Provisional - GM Turf Equipment

Transcription

jiu
BROUWER SOD HARVESTER
John Deere. Model 6230 Tractor
John Deere. Model 6330 Tractor (Europe)
John Deere. Model 6105 Tractor
John Deere. Model 6115 Tractor (Europe)
PARTS LIST
Provisional
Brouwer Turf
23324 Woodbine Avenue, Keswick Ontario Canada L4P 3E9
Tel (905) 476-6222 Fax (905) 476-6744 Web Site www.brouwerturf.com
[email protected]
KM99182
May 2014
STATEMENT OF LIMITED WARRANTY
________________________________________________________________________
Kesmac and Brouwer Turf warrants its full line of equipment to be free from defects in material and factory workmanship for a
period of 12 months. This warranty begins on the date of sale or use of the equipment to the original purchaser. This statement does
not extend or limit engine, tractor or component warranties in which the engine, tractor or component manufacturers may carry
extended time periods up to 24 months. Engine, tractor or component warranty claims will be subject to the engine, tractor or
components manufacturer’s approval.
Replacement Parts carry a 90 day replacement warranty and are reimbursed to the dealer. All electrical and hydraulic parts are
limited by this policy and will only be covered upon approval by the service department after inspection of the part. The installation
and removal of a part will automatically place that part under the replacement parts warranty.
This warranty is limited exclusively to equipment or accessories manufactured or supplied by Kesmac and Brouwer Turf and are
subject to the inspection and analysis by the company to conclusively identify the nature and cause of failure.
PRODUCT REGISTRATION FORM must be completely filled out, signed by the customer at the original date of installation, and
returned to Kesmac and Brouwer Turf before any claims will be considered.
Kesmac and Brouwer Turf reserves the right to incorporate improvements in material and design of its products without notice and is
not obligated to make the same improvements to equipment previously manufactured.
Kesmac and Brouwer Turf is not obliged under any warranty policy different from the Kesmac Brouwer Turf warranty policy as
published above.
KESMAC AND BROUWER TURF RESPONSIBILITES
Kesmac and Brouwer Turf ‘s obligation under the terms of this warranty is limited to the repair, replacement or credit, at its option, of
the equipment, parts or supply items that conform to its warranty.
DEALER’S RESPONSIBILITIES
1. Only factory-trained service or approved personnel will be permitted to perform warranty service on Kesmac and Brouwer Turf
equipment.
2. All major warranty claims exceeding $650.00 (in total including parts and labour) must be authorized by Kesmac and Brouwer
Turf before work is performed.
3. All replacement parts used in warranty situations must be furnished by Kesmac and Brouwer Turf or approved by Kesmac and
Brouwer Turf personnel. The use of non-recommended oil could nullify warranty.
OWNERS RESPONSIBILITIES
The owner is obligated to operate and maintain the equipment in accordance with the recommendations published by Kesmac and
Brouwer Turf in the owners/operators manual for the unit. The owner is responsible for the costs associated with such maintenance
and operating adjustments that may be required on a regularly scheduled basis. Where applicable the owner is responsible for
transportation to and from the dealership or service calls made by the dealer.
CONDITIONS THAT VOID WARRANTY
This warranty shall not apply to equipment which:
•
1. Has had repairs or modifications not authorized by Kesmac and Brouwer Turf.
•
2. Has been subject to abuse, improper maintenance, or improper application.
•
3. Has been modified from original equipment specifications.
WARRANTY EXCEPTIONS
This warranty does not apply to the following items:
•
1. Wear items including blades, cutting edges, cutting arms, spark plugs, belts, filters, bearings, sprockets, chains, tires,
light bulbs, lubricants and fluids etc. Cost of normal maintenance including replacement of service items.
•
2. Damages to engine/drive systems caused by lack of/or improper lubricants and/or fluids.
•
3. Damages arising from accident, misuse or neglect.
•
4. Damages to engine/drive systems caused by improper operation and/or maintenance.
•
5. Kesmac and Brouwer Turf will not be liable for any incidental or consequential damage or injuries, including but not limited to
loss of profits, loss of crops, rental of substitute equipment, or other commercial loss or for damage to the equipment in which the
Company Product is installed.
FREIGHT CARRIER DAMAGE
Claims for equipment damaged in transit should be referred to the freight carrier. Visible damage should be reported immediately and
concealed damage as soon as possible, in accordance with freight carrier regulations.
September 2010
BROUWER
ROBOMAX JOHN DEERE SOD HARVESTER
PARTS LIST INDEX
SECTION 1 – Conveyors
Main Conveyor Frame
Main Conveyor Drive
Index Conveyor Drive
Starter Tray
Roll-Up Conveyor Drive
Roll-Up Conveyor Mounting
Index Conveyor Mounting
1-01
1-03
1-07
1-09
1-13
1-15
1-17
SECTION 2 – Cutting Heads
Cutting Head Assembly. Typical
Ground Roller Assembly
Lift Cam & Cut-Off Drive Assembly
Depth & Pitch Adjustment Assembly
Cutter Head Pivoting
Eccentric Shaft & Connecting Rod Assembly
Coulter Blade Assembly - Option
Cut-Off Lift Arm Assembly
Cutter Blades – Option
Brush Attachment – Option
2-01
2-03
2-05
2-07
2-09
2-11
2-13
2-15
2-17
2-19
SECTION 3 – Hydraulic System
Hydraulic System – Components
Hydraulic System – Conveyor & Cutter Head. Hose Assemblies
Hydraulic System – Conveyor & Cutter Head. Fittings
Hydraulic System – Hydraulic Tank, Pump & Filters. Hose Assemblies
Hydraulic System – Hydraulic Tank, Pump & Filters. Fittings
Hydraulic System – Rear Valves, Motors & Cylinders. Hose Assemblies
Hydraulic System – Rear Valves, Motors & Cylinders. Fittings
Hydraulic System – Robotic Arm. Hose Assemblies
Hydraulic System – Robotic Arm. Components & Fittings
Hydraulic Pump Drive
Hydraulic Pump Drive – John Deere 6105 & 6115 – Current from Serial No. 214
Hydraulic Tank Assembly
Hydraulic Valve Banks
Load Sense Amplifier Connections
Double Sided Pallet Injector Connections
Brush – Option
3-01
3-03
3-05
3-07
3-09
3-11
3-13
3-15
3-17
3-19
3-19a
3-21
3-23
3-25
3-27
3-29
SECTION 4 – Auto-Steer
Sensor Valve & Cam Mount
Hydraulic System
Spring Column, Reset Cylinder & Shoe Arm
Auto-Steer Hydraulics - John Deere 6105 & 6115
King Pin Sensor Mounting Assembly - John Deere 6105 & 6115
Spring Column, Reset Cylinder & Shoe Arm - John Deere 6105 & 6115
4-01
4-03
4-05
4-09
4-11
4-13
Continued
SECTION 5 – Electrical
Electrical System
Joystick Control Handle
Circuit Breaker Mounting
E-Stop & Enclosure Assembly
Electrical Control Box – Non Current up to Serial No. 169
Cab Electrical Harness Assembly
Electrical Control Box – Current from Serial No. 170
Wheel Encoder Mounting
5-01
5-07
5-09
5-10
5-11
5-13
5-15
5-17
SECTION 6 –Robotic Arm & Pallet Dispenser
Robotic Arm Assembly
Gripper Head Assembly
Pallet Dispenser Mounting
Pallet Dispenser Assembly
Robotic Arm Mounting
Piling Wall
Double Sided Pallet Injector Option – Rotator Assembly
Double Sided Pallet Injector Option – Piling Wall & Box
6-01
6-05
6-09
6-11
6-15
6-17
6-19
6-21
SECTION 7 – Harvester & Tractor Frame
Pallet Lift Forks Assembly
Rear Gate Assembly
7-01
7-03
SECTION 8 – Options & Accessories
Safety Decals – John Deere 6230 & 6330
Decals – John Deere 6105 & 6115
8-01
8-07
SECTION 1 – CONVEYORS
Main Conveyor Frame
Main Conveyor Drive
Roller Idler Shaft Assembly
Index Conveyor Drive
Starter Tray
Roll-Up Conveyor Drive
Roll-Up Conveyor Mounting
Index Conveyor Mounting
1-01
1-03
1-05
1-07
1-09
1-13
1-15
1-17
20
27
28
31
29
A
30
29
DETAIL A
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
CONVEYOR FRAME
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
H500127
H500100
KD90001
KD90003
R300056
R300009
H301111
H301185
H301235
H301112
H301186
H301236
H301158
F210500
F320500
H101024
H101094
H101096
F610406
F210408
H301041
A101308
A101307
F020510
F320508
F210608
F040814
F330808
KD89999
KD90000
F330608
F230608
H101246
H101742
H101743
F210808
R100607
F020524
F210512
Conveyor Mat 24 in. (224 in. Long)
Conveyor Mat 16 in. (224 in. Long)
Splice - Conveyor Mat
Mat Clip
Conveyor Frame - 24 inch
Conveyor Frame - 16 inch
Sod Guide - L.H. - 16 inch
Sod Guide - L.H. - 24 inch
Sod Guide - L.H. - 16 inch on 24 inch Conveyor
Sod Guide - R.H. - 16 inch
Sod Guide - R.H. - 24 inch
Sod Guide - R.H. - 16 inch on 24 inch Conveyor
Toe Guard
Locknut 5/16 unc
Washer 5/16
Adjuster Wedge
Slider - 92 in.
Slider. Return - 16 inch only - 45 in.
Screw 1/4 unc x 3/4. Fl. Hd. Phillips S.S.
Locknut 1/4-20 unc Gr.8
'T' Bolt
Tie Bar. 24 in.
Tie Bar. 16 in.
Carriage Bolt 5/16 unc x 1
Flat Washer 5/16 uss Gr.8
Locknut 5/16-18 Gr.8
Carriage Bolt 1/2 unc x 1 1/2
Flat Washer 1/2 sae Gr. 8
Tool. Belt Splicer. (Impact Air Powered)
Tool. Belt Splicer. Std.
Washer 3/8 Gr. 8
Hex Nut 3/8 unc Gr.8
Spacer - Sod Guide - 16 inch only
Spacer - Sod Guide - 16 inch Head in 24 inch Conveyor
Spacer - Sod Guide - 23 inch
Locknut 1/2 unc Gr.8
Wear Bar
Nut 5/16-18 Gr.5 Stover Flanged
(per mat)
(per mat)
24-Jul-13
1
1
7
128
1
1
1
1
1
1
1
1
1
2
4
2
2
2
3
3
6
1
1
2
4
8
2
2
1
1
12
6
6
6
6
2
2
2
2
1-02
13
2
56
41
41
56
19
12
30
17- 18
43 & 51
34
30
38
24
57
2
47
38
46
24
33
27
1
26
40
33 10
37
52
30
22
54
9
37
26
55
10 33
40
22
52
44
33
14
35
29
54
15
44
8
41
52
43
36
11
25
7
42
25
36
7
21
OPTIONAL
49
36 31
58
6
23
36 23
23
36
50
1-03
23
3
50
36
ITEM
NO. PART NO.
DESCRIPTION
ROBOMAX JOHN DEERE
QTY
CONVEYOR DRIVE ASSEMBLY
1
2
3
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
25
26
27
29
30
31
33
34
35
36
37
38
40
41
42
43
44
46
47
49
50
F230608
KB31024
H301033
H301009
H101024
KB32012
H301005
H301006
016640
H301117
Q0579
64164-10
KM11400
R300009
R300056
4133815
R100924
R100925
R300039
R300059
H101069
H101187
F910514
KB32016
F270808
F140502
F041014
F040620
F040614
F040406
F330708
F331008
F210408
F210608
F210708
F040820
F924413
F210808
R300063
H301117
F040714
R100922
R100923
KB32012
R100516
KD72310
KD71210
F020720
F020716
Nut 3/8 unc
Flanged Bearing 1.50 Dia.
Crown Roller - 24 in.
Crown Roller - 16 in.
Plate - Adjuster Wedge
Flange - Shaft
NOTE
Tensioner Arm L.H.
Tensioner Arm R.H.
Items 19, 30, 34, 41 & 56 are
available as - Conveyor
Idler Spring Mount
Drive
Shaft Assembly:
Roll-Up Conveyor Shaft - 24 in.
R500009
- 16 in.
Key 1/4 x 1/4 x 3 5/8
R500042
24 in.
Key 1/4 x 1/4 x 1 1/4
Grease Fitting 1/4
Main Conveyor - 16 in.
Main Conveyor - 24 in.
Sensor Bracket
Sod Guide - 24 in. L.H.
Sod Guide - 24 in. R.H.
Shaft - 16 in.
Shaft - 24 in.
Crown Roller Scraper - 16 & 18 in.
Crown Roller Scraper - 24 in.
Cotter Pin 5/32 x 1 1/2
Flanged Bearing
Jam Nut 1/2-13 Gr.2 - Nyloc
Set Screw 5/16 x 1/4
Bolt 5/8 unc x 1 1/2 Gr.8
Bolt 3/8 unc x 2 Gr.8
Bolt 1/4 unc x 3/4 Gr.8
Washer 7/16
Washer 5/8
Locknut 1/4 unc
Locknut 3/8 unc
Locknut 7/16 unc
Key 1/4 x 1/4 x 1 3/8 Lg.
Locknut 1/2 unc
Idler Shaft - 16 in.
Bolt 7/16 unc x 1 1/2 Gr.8
Flanged Bearing
Sprocket. Conveyor Tooth Count - 24 Tooth
Sprocket #40 x 23 Tooth - 16 in.
Sprocket #40 x 12 Tooth - 24 in.
11-Jun-13
1
2
1
1
2
4
1
1
2
2
1
1
2
1
1
1
1
1
1
1
1
1
2
2
8
4
2
1
4
22
4
4
18
4
10
8
1
2
1
1
4
1
1
2
1
1
1
2
4
1-04
13
2
56
41
41
56
19
12
30
17- 18
43 & 51
34
30
38
24
57
2
47
38
46
24
33
27
1
26
40
33 10
37
52
30
22
54
9
37
26
55
10 33
40
22
52
44
33
14
35
29
54
15
44
8
41
52
43
36
11
25
7
42
25
36
7
21
OPTIONAL
49
36 31
58
6
23
36 23
23
36
50
1-05
23
3
50
36
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
CONVEYOR DRIVE ASSEMBLY
51
52
54
55
56
57
58
R100613
R100614
Q8404
S2003
H301031
R100445
KD41810
R100849
R100850
Quick Link - 3/16
Spring
Feed Roller Pivot
Conveyor Sprocket Clamp Plate
Sprocket 18 Tooth
Sod Deflector - 16 in. (Optional)
Sod Deflector - 24 in. (Optional)
1
1
4
2
1
2
1
1
1
14-May-14
1-06
60
45
56 57
45
57
56
86
85
81
47
26
18
80
45
57
56
44
79
83
7
43
45
59
57
56
84
82
69
DETAIL E
47
70
71
46 34
68
66
18
47
DETAIL B
67
72
73
E
42
NON
CURRENT
55
B
77
29
30
54
D
59
37
11
36
62
25
58
C
21
16
61
50
78
37
25
49
53
41
8
52
49
51
27
48
DETAIL C
DETAIL D
5
1
15
12
36
22
28
35
47
64
64
65
25
DETAILS ON
PG 1-17
20 23
20 23
34
33
31
39
75
17
25
32
36
12
24
3
A
19 6
3
2
6
10
4
61
34
14
36
74
56
76
25
62
1-07
9
57
25 36
DETAIL A
13
76
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
INDEX CONVEYOR MOUNTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
39
41
42
43
44
45
46
47
48
49
50
016661
4128917
4128942
4129177
4129323
F815125
R300002
R300054
R300028
F040428
4138642
R300042
KE60115
4160493
R300027
R300055
4135024
4160420
F840500
4131860
F210808
4134551
F310608
F040514
F870406
F040610
F040616
F330608
G321800
F120614
4132983
F180112
F180114
4160407
F940229
KX00814
F040814
4134048
F210608
F210100
F870604
R100452
R100464
R100619
R100516
F040406
F310808
F330808
R100555
F330708
F310708
Slider T-Bolt (Qty: 8x for 24 in. Qty: 4x for 16 in.)
8
Guide Block
4
Bearing Sleeve
8
Guide Shaft
2
Slider. Index Conveyor (Qty: 4x for 24 in. Qty: 2x for 16 in.)
4
Internal Retaining Ring
8
Main Beam
1
Conveyor Mounting Frame - 24 in.
1
Conveyor Mounting Frame - 16 in.
1
1
Bracket. Bad Roll - 24 in.
1
Bracket. Bad Roll - 16 in.
1
Junction Box - 8 Port
1
Spacer
A/R
Index Conveyor - 16 in.
1
NOTE
Index Conveyor - 24 in.
1
Hose Clamp - 5/8
2
Items 18, 45, 56, 57, 59 & 79-86
Rear Cover Plate
1
are available as Chain Tensioner
Retrofit
Kit
R500201
Nut 5/16 unc - Serrated
4
Cylinder 1 1/4 x 5/8 x 8
1
Nyloc Nut 1/2 unc Gr.8
3
Caplugs - 1 x 2
4
Lockwasher 3/8
2
Bolt 5/16 unc x 1 1/2 Gr.8
4
Bolt 1/4 unc x 3/4 Wlf.
4
2
Bolt 3/8 unc x 1 3/4 Gr.8 - See Note 2
2
Flatwasher 3/8
10
Flatwasher M18
2
Screw 3/8 x 1 1/2 Flat. Hex. Hd.
4
Sensor - Inductive 8mm
1
NOTE 2
Screw 8-32 x 1 1/4 Hex. Soc.
2
The length of Item 24 varies
Screw 8-32 x 1 1/2 Hex. Soc.
1
depending on the width of cut.
Bracket. Motor Sensor
1
16 inch width of cut - 1 3/4 in.
Hitch Pin Clip 1/8 x 2 9/16
1
24 inch width of cut - 1 1/4 in.
Clevis Pin 1/2 x 1 1/2
1
4
Sensor Cable
1
Locknut 3/8 unc
14
Locknut #8-32
3
Bolt 3/8 unc x 1/2 Flanged
8
Mud Flap
1
Clamp Bar. Mud Flap
1
Bracket. Conveyor Tooth Count
1
Sprocket. Conveyor Tooth Count - 24 Tooth
1
5
Lockwasher Helical 1/2 Gr.8
4
Flatwasher 1/2 sae Gr.8
9
Right Side Frame Spacer
2
Flatwasher 7/16 Gr.8 uss
16
Lockwasher 7/16 Gr.8
4
09-Apr-14 1-08
60
45
56 57
45
57
56
86
85
81
47
26
18
80
45
57
56
44
79
83
7
43
45
59
57
56
84
82
69
DETAIL E
47
70
71
46 34
68
66
18
47
DETAIL B
67
72
73
E
42
NON
CURRENT
55
B
77
29
30
54
D
59
37
11
36
62
25
58
C
21
16
61
50
78
37
25
49
53
41
8
52
49
51
27
48
DETAIL C
DETAIL D
5
1
15
12
36
22
28
35
47
64
64
65
25
DETAILS ON
PG 1-17
20 23
20 23
34
33
31
39
75
17
25
32
36
12
24
3
A
19 6
3
2
6
10
4
61
34
14
36
74
56
76
25
62
1-07a
9
57
25 36
DETAIL A
13
76
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
INDEX CONVEYOR MOUNTING
51
52
53
54
55
56
57
58
59
60
61
62
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
F040720
F210708
F040714
R100311
F020510
F330408
F310408
F320508
F210508
4132981
R100480
F040624
A101493
KS60013
R100540
R100458
KB30018
F041024
F311008
F331008
F031024
F221000
F870606
F840600
4134550
A101171
R100395
F040512
F040824
KD11080
R101327
R101328
R300241
G0410030
G311000
Bolt 7/16 unc x 1 1/2 Gr.8
Scrap Chute
Lockwasher 1/4 unc Gr.8
Inductive Sensor 4mm
Piling Wall Spacer
Washer 18mm
Neoprene Washer 3/4 x 1.50
Conveyor Shim - Thick
Conveyor Isolator
Bearing 1 1/2 in. Pillow Block
Lockwasher 5/8 Gr.8
Washer 5/8 sae Gr.8
Bolt 5/8 unc x 2 1/2 Full Tread Gr.8
Jam Nut 5/8 unc
Bolt 3/8-16 x 3/4 Gr.5 Flanged
Nut 3/8 unc Serrated Flange
Plastic Plug
Spacer 1/8 - Non Current
Spacer 3/8 - Non Current
Bolt 5/16 unc x 1 1/4 Gr.8 - Current from Serial No. 218
Bolt 1/2 unc x 2 1/2 Gr.8 - Current from Serial No. 218
Idler Roller 2.75 Dia. - Current from Serial No. 218
Chain Tensioner Mntg. Plate - Current from S/N 218 (Retrofit Kit Only)
Rosta Modification - Current from Serial No. 218
Rosta Chain Tensioner Mount - Current from Serial No. 218
Hex Head M10 x 1.5 x 30 Lg. - Current from Serial No. 218
Lockwasher M10 - Current from Serial No. 218
4
8
8
1
4
6
6
4
5
1
4
2
2
2
2
2
2
4
4
4
4
4
2
2
2
1
1
1
1
1
1
1
1
1
1
NOTE
Items 18, 45, 56, 57, 59 & 79-86
are available as Chain Tensioner
Retrofit Kit - R500201
09-Apr-14 1-08a
NOTE
11
Items 1-32 & 57
make up the Optional
Single Starter Tray.
