hand tools - Howard Supply NY

Comments

Transcription

hand tools - Howard Supply NY
HAND TOOLS
HAMMERS
HAM ERS
MEHAMR-S
Maasdam-Dead On/Hart
Rubbermaid® Tough Tools™ Claw Hammer - Durable,
lightweight, fiberglass handle. Rubberized ergonomic grips for greater
comfort and control.
The Decker Hammer - Drop-forged steel head, induction
heat-treated and tempered. Fully polished to a mirror-like
finish. Weight of hammer head is
distributed through the centerline of
handle providing a balanced swing in
both directions. 15" hickory handle.
21 oz. smooth face.
Product
No.
Mfg.
No.
Description
343196-C
D-21S
21oz Decking Hammer
Order
Mult.
Weight
1/0/4
2.000
Unit
Cost
29.99 EA
HAM ERS
The Woody® Hammer - Advanced head design is a precision
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
307607-A
307616-A
70300
70301
7 oz.
16 oz.
1/4/32
1/4/24
1.100
1.833
Unit
Cost
5.99 EA
7.99 EA
HAM ERS
DIB Tool Imports
Fiberglass Handle Hammer - 16 oz. fully polished, drop-forged
steel head. 13" handle with rubber grip.
casting S-7 tool steel, and it features magnetic nail starter.
Unique to the Woody®, however, is the patent pending
Strongback™ Handle Reinforcement System. The
Strongback™ is mechanically interlocked between the
Woody® head and handle creating a dramatically
stronger handle with overstrike protection. By transferring
force from the wood handle to the steel head, handle
failures caused by pulling nails, wedging, and overstrike
are greatly reduced with the Strongback™ Handle
Reinforcement System.
Product
No.
Mfg.
No.
Description
358231-C
HW22SB
Woody Hammer
Order
Mult.
Weight
1/0/4
2.500
Unit
Cost
39.99 EA
HAM ERS
Maasdam-Dead On/Hart
Wood Hammer - 19" hickory handle. Milled face and magnetic nail
starter.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
310662-C
310670-C
310662
310670
Curved claw
Rip claw
1/6/36
1/6/36
1.807
1.807
Unit
Cost
6.49 EA
Product
6.49 EA No.
HAM ERS
356107-B
356301-B
Maasdam-Dead On/Hart
The Trimmer Hammer - 16 oz. drop- forged steel head, induction
heat-treated and tempered. Fully polished to a
mirror-like finish. Weight of hammer head is distributed
through the centerline of handle providing a balanced
swing in both directions. 14" hickory handle.
Product
No.
Mfg.
No.
Description
343137-C
T-16
16oz Wd/hdl Rip Hammer
Order
Mult.
Weight
1/0/4
1.500
Description
Order
Mult.
Weight
DO21C
DO24
21 oz. curved handle
24 oz. straight handle
1/0/12
1/0/12
2.333
2.417
Unit
Cost
29.99 EA
32.99 EA
HAM ERS
Maasdam-Dead On/Hart
Framer’s Hammer - Hart California Special™ framer’s hammer
features an extra long curved handle grip for comfort and
durability, a double barrel wedge to hold head securely to
handle. Handle length 19". Milled face.
Unit
Cost
Product
21.99 EA No.
372579-C
372587-C
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
Mfg.
No.
Mfg.
No.
Description
CS-21
CS-25
21 oz.
24 oz.
Order
Mult.
Weight
1/0/4
1/0/4
2.250
2.250
Unit
Cost
34.99 EA
37.99 EA
10-1
HAND TOOLS
Maasdam-Dead On/Hart
HAND TOOLS
HAMMERS
HAM ERS
HAMER S
Wood Handle Hammer - Full polished forged head, octagon neck.
Tested red hickory handle provides 2 grip positions.
Permabond® keeps handle tight.
Steel Handle Hammer - Antivibe™ III. High-carbon polished steel
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
300150-B
300141-B
300258-B
11-438
11-436
11-440
13 oz. claw, 12-1/2" long
16 oz. claw, 13" long
16 oz. rip, 13" long
1/6/24
1/6/24
1/6/24
1.250
1.458
1.458
14.99 EA
14.99 EA
14.99 EA
357758-B
394637-B
357979-B
394343-B
394351-B
396966-B
51-941
51-942
51-943
51-944
51-946
51-947
16 oz. claw, smooth face
16 oz. rip, smooth face
20 oz. claw, smooth face
20 oz. rip, smooth face
22 oz. rip, smooth face
22 oz. milled face
1/4/24
1/4/24
1/4/24
1/4/24
1/2/12
1/6/12
1.933
1.917
2.096
2.083
2.500
2.500
Cooper Tools
head. Rip claw. Patented shank materials designed to
reduce vibrational energy generated
during repetitive hammering.
Comfort-grip is designed to reduce slip
and feel comfortable, as well as secure
multiple grip positions.
HAM ERS
Cooper Tools
Fiberglass Handle Hammer - Full polished forged face and neck.
Claw hammers have octagon shaped neck and bell. Ripping hammers
have octagon shaped neck and round shaped bell.
Nonbreakable red fiberglass handle. Black molded
dura-cushion grip. Permabond® keeps handle tight.
Product
No.
Mfg.
No.
315982-B
309794-B
340651-B
309785-B
340642-C
314653-C
307689-C
11-403
11-402
11-415
11-400
11-414
11-416
11-417
Description
13 oz. claw, 12-1/2" long
16 oz. claw, 13" long
16 oz. rip, 13" long
20 oz. claw, 13-1/2" long
22 oz. rip, 13-1/2" long
22 oz. rip, heavy, 15" long
22 oz. rip, heavy milled face,
15" long
Order
Mult.
Weight
1/4/24
1/4/24
1/4/24
1/4/24
1/4/24
1/4/24
1/4/24
1.458
1.750
1.750
2.000
2.125
2.300
2.125
Unit
Cost
22.99 EA
22.99 EA
25.99 EA
25.99 EA
29.99 EA
29.99 EA
HAMER S
Wood Handle Hammer - Curved claw. High-carbon steel head with
black finish and polished bell face. Hickory handle.
Unit
Cost
15.99 EA
15.99 EA Product
15.99 EA No.
17.99 EA 337684-C
19.99 EA 386138-C
21.49 EA 308692-C
22.99 EA 386111-C
Mfg.
No.
Description
Order
Mult.
Weight
51-613
51-713
51-616
51-716
7 oz. claw, 11-1/2"
13 oz. claw, 13"
16 oz. claw, 13-1/4"
16 oz. rip, 13-1/4"
1/6/24
1/0/6
1/0/6
1/0/6
.800
1.525
1.442
1.525
Unit
Cost
7.79 EA
7.99 EA
7.99 EA
7.99 EA
HAMER S
HAM ERS
Cooper Tools
Steel Handle Hammer - Antishock solid steel hammers provide less
fatigue. Forged 1-piece solid steel hammer. Dual
material contoured grips add
exceptional comfort and control.
High-luster, full polished finish.
Designed for professionals.
Product
No.
Mfg.
No.
319686-C
319724-C
317098-C
319775-C
317497-C
339716-C
SS16C
SS16R
SS20R
SS22R
SS22RCF
SS28RCF
Description
Order
Mult.
Weight
16 oz. claw
16 oz. rip
20 oz. rip
22 oz. rip
22 oz. rip, milled face
28 oz. rip, milled face
1/4/24
1/4/24
1/4/24
1/4/24
1/4/24
1/4/24
1.650
1.650
1.850
2.090
2.090
2.300
Fiberglass Handle Hammer - Forged head, vinyl grip fiberglass
handle. 16 oz. 13-1/4" overall length.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
348145-B
348154-B
51-110
51-518
Claw
Rip
1/6/24
1/6/24
1.654
1.658
Unit
Cost
21.49 EA
21.49 EA
23.99 EA
29.99 EA
29.99 EA
32.99 EA
HAMER S
Graphite Handle Hammer - Graphite core provides strength and
durability. Has the feel of wood but with overstrike
protection. High carbon. Polished steel
head is precisioned balanced. New
ribbed grip handle allows air to cool
hand and channel sweat away.
Patented head-to-handle assembly.
Flared grip end prevents hammer from
slipping off hand. 13-1/4" long.
Product
No.
Mfg.
No.
357707-B
51-505
Continued Next Column
10-2
Unit
Cost
19.99 EA
19.99 EA
Description
Order
Mult.
Weight
16 oz. claw
1/4/24
1.778
Unit
Cost
21.49 EA
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
HAMMERS
Continued From Previous Column
HAM ERS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
357715-B
357723-B
357731-B
51-506
51-507
51-508
16 oz. rip
20 oz. claw
20 oz. rip
1/4/24
1/4/24
1/4/24
1.778
2.180
2.180
Unit
Cost
21.49 EA
25.99 EA
25.99 EA
Steel Handle Hammer - Forged 1-piece head-handle of tool steel.
Blue nylon vinyl, Shock Reduction Grip™ is
ergonomically correct to reduce
vibration. Absorbs all shock.
HAM ERS
Vaughan-Bushnell
California Framing Wood Handle Hammer - Design based
Product
No.
Mfg.
No.
Description
368555-B
316415-B
CF2
CF1
19 oz., 16" handle
23 oz., 17" handle
Order
Mult.
Weight
0/0/1
1/0/4
1.750
2.250
Product
No.
Mfg.
No.
301015-C
300089-C
323180-C
311073-B
301033-B
326542-C
E3-12S
E3-16C
E3-16S
E3-20C
E3-20S
E3-22S
330546-B
E3-22SM
319414-C
E3-28S
305855-C
E3-28SM
332887-C
E3-30SM
Unit
Cost
Description
12 oz. rip, 10-3/4" long
16 oz. claw, 13-1/8" long
16 oz. rip, 13" long
20 oz. claw, 13-3/4" long
20 oz. rip, 13-5/8" long
22 oz. rip, smooth face, 15-3/
4" long
22 oz. rip, milled face, 15-3/
4" long
28 oz. rip, smooth face, 16"
long
28 oz. rip, milled face, 16"
long
30 oz. rip, milled face, 16"
long
Order
Mult.
Weight
1/4/48
1/4/48
1/4/48
1/4/48
1/4/48
1/4/36
1.313
1.750
1.750
1.958
1.958
2.222
33.49 EA
29.99 EA
29.99 EA
31.99 EA
31.99 EA
43.99 EA
Unit
Cost
1/4/36
2.222
39.99 EA
1/4/36
2.444
47.99 EA
1/4/36
2.444
48.99 EA
1/4/20
2.800
52.99 EA
HAM ERS
22.99 EA
25.99 EA
HAM ERS
Vaughan-Bushnell
Steel Handle Hammer - Forged 1-piece head and handle of tool
steel. Leather covered handle. 12-1/4" overall length. 16 oz.
California Framing Fiberglass Handle Hammer - Smooth
swept claw. 21 oz. head. Polished head and claws. High-carbon steel,
fiberglass handle with cushion-grip. Milled
face.
Product
No.
Mfg.
No.
Description
361372-B
CF21FG
21oz Fbr/hdl Fram Hammer
Order
Mult.
Weight
1/0/4
1.917
29.99 EA
Vaughan-Bushnell
FS999ML
368547-B
FS999
304476-C
FS505M
Description
20 oz., 16" handle, milled
face
20 oz., 14" handle, smooth
face
24 oz., 17" handle, milled
face
Save time by letting us locate those
hard-to-find items for you!
Order
Mult.
Weight
300944-C
300953-C
E16C
E16S
Claw
Rip
1/4/48
1/4/48
1.500
1.500
Unit
Cost
34.99 EA
34.99 EA
HAM ERS
design puts the power and weight up front for easy nailing. Continuous
face-to-claw radius for easy nail pulling. Fiberglass handle
is manufactured with a new strength not available in any
other fiberglass hammer. Both shock reduction gasket
and comfort grip are molded on for years of hard work and
dependability. Large overstrike protection.
fiberglass handle absorbs shock, offers super balance.
304484-B
Description
Weight Forward™ Fiberglass Hammer - Weight forward
Fiberglass Handle Hammer - Framing head. Hollow core
Mfg.
No.
Mfg.
No.
Unit
Cost
HAM ERS
Product
No.
Product
No.
Product
No.
Mfg.
No.
Unit
Cost
315288-B
WF17
1.958
26.99 EA
315297-B
WF17LM
0/0/1
2.000
22.99 EA
342084-B
WF21
1/0/4
2.333
39.99 EA
342092-C
WF21L
342106-B
WF21LM
Order
Mult.
Weight
1/0/4
Description
17 oz., 14" handle, smooth
face
17 oz., 16" handle, milled
face
21 oz., 14" handle, smooth
face
21 oz., 16" handle, smooth
face
21 oz., 16" handle, milled
face
Order
Mult.
Weight
Unit
Cost
1/2/12
1.800
37.99 EA
1/2/12
2.250
41.99 EA
1/2/12
2.167
39.99 EA
1/2/12
2.500
41.49 EA
1/2/12
2.500
42.99 EA
10-3
HAND TOOLS
on popular rig builder’s hatchet. Smooth swept claws similar to 999 rip
hammer. Cross-section where handle joins head
provides strength needed with long handle. Head and
claws polished high-carbon steel. White hickory handle.
Mill faced.
HAND TOOLS
HAMMERS
HAM ERS
SP ECAI LTY HAM ERS
Vaughan-Bushnell
Cooper Tools
Ball Peen Hammer - Hickory handle. Forged head. Gray finish on
Brick Hammer - Fiberglass handle with molded dura-cushion grip.
Forged head. Polished face, chamfer, bit and back.
Permabond® keeps handle tight.
head with polished face and peen.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301346-C
301355-C
301364-C
301373-C
301382-C
301391-C
S308
S2012
S016
S120
S224
S432
8 oz. head
12 oz. head
16 oz. head
20 oz. head
24 oz. head
32 oz. head
1/0/4
1/0/4
1/0/4
1/0/4
1/0/4
1/0/4
.750
1.125
1.438
1.813
2.000
2.500
Unit
Cost
15.79 EA
16.49 EA
17.49 EA
18.79 EA Product
No.
19.99 EA
21.49 EA 340697-C
340688-C
Mfg.
No.
Description
Order
Mult.
Weight
11-422
11-421
15 oz., 12-1/4" long
24 oz., 13" long
1/4/24
1/4/24
2.063
2.188
Unit
Cost
27.99 EA
29.99 EA
HAM ERS
Vaughan-Bushnell
SP ECAI LTY HAM ERS
Magnetic Tack Hammer - Hickory handle. Black paint over forged
steel. 1 face magnetized, other for driving.
Sure-lock fit. 5 oz., 11" long.
Product
No.
Mfg.
No.
Description
301603-C
SBP5
5oz Wd/hdl Tack Hammer
Order
Mult.
Weight
1/0/4
.563
Cooper Tools
Steel Brick Hammer - Antishock solid steel brick hammer provides
less fatigue. Forged 1-piece solid steel hammer. Dual
material contoured grips add
exceptional comfort and control.
High-luster, full polished finish. Sharp
cutting bit. Designed for professionals.
Unit
Cost
Product
10.79 EA No.
319791-C
SPECI ALTY HAMMERS
Vaughan-Bushnell
Mfg.
No.
Description
301952-C
SU7
7oz Upholstry Hammer
Order
Mult.
Weight
1/0/4
.625
SPECI ALTY HAMMERS
Cooper Tools
Order
Mult.
Weight
SS20BH
20oz Stl/hdl Hammer
1/4/24
1.840
Unit
Cost
24.99 EA
Vaughan-Bushnell
Brick Hammer - Hickory wood handle. Forged polished striking head,
sides and blade. Sharp cornered, square, flat
face for splitting brick. Plastic seal in eye to seal
out moisture and keep handle tight.
Unit
Cost
Product
17.99 EA No.
340599-C
302023-C
Brick Hammer - Red hickory wood handle. Forged black head,
Mfg.
No.
Description
BL16
BL24
16 oz., 11" long
24 oz., 11-1/2" long
Order
Mult.
Weight
1/0/4
1/0/4
1.375
2.000
Unit
Cost
27.99 EA
29.99 EA
SP ECAI LTY HAM ERS
polished face. Adze eye pattern. Permabond® keeps
handle tight. 11" long.
Brick Hammer - Steel handle. Forged 1-piece head handle design of
tool steel. Full polished. Revolutionary new
Bricklayers™ Grip features a super
tough nylon end cap. Perfect for all
tamping.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
300445-D
300436-D
11-492
11-491
15 oz.
24 oz.
1/6/24
1/6/24
1.583
1.958
10-4
Description
SP ECAI LTY HAM ERS
Magnetic Upholsterer’s Hammer - Hickory handle, flame
treated. Black smooth ground forged steel. 1 face magnetized, other for
driving. 7 oz., 11-1/4" long.
Product
No.
Mfg.
No.
Unit
Cost
Product
22.99 EA No.
24.99 EA 301088-C
Mfg.
No.
Description
E3-20BLC
20oz Stl/hdl Bric Hammer
Order
Mult.
Weight
1/0/4
1.896
Unit
Cost
39.99 EA
We can become your single-source supplier
on many of the products you currently use!
HAND TOOLS
*NUPLA
HAND TOOLS
*NU PLA
The product representations in this catalog are for reference only,
and are subject to change without notice.
10-5
HAND TOOLS
*NUPLA
*NU PLA
10-6
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
SPECIALTY HAMMERS
SPECI ALTYHAMMERS
SPECAI LTY HAMMERS
Vaughan-Bushnell
Rock Pick - Forged 1-piece head and handle of full polished tool steel. 8 Oz. Rawhide Mallet - Compressed under hydraulic pressure,
Blue nylon vinyl, Shock Reduction Grip™
is ergonomically correct to reduce
vibration. 22 oz.
Mfg.
No.
316946-C
E3-22P
Description
Order
Mult.
Weight
22oz Rock Pick
1/4/48
2.188
Unit
Cost
39.99 EA
SPECI ALTYHAMMERS
Vaughan-Bushnell
Drywall Hammer - Wood handle. Forged chrome plated head. Milled,
Product
No.
Mfg.
No.
Description
325171-C
RM175
8oz Rawhide Mallet
Order
Mult.
Weight
0/0/1
.625
Unit
Cost
18.99 EA
SPECAI LTY HAMMERS
V & B Mfg. Co.
Hickory Mallet - Head has a clear lacquer finish. Fine grade hickory.
Round head, plain face. 2-1/2" x 5-1/2". 16 oz.
crowned face. Sure-grip hickory handle. 12
oz., 13-1/2" long.
Product
No.
Mfg.
No.
Description
301792-C
WB
12oz Drywall Hammer
Order
Mult.
Weight
1/0/2
1.250
Unit
Cost
34.99 EA
SPECI ALTYHAMMERS
Drywall Hammer - Steel handle. Forged steel 1-piece head handle.
Full polished. Blue nylon vinyl, Shock Reduction
Grip™ is ergonomically correct to
reduce vibration. Crowned scored face
reduces breaking of face paper of
board. 14 oz. 13-1/2" overall length.
Product
No.
Mfg.
No.
Description
301408-D
301408
16oz Hickory Mallet
Order
Mult.
Weight
1/0/6
1.600
Unit
Cost
15.79 EA
SPECAI LTY HAMMERS
DIB Tool Imports
Rubber Mallet - Economy priced hand tool. Specially compounded
quality rubber for dead weight impact. Hardwood
handle.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
307548-E
307556-E
307610-E
307548
307556
307610
8 oz.
16 oz.
32 oz.
1/6/36
1/6/36
1/4/24
.612
1.225
2.296
Unit
Cost
1.79 EA
2.49 EA
4.29 EA
SPECAI LTY HAMMERS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301140-C
E3-11
14oz Drywall Hammer
1/4/48
1.542
Unit
Cost
41.49 EA
SPECI ALTYHAMMERS
Plastic Mallet - Wood handle. Plastic and rubber heads. Plastic head
Schacht-Pfister
Rubber Mallet - High-quality black rubber head. High-grade necked
shaped hardwood handle pressure forced
into rubber head to prevent
slippage or loosening of
head.
won’t absorb grease, water, oil, or dirt. Head is cross
pinned in select hickory handle.
Product
No.
Mfg.
No.
338101-C
35PM
338110-D
55PM
Description
8 oz., 9" handle, 1" x 3-1/2"
head
12 oz., 10-3/4" handle, 1-1/
4" x 3-5/8" head
Some products shown may need to be special ordered
for your convenience!
Order
Mult.
Weight
1/4/24
.625
10.99 EA
1/6/60
.750
12.49 EA
Product
No.
Mfg.
No.
Description
301417-D
301426-D
302416-D
2B
3B
4B
20 oz., 10-5/8" handle
28 oz., 13-1/2" handle
34 oz., 13-1/2" handle
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
1.458
2.167
2.417
Unit
Cost
10.79 EA
13.79 EA
16.99 EA
Unit
Cost
10-7
HAND TOOLS
Product
No.
seasoned for durability. Delivers firm blow from large
striking face. Nonmarring, for working on
sheet metal, copper, brass and other soft
materials. 1-3/4" face, 12" overall length.
HAND TOOLS
MALLET
MAL ET
SLED GES/ MAULS
Truper
Soft Face Hammer - Hickory wood handle. Steel head, plastic tips.
2-1/2 LB. Cross Peen Hammer - Forged from high-quality steel.
11-3/4" handle.
Hardened and tempered with black painted finish. Polished face.
16" fiberglass handle.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301630-C
301649-C
57-594
57-595
8 oz.
16 oz.
1/6/24
1/6/24
.750
1.292
Unit
Cost
22.49 EA
24.99 EA
SPECI ALTY HAMMERS
Product
No.
Mfg.
No.
Description
300374-D
CRP-2.5F
2-1/2lb Crosspeen Hammer
Order
Mult.
Weight
1/0/4
3.042
Unit
Cost
16.49 EA
SLED GES/ MAULS
Truper
2-1/2 LB. Engineer’s Hammer - Forged from high-quality steel.
Compo-Cast Hammer - Standard. Metal shots inside head combine
to provide maximum controlled striking force without
rebound. 1-piece urethane Uni-Cast
construction, reinforcing steel rod in
handle. Wraparound pattern for secure
grip. Soft face models for no mark, no
spark use.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Machined so that each face is identical and properly shaped.
Hardened and tempered. Black painted
finish with polished face. 16" fiberglass
handle.
Product
No.
Mfg.
No.
Description
300409-D
MD-2.5F-D
2-1/2lb Engineer Hammer
Unit
Cost
Order
Mult.
Weight
1/0/4
3.125
Unit
Cost
12.99 EA
SLED GES/ MAULS
345843-C
345932-C
375977-C
345950-C
57-530
57-531
57-532
57-533
10 oz., 10-1/8" overall length
18 oz., 11-1/4" overall length
21 oz., 12-7/8" overall length
42 oz., 14" overall length
1/0/12
1/0/24
1/0/4
1/4/12
.937
1.500
2.023
3.250
26.49 EA
32.49 EA
37.49 EA
52.99 EA
SPECI ALTY HAMMERS
Truper
Drilling Hammer - Steel handle. Forged steel 1-piece head handle.
Painted finish, polished face. Nylon vinyl cushion
grip. The proper tool for driving
hardened nails and cold chisels. 3 lb.
Drilling Hammer - High-carbon steel, heat-treated. Polished face. Top
grade handle. Import. 3 lb., 10" hickory wood handle.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301131-C
B3-3LB
3lb Drill Hammer
1/4/20
3.800
Unit
Cost
36.49 EA
SLED GES/ MAULS
Truper
Double Face Sledge - Red forged head with polished double faces.
Hickory handle. Shipped assembled. 16" hickory wood
handle.
Product
No.
Mfg.
No.
Description
310123-D
DHT3H-D
3lb Drilling Hammer
Order
Mult.
Weight
1/0/4
3.600
Unit
Cost
10.99 EA
SPECI ALTY HAMMERS
Truper
Cross Peen Hammer - High-carbon steel, heat-treated. Polished
Product
No.
Mfg.
No.
Description
300908-D
300962-D
MD3H-D
MD4H-D
3 lb.
4 lb.
Order
Mult.
Weight
1/0/4
1/0/4
3.313
4.500
Unit
Cost
10.99 EA
11.49 EA
face. Top grade handle. 3 lb., 16" hickory wood handle.
Product
No.
Mfg.
No.
Description
310131-D
CRP3H-D
3lb Cross Peen Hammer
10-8
Order
Mult.
Weight
1/0/4
3.600
Unit
Cost
11.99 EA
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
SLEDGES/MAULS
SLEDGES /MAU LS
SLEDGES/ MAULS
Truper
Truper
Do it™ Double Faced Sledge - Forged carbon steel with polished Square Head Splitting Wedge - Less handle. Drop-forged steel,
Product
No.
Mfg.
No.
Description
302434-D
302443-C
302452-C
373664-D
334367-C
366722-C
302434
302443
302452
373664
334367
366722
6 lb.
8 lb.
10 lb.
12 lb.
16 lb.
20 lb.
painted black.
Order
Mult.
Weight
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
1/0/4
1/0/4
1/0/4
1/0/2
1/0/2
1/0/2
6.000
8.000
10.000
13.500
17.500
22.000
18.99 EA
19.99 EA
24.99 EA
28.99 EA
35.99 EA
39.99 EA
302327-D
302336-D
302345-C
WG4-C
WG5-C
WG6-C
4 lb.
5 lb.
6 lb.
1/0/10
1/0/10
1/0/10
3.958
4.979
6.050
SLEDGES /MAU LS
Truper
Unit
Cost
8.49 EA
8.99 EA
10.49 EA
SLEDGES/ MAULS
Truper
Cutter Mattock - 5 lb. Excellent quality and workmanship. Fully
guaranteed. Black finish.
Wood Splitter Maul - Forged steel head. 34" wood sledge axe eye
hickory wood handle.
Product
No.
Mfg.
No.
Description
302041-D
TH5-D
5lb Cutter Mattock
Order
Mult.
Weight
1/0/6
4.958
Unit
Cost
10.79 EA
SLEDGES/ MAULS
Truper
Pick Mattock - 5 lb. Forged steel. Black finish.
Product
No.
Mfg.
No.
Description
305847-D
305839-D
TJ-6AH-D
TJ-8AH-D
6 lb.
8 lb.
Order
Mult.
Weight
1/0/4
1/0/4
5.600
7.200
Unit
Cost
21.49 EA
22.99 EA
Product
No.
Mfg.
No.
Description
325133-D
TP5-D
5lb Pick Mattock
Order
Mult.
Weight
1/0/6
4.917
Unit
Cost
10.99 EA
SLEDGES/ MAULS
Truper
SLEDGES /MAU LS
Truper
Woodbuster Maul - 12 lb. Drop-forged high-carbon steel head.
Clay Pick - Excellent quality and workmanship. Fully guaranteed. 6 lb.
Black finish.
Cushion-grip, all steel handle. Shape of head prevents
sticking. Painted with long lasting, high-gloss paint. 30"
handle.
Product
No.
Mfg.
No.
Description
302078-D
ZP6-D
6lb Clay Pick
Order
Mult.
Weight
1/0/6
6.000
Unit
Cost
11.99 EA
SLEDGES/ MAULS
Vaughan-Bushnell
Rigbuilder’s Hatchet - Wood handle. Drop-forged high-carbon steel.
Product
No.
Mfg.
No.
Description
324787-D
TJ-12-D
12lb Woodbuster Maul
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
Order
Mult.
Weight
1/0/2
6.500
Unit
Cost
27.99 EA
Large, milled, crowned face. 3-1/2" blade. 28 oz. head,
17" hickory handle.
NOTE: Replacement handle (model No.
64172) for the rigbuilder’s hatchet is
located with the California framing
hammer Model No. CF1.
Product
No.
Mfg.
No.
Description
300542-C
RB
Rigbuilder Hatchet
Order
Mult.
Weight
1/0/2
2.500
Unit
Cost
37.99 EA
10-9
HAND TOOLS
ends. Shipped assembled. Hickory handle. 36" handle.
HAND TOOLS
HATCHET
HATCHET
REPLACEMEN THAN DLES
Shingling Hatchet - White hickory wood handle. Forged head, full
Shingling Hatchet Gauge - For model No. E3-CA, E3-S, Plumb
model No. 565-1/2, and Great Neck model No. SHR14.
Vaughan-Bushnell
polished. Milled crowned face. Nail slot and draw
knife back blade, 3-hole gauge in 1/
2" increments; 2-1/8" cut. 14 oz.,
13" long.
Product
No.
Mfg.
No.
Description
353432-C
SH
14oz Shingling Hatchet
Order
Mult.
Weight
1/0/2
1.750
Unit
Cost
Product
39.99 EA No.
312619-D
HATCHET/ AXE
Mfg.
No.
Description
Order
Mult.
Weight
EG
Shingling Hatchet Gauge
0/0/10
.025
Unit
Cost
.89 EA
REPLACEMEN THAN DLES
Shingling Hatchet - Steel handle. Full polished. Milled and hardened
head. Gauge adjusts every 1/2". Blue nylon vinyl,
Rigbuilder Hatchet - Steel handle, full polished, milled, and
Shock Reduction Grip™ is
hardened head. Blue nylon vinyl, Shock Reduction Grip™
ergonomically correct to reduce
is ergonomically correct to reduce vibration. 3-1/2"
vibration. Inside edge of thin blade
cutting edge. 16-3/4" overall length. 35 oz.
is sharpened. 13-7/16" long. 34 oz.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
350211-C
E3-S
Shingling Hatchet
1/4/36
1.750
Unit
Cost
48.99 EA
HATCHET/ AXE
Shingling Hammer - Steel handle. Forged head, full polished. For
use with metric and standard shingles. Milled head.
Replaceable blade and gauge. Blue nylon vinyl
cushion-grip, Shock Reduction Grip™ is
ergonomically correct to reduce vibration. Blade has
2 notched cutting edges and is retractable. 29 oz.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
383678-C
E3-R
35oz Rigbuilder Hatchet
1/4/36
2.500
Unit
Cost
49.99 EA
REPLACEMEN THAN DLES
Truper
Do it® Michigan Pattern Single Bit Axe - High-carbon steel
forged head. Heat-treated with full ground edges. Fitted, wedged hickory
handle.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
354360-C
E3-CA
Shingling Hammer
1/4/36
1.750
Unit
Cost
46.99 EA
HATCHET/ AXE
Shingling Hatchet Replacement Blades And Gauge - For
model No. E3-CA hatchet. Includes 3 blades, 1-gauge, and 2 screws.
Product
No.
Mfg.
No.
Description
348190-D
300837-D
348190
300837
2-1/2 lb. with 29" handle
3-1/2 lb. with 36" handle
Order
Mult.
Weight
1/0/4
1/0/4
2.250
5.250
Unit
Cost
17.99 EA
19.99 EA
REPLACEMEN THAN DLES
Truper
Do it® Michigan Pattern Double Bit Axe - High-carbon steel
forged head. Heat-treated with full ground edges. Fitted, wedged hickory
handle. 34" handle, 3-1/2 lb. head.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
354351-D
CA-39R
Replacemnt Hatchet Blade
1/0/20
.015
10-10
Unit
Cost
3.79 CD
Product
No.
Mfg.
No.
Description
300864-D
300864
3-1/2lb Db Michigan Axe
Order
Mult.
Weight
1/0/4
5.250
Unit
Cost
27.99 EA
Your representative can give you details
on product availability and shipping requirements!
HAND TOOLS
REPLACEMENT HANDLES
REPLACEMENT HANDLES
V & B Mfg. Co.
NOTE: 1 steel wedge (wood wedge not required).
Hatchet Handle - For use on half hatchets with the approximate eye
sizes and lengths shown below. Includes 1 wood and 1 steel
wedge.
REPLACEMENTHA NDLES
V & B Mfg. Co.
Do it® Engineers Hammer Handle - For use in engineer’s
Product
No.
Mfg.
No.
302853-D
302853
302862-D
302862
Description
Do it®; Eye size: 1-17/32" x
17/32", length 14"
Do it®; Eye size: 1-1/2" x 9/
16", length 17-3/4"
Order
Mult.
Weight
Unit
Cost
1/0/12
.600
5.49 EA
1/0/12
.600
6.29 EA Product
No.
303040-E
Mfg.
No.
Description
Order
Mult.
Weight
303040
16"engineer Hammr Handle
1/0/12
.600
Unit
Cost
5.79 EA
NOTE: Fits Broad & Rig Builders hatchets and some California framer hammers.
REPLACEMENTHA NDLES
V & B Mfg. Co.
REPLACEMENT HANDLES
V & B Mfg. Co.
Do it Best® Blacksmith Handle - For use on blacksmith
hammers of the following weights and eye sizes. Includes 1 wood and 1
steel wedge.
Product
No.
Mfg.
No.
303004-D
303004
303013-D
303013
Description
Eye size: 1-7/32" x 5/8",
length 15-3/4", No. 3 eye
Eye size: 1-1/4" x 1", length
16", No. 2 eye
Do it® And Do it Best® Nail Hammer Handles - Adze eye
nail hammer handles for hammers from 7 oz. to 32 oz. Includes 1 wood
and 1 steel wedge.
Order
Mult.
Weight
Unit
Cost
1/0/12
.600
6.29 EA
1/0/12
.600
6.29 EA Product
No.
Mfg.
No.
302899-E
302899
Do it Best® Machinists Or Ball Peen Hammer Handle -
335113-D
335113
For use with ball peen or machinist hammers of the following weights and
eye sizes. Includes 1 wood and 1 steel wedge. No. 3 eye.
302915-D
302915
302924-D
302924
343710-E
343710
343729-D
343729
REPLACEMENT HANDLES
V & B Mfg. Co.
Product
No.
Mfg.
No.
302997-D
302997
302988-D
302988
302979-D
302979
302960-E
302960
302951-E
302951
Description
32 to 48 oz., 1-3/16" x 11/16"
eye, 18" long
24 to 32 oz., 1-3/32" x 9/16"
eye, 16" long
16 to 20 oz., 31/32" x 1/2"
eye, 14" long
8 to 12 oz., 13/16" x 3/8"
eye, 12" long
4 to 6 oz., 21/32" x 11/32"
eye, 11" long
Service is our priority!
Our commitment is to meet your needs!
Order
Mult.
Weight
1/0/12
.600
6.49 EA
1/0/12
.600
5.99 EA
1/0/12
.600
5.79 EA
1/0/12
.600
5.79 EA
1/0/12
.600
5.79 EA
Description
Do it Best®, 7 oz., 3/4" x 3/8"
eye, 12" long
Do it®, 13 oz., 1" x 1/2" eye,
13-1/2" long
Do it Best®, 16 oz., 1-1/16" x
9/16" eye, 14" long
Do it®, 16 oz., 1-1/16" x 9/
16" eye, 14" long
Do it Best®, 20 to 24 oz.,
1-3/32" x 19/32" eye, 16-1/2"
long
Do it Best®, 28 to 32 oz.,
1-1/8" x 21/32" eye, 17-3/4"
long
Order
Mult.
Weight
Unit
Cost
1/0/12
.600
5.79 EA
1/0/12
.600
4.49 EA
1/0/12
.600
5.79 EA
1/0/12
.600
4.79 EA
1/0/12
.600
6.79 EA
1/0/12
.600
6.99 EA
Unit
Cost
10-11
HAND TOOLS
hammers of 3 to 4 lb. Approximate eye size: 15/16" x 11/16". Length: 16".
Includes 1 wood and 1 steel wedge.
HAND TOOLS
REPLACEMENT HANDLES
REPLACEMENTHANDLES
REPLACEMEN THAN DLES
V & B Mfg. Co.
V & B Mfg. Co.
Do it® And Do it Best® Octagon Nail Hammer Handle - Do it® Boy’s Single Bit Axe Handle - Bent style for use on 2-1/
Octagon shaped handle has adze eye of approximately 1-1/16" x 9/16".
For 16 oz. hammers. Length: 14". Includes 1 wood and 1 steel
wedge.
4 lb. axes. Approximate eye size: 2-1/16" x 11/16". Length: 28". Includes
1 wood wedge and 1 steel wedge.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302942-D
335122-D
302942
335122
Do it Best®
Do it®
1/0/12
1/0/12
.600
.600
302782-D
302782
28" Single Bit Ax Handle
1/0/12
1.200
Unit
Cost
5.79 EA
4.99 EA
V & B Mfg. Co.
Double Bit Axe Handle - 36" length. For 3 to 5 lb. double bit axe.
Approximate eye size: 2-7/8" x 5/8". Includes 1 wood wedge and
1 steel wedge.
Handle Saver - Durable rubber collar protects sledge hammer,
splitting maul, and axe handles from overstrikes and
ordinary wear and tear. Handle
must be removed from tool to install
Handle Saver.
Mfg.
No.
373672-D
89802
373702-E
89804
9.99 EA
REPLACEMEN THAN DLES
V & B Mfg. Co.
REPLACEMENTHANDLES
Product
No.
Unit
Cost
Description
Fits most sledge and maul
handles, hole is 1-3/16"x 15/
16", 3-3/4" circumference
Fits most single bit axe
handles
Order
Mult.
Weight
1/0/10
.300
Unit
Cost
6.79 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302755-C
302755
Do it®
1/0/12
1.625
Unit
Cost
10.79 EA
REPLACEMEN THAN DLES
1/0/10
.300
6.79 EA
V & B Mfg. Co.
Oval Eye Sledge Handle - Hickory handle. 36" for 20 lb. to 24 lb.
sledges. Oval eye 1-1/4" x 1-1/2".
REPLACEMENTHANDLES
Steel Wedges - When driven into the wood, the barbs prevent their
working back out. Will not chip or break. Also
used to tighten ladder rungs. Plated
to resist rust.
Product
No.
Mfg.
No.
303059-E
8002
339296-E
8004
303077-E
8005
303086-E
8010
303095-E
8015
10-12
Description
Size: 2, 5/8" L. x 3/8" W., 1/
8" thick
Size: 4, 13/16" L. x 7/16" W.,
5/32" thick
Size: 5, 1-1/16" L. x 1/2" W.,
5/32" thick
Size: 10, 1-1/16" L. x 15/16"
W., 5/32" thick
Size: 15, 1-1/4" L. x 1-5/16"
W., 3/16" thick
Order
Mult.
Weight
Unit
Cost
36/0/360
.007
.49 EA
36/0/360
.014
Product
.59 EA No.
36/0/360
.014
.59 EA
24/0/240
.031
.89 EA
12/0/120
.063
.99 EA
366730-D
Mfg.
No.
Description
67393
20-24lb Sledge Handle
Order
Mult.
Weight
1/0/6
1.250
Unit
Cost
11.79 EA
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
REPLACEMENT HANDLES
REPLACEMENT HANDLES
REPLACEMENTHA NDLES
V & B Mfg. Co.
V & B Mfg. Co.
Pick Or Mattock Handle - For 5 lb. or heavier picks and mattocks. Fiberglass Hammer Handle Kit - Stronger than wood. Handle
Approximate eye size 3" x 2". Length: 36".
will not split or crack under normal use. Molded clad exterior. Kit
contains epoxy. 14" long for claw
hammer.
Product
No.
Mfg.
No.
Description
329312-C
61456
14" Fiberglass Handle
Order
Mult.
Weight
1/0/6
1.600
Unit
Cost
13.99 EA
REPLACEMENTHA NDLES
Fiberglass Hammer Handle Kit - Stronger than wood. handle will
not split or crack under normal use. Molded clad exterior. Kit
contains epoxy. 15" long for Engineers/
Blacksmith hammers.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302844-C
302844
Do it® - low grade
1/0/12
2.500
Unit
Cost
Product
No.
Mfg.
No.
Description
329290-D
887
16" Fiberglass Handle
11.79 EA
Order
Mult.
Weight
1/0/4
1.200
Unit
Cost
7.49 EA
REPLACEMENT HANDLES
V & B Mfg. Co.
REPLACEMENTHA NDLES
Dasco
Tamper Handle - 48" handle for Marion Tampers model No. 289 and Fiberglass Sledge And Maul Handle Kit - Stronger than
290.
wood. Handle will not split or crack under normal use. Molded clad
exterior. Kit contains epoxy. 34" long for
6 to 16 lb. and some 18 to 24 lb. tools.
Product
No.
Mfg.
No.
Description
329363-D
881
34" Fbrglass Maul Handle
Order
Mult.
Weight
1/0/4
3.000
Unit
Cost
12.99 EA
REPLACEMENTHA NDLES
Dasco
Fiberglass Single Bit Axe Handle Kit - Stronger than wood.
Handle will not split or crack under normal use. Molded clad exterior. Kit
contains epoxy. 34" long for 3 to 5 lb.
single bit axes.
Product
No.
Mfg.
No.
Description
338427-C
69850
48" Tamper Handle
Order
Mult.
Weight
1/0/6
2.500
Unit
Cost
Product
No.
Mfg.
No.
Description
329339-D
882
34" Fibrglass Axe Handle
15.79 EA
Order
Mult.
Weight
1/0/4
2.000
Unit
Cost
12.99 EA
UTIL TYBARS
REPLACEMENT HANDLES
V & B Mfg. Co.
Dasco
Do it® Tamper Handle - 42" ash handle for Barco Tampers model
Fiberglass Double Bit Axe Handle Kit - Stronger than wood.
No. 14708 and 14710.
Handle will not split or crack under normal use. Molded clad exterior. Kit
contains epoxy. 36" long for 3 to 5 lb.
double bit axes.
Product
No.
Mfg.
No.
Description
329355-D
888
36" Fibrglass Axe Handle
Order
Mult.
Weight
1/0/4
2.000
Unit
Cost
14.99 EA
UTIL TYBARS
Cooper Tools
Nail Puller - Consists of hammer handle, long and short jaw. Box joint
keeps jaws in perfect alignment. Black enamel finish. Blue
body and hand-hold. Polished jaws.
Product
No.
Mfg.
No.
Description
341533-E
341533
42" Tamper Handle
Order
Mult.
Weight
1/0/6
3.000
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
Unit
Cost
12.49 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302265-C
56
Nail Puller
1/6/12
3.792
Unit
Cost
57.99 EA
10-13
HAND TOOLS
Dasco
HAND TOOLS
UTILITY BARS
Uti l yBars
UTILTY BARS
Vaughan-Bushnell
Double End Nail Puller - For extracting deeply embedded nails.
Drop- forged from 5/8" hex, high-carbon steel. Claws are
hardened and tempered. Blue rust-resistant
finish, polished claw. 11" long.
Product
No.
Mfg.
No.
Description
345458-C
NP12DE
11" Dble End Nail Puller
Order
Mult.
Weight
1/0/4
.204
Tack Puller - Unbreakable amber handle. Blister proof dome. Made of
super strong hardened tool steel. Full beveled and round
claw.
Unit
Cost
15.49 EA
UTIL TYBAR S
Vaughan-Bushnell
Bear Claw Nail Puller - Forged, tempered steel with a flat claw for
easy wedging and minimal wood damage. Rocker head
provides excellent leverage. Black
rust-resistant finish.
Product
No.
Mfg.
No.
Description
378771-C
378798-C
378801-C
BC-8
BC-10
BC-12
8"
10"
12"
Order
Mult.
Weight
1/0/4
1/0/4
1/0/4
.464
.938
1.313
Unit
Cost
11.99 EA
14.99 EA
17.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302283-C
TL4C
Tack Puller
1/6/72
.167
Unit
Cost
2.99 EA
UTILTY BARS
Dasco
Moulding Tool - Features a smooth, curved blade that neatly removes
trim, moulding, and quarter-round without
marring the finished wall pryed against. Made
of heated-treated, high-carbon steel for years
Nail Claw - 5/8" x 11". Gets close into corners to pull nails where a claw of use. Also features a nail-puller design on the
hammer can’t. Drop-forged from
opposite end. Overall length: 9-3/4".
octagon alloy steel with carefully
Product
Mfg.
designed extracting claw, heat-treated
No.
No.
Description
for long life. Black enamel finish.
UTIL TYBAR S
302309-D
3471
9-3/4" Moulding Tool
Order
Mult.
Weight
1/0/3
1.075
Unit
Cost
15.79 EA
UTILTY BARS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302274-C
55-033
11" Nail Claw
1/6/36
.875
Unit
Cost
9.99 EA
UTIL TYBAR S
Wonder Bar - Forged high-carbon steel. Heat-treated. Rocker head
provides maximum leverage. Beveled nail pulling
slots. Ideal for pulling nails, prying,
lifting, and scraping. 12-3/8" long.
Maasdam-Dead On/Hart
Nail Puller - Double ended 9" nail puller. Dead on exhumer. Built in saw
wrench and bottle opener. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
338230-B
55-515
12-3/8" Wonder Bar
1/4/24
1.404
Unit
Cost
8.99 EA
UTILTY BARS
Wonder Bar II - 7" length for light-duty work. Beveled nail pulling slots.
Ideal for pulling nails, prying, lifting, and
scraping. Tempered steel.
Rust-resistant nickel-plated finish.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355542-B
EX9
9" Nail Puller
1/0/12
.750
10-14
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301922-D
55-045
7" Wonder Bar
1/6/36
.294
Unit
Cost
5.99 EA
Unit
Cost
19.99 EA
Save time by letting us locate those
hard-to-find items for you!
UTIL TYBARS
Vaughan Superbar - Forged, spring tempered steel for heavy-duty
uses. Rocker head provides maximum leverage. Beveled
nail pulling slots. Pries, scrapes,
pounds and pulls. 24 oz. 15" long. 4 per
box.
Wrecker Bar - Black finish with red painted head and chisel. Unique
push and pull action. Great for removing decking,
siding, fencing, and shingles. 3/4" x 30", with 6" rocker
head.
Vaughan-Bushnell
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302292-B
B215
15" Vaughan Superbar
1/4/24
1.625
Unit
Cost
Product
9.99 EA No.
360112-B
UTIL TYBA RS
Mfg.
No.
Description
TW30WB
30" Wrecker Bar
Order
Mult.
Weight
1/0/6
4.833
Unit
Cost
19.99 EA
UTIL TYBARS
Dasco
FatMax® Wrecking Bar - Larger cross-sectional area than a
Ripping Bar - Straight. 18" long overall. 2" cutting edge. 3/4" hexagon
standard 3/4" hexagonal bar. Flat, U shaped prying end
provides stable base for lifting without
damaging surfaces. Forged recesses
for better grip. Tri-lobe cross-section for
greater comfort. Additional slot
specifically for pulling nails (size 2d thru
20d). High-visibility yellow color.
Product
No.
Mfg.
No.
Description
321468-C
321495-C
321501-C
55-101
55-102
55-104
14"
24"
36"
shape tool steel. 1-1/8" diameter head. Target head
feature on striking end.
Order
Mult.
Weight
1/0/4
1/0/4
1/0/4
2.750
5.625
8.375
Unit
Cost
9.99 EA
15.99 EA
19.99 EA
UTIL TYBA RS
FatMax® Extreme™ Fubar Function Utility Bar - 1-piece
forged bar from select steel for increased strength and durability.
Bi-material grip over molded directly
onto the bar for greater comfort and
better feel. Textured grip for excellent
comfort and control even when wet.
Beveled nail slot for pulling and prying
nails. Tempered striking / struck face
and chisel blade for splitting and cutting building materials. Large mouth
striking face for maximum demolition effect. Special extracting claw
heat-treated for added durability. 2-tiered jaw for grabbing common
dimensional lumber and decking.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
337674-B
55-099L
64oz Fubar
1/0/4
4.900
Product
No.
Mfg.
No.
Description
302194-D
0231
18" Ripping Bar
Order
Mult.
Weight
1/0/3
2.050
Unit
Cost
13.49 EA
UTIL TYBARS
Pry Bar - 18" long I-beam construction forged from alloy tool steel.
Rocking head provides maximum leverage.
Beveled nail slot. Baked enamel finish.
Unit
Cost
39.99 EA
UTIL TYBA RS
Truper
Do it Best® Gooseneck Wrecking Bar - Black finish carbon
steel. Claw end recessed and beveled to accomodate any size nail. Claw
and chisel ends ground.
Product
No.
Mfg.
No.
Description
302087-E
302096-D
302103-D
302112-D
302121-C
302087
302096
302103
302112
302121
1/2" x 12"
3/4" x 18"
3/4" x 24"
3/4" x 30"
3/4" x 36"
We can become your single-source supplier
on many of the products you currently use!
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
.542
1.700
3.375
4.167
5.000
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
331686-C
PB-18
18" Pry Bar
1/4/48
1.146
Unit
Cost
21.49 EA
Unit
Cost
4.99 EA
5.99 EA
7.99 EA
9.99 EA
10.99 EA
10-15
HAND TOOLS
HAND TOOLS
UTILITY BARS
UTIL TYBA RS
HAND TOOLS
UTILITY BARS
UTIL TYBAR S
UTILTY BARS
Dasco
Dasco
Ripping Bar - Offset. Polished thin blade for ripping. 90° claw fits in
Shingle Ripper - 18" long. Forged from high-quality steel. Will remove
close quarters, heat-treated steel. 3 nail pullers. 17"
long.
a single shingle without damaging the piece
removed or surrounding pieces. Can be
used on all types of shingles and roofing
slates.
Product
No.
Mfg.
No.
Description
332933-D
0640
Shingle Ripper
Order
Mult.
Weight
Unit
Cost
1/0/3
2.600
Order
Mult.
Weight
Unit
Cost
1/0/3
1/0/3
12.250
18.000
29.99 EA
34.99 EA
27.99 EA
UTILTY BARS
Truper
Pinch Point Bar - High-carbon steel.
Product
No.
Mfg.
No.
Description
302201-D
0232
17" Ripping Bar
Order
Mult.
Weight
1/0/3
2.050
Unit
Cost
14.99 EA
UTIL TYBAR S
Vaughan-Bushnell
Board Straightener - The new BowJak™ from Vaughan & Bushnell
quickly takes the curves out of warped, bent, or crooked
boards. When placed next to a bowed board,
the BowJak™ is tapped into place on the
adjacent joist, then the handle is pulled to
force the board straight for final hammering.
The operation takes only a few seconds and
can close gaps between boards up to 2-1/4".
The lightweight, 26 oz. BowJak™, at 12",
easily fits most tool pouches and is handily
by it’s tail hook.
Product
No.
Mfg.
No.
Description
339091-E
352371-D
PPB51-C
PPB60-C
12 lb. 1-1/8" x 1-1/8" x 51"
18 lb. 1-1/4" x 1-1/4" x 60"
NAILSETS
Truper
San Angelo Bar - High-carbon hex steel. Point and chisel end. 17 lb.
1" x 1" x 72".
Product
No.
Mfg.
No.
Description
358266-B
BJ11
Board Straightener
Order
Mult.
Weight
1/0/2
2.167
Unit
Cost
32.99 EA
UTIL TYBAR S
Boardbender - The boardbender straightens deck and floor boards
during installation. Hook the boardbender over
the joist, push down and boards squeeze
together tight. Also straightens joists. Great
for installing tongue and groove subflooring.
Durable 5/8" steel construction.
Product
No.
Mfg.
No.
Description
314250-D
BAP175-C
1x1x72 San Angelo Bar
Order
Mult.
Weight
Unit
Cost
1/0/3
20.000
27.99 EA
UTILTY BARS
Truper
Post Hole Digger And Tamping Bar - Made of forged steel.
Meets requirements for withstanding impact, strain, and wear. 16 lb., 69"
long. 1" round stock. 8-1/2" x 2-3/4"
blade. 3" diameter tamper. Black finish.
Product
No.
Mfg.
No.
Description
372676-C
93-310
Board Bender
10-16
Order
Mult.
Weight
1/0/2
2.635
Product
No.
Mfg.
No.
Description
302372-D
TB175-C
16lb Digging Bar
Order
Mult.
Weight
Unit
Cost
1/0/3
17.000
29.99 EA
Unit
Cost
44.99 EA
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
*BALTIMORE TOOLWORKS
MORE TO LWORKS
HAND TOOLS
*BALTI -
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
10-17
HAND TOOLS
NAIL SET
Nail Set
UTILTY BARS
Baltimore Tool
Nail Set - Square head, round knurled body. Alloy steel hardened and
7/32" x 7" Hard Cap Center Punch - Unbreakable, tough
tempered. Tips cupped and chamfered.
Square head prevents rolling. Black
phosphate finish. 4" long. 5/16" stock.
reinforced polymer cap. Comfort-grip reduces shock up to 90%. Noise
level reduced by up to 80%. Striking
surface increased by up to 80%, 4 cap
diameters to match hammer sizes.
Display Carded. Made in U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
316598-C
316563-C
316555-C
316547-C
58-111
58-112
58-113
58-114
1/32" tip
2/32" tip
3/32" tip
4/32" tip
1/6/72
1/6/72
1/6/72
1/6/36
.106
.108
.111
.089
Unit
Cost
2.29 EA
2.29 EA
2.29 EA
2.29 EA
UTIL TYBAR S
3-Piece Nail Set Pack - Assortment of 1 each 1/32", 2/32", and 3/
32". Carded. Order 24 and receive a pre-loaded clip-strip.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
328764-B
66412
7/32" Hardcap Cntr Punch
1/6/60
.407
Unit
Cost
7.99 EA
UTILTY BARS
Baltimore Tool
Hard Cap Pin Punch - Unbreakable, tough reinforced polymer cap.
Comfort-grip reduces shock up to 90%. Noise level
reduced by up to 80%. Striking surface
increased by up to 80%, 4 cap
diameters to match hammer sizes.
Display carded. Made in U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
316539-C
58-230X
3pc Nail Set
1/0/24
.261
Unit
Cost
5.79 SET
UTIL TYBAR S
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
328773-B
328791-B
328808-B
328817-B
66422
66423
66424
66427
1/8" x 7"
5/32" x 7"
3/16" x 7"
1/4" x 7"
1/6/60
1/6/60
1/6/60
1/6/60
.387
.377
.397
.457
Nail Set - Shock absorbing ribbed grip for precision hold. 25% longer
length makes it easy to set nails in hidden and
hard-to-reach areas. Color coded by tip size makes it easy
to locate. Fully-hardened; precision-milled steel for extra
long life. Long beveled tip for easier nail head alignment.
Carded.
Unit
Cost
7.99 EA
7.99 EA
8.29 EA
8.79 EA
UTILTY BARS
Baltimore Tool
7/32" x 7" Hard Cap Prick Punch - Unbreakable, tough
reinforced polymer cap. Comfort-grip reduces shock up to 90%. Noise
level reduced by up to 80%. Striking
surface increased by up to 80%, 4 cap
diameters to match hammer sizes.
Display Carded. Made in U.S.A.
Product
No.
Mfg.
No.
374679-C
58-930X
374687-C
374695-C
374709-C
58-911
58-912
58-913
Description
3-piece set; 1/32", 2/32", and
3/32"
1/32"
2/32"
3/32"
Order
Mult.
Weight
1/0/24
.430
1/6/36
1/6/36
1/6/36
.150
.150
.150
UTIL TYBAR S
Dasco
Unit
Cost
8.99 SET
3.99 EA
3.99 EA Product
3.99 EA No.
328826-B
Description
Order
Mult.
Weight
66435
7/32" Hardcp Prick Punch
1/6/60
.407
Unit
Cost
8.29 EA
UTILTY BARS
Scratch Awl - All steel design. No split or loose handles. Well balanced
with fine feel. Entire point
heat-treated. Prices with
wooden handled awls. Length
7".
Product
No.
Mfg.
No.
Description
340250-D
0431-0
7" Scratch Awl
Order
Mult.
Weight
1/0/3
.325
Unit
Cost
Baltimore Tool
Hard Cap Alignment - Unbreakable, tough reinforced polymer cap.
Comfort-grip reduces shock up to 90%. Noise level
reduced by up to 80%. Striking surface
increased by up to 80%, 4 cap
diameters to match hammer sizes.
Display carded. Made in U.S.A.
8.49 EA Product
No.
328835-B
328844-B
10-18
Mfg.
No.
Mfg.
No.
Description
Order
Mult.
Weight
66441
66442
1/4" x 10"
5/16" x 10"
1/6/36
1/6/36
.689
1.222
Unit
Cost
10.49 EA
13.99 EA
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
CHISELS
UTIL TYBARS
Baltimore Tool
Baltimore Tool
Hard Cap Cold Chisel - Unbreakable, tough reinforced polymer
3" Hard Cap Chisel - Unbreakable, tough reinforced polymer cap.
cap. Comfort-grip reduces shock up to 90%. Noise level
reduced by up to 80%. Striking surface
increased by up to 80%, 4 cap
diameters to match hammer sizes.
Carded for display. Made in U.S.A.
Comfort-grip reduces shock up to 90%. Noise level
reduced by up to 80%. Striking
surface increased by up to 80%, 4
cap diameters to match hammer
sizes. Carded for display. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
328620-C
328639-B
328657-B
328675-B
328700-C
65104
65106
65107
65122
65124
1/2" x 7"
3/4" x 8-1/2"
7/8" x 11"
3/4" x 11"
1" x 11"
1/6/60
1/6/60
1/6/36
1/6/36
1/6/30
.427
.927
1.058
1.308
1.803
Unit
Cost
8.99 EA
10.49 EA Product
11.49 EA No.
12.49 EA 328853-B
14.99 EA
Mfg.
No.
Description
Order
Mult.
Weight
66942
3" Hardcap Floor Chisel
1/6/30
1.783
Unit
Cost
14.29 EA
UTIL TYBARS
Baltimore Tool
UTIL TYBA RS
Baltimore Tool
Hard Cap Electrician Chisel - . Unbreakable, tough reinforced
Hard Cap Mason’s Chisel - Unbreakable, tough reinforced
polymer cap. Comfort-grip reduces shock up to 90%. Noise level
reduced by up to 80%. Striking surface
increased by up to 80%, 4 cap
diameters to match hammer sizes.
Carded for display. Made in U.S.A.
polymer cap. Comfort-grip reduces shock up to 90%. Noise level
reduced by up to 80%, 4 cap diameters to match hammer
sizes. Display carded. Made in U.S.A.
Product
No.
Mfg.
No.
328728-B
328737-B
66356
66357
Description
Order
Mult.
Weight
1-3/4" x 8-1/2"
2-1/4" x 8-1/2".
1/6/36
1/6/36
1.403
1.783
Unit
Cost
13.99 EA
14.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
328880-B
66945
Elect Hardcap Chisel
1/6/36
1.433
Unit
Cost
13.99 EA
UTIL TYBARS
Dasco
Flat Utility Chisel - Heat treated, high-carbon steel construction. Flat
design is ideal for using in hard to reach
areas. Larger stock size gives added
Hard Cap Brick Set - Unbreakable, tough reinforced polymer cap. strength for longer life. Use for metal
Comfort-grip reduces shock up to 90%. Noise level reduced by up to 80%. cutting or masonry cutting and shaping.
Blue enamel finish. Cut 1-1/4". Length 12".
Striking surface increased by up to 80%, 4 cap diameters to match
hammer sizes. Display Carded. Made in U.S.A.
Product
Mfg.
UTIL TYBA RS
Baltimore Tool
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
328746-B
328755-B
66350
66351
3" x 8-1/2"
3-1/2" x 8-1/2"
1/6/36
1/6/36
1.744
1.764
No.
No.
Description
356328-D
337-0
Flat Utility Chisel
Unit
Cost
15.99 EA
15.99 EA
Order
Mult.
Weight
1/0/3
.581
Unit
Cost
9.49 EA
UTIL TYBARS
Dasco
Cold Chisel - Target head is 3 times larger than the stock size of the
tool. Offers freedom from spalling and
mushrooming. Finished in attractive
gray and black. Guaranteed. Finest
domestic steel, heat-treated to correct
hardness.
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
Product
No.
Mfg.
No.
Description
340205-D
303380-D
303399-D
303415-D
341576-D
303424-D
303442-D
303460-D
303479-D
303488-D
303497-D
341541-D
0400-0
0401-0
0402-0
0405-0
0441-0
0406-0
0408-0
0410-0
0413-0
0415-0
0417-0
0419-0
1/4" cut, 4-7/8" long
5/16" cut, 5-1/4" long
3/8" cut, 5-5/8" long
1/2" cut, 6-3/8" long
1/2" cut, 12" long
5/8" cut, 6-3/4" long
3/4" cut, 7-1/8" long
3/4" cut, 12" long
7/8" cut, 7-1/2" long
7/8" cut, 12" long
1" cut, 7-7/8" long
1" cut, 12" long
Order
Mult.
Weight
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
.075
.100
.150
.300
.575
.225
.575
.950
.775
1.200
1.100
1.680
Unit
Cost
4.49 EA
4.79 EA
4.79 EA
5.49 EA
7.79 EA
6.29 EA
7.29 EA
9.99 EA
8.79 EA
11.79 EA
10.79 EA
13.79 EA
10-19
HAND TOOLS
Chisels
HAND TOOLS
CHISELS
CHSI ELS
CHISELS
Dasco
Dasco
Plugging Chisel - Drop-forged from high-grade tool steel. Black
6-Piece Pin Punch Set - Heat treated, high-carbon steel
construction. Contains 1 each 1/16", 1/8", 5/32", 3/16", 1/4", and
5/16" pin punches.
finish. Polished edges. For cutting mortar out
between bricks, for cornice work,
and for cutting out hardened
material in expansion joints.
Target head design. Cut 3/16".
Length: 10".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303807-D
0476
3/16" Plugging Chisel
1/0/10
.725
Unit
Cost
9.79 EA
CHSI ELS
Dasco
Tooth Chisel - Used to cut soft stone such as Bedford. Strong, sharp
teeth cut clean and accurately. Forged target
head. Not to be used on hard stone or
cement. Head diameter: 1-1/16". 7-1/2"
long.
Product
No.
Mfg.
No.
Description
366226-C
22
6pc Punch Pin Set
Order
Mult.
Weight
1/0/3
.800
Unit
Cost
16.99 SET
CHISELS
Product
No.
Mfg.
No.
Description
341776-D
303852-D
303861-D
1232-0
1233-0
1234-0
1-1/4" cut
1-3/4" cut
2-1/4" cut
Order
Mult.
Weight
1/0/3
1/0/3
1/0/3
1.000
1.050
1.450
Unit
Cost
10.49 EA
10.79 EA
12.49 EA
Dasco
Prick Punch - For marking and layout work these sharp polished
points aid accuracy. Polished taper, tough steel
and heat-treated.
CHSI ELS
Dasco
Center Punch - Finest domestic alloy steel. Target head makes
accurate hole starting easier. Sharp points ground
and heat-treated for long life.
Product
No.
Mfg.
No.
Description
340278-D
329460-D
0540-0
0541-0
5/16" stock, 4-1/2" long
3/8" stock, 5" long
Order
Mult.
Weight
1/0/3
1/0/3
.100
.150
Unit
Cost
3.99 EA
4.29 EA
CHISELS/ PUNC HES
Dasco
Product
No.
Mfg.
No.
Description
341568-D
340269-D
329451-D
303941-D
0530-0
0531-0
0532-0
0534-0
1/4" stock, 4" long
5/16" stock, 4-1/2" long
7/16" stock, 5" long
1/2" stock, 5-1/2" long
Order
Mult.
Weight
1/0/3
1/0/3
1/0/3
1/0/3
.075
.100
.250
.350
Unit
Cost
3.79 EA
3.99 EA
4.79 EA
5.49 EA
Drift Punch - Wide, utility punch, with complete taper heat-treated.
Strong points and target head render long
service.
CHSI ELS
Dasco
Pin Punch - Specially tempered alloy steel to assure durability. Target
head design adds life to head. Gray and
black enamel finish.
Product
No.
Mfg.
No.
Description
329530-D
329549-D
0603-0
0606-0
3/16" point, 6" taper, 9" long
1/4" point, 9" taper, 12" long
Order
Mult.
Weight
1/0/3
1/0/3
.400
.800
Unit
Cost
10.49 EA
11.99 EA
CHISELS
Dasco
Electrician’s Chisel - Shorter handle for use in tight, crowded
Product
No.
Mfg.
No.
Description
340303-D
304094-D
329503-D
304101-D
329512-D
340312-D
0592-0
0581-0
0582-0
0583-0
0584-0
0589-0
1/16" stock, 4-1/2" long
3/32" stock, 5-1/2" long
1/8" stock, 5-1/2" long
5/32" stock, 5-1/2" long
3/16" stock, 5-1/2" long
1/4" stock, 6" long
Order
Mult.
Weight
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
.075
.150
.125
.125
.175
.250
Unit
Cost
spaces. High-carbon steel. Forged target head. 8" long.
2-3/4" cutting edge.
4.29 EA
4.49 EA
4.79 EA
4.79 EA
4.79 EA
5.49 EA Product
No.
342564-D
Mfg.
No.
Description
0470-0
2-3/4" Floor Chisel
Order
Mult.
Weight
1/0/3
.530
Unit
Cost
14.49 EA
CHISELS
Dasco
Brick Set - Best tool for cutting brick. Perfect weight and balance.
Sharp, durable cutting edge. Safety head
for added use. 7" long.
Product
No.
Mfg.
No.
303727-D
0434-0
Continued Next Column
10-20
Description
2-1/2" cut
Order
Mult.
Weight
1/0/3
.875
Unit
Cost
9.29 EA
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
CHISELS
Continued From Previous Column
Product
No.
Mfg.
No.
Description
303736-D
340376-D
303745-D
333697-D
0435-0
0436-0
0437-0
0439-0
3" cut
3-1/2" cut
4" cut
5" cut
CHISE LS
Order
Mult.
Weight
1/0/3
1/0/3
1/0/3
1/0/3
1.275
1.200
1.275
1.500
Unit
Cost
10.49 EA
10.99 EA
11.99 EA
14.99 EA
CHI SELS
Dasco
Dasco
TargetGuard™ Cold Chisel - Durable, yellow plastic guard is
permanently molded to heat treated, high-carbon steel tool to
protect against misplaced blows. Comfortable hand grip helps
absorb shock and vibration. Used for cutting, shaping, and
removing metal such as cast-iron, wrought iron, steel, bronze,
and copper. Size 1" x 12".
Product
No.
Mfg.
No.
Description
340349-D
340358-D
340367-D
333689-D
0332-0
0333-0
0334-0
0335-0
1-1/4" cut
1-3/4" cut
2-1/4" cut
2-3/4" cut
Order
Mult.
Weight
1/0/3
1/0/3
1/0/3
1/0/3
.700
1.050
1.475
1.520
Unit
Cost
Product
No.
Mfg.
No.
Description
368644-C
G419
1x12 Cold Chisel
Order
Mult.
Weight
1/0/3
1.600
Unit
Cost
15.49 EA
CHISE LS
9.29 EA
9.79 EA
11.49 EA
12.49 EA
CHI SELS
Dasco
Star Drill - Heat-resistant, drop-forged steel. Designed for making
accurately sized holes in masonry. True
centered point permits faster
starting and helps keep holes
straight. Target head design for
added service life. 12" long.
Product
No.
Mfg.
No.
Description
304744-D
304753-D
304762-D
304780-D
304799-D
304806-D
304815-D
3621-0
3623-0
3627-0
3635-0
3643-0
3651-0
3655-0
1/4" cutting edge
5/16" cutting edge
3/8" cutting edge
1/2" cutting edge
5/8" cutting edge
3/4" cutting edge
7/8" cutting edge
Order
Mult.
Weight
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
1/0/3
.200
.200
.300
.550
.550
.925
1.150
Dasco
TargetGuard™ Concrete Chisel - Durable, yellow plastic guard
is permanently molded to steel tool to protect against misplaced
blows. Comfortable hand grip helps absorb shock and
vibration. Tough bull point with edge that starts easy, cuts fast,
and lasts long. Ideal for cutting through and breaking up
concrete. Size: 3/4" x 12".
Unit
Cost
5.79 EA Product
5.99 EA No.
6.29 EA 368679-C
6.79 EA
7.29 EA
9.29 EA
10.49 EA
Mfg.
No.
Description
G480
12" Concrete Chisel
Order
Mult.
Weight
1/0/3
2.050
Unit
Cost
13.49 EA
CHISE LS
Dasco
TargetGuard™ Mason Chisel - Durable, yellow plastic guard is
permanently molded to steel tool to protect against misplaced
blows. Comfortable hand grip helps absorb shock and
TargetGuard™ Flat Utility Chisel - Durable, yellow plastic guard vibration. Designed for cutting block, brick, and veined
stone. Size: 2-3/4" x 7-1/2".
is permanently molded to steel tool to protect against misplaced
blows. Comfortable hand grip helps absorb shock and
vibration. Can be used for metal cutting as well as
masonry cutting and shaping. Size: 1-1/4" x 12".
CHI SELS
Dasco
Product
No.
Mfg.
No.
Description
368628-C
G335
2-3/4" Mason Chisel
Order
Mult.
Weight
1/0/3
1.800
Unit
Cost
12.99 EA
CHISE LS
Dasco
TargetGuard™ Brick Set - Durable, yellow plastic guard is
Product
No.
Mfg.
No.
Description
368636-C
G337
Flat Utility Chisel
Your representative can give you details
on product availability and shipping requirements!
Order
Mult.
Weight
1/0/3
1.450
Unit
Cost
10.49 EA
permanently molded to steel tool to protect against misplaced
blows. Comfortable hand grip helps absorb shock and
vibration. Ideal for scoring, cutting, and trimming bricks
and blocks. Size: 3-1/2" x 7".
Product
No.
Mfg.
No.
Description
368652-C
G436
3-1/2x7 Brick Set
Order
Mult.
Weight
1/0/3
1.850
Unit
Cost
10.49 EA
10-21
HAND TOOLS
Mason Chisel - Designed for cutting cement block, cinder block, brick
and veined stone such as Arizona, crab
orchard, etc. Thin, strong blade assures clean
work and is easily sharpened. Target head
design. 7-1/2" long.
HAND TOOLS
CHISELS
CHSI ELS
CHISELS
TargetGuard™ Floor Chisel - Durable, yellow plastic guard is
permanently molded to high-carbon steel tool to protect against
misplaced blows. Comfortable hand grip helps absorb shock
and vibration. Rugged, thin blade for rough cutting and
trimming of hard and soft woods and removing
tongue-and-groove flooring. Size: 3" x 11".
FatMax® 6-Piece Wood Chisel Set - Hardened and tempered
high chrome carbon alloy steel blade for edge retention. Blade edge
honed, ready for use. Descriptive etch mark
displaying blade size. Precision ground blade, for
accurate sizes. Patented, ergonomically designed,
break-resistant, bi-material grip handle. Steel
striking cap for use with steel headed hammer.
Reusable, try-me hang tag packaging with blade
guard protection in store; screw rack wall storage at
home. Overall length 9". Set includes (1) each of the
following chisels: 1/4" (model No. 16-973), 1/2"
(model No. 16-975), 3/4" (model No. 16-977), 1"
(model No. 16-978), 1-1/4" (model No. 16-979), and
1-1/2" (model No. 16-980).
Dasco
Product
No.
Mfg.
No.
Description
368660-C
G473
3x11 Floor Chisel
Order
Mult.
Weight
1/0/3
1.850
Unit
Cost
14.79 EA
CHSI ELS
3-Piece Wood Chisel Set - Hardened and tempered chrome
carbon steel blade, precision ground. Impact-resistant bi-material
handle. Full length blade guard to
protect edges when not in use. Set
includes 1 each of the following chisels:
1/2" (model No. 16-308), 3/4" (model
No. 16-312), and 1" (model No.
16-316).
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321280-C
16-300
3pc Wood Chisel Set
1/2/12
1.558
Product
No.
Mfg.
No.
Description
323206-B
16-971
6pc Fm Wood Chisel Set
Order
Mult.
Weight
1/0/6
4.683
Unit
Cost
69.99 SET
CHISELS
Unit
Cost
Wood Turning Tool Set - Blades are made of high-quality forged
tool steel, correctly hardened, ground with proper bevels,
and polished. Blades are securely fitted with
long tangs into special designed natural finish
hardwood handles. Blades are 6-1/2" long,
handles are 10-1/2" long. Set contains: 1"
gouge, 5/8" gouge, 3/8" gouge, 1/2" round
nose, 1/2" spear point, 1" skew chisel, 1/2"
skew chisel, 1/8" parting tool.
25.99 SET
CHSI ELS
FatMax® 3-Piece Wood Chisel Set - Hardened and tempered
high chrome carbon alloy steel blade for edge retention. Blade edge
honed, ready for use. Descriptive etch mark displaying
blade size. Precision ground blade, for accurate sizes.
Patented, ergonomically designed, break-resistant,
bi-material grip handle. Steel striking cap for use with
steel headed hammer. Reusable, try-me hang tag
packaging with blade guard protection in store; screw
rack wall storage at home. Overall length 9". Set
includes (1) each of the following chisels: 1/2" (model
No. 16-975), 3/4" (model No. 16-977), and 1" (model
No. 16-978).
Product
No.
Mfg.
No.
Description
323171-B
16-970
3pc Fm Wood Chisel Set
10-22
Order
Mult.
Weight
1/0/6
1.233
Unit
Cost
29.99 SET
Product
No.
Mfg.
No.
Description
314298-C
800
Wood Turning Tools
Order
Mult.
Weight
1/0/6
6.200
Unit
Cost
99.99 SET
FI LES
Draw Shave - A multipurpose tool for the woodworking industry. Knife
is cut from a solid bar of high-carbon
spring steel. The blade is precision
ground and sharpened to a fine working
edge. Handles are kiln dried ash with a
lacquer finish. Blade may be
resharpened with a stone. Tool is
versatile enough in size to be used on
logs, or for use in furniture making and
crafting.
Product
No.
Mfg.
No.
Description
716189-C
716480-C
716669-C
49941
49931
49951
8"
10"
13"
Order
Mult.
Weight
1/0/5
1/0/5
1/0/4
3.117
3.500
3.367
Unit
Cost
37.49 EA
41.49 EA
47.49 EA
Service is our priority!
Our commitment is to meet your needs!
HAND TOOLS
FILES
FLI ES
FI LES
Cooper Tools
Cooper Tools
Mill Bastard File - Single-cut. For sharpening mill or circular saws,
Slim Taper File - Single-cut. Bulk.
draw-filing and finishing metals. Tapered slightly in width.
12", 14" tapered slightly in thickness for 1/3 of length. 2
square edges. Single-cut on sides and edges. Bulk.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305173-C
305182-C
14224
14255
6" L. x 11/32" W.
7" L. x 13/32" W.
1/0/12
1/0/12
.083
.146
Unit
Cost
4.79 EA
5.99 EA
FI LES
Cooper Tools
Product
No.
Mfg.
No.
304986-C
304995-C
305002-C
305011-C
305020-C
305039-C
08243
08354
08497
08642
08737
08832
Description
Order
Mult.
Weight
4"
6"
8"
10"
12"
14"
1/0/12
1/0/12
1/0/12
1/0/12
1/0/6
1/0/6
.042
.104
.229
.458
.792
1.167
Unit
Cost
4.99 EA
4.99 EA
5.99 EA
7.79 EA
12.49 EA
16.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305191-C
305208-C
305217-C
305226-C
14547
14599
14665
14698
4" L. x 3/16" W.
5" L. x 15/16" W.
6" L. x 9/32" W.
7" L. x 5/16" W.
1/0/12
1/0/12
1/0/12
1/0/12
.021
.042
.063
.104
Unit
Cost
4.79 EA
4.79 EA
4.99 EA
5.99 EA
FI LES
Cooper Tools
Double Extra Slip Taper File - Single-cut. Bulk.
FLI ES
Cooper Tools
Mill Smooth File - Mill bastards with a smooth cut. Bulk.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305244-C
15024
6" L. x 7/32" W.
