Subject: Air Pipes Product - Class Direct

Transcription

Subject: Air Pipes
Product: Ball/D isc Floats and Vent Heads (Part 1A)
Description of Prod uct
Prod ucer/ Licence N o.
Anhui Huayu Cable Group Co
Ltd,
High-tech Zone Wuw ei
Country,
Anhui Provinence, 238339,
China, People's Republic of.
Type
Details of Approval
EPR Insulated Shipboard Instrum entation Cables
CH EF,CH EF80,
CH EF90,CH EF82,
CH EF92,
CH EFR/ SA
CH EV,CH EV80,
CH EV90,CH EV82,
CH EV92/ SA
Application
Fixed w iring on
ships installations
Rem arks
Expires: 27 August 2019
Rated Voltage 150/ 250V, EPR insu lated , PCP (inner) sheathed
shipboard instrum entation cable, see note1.
Design cod e/ Stand ard :
Manufacture’s specification,
IEC60092-351:2004,
IEC60092-376:2003,
IEC60332-1-2:2004,
IEC60092-359:1999,
Rated Voltage 150/ 250V, EPR insulated , PVC (inner) sheathed
shipboard instrum entation cable, see note1
IEC60228:2004,
IEC60332-3-22:2009,
IEC60754-1~2:2011,
IEC61034-2:2005
CH EP,CH EP80,
CH EP90,CH EP86,
CH EP96/ SC
Cert. N o.
14/ 80048
Abbreviation;
EPR: Ethylene Propylene Rubber
PCP: Poly chloroprene
PVC: Polyvinyl Chlorid e
PO: Polyolefin
CH EPJ,CH EPJ80,
CH EPJ90,CH EPJ85,
CH EPJ95/ SC
Rated Voltage 150/ 250V, EPR insulated , PO (SH F1) (inner)
sheathed shipboard instrum entation cable, see note1.
Flam m ability cod e;
/ SA: Flam e retard ant
type tested to
IEC 60332-1-2,
IEC60332-3-22
Rated Voltage 150/ 250V, EPR insulated , Cross-linked PO (SH F2)
(inner) sheathed shipboard instrum entation cable, see note1.
N ote1 )
Outer prod uction and flam m ability
of cable is show n by the follow ing
suffix and flam m ability cod e.
N o.of Cores
Cross-Section m m 2
1P,3P,7P,12P,
0.75,1.0,1.5,2.5
19P,27P,37P,
1T,3T,7T,12T,
1Q,3Q,7Q
(P=Pair,T=Triad ,Q=Quad )
Maxim um cond uctor tem perature:90°C
1
LLOYD'S REGISTER, 2016
http://www.cdlive.lr.org/information/
NOTICE AND TERMS OF USE
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause
'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or
advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or
advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Subject: Air Pipes
Type
Details of Approval
Ltd ...continued
/ SC:Flam e retard ant,
low -sm oke &
halogen-free
Type tested to
IEC60332-1-2,
IEC60332-3-22,
IEC60754-1~2,
IEC61034-2
N ote:
Outer prod uction suffix;
80: Copper w ire braid ed arm our
90: Steel w ire braid ed arm our
82: Copper w ire braid ed arm our w ith PVC over sheathed
92: Steel w ire braid ed arm our w ith PVC over sheathed
85: Copper w ire braid ed arm our w ith Cross-Linked PO
(SH F2)over sheathed
95: Steel w ire braid ed arm our w ith Cross-Linked PO
86: Copp er w ire braid ed arm our w ith PO (SH F1) over
sheathed
96: Steel w ire braid ed arm our w ith PO (SH F1) over
sheathed
Changzhou Huifeng Marine
Accessory Produce Co Ltd,
280# Fumin load,
Lucheng, Qishuyan,
Changzhou city,
Jiangsu Province, 213025,
533H F
Air pipe head :
Size (DN ):
50 to 450
Material: Bod y:
Grey cast iron H T200
N od ular cast iron QT400-15
Cast steel ZG200-400
Mild steel Q235A
Float:
Jiangsu Guangtong Marine
Valve Co Ltd,
N o. 5 South Coal Mine Road,
Gu San Tow n,
Jingjiang,
Jiangsu Province,
CB/ T3594-94(JGT01) Type
Application
Rem arks
Cert. N o.
14/ 80048
For use as autom atic closing
appliances for air pipes from
tanks on ships and offshore
units.
Expires: 6 N ovem ber 2016
01/ 00165(E4)
For use in m arine and offshore
ind ustries.
Expires: 24 July 2017
12/ 10045
Stainless steel 1Cr18N i9Ti
Autom atic closing appliance for air and overflow pipes.
N om inal pipe d iam eters
: 50 to 400 m m
See the certificate for other cond itions.
2
Subject: Air Pipes
Jiangsu Xinzhou Ship Fitting
Co. Ltd,
N o. 39 Xinjan N orth Road,
N orth Suburb Zone,
Jianjang City, 214500,
Type
FSH series
Details of Approval
Air pipe automatic closing device
Nominal bore sizes: 50 to 600 mm
Size
80% Vacuum flow rate velocity (m/ s)
DN50
34.9
DN65
28.2
DN80
28.4
DN100
26.0
DN125
24.2
Application
Marine and Offshore
applications
Rem arks
Expires: 6 January 2019
Cert. N o.
14/ 80002
See certificate for other cond itions
3
Subject: Air Pipes
Type
DN150
DN200
DN250
DN300
DN350
DN400
DN450
DN500
DN550
DN600
Jiangsu Xinzhou Ship Fitting
Co. Ltd ...continued
Jingjiang Jinzhou Ship Fitting
Co., Ltd,
N o. 8 Xinyi Road,
N orth Suburb Zone,
Jingjiang,
Jinzhou, 214500,
Details of Approval
JZW-01
Rem arks
28.1
26.2
27.7
20.4
17.1
12.2
9.7
9.4
7.8
6.6
Air pipe head:
Size (DN):
Material:
Application
50 to 350 mm
Cert. N o.
14/ 80002
For use as automatic closing
units
ind ustries
Expires: 11 May 2020
10/ 10076(E1)
See certificate for other cond itions.
Body: Q235 mild steel
Seal Seat: HN8433 butadiene rubber
Float: 00Cr18Ni10N austenitic stainless steel
Test stand ard : IACS UR P3 (Rev.2 Mar 2004)
Kw ang San Co., Ltd.,
521, Gw ahak sandan-Ro,
Gangseo-gu,
Busan, 618-230,
Korea, Republic of.
Ball float – A type
(Water & Oil cover
type)
N om inal Pipe Diam eter (m m ) : 50~500
Size
DN
DN
DN
DN
50
65
80
100
15/ 40062
See Certificate for shipboard
applications.
80% Vacuum flow rate velocity (m / s)
Water Cover
Oil Cover
37.47
37.97
37.63
38.12
38.05
39.16
39.32
39.15
4
Subject: Air Pipes
Type
Details of Approval
DN
DN
DN
DN
DN
DN
DN
DN
DN
125
150
200
250
300
350
400
450
500
39.00
39.06
38.80
38.54
39.71
38.52
39.82
39.69
39.38
Application
Rem arks
Cert. N o.
38.41
39.21
39.58
38.66
39.21
39.17
39.03
39.27
39.67
5
Subject: Air Pipes
Kw ang San Co., Ltd.
...continued
Type
Disc float – A type
(Water & Oil cover
type)
Details of Approval
DN
DN
DN
DN
DN
DN
DN
DN
DN
DN
DN
DN
DN
Ball Float-A type
Ball Float-B type
50
65
80
100
125
150
200
250
300
350
400
450
500
Air pipe vent head incorporating au stenitic stainless steel ball float
Polypropylene air pipe ball floats
N om inal
Diam eter
(m m )
85
100
130
Cert. N o.
15/ 40078
80% Vacuum flow rate velocity (m / s)
Water Cover
Oil Cover
29.70
27.05
34.41
25.40
31.24
32.38
39.42
34.23
28.98
22.49
39.37
31.61
39.58
32.85
39.12
39.53
39.71
39.24
39.54
39.06
40.10
39.27
38.34
38.79
39.19
38.00
N om inal pipe d iam eters (m m ): 50A to 450A
SB 4187
Rem arks
applications.
IACS UR P3 ‘Air Pipe Closing Devices’ (Rev.2 Mar 2004)
Plastal d.o.o.,
Industrijska Cesta 1,
SI-1290 Industrijska Cesta 1,
Grosuplje, SI-1290,
Slovenia, Republic of.
ind ustries
Size
Kw ang-San Co., Ltd,
#749-6, Hakjang-D ong, SasangKu,,
Pusan, 617-020 Korea,
Korea, Republic of.
Application
Wall
thickness
(m m )
3.5
3.5
3.5
Automatic closing appliance
for air and overflow pipes
which terminate above the
open deck or in an enclosed
space above the freeboard deck
for use in m arine and offshore
ind ustries.
Expires: 5 June 2018
03/ 10024(E2)
Closing appliances for air and
overflow pipes
12/ 00027(E5)
Weight
(kg)
0.0625
0.0825
0.15
6
Subject: Air Pipes
Type
Details of Approval
185
240
300
4.0
5.0
6.3
Application
Rem arks
Cert. N o.
0.35
0.73
1.55
7
Subject: Air Pipes
Type
Details of Approval
Qingdao F.E Shipping Service
Co. Ltd.,
RM 802 Unit 2 N o 2 Building,
Kaixuan Garden N o 1,
Xianxialing Road,
Qingdao 266101,
DW_A series
DW50A,
DW65A,
DW80A,
DW100A,
DW125A,
DW150A,
DW200A,
DW250A,
DW300A &DW350A
Automatic closing air vent pipe head, incorporating austenitic
stailess steel disc float,
Se-Won Industries Co. Ltd.,
710-2, Hw angsa-ri,
Beopsu-meyeon,
Haman-gun,
Gyeongsangnam-do, 637-832,
Korea, Republic of.
SWF
Nominal pipe diameters (mm) : 50 to 350
Test standard: IACS UR P3
N om inal Diam eter (m m )
40
50
65
80
100
125
150
200
250
300
350
400
450
Flow Rate (m ³/ h) at P 250 m bar
20
31
37
53
94
109
171
302
496
607
929
1264
1737
Application
Rem arks
Cert. N o.
Automatic closing appliance
open deck or in an enclosed
space above the freeboard deck
for use in marine and offshore
industries.
Expires: 6 March 2017
07/ 10016(E1)
ind ustries
00/ 10023(E5)
applications.
8
Subject: Air Pipes
Type
Pipeform Type
Pipeform -Ice Type
(w ith electric heat
tracing d evice):PIPEFORM-ICE-65A,
PIPEFORM-ICE-80A,
PIPEFORM-ICE100A, PIPEFORMICE-125A,
PIPEFORM-ICE150A,
Details of Approval
Autom atic closing appliance for air and overflow pipes, w ith
electric heat tracing d evice for Pipeform -Ice type only.
Application
ind ustries
Rem arks
Cert. N o.
00/ 10024(E3)
See the certificate for other cond itions
N om inal pipe d iam eters (m m )
: 50 to 450
IACS UR P3, Rev.2/ Mar 2004
9
Subject: Air Pipes
Type
Se-Won Industries Co. Ltd.
...continued
PIPEFORM-ICE400A
SEWON IN D . CO., LTD .,
59, Hw angsa gongdan-ro,
Beopsu-myeon,
Gyeongsangnam-do,
Korea, Republic of.
SWB TYPE
Shanghai Kangni Marine
Electric Equipment Co. Ltd.,
N o. 1588 Renmin Village,
N icheng Tow n,
Pudong N ew D istrict,
Shanghai, 201306,
BAC series
Details of Approval
Application
Rem arks
Cert. N o.
00/ 10024(E3)
ind ustries
Size
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 200
DN 250
DN 300
DN 350
DN 400
DN 450
DN 500
Expires: 7 Septem ber 2020
15/ 40102
applications.
64.5
65.6
56.8
55.5
31.1
47.1
36.6
25.4
32.6
33.5
35.4
28.1
24.6
Air pipe heads
Automatic closing device for air and overflow pipes
Marine and Offshore
applications
13/ 80004(E3)
Nominal bore sizes
: 50 to 400 mm
10
Subject: Air Pipes
Type
FKM series
Details of Approval
Air pipe heads
Automatic closing device for air and overflow pipes
Application
Marine and Offshore
applications
Rem arks
Cert. N o.
13/ 80005(E3)
Nominal bore sizes
: 50 to 500 mm
11
Subject: Air Pipes
Taixing Haixing Marine
Machinery Co. Ltd.,
Pioneering Park for Economic
& Trade Industry Zone,
Taixing Tow n,
Taixing City,
Type
HJQE type
Details of Approval
Air Pipe Vent Heads (Ball float type)
Nominal pipe diameters
: 50 to 600 mm
Testing stand ard s:IACS UR P3 “Air pipe closing devices” (Rev. 2 Mar 2004)
HX-L series
Application
Automatic closing appliances
open deck for use in marine
and offshore industries.
Expires: 4 October 2017
Marine and Offshore
applications
Nominal bore sizes (mm): 50 to 250
Size
DN50
3.17
DN65
3.02
DN80
4.16
DN100
3.54
DN125
6.85
DN150
9.94
DN200
7.82
DN250
5.24
Winel B.V.,
D r Philipsw eg 55,
9403 AD Assen,
N etherlands, The.
Tank vent check
valve
Winel B.V.,
P.O. Box 70,
9400 AB Assen,
N etherlands, The.
BOLERO
(DN) mm
50
65
Rem arks
Cert. N o.
12/ 10060
14/ 80003
Type CM, sizes DN
40/ 50/ 65/ 80/ 100/ 125/ 150/ 175/ 200/ 250/ 300/ 350
/ 400/ 450 m m
Marine and offshore.
See m anufacturers
d ocum entation for flow
characteristics.
Tank air vent valve with P.E. ball float and optional AISA 316
gauze wire mesh screen. Steel parts are galvanised.
For use in m arine, offshore
and ind ustrial piping system s
14/ 00072(E1)
See Design Appraisal Docum ent for
cond itions.
97/ 30001(E4)
12
Subject: Air Pipes
Type
Details of Approval
Application
Rem arks
Cert. N o.
80
100
125
150
200
250
300
350
13
Subject: Air Pipes
Winel B.V. ...continued
Type
RMO
RM-1
RM-2
Details of Approval
Application
Autom atic closing appliance for air and overflow pipes, w hich
term inate above the open d eck, for ship and m obile offshore use.
Tank air vent check valve with
P.E. ball float and optional
AISA 316 gauze wire mesh.
Steel parts are galvanised.
ind ustries.
Tank air vent valve w ith polyethylene ball float and optional
gauze w irem esh screen.
Steel parts are galvanised .
N om inal Diam eter
(m m )
Rem arks
Cert. N o.
97/ 30002(E4)
Certificate and Design Appraisal
Docum ent for allow able m arine
applications and operational
lim itation.
97/ 30003(E4)
Flow Rate*) w ith screen in
place ∆P 250 m bar
(m ³/ hour)
RM-1: 50
65
80
100
125
150
175
33,6
55,6
67,0
94,6
147,4
267,7
249,8
RM-2: 200
250
300
350
400
450
273,6
306,5
464,2
672,5
---
*) The tank air valve - pressure drop / flow characteristic curves
of the manufacturer are to be taken into consideration
14
Subject: Air Pipes
Zhangjiagang Haixing Marine
Equipment Factory Co., Ltd.,
28 JiangCheng Road,
Yanghe Tow n,
Zhangjiagang City, 215600,
Type
AS series
BS series
Details of Approval
Nominal bore sizes (mm): 50 to 300
Size
DN50
2.83
DN65
2.81
DN80
4.11
DN100
5.66
DN125
8.52
DN150
12.71
DN300
9.50
Application
Marine and Offshore
applications
Rem arks
Cert. N o.
14/ 80013
15
Subject: Cargo Tank Venting
Product: Air Vent Valve (Part 1A)
Type
Details of Approval
Application
D ongtai Oceangoing Marine
Fitting Co. Ltd.,
N o. 8 Yuanyang South Road,
Qindong Tow n,
D ongtai,
Jiangsu 224212,
CB/ T3594-94.
DS/ ES/ FS
Autom atic closing d evices w ith stainless steel float for air and
overflow pipes
John Gjerde A/S,
Bryggjebakken,
N -6083 Gjerdsvika,
N orw ay.
AERO 1 Series Vent
Check Valves w ith
hot galvanised steel
or 316L stainless
steel bod y
Types AERO 1.1, AERO 1.2, AERO 1.4, AERO 1.5 and AERO 1.6
N om inal d iam eters (m m ): DN 40 to DN 400
Kw ang San Co., Ltd.,
1173-2, Jisa-D ong, GangseoGu,
Busan, 618-230,
Korea, Republic of.
Disc Type
CB/ T3594-94. DS/ ES/ FS
Rem arks
Cert. N o.
12/ 00060
Other Cond itons: See Certificate.
N om inal Diam eter (DN ):
Tem perature range:
Material:
Bod y:
Float:
Seal:
50 to 450
-250 C to +850 C
QT400-15
0Cr26N i5Mo2
N BR
Ship and offshore tank
venting applications.
97/ 00075(E4)
N ot suitable for oil fuel or cargo fuel
oil tanks unless fitted w ith
m anufacturer’s specified flam escreen.
ind ustries
00/ 10010(E4)
ind ustries
15/ 40123(E1)
N om inal d iam eters (m m ): 50 to 450
(Sizes accord ing to “JIS-G” SERIES stand ard s)
IACS UR P3 ‘Air Pipe Closing Devices’ (Rev.2 March 2004)
SEWON IN D . CO., LTD .,
59, Hw angsa gongdan-ro,
Beopsu-myeon,
Gyeongsangnam-do,
Korea, Republic of.
SWS type &
SWC type
N om inal Pipe Diam eter (m m ) :
SWS type : 65 to 500
SWC type : 65 to 450
See Certificate for other cond itions.
16
Type
Details of Approval
Size
DN
DN
DN
DN
DN
65
80
100
125
150
Application
80% Vacuum flow
rate velocity for SUS
d isc (m / s)
80% Vacuum flow
rate velocity for
plastic d isc (m / s)
35.4
26.4
26.4
18.3
36.2
25.5
27.1
23.4
26.7
18.6
Rem arks
Cert. N o.
17
Type
Details of Approval
DN
DN
DN
DN
DN
DN
DN
SEWON IN D . CO., LTD .
...continued
200
250
300
350
400
450
500
18.3
21.9
19.8
19.1
21.3
19.7
24.4
Application
Rem arks
22
19.8
16.9
21.8
21.4
25.2
-
Cert. N o.
15/ 40123(E1)
IACS UR P3 ‘Air vent closing d evices’ (Rev.3, 2012)
Taixing Haixing Marine
Machinery Co. Ltd.,
Pioneering Park for Economic
& Trade Industry Zone,
Taixing Tow n,
Taixing City,
DS & ES
Air Pipe H ead s
Air pipe head :
Size:
50 to 450m m N B
For use as autom atic closing
units
Material:
Bod y:
QT400-15
Float
SUS304
Seal
N BR
CB/ T3594-94
07/ 00055(E1)
Refer to certificate for cond itions of
approval.
N ot to be used for ventilation
of tanker cargo tanks
Autom atic closing d evice w ith stainless steel float for air and
overflow pipes:
N om inal d iam eter (DN ):
Material:
Bod y:
Float:
Seal:
As autom atic closing d evice
on air pipes w hich term inate
above the open d eck.
Automatic closing appliances
with polyethylene ball float for
ballast water treatment system,
to be fitted for ballast water
tanks in ships.
400
QT400-15
SUS304
N BR
Nominal pipe diameters (mm): DN80 to DN450
Materials:
Welded body:
Q235B
Side Cover:
Q235B
Lower/ upper plate(pipe):
SUS304
Non-metal float ball:
Polyethylene (PE)
11/ 00038
Refer to certificate for Cond itions of
Approval
15/ 80037
DN80
1.55
DN100
7.33
18
Type
Details of Approval
DN125
DN150
DN200
DN250
DN300
DN350
DN400
DN450
Application
Rem arks
Cert. N o.
5.45
3.00
2.69
3.40
3.18
4.28
6.95
6.99
19
Product: D e-icing D evice for Pressure/Vacuum Relief Valves (Part 1A)
N iikura Kogyo Co. Ltd,
2-14-18 Higashi-gotanda,
Shinagaw a-ku,
Tokyo, 141-0022,
Japan.
Type
N -N H V-FC-80
N -N H V-FC-100
N -N H V-FC-125
N -N H V-FC-150
N -N H V-FC-200
Details of Approval
H igh Velocity Venting Valve
N om inal bore sizes (m m )
Setting pressure (kPa)
Apparatus Group
: 80 to 200
: 14 to 20
: IIA (MESG=0.9m m )
Application
To relieve pressure d uring
cargo load ing or ballasting
and to prevent the passage of
flam e into inerted cargo tanks
in tankers carrying prod ucts
w ith a m inim um MESG of 0.9
mm.
Rem arks
Cert. N o.
14/ 10006
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
IMO MSC.1/ Circ.1324
ISO 15364:2000
ISO 15364:2007
20
Product: Flame Arrester/Screen Units (Part 1A)
Type
Details of Approval
ABS PV Endustriyel Valf
Sanayi Ve Ticaret A.S.,
Aydinli Mahallesi,
Evren Pasa Caddesi,
G.81 Sokak,
N o.2 Aydinli Tuzla,
Istanbul,
Turkey.
ABS – 6/ 1952
Shinagaw a-ku,
Tokyo, 141-0022,
Japan.
630C-80
630C-100
630C-125
630C-150
630C-200
Flam e arrester incorporating d ouble flam e screen
N om inal bore sizes (m m ):
80 to 200
Apparatus Group
630-N -250
630-N -300
630-N -350
630-N -400
630-N -450
630-N -500
630-N -550
630-N -600
Flam e arrester incorporating d ouble flam e screen
Deflagration flam e arrester for gas/ air m ixtures in explosion
group IIA w ith an MESG of >0.9
Diam eter (DN ):
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
IMO MSC.1/ Circ. 1324
To prevent transm ission of a
d eflagration.
:
:
250 to 750
IIA (MESG=0.9m m )
Rem arks
Cert. N o.
10/ 00037
approval
150
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
Apparatus Group
Application
Device to prevent the passage
of flam e into inerted cargo
tanks in tankers carrying
prod ucts w ith a m inim um
MESG of 0.9 m m , w hen fitted
at the outlets to atm osphere of
vent pipes
87/ 10075(E6)
of flam e into inerted cargo
MESG of 0.9 m m , w hen fitted
at the outlets to atm osphere of
vent pipes
98/ 10001(E4)
630-N -650
630-N -700
630-N -750
21
Type
VV-E/ L/ S series:
VV-E-65
VV-E-80
VV-E-100
VV-E-125
VV-E-150
VV-E-200
VV-E-250
Details of Approval
Vacuum relief valve incorporating flam e screen
Nominal bore sizes (mm)
Setting pressures (MPa)
Apparatus Group
: 65 to 250 (VV-E)
65 to 125 (VV-S & VV-L)
65 to 80 (VV-S-IIB)
: –0.0035 to –0.007
IIB (MESG=0.65m m )
Application
VV-E/ L/ S series:
Device to relieve vacuum and
to prevent the passage of
flam e into cargo tanks in
tankers carrying prod ucts
w ith a m inim um MESG of 0.9
mm
Rem arks
Expires: 16 Decem ber 2018
Cert. N o.
98/ 10019(E7)
22
N iikura Kogyo Co. Ltd
...continued
Type
VV-L-65
VV-L-80
VV-L-100
VV-L-125
VV-S-65*
VV-S-80*
VV-S-100
VV-S-125
Details of Approval
Application
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
ISO 15364: 2000
ISO 15364: 2007
Rem arks
Cert. N o.
98/ 10019(E7)
*Conversion kits w ith IIB
m esh elem ent are approved
for upgrad e of VV-S-65, -80
sizes from apparatus group
IIA to IIB on existing valves.
*Conversion kits
w ith IIB m esh
elem ent
VV-S-IIB series:
VV-S-IIB-65
VV-S-IIB-80
VV-S-IIB series:
Device to relieve vacuum and
to prevent the passage of
flam e into cargo tanks in
tankers carrying prod ucts
w ith a m inim um MESG of
0.65 m m
23
Product: Flame Screen Units (Part 1A)
Pres-Vac Engineering ApS,
Svanevang 3-5,
D K-3450 Allerod,
D enmark.
Type
VFA 2273-1
Details of Approval
Flam e screen unit to prevent the passage of fla m e into cargo
tanks.
Size DN 400.
Application
End of line d evice to prevent
the passage of flam e into
cargo tanks in tankers.
Standard:
IMO MSC Circ. 677 am end ed by MSC Circ. 1324.
Rem arks
Cert. N o.
14/ 00027
With IIB w ire m esh for use w ith
prod ucts belonging to Apparatus
Group IIB and MESG value as greater
than or equal to 0.65 m m .
With IIA w ire m esh for use w ith
prod ucts belonging to Apparatus
Group IIA and MESG values as
greater than or equal to 0.9 m m .
Includ ing conversion kit from
Apparatus Group IIA to IIB.
approval.
710-2, Hw angsa-ri,
Beopsu-meyeon,
Haman-gun,
Korea, Republic of.
SFA
Tanktech Co Ltd,
#388-1 Gupyeong-dong,
Saha-gu,
Busan, 604-818,
Korea, Republic of.
KSFVH -3
KSFVH -4
KSFVH -5
KSFVH -6
KSFVH -8
KSFVH -10
KSFVH -12
Flame Screen
Nominal Diameter (mm):
300A to 800A
IMO MSC/ Circ.677 (amended by Circular 1009 dated 8 June 2001)
of flam e into cargo tanks
w hen fitted at the outlets to
atm osphere of vent pipes in
the field s of m arine, offshore
and ind ustrial installations.
Open vent type flam e screen
N om inal d iam eters (m m ): 80, 100, 125, 150, 200, 250, 300
Apparatus Group
: IIB (MESG=0.65m m )
of flame into inerted cargo
tanks carrying crude oil,
products and chemicals with a
minimum MESG of 0.65 mm
(see note), when fitted at the
outlets to atmosphere of vent
pipes
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
03/ 10092(E3)
applications.
03/ 10062(E2)
24
Type
Details of Approval
Application
Rem arks
Cert. N o.
N ote: MESG=0.65 m m is
applicable for flam e screen
elem ents the d raw ings of
w hich w ere issued on 10 July
2012.
25
Tanktech Co Ltd ...continued
Type
KSFV-3 (N D80)
KSFV-4 (N D100)
KSFV-5 (N D125)
KSFV-6 (N D150)
KSFV-8 (N D200)
KSFV-10 (N D250)
KSFV-12 (N D300)
KSFV-16 (N D400)
KSFV-20 (N D500)
Details of Approval
Flam e screen units to prevent the passage of flam e into cargo
tanks.
N om inal d iam eters (m m ) : 80 to 700
Apparatus Group
Test Stand ard :
IMO MSC/ Cir. 677 as am end ed by IMO MSC/ Circ. 1009 & IMO
MSC/ Circ. 1324
Application
End of line d evice on vent
outlets from cargo tanks on
inerted oil, chem ical and
com bination carriers.
Rem arks
Expires: 11 February 2019
Cert. N o.
04/ 10057(E3)
Devices for chem ical carriers
d ed icated to the carriage of prod ucts
w ith a Maxim um Experim ental Safe
Gap (M.E.S.G.) less than 0.9m m as
d escribed in the international
Com m ission (IEC) 79-1 are to be
ad d itionally tested w ith an
appropriate m ed ium .
KSFV-24 (N D600)
KSFV-28 (N D700)
26
Product: Gas Freeing Covers (Part 1A)
Shinagaw a-ku,
Tokyo, 141-0022,
Japan.
Type
Details of Approval
GFVC series:
Gas freeing vent cover incorporating d ouble flam e screen
GFVC-E
GFVC-F
GFVC-S*
GFVC-L
Nominal d iam eter (m m )
Apparatus Group
: 100 to 350 (GFVC-E & GFVC-F)
100 to 200 (GFVC-S & GFVC-L)
100 to 150 (GFVC-IIB)
IIB (MESG=0.65m m )
GFVC-E/ F/ S / L series:
Covers for venting d uring
cargo tank purging and / or
gas freeing and to prevent the
passage of flam e into inerted
cargo tanks in tankers
carrying prod ucts w ith a
m inim um MESG of 0.9 m m
Rem arks
Cert. N o.
07/ 10065(E2)
Expires: 14 April 2018
13/ 00027(E1)
for upgrad e of GFVC-S-100, 125 & -150 sizes from
apparatus group IIA to IIB on
existing valves.
*Conversion kits
w ith IIB m esh
elem ent
Svanevang 3-5,
D K-3450 Allerod,
D enmark.
Application
GFCV-IIB
Test stand ard :
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
GFVC-IIB series:
gas freeing and to prevent the
GF 4200
End of line Gas Freeing Cover
Marine and offshore gasfreeing cover d esigned to
prevent the passage of flam e
into the cargo tank(s) of
chem ical and oil tankers,
carrying prod ucts that
requiring an apparatus status
of IIB (a m inim um MESG of
0.65)
Size range DN 80 to DN 350
See Certificate for Other Cond itions.
27
Pres-Vac Engineering ApS
...continued
Type
IMO2-VAC
Details of Approval
Application
Flam e arrestor conversion kit for vacuum valves type IMO2VAC from apparatus group IIA to IIB
Rem arks
Marine and offshore
conversion of vacuum valves
type IMO2-VAC from
apparatus group IIA to IIB
Flam escreen unit
N om inal size (DN ) 50/ 65/ 80/ 100/ 125/ 150/ 200/ 250/ 300m m
Suitable for cargoes requiring type IIA and IIB equipm ent
Also conversion kit from IIA to IIB equipm ent.
For m arine use on outlets to
atm osphere of vent and purge
pipes of inerted tanks.
Gas freeing covers fitted w ith flam e arrester.
gas freeing.
For inerted ships as per SOLAS 1974
Reg. 59, Paragraph 2.1.
For non-inerted ships as per SOLAS
1974 Reg. 59, Paragraph 2.2.2
Conversion kit
Type
IMO2-VAC
Outlet (m m ) Apparatus
group
90
0.65
116
0.65
135
0.65
Cert. N o.
13/ 00098
* Conversion kits w ith IIB m esh elem ent (m inim um MESG of
0.65 for upgrad ing of IMO2-VAC from apparatus group IIA to
IIB for size 90m m , 116m m and 135m m .
EPV 1700-1
2325 GFB
2317 GFC
Diam eter
(m m )
50
65
80
100
125
150
100
125
150
200
250
300
350
Clear Area
(cm ²)
7.8
20
30
48
74
108
30
47
67
121
190
274
374
Min. Flow rate
at a velocity
of 20m / s
(m ³/ hr)
56
141
218
347
534
779
220
344
482
871
1368
1979
2692
14/ 00003
See Design Appraisal Docum ent no.
14/ 00003 for other lim itations
90/ 00163(E6)
28
Scanvent ApS,
Solvang 16A,
Allerod, D K-3450,
D enmark.
Type
Scanvent type 2389
m od el PV-2
Scanvent type 2389
m od el PV-1
Scanvent type 2317
DN 80 – DN 100
Details of Approval
Application
End of line flam e arrestor
Screen type N om inal Diam eter
80 FS
DN 80
100 FS
DN 100
MESG
0.65
0.65
Apparatus Group
IIB
IIB
Marine and offshore d evice to
into cargo tanks carrying
MESG of 0.65.
Rem arks
Cert. N o.
13/ 00032
29
Scanvent ApS ...continued
Type
80 FS, 100 FS, 150 FS,
185 FS
Details of Approval
End -of-line flam e screen
Rem arks
Cert. N o.
Marine and offshore gasfreeing cover d esigned to
into cargo the tank(s) of
chem ical and oil tankers,
carrying prod ucts that
requiring an apparatus status
of IIB (a m inim um MESG of
0.65)
Gas Free Vent Cover fitted with flame screen
Nominal Diameter (mm):
80A to 300A
IMO MSC/ Circ.677 (amended by Circular 1009 dated 8 June 2001)
Covers to prevent the passage
of flame in to inerted cargo
tanks in the fields of m arine,
offshore and ind ustrial
installations
Device to p revent the passage
of flam e into cargo tanks in oil
tankers and for venting
d uring cargo tank purging
and / or gas-freeing
04/ 10017(E2)
Cover to prevent the passage
of flam e into cargo tanks in oil
tankers, com bination carriers
and chem ical tankers and for
venting d uring cargo tank
purging and / or gas freeing
00/ 10017(E3)
Size Range DN 80 to DN 185
710-2, Hw angsa-ri,
Beopsu-meyeon,
Haman-gun,
Korea, Republic of.
SGF
Tanktech Co Ltd,
Saha-gu,
Busan, 604-818,
Korea, Republic of.
KSGFH -3
KSGFH -4
KSGFH -5
KSGFH -6
KSGFH -8
KSGFH -10
KSGFH -12
Gas free vent cover incorporating d ouble flam e screen
KSGF-10
KSGF-12
Gas freeing vent cover incorporating flam e screen
Tanktech Co. Ltd.,
#1506-2, Songjeong-dong,
Gangseo-gu,
Busan, 618-270,
Korea, Republic of.
Application
M.E.S.G (m m ): 0.9
13/ 00033
03/ 10093(E3)
applications.
IMO MSC/ Circ.677 as am end ed by IMO MSC/ Circ.1009 & IMO
MSC/ Circ.1324
N om inal pipe d iam eter(m m ) : 250, 300
Apparatus Group
IMO MSC/ Circ. 677
30
Product: High Velocity Pressure/Vacuum Relief Valves (Part 1A)
Type
Details of Approval
ABS PV Endustriyel Valf
Sanayi Ve Ticaret A.S.,
Aydinli Mahallesi,
Evren Pasa Caddesi,
G.81 Sokak,
N o.2 Aydinli Tuzla,
Istanbul,
Turkey.
H N G-3/ 1926
H N G-4/ 1923
H N G-6/ 1951
H igh velocity pressure vacuum valves:
Bay Valves ApS,
Falstervej 10G,
5800 N yborg,
D enmark.
1200 series high
velocity valves.
Shinagaw a-ku,
Tokyo, 141-0022,
Japan.
N -N H V-SCS-65
N -N H V-SCS-80
Application
Rem arks
To relieve pressu re or vacuum
and prevent the passage of
flam e into cargo tanks of oil
and chem ical tankers carrying
MESG of 0.65 m m .
Expires: 8 May 2017
1200 Series – High velocity valve nos. 1200 (80mm), 1202 (100mm),
1204 (125mm), 1206 (150mm), 1208 (200mm), 1210 (250mm)
&1212 (350mm).
Vacuum valve no. 1203,1207, 1209, 1213 with integrated gas freeing
cover.
Valves m naufactured in Denm ark and at :
Bay Valves Nantong Co. Ltd.
No. 35, South Tongfu Road
Nantong City, Jiangsu Province
China.
atm osphere of vent pipes of
inerted tanks.
To relieve pressure d uring
cargo load ing or ballasting
flam e into inerted and non inerted cargo tanks in tankers
m inim um MESG of 0.65 m m .
Diam eter (DN
Apparatus Group
80, 100 and 150
: 65 and 80
: 20
: IIB (MESG=0.65m m )
Cert. N o.
03/ 00033(E5)
See Design Appraisal Docum ent.
14/ 00116
14/ 00116 for other lim itations
14/ 10005(E1)
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
ISO 15364:2000
ISO 15364:2007
ISO 16852:2010
31
Type
BVW13C-FC-80
BVW13C-FC-100
Details of Approval
Application
Weight type breather p ressure and vacuum relief valve w ith stick
check d evice incorporating flam e screen
N om inal bore sizes (m m ):
80 to 100
Opening settings (MPa):
Pressure :
+0.014 to +0.02
Vacuum :
-0.0035 to -0.007
Device to relieve the effect of
overpressure or vacuum
caused by therm al variations
in cargo tanks and to prevent
inerted cargo tanks in tankers
Rem arks
Cert. N o.
87/ 10077(E7)
32
Type
Details of Approval
Application
Rem arks
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
ISO 15364: 2000
ISO 15364: 2007
...continued
BVW-41C-FC-80
BVW-41C-SCS-80*
BVW-41C-IIB-80
*Conversion kits
w ith IIB m esh
elem ent
87/ 10077(E7)
Breather valves for pressure and vacuum relief incorporating
flam e screen
Opening settings (MPa)
Apparatus Group
Cert. N o.
: 80
: +0.005 to +0.02 (pressure)
-0.0035 to -0.007 (vacuum )
: IIA (MESG=0.9)
IIB (MESG=0.65)
BVW-41C-FC-80 &
BVW-41C-SCS-80*:
overpressure or vacuum by
therm al variations in cargo
tanks and to prevent the
passage of flam e into cargo
MESG of 0.9 m m
92/ 10006(E5)
for upgrad e of BVW-41C-SCS-80 size from apparatus group
IIA to IIB on existing valves.
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
ISO 15364: 2000
ISO 15364: 2007
BVW-41C-IIB-80:
overpressure or vacuum by
therm al variations in cargo
tanks and to prevent the
passage of flam e into cargo
MESG of 0.65 m m
33
Type
Details of Approval
N H V series:
N H V-SS-80
N H V-SS-100
N H V-SS-125
N H V-SS-80-L
N H V-SS-100-L
N H V-SS-125-L
: 80 to 250 (N H V-SS series)
65 to 125 (N H V-SUS series)
: 14 to 20
Apparatus Group
IIB (MESG=0.65m m )
Application
N H V-SS-150, -200 and -250
type and N H V-SS-150-L, -200L and -250-L type: to relieve
pressure d uring cargo load ing
or ballasting and to prevent
inerted cargo tanks in tankers
Rem arks
Cert. N o.
96/ 10030(E7)
N H V-SUS-65B
34
...continued
Type
N H V-SUS-65
N H V-SUS-80
N H V-SUS-100
N H V-SUS-125
N H V-SUS-100-L
N H V-SUS-125-L
Details of Approval
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
ISO 15364:2000
ISO 15364:2007
N H V-SS-150
N H V-SS-200
N H V-SS-250
N H V-SS-150-L
N H V-SS-200-L
N H V-SS-250-L
H S-ISO-1
H S-ISO-2L
H S-ISO-2M
H S-ISO-2S
H S-ISO-3L
H S-ISO-3S
H S-ISO-4
H S-ISO-5
H S-ISO-6
H S-ISO-7
N on-Oscillating H igh Velocity Valve Minim um set pressure (kPa) :
12
Outlet (m m ):
83 to 151
Rem arks
N H V-SS-80, -100 & -125 type,
N H V-SUS-65B, -65, -80, -100 &
-125 type, N H V-SS-80-L, -100L & -125-L type and N H VSUS-100-L & -125-L type: to.
relieve pressure d uring cargo
load ing or ballasting and to
into inerted and non -inerted
N H V-SUS-65B-L, -65-L & -80L type: To relieve pressure
d uring cargo load ing or
ballasting and to prevent the
and non-inerted cargo tanks
on oil tankers, w ith a
N H V-SUS-65B-L
N H V-SUS-65-L
N H V-SUS-80-L
Svanevang 3-5,
D K-3450 Allerod,
D enmark.
Application
Marine and offshore d evice to
relieve pressure or vacuum
flam e into cargo tanks
m inim u m MESG of 0.65
Cert. N o.
96/ 10030(E7)
For change of d esignation from
apparatus group IIA to IIB on existing
valves of N H V-SUS-65B-L,-65-L &-80L type, see the procd ucer’s
instructions.
02/ 00071(E4)
35
Type
H S-ISO-VAC1 *
H S-ISO-VAC2 *
H S-ISO-VAC3 *
H S-ISO-VAC4
H S-ISO-VAC5
H S-ISO-VAC6
Details of Approval
Vacuum Relief Valve Set pressure (kPa) :
Inlet (m m ):
Application
Rem arks
Cert. N o.
3.5
95 to 250
36
Pres-Vac Engineering ApS
...continued
Scanvent ApS,
Solvang 16A,
Allerod, D K-3450,
D enmark.
Type
Details of Approval
* Conversion kits
w ith IIB m esh
elem ent.
Application
Rem arks
* Conversion kits w ith IIB
for upgrad e of H S-ISO-VAC
size 1 through 3 from
apparatus group IIA to IIB on
new and existing valves.
02/ 00071(E4)
PV-ECO
PV-VOC
PV-ECO-VAC
PV-VOC-VAC
PV-ECO sizes 39/ 53/ 66/ 80 and 98
PV-VOC sizes 106/ 122/ 150/ 174/ 204
PV-ECO-VAC sizes 95/ 106/ 116/ 150
PV-VOC-VAC sizes 180/ 215/ 248/ 315
For use w ith prod ucts belonging to Apparatus Group IIB and
MESG value of greater than or equal to 0.65 m m
atm osphere of vent pipes of
inerted and non-inerted tanks.
H igh Velocity Valve
H VV-1, H VV-2,
H VV-3, H VV-4,
H VV-5 and H VV-7
H igh Velocity Pressure Vacuum Valves
To relieve pressure or vacuum
and prevent the passage of
flam e into cargo tanks of oil
and chem ical tankers carrying
MESG of 0.65 m m .
Other Cond itions:
Valves to be selected and installed in
accord ance w ith the m anufacturer’s
instructions and recom m end ations,
and subject to the user's obligations
d etailed in ISO 15364:2007.
Diam eter (DN ):
80, 100, 150 & 250
Cert. N o.
14/ 00060(E2)
14/ 00060(E2) for other lim itations
Vacuum Valve Type
VV-1, VV-2 and
VV-5,
The valves have been satisfactorily
tested and approved against the
requirem ents of EN 12874:2001, but it
should be noted that this stand ard
has been w ithd raw n.
Gas-Freeing Cover
Type GF-85 & GF200
The m anufacturing facilities are to be
inspected by an LR Surveyor w hen
routine prod u ction of the prod ucts
com m ences, to verify that prod uction
is in accord ance w ith the specim ens
tested .
12/ 00049
37
710-2, Hw angsa-ri,
Beopsu-meyeon,
Haman-gun,
Korea, Republic of.
Type
H PV series
H PV-2½
H PV-3
H PV-4
H PV-5
H PV-6
H PV-8
H PV-10
Details of Approval
H igh velocity pressure/ vacuum relief valve.
Opening settings (MPa)
:65, 80, 100, 125, 150, 200, 250
: +0.007 to +0.021
Application
HPV-2 ½ , HPV-3, HPV-4,
HPV-5, HPV-6, H PV-8 & H PV10
(flame screen of 30 mesh x
SWG No.34 incorporated):
Rem arks
See the other cond itions in the
certificate.
Cert. N o.
01/ 10077(E5)
38
Type
Se-Won Industries Co. Ltd.
...continued
Details of Approval
Apparatus Group
: IIA (MESG=0.9 mm)
HPV-2 ½ , HPV-3, HPV-4, HPV-5, HPV-6, H PV-8 & H PV-10
(flame screen of 30 mesh x SWG No.34 incorporated)
: IIB (MESG=0.65 mm)
HPV-2 ½ , HPV-3, HPV-4, HPV-5 & HPV-6
(flame screen of 32 mesh x SWG No.28 incorporated)
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
IMO/ MSC/ Circ. 1324
ISO 15364:2000
ISO 15364:2007
Application
Rem arks
of flam e into inerted or non inerted cargo tanks in oil and
chem ical tankers carrying
cargoes w ith a m inim um
MESG of 0.9 m m and to
d uring cargo load ing,
ballasting or d uring
d ischarging
H PV-2 ½ , H PV-3, H PV-4,
H PV-5, H PV-6
(flam e screen of 32 m esh x
SWG N o.28 incorporated ) :
Cert. N o.
01/ 10077(E5)
chem ical tankers carrying
cargoes w ith a m inim um
MESG of 0.65 m m and to
d ischarging
N SD Series:
N SD-150
N SD-200
N SD-250
N SD-300
H igh velocity pressure/ vacuum relief valve, w ith electric heat
tracing d evice for N SD-ICE sereies only.
Opening settings (bar)
MESG (mm)
: 0.9
: 150, 200, 250, 300
: +0.14 to +0.21 (pressure)
-0.07 to -0.035 (vacuum )
chem ical tankers and to
d ischarging, w ith a m inim um
MESG of 0.9 m m
01/ 10078(E4)
39
Type
N SD-ICE Series:
N SD-ICE-150A
N SD-ICE-200A
N SD-ICE-250A
N SD-ICE-300A
Details of Approval
Application
Rem arks
Cert. N o.
IMO MSC/ Circ. 677
IMO MSC/ Circ. 1009
ISO 15364
40
Type
Tanktech Co Ltd,
Saha-gu,
Busan, 604-818,
Korea, Republic of.
KSRH -900
Tanktech Co. Ltd.,
Gangseo-gu,
Busan, 618-270,
Korea, Republic of.
ISO-BF-2.5
ISO-BF-3
ISO-BF-4
ISO-BF-5
Details of Approval
Em ergency pressure relief hatch.
N om inal size (m m )
: 900
Opening settings (kPa) : 24.5
Pressure/ Vacuum Relief Valves
N om inal d iam eters:
Opening settings:
Apparatus Group:
65, 80, 100 & 125 m m
+14 to +21 kPa (pressure)
-7.0 to -3.5 kPa (vacuum )
IIA (MESG=0.9m m )
Application
Rem arks
Pressure relief d evice to
protect the hull structure from
being und uly over-stressed in
case of a pressure rise in the
interbarrier space or cargo
hold d ue to cargo tank failure
in LPG tankers
Device to prevent overpressure and vacuum
exceed ing the m axim um
allow able w orking pressure of
the cargo tanks in oil and
chem ical tankers
SUPER-ISO & VAC-ISO type,
65/ 80/ 100/ 125 :
of flame into cargo tanks and to
relieve over-pressure or
vacuum exceeding the
maximum allowable working
pressure of the cargo tanks
carrying crude oil, products
and chemicals with a
Cert. N o.
02/ 10019(E2)
Reference stand ard : IACS Unified
Interpretation GC9 (1988)
15/ 40059(E2)
See the certificate for other cond itions
Testing stand ard s:IMO/ MSC/ Circular 677
IMO/ MSC/ Circular 1009
ISO 15364 : 2000
TOPSAFE Co., Ltd,
368-3 Yangdong-ri,
Juchon-myeon,
Gimhae-si,
Gyeonsangnam-do, 621-842,
Korea, Republic of.
SUPER-ISO65/ 80/ 100/ 125/ 150/
200/ 250/ 300
VAC-ISO65/ 80/ 100/ 125/ 150/
200/ 250/ 300
High Velocity Pressure/ Vacuum Relief Valve
N om inal d iam eters: 65, 80, 100, 125, 150, 200, 250 & 300 m m
Opening settings: +700/ +1400/ +2100 m m Aq (pressure)
-350/ -700 m m Aq (vacuum )
Apparatus Group : IIA (MESG=0.9 mm)
IIB (MESG=0.65 mm)
15/ 40083(E4)
41
Type
Details of Approval
Stand ard s:IMO/ MSC/ Circ. 677
ISO 15364 : 2007
EN 12874, January 2010
Application
Rem arks
Cert. N o.
minimum MESG of 0.65 mm
SUPER-ISO & VAC-ISO type,
150/ 200/ 250/ 300 :
of flame into cargo tanks and to
relieve over-pressure or
vacuum exceeding the
maximum allowable working
pressure of the cargo tanks
carrying crude oil, products
and chemicals with a minimum
MESG of 0.9 mm
42
Subject: Compressed Air
Product: Air Compressors (Part 1A)
Atlas Copco Airpow er N .V.,
Industrial Air D ivision,
PO Box 103,
Boomsesteenw eg 957,
B-2610 Wilrijk,
Belgium.
Type
LE/ LT
Details of Approval
Application
Reciprocating air com pressor.
Type
LE 2-10
LE 3-10
LE 5-10
Max. pressure
(bar)
10
10
10
Free Air Displacem ent (l/ s)
50 H z
60 H z
3.4
3.9
4.4
5.1
8.4
9.7
LE 7-10
LE 10-10
LE 15-10
LE 20-10
10
10
10
10
11.7
15.7
18.6
23.9
13.6
17.4
21.9
28.2
LT 2-15
LT 3-15
LT 5-15
LT 7-15
LT 10-15
15
15
15
15
15
3.1
4.0
6.7
9.2
11.7
3.6
4.7
7.9
10.9
N/ A
LT 2-20
LT 3-20
LT 5-20
LT 7-20
LT 10-20
LT 15-20
LT 20-20
20
20
20
20
20
20
20
2.1
2.9
5.0
6.7
9.1
14.1
17.0
2.7
3.6
6.3
8.4
13.6
17.0
19.9
LT 3-30
LT 5-30
LT 7-30
LT 10-30
LT 15-30
LT 20-30
30
30
30
30
30
30
2.5
4.4
6.4
8.5
9.3
17.0
3.1
5.5
8.0
N/ A
11.1
19.7
Marine, offshore and general
ind ustrial use for the supply
of com pressed air.
Rem arks
Refer to Design Appraisal Docum ent
for Other Cond itions.
Cert. N o.
96/ 00049(E4)
43
Type
Details of Approval
Application
Rem arks
Cert. N o.
Free air d isplacem ent is specified at reference cond itions,
Speed (rpm ): 50 H z
1500
60 H z
1800
Inlet tem perature (°C):
0 to 40
44
Details of Approval
Application
TMC 7-27,
TMC 21SA,
EMH 35-44,
TMC 30-40SA,
TMC 54-85,
TMC 60-80SA,
TMC 86-124,
TMC 95SA,
TMC 105-235,
Oil injected screw air compressors, rotors made of steel Imatra
Hydax 15 / Corus 520S or cast iron EN -GJS-500-14 with ball or
roller and angular contact bearings and rotor casings (EN -GJL-200
or 250). Oil separation by receiver cyclone and following separating
cartridges and recirculation. Air discharge fitted with after cooler,
water separator and safety valve in addition to controller with
safety functions.
Compressed working,
instrument and control air on
board of ships classed or
intended for classification with
Lloyd’s Register or on LR
Mobile Offshore units.
TMC 125-235SA,
TMC 105-235SL,
TMC 240-365,
TMC 240-365SA,
ULM 90-200,
RRM 105-185,
TMC 400-450
Ratings
Other conditions:
Hatlapa Uetersener
Maschinefabrik GmbH & Co.
KG,
Tomescher Weg 5 - 7,
25436 Uetersen,
Germany.
L 90
Three-cylind er, three stage, reciprocating, single acting, air cooled , high pressure, W-type air com pressor w ith intercooling
after 1st and 2nd stage.
J.P Sauer & Sohn
Maschinenbau GmbH,
Brauner Berg 15,
24159 Kiel,
Germany.
WP 200, WP 240,
WP400
Gardner D enver Oy,
Etu-Hankkionkatu 9,
33700 Tampere,
Finland.
Type
Working Pressure range:
Capacity (nominal pressure):
Motor ratings:
from 6 up to 13 barg
from 70 up to 4155 m³/ h
8 – 460 kW
Air d elivery (at 40 bar, 1750 l/ m in) : 116 m 3/ h
Tw o- stage, w ater cooled V-type air com pressor
WP 200
135.0 m 3/ h at 1170 min -1 and 30 bar
165.0 m 3/ h at 1470 min -1 and 30 bar
200.0 m 3/ h at 1770 min -1 and 30 bar
Rem arks
Cert. N o.
15/ 20059
As air com pressor for starting
air and other essential air
consum ers on board ships or
offshore installations classed
or intend ed for Classification
w ith Lloyd ´s Register.
00/ 20041(E2)
As starting air com pressor on
ships or offshore installations
classed or intend ed for
Classification w ith Lloyd ´s
Register.
03/ 20017(E2)
The manufacturer’s operating
and maintenance instructions
are to be sought.
45
Type
Details of Approval
WP 240
WP 400
Application
Rem arks
Cert. N o.
160.0 m 3/ h at 1170 min -1 and 30 bar
200.0 m 3/ h at 1470 min -1 and 30 bar
240.0 m 3/ h at 1770 min -1 and 30 bar
280.0 m 3/ h at 1170 min -1 and 30 bar
355.0 m 3/ h at 1470 min -1 and 30 bar
430.0 m 3/ h at 1770 m in -1 and 30 bar
46
J.P Sauer & Sohn
Maschinenbau GmbH
...continued
Type
WP 81L
WP 101L
Details of Approval
Three- stage, air cooled W-type air compressor
63.4 m 3/ h at 1170 min -1 and 40 bar
79.2 m 3/ h at 1470 min -1 and 40 bar
96.0 m 3/ h at 1770 min -1 and 40 bar
WP 101L 79.7 m 3/ h at 1170 min -1 and 40 bar
97.0 m 3/ h at 1470 min -1 and 40 bar
116.2 m 3/ h at 1770 min -1 and 40 bar
WP 81L
WP 45L
WP 65L
Two-stage, air cooled V-type air compressor
WP 45L
WP 65L
Loggers Rubber Techniek B.V.,
3316 BE D ordrecht,
N etherlands, The.
Support Airspring
Stabilizing Airspring
38.4 m 3/ h at 1170 min -1 and 40 bar
48.0 m 3/ h at 1470 min -1 and 40 bar
58.0 m 3/ h at 1770 min -1 and 40 bar
50.0 m 3/ h at 1170 min -1 and 40 bar
64.0 m 3/ h at 1470 min -1 and 40 bar
77.0 m 3/ h at 1770 min -1 and 40 bar
Airsprings w ith naturel rubber (N R) bellow s w hich take forces in
vertical d irection (Support Airspring) and horizontal d irection
(Stabilizing Airspring).
Ratings:
Support Airspring:
nom inal static vertical load :
m ax. static vertical load :
m ax. operational pressure:
40 kN
55 kN
8 bar
Stabilizing Airspring:
nom inal static horizontal load : 70 kN
m ax. static horizontal load :
100 kN
m ax. operational pressure:
8 bar
Application
Rem arks
Cert. N o.
As starting air compressors on
ships and offshore installations
classed or inten-ded for
Classification with Lloyd’s
Register
03/ 20018(E2)
As starting air compressors on
ships and offshore installations
classed or intended for
Register
03/ 20019(E2)
For the use in air suspension
system s to red uce noise and
vibration in d eckhouses /
accom m od ations on seagoing
vessels.
Other Conditions
15/ 20122
Installation should be in
accord ance w ith prod ucer’s
specification and recom m end ation. The ability of
absorption of vibrations is not
part of the Type Approval and
m ust be special consid ered .
47
Product: Oil and Water Separators for Compressors (Part 1A)
Mitsubishi Kakoki Kaisha Ltd,
2-1 Ohkaw a-cho,
Kaw asaki-ku,
Kaw askai-city,
Kanagaw a-pref, 210-8560,
Japan.
Type
Selfjector
H ERCULES series
Details of Approval
Application
Sepration efficiency (%): More than 85% in a single pass
Treating quantity (l/ h):Mod el
H eavy fuel oil H eavy fuel oil –
380cSt at 50 ºC
700 cSt at 50 ºC
SJ 15H / H H
(60H z) 1400 at 98 ºC
900 at 98 ºC
(50H z) 1350 at 98 ºC
850 at 98 ºC
SJ 25H / H H
(60H z) 2100 at 98 ºC
1400 at 98 ºC
(50H z) 2050 at 98 ºC
1350 at 98 ºC
SJ 35H / H H
(50H z)
SJ 60H / H H
(50H z)
SJ 85H / H H
(50H z)
SJ 110H / H H
(50H z)
(60H z) 3900 at 98 ºC
3800 at 98 ºC
2400 at
(60H z) 5900 at 98 ºC
5900 at 98 ºC
3700 at
(60H z) 8300 at 98 ºC
8300 at 98 ºC
5300 at
(60H z) 11000 at 98 ºC
11000 at 98 ºC
7000 at
2500 at
98 ºC
3700 at
98 ºC
5300 at
98 ºC
7000 at
98 ºC
Rem arks
Cert. N o.
Separation of water/ sludge
mixtures from marine fuel oil.
Other place of prod uction:
Sam gong Co., Ltd . (Licensee)
135, N oksansand an 17Ro, Kangso-ku,
Busan, 618-817 Korea
14/ 10020(E1)
On ships and offshore
installations classed or
intended for Classification with
Lloyd’s Register for cleaning of
marine fuels according to ISO
8217.
08/ 20049(E2)
98 ºC
98 ºC
98 ºC
98 ºC
Test stand ard s : JIS F6601-1996
Solid sam ples: JIS Z8901 – class 11
Westfalia Separator Group
GmbH,
Werne-Habig-Str. 1,
59302 Oelde,
Germany.
OSD 6/ 3…6,
OSD 18/ 8…18,
OSD 35/ 20…40,
OSD 60/ 40…60,
Ratings:
Feed temperature up to +100°C,
Viscosity max. 700 cSt at 50°C,
Density of fuel oil max. 1010 kg/ m³ at 15°C
Ambient temperature: +5 to +55°C,
Certified flow rates (CFR) in accordance with CWA 15375
OSE 5/ 3…5,
OSE 10/ 6…10,
OSE 20/ 15…20,
OSE 40/ 25…40,
OSE 80/ 50…80
Type
OSD 6/
OSD 6/
OSD 6/
OSD 6/
CFR [ l/ h ] for
380 cSt at 50°C
3
4
5
6
858
1258
1418
1601
CFR [ l/ h ] for
700 cSt at 50°C
445
653
736
990
48
Type
Details of Approval
OSD 18/
OSD 18/
OSD 18/
OSD 18/
8
10
15
18
2060
2796
3250
3964
Application
Rem arks
Cert. N o.
1270
1753
2000
2483
49
Westfalia Separator Group
GmbH ...continued
Type
Details of Approval
OSD 35/
OSD 35/
OSD 35/
OSD 35/
OSD 35/
Application
20
25
30
35
40
4350
4931
5250
5499
5807
2800
3115
3370
4117
4464
OSD 60/ 40
OSD 60/ 50
OSD 60/ 60
8233
9619
10380
6624
6978
8080
OSE 5/ 3
OSE 5/ 4
OSE 5/ 5
950
1050
1200
500
550
650
OSE 10/ 6
OSE 10/ 8
OSE 10/ 10
1800
2050
2350
1150
1250
1450
OSE 20/ 15
OSE 20/ 18
OSE 20/ 20
3800
4650
5250
2350
2850
3200
OSE 40/
OSE 40/
OSE 40/
OSE 40/
25
30
35
40
6600
7850
8300
9500
4200
5150
5450
6250
OSE 80/
OSE 80/
OSE 80/
OSE 80/
50
60
70
80
12600
13300
14150
16100
9750
10350
10950
12500
Rem arks
Cert. N o.
08/ 20049(E2)
Depending of kind of medium the maximum recommended
capacity may be different to the certified flow rates. The
manufacturer‘s recommendations are to be sought.
50
Subject: Containers
Product: Gas Storage Containers (Part 1A)
Ltd,
High-tech Zone Wuw ei
Country,
Anhui Provinence, 238339,
Type
CKEF,CKEF80,
CKEF90,CKEF82,
CKEF92,CKEFR/ SA
CKEV,CKEV80,
CKEV90,CKEV82,
CKEV92/ SA
CKEP,CKEP80,
CKEP90,CKEP86,
CKEP96/ SC
Details of Approval
EPR Insulated Shipboard Control and Instrum en tation Cables
Rated Voltage 150/ 250V, EPR insulated , PCP (inner) sheathed
shipboard control and instrum entation cable, see note1.
Application
Rem arks
Fixed w iring on ships
installations
14/ 80046(E1)
IEC60092-351:2004,
IEC60092-376:2003,
Rated Voltage 150/ 250V, EPR insulated , PVC (inner) sheathed
IEC60332-1-2:2004,
IEC60092-359:1999,
IEC60228:2004,
IEC60332-3-22: 2009 ,
IEC60754-1~2:2011,
IEC61034-2:2005
CKEPJ,CKEPJ80,
CKEPJ90,CKEPJ85,
CKEPJ95/ SC
Rated Voltage 150/ 250V, EPR insulated , PO (SH F1) (inner)
sheathed shipboard control and instrum entation cable, see note1.
type tested to
IEC 60332-1-2,
IEC60332-3-22
Rated Voltage 150/ 250V, EPR insulated , Cross-linked PO (SH F2)
(inner) sheathed shipboard control and instrum entation cable,
see note1.
Abbreviation;
EPR: Ethylene Propylene Rubber
PCP: Poly chloroprene
PO: Polyolefin
/ N A:Fire resistant
type tested to
IEC 60332-1-2,
IEC60331-21/ 31
N ote:
“N o of Cores” is selected from the follow ing series of core
num ber:2,3,4,7,10,14,19,24,30,37
N o.of Cores
Cross-Section m m 2
2~37
0.75,1.0,1.5,2.5
Cert. N o.
N ote1 )
51
Subject: Containers
Type
low -sm oke &
halogen-free
Type tested to
IEC60332-1-2,
IEC60332-3-22,
IEC60754-1~2,
IEC61034-2
Details of Approval
Application
Rem arks
Cert. N o.
85: Cop per w ire braid ed arm our w ith Cross-Linked PO
52
Subject: Containers
Ltd ...continued
Type
/ N SC: Flam e
retard ant & Fire
resistant, low -sm oke
& halogen-free
type tested to
IEC60332-1-2,
IEC60332-3-22,
IEC60331-21/ 31,
IEC60754-1~2,
IEC61034-2
Details of Approval
Rem arks
86: Copper w ire braid ed arm our w ith PO (SH F1) over
sheathed
sheathed
XLPE Insulated Shipboard Control and Instrum entation Cables
CKJV,CKJV80,
CKJV90,CKJV82,
CKJV92/ SA
Application
Rated Voltage 150/ 250V, XLPE insulated , PVC (inner) sheathed
CKJP,CKJP80,
CKJP90,CKJP86,
CKJP96/ SC
Rated Voltage 150/ 250V, XLPE insulated , PO (SH F1) (inner)
sheathed shipboard control and instrum enta tion cable, see note1.
CKJPJ,CKJPJ80,
CKJPJ90,CKJPJ85,
CKJPJ95/ SC
Rated Voltage 150/ 250V, XLPE insulated , Cross-linked PO
(SH F2)
(inner) sheathed shipboard control and instrum entation cable,
see note1.
Cert. N o.
14/ 80046(E1)
For storage of com pressed ,
liquefied gases exposed to
am bient tem peratures
betw een -50˚C and +65˚C
14/ 80047(E1)
IEC60092-351:2004,
IEC60092-376:2003,
IEC60332-1-2:2004,
IEC60092-359:1999,
IEC60228:2004,
IEC60332-3-22:2009,
IEC60754-1~2:2011,
IEC61034-2:2005
53
Subject: Containers
Type
type tested to
IEC 60332-1-2,
IEC60332-3-22
/ N A:Fire resistant
type tested to
IEC 60332-1-2,
IEC60331-21/ 31
Details of Approval
N o.of Cores
Cross-Section m m 2
2~37
0.75,1.0,1.5,2.5
N ote:
“N o of Cores” is selected from the follow ing series of core
num ber:2,3,4,7,10,14,19,24,30,37
Application
Rem arks
Cert. N o.
Abbreviation;
XLPE: Cross-linked polyethylene
PO: Polyolefin
N ote1 )
54
Subject: Containers
Ltd ...continued
Sinoma Science & Technology
(Jiujiang) Co., Ltd.,
N o.138 Renmin Road(N ),
Ruichang City,
Jiangxi Province,
Type
Details of Approval
low -sm oke &
halogen-free
Type tested to
IEC60332-1-2,
IEC60332-3-22,
IEC60754-1~2,
IEC61034-2
85: Copper w ire braid ed arm our w ith Cross-Linked PO
/ N SC: Flam e
retard ant & Fire
resistant, low -sm oke
& halogen-free
type tested to
IEC60332-1-2,
IEC60332-3-22,
IEC60331-21/ 31,
IEC60754-1~2,
IEC61034-2
86: Copper w ire braid ed arm our w ith PO (SH F1) over
sheathed
sheathed
Seamless Steel Gas
Cylinder
Ø267x6mm
Seam less steel gas cylind er m ad e of m aterial 37Mn
Accord ing to ISO 9809-1: 2010
Application
Rem arks
Cert. N o.
14/ 80047(E1)
For storage of compressed CO2
gases exposed to ambient
temperatures between -50˚C
and +65˚C
15/ 80018
See other cond itions, certificate is to
be refered .
Gas Cylind er tube bod y Material: 37Mn (GB 18248-2008)
Water capacity (Litre): 68
Max. Outer Diam eter (m m ): 267
Max. Working pressure: 150 bar
H yd rostatic Test pressure: 250 bar
Manufactured process: H ot form ing Manufacturing from
seam less pipe
H eat treatm ent: Quenched and tem pered
Shape of base: Concave
55
Subject: Containers
Tianjin Tianhai High Pressure
Container Co. Ltd,
N 0. 268 Jinbin Road,
Tianjin Port Free Trade Zone,
Tianjin, 300461,
Type
Seamless Steel Gas
Cylinder
Ø406x5.9mm
Details of Approval
Seam less steel gas cylind er m ad e of m aterial 30CrMo
Accord ing to ISO 9809-1: 2010
Working pressure: 60bar
H yd raulic test pressure: 90bar
Water capacity (Litre): 80 to 180
Length (m m ): 825±20 to 1650±20
Manufactured process: H ot form ing Manufacturing from
seam less pipe
H eat treatm ent: Quenched and tem pered
Shape of base: Concave
Gas Cylind er tube bod y Material:30CrMo
Application
For storage of compressed,
liquefied gases exposed to
ambient temperatures between
-40oC and +65oC
Rem arks
Cert. N o.
15/ 80043
See other cond itions, certificate is to
be refered .
56
Subject: D eck Fittings
Product: D eck Ladders (Part 1A)
Jiangyin Huangshan Marine
Fitting Co., Ltd.,
BinJiang D evelopment Area,
Jiangyin City,
Jiangsu province, 214429,
Type
12, 14, 16, 18, 20, 22,
24, 28, 32, 36, 40, 42,
44, 48, 52, 55
Details of Approval
Alum inium accom m od ation lad d er w ith revolving platform .
N om inal length (m m ):
Effective w id th (m m ):
Distance betw een steps (m m ):
Maxim um angle from horizontal:
H and rail height (m m ):
N o. of steps :
3600 to 15600
600
300
55
1000
12 to 55
Application
Marine and offshore
ind ustries for personnel use.
See Certificate for operational
lim itations and other
cond itions.
Rem arks
Cert. N o.
00/ 10030(E2)
GB/ T 14360-93
ISO 5488-1979
57
Product: Emergency Tow ing Systems
(Part 1A)
Type
Details of Approval
Application
Ansell Jones Ltd,
Unit 101 Axcess 10 Bentley
Road South,
D arlaston,
West Midlands, WS10 8LQ,
United Kingdom (UK).
100 Tonne
200 Tonne
Sm it Brackets:
BillBoard Engineering Co. Ltd,
Room 1106, Entrepot Centre,
117 How Ming Street,
Kw un Tong,
Hong Kong.
Sm it Brackets:
SWL 1,000kN
SWL 2,000kN
Sm it brackets:
2000kN SWL
Chain Stopper
Em ergency Tow ing and Single Point Mooring Equipm ent:
2000kN SWL Chain Stopper:
SWL (T)
100
200
Safe w orking load (kN ):
Chain d iam eter (m m ):
Ship DWT (tonnes):
Ship DWT (tonnes):
China N ational Shipbuilding
Equipment and Materials,
(East China) Corp.,
N o. 258 Fuxing Road (East),
20010 Shanghai,
Chain size (m m )
54
76
1,000
54
20,000 to 50,000
2,000
76
50.000 to 350,000
2,000
76
50,000 to 350,000
2000kN SWL
Panam a Bulw ark
Mounted Chock
Em ergency tow ing and single point m ooring for tankers:
PH 2402-F
PH 2402-A
Em ergency tow ing arrangem ents for tankers:
Ship DWT (tonne):
SWL(kN )
2000 (both types)
2,000
76
50,000 to 350,
DWT
 50,000 (both types)
Rem arks
Cert. N o.
Em ergency tow ing
arrangem ents for gas,
chem ical and petrochem ical
tankers
96/ 00079(E3)
Sm it brackets for em ergenm cy
tow ing system s for gas,
tankers.
11/ 00052
Em ergency Tow ing
Arrangem ents and Single
Point Mooring Equipm ent for
gas, chem ical and
petrochem ical tankers
14/ 00005
Em ergency Tow ing
Arrangem ents and Single
Point Mooring Equipm ent for
gas, chem ical and
petrochem ical tankers.
Em ergency tow ing
chem ical and petro-chem ical
tankers.
Approval
14/ 00006
Approval
97/ 00136(E3)
See Other Cond itions on Type
Approval Certificate for lim itations.
See Approved Manufacturer’s on
Type Approval Certificate for each
m ain com ponent.
58
(Part 1A)
Type
PH 2401-F
PH 2401-A
Details of Approval
Forw ard Em ergency Tow ing Arrangem ent
Aft Em ergency Tow ing Arrangem ent:
Safe Working Load (kN ):
1000
Application
For em ergency tow ing of gas,
tankers, up to 50,000 tonnes
DWT
Rem arks
Cert. N o.
98/ 00122(E3)
See Other Cond itions on certificate for
lim itations.
59
(Part 1A)
Cosalt International Ltd.,
School Road,
Oulton Broad,
Low estoft,
Suffolk, N R33 9N B,
D K Industrial Co Ltd,
511, Sinyeong-dong,
Shaha-gu,
Busan, 604-030,
Korea, Republic of.
Type
Details of Approval
Em ergency tow ing arrangem ents for tankers:
Application
Rem arks
Cert. N o.
Em ergency tow ing
tankers.
10/ 00019
Coasalt Assurance
Pack 1
SWL (kN ):
1,000
Cosalt Assurance
Pack 2
SWL (kN ):
2,000
ETS2000-DKF
ETS2000-DKA
Emergency Towing System
IMO Resolution MSC 35(63)
Part 3, Chapter 13 of Lloyd’s Register’s Rules and Regulations for
the Classification of Ships (July 2009)
Minim um Safe Working Load:
For emergency towing arrangemenrt: 1,000kN (102 tonnes-f)
For emergency towing
arrangement:
appropriate for tankers of
20,000 tonnes DWT and over
but less than 50,000 tonnes
DWT
10/ 10065
SPM 5000-DKF
Emergency Towing System and Single Point Mooring
Oil Companies International Marine Forum (OCIMF)
Recommendations for Equipment Employed in the Bow Mooring
of Conventional Tankers at Single Point Moorings (Fourth Edition
May 2007)
the Classification of Ships ( July 2010)
For emergency towing system:
For single point mooring:
appropriate for tankers of over
100,000 tonnes but not greater
that 150,000 tonnes DWT
(approx. 120,000 – 175,000
displacement)
11/ 10012
For emergency towing system :
Minimum Safe Working Load (SWL) : 2,000kN (204 tonnes-f)
For single point mooring :
Minimum Safe Working Load (SWL) : 250 tonnes-f
Safety factor: min 2.0 SWL on the yield
Yield strength :
Bow chain stopper frame/ pawl: min. 295 N/ mm 2 (SM490A)
Bow chain stopper shaft: min. 834 N/ mm 2 (SCM440)
With respect to single point m ooring,
the d esign of the bow chain stopper
for SPM5000-DKF is found in
compliance with LR July 2010 Ship
Rules, Part3, Chapter 13, Section 8.1.2
for Class notation SPM4 or DSPM4
specifying SWL, yield strength and
safety factors and the bow fairlead for
SPM5000-DKF is found in compliance
with LR July 2010 Ship Rules, Part3,
Chapter 13, Section 8.1.2 for Class
notation SPM4 or DSPM4 specifying
SWL and safety factors.
60
(Part 1A)
D K Industrial Co Ltd
...continued
Type
SPM 7000-DKF
Details of Approval
Emergency Towing System and Single Point Mooring
May 2007)
Application
Rem arks
150,000 tonnes DWT (approx.
175,000 displacement)
for SPM7000-DKF is found in
Rules, Part3, Chapter 13, Section 8.1.2
for Class notation SPM4 or DSPM4
specifying SWL, yield strength and
safety factors and the bow fairlead for
ETS4000-DKF
ETS4000S-DKF
ETS4000-DKA
ETS4000U-DKA
Fendercare Marine,
Enterprise House,
Harveys Lane,
Seething,
N orfolk, N R15 1EN ,
11/ 10012
SPM7000-DKF is found in compliance
with LR July 2010 Ship Rules, Part3,
Chapter 13, Section 8.1.2 for Class
notation SPM4 or DSPM4 specifying
SWL and safety factors.
For emergency towing system :
Minimum Safe Working Load (SWL) : 2,000kN (204 tonnes-f)
For single point mooring :
Minimum Safe Working Load (SWL) : 350 tonnes-f
Safety factor: min 2.0 SWL on the yield
Yield strength:
Bow chain stopper frame/ pawl: min. 295 N/ mm 2 (SM490A)
Bow chain stopper shaft: min. 834 N/ mm 2 (SCM440)
D K Industrial Co., Ltd.,
40, N oksansandan 361-ro,
Gangseo-gu,
Busan, 618-816,
Korea, Republic of.
Cert. N o.
Emergency Towing System
the Classification of Ships (July 2008)
For emergency towing arrangemenrt: 2,000kN (204 tonnes-f)
arrangement:
14/ 40073(E1)
Em ergency tow ing arrangem ents for tankers, consisting of the
follow ing com ponents:
Emergency Towing Equipment
for gas, chemical and
petrochemical tankers up to
350,000 Tonne DWT
96/ 00034(E4)
220 T SWL Smit Bracket;
102 T SWL Chain Stopper and Plinth Arrangement;
204 T SWL Chain Stopper and Plinth Arrangement (Bolted);
61
(Part 1A)
Type
Application
Rem arks
204 T SWL Chain Stopper and Plinth Arrangement (Welded);
102 T SWL Deck Chock;
204 T SWL Panama Chock, Bow Mounted;
102 T SWL Panama Chock;
204 T SWL Panama Deck Chock;
102 T SWL Chain stopper Plinth;
204 T SWL Tow Hook;
250 T SWL Panama Deck Mounted Chock.
Fendercare Marine ...continued
Fukushima Ltd.,
9-80 Mikaw akita-machi,
Fukushima-city,
Fukushima-Pref, 960-8054,
Japan.
Details of Approval
FH 10F
FH 10A
Forw ard em ergency tow ing arrangem ent (non pre-rigged ),
com prising fairlead , strongpoint, chafing chain, chain stopper,
and ped estal roller
Cert. N o.
96/ 00034(E4)
Marine use for tankers of
20,000 t d w t and over but less
than 50,000 t d w t
96/ 10027(E3)
50,000 t d w t and over
96/ 10029(E5)
Safe w orking load : 1,000 kN
Proof test load : 2,000 kN
Aft em ergency tow ing arrangem ent (pre-rigged ), com prising
fairlead , strongpoint, tow ing pennant w ith storage d rum and
pick-up gear w ith storage box
FH 20F
FH 20A
Forw ard em ergency tow ing arrangem ent (non pre-rigged ),
com prising fairlead , strongpoint, chafing chain, chain stopper,
and ped estal roller
Aft em ergency tow ing arrangem ent (pre-rigged ), com prising
fairlead , strongpoint, tow ing pennant w ith storage d rum and
62
(Part 1A)
Kashiw a Co Ltd,
1165-9 Kutsukake,
Bandoh-SHI,
Ibaraki-pref, 306-0515,
Japan.
Type
TK20F
Details of Approval
Forw ard em ergency tow ing arrangem ent com prising
fairlead / strong point, stopper point, chafing chain and ped estal
roller
Application
20,000 t ones DWT and over
but less than 50,000 tones
DWT
Rem arks
Cert. N o.
96/ 10026(E6)
Work load : 1,000 kN
63
(Part 1A)
Kashiw a Co Ltd ...continued
Type
TK20A
Details of Approval
Aft em ergency tow ing arrangem ent com prising fairlead / strong
point, stopper ring, tow ing pennant w ith storage d rum and
Application
Rem arks
20,000 t ones DWT and over
but less than 50,000 tones
DWT
Cert. N o.
96/ 10026(E6)
Work load : 1,000 kN
TK40F
Forw ard em ergency tow ing arrangem ent com prising fairlead ,
chain stop per, chafing chain and ped estal roller
50,000 tones DWT and over
Working load : 2,000 kN
TK40A
Aft em ergency tow ing arrangem ent com prising fairlead / strong
point, stopper ring, tow ing pennant w ith storage d rum and
Marine u se for tankers of
50,000 tones DWT and over
Working load : 2,000 kN
KTMI Co., Ltd.,
17, Hw ajeonsandan 2-ro,
Gangseo-gu,
Busan, 618-280,
Korea, Republic of.
CBETS2000A
Aft em ergency tow ing system com bined w ith escorting pull back
system .
IMO Resolution MSC 35 (63)
OCIMF Recommendations for ‘Requirements for emergency
towing escorting and pull-back’ (3rd edition-2007)
Em ergency tow ing and
escorting of tankers of 20,000 t
d w t and over.
15/ 40081
Em ergency tow ing
chem ical or petrochem ical
tankers up to 350.000 tonnes
DWT
97/ 00096(E3)
SWL = 1,000 kN
Radez d.d.,
2, ulica 15,
20 271 Blato,
Croatia.
601.00.001
Aft Em ergency Tow ing Arrangem ent w ith Safe Working Load of
1000kN
606.11.001
Forw ard Em ergency Tow ing Arrangem ent w ith Safe Working
Load of 2000kN
606.13.001
Forw ard Em ergency Tow ing Arrangem ent w ith Safe Working
Load of 2000kN
64
(Part 1A)
Sae Jin Intech Co Ltd.,
17, Hw ajeonsandan 2-ro,,
Gangseo-gu,
Busan, 618-280,
Korea, Republic of.
Type
For em ergency
tow ing system s
Details of Approval
Application
Lloyd ’s Register’s Rules and Regulations for the Classifica tion of
Ships (July 2009)
SWL = 2,000 kN (204 tonnes-f)
Tow ing system for oil, gas,
tankers of 50,000 tonnes DWT
and over
Rem arks
Cert. N o.
01/ 10003(E10)
With regard to ‘Und er Deck Type’,
the Signal d evice for the d etection of
gaps betw een socket and strongpoint
is optional and is not Class m atter
65
(Part 1A)
Sae Jin Intech Co Ltd.
...continued
Type
Details of Approval
Application
Rem arks
ETS-4000F-SJ
N on pre-rigged system (Forw ard of ship)
for ETS-4000FSR-SJ is found in
Rules, Part 3, Chapter 13, Section 8.1.2
for the Class notation SPM4 or
ETS-4000A-SJ
Pre-rigged system (Aft of ship)
D SPM4 specifying SWL, yield
strength and safety factors and the
bow fairlead for ETS-4000FSR-SJ is
found in com pliance w ith LR July
2013 Ship Rules, Part 3, Chapter 13,
Section 9.1.2 for the Class notation
SPM4 or D SPM4 specifying SWL and
safety factor.
ETS-4000FSB-SJ
N on pre-rigged system (Forw ard of ship) w ith Sm it bracket type
chain stopper
ETS-4000ASR-SJ
ETS-4000ASR-SJ
(Und er Deck Type)
ETS- 4000FSR-SJ
For single point
m ooring
ETS- 4000FSR-SJ
Cert. N o.
01/ 10003(E10)
N on pre-rigged em ergency tow ing system (Forw ard of ship)
Oil Com panies International Marine Forum (OCIMF)
Recom m end ations for Equipm ent Em ployed in the Bow Mooring
of Conventional Tankers at Single Point Moorings (Fourth
Ed ition May 2007)
