model 3010 - DuraTech Industries

model 3010
[ industrial tub grinders ]
DURATECH....Clearing the way for a better tomorrow.
You asked for it and we got it. The DuraTech Model 3010 is built for extreme wear and tear and comes equipped
with a powerful Caterpillar C15 Tier III electronic diesel engine in optional sizes. Easy operation is the key, thanks
to remote controls, and a microprocessor controlled wet clutch, it’s easier than ever to operate. The self-cleaning air
intake system helps protect the engine, reduce engine noise and extend the life of your machine. No matter the terrain,
the DuraTech model 3010 gets the job done.
model 3010
FEATURE
• 44" (111.76 cm) Rotor Mounted on a 6" (15.24 cm)
Rotor Shaft with 4” (10.16 cm) Oil Bath Bearings
• 20 Fixed Single Bolt Hard Surfaced Hammers or 40
Swinging Hammers
• (8) 1 1/2" (3.81 cm) Hammer Rods
• 2403 in. sq. (6103.6 sq cm) of Grinding Screen Area
• 1" (2.54 cm) Thick Screens in Various Sizes
FEATURE
• Single Orbit Motor Tub Drive Thru
120H Chain
• 8" (20.32 cm) Heavy Duty Tub
Channel
• Continuous Tooth Sprocket Around
Tub
• Dual Spring Adjustable Chain
Tension
FEATURE
• HPTO Oil Cooled Clutch
• Self Adjusting
• Continuous Lubrication
• Built-in Torque Limiter & Brake
• Microprocessor Controlled
FEATURE
• 30" (76.2 cm) Wide Laceless
Belly Belt
• Impact Resistant Vulcanized Belt
FEATURE
• 30" (76.2 cm) Wide x 26' (7.92 m)
Long Stacking Conveyor
• 18' (5.48 m) Stacking Height
• Optional Magnetic Roller and
Aluminum Chute for Metal Removal
• 50 Degree Oscillation
[ industrial tub grinder ]
In a class all by itself....
Enclosed Engine Compartment Quiets and Protects the Engine from Dust and
Debris Buildup. Optional Hydraulic Tub Cover Controls Flying Debris
FEATURE
• Command Console:
FEATURE
• Master Engine Controls and
Gauges
• Electric Over Hydraulic
Controls for: Clutch, Governor, Tub, Conveyor and
Optional Equipment
• Optional Remote Control:
Emergency shut off, tub
rotation, Conveyor and
Optional Equipment
• Self Cleaning Rotary Air Intake Screen
• 1800 sq. In. (11,612 sq cm) of Air
Passage
• Constant Clean Air to Radiator and
Engine
• Reduces Maintenance
• Easy Access to Radiator for Servicing
• Allows Flexibility in Positioning Grinder
www.
DURATECHINDUSTRIES.net
model 3010
[ industrial tub grinder ]
38'-4-1/2"
460-1/2"
1169.7 cm
38'-4-1/2"
460-1/2"
1169.7 cm
4'-1"
49"
124.5 cm
25'-2"
302"
767.1 cm"
m o d e l 3 042'-11-3/4"
10P
515 3/4"
25'-2"
302"
767.1 cm"
1310.1 cm
8'-6"
102"
259.1 cm
(Pintle Hitch)
4'-1"
49"
124.5 cm
"
8'-6"
102"
259.1 cm
42'-11-3/4"
515 3/4"
1310.1 cm
11'-1/4"
132 1/4" 9'-3"
336 cm 111"
282 cm
6'-6-3/4"
78 3/4"
200.3 cm
28'-6-1/4"
342 1/4"
869.4 cm
6'-6-3/4"
78 3/4"
200.3 cm
28'-6-1/4"
342 1/4"
869.4 cm
41'-9"
501"
1272.6 cm
model 3010F
4' -1"
49"
124.5 cm
41'-9"
501"
1272.6 cm
4' -1"
49"
124.5 cm
(Fifth Wheel Hitch)