1/0/12
.042
Unit
Cost
5.29 EA
FI LES
Cooper Tools
Half-Round Bastard File - Double-cut. Use on concave, convex
and flat surfaces. Bulk.
Product
No.
Mfg.
No.
305057-C
08560
Description
Order
Mult.
Weight
8"
1/0/12
.229
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305280-C
305299-C
305306-C
04896
04995
05094
8"
10"
12"
1/0/12
1/0/6
1/0/6
.271
.458
.875
Unit
Cost
13.49 EA
16.79 EA
21.49 EA
FI LES
8.99 EA
Cooper Tools
Round Bastard File - Double-cut. To file circular openings or
FLI ES
Cooper Tools
Flat Bastard File - For rapid removal of metal. Rectangular in cross
section, taper slightly towards point in width and thickness.
Double-cut on sides, single-cut on edges. Bulk.
concave surfaces. Bulk.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305315-C
305324-C
305333-C
305342-C
305351-C
11526
11716
11904
12019
12134
4"
6"
8"
10"
12"
1/0/12
1/0/12
1/0/12
1/0/12
1/0/6
.021
.083
.125
.271
.542
Unit
Cost
6.29 EA
6.29 EA
6.99 EA
8.99 EA
12.49 EA
FI LES
Cooper Tools
Carded Files - Without handles. First-quality Nicholson files carded for
self-service.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305093-C
305100-C
305119-C
03566
03665
03764
8"
10"
12"
1/0/12
1/0/6
1/0/6
.292
.625
.958
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
Unit
Cost
8.99 EA
11.49 EA
15.49 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
309567-C
21857
8" half-round bastard file
1/6/12
.333
Unit
Cost
12.99 EA
10-23
HAND TOOLS
Extra Slim Taper File - Single-cut. Bulk.
HAND TOOLS
FILES
Continued From Previous Column
FLI ES
Cooper Tools
Knife Bastard File - Double-cut on sides and single-cut on sharp
Product
No.
Mfg.
No.
edge. Bulk.
303139-E
303139
303148-E
303148
303157-F
303157
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305431-C
06804
Knife Bastard File
1/0/12
.083
Unit
Cost
13.49 EA
Description
Use for 6" to 8" files, 4-1/4"
long, 1-1/4" diameter, size
No. 3
Use for 8" to 10" files, 4-3/4"
long, 1-1/8" diameter, size
No. 4
Use for 10" to 14" files, 5"
long, 1-1/4" diameter, size
No. 5
Order
Mult.
Weight
Unit
Cost
1/12/72
.200
2.79 EA
1/12/72
.200
2.79 EA
1/12/72
.125
3.49 EA
FLI ES
Cooper Tools
FI LES
Cabinet Rasp - Used by cabinet makers and woodworkers. Curved
side of these rasps is similar to half-round rasps
but has a larger radius. Single-cut on
edges. Coarseness: Secondcut. Bulk.
V & B Mfg. Co.
Do it™ File Handle - Long ferrule. Will not split nor can ferrule come
off.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305468-C
17615
8"
1/0/12
.250
Unit
Cost
19.49 EA
FLI ES
Cooper Tools
Shoe Rasp - 4-in-1. File and rasp section on flat side; file and rasp
section on half-round side. Bulk.
Product
No.
Mfg.
No.
Description
305495-C
305510-C
18924
18962
8"
10"
Order
Mult.
Weight
1/0/6
1/0/6
.333
.625
Unit
Cost
Product
11.49 EA No.
14.49 EA 303166-E
Mfg.
No.
303166
303175-D
303175
FLI ES
V & B Mfg. Co.
Do it™ File Card - Sharp steel bristles remove filings from grooves of
Description
6" to 8" size, 4-1/2" long, 1-1/
4" diameter
8" to 12" size, 5" long, 1-3/8"
diameter
Order
Mult.
Weight
Unit
Cost
1/12/72
.200
2.79 EA
1/12/72
.200
2.99 EA
FI LES
General Tools
files to restore their clean cutting capacity. 8" long.
Thread Repair Files - Restore damaged external threads on studs,
bolts, screws, plumbing pipe, and pipe fittings.
Restores rusted and corroded
fasteners. Doubles as a screw pitch
guide. Length 8-1/2" x 7/16".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
323020-D
323020
8" Card File
1/0/12
.400
Unit
Cost
7.99 EA
FLI ES
V & B Mfg. Co.
Do it™ File Handle - Short ferruled soft wood file handle. Metal
ferrules.
Product
No.
Mfg.
No.
363154-E
89212
303111-E
303111
303120-F
303120
Description
Use for chain saw files, 3-1/
2" long, 13/16" diameter
Use for 3" to 4" files, 3-1/2"
long, 13/16" diameter, size
No. 1
Use for 4" to 6" files, 4" long,
15/16" diameter, size No. 2
Order
Mult.
Weight
Unit
Cost
1/12/72
.200
2.49 EA
1/12/72
.200
2.29 EA
1/12/72
.200
2.79 EA
Product
No.
Mfg.
No.
320390-C
177-1
320404-C
177-2
Description
Thread pitches: 11, 12, 13,
14, 16, 18, 20, 24 threads
per inch
Thread pitches: 9, 10, 12,
16, 20, 27, 28, 32 threads
per inch
Order
Mult.
Weight
1/0/6
.343
Unit
Cost
9.79 EA
1/0/6
.343
9.79 EA
PLAN ES
General Tools
Swiss Pattern Needle File Set - A 4-piece set designed for
exacting requirements of tool and die makers, jewelers, watchmakers, and
hobbyists. Set includes 3 file shapes: Flat,
round, and triangular. High quality steel
measures 5-1/2" long. Includes a 5-1/2"
knurled aluminum handle for an overall length
of 8-1/2".
Product
No.
Mfg.
No.
Description
320412-C
S477
Needle File Set
Order
Mult.
Weight
1/0/5
.150
Unit
Cost
8.29 SET
Continued Next Column
10-24
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
PLANES
PLANES
Plane - Alloy tool steel cutters, razor-sharp, fully adjustable. Lever cap
reduces weight, adds longer life.
Bottom and sides machined and
polished. Rigid construction and
vibration-proof. Screw adjusts for
different cuts. 2" cutter.
Product
No.
Mfg.
No.
Description
315395-D
315279-C
C4
C5
Bench plane, 9" frame
Jack plane, 14" frame
Order
Mult.
Weight
1/0/6
1/0/6
4.292
4.750
RB5™ Plane - Dual blade positioning for regular planing and bull nose
work into corners. Easy to adjust and set
depth of cuts. Compact size for narrow
work areas. Contoured to fit the palm of
your hand. Quick and easy blade
change, no honing required.
Convenient blade storage in the handle.
Comes with 2 disposable replacement
blades. 3 different replacement blades
available for bullnose work, regular
planing, and work on plastics and
laminates.
Unit
Cost
39.99 EA
47.99 EA Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
12-105
Mini Block Plane
1/2/12
1.008
Unit
Cost
PLANES
321538-C
12.99 EA
PLANES
Mini Block Plane - Adjustable, for precision working. Alloy tool steel
cutter sharp and true, hardened and tempered.
Cast-iron body, enamel finish. Packed on card. 1"
cutter.
Replacement Blade for RB5™ Plane - Replacement blades for
model No. 12-105 RB5™ plane. Straight for rebating or narrow edges.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321574-D
12-378
Straight Plane Blade
1/0/10
.300
Unit
Cost
3.49 EA
PLANES
Surform® Plane - Regular cut blade. Forms and trims wood,
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
330573-D
LSO
Mini Block Plane
1/6/48
.026
Unit
Cost
7.79 EA
PLANES
Block Plane - For everyday work not requiring frequent adjustment.
Steel screw makes cutter adjustable for
thickness of cut. Bottom and sides
milled and polished. 7" long, 1-5/8"
cutter.
plywood, composition board, asphalt tile, hard rubber,
plastic aluminum, brass. Aluminum
body, 10" long with solid hardwood
handle and knob. Uses replacement
blade model No. 21-293, 21-299 and
21-393.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315536-C
21-296
Regular Surform Plane
1/4/36
1.052
Unit
Cost
16.49 EA
PLANES
Surform® File - Regular cut blade. 16-5/8" overall length. For surface
Product
No.
Mfg.
No.
315439-D
G2
Description
Order
Mult.
Weight
7" Block Plane
1/0/12
1.635
Save time by letting us locate those
hard-to-find items for you!
Unit
Cost
forming wood, plastics, leather and soft
metals. Uses replacement blade model
No. 21-293.
24.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315493-C
21-295
16-4/5" File
1/0/6
.896
Unit
Cost
14.49 EA
10-25
HAND TOOLS
PLANES
HAND TOOLS
PLANES
PLANES
PLAN ES
Surform® File - For surface forming wood, plastics, leather and soft
Surform® Shaver - 1-handed tool that shaves, trims and shapes,
metals. 5/8" diameter round. Length: 14".
Refer to model No. 21-291 for
replacement blade.
wood, plaster, plastic, aluminum and painted surfaces.
Gets into curves, corners, tight places.
Plastic handle. Extra blade packed with
each tool. Individually carded. Refer to
model No. 21-515 for replacement
blade.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315518-C
21-297
14" Round File
1/2/12
.365
PLANES
Unit
Cost
Product
13.49 EA No.
332081-D
Mfg.
No.
Description
Order
Mult.
Weight
21-115
Surform Shaver
1/4/24
.208
Unit
Cost
4.79 EA
PLAN ES
Surform® File Replacement Blade - For model No. 21-297
round file 5/8" diameter.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315527-C
21-291
Surform File Blade
1/6/72
.115
Unit
Cost
7.49 EA
PLANES
Surform® Tool - 5-1/2" long. Trims and forms wood, metal and
plastics. Die-cast body with short blade, fine cut
teeth. Carded individually. Refer to
model No. 21-398 for replacement
blade.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315554-C
21-399
Surform Pocket Plane
1/4/24
.510
Surform® Shaver Replacement Blade - Replacement blade
for Surform® shaver model No. 21-115. 1 blade per card.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
300757-D
21-515
Shaver Blade
1/6/36
.012
Unit
Cost
3.79 CD
PLAN ES
Surform® Replacement Blade - Extra blades for Surform® file
and Plane. Regular cut best for all wood and compositin
surfaces; half-round regular cut best for forming and
smoothing concave and circular surfaces; fine cut blade best
for metal cutting and hard, smooth surfaces.
Unit
Cost
7.29 EA
PLANES
Surform® Tool Replacement Blade - Replacement blade for
model No. 21-399 Surform® tool.
Product
No.
Mfg.
No.
315616-D
315625-D
21-293
21-299
315634-C
21-393
Description
Flat blade type, regular cut
Half-round blade type,
regular cut
Flat blade type, fine cut
Order
Mult.
Weight
Unit
Cost
1/4/24
1/6/72
.115
.125
5.99 EA
5.99 EA
1/0/6
.125
5.79 EA
PLAN ES
Elmer’s Prod.
Standard Craft Tool Set - For forming, shaping, whittling, carving
and overall woodworking. Contains 3 knives, block sander,
spokeshave, block plane, balsa stripper, 2
routers, 4 gouges, 9 assorted blades. Boxed.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315563-D
21-398
Replacement Blade
1/4/24
.075
Unit
Cost
5.29 EA Product
No.
329120-D
10-26
Mfg.
No.
Description
X5086
Standard Craft Set
Order
Mult.
Weight
0/0/1
1.310
Unit
Cost
59.99 SET
We can become your single-source supplier
on many of the products you currently use!
HAND TOOLS
HOBBY KNIVES
Hob yKnives
XACTO OT OLS
Elmer’s Prod.
Elmer’s Prod.
Basic Craft Tool Set - For cutting, whittling, carving, sawing and
Hobby Blade - Sharp angle for detail cutting, trimming and stripping.
shaping wood or plastic. Includes 2 knives, pointed
tweezer, jeweler’s screwdriver, block
plane, razor saw blade and 10 assorted
standard blades. Boxed.
Packed 5 on card. For use in model No. X3201
knife.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305716-D
X211
5cd Hobby Blade
1/0/12
.021
Unit
Cost
2.79 CD
XACTO OT OLS
Elmer’s Prod.
Hobby Blade - Blunt angle for light chiseling and rough shaping,
Product
No.
Mfg.
No.
Description
314889-C
X5076
Basic Craft Set
Order
Mult.
Weight
0/0/1
2.600
Unit
Cost
39.99 SET
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303615-D
X219
5cd Hobby Blade
1/0/12
.037
Unit
Cost
3.29 CD
XACTO OT OLS
Elmer’s Prod.
XACTO TO LS
Elmer’s Prod.
Basic Knife Set - For cutting wood, board, paper, plastic, film/acetate
and cloth. Includes 3 knives and 10 assorted
blades. Boxed.
Hobby Blade - Sharp angle for precision cutting of medium to
heavyweight materials. Packed 5 on card. For use in
model No. X3202 or X3205 knife.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
317128-D
X202
5cd Hobby Blade
1/0/12
.026
Unit
Cost
2.99 CD
XACTO OT OLS
Elmer’s Prod.
Hobby Blade - For close corner cuts on templates and mats. For
Product
No.
Mfg.
No.
Description
314870-D
X5282
Basic Knife Set
Order
Mult.
Weight
1/0/6
.020
Unit
Cost
deburring, stripping and gasket cutting. Packed 5
on card. For use in model No. X3202 or X3205
knife.
27.99 SET
XACTO TO LS
Elmer’s Prod.
No. 1 Precision Knife - 4-7/8" aluminum handle with No. 11 blade
for delicate precision cutting of lightweight material.
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303623-D
X224
5cd Hobby Blade
1/0/12
.026
Unit
Cost
2.99 CD
XACTO OT OLS
Elmer’s Prod.
Hobby Blade - For long heavy pressure cuts and general initial
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
304183-D
X3201
#1 Precision Knife
1/0/12
.063
Unit
Cost
3.49 CD
XACTO TO LS
Elmer’s Prod.
No. 2 Precision Knife - 5" aluminum handle with No. 2 blade for
precision cutting of medium to heavyweight material.
shaping in woodworking, whittling, carving,
trimming and slicing. Packed 5 on card. For use in
model No. X3202 or X3205 knife.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
306298-D
X222
5cd Hobby Blade
1/0/12
.034
Unit
Cost
5.49 CD
XACTO OT OLS
Techni Edge Mfg.
No. 1 Hobby Knife - 4-7/8" aluminum handle with No. 11 blade for
delicate precision cutting of lightweight material.
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
304423-D
X3202
#2 Precision Knife
1/0/12
.099
XACTO TO LS
Unit
Cost
4.99 CD Product
No.
Elmer’s Prod.
322180-D
Mfg.
No.
Description
01-012
#1 Hobby Knife
Order
Mult.
Weight
1/10/100
.100
Unit
Cost
1.99 EA
No. 5 Precision Knife - 4-1/4" plastic handle with No. 19 blade for
precision, heavy pressure cutting of heavyweight
materials. Contoured handle for sure
grip. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303607-D
X3205
#5 Precision Knife
1/0/12
.120
The product representations in this catalog are for reference only,
and are subject to change without notice.
Unit
Cost
6.49 CD
10-27
HAND TOOLS
deburring or trimming. Packed 5 on card. For use in
model No. X3202 and X3205 knife.
HAND TOOLS
HOBBY KINIVES
Hoby Kin ves
XAC TOTO OLS
Techni Edge Mfg.
Techni Edge Mfg.
No. 2 Hobby Knife - 5" aluminum handle with No. 24 blade for
Hobby Blade Assortment - For use in model No. 2 hobby knife.
Includes 2 model No. 24 and 1 each model No. 18, 19, and 22
blades. Carded.
precision cutting of medium to heavyweight material.
Carded.
Product
No.
Mfg.
No.
Description
322245-D
01-022
#2 Hobby Knife
Order
Mult.
Weight
1/10/100
.120
Unit
Cost
2.49 EA
XACTO TO LS
Techni Edge Mfg.
No. 11 Hobby Blades - Sharp angle for detail cutting, trimming, and
stripping. Packed 5 on a card. For use in model No.
01-102 knife.
Product
No.
Mfg.
No.
Description
324000-D
01-215
Hobby Blade Assortment
Order
Mult.
Weight
1/10/100
.020
Unit
Cost
2.29 CD
XAC TOTO OLS
Wen/Div. of Great Lakes Tool
Product
No.
Mfg.
No.
Description
322288-E
01-113
5cd #11 Hobby Blades
Order
Mult.
Weight
1/10/200
.020
Unit
Cost
1.29 CD
XACTO TO LS
Techni Edge Mfg.
Electric Engraver - Use like a pencil to write, draw, engrave on wood,
metals, plastics, and glass. Variable stroke adjustment for
heavy or fine engraving. Tungsten carbide tip for long life
and clean lines. 6’ cord.
No. 24 Hobby Blades - For close corner cuts on templates and
mats. For deburring, stripping, and gasket cutting. Packed 5
on a card. For use in model No. 01-022 knife.
Product
No.
Mfg.
No.
Description
322296-D
01-243
5cd #24 Hobby Blades
Order
Mult.
Weight
1/10/200
.020
Unit
Cost
1.29 CD
XACTO TO LS
Techni Edge Mfg.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Hobby Knife Set - For cutting wood, paper, plastic, and cloth.
Includes 1 each of No. 1 knife, No. 2 knife, No. 5
knife, and 10 assorted blades in a
wooden storage box. Carded.
313271-B
21B
Engraver
1/6/48
.594
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
319201-D
01-801
Hobby Knife Set
1/0/10
.613
XACTO TO LS
Unit
Cost
9.99 EA
XAC TOTO OLS
Electric Engraver - Writes like a pencil on any material. Marks
permanently on any surface from hardened steel to
glass. High-speed, reciprocating motor
delivers 7200 strokes per minute.
Calibrated stroke adjustment dial
regulates length of stroke, depth of
engraving from fine lines to deep
marks. Pencil grip for precise control;
durable nylon housing with handy
hanger. Solid carbide point practically
wearproof. 115V, 60Hz AC only.
Unit
Cost
16.49 SET Product
No.
Techni Edge Mfg.
355699-B
Mfg.
No.
Description
290-01
Engraver
Order
Mult.
Weight
1/0/2
.750
Unit
Cost
19.99 EA
Hobby Blade Assortment - For use in No. 1 hobby knife. Includes
2 No. 11 and 1 each No. 10, 16, and 17 blades. Carded.
Product
No.
Mfg.
No.
Description
323586-D
01-115
Hobby Blade Assortment
10-28
Order
Mult.
Weight
1/10/200
.020
Unit
Cost
1.99 CD
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
RULES/TAPE MEASURES
RULES/ TA PEMEASURES
RULES/TAPE MEA SURES
Cooper Tools
Cooper Tools
8-Piece 25W Hobby Kit - Mini iron with pencil handle. Ideal for
Engineers Rule - Engineer’s markings: Feet, 10th, 100ths feet on 1
side in red. Other side: Regular feet, inches to
16ths in black. White finish. Blade and
markings protected by longer wearing
epoxy finish. Markings embedded into
wood. Solid brass joints, strike plates,
and end caps. 6’ long.
wood burning, hobbies, and crafts. Also ideal for jewelry,
model railroads, and micro electronics. Develops 750° F./
400° C temperature. Stainless steel barrel and heat and
impact-resistant handle. Important: Use only Weller®
tips. UL listed.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321672-C
1066D
Engineer Wd Folding Rule
1/6/144
.292
Unit
Cost
12.49 EA
Cooper Tools
Regular Folding Rule - Sections 5/8" wide. 6" folds. White finish.
Product
No.
Mfg.
No.
Description
307171-C
WSB25HK
25w Woodburning Tool
Order
Mult.
Weight
1/0/6
.500
Unit
Cost
17.99 EA
RULES/ TA PEMEASURES
General Tools
Marked both edges, both sides. Markings embedded into
wood. 16" centers marked in red. Blade
and markings protected by longer
wearing epoxy finish. Solid brass joints,
strike plates, and end caps. 6’ long.
Stainless Steel Ruler - Precision made with etched fine black
graduations on stainless steel. Carded.
Product
No.
Mfg.
No.
355056-D
676
318795-D
616
Description
6", rigid. Graduated in 8ths
and 16ths on 1 side.
Graduated in 32nds and
64ths on other side. 3/4"
wide.
6", flexible. Graduated in
10ths and 100ths on 1 side.
Graduated in 32nds, and
64ths on other side. 15/32"
wide.
Order
Mult.
Weight
1/0/12
.063
Unit
Cost
6.99 EA
1/0/12
.030
5.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321645-C
321654-B
066
066F
Regular marking
Inside marking
1/6/144
1/6/144
.292
.125
Unit
Cost
9.99 EA
9.99 EA
RULES/TAPE MEA SURES
Cooper Tools
Brick Masons Rule - 1 side marked vertical figures. Consecutive
inches to 16th. Other side marked into 10 brick spacing
scales. Blade and markings protected
by longer wearing epoxy finish.
Markings embedded into wood. White
finish. Solid brass joints, strike plates,
end caps. 6’ long.
RULES/ TA PEMEASURES
General Tools
6" Stainless Steel Rule - With depth gauge and pocket clip. Width
1/2". Front has quick reading 32nds and 64ths graduations.
Back has decimal equivalents. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321761-C
636
Brk Masn Wd Folding Rule
1/6/72
.375
Unit
Cost
17.49 EA
RULES/TAPE MEA SURES
Cooper Tools
Modular Spacing Rule - 1 side marked consecutive inches to
Product
No.
Mfg.
No.
Description
321896-D
300/1
6" Ss Tape Rule
Order
Mult.
Weight
1/0/6
.307
Unit
Cost
2.99 EA
RULES/ TA PEMEASURES
General Tools
12" Stainless Steel Rule - Industrial quality rule has etched fine
black graduations on stainless steel. Flexible 12" rule is
graduated in 16ths, 32nds, and 64ths
on 1 side. The other side is graduated
in 8ths and 16ths. 7/8" wide. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
318809-D
1201ME
12" Ss Ruler
1/0/6
.200
Some products shown may need to be special ordered
for your convenience!
Unit
Cost
7.99 EA
16ths. Other side marked into 6 scales for various brick and
block on 16" module. Blade and
markings protected by longer wearing
epoxy finish. Markings embedded into
wood. White finish. Solid brass joints,
strike plates, end caps. 6’ long.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333801-C
646
Wood Folding Rule
1/6/144
.375
Unit
Cost
17.49 EA
RULES/TAPE MEA SURES
Cooper Tools
2-Way Rule - Reads right to left, 1 side; left to right, other side. Inside
markings, flat reading. Markings
embedded into wood, solid brass
joints, strike plates, end caps. White
finish. Consecutive inches to 16ths
inch 16" centers marked in red. Blade
and markings protected by
longerwearing epoxy finish. 6’ long.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321681-C
966
Wood Folding Rule
1/6/144
.290
Unit
Cost
12.49 EA
10-29
HAND TOOLS
RULES/TAPE MEA SURES
HAND TOOLS
RULES/TAPE MEASURES
RULES/TAP EME ASURES
RU LES/TAPE MEASU RES
Cooper Tools
Komelon USA Corp
Spring Joint Log Rule - 6" sections. For logs up to 48" diameter.
Stainless Steel Tape Rule - 1" x 25’ nylon-coated blade for
maximum durability. Ergonomic satin chrome case with molded rubber
grip. All metallic componets are
stainless steel for improved rust
resistance. Stainless steel colored
blade. Carded.
White finish. Brass plated mountings, lock joints.
Folding hook. Marked outside for 10’
and 18’ logs and lower edge inches to
16ths. Marked inside for 12’, 14’ and 16’
logs. Blade and markings protected by
longer wearing epoxy finish. Doyle
scale. 4’ long.
Product
No.
Mfg.
No.
Description
321878-C
524
4 Log Scale Rule
Order
Mult.
Weight
1/0/6
.208
Unit
Cost
15.79 EA
RULES/TAP EME ASURES
Cooper Tools
Extension Rules - Red end. Boxwood finish. Heavy-duty, 1/8" thick
sections. Marked both edges, both sides. Markings
embedded into wood. Consecutive
inches to 16ths. 16" centers marked in
red. Blade and markings protected by
longer wearing epoxy finish. Graduated
brass slide. 6" folds. Rivet joints.
Product
No.
Mfg.
No.
321789-C
321814-C
321805-C
X46
X48
HX46
321798-C
X46F
Description
6’ long, with regular marking
8’ long, with regular marking
(With hook) 6’ long, with
regular marking
6’ long, with inside marking
Order
Mult.
Weight
1/6/144
1/0/6
1/0/6
.394
.500
.333
16.49 EA
25.49 EA
26.99 EA
1/6/144
.417
16.49 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
352098-B
SS251
1"x25 Ss Tape Rule
1/12/24
1.210
Unit
Cost
14.99 EA
RU LES/TAPE MEASU RES
DIB Tool Imports
Do it Best® Long Tape Rule - Yellow impact-resistant plastic case
with cushion grip. 3/8" yellow steel blade with easy-to-read
black and red markings. Hook ring tape
end. Belt clip. Carded.
Unit
Cost
RULES/TAP EME ASURES
Komelon USA Corp
Metric English Tape Rule - Ergonomic case for comfortable grip.
Impact-resistant case. Nylon-coated blade for maximum
durability. Triple riveted end hook.
English metric scale blade. Hi-Vis
yellow case. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
306614-C
306576-D
306614
306576
3/8" x 50’
3/8" x 100’
1/6/36
1/6/36
.672
1.069
Unit
Cost
9.29 EA
13.49 EA
RU LES/TAPE MEASU RES
FatMax® Open Reel Tape - 3:1 gear drive for fast rewind. Extra
wide 3/4" x 100’ fiberglass blade with PVC clear coat for
abrasion resistance. 2 sided blade
graphics in fractional inch/decimal foot
scales. Double reinforced blade end.
Cushion-grip handle. Loop and end hook
for secure anchoring.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
324612-D
324620-D
324701-C
4912IM
4916IM
4925IM
5/8" x 12’/3.6m
3/4" x 16’/5m
1" x 25’/7.5m
1/12/48
1/12/48
1/12/24
.276
.244
.857
Unit
Cost
3.49 EA
4.99 EA
6.99 EA
RULES/TAP EME ASURES
Komelon USA Corp
MagGrip™ Tape Rule - Nylon-coated blade for maximum abrasion
Product
No.
Mfg.
No.
Description
resistance and magnetic end hook. Magnetic tip sticks to
any ferrous metal surface. Impact
resistance ABS with molded rubber
grip. Positive lock holds blade securely
at any position. Built-in rubber bumper.
Black rubber-grip on a yellow case.
Carded.
321360-B
34-812
100 Fatmax Tape Rule
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
352071-B
7425
1" x 25’
1/12/24
1.116
10-30
Order
Mult.
Weight
1/2/8
2.525
Unit
Cost
36.99 EA
Unit
Cost
11.99 EA
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
RULES/TAPE MEASURES
RULES/ TA PEMEASURES
RULES/TAPE MEA SURES
DIB Tool Imports
FatMax® Long Tape - FatMax®, 200’ nylon clad fiberglass long tape Do it® Open Reel Tape - Moisture-resistant fiberglass tape is
Product
No.
Mfg.
No.
Description
331466-B
34-822
200 Fatmax Long Tape
Order
Mult.
Weight
1/2/8
3.963
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
62.99 EA
376167-D
376175-C
376183-C
376167
376175
376183
1/2" x 100’
1/2" x 200’
1/2" x 300’
1/6/24
1/6/24
1/6/24
1.558
2.292
3.208
RULES/ TA PEMEASURES
Powerwinder Open Reel Tape - 3:1 gear drive for fast rewind. 1/
2" fiberglass blade with PVC clear coat for abrasion resistance.
Slip-resistant rubber grip handle. 2 sided blade with
fractional inch/decimal foot scales. Loop and end
hook for secure anchoring.
Product
No.
Mfg.
No.
Description
321379-C
321388-C
34-760
34-762
100’
300’
Order
Mult.
Weight
1/2/8
1/2/8
2.063
4.038
Unit
Cost
14.99 EA
19.99 EA
34.99 EA
RULES/TAPE MEA SURES
Starrett, L. S.
Key Caddy - Heavy chrome-plated case with belt clip attached.
Stainless steel chain and large key ring. Key
carrier that returns keys automatically.
Unit
Cost
17.99 EA Product
No.
34.99 EA
309362-D
Mfg.
No.
Description
Order
Mult.
Weight
SK1
Key Caddy
1/6/36
.333
Unit
Cost
9.99 EA
RULES/ TA PEMEASURES
RULES/TAPE MEA SURES
MaxSteel™ Nylon Clad Open Reel Steel Tape - 3:1 gear
drive for fast rewind. 1/2" x 100’ nylon coated steel blade. Slip-resistant
rubber grip handle. Loop and end hook for secure
anchoring. Fractional inch blade.
Product
No.
Mfg.
No.
Description
321413-B
34-764
100 Nylonclad Tape Rule
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
Order
Mult.
Weight
1/2/8
2.475
Unit
Cost
Cooper Tools
Tape Rule - Durable, lightweight case. Manually operated, Yellow clad
blade, black numerals and graduations.
Self-adjusting end hook. Uses standard
Lufkin replacement blades.
Product
No.
Mfg.
No.
Description
320995-C
Y8212
1/2" x 12’
Order
Mult.
Weight
1/0/6
.292
Unit
Cost
9.29 EA
34.99 EA
10-31
HAND TOOLS
vinyl-coated with heat sealed graduations. Rotating spool
with extended rewind handle. Printed on 2
sides-first side in feet, inches, and 8ths;
second side in 10ths of feet. Easy-to-read,
nonconductive, 1/2" wide, white blade. End
hook for secure anchoring. Hi-Vis orange case.
with extra strength fiberglass and 3" to 4" wide
blade. 3 to 1 gear ratio for easier winding. New
comfort-grip.
HAND TOOLS
RULES/TAPE MEASURES
RULES/TAP EME ASURES
RU LES/TAPE MEASU RES
Cooper Tools
Cooper Tools
HI-VIS Tape Rule - Hi-Viz® orange case. Toggle lock. Cushioned
Fiberglass Tape Rule - Tufboy® fiberglass tape in high-visibility
blaze orange case. Designed for use on construction
sites, road building, police work and
surveying. Tough PVC-coated steel blades
resist moisture, oil and chemicals. Black
and red markings on yellow background, 1
side only. Graduated in 1/8ths. 1/2" x 100’.
blade return. Removable belt clip. Bright yellow
blade.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
349992-C
351776-C
370991-C
344826-C
HV1012
HV1312
HV1425
HV1433
1/2" x 12’
3/4" x 16’
1" x 25’
1" x 33’
1/0/6
1/6/36
1/6/36
1/6/24
.300
.536
.936
.057
Unit
Cost
5.49 EA
7.99 EA
11.49 EA
13.49 EA Product
No.
RULES/TAP EME ASURES
321217-C
Cooper Tools
Mfg.
No.
Description
706L
1/2"x100 Tape Rule
Order
Mult.
Weight
1/0/6
1.500
Unit
Cost
17.99 EA
RU LES/TAPE MEASU RES
Pro Series Long Steel Tape - 3/8" x 100’ Pro Series 3:1 ratio long Cooper Tools
steel tape. 3:1 gear ratio for fast blade retrieval. Precise,
Tape Rule - Yellow blade. Polystyrene case. Easy wind nylon drum.
easy-to-read black and red blade
Hook ring. Easy-to-read black and red
markings. Premium steel blade resists
markings. 3/8" x 100’, uses
kinks.
replacement blade model No. OY100.
Product
No.
Mfg.
No.
Description
339324-B
PS100S
3/8x100 Steel Long Tape
Order
Mult.
Weight
1/0/5
1.060
Unit
Cost
24.99 EA Product
No.
RULES/TAP EME ASURES
Cooper Tools
319426-C
Open Reel Fiberglass Tape Rule - Hi-Viz® orange linear
fiberglass tape. Lightweight open reel is easy-to-handle and rewind.
Yellow clad blade with black and red markings 1 side
only. Graduated feet and inches to 1/8the; numbered
with feet and instantaneous foot markings in red and
inches in black.
Product
No.
Mfg.
No.
339351-C
339404-B
1706
1708
10-32
Description
Order
Mult.
Weight
1/2" x 100’
1/2" x 200’
1/0/6
1/0/2
1.150
2.300
Mfg.
No.
Description
Order
Mult.
Weight
100L
3/8"x100 Tape Rule
1/6/36
.167
Unit
Cost
21.99 EA
RU LES/TAPE MEASU RES
Economy 6’ Tape Rule - In compact, lightweight case. 1/2" wide
white blade clad in Mylar® to resist oil, abrasives,
and dirt.
Product
No.
Mfg.
No.
Description
350220-C
30-506
1/2"x6 Tape Rule
Order
Mult.
Weight
1/10/100
.150
Unit
Cost
4.29 EA
Unit
Cost
16.99 EA
23.99 EA
Your representative can give you details
on product availability and shipping requirements!
RULES/TAPE MEA SURES
10’ Tape Rule - 1/4" wide tape rule. Slim, trim size is perfect for
Engineer’s Powerlock® Tape Rule - For decimal measuring in
carrying in pocket or purse. Yellow blade is
graduated in 16ths for entire length, in
32nds for first 6".
automotive, aircraft, electronic, paperboard, and box manufacturing
industries. Fractional graduations on
upper edge and decimal graduations on
lower edge. First 6" of blade graduated
in 32nds on upper edge and 50ths of
inch on lower edge. Balance of blade
graduated in 16ths on upper edge and
10ths of inch on lower edge.
Push-button lock with power return.
Chrome-plated case. 1/2" x 12’.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
365521-C
33-272
1/2"x12 Chr Tape Rule
1/6/36
.480
Unit
Cost
15.99 EA
RULES/TAPE MEA SURES
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344311-C
30-061
1/4"x10 Yel Tape Rule
1/6/72
.121
Unit
Cost
FatMax® Tape Rule - 11’ of blade stand out. Ergonomic case. 1-1/4"
wide blade for more durability and first 6" has
Blade Armor for increase durability.
Cushion-grip is built into case for
Powerlock® Tape Rule - 7’ of blade standout. Push-button lock with nonslip grip. Multi-functional hook grabs
power return. Life Guard yellow blade is protected with
on side, top, or bottom. Heavy-duty
Mylar® for long blade life. Powerlock®
Mylar®, coating extends blade life.
secures blade position. Belt clip on
back of chrome case. Packed on blister
card.
4.29 EA
RULES/ TA PEMEASURES
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
322724-C
395552-C
322742-B
322760-B
303665-B
352460-C
324919-A
300935-A
344915-B
344907-C
33-202
33-231
33-212
33-312
33-116
33-320
33-425
33-430
33-835
33-428
1/2" x 6’/2m English metric
1/2" x 10’/3m English metric
1/2" x 12’
3/4" x 12’
3/4" x 16’
3/4" x 20’
1" x 25’
1" x 30’
1" x 35’
1" x 25’/7.5m English metric
1/6/36
1/6/36
1/6/36
1/6/36
1/4/24
1/6/36
1/4/24
1/4/24
1/4/24
1/4/24
.375
.250
.447
.639
.861
.667
1.125
1.125
1.579
.979
Unit
Cost
10.49 EA
12.49 EA
11.79 EA
14.99 EA
12.99 EA
17.99 EA
10.99 EA
12.99 EA
17.99 EA
19.79 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
357324-B
344346-B
395579-B
360074-B
33-716
33-725
33-730
33-735
1-1/4" x 16’
1-1/4" x 25’
1-1/4" x 30’
1-1/4" x 35’
1/4/24
1/4/24
1/4/24
1/4/24
.805
1.367
1.000
1.679
Unit
Cost
21.99 EA
24.99 EA
28.99 EA
34.99 EA
RULES/TAPE MEA SURES
Heavy-Duty PowerLock® II Tape Rule - Heavy-duty spring
blade, and hook system. Thick steel blade, 8’ standout. Heavy-duty
Mylar®blanket-wrap coating extends
blade life. 3 rivet hook. Impact-resistant
safety yellow case. Carded.
RULES/ TA PEMEASURES
Powerlock® - 1" blade, graduated in 1/16" increments. Reinforced with
Blade Armor™ coating on the first 6"
for 2 times the blade life. 16" and 19.2"
stud center markings on blade for
framing purposes. Blade is protected
with Mylar® for long blade life.
Chrome-plated case, epoxy-coated belt
clip and wearplate protect case from
being cut by blade.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321540-B
324090-B
33-525
33-530
1" x 25’
1" x 30’
1/4/24
1/0/12
.979
1.192
Service is our priority!
Our commitment is to meet your needs!
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
391158-B
344338-B
395560-B
33-625
33-630
33-635
1" x 25’
1" x 30’
1" x 35’
1/4/24
1/4/24
1/4/24
1.125
1.292
1.375
Unit
Cost
14.99 EA
17.99 EA
21.49 EA
Unit
Cost
13.99 EA
15.99 EA
10-33
HAND TOOLS
HAND TOOLS
RULES/TAPE MEASURES
RULES/ TA PEMEASURES
HAND TOOLS
RULES/TAPE MEASURES
RULES/TAP EME ASURES
MEASURI NG
CST/Berger
MaxSteel™ Extra Heavy-Duty Tape Rule - 9’ of blade
standout. Extra heavy-duty tape rule. Maximum steel blade for longer
standout. Exclusive cushioned grip built
into the case for comfortable nonslip
grip. Top forward blade lock design
makes it easy to lock and unlock. Blade
Armor™ coating applied to the first 6"
for maximum durability and reduced
blade breakage. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
374660-B
386391-B
33-799
33-800
1" x 25’
1" x 30’
1/4/24
1/4/24
1.311
1.579
Measuring Wheel - Push-button reset counter records feet and
inches up to 10,000’. Dual 4" ABS plastic measuring
wheels. Wheel circumference is 12". Diameter is 4". 20-1/
2" handle extends and locks at 36".
Unit
Cost
16.99 EA
21.99 EA
RULES/TAP EME ASURES
Product
No.
Mfg.
No.
Description
323667-C
77-193
4" Dual Measuring Wheel
Steel Tape - Compact, contour shaped to fit hand. Rugged, molded
case won’t rust. Easy-to-read yellow blade
graduated in 8ths with 16" stud
markings and foot markings in red.
Case opens for easy cleaning or to
replace blade cartridge. Individually
carded. 3/8" wide blade.
Order
Mult.
Weight
1/0/4
1.100
Unit
Cost
39.99 EA
MEASURI NG
CST/Berger
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
346245-B
346236-B
34-103
34-106
3/8" x 50’
3/8" x 100’
1/6/24
1/6/24
.181
.311
Unit
Cost
Measuring Wheel - Designed to handle a variety of measuring jobs
indoor and out. Durable neoprene tire for good
traction over most surfaces. Push-button reset counter
records feet and inches up to 10,000’. Counter
subtracts as well as adds. Wheel circumference is 36".
Diameter is 12-1/2". Folding heavy-duty handle with
curved gripping area extends and locks at 39".
Heavy-duty die-cast aluminum wheels and kickstand.
11.99 EA
17.99 EA
MEASUR ING
FatMax® Steel Tape Rule - Heavy-duty, strong stainless steel
blade for longer life. 3:1 gear drive for faster rewind. Dual
material cushion-grip case for
comfortable nonslip grip. Stainless steel
roller cage for smooth blade action.
Strong, corrosion-resistant, 2-position
hook.
Mfg.
No.
Description
323659-C
77-194
12-1/2" Measuring Wheel
Order
Mult.
Weight
1/0/2
5.000
Unit
Cost
74.99 EA
MEASURI NG
Starrett, L. S.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
396281-B
357340-B
34-129
34-130
50’
100’
1/6/24
1/6/24
.625
.983
10-34
Product
No.
Unit
Cost
17.99 EA
22.99 EA
DIGITAPE™ Electronic Tape Rule - Rugged, accurate, reliable
tape rule helps eliminate tape mis-reads by digitally displaying
measurement on LCD readout while also
functioning as a conventional tape rule.
Simple push-button control displays
inches, feet, and metric, automatically
adds the 3-1/2" case to inside
measurements, freezes measurements
in memory, and resets to a zero reading
at any blade position. 3/4" x 16’ yellow
blade. Uses Duracell model No. DL1/3 or
DL1/3B batteries.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
371289-A
D34-16
16 Electronic Tape Rule
1/6/12
.717
Unit
Cost
24.99 EA
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
MEASURING
MEASUR ING
Strait-Line Sonic Laser Tape - The new Strait-Line sonic laser
tape uses sonic wave technology to measure distances up to 50’ with
the touch of a button. The laser targeting clearly and
accurately indicates the point of measurement. The
sonic laser tape calculates both the area and volume
of a room. The memory positions stores up to 5
important measurements.
Product
No.
Mfg.
No.
Description
324214-B
6041401CD
Sonic Laser Rule
Order
Mult.
Weight
1/0/5
.500
Unit
Cost
Electronic Sonic Measure - DM S50L utilizes ultrasonic
technology to measure up to 50’ and with laser pattern to illuminate
target area to aid accuracy. Measurement
function includes length, area, volume,
double segment, and continuous
measurement. Converts between feet/
inches and metric system. Double segment
feature measures lengths up to 100’.
Measures in feet and inches, also
measures in meters and centimeters.
Accurate to +/- 0.5%. Easy-to-read LCD
screen. Great for estimating paint,
wallpaper, tile carpet, and flooring. Uses (1)
9V battery (not included).
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
327611-B
58430
Electronic Sonic Measure
1/0/12
.667
Unit
Cost
37.99 EA
39.99 EA
MEASUR ING
Calculated Ind.
MEASU RING
CST/Berger
Master® Measure Pro - Great for designers, woodworkers,
Fat-Max™ Laser Meaurer - Tru Laser technology, actually
craftsmen, technicians, ect. Calculates directly in feet, inches,
fractions, yards, meters, centimeters, millimeters,
including square or cubic formats of each. Converts
to and from all dimensional formats instantly. Instant
solutions for circumference, circle area and arc
lengths. 1 button solves postholes, columns, pillars,
arches and much more. Weight-per-volume key
allows you to find weight of material (i.e., tons per
cubic yard, kilograms to pounds, ect.). Custom set
fractions. Estimate material costs. Paperless tape
allows you to review last 20 entries. Includes battery
(model No. CR-2032). Carded.
measuring the laser light travel distance up to 50’. Larger LCD
graphical display along with single Point and Push
On/Measurement. Ergonomic rubberized grip for
comfort and impact resistance.
Product
No.
Mfg.
No.
Description
336318-A
77-910
Fat-max Laser Measurer
Order
Mult.
Weight
1/0/6
1.000
Unit
Cost
99.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
382116-C
4020
Meas Mstr Pro Calculator
1/3/24
.510
Unit
Cost
34.99 EA
MEASUR ING
Calculated Ind.
MEASU RING
Electronic Sonic Measure - DM S40 utilizes ultrasonic technology
to measure up to 40’ with a click of a button. Converts
between feet/inches and metric system.
Continuous measurement capability.
Measures in feet and inches, also measures in
meters and centimeters. Accurate to +/- 0.5%.
Easy-to-read LCD screen. Great for
estimating paint, wallpaper, tile, carpet, and
flooring. Uses (1) 9V battery (not included).
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302368-B
58428
Electronic Sonic Measure
1/0/12
.573
Unit
Cost
Construction Master® Pro - Essential tool for serious building
pros, contractors, and architects. Calculates directly in feet,
inches, fractions, yards, meters, centimeters,
millimeters - including square or cubic formats of
each. Converts to and from any dimensional
formats instantly. Custom rafter keys give you
common rafters, regular and irregular hips, valleys,
and jacks. Enhanced Stair key finds number of
risers and treads, riser height and tread width,
stringer length, incline angle. New Pro features
include; block and footing keys, rafter cutting
angles, roof areas, column/cone solutions,
backspace key and D.M.S. to decimal degree
conversions. Also includes board feet estimating,
weight-per-volume conversions, 3 memories,
paperless tape remembers last 20 entries and
more. Includes 2 batteries (model No. LR44). Boxed.
Product
22.99 EA No.
382086-C
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
Mfg.
No.
Description
Order
Mult.
Weight
4065
Construction Calculator
1/0/24
.510
Unit
Cost
77.99 EA
10-35
HAND TOOLS
MEASU RING
HAND TOOLS
MEASURING
MEASUR ING
MEASURI NG
Construction Master® Pro - Desktop version. Computes feet,
FatMax® Xtreme™ Chalk and Reel Combo - It has a 5:1
inch, and fraction with trigonomeric functions. Essential tool for
serious building professionals, contractors, and
architects. Used for projecting, ranging from
design and engineering to estimating and
bidding. Adds, subtracts, multiplies, and divides
in feet and inch fractions, decimal feet, decimal
inches, yards, meters, centimeters, millimeters,
board feet, square, and cubic dimensions.
Converts to and from any dimensional format. 4
built-in memories stores constants or
accumulates values in any dimensional format.
Authentic solutions for rafters and right angles,
hips, valleys, wall studs, concrete square ups,
and slopes. Stairway key finds risers, treads,
riser height, and tread width. Circles, arcs, and
inclines, in addition to many more specific functions. Paperless tape
remembers last 20 entries. Boxed.
gear ratio to rewind 5 times faster, a quick release so the crank will not
spin when pulling out the line, and the handle
locks into case to hold string in place. The box
holds over 1.5 oz. of chalk. Crank handle clutch
release allows release of the line without spinning
the crank handle. Twisted cotton line holds more
chalk for multiple line strikes. 3 times line
abrasion resistance.
Calculated Ind.
Product
No.
Mfg.
No.
391603-B
44080
Description
Order
Mult.
Weight
Dt Constructn Calculator
1/6/12
1.542
Order
Mult.
Weight
382094-C
6020
Scalemaster Classic
1/0/24
.417
Order
Mult.
Weight
338012-B
47-482L
Blue chalk
1/0/6
.950
Unit
Cost
13.99 EA
Starrett, L. S.
Chalkline Reel - 100’ Reel-Fast™ chalkline reel with chrome case
made of high-impact plastic. The locking handle
also allows the tool to be used as a plumb bob.
Scalemaster Classic - 72 built in scales, 39 imperial (feet and inch),
and 33 metric for maximum versatility in
architectual, engineering, and civil
scaling. 6 custom scales. 2 built in
memories solve area and volume. Store
and recall length, width, and height
values. Accumulate linear, area, and
cubic values. Provides most needed dimensional units. Subtract key
allows you to subtract rolled distances. Boxed.
Description
Description
89.99 EA
Calculated Ind.
Mfg.
No.
Mfg.
No.
Unit
Cost
MEASUR ING
Product
No.
Product
No.
MEASURI NG
Unit
Cost
69.99 EA
MEASUR ING
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
311647-C
SACL100
100 Chalkline Reel
1/6/36
.500
Chalkline Reel - Durable die-cast aluminum body. Felt gasket hugs
Unit
Cost
7.99 EA
MEASURI NG
line and distributes uniform chalk coating. Can be
used as a plumb bob. Carded. 100’.
Chalkline Reel - Self-chalking aluminum alloy box features
self-locking handle and can double as a plumb bob. Extra
strong 50’ or 100’ chalkline delivers straight and
true snapping action for a clear line.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
311095-C
47-099
100 Chalkline Reel
1/2/24
.500
10-36
Unit
Cost
9.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
311102-D
311111-C
63950
64110
50’
100’
1/6/144
1/6/144
.500
.531
Unit
Cost
5.79 EA
5.99 EA
Save time by letting us locate those
hard-to-find items for you!
CHALKLI NES/ RE LS
Chalkline Reel - Strait-Line® 100’ Speed-Line® self-chalking reel with
fast retrieve. ABS impact-resistant casing is
more durable than chrome casing. Handle clutch
release allows line release without spinning
crank. Hook snaps into door slide to prevent
spills when not in use. Smaller design for comfort
and easier handling. Carded.
Large Capacity Chalkline Reel - Strait-Line® 180’ self-chalking
reel with fast retrieve. Soft grip handle and folding handle
with lock. Large steel pull ring, braided cotton/
polycord line, and large easy-fill door with 10 oz.
capacity. Shock-resistant case.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
306177-C
64310
100 Chalkline Reel
1/6/144
.417
Unit
Cost
Product
8.99 EA No.
393150-B
CHALK LINES /RE LS
Mfg.
No.
Description
Order
Mult.
Weight
64320
180 Chalkline Reel
1/2/12
1.953
Unit
Cost
39.99 EA
CHALKLI NES/ RE LS
6x Chalkline Reel - 6x faster helical gear system (6:1 ratio). 2x
stronger twisted polyester and nylon line resists
fraying and breaking plus absorbs chalk
quickly for darker, sharper lines. Die-cast
metal plates make the model No. SL6X 50%
more durable if dropped from 2 stories.
Wide-pronged hook grips surface for stable
anchoring and allows line to be snapped at
various angles. Longer metal handle for faster
rewind and greater torque. Crank handle
clutch releases line without handle spinning.
High-impact rubber grip prevents reel from
slipping and protects the reel when dropped.
Product
No.
Mfg.
No.
Description
320049-C
2031303
6x Chalkline Reel
Order
Mult.
Weight
1/0/6
1.000
Powdered Chalk - Strait-line® chalk for reel type chalkline boxes.
Packaged in plastic squeeze bottles with fast fill spout.
For use on a variety of surfaces including wood, drywall,
concrete, stone, and metal permanent colors, especially
black and red, produce long-lasting lines that won’t fade.
Unit
Cost
Product
No.
Mfg.
No.
10.99 EA
350925-D
350934-D
350943-E
350952-E
332860-E
329924-D
350656-D
349581-D
349732-D
354074-C
64801
64802
64901
64902
64904
64905
64908
65102
65101
65105
311237-D
10396
CHALK LINES /RE LS
Order
Mult.
Weight
4 oz. blue refill
4 oz. red refill
8 oz. blue refill
8 oz. red refill
8 oz. white refill
8 oz. fluorescent orange refill
8 oz. black refill
Gallon/5 lb. red refill
Gallon/5 lb. blue refill
Gallon/5 lb. fluorescent
orange refill
1/6/24
1/6/24
1/6/24
1/6/24
1/6/24
1/6/24
1/6/24
1/0/4
1/0/4
1/0/4
.346
.344
.594
.594
.596
.596
.635
5.500
5.500
5.500
1.29 EA
1.29 EA
1.79 EA
1.79 EA
1.79 EA
2.49 EA
2.99 EA
8.99 EA
8.99 EA
13.99 EA
Blue Cake Chalk
1/0/8
4.875
17.49 BX
Description
Unit
Cost
6x Chalkline Reel And Chalk Set - 6x faster helical gear system
(6:1 ratio). 2x stronger twisted polyester and nylon line resists
fraying and breaking plus absorbs chalk
quickly for darker, sharper lines.
Die-cast metal plates make the model
No. SL6X 50% more durable if dropped
C. H. Hanson
from 2 stories. Wide-pronged hook
grips surface for stable anchoring and
Cake Carpenter Chalk - Hemispherical cakes. 2-1/2" diameter 1-1/
allows line to be snapped at various
2" high. Packaged 1/2 gross in a box. 72 each. Blue.
angles. Longer metal handle for faster
rewind and greater torque. Crank
handle clutch releases line without
handle spinning. High-impact rubber
grip prevents reel from slipping and
protects the reel when dropped. Set
Product
Mfg.
Order
Unit
includes 4 oz. blue chalk.
No.
No.
Description
Mult.
Weight
Cost
CHALKLI NES/ RE LS
Product
No.
Mfg.
No.
Description
320058-C
2031304P
6x Chalkline Reel Combo
We can become your single-source supplier
on many of the products you currently use!
Order
Mult.
Weight
1/0/8
9.625
Unit
Cost
12.99 EA
10-37
HAND TOOLS
HAND TOOLS
CHALKLINES/REELS
Chalki nes/Re ls
HAND TOOLS
CHALK LINES/REELS
CHALK LINES/ RE LS
CHALKLI NES/ RE LS
Wellington Con. Cordage
Stringliner
Do it™ Nylon Chalk And Mason Line - 100% nylon in rough
Nylon Mason Line With Reel - For contractors, carpenters,
masons, or home use. Free spinning handle for quick and easy
unwinding/rewinding. Reloadable reel. No. 18 nylon
construction line.
braided chalkline construction. Resistant to rot, abrasion, and is not
damaged by cement or alkalies. Do it™
labeled and shrink film wrapped. Tubes
are 1/16" in diameter and have an
approximate 70 lb. breaking strength.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
307055-D
307091-D
307055/80003
307091/80004
100’ tube
500’ tube
1/0/48
1/6/72
.094
.417
Unit
Cost
2.49 EA
8.49 EA
CHALK LINES/ RE LS
Wellington Con. Cordage
Product
No.
Mfg.
No.
345156-D
360309-D
25000
25006
345121-D
345113-D
25100
25106
360600-D
25406
345164-D
331465-D
25150
25159
360821-D
25162
331546-D
360910-D
25450
25462
Do it™ Opti-Brite™ Nylon Mason Line - Formulated with a
high-visibility coating that also resists abrasion. Easily seen in bright
sunlight or dim areas. No. 18 thread
size. 170 lb. breaking strength. 525’
long. Twisted construction.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
360643-D
338621-D
338613-D
360643/80067
338621/80072
338613/80071
Fluorescent pink
Fluorescent orange
Fluorescent yellow
6/0/96
6/0/96
6/0/96
.521
.521
.521
Unit
Cost
5.79 EA
5.79 EA
5.79 EA
Description
Twisted gold, 135’
Twisted fluorescent orange,
135’
Twisted gold, 270’
Twisted fluorescent orange,
270’
Twisted fluorescent orange,
540’
Braided yellow, 250’
Braided fluorescent orange,
250’
Braided fluorescent pink,
250’
Braided yellow, 500’
Braided fluorescent pink,
500’
Order
Mult.
Weight
Unit
Cost
1/0/48
1/0/48
.333
.333
3.99 EA
3.99 EA
1/0/48
1/0/48
.458
.458
6.99 EA
6.99 EA
1/0/48
.708
10.49 EA
1/0/48
1/0/48
.458
.458
7.99 EA
7.99 EA
1/0/48
.458
7.99 EA
1/0/48
1/0/48
.708
.708
12.79 EA
12.79 EA
CHALKLI NES/ RE LS
CHALK LINES/ RE LS
Plumb Bob - Made of steel, with precisely turned points and
self-centering, cavity type cap for holding cord. Chrome-plated
for rust resistance. Carded.
Replacement Line - Twisted construction.
Product
No.
Mfg.
No.
Description
311219-E
311228-E
64550
64610
50’
100’
10-38
Order
Mult.
Weight
0/0/6
0/0/6
.042
.042
Unit
Cost
1.79 EA
2.29 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344960-D
344979-D
344988-D
5PB
8PB
12PB
5 oz.
8 oz.
12 oz.
1/6/72
1/6/72
1/6/72
.560
.700
.880
Unit
Cost
4.49 EA
5.29 EA
5.99 EA
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
MARKING
Marikng
MARKI NG
C. H. Hanson
transit location, and construction applications. Screw
top to easily attach string to center of plumb. Pollished
lacquered solid brass construction resists rust. Long
slender profile for easy storage. Replaceable,
hardened, steel tip for longer life. Additional tip
included on 8 oz. and 16 oz. sizes. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
356468-C
357618-C
357693-C
47-969
47-973
47-974
4 oz.
8 oz.
16 oz.
1/6/36
1/6/36
1/0/6
.456
.706
1.148
Unit
Cost
6.99 EA
8.49 EA
12.49 EA
Carpenters Pencil Sharpener - Professional sharpening tool
designed specifically for carpenters pencils. Gives a clean, sharp
point. Safer and easier to use than a utility knife. Compact
and durable design. Packed 50 per display merchandiser.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
391409-B
00102
Carpntr Pencil Sharpener
0/0/50
.048
Unit
Cost
3.49 EA
MARKI NG
C. H. Hanson
China Marker - The opaque pigment marks all glazed and slick
MARK NI G
C. H. Hanson
surfaces, providing permanent marking on porous
surfaces; semi-permanent (removable
with damp cloth) on nonporous surfaces.
Self-sharpening string pull. Works on
surface temperatures to 175°. Grit-free,
nonconductive, nontoxic leads.
Lumber Crayon Holder - Polished wood handle with metal
tightening adjustment. Provides surer grip on all round or
hexagonal crayons 1/2" in diameter. Hole
for wrist thong.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
310646-D
10387
Lumber Crayon Holder
1/0/12
.083
Unit
Cost
Product
No.
Mfg.
No.
Description
303932-D
303816-D
302363-D
10390
10391
10392
Red
Black
White
12.49 EA
MARK NI G
C. H. Hanson
Order
Mult.
Weight
12/0/144
12/0/144
12/0/144
.022
.022
.022
Unit
Cost
.79 EA
.79 EA
.79 EA
MARKI NG
Lumber Crayon - 4-1/2" L. x 1/2" D. Extruded under tremendous
C. H. Hanson
pressure, strong and long-wearing. Used on lumber,
steel, concrete, and most rough
surfaces. Water-resistant,
fade-resistant, and smear-resistant.
Soapstone - Processed soapstone, a pressed talc crayon used for
fabric marking and welding. Marks will not
contaminate weld. 5" x 1/2" x 3/16". 144 pieces
per box.
Product
No.
Mfg.
No.
Description
310899-D
310906-D
310871-D
310880-D
10382
10383
10384
10385
Red
Blue
Black
Yellow
Order
Mult.
Weight
12/0/144
12/0/144
12/0/144
12/0/144
.076
.076
.076
.076
Unit
Cost
.99 EA
.99 EA
.99 EA
.99 EA
Product
No.
Mfg.
No.
309249-D
344966-D
10375
10371
Description
Soapstone
Soaptone Holder, aluminum
holder fits 5" x 1/2" x 3/16"
soapstones
Order
Mult.
Weight
1/0/3
1/0/12
7.500
.063
Unit
Cost
34.99 BX
2.99 EA
MARK NI G
C. H. Hanson
MARKI NG
Lumber Crayon - Mark It brand lumber crayons are a full 4-1/2" x 1/2"
crayon designed for a variety of uses.
Available in 4 colors.
Product
No.
Mfg.
No.
Description
344974-D
344982-D
344990-D
345008-D
10365
10366
10367
10368
Red
Blue
Black
Yellow
Order
Mult.
Weight
12/0/144
12/0/144
12/0/144
12/0/144
.076
.068
.076
.076
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
Unit
Cost
.69 EA
.69 EA
.69 EA
.69 EA
C. H. Hanson
Railroad Chalk - White. Overall size is 4" x 1". 144 pieces per box.
Product
No.
Mfg.
No.
Description
344958-D
10374
White Railroad Chalk
Order
Mult.
Weight
Unit
Cost
1/0/4
10.750
31.99 BX
10-39
HAND TOOLS
Brass Plumb Bob - For use in framing, deck building, plumbing,
HAND TOOLS
MARKING
MARKI NG
MARKI NG
C. H. Hanson
Stringliner
Caution Tape - Yellow with black print. Durable, nonadhesive,
TapeWiz™ Tape Holder - Tape holder for up to 1000’ plastic tapes.
Includes 1000’ 2 mil. yellow caution tape.
nonconductive plastic tape. Tape is reusable and
sunfast. High-visibility.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302805-D
343919-D
14001
14995
3" x 300’, 2 mil. thick
3" x 1000’, 3 mil. thick
1/10/60
1/0/12
1.042
5.000
Unit
Cost
6.99 RL
13.99 EA
MARKI NG
C. H. Hanson
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
323160-E
42020
Lg Tapewiz Tape Holder
1/0/12
3.167
Unit
Cost
21.49 EA
MARKI NG
C. H. Hanson
Flagging Tape - Highly visible tape is extruded plastic sheet with
colorfast identification. Weatherproof for
outdoor use. 1-3/16" wide. Bulk.
Danger Tape - Red with black print. Durable, nonadhesive,
nonconductive plastic tape. Tape is reusable and sunfast. High-visibility, 2 mil. thick. 3" x
300’.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
308536-D
14003
300 Danger Tape
1/0/10
.938
Unit
Cost
6.99 EA Product
No.
Mfg.
No.
Description
17000
17001
17002
17003
17020
17021
17022
17023
17024
Glo-orange, 150’
Glo-lime, 150’
Glo-red, 150’
Glo-pink, 150’
White, 300’
Red, 300’
Orange, 300’
Blue, 300’
Yellow, 300’
Order
Mult.
Weight
1/12/144
1/12/144
1/12/144
1/12/144
1/12/144
1/12/144
1/12/144
1/12/144
1/12/144
.319
.319
.319
.028
.333
.325
.028
.389
.389
Unit
Cost
MARKI NG
C. H. Hanson
308412-E
308404-E
308420-E
343889-E
308374-E
343897-E
343900-E
308382-E
308390-E
Wet Paint Tape - Yellow with black print. Durable, nonadhesive,
nonconductive plastic. Tape is reusable and sunfast.
High-visibility.
1.99 EA
1.99 EA
1.99 EA
1.99 EA
1.99 EA
1.99 EA
1.99 EA
1.99 EA
1.99 EA
MARKI NG
C. H. Hanson
Yellow and Black Floor Tape - Yellow and black striped tape ideal
for marking aisles. 2" x 54’ roll.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
356476-D
343935-D
14986
15011
3" x 50’, 4 mil. thick
3" x 200’, 3 mil. thick
1/0/32
1/10/60
.442
.125
Unit
Cost
2.79 EA
7.99 EA
MARKI NG
Stringliner
TapeWiz™ Tape Holder - Tape holder for up to 300’ plastic tapes.
Includes 300’ 2 mil. yellow caution tape.
Product
No.
Mfg.
No.
323152-E
42010
10-40
Description
Order
Mult.
Weight
Sm Tapewiz Tape Holder
1/0/18
.944
Product
No.
Mfg.
No.
Description
360104-D
15045
Yellow/black Floor Tape
Order
Mult.
Weight
1/0/6
.428
Unit
Cost
10.99 RL
Unit
Cost
7.49 EA
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
MARKING
MARK NI G
MARKI NG
C. H. Hanson
C. H. Hanson
Marking Flags - Highly visible extruded plastic flag. Weatherproof for Letter Stencil Set - Made of solid brass. Reusable interlocking and
interchangeable. Includes 1 each A thru Z, spacer,
beginner, period ender, period, comma, and
dash.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
356425-D
356433-D
356441-D
352802-D
352799-D
352780-D
352772-D
15065
15066
15067
15070
15071
15075
15076
Glo-red, 10 per pack
Glo-pink, 10 per pack
Glo-lime, 10 per pack
Glo-red, 100 per pack
Glo-pink, 100 per pack
Yellow, 100 per pack
Blue, 100 per pack
1/0/12
1/0/12
1/0/12
1/0/10
1/0/10
1/0/10
1/0/10
.163
.163
.163
1.719
1.719
1.719
1.719
Unit
Cost
Product
2.99 PK No.
2.99 PK 343951-C
2.99 PK 343978-C
10.49 PK 343986-C
10.49 PK
10.49 PK
10.49 PK
Mfg.
No.
Description
10323
10325
10327
1"
2"
3"
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
.458
.708
.958
Unit
Cost
14.99 SET
22.99 SET
35.99 SET
MARKI NG
C. H. Hanson
Letter Stamp Set - 1/8" steel stamps for marking wood, metal,
leather, and plastics. Identify tools, keys, household
bicycles, and many other items
Plastic Stencil Set - Reusable, interlocking and interchangeable. For goods,
permanently. High alloy steel,
use with paint, markers, and pencils. Includes 1
heat-treated. Contains 1 each A thru Z
each A thru Z plus extra A, E, R, and S,
plus an ampersand (&).
numerals 0-9, dollar sign, ampersand
(&), period, dash, and 2 spacers.
MARK NI G
C. H. Hanson
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355569-D
355550-D
10192
10193
2"
3"
1/0/12
1/0/12
.232
.417
Unit
Cost
6.49 SET
8.99 SET
MARK NI G
C. H. Hanson
Numeral Stencil Set - Made of solid brass. Reusable, interlocking
and interchangeable. Includes 1 each 1 thru 9 and 2
each 0, beginner, plain ender, period and dash.
Product
No.
Mfg.
No.
Description
304520-C
20200
1/8" Letter Set
Order
Mult.
Weight
1/0/4
1.560
Unit
Cost
32.49 SET
MARKI NG
C. H. Hanson
Numeral Stamp Set - 1/8" steel stamps for marking wood, metal,
leather, and plastics. Identify tools, keys, household
goods, bicycles, and many other items
permanently. High alloy steel,
heat-treated. Contains 1 each 0 thru 8
with 6 also used as 9.
Product
No.
Mfg.
No.
Description
343994-D
344001-D
344028-D
10303
10305
10307
1"
2"
3"
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
.250
.375
.583
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
Unit
Cost
7.49 SET
11.99 SET
18.99 SET
Product
No.
Mfg.
No.
Description
304557-D
20683
1/8" Number Set
Order
Mult.
Weight
1/0/6
.500
Unit
Cost
11.49 SET
10-41
HAND TOOLS
outdoor use. 2-1/2" H. x 3" W. Staff is 15".
HAND TOOLS
LEVELS/SQUARES
LEVELS/ Q UARES
LEVE SL /SQU ARES
Replacement End Cap - Replacement end caps fit the Stabilia No. Aluminum Box Frame Level Jamber Set - No. 196. Ideal for
87 and 187 model series. Features patented wall grips, red
framing, trim carpentry, and tile applications. Unique BOX BEAM frame
pads, for extra stability with 1-hand usage. 2 each per pack.
does not bend or warp. 1 horizontal vial
and 2 vertical vials. Crystal clear vials
readable in any direction with no
change in accuracy tolerance,
guaranteed for life, vial accuracy of .029
in the vial-up or vial-down position. Best
frame strength-to-weight ratio. Removable endcaps for scribing in corners
and for reading tight header and sill openings. Rubber endcaps grip walls
Product
Mfg.
Order
Unit
No.
No.
Description
Mult.
Weight
Cost
and do not leave marks. Metal hang hole for storing level on site. Large
395250-D
20030
Replacement End Cap
1/0/10
.085
2.99 PK comfortable rubber hand holes. Fast and accurate installations. Each
Stabila level is electronically adjusted. Machine milled faces assure
measuring accuracy. Unbreakable acrylic vials won’t break, leak, or fog for
Top and side reading in both vial-up and vial-down positions for best
10" Torpedo Box Level (No. 70-T) - Aluminum BOX BEAM level life.
accuracy. Sure-grip antislip wall pads. Slip-resistant. Yellow electrostatic
construction will not warp or twist. Accuracy of .057 in vial-up position.
epoxy coating for high-visibility and resistance to mortar adherence and
2 crystal clear, nonfogging,
corrosion. Patented epoxy system, locks vials into the frame for no loss of
unbreakable, acrylic vials. Removable
accuracy and never readjusting. 78" and 32" set.
high end caps for flush measuring and
Product
Mfg.
Order
Unit
convenient storage. Unique design that
No.
No.
Description
Mult.
Weight
Cost
inserts fits in tool pouches or pockets.
374474-B
37532
Alum Level Jamber Set
1/0/6
5.700
189.99 EA
Each Stabila level is electronically
adjusted. Machine milled faces assure
measuring accuracy. Unbreakable, acrylic vials won’t break, leak, or fog
for life. Top and side reading in both vial-up and vial-down positions for
Plate Level (187P) - Level is used for 9’ and 10’ ceiling construction.
best accuracy. Sure-grip anti-slip wall pads. Slip-resistant. Yellow
Box frame construction will not warp or twist.
electrostatic epoxy coating for high-visibility and resistance to mortar
Extends from 6’ to 10’ fully sealed, solid
adherence and corrosion. Patented epoxy system, locks vials into the
rail (6-sided) extension eliminates
frame for no loss of accuracy and never readjusting. 10" with 1 protractor deflection and extension crash and
vial and 1 horizontal vial, magnetic.
delivers smooth extension movement.
Plumb vial is located at 66-1/2".
Product
Mfg.
Order
Unit
No.
No.
Description
Mult.
Weight
Cost
High-visibility scale on both sides of the extension rail. Frame side
395277-B
21999
10" Alum Torpedo Level
1/0/10
.640
23.49 EA opposite the stand offs is a level measuring surface and straight edge.
LEVELS/ Q UARES
LEVE SL /SQU ARES
LEVELS/ Q UARES
Aluminum Box Frame Level - No. 196. Ideal for framing, trim
carpentry, and tile applications. Unique BOX BEAM frame does not
bend or warp. 1 horizontal vial and 2
vertical vials. Crystal clear vials
readable in any direction with no
change in accuracy tolerance,
guaranteed for life, vial accuracy of .029
in the vial-up or vial-down position. Best
frame strength-to-weight ratio. Removable endcaps for scribing in corners
and for reading tight header and sill openings. Rubber endcaps grip walls
and do not leave marks. Metal hang hole for storing level on site. Large
comfortable rubber hand holes. Fast and accurate installations. Each
Stabila level is electronically adjusted. Machine milled faces assure
measuring accuracy. Unbreakable acrylic vials won’t break, leak, or fog for
life. Top and side reading in both vial-up and vial-down positions for best
accuracy. Sure-grip antislip wall pads. Slip-resistant. Yellow electrostatic
epoxy coating for high-visibility and resistance to mortar adherence and
corrosion. Patented epoxy system, locks vials into the frame for no loss of
accuracy and never readjusting.
Product
No.
Mfg.
No.
Description
373990-B
374016-B
374024-B
374466-B
37424
37432
37448
37496
24"
32"
48"
96"
10-42
Order
Mult.
Weight
1/0/4
1/0/4
1/0/4
1/0/4
1.400
1.500
2.570
5.300
Unit
Cost
Product
No.
Mfg.
No.
Description
321818-B
33610
6-10 Plate Level
Order
Mult.
Weight
1/0/3
10.333
Unit
Cost
229.99 EA
LEVE SL /SQU ARES
10" Die-Cast Torpedo Level (No. 81SM) - Die-cast aluminum
frame. Ideal for electrical, pipe fitting, mechanical, millwork, drywall, and
other applications. 4 flush mounted
magnets for greater convenience. Vial
accuracy of .029 in vial-up position. 1
vertical and 1 horizontal crystal clear,
nonfogging unbreakable, monoblock,
acrylic vials. Each Stabila level is
electronically adjusted. Machine milled faces assure measuring accuracy.
Unbreakable, acrylic vials won’t break, leak, or fog for life. Top and side
reading in both vial-up and vial-down positions for best accuracy. Sure-grip
anti-slip wall pads. Slip-resistant. Yellow electrostatic epoxy coating for
high-visibility and resistance to mortar adherence and corrosion. Patented
epoxy system, locks vials into the frame for no loss of accuracy and never
readjusting.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
395323-B
25100
10" Alum Torpedo Level
1/0/10
.256
Unit
Cost
31.99 EA
67.99 EA
74.99 EA
89.99 EA
189.99 EA
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
LEVELS/SQUARES
LEVELS/ QUARES
LE VELS/ Q UARES
Magnetic Aluminum Box Frame Level - No. 96M. Ideal for
Magnetic Aluminum Level - I-beam construction with full
magnetic, V-groove base. Equipped with virtually unbreakable
uni-vials and features I-piece top
view window.
framing, trim carpentry, and tile applications. Unique Box Beam frame
does not bend or warp. 1 horizontal vial and 2
vertical vials. Crystal clear vials readable in any
direction with no change in accuracy tolerance,
Product
Mfg.
Order
Unit
No.
No.
Description
Mult.
Weight
Cost
guaranteed for life, vial accuracy of .029 in the
vial-up or vial-down position. Best frame
328561-D
10735
24" long, 1 plumb vial, 2
1/0/6
1.667
26.49 EA
level vials
strength-to-weight ratio. Removable endcaps for scribing in corners and
10738
48" long, 1 plumb vial, 2
1/0/6
3.333
36.49 EA
for reading tight header and sill openings. Rubber endcaps grip walls and 373559-C
level vials
do not leave marks. Metal hang hole for storing level on site. Fast and
373567-C
10739
72" long, 2 plumb vials, 1
0/0/1
10.000
47.99 EA
accurate installations. Each Stabila level is electronically adjusted.
level vial
Machine milled faces assure measuring accuracy. Unbreakable acrylic
vials won’t break, leak, or fog for life. Top and side reading in both vial-up
Brass Bound Wood Level - Laminated birch. Angle-seal process
and vial-down positions for best accuracy. Sure-grip antislip wall pads.
of double locking the brass binding to the wood.
Slip-resistant. Yellow electrostatic epoxy coating for high-visibility and
Reflex vials clearly outline vial bubble
resistance to mortar adherence and corrosion. Patented epoxy system,
for viewing. Glass windows protect all
locks vials into the frame for no loss of accuracy and never readjusting.
vials. 4 plumb vials, 2 level vials, and
Product
Mfg.
Order
Unit
handholes.
No.
No.
Description
Mult.
Weight
374490-B
375020-B
38624
38648
24"
48"
1/0/4
1/0/4
2.000
3.042
LEVELS/ QUARES
Cost
74.99 EA Product
94.99 EA No.
304209-C
320423-C
Aluminum Level (No. 80A-2) - Ideal for framing, trim carpentry,
Mfg.
No.
Description
10135
10136
24"
48"
Order
Mult.
Weight
1/0/6
1/0/6
2.125
4.333
Unit
Cost
43.49 EA
48.99 EA
LE VELS/ Q UARES
and tile applications. 1 horizontal vial and 2 vertical vials.
Replacement End Cap - Replacement end caps fit the Stabila No.
Unbreakable, acrylic vials won’t break,
96M
and 196 model series. Features patented wall grips, red
leak, or fog for life. Yellow electrostatic
pads, for extra stability with 1-hand usage. 2 each per pack.
epoxy coating for high-visibility and
resistance to mortar adherence and
corrosion. Patented epoxy system, locks vials into the frame for no loss of
accuracy and never readjusting.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
359998-B
360015-B
29024
29048
24"
48"
1/0/25
1/0/15
1.000
1.200
LEVELS/ QUARES
Unit
Cost
24.99 EA Product
34.99 EA No.
375055-D
Mfg.
No.
Description
Order
Mult.
Weight
20070
Replacement End Cap
1/12/24
.080
Unit
Cost
3.99 EA
LE VELS/ Q UARES
Electronic Aluminum Level - 360° digital measuring. Display
always reads upright. Select from degrees, % slope, or audio
alert. Certified vail accuracy. In top read
position: 1/32" over 72". Digital
accuracy tolerance: At 0°, 90°=\+.1°,
and 89°=\+.2°. Removable endcaps for
flush measuring into corners. Includes
carrying case. 48".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321826-B
26960
48"electronic Alum Level
1/0/10
2.400
Unit
Cost
189.99 EA
LEVELS/ QUARES
Aluminum Level - Heavy-duty extruded aluminum frame. Acrylic
plastic vials are virtually unbreakable. Baked enamel
finish. Vial covers keep vials
dustproof. Features
shock-absorbing end caps. 18" and
24" levels have ruled edge.
Product
No.
Mfg.
No.
323402-D
10658
323411-D
10660
320496-C
10663
Description
18" long, 1 plumb vial, 1
level vial
24" long, 2 plumb vials, 1
level vial
48" long, 2 plumb vials, 1
level vial
Your representative can give you details
on product availability and shipping requirements!
Order
Mult.