14
22
20 57
23
4 20 6
24
14 13 16
15
12
26
14
1
25
22
17 20
18
7
8
14
24
42
41
2
54
5
34 36
46
35
34
44
2
55
47
61
59
43
40 56
45
63
60
47 37
38
54
58 62
55
33
48
51
49
53
51
52
50
52
49
CURRENT DOUBLE STARTER TRAY
71
71
64
60
70
70
71
67
66
66
70
76
67
57
63
75
65
73
63
81
72
68
58
NON CURRENT
78
76
67
62
75
68
80
69
67
68
20
74
81
61
59
63
84
69
77
83
82
80
80
79
1-09
56
37
32
39
27
28
35
46
20
21
13
19 21
23
10
21
9
3
19
13
32 16
20 24
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
STARTER TRAY ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
32
33
35
36
37
38
39
40
41
42
43
44
45
47
48
49
50
4160255
4160260
F3748
6115859
6115860
6115857
6115858
6115825
6115826
6115892
6115891
6115861
4139954
6115862
001277
Q8402
001279
G8084
F910310
F320608
64044-2
64044-13
F050420
KM11400
F840824
F040824
99-B12
F320808
F220800
F940312
4139958
F110610
F040506
F330508
F040412
F900310
F840600
F910208
6115895
KD72406
KD71605
Q8430
R300047
001437
014204
R300046
B0105
002611
014128
64123-89
F210408
Starter Tray. 24 in - 4 Bar
Starter Tray. 16 in - 4 Bar
Bolt - Rubber Head 3/8
Offset Link Arm
Offset Link Arm
Link Arm R.H.
Link Arm L.H.
Starter Gate - 16 in. & 18 in.
Starter Gate - 24 in.
Rod. Starter Tray - 24 in.
Rod. Starter Tray - 16 in.
Stop. Starter Tray
Pivot Rod - 24 in.
Pivot Rod - 16 in.
Spring. Starter Tray
Chain. Starter Tray
Spring. Scraper Blade
Quick Link. 3/16 in.
Cotter Pin. 3/32 x 1
Washer 3/8
Set Screw 5/16
Set Screw 1/4 x 1/4
Eye Bolt 1/4 x 2 W/9/16
Grease Fitting 1/4
Nut. 1/4 Wlf.
Spacer
Washer 1/2
Jam Nut - 1/2 Nylon Insert
Pin. Spring Tension
Roll-Up Flag
Screw
Washer 5/16
Woodruff Key #608
Locknut 3/8 unc
Cotter Pin. 1/8 x 1
Roller Drive Guard
Sprocket. #40 x 24T x 3/4
Sprocket. #40 x 16T x 3/8
Chain
Roller Arm - 4 in. R.H.
4 in. Roller - 24 in.
4 in. Roller - 16 in.
Roller Arm - 4 in. L.H.
Bearing
Locknut 1/4 unc
NOTE
Items 1-32 & 57 make
up the Optional Single
Starter Tray.
NOTE 1
See Note 1 on Page 1-09 & 1-11
for Inductive Sensor (Item 57)
location on Double Starter Tray.
NOTE 2
R500104 - Kesmac
16 in. Double Starter
Tray Retrofit Kit.
4-Dec-12
1
1
7
1
1
1
1
1
1
1
1
2
1
1
1
1
3
2
1
3
2
2
2
8
3
2
2
4
2
24
1
1
5
3
4
1
4
2
1
1
1
1
1
1
1
1
2
1
1
18
18
1-10
NOTE
11
Items 1-32 & 57
make up the Optional
Single Starter Tray.
14
22
20 57
23
4 20 6
24
14 13 16
15
12
26
14
1
25
22
17 20
18
7
8
14
24
42
41
2
54
5
34 36
46
35
34
44
2
55
47
61
59
43
40 56
45
63
60
47 37
38
54
58 62
55
33
48
51
49
53
51
52
50
52
49
71
71
64
60
70
70
71
67
66
66
70
76
67
57
63
75
65
73
63
81
72
68
58
NON CURRENT
78
76
67
62
75
68
80
69
67
68
20
74
81
61
59
63
84
69
77
83
82
80
80
79
1-11
56
37
32
39
27
28
35
46
20
21
13
19 21
23
10
21
9
3
19
13
32 16
20 24
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
STARTER TRAY ASSEMBLY
51
52
53
54
55
56
57
58
59
60
61
62
63
F8001
83-053
Q0570
64262-013
F321008
F910514
A500228
KE10260
R300184
F310508
F330508
F210100
F540114
NOTE
Sprocket Plate
Items 1-32 & 57 make up the
Gear
Optional Single Starter Tray.
Key 3/16 x 3/16 x 1 1/4
Bolt 3/8 x 1 1/2 Flanged
Flatwasher 5/8 uss Gr.8
Sensor. Inductive - 8mm - Non Current up to Serial No. 192
Sensor. End of Roll - Current from Serial No. 193
Sensor Mounting Bracket
Lockwasher 5/16 unc Gr. 8
Washer 5/16 sae Gr. 8
Nyloc Nut #8-32 Gr.2 zinc
Bolt 8-32 x 1.5 Pan Hd Phil
2
2
1
4
2
2
1
1
1
2
2
2
2
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
H500076
H500206
H301080
H301188
KS60003
F040404
F310400
F940312
H101032
F040620
F040624
H101260
F210600
F330600
F230600
H301027
F230800
KS20006
H301081
H301082
F040824
F270800
H101285
H101606
F110606
H101070
H101194
F330800
F940215
H301019
H301052
KS20005
KM11400
Double Starter Gate Assembly. 16 & 18 in.
Double Starter Gate Assembly. 24 in.
Double Starter Tray. 16 & 18in.
NOTE 2
Double Starter Tray. 24 in.
Bumper
R500104 - Kesmac
Lockwasher 1/4
Tray Retrofit Kit.
Spring Pin
Hanger Strap
NOTE 2
Sleeve - Hanger Strap
R500104 - Kesmac
Locknut 3/8 unc
Washer 3/8 sae
Tray Retrofit Kit.
Nut 3/8 unc
Suspender Adjuster
Nut 1/2 unc
Spring Tension
Starter Tray Link - LH
Starter Tray Link - RH
Nut 1/2 unc Nyloc Jam Gr.2
Shaft - Second Starter Gate. 16 & 18 in.
Shaft - Second Starter Gate. 24 in.
Set Screw 3/8 unc x 3/4 Sq. Hd. Cup Pt.
Shaft - Starter Gate. 16 & 18 in.
Shaft - Starter Gate. 24 in.
NOTE 3
Washer 1/2 sae (See Note)
Hitch Pin
Fit one washer, Item 23, to
Starter Gate. 16 & 18 in.
the inside of the Link boss.
Starter Gate. 24 in.
Fit washers as required on
the outside of the Link boss.
Spring Tension
Grease Fitting
7-Jan-13
1
1
8
8
8
20
3
5
1
6
8
6
2
3
6
1
1
1
2
2
1
1
4
1
1
A/R
2
2
2
1
8
1-12
10
27
12
13
9
1
27
1
1
16
16
21
21
SEE NOTE
27
16
43
13
5
2
20
27
42
16
40
41
11
20
1
2
44
16
1
13
16 1
1
1
5
12
27
1
16
20
20
13
4
1
1
27
1
15
21
21
21
15
34
22
49
25
34
45
48
22
22
18
33
32
29
25
23
22
22
26
6
20 18
21
23
30
14
3
7
39
36
19
19 24
24
31
8
1-13
46
22
20
35
28
18
17 23
47
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
ROLL-UP CONVEYOR DRIVE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
001348
R500068
F140503
001375
R100457
R100314
016720
R100259
Q0579
KM11400
41-047
4129654
R100260
4134808
R100743
4134809
R100589
001465
KR15017
F230200
F040822
F040714
F040604
F330708
F330608
F320808
F924410
F924420
F210608
F210707
F210808
F040610
KD71410
KD71610
B0121
KD71210
KD72310
KD71610
KD80036
KD80038
D2902
F924413
KH30007
55-FB23016
Q8430
Q8430
81-056
81-076
83-P116
Gear (Includes Item 2 - Set Screw) - Non Current
Roll-Up Sprocket Assembly - Current
NOTE
Idler Arm. Roll-Up Drive
Driveshaft. Roll-Up - 24 in.
Item 1 is Non Current and
Driveshaft. Roll-Up - 16 in.
is replaced by Roll-Up
Shaft. Idler - 24 in.
Sprocket Assembly
Shaft. Idler - 16 in.
R500068 which include
Items 40, 41, 42, 43 & 44.
Key 1/4 x 1/4 x 3 5/8
Grease Fitting 1/4
Spring
Shaft. Vertical Drive - 24 in.
Shaft. Vertical Drive - 16 in.
Mintex Belt 18 in. (Includes Items 12 & 13) - 24 in.
Conector - 18 in Mintex - 24 in.
Conector - 15 in Mintex - 16 in.
Nut #10-24 unc
Bolt 7/16 unc x 1 1/2 Gr.8
Washer 7/16
Washer 3/8
Flatwasher 1/2
Key 1/4 x 1/4 x 1
Key 1/4 x 1/4 x 2
Locknut 3/8 unc
Locknut 7/16 unc
Locknut 1/2 unc
Sprocket #40 - 14 Tooth - 24 in.
Sprocket #40 - 16 Tooth - 16 in.
Bearing - 2 Bolt Flange
Driveshaft. Sprocket - 12 Tooth - 24 in.
Driveshaft. Sprocket - 23 Tooth - 16 in.
Sprocket #40 - 16 Tooth - 24 in. & 16 in.
Roll-Up Sprocket - 36 Tooth - 24 in.
Roll-Up Sprocket - 38 Tooth - 16 in.
Belt Idler Sheave
Key 1/4 x 1/4 x 1 3/8 Lg.
Motor
Bearing - 2 Bolt Flange
Chain. Cut-Off Length 24 in.
Chain. Cut-Off Length 51.6 in.
Link. Connector #40
Half Link #40
Bushing
11-Jun-13
12
12
24
1
1
1
2
2
1
1
1
1
1
1
1
1
1
2
2
6
1
4
12
2
6
6
8
7
16
4
2
8
1
1
6
1
1
1
1
1
1
1
1
2
2
1
2
2
1
1-14
10
27
12
13
9
1
27
1
1
16
16
21
21
SEE NOTE
27
16
43
13
5
2
20
27
42
16
40
41
11
20
1
2
44
16
1
13
16 1
1
1
5
12
27
1
16
20
20
13
4
1
1
27
1
15
21
21
21
15
34
22
49
25
34
45
48
22
22
18
33
32
29
25
23
22
22
26
6
20 18
21
23
30
14
3
7
39
36
19
19 24
24
31
8
1-13a
46
22
20
35
28
18
17 23
47
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
ROLL-UP CONVEYOR DRIVE
40
41
42
43
44
45
46
47
48
49
R100621
R100622
R100623
F040416
F210400
KH30007
Q8432
KD41810
KD42110
F320608
Roll-Up Sprocket
Roll-Up Sprocket Plate
Roll-Up Sprocket Hub
Nut 1/4 unc Nyloc
Motor - Conveyor Drive
Chain - 34 1/4 in.
Conveyor Drive Sprocket - 18 Tooth
Sprocket - 21 Tooth
Flatwasher 3/8 Gr.8
NOTE
Item 1 is Non Current and
is replaced by Roll-Up
Sprocket Assembly
R500068 which include
Items 40, 41, 42, 43 & 44.
1
1
1
5
5
1
1
1
1
4
24-Jul-13 1-14a
30
18
49
16
37
47
48
9
5
8
2
8
50
CURRENT
46
40
42
40
44
43
45
44
NON
CURRENT
17
17
43 44
17
41
19
12
23
21
17
17
26
15
1
7
7
10
11
25
21
38
20
20
35
33
39
1-15
32
6
38
25
32
5
1
6
14
2
13
23
17
3
3
26
24
3
2
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
ROLL-UP CONVEYOR MOUNTING
1
2
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
25
26
30
32
33
35
37
38
39
40
41
42
43
44
45
46
47
48
49
50
F500503
KS20002
002102
H101281
016961
05-041
KM11400
R300034
4129625
4129779
4129787
R300148
4133690
R300147
R100258
R300154
4133869
R300153
R300033
R300207
R300060
4134758
4134811
F230558
F230608
F040410
F040610
F040832
F840410
F210408
F210608
F210808
F050644
G8084
G8115
F910624
S2003
F840400
F910112
4136095
4136092
F040632
F320608
F210608
F040650
F850610
F040506
F210500
H301069
KC01002
Shoulder Bolt - 5/16 x 3/8
Spring. (001279 - Spring. Scraper Blade - Non Current)
Eyebolt. Starter Tray - Non Current
Chain (Q8402 - Chain. Starter Gate - Non Current)
Shim - 26 FA x 1 x 3 1/2
Bumper
Grease Fitting 1/4
Roll-Up Tray Reinf. Brkt. - 16 in.
Roll-Up Tray Reinf. Brkt. - 24 in.
Angle. Roll-Up
Angle. Roll-Up
S-Bar - 24 in.
S-Bar - 24 in. - Obsolete
S-Bar - 16 in.
S-Bar - 16 in. - Obsolete
Roll-Up Tray - 24 in.
Roll-Up Tray - 24 in. - Non Current
Roll-Up Tray - 16 in.
Roll-Up Tray - 16 in. - Non Current
Roll-Up Chain Guard - Large Sprocket - Current
Roll-Up Chain Guard - Non Current
Roll-Up Guard
Quick Link 5/16
Nut 5/8 unc - Non Current
Nut 3/8 unc
Bolt 1/4 unc x 1 Gr.8 - Non Current
Bolt 1/4 x 1 Flanged
Locknut 1/4 unc
Locknut 3/8 unc
Locknut 1/2 unc
Eye Bolt
Quick Link 3/16 - Non Current
Handle
Spring. Extension
Nut 1/4 - Wlf.
Cotter - Hairpin
Bracket. End of Roll
Flap. End of Roll
Washer 3/8
Locknut 3/8 unc
Bolt 3/8 x 1. Flanged
Locknut 5/16 unc
Spring Hook
Shackle
4
2
4
1
2
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
2
4
4
4
3
4
4
4
1
2
1
1
1
4
2
2
1
1
2
4
1
2
2
2
1
1
07-May-14
1-16
24
22
23
26
31
34
22
26
23
30
24
2
30
34
31
50
19
11
24 21
21
27
18 14
8
22
21
36
18
29
33
53
35
32
22
31 16
24
40
38
12
15
52
40
25
24
22
40
10
1
31
38
16
40
23
9
34
24
31
3
26
4 15
4
12
54
30
51
28
26
26
13
6
31
26
30
56
15
34
23
7
55
43
39
5
20
24
31
22
41
37
37
41
17
37
37
BELT FASTENING DETAIL
1-17
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
INDEX CONVEYOR DRIVE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
43
44
4137005
R100451
4136960
R300057
CM00121
CM00122
4129322
R100739
4136926
R300058
4131919
R100898
4131924
F221218
R100446
F440600
4133218
4133515
4134059
4134399
4134452
4128942
F040414
F040503
F030620
F041224
F320600
F040614
F040410
F210608
F924420
F210408
F230608
F211258
F040610
KD20001
B0121
KD71510
KD72810
A100761
G8019
KH30007
G8008
4135600
F221250
F140403
F330408
4140214
R100897
4140215
Shaft. Index Conveyor Drive - 24 inch
Shaft. Index Conveyor Drive - 16 inch
Front Idler - 24 in.
Front Idler - 16 in.
Rod End 3/4 in.
Rod End 3/4 in. L.H.
Belt. 24 in. - Index Conveyor
Belt. 16 in. - Index Conveyor
Rear Idler - 24 in.
Rear Idler - 16 in.
Cleats - 24 inch
Cleats - 16 inch
Chain. Index Conveyor
Jam Nut 3/4 L.H.
Linkage - Tie
Nut 3/8 unc Flange
Tension Arm Idler
Cleats
Sensor Flag
Spacer
Bearing Sleeve - 1 1/2 in. - Non Current up to Serial No. 180
Bearing Sleeve - 1 in. - Current from Serial No. 181
NOTE 1
Bolt 3/8 unc x 2 Full Thread
16 inch Index Conveyor
Belt Assembly R500057
Washer 3/8
includes items; 5, 7, 13,
37, 41, 42, 43 & 44.
Nut 3/8 unc Nyloc
Key 1/4 x 1/4 x 2
Locknut 1/4 unc
Nut 3/8 unc Gr.8 Hex (Only used on 16in.)
Locknut 3/4 unc
NOTE 2
Gear
Bearing 1 in. 2 Bolt Flange
Items 12 & 16 are
Sprocket #40 x 15 Tooth
available as Sprocket #40 x 28 Tooth
Tension Idler Arm
Sprocket Clamp Plate
Assembly - R500100.
Key. Woodruff 1/4 in. x 1 in.
Motor
Mat Splicer (Qty:7x for 24 in. Qty: 4x for 16 in.)
Sprocket. 10 Tooth
Jam Nut 3/4 unc
Set Screw 1/4 x 3/8
Washer 1/4 sae Gr.8
Metal Strip - Cleat - 24 inch
Metal Strip - Cleat - 16 inch
Metal Strip - Cleat
22-Jan-14
1
1
1
1
2
2
1
1
1
1
16
16
1
2
2
2
2
16
1
6
2
2
96
2
1
2
16
8
36
12
2
132
6
2
4
4
6
1
1
4
1
1
A/R
2
2
4
96
16
16
16
1-18
24
22
23
26
31
34
22
26
23
30
24
2
30
34
31
50
19
11
24 21
21
27
18 14
8
22
21
36
18
29
33
53
35
32
22
31 16
24
40
38
12
15
52
40
25
24
22
40
10
1
31
38
16
40
23
9
34
24
31
3
26
4 15
4
12
54
30
51
28
26
26
13
6
31
26
30
56
15
34
23
7
55
43
39
5
20
24
31
22
41
37
37
41
17
37
37
BELT FASTENING DETAIL
1-19
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
INDEX CONVEYOR DRIVE
50
51
52
53
54
55
56
R300062
R300061
F040616
F924412
F310608
R101132
R101131
F331208
F311200
Sod Guide - 24 in.
Sod Guide - 16 in.
Key 1/4 x 1/4 x 1 1/4
Lockwasher 3/8 Gr.8
Idler Arm Tie Bar - 24 in.
Idler Arm Tie Bar - 16 in.
Washer 3/4 sae Gr.8
Lockwasher 3/4
2
2
4
1
4
1
1
2
2
22-Jan-14
1-20
SECTION 2
CUTTING HEADS
Cutting Head Assembly. Typical
Ground Roller Assembly
Cut-Off Drive Assembly
Depth & Pitch Adjustment Assembly
Cutter Head Pivoting
Eccentric Shaft & Connecting Rod Assembly
Coulter Blade Assembly – Option
Cut-Off Lift Arm Assembly
Cutter Blades – Options
Brush Attachment – Option
2-01
2-03
2-05
2-07
2-09
2-11
2-13
2-15
2-17
2-19
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
CUTTING HEAD ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
F210808
KH30056
21091
KH70090
F020824
F050620
KD22075
KD33800
B100717
KD52010
KD61121
KD62401
F020830
F220800
H300200
H300242
H300246
H300201
H300243
H300247
H300055
H500022
KS50001
F080714
F210750
F020814
H300178
H300179
H500200
H100027
F211650
H300261
H300262
H300176
H300177
H301151
H301167
H100546
F230600
F210600
F320600
F120614
F310808
F230800
F050408
F040810
F310400
F320400
H100197
F040812
Locknut 1/2 unc
Cutter Motor - Current from Serial No. 205
Cutter Motor - Non Current up to Serial No. 204
Seal Kit. Cutter Motor (for 21091 Cutter Motor)
Carriage Bolt 1/2 unc x 2 1/2 - Non Current up to Serial No. 204
Bolt 3/8 unc x 2 Bent Eye
75 Tooth Sprocket - Motor Shaft - Current from Serial No. 205
Sheave, Triple Groove, Taper Lock - Non Current up to Serial No. 204
Taper Lock Bushing - Current from Serial No. 205
Taper Lock Bushing - Non Current up to Serial No. 204
Cutter Motor Polychain Belt - Current from Serial No. 205
Drive Belt. Triple "V" Groove - Non Current up to Serial No. 204
Jam Nut 1/2 unc
Cutter Arm. LH. (10 in. Ground Roller - Long Option)
Cutter Arm. LH. (10 in. Ground Roller - Short Option)
Cutter Arm. LH. (10 in. Ground Roller - Reduced Pitch)
Cutter Arm. RH. (10 in. Ground Roller - Long Option)
Cutter Arm. RH. (10 in. Ground Roller - Short Option)
Cutter Arm. RH. (10 in. Ground Roller - Reduced Pitch)
Tie Bolt (Connecting Rod)
Cutter Arm - Top Pivot
Available as Assembly No.
Isolator - Cutter Arm
H500022
Bolt 7/16 unf x 1 1/2 Gr.8
Locknut 7/16 unf
Head Pivot & Cam Mount Bracket 16in.
Head Pivot & Cam Mount Bracket 24in
Cutting Blade Bolt Assembly
Bushing Spacer
Locknut 1 unf
Cutter Head Frame. 16 inch - Current from Serial No. 205
Cutter Head Frame. 24 inch - Current from Serial No. 205
Cutter Head Frame. 16 inch - Non Current up to Serial No. 204
Cutter Head Frame. 24 inch - Non Current up to Serial No. 204
Pivoting Head Hub Frame 16in.
Pivoting Head Hub Frame 24in
Blade Bumper.
Nut 3/8 unc
Locknut 3/8 unc
Flatwasher 3/8
Bolt 3/8 unc x 1 1/2 FL HD SOC
Lockwasher 1/2 Gr.8
Nut 1/2 unc
Lockwasher 1/4
Flatwasher 1/4
Belt Guard
07-May-14
16
1
1
1
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
6
6
10
1
1
6
2
1
1
1
1
1
1
1
1
4
3
2
1
21
6
4
4
4
4
1
3
2-02
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
CUTTING HEAD ASSEMBLY
39
40
41
42
43
44
45
46
47
F330808
H300192
F040610
H100100
KS20004
F040624
F180820
F020816
B100239
Washer 1/2 in.