Lloyd ’s Register’s Rules and Regulations for the Classification of
Ships (July 2009)
Bow chain stopper
SWL = 200 tonnes-f
Safety factors: m in. 2.0 SWL on the yield
Yield Strength:
Bow chain stopper fram e frame: min. 315 N/ mm 2 (SM490A)
Bow chain stopper pawl: min. 440 N/ mm 2 (SCMn2B)
Bow chain stopper shaft: min. 500 N/ mm 2 (S45C-H)
Single point m ooring for oil,
gas, chem ical and
petrochem ical tankers of over
100,000 tonnes DWT or less
(approx. 120,000
d isplacem ent)
66
(Part 1A)
Type
Details of Approval
Application
Rem arks
Cert. N o.
Bow fairlead
SWL = 200 tonnes-f
Safety factors: m in. 2.0 SWL on the yield
Yield Strength:
Bow fairlead : min. 280 N/ mm 2 (SCW480A)
67
(Part 1A)
Sae Jin Intech. Co Ltd,
#579-5, Hw ajeon Industrial
Complex,
Hw ajeon-dong,
Gangseo-gu,
Busan, 621-280,
Korea, Republic of.
Type
Details of Approval
Application
Rem arks
Cert. N o.
ETS-2000F-SJ
N on pre-rigged em ergency tow ing system (Forw ard of ship)
Ships, July 2011
SWL = 1,000 kN (102 tonnes-f)
N on pre-rigged em ergency
tow ing system for oil, gas,
tankers
01/ 10064(E4)
ETS-2001A-SJ
(On d eck type)
Pre-rigged em ergency tow ing system (Aft of ship)
Ships, July 2011
SWL = 1,000 k kN (102 tonn es-f)
Pre-rigged em ergency tow ing
system for oil, gas, chem ical
and petrochem ical tankers
ETS-2000A-SJ
(Und er Deck type)
Pre-rigged em ergency tow ing system (Aft of ship)
Ships, July 2011
SWL = 1,000 k kN (102 tonnes-f)
Pre-rigged em ergency tow ing
system for oil, gas, chem ical
and petrochem ical tankers
With regard to ‘Und er Deck type’ the
signal d evice for the d etection of gaps
betw een socket and strong points is
optional and is not Class m atter.
KBETS-4000AS-SJ
system .
OCIMF Recommendations for Ships’ Fitting for Use with Tugs
with Particular Reference to Escorting and Other High Load
Operations (First Edition-2002)
SWL = 2,000 kN
Em ergency tow ing and
d w t and over.
05/ 10010(E3)
ETS/ SPM5000F-SJ
Emergency Towing System and Single Point Mooring System
May 2012)
08/ 10012(E1)
68
(Part 1A)
Type
Details of Approval
‘Appendix E, Tanker Mounted SPM Fittings’ of ‘OCIMF Mooring
Equipment Guidelines 3rd Edition (MEG3)’ as part extract from
‘Oil Companies International Marine Forum (OCIMF)
May 2007)’
Application
Rem arks
Cert. N o.
(approx. 120,000 – 175,000
displacement)
69
(Part 1A)
Type
Details of Approval
Application
Rem arks
For emergency towing system : 2,000kN (204 tonnes-f)
For single point mooring: 250 tonnes-f
Sae Jin Intech. Co Ltd
...continued
ETS/ SPM7000F-SJ
Emergency Towing System and Single Point Mooring System
May 2012)
Cert. N o.
08/ 10012(E1)
May 2007)’
For emergency towing system : 2,000kN (204 tonnes-f)
Shanghai ETA Manufacturing
Co.,Ltd,
N o.1861; Yangshupu Road,
Shanghai,200090,
YT3500-F
Emergency Towing Arrangement and Single Point Mooring
IMO resolution MSC 35(63)
May 2007)
arrangement:
Appropriate for tankers of
Appropriate for tankers of over
150,000 tonnes
DWT(approx..175,000
displacement)
Expires: 13 February. 2021
16/ 80003(E1)
70
(Part 1A)
Type
Details of Approval
Application
Rem arks
Cert. N o.
Lloyd’s Register’s Rules and Regulations for the Classification of
Ships (July 2014)
Minimum Safe Working Load:
For Emergency Towing arrangement: 2000kN(204 tonnes-f)
71
(Part 1A)
Shanghai ETA Manufacturing
Co.,Ltd ...continued
Type
YT1000-F & YT1000A
YT2000-F & YT2000A
Details of Approval
Application
Emergency Towing Arrangement , Escorting Pull-back System and
Single Point Mooring
arrangement:
IMO resolution MSC 35(63)
May 2007)
YT1000-F and YT1000-A
but less than 50,000 tonnes
DWT
Recommendations for Ship’s Fittings for Use with Tugs (First
Edition 2002)
Ships (July 2014)
YT2000-F and YT2000-A
Minimum Safe Working Load:
For Emergency Towing arrangement:
YT1000-F and YT1000-A 1,000kN (102 tonnes-f)
YT2000-F and YT2000-A 2,000kN (204 tonnes-f)
For escorting pull-back system
YT2000-A with bollard and chock: 200 tonnes-f
YT1000-F and YT2000-F: 200 tonnes-f
For escorting pull-back system:
YT2000-A with bollard and
chock:
Rem arks
Expires: 13 February. 2021
Cert. N o.
16/ 80004(E2)
YT1000-F and YT2000-F
Appropriate for tankers of over
100,000 tonnes DWT or less
72
(Part 1A)
SSP Machine Tech Co Ltd,
1166-94 Moogi-Ri,
Chilw on-Myun,
Haman-Gun,
Gyeongsangnam-D o, 637-922,
Korea, Republic of.
Type
C-SM200A:
Emergency towing
system with escorting
and pull back system
O-SM200F:
Emergency towing
system
Details of Approval
Part 3, Chapter 13, Section 10 of Lloyd’s Register Rules and
Regulations for the Classification of Ships (July 2012)
Recommendations of Oil Companies International Marine Forum
(OCIMF) Recommendations for Ships’ Fitting for Use with Tugs
(First Edition-2002)
For emergency towing system (C-SM200A & O-SM200F):
Min. SWL = 2,000kN (204 tonnes-f)
For escorting and pull back system (C-SM200A):
Min. SWL = 200 tonnes-f
Application
For emergency towing system
(C-SM200A & C-SM200F):
For emergency towing system
(C-SM200A & C-SM200F):
Rem arks
Cert. N o.
12/ 10054
73
(Part 1A)
Taizhou City Wanli Ship
Machinery Manufacturing
Co.,Ltd,
Qiaotou Tow n, Jiangyan
D istrict,
Taizhou City,
Jiangsu Province,
Type
WL/ YJ-ZLQ-A76250T
Application
Single Point Mooring System and emergency towing for tankers:
Safe Work Load: 2450kN.
Chain diameter: 76mm
Appropriate for tankers
Appropriate for 100,000
tonnes DWT but less than
150,000 tonnes DWT
Single Point Mooring System and emergency towing for tankers:
Safe Work Load: 3430kN.
Chain diameter: 76mm
Appropriate for tankers
Appropriate for 150,000
tonnes DWT and over
KETA-40F and
KETA-45F
Forw ard em ergency tow ing system :
Lloyd ’s Register Rules and Regulations for
the Classification of Ships
SWL = 2,000 kN
Forw ard em ergency tow ing
system for tankers of 50,000
d w t and over
KETA-40A
Aft em ergency tow ing system , w ith tw o arrangem ents of fixed
and m ovable strong points:
SWL = 2,000 kN
Aft em ergency tow ing system
for tankers of 50,000 d w t and
over
KETA-40A
(Und er d eck type)
Aft em ergency tow ing system , Und er d eck type:
SWL = 2,000 kN
for tankers of 50,000 d w t and
over
WL/ YJ-ZLQ-A76350T
Tanktech Co Ltd,
Saha-gu,
Busan, 604-818,
Korea, Republic of.
Details of Approval
Rem arks
Cert. N o.
Expires: 20 Jan. 2021
16/ 80001
01/ 10045(E8)
74
(Part 1A)
Type
Details of Approval
Application
KETSP-40A
system .
IMO Resolutio MSC 35 (63)
‘Section 3.4 Requirements for Emergency Towing, Escorting and
Pull-Back’ of ‘OCIMF Mooring Equipment Guidelines 3rd Edition
(MEG3)’ which supersedes OCIMF Recom m end ations for Ships’
Fitting for Use w ith Tugs w ith Particular Reference to Escorting
and Other H igh Load Operations (First Ed ition -2002)
SWL = 2,000 kN
Emergency towing and
dwt and over.
KETSP-20A
system .
IMO Resolutio MSC 35 (63)
(MEG3)’ which supersedes OCIMF Recom m end ations for Ships’
Fitting for Use w ith Tugs w ith Particular Reference to Escorting
and Other H igh Load Operations (First Ed ition -2002)
SWL = 1,000 kN
Emergency towing and
dwt and over but less than
50,000 t dwt.
KETA-45F-25
Emergency Towing Systems and Single Point Moorings
May 2007)
For emergency towing systems:
Rem arks
Cert. N o.
04/ 10021(E2)
08/ 10017(E2)
75
(Part 1A)
Type
Details of Approval
May 2007)’
For emergency towing systems: 2,000kN (204 tonnes-f)
For single point moorings: 250 tonnes-f
Application
Rem arks
Cert. N o.
For single point moorings:
(approx. 120,000 – 175,000
displacement)
76
(Part 1A)
Type
KETA-45F-35
Details of Approval
Emergency Towing Systems and Single Point Moorings
May 2007)
Application
Rem arks
For emergency towing systems:
For single point moorings:
Cert. N o.
08/ 10017(E2)
May 2007)’
For emergency towing systems: 2,000kN (204 tonnes-f)
For single point moorings: 350 tonnes-f
Tanktech Co. Ltd.,
Gangseo-gu,
Busan, 618-270,
Korea, Republic of.
KETA-20A
Aft em ergency tow ing system com prising fairlead , strongpoint,
tow ing pennant w ith storage d rum and pick-up gear w ith
storage box
Lloyd ’s register Rules & Regulations for the Classification of
Ships
SWL = 1,000 kN
for tankers of 20,000d w t and
over but less than 50,000 d w t
KETA-20A
(Und er Deck Type)
Aft em ergency tow ing system , Und er d eck type
Lloyd ’s register Rules & Regulations for the Classification of
Ships
SWL = 1,000 kN
for tankers of 20,000d w t and
over but less than 50,000 d w t
15/ 40047(E4)
77
Product: Escorting Pull-Back System (Part 1A)
D K Industrial Co., Ltd.,
40, N oksansandan 361-ro,
Gangseo-gu,
Busan, 618-816,
Korea, Republic of.
Kashiw a Co Ltd,
1165-9 Kutsukake,
Bandoh-SHI,
Ibaraki-pref, 306-0515,
Japan.
Type
Details of Approval
EPBS4000S-DK
(Securing type):
Escorting and pull
back system
EPBS4000C-DK
(Combine type):
Escorting and pull
back system
combined with
emergency towing
system
OCIMF Recommendations for Ships’ Fitting for Use with Tugs
with Particular Reference to Escorting and Other High Load
Operations (First Edition-2002)
Part 3, Chapter 13, Section 9 of Lloyd’s Register Rules and
Regulations for the Classification of Ships (July 2014)
TK40A-FS, TK20A-FS
(fairlead & strong
point)
TK40-SP, TK20-SP
(strong point)
Fittings for Tug Escorting/ Pull-Back
Application
Rem arks
Cert. N o.
EPBS4000S-DK (Securing type):
Escorting of tankers of 50,000
tonnes DWT and over
EPBS4000C-DK (Combine
type): Emergency towing and
escorting of tankers of 50,000
tonnes DWT and over
14/ 40074(E1)
TK20A-FS & TK20-SP:
dwt and over but less than
50,000 t dwt.
06/ 10011(E1)
SWL = 2,000 kN
Minimum SWL (metric tonnes) :
100 (Type TK20A-FS & TK20-SP)
200 (Type TK40A-FS & TK40-SP)
OCIMF Mooring Guidelines 3rd Edition (MEG 3)
TK40A-FS & TK40-SP:
dwt and over.
78
Product: Fenders (Part 1A)
Yantai Taihong Rubber Co,
Ltd.,
N o.9 Sheng Quan D ong Road,
Lai Shan D istrict,
Yantai City 264003,
Shandong Province,
Type
Cone Fender-CONE
series,
Arch Fender-DGH
series,
Cell fender-YGCH
series,
Details of Approval
Rubber Fend er for m ounting on quay
Application
Rem arks
Cert. N o.
Mounted on quay
14/ 80008(E1)
Mounted on quay
14/ 80009(E1)
Cone Fender-CONE series
CONE300, CONE350, CONE400, CONE500. CONE600,
CONE700,CONE800,CONE900,CONE1000,CONE1100,CONE1150
,CONE1200,CONE1300,CONE1400,CONE1600, CONE1800,
CONE2000
Arch Fender -DGH series
DGH150*(1000, 1500, 2000, 2500, 3000, 3500);
DGH200*(1000, 1500, 2000, 2500, 3000, 3500);
DGH250*(1000, 1500, 2000, 2500, 3000, 3500);
DGH300*(1000, 1500, 2000, 2500, 3000, 3500);
DGH400*(1000, 1500, 2000, 2500, 3000, 3500);
DGH500*(1000, 1500, 2000, 2500, 3000, 3500);
DGH600*(1000, 1500, 2000, 2500, 3000, 3500);
DGH800*(1000, 1500, 2000, 2500, 3000, 3500);
DGH1000*(1000, 1500, 2000, 2500, 3000, 3500).
Cell Fender-YGCH series
YGCH400H, YGCH500H, YGCH630H, YGCH800H, YGCH1000,
YGCH1150H, YGCH1250H, YGCH1450H,
YGCH1600H,YGCH1700H,YGCH2000H, YGCH2250H,
YGCH2500H, YGCH3000H.
Leg Fender-ME series
Rubber Fend er for m ounting on quay
Leg fender-ME series
ME300, ME400, ME500, ME550, ME600, ME750, ME800, ME1000,
ME1250, ME1450, ME1600.
79
Product: Mooring Equipment (Part 1A)
Fendercare Marine,
Enterprise House,
Harveys Lane,
Seething,
Type
Details of Approval
The following mooring fittings were appraised
against requirements of Lloyds Register Rules and
Regulations for the Classification of Naval Ships,
January 2013
Application
Shipboard mooring fittings for
on board application in naval
ships
Rem arks
Cert. N o.
14/ 00077
50 T SWL Shell Bollard
85 T SWL C20 Chock
80
Product: Tow ing Bollards (Part 1A)
Type
Fendercare Marine,
Enterprise House,
Harveys Lane,
Seething,
100T
200T
Sae Jin Intech Co Ltd.,
17, Hw ajeonsandan 2-ro,,
Gangseo-gu,
Busan, 618-280,
Korea, Republic of.
EPB2000PC-SJ
Details of Approval
Application
Tug tow ing bollard :
Safe w orking load (T):
100T
100
200T
200
Escorting Pull-Back System (chock and strong point)
Safe w orking load : 200 tonnes
Test load : 400 tonnes
Rem arks
Cert. N o.
Marine use w ith tugs for
escorting and other high load
operations.
05/ 00016(E3)
Marine use with tugs for
operations
03/ 10010(E3)
Marine use with tugs for
operations
03/ 10033(E2)
‘Section 3.4 Requirements for Emergency Towing Escorting and
Pull-Back’ of ‘OCIMF Mooring Equipment Guidelines 3rd Eddition
(MESG)’ which supersedes OCIMF Recommendations for Ships’
Fitting for Use with Tugs (First Edition, 2002).
Tanktech Co Ltd,
Saha-gu,
Busan, 604-818,
Korea, Republic of.
KESP-40
Escorting Pull-Back System (chock and strong point)
Safe w orking load : 200 tonnes
Test load : 410 tonnes
(MEG3)’ which supersedes OCIMF Recommendations for Ships’
Fitting for Use with Tugs (First Edition, 2002).
81
Subject: Engine Exhaust
Product: Exhaust Gas Systems (Part 1A)
ABB Turbo Systems Ltd.,
Bruggerstraße 71a,
CH-5401 Baden,
Sw itzerland.
Type
TPC
Details of Approval
Diesel Exhaust Gas Turbocharger
Type/ Series
Speed
Tem perature
(rps m ax.)
TPC 47
TPC 49
TPS.. D/ E, TPS.. -F,
TPS.. DV2/ EV2,
TPS.. FV
Application
(°C m ax)
1132
990
Cert. N o.
Exhaust gas turbo-charger on
diesel engines for marine,
offshore and Indus-trial
services
04/ 20017(E2)
As exhaust gas turbocharger at
diesel and gas engines for
marine, offshore and industrial
services.
04/ 20040(E6)
750
750
Exhaust gas turbocharger with radial compressor and turbine,
internal plain bearings using engine lubrication oil system. V
versions with variable turbine geometry replacing the stationary
nozzle ring in gas inlet casing.
Maximum exhaust gas temperature before turbine:
for TPS.. D/ E and TPS.. F:
- with one gas inlet:
750°C
- with multiples gas inlets:
for TPS.. DV2 / EV2 and TPS.. FV: 710°C
Rem arks
700°C
Maximum operational speed [rps]:
TPS44
TPS48 TPS52
TPS57
TPS61
D, E
1065
895
730
615
F31, F32
1232
1036
868
709
596
F33
1224
1028
862
704
592
DV2, EV2 730
615
FV31, FV32 709
596
FV33
704
592
Compressor pressure ratio:
TPS..D & DV2 up to 4.2; TPS..E & EV2 and TPS.. F33 / FV33
up to 4.7;
TPS..F31 / FV31 & F32 / FV32 up to 5.0;
82
Type
Details of Approval
Application
Rem arks
Cert. N o.
Other Conditions:
A Custom er Part Exchange Program for recond itioning of
turbine shafts w ill be provid ed for types TPS48, TPS52 and
TPS57.
TPL
Exhaust gas turbocharger
Ratings, see certificate
As exhaust gas turbocharger on
diesel engines for marine,
offshore and industrial
services. TPL..-A and TPL..-C
04/ 20048(E10)
83
Type
Details of Approval
Application
Rem arks
are used for 4-stroke diesel
engines, TPL..-B is used for 2stroke d iesel engines, TPL..BA is fitted w ith an ad d itional
em ergency lubrication oil
tank.
TPL..V... is available with
Variable Turbine Geometry
(VTG)
ABB Turbo Systems Ltd.
...continued
TPR61
Exhaust gas turbocharger with radial compressor and turbine,
internal plain bearings using engine lubrication oil system.
services.
Cert. N o.
04/ 20048(E10)
05/ 20050(E2)
Ratings:
750°C
TPR61-A10:
615
TPR61-F32 & F33: 592
Compressor pressure ratio:
TPR61-A10:
4.2
TPR61-F32 & F33: 5.0
A130-H / M, A135H / M,
A140-H / M, A145H / M,
A150-M, A155-M,
A165-M/ L, A170-L,
A175-L,
A180-L, A185-L,
A190-L,
A265-L, A270-L, A
275-L, A280-L
Exhaust gas turbocharger with oil or water cooled bearing housing,
different outer dimensions of radial bearings, H, M and L types for
different service concepts on high, medium and low speed engines.
The turbines are equipped with variable guide vanes optionally.
As exhaust gas turbocharger
for high, m ed ium and low
speed d iesel and gas engines in
m arine, offshore and ind ustrial
services
08/ 20027(E6)
84
Type
Details of Approval
Application
Rem arks
Cert. N o.
- up to A145 for turbine casings with one gas inlet:
750°C
- up to A145 for turbine casings w ith m ultiple gas inlet: 700°C
- A165-M:
650°C
- A165-L, A170-L, A175-L, A180-L, A185-L, A190-L: 550°C
- A265-L, A270-L, A275-L, A280-L:
550°C
85
Type
Details of Approval
Type of:
Turbocharger
...continued
Application
A130-H / M61, 65-67 TV01- 05,
TV11, 12
A135-H / M61, 65-67 TV01- 05
TV11, 12
A140-H / M61, 65-67 TV01- 05
TV11, 12
CV01-03, 16
Maxim um
oper ational
Speed [rps]
1095–1016
CV01-03, 16
917- 851
CV01-03, 16
750- 696
A145-H / M61,65,66
CV01-03, 16
629- 599
A150-M66, 67
A155-M66, 67
A165-H / M65
A165-L32,34,35,37
A170-L32,34,35,37
A175-L32,34,35,37
A180-L32,34,35,37
A185-L32,34,35,37
Turbine
TV01- 05
TV11, 12
TV12
TV12
TV07
TV08, 09
TV08, 09
TV08, 09
TV08, 09
TV08, 09
Com pressor
CV03, 16
CV03, 16
CV05
CV06-09
CV06-09
CV06-09
CV06-09
CV06-09
Rem arks
Cert. N o.
08/ 20027(E6)
561-547
472-460
410
410-374
355-324
295-269
261-238
234-213
A190-L32,34,35,37
TV08, 09 CV06-09
212-194
A265-L
TV08, 09 CV21
361
A270-L
TV08, 09 CV21
313
A275-L
TV08, 09 CV21
260
A280-L
TV08, 09 CV21
230
For types A130 to A155 the un-cooled versions of im pellers w ith
the end ing -51, -55, -56 and -57 are w ithin the sam e speed range
as the cooled versions -61, -65, -66 and -67.
Compressor pressure ratio: up to 6.0
Power 2 340-H/ M
2-stage radial high pressure / radial low pressure turbocharging
system with oil or water cooled bearing housing, different outer
dimensions of radial bearings, H and M types for different service
concepts on high, medium and low speed engines.
As 2-stage exhaust gas
turbocharger for high and
medium speed diesel and gas
engines in marine, offshore and
industrial services.
11/ 20031(E1)
86
Type
Details of Approval
Application
Rem arks
Cert. N o.
Ratings:
Maximum exhaust gas temperature before
high pressure turbine:
700°C
87
Type
Details of Approval
Turbocharger Turbine
Type:
Type:
...continued
P135 –H/ M45
P145 –H/ M45
Z140 –H/ M74
Z140 –H/ M75
Z140 –H/ M76
TV10
TV10
TV01
TV01
TV01
Application
Rem arks
Compressor Max.
Type:
operational
speed [rps]:
CV11
854
CV11
585
CV15
715
CV10
678
CV12
655
Cert. N o.
11/ 20031(E1)
Compressor pressure ratio
- at high pressure side:
3.3
- total
:
about 10
TPS44 -H/ -M
exhaust gas turbocharger
Ratings:
750°C for turbine casings with one gas inlet
700°C for turbine casings with multiples gas inlets
As 2-stage exhaust gas
turbocharger for high and
medium speed diesel and gas
engines in marine, offshore and
industrial services.
14/ 20059
TPS44-H31/ -M31
1232
TPS44-H32/ -M32
1232
TPS44-H33/ -M33
1224
Maximum allowable compressor
pressure ratio at n max:
5.0
88
Borg Warner Turbo Systems,
Roydsdale Way,
Eurow ay Industrial Estate,
Bradford, BD 4 6SE,
Type
S500, S3B
Details of Approval
Application
H igh speed rotating exhaust gas turbocharger.
Model
Turbine
Com pressor
S500
120
138
S3B
88
93
Max. tip
speed (m/sec)
Turbine
Com pressor
(hipped )
510
560
510
540
Max. gas
inlet temp.
H iSim o
SG Ductile
700ºC
650ºC
700ºC
650ºC
Max. dia.
(mm)
at d iesel and gas engines for
m arine, offshore and
ind ustrial services
Rem arks
Cert. N o.
07/ 00008(E2)
Other Cond itions.
89
Cummins Turbo Technologies,
St Andrew s Road,
Huddersfield, HD 1 6RA,
Type
H X40
Details of Approval
Application
Exhaust gas turbocharger w ith rad ial com pressor and turbine,
internal plain bearings using engine lubrication oil system .
Ratings:
E and X
Maxim um exhaust gas tem perature
before turbine:
760 ºC
Maxim um operational speed :
130,000 rpm
internal plain bearings using engine lubricating oil system .
group
model
maximum
operational
speed, rpm
Maximum exhaust
temp. before
turbine, °C
heavy duty
H E551M
H X50
H X55
H X55WM
H X60
103000
115000
115000
103000
760
760
760
725
760
HHP
H E851
H X82
H X83
79000
79000
79000
760
760
760
medium duty
H 1CM
H X30W
H X35M
H X40M
H Y35W
130000
130000
130000
130000
140000
760
760
760
760
760
Rem arks
Cert. N o.
06/ 00040(E1)
10/ 00008(E1)
90
Cummins Turbo Technologies
...continued
Type
Mod el H X80 only of
H E800FG Series
Details of Approval
Application
internal plain bearings using engine lubrication oil system .
Ratings:
D eutz AG,
Ottostraße 1,
Köln 51149,
Germany.
2SA, S2AW, S2B,
S2BW, S200, S200W,
S300, S300W
Maxim um exhaust gas tem perature
before turbine:
760 ºC
Maxim um operational speed :
79,000 rpm
Exhaust gas turbocharger
Turbine
Wheel
[m m ]
Com pressor
Wheel
[m m ]
Speed
(rpm )
Exhaust Gas
Tem p.
[°C]
S2A,
70 Inco 713C
69 C354 T61
136000
633
S2AW
74 Inco 713C
69 C354 T61
S2B,
61 Inco 713C
69 C354 T61
150000
S2BW
74 Inco 713C
76 Inco 713C
83 C354 T61
83 C354 T61
124200
S200,
70 Inco 713C
76 C354 T61
147000
S200W 74 Inco 713C
76 C354 T61
S300,
76 Inco 713C
83 C354 T61
129000
S300W 80 Inco 713C
87 C354 T61
141000
Rem arks
Cert. N o.
16/ 00037
As exhaust turbochargers for
DEUTZ engines
BF6L913/ C,
BF4/ 6M1013M/ MC/ MCP,
BF6/ 8M1015M/ MC
08/ 20061(E1)
640
91
KBB Kompressorenbau
Bannew itz GmbH,
Windbergstrasse 45,
01728 Bannew itz,
Germany.
Type
H PR 3000, 4000,
5000, 6000
Details of Approval
Exhaust gas turbo charger w ith tw o inner slid e bearings and
separate lubrication oil supply from d iesel engine lube oil
system .
Application
As exhaust gas turbo ch arger
on d iesel engines for m arine,
services.
Rem arks
Cert. N o.
01/ 20008(E4)
HPR 3000, HPR 4000, HPR 5000, HPR 6000
Max. Speed: 58000 min -1 48000 min -1 41500 min -1 34600 min -1
Max. Temp.:
650 °C
Compr. Flow: 2.1 kg s-1 2.9 kg s-1
3.9 kg s-1 5.5 kg s-1
Rate at n max
92
KBB Kompressorenbau
Bannew itz GmbH ...continued
Type
M 40
Rem arks
Cert. N o.
Details of Approval
Application
Exhaust gas turbocharger w ith axial turbine, tw o inner slid e
bearings and separate lubricating oil supply from d iesel engine
lubricating system .
As exhaust gas turbo chargers
offshore and ind ustrial services.
94/ 20019(E4)
As exhaust gas turbo chargers
offshore and ind ustrial services.
10/ 20047(E3)
As exhaust gas turbo-chargers
for d iesel en-gines
07/ 20034(E4)
Max. speed: 39,000 rpm
Max. temperature: 650° C
Mass flow rate at max. speed: 3,1 kg/ s
Kompressorenbau Bannew itz
GmbH,
Windbergstraße 45,
01728 Bannew itz,
Germany.
ST3
ST4
ST5
ST6
ST7
Exhaust gas turbocharger with radial turbine, inner slide bearings
and separate lubricating oil supply from the diesel engine
lubricating system.
Compressor Max. Speed
Wheel
(rpm)
ST3
ST4
ST5
ST6
ST7
MAN D iesel & Turbo SE,
Stadtbachstraße 1,
86224 Augsburg,
Germany.
TCA33,
TCA44,
TCA55, TCA66,
TCA77, TCA88
CAxx
CCxx
CAxx
CCxx
61300
56800
51100
47300
Max. Temperature
at
Turbine Entry (°C)
650
650
650
650
CAxx
CCxx
CZxx
CAxx
CCxx
CAxx
CCxx
42600
39400
36400
35500
32900
29600
26300
650
650
650
650
650
650
650
Axial exhaust gas turbochargers
93
Type
Details of Approval
Max. speed [rpm]
TCA33
TCA44
TCA55
TCA66
TCA77
TCA88
31700
22900
20970
17650
14700
12200
Application
Rem arks
Cert. N o.
Max. temperature [°C]
650
530
650
650
620
650
94
MAN D iesel & Turbo SE
...continued
Type
NRxx/ S
Details of Approval
Rad ial exhaust gas turbochargers.
Application
Rem arks
Cert. N o.
As exhaust gas turbochargers
for d iesel engines
07/ 20041(E1)
for d iesel engines
08/ 20004(E1)
for d iesel engines
08/ 20007(E1)
Max. engine Max. speed Max. temperature
power [kW]
[rpm]
[°C]
NAxx/ S
NR12/ S
NR12/ RS
670
670
75000
75000
720
650
NR14/
NR17/
NR20/
NR24/
NR29/
NR34/
950
1350
1870
2690
3820
5400
62200
52600
44700
37300
31300
26300
650
650
650
650
650
650
S
S
S
S
S
S
Axial exhaust gas turbochargers.
NA29/
NA34/
NA40/
NA48/
NAxx/ T9
S
S
S
S
Max. speed [rpm]
31300
26300
22400
18600
650
650
650
650
Axial exhaust gas turbochargers.
NA57/ T9
NA70/ T9
Max. speed [rpm]
15000
12200
650
620
95
Type
TCR
Details of Approval
Application
Rad ial exhaust gas turbochargers.
Max.
TCR 10
TCR 12
TCR 16
TCR 18
TCR 20
TCR 22
1200
Max. speed
Max.
engine power continuous / short time
operating
[kW]
[rpm]
550
85000 / 85000
800
70900 / 72100
1600
49100 / 49600
2350
3400
5800
40500 / 40900
33600 / 34000
25800 / 26000
59100 / 59700
for d iesel engines
Rem arks
Cert. N o.
10/ 20041(E2)
temperature
[°C]
700
650
650
650
650
650TCR 14
650
96
MTU Friedrichshafen GmbH,
Maybachplatz 1,
88045 Friedrichshafen,
Germany.
Type
ZR 265
Details of Approval
Exhaust Gas Turbocharger
Turb. w heel Com p. w heel
d ia. (m m )
d ia. (m m )
245
ZR 175
ZR 195
ZR 205
T13
Application
265 Ti
Revs./ m in
Exh. gas
tem p. (°C)
40950
Engine Series 4000 Mx3
Turbine Compressor
Speed
Exhaust Gas
Wheel
Wheel
Temp.
[mm]
[mm]
[rpm]
[°C]
 158
 180
 185
 118
 158
 180
on MTU-engines,
series 8000
00/ 20060(E2)
on MTU engines, series 4000
Mx3, 4000 Mx3-Workboat,
4000 Px3 and 4000 Mx4
08/ 20057(E3)
 179 Ti
63.500 750
 205 Ti
55.800 750
 210 Ti+Al
54.200
750
Engine Series 4000 Mx3 - Workboat
Turbine Compressor
Wheel
Wheel
[mm]
[mm]
T13
ZR 175
ZR 195
Cert. N o.
750
Exhaust gas turbochargers
ZR 175
ZR 195
ZR 205
Rem arks
 135 Ti+Al
 179 Ti+Al
 205 Ti
Speed
[rpm]
Exhaust Gas
Temp.
[°C]
82.000 750
61.900 750
55.800
750
Engine Series 4000 Px3
Turbine Compressor
Speed
Exhaust Gas
Wheel
Wheel
Temp.
[mm]
[mm]
[rpm]
[°C]
ZR 175
ZR 195
ZR 205
 158
 180
 185
 179 Al
 205 Al
 210 Al
63.500 750
55.800 750
54.200 750
97
Type
Details of Approval
Turbine Compressor
Wheel
Wheel
[mm]
[mm]
MTU Friedrichshafen GmbH
...continued
T13
ZR 175
ZR 175
ZR 195
ZR3.165.I
 130 Ti
 179 Ti
 179 Al
 205 Ti
Turbine
Wheel
[mm]
ZR3.165.I
ZR5.255.I
 158
 225
[rpm]
Exhaust Gas
Temp.
[°C]
Exhaust Gas
Temp.
[°C]
T13
Compressor
Wheel
[mm]
 115 Al
Mx4
15/ 20039
Asexhaust gas turbochargers
Mx0 and
Engine Series 2000 CR
15/ 20049
62.400 750
33.000
650
Turbine
Wheel
[mm]
 103
Cert. N o.
85.000 750
62.500 750
61.500 750
54.500 750
Compressor Speed
Wheel
[mm]
[rpm]
 165 Al
 255 Al
Rem arks
08/ 20057(E3)
Speed
ZR5.255.I
T13
 118
 158
 158
 180
Application
Speed
Exhaust Gas
Temp.
[rpm]
[°C]
96.300
750
Engine Series 2000 CR
T13
T13
T13
Turbine
Wheel
[mm]
 114
 103
 118
Compressor
Wheel
[mm]
 125 Al
 117 Al
 130 Al
Speed
[rpm]
88.500
97.400
85.000
Exhaust Gas
Temp.
[°C]
800
800
800
98
Type
Details of Approval
T13
T13
T13
T13
T13
 114
 103
 114
 123
 118
 130 Al
 125 Al
 130 Al
 135 Al
 135 Al
85.000
88.000
88.000
82.500
82.000
Application
Rem arks
Cert. N o.
800
800
800
800
800
99
...continued
Type
ZR 110
Details of Approval
H igh speed rotating exhaust gas turbochargers.
Turbine Wheel Compressor Wheel
[mm]
[mm]
 108
 108
ZR 140
 116 Al
 116 Ti
 130
 130
 140 Al
 140 Ti
88.000
90.000
Cert. N o.
for MTU-engines
95/ 20020(E4)
for MTU-engines
95/ 20021(E4)
for MTU-engines
95/ 20022(E4)
800
800
Speed Exhaust Gas Temp.
[rpm]
[°C]
72.500
75.000
800
800
[mm]
[mm]
Rem arks
[rpm]
[°C]
[mm]
[mm]
ZR 170
Application
[rpm]
[°C]
 155
 155
 155
 158 Al
 170 Al
 176 Al
62.000
60.000
58.000
800
800
800
 155
 155
 165
 165
 175
 155
 170 Ti
 170 Ti
 176 Al
 176 Ti
 176 Al
 176 Al
62.000
62.000
58.000
59.000
54.000
54.000
800
850
800
800
850
700
100
Type
ZR 210
Details of Approval
Application
H igh speed rotating exh aust gas turbochargers.
[mm]
[mm]
 210
 240
 225 Al
 250 Al
for MTU-engines
Rem arks
Cert. N o.
95/ 20023(E4)
[rpm]
[°C]
40.000
35.000
700
700
101
...continued
Type
ZR 175
ZR 195
Details of Approval
Application
on MTU-engines,
series 4000-00/ 01.
H igh speed rotating exhaust gas turbocharger
Mod el
ZR 175
ZR 195
ZR 195
Turb. w heel Com p. w heel
d ia. (m m )
d ia. (m m )
158
176 Alum .
180
197 Alum .
180
197 Titan
Revs./ m in
63.500
55.800
55.800
Rem arks
Cert. N o.
97/ 20059(E5)
Exh. gas
tem p. (°C)
750
750
750
102
Product: Marine D iesel Exhaust Hose and Components (Part 1A)
Alfagomma Industrial SpA,
N ucleo Industriale,
64020 S.Atto (TE),
Italy.
Type
Details of Approval
Marine d iesel exhaust hose:
T-621 AA
Hardwall exhaust hose comprising a black synthetic elastomer
lining and cover, reinforced with high tensile textile cords, and
embedded steel helix wires:
Classification (according to ISO 13363):
Internal diameter (mm):
Max. working pressure (bar):
T-653 AA
F.R.P. w et m arine
exhaust com ponents.
Rem arks
As short joining lengths to
accom m od ate relative
m ovem ent in w ater cooled
m arine d iesel exhaust
system s, in craft up to 24m
length, and in craft greater
than 24m length, subject to
com pliance w ith LR Rule
requirem ents.
Diesel exhaust gas system
com ponents installed in sm all
craft w ith engine sizes up to
2500hp.
Cert. N o.
08/ 00005(E1)
Com plies w ith:
ISO 13363-2004
SAE J 2006-2013
Softwall exhaust hose comprising a black synthetic elastomer lining
and cover, reinforced with high tensile textile cords:
Classification (according to ISO 13363):
CEN TEK IN D USTRIES IN C.,
116 Plantation Oak D rive,
P.O. Box 3028,
Thomasville,
Georgia 31799,
United States of America
(USA).
Type 2, Class A & B
25 to 203
3
Application
Type 1, Class A & B
25 to 203
3
Wet Marine Exhaust Com ponents;
Vernatone m ufflers
Centubular™ m ufflers
Vernalift™
Gas/ w ater separation m ufflers
Gen-Sep™ / Com bo-Sep™
Gen Kleen™
Vernatube™
(Suitable for engines from 5 to 2500 H .P.)
06/ 00077(E1)
See certificate for Cond itions of
Approval
103
Halyard (M & I) Ltd,
6 & 7 Westfield Industrial
Estate,
Horndean,
Hants, PO8 9JX,
Type
Prod uct
Specifications
145, 149, 278, 279 &
332
Licence L93/00012
Details of Approval
Application
Silicone m arine d iesel exhaust hoses, bellow s and shapes,
includ ing flanged versions:
Product Specifications 145 & 149:
Diam eter (m m ):
Working pressure (bar):
<152m m :
>152m m :
Max continuos operating tem perature (°C):
Diesel Exhaust Gas System s
installed in Special service
Craft.
Rem arks
Cert. N o.
04/ 00023(E2)
25 to 705
2
1
180
104
Type
Halyard (M & I) Ltd
...continued
Details of Approval
Application
Rem arks
Cert. N o.
04/ 00023(E2)
Product Specifications 278 & 279:
Diam eter (m m ):
<152m m :
>152m m :
25 to 705
2
1
260
Product Specification 332:
Diam eter (m m ):
25 to 254
1
180
Atlantis
Special Service Craft
Halyard Product Specification Nos. 1, 2, 12 & 164
Water-cooled diesel engine
exhaust systems and low pressure cooling systems
installed in Special Service
Craft.
90/ 00161(E6)
Halyard M & I Ltd,
Whaddon Business Park,
Southampton Road,
Salisbury, SP5 3HF,
H MI
Com posite Marine Exhaust Com ponents
Diesel exhaust gas system s
installed in special service
craft
04/ 00007(E2)
IVG Colbachini SpA,
Via Fossona 132,
35030 Cervarese,
S. Croce,
Padova,
Italy.
ETN A
Water cooled d iesel exhaust
gas system s installed on craft
less than 24m in length, or
pleasure yachts
99/ 00169(E4)
Maxim um w orking pressure (bar):
Bore range, d epend ing on type (m m ):
Continuous operating tem perature (0C):
Max. operating tem perature (0C):
0.2
38 to 958
60 to 70
85
Flexible exhaust gas hose, comprising of an oil resistant liner, outer
cover and filler, with two layers of textile reinforcement and an
integral steel wire helix:
Diam eter (m m ):
Pressure rating (bar):
Tem perature rating (°C):
25 to 305
2
–30 to 100
105
Polimer Kauçuk San. Ve Paz.
A.S.,
Esenyurt Yolu 31 Avcilar,
POB 55 Post Code 34842,
Istanbul,
Turkey.
Type
SAE J 2006 R1 and
R2
Details of Approval
Marine d iesel exhaust hose consisting of black EPDM rubber
tube, w ith or w ithout steel w ire helix and synthetic textile
reinforcem ent, and black EPDM rubber cover, w ith end fittings.
Diam eter (DN ):
Max. w orking pressure (bar):
Tem perature range (°C):
Application
Short joining lengths of
m arine d iesel exhaust hose.
Rem arks
Cert. N o.
02/ 00029(E2)
approval.
13 to 300
4.5
< 120
106
A.S.,
Organize Sanayi Bölgesi
Atatürk Cad.,
6, Sok. N o.3 Çerkezköy,
Tekirdag,
Turkey.
Trident Rubber Inc,
585 Plum Run Road,
Canonsburg,
PA 15317,
(USA).
Type
202V
252V
Details of Approval
Marine diesel exhaust hose consisting of a red smooth silicone
rubber liner, high tensile multi-ply polyester reinforcement, and a
glossy blue silicone rubber cover (Series 252V also includes steel
wire reinforcement):
SAE J 2006
R1 and R2
Series 202V:
Diameter (inch):
Classification: (to ISO 13363):
(to SAE J2006):
1 to 16
Type 1, Class B
R1 (Softwall)
Series 252V:
Diameter (inch):
(to SAE J2006):
¾ to 8
Type 2, Class B
R2 (Hardwall)
Marine Diesel exhaust hose consisting of black EPDM rubber
tube, w ith or w ith or w ithout one steel w ire helix and synthetic
textile reinforcem ent and black EPDM rubber cover , w ith end
fittings.
Diam eter (DN ):
202V
252V
Marine d iesel hose for use in
w et exhaust system s.
Rem arks
Cert. N o.
10/ 00052(E2)
approval
m arine d iesel hose.
approval.
03/ 60002(E2)
Marine d iesel hose for use in
w et exhaust system s.
approval
11/ 60003(E3)
13 to 300
4.5
<120
Marine diesel exhaust hose consisting of a red and blue smooth
silicone rubber liner, high tensile multi-ply polyester reinforcement,
and a glossy blue and red silicone rubber cover (Series 252V also
includes steel wire reinforcement):
Series 202V:
Diameter (inch):
(to SAE J2006):
Application
1 to 16
Type 1, Class B
R1 (Softwall)
107
Type
Details of Approval
Series 252V:
Diameter (inch):
(to SAE J2006):
Application
Rem arks
Cert. N o.
¾ to 8
Type 2, Class B
R2 (Hardwall)
108
Tubigomma D eregibus S.R.L.,
Via Enrico Mattei, 1,
Saccolongo (PD ), 35030,
Italy.
Type
ON D 6012/ 2S
Details of Approval
Flexible exhaust hose com prising of Styrene Butad iene Rubber
cover and lining, enclosing a d ouble steel w ire helix and
reinforced w ith tw o layers of nylon ply:
Bore range (m m ):
Up to 76m m :
Greater than 76m m :
Marine Exhaust
H ose
Tubithor SPA,
Via Caduti per la Patria, 83,
20050 Lesmo,
Milano,
Italy.
SCAMO / SP N AJ
Rem arks
Cert. N o.
gas system s installed in
Special Service Craft.
98/ 00089(E3)
gas system s installed in
Special Service Craft
98/ 00090(E3)
Marine exhaust hose for
96/ 00126(E5)
19 to 305
-40 to 100
10
6
Flexible exhaust hose com prising of Styrene Butad iene Rubber
cover and lining, enclosing plies of synthetic cord steel w ire
helix:
Bore range (m m ):
Up to 76m m :
Greater than 76m m :
Application
19 to 203
-40 to 100
10
6
Marine d iesel exhaust hose m ad e up of a sm ooth black sea w ater
and exhaust resistant rubber tube, high tensile textile w ith
em bed d ed helix w ire reinforcem ent and sm ooth black rubber
cover:
Internal d iam eter (m m ):
To be secured by tw o stainless steel
hose clam ps at each end .
9 to 127
3
-30 to +100
109
Type
SCAMO / SP CAJ
Details of Approval
Marine d iesel exhaust hose, consisting of synthetic N BR black
rubber inner tube, em bed d ed steel w ire helix, high tensile
synthetic cord s reinforcem ent and black CR rubber cover:
Bore range(m m ):
Design pressure (bar):
Design tem perature (°C):
Application
Marine exhaust hose for
Rem arks
Cert. N o.
96/ 00127(E6)
To be secured by tw o stainless steel
hose clam ps at each end .
16 to 305
3
-30 to +100
110
Venair Iberica S.A.,
C/Perpinya 27-29,
08226 Terrasa (Barcelona),
Spain.
Type
VEN A SIL 500
Details of Approval
VEN A SIL 500 Silicone hoses for m arine w et exhaust system s
Style R1 and R3
6 to 508m m straight hose, elbow and convoluted hose
Application
Used in m arine w et exhaust
system s w here the exhaust
gases are m ixed w ith the
d ischarge of cooling w ater
Rem arks
Cert. N o.
12/ 00066
For Other Cond itions, see Certificate.
6 to 35m m :
1 ply of VMQ (Vinyl-Methyl Quality) silicone, thickness 1.3m m
3 plies of polyester fiber coated w ith VMQ silicone, thickness
1.0m m
38 to 150m m :
1 ply of VMQ silicone, thickness 1.3m m
1.0m m
151 to 300m m :
1 ply of VMQ silicone, thickness 2.0m m
1.0m m
301 to 508m m :
- 2 plies of VMQ silicone, thickness 2.0m m
1.0m m
The num ber of corrugations in the convoluted hoses w ill be
m anufactured und er custom er d em and .
Stand ard num ber of corrugations 1, 2, 3, 4, 5 and 6.
The convoluted hoses shall be equipped w ith external steel rings
upon request.
Maxim um Working Pressure:
111
Type
Details of Approval
Inner
d iam eter
(m m )
6
8
10
13
16
18
20
Working
pressure
(bar)
21.3
17.3
14.7
12.0
10.3
9.7
9.0
Inner
d iam eter
(m m )
45
50
51
63
76
90
100
Application
Rem arks
Cert. N o.
Working
pressure
(bar)
5.0
4.7
4.7
4.0
3.3
3.0
2.7
112
Type
22
25
28
32
35
38
40
42
Venair Iberica S.A. ...continued
Vetus N .V.,
Fokkerstraat 571,
3125 BD Schiedam,
N etherlands, The.
Details of Approval
SAE J 2006 R1 and
R2
8.3
7.7
7.0
6.3
6.0
5.7
5.3
5.3
102
110
120
134
152
180
203
254 to 508
WAM Marine Wet
Exhaust Hose
Rem arks
2.4
2.4
2.3
1.9
1.37
1.3
1.17
0.83
reinforcem ent, and black EPDM rubber cover, w ith end fittings.
Diam eter (DN ):
WAM 926 N ew Zealand
Limited,
PO Box 15 656 N ew Lynn,
48-50 Pakiti Road,
Avondale,
Auckland,
N ew Zealand.
Application
Cert. N o.
12/ 00066
02/ 00082(E2)
approval.
13 to 300
4.5
< 120
Flexible exhaust gas hose consisting of EPDM rubber tube, with
polyestyer cord and steel wire helix reinforcements, and corrugated
EPDM cover, without end fittings.
Water cooled diesel exhaust
gas systems installed in small
craft less than 24 m in length or
pleasure yachts
08/ 10061(E3)
Diameters (mm) : 25 to 306
Working Pressure (kPa) : 50
Temperature Rating ( ºC) : +121
SAE J2006 Rev. Oct2003, Style R1
WAM Marine Wet
Exhaust Hose SAEJ2006 Style R2
Hardwall USCG
Flexible exhaust gas hose consisting of EPDM rubber tube, with
polyestyer cord and steel wire helix reinforcements, and hardwall
EPDM cover, without end fittings.
113
WAM 926 New Zealand Limited
...continued
Type
WAM Marine Wet
Exhaust Hose
(Corrugated) NBR
SAE-J2006
Details of Approval
Flexible exhaust gas hose consisting of NBR rubber tube, with
polyestyer cord and steel wire helix reinforcements, and corrugated
NBR cover, without end fittings.
Application
Rem arks
Cert. N o.
08/ 10061(E3)
114
Product: Marine D iesel Exhaust Silencer (Part 1A)
Soundow n Corporation,
16 Broadw ay,
01970 Salem,
Massachusetts,
(USA).
Type
Axial Waterd rop
Range
Waterd rop Silencer
Lift Silencer Range
Soot Sinker
Tow er Silencer
Range
Exhaust Tubing
Details of Approval
Com posite H ose:
Diam eter (Inches): Pressure (psig):
Axial Waterd rop Range
10.5”-48”
5
Waterd rop Silencer
10.5”-32”
5
Lift Silencer Range
8”-21”
5
Soot Sinker
8”-12”
5
Tow er Silencer Range
17”-50”
5
Exhaust Tubing
1.25”-50”
50
Application
Rem arks
Cert. N o.
Marine/ Offshore services and
locations listed in Part 5,
Chapter 12, Section 5, Table
12.5.3 of Ship Rules where an
L3 or 0 is indicated
16/ 60004(E1)
11/ 00001(E1)
Tem perature range -40° to +93° C
Italy.
200,
250,
252
reinforcem ent, and black EPDM rubber cover, w ith end fittings:
Diam eter (DN ):
Max. w 0orking pressure (bar):
Refer to certicate for cond itions of
approval.
13 to 300
4.5
< 120
115
Subject: Engine Start Systems
Product: Starters (Part 1A)
Type
Gali Internacional SA,
C/ Jose Tura N o.5,
08181 Sentmenat,
Barcelona,
Spain.
Air starter for d iesel
and gas engines.
Ingersoll-Rand,
1725 US Highw ay 1, N orth,
Southern Pines,
N orth Carolina, 28387,
(USA).
Air Starters
Details of Approval
Air starter types: A17, A27, A47, A48, S30, S38.
Max air pressure: 3 MPa (30 bar) (4MPa for A27 unit)
See m anufacturers d ata sheets for starting torque and air
consum ption.
Starting for d iesel and gas
engines.
Air starting d evices for m arine d iesel engines in accord ance w ith
Ingersoll-Rand specifications
Air starting d evices for m arine
d iesel engines
Air starter
150 T series
ST 400 series
ST 500 series
ST 600 series
ST 700 series
ST 900 series
ST 1000 series
B006 series
T480 series
SS100
Relay Valve
RR152-F30
Application
Max Pressure
(psi)
Max Pow er
(hp)
150
150
150
150
30
26
44
66
T150
ST400
ST500
ST600
ST700
ST900
ST 1000
B006
T480
SS100
150
150
150
90
90
150
Rem arks
Cert. N o.
14/ 00030
Other Cond itions.
01/ 60046(E3)
66
66
70
.610
3.800
13.8
Inlet pressure 435 psi
Outlet pressure 145 psi
Maixum flow 1800 scfm
116
Subject: Filtration
Product: D uplex In-Line Filter (Part 1A)
Alfa Laval Moatti SAS,
La Clef Saint Pierre,
10 Rue du Maréchal de Lattre,
78997 Elancourt,
France.
Type
Details of Approval
Protector
150/ 152/ 160/ 180/
240/ 280/ 350 Series
Lubricating oil filters w ith auto. or m anual cleaning m echanism :
Protector
140/ 150/ 152/ 240
Series
Fuel oil filters w ith auto, auto/ m anual or m anual cleaning
m echanism :
Max. tem perature (°C):
Hydac Filtertechnik GmbH,
Industriegebiet,
66280 Sulzbach/Saar,
Germany.
Application
RFLD Series
Duplex in-line filter with change- over valve.
RFLD 111 – 40 bar
RFLD 241 – 40 bar
RFLD 261 – 40 bar
12
100
Rem arks
Cert. N o.
Marine, offshore and
ind ustrial use for lubricating
oil filtration
93/ 00077(E8)
ind ustrial use for fuel oil
filtration
93/ 00078(E6)
Filtration of fluids in marine,
offshore and industrial
hydraulic and lubricating oil
applications
86/ 20114(E5)
For fuel-, lubricating- and
hydraulic oil systems in marine
and offshore fields, classed or
Lloyd’s Register.
13/ 20006
15
160
RFLD 331 – 33 bar
RFLD 501 – 33 bar
RFLD 661 – 35 bar
RFLD 851 – 35 bar
RFLD 951 – 34 bar
RFLD 1301 - 34 bar
Filtration Range : 500 μm to 3 μm nominal
and absolute
Design Temperature: -10°C to 100°C
MAHLE Filtersysteme GmbH,
Industirla Filtration,
Schleifbachw eg 45,
Ohringen, 74613,
Germany.
Pi 241, Sizes NG50
and NG80
Duplex in-line filter w ith change-over valve.
Design pressure: 40 bar
Tem perature :
- 10 to + 120°C
117
Subject: Filtration
Type
Series:
Pi 210, Pi 2100 and
KE 2698
Details of Approval
Inline duplex filter
For fuel-, lubricating- and
hydraulic oil systems in marine
and offshore fields, classed or
Lloyd’s Register.
Ratings:
Types:
Pi 2105, Pi 2108, Pi 2111,
Pi 21004, Pi 21006, Pi 21010
Application
Rem arks
Cert. N o.
14/ 20021
Design Pressure:
63 bar
Other Conditions:
118
Subject: Filtration
Type
Details of Approval
Pi 2115, Pi 2130, Pi 2145, Pi 2160,
Pi 21016, Pi 21025, Pi 21040
32 bar
KE 2698
30 bar
MAHLE Filtersysteme GmbH
...continued
Application
Rem arks
are to be sought.
Cert. N o.
14/ 20021
Design Temperature: - 30 to +120°C
Mann+Hummel GmbH,
Brunckstraße 15,
67346 Speyer,
Germany.
66 730 82 100
66 730 82 110
Oil fu el filter com prising of a filter head w ith tw o connection
flanges and m ounting points, valves for sw itching and taking
aw ay the fuel pressure, as w ell as tw o spin -on filters.
R A TIN GS:
M.A.W.P.: 8 bar
Temp. Range: -25 °C to 60 °C
8B
Parker Hannifin
Manufacturing Finland Oy,
Salmentie 260,
FI-31700 Urjala As,
Finland.
DFBO-10 / DFBO-14
Duplex fuel filter
Design pressure:
Design tem perature (Min/ Max) :
Filtering elem ent size:
Material :
Volum e:
7 bar
0 °C – 60°C
1 - 25µm
EN -GJS-40015/ S355J0/ CR03 for all
pressurized com ponents
As oil fuel filters for diesel
engines on ships and offshore
Lloyd`s Register.
06/ 20015(E2)
For shipboard lubricating and
fuel oil systems
14/ 00014
DFBO-10: 16 litres;
DFBO-14: 20 litres
119
Subject: Filtration
Product: Strainers (Part 1A)
Type
Details of Approval
Hellan Strainer Company,
3249 East 80th Street,
Cleveland, Ohio 44104,
(USA).
AH, DH, QH, HH,
AA, DA, QA, HA,
311 & 611, WSH
Fluid Strainers
Sinpro (D ezhou) Industries Co.
Ltd,
N o.1 Industrial Pakr Road,
N ingjin Tow n 253400,
D ezhou City,
Shandong Province,
Strainer
“AFA”Y-strainer
N om inal Size (m m ):DN 15-DN 400
Maxim um Working Pressure (Bar):
10, 16
Materials for Bod y:
Grey Cast Iron EN -GJL-250 (BS EN 1561) or equal
Spheroid al Graphite Cast Iron EN -GJS-400 (BS EN 1563) or equal
Application
Rem arks
Fresh & Salt water Systems
Including fire main.
Fuel Oil Systems
Lubricating Oil Systems
Marine, Offshore pipeline on board
Cert. N o.
01/ 60001(E2)
Refer to Certificate N o. 01/ 60001(E2)
and associated d esign appraisal
d ocum ent 01/ 60001(E2) for size,
rating and guid ance for m arine,
offshore and ind ustrial applications.
14/ 80040
Materials for filter net: stainless steel 304
120
Subject: Fire & Blast
Product: Blast Resisting D oors, Panels, Barriers (Part 1A)
Van D am B.V.,
Markw eg-zuid 1c,
4794 SN Heijningen,
N etherlands, The.
Type
Generation III-M
Generation III-N
Details of Approval
Generation III-M: H -120:1.0 bar g, 30m s isosceles pulse
Generation III-N : H -120:0.7 bar g, 20m s isosceles pulse
Application
Rem arks
For Offshore services
Cert. N o.
10/ 00053
121
Product: Fire Fighting (Part 1A)
N OXERIOR SRL,
Via Giordania 48,
58100 Grosseto,
Italy.
Type
N itrogen Mem brane
Separators
Details of Approval
Marine N itrogen Mem brane Separators
N ITROMEM types N M-09/ N M-18/ N M-27/ N M-36.
N 2 capacity/ O 2 resid ual content from 5N m 3/ hr at 0.5% to
175N m 3/ hr at 5%.
The perform ance of the separators is d epend ent on the air
com pressor and quality of air supplied to the unit.
See m anufacturer’s d ata sheets for d etails.
Application
For installation in ships
m achinery spaces in acc. w ith
the LR Rules and I.M.O. FSS
Cod e.
Rem arks
Cert. N o.
15/ 00098
and Design Appraisal Docum ent for
Approval Cond itions.
This approval d oes not includ e the
upstream com pressors and
equipm ent or d ow nstream control
and safety d evices.
Com plies w ith:
LR Rules 2014.
SOLAS 74 as am end ed .
I.M.O. Res.A567(14).
MSC98(37)-(FSS Cod e)15,
M.S.C. Circ. 353,485,731,1120.
N itrogen Mem brane
Separators
Marine N itrogen Mem brane Separators
N ITROMEM types N M-45/ N M-54/ N M-63/ N M-72.
N 2 capacity/ O 2 resid ual content from 24.8 N m 3/ hr at 0.5% to
350N m 3/ hr at 5%.
The perform ance of the separators is d epend ent on the air
com pressor and quality of air supplied to the unit.
See m anufacturer’s d ata sheets for d etails.
For installation in ships
m achinery spaces in acc. w ith
the LR Rules and I.M.O. FSS
cod e.
15/ 00099
This approval d oes not includ e the
upstream com pressors and
equipm ent or d ow nstream control
and safety d evices.
Com plies w ith:
LR Rules 2014.
SOLAS 74 as am end ed .
I.M.O. Res.A567(14).
MSC98(37)-(FSS cod e)15,
M.S.C. Circ. 353,485,731,1120.
122
Product: Fire Fighting (Part 1A)
Scotchmist Ltd,
PO Box 269,
Oxted, RH8 8D S,
Type
ST 250
ST 350
ST 420
ST 650
Details of Approval
Turbo-fog, w ater m ist fire suppression nozzles:
Application
Suppression of fires in non m arine applications.
Rem arks
Cert. N o.
05/ 00102(E1)
Refer to certificate for d etails of nozzle angles, pressures,
operating heights etc.
123
Subject: Flow Metering Equipment
Product: Flow Sensors (Part 1A)
Aquametro AG,
Ringstrasse 75,
4106 Therw il,
Sw itzerland.
Bopp & Reuther Messtechnik
GmbH,
Am N euen Rheinhafen 4,
67346 Speyer,
Germany.
Type
CONTOIL® VZO,
VZOA, VZF, VZFA
and DOMINO ARD
OI 5 to OI 400 and
OaP 5 to
OaP 3200
Details of Approval
Application
Flow meters with rotary piston made of anodized aluminium,
graphite or hard rubber; with roller counter or electronic display
with measurement transducers with relays and analogue outputs.
ENV1,
ENV2,
ENV3,
ENV4
(2002)
Ratings:
Nom. Dia. (mm) :
Nom. Press. (bar):
Electric enclosure:
Types CONTOIL® VZO(A)
and VZF(A) in fuel oil,
lubrication oil, hydraulic oil
systems and type DOMINO
ARD in water systems on ships
Register.
DN 15, 20, 25, 40 and 50
PN 16 and 25
IP66
Flow meters with oval wheels, made of cast iron, brass, carbon steel
or stainless steel.
Ratings:
Nom. Dia. (mm): DN 25, 50, 65, 80, 100, 150, 250 and 300
Nom. Press. (bar):
PN 25, 40 and 100
Marine, offshore and industrial
use in flammable liquid and
other systems compatible with
the materials of construction
and classed or intended for
Register
Rem arks
Cert. N o.
05/ 20053(E2)
The electrical parts of the measuring
unit are not covered by this Certificate.
07/ 20012(E1)
Restrictions:
Grey cast iron is not to be used
in flammable oil systems where
the design pressure exceeds 7
bar or the design operating
temperature is greater than
60°C.
124
Endress+Hauser Japan Co Ltd,
5-70-3 N isshin-cho,
Fuchu-shi,
Tokyo, 188-0036,
Japan.
Type
Mass Flow Meter
Type: Prom as
80/ 83F 80/ 40E Series
Details of Approval
Pow er Supply: 85-230V a.c.
Output signal: 4-20m Ad .c.
Application
EN V2
EMC Test in “General Pow er
Distribution Zones”
(2002)
Rem arks
Cert. N o.
05/ 10026(E2)
See Manufacturer’s Technical
Inform ation :
TI 055D/ 06/ en/ 10.00 50098284,
TI 053D/ 06/ en/ 12.04 50098280,
TI 061D/ 06/ en/ 50102807
125
Endress+Hauser Japan Co Ltd
...continued
Type
Details of Approval
Com prising:80F – 8            
83F 15 1 2 3 4 5 6 7 8 9 10
80E 25
40E 40
50
Application
Rem arks
Cert. N o.
05/ 10026(E2)
Type;
80F: Sensor type F
83F: Sensor type F & Touch control
80E: Sensor type E
40E: Sensor type E
Meter Size;
8 : 8A
15: 15A
25: 25A
40: 40A
50: 50A
Suffixes are d efined by alphabets or num erical num bers
ind icating :
1. Material
2. Process connection
3. Test/ Treatm ent
4. Calibration
5. Certificate
6. Enclosure rating/ Com pact & Rem ote
7. Electrical cond uit
8. Ind icator/ Pow er supply
9. Softw are
10. Input/ Output
126
Kittiw ake D evelopments Ltd,
3-6 Thorgate Road,
Littlehampton,
West Sussex, BN 17 7LU,
Type
FG-K1-122-KW
FG-K1-123-KW
FG-K1-124-KW
FG-K1-125-KW
FG-K1-126-KW
FG-K1-127-KW
FG-K1-128-KW
FG-K1-129-KW
FG-K1-130-KW
Details of Approval
Portable bunker fuel sam pling flange and assem bly:
Line size (inch):
2 to 14
Application
Marine offshore and ind ustrial
applications to provid e
sam ples of fuel oil d uring
bunkering
Rem arks
Cert. N o.
05/ 00068(E2)
127
Kittiw ake D evelopments Ltd
...continued
Type
FG-K1-131-KW
FG-K1-132-KW
FG-K1-133-KW
Details of Approval
Application
Rem arks
Cert. N o.
05/ 00068(E2)
128
Subject: Heat Transfer
Product: Heat Exchangers (Part 1A)
HS-Cooler GmbH Wittenburg,
Sudring 2,
19243 Wittenburg,
Germany.
Type
KS 12, KS 20, KS 25
Details of Approval
Pressure Stage:
Shell Sid e
Shanghai D ongrun Heat
Exchange,
N o. 75 Rongfa Road,
Jinshan D istrict,
Shanghai, 201518,
DK series
Taiw an SRP Heat Exchanger
Inc,
N o.7 Floor 9-3, D unhua South
Road, Section 1,
Taipei City,
Taiw an.
GC12, GC30
GL13, GC16
GC26, GC26T
GC51, GC51T
GC60, GC60T
Tube Sid e
x
130°C/ 16 bar
130°C/ 10 bar
y
100°C/ 30 bar
100°C/ 25 bar
z
100°C/ 25 bar
80°C/ 25 bar
Air cooler
Application
Rem arks
Cert. N o.
As Heat Exchangers for oil,
seawater, freshwater and
refrigerants in ships, offshore
installations or ind ustrial
services classed or intended for
Register.
00/ 20008(E3)
Air Cooler for marine
generator and motor
14/ 80030
As heat exchanger for sea
w ater, fresh w ater,
Lubricating Oil, Brine
14/ 80036
Heat Exchange Area(m 2):
DK10
10
DK50
50
DK65
65
DK80
80
DK100 100
DK125 125
DK150 150
DK200 200
DK250 250
DK300 300
DK350 350
DK400 400
DK450 450
DK500 500
Max. Allowance Water Side Pressure (Bar): 6
Max. Water Inlet Temp. (˚C): 32
Max. Air Outlet Temp (˚C): 40
Plate H eat Exchanger
Design Pressure (Bar): 6,10
Design Tem p. (˚C):
110
Plate m aterial:
ASTM B265: TI, TI-Pd
ASTM A240: 304, 316, 316L,254SMo,
654SMo
129
Product: Heat Exchangers (Part 1A)
Taiw an SRP Heat Exchanger
Inc ...continued
Type
GX26, GX42
GX51M GX64
GX91, GX118
GX60, GX100
GX140, GX180
GX85, GL85
GX145, GL145
GX205, GL205
Details of Approval
Plate thickness (m m ): 0.5, 0.6
Seal m aterials:
N BR/ H N BR, EPDM, VITON / FPM
Cover Plate m aterials: Q235B, SS400
Application
Rem arks
Cert. N o.
14/ 80036
130
Product: Water Heater (Part 1A)
Pyro AS,
Gamlem,,
N O-6280,,
Sovik,,
N orw ay.
Type
Series II, III, IV, V &
VI
Details of Approval
Application
Oil Fired H ot Water Boiler
Purpose: Water H eating
Mod el
E1109
E1110
E1112
E1114
E1116
E1118
Capacity
kW
kcal/ h (x 103)
23
20
27
23
34
30
58
50
75
65
105
90
IV
E1120
E1122
E1124
E1127
E1129
123
151
174
221
291
106
130
150
190
250
V
E1130
E1131
E1133
E1134
406
581
872
1162
350
500
750
1000
VI
E1135
E1137
E1138
E1139
E1140
1453
1744
2500
3000
3500
1250
1500
2150
2580
3010
Series
II
III
Rem arks
approval.
Cert. N o.
09/ 00006(E1)
131
Subject: Hose Assemblies
Product: Flexible Hoses (Part 1A)
Type
Aerosun Corporation,
3931 Chuansha Road, Pudong
N ew D istrict,
Shanghai,
A-0004525 &
A-0004526
Alfagomma SpA,
Via Torri Bianche, 1,
20059 Vimercate (MI),
Italy.
122 T & 122G;
222 T & 222 G;
790L & 790G;
713L & 713G;
3SPT & 3SPG;
241T & 241G
Details of Approval
Application
Metallic flexible hoses assem blies.
H ose internal d iam eter (m m ): 8
Working tem perature range (°C): 0 to +35
Maxim um w orking pressure (MPa): 14.0
H ose flexibility: Type 3 accord ing to ISO 10380: 2003
H igh pressure, fire resistant flexible hoses assem blies w ith an
inner tube and cover of synthetic rubber, reinforced w ith braid ed
and spiral high tensile steel:
Daim eter range (m m ):
Max. w orking pressure range (bar):
Rem arks
Cert. N o.
use for sprinkler systems and
other similar systems.
13/ 80008
flexible hose to accom m od ate
relative m ovem ent in m arine
and offshore system s:
07/ 00065(E2)
1. Transfer of potable w ater,
barytes, d rilling w ater, d rilling
m ud s, cem ent, d iesel oil and
sea w ater on offshore oil and
gas prod uction platform s.
00/ 00073(E3)
4.8 to 50.8
500 to 40
-40 to 100
Refer to Alfagomma/ Dunlop Hiflex data sheets for actual
maximum working pressure for specific hose diameters
Angus Flexible Pipelines
D ivision,
Thame Park Road,
Thame,
Oxfordshire, OX9 3RT,
Offshore 850 Soft
Wall Multipurpose
H ose
Multipurpose hose consisting of a circular w oven textile
reinforcem ent m ad e from high m od ulus synthetic yarns totally
encapsulated in a tough w ater and chem ically resistant
elastom er, w hich provid es an integral cover and lining.
Diameter
(mm)
76
102
127
152
Max. Working
Pressure (bar)
15
15
15
15
End Load
(tonnes)
SLBP
(bar)
7
11
15
18
58
58
58
58
Max.
Length
(metres)
200
200
200
200
2.
Transfer of potable w ater,
barytes, d rilling w ater,
d rilling m ud s, cem ent,
d iesel oil and sea w ater
from supply boats to oil
prod uction platform s and
exploration rigs.
132
Type
Offshore 850 Soft
Wall multipurpose
hose with attached
end couplings
Details of Approval
Application
Multipurpose hose consisting of a circular woven textile
reinforcement made from high modulus synthetic yarns totally
encapsulated in a tough water and chemically resistant elastomer,
which provides and integral cover and lining.
Diameter
(mm)
Max. Working
Pressure (bar)
End Load
(tonnes)
SLBP
(bar)
1. Transfer of potable water,
barytes, drilling water, drilling
muds, cement, diesel oil and
sea water on offshore oil and
gas
production
platforms.
Rem arks
Cert. N o.
00/ 00074(E3)
Max.
Length
133
Type
Angus Flexible Pipelines
D ivision ...continued
Details of Approval
76
102
127
152
15
15
15
15
7
11
15
18
Application
58
58
58
58
(metres)
200
200
200
200
2.
Rem arks
Transfer of potable water,
barytes, drilling water,
drilling muds, cement,
diesel oil and sea water
from supply boats to oil
production platforms and
exploration rigs.
Cert. N o.
00/ 00074(E3)
Bilba Holdings Pty Ltd,
Trading as Elsam Plastics,
36 Gillard Crescent,
Katherine,
N T 0850,
Australia.
Polyethylene (PE)
pipes PE100
Polyethylene pipes fitted in LR Classed vessels in accord ance
w ith the m anufacturer’s instructions and specifications
N on-essential m arine w ater
system s.
Fresh w ater and internal
sanitary d rains.
15/ 00084
Bridgestone Corporation,
Bridgestone Flow tech
Corporation,
Saitama,
1-3-1, Minami-Shinozaki,,
Kazo-city,,
Saitama-ken, 347-0017,
Japan.
“PASCALART”(PA)
series &
“EPOQU” (EQ) series
Flexible rubber hose assemblies
Marine use on ships
installations classed with
Lloyd’s Register, as short
length in piping system of
hydraulic oil
11/ 10030(E1)
Other conditions
1) The use of flexible hoses
should be restricted to short
joining length only between
various items of machinery and
the permanent piping systems
where some degree of
flexibility is essential.
Bridgestone Corporation, Seki Plant
20, Shin-Sakoma, Seki-city, Gifu-ken,
501-3923, Japan
Bridgestone Corporation, Kumamoto
Plant
600, Kawasaki, Tamana-city,
Kumamoto-ken ,
865-0007, Japan
PA series
Sizes (Insid e Dia)
PA07, PA10, PA14, PA21 & PA28: 6.3 mm ~ 50.8 mm
PA17: 6.3 mm ~ 25.4 mm
Maxim um w orking pressure: 7.0 MPa ~ 27.5 MPa
Service tem perature
H yd raulic oil: -40˚C ~ +100˚C
Water: 0˚C ~ +50˚C
134
Type
Details of Approval
EQ series
Sizes (Insid e Dia)
EQ17, EQ25 & EQ28: 12.7 mm ~ 38.1 mm
EQ21 & EQ31: 12.7 mm ~ 50.8 mm
Service tem perature : -40˚C ~ +120˚C
Application
Rem arks
Cert. N o.
2) The flexible hoses should
be fitted in readily visible
positions.
3)
Hose assemblies
with couplings made of carbon
steel are not to be used at
temperatures below -10°C
unless the material is
normalized.
135
Caterpillar Fluid Systems srl,
Via Gobetti 2/A,
20063 Cernusco sul N aviglio,
Milano,
Italy.
Type
H yd raulic hose.
H yd raulic hose.
Details of Approval
Application
1SN EN 853/ SAE100R1AT,
2SN EN 853/ SAE100R2AT,
1SCEN 857,
2SCEN 857/ SAE100R16,
2SCEN 857/ SAE100R16H igh Pressure,
2SCEN 857PLUS MSH A 120d eg.C.
R17SAE100R17
One piece Anchor series 1. end fittings.
Fire tested hoses of oil resistant N BR rubber w ith a w eather and
oil resistant cover reinforced w ith 1or 2 layers of steel w ire braid .
Flexible hoses for high pressure
hydraulic systems using water
glycol and water/ oil emulsion
petroleum based fluids, fuel oil,
lubrication oil, compressed air
and water.
4SP EN 856 MSH A, 4SH EN 856 PLUS MSH A, R12 EN 856/ SAE
100R12 MSH A
R13 EN 856/ SAE 100R13 MSH A, R15 SAE100 R15 MSH A.
All hoses w ith tw o piece fitting Anchor series 2 or 3.
and water.
and water where hoses are not
required to be of fire resistant
type.
Fire tested hoses of oil resistant N BR rubber w ith a w eather and
oil resistant cover reinforced w ith 4 or 6 layers of steel w ire
spirals.
H yd raulic hose.
R4 SAE100R4 PLUS MSH A
With one piece fitting type Anchor.
Flexible hoses of oil resistant N BR rubber w ith a w eather and oil
resistant cover reinforced w ith 2 layers of textile braid .
Rem arks
Cert. N o.
16/ 00022
See certificate for cond itions for
m arine applications
For d etails of sizes and press/ tem p.
ratings see certificate no. 16/ 00022
16/ 00023
For d etails of sizes and press/ tem p.
ratings see certificate no. 16/ 00023
16/ 00024
For d etails of sizes and
pressure/ tem p. ratings see certificate
no. 16/ 00024
136
Caterpillar Inc.,
3701 South Street,
Lafayette, IN , 47905,
(USA).
Type
Details of Approval
Application
N on-m etallic flexible hoses assem blies w ith either one or tw o
w ire braid reinforcem ents, w ith end fittings
1E0716
Single w ire braid hose:
(inch):
Max. w orking pressure (kPa):
Service tem perature (°C):
6.4 to 50.8
0.25 to 2.0
2,600 to 19,000
-40 to +135
Rem arks
Cert. N o.
11/ 00061(E2)
Fuel oil and lubricating oil on
m arine d iesel engines; and
steering gear applications
137
Caterpillar Inc. ...continued
Type
1E0294
Double w ire braid hose:
(inch):
Max. w orking pressure (kPa):
Service tem p erature (°C):
Cobalt Blue Ltd,
Filonos 98B,
18536 Piraeus,
Greece.
CO2 flexible hoses.
Contitech Rubber Industrial
Kft.,
Budapesti út 10,
H-6723 Szeged,
Hungary.
6” Riser Tensioner
Hose
CON TITECH TECHN OCHEMIE GmbH,
D igitalstr. 4-6,
15366 Hoppergaten,
Germany.
Details of Approval
2 SN 2433
6.4 to 12.7
0.25 to 0.5
24,100 to 34,500
-40 to +100
Application
Rem arks
Fuel oil and lubricating oil on
m arine d iesel engines
Cert. N o.
11/ 00061(E2)
Alfagom a flexible hose types 2SN w ith no skive straight and 90
d egree end fittings.
Sizes ¼ - ¾ inch.
For use as connection betw een
valves and m anifold s on high
pressure CO2 system s
Expires: 6 May 2018
Fire resistant riser tensioner hose assembly with a HNBR rubber
liner, rubberised textile, steel and glass reinforcement, with a CR
rubber compound cover:
For use in offshore
installations provid ed they are
installed in accord ance w ith
the m anufacturer’s
instructions and
recom m end ations
11/ 00013
To be used as short joining
lengths to accommodate
relative movement between
items for hydraulic fluids,
water and watery fluids as per
DIN EN 853.
03/ 20003(E2)
Design Pressure (bar):
(psi):
207
3000
Design Temperature (°C):
Water Glycol Mix
Houghto-safe 273 CTF fluid:
Hydraulic Oil:
Hose Class:
Design Life (years):
– 30 to +70
– 30 to +70
– 30 to +90
Static
20
Flame resistant flexible hose assembly, consisting of an inner synth.
rubber tube, two wire braids, an outer synth. rubber tube and end
fittings
DN, mm
: 5 6 8 10 12 16 19 25 31 38 51
MAWP, bar : 415 400 350 330 275 250 215 165 125 90 80
Temp. range in accordance with DIN EN 853
13/ 00036
use.
138
Type
1 SN 2432
Details of Approval
Application
Flame resistant flexible hose assembly, consisting of an inner synth.
rubber tube, single wire braid, an outer synth. rubber tube and end
fittings
To be used as short joining
lengths to accommodate
items for hydraulic fluids,
water and watery fluids as per
DIN EN 853.
DN, mm
: 5 6 8 10 12 16 19 25 31 38 51
MAWP, bar : 250 225 215 180 160 130 105 88 63 50 40
Temp. range in accordance with DIN EN 853
Rem arks
Cert. N o.
03/ 20005(E2)
139
Type
D antec Ltd,
Tarran Way,
Moreton,
Wirral,
Merseyside, CH46 4TL,
Danchem PA SS 100
H ose
D iesse Rubber Hoses SpA,
Via Provinciale, 8,
24040 Filago (BG),
Italy.
DS 12;
DS 13;
DS 15;
DS-4SH ;
DS-4SP;
DS1-T.1SN ;
DS2-T.2SN ;
DS1-SC
DS2-SC
D unlop Oil & Marine Limited,
Moody Lane,
Pyew ipe,
Grimsby,
N .E. Lincolnshire, D N 31 2SY,
DEEPFLO
Details of Approval
Application
Rem arks
Cert. N o.
Com posite Cryogenic Transfer H ose
Working pressure 20 bar.
Tem perature range -50 to +45° C.
25m m to 250m m bore.
Marine and offshore non
floating ship to ship and ship
to shore transfer hose.
Fire safe flexible hoses m ad e up of synthetic rubber reinforced
w ith one or tw o high tensile steel braid s or four or six spirals,
w ith end fittings:
ind ustrial use, includ ing the
follow ing m arine uses:
15/ 00051
05/ 00043(E4)
DS12
N om inal
Diam eter (m m )
10 to 38
Working
Pressure (bar)
276 to 172
DS13
DS15
DS-4SH
DS-4SP
DS1-T.1SN
DS2-T.2SN
DS1-SC
DS2-SC
19 to 51
10 to 38
19 to 51
6 to 51
6 to 51
6 to 51
6 to 25
6 to 25
345
420
450 to 250
500 to 165
225 to 40
400 to 80
275 to 100
420 to 185
Fully bond ed flexible hose, reinforced w ith either Rayon or
H ybrid
textiles and at least one layer of helically w ound steel w ire, w ith
the
carcass chem ically bond ed and m echanically locked onto a steel
fitting:
14/ 00102
cond itions.
Steering gear,
Lube and fuel oil,
Sea w ater,
Fresh w ater,
Sanitary
Subsea m id -w ater oil transfer
and export hose for d eep w ater locations com plying
w ith:

API 17K, 2nd Ed ition

API RP 17B, 5th Ed ition
N ot su itable for sour service.
140
Type
Details of Approval
H oses sizes (ID) (inch):
Length (m ):
End fittings:
Application
Rem arks
Cert. N o.
4 to 30
12.2
50
–15 to +82
DEEPFLO hose end fitting, GTS5129
DEEPFLO forged end fitting, GTS5130
141
Gates Corporation,
Customer Solution Center,
330 Inverness D rive South,
Englew ood,
Colorado, 80112,
(USA).
Gutteling B.V.,
Pelsertstraat 9,
Rotterdam,
3044 CH,
N etherlands, The.
Type
Flam e resistant
hyd raulic hose
assem blies.
Details of Approval
Application
G1, G2, M3K, M4K, M5K, M6K, EFG3K, EFG4K, EFG5K, EFG6K,
MegaFlex CM2T, M3K-MTF, MegaFlex M2T.
See m anufacturers d ata sheets for w orking tem peratures and
pressures.
Marine, Offshore and
Ind ustrial use as short joining
lengths of flexible hose.
See m anufacturers d ata shhets
for particular applications.
Rem arks
Cert. N o.
01/ 00003(E5)
H oses and end fittings are prod uced
and / or assem bled in the plants listed
in the Type Approval Certificate no.
01/ 00003(E5)
Kill and choke hoses
Gates Black Gold - Choke and Kill hoses 21/ 2”, 3” and 31/ 2”
MAWP 10,000 psi and Test Pressure 15,000 psi.
Offshore Installations.
Multi - Chem Red
Multi – Oil Blue
Multi – Chem Green
Multi – Chem Black
Multi–Vapor Yellow
Multi – LPG White
Multi – LN G White
Com posite hoses
Oil, Chem ical, LPG and LN G
system s.
Bore diameter (mm)
Multi - Chem Red
Multi – Oil Blue
Multi – Vapor Yellow
Multi – LPG White
28 to 300
28 to 300
28 to 300
28 to 300
50 to 300
28 to 250
28 to 300
08/ 60004(E1)
07/ 30024(E1)
See Design Appraisal Docum ent
RDS/ 12.T.1290313, Issue N o.1,
d ated 12 N ovem ber 2012
Max. Working pressure (bar)
Multi - Chem Red
7/ 10.5/ 14
Multi – Oil Blue
7/ 10.5/ 14
7/ 10.5/ 14
7/ 10.5/ 14
7
Multi – LPG White
10.5/ 14/ 21
10.5
142
Type
Details of Approval
Temperature range (0C)
Multi - Chem Red
Multi – Oil Blue
Multi – LPG White
Application
Rem arks
Cert. N o.
-20 to +100
-20 to +100
-20 to +100
-20 to +100
-20 to +100
-50 to +50
-196 to +50
143
Type
Haci Ayvaz Endustri
Mamulleri San. Ve. Tic. A.S.,
Ataturk Sanayi Sitesi,
Mustafa Inan Caddesi N o, 36,
Hadimkoy,
34555 Istanbul,
Turkey.
Flexible Metal H ose
Hampshire Hose Services Ltd,
1 The Cross House Centre,
Cross House Road,
Southampton, SO14 5GZ,
GOLDEN SPIR/ 4SH ;
GOLDEN SPIR/ 4SP;
TRACTOR/ 1K,
TRACTOR/ 1T;
TRACTOR/ 2K;
TRACTOR/ 2T
Details of Approval
Braid ed corrugated m etal flexible hose w ith end fittings:
Material: H ose:
Braid :
End fittings:
316L statinless steel
304 stainless steel
Carbon steel or stainless steel
N om inal pressure (PN ) (bar): 60 to 10
- 20 to + 550
10 to 100
Fire safe flexible hose of non -m etallic m aterial w ith perm anently
fitted couplings:
Goldenspir/4SH:
19 to 51
420 to 250
Goldenspir/4SP:
6 to 25
485 to 320
Tractor/1K:
6 to 76
225 to 35
Tractor/1T:
6 to 76
400 to 45
Application
Rem arks
ind ustrial piping system s, as
short joining lengths to
m ovem ent betw een item s of
m achinery connected to
perm anent piping system s.
Flexible hoses for hyd raulic
system s using m ineral oils,
glycols and aqueous em ulsion
oils.
Cert. N o.
13/ 00024
approval
06/ 00027(E1)
144
Type
Details of Approval
Tractor/2K:
5 to 60
250 to 50
Tractor/2T:
5 to 60
415 to 90
Application
Rem arks
Cert. N o.
145
Hampshire Hose Services Ltd
...continued
Type
122 T & 122G;
222 T & 222 G;
790L & 790G;
713L & 713G;
3SPT & 3SPG;
241T & 241G
Application
H igh pressure, fire resistant flexible hoses assem blies w ith an
inner tube and cover of synthetic rubber, reinforced w ith braid ed
and spiral high tensile steel:
relative m ovem ent in m arine
and offshore system s:
12/ 00017(E1)
glycols and aqueous em ulsion
oils accord ing API 16D for
static pressure services.
14/ 20033
Marine, industrial, hyd raulic
and offshore piping systems, as
accommodate relative
movement between items of
machinery connected to
permanent piping systems
10/ 00062(E2)
Daim eter range (m m ):
Max. w orking pressure range (bar):
Rem arks
Cert. N o.
Details of Approval
4.8 to 50.8
500 to 40
-40 to 100
Refer to Alfagomma/ Dunlop Hiflex data sheets for actual
maximum working pressure for specific hose diameters
Hydrasun Ltd,
Gatew ay Business Park,
Moss Road,
Aberdeen, AB12 3GQ,
FIREMASTER 16D
IMM Hydraulics S.p.A.,
Zona Industriale C. de Saletti,
66041 Atessa (CH),
Italy.
Kaizen 2SN
H ypress 2SN
H ypress 2SN Mining
Fire rated hyd raulic hoses w ith perm anently attached couplings:
N om inal bore (inches):
Service tem perature range (°C):
Fire rating:
¼ to 2
500 to 350
-40 to +121
Flam e tem perature
1100°C for 5 m inutes
Fire tested flexible hose assembly consisting of an inner tube of
nitrile butad iene (N BR) oil resistant synthetic rubber, tw o high
tensile steel w ire braid reinforcem ents, and an outer cover of
abrasion and w eather resistant synthetic rubber:
Kaizen 2SN :
5 to 51
420 to 90
Hypress 2SN :
5 to 51
415 to 80
146
Type
Details of Approval
Hypress 2SN Mining:
Application
Rem arks
Cert. N o.
6 to 51
400 to 90
147
IMM Hydraulics S.p.A.
...continued
IVG Colbachini SpA,
Via Fossona 132,
35030 Cervarese,
S. Croce,
Padova,
Italy.
Type
H ipac 2SC
H ypress 2SC
H ypress 2SC Mining
Am alfi
Details of Approval
nitrile butad iene (N BR) oil resistant synthetic rubber, tw o high
tensile steel w ire braid reinforcem ents, and an outer cover of
abrasion and w eather resistant synthetic rubber:
Hipac 2SC:
6 to 31
430 to 160
Hypress 2SC:
6 to 32
400 to 125
Hypress 2SC Mining:
6 to 32
400 to 140
Flexible exhaust hose
Minim um burst pressure – 2.5 bar
Tem perature:
m axim um 100ºC
Sizes internal d iam eter: Am alfi Cord
Am alfi LL
Am alfi LO
JCS Hi-Torque Ltd.,
Chilton Industrial Estate,
Sudbury,
Suffolk, CO10 2YH,
H GS H i-Grip
12 to 140
Rem arks
Cert. N o.
Marine, industrial, hydraulic
and offshore piping systems, as
10/ 00063(E2)
gas system installed on craft
less than 24m length or
pleasure yachts
09/ 00013(E2)
ind ustrial use for clam ping the
end s of flexible hoses.
92/ 00154(E5)
19 to 450m m
16 to 75m m
16 to 305m m
304 Stainless steel, w orm d rive clip, w ith round ed ed ges:
N om inal Diam eter(m m ):
Application
approval.
Licence L93/00020
148
Type
H I-TORQUE,
H TM;
H TLT;
H TJ;
H TJL
Details of Approval
Stainless steel, rectilinear, w orm d rive clip w ith round ed ed ges.
N om inal d iam eter (m m ):
27 to 500
Screw Material:
H TJ/ H TJL
H TM/ H TLT
316 stainless steel,
304 stainless steel
Application
ind ustrial use for clam ping the
end s of flexible hoses N D 27
to 500m m .
Rem arks
Cert. N o.
94/ 00049(E4)
Refer to certificate for Operational
Lim itations.
Sm all craft less than 24 m etres
and yachts for clam ping the
149
Type
Details of Approval
JCS Hi-Torque Ltd. ...continued
Band and H ousing Material:
H TJ/ H TJL
H TM/ H TLT
316 stainless steel
304 stainless steel
Application
Rem arks
end s of heavy d uty, w atercooled silencer/ exhaust
system s
N D 27 to 180m m .
Cert. N o.
94/ 00049(E4)
Worm Drive, H ose
Clips
BS5315:1991
SAE J1508 Type H D
304 and 316 Stainless Steel, ‘Jubilee’ hose clips:
304 Stainless Steel H igh Torqu e ‘Jubilee’ clips
Ind ustrial use for clam ping
the end s of flexible hoses
Kuzu Flex Metal San. ve Tic.
A.s BURSA SERBEST
BÖLGESI,
Ata Mah.,
Serbest Bölge Gelincik Cad.
N o.1 Gemlik /BURSA,
Turkey.
KZ 100 B
KZ 200 B
KZ 200 BB
Corrugated Metal H ose Assem bly:
Short joining lengths to
16/ 00015
Manuli Rubber Industries
SpA,
Manuli Hydraulics D ivision,
Via L. Cadorna, 73,
Vimodrone (Mi) 20090,
Italy.
EQUATOR/
BLACK;
EQUATOR/
EQUATOR/
BLACK;
EQUATOR/
hydraulic systems using
biological and mineral oils,
glycols and aqueous emulsion
oils
00/ 00119(E5)
Jubilee Clips Limited,
Ow ens Way,
Gads Hill,
Gillingham,
Kent, ME7 2RS,
96/ 00006(E4)
See Certificate for Application
Guid ance N otes
Licence L96/00080
1
1 BLUE;
2
2 BLUE
150 (KZ 100 B)
400 (KZ 200 B)
Fire safe flexible hose of non-metallic material with permanently
fitted couplings
Equator 1:
6 to 63
Max. w orking pressure (bar): 225 to 35
Equator 2 :
6 to 51
Max. w orking pressure (bar): 400 to 90
H oses are prod uced by Manuli
H yd raulics (Suzhou) and Manuli
Rubber Ind ustries, Ascoli. For d etails
of sizes see DAD 00/ 00119(E5)
150
Type
GOLDEN SPIR/ 4SH
GOLDEN SPIR/ 4SP
Details of Approval
fitted couplings
Goldenspir/ 4SH:
Nominal diameter (DN):
19 to 51
Max. working pressure (bar): 420 to 250
Goldenspir/ 4SP:
6 to 25
Max. working pressure (bar): 485 to 320
Application
Flexible hoses for hydraulic
systems using mineral oils,
oils
Rem arks
Cert. N o.
00/ 00120(E5)
Also prod uced by;
Manuli H yd raulics (Suzhou) Co., Ltd .
85 Xinglin Street
Suzhou Ind ustrial Park
P.R. China
151
Manuli Rubber Industries SpA
...continued
Type
TRACTOR/
TRACTOR/
TRACTOR/
TRACTOR/
1SC
1SN
2SC
2SN
Details of Approval
fitted couplings:
Nominal diameter (DN), 5 to 76 mm
Maximum working pressure (bar) 415 to 35
See m anufacturers d ata sheets for d etails
Application
systems using biological and
mineral oils, glycols and
aqueous emulsion oils
Rem arks
Cert. N o.
00/ 00121(E7)
H oses are prod uced in three separate
plants as d etailed in Design Appraisal
Docum ent no. 00/ 00121(E7)
H ARVESTER/ 17
fitted couplings:
6 to 12
Max. w orking pressure (bar): 210
high pressure systems using
oils
00/ 00122(E4)
H oses are prod uced in three separate
palnts. See DAD 00/ 00122(E4) for
d etails.
LYTEFLEX
Flexible hose of non-metallic material with permanently fitted
couplings:
N om inal d iam eter (DN )(Chinese plant): 6 to 25 m m
(Polish plant):
6 to 12m m
350 to 140
high pressure systems using
oils.
For systems and locations
where hoses are not required to
be of fire tested type.
00/ 00123(E4)
m arine applications.
H oses are prod uced by;
Manuli H yd raulics (Suzhou) Co., Ltd .
85 Xinglin Street
Suzhou Ind ustrial Park
People’s Republic of China
Manuli H yd raulics Manufacturing Sp.
z o.o.
ul. Przed siebiorcow 5
Rad om sko, 97-500
Poland
152
Manuli Rubber Industries SpA
...continued
Type
ROCKMASTER/
ROCKMASTER/
ROCKMASTER/
ROCKMASTER/
PLUS;
ROCKMASTER/
ROCKMASTER/
ROCKMASTER/
ROCKMASTER/
Details of Approval
12;
15;
1SC;
2
fitted couplings:
2SC;
2ST;
4SH
4SP
See m anufacturers d ata sheets for ind ivid ual sizes and w orking
pressu res
Nominal diameter (DN) DN 5 to DN 76 m m
COMPOTEC ® Com posite Flexible H oses
Matec Group Srl,
Via 1° Maggio,
7 - 20068 Peschiera,
Borromeo (MI),
Italy.
CH EM PZ, CH EM
PX, CH EM XX,
OIL ZZ, OIL ZX,
DRAIN TEC XZ,
DRAIN TEC XX
FOOD XX
PTFE XZ, PTFE XX
Description: Com potec® hoses EN 13765:2010 Type 3
Application:
Oil, Chem ical, H yd rocarbons
Bore Diam eter:
¾” to 12”
Tem perature Range:
-40 to 80° C (-40 to 100° C PTFE Type)
Max Working Pressure: 15 bar
10 bar for d iam eters
10” to 12”
CYROTEC 660 LG
XZ, CYROTEC 660
LG XX
CYROTEC 660 N XZ,
CYROTEC 660 N XX
Description: Com potec® hoses EN 13766:2010 Type 1 and 2
Application:
LPG and LN G system
Bore Diam eter:
¾” to 12”
Tem perature Range:
-50 to 80° C (Type 1)
-175 to 80° C (Type 2)
Max Working Pressure: Type 1 LPG 25 bar
Type 2 LN G 13 bar
10 bar w hen used for IBC and IGC
cargoes and for d iam eters 10” to 12”
Application
systems using mineral oils,
oils
Rem arks
Cert. N o.
00/ 00136(E7)
H oses are prod uced in four separate
plants as d etailed in Design Appraisal
Docum ent no. 00/ 00136(E7)
Flexible hoses for Oil,
Chem ical and H yd rocarbon
System s in LN G/ LPG carriers,
m arine and offshore
applications.
13/ 00002
153
N K Co. Ltd,
497, Shinpyeong-dong,
Saha-gu,
Busan, 603-836,
Korea, Republic of.
Type
G119-8K
Details of Approval
Application
Flexible hose assembly consisting of an inner tube of oil-synthetic
rubber, a single wire braid reinforcement, and an oil- and weatherresistant synthetic cover.
Device to connect high
pressure CO2 cylind ers to the
d istribution m anifold on
board the ship.
H ose inner/ outer d iam eter
Design pressure
Design tem perature
Rem arks
Cert. N o.
10/ 10037
: 12.7 m m / 18.8 m m
: 17.1 MPa (175 kg/ cm 2)
: - 60 °C ~ 100 °C
154
Type
N K Co., Ltd.,
#502 Gw akaksandan-ro,
Gangse-gu,
Busan,
Korea, Republic of.
G119-8K
PACO HITEC CO., LTD ,
156, Mieumsan-dan 3-ro,
Gangseo-gu,
Busan,
Korea, Republic of.
GOLDENSPIR/ 4SH
GOLDENSPIR/ 4SP
ROCKMASTER/ 4SH
ROCKMASTER/ 13
Application
Flexible hose assembly consisting of an inner tube of oil-synthetic
rubber, a single wire braid reinforcement, and an oil- and weatherresistant synthetic cover.
Device to connect high
pressure CO2 cylind ers to the
d istribution m anifold on
board the ship.
Expires : 13 June 2020
14/ 40006(E2)
glycols aqueous em ulsion oils
and w ater
15/ 40064
H ose inner/ outer d iam eter
Design pressure
Design tem perature
Rem arks
Cert. N o.
Details of Approval
: 12.7 m m / 18.8 m m
: 17.1 MPa (175 kg/ cm 2)
: - 60 °C ~ 100 °C
Flexible hose of non-m etallic m aterial w ith perm anently fitted
couplings:
GOLDEN SPIR / 4SH
N om inal d iam eter (DN ) : 19, 25, 31, 38, 51
Max. w orking pressure (bar) : 420, 385, 350, 300, 250
Working Temperature range (°C) : -40°C ~ +100°C
GOLDEN SPIR / 4SP
N om inal d iam eter (DN ) : 12, 16, 19, 25
Max. w orking pressure (bar) : 420, 380, 380, 320
ROCKMATER/ 4SH
N om inal d iam eter (DN ) : 19, 25, 31
Max. w orking pressure (bar) : 420, 385, 320
ROCKMATER/ 13
N om inal d iam eter (DN ) : 19, 25, 31, 38, 51
Max. w orking pressure
(bar) : 350
155
Type
TRACTOR/ 1SN
TRACTOR/ 2SN
Details of Approval
couplings:
See Paco H itec plan for pressure and tem perature ratings.
Application
glycols aqueous em ulsion oils
and w ater
Rem arks
Cert. N o.
15/ 40065
156
Parker Hannifin (Australia)
Pty. Ltd,
Lot 9 Chapple Street,
Wodonga, Victoria, 3690,
Australia.
Type
381
SAE100R2 Type AT,
ISO 1436 Type 2AT,
EN 853 Type 2SN
Details of Approval
Application
Double wire braid reinforced and rubber covered flexible hydraulic
hoses with permanently fitted couplings (Parker Coupling series
43)
For use on ships and offshore
length in system of fresh water,
compressed air, water based
hydraulics, hydraulic oil, fuel
and lubricating oil.
Expiry : 06 May 2015
For use on ships installations
classed with Lloyd’s Register,
as short length in system of
hydraulic fluids and lubricating
oils.
The hoses m ay be used for the follow ing w orking cond itions
Sizes: -6(3/ 8”), -8(1/ 2”), -10(5/ 8”), -12(3/ 4”) & -16(1”)
Maxim um Working Pressure: 17.5 MPa (2500 psi) to 35 MPa
(5000 psi)
Rem arks
Cert. N o.
10/ 10019
See Type Approval Certificate N o.
10/ 10019 for approval cond itions
Service Tem perature:
petroleum base hydraulic fluids and lubeicating oils
within a temperature range of -40°C to +100°C (-40°F to 212°F)
polyol ester fluid s up to +65°C (+150°F)
water, water/ oil emulsion and water/ glycol hydraulic
fluids up to +85°C (+185°F)
air up to +70°C (+158°F)
Parker Hannifin Connectors
Ltd,
215, Yoosan-D ong,
Yangsan,
Gyeongnam, 626-230,
Korea, Republic of.
701, 731, 771(721TC)
& 781(781TC)
Synthetic rubber flexible hoses reinforced with 4 plies of spiral
wrapped steel wire with permanently fitted couplings
Designation:
701 with coupling ’70 Series Fittings’
731 with coupling ’73 Series Fittings’
771(721TC) with coupling ’71 Series Fittings’
781(781TC) with coupling ’78 Series Fittings’
11/ 10048
Ratings
Sizes: 1/ 2”(12.7m m ) to 2”(50.8m m )
175 kg/ cm 2 (2500 psi) to 420 kg/ cm 2 (6000 psi)
701 & 731: -40°C to +100°C
771(721TC) & 781(781TC): -40°C to +125°C
157
Parker Hannifin Corporation,
1501 Hayes D rive,
Manhattan,
Kansas 66502,
(USA).
Type
H ose: 221 FR
Fittings: series 26
Details of Approval
Flexible hose assem blies w ith one w ire braid and rubber cover.
Design / Testing Cod es:
Lloyd 's Register ships and sm all craft rules
ISO 15540:1999
Application
Gasoline fuel, d iesel oil feed /
return lines, petroleum base
hyd raulic fluid s, lubricating
oil, fresh / sea w ater, w ater
glycol m ixtures and w ater /
oil em ulsion hyd raulic fluid s.
Rem arks
Cert. N o.
01/ 60021(E5)
158
Type
Details of Approval
Application
Rem arks
Pressure rating – 500psi
Parker Hannifin Corporation
...continued
Cert. N o.
01/ 60021(E5)
Maxim um tem perature ranges (°C):
a) Gasoline fuel, d iesel oil fuel, petroleum based hyd raulic fluid s
and lubricating oils: -20 to 100
b) Fresh / sea w ater, w ater / glycol m ixtures and w ater / oil
em ulsion hyd raulic fluid s: -20 to 85
as applicable.
Hose Product D ivision Europe,
Via G.B. Pirelli 6,
22070 Veniano (CO),
Italy.
H 29, H 31 & R42.
Fire and oil resistant synthetic rubber reinforced flexible hoses:
Parker Hannifin India Pvt.
Ltd.,
Khasara #145, 146, 153/1, 153/3,
157 Amravati Road,
Bazargaon,
N agpur - 440023,
Maharashtra,
India.
PIX-PERFORMER-1SN Flexible rubber hose assemblies
, 421SN
PIX-PERFORMER-2SN Sizes
,
Maxim um Working Pressure
301SN
Working tem perature
H yd raulic fluid
Water base fluid
Water
Air
Type
H 29
H 31
R42
N om inal
Diam eter (m m )
19 to 51
10 to 51
16 to 51
Max. Working
Pressure (bar)
430 to 280
445 to 210
420
05/ 00063(E1)
Med ium to high pressure
hyd raulic lines suitable for
m arine, m ining, offshore and
general ind ustrial applications
11/ 10050(E2)
Tem parature
(°C)
-40 to 100
-40 to 100
-40 to 100
: DN 5 to DN 102
: 2.5 to 25.0 MPa (1SN )
4.0 to 45.0 MPa (2SN )
:
:
:
:
Marine applications.
See Certificate for approval
cond itions.
- 40 °C ~ +100 °C
- 40 °C ~ +70 °C
0 °C ~ +70 °C
0 °C ~ +70 °C
159
Type
PIX-H IPULSE-4SP,
701
PIX-H IPULSE-4SH ,
731
Details of Approval
Sizes
Maxim u m Working Pressure
H yd raulic fluid
Water based fluid
Water
: DN 10 to DN 51 (4SP)
DN 16 to DN 51 (4SH )
: 18.0 to 46.0 MPa (4SP)
25.0 to 45.0 MPa (4SH )
: - 40 °C ~ +100 °C
: - 40 °C ~ +70 °C
: 0 °C ~ +70 °C
Application
H eavy d uty im pulsive high
pressure hyd raulic system s for
like excavators, d osers,
d um pers, cranes, com pacters,
rock breakers and hyd raulic
d rill rigs and other
construction equipm ents
Rem arks
Cert. N o.
11/ 10055(E2)
cond itions.
160
Parker Hannifin India Pvt.
Ltd. ...continued
Type
Details of Approval
PIX-IMPETUS-280,
721
PIX-IMPETUS-350,
781
PIX-IMPETUS-420,
791
PIX-ARMOUR-R12
PIX-ARMOUR-R15
Sizes
H yd raulic fluid
Water based fluid
Water
Sizes
H yd raulic fluid
Water based fluid
Water
Parker Hannifin
Manufacturing Srl,
Via GB Pirelli 6,
22070 Veniano (Co),
Italy.
301SN (SAE 100
R2AT) w ith series 48
421SN (SAE 100
R1AT) w ith series 48
H29 (ISO 3862 Type
: DN 10 to DN 51
: 28.0/ 35.0/ 42.0 MPa
: - 40 °C ~ +120 °C
: - 40 °C ~ +70 °C
: 0 °C ~ +70 °C
: DN 10 to DN 51
: 28.0/ 42.0 MPa
Application
Rem arks
H eavy d uty im pulsive high
pressure hyd raulic system s for
like excavators, d osers,
d um pers, cranes, com pacters,
rock breakers and hyd raulic
d rill rigs and other
construction equipm ents
Suited for hyd raulic circuit in
severe abrasion cond ition,
m arine application,
und erground and open pit
m ining
permanent piping systems, for
essential and non-essential
services.
Cert. N o.
11/ 10056(E2)
cond itions.
11/ 10057(E2)
cond itions.
: - 40 °C ~ +120 °C
: - 40 °C ~ +70 °C
: 0 °C ~ +70 °C
Medium and high pressure hydraulic hoses made up of an oil
resistant seamless synthetic rubber lining, with steel wire
reinforcement and a cover of black synthetic rubber resistant to
abrasion, oils, ozone and weathering.
16/ 20020
161
Type
4SH ) w ith series V4
H31 (ISO 3862 Type
4SP) w ith series VSV4
R42 (ISO 3862 Type
R15) w ith series V4V6
Fitting m aterial can
be carbon steel or
stainless steel
Details of Approval
Ratings:
Type
N om inal d iam eter (m m )
(bar)
Tem perature Range (0C)
421SN 301SN H 29
H 31
R42
6 to 51
6 to 51
19 to 51
6 to 51
16 to 51 40 to 225
Max. Working Pressure
Application
Rem arks
Cert. N o.
Restrictions:
N ot to be used for
applications w here hoses are
frequently flexed in service
162
Type
Application
Rem arks
80 to 400
280 to 430
210 to 445
420
-40 to +100
-40 to +100
-40 to +100
-40 to +100
-40 to +100
Parker Hannifin
Manufacturing Srl ...continued
Parker ITR Srl,
Via G.B. Pirelli 6,
22070 Veniano Como,
Italy.
Details of Approval
CARBOCORD
EN ISO 7840 A1
CARBOPRESS
EN ISO 7840 A1
30 to 102
2.5
-20 to +80
4 to 25
3.4
-20 to +80
N om inal size (DN )
Working pressure (bar)
Tem perature range (0C)
19 to 102
2.5
-20 to +80
19 to 125
3
-30 to +100
05/ 00113(E1)
05/ 00114(E1)
See Design Appraisal Docum en t
Fuel hoses on recreational
craft.
Cooling w ater, exhaust system s and fire resistant fuel hoses
craft.
Fire resistant fuel hose
SM/ TR 311
SM/ TR 311 ON D
craft.
CARBURITE
EN ISO 7840 A1
16/ 20020
Cert. N o.
05/ 00115(E1)
See Design Appraisal Docum ent EN G
93815cr
Cooling w ater, exhaust
system s and fire resistant fuel
hoses on recreational craft
05/ 00116(E1)
163
Type
462
492
372
Details of Approval
H yd raulic hoses
Application
Marine piping system s.
Rem arks
101764
Cert. N o.
06/ 00097(E1)
164
Parker ITR Srl ...continued
Type
Details of Approval
Type
Max Working
Pressure (MPa)
42.5
40.0
35.0
31.0
28.0
28.0
21.0
17.2
Application
462
462
462
462
462
462
462
462
Diam eter
(DN )
6
8
10
12
16
20
25
32
Tem perature
( 0C)
-40 to +100
-40 to +100
-40 to +100
-40 to +100
-40 to +100
-40 to +100
-40 to +100
-40 to +100
492
492
492
492
492
492
492
492
6
8
10
12
16
20
25
32
28.0
25.0
22.5
19.0
15.0
15.0
11.0
7.5
-40 to
-40 to
-40 to
-40 to
-40 to
-40 to
-40 to
-40 to
+100
+100
+100
+100
+100
+100
+100
+100
372
372
372
372
372
10
12
16
20
25
44.5
41.5
35.0
28.0
21.0
-40 to
-40 to
-40 to
-40 to
-40 to
+100
+100
+100
+100
+100
Rem arks
Cert. N o.
06/ 00097(E1)
165
A.S.,
Organize Sanayi Bölgesi
Atatürk Cad.,
6, Sok. N o.3 Çerkezköy,
Tekirdag,
Turkey.
Type
POWERSTREAM
4SP/ R9R
Details of Approval
Application
mineral, vegetable and glycol based hydraulic oil resistant synthetic
rubber, four reinforcement layers of steel wire spirals, and an outer
cover of abrasion and weather resistant synthetic rubber:
Diameter
(inch):
1/ 4
3/ 8
1/ 2
Max. working
pressure (bar):
450
445
420
Temperature range (°C):
Impulse test
results (cycles):
3,007,900
2,018,850
3,025,250
Marine, ind ustrial, hyd raulic
and offshore piping system s,
as short joining lengths to
Rem arks
Cert. N o.
10/ 00047
– 40 to 100
166
Prospero Oy,
Tulotie 6,
FI-33470 Ylöjärvi,
Finland.
Type
Details of Approval
Metal hose assem bly
LSW5601-1 and
LSW5601-2
Double Wall Metal H ose Assem blies
LSO-65/ 125-02
(RS331S12 /
RS330S12)
Double-w all corrugated m etal flexible hose assem bly w ith
external w ire braid ing and perm anent end fittings:
Test pressure (bar)
Design Tem perature (0C)
Length (m m )
LSW5601-3
LSW7903-01X
Max w orking Pressure:
Design Tem perature:
Size:
Rem arks
Cert. N o.
06/ 00065(E1)
For use in natural gas piping
system s as short joining
lengths to accom m od ate
relative m ovem ent betw een
item s of m achinery connected
to perm anent piping system s.
For use in engine fuel gas
supply system s to
accom pod ate relative
m ovem ent betw een
m achinery and fixed piping
system s..
H ose assem bly for gas
services.
13/ 00038
approval.
EN 1.4404
EN 1.4301
EN 1.4404
Double Wall Metal H ose Assem blies:
N om inal size (DN ):
Design Tem perature (°C):
Length (m m ):
Engine gas supply system s.
100
10
20
70
400 to 1500
Diam eter (m m ):
DN 65 and DN 125
Max. w orking pressure (bar): 10
Design tem perature (0C):
-20 to 60
Material: H ose:
Braid :
End fittings:
Application
150/ 100m m
10
70
1295
30 bar
-10/ +70° C
DN 50
13/ 00044
See certificate for approval
cond itions.
13/ 00091
See Certificate for Other Cond itiions.
167
Type
PRRA-2
PRRN -1
PRRA-1
Details of Approval
Flexible bellow s for LN G fuel storage tank:
Tem perature range (0C):
800/ 300/ 250/ 200/ 150/ 125/ 80
10 (DN 800 1bar )
– 196 to +60
Application
Liquid and gas feed from
LN G tanks
Rem arks
Cert. N o.
14/ 00001
See Certificate for cond itions of
approval
168
Prospero Oy ...continued
Type
LSW0092-7
Details of Approval
Max w orking Pressure:
Design Tem perature:
Size:
S-W03 and S-W10
Application
H ose assem bly for gas
services
10 bar
-10/ +70° C
DN 50
Double w all m etal com pensator, DN 80 and DN 125
Double w all m etal
hose assem bly
LSW3415-3
Cert. N o.
14/ 00012
See Certificate for Other Cond itons
For engine cylind er gas feed
pipe
Ratings:
Design temperature:
Design pressure:
Design cycle:
Inner flange:
Outer flange:
Axial m ovem ent:
Lateral m ovem ent:
Angular m ovem ent:
Inner flange d iam eter:
Outer flange d iam eter:
Material Specifications:
Com ponent Inner
Bellow
EN 10088-2 (1.4404)
Flange
EN 1.0088-3 (1.4404)
Pipe
EN 10217-7 (1.4404)
Rem arks
14/ 00017(E1)
See Certificate for Oth er Cond itions.
70oC
10bar
1000
DN 80
DN 125
+/ -10m m
0
0
DN 180 X 20
DN 250x22
Outer
EN 10088-2 (1.4404)
EN 1.0088-3 (1.4404)
EN 10217-7 (1.4404)
Double w all m etal hose assem bly
125/ 80m m
Design pressure (bar)
10
70
Length (m m )
1294 m m
Engine fuel gas feed system .
14/ 00034
169
Type
Double w all m etal
hose assem bly
LSW- T065-02
Details of Approval
Double w all m etal hose assem bly
100/ 65m m
10
70
Length (m m )
400m m - 2000 m m
Application
Engine fuel gas feed system .
Rem arks
Cert. N o.
14/ 00037
Other Cond itions.
170
Prospero Oy ...continued
Type
LSW0092-1
Double w all m etal
hose assem bly
LSW-100-01
LSW-125-01
Details of Approval
Application
Rem arks
Cert. N o.
Single w all m etal hose assem bly for ventilation air of d ouble
w alled pipew ork.
25m m
10
-10/ 70
Length (m m )
8004 m m
Double w all gas piping
system s.
14/ 00078
64/ 100 m m . N B d ouble w all engine cylind er gas feed pipe for
gas fuelled engine. The outer pipe is ventilated w ith air.
25m m
10
-10/ 70
Length (m m )
400 – 1500 m m .
Double w all gas piping
system s.
Annularly corrugated stainless steel flexible hoses w ith d ouble
stainless steel w ire-braid ing.
As short joining lengths for
ship installations in oil m ist
system s
15/ 20061
ship installations for essential
and non-essential com pressed
air and starting air system s
15/ 20072
installations classed w ith
Lloyd ’s Register, as short
lengths in system s of fresh
and seaw ater, com pressed air,
w ater base hyd raulics,
hyd raulic oil
08/ 10090(E2)
MTES/ EN G/ PAS/ WP18447053/
W03771859.
15/ 00027
Size
DN 100 DN 125
Deign Pressure [bar]: 10
10
LSW050-1
Annularly corrugated stainless steel flexible hose assem bly w ith
single stainless steel w ire-braid ing
Type LSW0520-1
Size
DN 50
Design Pressure [bar] 30
Ryco Hydraulics,
19 Whitehall Street,
Footscray, Victoria 3011,
Australia.
SAE 100R1
Avenger T1A
Diehard T1D
Slid er T1S
Survivor RQP1
Avenger T3KA
Diehard T3KD
Slid er T3KS
T1E Ad vantage
Synthetic rubber hose w ith one internal steel w ire braid
Avenger T1A
DN (m m ) : 5
6
8
10 12 16 19 25 31 38 51
MAWP (bar): 250 225 215 180 160 130 105 90 65 50 40
Tem perature Range: -40°C to +100°C
08/ 10090(E2) for approval cond itions
171
Type
DF1E Ad vantage
Fire Suppression T1F
Details of Approval
Diehard T1D
DN (m m ) : 5
6
8
10 12 16 19 25 31 38 51
MAWP (bar: 250 225 215 180 160 130 105 90 65 50 40
Tem perature Range -40°C to +100°C
Application
Rem arks
Cert. N o.
Place of Production
RYCO Hydraulics Pty. Ltd.
19 Whitehall Street, Footscray,
Victoria 3011 Australia
172
Ryco Hydraulics ...continued
Type
Details of Approval
Application
Rem arks
Slid er T1S
DN (m m ) : 5
6
8
10 12 16 19 25 31 38 51
MAWP (bar): 250 225 215 180 160 130 105 90 65 50 40
RYCO Hydraulics Sdn. Bhd.
Plot 207, Kuala Ketil Industrial Estate,
09300 Kuala Ketil, Kedah Darulaman,
Malaysia
Survivor RQP1
DN (m m ) : 6
8
10 12 16 19 25
MAWP (bar): 225 215 180 160 130 120 90
RYCO Hydraulics (Dalian) Ltd.
38 Ying Ri Road, Ying Cheng Zi
Industrial Zone, Gan Jing Zi District,
Dalian 116036 China
Cert. N o.
08/ 10090(E2)
Avenger T3KA
DN (m m ) : 6
8
10 12
MAWP (bar): 210 210 210 210
Diehard T3KD
DN (m m ) : 6
8
10 12
MAWP (bar): 210 210 210 210
Slid er T3KS
DN (m m ) : 6
8
10 12
MAWP (bar): 210 210 210 210
T1E Ad vantage
DN (m m ) : 5
6
8
10 12 16 19 25 31 38 51
MAWP (bar): 250 225 215 180 160 130 105 90 65 50 40
DF1E Ad vantage
DN (m m ) : 6
8
10 12 16 19
MAWP (bar): 225 215 180 160 130 105
25
88
173
Type
Details of Approval
Application
Rem arks
Cert. N o.
Fire Supression T1F
CN (m m ) : 5
6 8 10 12 16 19 12
MAWP (bar): 250 225 215 180 160 130 105 90
174
Type
Details of Approval
Application
SAE 100R2
Avenger T2A
Diehard T2D
T2E Ad vantage
Icebreaker T2C
Diehard TXA2D
Slid er T2S
Synthetic rubber hose w ith tw o internal steel w ire braid s
Survivor RQP2
Dinflex DF2A
DF2E Ad vantage
Avenger T3KA
Diehard T3KD
Slid er T3KS
Diehard T2D
DN (m m ) : 6
8
10 12 16 19 25 31 38 51 63
76
MAWP (bar): 420 350 350 350 250 215 175 140 100 90 70
70
Place of Production
T2E Ad vantage
DN (m m ) : 6
8
10 12 16 19 25 31 38 51 63
MAWP (bar): 420 350 350 345 250 215 175 140 100 90 70
Malaysia
Icebreaker T2C
DN (m m ) : 6
8
10 12 16 19 25 31 38 51
MAWP (bar): 420 350 350 350 250 215 175 140 100 90
Dalian 116036 China
Avenger T2A
DN (m m ) : 6
8
10 12 16 19 25 31 38 51 63
76
MAWP (bar): 420 350 350 350 250 215 175 140 100 90 70
70
and seaw ater, w ater based
hyd raulics, hyd raulic oil,
pneum atics, fuel and lube oil
Rem arks
Cert. N o.
08/ 10091(E2)
Diehard TXA2D
DN (m m ) : 12 16 19 25 31
MAWP (bar): 375 350 313 225 175
175
Type
Details of Approval
Slid er T2S
DN (m m ) : 6
8 10 12 16 19 25
MAWP (bar): 420 350 350 350 250 215 175
Application
Rem arks
Cert. N o.
31 38 51
40 100 90
176
Type
Details of Approval
Survivor RQP2
DN (m m ) : 6
8
10 12 16 19 25 31 38 51
MAWP (bar): 400 350 350 300 250 215 167 150 100 90
Tem perature Range
Petroleum -base fluid s: -40°C to +150°C
Water/ oil em ulsions: to +121°C
Diesel fuels: to +93°C
Air: to +121°C (m ax. pressure m ust be red uced by 30%)
Application
Rem arks
Cert. N o.
08/ 10091(E2)
Dinflex DF2A
DN (m m ) : 6 10 12 16 19
25
MAWP (bar): 420 350 295 250 215 167
DF2E Ad vantage
DN (m m ) : 6 10 12 16 19
25
MAWP (bar): 420 350 295 250 215 167
Avenger T3KA
DN (m m ) : 16 19 25
MAWP (bar): 210 210 210
177
Type
Details of Approval
Application
Rem arks
Cert. N o.
Diehard T3KD
DN (m m ) : 16 19 25
MAWP (bar): 210 210 210
Slid er T3KS
DN (m m ) : 16 19 25
MAWP (bar): 210 210 210
178
Type
SAE 100R12
Avenger H 12A
Diehard H 12D
Slid er H 12S
Details of Approval
Synthetic rubber hose w ith four internal steel w ire braid s
Avenger H 12A
DN (m m ) : 10 12 16 19 25 31 38 51
MAWP (bar): 350 350 350 350 350 275 255 210
Application
and seaw ater, w ater base
hyd raulics, pneum atics, fuel
and lube oil
Diehard H 12D
DN (m m ) : 10 12 16 19 25 31 38 51 63
MAWP (bar): 350 350 350 350 350 275 255 210 140
Synthetic rubber hose w ith four to six intern al steel w ire braid s
Avenger H 13A
DN (m m ) : 19 25 31 38 51
MAWP (bar): 350 350 350 350 350
Cert. N o.
08/ 10092(E2)
Place of Production
Malaysia
Dalian 116036 China
Slid er H 12S
DN (m m ) : 10 12 19 25 31 38 51
MAWP (bar): 350 350 350 350 275 255 210
SAE 100R13
Avenger H 13A
Diehard H 13D
Slid er H 13S
Rem arks
and seaw ater, hyd raulics,
08/ 10093(E2)
Place of Production
179
Type
Details of Approval
Diehard H 13D
DN (m m ) : 19 25 31 38 51
MAWP (bar): 350 350 350 350 350
Slid er H 13S
DN (m m ) : 19 25 31 38 51
MAWP (bar): 350 350 350 350 350
Application
Rem arks
Cert. N o.
Malaysia
Dalian 116036 China
180
Type
SAE 100R15
Diehard H 15D
Details of Approval
Synthetic rubber hose w ith four to six internal steel w ire braid s
Diehard H 15D
DN (m m ) : 19 25 31 38 51
MAWP (bar): 420 420 420 420 420
Tem peratu re Range: -40°C to +121°C
Application
Rem arks
Cert. N o.
08/ 10094(E2)
Place of Production
Malaysia
Dalian 116036 China
EN 856 4SP/ 4SH
Avenger R4SPA
Diehard R4SPD
Avenger R4SH A
Diehard R4SH D
H SPE Ad vantage
Synthetic rubber hose w ith four internal steel w ire braid s
Avenger R4SPA
DN (m m ) : 10 12 16 19 25
MAWP (bar): 445 420 380 380 350
08/ 10095(E2)
Place of Production
181
Type
Details of Approval
Application
Rem arks
Diehard R4SPD
DN (m m ) : 10 12 16 19 25
MAWP (bar): 445 420 380 380 350
Malaysia
Avenger R4SH A
DN (m m ) : 19 25 31 38 51
MAWP (bar): 420 380 350 300 250
Dalian 116036 China
Cert. N o.
182
Type
Details of Approval
Application
Rem arks
Diehard R4SH D
DN (m m ) : 19 25 31 38 51
MAWP (bar): 420 380 350 300 250
Cert. N o.
08/ 10095(E2)
H SPE Ad vantage
DN (m m ) : 12 16 19 25
MAWP (bar): 420 350 350 320
SAE 100R4
SAE 100R3
Suction SR
Defiant SRF
Textile M2
Synthetic rubber hose w ith one to tw o textile braid s
and seaw ater, petroleum and
w ater base hyd raulics
Suction SR
DN (m m ) : 19 25 63 76
MAWP (bar): 21 17 4.3 3.9
Place of Production
Defiant SRF
DN (m m ) : 19 25 31 38 51
MAWP (bar): 21 17 14 10 7
Malaysia
Dalian 116036 China
Textile M2
DN (m m ) : 6 10 12 19
MAWP (bar): 88 79 70 52
08/ 10096(E2)
183
Type
Isobaric Hose
H 3000A/ D/ S,
H 4000A/ D/ S,
H 5000A/ D/ S,
H 6000A/ D/ S,
Details of Approval
Synthetic rubber hose w ith m ultiple alternating layers of
spiralled high tensile steel w ire, or one or tw o braid s of high
tensile steel w ire
Application
lengths in system s of
hyd raulic oil
Rem arks
Cert. N o.
13/ 10069
184
Type
T3000A/
T3600A/
T4000A/
T5000A/
T6000A/
D/
D/
D/
D/
D/
S,
S,
S,
S,
S
Details of Approval
Application
Rem arks
H 3000 Avenger/ Diehard / Slid er
DN (m m ) : 31, 38, 51
MAWP
: 215 bar
Place of Production
DN (m m ) : 10, 12, 16, 19, 25, 31, 38, 51
MAWP
: 280 bar
Malaysia
DN (m m ) : 10, 12, 16, 19, 25, 31, 38, 51
MAWP
: 350 bar
Dalian 116036 China
Cert. N o.
13/ 10069
DN (m m ) : 10, 12, 16, 19, 25, 31, 38, 51
MAWP
: 420 bar
T3000 Avenger/ Diehard / Slid er
DN (m m ) : 6, 8, 10, 12, 16, 19, 25
MAWP(bar) : 245, 245, 215, 215, 215, 215, 215
DN (m m ) : 6, 8, 10, 12, 16, 19, 25
MAWP
: 250 bar
DN (m m ) : 6, 8, 10, 12, 16, 19, 25
MAWP
: 280 bar
185
Type
Details of Approval
Application
Rem arks
Cert. N o.
DN (m m ) : 6, 8, 10, 12
MAWP
: 350 bar
186
Type
Details of Approval
Application
Rem arks
DN (m m ) : 6, 8, 10, 12
MAWP
: 420 bar
Biotrans Hose
Biotrans BT1
Synthetic rubber hose w ith one braid of high tensile steel w ire
Cert. N o.
13/ 10069
lengths in system s of w ater,
hyd raulic oil, com pressed air,
fuel and lubricating oil
Biotrans BT1
DN (m m ) : 6, 8, 10, 12, 16, 20, 25
MAWP
: 50 bar
13/ 10070
Place of Production
Malaysia
Dalian 116036 China
Driller Hose
Driller D2B
Synthetic rubber hose w ith tw o braid s of high tensile steel w ire
and sea w ater, hyd raulic oil
and airl
13/ 10071
187
Type
Details of Approval
Driller D2B
DN (m m )
: 38 51
MAWP (bar) : 100 90
Application
Rem arks
Cert. N o.
Place of Production
Malaysia
188
Type
Details of Approval
Application
Polyester Cover Hose
Survivor RQP5,
Trucker T5
Synthetic rubber hose w ith polyester inner braid covered w ith
one braid of high tensile steel w ire, or one braid of high tensile
steel w ire
hyd raulic oil, fuel oil,
lubricating oil and
com pressed air
Trucker T5
DN (m m )
: 5 6
8 10 12 16 22 28 35 46
MAWP (bar) : 210 210 155 138 121 103 55 43 35 24
TEFLON hose w ith one braid of high tensile Grad e 304 stainless
steel w ire
Cert. N o.
Dalian 116036 China
13/ 10071
13/ 10072
Place of Production
Survivor RQP5
DN (m m )
: 5 6
8 10 12 16 22 28 35 46
MAWP (bar) : 210 210 155 138 121 103 55 43 35 24
TEFLON Hose
TEFLON RTH 1
Rem arks
09300 Kuala Ketil, Kedar Darulaman,
Malaysia
Dalian 116036 China
hyd raulic oil
13/ 10073
189
Type
Details of Approval
TEFLON RTH 1
DN (m m )
: 6 10 12 16 19 25
MAWP (bar) : 170 165 120 105 85 55
Application
Rem arks
Cert. N o.
Place of Production
190
Type
Details of Approval
Application
Dolphinflex LNG
White STS
Non-metallic Composite Flexible Cargo hose with Permanen t
Couplings
N om inal Size : 1 to 12 inch
Max.w orking pressure : 10.5 bar
Design tem perature : -196 to +50 °C
Cert. N o.
Malaysia
Dalian 116036 China
13/ 10073
Marine use for cargo piping
system s for ship -to-shore or
ship-to-ship transfer
connection.
15/ 40092
Tem porary transfer for inert
gas system
15/ 40115
ind ustrial piping system s, as
10/ 00048
SAN GBON G
CORPORATION ,
166-1, Seonghae-ri,,
Anjung-eup,,
Pyeongtaek-si,,
Gyeonggi-do,,
Korea, Republic of.
Rem arks
Testing stand ard s : EN 1472-2
Dolphinflex Vapor
Polyurethane H ose
couplings:
N orm inal d iam eter (inch) : 8”, 10”, 12”
Max. w orking pressure (bar) : 0.4 bar
Scandflow AB,
Agneshögsgatan 22,
591 71 Motala,
Sw eden.
Tubiflex SP.T.9750
Flexible m etallic hose assem blies w ith a single external w ire
braid ing, w ith pernm anent end fittings:
Material: H ose:
Braid :
End fittings:
H ose d iam eter (DN ):
Max. operating pressure (bar):
316L statinless steel
304 stainless steel
316L stainless steel
approval.
10 to 100
75 to 14
191
Type
SCORPI Flexibles et Raccords,
320 Rue Ampere,
Z.I. Lyon-N ord,
69730 Genay,
France.
Scorpi 44001-001
Senior Flexonics GmbH,
Frankfurter Str. 199,
34121 Kassel,
Germany.
SB-MTU
N A/ 43880
Details of Approval
Fire resistant flexible hose assem bly:
Working tem perature (°C):
80
120
Corrugated m etal hose assem bly
N A/ 43880
DN 25 acc. to plan no.
Ratings :
Deressurised
Max. Tem perature 220 °C
N A 45346
N A 46085
Stainless steel corrugated hose based on hose Type TUBOFLEX
Ratings: DN 8 and DN 10,
WP = 140 bar
MW 22 U1/ U2
DW 72 U1/ U2
DW 32 U1/ U2
Corrugated metal hoses with one or two wire braids and
permanently welded on end fittings, all stainless steel.
Materials:
Hose
: 1.4541 or 1.4571 or 1.4404
Wire Braids
: 1.4301
(Other materials on request)
Application
Rem arks
Cert. N o.
For inlet and spill rail
connections for d iesel engine
fuel injection pum ps. To
m ovem ent betw een
system s.
.
00/ 00030(E3)
Flexible element in an oil return
pipe for lubricating- and
cooling oil of exhaust
turbochargers for marine diesel
engines.
02/ 20013(E2)
Sprinkler hoses for ships and
w ith Lloyd ´s Register
02/ 20025(E3)
Metal cargo- and process hoses
in piping systems on gas and
chemical carriers, classed or
Lloyd’s Register.
03/ 20024(E2)
See Certificate for Operational
Lim itations
Ratings
192
Type
Details of Approval
Application
Rem arks
Cert. N o.
MW 22 MW 22 DW 72 DW 72 DW 32 DW 32
U1
U2
U1
U2
U1
U2
-------------------------- MAWP(bar) ----------------------------------------DN 8
100
DN 10
100
DN 12
100
DN 16
63
100
DN 20
40
100
DN 25
25
63
DN 32
25
40
-
193
Type
Details of Approval
DN
DN
DN
DN
DN
DN
DN
DN
DN
DN
Senior Flexonics GmbH
...continued
40
50
65
80
100
125
150
200
250
300
25
25
16
16
10
10
16
10
-
-
40
25
25
25
-
Application
40
-
25
16
-
Rem arks
25
25
16
10
-
Cert. N o.
03/ 20024(E2)
10
Temperature Range: - 196°C to + 550°C
TUBOFLEX Stainless
Steel Single Wall
Corrugated H oses
Stauff UK Ltd,
500 Carlisle Street East,
Sheffield, S4 8BS,
Annularly corrugated stainless steel flexible hoses w ith stain less
steel w ire braid reinforcem ent and connectors.
Type
Braidings
without
single
Nom.
Diam.
[mm]
8 – 300
8 – 300
Design
Pressure
[bar]
10 – 0.1
80 – 4
MW22U0
MW22U1
MW23U0
MW23U1
DW72U0
DW72U1
DW72U2
DW32U0
DW32U1
DW32U2
without
single
without
single
double
without
single
double
8 – 200
8 – 200
12 – 80
12 – 80
12 – 80
100 – 300
100 – 300
100 – 300
7 – 0.1
80 – 5
10 – 2
90 – 28
105 – 39
0.6 – 0.2
16 – 4
20 – 10
Flexible hose assem blies w ith perm anently attached end fittings:
1SN :
2SN :
1SN K:
2SN K:
Diam eter (inch):
3/ 16 to 2
3/ 16 to 2
¼ to 1¼
¼ to 1¼
Max w orking pressure (bar):
250 to 40
415 to 80
290 to 100
450 to 175
For use in ind ustrial, m arine
and offshore field s to convey
liquid s and gases at
tem peratures ranging from –
196°C to +550°C
96/ 20004(E4)
As short joining lengths of
system s.
12/ 00024
Refer to Stauff d ata sheets for actual
m axim um w orking pressure and
tem perature ranges for specific hose
types and d iam eters.
194
Stauff UK Ltd ...continued
SUMITOMO RIKO CO. LTD ,
SUMITOMO RIKO CO. LTD ,
1 Higashi 3-chome,
Komaki-shi, Aichi ken, 4858550,
Japan.
Type
Details of Approval
4SP:
4SH :
Multispiral R13
Multispiral R15:
Therm oplastic R7:
Therm oplastic R8:
Therm oplastic 1 w ire
STRATOFLEX
IB, IBG, GHD,
M-GHD, SHD and
HD series
IB 35x52
IBG 35
IBG 70
IB 70x105
IB 105x160
IBG 140
IB 140x210
IBG 210
IB 210x315
IB 250x375
IBG 280
GH D 280
SH D280
M-GH D 280
H D 280
3/ 8 to 2
¾ to 2
¾ to 2
¾ to 1½
1/ 8 to 1¼
1/ 8 to 1¼
1/ 8 to 1
445 to
420 to
350
420
207 to
420 to
350 to
Application
165
250
Size
IB 35x52, 105x160, 140x210, 210x315, 250x375
: 32 m m to 50 m m
IB 70x105
: 32m m to 65m m
IB 280x420
: 32 m m to 38 m m
IBG 35
: 32 m m to 50 m m
IBG 70
: 6 m m to 65 m m
IBG 140, 210
: 6 m m to 50 m m
:
:
:
:
:
:
:
:
Cert. N o.
See certificate for conitions of
approval
12/ 00024
09/ 10008(E3)
70
1200
100
Flexible H oses Assem bly
IBG 280
IBG 350
GH D 280
GH D 350
M-GH D 280
M-GH D 350
SH D 280, 320, 350
H D 280, 320, 350
Rem arks
6 m m to 12 m m
6 m m to 9 m m
15 m m to 25 m m
12 m m to 25 m m
15 m m to 25 m m
12 m m to 25 m m
19 m m to 25 m m
32 m m to 50 m m
Marine use for piping systems
in ships
Kind of fluid:
Hydraulic oil, Lubricating oil,
Water, Sea water, Compressed
air and Sanitary water
Other place of prod uction
TRI Hose Sales Ltd,
Osaka Plant
1, Horimizokitamachi 3-ban,
Neyagawa-shi, Osaka-fu,
572-0810 Japan
TRI Hose Sales Ltd,
Nagoya Plant
86, Wakakusa-cho, Komaki-shi,
Aichi-ken,
485-0031 Japan
TRI Kyoto Ltd,
1, Toyosaka-cho, Ayabe, Kyoto,
623-0117 Japan
195
Type
IB 280x420
SH D 320
H D 320
IBG 350
GH D 350
SH D 350
M-GH D 350
H D 350
Details of Approval
Design Pressure
IB 35x52, IBG 35
IBG 70, IB 70x105
IB 105x160
IBG 140, IB 140x210
IBG 210, IB 210x315
IB 250x375
IBG 280, GH D 280, SH D
280x420
SH D 320, H D 320
Application
Rem arks
Cert. N o.
: 3.5 MPa
: 7.0 MPa
: 10.5 MPa
: 14.0 MPa
: 21.0 MPa
: 24.0 MPa
280, M-GH D 280, H D 280, IB
: 28.0 MPa
: 32.0 MPa
196
Type
Details of Approval
Application
Rem arks
IBG 350, GH D 350, SH D 350, M-GH D 350 : 35.0 MPa
SUMITOMO RIKO CO. LTD
...continued
Cert. N o.
09/ 10008(E3)
Operation tem perature range
IB & IBG series
: -40 ~ +100ºC
GH D, M-GH D, SH D & H D series : -40 ~ +120ºC
Other cond itions
1) The use of flexible hoses should be restricted to short joining
length only between various items of machinery and the
permanent piping systems where some degree of flexibility is
essential.
2) The flexible hoses should be fitted in readily visible positions.
3) Hose assemblies with couplings made of carbon steel are not to
be used at temperatures below -10°C unless the material is
normalized.
The Yokohama Rubber Co.,
Ltd,
2-1, Oiw ake,
Hiratuka-city,
Kanagaw a-pref., 254-8601,
Japan.
Fire resistant type :
“OMB-F” & “NWP”
series
Marine use on ships
hydraulic oil, Lubricating oil,
fuel oil, fresh water, sea water
and compressed air
OMB-F series
Sizes (Insid e Dia.)
OMB10F: 6.3 mm ~ 19.0 mm
OMB15F: 15.9 mm
OMB20F: 6.3 mm ~9.5 mm
OMB25F: 6.3 mm ~ 9.5 mm
o
Design tem perature: : -40 C ~ +120 C
N WP series
Sizes (Insid e Dia)
NWP35: 6.3 mm ~ 50.8 mm
NWP70: 6.3 mm ~ 31.8 mm
NWP105: 6.3 mm ~ 25.4 mm
NWP140: 6.3 mm ~ 12.7 mm
NWP175: 6.3 mm ~ 12.7 mm
NWP210: 6.3 mm ~ 12.7 mm
NWP350: 6.3 mm ~ 9.5 mm
13/ 10088
Place of prod uction
The Yokohama Rubber Co., Ltd.,
Hiratsuka East Plant
4-6-40, Higashi-Yawata, Hiratsuka-city,
Kanagawa-pref. 254-0016 Japan
The Yokohama Rubber Co., Ltd., Ibaraki
Plant
Design pressure: 17.0 MPa ~ 27.5 MPa
o
Other conditions
should be restricted to
short joining length only
between various items of
machinery and the
1, Hatori-Nishi, Omitama-city, Ibarakipref. 319-0198, Japan
Fuji Koatsu Flexiblehose Co., Ltd.
6-2-20, Shimada, Hikari-city, Yamaguchipref. 743-8691 Japan
197
Type
Details of Approval
Design pressure: 3.5 MPa ~ 34.5 MPa
The Yokohama Rubber Co.,
Ltd ...continued
Application
2)
The flexible hoses should
positions.
3)
Hose assemblies with
couplings made of carbon
steel are not to be used at
normalized.
4)
Flexible hose assemblies
constructed of nonmetallic materials
intended for installation in
piping systems for
flammable media, and sea
water systems where
failure may result in
flooding, are to be of fireresistant type.
Design tem perature : -40oC ~ +100oC
“OMB25F series:OMB25F-08
OMB25F-10
OMB25F-12
OMB25F-16
Flexible rubber hose assemblies, non fire-resistant type
Sizes (Insid e Diam eter)(m m ): 12.7, 15.9, 19.0, 25.4
Design pressure (MPa): 27.5
Design tem perature (˚C): -40 ~ +120
Marine use on ships
hydraulic oil, lubricating oil,
fresh water, sea water and
compressed air.
See the Certificate for other
conditions.
Rem arks
4)
Flexible hose assemblies
constructed of non-metallic
materials intended for installation
in piping systems for flammable
media, and sea water systems
where failure may result in
flooding, are to be of fire-resistant
type.
Cert. N o.
13/ 10088
15/ 10004
Place of production
Nagano Plant
548 Yoshida, Takamori-cho,
Shimoina-gun, Nagano Pref., 3993102, Japan
Ibaraki Plant
1, Hatorinishi, Omitama City,
Ibaraki Pref., 319-0198, Japan
198
Type
Details of Approval
Application
Rem arks
Cert. N o.
Yamasei Kogyo Co., Ltd.
22, Motonaruo-cho, Minami-ku,
Nagoya-city, 457-0065, Japan
Fuji Koatsu Flexible Hose Co., Ltd.
6-2-20, Shimata, Hikari City,
Yamaguchi Pref., 743-0063, Japan
199
TheYokohama Rubber Co.,
Ltd.,
Hiratsuka East Plant 6-40,
Higashiyaw ata 4-chome,
Hiratsuka-city,
Japan.
Type
“OMB” series
(Fire-resistant type &
Non fire-resistant
type) and
“N300N” series (Fireresistant type)
Details of Approval
OMB series
Sizes (Insid e Dia) : 31.8 m m ~ 50.8 m m
Design Presure: 17.0 MPa ~ 27.5 MPa
Design tem perature : -40˚C ~ +120˚C
N 300N series
Sizes (Insid e Dia) : 63.5 m m ~ 101.6 m m
Design Presure: 3.0 MPa ~ 5.0 MPa
Design tem perature : -20˚C ~ +80˚C
Application
Marine use on ships
hydraulic oil, Lubricating oil,
fuel oil, fresh water, sea water
and compressed air
Other conditions
should be restricted to short
joining length only between
various items of machinery and
the permanent piping systems
2) The flexible hoses should
positions.
3) Hose assemblies with
couplings made of carbon steel
are not to be used at
normalized.
Rem arks
Cert. N o.
11/ 10073(E1)
Other prod uction place
The Yokoham a Rubber Co., Ltd .,
N agano Plant
548 Yoshid a, Takam ori-cho,
Shim oina-gun, N agano Pref., 3993102, Japan
The Yokoham a Rubber Co., Ltd .,
Ibaraki Plant
1, H atorinishi, Om itam a City, Ibaraki
Pref., 319-0198, Japan
Yam asei Kogyo Co., Ltd .
22, Motonaruo-cho, Minam i-ku,
N agoya-city, 457-0065, Japan
Fuji Koatsu Flexible H ose Co., Ltd .
6-2-20, Shim ata, H ikari City,
Yam aguchi Pref., 743-0063, Japan
200
Type
Details of Approval
Application
Rem arks
Cert. N o.
4)
Flexible hose
assemblies constructed of nonmetallic materials intended for
installation in piping systems
for flammable media, and sea
water systems where failure
may result in flooding, are to
be of fire-resistant type.
5) “OMB” series of Non-fireresistant type can be used for
machinery and equipment
located on exposed deck or in
low fire spread spaces on deck
201
ThorSud s.p.a.,
Via M. Bellisario 54,
San Salvo (CH), 66050,
Italy.
Type
DELAWARE 30N
Details of Approval
Mand rel built tank cleaning hose d esigned for cleaning of tanks
w ith the application of rotating head . N orm ally assem bled w ith
BUTTERWORTH couplings. Due to its peculiar structure the
hose in w orking cond ition is not subject to elongation.
Application
Rem arks
Cert. N o.
For cleaning of oil and
chem ical tanks in the m arine
environm ent
15/ 20097
use for sprinkler systems and
other similar systems.
10/ 10010
systems in ships constructed
for the carriage of liquefied
gasses in bulk, and for onboard
temporally connection.
03/ 10023(E3))
Marine use for piping systems
shown as follows:
05/ 10043(E3)
Ratings:
Inner-/ Outsid e d iam eter [m m ]: 38/ 54 and 51/ 67
Working pressure [bar]: 20
Tem perature range [°C]: -30 to 95
Tianjin D onghao Flexible Hose
Technology Co., Ltd.,
Xingang N o. 5 Road,
Shuanggang Industrial Park,
Jinnan D istrict,
Tianjin 300350,
SP-A20035 &
SP-A20035.1
Tofle Co., Inc.,
886-1,,
Aza-Shiragami,,
Kaw akami,,
Hagi city,,
Yamaguchi,, 758-0141,
Japan.
MWN800001-A,
MWN800002-A,
MWN800003-A,
MWN800004-A
Metallic flexible hoses assem blies.
N om inal d iam eter (m m ): 8
Working tem perature range (°C): 0 to +35
Maxim um w orking pressure (MPa): 14.0
TF-type stainless steel flexible hoses.
N om inal size:
6A, 25A, 32A, 40A, 200A, 250A
Design pressure:
1.0 MPa
Design tem perature range (C): -163 ~ +80
IMO MSC Resolution 103(73)
TF and TFR series
Metallic flexible hoses assemblies
TFR-2000,
TF-10000,
TFR-4000,
TF-23000 &
TF-23000(Monel)
TFR-2000
N om inal size
Design pressure
Design temperature
: 3/ 8”(10A) to 2”(50A)
: 2.06 MPa ~ 4.32 MPa
: 300 ºC
[TFR-2000, TF-10000, TFR4000 & TF-23000]:
Compressed air, fresh water,
fuel oil, lubricating oil,
steam (restricted to temporary
flexible
202
Type
Details of Approval
TF-10000
N om inal size
Design pressure
Design temperature
Tofle Co., Inc. ...continued
TFR-4000
N om inal size
Design pressure
Design temperature
TF-23000
N om inal size
Design pressure
Design temperature
TF-23000(Monel)
N om inal size
Design pressure
Design temperature
SB series
(fire-resistant type)
: 2 ½”(65A) to 12”(300A)
: 0.62 MPa ~ 2.94 MPa
: 300 ºC
Rem arks
connections only)
and engine exhaust systems
Cert. N o.
05/ 10043(E3)
[TF-23000(Monel)]:
Sea water systems
: 3/ 8”(10A) to 2”(50A)
: 4.12 MPa ~ 16.2 MPa
: 300 ºC
: 3/ 4”(20A) to 12”(300A)
: 0.84 MPa ~ 4.18 MPa
: 300 ºC
: 3/ 4”(20A) to 10”(250A)
: 1.08 MPa ~ 4.18 MPa
: 300 ºC
PTFE-type Flexible hose assemblies
Ratings
N om inal size
Design pressure
Design temperature
Application
Marine use for boiler fuel oil
piping systems in ships
15/ 10011
: 3/ 8” & 1/ 2”
: 2.8 MPa
: 180 ºC
Test
Pressure test
Burst test
Impulse test
Fire-resistance test (ISO 15540)
203
Tubiflex SpA,
Strada Torino, 25,
10043 Orbassano (TO),
Italy.
Type
Details of Approval
Flexible m etal hose assem blies w ith external w ire braid ing
Parflex:
SP.M.9650
SP.M.9655
SP.M.9750
SP.M.9755
Parflex:
N om inal d iam eter (inch):
N om inal pressure (bar):
Application
For use as short joining
lengths in m arine, offshore
and ind ustrial applications
Rem arks
Cert. N o.
02/ 00098(E2)
3/ 8 to 12
-200 to 550
See specification page G10
204
Tubiflex SpA ...continu ed
Type
Details of Approval
Superflex:
SX.M.9150
SX.M.9155
Superflex:
Tubiflon:
TX.M.8850.50
TX.M.885V.50
TX.M.885S.50
TX.M.885VS.50
TX.M.8850.51
TX.M.885V.51
TX.M.885S.51
TX.M.885VS.51
N on-m etallic PTFE flexible hose
Cond uctive and non-cond uctive
AT.M.1050
SP.M.5750S.24.008
Metallic flexible hose assem blies
AT.M.1050
Working tem perature (0C):
Max. w orking pressure (bar)
SP.M.5750S.24.008
Working tem perature (0C):
Max. w orking pressure (bar)
Italy.
Marine w ater
w ashing hose
Application
Rem arks
Cert. N o.
02/ 00098(E2)
1/ 8 and 1/ 4
-200 to 550
See specification page E10
For use as short joining
lengths in m arine, offshore
and ind ustrial applications
As short joining lengths in
sprinkler system s and other
m arine applications, other
than sea w ater system s, w here
they are subject to a lim ited
num ber of m ovem ents
For w ater/ d etergent w ashing
m achines on the d eck of
tankers
02/ 00099(E3)
3/ 8 to 3
-40 to 205
See specification pages M10, M30 &
M50
5/ 16 to 5/ 8
0 to 35
5/ 16”
3/ 8”
1/ 2”
5/ 8”
140
125
100
75
04/ 00051(E2)
See certificate for approval
cond itions.
8
0 to 35
140
Tank cleaning hose 38 x 54 m m
Tank cleaning hose 51 x 67 m m
06/ 00102(E1)
Approval.
205
Tubithor SPA,
Via Caduti per la Patria, 83,
20050 Lesmo,
Milano,
Italy.
Type
Carbopom p/ M, M
IIT, M IIC, M IIN
Details of Approval
Marine fuel hoses acc. ISO 7840:2004 and SAE J 1527:2004
Application
Marine fuel hoses for sm all
craft
Rem arks
Cert. N o.
06/ 00078(E1)
206
Limited,
PO Box 15 656 N ew Lynn,
48-50 Pakiti Road,
Avondale,
Auckland,
N ew Zealand.
Type
Application
WAM Marine Fuel
Hose A1
(SAE-J1527-A1 ISO7840-A1 USCG)
Rubber hoses, reinforced with high-tensile braid and finished with
fire retardant cover (Style R1), without end fittings
Marine fuel oil hose for use in
small craft as per the scope of
the specified standards shown
below left.
09/ 10029(E1)
WAM Marine Fuel
Hose A2
(SAE-J1527-A2 ISO7840-A2 USCG)
Rubber hoses, reinforced with im bedded helical wire and hightensile braid and finished with fire retardant cover (Style R2),
without end fittings
Automotive air brake hose
09/ 10030(E1)
Flexible hose for conveying gas
09/ 10041(E3)
Working Pressure (kPa) : as per standards
Rem arks
Cert. N o.
Details of Approval
Working Pressure (kPa) : as per standards
Specified standards:
SAE J1527 Rev. MAR2004
ISO 7840 3rd edition
WAM Air Brake Hose
SAE-J1402 Type A
Automotive air brake hose consisting of an elastomeric tube, a fibre
reinforcement and elastomeric cover, without end fitings
Hose diameters (mm) : 6.3 to 16
Pressure rating (MPa) : 1.0
Temperature rating (ºC) : -40 ~ 100
SAE J1402 Type A
WAM Gas Hose
AS/ NZS 1869/ C or
BS EN 559/ Normal
Duty or ISO
3821:2008/ Normal
Duty
Hose for LP Gas, natural gas, town gas and propane gas, consisting
of a low permeability rubber tube, a polyester braided cord
reinforcement and a weather resistance rubber cover, without end
fitings
207
Type
Details of Approval
Application
Rem arks
AS/ NZS 1869/ C type:
Hose diameters (inch) : ¼” ~ ¾”
Temperature range (ºC) : -20 ~ +65
Limited ...continued
Cert. N o.
09/ 10041(E3)
BS EN 559/ Normal Duty type:
Hose diameters (inch) : ¼” ~ ¾”
ISO 3821:2008/ Normal Duty type:
Hose diameters (inch) : ¼” to ¾”
Test standards:
AS/ NZS 1869:1996, Class C
BS EN 559:2003, Normal Duty
ISO 3821:2008, Normal Duty
WAM Compressed
Air Hose ISO
2398/ 1C/ L-T
(Extrusion type) &
WAM Compressed
Air Hose ISO
2398/ 2C/ N -T
(Mandrel built)
Compressed air hose consisting of a rubber tube, textilereinforcement and rubber cover, without end fitings
Flexible hose conveying
compressed air
09/ 10057(E1)
ISO 2398/ 1C/ L-T (Extrusion type)
Hose diameters (inch) : ¼” to 2”
Temperature rating (ºC) : -40 ~ +65
ISO 2398/ 2C/ N -T (Mandrel built):
Hose diameters (inch) : ¾” to 4”
Temperature rating (ºC) : -25 ~ +70
ISO 2398: 2006 (supersedes BS 5118)
208
Limited,
P.O. Box 15312 N ew Lynn,
48-50 Patiki Road,
Avondale,
Auckland,
N ew Zealand.
Type
Details of Approval
WAM Air/ Water
Hose for
Underground Coal
Mines
AS 2660:1991 Class A
Air/ Water Hose for Underground Coal Mines consisting of a antistatic synthetic rubber compound inner tube, high strength
polyester braided cords reinforcement and anti-static fire resistant
synthetic rubber blend cover
Application
Rem arks
Cert. N o.
Fir resistant anti-static flexible
hose for conveying air and
water in underground coal
mines
11/ 10097
Fir resistant anti-static flexible
hose for conveying air and
water in underground coal
mines
11/ 10098
ship installations insid e
engine room s for essential and
non-essential services for
w ater, cooling w ater,
lubricating oil, fuel oil and
com pressed air
91/ 20248(E6)
Hose diameters (mm) : 6 to 152
Temperature rating (ºC) : N/ A
AS 2660: 1991, Class A
WAM Air/ Water
Hose for
Underground Coal
Mines
AS 2660:1991 Class A
Air/ Water Hose for Underground Coal Mines consisting of a antistatic synthetic rubber compound inner tube, high strength
polyester braided cords reinforcement and anti-static fire resistant
synthetic rubber blend cover
Hose diameters (mm) : 6 to 152
Temperature rating (ºC) : N/ A
AS 2660: 1991, Class A
Witzenmann Hamburg GmbH,
Brookstieg 23,
22145 Stapfield,
Germany.
RS 321 L12
RS 330 L12
RS 331 L12
RS 430 L12
RS 430 L22
WITH / WITH OUT
GLAS FIBRE
ISOLATION
RS 531 L12
Annularly corrugated stainless steel flexible
hoses w ith single or d ouble stainless steel w ire-braid ing.
Type RS 321 L12
Size
6
8
10
Design Pressure [bar] 100 100 65
Size
20 25 32
Design Pressure [bar]
40 40 20
Size
65 80 100
Design Pressure [bar] 16 10 6
Type RS 330 L12
Size
12
50
40
20
16
50
50
16
125 150
6
6
209
Witzenmann Hamburg GmbH
...continued
Type
Details of Approval
Type RS 331 L12
Size
Size
Size
6 8 10 12 16
150 100 100 65 65
20 25 32 40 50
40 50 25 40 25
65 80 100
25 16 10
Type RS 430 L12
Size
Size
20 25 32 40 50 65
65 50 65 40 50 25
80 100 125
16 10 10
Application
Rem arks
Cert. N o.
91/ 20248(E6)
Type RS 430 L22
Size
20 25 32 40 50 65
Design Pressure [bar] 100 100 65 65 65 50
Size
80 100 125
50 40 16
Type RS 430 L22 w ith glass fibre isolation
Size
20 25 32 40 50 65
Design Pressure [bar] 65 65 65 65 65 50
Size
80 100
Design Pressure [bar] 50 40
Type RS 531 L12
Size
6 8 10 12 16
Design Pressure [bar] 200 200 150 100 150
210
Witzenmann
Metallslangfabriken Sverige
AB,
Box 1094,
D alhemsvägen 40,
14 123 Huddinge,
Sw eden.
Type
R331/ S12
Details of Approval
Flexible m etallic hose w ith convoluted steel tube and external
stainless steel braid ing
Length (m m ):
Maxim um Working Tem perature (°C):
Working Pressure (bar):
10 to 50
176 to 1440
–50 to 100
6
Application
To accom m od ate relative
m ovem ent betw een fixed
pipew ork and purifiers in
m arine application
Rem arks
Cert. N o.
10/ 00058(E1)
211
ZEC SpA,
Via Lungolorno 11,
43052 Colorno (PR),
Italy.
Type
OL7 Series
Details of Approval
Therm oplastic flexible hoses consisting of an inner core of
therm oplastic polym er, poliéster fibre reinforcem ent and a
polyurethane outer cover, w ith end fittings:
CO2 System s:
Internal d iam eter (inch):
3/ 16 to 5/ 8
210 to 105
H yd raulic oil system s:
3/ 16 to 1
210 to 70
Application
As joint joining lengths of
perm anent pipes in CO2 fire
fighting system s, and in
hyd raulic oil system s.
Rem arks
Cert. N o.
11/ 00039(E1)
H yd raulic hoses in m arine
applications are retricted to use in
areas w here a fire safe hose is not
required .
212
Product: Rubber Compensator (Part 1A)
D ong Yang S & T,
#679 N ajun-Ri,
Saengrim-Myon,
Gimhae-Si,
Gyungham, 621-821,
Korea, Republic of.
Type
DYV-W
Details of Approval
Low convolution rubber bellow s type pipe com pensator w ith
w ire braid reinforcem ent
Marine and offshore piping
system s:
N om inal d iam eter m m )
: 25 to 250
Maxim um w orking pressure (MPa) : 1.6 (25 ~ 200 size)
1.0 (250 size)
Burst test pressure (MPa)
: 6.4 (25 ~ 200 size)
4.0 (250 size)
Service tem perature range (°C)
: +100
 Engine lubricating oil
system s
 Fresh w ater cooling
system s
Rem arks
Cert. N o.
15/ 40077(E4)
Testing stand ard s: ISO15540 & ISO 15541
Elaflex - Gummi Ehlers GmbH,
Schnackenburgallee 121,
22525 Hamburg,
Germany.
Application
ERV- Gelbstahl
(Yellow Steel)
 Fresh w ater pum ping
system s
 Ballast w ater lines in closed
d uct keels
 Engine sea w ater cooling
system s
 Dom estic salt/ fresh w ater
pum ping system s
 Air cond itioning system s
and sim ilar services
Rubber expansion joint consisting of:
Tube
: NBR (nitrile), seamless,
electrically conductive
Reinf`m ent : galvanised steel w ire cord ,
CR rubberised
Cover
: Chloroprene CR
Flanges
: carbon steel, zinc plated and
yellow chromated
+ Oil fuel, lubricating oil and
other flammable liquids
+ Sea* - and fresh water cooling
lines
+ Bilge and ballast lines in
machinery spaces and duct
keels
MAWP : 16 bar at m ax. service
tem perature of 60°C, DN 25 to DN 400
+ Cargo lines for MDO and
lubricating oil carrier
+ Cargo lines inside cargo oil
tanks of oil tankers
+ All other non- essential pipe
lines
03/ 20021(E2)
213
Type
Details of Approval
Application
Restrictions for oil fuel and lubrication oil
and other flammable liquids
Elaflex - Gummi Ehlers GmbH
...continued
Rem arks
*Where fitted in sea water lines
in machinery compartments,
guards are to be provided
which will effectively enclose,
but not interfere with the action
of the expansion joint and
which will reduce to the
minimum practicable any flow
of water in the event of failure
of the flexible element
Cert. N o.
03/ 20021(E2)
The expansion joints are to be
installed in well visible and
accessible locations and
protected against over
extension and compression and
against mechanical damage.
The adjoining pipes are to be
suitably aligned, supported,
guided and anchored.
The producer’s instructions
and recommendations are to be
considered
ERV- Gelbring
(Yellow Band)
ERV- Rotring (Red
Band)
ERV- ROTEX (Double
Red Band)
Rubber expansion joints consisting of:
Gelbring
Rotring
Tube
: NBR
Butyl/ EPDM
Reinf`ment : Nylon
Nylon
ROTEX
EPDM
Marine and offshore, viz.: Fresh
and sea* water
lines; ballast lines in machinery
spaces, duct
keels and double bottom water
ballast tanks;
03/ 20022(E2)
214
Type
Details of Approval
Poymer
Cover
Flanges
text.cord
text.cord
text.cord
: Chloroprene CR EPDM
EPDM
: Stainless steel, carbon steel, zinc plated
Or hot galvanized
Application
Rem arks
Cert. N o.
bilge lines inside duct keels
only; sanitary
discharge and cargo lines (NBR
only)
inside the cargo oil tanks of
tankers.
215
Type
Details of Approval
Gelbring: PN 16 for DN 25 to DN 350, PN 10 for DN 400 to DN
1000 at 90°C max.
Rotring : PN 16 for DN 25 to DN 350, PN 10 for DN 400 to DN
1000 at 100°C max.
ROTEX : PN 6 at 110°C max., PN 10 at 100°C max. for DN 25 to
DN 1000
Elaflex - Gummi Ehlers GmbH
...continued
Application
Rem arks
Cert. N o.
03/ 20022(E2)
The prod ucer’s instructions
and recom m end ations are to
be consid ered .
REIFLEXA-P Reischl GmbH &
Co. KG,
Am Knick 5,
22113 Oststeinbek,
Germany.
1A; 1S
in versions: ”yellow”,
“red”, “HP”, “green”
and “white”
Yellow :
T ube / Reinforcement / Cover
ECO/ Nylon text cord/ ECO or CR- Chlor.
9B
10B
Red :
EPDM/ Nylon text cord/ EPDM
1B
and sea* water lines; ballast
lines in ma-chinery spaces, duct
ballast tanks; bilge lines inside
duct keels only; sanitary discharge and cargo lines (NBR
Nitrile black only) inside the
cargo oil tanks of tankers.
03/ 20029(E2)
216
Type
Co. KG ...continued
Details of Approval
HP :
EPDM/ Polymer text cord/ EPDM
12B
Green :
Tube / Reinforcem ent / Cover
CSM-Hypalon/ Nylon text cord/ CR-Chloropr.
White :
Tube / Reinforcem ent / Cover
NBR-Nitrile white/ Nylon text cord/ CR-Chlor.
----------------Flange material on request------------Type 1 A : PN 16 for DN 32 to DN 150
PN 10 for DN 200 to DN 800
Type 1 S : PN 16 for DN 32 to DN 200
Maximum temperature: + 90°C
GS (Yellow Steel)
Rubber expansion joint consisting of:
Tube
: NBR (nitrile), seamless,
electrically conductive
Reinf`m ent : galvanised steel w ire cord ,
CR rubberised
Cover
: Chloroprene CR
Flanges
: carbon steel, zinc plated and
yellow chromated
Application
Rem arks
which will effectively en-close,
of the flexible element.
Cert. N o.
03/ 20029(E2)
against mechani-cal damage.
guided and an-chored.
and recom -m end ations are to
be consid ered .
+ Oil fuel, lubricating oil and
other
flammable liquids
+ Sea* - and fresh water cooling
lines
+ Ballast lines in machinery
spaces and duct keels
+ Bilge lines in duct keels only
03/ 20038(E3)
217
Type
Details of Approval
MAWP: 16 bar at m ax. service
Application
Rem arks
Cert. N o.
+ Cargo lines for MDO and
lubricating
oil carrier
+ Cargo lines inside cargo oil
tanks of
oil tankers
+ All other non-essential pipe
lines
218
Type
Details of Approval
Restrictions for oil fuel and lubrication oil
and other flammable liquids
Co. KG ...continued
Application
Rem arks
in ma-chinery compartments,
of the flexi-ble element.
Cert. N o.
03/ 20038(E3)
against mecha-nical damage.
The producer’s instructions
and recom-mendations are to
be considered.
Shanghai Tong Foo Rubber
Products Co. Ltd.,
2636, Hu Song Road,
Si Jing Tow n,
Song Jiang D istrict,
Shanghai, 201601,
“LINK-FLEX”
Flanged Single Sphere
Connector-Style 10R,
Style 15
Rubber Flexible Pipe Coupling
Rubber Material: CR, EPDM
Style 10R:
Diameter (mm): 32 to 500
Max. Working Pressure (MPa): 1.18 (size 32 to 300); 0.69 (size 350 to
500)
Burst test pressure (MPa):
5.9 (size 32 to 300);
3.4 (size 350 to 500)
Temperature range (˚C): -10 to +105
Marine, Offshore piping
systems as noted below:
Fresh water cooling system
Fresh water pumping system
Ballast water line in closed duct
keel
Sea water cooling systems in
machinery spaces when
encased in steel guard
15/ 80027(E3)
219
Type
Details of Approval
Style 15:
Diam eter (m m ): 32 to 500
Max. Working Pressure (MPa): 1.18 (size 32 to 300); 0.69 (size 350
to 500)
Burst test pressure (MPa):
5.9 (size 32 to 300);
3.4 (size 350 to 500)
Tem perature range (˚C): -10 to +105
Application
Rem arks
Cert. N o.
Domestic salt/ fresh water
pumping system
Air cond itioning system and
sim ilar services
220
Stenflex,
Rudolf Stender GmbH,
Robert-Koch-Strasse 17,
22851 N orderstedt,
Germany.
Type
A-1
A-2
A-3
A-4
R-1
R-2
Details of Approval
Application
Rubber compensators (bellows) made of rubber quality
EPDM/ EPDM or NBR/ CR (inner/ outer core) with synthetic fibre
reinforcement, fitted with carbon steel turnable flanges
lines in machinery spaces, duct
duct keels only; sanitary
discharge and cargo lines
(NBR/ CR only) inside the
cargo oil tanks of tankers.
Type
Size
MAWP
A-1, A-2, A-4
DN 20 to
DN 1000
A-3
DN 32 to
DN 1000
R-1, R-2
DN 32 to
DN 300
10 bar at m ax. service tem perature of 80°C
Marking EPDM/ EPDM= orange (not oil resistant )
N BR/ CR = red
Rem arks
Cert. N o.
93/ 20006(E4)
and recom m end ations are to
be consid ered
