.2m
Wiring may be extended up to 600m with direct burial,
twisted pair shielded cable
Flow Sensor Dimensions
Minimum Clearance Above Sensor Required for Removal — 96 mm
Size
Model
Number
Description
Overall Length
Overall Width
Overall Height
Code
80mm
SLFSI-S30
3" (76mm) Saddle Type Insert Flow Sensor
- Used with the SmartLink Flow Aircard
127mm
140mm
165mm
1522661
100mm
SLFSI-S40
4" (102mm) Saddle Type Insert Flow Sensor
- Used with the SmartLink Flow Aircard
127mm
165mm
190mm
1522662
SENSORS
T AND S FLOW SENSOR PLACEMENT
For the purpose of this illustration we have demonstrated the T-Flow Sensor.
SmartLink™ Flow Sensor Model
Nominal Pipe Size
Minimum Flow
Maximum Flow
SLFSI-T10
25mm
SLFSI-T15
40mm
SLFSI-T20
50mm
SLFSI-S30
80mm
SLFSI-S40
100mm
m/sec
LPM
LPM
LPM
LPM
LPM
0.08
3.25
6.8
10.6
22.7
37.9
0.3
13.2
27.4
42.8
94.6
151.4
0.61
26.5
54.9
87.1
189.3
302.8
0.91
39.4
83.3
128.7
283.9
454.2
1.52
64.4
136.3
215.8
473.2
757.1
2.13
90.8
193.1
299
662.4
1059.9
3.05
132.5
272.6
427.8
946.4
1514.2
3.66
159
329.3
514.8
1135.6
1817
4.57
196.8
408.8
643.5
1.72 kPa
1.24 kPa
1.03 kPa
1.03 kPa
1.03 kPa
Friction Loss at Max Flow
APPLICATION
Connect two SLFSI Series Flow Sensors on
different Points of Connection (POCs) to a
single SmartLink Aircard with Flow.
Connect two SLFSI Series Flow Sensors in a
looped piping system to a single control input.
1522663
Connect the outputs of a two flow sensor
“compound meter” assembly to the SmartLink
Aircard with Flow.
The SmartLink™ Flow - Combiflow is a signal
controlled device that conditions and scales
the signals from two digital flow sensors and
combines them into one scalable digital output.
The SmartLink Aircard then perceives the signal is
coming from a single flow sensor.
The output signal may be scaled
to resemble the output of one
of the connected flow sensors,
another larger flow sensor or a
Custom value.
The SmartLink™ Flow - Combiflow is compatible
with the SLFSI Series of Flow Sensors and most
other sensors producing a square or sine wave
output proportional to rate of flow.
CHECK THE PULSE
ALL ABOUT RETROFIT
SmartLink™ with Flow
removes the guess work.
Water-saving becomes
specific, it becomes provable
- not just a percentage. We’ve
made monitoring, measuring
and managing water usage
an intuitive tool.
Now that Flow Management
is affordable, a window of
opportunity has opened.
Existing irrigation systems
benefit the most.
SENSORS
FLOW SENSOR ACCESSORIES
The SLF-WIRERIDE enables installation
of a new Master Valve and Flow Sensor
on an irrigation system, without the need
of running new wire back to the irrigation
controller. With WireRide, the new
Master Valve and Flow Sensor essentially
“hitch a ride” back to the controller using
a nearby preexisting zone wire.
HOW IT WORKS
The WireRide Controller Module mounts
near the SmartLine™ controller. It routes
the Master Valve, Flow Sensor, and the
nearby Zone Valve to their corresponding
location in the SmartLine controller
and to the SmartLink Flow Aircard.
SLF-WIRERIDE
Controller Module
SmartLink™ Flow Accessories
Model
SLF-WIRERIDE
Description
Add SLFSI Flow
Sensor and a
Master Valve
Without Running
New Wire to the
Controller
Description
1522684
SLF-WIRERIDE
Field Module
A SIMPLE WALK-THROUGH OF THE EXAMPLE BELOW:
Install the new Master Valve and Flow Sensor
Locate a nearby preexisting Zone Valve
Connect the Zone valve, new Master and Flow
Sensor to the WireRide Field Module.
The existing Zone Valve wire is now being used
by the Field Module to connect to the
Controller Module.
The Controller Module mounts next to the
SmartLine controller and routes power and flow
signals to the appropriate devices.
VALVES
SOLENOID VALVES
Once installed, a valve is the last thing you ever want to see again.
Take a good look, the Bullet Series of valves is known for being
installed and then forgotten.
Let’s face it, there are many choices of
economical valves available. We understand that.
What you might not realize is that the Nitro’s built
from the same technology found in our legendary
Silver and Black bullet valves. This means you will
install a valve that’s unmatched in performance
and price. Give it a try.
2 YEAR WARRANTY
MADE FROM 100% VIRGIN PVC
EASY ACCESS COVER
PRESSURE ACTIVATED DIAPHRAGM
REVERSE FLOW DESIGN
MOULDED “SHOCK CONE”
N-100 Series
1000 kPa
12000 Series
1000 kPa
MARINE-GRADE SOLENOID
There’s a good reason we call it the Silver Bullet.
The thousands of users around the world know
why, and when you install it, you will to. Habits are
hard to break, and most installers have installed the
same valve for years. It’s time for you to make a
change. Chamber a round, and put the Silver Bullet
in your next install.
2 YEAR WARRANTY
RESIDENTIAL - COMMERCIAL
GLASS-FILLED NYLON
20-YEAR TRACK RECORD
BOLT-ON COVER
REVERSE FLOW DESIGN
MARINE-GRADE SOLENOID
If an extra-shot of strength for your most
demanding site is required, the Black Bullet
Max can handle it. The world renowned
Weathermatic solenoid has been enhanced
for the highest of pressures.