Centering Spring Mount
Cut-Off Spring RH
Centering Spring LH
Bolt 3/8 unc x 2 1/2 Gr.8 Full Thread
Bolt 1/2 unc x 2 LG. SOC HD CAP - Current from Serial No. 205
Carriage Bolt 1/2 unc x 1 3/4 - Current from Serial No. 205
Cutter Motor Mount Plate - Current from Serial No. 205
6
1
2
1
1
1
4
4
1
07-May-14 2-02a
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
GROUND ROLLER ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
H300170
H300171
A300293
A300300
H300238
A300295
KB32020
F081016
F311000
F231050
H310213
H300215
F040610
F320600
F310600
H300029
KM10051
F020820
F330808
F310800
F230800
KM30019
H100559
Bracket - Ground Roller 16in.
Bracket - Ground Roller 24in.
Ground Roller 16 in.
Flanged Bearing
Bolt 5/8 unf x 1 3/4 Gr.8
Lockwasher 5/8
Nut 5/8 unf
Boss Scraper 16 in.
Boss Scraper 24 in.
Washer 3/8
Lockwasher 3/8
Adjuster
Lockcollar
Bolt 1/2 unc x 2 Carriage
Washer 1/2 S.A.E. Gr.8
Lockwasher 1/2
Nut 1/2 unc
Plug
Shim. Ground Roller Bracket
1
1
1
1
1
1
2
4
4
4
1
1
2
2
2
2
2
4
4
4
4
16
A/R
2-04
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
LIFT CAM & CUT-OFF DRIVE ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
A300249
A300258
A101120
KD42210
A101133
A101141
H300178
H300179
KH30027
KH70091
KD41210
KB32016
F081012
F231050
F311000
F924420
F040406
F310400
F320400
F040614
F310600
F210600
F040816
F210800
Q8432
KD41000
A300208
Lift Cam. 16 inch.
Lift Cam. 24 inch.
Motor Mount
Sprocket - 22 Tooth. #50 Chain
Proximity Sensor Mount
Motor Guard
Head Pivot & Cam Mount Bracket. 16 inch.
Head Pivot & Cam Mount Bracket. 24 inch.
Hydraulic Motor
Seal Kit. Hydraulic Motor
Sprocket - 12 Tooth. #50 Chain
Flanged Bearing
Nut 5/8 unf
Lockwasher 5/8
Key 1/4 x 1/4 x 2
Lockwasher 1/4
Flatwasher 1/4
Lockwasher 3/8
Locknut 3/8 unc
Locknut 1/2 unc
Chain # 50. Kit c/w connecting link 10ft. (See note)
Connecting Link
Cut-Off Proximity Target
1
1
1
1
1
1
1
1
1
1
1
2
4
4
4
1
4
4
4
2
2
2
2
2
1
1
1
2-06
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
DEPTH ADJUSTER ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
H300008
H300032
H300007
H300033
H100028
H100029
F020640
F210600
KS50001
F080714
F210750
H500022
H100027
F211650
H500199
KH70067
F040820
F210800
F041650
F231600
H100009
KM11400
4-4-070120
H300028
F660406
H500001
H100129
Pitch Adjuster Bracket. 16 inch (shown)
Pitch Adjuster Bracket. 24 inch
Cutter Top Pivot. 16 inch (shown)
Cutter Top Pivot. 24 inch
Bearing Set
Clamp Plate
Bolt 3/8 unc x 4 Carriage Lg.
Locknut 3/8 unc
Isolator - Cutter Arm
Bolt 7/16 unf x 1 1/2 Gr.8
Locknut 7/16 unf
Cutter Arm - Top Pivot
Bushing Spacer
Locknut 1 unf
Cylinder - Depth Control Ass'y.
Seal Kit. Cylinder - Depth Control
Locknut 1/2 unc
Bolt 1 x 5 unc GR. 8
Locknut 1 unc (Thin)
Bushing - Cylinder
Grease Fitting
Fitting - Straight Thread 'O' Ring Connector
Depth Indicator Pointer
Set Screws 1/2 UNC x 0.38 lg
Cylinder - Depth Control
Restrictor - Depth Control Cyl.
1
1
1
1
2
2
8
8
2
6
6
2
4
2
1
1
1
1
1
1
2
1
2
1
1
1
1
2-08
17
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
CUTTER HEAD PIVOTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
H301151
H301167
F210800
F020814
F211650
KB12136
F321600
H301222
KX20016
KX20017
KX20018
KX20019
KX20008
KX20002
KX20003
KX20004
KB90014
KM11302
Pivoting Head Hub Frame 16 inch.
Pivoting Head Hub Frame 24 inch.
Locknut 1/2 unc
NOTE
Locknut 1 unc
See Page 2-01 for the Floating
Cam Follower 2.50 O.D.
Cutter Head Assembly.
Washer 1 in.
Cam Follower Plate
Outer Cone. Taper Roller Bearing
Available as Roller Bearing
Outer Cup. Taper Roller Bearing
KX20007
Inner Cone. Taper Roller Bearing
Available as Roller Bearing
Inner Cup. Taper Roller Bearing
KX20006
Flatwasher 1 1/4
Nut 1 1/4. Slotted
Cotter Pin
Dust Cap
Seal
Grease Fitting
16-Sep-13
1
1
3
3
1
1
A/R
1
1
1
1
1
1
1
1
1
1
1
2-10
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
ECCENTRIC SHAFT & CONNECTING ROD ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
H100588
H100628
H100590
KD22041
KD33450
KD52050
KD52020
KB32033
G0818060
G211850
H500269
KB23010
KB90012
KX20036
H100592
KX20037
F910514
KB51812
KB12031
KB42031
H100245
KH80011
H300055
H100246
G311800
KX90021
Crankshaft. 16 in.
Crankshaft. 21 in.
Crankshaft. 24 in.
41 Tooth Sprocket - Crank Shaft - Current from Serial No. 205
Sheave. Triple Groove. Taper Lock - Non Current up to Serial No. 204
Taper Lock Bushing 2.00 - Current from Serial No. 205
Taper Lock Bushing - Non Current up to Serial No. 204
Flanged Bearing. 2.0 in. Dia.
Bolt. M18 x 60 Gr.10.9 (Metric)
Locknut. M18 x 1.5 (Metric)
Connecting Rod. c/w Bearing Cups
per machine
Tapered Roller Bearing
Seal
Nut. Slotted 3/4 in. - 16
Washer
Dust Cap
Cotter Pin. 5/32 x 1 1/2
Bearing. Needle Roller
Thrust Washer. 1.25 ID.x 1.937 OD. X 0.094
Thrust Bearing. Needle Roller 1.25 ID x 1.937 OD. X 0.078
Axle. Needle Roller Bearing
Seal. Connecting Rod Bearings
Tie Bolt. Connecting Rod
Nut. Special - Retainer
Lockwasher. M18 (Metric)
Grease Fitting 90 deg Elbow
1
1
1
1
1
1
1
2
4
4
2
2
1
1
1
1
1
2
4
2
2
2
1
1
4
2
NOTE
H500307 - Service Kit for
Connecting Rod Assembly:
Items: 8, 9, 10, 11, 12, 13, 14, 15,
16 & 18.
H500270 - Connecting Rod Assy.
Items: 7, 8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20 & 22.
07-May-14
2-12
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
COULTER BLADE ASSEMBLY
1
2
3
4
5
5
6
7
8
9
10
11
12
13
14
15
16
H500200
H100343
KR00017
KR00016
F040722
H300205
H300244
H300220
H300206
H300245
H300221
H100229
KR16011
KR16012
KR18011
KR18012
KR24011
KR24012
H100226
H100227
F470610
F310600
F230600
H300167
H300258
H300169
H100240
H100108
H100622
H300213
H300215
Cutter Blade Bolt Assembly
NOTE
Spacer Boss
Circular groove in Cutter Arm
Coulter Blade - Set. 11 in. dia.
indicates 5deg. Offset
Coulter Blade - Set. 12 in. dia.
Bolt 7/16 UNC x 2 1/4 GR. 8
Cutter Arm, L.H. (10 in. Ground Roller - Short Option)
Cutter Arm, L.H. (10 in. Ground Roller - Long Option)
Side Arm, R.H. (Coulter) With 5deg. Offset
Cutter Arm, R.H. (10 in. Ground Roller - Short Option)
Cutter Arm, R.H. (10 in. Ground Roller - Long Option)
Side Arm, R.H. (Coulter) With 5deg. Offset
Centre Finger
Sod Cutter Bottom Blade 3/16 x 16
Options
Sod Cutter Bottom Blade H.D. 1/4 x 16
See Page 2-18
Holder 3-Piece Blade L.H.
Holder 3-Piece Blade R.H.
Plow Bolt 3/8 UNC x 1
Lockwasher 3/8
Nut 3/8 UNC
Spacer. Side Blade
Coulter Spacer Disc. (See Note 1)
Coulter Spacer Disc. 10 in. Roller (See Note 1)
Roller Scraper. 16 in. - 10 in. Roller
Roller Scraper. 24 in. - 10 in. Roller
3
16
2
2
16
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
5
5
1
1
1
2
2
2
1
1
NOTE 1
The Coulter Spacer Disc is fitted in place of the
Spacer Bosses when operating in stoney, gravel,
sandy conditions.
2-14
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
CUT-OFF LIFT ARM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
H300042
H300047
H300203
H300202
KM11040
F040510
F210500
H100100
H300022
F331008
F211000
F221000
KS60001
F310600
F320600
F230600
KB12127
F040824
F210800
H100054
H100167
F110606
H300016
H300038
H100469
H100470
H300211
KR16001
KR16002
KR24001
KR24002
H100110
H100169
KS20002
H100294
H100511
F020612
F381013
H100568
H100569
H100009
F320500
F310500
F210500
F040510
Front Frame. 16 in. Cut Off
Front Frame. 24 in. Cut Off
Cut Off Arm. R.H.
Cut Off Arm. L.H.
Grease Fitting
Bolt 5/16 uunc x 1 Gr.8
Locknut 5/16 unc
Cut-off Spring
Spring Tension Adjuster
Washer 5/8 Gr.8
Locknut 5/8 unc
Jam Nut 5/8 unc
Rebound Bumper
Lockwasher 3/8
Washer 3/8
Nut 3/8 unc
Cam Follower
Locknut 1/2 unc
Pivot Shaft 16 in.
Pivot Shaft 24 in.
Screw 3/8 unc x 3/4. Sq. Hd. Cup PT. Set
Cut-off Blade Holder 16 & 18 in.
Cut-off Blade Holder 24 in.
Blade Holder 16 in.
Blade Holder 24 in.
Pivot Pin
Cut-off Blade 16in. Straight
Cut-off Blade 16 in.Serrated
Cut-off Blade 24 in.Straight
Cut-off Blade 24 in.Serrated
Blade Clamp 16 in.
Blade Clamp 24 in.
Spring
Drop Chain
Spacer. Cut-off Frame
Bolt 3/8 x 1 1/4. Carriage.
Shim Washer 1 in.
Shim Washer. Thick
Shim Washer. Thin
Flanged Bushing
Flatwasher 5/16
Lockwasher 5/16
Locknut 5/16-18 unc
Bolt 5/16-18 unc x 1 Gr.8
1
1
1
1
1
2
2
4
2
4
2
2
2
15
15
15
1
1
1
1
1
2
1
1
1
1
2
1
1
1
1
1
1
2
2
2
9
2
A/R
A/R
4
16
8
8
8
2-16
3
4
7
1
5
8
6
5
18
13
18
12
28
33
5
12
29
29
33
20
12
28
17
30
41
Optional
Finger Type
Sweeper
40
26
2-19
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
BRUSH ATTACHMENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
H300248
KB11224
F020614
F310608
F210608
H100316
KC01005
H300250
H300062
H300061
F040510
F320508
F040612
F210508
H300068
H300079
KB33012
F320608
F041244
KM11400
KD11044
F923312
KD10016
KD11070
F924412
KW88200
F040506
F310508
F020610
H300069
KH30014
KH70054
F040606
F240500
F221208
H300074
H300070
H100306
F321208
KX30319
H300254
M5106
M5106
Sweeper Pivot Mount 16 & 18in. ( H300249 - 24in. )
Bushing Flanged 0.75 ID x 1.00 x 1.50 lg
Bolt Carriage 3/8 UNC x 1.50
Lockwasher 3/8 Gr.8
Nut 3/8 UNC Nyloc Gr.8
Safety Chain
Screw Pin Shackle - 5/16
Brush Pivot Mount 16 & 18in. ( H300251 - 24in. )
Sweeper Brush Mount 16 & 18in. ( H300080 - 24 in. )
Brush Tilt Shaft 16 & 18in. ( H300081 - 24in. )
Bolt 5/16 UNC x 1 Gr.8
Washer 5/16 Gr.8 USS Flat Struc.
Bolt 3/8 UNC x 1.25 Gr.8
Sweeper Brush. 16 & 18in.
Sweeper Brush. 24 in.
Flanged Bearing 0.75 Dia. 3 Bolt
Washer 3/8 Gr.8 USS Flat Struc.
Grease Fitting
Sheave - Pressed Steel 0.75 Bore
Key 3/16 x 3/16 x 1.25
'V' Belt
Sheave 6.00 PDA x 1.00 Bore
Key 1/4 x 1/4 x 1.25
Wheel Assembly c/w Wheel KW88100 & Bushings KB88100
Bolt 5/16 x 3/4 Gr.8
Lockwasher 5/16 UNC Gr.8
Carriage Bolt 3/8 UNC x 1.00
Castor Bracket
Brush Kit Motor
Seal Kit. Brush Kit Motor
Bolt 3/8 UNC x 3/4 Gr.8
Clip Nut 5/16
Jam Nut 3/4 UNC Gr.8
Sweeper Belt Cover
Castor Pivot
Castor Pivot Spacer
Washer 3/4 Gr.8 USS Flat
Linch Pin
Finger Brush Shaft 16 & 18in. ( H300255 - 24in. )
Sweeper Fingers 16 & 18in.
Sweeper Fingers 24in.
1
2
8
12
19
1
2
1
1
1
1
4
2
1
1
1
2
6
1
1
1
1
1
1
1
1
3
3
9
1
1
1
4
3
1
1
1
6
3
1
1
24
32
7-Mar-12
2-20
SECTION 3
HYDRAULIC SYSTEM
Current from Serial Number 214
Hydraulic System – Components
Hydraulic System – Conveyor & Cutter Head. Hose Assemblies
Hydraulic System – Conveyor & Cutter Head. Fittings
Hydraulic System – Hydraulic Tank, Pump & Filters. Hose Assemblies
Hydraulic System – Hydraulic Tank, Pump & Filters. Fittings
Hydraulic System – Rear Valves, Motors & Cylinders. Hose Assemblies
Hydraulic System – Rear Valves, Motors & Cylinders. Fittings
Hydraulic System – Robotic Arm. Hose Assemblies
Hydraulic System – Robotic Arm. Components & Fittings
Hydraulic Pump Drive
Hydraulic Pump Drive. John Deere 6105 & 6115 – Current from serial No. 214
Hydraulic Tank Assembly
Hydraulic Valve Banks
Load Sense Amplifier Connections
Double Sided Pallet Injector Connections
Brush – Option
3-01
3-03
3-05
3-07
3-09
3-11
3-13
3-15
3-17
3-19
3-19a
3-21
3-23
3-25
3-27
3-29
25
13
SHAFT
PRESSURE SWITCH
18
PALLET LIFT
CYL. L.H.
PALLET LIFT
CYL. R.H.
GATE CYL.
19
INDEX
CONVEYOR
MOTOR
17
PALLET
DROP
CYL.
18
26
16
16
BAD ROLL
EJECT CYL.
PALLET
ROTATE
PALLET
LOAD
CYL.
4&5
BANK
14
‘TO’
PORT
5 BANK
AUX. A
PUMP
7 BANK
CONTROL
VALVES
SEE PG 3-15
5 4 3 2
LX
6
P
1
T
P
LS
LOAD
SENSE
7
15
LS
P
1
4 3 2
TO
T
20
A
B
P
1
T
T
B
LS
LS
TO
27
30
CONVEYOR
MOTOR
28
TRACTOR HYDRAULICS
13
LS
P
III
II
ROLL-UP
MOTOR
I
POWER
BEYOND
T
13
TRACTOR RETURN
29
24
23
LIFT
CYL.
SOLENOID
CHECK
VALVE
12
P
11
A
CUTTER
MOTOR
B
TO 7-BANK
PVG VALVES
PAGE 3-15
DEPTH CYL.
10
MAIN
PUMP
T
8
SOLENOID
RELIEF
VALVE
31
CUT-OFF
MOTOR
LS
P
LS
2
3
1
9
4
LOAD
SENSE
AMPLIFIER
ARM
PUMP
3
COOLER
3-01
5
FILTER
1
2
OIL TANK
21
22
NOTE
HYDRAULIC SYSTEM COMPONENTS
CURRENT FROM SERIAL # 179.
FOR NON CURRENT ITEMS
SEE PAGES: 3-03 TO 3-06,
3-11 TO 3-14, 3-25 & 3-26
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere Hydraulic System
Components - Current from Serial Number 179
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
KH40058
KH40059
KH40050
KH30029
KH70092
KH30043
KH70093
KH20217
H500199
KH70067
KH30013
KH70090
KH30027
R500020
R100569
KH20200
KH20201
KH20202
KH30007
KH70054
4131860
17
KH20218
4132569
4160105
4160565
18
4134118
19
4133657
20
21
22
23
24
25
26
27
28
29
30
KH20219
KH40068
KH40069
KH20212
KH20196
KH20211
4134283
H5019
H5020
H500001
KH20119
KH20233
KH20199
KH20197
KH20198
KH20125
31
Return Filter Assembly
Filter Element
NOTE
Oil Cooler
Hydraulic System Components
Main Pump
Current from Serial # 179.
Seal Kit. Main Pump
For Non Current Items
Hydraulic Pump
SEE PAGES: 3-03 to 3-06,
Seal Kit. Hydraulic Pump
3-11 to 3-14, 3-25 & 3-26
1 Bank Valve Block
Depth Control Cylinder Assembly
Seal Kit. Depth Control Cylinder
Hydraulic Motor. - Cutter Heads
Seal Kit. Hydraulic Motor. - Cutter Heads
Hydraulic Motor. - Cut-Off
Head Lift Cylinder
Seal Kit. Head Lift Cylinder
Lift Cylinder Circuit Tube
Solenoid Relief Valve Body
Solenoid Relief Valve Coil
Solenoid Relief Valve Spool
Hydraulic Motor - Main Conveyor, Roll-Up & Index Conveyor
Seal Kit. Hydraulic Motor - Conveyors
Cylinder - Bad Roll Eject
Seal Kit. Cylinder - Bad Roll Eject
5-Bank Valve Block
Cylinder - Pallet Lift L.H. & R.H.
Seal Kit. - Pallet Lift Cylinder
Cylinder - Gate
Seal Kit. - Gate Cylinder
Cylinder - Pallet Load & Drop
Seal Kit. - Pallet Load & Drop Cylinder
Hydraulic Motor. - Pallet Rotate
Seal Kit. Hydraulic Motor. - Pallet Rotate
4-Bank Valve Block
Breather Basket
Breather Trap
NOTE
Solenoid Check Valve Assembly
Non Current Items are Replaced
Check Valve - In-Line
by Roll Eject Field Kit R500105.
Cross Over Relief Valve
For Field Kit Items SEE PAGES:
Pressure Switch
3-04 & 3-06.
In-Line Filter Assembly
In-Line Filter Element
Cylinder - Depth Control
Directional Control Valve - Current from Serial # 179
Valve Body - Current from Serial # 179
Solenoid Valve Body - Non Current to Serial # 178
Solenoid Valve Spool - Non Current to Serial # 178
Solenoid Valve Coil - Non Current to Serial # 178
Load Sense Amplifier
26-Apr-12
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3-02
From 5-Bank Valve Block ‘T’ Port
From 1-Bank Valve Block
From 5-Bank Valve
Block ‘B’ Port
25
29
CONVEYOR
MOTOR
27
A
SHAFT
P
T
B
28
10
From Tractor - Port ‘I’
Top
ROLL
EJECT
VALVE
15
To Tractor Return Port
ROLL-UP
MOTOR
23
Bottom
3
26
16
To Tractor
Hydraulics
Port II
20
NOTE
4
2
11
21
2
5
13
P
8
CUTTER
MOTOR
B
22
17
LIFT
CYL.
A
1
SOLENOID
CHECK
VALVE
14
From Tractor
Hydraulics
Port II
To 1-Bank Valve Block
To 5-Bank Valve Block Port ‘B’
To 5-Bank Valve
Block ‘A’ Port
1
2
18
SOLENOID
RELIEF
VALVE
T
DEPTH CYL.
To Oil Cooler
12
From 5-Bank Valve Block PORT ‘A’
10
CUT-OFF
MOTOR
24
CONVEYOR
MOTOR
SHAFT
2
ROLL
EJECT
VALVE
B
19
9
SHAFT
0.062 O ORIFICE
AT THIS PORT
To Oil Cooler
1
7
15
ROLL-UP
MOTOR
3-03
6
A
NOTE
From 5-Bank
Valve Block
‘B’ Port
1
From 5-Bank Valve
Block ‘T’ Port
From 7-Bank Valve
Block ‘T’ Port
NON CURRENT TO SERIAL
# 178
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere Hydraulic System Hose Assemblies
Conveyor & Cutter Head - Current from Serial Number 179
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
R200067
H500513
R200055
R200054
H500574
R200066
R200064
R200014
R200065
R200015
H500631
R200058
R200053
H500632
R200016
R200056
R100569
R200057
R200068
R200087
R200063
R200062
R200088
R200059
R200130
R200131
R200132
R200133
R200134
Hose Assembly. 5 Bank Valve to Main Conveyor Motor - N/C to #178
Hose Assembly. Tractor to Depth Cylinder
Hose Assembly. Tractor to Solenoid Relief Valve
Hose Assembly. Tractor from Solenoid Relief Valve
Hose Assembly. Tractor to Depth Cylinder
Hose Assembly. Solenoid Valve to Roll-Up Motor - N/C to #178
Hose Assembly. Conveyor Motor to Roll-Up Motor - N/C to #178
Hose Assembly. Tee from 7-Block Valve Bank to Oil Cooler
Hose Assembly. 7-Block Valve Bank Tee to Roll-Up Motor - N/C to #178
Hose Assembly. 7 Bank Valve 'T' Port to Return 'T'
Hose Assembly. Tractor to Cutter Motor
Hose Assembly. Cut-Off Motor from 5-Bank Valve Block from Tractor
Hose Assembly. Solenoid Valve to Tractor Return
Hose Assembly. Cutter Motor to Tractor
Hose Assembly. 5 Bank Valve 'T' Port to Return 'T'
Hose Assembly. Tee to Lift Cylinder
Tube Assembly. 1/2 in. 90 deg.