Weight
1/0/6
1.125
14.49 EA
1/0/6
1.500
16.49 EA
1/0/6
2.167
22.49 EA
48" Plastic Level Case - Heavy-duty styrene construction. Twist
lock cap prevents accidental opening. Hang tab on top of
cap. Holes in bottom for drainage.
Product
No.
Mfg.
No.
Description
364096-C
10448
48" Hvy Duty Level Case
Order
Mult.
Weight
1/0/6
1.667
Unit
Cost
11.99 EA
LE VELS/ Q UARES
7-1/2" Super-Cede Level - Top reading magnetic V-groove level.
Powerful magnetic surface self-aligns when used on pipe or
conduit. Sturdy extruded aluminum
body with plumb, level and 45° vials.
Blister packed.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
311049-D
10750
7-1/2" Aluminum Level
1/4/36
.583
Unit
Cost
8.29 EA
Unit
Cost
10-43
HAND TOOLS
LE VELS/ Q UARES
HAND TOOLS
LEVELS/SQUARES
LEVELS/ Q UARES
LEVE SL /SQU ARES
9" Torpedo Level - Solid aluminum body for unrivaled strength and
Rafter Hook - Never lean or drop your level again. Slips into keyed
durability. Plumb view window for easy reading.
V-groove for small pipes. Concave sides
for pipe applications which will rest on a
4-1/4" pipe on its side and 1/2" to 3/4"
pipe with the V-groove on top of the
level. Compact picket size for
convenience.
inserts on any Irwin® Box Beam level.
Safely hangs level out of the way. Perfect
for scaffolding, rafters, even ladders.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
314868-B
2035100
9" Torpedo Level
1/4/12
.667
Unit
Cost
24.99 EA
LEVELS/ Q UARES
Aluminum Box Beam Level - A continuous edge center vial is
accurate and easy-to-see. Rugged box beam design is engineered for
maximum durability. Premium-grade
aluminum construction offers unrivaled
strength. Designed for accuracy and
durability, this straight-line level resists
warping, twisting, or bending, and is
guaranteed to remain accurate, even after sustaining a 2-story drop or 50°
temperature change inside your vehicle. Vials will never break, fade, fog,
leak, or develop static charge, and a luminnous backing makes it easier
read in low light. Plus, you can calibrate vials in seconds with simple turn
of a hex key or Phillips screwdriver. Accuracy rating: Within 0.029° per
meter or 0.0001° per inch.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
314877-B
314886-B
314895-B
314902-B
314911-B
314920-B
314939-A
314948-B
2035101
2035102
2035103
2035104
2035105
2035106
2035107
2035108
24"
24" magnetic
48"
48" magnetic
72"
72" magnetic
96"
96" magnetic
1/4/12
1/4/12
1/4/12
1/4/12
1/0/3
1/0/3
1/0/3
1/0/3
1.583
1.583
3.083
3.083
4.667
4.667
6.000
6.000
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
314975-C
2035600
Rafter Hook
1/4/12
.158
Unit
Cost
5.99 EA
LEVE SL /SQU ARES
WoodTacs™ - Free up your hands. WoodTacs™ work with any Irwin®
Box Beam level. Nails into door jamb,
wood beams, and sheetrock. Great for
framing, job sites, attics, basements,
and more. Create a guide for saws and
routers.
Unit
Cost
49.99 EA
54.99 EA
69.99 EA
74.99 EA
124.99 EA Product
134.99 EA No.
149.99 EA 314984-B
179.99 EA
Mfg.
No.
Description
Order
Mult.
Weight
2035601
Wood Tack Level
1/4/12
.383
Unit
Cost
9.99 EA
LEVE SL /SQU ARES
LEVELS/ Q UARES
Door Jamb Kit - Box Beam levels designed for accuracy and
durability. Aircraft-grade aluminum offers unrivaled
strength. Level resists warping, twisting,
or bending. Guaranteed to remain
accurate, even after 2-story drop or 50°
temperature change. Vials will never
break, fade, fog, leak, or develop static
charge. Luminous backing for easier read in low light. Includes plumb view
vial. Calibrate vials in seconds with simple turn of a hex key or Phillips
screwdriver. Accuracy rating: Within 0.029° per meter or 0.0001° per inch.
Product
No.
Mfg.
No.
Description
314957-B
314966-A
2035400
2035401
78" and 32"
78" and 32" magnetic
10-44
Order
Mult.
Weight
1/0/3
1/0/3
7.433
7.433
Unit
Cost
159.99 EA
179.99 EA
Soft-Sided Carry Bag - Heavy-duty with inner compartment that
protects levels. Holds up to two 4’ levels. Extra side
pockets stores jobsite accessories.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
314993-B
2035602
Level Carry Bag
1/4/12
1.000
Unit
Cost
19.99 EA
LEVE SL /SQU ARES
FatMax® Extreme™ Nonmagnetic Box Beam Level FatMax® Extreme™ box beam level has a 20% stronger box beam cross
section than the FatMax® levels. It has
dual machined leveling surfaces,
bi-material hand grips, which are
screwed to frame, and impact-resistant
protective end caps. The vials are solid
acrylic block for best accuracy (.0005"/
inch). There is a magnified center vial and low profile vial covers for easy
cleaning. Lifetime accuracy warranty.
Product
No.
Mfg.
No.
Description
337941-C
337969-C
43-624
43-648
24"
48"
Order
Mult.
Weight
1/0/3
1/0/3
1.725
2.275
Unit
Cost
34.99 EA
49.99 EA
Service is our priority!
Our commitment is to meet your needs!
HAND TOOLS
LEVELS/SQUARES
LEVELS/ QUARES
LE VELS/ Q UARES
FatMax® Xtreme™ Magnetic Level - FatMax® Xtreme™ box
beam level has a 20% stronger box beam cross section than the
FatMax® levels. It has dual machined
leveling surfaces, bi-material hand grips
which are screwed to frame, and
impact-resistant protective end caps.
The vials are solid acrylic block vials for best accuracy (.0005"/inch), There
is a magnified center vial and low profile vial covers for easy cleaning.
Lifetime accuracy warranty. The magnetic level 2 times stronger rare earth
magnets.
Plastic Level - Plastic and structural foam create a level that is as
strong as aluminum with the weight of
plastic. Extremely accurate and durable
level with ruled edge. Will not mar wood
or scratch paint on household
appliances.
Product
No.
Mfg.
No.
Description
327808-D
327816-D
10101
10102
24" long
48" long
Order
Mult.
Weight
1/0/6
1/0/6
.208
1.833
Unit
Cost
6.99 EA
11.99 EA
LE VELS/ Q UARES
Mfg.
No.
Description
337950-C
337987-C
43-625L
43-649
24"
48"
Order
Mult.
Weight
1/0/4
1/0/3
1.800
2.275
Unit
Cost
39.99 EA
54.99 EA
Tenite Plastic Handle Bevel - 8" long. Improved locking device
holds blade firmly at angle desired.
LEVELS/ QUARES
Jobmaster Aluminum Carpenter’s Level - 3 vials (1 level/2
plumb). I-beam frame with hand-holes and hang-hole. Accurate,
easy-to-read 360° vials and covers are
replaceable.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321547-C
46-825
8" Bevel
1/6/36
.264
Unit
Cost
4.79 EA
LE VELS/ Q UARES
Product
No.
Mfg.
No.
Description
320691-C
337536-B
42-074
42-076
24"
48"
Order
Mult.
Weight
1/0/5
1/0/5
.750
1.900
Unit
Cost
7.99 EA
11.99 EA
LEVELS/ QUARES
12" Workmaster® Steel Square - Buffed steel 12" x 1-1/2" body.
Tongue 8" x 1". 1/16" graduations on face and back. Embossed
graduations and figures. Lacquered
finish.
Torpedo Level - 3 replaceable vials (plumb, level and 45°). 9" long
Product
No.
Mfg.
No.
320799-D
42-191
Description
Order
Mult.
Weight
9" Torpedo Level
1/6/36
.285
Unit
Cost
6.99 EA
LEVELS/ QUARES
9" Magnetic Torpedo Level - Durable aluminum cast frame with
yellow PVC insert. 3 vials (level, plumb, and 45°). Large top
read window. Grooved top surface for
pipe and conduit work. Magnetic base.
Carded.
Product
No.
Mfg.
No.
Description
337773-C
45-912
12" Steel Square
Order
Mult.
Weight
1/0/6
.700
Unit
Cost
5.99 EA
LE VELS/ Q UARES
3" Styrene Line Level - Features patented shake-proof line slips.
Jet black plastic body has unbreakable acrylic vial with
large bubble. Readable from all sides.
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
320717-D
10199
3" Styrene Line Level
1/12/96
.042
Unit
Cost
1.29 EA
LE VELS/ Q UARES
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
357448-D
42-465
9" Magnetc Torpedo Level
1/6/36
.306
Unit
Cost
3" Aluminum Line Level - Solid brass line hooks. Bent glass vial.
Carded.
10.99 EA
LEVELS/ QUARES
Lighted Torpedo Level - High-impact rigid aluminum frame with
unibody rubber construction for durability. Magnetic base,
top edge v-grove and shock resistant
rubber ends. 3 lighted vials (level,
plumb, and 45°) with automatic shut-off
to prevent battery drain. Water
resistant. Requires 2 "AAA" batteries
(not included). Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
360155-B
43-512
Lighted Torpedo Level
1/6/36
.392
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344362-D
10722
3" Aluminum Line Level
1/0/12
.083
Unit
Cost
3.99 EA
Unit
Cost
15.99 EA
10-45
HAND TOOLS
Product
No.
HAND TOOLS
LEVELS/SQUARES
LEVELS/ Q UARES
LEVE SL /SQU ARES
5" Aluminum Pocket Level - Hexagonal with stainless steel clip.
Water Level - Simplifies yard grading, fence building and many other
home, farm and commercial jobs requiring the
establishment of accurate level points, sides or
surfaces. 2 clear plastic tubes with shut-off
valve and breather caps attach to any garden
hose. Operates on the basic law that water
seeks its own level. Can be used indoors or out,
around corners. Simple and easy-to-use.
Packed 1 on card, with instructions on back.
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344273-D
11467
5" Alum Pocket Level
1/0/12
.229
Unit
Cost
Product
4.99 EA No.
325678-D
LEVELS/ Q UARES
Magnetic Post Level - Durable acetate construction. 3-1/4" W. x 4-1/
Mfg.
No.
Description
364118-D
11060
Magnetic Post Level
Description
Order
Mult.
Weight
10309
Water Level
1/6/24
.417
Unit
Cost
12.49 EA
LEVE SL /SQU ARES
Aluminum Yardstick - Long-lasting, accurate, and parallel. Made
2" H. 2 level and 1 plumb vial. Elastic strap
securely holds level on post. 4 magnetic
strips for metal posts. Use for plumbing,
fences, building decks, installing basketball
poles, and mailboxes.
Product
No.
Mfg.
No.
from .090 gauge material, 1-1/4" wide. Has hang-hole in end.
Metric measure on 1 end.
Order
Mult.
Weight
1/0/6
.500
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
304414-D
10189
Aluminum Yardstick
1/0/10
.475
6.79 EA
Unit
Cost
2.99 EA
LEVELS/ Q UARES
LEVE SL /SQU ARES
Fence Post Level - Durable Polycast® frame. 3-1/4" W. x 4-1/2" H. 2
level and 1 plumb adjustment-free acrylic
vials. Stretchable strap allows level to fit
on a round object up to 6" in diameter and
square surfaces 6" square. Use for
plumbing fences, building decks, instaing
basketball poles and mailboxes.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
335851-D
11061
Non-magnetic Post Level
1/6/24
1.000
10-46
Unit
Cost
5.79 EA
Rotary Laser Kit - Dual beam with 3-speed rotation, spot mode, and
short, medium, and long sweep modes. Can be used to
find horizontals, verticals, plumb, and
square. 5/16" at 100’ leveling accuracy,
with a working range of 660’ diameter
with laser detector; 635nm visible red
beam. Kit includes rotary unit, laser
detector, wall bracket, folding ruler/
grade stick, and storage case for laser.
Includes 2 "D" cell batteries.
Product
No.
Mfg.
No.
Description
364355-B
04100
Rotary Laser Level
Order
Mult.
Weight
0/0/1
7.000
Unit
Cost
374.99 EA
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
LEVELS/SQUARES
LEVELS/ QUARES
LE VELS/ Q UARES
CST/Berger
CST/Berger
Laser Level Kit - A professional grade pocket laser level with a
Beam Laser Level - This self-leveling tool emits 5 independent bright
laser dots set accurately at 90° to the
other, allowing rapid set-up of interior
partitioning, shelving, and other internal
installation work. On/Off switch
incorporating a compensator locking
device to protect the unit from damage
during transporation. Auto shutoff after
20 minutes to conserve battery life.
When Out-of-Level the beams blink to
alert the user. Heavy-duty magnetic
damping compensator for rapid and
Product
Mfg.
Order
Unit
stable leveling. Magnetic universal
No.
No.
Description
Mult.
Weight
Cost
330822-B
77-190
Sp1x Laser Lever Kit
1/0/3
2.000
69.99 EA mount allows the unit to be fixed to
standard or camera tripod, magnetically
fixed to a metal surface or strapped to a
CST/Berger
or scaffold. Trivet for working up to and over floor channels. Includes:
Torpedo Laser Level - Using the 360° swiveling base and the laser pipe
Laser, multimount, plumb trivet, strap, target, carrying case, batteries, and
chalkline makes it easy-to-level and layout
instruction manual.
for both vertical and horizontal indoor
Product
Mfg.
Order
Unit
jobs. Special lens for laser chalkline
No.
No.
Description
Mult.
Weight
Cost
effect. Reference ridge built into side of
330886-B
77-154
Sp5 5 Beam Laser Lever
1/0/3
2.333
229.99 EA
level allows easy alignment without a
height offset. 90° rotating mount for
CST/Berger
walls and floors, fitted with 2 pins for
Square Laser Level - The laser level square projects horizontal and
attaching to plaster or drywall. 2
vertical laser chalklines on surfaces. Great
precision vials - 1 level and a bullseye
for floors, tiles, paneling, wall fixtures,
for plumb. Solid machined die-cast
wallpapering, stenciling, wainscoting,
base for stability and strength. Magnetic base. Special base leveling
adjustment for maximum leveling accuracy. Includes: Laser torpedo, laser finish carpentry, outlet switches, lighting
chalkline, wall/stud and floor rotary multimount, batteries, and instruction fixtures, wall studs, partitions, and much
more. Alignment guide for 90° layouts manual.
calculate and turn angles in 5°
Product
Mfg.
Order
Unit
increments. Retractable push-buttons
No.
No.
Description
Mult.
Weight
Cost
330840-B
77-152
Sp2 Torpedo Laser
1/0/3
2.000
49.99 EA to mount to wall surfaces - used with
adhesive putty. Includes: Laser level,
adhesive putty, and instruction manual.
CST/Berger
LEVELS/ QUARES
LE VELS/ Q UARES
LEVELS/ QUARES
Laser Cross Level - The Cross-Line laser level rapidly and
accurately projects both vertical and horizontal lines at
the press of a button. The self-leveling
feature ensures that the lines are level
and alerts the user if the line becomes
out-of-level. Heavy-duty magnetic
damping compensator for rapid and
stable leveling. Out-of-level sensor
automatically alerts the user that the
tool is outside its +/-4° self-leveling
range and is no longer level. (2) 650 nm
diodes for maximum line visibility. 1
button function - easily switch between
4 functions: Horizontal line, vertical,
cross-line, and tilt function. Fitted with
1/4" x 20 thread camera tripod mounting thread. Heavy-duty rubber sleeve
for added protection and comfort-grip. Includes: Laser level, carrying case,
batteries, and instruction manual.
Product
No.
Mfg.
No.
Description
330877-A
77-153
Cl2 Cross Laser Level
Save time by letting us locate those
hard-to-find items for you!
Order
Mult.
Weight
1/0/3
2.333
Unit
Cost
Product
No.
Mfg.
No.
Description
330895-B
77-188
S2 Square Laser Level
Order
Mult.
Weight
1/0/6
3.000
Unit
Cost
39.99 EA
LE VELS/ Q UARES
CST/Berger
Level Laser Plumb Bob - This self-leveling laser plumb bob
creates an accurate, highly visible plumb reference instantly. 1
button, instantly transfer point from floor to ceiling.
Creates an accurate, highly visible plumb reference
instantly. Unique magnetically dampened self-leveling
system settles plumb bob up to 20 times faster than
conventional methods. Combines traditional plumb bob
ease-of-use with laser-accurate alignment. Ideal for
stud plumbing and alignment, ceiling joist and rafter
alignment, establishing diagonals and footings for
decks and patios, aligning and plumbing pipe or
conduit, transferring points from floor to ceiling, fixture installation and
alignment, e.g. lights, fans, etc. Magnetic base. Includes: Laser, carrying
case, and instruction manual.
Product
109.99 EA No.
330902-B
Mfg.
No.
Description
77-189
Pb2 Plumb Laser Lever
Order
Mult.
Weight
1/0/6
.833
Unit
Cost
99.99 EA
10-47
HAND TOOLS
magnetic base for all types of leveling jobs.
Magnetic beam spreader lens with vials and
90°-beam splitter adapter. Reference ridge built
into side of level allows easy alignment without a
height offset. 2 precision vials - 1 level and a
bullseye for plumb. Solid machine die-cast base
for stability and strength. Magnetic base. Special
tripod leveling feet for maximum leveling security.
Includes: Laser level, beam spreader, beam
splitter, mini laser tripod, and batteries.
HAND TOOLS
LEVELS/SQUARES
LEVELS/ Q UARES
LEVE SL /SQU ARES
Steel Carpenter Square - Polished with lacquered finish. Body 24" Squangle All-Purpose Square - All the features found on a
x 2"; tongue 16" x 1-1/2". 1/8" graduations on face and
back. Includes instruction manual.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
304867-D
10747
24" Steel Square
1/0/12
2.000
Unit
Cost
7.29 EA
framing square. Combination square and T-square. Rugged lightweight
anodized aluminum alloy and plastic, easy-to-read
settings and scales. Rules scribed in 1/16" and 1/12"
along 13" body and 4-1/2" right angle as well as on 8-1/
8" adjustable arm. Hip and valley pitch, rule and square
measurements on front. Thumb-screws for angle
adjustment 45° thru 90°. Lever vial located in adjustable
arm. Rafter scale for hip and valley or common types.
Door sill/window sill pitch settings. Protractor setting 45°
thru 90°. Used by carpenters, plumbers, boat builders,
truss makers, steel workers, DIY fans. Carded.
LEVELS/ Q UARES
Steel Professional Rafter Square - Polished with lacquered
finish. Body 24" x 2"; tongue 16" x 1-1/2". Square has brace measure,
octagon scale, board measure and
100th scale, 1/16" and 1/8" graduations
on face. 1/12" and 1/16" on back.
Tongue 1/16" and 1/8" on face, 1/10"
and 1/12" graduations on back.
Includes instruction manual.
Product
No.
Mfg.
No.
Description
304840-D
10442
24" Steel Rafter Square
Order
Mult.
Weight
1/0/6
2.000
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
323448-C
10231
All-purpose Square
1/6/24
.833
6" Pocket Combination Square - Graduated in 8ths and 16ths
on 1 side, 16th and 32nds other side. Features ground edges, level,
and scriber. Die-cast metal handle. Carded.
8.99 EA
Product
No.
Mfg.
No.
Description
310093-D
10227
6" Combination Square
Quick Square® - Aluminum lightweight, yet durable construction. For
use as a saw guide for special angle
measurements and cuts, and as a
protractor. Detailed instruction book
included. Measures 6-3/4" x 6-3/4" x
10-1/4"
Mfg.
No.
Description
324143-C
46-067
Alum Angle Rafter Square
Description
304832-D
10440
24" Alum Rafter Square
10-48
Weight
1/0/6
.433
Unit
Cost
8.29 EA
12" Combination Square - Steel 12" x 1" blade graduated 8ths and
16ths on 1 side, 16ths and 32nds on other. Feature level
and scriber. Die-cast metal handle
adjusts to any position and locks with
brass screw. Carded.
Order
Mult.
Weight
1/0/3
.400
Unit
Cost
6.99 EA
Aluminum Professional Rafter Square - Polished aluminum
with embeded easy-to-read figures. Body 24" x 2"; tongue 16" x 1-1/2".
Square has brace measure, octagon scale,
board measure, and 100th scale, 1/16" and 1/8"
graduations on face; 1/12" and 1-1/16" on back.
Tongue 1/16" and 1/8" on face, 1/10" and 1/12"
graduations on back. Includes instruction
manual.
Mfg.
No.
Order
Mult.
LEVE SL /SQU ARES
LEVELS/ Q UARES
Product
No.
9.99 EA
LEVE SL /SQU ARES
Unit
Cost
LEVELS/ Q UARES
Product
No.
Unit
Cost
Order
Mult.
Weight
1/0/6
.750
Product
No.
Mfg.
No.
Description
304808-D
10225
12" Combination Square
Order
Mult.
Weight
1/0/6
.567
Unit
Cost
7.79 EA
LEVE SL /SQU ARES
16" Professional Combination Square - 16" x 1" stainless
steel blade graduated 8ths and 16ths on 1 side, 16ths and 32nds on other.
Zinc head. Features ground edges, level, and scriber.
Die-cast metal handle adjusts to any position and locks
with brass screw. Carded.
Unit
Cost
9.29 EA
Product
No.
Mfg.
No.
Description
344389-D
11053
16" Combination Square
Order
Mult.
Weight
1/0/4
1.500
Unit
Cost
13.79 EA
We can become your single-source supplier
on many of the products you currently use!
LE VELS/ Q UARES
Speed® Square - Combines features of the framing, try, miter, and
protractor squares. Booklet included with each
tool explains basic construction
including rafter length tables.
Approximately 7-1/2" x 7-1/2" x 10-1/2".
Aluminum alloy.
Folding Miter Square - Self-locking, high-quality, Swedish stainless
steel blade. Permanent laser etched scale on both
sides. Locking positions at each 22.5°
between 0° and 180°. Stainless steel blade
with deeply engraved scales on both sides.
Folds into gold color, anodized aluminum
holder. 1/16" graduations.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
316535-D
S0101
7-1/2" Speed Square
1/5/50
.600
Unit
Cost
11.49 EA
LEVELS/ QUARES
12" Speed® Square - Cast aluminum alloy. Measures 12" x 12" and
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315251-C
315260-C
AC800
AC1200
8"
12"
1/6/24
1/6/24
.458
.625
Unit
Cost
29.99 EA
35.99 EA
LE VELS/ Q UARES
Try-Mitre Square - Black plastic handle. 8" blade is highly plated, 1/8"
17" across the diagonal, which is marked off in degrees
from 0° to 90°. Features scribe bar,
notched every 1/4", to lay out parallel
lines. Lay-put bar adjusted out to fit out of
square corner. 2 adjustable stop pins can
be set for proper run and proper rise.
Package includes instruction booklet for
roof construction and stairway building.
graduations with convenient hang-hole.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302821-C
S0107
12" Speed Square
1/5/15
2.000
LEVELS/ QUARES
Unit
Cost
Product
25.99 EA No.
305294-D
Mfg.
No.
Description
10230
8" Tri-mitre Square
Order
Mult.
Weight
1/0/6
.683
Unit
Cost
3.99 EA
LE VELS/ Q UARES
Speed® Square Tool Pouch - Provides a handy carrying pouch
for 3 of the most frequently used tools of the trade: the
Speed® square, a tape measure (up to 25’ x
1") and a hammer. Made of heavy-duty, 8
oz., top grain cowhide leather, with washer
reinforced rivets for lasting durability. Use
with belts up to 2-1/2" wide.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
370940-C
T0104
Square Tool Pouch
1/5/25
.500
The product representations in this catalog are for reference only,
and are subject to change without notice.
Aluminum Drywall Square - For drywall cutting and layout, also
plywood and sheet metal work. Head and blade of treated
aluminum, securely riveted with 5 rivets.
Head has lipped edge. Head is 1/4" x 2"
x 22-1/2", blade is standard outlet box
width. Large 1/16" markings can be
read from either end. Holes in blade for
marking studs at 16" center.
Product
No.
Mfg.
No.
Description
304290-C
355151-D
10182
11154
48"
54"
Order
Mult.
Weight
1/0/6
1/0/6
2.000
4.000
Unit
Cost
21.49 EA
26.49 EA
Unit
Cost
16.99 EA
10-49
HAND TOOLS
HAND TOOLS
LEVELS/SQUARES
LEVELS/ QUARES
HAND TOOLS
GAUGES
GAUGES
STU DSEN SORS
Magnetic Protractor - Magnetic base. Finds or measures any angle
of pitch or slope. Easy reading dial with adjustable
angle pointer. Built-in angle pitch
calculator on back.
Butt Gauge - Marks sharp edges and cuts. For fast, easy, price butt
hinge installation. Cuts clean, accurate, deep,
complete profile on door by striking a hammer. Just
remove chips, repeat operation on jamb. Use on wood
only.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
327921-D
10156
Magnetic Protractor
1/6/48
.250
LEVELS/ Q UARES
Unit
Cost
Product
10.99 EA No.
320860-D
320879-D
Brass Stair Gauge Set - Solid brass. For use with carpenter and
rafter squares for fast layout of stair treads. 2 per card.
Mfg.
No.
Description
Order
Mult.
Weight
BGM35
BGM4
3-1/2" long
4" long
1/0/6
1/0/6
.138
.163
Unit
Cost
8.49 EA
8.99 EA
STU DSEN SORS
Stud Sensor - Nonmagnetic tool measures wall density. Works on
sheet rock, wood, and plaster. Locates exact center of
studs with light indicator. Picture hanging kit included.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
353337-C
45-711
Brass Stair Gauge
1/3/36
.190
Unit
Cost
4.49 PR
LEVELS/ Q UARES
General Tools
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Unit
Cost
Contour Gauge - Ideal for woodworking, linoleum installation, or any 307580-B 58381
Stud Sensor
1/8/48
.357
12.99 EA
job where contour duplication is essential.
Inch graduation on body. Stainless steel
pins. Component parts are enamel
Stud Sensor Pro SL - Nonmagnetic tool measures wall density.
painted and brass-plated. Size is 6" x
SpotLite™ pointing system locates edges of studs with
3-1/2".
bright beam and sound. Finds both wood and metal
studs. Deep Scan™ technology penetrates extra thick
wall coverings. Works on sheetrock, wood, plaster, and
acoustic ceilings. Inner pack of 8 comes on a
preloaded clip strip.
STU DSEN SORS
Product
No.
Mfg.
No.
Description
310684-D
837
Contour Gauge
10-50
Order
Mult.
Weight
1/0/5
.503
Unit
Cost
9.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301949-B
58108
Stud Sensor Pro
1/8/24
.435
Unit
Cost
19.99 EA
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
STUD SENSORS
STUD SENSO RS
STUDSENSORS
Stud Sensor Combo - Includes Studsensor™ Pro and iSensor®
metal finder. Stud sensor locates edges of studs with
LEDs and audio alarm. Finds both wood
and metal studs. Deep Scan™ technology
penetrates extra thick wall coverings.
Works on sheetrock, wood, plaster, and
acoustic ceilings. Metal finder scans
through any nonmetallic surface up to 2"
deep, depending on metal size and
material. LED will blink faster as you
approach metal. Typical accuracy of 3/16",
No. 4 rebar up to 2" deep, 1/2" copper rod
up to 1" deep and No. 6 drywall screw up
to 1" deep. Each unit requires one 9V
battery, not included. Carded.
StudSensor™ Pro SL-AC - StudSensor™ Pro SL-AC finds wood
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
335975-B
59245
Metal Finder/stud Sensor
1/0/12
1.000
360252-B
59544
Stud Sensor Pro
1/4/12
.833
22.99 EA
Unit
Cost
24.99 EA
STUD SENSO RS
STUDSENSORS
Stud Sensor Combo - Includes Studsensor™ Pro and iSensor® AC
voltage finder. Stud sensor locates edges of studs
with LEDs and audio alarm. Finds both
wood and metal studs. Deep Scan™
technology penetrates extra thick wall
coverings. Works on sheetrock, wood,
plaster, and acoustic ceilings. AC voltage
finder scans for wires through drywall up to
3" deep. Finds any wires not shielded by
metal, even in plastic conduit. Locates
standard 120/240V AC household wiring.
Each unit requires one 9V battery, not
included. Carded.
Do it Best Professional™ Pro Stud Sensor - Nonmagnetic
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
336335-B
59243
Voltage Fndr/stud Sensor
1/0/12
1.000
322207-B
322207
Triscan Stud Sensor
1/4/12
.633
Unit
Cost
tool finds metal (rebar and metal pipes), studs and joists behind walls,
floors, and ceiling. Scans through drywall,
plywood, and most flooring up to 1-1/2" thick to
find wood and metal studs and joists. Actively
searches for hot electrical wire.
22.99 EA
Unit
Cost
29.99 EA
STUD SENSO RS
STUDSENSORS
Do it Best™ SpotLite™ Stud Sensor Pro - Nonmagnetic tool
measures wall density. SpotLite™ pointing system locates edges of studs
with bright beam and sound. Finds both wood and
metal studs. Deep Scan™ technology penetrates
extra thick wall coverings. Works on sheetrock, wood,
plaster, and acoustic ceilings.
MultiScanner™ Pro - Nonmagnetic tool measures wall density.
Precisely locates wood or metal studs through 1-1/4" sheet
rock. Deep Scan® mode scans through up to 1-1/2"
of drywall, plywood, and most flooring to locate:
Joists, metal, and rebar. Can find rebar under 3" of
concrete. Actively searches for hot electrical wire.
SpotLite® pointing system automatically displays a
beam of light over the edge of a stud. Battery
included. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
322190-B
322190
Spot Light Stud Sensor
1/4/48
.250
15.99 EA
397792-B
56990
Multiscanner Pro
1/4/12
.833
Some products shown may need to be special ordered
for your convenience!
Unit
Cost
39.99 EA
10-51
HAND TOOLS
Unit
Cost
and metal studs and joists behind walls, floors, and ceilings
up to 1-1/2" (38 mm) deep and indicates the presence
of hot wires. Finds both wood and metal studs, select
between 3/4" scan depth and patented 1-1/2"
DeepScan® mode. Patented SpotLite® Pointing
System, audio signal, and LEDs indicate stud edges.
Nonmarring wall pads. Continuously detects and
warns of hot AC wires, detects the presence of
unshielded, hot AC wires in all modes for safety.
Locates standard household 120/240V AC wiring.
Finds wires in plastic conduit or Romex cable.
HAND TOOLS
MAGNETS
MAGNE TS
MAGNETS
Ceramic Block Magnet -
Holding And Retrieving Magnet - For holding, lifting, and
hanging objects from metal walls, beams, and doors. Can be bolted or
screwed to most surfaces to retrieve scattered
nails, washers, and other metal items.
Product
No.
Mfg.
No.
362743-E
07001
362751-E
07044
Order
Mult.
Weight
1/12/144
.096
Description
3/16" x 1/4" x 7/8", 8 per
card
3/8" x 7/8" x 1-7/8", 2 per
card
1/12/144
.285
Unit
Cost
Product
1.79 EA No.
362557-D
2.29 EA
Mfg.
No.
07204
Description
2 oz., 5/8" W. x 13/16" H. x
1-3/4" L., lifts up to 18 lb.
Order
Mult.
Weight
1/0/12
.250
Unit
Cost
4.99 CD
MAGNETS
STUD FINDE R
Magnetic Tape - Flexible with adhesive backing. Holds small metal
objects. Can be cut to desired length. 1/16" thick.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
319090-D
07019
1" x 10’
1/6/36
.200
Heavy-Duty Retrieving Magnet - For retrieving tackel boxes,
anchors, tools, motors, and other metal items from waterways. Attach
a rope or rod to magnet’s eyebolt for
retrieving metal items in hard to reach
places. 26 oz., 2" W. x 1-1/16" H. x 5" L.
Lifts up to 150 lb. Clamshell.
Unit
Cost
6.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
362662-D
07208
150lb Retrieving Magnet
1/0/12
1.750
Unit
Cost
15.49 EA
MAGNETS
MAGNE TS
Universal Latch magnet - Lifts up to 50 lb. Powerful latch magnet Handle Magnet - For lifting, suspending, holding, and retrieving metal
objects. Use to clean up scattered iron objects
such as screws, nuts, and bolts, or to separate
magnetic from nonmagnetic materials.
set in durable red plastic casing with 4 elongated holes
allows multidirectional and adjustable
mounting. Heavy-duty door closure
latch comes with 1/8" thick steel strike
plate with countersunk holes to
accommodate flat head screws.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
362530-D
07502
50lb Multi Mntng Magnet
1/6/36
.333
Unit
Cost
7.99 CD
MAGNE TS
Latch Magnet - Lift, suspend, hold, and retrieve metal objects. Can be
screwed to most surfaces for use as a door
stop, small tool holder, magnetic clamp,
and to separate magnetic from
nonmagnetic materials. 5-1/2 oz., 3/4"
W. x 1-1/16" H. x 2" L., lifts up to 50 lb.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
362549-D
07202
100lb Latch Magnet
1/0/12
.667
10-52
Product
No.
Mfg.
No.
362573-D
07212
362581-D
07213
Description
3 oz., 3/4" W. x 1" H. x 1-1/
16" L., lifts up to 25 lb.
6 oz., 3/4" W. x 1" H. x 2" L.,
lifts up to 50 lb.
Order
Mult.
Weight
Unit
Cost
1/6/72
.250
6.29 CD
1/6/36
.417
8.29 CD
Unit
Cost
11.49 CD
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
MAGNETS
Continued From Previous Column
MAGN ETS
Rubber Handle Magnet - Lifts up to 100 lb. Perfect for moving and
retrieving and moving metal items such as shelves and
pipes. Encased in durable red plastic
shell with easy-grip rubber handle. 2
Magnetic Shields™ block magnetic
strength when not in use for easy
storage.
Product
No.
Mfg.
No.
345807-D
07270
345816-D
07271
345834-D
07272
Description
2 oz., 1.18" W. x .79" H. x
.79" D., with 5.2mm hole,
.63" between poles, 13 lb.
pull
4 oz., 1.57" W. x 1" H. x 1"
D., with 5.0mm hole, .75"
between poles, 22 lb. pull
6 oz., 1.77" W. x 1.18" H. x
1.18" D., with 5.0mm hole,
.875" between poles, 30 lb.
pull
Order
Mult.
Weight
Unit
Cost
1/12/72
.188
9.99 EA
1/12/72
.344
16.99 EA
1/12/72
.500
21.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
362603-D
07501
100lb Handle Magnet
1/4/24
.750
Unit
Cost
Red Alnico Horseshoe Magnet No. 2 Pull - Horseshoe
7.99 CD
shaped magent is ideal for picking up anything metal relating to your job.
MAGN ETS
Magnetic Base - Use to position, lift, hold, and mount keys,
shoplights, tools, and more. For use on steel surfaces
such as refrigerators, machinery, filing cabinets,
beams, and doors. Magnetic base in chrome
plated cup.
Product
No.
Mfg.
No.
Description
331670-D
07279
2lb Horseshoe Magnet
Order
Mult.
Weight
1/12/144
.120
Unit
Cost
3.99 EA
MAGNET S
Product
No.
Mfg.
No.
362611-E
07215
362638-E
07216
362646-D
07217
314927-D
07222
353736-D
07223
Order
Mult.
Weight
1/0/12
.167
2.29 CD
1/0/12
.167
2.29 CD
1/12/144
.167
3.29 CD
1/0/12
.340
5.99 EA
1/6/36
.633
7.49 EA
Description
.625 oz., 1-3/16" diameter,
lifts up to 4 lb., 2 per card
1.2 oz., 1-3/8" diameter, lifts
up to 15 lb, 1 per card
2.25 oz., 2" diameter, lifts up
to 25 lb., 1 per card
6 oz., 2-5/8" diameter, lifts
up to 65 lb., 1 per card
10 oz., 3-3/16" diameter, lifts
up to 95 lb., 1 per card
Unit
Cost
100 Lb. Heavy-Duty Retrieving Magnet - Use the eye hook on
the top or the side of the magnet and use it to hold, lift, and hang objects.
Includes 2 ceramic magnets encased
in bright red plastic casing with black
rubber sides. 2 Magnetic Shields™
are used to block magnetic strength
when magnet is not in use. Shields
also allow for easy storage.
MAGN ETS
Horseshoe Heavy-Duty Alnico Power Magnet - Red
horseshoe magnets with keeper to retain magnetic power. Ideal for school
experiments. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
300470-D
07503
100lb Retrieving Magnet
1/4/24
.830
Unit
Cost
10.99 EA
MAGNET S
Pocket Magnetic Pickup - Powerful permanent Alnico magnet in
an aluminum holder with pocket clip. For retrieving small
tools, nuts, bolts, etc. 6" long with
knurled handle, pocket clip, 2 lb. pull,
neodymium magnet.
Product
No.
Mfg.
No.
345790-D
07225
Description
1 oz., 1.875" W. x 2.375" H.
x .25" D., no hole, .375"
between poles, 1 lb. pull
Order
Mult.
Weight
1/24/96
.089
Unit
Cost
4.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321556-D
07264
Pocket Magnet Pickup
1/12/72
.083
Unit
Cost
4.49 EA
Continued Next Column
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
10-53
HAND TOOLS
MAGNET S
HAND TOOLS
MAGNETS
MAGNE TS
MAGNETS
Telescoping Magnet Pickup - Strong permanent neodymium
24" Magnetic Floor Sweeper - For clearing construction sites,
magnet in nickel-plated telescoping holder with pocket clip. Extends
from 6" to 24". For retrieving small parts and removing dust and
chips from drilled holes.
shop aisles, loading docks, parking areas, and stables. Collects
nails, screws, wires, staples, and other
metal remnants. Easy to operate in water
and over most terrain. Durable aluminum
housing. 48" handle.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
319031-D
07228
Telscoping Magnet Pickup
1/24/72
.083
Unit
Cost
Product
No.
Mfg.
No.
Description
362670-D
MFSM24
24" Magnet Floor Sweeper
5.29 EA
Order
Mult.
Weight
0/0/1
26.000
MAGNE TS
MAGNETS
Flexible Magnetic Pickup - 19" nickle-plated flexible magnetic
pickup. Great for retrieving small items in tight places.
Carded.
24" Magnetic Floor Sweeper - Heavy-duty, quick-release
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Product
No.
Mfg.
No.
Description
387487-D
07229
Flexible Magnet Pickup
1/12/72
.150
315281-D
MFSM24RX
24" Magnet Floor Sweeper
Unit
Cost
Unit
Cost
104.99 EA
magnetic sweeper. For cleaning construction sites, shop aisles, loading
docks, parking areas, and stables. Collects nails,
screws, wires, staples, and other metal remnants.
Easy-to-operate in water and over most terrain.
Durable aluminum housing. 48" handle.
5.29 EA
Order
Mult.
Weight
0/0/1
43.000
Unit
Cost
189.99 EA
MAGNE TS
UTILTY KNI VES
Flexible and Rigid Extendable Magnetic Pickup - 18"
nickle-plated rigid magnetic pickup. Unscrew the handle and slide the
metal shaft out, turn the shaft around, and screw the 2 handle
parts together to extend to a full 32" of flexible pickup tool. Great
for retrieving small items in tight places. Carded.
24" Magnetic Tool Holder - Organizes, holds, and displays
hardware items such as hammers, pliers, screwdrivers, wrenches, and
more. Mounts easily to walls or
workbenches. Clamshell.
Product
No.
Mfg.
No.
315265-D
07269
10-54
Description
Order
Mult.
Weight
Flexible Magnet Pickup
1/0/12
.150
Product
No.
Mfg.
No.
Description
362654-D
07261
24" Magnetic Tool Holder
Order
Mult.
Weight
1/0/6
3.833
Unit
Cost
18.49 EA
Unit
Cost
8.99 EA
Your representative can give you details
on product availability and shipping requirements!
HAND TOOLS
MAGNETS
MAGN ETS
UTIL TYKNI VES
Techni Edge Mfg.
Magnetic Sweeper - Great for quick clean-up around the house,
Do it® Adjustable Utility Knife - Strong 2-piece die-cast body.
garage, and yard. Collects nails, screws, wires,
staples, and other metal remnants. 27"
sweeping width, 29" overall width, and 41"
handle.
Blade locks in 3 extended positions or fully closed. Color: Metallic
gray. Includes one .025 blade. Carded.
Made in U.S.A.
Product
No.
Mfg.
No.
Description
301272-D
301272
Adj Utility Knife
Order
Mult.
Weight
1/10/100
.208
Unit
Cost
4.49 EA
UTIL TYKNI VES
Techni Edge Mfg.
body with full metal adjustment slide. Comes with one .025 blade.
Product
No.
Mfg.
No.
Description
353744-D
07265
27" Magnet Floor Sweeper
Order
Mult.
Weight
0/0/1
5.500
Unit
Cost
54.99 EA
UTIL TYKN IVES
Magnetizer And Demagnetizer - Screwdriver magnetizer and
demagnetizer quickly and easily makes small tools magnetic to keep
hard-to-handle screws and nuts in position. Insert tool
into center slot to magnetize. Slide tool thru side groove
to demagnetize. 1-piece. Blister pack.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
300683-D
03-946CS
Utility Knife
1/12/96
.292
Unit
Cost
2.49 EA
UTIL TYKNI VES
Techni Edge Mfg.
Universal Utility Knife Blade - Five .025 blades per card. Blade
will fit Hyde, Stanley®, and all other popular brands.
Product
No.
Mfg.
No.
Description
314137-E
03-053
Universal Knife Blade
Order
Mult.
Weight
1/10/100
.055
Unit
Cost
1.49 CD
UTIL TYKNI VES
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
300632-D
7224
Magnetizer
1/12/96
.144
Unit
Cost
2.29 EA
UTIL TYKN IVES
Reid Industries
Pik Stik Reacher - Constructed of durable 3/4" square ABS plastic.
Vinyl tips and rubber cushioned grips. Reaches up
to 32". 3 lb. lift capacity. For grabbing items in
hard to reach places. Eliminates bending,
stooping, and climbing on stools and ladders.
Techni Edge Mfg.
Single Edge Razor Blade - Blade is notched and features a steel
back. Fits all types of single edge scrapers. 100 pack
blister.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
345849-C
05-121C
100pk Razor Blade
1/0/50
.840
Unit
Cost
8.29 PK
UTIL TYKNI VES
Utility Knife - 3-position retractable blade; full, half and 1 quarter out.
Lightweight die-cast aluminum handle in
2 sections, provides blade storage.
Includes 3 model No. 11-921
heavy-duty blades. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
353434-C
P321
32" Blk/yel Pickup Stick
1/0/12
.667
Service is our priority!
Our commitment is to meet your needs!
Unit
Cost
22.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
336121-B
10-099
Utility Knife
1/6/36
.272
Unit
Cost
4.49 EA
10-55
HAND TOOLS
Plastic Retractable Utility Knife - Yellow high-impact plastic
HAND TOOLS
UTILITY KNIVES
UTIL TYKNI VES
UTILTY KNI VES
Fixed Blade Swivel Lock Utility Knife - Aluminum body. Quick Super Heavy-Duty Retractable Knife - Strong lightweight
blade change, just push-button for new blades stored in handle. Includes 3 aluminum handle with brass fastener. Large, ergonomic handle for comfort
model No. 11-921 heavy-duty blades.
and control. Quick blade change, no
tools required. 5-position retractable
blade.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305286-C
10-399
Utility Knife
1/6/72
.253
Unit
Cost
6.49 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344885-B
10-122A
Utility Knife
1/6/36
.020
Unit
Cost
15.99 EA
UTIL TYKNI VES
UTILTY KNI VES
Utility Knife - Quick blade change without taking knife apart. Blade
storage magazine in rear. Replacement blades
front loading. String cutting feature in
body. Push-button blade adjustment to
4 positions. Includes 3 model No.
11-921 blades. Carded.
Utility Knife - Interlock retractable knife. Cushion DynaGrip® surface.
Nonslip grip even while wearing gloves.
Resists blade slipping even at extreme
angles. Additional comfort in extreme
temperatures.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
347002-C
10-499
Utility Knife
1/6/36
.273
Unit
Cost
6.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344893-C
10-779
Utility Knife
1/6/36
.422
Unit
Cost
9.49 EA
UTIL TYKNI VES
UTILTY KNI VES
Swivel Lock® Retractable Utility Knife - Rugged aluminum
body. Yellow finish. Knife swivels open with the push of a button for quick,
easy blade changes. Interlocking nose.
3-position retractable blade slide.
Includes 3 model No. 11-921
heavy-duty blades. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
354066-C
10-989
Utility Knife
1/6/72
.354
Utility Knife - Instant Change™ utility knife designed for comfort,
control, and balance. Push-button quick blade change.
Swing out blade change. Swing out blade storage
magazine. Soft rubber grip. Includes 3 model No. 11-921
heavy-duty blades. Carded.
Unit
Cost
8.99 EA
UTIL TYKNI VES
Mitey Knife - With key chain. Lightweight 2-piece plastic handle.
Push-button action locks blade in 2 cutting
positions. Includes extra model No.
11-031 blade in handle. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
393681-B
10-788
Utility Knife
1/6/36
.586
Unit
Cost
11.99 EA
UTILTY KNI VES
FatMax® Swivel Lock® Utility Knife - Knife swivels open with
Product
No.
Mfg.
No.
335033-C
10-039
Description
Order
Mult.
Weight
Mitey Knife
1/12/72
.049
Unit
Cost
2.79 EA
UTIL TYKNI VES
Utility Knife - Rugged aluminum die-cast handle. Positive fixed blade
retention. Includes 3 model No. 11-921
heavy-duty blades. Classic 199®.
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
336130-C
10-209
Hd Utility Knife
1/6/72
.276
10-56
the push of a button for quick, easy blade changes, no tools required.
Bi-material DynaGrip™ soft panels for
better grip. Curved handle design for
better comfort, control, and balance.
Magnet in nose holds blade while
changing blades. Ideal for drywallers,
roofers, and framers. Includes 3 model
No. 11-921 heavy-duty blades. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321427-B
10-799
Fat Utility Knife
1/6/36
.944
Unit
Cost
9.99 EA
Unit
Cost
7.79 EA
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
UTIL TYKNI VES
FatMax® Locking Retractable Utility Knife - Knife swivels
open with the push of a button for quick, easy blade changes, no tools
required. Adjustable thumb dial locking
wheel to help secure blade in place.
Bi-material DynaGrip™ soft panels for
better grip. Curved handle design for
better comfort, control, and balance.
Ideal for drywallers, roofers, and
framers. Includes 3 model No. 11-921
heavy-duty blades. Carded.
Knife Blade - Razor-sharp hooked ends cut linoleum, roofing material,
to full thickness on first cut. Opens
cartons without scoring goods packed
inside as blade cuts only to depth of
hook. For use with Stanley® and other
makes of utility knives. 2-1/16" x .025.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
393312-B
10-777
Fat Utility Knife
1/6/36
.345
Product
No.
Mfg.
No.
335952-D
11-961
345792-C
11-961A
Unit
Cost
13.49 EA
Description
5 blades per package, 10
packages per box
100 blade dispenser pack, 6
per box
Order
Mult.
Weight
Unit
Cost
1/10/200
.053
6.79 PKG
1/0/6
1.017
69.99 PK
UTIL TYKN IVES
C. H. Hanson
UTIL TYKNI VES
Insulation Utility Knife - The only insulation knife that has a built-in Knife Blade - Extra large hook for thicker materials. Razor-sharp
stuffing blade. Blade is designed to break off easily
for new, sharp blade, Easy blade
adjustment that holds blade securely in
place. Ergonomically designed for
optimum cutting. Rotary wheel
compresses insulation. Utility knife has
a hang hole for easy storage. Uses
7-point snap-off replacement blade.
hooked ends cut linoleum, roofing material, to
full thickness on first cut. Opens cartons
without scoring goods packed inside as
blade cuts only to depth of hook. For
use with Stanley® and other makes of
utility knives.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
324660-C
03020
Insulation Knife
1/0/12
.483
Unit
Cost
Product
No.
Mfg.
No.
Description
386332-D
352128-B
11-983
11-983A
5 blade pack
100 blade dispenser pack
12.99 EA
UTIL TYKN IVES
Order
Mult.
Weight
1/10/200
1/0/24
.055
.862
Unit
Cost
6.79 EA
59.99 EA
UTIL TYKNI VES
Knife Blade - Pointed razor-type reversible blades for utility knives.
Scoring Blade - Scores formica and other laminates for quick clean
Regular blades are interchangeable for use with
model No. 99, 199, 299, and 1299 knives and
most other utility knives. Heavy-duty blades are
interchangeable with model No. 99, 199, 299,
and 1299 and other utility knives. Model No.
11-911A and 11-921A include sturdy plastic
dispenser for safety and convenience. Has hang
holes for wall mounting.
break. For use with model No. 99, 199, 299 and
1299 knives. 2 blades per package. 10
packages in box.
Product
No.
Mfg.
No.
Description
336568-C
11-941
2pk Scoring Blade
Order
Mult.
Weight
1/10/200
.025
Unit
Cost
2.79 PKG
UTIL TYKNI VES
Product
No.
Mfg.
No.
335970-C
11-911A
333268-E
11-911
335998-C
11-921A
333366-D
11-921
386359-C
11-921T
386340-C
11-931
Description
2" x .017" (regular), 100
blade dispenser
2" x .017", 5 blades per
package, 10 packages per
box
2-7/16" x .025" (heavy-duty),
100 blade dispenser
2-7/16" x .025", 5 blades per
package, 10 packages per
box
2-7/16" x .025", 10 blades
per pack, 10 pack case
2-7/16" x .035", 5 blades per
pack
Order
Mult.
Weight
Unit
Cost
1/0/24
.625
16.99 CD
10/0/200
.039
1.49 PK
1/6/24
1.063
16.99 CD
10/0/200
.058
1.49 PK
1/10/100
.141
2.99 PK
1/10/200
.070
2.29 PK
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
Mitey Knife Blade - Replacement blade. Packed 3 per card. 10 cards
per box.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
300695-C
11-031
Mitey Knife Blade
1/0/10
.013
Unit
Cost
2.49 CD
10-57
HAND TOOLS
UTILITY KNIVES
UTIL TYKN IVES
HAND TOOLS
UTILITY KNIVES
UTIL TYKNI VES
UTILTY KNI VES
Single Edge Razor Blade - Reinforced back. Carbon steel blades. Titanium Edge Utility Knife Blade - Blades have a high-speed
steel edge with titanium coating that keeps the blades cutting after
others have quit. The patented bi-metal construction
allows the blades to bend and flex without breaking.
The 4 notch system allows the blade to extend
further. Fits all standard utility knives and are great
for cutting drywall, insulation, flooring, roofing, and
more.
10 blades per package.
Product
No.
Mfg.
No.
Description
386308-C
28-510
10pk Razor Blade
Order
Mult.
Weight
1/10/100
.088
Unit
Cost
2.49 PK
UTIL TYKNI VES
ProTouch Fixed Blade Utility Knife - Includes 6 patented
Irwin® Blue Blades™. Optimized cutting angle for reduced fatigue. Easy
tool-free entry. ProTouch ergonomic
grip. Inside storage for 5 blades.
Product
No.
Mfg.
No.
332045-D
332063-C
20350-GOLD5C 5 pack
20351-GOLD50D 50 pack
Description
Order
Mult.
Weight
1/0/10
1/0/5
.200
.080
Unit
Cost
3.99 EA
21.99 EA
UTILTY KNI VES
Quick Change Fixed Utility knife - The fixed blade utility knife
has a 1-piece stainless stel titanium-coated nose which eliminates
spreading, resists wear, and is extremely durable. No
tools are needed to open the utility knife to access the
blades. Stores up to 10 blades in the internal blade
storage. Each utility knife comes with 3 Lenox gold
titanium edge utility blades.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
314788-B
2081200
Pro Fixed Blade Knife
1/5/25
.340
Unit
Cost
8.99 EA
UTIL TYKNI VES
ProTouch Retractable Utility Knife - Quick-Change®
mechanism allows for easy blade removal and reversal without opening.
Includes 6 patented Irwin® Blue
Blades™. Optimized cutting angel for
reduced fatigue. ProTouch ergonomic
grip. Inside storage for 5 blades.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
314804-B
2082200
Pro Retrct Utility Knife
1/5/25
.464
Unit
Cost
10.99 EA
UTIL TYKNI VES
Product
No.
Mfg.
No.
Description
332027-C
20354-SSFK1
Gold Fixed Utility Knife
Order
Mult.
Weight
1/0/5
.560
Unit
Cost
14.79 EA
UTILTY KNI VES
Quick Change Retractable Knife - Quick change retractable
utility knife has a 1-piece stainless steel titanium-coated nose which
eliminates spreading, resists wear, and is extremely durable.
Quick blade release allows rotation or changing of blade
without opening handle. No tools are needed to open the
utility knife to access the blades. Stores up to 5 blades in the
internal blade storage.
Bi-Metal Utility Knife Blade - The Irwin® Blue Blade™ is the
revolutionary unbreakable utility blade. Its patented bi-metal
technology sets new standards of performance, by
providing an unbreakable blade that stays sharp 3 times
longer.
Product
No.
Mfg.
No.
314813-C
333491-C
314840-B
314859-B
2084100
2084200
2084300
2084400
10-58
Description
Order
Mult.
Weight
5 pack
20 pack
50 pack dispenser
100 pack dispenser
1/5/25
1/0/5
1/0/5
1/0/5
.172
.360
.760
1.380
Product
No.
Mfg.
No.
Description
332072-C
20353-SSRK1
Retractble Utility Knife
Order
Mult.
Weight
1/0/5
.560
Unit
Cost
15.99 EA
Unit
Cost
1.99 PK
6.99 EA
15.99 PK
24.99 PK
Save time by letting us locate those
hard-to-find items for you!
HAND TOOLS
UTILITY KNIVES
UTIL TYKN IVES
UTIL TYKNI VES
Linoleum Blade - Made from tempered high-carbon steel. Keen blade FatMax® Carpet Knife - Cast-metal handle for strength and
durability. Rubberized handle for better grip. D-ring fastener
for quick-change blade. Accepts both
regular and heavy-duty blades (.015
and .017). 10 regular-duty blade
storage with magnet. Swivels open.
Overlap design prevents blade
slippage.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
330564-C
11-980
Linoleum Blade
1/6/36
.052
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
318329-C
10-555
Fatmax Carpet Knife
1/6/36
.286
Unit
Cost
12.79 EA
UTIL TYKNI VES
4.49 EA
Folding Lock-Back Carpet Knife - Lightweight aluminum handle
UTIL TYKN IVES
Carpet Knife Blade - Single slot with double cutting edge. Fits
Stanley® model No. 10-515, 10-520, and 10-555.
2-1/2" long. 5 blades per card.
Product
No.
Mfg.
No.
Description
305383-D
11-525
5cd Carpet Knife Blade
Order
Mult.
Weight
1/10/100
.041
with convenient belt clip. Quick change blade mechanism. 1-hand
opening operation with spring blade release.
Uses standard carpet knife blades. Sheffield
Manufacturing brand name.
Unit
Cost
2.79 PKG
UTIL TYKN IVES
FatMax® Xtreme™ Retractable Utility Knife - FatMax®
Xtreme™ retractable blade utility knife is made from die-cast aluminum
which makes it light yet durable. The
die-cast all-metal construction is
designed for use in extreme job site
conditions. It has an ergonomically
shaped handle for comfort, textured
die-cast finish for positive slip-resistant
grip, large knurled clamping dial that
locks blade in place and allows user to control width of knife opening even
with gloves on. The knife swivels open for easy blade change and clean
out - no tools required. It holds the model No. 11-921T (10pk dispenser) or
up to 25 individual blades. Retractable has a 3-position retractable blade.
Retractable - used most often for wallpaper, scoring, and electrical.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
337763-B
10-815L
Alumnm Retractable Knife
1/0/12
.742
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
309268-B
12118
Cp Lock-back Knife
1/12/36
.861
Unit
Cost
14.99 EA
UTIL TYKNI VES
Folding Lock-Back Utility Knife Set - Lightweight aluminum
handle with convenient belt clip. Quick change blade mechanism. 1-hand
opening operation with spring blade
release. Uses standard utility knife
blades. Mini knife with key chain.
Sheffield Manufacturing brand name.
Unit
Cost
12.99 EA
UTIL TYKN IVES
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
309277-B
12117
Lock-back Knife Set
1/12/72
.944
FatMax® Xtreme™ Fixed Utility Knife - FatMax® Xtreme™
Unit
Cost
17.99 EA
fixed blade utility knife is made from die-cast aluminum which makes it
light yet durable. The die-cast all-metal
construction is designed for use in
Fixed Blade Scoring Knife And Blades - For scoring heavy
extreme job site conditions. It has an
laminated-type materials. 2-piece die-cast handle is easy-to-use with a
ergonomically shaped handle for
straight-edge. Does not include blade.
comfort, textured die-cast finish for
4-7/8" long.
positive slip-resistant grip, large knurled
clamping dial that locks blade in place.
The knife swivels open for easy blade change and clean out - no tools
required. It holds the model No. 11-921T (10pk dispenser) or up to 25
individual blades. Fixed blade - primarily used for roofing and drywall work. Product
Mfg.
Order
Unit
UTIL TYKNI VES
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
337914-B
10-816L
Aluminum Fixed Knife
1/0/12
.725
We can become your single-source supplier
on many of the products you currently use!
Unit
Cost
12.99 EA
No.
No.
Description
338567-C
338575-C
10-519
11-942
Scoring knife
Scoring knife blade,
heavy-duty blade, fits
Stanley® knives model No.
10-599, 10-519, and 10-199.
1 per card
Mult.
Weight
1/6/36
1/10/200
.206
.034
Cost
7.99 EA
3.29 EA
10-59
HAND TOOLS
edge stays sharp longer, cuts easier. Blade fits
model No. 519, 10-550, 10-209,
10-399, and 10-299 utility knives. 1 in
package, 6 in counter display.
HAND TOOLS
SCRAPERS
Scrapers
CUT ERS
Techni Edge Mfg.
Hand Scraper - Removes paint, glue, putty, or adhesives from glass, Do it® Replacement Blades - 7-point per blade. Fits model No.
314196 Do it® heavy-duty snap blade knife.
tile, walls, floors, or other smooth surfaces. Use
standard razor blades. Carded. Includes 5 blades.
Product
No.
Mfg.
No.
Description
386316-C
28-500
Retractable Hand Scraper
Order
Mult.
Weight
1/10/100
.190
UTIL TYKNI VES
Techni Edge Mfg.
Unit
Cost
Product
2.79 EA No.
314218-E
355437-E
Roofing Knife - Laub style roofing knife. 2 knives in 1 with double
sided hook blade. 6-3/4" long. Made from high-carbon tool
steel. Easy grip textured handle. For trimming valleys, gable
ends, ridge rolls, starter, etc., in any kind of weather.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315400-D
04-401
Roofing Knife
1/12/72
.167
Mfg.
No.
Description
314218
355437
5 blades per card
10 blade tube
Order
Mult.
Weight
1/10/100
1/10/100
.120
.252
Unit
Cost
2.99 CD
4.29 EA
CUT ERS
Klein Tools
Electricians Pocket Knife - Tempered, carbon steel blade. Riveted
construction with large shackle. Durable, plastic handle is
textured for better gripping. Contains 2
blades: 2-1/2" standard spearpoint and
2-1/2" screwdriver tip blade with cutting
edge that locks open. Overall closed
length is 3-3/4".
Unit
Cost
7.49 EA
CUT ERS
Techni Edge Mfg.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Roofing Knife Blade - Laub style roofing knife blade.
318558-B
1550-2
Pocket Knife
1/0/6
.355
Unit
Cost
22.99 EA
CUT ERS
Klein Tools
Electricians Scissors - Heavy-duty 5" scissors made of
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315419-D
04-045
5 Pack Roofing Blade
1/0/20
.021
Unit
Cost
nickel-plated tempered steel. Lower blade is serrated to minimize
slippage of wire when cutting. Upper
blade has notches for stripping 19 and
23-gauge wire.
4.29 EA
CUT ERS
Techni Edge Mfg.
Do it® Heavy-Duty Snap Blade Knife - Includes 1 blade with
7-point. Positive locking action.
Product
No.
Mfg.
No.
Description
318531-B
2100-7
5" Electrician Scissors
Order
Mult.
Weight
1/0/6
.190
Unit
Cost
15.99 EA
CUT ERS
Window Scraper - Scrapes paint from windows, mirrors, tiles, and
other flat surfaces. Uses model No. 11-921
heavy-duty utility knife replacement
blade. Individually carded.
Product
No.
Mfg.
No.
Description
314196-E
314196
Snap Blade Knife
Order
Mult.
Weight
1/10/100
.120
Unit
Cost
Product
2.79 CD No.
352406-D
10-60
Mfg.
No.
Description
Order
Mult.
Weight
28-593
Window Scraper
1/4/24
.113
Unit
Cost
3.79 CD
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
CUTTERS
CUT ERS
CUT ERS
Fletcher Terry
Glass Cutter - 5" overall length. Ball knob for tapping glass. Alloy steel Replacement Mat Cutting Blade - Blade cuts mat board,
cardboard, and foam board up to 1/4" thick. For use with model No. 8448,
8460, and F-3000. 10 blades per tube.
wheel.
Mfg.
No.
Description
Order
Mult.
Weight
315199-D
102370
Glass Cutter
1/12/144
.076
Unit
Cost
3.79 EA
CUT ERS
Glass Cutter - For sheet and general glass cutting where tapping is
recommended. Overall length 5". Carded.
Product
No.
Mfg.
No.
Description
354058-E
05-001
Mat Cutting Blade
Order
Mult.
Weight
10/0/100
.013
Unit
Cost
.79 EA
CUT ERS
Fletcher Terry
Replacement Plastic Cutting Blade - Scores plastics and
acrylics up to 1/4" thick. For use with model No. 8448, 8460, and F-3000.
10 blades per tube.
Product
No.
Mfg.
No.
Description
301728-E
05-712
Plastic Cutter Blade
Order
Mult.
Weight
10/0/100
.010
Unit
Cost
4.79 EA
CUT ERS
Fletcher Terry
Product
No.
Mfg.
No.
350890-D
106370
Description
Order
Mult.
Weight
Glass Cutter
1/12/144
.083
Unit
Cost
2.79 EA
CUT ERS
Fletcher Terry
Heavy-Duty Plastic Cutter - Score acrylics, Plexiglass, Formica,
and tile up to 1/4" thick. Replaceable blades. Refer to model
No. 05-613 for replacement blades.
Framemaster™ Point Driver - Easy to load magazine holds 100
wax-free stacked Framer’s Points. Reverse magazine and load 100
Glazier’s Points. Nose plate guides points
straight, 1 at a time, without double feeding or
jamming. Full-grip trigger, tension adjustment
screw. Uses model No. 08-950 and 08-990
points.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315826-C
07-500
Point Driver
0/0/1
1.000
Unit
Cost
94.99 EA
CUT ERS
Product
No.
Mfg.
No.
Description
344699-C
05-120
Hvy Duty Plastic Cutter
Order
Mult.
Weight
1/0/5
.600
Unit
Cost
24.99 EA
CUT ERS
Fletcher Terry
Replacement Cutter Blade - Replacement blade for heavy-duty
Fletcher Terry
Framer’s Or Glazier Points - Stacks of 100 each. 3000 points per
box. The unique flat design guarantees secure, flat to the
surface holding. For use with model No.
07-500 Framemaster™.
plastic cutter, model No. 05-120. 5 per card.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344184-C
05-613
Replace Cutter Blade
1/0/10
.075
Unit
Cost
18.99 CD
CUT ERS
Fletcher Terry
Steel Wheel Glass Cutter - General-purpose.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
339048-D
01-122
Glass Cutter
1/10/280
.100
Unit
Cost
3.79 EA
CUT ERS
Fletcher Terry
Fluid Glass Cutter - Fiberlock, anti-leak fluid dispensing valve lays
down a perfect bead of cutting fluid along score.
140° long life tungsten carbide cutting
wheel. Fixed or swivel head.
Interchangeable heads available.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344168-C
344176-D
344680-D
01-711
03-712
09-541
Narrow head glass cutter
Replacement head
Cutting fluid
1/0/10
1/0/10
1/0/12
.150
.044
.292
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
Product
No.
Mfg.
No.
315818-C
315788-D
08-950
08-990
Description
Framer’s Points
Glazier Points, stacks of 100
each in a reusable plastic
tube containing a total of
1000 points, Glazier points
are designed flat, but smaller
than framer’s points so that
they can be easily glazed
over
Order
Mult.
Weight
1/0/10
1/0/10
1.400
.294
Unit
Cost
17.49 PK
7.29 PK
Unit
Cost
29.99 EA
22.99 EA
8.29 EA
10-61
HAND TOOLS
Product
No.
HAND TOOLS
MITER BOXES
MiterBoxes
SAWS
Fletcher Terry
Glass Nipping Pliers - 8" lightweight. For cut-running and break-out
of glass up to 1/4" thick. Comfort contoured handles
Do it™ Coping Saw - 6-1/2" coping saw with plastic handle. Frame
and body are fibre reinforced for extra
size 5/32" x 11/32" with a 4-3/4" depth cut. Heavy
strength.
nickel-plated frame and fully adjustable
balde. Made in U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
334227-C
06-112
8" Glass Nipping Pliers
1/0/10
.300
Unit
Cost
Product
14.99 CD No.
318454-D
MITE RBOX ES
Mfg.
No.
Description
Order
Mult.
Weight
318454
Plastic Coping Saw
1/12/72
.528
Unit
Cost
4.49 EA
SAWS
Do it™ Plastic Miter Box - 12" with ruled edge. 90° and 45° face
cuts. 12" L. x 4" W. x 2-1/4" H. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
326276-E
326276
12" Plasic Miter Box
1/0/12
1.083
Do it Best® Coping Saw - 6-1/2" coping saw with finished
hardwood handle and heavy-duty highly polished thick rust-resistant
nickel plating. Frame size 3/16" x 3/8"
with a 6-1/2" depth cut. 360° adjustable
blade. Made in U.S.A.
Unit
Cost
Product
4.99 EA No.
303772-C
MITE RBOX ES
Mfg.
No.
Description
Order
Mult.
Weight
303772
Wood Coping Saw
1/6/24
.750
Unit
Cost
6.99 EA
SAWS
Do it™ Wood Miter Box - 12". 90° and 45° face cuts. Joined with
brass screws for durability. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
318506-D
318506
12" Wood Miter Box
1/0/12
2.583
ProTouch™ Coping Saw - Flat-Bar™ frame. High-speed steel
blade allows for precision cutting. DuraSteel™ pins.
Ergonomic triangular ProTouch™
handle allows for comfort and control.
Frame depth: 5-1/2" (140mm). Blade
length: 6-1/2" (160mm).
Unit
Cost
Product
5.99 EA No.
MITE RBOX ES
337601-C
Mfg.
No.
Description
Order
Mult.
Weight
2014400
6.5" Protouch Coping Saw
1/4/24
.408
Unit
Cost
9.99 EA
SAWS
Do it™ Wood Miter Box With Saw - 12" wood mitre box and 14"
spring steel mitre backsaw with wood handle. Saw has 12TPI with a 3"
depth under reinforced sleeve. 90° and
45° face cuts. Joined with brass screws
for durability. Made in U.S.A.
Product
No.
Mfg.
No.
Description
380946-C
380946
12" Wood Miter Box
10-62
Order
Mult.
Weight
1/0/4
2.333
Unit
Cost
Do it™ Dovetail Saw - 10"/11TPI. Dovetail saw with wood handle.
Precision ground teeth and polished steel blade. Provides
fine, smooth finish cuts. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
317594-D
317594
10" Dovetail Saw
1/2/24
1.400
Unit
Cost
11.49 EA
13.99 EA
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
SAWS
SAWS
SAWS
Coping Saw Blades - Made of finest spring steel. Cuts intricate
shapes. Pin end style. Carded.
Handsaw - 8-point. Square and mitre features in saw handle. Induction
hardened teeth preserve sharp cutting
edge. Contoured polypropylene handle
with textured finger grips.
Product
No.
Mfg.
No.
Description
311291-C
352825-C
15-350
15-355
26"
20"
Order
Mult.
Weight
1/0/6
1/0/6
1.640
1.280
Unit
Cost
12.79 EA
11.79 EA
Product
No.
Mfg.
No.
332313-D
48575
332305-D
48576
332291-D
48577
332348-D
48578
332356-D
48579
318203-D
48580
332364-D
48581
Description
6-3/8" blade, 18TPI, .018"
gauge x .090" width, 4
blades per card, use to cut
plastic and plywood
6-3/8" blade, 18TPI, .020"
gauge x .090" width, 4
blades per card, use for
woodcutting, replaces
Parker model No. 11-P
6-3/8" blade, 15TPI, .020"
gauge x .125" width, 4
blades per card, use for
woodcutting, replaces
Parker model No. 6-1/2-P
6-3/8" blade, 10TPI, .020"
gauge x .125" width, 4
blades per card, use for
woodcutting, replaces
Parker model No. 33-P
6-3/8" blade, 32TPI, .014"
gauge x .250" width, 2
blades per card, use for
metal cutting, replaces
Parker model No. 00P
6" blade, 15TPI, .020" gauge
x .125" width, 4 blades per
card, use for wood cutting
6-piece assorted set of 6-3/
8" blades, includes 2 each of
model No. 48576, 48577,
and 48578
Order
Mult.
Weight
Unit
Cost
1/5/100
.076
2.99 CD
1/5/100
.076
2.99 CD
Short Cut® Handsaw - Fast-cutting tooth design cuts clean and
efficient. Short blade is easier to handle. Extra wide
hardwood handle for comfort and
control. 20", 8-point.
Product
No.
Mfg.
No.
Description
316601-C
15-335
20" 8pt Handsaw
Order
Mult.
Weight
1/0/4
1.565
Unit
Cost
21.49 EA
SAWS
1/5/100
.076
2.99 CD
Short Cut Tool Box Saw - 15", 9-point . New tooth configuration
that cuts clean and faster than conventional handsaws. Short
convenient blade, comfortable
hardwood handle with square/miter
feature.
1/5/100
.076
3.29 CD
1/5/100
.076
Product
3.29 CD No.
316628-B
Mfg.
No.
Description
15-334
15" 9pt Handsaw
Order
Mult.
Weight
1/0/4
.970
Unit
Cost
14.49 EA
SAWS
1/5/100
.190
2.99 CD
1/5/100
.076
4.29 CD
Jet Cut® Tool Box Saw - 14", 9-point. Aggressive tooth design cuts
wood faster. Induction-hardened teeth stay sharper
longer. Dynagrip™ handle gives you a
nonslip grip for extra sawing power.
17-1/2" overall.
SAWS
Compass Saw - High grade tempered steel blade. Teeth precision set
and sharpened for fast and smooth cutting.
Hardwood handle. 12".
Product
No.
Mfg.
No.
Description
345202-C
20-222
14" 9pt Handsaw
Order
Mult.
Weight
1/0/4
1.970
Unit
Cost
16.99 EA
SAWS
FatMax® Handsaw - Hardened tempered and set blade. 15", 9TPI,
Product
No.
Mfg.
No.
Description
357278-C
15-100
12" Compass Saw
Order
Mult.
Weight
1/0/6
.600
Unit
Cost
11.49 EA
SAWS
Do it Best® 15" Pro Handsaw - This 9-point aggressive tooth
toolbox saw is designed for faster, more efficient cutting. Hardened
teeth stay sharp longer. 45° or 90°
wood handle with rubber grip allows for
easier usage.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
319863-D
319863
15" Pro Handsaw
1/2/24
1.125
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
aggressive tooth handsaw. FatMax® cuts up to 50%
faster than traditional tooth designs.
Extra large handle with ergonomic
rubberized grip over traditional wood.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
395498-B
20-045
15" Handsaw
1/6/36
.306
Unit
Cost
17.99 EA
Unit
Cost
14.99 EA
10-63
HAND TOOLS
SAWS
HAND TOOLS
SAWS
SAWS
SAWS
Short Cut® Saw - Aggressive tooth design cuts wood 50% faster than Jab Saw - Self-starting point for plunge cutting. Can be used for close
conventional saws. Induction hardened teeth stay
quarter sawing. Accepts standard
sharp longer. Extra wide hardwood
reciprocating saw blades. Carded.
handle. Handle design allows for the
back of the saw to be used for marking
45° and 90° angles.
Product
No.
Mfg.
No.
Description
357189-C
357197-C
357200-B
357219-B
15-085
15-086
15-087
15-088
15", 9-point
15", 12-point
20", 8-point
20", 12-point
Order
Mult.
Weight
1/0/4
1/0/4
1/0/2
1/0/2
.970
.970
1.565
1.565
Unit
Cost
18.49 EA
18.79 EA
22.99 EA
23.99 EA
SAWS
11-1/2" Standard Utility Saw - Thick-Body™ offers a 1mm size
blade. Aggressive Tri-Ground™ teeth eliminate the need to
sharpen blade. Hardwood handle
provides comfort and control.
Product
No.
Mfg.
No.
337594-C
2014200
Description
Order
Mult.
Weight
11.5" Std Utility Saw
1/4/24
.429
Unit
Cost
13.99 EA
SAWS
Dovetail Saw - Cuts a true, smooth, and narrow kerf. 10" x 2-3/4"
blade with a heavy steel back. Mahogany handle.
15-point.
Product
No.
Mfg.
No.
Description
357243-C
15-022
10" 15pt Dovetail Saw
Order
Mult.
Weight
1/0/2
.515
15.79 EA
Drywall Saw - Cushion grip drywall saw is fully hardened and
tempered for strength and durability. Sharp tip for
plunge cuts. Blade is epoxy bonded to
handle for a secured fit and long life.
Order 10 and receive a pre-loaded
clip-strip.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
372706-C
15-556X
Drywall Saw
1/0/12
.357
SAWS
Unit
Cost
Mfg.
No.
Description
Order
Mult.
Weight
357308-C
15-033
Jab Saw
1/6/36
.304
Unit
Cost
6.29 EA
SAWS
FatMax® Jab Saw - Self-starting point for plunge cutting. FatMax®
jab saw has unique ergonomic handle for nonslip
use. Blade to handle connection is
strongest in industry. Can be used for
close quarter sawing. Sharpened tip for
easy punching through drywall.
Hardened and tempered blade for
durability and professional quality.
Carded. Order 12 and receive pre-loaded clip-strip.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
395501-C
20-556X
Jab-fat-max Saw
1/0/12
.357
Unit
Cost
13.99 EA
SAWS
Folding Pocket Saw - Versatile, compact. Accepts standard sabre
and reciprocating saw blades. Folds like jackknife;
extra blade storage in handle. Blade
lock for safety. Durable plastic nonslip
grip handle.
Unit
Cost
SAWS
Product
No.
Product
No.
Mfg.
No.
Description
311251-C
15-333
Folding Pocket Saw
Order
Mult.
Weight
1/0/6
.433
Unit
Cost
10.99 EA
SAWS
Tri-Fold Reciprocating Saw - Lenox® tri-fold reciprocating saw
has a heavy-duty aluminum handle and comfortable
ergonomically molded grip. Blade folds
into handle for storage. Locks in 3
different positions, for hard-to-reach
places. Includes metal and wood
cutting reciprocating saw blades.