SPECIFICATIONS
Weight with Pintle Hitch
Tongue Weight on Pintle Hitch
Weight with Fifth Wheel Hitch
Transport Width
Transport Height
Transport Length w/ Pintle Hitch
Transport Length w/ Fifth Wheel Hitch
Axle
Electrical
Lights
Tires
Engine
11'-1/4"
132 1/4" 9'-3"
336 cm 111"
282 cm
[model 3010]
35,840 lbs (16,256.75kg)
Tub Wall
1/4" (.64cm) Thick
5,840 lbs. (2,648.98kg)
Tub Floor
3/8" (.95cm) Thick
38,000 lbs (17,236.51kg)
Tub Drive
Single Orbit Motor Tub Drive thru
8'6" (2.59m) w/flares tipped in
120 H Chain
11' (3.35m)
Service Access
90 Degree Tilting Tub
38'4-1/2" (11.69m)
Stacking Conveyor
26' (7.92m) Long x 30" (76.2cm)
42'11-3/4" (13.1m) Self Cleaning System
Wide x 8” (20.3cm) Deep
Electric Powered
(2)-22,500 lbs (10,205.82kg)
Belly Conveyor
30" (76.2cm) Wide Impact Resistant
1800 Square
of Air Passage
24 Volt
Tub Inches
Speed Sensor
Electronic Self Governing
Clearance, Directional and Tail
Rotor – Shaft Diameter 6" (15.24cm) Stress Proof Steel
255/70Rx22.5
Rotor Length
44" (111.76cm)
475 HP (354.21kw)
Rotor Plates
16" (40.64cm) Diameter x
or 540 HP (402.68kw)
1 1/2" (3.81cm) Thick
CAT C15 Tier III
Hammers
20 Fixed Single Bolt or 40 Swinging
Fuel Capacity (Fifth Wheel)
300 Gallons (1,135.6 l)
Feed Opening
45" (114.3cm) x 25" (63.5cm)
Fuel Capacity-Pintle Hitch
180 Gallons (681.37 l)
Screens
Split Screens 1” (2,54cm) Thick
Hydraulic Oil Capacity
50 Gallons (189.3 l)
Screen Area
2430 sq in. (15,503 sq cm)
Tub Width
10' (3.04m)
Hammer Rods
(8) 11/2” (3.81cm) x 43” (109.2cm) Long
Tub Depth
46" (116.84cm)
Bearings
4" (10.16cm) Pillow Block Bearings
Tub Diameter at Base
8' (2.43m)
Hammermill Drive
Direct Drive Through HPTO 14
Transport Height with Tub Cover 135.82 in (345.01cm)
Wet Clutch
Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.
www.
[ w/grapple loader ]
FEATURE
FEATURE
FEATURE
FEATURE
FEATURE
25’ boom, continuous
rotating grapple
.net
Cab raises 4’ for
unobstructed view of loading
All function
controls at the
finger tips of the
operator
Easy to operate
joystick controls
120”
304.8cm
10’
3.05m
159 - 1/2”
405.13cm
13’ 3.5”
4.05m
[model 3010FL
w/grapple loader]
Service Access
Stacking Conveyor
90 Degree Tilting Tub
26' (7.92m) Long x 30" (76.2cm)
Wide x 8” (20.3cm) Deep
Belly Conveyor
30" (76.2cm) Wide Impact Resistant
Tub Speed Sensor
Electronic Self Governing
Rotor – Shaft Diameter 6" (15.24cm) Stress Proof Steel
Rotor Length
44" (111.76cm)
Rotor Plates
16" (40.64cm) Diameter x
1 1/2" (3.81cm) Thick
Hammers
20 Fixed Single Bolt or 40 Swinging
Feed Opening
45" (114.3cm) x 25" (63.5cm)
Screens
Split Screens 1” (2,54cm) Thick
Screen Area
2430 sq in. (15,503 sq cm)
(8) 11/2” (3.81cm) x 43” (109.2cm) Long
Hammer Rods
Bearings
4" (10.16cm) Pillow Block Bearings
Hammermill Drive
Direct Drive Through HPTO 14
Wet Clutch
Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.