Hose Assembly. Solenoid Valve to Lift Cylinder
Hose Assembly. Check Valve Port to Cooler Return - N/C to #178
Hose Assembly. Cutter Motor - Male End Return
Hose Assembly. Depth Cylinder - Male End
Hose Assembly. Depth Cylinder - Female End
Hose Assembly. Cutter Motor - Female End Pressure
Hose Assembly. Cut-Off Motor to 1-Bank Valve Block
Hose Assembly. Roll Eject Tee to 5 Bank - Current from #179
Hose Assembly. Roll-Up Motor to Roll Eject Tee - Current from #179
Hose Assembly. Roll-Up Motor to Roll Eject Valve - Current from #179
Hose Assembly. Conveyor Motor to Roll Eject - Current from #179
Hose Assembly. 5 Bank Valve to Conveyor Motor - Current from #179
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
NOTE
Items 1, 6, 7, 9 & 19 are Non Current.
Replaced by Roll Eject Field Kit - R500105.
KH20119 - Directional Control Valve
KH20233 - Valve Body
4x - F180216 - Bolt - 10 UNC x 1 3/4 SOC HD
4x - F310200 - #10 Lockwasher
2x - F840400 - Nut 1/4 UNC Serrated Flange
R200130 - Hose
R200131 - Hose
R200132 - Hose
R200133 - Hose
R200134 - Hose
8-8-070220 - Fitting
8-8-070120 - Fitting
8-090109B - Fitting
8-8-8-070429 - Fitting
8-10-070120 - Fitting
R101017 - Mounting Plate (Retrofit)
2x - F610406 - Flathead Bolt 1/4-20 x 3/4
2x - F210408 - Nyloc Nut 1/4-20 Gr.8 UNC (4x for Retrofit)
2x - F180420 - Hex Socket Cap Screw 1/4-20 x 2
30-Oct-12
3-04
To 5-Bank Valve Block Port ‘B’
To 5-Bank Valve
Block ‘A’ Port
From 5-Bank Valve
Block ‘B’ Port
1
1
CONVEYOR
MOTOR
19
A
SHAFT
P
1
T
B
16
Top
ROLL
EJECT
VALVE
9
10
6
To Tractor Return Port
ROLL-UP
MOTOR
Bottom
10
8
To Tractor
Hydraulics
Port II
18 12 2
14
7
3
NOTE
13
2
From Tractor
Hydraulics
Port II
9
1
SOLENOID
CHECK 13
VALVE
LIFT
CYL.
1
11
P
2
15
A
CUTTER
MOTOR
B
1
2
7
SOLENOID
RELIEF
VALVE
T
1
11
DEPTH CYL.
To Oil Cooler
17
CUT-OFF
MOTOR
A
A
B
B
From 5-Bank Valve
Block ‘T’ Port
From 5-Bank Valve Block PORT ‘A’
From 7-Bank Valve
Block ‘T’ Port
NON CURRENT TO SERIAL
# 178
CONVEYOR
MOTOR
SHAFT
1
3
4
9
6
NOTE
5
ROLL-UP
MOTOR
9
SHAFT
8
0.062 O ORIFICE
AT THIS PORT
3-05
10
To Oil Cooler
18
16
2
1
ROLL
EJECT
VALVE
10
17
From 5-Bank
Valve Block
‘B’ Port
1
12
2
2
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere Hydraulic System Fittings
Conveyor & Cutter Head - Current from Serial Number 179
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
8-10-070120
8-8-070120
8-8-8-070432
12-12-12-070432
12-12-12-070433
20-20-20-070401
6-6-070220
KH00128
20-12-070123
8-10-070220
4-4-070120
KH20196
8-12-070120
8-8-8-070433
8-8-8-070428
8-8-070220
KH00111
8-8-070221
8-8-8-070429
Fitting. No. 8 JIC to No. 10 ORB Straight
Fitting. No. 8 JIC Swivel Run 'T'
Fitting. No. 12 JIC Swivel Run 'T' - Non Current to Serial # 178
Fitting. No. 12 JIC Swivel Branch 'T' - Non Current to Serial # 178
Fitting. No. 20 JIC 'T'
Fitting. No. 6 JIC to No. 6 ORB 90 deg. Elbow
Fitting. No. 20 JIC Swivel to 1 1/4 in. Hose Barb Adapter
Fitting. No. 20 JIC Female to 12 JIC Male Adapter
Check Valve. In-Line
Fitting. No. 8 JIC Swivel Branch 'T'
Fitting. No. 8 ORB Swivel Branch 'T'
Fitting. No. 8 JIC to No. ORB 90 deg. Elbow
Fitting. No. 8 BSP to No. 8 JIC Straight
Fitting. No. 8 JIC Swivel to No. 8 ORB Straight
Fitting. No. 8 ORB Swivel Branch 'T' - Current from Serial # 179
5
2
1
1
1
1
2
1
2
2
2
1
2
1
1
1
2
1
1
NOTE
Items 4 & 5 are Non Current.
Replaced by Roll Eject Field Kit - R500105.
KH20119 - Directional Control Valve
KH20233 - Valve Body
4x - F180216 - Bolt - 10 UNC x 1 3/4 SOC HD
4x - F310200 - #10 Lockwasher
2x - F840400 - Nut 1/4 UNC Serrated Flange
R200130 - Hose
R200131 - Hose
R200132 - Hose
R200133 - Hose
R200134 - Hose
8-8-070220 - Fitting
8-8-070120 - Fitting
8-090109B - Fitting
8-8-8-070429 - Fitting
8-10-070120 - Fitting
R101017 - Mounting Plate (Retrofit)
2x - F610406 - Flathead Bolt 1/4-20 x 3/4
2x - F210408 - Nyloc Nut 1/4-20 Gr.8 UNC (4x for Retrofit)
2x - F180420 - Hex Socket Cap Screw 1/4-20 x 2
31-Oct-12
3-06
To 7 Bank Valve Block. See Page 3-15
From 4 & 5 Valve Block ‘TO’ Port
From Load Sense Port on 7 Bank Valve Block
To 5 Valve Block Port ‘P’
14
From Down Pressure
TRACTOR RETURN
‘LS’ From 5 Valve Block
15
16
11
8
7
2
3
4
1
6
MAIN
PUMP
12
LS
LS
NOTE
SEE PAGE 3-25 FOR THE
LOAD SENSE AMPLIFIER
CONNECTIONS.
5
ARM
PUMP
FILTER
OIL TANK
13
10
From 4 Valve Block Port ‘T’
From 7 Bank and
5 Bank Valves
3-07
COOLER
9
ITEM
NO. PART NO.
DESCRIPTION
QTY
Hydraulic Tank, Pump & Filters - Current from Serial Number 164
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
R200006
R200009
R200084
R200008
A200002
R100889
R200082
R200086
R200083
R200094
R200011
R200010
R200004
R200014
R200085
R200092
R200093
Hose Assembly. Main Pump to Tee. 'LS' on 4 & 5 Bank Valves
Hose Assembly. Arm Pump to Load Sense Port on 7 Bank Valves
Hose Assembly. Arm Pump to 7 Bank 'P' Port
Hose Assembly. Main Pump to Hydraulic Tank
Hose Assembly - Non Current up to Serial No. 169
Hose Assembly - Current from Serial No. 170
Hose. Suction Feed 3 in. x 28 in.
Hose Assembly. Main Pump Tee to To 4 Bank Valves Port 'P'
Hose Assembly. Main Pump to Tee.
Hose. 3/4 in. Low Pressure Return
Hose Assembly. Oil Cooler to Hydraulic Tank Filter
Hose Assembly. 4 & 5 Bank Valves 'To' Port
Hose Assembly. Hydraulic Tank from Auxilary Pump
Hose Assembly. Main Return
Hose Assembly. Main Pump Tee. To 5 Bank Valves Port 'P'
Hose Assembly. Main Pump 'LS' Tee. To 'LS' on 5 Bank Valves
Hose Assembly. Main Pump 'LS' Tee. To 'LS' on 4 Bank Valves
20-Jun-11
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3-08
19
To 7 Bank Valve Block. See Page 3-15
From Down Pressure
From 4 & 5 Valve Block ‘TO’ Port
From Load Sense Port on 7 Bank Valve Block
1
20
TRACTOR RETURN
8
21
2
8
14
4
24
28
MAIN
PUMP
23
LS
12
14
4 25
27
5
28 26
7
LS
NOTE
ARM
PUMP 3
SEE PAGE 3-25 FOR THE
LOAD SENSE AMPLIFIER
CONNECTIONS.
18
15 6
FILTER
17
12
6
9
16
OIL TANK
13
11
22
13
From 7 Bank and
5 Bank Valves
3-09
COOLER
13
10
From 4 Valve Block Port ‘T’
10
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere Hydraulic System Fittings
Hydraulic Tank, Pump & Filters - Current from Serial Number 164
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
20-12-070123
20-20-20-070401
KH00108
8-12-070120
KH00310
KH00403
KM60016
KH80005
4-4-070120
20-24-430192
20-16-430292
32-32-430292
4-5-070120
KM60015
8-12-070220
KH00133
12-12-070220
A101142
6-12-070220
12-27-070187
12-12-070221
KH20176
KH01109
KH00123
KH00106
KH00103
KH00311
KH00105
KH60010
Fitting. No. 20 JIC F to No. 12 JIC Reducer
Fitting. No. 20 JIC Branch Tee
Split Flange. SF 3-16 (I inch)
Fitting. 1/2 Straight Thread 'O' Ring Connector
Fitting 90 deg. - Non Current up to Serial No. 169
Fitting 45 deg. - Current from Serial No. 170
Hose Clamp
'O' Ring. Pump Interface
Fitting. No. 4 ORB to No. 4 JIC Straight
Fitting. No. 24 SAE to Hose Barb 1 1/4 in.
Fitting. 1 1/4 Beaded Hose Barb x No. 16 ORB 90 deg. Elbow
Fitting. 90 deg. Swivel Barb. 2 in. SAE x 2 in. Beaded Tube
Hose Clamp. 1 1/4 in.
Split Flange. SF 3-32 (2 inch)
Fitting. Adapter Bushing. No. 24 to No. 12 ORB
Fitting. M27 x No. 12 JIC Straight Adapter
Fitting. No. 12 JIC to No. 12 JIC Swivel 90 deg. Elbow
Shuttle Valve
Fitting. No. 12 JIC Swivel to 3/4 in. Hose Barb
Fitting. Flange Adapter SF6-20 x 20 JIC 45 deg. Elbow - Code 62
Fitting. Split Flange SF6-20 1 1/4
Fitting. 2 1/2 in. NPT x 3 inch Hose Barb
Hose Barb 3 in. NPT x 3 inch Hose 90 deg.
Fitting. Flange Adapter 2 1/2 in. NPT
Hose Clamp. M8 86-91
20-Jun-11
2
1
1
1
1
1
4
1
3
1
2
1
2
3
2
1
1
1
1
1
1
1
1
1
1
1
1
1
4
3-10
2
I
PALLET
DROP
CYL.
11
1
10
From Main Pump
TO
LS
36
III
PALLET
LOAD
CYL.
1
2
3
4
25
27
P
T
A
T
28
POWER
BEYOND
1
B
31
PALLET LIFT
CYL. L.H.
LS
LS
16
3
37
B
P
A
5
29
T
P
35
II
To Hydraulic Tank
7
PALLET
ROTATE
19
13
38
15
TRACTOR HYDRAULICS
To Hydraulic Tank
40
30
21
To Main Hydraulic Pump LS Port
26
From Cutter Head Motor (In-Line)
LOAD
SENSE
20
LS
39
TO
‘TO’
PORT
T
21
P
20
4&5
BANK
From Conveyor Motor
1
2
3
4
5
14
PALLET LIFT
CYL. R.H.
A
LX
NON CURRENT TO SERIAL # 170
32
29
To 4 Bank
LS Port B
33
B
GATE CYL.
9
6
13
24
23
To 5 Bank
LS Port B
18
7 BANK
CONTROL
VALVES
SEE PG 3-15
7
P
34
T
To Main Return ‘T’
4
LS
8
From Cut-Off Motor
PRESSURE SWITCH
12
SHAFT
INDEX
CONVEYOR
MOTOR
17
BAD ROLL
EJECT CYL.
3-11
To Main
Hydraulic
Pump
LS Port
33
TO LOAD
SENSE ON
ARM
PUMP
To Cutter Head Motor (In-Line)
To Cut-Off Motor
22
ITEM
NO. PART NO.
DESCRIPTION
QTY
Rear Valves, Motors & Cylinders - Current from Serial Number 171
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
R200045
R200046
R200047
R200088
R200079
R200074
R200086
R200077
R200076
R200094
R200083
R200058
R200092
R200072
R200010
R200049
R200073
R200075
R200069
R200070
R200071
R200059
R200078
R200016
R200050
R200087
R200020
R200091
R200093
R200085
R200047
R200067
R200006
34
35
36
37
38
39
40
R200015
R200051
R200052
R200090
R200089
R200104
R200009
Hose Assembly. Pallet Rotate to 4 Bank Valves
Hose Assembly. 4 Bank Valves to Pallet Rotate
Hose Assembly. Pallet Load Cylinder to 4 Bank Valves
Hose Assembly. 1 Bank Valve to Cutter Head Motor Pressure
Hose Assembly. Tee-Pallet Lift Cylinders to 4 Bank Valves
Hose Assembly. Index Conveyor from 5 Bank Valves
Hose Assembly. Main Pump Tee to 4 Bank 'P' Port
Hose Assembly. 5 Bank Valves to Gate Cylinder
Hose Assembly. Gate Cylinder to 5 Bank Valves
Hose Assembly. 4 Bank Valves to Hydraulic Tank
Hose Assembly. 4 Bank Valves to Main Pump
Hose Assembly. Cut-Off Motor to 4 Bank Valves
Hose Assembly. Valve Banks from Shuttle Valve 12 in.
Hose Assembly. Bad Roll Eject Cylinder to 5 Bank Valves
Hose Assembly. 'TO' Return to Hydraulic Tank
Hose Assembly. 4 Bank Valves to Pallet Drop Cylinder
Hose Assembly. 5 Bank Valvesto Bad Roll Eject Cylinder
Hose Assembly. 5 Bank Valves to Index Conveyor Motor
Hose Assembly. 4 Bank Valves to Tee-Pallet Lift Cylinders
Hose Assembly. Tee to Pallet Lift Cylinder L.H.
Hose Assembly. Tee to Pallet Lift Cylinder L.H.
Hose Assembly. 5 Bank Valves to Cut-Off
Hose Assembly. Gate Cylinder to Pressure Switch
Hose Assembly. 5 Bank Valves to Tee (Oil Cooler)
Hose Assembly. Pallet Drop Cylinder from 4 Bank Valves
Hose Assembly. Cutter Motor to 1 Bank Valve Return
Hose Assembly. Filter to Tractor Power Beyond Port 'T'
Hose Assembly. 1 Bank Valve to Load Sense
Hose Assembly. Valve Banks to Shuttle Valve 24 in.
Hose Assembly. Main Pump Pressure Tee to 5 Bank 'P' Port
Hose Assembly. 4 Bank Valves to Pallet Load Cylinder
Hose Assembly. Conveyor Motor to 5 Bank Valves
Hose Assembly. 7 Bank Valves to Load Sense on Arm Pump - Current
Hose Assembly. Shuttle Valve from Main Pump - N.C. to Serial # 170
Hose Assembly. 7 Bank Valves to Tee (Oil Cooler)
Hose Assembly. Relief Valve to Pallet Drop Cylinder
Hose Assembly. Relief Valve to Pallet Drop Cylinder
Hose Assembly. Filter to 1 Bank Valve Port 'T'
Hose Assembly. 1 Bank Valve to Power Beyond Port 'P'
Hose Assembly. 5 Bank LX to 4 Bank LS - Current
Hose Assembly. Load Sense Main Pump to Manifold - Current
Hose Assembly. 7 Bank Valves to Load Sense on Arm Pump - N.C.
20-Apr-12
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3-12
PALLET
DROP
CYL.
12
I
2
From Main Pump
3
To Hydraulic Tank
PALLET
ROTATE
3
TO
7 LS
PALLET
LOAD
CYL.
21
T
P
1
2
3
4
13
13
5
3
9-16
11
13
13
5
4
20
LS
3
B
P
T
T
P
T
P
A
III
11
1
II
21
9-17
POWER
BEYOND
4
LS
1
7
5
PALLET LIFT
CYL. L.H.
22
TRACTOR HYDRAULICS
To Hydraulic Tank
8
To Main Hydraulic Pump LS Port
8
From Cutter Head Motor (In-Line)
LOAD
SENSE
3
‘TO’
PORT
13
14
8
PALLET LIFT 8
CYL. R.H.
GATE CYL.
5
15
LS
7
1
2
3
4
5
From Conveyor Motor
TO
T
10
3
P
4&5
BANK
13
14
To 4 Bank
LS Port B
5
24
7
LX
19
6
23
To Main
Hydraulic
Pump
LS Port
To 5 Bank
LS Port B
7 BANK
CONTROL
VALVES
SEE PG 3-15
18
P
7
LS
T
7
From Cut-Off Motor
PRESSURE SWITCH
11
SHAFT
INDEX
CONVEYOR
MOTOR
11
21
BAD ROLL
EJECT CYL.
3-13
TO LOAD
SENSE ON
ARM
PUMP
To Cutter Head Motor (In-Line)
To Cut-Off Motor
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere Hydraulic System Components & Fittings
Rear Valves, Motors & Cylinders - Current from Serial Number 171
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
6-6-070120
6-4-070120
12-12-070120
12-22-070187
8-10-070120
4-4-070220
4-5-070120
6-8-070220
MH10004
8-8-8-070401
6-10-070220
6-4-070220
6-10-070120
6-10-070320
8-070112
6-8-070102
8-8-070102
6-6-070181
4-4-4-070433
6-14-070187
6-6-070220
4-4-4-070401
4-4-070120
KH20176
Fitting. No. 12 JIC to M22 Male
Fitting. No. 6 JIC to No. 8 - 90 deg. Elbow
Fitting. Quick Connext x 1/2 NPT
Fitting. No. 8 JIC 'T'
Fitting. No. 8 JIC Cap
Fitting. No. 6 JIC to 1/2 NPT Male
Fitting. No. 8 JIC to 1/2 NPT Male
Fitting. No. 6 ORB to No. 6 JIC Swivel
Fitting. No. 6 JIC to M14 Male
Fitting. No. 4 Tee
Fitting. No. 4 JIC to No. 4 ORB Straight - Non Current to Serial # 170
Shuttle Valve - Non Current to Serial # 170
18-Apr-12
4
1
6
2
7
2
7
4
4
2
4
1
8
2
1
2
2
1
1
1
6
1
3
1
3-14
F1
NON CURRENT
TO SERIAL #168
GRIPPER HEAD
ROTATE CYL.
E1
NON CURRENT
TO SERIAL # 168
ROTATE CYL.
21
22
30
19
31
14
7
18
18
27
31
7
25
TO
TO
7 BANK 7 BANK
1A
1B
FROM PUMP
24
TO
F4
TO E4
TO ARM PUMP
SEE PAGE 3-01
20
19
RETURN
TO COOLER
(VIA TEE)
31
11
10
14
31
23
26
1
8
9
29
P
LS
1
T
30
2
3
3
E1
E2
E3
F4
F1
F2
F3
E4
30
15
2
28
4
5
4
12
13
6
16
7
17
A
1. BOOM ROTATE
2. BOOM LIFT
3. REACH ARM
4. GRIPPER ROTATE
5. MULTI FINGER GRIP
6. SINGLE FINGER
7. SQUEEZE
B
3-15
5
6
ITEM
NO. PART NO.
DESCRIPTION
QTY
Robotic Arm - Current from Serial Number 169
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
R200033
R200031
R200029
R200027
R200024
R200022
R200080
R200015
R200084
R200009
2692335-01
R200026
R200028
R200081
R200030
R200025
R200023
2692304-09
2692304-08
2692304-14
2692304-12
2692307-03
2692307-02
2692304-11
2692304-13
R200032
2692307-04
2692307-01
2692307-05
R200095
R200117
Hose Assembly. 7 Bank Valves to Lift Cylinder Cap
Hose Assembly. 7 Bank Valves to Reach Cylinder
Hose Assembly. 7 Bank Valves to E-F Bulkhead F4
Hose Assembly. 7 Bank Valves to E-F Bulkhead E2
Hose Assembly. 7 Bank Valves to Rotate Cylinder
Hose Assembly. 7 Bank Valves Return
Hose Assembly. Arm Valve Bank 'P' Port from Pump
Hose Assembly. Load Sense to Arm Pump
Hose Assembly. E-F Bulkhead E1 to Squeeze Cylinder Cap
Hose Assembly. 7 Bank Valves to Rotate Cylinder Load Control Valve
Hose Assembly. 7 Bank Valves to Reach Cylinder Load Control Valve
Hose Assembly. E-F Bulkhead E4 to Gripper Head Rotate Cylinder Rod
Hose Assembly. Gripper Head Rotate from E-F Bulkhead Cap F4
Hose Assembly. E-F Bulkhead F2 to Tee (Gripper Cylinder) Cap
Hose Assembly. Gripper Cylinder Tee to Gripper Cylinder Tee
Hose Assembly. E-F Bulkhead F3 to Gripper Cylinder
Hose Assembly. 7 Bank Valves to Lift Cylinder Rod
Hose Assembly. Tee (Gripper Cylinder from E-F Bulkhead E2 Rod
Hose Assembly. E-F Bulkhead E3 to Gripper Cylinder
Hose Assembly. Squeeze Cylinder from E-F Bulkhead F1 Rod
Hose Assembly. Counter Balance Valve
Hose Assembly. Counter Balance Valve - Current from Serial No. 169
18-Apr-12
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
2
4
3-16
1
NON CURRENT
TO SERIAL #168
GRIPPER HEAD
ROTATE CYL.