10 YEAR TRADE WARRANTY
S24B HIGH-EFFICIENCY SOLENOID
BRASS “SHOCK CONE”
BRASS NON-RISING FLOW CONTROL
CONTAMINATION-RESISTANT
REVERSE FLOW DESIGN
11000 Series
1550 kPa
VALVES
Consider 9 Compelling Reasons why the N-100 Series Nitro
is the Smart Solution!
1
2
4
3
6
7
8
9
5
1
DURABLE MATERIAL
6
• Hydrostatic tests prove Nitro resistance to cracking
at over 4800 kPa
2
3
7
• The Weathermatic hallmark reverse flow design
with a 45-year track record brings you:
• Combination hex, slot and Phillips retaining screws
provide multiple access options and superior
operation up to 1000 kPa
• Reverse flow design means the valve fails shut rather
than open in the event of diaphragm failure, unlike
conventional forward flow valves that fail open
• Weathermatic installers will tell you they rarely need
to open a Nitro valve
• Balanced pressure on the diaphragm extends valve
diaphragm life beyond forward flow valves
UNMATCHED MANUAL BLEED
• Self-cleaning function is achieved as diaphragm
actually flexes during operation to send dirt and
debris down the line without the maintenance worry
of filters and screens
• It’s the easiest, driest internal manual bleed in the
business that won’t flood the valve box
• No twisting on a solenoid or bleed screw is required
8
5 YEAR TRACK RECORD
• The Nitro track record shows less than a fraction of
1% return rate over 5+ years of reliable performance
SHOCKING SHOCK CONE
• The Nitro puts the hammer to water hammer by
incorporating a cone-shaped diaphragm base
• The shock cone interrupts the water flow more
gradually than other diaphragms to enable quick valve
closure without the damaging effect of water hammer
5
REVOLUTIONARY REVERSE FLOW DESIGN
EASY ACCESS COVER
• Send the Nitro into action by simply pulling the trigger
4
PRESSURE ACTIVATED DIAPHRAGM
• Pressure activated diaphragm ensures reliable
operation with no leakage at pressures up to 1000 kPa
• 100% virgin material gives the Nitro added strength
over conventional PVC valves
MULTIPLE CONNECTION CONFIGURATIONS
• Female threaded connections allow for multiple
configurations
9
AMAZING VALUE
• Seasoned installers know that valves are the last place
to cut expenses when just one call-back eliminates any
cost savings on the job
N-100 SERIES – NITRO REMOTE CONTROL VALVE
FEATURES
• 2 year warranty 100% water tested
• Engineering grade PVC body and cover with
combination hex, slot and Phillips retaining screws
• Non-rising flow control stem throttles valve from
full open to closed position on flow control models
• 1000 kPa rating
• Minimum operating pressure of 103 kPa
• Maximum water temperature = 40°C at
continuous flow
• Unique “reverse flow” design permits equal pressure
distribution on both sides of the diaphragm, regardless
of line pressure, providing zero stress to prevent
“stretching,” a common cause of valve failure
• Chlorine - and chloramine - resistant EPDM diaphragm
material
ELECTRICAL
• Wiring requires a single lead from the controller to each
solenoid, plus a common neutral to all solenoids; type
UF wire, U.L. listed, is recommended for all hookups
• Reverse flow design for water conservation in the
event of failure
24VAC/50HZ
• Diaphragm’s self cleaning ports constantly flex,
inhibiting sand and silt from blocking valve action
Inrush: 0.44 Amps
• Molded shock cone for smooth operation and reduction
of water hammer
• Do not use nominal voltage ratings listed above
for sizing of valve wire
• Easy-to-use internal manual bleed lever; bleeds valve
downstream; has positive stops for open and closed
positions
MODEL
Holding: 0.25 Amps
1522524
25mm FIP with flow control
• Marine-grade S20P solenoid with stainless steel actuator
N-100 SERIES VALVE
PRESSURE LOSS
METRIC
Flow
L/min
Loss
kPa
0-15.14
9 max
15.14
9
22.71
14
30.28
19
37.85
22
45.42
25
53.00
28
60.57
30
68.14
32
75.71
33
83.28
35
90.85
38
98.42
41
106.00
45
113.56
47
121.13
50
132.49
51
1522524
VALVES
Consider 7 Compelling Reasons why the 12000 Series
Silver Bullet is the Smart Solution!
1
2
4
3
5
1
2
SUPERIOR MATERIAL
6
5
• The Weathermatic hallmark reverse flow design
with a 45-year track record brings you:
• Pick up a Silver Bullet in one hand and any other valve
in the other to feel the difference
• Reverse flow design means the valve fails shut rather
than open in the event of diaphragm failure, unlike
conventional forward flow valves that fail open
BOLT-ON COVER
• Balanced pressure on the diaphragm extends valve life
over forward flow valves
• Self-cleaning function is achieved as diaphragm
actually flexes during operation to send dirt and debris
down the line without the maintenance
worry of filters and screens
• Weathermatic installers will tell you they rarely need to
open a Silver Bullet valve. If you do, it is easier to open
and close than most valves using screws or jar tops
that are susceptible to stripping, dirt, and grit.