Accepts standard 1/2" tang
reciprocating saw blades.
7.99 EA Product
No.
324241-C
Mfg.
No.
Description
TFHS618636
Tri-fold Recip Saw
Order
Mult.
Weight
1/0/5
.667
Unit
Cost
21.49 EA
SAWS
6-1/2" Standard Drywall and Jab Saw - Rigid (1.2mm) blade.
Bi-Ground teeth. Hardwood handle allows for comfort and control.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
337585-D
2014102
6.5" Std Drywall/jab Saw
1/4/24
.279
Unit
Cost
4.99 EA
Shark Corp
Pull Stroke Handsaw - Pull stroke saws provide a more accurate
and controlled cut, reduce binding and allow a safer,
easier start. Thin kerf carbon steel
blades provide a faster, cleaner cut.
Blade is flexible to allow flush cuts.
Teeth are electric impulse hardened for
sharpness that lasts up to 10 times
longer than conventional handsaws.
Removable handle with soft cushion-grip. Zippered pouch.
Product
No.
Mfg.
No.
355011-C
10-2312
355046-C
10-2315
Description
General-purpose, 12",
14-point
General-purpose, 15",
10-point
Order
Mult.
Weight
Unit
Cost
1/6/36
.667
21.49 EA
1/6/36
1.139
27.49 EA
Continued Next Column
10-64
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
SAWS
Continued From Previous Column
Product
No.
Mfg.
No.
Description
355062-C
355054-C
10-2410
10-2420
Fine cut, 10-5/8", 19-point
Fine cut, 10-5/8", 15-point
SAWS
Shark Corp
Pull Stroke Handsaw Replacement
SAWS
Order
Mult.
Weight
1/6/36
1/6/36
.611
.583
Unit
Cost
Plastic Pipe Handsaw - Designed for cutting PVC and ABS plastic
pipe, wood, and drywall without binding. Cuts on both push
and pull strokes. Die-cast aluminum
handle, replaceable tempered carbon
steel blade. 2-5/8" W. x 18" L. blade.
Refer to model No. HSB-18 for
Blade - Blades are easily replacement blade.
25.99 EA
22.99 EA
replaceable with the push of a button.
Mfg.
No.
362336-C
01-2312
362352-C
01-2410
Description
12", 14-point, fits model No.
10-2312
10-5/8", 19-point, fits model
No. 10-2410
Order
Mult.
Weight
Unit
Cost
1/6/36
.389
13.99 EA
1/6/36
.306
16.49 EA
Mfg.
No.
Description
360589-C
HSF-180
Pvc/aba Pipe Handsaw
Order
Mult.
Weight
1/0/5
1.000
Unit
Cost
21.49 EA
SAWS
Handsaw Replacement Blade - 18" long replacement blade for
plastic pipe handsaw, model No. HSF-180.
SAWS
Shark Corp
Pull Stroke Handsaw - Fine cut saw for smooth finish cuts. Pull
stroke saws provide a more accurate and controlled cut,
reduce binding, and allow a safer,
easier start. Thin kerf carbon steel
blades provide a faster, cleaner cut.
Blade is flexible to allow flush cuts.
Teeth are electric impulse hardened for
sharpness that lasts up to 10 times
longer than conventional handsaws. Removable handle is made of
high-impact ABS plastic with a textured grip. 9-1/2" double blade has
19-points per inch on 1 edge and 9-points per inch on the other. Refer to
model No. 01-2440 for replacement blades.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355070-C
10-2440
9pt/19p Pull Handsaw
1/6/36
.861
Unit
Cost
Product
No.
Mfg.
No.
Description
360597-C
HSB-18
Pvc/abs Blade
Order
Mult.
Weight
1/0/5
.500
Unit
Cost
12.79 EA
SAWS
Bow And Hacksaw - 2 saws in 1. Hacksaw for cutting metal and
plastic. Bow saw for wood and general yard work. Comes
with 12" hacksaw and 12" bow saw blade. Built-in
hand guard for safety. 6" throat makes cutting plastic
pipe and small trees easy. Blade guard included for
safety.
25.99 EA
SAWS
Shark Corp
Handsaw Replacement Blade - Replacement blade for pull
stroke handsaw, model No. 10-2440. 9-1/2".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
362379-C
01-2440
9-1/2" Replacement Blade
1/6/36
.361
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
387592-C
218HP-300
12" Bow/hacksaw
1/2/10
1.740
Unit
Cost
11.49 EA
SAWS
16.49 EA
SAWS
ProTouch™ 10" Multi Saw - Extra thick blade is available in metal
Close Quarter Handsaw - Cuts where other frames can’t. Easy to
and wood. Ergonomic ProTouch™ handle provides comfort
and control.
change blades. Rigid solid bar construction; hardened
carbon blade. Refer to model No. 906
for replacement blade.
Product
No.
Mfg.
No.
Description
334316-C
908
Close Quarter Handsaw
Order
Mult.
Weight
1/0/5
1.600
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
337610-D
2015100
10" Protouch Multi Saw
1/4/24
.304
Unit
Cost
11.99 EA
Unit
Cost
13.79 EA
SAWS
Handsaw Replacement Blade - Replacement blade for model
No. 908 close quarter handsaw, size -6" x 1/4" x .014. 32TPI. 10 blades
per card.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
334308-C
906
Close Quarter Blade
1/0/10
.050
Your representative can give you details
on product availability and shipping requirements!
Unit
Cost
11.79 EA
10-65
HAND TOOLS
Product
No.
Product
No.
HAND TOOLS
SAWS
SAWS
SAWS
Mini Hacksaw - Does everything a big hacksaw will do, and more.
Cuts angles and curves. Cuts in tight places where
a big hacksaw can’t. Pocket size with
vinyl clad handle. Uses regular
hacksaw blades or broken ones. 8-3/4"
overall length without blade.
FatMax® Hacksaw - 1-piece durable, die-cast metal body for
prolonged life, allowing for extra high tension (330
lb./150 kg). Quick and easy blade
change with pretensioning. Comes with
a bi-metal blade, 24TPI. Power load
sliding tension, gives extra leverage to
help increase tension, and better
control when releasing the blade.
Thumb-dial adjustable tension
mechanism with quick change features
allows for tension memory - no resetting after each blade change.
Ergonomically designed countoured handle and front thumb grip to give
better control. 4-3/4" cutting capacity.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
353593-C
20-807
Mini Hacksaw
1/6/36
.208
Unit
Cost
4.79 EA
SAWS
Hacksaw - Reinforced composition pistol-grip handle. Nickel-plated
steel frame holds blades rigidly. Frame is
adjustable for 8", 10" and 12" blades. 4
blade positions. Furnished with 10"
Tungsten hard edge blade. 2-7/8"
throat. 12" capacity.
Product
No.
Mfg.
No.
Description
317865-C
15-565
8-12" Hacksaw
Order
Mult.
Weight
1/0/6
.872
Unit
Cost
Product
No.
Mfg.
No.
Description
321529-B
20-531
12" Fatmax Hacksaw
Order
Mult.
Weight
1/2/4
2.450
Unit
Cost
29.99 EA
SAWS
Mini Hacksaw - Constructed of die-cast aluminum. Designed for hard
to get at places. Cuts bolts, wire, tubing and
plastic. Includes bi-metal 10" blade.
5.49 EA
SAWS
Hacksaw - Steel frame and unbreakable molded vinyl handle. D shape
guard protects hand and knuckles.
Frame is adjustable with ample tension
for 8", 10", and 12" blades. 4 blade
positions. Furnished with 10" Tungsten
hard edge blade. 3-7/8" throat. 12"
capacity.
Product
No.
Mfg.
No.
Description
317856-C
15-265
8-12" Hacksaw
Product
No.
Mfg.
No.
Description
330744-C
975
Mini Hacksaw
Weight
1/0/5
.200
Unit
Cost
9.49 EA
SAWS
Professional Hacksaw Frame - Lever in handle tensions 12"
Order
Mult.
Weight
1/0/6
.744
Unit
Cost
13.79 EA
SAWS
Professional Hacksaw Frame - High-tension frame holds blade
at up to 32,000 P.S.I. Blade will not twist or bend. Tension guide
on handle lever. Quick release blade
changing mechanism in handle,
maintains tension setting. Blade
storage in frame. Includes 12" blade.
Depth of cut 4".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
357294-B
15-113
Pro Hacksaw
1/2/12
1.817
Unit
Cost
blade to 30,000 PSI. Blade won’t twist or bind. Mounts at 45°
for flush cutting. Use as jab saw or
compass saw. Comes with 12" blade.
Spare blades store inside back. Cast
aluminum and steel frame. Depth of cut
4".
Product
No.
Mfg.
No.
Description
330736-C
4012
12" Hacksaw Frame
Order
Mult.
Weight
1/0/5
1.000
Unit
Cost
29.49 EA
SAWS
Bi-metal Hacksaw Blades - Safe and shatterproof. Hardened
high-speed steel cutting edge is electron beam welded to spring
tempered alloy steel back. Use for
cutting pipe, conduit, bar and rod,
aluminum, copper and steel. 12" L. x 1/
2" W. x .025" thick.
25.99 EA Product
No.
330752-D
330787-D
330795-D
330809-D
330817-D
330825-D
374172-C
374180-C
374199-C
10-66
Order
Mult.
Mfg.
No.
Description
218HE
224HE
232HE
S218HE
S224HE
S232HE
V218HE
V224HE
V232HE
18TPI, bulk
24TPI, bulk
32TPI, bulk
18TPI, 1 per card
24TPI, 1 per card
32TPI, 1 per card
18TPI, 10 per pouch
24TPI, 10 per pouch
32TPI, 10 per pouch
Order
Mult.
Weight
10/0/100
10/0/100
10/0/100
1/0/10
1/0/10
1/0/10
1/0/5
1/0/5
1/0/5
.020
.043
.043
.050
.050
.050
.220
.220
.220
Unit
Cost
2.29 EA
2.29 EA
2.29 EA
2.49 EA
2.49 EA
2.49 EA
19.49 PK
19.49 PK
19.49 PK
Service is our priority!
Our commitment is to meet your needs!
HAND TOOLS
HACKSAW BLADES
Hacksaw Blades
SAWS
M. K. Morse
Carbon Steel Hacksaw Blades - High-carbon steel blade for
general purpose use. Double heat-treatment; flexible back for less
breakage. 2 blades per card.
Mfg.
No.
Description
333433-D
333441-D
333468-D
333476-D
333484-D
333492-D
48231
48232
48233
48236
48237
48238
10" long, 18TPI
10" long, 24TPI
10" long, 32TPI
12" long, 18TPI
12" long, 24TPI
12" long, 32TPI
Order
Mult.
Weight
1/10/200
1/10/200
1/10/200
1/10/200
1/10/200
1/10/200
.100
.100
.100
.125
.125
.125
Unit
Cost
1.49 CD
1.49 CD
1.49 CD
1.49 CD
1.49 CD
1.49 CD Product
No.
SAWS
369527-D
369535-D
Mfg.
No.
Description
HHCTCG10
HHCTCG12
10" long
12" long
Order
Mult.
Weight
1/0/5
1/0/5
.110
.130
Unit
Cost
3.99 EA
4.49 EA
PLIERS
M. K. Morse
HSS Hacksaw Blades - High-speed steel. Flexible back; cuts
toughest alloys quickly, cleanly. Double heat-treatment makes
cutting edges hard and sharp. 1 blade
per card.
Product
No.
Mfg.
No.
Description
333506-D
333514-D
333522-D
333530-D
333549-D
333557-D
48240
48241
48242
48245
48246
48247
10" long, 18TPI
10" long, 24TPI
10" long, 32TPI
12" long, 18TPI
12" long, 24TPI
12" long, 32TPI
Order
Mult.
Weight
1/10/200
1/10/200
1/10/200
1/10/200
1/10/200
1/10/200
.063
.063
.063
.075
.075
.075
SAWS
Grit Rod Saw - Fits standard hack-saw frames. Tungsten carbide grit
Unit
Cost
is permanently bonded to rod to provide high
abrasion resistance. 360° cutting
surface allows it to cut in any direction.
Ideal for hard-to-cut materials including
ceramic wall tile, chrome-plated steel,
cast-iron, glass, brick, stranded cable,
stainless steel, fiberglass, and marble. Rod saw can be reversed for added
life. Carded.
1.99 CD
1.99 CD
1.99 CD
2.29 CD Product
2.29 CD No.
2.29 CD 369500-D
369519-D
Mfg.
No.
Description
Order
Mult.
Weight
HRCTCG10
HRCTCG12
10" long
12" long
1/0/10
1/0/10
.060
.070
Unit
Cost
3.49 EA
3.99 EA
PLIERS
Anglo American
Bi-metal Hacksaw Blade - Bi-metal, shatterproof, high-speed steel
cutting edge. Flexible steel back; lasts 5 times longer
than standard blade. 1 blade per card.
Product
No.
Mfg.
No.
Description
333565-D
333573-D
333581-D
333603-D
333611-D
333638-D
48260
48261
48262
48265
48266
48267
10" long, 18TPI
10" long, 24TPI
10" long, 32TPI
12" long, 18TPI
12" long, 24TPI
12" long, 32TPI
Order
Mult.
Weight
1/10/200
1/10/200
1/10/200
1/10/200
1/10/200
1/10/200
.063
.063
.063
.075
.075
.075
Knipex Alligator Box Joint Pliers - Made from chrome
vanadium steel. Self-gripping jaws designed for nonslip on round pipes,
hex nuts, and square bolt work pieces.
7-position joint adjustments. Optimal
lever action. Special hardened teeth.
Guard on handle design eliminates
finger pinching.
Unit
Cost
Product
No.
Mfg.
No.
Description
2.29 CD
2.29 CD
2.29 CD
2.49 CD
2.49 CD
2.49 CD
391360-C
391379-C
391387-C
KN8801-7BKA
KN8801-10BKA
KN8801-12BKA
7"
10"
12"
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
.600
.600
1.200
Unit
Cost
24.49 EA
26.99 EA
36.99 EA
PLIERS
Anglo American
Knipex Cobra Box Joint Pliers - Made from chrome vanadium
steel. Press button action for fast and firm adjustment directly on the
workpiece. 11-position joint adjustment.
Single hand adjustment. Self-gripping
jaws designed for nonslip on round
pipes, hex nuts, and square bolt work
pieces. Optimal lever action. Special
hardened teeth. Guard on handle design eliminates finger pinching.
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
Product
No.
Mfg.
No.
Description
391336-C
391344-C
391352-C
KN8701-7BKA
KN8701-10BKA
KN8701-12BKA
7"
10"
12"
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
.600
.767
1.233
Unit
Cost
32.49 EA
37.49 EA
49.99 EA
10-67
HAND TOOLS
Product
No.
Grit Hacksaw - Fits standard hacksaw frames. Tungsten carbide grit is
permanently bonded to extra wide 3/4" blade
designed for straight cutting. Ideal for
hard-to-cut materials like ceramic wall
tile, chrome-plated steel, cast-iron,
glass, brick, stranded cable, stainless
steel, fiberglass, and marble. Blade can
be reversed for added life. Carded.
HAND TOOLS
PLIERS
PLIERS
PLI ERS
Anglo American
Knipex Long Nose 8" Pliers - Designed to cut hard and soft wire. Griplock® Plier - Ergonomically designed offset head for greater
leverage. Jaw design accommodates many shapes.
PermaLock® fastener eliminates nut
and bolt failure. Channellock Blue®
comfort-grips.
Long nose design with cutting knives at hinge. Permits
wrapping, looping, and cutting with
single pliers. Serrated gripping
surfaces. Plastic dipped handle.
Product
No.
Mfg.
No.
Description
391301-C
KN26118SBA
8" Plier
Order
Mult.
Weight
1/0/6
.400
Unit
Cost
31.99 EA
PLIERS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333785-B
GL-10
Griplock Plier
1/5/20
.875
Unit
Cost
9.99 EA
PLI ERS
Anglo American
Knipex Linesman 9" pliers - Forged steel. Polished head. High
Channellock® Ignition Pliers - Tongue and groove midget size
leverage, eccentric joint eases cutting. Long cutting edges for
thicker cables. Designed to cut piano
wire and other solid wire. Additional
serrated round jaws for gripping small
workpieces. Cushion-grip handle.
Designed to meet the requirements of
linemen and others who use a pliers of this type.
4-1/2" long. 3 adjustments. 1/2" capacity. Channellock Blue®
dipped plastic grips.
Product
No.
Mfg.
No.
Description
391298-C
KN02029SBA
9" Lineman Plier
Order
Mult.
Weight
1/0/6
1.000
Unit
Cost
33.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325614-C
424
4-1/2" Tg/grv Pliers
1/5/20
.185
Unit
Cost
14.79 EA
PLI ERS
PLIERS
Anglo American
Channellock® Pliers - Tongue and groove, 10" long, 7 adjustments,
Knipex Diagonal Cutting 8" Pliers - Specially induction
2" capacity, Channellock Blue® dipped plastic
grips, smooth jaws.
hardened and perfectly mated cutting edges. Designed for effortless
cutting of piano, hard, and soft wire.
Product
No.
Mfg.
No.
Description
391328-C
KN74018SBA
8" Plier
Order
Mult.
Weight
1/0/6
.600
Unit
Cost
36.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325455-B
415
10" Smooth Tg/grv Pliers
1/5/20
1.025
Unit
Cost
14.99 EA
PLI ERS
PLIERS
Cooper Tools
Channellock® Pliers - Tongue and groove pliers with
Tongue And Groove Pliers - Drop-forged, precision machined
SAFE-T-STOP® feature prevents handles from touching in any
position. 9-1/2" length. 1-1/2" jaw
capacity. 5 adjustments. PermaLock®
pivot point fastener eliminates channel
jumping. Channellock Blue® dipped
plastic grip.
from quality steel. Hardened, tempered, polished. Self-locking jaw
opening adjustments. Handles have
plastisol grips. Carded.
Product
No.
Mfg.
No.
349849-C
349858-C
349867-C
339315-B
R27CV
R210CV
R212CV
R216CV
Description
Order
Mult.
Weight
7" long, 1-1/16" jaw capacity
10" long, 1-1/2" jaw capacity
12" long, 2-1/8" jaw capacity
16" long, 4-1/2" jaw capacity
1/6/72
1/6/36
1/6/18
1/3/18
.500
.938
1.750
2.850
Unit
Cost
9.99 EA
10.99 EA
12.99 EA
19.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
373311-C
421
9-1/2"safe Tg/grv Pliers
1/5/20
.930
Unit
Cost
16.79 EA
PLI ERS
Channellock® Pliers - Tongue and groove versatile combination
pliers. Powerful parallel jaw grip, tremendous leverage.
Channellock Blue® dipped plastic grips.
PLIERS
Groovelock™ Pliers - Groovelock™ pliers have a multigroove
ratcheting system that allows for precise positioning and
provides more groove positions than
stand groove joint pliers. The
ProTouch™ grip allows greater comfort
and less hand fatigue. All-purpose jaw
grips onto flat, round, hex, and square
work pieces. Quick adjusting
press-n-slide button quickly adjusts jaw.
Product
No.
Mfg.
No.
325400-C
325419-C
325437-C
2078108
2078110
2078112
10-68
Description
Order
Mult.
Weight
8"
10"
12"
1/5/25
1/5/25
1/5/20
.644
1.044
1.630
Product
No.
Mfg.
No.
325357-C
420
325366-C
426
302425-C
430
Unit
Cost
332884-C
440
24.99 EA
26.99 EA
32.99 EA
307046-C
460
378712-B
480
Description
9-1/2", 5 adjustable settings,
1-1/2" jaw capacity
6-1/2", 5 adjustable settings,
7/8" jaw capacity
10", 7 adjustable settings, 2"
jaw capacity
12", 7 adjustable settings,
2-1/4" jaw capacity
16", 8 adjustable settings,
4-1/4" jaw capacity
20", 12 adjustable settings,
5-1/4" jaw capacity
Order
Mult.
Weight
Unit
Cost
1/5/20
.885
14.79 EA
1/5/20
.405
12.49 EA
1/5/20
1.025
15.79 EA
1/5/20
1.385
16.79 EA
1/2/20
3.050
29.49 EA
1/2/10
3.906
52.99 EA
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
PLIERS
PLIER S
PLIERS
Product
No.
Mfg.
No.
Description
311656-B
TG-1D
Tg-1 Pliers Set
Order
Mult.
Weight
1/0/5
2.500
Unit
Cost
29.99 EA
PLIER S
Channellock® Pliers - Tongue and groove, 9-1/2", 4 adjustments,
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
318086-B
318108-B
420CB
430CB
9.5"
10"
1/5/20
1/5/20
.910
1.190
Unit
Cost
18.99 EA
19.99 EA
PLIERS
Channellock® Pliers Gift Set - Contains 1 each model No. 420C
9-1/2" Channellock® pliers and model No. 426C 6-1/2"
Channellock® pliers.
jaw capacity 1-1/8". Parrot nose shaped jaws for
plumbing, maintenance, and electrical
conduit work. Channellock Blue®
dipped plastic grips.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325428-C
410
9-1/2" Nut Tg/grv Pliers
1/5/20
1.083
PLIER S
Unit
Cost
16.79 EA Product
No.
314692-B
Channellock® Pliers - NUTBUSTER™ tongue and groove, 14", 4
adjustments, jaw capacity 2". Parrot nose shaped
jaws for plumbing, maintenance, and
electrical conduit work. Extra wide jaws
have the strength of a pipe wrench.
SAFE-T-STOP® design prevents
handles from touching to eliminate
pinched fingers. Channellock Blue®
dipped plastic grips.
Mfg.
No.
Description
GS-1
Gs-1 Pliers Set
Order
Mult.
Weight
1/0/5
1.280
Unit
Cost
25.99 SET
PLIERS
Slip-Joint Pliers - Thick nose pliers. Shear-type wire cutter. Precision
made of fine polished, high-carbon drop forged
steel. Patented PermaLock® fastener
eliminates nut and bolt failures.
Channellock Blue® dipped plastic grips.
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
300721-C
414
14" Nut Tg/grv Pliers
1/2/20
2.550
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
26.49 EA
333026-C
333687-B
526
528
6"
8"
1/5/20
1/5/20
.545
.635
Unit
Cost
8.49 EA
7.99 EA
PLIER S
PLIERS
Channellock® V-Jaw Pliers - Tongue and groove. Use for gripping
and turning of round objects. Channellock Blue® dipped
plastic grips.
Product
No.
Mfg.
No.
339261-C
422
339288-C
442
Description
9-1/2", 5 adjustable settings,
1-1/2" jaw capacity
12", 7 adjustable settings,
2-1/4" jaw capacity
Save time by letting us locate those
hard-to-find items for you!
Long Nose Pliers - Full polished steel finish. Blue dipped plastic
grips. Carded.
Order
Mult.
Weight
Unit
Cost
1/5/20
.885
Product
15.79 EA No.
1/5/20
1.385
16.79 EA
301655-C
333598-B
333623-B
Mfg.
No.
Description
Order
Mult.
Weight
317
318
318WS
7-1/2"
8"
8" with wire stripper
1/5/20
1/5/20
1/5/20
.530
.685
.685
Unit
Cost
21.49 EA
23.99 EA
28.99 EA
10-69
HAND TOOLS
Channellock® Pliers Gift Set - Contains 1 each of model No. 420 Code Blue™ Tongue And Groove Plier - Right angle teeth
9-1/2" Channellock® pliers and model No. 440 12"
grip in all directions for maximum bite and minimum wear. Patented
Channellock® pliers. Carded.
undercut tongue and groove design
assures no slip jaw action. Patented
reinforcing edge minimizes stress
breakage. Patented PermaLock®
fastener eliminates nut and bolt failures.
Laser-hardened teeth provide longer
life. Grips have a Santoprene™ core
with TPR-rubber overmold which
composites for durability, comfort, and
secure grip. New Code Blue™ designation on handles.
HAND TOOLS
PLIERS
PLIERS
PLI ERS
Long Nose 6" Pliers - Full polished steel finish. Blue dipped plastic Linemen’s Pliers - Specially hardened, perfectly mated cutting
grips. Carded.
Product
No.
Mfg.
No.
301639-C
326
edges. Full polished steel finish. Blue dipped plastic
handles. Carded.
Description
Order
Mult.
Weight
6" Long Nose Pliers
1/5/20
.385
Unit
Cost
19.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333632-B
385085-B
348
369
8"
9"
1/5/20
1/5/20
.985
1.195
Unit
Cost
23.99 EA
25.99 EA
PLI ERS
PLIERS
Code Blue™ Long Nose Cutting Plier - 8.5" heavy-duty
design. Cross-hatching on jaws grabs work tightly. Useful crushing area.
Precision made of fine polished,
high-carbon drop forged steel. Grips
have a Santoprene™ core with
TPR-rubber overmold which
composites for durability, comfort, and
secure grip. New Code Blue™
designation on handles makes it easier than ever to choose the right tool
for the job. Laser-hardened cutting edges provide longer life and greater
ease of cut.
7-3/4" Curved Plier With Box Joint - Curved diagonal for
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
317721-B
318CB
8.5" Lng Nose Ctng Plier
1/5/20
.685
Linemen’s Plier - 9". Stripping holes in the cutter for 12 AWG wire.
Crimper for both insulater and noninsulated
terminals and heat-treated to hold its
edge. Polished high-carbon drop forged
steel. Channellock Blue® comfort-grips.
Unit
Cost
29.99 EA
PLIERS
Diagonal Cutting 7" Pliers - Specially hardened, perfectly mated
maximum pulling leverage. Perfectly mated cutter, heat-treated to hold its
edge. Polished high-carbon drop forged
steel. Channellock Blue® comfort-grips.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333678-B
447
7-3/4" Curvd Joint Plier
1/5/20
.795
Unit
Cost
19.99 EA
PLI ERS
cutting edges. Blue dipped plastic grips. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333669-B
369CR
9" Linemen S Plier
1/5/20
1.180
Unit
Cost
29.99 EA
PLI ERS
Product
No.
Mfg.
No.
301698-C
337
Description
Order
Mult.
Weight
7" Diagonal Pliers
1/5/20
.605
Unit
Cost
18.99 EA
9" Ironworker’s Pliers - Polished high-carbon drop-forged steel
mated cutter. Heat-treated to hold its edge. Blue
comfort-grips. Carded.
PLIERS
Crimp And Cut Plier - Designed for crimping of both insulated and
noninsulated solderless connections and terminals on 10
to 22 AWG wire. Slim nose shape for
tight places. Precision made of fine
polished high-carbon drop-forged steel.
Perfectly mated cutters, scientifically
heat-treated to hold their edge.
Channellock Blue® comfort-grips. 9-1/2".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
378313-C
350S
9" Ironworker S Pliers
1/5/20
.925
Unit
Cost
29.99 EA
PLI ERS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333730-C
909
9.5" Crimp And Cut Plier
1/5/20
1.015
Unit
Cost
21.99 EA
PLIERS
9" Heavy-Duty Ironworker’s Pliers - Larger, stockier, beveled
nose. Drop forged high-carbon still construction. Mated cutter is laser
hardened to hold its edge. Channellock Blue®
comfort-grips.
Diagonal 6" Pliers - Specially hardened, perfectly mated cutting
edges. Full polished steel finish. Blue dipped plastic
grips. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301647-C
436
6" Diagonal Pliers
1/5/20
.445
10-70
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333641-B
351S
Iron Worker Plier
1/5/20
1.200
Unit
Cost
28.99 EA
Unit
Cost
18.99 EA
We can become your single-source supplier
on many of the products you currently use!
HAND TOOLS
PLIERS
PLIER S
PLIERS
End Cut Pliers - Specially hardened, perfectly mated cutting edges.
Electronic coating to prevent rusting.
Channellock Blue® comfort-grips.
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301671-C
333650-B
357
358
7"
8"
1/5/20
1/5/20
.780
.880
Cooper Tools
Slip-Joint Pliers - With wire cutter made from special steel,
drop-forged, machined and hardened to meet exacting
standards. Polished nickel
chrome-plated with cushion-grip
handle. Carded.
Unit
Cost
Product
No.
Mfg.
No.
Description
21.49 EA
22.99 EA
304654-C
304638-C
H26CVSML
H28CVSML
6"
8"
Order
Mult.
Weight
1/0/3
1/0/3
.462
.576
Unit
Cost
6.99 EA
7.99 EA
PLIERS
Code Blue™ End Cutter - 8" perfectly mated cutters, scientifically 8" Linemen’s Pliers - Specially designed joint, with rivet near the
heat-treated to hold their edge. Precision made of fine
polished, high-carbon drop forged steel.
New Code Blue™ designation on
handles makes it easier than ever to
use.
Product
No.
Mfg.
No.
317942-B
358CB
cutter gives maximum power in cutting heavy gauge
wire. Drop-forged steel with polished
head and dipped plastic handles.
Carded.
Description
Order
Mult.
Weight
8" End Cutter
1/5/20
.800
Unit
Cost
27.99 EA
PLIER S
Code Blue™ Cable Cutter - 9.5" heavy-duty design, precision
made of fine polished high-carbon drop forged steel. Carefully
balanced with broader handles for
better leverage and extra comfort.
Closely mated cutters are scientifically
heat-treated to hold their edge. Cuts up
to 4/0 aluminum and 2/0 soft copper.
Not designed for steel or ACSR cable.
Grips have a Santoprene™ core with
TPR-rubber overmold which composites for durability, comfort, and secure
grip. New Code Blue™ designation on handles.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
318590-B
911CB
9.5" Cable Cutter
1/5/20
.890
Unit
Cost
27.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
304514-C
21508CVN
8" Linemans Pliers
1/6/36
1.050
Unit
Cost
21.99 EA
PLIERS/ NPI PERS
Cooper Tools
Cutting Nipper - Strong, lightweight design for demanding
construction use. Develops high-leverage to cut large
diameter nails and wire. Drop-forged
from high-quality steel with heat-treated
and tempered handles and jaws.
Hardened and honed cutting edges.
Black finish with polished head.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344060-C
344052-C
GG010H
GG014
10", carded
14"
1/6/36
1/3/18
1.067
2.047
Unit
Cost
17.99 EA
21.99 EA
PLIERS/ NPI PERS
Cooper Tools
Side Cutting Pliers - An ideal tool for electrical work. Hand honed,
electronically hardened edges. Polished head, yellow
cushion-grip handles. Carded.
PLIER S
Cooper Tools
6" Pliers - Forged from special analysis steel, carefully machined,
hardened and oil tempered. Full polish
finish.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303567-C
50-8CVN
8"
1/6/48
.875
Unit
Cost
19.99 EA
PLIERS/ NPI PERS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325071-C
H26V
6" Slip Joint Pliers
1/3/36
.375
Unit
Cost
5.99 EA
PLIER S
Cooper Tools
Slip-Joint Pliers - Cee Tee Co. combination. Drop-forged and
tempered. Full polish finish. Milled gripping teeth. Wire
cutter. Knurled handles. 8". Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
316067-C
H28V
8" Slip Joint Pliers
1/3/36
.514
The product representations in this catalog are for reference only,
and are subject to change without notice.
Code Blue™ Linemen’s Plier - High-leverage design.
Laser-hardened cutting edges provide longer life and greater ease-of-cut.
Polished high-carbon drop forged steel.
Useful crushing area. Grips have a
Santoprene™ core with TPR-rubber
overmold which composites for
durability, comfort, and secure grip. new
Code Blue™ designation on handles.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
318027-B
318078-B
369CB
369CRCB
9"
9"
1/5/20
1/5/20
1.060
1.060
Unit
Cost
29.99 EA
34.79 EA
Unit
Cost
7.99 EA
10-71
HAND TOOLS
Cooper Tools
PLIER S
HAND TOOLS
PLIERS/NIPPERS
PLIERS/ NI P ERS
PLI ERS/ NPI ERS
Cooper Tools
Klein Tools
Diagonal Pliers - Heavy-duty high-leverage. One of the most powerful Side Cutting Pliers - Smooth, streamlined nose with knurled jaws.
diagonal cutting pliers. Smooth working joint.
Full fashioned handles. Polished head,
yellow cushion-grip handles. Carded.
Special groove at the hinge allows for secure gripping
and pulling of flat fish tapes.
High-leverage design provides greater
gripping and cutting power.
Plastic-dipped handles. 9-1/4". Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303576-C
542-7CVN
7" Diagonal Cut Pliers
1/6/72
.542
Unit
Cost
Product
No.
Mfg.
No.
Description
317705-B
D213-9NETP
9-1/4" Lineman Pliers
15.99 EA
Order
Mult.
Weight
1/0/6
1.200
Unit
Cost
33.99 EA
PLI ERS/ NPI ERS
Klein Tools
PLIERS/ NI P ERS
Cooper Tools
4" Midget Diagonal Pliers - Semi-flush electronically hardened
edges. Cushion-grips. Polished head. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
306252-C
MS54V
4" Diagonal Cut Pliers
1/6/72
.073
Unit
Cost
17.99 EA
PLIERS/ NI P ERS
Cooper Tools
Diagonal Pliers - Semi-flush electronically hardened edges. Yellow
cushion- grips. Polished head. Carded. 6".
Side Cutting Pliers - High-leverage design for easier cutting of soft
annealed tie wire used with rebar. Great cutting
and gripping power. Knurled jaws and
coil spring. Hook bend in 1 handle for
nonslip grip. Plastic-dipped handles.
9-9/32". Carded.
Product
No.
Mfg.
No.
Description
317713-B
D213-9ST
9" Side Cut Pliers
Order
Mult.
Weight
1/0/6
1.208
Unit
Cost
34.99 EA
PLI ERS/ NPI ERS
Klein Tools
Side Cutting Pliers With Crimping Die - Smooth, streamlined
nose with knurled jaws. High-leverage design provides greater cutting and
gripping power. Crimping die built-in.
Yellow plastic-dipped handles, 9".
Product
No.
Mfg.
No.
Description
345806-B
D213-9NECR
9" Line Pliers
Order
Mult.
Weight
1/0/6
1.170
Unit
Cost
39.99 EA
PLI ERS/ NPI ERS
Product
No.
Mfg.
No.
350006-C
9336CVN
Description
Order
Mult.
Weight
6" Diagonal Cut Pliers
1/6/72
.417
Unit
Cost
12.99 CD
PLIERS/ NI P ERS
Klein Tools
Side Cutting Pliers - Smooth, streamlined nose with knurled jaws.
High- leverage design provides greater cutting and
gripping power. Blue plastic-dipped
handles. 9".
Product
No.
Mfg.
No.
Description
311235-B
D213-9NE
9" Side Cut Pliers
Order
Mult.
Weight
1/0/6
1.130
PLIERS/ NI P ERS
Klein Tools
Long Nose Pliers - Standard duty, long nose design with cutting
knives at hinge. Permits wrapping, looping, and
cutting with a single pliers.
Plastic-dipped handles. Carded.
Unit
Cost
29.99 EA Product
No.
Klein Tools
317772-B
317780-B
Side Cutting Pliers - Smooth, streamlined nose with knurled jaws.
Mfg.
No.
Description
317675-B
D2000-9NE
9" Side Cut Pliers
10-72
Description
D203-6
D203-7
6-5/8"
7-1/8"
Order
Mult.
Weight
1/0/6
1/0/6
.346
.366
Unit
Cost
21.49 EA
21.99 EA
PLI ERS/ NPI ERS
Features ultra-durable Klein 2000 Series cutting
knives for ACSR, bolts, nails, and most
hardened wire. High-leverage design
provides greater cutting and gripping
power. Blue plastic-dipped handles. 9".
Carded.
Product
No.
Mfg.
No.
Klein Tools
Midget Long Nose Pliers - Slim nose design for precision
assembly work. Smooth inside jaws and radiused jaw edges to prevent
nicking wire. Coil spring opens jaw.
Plastic-dipped handles. 4-3/4". Carded.
Order
Mult.
Weight
1/0/6
1.225
Unit
Cost
39.99 EA
Product
No.
Mfg.
No.
Description
317799-B
D322-41/2C
4-3/4" Long Nose Pliers
Order
Mult.
Weight
1/0/6
.192
Unit
Cost
21.49 EA
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
PLIERS/NIPPERS
PLIER SN/ I P ERS
PLIERS/ NPI PERS
Klein Tools
Klein Tools
Long Nose Pliers - 8". Heavy-duty. Side cutters with skinning hole for Long Nose Pliers - 5" standard long nose pliers - side cutting with
No. 12 B&S insulated wire. Yellow
plastic-dipped handles.
Product
No.
Mfg.
No.
Description
311197-B
D203-8N
8" Long Nose Pliers
spring - are induction hardened, long-lasting
cutting knives with knurled jaws for sure
wrapping and looping and the curved handles
provide greater tool control. They also feature
spring-loaded action for self-opening.
Order
Mult.
Weight
1/0/6
.630
Unit
Cost
Product
28.49 EA No.
331402-B
PLIER SN/ I P ERS
Klein Tools
Mfg.
No.
Description
D203-5C
Long Nose Pliers
Order
Mult.
Weight
1/0/6
.300
Unit
Cost
21.99 EA
PLIERS/ NPI PERS
Product
No.
Mfg.
No.
Description
311189-B
D228-8
8" Diagonal Cut Pliers
Order
Mult.
Weight
1/0/6
.600
Crimping Tool - 9-3/4" long. Thin nose permits work in confined
Unit
Cost
space. Crimping die marked for insulated and
noninsulated solderless terminals and
connectors. Accommodates wire from
No. 10 to 22 AWG. Wire cutter in nose.
Red plastic-dipped handles.
Product
23.99 EA No.
311170-B
PLIER SN/ I P ERS
Klein Tools
Mfg.
No.
Description
1005
Crimping Tool
Order
Mult.
Weight
1/0/6
.800
Unit
Cost
27.99 EA
PLIERS/ NPI PERS
Diagonal Cut Pliers - High-leverage, heavy-duty with head angled
for easier work in confined areas. Standard bevel
cutting knives. Plastic-dipped handles.
Length 8". Carded.
Product
No.
Mfg.
No.
Description
317748-B
D248-8
8" Diagonal Cut Pliers
Order
Mult.
Weight
1/0/6
.722
Unit
Cost
Klein Tools
Cable Cutter - 9-1/2" long. High-leverage design. Cable-gripping,
shear-type jaws cut up to 4/0 aluminum, up to
2/0 soft copper, up to 100 pair 24-gauge
communication cable. Ideal for working
in confined spaces. Tough, comfortable,
red plastic-dipped handles. Not
designed for cutting steel or ACSR.
Product
24.99 EA No.
311162-B
PLIER SN/ I P ERS
Klein Tools
Mfg.
No.
Description
Order
Mult.
Weight
63050
Cable Cutter
1/0/6
.930
Unit
Cost
28.99 EA
PLIERS/ NPI PERS
Heavy-Duty Diagonal Cut Pliers - Heavier design for all-purpose
Klein Tools
use. Tapered nose and standard-bevel cutting knives. Plastic-dipped
handles. Length 6". Carded.
Wire Stripper - 6" long. Compact, lightweight strippers gauge, cut,
Product
No.
Mfg.
No.
Description
317756-B
D252-6
6" Diagonal Cut Pliers
Order
Mult.
Weight
1/0/6
.367
strip, and loop wire. Spring-loaded, self-opening
action. Flat design, narrow nose. Strong, hardened
steel with precision-ground stripping holes. Clear
gauge markings on both sides. Black oxide finish.
Plastic-dipped handles.
Unit
Cost
25.49 EA
PLIER SN/ I P ERS
Klein Tools
Midget Diagonal Cut Pliers - Small, tapered nose design allows
flush cutting in close quarters. Fully polished head and neck.
Coil spring opens jaws after action.
Plastic dipped handles. Length 4-3/16".
Carded.
Product
No.
Mfg.
No.
Description
317764-B
D295-4C
4" Diagonal Cut Pliers
Some products shown may need to be special ordered
for your convenience!
Order
Mult.
Weight
1/0/6
.167
Product
No.
Mfg.
No.
311154-B
11045
317845-B
11046
Description
Yellow handle, strips No. 10,
12, 14, 16, 18 solid wire
Red handle, strips No. 16,
18, 20, 22, 24, 26 stranded
wire
Order
Mult.
Weight
Unit
Cost
1/0/12
.290
12.99 EA
1/0/12
.292
13.49 EA
Unit
Cost
31.49 EA
10-73
HAND TOOLS
Klein Tools
Diagonal Cut Pliers - High-leverage design provides greater
mechanical cutting and gripping. Heavy-duty. Standard bevel
cutting knives. Plastic-dipped handles.
Carded. 8" hand formed handle style.
HAND TOOLS
PLIERS/NIPPERS
PLIERS/ NI P ERS
PLI ERS/ NPI ERS
Klein Tools
Klein Tools
Wire Cutter And Stripper - Fast and easy way to cut and strip
Long Nose All-Purpose Crimper And Cutter - Handles wide
Romex™ cable. Cleanly removes outer jacket of type NM-B
nonmetallic sheathed cable. Strips,
cuts, and loops conductor wire. Carded.
range of sizes and functions: Wire cutting, bolt cutting, wire stripping, and
crimping including 7 to 8mm ignition
terminals. Cutters and strippers are
located in nose to reach in tight places.
Crimping dies for insulated and
noninsulated connectors from 10 to
22-gauge and cutters for 4-40, 5-40, 6-32, 8-32, 10-32, and 10-24 bolts.
Narrow, serrated pliers jaws. Plastic covered handles. Overall length 8-1/
4".
Product
No.
Mfg.
No.
Description
385115-B
385123-B
1012
1014
12-gauge wire
14-gauge wire
Order
Mult.
Weight
1/0/6
1/0/6
.250
.250
Unit
Cost
17.99 EA
17.99 EA
WIRESTR IP ER S
Klein Tools
Product
No.
Mfg.
No.
Description
317853-B
1010
Long Nose Crimping Tool
Wire Stripper - Klein-Kurve™ wire stripper/cutter cuts both stranded
and solid wire. 7-1/8" long with blue and yellow handles.
Shears 6-32 and 8-32 screws, strips AWG solid wire gauges
10 to 18, and strips AWG stranded wire gauges 12 to 20.
Spring-loaded, self-opening action. Narrow nose. Strong,
hardened steel with precision-ground stripping holes. Clear
gauge markings on both sides. Black oxide finish. Plastic
double-dipped handles.
Product
No.
Mfg.
No.
Description
335886-B
11055
Wire Cutter/stripper
Order
Mult.
Weight
1/0/6
.433
Order
Mult.
Weight
1/0/6
.518
Unit
Cost
19.99 EA
PLI ERS/ NPI ERS
Klein Tools
All-Purpose Electrician Crimper And Cutter - Cuts and
strips wire, crimps terminals, and shears bolts, also lugs and splices.
Combination crimping dies may be
used on insulated and noninsulated
solderless terminals. 1 wire cutter at tip
and 1 wire cutter located in near the
stripping holes. Bolt shears cut 4-40,
6-32, 8-32, 10-24, and 10-32 bolts.
Strips No. 8 to 18 AWG solid wire or 10 to 22 AWG stranded wire. Pivot nut
to adjust tension. Left and right-hand wire-looping holes near tip. Black
oxide finish with etched markings. Plastic cushion-grip handles for comfort.
Unit
Cost
Product
No.
Mfg.
No.
Description
317861-B
1001
Electricn Crimper/cutter
19.99 EA
PLIERS/ NI P ERS
Order
Mult.
Weight
1/0/6
.545
Unit
Cost
24.49 EA
PLI ERS/ NPI ERS
Klein Tools
Klein Tools
Dual Wire Cutter And Stripper - Fast and easy way to cut and
6-In-1 Multipurpose Crimper And Cutter - Cuts and strips
strip Romex™ cable. Cleanly removes outer jacket of type NM-B
nonmetallic sheathed cable. Strips,
cuts, and loops 12 AWG and 14 AWG
solid wire. Shears 6-32 and 8-32
screws. Carded.
wire, crimps terminals, and shears bolts, also lugs and splices.
Combination crimping dies may be
used on insulated solderless terminals.
1 wire cutter at tip and 1 wire cutter
located in near the stripping holes. Bolt
shears cut 4-40, 5-40, 6-32, 8-32,
10-24, and 10-32 bolts. Strips No. 10 to
22 AWG stranded wire. Black oxide finish with etched markings. Plastic
cushion-grip handles for comfort.
Product
No.
Mfg.
No.
Description
333956-B
1412
Dual Cable Stripper
Order
Mult.
Weight
1/0/6
.075
Unit
Cost
23.99 EA
PLIERS/ NI P ERS
Klein Tools
Product
No.
Mfg.
No.
Description
317888-B
1000
Wire Cutter/crimper
Dial Wire Stripper - 5-1/8" long. Dial wire size for stripping without
damaging wire. Also cuts. Compact size gets into
tight areas. Stripper dial adjusts from 24
to 12-gauge wire. Spring-loaded design
opens automatically. Black oxide finish
with plastic-dipped handles.
Product
No.
Mfg.
No.
Description
317837-B
74007
Dial Wire Stripper
10-74
Order
Mult.
Weight
1/0/6
.550
Unit
Cost
21.99 EA
PLI ERS/ NPI ERS
Coax Cable Cutter - Cut, strip, and crimp RG-6 and RG-59 coax
cable with 1 tool. Easy 3 step instructions printed on
tool. Long, curved cutter requires less effort to
cut wire and insulation. tough steel construction.
Channellock Blue® air pocket comfort-grips.
Black oxide finish resists rust and corrosion. 4
free coax connectors included with each tool purchase.
Order
Mult.
Weight
1/0/6
.192
Unit
Cost
9.49 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333758-B
919
Coax Cable Cutter
1/5/20
.625
Unit
Cost
21.99 EA
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
PLIERS/NIPPERS
PLIER SN/ I P ERS
PLIERS/ NPI PERS
Wire Stripper - Designed to cut copper wire only. Strips AWG solid
Snap Ring Pliers - Carbon-steel pliers with corrosion resistant black
wire sizes: 10, 12, 14, 16, and 18. Strips AWG
stranded wire sizes: 12, 14, 16, 18, and
20. Precision holes for wire stripping.
Lean plier nose pulls and loops wire.
Scissor-type blades are precision
ground and heat-treated to hold their
edge. Highly visible AWG solid and
AWG stranded wire gauge sizes
painted and embossed in the metal. Channellock Blue® comfort-grips.
oxide finish. Quickly converts for use with either internal or
external rings by a simple finger adjustment of 2 sliders. For
external rings 1/2" to 2" and internal rings 3/8" to 2".
Includes 5 pairs of color-coded tips: .038 black-straight and
90° bend; .047 silver-straight and 90° bend; .070
gold-straight. Blue dipped plastic grips.
Mfg.
No.
Description
Order
Mult.
Weight
333767-B
957
Wire Stripper
1/5/20
.410
Unit
Cost
15.99 EA
PLIER SN/ I P ERS
Klein Tools
Conduit Screwdriver - For use with conduit fittings and reaming.
Hooded blade (slotted) keeps bit tip from slipping out
of screws. Also reams and smooths
both inside and outside of 1/2", 3/4",
and 1" thin wall conduit. Cushion-grip
handle helps resist slippage. Handle tip
is inscribed with tip description symbol. Tip width 3/8", shank length 3",
overall length 7-3/8". Carded.
Product
No.
Mfg.
No.
Description
317896-C
85191
Conduit Screwdriver
Order
Mult.
Weight
1/0/6
.483
Unit
Cost
31.99 EA
PLIER SN/ I P ERS
Klein Tools
Snap Ring Pliers - Carbon-steel pliers with corrosion resistant blade
oxide finish. Field style offers fixed tips
without cushion-grips or springs for
maximum economy. Individually boxed.
Product
No.
Mfg.
No.
Description
329380-C
329399-C
73236
73241
For internal rings
For external rings
Order
Mult.
Weight
1/0/6
1/0/6
.125
.167
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
345016-C
907
Snap Ring Pliers
1/5/20
.585
Snap Ring Plier - 8" conversion snap ring plier takes place of 12
individual pliers. Capacity 1/8" to 2" external 1/4"
to 2" internal. Longer, narrow nose for confined
areas. Simple conversion between internal and
external operations. Heavy-duty return spring.
Heat-treated for longer life. Sealed air pocket
Channellock Blue® comfort-grips.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333749-B
917
8" Snap Ring Plier
1/5/20
.725
PLIERS/ NPI PERS
Pliers-Fence Tool - Cushion-grip handles. Flat nose with 3 wire
cutters, pipe grip and teeth in tip of nose. For
construction and maintenance of wire
fencing.
Unit
Cost
11.99 EA Product
11.99 EA No.
326025-D
Mfg.
No.
1000-10
Snap Ring Pliers - Carbon-steel pliers with corrosion-resistant finish.
Deluxe style pliers are spring-loaded and include
cushion-grip handles for improved comfort and
control.
Description
329406-C
329754-C
309346-C
309354-C
73237
73242
73239
73244
For internal rings
For external rings
For internal rings, 90° tips
For external rings, 90° tips
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
Unit
Cost
28.99 EA
Cooper Tools
Klein Tools
Mfg.
No.
27.99 EA
PLIERS/ NPI PERS
PLIER SN/ I P ERS
Product
No.
Unit
Cost
Description
10", 1-1/2" nose (tip to
throat, not to rivet) , 1-9/16"
base nose width, 5/8"
maximum thickness
Order
Mult.
Weight
1/6/36
1.292
Unit
Cost
24.99 EA
WREN CHES/ PLIERS
Cooper Tools
10" Fence Tool - For use on metal or wood posts. Heavy lock-joint
construction with oval faced jaws. Starting and pulling point
is on 1 jaw, corrugated hammer head on the other. Good
staple puller and lug lifter, wire stretcher in back of joint. Wire
cutter on each side will cut double strand barbed wire. Highly
polished head with gun metal handles, knurled grip, orange
dipped plastic handles.
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
1/0/6
.208
.229
.200
.200
Unit
Cost
13.49 EA
13.49 EA
13.79 EA Product
13.79 EA No.
354878-C
Mfg.
No.
Description
Order
Mult.
Weight
193410CVN
10" Fence Tool
1/6/36
1.500
Unit
Cost
19.99 EA
10-75
HAND TOOLS
Product
No.
HAND TOOLS
WRENCHES/PLIERS
WREN CHES/ PLIERS
WRENC HES/P LIERS
10-1/2" Fence Tool - For use on metal or wood posts. Hammer head MaxGrip Adjustable Wrench - Use for plumbing, auto, or home
is on 1 jaw, corrugated starting and pulling point on the
other. Heavy lock-joint construction with oval faced jaws.
Ideal for staple pulling and lug lifting, and wire stretching.
Wire cutter on each side will cut double strand barbed wire.
Highly polished head, knurled grip, blue plastic handles.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
397857-C
85
10-1/2" Fence Pliers
1/5/20
1.580
use. Precision machined face with etched measurement scale in
English and metric. Strong chrome
vanadium steel exceeds ANSI
specifications. Nonslip bi-material
cushion-grip. Rust-resistant phosphate
coating. Handy hang/storage hole in
handle.
Unit
Cost
Product
No.
Mfg.
No.
Description
317543-C
317578-C
317810-C
317829-C
87-791
87-792
87-793
87-794
6", 3/4" jaw capacity
8", 15/16" jaw capacity
10", 1-1/8" jaw capacity
12", 1-1/4" jaw capacity
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
1/0/4
.275
.583
1.033
1.713
Unit
Cost
11.99 EA
15.99 EA
21.49 EA
28.99 EA
WRENC HES/P LIERS
24.99 EA
Vise-Grip® Locking Wrench - Using proven Vise-Grip®
WREN CHES/ PLIERS
Cooper Tools
Adjustable Wrenches - Chromium plated finish. Crestoloy steel.
Special alloy used only by Crescent Tool Company. Accurate
machining and smoothly working parts. Wide handle
reduces hand fatigue while making the wrench more
comfortable to use. Extra wide jaw capacity. Carded.
technology, this tool locks on 3 sides of a hex head fastener.
Tremendous force can be applied
without damaging or slipping off the
fastener. Helps eliminate rounding of
head caused by slippage. Locking
wrench adjusts to a range of standard
and metric wrench sizes. Wrench has
wire cutter and knurled jaw tips. Carded.
Product
No.
Mfg.
No.
300977-C
4-LW
301019-C
7-LW
301027-C
10-LW
Description
4", adjusts from 1/4" (7mm)
to 9/16" (14mm)
7", adjusts from 7/16"
(11mm) to 3/4" (19mm)
10", adjusts from 5/8"
(16mm) to 1-1/8" (28mm)
Order
Mult.
Weight
Unit
Cost
1/0/5
.312
16.49 EA
1/0/5
.872
18.99 EA
1/0/5
1.356
22.99 EA
WRENC HES/P LIERS
Product
No.
Mfg.
No.
330715-C
330724-C
330733-C
330742-C
330751-C
330760-C
AC14V
AC16V
AC18V
AC110V
AC112V
AC115
330779-C
AC118
305976-C
AC124
Description
1/2" jaw capacity
15/16" jaw capacity
1-1/8" jaw capacity
1-5/16" jaw capacity
1-1/2" jaw capacity
1-11/16" jaw capacity,
tapered handle
2-1/16" jaw capacity, tapered
handle
2-7/16" jaw capacity, tapered
handle
Order
Mult.
Unit
Cost
Weight
1/6/72
1/6/72
1/6/72
1/6/36
1/6/18
1/0/18
.167
.292
.542
.958
1.667
3.200
14.79 EA
15.99 EA
15.49 EA
21.49 EA
31.49 EA
57.99 EA
1/0/12
5.250
109.99 EA
1/0/6
8.500
174.99 EA
Vise-Grip® Pliers - Curved jaws, without wire cutter. 1 per box.
WREN CHES/ PLIERS
Adjustable Wrench - Wider ergonomic handle for comfortable grip.
Measurement scales (in. on front, mm on reverse) are
handy for sizing nuts, pipe, and tube
diameters. Parallel jaw surfaces grip
safely and reduces possibility of
damage. Chrome vanadium steel
construction.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333696-B
333703-B
333712-B
333721-B
806G
808G
810G
812G
6"
8"
10"
12"
1/5/20
1/5/20
1/5/20
1/5/20
.345
.690
1.050
1.645
10-76
Product
No.
Mfg.
No.
331554-C
7CR-3
331563-C
10CR-3
Description
7" long, 1/4" jaw thickness,
1-5/8" jaw adjustment
10" long, 3/8" jaw thickness,
1-7/8" jaw adjustment
Order
Mult.
Weight
Unit
Cost
1/0/5
.870
16.49 EA
1/0/5
1.295
17.49 EA
Unit
Cost
14.99 EA
17.99 EA
21.99 EA
29.99 EA
Your representative can give you details
on product availability and shipping requirements!
HAND TOOLS
WRENCHES/PLIERS
WR ENCHES/ PLIER S
WREN CHES/ PLIERS
Vise-Grip® Pliers - Curved jaws, with wire cutter. 1 per box.
Vise-Grip® Pliers with Soft Grip - Curved jaws, with wire cutter.
No-slip rubberized soft grip to reduce vibrations and hand fatigue
while increasing comfort and leverage.
Greasy, oily hands won’t slip.
Mfg.
No.
301442-C
4WR-3
309650-C
5WR-3
331572-C
7WR-3
331581-C
10WR-3
Description
4" long, 1/4" jaw thickness,
15/16" jaw adjustment
5" long, 1/4" jaw thickness,
1-1/4" jaw adjustment
7" long, 1/4" jaw thickness,
1-5/8" jaw adjustment
10" long, 3/8" jaw thickness,
1-7/8" jaw adjustment
Order
Mult.
Weight
1/0/5
.274
1/0/5
.428
1/0/5
.860
1/0/5
1.298
Unit
Cost
13.99 EA
Product
15.49 EA No.
351997-B
16.99 EA
352012-B
17.99 EA
352020-C
Mfg.
No.
09SG
07SG
05SG
WR ENCHES/ PLIER S
Description
5" long, 1/4" jaw thickness,
1-1/4" jaw adjustment
7" long, 1/4" jaw thickness,
1-5/8" jaw adjustment
10" long, 3/8" jaw thickness,
1-7/8" jaw adjustment
Order
Mult.
Weight
Unit
Cost
1/5/25
.089
15.99 EA
1/5/25
.172
17.99 EA
1/5/25
.275
19.99 EA
WREN CHES/ PLIERS
Vise-Grip® Long Nose Pliers - With wire cutter.
Product
No.
Mfg.
No.
301434-C
4LN-3
309286-C
6LN-3
309801-C
9LN-3
Description
4" long, 1/4" jaw thickness,
1-3/4" jaw adjustment
6" long, 1/4" jaw thickness,
2-1/2" jaw adjustment
9" long, 13/32" jaw
thickness, 3" jaw adjustment
Fast Release™ Curved Jaw Locking Pliers - Fast Release™
Order
Mult.
Weight
Unit
Cost
1/0/5
.278
16.79 EA
1/0/5
.470
17.99 EA
1/0/5
.933
21.49 EA
is 2 times easier to open, has a no-pinch release, and offers more finger
room. Curved jaw puts tremendous
pressure on 4-points of any style nut or
bolt head. The no-slip ProTouch™ grip
provides comfort and leverage while
reducing vibrations and hand fatigue.
Ideal for tightening, clamping, twisting,
and turning. Turn screw to adjust
pressure. Stays adjusted for repetitive use. Constructed of high-grade
heat-treated alloy steel for maximum toughness and durability. Hardened
teeth are designed to grip from any angle.
WR ENCHES/ PLIER S
Product
No.
Mfg.
No.
Description
318655-C
318663-D
318760-C
09T
07T
05T
5"
7"
10"
Vise-Grip® Pliers - Straight jaws, without wire cutter. 1 per box.
Order
Mult.
Weight
1/0/5
1/0/5
1/0/5
.420
.800
1.340
Unit
Cost
17.99 EA
21.99 EA
21.99 EA
WREN CHES/ PLIERS
Product
No.
Mfg.
No.
331536-C
7R-3
331545-C
10R-3
Description
7" long, 7/16" jaw thickness,
1-1/8" jaw adjustment
10" long, 5/8" jaw thickness,
1-1/4" jaw adjustment
Unit
Cost
Fast Release™ Long Nose Locking Pliers - Fast Release™
is 2 times easier to open, has a no-pinch release, and offers more finger
room. Long, straight nose provides
easy access in narrow, hard-to-reach
places. Ideal for precision work and
hobbies. The no-slip ProTouch™ grip
provides comfort and leverage while
reducing vibrations and hand fatigue.
Ideal for tightening, clamping, twisting, and turning. Turn screw to adjust
pressure and fit work. Stays adjusted for repetitive use. Constructed of
high-grade heat-treated alloy steel for maximum toughness and durability.
Hardened teeth are designed to grip from any angle.
Order
Mult.
Weight
1/0/5
.895
15.79 EA
1/0/5
1.360
16.49 EA Product
No.
318698-C
WR ENCHES/ PLIER S
Mfg.
No.
Description
14T
6" Long Nose Lckng Plier
Order
Mult.
Weight
1/0/5
.440
Unit
Cost
21.99 EA
Vise-Grip® Long Nose Pliers with Soft Grip - 6" long, 1/4"
jaw thickness, 2-1/2" jaw adjustment with wire cutter. No-slip rubberized
soft grip to reduce vibrations and hand fatigue
while increasing comfort and leverage. Greasy,
oily hands won’t slip.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
351989-B
14SG
6" Vise Grip Pliers
1/5/25
.093
Service is our priority!
Our commitment is to meet your needs!
Unit
Cost
18.99 EA
10-77
HAND TOOLS
Product
No.
HAND TOOLS
WRENCHES/PLIERS
WREN CHES/ PLIERS
WRENC HES/P LIERS
Fast Release™ Locking Pliers Set - Fast Release™ is 2 times
easier to open, has a no-pinch release, and offers more finger room.
The no-slip ProTouch™ grip provides comfort and
leverage while reducing vibrations and hand fatigue.
Ideal for tightening, clamping, twisting, and turning.
Turn screw to adjust pressure and fit work. Stays
adjusted for repetitive use. Constructed of high-grade
alloy steel for maximum toughness and durability.
hardened teeth are designed to grip from any angle.
Vise-Grip® Large Jaw Locking Pliers - Heavy-duty curved jaw
grips around work of all shapes. Locks on, will not slip. Works as a pipe
wrench, adjustable wrench, clamp or
tongue-and-groove pliers. Ideal for use
by plumbers, mechanics, and welders.
High-grade steel construction. 12" long,
3-1/8" jaw opening. Carded.
Product
No.
Mfg.
No.
Description
366684-C
12LC-3
12" Vise Grip Pliers
Order
Mult.
Weight
1/0/5
1.522
Unit
Cost
27.99 EA
CLA MPS/ VSI ES
Vise-Grip® C-Clamp With Swivel Pads - Self-leveling swivel
Product
No.
Mfg.
No.
Description
318728-C
77T
Locking Pliers Set
Order
Mult.
Weight
1/0/5
1.620
Unit
Cost
39.99 EA
pads protect your work. Easy locking and release action. Made of special
alloy steel, hardened and tempered.
Bright finish.
WREN CHES/ PLIERS
Vise-Grip® Sheet Metal Tool - Locks with tremendous grip,
eliminating tiresome hand gripping. Material can’t slip, giving
smoother, more accurate bending and seaming
job. Adjusts to nonlocking pliers action by simply
tightening end screw. 8" long. 3-1/8" jaw width.
1-3/4" throat depth.
Product
No.
Mfg.
No.
314951-C
4SP
300128-C
305672-C
6SP
11SP
300136-C
18SP
Description
4" long, 1-7/8" jaw
adjustment
6" long, 2" jaw adjustment
11" long, 3-3/4" jaw
adjustment
18" long, 7" jaw adjustment
Order
Mult.
Weight
Unit
Cost
1/0/5
.520
15.99 EA
1/0/5
1/0/5
.640
1.752
18.79 EA
29.99 EA
1/0/5
2.800
42.99 EA
CLA MPS/ VSI ES
Vise-Grip® C-Clamp - Adjusts to proper opening by means of end
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
331625-C
8R
8" Sheet Metal Tool
1/0/25
1.167
Unit
Cost
23.99 EA
screw and locks onto work by squeeze of hand. Permits
user to hold work with 1 hand and apply clamp with
other. Small jaw area at contact point ideal for close
quarters. Easy release lever in handle. Made of
special alloy steel, hardened and tempered. Bright
finish. 1 in box.
WREN CHES/ PLIERS
Vise-Grip® Welding Clamp - Locks parts in perfect alignment.
Only welding clamp with toggle action and positive lock. Special
deep throated U-shaped jaws provide
perfect visibility and working space for
welding operation. Easy release lever in
handle. Made of fine alloy steel. 9" long.
2-3/4" jaw width. 1-5/8" jaw adjustment.
1 in a box.
Product
No.
Mfg.
No.
331616-C
9R
10-78
Description
Order
Mult.
Weight
9" Welders Clamp
1/0/25
.150
Unit
Cost
Product
No.
Mfg.
No.
329013-C
6R
331607-C
11R
306053-C
18R
Description
6" long, 1-3/4" jaw
adjustment
11" long, 3-3/4" jaw
adjustment
18" long, 7" jaw adjustment
Order
Mult.
Weight
1/0/5
.583
16.79 EA
Unit
Cost
1/0/5
1.750
27.99 EA
1/0/5
2.800
41.49 EA
31.49 EA
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
CLAMPS/VISES
CLAMPS /VI SES
CLAMPS/ VSI E S
Quick-Grip® Bar Clamp - Quick change. High-carbon, heat-treated Micro Quick-Grip® Bar Clamp And Spreader - Small size of
Product
No.
Mfg.
No.
Description
396109-B
396117-B
332550-B
332569-B
332577-B
506QC
512QC
518QC
524QC
536QC
6"
12"
18"
24"
36"
the popular Quick-Grip® bar clamp line (smaller than mini Quick-Grip®).
High-carbon, heat-treated steel bar.
Soft, durable pads protect delicate
work. Easily converts from clamp to
spreader. Small size makes tool ideal
for tight spaces, crafts, and small
projects. Jaw opening: 4-1/2".
Order
Mult.
Weight
1/0/5
1/0/5
1/0/5
1/0/5
1/0/2
1.960
2.260
2.800
3.200
4.000
Unit
Cost
19.99 EA
22.99 EA
24.99 EA
26.99 EA
29.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
374458-C
53006
Micro Bar Clamp
1/0/10
.220
Unit
Cost
9.99 EA
CLAMPS/ VSI E S
XP Quick-Grip® Bar Clamp - Patented Power Locks™ hold more
pressure, longer. Provides 500 lb. of 1-handed force (900 lb. of
2-handed force.) I-beam bar resists
twisting and bowing, allowing maximum
Quick-Grip® Handi-Clamp™ Curved Bar Clamp - Durable force to be applied. Quick-Release™
trigger for nonexplosive pressure
resin construction. Nonmarring swivel pads. Jaws designed to reach
release. Quick-Change™ jaw converts
around odd shapes. 1-handed operation and simple
quickly into a spreader. 3" throat depth
squeeze controls pressure. Quick release trigger.
accommodates larger workpieces.
Nonslip handles. Clamp for gluing, nailing, drilling,
Nonmarring pads grip securely and
and other uses. Full case quantities packed in
protect workpiece finish.
display merchandiser. 1 clamp per pack.
CLAMPS /VI SES
Product
No.
Mfg.
No.
342300-D
394599-D
342165-C
59100CD
59200CD
59400CD
Description
Order
Mult.
Weight
1-1/2"
2"
4"
1/0/20
1/0/12
1/0/10
.188
.534
.730
Product
No.
Mfg.
No.
Description
339217-B
339226-B
339235-B
339244-B
339262-B
339271-B
2021406
2021412
2021418
2021424
2021436
2021450
6"
12"
18"
24"
36"
50"
Unit
Cost
3.99 EA
6.99 EA
7.99 EA
Order
Mult.
Weight
Unit
Cost
1/0/5
1/0/5
1/0/5
1/0/5
1/0/4
1/0/4
6.780
7.700
8.600
7.700
7.380
10.550
24.99 EA
29.99 EA
31.99 EA
34.99 EA
37.99 EA
44.99 EA
CLAMPS/ VSI E S
Task Tools
CLAMPS /VI SES
Quick Support Rod - Your extra hand to hold drywall, crown
Mini Quick-Grip® Bar Clamp - High-carbon, heat-treated steel
bar. Soft, pliable pads protect fine finishes. Ideal for clamping
small jobs. Slides, adjusts and clamps
all with 1 hand. Clamp for gluing, nailing
and drilling.
Product
No.
Mfg.
No.
Description
345687-B
356352-B
546
5412
6"
12"
Order
Mult.
Weight
1/0/5
1/0/5
.775
1.000
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
moulding, cabinets, tub surrounds, heating and ventilation ducts,
and almost anything else. Height adjustments from 5’3" to 9’5". Fast
ratchet action and safety dead-lock. Cushion-grip and adjustable
rubber face. Will support up to 100 lb. at 90° and 55 lb. at 45°.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
373168-C
T74500
Support Rod
1/0/10
5.500
Unit
Cost
22.99 EA
Unit
Cost
14.49 EA
17.49 EA
10-79
HAND TOOLS
steel bar. Soft, pliable pads protect fine finishes.
Slides, adjusts, and clamps all with 1 hand.
Clamp for gluing, nailing, and drilling. Ends
can be switched around and turned into a
spreader.
HAND TOOLS
*YOST
*YOST
10-80
Save time by letting us locate those
hard-to-find items for you!
HAND TOOLS
*YOST
HAND TOOLS
*YO ST
We can become your single-source supplier
on many of the products you currently use!
10-81
HAND TOOLS
*YOST
*YOST
10-82
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
CLAMPS/VISES
CLAMPS /VI SES
CLAMPS/ VSI E S
Pony Bench Vise - Light-duty. Square 4-hole swivel base with
construction, these universal mounts are ideal for users having
more than 1 miter saw and provide fast
and easy on/off access to the stand.
Clamps fit on all Stablemate portable
miter saw stands. The universal mounts
are also perfect for mounting various
small power tools supported by
Stablemate sawhorses. This unit
mounts easily to most tools providing a
versatile, stable platform for a variety of project applications. When not in
use, clamps serve as a base for the tool. Clamps are sold as a pair.
lockdown. Ground and polished anvil. Hardened steel jaw
faces with cast-iron pipe jaws and large
forming horn. Cast-iron body with
orange enamel finish. Plated sliding pin
handles.
Product
No.
Mfg.
No.
Description
319462-C
SM-200
Uni Tool Mounting Clamps
Order
Mult.
Weight
0/0/1
3.000
Unit
Cost
Product
No.
Mfg.
No.
346489-C
24545
32.99 PR
Description
4-1/2" jaw width, 4-1/2" jaw
opening
Order
Mult.
Weight
Unit
Cost
1/0/4
13.250
41.99 EA
CLAMPS /VI SES
CLAMPS/ VSI E S
Bench Vise - Light-duty. Cast-iron jaws and base plate. Forged steel
channel beam. Polished replaceable steel
jaw faces. 360° swivel base. Built-in
pipe jaws. Enameled finish. Ground and
polished anvil. Import.
Product
No.
Mfg.
No.
309273-C
MV711
309265-C
MV712
Description
3-1/2" jaw width, 3" jaw
opening
4" jaw width, 5" jaw opening
Order
Mult.
Weight
Bench Vise - Light-duty. 3" jaw width, 2" jaw opening. Jaw faces have
smooth machined surfaces. Malleable iron
body. 2 steel rods for strength and alignment.
Mounts securely on edges up to 2-1/2" thick.
Unit
Cost
1/0/6
11.667
22.99 EA Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
1/0/4
10.500
29.49 EA
BV30
3" Bench Vise
1/0/12
3.667
318256-C
Unit
Cost
17.79 EA
CLAMPS /VI SES
CLAMPS/ VSI E S
Adjustable Clamp
Bench Vise - Heavy-duty. Cast-iron jaws and base plate. Forged steel
channel beam. Polished replaceable steel
jaw faces. 360° swivel base. Built-in
pipe jaws. Enameled finish. Ground and
polished anvil. Import.
Product
No.
Mfg.
No.
Description
304468-C
309303-C
318310-C
HDV4
HDV5
HDV6
4" jaw width, 5" jaw opening
5" jaw width, 6" jaw opening
6" jaw width, 6" jaw opening
Order
Mult.
Weight
Unit
Cost
1/0/2
0/0/1
0/0/1
28.000
42.000
64.000
44.99 EA
69.99 EA
94.99 EA
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
Adjustable Iron C-Clamp - Light-duty DIY and household clamps.
Heat-treated malleable iron frame. Smooth, clean, natural
finish. Swivels are revolving and
oscillating type. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
319738-C
319747-D
319756-C
319765-C
322902-D
1415-C
1420-C
1422-C
1425-C
1450-C
1-1/2" x 1-1/2"
2" x 1"
2-1/2" x 1-3/8"
2-1/2" x 2-1/2"
5" x 3-1/4"
1/6/72
1/0/5
1/6/72
1/6/72
1/0/5
.253
.250
.462
.750
2.250
Unit
Cost
2.99 CD
2.79 CD
4.79 CD
4.99 CD
10.79 CD
CLAMPS/ VSI E S
DIB Tool Imports
Do it™ Pipe Clamp - For use with 3/4" diameter pipe (not included).
Malleable steel with baked enamel finish. Precision
machined screw and swivel. Lifetime
warranty. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
316822-E
316822
3/4" Pipe Clamp
1/4/24
2.781
Unit
Cost
8.99 EA
10-83
HAND TOOLS
Adjustable Clamp
Universal Mounting Clamp - Stablemate label. Galvanized steel
HAND TOOLS
CLAMPS/VISES
CLAMPS/ VSI ES
CLA MPS/ VSI ES
Adjustable Clamp
Bessey Tools
Jorgensen Steel Bar Clamp - Grips the bar at any point. Allows
Bessey Tradesmen™ Bar Clamp - Oversized, bright-drawn
profiled rail features I-beam design, minimizes flexing and bending
common with flat bar clamps. Bright
zinc rail finish prevents black marks on
wood and won’t ever rust. Unique,
no-slip locking device with a set screw
that is permanently molded into sliding
arm to prevent slippage. The tighter you
clamp, the tighter it holds. High-quality
jaws are malleable cast-iron, precision
fit to rail. Oversized, nonmarring pads
Product
Mfg.
Order
Unit
No.
No.
Description
Mult.
Weight
Cost
protect your work, stops dimpling.
324388-B
3730
30"
1/0/5
2.833
13.99 EA Oversized Acme thread for positive grip with minimum turns.
Ergonomically designed wooden handle, comfortable fit allows maximum
clamping pressure. Medium-duty, rail size: 1" x 5/16" and 880 lb. of
Bessey Tools
Bessey Mighty Mini™ LM Bar Clamp - The bright-drawn steel clamping pressure. 4" throat depth and 8" opening.
rail is galvanized and serrated on both sides. Steel is manufactured by
Product
Mfg.
Order
Unit
No.
No.
Description
Mult.
Weight
Cost
Bessey. The jaws are of injection
309745-C
TG4.008
4x8 Bar Clamp
1/0/10
1.250
15.99 EA
molding, special zinc alloy. The large
plastic pressure pad reduces marring
Adjustable Clamp
and dimpling of work. The Acme thread,
cold rolled screw requires fewer turns to
Jorgensen Hold-Down Clamp - Mount to hold work in any
clamp the project. Designed to fit any
location - a distinct advantage over conventional clamps which function
hand, the maple handle is comfortable
only near the edge. Slides on and off
and ensures maximum clamping
preslotted holding-bolt in wood or metal
pressure. Great for inplace of a C clamp
bench. Opening capacity 3". Boxed.
and are 9 times faster. Light-duty, rail size: 19/32" x 7/32", and 330 lb. of
clamping pressure. 2" depth.
sliding head to be zipped to position against the work. Hard
maple handle. Clutch-disc extension
permits easy finger release. Malleable
iron, baked orange enamel finish. 6" to
36" maximum open capacity.
CLAMPS/ VSI ES
CLA MPS/ VSI ES
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
310190-C
310484-C
310980-C
LM2.004
LM2.008
LM2.012
4" opening
8" opening
12" opening
1/0/30
1/0/10
1/0/10
.570
.680
.810
Unit
Cost
5.49 EA
5.99 EA
6.49 EA
CLAMPS/ VSI ES
Bessey Tools
Bessey Tradesmen™ Bar Clamp - Oversized, bright-drawn
profiled rail features I-beam design, minimizes flexing and bending
common with flat bar clamps. Bright
zinc rail finish prevents black marks on
wood and won’t ever rust. Unique,
no-slip locking device with a set screw
that is permanently molded into sliding
arm to prevent slippage. The tighter you
clamp, the tighter it holds. High-quality
jaws are malleable cast-iron, precision
fit to rail. Oversized, nonmarring pads
protect your work, stop dimpling.
Oversized Acme thread for positive grip
with minimum turns. Ergonomically designed wooden handle, comfortable
fit allows maximum clamping pressure. Medium-duty, rail size: 1" x 1/4"
and 600 lb. of clamping pressure. 2-1/2" depth.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
306665-C
309230-C
309508-C
TGJ2.512
TGJ2.524
TGJ2.536
12" opening
24" opening
36" opening
1/0/10
1/0/10
1/0/10
1.000
1.000
1.750
10-84
Unit
Cost
11.49 EA
14.49 EA
17.99 EA
Product
No.