5
F1
3
E1
3
5
3
10,
17
6
2
1
6
11
2
3
19
6
4
TO
F4
TO E4
5
TO
TO
7 BANK 7 BANK
1A
1B
10-17
8
2
2
4
5
3
2
7
19
3
5
12
14
20
7
P
LS
3
2
3
10-17
E1
E2
E3
F4
F1
F2
F3
E4
19
21
T
1
7
9
10-17
13
7
7
6
5
4
15 18 6
B
A
1. BOOM ROTATE
2. BOOM LIFT
3. REACH ARM
4. GRIPPER ROTATE
5. MULTI FINGER GRIP
6. SINGLE FINGER
7. SQUEEZE
16
3-17
7
TO ARM PUMP
SEE PAGE 3-01
6
FROM PUMP
5
2
19
RETURN
TO COOLER
(VIA TEE)
19
7 11
2
10,
17
18
5
4
2
NON CURRENT
TO SERIAL # 168
ROTATE CYL.
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere Hydraulic System Components & Fittings
Robotic Arm - Current from Serial Number 169
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
R500012
KH70114
6-6-070220
4-4-070220
4128723
6-6-6-070428
6-6-6-070429
6-6-070120
4128874
R500015
KH70115
KH20184
R500013
KH70115
16-12-070120
6-10-070120
R500014
KH70116
4134283
KH20194
KH20222
6-6-6-070432
6-6-070181
12-12-070120
4-5-070120
Gripper Head Turn Cylinder
Seal Kit
Cylinder. Face Mount
Fitting. No. 6 ORB Swivel Run 'T'
Cylinder. Squeeze
Cylinder. Reach
Seal Kit
Counter Balance Valve Body
Cylinder. Arm Turn
Seal Kit
Cylinder. Lift
Seal Kit
Presure Switch
Robotic Arm PVG Valve Bank
Counter Balance Valve Spool
Fitting. No. 6 JIC to No. 6 Swivel
1
6
8
6
5
7
5
6
1
1
1
6
1
1
1
14
1
1
1
1
4
1
5
1
1
25-Jul-13
3-18
3-19
10
11
12
2
Items 10, 11 & 12 mount the
Hydraulic Pump to the Pump
Drive Mounting Adapter.
NOTE 1
6
8
1
14
15
5A
16
NOTE 2
9
7
Current Items 3, 4, 5A, 7,
8, 9, 13, 14, 15 & 16 are
available as Pump Drive
Assembly Service Kit
- A500258
NOTE 4
Anti-f retting agent must be
applied to the spline of the
Pump Shaf t bef ore installation.
4
3
13
5
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere
PUMP DRIVE ASSEMBLY
1
2
3
4
5
5A
6
7
8
9
10
11
12
13
14
15
16
G1820060
G1820040
G0108030
F924412
F924420
KN02018
R300041
A300279
A100144
A101360
F140503
A101360
A101570
A101361
A101571
F040820
F310800
F320800
G310800
KM11490
KB16255
F140502
Bolt M20 x 2.5 x 60 (Metric)
Key 1/4 x 1/4 x 1 1/4 - Obsolete
Key 1/4 x 1/4 x 2 - Current from Serial No. 188
Adapter. Shaft Flange
Shaft - John Deere - Non Current
Shaft - John Deere - Current from Serial No. 188
Adapter Plate
Set Screw 3/8 unc x 3/8 Lg. - Obsolete
Set Screw 5/16 unc x 3/8 - Current from Serial No. 188
Pump Mount - Obsolete
Pump Mount - Current from Serial No. 188
Pump Shaft Flange - Obsolete
Pump Shaft Flange - Current from Serial No. 188
Lockwasher
Flatwasher
Lockwasher M8
Grease Fitting 90 deg. - Current from Serial No. 188
Bearing - 55mm - Current from Serial No. 188
Set Screw 5/16 unc x 1/4 - Current from Serial No. 188
NOTE 1
Items 10, 11 & 12 mount the
Hydraulic Pump to the Pump
Drive Mounting Adapter.
NOTE 3
Item 5 includes;
Qty
Bolt - G0100090 4
Lockwasher - G310100 4
4
4
8
1
1
1
1
1
1
2
1
1
1
1
1
4
4
4
8
1
1
1
NOTE 2
Anti-fretting agent must be
applied to the spline of the
Pump Shaft before installation.
NOTE 4
Current Items 3, 4, 5A, 7, 8,
9, 13, 14, 15 & 16 are
available as Pump Drive
Assembly Service Kit
- A500258
31-Jul-12
3-20
3-19a
34
34
33
21
12
25
36
36
35
35
14
23
37
11
37
9
31
12
14
34
24
34
8
25
22
30 12
11
25
32
27
1
30
20
23
29
28
17
12
25
22
15
18
14
19
11
30
10
14
28
26
12
14
11
12
18
26
25
8
14
6
2
3
13
9
16
4
7
5
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere 6105 & 6115
PUMP DRIVE ASSEMBLY - Current from Serial # 214 (excl. 215)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
G1820060
A101656
G0108030
F924424
KN02018
F924416
F140503
F210900
A101571
A101652
F310808
F330808
G310800
F040846
KD85123
F140502
A101649
F140503
A300380
A300381
A300382
F040506
F041030
F140604
F210808
F040934
A101653
F211008
F310508
F331008
F926615
R101281
R101282
R101291
F320608
F040610
F210608
Shaft - John Deere
Key 1/4 x 1/4 x 2 1/2
Adapter. Shaft Flange
Key 1/4 x 1/4 x 1.625
Set Screw 5/16 unc x 3/8
Nyloc Nut 9/16 unc
Pump Shaft Flange
Coupling Flange - 1.125 Bore
Lockwasher 1/2 Gr.8
Lockwasher M8
Morflex Coupling
Pump Coupling Guard
Set Screw 5/16-18 unc x 3/8
JD Pump Mounting Bracket
Front Pump Mount Support L.H.
Front Pump Mount Support R.H.
Bolt 9/16 unc x 3 1/2 Gr.8
Coupling Flange - 1 1/2 Bore
Key 3/8 x 3/8 x 1.50
Cooler Spacer Bracket R.H. - Current from Serial No. 217
Cooler Spacer Bracket L.H. - Current from Serial No. 217
Cooler Spacer - Current from Serial No. 217
Flatwasher 3/8 uss Gr.8 - Current from Serial No. 217
Bolt 3/9 unc x 1 Gr.8 - Current from Serial No. 217
Nyloc Nut 3/8 unc Gr.8 - Current from Serial No. 217
4
1
8
1
1
1
2
4
1
1
8
16
8
8
1
1
1
2
1
1
1
4
2
2
8
4
1
2
4
4
1
1
1
4
8
4
4
04-Feb-14 3-20a
23
1
22
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere
HYDRAULIC TANK ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
R300025
KH40059
KH40064
KH40065
KH40069
F040612
F310600
8-12-070220
4134628KH10005
24-090109A
F020614
F320600
F210600
8-12-070220
A100137
A100143
F040406
F310400
F320400
KH40068
32-32-430292
KH00311
Hydraulic Tank
Filter Element
Items 2 to 4 are available
Filter Head
as Assembly - KH40058
Filter Housing
Breather Cap
Lockwasher 3/8
Fitting. No. 6 JIC to No. 12 ORB 90 Deg.
Temperature Sensor
Temperature Level Gauge
Hex Pipe Plug - Magnetic
Washer 3/8
Locknut 3/8 unc
Fitting. No. 8 JIC to No. 12 ORB 90 Deg.
Access Cover
Gasket
Lockwasher 1/4
Flatwasher 1/4
Breather Basket
Fitting. 32 SAE x 2 in. Beaded Hose Barb 90 Deg.
Fitting. BSPP Swivel 90 deg. To Hose Barb Size 48
1
1
1
1
1
4
4
1
1
1
1
6
6
6
2
1
1
16
16
16
1
1
1
7-May-12
3-22
1
7 BANK PVG. VALVE
1
2
3
4
A
4
Multi-Finger Grip
5
Single Finger Grip
6
B
Squeeze
18
1
2
3
4
A
B
1
2
3
4
A
B
Gripper Head - Rotate
A
1
2
3
4
16
B
Arm - Reach
1
2
3
4
A
B
19
7
1
2
3
4
A
Arm - Lift
B
1
2
3
4
A
Boom - Rotate
T
P
B
17
P
B
Cutter Motor
5 BANK PVG. VALVE from PUMP
A
T
2
21
Cut-Off Motor
13
B
Gate Cylinder
12
B
Bad Roll Eject Cyl.
11
B
Intex Conveyor Motor
14
1
2
3
4
B
1
2
3
4
A
B
20
21
1
2
3
4
16
A
Conveyor Motor
1 BANK PVG. VALVE
1
2
3
4
A
1
2
3
4
A
18
P
T
1
2
3
4
A
4 BANK PVG. VALVE from TRACTOR
3
15
10
B
Pallet Rotate
B
Pallet Drop Cyl.
9
B
Pallet Load Cyl.
8
1
2
3
4
A
Pallet Lift Cyl.
B
1
2
3
4
A
18
1
2
3
4
A
P
T
1
2
3
4
A
IMPORTANT
157B
9754
3-23
MANUFACTURER’S
PART NUMBER
When replacing a spool:
Check that the manufacturer’s part
number etched into the spool
is the same on BOTH SPOOLS.
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere
HYDRAULIC PVG VALVE BANKS
1
2
3
4
5
6
7
KH20194
KH20218
KH20219
KH20253
KH20227
KH20254
KH20244
8
9
10
11
12
13
14
15
16
KH20255
KH20216
KH20256
KH20257
KH20249
KH20258
KH20255
KH20259
KH20235
17
18
KH20217
KH20260
19
KH20153
20
KH20262
21
KH20261
Manufacturer's Part #
7 Bank from Arm Pump
5 Bank from Main Pump
4 Bank from Main Pump
Spool. Squeeze
157B7025
Spool. Mulit-Finger Grip
157B7022
Spool. Single Finger Grip
157B7021
Spool. Gripper Head Rotate
157B9751
Spool. Arm - Reach
157B9751
Spool. Arm - Lift
157B9751
Spool. Boom Rotate
157B9751
Spool. Pallet Load
157B9400
Spool. Pallet Drop
157B9403
Spool. Pallet Rotate
157B7105
Spool. Bad Roll Eject
157B9401
Spool. Rear Gate Open/Close
157B9405
Spool. Cut-Off Motor
157B9101
Spool. Index Conveyor Motor
157B9400
Spool. Pallet Lift
157B9402
Spool. Conveyor Motor
157B7103
Spool. Cutter Motor
157B7103
1 Bank - Cutter Motor from Tractor
Coil. Squeeze
Coil. Mulit-Finger Grip
Coil. Single Finger Grip
Coil. Pallet Load
Coil. Pallet Drop
Coil. Pallet Rotate
Coil. Bad Roll Eject
Coil. Index Conveyor Motor
Coil. Pallet Lift
Coil. Gripper Head Rotate
Coil. Arm - Reach
Coil. Arm - Lift
Coil. Boom Rotate
Coil. Rear Gate Open/Close
Coil. Cut-Off Motor
Coil. Conveyor Motor
Coil. Cutter Motor
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
13-Aug-13
3-24
5 BANK VALVES
MAIN
PUMP
10
A
P
10
LS
P
1
T
1
2 3 4 5
LX
4 BANK VALVES
A
B
LS
2
4 3 2 1
10
14
P
10
T
B
LS
13
6
16
5
3
7 BANK VALVES
LS
5
ARM PUMP
1
1
T
3
A
P
2 3 4 5 6 7
2
B
LS
10
LOAD
SENSE
AMPLIFIER
15
11
4
10
12
5 BANK VALVES
MAIN
PUMP
10
10
LS
1
T
1
P
A
P
2 3 4 5
A
4 BANK VALVES
B
LS
2
P
4 3 2 1
14
T
B
LS
13
9
7
5
3
5
8
5
5
1
3
NON CURRENT
2
7 BANK VALVES
LS
LOAD
SENSE
AMPLIFIER
12
6
LS
B
15
11
10
12
5
9
1
3
2
LOAD
SENSE
AMPLIFIER
5
4
2 3 4 5 6 7
G
10
3-25
1
T
4
A
P
ARM PUMP
ITEM
NO. PART NO.
DESCRIPTION
QTY
Load Sense Amplifier Connections - Current from Serial Number 171
1
2
3
4
5
6
KH30029
A200015
A200016
KH20125
4-4-070120
R200009
7
8
9
KH20176
R200093
R200092
10
11
12
4-5-070120
KH30043
R200006
13
14
15
16
KH20219
KH20218
KH20194
R200104
Main Pump
Hose Assembly. Main Pump Load Sense to Amplifier Port '3'
Hose Assembly. Main Pump Load Sense to Amplifier Port '1'
Load Sense Amplifier
Hose Assembly. Load Sense Main Pump to Manifold - Current
Hose Assembly. 7 Bank Valves to Load Sense on Arm Pump - N.C.
Shuttle Valve - Non Current to Serial # 170
Hose Assembly. Shuttle Valve to 5 Bank Valve Load Sense - N.C. #170
Hose Assembly. Shuttle Valve to 4 Bank Valve Load Sense - N.C. #170
Hose Assembly. - Non Current
Arm Pump
Hose Assembly. 7 Bank Valves to Load Sense on Arm Pump - Current
Hose Assembly. Non Current
4 Bank Valves
5 Bank Valves
7 Bank Valves
Hose Assembly. 5 Bank LX to 4 Bank LS - Current
20-Apr-12
1
1
1
1
3
1
1
1
1
1
1
7
1
1
2
1
1
1
1
3-26
T
TRACTOR HYDRAULICS
III
P
II
From
Cutter Head
Motor (In-Line)
LS
I
To
Hydraulic
Tank
POWER
BEYOND
From
Main
Pump
To
Hydraulic
Tank
To Cutter Head
Motor (In-Line)
6
5
From 5 Bank LX
17
15
TO
16
LS
LS
B
T
T
1 2 3 4
P
To 5 Bank T Port
B
P
1
A
To 5 Bank P Port
A
NOTE
15
All Hydraulic Parts not listed
on this page are the same as
the Single Sided Pallet Injector.
See Pages: 3-01 to 3-26 for
all Single Sided Pallet Injector
Hydraulic info.
16
17
4
2
1
PUSH
BAR
CYL.
10
P1 P2
12
20
C1
V2
A
C1
B
C2
3-27
11
V1
C2
V1
7
18
9
11
18
8
RELIEF
VALVE
19
PALLET
ROTATE
PALLET
LOAD
CYL.
3
14
PALLET LIFT
CYL. L.H.
B A
V2
RELIEF 13
VALVE
DOUBLE SIDED PALLET INJECTOR HYDRAULIC CONNECTIONS
PALLET
LIFT
CYL. R.H.
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax John Deere Hydraulic System Connections
Double Sided Pallet Injector - Current from Serial Number 171
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
R200098
R200099
R200228
R200231
R200232
R200227
R200229
R200230
R200225
R200226
KH20211
KH31009
6-8-070120
8-8-070120
8-10-070220
6-10-070120
4-6-070123
6-6-070120
8-6-070120
8-6-070220
Hose Assembly. Rotary Actuator to 4 Bank Valves
Hose Assembly. 4 Bank Valves to Rotary Actuator
Hose Assembly. Relief Valve A to 4 Bank Valves
Hose Assembly. 4 Bank Valves to Relief Valve B
Hose Assembly. Relief Valve B from 4 Bank Valves
Hose Assembly. 4 Bank Valves to Relief Valve A
Hose Assembly. Relief Valve to Pallet Load Cylinder
Hose Assembly. Relief Valve to Pallet Load Cylinder
Hose Assembly. Relief Valve to Push Bar Cylinder
Hose Assembly. Relief Valve to Push Bar Cylinder
Cross Over Refief Valve
Rotary Actuator
Fitting. No. 6 JIC to No. 8 ORB Striaght
Fitting. No. 4 JIC Male to No. 6 JIC Female
1
1
1
1
1
1
1
1
1
1
2
1
4
4
2
4
2
2
1
1
NOTE
All Hydraulic Parts not listed
on this page are the same as
the Single Sided Pallet Injector.
See Pages: 3-01 to 3-26 for
all Single Sided Pallet Injector
Hydraulic info.
24-Apr-12
3-28
ITEM
NO. PART NO.
DESCRIPTION
QTY
Brush Option Connections - Current from Serial Number 171
1
2
3
4
5
6
7
8
9
KH30013
KH30014
8-10-070120
8-10-070220
R200088
H500632
H500631
R200111
R200087
Cutter Motor
Brush Motor
Fitting. No. 8 JIC to No. 10 ORB 90 Deg. Elbow
Hose Assembly. Cutter Motor - Female End Pressure
Hose Assembly. Cutter Motor to Tractor
Hose Assembly. Brush Motor to Cutter Motor
Hose Assembly. Tractor to Brush Motor
Hose Assembly. Brush Motor - Male End Return
1
1
2
2
1
1
1
1
1
5
6
3
3
A
B
T
P
7
CUTTER
MOTOR
1
4
4
A
B
T
8
P
2
BRUSH
MOTOR
9
3-29
24-Apr-12
SECTION 4
AUTO-STEER
Sensor Valve & Cam Mount
Hydraulic System
Spring Column, Reset Cylinder & Shoe Arm
4-01
4-03
4-05
ELECTRONIC AUTO-STEER - John Deere 6105 & 6115
Auto-Steer Hydraulics - John Deere 6105 & 6115
King Pin Sensor Mounting Assembly - John Deere 6105 & 6115
Spring Column, Reset Cylinder & Shoe Arm - John Deere 6105 & 6115
4-09
4-11
4-13
SEE PAGE 4-05
33
32
12
34
31
11
23
19
24
31
29
32
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
AUTO-STEER SENSOR VALVE & CAM MOUNT
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
F210800
F041254
F041264
H310014
H110116
KB16001
H110113
G0112070
F380700
F330800
KH20051
H510079
H510109
H510111
KD10056
KD10026
F220450
G0105045
F040814
H111196
A300276
G0412055
G311200
KB16010
F221050
F321000
A300296
A101366
A300332
F310200
H500013
F180426
F180216
Locknut 1/2 unc
Cam - Auto-Steer
Spacer - Cam Bearings
Bearing - Auto-Steer Cam
Spring - Auto-Steer Cam
Washer
Washer 1/2 SAE
Sensor Valve
Sensor Valve Assembly
Sensor Valve Cover Assembly
Cam Roller Arm. Sensor Valve
Cable Ass'y. (Cam to Spring Column) - See Page 4-05
Clevis - Cable End (c/w Pin & Cotter Pin)
Jam Nut 1/4 unf
Bolt M5 x .8 x 45 Gr.8.8 (Metric)
Shim. Sensor Valve Mount
Sensor Valve Mount
Bolt M12 x 55 Metric
Lockwasher M12
Rod End
Jam Nut 5/8 unf
Washer 5/8
Mount Brace
Cable Mount
Cable Support
Lock Washer #10
Sensor Manifold
Bolt 1/4 unc x 2 3/4 Soc. Hd.
Bolt 10 unc x 1 3/4 Soc. Hd.