6
• It’s the easiest, driest internal manual bleed in the
business that won’t flood the valve box
• No twisting on a solenoid or bleed screw is required
SHOCKING SHOCK CONE
• The Silver Bullet puts the hammer to water hammer
by incorporating a cone-shaped diaphragm base
• The shock cone interrupts the water flow more
gradually than other diaphragms to enable quick valve
closure without the damaging effect of water hammer
15 YEAR TRACK RECORD
• The Silver Bullet track record shows less than a fraction
of 1% return rate over 15+ years of reliable performance
UNMATCHED MANUAL BLEED
• Send the Silver Bullet into action by simply pulling
the trigger
4
REVOLUTIONARY REVERSE FLOW DESIGNS
• Glass-filled nylon construction gives the Silver Bullet
added strength over conventional PVC valves
• Stainless steel bolts easily thread in and out of quality
brass inserts
3
7
7
AMAZING VALUE
• Seasoned installers know that valves are the last
place to cut expenses when just one call-back
eliminates any cost savings on the job
12000 SERIES – SILVER BULLET REMOTE CONTROL VALVE
FEATURES
• 2 year warranty 100% water tested
• Non-rising flow control stem throttles valve from
full open to closed position on flow control models
• Chlorine - and chloramine - resistant EPDM diaphragm
material
• 1000 kPa rating
• Maximum water temperature for 25mm valve = 40°C
at continuous flow
• Maximum water temperature for 40mm & 50mm valve
= 60°C at continuous flow
ELECTRICAL
• Unique “reverse flow” porting design permits equal
pressure distribution on both sides of the diaphragm,
regardless of line pressure providing zero stress to
prevent “stretching,” a common cause of valve failure
24VAC/50HZ
• Reverse flow design for water conservation in the event
of failure
• Do not use nominal voltage ratings listed above
for sizing of valve wire
MODELS
• Molded shock cone for smooth operation and reduction
of water hammer
downstream; has stops for open and closed positions
Inrush: 0.44 Amps
Holding: 0.25 Amps
1522525
1522526
1522527
• Marine-grade S20P solenoid with stainless steel actuator
• High-strength glass-filled nylon body and cover
with ¼" stainless steel cover bolts and mating
brass body inserts
12000 SERIES VALVE
METRIC (Pressure Loss kPa)
Flow
L/min
1522525
25mm
0-15.14
8 max
22.71
12
30.28
17
37.85
21
1522526
40mm
56.78
27
75.71
32
9
94.64
36
11
113.56
43
13
132.49
50
1522527
50mm
1522527
17
151.42
21
16
170.34
26
17
189.27
32
18
208.20
39
19
227.12
46
20
264.98
66
23
302.83
90
1522526
23
340.69
29
378.54
36
416.40
46
454.25
53
492.10
61
1522525
VALVES
11000FCR SERIES – BLACK MAX REMOTE CONTROL VALVE
FEATURES
• Contamination-resistant (CR)
• 10 year warranty and 100% water tested
• Chlorine-and chloramine-resistant EPDM diaphragm
material
• 1550 kPa rating
ELECTRICAL
• Maximum water temperature = 60°C at continuous flow
• S24B high-efficiency solenoid for positive opening at
high pressures; includes stainless steel actuator and
brass threads for long life
• Unique “reverse flow” porting design permits equal
pressure distribution on both sides of the diaphragm,
regardless of line pressure providing zero stress to
prevent “stretching,” a common cause of valve failure
• Reverse flow design for water conservation in the event
of failure
• Brass shock cone for smooth operation and reduction
of water hammer
downstream; has stops for open and closed positions
• High-strength glass-filled body and cover with ¼"
stainless steel cover bolts and mating brass body inserts
• Brass non-rising flow control stem throttles valve from
full open to closed position
• Excellent for low volume irrigation
24VAC/50HZ
Inrush: 0.45 Amps
Holding: 0.31 Amps
• Do not use nominal voltage ratings listed above for
sizing of valve wires
MODELS
1522534 25mm FIP
1522535 40mm FIP
1522536 50mm FIP
11000FCR SERIES VALVE
METRIC (Pressure Loss kPa)
Flow
L/min
1522534
25mm
0-15.14
8 max
22.71
10
30.28
12
1522535
40mm
1522536
50mm
37.85
13
56.78
14
75.71
18
94.64
24
12
113.56
32
14
132.49
43
17
151.42
54
21
16
170.34
64
26
17
189.27
77
10
31
17
208.20
37
18
227.12
51
20
264.98
68
23
302.83
90
23
340.69
29
378.54
34
416.40
42
454.25
50
492.10
62
VALVE ACCESSORY - PRK-24 PRESSURE REGULATOR
The PRK-24 may be used
with the 11000 Series valves.
1522572
15
•
Minimum flow (see valve tables)
•
Maximum flow (see valve tables)
•
Minimum pressure differential between inlet
and outlet: 70 kPa
• Regulated pressure range at outlet: 100 - 760 kPa
(± 35 kPa)
•
• The Weathermatic PRK-24 pressure regulating module
senses inlet pressure and maintains constant outlet
pressure regardless of inlet pressure variation
•
Manual flow and bleed control
• Regulates pressure when valve is operated electrically
or manually
• Downstream connection for accurate pressure sensing
• Schrader valve for connecting pressure gauge
Maximum inlet pressure: 1030kPa
SPRAYS
Consider 10 Reasons why the LX Series is the Smart Solution!
1
2
FUNCTIONAL FLUSH PLUG
5
• Easy lift, flexible material allows you to quickly
pop off flush plug without having to unscrew
• Prevent low head drainage by purchasing the
affordable LX-CV
• Lift the turret for nozzling so you can save time
(and your pinky!)
• With the ability to hold back 2.9m of elevated water,
the LX-CV brings the industry an economical way to
conserve water lost to low head drainage
SURE GRIP CAP
• Combine the LX-CV with the standard Ready Check™
check valve on the Weathermatic Turbo rotor line
for a totally checked water conserving system
• Wet or muddy-hand friendly
• Available non-potable cover fits snugly on cap
for identifying reclaimed water
6
3
READY CHECK™ CHECK VALVE
SUPERIOR MATERIAL
• Weathermatic uses only 100% virgin material
– no regrind
SUPERIOR SEAL
• 10-year rating; exceeds 11,000 cycles in sand burial tests
• For added strength: eight internal reinforcements
and a ribbed body
• One piece seal design prevents cap to body leaks
• Ultra-low flushing design enables pop-up & sealing
at only 30 kPa and allows more heads to be installed
on a line
7
LX ADJUSTABLE ARC NOZZLES
• Extra long wiper seal design provides extended life
and positive retraction in the toughest conditions
4
• The ultimate nozzle for flexibility in the field and
reducing nozzle inventories
RUGGED RATCHET
• Beefy two-piece ratchet teeth provide just the right
feel; not too light where the head could inadvertently
move the arc, not too tight where you can’t adjust
under pressure
• Arcs are easily adjusted by hand using sure-grip
ridges or by coin/screwdriver in slot
• Color-coded identification in a resealable bag
• Try one and compare!