Mfg.
No.
Description
306533-C
1623
3" Hold Down Clamp
Order
Mult.
Weight
1/0/6
2.000
Unit
Cost
16.49 EA
CLA MPS/ VSI ES
Bessey Tools
Bessey K Body™ Clamp - The K Body™ true parallel jaws, unique
design and superior construction provide a lifetime of
perfect glue-ups for the woodworker. Great for cabinet,
door, and face frame construction. Both sliding and
fixed jaws are all-steel construction for ultimate strength
and stability. Jaws are encased in super polyamids,
nonmarring and glue-resistant. Large, parallel
rectangular jaws, distribute even pressure across the
entire smooth surface of the jaw, elimiates bowing or
lifting common with conventional pipe clamps and bar
clamps. Bright zinc finished, drawn steel rail, prevents
black marks on wood and won’t ever rust. Bright-drawn,
profiled rail, I-beam minimizes flexing and bending. Rail
is serrated on 6 sides for extra positive grip. Precision
sliding arm mechanism, ensures arm is always at right
angles to the rail. Oversized Acme thread, positive grip
with minimum turns. Ergonomically designed wood handle, comfortable for
any hand and up to 1000 lb. of clamping pressure. Rail size: 1-1/8" x 3/8".
3-1/2 depth.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303445-B
303461-B
303496-B
303569-C
K3.524
K3.540
K3.550
K3.560
24" opening
40" opening
50" opening
60" opening
1/0/5
1/0/5
1/0/5
1/0/5
5.500
7.250
8.250
9.250
Unit
Cost
32.99 EA
38.99 EA
42.99 EA
47.99 EA
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
CLAMPS/VISES
CLAMPS /VI SES
CLAMPS/ VSI E S
Bessey Tools
Bessey Tools
4 K Body™ clamps to create perfectly square clamping set ups. Easily
assemble work pieces for glue-ups. Use
for cabinet doors, face frames, and
boxes. Accessory item for use with
K-Body™ clamps.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303992-B
KP
Framing Blocks
1/0/12
1.092
Unit
Cost
profiled rail features I-beam design, minimizes flexing and bending
common with flat bar clamps. Bright
zinc rail finish prevents black marks on
wood and won’t ever rust. Unique,
no-slip locking device with a set screw
that is permanently molded into sliding
arm to prevent slippage. The tighter you
clamp, the tighter it holds. High-quality
jaws are malleable cast-iron, precision
fit to rail. Oversized, nonmarring pads
protect your work, stops dimpling.
Oversized Acme thread for positive grip with minimum turns.
Ergonomically designed wooden handle, comfortable fit allows maximum
clamping pressure. Heavy-duty, rail size: 1-1/4" x 3/8" and 1320 lb. of
clamping pressure.
Product
19.99 EA No.
CLAMPS /VI SES
Bessey Tools
Bessey K Body™ Maxis - Accessory item for K Body™ clamps.
Mfg.
No.
Description
304344-B
KBM-1
Variopivot Clamp
Order
Mult.
Weight
1/0/6
4.000
310034-C
TG5.512
310107-C
TG7.016
Description
5-1/2" depth and 12"
opening
7" depth and 16" opening
Order
Mult.
Weight
Unit
Cost
1/0/10
5.000
25.99 EA
1/0/5
6.000
31.99 EA
CLAMPS/ VSI E S
2-piece set turns any K Body™ clamp into vario-pivot bench
vise. Clamp and hold work for edge and
service preparation. The Maxis can be
used with any size K Body™ clamp or
even an ordinary pipe clamp. The
positive locking device can be fixed at
any angle from 0° to 270°, holding the
work at the most convenient angle.
Great for furniture makers, restorers,
cabinet makers, carvers, and hobbyists.
Product
No.
Mfg.
No.
Bessey Tools
Unit
Cost
44.99 EA
Bessey Tradesman Heavy-Duty Bar Clamp - Oversized,
bright-drawn profiled rail features I-beam design, minimizes flexing and
bending common with flat bar clamps.
Bright zinc rail finish prevents black
marks on wood and won’t ever rust.
Unique, no-slip locking device with a set
screw that is permanently molded into
sliding arm to prevent slippage. The tighter you clamp, the tighter it holds.
High-quality jaws are malleable cast-iron, precision fit to rail. Oversized,
nonmarring pads protect your work, stop dimpling. Oversized Acme thread
for positive grip with minimum turns. Ergonomically designed wooden
handle, comfortable fit allows maximum clamping pressure. Heavy-duty,
rail size: 1-1/4" x 3/8" and 1540 lb. of clamping pressure. 4-1/2" depth.
CLAMPS /VI SES
Bessey Tools
Bessey Uni Clamp - Large jaws provide over 11 sq. in. of clamping
surface. Great for irregular and rounded shapes.
Light-duty parallel clamping squares up work.
Built to lighter specifications than the K-Body.
Consistent, even pressure right to the tips of
the jaws. The UniKlamp’s reversible jaws
quickly convert it to a spreader. Tail adapter
holds rail even with work surface. 3-1/8" depth,
12" opening, and 550 lb. of clamping pressure.
Product
No.
Mfg.
No.
Description
304425-B
UK3.012
12" Uni Clamp
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Unit
Cost
313084-C
313324-C
313378-C
TGK4.524
TGK4.540
TGK4.550
24" opening
40" opening
50" opening
1/0/5
1/0/5
1/0/5
7.000
9.000
10.500
34.99 EA
42.99 EA
47.99 EA
CLAMPS/ VSI E S
Bessey Tools
Bessey Edge Clamp Adaptor - Quickly converts most standard
Order
Mult.
Weight
1/0/6
1.500
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
Unit
Cost
17.99 EA
bar clamps, any manufacturer, into a 3-way edge clamp. Perfect for
all types of edge gluing and cabinetry work.
Unqiue, no slip-locking device attaches to rail of
standard bar clamp. Oversized, nonmarring
pad protect your work, stops dimpling.
Oversized Acme thread for positive grip with
minimum turns. Ergonomically designed wooden handle, comfortable fit
allows maximum clamping pressure.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
310115-C
5-1
Edge Clamp
1/0/5
.500
Unit
Cost
9.99 EA
10-85
HAND TOOLS
Bessey K Body™ Framing Blocks - 4 blocks per set. Use with Bessey Tradesmen™ Bar Clamp - Oversized, bright-drawn
HAND TOOLS
CLAMPS/VISES
CLAMPS/ VSI ES
CLA MPS/ VSI ES
Bessey Tools
Bessey Tools
Bessey Strap Clamp - The Bessey model No. VAS-23 variable
Bessey PowerGrip™ - A breakthrough in hand clamping
angle strap clamp is made to tackle hundreds for projects and
repairs, from picture framing to repairing worn out
chairs and furniture. Clamp provides 100 lb. of
tensile strength, more than enough pressure for any
job. Generous 23’ of seat belt grade web band,
enough to hold a 4’ x 6’ frame. Ordinary ratcheting
style strap clamps are 12’ to 15’. Unique adjustable
or removable corner pivot guides hold work securely,
angles and miters align perfectly. Adjusts between
60° and 180°. Clamp draws strap from both
directions, this limits the shifting of work that is common with other strap
clamps. Use this product for any irregular shape, furniture assembly or
repair, and all types of frame assembly.
technology, a 1-handed clamp with up to 1000 lb. of clamping
pressure. The innovative 2-way hand lever gives you the
flexibility to operate the clamping action from either the rail
side or the handle side of your work. Bright-drawn,
spring-tempered steel rail, minimizes flexing and bending,
won’t ever rust and prevents black marks on wood. Quick
release button for rapid movement of sliding arm. Glass fiber
reinforced polymer housing and hand lever, tough enough
for industrial use. Plastic pressure, nonmarring, nonslip,
glue-resistant pads protect your work, easily removed for
use on metal. Wood handle, 4" depth, 200 lb. pressure with
lever and 1000 lb. of pressure with handle.
Product
No.
Mfg.
No.
Description
311332-B
VAS-23
23" Strap Clamp
Order
Mult.
Weight
1/0/5
1.700
CLAMPS/ VSI ES
Bessey Tools
Unit
Cost
Product
34.99 EA No.
311820-B
313459-B
Bessey Angle Clamp - Holds and aligns materials up to 2" thick and
automatically adjusts to variations in wood
thickness. Cast jaws are plastic-coated, work is
protected from damage. Glue-resistant, easy
clean up. 90° design, draws and holds perfect
miters and T-joints. Open design allows for
ample clearance to screw, nail, or staple
materials together. Clamping capacity: 1-1/8"
for T-joint, 2" for uniform material thickness ,
2-1/2" 1-side, 7/8" ther side (different material
thickness).
Product
No.
Mfg.
No.
Description
311359-B
WS-3
Angle Clamp
Mfg.
No.
Description
Order
Mult.
Weight
PG4.012
PG4.024
12" opening
24" opening
1/0/5
1/0/5
3.500
3.500
Unit
Cost
42.99 EA
47.99 EA
CLA MPS/ VSI ES
Bessey Tools
Wood Handscrew Clamp - For gluing and assembly of woodwork,
furniture, cabinet work, etc. Hard maple jaw. Deep throat
affords evenly distributed pressure or
concentration at 1 point. Angle of jaws
adjustable to fit the work or overlap 1 jaw
behind the other.
Order
Mult.
Weight
1/0/6
2.500
Unit
Cost
22.99 EA
CLAMPS/ VSI ES
Bessey Tools
Bessey Timber Framing Clamp - Striking surface to spike into
framing lumber. Penetrating spike drives securely into framing
timber. High-strength steel rail for
optimum strength and stress loading.
4-3/4" depth and 24" opening.
Product
No.
Mfg.
No.
319925-C
HS-6
352852-D
HS-8
319907-C
HS-10
319916-C
HS-12
Description
6" jaw length, 3" maximum
opening
8" jaw length, 5" maximum
opening
10" jaw length, 7" maximum
opening
12" jaw length, 9-1/4"
maximum opening
Order
Mult.
Weight
Unit
Cost
1/0/12
2.750
17.99 EA
1/0/6
4.000
21.99 EA
1/0/3
2.667
25.99 EA
1/0/3
4.417
29.99 EA
CLA MPS/ VSI ES
Klein Tools
Product
No.
Mfg.
No.
Description
313510-C
TF4.7524
24" Framing Clamp
10-86
Order
Mult.
Weight
1/0/5
6.500
Unit
Cost
77.99 EA
Grip It® Strap Wrench - Urethane-covered, high-strength belting
attached to lightweight, I-beam handle with patented
cam-action design permits uniform,
high-torque application. Under normal
conditions will not scratch, damage, or
deform polished pipe and fittings,
plastic pipe and fittings, oil and water
filters, glass pipe, PVC conduit, and
polished shafts. Also works on
alternator belts, flywheels, and propeller
assemblies. Works in the tightest
quarters. Can be ratcheted with 1-hand.
Product
No.
Mfg.
No.
325139-B
S6H
325198-B
S12H
Description
6" handle, 1-1/2" to 5"
diameter capacity
12" handle, 1-1/2" to 5"
diameter capacity
Order
Mult.
Weight
Unit
Cost
1/0/6
.275
15.79 EA
1/0/6
.908
25.49 EA
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
CLAMPS/VISES
CLAMPS /VI SES
PIPE/ TUBNI GTO OLS
Ridgid Tool
Pipe Wrench - Replaceable jaws of hardened alloy steel. Full floating Oil Filter PVC Plier - Drop forged. Electronic coating to prevent
rusting. right angle teeth grip in all directions and
come with Channellock Blue®
comfort-grips. PermaLock® fastener
eliminates nut and bolt failure.
Product
No.
Mfg.
No.
Description
330305-C
330314-C
330323-B
330332-B
330341-B
330350-A
330369-B
330378-C
31000
31005
31010
31015
31020
31025
31030
31035
6"
8"
10"
12"
14"
18"
24"
36"
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
0/0/1
.458
.917
1.875
3.000
3.833
5.917
9.792
20.000
Unit
Cost
16.99 EA
19.99 EA
21.99 EA
27.99 EA
28.99 EA
39.99 EA
64.99 EA
159.99 EA
CLAMPS /VI SES
Ridgid Tool
Rapidgrip™ Pipe Wrench - 1-handed adjustment with rapid
ratcheting action. Aggressive tooth design for secure grip. Thumb
trigger for easy application and removal.
Product
No.
Mfg.
No.
316615-A
10348
322121-A
10358
Description
10", 1-1/2" pipe capacity, 1"
fitting capacity
14", 2" pipe capacity, 1-1/2"
fitting capacity
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
333561-B
333570-B
333589-B
209
212
215
9"
12"
15"
1/5/10
1/5/20
1/2/10
1.020
1.145
2.290
Unit
Cost
14.99 EA
19.99 EA
23.99 EA
PIPE/ TUBNI GTO OLS
Danaher Tool Group
6" 2-Jaw Gear Puller - Remove gears, pulleys and collars from
shafts. Reversible jaws permit pulling on inside lip of
gears and pulleys. Jaws and yokes drop-forged and
precison heat-treated for maximum strength. 6"
spread, 3-1/2" reach. 5 ton.
Order
Mult.
Weight
Unit
Cost
1/0/12
1.625
24.99 EA
1/0/10
4.000
Product
29.99 EA No.
321173-C
Mfg.
No.
Description
3552
6" 2-jaw Gear Puller
Order
Mult.
Weight
0/0/1
1.870
Unit
Cost
49.99 EA
CLAMPS /VI SES
Ridgid Tool
PIPE WRE NCHES
Danaher Tool Group
Chain Wrench - For round, square or irregular shapes. Fast
6" 3-Jaw Gear Puller - Remove gears, pulleys and collars from
ratchet-like action. Replaceable hardened alloy steel jaws.
Tempered steel chain held securely in double lock grips,
releases quickly. Rated capacity 2". Chain length 18-9/16".
Product
No.
Mfg.
No.
Description
330617-A
31315
Chain Wrench
Order
Mult.
Weight
0/0/1
2.750
shafts. Reversible jaws permit pulling on inside lip of
gears and pulleys. Jaws and yokes drop-forged and
precision heat-treated for maximum strength. 5"
spread, 3-1/2" reach. 2 ton.
Unit
Cost
54.99 EA
Product
No.
Mfg.
No.
Description
304281-C
3561
6" 3-jaw Gear Puller
Order
Mult.
Weight
0/0/1
2.400
Unit
Cost
46.99 EA
PIPE WRE NCHES
General Tools
Flaring Tool - Quick opening bars and screw yoke. Heavy-duty wing
PI E WRENCHE S
Chain Clamp And Wrench - Vise-Grip locking pliers principle.
Holds and locks around anything, any size, any shape, anywhere
chain can be wrapped around. Adjusts
quickly to ratchet action in either
direction. Made of alloy steel. 18" chain
length.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
330635-C
20-R
18" Chain Wrench
1/5/10
1.833
Your representative can give you details
on product availability and shipping requirements!
Unit
Cost
nuts permit quick opening of nickel-plated 9/16"
steel bars. Screw yoke with plated free
wheeling cone permits quicker,
smoother flaring. Flares standard sizes:
3/16" to 5/8". Carded. Made in U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
379948-D
151
Flaring Tool
1/0/3
1.140
Unit
Cost
21.49 EA
41.49 EA
10-87
HAND TOOLS
hook jaw gives instant grip and release.
Handy pipe scale and easy-to-spin
adjusting nut. Comfort-grip, malleable
iron I-beam handle.
HAND TOOLS
PIPE/TUBING TOOLS
Pipe/Tubing oT l s
PI PE/ TUBNI GTO LS
General Tools
General Tools
Tubing Bender - Spring-type tubing bender for easy bending of
Mini Tubing Cutter - Cuts up to 7/8" tubing. Wide frame for a more
stable cutting surface. Large diameter beveled knob.
Easy to change cutting wheel. (Uses
wheel model No. RW1211/2). Carded.
copper and other thin wall tubing without kinking or
collapsing. Made of special oil
hardened spring steel and cadmium
plated. O.D. tube sizes: 3/8" and 1/2".
Lengths: 10" and 12".
Product
No.
Mfg.
No.
Description
331741-C
331750-C
100-3/8
100-1/2
3/8", 10" long
1/2", 12" long
Order
Mult.
Weight
1/0/6
1/0/6
.167
.417
Unit
Cost
1.79 EA
2.49 EA
PI E WR ENCHES
General Tools
6-Piece Tube Bender Set - Spring-type benders in 1/4", 5/16", 3/8",
7/16", 1/2", and 5/8" sizes for easy bending of copper
and other thin wall tubing without
kinking. Bright plated finish. Carded.
Made in U.S.A.
Product
No.
Mfg.
No.
Description
379964-D
129
Mini Tubing Cutter
Order
Mult.
Weight
1/0/5
.206
Unit
Cost
4.99 EA
PI PE/ TUBNI GTO LS
General Tools
Tubing Cutter With Rollers - Precision cast-iron 2
Product
No.
Mfg.
No.
Description
320420-D
S106
6pc Tube Bender Set
Order
Mult.
Weight
0/0/1
1.050
Unit
Cost
friction-elimination flare-groove rollers. Slide lock reamer. For cutting
tubes 1/8" to 1-1/8". Carded. Refer to
model No. RW121/2 for replacement
cutter wheel.
11.99 SET
PI E WR ENCHES
General Tools
Compound Tube Bender - Bends 1/8", 1/4", and 3/8" thru wall
tubing. Single action 180° bends. Calibrated angle
markings from 0° to 180° making accurate left,
right, and offset bends. Rounded extra long hands
for greater leverage and comfort. Carded. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
354707-D
120
Tubing Cutter
Order
Mult.
Weight
1/0/5
.538
Unit
Cost
9.99 EA
PI PE/ TUBNI GTO LS
General Tools
Replacement Cutter Wheel - Replacement tool steel cutter wheel,
for all general cutters, includes 2 wheels. Carded.
Product
No.
Mfg.
No.
Description
379921-D
153
Compound Tube Bender
Order
Mult.
Weight
1/0/2
1.575
Unit
Cost
29.99 EA
PI E/ TUBI NG TO OLS
General Tools
Repair Reamer - Quality steel reamer enlarges holes 1/8" to 1/2".
T-handle provides balanced grip. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302392-D
RW121/2
Replacement Cutter Wheel
1/0/10
.001
Unit
Cost
4.79 CD
PI PE/ TUBNI GTO LS
General Tools
Heavy-Duty Tubing Cutter - Large capacity, for heavy-duty and
industrial applications. Twin hardened flare groove rollers.
Double retractable tool steel reamer.
Uses replaceable hardened alloy steel
cutting wheel model No. RW122.
Capacity 1/4" to 1-1/2". Carded.
Product
No.
Mfg.
No.
Description
300314-D
130
Repair Reamer
10-88
Order
Mult.
Weight
1/0/5
.500
Unit
Cost
Product
No.
Mfg.
No.
Description
318787-D
125
Tubing Cutter
Order
Mult.
Weight
1/0/3
1.200
Unit
Cost
18.49 EA
16.49 EA
Service is our priority!
Our commitment is to meet your needs!
HAND TOOLS
PIPE/TUBING TOOLS
PI E T/ UBI NG TO LS
PIPE/ TUBNI GTO OLS
General Tools
Ridgid Tool
Professional Tubing cutter - Cuts copper tubing/plastic pipe 3/8" Tubing Cutter - For cutting 3/16" to 1-1/8" copper or brass tubing.
to 2-5/8". Cuts iron pipe 3/8" to 1-1/4". Extra wheel stores
in handle. Fast action, push button
control catches on more threads for
longer life. Large rollers, hardened and
grooved. Fully enclosed deburring tool
locks into position. (Uses cutting wheel
model No. RW122). Carded. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
379980-C
126
Tube/pipe Cutter
Improved design. Uses wheel model No. 33190 or
33185.
Order
Mult.
Weight
1/0/2
2.067
Unit
Cost
Product
No.
Mfg.
No.
Description
331769-B
31622
Tubing Cutter
29.99 EA
Order
Mult.
Weight
0/0/1
.500
Unit
Cost
29.99 EA
Ridgid Tool
General Tools
Cutter Wheel - Standard replacement cutter wheel. For use with
Heavy-Duty Pipe Cutter - Cuts steel pipe from 1/8" to 2-5/8".
tubing cutter model No. 31622.
High-strength forged castings with steel handle. Premium,
heavy-duty cutter wheel is easily
changeable. Fine action adjusting for
better control. (Uses cutting wheel
model No. RW122). Carded. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
379972-D
127
2" Pipe Cutter
Order
Mult.
Weight
1/0/2
2.531
PI E T/ UBI NG TO LS
General Tools
Unit
Cost
Product
44.99 EA No.
331787-B
Mfg.
No.
Description
Order
Mult.
Weight
33185
Replacement Cutter Wheel
1/0/12
.300
Unit
Cost
6.49 EA
PIPE/ TUBNI GTO OLS
Replacement Cutter Wheel - Replacement cutting wheel for use
with all general cutters. Carded. Iron pipe cutting wheel.
Made in U.S.A.
Ridgid Tool
Tubing Cutter - 1/8" to 2-3/8" O.D. capacity. Instant slide-action size
adjustment. Fold in reamer. Spare wheel carried in
handle (uses model No. 33185 or 33190 cutter
wheel).
Product
No.
Mfg.
No.
Description
331803-A
33055
Tubing Cutter
Order
Mult.
Weight
0/0/1
.750
Unit
Cost
77.99 EA
PIPE/ TUBNI GTO OLS
Product
No.
Mfg.
No.
Description
380016-D
RW122
Replacement Cutter Wheel
Order
Mult.
Weight
1/0/6
.012
Unit
Cost
Ridgid Tool
Pipe Cutter - Extra long shank protects adjustment threads. Extra large
handle for quick easy adjustment.
Balanced frame of special malleable
iron. Converts to 3-wheel cutter by
General Tools
PVC Cutter - Cuts plastic pipe up to 1-5/8". Multiple step cutting action replacing rollers with optional cutter
wheels, model No. 33100. 1/8" thru 2"
requires less effort and creates a
capacity.
square, smoother cut. Low profile
design gets into tight areas. Handle
locks for extra safety. Carded. Made in
U.S.A.
Product
Mfg.
Order
Unit
7.29 EA
PI E T/ UBI NG TO LS
No.
No.
Description
Mult.
Weight
331876-B
32820
1/8-2 Pipe Cutter
0/0/1
7.500
Cost
144.99 EA
PIPE/ TUBNI GTO OLS
Ridgid Tool
Product
No.
Mfg.
No.
Description
379999-D
119
Pvc Cutter Ratchet
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
Order
Mult.
Weight
1/0/2
1.514
Unit
Cost
29.99 EA
Cutter Wheel - Heavy-duty wheels for No. 1A (model No. 32810) and
2A (model No. 32820) pipe cutter. Will also fit No. 2 Superior
pipe cutter.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
331885-B
33100
Wheel Cutter
1/0/12
.750
Unit
Cost
8.79 EA
10-89
HAND TOOLS
PIPE/ TUBNI GTO OLS
PI E T/ UBI NG TO LS
HAND TOOLS
PIPE/TUBING TOOLS
PI E/ TUBI NG TO OLS
PI PE/ TUBNI GTO LS
Ridgid Tool
Cooper Tools
Flaring Tool - 45° flares, 1/8" to 3/4", 8 sizes. Feed releases
Snip -
automatically when flare is fully formed.
Reversing feed screws burnishes flare.
Hardened steel die bars, precision machined.
Large, ratcheting comfort-grip feed screw
handle turns easily. Precision ground,
hardened steel flaring cone eccentrically
mounted in precision bearings.
Product
No.
Mfg.
No.
332394-B
M1R
332401-B
M2R
332410-B
M3R
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
331661-A
83037
Flaring Tool
0/0/1
3.500
Unit
Cost
129.99 EA
Description
Cuts left curves to straight,
1-3/8" cut, red grips
Cuts right curves to straight,
1-3/8" cut, green grips
Cuts straight or wide curves
left and right, 1-1/2" cut,
yellow grips
Order
Mult.
Weight
Unit
Cost
1/6/24
.960
14.79 EA
1/6/24
.960
14.79 EA
1/6/24
.960
14.79 EA
PI PE/ TUBNI GTO LS
PI E/ TUBI NG TO OLS
Ridgid Tool
Cooper Tools
Pipe Vise - Bench yoke vise. With pipe benders and pipe rests.
Unusually handy and efficient. Yoke and base of
strong special malleable iron. Highest quality
iron grip tool steel jaws. Capacity 1/8" thru 2".
Snip - Bulldog for notching or trimming heavy stock. 7/8" cut; red grips.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
332429-C
M5R
9-3/4" Comb Cut Snip
1/6/24
1.000
Unit
Cost
23.49 EA
SN IPS/ CUT ERS
Cooper Tools
Snip - Offset blades keep material away from hands.
Product
No.
Mfg.
No.
Description
332170-A
40080
1/8-2 Pipe Vise
Order
Mult.
Weight
0/0/1
8.250
Unit
Cost
144.99 EA
PI E/ TUBI NG TO OLS
Ridgid Tool
Pipe Threader - 3/8" to 1" capacity. 1 each of 3/8", 1/2", 3/4" and 1"
drop head dies. Head locks in or releases by
pull of ratchet knob. Separate sets of
alloy steel chaser dies quickly removed
or reversed for close-to-wall threads.
Product
No.
Mfg.
No.
302724-B
M6R
302732-B
M7R
Description
Circle left or straight, red
grips
Circle right or straight, green
grips
Order
Mult.
Weight
Unit
Cost
1/6/24
.958
17.99 EA
1/6/24
.958
17.99 EA
SN IPS/ CUT ERS
Cooper Tools
Snip - Multipurpose cutting tool. Various uses include cutting screen,
Product
No.
Mfg.
No.
Description
331858-A
36355
3/8" To 1" Pipe Threader
Order
Mult.
Weight
Unit
Cost
0/0/1
10.750
299.99 SET
light-gauge sheet metal, carpeting, and
synthetic shingles.
PI E/ TUBI NG TO OLS
Ridgid Tool
Thread Cutting Oil - Special purpose sulphurland cutting oil that
cools, speeds metal removal, cleans threads and
prevents chips from welding to dies. Will not
congeal at 20° F. For drilling, turning and other
metal cutting operations. Not for use as a
lubricant. Gallon.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355430-C
MPC-3
9" Straight Snip
1/6/24
.750
Unit
Cost
13.99 EA
SN IPS/ CUT ERS
Cooper Tools
Snip - Compound action multiplies the force of the hand for easy cutting
action. Multipurpose cutting tool. Cuts
plastic, sheet metal, aluminum, vinyl
siding, and screening. Cuts up to
20-gauge steel. Longer, nonslip,
serrated jaws along with a nonslip
HI-VIS orange grip. Carded.
Product
No.
Mfg.
No.
Description
355089-A
70835
Thread Cutting Oil
Order
Mult.
Weight
1/0/6
8.333
Unit
Cost
19.99 GAL Product
No.
333247-B
10-90
Mfg.
No.
Description
Order
Mult.
Weight
M300
Compound Action Snip
1/6/24
.250
Unit
Cost
15.49 EA
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
SNIPS/CUTTERS
SNIPS/ CUT ER S
NOTE 1: Metalmaster Snips feature drop-forged jaws of wear-resistant special molybdenum steel
to provide extra service demanded by the compound lever action and to withstand the severe strain
of cutting heavy stock.
Prosnip® Offset Snip - Forged steel blades with exclusive
SNI PS/CU T ERS
Cooper Tools
Snip - Pipe and duct snip cuts straight or curves. Widely used in heating
pinch-point wire cutter. Special design keeps hands safely above
the work.
and air conditioning industry. Special
piercing tip permits a quick start. Blade
design causes 1/8" strip to coil away
from operator’s hands. Yellow grips.
Mfg.
No.
332198-C
M41R
Description
Order
Mult.
Weight
Compound Pipe Snip
1/6/24
.967
Unit
Cost
Product
No.
Mfg.
No.
302457-C
2073211
302465-C
2073212
26.49 EA
NOTE 1: Metalmaster Snips feature drop-forged jaws of wear-resistant special molybdenum steel
to provide extra service demanded by the compound lever action and to withstand the severe strain
of cutting heavystock.
Description
Left cutting and straight, red
grip
Right cutting and straight,
green grip
Order
Mult.
Weight
Unit
Cost
1/5/25
.950
16.79 EA
1/5/25
.950
16.79 EA
SNIPS/ CUT ER S
Klein Tools
Nibbler Tool - Cuts steel up to 18-gauge . Copper, aluminum, plastic
SNI PS/CU T ERS
Cooper Tools
All-purpose Snip - Compound action multiplies the force 5 times for
easier cutting action. All-purpose cutting tool.
Cuts plastic, aluminum, vinyl siding, and
screening. Extra long, 3", chrome
plated, scalloped, and serrated blades.
Nonslip textured cushion grip. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
393231-C
MPX
3" All Purchase Snip
1/0/24
.900
up to 1/16". Perfect for duct work, aluminum
siding, and auto work.
Unit
Cost
Product
21.49 EA No.
314293-C
SNI PS/CU T ERS
Cooper Tools
Mfg.
No.
Description
Order
Mult.
Weight
76011B
Tool Nibbler
1/0/6
.500
Unit
Cost
26.99 EA
SNIPS/ CUT ER S
Snips - Duckbill pattern features the advantage of cutting moderately
tight curves left or right in light stock.
General Tools
Belt Puncher - 9" spring tension, self-opening tool for punching holes
in leather, plastics, rubber, canvas, cardboard
and similar materials. Nickel-plated steel with 6
tapered hardened steel punches. Sizes: 5/64", 3/
32", 7/64", 1/8", 5/32", and 3/16".
Product
No.
Mfg.
No.
Description
332517-C
332535-B
V10N
V19N
2-1/4" cut, 10" long
3" cut, 13" long
Order
Mult.
Weight
1/0/6
1/0/6
1.000
1.950
Unit
Cost
15.99 EA
17.99 EA
SNI PS/CU T ERS
Cooper Tools
Snips - Straight pattern for cutting straight or very wide curves in light
stock. Inside edge of blade tends to
guide tool along straight line.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
326187-D
72
Belt Punch
1/0/3
1.625
Unit
Cost
11.49 EA
SNIPS/ CUT ER S
Midwest Tool& Cutlery
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
329219-C
332492-B
332474-B
A13N
A11N
A9N
1-3/4" cut, 7" long
2-1/4" cut, 10" long
3" cut, 12-1/2" long
1/0/6
1/6/24
1/0/6
.450
1.000
1.600
Unit
Cost
Upright Snip - New ergonomic upright design improves wrist range
12.99 EA
14.99 EA
19.99 EA
motion. Allows for making overhead cuts easier.
Great for tight spaces. Cuts 24-gauge
rolled steel and 28-gauge stainless
steel. Vinyl-coated handles. 1-3/8" cut.
Made in U.S.A.
NOTE 1: Metalmaster Snips feature drop-forged jaws of wear-resistant special molybdenum steel
to provide extra service demanded by the compound lever action and to withstand the severe strain
of cutting heavy stock.
Save time by letting us locate those
hard-to-find items for you!
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315304-C
315313-C
P6900L
P6900R
Left cut
Right cut
1/6/36
1/6/36
1.139
1.139
Unit
Cost
24.99 EA
24.99 EA
10-91
HAND TOOLS
Product
No.
HAND TOOLS
SNIPS/CUTTERS
SNIPS /CUT E RS
SN IPS/ CUT ERS
Midwest Tool& Cutlery
Leatherman Tool
Do it Best® Snips - Regular or straight pattern. Recommended for
Surge™ Multi Tool - Surge™ is a multi tool powerhouse - built with
tough new pliers, longer blades, and easy-to-use
locks. A unique blade exchanger comes
with saw and diamond/wood file blades.
Large and small bit drivers include
double-ended bits. 4 outside-opening
blades give you quick access to the tools
you use most. With these new features,
plus Leatherman’s® strongest scissors yet,
Surge™ is sure to make a splash at the
work site. Powerful 4.5" design. Strongest pliers Leatherman® makes.
1-handed opening knife blades. All locking blades. Stainless steel. Belt
sheath included. Also includes needlenose pliers, regular pliers, wire
cutters, hard-wire cutters, stranded-wire cutters, electrical crimper,
clip-point knife, serrated knife, scissors, blade exchanger, diamond and
wood/metal file blade, saw blade, large bit driver, small bit driver, Phillips
No. 1-2 and screwdriver 3/16" bit, Phillips and flat tip eyeglasses
screwdriver bit, 5/16" screwdriver, driver, awl with thread loop, ruler (9"/
22cm), bottle/can opener, wire stripper, lanyard ring. 25-year limited
warranty.
those interested in a powerful snip for straight
cutting. Polished blades, green vinyl
coated handles. Made in U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
332562-C
332571-B
332580-C
332562
332571
332580
7" long, 1-3/4" cut, 1/2 lb.
10" long, 2-1/2" cut, 1 lb.
12-1/2" long, 3" cut, 1-5/8 lb.
1/6/36
1/6/36
1/6/36
.358
.713
1.176
Unit
Cost
10.49 EA
12.99 EA
17.99 EA
SNIPS /CUT E RS
Malco Prod.
Andy™ Aluminum Snips - Lightweight aluminum handles with
inlaid steel blades. 1/3 the weight of steel type snips. Aluminum
handles have reinforcing ribs for
increased strength. Steel blades are
electronically heat-treated and
tempered for continuous use. Precision
ground cutting edges. Blades are
resharpenable.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
805114-B
830160
Surge Multi Tool
1/0/24
1.170
Unit
Cost
99.99 EA
SN IPS/ CUT ERS
Leatherman Tool
Charge® XTI - Charge® XTI is the ultimate tool for the ambitious
Product
No.
Mfg.
No.
Description
351660-A
351679-A
M12
M14
15-1/2 oz., 12" long
24 oz., 14" long
Order
Mult.
Weight
1/0/3
1/0/3
1.000
1.500
Unit
Cost
24.99 EA
29.99 EA
SNIPS /CUT E RS
Leatherman Tool
Kick™ Multitool - Kick’s™ game is efficiency. Blades are longer,
sharper, stronger. A tapped screw allows the
choice of a pocket clip (sold separately)
instead of a belt sheath. 12 components:
Needlenose pliers, regular pliers, wire
cutters, hard-wire cutters, clip point knife,
large screwdriver, small screwdriver, Phillips
screwdriver, ruler (8"/19 cm), bottle/can
opener, wire stripper, lanyard attachment.
100% stainless steel. Tool with leather case.
Clamshell package. 5.2 oz. Closed length:
4". 25 year guarantee.
outdoorsman and demanding professional. The first
multitool with a cutting hook. 22 components: Titanium
handles, needlenose pliers, regular pliers, wire cutters,
hard-wire cutters, crimper, .154 cm clip point knife,
serrated knife, cutting hook, saw, wood/metal file,
diamond-coated file, 2 large bit drivers, small bit driver,
large screwdriver, ruler (8"/19 cm), bottle/can opener,
wire stripper, fixed lanyard ring, quick-release lanyard,
removable pocket clip, 9 doubled-ended bits, and screw
bits. Included screw bits: Phillips and flat tip eyeglass screwdriver,
screwdrivers 1/4" and 3/16", screwdriver 1/8" and Torx No. 15, Phillips No.
1 and No. 2, hex 3/32" and 5/64", hex 5/32" and 9/64", hex 1/16" and .050,
hex 1/8" and 7/64", Robertson No. 2 and No. 3. 100% stainless steel tool
with leather case. Titanium handles and bronze bushings. 8.3 oz. Closed
length: 4". 25 year warranty. Clamshell package.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
800058-B
830676
Charge Alx Multi-tool
1/0/24
1.163
Unit
Cost
129.99 EA
CUT ERS/ SCREWDRI VERS
Cooper Tools
Aluminum Handle Bolt Cutter - For cutting soft and medium hard
Product
No.
Mfg.
No.
800048-B
830018
Description
Order
Mult.
Weight
Kick Multi-tool
1/0/24
.981
Unit
Cost
37.99 EA
SNIPS /CUT E RS
Leatherman Tool
Blast™ Multitool - Blast™ is ready for work. Longer blades mean
easier slicing, sawing, filing, and more. Zytel handle
for comfort and grip. 17 components: Needlenose
pliers, regular pliers, wire cutters, hard-wire cutters,
clip point knife, wood/metal file, saw, scissors, large
screwdriver, small screwdriver, Phillips screwdriver,
small bit driver, ruler (8"/19 cm), bottle/can opener,
wire stripper, lanyard attachment, 1 double-ended bit.
Including eyeglass screwdriver. 100% stainless steel
tool with leather case. Clamshell package. 6.9 oz.
Closed length: 4". 25 year guarantee.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
362298-C
362301-C
362328-B
1490AC
0090AC
0190AC
14" long, 1/4" cut
18" long, 5/16" cut
24" long, 3/8" cut
1/5/10
1/5/10
1/5/10
2.100
3.100
4.000
Unit
Cost
41.99 EA
52.99 EA
69.99 EA
NOTE: Not for use on hard steel, reinforcing rod, hard bolts, stainless steel, hard wire rope, or
tempered spring wire.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
800057-B
830032
Blast Multi-tool
1/0/24
1.075
10-92
materials up to Brinell 300, Rockwell C31 hardness. Center cut
jaws for use where flush cuts are not
required. Alloy tool steel drop-forged
jaws, precision ground and heat-treated
for extra long cutting life. High-tech,
precision cast, aircraft grade aluminum
handles provide high-strength at half
the weight of traditional bolt cutters.
Unit
Cost
59.99 EA
We can become your single-source supplier
on many of the products you currently use!
HAND TOOLS
SNIPS/CUTTERS
SNI PS/CU T ERS
SCREWDRVI ERS
Center Cut Bolt Cutter - For cutting soft and medium hard
materials up to Brinell 300, Rockwell C31 hardness. Cuts hard
materials up to Brinell 400, Rockwell
C42 hardness. Center cut type of jaws
are recommended where flush cuts are
not required. Alloy tool steel
drop-forged jaws, precision ground and
heat-treated for maximum wear
resistance. Tubular steel arms.
Stubby Screwdriver - Round blade. Blade is 1-1/2", 1/4" in diameter.
Cooper Tools
Mfg.
No.
345898-C
0090MC
345905-B
0190MC
345914-C
0290MC
345923-B
0390MC
Description
18" long, 3/8" cut for soft or
medium hard materials, and
1/4" cut for hard materials
24" long, 7/16" cut for soft or
medium hard materials, and
5/16" cut for hard materials
30" long, 1/2" cut for soft or
medium hard materials, and
3/8" cut for hard materials
36" long, 9/16" cut for soft or
medium hard materials, and
7/16" cut for hard materials
Order
Mult.
Weight
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
356921-C
66-088
Stubby Screwdriver
1/6/36
.152
Unit
Cost
1/0/10
3.500
87.99 EA
1/0/5
5.200
99.99 EA
1/0/10
8.500
124.99 EA
0/0/1
13.000
154.99 EA Product
No.
Standard Blade With Standard Tip Screwdriver Ergonomic handle with nonslip textured grip. Alloy steel nickle-plated bar
for corrosion resistance and longer life.
Hardened tip for nonslip fit.
DIB Tool Imports
Mfg.
No.
312085-D
60-004
312094-D
60-006
Bolt Cutters - Economy priced hand tool. Heat-treated high-carbon
310951-D
310951
310942-E
310942
310817-E
310817
308218-E
308218
308226-D
308226
Description
14" long, 5/16" cut (soft), 3/
16" cut (hard)
18" long, 3/8" cut (soft), 1/4"
cut (hard)
24" long, 7/16" cut (soft), 5/
16" cut (hard)
30" long, 15/32" cut (soft), 5/
16" cut (hard)
36" long, 5/8" cut (soft), 7/
16" cut (hard)
Description
4" blade, 7-7/8" overall
length, 1/4" blade diameter
6" blade, 9-7/8" overall
length, 1/4" blade diameter
Order
Mult.
Weight
Unit
Cost
1/6/36
.229
2.29 EA
1/6/36
.386
2.29 EA
SCREWDRVI ERS
steel jaws and all steel tubular handles for
added strength with less weight.
Rubber grips. For cutting soft (grade 2)
and hard (grade 5) as noted below.
Mfg.
No.
5.49 EA
SCREWDRVI ERS
SNI PS/CU T ERS
Product
No.
Unit
Cost
Standard Cabinet Tip Screwdriver - Ergonomic handle with
nonslip textured grip. Alloy steel nickle-plated bar for corrosion resistance
and longer life. Hardened tip for nonslip
fit. Light blade, cabinet tip.
Order
Mult.
Weight
Unit
Cost
1/0/20
2.701
15.99 EA
1/0/10
4.299
19.99 EA
1/0/10
6.614
24.99 EA
1/0/5
11.023
29.99 EA
1/0/5
14.109
42.99 EA
Product
No.
Mfg.
No.
312174-D
60-003
312192-D
60-005
Description
3" blade, 6-7/8" overall
length, 3/16" blade diameter
6" blade, 9-7/8" overall
length, 3/16" blade diameter
Order
Mult.
Weight
Unit
Cost
1/6/36
.177
2.29 EA
1/6/36
.229
2.29 EA
SCREWDRVI ERS
NOTE: Not for use on hard steel, reinforcing rod, hard bolts, stainless steel, hard wire, or tempered
spring wire.
Standard Phillips Tip Screwdriver - Ergonomic handle with
nonslip textured grip. Alloy steel nickle-plated bar for corrosion resistance
and longer life. Hardened tip for nonslip
grip. Overall length: 7-7/8". Blade
length: 4".
SCREWDRI VERS
No. 2 Phillips Stubby Screwdriver - Round blade. Black oxide
Product
No.
Mfg.
No.
312851-C
60-001
312860-C
60-002
tip. Blade is 1-1/2", 1/4" in diameter. Overall length is 3-7/16".
Description
Point size: 1, blade diameter:
3/16"
Point size: 2, blade diameter:
1/4"
Order
Mult.
Weight
Unit
Cost
1/6/36
.188
1.99 EA
1/6/36
.247
1.99 EA
SCREWDRVI ERS
Standard Square Tip Screwdriver - Standard square tip with
ergonomic tri-lobular handle for superior torque and comfort.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
356913-C
65-905
#2 Phillips Screwdriver
1/6/36
.153
The product representations in this catalog are for reference only,
and are subject to change without notice.
Unit
Cost
5.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
326043-C
326472-C
60-015
60-016
No. 1 blade
No. 2 blade
1/6/36
1/6/36
.178
.192
Unit
Cost
4.99 EA
2.29 EA
10-93
HAND TOOLS
Product
No.
Overall length is 3-7/16".
HAND TOOLS
SCREWDRIVERS
SCREWDRI VERS
SC REWD RIVE RS
Phillips Screwdriver - Round blade. Black oxide tip.
6-Piece Screwdriver Set - Set includes 1 each: 4" slotted and 6"
slotted, 3" cabinet tip and 6" cabinet tip, No. 1 Phillips
and No. 2 Phillips.
Product
No.
Mfg.
No.
356883-C
65-901
356891-C
65-902
356905-C
65-903
Description
3" blade, 6-3/4" length
overall, 1/4" blade diameter,
point size: 1
4" blade, 6-5/16" length
overall, 1/4" blade diameter,
point size: 2
6" blade, 10-13/16" length
overall, 5/16" blade
diameter, point size: 3
Order
Mult.
Weight
Unit
Cost
1/6/36
.208
5.29 EA
1/6/36
.303
5.99 EA
1/6/36
.442
9.49 EA
SCREWDRI VERS
Standard Screwdriver - Round blade.
Product
No.
Mfg.
No.
Description
396168-B
66-565
6pc Screwdriver Set
Order
Mult.
Weight
1/0/6
1.667
Unit
Cost
19.99 SET
NOTE 1: Contractor Grade Rubber Grip Screwdrivers have a Full size rubber cushion-grip handle.
Forged boron steel tips, fully hardened and tempered. Bolster construction for extra strength. Tips
machine ground to size for nonslip fit in screw slot. Chrome-plated to resist rust. Carded.
Product
No.
Mfg.
No.
356948-C
66-090
356956-C
66-091
356964-C
66-092
Description
4" blade, 8-1/4" overall
length, 1/4" blade diameter
6" blade, 10-15/16" overall
length, 5/16" blade diameter
8" blade, 13-3/8" overall
length, 3/8" blade diameter
Order
Mult.
Weight
Unit
Cost
1/6/24
.446
6.99 EA
1/6/24
.446
7.79 EA
1/6/24
.679
9.49 EA
NOTE 1: Stanley® cushion-grip screwdrivers have ergonomically designed, bi-material handles for
maximum comfort. the tri-lobe handle fits hand comfortably. High-quality, heat-treated plated bars
for lasting pro performance and rust resistance.
SC REWD RIVE RS
Klein Tools
Round Shank Screwdriver - Heavy-duty round shank.
Cushion-grip handle helps resist slippage. Heat-treated tempered steel
blade is chrome-plated with black
keystone tip. Bolster on blade at handle
provides added strength and rigidity.
Handle top is inscribed with tip
description symbol. Bulk.
SCREWDRI VERS
Cabinet Screwdriver - Round blade.
Product
No.
Mfg.
No.
356999-C
66-096
357006-C
66-097
Description
3" blade, 6-3/4" overall
length, 3/16" blade diameter
6" blade, 9-3/4" overall
length, 3/16" blade diameter
Order
Mult.
Weight
1/6/36
.216
Product
No.
Mfg.
No.
318299-C
602-3
318396-B
602-4
318418-C
602-6
Unit
Cost
5.79 EA
Description
3" blade, 6-3/4" length, 7/32"
shank tip, slotted
4" blade, 8-11/32" length, 1/
4" shank tip, slotted
6" blade, 10-15/16" length
Order
Mult.
Weight
Unit
Cost
1/0/6
.217
8.79 EA
1/0/6
.293
9.29 EA
1/0/6
.406
11.49 EA
SC REWD RIVE RS
1/6/36
.355
6.29 EA
Klein Tools
Square Shank Screwdriver - Heavy-duty square shank for
SCREWDRI VERS
Standard TORX® 4-Piece Screwdriver Set - Ergonomically
designed handle for comfortable grip. Alloy steel nickel protected blades
for long life. Hardened tips for slip-resistant fit. 4-piece set includes: T10,
T15, T20, and T25.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
326105-B
60-042
4pc Torx Screwdriver Set
1/6/36
.106
Unit
Cost
wrench-assisted turning. Cushion-grip handle helps resist slippage.
Heat-treated, tempered steel blade is
chrome-plated with black keystone tip.
Bolster on blade at handle provides
added strength and rigidity. Handle top
is inscribed with tip description symbol. Bulk.
Product
No.
Mfg.
No.
318221-C
600-4
318272-C
600-6
9.99 EA
Description
4" blade, 8-11/32" length, 1/
4" shank tip, slotted
6" blade, 10-15/16" length, 5/
16" shank tip, slotted
Order
Mult.
Weight
Unit
Cost
1/0/6
.311
9.99 EA
1/0/6
.444
11.99 EA
SC REWD RIVE RS
Klein Tools
Cabinet Tip Screwdriver - Tip no wider than shank for recessed
holes and tight spaces. Cushion-grip handle helps reduce
slippage. Heat-treated, tempered steel
blade is chrome-plated with black
slotted tip. Handle top is inscribed with
tip description symbol. Bulk.
Product
No.
Mfg.
No.
318442-C
601-3
Description
3" blade, 6-3/4" length, 3/16"
shank tip
Order
Mult.
Weight
1/0/6
.192
Unit
Cost
7.49 EA
Continued Next Column
10-94
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
SCREWDRIVERS
Continued From Previous Column
Mfg.
No.
318469-C
601-4
318477-B
601-6
318485-B
601-8
318426-C
605-4
318434-C
605-6
Description
4" blade, 7-3/4" length, 3/16"
shank tip
6" blade, 9-3/4" length, 3/16"
shank tip
8" blade, 11-3/4" length, 3/
16" shank tip
Heavy-duty, 4" blade, 8-11/
32" length, 1/4" shank tip
Heavy-duty, 6" blade, 10-11/
32 length, 1/4" shank tip
Order
Mult.
Weight
Unit
Cost
1/0/6
.203
7.79 EA
1/0/6
.221
8.29 EA
1/0/6
.233
8.99 EA
1/0/6
.292
8.79 EA
1/0/6
.320
9.49 EA
SCREWDRI VERS
Klein Tools
Phillips Screwdriver - Tips are Profilated® to provide a more exact
Phillips-tip profile for a better, tighter fit
than conventional Phillips screwdrivers.
Cushion-grip handle helps reduce hand
slippage. Heat-treated, tempered steel
blade is chrome-plated with black tip.
Handle top is inscribed with tip description symbol. Bulk.
Product
No.
Mfg.
No.
318507-C
318515-B
603-3
603-4
318523-C
382027-C
603-6
603-7
382035-C
603-10
Description
No. 1, 3" blade, 6-3/4" length
No. 2, 4" blade, 8-5/16"
length
No. 3, 6" blade, 11" length
No. 2, 7" blade, 11-5/16"
overall
No. 2, 10" blade, 14-5/16"
overall
Order
Mult.
Weight
Unit
Cost
1/0/6
1/0/6
.191
.292
7.49 EA
8.49 EA
1/0/6
1/0/6
.417
.317
11.49 EA
9.79 EA
1/0/6
.167
10.99 EA
SCREWDRI VERS
Klein Tools
Klein Tools
7-Piece Screwdriver Set - Cushion-grip screwdrivers in reclosable
seal-tight vinyl pouch. Includes the following
screwdrivers: model No. 600-4 square shank
with keystone tip, 602-6 round shank with
keystone tip, 601-3 round shank with cabinet
tip, 601-6 round shank with cabinet tip, 605-4
round shank with cabinet tip, 603-3 round
shank with No. 1 Phillips tip, and 603-4
round shank with No. 2 Phillips tip. Model
No. 600-4, 602-6, and 605-4 are heavy-duty
models.
Product
No.
Mfg.
No.
Description
335894-B
85076
7pc Screwdriver Set
Order
Mult.
Weight
0/0/1
1.900
Unit
Cost
49.99 EA
SCREWDRVI ERS
Klein Tools
Continuity Tester - Tests for continuity of circuit with power off. Bulb
in handle glows when circuit is complete.
Quickly reveals shorts or broken
circuits. Has pointed 3-3/4" pointed
probe and 4" plastic handle with
removable nylon cap that holds
replaceable bulb (model No. 69131)
and "AAA" battery (not included). 36"
test lead with fully insulated alligator
clip. Overall length from probe to clip is 43-3/4". Carded.
Rotary Screwdriver - Rapi-Driv®. Crank-action handle spins screws
Product
Mfg.
Order
Unit
fast with 1-hand. Shank rotates in handle to save
No.
No.
Description
Mult.
Weight
Cost
time and effort. Ideal for use with switch
317934-C
69133
Continuity Tester
1/0/3
.283
13.79 EA
plates, light fixtures, etc. Cushion-grip
handle helps reduce slippage.
Klein Tools
Heat-treated, tempered steel blade is
Low Voltage Circuit Tester - For checking live 6 to 24V AC or DC
chrome-plated. Handle top is inscribed with tip description symbol.
circuits. Bulb in handle glows when circuit is complete. Has
Carded.
pointed 3-3/4" probe and 4" plastic
Product
Mfg.
Order
Unit
handle with nylon top that holds
No.
No.
Description
Mult.
Weight
Cost
333891-C
682-6
No. 2, 6" blade, 9-3/4" overall
1/0/6
.038
10.79 EA replaceable bulb (model No. 69130).
333948-C
670-6
6" blade, 9-3/4" length, 3/16"
1/0/6
.033
10.49 EA 36" test lead with fully insulated alligator
shank tip
clip. Overall length from probe to clip is
43-3/4". Carded.
SCREWDRVI ERS
SCREWDRI VERS
Klein Tools
10-In-1 Screwdriver and Nutdriver - Cushion-grip handle with
interchangeable snap-in blades. Includes: No. 2 Phillips with 1/4"
slotted, No. 1 Phillips with 3/16" slotted, No. 15
Torx® with No. 10 Torx®, and No. 1 square with No.
2 square. Reversible bit holder also works as 1/4"
and 5/16" nutdriver.
Product
No.
Mfg.
No.
Description
335967-B
32477
10-in-1 Screwdriver
Some products shown may need to be special ordered
for your convenience!
Order
Mult.
Weight
1/0/6
.458
Product
No.
Mfg.
No.
Description
317969-C
69127
Low-volt Tester
Order
Mult.
Weight
1/0/3
.300
Unit
Cost
14.99 EA
SCREWDRVI ERS
General Tools
Unit
Cost
Jewelers Screwdriver - 1 screwdriver and 5 blades in plastic case.
Order full case of 10 and receive a pre-loaded
clip-strip.
15.99 EA
Product
No.
Mfg.
No.
Description
311870-D
S-605CP
Jeweler Screwdriver
Order
Mult.
Weight
1/0/5
.103
Unit
Cost
7.99 SET
10-95
HAND TOOLS
Product
No.
SCREWDRVI ERS
HAND TOOLS
SCREWDRIVERS
SCREWDRI VERS
SC RATCH AWL/ NUTDRIVER
10-In-1 Screwdriver - Oversized green handle. Double ended
Offset Ratchet Screwdriver - Overall length 3-7/8". Blade length:
chrome-plated tube. Industrial quality, maximum versatility.
Contains No. 1 and No. 2 Phillips, 3/16" x 1/4" slotted, No.
T15 and T20 Torx®, and No. 1 and No. 2 square recess.
Cardboard counter display of 12.
1/4".
Product
No.
Mfg.
No.
319929-C
68-402
Description
1/4" standard and 2-point
Phillips
Order
Mult.
Weight
1/0/6
.100
Unit
Cost
13.99 EA
SC RATCH AWL
Multi-Bit Ratchet Screwdriver - 3-position (forward, reverse, and
fixed) ratcheting mechanism. Includes 10 bits for different
applications: No. 1 and No. 2 Phillips, 3/
Product
Mfg.
Order
Unit
No.
No.
Description
Mult.
Weight
Cost
16" and 1/4" slotted, T10 and T15
382272-C
88103
10-in-1 Screwdriver
12/0/120
.375
7.49 EA Torx®, No. 1 and No. 2 square recess,
No. 1 and No. 2 pozi-drive. Tri-lobular,
bi-material handle with textured finish for maximum torque and minimum
Laser Pointer - Projects a red laser dot up to 1500’. Ideal for teachers, effort. Magnetic bit holder for quick, secure change-over of bits. Patented
demonstrations, construction sites, and
bit storage system for easy visibility, access, and security.
lectures. Small design with key chain
Product
Mfg.
Order
Unit
attachment for easy carrying. Aircraft
No.
No.
Description
Mult.
Weight
Cost
aluminum construction for long life. 3
302120-C
68-010
Ratchet Screwdriver
1/6/36
.367
18.99 EA
batteries (model No. LR44 button cell)
included. Carded.
SCREWDRI VERS
SC RATCH AWL
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
313653-C
06007
Laser Pointer
1/6/48
.250
Unit
Cost
14.99 EA
Scratch Awl - Needle point oil tempered blade 3-1/4" x 7/32".
Unbreakable amber handle.
SCREWDRI VERS
6-In-1 Ratcheting Screwdriver - Ratchet action, forward and
reverse. 6 tips stored in tool. Self-lubricating metal ratchet
mechanism. Butyrate inner handle, vinyl grip outer handle.
Includes No. 1 and No. 2 Phillips bits, 3/16" and 1/4" slotted bits,
No. 1 and No. 2 square recess bits. Carded.
Product
No.
Mfg.
No.
314668-C
63600
Description
Order
Mult.
Weight
6-in-1 Screwdriver
1/0/10
.833
Unit
Cost
12.49 EA
SCREWDRI VERS
Offset Phillips And Slotted Screwdriver - Overall length:
3-15/16". 1/4" blade.
Product
No.
Mfg.
No.
313208-C
319910-C
65-032
65-033
10-96
Description
Phillips 1 and 2-point
1/4" slotted and 2-point
Phillips.
Order
Mult.
Weight
1/6/72
1/0/6
.094
.092
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
311610-D
SC3C
Scratch Awl
1/12/144
.136
Unit
Cost
2.29 EA
SC RATCH AWL
Scratch Awl - Tempered steel bar anchored in hardwood handle by 2
wings swaged on the shank. Bar finished bright
and smooth. Nickel-plated ferrule. Bar
diameter 3/16", bar length 3-1/2".
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
311629-C
69-122
Scratch Awl
1/6/72
.135
Unit
Cost
6.29 EA
Unit
Cost
4.29 EA
4.49 EA
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
*SK HAND TOOL
TO OL
HAND TOOLS
*SK HAND
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
10-97
HAND TOOLS
*SK HAND TOOL
*SK HAND
10-98
TO OL
Your representative can give you details
on product availability and shipping requirements!
HAND TOOLS
*SK HAND TOOL
TO OL
HAND TOOLS
*SK HAND
Service is our priority!
Our commitment is to meet your needs!
10-99
HAND TOOLS
*SK HAND TOOL
*SK HAND
10-100
TO OL
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
*SK HAND TOOL
TO OL
HAND TOOLS
*SK HAND
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
10-101
HAND TOOLS
*SK HAND TOOL
*SK HAND
10-102
TO OL
Save time by letting us locate those
hard-to-find items for you!
HAND TOOLS
*SK HAND TOOL
TO OL
HAND TOOLS
*SK HAND
We can become your single-source supplier
on many of the products you currently use!
10-103
HAND TOOLS
*SK HAND TOOL
*SK HAND
10-104
TO OL
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
*SK HAND TOOL
TO OL
HAND TOOLS
*SK HAND
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
10-105
HAND TOOLS
*SK HAND TOOL
*SK HAND
10-106
TO OL
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
*SK HAND TOOL
TO OL
HAND TOOLS
*SK HAND
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
10-107
HAND TOOLS
*SK HAND TOOL
*SK HAND
10-108
TO OL
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
*SK HAND TOOL
TO OL
HAND TOOLS
*SK HAND
Your representative can give you details
on product availability and shipping requirements!
10-109
HAND TOOLS
*SK HAND TOOL
*SK HAND
10-110
TO OL
Service is our priority!
Our commitment is to meet your needs!
HAND TOOLS
*SK HAND TOOL
TO OL
HAND TOOLS
*SK HAND
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
10-111
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-112
TO OL
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
Save time by letting us locate those
hard-to-find items for you!
10-113
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-114
TO OL
We can become your single-source supplier
on many of the products you currently use!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
The product representations in this catalog are for reference only,
and are subject to change without notice.
10-115
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-116
TO OL
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
Some products shown may need to be special ordered
for your convenience!
10-117
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-118
TO OL
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
10-119
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-120
TO OL
Your representative can give you details
on product availability and shipping requirements!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
Service is our priority!
Our commitment is to meet your needs!
10-121
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-122
TO OL
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
10-123
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-124
TO OL
Save time by letting us locate those
hard-to-find items for you!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
We can become your single-source supplier
on many of the products you currently use!
10-125
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-126
TO OL
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
10-127
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-128
TO OL
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
10-129
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-130
TO OL
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
Your representative can give you details
on product availability and shipping requirements!
10-131
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-132
TO OL
Service is our priority!
Our commitment is to meet your needs!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
10-133
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-134
TO OL
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
Save time by letting us locate those
hard-to-find items for you!
10-135
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-136
TO OL
We can become your single-source supplier
on many of the products you currently use!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
The product representations in this catalog are for reference only,
and are subject to change without notice.
10-137
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-138
TO OL
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
*WRIGHT TOOL
TO OL
HAND TOOLS
*WRIG HT
Some products shown may need to be special ordered
for your convenience!
10-139
HAND TOOLS
*WRIGHT TOOL
*WRIG HT
10-140
TO OL
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
NUT DRIVERS
NUT DRVI ERS
SOCKET SETS
Klein Tools
S K Hand Tool
Nut Driver - Cushion-grip, hollow shaft nut driver. Amber plastic handle. 15-Piece SuperKrome Metric Combination Wrench Set Handle caps are color-coded for easy
size identification. Shafts are made of
heat-treated, chrome-plated tempered
steel.
Mfg.
No.
Description
377279-B
377287-C
377295-B
377309-C
377317-C
377325-C
377333-B
377341-B
377368-B
630-3/16
630-1/4
630-5/16
630-11/32
630-3/8
630-7/16
630-1/2
630-9/16
630-5/8
3/16"
1/4"
5/16"
11/32"
3/8"
7/16"
1/2"
9/16"
5/8"
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
.167
.167
.167
.167
.167
.167
.167
.167
.167
Unit
Cost
Mfg.
Order
7.29 EA Product
No.
Description
Mult.
Weight
7.49 EA No.
7.49 EA 334739-B
86265
15pc Mt 12pt Cmb Wrench
1/0/5
5.000
7.79 EA
7.79 EA
8.79 EA
9.29 EA
11.99 EA The patented SureGrip hex design, which drives the side of the
12.79 EA
Unit
Cost
134.99 EA
SOCKET SETS
S K Hand Tool
13-Piece 1/4" Drive Fractional Palm Control Socket Set -
NUT DRVI ERS
Klein Tools
Nut Driver Set - 7-piece set. Cushion-grip, hollow shaft nut drivers.
Amber plastic handle. Handle caps are
color-coded for easy identification. Shafts are
made of heat-treated, chrome-plated tempered
steel. Includes: 3/16", 1/4", 5/16", 11/32", 3/8",
7/16", and 1/2".
fastener,
not the corner. High polish SuperKrome
plating finish, providing long life and
maximum corrosion resistance. 3/16" 9/16" 6-point standard sockets,
universal joint, 1/48" Female - 3/8" Male
adapter, palm control ratchet. Packaged on a green SureGrip® nylon
spring-loaded ball retention clip rail with ratchet holder.
Product
No.
Mfg.
No.
Description
334784-B
4923
1/4" Std 6pt Fr 13pc Set
Order
Mult.
Weight
1/0/5
1.000
Unit
Cost
72.99 EA
SOCKET SETS
S K Hand Tool
44-Piece 1/4" Drive 6-Point Fractional and Metric
Socket Set - The patented SureGrip hex design drives the side of the
Product
No.
Mfg.
No.
Description
377376-B
631
7pc Nut Driver Set
Order
Mult.
Weight
1/2/6
1.000
Unit
Cost
47.99 EA
SOCKE TSETS
S K Hand Tool
15-Piece SuperKrome Fractional Combination Wrench
Set - The patented SureGrip hex design on wrench box ends drives the
side of the fastener, not the corner.
High polish SuperKrome plating finish,
providing long life and maximum
corrosion resistance. 12-point - 1/4", 9/
32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/
16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/
16", 1" (new - 9/32" and 11/32" 12-point
wrenches). Packaged in a rack.
Product
No.
Mfg.
No.
Description
334720-A
86255
15pc Fr 12pt Cmb Wrench
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
Order
Mult.
Weight
1/0/5
6.200
fastener, not the corner. High polish
SuperKrome plating results in a
jewelry-like finish, providing long life
and maximum corrosion resistance.
4.5" Pro ratchet; 2", 6" extensions; 3/
16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/
8", 7/16", 1/2", 9/16" standard sockets;
1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/
2", 9/16" deep sockets; 4mm, 5mm,
5.5mm, 6mm, 7mm, 8mm, 9mm,
10mm, 11mm, 12mm, 13mm, 14mm,
15mm standard sockets; 6mm, 7mm,
8mm, 9mm, 10mm, 11mm, 12mm,
13mm, 14mm, 15mm deep sockets. Packaged in a molded plastic case.
Product
No.
Mfg.
No.
Description
334668-A
91844
1/4" 44pc Dp Socket Set
Order
Mult.
Weight
1/0/5
4.100
Unit
Cost
154.99 EA
Unit
Cost
129.99 EA
10-141
HAND TOOLS
Product
No.
The patented SureGrip hex design on wrench box ends drives the side of
the fastener, not the corner. High polish
SuperKrome plating finish, providing
long life and maximum corrosion
resistance. 12-point - 8mm, 9mm,
10mm, 11mm, 12mm, 13mm, 14mm,
15mm, 16mm, 17mm, 18mm, 19mm,
20mm, 21mm, 22mm wrenches.
Packaged in a rack.
HAND TOOLS
SOCKET SETS
SOCKET SETS
SO CKET SETS
S K Hand Tool
Danaher Tool Group
47-Piece 3/8" Drive 6-Point Fractional and Metric
12-Piece 3/8" Drive - Includes 8" quick release ratchet, 3" and 6"
Socket Set - The patented SureGrip hex design drives the side of the extension, 5/8" spark plug socket, eight 12-point
sockets in sizes: 3/8", 7/16", 1/2", 9/16",
fastener, not the corner. High polish
5/8", 11/16", 3/4", and 13/16". Packed in
SuperKrome plating results in a
a metal box. Made in U.S.A.
jewelry-like finish, providing long life
and maximum corrosion resistance.
7.5" Pro ratchet; 3", 6" extensions; 1/4",
5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/
16", 3/4", 13/16", 7/8" standard sockets;
3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/
4", 13/16", 7/8" deep sockets; 6mm,
7mm, 8mm, 9mm, 10mm, 11mm,
Product
Mfg.
Order
Unit
No.
No.
Description
Mult.
Weight
Cost
12mm, 13mm, 14mm, 15mm, 16mm,
318566-B
19113
12pc 3/8" Socket Set
0/0/1
2.500
54.99 SET
17mm, 18mm, 19mm standard sockets;
10mm, 11mm, 12mm, 13mm, 14mm,
15mm, 16mm, 17mm, 18mm, 19mm deep sockets. Packaged in a molded Danaher Tool Group
plastic case.
18-Piece 3/8" Drive Socket Set - Includes 8" quick release
ratchet, 3" and 6" extension, 5/8" spark plug socket, seven 12-point
Product
Mfg.
Order
Unit
No.
No.
Description
Mult.
Weight
Cost
standard sockets in sizes: 3/8", 7/16", 1/2",
334702-B
94547
3/8" Std/dp 6pt 47pc Set
1/0/5
8.800
194.99 EA 9/16", 5/8", 11/16", 3/4", seven 12-point
deep sockets in sizes: 3/8", 7/16", 1/2", 9/
S K Hand Tool
16", 5/8", 11/16", and 3/4". Packed in a
metal box. Made in U.S.A.
47-Piece 3/8" Drive 12-Point Fractional and Metric
SO CKET SETS
SOCKET SETS
Socket Set - The patented SureGrip hex design drives the side of the
fastener, not the corner. High polish
SuperKrome plating results in a
jewelry-like finish, providing long life
and maximum corrosion resistance.
7.5" Pro ratchet; 3", 6" extensions; 1/4",
5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/
16", 3/4", 13/16", 7/8" standard sockets;
3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/
4", 13/16", 7/8" deep sockets; 6mm,
7mm, 8mm, 9mm, 10mm, 11mm,
12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm standard
sockets; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm,
18mm, 19mm deep sockets. Packaged in a molded plastic case.
Product
No.
Mfg.
No.
Description
334711-B
94547-12
3/8" Fr/mt 12pt 47pc Set
Order
Mult.
Weight
1/0/5
8.800
Product
No.
Mfg.
No.
Description
352500-B
19123
18pc 3/8" Socket Set
Order
Mult.
Weight
0/0/1
4.600
Unit
Cost
79.99 SET
SO CKET SETS
Danaher Tool Group
10-piece 3/8" Drive Socket Set - Includes 3/8" round head
ratchet, nine 12-point sockets in sizes: 5/16", 3/8", 7/16", 1/2", 9/16",
5/8", 11/16", 3/4", 13/16", and socket rail. Sockets
feature Allendrive® for greater gripping power.
Clamshell package. Made in U.S.A.
Unit
Cost
194.99 EA
SOCKET SETS
Danaher Tool Group
12-Piece 1/4" Socket Set - Professional quality 6-point socket set
contains the following 1/4" drive socket sizes 3/16",
7/32", 1/4", 9.32", 5/16", 11/32", 3/8", 7/16", and
1/2". 1/4" drive ratchet. 1/4" drive. 3" drive
extension. Made in U.S.A.
Product
No.
Mfg.
No.
Description
310476-B
19140
10pc 3/8" Socket Set
Order
Mult.
Weight
0/0/1
1.733
Unit
Cost
37.99 SET
SO CKET SETS
Danaher Tool Group
11-Piece 3/8" Drive Socket Set - Includes 3/8" drive quick
release ratchet, 3" extension, 5/8" spark plug socket, eight 12-point
sockets in sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8",
11/16", and 3/4". Made in U.S.A.
Product
No.
Mfg.
No.
Description
391220-C
19250
12pc 1/4 Dr Socket Set
10-142
Order
Mult.
Weight
0/0/1
1.500
Unit
Cost
42.99 SET
Product
No.
Mfg.
No.
Description
347485-C
19100
11pc 3/8" Socket Set
Order
Mult.
Weight
0/0/1
1.220
Unit
Cost
47.99 SET
Your representative can give you details
on product availability and shipping requirements!
HAND TOOLS
SOCKET SETS
SOCKE TSETS
SOCKET SETS
Danaher Tool Group
Danaher Tool Group
17-Piece 3/8" And 1/4" Drive Socket Set - Includes 3/8" quick 23-Piece 1/2" Drive Socket Set - Includes 10" quick release
release ratchet, 3" - 3/8" drive extension, 3/8 F x 1/4 M adapter, 5/8" spark
plug socket, 1/4 drive 12-point sockets
in sizes: 3/16", 7/32", 1/4", 9/32", 5/16",
11/32"; 3/8 drive sockets in sizes: 3/8",
7/16" 1/2", 9/16", 5/8", 11/16", and 3/4".
Made in U.S.A.
Mfg.
No.
Description
347442-C
19600
17pc 3/8" Socket Set
Order
Mult.
Weight
0/0/1
3.000
Unit
Cost
62.99 SET Product
No.
Mfg.
No.
Description
19210
23pc 1/2" Socket Set
Order
Mult.
Weight
Unit
Cost
0/0/1
12.420
159.99 SET
SOCKE TSETS
Danaher Tool Group
352519-C
20-Piece 3/8" Drive SAE/Metric Socket Set - Includes 3/8"
drive ratchet. 3/8" drive 3" extension. 3/8" drive 5/8" spark plug socket. 3/8"
drive SAE 6-point sockets in sizes: 3/8",
7/16", 1/2", 9/16", 5/8", 11/16", 3/4", and
11/16". 3/8" drive metric sockets in sizes:
8mm, 9mm, 10mm, 11mm, 12mm,
13mm, 14mm, 16mm, and 18mm. Made
in U.S.A.
Product
No.
Mfg.
No.
Description
391239-B
19251
20pc 3/8 Dr Socket Set
Order
Mult.
Weight
0/0/1
3.000
Unit
Cost
SOCKET SETS
Danaher Tool Group
37-Piece 3/8" and 1/4" SAE And Metric Drive Socket Set
- Includes 1/4" drive SAE 6-point sockets in sizes: 5/32", 3/16", 7/32", 1/4",
9/32", 5/16", 11/32", 3/8", and 7/16". 1/4"
6-point drive sockets in sizes: 4mm, 5mm,
6mm, 7mm, 8mm, 9mm, 10mm, and 11mm. 1/
4" drive spinner handle. 3/8" drive SAE
12-point deep sockets in sizes: 3/8", 7/16", 1/
2", 9/16", 5/8", 11/16", 3/4", and 13/16". 3/8"
drive sockets in sizes: 10mm, 11mm, 12mm,
13mm, 14mm, 15mm, 16mm, 17mm, 19mm,
and 21mm. 3/8" drive ratchet. 3/8" drive 3/8" to
1/4" reducing adapter. Drive 6-point spark plug
sockets: 5/8" and 13/16". 3/8" drive 3"
extensions. 3/8" drive round head ratchet.
Made in U.S.A.
45.99 SET Product
No.
Mfg.
No.
Description
19252
37pc 1/4&3/8 Socket Set
Order
Mult.
Weight
0/0/1
3.940
Unit
Cost
SOCKE TSETS
Danaher Tool Group
391247-C
12-Piece 1/2" Drive Socket Set - Professional quality socket set
contains the following 1/2" drive 12-point socket sizes: 7/16",
1/2", 9/16", 5/8", 11/16", 3/4", 7/8", and
15/16". 1/2" drive ratchet. 6" and 3"
drive extension. Made in U.S.A.
Product
No.
Mfg.
No.
Description
391255-C
19253
12pc 1/2dr Socket Set
Order
Mult.
Weight
0/0/1
4.200
Unit
Cost
57.99 SET
SOCKE TSETS
Danaher Tool Group
16-Piece 1/2" Drive Socket Set - Includes 10" quick release
ratchet, 15" flex handle, 6" extension, thirteen 12- point sockets in
sizes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4",
13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", and
1-1/4". Packed in a metal box. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
352527-B
19211
16pc 1/2" Socket Set
Service is our priority!
Our commitment is to meet your needs!
Order
Mult.
Weight
Unit
Cost
0/0/1
6.860
114.99 SET
57.99 SET
SOCKET SETS
Danaher Tool Group
57-Piece 3/8" Drive SAE/Metric Socket Set - Includes 3/8"
drive ratchet, 1/4" drive spinner handle, 1/4" drive 2" extension, 3/8" drive
3" extension. 3/8" drive 6" extension, 3/8" F
x 1/4" M adapter, 3/8" drive 5/8" spark plug
socket. 1/4" drive SAE 6-point sockets in
sizes: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16",
11/32", 3/8", 7/16", 1/2". 1/4" drive metric
6-point sockets in sizes: 4mm, 5mm, 6mm,
7mm, 8mm, 9mm, 10mm, 11mm, 12mm,
13mm. 3/8" drive SAE 12-point sockets in
sizes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/
4", 13/16". 3/8" drive SAE 12-point deep
sockets in sizes: 3/8", 7/16", 1/2", 9/16", 3/
4". 3/8" drive metric 12-point sockets in
sizes: 9mm, 10mm, 11mm, 12mm, 13mm,
14mm, 15mm, 16mm, 17mm, 19mm. Short
arm hex key in sizes: 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4". Packed in
a high-density polyethylene carrying case. Convenient storage
compartment in carrying case lid for additional tools, fasteners, and more.
Product
No.
Mfg.
No.
Description
365955-C
19125
57pc 3/8" Socket Set
Order
Mult.
Weight
0/0/1
10.500
Unit
Cost
94.99 SET
10-143
HAND TOOLS
Product
No.
ratchet, 15" flex handle, 6" extension, three 6-point standard sockets
in sizes: 7/16", 1/2", 9/16", ten 12-point
standard sockets in sizes: 5/8", 11/16",
3/4", 13/16", 7/8", 15/16", 1", 1-1/16",
1-1/8", 1-1/4", seven 12-point deep
sockets in sizes: 1/2", 9/16", 5/8", 11/
16", 3/4", 13/16", and 7/8". Packed in a
metal box. Made in U.S.A.
HAND TOOLS
SOCKET SETS
SOCKET SETS
AL EN SOC KETS
Danaher Tool Group
Danaher Tool Group
Socket Holder Rack - Each socket holder rack available individually. 1/4" Drive Spinner Handle - 6" long. High-impact plastic handle.
Each rack holds 16 sockets.
Product
No.
Mfg.
No.
Description
318582-C
319171-D
319163-C
2530
2531
2532
For 1/4" sockets
For 3/8" sockets
For 1/2" sockets
Heat-treated and tempered alloy steel. Chrome plated with
diamond knurled handle.