6
2
2
1
1
2
1
1
2
6
1
1
1
1
1
1
1
2
2
1
1
4
4
1
2
2
1
1
1
6
1
2
4
3-May-12
4-02
4-03
AT POWER BEYOND
32
23
39
22
39
24
8
RH
LH
17
FROM STEER
CYLINDER
30
19
30
17
46
5
11
16
46
LA
33
26
LB
16
LOAD SENSE
TO
STEERING
BOX
38 35
21
1
34
3
2
12
LS
TRACTOR
PUMP
P
40, 41
44 & 45
16
TO
LOAD
SENSE
AT
TRACTOR
PRESSURE
TO
STEERING
BOX
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD AUTO-STEER
HYDRAULIC SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
H500007
KH20071
6-8-070120
6-6-6-070432
R500113
R200044
R200042
R200035
R200036
R200037
R200034
R200040
R200038
R200039
H500013
6-6-070120
8-8-8-070408
4160414
8-8-070120
R200043
R200041
8-6-520120
8-6-070120
8-6-070220
KH70048
KH20036
KH20056
KH20042
KH20052
KH00121
KH70108
4141230
4-4-070120
KH20175
6-6-070181
4-4-070220
KH20176
6-4-070120
6-6-070220
F040432
F320408
KH20173
KH20174
R100487
F210408
4-6-070220
Manifold
Solenoid Valve
Fitting. No. 6 JIC Swivel Run Tee
Fitting. No. 6 JIC to No. 8 ORB with 0.062 in. Orifice
Hose Assembly. A/S Manifold 'T' to Tractor Return (Power Beyond)
Hose Assembly. A/S Manifold 'P' to Steering Box Fitting
Hose Assembly. Cylinder Rod End to A/S Manifold A2
Hose Assembly. Cylinder Cap End to A/S Manifold B2
Hose Assembly. A/S Manifold B1 to Sensor Manifold 'P'
Hose Assembly. Sensor Manifold to Lockout Valve
Hose Assembly. Tractor LS Fitting to Selector Valve Port '2'
Hose Assembly. A/S Manifold 'T' to Sensor Manifold 'T'
Hose Assembly. Sensor Manifold to Shuttle Valve
Sensor Manifold
Fitting - Swivel Tee No.8 JIC
Auto-Steer Reset Cylinder
Hose Assembly. A/S Manifold A1 to Steering Box Hose @ Pump
Hose Assembly. Tractor LS Hose to Selector Valve Port '3'
Fitting. No. 8 ORF Male to No. 6 ORB Straight
Seal Kit - Solenoid Valve (KH20071)
Relief Valve for H500013
Check Valve for H500013
Check Valve for H500007
Relief Valve Kit
Fitting. No. 8 JIC Male to No. 8 ORF Swivel Female
Seal Kit -Reset Cyl
Block Manifold Assembly
Coil - Solenoid Valve
Fitting. No. 6 JIC Swivel Female to No. 6 ORB 90 deg. Elbow
Shuttle Valve
Washer 1/4 Gr.8 uss Structural
Solenoid Valve
Selector Valve - Body
Spacer
Nyloc Nut 1/4-20 Gr.8 unc
4-May-12
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
4
2
1
2
1
1
2
1
1
1
1
2
1
1
2
A/R
1
2
1
1
2
1
1
3
2
2
1
1
2
2
2
4-04
22
15, 34
66
3
65
15
16
46
16
34
17
39
68
67
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
SPRING COLUMN / RESET CYLINDER / SHOE ARM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
45
46
47
48
49
50
H310134
F040820
A101135
KB16010
F221050
F041230
KD10056
KD10026
H100045
F040606
F220450
4160320
H110334
H310054
F040612
F310608
F040606
KB20510
A100672
H310055
F040824
F210808
F040810
F310808
H310056
F040404
F310408
H310052
F040510
KM11400
015110
H310039
F040612
F310608
KD91103
H310061
4160414
KH70108
H510012
KB16011
F211200
A101279
A100692
H110693
KC01002
F020820
F210808
KS60001
F040606
Spring Column Mount
Bolt 1/2 unc x 2 GR. 8
Cylinder Mount
Rod End
Jam Nut 5/8 unf
Bolt 3/4 unc x 3 GR. 8
Cable Assy. (Top Lever Arm to Cam)
Clevis - Cable End
Retainer Washer
Jam Nut 1/4 unf
Spring Column
Shaft-Spring Column
Items 13 to 18.
Torsion Spring - See Note 1
It is recommended that these
Bolt 3/8 unc x 1 1/4 Gr. 8
items are ordered as Service
Lockwasher 3/8 Gr.8
Assembly - Part No. H510120.
Bolt 3/8 unc x 3/4 Gr. 8
Bearing c/w Snap Ring
Top Lever Arm
Support Pivot - Ski Arm
NOTE 1
Bolt 1/2 unc x 2 1/2 Gr. 8
Item 14 is Non Current and has
Bolt 1/2 unc x 1 Gr. 8
been replaced by items 60, 61,
62 & 63 - Torsion Spring Kit.
Lockwasher 1/2 Gr.8
H510199.
Pivot Pin
Mounting Pivot - Shoe Arm
NOTE
Grease Fitting
Items 32, 33, 34, 35 & 36 are
Arm - Guide Shoe
available as Ski Assembly H510012 Item 39.
Split Clamp Yoke
Bolt 3/8 unc x 1 1/4 Gr. 8
Lockwasher 3/8 Gr.8
Crosspiece c/w Bearings, Seals & Lube Fitting
Guide Shoe - Auto-Steer
Reset Cylinder (See Auto-Steer Hydraulic System for Fittings)
Seal Kit - Reset Cylinder
Ski Assembly
Rod End (MW12)
Locknut 3/4 unc
Cable Guide
Mount. Fine Adjust Cable
Chain - Shoe Arm Lift
Shackle
Nut 1/2 unc Gr.8
Bump Stop - Shoe Arm
30-May-12
1
4
1
1
2
1
1
2
1
1
2
1
1
1
2
2
1
2
1
1
1
5
3
3
1
1
1
1
3
2
1
1
1
5
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
4-06
22
15, 34
66
3
65
15
16
46
16
34
17
39
68
67
4-07
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
52
53
54
55
56
57
58
59
60
61
62
63
65
66
67
68
F320608
A300257
H110399
F320808
F040820
KD10041
KD10029
KD10031
H111207
H111208
H111209
F940616
F221250
4130903
F310508
F230508
Washer 3/8 Gr.8 uss Flat
Lever Arm - Fine Adjust
Bushing
Cable Assy. - Fine Adjust
Control Head - Fine Adjust Cable
Control Cable Only - Fine Adjust Cable
Spring - See Note
NOTE
Upper Spring Socket
Lower Spring Socket
Items 60, 61, 62 & 63 are
Spring Pin 3/8 Dia. X 1 3/4 Lg.
available as Torsion Spring
Jam Nut 3/4 unf
Service Kit - H510199.
Spacer
Nut 5/16 unc Gr.8
30-May-12
2
1
1
4
1
1
1
1
1
1
1
1
1
1
2
1
4-08
Brouwer RoboMax John Deere 6105 & 6115 - Auto-Steer Hydraulics
PRESSURE
14
3
PRESSURE
LOAD SENSE
LS
STEERING UNIT
P
LS
L
R
13
15
12
16
11
3
18
8
13
17
1
7
6
19
8
DOWN
3
4
10
5
R.H. SIDE
5
4-09
5
5
9
2
UP
9
L.H. SIDE
P
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD 6105 & 6115
AUTO-STEER HYDRAULIC Connections
1
2
3
4
5
6
7
8
9
KH20232
4160414
8-8-8520432
8-8-070120
6-6-070120
8-8-070220
8-12-070120
4-4-070120
R200256
10
11
12
13
14
15
16
17
18
19
R200251
R200250
R200255
KH01114
R200254
R200252
R200253
8-10-070120
4-090109B
8-090109B
Auto-Steer Valve Block
Ski Cylinder
Fitting. Tee
Hose Assembly. Auto-Steer Valve - Up to Ski Cylinder
Hose Assembly. Auto-Steer Valve - Down to Ski Cylinder
Hose Assembly. Tee to Auto-Steer Valve - STB
Hose Assembly. Tee to Auto-Steer Valve - STA
Hose Assembly. Tank to Auto-Steer Valve - T
Fitting.
Hose Assembly. Auto-Steer Valve - P to Tee
Hose Assembly. Existing Load Sense Hose to Auto-Steer Valve - LSI
Hose Assembly. Hydraulic Pump to Auto-Steer Valve - LSO
Plug. No. 4 SAE Plug
Plug. No. 8 SAE Plug
11-Apr-14
1
1
3
1
4
1
1
2
1
1
1
1
1
2
1
1
1
1
1
2
4-10
12
14
6
17
5
17
18
8
18
2
3
7a
16
4
11
11
10
10
7b
20
20
21
21
1
19
13
15
4-11
16
9
4
ITEM
NO. PART NO.
DESCRIPTION
QTY
King Pin Sensor Mounting Assembly
1
2
3
4
5
6
7a
7b
8
9
10
11
12
13
14
15
16
17
18
19
20
21
R100959
R100974
R100975
R100976
R100977
R101150
KE10254
KB16208
F960405
F180205
F310200
F040514
F040522
F320500
F220500
G0112040
G0116100
G311600
F180106
G311200
G331208
King Pin Mount
Clamp Plate
Spigot
Spacer Tube
Arm Spacer
Anti-Rotation Arm
Sensor
Positioning Element
Bearing 6008-2RS
Dowel Pin 1/4 x 5/8 in. Lg.
Socket Hd. Cap Sc. 10-24 x 1/2 in. Lg.
Lockwasher 3/16
Bolt 5/16 nc x 1 1/2 in. Hex Hd. Cap Sc.
Bolt 5/16 nc x 2 1/4 in. Hex Hd. Cap Sc.
Lockwasher 5/16
Jam Nut 5/16
Bolt M12 x 1.75 x 40mm Gr.8 Hex Hd. Cap Sc.
Bolt M16 x 2.0 x 100mm Gr.8 Hex Hd. Cap Sc.
Lockwasher M16
Bolt 8-32 x 3/4 Soc. Hd.
Lockwasher M12
Washer M12
1
2
1
4
1
1
1
1
1
1
2
2
2
1
2
2
4
4
4
1
4
4
19-Nov-13
4-12
22
55
14
22
5
8
69
1
7
11
24
3
2
66
55
11
24
41
4
34
17
39
23
19
31
15
42
42
4-13
ITEM
NO. PART NO.
DESCRIPTION
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
45
46
47
48
49
R300209
F040820
A101135
R100957
KE10254
F041230
F580206
F280200
H100045
F040606
F040812
H310051
R100956
F040814
M100158
F310608
F040606
KB20510
M100157
H310055
F040824
F210808
F040524
F310808
H310056
F040404
F310408
H310052
F040510
KM11400
H310064
H310039
F040612
F310608
KD91103
H310061
4160414
KH70108
H510012
KB16011
F211208
F210508
H110693
KC01002
F020820
F210808
KS60001
Spring Column Mount
Cylinder Mount
Spring Sensor Mounting Bracket
Sensor - Spring Column
Bolt-10 unc x 3/4 Pan Hd. Phil St. Stl.
Nyloc Nut-10 unc
Retainer Washer
Spring Column Weldment
Shaft-Spring Column
Jackshaft Coupling Bottom
Lockwasher 3/8 Gr.8
Bearing c/w Snap Ring
Jackshaft Coupling Top
Support Pivot - Ski Arm
Bolt 5/16 unc x 2 1/2 Gr.8
Lockwasher 1/2 Gr.8
Pivot Pin
Lockwasher 1/4 unc Gr8
Mounting Pivot - Shoe Arm
NOTE
Grease Fitting
Items 32, 33, 34, 35 & 36 are
Ski Arm Weldment
available as Ski Assembly H510012 Item 39.
Split Clamp Yoke
Lockwasher 3/8 Gr.8
Crosspiece c/w Bearings, Seals & Lube Fitting
Guide Shoe - Auto-Steer
Reset Cylinder (See Auto-Steer Hydraulic System for Fittings)
Seal Kit - Reset Cylinder
Ski Assembly
Rod End (MW12)
Chain - Shoe Arm Lift
Shackle
Nut 1/2 unc Gr.8
Bump Stop - Shoe Arm
20-Jan-13
1
2
1
1
1
1
2
2
1
1
3
1
1
2
1
1
3
2
1
1
1
5
6
3
1
1
1
1
3
2
1
1
1
5
1
1
1
1
1
1
1
6
1
2
1
1
1
4-14
22
55
14
22
5
8
69
1
7
11
24
3
2
66
55
11
24
41
4
34
17
39
23
19
31
15
42
42
4-15
ITEM
NO. PART NO.
DESCRIPTION
QTY
52
55
60
61
62
63
65
66
67
68
69
F320608
F330808
H111207
H111208
H111209
F940616
F221258
4130903
F310508
F230508
KE10306
Washer 1/2 Gr.8 sae Flat
Spring - See Note
Upper Spring Socket
Lower Spring Socket
Spring Pin 3/8 Dia. X 1 3/4 Lg.
Jam Nut 3/4-16
Spacer
Nut 5/16 unc Gr.8
Sensing Element
NOTE
Items 60, 61, 62 & 63 are
available as Torsion Spring
Assembly - H510199.
04-Feb-13
2
2
1
1
1
1
1
1
2
1
1
4-16
SECTION 5
ELECTRICAL
Wiring Diagram - Cab Harness. 4-Port Block MPF4. 8-Port Block MPF8.
Wiring Diagram - 8-Port Block MPR. 8-Port Block MPM.
Wiring Diagram - Controller C2 to HUB and Smart Cylinders
Circuit Breaker Mounting
E-Stop & Enclosure Assembly
Electrical Control Box – Non Current up to Serial No. 169
Cab Electrical Harness Assembly
Electrical Control Box – Current from Serial No. 170
Wheel Encoder Mounting
5-01
5-03
5-05
5-07
5-09
5-10
5-11
5-13
5-15
5-17
80A BREAKER SWITCH
6
3
4
1
2
5
F8 F4 M8 M4 R8
SYSTEM POWER 'ON'
AUTO-STEER
RELAY
MAIN ELECTRICAL
CONTROL BOX
E-STOP
CONTROLLERS
B, C & D
SEAT SWITCH
20
19
FAN RELAY
J1. TOP
CAN BUSS 1 & 2
30
J2. MID
CUTTER
SPEED
CONVEYOR
SPEED
6
COOLING FAN
22
15
21
23
30
J4. BOTTOM
J2
J1
J4
J3
24
J3. LOW
7
J1. AUTOSTEER
27
25
26
8
J2. AUTOSTEER.
CAB HARNESS
PALLET LIFT M4
30
11
J4. FAN
RELAY
J2
J1
J4
J3
10
NO.3 FRONT 4-PORT BLOCK F4
J3. TEMP.
SENSOR
28
13
J1. PRESSURE RELIEF
29
J4. CUT-OFF
J2. HEAD DOWN
J6. WORK LIGHT
18
16
12
9
J8. LIGHT
J2
J1
J4
J3
J6
J5
J8
J7
NO.1 FRONT 8-PORT BLOCK F8
17
J3. DOWN
PRESSURE
14
J7. AUTO-STEER
5-01
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
ELECTRICAL SYSTEM. Cab Harness, MPF4. & MPF8.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
R500021
R500043
KE80031
KE60139
KE60113
KE60147
R500054
KE60162
KE60115
R500117
KE60125
KE60122
KE60124
KE60160
KE60116
R500069
KE60107
R500069
KE60142
R500071
KE60142
KE60142
KE60142
KE60142
KE60121
KE60107
R500059
KE60149
A500229
4132981
Electrical Control Box - Full Assembly
Cab Harness
80A Breaker Switch
Cable. Electrical Control Box to Connector Block (MPF8)
Cable. Electrical Control Box to Connector Block (MPF4)
Cable. Electrical Control Box to Connector Block (MPM4)
Control Handle
Connector Block - Front Four Port Block (MPF4)
Connector Block - Front Eight Port Block (MPF8)
Cable. Connector Block J3. (MPF4) to Temp Sensor
Cable. Connector Block J4. (MPF4) to Fan Relay
Cable. Connector Block J1. (MPF8) to Pressure Relief
Cable. Connector Block J2. (MPF8) to 'Head Down'
Cable. Connector Block J3. (MPF8) to 'Down Pressure'
Connector Block - Middle Four Port Block (MPM4)
Cable. Connector Block J6. (MPF8) to Work Light
Cable. Connector Block J7. (MPF8) to Auto-Steer
Cable. Connector Block J8. (MPF8) to Work Light
Fan Relay
Cable. Cooling Fan to Fan Relay
Cable. Connector Block J1. (MPM4) to 'Top' Pallet Lift Sensor
Cable. Connector Block J2. (MPM4) to 'Mid' Pallet Lift Sensor
Cable. Connector Block J4. (MPM4) to 'Bottom' Pallet Lift Sensor
Cable. Connector Block J3. (MPM4) to 'Low' Pallet Lift Sensor
Control Knobs - Conveyor & Cutter Speed Assembly
Cable. Connector Block J4. (MPF8) to Cut-Off
15mm Sensing Range Proximity Sensor
15-Aug-13
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
5-02
TO HUB
ON ROBO ARM
SEE PAGE 5-12
TO CAB
HARNESS
7
5
TO TURN
CYLINDER
SEE PAGE 5-12
80A BREAKER SWITCH
9
TO PVG VALVES.
See page 5-13
1
F8 F4 M8 M4 R8
AUTO-STEER
RELAY
6
MAIN ELECTRICAL
CONTROL BOX
CONTROLLERS
B, C & D
2
E-STOP
OUTSIDE
FRONT
28
4
18
J3. CONVEYOR SPEED
8
10
13
J1. LIFT
PRESSURE SWITCH
27
11
14
J2. ROLL END SENSOR
16
J2
J1
J4
J3
J6
J5
J8
J7
J8. GATE CLOSED PSW
3
WHEEL
ENCODER
17
15
28
NO.2 RIGHT MID 8-PORT BLOCK M8
J5. INDEX
CONVEYOR
J7. GATE
OPEN
29
OPTIONAL DOUBLE
SIDED PALLET
INJECTOR ONLY.
29
J1. TRAY
'HOME'
22
20
J2. TRAY 'AWAY'
J4. LOAD ‘DOWN’
26
J6. DROP ‘DOWN’
J8. DISPENSER SAFE
27
19
12
J2
J1
J4
J3
J6
J5
J8
J7
24
NO.4 REAR 8-PORT BLOCK R8
28
25
J3. LOAD ‘UP’
21
J5. DROP ‘UP’
27
J7. WORK LIGHT
5-03
23
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
ELECTRICAL SYSTEM. 8 Port Block MPR. & MPM.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
R500021
KE70014
KE10228
R500070
4160172
KE60164
4160173
KE60126
KE60163
KE60110
KE60115
KE60115
KE60126
KE60126
KE60126
KE60129
KE60129
KE60126
KE60127
KE60125
KE60127
KE60142
KE60127
KE60127
KE60117
R500069
KE60127
A500229
A500228
4132981
Controller C2
Wheel Encoder
Emergency Stop Button Assembly
Cable. Electrical Control Box to Hub
Cable. Electrical Control Box to Wheel Encoder
Cable. Electrical Control Box to Turn Cylinder
Cable. Connector Block J4. (MPM) to Arm Emergency Stop Button
Cable. Electrical Control Box to Connector Block (MPR)
Cable. Electrical Control Box to Connector Block (MPM)
Connector Block - Middle Eight Port Block (MPM)
Connector Block - Rear Eight Port Block (MPR)
Cable. Connector Block J1. (MPM8) to Lift Pressure Switch
Cable. Connector Block J2. (MPM8) to Roll End Sensor
Cable. Connector Block J5. (MPM8) to Index Conveyor
Cable. Connector Block J8. (MPM8) to Gate 'Closed' PSW
Cable. Connector Block J7. (MPM8) to Gate 'Open'
Cable. Connector Block J3. (MPM8) to Conveyor Speed
Cable. Connector Block J1. (MPR8) to Tray 'Home'
Cable. Connector Block J2. (MPR8) to Tray 'Away'
Cable. Connector Block J3. (MPR8) to Load 'Up'
Cable. Connector Block J3. (MPR8) to Load 'Up'
Cable. Connector Block J4. (MPR8) to Load 'Down'
Cable. Connector Block J5. (MPR8) to Drop 'Up'
Cable. Connector Block J8. (MPR8) to Dispenser Safe
Cable. Connector Block J7. (MPR8) to Work Light
Cable. Connector Block J6. (MPR8) to Drop 'Down'
15-Aug-13
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
3
5-04
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
ELECTRICAL SYSTEM. Controller C2 to Hub & Smart Cylinders
1
2
3
4
5
6
7
8
R500021
KE70014
KE70014
KE70021
R500043
KE60156
KE60156
KE60158
KE60157
4160172
Controller B2
Controller C2
Controller D2
Cab Harness
Cable. Electrical Control Box to Turn 'Smart' Cylinder
Cable. Hub on Robotic Arm to Reach 'Smart' Cylinder
Cable. Hub on Robotic Arm to Lift 'Smart' Cylinder
Cable. Hub on Robotic Arm to Gripper 'Smart' Cylinder
Cable. Electrical Control Box to Hub on Robotic Arm
1
1
1
1
1
1
1
1
1
1
26-Jul-13
5-06
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
JOYSTICK CONTROL HANDLE
1
2
3
4
4A
5
5A
6
7
8
9
10
11
12
13
14
15
16
R500054
KE00002
KE00003
KE00004
KE00005
KE00019
KE00015
KE00007
KE00020
KE00009
KE00010
KE00011
KE00012
KE00013
KE00014
A300280
A300281
F210600
Joystick Control Handle Ass'y
Bushing - Control Handle
Grommet
Handle Case - L.H.
Handle Case - R.H.
Overlay - 8 Button
Face Plate
Leaf Spring
Trigger
Pin - Mounting
Screw - Switch Mounting
Screw - Handle Mounting
Switch - Momentary
Toggle Switch
Wiring Harness
Control Handle Mounting Plate
Control Handle Swivel Mount
Locknut 3/8 unc
1
1
1
1
1
1
1
1
1
1
10
3
4
1
1
1
1
1
5-08
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
ELECTRICAL BOX ASSEMBLY - NON CURRENT UP TO SERIAL NO. 169
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
R300032
Q8316
R100301
F310400
F010406
F320400
F040606
F310600
KM99016
F580206
F280200
KE70014
KE70014
KE70021
KE30046
KH99005
KE30051
35-067
T100949
KE80027
KE80030
KE30047
KE30043
R100869
Ref.
Electrical Control Box
Gasket
Inner Panel. Electrical Control Box
Lockwasher 1/4
Bolt 1/4-20 unc x 3/4 Gr.5
Flatwasher
Lockwasher 3/8
Draw Latch
Bolt #10-24 unc x 3/4 Pan Hd. Phil.
Locknut #10-24 unc
PLC Controller B
PLC Controller C
NOTE
PLC Controller D
PLC B, C & D Controllers are prePower Buss Plug
programmed. Do not install a controller
Drain
that is not identified as PLC B, C or D..