8
LX B SERIES BRASS NOZZLES
• The best performing spray nozzle
in the business, period.
1
• Wide nozzle spacing selection 10’,
15’, 18’ and 20’, plus strip nozzles
3
• Extended spacing gets the job done with fewer heads
and less cost by saving pipe, wire, fittings, and labor
2
9
5 YEAR WARRANTY
• With millions of LX heads and nozzles installed
worldwide, return rates are less than a fraction
of 1%, even with a 5-year trade warranty
6
10
LX VALUE
• Considering all of these benefits, you will be
amazed to buy the LX line of sprays and nozzles
at an extremely competitive price
• Try the entire LX Series and experience the LX
difference!
4
5
7
8
9
10
LX MODEL SPECIFICATION
STANDARD
Model
Pop-up Height
METRIC
CODE
LX3
3"
7.6 cm
1522664
LX4
4"
10 cm
1522665
LX6
6"
15 cm
1522666
LX12
12"
30 cm
1522667
LX-CV
Check valve
1522668
LX-NP
Snap-on cover
1522669
LX CHECK VALVE
DIMENSIONS
1/2" FEMALE THREADED INLETS
STANDARD
Model
Body Height
METRIC
LX3
5 ¼"
13.3 cm
LX4
6 ¼"
15.9 cm
LX6
8 ½"
21.6 cm
LX12
15 ¼"
38.7 cm
Exposed Cover
2 ¼"
5.7 cm
LX-NP
NON-POTABLE
COVER
LX SERIES
OPERATING DATA
• Pressure range: 100 kPa - 480 kPa
• Flow-by: Zero @ 30 kPa or greater
• Compatible with all industry-standard female
thread nozzles
• Ratchet nozzle alignment
• Side and bottom inlets on LX6 and LX12*
• Side inlet installation on LX6 and LX12 is not
recommended in freezing climates.
LX3
LX4
LX6
LX12
SPRAYS
LXPRSSpray
All spray nozzles perform at their best and provide the
most uniform distribution at an outlet pressure of 210 kPa.
The pressure regulating stem (PRS) maintains the pressure
to the nozzle at the optimum 210 kPa, even with varying
inlet pressure, ensuring maximum nozzle performance.
The PRS saves both money and water by helping
to stop misting and fogging caused by high water
pressures and improves the efficiency and evenness of
water distribution on the landscapes. This more even
application of water means you can run your system for
less time while still applying the right amount of water to
the landscape.
MAINTAINS CONSTANT PRESSURE
PRS maintains constant outlet pressure at 210 kPa.
Spray nozzles perform best at 210 kPa. Ensures maximum
nozzle performance, even with varying inlet pressures.
Maintains constant pressure regardless of nozzles used.
RESTRICTS WATER LOSS
PRS restricts water loss by up to 70% if a nozzle is
removed or damaged, saving water and money. It also
maintains consistent performance throughout the rest
of the zone keeping plant life properly irrigated by other
spray heads.
ENDS MISTING AND FOGGING
PRS ends the misting and fogging caused by high
pressure, stopping water waste. Ensures that appropriate
watering occurs in high pressure or windy conditions.
NO PARTS INSTALLATION ONSITE
Built-in check valve (CV) eliminates the need for underthe-head check valves. No parts to be installed at the site.
MAINTAINS WATER IN LATERAL PIPES
Check valve maintains water in lateral pipes in elevation
changes of up to 2.90 m. Prevents drainage from spray
heads at lower elevations. Stops water waste. Ends
landscape damage due to flooding and/or erosion.
Pressure regulating
valve in stem
EASY IDENTIFICATION
“PRS-CV” stamped on cap for easy identification
and maintenance.
LX4PRS30
FEATURES
In-Stem pressure regulator set to 210kPa
Flush Plug has easy lift, flexible material
5-Year Trade Warranty
Body cap designed for slip free gripping
One piece designed wiper seal
Ultra-low flushing enables 30kPa sealing
Two-piece ratchet teeth ensures nozzle alignment
Optional factory installed check valve
100% Virgin material used
Reinforced ribbed body
Compatible with all industry-standard female
thread nozzles
OPERATING DATA
Factory installed check valve: 2.9 m/hd @ 120kPa
LX4PRS30 LX6PRS30
with side - inlet
DIMENSIONS
½" FEMALE THREADED INLETS
Model
Body Height
LX4PRS30
6 ¼"
15.9 cm
LX6PRS30
8 ½"
21.6 cm
Exposed Cover
2 ¼"
5.7 cm
LXPRS Spray Specification
LX-NP
Non-potable cover
Product Code
Model
Pop-up Height
LX4PRS30-CV
4"
10 cm
1522682
LX6PRS30-CV
6"
15 cm
1522668
LX-NP
1522681
Snap-on cover
SPRAYS
LXAAN
Weathermatic’s Adjustable Arc nozzle series (AAN) offers easy
grip-and-turn adjustment, wet or dry. Exceptional uniform coverage.
Flows increase or decrease proportionately with radius adjustment
to maintain matched precipitation rates (MPR) between arcs within
a radius.
