collar - Viatek Catalogs

model BC36
other Bark Stop products include:
D.
turn 1/4 turn
counterclockwise
Silver
tab
battery compartment screw
E.
REPLACING THE BATTERY: The
battery compartment is located on the
back of the unit. ( see parts diagram). To
replace the battery turn the battery
compartment screw on quarter turn in a
counterclockwise direction. Take out the
old batteries and replace with two new
CR1130 batteries. Batteries must be
placed in the unit with the flat side of each
battery touching, this isde is marke dwith
a “ + ” sign, for the unit to work.
WATERPROOF
BARK STOP
COLLAR
Note: BEFORE INITIAL USE THE
SMALL SILVER TAB, LOCATED TO
THE BOTTOM LEFT OF THE BATTERY
COMPARTMENT, MUST BE REMOVED
FOR THE UNIT TO WORK. Two new
CR1130 batteries are included with
this unit.
Super Bark Stop
Proffessional
Bark Stop
Portable
Bark Stop
LED INDICATOR: The LED indicator is
located on the front of the unit. (see parts
diagram). The red LED indicator will light
when the unit is activated. This will help
in making sure the unit is working even in
ultrasonic mode.
viatekproducts.com
888-7VIATEK
WARNING:
Disassembly of the electronic components within
this unit may result in exposure to lead in the form
or a solder , which is known to to state of California to
cause cancer, birth defects and other reproductive harm.
407.248.0123
3
Operation
PARTS DIAGRAM:
Placing collar on dog: Simply adjust collar to
appropriate size for your dog and either slide over
your dogs head or unfasten the clip place on dog
and fasten clip again. (see diagram A.)
Dear Valued Customer,
ON/OFF: Turns the unit on and off.
adjustable
collar
For operational questions or replacement parts
please call: 888-7VIATEK or contact your local
VIATEK dealer.
bark
stop
unit
Visit us on the web at www.viatekproducts.com for
new product updates and information. Also please
email us with any comments or questions at
[email protected]
We look forward to serving you, now and in the
near future.
LED indicator
HIGH: Setting the collar on this setting will set the
sensitivity of the unit at a higher setting. On this
setting a softer bark will cause the unit to activate.
There are 4 high levels. Just press the high button
the corresponding number of times for desired
level.
LOW: Setting the collar on this setting will set the
sensitivity of the unit at a lower setting. On this
setting a more aggressive bark will cause the unit
to activate. There are 4 Low levels. Just press the
high button the corresponding number of times for
desired level.
B.
AUDIBLE: Setting the collar to this setting will
allow everyone to hear the unit activate. This
setting is recommended for testing.
control panel
Kelli M. Lentine
Kelli M. Lentine
President
A.
Control Panel (see diagram B.)
Thank you and congratulations on your purchase
of this innovative product. We back our product
with a Viatek certified warranty. Your satisfaction
is very important to us.
Enjoy your Viatek Designed Product!
Directions for Use
Note: do not hold unit to ear when testing,
stand at a safe distance.
battery compartment screw
(2 CR1130 batteries included)
888-7 VIATEK
collar brace
viatekproducts.com
888-7VIATEK
407.248.0123
1
ULTRASONIC: Setting the collar to this setting will
allow only your dog to hear the unit activate. This
setting is recommended for daily use. Unit will
beep so dog owner knows the unit has been
activated.
viatekproducts.com
888-7VIATEK
407.248.0123
2