Composting
Weight
51,540 lbs (23,378.15kg)
Hitch Weight
13,200 lbs (5,987.42kg)
Transport Width
10' (3.05m)
Transport Height
13' 4" (4.06m)
Transport Length
43' 9" (13.34m)
Axles
(3) 22,500 lbs (10,208.83kg)
Electrical
24 Volt
Lights
Clearance, Directional & Tail
Tires
(12) -255 X70R X 22.5
Engine
540hp(402.68kw) CAT C15 Tier III
Fuel Capacity
300 Gallons (U.S.) (1135.6L)
Hydraulic Oil Capacity
110 Gallons (U.S.) (416.6L)
Tub Width
10' (3.05m)
Tub Depth
46" (116.8cm)
Tub Diameter at Base
8' (2.43cm)
Transport Height with Tub Cover 135.82 in (345.01cm)
Tub Wall
1/4" (.64cm) Thick
Tub Floor
3/8" (.95cm) Thick
Tub Drive
Single Orbit Motor Tub Drive thru
120 H Chain
Wood Recycling
525”
1333.5cm
43’ 9”
13.34m
SPECIFICATIONS
www.
model 3010FL
duratechindustries
DURATECHINDUSTRIES
.net
DURATECHINDUSTRIES
.net
www.
www.
DURATECHINDUSTRIES.net
model 3010T
[ w/tracks ]
FEATURE
FEATURE
Compact stacking
conveyor
CAT 20” x 15’ 320L
Track System
Remote control handles
most of the functions of
the grinder
102”
8’6”
259.08cm
435 - 13/16”
36’4”
11.07m
1,106.96cm
33 - 1/4”
84.46cm
28 - 5/16”
71.81cm
FEATURE
135”
11’4”
342.9cm
25 - 11/16”
65.25cm
21 - 15/16”
55.72cm
70 - 3/4 ”
179.71cm
36 - 15/16”
93.82cm
86”
218.44cm
82 - 1/2 ”
209.55cm
13 - 5/16”
33.81cm
SPECIFICATIONS
Weight
Transport Width
Transport Height
Transport Length
Ground Clearance
Incline Grade
Track System
44,620 lbs.(20239.3kg)
8' 6" (2.59m)
11' 4" (3.45m)
36' 4" (11.07m)
24" (60.7cm)
Tracks will Climb 50% Incline Grade
20" (50.8cm) wide x 15' (4.6m) long
Steel Track
Electrical
24 volt
Engine
475 HP (354.21 kw) or 540 HP
(402.68 kw) CAT C15 Tier III
Fuel Capacity
160 Gallons (605.6 L)
Hydraulic Oil Capacity
50 Gallons (U.S.) (189.3 L)
Tub Width
10' (3.04m)
Tub Depth
46" (116.84cm)
Tub Diameter at Base
8' (2.43m)
Transport Height with Tub Cover 135.82 in (345.01cm)
Tub Wall
1/4" (.64cm) Thick
Tub Floor
3/8" (.95cm) Thick
Tub Drive
Single Orbit Motor Tub Drive thru
120 H Chain
Service Access
90 Degree Tilting Tub
20”
50.8cm
[model 3010T]
Short Conveyor (shown) 10'6" (3.2m) Long x 30" (76.2cm)
Wide x 8” (20.3cm) Deep
Optional Folding
26' (7.92m) Long x 30" (76.2cm)
Conveyor
Wide x 8” (20.3cm) Deep
Belly Conveyor
30" (76.2cm) Wide Impact Resistant
Tub Speed Sensor
Electronic Self Governing
Rotor – Shaft Diameter 6" (15.24cm) Stress Proof Steel
Rotor Length
44" (111.76cm)
Rotor Plates
16" (40.64cm) Diameter x
1 1/2" (3.81cm) Thick
Hammers
20 Fixed Single Bolt or 40 Swinging
Feed Opening
45" (114.3cm) x 25" (63.5cm)
Screens
Split Screens 1” (2,54cm) Thick
Screen Area
2430 sq in. (15,503 sq cm)
Hammer Rods
(8) 11/2” (3.81cm) x 43” (109.2cm)
Long
Bearings
4" (10.16cm) Pillow Block
Bearings
Hammermill Drive
Direct Drive Through HPTO 14
Wet Clutch
Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.
....Clearing the way for a better tomorrow.
3780 Hwy 281 SE, Jamestown, ND 58401
Phone: 1-800-243-4601
duratechindustries.net
UP 1500 02/11