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
.500
.500
.500
Unit
Cost
4.79 EA
4.79 EA
4.79 EA
AL ENSO CKETS
Danaher Tool Group
Product
No.
Mfg.
No.
Description
301284-C
10820
1/4" Drive Flex Handle
Order
Mult.
Weight
0/0/1
.333
Unit
Cost
15.79 EA
AL EN SOC KETS
Danaher Tool Group
1/4" Drive Flexible Spinner Handle - 6" long. Spinner handle
with a flexible shaft to clear obstructions.
Socket Holder Rack Set - Neatly stores 1/4", 3/8", and 1/2" square
drive sockets. Mount on wall or in tool box. Each holder
holds 16 sockets on movable clips.
All steel construction.
Product
No.
Mfg.
No.
Description
301328-D
10840
6" Spin Flex Handle
Order
Mult.
Weight
0/0/1
.250
Unit
Cost
13.49 EA
AL EN SOC KETS
Product
No.
Mfg.
No.
Description
318574-D
2533
3pc Socket Holder Set
Order
Mult.
Weight
0/0/1
.500
Unit
Cost
13.99 SET
Danaher Tool Group
1/4" Drive Extension - Use with flex handle or ratchet.
AL ENSO CKETS
Danaher Tool Group
1/4" Drive Ratchet - Quick release ratchet features Allen’s patented
Torque-Wrap™ design for maximum strength.
Single hand reversing for easier
operation. Overall length: 5-1/2".
Product
No.
Mfg.
No.
Description
301186-C
10800
1/4" Qr Ratchet
Order
Mult.
Weight
0/0/1
.667
Unit
Cost
21.49 EA
Product
No.
Mfg.
No.
Description
301300-C
326873-D
10805
10810
3"
6"
Order
Mult.
Weight
0/0/1
0/0/1
.167
.167
Unit
Cost
4.49 EA
6.29 EA
AL EN SOC KETS
Danaher Tool Group
Increasing Adapter - 1/4" Female, 3/8" Male.
AL ENSO CKETS
Danaher Tool Group
1/4" Drive Ratchet - Round head design provides same torque
strength and durability as teardrop-shaped ratchet. Nonquick
release head. Length: 5".
Product
No.
Mfg.
No.
Description
311596-C
10801
1/4" Round Ratchet
Order
Mult.
Weight
0/0/1
.260
Unit
Cost
15.99 EA
Product
No.
Mfg.
No.
Description
350664-C
10825
1/4fx3/8m Adapter
Order
Mult.
Weight
0/0/1
.040
Order
Mult.
Weight
0/0/1
.042
Unit
Cost
6.29 EA
AL EN SOC KETS
Danaher Tool Group
Universal Joint - 1/4" drive.
AL ENSO CKETS
Danaher Tool Group
1/4" Drive Spinner Handle - 6" long. 1/4" square recess in handle
permits use as extension bar.
Product
No.
Mfg.
No.
Description
326917-D
10815
6" 1/4 Spinner Handle
10-144
Order
Mult.
Weight
0/0/1
.208
Product
No.
Mfg.
No.
Description
326855-C
10830
1/4" Universal Joint
Unit
Cost
12.99 EA
Unit
Cost
8.99 EA
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
ALLEN SOCKETS
ALEL NSO CKETS
Danaher Tool Group
Danaher Tool Group
1/4" Drive Sockets - 6-point sockets with Allendrive™ feature for
9-Piece 1/4" Drive Deep Metric Socket Set - Sockets feature:
Allendrive™ for greater gripping power. Chamfered openings provide fast,
positive positioning. Set includes
6-point deep sockets in sizes: 6mm,
7mm, 8mm, 9mm, 10mm, 11mm,
12mm, 13mm, 14mm, and socket rail.
Clamshell package. Made in U.S.A.
greater gripping power. Chamfered openings provide fast,
positive positioning. Made in U.S.A.
Product
No.
Mfg.
No.
Description
326668-D
313654-D
326677-D
326686-D
326695-D
326702-D
326711-D
326720-D
326739-D
10602
10603
10604
10605
10606
10607
10608
10609
10610
3/16"
7/32"
1/4"
9/32"
5/16"
11/32"
3/8"
7/16"
1/2"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.042
.042
.042
.042
.042
.042
.042
.042
.083
Product
No.
Mfg.
No.
Description
310182-C
19018
1/4" Metric Socket Set
Unit
Cost
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
Order
Mult.
Weight
0/0/1
.900
Unit
Cost
27.99 SET
ALLE NSO CKETS
Danaher Tool Group
1/4" Drive Deep Metric Sockets - 6-point deep wall sockets with
Allendrive™ feature for greater gripping power. Chamfered
openings provide fast, positive positioning. Made in U.S.A.
AL ENSOCKETS
Danaher Tool Group
1/4" Drive Deep Sockets - 6-point deep sockets with Allendrive™
feature for greater gripping power. Chamfered openings
provide fast, positive positioning.
Product
No.
Mfg.
No.
Description
301266-D
301275-D
326784-D
326793-D
326800-D
326819-D
326828-D
326837-D
326846-D
10652
10653
10654
10655
10656
10657
10658
10659
10660
3/16"
7/32"
1/4"
9/32"
5/16"
11/32"
3/8"
7/16"
1/2"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.167
.083
.042
.083
.070
.083
.083
.125
.125
Order
Mult.
Weight
0/0/1
.880
Product
No.
Mfg.
No.
Description
350796-D
350818-D
350826-D
350834-D
350842-D
350850-D
350869-D
350877-D
350885-D
350893-D
350915-D
10752
10754
10756
10757
10758
10759
10760
10761
10762
10763
10764
4mm
5mm
6mm
7mm
8mm
9mm
10mm
11mm
12mm
13mm
14mm
Unit
Cost
4.29 EA
4.29 EA
4.29 EA
4.49 EA
4.49 EA
4.79 EA
4.79 EA
4.79 EA
4.79 EA
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.080
.080
.080
.080
.080
.080
.080
.080
.080
.080
.080
Unit
Cost
4.29 EA
4.29 EA
4.29 EA
4.29 EA
4.29 EA
4.29 EA
4.49 EA
4.49 EA
4.49 EA
4.49 EA
4.49 EA
ALLE NSO CKETS
Danaher Tool Group
10-Piece 1/4" Drive Metric Socket Set - Sockets feature
Allendrive™ for greater gripping power. Chamfered openings provide fast,
positive positioning. Set includes 6-point
9-Piece 1/4" Drive Deep Socket Set - Sockets feature
sockets in sizes: 4mm, 5mm, 6mm, 7mm,
Allendrive™ for greater gripping power. Chamfered openings provide fast, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm.
positive positioning. Set includes 6-point
Clamshell package. Made in U.S.A.
deep sockets in sizes: 3/16", 7/32", 1/4", 9/
Product
Mfg.
Order
Unit
32", 5/16", 11/32", 3/8", 7/16", 1/2".
No.
No.
Description
Mult.
Weight
Cost
Clamshell package. Made in U.S.A.
AL ENSOCKETS
Danaher Tool Group
347779-C
Product
No.
Mfg.
No.
Description
347760-C
19014
9pc 1/4" Socket Set
Unit
Cost
31.99 SET
AL ENSOCKETS
Danaher Tool Group
19017
1/4" Metric Socket Set
0/0/1
.760
22.99 SET
ALLE NSO CKETS
Danaher Tool Group
1/4" Drive Torx® Bit Sockets - Steel socket with heat-treated
alloy steel insert bits. Fir tree card. Made in U.S.A.
1/4" Drive Metric Sockets - 6-point sockets with Allendrive™
feature for greater gripping power. Chamfered openings provide
fast, positive positioning. Made in U.S.A.
Product
No.
Mfg.
No.
Description
350672-D
350680-D
350699-D
350702-D
350710-D
350737-D
350745-D
350753-D
350761-D
350788-D
10702
10704
10706
10707
10708
10709
10710
10711
10712
10713
4mm
5mm
6mm
7mm
8mm
9mm
10mm
11mm
12mm
13mm
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.060
.060
.060
.060
.060
.060
.060
.060
.060
.060
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
Unit
Cost
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
Product
No.
Mfg.
No.
Description
312525-D
312738-D
312770-D
312932-D
313068-D
313076-D
313092-D
58901
58902
58904
58905
58907
58908
58910
T9
T10
T15
T20
T25
T27
T30
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.040
.040
.100
.040
.040
.040
.040
Unit
Cost
3.79 EA
3.79 EA
3.79 EA
3.79 EA
3.79 EA
3.79 EA
4.29 EA
10-145
HAND TOOLS
AL ENSOCKETS
HAND TOOLS
ALLEN SOCKETS
AL ENSO CKETS
AL EN SOC KETS
Danaher Tool Group
Danaher Tool Group
3/8" Drive Ratchet - Quick release ratchet features Allen’s patented Adapter - 3/8" Female, 1/2" Male.
Torque-Wrap™ design for maximum strength.
Single hand reversing for easier
operation. Overall length: 7-5/8".
Product
No.
Mfg.
No.
Description
327578-C
11800
3/8" Drive Ratchet
Order
Mult.
Weight
0/0/1
.792
Unit
Cost
24.99 EA
AL ENSO CKETS
Danaher Tool Group
Product
No.
Mfg.
No.
Description
327346-D
11825
3/8fx1/2m Adapter
Order
Mult.
Weight
0/0/1
.167
Order
Mult.
Weight
0/0/1
.150
Unit
Cost
5.99 EA
AL EN SOC KETS
Danaher Tool Group
Universal Joint - 3/8" drive.
3/8" Drive Ratchet - Round head design provides same torque
strength and durability as teardrop-shaped ratchet. Nonquick
release head. Length: 7-1/2".
Product
No.
Mfg.
No.
Description
311618-C
11801
3/8" Round Ratchet
Order
Mult.
Weight
0/0/1
.670
327435-C
11822
3/8" Flex Ratchet
Order
Mult.
Weight
0/0/1
1.125
327596-D
11830
3/8" Universal Joint
3/8" Drive Sockets - Sockets have patented Allendrive™ feature for
greater gripping power. Chamfered openings provide
fast, positive positioning. Made in U.S.A.
6-point standard:
Product
No.
Mfg.
No.
Description
327444-D
327453-D
327462-D
327471-D
350923-D
313920-D
313939-C
313947-D
313955-D
327480-D
327499-D
327505-D
352380-D
337282-D
11008
11009
11010
11011
11606
11608
11609
11610
11611
11612
11613
11614
11615
11616
3/8"
7/16"
1/2"
9/16"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
Unit
Cost
32.49 EA
Danaher Tool Group
3/8" Drive Flex Head Handle - 10" long. Heat-treated and
tempered alloy steel. Chrome plated with diamond knurled handle.
Mfg.
No.
Description
327532-C
11820
3/8" Flex Handle
Order
Mult.
Weight
0/0/1
.542
Unit
Cost
16.99 EA
AL ENSO CKETS
3/8" Extension - Use with ratchet or flex handle.
Mfg.
No.
Description
327541-D
327550-D
327569-C
11805
11810
11812
3"
6"
10"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.042
.042
.042
.083
.006
.051
.051
.061
.071
.083
.125
.125
.167
.208
Unit
Cost
2.79 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
2.99 EA
3.49 EA
3.49 EA
3.49 EA
3.79 EA
3.79 EA
3.79 EA
3.79 EA
AL EN SOC KETS
Danaher Tool Group
9-Piece 3/8" Drive Deep Socket Set - Sockets feature
Allendrive™ for greater gripping power. Chamfered openings provide fast,
positive positioning. Set includes 12-point
deep sockets in sizes 3/8", 7/16", 1/2", 9/
16", 5/8", 11/16", 3/4", 13/16", 7/8".
Clamshell package. Made in U.S.A.
Danaher Tool Group
Product
No.
14.49 EA
AL EN SOC KETS
AL ENSO CKETS
Product
No.
Unit
Cost
Danaher Tool Group
Flex Head Ratchet - 3/8" drive. Heat-treated and tempered steel.
Diamond knurled handle is 11-1/4" long.
Description
Description
18.79 EA
Danaher Tool Group
Mfg.
No.
Mfg.
No.
Unit
Cost
AL ENSO CKETS
Product
No.
Product
No.
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
.208
.375
.708
Product
No.
Mfg.
No.
Description
307645-C
19115
9pc 3/8" Deep Socket Set
Unit
Cost
5.79 EA
6.99 EA
11.79 EA
AL ENSO CKETS
Danaher Tool Group
Reducing Adapter - 3/8" to 1/4". Permits use of 1/4" drive sockets
Order
Mult.
Weight
0/0/1
2.500
Unit
Cost
37.99 SET
AL EN SOC KETS
Danaher Tool Group
3/8" Drive Deep Sockets - 12-point deep sockets feature
Allendrive™ for greater gripping power. Chamfered openings for
fast, positive positioning. Made in
U.S.A.
with 3/8" drive handle.
Product
No.
Mfg.
No.
Description
326748-D
11827
3/8fx1/4m Adapter
10-146
Order
Mult.
Weight
0/0/1
.083
Unit
Cost
4.49 EA
Product
No.
Mfg.
No.
327355-D
11858
327364-D
11859
327373-D
11860
327382-D
11861
327391-D
11862
Continued Next Column
Description
3/8"
7/16"
1/2"
9/16"
5/8"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.083
.083
.125
.167
.250
Unit
Cost
4.99 EA
4.99 EA
4.99 EA
5.79 EA
5.79 EA
Save time by letting us locate those
hard-to-find items for you!
HAND TOOLS
ALLEN SOCKETS
Continued From Previous Column
Continued From Previous Column
Product
No.
Mfg.
No.
Description
327408-D
327417-D
327426-C
301337-C
11863
11864
11865
11866
11/16"
3/4"
13/16"
7/8"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
.292
.292
.375
.417
Unit
Cost
Product
No.
Mfg.
No.
Description
352656-D
352665-D
352674-D
352683-D
352692-D
352709-D
352718-D
352727-D
352736-D
352745-D
350931-D
11710
11711
11712
11713
11714
11715
11716
11717
11718
11719
11721
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
21mm
5.79 EA
5.79 EA
6.49 EA
6.79 EA
AL ENSOCKETS
Danaher Tool Group
3/8" Drive Spark Plug Socket -
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.052
.063
.052
.063
.073
.094
.104
.136
.156
.136
.240
Unit
Cost
3.29 EA
3.29 EA
3.29 EA
3.29 EA
3.29 EA
3.29 EA
3.79 EA
3.79 EA
3.79 EA
3.79 EA
3.99 EA
ALEL NSO CKETS
Mfg.
No.
Description
345763-C
327514-C
11695
11696
5/8"
13/16"
Order
Mult.
Weight
0/0/1
0/0/1
.208
.300
Unit
Cost
5.49 EA
5.49 EA
AL ENSOCKETS
Danaher Tool Group
Danaher Tool Group
3/8" Drive Deep Metric Sockets - 12-point deep wall sockets
feature Allendrive™ for greater gripping power. Chamfered openings
provide fast, positive positioning. Made in U.S.A.
10-Piece 3/8" Drive Socket Set - Sockets feature Allendrive™ for
greater gripping power. Chamfered openings provide fast,
positive positioning. Includes
12-point sockets in sizes: 5/16", 3/
8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/
4", 13/16", and 7/8". Steel socket
rail for convenient storage. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
302775-C
19114
10pc 3/8" Socket Set
Order
Mult.
Weight
0/0/1
1.600
Product
No.
Mfg.
No.
Description
302014-C
353012-C
353021-C
353030-C
353049-C
353058-C
353067-C
350958-C
353076-C
350966-C
353085-C
11759
11760
11761
11762
11763
11764
11765
11766
11767
11768
11769
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
Unit
Cost
23.99 SET
AL ENSOCKETS
Danaher Tool Group
10-Piece 3/8" Drive Metric Socket Set - Sockets feature
Allendrive® for greater gripping power. Chamfered openings provide fast,
positive positioning. Set includes
12-point sockets in sizes: 9mm, 10mm,
11mm, 12mm, 13mm, 14mm, 15mm,
17mm, 18mm, 19mm, and clip rail.
Clamshell package. Made in U.S.A.
Product
No.
Mfg.
No.
Description
310336-C
19119
10pc Metric Socket Set
Order
Mult.
Weight
0/0/1
.920
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.167
.125
.125
.125
.125
.125
.167
.180
.292
.180
.292
Unit
Cost
5.99 EA
5.99 EA
5.99 EA
5.99 EA
5.99 EA
6.29 EA
6.29 EA
6.29 EA
6.49 EA
6.49 EA
6.49 EA
ALLE NSO CKETS
Danaher Tool Group
9-Piece 3/8" Drive Hex Bit Socket Set - Chrome vanadium
alloy steel sockets with heat-treated alloy steel insert bits. Set includes: 7/
64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/
8", and metal clip rail. Clamshell package.
Unit
Cost
23.99 SET
AL ENSOCKETS
Danaher Tool Group
11-Piece 3/8" Drive Deep Metric Socket Set - Sockets
feature Allendrive® for greater gripping power. Chamfered openings
provide fast, positive positioning. Set
includes 12-point deep sockets in sizes:
9mm, 10mm, 11mm, 12mm, 13mm,
14mm, 15mm, 16mm, 17mm, 18mm,
19mm, and socket rail. Clamshell
package. Made in U.S.A.
Product
No.
Mfg.
No.
Description
310328-B
19120
11pc Metric Socket Set
Order
Mult.
Weight
0/0/1
2.100
Unit
Cost
47.99 SET
Product
No.
Mfg.
No.
Description
311200-B
56373
9pc Hex Bit Socket Set
Order
Mult.
Weight
0/0/1
1.600
Unit
Cost
49.99 SET
ALLE NSO CKETS
Danaher Tool Group
3/8" Drive Hex Bit Socket - Chrome vanadium alloy steel sockets
AL ENSOCKETS
Danaher Tool Group
3/8" Drive Metric Sockets - 12-point sockets feature Allendrive™
with heat-treated alloy steel insert bits. Fir tree cards. Made in
U.S.A.
for greater gripping power. Chamfered openings provide
fast, positive positioning. Made in U.S.A.
Product
No.
Mfg.
No.
352647-D
11709
Continued Next Column
Description
9mm
We can become your single-source supplier
on many of the products you currently use!
Order
Mult.
Weight
0/0/1
.052
Unit
Cost
3.29 EA
Product
No.
Mfg.
No.
Description
355275-D
355283-D
355291-D
355313-D
58830
58832
58834
58835
7/32"
1/4"
5/16"
3/8"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
.033
.033
.033
.033
Unit
Cost
3.79 EA
4.29 EA
4.29 EA
4.29 EA
10-147
HAND TOOLS
Product
No.
HAND TOOLS
ALLEN SOCKETS
AL ENSO CKETS
AL EN SOC KETS
Danaher Tool Group
Danaher Tool Group
3/8" Drive Metric Hex Bit Socket - Chrome vanadium alloy steel 1/2" Drive Flex Head Handle - Heat-treated and tempered alloy
sockets with heat-treated alloy steel insert bits. Fir tree cards.
Made in U.S.A.
Product
No.
Mfg.
No.
Description
355348-D
355356-D
355364-D
58706
58708
58710
6mm
8mm
10mm
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
.033
.033
.033
steel. Chrome-plated with diamond knurled handle. 15".
Unit
Cost
3.79 EA
3.79 EA
3.79 EA
AL ENSO CKETS
Danaher Tool Group
Product
No.
Mfg.
No.
Description
301845-C
12920
15" Flex Handle
Order
Mult.
Weight
0/0/1
1.500
Unit
Cost
29.99 EA
AL EN SOC KETS
Danaher Tool Group
Beam Type Torque Wrench - Precision ground, chrome plated.
Readings in in./lb. or ft./lb. and Newton meters. Accuracy meets
requirements of National Bureau of
Standards.
3/8" Drive Torx® Bit Socket - Steel socket with heat-treated alloy
steel insert bits. Fir tree card. Made in U.S.A.
Product
No.
313106-D
313114-D
313122-D
313130-D
Mfg.
No.
58911
58913
58914
58916
Description
T40
T45
T50
T55
Order
Mult.
0/0/1
0/0/1
0/0/1
0/0/1
Weight
.100
.100
.100
.100
5.29 EA
5.29 EA
5.29 EA
5.49 EA
1/2" Drive Ratchet - Quick release ratchet features Allen’s patented
Torque-Wrap™ design for maximum strength.
Single hand reversing for easier operation.
10-3/8". Made in U.S.A.
Description
327202-B
12900
1/2" Drive Ratchet
353192-C
2956
353218-D
2957
Description
3/8" drive, 16" long, 0-600 in.
lb.
1/2" drive, 20" long, 0-150 ft.
lb.
Order
Mult.
Weight
0/0/1
1.500
0/0/1
2.500
Unit
Cost
R 69.99
EA
R 67.99
EA
AL EN SOC KETS
Danaher Tool Group
Extension - 1/2" drive. For use with ratchet or flex handle.
Danaher Tool Group
Mfg.
No.
Mfg.
No.
Unit
Cost
AL ENSO CKETS
Product
No.
Product
No.
Order
Mult.
Weight
0/0/1
1.292
Product
No.
Mfg.
No.
Description
313904-C
327159-C
327168-D
12905
12910
12912
3"
6"
10"
Unit
Cost
35.99 EA
AL ENSO CKETS
Danaher Tool Group
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
.291
.417
.833
Unit
Cost
6.99 EA
7.99 EA
12.99 EA
AL EN SOC KETS
Danaher Tool Group
Adapter - 1/2" Female, 3/8" Male. Permits use of 3/8" drive sockets with
1/2" Drive Ratchet - Round head design provides same torque
1/2" drive handles.
strength and durability as teardrop-shaped ratchet. Nonquick
release. Length: 7-1/2".
Product
No.
Mfg.
No.
Description
312002-B
12901
1/2" Round Ratchet
Order
Mult.
Weight
0/0/1
1.280
Unit
Cost
Product
No.
Mfg.
No.
Description
327676-D
12927
1/2fx3/8m Adapter
Order
Mult.
Weight
0/0/1
.125
Unit
Cost
6.99 EA
24.99 EA
AL ENSO CKETS
Danaher Tool Group
1/2" Drive Flex Head Ratchet - Quick release ratchet features
Allen’s patented Torque-Wrap™ design for maximum strength.
Single hand reversing for easier operation.
16-1/2" long. Made in U.S.A.
Product
No.
Mfg.
No.
Description
350974-B
12902
1/2" Flex Ratchet
10-148
Order
Mult.
Weight
0/0/1
1.670
Unit
Cost
49.99 EA
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
ALLEN SOCKETS
ALEL NSO CKETS
Danaher Tool Group
Danaher Tool Group
1/2" Drive Deep Sockets - 12-point deep wall sockets feature
1/2" Drive Sockets - 6-point sockets feature Allendrive™ for greater
gripping power. Chamfered openings provide fast, positive
positioning. Made in U.S.A.
Allendrive™ for greater gripping power. Chamfered openings
provide fast, positive positioning. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
327211-D
327220-D
327239-D
327248-D
327257-D
327266-D
327275-D
327284-C
327293-C
344005-D
327300-D
12560
12561
12562
12563
12564
12565
12566
12567
12568
12569
12570
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.333
.333
.292
.375
.458
.500
.542
.583
.708
.750
.800
8.49 EA
8.49 EA
8.79 EA
8.79 EA
9.29 EA
9.49 EA
10.49 EA
10.79 EA
10.79 EA
13.49 EA
13.49 EA
Spark Plug Socket - 1/2" drive.
Description
313963-C
327328-C
12695
12696
5/8"
13/16"
Order
Mult.
Weight
0/0/1
0/0/1
.281
.292
AL ENSOCKETS
Danaher Tool Group
Increasing Adapter - 1/2" Female, 3/4" Male.
Product
No.
Mfg.
No.
Description
300579-D
12928
1/2fx3/4m Adapter
Description
326935-D
326944-D
326953-D
313971-D
313998-D
314005-D
314013-D
314021-C
314048-C
314064-C
314072-C
314080-D
314099-C
12029
12030
12031
12032
12033
12034
12035
12036
12037
12038
12039
12040
12042
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-1/4"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.125
.125
.125
.121
.151
.181
.223
.243
.273
.323
.373
.393
.503
Unit
Cost
4.29 EA
4.29 EA
4.49 EA
4.49 EA
4.49 EA
4.49 EA
4.49 EA
4.99 EA
4.99 EA
5.29 EA
5.99 EA
6.79 EA
7.29 EA
ALLE NSO CKETS
Danaher Tool Group
1/2" Drive Sockets - 12-point sockets feature Allendrive™ for greater
gripping power. Chamfered openings provide for fast, positive
positioning. Made in U.S.A.
Danaher Tool Group
Mfg.
No.
Mfg.
No.
Unit
Cost
AL ENSOCKETS
Product
No.
Product
No.
Order
Mult.
Weight
0/0/1
.292
Order
Mult.
Weight
0/0/1
.292
Unit
Cost
Product
7.49 EA No.
7.49 EA 350982-D
305681-D
305707-D
305789-D
327015-D
327024-D
327033-D
327051-D
327060-D
327079-D
327088-D
327097-D
Unit
327104-C
Cost
327122-C
9.99 EA 360651-D
Mfg.
No.
Description
12608
12609
12610
12611
12612
12613
12614
12615
12616
12617
12618
12619
12620
12622
12226
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-1/4"
1-1/2"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.120
.083
.083
.083
.125
.167
.208
.250
.292
.333
.333
.458
.500
.625
.560
Unit
Cost
4.79 EA
4.79 EA
4.79 EA
4.99 EA
4.99 EA
4.99 EA
5.29 EA
5.29 EA
5.79 EA
5.79 EA
6.29 EA
6.29 EA
7.49 EA
7.99 EA
16.49 EA
AL ENSOCKETS
Danaher Tool Group
Universal Joint - 1/2" drive.
Product
No.
Mfg.
No.
Description
327319-C
12930
1/2" Universal Joint
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
Unit
Cost
17.49 EA
10-149
HAND TOOLS
AL ENSOCKETS
HAND TOOLS
ALLEN SOCKETS
AL ENSO CKETS
AL EN SOC KETS
Danaher Tool Group
Danaher Tool Group
1/2" Drive Metric Sockets - 12-point sockets feature Allendrive™ 8-Piece 1/2" Drive Deep Impact Socket Set - Includes 6-point
for greater gripping power. Chamfered openings provide for
fast, positive positioning. Made in U.S.A.
Product
No.
Mfg.
No.
Description
302167-D
334203-D
334249-D
334579-D
334775-D
334917-D
335293-D
335550-D
335925-D
336023-D
336167-D
351016-D
350990-C
336434-C
351008-C
336559-D
351024-D
351040-D
336951-D
351059-C
337273-C
337308-C
12709
12710
12711
12712
12713
12714
12715
12716
12717
12718
12719
12720
12721
12722
12723
12724
12725
12726
12727
12728
12730
12732
9mm
10mm
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
20mm
21mm
22mm
23mm
24mm
25mm
26mm
27mm
28mm
30mm
32mm
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.167
.281
.136
.136
.136
.146
.156
.146
.208
.188
.188
.200
.200
.250
.240
.271
.320
.330
.417
.420
.511
.552
AL ENSO CKETS
Danaher Tool Group
1/2" Drive Hex Bit Socket - Chrome vanadium alloy steel
with heat-treated alloy steel insert bits. Fir tree card. Made in
U.S.A.
sockets in sizes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", and
socket rail. Black oxide finish. Made in
U.S.A.
Unit
Cost
Product
No.
4.99 EA 310638-C
4.99 EA
4.99 EA
4.99 EA
4.99 EA
4.99 EA Black oxide
5.29 EA
5.29 EA
5.29 EA
5.29 EA
5.49 EA
5.99 EA
5.99 EA
5.99 EA
5.99 EA
6.29 EA
6.29 EA Product
6.29 EA No.
8.79 EA 313149-D
9.29 EA 313157-D
10.49 EA 313165-D
11.99 EA 313173-D
313181-D
313203-D
313211-D
sockets 313238-C
313246-D
313254-D
313556-C
313599-D
313823-C
Mfg.
No.
Description
19505
8pc 1/2" Socket Set
Order
Mult.
Weight
0/0/1
1.050
Unit
Cost
77.99 SET
AL EN SOC KETS
Danaher Tool Group
1/2" Drive Impact Sockets - 6-point, standard depth sockets.
finish. Fir tree cards. Made in U.S.A.
Mfg.
No.
Description
35274
35275
35030
35032
35033
35034
35035
35036
35037
35277
35279
35281
35283
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-1/4"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.193
.223
.233
.233
.233
.283
.333
.393
.523
.523
.540
.680
.820
Unit
Cost
5.79 EA
5.79 EA
6.29 EA
6.49 EA
6.99 EA
6.99 EA
7.29 EA
7.29 EA
8.49 EA
9.29 EA
9.49 EA
10.49 EA
11.49 EA
AL EN SOC KETS
Danaher Tool Group
1/2" Drive Deep Impact Sockets - 6-point, deep depth impact
Product
No.
Mfg.
No.
Description
311316-D
311340-C
311367-C
311537-C
311561-C
58851
58852
58853
58854
58855
1/4"
5/16"
3/8"
7/16"
1/2"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.367
.417
.450
.517
.567
Unit
Cost
sockets. Black oxide finish. Fir tree cards. Made in U.S.A.
6.99 EA
7.49 EA
7.99 EA
9.49 EA
9.99 EA
AL ENSO CKETS
Danaher Tool Group
7-Piece 1/2" Drive Impact Socket Set - Includes 6-point
sockets in sizes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", and socket
rail. Black oxide finish. Made in U.S.A.
Product
No.
Mfg.
No.
Description
310492-C
19503
7pc 1/2" Socket Set
10-150
Order
Mult.
Weight
0/0/1
.590
Unit
Cost
37.99 SET
Product
No.
Mfg.
No.
Description
314714-D
313262-D
313270-C
313289-C
313297-C
313300-C
313319-D
313327-C
313335-D
313343-D
314722-C
314757-C
35294
35295
35090
35091
35092
35093
35094
35095
35096
35097
35297
35298
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.310
.425
.425
.425
.425
.464
.494
.594
.734
.842
1.020
1.090
Unit
Cost
9.99 EA
10.99 EA
10.99 EA
10.99 EA
10.99 EA
10.99 EA
11.79 EA
12.79 EA
13.49 EA
13.79 EA
14.99 EA
16.79 EA
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
ALLEN SOCKETS
AL ENSOCKETS
ALEL NSO CKETS
Danaher Tool Group
Danaher Tool Group
1/2" Drive Metric Impact Sockets - 6-point standard depth
Slide T-Handle - 3/4" drive, 18" long.
impact sockets. Black oxide finish. Fir tree cards. Made in
U.S.A
Product
No.
Mfg.
No.
Description
327916-C
13922
3/4" Drive T-handle
Order
Mult.
Weight
0/0/1
4.000
Unit
Cost
39.99 EA
ALLE NSO CKETS
Danaher Tool Group
Mfg.
No.
Description
314994-D
315001-D
315036-D
315052-D
315206-D
315559-D
315737-D
315796-C
35307
35311
35313
35317
35321
35322
35323
35331
12mm
14mm
15mm
17mm
19mm
21mm
22mm
30mm
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.150
.180
.200
.230
.280
.350
.360
1.380
Unit
Cost
3/4" Drive Flex Head Handle - Heat-treated and tempered alloy
steel. Chrome plated with diamond knurled handle. Size: 19".
5.79 EA
6.49 EA
6.49 EA
6.49 EA
6.49 EA Product
6.79 EA No.
8.29 EA 327872-C
18.99 EA
Mfg.
No.
Description
13920
19" Flex Handle
Order
Mult.
Weight
0/0/1
3.750
Unit
Cost
64.99 EA
ALLE NSO CKETS
Danaher Tool Group
AL ENSOCKETS
Danaher Tool Group
Impact Extension - 1/2" drive. Black oxide finish. For use with impact
Extension - 3/4" drive. For use with ratchet or flex handle.
tools. Fir tree cards.
Product
No.
Mfg.
No.
Description
313866-D
313874-C
313882-C
35285
35287
35289
3"
6"
10"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
.290
.600
.970
Product
No.
Mfg.
No.
Description
353174-C
327881-D
327890-D
13910
13912
13914
5"
8"
16"
Unit
Cost
11.49 EA
14.79 EA
14.99 EA
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
.750
1.750
3.500
Unit
Cost
25.99 EA
28.99 EA
46.99 EA
ALLE NSO CKETS
Danaher Tool Group
Reducing Adapter - 3/4" Female, 1/2" Male.
AL ENSOCKETS
Danaher Tool Group
Impact Adapter - 1/2" drive. Black oxide finish. Fir tree cards. Made
in U.S.A.
Product
No.
Mfg.
No.
Description
301973-C
13927
3/4fx1/2m Adapter
Order
Mult.
Weight
0/0/1
.400
Order
Mult.
Weight
0/0/1
.400
Unit
Cost
19.99 EA
ALLE NSO CKETS
Danaher Tool Group
Increasing Adapter - 3/4" Female, 1" Male.
Product
No.
Mfg.
No.
313890-D
314501-C
35291
35293
Description
Order
Mult.
Weight
1/2" x 3/8"
1/2" x 3/4"
0/0/1
0/0/1
.150
.320
Unit
Cost
11.49 EA
15.99 EA
AL ENSOCKETS
Danaher Tool Group
3/4" Drive Ratchet - Quick release ratchet features Allen’s patented
Product
No.
Mfg.
No.
Description
Torque-Wrap™ design for maximum strength.
Single hand reversing for easier
operation. Overall length: 20". Made in
U.S.A.
301981-C
13928
3/4-1 Adapter
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302104-B
13900
3/4" Ratchet
0/0/1
5.400
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
Unit
Cost
37.99 EA
Unit
Cost
99.99 EA
10-151
HAND TOOLS
Product
No.
HAND TOOLS
ALLEN SOCKETS
AL ENSO CKETS
AL EN SOC KETS
Danaher Tool Group
Danaher Tool Group
3/4" Drive Sockets - 12-point sockets feature Allendrive™ for greater 10-Piece SAE Combination Wrench Set - Professional quality
gripping power. Chamfered openings for fast, positive
positioning. Made in U.S.A.
Product
No.
Mfg.
No.
Description
327701-D
327710-D
327729-D
327738-D
327747-D
327756-D
327765-C
327774-C
327783-C
327792-C
314102-D
327818-C
327827-C
327836-C
327845-D
327854-D
327863-C
346986-C
346968-C
13203
13204
13205
13206
13207
13208
13209
13210
13211
13212
13213
13214
13215
13216
13217
13218
13220
13222
13224
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
1-9/16"
1-5/8"
1-11/16"
1-3/4"
1-13/16"
1-7/8"
2"
2-1/8"
2-1/4"
wrenches feature Allendrive™ box-ends for maximum torque strength.
Allengrip™ finish for comfort and durability. Contains
the following sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16",
5/8", 11/16", 3/4", and 7/8". Comes with unique
storage case. Made in U.S.A.
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.500
.500
.500
.750
.750
.750
.690
.750
.750
1.000
.872
1.000
1.000
1.250
1.250
1.500
1.500
2.250
2.250
Unit
Cost
16.49 EA
16.49 EA
16.49 EA
16.99 EA
17.79 EA
17.79 EA
19.49 EA
19.99 EA Product
Mfg.
Order
Unit
No.
Description
Mult.
Weight
Cost
21.99 EA No.
21.99 EA 391263-B
29007
10pc Sae Wrench Set
0/0/1
3.000
38.99 SET
24.99 EA
25.99 EA
26.99 EA
29.99 EA
- Professional quality
34.99 EA wrenches feature Allendrive™ box-ends for maximum torque strength.
34.99 EA
Allengrip™ finish for comfort and durability.
39.99 EA
42.99 EA Contains the following sizes: 7mm, 8mm, 10mm,
57.99 EA 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, and
AL EN SOC KETS
Danaher Tool Group
10-Piece Metric Combination Set
18mm. Made in U.S.A.
AL ENSO CKETS
Danaher Tool Group
7-Piece Combination Wrench Set - Professional quality
wrenches feature Allendrive™ box-ends for maximum torque strength.
Allengrip™ finish for comfort and durability. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
391271-B
29008
10pc Metric Wrench Set
Order
Mult.
Weight
0/0/1
2.300
Unit
Cost
38.99 SET
AL EN SOC KETS
Danaher Tool Group
Product
No.
Mfg.
No.
347450-B
29000
347493-B
29002
10-152
Description
Contains the following sizes:
3/8", 7/16", 1/2", 9/16", 5/8",
11/16", and 3/4"
Contains the following sizes:
10mm, 12mm, 13mm,
14mm, 15mm, 17mm, and
19mm
Order
Mult.
Weight
0/0/1
.740
29.99 SET
Unit
Cost
0/0/1
.740
29.99 SET
14-Piece Combination Wrench Set - Professional quality
wrenches feature Allendrive™ box ends for maximum torque strength.
Allengrip™ finish for comfort and
durability. Includes sizes: 3/8", 7/16", 1/
2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/
8", 15/16", 1", 1-1/16", 1-1/8", and 1-1/
4". Packed in a vinyl pouch. Made in
U.S.A.
Product
No.
Mfg.
No.
Description
328014-B
29010
14pc Combination Wrench
Order
Mult.
Weight
Unit
Cost
0/0/1
11.750
169.99 SET
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
ALLEN WRENCHES
Continued From Previous Column
Al enWrenches
Danaher Tool Group
11-Piece Metric Combination Wrench Set - Professional
Product
No.
Mfg.
No.
Description
quality wrenches feature Allendrive™ box ends for maximum torque
strength. Allengrip™ finish for comfort
and durability. Includes sizes: 7mm,
8mm, 9mm, 10mm, 11mm, 12mm,
13mm, 14mm, 15mm, 17mm, and
19mm. Packed in a vinyl pouch. Made
in U.S.A.
328452-C
337558-D
337683-D
337709-C
337727-D
337772-D
351067-D
337549-D
351075-D
302176-C
351083-C
21017
21106
21107
21110
21112
21113
21116
21117
21118
21120
21121
15/16" x 1", 10-3/4" long
6 x 8mm, 4-1/2" long
7 x 9mm, 5" long
10 x 11mm, 5-1/4" long
12 x 14mm, 6-1/8" long
13 x 15mm, 6-7/8" long
16 x 17mm, 7-3/4" long
17 x 19mm, 8-3/4" long
18 x 19mm, 8-7/8" long
20 x 22mm, 9-1/2" long
21 x 23mm, 10-3/8" long
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
1.042
.050
.083
.110
.160
.250
.900
.375
1.260
.583
1.800
Unit
Cost
19.99 EA
8.29 EA
8.29 EA
8.49 EA
8.79 EA
9.79 EA
13.49 EA
13.49 EA
13.49 EA
17.79 EA
21.49 EA
ALLE NWRENCH ES
Mfg.
No.
Description
352586-B
29017
11pc Met Comb Wrench Set
Order
Mult.
Weight
0/0/1
4.000
Unit
Cost
69.99 SET
AL ENWREN CHES
Danaher Tool Group
Combination Wrenches - Professional quality combination
wrenches feature Allendrive™ box-ends for maximum torque
strength. Allengrip™ finish for comfort
and durability. Made in U.S.A.
Product
No.
Mfg.
No.
Description
306939-D
307064-D
328194-C
328201-D
328210-C
328229-C
328238-C
328247-C
328256-C
328265-C
328274-D
328283-D
328292-C
328309-C
328318-D
328327-C
315242-D
315322-D
315368-D
315938-D
315947-C
316376-D
316492-D
316508-C
316964-D
316982-D
317008-C
317017-C
317026-D
302185-D
317035-D
317044-C
20204
20206
20208
20209
20210
20211
20212
20213
20214
20215
20216
20217
20218
20219
20220
20222
20307
20308
20309
20310
20311
20312
20313
20314
20315
20316
20317
20318
20319
20320
20321
20322
1/4", 4" long
5/16", 4-3/8" long
3/8", 5-1/4" long
7/16", 5-3/4" long
1/2", 6-1/2" long
9/16", 7-1/8" long
5/8", 8" long
11/16", 8-3/4" long
3/4", 9-5/8" long
13/16", 10-1/2" long
7/8", 11-1/2" long
15/16", 12-1/2" long
1", 13-1/2" long
1-1/16", 14-5/8" long
1-1/8", 15-1/2" long
1-1/4", 16-7/8" long
7mm, 4-1/4" long
8mm, 4-3/8" long
9mm, 4-3/4" long
10mm, 5-1/2" long
11mm, 5-3/4" long
12mm, 6-1/4" long
13mm, 6-1/2" long
14mm, 7-1/8" long
15mm, 8" long
16mm, 8" long
17mm, 8-3/4" long
18mm, 8-3/4" long
19mm, 9-5/8" long
20mm, 10-1/4" long
21mm, 10-7/8" long
22mm, 11-1/2" long
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.042
.083
.083
.125
.167
.250
.333
.417
.500
.667
.833
1.042
1.208
1.667
2.000
2.333
.042
.042
.083
.083
.125
.125
.125
.208
.250
.333
.340
.370
.500
.583
.667
.760
Box-End Wrenches - Professional quality box-end wrenches feature
Allendrive™ box-ends for maximum torque strength.
Allengrip™ finish for comfort and
durability. Made in U.S.A.
Product
No.
Mfg.
No.
Description
351105-D
328498-C
328504-D
328513-D
328522-D
328531-D
328540-D
328559-C
351091-D
328568-C
22204
22208
22209
22210
22211
22212
22213
22214
22215
22217
1/4" x 5/16", 4-1/4" long
3/8" x 7/16", 7-3/4" long
7/16" x 1/2", 8-1/2" long
1/2" x 9/16", 9-1/8" long
9/16" x 5/8", 9-7/8" long
5/8" x 3/4", 10-1/2" long
11/16" x 13/16", 11-7/8" long
3/4" x 7/8", 12-5/8" long
13/16" x 7/8", 12-5/8" long
15/16" x 1", 12-5/8" long
Unit
Cost
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.300
.167
.208
.250
.375
.458
.542
.750
2.160
1.000
Order
Mult.
Weight
0/0/1
1.260
Unit
Cost
8.79 EA
8.49 EA
8.99 EA
9.29 EA
11.49 EA
12.49 EA
12.49 EA
14.49 EA
17.79 EA
19.99 EA
6.79 EA
6.79 EA
6.79 EA
7.79 EA
7.99 EA
8.49 EA
9.79 EA
10.49 EA
- Includes sizes 3/8" x 7/16", 1/2" x
11.99 EA 9/16", and 5/8" x 11/16". Packed in a vinyl pouch. Made
13.99 EA
in U.S.A.
16.49 EA
21.49 EA
23.49 EA
29.99 EA
33.49 EA
37.99 EA
Mfg.
Order
Unit
6.79 EA Product
No.
Description
Mult.
Weight
Cost
6.79 EA No.
6.79 EA 318493-B
29202
Flare Nut Wrench Set
0/0/1
.660
24.99 SET
6.79 EA
6.79 EA
7.79 EA
- Precision engineered, thin design.
8.49 EA
8.49 EA Chrome plated. 4-piece set includes: 1/4" x 5/16", 3/8" x 7/16",
9.99 EA
1/2" x 9/16", and 5/8" x 11/16" wrenches packed in vinyl
9.99 EA
10.49 EA pouch. Made in U.S.A.
10.49 EA
12.79 EA
13.49 EA
14.99 EA
16.99 EA
ALLE NWRENCH ES
Danaher Tool Group
3-Piece Flare Nut Wrench Set
ALLE NWRENCH ES
Danaher Tool Group
Ratcheting Box Wrench Set
AL ENWREN CHES
Danaher Tool Group
Open-End Wrenches - Professional quality open-end wrenches
feature Allengrip™ finish for comfort and durability.
Made in U.S.A.
Product
No.
Mfg.
No.
328363-C
21004
328372-D
21008
328390-D
21010
303228-C
21012
324189-C
21013
324198-C
21014
Continued Next Column
Description
1/4" x 5/16", 4-1/4" long
3/8" x 7/16", 5-1/4" long
1/2" x 9/16", 6-1/8" long
5/8" x 3/4", 7-7/8" long
11/16" x 13/16", 7-7/8" long
3/4" x 7/8", 9-3/8" long
Your representative can give you details
on product availability and shipping requirements!
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.042
.125
.208
.417
.458
.667
Product
No.
Mfg.
No.
Description
311030-C
29301
Ratching Box Wrench Set
Unit
Cost
47.99 SET
Unit
Cost
7.49 EA
7.99 EA
8.99 EA
12.49 EA
13.49 EA
17.99 EA
10-153
HAND TOOLS
Product
No.
Danaher Tool Group
HAND TOOLS
ALLEN WRENCHES
Continued From Previous Column
AL ENWRENC HES
Danaher Tool Group
Ratcheting Box End Wrench - Presision engineered, thin design.
Product
No.
Mfg.
No.
Chrome plated. Carded. Made in U.S.A.
330092-D
15116
330109-D
15120
330118-D
15124
330127-D
15128
330136-E
15132
344818-D
15203
344796-F
15204
330145-F
15205
330154-F
15206
337120-E
15207
330163-D
15208
336915-D
15209
330172-D
15210
330181-E
15212
330190-E
15214
330207-D
15216
330216-E
15220
330225-D
15224
Product
No.
Mfg.
No.
Description
320325-D
320575-D
320815-D
22628
22630
22632
3/8" x 7/16"
1/2" x 9/16"
5/8" x 11/16"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
.250
.458
.667
Unit
Cost
13.79 EA
15.79 EA
18.49 EA
AL ENWRENC HES
40-Piece 1/4" And 3/8" Socket Set - Triple chrome plated,
rustproof, drop-forged ratchet. Includes 3/8" drive 8" ratchet, 3"
extension, 1/4" x 3/8" adapter, 1/4" drive
spinner handle and spin disc. Sockets
include twelve 1/4" drive 6-point
standard sockets: 5/32", 3/16", 7/32", 1/
4", 9/32", 5/16", 11/32" 3/8", 13/32", 7/
16", 15/32", 1/2"; three 1/4" drive
8-point standard sockets: 1/4", 5/16", 3/
8", three 3/8" drive 6-point standard
sockets: 1/4", 5/16", 3/8"; thirteen 1/4"
drive 6-point metric sockets: 4mm,
4.5mm, 5mm, 5.5mm, 6mm, 6.5mm,
7mm, 8mm, 9mm, 10mm, 11mm,
12mm, 13mm; three 3/8" drive 6-point
metric sockets: 11mm, 12mm, 13mm. Packed in plastic case.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
344400-C
PS040
40 Piece Socket Set
1/0/16
2.500
Description
1/4" hex size, 3.25" long
arm, 1.12" short arm
5/16" hex size, 3.75" long
arm, 1.25" short arm
3/8" hex size, 4.25" long
arm, 1.38" short arm
7/16" hex size, 4.72" long
arm, 1.47" short arm
1/2" hex size, 5.22" long
arm, 1.59" short arm
.050" hex size, 2.84" long
arm, .53" short arm
1/16" hex size, 3.00" long
arm, .56 short arm
5/64" hex size, 3.19" long
arm, .61" short arm
3/32" hex size, 3.38" long
arm, .66" short arm
7/64" hex size, 3.56" long
arm, .70" short arm
1/8" hex size, 3.75" long
arm, .75" short arm
9/64" hex size, 3.94" long
arm, .80" short arm
5/32" hex size, 4.12" long
arm, .84" short arm
3/16" hex size, 4.50" long
arm, .94" short arm
7/32" hex size, 4.88" long
arm, 1.03" short arm
1/4" hex size, 5.25" long
arm, 1.12" short arm
5/16" hex size, 6.00" long
arm, 1.25" short arm
3/8" hex size, 6.75" long
arm, 1.38" short arm
Order
Mult.
Weight
Unit
Cost
10/0/50
.070
.59 EA
5/0/25
.123
.99 EA
5/0/25
.197
1.49 EA
5/0/25
.030
3.29 EA
5/0/25
.045
3.99 EA
25/0/100
.003
.19 EA
25/0/100
.004
.29 EA
25/0/100
.008
.29 EA
25/0/100
.001
.29 EA
25/0/100
.013
.39 EA
25/0/100
.018
.39 EA
25/0/100
.025
.39 EA
25/0/100
.003
.39 EA
25/0/100
.048
.49 EA
10/0/50
.073
.79 EA
10/0/50
.093
.99 EA
5/0/25
.350
1.79 EA
5/0/25
.275
2.49 EA
KE YWRENCH ES
7-Piece Short Arm Hex Key Set - Includes hex key wrenches 5/
Unit
Cost
6.79 SET
KEYWRENC HES
64", 3/32", 1/8", 5/32", 3/16" 7/32", and 1/4". Keys are made of 8650
chrome nickel alloy steel for maximum
performance. Keys come in compact plastic
holder that firmly retains the keys in size
marked holes. Slide blister packaging is
reusable for storage on pegboard by user.
Made in U.S.A.
Hex Key Wrenches - Made of the best quality 8650 chrome nickel
alloy steel heat-treated for maximum performance.
Quality standards meet ANSI B18.3 and Fed.
Spec. GGG-K-275D. Made in U.S.A.
Product
No.
Mfg.
No.
330010-D
15103
330029-D
15104
330038-D
15105
330047-D
15106
337139-D
15107
330056-D
15108
337031-F
15109
330065-F
15110
330074-E
15112
330083-D
15114
Description
.050" hex size, 1.66" long
arm, .53" short arm
1/16" hex size, 1.75" long
arm, .56" short arm
5/64" hex size, 1.88" long
arm, .61" short arm
3/32" hex size, 2.00" long
arm, .66" short arm
7/64" hex size, 2.12" long
arm, .70" short arm
1/8" hex size, 2.25" long
arm, .75" short arm
9/64" hex size, 2.38" long
arm, .80" short arm
5/32" hex size, 2.50" long
arm, .84" short arm
3/16" hex size, 2.75" long
arm, .94" short arm
7/32" hex size, 3.00" long
arm, 1.03" short arm
Order
Mult.
Weight
Unit
Cost
25/0/100
.003
.13 EA
25/0/100
.003
.13 EA
25/0/100
.005
.15 EA
25/0/100
.005
.15 EA
25/0/100
.010
.19 EA
25/0/100
.015
.19 EA
25/0/100
.025
.29 EA
25/0/100
.030
.29 EA
25/0/100
.033
.39 EA
10/0/50
.050
.49 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
329996-D
10107
7pc Short Hex Key
1/6/60
.229
Unit
Cost
3.49 SET
Continued Next Column
10-154
Service is our priority!
Our commitment is to meet your needs!
HAND TOOLS
KEY WRENCHES
KEY WREN CHES
KEYWRENCH ES
11-Piece Short Arm Hex Key Set - Includes hex key wrenches in
sizes: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16",
7/32", and 1/4". Keys are made of 8650 chrome
nickel alloy steel for maximum performance. Keys
come in compact plastic holder that firmly retains
the keys in size marked holes. Slide blister
packaging is reusable for storage on pegboard by
user. Made in U.S.A.
18-Piece Combination Hex Key Set - Includes short arm hex
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
348848-D
10111
11pc Short Arm Hex Key
1/6/60
.317
329987-D
10018
18pc Combination Hex Key
1/6/60
.875
5.79 SET
Unit
Cost
7.99 SET
KEY WREN CHES
KEYWRENCH ES
7-Piece Long Arm Hex Key Set - Includes hex key wrenches in
sizes: 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", and 1/4". Keys are
made of 8650 chrome nickel alloy steel for maximum
performance. Keys come in compact plastic holder that
firmly retains the keys in size marked holes. Slide blister
packaging is reusable for storage on pegboard by user.
Made in U.S.A.
9-Piece Metric Short Arm Hex Key Set - Includes hex key
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
348821-D
10207
7pc Long Hex Key
1/6/60
.367
5.79 SET
348791-D
10509
9pc Metric Short Hex Key
1/6/60
.650
wrenches in sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm,
and 10mm. Keys are made of 8650 chrome nickel
alloy steel for maximum performance. Keys come
in plastic holder that firmly retains keys in size
marked holes. Slide blister packaging is reusable
for storage on pegboard by the user. Made in
U.S.A.
Unit
Cost
9.29 SET
KEY WREN CHES
KEYWRENCH ES
13-Piece Long Arm Hex Key Set - Includes hex keys in sizes:
.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32",
1/4", 5/16", and 3/8". Keys are made of 8650 chrome
nickel alloy steel for maximum performance. Keys come in
compact plastic holder that firmly retains the keys in size
marked holes. Slide blister packaging is reusable for
storage on pegboard by user. Made in U.S.A.
9-Piece Metric Long Arm Hex Key Set - Includes hex key
wrenches in sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm,
and 10mm. Keys are made of 8650 chrome nickel alloy
steel for maximum performance. Keys come in plastic
holder that firmly retains keys in size marked holes. Slide
blister packaging is reusable for storage on pegboard by
the user. Made in U.S.A.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
348805-D
10213
13pc Long Hex Key
1/6/60
.950
385050-D
10609
9pc Metric Long Hex Key
1/6/60
.081
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
Unit
Cost
11.99 SET
Unit
Cost
11.99 EA
10-155
HAND TOOLS
Unit
Cost
keys in sizes: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", and
7/32". Includes long arm hex keys in sizes: 1/16", 5/64",
3/32", 1/8", 9/64", 5/32", 3/16", 1/4", and 5/16". Keys are
made of 8650 chrome nickel alloy steel for maximum
performance. Keys come in plastic holder that firmly
retains keys in size marked holes. Slide blister packaging
is reuasable for storage on pegboard by user. Made in
U.S.A.
HAND TOOLS
KEY WRENCHES
Continued From Previous Column
KEYWRENC HES
Ball-Hex-L™ Metric and SAE Key Wrench Set - Unique
Product
No.
Mfg.
No.
339397-D
20911
339413-D
20511
306134-C
20812
316991-D
21151
316795-D
21171
ball-end design allows hex screws to be tightened or loosened at up to
25°. Made of high-quality tool steel. Packaged
in reusable plastic holders. 22-piece set
includes: .050", 1/16", 5/64", 3/32", 7/64", 1/
8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", and
3/8", and 1.5mm, 2mm, 2.5mm, 3mm, 4mm,
5mm, 6mm, 8mm, and 10mm.
Description
9-in-1, sizes 5/64", 3/32", 7/
64", 1/8", 1/64", 5/32", 3/16",
7/32", and 1/4; handle 4-1/4"
long Heavy-duty:
5-in-1, sizes 3/16", 7/32", 1/
4", 5/16", and 3/8"; handle
5-1/4" long
8 key sizes from 3/32" thru 1/
4" with 5-1/4" long handle.
Carded Metric sets:
6-in-1; sizes 3mm, 4mm,
5mm, 6mm, 8mm, 10mm;
handle 5-1/4" long
7-in-1; sizes 1.5mm, 2mm,
2.5mm, 3mm, 4mm, 5mm,
6mm; handle 3-5/8" long
Order
Mult.
Weight
Unit
Cost
1/6/60
.521
7.29 SET
1/6/60
.875
9.49 SET
1/6/60
.648
8.49 SET
1/6/60
.667
10.49 SET
1/6/60
.329
5.79 SET
KE YWRENCH ES
Product
No.
Mfg.
No.
Description
393274-B
13222
22pc L Met/sae Hex Key
Order
Mult.
Weight
1/0/6
1.717
Unit
Cost
29.99 SET
KEYWRENC HES
7-Piece Short Arm Torx Key Set - Includes torx keys in sizes:
T10, T15, T20, T25, T27, T30, and T40. Keys are made of 8650 chrome
nickel alloy steel for maximum performance. Keys
come in plastic holder that firmly retains the keys
in size marked holes. Slide blister packaging is
reusable for storage on pegboard by user. Made
in U.S.A.
Fold-Up Torx® Key Set - 7 most popular Torx® keys in 1
convenient handle. Each key can be used straight out or at right
angles for extra leverage. Made of top
quality chrome nickel alloy steel,
precision machined and hardened for
long life and precise fit. Sizes: T-10,
T-15, T-20, T-25, T-27, T-30, and T-40.
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
304697-C
22571
Torx Key Set
1/6/60
.533
Unit
Cost
12.79 EA
KE YWRENCH ES
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
356239-D
10807
7pc Short Torx Hex Key
1/6/60
.260
Unit
Cost
14.79 SET
KEYWRENC HES
Hex Key Set - Best quality chrome nickel alloy steel. Hardened and
tempered for maximum life. Ends are beveled,
slip easily into screws. Wrenches easily
replaced by removing a single bolt;
snap into right angle position, can be
used at any angle. Folds up like knife.
Handle fits the hand; easy-to-grip and
turn.
For smaller size socket screws:
Product
No.
Mfg.
No.
346414-C
20811
306142-D
20912
Description
8 key sizes from .050" thru 5/
32" including 7/64", and 9/
64" sizes key lengths from
1-7/16" to 2-3/8", handle 3"
long
9 key sizes from .050" thru 3/
16" with 3-5/8" long handle.
Carded For most commonly
used screws:
Order
Mult.
Weight
Unit
Cost
1/6/60
.188
4.29 SET
1/6/60
.188
5.29 SET
Ball Hex Key Set - Best quality chrome nickel alloy steel. Hardened
and tempered for maximum life. Ends are beveled,
slip easily into screws. Wrenches easily
replaced by removing a single bolt;
snap into right angle position, can be
used at any angle. Folds up like knife.
Handle fits the hand; easy-to-grip and
turn.
Product
No.
Mfg.
No.
375829-D
375837-D
375845-C
375853-D
20919
20719
20519
21158
Description
9-piece set; 5/64" to 1/4"
7-piece set; 1/16" to 5/32"
5-piece set; 3/16" to 3/8"
5-piece set; 1.5mm to
4.0mm
Order
Mult.
Weight
1/6/60
1/6/60
1/6/60
1/6/60
.513
.208
.882
.208
Unit
Cost
11.49 EA
8.49 EA
9.49 EA
6.79 EA
Continued Next Column
10-156
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
KEY WRENCHES
KEY WREN CHES
KEYWRENCH ES
Ergo-Fold™ Hex Key Set - Feature a composite grip handle
shaped for superior ergonomics. A soft cushion-grip insert provides
comfort and slip-resistance. Highest
quality chrome nickel alloy hex steel,
heat-treated for superior strength and
finish to resist rust.
Cushion-Grip Hex Key Set - Long reach design with loop handle
Mfg.
No.
314676-C
25912
314528-D
25911
313793-C
25611
314323-C
25919
314498-C
25171
316369-C
25161
313688-C
25581
313785-C
25024
Description
9-piece set: .050, 1/16", 5/
64", 3/32", 7/64", 1/8", 9.64",
5/32", 3/16", 7/32", 1/4", 5/
16", 3/8", handle size: Small,
red
9-piece set: 5/64", 3/32", 7/
64", 1/8", 9/64", 5/32", 3/16",
7/32", 1/4", handle size:
Medium, red
6-piece set: 5/32", 3/16", 7/
32", 1/4", 5/16", 3/8", handle
size: Large, red
9-piece set: 5/64", 3/32", 7/
64", 1/8", 9/64", 5/32", 3/16",
7/32", 1/4", handle size:
Medium, red
7-piece set: 1.5mm, 2mm,
2.5mm, 3mm, 4mm, 5mm,
6mm, handle size: Small,
blue
6-piece set: 3mm, 4mm,
5mm, 6mm, 8mm, 10mm,
handle size: Large, blue
8-piece set: T8, T10, T15,
T20, T25, T27, T30, T40,
handle size: Medium, green
Combination pack: model
No. 25911, 25171, 25581
Order
Mult.
Weight
1/4/48
.285
1/4/48
.465
Product
No.
Mfg.
No.
338516-C
53168
338524-D
53198
338532-D
55166
Unit
Cost
6.99 EA
8.49 EA
Description
8 pieces, 6" arm, sizes: 3/
32", 7/64", 1/8", 9/64", 5/32",
3/16", 7/32", and 1/4"
8 pieces, 9" arm, sizes: 3/
32", 7/64", 1/8", 9/64", 5/32",
3/16", 7/32", and 1/4"
6 pieces, 6" arm, sizes:
2mm, 2.5mm, 3mm, 4mm,
5mm, and 6mm
Order
Mult.
Weight
Unit
Cost
0/0/1
1.000
22.99 SET
0/0/1
1.250
25.49 SET
0/0/1
.925
19.99 SET
KEYWRENCH ES
1/4/48
.844
11.49 EA
1/4/48
.465
12.49 EA
1/4/48
.285
6.99 EA
1/4/48
.844
11.49 EA
1/4/48
.515
14.99 EA
1/6/48
.948
29.99 EA
KEY WREN CHES
Ball-Hex-L™ Key Wrench Set - Unique ball-end design allows
hex screws to be tightened or loosened at angles up to 25°. Made
of high-quality tool steel. Packaged in reusable plastic
holder.
Product
No.
Mfg.
No.
313564-D
13207
313580-D
13211
339199-C
13213
Cushion-Grip T-Handle Hex Keys - Long reach design with loop
handle for greater torque. Made of chrome nickel alloy steel. Hardened
and tempered for maximum strength. Vinyl-coated
handle forms a cushion-grip to reduce hand fatigue.
6" long.
Description
7-piece, 5/64", 3/32", 1/8", 5/
32", 3/16", 7/32", 1/4"
11-piece, .050", 1/16", 5/64",
3/32", 7/64", 1/8", 9/64", 5/
32", 3/16", 7/32", 1/4"
13-piece, .050", 1/16", 5/64",
3/32", 7/64", 1/8", 9/64", 5/
32", 3/16", 7/32", 1/4", 5/16",
3/8"
Order
Mult.
Weight
Unit
Cost
1/0/6
.220
10.49 SET
1/0/6
.246
13.79 SET
1/0/6
.542
19.99 SET
KEYWRENCH ES
Ball-Hex-L™ Metric/SAE Key Wrench Set - Unique ball-end
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355763-D
355771-D
355798-D
355801-D
355828-D
355836-D
355844-D
355852-D
355860-D
355879-D
51606
51607
51608
51609
51610
51612
51614
51616
51620
51624
3/32"
7/64"
1/8"
9/64"
5/32"
3/16"
7/32"
1/4"
5/16"
3/8"
1/0/12
1/0/12
1/0/12
1/0/12
1/0/12
1/0/12
1/0/6
1/0/6
1/0/6
1/0/6
.042
.050
.067
.075
.092
.142
.200
.250
.483
.700
Unit
Cost
design allows hex screws to be tightened or loosened at up to 25°. Made
of high-quality tool steel. Packaged in
reusable plastic holders. 18-piece set
includes .050", 1/6", 5/64", 3/32", 7/64", 1/
8", 9/64", 5/32", 3/16", 7/32", 1/4", and
1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm,
6mm.
2.49 EA
2.49 EA
2.49 EA
2.79 EA
2.99 EA
3.49 EA
4.29 EA
4.79 EA
7.79 EA
9.99 EA Product
No.
373397-C
Save time by letting us locate those
hard-to-find items for you!
Mfg.
No.
Description
Order
Mult.
Weight
13218
18pc L Met/sae Hex Key
1/6/36
.701
Unit
Cost
19.99 SET
10-157
HAND TOOLS
Product
No.
for greater torque. Made of chrome nickel alloy steel. Hardened
and tempered for maximum strength.
Furnished in vinyl pouch.
HAND TOOLS
KEY WRENCHES
KEYWRENC HES
CONCRETE /DRYWAL TO OLS
Ali Ind.
22-Piece Combination SAE/Metric Hex Key Set - First set Fluted Rubbing Bricks With Handle - Coarse bricks with sturdy
includes long arm hex keys in sizes: .050", 1/16", 5/64", 3/32", 7/64", 1/8", handle for easier use. For rubbing down concrete and overhead floor and
wall work. Fluted for fast cutting silicon carbide.
9/64", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8".
Second set includes short arm metric hex keys
in sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm,
5mm, 6mm, 8mm, and 10mm. Keys are made
of 8650 chrome nickel alloy steel for maximum
performance. Keys come in plastic holders that
firmly retain the keys in sized marked holes.
Slide blister packaging. Made in U.S.A.
Product
No.
Mfg.
No.
Description
322877-D
316198-D
6068
6069
8" x 3-1/2" x 1-1/2"
6" x 3" x 1"
Order
Mult.
Weight
1/0/5
1/0/5
3.700
1.850
Unit
Cost
22.99 EA
17.49 EA
CONCRETE /DRYWAL TO OLS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355887-D
10022
22pc Sae/metric Hex Key
1/6/36
1.530
Unit
Cost
21.49 SET
KEYWRENC HES
Ball-Hex-L™ Metric Wrench Set - Unique ball design allow
metric hex screws to be tightened or loosened at angles up to 25°.
Made of high-quality tool steel. Packaged in reusable
plastic holder.
Marshalltown Trowel
Brick Trowel - London pattern. Forged in 1-piece from highest grade
trowel steel; tempered, taper-ground, hand
smithed, and polished; straight post
with handle set for correct balance, 6"
handle securely attached; polished
steel ferrule.
Product
No.
Mfg.
No.
323714-C
10130
347119-C
10132
347155-C
10230
347191-C
10232
Description
Model No. 3311, hardwood
handle, 11" x 4-7/8"
Model No. 3311.5, hardwood
handle, 11-1/2" x 5"
Model No. 33P11, plastic
handle, 11" x 4-7/8"
Model No. 33P11.5, plastic
handle, 11-1/2" x 5"
Order
Mult.
Weight
Unit
Cost
1/2/12
1.125
34.99 EA
1/2/12
1.125
34.99 EA
1/2/12
1.125
37.99 EA
1/2/12
1.125
37.99 EA
CONCRETE /DRYWAL TO OLS
Product
No.
Mfg.
No.
369640-D
13607
313521-D
13609
Description
7-piece, 1.5mm, 2mm,
2.5mm, 3mm, 4mm, 5mm,
6mm
9-piece, 1.5mm, 2mm,
2.5mm, 3mm, 4mm, 5mm,
6mm, 8mm, 10mm
Unit
Cost
Marshalltown Trowel
.290
9.99 SET
Pointing Trowel - Forged 1-piece high-grade trowel steel. Tempered,
.485
17.49 SET
Order
Mult.
Weight
1/0/6
1/0/6
ground and polished. Hardwood handle with
polished ferrule
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
Grout Bag - Model No. GB690. Seamless white plastic grout bag. Blue
molded tip that can be cut to desired
opening. Easy to clean for reuse.
Product
No.
Mfg.
No.
Description
323670-C
323689-C
11124
11128
Model No. 455, 5" x 2-1/2"
Model No. 456, 6" x 2-3/4"
Order
Mult.
Weight
1/0/6
1/0/6
.333
.333
Unit
Cost
12.49 EA
12.49 EA
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Tile Setter’s Trowel - Model No. 57. Fully tempered, ground and
Product
No.
Mfg.
No.
384992-C
17816
10-158
Description
Order
Mult.
Weight
Blue-tip Grout Bag
1/6/72
.250
Unit
Cost
5.99 EA
polished after being forged from a single piece of
high-grade tool steel. Hardwood handle
with polished steel ferrule securely
attached. 7" x 4-3/8".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
370770-C
10757
7" Tile Trowel
1/6/60
.520
Unit
Cost
23.99 EA
We can become your single-source supplier
on many of the products you currently use!
HAND TOOLS
CONCRETE/DRYWALL TOOLS
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Marshalltown Trowel
Margin Trowel - Forged in 1-piece from highest grade trowel steel.
Tuck Pointer Joint Filler - Trowels have pronounced taper
Tempered, ground and polished. Hardwood handle
with polished steel ferrule.
necessary for sturdiness and correct flexibility. Has a high shank
and high lift.
Product
No.
Mfg.
No.
Description
323894-C
330528-C
11202
11204
Model No. 52, 5" x 2"
Model No. 54, 5" x 1-1/2"
Order
Mult.
Weight
Unit
Cost
Product
No.
Mfg.
No.
1/0/6
1/0/6
.340
.333
12.49 EA
12.49 EA
323929-C
323938-C
11303
11304
Trowel Handle - Model No. 14. Regular 6" length. For all Marshalltown
323947-C
323956-C
334383-C
323965-C
334669-C
11305
11306
11307
11308
11310
CONC RETED/ RYWAL TO LS
Marshalltown Trowel
brick trowels.
Description
Model No. 503, 6-1/2" x 1/4"
Model No. 504, 6-3/4" x 5/
16"
Model No. 505, 6-3/4" x 3/8"
Model No. 506, 6-3/4" x 1/2"
Model No. 507, 6-3/4" x 5/8"
Model No. 508, 6-3/4" x 3/4"
Model No. 510, 6-3/4" x 1"
Order
Mult.
Weight
Unit
Cost
1/0/6
1/0/6
.250
.250
13.49 EA
13.49 EA
1/0/6
1/0/6
1/0/6
1/0/6
1/0/6
.264
.250
.269
.292
.310
13.49 EA
13.49 EA
13.49 EA
13.49 EA
13.49 EA
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Brick Jointer - Made of high-carbon steel. Concave design.
Product
No.
Mfg.
No.
323992-C
19106
Description
Order
Mult.
Weight
Trowel Handle
1/0/12
.229
Unit
Cost
Tempered, hard and polished.
2.99 EA
CONC RETED/ RYWAL TO LS
Marshalltown Trowel
Bull Float Handle - 6’ aluminum push button handle, 1-3/8" diameter.
Constructed of thick walled aluminum tubing.
Heat-treated, lightweight. Quick
connect snap spring positively locks
handles in place.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
323901-C
323910-C
304379-C
15522
15524
15528
Model No. 80, 1/2" x 5/8"
Model No. 81, 3/4" x 7/8"
Model No. 83, 3/8" x 1/2"
1/6/72
1/6/72
1/6/72
.250
.333
.310
Unit
Cost
5.99 EA
5.99 EA
5.99 EA
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Product
No.
Mfg.
No.
Description
311157-C
14258
6 Extension Handle
Order
Mult.
Weight
1/0/6
1.517
Unit
Cost
14.79 EA
CONC RETED/ RYWAL TO LS
Marshalltown Trowel
Undercut Saw - Model No. 15391. Undercuts door lambs and other
wall base obstacles. 12" long high-carbon steel
blade with 10-point per inch. Teeth on
both sides for left and right hand
cutting. Hardwood handle.
Wood Line Blocks - Model No. 86. 3-3/4" long. Preferred by many
bricklayers. Used to make sure that a course of bricks
is straight and true. As the line is pulled
tight, the blocks hold their position by
friction on the bricks. Packed 1 pair in a
bag.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
314986-D
16506
Wood Line Block
1/0/180
.200
Unit
Cost
2.49 PR
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Brick Tongs - Model No. 88. Heavy-duty design for long wear. Quickly
adjusted to carry from 6 to 10 bricks.
Product
No.
Mfg.
No.
314552-C
15391
Description
Order
Mult.
Weight
Undercut Saw
1/6/36
1.100
The product representations in this catalog are for reference only,
and are subject to change without notice.
Unit
Cost
21.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
304433-C
16510
Brick Tongs
1/0/12
5.000
Unit
Cost
21.99 EA
10-159
HAND TOOLS
CONC RETED/ RYWAL TO LS
HAND TOOLS
CONCRETE/DRYWALL TOOLS
CONCR ETE/D RYWAL TO LS
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Marshalltown Trowel
Raker Joint - Model No. 89. Large 1-3/4" skate wheels; strong
Xtralite Cement Finishing Trowel - Model No. MXS66RE.
aluminum handle, contoured to fit the hand and
squared off at the end. Hardened nail,
adjustable to proper depth. Can be
securely tightened by slipping nail into
eye of spade bolt and twisting. 8-1/2" x
3".
California handle. Highest grade spring steel blade, properly shaped and
tempered. Fully rounded front end.
Forged aluminum alloy mounting.
Smooth finished, basswood handle is
securely attached. 16" x 4".
Product
No.
Mfg.
No.
324125-C
15502
Description
Order
Mult.
Weight
Joint Raker
1/0/12
.656
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
353450-C
13510
4x16 Cement Trowel
1/0/12
1.358
Unit
Cost
36.99 EA
CONCRETE /DRYWAL TO OLS
Unit
Cost
Marshalltown Trowel
12.49 EA
Pool Trowel - California pattern handle with short aluminum mounting.
Ends of blade are completely rounded.
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
DuraSoft® Notched Trowel - Cast aluminum alloy mounting is
securely attached with rivets to the tempered steel blade.
Resilient DuraSoft® handle provides a
soft feel, reduces fatigue, and offers
excellent durability.
Product
No.
Mfg.
No.
314471-C
337994-C
13114
13116
Description
Model No. SP14, 14" x 4"
Model No. SP16, 16" x 4-1/
2"
Order
Mult.
Weight
1/0/12
1/0/6
1.250
1.333
Unit
Cost
32.99 EA
35.99 EA
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
311059-C
311068-C
311139-C
15709
15806
15808
1/4" x 1/4", square notch
3/8" x 1/4", square notch
3/16" x 1/4", triangular notch
1/6/36
1/6/36
1/6/36
.909
.860
.860
Unit
Cost
16.79 EA
16.79 EA
16.79 EA
Spred-Krete With Hook - For spreading, grading, and striking off
concrete. 12-gauge cold-rolled steel blade. Steel ferrule
welded to blade holds contoured handle
firmly in place, superior to jam type
connector. 20" x 4".
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
Finish Trowel - Trowels have a strong zinc alloy mounting: resists rust
and provides the extra stiffness and weight
preferred by many finishers. High-grade
spring steel blade; tempered, ground
and polished. Smooth, natural finish
basswood handles securely attached.
Product
No.
Mfg.
No.
331046-C
14726
300861-C
14828
Description
Model No. 826, Spred-Krete
with hook
Model No. 828, 54" handle
for No. 826
Order
Mult.
Weight
Unit
Cost
1/0/6
2.750
14.99 EA
1/0/6
1.417
9.99 EA
NOTE: Handle must be ordered separately.
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
370827-C
370835-C
13328
13348
Model No. MCS64, 14" x 4"
Model No. MCS66, 16" x 4"
1/0/12
1/0/12
1.708
1.708
Unit
Cost
Wood Float - Model No. 44. Clear seasoned wood, finished smooth
and equipped with smooth handle. Size: 12" x 5".
38.99 EA
42.99 EA
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
Xtralite Cement Finishing Trowel - California handle. Blade is
properly shaped. Highest grade spring steel. Forged aluminum alloy
mounting. Smooth finished, basswood
handle is held firmly by a brass nut and
washer.
Product
No.
Mfg.
No.
Description
323983-C
14502
12x5-3/4 Redwood Float
Order
Mult.
Weight
1/0/6
.242
Unit
Cost
9.99 EA
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Product
No.
Mfg.
No.
337344-C
333927-C
333936-C
313718-C
313726-C
13224
13208
13228
13248
13268
10-160
Description
Order
Mult.
Weight
Model No. MXS57, 14" x 3"
Model No. MXS62, 12" x 4"
Model No. MXS64, 14" x 4"
Model No. MXS66, 16" x 4"
Model No. MXS81, 18" x 4"
1/0/12
1/0/12
1/0/12
1/0/12
1/0/6
1.000
1.000
1.271
1.500
1.500
Unit
Cost
32.99 EA
29.99 EA
32.99 EA
35.99 EA
39.99 EA
Round End Magnesium Float - Model No. 143. Fully rounded
ends help prevent float marks. Comfortable wood handle. Size: 16" x
3-1/8".