221
Type
AS-1
AS-2
AS-3
AS-4
RS-1
RS-2
Details of Approval
Rubber compensator made from rubber quality EPDM or NBR
with integral wire braid reinforcement, with carbon steel turnable
flanges with or without tie rod, fire resistant
Application
lines in machinery spaces, duct
duct keels only;
Rem arks
Cert. N o.
93/ 20007(E4)
222
Type
Details of Approval
Stenflex ...continued
Type
Size
MAWP
AS-1, AS-2, AS-3, AS-4
RS-1, RS-2
DN 25 to DN 400
DN 32 to DN 300
Restrictions for flam m able liquid s insid e
m achinery spaces of Category A :
Max. service tem perature of 90°C,
DN 25 to DN 300
Marking EPDM/ EPDM= orange (not oil resistant )
N BR/ CR = red
Application
sanitary discharge and cargo
lines (NBR/ CR only) inside the
cargo oil tanks of tankers and
pipe lines containing
flammableliquids (NBR/ CR
only).
Rem arks
Cert. N o.
93/ 20007(E4)
guided and anchored. The
prod ucer’s instructions and
recom m end ations are to be
consid ered
223
Subject: Hydraulic/Pneumatic Systems
Product: Accumulators (Part 1A)
Pow erstart (Pty) Ltd,
27, Bushbuck Close,
Corporate Park South,
1683 Midrand,
South Africa.
Type
SC
Details of Approval
H yd raulic accum ulators of fabricated carbon steel:
Sizes:
A010SC, A025SC,
A040SC, A055SC,
A075SC, A100SC
A120SC & A160SC
Working pressure m axim um (MPa);
Steering Gears:
H yd raulic system s:
Tem perature Range:
Application
Marine, offshore, ind ustrial
and m ining use in hyd raulic
system s and steering gears.
Rem arks
Cert. N o.
93/ 00020(E5)
20
25
– 40° to 100°C
224
Product: Actuator (Part 1A)
Emerson Process Management
- Valve Automation,
19200 N W Freew ay,
Houston,
Texas 77065,
(USA).
Type
Details of Approval
GC01, GC2, GC3,
GC4, GC5, GC7, GC8
& GC10
Quarter turn, canted/ standard scotch yoke & hydraulic/
pnuematic actuators- double acting or spring return
GC Hydraulic - Spring Return ( SR) or Double Acting ( DA)
Operating Pressure 500 to 5000 psig
Torque output hydraulic DA - 1259 to 3544170 in-lbs
Torque output spring return (SR) - 5672 to 2286935
*Series GC1 to GC5
actuators only at
China
GH2, GH3, GH4,
GH5, GH7, GH8 &
GH10
Application
Fixed or mobile offshore use.
To drive quarter turn valves to
open or closed position using
air or hydraulicpressure in both
directions ( double acting)
or air or hydraylic pressure in
one direction (spring return)
Rem arks
Cert. N o.
04/ 60004(E2)
approval.
GC Pneumatic - Spring Return ( SR) or Double Acting ( DA)
Torque output pneumatic DA- 4196 to 3591347 in-lbs
Torque output pneumatic SR- 5672 to 2753007 in-lbs
GH Pneumatic - Spring Return ( SR)
Torque output pneumatic 7772 to 3726658 in-lbs
Spring Torque
10318 to 1705468 in-lbs
GHC2, GHC3,
GHC4, GHC5,
GHC7, GHC8
GHC 10
&
GHC Pneumatic - Spring Return ( SR)
Torque output pneumatic 7253 to 1765791 in-lbs
Spring output
10231 to 779636 in-lbs
Temperature rating
Standard Minus 20 to 200 deg F
High
0 to 350 deg F
Low
Minus 40 to150 deg F
225
Type
FH C5, FH C6, FH C7,
FH C9
Details of Approval
Quarter turn canted / stand ard yoke, hyd raulic/ pneum atic,
d ouble acting or spring return
FH C Pneum atic - Spring Return or Double Acting
Maxim um Operating pressure, 40 to 180 psig
Torque output pneum atic d ouble acting, 25454 to 1323117 lb -in
Torque output spring-return type,10301 to 1358484 lb-in
Application
Fixed or m obile offshore use.
To d rive quarter turn valves
to open or closed position
using air/ hyd raulic in both
d irections ( d ouble acting) or
air/ hyd raulic in one d irection
(spring return)
Rem arks
Cert. N o.
07/ 60002(E2)
approval.
226
Type
Details of Approval
Application
Rem arks
FH C H yd raulic - Spring Return or Double Acting
Operating pressure, 400 to 3900 psig
Torque output hyd raulic d ouble acting, 8891 to 1358019 lb-in
Torque output spring-return, 10002 to 1357880 lb-in
FH Pneum atic - Spring Return or Double Acting
Maxim um Operating pressure, 40 to 200 psig
Torque output spring-return, 11640 to 1356395 lb-in
Torque output hyd raulic d ouble acting 8891 to 1355047 lb-in
- Valve Automation
...continued
FH 5, FH 6, FH 7,
FH 9
Cert. N o.
07/ 60002(E2)
FH H yd raulic - Spring Return or Double Acting
Operating pressure, 400 to 3900 psig
Torque output pneum atic d ouble acting, 25847 to 1347708 lb -in
Torque output spring-return type, 11640 to 1352986 lb-in
Refer to Manufacturer’s table for the rating for the specific
actuator.
Tem perature rating
Stand ard
Minus 20 to 200 Deg. F
H igh
0 to 350 Deg. F
Low
Minus 40 to 150 Deg. F
Extrem e Low
Miuns 65 to 150 Deg F
Quarter turn scotch yoke pneum atic or hyd raulic actuators w ith
spring return or d ouble acting.
Mod el size:
01, 2, 3, 4, 5, 7, 8, 10 & 13
Tem perature Range (°C)
-40 to 177
Fixed and m obile offshore use.
from full one sid e to a fail safe
fully the other sid e position.
Expires: 05 Feb 2018
96/ 60075(E7)
Refer to certificate for cond itions.
227
Type
Details of Approval
Pneum atic Actuator
Operating pressure (psi):
H yd raulic Actuator
Operating Pressure (psi):
Application
Rem arks
Cert. N o.
40-200
500-5000
Maxim um Output Torque (lb.in)
Double-acting
Spring return
G01 Pneum atic/
H yd raulic
G2 Pneum atic/
H yd raulic
40,500
40,500
60.000
59,300
228
- Valve Automation
...continued
Heinzmann GmbH & Co KG,
Am Haselbach 1,
79677 Schönau (Schw arzw ald),
Germany.
Type
Details of Approval
G3 Pneum atic/
H yd raulic
105,000
78,300
G4 Pneum atic/
H yd raulic
210,000
161,300
G5 Pneum atic/
H yd raulic
480,000
386,000
G7 Pneum atic/
H yd raulic
930,000
743,600
G8 Pneum atic/
H yd raulic
1,500,000
1,146,400
G10 Pneum atic/
H yd raulic
3,000,000
2,433,000
G13 Pneum atic/
H yd raulic
6,000,000
4,917,869
Electronic Actuator
w ith brushless d isc
m otor
Type:
StG EC 40,
StG EC 40 RSCW(CCW),
StG EC 250
Application
Rem arks
Cert. N o.
96/ 60075(E7)
Refer to m anufacturer's Literature.
EN V2,
EN V3
and
EN V4
(2013)
14/ 20064
Type Approval of prod ucts accord ing
to Test Specification N o. 1 (2013) is
essentially for hard w are.
For installation in "General
Pow er Distribution Zones"
229
Type
Softw are Version:
xx.11.01
(xx – refers to
ind ivid ual custom er)
Details of Approval
Application
Ingress protection rating:
IP67
Low Tem perature test:
-40°C for 16 hours
Salt mist test according
IEC 60068-2-52 Test Kb
severity 1
Rem arks
Cert. N o.
Exam ination of softw are aspects is
restricted to functional operation as
d em onstrated in the Perform ance
Test.
The requirem ents of the Lloyd 's
Register (LR) Rules apply w hen the
equipm ent is
230
Type
Details of Approval
Heinzmann GmbH & Co KG
...continued
Application
Manufacturer's Specification
KSB Seil Co Ltd,
1597-3, Songjeong,
Gangseo-gu,
Busan,
Korea, Republic of.
H Q10, H Q25, H Q50,
H Q100, H Q200,
H Q400, H Q800 and
H Q1600
Double acting, hyd raulic actuators to d rive quarter turn valves.
M-System Co., Ltd.,
5-2-55 Minamitsumori,,
N ishinari-ku,
Osaka, 557-0063,
Japan.
Electronic Actuator
PRP - *
14/ 20064
EN V2,
EN V3
and
EN V4
(2013)
14/ 20067
ind ustrial use.
Servo-Top II,
PRP Series
Maxim um output torque (N -m )
: 219 to 31586
Maxim um w orking pressure (bar) : 160
*- * *
[1] [2] - [3] [4]
Cert. N o.
installed on LR Classed vessels and
offshore installations.
Shock test accord ing IEC
60068-2-27:2008, 3 shocks at
each d irection w ith 300 m / s³
Single Actuator units
used for auxiliary
functions on
com bustion engines
Type:
StG 2010
StG 2040
StG 2080
Rem arks
The requirem ents of the Lloyd 's
Register (LR) Rules apply w hen the
equipm ent is installed on LR Classed
vessels and offshore installations.
04/ 10020(E3)
EN V 3
(2002)
in the “General Pow er
Distribution Zones”
12/ 10061
ADDITION AL TEST
Low Tem perature Test : -20°C, 16
hours
231
Type
Details of Approval
[1] : Torque, Operation Tim e
00
: 100 N • m , 8.5 to 125 sec /
01
: 100 N • m , 8.5 to 125 sec /
(original setting 12 sec/ 90°)
03
: 100 N • m , 8.5 to 125 sec /
10
: 200 N • m , 16 to 125 sec /
11
: 200 N • m , 16 to 125 sec /
13
: 200 N • m , 16 to 125 sec /
90°
90°
90°
90°
90°
90°
Application
Rem arks
Cert. N o.
DESIGN CODE
Manufacturer’s Specification
N o. ES-4823-LLOYD2012 Rev.2
OPERATION AL LIMITATION S
Operational Duty Tim e Ratio :
10% Max., @-20 to 70°C
RATIN GS
100 – 120 V or 200 – 240 V
A.C., 50/ 60H z
232
Type
Details of Approval
NS PAC-92 series
PAC-92-01 to
PAC-92-11
Quarter turn, d ouble acting, hyd raulic valve actuator
N S PAC-80U Series
PAC-80U-01 to
PAC-80U-10
Quarter turn, d ouble acting, hyd raulic valve actuator.
Mom ent arm
35 – 135 m m
Design Pressure
98.1 bar
Max Torque Rating 475.5 – 29,350 N m
N S PAC-80Z Series
PAC-80Z-01 to
PAC-80Z-10
Quarter turn, d ouble acting, hyd raulic valve actuator.
Mom ent arm
35 – 135 m m
Design Pressure
137.3 bar
Max Torque Rating 665.3 – 41,060 N m
N avalimpianti S.p.A.,
Salita Guardia 60 A,
16014 Ceranesi (GE),
Genova,
Italy.
TORKLT 30, 40, 50,
60, 70 & 90
H yd raulic valve actuators:
Woodw ard Inc.,
1000 East D rake Road,
Fort Collins,
Colorado, 80525-1800,
(USA).
Electric Actuators and
Drivers
N akakita Seisakusho Co. Ltd.,
1-1 Fukono, minami-machi,
D aito City,
Osaka, 574-8691,
Japan.
Moment arm
Design pressure
Maximum torque rating
: 35 to 150 mm
: 137.3 bar
: 665 to 28,180 kNm
Working pressare (bar):
Design pressare (bar):
H yd raulic test pressare (bar):
Piston d iam eter (m m ):
Torque (N m ):
Type: EM-80 / EM300
Pow er Supply Requirem ents:
Voltage: 440VAC 3PH
Frequency: 50-60H z
Auxiliary Supply Requirem ents:
Voltage: 24VDC
<160
160
240 (320 Max.)
30 to 90
213 to 5660
Application
Rem arks
Cert. N o.
Marine use.
from full one sid e to a fail-safe
fully they other sid e position .
95/ 10027(E4)
Marine use. To d rive quarter
turn valves from full one sid e
to a fail-safe fully the other
sid e position
Expires: 9 May 2016
96/ 10019(E5)
ind ustrial use for the
operation of rem ote valves
05/ 00018(E1)
EM80/ 300 Driver: EN V2
EM80/ 300 Actuator: EN V4
(2002)
Installation of this equipm ent for
m arine applications is to be in
accord ance w ith current Lloyd ’s
Register Rules and Regulations
14/ 60027
233
Woodw ard Inc. ...continued
Type
Details of Approval
Application
Rem arks
Baum uller Drivers
and Softw are
8701-1063
8701-1064
8701-1066
8701-1068
8701-1069
8701-1070
8701-1071
Installation of this equipm ent for
m arine applications is to be in
accord ance w ith current Lloyd ’s
Register Rules and Regulations.
Stober Drivers and
Softw are
8701-1570
8701-1571
8701-1572
Softw are review is lim ited to the
functionality of the prod uct d uring
testing.
Cert. N o.
14/ 60027
A pow er line filter P/ N 1326-1125
Rev. N EW is required to be installed
in ground ed pow er netw orks.
Rad iated and cond ucted em issions
m eet the requirem ent for equipm ent
in general pow er d istribution zones.
Baum uller Actuators
Part N o.
8256-108
8256-109
8256-110
234
Subject: Lifting Appliances & Materials Handling
Product: Anchor Windlass (Part 1A)
Hypac Pty Ltd.,
Units 3 and 4,
2 Hew er Street,
Hampstead Gardens,
South Australia, 5086,
Australia.
Type
HHAW1500 Series
Details of Approval
H yd raulic Anchor Wind lass
Mod el: H H AW1516A000
Maxim um d esign torque: 27.52 kN m
Chain d iam eter/ Grad e: 17.5 m m / U2
Winch d rum : Solid Alum inium (OD=203.2 m m )
Drum capacity: 100 m steel cable w ith 20 m m d iam eter
Application
Rem arks
Cert. N o.
Hydraulic anchor windlass,
with cable stopper, for anchor
handling on small craft
13/ 10090(E1)
Vertical anchor w ind lass, w ith
chain stopper, for anchor
hand ling on sm all craft
12/ 00001
Mod el: H H AW1532A000
Maxim um d esign torque: 27.52 kN m
Chain d iam eter/ Grad e: 17.5 m m / U2
Winch d rum : Solid Alum inium (OD=203.2 m m )
Drum capacity: 150 m steel cable w ith 20 m m d iam eter
Muir Engineering Pty Ltd,
100 Brow ns Road,
Kingston,
7050 Tasmania,
Australia.
VRC 4500
Verical anchor w ind lass:
Safe w orking load (kg):
12.5m m chain cable:
Winching speed (m / m in):
663
833
1087
9
235
Product: Man-rider/General Purpose Winch (Part 1A)
Jebsen & Jebsen Offshore
Equipment PTE Ltd,
11 Tuas Crescent Singapore,
638705,
Singapore.
Type
ME-HHW-SD-06B09MR
Details of Approval
Ratings
Safe Working Load (SWL) :
Man rid ing
Cargo hoist
Brake capacity
Drum capacity
:
:
:
:
2 tonne x 50 m/ min
6 tonnes x 15m/ min
9 tonne Static, Fail-Safe
9 tonne Static (SWR, 4 Layers)
Application
Rem arks
Cert. N o.
Offshore pedestal cranes, built
to the below mentioned codes,
and suitable for cargo and
man-riding applications
See certificate for other conditions
12/ 10077
use for m an-rid ing puroposes.
10/ 00045
13/ 10010
Design codes/ Standard
Lloyd’s Register (LR) Code for Lifting Appliance in a Marine
Environment, August 2009
API SPECIFICATION 2C: Specification for Offshore Pedestal
Mounted Cranes, 6th Edition
Thern Lifting Services,
Bourtie Industrial Park,
Inverurie,
Aberdeen, AB51 0HL,
Monitor 75/ 150
Tianjin Redscrew Pumps
Manufacture & Technology
Co., Ltd,
N o. 2 Huake Er Road,,
Hatai Huayuan Technical Park,
Tianjin, 300384,
2HM series,
2HE series,
2VM series &
2HC series
Self contained electro/ hyd raulic personnel w inch:
Safe w orking load (Kg):
Rope d iam eter (m m ):
H oisting speed (m / m in):
150
10
26
Ratings
2H M, 2H E & 2VM series
Rated pressure:
0 ~ 2.4 MPa
Rated Capacity:
0 ~ 2500 m3/ h
Fluid viscosity:
1 ~ 1500 mm2/ s
Rated Speed :
750 ~ 1800 rpm
2H C series
Rated pressure:
Rated Capacity:
Fluid viscosity:
Rated Speed :
Refere to certificate for
cond itions of approval.
Marine pumping and piping
systems
See certificate for other conditions.
0 ~ 1.2 MPa
0 ~ 900 mm 3/ h
1 ~ 1500 mm 2/ s
750 ~ 1800 rpm
JB/ T 8091-1998 Testing Methods for Screw Pump
236
Product: Slings and Accessories (Part 1A)
Type
CJSC "N ew Technology in
Transportation",
Maly Gnezdnikovskiy per 12/4,
125009 Moscow ,
Russia.
MK-14-10
Interlashing S.R.L.,
Via Savona 1/11,
16129 Genoa,
Italy.
Signod e USLM
System
Details of Approval
Application
Interm ed iate flexible container:
Diam eter (m ):
N om inal capacity (m 3):
Lifting capacity (Te):
Max. stacking height:
2.4
10
14
4
Lashing system com poned of a steel band secured by tw o
crim ped seals:
Steel band :
Type:
Wid th (m m ):
Thickness (m m ):
Min. breaking load (N ):
Av. breaking load (N ):
USLM Magnus
31.75
1.12
37,000
41,000
Sealed joint:
Min. breaking load (N ):
Band tension (Kg):
36,500
2,000
Seals:
Type:
Micro grip seals
117-H DG-OF
35.56
74.60
1.07
Insid e w id th (m m ):
Length (m m ):
Thickness (m m ):
Tensioning tool:
Sealing tool:
Rem arks
Cert. N o.
Flexible container for the
transportation and storage of
d ry cargos.
07/ 00005(E1)
Lashing system to secure steel
cargo.
04/ 00041(E3)
Tensioning and crim ping to be carried
out using m anufacturer’s specified
tools.
H N 1-114
N -1444-50LSH or N SP-1444-50
237
LTI Steel Wire Rope
(Shanghai) Co Ltd,
N o. 233 Taigu Road,
Waigaoqiao Free Trade Zone,
Pudong D istrict,
Shanghai,
Type
Class 35(W) x 7
Class 8 x 19
Details of Approval
Steel wire rope slings with either swaged ends, or resin cast open or
closed socket end terminations:
Application
Lifting operations in m arine,
applications.
Rem arks
Cert. N o.
11/ 00047
Class 35(W) x 7 w ith sw aged ferrule termination:
28, 29, 30, 31, 32, 36, 37, 38, 39 & 40
128.49 to 262.26
Class 35(W) x 7 w ith resin cast socket terminations:
27, 28, 29, 30, 37, 38 & 39
132.74 to 299.20
238
Type
LTI Steel Wire Rope
(Shanghai) Co Ltd ...continued
Details of Approval
Application
Rem arks
Cert. N o.
11/ 00047
Class 8 x 19 with swaged ferrule termination:
Rope diameter (mm):
24, 25, 26, 32, 33, 34, 35 & 36
Safe working load (kN):
90.83 to 204.30
Class 8 x 19 with resin cast socket termination:
Rope diameter (mm):
23, 24, 25, 26, 31, 32, 33, 34, 35 & 36
Safe working load (kN):
92.70 to 227.00
Millfield Enterprises
(Manufacturing) Ltd,
Shelley Road,
N ew burn Industrial Estate,
N ew burn,
N ew castle upon Tyne, N E15
9RT,
Wirelock
Resin socketing system for w ire rope term inations and slings:
Wirelock:
Term ination efficiency (%):
Flem ish Lock®
Term ination efficiency (%):
05/ 00107(E2)
Term ination of cable laid w ire
rope slings for m arine,
offshore and ind ustrial uses.
05/ 00108(E3)
6 to 154
100
Maklock resin system (a high volum e variant of the Wirelock
system ) for Flem ish-Lock® term inations of cable laid w ire rope
slings:
Unit rope:
Cable laid rope:
Term ination of w ire ropes for
ind ustrial uses.
6 to 154
77 to 559
100 % of calculated sling
breaking load
Term inal Efficiency is based upon the results of w itnessed tests
carried out, and is applicable w here the Calculated Breaking
Load of prod ucts, m ad e in the sam e m anner, com prises the sum
of the breaking load s of the com ponent ropes, less a 15%
spinning loss.
239
Ropeblock BV,
Kampenstraat 1 - 7575 ER,
PO Box 391,
7570AJ Oldenzaal,
N etherlands, The.
Type
OSS 196 to 155;
CSS 296 to 245;
SBS 517 to 533
Details of Approval
Wire rope end fittings:
OSS:
CSS:
SBS:
Open spelter sockets w ith pin or bolt;
Closed spelter sockets;
Short bow sockets.
Application
Rem arks
Cert. N o.
As end fittings for w ire rope
slings, for use in m arine,
offshore and ind ustrial lifting
applications.
11/ 00041(E1)
Lifting operations in m arine,
offshore or ind ustrial
applications
05/ 00109(E2)
For Marine, Offshore and Oil
Industry classed or intended
for Classification with Lloyd`s
Register.
01/ 20046(E2)
Refer to Ropeblock BV Prod uct Inform ation booklet and d ata
sheets for Minim um Breaking Load (MBL) and rope d iam eter for
each end fitting.
Shanghai Zhenshen Metal
Products Co Ltd,
Room 3501, Plaza 66,
N o. 1266 N anjing Road West,
Shanghai, 200040,
ZS RK 11
ZS RK 12
ZS RK 13
Tecklenborg, Kegel GmbH,
Herw igstraße 36,
D -27572 Bremerhaven,
Germany.
Wire Rope Slings : P,
PF, S, PKF, PFKF,
SKF, EP, EG.
Steel w ire rope slings w ith either alum inium alloy ferrules, hand
spliced end term inations, or socketed end s:
SWL (kN ):
AL-alloy ferrules:
Sliced eye:
Socketed end :
16, 34 & 56
31 to 277
22.5 to 215.6
31 to 277
Steel wire rope slings for lifting purposes (dia.: 8 mm to 60 mm)
and high alloy anchor and chain shackles (dia.: 3/ 16” to 4”). Safe
working loads as per DIN and US- Spec. Standards
Anchor Shackles :
Class 2 Screw Pin- ,
Class 3 Safety- .
Chain Shackles : Class
2 Screw Pin- , Class 3
Safety- .
240
Unitel Holding B.V. (UTX),
P.O. Box 7,
3295 ZG Scherpenzeel,
N etherlands, The.
Type
Webbing Slings and
Round Slings of
man made fibres.
Details of Approval
Webbing Slings:MC & MCEE 1 u/ i 12 Tonnes
MCED & TDQ 1 u/ i 24 Tonnes
MC/ 3 1,5 u/ i 18 Tonnes
Round Slings:TE & DT 1 u/ i 10 Tonnes
TLX 1 u/ i 100 Tonnes
Application
Rem arks
See Certificate and Design Appraisal
Docum ent for other cond itions
Cert. N o.
10/ 30004
241
Product: Winch and Hoist Gearbox (Part 1A)
Type
Brevini Pow er Transmission,
15 South Hope Avenue,,
224007 Yancheng Economic
D evelopment Zone,,
Yancheng City,,
Jiangsu Province,,
RX21-12/ CF-D
Tw in D isc Incorporated,
4600 21st Street,
Racine,
WI, 53405,
(USA).
MG-5225DC & MGX5225DC
Details of Approval
Application
Planetary Drive Gearbox
Marine Reverse Reduction Gearbox
Rem arks
Lifting Mechanism s, in
accord ance w ith the
Cond itions of Approval listed
in LR Design Appraisal
Docum ents
N os..EN G17053081, issue 2,
d ated 02/ 09/ 14.
General marine propulsion.
Cert. N o.
14/ 00068
See Certificate for Other Cond itions
14/ 00013
Duty
Gearbox Type
Reduction
Ratio
4.03:1
4.59:1
5.04:1
5.57:1
6.10:1
General Marine Propulsion
MG-5225DC & MGX-5225DC
Intermediate Duty
Medium Duty
1800
2100
1600
1800
RPM
RPM
RPM
RPM
727 kW
858 kW
644 kW
724 kW
727 kW
858 kW
644 kW
724 kW
727 kW
858 kW
644 kW
724 kW
727 kW
858 kW
644 kW
724 kW
727 kW
858 kW
644 kW
724 kW
Continuous Duty
1600
1800
RPM
RPM
633 kW 716 kW
633 kW 716 kW
633 kW 716 kW
633 kW 716 kW
633 kW 716 kW
242
ZOLLERN Vertriebs GmbH
+Co. KG,
Heustrasse 1,
D -88518 Herbertingen,
Germany.
Type
Details of Approval
Application
Rem arks
Gearbox ZHP
Winch EG 4.13 to 4.40
Ratio Output Stage
Torque
4.333:1
2,400,000
Nom. Torque
(Nm)
1,900 to 1,8000,000
Freefall Winch EG 6.15 to 6.36
Ratio Output Stage
Nom. Torque
Torque
(Nm)
4.333:1
2,300 to 388,000
621,000
Max.
Cert. N o.
04/ 20025(E2)
Winch, Freefall Winch, Slewing
and Planetary Gears
(Nm)
3,000 to
Max.
(Nm)
2,800 to
243
ZOLLERN Vertriebs GmbH
+Co. KG ...continued
Type
Details of Approval
Application
Rem arks
Cert. N o.
04/ 20025(E2)
Slewing/ Planetary DW 3.13 to 3.40 and PG 5.13 to 5.40
Ratio Output Stage
Nom. Torque
Max.
Torque
(Nm)
(Nm)
4.333:1
1,900 to 1,800,000
3,000 to
2,400,000
Slewing/ Planetary DW 3.13 to 3.34 and PG5.13 to 5.34
Ratio Output Stage
Nom. Torque
Max.
Torque
(Nm)
(Nm)
5.000:1
1,870 to 300,000
2,800 to
450,000
Planetary – Industrial Application PG 5.15 to 5.40
Ratio Output Stage
Nom. Torque
Torque
(Nm)
5.000:1
1,700 to 600,000
Max.
(Nm)
-
244
Subject: Main and Auxiliary Propulsion
Product: Bulkhead Seals (Part 1A)
Type
Details of Approval
Application
Rem arks
Cert. N o.
Allw eiler GmbH,
Allw eilerstraße 1,
78315 Radolfzell,
Germany.
SW 38.450
SW 48.530
SW 55.530
SW 70.595
SW-01 28.450.38
SW-01 38.450.38
SW-01 48.530.48
SW-01 55.530.55
SW-01 70.595.70
Gastight oil filled steel bulkhead - or d eck penetration shaft w ith
roller bearings on both end s and shaft seals on either sid e of the
bearings. N atural oil circulation by installation of head er tank.
As gastight bulkhead - and
d eck-penetration for
separation of engine- and
pum p-room s in ships and
or intend ed for classification
w ith this Society.
92/ 20012(E5)
CEN TA Transmissions Far East
Pte Ltd,
N o. 76 Tuas South Ave. 2,
637519,
Singapore.
CENTA Compact
Seal
Split type bulkhead seals
Bulkhead seals for m arine
propulsion shaft lines
09/ 10080 (E1)
EagleBurgmann Espey GmbH,
Thomas-Edison-Str.19,
Moers, 47445,
Germany.
ESPEY WDK-BHS
Bulkhead shaft seal, consisting of a radially split housing made of
stainless steel with segmented sealing elements of carbon-PTFE
with circumferential spring.
Watertight shaft seal for
rotating shafts penetrating
bulkheads
on board of ships classed or
Lloyd’s Register.
13/ 20054
Ratings:
Other Conditions:
Shaft diameter range: 40 – 800 mm
Operating pressure: 3 bar eff.
Shaft sliding velocity: 40 m/ s
Radial play shaft: max. 5 mm
Shaft angular misalignment: max. 2°
are to be sought.
Shaft d iam eter (m m ) : 50 ~ 600
Specified m axim um leakage rate (litre/ m in) : 0.225 ~ 1.33
Verified leakage rates:
Shaft diameter up to 100 mm: max. 0,195 L / min.
as tested,
Shaft diameter up to 320 mm: max. 0,885 L / min.
as tested,
Shaft diameter up to 800 mm: max. 2,385 L / min. calculated value
245
Mide Technology Corp,
200 Boston Avenue,
Suite 1000,
Medford MA, 02155,
(USA).
Type
Om ni Series
Reliant Series YM &
RM
Details of Approval
Bulkhead shaft seals w ith d ry running gap, hyd rofoam activated
seal rings and split housing
Designation
Sealing Ring
Om ni Series
H yd rogel Foam
With Lip Seal
Shaft Diam eter
50 – 1000m m
Shaft Surface Speed *25m / s
Max Op. Pressure 2 bar
Max. m ovem ent
10m m
Max Misalignm ent 0.5 d egrees
Application
Rem arks
Cert. N o.
Watertight bulkhead seal to
seal rotating shafts
penetrating bulkhead s
12/ 60005
Reliant Series
H yd rogel Foam
With Lip Seal
100 – 1000m m
25m / s
2 bar
50m m
0.5 d egrees
* w hen seal is activated
ProfiSeal GmbH,
Mühlerstraße 13,
55288 Schornsheim,
Germany.
ProfiSeal Bulkhead
Seals
10.400.XXX.XXXX
For shaft diameters
50 mm to 400 mm
Bulkhead Seal with dry running gap -seal rings and split
housings
Watertight bulkhead seal to
seal rotating shafts going
through bulkheads on Lloyd’s
Register classed ships, as well
as for yachts and special service
crafts.
04/ 20036(E2)
SKF Marine GmbH,
Hermann-Blohm-Straße 5,
20457 Hamburg,
Germany.
CEN TRAX
Watertight bulkhead shaft seal, axially split aluminium or
bronze housing mounted on the bulkhead opening,
for the aluminium version optional with split steel flange ring,
Sealing by segmented carbon rings,
As shaft bulkhead seals
requiring watertightness.
01/ 20025(E2)
As gas- and watertight
bulkhead shaft seals for normal
and hazardous areas on board
of ships classed or intended for
classification with Lloyd’s
Register.
12/ 20005
size 60 to 800 for shaft diameter 50 m m to 800 mm.
SIMPLEX COMPACT
2000 Gas-Tight
Bulkhead Seal
Gastight bulkhead shaft seal consisting of stationary casing of cast
iron or bronze with Perbunan-S or Viton sealing rings mounted
with a flange ring to the bulkhead opening and rotating liner with
clamp ring on the shaft.
Oil is circulating during shaft rotation through the barrier chamber,
connecting pipes and the bulkhead seal tank which is fitted with a
level switch.
246
Type
Details of Approval
Spark proof version with chrome steel liner, bronze housing rings
and seal temperature sensor.
Application
Rem arks
Cert. N o.
Other Conditions:
For the selection, installation
and maintenance of bulkhead
seal the manufacturer’s
recommendations and
instructions are to be sought.
247
SKF Marine GmbH ...continued
Type
Details of Approval
Ratings:
1) non-split type ZBS,
Size 125 to 1250, shaft dia. 80 to 1176 mm
2) split type EZBS, FZBS, GZBS
Size 140 to 1000, shaft dia. 90 to 950 mm
Z – with circulator and oil tank,
E - fully split,
F - split liner only,
G - split housing only
Application
The lubrication oil tank is to be
arranged outside the cargo
pump room or gas
contaminated space.
The flange ring is to be fitted by
studs or tap bolts to the
bulkhead, but not by bolts
passing through clearing holes
Rem arks
Cert. N o.
12/ 20005
248
Product: D iesel Engines (Part 1A)
AB Volvo Penta,
40508 Gothenburg,
Sw eden.
Type
D7A T
D7A TA
D7A-B TA
D7C TA
D7C-B TA
Details of Approval
Four stroke, turbocharged and intercooled , trunk piston, In -Linetype internal com bustion engine
Propulsion and Auxiliary / Emergency
Max. continuous power rating :
D 7A T
D7A TA
145 kW at 2300 rpm
174 kW at 2300 rpm
134 kW at 2100 rpm
162 kW at 2100 rpm
126 kW at 1900 rpm
153 kW at 1900 rpm
123 kW at 1800 rpm
149 kW at 1800 rpm
111 kW at 1500 rpm
134 kW at 1500 rpm
18B
Application
As prime and auxiliary drives
on ships and offshore
installation classed or intended for classification with
Lloyd’s Register.
Rem arks
Cert. N o.
03/ 20006(E4)
19B
D 7A-B TA
174/ 148 kW at 2300 rpm
153/ 130 kW at 1900 rpm
D 7C TA
D 7C-B TA
195 kW at 2300 rpm
195/ 166 kW at 2300 rpm
182 kW at 2100 rpm
182 kW at 2100 rpm
169 kW at 1900 rpm
169/ 146 kW at 1900 rpm
163 kW at 1800 rpm
142 kW at 1500 rpm
A uxiliary / Emergency
D 7A T
D 7A TA
128 kW at 1800 rpm
155 kW at 1800 rpm
122 kW at 1500 rpm
146 kW at 1500 rpm
20B
D 7A-B TA
148 kW at 1800 rpm
139 kW at 1500 rpm
21B
249
Type
D5A T
D5A TA
D5A-B TA
Details of Approval
Propulsion and Auxiliary/Emergency
D5A T
D5A TA
95 kW at 2300 rpm
118 kW at 2300 rpm
89 kW at 2100 rpm
110 kW at 2100 rpm
83 kW at 1900 rpm
103 kW at 1900 rpm
81 kW at 1800 rpm
100 kW at 1800 rpm
74 kW at 1500 rpm
91 kW at 1500 rpm
Application
Rem arks
Cert. N o.
installation classed or intended for classification with
Lloyd’s Register.
2B
250
Type
AB Volvo Penta ...continued
Details of Approval
Application
Rem arks
Cert. N o.
03/ 20006(E4)
D5A-B TA
118/ 102 kW at 2300 rpm
103/ 89 kW at 1900 rpm
A uxiliary/ Emergency
D5A T
D5A TA
85 kW at 1800 rpm
105 kW at 1800 rpm
81 kW at 1500 rpm
97 kW at 1500 rpm
23B
D5A-B TA
100 kW at 1800 rpm
92 kW at 1500 rpm
24B
D16
Four Stroke, In Line Type, Turbo Charged Marine Diesel Engine.
Duty
Pow er(kW):
Speed (rpm ):
Max.Firing Pressue(bar):
M.I.P(bar):
Bergen Engines AS,
PO Box 329 Sentrum,
N -5804 Bergen,
N orw ay.
B33-45L6
Main
478
1800
165
23.2
551
1900
177
25.4
06/ 00039(E1)
Main propulsion.
15/ 00069
Aux
450
500
1500
1800
169
176
26.2
24.4
Four stroke internal combustion engine:
N um ber of cylind ers 4 SCSA:
Maxim um continuous pow er rating (kW/ cyl):
Speed (rpm ):
Maxim um firing pressure (bar):
Mean ind icated pressure (bar):
Main, Auxiliary & Em ergency
Marine Propulsion
6
600
750
225
27.0
251
Caterpillar Inc,
Marine Center of Excellence
(MCOE),
107 South Chase Boulevard,
Fountain Inn,
South Carolina, 29644,
(USA).
Type
C32/ C32 Acert
Details of Approval
Application
Tw elve cylind er, V-bank four stroke internal com bustion engine.
A pplication
Power
(kW)
1288
1044
970
709
25B
26B
M ain
Propulsion
27B
28B
29B
30B
Speed
(rpm)
2300
2100
1800
1600
Peak Press
(bar)
152
140
143.64
135.44
MIP
(bar)
23.23
20.78
22.13
18.34
Marine propulsion and
auxiliary d rive
Rem arks
Cert. N o.
05/ 00033(E3)
§ Interm ittent Rating
The interm ittent rating has
also been accepted in specific
instances, provid ed
Caterpillar’s operating
requirem ents are fully
com plied w ith
252
Type
Details of Approval
Main
Propulsion
1081
2100 - 2300
143.64
21.44
Wid e
Operating
1081
2000 – 2300 143.64
22.26
Speed Range
970
895
746
995
874
1417
1800 – 2100 143.64
1800 – 2000 140
1600 – 1800 135.44
1800
146
1500
158
2300
170.14
22.13
20.57
19.23
22.64
23.58
25.35
Caterpillar Inc ...continued
A uxiliary
Power
Intermittent
31B
32B
3B
Caterpillar Inc.,
3701 South Street,
(USA).
C9 / C9-ACERT
Marine Diesel Engine
Auxiliary
Main
C18/ C18 Acert
Application
Power (kW)
162
189
215
189
232
269
243
302
Speed (rpm) Pmax (bar)
1500
120
1500
129
1500
144
1800
155
1800
178
1800
192
1800
150
2100
172
MIP (bar)
16.8
19.3
21.6
16.8
20.1
22.8
20.9
22.5
Six cylind er, four stroke internal com bustion engine.
Max. continuous pow er rating (kW):
Main propulsion:
Main propulsion:
Wid e Operating
Speed Range
(WOSR)
Rem arks
Cert. N o.
05/ 00033(E3)
Marine Main Propulsion,
Marine Auxiliary, and
Em ergency Machinery
Main propulsion, auxiliary,
and em ergency m achinery in
03/ 00118(E3)
04/ 00052(E5)
597 @ 2200 rpm
533 @ 2100 rpm
448 @ 1800 rpm
533 @ 1800-2100 rpm
253
Type
Details of Approval
Application
Auxiliary d rive:
601 @ 1800 rpm
492 @ 1500 rpm
Light d uty:
746 @ 2300 rpm
651 @ 2200 rpm
599 @ 1800 rpm
Rem arks
Cert. N o.
254
Type
3508, 3508B and
3508C
Details of Approval
Pow er (kW) Speed (rpm )
Main Propulsion
970
1835
895
1785
820
1735
820
1800
820
1600
671
1200
Max Pressure(Bar) MIP(bar)
167
160
152
167
167
167
20.5
19.3
18.25
17.92
19.71
21.0
1800
1500
1200
1000
167
167
167
167
20.59
21.63
21.35
23.93
Main Propulsion
1678
1925
1566
1880
1454
1835
1342
1785
1231
1735
1231
1800
1230
1600
1118
1200
738.5
900
182
175
167
160
152
167
167
167
152
22.17
21.21
20.22
19.22
18.18
17.65
21.91
22.9
20.3
Auxiliary
1432
1257
1102
933
167
167
167
167
20.14
20.96
22.9
23.0
Auxiliary
968
856
682
649
3512, 3512B and
3512C
Application
1800
1500
1200
1000
Main, Auxiliary, Emergency
Marine Machinery
Rem arks
Cert. N o.
05/ 00045(E7)
255
Type
3512BH D &
3512CH D
Details of Approval
Main and Auxiliary
1821
1800
1500
1600
1363
1500
1268
1200
167
167
167
167
Application
Rem arks
Cert. N o.
21.96
20.6
19.96
23.7
256
Type
3512E H D
3516, 3516B and
3516C
Details of Approval
Application
Main Propulsion
1650
1600
1575
1600
1491
1600
1350
1600
1268
1600
1120
1600
1000
1600
1901
1800
1771
1800
1678
1800
Auxiliary
1789
1800
1632
1800
Diesel Electric Propulsion
1789
1800
1632
1800
Main Propulsion
2237
1925
2088
1880
1939
1835
1790
1785
1641
1735
1641
1800
1641
1600
1380
1200
985
900
Auxiliary
1901
1717
1383
1287
1800
1500
1200
1000
185
175
167
167
167
167
167
185
175
167
22.5
21.6
20.2
18.7
17.6
15.7
14.2
23.6
22.2
21.1
185
185
22.4
20.6
185
185
22.4
20.6
182
175
167
167
152
167
167
167
152
21.96
21.03
20.05
19.07
18.04
17.5
19.3
21.45
20.2
167
167
167
167
20.01
21.3
21.5
23.15
Rem arks
Cert. N o.
05/ 00045(E7)
257
Type
3516BH D &
3516CH D
Details of Approval
Main and Auxiliary
2368
1800
2100
1600
1940
1500
1603
1200
167
167
167
165
Application
Rem arks
Cert. N o.
21.69
22.5
21.13
22.5
258
Type
3516E H D
Details of Approval
Main Propulsion
2200
1600
2100
1600
2000
1600
1865
1600
2525
1800
2350
1800
2240
1800
Auxiliary
2368
1800
2105
1800
1921
1800
Diesel Electric Propulsion
2368
1800
2105
1800
1921
1800
Application
185
175
167
167
185
175
167
22.4
21.4
20.5
19.2
23.0
21.5
20.6
185
185
185
21.7
19.5
17.9
185
185
185
21.7
19.5
17.9
Rem arks
Cert. N o.
05/ 00045(E7)
The following light duty (non-continuous) ratings have also been
accepted in specific instances for the HD models, for main and
auxiliary purposes, provided Caterpillar’s operating requirements
are fully complied with:
Pow er (kW) Speed (rpm ) Max Pressure(Bar) MIP(bar)
Mod el
3512H D
1902
1800
176.5
23.7
Mod el
3516H D
2525
1800
168.68
23
259
Type
Caterpillar C175
series,
Details of Approval
16 cylind er V type 4 stroke turbocharged m arine d iesel engine
.
Pow er
Speed
MEP
(kW)
(rpm)
(bar)
Propulsion:
2550
1800
20.08
2428
1800
19.12
2239
1800
17.63
2168
1600
19.2
2082
1600
18.44
2001
1600
17.73
Auxiliary/Emergency
1930
1200
2418
1500
Application
Main, Auxiliary, Em ergency
Marine Machinery
Rem arks
Cert. N o.
13/ 00080(E1)
22.8
22.85
260
Cummins Inc,
Cummins Marine,
4500 Leeds Avenue, Suite 301,
Charleston, SC 29408,
(USA).
Type
Details of Approval
Application
Caterpillar C7.1
ACERT/ Perkins
1206D-E70TA
6 cylinder in-line 4 stroke turbocharged marine diesel engine.
Diesel Engine
QSK 19
Max. cont.
Rating (kW)
Pow er
(kW)
109.3
129
164
129
164
191.3
218.6
597
597
567
560
492
447
373
597
563
526
433
QSM 11-M &
QSM 11-D(M)
Rem arks
Cert. N o.
Auxiliary and Em ergency
Marine Machinery
13/ 00085(E4)
Main Propu lsion & Auxiliary
07/ 00007(E2)
Speed
(rpm)
1500
1500
1500
1800
1800
1800
1800
Rated speed
Max. press.
(rpm)
(bar)
Propulsion
2100
156.7
1800
156.9
2100
152.6
1800
155.1
1800
141.3
1800
117.9
1800
110.3
Auxiliary
1800
153.9
1800
155.1
1500
156
1500
135.8
MIP
(bar)
approval.
20.1
22.5
19.5
21.2
18.5
18
14.5
22.6
21.2
23.9
19
10.8 litre, 6 cylind er in line, non -reversible, four-stroke, single
acting, turbo-charged and after cooled , trunk piston type internal
com bustion engine w ith d irect injection.
Main propulsion and auxiliary
06/ 60014(E1)
This type approval d oes not cover the
engine m anagem ent system .
Engine particulars at approved m axim um continuous rating:N um ber of cylind ers:
6
261
Type
Details of Approval
Configuration:
In line
Bore (m m ):
125
Stroke (m m ):
147
Pow er (kW):
220 261
Speed (rpm ):
1800 1800
m ax.press. (bar): 115.6 130.5
m .i.p. (bar):
15.3 17.8
265
1500
136.8
17.7
265
1800
132.1
21.3
Application
298
2100
141.6
17.9
317
1800
151.6
21.3
336
2100
152.9
19.2
Rem arks
Cert. N o.
PLACE OF PRODUCTION
Cum m ins Engine Com pany
4720 Baker Street,
Lakew ood , N ew York
United States of Am erica
262
D aihatsu D iesel Mfg Co Ltd,
(Moriyama N o. 1),
45, Amura-cho,
Moriyama-city,
Shiga Pref., 524-0035,
Japan.
Type
Daihatsu
6DE(M)-18(L)
Details of Approval
4-stroke, direct injection, single acting line type trunk piston, diesel
engine
Application
auxiliary power drives
engine
Engine particulars :N um ber of cylind ers : 6 Line
Rated power (brake) (kW)
at 720/ 750/ 900 rpm
Engine speed (rpm)
Cert. N o.
11/ 10085(E2)
Suitable for operation with diesel oil
and heavy fuel oil up to 700 cSt at 50ºC
Rated power (brake) (kW) : 700/ 860 at 720/ 900 rpm
Engine speed (rpm) : 720/ 900
Maximum firing pressure (MPa) : 20.0
Mean indicated pressure (MPa) : 2.77/ 2.73 at 720/ 900 rpm
Symbol for model designation:“M”: Intended for directly driving propellers
“L”:
Modified for anticlockwise rotation
Daihatsu
6DE(M)-23(F)(L)
Rem arks
11/ 10096(E2)
: 1280/ 1280/ 1516
: 720/ 750/ 900
Maximum firing pressure (MPa)
: 20.0
Mean indicated pressure (MPa)
: 2.85/ 2.73/ 2.70
at 720/ 750/ 900 rpm
Symbol for model designation:“M”:
Intended for directly driving propellers
“F” :
Modified for front driving end for power-takeoff to other
machinery
“L” :
263
Type
Daihatsu
8DE(M)-28(L)
Details of Approval
engine
Rem arks
Expiry : 9 July 2020
Cert. N o.
15/ 10023
Rated power (brake) (kW)
Engine speed (rpm)
Maximum firing pressure (MPa)
Mean indicated pressure (MPa)
Application
: 3030 at 720/ 750 rpm
: 720/ 750
: 19.0
: 2.67/ 2.57
at 720/ 750 rpm
264
Type
D aihatsu D iesel Mfg Co Ltd
...continued
Details of Approval
D etroit D iesel Corporation,
13400 Outer D rive,
D etroit,
Michigan, 48239-4001,
(USA).
D eutz AG,
Ottostraße 1,
Köln 51149,
Germany.
Application
Rem arks
15/ 10023
Symbol for model designation:“M”: Intended for directly driving propellers
“L” :
Series 60 Marine
Engine 14L Version
Six cylind er, four stroke internal com bustion engine
Mod el
S60 14L
kW
317
298
355
410
473
552
615
rpm
1500
1800
1800
1800
1800
2300
2300
Four stroke, turbocharged and intercooled , trunk piston, Veetype internal com bustion engine
BF6M1015M,
BF6M1015MC
BF8M1015MC
Mean eff. Pressure : 19 bar
Cert. N o.
pow er d rives in m arine
applications
09/ 60004(E1)
02/ 20004(E2)
installation classed or intended
for classification with Lloyd’s
Register.
BF6M1015M
Max. continuous power rating,
main propulsion and auxiliary :
218 kW at 2100 rpm
218 kW at 1900 rpm
207 kW at 1800 rpm
Max. continuous pow er rating, auxiliary :
228 kW at 1800 rpm
210 kW at 1500 rpm
34B
265
Type
Details of Approval
Application
Rem arks
Cert. N o.
BF6M1015MC
300 kW at 2100 rpm
300 kW at 1900 rpm
285 kW at 1800 rpm
Max. continuous power rating, auxiliary :
310 kW at 1800 rpm
285 kW at 1500 rpm
35B
266
Type
Details of Approval
Application
Rem arks
Cert. N o.
02/ 20004(E2)
D eutz AG ...continued
BF8M1015MC
400 kW at 2100 rpm
400 kW at 1900 rpm
380 kW at 1800 rpm
Max. continuous power rating, auxiliary :
413 kW at 1800 rpm
380 kW at 1500 rpm
36B
37B
BF4M1013M
BF4M1013MC
Four stroke, turbocharged and intercooled , trunk piston, in-line
type internal com bustion engine
BF4M1013M – Propulsion / Auxiliary
95 kW at 2300 rpm
89 kW at 2100 rpm
83 kW at 1900 rpm
81 kW at 1800 rpm
74 kW at 1500 rpm
38B
Register.
02/ 20016(E3)
BF4M1013MC – Propulsion / Auxiliary
118 kW at 2300 rpm
110 kW at 2100 rpm
103 kW at 1900 rpm
100 kW at 1800 rpm
91 kW at 1500 rpm
39B
267
Type
Details of Approval
Application
Rem arks
Cert. N o.
BF4M1013M – Auxiliary
85 kW at 1800 rpm
81 kW at 1500 rpm
40B
BF4M1013MC – Auxiliary
105 kW at 1800 rpm
97 kW at 1500 rpm
41B
268
D eutz AG ...continued
Type
BF6M1013M
BF6M1013MC
BF6M1013MPC
Details of Approval
Four stroke, turbocharged and intercooled , trunk piston, in -line
type internal com bustion engine
BF6M1013M – Propulsion / Auxiliary
145 kW at 2300 rpm
134 kW at 2100 rpm
126 kW at 1900 rpm
123 kW at 1800 rpm
111 kW at 1500 rpm
BF6M1013MC – Propulsion / Auxiliary
174 kW at 2300 rpm
162 kW at 2100 rpm
153 kW at 1900 rpm
149 kW at 1800 rpm
134 kW at 1500 rpm
42B
Application
Register.
Rem arks
Cert. N o.
02/ 20016(E3)
43B
BF6M1013MCP – Propulsion / Auxiliary
195 kW at 2300 rpm
182 kW at 2100 rpm
169 kW at 1900 rpm
163 kW at 1800 rpm
142 kW at 1500 rpm
4B
BF6M1013M – Auxiliary
128 kW at 1800 rpm
122 kW at 1500 rpm
45B
BF6M1013MC – Auxiliary
155 kW at 1800 rpm
146 kW at 1500 rpm
46B
269
GE Transportation Parts, LLC,
GE Transportation - Grove City
Engine Plant,
1503 West Main St.,
Grove City, PA 16127,
(USA).
Type
L250
Details of Approval
Application
Firing Ord er:
6 cylind er
8 cylind er
Main propulsion, Auxiliary
Rem arks
Cert. N o.
15/ 00059
1-5-3–4–2–6
1–4–2–8–6–5–7–3
Maxim um continous pow er
Speed (rpm )
Maxim um com bustion pressure (bar)
Mean Ind icated Pressure (bar)
6 cyl
1922
1050
8cyl
2565
1050
220.0
25.7
270
GE Transportation Parts, LLC
...continued
Type
V250 Series Marine
Engine
Details of Approval
12 and 16 cylind er, four stroke internal com bustion engine
Mod el
12 Cylind er
12 Cylind er
16 Cylind er
16 Cylind er
GE Transportation Systems Rail D ivision,
1503, West Main street,,
Grove City, PA 16127,
(USA).
Guangzhou D iesel Engine
Factory Co., Ltd.,
73 Fangcun East Road, Liw an
D istrict,
Guangzhou City, Guangdong
Province,
7FDM
V228
Application
kW
3180
3499
4239
4664
rpm
1050
1050
1050
1050
Four Stroke Diesel Engine with Turbocharger
V and Firing Angle
45º
Maximum Combustion Pressure
173 bar
Cylinders
230 series engine
6230ZC
6230ZD
6230ZC-4
6230ZD-4
8230ZC
8230ZD
8230ZC-4
8230ZD-4
speed
MCR (kW)
900
1000
1050
1308
1453
1526
1438
1598
1678
12
900
1000
1050
1962
2180
2289
2158
2398
2518
16
900
1000
1050
2616
2907
3052
2877
3197
3357
In-line type, 4 stroke, direct injection, turbocharged, intercooler,
non-reversible, fitted with wet oil sump internal combustion
engine.
Power (kW)
810
730
810
Cert. N o.
applications
16/ 00028
applications
07/ 00051(E3)
drive.
13/ 80007
max. power (kW)
8
Engine Type
6230ZC
6230ZC
6230ZD
Rem arks
Speed (rpm)
750
750
750
271
Type
Details of Approval
230ZD
6230ZC-4
6230ZD-4
8230ZC
8230ZD
778
960
960
1080
1080
Application
Rem arks
Cert. N o.
720
900
900
750
750
272
Type
8230ZD
1037
8230ZC-4
1280
8230ZD-4
1280
Maxim um firing press. (bar):
MIP (bar):
Guangzhou D iesel Engine
Factory Co., Ltd. ...continued
Guascor S.A,
Barrio de Oikia s/n,
20759,
Zumaia,
Gipuzkoa,
Spain.
Details of Approval
F & SF range
Application
720
900
900
140
19.24
1500 rpm
kW
P m ax bar
180
100
255
130
280
130
310
145
340
145
410
145
450
145
620
145
890
145
kW
195
310
325
365
405
465
500
735
980
SF 180 TA-SG
SF240 TA-SG
SF360 TA-SG
SF480 TA-SG
1800
kW
476
635
953
1271
1500
kW
421
561
842
1122
1200
kW
337
449
673
898
Main Propulsion
Denom ination
F 180-SP
F 180 T-SP
F 180 TB-SP
F 180 TA-SP
F 180 TAB-SP
F240 TA-SP
F240 TAB-SP
kW
221
305
331
368
404
471
478
@ rpm
2000
1900
1800
2000
1800
1800
1800
p m ax (bar)
100
125
125
145
145
145
145
F 180-SG
F 180 T-SG
F 180 TB-SG
F 180 TA-SG
F 180 TAB-SG
F240 TA-SG
F240 TAB-SG
F360 TA-SG
F480 TA-SG
rpm
Cert. N o.
13/ 80007
Four Stroke, Supercharged Marine Diesel Engines
Main Propulsion and Auxiliary Power Generation
Auxiliary
Denom ination
Rem arks
power drives in marine
applications.
03/ 00035(E4)
1800 rpm
P m ax bar
95
125
125
145
145
145
145
145
145
175
175
175
175
273
Type
F360 TA-SP
F480 TA-SP
SF 180 TA-SP
SF240 TA-SP
SF360 TA-SP
SF480 TA-SP
Guascor S.A ...continued
Henan D iesel Engine Industry
Co Ltd,
N o. 173 Zhongzhou West Road,
Luoyang City,
Henan Province,
Details of Approval
HND-TBD234 series
V6,V8 and V12
cylinder engine
735
1029
476
635
953
1271
2000
1800
1800
1800
1800
1800
Application
145
145
175
175
175
175
Power (kW)
205
273
410
Cert. N o.
03/ 00035(E4)
non-reversible internal combustion engine.
Engine Type
TBD234V6
TBD234V8
TBD234V12
Rem arks
Main auxiliary drive.
13/ 80012
services
11/ 60007
Speed (rpm)
1500
1500
1500
TBD234V6
228
1800
TBD234V8
303
1800
TBD234V12
444
1800
Maximum firing pressure (bar): 134.6 @1500rpm
142.6 @1800rpm
MIP (bar): 16.87@1500rpm
15.75@1800rpm
Bore x Stroke: 128 mm x 140 mm
Honeyw ell Turbo
Technologies,
2525 W 190th Street,
TOR-36-2, Torrance,
California, 90504,
(USA).
GTA5002W
GTA5523W
Mod el nam e
Maxim um Speed
Maxim um Tem perature
GTA5002W
108600 rpm
760ºC
GTA5523W
90500 rpm
760ºC
PLACE OF
PRODUCTION
Lazaro Cardenas Boulevard 2545
Mexicali, BC
Mexico 21396
274
Hyundai Heavy Industries Co.,
Ltd.,
Engine and Machinery
D ivision,
1000, Bangeojinsunhw an-doro,
D ong-gu,
Ulsan, 682-792,
Korea, Republic of.
Type
HiMSEN H17/ 28
Details of Approval
trunk piston, diesel engine
Engine particulars :N um ber of cylind ers : 5, 6, 7 and 8 in-line
Rated power (brake) (kW/ cyl) : 90/ 90/ 115/ 115
Engine speed (rpm) : 720/ 750/ 900/ 1000
Maximum firing pressure (bar) : 170
Mean indicated pressure (bar) : 26.0/ 24.9/ 26.5/ 23.9
at 720/ 750/ 900/ 1000 rpm
Application
Marine main propulsion and
Rem arks
Cert. N o.
05/ 10002(E1)
and heavy fuel oil up to 700 cSt at
50ºC.(pending)
275
Ltd. ...continued
Type
HiMSEN H32/ 40
Details of Approval
trunk piston, diesel engine
Application
Engine particulars :N um ber of cylind ers : 6, 7, 8 and 9 in-line
Rated power (brake) (kW/ cyl) : 500
Engine speed (rpm) : 720/ 750
Mean indicated pressure (bar) : 28.54/ 27.5
at 720/ 750 rpm
HiMSEN H46/ 60V
4-stroke, direct injection, single acting and Vee type trunk piston,
diesel engine
Rem arks
Cert. N o.
07/ 10019(E1)
13/ 10044
Engine particulars :N um ber of cylind ers 12, 14, 16, 18 and 20 Vee
Rated power (brake) (kW/ cyl)
: 1,145/ 1,175/ 1,250 at 500/ 514/ 600 rpm
Engine speed (rpm) : 500/ 514/ 600
Mean indicated pressure (bar)
: 29.7/ 29.7/ 27.4 at 500/ 514/ 600 rpm
HiMSEN H25/ 33
4-stroke, vertical, direct injection, single acting and trunk piston,
diesel engine
Engine particulars :N um ber of cylind ers : 5, 6, 7, 8 and 9 in -line
Rated pow er (brake) (kW/ cyl)
: 240/ 250/ 300/ 300
Engine speed (rpm ) : 720/ 750/ 900/ 1000
Maxim um firing pressure (bar)
: 200
Mean ind icated pressure (bar)
: 27.1/ 27.2/ 27.3/ 25.0
13/ 40001(E2)
at 720/ 750/ 900/ 1000 rpm
276
Ltd. ...continued
Type
HiMSEN H21/ 32
Details of Approval
Application
diesel engine
Internal combustion dual-fuel engine with a common rail pilot fuel
injection system
Cert. N o.
13/ 40002(E2)
Suitable for operation with diesel oil and
heavy fuel oil up to 700 cSt at 50ºC
Engine particulars :N um ber of cylind ers : 5, 6, 7, 8 and 9 in -line
: 160/ 160/ 200/ 200
Engine speed (rpm ) : 720/ 750/ 900/ 1000
: 200
Mean ind icated pressure (bar)
: 26.5/ 25.4/ 26.5/ 23.9
at 720/ 750/ 900/ 1000 rpm
HiMSEN H 35/ 40DF
Rem arks
auxiliary power drives classed
or intended for classification
with Lloyd’s Register
13/ 40009
applications
11/ 00064(E3)
Engine particulars :N um ber of cylind ers : 6, 7, 8 and 9 in -line
: 480
Engine speed (rpm ) : 720/ 750
: 173
Mean ind icated pressure (bar) : 21.99 (720 rpm ) & 21.28 (750
rpm )
John D eere Pow er Systems,
P.O. Box 8000 PEC 81K,
Waterloo 1A, 50704-8000,
(USA).
Six cylind er, four stroke intern al com bustion engine
Purpose
model
M Rating rating
or
kW
Operating
10%
overload
kW
speed
rpm
277
Type
6135SFM75
Details of Approval
Propulsion
M5
559
M4
485
M3
429
M2
373
M1
317
n/ a
n/ a
n/ a
n/ a
n/ a
Application
Rem arks
Cert. N o.
2200
2100
2000
1900
1800
278
John D eere Pow er Systems
...continued
Type
Details of Approval
Application
Rem arks
Cert. N o.
11/ 00064(E3)
6135AFM75
M4
M3
M2
M1
429
373
317
272
n/ a
n/ a
n/ a
n/ a
2100
2000
1900
1800
6135SFM85
M5
M4
M3
M2
M1
559
485
429
373
317
n/ a
n/ a
n/ a
n/ a
n/ a
2200
2100
2000
1900
1800
6135AFM85
M4
M3
M2
M1
429
373
317
272
n/ a
n/ a
n/ a
n/ a
2100
2000
1900
1800
Auxiliary and EmergencyGenset
6135SFM75
60H z
50H z
416
334
458
366
1800
1500
6135AFM75
60H z
50H z
333
278
367
306
1800
1500
6135SFM85
60H z
50H z
416
334
458
366
1800
1500
6135AFM85
60H z
50H z
333
278
367
306
1800
1500
279
3801 West Ridgew ay Avenue,
Waterloo, IA, 50704-8000,
(USA).
Type
6090
Details of Approval
Application
applications
Purpose
model
M Rating rating
or
kW
Operating
Speed
10%
overload
kW
Rem arks
Cert. N o.
11/ 00071(E3)
speed
rpm
280
...continued
Type
Details of Approval
Propulsion
SFM75
Application
Rem arks
Cert. N o.
11/ 00071(E3)
M5
M4
M3
M2
M1
410
373
317
280
242
n/
n/
n/
n/
n/
a
a
a
a
a
2500
2400
2300
2200
2100
AFM75
M4
M3
M2
M1
317
280
242
213
n/
n/
n/
n/
a
a
a
a
2400
2300
2200
2100
SFM85
M5
M4
M3
M2
M1
410
373
317
280
242
n/
n/
n/
n/
n/
a
a
a
a
a
2500
2400
2300
2200
2100
M4
317
M3
280
M2
242
M1
213
Auxiliary and EmergencyGenset
n/
n/
n/
n/
a
a
a
a
2400
2300
2200
2100
SFM 75
60Hz
50Hz
278
222
306
244
1800
1500
HFG 86
60Hz
60Hz
50Hz
60Hz
50Hz
315
386
373
316
310
345
422
408
346
339
1800
1800
1500
1800
1500
AFM75
60Hz
50Hz
222
195
244
214
1800
1500
AFM85
281
Type
Details of Approval
Application
SFM 75
60Hz
50Hz
278
222
306
244
1800
1500
AFM75
60Hz
50Hz
222
195
244
214
1800
1500
Rem arks
Cert. N o.
282
3800 Ridgew ay Avenue,
Waterloo,
Iow a 50701,
(USA).
Type
6068H F275
6068H F279
6068AFM75
6068AFM85
6068TFM75
6068TFM76
6068SFM50
6068SFM75
6068SFM85
Details of Approval
Application
Mod el
Rating1
applications.
Em ergency (w hen using
options 1908, 1955 & 19BP).
kW
hp
746W
rpm
6068H F275
164
187
210
123
220
250
282
165
1800
1800
1800
1500
6068H F279
153
205
1500
6068SFM75
Sea w ater after cooled M5
M4
M3
M2
M1
60H z
50H z
298
265
239
209
186
174
146
400
355
321
280
249
233
196
2800
2700
2600
2500
2400
1800
1500
6068SFM85
Sea w ater after cooled M5
M4
M3
M2
M1
60H z
50H z
298
265
239
209
186
195
168
400
355
321
280
249
260
225
2800
2700
2600
2500
2400
1800
1500
Rem arks
Prod uced at:
Cert. N o.
13/ 00046(E4)
Usine d e Saran
La Foulonnerie B.P. 11013
45401 Fleury-les-Aubrais Ced ex
France
and
Motores John Deere S.A. d e C.V.
Carretera a Mieleras Km 6.5 s/ n,
27400
Torreon, Coahuila
Mexico
283
Type
Details of Approval
6068SFM50
Sea w ater afte rcooled M5
M4
M3
224
199
176
Application
300
267
236
Rem arks
Cert. N o.
2600
2500
2400
284
Type
Details of Approval
6068TFM75
Supercharged
...continued
Application
Rem arks
Cert. N o.
13/ 00046(E4)
M3
M2
M1
150
133
118
201
178
158
2600
2500
2400
6068TFM76
60H z
50H z
110
89
148
119
1800
1500
6068AFM75
M4
M3
M2
M1
60H z
50H z
330
300
265
230
223
186
2600
2500
2400
2300
1800
1500
6068AFM85
M4
M3
M2
M1
60H z
50H z
330
300
265
230
223
186
2600
2500
2400
2300
1800
1500
246
224
198
172
166
139
246
224
198
172
166
139
N ote 1 – Only the M1 rating is the m axim um continuous pow er
rating. All other ratings are short term pow er ratings as per the
m anufactures d ocum entation.
3801 West Ridgew ay Avenue,
Waterloo, IA, 50704-8000,
(USA).
4045
Four cylind er, in-line, internal com bustion engine:
Incorporating:
4045AFM85;
4045TFM85
N o. of cylind ers:
Bore (m m ):
Stroke (m m ):
4
107
127
Marine propulsion, auxiliary
and em ergency d rive
13/ 00079(E1)
Approval
285
Type
Details of Approval
4045AFM85:
Purpose:
Propulsion (M4)
Propulsion (M3)
Propulsion (M2)
Propulsion (M1)
Aux/ Em ergency
Aux/ Em ergency
Pow er Speed
(kW): (rpm ):
168
149
134
119
110
89
2600
2500
2400
2300
1800
1500
Max.
Pressure
(bar):
143
141
111
45
113
90
Application
Rem arks
Cert. N o.
MIP
(bar):
19.92
18.48
17.37
16.15
18.14
17.42
286
Type
Details of Approval
4045TFM85:
Purpose:
...continued
Aux/ Em ergency
Aux/ Em ergency
Application
Rem arks
Cert. N o.
13/ 00079(E1)
Pow er Speed
(kW): (rpm ):
74
61
1800
1500
Max.
Pressure
(bar):
111
78
MIP
(bar):
12.73
12.65
Lombardini S.r.l a Kohler
Company,
Via Cav. D el Lavoro,
A. Lombardini, 2,
42124 Reggio Emilia,
Italy.
KDI 1903 M and KDI
2504 M
Three and Four cylind er, in -line, internal com bustion engine:
Bore (m m ) : 88
Stroke (m m ) : 102
KDI 1903 M
KDI 2504 M
N um ber of cylind ers :
3
3
4
Maxim um Pow er
19kW 18.4kW 25.4kW
Ratings:
Rated rpm
1500
1800 1500
Max Pressure, bar
73
56
73.0
MIP, bar
10.2
8.5
9.8
Auxiliary Drive
14/ 00033(E1)
MAN B&W D iesel A/S,
Teglholmsgade 41,
D K-2450 Copenhagen SV,
D enmark.
S42MC
Large bore, crosshead , 2 stroke, internal com bustion engine.
Main and auxiliary pow er
generation and propulsion in
m arine applications.
11/ 00033
MAN D iesel & Turbo UK Ltd,
Hythe Hill,
Colchester,
Essex, CO1 2HW,
12VP185S
12VP185T
18VP185T
Main and auxiliary propulsion
of patrol craft, high speed
ferries and high speed yachts
in m arine applications, and
m arine and offshore genrator
sets.
96/ 00097(E5)
N o. of cylind ers:
6-12 inclusive
Max. cont. pow er rating (kW.cyl): 1080 @ 136 rpm
Max. firing pressure (bar):
145
20.5
Four stroke 12 and 18 cylind er d iesel engines:
D esignation
Pow er
Firing Pressure MIP
(kW)
(bar)
(bar)
12 cylinder
12 VP 185S
@1870rpm
2,300
190
26.5
287
Type
Details of Approval
12 VP 185T
@1950rpm
12 VP 185
@1950rpm
12 VP 185T
18 cylinder
18VP 185T
@1870rpm
18VP 185T
@1950rpm
Application
2,610
200
30
2,610
2760
192.2
198.5
26.62
28.11
3500
190
26.0
4000
200
28.36
Rem arks
Cert. N o.
288
Type
Application
Rem arks
Cert. N o.
96/ 00097(E5)
MAN D iesel & Turbo UK Ltd
...continued
MAN D iesel & Turbo,
Teglholmsgade 41,
D K-2450 Copenhagen SV,
D enmark.
Details of Approval
N umber of
Cylinders/Type
Firing Order
(from free end)
K98MC-C
12 cylind er 90º V
1-5-3-6-2-4
1-5-9-3-6-8-2-4-7
Large bore, cross-head, two stroke, internal combustion engine
with 6 to 12 cylinders
Mean indicated pressure (bar):
Engine speed (rpm):
No. of cylinders:
Max. Cont. Power Rating/ cyl:
(244020 throw only
No. of cylinders
6
7
8
9
10
11
12
L60 MC-C
18 cylind er 90º V
Marine propulsion
00/ 00094(E2)
Main propulsion.
03/ 00105(E1)
150
20.2
104
6 to 12
5710 kW @ 104 rpm
6020 kW @ 104 rpm)
Firing order (from non-driving end)
1-5-3-4-2-6
1-7-2-5-4-3-6
1-8-3-4-2-7-2-5-6
Uneven
1-8-7-3-5-9-4-2-10-6
Uneven
1-8-12-4-2-9-10-5-3-7-11-6
Large bore, cross-head, two stroke internal combustion engine:
Speed (rpm ):
4 to 12
2,230
123
160
21
289
Type
L70 MC-C
Details of Approval
Application
N um ber of cylind ers:
Speed (rpm ):
Main Propulsion.
Rem arks
Cert. N o.
04/ 00065(E1)
4 to 12
3,110
108
150
20.0
290
MAN D iesel & Turbo
...continued
Type
S90ME-C9
Details of Approval
Speed (rpm ):
S50
G50
Speed (rpm ):
Main propulsion.
5 to 8
1720
100
185
22
Cert. N o.
13/ 00026
13/ 00028
See Certifiacte for Other Cond itons.
Main propulsion.
5 to 8
2680
97
185
22
Rem arks
4 to 8
1780
117
190
22
Speed (rpm ):
Main propulsion.
6 to 14
5810
84
175
21
Speed (rpm ):
G60
Application
13/ 00070
Other Cond itions.
Main propulsion.
13/ 00081(E1)
291
Type
G80ME-C9
Details of Approval
Application
Speed (rpm ):
4 to14
4710
72
185
22
Main propulsion.
Rem arks
Cert. N o.
13/ 00083
292
MAN D iesel & Turbo
...continued
Type
G70ME-C9.2
Details of Approval
Direct reversible, tw o stroke, single acting, turbo -charged ,
uniflow scavenged , crosshead -type internal com bustion engine
w ith d irect fuel injection
N um ber of Cylind ers:
Maxim um Continuous Rating:
Bore & Stroke (m m ):
Mean Ind icated Pressure (bar):
S30
L35MC Mk VI
14/ 00025
: 220 bar
Main propulsion.
14/ 00096
Marine m ain propulsion and
as prim e m over in stationary
applications.
93/ 00195(E3)
on ships and off-shore
for classi-fication with Lloyd’s
Register.
4 to 12 (In Line)
650
210
145
19.6
Max. firing pressure
Cert. N o.
6
640.0
195.0
185
21
Sm all bore crosshead tw o stroke reciprocating internal
com bustion engine:
Number of cylinders:
Maximum continuous power rating (kW/ cyl):
Speed (rpm ):
Maximum firing pressure (bar):
5,6,7,8,9 L21/ 31
Marine m ain propulsion
Rem arks
5, 6 & 7
3640 kW/ cylind er at 84 rpm
700 x 3256
185
22
Speed (rpm ):
MAN D iesel & Turbo SE,
Stadtbachstraße 1,
86224 Augsburg,
Germany.
Application
approval
02/ 20009(E4)
293
Type
Details of Approval
Application
Rem arks
Cert. N o.
Max. continuous power rating for
main propulsion:
200 kW/ Cyl. at 900 rpm
generator set:
220 kW/ Cyl. at 900/ 1000 rpm
294
...continued
Type
6, 7, 8, 9 L 48/ 60B
12, 14, 16, 18 V
48/ 60B
Details of Approval
type and vee type internal com bustion engine
210 bar
:
Application
Rem arks
Cert. N o.
Register.
02/ 20055(E3)
As auxiliary drives on ships
and offshore installation
Register.
06/ 20024(E3)
Register.
08/ 20017(E1)
1200 kW/ cyl. at 500/ 514 rpm
5,6,7,8,9 L16/ 24
: 180 bar
Max. continuous pow er rating :
6,7,8,9 L 48/ 60 CR
12,14,16,18 V 48/ 60
CR
type and vee type internal com bustion engine based on a
com m on rail fuel injection system
210 bar
:
1200 kW/ cyl. at 500/ 514 rpm
295
Type
6,7,8,9,10 L 32/ 44 CR
12,14,16,18,20 V
32/ 44 CR
Details of Approval
type and vee type internal com bustion engine based on a
com m on rail fuel injection system
250 bar
Application
on ships classed or intended for
Register.
Rem arks
Cert. N o.
11/ 20042(E4)
:
600 kW/ cyl. at 720/ 750 rpm
296
...continued
Type
6-7-8-9 L 51/ 60 DF
Details of Approval
Four stroke, turbocharged and intercooled, trunk piston, in -line
type internal combustion dual-fuel
engine with a common rail pilot fuel injection
system
170 bar
Application
Rem arks
Cert. N o.
12/ 20032(E1)
on ships classed or intended for
Register.
16/ 20006
Prim e m overs for propulsion
installations and auxiliary
services.
10/ 30006
Register.
:
975 kW/ cyl. at 500 rpm
6-7-8-9-10 L351/ 44
DF
type internal com bustion d ual-fuel
engine w ith a com m on rail pilot fuel injection
system
:
202 bar
Mitsubishi Heavy Industries
Ltd,
Kanagaw a 229-1193,
Sagamihara,
Japan.
S12R-C2MPTK (FW)
S16R-C2MPTK (FW)
Four Stroke, Single-Acting, Supercharged
Power
: 940 kW, 12V
: 1250 kW, 16V
Max. firing pressure : 142.2 bar
MIP
: 16.25 bar
297
Type
S12A2-C2MPTK (FW)
Details of Approval
Four Stroke, Single-Acting, Supercharged
Power
: 701 kW,
Max. firing pressure : 117.6 bar
MIP
: 13.59 bar
Application
Prim e m overs for propulsion
installations and auxiliary
services.
Rem arks
Cert. N o.
10/ 30007
298
MTU Friedrichshafen GmbH,
Maybachplatz 1,
88045 Friedrichshafen,
Germany.
Type
Series 2000
Com m on Rail
8, 10, 12 and 16
Cylind er
Details of Approval
Reciprocating high speed internal com bustion oil
engine, non-reversible, d irect injection based on a
Com m on Rail fuel injection system , 4 SCSA,
turbocharged , V-type
Pow er (MCR)
: 110.2 kW/ cyl. at 2450 rpm
Max. firing pressure : 200 bar
MIP
: 26.8 bar
Application
As prime movers for multi
engine installations and
auxiliary drive on ships and
offshore installations, classed
or intended for classification
with Lloyd’s Register.
Rem arks
Cert. N o.
05/ 20054(E4)
Not intended as single
emergency source of
electrical power
MTU
Series 2000 P
V12 and V16
Reciprocating high speed internal com bustion oil engine non reversible, d irect injection com pression ignition, 4 SCSA,
turbocharged , V-type.
Pow er
: 65,7 kW/ cyl. at 2100 rpm
Max. firing press.: 160 bar
As auxiliary d rive on ships
and offshore installations,
Classification w ith Lloyd ´s
Register.
06/ 20029(E4)
MTU Series
4000-Mx3 Workboat
Reciprocating high speed internal combustion oil engine, non
reversible, direct injection based on a Common Rail (CR) fuel
injection system, 4 SCSA, turbocharged, V-type
As prim e m overs for m ultiengine plants and auxiliary
d rives on ships or intend ed
for classifica-tion w ith Lloyd ’s
Register
10/ 20012(E3)
As prim e m overs for
m ulti-engine plants and
auxiliary d rives on ships
or intend ed for classification w ith Lloyd ’s Register
Max. power (MCR) : 140 kW / cyl. at 1800 rpm
MIP
: 22.2 bar
MTU
Series 4000 Px3
Reciprocating high speed internal combustion oil engine, non
reversible, direct injection based on a Common Rail (CR) fuel
injection system, 4 SCSA, turbocharged, V-type
Max. power (MCR)
: 140 kW / cyl. at 1800 rpm
130 kW / cyl. at 1500 rpm
Not intended as single emergency
source of elec-trical power
12/ 20015 (E1)
emergency source of electrical power
299
Type
16V4000 M90
Details of Approval
Reciprocating high speed internal com bustion oil
engine, non-reversible, d irect injection based on a
Com m on Rail (CR) fuel injection system , 4 SCSA,
turbocharged , V-type
Pow er (MCR) : 2480 kW at 2100 rpm
Max. firing
pressure
:
180 bar
MIP
:
24.8 bar
Application
classification w ith
Lloyd ’s Register w here the
International Convention for
the Safety of Life at Sea
requirem ents are not
applicable
Rem arks
Cert. N o.
15/ 20050
300
Type
Details of Approval
Application
Rem arks
(SOLAS, Chapter I, Part A,
Regulation 3)
...continued
Cert. N o.
15/ 20050
N ot intend ed as single
em ergency source of electrical
pow er
MTU Series
1163 Mx4
Reciprocating internal combustion oil engine, non reversible, direct
injection based on a Common Rail (CR) fuel injection system, 4
SCSA, 2 stage sequential exhaust turbocharged, V-type
Max. power (MCR) : 336.5 kW / cyl. at 1285 rpm
MIP
: 31 bar
d rives on ships or intend ed
for classifica-tion w ith Lloyd ’s
Register
Expires: 14.12.2020
15/ 20139
Not intended as single emergency
source of elec-trical power
MTU
Series
2000 Mx0/ x1
V8, V12 and V16
Reciprocating high speed internal com bustion oil engine non reversible, d irect injection com pression ignition, 4 SCSA,
turbocharged , V-type.
Pow er:
93,25 kW/ cyl. at 2350 rp m
Max. firing press.: 180 bar
MIP:
26,5 bar
As prim e m overs and
auxiliary d rive on ships and
offshore installations, classed
97/ 20062(E8)
Series
4000 Mx0/ x1
8, 12 and 16 cyl.
Reciprocating high speed internal combustion oil
engine, non-reversible, direct injection based on a
Common Rail (CR) fuel injection system, 4 SCSA,
turbocharged, V-type
d rives on ships and
offshore installation
classification w ith Lloyd ’s
Register
98/ 20037(E5)
No. of Cylinders : 8/ 12
16
Power (MCR) : 155 kW/ cyl. 140 kW/ cyl.
at 2100 rpm
Max. firing
pressure
:
180 bar
MIP
:
24.8 bar
emergency source of electrical
power
301
MTU-D D C,
Maybachplatz 1,
Friedrichshafen, 88045,
Germany.
Type
MTU Series
20V8000 Mx1
Details of Approval
Reciprocating high speed internal combustion
oil engine, non reversible, direct injection based
on a Common Rail (CR) fuel injection system,
4 SCSA, turbocharged, V-type
Application
classed w ith Lloyd ’s Register
Rem arks
Cert. N o.
08/ 20058(E1)
302
Type
Details of Approval
MTU Series
4000 Mx3
12, 16 and 20 cyl.
Reciprocating high speed internal combustion
oil engine, non reversible, direct injection based
on a Common Rail (CR) fuel injection system,
4 SCSA, turbocharged, V-type
Power (MCR)
: 195 kW / cyl. at 2100 rpm
MIP
: 29,3 bar
4PB and 4 PI-Cat1
BICERA type crankcase relief valve:
Relief area:
Protected Volum e
Cranking Pressure
Valve plate lift at 0.2 bar
4PB and 4 PI-Cat1
Perkins model
4.4GM
4.4TGM
4.4TWGM
4.4TW2GM
81.07 cm 2
0.7 m 3
0.9 bar
4.27 cm
BICERA type crankcase relief valve:
Relief area:
Protected Volum e
Cranking Pressure
Valve plate lift at 0.2 bar
Perkins Engine Company Ltd,
Frank Perkins Way,
Eastfield,
Peterborough,
Cambridgeshire, PE1 5N A,
Rem arks
Power (MCR)
: 9100 kW at 1150 rpm
MIP
: 30,1 bar
MTU-D D C ...continued
Penn-Troy Manufacturing Inc.,
650, Railroad Street,
Troy, PA, 16947,
(USA).
Application
81.07 cm 2
0.7 m 3
0.9 bar
4.27 cm
Four Stroke, Supercharged Marine Diesel Engines
for Auxiliary Power Generation
Ratings:
Cert. N o.
08/ 20058(E1)
As prim e m overs for m ultiengine plants and
auxiliary d rives on ships or
intend ed for classifica-tion
w ith Lloyd ’s Register
09/ 20014(E2)
Explosion Relief Valve Valve
for the crankcase of diesel
engines
16/ 00008
Explosion Relief Valve Valve
for the crankcase of diesel
engines
Auxiliary drives in marine
applications.
Expires: 20 December 2016
N ot intend ed as single
em ergency source of
electrical pow er
approval
16/ 00011
approval
06/ 00098(E1)
Refer to Conditons of Approval and
comments set forth in Machinery
General Design Appraisal Document
LDS/ ENG/ 6680-902 Issue 01
303
Type
Details of Approval
Engine Mod el
Perkins Sabre
Caterpillar
Application
4.4GM
.4TGM
4.4TWGM 4TW2GM
C 4.4
NA
C 4.4
DIT
C 4.4
DITA
Rem arks
Cert. N o.
C 4.4
DITA
304
Type
Perkins Engine Company Ltd
...continued
Details of Approval
Leroy Som er
Alternator Designation
“LSAM…”
43.2 S35 43.2 L8
44.2 VS3 44.2 S7
at 1500
at 1800
Scania CV AB,
SE-151 87 Södertälje,
Sw eden.
DI 16M
Application
56.4
75
93.6
102
117
131
rpm kW 49.1
P m ax
bar
96
63.6
82.7
106.8
108
123
143
8 cylind er, four stroke, internal com bustion, vee engine w ith
EMS electronic governing system :
pow er generation
Bore (m m ):
Stroke (m m ):
Vee angle (°):
Refer to certificate for
cond itions of approval
8
127
154
90
Pow er
(kW):
42M/ 43M
441
42M/ 43M/ 50M 550
42M/ 43M
588
Speed
(rpm):
1800
2100
2200
44M
44M
49M
49M
55M
55M
1500
1800
1500
1800
1500
1800
426
469
450
500
450
532
Cert. N o.
06/ 00098(E1)
rpm kW 42.7
P m ax
bar
92
Model
Rem arks
Max. press.
(bar):
140
164
164
148
151
160
162
162
164
Expires: 1 May 2019
04/ 00072(E6)
MIP
(bar):
21.4
23.1
23.0
23.6
22.1
24.9
23.5
24.9
24.8
305
Type
DI13 M
Details of Approval
No. of cylinders:
6 inline
Firing order (from non-driving end): 1-5-3-6-2-4
Application
Main propulsion and
auxiliary/ em ergency pow er
generation (see previous
colum n)
Rem arks
Expires: 5 May 2019
Cert. N o.
11/ 00048(E3)
306
Type
Scania CV AB ...continued
DI 16M 070 series;
DI 16 M 080 Series.
Details of Approval
Application
Model/Purpose
070M Propulsion
071M Propulsion
072M Propulsion
073M Propulsion
074M Aux./ Em erg.
074M Aux./ Em erg.
075M Aux./ Em erg.
075M Aux./ Em erg.
Pow er
405
368
478
405
426
426
426
426
Speed
1800
1800
2300
2100
1500
1800
1500
1800
Pmax.(bar)
184
174
194
179
177
168
186
172
077M Interm ittent,
for coastal and IWW
078M Propulsion
080M Propulsion
081M Propulsion
082M Propulsion
084M Aux./ Em erg.
085M Propulsion
086M Propulsion
551
2300
202
405
294
368
405
426
478
496
2100
1800
1800
2100
1800
2300
2300
177
142
173
162
178
181
197
8 cylind er, four stroke, internal com bustion, vee engine w ith
EMS el;ectronic governing system :
N o. of cylind ers:
Bore (m m ):
Stroke (m m ):
Vee angle (°):
Rem arks
Cert. N o.
11/ 00048(E3)
Main propulsionj and
auxiliary pow er generation
.
pow er generation
8
130
154
90
13/ 00039(E1)
approval
Refer to certificate for engine pow ers and speed s
DI 09 M 070 Series
5 cylind er, four stroke, in-line internal com bustion engine:
N o. of cylind ers:
Bore (m m ):
Stroke (m m ):
Sw ept volum e (l):
5
130
140
9.3
13/ 00067
approval
307
Type
Details of Approval
Mod el:
Scania CV AB ...continued
070M
072M
074M
074M
Societé Internationale des
Moteurs Baudouin,
Techoparc du Bregadan,
Cassis CS500001,
France.
M26.2
Turbomed Yiannis
Paraskevopoulos S.A.,
Schisto Industrial Park
(VIPAS), Block 2, Str. 1,
188 63 Perama, Hellas,
Greece.