SPECIFICATIONS
FEATURES
OPERATING DATA
• Insert a coin in adjustment slot to easily set arc
range from 0 – 360°
• Precipitation Rate: 30 – 146 mm per hour
• Pressure: 140 - 280 kPa
• Fits LX Series Sprinklers and all industry standard
sprayheads with male thread risers
• Color-coded for easy identification
• Stainless steel radius adjustment screw
• Screens and adjustment coin included with nozzles
• Reusable, dual compartment resealable bags for
organizing nozzles and strainers
LX ADJUSTABLE ARC NOZZLE SPECIFICATION
METRIC
Model
Radius
mm/hr
8A
2.4 – 2.7 m
108.46 – 132.84
10A
3.0 – 3.4 m
70.1 – 87.12
12A
3.7 – 4.0 m
35.81 – 39.12
15A
4.3 - 4.9m
32.26 – 36.07
17A
4.6 - 5.2m
31.50 – 41.66
EASY ARC ADJUSTMENT
WITH A COIN OR BY HAND
LX ADJUSTABLE ARC NOZZLES // METRIC
Nozzle 8A
Trajectory: 0˚
Code: 1522670
Pressure
kPa
Radius
m
45°
138
2.4
2.17
3.0
2.17
3.7
172
2.4
2.33
3.0
2.50
3.7
207
2.4
2.50
3.0
2.83
3.7
241
2.7
2.67
3.4
3.00
4.0
276
2.7
3.00
3.4
3.33
138
2.4
3.17
3.0
120°
180°
240°
270°
360°
Radius
m
Flow
L/min
Nozzle 12A
Trajectory: 15˚
Code: 1522672
Arc
90°
Flow
L/min
Nozzle 10A
Trajectory: 5˚
Code: 1522671
Radius
m
Flow
L/min
Nozzle 15A
Trajectory: 30˚
Code: 1522673
Nozzle 17A
Trajectory: 30˚
Code: 1522674
Radius
m
Flow
L/min
Radius
m
Flow
L/min
1.83
4.3
2.00
4.6
2.67
2.33
4.3
2.17
4.9
3.00
2.50
4.6
2.50
4.9
3.33
2.67
4.6
2.67
5.2
3.67
4.0
2.67
4.9
2.83
5.2
4.17
3.50
3.7
2.83
4.3
2.67
4.6
3.33
172
2.4
3.33
3.0
3.83
3.7
3.50
4.3
3.00
4.9
4.00
207
2.4
3.67
3.0
4.17
3.7
3.83
4.6
3.33
4.9
4.33
241
2.7
3.83
3.4
4.50
4.0
4.17
4.6
3.50
5.2
4.67
276
2.7
4.33
3.4
4.83
4.0
4.33
4.9
3.83
5.2
5.00
138
2.4
3.33
3.0
4.17
3.7
3.33
4.3
3.33
4.6
4.17
172
2.4
4.33
3.0
5.00
3.7
4.00
4.3
3.67
4.9
4.67
207
2.4
4.67
3.0
5.33
3.7
4.33
4.6
4.17
4.9
5.17
241
2.7
5.17
3.4
5.67
4.0
4.67
4.6
4.50
5.2
5.50
276
2.7
5.33
3.4
6.00
4.0
5.00
4.9
4.67
5.2
5.83
138
2.4
5.17
3.0
5.50
3.7
4.67
4.3
5.33
4.6
5.67
172
2.4
5.50
3.0
6.17
3.7
4.83
4.3
5.83
4.9
6.17
207
2.4
6.17
3.0
6.67
3.7
6.00
4.6
6.33
4.9
6.83
241
2.7
6.67
3.4
7.00
4.0
6.50
4.6
6.50
5.2
7.50
276
2.7
7.00
3.4
7.67
4.0
7.00
4.9
6.83
5.2
8.00
138
2.4
6.50
3.0
7.17
3.7
5.50
4.3
6.67
4.6
7.50
172
2.4
7.50
3.0
8.00
3.7
6.17
4.3
7.50
4.9
8.33
207
2.4
8.33
3.0
8.67
3.7
6.83
4.6
8.33
4.9
9.17
241
2.7
9.17
3.4
9.50
4.0
7.33
4.6
9.17
5.2
10.17
11.00
276
2.7
9.67
3.4
10.17
4.0
8.17
4.9
9.83
5.2
138
2.4
7.00
3.0
7.50
3.7
5.83
4.3
7.17
4.6
8.33
172
2.4
8.00
3.0
8.50
3.7
6.50
4.3
8.33
4.9
9.83
207
2.4
8.50
3.0
9.33
3.7
7.33
4.6
9.17
4.9
10.67
241
2.7
9.17
3.4
10.17
4.0
8.00
4.6
9.83
5.2
11.33
276
2.7
10.00
3.4
11.33
4.0
8.67
4.9
10.67
5.2
12.17
138
2.4
8.33
3.0
8.67
3.7
6.33
4.3
9.17
4.6
9.83
11.00
172
2.4
9.50
3.0
9.83
3.7
7.17
4.3
9.83
4.9
207
2.4
10.83
3.0
10.83
3.7
8.00
4.6
11.00
4.9
12.17
241
2.7
11.33
3.4
11.83
4.0
8.67
4.6
12.17
5.2
12.83
276
2.7
12.17
3.4
12.83
4.0
9.17
4.9
13.17
5.2
14.00
SPRAYS
SPECIFICATIONS - BRASS NOZZLES
FEATURES
• Milled brass design provides best available uniform precipitation for water,
material and labor savings in a professional design. Arcs and angles for
any landscape requirement. Reinforced border spraying combines with
an extremely flat slope of distribution to eliminate the requirement for
“head-to-head” coverage. B Series nozzles provide a minimum of 6mm
per hour precipitation at one foot from listed radius.