Plug 3 Pin - Male
Auto-Steer Relay
Power Buss Bar
Breaker 10 AMP
Relay
Mounting Bracket
12 Pin Socket
Mounting Bracket. Modified
Hole Plug
1
1
1
12
12
12
4
4
2
4
4
2
2
2
6
1
5
1
1
2
1
1
6
10
2
5-12
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
CAB ELECTRICAL HARNESS ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
R500021
R500043
KE70016
KE10231
R500059
KE10161
KE10162
R500054
KE80024
A500147
A101364
A101363
F040606
F310600
Electrical Box
Electrical Harness
Operating Screen
Dial
Dial Assembly
Beeper
Volume Control
System Power Switch
Emergency Stop Button
Screen Mounting
Stand Off. Screen Mounting
Lockwasher 3/8
1
1
1
1
1
1
1
1
1
1
1
2
4
4
8-Mar-12
5-14
30
29
28
27
26
25
9 8 7 6 5 4 3 2 1
24
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
ELECTRICAL BOX ASSEMBLY - CURRENT FROM SERIAL NO. 170
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
R300032
Q8316
R100301
F310400
F010406
F320400
F040606
F310600
KM99016
F580206
F280200
KE70014
KE70014
KE70021
KE30046
KH99005
KE30051
35-067
T100949
KE10243
KE80030
KE30047
KE30043
R100869
KE10086
R500142
R500141
R500140
R500139
R500138
R500137
R500136
Electrical Control Box
Gasket
Inner Panel. Electrical Control Box
Lockwasher 1/4
Bolt 1/4-20 unc x 3/4 Gr.5
Flatwasher
Lockwasher 3/8
Draw Latch
Bolt #10-24 unc x 3/4 Pan Hd. Phil.
Locknut #10-24 unc
PLC Controller B
PLC Controller C
NOTE
PLC Controller D
PLC B, C & D Controllers are prePower Buss Plug
programmed. Do not install a controller
Drain
that is not identified as PLC B, C or D..
Plug 3 Pin - Male
Auto-Steer Relay
Power Buss Bar
Fuse Holder
Relay
Mounting Bracket
12 Pin Socket
Mounting Bracket. Modified
15 AMP Fuse
Valve Cable #1
Valve Cable #2, #3 & #4
Valve Cable #5
Valve Cable #6
Valve Cable #7
Valve Cable #8
Valve Cable #9
21-Jan-13
1
1
1
12
12
12
4
4
2
4
4
2
2
2
6
1
5
1
1
1
1
1
6
10
2
1
3
1
1
1
1
1
5-16
4
10
20
19
18
11
17
13
2
8
16
7
3
5
7
9
6
15
19
15
14
12
NOTE
Items 1-20 are available as Flex Drive
Encoder Assembly - R500119.
5-17
1
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
WHEEL ENCODER ASSEMBLY - Current on Serial No. 214, 216 & Up
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
R100348
R100881
R100882
F180210
KB20505
F040674
F320600
F210600
F040406
F310200
KE10294
R100877
R100919
R100880
KM10064
F310408
R100920
F310000
F180008
R100921
Rear Wheel Encoder Mount
Encoder Mounting Plate
Encoder Clamp Plate
Screw 10-24 x 1.0 Lg. Soc. Hd. Cap
Bearing - Encoder Shaft
Bolt 3/8 unc x 7.5 Gr.8
Flatwasher 3/8
Locknut 3/8 unc
Lockwasher #10
Encoder
Wheel Encoder Shaft
Encoder Shaft
Encoder Flex Shaft
Lock Collar 7/16 ID
Lockwasher 1/4 Gr.8
Sensor Mount
Lockwasher #6
Screw 6-32 x .50 Lg. Soc. Hd. Cap.
Sensor Cover
1
1
1
4
1
4
8
4
3
4
1
1
1
1
4
3
1
3
10
1
NOTE
Items 1-20 are available as Flex Drive
Encoder Assembly - R500119.
17-Apr-14
5-18
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD
WHEEL ENCODER ASSEMBLY - Obsolete
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
R100348
R100881
R100882
R100883
KB20505
F040674
F320600
F210600
F040422
F210400
KE10228
R100877
R100878
R100880
KM10064
Rear Wheel Encoder Mount
Encoder Mounting Plate
Encoder Clamp Plate
Encoder Standoff Spacer - Obsolete
Bearing - Encoder Shaft
Bolt 3/8 unc x 7.5 Gr.8
Flatwasher 3/8
Locknut 3/8 unc
Bolt 1/4 unc x 2 1/4 Gr.8 - Obsolete
Locknut 1/4 unc - Obsolete
Encoder - Obsolete
Wheel Encoder Shaft
Encoder Shaft - Obsolete
Encoder Flex Shaft
Lock Collar 7/16 ID
1
1
1
4
1
4
8
4
4
4
1
1
1
1
4
11
10
13
4
2
8
7
9
3
5
7
15
6
15
14
NOTE
This Wheel Encoder Assembly
is Obsolete. See Page 5-17
& 5-18 for Current Assembly.
5-19
17-Apr-14
12
1
SECTION 6
ROBOTIC ARM & PALLET DISPENSER
Robotic Arm Assembly
Gripper Head Assembly
Pallet Dispenser Mounting
Pallet Dispenser Assembly
Robotic Arm Mounting
Piling Wall
Double Sided Pallet Injector Option – Rotator Assembly
Double Sided Pallet Injector Option – Piling Wall & Box
6-01
6-05
6-09
6-11
6-15
6-17
6-19
6-21
25
51
38
31
22
33
13a
2
39
18
38
24
11
49
43
35
5
LOCATION A
7
13b
16
2
17
13b
15
17
2
13a
39
45
46
47
39
48
2
29
23
10 21
6a or 6b
57
28
56
39
40
1
6a or 6b
1
61
40
38
1
31
40
51
19
60
30
38
45
5
62
63
59
40
A
51
1
54
55
56
32
26
4
38
3a or 3b
51
B
74
41
50
42 41
37
34 31 44
32
36
52
58
41
50 42
55
74
56
41
20
58
LOCATION B
8
72 73
64
14
9
75
66
65
71
68
76
67
73
6-01
77
70
71
27
12
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
ROBOTIC ARM ASSEMBLY
1
2
3a
3b
4
5
6a
6b
7
8
9
10
11
12
13a
13b
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
CM00121
CM00122
4160798
4160765
R300043
R300115
4129668
4160645
4129669
4136040
R300065
F310800
R300064
4160736
R300016
R300116
4134399
4160734
F080816
4160130
R100339
F840700
F840800
KB31019
55-FB22020SA
KB31024
KB32020
F870810
F021020
F210100
F040710
F041222
R100901
R100892
F041200
F041230
F041280
F310700
F201250
4160737
F210705
6415262
R500153
R500154
KH70116
R500015
KH70115
F211200
F221218
F221200
4134564
Rod End 3/4 in.
Rod End 3/4 in. L.H.
Reach Arm - Euro
Reach Arm - Standard
Lift Arm - Non Current up to Serial No. 176
Lift Arm - Current from Serial No. 177
Linkage. Lift
NOTE
Linkage. Reach - Long - Euro
Linkage. Reach - Short - Standard
Items 3, 45, 46, 47 & 48 are
Spacer
available as Reach Arm
Pivot Head
Assembly - R500079.
Lockwasher 1/2
Pivot Linkage Elbow
Spacer. Lift Linkage
Main Pivot Arm - Non Current up to Serial No. 176
Main Pivot Arm - Current from Serial No. 177
Linkage Spacer - Short
NOTE
Linkage Spacer - Long
Bolt 1/2-20 x 1 3/4
Obsolete Item 19, Non
Wireform - 4 in. Dia.
Current Item 53 and Item 34
Pivot Linkage Elbow
are replaced and availabe as
Nut 7/16 unc Serrated
Reach Arm Bearing Kit R500145.
Nut 1/2 unc Serrated
Bearing. 4 Bolt - 1 1/4 in.
Consiting of:
Bearing. 4 Bolt - 1 1/4 in. - Obsolete
KB31019 - Item 19 - Qty.1
F670502 - Item 59 - Qty. 1
R101103 - Item 60 - Qty. 1
Bolt 1/2 unc x 1 Flanged
F030720 - Item 62 - Qty. 4
F210700 - Item 63 - Qty. 4
Nut #8-32 Nyloc
F310700 - Item 31 - Qty. 4
F330700 - Item 61 - Qty. 4
Lower Cylinder Bolt - Non Current up to Serial No. 176
Lower Pin. Lift Cylinder - Current from Serial No. 177
NOTE
Items 4, 12, 27, 54 & 55 are
Lockwasher 7/16
available as Replacement
JD Arm & Base 1.00 Lift
Bracket. Can Buss Junction
Cylinder Pins - R500087.
Locknut 7/16 unc
Bolt #8-32 x 1 1/4
Cylinder. 2 1/2 in. Bore 1 1/4 in. Rod (for 1 in. dia. Bolts)
Cylinder. 2 1/2 in. Bore 1 1/4 in. Rod (for .75 in. dia. Bolts)
Seal Kit
Cylinder. 2 in. Bore 1 in. Rod
NOTE
Seal Kit
Locknut 3/4 unc
Items 41 (2x), 42 & 50 are required
Jam Nut 3/4 L.H.
for the .75 in. dia. Bolts on the Non
Jam Nut 3/4 R.H.
Current Lift Arm - R300043.
Thrust Washer
30-Jan-13
4
4
1
1
1
1
2
2
2
1
1
8
1
1
1
1
2
2
2
1
1
1
1
2
2
2
2
1
4
2
1
2
1
1
1
1
1
17
1
1
8
2
1
1
1
1
1
5
4
4
4
6-02
25
51
38
31
22
33
13a
2
39
18
38
24
11
49
43
35
5
LOCATION A
7
13b
16
2
17
13b
15
17
2
13a
39
45
46
47
39
48
2
29
23
10 21
6a or 6b
57
28
56
39
40
1
6a or 6b
1
61
40
38
1
31
40
51
19
60
30
38
45
5
62
63
59
40
A
51
1
54
55
56
32
26
4
38
3a or 3b
51
B
74
41
50
42 41
37
34 31 44
32
36
52
58
41
50 42
55
74
56
41
20
58
LOCATION B
8
72 73
64
14
9
75
66
65
71
68
76
67
73
6-03
77
70
71
27
12
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
ROBOTIC ARM ASSEMBLY
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
KB51610
4160177
55-FB22016
R100333
F925512
F220608
F110606
R100799
4133645
F311200
F020718
F030716
R100891
F211600
F211008
F311008
4160735
F670502
R101103
F330700
F030720
F210700
R101110
R101111
R101112
R101115
KM60032
F040526
F040532
F210508
F310508
F320508
KB12828
F040510
R300223
R101265
Bearing. Needle Roller
Junction Box
Bearing. 4 Bolt - 1 in.
NOTE
Reach Arm Pin
Items 3, 45, 46, 47 & 48 are
Key 5/16 x 5/16 x 1 1/4
available as Reach Arm
Jam Nut 3/8 unc
Assembly - R500079.
Hose Hook Stiffener
Bearing Sleeve
Lockwasher 3/4
Bolt 7/16 unc x 1 5/8 Full Thread - Non Current
Upper Pin. Lift Cylinder - Current from Serial No. 177
Nut - 1 unc Nyloc - Current from Serial No. 177
Locknut 5/8 unc
NOTE
Split Lockwasher 5/8
Spacer
Items 4, 12, 27, 54 & 55 are
available as Replacement JD
Set Screw 5/16 unf x 1/4
Arm & Base 1.00 Lift
Reach Arm Bearing Shim
Cylinder Pins - R500087.
Flat Washer 7/16 sae
Hex Bolt 7/16 unc x 2
Locknut 7/16 unc
Hose Clamp Support Bar
NOTE
Arm Hose Clamp Centre
Items 64 to 77 are available
Arm Hose Clamp Outer
as Robo Arm Hose Clamp
Hose Wrap
Retrofit Kit - R500148.
M8 Series Mag Clamp 74-78
Bolt 5/16 unc x 2 3/4 Gr.8 - Obsolete
Bolt 5/16 unc x 3 1/4 Gr.8
Flatwasher 5/16 uss Gr.8
Bushing 1.00 I.D. x 1.50 O.D. x 1.00 lg.
NOTE
Hose Clamp Stand Off
Hose Clamp Top Plate
Obsolete Item 19, Non Current
Item 53 and Item 34 are
replaced and availabe as Reach
NOTE
Arm Bearing Kit - R500145.
Items 41 (2x), 42 & 50 are required
Consiting of:
for the .75 in. dia. Bolts on the Non
KB31019 - Item 19 - Qty.1
Current Lift Arm - R300043.
F670502 - Item 59 - Qty. 1
R101103 - Item 60 - Qty. 1
NOTE
F030720 - Item 62 - Qty. 4
F210700 - Item 63 - Qty. 4
Hose Sleeve 1 5/8 I.D. - Q8506
F310700 - Item 31 - Qty. 4
F330700 - Item 61 - Qty. 4
23-May-14
2
1
2
1
1
2
2
1
2
2
8
8
1
2
4
4
2
2
2
8
8
8
1
1
2
3
3
1
3
5
1
6
2
3
1
1
6-04
40
1
32
17
50
52
35
23
11
12
51
39
41
16
20
41
14
34
11
14
46
42
45
40 42 12
45
46 39
39
34
35
37 36
35
1
22
36
40
1
37
29
48
35
44
38
33
25
25
7
24
34
4
7
11
13
33
5
24
44
19
45
12
12
45 46
41 14
9a
9a
40
6a
3
28
26
13 44
39
9a
9a
28 2
1
21
10a
13
39
28
41
11
3
5
46
15
34
39
49
27
41
10a
3
40
44
13
40
6a
18
17
11
12
41
1
32
11
9a
9a
3
12
14 45
46
4
19
45 46
34
15
33
SEE NOTE 2
9b
43
53
9a
33
33
3
9a
6a
10a
9a
10a
31
31
9a
10b
3
6b
9b 54
31
9a
39
3
21
8
18
54
ITEMS 6b, 9b &10b SHOULD BE ORDERED
FOR THE NEW STYLE GRIPPER TONG
ASSEMBLY WITH KEYWAY.
6-05
5
9a
33
5
3
15
44
32
33
33
40
6a 43
43
ITEM
NO. PART NO.
DESCRIPTION
ROBOMAX JOHN DEERE
QTY
GRIPPER HEAD ASSEMBLY
1
2
3
4
5
6a
6b
7
8
9a
9b
10a
10b
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
48
49
4128723
4128874
4128914
F040630
4129300
4128968
R100955
4129259
4129241
4135961
R300139
4135960
R300140
4128925
F220608
4128942
4160364
4128917
4142710
4129294
4132920
4160365
4160053
4132724
4137484
R300044
4128981
4128982
38304-04
4129317
4129315
4132819
F040420
F870904
F870606
F210612
F870816
F040664
F330608
F040612
F040610
F210608
F040614
F840600
F210408
F815125
F220660
4160363
4160411
6417602
Cylinder. Face Mount
Cylinder
Pillow Block
Plate. Frame
Shaft. Pivot - Non Current
Shaft. Pivot (w/keyway) - Current
Shaft. Guide
Spacer
Grasping Tong - Non Current
Grasping Tong (w/keyway) - Current
Grasping Tong/Nut - Non Current
Grasping Tong/Nut (w/keyway) - Current
Rod End. 3/8 in. Male R.H.
Jam Nut 3/8 unc R.H.
Bearing Sleeve
NOTE 1
Adjusting Link - Grasping Tong
Items 11, 12, 14, 45 & 46 are
Block. Guide
available as Pivot Bracket. Gripper
Adjusting
Link Assembly
Bracket. Cylinder Mount
Grasping
Tong
- 4160589.
Roll Bracket
Adjusting Link - Gripper Squeeze
Tube. Frame
Plate. Link
Gripper Head Bracket
Cylinder Mount
Block-V-Lower
Block-V-Upper
Bearing. Flanged Plastic
Spacer
Cylinder Link Plate
Head Plate
Bolt 1/4 unc x 2 Gr.8 - Non Current
Bolt 3/8 x 1/2. Flanged
Bolt 3/8 x 3/4. Flanged
Nut 3/8. Flanged - Stover
Bolt 3/8 x 1 3/4. Flanged
Flatwasher 3/8
Locknut 3/8 unc
Nut 3/8 unc
Locknut 1/4 unc - Non Current
Internal Retaining Ring
Jam Nut 3/8 unc L.H.
Rod End. 3/8 in. Male L.H.
Hose Ring Support
Roll Pin 1/4 x 1 1/2
Items 11, 12, 19, 45 & 46 are
available as Adjusting Link Assembly
Grasping Squeeze - 4160588.
NOTE 2
Items 6b, 9b, 10b, 53 & 54 are
available as Retrofit Gripper Tong
Assembly - R500098.
25-Jul-13
5
1
20
2
10
10
10
2
2
30
30
10
10
14
14
16
12
8
5
4
5
2
2
4
1
1
2
2
4
2
4
1
48
16
56
20
16
4
4
2
22
29
23
10
48
16
14
14
1
2
6-06
40
1
32
17
50
52
35
23
11
12
51
39
41
16
20
41
14
34
11
14
46
42
45
40 42 12
45
46 39
39
34
35
37 36
35
1
22
36
40
1
37
29
48
35
44
38
33
25
25
7
24
34
4
7
11
13
33
5
24
44
19
45
12
12
45 46
41 14
9a
9a
40
6a
3
28
26
13 44
39
9a
9a
28 2
1
21
10a
13
39
28
41
11
3
5
46
15
34
39
49
27
41
10a
3
40
44
13
40
6a
18
17
11
12
41
1
32
11
9a
9a
3
12
14 45
46
4
19
45 46
34
15
33
SEE NOTE 2
9b
43
53
9a
33
33
3
9a
6a
10a
9a
10a
31
31
9a
10b
3
6b
9b 54
31
9a
39
3
21
8
18
54
ITEMS 6b, 9b &10b SHOULD BE ORDERED
FOR THE NEW STYLE GRIPPER TONG
ASSEMBLY WITH KEYWAY.
6-07
5
9a
33
5
3
15
44
32
33
33
40
6a 43
43
ITEM
NO. PART NO.
DESCRIPTION
ROBOMAX JOHN DEERE
QTY
GRIPPER HEAD ASSEMBLY
50
51
52
53
54
F501230
KB11216
R100325
F923312
F870512
Shoulder Bolt
Inner Bearing
Turn Cylinder Mount
Key 3/16 x 3/16 x 1 1/4 - Current
Serrated Hex Flange Bolt 5/16 x 1 1/4 Gr.5 - Current
2
2
1
40
40
NOTE
Items 11, 12, 14, 45 & 46 are
Grasping Tong - 4160589.
Items 11, 12, 19, 45 & 46 are
Grasping Squeeze - 4160588.
NOTE 2
Items 6b, 9b, 10b, 53 & 54 are
available as Retrofit Gripper Tong
Assembly - R500098.
25-Jul-13
6-08
29
31
30
8
15
14
14 8
20
19
21
1
10
2
12
23
7
28
9
14
22
20
24
9
14
6
4
26
10
3
12
7
27
2
5
11
18
10
12
25
16
10
12
6-09
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
PALLET DISPENSER MOUNTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
R300036
4133659
4135022
F040524
R300052
F210508
F041022
F040820
F040816
F331008
F210812
F211012
F210608
F320800
R100284
F041024
F211000
F041026
F160145
F870606
F160218
F160147
F870406
F870400
4133657
R100323
F040814
4160149
4160146
F870406
KM11400
Mount. Pallet Dispenser
Bearing
Hose Clamp. 3/4 O.D.
Bolt 5/16 unc x 2 1/2 Gr.8
Locknut 5/16 unc
Washer 5/8 sae
Locknut 1/2 unc. Stover Flanged
Locknut 5/8 unc. Stover Flanged
Locknut 3/8 unc
Flatwasher 1/2
Piling Wall Extension Bracket
Locknut 5/8 unc
Hinge Pin
Draw Latch
Latch Bracket
Rivet Nut 1/4 unc
Actuator
Bar Mount
Piling Wall Extension
Hinge Block
Grease Fitting
1
2
1
1
1
1
4
2
5
8
7
8
2
7
1
2
2
2
2
6
1
1
2
2
1
2
4
1
2
4
2
16-Apr-12
6-10
27
1
36
27
34
35
25
32
33
56
54
30
22
53
52
57
4
26
26
3
33
22 32
22
11
9
10
12 9
10
7
12
8
7
9
11
11
13 51
14
58
38
29
42
37
30
39
21
26
33
48 19
10 12
49
12
50
47
46
49
19
48
41
16
29
32
33
40
31
14
22
26
9
11 10
5
15
24
18 49
44
43
6
25
4
21
28
2
18
29
26
32
19
20 10
11
12
23
9
12 10 9
7 55
11
40
51
8
17
9
14
5
6-11
3 23
26
45
15
13
55
11
59
7 12 10
12
10
32
9
23
11
55
32
24
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
PALLET DISPENSER ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
4160426
4139140
4138353
4138354
4134118
4133657
4133802
4136786
F940116
38020-01
KX00612
F230658
4136870
F331208
64163-73
F041210
F211208
F040612
F210608
F041026
F211012
4136042
4136043
4137551
4137552
F020516
4134551
F041030
F331008
F210808
F040816
64273-01
64152-65
4133793
F040416
F210408
4133659
F041022
4160121
64144-36
F210600
4138481
4139860
F020520
R300052
4160283
4160307
F040606
F320600
4160311
4136835
Pallet Dispenser Weldment
Bottom Weldment
Rear Paddles
Front Paddles
Cylinder
Actuator
Link-Arm - Actuator
Bellcrank
Hitch Pin Clip
Clevis Yoke
Clevis Pin
Nut 3/8 unf
Shoulder Screw
Washer 3/4 sae
Washer 5/8 Steel Shim Washer
Locknut 3/4 unc
Lockwasher 3/8
Stover Flange Nut 5/8 unc Gr.5
Block Bar Support
Block Bar Support
S-Plate. Smooth Surface
Pallet Sod Guide Plate
Caplugs 1 x 2
Washer 5/8 sae
Nut. Low Profile
Screw 5/16 x 1 1/4
Pivot Pin
Locknut 1/4 unc
Bearing
Transport Bracket
Snap Ring
Locknut 3/8 unc
Collar - Clamp
Pallet Slide Bracket
Latch - Secondary
Receiver - Secondary Latch
Flatwasher 3/8
Sensor Bracket. Pallet Dispenser
Bushing Bronze 3/4 Id
31-May-12
1
1
2
2
2
1
4
2
8
8
8
8
2
4
4
1
1
8
10
2
8
8
8
2
2
20
2
2
8
4
2
24
8
2
2
2
2
4
1
4
2
2
2
4
1
1
1
2
4
1
2
6-12
27
1
36
27
34
35
25
32
33
56
54
30
22
53
52
57
4
26
26
3
33
22 32
22
11
9
10
12 9
10
7
12
8
7
9
11
11
13 51
14
58
38
29
42
37
30
39
21
26
33
48 19
10 12
49
12
50
47
46
49
19
48
41
16
29
32
33
40
31
14
22
26
9
11 10
5
15
24
18 49
44
43
6
25
4
21
28
2
18
29
26
32
19
20 10
11
12
23
9
12 10 9
7 55
11
40
51
8
17
9
14
5
6-13
3 23
26
45
15
13
55
11
59
7 12 10
12
10
32
9
23
11
55
32
24
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
PALLET DISPENSER ASSEMBLY
52
53
54
55
56
57
58
59
4160102
F020814
F330808
F320508
F040226
F211208
A300208
R300224
Holder Bracket
Flat Washer 1/2 sae Gr.8
Flat Washer 5/16 Gr.8
Bolt 3/4-10 x 2 3/4
Sensor Flag
Sensor Flag
2
2
2
6
1
1
1
1
26-Jul-13
6-14
1
2
3
4
9
11
5
10
18
12
13
25
1
8
31
14
34
19
21
22
23
7
16
15 17
32
6
26
24
7
16
17
29
30
7
7
7
17
16
27
28
31
32
20
6-15
33
30
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
ROBOTIC ARM MOUNTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
4160136
4160107
4160108
B4511
B4018
F221000
4134564
F141004
KM60027
218307103
F870414
KM60027
F840400
KH68007
R500013
KH70115
4133645
KB51610
F211258
B4017
F121216
B4514
4160109
4160123
F201234
F331208
4160624
F080824
KB50004
R500012
KH70114
KB11216
F501230
KB12815
R300037
F040836
Locknut
Lockwasher
Tongued Washer
Bearing - Cone
Bearing - Cup
Jamnut 5/8 unc
Thrust Bearing
Set Screw 5/8 x 1/2
Hose Clamp #40
Spacer
Bolt 1/4 unc x 1 1/4 Flanged
Hose Clamp #5
Flanged Nut 1/4 in. Serrated
Clamp 3/4 in. Clip
Cylinder. 2 in. Bore 1 in Rod
Seal Kit.