TM87-X
TM180-X
Volvo Penta, AB,
Vara Volvofabriken 1,
SE-534 91 VARA,
Sw eden.
D9
Pow er
(kW):
257
294
269
323
Speed
(rpm ):
1800
2100
1500
1800
Application
Max. press.
(bar):
160
177
172
181
MIP
(bar):
19.4
19.5
24.1
24.2
Bore (mm)
Stroke (mm)
no. of cyls.,
150
150
6L
8V
12 V
Power (kW) ............ 1500 rpm
.................................1800 rpm
.................................1900 rpm
Peak pressure ......... 1500 rpm
(bar).................... 1800 rpm
.................................. 1900 rpm
59.2
61.3
67.4
142
135
140
53.1
55.1
64.4
140
135
138
59.2
61.3
67.4
142
135
140
Mod el nam e
TM80-X
TM180-X
Com pressor Type
Rad ial
Rad ial
Turbine Type
Rad ial
Rad ial
Rated speed , rpm
60000 rpm
52000 rpm
Maxim um Speed (<1h), rpm 65000 rpm
57000 rpm
650ºC 650ºC
Rem arks
Cert. N o.
13/ 00067
d rive m achinery in m arine
applications.
13/ 00005
marine and offshore services
15/ 00096
pow er in m arine application
05/ 00025(E3)
Firing ord er (from non-d riving end ): 1-5-3-6-2-4
308
Type
Details of Approval
Function:
Propulsion
Pow er (kW):
261
Speed (rpm ):
1800
Max. press.(bar): 178
m .i.p.(bar):
21.8
313
2200
185
21.4
368
2600
194
21.3
423
2500
198
25.5
Application
Rem arks
Cert. N o.
Auxiliary/
em ergency
247
278
1500
1800
178
180
24.8
23.2
309
Volvo Penta, AB ...continued
Type
Six cylind er, four
stroke internal
com bustion engine
Type: D13
Details of Approval
Application
Function: Propulsion
441
404
368
1900
1900
1800
165
157
160
21.8
20.0
19.2
331
1800
142
17.3
Pow er (kW):
Speed (rpm ):
Max. press. (bar):
m .i.p. (bar):
Auxiliary/ Em ergency
300
360
360
1500
1800
1500
146
154
176
19.0
19.0
23.0
400
1800
170
21.0
D11
Pow er (kW):
Speed (rpm ):
Max. press. (bar):
m .i.p. (bar):
294
1800
137
15.3
Four stroke, turbocharged and intercooled , trunk piston, in-linetype internal com bustion engine
in m arine application
auxiliary d rive
Rem arks
Cert. N o.
For Other Cond itions see Certificate.
11/ 00050
16/ 00010(E1)
11/ 00057(E1)
Propulsion and Auxiliary
47B
type
R3
R4
R5
Wartsila Finland Oy,
Industrial Operations,
Järvikatu 2-4,
FI-65100 Vaasa,
Finland.
L20DF
kW
375
460
493
rpm
2250
2400
2450
Inline type four stroke Dual Fuel internal com bustion engine:
‘A’ Type
Maxim um Continuous Pow er Rating
Max. press. (bar):
BMEP (bar):
d rive in m arine applications.
176kW/ Cyl @ 1200 rpm
146kW/ Cyl @ 1000 rpm
200
20
310
Type
Details of Approval
‘B’ Type
Maxim um Continuous Pow er Rating
Max. press. (bar):
BMEP (bar):
Application
Rem arks
Cert. N o.
185kW/ Cyl @ 1200 rpm
160kW/ Cyl @ 1000 rpm
200
21; 21.8
311
Wartsila France SAS,
La Combe,
BP 113,
17700 Surgeres,
France.
Type
UD25 L6 S5D
Details of Approval
Six cylind er, In-line, four stroke am rine d iesel engine:
Max. continuous pow er rating (kW):
Max. continuous speed (rpm ):
Max. firing ord er(bar):
Firing ord er:
Wartsila Qiyao D iesel
Company Ltd. (Shanghai),
N o.2988 Jiangshan Road,
Shanghai 201306,
WA6L16
Winterthur Gas & D iesel Ltd.,
Schützenstrasse 1-3,
CH-8401 Winterthur,
Sw itzerland.
RTA96C-B and RTflex96C-B
Application
433
1500
156
auxiliary d rive.
Rem arks
Cert. N o.
05/ 00004(E1)
14/ 80012
345
1200
162
19.6
1-5-3-6-2-4
non-reversible, fitted with wet oil sump internal combustion engine
Engine Type: WA6L16
Rated Pow er (kW): 660
Rated Speed (rpm ):1200
Maximum firing pressure (Bar): 200
Mean Indicated Pressure (MIP): 25.3
Bore x Stroke (mm): 160 x 250
Direct reversible, tw o stroke, single acting, turbocharged ,
uniflow scavenged , low speed , cross head type internal
see certificate for other cond itons.
for stationary purposes.
01/ 00162(E5)
Designed for operation on d iesel oil &
heavy fuel oil up to 700m m ²/ s (cSt) at
50°C.
Engine particulars at m axim um continuous rating:
Pow er(kW/ cylind er):
lightw eight w eb
5733
Bore(m m ):
Stroke (m m ):
Mean ind icated pressure bar:
RPM:
6, 7 8, 9, 10, 11, 12 & 14
stand ard w eb
5720
960
2500
136.6
19.7
102
312
Type
RT-flex 50-D
Details of Approval
Direct reversible, tw o stroke, single acting, turbo charged ,
uniflow scavenged , low speed , crosshead type, electronically
controlled com m on rail, internal com bustion engine w ith d irect
injection.
Application
operating on d iesel oil and
heavy fuel oil up to
700 m m 2/ s (cSt) @ 50°C
Rem arks
Cert. N o.
10/ 00041(E1)
approval.
313
Type
Details of Approval
Application
N o. of cylind ers:
Max. continuous pow er rating (kW/ cyl):
Speed (rpm ):
Winterthur Gas & D iesel Ltd.
...continued
RT-flex58T -B
RT-flex58T-D
RT-flex58T-E
RT-flex58T-B:
Max pow er rating (kW/ cyl):
Speed (rpm ):
RT-flex58T-D :
Speed (rpm ):
RT-flex58T-E:
Speed (rpm ):
W-X35
5 to 8 In-Line
1745
124
171
22.1
Direct reversible, tw o speed , single acting, turbocharged ,
uniflow , scavenged , low speed , crosshead internal com bustion
engine w ith d irect injection.
N o. of cylind ers:
Rem arks
5, 6, 7 or 8
Cert. N o.
10/ 00041(E1)
Main m arine propulsion and
for stationary purpose
d esigned for operation on
d iesel oil and heavy fuel oil up
to 700cSt (m m 2/ sec) at 50°C.
Main propulsion.
11/ 00010(E1)
approval.
2180
105
155
20.5
2260
105
161
20.2
2350
105
169
22.2
Speed (rpm ):
15/ 00029
5 to8
870
167 for R1
177
22.1 for R1
314
Type
G45
Details of Approval
Application
Speed (rpm ):
Main propulsion.
Rem arks
Cert. N o.
15/ 00056
5
1390.0
111.0
185
22
315
Winterthur Gas & D iesel Ltd.
...continued
Type
W-X 92
Details of Approval
Application
Speed (rpm ):
W-X82
W-X82-B
Cert. N o.
Main propulsion
15/ 00093
Main propulsion
16/ 00013
heavy fuel oil up to 700m m ²/ s
(cSt) @ 50°C
99/ 00143(E4)
6 to 9
6130
76 for R1
80 for R1+
180
22.2 for R1
21.1 for R1+
Speed (rpm ):
Rem arks
6 to 9
4750
76 for R1
84 for R1+
170
22.2 for R1
20.2 for R1+
uniflow scavenged , low speed , crosshead type, in -line internal
com bustion engine w ith d irect injection:
RTA84T-B
No. of cylinders:
Max. cont. power rating (kW/ cyl):
5, 6 or 7
3880 @ 74 rpm
140
19.1
RTA84T-D
No. of cylinders:
5, 6, 7, 8 or 9
4100 @ 76 rpm
144
19.6
316
Type
RT-flex 84T-D
Details of Approval
No. of cylinders:
Application
Rem arks
Cert. N o.
5, 6, 7, 8 or 9
4200 @ 76 rpm
151
20.1
317
Wärtsilä Finland Oy,
Tarhaajantie 2,
FI-65380 VAASA,
Finland.
Type
50DF
Details of Approval
Four Stroke Dual Fuel Internal Com bustion Engine:
N o. of cylind ers:
In-line:
Vee:
Max. continuous rating (kW/ cyl):
Maxim um Firing Pressure (bar):
Wärtsilä Finland Oy Industrial
Operation,
P.O. Box 244,
Jarvikatu 2-4,
Vaasa,
Finland.
L46 A / B / C / D
&
V46 A / B / C / D
In-line:
Vee:
Rem arks
Cert. N o.
11/ 00069(E2)
Main and auxiliary purposes
(not em ergency) in m arine
application
11/ 00067(E1)
6, 8 & 9
12, 16 & 18
950 @ 500rpm
975 @ 514rpm
170
22.2
Four stroke internal combustion engine:
No. of cylinders:
Application
6, 8 & 9
12, 16 & 18
46A:
Max. continuous power (kW/ cyl):
Speed (rpm):
905
180
450 / 500 / 514
27.8/ 25.0/ 24.3
46B:
Speed (rpm):
975
190
500 / 514
27.0/ 26.2
46C:
Speed (rpm):
1050
200
500 / 514
29.0/ 28.2
See certificate for cond itions of
approval.
318
Type
Details of Approval
46D:
Speed (rpm):
Application
Rem arks
Cert. N o.
1155
210
500 / 514
32.0/ 31.1
319
Wärtsilä Italia S.p.A.,
Bagnoli della Rosandra, 334,
San D orligo della Valle,
34018 Trieste,
Italy.
Type
L26B2
WA26
Details of Approval
Application
Reciprocating internal com bustion engine w ith 6, 8 and 9
cylind ers in-line
Max Continuous Pow er (kW/ cyliner)
Mean ind icted pressure
Maxim um firing pressure
Four stroke reciprocating internal com bustion engine w ith 12
and 16cylind ers in V-bank
Purpose
Main Propulsion, Auxiliary (not em ergy.)
4SCSA V-bank
V angle 55° consecutive firing
bore
12 and 16
stroke
Max. press. (bar)
MCR per Cylinder
(kW)
900rpm
1000rpm
m.i.p. (bar)
900rpm
1000rpm
Cert. N o.
in m od ule applications
00/ 00078(E3)
d rive in m arine applications
00/ 00158(E5)
900rpm
1000rpm
325
340
30 bar
210 bar
Wärtsilä
V26
Engine Type
N umber of
Cylinders
Engine Builder’s
D esignation
Rem arks
260m m
320m m
26A2
26D
26D2
26D3
26F
190
210
210
210
210
325*
340*
325*
340*
325*
340*
325*
340*
325
340
28.3
26.7
28.3
26.7
28.3
26.7
28.3
26.7
28.3
26.7
* as pum p d rive 300kW at 1000rpm (m .i.p = 23.5 bar), 900rpm
not applicable
320
Wärtsilä Italia S.p.A.
...continued
Type
WL46F
Details of Approval
Application
Reciprocating internal com bustion engine:
M aximum Cont inuous Rat ing
a t speed
M aximum Firing Pressure
M ean Indicat ed Pressure
13B
14B
15B
16B
L26B2
Speed (rpm ):
900
Max Continuous Pow er (kW/ cylind er): 325
28.3
210
Main and auxiliary m arine
applications
Expires: 2 May 2017
07/ 00021(E1)
in m arine applications
10/ 00016
Main propulsion or auxiliary
in m arine applications.
10/ 00022(E4)
1000
340
26.7
cylind ers in-line: bore 260m m ; stroke 320m m
Place of Prod uction
Wärtsilä Qiyao Diesel Com pany Ltd .
(Shanghai),
2988, Jiangshan Road ,
Lingang, N anhui,
Shanghai,
201306 P.R. China, Zip: 201306
900rpm
1000rpm
Max Continuous Pow er (kW/cylinder) 325
340
Mean ind icated pressure, bar
28.3
26.7
Maxim um firing pressure
210 bar
Wärtsilä
W38 B series and
W38CR series
Reciprocating internal com bustion engine w ith 12, 16 or 18
cylind ers:
N o. of cylind ers:
Speed (rpm ):
Vee angle:
Cert. N o.
1250 kW per cy linder
600 rpm
230 bar
29.7 bar
cylind ers in-line: bore 260m m ; stroke 320m m
WL26B2, WL26D,
WL26D2, WL26D3,
WL26F and WA26
Rem arks
for m arine applications
Expires: 4 May 2015
11/ 00027
12, 16 & 18
600
725
210
29.6
50°
321
Wärtsilä Italia S.p.A.
...continued
Type
V46F A2/ A4/ A6
Details of Approval
Application
12, 14 and 16 Vee type four stroke internal com bustion engine
Rem arks
Cert. N o.
11/ 00053(E2)
Marine m ain propulsion, for
operation on d iesel oil and
heavy fuel oil of up to 730
m m 2/ s (cSt) at 50°C.
01/ 00008(E3)
700 m m 2/ s (cSt) @ 50°C
Function: Propulsion/ Auxiliary
Pow er (kW):
1200kW per Cylind er
Speed (rpm ):
600
Max. press. (bar): 230
m .i.p. (bar):
27.7
Wärtsilä Sw itzerland Ltd,
PO Box 414,
CH-8401 Winterthur,
Sw itzerland.
RTA68D
RT-flex68D
uniflow scavenged , low sp eed , crosshead type internal
com bustion engine w ith d irect injection:
N o. of cylind ers:
Pow er (kW/ cyl):
Speed (rpm ):
RT-flex 50-B
5 to 8
3130
159
21.2
95
uniflow scavenged , low speed , crosshead type, electronically
controlled com m on rail, internal com bustion engine w ith d irect
injection.
N o. of cylind ers:
Speed (rpm ):
W5-8X40
approval..
Reciprocating Internal Combustion Engine
07/ 00003(E2)
approval.
5 to 8 In-Line
1660
124
159
21
13/ 00084
approval.
322
Type
Details of Approval
N o. of cylind ers:
Speed (rpm ):
Application
Rem arks
Cert. N o.
5 to 8 In-Line
1135
146
176
21.5
323
Wärtsilä Sw itzerland Ltd
...continued
Type
W-X72
Details of Approval
Speed (rpm ):
W-X62
Application
Main propulsion.
14/ 00054(E2)
Main propulsion.
15/ 00006
for stationary purposes.
Designed for operation on d iesel oil &
heavy fuel oil up to 700m m ²/ s (cSt) at
50°C.
96/ 00120(E2)
5 to8
2660
97 for R1
103 for R1+
168
21.6 for R1
20.5 for R1+
RTA 62U
uniflow scavenged , low speed , cross head type internal
F
Engine particulars at m axim um continuous rating:
Pow er(kW/ cylind er):
Bore(m m ):
Stroke (m m ):
Mean ind icated pressure bar:
RPM:
Cert. N o.
5 to7
3610
84 for R1
89 for R1+
168
21.7 for R1
20.5 for R1+
Speed (rpm ):
Rem arks
4, 5, 6, 7, & 8
2285
620
2150
144
19.4
115
324
Wärtsilä Sw itzerland Ltd.,
PO Box 414,
CH-8401 Winterthur,
Sw itzerland.
Type
RT-flex60C
RT-flex60C-B
Details of Approval
uniflow scavenged , low speed , crosshead type internal
Application
700 m m 2/ s (cSt) @ 50°C
Rem arks
Cert. N o.
03/ 00089(E2)
approval.
325
Type
Details of Approval
N o. of cylind ers:
Maxim um Com bustion Pressure (bar):
Maxim um Continuous Rating per cylind er (kW):
at Speed (rpm ):
Wärtsilä Sw itzerland Ltd.
...continued
RTA 82T
RT-flex 82T
Cert. N o.
03/ 00089(E2)
09/ 00039(E2)
10/ 00017(E1)
4520
76
159.0
21.2
Firing Ord er:
6 cylind er
7 cylind er
8 cylind er
9 cylind er
10 cylind er
11 cylind er
12 cylind er
Rem arks
5 to 9
159
21.1
2420
114
Firing Ord er:
6 cylind er 1-5-3–4–2–6
7 cylind er 1–6–3–4–5–2–7
8 cylind er 1–6–5–2–7–4–3–8
9 cylind er 1–6–7–3–5–8–2–4-9
Maxim um continous pow er, kW/ cylind er
Speed (rpm )
RTA/ RT-flex 82C
Application
1-5-3–4–2–6
1–6–3–4–5–2–7
1–6–5–2–7–4–3–8
1–6–7–3–5–8–2–4-9 or reverse
1-9-7-2-6-8-4-3-10-5 only
1-6-11-4-3-7-10-2-5-9-8 only
1-9-11-4-3-8-10-6-2-7-12-5 only
Maxim um continous pow er (kW/ cylind er):
Speed (rpm ):
Maxim um com bustion pressure (bar):
21.1
4520
97
159
326
Type
RTA 48T-D
RT-flex 48T-D
Details of Approval
Application
Firing Ord er:
5 cylind er 1–4–3–2–5
6 cylind er 1-5-3–4–2–6
7 cylind er 1–6–3–4–5–2–7
8 cylind er 1–8-3-4-7-2-5-6
Maxim um continous pow er, kW/ cyl.
Speed (rpm )
Marine Main Propulsion
Rem arks
Cert. N o.
99/ 00045(E6)
1455
127
160
20.1
327
Yanmar Co Ltd,
Tsukaguchi Plant,
5-3-1, Tsukaguchi Honmachi,
Amagasaki-city,
Hyogo-Pref, 661-0001,
Japan.
Yanmar Co., Ltd.,
Tsukaguchi Plant,
5-3-1, Tsukaguchi Honmachi,
Amagasaki-city,
Japan.
Type
Details of Approval
6HA(L)2 series:
6HAL2-N, -TN,
-HTN, -DTN, -WT,
-WHT & -WDT
(for auxiliary
power generation)
4-stroke, direct injection, single acting, six cylinder, in-line, trunk
piston type diesel engine
6HA2M-HTE,
-DTE, -WHT &
-WDT (for main
propulsion)
6H A2M m ain propulsion m od el:Rated pow er (brake) (kW)
Engine speed (rpm )
Maxim um firing pressure (MPa)
Mean ind icated pressure (MPa)
12AYM-WGT,
12AYM-WET,
12AYM-WST
4-stroke, direct injection, single acting Vee type trunk piston, diesel
engine
Application
Rem arks
Cert. N o.
auxiliary power generation
13/ 10093
Marine propulsion for m ulti
engine installations
12/ 10064
6H AL2auxiliary pow er generation m od el:Rated pow er (brake) (kW)
: 90 ~ 305
Engine speed (rp m )
: 1200/ 1500/ 1800
Maxim um firing pressure (MPa)
: 7.35 ~ 12.75
Mean ind icated pressure (MPa)
: 0.83 ~ 1.70
: 204/ 257/ 298
: 1880/ 1950/ 1950
: 11.77
: 1.10/ 1.33/ 1.53
Engine particulars :-
N um ber of cylind ers : 12 in 90° Vee
Rated power (brake) (kW) :
1340 at 1940 rpm
1220/ 1140 at 1900/ 1840 rpm
1030/ 882 at 1900/ 1850 rpm
Engine speed (rpm) : 1940, 1900/ 1840, 1900/ 1850
Maximum firing pressure (MPa) :
15.5, 15.3/ 15.0, 14.0/ 13.0
Mean indicated pressure (MPa) :
2.18, 2.04/ 1.97, 1.75/ 1.55
328
Product: Engine Components (Part 1A)
Type
Ltd.,
Engine and Machinery
D ivision,
1000, Bangeojinsunhw an-doro,
D ong-gu,
Ulsan, 682-792,
Korea, Republic of.
HiMSEN H27DF
MT Sealing Technology Inc.,
Aspstrasse 8,
CH-8472 Ohringen,
Sw itzerland.
HERSS-Non metallic
piston rod sealing
system incorporating
A5P scrapers.
Details of Approval
Internal combustion dual-fuel engine with a common rail pilot fuel
injection system
Application
Rem arks
Cert. N o.
15/ 40043
N on m etallic scraper and seal
rings for piston stuffing boxes,
for m arine, offshore and
ind ustrial tw o stroke d iesel
engines (original, w orn, reground and recond itioned
piston rod s)
01/ 00140(E2)
N um ber of cylind ers
: 6, 7, 8 and 9 in -line
: 228/ 237/ 285/ 310
Engine speed (rpm )
: 720/ 750/ 900/ 1000
Maxim um firing pressure (bar) : 163 bar for d iesel m od e
180 bar for gas m od e
Mean ind icated pressure (bar) : 22.45 bar at 720, 750, 900 rpm
22.0 bar at 1000 rpm
Stuffing box non m etallic scrap er and seal rings
approval
329
Product: Engine Mountings (Part 1A)
Chock D esign B.V.,
P.O. Box 121,
2980 AC RID D ERKERK,
N etherlands, The.
Type
RC3
RC4
RC4.5
RC5
RC6
RC7
Details of Approval
Application
Rem arks
Cert. N o.
RotaChock ACE Ad justable Steel Chock (St. 52.3); and
RotaChock Slim Line Ad justable Steel Chock (42CrMo4)
Ad justable Steel Chock for
m ain and auxiliary engines
and equipm ent of ships
See certificate and Design Appraisal
lim itations.
13/ 30001
As torsional vibration dampers
for main and auxiliary diesel
engines
00/ 20001(E3)
Resilient m ountings for
engines, com pressors, pum ps,
generator sets, control cabins
and living quarters, subjected
to the specified operational
lim itations
lim itations.
RC8
RC9
RC10
RC4-SL
RC5-SL
RC7-SL
Hasse & Wrede GmbH,
George-Knorr-Straße,
12681 Berlin,
Germany.
AA, AL, AP, AM,
AU, GG, FV, HA,HB,
HE, HF, ND, HV, TI
Torsional vibration dampers
Loggers Rubber Techniek B.V.,
P.O. Box 194,
3300 AD D ordrecht,
N etherlands, The.
Evolo 633
Conical rubber-m etal elem ents (resilient anti-vibration
m ountings).
Static and Dynam ic load s (kN ): 23 to 115
Shockload s (kN ):
 200
Tem perature C:
Continuous am bient:
-20/ +80
Size and types of dampers to be in
accordance with the producer’s
instructions and recommendations
01/ 30009(E3)
330
Rubber D esign B.V.,
P.O. Box 15,
2995 ZG Heerjansdam,
N etherlands, The.
Type
RD 112 & RD 113,
RD 114 &, RD 115 &
RD 114X
RD 214 &, RD 215
RD 244 & RD 214X
RD 314 & RD 315
RD 414 & RD 415
MP2, MP3, MP4 &
MP5
Details of Approval
Conical and Sand w ich rubber-m etal elem ents (resilient antivibration m ountings)
Application
Resilient mountings for main
engine, auxiliary engine,
generator installations, gear
boxes, exhaust gas boilers and
silencers suspension of
deckhouses, accommodation
rooms, control cabins and other
applications, subject to the
specified operational
limitations
Rem arks
Cert. N o.
04/ 30007(E2)
Docum ent for d etails
VRD 34 L1 & VRD 35
S1,
VRD 35 M1 & VRD
35 L1
TT1 & TT2 & TT3
331
Type
SKF Solution Factory - Marine
Services,
N ikkelstraat 7,
Ridderkerk, 2984 AM,
N etherlands, The.
SM
SM
SM
SM
SM
12, SM
20, SM
30, SM
42, SM
56, SM
16,
24,
36,
48,
64,
Trelleborg Industrial AVS,
1 Hoods Close,
Leicester, LE4 2BN ,
Cushyfloat
(includ ing H D, H T)
Cushym ount
(includ ing K, XK)
Cushyfoot S,K
Details of Approval
Vibracon SM Ad justable Steel Chock (St. 52.3 or Ck 45)
Anti-vibration chocks, anti-shock and vibration m ounts
Sand w ich Mount
D-, DX- and Super
D- Series
Equifrequency
Mounts
Application
Flexible anti-vibration rubber
chocks for diesel engines for
main propulsion and auxiliary
duty, and as mountings for
reduction gearboxes and other
auxiliary machinery,
in accordance with the
limitations in the
manufacturers data sheets.
Anti-vibration mounts for the
following marine and
industrial uses:
96/ 00041(E4)
04/ 00001(E4)
2.
3.
4.
Resilient
Mounts
Conical anti vibration m ounts
Rubber hard ness range (Sh(A)):
AVC/ T/ TR
AVC/ 2/ S
AV/ C/ 3/ L
AVC/ 5/ S
AVC/ 2/ L
AV/ C/ 4/ S
AVC/ 5/ L
AV/ C/ 3/ S
AV/ C/ 4/ L
T35
T35-H A
T35-H A-DS
T35-CB
T50
T50-CB
T50-ST
T50-H A
45 to 70
Cert. N o.
Ad justable Steel Chock for
m ain and auxiliary engines
and equipm ent of ships
1.
Vulkan Italia S.r.l,
Via dell'Agricoltura, 2,
15067 N ovi Ligure (AL),
Italy.
Rem arks
00/ 30008(E4)
lim itations.
Main & auxiliary
engines
Com pressor sets
Ancillary equipm ent
Rail locom otives
Flexible anti vibration chocks
for d iesel engines for m ain
propulsion and auxiliary d uty,
and as m ountings for
red uction gearboxes and other
auxiliary m achinery, in
m anufacturer’s d ata sheets.
approval.
332
Type
Details of Approval
T50-H A-DS
T50-DH
T60
T60-CB
T60-H A-DS
T60-ST
T60-H A
T75
T75-CB
T75-H A-DS
T75-ST
T75-DH
T75-H A
T90
T90-CB
T90-H A-DS
T90-ST
T90-DH
T90-H A
T140
T140-CB
T140-H A-DS
T140-ST
T140-H A
T200
T200-H A
T230
T230-CB
T230-H A
T230-H A-DS
MG-DN P
MG-DN P-10
MG-DN P-40
MG-DN P-120
MG-DN P-270
MG-DN P-20
MG-DN P-60
MG-DN P-150
MG-DN P-360
MG-DN P-30
MG-DN P-90
MG-DN P-180
MG-DN P-500
MG-DP
MG-DP-60
MG-DP-150
MG-DP-360
MG-DP-90
MG-DP-180
MG-DP-500
MG-DP-120
MG-DP-270
HT
HT 1
HT 3
H T 11
RC
RC-150
RC-1000
RC-300
RC-2000
RC-500
Vulkan Italia S.r.l ...continued
Application
Rem arks
Cert. N o.
04/ 00001(E4)
333
Type
Details of Approval
VD
VD-10
VD-20
VDM
VDM-160
VDM-784
VDM-13602
VDM-782
VDM-786
VDM-13604
Application
Rem arks
Cert. N o.
VDM-783
VDM-13600
Shock Mounts
AV/ ZA40S &SM-12-
334
Vulkan Italia S.r.l ...continued
Type
Details of Approval
50-F
AV/ ZA40S
SM-12-50-F
SM-19
SM/ 19/ 22/ F
SM/ 19/ 27/ F
SS-50
SS/ 50/ --F
SM/ 50/ --F
Application
Rem arks
Cert. N o.
04/ 00001(E4)
SL/ 50/ --F
335
Product: Fuel Systems (Part 1A)
L'Orange GmbH,
Porschestraße 30,
70435 Stuttgart,
Germany.
Type
Details of Approval
Application
Fuel Injection System
for MTU 20V 8000-01
for MTU 20V 8000-01
Diesel Engines
Including high
pressure pumps PDO
G029 and PDO G030,
fuel
injection valves
VUO-G254, VUOG256, VUO-G292
VUO-G293, VUOG301 and VUO-G302
safety valve PDOU069 and single
accumulator VUOU288
Electronically controlled common rail fuel injection system for
marine diesel engines
MDO Fuel
Injection System for
MTU
Series 4000-01, 400002 and 4000-03 Diesel
Engines including
high pressure pumps
DCO-G001,
DCO-G003,
PCO G044,
PCO G045,
PCO G046,
PCO G066,
fuel injector
VTO-G205
Electronically controlled common rail fuel injection system for
marine diesel engines.
Rating:
34 liter/ min output at 1800 bar rail pressure (MDO 2.6 cSt)
RATINGS:
Engine
Type
4000-01
4000-02
4000-03
Pump
Pump
Sopeed
[repm]
DCO-G001 3000
DCO-G003
PCO-G046 3150
PCO-G044
PCO-G045
PCO-G066
Fuel
Quantity
[litre/ min]
8
16.5
31
30
15
30
Pressure
Rem arks
Cert. N o.
As fuel injection system at
MTU engines, Series 8000-01,
intend ed for Classification
w ith Lloyd ’s Register.
08/ 20042 (E2)
As fuel injection system at
MTU diesel engines, Series
4000-01, 4000-02 and 4000-03,
on ships
and offshore installations
Register.
98/ 20073(E5)
[bar]
1400
1800
336
Type
Details of Approval
Application
Rem arks
Cert. N o.
Qinhuangdao Fullshine
Marine Repair & Service Co
Ltd,
Kaiyuan Road, Shanhaiguan
Lingang Industrial Park,
Qinhuangdao 066200,
Hebei Province, 066200,
F-S-000F series
F-S-000R series
Fuel oil drip sampler
FS-S-080F, 100F, 125F, 150F, 200F, 250F & 300F
FS-S-075R, 100R, 125R, 150R, 175R, 200R, 225R, 250R, 275R & 300R
Nominal sizes (mm): 80~300
Pressure rating (Bar): 5~20
Manual valve setting
continuous-d rip sam pler to
take the sam pling of fuel oil
for d eterm ination of
com pliance w ith Annex VI of
revised MARPOL 73/ 78
See other cond itions ind icated in
certificate.
14/ 80007(E1)
S.I.T Schiffs-& Industrie
Technik GmbH,
Friedensallee 128,
22763 Hamburg,
Germany.
CD92 - SR / CI /
WiDE / WOR / MBP
CD2 Micronizer System (Homogenizer) with magnetic coupling for
treatment of HFO / DO.
As oil fuel treatment processor
installations
Register.
04/ 20014(E2)
Ratings:
a)
Max capacity:
Max pressure:
Max temperature:
25 m3/ hr
16 bar
150°C
Oil fuel type:
heavy fuel oil IFO 180 – 380 cSt/ 50°C ;
marine diesel oil
Supply:
400/ 440V; 50/ 60 Hz; IP54
Homogenisation of
inhomogeneous and
incombustible structures
b)
Forming non-mineral
and non-metallic particles in
sizes below 0,5mm
c) Diminishing of reagglomeration of hydro
carbons (asphaltenes) leading
to fuel utilization/
improvement
d) Significant reduction
of sludge formation (up to
85%) Generation of a long
stable water-in-diesel fuelemulsion
337
W. Lösing Filtertechnik,
Am Walzw erk 2,
Hattingen, 45527,
Germany.
Type
“Separ 2000”
Details of Approval
Water separator and light diesel fuel oil filter. Filtering and water
separation be achieved by a cartridge and a centrifugal system.
Housing from aluminium alloy with metal bowl with water level
indication contacts. Flow capacity between 5 and 130 l/ min.
Application
Filters for light diesel fuel oil
installed in the suction side
between fuel oil tank and
delivery pump on ships
Register.
Rem arks
Cert. N o.
94/ 20036 (E4)
338
Product: Gas Turbine Engines (Part 1A)
GE Marine Engines,
1 N eumann Way,
Cincinnati,
Ohio, 45215,
(USA).
Type
Com m ercial Marine/
N aval Gas Turbine
Engine
Type
LM2500
LM2500(+)
LM2500(+G4)
Details of Approval
1. Machinery
Turbine Type Designation
Mod el LM2500
Mod el LM2500(+)
Mod el LM2500(+G4)
Gas Turbine
See Certificate
Pow er Rating
2.Liquid Fuel System
F.O. Pum p Discharge Pressure, bar
Design Pressure, bar
Test Pressure, bar
3.Lubricating Oil System s
Operating Pressure, bar
Design Pressure, bar
Test Pressure, bar
General Electric International
Inc,
One N eumann Way,
Cincinnati,
Ohio,
(USA).
Gas Turbines
Rolls Royce plc,
N eptune House,
PO Box 3,
Filton,
Bristol, BS34 7QE,
MT30
Application
Cert. N o.
09/ 60015(E2)
15/ 60017
a. Electrical Pow er
Generation:
Variable load - constant
pow er turbine sped
50
62.5
75
Lubricating Oil
Supply System
4.5
5.63
8.45
application as follow s
Rem arks
LO Scavenge
System
3.4
4.25
6.4
LM 6000-PC and LM 6000-PG
b. Mechanical Drive:
Variable load – variable
pow er turbine speed
LM 6000-PC and LM 6000-PG
Refer to Certificate 15/ 60017 for
limitations.
Marine gas turbine:
MT3036B01 (mechanical drive):
Pow er rating (MW):
Speed (rpm ):
Inlet air tem p. range (°C):
(Red uced pow er available up to 52°C)
applications.
11/ 00003(E2)
36
2800 to 3600
– 40 to +38
339
Type
Details of Approval
Application
Rem arks
Cert. N o.
MT3036B02 (electrical drive):
Pow er rating (MW):
36
Speed (rpm ):
3528 to 3636
– 40 to +38
340
Type
Rolls Royce plc ...continued
Siemens Industrial
Turbomachinery Ltd,
PO Box 1,
Waterside South,
Lincoln, LN 5 7FD ,
Details of Approval
MT3040B01 (mechanical drive):
Pow er rating (MW):
Speed (rpm ):
SGT100-1S
SGT100-2S
Rem arks
Cert. N o.
11/ 00003(E2)
40
2800 to 3600
– 40 to +38
Gas Turbines:
Power ratings (MW):
SGT100-1S:
SGT100-2S:
Maximum gas supply pressure (bar):
Gas system design pressure (bar):
Test pressure for gas system (bar):
Fuel oil pump discharge pressure (bar):
Fuel oil system design pressure (bar):
Fuel oil system test pressure (bar):
VGV control system supply pressure (bar):
VGV control system design pressure(bar):
VGV control system test pressure (bar):
Lubricating oil system supply pressure (bar):
Lubricating oil system design pressure (bar):
Lubricating oil system test pressure (bar):
Starter motor system supply pressure (bar):
Starter motor system design pressure (bar):
Starter motor system test pressure (bar):
SGT 300-2S
Application
Mechanical Drive Twin Shaft Gas Turbine
Power rating (kW) 9100 kW at 11500 rpm
5.4
5.7
20.7
25.9
38.8
99.2
124
186
75.9
94.9
142.3
5.5
6.9
10.4
40
50
75
Power generation in combined
cycle, petrochemical, pipeline,
fixed and mobile offshore unit
applications and marine heat
and power (non direct
propulsion) applications.
00/ 00164(E3)
Pow er Generation
Mechanical Drive
15/ 00046
341
Type
SGT-300-1S
Details of Approval
Gas Turbine
Pow er rating
7900 @ 14045 rpm
Max. gas supply pressure (bar):
28
Gas system d esign pressure (bar):
34
Fuel oil d ischarge d esign pressure (bar):
80
Fuel oil d ischarge d esign pressure (bar):
125
Lubricating oil system supply pressure (bar):
5.5
Lubricating oil system d esign pressure (bar):
7.6
Starter m otor system supply pressure (bar):
30
Starter m otor system d esign pressure (bar):
420
Application
Pow er generation in
com bined cycle,
petrochem ical, pipeline, fixed
and m obile offshore unit
applications and m arine heat
and pow er (non-d irect)
applications.
Rem arks
Cert. N o.
99/ 00069(E4)
342
Product: Propulsion Units (Part 1A)
Sykes Marine (Hydromaster)
Ltd.,
Fleet House,
Motherw ell Way,
West Thurrock,
Essex, RM20 3XD ,
Type
150 H P
Details of Approval
‘Z’ d rive Marine Propulsion Unit:
Max. input pow er rating (kW):
Propeller speed (rpm ):
Application
For m arine propulsion and
steering of com m ercial craft
Rem arks
Cert. N o.
98/ 00079(E3)
111.9 at 2100 rpm
523
343
Product: Reduction Gear (Part 1A)
Type
Details of Approval
Application
Marine internal combustion engine
Caterpillar Griffin,
560 Rehoboth Road,
Griffin,
Georgia 30224,
(USA).
C9.3
Main Propulsion, marine
generator set for auxiliary and
emergency purposes, in
accordance with the
Conditions of Approval listed
in LR’s Design Appraisal
Document No. ENG 19587915,
issue 1.
Main Propulsion
Pow er
Speed
(kW)
(rpm )
280
1800
310
2100
355
2300
BMEP
(bar)
20.1
19.0
19.9
IMEP
(bar)
23.0
21.1
22.2
Max Firing
Press. (bar)
172
172
189
Generator Ratings
Rating
Pow er
(H z)
(kW)
50
218
50
270
Speed
(rpm )
1500
1500
BMEP
(bar)
18.8
23.2
IMEP
(bar)
21.2
26.0
Max Firing
Press. (bar)
189.2
189.2
60
60
1800
1800
19.7
23.3
23.1
25.3
189.2
189.2
275
325
Rem arks
Cert. N o.
15/ 00035
Optional Generator
Fram e
LC6134B
LC6134D
LC6134B
LC6134D
344
Type
Details of Approval
Application
Marine generator set
Caterpillar Inc.,
3701 South Street,
(USA).
C4.4 ACERT
PERKIN S
1204D-E44TA
Marine generator set for
auxiliary and em ergency
purposes, in accord ance w ith
the Cond itions of Approval
listed in LR’s Design
Appraisal Docum ent N o.
EN G 18284135, issue 1
Rating
(H z)
50
50
50
Pow er
(kW)
99
80
65
Speed
(rpm )
1500
1500
1500
BMEP
(bar)
19.8
15.8
12.8
IMEP
(bar)
21.3
17.2
14.1
Max Firing
Press. (bar)
170
170
170
60
60
60
60
118
99
75
60
1800
1800
1800
1800
19.5
16.5
12.3
9.9
21.3
18.1
13.8
11.3
170
170
170
170
Rem arks
Cert. N o.
15/ 00017(E1)
(Assembly)
Wimborne Marine Pow er Centre
22 Cobham Road
Ferndow n Industrial Estate
Wimborne
D orset, BH21 7PW
United Kingdom
Perkins Engine
Frank Perkins Way
Eastfield
Peterborough
Cambridgeshire, PE1 5N A
United Kingdom
PRM Marine Ltd.,
Barlow Road,
Coventry, CV2 2LD ,
PRM 1500
Marine propulsion transm ission gearing for sm all craft
Input speed (rpm ):
2500
Main propulsion transm ission
gearing for sm all craft (no ice
rating), in accord ance w ith the
Cond itions of Aprpoval listed
Docum ent N o.EN G 14746650
13/ 00096
345
Type
Details of Approval
Ratio:
1.22
1.56
1.94
2.25
2.45
3.00
3.1
3.9
4.5
4.9
REIN TJES GmbH,
Eugen-Reintjes-Straße 7,
31785 Hameln,
Germany.
WAF/ LAF
542/ 542L
562/ 562L/ 562L1
Pow er (kW):
(Continuous)
340
340
340
340
340
288
340
340
314
288
Application
WAF/
WAF/
WAF/
WAF/
WAF/
WAF/
LAF 542/
LAF 542/
LAF 542/
LAF 542/
LAF 542/
LAF 542/
542L
542L
542L
542L
542L
542L
WAF/
WAF/
WAF/
WAF/
LAF 562/
LAF 562/
LAF 562/
LAF 562/
562L/
562L/
562L/
562L/
562L1
562L1
562L1
562L1
Cert. N o.
Pow er (kW):
(Variable)
366
366
366
366
366
327
366
366
366
314
Marine reverse red uction gear
Type
Rem arks
Ratio
Pow er
[kW]
Max Speed
[rpm ]
2.269
2.542
2.960
3.542
3.955
4.450
1197
1197
1197
1197
1178
987
2100
2100
2100
2100
2100
2100
4.545
5.050
5.421
5.947
1197
1197
1197
1092
2100
2100
2100
2100
For m ain propulsion purposes
on ships classed or intend ed
for classification w ith Lloyd ’s
Register w ithout ice class
notations.
05/ 20014(E3)
346
Type
WVS 930/ 1
Details of Approval
Application
Marine reverse red uction gear
Type
Ratio
WVS 930/ 1
WVS 930/ 1
WVS 930/ 1
1.271
1.550
2.241
Power
(kW)
2520
2946
2520
WVS 930/
WVS 930/
WVS 930/
WVS 930/
WVS 930/
2.357
2.481
3.429
3.542
3.955
2490
2520
2080
1780
1640
1
1
1
1
1
Max Speed
(rpm)
2100
2100
2100
MGX-6690SC
Red uction
Ratio
1.51:1
1.88:1
2.03:1
2.37:1
2.47:1
2.93:1
3.21:1
`
Interm ed iate
Duty
1800
2100
RPM
RPM
1201kW
1380kW
1201kW
1380kW
1201kW
1380kW
1201kW
1380kW
1201kW
1380kW
1201kW
1318kW
1201kW
1280kW
Med ium
Duty
1600
RPM
1054kW
1054kW
1054kW
1054kW
1054kW
1034kW
1018kW
Cert. N o.
For m ain propulsion purposes
for classification w ith Lloyd ’s
Register w ithout ice class
notations.
Expires: 9 May 2015
05/ 20028(E3)
General m arine propulsion in
in LR Design Sppraisal
Docum ent EN G 12967353.
13/ 00048
2100
2100
2100
2100
2100
General m arine propulsion
Tw in D isc Incorporated,
4600 21st Street,
Racine,
WI, 53405,
(USA).
Rem arks
1800
RPM
1174kW
1174kW
1174kW
1174kW
1174kW
1144kW
1119kW
Continuous
Duty
1600
1800
RPM
RPM
1017kW 1129kW
1017kW 1129kW
1017kW 1129kW
1017kW 1129kW
1017kW 1129kW
977kW 1069kW
943kW 1028kW
347
Type
MGX-6848SC
Red uction
Ratio
1.51:1
1.88:1
2.03:1
2.47:1
2.58:1
2.93:1
3.21:1
ZF Padova S.r.l.,
Street Penghe 48,
35030 Caseele di Selvazzano
(Padova),
Italy.
ZF305-3A
(Dow n Angle)
Details of Approval
Interm ed iate
Duty
1800
2100
RPM
RPM
1342kW
1566kW
1342kW
1566kW
1342kW
1566kW
1342kW
1566kW
1342kW
1566kW
1342kW
1566kW
1269kW
1453kW
Med ium
Duty
1600
RPM
1187kW
1187kW
1187kW
1187kW
1187kW
1187kW
1103kW
1800
RPM
1342kW
1342kW
1342kW
1342kW
1342kW
1342kW
1226kW
Application
Constant
1.2:1
1.514:1
1.733:1
2.037:1
2.179:1
2.423:1
Light Duty
kW @
522
522
522
522
483
435
387
rpm
2800
2800
2800
2800
2800
2800
2800
Cert. N o.
Continuous
Duty
1600
1800
RPM
RPM
1111kW 1250kW
1111kW 1250kW
1111kW 1250kW
1111kW 1250kW
1111kW 1250kW
1111kW 1250kW
1074kW 1194kW
Marine Reverse Red uction Gearbox
Pow er Ratings in accord ance w ith the Rules and Regulations for
the Classification of Sp ecial Service Craft
Ratio
Rem arks
Med ium
kW @
398
398
398
398
398
365
342
Duty
rpm
2800
2800
2800
2800
2800
2800
2800
gearing for vessels w ith no ice
rating, in accord ance w ith the
Docum ent N o..EN G 11071861.
12/ 00067
348
Type
Details of Approval
Application
Rem arks
Cert. N o.
Pow er Ratings in accord ance w ith the Rules and Regulations for
the Classification of Ships 2011
Ratio
Continuous Duty
kW @
rpm
Constant
1.2:1
1.514:1
1.733:1
2.037:1
2.179:1
2.423:1
311
311
311
311
311
277
273
2400
2400
2400
2400
2400
2400
2400
ZF 665
Ratio
1.000:1
(input)
1.111:1
1.182:1
1.262:1
1.400:1
1.500:1
1.743:1
2.000:1
2.233:1
2.593:1
3.042:1
Pleasure D uty
kW @ rpm
Light D uty
kW @ rpm
Medium D uty
kW @ rpm
Continuous D uty
kW @ rpm
1065
1130
1130
1130
1130
1130
1130
1130
1130
1139
914
914
970
970
970
970
970
970
970
949
949
758
652
714
714
714
714
714
714
714
667
667
548
522
609
609
609
609
609
609
609
565
565
470
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2300
2300
2300
2300
2300
2300
2300
2300
2300
2300
2300
12/ 00068
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
349
Type
ZF 665A & ZF 665V
Details of Approval
Ratio
1.000:1
(input)
1.525:1
1.757:1
1.971:1
2.219:1
2.226:1
2.448:1
2.517:1
2.960:1
ZF 305-3 (Parallel
Offset)
Application
Pleasure D uty
kW @ rpm
Light D uty
kW @ rpm
Medium D uty
kW @ rpm
Continuous D uty
kW @ rpm
1065
1130
1130
1130
1095
1130
1081
1012
915
914
970
970
970
970
949
949
927
758
652
714
714
714
667
667
667
647
572
522
609
609
609
564
564
564
556
497
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2300
2300
2300
2300
2300
2300
2300
2300
2300
Rem arks
Cert. N o.
2100
2100
2100
2100
2100
2100
2100
2100
2100
13/ 00022
Pow er Ratings – In accord ance w ith Special Service Craft Rules
2012
Ratio
Constant
0.884:1
0.923:1
1:1
1.220:1
1.297:1
1.486:1
Light Duty
kW @
643
643
643
643
658
658
658
3000
3000
3000
3000
3000
3000
3000
Med ium Duty
kW @
rpm
rpm
522
522
522
522
522
522
522
2800
2800
2800
2800
2800
2800
2800
398
398
398
398
398
398
398
2800
2800
2800
2800
2800
2800
2800
350
Type
Details of Approval
1.758:1
1.968:1
2.250:1
2.500:1
2.917:1
658
616
541
488
420
3000
3000
3000
3000
3000
522
498
436
375
303
2800
2800
2800
2800
2800
Application
398
398
365
342
303
Rem arks
Cert. N o.
2800
2800
2800
2800
2800
Pow er Ratings – In accord ance w ith Ship Rules 2012
Ratio
Continuous
Duty
kW @ rpm
Constant
311
2400
0.884:1
311
2400
0.923:1
311
2400
1:1
311
2400
1.220:1
311
2400
1.297:1
1.486:1
1.758:1
1.968:1
2.250:1
2.500:1
2.917:1
311
311
311
311
273
273
243
2400
2400
2400
2400
2400
2400
2400
Docum ent N o..EN G 5315672
issue 2.
13/ 00071
351
Type
ZF 286
ZF 286A
Details of Approval
Application
Ratio
Pleasure D uty
kW @ rpm
Light D uty
kW @ rpm
Medium D uty
kW @ rpm
Continuous D uty
kW @ rpm
0.923:1
1.000:1
1.237:1
1.400:1
1.500:1
1.774:1
1.966:1
2.269:1
2.481:1
2.917:1
542
542
566
566
566
522
488
437
384
344
417
417
433
433
433
433
414
371
326
292
295
295
323
323
323
323
323
323
295
269
230
230
251
251
251
251
251
251
230
210
Ratio
Pleasure D uty
kW @ rpm
Light D uty
kW @ rpm
Medium D uty
kW @ rpm
Continuous D uty
kW @ rpm
1.200:1
1.333:1
1.484:1
1.750:1
1.962:1
2.208:1
2.391:1
2.500:1
566
566
531
475
438
402
380
367
433
433
433
403
372
330
300
285
323
323
323
323
323
304
281
281
251
251
251
251
251
217
217
217
3300
3300
3300
3300
3300
3300
3300
3300
3300
3300
3300
3300
3300
3300
3300
3300
3300
3300
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
Rem arks
Cert. N o.
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
issue 1.
13/ 00072
352
Type
ZFW 325
Details of Approval
Application
Rem arks
Cert. N o.
Pow er Ratings in accordance w ith the Rules and Regulations
for the Classification of Ships
Ratio
2.933:1
3.407:1
3.958:1
4.409:1
4.913:1
5.167:1
Medium D uty
kW @ rpm
469
2400
469
2400
469
2400
430
2400
371
2400
345
2400
Continuous D uty
kW @ rpm
398
2400
398
2400
398
2400
368
2400
306
2400
298
2400
for the Classification of Special Service Craft
Ratio
2.933:1
3.407:1
3.958:1
4.409:1
4.913:1
5.167:1
Medium D uty
kW @ rpm
469
2400
469
2400
469
2400
430
2400
371
2400
345
2400
Continuous D uty
kW @ rpm
398
2400
398
2400
398
2400
368
2400
306
2400
298
2400
issue 1.
13/ 00073
353
Type
ZFW 320
Details of Approval
Application
Rem arks
Cert. N o.
for the Classification of Ships
Ratio
2.958:1
4.048:1
4.526:1
4.950:1
Medium D uty
kW @ rpm
408
2300
376
2300
343
2300
306
2300
Continuous D uty
kW @ rpm
306
2100
223
2100
200
2100
183
2100
for the Classification of Special Service Craft
Ratio
2.958:1
4.048:1
4.526:1
4.950:1
Medium D uty
kW @ rpm
408
2300
376
2300
343
2300
306
2300
Continuous D uty
kW @ rpm
306
2100
223
2100
200
2100
183
2100
Docum ents N o..EN G 2009213,
issue 02 & EN G2392225, Issue
2.3
14/ 00046(E1)
354
Type
ZF 360
ZF 360A
Details of Approval
Application
Ratio
Pleasure Duty
kW @ rpm
Light Duty
kW @ rpm
Med ium Duty
kW @ rpm
Continuous Duty
kW @ rpm
0.925:1
1.000:1
1.045:1
1.125:1
1.237:1
1.500:1
758
758
758
758
758
758
692
692
692
692
692
692
489
489
489
489
489
489
375
375
375
375
375
375
1.774:1
1.966:1
2.185:1
2.480:1
2.625:1
2.917:1
Ratio
758
2600
758
2600
758
2600
758
2600
758
2600
653
2600
Pleasure Duty
kW @ rpm
(SSC only)
758
2600
758
2600
758
2600
758
2600
758
2600
758
2600
758
2600
1.216:1
1.485:1
1.767:1
1.964:1
2.192:1
2.478:1
2.609:1
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
692
2600
692
2600
692
2600
692
2600
692
2600
611
2600
Light Duty
kW @ rpm
(SSC Only)
692
2600
692
2600
692
2600
692
2600
692
2600
692
2600
692
2600
2300
2300
2300
2300
2300
2300
489
2300
489
2300
489
2300
489
2300
489
2300
449
2300
Med ium Duty
kW @ rpm
(SSC Only)
490
2300
489
2300
490
2300
490
2300
490
2300
490
2300
490
2300
Rem arks
Cert. N o.
2100
2100
2100
2100
2100
2100
375
2100
375
2100
375
2100
375
2100
375
2100
360
2100
Continuous Duty
kW @ rpm
378
378
378
378
378
378
378
2100
2100
2100
2100
2100
2100
2100
Docum ents N o..EN G 85716
Issue N o. 5
14/ 00097
355
Type
ZF 500
(Pararllel Offset)
ZF 500-1 A
(Offset Dow n Angle)
Details of Approval
Application
Ratio
Pleasure Duty
kW @ rpm
Light Duty
kW @ rpm
Med ium Duty
kW @ rpm
0.925:1
1.000:1
1.125:1
1.237:1
1.500:1
1.774:1
1.966:1
2.185:1
2.480:1
2.625:1
2300
2.917:1
2300
Ratio
927
1017
1017
1017
1017
1017
1017
939
857
811
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
779
843
927
927
905
927
873
829
704
659
2600
2600
2600
2600
2600
2600
2600
2600
2600
2600
524
513
620
620
620
620
620
572
524
524
696
2600
556
2600
457
1.216:1
1.485:1
1.767:1
1.964:1
2.192:1
2.478:1
2.609:1
Pleasure Duty
kW @ rpm
926
2600
926
2600
926
2600
926
2600
926
2600
845
2600
800
2600
Light Duty
kW @ rpm
756
2600
756
2600
756
2600
756
2600
756
2600
756
2600
756
2600
2300
2300
2300
2300
2300
2300
2300
2300
2300
Med ium Duty
kW @ rpm
522
2100
522
2100
522
2100
522
2100
522
2100
478
2100
478
2100
Rem arks
Cert. N o.
Continuous Duty
kW @ rpm
466
2100
466
2100
522
2100
522
2100
522
2100
522
2100
522
2100
479
437
417
391
2100
2100
2100
2100
Continuous Duty
kW @ rpm
476
2100
476
2100
476
2100
476
2100
476
2100
435
2100
435
2100
Docum ents N o..EN G
11477138, issue 02
14/ 00098
356
Type
ZF 370 V
(V-Drive)
Details of Approval
Application
Rem arks
Cert. N o.
In accrod ance w ith the Special Service Craft Rules 2014
Ratio
Pleasure Duty
kW @ rpm
1.125:1 758
2600
1.263:1 758
2600
1.529:1 758
2600
1.774:1 758
2600
2.000:1 758
2600
2.222:1 758
2600
2.480:1 725
2600
In accrod ance w ith the Ship Rules 2014
Ratio
Light Duty
Med ium Duty
Continuous
kW @ rpm
kW @ rpm
kW @ rpm
1.125:1 692
2600
511
2400
432
2400
1.263:1 692
2600
511
2400
432
2400
1.529:1 692
2600
511
2400
432
2400
1.774:1 692
2600
511
2400
432
2400
2.000:1 692
2600
511
2400
432
2400
2.222:1 692
2600
511
2400
432
2400
2.480:1 692
2600
511
2400
432
2400
Docum ents N o..EN G 85719
issue N o.2 and EN G 11477606
Issue N o. 3
14/ 00099
357
Type
ZF 510-1 A
Details of Approval
Ratio
1.125:1
1.263:1
1.529:1
1.774:1
2.000:1
2.222:1
2.480:1
Pleasure Duty
kW @ rpm
926
2600
926
2600
926
2600
926
2600
926
2600
926
2600
926
2600
Light Duty
kW @ rpm
756
2600
756
2600
756
2600
756
2600
756
2600
756
2600
756
2600
Application
Med ium Duty
kW @ rpm
566
2100
566
2100
566
2100
566
2100
566
2100
522
2100
522
2100
ZF W350-1
(Parallel Offset)
Ratio
3.026:1
3.500:1
3.968:1
4.536:1
4.962:1
5.458:1
5.955:1
6.409:1
Marine Reverse
Red uction Gearbox
Med ium Duty
kW @ rpm
571
2400
571
2400
571
2400
571
2400
571
2400
571
2400
571
2400
499
2400
Rem arks
Cert. N o.
Continuous Duty
kW @ rpm
522
2100
522
2100
522
2100
522
2100
522
2100
476
2100
476
2100
Docum ents N o..EN G 97672,
issue 02
14/ 00100
Continuous
kW @ rpm
497
2400
497
2400
497
2400
497
2400
497
2400
497
2400
497
2400
427
2400
Main propulsion transm ission gearing for vessels w ith no ice
rating, in accord ance w ith the Cond itions of Approval listed in
LR Design Appraisal Docum ents N o..EN G 1591403 issue N o. 5
15/ 00047
358
Type
ZF 325-1
(Pararllel Offset)
Details of Approval
Ratio
Pleasure Duty
kW @ 2600 rpm
Light Duty
kW @2600 rpm
Application
Med ium Duty
kW @2400rpm
Rem arks
Cert. N o.
Continuous Duty
kW @ 2200rpm
1.000:1
1.050:1
1.167:1
632
632
675
608
608
608
426
426
426
1.225:1
675
608
426
1.459:1
675
608
426
1.727:1
675
608
426
2.033:1
675
608
426
2.250:1
632
608
426
2.500:1
607
548
401
2.957:1
531
489
320
2.957:1
531
489
353**
** - Pow er Rating is applicable to vessels not required to com ply
w ith the H SC cod e as per the SSC Rules only
ZF 325-1 A
Ratio
Pleasure Duty
kW @ 2600 rpm
Light Duty
kW @2600 rpm
Med ium Duty
kW@2400rpm
342
342
342
342
342
342
342
342
319
280
295**
Continuous Duty
kW @ 2200rpm
1.216:1
1.485:1
1.733:1
2.037:1
2.240:1
2.240:1
675
675
675
675
675
675
608
608
608
608
608
608
426
426
426
426
426
426
2.417:1
607
548
285
2.417:1
607
548
401**
**-Pow er Rating is applicable to vessels not required to com ply
w ith the H SC cod e as per the SSC Rules only.
342
342
342
342
230
342**
215
319
359
Type
ZF 325- IV
(V-Drive)
Details of Approval
Ratio
1.216:1
1.485:1
1.733:1
1.793:1
2.037:1
2.417:1
Pleasure Duty
kW @ 2600rpm
675
675
675
675
675
607
Light Duty
kW @2600rpm
608
608
608
608
608
548
Application
Rem arks
Cert. N o.
Med ium Duty
kW 2500rpm
444
444
444
444
444
418
360
Subject: Main Propulsion Shaft Line
Product: Flexible Shaft Couplings (Part 1A)
Centa Antriebe Kirschey
GmbH,
Bergische Straße 7,
42781 Haan,
Germany.
Type
CENTAFLEX-R,
Sizes 94 to 520
CENTAFLEX-RF
Sizes 216 to 420
Details of Approval
Roller couplings with a progressive torsional characterisation,
rubber rollers in compression between cams, aluminium inner and
outer cam parts, inner cam part shrunk on a steel hub or bolted and
with integrated “get-you-home” device.
Ratings:
CENTAFLEX-RV
Sizes 136 -520
Application
Rem arks
Cert. N o.
As couplings for
essential and nonessential purposes on
ship classed
or intended for
Classification with
Lloyd´s Register.
As couplings for
essential and nonessential auxiliary
d rives on ships
classed or intend ed
for Classification
w ith Lloyd ´s Register
10/ 20018(E1)
As couplings for essential
and non-essential purposes
for classifications w ith
Lloyd ’s Register.
When used for propulsion purposes,
these couplings are only to be
installed in m ulti engine plants or
w ith a get-you-hom e d evice in single
engine plants.
99/ 20019 (E5)
CENTAFLEX-R, Sizes 94 to 520:
Nom. torque from 0.25 kNm to 15.00 kNm
Max. speed from 5000 rpm to 2500 rpm
CENTAFLEX-RF, Sizes 216 to 420:
Max. speed from 3000 rpm to 2500 rpm
00/ 20023(E6)
Connecting details to
flywheels and to shafts to be
in compliance with the
respective Lloyd ´s Register
Rules and are not scope of this
Type Approval
CENTAFLEX-RV, Sizes 136 -520:
Max. speed from 4500 rpm to 2500
CENTAFLEX-D/ E
Flexible claw coupling w ith purely com pression stressed rubber
elem ents. Three d ifferent rubber shore hard nesses available.
Ratings:
Size
Nom. torque, Nm
Max. speed, rpm
CEN TAMAX
S/ B/ H TC
160 – 560
280 – 40000
6200 – 2000
Torsionally high elastic coupling w ith d ifferent hub d esign and
m isalignm ent capacity in axial, rad ial and angular d irections
Type
Size
Nom. torque, Nm
Max. speed, rpm
CENTAMAX S
120 - 18000
100 - 48000
5000 - 2000
361
Type
Details of Approval
Type
Size
Nom. torque, Nm
Max. speed, rpm
Application
Rem arks
Cert. N o.
CENTAMAX B
800 - 12000
700 - 15000
3600 - 2000
362
Type
Details of Approval
Type
Size
Nom. torque, Nm
Max. speed, rpm
Centa Antriebe Kirschey
GmbH ...continued
Application
Rem arks
CENTAMAX HTC
5600 - 30000
5400 - 45000
3000 - 2000
Cert. N o.
99/ 20019 (E5)
Specific ratings for d ifferent hub d esigns an d shore hard ness as
per catalogues CM-S-17-05 plus d ata sheet D004-060, rev. 7, CMB-E-06-04, CM-H TC-02-08 plus d ata sheet D004-067, rev. 3 and
d ata sheets D004-061, Rev. 8 for CEN TAMAX-Silicon, size 80018000.
CEN TAX-TT
Sizes 130 to 460
Flexible couplings w ith rubber elem ents in three d ifferent shore
A hard nesses, 50, 60 and 70.
N om . torque from 17.6 kN m to 500 kN m
Max. speed from 1500 m in -1 to 700 m in-1
(Catalogue CX-TT-03-05)
For m ain propulsion, essential
and non-essential installations
on board ships classed or
99/ 20031(E6)
For m ain propulsion only in m ultiengine d rives, in single engine
propulsion system s only, if provid ed
w ith a “get you hom e” d evice.
D ipl.-Ing. Herw arth Reich
GmbH,
Vierhausstr. 53,
44807 Bochum,
Germany.
ARCUSAFLEX
Size AC 2,3 to AC
12D
H ighly flexible couplings w ith rubber elem ents in three d ifferent
shore A hard nesses (WN =50-55°, N N =60-65°, SN =70-75°) and
w ith silicone elem ents in shore A hard ness WX=55°
on board ships and offshore
99/ 20037(E3)
GKN Stromag AG,
Hansastrasse 120,
59425 Unna,
Germany.
TRI-R
Highly flexible coupling with rubber elements of different shore
hardness with linear characteristic as per catalogue.
on board ships and offshore
For m ain propulsion in single-engine
d rives a “get-youhom e” d evice has to
be provid ed .
10/ 20049 (E1)
Size:
Nominal Torque:
Permiss. Speed:
311 R to 1243 R
1.15 kNm to 63 kNm
3800 rpm -to 1000 rpm
363
VULKAN Kupplungs-und
Getriebebau,
B.Hackforth GmbH & Co. KG,
Heerstraße 66,
D -44653 Herne,
Germany.
Type
VULASTIK-L
Application
Torsional flexible rubber couplings, compensating axial and
angular and to a certain degree, radial displacement of connected
machi-nery, 4 rubber qualities or alternatively silicone are available
for the flexible elements, 3 duty class factors.
For essential and non-essential
services on ships and offshore
intended
for Classification with Lloyd’s
Register. In single engine
propulsion systems only
couplings with a “get you
home” device to be installed.
93/ 20011(E9)
93/ 20038(E10)
Size:
X1411 to X43D8
Dimension Group:
X1410 to X43D0
Nom. Torque (kNm):
0,52 to 52
Max. Perm. Speed (1/ min): 5300 to 2500
Rem arks
Cert. N o.
Details of Approval
For essential services the duty factor Sc is applicable
RATO-S
Sizes:
G 1211 to G 731Y
and
RATO-S+
Sizes:
G 4J1S to G 5G2X
Torsional flexible couplings, com pensating rad ial, axial and
angular shaft d isplacem ent of connected m achinery, tw elve
d ifferent rubber qualities available w ith id entifiers: 1, 2, 3, 7, 8, 9,
Q, T, W, Y, Z and S, M, H , X.
N om . torque: 3,15 kN m to 900 kN m .
For essential and non -essential
intend ed for classification
VULKARDAN -E
Highly flexible coupling. 4 rubber qualities with linear stiffness
characteristic or alternatively silicone are available for the flexible
elements, 3 duty class factors.
For essential and non-essential
intended
for Classification with Lloyd’s
Register. In single engine
propulsion systems only
couplings with a “get you
home” device to be installed.
Size:
K1714 to K6012
Dimension Group:
K1710 to K6010
Nom. Torque (kNm):
0,21 to 26
Max. Perm. Speed (1/ min): 7500 to 1900
Couplings intended for single engine
main propulsion services are to be
provided with a “Get- You- HomeDevice”.
96/ 20003(E6)
For essential services the duty factor Sc is applicable
364
Type
RATO DG
RATO DG+
Details of Approval
Flexible coupling of m etal and rubber m aterial, four stiffnesses
available
RATO DG
Size:
A2111G to A39D9G
Dimension Group : A2110G to A39D0G
Nominal Torque:
8 kNm to 160 kNm
Permissible Speed: 2100 rpm to 1040 rpm
Application
As flexible elem ents for
alternato / generator-,
com pressor-, pum p – and
blow er d rives on ships and
offshore installation classed or
Rem arks
Cert. N o.
97/ 20039(E4)
365
Type
Details of Approval
Application
Rem arks
RATO DG+
Size:
2K1S to 3EDH
Dimension Group 2K10 to 3ED0
Nominal Torque:
27.5 kNm to 142 kNm
Permissible Speed 1600 rpm to 1250 rpm
VULKAN Kupplungs-und
Getriebebau ...continued
RATO-R
RATO-R+
H ighly flexible couplings w ith d ifferent qualities of rubber
elem ents on request.
RATO-R
Size:
K 4011 to G 471Y R
Dimens. group: K 4010 to G 4710 R
Nominal torque: 2.5 kNm to 270 kNm
Permiss. speed: 4140 rpm -to 750 rpm
RATO DS
RATO DS+
97/ 20039(E4)
For use in installations
requiring a high level of
torsional flexibility and
m isalignm ent capacity.
Prim arily in high-speed
m ain/ PTO system s d riven by
d iesel ingine or electric m otor
RATO-R+
Size:
2D1S to 4A2H
Dimens. group: 2D10 to 4A20
Nominal torque: 26.5 kNm to 176 kNm
Permiss. speed: 2350 rpm to 900 rpm
H ighly flexible coupling w ith d ifferent qualities of rubber
elem ents on request.
For use in installations
requiring a highe level of
torsional flexibility and
m ed ium levels of
m isalignm ent capacity on
ships and offshore
RATO DS
Size :
Dimens. Group :
Nominal Torque :
Permiss. Speed :
A211Z to A3916
A2110 to A3910
6.3 kNm to 80 kNm
2100 rpm to 1040 rpm
Cert. N o.
When used for propulsion purposes,
these couplings are only to be
installed in m ulti engine plants or
w ith a get-you-hom e d evice in single
engine plants
97/ 20040(E5)
97/ 20066(E4)
For single engine d rive system a getyou-hom e d evice to be fitted .
366
Type
Details of Approval
RATO DS+
Size :
Dimens. Group :
Nominal Torque :
Permiss. Speed :
Application
Rem arks
Cert. N o.
2K1S to 3DDH
2K10 to 3DD0
22 kNm to 110 kNm
1600 rpm to 1350 rpm
367
Product: Line Shaft Bearings (Part 1A)
Cooper Roller Bearings,
Wisbech Road,
Kings Lynn,
N orfolk, PE30 5JX,
Craft Bearing Company Inc,
5000 Chestnut Avenue,
N ew port N ew s,
Virginia 23605,
(USA).
Type
Details of Approval
Application
100/ 01/ 01E/ 02/ 02E
BCP cylind rical
bearing units
100/ 01/ 01E/ 02/ 02E
BCF cylind rical
bearing units
1DTB BCP & BCF
tapered bearing units
Z line ped estals
Ped estals w ith raised
m ounting feet
Split cylindrical roller bearings, housings and seals
S1
Split Anti-Friction Cylind rical Roller Bearings
Shaft diameter
cylindricals
tapered
Temperature range
Estimated bearing life
S1-BCH -108 H D/
S1-BCH -200 H D/
S1-BCH -208 H D/
S1-BCH -215 H D/
S1-BCH -308 H D/
Rem arks
Cert. N o.
Main & Auxiliary Machinery
05/ 00023(E2)
Main propulsion shaft
bearings
00/ 60153(E2)
As oil lubricated intermediate
shaft bearings on board of
ships classed or intended for
Register.
13/ 20013
35 to 600mm
75 to 180mm
0 to 100ºC
> 30,000 hours
FL
FL
FL
FL
FL
S1-BCH -500 H D/ FL
S1-BCH -507 H D/ FL
S1-BCH -600 H D/ FL
SKF Marine GmbH,
20457 Hamburg,
Germany.
SIMPLEX Tunnel
Bearings and
Plummer Blocks
Housing material: cast iron EN -GJL-250 (GG25),
Shell lining material: lead based or tin-based white metal
Shell body material: cast iron EN -GJL-250 (GG25) or EN -GJL-200
(GG20), steel S235JR (RSt37-2) or Ck10E+N.
Options: local thermometer, Pt100 temperature sensor, cooling
water connection, forced lubrication
368
Type
Details of Approval
Application
Ratings:
Other Conditions:
For shaft diameter 120 to 1040 mm
and maintenance of SIMPLEX
Tunnel Bearings and Plummer
Blocks the manufacturer’s
recommendations and
Rem arks
Cert. N o.
369
Wärtsilä Japan, Ltd,
14-37, 7-Chome,,
Mukaishinjo-Machi,,
Toyama,
930-0916,
Japan.
Type
B-SL/ OPSQ-F
B-FL/ OPSY-F
Details of Approval
B-SL type : oil collar self-lubricating line shaft bearings and
B-FL type : forced lubricating line shaft bearings.
Size range (m m ):
Maxim um shaft d iam eter (m m ):
Application
For use in m arine installations
Rem arks
Cert. N o.
90/ 10192(E6)
150 to 1000
150 to 1000
370
Product: Shafting (Part 1A)
Type
Auxano Technologies Ltd,
Warth Business Park,
Warth Road,
Bury, BL9 9N B,
Flexi-Bolt – F series
Gelenkw ellenw erk-Stadtilm
GmbH,
Weimarische Strabe 62,
99326 Stadtilm,
Germany.
Card an Shafts
GEWES
Sizes: 30, 43, 53, 63,
58, 68, 70, 72, 73, 77,
80, 83, 84, 85, 86, 90,
95, 97, and 98
Details of Approval
H yd raulicaly tensioned bolts:
Types:
H ole d iam eter range (m m ):
F1 to F7
55 to 125
Card an shafts in short- and w eld ed tubular d esign for pow er
transm ission of torques betw een offset d riving and d riven
m achinery and length com pensation.
Size
Max. Torque, N m
30
210
43
440
53
740
63
1100
58
68
70
72
73
77
80
83
84
1300
2100
2100
3250
3400
6467
6467
9267
13098
85
86
90
95
97
98
13098
13098
23506
25378
34095
44000
Application
Rem arks
Cert. N o.
H yd raulically tensioned bolts
for joining flanges in m arine
propulsion and auxiliary
vd rive shafts.
11/ 00025
Torque transm ission in an
ind ustrial environm ent and
for m ain propulsion and
auxiliary d rive purposes on
ships and offshore installations classed or intend ed for
Classification w ith Lloyd ’s
Register.
98/ 20043(E5)
The m axim um allow able speed for
the actual application to be calculated
accord ing to the prod ucer’s specification and recom m end ation.
371
Siemens AG,
Mechanical D rives,
BSS Couplings,
Schlavenhorst 100,
46395 Bocholt,
Germany.
Type
Details of Approval
ARPEX Couplings
All steel torsionally stiff plate pack coupling
Series ARS-6,
Com ponents
N -/ J-/ K-H ub,
E-/ H -/ O-/ U-/ ZSpacer,
F-/ D-/ C-Flange
ARS-6
Size
(mm)
ARC-8 /ARC-10
Nom.
Torque
TKN
(Nm)
Max.
Speed
(rpm)
Size
TKN
(mm)
Nom.
Torque
Max.
Speed
(Nm)
(rpm)
Application
Rem arks
As coupling for m ain
propulsion and auxiliary d rive
system s w here reliable pow er
transm issions required even
w ith slight m isalignm ent for
m arine use.
Perm issible speed and shaft
m isalignm ent accord ing to catalogues
Cert. N o.
00/ 20011(E3)
Maxim al nom inal d riving torque :
Tm ax = TKN / f1
w here:
TKN - Coupling nom inal torque from
372
Type
Details of Approval
Application
catalogue
f1- Service factor, to be taken as:
Siemens AG ...continued
Series ARC-8/10,
Com ponents
B-/ N -H ub,
H -/ U-Spacer
Series ARF-6,
Com ponents
G-/ J-H ub
Series ARH-8,
Com ponents
M-/ N -H ub,
F-/ C-Flange,
H -/ V-/ E-Spacer
Rem arks
78-6
105-6
125-6
140-6
165-6
175-6
195-6
210-6
240-6
255-6
280-6
305-6
335-6
372-6
407-6
442-6
487-6
522-6
572-6
602-6
170
270
490
700
1250
2000
3000
4400
5700
7600
10000
12000
18000
24000
34000
43000
55000
69000
92000
106000
13400
10000
8400
7500
6350
6000
5350
5000
4350
4100
3750
3400
3100
2800
2550
2350
2150
2000
1800
1700
225-8
255-8
270-8
295-8
325-8
355-8
385-8
420-8
455-8
505-8
545-8
595-8
630-8
700-8
630-10
700-10
760-10
860-10
950-10
1035-10
ARF-6
Size
8500
12700
16500
23000
33000
45000
56000
70000
88000
120000
165000
210000
260000
340000
340000
430000
550000
770000
1050000
1450000
8500
7500
7000
6500
6000
5500
5000
4500
4200
3800
3500
3200
3000
2700
3000
2700
2500
2200
2000
1850
(mm)
84-6
111-6
132-6
147-6
171-6
182-6
202-6
120
190
350
500
900
1450
2150
12500
9450
7950
7100
6100
5750
5200
Size
(mm)
214-8
230-8
245-8
275-8
310-8
345-8
410-8
Nom.
Torque
(Nm)
4000
5000
7000
10000
12500
18500
26500
00/ 20011(E3)
Electric m otors, Turbines and
H yd raulic m otors : 1.4
Piston engines 4 – 6 cylind ers,
cyclic variation 1 : 100 to 1 : 200 : 1.7
Piston engines 1 – 3 cylind ers,
cyclic variation up to 1 : 100 : 2.0
Expiry Date: 19 March 2020
.
ARH-8
Nom.
Max.
Torque Speed
TKN
(Nm)
(rpm)
Cert. N o.
Max.
Speed
TKN
(rpm)
6650
6200
5800
5200
4600
4150
3450
373
Type
218-6
252-6
267-6
Siemens AG ...continued
Spicer Gelenkw ellenbau
GmbH,
Westendhof 5 - 9,
D -45143 Essen,
Germany.
Details of Approval
688 Size 40, 45 and
65
445-8
490-8
535-8
580-8
625-8
655-8
725-8
780-8
38000
50000
65000
85000
110000
130000
165000
210000
Max. Torque (N m )
2200
3000
4911
Max. Torque (N m )
9215
13050
18067
Max. Speed (m in-1)
3500
3500
3500
Max. Speed (m in -1)
3000
3000
2500
Card an shafts in short- and w eld ed tubular-d esign w ith length
com pensation and flanges on both end s. Flange connections by
10.9 m aterial through bolts.
Size
50
55
Max. Torque (N m )
4775
6495
Max. Speed (m in -1)
2500
3500
Rem arks
3200
2900
2650
2450
2250
2150
1950
1800
Size
60
65
70
587 Size 50 and 55
4800
4150
3900
Size
40
45
65
390 Size 60, 65 and
70
3200
4500
6100
Application
Cert. N o.
00/ 20011(E3)
As pow er transm itting shafts
for m ain propu lsion and
auxiliary d rive purpose in a
m arine environm ent and for
ships and offshore services
classification w ith Lloyd ´s
Register.
00/ 20047(E2)
As pow er transm ittin g shafts
Register.
95/ 20013(E4)
As pow er transm itting shafts
Register.
95/ 20014(E4)
374
Wärtsilä Iberica, S.A.,
Pol. Industrial "As Gándaras"
Parcela 206, nave B-,
P.O. Box 212,,
36475 O Porriño,
Spain.
Type
OHSN -BX & OHSN X
Details of Approval
High Friction Shaft Coupling.
Application
Main Propulsion Shaft
Coupling for ships
Rem arks
Cert. N o.
15/ 00104
Sizes 100-700m m , torque 38.9 – 11764kN m
375
Product: Sterntube Seals and Bearings (Part 1A)
Baliño S.A.,
Bajada a la Gandara,
Corujo,
3633 Vigo (Pontevedra),
Spain.
Type
Manelip LA (Aft)
Manelip LF (Fw d )
Details of Approval
Inboard (LF) and outboard (LA) oil lubricated stern tube seals:
Shaft diameter (mm):
Max oil pressure (ba)r:
Max surface velocity (m/ s):
Max PV Factor (bar per m/ s):
Blohm + Voss Industries
GmbH,
Hermann-Blohm-Straiße 5,
20457 Hamburg,
Germany.
SIMPLAN – SiC
SIMPLAN – SiC – P
(with standstill seal)
Application
(LA)
(LF)
(Nitrile rubber)
(Viton)
126 to 795
126 to 840
1.6
2.5
(Nitrile rubber)
(Viton)
(Nitrile rubber)
(Viton)
5
6
6
8
Forward and aft propeller shaft seal equipped with silicon carbide
sealing rings and with or without inflatable stand still seal
(Pneumostop) for oil or water lubricated stern tubes. Casing
construction made of Aluminium or Bronze.
Sizes: 50 to 400 mm
for shaft diameters: 50 to 419 mm
Cedervall & Söner AB,
Kårebogatan 8,
SE-418 78 Gothenburg,
Sw eden.
SeaQual
Mechanical stern tube seal for oil lubricated propeller shafts. Aft
& forw ard seal: SeaQual (Split or fully split ed ition)
Propeller Shaft Diam eter
Lubricant
200 ~ 1000 m m
as specified by
Ced ervall
2.5 bar
Sea: 38ºC, Oil:
65ºC
Maxim um Pressure (oil)
Seal Material
Face Seal
‘O’ ring Seal
Rem arks
Cert. N o.
Inboard (LF) and outboard
(LA) oil lubricated stern tube
seals for propulsion shafts
03/ 00029(E2)
As water lubricated open
sterntubes (forward seal) as
well as for closed sterntubes
(aft and forward seal) filled
with water or oil on ships
Register for open sea or inland
waterways.
02/ 20007(E2)
SeaQual satisfies requirem ents
for 15 year survey p eriod of
the propeller shaft for ships
having tail shaft m onitoring
system SCM
04/ 00109(E2)
White m etal
Ethylene Acrylic
Rubber (Vam ac)
376
Type
Details of Approval
Application
Survey interval
Cedervall & Söner AB
...continued
in accord ance
w ith class
notation: fully
split version to be
installed for SCM
notation
10 m / sec
Max. Surface Velocity
KL (non split)
KR (split)
KLR (semi split)
MDL (non split)
MDX (split) and
MLX (sem i split)
Sterntube seals w ith “free floating” w ear rings:
To suit shaft d iam eter (m m ):
KL:
KR:
KLR:
MDL:
MDX:
MLX:
Maxim um oil tem perature (°C):
Maxim um oil pressure (bar):
Sea w ater tem perature range (°C):
D e Waal B.V.,
Biesboshaven N oord 4,
4251 N L Werkendam,
N etherlands, The.
De Waal Alpha Seal
53 to
53 to
53 to
66 to
92 to
92 to
1004
1064
1064
1059
1059
1059
Allow able tem perature
of sealing ring (°C)
m axim um of pressure
in sterntube (bar)
m axim um shaft speed (m / s)
Cert. N o.
04/ 00109(E2)
Main propulsion sterntube
seals for oil lubricated propeller
shafts.
86/ 00092(E5)
Shaft Stern Tube Seals on
board ships classed or
w ith Lloyd ’s Register w ith a
restricted service notation.
Suitable for Oil, Grease and
Water Lubricated System s.
04/ 30008(E1)
80
3
-2 to +40
Aft and Forw ard seals suitable for Oil, Grease and Water
lubricated system s
Seal size range (m m ):
Rem arks
30 to 300
80 to 120
0,4
5
377
Eagle Industry Co Ltd., KEMEL
Company,
8th Floor, Seiw a Building,
1-12-15 Shiba D aimon,
Minato-ku,
Tokyo, 105-8587,
Japan.
Type
EVK
Details of Approval
Application
Water lubricated stern tube seal - mechanical face seal
construction, incorporating an inflatable ring and carring one spare
seal on shaft
Water lubricated stern tube seal
for propeller shafts
N om inal seal size range (m m ):
Minimum shaft diameter (mm):
Maximum shaft diameter (mm):
Rem arks
Cert. N o.
08/ 10003(E2)
50 ~ 690
41
700
378
Eagle Industry Co., Ltd.
KEMEL Company,
2-13-23 Shinhama,
Arai-cho,
Takasago-scity,
Japan.
Type
AX “Pollution Free”
Details of Approval
KEMEL-AIR Seal - Construction fitted w ith four sealing rings
and net stopper in AFT seal and tw o sealing rings in FWD seal
N om inal seal size range
Minim um shaft d iam eter
Maxim um shaft d iam eter
Material of sealing ring
:
:
:
:
140 to 1,180 m m
111 m m
1,130 m m
FEPM, FKM (Viton), N BR
KEMEL-COMPACT Seal – Double security construction fitted
w ith four sealing rings in AFT seal and tw o sealing rings in FWD
seal
DX
Material of sealing ring
Fluiten Italia S.p.A,
Via L. da Vinci 14,
Pero 20016,
Italy.
Application
MU & MMS seals
:
:
:
:
stationary
Sea Water pressure
Maximum temperature
Shaft speed
catalogue
Cert. N o.
Stern tube sealing system for
use in ships fitted w ith
suitable oil lubricating
system s.
Lloyd ’s Register SCM/ *IWS
notation.
Expires : 24 January 2021
01/ 10004(E5)
system s
93/ 10007(E5)
Water lubricated stern tube
seal for propeller shafts
07/ 00029(E1)
140 to 1,180 m m
111 m m
1,130 m m
FEPM, FKM (Viton), N BR
Water lubricated stern tube seal:
Type
Shaft diameter
Seal Material
rotating
Rem arks
MU
40-125mm
MMS
100-300mm
Chrome steel
graphite,
resin loaded
Silicon
carbide
TP 316 + graphite
Cond itons.
up to 2.5 bar
80ºC
700 – 3500 rpm, refer to
379
HWASEUN G R&A Co., Ltd.,
(Gyo-D ong) 61, Chungyeol-ro,
Yangsan, Gyeongnam, 626-210,
Korea, Republic of.
Type
H S MARIN EPLEX
Details of Approval
Sid e Thruster Lip Seal Unit com posed of three rubber seal rings,
a m etal clam ping the rubber seal rings and a liner w hich rotates
together w ith the propeller shaft.
The function is to prevent oil leakage and sea w ater penetration
into the gear box.
N om inal seal size range (m m )
Minim um shaft d iam eter (m m )
Maxim um shaft d iam eter (m m )
Application
Sid e Thruster Lip Seal Unit
Rem arks
Cert. N o.
15/ 40113(E1)
: 180 to 355
: 146
: 339
380
ProfiSeal GmbH,
Mühlerstraße 13,
55288 Schornsheim,
Germany.
SKF Marine GmbH,
20457 Hamburg,
Germany.
Type
Details of Approval
Application
Rem arks
Cert. N o.
ProfiSeal Sterntube
Seals
10.00X..XXX.X0XA
For shaft d iameters
20 mm to 90 mm
10.00X..XXX.X0XA
For shaft diameters
80 mm to 280 mm
Sterntube seals for water- and oil lubricated propeller shafts with
and without Pneumostop (stand still seal)
Sterntube seals for closed
systems with oil lubrication
and for open systems with
water lubrication on Lloyd’s
Register classed ships as well
as for yachts and special
service crafts
99/ 20055 (E3)
SIMPLEX Stern Tube
Bearing Bushes
Bush material: EN -GJL-250 (GG25) cast iron, EN -GJL-200 (GG20)
cast iron or S235JR (RSt37-2) steel.
Lining material: lead based or tin-based white metal.
Options: slope, double slope, offset, local thermometer, Pt 100,
grooves for temperature sensors and pipes, oil grooves at different
angle positions
As oil lubricated stern tube
bearing bushes on board of
ships classed or intended for
Register.
13/ 20012
Ratings:
Other Conditions:
For shaft diameter 100 to 1100 mm
and maintenance of SIMPLEX
Stern Tube Bearing Bushes the
manufacturer’s
recommendations and
Aft and forward seals for oil and water lubricated sterntubes, split
and non split types with accessories.
Size 125 to 1250
As shaft sterntube glands on
board ships classed or intended
Register.
15/ 20060
SIMPLEXCOMPACT SC3
Sterntube Seals
Oil lubricated AFT
seal:
A, B,
BR, BD, C, M, Z
381
Type
Details of Approval
Application
Rem arks
Cert. N o.
Oil lubricated FWD
seal:
Z, ZL
Non Pollution Seal
“Airspace”:
S1, S1Y, S2, S1-3, S23
382
Type
Water lubricated
FWD seal:
(with Pneumostop
Housing)
Details of Approval
Application
Rem arks
Cert. N o.
15/ 20060
Non split: ZW-P,
ZZW-P ,
size 125 to
1250
Split:
EZW-P, FZW-P,
GZW-P,
size 140 to
1250
With optional