Product
No.
Mfg.
No.
Description
370797-C
14603
16" Magnesium Float
Order
Mult.
Weight
1/0/6
1.667
Unit
Cost
22.99 EA
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
CONCRETE/DRYWALL TOOLS
CONC RETED/ RYWAL TO LS
CONCR ETED/ R YWAL TO OLS
Marshalltown Trowel
Marshalltown Trowel
Magnesium Float - Made of very hard magnesium. The position of
Round End Magnesium Bull Float - Model No. B48FR. Made
from the finest extruded magnesium alloy. Lightweight, long wearing and
properly balanced. Both ends are
rounded to help eliminate finishing
marks. Requires threaded male end
handle. 48" x 8".
Product
No.
Mfg.
No.
Description
338646-C
330500-C
14604
14602
Model No. 145, 16" x 3-1/8"
Model No. 146, 20" x 3-1/8"
Order
Mult.
Weight
1/0/6
1/0/6
1.800
2.333
Unit
Cost
21.99 EA
26.99 EA
Marshalltown Trowel
Magnesium Float - Made of very hard magnesium. DURASoft™
handle provides a soft feel while reducing fatigue.
Mfg.
No.
Description
316040-C
316059-C
14610
14611
Model No. 145D, 16" x 3-1/8"
Model No. 146D, 20" x 3-1/8"
Order
Mult.
Weight
1/0/6
1/0/6
1.650
2.000
Unit
Cost
Marshalltown Trowel
The cast construction allows more knuckle clearance
and placement of the durable structural
foam handle gives the float perfect
balance. Torque pad screws. Size: 16" x
3-1/8".
Description
370800-C
14607
16" Magnesium Float
353442-C
14720
48" Rnd Magnesium Float
Order
Mult.
Weight
0/0/1
11.250
Unit
Cost
144.99 EA
CONCR ETED/ R YWAL TO OLS
Marshalltown Trowel
polypropylene bristles set solidly into a natural
lacquered hardwood block. Threaded
hole accepts any standard broom
handle. Commonly used to apply
nonslip finish to newly finish concrete
surfaces. Uses Marshalltown model No.
PSH753 and PSH753-L handles. Also
accepts any standard threaded broom
handle.
Mfg.
No.
Description
16420
24" Concrete Broom
Order
Mult.
Weight
1/0/6
2.000
Unit
Cost
16.49 EA
NOTE 1: Handle must be ordered separately.
Magnesium Float - Model No. 148. Made of the finest magnesium.
Mfg.
No.
Description
Product
27.99 EA No.
32.99 EA 352578-C
CONC RETED/ RYWAL TO LS
Product
No.
Mfg.
No.
24" Concrete Broom - Model No. 830. Long wearing 2-3/4" black
CONC RETED/ RYWAL TO LS
Product
No.
Product
No.
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Bull Float Handle - Model No. PB72L. Spring-loaded button-type
aluminum handle. Sections snap together quickly and do
not loosen during use. Does not have
threaded ends. Requires adaptor to use
with model No. B45 and B48FR bull
floats. 1-3/4" x 6’.
Order
Mult.
Weight
1/0/6
1.558
Unit
Cost
19.99 EA
CONC RETED/ RYWAL TO LS
Marshalltown Trowel
Magnesium Float - Model No. 148D. Made of the finest magnesium .
The cast construction allows and more knuckle
clearance. DURASoft™ handle
provides a soft feel while reducing
fatigue. Size: 16" x 3-1/8".
Product
No.
Mfg.
No.
Description
370878-C
14807
6 Bull Float Handle
Order
Mult.
Weight
1/0/6
2.167
Unit
Cost
31.99 EA
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Cement Edger - Model No. 36D. Blade of polished steel. Sturdy steel
Product
No.
Mfg.
No.
Description
316172-C
14613
16" Magnesium Float
Order
Mult.
Weight
1/0/6
1.560
Unit
Cost
24.99 EA
mountings. DuraSoft handle. Light and
easy-to-handle. Straight ends. 6" x 3".
Radius: 3/8".
CONC RETED/ RYWAL TO LS
Marshalltown Trowel
Magnesium Bull Float - Model No. B45. Float is made from the
finest extruded magnesium alloy. Lightweight, long-wearing,
and properly balanced. Requires
threaded male end handle. 45" x 8".
Product
No.
Mfg.
No.
Description
337317-C
14702
45" Magnesium Bull Float
Some products shown may need to be special ordered
for your convenience!
Order
Mult.
Weight
0/0/1
11.000
Unit
Cost
129.99 EA
Product
No.
Mfg.
No.
Description
355252-C
14142
6x3 Straight End Edger
Order
Mult.
Weight
1/0/6
.708
Unit
Cost
8.79 EA
10-161
HAND TOOLS
the smooth wood handle gives the tool perfect balance.
Both ends are beveled.
HAND TOOLS
CONCRETE/DRYWALL TOOLS
CONCR ETE/D RYWAL TO LS
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Marshalltown Trowel
Cement Edger - Model No. 136D. Blade of polished steel. Sturdy steel Taping Knife - Stainless steel blade with aluminum backing plate and
mountings. DuraSoft handle. Light and
easy-to-handle. Curved ends. 6" x 3".
Radius: 3/8".
Product
No.
Mfg.
No.
Description
355261-C
14146
6x3 Curved End Edger
DURASoft™ handle. Blade flexes for
feathering and temper weld construction
improves holding power.
Order
Mult.
Weight
1/0/6
.708
Unit
Cost
8.79 EA
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
Product
No.
Mfg.
No.
Description
Cement Groover - Model No. 180D. Sturdy steel mountings. DuraSoft
370606-C
370614-C
370622-D
14321
14323
14325
Model No. 3508SD, 8" x 3"
Model No. 3510SD, 10" x 3"
Model No. 3512SD, 12" x 3"
handle. Stainless steel blade, 6" x 3", 1/2" x
1/2" groove.
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
.183
.217
.246
Unit
Cost
12.49 EA
14.49 EA
14.99 EA
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Circle Cutter - Model No. CC766. Hardened cutter wheel and center
pin will remain sharp indefinitely. Cuts sharp
clean circles of up to 16" in diameter
with only 1 hand. Measure accurately
on the calibrated steel shaft.
Product
No.
Mfg.
No.
Description
330537-C
14102
Cement Groover
Order
Mult.
Weight
1/0/6
.833
Unit
Cost
13.49 EA
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
Xtralite Plasterer’s Finishing Trowel - California handle.
Curved handle. Forged aluminum alloy mounting. Light but strong. Flexible
blade of spring steel. Tempered, ground,
and polished. Basswood handle.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
305677-C
14556
Circle Cutter
1/6/60
.560
Unit
Cost
10.99 EA
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Drywall Corner Trowel - Model No. 23D. Lightweight perfectly
balanced tool with a 1-piece flexible stainless steel blade.
Aluminum mounting with DuraSoft™
handle. 4" x 5". Angle: 103°.
Product
No.
Mfg.
No.
303038-C
12126
323796-C
12130
Description
Model No. MXS2, 11-1/2" x
4-1/2"
Model No. MXS4, 11-1/2" x
4-3/4"
Order
Mult.
Weight
Unit
Cost
1/0/12
1.250
29.99 EA
1/0/12
1.000
29.99 EA
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
Taping Knife - Tapered blue steel blade with aluminum backing plate
and DURASoft™ handle. Blade flexes for
feathering and temper weld construction
improves holding power.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355243-C
15323
Drywall Corner Trowel
1/2/48
.833
Unit
Cost
14.49 EA
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Drywall Tape Reel - Model No. 31. All steel drywall tape reel is plated
to prevent rust. Holds all standard tape rolls
up to 500’. Hangs on belt for easy
dispensing; quick opening design
makes changing tape easy. 10-1/4" x
3".
Product
No.
Mfg.
No.
Description
370576-C
370584-C
370592-C
14337
14338
14339
Model No. 3508D, 8" x 3"
Model No. 3510D, 10" x 3"
Model No. 3512D, 12" x 3"
10-162
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
.183
.217
.246
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
370746-C
16331
Drywall Tape Reel
1/0/24
.708
Unit
Cost
12.49 EA
10.99 EA
11.49 EA
12.49 EA
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
CONCRETE/DRYWALL TOOLS
CONC RETED/ RYWAL TO LS
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Marshalltown Trowel
Drywall Taper - Model No. 798D. Banjo style drywall taper made from Swivel Pole Sander - Die-cast aluminum base, bonded foam rubber
Product
No.
Mfg.
No.
Description
382078-C
16375
Drywall Taper
pad, positive lock clamps.
Order
Mult.
Weight
0/0/1
4.380
Unit
Cost
139.99 EA
Product
No.
Mfg.
No.
313742-C
14426
313750-C
14827
CONC RETED/ RYWAL TO LS
Saint-Gobain Tech Fabrics
2-In-1 Drywall Tape Applicator - FibaTape 2-in-1 drywall tape
applicator tool reduces drywall taping time. For use with
self-adhesive fiberglass mesh tape.
Can be used on flat seams as well as
inside corners. Trigger actuated cutoff
knive cuts tape fast and clean. Accepts
tape rolls up to 8" in diameter.
Product
No.
Mfg.
No.
Description
335096-C
511138
Drywall Tape Applicator
Description
Model No. 26, pole sander
head, 9-3/8" x 3-1/4"
Model No. 28, 48" hardwood
handle
Order
Mult.
Weight
Unit
Cost
1/2/24
1.250
15.99 EA
1/0/12
1.000
7.49 EA
NOTE: Order sander head and handle separately.
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Drywall Hand Sander - Model No. 20D. Dura soft handle, bonded
foam rubber pad, positive lock clamps. For precut or half
sheet sandpaper.
Order
Mult.
Weight
1/0/6
1.458
CONC RETED/ RYWAL TO LS
Unit
Cost
25.99 EA Product
No.
Marshalltown Trowel
303046-C
Mixer - Model No. 819. Ideal for mixing paint and drywall mud. 3/8" hex
shaft fits any 1/2" or larger slow speed
drill. 28" long. Blade size: 8-1/2" x 4-1/
2".
Mfg.
No.
Description
16320
Drywall Hand Sander
Order
Mult.
Weight
1/0/6
.229
Unit
Cost
12.49 EA
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Stainless Steel Mud Pan - Professional quality, heavy-gauge with
all corners Heli-arc welded to form smooth, seamless inside
corners.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
313769-C
16389
Mud Mixer
1/0/6
2.000
Unit
Cost
15.79 EA
CONC RETED/ RYWAL TO LS
Marshalltown Trowel
Drywall Lifter and Rasp - This unique tool is a drywall and
paneling lifter, nonclogging rasp, and a bottle opener all-in-1.
Conveniently stores in your back pocket
when not in use. Nonclogging rasp with
protective guides. Lifts all standard
sizes of drywall sheets. Lightweight,
compact, fits in pocket. Bottle opener
integrated into lifter.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
338001-C
338249-C
16395
16396
Model No. 6395, 14"
Model No. 6396, 16"
1/0/12
1/0/12
1.250
1.342
Unit
Cost
17.99 EA
19.49 EA
CONCR ETE/DR YWAL TO OLS
Marshalltown Trowel
Galvanized Mud Pan - Tapered ends and sides. Sides are sheared
to clean knives easily.
Product
No.
Mfg.
No.
Description
311040-C
14589
Drywall Lifter
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
Order
Mult.
Weight
1/0/6
.485
Unit
Cost
9.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
304670-C
337676-C
16393
16392
Model No. 813, 14"
Model No. 6392, 16"
1/0/12
1/0/12
1.330
1.333
Unit
Cost
9.99 EA
9.99 EA
10-163
HAND TOOLS
aluminum. Dura soft handle. Adjustable web side
handle. 2 compartments with quick
opening latches. Serrated cut-off blade.
HAND TOOLS
CONCRETE/DRYWALL TOOLS
Continued From Previous Column
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
Nu-Pride Plastic Mud Pan - Model No. 914. Resistance to
Product
No.
Mfg.
No.
chemicals and temperature changes make this mud pan very durable and
long lasting. Features a metal scraping
blade. Textured outside for sure grip,
smooth inside so mud won’t stick.
Tapered ends and sides. 14" long.
330555-C
348172-C
14406
14408
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
370843-C
16114
12" Plastic Mud Pan
1/0/12
.675
Unit
Cost
4.29 EA
Description
Model No. 39, coarse cell
Model No. 40, molded black
rubber
Order
Mult.
Weight
1/0/24
1/0/24
.833
.781
Unit
Cost
8.49 EA
9.99 EA
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Neoprene Float - Model No. 49. Nonporous black neoprene pad
specially bonded to aluminum backing plate. Used for
tile grouting, spreading other materials
including brown coat. Comfortable
handle securely attached. 12" x 4" x 1/
4".
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
Nu-Pride Spraymate™ Drywall Hopper Gun - Model No.
HG692. Sprays both texture and joint compound. Full length trigger. 7
different orifice sizes with a knurled orifice
adjustment knob. Plastic hopper has 1-3/4
gallon capacity with no corner seams to clog.
Offset connector allows ceiling or wall spraying.
Delivers 7 CFM at 25 P.S.I. Weighs 6 lb.
Product
No.
Mfg.
No.
Description
356360-B
14582
Drywall Hopper Gun
Order
Mult.
Weight
0/0/1
5.800
Unit
Cost
69.99 EA
CONCR ETE/D RYWAL TO LS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
338079-C
14424
12x4 Neoprene Float
1/0/12
.750
Unit
Cost
9.29 EA
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Green Plastic Foam Float - Model No. 46G. Fine cell plastic foam
pad specially bonded to aluminum backing plate. Wears well,
does excellent job on sandy surfaces.
Comfortable handle securely attached.
9-1/2" x 4" x 3/4".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
337919-C
14416
9-1/2"plastic Foam Float
1/0/24
.417
Unit
Cost
8.99 EA
CONCRETE /DRYWAL TO OLS
Marshalltown Trowel
Marshalltown Trowel
Tile Grouters Float - Model No. 43. Pure gum-rubber face bonded to
dense rubber pad, then cemented to aluminum backing
of the most advanced sprayers available with many exclusive features not with smooth handle. Edges are
beveled, 2 front corners rounded for
found on other guns. Sprays both texture and joint
ease of spreading. Pad size: 9" x 4" x 3/
compound. Full length trigger. 7 different orifice
4".
sizes with a knurled orifice adjustment knob. Air
Sharpshooter 1™ Drywall Hopper Gun - Model No. 791. One
control at the gun instead of at the pump. Plastic
hopper has 1-3/4 gallon capacity with no corner
seams to clog. Offset connector allows ceiling or
wall spraying. Delivers 7 CFM at 25 P.S.I. Weighs 6
lb.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
338095-C
14422
Tile Grouters Float
1/0/24
.708
Unit
Cost
11.79 EA
CONCRETE /DRYWAL TO OLS
Clark Tile
Poly-Pro V-Notch Trowel - Professional size disposable tool. Fully
Product
No.
Mfg.
No.
Description
337900-C
16356
Drywall Hopper Gun
Order
Mult.
Weight
0/0/1
5.800
Unit
Cost
notched and angled for right or left hand use. Comfortable
grip featuring Thrifty Trowel construction.
99.99 EA
CONCR ETE/D RYWAL TO LS
Marshalltown Trowel
Rubber Floats - Sponge rubber pad cemented to aluminum backing;
smooth handle. Pad 5/8". Size: 9" x 4".
Product
No.
Mfg.
No.
302279-C
14404
Continued Next Column
10-164
Description
Order
Mult.
Weight
Model No. 38, fine cell
1/0/24
.730
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
377821-E
377848-E
377856-E
377864-E
377872-E
377880-E
377899-E
PT-062
PT-093
PT-125
PT-187
PT-250
PT-375
PT-500
1/16", black
3/32", white
1/8", red
3/16", orange
1/4", yellow
3/8", green
1/2", tan
1/12/72
1/12/72
1/12/72
1/12/72
1/12/72
1/12/72
1/12/72
.236
.236
.236
.236
.236
.236
.236
Unit
Cost
1.49 EA
1.49 EA
1.49 EA
1.49 EA
1.49 EA
1.49 EA
1.49 EA
8.49 EA
Your representative can give you details
on product availability and shipping requirements!
HAND TOOLS
CONCRETE/DRYWALL TOOLS
CONC RETED/ RYWAL TO LS
STAP LEGU NS
Clark Tile
Poly-Pro Grout Trowel - Professional size disposable tool. Right or Extra Heavy-Duty Electric Staple And Brad Gun left hand use. Comfortable grip featuring Thrifty
Trowel construction.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
377910-E
GFF-800
Grout Trowel
1/12/72
.278
Unit
Cost
Heavy-duty solid-state electronic circuitry with 10’ cord. Ergonomic
cushion-grip, On/Off safety trigger lock,
and patented jam-proof mechanism.
All-steel channel and track for durability.
Flush front design to staple in tight
corners. Shoots model No. T50 staples,
1/4", 5/16", 3/8", 1/2", 9/16", and
CEILTILE. Drives model No. BN1810 5/
8" nails. 14A of surge power.
2.29 EA
Cobra Heavy-Duty Staple Gun - Squeezing trigger puts pressure
on the front of the gun to ensure staples are driven flush to
surface. Does not kick up like traditional
staple guns. Requires less force to
staple. Rubber soft grip handle cover for
comfort. All metal housing. Staples
remaining window. Quick load staple
chamber slides away for easy loading
and hassle free jam clearance. Flush
design for use in corners and other tight
spots. Capable of rapid fire. Built-in wire
attachment. Uses 1/4" to 9/16"
Powershot™ or Arrow® T50 staples.
1000 staples per pack. Shoots 9/16"
brads.
Product
No.
Mfg.
No.
Description
320692-B
8000
Cobra Staple Gun
Order
Mult.
Weight
1/0/5
1.988
Product
No.
Mfg.
No.
Description
342858-B
ETFX50
Electric Staple Gun
Order
Mult.
Weight
1/0/6
3.500
Unit
Cost
49.99 EA
STAP LEGU NS
Heavy-Duty Electric Brad Gun - Nail Master™ 2. Heavy-duty
with ergonomic styling and solid state circuitry. Nonslip cushioned
grip and superb balance assures
effortless work. Jam-proof mechanism.
Trigger and surface contact safety
locks. Nonmarring tip. Nail penetration
adjsutment dial. Includes storage case.
14A. Uses Arrow® brads model No.
BN1810 5/8", BN1812 3/4", BN1816 1",
and BN1820 1-1/4".
Unit
Cost
35.99 EA
STAPLEGUNS
Electric Staple Gun and Brad Nailer - Heavy-duty
Sharpshooter™. Flush-nose design allows stapling close to edges. Dual
power for hard and soft materials. All
metal drive channel for better
penetration. Safety trigger lock. Solid
state circuitry and double insulation.
Contoured grip for extra comfort. Drives
Stanley TRA series staples, 1/4" to 9/
16", and Arrow® model No. T-50 size
staples, plus Stanley model No.
SWKBN050, 1/2", and SWKBN625, 5/
8", brads.
Product
No.
Mfg.
No.
Description
373222-B
TRE550
Electric Staple Gun
Order
Mult.
Weight
1/0/4
2.200
Unit
Cost
34.99 EA
Product
No.
Mfg.
No.
Description
343048-A
ET200
Electric Brad Gun
Order
Mult.
Weight
1/0/6
5.333
Unit
Cost
59.99 EA
STAP LEGU NS
Hammer Tacker - Heavy-duty, hammer tacker, new soft cushion
ergonomic grip for improved comfort and ease of
handling.
Product
No.
Mfg.
No.
Description
334285-C
PHT250C
Hammer Tacker
Order
Mult.
Weight
1/0/6
2.333
Unit
Cost
35.99 EA
STAP LEGU NS
Heavy-Duty Hammer Tacker - Speeds up installation of carpeting,
roofing materials, or insulation. Balanced for 1-hand
operation. Easy to operate and load
and features a rubber hammer type
grip. Durable nickel-plated steel
construction. Uses 1/4", 5/16", and 3/8"
Stanley TRA series and Arrow® staples. Carded.
Service is our priority!
Our commitment is to meet your needs!
Product
No.
Mfg.
No.
Description
358754-C
PHT150C
Hammer Tacker
Order
Mult.
Weight
1/0/6
2.100
Unit
Cost
32.99 EA
10-165
HAND TOOLS
STAPLEGUNS
HAND TOOLS
STAPLE GUNS
STA PLEGU NS
STAPLE GUN S
Professional Heavy-Duty Staple Gun - Easy squeeze design Staple Gun - Heavy steel construction, chrome finish, precision
with exclusive comfort-grip. Slide-in staple load. Uses Power Crown model engineered. Drives staples flush to surface.
No. STCR5019 staples. Durable
Wedge-pointed staples spread to lock
harvest gold finish.
themselves in wood. Loads 85 model No.
T-50 staples of .050" wire.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
373281-B
PC4000
H/d Staple Gun
1/0/12
2.284
Unit
Cost
Product
27.99 EA No.
301774-A
STA PLEGU NS
Mfg.
No.
Description
Order
Mult.
Weight
T50
Staple Gun
1/0/12
2.271
Unit
Cost
19.99 EA
STAPLE GUN S
Hammer Tacker - Compact stapling tool that swings like a hammer.
Staple Gun - Built-in staple height adjustment guide drives both flat or
round head staples. 2-wire adjustment allow
for stapling wire from 1/4" to 3/16" diameter.
Staples packed 1000 per box. Uses model No.
256, 257, and 259 round staples or model No.
205, 206 and 208 flat staples.
1-hand operation. For repetitive tacking and light
nailing jobs where speed is important.
Drives 1/4" and 3/8" Bostitch model No.
STCR5019 Power Crown staples.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315567-C
H30-8
Hammer Tacker
1/0/12
1.750
STA PLEGU NS
Unit
Cost
44.99 EA Product
No.
343307-C
PowerSlam™ Hammer Tacker - AntiJam™ design for maximum
productivity. Long reach knuckle saver handle with nonslip comfort
grip. Die-cast frame and hardened
components for extreme durability.
High-capacity bottom load magazine
with staple count indicator. Extra wide
foot plate prevents tearing and marring.
Uses 1/4" to 1/2" model No. STCR5019 PowerCrown™ staples.
Product
No.
Mfg.
No.
Description
396923-B
PC2K
Powerslam Hammer Tacker
10-166
Order
Mult.
Weight
1/0/4
1.750
Unit
Cost
62.99 EA
Mfg.
No.
Description
Order
Mult.
Weight
T2025
Dual Staple Gun
1/0/12
1.833
Unit
Cost
29.99 EA
STAPLE GUN S
Wiring Staple Gun - For stapling all types of low voltage wire from 1/
4" (6mm) to 5/16" (8mm) in diameter. Ideal for
installing wiring for telephones, cable TV,
antennas, intercoms, and alarm systems. All
steel construction. Chrome finish. Pateneted
jam proof mechanism. Grooved guide
positions wire. Round crown staples fit
snugly around wire. Uses model No. 378,
and 379 staples.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303224-C
T37
Wire Staple Gun
1/0/12
2.083
Unit
Cost
44.99 EA
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
STAPLE GUNS
STAPLEGUNS
STAP LEGU NS/ TAPLES
Wiring Staple Gun - For stapling all types of wiring from 1/4" (6mm)
to 5/16" (8mm) in diameter. Ideal for installing
wiring for telephones, antennas, intercoms,
and alarm systems. Can be used on plastic
cable, hollow tubing, radiant heat cable, and
virtually any appliction of wire. All steel
construction. Chrome finish. Patented jam
proof mechanism. Grooved guide positions
wire. Holds 2 strips of 15 insulated staples
model No. 591188. 300 staples per pack.
Heavy-Duty Electric Staple And Brad Gun - Professional
Mfg.
No.
357669-C
T59
Description
Order
Mult.
Weight
Wiring Staple Gun
1/0/12
2.083
Unit
Cost
49.99 EA
Product
No.
Mfg.
No.
Description
369780-C
ETF50PBN
Electric Staple Gun
Order
Mult.
Weight
1/0/6
3.000
Unit
Cost
57.99 EA
STAP LEGU NS
Hammer Tacker - All steel construction, chrome finish. 1-hand
operation. Shatterproof plastic handle. Uses model
No. 304IP, 305IP, and 306IP staples.
STAPLEGUNS
Sheathed Cable Staple Gun - For stapling all types of nonmetallic
sheathed cable (Romex) up to 1/2". Patented jam proof
mechanism. All steel construction. Uses
model No. 7510S and 7514S staples,
packed 1000 per box.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
369748-C
HT30
Hammer Tacker
1/0/12
1.167
Unit
Cost
24.99 EA
STAP LEGU NS
Hammer Tacker - Heavy-duty, with perfect balance. All-steel
construction, chrome finish. 1-hand operation.
Shatterproof plastic handle. Loads 170
model No. T50 staples.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
369799-C
T75
Wiring Staple Gun
1/0/12
2.250
Unit
Cost
44.99 EA
STAPLEGUNS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301747-C
HT50
Hammer Tacker
1/0/12
2.375
Unit
Cost
49.99 EA
Electric Staple And Brad Gun - All solid state circuitry, rugged,
lightweight high-impact plastic housing. All steel channel and
track. Flush design to staple in tight
corners. Jam-proof mechanism. Uses
all sizes of model No. T-50 staples.
Uses model No. BN1810 5/8" brad
nails.
Hammer Tacker - Huskier, heavy-duty model. Loads 52 staples of
Product
No.
Mfg.
No.
Description
Unit
Cost
Product
No.
Mfg.
No.
Description
389781-C
ETF50BN
Electric Staple/brad Gun
44.99 EA
317151-C
HT65
Hammer Tacker
Order
Mult.
Weight
1/0/6
2.667
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
STAP LEGU NS
.062 wire with 1" crown width in 3/4" leg length.
Chrome-plated. Uses model No. 65S
staples.
Order
Mult.
Weight
1/0/6
4.500
Unit
Cost
99.99 EA
10-167
HAND TOOLS
Product
No.
grade Electro-matic model incorporates extra heavy-duty components
including long-lasting trigger switch and
10’ cord. All solid state circuitry, rugged,
lightweight, high-impact plastic housing.
All steel channel and track for durability.
Flush front design to staple in tight
corners. Jam proof mechanism. Uses
all sizes of model No. T-50 staples.
Uses model No. BN1810 5/8" brad
nails.
HAND TOOLS
STAPLE GUNS
STA PLEGU NS
STAPLES
Heavy-Duty Plier-Type Stapler - Loads 85 staples in 2 sizes: 1/4" T50 Staples - Contractor pack. 5000 staples per box. For use with
and 3/8". Deep 2-1/2" throat reach. Cam-activated power
leverage. Removable staple channel. Visible refill
window. Hand-guide loop. Uses model No. 354
and 356 staples.
Arrow® model No. HT-50A, T-50, and T-55.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
348617-C
P35
Plier Stapler
1/12/36
1.139
Unit
Cost
27.99 EA
STA PLEGU NS
3-G’s Supply
Hammer Tacker Staples - For use in Arrow® T50 and HT50,
Rapid® 11-1/4", and Senco® H06. Contractor pack, 5000.
Product
No.
Mfg.
No.
317847-E
317874-F
317883-F
PF6
PF8
PF9
Description
Order
Mult.
Weight
1/4"
5/16"
3/8"
1/0/20
1/0/20
1/0/20
1.150
1.350
1.500
Unit
Cost
5.99 EA
6.49 EA
6.49 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
314706-D
314862-D
349410-D
504IP
505IP
506IP
1/4"
5/16"
3/8"
1/0/20
1/0/20
1/0/20
1.300
1.450
1.800
Unit
Cost
11.49 EA
11.99 EA
13.79 EA
STAPLES
STA PLEGU NS
3-G’s Supply
Hammer Tacker Staples - Same as Stanley Bostitch STCR5019
Staple - For use with Arrow® staple guns model No. T2025, ET20, and
ET2025. 5000 staples per box.
staples. Contractor pack, 5000.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
317892-E
317909-F
FB6
FB10
1/4"
3/8"
1/0/20
1/0/20
1.150
1.500
Unit
Cost
5.99 EA
6.49 EA
STA PLEGU NS
3-G’s Supply
Hammer Tacker Staples - Same as Duo-Fast 5010C staples. 5/
16". Contractor pack, 5000.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
317927-F
5010C
5/16" Tacker Staple
1/0/20
1.500
Product
No.
Mfg.
No.
343609-D
343633-D
343641-D
377791-E
205
206
208
2009
Unit
Cost
Description
5/16"
3/8"
1/2"
9/16" (model No. ET2025
only)
Order
Mult.
Weight
1/5/30
1/5/30
1/5/30
1/5/30
.233
.300
.367
.397
Unit
Cost
2.79 EA
2.99 EA
2.99 EA
3.29 EA
STAPLES
6.49 EA
STA PLEGU NS
T50 Staples - For use with Arrow® model No. HT-50A, T-50 and T55.
Staple - Round head staples for use with Arrow® staple gun model No.
T25, T2025, and ET2025. 1000 staples per pack.
All staples packed 1250 staples per pack.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
322962-D
322970-D
303801-D
256
257
259
3/8" round head
7/16" round head
9/16" round head
5/0/100
5/0/100
5/0/100
.290
.340
.400
Unit
Cost
2.99 PK
2.99 PK
2.99 PK
STAPLES
Staple Round Head - For use with Arrow® staple gun model No.
T37. 1000 staples per pack.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
301872-D
301881-D
301890-D
301916-D
307448-D
301907-D
322989-D
504
505
506
508
509
50CT
506SS1
1/4"
5/16"
3/8"
1/2"
9/16"
Ceiltile
Stainless steel, 3/8" only
4/0/80
4/0/80
4/0/80
4/0/80
4/0/80
4/0/80
1/5/40
.341
.375
.419
.550
.600
.550
.425
Unit
Cost
3.29 PK
3.29 PK
3.79 PK
3.99 PK
4.29 PK
4.49 PK
12.79 PK Product
No.
303356-D
303429-D
10-168
Mfg.
No.
Description
378
379
1/2"
9/16"
Order
Mult.
Weight
5/20/100
5/20/100
.400
.440
Unit
Cost
3.49 PK
3.79 PK
Save time by letting us locate those
hard-to-find items for you!
HAND TOOLS
STAP LES
Insulated Staple - For use with Arrow® staple gun model No. T59.
Heavy-Duty Staples - 600 series. For use in Stanley model No.
TR70, TR75, TR80, and TRE1000, Swingline No. 800, 800X,
900, 1000, 10060, 34301, 34302, and 80020. 1000
per pack.
300 staples per pack.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
357677-D
357685-D
591188
591188BL
1/4", clear
1/4", black
1/0/40
1/0/40
.275
.275
STAPLES
Staple - Super Power™ staple specially coated for extra holding
For use with Arrow® staple guns model
No. T75. 1000 staples per pack.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
374822-D
369802-D
7510S
7514S
5/8"
7/8"
1/0/40
1/0/40
.825
1.075
Unit
Cost
Product
9.99 PK No.
9.99 PK 303151-D
303178-D
303186-D
303194-D
power. 303208-D
Mfg.
No.
Description
Order
Mult.
Weight
60430
60530
60630
60830
60930
1/4"
5/16"
3/8"
1/2"
9/16"
5/0/30
5/0/30
5/0/30
5/0/30
5/0/30
.267
.300
.317
.369
.385
Unit
Cost
2.79 PK
2.99 PK
3.29 PK
3.79 PK
3.79 PK
Unit
Cost
10.99 PK
11.99 PK
STAPLES
Heavy-Duty Staples - For use in Bostitch model No. H2B hammer
tacker. Bulk packed 5000 per box.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
353515-D
353523-D
194
196
1/4"
3/8"
1/0/20
1/0/20
1.250
1.450
Unit
Cost
15.49 PK
17.49 PK
STAPLES
Heavy-Duty Staples - For use in Bostitch model No. EHS50,
EHS300, ET5-8, H30-8, T5-8, T15, and T15C. 1000 per pack.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
353477-D
353485-D
353493-D
353507-D
584
586
588
589
1/4"
3/8"
1/2"
9/16"
5/0/100
5/0/100
5/0/100
5/0/100
.250
.320
.400
.420
We can become your single-source supplier
on many of the products you currently use!
Unit
Cost
3.29 PK
3.79 PK
4.49 PK
4.79 PK
10-169
HAND TOOLS
STAPLES
STAPLES
HAND TOOLS
STAPLES
Continued From Previous Column
STA PLES
FPC Corp.
Do it® Staples - Replacement staples to fit most of the popular brands
of tackers and hammer tackers. Guaranteed to fit. Staples
packed 1000 per box. (Arrow® T50 replacement staples
packed 1250 per box).
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
346753-E
314773-E
346708-E
346691-D
346646-E
346628-D
347609-E
314749-E
347583-D
347574-D
347404-E
347798-E
314730-E
347789-E
347770-E
347618-E
347217-E
314765-E
347173-E
347164-D
347146-D
346682-D
346673-E
369454-E
369810-E
370126-E
368946-D
368954-E
306398-E
306649-D
346753
314773
346708
346691
346646
346628
347609
314749
347583
347574
347404
347798
314730
347789
347770
347618
347217
314765
347173
347164
347146
346682
346673
369454
369810
370126
368946
368954
306398
306649
1/4" Staple
5/16" Staple
1/2" Staple
9/16" Staple
1/4" Staple
5/16" Staple
1/4" Staple
5/16" Staple
3/8" Staple
1/2" Staple
9/16" Staple
1/4" Staple
5/16" Staple
3/8" Staple
1/2" Staple
9/16" Staple
1/4" Staple
5/16" Staple
3/8" Staple
1/2" Staple
9/16" Staple
1/4" Staple
5/16" Staple
5/16" Staple
3/8" Staple
1/2" Staple
1/2" Staple
9/16" Staple
1/4" Staple
5/16" Staple
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
5/0/50
.250
.364
.425
.450
.150
.150
.275
.311
.325
.400
.400
.250
.311
.325
.400
.450
.275
.333
.350
.400
.450
.150
.175
.240
.240
.240
.240
.240
.160
.160
SKU Number
346753
314773
346717
346708
346691
Size
1/4"
5/16"
3/8"
1/2"
9/16"
Box Number
4
4
4
4
4
346646
1/4"
3
346628
5/16"
3
347609
1/4"
11
314749
5/16"
11
347583
347574
347404
347798
Continued Next Column
3/8"
1/2"
9/16"
1/4"
11
11
11
6
10-170
Unit
Cost
2.79 PK
2.79 PK
3.29 PK
3.29 PK
1.99 PK
1.99 PK
2.49 PK
2.79 PK
2.79 PK
2.99 PK
3.29 PK
2.49 PK
2.49 PK
2.79 PK
2.99 PK
3.29 PK
2.29 PK
2.49 PK
2.79 PK
2.79 PK
2.99 PK
1.99 PK
2.29 PK
3.29 BX
3.49 BX
3.79 BX
4.29 BX
4.79 BX
1.99 PK
1.99 PK
For Use In Tools
Arrow(R): T-50, T-55
ET-50, ETF-50, ETN-50
ETC-50K, HT-50A
B & D: 5700
Master Mechanic:
M5000, M5100,
M5500, 345694
Stanley-Parker:
TR60, TR85, TR100,
TRA100, TRE200,
PHT150
Swingline: 10401
Unifix: MS15, MS35V,
MS50V Do it(TM):
381829
Arrow(R): JT-21M,
JT-21CM
T-27
Master Mechanic:
M2100
Stanley-Parker: TR45
Unifix: MS05, MS40V
Bostitch: P4-8, P4-8P,
PC1000,
T15, T15C, T5-8,
T5-80C
T5-804, ET5-8, EHS-50
EHS300, H30-8
314730
347789
347770
347618
5/16"
3/8"
1/2"
9/16"
6
6
6
6
347217
314765
1/4"
5/16"
5
5
347173
347164
347146
346682
346673
3/8"
1/2"
9/16"
1/4"
5/16"
5
5
5
2
2
369454
5/16"
10
369810
370126
368946
368954
306398
306649
3/8"
1/2"
1/2"
9/16"
1/4"
5/16"
10
10
7
7
1
1
27175
B & D: 9700, 9701,
9713, 9715
Craftsman: 6846,6843,
6844
6845,68416, 68423,
68642
68643, 68472, 68471
Duo-Fast: CT-850,
CT-859,
XE5018, CT-50, HT550
Stanley-Parker: TR-70,
TR80, TRE50,
TRE100,
TRE300
Swingline: 22084,
22087
Bostitch: TG-3
Bostitch: TG-3
Stanley-Parker: TR-40
Swingline: 101, 260,
22083
Arrow(R): T2025
Arrow(R): T2025
Arrow(R): P22
Do it(TM): 306126
STAPLES
Power Crown™ Staples - Spring crown design puts staple legs
under tension for superior driving power. Use in Bostitch
tackers model No. T15, T15C, ET5-8,
T5-8D4, EHS300, H30-8, EHS50, and
PC1000.
Product
No.
Mfg.
No.
Description
300800-D
STCR50191/
4-1M
STCR50193/
8-1M
STCR50191/
2-1M
STCR50199/
16-1M
STCR50191/
4-6M
STCR50193/
8-5M
1/4" long, 7/16" crown, 1000
per pack
3/8" long, 7/16" crown, 1000
per pack
1/2" long, 7/16" crown, 1000
per pack
9/16" long, 7/16" crown,
1000 per pack
1/4" long, 7/16" crown, 6000
per pack
3/8" long, 7/16" crown, 5000
per pack
300980-D
301248-D
301453-D
346292-D
346284-D
Order
Mult.
Weight
Unit
Cost
5/0/100
.261
3.79 PK
5/0/100
.328
3.99 PK
5/0/100
.372
4.99 PK
5/0/20
.440
4.79 PK
1/0/20
1.200
19.49 PK
1/0/10
1.500
16.49 PK
Ace: 22084, 22087
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
STAPLES
STAPLES
RIVETI NG
Power Crown Staples - Spring crown design puts staple legs under Rivets - Produces a strong, permanent, tamper-proof joint quickly and
tension for superior driving power. Use in Bostitch
tacker No. H2B. Bulk packed 5000 staples
per pack.
Mfg.
No.
332747-D
SHCR50191/
4-5.8M
SHCR50193/
8-5M
332739-B
Description
Order
Mult.
Weight
Unit
Cost
1/4", 3/8" crown
1/0/20
1.150
25.99 PK
3/8", 3/8" crown
1/0/20
1.400
18.79 PK
RIV ETING
Product
No.
Mfg.
No.
358304-D
RSS1/8IP
358312-D
RMS1/8IP
358320-D
RLS1/8IP
358339-D
RSA1/8IP
358347-D
RMA1/8IP
358355-D
RLA1/8IP
358363-D
RSA5/32IP
358371-D
RMA5/32IP
358398-D
RLA5/32IP
358401-D
RSA3/16IP
358428-D
RMA3/16IP
358436-D
RLA3/16IP
358452-D
RSAW1/8IP
358460-D
RSAB1/8IP
Heavy-Duty Rivet Tool - Steel construction with nonslip Hi-Viz grip.
Spring-loaded handle ejects rivet stem automatically.
Sets 3/32", 1/8", 5/32", and 3/16"
diameter aluminum and steel rivets. 3/
32", 1/8", 5/32", and 3/16" nose pieces
store in handle. Extended nose for hard
to get at places.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
358711-C
RH200S
Heavy Duty Rivet Tool
1/0/12
1.500
Unit
Cost
18.99 EA
RIV ETING
Professional Twisted Rivet Tool - Twister’s head turns 360° to
get into tight corners and narrow spaces. Steel construction with
nonslip Hi-Viz grip. Spring-loaded handle
ejects rivet stem automatically. Sets 3/32", 1/
8", 5/32", and 3/16" diameter aluminum and
steel rivets. 3/32", 1/8", 5/32", and 3/16" nose
pieces store in handle.
Description
100 per box, steel, 1/8"
diameter, 1/8" grip range
100 per box, steel, 1/8"
diameter, 1/4" grip range
100 per box, steel, 1/8"
diameter, 1/2" grip range
100 per box, aluminum, 1/8"
diameter, 1/8" grip range
100 per box, aluminum, 1/8"
diameter, 1/4" grip range
100 per box, aluminum, 1/8"
diameter, 1/2" grip range
50 per box, aluminum, 5/32"
diameter, 1/8" grip range
50 per box, aluminum, 5/32"
diameter, 1/4" grip range
50 per box, aluminum, 5/32"
diameter, 1/2" grip range
50 per box, aluminum, 3/16"
diameter, 1/8" grip range
50 per box, aluminum, 3/16"
diameter, 1/4" grip range
50 per box, aluminum, 3/16"
diameter, 1/2" grip range
100 per box, aluminum/
white, 1/8" diameter, 1/8"
grip range
100 per box, aluminum/
brown, 1/8" diameter, 1/8"
grip range
Order
Mult.
Weight
Unit
Cost
1/0/10
.300
4.79 BX
1/0/10
.300
5.99 BX
1/0/10
.400
7.99 BX
1/0/10
.100
4.79 BX
1/0/10
.100
6.29 BX
1/0/10
.100
7.79 BX
1/0/10
.100
4.49 BX
1/0/10
.100
4.49 BX
1/0/10
.100
5.49 BX
1/0/10
.100
5.99 BX
1/0/10
.100
5.99 BX
1/0/10
.200
5.99 BX
1/0/10
.100
6.99 BX
1/0/10
.100
6.99 BX
RIVETI NG
Back-Up Plates - Washer type devices for use with rivets when joining
Product
No.
Mfg.
No.
358738-B
RHT300
Description
Order
Mult.
Weight
Twisted Rivet Tool
1/0/12
1.750
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
Unit
Cost
soft, pliable materials or when working with oversized
or irregular holes.
22.99 EA
Product
No.
Mfg.
No.
358665-E
WS1/8
358673-E
WA1/8
358681-E
WA3/16
Description
Steel, use with 1/8" diameter
rivet, 40 per card
Aluminum, use with 1/8"
diameter rivet, 30 per card
Aluminum, use with 3/16"
diameter rivet, 30 per card
Order
Mult.
Weight
Unit
Cost
1/10/100
.090
1.99 CD
1/10/100
.040
1.99 CD
1/10/100
.050
1.99 CD
10-171
HAND TOOLS
Product
No.
easily. Rivet will not strip out or vibrate loose like threaded
fasteners. For joining sheet metal, aluminum, fabrics, plastics,
and leather. Use on metal cabinets, aluminum doors and
windows, metal fixtures, automobiles, heating ducts, gutters,
and downspouts. Carded.
HAND TOOLS
SHARPENING STONE
Sharpeni g Stone
SH ARPENI NG
Back-Up Plates - Aluminum. Washer type devices for use with rivets Honing Oil - This oil is the right weight for use with all oil stones. 3 oz.
bottle.
when joining soft, pliable materials or when working
with oversized or irregular holes. 500 per pack.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
358487-D
358495-D
WA1/8BP
WA3/16BP
Use with 1/8" diameter rivet
Use with 3/16" diameter rivet
1/0/10
1/0/10
.600
.700
Unit
Cost
19.99 BX
21.99 BX
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
316303-C
340-2600
Honing Oil
0/0/1
.300
Unit
Cost
3.29 EA
SH ARPENI NG
Diamond Machine Tech.
RIVET TO LS
Ali Ind.
Mini Diamond Sharpening Stone - Flip open lid with keychain
Aluminum Oxide Combination Stone - For sharpening
woodcutting tools. Coarse grit on one side and a fine finishing grit on the
other. Aluminum oxide. 6" x 2" x 1".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
330655-D
6061
6x2 Economy Stone
1/0/10
1.914
for easy accessibility. Sharpen carbide tipped tools, composite
materials, ceramics, glass, and more. Diamond surface resists
loading and is easy-to-clean.
Unit
Cost
5.49 EA
SHARPEN ING
Ali Ind.
Combination Stone - For sharpening tools. Coarse grit on one side
and a fine finishing grit on the other. Made from industrial
quality silicon carbide. Use dry or with water or oil as lubricants
for finer edges.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
338435-C
341681-C
F70F
F70C
Fine grit
Coarse grit
1/0/12
1/0/12
.108
.108
Unit
Cost
11.49 EA
11.49 EA
SH ARPENI NG
Diamond Machine Tech.
Diamond Sharpening Stone - Folding sharpening system.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302620-D
302657-D
331082-D
6063
6060
6058
4" x 1-3/4" x 5/8"
6" x 2" x 1"
8" x 2" x 1"
1/0/10
1/0/10
1/0/10
.375
.850
1.225
Unit
Cost
Handles open to form a nonslip handle, then closes around stone to
protect it when not in use. Diamond
surface resists loading and is
easy-to-clean. 4".
6.79 EA
10.79 EA
12.99 EA
SHARPEN ING
Ali Ind.
Scythe Stone - For sharpening scythes, sickles, and mowing
machines. Made from industrial quality silicone carbide. 10" x 1-1/
4" x 3/4".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
307812-D
6055
Scythe Stone
1/0/10
.650
10-172
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
342491-C
342505-C
342580-C
FWF
FWC
FSKC
Fine grit
Coarse grit
Coarse grit, serrated knife
1/0/10
1/0/10
1/0/10
.240
.240
.230
Unit
Cost
24.99 EA
24.99 EA
26.99 EA
Unit
Cost
4.79 EA
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
*KENNEDY
Y
HAND TOOLS
*KEN NED
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
10-173
HAND TOOLS
*KENNEDY
*KEN NED
10-174
Y
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
*DURHAM
HAND TOOLS
*DU RHAM
Your representative can give you details
on product availability and shipping requirements!
10-175
HAND TOOLS
SHARPENING
SHARPEN ING
TO OLSTO RAGE
Diamond Machine Tech.
O Sullivan Industries
Diamond Sharpening Stone With Case - 6" bench or counter Base Cabinet - Finished in black and metalline laminates. Height
top sharpening stone. Ideal for kitchen use or honing small workshop
tools. Plastic base has nonskid rubber
feet and holes for bench mounting.
adjustable moisture-resistant feet. Ergonomically
designed extruded handles. Sturdy wood
drawer construction, adjustable shelves, 6
outlet power strip. 5 year limited warranty.
33-5/8" H. x 20-1/2" D. x 27-3/8" W. 78 lb.
Ready-to-assemble.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Product
No.
Mfg.
No.
Description
342513-C
342572-C
W6FP
W6CP
Fine
Coarse
1/0/10
1/0/10
.680
.680
224391-C
41492
1drawer 2dr Base Cabinet
Unit
Cost
44.99 EA
44.99 EA
Order
Mult.
Weight
Unit
Cost
0/0/1
80.000
89.99 EA
TO OLSTO RAGE
O Sullivan Industries
TO LSTORAGE
O Sullivan Industries
Tall Storage Cabinet - Finished in black and metalline laminates.
Ergonomically designed extruded handles. 5 year limited
warranty. 75-3/8" H. x 20-1/2" D. x 31-1/4" W.
Ready-to-assemble.
Product
No.
Mfg.
No.
Description
224322-B
41491
Tall Storage Cabinet
Order
Mult.
Weight
0/0/1
155.000
Unit
Cost
119.99 EA
O Sullivan Industries
Base Cabinet - Finished in black and metalline laminates.
Moisture-resistant feet. Ergonomically designed extruded
handles. Sturdy wood drawer construction.
5 year limited warranty. 33-5/8" H. x 20-1/
2" D. x 27-3/8" W. Ready-to-assemble.
Mfg.
No.
Description
224304-C
41490
Base Cabinet
10-176
Ergonomically designed extruded handles. 5 year limited
warranty. 24-3/4" H. x 12-1/2" D. x 27-3/
8" W. Weighs 40 lb.
Ready-to-assemble.
Product
No.
Mfg.
No.
Description
224313-C
41493
2 Door Hanging Cabinet
Order
Mult.
Weight
Unit
Cost
0/0/1
41.000
59.99 EA
TO OLSTO RAGE
O Sullivan Industries
Wall Organization Strip - 7-piece long handle tool storage kit.
Includes 2 universal mounting rails, 3 large funnels, 2-S
hooks, and mounting hardware.
Patented snap fit securely holds both
large and small items. Expandable and
flexible rail system. Mounting holes
appear every 1/2" to compensate for
any wall or shed construction. Grey.
TO LSTORAGE
Product
No.
Hanging Cabinet - Finished in black and metalline laminates.
Order
Mult.
Weight
Unit
Cost
0/0/1
98.000
99.99 EA
Product
No.
Mfg.
No.
Description
224876-C
44000
Long Handle Tool Kit
Order
Mult.
Weight
1/0/6
2.500
Unit
Cost
23.99 EA
Service is our priority!
Our commitment is to meet your needs!
HAND TOOLS
TOOL STORAGE
TO L STORAG E
TO OLSTO RAGE
O Sullivan Industries
Edsal
Wall Organization Strip - 8-piece work bench tool kit. Includes 2
Mobile Tool Cabinet - Mobile tool cabinet. Attractive and durable
steel 2-toned silvervein and black textured
powder-coat. Recessed, welded handles and
heavy-duty swivel casters with brake. 23" W. x
22" D. x 30" H.
universal mounting rails, 3 mini funnels, 1 tool holder, 2
storage cups with lids, and mounting
hardware. Patented snap fit securely
holds both large and small items.
Expendable and flexible rail system.
Mounting holes appear every 1/2" to
compensate for any wall or shed
construction. Grey.
Mfg.
No.
Description
224871-B
44001
Work Bench Tool Kit
Order
Mult.
Weight
1/0/6
2.500
Unit
Cost
20.99 EA
TO L STORAG E
O Sullivan Industries
Pegboard Hutch - Finished in black and metalline laminates.
Erogomically designed. 36-1/8" H. x 9-5/8" D. x 54-3/4"
W. 42 lb. Ready-to-assemble.
Product
No.
Mfg.
No.
Description
223905-A
PMB783D
Mobile Tool Cabinet
Order
Mult.
Weight
0/0/1
90.000
Unit
Cost
279.00 EA
TO OLSTO RAGE
Edsal
Wall Cabinet - 30" wall cabinet. Attractive and durable steel 2-toned
silvervein and black textured powder-coat.
Shelves adjustable on 1" centers.
Recessed, welded handles and single
lock security. Heavy-duty swivel casters
with brake. 30" W. x 12" D. x 30" H.
Product
No.
Mfg.
No.
Description
224383-C
41496
Pegboard Hutch
Order
Mult.
Weight
Unit
Cost
0/0/1
42.000
79.99 EA
TO L STORAG E
Edsal
Workbench - Attractive and durable steel 2-toned silvervein and black
textured powder-coat. 84" W. x 25" D. x
36" H.
Product
No.
Mfg.
No.
Description
223911-B
WCS123131
Steel Wall Cabinet
Order
Mult.
Weight
0/0/1
50.000
Unit
Cost
155.00 EA
TO OLSTO RAGE
Edsal
Storage Cabinet - 72" storage cabinet. Attractive and durable steel
2-toned silvervein and black textured
powder-coat. Shelves adjustable on 1"
centers. Recessed, welded handles and single
lock security. 36" W. x 18" D. x 72" H.
Product
No.
Mfg.
No.
Description
223875-B
603ST2584
6 Workbench
Order
Mult.
Weight
0/0/1
147.000
Unit
Cost
189.00 EA
TO L STORAG E
Edsal
Mobile Storage Cabinet - Mobile storage cabinet. Attractive and
durable steel 2-toned silvervein and black textured
powder-coat. Recessed, welded
handles and heavy-duty swivel casters
with brake. 28" W. x 22" D. x 30" H.
Product
No.
Mfg.
No.
Description
223902-B
PMB782C
Mobile Storage Cabinet
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
Order
Mult.
Weight
0/0/1
80.000
Product
No.
Mfg.
No.
Description
223891-B
CB721836
72" Storage Cabinet
Order
Mult.
Weight
0/0/1
115.000
Unit
Cost
259.00 EA
Unit
Cost
195.00 EA
10-177
HAND TOOLS
Product
No.
HAND TOOLS
TOOL STORAGE
TO LSTORAGE
TO OLSTO RAGE
Power Toolbox - Lift-out tray, 7" deep bottom storage for power tools. 26" Plastic Toolbox - Lift out tray, super deep bottom. Sturdy,
Solid brass hardware. Heavy-duty handle.
Overall size: 21-5/16" L. x 12-1/2" W. x
12-3/4" H. Gray.
Product
No.
Mfg.
No.
Description
338958-C
701
Gray Power Toolbox
recessed, oversized handle and heavy-duty latches.
V-groove lid design is convenient for
bracing materials while sawing. Large
size holds 24" level. Overall size: 26" L. x
11" W. x 11-3/8" H. Gray.
Order
Mult.
Weight
0/0/1
8.000
Unit
Cost
Product
No.
Mfg.
No.
Description
367494-C
681
26" Gray Toolbox
27.99 EA
Order
Mult.
Weight
1/0/2
8.000
Unit
Cost
25.99 EA
TO LSTORAGE
TO OLSTO RAGE
Tote-More With Drawer - Constructed of impact-resistant
20" Plastic Toolbox - Lift out tray, deep bottom. Sturdy, recessed,
oversized handle and heavy-duty latches. V-groove lid
design is convenient for bracing
materials while sawing. Overall size:
20-1/4" L. x 10-7/8" W. x 11-1/4" H.
Gray and yellow.
polypropylene. Will not rust, chip, dent, or peel. Includes a full
length 9-compartment drawer. 14-3/4"
L. x 9-1/8" W. x 6-7/8" H.
Product
No.
Mfg.
No.
Description
341398-C
311R
Tote-more W/drawer
Order
Mult.
Weight
1/0/4
2.375
Unit
Cost
Product
No.
Mfg.
No.
Description
367478-C
651YG
20" Gray/yellow Toolbox
9.99 EA
Order
Mult.
Weight
1/0/4
5.250
Unit
Cost
14.99 EA
TO LSTORAGE
TO OLSTO RAGE
13" Plastic Toolbox - 2 compartment lift out tray and
Lock Jaw Utility Box - Constructed of heavy-duty impact-resistant
plastic. Sturdy adjustable dividers allow you to
customize your organizer with up to 54
compartments. Seal tight lock jaw
latching system secures all your items.
14-1/2" x 3-3/8" x 11-3/4". Red case
with double cover organizer.
multicompartment top access storage. Convenient size for household
use. Overall size: 13-3/4" L. x 7-1/2" W.
x 5" H. Yellow.
Product
No.
Mfg.
No.
Description
311529-C
114
13" Yellow Toolbox
Order
Mult.
Weight
1/0/6
1.417
Unit
Cost
8.49 EA Product
No.
358126-C
10-178
Mfg.
No.
Description
5231
Lock Jaw Utility Box
Order
Mult.
Weight
1/0/4
2.500
Unit
Cost
10.79 EA
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
TOOL STORAGE
TO L STORAG E
TO OLSTO RAGE
Custom Leathercraft
Mason Bag - Heavy-duty canvas over gauge steel frame. 9" x 11"
handle. 36 to 53 adjustable compartments. 3-1/2" storage area
under cover. Outside accessory rack for
small tools. Solid brass hardware with
ABS drawbolt-type latch. Overall size:
20-3/4" L. x 11-1/2" W. x 13-7/8" H. Red
and steel gray.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
pocket on outside. 20" x 16" with suede leather
bottom.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
375349-C
304X
Tool/mason Bag
1/0/15
3.800
Unit
Cost
Unit
Cost
59.99 EA
TO OLSTO RAGE
300543-C
858
4 Drawer Tool Chest
1/0/2
11.500
44.99 EA
Klein Tools
Canvas Zipper Bag - Sturdy canvas bag with strong zipper.
Convenient storage for pliers, wrenches, and other tools. 7"
x 12". White.
Product
No.
Mfg.
No.
Description
318612-B
5139
Canvas Zipper Bag
Order
Mult.
Weight
1/0/6
.300
Custom Leathercraft
27-Pocket Tool Bag - 10" triple zippered tool bag with 18 multi-use
outside pockets and 9 inside pockets to organize
tools and accessories. Large side
pockets with loops to hold large handle
tools are zippered to prevent spillage of
tools when not in use. Padded web
carrying handle and adjustable shoulder
strap. Mesh zippered pocket for easy
view of pocket contents. 10" L. x 10" W. x
11" H.
TO L STORAG E
Unit
Cost
9.49 EA Product
No.
Mfg.
No.
Description
1538
10" 27-pocket Tool Bag
Order
Mult.
Weight
1/0/6
2.667
Unit
Cost
TO L STORAG E
Maasdam-Dead On/Hart
320165-C
16" Tool Bag - This heavy-duty, 18 oz. cotton belting fabric is water/
mildew-resistant. 1344 cu. in. capacity and
includes a wraparound web handle for maximum
strength. 16" L. x 7" D. x 12" tall.
Product
No.
Mfg.
No.
Description
332900-B
DO-MB16
16" Tool Bag
Save time by letting us locate those
hard-to-find items for you!
29.99 EA
TO OLSTO RAGE
Custom Leathercraft
Standard Bigmouth™ Tool Bag - Built from super tough, light
fabric for durability and long wear. Internal frame holds bag open
for easy access. Reinforced interior
bottom enables bag to keep its wide
profile. Padded sides and bottom keep
from scraping walls and floors. Opens
wide for easy access to bag’s contents.
17 interior pockets and 6 exterior
pockets keep tools organized. Color:
Black and tan. 12" L. x 8-1/2" W. x 8" H.
Order
Mult.
Weight
1/0/6
.550
Unit
Cost
22.99 EA
Product
No.
Mfg.
No.
Description
320101-B
1533
12" 23pockt Bigmouth Bag
Order
Mult.
Weight
1/0/6
1.583
Unit
Cost
19.99 EA
10-179
HAND TOOLS
4-Drawer Plastic Tool Chest - Lift back cover, lock bar, recessed
HAND TOOLS
TOOL STORAGE
TO LSTORAGE
TO OLSTO RAGE
Custom Leathercraft
Custom Leathercraft
Large Bigmouth™ Tool Bag - Built from super tough, light fabric 37-Pocket Double Traytote™ Bag - 2 pockets inside and 35
for durability and long wear. Internal frame holds bag open
for easy access. Reinforced interior
bottom enables bag to keep its wide
profile. Padded sides and bottom keeps
from scraping walls and floors. Opens
wide for easy access to bag’s contents.
12 interior pockets and 10 exterior
pockets keep tools organized. Color:
Black and tan. 16" L. x 8-1/2" W. x 10"
H.
Product
No.
Mfg.
No.
Description
320138-C
1534
16" 22pockt Bigmouth Bag
Order
Mult.
Weight
1/0/6
3.083
outside. Double 11" x 6" multicompartment plastic tray included, slides
securely in to bottom of bag. Pockets for
cordless drill, cell phone, 2-way radio,
etc. 24" L. x 9" W. x 12" H.
Unit
Cost
Product
No.
Mfg.
No.
Description
394424-C
1141
37-pocket Traytote Bag
27.99 EA
Order
Mult.
Weight
1/0/4
7.167
Unit
Cost
57.99 EA
TO OLSTO RAGE
Custom Leathercraft
Custom Leathercraft
12-Pocket Traytote™ Bag - 2 pockets inside and 10 outside.
Single 11" x 6" multicompartment plastic trays included, slides
securely into bottom of bag. Reinforced
web carrying handles. Opens wide for
easy access to bag. 12" L. x 8" W. x 12"
H.
5-1/2" multicompartment plastic tray, slides securely into bottom of pouch.
Box-shaped design prevents tipping. Pockets
for drill bits and tips, electrical tape strap, and
many other applications. 12" L. x 8" W. x 12" H.
TO LSTORAGE
Product
No.
Mfg.
No.
Description
394416-C
1137
12-pocket Traytote Bag
Order
Mult.
Weight
1/0/6
3.833
Unit
Cost
28-Pocket Electrical And Maintenance Tool Pouch - 7" x
Product
No.
Mfg.
No.
Description
394475-B
1526
28-pocket Tool Pouch
35.99 EA
Order
Mult.
Weight
1/0/8
2.750
Unit
Cost
32.99 EA
TO LSTORAGE
Custom Leathercraft
TO OLSTO RAGE
Custom Leathercraft
15-Pocket Traytote™ Bag - 13-1/2" x 9", multi-compartment plastic 30-Pouch Bucket Pocket - Built from super tough, light fabric for
tray included, stored into middle compartment for easy
access to the rest of bag contents. 8
pockets outside and 7 inside to organize
a wide range of tools and accessories.
Main pocket with web loops to
accommodate large handle tools. Extra
padded carrying handles and adjustable
shoulder strap. Metal tool snap and
electrical tape strap. 16" L. x 9" W. x 9" H.
Product
No.
Mfg.
No.
Description
320147-C
1529
16" 15-pocket Tool Bag
10-180
durability and long wear. 14 interior pockets and 16
exterior pockets keep tools secure and
organized. Fits any 5 gallon bucket. Color:
Black and tan.
Order
Mult.
Weight
1/0/6
2.667
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
32.99 EA
367818-D
1117
30-pouch Bucket Pocket
1/0/24
1.000
Unit
Cost
11.79 EA
We can become your single-source supplier
on many of the products you currently use!
HAND TOOLS
TOOL STORAGE
STORAGE UNI TS
Custom Leathercraft
Custom Leathercraft
48-Pouch Bucket Pocket - Built from super tough, light fabric for
Parachute Bucket Bag - Built from super tough, light fabric for
durability and long wear. 14 interior pockets and 34
exterior pockets keep tools secure and
organized. Fits any 5 gallon bucket.
Colors: Black and tan.
durability and long wear. 6 compartment with unique easy
lock/push button release drawstring
system. Heavy-duty reinforced web
carrying handle. Soft bottom design
prevents tipping or spilling. Can stack 2
or 3 bucket bags inside a standard 3-1/
2 or 5 gallon bucket. Color: Black and
tan.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
362433-C
1119
48-pouch Bucket Pocket
1/0/24
1.000
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
385778-C
1148
Parachute Bucket Bag
1/0/12
1.000
13.99 EA
Unit
Cost
11.49 EA
STORAGE UNI TS
Custom Leathercraft
TO L STORAG E
Custom Leathercraft
61-Pouch Bucket Pocket - Built from super tough, light fabric for
durability and long wear. 25 interior pockets and 36
exterior pockets keep tools secure and
organized. Fits any 3-1/2 to 5 gallon bucket.
Color: Yellow.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
327670-C
4122
61-pouch Bucket Pocket
1/0/24
1.200
Unit
Cost
Bucket Storage System - System includes five, 2" four
compartment stackable trays, 5 gallon bucket, and lid. Trays have
pull up handle for easy carrying and lifting.
Product
No.
Mfg.
No.
Description
371092-C
1180
Bucket Storage System
25.99 EA
Order
Mult.
Weight
1/0/2
6.750
Unit
Cost
27.99 EA
STORAGE UNI TS
Stack-On
TO L STORAG E
Custom Leathercraft
Bucket Seat™ - Plastic, air-cushioned seat that fits any 5 gallon
bucket. May be used on bucket alone or atop any
bucket-mounted tool carriers. Textured,
nonslip top. Includes hang hole.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
300551-C
1140
Bucket Seat
1/0/10
1.083
The product representations in this catalog are for reference only,
and are subject to change without notice.
Unit
Cost
5.79 EA
39-Drawer Storage Cabinet - Contains 30 medium drawers and 9
large drawers. Contemporary heavy-duty cabinet design with wide
frame for additional strength and rigidity.
Drawer stop tabs prevent spills. Horizontal and
vertical supports are made extra strong to
increase cabinet strength and improve drawer
action. Large, ribbed drawers. 14-7/8" W. x
18-1/2" H. x 6-3/8" D. (38cm x 46cm x 16cm).
Product
No.
Mfg.
No.
Description
334533-C
DS-39
39 Drawer Storage Cbnt
Order
Mult.
Weight
1/0/2
6.100
Unit
Cost
24.99 EA
10-181
HAND TOOLS
TO L STORAG E
HAND TOOLS
STORAGE UNITS
STORAGE UNI TS
STO RAGE UNI TS
Stack-On
Stack-On
12-Drawer Storage Cabinet - Contains 8 medium drawers and 4 Storage Bin - Rugged copolymer construction with wide front
large drawers. Contemporary heavy-duty cabinet design with wide
frame for additional strength and rigidity.
Drawer stop tabs prevent spills.
Horizontal and vertical supports are
made extra strong to increase cabinet
strength and improve drawer action.
Large, ribbed drawers. 10-9/32" W. x 9-5/
8" H. x 6-3/8" D. (26cm x 24cm x 16cm).
Product
No.
Mfg.
No.
Description
334506-C
DS-12
12 Drawer Storage Cbnt
Order
Mult.
Weight
1/0/4
2.950
openings, these bins allow for easy access and
greater visibility. For home, shop, or
garage storage.
Product
No.
Mfg.
No.
334418-D
BIN-5
334427-E
BIN-7
Unit
Cost
11.99 EA
STORAGE UNI TS
Stack-On
Description
Small, red, 4-1/8" W. x 5-5/
16" D. x 3-1/16" H. (10.5cm x
13.6cm x 7.8cm)
Small, yellow, 4-5/16" W. x
6-5/16" D. x 3" H. (11cm x
16cm x 7.5cm)
Medium, green, 6-5/16" W. x
9-1/2" D. x 5-1/8" H. (16cm x
24cm x 13cm)
Large, blue, 8-5/8" W. x
13-13/16" D. x 6-3/4" H.
(22cm x 35cm x 17cm)
Order
Mult.
Weight
Unit
Cost
1/0/48
.146
.99 EA
1/0/48
.208
1.99 EA
1/0/48
.500
3.99 EA
22-Drawer Storage Cabinet - Contains 14 medium drawers and 8 334436-D BIN-10
large drawers. Contemporary heavy-duty cabinet design with wide
frame for additional strength and
334445-D
BIN-14
1/0/24
10.833
6.99 EA
rigidity. Drawer stop tabs prevent spills.
Horizontal and vertical supports are
made extra strong to increase cabinet
Stack-On
strength and improve drawer action.
Red Storage Bin - Comes in a pack of 6. Has a wide variety of uses
Large, ribbed drawers. 19-3/8" W. x 9-5/
8" H. x 6-3/8" D. (49cm x 24cm x 16cm).
including home, shop, office, crafts, and hobbies.
Rugged copolymer construction with
wide front openings, these bins allow for
Product
Mfg.
Order
Unit
easy access and greater visibility. 4-1/8"
No.
No.
Description
Mult.
Weight
Cost
W. x 5-1/4" D. x 2-1/8" H. (10cm x 13cm
334515-C
DS-22
22 Drawer Storage Cbnt
1/0/3
5.133
17.99 EA
x 7cm).
STO RAGE UNI TS
STORAGE UNI TS
Stack-On
27-Drawer Storage Cabinet - Contains 23 medium drawers and 4 Product
Mfg.
Order
Unit
No.
No.
Description
Mult.
Weight
Cost
large drawers. Contemporary heavy-duty cabinet design with wide
frame for additional strength and rigidity.
334454-D
BIN-6
6 Pk Red Storage Bins
1/0/6
.135
6.99 EA
Drawer stop tabs prevent spills. Horizontal
and vertical supports are made extra
Stack-On
strong to increase cabinet strength and
Large Storage Dividers - 16 storage dividers included. Used for the
improve drawer action. Large, ribbed
individual who wants to add additional organization.
drawers. 12-5/8" W. x 13-3/8" H. x 6-3/8"
4.25" L. x 15/16" W. x 2.00" D.
D. (32cm x 34cm x 16cm).
STO RAGE UNI TS
Product
No.
Mfg.
No.
Description
334524-C
DS-27
27 Drawer Store Cabinet
10-182
Order
Mult.
Weight
1/0/2
4.600
Unit
Cost
17.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
334481-D
DIV-LG
16 Lg Storage Dividers
1/0/12
.300
Unit
Cost
5.99 EA
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
STORAGE UNITS
WORK STANDS
Stack-On
Steel City Corp
Small Storage Dividers - 48 dividers included. Used for the
Work Bench Legs - 1 set of legs. Assembles to 32-1/4" H. x 20-1/2"
individual who wants to add additional organization. 2.00" L. x
15/16" W. x 1.00" D.
D. Legs have place for double plug electrical
outlet. Holes are spaced for a variety of uses.
Angle braces at each connection.
Product
No.
Mfg.
No.
334490-D
DIV-SM
Description
Order
Mult.
Weight
48 Sm Storage Dividers
1/0/12
.250
Unit
Cost
5.99 EA
STORAG EUN ITS
Stack-On
Wall Mount Bin Rail - Allows for 3 model No. BIN-5’s to be hung
from the wall. Fastening hardware is not
included. 12-1/2" W. x 3/16" D. x 1-1/4"
H. (31.8cm x .5cm x 3.2cm).
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
334463-D
BIN RAIL-3
Wall Mount Bin Rail Bin5
1/0/24
.146
Product
No.
Mfg.
No.
Description
354832-D
WB-1R
Workbench Legs
Order
Mult.
Weight
0/0/1
13.000
Unit
Cost
32.49 PR
WORK STANDS
Do it Best® Sawhorse Bracket - Heavy-duty brackets, 2" x 4".
Converts 5-pieces of lumber into a sawhorse, without nails, bolts,
screws or mitre cutting of legs. Wingnut
locks pieces firmly in place. Safe, sturdy
and durable. Made of heavy- gauge
steel, fabricated for strength.
Rust-resistant finish. Convenient and
portable.
Unit
Cost
.99 EA Product
No.
Mfg.
No.
Description
324312
2x4 Sawhorse Bracket
Order
Mult.
Weight
1/0/6
4.000
Unit
Cost
WO RKSTAN DS
Lehigh Group/Crawford
324312-C
Tool Stand - Universal power tool stand. 19" x 10" steel work surface
has a unique 96 hole grid pattern designed
for mountintg most any type or brand of
bench top power tool. Includes a 24" x 14"
storage tray with built-in tool holders and
hardware pockets. Nonskid rubber feet to
reduce vibration.
Product
No.
Mfg.
No.
354287-A
PTS2
10.99 PR
WORK STANDS
Adjustable Steel Sawhorse - 14-gauge steel with high-quality
powder coating. Legs fold up inside for easy storage. (2" x 4" x
38" folded) 25" H. x 38" L. open. Width
adjustable, height from 25" to 40". Built
in handle for easy carrying. 2
sawhorses can support 2000 lb.
Description
Order
Mult.
Weight
Unit
Cost
Tool Stand
0/0/1
22.900
39.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Unit
Cost
361100-B
TS525
Adj Steel Sawhorse
1/5/10
18.600
39.99 EA
WO RKSTAN DS
Rousseau Company
Miter Saw Stand - Fits all miter saws. 35-1/2" work height. 16" x 13"
mounting surface. Compact and portable design.
Spring-loaded leg catch. 10" pneumatic
tires for rough terrain. 13" roller stands
and bases with 12" overall stock
support. Solid welded frame.
Powder-coated finish. Saw not
included.
Product
No.
Mfg.
No.
Description
371084-A
2950
Miter Saw Stand
Some products shown may need to be special ordered
for your convenience!
Order
Mult.
Weight
0/0/1
68.000
Unit
Cost
289.99 EA
10-183
HAND TOOLS
STORAG EUN ITS
HAND TOOLS
WORK STANDS
WOR KSTAND S
TO OLBELTS/ APRON S
Storehorse
Maasdam-Dead On/Hart
Heavy-Duty Folding Sawhorse - Fiberglass reinforced,
Black Work Suspenders - 2" webbing and elastic straps are
nonmetalic sawhorse is 50% stronger than the original Storehorse and is
rated to hold 1500 lb. per pair. Weighs
only 12 lb. and folds to just 2" in width.
Sure-grip rubber feet give added stability
on smooth or wet surfaces. Improved top
protector has 30"/76mm measuring guide
that is grooved to hold small diameter
material when cutting. Also features a
parts tray at top and handy bottom tool
shelf. Partially made from post industrial
recycled material. Height: 30".
custom molded with Dead-On heavy-duty logo clip. Suspenders clip
to tool belt or pants.
Product
No.
Mfg.
No.
Description
332866-B
DO-600
Black Work Suspenders
Order
Mult.
Weight
1/0/6
.550
Unit
Cost
10.99 EA
TO OLBELTS/ APRON S
Maasdam-Dead On/Hart
Product
No.
Mfg.
No.
369209-B
10006-6
Description
Order
Mult.
Weight
Unit
Cost
30" Folding Sawhorse
1/6/48
12.833
39.99 EA
Nail and Tool Bag - Ballistic nylon fabric for maximum life. Single
pouch for nails, tools, and small parts. Is compatible with
Dead On ballistic Framer’s Rig system.
TO LBETLS /APRO NS
Storehorse
Heavy-Duty Folding Sawhorse - 36" high. Fiberglass frame with
aluminum reinforced legs. 2 horses can support 1000 lb.
Lightweight, weighs 13 lb. Folds up to 2"
width for easy storage. Transportable with
easy carry handle. Can be used with
accessories.
Product
No.
Mfg.
No.
Description
332875-B
DO-BBAG
Nail And Tool Bag
Order
Mult.
Weight
1/0/6
.550
Unit
Cost
9.99 EA
TO OLBELTS/ APRON S
Maasdam-Dead On/Hart
21-Pocket Tool Pouch - This large capacity carpenter’s pouch
comes with a large boxed front nail pouch and multiple small
pockets for nail sets, pencils, and small tools.
There is an extra deep main pocket to carry
heavy loads. Molded hammer sleeve protects
legs. Ballistic nylon fabric for maximum life.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Unit
Cost
375934-B
10015-6
36" Folding Sawhorse
1/6/48
12.833
39.99 EA
TO LBETLS /APRO NS
Steel Sawhorse - 14-gauge steel with high-quality powder coating.
Legs fold up inside for easy storage. (2" x 4" x
38" folded) 25" H. x 38" L. open. Built in
handle for easy carrying. 2 saw horses
can support 2000 lb.
Product
No.
Mfg.
No.
Description
332651-B
DO-NB13
21 Pocket Tool Pouch
Order
Mult.
Weight
1/0/6
.550
Unit
Cost
24.99 EA
TO OLBELTS/ APRON S
Maasdam-Dead On/Hart
31-Pocket Framer Apron - This Framer’s Rig comes with an
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Unit
Cost
378704-B
TS125
Steel Sawhorse
1/5/10
18.600
29.99 EA
10-184
integrated belt and back support system complete with 31 pockets
for nail and tool storage. Has 3 boxed
front nail pouches and a rafter square
pocket. Ballistic nylon fabric for
maximum life and moisture-wicking
mesh liner.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
332893-B
DO-FRL
31 Pocket Framer Apron
1/0/12
.550
Unit
Cost
59.99 EA
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
TOOL BELTS/APRONS
TO L BELTSA/ PR ONS
TO OLBE LTS/ APRO NS
Custom Leathercraft
Custom Leathercraft
12-Pocket Waist Apron - 10 oz., 100% cotton duck waist apron. 12 12-Pocket Carpenter’s Apron - Constructed of Dupont™ Cordura
Plus®. Best seller style. Includes: 6 main pockets for nails
and tools, 6 smaller pockets for pencils,
tools, combination square, etc. Steel
swinging hammer holder and leather
tape measure holder. 2" wide poly web
belt with quick-release polyvinyl buckle
that adjusts to waist sizes from 29" to
46". Color: Blue.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
332658-D
6427
Carpenter Apron
1/0/25
1.560
Unit
Cost
47.99 EA
TO OLBE LTS/ APRO NS
Product
No.