• B Series nozzles fit LX sprayheads, as well as all industry
standard male thread risers
FULL
CIRCLE
PART
CIRCLE
• Low minimum operating pressure of 140 kPa
STRIP NOZZLES
TYPICAL PLASTIC
NOZZLE UNIFORMITY
B SERIES UNIFORMITY
NOZZLE WITH
SCREEN
BRASS NOZZLE
ADAPTER
1522573
½" IPS
B SERIES STRIP NOZZLES
Arc
EST
CST
SST
Code
1522575
1522578
1522581
B SERIES DESIGN NOTES
B10
METRIC
kPa
L/min
W + L (m)
140
1.17
1.2 x 2.4
170
1.50
1.2 x 2.7
210
1.83
1.2 x 3.0
140
2.67
1.2 x 4.8
1.2 x 5.5
170
3.00
210
3.33
1.2 x 6.1
140
2.67
1.2 x 4.8
170
3.00
1.2 x 5.5
210
3.33
1.2 x 6.1
Many designers derate recommended spacing for climate
and wind. Listed radius is determined by ASAE industry
standard measurement of 2.5mm per hour.
Precipitation: 25 mm per hour for full circle / 140 kPa
at maximum triangular spacing.
MATCHED PRECIPITATION
Max Spacing
Arc
Model
B10
3.0 m
kPa
Code
L/min
B15
4.4 m
radius
140
360°
F
Code
L/min
radius
Code
L/min
1522676
9.17
3.3
1522596
15.83
3.9
10.17
3.6
18.17
4.2
11.33
3.6
20.00
4.5
5.33
3.3
6.00
3.6
6.83
3.6
2.67
3.3
3.00
3.6
3.33
3.6
9.17
3.3
9.83
3.6
11.00
3.6
3.83
3,3
170
210
140
180°
H
1522584
170
210
140
90°
Q
1522585
170
210
140
270°
TQ
1522583
170
210
T
2.4
2.67
2.4
2.67
2.7
1.17
2.4
1.50
2.4
1.50
2.7
3.33
2.4
3.83
2.4
1522677
1522679
1522678
4.17
2.7
1.50
2,4
170
1.83
2,4
4.17
210
2.33
2,7
4.50
140
120°
2.33
1522675
B20
6.0 m
1522680
1522598
1522600
1522597
1522599
radius
9.17
3.9
10.17
4.2
11.00
4.5
4.50
3.9
5.33
4.2
5.67
4.5
14.33
3.9
16.33
4.2
17.83
4.5
6.00
3,9
3,6
6.83
4,2
3,6
7.50
4,5
W
B10 nozzles are 15˚ trajectory B15 and B20 are 30˚ trajectory
ROTORS
Visit www.reece.com.au/weathermatic for a demonstration of the quick and easy turn adjustment.
TURBO ROTARY SPRINKLER
Consider 10 Reasons why the Turbo is the Smart Solution!
1
• Factory pre-set at 180°
• Vandal-resistant slip clutch and strong sonic weld
prevent breakage as is common with other brands
2
3
3
WIDEST RANGE RACK
• 14 nozzles in one tree, 7.0m - 18.6m
• Includes 4 SmartAngle (low angle) and 2 Flow+
nozzles to provide 25mm rotor range in a 20mm body
• Factory pre-installed nozzles available
• Sonic weld
4
4
5
HI TECH, SELF-CLEANING MICRO FILTER
• 20 micron filter originally developed for the medical
industry protects reversing mechanism from dirt
and debris
5
PRESSURE-ACTIVATED WIPER SEAL
• Superior material and size provides extreme reliability
in sandy conditions
6
• 10-year rated seal exceeds 6000 cycles of
performance
• Pops up and seals below 138kPa
6
7
8
9
10
HEAVY-GAUGE SPRING FOR
POSITIVE RETRACTION
• 9kg of force vs. 4.5kg for the competition
7
READY-CHECK™ CHECK VALVE
• There when you need it at no added cost
• Holds up to 3.7m of elevation to prevent
low head drainage
1
DOUBLE-THICK RUBBER COVER
• The beefiest in the business to protect the head and
the customer
8
• Verifies rotation, rotation speed and reversing action
on every sprinkler
• Visible “+” and “–” arrows guide arc adjustment
• Surrounded by a ribbed screw-on cover for a sure
grip in wet conditions
9
2
TOTALLY TOOL-LESS ARC ADJUSTMENT
• Ratchets like a spray head to align arc. No channel
locks required.
FIVE YEAR WARRANTY
“NO QUESTIONS ASKED”
• Return rate of less than 2%
• Arc adjustment ring has visible arc indicators for
easiest “dry” adjustment – just grip the ring and dial
it in!
• Wet set “point and shoot” adjustment without a tool is
the fastest in the business. Just hold the ring and turn
the top.
100% WATER TESTED
• 20 years of proven performance
10
AMAZING VALUE
• Commercial sprinkler performance, strength and value
• Try the entire Turbo Series and experience the Turbo
difference!
T1Turbo ROTARY SPRINKLER
T1 PERFORMANCE
SPECIFICATIONS
METRIC
FEATURES
Nozzle
Pressure
kPa
STANDARD ANGLE
• Thick, vandal resistant rubber cover is standard;
visible arrows indicate + or – arc adjustment
0.75
• Radius adjustment screw decreases radius up
to 25%
• “Punch-thru” cover to protect nozzle retaining screw
from debris
1
• Easy-grip threaded cover
• 8 field-changeable nozzles
• Safety clutch for vandal protection; ratchets like
a sprayhead
1.5
• Adjustable arc from 40-360 degrees
• Pressure activated wiper seal and strong stainless
steel spring on pop-up models to ensure positive
retraction
2
• High-tech micro filter protects reversing mechanism
2.5
• Streamlined large flow tube to minimize pressure loss
through sprinkler
• Impeller flow regulator automatically matches rotation
to nozzle selection
3
• Smooth impeller gear drive for highly uniform watering
• Large area, basket type, removable strainer
for debris protection
4
• Optional check valve holds back 3.7 m/hd
of elevated water
CONSTRUCTION
5
• High-strength non-corrosive plastics and metals used
throughout sprinkler
• Sealed, lubricant packed drive housing provides long
life performance
Radius
m
Flow
L/min
Precip.