extensions:
(non split): ceramic
coated liner
(split type): E, F, G;
(others):
PPA,
Pneumostop,
Barrier Chamber,
Distance Ring,
Net Protector;
(accessories):
Active Circulation
Unit
383
Type
SIMPLEX –
COMPACT 2000
(SC2)
Details of Approval
Aft and forward seals for oil and water lubricated sterntubes, split
and non split types with accessories.
Size 125 to 1250
Application
As shaft sterntube glands on
Register.
Rem arks
Cert. N o.
94/ 20041(E4)
Oil lubricated AFT
seal:
A, B,
BR, BD, C, M, Z
384
Type
Details of Approval
Application
Rem arks
Oil lubricated FWD
seal:
Z, ZL
Cert. N o.
94/ 20041(E4)
Non Pollution Seal
“Airspace”:
S1, S1Y, S2 + S1-3 +
S2-3
Water lubricated
FWD seal:
ZW,
ZZW
Non split:
size 125 to 1250
Split:
size 140 to 1250
With optional
extensions:
(split type):
E, F, G;
(others):
PPA,
Pneumostop,
Barrier Chamber,
Active Circulation
Unit
Thordon Bearings Inc.,
3225 Mainw ay,,
Burlington,,
Ontario,, L7M 1A6,
Canada.
TG100
Shaft D iameter
3.375” – 12”
Water Pressure
1 bar maximum
Seal material
Silicon Carbid e
Inboard w ater lubricated stern
tube seal
14/ 00071
385
Type
SeaThigor Forward
Shaft Seal / Water
lubricated stern tube
seal
Details of Approval
Forward seal for water lubricated sterntubes based on mechanical
face sealing technology.
Primary dynamic seal using Silicon Carbide on Silicon Carbide
faces rated to seal at pressures up to 2 bar or 20 m vessel’s draft.
Secondary static maintenance and repair seal by engaging the
inflatable elastomer Safety Seal element activated by compressed
air.
Application
As propeller shaft seal on
Register
Rem arks
Cert. N o.
15/ 20114
Standard sizes St-01 to St-14
with shaft diameter over liner from 300 to 650 mm (11.8” to 25.6”)
386
Wärtsilä Japan, Ltd,
14-37, 7-Chome,,
Mukaishinjo-Machi,,
Toyama,
930-0916,
Japan.
Type
Details of Approval
AIRGUARD
3AS/ OLS3A/ OLS3A
-P
AIRGUARD 4ASB/ OLS4A/ OLS4A-P
Aft stern tube seal construction of seal rings and a fish net
protector w ith oil-pollution prevention air seal arrangem ent
Sternguard
MKII/ OLS2/ OLS2-P
(Forward)
Rem arks
Cert. N o.
system s.
LR SCM/ *IWS notation.
N om inal seal size range (m m ) : 155~1250 (MKII)/ 115~1250
OLS2, OLS3(OSL2-P, 3-P)
Minim um shaft d iam eter (m m ) : 136 (MKII)/ 80 OLS2, OLS3
(OSL2-P, 3-P)
Maxim um shaft d iam eter (m m ) : 1172 (MKII, OLS2, OLS3 OSL2P, 3-P)
Oil bath type sterntube sealing
arrangem ent for operation in
ships fitted w ith suitable oil
90/ 10186(E8)
Standby Seal
4BL/ OLS4/ OLS4-P
(Aft)
Minim um shaft d iam eter (m m ):
155 to 1250
136
1172
90/ 10189(E8)
Sernguard MK-IIM/ OLS2-P-C
(Forw ard ) &
Minim um shaft d iam eter (m m ):
85 to 380
56
362
LR SCM notation.
90/ 10190(E7)
Inboard w ater lubricated stern
tube seal for propulsion shafts
of yachts and sm all/ m ed ium
sized craft
01/ 00168(E6)
Sternguard
MKII/ OLS3/ OLS3-P
(Aft)
: 155 to 1,250 m m
: 136 m m
: 1,172 m m
MK-II-M/ OLS3-PC(Aft)
Wärtsilä UK Ltd,
4 Marples Way,
Havant,
Hampshire, PO9 1N X,
Application
WFS1R-P-L
WFS1R-F-L
Inboard w ater lubricated stern tube seal:
S haft Diameter
260-325 mm
330-460 mm
0B
1B
2B
Water Pressure
1.2 bar maximum
1 bar maximum
02/ 10002(E6)
387
Wärtsilä UK Ltd ...continued
Type
CoastGuard
Enviroseals, types
OFS3H -P, MC and
LC
Details of Approval
Outboard and inboard oil lubricated stern tube seal:
Type of seal
OFS3H-P
MC
(formerly AC)
Shaft d ia. (m m ):
m in.
400
314
m ax.
760
1180
Oil Pressure
Water Pressure
Seal m aterial
0.5 bar
1 bar
Silicon
carbid e
0.5 bar
1 bar
Manetex 7
N i resist
Application
LC
Sterntube sealing gland for
oil-filled sterntube or pod d ed
propulsion system .
LR SCM/ *IWS notation
Rem arks
Cert. N o.
06/ 00062(E1)
126
1180
0.5 bar
n/ a
Viton
388
Subject: Materials
Product: Building Construction Elements (Part 1A)
Access Technologies Ltd,
Unit A2, Cradley Business
Park,
Overend Road,
Cradley Heath,
West Midland, B64 7D W,
Type
Beam Clam ps:
BA, BB, BC, BD, BE,
BK, BF, BG, BH , BY
& BYP;
BoxBolts:
BQ
Details of Approval
Beam clam ps and box bolts for attaching second ary steelw ork to
structural m em bers
Bolt d iam eters (m m ):
BA, BB, BC, BD, BK, BF, BG & BK:
BE:
BY & BYP
BQ:
Application
Rem arks
Cert. N o.
For structural connections in
m arine, ind ustrial, structural
and civil engineering.
04/ 00101(E3)
For use in fastening to steel in
ind ustrial environm ents, as
per H ilti Prod uct Inform ation.
03/ 00070(E3)
8 to 24
10 to 24
12 to 20
8 to 20
Recom m end ed safe w orking load s:
Refer to m anufacturer’s technical brochure
Hilti Corporation,
FL-9494 Schaan,
Principality of,
Liechtenstein.
X-BT
H ilti X-BT d irect m echanical fastening system , com prising H ilti
fastening tool, d rill bit and pow er load s:
Thread ed stud connections:
Com posite fasteners:
DX (X-E)
X-BT M6-24-6, SN 12-R
X-BT W6-24-6, SN 12-R;
X-BT M8-15-6-R;
X-BT M10-24-6-R;
X-BT W10-24-6-R;
X-BT M8-15-6 SN 12-R;
X-BT M10-24-6 SN 12-R;
X-BT W10-24-6 SN 12-R
X-BT-ER
X-BT-MR-N M8
approval.
Includ ing structural steels
Grad es S690 and S960
X-FCM-R
H ilti DX Direct Mechanical Fastening System ; type X-E Zinc
coated thread ed stud s and nails, id entified w ith an ‘H ’ m arking
(stand ard fastening elem ent).
General purpose nails:
X-U, EDS, and DS
Thin sheet nails:
X-EN P-19 and X-EN P2K
For use in fastening carbon
steel com ponents to carbon
steel base com ponents in
ind ustrial environm ents in
accord ance w ith H ilti Prod uct
Inform ation
97/ 00077(E3)
approval
389
Subject: Materials
Type
Details of Approval
Diaphragm d ecking nails:
X-EDN and X-EDN K
Thread ed stud connections:
X-EM, X-EW and X-EF
X-H S, X-CC, X-FCM and X-FCP
Application
Rem arks
Cert. N o.
390
Subject: Materials
Hilti Corporation ...continued
Lindapter International Plc,
Lindsay House,
Brackenbeck Road,
Bradford, BD 7 2N F,
Licence L93/00003
Siemens Industrial
Turbomachinery Ltd,
PO Box 1,
Waterside South,
Lincoln, LN 5 7FD ,
Type
DX (X-CR)
Details of Approval
H ilti DX Direct Mechanical Fastening System ; Type X-CR
Stainless Steel, thread ed stud s and nails id entified w ith an ‘H i’
m arking (H igh Corrosion Resistant Elem ent):
General purpose nails:
X-CR nails
Thread ed Stud connections:
X-CRM-6, -8 and -10,
X-CRW-6, -8 and -10.
X-FCM-R and X-FCP-R
GIRDER Clam ps
Types GC, A, B, D2
and LR;
FLOOR FIXIN GS
Type FF;
GRATE-FAST
Type GF and GF2
Gird er clam ps for securing second ary
steel w ork to structural m em bers and clam ps for securing steel
floor plates and gratings:
SGT 400
Gas Turbine
Type
GC, A,
B,
D2, LR
FF
GF
GF2
Application
Rem arks
For use in fastening carbon
steel, stainless steel or
alum inium base com ponents
in m arine, offshore or
ind ustrial environm ent as per
H ilti Prod uct Inforam tion
Ind ustrial, Structural and Civil
Engineering
Cert. N o.
97/ 00078(E3)
approval
92/ 00150(E7)
See m anufacturer's catalogue for bolt
connection Load ings.
Bolt Sizes
M12, M16, M20, M24,
M30, M36
M12, M16, M20, M24
M8, M10, M12
M8, M10
M10
Pow er Generation
Mechanical Drive
15/ 00100(E1)
SGT400 13.4MW (Mechanical Drive)
Power rating (MW) 13.4MW at 9500 rpm
SGT400 12.9MWe (Generator Drive)
SGT400 15MW (Mechanical Drive)
Power rating (MW) 15MW at 9500 rpm
391
Subject: Materials
Type
Details of Approval
Application
Rem arks
Cert. N o.
SGT400 14.4MWe (Generator Drive)
392
Subject: Materials
Product: Floor Gratings (Part 1A)
Strongw ell,
1610 Highw ay 52 South,
Chatfield,
55923 MN ,
(USA).
Type
Durad ek
Duragrid
Duragrid Phenolic
Details of Approval
FRP gratings
USCG PFM 2-98 fire rating:
Durad ek:
Duragrid :
Duragrid Phenolic:
Application
FRP grating for access
w alkw ays in m arine, offshore
and ind ustrial applications.
N one
N one
Level 2
Rem arks
Cert. N o.
06/ 00111(E1)
approval
393
Subject: Materials
Product: Plyw ood and Other Wood Boards (Part 1A)
B.S. Progressive Pvt. Ltd.,
3A Pollock Street,
1st Floor,
700001 Kolkata,
India.
Type
POWERPLY:
Com prising:
Pow erply,
Pow erply Teak,
Pow erply Sapeli,
Pow erply
Mahogony,
Pow erply Fire
Rem arks
Cert. N o.
Details of Approval
Application
Marine plyw ood constructed from Gurjan tim ber, w ith or
w ithout alternative d ecorative tim ber facings, bond ed w ith WBP
m elam ine urea or phenolic ad hesive.
For the construction of craft in
m arine applications, and also
in offshore and ind ustrial
applications, w here a WBP
grad e plyw ood is specified .
07/ 00064(E1)
construction of pleasure craft
and other constructions.
05/ 00038(E2)
Tim ber is Classed as “Mod erately Durable” in accord ance w ith
BS 1088:2003
Panel sizes (m m ):
1840 x 920 to 3050 x 1525
Thicknesses (m m ):
1.5 to 50
Fighter,
Pow erply FR,
Pow erply Okum e,
Pow erply
Decorative,
Pow erply Cabin Sole,
Pow erply World
Panel,
Austin Pow erply,
Lincoln Valueply,
Pow er Accoustiply
Compensati Toro S.p.A.,
Via Piverone, 4,
10010 Azeglio (TO),
Italy.
Lightw eight
Stand ard
Marine plyw ood constructed from specified tim ber and bond ed
w ith m elanine/ ureaform ald ehyd e ad esive MUF 63T:
Durability classification (to BS 1088:2003):
Lightweight marine plywood: made throughout of
Okoume having a durability rating of Class 4, BS
EN 350-2, or better.
Standard marine plywood: made throughout of
Sapelli or Khaya having a durability rating of Class
3, BS EN 350-2, or better (i.e. moderately durable)
394
Subject: Materials
Type
Details of Approval
Panel thickness (m m ):
Lightw eight
Stand ard
Application
Rem arks
Cert. N o.
4 to 50
4 to 30
395
Subject: Materials
Type
Veneer thickness (m m ):
Lightw eight
Stand ard
Compensati Toro S.p.A.
...continued
D eutsche Holzveredelung
Schmeing GmbH & Co,
Wurdinghauser Strasse 53,
D -57399 Kirchhundem,
Germany.
Details of Approval
B740-1
Strength (N/mm 2):
Garant
Marine Ply
Super Marine Ply
Sapele Marine
Cert. N o.
05/ 00038(E2)
Parallel
to laminations
160
170
180
Perpendicular
to laminations
240
240
210
90
90
90
12,200
Compressive
@ 20°C:
@ -50°C:
@ -196°C:
Shear
@ 20°C:
@ -50°C:
@ -196°C:
@ 20°C:
@ -50°C:
@ -196°C:
Modulus:
22
18
15
140
130
110
11,000
Min. density (g/ cm 3):
Max. water absorption (%):
Black thickness (mm):
1.35
0.5
6 to 70
Marine plyw ood panels using 100% Okoum e veneer, 100%
Sapele and Okoum e w ith Sapele facing, bond ed w ith a WBP
phenolform ald ehyd e or m elam ine urea form ald ehyd e ad hesive.
Durability to BS 1088:
100% Okoum e:
100% Sapele:
Okoum e/ Sapele:
Rem arks
0.9 to 3.2
0.9 to 2.6
Com pressed lam inate w ood com posite:
Flexural
Etablissements Guy Joubert SA
(Holding),
Rue des Epinees,
Les Eliots,
16170 Auge - Saint - Medard,
France.
Application
non-d urable
m od erately d urable
non d urable
1.3 to 3.0
3 to 40
For use in support structures
for LN G and LPG tanks
08/ 00044(E1)
and general use w here a WBP
Suitable for use in accord ance
w ith the LR Rules and
Regulations for the
Classification of Special
Service Craft
03/ 00079(E3)
396
Subject: Materials
ETS Allin,
F-79270 Le Vanneau,
France.
Type
Bruynzeel:
Hechthout
Details of Approval
Marine plywood constructed from Gaboon (Aucoumea Klaineana)
timber bonded with modified urea-formaldehyde SBP
Application
Rem arks
Cert. N o.
ind ustrial use w here a WPB
04/ 00047(E4)
use where a WBP grade
plywood having a slip resistant
surface is specified.
04/ 00048(E4)
and sm all craft and other
constructions exposed to w et
w eather cond itions.
04/ 00049(E3)
Allin:
Allin Marine
+Okoume;
Durability, to BS 1088:
non-durable
Size, (mm):
2500 x 1220
2500 x 1530
2500 x 1700
3100 x 1220
3100 x 1530
Thickness, (mm):
Bruynzeel:
Woodmarine Deck;
Allin:
Woodmarine Deck
Bruynzeel:
Suprahecht;
Regina Sapelli A/ B;
Regina Sapelli B/ B;
4, 5, 6, 7, 8, 9, 10, 12, 15, 18, 20,
22, 25, 30, 40
Marine plywood constructed of Gaboon (Acoumea Klaineana)
timber bonded with modified urea-formaldehyde WBP, and
having facing veneers of Teak (Tectona Grandis) into which are
inserted strips of ureathane.
Durability, to BS 1088,
Core:
facings:
non-durable
durable
Size, (mm):
Thickness, (mm):
2500 x 1220
6, 9, 12, 15 & 18
Marine plywood constructed of Sapelli Mahogany
(Entandrophragma Cylindricum) bonded with modified ureaformaldehyde WBP.
397
Subject: Materials
Type
Allin:
Allin Marine Faces
Sapellii
Allin Marine + Tout
Sapelli
Details of Approval
Durability, to BS 1088:
Size (mm):
Thickness (mm):
Application
Rem arks
Cert. N o.
moderately durable
2500 x 1220
2500 x 1530
2500 x 1700
4, 5, 6, 7, 8, 9, 10, 12, 15, 18,
20, 22 & 25
398
Subject: Materials
Ets Burguet,
Les Rives,
16390 Montignac-le-Coq,
France.
Type
BURMARIN E
DELUX
Application
Marine plyw ood panels using a WBP m elam ine urea
form ald ehyd e ad hesive, tim ber classification to EN 350-2, Class 3
or better:
and general exterior use
w here a WBP grad e plyw ood
is specified . Suitable for use
on sm all craft in accord ance
w ith the LR Rules and
Regulations for the
Service Craft.
02/ 00017(E2)
and general exterior use
w here a WBP grad e plyw ood
is specified . Use on sm all craft
in accord ance w ith th e LR
Rules and Regulations for the
Service Craft is subject to
special consid eration.
02/ 00018(E2)
Durability to (EN 350-2):
Burm arine Delux Agba:
Burm arine Delux Khaya:
Burm arine Delux Makore:
Class 2
Class 3
Class 1
Burm arine Delux Moabi:
Burm arine Delux Movingui:
Burm arine Delux Sapelli:
Burm arine Delux Sipo-utile:
Class 1
Class 3
Class 3
Class 2
Panel size (m m ):
0.6 to 3.0
2 to 60
2150 to 3100 x 950 to 1830
Rem arks
Cert. N o.
Details of Approval
Other panel sizes by arrangem ent
BURMARIN E
Marine plyw ood panels using a WBP m elam ine urea -phenol
form ald ehyd e ad hesive, tim ber classification to BS 1088, nond urable.
Burm arine Okoum e:
Burm arine Decor:
Burthin Okoum e*:
Durability to (EN 350-2)
Class 4
Class 4
Class 4
399
Subject: Materials
Type
Details of Approval
Burthin:
Panel size (m m ):
Application
Rem arks
Cert. N o.
0.6 to 3.0
2 to 60
1.5 to 6.0 (in 0.1 m m increm ents)
2150 to 3100 x 950 to 1830
*N ote: Burtnin Okoum e is bond ed w ith phenolic glue.
400
Subject: Materials
Ets Burguet ...continued
Type
BURMARIN E
DECKIN G
Details of Approval
Marine plyw ood for d ecking constructed using Class 3 tim ber,
or better, grooved face, w ith inserted black or w hite urethane
strips. Ad hesive – WBP m elam ine urea form ald ehyd e.
Application
Rem arks
Cert. N o.
Marine d ecking
02/ 00019(E2)
construction of pleasure craft,
sm all craft and other
costructions.
05/ 00052(E3)
BURMARIN E
DECKIN G DELUX
Burm arine Decking (Okoum e core):
Burm arine Decking Delux
(Class 3 or better core):
Panel size (m m ):
F.A. Mourikis S.A.,
4, Parnassou Street,
AG.I. Rentis,
Piraeus, 182 33,
Greece.
MOURMAR®
Durability to (EN 350-2)
Class 4
Class 3
0.6 to 3.0
3 to 40
2150 to 3100 x 950 to
1830
Marine plyw ood constructed from Okoum e and / or Sapelli w ith
or w ithout d ecorative outer veneers, bond ed w ith m elam ine urea
form ald ehyd e (MUF) ad hesive:
Durability (to BS 1088:2003)
N on-d urable (Okoum e)
3 to 45
1.1 to 3.0
Durability (to BS 1088:2003)
(Sapelli)
Mod erately-d urable
3 to 25
1 and 1.5
401
Subject: Materials
Garnica Plyw ood Baños de Rio
Tobia S.A.U.,
Camino de Berceo S/N ,
26320 Baños de Rio Tobia,
La Rioja, 26320,
Spain.
Type
Marine Prem ium
Okouply;
Marine Okouply
Details of Approval
Marine plyw ood constructed of okoum e tim ber throughout,
bond ed w ith m elam ine urea form ald ehyd e or phenolic resin
ad hesive:
Panel size (m m ):
Durability:
3 to 40
1.3 to 3.1
3150 x 1850
Class 3
Application
Marine. Offshore and
and sm all craft and other
w eather cond itions
Rem arks
Cert. N o.
10/ 00011(E1)
402
Subject: Materials
Type
Javor Pivka d.d.,
Kolodvorska cesta 9a,
Pivka, SI-6257,
Slovenia, Republic of.
TP 100T
Malvaux Industries,
21 Rue de la Gare,
17330 Loulay,
France.
Malvo-CP Marine
Okoum e BS1088;
Malvo-CP
(d ecorative veneered
Gaboon);
Malvo-CP Marine
Sapelli BS1088
Malvo-CP Marine
Faces Sapelli BS 1088
Details of Approval
Water resistant plyw ood board s for lining the insulation of
refrigerated cham bers:
Application
ind ustrial applications.
Durability w ith respect to BS1088:
Okoum e:
N on d urable
Sapelli:
Mod erately d urable
Thickness (m m ):
Okoum e:
Sapelli:
Okoum e/ Sapelli:
Panel sizes (m m ):
Cert. N o.
91/ 00184(E5)
See cond itions on Certificate for
d etails on fungicid e.
Beechw ood or Birchw ood plyw ood
Density (kg/ m 3):
680 at 12% hum id ity
Thickness (m m ):
9 to 35
Length (m m ):
1500, 2500
Wid th (m m ):
150, 1500
Marine plyw ood constructed from Okoum e Gaboon or Sapelli
tim ber and bond ed w ith phenolic glue WBP or m oisture resistant
m od ified m elam ine form ald ehyd e based glue:
Rem arks
m arine applications and also
in offshore to ind ustrial
applications w here a WBP
98/ 00148(E5)
4, 5, 6, 8, 9, 10, 12, 15, 18, 22, 25 & 30
4, 5, 6, 8, 10, 12, 15, 18, 22, 25 & 30
4,5,6,8,9,10,12,15,18,22,25,30,35, & 40
2500 x 1220/ 1530
3100 x 1530
403
Subject: Materials
Plysorol Europe,
Etablissement de Lisieux,
BP 12090,
108 Rue D 'Orbec,
14102 Lisieux,
France.
Type
Isogarant
Details of Approval
Marine plywood constructed of okoume timber bonded with
aminoplast resins (melamine urea formaldehyde adhesive):
Non-durable
Panel size (mm):
Panel thickness (mm):
2500 x 1220
6, 9, 10, 12, 15, 18, 22, 25, 30 & 40
Panel size (mm):
Panel thickness (mm):
3100 x 1530
10, 12, 15, 18, 22, 25, 30 & 40
Application
use for the construction of
pleasure craft and small craft
and other constructions
exposed to wet weather
conditions.
Rem arks
Cert. N o.
10/ 00001
404
Subject: Materials
ROUGIER AFRIQUE
IN TERN ATION AL,
75 avenue des Champs Elysées,
75008 PARIS,
France.
Röchling Engineering Plastics
KG,
Röchlingstraße 1,
49733 Haren,
Germany.
Type
Okoucent Marine;
Okoucent Exterior
LIGN OSTON E
H II/ 2/ 30
Details of Approval
Plyw ood panels m ad e up of Okoum e throughout bond ed w ith
m elam ine urea form ald ehyd e ad hesive:
Panel sizes (m m ):
Thickness (m m ):
Okoucent Marine:
Okoucent Extereior:
2500 x 1220 & 3100 x 1530
Durability (to BS 1088):
N on d urable
Specified Standards and Test Values:
Compressive
Strength
Shear Strength
Density
Red Meranti
Cert. N o.
m arine applications, and also
in offshore and ind ustrial
applications.
12/ 00078
Support material for use
between liquefied gas tanks
and the hull support structure
in Type `A` and `C` Gas Ships
02/ 20031(E2)
use for the construction of
pleasure craft, small craft and
other constructions.
00/ 00089(E2)
Minimum value N/ mm 2
Perpendicular
Parallel to
to lamination
lamination
240 (min)
70 (min)
160 (min)
40 (min)
> 1.35 g/ cm
Plywood of marine type, constructed of Red Meranti (Shorea)
bonded with phenol formaldehyde (WBP)
Thickness (mm):
Rem arks
10, 12, 15, 18, 22, 25, 30 & 35
5, 8, 10, 12, 15, 18, 22, 25, 30,
35 & 40
Laminated Compressed Wood
TEST
Samling Plyw ood (Baramas)
Sdn Bhd,
Lot 533, Block 1,,
Kuala Baram Industrial Estate,
CD T N o. 47,
98009 Miri,
Saraw ak,
Malaysia.
Application
Moderately Durable
4 to 25
405
Subject: Materials
Tableros Folgado S.A.,
C/Mayor, 102,
46960 Aldaia,
Valencia,
Spain.
Type
Okoum e
Details of Approval
Marine plyw ood constructed of okoum e tim ber bond ed w ith
m elam ine form ald ehyd e ad hesive:
Panel size (m m ):
Durability:
Yong Woo Inc,
30, Green gongdan 3-gil,,
Yangsan-si,,
Gyeongsangnam-do,
Korea, Republic of.
Com pressed
lam inated w ood
3, 4, 5, 6, 9, 10, 12, 15, 16, 18, 20,
22, 25, 30 & 32
1.0 to 3.2
2500 x 1220
2440 x 1220
N on d urable
Follow ing approval tests und ertaken:
Com pression test (ISO 604)
Absorption test (ISO 62)
Therm al cond uctivity (ASTM C518)
Coefficient of linear th erm al expansion (ASTM E228-11)
Shear test (GTT-M3010)
Application
Rem arks
Cert. N o.
and sm all craft, and other
w eather cond itions.
11/ 00043(E1)
LN G/ LPG tank support
15/ 00052
406
Subject: Materials
Product: Thermal Insulation (Part 1A)
Bay Systems BV,
Korte Groningerw eg 1A,
9607 PS Foxhol,
N etherlands, The.
Type
Baym er
Baym er
Baym er
Baym er
Baym er
AL737 (B2),
AL748 (B3)
AL751 (B2),
AL757 (B3)
AL777 (B2)
Details of Approval
Application
Read y m ad e system s for the prod uction of tw o com ponent rigid
polyurethane foam (Free foam ) for in situ therm al insulation and
jointing of rigid panel stock.:
To form insulated envelopes
surround ing LPG and LEG
cargo tanks using form ers and
platens, and in situ foam ed
insulation as filler. Therm al
insulation of insulated
enclosures used for cold and
chill storage for land -based
and m arine use
For use in insulated pipe
system s for LN G, LPG, LEG
and other refrigerated cargo
Density (Kg/ m ³):
Flam m ability characteristics:
Therm al cond uctivity, aged
(W/ (m .K)):
Com pressive strength –
perp’ (kPa):
Com pressive E m od ulus
(N / m m 2):
Percentage open cells (%):
Water absorption (%):
Dim ensional stability
@ 100°C (%):
Dim ensional stability
@ m inus 25°C (%):
Hankuk Carbon Co.LTD ,
Head Office 85 Chunhw a-ro,
Bubok-Myeon,
Miryang- si, Gyeongnam,
Korea, Republic of.
PF-50C
(Polyisocyanurate
Foam )
AL737, AL751
AL777
AL748,
AL757
39.3 - 47.0
B2
37.5- 47.0
B3
0.024 - 0.026
0.029 - 0.03
164 - 323
136-232
4.3 - 11.2
96 – 98
< 2.5
3.7 - 5.6
97.0
< 2.5
< 3.5
< 3.3
< 0.2
< 0.1
Pre-formed insulation material for piping system – resistance to fire
and flame spread
Rem arks
Cert. N o.
06/ 00013(E1)
Other Cond itiions see Certificate
15/ 40005
407
Subject: Materials
KAEFER Broadw ay Insulation
Systems (Shanghai) Co., Ltd.,
N o. 8 Guxu Road,,
Pudong N ew D istrict,,
201209 Shanghai,,
Type
EPS 27 kg/ m 3
form ed insulating
panel.
Details of Approval
Application
Expand ed Polystyrene therm al insulating panels (LOYAL F type
EPS Raw Material)
To form insulated envelopes
using pre-form ed panels
surround ing LN G/ LPG/ LEG
cargo tanks for m arine
application
Flam m ability characteristics
B2
Density at 20˚C (Kg/ m 3)
26.86
Therm al Cond uctivity, 20˚C (W/ m K) 0.0344 (ASTM C177)
Therm al Cond uctivity, -165 ˚C (W/ m K) 0.0143 (ASTM C518)
Therm al and H um id Aging (%)
0.11
Rem arks
Cert. N o.
15/ 00042
408
Subject: Materials
Type
Application
Rem arks
Cert. N o.
15/ 00042
KAEFER Broadw ay Insulation
Systems (Shanghai) Co., Ltd.
...continued
Logstor,
D anmarksvej 11,
D K-9670 Logstor,
D enmark.
Details of Approval
A&B
Testing at 20˚C
Com pressive Strength (MPa)
Tensile Strength (MPa)
Flexural Strength (MPa)
Shear Strength (MPa)
Dim ensional Stability (cm 3)
As form ed
0.16
0.38
0.37
0.213
132.3
Testing at m inus 165˚C
Com pressive Strength (MPa)
Tensile Strength (MPa)
Flexural Strength (MPa)
Shear Strength (MPa)
As form ed
0.178
0.358
0.375
0.236
After im m ersion
in LN G (15 d ays)
0.168
0.347
0.362
0.212
134.0
After im m ersion
in LN G(15d ays)
0.186
0.350
0.321
0.242
Insulation for pre-insulated pipes and fittings
The insulation com prising of a tw o com ponent rigid
polyurethane foam betw een the carrier pipe (or fitting) and an
outer clad d ing of high d ensity polyethylene.
Carrier pipe
d iam eter (m m )
Copper
34.93 to 79.37
Steel
21.3 to 406.0
Stainless steel
21.3 to 914.0
Desnsity (Kg/ m 3): Type A (LN G):
Type A and B:
For use in insulated pipe
system s
Carrier pipe is to be suitable for
intend ed application and m ed ium .
Refer to Certificate for m arine use.
00/ 00096(E3)
Insulation
thickness (m m )
18.5 to 36.7
25.2 to 183.0
25.3 to 198.4
>65
>60
Water vapour perm eability (g/ m / 24hrs):
Therm al cond uctivity @ 50°C (W/ m k):
Closed cell content (%):
<0.04
<0.030
>88
409
Subject: Materials
MOREEN S CORPORATION ,
254 D ON AM-D ON G,
YEOUN GCHEON -SI,
GYEON GBUK, 770-130,
Korea, N orth.
Type
ESLIN
ESLIN
ESLIN
ESLIN
– Pipe cover,
Board,
Elbow &
Felt
Details of Approval
E-Glass fiber base non-combustible thermal insulating materials.
Desnsity (kg/ m 3) : 200 ±10% (ESLIN Pipe cover, ESLIN Elbow &
ESLIN Board)
165 ±10% (ESLIN Felt)
Thermal conductivity (W/ m.k): 0.032 at 70 ºC
Service tem perature range (ºC) : 0 to 750
Application
Thermal insulation of hot and
sweating pipes and equipment
in machinery spaces for
marine use
Rem arks
Cert. N o.
12/ 10055
410
Subject: Materials
Pentair Thermal Management
Belgium BV,
Romeinse straat 14,
3001 Leuven,
Belgium.
Type
Details of Approval
BTV H eating system ,
QTVR H eating
system ,
XTV H eating system ,
KTV heating system .
Each consists also of:
Raystat-EX-03 an
Raystat-EX-04
Electronic
Application
IEC EN 60079-0, IEC/ EN
60079-30-1, IEC/ EN 6007931, IEC / EN 62395
Thermal insulation of hot and
sweating pipes and equipment
in machinery spaces for
marine use
therm ostat,
MON I-PT100-EXE,
MON I-PT100-EXEAMB Am bient
Tem perature Sensor,
CCON 20-PI-C,
CCON 20-CMT, ATE180, Raystat-EX-02
therm ostat, GL-36M25 Gland , non ex
JB-82 box, non ex TM-10-S therm ostat
Se Woon T&S Co Ltd,
11-9, Mangjung-D ong,
Youngcheon-Si,
Kyeongbuk,
Korea, Republic of.
HITLIN Pipe Cover
and HITLIN Felt
E-Glass fiber base non-combustible thermal insulating materials.
Desnsity (kg/ m 3) :
200 ±10% (HITLIN Pipe Cover)
165 ±10% (HITLIN Felt)
Thermal conductivity (W/ m.k): 0.030 at 20 ºC
0.032 at 70 ºC
Service tem perature range (ºC) :
0 to 750
Rem arks
Cert. N o.
15/ 30006
-Equipment of non EX type is to be
positioned outsid e the hazard ous
area.
-The temperature controllers of the
heating cable should be set and locked
no higher then 10 degrees Celcius
below the auto ignition temperature of
the gas exposed to the cable. Setting to
be marked inside and outside on the
control box suitable for the weather
conditions exposed to.
-Equipm ent of IP-rating lesser then 56
is not to be positioned on outsid e
d ecks, as m inim um is IP 56 for
outsid e areas.
05/ 10011(E1)
411
Subject: Materials
SHAN GHAI BROAD WAY
PACKAGIN G &
IN SULATION MATERIALS
CO., LTD .,
N o. 8 Guxu Road,
Shanghai 201209,
Type
WOOJO-WR 4002
Details of Approval
Application
Tw o com ponent polyurethane therm al insulating foam used for
panel prod uction or in situ (‘pour-in- place’) applications.
Density (kg/ m ³)
Therm al cond uctivity, 26.01°C (W/ (m .K))
Therm al cond uctivity, m inus 163°C (W/ (m .K))
Percentage closed cells (%)
43.4
0.0224
0.0121
95.58
Com pressive strength as foam ed (kPa)
Shear strength as foam ed (kPa)
308
287
For use on the outsid e of
LN G, LEG and LPG gas
carrier cargo tanks using preform ed panels, panels cut
from slab stock and in situ
foam ed insulation as filler.
Therm al insulation of
insulated enclosures used for
cold and chill storage for land based and m arine use
Rem arks
Cert. N o.
13/ 00075(E1)
The use of this prod uct in Lloyd ’s
Register classed LN G/ LEG/ LPG
carrier or land -based facility also
requires it to be: installed und er the
supervision and to the satisfaction of
Lloyd ’s Register Surveyors and in
accord ance w ith the relevant Rules
and Cod es.
412
Subject: Materials
Type
Tensile strength as foam ed (kPa)
Bend ing strength as foam ed (kPa)
SHAN GHAI BROAD WAY
PACKAGIN G &
IN SULATION MATERIALS
CO., LTD . ...continued
BASF-CH 1422/ 1 CA
Wärtsilä N etherlands B.V.,
Chr. Huygensw eg 23,
5151 D M D RUN EN ,
N etherlands, The.
Details of Approval
WTT-11
Application
368
364
Tw o com ponent polyurethane therm al insulating foam used for
panel prod uction or in situ (‘pour-in- place’) applications.
Density (kg/ m ³)
Therm al cond uctivity, 24.03°C (W/ (m .K))
Therm al cond uctivity, m inus 163°C (W/ (m .K))
Percentage closed cells (%)
43.8
0.0214
0.01059
95.36
Com pressive strength as foam ed (kPa) 348
Shear strength as foam ed (kPa)
Tensile strength as foam ed (kPa)
Bend ing strength as foam ed (kPa)
309
410
462
Tunnel Thruster w ith 3 d ifferent gear ratios:
13 : 34 / input 950rpm / 1100kW
13 : 41 / input 1200rpm / 1100kW
12 : 47 / input 1500rpm / 1100kW
Rem arks
Cert. N o.
13/ 00075(E1)
For use on the outsid e of
LN G, LEG and LPG gas
carrier cargo tanks using preform ed panels, panels cut
from slab stock and in situ
foam ed insulation as filler.
Therm al insulation of
insulated enclosures used for
cold and chill storage for land based and m arine use
Auxilairy (m anoeuvring) &
Dynam ic Positioning.
approval.
14/ 00002(E1)
The use of this prod uct in Lloyd ’s
Register classed LN G/ LEG/ LPG
carrier or land -based facility also
requires it to be: installed und er the
supervision and to the satisfaction of
Lloyd ’s Register Surveyors and in
accord ance w ith the relevant Rules
and Cod es.
16/ 30003
The tunnel has been approved for a m axim um local hull
thickness of 18m m and cathod ic protection is to be provid ed as
specified in the Instalation and Planning (IPI) d ocum ent from the
m anufacturer.
Lubrication oil head er tank is to be fitted above the load w ater
line w ith a low level alarm fitted in the m achinery space.
For classed applications the acceptance of the shaft sizes are
cond itional upon torsional vibration analysis to be carried out in
accord ance w ith the Rules.
413
Subject: Measuring Systems
Product: Level Gauges (Part 1A)
Hankuk Miboo Co. Ltd.,
#388-1, Gupyeong-dong,
Saha-gu,
Busan, 604-060,
Korea, Republic of.
Type
GLG series:
GLG-TB1-A, R, V
GLG-TB2-A, R, V
GLG-RL-V, R, A
GLG-RH -V, VW
Details of Approval
Glass level guages, GLG series.
Application
GLG-TB1 & GLG-TB2 tubular types:
Maxim um w orking pressure
Maxim um w orking tem perature
: 0.29 MPa
: 100 C
Marine and offshore use:GLG-TB1 tubular type to be
used for w ater tanks.
GLG-TB2 tubular type to be
used for w ater tanks.
GLG-RL flat type:
: 0.29 MPa
: 150 C
GLG-RL flat type to be used
for w ater tanks and , in cargo
ships only, oil tanks.
GLG-RH reflex type:
: 1.57 MPa
: 200 C
GLG-RH reflex type to
d irectly read the w ater level of
boilers and pressure vessels.
Rem arks
Cert. N o.
01/ 10088(E3)
Device to ind icate the level of
liquid in w ater tanks and oil
tanks in m arine and offshore
applications.
01/ 10089(E3)
MFLG series:
MFLG-A
MFLG-B
MFLG-C
Marine float level gauge, MFLG series.
MLG series:
MLG-S
MLG-T
Magnetic type float level gauge, MLG series
: 0.49. MPa
: 150 C
tanks by use of m agnet rotors
in m arine and offshore
applications.
01/ 10090(E3)
DFLG series:
DFLG-T
DFLG-S
Dial type float level gauge, DFLG series
Closed sound ing d evice to
ind icate the level of liquid in
w ater tanks and oil tanks in
applications.
01/ 10091(E3)
: 120 C
: 150 C
414
Hankuk Miboo Co. Ltd.,
#143, Hasinbeonyeong-ro,
Saha-gu,
Busan,
Korea, Republic of.
Type
Details of Approval
SPCG series:
SPCG-VP
Diaphragm type level gauge, SPCG series.
: 120 C
Application
tanks (cargo ships only) by
use of d iaphragm and
capillary tube in m arine and
offshore applications.
Rem arks
Cert. N o.
15/ 40075(E3)
415
Type
Intra-Automation GmbH,
Otto-Hahn-Straße 20,
41515 Grevenbroich,
Germany.
ITA-3-LR PN 16
ITA-6-LR PN 40
Jiangsu Yuanw ang Instrument
Co. Ltd,
West Industrial Area,
Qintong Tow n,
Jiangyan City,
225508 Jiangsu Province,
ULB - 3G – R
ULB - 3G – T
KAN EKO SAN GYO CO. LTD .,
5-10-6, Shiba,
Minato-ku,
Tokyo, 108-0014,
Japan.
Naview L31 Series
Details of Approval
Application
Magnetic level gauge
Boiler level gauge:
ULB - 3G – R (Reflex type):
Max. w orking pressure (MPa):
Max. w orking tem perature (°C):
2.5
220
ULB - 3G – T (Transparent type):
Max. w orking pressure (MPa):
Max. w orking tem perature (°C):
4.0
260
Flat glass level gauge, with four types of connection at the top end:Auto Safety Vent Valve type:
Open air vent
Pipe Union type:
Open air vent
Push Button Valve type:
Closed return to tank with a
pushbutton operated self-closing valve
Valveless Closed type:
valve
Maximum Working Pressure:
Maximum Working Temperature:
Rem arks
Cert. N o.
As liquid level indicators on
tanks above the double bottom
Lloyd’s Register.
98/ 20040(E3)
Boiler level gauge for m arine,
offshore and ind ustrial boilers.
07/ 00026(E2)
Device to directly indicate the
level of liquid in water tank
and oil tank and oil tanks
(cargo ships only) in marine
and offshore applications.
13/ 10074
Shut off valves at the connection
between tank and level indicator to be
provided.
The level indicators are not to be used
on passenger ships for tanks containing
flammable liquids
Place of Production:
MORI FACTORY CO., LTD.
754 Katoku, Togane-shi, Chiba-ken
282-0062, Japan
Closed return to tank without
2.67 bar
80ºC
416
Klinger Italy Srl,
Viale D e Gasperi 88,
20017 Rho (Milano),
Italy.
Type
Details of Approval
MT 100 (Transparent
Type)
MR 25 (Reflex Type)
Glass Level Gauges for boilers ad d itionally available w ith safety
ball d evice.
Application
Rem arks
Cert. N o.
For level ind ication on steam
boilers and other pressure
vessels.
15/ 20036
Device to d irectly read the
w ater level of boilers and
pressure vessels in m arine and
offshore applications.
01/ 10049(E3)
Device to d irectly ind icate the
level of liquid in w ater tanks
in m arine and offshore
applications.
01/ 10050(E2)
Ratings:
MR25: d esign pressure 25 bar
MT100: d esign pressure 40 bar
Other Conditions
The Auto Ball safety d evice should only be used for applications
w here in the event of glass breakage a leakage rate of 3,5 l/ m in
is acceptable.
All boiler m ountings are to be subjected to a hyd raulic test of
tw ice the approved d esign pressure to the satisfaction of the
attend ing surveyor.
Kuk D ong Level Co,
843-1, Janglim-dong,
Saha-Ku,
Busan, 604-842,
Korea, Republic of.
KD-RLG-01
KD-RLG-02
Reflex type w ater gauge w ith valves,
Maxim um w orking pressure:
1.96 MPa
Maxim um w orking tem perature: 200 C (KD-RLG-01)
250 C (KD-RLG-02)
KD-TLG-01
KD-TLG-02
Tubular type level gauge,
w ith three types of connection at the top end :A-Type: Open air vent
B-Type: Closed return to tank w ithout valve
C-Type: Closed return to tank w ith valve
C
417
Type
Details of Approval
Application
Rem arks
Cert. N o.
0.29 MPa
Maxim um w orking tem perature: 100 
418
Kuk D ong Level Co
...continued
Type
KD-FLG
Details of Approval
Application
Flat type level gauge,
w ith three types of connection at the top end :A-Type: Open air vent
B-Type: Closed return to tank w ithout valve
C-Type: Closed return to tank w ith valve
Rem arks
Cert. N o.
Device to d irectly ind icate the
level of liquid in w ater tanks
and oil tanks (cargo ships
only) in m arine and offshore
applications
01/ 10051(E2)
tanks (cargo ships only) in
applications.
01/ 10052(E2)
ind ustrial general purpose
use.
93/ 00151(E7)
Ind ication of tank liquid levels
in m arine, offshore and
ind ustrial applications
0.49 MPa
Maxim um w orking tem perature: 120 C
KD-MLG
Magnetic float type level gauge,
0.49 MPa
Maxim um w orking tem perature: 150 C
Seetru Ltd.,
Albion D ockside Works,
Hanover Place,
Bristol, BS1 6UT,
Licence L93/00029
G. 211940
G. 211941
G. 211942
G. 211943
G. 211944
G. 170110
G. 170200
Seem ag G35
Seeflex flat glass level gauges w ith self closing pushbutton valve
and hyd raulic actuator, w ith lever or pushbutton operation.
Elastom eric or com posite hyd rostatic seals:
Maxim um length (m ):
N ylon pipew ork m elting tem perature
approx. (°C):
Magnetic liquid level ind icator
ratings:
18 bar @ 180ºC
2.67
-35 to 80
9
N ot to be fitted in Passenger Ships.
See brochure 1111 d ated May 1992.
H yd raulic actuation d evices
incorporate connecting nylon
pipew ork (refer to Design Appraisal
Docum ent 31456 Issue 1)
160
99/ 00147(E4)
419
Taixing Thermal Meters
Factory,
N o. 24, West Street, Guangling
Tow n,,
Taixing City, 225462,
Jiangsu Province,
Type
Magnetic level gauge:
UHZ-511Z-C, UHZ512Z-C
Flat glass level gauge:
ULB-3A-C, ULB-3B-C
Self-dial liquid level
gauge:
HB-SPCG-150S,
HB-SPCG-150V
Details of Approval
See ratings in certificate
Application
As liquid level indicators on
tanks above the double bottom
tanks on ships classed or
Lloyd’s Register.
Rem arks
Expires: 23 December 2020
Cert. N o.
15/ 80057
Others conditions see certificate.
420
VIMEX A/S,
Moloveien 3,
3187 Horten,
N orw ay.
Type
N OR 4082-S
Details of Approval
Application
Magnetic float operated high level alarm sw itch. Single version,
operating at 1 (one) fixed alarm level.
For liquefied cargoes
transported in bulk crud e and
prod uct oils, chem icals and
LN G/ LPG.
Rem arks
Cert. N o.
13/ 70003(E4)
Available w ith float Type 0, Type 1
and Type FT (see Technical brochure)
N OR 4082-D
Magnetic float operated high level alarm sw itch. Dual version,
ind epend ently operating at 2 (tw o) fixed alarm levels.
“
For hazard ous area
installations/ operation, certified
intrinsically safe equipm ent is
required in connection to the alarm
circuit.
“
N OR 4082-T
Magnetic float operated high level alarm sw itch. Dual version,
ind epend ently operating at 2 (tw o) fixed alarm levels.
“
“
N OR 2593
Magnetic float operated high level alarm sw itch. Single version,
operating at 1 (one) fixed alarm level.
For w ater ingress d etection
system s on bulk carriers for
com pliance w ith SOLAS,
Chapter XII, Regulation 12 to
m axim um hold d epth of 25
m etres.
“
421
Product: Level Indicators (Part 1A)
FIN ETEK CO., LTD .,
N o. 16, Tzuchiang St., Tucheng
Industrial Park,
Tapei Hsien,,
Taiw an, 23678,
Type
Details of Approval
Bypass Level
Indicator
Bypass Level Indicator & Mini bypass Level indicator
Contact Capacity : 1A/ 30W/ 200Vd c/ 240Vac
Type: (Metal
H ousing Only)
EFA1H Series
EFA5M Series
Pow er Supply: 13 – 36Vd c
Output Current: Loop pow er 4-20m A
Application
EN V5 (2002) in
“General Power Distribution
Zones”
Rem arks
DESIGN CODE
STAN DARD :
See manufacturer’s specification
Ad d itional Test:
Enclosure Test : 30 minutes for
IP67
Cert. N o.
15/ 80025(E1)
Extension from
LR type
approval
certificate No.
10/ 10027
EFB1H / K/ L Series
EFB2/ 3K Series
EFB7H Series
EFC1/ 8H Series
Mini bypass Level
Indicator
OTHER CONDITIONS :
Screw fitting type is not used to any
flammable oil tanks, and to pipe
exceeding 51mm outer diameter when
it is intended to use for marine and
offshore application.
Type: (Metal
H ousing Only)
MEF Series
Sid e Mounting Float
Sw itch
Type: (Metal
H ousing Only)
FF10/ 20/ 40/ 45/ 50/
55/ 70/ 71/ 73/ 75
/ 90/ 92 Series
FFB-0300 (Test
Accessory)
Sid e Mounting Float Sw itch
FF10/ FF40DFM/ FF50DFM/ FF90GLO Series
Contact Capacity : 5A/ 250Vac
FF20 Series
Contact Capacity :1A,30W/ 200Vd c/ 220Vac
FF20BH M/ FF45DFM/ FF55DFM Series
Contact Capacity : 1A,30W/ 200Vd c/ 220Vac
FF70/ 71/ 73/ 75 Series
Contact Capacity : 3A/ 250Vac
422
FIN ETEK CO., LTD .
...continued
Type
Magnetic Float Level
Ind icator
Type: (Metal
H ousing Only)
FG*B Series (*:A to
D)
FG*E Series (*:A to
D)
FG*K Series (*:A to
D)
FG*L Series (*:A to
D)
FG*N Series (*:A to
D)
FG7*D Series (*:A to
D)
FG7*N Series (*:A to
D)
Magnetic Float Level
Sw itch
Type: (Metal
H ousing Only)
FDB/ E/ H / K Series
FD7D/ N Series
FH Series
FM Series
F7H Series
F7M Series
FDB-400 (Test
Accessory)
Details of Approval
Magnetic Float Level Ind icator
Application
Rem arks
Cert. N o.
15/ 80025(E1)
Pow er Supply: 12 -36Vd c
Output Current: Loop pow er 4-20m A
Pow er Supply: 2.5 -10Vd c
Output: 2-w ires, 3-w ires 50kOhm / m
Magnetic Float Level Sw itch
Tube Type OD9.5m m , OD12.7m m ,
OD17.2m m
Contact Capacity: 50W/ 250Vac
Pow er Supply: 85-265Vac/ 18-36Vd c
Input Signal:
20m A, 200m A, 5V, 10V, 20V, 200V
423
Type
Microprocessor
Based Digital Meter
Details of Approval
Application
EN V3 (2002) in
“General Power Distribution
Zones”
Rem arks
Cert. N o.
DESIGN CODE
STAN DARD :
See manufacturer’s specification
Microprocessor
Based Bargraphic
Display Meter
Type:
PB-1471/ 2471 Series
PB-1470/ 1570 Series
424
Type
FIN ETEK CO., LTD .
...continued
Microprocessor
Based Digital Meter
Type:
PM-1430/ 1530 Series
PM-2430 Series
Honeyw ell Marine,
9, rue Isaac N ew ton,
ZA Port Sec N ord,
18000 Bourges,
France.
Type 3801, w ithout
d isplay
Details of Approval
Application
Rem arks
Ad d itional test:
Low Temperature Test : 16
hours at -25°C
Enclosure Test : 3 minutes for
IPX5
(Only front surface)
Rules and Regulations of Ships of Ships 2008
Specification
Pressure range till 2100 m bar or 4000 m bar
115/ 230V
EN V1
EN V2
(2002)
Cert. N o.
15/ 80025(E1)
Exclud ing passenger ships
08/ 30015(E1)
425
Product: Pressure Gauge (Part 1A)
Baumer-Bourdon-Haenni SAS,
125 rue de la Marre,
BP 70214,
41103 Vendome Cedex,
France.
Type
MEX,
MEM
MIX,
MIM,
MEP,
MMN
Details of Approval
Application
Rem arks
Bourd on tube m echanical pressure gauges:
Pressure m easurem ent.
Gauge d iam eter (m m ):
Pressure range (bar):
Com plies w ith EN 837 Part
1:1996
Refer to Bourd on-H aenni d ata sheets
for full d etauils of w orking pressure
ranges for each gauge type and size.
50 to 160
-1 to 1600
Cert. N o.
07/ 00025(E1)
426
Subject: Oil Filtration
Product: Automatic and In-Line Filter (Part 1A)
Bopp & Reuther Messtechnik
GmbH,
Am N euen Rheinhafen 4,
67346 Speyer,
Germany.
Type
N*** and NC***
Details of Approval
Nom. Dia. (mm): DN 15, 25, 50, 65, 80 and 100
Nom. Press. (bar): PN 16, 25 and 40
Acc. producer’s product catalogue
Application
use in flammable liquid and
other systems compatible with
the materials of construction
and classed or intended for
Register
Rem arks
Cert. N o.
07/ 20024(E1)
427
Product: Oil Separators (Part 1A)
Hyundai Instruments Co Ltd,
C-1405, Woolim Lion's Valley,
371-28, Gasan-dong,
Geumcheon-gu,
Seoul, 153-803,
Korea, Republic of.
Type
HDS-FD series
Details of Approval
Fuel oil line sampler
Nominal sizes (inch, mm)
5”(125A)
Pressure rating (MPa)
Mitsubishi Kakoki Kaisha Ltd,
2-1 Ohkaw a-cho,
Kaw asaki-ku,
Kaw askai-city,
Japan.
SJ series
: 2”(50A), 3”(80A), 4”(100A),
6”(150A), 8”(200A), 10”(250A),
12”(300A) & 14”(350A)
: 0 to 1.5
H eavy fuel oil H eavy fuel oil –
380cSt at 50 ºC
700 cSt at 50 ºC
SJ 08
600 at 98 ºC
SJ 10G/ GH
1150 at 98 ºC
720 at 98 ºC
SJ 20G/ GH
1750 at 98 ºC
1150 at 98 ºC
SJ 30G/ GH
3200 at 98 ºC
2050 at 98 ºC
SJ 50G/ GH
4900 at 98 ºC
3150 at 98 ºC
SJ 60G/ GH
5700 at 98 ºC
3700 at 98 ºC
SJ 70G/ GH
6950 at 98 ºC
4500 at 98 ºC
SJ 100G/ GH
10000 at 98 ºC
6450 at 98 ºC
SJ 120G/ GH
11600 at 98 ºC
7450 at 98 ºC
SJ 150G/ GH
14600 at 98 ºC
9400 at 98 ºC
Application
Rem arks
Cert. N o.
Manual valve-setting
continuous-drip sampler to
take the sampling of fuel oil for
determination of compliance
with Annex VI of MARPOL
73/ 78
10/ 10061
06/ 10031(E3)
06/ 10032(E2)
Solid sam ples: JIS Z8901 – class 11
SAMGON G Co Ltd,
1464-2, Songjung-dong,
Kangso-ku,
Busan, 618-270,
Korea, Republic of.
SJ-G series
SJ 10G/ GH
SJ 20G/ GH
H eavy fuel oil 380 cSt at 50 ºC
1150 at 98 ºC
1750 at 98 ºC
H eavy fuel oil 700 cSt at 50 ºC
720 at 98 ºC
1150 at 98 ºC
428
Type
Details of Approval
SJ 30G/ GH
SJ 50G/ GH
SJ 60G/ GH
SJ 70G/ GH
SJ 100G/ GH
SJ 120G/ GH
SJ 150G/ GH
3200 at 98 ºC
4900 at 98 ºC
5700 at 98 ºC
6950 at 98 ºC
10000 at 98 ºC
11600 at 98 ºC
14600 at 98 ºC
Application
Rem arks
Cert. N o.
2050 at 98 ºC
3150 at 98 ºC
3700 at 98 ºC
4500 at 98 ºC
6450 at 98 ºC
7450 at 98 ºC
9400 at 98 ºC
429
SAMGON G Co Ltd
...continued
Type
Details of Approval
Solid sam ples: JIS K2213 – class 11
Application
Rem arks
Cert. N o.
06/ 10032(E2)
430
Subject: Pipe and Pipe Couplings
Product: Bolted Clamp Connectors (Part 1A)
Type
Details of Approval
Application
Rem arks
Cert. N o.
D estec Engineering Ltd.,
Five Mile Lane,
Washingborough,
Lincoln, LN 4 1AF,
‘G’ Range
4-Bolt Clam p Pipe Connectors.
Design Cod es:
ASME VIII, Division 1, Append ix 24
ASME B31.3 1993, Clause 302.3.2
API Specification 6FB.1992
Marine and ind ustrial piping
system s
Ratings calculated in accord ance w ith
Destec softw are, “Stress Analysis to
ASME VIII, Division 1, Append ix 24”
Version 2.221.
95/ 00047(E4)
N ORMA Germany GmbH,
Edisonstraße 4,
63477 Maintal,
Germany.
NORMACONNECT
® GRIP/ GRIP E
+FP*
Locking Slip-on joint coupling for metal pipes consisting of a
stainless steel housing, either st./ st. or plastic insert, two-lip sealing
of either EPDM, NBR, FKM, FPM, st./ st. conical protection ring
and inlay and heavy duty locking trunnions/ hollow trunnions.
Fire resistant cover on request.
For Marine, Offshore and
Ind ustrial piping system s, the
couplings are to be selected
and installed in accord ance
w ith the m anufacturers
recom m end ations.
Expires: 7 May 2016
97/ 20042(E10)
Type
For m arine piping system s,
the coupling are acceptable in
locations specified in the
Rules
for the Classification of Ships,
Part5, Chapter12, Section 2.12,
or the Rules for the
Service Craft Part15, Chapter
1, Section 5.8 for non fire
tested and for ISO19921/
19922 w et fire tested (+FP)
grip type, slip on joints
Specific restrictions for these
couplings are stated below .
For other system s not
m entioned in the Rules , not
listed below or for Offshore
or Ind ustrial system s then
these w ill be consid ered
For m aterial com binations for the
correspond ing m ed ia the prod ucer`s
recom m kend ations and instructions
to be sought.
Marking of the prod ucts to show :
Prod ucer`s nam e or trad e m ark, type
d esignation, m aterial com bination,
size, gasket m aterial, torque and m ax.
w orking pressure or pressure Class.
GRIP +FP
GRIP E +FP
Pipe O.D . (mm)
26.9 to 219.1
26.9 to 219.1
180 to 219.1
273
323.9
355.6
406.4
MAWP (bar)
16
16
10
5.5
3
2.7
2.5
Tem perature Range :-30 °C to +125 °C (EPDM)
for sizes 26,9 m m to 168,3 m m
-20 °C to +80 °C (N BR/ EPDM)
-15°C to 210 °C (FKM/ FPM)
Suitable provision for expansion is to
be made where necessary in each range
of pipes.
The use of FP (fire protected version) is
required for installations according
Part 5, Chapter 12, Table 12.2.7.
431
Type
Details of Approval
Application
Rem arks
Cert. N o.
Restrictions for GRIP/ GRIP E
The couplings are not
acceptable in the follow ing
locations :1. Class 1 piping, CO2,
starting and control air
system s.
432
N ORMA Germany GmbH
...continued
Type
Details of Approval
Application
2. Insid e m achinery spaces of
category A or
ccom m od ation spaces for
:a.
Main lines of inert
gas system s.
Rem arks
Cert. N o.
97/ 20042(E10)
b.
Pipe system s for
flam m a
c.
ble liquid s includ ing
correspond ing vent and
sound ing pipes.
d.
Bilge lines
e.
Cooling w ater and
ballast system s
3.
Steam pipe system s,
except for pipes on w eather
d ecks of oil and chem ical
tankers.
4.
Scuppers and d ischarge
(overboard ). Deck d rains,
except for pipes above the
freeboard d eck.
5.
Pipelines in cargo
hold s, tanks and other spaces
w hich are not easily
accessible.
6.
In pum p room s and
open d ecks for inert gas m ain
and d istribution lines.
7.
Fire m ains, w ater spray
and sprinkler system s.
433
Type
Details of Approval
Application
Rem arks
Cert. N o.
+FP .
locations :1.
Class 1 piping, CO2,
system s.
434
N ORMA Germany GmbH
...continued
Type
Details of Approval
Application
2. Insid e m achinery spaces
of category A or
accom m od ation spaces for
:a. Main lines of inert gas
system s.
Rem arks
Cert. N o.
97/ 20042(E10)
b. Pipe system s for
flam m able liquid s includ ing
sound ing pipes.
c. Bilge lines
3. Steam pipe system s,
tankers.
4
Scuppers and d ischarge
freeboard d eck.
5
Pipelines in cargo hold s,
tanks and other spaces w hich
are not easily accessible.
6
Fire m ain, w ater spray
and sprinkler system s or
sim ilar w hich are not alw ays
filled w ith w ater.
b. Pipe system s for
flam m able liquid s
includ ing
correspond ing vent
and sound ing pipes.
c.
Bilge lines
d . Cooling w ater and ballast
system s
435
N ORMA Germany GmbH
...continued
Type
Details of Approval
Application
3. Steam pipe system s, except
for pipes on w eather d ecks
of
oil and chem ical tankers.
4. Scuppers and d ischarge
freeboard d eck.
Rem arks
Cert. N o.
97/ 20042(E10)
5. Pipelines in cargo hold s,
tanks and other spaces
accessible.
6. In pum p room s and open
d ecks for inert gas m ain
and d istribution lines.
7. Fire m ains, w ater spray and
sprinkler system s.
+FP .
starting
and control air system s.
category A or
-
436
Type
Details of Approval
Application
Rem arks
Cert. N o.
a. Main lines of inert
gas system s.
b. Pipe system s for flam m able
liquid s includ ing
sound ing pipes.
c. Bilge lines
437
Type
Details of Approval
Application
Rem arks
of
(overboard ). Deck d rain s,
freeboard d eck.
N ORMA Germany GmbH
...continued
Cert. N o.
97/ 20042(E10)
w hich
6. Fire m ain, w ater spray and
sprinkler system s or sim ilar
w hich are not alw ays filled
w ith w ater.
NORMACONNECT
® FLEX/ FLEX E
+FP*
N on-locking Slip -on joint coupling for m etal and plastic pipes
consisting of a stainless steel housing, either st. st. or plastic
insert, tw o-lip sealing of either EPDM, N BR, FKM or FPM,
stainless steel conical grip ring and inlay and heavy d uty locking
trunnions/ hollow trunnions
recom m end ations.
Expires: 7 May 2016
Pipe O.D . (mm)
Rules
26.9 to 168.3
180
219.1
273
323.9
355.6
406.4
508
FLEX
FLEX E
MAWP (bar)
16
23.5
13.5
18
13.5
17
12
15
9
13
9
10
7.5
7.5
5.5
97/ 20043(E8)
recom m end ations and instructions to
be sought.
438
N ORMA Germany GmbH
...continued
Type
Details of Approval
609.6
711.2
812.2
1200
Fire Protection FP:
6
5
4.5
3.3
Application
4.5
4
3.2
2
26.9 to 406.4 mm O.D .
flex type, slip on joints
Rem arks
Cert. N o.
97/ 20043(E8)
Restrictions for FLEX/ FLEX E
system s.
category A or
:a.
Main lines of inert
gas system s
e.
Pipe system s for
includ ing
correspond ing vent
f.
Bilge lines
g.
Cooling w ater and
ballast system s
439
Type
Details of Approval
Application
Rem arks
Cert. N o.
of
freeboard d eck.
440
N ORMA Germany GmbH
...continued
Type
Details of Approval
Application
w hich
and
d istribution lines.
10.
Fire m ains, w ater
spray and
sprinkler system s.
Rem arks
Cert. N o.
97/ 20043(E8)
Restrictions for FLEX/ FLEX E
+FP .
starting
category A or
a.
Main lines of inert
gas system s.
b.
Pipe system s for
includ ing
correspond ing vent
441
Type
Details of Approval
Application
Rem arks
Cert. N o.
c.
Bilge lines
of
freeboard d eck.
442
Type
Details of Approval
Application
Rem arks
w hich
w ith w ater.
N ORMA Germany GmbH
...continued
NORMACONNECT
® FLEX Grip/ FLEX
Grip E
+FP
97/ 20043(E8)
Non-locking/ locking Slip-on joint coupling for metal pipes
consisting of a stainless steel housing, either st. st. or plastic insert,
two-lip sealing of either EPDM, NBR, FKM or FPM, st.st. conical
grip ring with teeth, st.st. conical protection ring and inlay and
heavy duty locking trunnions/ hollow trunnions. Fire resistant
cover on requestrequest
recom m end ations.
Expires: 7 May 2016
Pipe O.D . (mm)
26.9 to 168.3
Rules
MAWP (bar)
16
Cert. N o.
99/ 20028(E8)
recom m end ations and instructions to
be sought.
443
Type
Details of Approval
Application
Rem arks
Cert. N o.
Flex/ grip type, slip on joints
444
N ORMA Germany GmbH
...continued
Type
Details of Approval
Application
Restrictions for FLEX Grip/
FLEX Grip E
system s.
Rem arks
Cert. N o.
99/ 20028(E8)
category A or
:a.
Main lines of inert
gas system s.
h.
Pipe system s for
includ ing
correspond ing vent
i.
Bilge lines
Cooling w ater and ballast
system s
of
freeboard d eck.
11.
Pipelines in cargo
hold s,
accessible.
445
N ORMA Germany GmbH
...continued
Type
Details of Approval
Application
12.
In pum p room s and
open
and
13.
Fire m ains, w ater
spray and
sprinkler system s.
Rem arks
Cert. N o.
99/ 20028(E8)
Restrictions for FLEX Grip/
FLEX Grip E +FP .
starting
category A or
a.
Main lines of inert
gas system s.
b.
Pipe system s for
includ ing
correspond ing vent
c.
Bilge lines
446
Type
Details of Approval
Application
Rem arks
Cert. N o.
of
freeboard d eck.
accessible.
447
Type
Details of Approval
Axiflex, Types I, II,
IV, V and VI, and
Axiflex Hinged
Coupling
Axiflex Stepped
coupling
Pipe couplings for plain ended pipes
Nominal diameter (mm):
Axiflex, Types I, II, IV, V and VI:
Axiflex Hinged:
Axiflex stepped:
Maximum Pressure Rating (PN):
of individual couplings.
Victaulic Company,
4901 Kesslersville Road,
Easton,
Pennsylvania, 18040-6714,
(USA).
Rem arks
w ith w ater.
N ORMA Germany GmbH
...continued
Taylor Kerr (Couplings) Ltd,
D israeli House,
12, Aylesbury End,
Old Beaconsfield,
Buckinghamshire, HP9 1LW,
Application
07, 75, 77, 99, 005,
750, 920 & 920N
Industrial piping systems.
NB 40 to 1025mm
NB 40 to 1200mm
NB 100 to 350mm
(steps up to 11mm)
Cert. N o.
99/ 20028(E8)
97/ 00014(E6)
99/ 60180(E4)
For approval conditions see
Cert. 97/ 00014(E6)
16 bar. See manufactures details
Grooved Pipe fittings. w ith Grad e ‘E’ EPDM & Grad e ‘T’ (Type
A) N itrile gaskets(Fire resistant type gaskets as per IACS UR
P2.11) & N itrile gaskets (non -fire tested type)
Refer to Certifiate N o.
99/ 60180(E4) for allow able
16 bar 232 psi
Alternate Place of Production
Victaulic Com pany
Alburtis Facility
8023 Quarry Road
Alburtis, PA 18011 USA
Victaulic Com pany
Victaulic Com pany Polska Sp. Z.o.o.
66-530 Drezd enko, Poland
Woj. Lubuskie
Ul. N iepod leglosci 8
Poland
448
Type
Details of Approval
Application
Rem arks
Cert. N o.
Dalian Bingshan Metal Technology
Co. Ltd .
N o. 9 N ortheast 7th Street
Dalian Econom y & Technology
Developing Zone
Dalian 116600 China
449
Product: Expansion and Slip-on Joints (Part 1A)
Bikar Juntas y Compensadores
S.L.,
Estrada Ezkerribai,
Polígono Industrial Santa
Agueda, nave 3,
48013 Bilbao,
Spain.
Type
B-FLEX
BF-PPS
Details of Approval
Rubber expansion joints:
B-FLEX
Max. tem peratu re (°C):
BF-PPS
Max pressure (bar):
D AID O KIN ZOLKU KOGYO
K.K.,
3-1-77, N ishinagasu-cho,
Amagaski-City,
Hyogo pref., 6609-0805,
Japan.
DAICOUP
Expansion Joint
Expansion bellow s to
overcom e expansion in
m etallic piping system s.
Marine piping system s. See
certificate for applicable
system s.
Cert. N o.
07/ 00009(E1)
approval.
300 to 1600
4 or 10
130 (EPDM rubber)
120 (N itrile rubber)
80 to 1200
2.5 to 10
250
321 stainless steel
Dresser Type (Stand ard Type)
Style 10/ 10N / 11/ 11N , Type B/ L
Maxim um Service Pressure
: 16 bar
N om inal Size
: 25A ~ 800A
Style RX10, Type B/ L
N om inal Size
Rem arks
Expansion joints to overcom e
expansion in m etallic piping
system s.
100 to 300
10
130 (EPDM rubber)
120 (N itrile rubber)
Metallic expansion bellow s:
Max tem perature (°C):
Material:
Application
07/ 00010(E2)
approval.
10/ 10047(E1)
: 16 bar
: 150A ~ 800A
450
Type
Details of Approval
Style 25/ 25N , Type S/ W
N om inal Size
Style 53/ 56/ 58, Type B/ L
N om inal Size
Application
Rem arks
Cert. N o.
: 5 bar
: 40A ~ 400A (Type S)
: 40A ~ 500A (Type W)
: 16 bar
: 40A ~ 800A
451
D AID O KIN ZOLKU KOGYO
K.K. ...continued
Type
Details of Approval
Style 55, Type B/ L
N om inal Size
Application
Rem arks
Cert. N o.
10/ 10047(E1)
: 16 bar
: 40A ~ 100A
Style 10/ 10N / 11/ 11N , Type E
: 5 bar
N om inal Size
: 25A ~ 500A
Style 53/ 56, Type E
N om inal Size
: 5 bar
: 40A ~ 500A
Dresser Type (Fire Resistance Type)
Style 38, Type S/ L/ TP
: 16 bar
N om inal Size
: 25A ~ 800A
Style 10F/ 11F, Type S/ L/ TP
N om inal Size
: 16 bar
: 40A ~ 800A
Sleeve Type (Stand ard Type)
Style 60, Type 5K-FC200/ 10K-FC200
: 5 bar/ 10 bar
N om inal Size
: 40A ~ 350A
Style 60, Type 10K-FC450/ 16K-FC450
: 10 bar/ 16 bar
N om inal Size
: 40A ~ 350A (Type 10K-FC450)
: 80A ~ 350A (Type 16K-FC450)
Style 61, Type 5K/ 10K/ 16K
N om inal Size
: 5 bar/ 10 bar/ 16 bar
: 40A ~ 350A (Type 5K/ 10K)
: 80A ~ 350A (Type 16K)
452
Type
Details of Approval
Style 65, Type 5K/ 10K/ 16K
N om inal Size
Application
Rem arks
Cert. N o.
: 5 bar/ 10 bar/ 16 bar
: 40A ~ 350A (Type 5K/ 10K)
: 80A ~ 350A (Type 16K)
453
G.S High Techer Co Ltd,
1480-10 Songjeong-D ong,
Kangseo-Ku,
Busan, 618-270,
Korea, Republic of.
Type
Details of Approval
CCS series and CLA
series
Slip type expansion joints: CCS series d esignated as convex type
and CLA series d esignated as lug flange ad apter type.
Application
Rem arks
Cert. N o.
shipboard system s
04/ 10022(E2)
Marine Piping Systems
H JB-C : steam, fresh water and
hot water.
H JB-M : exhaust steam , oil
fuel, lubricating oil and
therm al oil.
HJB-F : exhaust gas.
03/ 10002(E2)
N om inal pipe d iam eter (m m ) : 40 to 800
Maxim um w orking pressure (kgf/ cm 2) : 16
Fire endurance tests have been additionally carried out for CCS
series and CLA series in accord ance w ith the requirem ents as
specified in IACS UR P2.11. (Corr.1 April 2007) and ISO
19921/ 19922:2005.
Hae Jo Industrial Co Ltd,
1102-94, Gimhae-daero,
Hallim-Myeon, Gimhae-si,
Gyeongnam, 621-872,
Korea, Republic of.
HJB-C
HJB-M
HJB-F
Expansion Joint
HJB-C type: Control Ring Reinforced Bellows Metallic
Expansion Joint
HJB-M type: Multi Ply Bellows Metallic Expansion Joint
HJB-F type:
Free Single Bellows Metallic Expansion Joint
Nominal Size
HJB-C : 50~350mm
HJB-M : 80~600mm
HJB-F : 80~3200mm
Design Pressure
HJB-C : 19.0 kg/ cm 2
HJB-M : 80~300mm 10 kg/ cm 2
350~600mm 5 kg/ cm 2
HJB-F : 1.0 kg/ cm 2
Design Temperature
HJB-C : 210 °C
HJB-M : 220 °C
HJB-F : 480 °C
454
HKR Co., Ltd.,
#447-2,
Mogok-dong,
Pyeongtaek-si,
Kyeonggi-do, 459-040,
Korea, Republic of.
Type
HSW, HSF, HUF,
HUF_T, HGDP &
HGDS
Details of Approval
Universal & single type m etallic expansion bellow s
H SW type (H KR-EJ-120439):
Location
penetration???
Design tem perature (°C)
N om inal pipe d iam eter (m m )
Convolution pitch/ height (mm)
N um ber of plies
: see Application
: 1
: -163 to +80
: 200A ~ 700A
: 22/ 25 ~ 40/ 40
: 1
Application
Marine use for cargo and
associated piping system s, etc.
in ships constructed for the
carriage of liquefied gases in
bulk at the follow ing
locations:
 N itrogen pressurization
line at tank inlet/ outlet – H SF,
H UF, H UF-T
 Gas line on trunk d eck–
H SF, H UF, H UF-T
Rem arks
Cert. N o.
05/ 10062(E2)
455
HKR Co., Ltd. ...continued
Type
Details of Approval
H SF type (H KR-EJ-120440-1 & H KR-EJ-120440-2):
Location
: see Application
: 10
: -163 to +80
: 40A ~ 700A
Convolution pitch/ height (mm) : 15/ 15 ~ 40/ 40
N um ber of plies
: 2~3
Application
 Gas line in cargo
com pressor room – H SF, H UF,
H UF-T
 Gas line at tank relief valve
outlet– H SF, H UF, H UF-T
 Liquid line in cargo tank–
H SF, H UF, H UF-T
 Trunk d eck penetration –
H SW
 Gas d om e – H GDP, H GDS
Rem arks
Cert. N o.
05/ 10062(E2)
H UF type (H KR-EJ-120441-1 & H KR-EJ-120441-2):
Location
: see Application
: 10
: -163 to +80
: 40A ~ 750A
N um ber of plies
: 2~3
H UF_T type (H KR-EJ-120442-1 & H KR-EJ-120442-2):
Location
: see Application
: 10
: -163 to +80
: 40A ~ 750A
N um ber of plies
: 2~3
H GDP & H GDS type (H KR-EJ-12443 & H KR-EJ-120444):
Location
: see Application
Design pressure (m bar)
: -800
: -163 to +80
N om inal size (m m )
: 1428 & 1465
N um ber of plies
: 1
456
HKS GmbH,
Schonenfahrerstraße 1,
18057 Rostock,
Germany.
Type
Axial Expansion
Joints :
AN, ANX, AF, AFX
Universal Expansion
Joints :
AM, AP, APX
Details of Approval
Application
Stainless steel m ultiple layer expansion joints w ith loose flanges
from carbon steel accord ing to DIN 86044
Nominal
Design
Diameter
Pressure
[mm]
[bar]
DN 200 – DN 2400
1.5
Design
Temperature
[°C]
550
Life Cycles
[-]
As exhaust gas compensators in marine
and offshore systems
classed or intended
for classification with
Lloyd’s Register
Rem arks
Cert. N o.
03/ 20027(E2)
1000
457
Jiangyan Yangzijiang Piping
Outfitting Equipment Co Ltd,
Chengdu Village,
Jiangyan City,
Type
SSJB series
(slip telescopic or
dresser type)
PEJ series
(slip packing or
stuffing type)
Details of Approval
Slip telescopic (dresser) type and slip packing (stuffing) type
expansion joints
SSJB series (slip telescopic type)
Nominal pipe diameter
: 65 to 800 mm
Nominal pressure rating
: 1.6 MPa
Seal materials
: NBR or VITON
PEJ series (slip packing type)
Seal materials
Application
Rem arks
Marine piping systems
For details of specific approved
systems & locations, refer to
certificate
Expansion joints for use in air,
fuel (crude oil, diesel oil and
benzene), exhaust gas, inert
gas, oil (thermal and cargo),
steam (including
condensate), fresh water and
sea water metallic piping
systems.
Expires: 2 May 2020
Cert. N o.
12/ 10035
: 50 to 800 mm
: 1.6 MPa
: graphite with NBR or VITON
Testing standards:IACS UR P2.11 (Rev.2 Corr.1 Apr 2007)
Macoga SA,
Leira, S/N ,
15680 Ordenes,
La Coruna,
Spain.
MWA
MFA
Metallic expansion joints
Working Pressure. PN (bar)
1
2.5
5
10
16
25
40
64
100
160
Max. Diameter (mm)
7000
3600
2800
2000
1600
1400
1200
1000
400
300
00/ 00050(E3)
Refere to certificate for Cond itions of
Approval
458
Prospero Oy,
Tulotie 6,
Finland.
Type
S-W01
Details of Approval
Multiple layer stainless steel chamber axial expansion joint.
Outer bellow cover is depressurised
N om inal
Design Design
Life Cycles
Diam eter
Pressure Tem perature
[m m ]
[bar]
[°C]
[-]
DN 65/ DN 40
10
70
1000
Application
To be used in fuel gas supply
lines on dual fuel engines or
gas engines where flexibility in
axial and lateral direction is
required.
Rem arks
Expires: 08.10.2020
Cert. N o.
15/ 20112
459
Riken Koko Co., Ltd.,
2-11-13, N ishiki-cho, Warabi
City,
Saitama, 335-0005,
Japan.
Type
MKD Series
Details of Approval
Dresser Coupling (Stand ard Type)
N om inal sizes (m m )
: 40 ~ 800
Design pressure (MPa)
: 0.098 ~ 1.57
Application
system s.
Rem arks
Cert. N o.
10/ 10008(E1)
Design Tem perature (°C) : 80 (N BR), 150 (FPM), 110 (EPDM)
Perform ance Tests
1) Tightness test
2) Burst pressure test
3) Vacuum test
Dresser Coupling (Fire Resistance Type)
: 50 ~ 800
: 0.098 ~ 1.57
Design Tem perature (°C) : 80 (N BR), 150 (FPM), 110 (EPDM)
Perform ance Tests
1) Tightness test
3) Vacuum test
4) Fire endurance tests have been additionally carried out in
accord ance w ith the requirem ents as specified in IACS
UR P2.11. (Corr.1 April 2007) and ISO 19921/ 19922:2005
Slid ing Sleeve Coupling (Stand ard Type)
: 25 ~ 350
: 0.49 ~ 1.57
Design Tem perature (°C) : 170 ~ 250
Perform ance Tests
1) Tightness test
460
SFZ S.A.S,
8, rue des freres Lumiere,
69680 Chassieu,
France.
Type
OMEGA ZH (WZH )
Details of Approval
Metallic expansion bellow s
Single or m ultiple layers:
Diam eter (inches):
Application
LN G system s on ships and
LN G term inals
2 to 32
–196 to +125
10
Rem arks
Cert. N o.
04/ 00045(E2)
approval.
461
Shanghai Alafa Marine
Equipment Co., Ltd,
N o. 880 Xinkai River Road,
Xinhe Tow n, Chongming
County,
Shanghai, 202156,
Electric Equipment Co. Ltd.,
N o. 1588 Renmin Village,
N icheng Tow n,
Shanghai, 201306,
Type
PEJ
SEJ
Details of Approval
Expansion joint pipe coupling for plain end ed pipes:
SLG series
PEJ:
Pressure rating (PN ):
65 to 600
16
SEJ:
Pressure rating (PN ):
65 to 750
16
Lloyd’s Register (LR) Rules and Regulations for the Classification
of Ships, (July 2015), Part 5, Chapter 12.
IACS UR P.2.7.4 “Mechanical joints”(Rev.7 Sept 2007)
Nominal diameter
:50 to 900 mm
Maximum working pressure :1.6 MPa (16 bar)
Working temperature
:200 oC
Application
Expansion joints for use in
m etallic piping system s.
Rem arks
Cert. N o.
05/ 00046(E2)
15/ 80039(E2)
Cond itions of Approval for
m arine use.
Marine piping systems:Ballast water, outside
machinery space of category A
Sea water cooling for
machinery
Fresh water cooling for
machinery
Domestic hot and cold fresh
and sea water systems
Fire main and deck washing on
ships where LR is authorised to
act on behalf of the flag
administration
Non-essential service air
Inert gas systems
Sanitary grey water and black
water drainage, but bot
scuppers or overboard
discharges
Fuel lubricating and hydraulic
oil systems, outside machinery
space of category A
Cargo oil within the cargo area
of
462
Type
Details of Approval
Application
Rem arks
Cert. N o.
oil tankers
Tank washing within the cargo
area of oil tankers
Cable conduit piping
All the above subject to
conditions as set forth below
463
Electric Equipment Co. Ltd.
...continued
Type
SLF series
Details of Approval
Lloyd’s Register (LR) Rules and Regulations for the Classification
of Ships, (July 2015), Part 5, Chapter 12.
IACS UR P.2.7.4 “Mechanical joints”(Rev.7 Sept 2007)
Nominal diameter
Maximum working pressure
Working temperature
:65 to 900 mm
:1.6MPa (16 bar)
:-15 to +120 oC
Application
Marine piping systems:Ballast water, outside
machinery space of category A
Sea water cooling for
machinery
Fresh water cooling for
machinery
Domestic hot and cold fresh
and sea water systems
Fire m ain and d eck w ashing
on ships w here LR is
authorised to act on behalf of
the flag ad m inistration
Non-essential service air
Inert gas systems
Sanitary grey water and black
water drainage, but bot
scuppers or overboard
discharges
Fuel lubricating and hydraulic
oil systems, outside machinery
space of category A
Cargo oil within the cargo area
of oil tankers
Tank washing within the cargo
area of oil tankers
Cable conduit piping
All the above subject to
conditions as set forth below
Rem arks
Cert. N o.
15/ 80040(E2)
464
SJM Co., Ltd.,
54, Gongdan 1-daero, 322 beongil, Shiheung-si,,
Gyeonggi-do,,
Korea, Republic of.
Type
Details of Approval
Universal & Single Type Metallic Expansion Bellows
Single type (S-EXP200-2 to S-EXP700-2)
Location: Trunk deck penetration
Design pressure (bar): 1
Design temperature (ºC): -163 ~ +80
Nominal pipe diameter (mm): 200A ~ 700A
Convolution pitch/ height (mm): 15/ 28 ~ 23/ 30
Number of plies: 1
Application
associated piping systems, etc.
in ships constructed for the
bulk at the following locations:

Trunk deck penetration

Cargo and associated
piping systems

Gas dome
Rem arks
Cert. N o.
15/ 40131(E2)
465
SJM Co., Ltd. ...continued
Type
Details of Approval
Single type (S-GD-EXP446-1)
Location: Gas dome
Nominal pipe d iameter (mm): 446
Convolution pitch/ height (mm): 18/ 26
Number of plies: 2
Application
Rem arks
Cert. N o.
15/ 40131(E2)
Single type (S-EXP125-1 to S-EXP800-1)
Location: Cargo and associated piping systems
Number of plies: 2 ~ 3
Universal type (U-EXP50-1 to U-EXP1000-1)
Design pressure (bar): 5~12
Convolution pitch/ height (mm): 10/ 7 ~45/ 45
Reinforced Universal type (U-EXP80-1 to U-EXP700-4)
Convolution pitch/ height (mm): 20/ 17.5 ~ 60/ 57
Universal type (U-EXP250-4)
Nominal pipe diameter (mm): 250A
Number of plies: 4
466
Type
Details of Approval
Application
Rem arks
Cert. N o.
Universal type (U-GD-EXP1430-1 & U-GD-EXP1470-1)
Location: Gas dome
Design pressure (mbar): -800
Nominal pipe diameter (mm): 1430 & 1470
Convolution pitch/ height (mm): 45/ 45 & 45/ 50
Number of plies: 1
467
SJM Co., Ltd. ...continued
Type
Details of Approval
Universal type (15-JBUT-40A-1 to 15-JBUT-750A-1)
Nominal pipe diameter (mm): 40A~ 750A
Convolution pitch/ height (mm): 10/ 8~25/ 27
Number of plies: 2~3
Universal type (15-JUB-125A-1 to 15-JBU-800A-1)
L-Balanced type (15-JBBL-400A-1 to 15-JBF-750A-1)
Gim bal type (15-JBGD-40A-1 to 15-JBGD-80A-1)
Number of plies: 2
Axial type (15-JBF-100A-1)
Nominal pipe diameter (mm): 100A
Number of plies: 4
Application
Rem arks
Cert. N o.
15/ 40131(E2)
468
Stenflex,
Rudolf Stender GmbH,
Robert-Koch-Strasse 17,
22851 N orderstedt,
Germany.
Suzhou Jinyang Piping Fitting
Co., Ltd.,
3rd Wengzhuang Road,
Shanghu Tow n,
Changsu City, 215551,
Type
Axial Com pensators:
SA-10; SA-13;
SF-10; SF-11
Details of Approval
Stainless steel com pensators w ith w eld ing end s or flanges from
carbon or stainless steel.
N om inal
Design
D iam eter
Pressure
[m m ]
[bar]
DN 32 – DN 250
16
DN 300
2.5/ 6
49B
Lateral
Com pensator:
SF-20
(VSSJA)AF series,
B2F series,
(SSJB)AY series
(GSJ)PEJ series
Application
50B
51B
Design
Tem perature
[°C]
20
20
Life Cycles
As compensators in marine and
offshore systems classed or
Lloyd’s Register.
Rem arks
Cert. N o.
01/ 20047(E2)
[-]
1000
1000
Slip type expansion joints
(VSSJA)AF series (flange type)
N om inal pipe d iam eter : 65 to 800 m m
N om inal pressure rating : 1.6 MPa
Seal m aterials
: N BR or FPM
certificate
See certificate for other conditions
13/ 10092
B2F series (d ouble flange type)
Seal m aterials
: N BR or FPM
(SSJB)AY series (gland type)
Seal m aterials
: N BR or FPM
(GSJ)PEJ series (packing type)
Seal m aterials
: carbon fibre w ith N BR or FPM
469
Taiyo Joint Co., Ltd.,
SPK Bldg, 501, 1-9-12,
Matsugaya,
Taito-ku,
Tokyo, 111-0036,
Japan.
Type
F-1 series (dresser
type, 41479)
F-2 series (dresser
type, 41480)
F-3 series (dresser
Details of Approval
Slip type type expansion joints
F-1, F-2 & F-3 series (dresser type)
N om inal pipe d iam eter (m m ) : 25 ~ 800
N om inal pressure rating (MPa) : 1.6
Seal m aterials : N BR or FKM
Application
Rem arks
certificate
Cert. N o.
13/ 10030
470
Taiyo Joint Co., Ltd.
...continued
Type
Details of Approval
type, 41481)
F-R (fire resistant,
dresser type, 111450)
F-SL & F-S series (sleeve type)
N om inal pressure rating (MPa) : 0.5, 1.0, 1.6
Seal m aterials : glass fibre, aram id fibre or graphite
F-SL series (sleeve
type, 41485, 41486 &
41487) (fire resistant,
sleeve type, 101400,
101401 & 101402)
Fire resistant F-R series (dresser type)
N om inal pressure rating (MPa) : 1.6
Seal m aterials : N BR, EPDM or FKM
F-S series (sleeve type,
41488 & 41489) (fire
resistant, sleeve type,
101398 & 101399)
Fire resistant F-SL & F-S series (sleeve type)
N om inal pressure rating (MPa) : 0.5, 1.0, 1.6
Seal m aterials : ceram ic fibre
Application
Rem arks
Cert. N o.
13/ 10030
Taizhou City Zinghai Pipe Co.
LTD ,
Fangniu Village, Louzhuang
Tow n,
Taizhou City 225507,
Jiangsu Province,
PEJ
SSJB
Slip-on m echanical joint w ith resilient seal gland .
Witzenmann GmbH,
Östliche Karl-Friedrich-Straße
134,
75175 Pforzheim,
Germany.
LFZ DN 200 – DN 250
UFZ DN 250
AFZ DN 250
N om inal size (m m ):
DN 65 to DN 700
Design Pressure (Bar):
16
Design Tem perature (˚C):170 (N BR sealing ring);
60 (FPM sealing ring)
Materials:
Bod y: Q235, SUS304, SUS316L
Flange: Q235
Laterial expansion joints
Type
Diam eter (DN )
Design tem perature (0C)
+50
LFZ
200
-50 to +50
5
LFZ
250
-50 to
Marine, Offshore LR Class II
and Class III pipeline as below
ind icated
For d etails of specific
approved system locations,
refer to the certificate.
Shipboard LPG open end ed
piping system s.
14/ 80041
08/ 00014(E3)
Appraisal Docum ent WP11890744
5
471
Type
Details of Approval
Axial m ovem ent
(x-d irection) (m m )
Laterial m ovem ent (H orizontal)
(z-d irection (m m )
Laterial m ovem ent (Vertical)
0
+16/ -38
Application
Rem arks
Cert. N o.
0
±75
472
Witzenmann GmbH
...continued
Type
Details of Approval
(y-d irection) (m m )
±10
Installation tolerance (x-Dirrection) (m m ) ±8
Cyclic fatigue
8000
(Cycles Therm al Movem ent)
Cyclic fatigue
2000000
(Cycles Ship Deform ation 0.3 – 0.5 bar)
Application
±10
±8
8000
Rem arks
Cert. N o.
08/ 00014(E3)
2000000
.
Type
Diam eter (DN )
Design tem perature (0C)
Axial m ovem ent
Laterial m ovem ent (Vertical)
Cyclic fatigue
UFZ
250
-48 to +45
5
Type
Diam eter (DN )
Design tem peratu re (0C)
Axial m ovem ent
Laterial m ovem ent (Vertical
Cyclic fatigu e
AFZ
250
-10 to +130
1
±10
0
±25
8000
±10
0
±10
8000
473
Type
ASZ / BAT
Details of Approval
Multiple layer stainless steel Hydra expansion joint
N om inal
D iam eter
[m m ]
DN 200
52B
53B
54B
Design Design
[bar]
[°C]
3.6
730
Life Cycles
Thermal Extension/ Vibrations
[-]
48000/ 10000000
Application
To be used in exhaust gas lines
at diesel engines where
flexibility in axial and lateral
direction is required.
Rem arks
Cert. N o.
12/ 20026(E1)
474
Witzenmann GmbH
...continued
Type
AFN 06.0110.030.0
Details of Approval
M ultiple layer stainless steel double walled axial expansion joint.
O uter bellow is depressurised
5B
56B
N om inal
D iam eter
[m m ]
DN 110
57B
58B
59B
AFN 10.0100.050.0
Design Design
[bar]
[°C]
10
80
Life Cycles
M ultiple layer stainless steel chamber axial expansion joint.
O uter bellow is depressurised
61B
N om inal
D iam eter
[m m ]
DN 100
63B
64B
M43 – FKM
VM43 - FKM
Design Design
[bar]
[°C]
10
60
Life Cycles
N om inal
D iam eter
[m m ]
DN 50
6B
67B
Design Design
[bar]
[°C]
16
150
Cert. N o.
required.
12/ 20034
required.
12/ 20049
As fuel supply pipe to fuel
injection pumps of Caterpillar
MaK diesel engines
13/ 20014
[-]
2000000
Fuel pipe with expansion joints
65B
Rem arks
[-]
1000
60B
62B
Application
Life Cycles
[-]
10000
475
Type
ABN 10.0150.024.0
Details of Approval
N om inal
Diam eter
[m m ]
DN 150
Design Design
[bar]
[°C]
10
50
Life Cycles
Application
required.
Rem arks
Cert. N o.
15/ 20040
[-]
2000000
476
Witzenmann GmbH
...continued
Type
GFZ
Details of Approval
Multiple layer stainless steel H yd ra elbow expansion joint.
Design pressure:
Max. tem perature:
Sizes:
Bend ing Angle:
Wuxi Jinchang Piping & Valve
Co., Ltd,
Yangjian Tow n,
Xishan D istrict,
Wuxi City, 214107,
SSJB series
(gland type or dresser
type)
PEJ series
(packing type or
sliding sleeve type)
12 bar
160°C
DN 32 - 50
+ 5°
Gland type (dresser) type and packing (sliding sleeve) type
expansion joints
SSJB series (gland type)
Seal materials
: 65 to 800 mm
: 1.6 MPa
: NBR or FPM(VITON)
PEJ series (packing type)
Seal materials
: 50 to 750 mm
: 1.6 MPa
: graphite / NBR or FPM(VITON)
Application
To be used in fuel supply lines
at d iesel engines w here
flexibility in all planes is
required .
Rem arks
Cert. N o.
97/ 20032(E2)
12/ 10069
certificate
Lim itations:
Expansion joints are not to be
used for LN G and cryogenic
system s.
Wuxi Jinyang Piping Fitting Co
Ltd.,
Yangjian Tow n,
Wuxi City 214107,
Jiangsu Province,
B2F
Slip type expansion joints w ith resilient seal gland .
N om inal pip d iam eter(m m ): 65-1000 (PN 0.6,PN 1.0MPa)
65-800 (PN 1.6MPa)
N om inal pressure rating (MPa): PN 0.6, PN 1.0, PN 1.6
Tested to IACS UR P2.11 Rev.3, Aug. 2012
13/ 80006(E1)
477
Type
PEJ
SSJB
Details of Approval
Slip type expansion joints w ith resilient seal gland .
N om inal d iam eter
(m m )
(MPa)
PEJ 50 to 750
1.6
SSJB 50 to 1000
1.6
Application
Rem arks
Cert. N o.
13/ 80010(E1)
Tested to IACS UR P2 Rev.3, Aug. 2012
478
Product: Expansion Bellow s (Part 1A)
Belman A/S,
Oddesundvej 18,
6715 Esbjerg N ,
D enmark.
Type
Axial - AX1S, AX2S,
AX1F, AX2F
Belm an steel expansion bellow s for absorption of axial, angular,
lateral and universal m ovem ents.
Angular - AN 1S,
AN 2S, AN 1F, AN 2F
Ratings:
Design tem perature :
Lateral - LA1S,
LA2S, LA1F, LA2F
Design pressure :
Design cycle:
N om inal Diam eter :
Inner Sleeve:
Materials :
Universal UN 1S,UN 2S, UN 1F,
UN 2F
D ong-A Valve Ind.,
1579-3 Songjung-D ong,
Kangseo-Gu,
Busan,
Korea, Republic of.
Details of Approval
Dual Plate check
valves for cryogenic
services
(Type: DA-DPC)
Application
Rem arks
For use in m etallic cargo
piping system of LPG/ LN G
carriers.
system s in ships for carrage of
liquefied gases in bulk
Cert. N o.
12/ 00088(E1)
-165 °C to +125°C
10 barg
8000
DN 40 to DN 400
With or w ithout inner sleeve
1.4301/ 304, 1.4306/ 304L, 1.4401/ 316,
1.4404/ 316L, 1.4541/ 321, 1.4550/ 347
Dual Plate check valves for cryogenic services
N om inal sizes (inch)
: 8” to 24”(Flange Type)
: 6”
(Lug Type)
150LB (bar)
: 19
Tem perature range (ºC)
: -196 to + 426
14/ 40005(E2)
PERFORMAN CE TEST
H yd rostatic test of valve bod ies at a pressure equal to 1.5 tim es
the m axim um w orking pressure
Seat leak test at a pressure equal to 1.1 tim es the m axim um
w orking pressure
Cryogenic tests consisting of valve operation and leakage
verification in accord ance w ith BS6364:1984
479
Type
Details of Approval
Application
Metal expansion bellow s:
D uro D akovic Kompenzatori
d.o.o.,
D r. Mile Budaka 1,
35000 Slavonski Brod,
Croatia.
N ominal
D iameter (mm)
SB 8491 Type A
SB 8494 Type A
SB 8492 Type A
SB 8496 Type A
SB 8493
&B
&B
&B
&B
40 to
40 to
40 to
40 to
50 to
300
300
300
300
300
Max. w orking
pressure (bar)
6
6
10
10
6
piping system s.
Max. w orking
temperature (°C)
200
200
200
200
200
Refer to certificate for full
d etails.
Rem arks
Cert. N o.
91/ 00049(E4)
N ot to be used as a vibration
d ecoupling d evice.
Materials for bellow s for Class II
piping system s are to be
m anufactured and tested in
accord ance w ith the appropriate
requirem ents of the Society’s ‘Rules
480
D uro D akovic Kompenzatori
d.o.o. ...continued
Type
SB 8495
SB 8499
SB 8139
SB 8140
SB 8144
SB 8141
SB 8142
SB 8143
Details of Approval
50 to 300
50 to 300
65 to 250
300 to 1200
1300 to 2000
1300 to 2000
65 to 250
300 to 1200
10
16
1
1
1
1
1
1
Application
100
100
500
500
500
500
500
500
Double m etal expansion bellow s.
N ominal
D iameter (mm)
Max. w orking
pressure (bar)
SB 8148
SB 8146
SB 8145
SB 8147
SB 8499 Types A & B
SB 8498
1300 to 2000
1300 to 2000
65 to 1200
65 to 1200
50 to 300
50 to 300
1
1
1
1
6
6
SB8500
Tied d ouble m etal expansion bellow s.
50 to 150
30
Max. w orking tem perature (°C): 80
piping system s.
Max. w orking
temperature (°C)
Refer to certificate for full
d etails.
500
500
500
500
200
100
Rem arks
Cert. N o.
for the Manufacture, Testing and
Certification of Materials’
91/ 00049(E4)
91/ 00235(E4)
N ot to be used as a vibration
d ecou pling d evice.
Com pressed air system s
91/ 00239(E4)
N ot to be used as a vibration coupling
d evice.
481
Eagleburgmann Bredan
Expansion Joint Solution,
Odinsvej 1,
6950 Ringkobing,
D enmark.
Type
AX, LA, AN , UN ,
DX
Details of Approval
Metallic expansion bellow s
Diam eter (m m ):
40 to 600
< 25
Application
Marine piping system s in
accord ance w ith LR Design
Appraisal Docum ent no. PSG
I-26883 for the follow ing
services:
Rem arks
Expires: 8 May 2016
Cert. N o.
01/ 00077(E3)
482
Type
Details of Approval
Rem arks
Diesel engine exhaust
Steam and cond ensate
Fresh w ater cooling
Sea w ater cooling
Fuel oil, lube oil, cargo oil
Therm al oil
Eagleburgmann Bredan
Expansion Joint Solution
...continued
US, UM, UT & UR
Metalic expansion joints:
Diam eter (DN ):
US:
UM, UT & UR:
Pressure (bar):
US:
UM, UT & UR:
Tem perature (°C): US:
UM, UT & UR:
Hae Jo Industrial Co Ltd,
1102-94, Gimhae-daero,
Hallim-Myeon, Gimhae-si,
Gyeongnam, 621-872,
Korea, Republic of.
Application
HJB-CO, HJB-Ti, HJBGR, HJB-CA, HJB-OT
Cert. N o.
01/ 00077(E3)
Expansion joints for m arine
engine exhaust gas system s
01/ 00160(E3)
Metallic compensators for
marine diesel engine piping
systems:
08/ 10062(E1)
40 to 2200
40 to 1200
2.5
4.0
-10 to +550
-10 to +650
Bellows Type Metallic Compensators.
Nominal sizes (mm): 250 ~ 550 (HJB-CO)
90 ~ 1600 (HJB-Ti)
700 ~ 2000 (HJB-GR)
150 ~ 600 (HJB-CA)
50 ~ 100 (HJB-OT)
Max. allowable pressure (MPa): 0.45 (HJB-CO/ Ti/ GR/ CA)
0.5 (HJB-OT)
Max. allowable temperature (ºC): 550 (HJB-CO/ GR)
600 (HJB-Ti)
250 (HJB-CA)
100 (HJB-OT)
 Exhaust gas systems –
cylinder outlet(HJB-CO)
 Exhaust gas systems - turbocharger (HJB-TI)
 Exhaust gas systems – gas
receiver (HJB-GR)
 Charging air systems (HJBCA)
 Cooling w ater and
lubricating oil system s(H JBOT)
483
Type
HJB-FXA
HJB-FXB
Details of Approval
Application
Metallic flexible hose assemblies consisting 2 ply austenitic stainless
steel corrugated metal element with 2 ply wirre braire protection.
Piping components to
movement between various
items of machinery connected
to permanent piping systems in
oil, compressed air , fresh water
services, etc.
Rem arks
Cert. N o.
09/ 10005(E1)
484
Type
Details of Approval
Application
Rem arks
HJB-FXA:
Nominal sizes (mm): 15 ~ 80 (PN10)
100 ~ 300 (PN30)
Max. working pressure (MPa): 3.0 (DN15~DN80)
1.0 (DN100~DN300)
Service temperature range (ºC): -20 ~ +250
Hae Jo Industrial Co Ltd
...continued
Cert. N o.
09/ 10005(E1)
HJB-FXB:
Nominal sizes (mm): 15 ~ 80 (PN30)
Max. working pressure (MPa): 3.0 (DN15~DN80)
Service temperature range (ºC): -20 ~ +150
ISO 10380:2003
Hanjo Co. Ltd,
#141-127, 3ga, N amhang-dong,
Youngdo-gu,,
Busan, 606-033,
Korea, Republic of.
HJ-BW
HJ-FS
HJ-FU
HJ-TR
Metallic bellow s type expansion joints.
Butt-Welded Type Expansion Bellows (HJ-BW)
Construction details : Single, unreinforced
Design pressure (bar) : 5
Design temperature (ºC) : -163 ~ +100
Number of plies ; 1 or 2 or 3
Marine use for cargo associated
piping system etc. in ships
constructed for the carriage of
liquefied gases in bulk
14/ 40007
Flanged Single Type Expansion Bellows (HJ-FS)
Construction details : Single, unreinforced
Design pressure (bar) : 10
Number of plies ; 2 or 3 or 4
485
Type
Details of Approval
Application
Rem arks
Cert. N o.
Flanged Universal Type Expansion Bellows (HJ-FU)
Construction details : Universal, unreinforced
Design pressure (bar) : 5 (for 100A-250A)
10 (for 300A-700A)
Nominal pipe d iameter (mm): 100A ~ 700A
Number of plies ; 1 or 2 or 3 or 4
486
Type
Application
Rem arks
Tie-Load Type Expansion Bellows (HJ-TR)
Construction details : Universal, unreinforced
Design pressure (bar) : 12 (for 40A-150A)
10 (for 200A-700A)
Convolution pitch/ height (mm) : 14/ 14.5 ~ 32/ 32
Number of plies ; 1 or 2 or 3 or 4
Hanjo Co. Ltd ...continued
HKR Co., Ltd.,
#447-2,
Mogok-dong,
Pyeongtaek-si,
Kyeonggi-do, 459-040,
Korea, Republic of.
Details of Approval
Universal type expansion bellow s
H UF, H UF_T_G &
H UF_T_H
H UF type (H KR-EJ-1212300):
:
:
N om inal pipe d iam eter (m m ) : 400
Convolution pitch/ height (m m )
N um ber of plies
: 2
0.5
-163 to +80
Cert. N o.
14/ 40007
associated piping system s in
ships constructed for the
bulk.
14/ 10024
: 35/ 35
H UF_T_G type (H KR-EJ-1212301 ~ H KR-EJ-1212321):
:
1.0
:
-163 to +80
: 20/ 20 ~ 40/ 40
N um ber of plies
: 2~3
H UF_T_H type (H KR-EJ-1212322):
:
:
N om inal pipe d iam eter (m m ) : 400
N um ber of plies
: 2
1.0
-163 to +80
: 35/ 35
487
Jiangsu Yangzijang Cable
Manufacture Ltd,
Zhuyun Village,
Jiangyan Tow n,
Jiangyan D istrict,
Taizhou City, 225500,
Jiangsu Province,
Type
CB613-81
CBM33-81
CBM1033-81
GB/ T12522-1996
series:(Type:
A,AS,BS)
CB/ T1153-2008
series (Type: A,AS,
BS)
Details of Approval
Metallic bellows type expansion joints
GB/ T12522-2009_A & _AS
Construction details : 1 ply (DN65 to DN150)
2 plies (DN200 to 500), unreinforced
Nominal Pipe Diameter (mm) : 65 to 2000
Design Pressure (MPa) : 0.1
Application
Marine Piping Systems:1.Steam pressure piping
system s
2.Exhaust gas piping system s
3.Other pressure piping
system s
Rem arks
Cert. N o.
14/ 80001(E1)
488
Type
Details of Approval
Application
Rem arks
GB/ T12522-1996_BS
Construction details : 2 plies, unreinforced
Jiangsu Yangzijang Cable
Manufacture Ltd ...continued
Cert. N o.
14/ 80001(E1)
CB1153-2008_A & _AS
Construction details : 2 plies, unreinforced, loose flanges
Design Pressure (MPa) : 0.4, 0.6, 1.0, 1.6
CB1153-2008_B & _BS
Construction details : 2 plies, unreinforced, welded flanges
Design Pressure (MPa) : 0.6, 1.0, 1.6
CB613-81, CBM1033-81 & CB33-81
Construction details : 1 ply (DN150 & below)
2 plies (DN200 & above), unreinforced
JIB Tech Co., Ltd,
#415-2, Ugye-ri,
Sangdong-myeon,
Gimhae-si,
Korea, Republic of.
JIB-FLEX-E
JIB-FLEX-S
JIB-FLEX-D
JIB-FLEX-HS
Austenitic stainless steel metallic expansion bellows
JIB-FLEX-E : 2 kg/ cm 2 single expansion bellows
Nominal size (mm) : 80 ~ 4400
Design pressure (kg/ cm 2) : 2
Design temperature (°C) : 550
Marine piping systems for the
following services:
Exhaust gas pipe