Inner Sleeve
Needle Bearing 1 in. ID
Locknut 3/4 unc
Bearing - Cup
Bolt 3/4 unc x 1 3/4 Soc. Hd.
Bearing - Cone
Spacer
Seal
Washer 3/4
Spindle Nut Socket
Slewing Ring
Cylinder. 1 1/2 in. Bore 1 in. Rod
Repair Kit
Bushing
Bolt 3/4 x 3. Shoulder
Bushing
Turn Cylinder Mount
2
1
1
1
1
1
6
1
1
1
1
2
1
3
1
1
3
2
1
1
2
1
1
1
1
2
A/R
20
1
1
1
2
2
2
1
20
31-May-12
6-16
7
2
11
14
22
17
3
21
9
8
13
21
23
20
12
19
15
10
16
1
18
3
4
5
6
6-17
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
PILING WALL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
4160149
4160316
F870606
4160218
F870406
F840400
4160315
4160111
CM00121
CM00122
4160146
F231260
F231250
F040226
F211208
F040816
KX08150
KX30219
4160102
F020814
F210808
F330808
4160121
Piling Wall Extension
Hinge Block
Draw Latch
Nut 1/4 unc Flanged
Piling Wall Guide
Tie Rod 37 1/2 in.
Rod End - R.H. 3/4 in.
Rod End - L.H. 3/4 in.
Hinge Block
Jam Nut 3/4 unf L.H.
Jam Nut 3/4 unf R.H.
Bolt 3/4-10 x 2 3/4
Clevis Pin
Lynch Pin
Holding Bracket
Transport Bracket
1
2
12
1
2
2
1
1
1
1
2
1
1
1
1
2
1
1
1
2
4
2
1
4-May-12
6-18
41
43
16
29
22
34
36
35
40
23
34
39
6-19
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
DOUBLE SIDED PALLET INJECTOR OPTION - ROTATOR ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
26
27
28
29
30
31
32
33
34
35
36
38
39
40
41
42
R300088
R300104
R300123
R300090
R300091
R300098
R300096
GR30571
R300106
KH31009
KH31008
R100868
KH64020
KH63010
R100763
R100661
H301041
R100800
KB10010
KH65006
KH63004
F211000
F041016
F210808
F040510
F210508
F310600
F840600
F0416110
F211600
F040612
F040442
F320500
F310500
F040506
F040516
KX90032
F230800
KX07042
F550406
Pallet Rotator
Rotary Actuator Mount
Pallet Pusher Frame
Pallet Push Bar
Pallet Push Bar
Pallet Guide
Pivot Pin - 3.625 Lg.
Pivot Pin - 3.00 Lg.
Slider Holder
Rotary Actuator
Cylinder
Proximity Cover
Clamps
Cover Plate
Rotary Proximity Target
Euro Pallet Slider
'T' Bolt
Slider Holder Spacer
Comination Bearing Roller
Clamps
Cover Plate
Locknut 5/8 unc
Bolt 5/8 x 1 3/4 Gr.8
Locknut 1/2-13
Bolt 5/16 unc x 1
Locknut 5/16 unc
Lockwasher 3/8
Nut 3/8 unc - Serrated Flange
Bolt 1 unc x 11 Gr.8
Locknut 1 unc
Flatwasher 5/16
Lockwasher 5/16
Bolt 5/16 unc x 1 3/4
Grease Fitting M6-1.0
Nut 1/2 unc
T-Handle Pin - 1/4 x 2
Bolt 1/4 unc x 3/4 Flat Hd.
1
1
1
1
1
2
1
1
2
1
1
1
2
1
2
6
6
4
4
2
1
4
4
6
2
4
8
10
1
1
8
2
6
4
4
1
4
6
2
4
1-Jun-12
6-20
46
A
45
69
65
71
45
70
16
72
67
68
27
56
37
74
75
2
73
DETAIL A
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
DOUBLE SIDED PALLET INJECTOR OPTION - BOX & PILING WALL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
R500027
R300093
KB30020
R100694
R300094
R300099
R300100
R100711
R300102
R300103
R100722
F221250
F221260
CM00121
CM00122
R100773
R300085
4136042
4138354
R300110
4137551
4134118
R100797
R100796
R100795
R100323
4160315
38020-01
R100798
F230658
R300092
R300109
R100742
R100687
R100775
R300111
R100786
R100724
4160316
4136786
A300208
F020516
64273-01
F040612
F320600
F210600
F550410
F210400
F040712
64152-65
6416373
Main Beam Sub-Assembly
Double Sided Pallet Dispenser Mount
Pillow Block Bearing
Bearing Spacer
Main Pin - 2 in.
Piling Wall
Piling Wall Hinge
Wall Strut 'A'
Wall Strut 'B'
Tie Rod Transport Mount
Tie Rod
Nut 3/4 unf
Nut 3/4 unf L.H.
Rod End - 3/4 unf Male R.H.
Rod End - 3/4 unf Male L.H.
Mounting Brace - Box Side
Double Sided Pallet Box
Upper Block Bar Support
Dispenser Paddles
Dispenser Paddles
Pallet Sod Guide Plate
Cylinder
Tie Rod - 21.75 in.
Tie Rod - 13.75 in.
Tie Rod - 5.5 in.
Bar Mount
Pallet Guide
Clevis Yoke
Bent Clevis Yoke
Nut 3/8 unf
False Wall
False Wall Flapper
False Wall Flap Bar Support
Strap Bar
'V' Slider Mount
Flat Slider Mount
False Wall Slider Bearing
False Wall Link
Hinge Block
Bellcrank
Proximity Target
Nut 5/16 unc - Low Profile
Flatwasher 3/8
Locknut 3/8 unc
Bolt 1/4 unc x 1 Phil. St. Stl.
Locknut 1/4 unc
Bolt 7/16 unc x 1 1/2 Gr.8
Screw 5/16 x 1 1/4 Pan Hd.
Washer 5/8
1-Jun-12
1
1
2
2
2
1
2
2
2
1
1
1
1
1
1
1
1
8
1
1
2
1
2
1
1
2
1
6
2
8
1
1
4
4
1
1
3
4
2
1
1
24
24
4
12
8
6
6
8
8
2
6-22
46
A
45
69
65
71
45
70
16
72
67
68
27
56
37
74
75
2
73
DETAIL A
6-23
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
DOUBLE SIDED PALLET INJECTOR OPTION - BOX & PILING WALL
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
64144-36
F331208
4136870
KX00612
F940116
KM11400
F870606
KH65004
KH65005
KH65006
KH63004
KH63005
F040512
F040516
F040530
R100772
F210708
R300117
F040632
F041020
F041024
F331008
F211012
F041224
F221200
F211200
Snap Ring 5/8
Washer 3/4
Shoulder Screw 3/4 x 1 1/4 - 5/8 Thread
Clevis Pin 3/8
Hitch Pin Clip
Grease Fitting
Flanged Bolt 3/8 unc x 3/4 Gr.5
Hose Clamp 1/2
Hose Clamp 5/8
Hose Clamp 3/4
Cover Plate
Cover Plate
Bolt 5/16 unc x 1 1/4 Gr.8
Bolt 5/16 unc x 1 3/4 Gr.8
Mounting Brace
Locknut 7/16 unc
Catcher
Bolt 3/8 unc x 2
Washer 5/8 sae Gr.8
Nut 5/8 Stover Flange
Stop Bolt 3/4 unc x 2 1/2 Gr.8
Jam Nut 3/4 unc
Locknut 3/4 unc
2
2
1
4
4
2
4
6
6
4
3
4
4
1
2
1
8
1
4
5
2
7
7
1
1
1
19-Oct-12
6-24
SECTION 7
HARVESTER & TRACTOR FRAME
Pallet Lift Forks Assembly
Rear Gate Assembly
7-01
7-03
47
To Tractor Axle
45
46
18
40
44
43
42
40
18
29
28
41
29
28
3
1
30
22
2
5
6
22
26
17
37
19
7
38
16
4
20
1
32
22
14-15
5
22
2
13
8
40
27
25
21
24
31
11
10
33
34
30
31
23
12
33
35
38
36
38
7
7
36
9
7-01
22
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
PALLET LIFT ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
KB10001
4160117
4160104
F041030
202779
4129416
F310608
4160103
R100980
4139411
4130663
4130668
4140748
F210600
4132569
4160105
4132663
F321008
4132981
F040614
4133017
F040814
G0420065
05-042
4137205
F310808
55-CYR-2-S
F870606
G312000
G322008
F221050
F311200
F211000
F041226
F041244
F211212
F040610
F040630
F330608
F910306
G321208
G0420045
F040510
F310508
F320500
KM11492
KH01329
Q8563
Combination Bearing
Bolt. Chain Anchor
Roller Plate L.H.
Clevis Pin. Lift Chain
Sheave
Lockwasher. Helical 3/8
Roller Plate R.H.
Forks - 7 in. wide - Current
Forks (Optional)
Flag
Forks Mount
Cover. Forks
Locknut 3/8 unc
Cylinder - Pallet Lift
Repair Kit. Pallet Lift Cylinder
Spacer Bushing
Flatwasher 5/8 Gr.8
Sensor. Inductive 4mm
Chain - 28.12 in. Pallet Lift
Bolt M20 x 2.5 x 65
Isolator
Centering Bars
Bearing. 2 in. OD x 5/8 ID
Lockwasher M20
Flatwasher M20
Jam Nut 5/8
Locknut 5/8 unc
Flanged Nut 3/4 unc
Flatwasher 3/8
Cotter Pin 3/32 x 3/4
Flatwasher 12mm
Bolt M20 x 2.5 x 45
Bolt 5/16-18 x 1 in
Flatwasher 5/16
Grease Fitting 1/8 NPTF
Compression Fitting 90 deg.
Tube 1/4 x 31 in.
4
4
1
2
4
2
8
1
2
2
1
1
1
8
2
A/R
4
4
4
8
2
4
4
1
2
4
2
2
12
12
8
8
2
8
4
4
4
4
4
8
8
8
9
9
9
2
4
2
01-May-14
7-02
7-03
d
an
ar
1-2
23
AT
D00
nin
g.
EA
AR
ut
w
ho
TH
IS
wit
OF
clo
se
KE
AL EP
W
GatL T EL
IM L
e ca
E C
n S. LE
op
AR
en
1
15
21
20
9
18
10
23
10
8
7
6
5
12 13
24
22
2
19
11
23
16
14
15
25
3
2
17
25
17
4
ITEM
NO. PART NO.
DESCRIPTION
QTY
ROBOMAX JOHN DEERE
REAR GATE ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4160468
R300048
R300031
R100481
F040406
F310408
F320408
4160566
4160467
KB11614
F870606
F040626
F320608
F040830
F210808
4160565
17
18
19
20
21
22
23
24
25
R100480
KB03080
R100495
F040634
F040822
4132981
G321200
F230808
F210608
Rear Gate
Mount. Rear Gate
Piling Wall
Spacer. Piling Wall - Front
Washer 1/4 Gr.8 uss Structural
Stand-Off
Hinge Pin
Bushing
Bolt 3/8 x 3/4 Ser. Flg.
Flatwasher 3/8 Gr.8
Cylinder - Rear Gate
Seal Kit - Rear Gate Cylinder
Spacer. Piling Wall - Rear
Rod End
Spacer
Proximity Sensor
Flatwasher M12
Jamnut 1/2 unc Gr.8
1
1
1
2
2
2
2
2
2
4
4
2
8
1
1
1
1
A/R
1
4
2
1
1
2
1
4
1-Jun-12
7-04
SECTION 8
OPTIONS & ACCESSORIES
Safety Decals – John Deere 6230 & 6330
Decals – John Deere 6105 & 6115
8-01
8-07
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD - SAFETY DECALS
1
2
3
4
5
6
7
8
D001-221
D001-223
4135015
00-226
D001-032
4135014
4135016
4135181
Decal - "Caution - Lubricate Slewing Ring…"
Decal - "Warning - Keep Clear of Area…"
Decal - "Warning - Robot Arm Can Crush…"
Decal - Oil Daily
Decal - "Warning - Crushing Hazard…"
Decal - "Warning - Machine Can Crush…"
Decal - "Warning" Crushing Hazard
1
1
2
1
1
2
2
1
8-02
ITEM
NO. PART NO.
DESCRIPTION
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
D001-099
00-370
006204
D001-054
D001-022
D001-012
009097
015900
D001-116
D001-136
D001-053
D001-066
D001-128
D001-129
Decal - "Caution - Before Working on the Cut-Off…"
Decal - "Warning - Keep All Shields In Place…"
Decal - "Caution - System Under Pressure…"
Decal - Hydraulic Oil
Decal - "Warning - High Pressure Fluid Hazard..."
Decal - "Warning - Keep Clear of Cutting Head…"
Decal - "Warning - Keep Clear of Conveyor…"
Decal - "Caution - Do not step on Conveyor…"
Decal - "Important - The Cylinder Lock is to be used…"
Decal - "Caution - Hot Exhaust…"
Decal - "Warning - Hold Actuator Lever…"
Decal - Emergency Stop Button
Decal - "Warning - Push to Activate…"
1
2
1
2
1
1
1
1
1
1
1
1
1
1
8-04
ITEM
NO. PART NO.
DESCRIPTION
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
2000653
D001-136
D001-033
015499
4133093
D001-184
D001-202
D001-024
4136687
D001-032
D001-222
D001-210
D001-228
D001-223
Decal - "Warning - Read Operator's Manual"
Decal - "Important - Cylinder Lock is to be used…"
Decal - "Warning - To Prevent Serious Injury…"
Decal - "Caution - Avoid injuries, Engage Auto-Steer..."
Decal - "Warning - Read Operator's Manual…"
Decal - "Caution - To protect both the Automotive…"
Decal - Cutter Head Controls
Decal - "Warning - No Riders…"
Decal - "Warning - Pallet Dispenser Can Crush…"
Decal - "Warning - Read the Safety Warnings…"
Decal - Robotic Arm Axis
Decal - Control Handle
Decal - "Warning - Keep Well Clear…"
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8-06
1
4
2
00-370
15
3
14
00-266
13
D001-054
D001-162
4
D001-162
00-266
11
D001-211
12
D001-054
00-266
11
4
00-226
10
7
015900
4136687
5
9
8
6
7
6
8-07
ITEM
NO. PART NO.
DESCRIPTION
QTY
RoboMax JD 6105 & 6115 - DECALS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
D001-221
D001-370
4135015
00-226
D001-032
4135014
4135016
4135181
4136687
015900
D001-054
D001-211
D001-162
00-266
D001-250
Decal - "Caution - Slewing Ring…"
Decal - "Warning - Keep All Shields in Place…"
Decal - Oil Daily
Decal - "Warning - Machine Can Crush…"
Decal - "Warning - Crushing Hazard
Decal - "Warning - Pallet Dispenser Can Crush..."
Decal - "Warning - Keep Clear..."
Decal - RoboMax JD Logo
Decal - Brouwer Logo - 16 in.
Decal - "Warning - No Riders..."
Decal - "Caution - Lube Daily - Slewing Ring…"
2
1
2
3
1
3
2
1
2
2
2
1
2
1
2
8-08
5
3
11
6
9
12
15
18
16
D001-162
D001-162
D001-211
00-074
D001-187
13
D001-247
14
19
26
4
015777
015777
25
D001-181
21
9
D001-161
16
17
1
00-369
00-280
8
20
27
D001-162
D001-162
4135178
22
4135178
00-264
23
STOP ENGINE BEFORE
ATTEMPTING INSPECTION,
CLEANING, OR ADJUSTMENT.
00-283
00-283
00-282
2
28
10
8-09
24
7
4
00-226
ITEM
NO. PART NO.
DESCRIPTION
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
D001-099
00-370
006204
D001-054
D001-022
D001-012
009097
015900
D001-116
D001-136
D001-053
D001-187
D001-128
D001-129
D001-211
D001-162
D001-161
00-074
D001-247
00-280
00-369
4135178
00-280
00-226
D001-181
015777
00-267
00-282
Decal - "Caution - Before Working on the Cut-Off…"
Decal - "Caution - System Under Pressure…"
Decal - "Warning - High Pressure Fluid Hazard..."
Decal - "Warning - Keep Clear of Cutting Head…"
Decal - "Warning - Keep Clear of Conveyor…"
Decal - "Caution - Do not step on Conveyor…"
Decal - "Important - The Cylinder Lock is to be used…"
Decal - "Caution - Hot Exhaust…"
Decal - "Warning - E-Stop Activation…"
Decal - Emergency Stop Button
Decal - "Warning - Push to Activate…"
Decal - Brouwer Since 1972
Decal - "Warning - Thrown Objects…"
Decal - RoboMax Logo
Decal - "Caution - Stop Engine before…"
Decal - Oil Daily
Decal - Liquid Filled
Decal - "Warning - Actuator Lever…"
Decal - Depth Indicator
Decal - "Caution - Close Clearance Area…"
1
1
1
3
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
2
1
1
1
1
2
1
1
1
8-10
1
18
2
17
D001-240
3
D001-116
4
D001-113
This machine is covered by one or
more of the following patents:
16
6
11
U. S. Patents
3,590,927
4,345,659
3,790,096
4,621,696
4,015,566
4,832,130
4,018,287
4,944,352
4,029,152
4,903,778
Other patents pending.
Also patented in other countries.
5,775,436
6,056,064
THIS MACHINE CANNOT BE COPIED IN WHOLE
OR IN PART FOR OWN USE OR RESALE.
15
015899
EQUIPMENT BUILT FROM EXPERIENCE
015899
202525
7
4133093
D001-236
D001-248
20
10
D001-200
8
D001-242
21
D001-218
19
13
D001-162
D001-162
D001-249
D001-211
12
22
D001-247
9
14
D001-181
24
23
D001-069
25
00-266
5
8-11
ITEM
NO. PART NO.
DESCRIPTION
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
D001-222
D001-240
2000653
015899
D001-032
202525
D001-200
D001-236
4136687
D001-248
D001-228
D001-211
D001-162
00-266
4133093
D001-113
D001-116
015499
D001-242
D001-218
D001-249
D001-247
D001-069
D001-181
D001-032
Decal - "Warning - Operation…"
Decal - RoboMax Calibration
Decal - High Pressure Leak
Decal - Patents
Decal - "Caution - Read Manual…"
Decal - Depth Control
Decal - Cutter Head
Decal - "Warning - Pallet Dispenser Can Crush..."
Decal - RoboMax Controls
Decal - RoboMax JD Joystick
Decal - "Warning - No Riders..."
Decal - Caution
Decal - "Caution - Do Not Exit…"
Decal - "Caution - Do Not Step on Conveyor…"
Decal - "Caution - Auto-Steer…"
Decal - Electrical Box
Decal - "Important - Grease Machine..."
Decal - "Caution - Welding Warning..."
Decal - Brouwer Since 1972
Decal - Hydraulic Tank Level
Decal - Liquid Filled (2 Decals per Tire)
Decal - "Warning - Keep Clear…"
1
1
1
1
3
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
8-12
BROUWER TURF LTD.
23324 Woodbine Avenue, Keswick, Ont. Canada L4P 3E9
Tel. (905) 476-6222 ● 888-341-5113 Fax. (905) 476-6744
Web. www.brouwerturf.com ● E-mail. [email protected]

Provisional - GM Turf Equipment

Transcription

Similar documents

FASTENER COMPONENTS INDEX - The NAAMS Global Standard