mm/hr
Precip.
mm/hrp
18° TRAJECTORY
210
4.88
2.16
11
13
280
5.18
2.50
11
13
340
5.18
2.83
13
15
210
5.18
2.83
13
15
280
5.79
3.33
12
13
340
6.40
3.83
11
13
210
6.10
4.67
15
17
280
6.40
5.33
16
18
340
6.71
5.83
15
18
15
210
7.01
5.33
13
280
7.62
6.50
13
15
340
8.23
7.67
13
15
210
8.53
6.83
11
13
280
9.75
8.50
11
12
340
10.36
9.67
11
12
210
9.14
8.83
13
14
280
10.36
10.67
12
14
340
10.67
11.50
12
14
210
9.45
12.33
16
19
280
10.97
15.00
15
17
340
11.28
15.33
14
17
210
10.06
15.67
18
21
280
11.28
18.83
18
20
340
12.19
21.17
17
19

Square spacing based on 50% of diameter
Triangular spacing based on 50% of diameter
Note: All precipitation rates are calculated for 180° operation.
p
OPTIONS (FACTORY INSTALLED)
• Non-potable cover (add “N” suffix)
MODEL SPECIFICATION
T1
T1-36
Pop-up adjustable arc - 1522566
Pop-up full circle - 1522567
T1 DIMENSIONS
Height (closed):
Pop-up Height:
Inlet:
15mm
19.4 cm
10.2 cm
OPERATING RANGE
METRIC
T1
Precipitation Rate
12 – 16 mm per hour @ 280 kPa
Discharge Rate
2.16 – 20.8 L/min
Radius
4.8 – 12.2m
Pressure Range
170 – 345kPa
ROTORS
T3/35Turbo ROTARY SPRINKLER
SPECIFICATIONS
FEATURES
CONSTRUCTION
• Radius adjustment screw decreases radius up to 25%
life performance
from debris
• Easy-grip threaded cover
• Non-potable cover
• 14 field-changeable nozzles – SmartAngle (low angle)
and Flow+ included
MODEL SPECIFICATION
• Part circle models adjust from 40 – 360°; no tools required
T3, T35 Pop-up adjustable arc
T3-36, T35-36
Pop-up full circle
T3SS, T35SS
Stainless steel pop-up adjustable arc
T3-36SS, T35-36SS
Stainless steel pop-up full circle
• Expanded “arc dwell” on part circle models provides full
coverage along borders
T3 DIMENSIONS
a sprayhead
• Pressure activated wiper seal and strong stainless steel
spring on pop-up models to ensure positive retraction
through sprinkler
• Impeller flow regulator automatically matches rotation
to nozzle selection
Height (closed):
Pop-up Height:
Inlet:
20mm
19.4 cm
10.2 cm
T35 DIMENSIONS
Height (closed): 22.4 cm
Pop-up Height:
10.2 cm
Inlet:
25mm
Exposed Top Diameter:4.4 cm
• Large area, basket type, removable strainer for debris
protection
• Standard Ready Check™ check valve on T3 and T35
models is easily reversed in the field to a “check” position.
Check valve holds back 3.7 m/hd of elevated water.
OPERATING RANGE
METRIC
Precipitation Rate
10 – 15 mm per hour
@ 350 kPa
Radius
7.0 – 18.6 m
Pressure
140 – 480 kPa
Flow
1.83 – 56.5 L/min
1522504
WM T3 Rotary Sprinkler
1522505
Adj PVC CV
360 PVC CV
1522500
Adj PVC CV N/Pot
1522501
360 PVC CV N/Pot
1522506
Adj S/S CV
1522507
360 S/S CV
1522502
Adj S/S CV N/Pot
1522503
360 S/S CV N/Pot
1522512
Adj PVC CV
1522513
360 PVC CV
1522508
Adj PVC CV N/Pot
1522509
360 PVC CV N/Pot
1522514
Adj S/S CV
1522515
360 S/S CV
1522510
Adj S/S CV N/Pot
1522511
360 S/S CV N/Pot
T3SS
T3 / T35 PERFORMANCE
METRIC
Nozzle
Pressure
kPa
Radius
m
Flow
L/min
Precip.
mm/hr
Precip.