Exhaust steam line

Main steam dump to
condenser

Main turbine lubricating
oil return line
11/ 10108
JIB-FLEX-S : 10/ 5 kg/ cm 2 single expansion bellows
Design pressure (kg/ cm 2 ) : 10 (except 600 mm), 5 (600 mm)
489
Type
Details of Approval
Application
Rem arks
Cert. N o.
JIB-FLEX-D : 10/ 5 kg/ cm 2 double expansion bellows
Design pressure (kg/ cm 2) : 10 (except 600 mm), 5 (600 mm)
490
Type
99- 7862 ~ 68
Universal Type Expansion Bellow s
N om inal Pipe Diam eter - 200, 250, 350,
400, 450 & 500 m m
Design Pressure: 1 MPa (10 bar)
Design Tem perature: -163°C to +80°C
99-7869 ~ 70
Universal Type Expansion Bellow s
N om inal Pipe Diam eter - 600 & 650 m m
Design Pressure: 1 MPa (10 bar)
Design Tem perature: -163°C to +80°C
Prospero Oy,
Tulotie 6,
Finland.
Application
Rem arks
JIB-FLEX-HS : 22 kg/ cm 2 single expansion bellows
Design pressure (kg/ cm 2) : 22
JIB Tech Co., Ltd ...continued
M.E.S. Tokki Co., Ltd.,
3-6-1 Tamahara,
Tamano,,
Okayama, 706-0014,
Japan.
Details of Approval
PRRN -1;
PRRA-2
Metallic flexible bellow s for LN G fuel storage tanks:
PRRN -1:
PRRA-2:
All except DN 800:
DN 800:
Design Tem perature (0C):
80, 125 & 150
250 & 800
Cert. N o.
11/ 10108
associated piping system in
carriage
of liquefied gases in bulk
95/ 10021(E4)
associated piping system in
carriage
of liquefied gases in bulk
95/ 10022(E4)
For use in piping system s in
liquid and gas feed from LN G
tanks
13/ 00062
approval
10
1
–196 to +60
491
Type
S-W11, S-W16, S-W18
Details of Approval
N om inal
Design Design
Life Cycles
Diam eter
[m m ]
[bar]
[°C]
[-]
DN 50/ DN 32
10
70
1000
Application
required.
Rem arks
Cert. N o.
15/ 20071
492
Senior Berghöfer GmbH,
Frankfurter Straße 199,
34121 Kassel,
Germany.
Type
Universal
Compensator
Details of Approval
Water cooled expansion joint consisting of stainless steel bellows
with black steel flanges on both ends.
FZ-24-0016
FZ-24-0122
FZ-24-0155
Taizhou Bellow s Factory,
N o. 98 Jiangping East Road,
Kouan Tow n,
Taizhou City,
Jiangsu Province,
TBAS100~2000,
N om .
Diam eter
[m m ]
125
175
100
150
125
175
inner
outer
inner
outer
inner
outer
Design
Pressure
(bar)
4
4
4
4
4
6
:
:
:
:
Rem arks
Cert. N o.
As expansion joints in ex-haust
gas piping systems on ships or
offshore installa-tions classed
or intended for Classification
with Lloyd´s Register.
08/ 20054(E2)
TBAS100~2000 type:Exhaust gas piping system s
13/ 10031
Design
Tem p.
[°C]
250
150
250
150
250
150
Stainless Steel Bellows Expansion Joints
TBAS100~2000 type
Construction details
Design pressure
Maxim um tem perature
TBAS(BS) 6(10, 16)
065~500
Application
1 ~ 3 plies, unreinforced
100 ~ 2000 mm
0.1 MPa
550 °C
TBAS(BS) 6(10, 16) 065~500 type
Construction details
: 1 ~ 3 plies, unreinforced,
loose flanges (AS type),
welded flanges (BS type)
: 65 ~ 500 mm
Design pressure
: 0.6, 1.0, 1.6 MPa
Maxim um tem perature
: 200 °C
TBAS(BS) 6(10, 16) 065~500
type:Oil, Fresh w ater, Com pressed
Air, Steam & Sea w ater p iping
systems
493
Technoflex Corporation,
1-5-1, Kuramae,
Taito-ku,
Tokyo, 111-0051,
Japan.
Type
LUS053-2996 (single
type),
LUD053-2997 (double
type)
LBS053-2998
(balanced A type)
LBL053-2999
(balanced B type)
Details of Approval
Bellows type expansion joints for LNG and LPG carriers
Design Pressure (MPa)
Design Tem perature (°C)
Convolution pitch/ height (mm)
N um ber of plies
Inner ply m aterial
Outer ply m aterial
Cum ulative Usage Factor
:
:
:
:
:
:
:
:
1.0
-163 to +80
150A ~ 800A
35/ 40
2
SUS316L or SUS304L
SUS836L or Inconel 625/ 825
≤ 0.97
Application
bulk
Rem arks
Cert. N o.
06/ 10012(E2)
494
Technoflex Corporation
...continued
Type
Details of Approval
273482
Universal type expansion bellow s w ith butt w eld ing type
bellow s to pipe joints
9673386
Universal type expansion bellow s w ith lap butt w eld ing type
bellow s to pipe joints
Design Pressure
Design Tem perature
Cum ulative Usage Factor
15/
25/
40/
50/
15
25
40
50
Application
Rem arks
Cert. N o.
bulk
93/ 10005(E5)
bulk
93/ 10021(E5)
For use in marine piping
systems.
15/ 80033
: 1.0 MPa
: -163°C to +80°C
: 0.5
Universal & Axial Type Expansion Bellow s
Design Pressure : 1.0 MPa
Design Tem perature : -164°C to +80°C
Cum ulative Usage Factor : 0.022 (15/ 15)
0.525 (25/ 25)
0.5 (40/ 40 & 50/ 50)
Convolution Pitch/ Height (mm) : 15/ 15, 25/ 25, 40/ 40 & 50/ 50
N om inal Pipe Diam eter (m m ) : 50, 80, 100 & 125 (15/ 15)
50 to 125 (25/ 25)
150 to 550 (40/ 40)
600 to 800 (50/ 50)
WITZEN MAN N BEN ELUX
N .V.,
Terstratenw eg 13,
Oelegem Ranst,
B-2520,
Belgium.
ARN
ARN
ARN
ARN
ARN
ARN
ARN
ARN
ARN
16.0016.018.0
16.0025.018.0
16.0032.018.0
16.0040.018.0
16.0050.018.0
16.0065.018.0
16.0080.018.0
16.0100.018.0
16.0150.048.0
Metal Bellows Expansion Joints :
Ratings:
Nominal diameter:
Material:
approval.
DN16 to DN150
-165 to 50
16
316Ti (AISI)
316L (AISI)
495
Wuxi Jinbo Vibration Isolation
Technologies Co Ltd,
69 Zhujiang Road,
N ew Wuxi D istrict,
Wuxi City 214028,
Jiangsu Province,
Type
CB613-81
CBM33-81
CBM1033-81
GB/ T12522-2009
series (Type: I A,I
AS,I BS)
CB/ T1153-2008
series (Type: A,AS, B,
BS)
Details of Approval
Pipe DN
(mm)
CB613-81
CBM33-81
CBM1033-81
GB/ T12522-96
Series (unreinforced):
A Type, AS Type and
BS Type
CB1153-93 Series (2 or
3
Plies,
unreinforced):A Type, B Type, AS
Type and BS Type
Design Max. Temp
pressure (°C)
bar
Exhaust gas piping system :
CB613-81
CBM33-81
CBM1033-81
GB/ T12522-2009
(Type: I A,I AS,I BS)
65-1500
0.5
550
GB/ T12522-2009,
Type: I A
GB/ T12522-2009,
Type: I AS
65-500
1.0
600
65-1000
1.0
550
Water piping system s and
open end ed lines: CB/ T11532008 (Type: A,AS)
GB/ T12522-2009,
Type: I BS
1000-2000
0.5
350
Sea w ater, fresh w ater, oil&
steam piping system s:
CB/ T1153-2008 (Type: B, BS)
50-500
6,10,16
205
CB/ T1153-2008
Type: A, AS, B, BS
WuXi YanQiao Bellow Factory,
#586-6, Chunhui Road,
Huishan D evelopment Zone,
Wuxi,
Jiangsu, 214177,
Application
Metallic bellow expansion joints
Ratings
1.GB/ T12522-96 Series:
Nominal Pipe Diameter (mm): 65-2000;
Design Pressure (MPa): 0.05 & 0.1
2.CB1153-93 Series:
Nominal Pipe Diameter (mm): 50-500
Design Pressure (MPa): 0.4, 0.6, 1.0 & 1.6
1.Exhaust gas piping systems
(GB/ T12522-96 Series)
2.Fresh water (CB1153-93
Series)
3.Steam pressure piping
systems (CB1153-93 B & BS
Types only)
4.Oil piping systems (CB115393 B & BS Types only)
Rem arks
Cert. N o.
13/ 80009(E1)
15/ 80028(E2)
496
Product: Flange Couplings (Part 1A)
Galperti Engineering & Flow
Control S.p.A.,
Via Prati della Rosa, 17,
23823, Colico (LC),
Italy.
Type
G-Lok
Details of Approval
Application
Mechanical joints used in piping system s:
Offshore and petrochem ical
piping system s
Stand ard or heavy d uty hubs.
Stand ard , heavy d uty or lightw eight clam ps
N om inal pipe d iam eter (inch):
Rem arks
Cert. N o.
11/ 00051(E1)
Refer to certificate for list of approved
m aterials of m anufacture
0.5 to 38
Refer to Galperti for pressure/ tem perature ratings
Lokring Technology LLC,
38376 Apollo Parkw ay,
Willoughby,
Ohio 44094,
(USA).
Elastic Strain Preload
(ESP)
Low Temperature
Carbon Steel - 333
Process Fittings for
sour service and
Carbon Steel pipe
fittings (MAS) for
non-sour service.
Size LTCS 1/ 2” to 4”
Pressure- Temperature rating
according to manufacturers product literature FS-333-062411
MAS 4”
Pressure- Temperature rating
according to manufacturers product literature FS-3000-062411
Industrial and Offshore
applications LTCS products for
Sour Service and MAS for nonsour service.
See DAD 10/ 60002 (E1) for
application limitations
10/ 60002(E1)
497
Product: Flange Gasket (Part 1A)
Cartec Sealing Technologies
Co., Ltd,
N o.12B-4L/1480-2,,
Songjung-dong,,
Kangseo-Ku,,
Busan, 680-270,
Korea, Republic of.
Type
CGI
Details of Approval
Application
Spiral Wound Gasket for Cryogenic Service
Nominal size
: 1/ 2” – 36” (15A – 900A
N.D.)
Nominal pressure class
: AN SI 150LB & AN SI 300LB
Minim um Working Temperature : -196°C
Rem arks
Cert. N o.
Marine Piping System s for
Cryogenic Service for LNG
Carrier
06/ 10088(E1)
system for w ater, oil air and
steam fluid
10/ 10004
LR Rules and Regulations for the Classification of Ships, Part 5,
Chapter 12, July 2010
ASME B16.20
JEIL E&S Co., Ltd.,
39-5, Yusan-D ong, YangsanCity,,
Kyungnam, 626-230,
Korea, Republic of.
JIC 6000, JIC 6200 &
JIC6400
Com pressed N on-Asbestos Sheet & Gasket
JIC 6000:
Sheet thickness
Maxim um lim its of w orking
JIC 6200:
Sheet thickness
pressure
tem perature
: 0.5 ~ 3.2 m m
: 3.0 MPa
: 350 °C
pressure
tem perature
: 0.5 ~ 3.2 m m
: 6.0 MPa
: 430 °C
JIC 6400:
Sheet thickness
: 0.5 ~ 3.2 m m
Maxim um lim its of w orking pressure
: 5.0 MPa
Maxim um lim its of w orking tem perature
: 480 °C
N ote: The m anufacturer’s applications are to be com plied w ith.
LR Rules and Regulations for the classification of ships, Part 5,
ASTM F104 F712100-E23M5
498
JEIL E&S Co., Ltd.,
309 Chungnyeol-ro,
Yangsan-si,
Korea, Republic of.
Type
LEAKBLOK®
Details of Approval
Compressed Non-Asbestos Sheet & Gasket
Sheet Thickness (m m ): 0.8~3.2
Short-term peak : 350°C
Maxim um continuous : 220 °C
Short term peak : 80 kg/ cm ²
PH range : 4-11 above is general range and has no guarantee for
every case.
The prod ucer’s “Rem ark & Warning”are to be com plied w ith.
Application
Rem arks
Cert. N o.
Marine piping system
-. H ot oil & oil gas :
Below 20 kg/ cm ² at 260 °C
-. Fresh w ater, alkali, sea
w ater : Below 30 kg/ cm ² at
260 °C
-. Organic solvent :
Below 20 kg/ cm ² at 260 °C
-. Steam Service :
Below 10 Kg/ cm ² at 180 °C
14/ 40001
Ind ustrial field s, used as
protection of corrosion &
electrical insulation in pipeline
14/ 40004
Lloyd’s Register Rules and Regulations for Classification of Ships,
Part 5, Chapter 12, Section 5, July 2013
ASTM F104/ F36/ F146/ F152
JIC 9210 - ER,
JIC 9230 - ES,
JIC 9320 - OS,
JIC 3850 - SE(HT)
Insulation Gasket set
Manufacturer’s prod uct specification N o. JIC 9210 - ER, JIC9230
-ES, JIC9320 - OS, JIC38 0 - SE(H T)
Core Thickness
Pressure
JIC 9210-ER
Basic 4.0 m m
(4.0~8.0 m m available)
Max.AN SI 600LB
JIC 9230-ES
Basic 3.2 m m
(3.0 ~ 8.0 m m available)
Max.AN SI 600LB
JIC 9320-OS
Basic 6.6 m m
Max.AN SI 2500LB
JIC3850-SE(H T)
Basic 3.0 m m
Max.AN SI 2500LB
N ote : The prod ucer’s catalogue to be consulted for m axim um
pressure and tem perature ratings.
499
JEIL E&S Co., Ltd. ...continued
Type
JIC 9320-OFS
Details of Approval
Manufacturer’s prod uct specification N o. JIC 9320-OFS
Core Thickness
Pressure
JIC 9320-OFS
Basic 6.6 m m
(6.0~8.0m m available)
Max. AN SI 2500LB
Application
Rem arks
Cert. N o.
Ind ustrial field s, used as
protection of corrosion &
electrical insulation in pipeline
14/ 40012
system for water, oil, air and
steam fluid
07/ 10062(E1)
For EPDM, SILICONE &
VITON seats: marine piping
systems for services and
locations listed for approved
fire resistant and non-approved
fire resistant types in Part 5,
14/ 40008
Representative samples tested in
accordance with the manufacturer’s
test specifications
N ote : The prod ucer’s catalogue to be consulted for m axim u m
pressure and tem perature ratings.
TAEHWA KALPA SEAL CO.,
2L-88B 1727-2,
Songjung-D ong, Kangseo-Ku,
Busan, 618-210,
Korea, Republic of.
TH3000
Compressed Non-Asbestos Joint Sheets
Sheet thickness
: 0.5 ~ 3.0 m m
Maximum limits of working pressure
: 3.0 MPa
Maximum limits of working temperature : 350 °C
The manufacturer’s “Pressure/ Temperature Operating
Guidelines” are to be complied with.
LR Rules and Regulations for the classification of ships, Part 5,
KSL 5406 (Class B), JIS R 3453 (Class B), ASTM F104 P3441A
Young N am Metal Co., Ltd,
12-3, Jillye-ro, 74beon-gil,
Jillye-myeon,
Gimhae-si,
Korea, Republic of.
Grip Ring Stand ard
Type:GR-S
Grip Ring Long Size
Type:GR-L
Flexible pipe coupling.
N om inal d iam eter, N D (A)
Type
N D (A)
GR-S Series
20 to 350
GR-L Series
25 to 350
Nominal Dia. (mm)
20 – 40
50 – 65
80 – 100
125 – 150
200
250
300-350
Working Pressure (MPa)
2.0
1.8
1.6
1.4
1.2
1.0
0.7
12.2.7 of Lloyd’s Register (LR)
Classification of Ships and
similar offshore and industrial
use in piping systems.
500
Type
Details of Approval
Temperature Range
EPDM
NBR
SILICONE
VITON
Young N am Metal Co., Ltd
...continued
Multi Flex Standard
Type: MF-RS
Multi Flex Long Size
Type: MF-RL
-30 °C to +90 °C
-20 °C to +70 °C
-50 °C to +250 °C
-30 °C to +230 °C
Flexible pipe coupling.
N om inal d iam eter, N D (A)
Type
N D (A)
MF-RS Series
15 to 350
MF-RL Series
25 to 350
Nominal Dia. (mm)
15 – 40
50 – 65
80 – 100
125 – 150
200 -250
300-350
Temperature Range
EPDM
NBR
SILICONE
VITON
Working Pressure (MPa)
2.0
1.8
1.6
1.4
1.2
1.0
-30 °C to +90 °C
-20 °C to +70 °C
-50 °C to +250 °C
-30 °C to +230 °C
Application
Rem arks
For NBR seats: marine piping
locations listed for nonapproved fire resistance types
in Part 5, Chapter 12, Section 2,
Table 12.2.7 of Lloyd’s Register
(LR) Rules and Regulations for
the Classification of Ships and
For EPDM, SILICONE &
VITON seats: marine piping
locations listed for approved
fire resistant and non-approved
fire resistant types in Part 5,
Cert. N o.
14/ 40008
14/ 40009
12.2.7 of Lloyd’s Register (LR)
Classification of Ships and
For NBR seats: marine piping
locations listed for nonapproved fire resistance types
in Part 5, Chapter 12, Section 2,
Table 12.2.7 of Lloyd’s Register
(LR) Rules and Regulations for
the Classification of Ships and
501
Product: Flanged Connectors (Part 1A)
Type
Details of Approval
Application
Rem arks
Cert. N o.
D estec Engineering Ltd.,
Five Mile Lane,
Washingborough,
Lincoln, LN 4 1AF,
Desflex Flanged and
Sw ivel Connetors
1 to 16 inch nom inal bore.
AN SI B16.5: 1988 Ratings for 600, 900, 1500 and 2500 class for
m aterial group num ber 1.1, Materials
ASTM A182 Grad e F51 (Duplex UN S S31803)
ASTM A182 Grad e F53 (Super Duplex UN S S32750) and
Super Duplex UN S S32760
Design Cod es:
ASME VIII, Division 1, Append ix 2: 1992
ASME VIII, Division 2, Append ix 3: 1992
ASME B31.3: 1993, Clause 302.3.2
BS5500: 1995, Section 3.8
AN SI B16.5: 1988
API Specification 6FB-1992
Marine and ind ustrial piping
system s.
Blind flanges are not includ ed .
90/ 00048(E6)
Victaulic Company,
4901 Kesslersville Road,
Easton,
Pennsylvania, 18040-6714,
(USA).
Vic Press system
P507, P508, P560,
P562, P568, P571,
P572, P573, P574,
P575, P576, P577,
P578, P579, P585
The Vic Press Vic-Press® will be approved for Class III systems in
accordance with Table 12.2.7, Part 5, and Chapter 12 of the Ship
Rules- Compression couplings- Press - Fire resistant type
Refer to Certficate N o.
13/ 60014 for allow able
13/ 60014
Size ½ “to 2” Sch.10S type 316 Stainless Steel
Seal HNBR and EDPM
MAWP 16 bar (232 psi)
Maximum Temp 98o C (HNBR), 121o C (EPDM
502
Product: Flare Flanges (Part 1A)
GS-Hydro Oy,
Lautatarhankatu 4,
FIN 13110,
Hämeenlinna,
Finland.
Type
37° Flare Flange
System
Details of Approval
Pipe couplings utilising 37° flared tubes with cones and ‘O’ rings,
fastened with through bolts.
Application
ind ustrial piping system s.
Pipe d iam eter (inch):
½ to 12
Max. pressure (bar):
420
(Refer to GS-H yd ro technical brochure for actual m ax. pressure
for specified d iam eter)
Pipe m aterial:
Carbon Steel
Stainless steel
Seal Material:
Viton rubber
N BR rubber
90° Flare Flange
System
Pipe couplings utilising 90° flared tubes with loose flanges.
MD-FF3,
MD-FF5,
MD-FF6
Cert. N o.
11/ 00044
Approval
½ to 16
Max. pressure (bar):
16
(Refer to GS_H yd ro technical brocure for m ax. pressure for
specified d iam eter)
Pipe m aterial:
Carbon Steel
Stainless steel
CuN i
Marinetec D evelopment
(Shanghai) Ltd,
N o. 18B Chuansha Economic
Park,
N o. 6999 Chuansha Road,
Pudong N ew Area,
Shanghai, 201202,
Rem arks
11/ 00045
Approval
Flare flange pipe couplings, utilising flared tubes with cones and
‘O’ rings. Fastened with through bolts.
½ to 5
Max.pressure rating (bar):
420
(Refer to m anufaturer’s literature for actual pressure rating for
specific pipe d iam eter and m aterial)
Material:
Carbon Steel
Stainless steel
Refer ro certificate for
Cond itions of Approval
12/ 00009
503
Marinetec D evelopment
(Shanghai) Ltd ...continued
Tube-Mac Industries Ltd,
853 Avrin AVenue,
Stoney Creek,
Ontario, L8E 5N 8,
Canada.
Type
MD-F/ -**L(S).
Details of Approval
Application
Form ing joint pipe com pression coupling using rubber sealing
joint:
Type L
Type S
Pipe d iam eter (m m ):
8 to 42
8 to 38
Max. pressure rating (bar):
250 to 500
420 to 800
(Refer to m anufacturer’s literature for actual pressure rating for
specific pipe d iam eters and m aterials)
Material:
Carbon Steel
Stainless steel
MD-RF3;
MD-RF4;
M-RF6;
MD- RF8.
Retain ring pie couplings,utilising retaning ring and ‘O’ ring seals,
fened with through bolts.
½ to 8
Max. pressure rating (bar):
420
(Refer to m anufacturer’s literature for actual pressure rating for
specif pipe d iam eters and m aterials).
Material:
Carbon Steel
Stainless steel
FFC34
FFC64
FFC74
4 bolt loose slip -on flared flanges:
system s in accord ance w ith
the lim itations and cond itions
listed in Lloyd 's Register
Design Appraisal Docum ent
no. ETG O-988
Diam eter (DN ):
FFC34
13 to 76
FFC64
13 to 51
FFC74
64 and 76
350 to 140
420
310 to 270
-20 to +120
Rem arks
Cert. N o.
12/ 00010
12/ 00011
08/ 60011(E2)
504
Type
RFC34
RFC64
RFC74
RFAC48
Details of Approval
Application
4 and 8 bolt loose slip -on retain ring flanges:
RFC34
RFC64
RFC74
RFAC48
Diam eter (DN ):
13 to 76
13 to 51
64 to 100
127 to 203
350 to 140
420
400
275 to 240
system s in accord ance w ith
the lim itations and cond itions
listed in Lloyd 's Register
Design Appraisal Docum ent
no. ETG O-997
Rem arks
Cert. N o.
08/ 60012(E2)
-20 to +120
505
VOSS Fluid GmbH,
Lüdenscheider Straße 52-54,
51688 Wipperfürth,
Germany.
Type
VOSS ZAKO Flange
Couplings
Details of Approval
Application
ZAKO-flange coupling system consists of:
-ZAKO-flange, -ZAKO-ring (w ith O-ring groove),
O-ring and -4 cylind er screw s DIN 912-10.9
Sealing on the pipe sid e by high specific surface pressure
betw een the ZAKO-ring and the internal surface of the pipe.
Sealing on the flange sid e by an O-ring.
General use in m arine, offshore and ind ustrial piping
system s.
Series
Restrictions:
1. starting/ control air and
CO2 systems.
2. inside machinery spaces of
category A or accommodation
spaces for inert gas main lines
3. fire extinguishing systems
which are not always filled
with water
Flange
type
N orm al SAE
H igh
press.
SAE
H igh
press.
Square
Flange
size
Pipe
outsid e
(m m )
1/ 2 to 3” 16 to 18
N om .
pressure
(bar)
250
1/ 2 to 2” 16 to 65 * 400
DN 11
to DN 49
Rem arks
See Certificate for other cond itions
Cert. N o.
93/ 20052(E4)
16 to 65 * 400
*) only up to OD 60,3 m m if intend ed for Class I and II – piping
system s
506
Product: Flexible Pipe Couplings and Hoses
(Part 1A)
Alfons Market & Co GmbH,
Gadelander Str.135,
D -24539 N eumunster,
Germany.
Type
marsoflex® HFH
Details of Approval
Flame resistant hose, consisting of inner PTFE hose, two layers of
stainless steel wire braids and two outer layers of heat protection
hoses, all compressed into fittings.
Ratings
Sizes
: DN 16 / DN 20 / DN 25
Design Pressure
: PN 80
Design Temperature
: 180°C
marsoflex® MDO
Flame resistant PTFE hose assemblies with fire proof sleeves.
Hose: Helically convoluted PTFE inner tube, one stainless steel
wire braid reinforcement, covering with a fire sleeve
Sleeve: Woven fibreglass fibre coated with a covering of iron oxide
red silicone rubber
AP. PAFITIS & SIA O.E.,
Vlachakou 21 & Sfaktirias 1
STR,
Piraeus, 18545,
Greece.
CO2 hose assembly
Application
Cert. N o.
As flexible element between
rigid oil fuel pipe and diesel
engine on ships and offshore
Lloyd’s Register.
03/ 20023(E2)
For fuel-, lubrication- and
hydraulic oil, fresh- and
seawater piping systems in
marine and offshore fields,
Register.
06/ 20010(E1)
14/ 20084
Ratings:
Sizes
: DN 32 / DN 38 / DN 50
MAWP : PN 16 bar dynamical
Temperature range: -50°C to +150°C
Restrictions:
These hose assemblies are not
to be used for applications
where they are frequently
flexed in service.
Flexible rubber hose assem bly, consisting of inner tube of nitrile
rubber, one layer of high tensile steel w ire braid , and an outer
prickled cover of oil and w eather resistant chloroprene w ith
LARGA steel couplings.
For the use in CO2 fire
extinguishing system s, in the
m arine environm ent as
flexible connection betw een
CO2 bottle valve and
m anifold .
Ratings:
m axim um w orking pressure: up to 250 bar (d epend ing on hose
size)
Rem arks
507
(Part 1A)
Type
Details of Approval
Application
Rem arks
Cert. N o.
Tem perature Range: -40 to 70°C
Sizes: 3/ 16”, 1/ 4”, 5/ 16”, 3/ 8”, 1/ 2” and 3/ 4” in d ifferent
lengths and thread s
508
(Part 1A)
D unlop Oil & Marine Ltd,
Jubilee Industrial Estate,
Ashington,
N orthumberland, N E63 8UB,
Type
Fireshield
Details of Approval
Fire safe flexible hose assembly, made up of a black rubber inner
tube, 4 layers of multi spiral steel wire cords, and a flame retardant
rubber outer cover over layers of heat resistant fibre, with
permanently fitted end fittings:
Nominal diameter (inch):
Eaton Fluid Pow er GmbH,
D r.-Reckew eg-Straße 1,
76532 Baden-Baden,
Germany.
Application
12/ 00042
10/ 20050
1
165
–40 to +100
High pressure flexible hoses, consisting of synthetic NBR rubber
tube, 2-wire braid reinforcement for types GH793 and GH781 and
1-wire braid reinforcement for type GH663, Vinyl Nitril cover AVD
500 with global skive, TTC or screwed fittings.
fields, used as short joining
lengths in high pressure
hydraulic systems with
petroleum and water glycol
base fluids, fuel and lubricating
oils, air* and water.
GH 781, global-skive
or global-TTC fittings
Ratings:
Restrictions:
GH 793-4 to –32,
Nominal Pressure: 400 bar to 90 bar
to be use for applications with
movement between connection
ends.
GH 781-6 to –16, global skive fittings,
NP: 345 bar to 175 bar
Cert. N o.
As short joining lengths of
flexible hose, to accommodate
machinery and fixed piping
systems.
GH 793, global-skive,
global-TTC or
screwed fittings
GH 663, global-skive
or global-TTC fittings
Rem arks
GH 781-4 to –32, global –TTC fittings,
NP: 400 bar to 90 bar
GH 663-3 to -32, NP: 250 bar to 40 bar
Temperature Range:
-40 °C to +100 °C, Air*: max +70 °C
509
(Part 1A)
Type
SH 681
Details of Approval
Fire resistant, high pressure flexible hose consisting of synthetic
N BR rubber tube, single-w ire braid reinforcem ent, synthetic CR
rubber cover w ith TTC- and global skive fittings.
SH 681 -4 to -16,
DIN 6
8
10
12
16
20
25 (m m )
PN
225
215
180
160
130
105
88 (bar)
Tem perature Range: -40°C to + 100°C, for air*: + 70°C m ax.
Application
In a m arine and offshore
environm ent, used as short
joining length for hyd raulic
system s w ith petroleum and
w ater glycole based fluid s,
fuel and lubrication oils, air*
and w ater.
Rem arks
Cert. N o.
96/ 20066(E3)
.
510
(Part 1A)
Type
Details of Approval
Application
Rem arks
Restrictions:
For applications w here hoses
are frequently flexed in
service
Eaton Fluid Pow er GmbH
...continued
GH 506
H igh pressure flexible hose, consisting of synthetic N BR rubber
tube, w ith 4-w ire spiral reinforcem ents and synth. CR rubber
cover. Crim p fittings.
Ratings:
GH 506-12 to –32
N om . Press.:
420 bar to 250 bar
ind ustrial field s, used as short
joining lengths in high
pressure hyd raulic system s
w ith petroleum and
w aterglycol based fluid s,
lubricating oils and w ater
Cert. N o.
96/ 20066(E3)
97/ 20024(E3)
97/ 20025(E3)
Restrictions:
For applications where hoses
are frequently flexed in service.
2781, global-skive or
screw ed fittings
tube, w ith 2-w ire braid reinforcem ents and synth. CR rubber
cover w ith global skive fittings.
Ratings:
2781-4 to –32,
N om . Press. 400 bar to 90 bar
Tem perature Range: -40 °C to +100°C,
Air* -m ax +70 °C
joining lengths in high
pressure hyd raulic system s
w ith petroleum and
w aterglycol based fluid s, fuel
and lubricating oils, air* and
w ater
Restrictions:
are frequently flexed in service
511
(Part 1A)
Type
2681
Details of Approval
tube, 1-w ire braid reinforcem ent, synth. CR rubber cover w ith
global skive fittings
Ratings:
2681-3 to –32,
N om . Press.:
250 bar to 40 bar
Tem perature Range: -40°C to +100°C,
for air*= +70°C m ax.
Application
joining lengths for hyd raulic
system s w ith petroleum and
w ater glycol based fluid s, for
fuel and lubricating oils, air*
and w ater.
Rem arks
Cert. N o.
97/ 20027(E3)
Restrictions:
512
(Part 1A)
Eaton Fluid Pow er GmbH
...continued
Type
2807 w ith fire sleeve
624
Details of Approval
Med ium pressure flexible hose, consisting of extrud ed Teflon
tube w ith a single layer of stainless steel w ire braid
reinforcem ent w ith crim p or bolt-together reusable fittings.
Ratings:
2807-03 to –20
N om . Press.:
207 bar to 43 bar, Steam *= 14 bar m ax.
Tem perature Range: -73°C to +232°C, Steam *= +198°C m ax.
Application
lengths steam*, compressor
discharge and virtually all
chemical applications.
Rem arks
Cert. N o.
97/ 20028(E3)
03/ 20068(E2)
04/ 20008(E2)
Restrictions:
Not recommended for steam cold water cycling applications.
Eaton Germany GmbH,
D r.-Reckew eg-Straße 1,
76532 Baden-Baden,
Germany.
FC 234
Fire resistant flexible hose, consisting of elastomer inner tube, brass
plated steel wire reinforcement, braided refractory insulation, blue
elastomer cover with crimp or reuseable fittings.
Ratings:
Sizes:
05 to 16
Nom. Press.:
103 bar to 28 bar
Temperature Range : -40°C to +150°C
systems containing flammable
liquids and water in ships and
offshore installations classed or
this society.
Restrictions:
2807 w ith crim p
Fire resistant, m ed ium pressure flexible hose, consisting of
extrud ed Teflon tube w ith a single layer of stainless steel w ire
braid reinforcem ent w ith crim p fittings.
Ratings:
2807-03 to –20
N om . Press.:
207 bar to 43 bar, Steam *= 14 bar m ax.
Tem perature Range: -73°C to +232°C, Steam *= +198°C m ax.
In marine, offshore and
industrial fields, used as short
joining lengths for
steam*, compressor discharge
and virtually all chemical
applications.
513
(Part 1A)
Type
Details of Approval
Application
Rem arks
Restrictions:
service.
Not recommended for steam cold water cycling applications.
Eaton Germany GmbH
...continued
GH 200
2807 w ith Fire Sleeve
Type 624 optional
Fire resistant flexible hose, consisting of synthetic rubber inner
tube, 4 wire spiral reinforcement and synthetic rubber cover with
crimp fittings.
lengths in high pressure
hydraulic systems with
petroleum based fluids.
Ratings:
Restrictions:
GH 200-12 and GH200-16, (DN 19 and DN 25)
Nominal Pressure: 420 bar
Temperature Range: -40 °C to +100 °C
to be use for applications with
movement between connection
ends.
H ose assem bly of an extrud ed PTFE tube covered w ith d ouble
stainless steel w ire braid plus a perm anent installed single layer
braid ed fibreglass fire resistant sleeve im pregnated and overlaid
w ith oil resistant silicone rubber
As short joining lengths in fuel, lubrication-, hydraulic oil,
ballast, fresh-and seawater
cooling and auxiliary steam
systems in ships and offshore
installation classed or
w ith this Society.
Ratings:
Hose Part No. 2808-8 to 2808-24
Sleeve Part No. 624-14 to 624-42
M.A.W.P. (bar) 190 to 55
Temp. Range - 73°C to + 230°C
Cert. N o.
04/ 20008(E2)
11/ 20043
94/ 20004(E4)
Restrictions:
For applications w here hoses
service.
514
(Part 1A)
Enviromental Gasket Company
Ltd.,
309# Hanzhongmen Street,
Gulou,
N anjing, 210036,
Type
Graphite spiralw ound gasket AIGI
35
Details of Approval
Diam eter (m m ):
14 – 4000
300
-250 – 870
Application
Flanged pipe joints in m arine,
offshore and ind ustrial piping
system s.
Rem arks
Cert. N o.
13/ 00088
515
(Part 1A)
Ltd. ...continued
Type
Details of Approval
PTFE spiral-w ound
gasket
AIGI 35
Diam eter (m m ):
14 – 4000
300
-200 – 260
Metal reinforced
flexible graphite
gasket: AIGI 39
Diam eter (m m ):
8 – 1500 (139A-G),
8 – 1000 (139H )
140
450 (oxid izing),
870 (non-oxid izing)
Flexible graphite
gasket: AIGI 38
Diam eter (m m ):
8 – 1500
140
450 (oxid izing),
870 (non-oxid izing)
PTFE gasket: AIGI 36
Diam eter (m m ):
5 – 1500
63
-200 – 260
Expand ed PTFE
gasket:
AIGI 184IM
Diam eter (m m ):
5 – 1500
210
-268 – 315
N on-asbestos fiber
com pressed gasket:
AIGI 300IM
Diam eter (m m ):
5 – 2000
110
240
N on-asbestos fiber
com pressed gasket:
AIGI 350IM
Diam eter (m m ):
5 – 2000
100
250
Enhanced m od ified
PTFE gasket: AIGI
126
Diam eter (m m ):
5 – 1500
63
-200 – 260
Application
Rem arks
Cert. N o.
13/ 00088
516
(Part 1A)
Type
Details of Approval
Ltd. ...continued
Rubber gasket:
AIGI 141 (N BR
gasket)/
AIGI 142 (FKM
gasket)/
AIGI 144 (CR
gasket)/
AIGI 146 (EPDM
gasket)/
AIGI 147 (MVQ
gasket)
Diam eter (m m ):
5 – 1500
Max. w orking pressure (bar): 17 (AIGI 141/ 144), 40 (AIGI 142),
20 (AIGI 146/ 147)
-50 – 120 (AIGI 141),
-20 – 200 (AIGI 142),
-40 – 120 (AIGI 144),
-50 – 150 (AIGI 146),
-55 – 230 (AIGI 147)
Fr. Lürssen Werft GmbH & Co.
KG,
Zum Alten Speicher 11,
28759 Bremen,
Germany.
301 SN and 421 SN
Flexible hoses made up of an oil resistant seamless synthetic rubber
lining, one high tensile steel wire braid and a cover of black
synthetic rubber resistant to abrasion, oils, ozone and weathering
Ratings:
Type
Nominal Diameter, mm
Working Pressure, bar
GE Oil & Gas do Brasil
Limitada,
Praça Alcides Pereira N o 1 Parte - CEP,
24050-350 Ilha da Conceiçâo,
N iteroi,
Brazil.
WELLSTREAM
301 SN
5 to 51
80 to 415
421 SN
5 to 51
26 to 250
Unbond ed flexible pip e w ith end fittings fabricated by
com bining together a num ber of layers of either helically w ound
steel strip or continuously m ould ed plastic.
Max. d esign tem perature (°C):
Max. w ater d epth (m ):
Max. internal pressure (psi):
2 to 9.5
130
2500
10,205
Application
Rem arks
Cert. N o.
13/ 00088
permanent piping systems, for
essential and non-essential
services and locations as listed
in LR Rules and Regulations
for the classification of Ships,
Part 5, Chapter 12, Section 7
11/ 20021
ind ustrial piping system s for
oil, gas, petro-chem icals,
d rilling fluid s and w ater.
08/ 00035(E1)
Pipe d esigns to be prepared using the
program s PIPEMAKER, RBCFE,
RBSC and EN DFTG as review ed and
approved by LR.
517
(Part 1A)
GKN Stromag AG,
Hansastrasse 120,
59425 Unna,
Germany.
Type
PVN
PVP
Details of Approval
Highly flexible coupling with rubber elements of different shore
hardness with linear characteristic as per catalogue.
PVN
Size:
183 to 666
Nominal Torque, kNm : 0.16 to 20
Permiss. Speed, rpm : 5000 to 1500
PVP
433 to 666
5 to 40
2400 to 1500
Application
and non-essential
installations on board ships
and offshore installations
Register.
Rem arks
Cert. N o.
11/ 20019
For m ain propulsion in single-engine
d rives a “get-you-hom e” d evice has
to be provid ed .
518
(Part 1A)
HAN SA-FLEX AG,
Zum Panrepel 44,
28037 Bremen,
Germany.
Type
HD 106 – HD 150,
( EN 853, 1 SN );
Details of Approval
Oil and fire resistant flexible synthetic rubber hoses. End fittings
from carbon steel according to EN 10277-3 and stainless steel AISI
316 Ti / 316 L
HD 206 – HD 250,
( EN 853, 2 SN );
Ratings:
HD206 RM- HD250
RM, ( EN 853, 2 SN );
HD 410 – HD 425,
( EN 856, 4SP );
HD720 PRO – HD740
PRO, ( SAE 100, R 15
)
KP 106 – KP 125,
( EN 857, 1 SC );
KP 206 – KP 225,
( EN 857, 2 SC )
HD 100:
Nom. Diameter [mm]: 06 to 51
Nom. Pressure [bar]: 225 to 80
Temperature [°C]:
-40 to +100
Application
Fuel oil, lubrication oil and
hydraulic oil systems, ballast
systems, fresh- and sea cooling
water systems on ships classed
or intended for Classification
with Lloyd’s Register.
Rem arks
Cert. N o.
07/ 20045(E3)
Restrictions: For applications
where hoses are frequently
flexed in service.
HD 200 and HD 200 RM:
Temperature [°C]:
-40 to +100
HD 400:
Temperature [°C]:
-40 to +100
HD 700 PRO:
Nom. Pressure [bar]: 420
Temperature [°C]:
-40 to +121
KP 100:
Temperature [°C]:
-40 to +100
KP 200:
Temperature [°C]:
-40 to +100
519
(Part 1A)
HAN SA-FLEX AG,
D ivision Metalhoses,
Zum Gew erbepark 4,
37691 Boffzen,
Germany.
Type
TFW
Details of Approval
Wet fire tested, multi-layer braided and corrugated PTFE hose,
reinforced with a wear resistant fibreglass coating (hose type
TFW) with different hose fittings, pressed with crimping ferrules.
Application
Rem arks
Cert. N o.
Fuel oil and lubrication oil
system s, ballast, fresh - and sea
cooling w ater system s,
auxiliary steam and non
essential system s on ships
Register.
08/ 20023(E1)
Fuel oil system at internal com bustion engines on ships
Register.
09/ 20033(E1)
Could be accepted in fluid
system s includ ing oil or fuel
oil on ships classed or
w ith LR, provid ed that they
are installed to the satisfaction
of the Society’s surveyors.
10/ 00027(E1)
TFW:
Nom. Pressure [bar]: 125 to 20*
Temperature [°C]:
-55 to +205*
* For permanent high temperature operation the working pressure
has to be reduced by factor 0.85 at 170°C, 0.75 at 180°C
and 0.5 at 205°C
HKS GmbH,
Schonenfahrerstraße 1,
18057 Rostock,
Germany.
S0__/ 016/ BDN__/ B-DN__-800
Single layer, corrugated PTFE hose with wire braid reinforcement
and outside fire sleeve of glass-fibre tubing, impregnated and
overlaid with special oil-resistant silicon rubber. End fittings are
sleeve pressed, neck welded loose flanges.
Sizes: DN 32, 50 and 65
Working pressure: 8 bar
Design temperature: -40° C up to + 180° C
IN TERTRACO (Italia) S.p.A.,
Via E. Amaldi, 1/A-B,
I-46029 Suzzara,
Mantova,
Italy.
FlexIT Series: 1T, 2T,
3T, SK117, SK216,
H 4, R5, SH P, 3000,
5000, 6000
H yd raulic H ose and Coupling System
3
Size Range:
/ 16” to 3”, DN 5 to 76
Working Pressure : 24 bar to 500 bar as d etailed in d ata sheets
520
(Part 1A)
Type
Coupling Series:
(one piece) K, J, H , R,
X, XLZ series
Details of Approval
Fire tested to:
Application
Rem arks
Cert. N o.
SOLAS 74 as am end ed Reg II-2/ 15.2.8, II22/ 18.2.2 Regulation X3 – IMO Res
MSC.36(63) 7.5.4 (H SC Cod e) –Regulation II2/ 4.2.2.5.6, Regulation X3.
ISO 15540 (1999); ISO 15541 (1999)
521
(Part 1A)
Type
IN TERTRACO (Italia) S.p.A.
...continued
Coupling Series:
(tw o piece)
B+SCX0T, B+SN 03T,
B+S312T, B+S0420,
I+S004I, I+S006I,
Z+SZ06I series
ISOTUBI, S.L.,
Pol. Ind. Santa RitaC/Mecànica, 6,
08755 Castelllbisbal,
Barcelona,
Spain.
N UMEPRESS
Stainless steel pipe
system w ith
couplings
Details of Approval
Application
Rem arks
Cert. N o.
10/ 00027(E1)
Stainless steel w eld ed pipes to EN 10312 and EN 10217-7.
Press fittings w ith ‘O’ ring seal.
Outsid e d iam eter (m m ):
Max. w all thickness (m m ):
Max. pressure (bar): 16
13.5 to 108
2
0 to 120
May be used in Class III
system s w here no fire
end urance test is required and
in d om estic and sanitary
system s up to 16 bar and
108m m o/ d .
Marine use for ship -to-shore
or ship -to-ship cargo transfer
connections
13/ 00017
use.
Pressfitting w ith ‘O’ ring seal. (Refer to m anufacturers catalogue
for types of Pressfitting)
Meiji Rubber & Chemical Co
Ltd,
970-11 Yaga,
Yamakita-machi,
Ashigarakami-gun,
Kanagaw a Pref., 258-0115,
Japan.
A-0940
B-0940
Cargo hose for liquefied gas carriers
Construction : Polyam id o fabric base com posite hose reinforced
w ith internal and external w ire spirals of stainless steel
06/ 10001(E2)
522
(Part 1A)
Type
Details of Approval
Ratings : A-0940
N om inal
Max. Working
Dia.
Pressure
(Inch.)
(MPa)
1½
2.0
2
2.0
3
2.0
4
2.0
6
2.0
8
1.0
10
1.0
Tem perature
Range
(°C)
-50 to +65
-50 to +65
-50 to +65
-50 to +65
-50 to +65
-50 to +65
-50 to +65
Application
Rem arks
Cert. N o.
Min. Bend ing
Rad ius
(m m )
120
170
200
400
650
910
1200
523
(Part 1A)
Type
Details of Approval
Ratings : B-0940
N om inal
Max. Working
Dia.
Pressure
(Inch.)
(MPa)
1½
2.0
2
2.0
3
2.0
4
2.0
6
2.0
8
1.0
10
1.0
Meiji Rubber & Chemical Co
Ltd ...continued
Mirab Co.,
Ashery Street,
10th KM, Karadje Makhsoos
Road,
P.O. Box 13445-487,
Tehran,
Iran.
MIRAB
Oldham Seals Ltd.,
Jetpack Works,
Gravel Lane,
Quarry Lane Industrial Estate,
Chichester,
West Sussex, PO19 2PG,
Jetpac Firepac
bellow s, single or
bolted in tand em
Application
Rem arks
Cert. N o.
06/ 10001(E2)
Tem perature
Range
(°C)
-20 to +65
-20 to +65
-20 to +65
-20 to +65
-20 to +65
-20 to +65
-20 to +65
Min. Bend ing
Rad ius
(m m )
120
170
200
400
650
910
1200
Dism antling Joints
Drinking, raw and sew age
w ater system s
N om inal d iam eter DN (m m )
100 - 1600
Design pressure PN (bar)
< 25
Jetpac Fire Resistant, reinforced , rubber bellow s w ith integral
m etal rotary flange in single, or bolted in tand em .
Fire tested in accord ance w ith DEF STAN 02/ 345
05/ 00094(E1)
73919d j
Use as a general purpose
expansion bellow s in piping
system s in N aval ships.
12/ 00074(E2)
N om inal bore (inches): 2, 3, 4, 5, 6, 8, 10, 12, 14.
See m anufacturer’s d ata for pressure ratings.
Licence L93/00042
524
(Part 1A)
Type
Jetpac Fitted Air Hose
Details of Approval
Jetpac 1 ½” x 1285m m nom inal bore air hose w ith m etal sw ivel
flanges to BS EN 1092-1 PN 40
Jetpac 3/ 8”N .B. x 795m m Fitted Air H ose assem blies w ith
Sw agelok stand pipes.
Ratings:
1 ½” x 1285mm Fitted Air Hose
3/ 8” x 795mm Fitted Air Hose
Design Pressure 33 Bar
Design Temperature 50°C
Application
Use as a general purpose air
hose in piping system s in
N aval ships w here a fire
resistant hose is not required .
Rem arks
Cert. N o.
12/ 00075(E2)
525
(Part 1A)
Oldham Seals Ltd. ...continued
Type
Jetpac Fire Resistant
fitted hose.
Details of Approval
Jetpac Fire Resistant fitted hose, straight or preformed with
permanently attached metal end fittings.
Ratings:
3/ 8” to 1 ½”
flange hose
Application
Ratings:
3/ 8” to 1 ½”
4”
5” to 6”
Use as a general purpose hose
in piping systems in Naval
ships.
Use as a general purpose hose
in piping system s in N aval
ships.
16 bar
Jetpac Fire Resistant flange hose, straight or preformed with
integral metal Rotary Flanges.
Rem arks
10 bar
6 bar
12.4 bar
12/ 00077(E2)
Jetpac Fire Resistant Preformed fitted hose with CODE 62 flanges.
Ratings:
2”n.b. x 1415m m . Design pressure 414 bar.
Fire tested to Defence Stand ard 02/ 345.
Use as a hose in piping systems
in Naval ships where fire
testing to def.stan.02/ 345 is
required.
Jetpac Firepac
bellow s.
Single or tand em
Fire resistant, reinforced , rubber bellow s w ith either integral
rubber bond ed flanges w ith m etal backing rings, or m etal rotary
flanges.
ind ustrial use as a general
purpose expansion bellow s in
piping system s.
Maxim um w orking
pressure (bar)
Single
15
15
15
15
15
15
12/ 00076(E2)
high pressure fitted
hose.
N om inal
bore
(inch)
1¼
1½
2
2½
3
4
Cert. N o.
15/ 00014(E1)
93/ 00145(E5)
Maxim um w orking
pressure (bar)
Tand em
10
10
10
10
10
10
526
(Part 1A)
Type
Details of Approval
5
6
7
8
10
12
15
10
10
10
5.5
5.5
Application
Rem arks
Cert. N o.
10
10
5.5
5.5
527
(Part 1A)
Oldham Seals Ltd. ...continued
Type
Jetpac
Fire resistant hose,
straight or
preform ed .
Details of Approval
Fire resistant, reinforced , rubber hoses straight or preform ed
w ith either integral rubber bond ed flanges and m etal backing
rings, or m etal rotary flanges.
N om inal bore
(inch)
½
¾
7
/8
1
1½
2
2½
3
4
5
6
7
Ltd,
215, Yoosan-D ong,
Yangsan,
Gyeongnam, 626-230,
Korea, Republic of.
421 & 481
Application
Rem arks
Cert. N o.
ind ustrial use as a general
purpose hose for short joining
lengths in piping system s.
93/ 00146(E5)
oils.
11/ 10102
Maxim um w orking
pressure (bar)
10
10
10
10
10
10
10
10
10
10
10
5
Synthetic rubber flexible hoses reinforced with 1 braid steel wire
with permanently fitted couplings
Designation:
421 with coupling ‘43 & 48 Series Fittings’
Ratings
Sizes: 1/ 4”(6.4m m ) to 2”(50.8m m )
421: -40°C to +125°C
481: -40°C to +100°C
528
(Part 1A)
Type
301 & 381
Details of Approval
Synthetic rubber flexible hoses reinforced with 2 braid steel wire
with permanently fitted couplings
Designation:
Application
oils.
Rem arks
Cert. N o.
11/ 10103
529
(Part 1A)
Type
Parker Hannifin
Manufacturing Srl,
Via GB Pirelli 6,
22070 Veniano (Co),
Italy.
Application
Rem arks
Ratings
Sizes: 1/ 4”(6.4m m ) to 2”(50.8m m )
301: -40°C to +125°C
381: -40°C to +100°C
Ltd ...continued
30240 Lakeland Boulevard,
Wickliffe,
Ohio, 44092,
(USA).
Details of Approval
787TC
797TC
Parkrim p 77 series
fittings
Fire tested flexible hoses m ad e up of synthetic rubber core, four
layers of steel w ire reinforcem ent and an outer synthetic rubber
cover, w ith perm anent end fittings:
Maxim um operating pressure (psi):
787TC
797TC
Maxim um tem perature ranges (°C):
Gasoline fuel, d iesel oil fuel,
petroleum based hyd raulic fluid s and
lubricating oils:
Fresh / sea w ater, w ater / glycol
m ixtures and w ater / oil em ulsion
hyd raulic fluid s:
Polyol ester fluid s
H31 BOP size 8-12
H29 BOP size 16-20
R35 BOP size 24-32
½ to 2
5000
6000
Cert. N o.
11/ 10103
perm anent piping system s,
containing petroleum based
hyd raulic fluid s and
lubricating oils, Polyol ester
fluid s,
w ater, w ater/ oil
em ulsion and w ater/ glycol
hyd raulic fluid s
For lim itations of use see Design
Appraisal Docum ent
11/ 60068(E1)
For oilfield Blow out Preventer
hyd raulic control lines
14/ 20016
-40 to 125
+85
+65
Fire and oil resistant synthetic rubber four or six w ire spiral
reinforced flexible hyd raulic hoses, w ith glass fibre sleeve for fire
protection, outer steel corrugated sleeve for m echanical shock
protection, connected w ith Parker proprietary crim p fittings.
Ratings:
530
(Part 1A)
Type
Details of Approval
Type
H 31 BOP-8
H 31 BOP-12
H 29 BOP-16
H 29 BOP-20
N om inal
d iam eter [m m ]
12
20
25
32
Application
Rem arks
Cert. N o.
Max.Working
Pressure[bar]
420
420
350
350
531
(Part 1A)
Type
Details of Approval
R35 BOP-24
R35 BOP-32
Parker Hannifin
Manufacturing Srl ...continued
40
50
Application
Rem arks
350
350
Cert. N o.
14/ 20016
Tem perature Range [°C] -40 to 100
PH Industrie Hydraulik GmbH
& Co. KG,
Stefansbecke 35-37,
D -45549 Spockhövel,
Germany.
Hoses:
1ST, 1SN, 2ST, 2SN
(DIN EN 853);
1SC, 2SC (DIN EN
857);
4SP, 4SH, R13 (DIN
EN 856);
R15 ( SAE 100 R15)
Hose assemblies consisting of oil- and fire resistant flexible
synthetic rubber hoses with one to six high tensile wire braids or
spirals and end fittings from stainless steel material 1.4571/ 1.4404
(AISI 316Ti/ 316L) or equivalent for skive and non- skive assembly.
End Fittings:
Ferrules and nipples
types according to PH
catalogue 2015.
Ratings:
.
DN (m m )
PN (bar)
Tractor/ 1
Tractor/ 1T
Rockmaster
6 to 51
6 to 51
6 to 51
225 to 40
225 to 40
400 to 90
Tem perature
(°C)
-40 to +100
-40 to +100
-40 to +100
Tractor/ 2T
Tractor/ 2K
Tractor/ 1K
Goldenspir/ 4SP
Goldenspir/ 4SH
Rockmaster/ R13
Rockmaster/ R15
6 to 76
6 to 25
6 to 25
6 to 51
19 to 51
19 to 51
19 to 38
400 to 45
400 to 165
225 to 88
485 to 175
420 to 250
350
420
-40 to +100
-40 to +100
-40 to +100
-40 to +100
-40 to +100
-40 to +121
-40 to +121
As hyd raulic hose assem blies
in ship, offshore and
ind ustrial installations classed
00/ 20058(E3)
Other Conditions:
The PH Ind ustrie-H yd raulic
high pressure hoses are to be
selected and installed
accord ing to the prod ucer’s
recom m end ations and
instructions. Assem bly of
hoses has to be carried out by
w ell trained personnel. The
valid ity of the Certificate
for subject hose assem blies is
based on a valid verification
for the intend ed hose types.
Restrictions:
These hose assem blies are not
to be used for applications
w ith m ovem ent betw een
connection end s.
532
(Part 1A)
A.S.,
Esenyurt Yolu 31 Avcilar,
POB 55 Post Code 34842,
Istanbul,
Turkey.
Type
SAE J 1527
R1 / R2 / R3
Details of Approval
Marine fuel hoses consisting of synthetic N BR rubber tube, w ith
or w ithout one steel w ire helix and synthetic CR ru bber cover,
w ith end fittings.
Diam eter (DN ):
6.35 to 76.00 (R1 & R2)
5.00 to 76.00 (R3)
4.5
-35 to +100
Application
fuel tanks and d eck fittings,
and m achinery and fixed
piping system s.
Rem arks
Cert. N o.
02/ 00030(E2)
approval.
533
(Part 1A)
Semperflex RIVALIT GmbH,
Steinhardter Str. 32a,
55596 Waldböckelheim,
Germany.
Type
2 SN, DN 12 outer
layer perforated or
not perforated,
straight or 90°-elbow
connections
Application
Inner and outer synthetic rubber hose with inner double wire braid
reinforcement with Rivalit end fittings according drawings.
The hose assembly may be
used in CO 2 fire extinguishing
systems in a marine
environment as flexible
connection between CO 2 bottle
valve and manifold.
01/ 20048(E2)
Short joining length of flexible
hose to accommodate relative
movements in Hydraulic Oil,
Fuel Oil, Lubricating Oil, Bilge
& Ballast System, Sanitary,
Fresh Water and Sea Water
Cooling, Glycol and Aqueous
Emulsion Oils piping systems.
02/ 00079(E3)
Short lengths of flexible hose to
movements in hydraulic oil,
lubricating oil, bilge and ballast
systems, sanitary, fresh water
and sea water cooling, glycol
and aqueous emulsion oil
piping systems
09/ 00003(E1)
MAWP
: 275 bar
Temp. Range: -40°C to 100°C ( short term up to * 120°C)
Rem arks
Cert. N o.
Details of Approval
Standard: DIN EN 853
Specma AB,
P.O. Box 164,
Götenburg, SE-401 22,
Sw eden.
Specma PowerTech
1SN, 2SC, 3W, 4SH &
280
Fire resistant non-metallic flexible hoses with permanent fitted
coupling.
Hose Type
SPT 1SN
SPT 2SC
SPT 3W
SPT 4SH
SPT 280
Specm a Pow erTech
R13
I.D
(mm)
4.8 to 50.8
6.5 to 25.0
10.0 to 25.0
19.0 to 38.1
6.4 to 31.8
Working
Press. (bar)
250 to 40
400 to 165
500 to 310
420 to 300
280
Fire resistant non-metallic hoses with permanent fitted coupling:
31.8, 38.1 & 50.8
345
534
(Part 1A)
Type
Specm a Pow erTech
2SN
Details of Approval
Fire resistant non-metallic hoses with permanent fitted coupling:
4.8 to 50.8
415 to 80
Application
piping systems
Rem arks
Cert. N o.
09/ 00004(E1)
535
(Part 1A)
Specma AB ...continued
Type
Specm a Pow erTech
R15
Application
Fire resistant non-metallic hoses with permanent fitted coupling,
comprising of an oil resistant synthetic rubber lining, four or six
spiral steel reinforcements, and an outer cover of weather resistant
rubber:
piping systems
09/ 00046(E1)
Axially non restraint pipe couplings for plain- ended pipes of all
materials.
T- profile insert to prevent creepage on the pipe, electrical
conductivity clips and couplings with “dot” designation for
installation without torque wrench on request.
For m arine, offshore and
ind ustrial piping system s, the
recom m end ations.
02/ 20014(E5)
Pipe OD (m m ) N om inal Pressure (bar)
1L, 1L1
2L
2LS
48.3-168.3
16
--180.0
-12.0
16.0
200.0
-11.0
15.0
219.1
-10.0
13.5
250.0
-9.0
12.0
267.0
-8.0
11.0
2LU
-16.0
16.0
16.0
16.0
16.0
2H
-------
273.0
304.0
323.9
355.6
406.4
457.2
508.0
16.0
16.0
16.0
16.0
15.0
5.0
5.0
16.0
16.0
16.0
16.0
16.0
---
Rules for the Classification of
Ships, Part5, Chapter12,
Section 2.12, or the Rules for
the Classification of Special
service Craft Part15, Chapter
tested , slip type,
slip on joints. Specific
restrictions for these couplings
are stated below . For other
system s not m entioned in the
Rules, not listed below or for
Offshore or Ind ustrial system s
then these w ill be consid ered
Working tem perature range (°C):
Straub Werke AG,
Straubstrasse 13,
CH-7323 Wangs,
Sw itzerland.
STRAUB- FLEX 1L /
2L / 2LS / 2LU / 2H
STRAUB- FLEX
1L.dot/ 2L.dot/ 2LS.d
ot/ 2LU.dot/ 2H.dot
--------
8.0
7.0
7.0
6.0
5.5
5.0
4.5
19. 25.4, 31.8 & 38.1
420
-40 to 121
11.0
10.0
9.5
8.5
7.5
5.0
5.0
Rem arks
Cert. N o.
Details of Approval
536
(Part 1A)
Straub Werke AG ...continued
Type
Details of Approval
Application
.Restrictions.
Rem arks
Cert. N o.
02/ 20014(E5)
locations :Class 1 piping, CO2, starting
Insid e m achinery spaces of
category A or accom m od ation
spaces for :Main lines of inert gas
system s.
Pipe system s for flam m able
liquid s includ ing
sound ing pipes.
b.
Bilge lines
c.
Cooling w ater and
ballast
system s
for pipes on w eather d ecks of
4
Scuppers and
d ischarge (overboard ). Deck
d rains, except for pipes above
the freeboard d eck.
537
(Part 1A)
Type
Details of Approval
Application
Rem arks
Cert. N o.
tanks and other spaces w hich
d ecks for inert gas m ain and
9. Fire m ains, w ater spray
and sprinkler system s.
538
(Part 1A)
Type
STRAUB-METALGRIP-FIRE-FENCE
Details of Approval
Pipe Couplings for plain end ed m etallic pipes
STRAUB-METAL-GRIP-FIRE-FEN CE
STRAUB-GRIP-LFIRE-FENCE
Pipe OD [m m ]
33.7 – 219.1
244.5
267.0 – 273.0
323.9
355.6 – 406.4
N om inal Pressures [bar]
16
14
12
10
8
Pipe Couplings for plain end ed m etallic pipes
STRAUB-METAL-GRIP-FIRE-FEN CE
Pipe OD [m m ]
33.7 – 219.1
244.5
267.0 – 273.0
323.9
355.6 – 406.4
16
14
12
10
8
Pipe OD [m m ]
26.9 – 139.7
154 – 168.3
219.1
244.5 - 254
267
273 + 304
323.9
355.6
406.4
16
13
10
5.5
5
4
3
2.5
2
Application
For m arine use in fire m ain,
w ater spray and sprinkler
system s or sim ilar that are not
alw ays filled w ith w ater,
subject to the acceptance of
the N ational Authority.
Rem arks
Cert. N o.
13/ 20022
N otes:
Couplings m ust not be used to
join pipes w ithin a
certain d istance (less than 450
m m ) from the
bulkhead through w hich the
fire m ain (or sim ilar)
has passed .
539
(Part 1A)
Type
Details of Approval
Application
Rem arks
Cert. N o.
Tem perature range for rubber sleeve m ad e of:
- N BR:
from - 20°C to +80°C
- EPDM:
from - 20°C to +100°C
- H N BR:
from - 20°C to +125°C
- FPM:
from - 20°C to +180°C
540
(Part 1A)
Type
Details of Approval
Application
Rem arks
STRAUB-METALGRIP
STRAUB-METALGRIP.dot
Wet fire tested Pipe couplings for d etachable sealing and
anchoring plain end ed m etallic pipes and couplings w ith “d ot”
d esignation for installation w ithout torque w rench on request.
recom m end ations.
STRAUB-METALGRIP-FIRE-FENCE
Pipe OD (m m )
N om inal Pressure (bar)
33.7 – 219.1
16.0 for m arine application
33.7 – 219.1
20.0 for offshore and
ind ustrial application
244.5
14.0
267.0 – 273.0
12.0
323.9
10.0
355.6 – 406.4
8.0
1, Section 5.8 for I.S.O.
19921/ 19922 w et fire tested ,
grip type, slip on joints.
For material combinations
for the corresponding
media the producer’s
recommendations and
instructions to be sought.
Tem perature Range: EPDM -20°C to +100°C
N BR -20°C to + 80°C
H N BR -20°C to +125°C
Viton -20°C to 180°C
listed below or for Offshore or
Ind ustrial system s then these
w ill be consid ered .
Marking of the products to show:
Producer’s name or trade
mark, type designation,
material combination, size,
gasket material, torque and
max. working pressure or
pressure Class.
Cert. N o.
94/ 20033(E10)
Other cond itions:
Suitable provision for
expansion is to be made
where necessary in each
range of pipes.
541
(Part 1A)
Type
Details of Approval
Application
Rem arks
Cert. N o.
Restrictions.
locations :1.
Class1piping, CO2,
system s.
2.
Insid e m achinery
spaces of category A or
accom m od ation spaces for :-
542
(Part 1A)
Type
Details of Approval
Application
Rem arks
a.
Main lines of inert
gas system s.
b.
Pipe system s for
sound ing pipes.
c.
Bilge lines
Cert. N o.
94/ 20033(E10)
3.
tankers.
4
Scuppers and
Fire m ain, w ater spray and
w ith w ater.
5
Pipelines in cargo
hold s, tanks and other
spaces w hich are not easily
accessible.
STRAUB-GRIP-L,
-L.d ot and
-GRIP-LU; -LU.d ot;
Axial restraint pipe couplings for d etachable sealing and
anchoring plain end ed m etallic pipes and couplings w ith ”d ot”
d esignation for installation w ithout torque w rench on request.
STRAUB-GRIP-LFLAMSTOP;
Pipe OD [m m ]
N om inal Pressure [bar]
L
LU
L-FLAMSTOP FIRE-FEN CE
recom m end ations.
94/ 20035(E10)
Other Conditions:
Suitable provision for expansion is to
be made where necessary in each range
of pipes.
543
(Part 1A)
Type
STRAUB-GRIP-LFIRE-FENCE
Details of Approval
26.9 – 139.7
154 – 168.3
219.1
244.5 – 254
267
273 + 304
323.9
355.6
406.4
16
13
10
-------
---5.5
5.0
4.0
3.0
2.5
2.0
from Ø 30.0: 16
13
10
-------
Application
16
13
10
5,5
5,0
4,0
3,0
2,5
2,0
the coupling are accep table in
1, Section 5.8 for I.S.O.
19921/ 19922 w et fire tested ,
grip type, slip on joints.
Rem arks
Cert. N o.
For material combinations for the
corresponding media the producer’s
recommendations and instructions to
be sought.
Marking of the products to show:
Producer’s name or trade mark, type
designation, material combination,
size, gasket material, torque and max.
working pressure or pressure Class.
544
(Part 1A)
Type
Details of Approval
Temperature range for rubber sleeve made of:
- NBR:
from - 20°C to +80°C
- EPDM:
from - 20°C to +100°C
- HNBR:
from - 20°C to +125°C
- FPM:
from - 20°C to +180°C
Application
listed below or for Offshore or
Ind ustrial system s then these
w ill be consid ered .
Rem arks
Cert. N o.
94/ 20035(E10)
Restrictions.
locations :1.
Class1piping, CO2,
system s.
2.
Insid e m achinery
spaces of category A or
accom m od ation spaces
for :a.
Main lines of inert
gas system s.
b.
Pipe system s for
sound ing pipes.
c.
Bilge lines
3.
tankers.
4
Scuppers and
545
(Part 1A)
Type
Details of Approval
Rem arks
5
Pipelines in cargo
hold s, tanks and other
spaces w hich are not easily
accessible.
6
Fire m ain, w ater
spray and sprinkler system s or
sim ilar w hich are not alw ays
filled w ith w ater.
Sw agelok Company,
29500 Solon Road,
Solon, Ohio 44139,
(USA).
Application
PB Series Rubber
Hoses with end
connectors
¼ to 1 inch ( 6 to 25 mm)
1. Hoses are not fire resistant
type.
Pressure – Tem perature ratings refer to Manufactures Catalogue
MS-01-180
2. Hoses are approved only for
non- essential service.
Cert. N o.
94/ 20035(E10)
11/ 60011
10/ 00030(E2)
2. The hoses are not to be used
in flammable systems and sea
water systems where failure
could result in flooding.
3. Use of flexible hoses is to be
lim ited to around one m eter in
length.
Taylor Kerr (Couplings) Ltd,
D israeli House,
12, Aylesbury End,
Old Beaconsfield,
Buckinghamshire, HP9 1LW,
Axilock
Pipe couplings for plain end ed m etallic pipes:
Axilock-S:
Axilock-FP:
57 to 170
38 to 222.3
For m arine use in fire m ain,
w ater spray and sprinkler
system s or sim ilar that are not
alw ays filled w ith w ater,
subject to the acceoptance of
the N ational Authority.
546
(Part 1A)
Type
Axilock
Details of Approval
Pipe couplings for plain end m etallic pipes
Types I, II & IV
O.D. (m m )
21.3 - 219.1
244.5 - 273.0
323.9
355.6 - 406.4
Max. Working Pressure (bar)
20.0
8.5
7.3
6.0
Application
Industrial piping systems.
Rem arks
Cert. N o.
91/ 00400(E12)
For approval conditions see
certificate 91/ 00400(E12).
547
(Part 1A)
Taylor Kerr (Couplings) Ltd
...continued
Type
Axilock Type V
21.3 - 219.1
244.5 - 273.0
323.9
355.6 - 406.4
20.0
12.5
10.5
8.2
Axilock-S
Types I, II & IV
38 - 139.7
141.3 - 170
16.0
13.0
Axilock-FP
Types I, II & IV
Trident Rubber Inc,
585 Plum Run Road,
Canonsburg,
PA 15317,
(USA).
Details of Approval
SAE J 1527
R1/ R2/ R3
21.3 – 219.1
273.0
323.9
406.4
Tubiflex SpA,
Strada Torino, 25,
10043 Orbassano (TO),
Italy.
FLEX-PROVACUUM 2
UN I - Coupling B.V,
Sint-Oedenrode, Kerkdijk,
Zuid 11 a,
N etherlands, The.
UN I-FLEX
Cert. N o.
16.0
8.75
7.5
6.0
6.35 to 76.003 (R1 & R2)
5.00 to 76.00 (R3)
4.5
-35 to +100
FLEX-PRO-VACUUM 2 Flexible Assem bly
Vacuum pressure rating (bar):
Rem arks
91/ 00400(E12)
or w ithout one steel w ire helix and synthetic CR rubber cover,
w ith end fittings.
Diam eter (DN ):
Application
piping system s.
approval
03/ 60003(E2)
Suitable for use in Class III in
sanitary system s only.
12/ 00055(E1)
w ith the m anufacturer’s
recom m end ations.
15/ 30001
40 and 50
–0.4 to –0.55
Axially non restrained pipe coupling for plain -end ed pipes of
Carbon steel, Stainless steel, Cu and CuN iFe m aterials.
T – profile insert to prevent creepage on the pipe and optional
electrical cond uctivity clips.
548
(Part 1A)
Type
Details of Approval
Version
Pipe OD (m m )
Application
N om inal
Pressure
(bar)
Rem arks
Cert. N o.
For For m arine piping
system s, the coupling are
acceptable in locations
specified in the follow ing
Rules:- Rules for the Classification
549
(Part 1A)
Type
Details of Approval
Application
UN I - Coupling B.V
...continued
UN I FLEX L Ø 20.5 – 172 m m PN 16;
L
21,3-168,3
16
UN I FLEX S Ø 20.5 – 172 m m PN 16;
S
21,3-168,3
16
UN I - Coupling B.V,
Sint-Oed enrod e, Kerkd ijk,
Zuid 11 a,
N etherland s, The.
of Ships, Part5, Chapter12, ,
- Rules for the Classification
of Special Service Craft
Part15, Chapter 1.
of Inland Waterw ays Ships
Part 5, Chapter 10.
For I..S.O. 19921/ 22 w et fire
tested non restrained , slip -on
joints.
Rem arks
Cert. N o.
15/ 30001
Restrictions:The couplings are not
locations :- Class 1 piping,
- CO2, starting and control air
system s.
UN I FLEX Ø 180.0 – 2032 m m PN 16;
SB
219,1
SC
273,0-323,9
SG
355,6-457,2
SG
508,0-711,2
16
16
16
10
- Insid e m achinery spaces of
category A or accom m od ation
spaces for :a) Main lines of inert
gas system s b) Pipe
system s for
includ ing correspond ing
vent and sound ing pipes.
c). Bilge lines d ). Cooling
w ater and ballast w ater
system s.
550
(Part 1A)
UN I - Coupling B.V
...continued
Type
Details of Approval
SG2
SG3
SG3
SG4
762,0-1117,6
1219,2-1422,4
1524,0
1625,6-2032,0
UN I FLEX Ø 180.0 – 2032 m m PN 10;
SA
219,1
SB
273,0-323,9
10
Application
10
6
2,5
2,5
10
-. Steam pipe system s,
-. Bilge lines in other
m achinery spaces or high
fire risk spaces.
- Scuppers and d ischarge
(overboard ) d eckd rains,
freeboard d eck.
Pipelines in cargo
accessible.
SC
SC
SC2
355,6-508,0
558,8-711,2
762,0-1016,0
10
6
6
-. In pum p room s and open
d ecks for inert gas m ain and
- Fire m ains, w ater spray and
sprinkler system s
- Piping system s w ith im pulse
pressure load other than
w ater ham m er
SC2
SC3
SC3
SC4
1117,6
1219,2
1422,4-1524,0
1625,6-1828,8
2,5
2,5
--*
--*
- Unstrainer slip on joints are
to be used only in cases w here
com pensation of lateral pipe
d erm ation is necessary. Usage
of these joints as the m ain
m eans of pipe connection is
not perm itted .
Rem arks
Cert. N o.
15/ 30001
551
(Part 1A)
Type
Details of Approval
Application
UN I FLEX Ø 180.0 – 2032 m m PN 6;
SA
SB
SB2
273,0-323,9
355,6-508,0
558,8-711,2
762,0-812,8
6
6
2,5
2,5
SB3
1219,2
--*
SB
Rem arks
Cert. N o.
In cargo lines on board of
IWW tankers for cargoes other
than d iesel, oil, fuel oil,
petroleum crud e oil,
petroleum d iselates,
lubricating oil and bilge w ater
*) Tobe used in open system s only i.e. und er atm ospheric
cond itions
552
(Part 1A)
Type
Details of Approval
Application
Rem arks
- EPDM: -30 ºC up to +125 ºC for version L and S
-20 ºC up to +80 ºC for all other v ersions
- N BR: -20 ºC up to +80 ºC for all versions
UN I - Coupling B.V
...continued
UN I-GRIP
15/ 30001
Axially restrained pipe coupling for plain -end ed pipes of Carbon
steel, Stainless steel, Cu and CuN iFe m aterials w ith optional
electrical cond uctivity clips.
w ith the m anufacturer’s
recom m end ations.
Version
follow ing Rules:-
Pipe OD (m m )
UN I GRIP L Ø 20.5 – 172 m m PN 16;
L
21,3-168,3
UN I GRIP S Ø 20.5 – 172 m m PN 16;
S
21,3-168,3
UN I GRIP Ø 180.0 – 609.6 m m PN 16;
SG
219,1-273,0*
323,9*-355,6*
406,4*-508,0
558,8-711,2
UN I GRIP LE Ø 64 – 172 m m PN 10;
LE
66,6-168,3
UN I GRIP SE Ø 64 – 172 m m PN 10;
SE
66,6-168,3
UN I GRIP Ø 180.0 – 406.4 PN 10;
SC
219,1-273,0*
323,9*-355,6*
406,4*
N om inal
Pressure
(bar)
16
16
16
10
6
2,5
10
10
10
6
2,5
Cert. N o.
15/ 30002
of Ships, Part5, Chapter12 Rules for the Classification
of Special Service Craft
Part15, Chapter 1. - Rules
for the Classification
of Inland Waterw ays Ships
Part 5, Chapter 10.
For I..S.O. 19921/ 22 w et fire
tested , grip type, slip -on
joints.
Restrictions:The couplings are not
locations :- Class 1 piping,
553
(Part 1A)
Type
Details of Approval
UN I GRIP Ø 180.0 – 355.6 PN 6;
SB
219,1-273,0*
6
323,9*-355,6*
2,5
*) For CuN iFe pipes w ith w all thickness of 4 m m or less
m axim um N P is 2,5 bar
Application
Rem arks
Cert. N o.
- CO2, starting and control air
system s.
- Insid e m achinery spaces of
category A or
accom m od ation spaces for :-
554
(Part 1A)
UN I - Coupling B.V
...continued
Type
Details of Approval
- EPDM: -30 ºC up to +125 ºC for version L and S
-20 ºC up to +80 ºC for version SG
-30 ºC up to +125 ºC for version LE and SE
-20 ºC up to +80 ºC for version SC and SB
- N BR: -20 ºC up to +80 ºC for all versions
Application
a) Main lines of inert
gas system s
b) Pipe system s for
includ ing correspond ing
vent and sound ing pipes.
c). Bilge lines
Rem arks
Cert. N o.
15/ 30002
-. Steam pipe system s,
tankers w ith d esign pressure
of 10 bar or less. -. Bilge lines
in other
m achinery spaces or high
fire risk spaces. - Scuppers
and d ischarge
(overboard ) d eckd rains,
freeboard d eck. - Pipelines
in cargo hold s,
accessible. -. Fire m ains,
w ater spray and
sprinkler system s. On board of IWW tankers in
cargo lines other than d iesel
oil, fuel oil, petroleum crud e
oil, petroleum d istillates,
lubricating oil and bilge
w ater.
555
(Part 1A)
Vetus N .V.,
Fokkerstraat 571,
3125 BD Schiedam,
N etherlands, The.
Type
SAE J 1527
R1 / R2 / R3
Details of Approval
or w ithout one steel w ire helix and synthetic CR rubber cover,
w ith end fittings.
Diam eter (DN ):
6.35 to 76.00 (R1 & R2)
5.00 to 76.00 (R3)
4.5
-35 to +100
Application
piping system s.
Rem arks
Cert. N o.
13/ 00040
approval.
556
(Part 1A)
Wellstream International Ltd,
Wellstream House,
Wincomblee Road,
Walker Riverside,
N ew castle-Upon-Tyne, N E6
3PF,
Type
WELLSTREAM
Details of Approval
Unbond ed flexible pipe w ith end fittings fabricated by
com bining together a num ber of layers of either helically w ound
steel strip or continuously m ould ed plastic.
Max. d esign tem perature (°C):
2 to 16
130
Application
ind ustrial piping system s for
oil, gas, petro-chem icals,
d rilling fluid s and w ater.
Rem arks
Cert. N o.
92/ 00147(E8)
Pipe d esigns to be prepared using the
program s PIPEMAKER, RBCFE,
RBSC and EN DFTG as review ed and
approved by LR.
Water d epth and internal pressure range are d efined in
Wellstream Docum ent N os 402E002T Rev 2 and 402E003T Rev 1
respectively.
557
Product: GRP Piping (Part 1A)
Future Pipe Industries B.V.,
J.C. Kellerlaan 3,
PO Box 255,
7770 AG Hardenberg,
N etherlands, The.
Type
Fibermar
Application
Fibermar epoxy pipe system in accordance with Future Pipe
Fibermar Pipe Systems Specification:
Maximum working pressure (bar):
Diameter (mm):
Wall thickness (mm):
Wavistrong
HLB CO., Ltd.,
272-12, D angw ol-ro,
Onsan-Eup,
Ulju-Gun,
Ulsan,
689-892,
Korea, Republic of.
Details of Approval
HGP-E16C
10
150 to 900
3.4 to 27.2
16
25 to 600
2.6 to 18.4
Piping systems in marine and
offshore applications, in
12.5.3 of the Lloyd’s Register’s
Classification of Ships where
an ‘L3’ or ‘0’ is indicated.
Wavistrong Epoxy Pipe System and fittings in accordance with:
Specification 01/ 01- Adhesive bonded joint
Specification 01/ 03- Rubber seal (lock) joint
Lamination joint
01/ 01: 25 to 600
01/ 03: 80 to 1,200
Maximum working pressure (bar):
DN <16”
32
16”< DN < 24” 25
24”< DN < 32” 20
32” < DN <48” 12.5
Piping systems in marine and
offshore applications, in
12.5.3 of the Lloyd’s Register’s
Rules and Regulations
Fibre reinforced therm osetting plastic pipes and fittings.
Piping system

Subject: Air Pipes Product - Class Direct

Transcription

Similar documents

Excerpt

“without fear” 2015 - matthew j. lloyd csc

Andrew Lloyd Webber In Concert

Lloyd`s in the US market

Week of March 15, 1950 Secretary of State Dean Acheson sets forth

Sources for offshore industry

Ham Traders Net - E