Mfg.
No.
367826-C
214
Description
Order
Mult.
Weight
12-pocket Waist Apron
1/10/40
1.000
Unit
Cost
12.99 EA
TO L BELTSA/ PR ONS
Custom Leathercraft
Canvas Nail Apron - 10 oz. 100% cotton fabric. 5 pockets: 2 large
front pockets, 1 small center pocket, 2 side tool
pockets. Double-stitched and rivet
reinforced at major stress points. 2
polypropylene hammer loops.
Packaged in poly bag.
Product
No.
Mfg.
No.
305987-D
C-12
Description
Order
Mult.
Weight
5-pocket Nail Apron
1/0/50
.283
Unit
Cost
4.29 EA
TO L BELTSA/ PR ONS
Custom Leathercraft
Canvas Bib Apron - Strong 8 oz. 100% natural cotton canvas. 12
pockets, double-tier; 10 waist pockets, plus 2 bib
pockets. 2 rivet reinforced poly web hammer
loops. Overall size: 23-1/2" x 9-1/2".
Product
No.
Mfg.
No.
300268-D
C-10
Description
Order
Mult.
Weight
12-pocket Bib Apron
1/0/50
.517
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
Custom Leathercraft
6-Pocket Single Side Apron - Constructed of Dupont™ Cordura
Plus®. 2 large nail and tool pockets, 4 smaller pockets for
pencils and small tools. Steel hammer
loop and metal measuring tape clip. 2"
wide poly web belt with quick-release
polyvinyl buckle adjusts to fit waist sizes
up to 46". Color: Blue.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
366382-C
6245
Single Side Apron
1/0/25
.760
Unit
Cost
21.99 EA
TO OLBE LTS/ APRO NS
Custom Leathercraft
10-Pocket Nail And Tool Bag - Constructed of Dupont™ Cordura
Plus®. Multipocket design. 3 reversed, flared pockets for
deep, easy access. 7 smaller pockets for
tools, pencils, etc. Leather hammer loop
and tape holder. Color: Blue.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
340537-D
6784
10-pocket Nail/tool Bag
1/0/25
.840
Unit
Cost
34.49 EA
Unit
Cost
8.29 EA
10-185
HAND TOOLS
waist pockets double stitched and tacked at stress
points. 2 leather hammer loops. Quick
release buckle. Color: Green and tan.
HAND TOOLS
TOOL BELTS/APRONS
TO LBETLS /APRO NS
TO OLBELTS/ APRON S
Custom Leathercraft
Custom Leathercraft
11-Pocket Nail And Tool Bag - Sierra 11-pocket tool pouch. 4
Drill Holder - Black Cordura Plus® nylon holster holds most 1/4" and 1/
main pockets for nails and tools. 6 small tool pockets for pliers,
pencils, nail sets, etc. Heavy-duty polyester fabric
and ballistic nylon binding. Extra large capacity
can be worn on right or left side.
2" drills. Pocket for drill accessories.
Safety strap with velcro fasteners.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
394491-B
1620
11-pocket Nail/tool Bag
1/0/25
1.680
Unit
Cost
21.49 EA
TO LBETLS /APRO NS
Custom Leathercraft
20-Pocket Electrician’s Tool Pouch - Double layers of super
tough, lightweight DuPont Cordura® Plus fabric. Exclusive patented
handle design and adjustable, padded
shoulder strap included for easy storage and
carry. Includes steel hammer loop, tape chain,
and tool snap.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
375268-D
5020
Cordless Drill Holster
1/0/25
1.760
Unit
Cost
17.99 EA
TO OLBELTS/ APRON S
Custom Leathercraft
5" Padded Tool Belt - Fits all CLC bags and pouches. 5" wide
tapered padded back panel for support and comfort. Hook and
loop fastening system. Quick release
nylon buckle. Double layer of rugged,
lightweight nylon. Universal size fits 29"
to 49" waist.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
375284-C
5625
Padded Work Belt
1/0/25
.680
Unit
Cost
31.49 EA
TO OLBELTS/ APRON S
Custom Leathercraft
12-Pocket Leather Apron - Oiled leather construction workers
apron. Includes 4 main reversed nail and tool pockets. 6 smaller
pockets for tools and pencils. 2" leather
belt. Fits waist sizes 29" to 46".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
323543-C
5508
20-pocket Tool Pouch
1/0/12
1.917
Unit
Cost
42.99 EA
TO LBETLS /APRO NS
Custom Leathercraft
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
375128-C
19427
12-pocket Leather Apron
1/0/20
2.250
Padded Belt - 3" wide padded comfort belt. Heavy-duty double layer
lightweight fabric will not rot, crack,
harden, or mildew. Designed for use
with tool and nail pouches. 2" double
tongue metal roller buckle. Grip-strip
fastening system holds pouches securely in place. Fits waist sizes 29" to
46".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
332682-C
5623
29-46 Padded Belt
1/0/25
.480
10-186
Unit
Cost
79.99 EA
TO OLBELTS/ APRON S
Custom Leathercraft
Tape Rule Holder - Top grain leather. Die-formed front retains its
shape. Riveted for strength. 2-3/4" long belt
slots. For 16’ to 30’ tapes.
Unit
Cost
15.99 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355314-C
464
Tape Rule Pocket
1/0/50
.250
Unit
Cost
5.99 EA
Your representative can give you details
on product availability and shipping requirements!
HAND TOOLS
TOOL BELTS/APRONS
TO L BELTSA/ PR ONS
TO OLBE LTS/ APRO NS
Custom Leathercraft
Custom Leathercraft
Tool Holder - Top grain leather. Die molded front retains its shape.
8-Pocket Leather Apron - Professional’s choice. Heavy-duty suede
Riveted for strength. For pliers, side cutters, pruners,
grass shears, and other elongated tools. 2-3/4" long
belt slots.
leather. Main pockets, 3 small tool pockets, steel hammer
loop on right side. Leather tape holder.
2" wide poly web belt with quick release
polyvinyl buckle set. Belt fits waist sizes
29" to 46". Double stitched and rivet
reinforced. Import.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
332399-C
I370X-3
Carpenter Apron
1/0/25
1.250
Unit
Cost
19.99 EA
Custom Leathercraft
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355298-D
417
Leather Tool Holder
1/0/50
.250
Unit
Cost
Leather Nail Bag - Heavy-duty suede leather. Large flared 10" x 11"
pocket. Nylon stitched and rivet reinforced.
5.49 EA
TO L BELTSA/ PR ONS
Maasdam-Dead On/Hart
Hammer Holder - Ballistic nylon fabric for maximum life. Is compatible
with Dead On ballistic Framer’s Rig system. Angled steel loop
holds hammer securely and washer backed rivets to prevent
loop pull-through.
Product
No.
Mfg.
No.
Description
332848-B
DO-500
Hammer Holder
Order
Mult.
Weight
1/0/6
.550
Unit
Cost
10.99 EA
TO L BELTSA/ PR ONS
Custom Leathercraft
Hammer Holder - Top grain leather. Cradle design steel loop keeps
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
323082-D
444X
Leather Nail Bag
1/0/25
1.000
Unit
Cost
13.99 EA
TO OLBE LTS/ APRO NS
Custom Leathercraft
Heavy-duty Web Work Belt - 2-1/4". Made from heavy cotton
webbing. Heavy-duty plated hardware. Fits waist sizes 29" to 46".
hammer from pivoting. Rivet reinforced. 2-3/4" long
belt slots.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
331322-D
C501
29-46 Web Work Belt
1/0/50
.500
Unit
Cost
7.29 EA
TO OLBE LTS/ APRO NS
Custom Leathercraft
Cell Phone Holder - Holds most brands of compact cell phones.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
350916-D
439
Leather Hammer Holder
1/0/50
.250
Unit
Cost
Versatile 3-way attachment for belts, web suspenders,
pants, etc. Heavy-duty clip on back and padded inside to
protect cell phones.
3.29 EA
TO L BELTSA/ PR ONS
Custom Leathercraft
Leather Work Belt - 1-3/4". Top grain leather. Single-tongue plated
buckle. Cuts off to fit waist sizes 29" to 46".
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
331171-D
E450-1
29-46 Leather Work Belt
1/0/50
.250
Service is our priority!
Our commitment is to meet your needs!
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
14.99 EA
391646-C
5127
Large Cell Phone Holder
1/0/24
.292
Unit
Cost
9.99 EA
10-187
HAND TOOLS
TO OLBE LTS/ APRO NS
HAND TOOLS
TOOL BELTS/APRONS
TO LBETLS /APRO NS
KN E PADS
Custom Leathercraft
K P Industries
6-Pocket Tool Pouch - Heavy-duty top grain leather. Deep main
Ultra Flex Knee Pads - The Knee-Pro pads are elongated for
pocket. 2 front molded pockets, 2 tapered screwdriver
holders. Leather tape pocket holds up
to 30’ tapes. Electric tape chain and tool
snap. Nylon stitched and rivet
reinforced. 2-3/4" long belt slots.
additional shin protection. Faster and easier latching system.
Made with a larger comfort pad and made with
metal rivets, which replace the plastic.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
323091-C
W438
6-pocket Tool Pouch
1/0/20
.500
TO LBETLS /APRO NS
Custom Leathercraft
Unit
Cost
Product
18.99 EA No.
336309-C
Mfg.
No.
Description
KPUF01
Ultra Flex Ii Knee Pads
Order
Mult.
Weight
1/0/6
1.000
Unit
Cost
22.99 EA
KN E PADS
8-Pocket Electrician’s Tool Pouch - Large partitioned center
pocket with 7 additional front and side pockets. Leather pocket holds up
to 30’ tapes. Electric tape chain and tool snap. 2-3/4"
wide belt loop. Chrome tanned leather.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
330788-C
K500
8-pocket Tool Pouch
1/0/20
1.000
Custom Leathercraft
Knee Pad - Medium-duty. Adjustable double web straps for good fit.
Natural foam rubber for comfort. Flat
bottom for good grip.
Unit
Cost
34.99 EA
TO LBETLS /APRO NS
Klein Tools
Electricians Tool Belt - Belt width 1-1/2". Fits 32" to 40" waist.
Leather, with tool loops and chain tape thong. Tan.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
323019-D
319
Heavy Duty Knee Pad
1/0/30
1.250
Unit
Cost
10.49 PR
KN E PADS
Custom Leathercraft
Easy-Swivel Knee Pads - Ideal for floor covering trade.
Comfortable, 1/2" thick neoprene foam rubber interior. Plastic cap
on front for easy knee swivel. Elastic
straps with snaps for good fit.
Product
No.
Mfg.
No.
Description
311138-B
5207-M
Electricians Belt
Order
Mult.
Weight
1/0/6
.470
Unit
Cost
22.99 EA Product
No.
375322-C
10-188
Mfg.
No.
Description
Order
Mult.
Weight
V6355
Plastic Knee Pad
1/0/25
.840
Unit
Cost
27.99 PR
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
KNEE PADS
DRIL AC ES O RIES
Custom Leathercraft
Custom Leathercraft
Nonskid Knee Pads - Ideal for floor and roofing trade. Thick foam
Comfort system Gel Knee Pads - Special CLCComfort Target
gel center provides maximum cushioning and all day wearability.
Crafted from super tough 160D ballistic
nylon. Larger caps are over sized for
more protective coverage. Breathable
neoprene lower straps secure below the
knee. GrabTab for easy positioning of
kneepad. Used by masons, tile
contractors, and professionals of all
trades.
inner pads provide good knee comfort and protection.
Textured outer shell is lightweight,
waterproof, and easy to clean.
Replaceable, high-density rubber straps
and replacement buttons, adjust to
provide a snug fit.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
375357-D
361
Knee Pad
1/0/20
1.600
Unit
Cost
24.99 PR Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
G340
Gel Kneepads
1/0/15
1.867
Unit
Cost
KNE PADS
Custom Leathercraft
364274-C
Ultra-Light Knee Pad - Thick molded foam for comfort and
protection. Adjustable elastic straps. 1 size fits all. Hook and
loop fasteners.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
394505-C
V235
Ultra Light Kneepads
1/0/25
.240
37.99 PR
DRIL AC ES O RIES
Custom Leathercraft
Comfort System Flex Gel Knee Pads - Special CLC Comfort
Target gel center provides maximum cushioning and all day wearability.
Durable soft-flex rubber straps that
adjust to fit all sizes. Super-accordion,
Ultra Flex construction for comfort and
protection. Super thick high density,
closed cell foam. Used by plumbers, tile
contractors, and professionals of all
trades.
Unit
Cost
4.99 EA
KNE PADS
Custom Leathercraft
Comfort System Pro Knee Pads - Super thick 1/2" high density,
closed cell foam. Larger caps are over sized for more protective
coverage. Neoprene lower straps secure
below the knee for comfort all day long.
GrabTab for easy positioning of kneepad.
Used by masons, roofers, and professionals
of all trades.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
364282-C
G361
Gel Flex Kneepads
1/0/15
1.733
Unit
Cost
24.99 PR
DRIL AC ES O RIES
1/4" Hex Shank Screw Pilot - Drills, countersinks and
counterbores in 1 operation. Fits all cordless screwdrivers and drills.
Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
364266-C
345
Pro Comfort Kneepads
1/0/15
1.733
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
Unit
Cost
25.99 PR
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
332755-E
332763-E
332771-E
332798-E
16506
16508
16510
16512
For wood screw size 6
For wood screw size 8
For wood screw size 10
For wood screw size 12
1/6/48
1/6/48
1/6/48
1/6/48
.050
.050
.062
.062
Unit
Cost
5.49 EA
5.49 EA
5.49 EA
5.49 EA
10-189
HAND TOOLS
KNE PADS
HAND TOOLS
*EAZYPOWER
*EAZY-
10-190
PO WER
Save time by letting us locate those
hard-to-find items for you!
HAND TOOLS
*EAZYPOWER
POWER
HAND TOOLS
*EAZ Y-
We can become your single-source supplier
on many of the products you currently use!
10-191
HAND TOOLS
*EAZYPOWER
*EAZY-
10-192
PO WER
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
*EAZYPOWER
POWER
HAND TOOLS
*EAZ Y-
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
10-193
HAND TOOLS
*EAZYPOWER
*EAZY-
10-194
PO WER
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
*EAZYPOWER
POWER
HAND TOOLS
*EAZ Y-
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
10-195
HAND TOOLS
*EAZYPOWER
*EAZY-
10-196
PO WER
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
*EAZYPOWER
POWER
HAND TOOLS
*EAZ Y-
Your representative can give you details
on product availability and shipping requirements!
10-197
HAND TOOLS
*EAZYPOWER
*EAZY-
10-198
PO WER
Service is our priority!
Our commitment is to meet your needs!
HAND TOOLS
*EAZYPOWER
POWER
HAND TOOLS
*EAZ Y-
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
10-199
HAND TOOLS
*EAZYPOWER
*EAZY-
10-200
PO WER
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
HAND TOOLS
*EAZYPOWER
POWER
HAND TOOLS
*EAZ Y-
Save time by letting us locate those
hard-to-find items for you!
10-201
HAND TOOLS
*EAZYPOWER
*EAZY-
10-202
PO WER
We can become your single-source supplier
on many of the products you currently use!
HAND TOOLS
*EAZYPOWER
POWER
HAND TOOLS
*EAZ Y-
The product representations in this catalog are for reference only,
and are subject to change without notice.
10-203
HAND TOOLS
*EAZYPOWER
*EAZY-
10-204
PO WER
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
HAND TOOLS
DRILL ACCESSORIES
DRI L AC ES SORI ES
DRIL AC ES O RIES
Product
No.
Mfg.
No.
332801-D
16515
Description
Order
Mult.
Weight
4pc Screw Pilot
1/5/100
.138
Unit
Cost
21.49 EA
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
310727-D
16621
Nail Spinner
1/0/5
.150
Unit
Cost
9.29 EA
DRIL AC ES O RIES
DRI L AC ES SORI ES
Tool Steel Countersinks - Countersink, deburr, and chamfer holes
1" IceBit™ Insert Bit - Iso-Temp® toughened, industrial insert bits.
1/4" hex shank.
in soft metal and wood. 1/4" shank. 1 per card.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
335290-D
335304-D
354945-D
16642
16643
16644
3/8"
1/2"
5/8"
1/5/100
1/5/100
1/5/100
.038
.076
.062
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
391824-E
391832-E
391840-D
391859-D
391867-D
16422
16423
16424
16425
16426
No. 2 Phillips, 2 per card
No. 3 Phillips, 2 per card
6-8 slotted, 2 per card
8-10 slotted, 2 per card
10-12 slotted, 2 per card
1/5/100
1/5/100
1/5/100
1/5/100
1/5/100
.001
.001
.002
.002
.002
Unit
Cost
3.29 EA
3.49 EA
3.79 EA
Unit
Cost
1.79 EA
1.79 EA
1.99 EA
1.99 EA
1.99 EA
DRIL AC ES O RIES
DRI L AC ES SORI ES
1" IceBit™ Insert Bit - Iso-Temp® toughened, industrial insert bits.
1/4" hex shank.
High-Speed Steel Countersink - For use on any machinable
material. 1/4" shanks, 5 flutes and 82° included angle. 1 per card.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325880-D
325899-D
325902-D
16634
16636
16638
1/2"
5/8"
3/4"
1/3/60
1/0/3
1/0/3
.083
.103
.127
Some products shown may need to be special ordered
for your convenience!
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
391816-E
350443-E
350435-E
350168-E
16421
16387
16388
16389
No. 1 Phillips, 2 per card
No. 1 Pozidriv®
No. 2 Pozidriv®
No. 3 Pozidriv®
1/5/100
1/5/100
1/5/100
1/5/100
.001
.038
.038
.038
Unit
Cost
1.79 EA
1.49 EA
1.49 EA
1.49 EA
Unit
Cost
12.49 EA
13.79 EA
15.49 EA
10-205
HAND TOOLS
1/4" Hex Shank Screw Pilot Set - Includes 4 screw pilots for No. Nail Spinner - Spins 4, 6, 8, or 10 penny finishing nails into hardwood.
6, 8, 10, and 12 wood screws. Fits all cordless screwdrivers and
Eliminates wood trim splitting. Spins nail less than 1" from the
drills. Carded.
surface for finishing with hammer. 1/4" shank.
HAND TOOLS
DRILL ACCESSORIES
DRLI AC ES O RIE S
I NSERT BTI S
2" IceBit™ Power Screwdriving Bit - Iso-Temp® toughening
Screw Boss™ Bit Finder and Driver - Holds the screw in the
provides fracture-resistant tips. 1/4" hex shank.
correct starting position without wobbling or disengaging from the insert
bit. Accepts No. 10 and smaller screws. Uses all types of 1"
insert bits with a 1/4" hex shank. Permanent magnet holds
screw to insert bit. Includes No. 2 Phillips insert bit. 5-1/4" L.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
329452-D
359599-D
329487-E
359602-E
329495-D
329509-D
359610-D
329517-D
359629-D
329525-D
390283-E
390291-D
390305-D
16431
15880
16432
15881
16433
16441
15882
16442
15883
16443
16310
16311
16312
No. 1 Phillips, carded
No. 1 Phillips, bulk
No. 2 Phillips, carded
No. 2 Phillips, bulk
No. 3 Phillips, carded
6-8 slotted, carded
6-8 slotted, bulk
8-10 slotted, carded
8-10 slotted, bulk
10-12 slotted, carded
No. 1 square recess, carded
No. 2 square recess, carded
No. 3 square recess, carded
1/5/100
0/0/10
1/5/100
0/0/25
1/5/100
1/5/100
0/0/10
1/5/100
0/0/10
1/5/100
1/5/100
1/5/100
1/5/100
.050
.005
.050
.004
.050
.050
.004
.050
.004
.050
.001
.001
.002
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
2.29 CD
1.79 EA
2.29 CD
1.29 EA
2.29 CD
2.99 CD
2.29 EA
2.99 CD
2.29 EA
2.99 CD
2.29 EA
2.49 EA
2.49 EA
353620-D
359769-D
16061
16051
Carded
Bulk
1/10/60
0/0/5
.127
.012
DRLI AC ES O RIE S
Unit
Cost
8.79 CD
7.79 EA
I NSERT BTI S
Screw Boss™ Finder and Driver With Bits - Holds the screw
in the correct starting position without wobbling or disengaging from the
insert bit. Accepts No. 10 and smaller screws. Uses all
types of 1" insert bits with a 1/4" hex shank. Permanent
magnet holds screw to insert bit. 5-1/4" L. Includes No. 1
and 2 Phillips, and 8-10 slotted insert bits. Carded. Order
12 and receive a preloaded clip strip.
1-7/8" Double End IceBit™ Power Screwdriving Bit Bulk.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
347795-C
16062CS
Finder&driver W/bits
1/0/12
.056
Unit
Cost
9.49 EA
I NSERT BTI S
Product
No.
Mfg.
No.
359653-D
359661-D
390313-D
15886
15887
16473
10-206
Description
No. 1 Phillips/6-8 slotted
No. 2 Phillips/8-10 slotted
No. 1 and 2 square recess,
carded
Order
Mult.
Weight
0/0/10
0/0/10
1/5/100
.004
.004
.001
Unit
Cost
2.49 EA
2.49 EA
2.49 EA
Screw boss™ Compact Bit Finder and Driver - Holds the
screw in the correct position without wobbling or disengaging from the
insert bit. Compact design for hard to reach
places. 1/4" hex shank, Phillips and slotted
ACR® bits. Magnetic. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
329193-D
16035
Compact Screw Boss
1/0/10
.050
Unit
Cost
9.79 EA
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
HAND TOOLS
I NSERT BI TS
Power Screwdriver Bit - 1/4" hex shank. Special shock-resistant
1" Torx Insert Bit - Special shock-resistant alloy steel, fully hardened
alloy steel, fully hardened and tempered providing necessary
toughness for power driving of sheet metal and
case-hardened screws. Without finder. Model No. 15070 thru
15078 have a 1-5/16" bit length and model No. 15090 has a 6"
bit length. Carded.
and tempered. For hand and power driving. 1/4"
hex shank.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
329797-D
329800-D
329819-D
329827-D
329835-D
329762-D
329770-D
329789-D
329746-D
15070
15071
15072
15073
15074
15076
15077
15078
15090
5-6 slotted
6-8 slotted
8-10 slotted
10-12 slotted
12-14 slotted
No. 1 square recess
No. 2 square recess
No. 3 square recess
5/32" clutch
1/5/100
1/5/100
1/5/100
1/5/100
1/5/100
1/0/5
1/5/100
1/0/5
1/0/5
.050
.050
.050
.050
.050
.050
.050
.050
.050
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
366218-D
366374-D
366390-D
365793-D
359564-D
365890-D
359572-D
365939-D
366404-D
365971-D
366552-D
15401
15402
15403
15404
15877
15405
15878
15406
15407
15408
15409
T x 8, 2 per card
T x 9, 2 per card
T x 10, 2 per card
T x 15, 2 per card
T x 15, 10 per bag
T x 20, 2 per card
T x 20, 10 per bag
T x 25, 2 per card
T x 27, 2 per card
T x 30, 2 per card
T x 40, 2 per card
1/5/100
1/5/100
1/5/100
1/5/100
0/0/10
1/5/100
0/0/10
1/5/100
1/5/100
1/5/100
1/5/100
.003
.003
.003
.003
.004
.003
.004
.003
.003
.003
.003
Unit
Cost
2.29 CD
2.29 CD
2.29 CD
2.29 CD
2.29 CD
1.79 CD
1.79 CD
1.79 CD
3.29 CD
Unit
Cost
4.49 CD
4.49 CD
4.49 CD
4.49 CD
2.29 EA
4.49 CD
2.29 EA
4.49 CD
4.49 CD
4.49 CD
4.49 CD
I NSERT BI TS
INS ERTBI TS
Torx Drive Bit - 3/8" square drive sockets. Carded.
1" Insert Bit - 1/4" hex shank. Special shock resistant alloy steel, fully
hardened and tempered. Tough enough for power driving of
sheet metal and case hardened screws. Some sizes available
in bulk bags (as noted).
Product
No.
Mfg.
No.
363359-E
359467-D
15305
15868
363367-E
359475-D
15306
15869
391204-E
359483-D
15307
15870
391190-D
364126-D
359491-D
365203-D
359505-D
15320
15321
15871
15322
15872
365629-D
359513-D
15323
15873
365637-D
15338
359548-D
15875
365645-D
15339
359556-D
15876
365653-D
15340
365998-E
359521-D
15342
15874
366021-E
15343
Description
No. 1 Phillips, 2 per card
No. 1 Phillips, 10 per bag,
bulk
No. 2 Phillips, 2 per card
No. 2 Phillips, 10 per bag,
bulk
No. 3 Phillips, 2 per card
No. 3 Phillips, 10 per bag,
bulk
3-4 slotted, 2 per card
6-8 slotted, 2 per card
6-8 slotted, 10 per bag, bulk
8-10 slotted, 2 per card
8-10 slotted, 10 per bag,
bulk
10-12 slotted, 2 per card
10-12 slotted, 10 per bag,
bulk
No. 1 square recess, 2 per
card
No. 1 square recess, 10 per
bag, bulk
No. 2 square recess, 2 per
card
No. 2 square recess, 10 per
bag, bulk
No. 3 square recess, 2 per
card
5/32" clutch, 2 per card
5/32" clutch, 10 per bag,
bulk
3/16" clutch. 2 per card
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
Order
Mult.
Weight
Unit
Cost
1/5/100
0/0/10
.003
.004
1.79 CD
.79 EA
1/5/100
0/0/25
.003
.002
1.79 CD
.79 EA
1/5/100
0/0/10
.003
.004
1.79 CD
.79 EA
1/5/100
1/5/100
0/0/10
1/5/100
0/0/10
.003
.003
.004
.003
.004
1.79 CD
1.79 CD
.89 EA
1.79 CD
.89 EA
1/5/100
0/0/10
.003
.004
1.79 CD
.89 EA
1/5/100
.003
1.99 CD
0/0/10
.004
1/5/100
.003
Product
No.
Mfg.
No.
Description
333188-D
333482-D
15745
15750
TX45
TX50
0/0/10
.004
.89 EA
1/5/100
.003
1.99 CD
1/5/100
0/0/10
.003
.004
2.29 CD
1.99 EA
1/5/100
.003
2.29 CD
Weight
1/0/5
1/0/5
.200
.200
Unit
Cost
5.99 CD
5.99 CD
I NSERT BI TS
Magnetic Nutsetter - For use on hex head screws and nuts. Fits all
electric drills and most power screwdrivers. Sockets and
shanks made of a single piece of tool steel.
Product
.89 EA No.
1.99 CD
Order
Mult.
306966-D
359688-D
307377-D
359696-D
307386-D
Mfg.
No.
Description
Order
Mult.
Weight
15111
15888
15112
15889
15113
1/4", carded, 1-5/8" long
1/4", bulk, 1-5/8" long
5/16", carded, 1-5/8" long
5/16", bulk, 1-5/8" long
3/8", carded, 1-3/4" long
1/5/100
0/0/5
1/5/100
0/0/5
1/5/100
.050
.190
.062
.190
.076
Unit
Cost
5.29 CD
4.29 EA
5.79 CD
4.79 EA
6.29 CD
10-207
HAND TOOLS
INSERT BITS
INS ERTBI TS
HAND TOOLS
SOCKET ADAPTERS
Socket Adapters
SC REWBTI S
Power Nutsetter Set - Nonmagnetic feature eliminates metal
Angle Drive - For right angle drilling in tight areas and for buffing and
sanding. Halves or doubles drill speed.
Hardened steel gears for long life.
Handle fits either side. Adapter allows
chucking to 3/8-24 drill spindle to
free-chuck for drilling.
shaving build up. Spring nib firmly holds screw in place.
Iso-Temp® toughening provides additional strength and
durability. Set contains one 1/4", 5/16", and 3/8" hex opening
bits with a plastic holder. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
327565-C
16081
3pc Nutsetter Set
1/5/20
.310
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
321451-D
17172
Angle Drive
1/0/20
1.420
19.49 SET
Unit
Cost
35.99 EA
SC REWBTI S
SOCKET REMOVER/ ADAPTER
8-Piece Power Socket Set - For variable speed drills and power
screwdrivers. Includes seven 6-point sockets. Sizes: 3/16",
1/4", 9/32", 5/16", 11/32", 3/8", and 7/
16". Also includes 1/4" drive socket
adapter. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
324811-D
15524
8pc Power Socket
1/3/60
.187
Unit
Cost
Socket Adapter - 2" long. Securely holds 1/4" square drive sockets
for easy driving of nuts and hex head screws.
1/4" hex shank fits all variable speed
drills. Carded. Order a full case of 12
and receive a preloaded clip strip.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
303984-D
15471CS
2" Socket Adapter
1/0/12
.050
Unit
Cost
3.29 CD
SC REWBTI S
7.29 SET
SCREWBI TS
Socket Adapter - 2" long. Securely holds 3/8" square drive sockets
Drywall Screw Setter - Automatically countersinks screws to the
for easy driving of nuts and hex head screws. 1/4" shank fits all
variable speed drills. Carded.
proper depth in drywall, particle board, and plywood. 1/4"
hex shank. Carded. Order 12 and
receive a preloaded clip strip.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
390380-D
16622CS
Drywall Starter Bit
1/0/12
.002
10-208
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
326062-D
15475CS
3/8" Sq Dr Adapter
1/0/12
.068
Unit
Cost
3.99 EA
Unit
Cost
2.49 EA
Your representative can give you details
on product availability and shipping requirements!
HAND TOOLS
SCREW BITS
SCREWBI TS
SCREWBI TS
Grabit™ 2-Piece Screw Extractor Set - Serrated edges for
immediate gripping action, 18 to 30 teeth grip the rusted nut, damaged
bolt, or stud as you turn; tapered teeth provide
overlapping gripping range. Strong, compact
pass-through design fits in spaces with as little
as 3/4" clearance and works with any type of
socket or wrench. Case hardened alloy steel,
black oxide finish. Limited lifetime replacement
warranty. Carded.
aggressive performance. For use with most screw types such as hex,
Phillips, slotted, pozi-driv, torx, and
square drive. Also works in wood screws,
sheet metal screws, and mechanical
screws from No. 6 to No. 14. Can be used
in a variable speed drill with regular or
quick-change chuck systems. 1 end of bit
used for burnishing screw, other end of bit
used for extraction. High-quality steel for
longer life and reusable bit. Set includes 1
each of No. 2 bit and No. 3 bit.
Product
No.
Mfg.
No.
Product
No.
Mfg.
No.
Description
368911-B
XSB100E
383732-C
8525P
2pc Extractor Set
369039-B
XSB200E
300463-C
XSB300E
Description
Grip range: 1/4" to 15/32",
5-piece set
Grip range: 7/16" to 21/32",
5-piece set
Grip range: 1/4" to 21/32",
10-piece set
Order
Mult.
Weight
Unit
Cost
1/0/5
.800
24.99 EA
1/0/5
.800
24.99 EA
1/0/5
1.250
49.99 EA
Order
Mult.
Weight
1/0/6
.239
Unit
Cost
15.99 EA
SCREWBI TS
Screw Extractor Set - 6-piece set. Contains spiral flute scew
SCREWBI TS
extractor No. 1, 2, 3, 4, 5, and 6 in vinyl pouch.
Bolt Grip Set - 5-piece bolt grip set. Removes rounded off, painted
over, damaged and rusted over nuts, and bolts.
Set includes 3/8", 7/16"/11mm, 1/2", 9/
16"/14mm, and 5/8"/16mm. Can be
used on a 3/8" ratchet, impact wrench,
or air ratchet. Base of socket is hex to
allow use of flat wrenches, box
wrenches, adjustable wrenches, or
locking pliers. Fits both metric and
standard sized nuts and bolts. 6T of
high-carbon steel grip tight to remove
the nut or bolt. Storage case.
Product
No.
Mfg.
No.
Description
347701-B
394001
5pc Bolt Extractor
Order
Mult.
Weight
Description
323395-C
394100
Bolt And Screw Extractor
Service is our priority!
Our commitment is to meet your needs!
Description
Order
Mult.
Weight
21825
6pc Screw Extractor Set
1/0/25
.020
Unit
Cost
17.79 EA
1/0/5
3.290
Unit
Cost
Screw Extractor - Spiral flute. For removing broken screws, pipes,
29.99 EA
bolts and studs. Made of strong tool steel,
heat-treated with rust resistant chrome
finish. Drill size is permanently marked
on shank of extractor.
7-piece Power-Grip™ Screw and Bolt Extractor Set 7-piece power bolt grip set. Grips both metric and SAE - Universal Lobular
Design fits both sizes. Black oxide finish
with white markings - prevents rust and
easy-to-read markings. Maximum gripping
power - reverse spiral flutes are designed
to bite down. Removes rounded off,
painted over, damaged, and rusted over
nuts and bolts. Shear-resistant shank high-carbon steel shank is larger than
most fastener shanks and resists torsional
shear. 1/4" hex shank for use with
cordless drills, impact drivers, corded
drills, and nut runners. Power groove
allows for use with quick change adapters.
Includes sizes: 3/16", 1/4", 5/16", 3/8",
10mm, 7/16", 1/2", and plastic case.
Mfg.
No.
Mfg.
No.
390631-D
EXTRACTOR S
SCREWBI TS
Product
No.
Product
No.
Order
Mult.
Weight
1/0/5
1.040
Unit
Cost
39.99 EA
Product
No.
Mfg.
No.
309552-E
21811
309561-E
21812
309570-D
21813
309589-D
21814
309598-D
21815
309605-B
21816
309614-D
21817
309623-E
21808
309632-F
21809
Description
Extractor No. 1. Screw size:
3/32 to 5/32, carded
Extractor No. 2. Screw size:
5/32 to 7/32, carded
Extractor No. 3. Screw size:
7/32 to 9/32, carded
Extractor No. 4. Screw size:
9/32 to 3/8 and 1/8 pipe,
carded
Extractor No. 5. Screw size:
3/8 to 5/8 and 1/4 pipe,
carded
Extractor No. 6. Screw size:
5/8 to 7/8 and 3/8 pipe,
carded
Extractor No. 7. Screw size:
7/8 to 1-1/8 and 1/2 pipe,
carded
Extractor No. 8. Screw size:
1-1/8 to 1-3/8 and 3/4 pipe,
bulk
Extractor No. 9. Screw size:
1-3/8 up and 1" pipe, bulk
Order
Mult.
Weight
1/6/48
.026
Unit
Cost
2.29 EA
1/6/48
.038
2.29 EA
1/6/48
.050
2.29 EA
1/6/48
.076
2.79 EA
1/6/48
.126
3.29 EA
1/6/48
.310
6.99 EA
1/6/48
.440
11.49 EA
1/6/48
.880
16.49 EA
1/6/48
1.500
24.99 EA
10-209
HAND TOOLS
Alden
Xtraktor Nut, Bolt, And Stud Remover - Flush face teeth for
HAND TOOLS
SCREW BITS
SCREWBI TS
SC REWBTI S
1/4" Socket Adapter - 1/4" shank. 1/4" socket adapter. 2" long.
Straight Flute Screw Extractor - Remove broken screws, bolts,
pipes, and studs. Made of special tool steel. Sharp, straight tapered
flutes bit into work without building. Drill
size to use is permanently marked on
shank of extractor. Carded for easy
display.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
398330-D
3567611C
1/4" Socket Adapter
1/5/25
.060
Unit
Cost
3.49 CD
SC REWBTI S
Product
No.
Mfg.
No.
343532-D
21861
343596-D
21862
343612-D
21863
343630-D
21864
343658-D
21865
Description
Extractor No. 1. Screw size:
1/4", 5/16"
Extractor No. 2. Screw size:
3/8"
Extractor No. 3. Screw size:
7/16"
Extractor No. 4. Screw size:
1/2", 9/16"
Extractor No. 5. Screw size:
5/8"
Order
Mult.
Weight
Unit
Cost
1/5/100
.038
2.49 EA
1/5/100
.038
2.79 EA
1/5/100
.062
2.99 EA
1/5/100
.088
3.29 EA
1/5/100
.126
4.29 EA
3-1/2" Power Bit - Designed for higher torque capabilities of power
tools and allows more clearance between the power tool and
fastener. No. 2 Phillips.
SCREWBI TS
1" Insert Bit - Compact and versatile allowing them to be used as hand
tool or power tool accessories.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
398365-D
3520251C
#2 3-1/2" Phil Screw Bit
1/5/25
.060
Unit
Cost
1.79 CD
SC REWBTI S
Product
No.
Mfg.
No.
398233-D
398241-D
398489-D
398268-D
3510052C
3510112C
35101125
351047XC
398276-D
398284-D
398292-D
3510192C
3511131C
3512032C
398306-D
3512052C
398314-D
3512072C
Description
No. 1 Phillips, 2 per card
No. 2 Phillips, 2 per card
No. 2 Phillips, 25 per bag
No. 2 Phillips drywall, 10 per
card
No. 3 Phillips, 2 per card
No. 8-10 slotted, 1 per card
No. 1 square recess, 2 per
card
No. 2 square recess, 2 per
card
No. 3 square recess, 2 per
card
Order
Mult.
Weight
1/5/25
1/5/25
1/5/25
1/5/25
.070
.070
.530
.110
1/5/25
1/5/25
1/5/25
.040
.040
.040
1/5/25
.040
1/5/25
.040
Unit
Cost
1.49 CD
1.49 CD
12.49 BG
6.49 CD
Power Bit - Designed for higher torque capabilities of power tools and
allows more clearance between the power
tool and fastener. 1-15/16" long.
1.49 CD Product
.99 CD No.
1.49 CD 398349-D
398357-D
1.49 CD
398381-D
398403-E
1.49 CD
398411-D
398438-D
Mfg.
No.
Description
Order
Mult.
Weight
3520031C
3520071C
3520111C
3521111C
3522031C
3522051C
No. 1 Phillips
No. 2 Phillips
No. 3 Phillips
No. 8-10 slotted
No. 1 square recess
No. 2 square recess
1/5/25
1/5/25
1/5/25
1/5/25
1/5/25
1/5/25
.050
.050
.050
.050
.050
.050
Unit
Cost
1.29 CD
1.29 CD
1.29 CD
1.29 CD
1.29 CD
1.29 CD
SCREWBI TS
SC REWBTI S
Magnetic Bit Holder - Magnetized to securely hold insert bits for
power screwdriving. Accepts 1/4" insert bits. 2-31/32" long.
6" Power Bit - Designed for higher torque capabilities of power tools
and allows more clearance between the power
tool and fastener.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
398373-D
398446-D
3520671C
3522311C
No. 2 Phillips
No. 2 square recess
1/5/25
1/5/25
.095
.100
Unit
Cost
3.29 CD
2.29 CD
SC REWBTI S
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
398322-D
3557181C
Magnetic Bit Holder
1/5/25
.110
10-210
Unit
Cost
6.29 CD
Power Magnetic Nutsetter - Lobular design drive reduces
stripping damage by driving fasteners on flats instead of forcing the
corners. For use with sheet metal
screws and other hexagonal head
fasteners.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
398454-D
398462-D
398470-D
3548121C
3548321C
3548521C
1/4" x 2-9/16"
5/16" x 2-9/16"
3/8" x 2-9/16"
1/5/25
1/5/25
1/5/25
.090
.090
.100
Unit
Cost
4.49 CD
4.79 CD
4.79 CD
We will gladly special order any items you require,
and we can ship most non-stocked items next day!
HAND TOOLS
SOCKET ADAPTER
Socket Adapt er
SCREWBI TS
Eazypower Corp
bit holders and hand-held drivers. Long-lasting plastic
container with flip top for easy access. Length: 1". 20
bits per case.
Product
No.
Mfg.
No.
300114-C
300169-C
300123-C
357120
357320
357220
Description
Order
Mult.
Weight
No. 2 drywall bits
No. 2 Phillips bits
No. 2 square recess bits
1/10/60
1/10/60
1/10/60
.300
.300
.300
Unit
Cost
8.29 PK
8.29 PK
8.29 PK
SCREWBI TS
Eazypower Corp
Left Hand Drill Bit - Designed to extract broken screws and bolts.
13-Piece Left Hand Drill Bit - Designed to extract borken screws
and bolts. High-speed steel, 135-point. Set includes 1 each:
1/16" thru 1/4" bits. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
324991-D
80988
13pc Left Hand Bit Set
1/6/24
1.167
Unit
Cost
31.99 PK
SCREWBI TS
Eazypower Corp
Rounded Nut and Screw Remover - Rounded nut, 1-way screw
remover ideal for removing rounded or damaged nuts and bolts. 1/4" hex
power bit.
High-speed steel, 135-point. 1 bit per card.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
324848-D
324893-D
324900-D
324928-D
324946-D
324955-D
324964-D
82381
82382
82383
82384
82385
82386
82387
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
1/6/48
1/6/48
1/6/48
1/6/48
1/6/48
1/6/48
1/6/48
.208
.250
.292
.333
.375
.417
.479
Unit
Cost
2.49 CD
2.79 CD
4.29 CD
5.99 CD
8.49 CD
13.79 CD
16.99 CD
SCREWBI TS
Eazypower Corp
5-Piece Left Hand Drill Bit - Designed to extract broken screws
and bolts. High-speed steel, 135-point. Set includes 1 each of:
1/8", 3/16", 1/4", 5/16", and 3/8" bits. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325017-C
325026-C
325035-D
325044-D
325062-D
325090-D
325099-D
325106-D
88243
88244
88245
88246
88247
81379
81395
88256
No. 6
No. 8
No. 10
No. 12
No. 14
No. 15
No. 16
No. 18
1/6/48
1/6/48
1/6/48
1/6/48
1/6/48
1/6/48
1/6/48
1/6/48
.333
.354
.375
.396
.438
.542
.583
.625
Unit
Cost
10.79 CD
10.99 CD
11.49 CD
11.79 CD
12.49 CD
24.49 CD
24.49 CD
24.49 CD
SCREWBI TS
Eazypower Corp
Screw Remover - Spin-it-Out™ stripped screw removers are ideal for
broken or worn out machine screws, bolts, or screws. 1/4"
hex power bit. 1 per card.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
324982-C
82380
5pc Left Hand Bit Set
1/6/36
.778
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
Unit
Cost
21.49 PK
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325115-D
325124-D
325142-D
325151-D
325160-D
82683
82684
82685
82686
82687
No. 0
No. 1
No. 2
No. 3
No. 4
1/6/48
1/6/48
1/6/48
1/6/48
1/6/48
.208
.229
.250
.271
.292
Unit
Cost
6.49 CD
6.79 CD
6.99 CD
7.29 CD
7.99 CD
10-211
HAND TOOLS
1" Insert Bit Pro-Pak™ Set - Screwdriver insert bit fits all standard
HAND TOOLS
SCREW BITS
SCREWBI TS
SC REWBTI S
Eazypower Corp
Eazypower Corp
3-Piece Screw Remover - Spin-it-Out™ stripped screw removers
11" Flex A Bit Extension - 11", Flex A Bit for consumer use. Flexes
are ideal for broken or worn out machins screws, bolts, or
screws. 1/4" hex power bit. Includes 1 each of: No.
1, No. 2, and No. 3 screw removers. Carded.
to a full 90°. Outer cover does not rotate so it can be used
safely at any speed. Rated for 3.5 ft./lb. of torque. Designed
for light-duty screwdrivers and drills. 1/4" hex shank.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325179-C
82682
3pc Screw Remover Set
1/6/36
.500
Unit
Cost
19.49 CD
SCREWBI TS
Eazypower Corp
5-Piece Screw Remover - Spin-it-Out™ stripped screw removers
are ideal for broken or worn out machine screws, bolts, or
screws. 1/4" hex power bit. Includes 1 each of: No.
0, No. 1, No. 2, No. 3, and No. 4 screw removers,
and plastic case.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325188-C
82681
5pc Screw Remover Kit
1/6/24
.833
Unit
Cost
31.99 CD
SCREWBI TS
Eazypower Corp
7-1/2" Flex A Bit Extension - 7-1/2", Flex A Bit for consumer use.
Flexes to a full 90°. Outer cover does not rotate so it can
be used safely at any speed. Rated for 3.5 ft./lb. of
torque. Designed for light-duty screwdrivers and drills. 1/
4" hex shank.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325204-D
73610
7-1/2" Flex-a-bit
1/6/36
.917
10-212
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325197-D
73609
11" Flex-a-bit
1/6/24
.667
Unit
Cost
9.29 CD
SC REWBTI S
Eazypower Corp
11" Flex A Bit Extension - 11". 1/4" hex shank. Flex A Bit for
heavy-duty use. Flexes to a full 90°. Outer cover does not
rotate so it can be used safely at any speed. Rated for 13
ft./lb. of torque. Designed for electric and rechargable drills
or screwdrivers.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325213-D
73611
11" Flex-a-bit Plus
1/6/24
1.083
Unit
Cost
12.79 CD
SC REWBTI S
Eazypower Corp
11" Flex A Bit Quick Connect - 11". 1/4" hex shank. EazyLoad
Qwik disconnect Flex A Bit for heavy-duty use. Flexes to a full
90°. Outer cover does not rotate so it can be used safely at
any speed. Rated for 13 ft./lb. of torque. Designed for
electric and rechargable drills or screwdrivers.
Unit
Cost
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
5.79 CD
325222-D
73614
11" Ezload Flex-a-bit
1/6/24
1.083
Unit
Cost
15.49 CD
Save time by letting us locate those
hard-to-find items for you!
HAND TOOLS
SCREW BITS
SCREWBI TS
STEPDR IL S
Eazypower Corp
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325286-D
79001
10pc Flex-a-bit
1/6/24
1.375
Unit
Cost
26-Piece Flex It All Kit - 26-piece 11" Flex it All kit. Includes FREE
1/4" EazyLoad Qwik disconnect, No. 0, No. 2, Phillips,
No. 4-5, 8-10 slotted, R1, R2 square
recess, T15 Tee*star® (fits Torx®
screws), 1/4" socket adapter 1", 3/16",
1/4", 9/32", 5/16", 11/32", 3/8", 7/16",
15/32", and 1/2" (1/4" sq.) sockets,
magnetic bit holder, ratcheting
reversible screwdriver, 2 tip and socket
plastic storage holders, heavy-duty
plastic storage case with handle, for
light-duty applications.
Description
325302-D
82100
26pc Flex-a-bit
Description
Order
Mult.
Weight
302422-B
10231
1/8-1/2 Unibit
1/5/25
.180
Unit
Cost
21.49 EA
STEPDR IL S
Eazypower Corp
Mfg.
No.
Mfg.
No.
15.49 CD
SCREWBI TS
Product
No.
Product
No.
Unibit® Step Drill - Single concave flute design creates perfectly
round holes in thin materials including steel, brass,
copper, and aluminum. Constructed of industrial
grade, high speed molybdenum steel.
Graduated in 1/16" increments to drill 6 hole
sizes from 3/16" to 1/2". 1/4" shank. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302430-B
2
3/16-1/2 Unibit
1/5/25
.184
Unit
Cost
21.49 EA
STEPDR IL S
Order
Mult.
Weight
1/0/6
2.000
Unit
Cost
19.79 CD
SCREWBI TS
Eazypower Corp
Unibit® Step Drill - Single concave flute design creates perfectly
round holes in thin materials including steel, brass, copper,
and aluminum. Constructed of industrial grade, high speed
molybdenum steel. Graduated in 1/16" increments to drill 9
hole sizes from 1/4" to 3/4". 3/8" shank. Carded.
11" Flex Wrench - 11", 3/8" square drive, Flex A Wrench for
heavy-duty use with 3/8" sockets. Flexes to a full 90°.
Outer cover does not rotate so it can be used safely at any
speed. Rated for 13 ft./lb. of torque. Designed for electric
and rechargable drills or screwdrivers.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
302449-B
3
1/4-3/4 Unibit
1/5/10
.190
Unit
Cost
38.49 EA
SPA DEBI TS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
325268-D
73613
3/8" Flex-a-wrench
1/6/24
1.083
We can become your single-source supplier
on many of the products you currently use!
Unit
Cost
12.79 CD
Unibit® Step Drill - Single concave flute design creates perfectly
round holes in thin materials including steel, brass, copper,
and aluminum. Constructed of industrial grade, high speed
molybdenum steel. Graduated in 1/16" increments to drill 12
hole sizes from 3/16" to 7/8". 3/8" shank. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
368288-B
4
3/16-7/8 Unibit
1/5/10
.300
Unit
Cost
45.99 EA
10-213
HAND TOOLS
10-Piece 7-1/2" Flex A Bit - 10-piece 7-1/2" Flex A Bit kit. Includes:
Unibit® Step Drill - Single concave flute design creates perfectly
No. 1, No. 2, Phillips, No. 6-8, 8-10 slotted, R1 R2
round holes in thin materials including steel, brass, copper,
square recess, T10, T15 Tee*Star® (fits Torx®
and aluminum. Constructed of industrial grade, high speed
screws) 2" tips, magnetic bit holder, double blister, for
molybdenum steel. Graduated in 1/32" increments to drill 13
light-duty applications
hole sizes from 1/8" to 1/2". 1/4" shank. Carded.
HAND TOOLS
SPADE BITS
Spade Bit s
WOOD BI TS
Speedbor® 2000SL Spade Bit - Lock-N-Load®. Short length bit Speedbor® 2000™ Wood Bit Set - Lock-N-Load®. 6 Speedbor®
has all the same features and benefits as standard length but
allows the user to bore holes into tight places such as
between studs and inside cabinets. 4" long. Carded.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
379433-D
379441-C
379468-C
379476-D
379484-C
379492-C
379506-C
379514-C
87908
87910
87912
87914
87916
87920
87924
87950
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
1-1/2"
3-piece set (1/2", 3/4", 1")
1/6/36
1/6/36
1/6/36
1/6/36
1/6/36
1/3/36
1/3/36
1/6/18
.092
.089
.089
.089
.105
.138
.168
.278
2000™ bits in a metal workshop rack. Includes sizes: 3/8",
1/2", 5/8", 3/4", 7/8", and 1".
Unit
Cost
2.79 EA
2.99 EA
2.99 EA
3.29 EA
3.29 EA
4.79 EA
4.79 EA
8.79 EA
STEPDRLI S
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
353469-B
88888
6pc Spade Bit Set
1/6/18
.113
Unit
Cost
16.99 SET
WOOD BI TS
Speedbor® 2000 Spade Bit Set - Lock-N-Load®. 13 Speedbor®
2000™ bits in a plastic pouch. Includes sizes: 1/4", 5/16",
3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/
4", 13/16", 7/8", 15/16", and 1".
Speedbor® 2000 Spade Bit - Lock-N-Load®. Extended spurs
scribe hole for faster chip clearance. Micro-Groove point and
cutting edges for faster, cleaner boring. Forged in 1 piece of
special grade tool steel. Heat-treated full length. Precision
ground shank.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
312290-C
88894
13pc 2000 Bit Set
1/6/18
1.500
Unit
Cost
35.99 SET
WOOD BI TS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
324124-D
324132-D
324140-D
324159-D
324167-D
324175-D
324183-D
324191-D
324213-D
324221-D
324248-D
324256-D
324264-D
324272-D
324280-D
324299-D
324302-D
88804
88805
88806
88807
88808
88809
88810
88811
88812
88813
88814
88815
88816
88818
88820
88822
88824
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1/6/72
1/6/72
1/6/72
1/6/72
1/6/72
1/6/72
1/6/72
1/6/72
1/6/72
1/6/72
1/6/72
1/6/72
1/6/72
1/3/36
1/3/36
1/3/36
1/3/36
.042
.052
.063
.073
.083
.094
.108
.125
.133
.142
.142
.142
.142
.333
.167
.167
.167
10-214
Unit
Cost
Speedbor® 2000XL Long Spade Bit - 16" overall length.
Extended spurs scribe hole for faster chip clearance. Micro-Groove point
and cutting edges for faster, cleaner
boring. Forged in 1 piece of special
grade tool steel. Heat-treated full
length. Precision ground shank. Not for use in drill presses.
2.99 EA Product
2.99 EA No.
2.99 EA 312487-C
2.99 EA 313416-C
2.99 EA 313424-C
3.29 EA 313467-C
3.29 EA 313491-C
3.29 EA 313505-C
3.29 EA
3.49 EA
3.49 EA
3.49 EA
3.49 EA
5.29 EA
5.29 EA
5.29 EA
5.29 EA
Mfg.
No.
Description
Order
Mult.
Weight
88706
88708
88710
88712
88714
88716
3/8" XL
1/2" XL
5/8" XL
3/4" XL
7/8" XL
1" XL
1/6/36
1/6/36
1/6/36
1/6/36
1/6/36
1/6/36
.250
.333
.333
.344
.344
.344
Unit
Cost
8.29 EA
8.79 EA
8.99 EA
9.49 EA
9.79 EA
10.49 EA
The product representations in this catalog are for reference only,
and are subject to change without notice.
HAND TOOLS
WOO DBI TS
Bit Extension - Double set screw with Allen wrench. Recommended
Auger Bit - Standard, solid center. Double cutter with extension lip.
for all 1/4" round shank drill bits requiring extra reach.
Follows 5/8" and larger bits through hole. 1/4" shank.
Pouched. Only fits round shank Speedbor® or Do it
Best® brand bits.
Clear open throat provides quick
clearance for chips. Prevents clogging.
Polished steel finish. For wood boring
hand brace only.
Product
No.
Mfg.
No.
305871-C
306289-C
88702
88601
Description
Order
Mult.
Weight
6"
12"
1/6/48
1/6/48
.208
.375
Product
No.
Mfg.
No.
306458-C
43604
306467-C
43605
306476-C
43606
306485-C
43607
306494-C
43608
306500-C
43609
306519-C
43610
306528-C
43611
306537-D
43612
306546-C
43613
306555-C
43614
306564-C
43615
306573-C
43616
Unit
Cost
3.99 EA
4.99 EA
WO OD BITS
Car Bit - For construction jobs and general all-around boring of deep,
clean holes. 12" twist, 18" overall. Solid
center. Double cutter. New 2-way hex
shank, furnished with taper square
shank for use with bit brace. Can be cut off between square shank and
twist for use as a straight shank auger bit in electric drills. Hex shape of
shank allows use of straight shank in bit braces as well as drills.
Description
1/4", 3-1/2" twist length, 7-1/
2" overall length
5/16", 3-5/8" twist length,
7-5/8" overall length
3/8", 3-3/4" twist length, 7-3/
4" overall length
7/16", 3-7/8" twist length,
7-7/8" overall length
1/2", 4" twist length, 8"
overall length
9/16", 4-1/8" twist length,
8-1/8" overall length
5/8", 4-1/4" twist length, 8-1/
4" overall length
11/16", 4-3/8" twist length,
8-3/8" overall length
3/4", 4-1/2" twist length, 8-1/
2" overall length
13/16", 4-5/8" twist length,
8-5/8" overall length
7/8", 4-9/16" twist length,
8-3/4" overall length
15/16", 4-11/16" twist length,
8-7/8" length
1", 4-13/16" twist length, 9"
overall length
Order
Mult.
Weight
Unit
Cost
1/0/6
.083
10.79 EA
1/0/6
.125
10.79 EA
1/0/6
.125
10.79 EA
1/0/6
.167
10.79 EA
1/0/6
.167
10.79 EA
1/0/6
.208
10.99 EA
1/0/6
.250
11.49 EA
1/0/6
.208
11.79 EA
1/0/6
.292
12.49 EA
1/0/6
.333
13.49 EA
1/0/6
.375
13.99 EA
1/0/6
.417
14.79 EA
1/0/6
.417
14.99 EA
WOO DBI TS
Product
No.
Mfg.
No.
Description
306341-C
306350-C
303184-C
306369-C
47706
47708
47710
47712
3/8"
1/2"
5/8"
3/4"
Order
Mult.
Weight
1/0/6
1/0/6
1/0/6
1/0/6
.333
.417
.542
.667
Unit
Cost
19.79 EA
19.79 EA
19.99 EA
21.99 EA
WO OD BITS
Power Ship Auger Bit - 17" overall length, with screw point. Single
twist type. Single cutter and side lip. Medium fast
screw point. 12" twist, 5" shank. Made of
quality tool steel, highly polished. Wide
open throat. Designed for use with 1/2"
electric drills. For heavy construction and
repair work performed in mines or on docks and bridges. Pouched.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
315591-C
315605-C
315613-C
315621-C
315648-C
315656-C
315664-C
315672-C
315680-C
315699-C
315702-C
300594-C
47406
47407
47408
47409
47410
47411
47412
47413
47414
47415
47416
47418
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/8"
1/0/24
1/0/24
1/0/24
1/0/24
1/0/24
1/0/24
1/0/24
1/0/24
1/0/24
1/0/24
1/0/24
1/0/12
.400
.433
.483
.700
.783
.817
.900
.950
1.150
1.233
1.400
1.792
Call us if you need an item that you don’t find in this catalog...
We stock many items that are not listed!
Unit
Cost
24.99 EA
25.49 EA
24.99 EA
25.99 EA
26.49 EA
28.49 EA
29.49 EA
31.49 EA
32.49 EA
33.49 EA
34.99 EA
42.49 EA
I-100™ Power Drill Auger Bit - Dual-purpose shank for use in
hand braces and 3/8" and larger electric drills. Specially designed
cutting head and screw point makes for
cleaner and faster boring in all types of
wood. Ground from special alloy tool
steel, fully heat-treated. Overall length
8-1/2". Boring depth 6".
Product
No.
Mfg.
No.
309923-C
49904
309915-C
49905
309907-C
49906
309893-C
49907
309885-C
49908
309877-C
49909
309869-D
49910
309850-C
49911
309842-C
49912
309834-C
49913
309826-C
49914
309818-C
49915
309796-C
49916
Description
1/4" diameter, 7/32" hex
shank
5/16" diameter, 7/32" hex
shank
3/8" diameter, 7/32" hex
shank
7/16" diameter, 7/32" hex
shank
1/2" diameter, 7/32" hex
shank
9/16" diameter, 5/16" hex
shank
5/8" diameter, 5/16" hex
shank
11/16" diameter, 5/16" hex
shank
3/4" diameter, 5/16" hex
shank
13/16" diameter, 5/16" hex
shank
7/8" diameter, 5/16" hex
shank
15/16" diameter, 5/16" hex
shank
1" diameter, 5/16" hex shank
Order
Mult.
Weight
Unit
Cost
1/6/24
.083
10.99 EA
1/6/24
.100
10.99 EA
1/6/24
.100
10.99 EA
1/6/24
.133
10.99 EA
1/6/24
.167
10.99 EA
1/6/24
.217
10.99 EA
1/6/24
.233
11.49 EA
1/6/24
.250
11.49 EA
1/6/24
.300
11.99 EA
1/6/24
.383
13.49 EA
1/6/24
.383
13.79 EA
1/6/24
.433
14.49 EA
1/6/24
.467
14.79 EA
10-215
HAND TOOLS
WOOD BITS
WO OD BITS
HAND TOOLS
WOOD BITS
Continued From Previous Column
WO DBI TS
Expansive Auger Bit - Irwin® Lockhead. Quick size adjustment.
Drop-forged in 1-piece from special analysis steel;
heat-treated full length. Medium slow
screw pitch. Wedge-type blade lock is
positive in action. Highly polished finish.
In white plastic pouch with clear front.
Hang-up hole. Instructions printed on
back of pouch. Large size, with 2
cutters, 1 cutting 7/8" to 1-3/4", the other cutting 1-3/4" to 3", weight each:
9/16 lb., 6 in a box.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
306859-C
44202
7/8-3" Expansive Bit
1/6/24
.542
Unit
Cost
31.99 EA
WO DBI TS
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
336657-D
336675-D
336684-D
336755-D
336764-D
336844-D
330639-D
311308-D
311294-D
333379-D
336657
336675
336684
336755
336764
336844
330639
311308
311294
333379
2-7/8" Hole Saw
3" Hole Saw
3-1/8" Hole Saw
3-1/4" Hole Saw
3-1/2" Hole Saw
4" Hole Saw
4-1/8" Hole Saw
4-1/2" Hole Saw
5" Hole Saw
6" Hole Saw
1/2/24
1/2/24
1/2/16
1/2/16
1/2/16
1/2/16
1/2/16
1/2/10
1/2/10
1/2/10
.709
.736
.905
.935
.985
1.106
.900
1.344
1.526
2.106
Unit
Cost
17.49 EA
17.99 EA
17.99 EA
17.99 EA
17.99 EA
24.99 EA
26.99 EA
45.99 EA
57.99 EA
79.99 EA
WOOD BI TS
M. K. Morse
Do it Best® Hole Saw Pilot Drill - Made of high-speed steel, 1/4"
x 4-5/16". Fits all Do it Best™ hole saws model No. 334748 thru
333379.
Lockhead Adjustable Bit - Precision-ground shank allows this bit
to be used in a drill press. Shank has 3 equally spaced
flats for use in drill presses having 3-jaw
chucks. Drop-forged 1-piece
construction with wedge-type blade lock
and medium slow screw pitch.
Product
No.
Mfg.
No.
323004-C
322997-C
44801
45002
Description
Order
Mult.
Weight
5/8" to 1-3/4"
7/8" to 3"
1/6/24
1/6/24
.354
.583
Unit
Cost
29.49 EA
43.49 EA
Product
No.
Mfg.
No.
Description
336853-D
336853
Pilot Drill
Order
Mult.
Weight
1/10/200
.050
Unit
Cost
4.49 EA
WOOD BI TS
M. K. Morse
Do it Best® Hole Saw Extension - 12" long with 7/16" shank.
WO DBI TS
M. K. Morse
Do it Best® Bi-Metal Hole Saw - High-speed steel hole saw will
cut wood, plastic, or any machinable metal, including tool steel
and stainless. Cuts material up to 1-1/2"
thick.
NOTE: Pilot drill sold separately (model
No. 336853).
Product
No.
Mfg.
No.
334748-E
334748
334828-E
334828
335042-E
335042
335051-E
335051
335060-D
335060
335328-D
335328
335426-D
335426
335435-D
335435
335578-D
335578
335603-D
335603
335729-D
335729
335738-D
335738
335961-D
335961
335989-D
335989
336176-D
336176
336256-D
336256
325104-D
325104
325112-D
325112
336470-D
336470
336620-D
336620
336639-D
336639
336648-D
336648
Continued Next Column
10-216
Description
Order
Mult.
Weight
5/8" Hole Saw
3/4" Hole Saw
7/8" Hole Saw
15/16" Hole Saw
1" Hole Saw
1-1/16"bi-metal Hole Saw
1-1/8" Hole Saw
1-1/4" Hole Saw
1-5/16" Hole Saw
1-3/8" Hole Saw
1-1/2" Hole Saw
1-5/8" Hole Saw
1-3/4" Hole Saw
1-7/8" Hole Saw
2" Hole Saw
2-1/16" Hole Saw
2-1/8" Hole Saw
2-1/4" Hole Saw
2-3/8" Hole Saw
2-1/2" Hole Saw
2-5/8" Hole Saw
2-3/4" Hole Saw
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/20
1/2/24
1/2/24
1/2/24
1/2/24
1/2/24
.222
.239
.200
.290
.312
.357
.384
.350
.464
.494
.410
.427
.449
.470
.490
.488
.500
.593
.618
.643
.659
.684
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
336942-D
336942
12" Arbor Extension
1/0/20
.810
Unit
Cost
8.99 EA
HOLESAWS
Unit
Cost
Lenox® Bi-Metal Hole Saw - M2 high-speed steel cutting edge
welded to a shatter-resistant spring steel back. Cuts up to 1-5/8"
deep. 4/6 Vari-Tooth® design for aggressive cutting
action and reduced vibration. 3/16" thick heavy-duty
backing plate is more durable than stamped backing cups
and eliminates need for torque driving plate. Use for
heavy-duty cutting in stainless and mild steel, cast-iron,
copper, brass, aluminum, plastics, wood, and
composition board.
9.49 EA
9.49 EA
9.49 EA
9.49 EA
9.99 EA
9.99 EA
9.99 EA
9.99 EA Product
Mfg.
9.99 EA No.
No.
10.49 EA 338672-C
K10L
10.49 EA 360325-C
K12L
10.49 EA 360333-C
K14L
12.99 EA 360341-C
K16L
12.99 EA 360368-C
K18L
12.99 EA 360376-C
K20L
15.99 EA 360384-C
K22L
15.99 EA 360392-C
K24L
15.99 EA 360406-C
K26L
15.99 EA 360414-C
K28L
17.49 EA 360422-C
K30L
17.49 EA 360430-C
K32L
17.49 EA Continued Next Column
Description
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
1-3/4"
1-7/8"
2"
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.050
.100
.100
.150
.200
.200
.200
.200
.250
.250
.250
.250
Unit
Cost
8.49 EA
8.49 EA
8.49 EA
9.29 EA
9.29 EA
9.29 EA
9.79 EA
9.79 EA
9.79 EA
12.49 EA
12.49 EA
12.49 EA
Some products shown may need to be special ordered
for your convenience!
HAND TOOLS
HOLE SAWS
Continued From Previous Column
Product
No.
Mfg.
No.
Description
360449-C
360457-C
339059-C
360465-C
339202-C
339725-C
360473-C
339814-C
360481-C
340014-C
360503-C
K34L
K36L
K38L
K40L
K42L
K44L
K48L
K52L
K56L
K64L
K66L
2-1/8"
2-1/4"
2-3/8"
2-1/2"
2-5/8"
2-3/4"
3"
3-1/4"
3-1/2"
4"
4-1/8"
HOLESAWS/ CUT ERS
Order
Mult.
Weight
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
0/0/1
.300
.300
.350
.400
.400
.500
.550
.650
.750
.950
1.050
Unit
Cost
14.79 EA
14.79 EA
14.79 EA
15.49 EA
15.49 EA
15.49 EA
15.99 EA
16.79 EA
16.79 EA
25.49 EA
26.99 EA
Mandrel Adaptor - Adapts No. 1L, 4L, and 5L mandrels to Lenox®
hole saw sizes 1-1/4" to 6". 1 per vinyl pouch.
Lenox® Hole Saw Extension - For use with Lenox® bi-metal hole
saws (Lenox® model No. 1L, 2L, 3L, and Lenox®
Leader® wood bits model No. LL100
thru LL256). Chuck size 1/2".
Product
No.
Mfg.
No.
Description
340669-C
340847-C
12X
18X
12" long
18" long
Order
Mult.
Weight
0/0/1
0/0/1
.800
1.150
Unit
Cost
14.49 EA
21.49 EA
Product
No.
Mfg.
No.
Description
360546-C
AA1
Mandrel Adaptor
Order
Mult.
Weight
0/0/1
.050
Unit
Cost
3.49 EA
HOLESAWS
Pilot Drill Bit - 1/4" high speed steel. 1 per vinyl pouch.
HOLE SAWS
Hole Saw Mandrel - For use with Lenox® bi-metal hole saws.
Product
No.
Mfg.
No.
340928-C
2L
360511-C
4L
360562-C
5L
360554-C
6L
340901-C
7L
Description
Use for hole saws 1/2" to
1-3/16", 1/4" hex shank
Use for hole saws 9/16" to
1-3/16", 1/4" round shank
Use for hole saws 9/16" to
1-3/16", 3/8" hex shank
Use for hole saws 1-1/4" to
6", 3/8" hex shank
Use for hole saws 1-5/8" to
6", 3/8" hex; Advantage™
ejector arbor makes removal
of material from the inside of
a hole saw much easier
Order
Mult.
Weight
1/0/5
.500
21.49 EA
1/0/5
.200
9.79 EA
1/0/5
.150
12.79 EA
1/0/5
.350
19.49 EA
0/0/1
.750
36.49 EA
For a complete overview on all of the products we handle,
call us directly or ask your representative for details!
Product
No.
Mfg.
No.
360538-C
4321
360570-C
56PD
Unit
Cost
Description
1/4" x 4" fits Mandrel model
No. 1L, 2L, and 4L
1/4" x 3" fits Mandrel model
No. 5L and 6L
Order
Mult.
Weight
Unit
Cost
1/0/10
.050
4.79 EA
1/0/10
.050
4.29 EA
HOLESAWS
Hole Saw - Cuts holes 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/4", and 2-1/2"
thru wood, metal, pressed wood or plastics up to
1-3/4" thick. Perfect circle blades are made of
electric furnace steel. Automatic slug ejector
prevents clogging. Built-in blade selector on
housing fits any electric drill, lathe, or drill press.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
348109-D
HC7D
1-3/4 Depth Hole Saw
1/5/25
2.000
Unit
Cost
10.99 EA
10-217
HAND TOOLS
HOLE SAWS
HAND TOOLS
DRILL ACCESSORIES
DRLI AC ES O RIE S
DRIL ACCES O RIES
Slim Taper File - Designed to sharpen cutting edges of Lenox®
Leader® auto-feed wood boring bits. 6" file
with plastic handle. 10" overall length.
Boxed.
Product
No.
Mfg.
No.
Description
379050-C
STF
Slim Taper File
Order
Mult.
Weight
0/0/1
.250
Drill Bit Stand - For bench use, or may be attached to pegboard or
wall. Made of steel; holes with contrasting
figures. Hole sizes: 1/16" thru 1/2" by
64ths. Color: Green.
Unit
Cost
8.29 EA
DRLI AC ES O RIE S
General Tools
Circle Cutter - For cutting circles in sheet metal, mild steel, hardboard,
plywood, brass, copper, etc. Combination
1/4" round and square shank permits it to
be used in either drill chuck or hand brace.
For circles 7/8" to 4" in diameter.
Product
No.
Mfg.
No.
Description
355038-C
60172
Drill Bit Stand
Order
Mult.
Weight
1/0/5
.500
Unit
Cost
5.49 EA
DRIL ACCES O RIES
General Tools
Fractional Drill Gauge - Heavy-gauge steel, 5" L. x 2" W. Hole sizes
and decimal equivalents etched on face. Drill sizes
1/16" to 1/2" by 64ths.
Product
No.
Mfg.
No.
Description
306760-D
4
7/8-4" Circle Cutter
Order
Mult.
Weight
1/0/6
.333
Unit
Cost
14.79 EA
DRLI AC ES O RIE S
General Tools
Circle Cutter - Adjust from 1" to 6" diameter circles. Square shank.
Replaceable 3/16" high-speed steel bit and
1/4" pilot drill. Made of heat-treated tool
steel. For use in drill press, drill stand,
or bit brace. Hex wrench included.
Product
No.
Mfg.
No.
Description
318752-D
5B
1-6" Circle Cutter
Order
Mult.
Weight
1/0/3
.500
Unit
Cost
19.49 EA
Product
No.
Mfg.
No.
Description
318744-D
14
Fractional Drill Gauge
Order
Mult.
Weight
1/0/5
.250
Unit
Cost
14.49 EA
DRIL ACCES O REI S
Dowel Center Set - Quick and accurate method to locate, transfer,
and match dowel holes. Made of plated steel. Set
includes 2 each of 1/4", 5/16", 3/8", and
1/2" diameters.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
318736-D
25860
1/2" Dowel Center Set
1/0/10
.200
Unit
Cost
4.99 EA
DRIL AC ES O RIE S
General Tools
DRIL ACCES O RIES
Plug Cutter - Made of hardened alloy steel with 3/8" shank. Plugs
permit matching wood colors and assure perfect
fit in countersunk screw holes. Cutters
automatically eject plugs from stock 3/
4" or less.
Product
No.
Mfg.
No.
Description
306984-D
328112-D
328121-D
31A
31B
31C
3/8" diameter
1/2" diameter
5/8" diameter
General Tools
Doweling Jig - A precision jig that assures accurate line up of dowel
holes in furniture and carpentry. Clamps
onto work from 0" to 4" in width.
Revolving turret has 6 twist drill sizes, 3/
16", 1/4", 5/16", 3/8", 7/16", and 1/2".
Order
Mult.
Weight
1/0/5
1/0/5
1/0/5
.083
.083
.125
Unit
Cost
10.49 EA
10.49 EA Product
10.49 EA No.
345822-C
10-218
Mfg.
No.
Description
840
Doweling Jig
Order
Mult.
Weight
0/0/1
.343
Unit
Cost
38.99 EA
For your convenience, if an item is no longer available,
we will gladly substitute a similar product!
HAND TOOLS
DRILL ACCESSORIES
DRI L AC ES SORI ES
HAND DRIL S
General Tools
Drill Stop Set - Use with twist drills to prevent excessive penetration.
Black oxide finish on cold rolled steel.
Sizes included: 3/16", 1/4", 5/16", 3/8",
7/16" and 1/2". Includes hex wrench.
Mfg.
No.
Description
319139-D
S838
Drill Stop
Order
Mult.
Weight
1/0/5
.136
screwdrivers and drills. Flexes to 90°. Outer case does not rotate.
Accepts 1/4" hex insert bits. 1/4" hex shank. Carded.
Unit
Cost
14.49 SET
DRI L AC ES SORI ES
General Tools
Product
No.
Mfg.
No.
Description
382361-D
09146
11" Bit Extension
Order
Mult.
Weight
1/0/6
.417
Unit
Cost
13.49 EA
Precision Drill Guide - Drills accurate right angeled or variable
angled holes with built in protractor scale. Adjusts to
45° angle. Built in depth stop. Slide lock for
sanding and buffing applications. V-groove for
positioning round stock, pipe or tubing. Use with
3/8" and 1/2" portable electric drills. Includes
chuck and chuck key.
Drill Pump - Attaches to any electric drill for use on small pumping
jobs. Lifts water up to 10’ after priming.
Pumps as much as 6 gallons per
minute. Uses regular garden hose
connections.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
355194-C
36/37
Drill Guide
0/0/1
2.300
353281-D
CM10
Drill Pump
1/0/6
.438
Unit
Cost
HAND DRIL S
Simer/Flotec/Omni
43.99 EA
Unit
Cost
8.99 EA
HAND DRIL S
HAND DRI L S
Dico Prod. Corp.
36" Flex Shaft - Converts any drill or bench motor into a powerful flex
shaft machine. Can be used in hard to reach
areas. 6 layer heavy-duty steel internal cable
encased by rugged vinyl covered spring.
Handle and drive on self-lubricated ball
bearings. 0-1/4" chuck capacity.
Hand Drill - 1/4" capacity 3-jaw sintered iron steel chuck. All-steel
frame nickel-plated. Wood handle. Gear
finished in red. Solid smooth running
gear and single pinion. 10-1/2" overall
length.
Product
No.
Mfg.
No.
Description
Order
Mult.
Weight
311567-C
42
10-1/2" Hand Drill
1/0/20
9.167
Unit
Cost
14.99 EA
HAND DRIL S
Fiskars Brands Inc.
Hand Drill - Fits in palm of hand. Lightweight, compact, easy-to-use.
Product
No.
Mfg.
No.
Description
309125-C
541887B
36" Flex Shaft
Service is our priority!
Our commitment is to meet your needs!
Order
Mult.
Weight
1/0/5
1.340
Unit
Cost
33.99 EA
Tough ABS plastic housing. Enclosed metal
gears. Accepts all drill sizes up to 1/4"
diameter.
Product
No.
Mfg.
No.
Description
300233-C
8511 6984
Hand Drill
Order
Mult.
Weight
1/0/4
.750
Unit
Cost
13.49 EA
10-219
HAND TOOLS
Product
No.
11" Flexible Bit Extension - Flexible extension for all cordless
— Notes —

Similar documents