mm/hrp
Standard Angle 26° Trajectory
1
210
280
340
410
8.5
9.8
10.1
10.1
2.65
3.03
3.41
3.79
4
4
4
4
5
4
5
5
1.5
210
280
340
410
9.4
10.7
11.0
11.0
3.79
5.30
6.06
6.81
5
5
6
7
6
6
7
8
2
210
280
340
410
8.5
10.7
10.7
10.7
4.54
5.30
7.19
8.71
7
6
8
9
9
6
9
11
3
210
280
340
410
9.1
11.6
11.9
12.6
6.44
7.57
9.08
10.60
9
7
8
8
11
8
9
9
3.5
280
340
410
12.5
12.8
13.1
13.25
14.01
16.28
10
10
11
12
12
13
4
280
340
410
13.4
13.7
14.0
15.14
16.28
18.93
10
10
11
12
12
13
6
280
340
410
13.7
14.0
14.3
20.82
23.85
26.12
13
15
15
15
17
18
8
280
340
410
13.7
14.3
15.5
23.85
28.39
30.66
15
17
15
18
19
18
SmartAngle 13° Low angle Trajectory
2.0LA
210
280
340
8.8
10.1
10.4
6.06
7.19
7.95
9
9
9
11
10
10
2.5LA
210
280
340
9.4
10.7
11.0
7.95
9.84
10.98
11
10
11
12
12
13
3.5LA
210
280
340
9.4
10.7
11.3
10.22
12.11
13.25
14
13
13
16
15
14
4.5LA
210
280
340
10.1
11.3
11.3
11.36
12.87
15.52
13
12
15
16
14
17
Flow+ nozzles 26° Trajectory
9
340
410
480
15.2
16.5
16.8
35.96
40.88
44.29
19
18
19
21
21
22
13
340
410
480
17.4
18.0
18.6
46.94
52.24
56.40
19
19
20
22
22
23
T3

Divide by 2 for full circle precipitation rates
p
ROTORS
TURBO
CT70 COMMERCIAL
ROTARY SPRINKLER
SPECIFICATIONS
FEATURES
CONSTRUCTION
• 5 year trade warranty and 100% water tested
• Radius adjustment screw decreases radius up to 25%
from debris
life performance
D)
• Non-potable cover
• Easy grip threaded cover
• 5 field changeable nozzles
MODEL SPECIFICATION
a sprayhead
CT70 Adjustable arc
CT70-36 Full circle
CT70SS Stainless steel pop-up adjustable arc
CT70SS Stainless steel pop-up full circle
• Part circle models adjust from 40 – 360°;
no tools required
• Expanded “arc dwell” on part circle models provides
full coverage along borders
• Pressure activated wiper seal and strong stainless steel
spring on pop-up models to ensure positive retraction
DIMENSIONS
Height (closed): 22.4 cm
Pop-up Height:
10.2 cm
Inlet:
25mm
Exposed Top Diameter:
4.4 cm
through sprinkler
• Impeller flow regulator automatically matches flow
to nozzle selection
• Large area, basket type, removable strainer for debris
protection
• Standard Ready Check™ check valve on CT70 and
CT70-36 models is easily reversed in the field to a
“check” position. Check valve holds back 4.6 m/hd
of elevated water
CT70 NOZZLES
OPERATING RANGE
1522516
WM CT70 Rotary Sprinkler
CT70SS
Adj
PVC
1522517
360 PVC
METRIC
1522518
Adj S/S
Precipitation Rate
15.8 – 27 mm per
hour @ 420 kPa
1522519
360 S/S
Radius
14.9 – 22.6 m
1522520
Adj PVC Nonpot
1522521
360 PVC Nonpot
1522522
Adj S/S Nonpot
1522523
360 S/S Nonpot
Pressure
280 kPa - 620 kPa
Flow
30.67 - 106 L/min
POINT AND SHOOT
ARC ADJUSTMENT
WITHOUT TOOLS
Closed-case, gear-driven rotors rated for athletic fields, parks,
and large turf areas.
CT70 PERFORMANCE
METRIC
Nozzle
71
72
73
74
75

p
Pressure
kPa
Flow
L/min
Radius*
m
Precip.
mm/hr
Precip.
mm/hrp
280
30.66
14.9
17
19
340
34.45
15.5
17
20
420
37.85
16.2
17
20
480
41.64
16.8
18
20
550
44.67
17
19
21
340
40.50
16.5
18
21
420
44.67
16.8
19
22
480
47.70
17.4
19
22
550
52.24
17.7
20
23
340
53.00
17.4
23
27
420
57.92
17.7
24
28
480
63.59
18.3
24
28
550
67.38
18.6
22
25
420
62.84
18
23
27
480
68.52
18.9
23
27
550
72.68
19.2
24
27
620
77.22
19.8
24
27
420
77.98
20.4
25
28
480
85.17
20.4
27
31
550
91.61
21.9
25
29
620
98.04
22.6
25
29
* Radius of coverage shown is for still air with no diffusion.
Maximum radius reduction with diffuser screw is 25%.
Divide by 2 for full circle precipitation rates
Nozzle trajectory: 26°
Performance data derived from tests that conform to ASAE
Standard S398.1.
Uniform precipitation data developed with Hyperspace™ Software
is available upon request.
CT70
STATEMENT OF TRADE WARRANTY
10 YEARS
11000CR solenoids
5 YEARS
Rotors, spray equipment, nozzles
3 YEARS
SmartLine (SL1600 and SL4800) and ProLine (PL1604 and PL1608) controllers.
2 YEARS
N-100 and 12000 Series valves; all other catalogued products not specifically listed, or under the 5 or 10 year extended warranties.
All trade warranties are effective from the original date of manufacture. The trade warranties extend only to the original professional
installer of the Weathermatic products and do not extend to repairs, replacements or adjustments of Weathermatic products due
to misuse, negligence, alteration, modification, tampering or improper installation and maintenance of the product and/or system.
Contact your local Weathermatic authorized distributor for all warranty claims. Weathermatic’s obligation is to repair or replace
its products found to have defects in material or workmanship. There are no other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Weathermatic will not be liable to any party in strict liability,
tort, contract or any other manner for damages caused or claimed to be caused as a result of any design or defect in
Weathermatic’s products, or any special incidental or consequential damages of any nature.
PRODUCT CHANGES
Weathermatic reserves the right to alter, modify or redesign its products, pricing and warranty at all times without creating
any liability for the obsolescence of customer inventory of such parts or products.
ASAE CERTIFICATION STATEMENT
Weathermatic certifies that pressure, flow rate and radius data for these products were determined and listed in accordance with
ASAE Standard S398.1, Procedure for Testing and Performance Reporting, and are representative of performance of production
sprinklers at the time of publication. Actual product performance may differ from the published specifications due to normal
manufacturing variations and sample selection.
Reece. Works for you.™
Call 1800 032 566 or visit www.reece.com.au/irrigation for your nearest Reece store.
The information provided in this brochure is provided as a guide only. Reece Pty Ltd does not warrant or accept liability in relation to the accuracy of this information.
Individual users should make their own assessment of the information provided. Reece Pty Ltd reserves the right to change specifications, designs and availability
without prior notice. Due to limitations in the printing process the colours in this brochure are a guide only. Reece Pty Ltd accepts no responsibility for possible errors
or omissions. The use of the information in this brochure is subject to the terms and conditions which are located on the Reece website being www.reece.com.au
V4 (BROCHURE CODE 2130464)