Stockroom`s Favourite

Transcription

Stockroom’s Favourite
All You
Is
Supply
otor
The M
“The Flatmaster”
Sands Awesome!
This solid heavy duty, steel constructed sander works the same as the unit you build yourself. The
top is secured to a steel frame and the drum moves up and down when adjusting. (see pg. 9).
“Roto Raspa”
a new way to shape wood,
plastics, etc.
(see pg. 19)
2
“Woodline Router Bits”
for our Canadian Customers
(see middle insert Pages A1 - A32)
US Customers visit www.woodline.com
Satisfaction Guaranteed
The “V”-Drum Sander
See
O
E VIDE
ONLIN RATIONS
NST
om
DEMO
upply.c
We have come to realize that sooner or later, every woodworker
becomes aware of their need for our V-Drum Sander. Whether it be
for surface sanding, edge sanding, stripping paint, restoration, or
whatever unique purpose they have in mind, this sander will do it!
Originally designed to be a poor man’s drum sander, this product
has changed the way woodworkers surface sand. It has been
featured on HGTV’s In The Workshop, and in several magazines
within Canada and the US. The word continues to spread
about this outstanding tool.
s
om
tockro
www.s
Antistatic Feature
See the dust being drawn down
into the box (Feature #3)
Unique Features
1. No clips needed for holding paper. VELCRO®
brand hook & loop is used for changing paper simply unroll one grit and roll on another.
2. Sandpaper used on the V-Drum is less costly
than the clothback paper used for commercial
units.
3. The drum is made from polycarbonate tubing
which runs cooler and eliminates static. With no
static on the drum, dust won’t stick to the paper.
Instead it drops down into the box, allowing for
easier dust collection.
4. Centrifugal force is a key element. Firstly it
lifts paper off the drum creating an air gap. The
air gap prevents the drum from creating heat,
which in turn helps paper to last longer. Secondly,
centrifugal force means it takes less power to run
the “V”-Drum as the drum is not forcing the paper
into the wood.
5. Klingspor brand stearate coated paper will sand
pine, paint and even nails without damaging to the
paper, an extra cost to the user.
6. On longer drums use two or three different grits
at once.
7. Depth of cut is changed by switching the grit of
sandpaper. If you want to cut more use a coarser
grit, cut less use a finer grit, etc.
Using the “V” Drum works kit and an MDF top, this heavy
duty, solid steel constructed sander works the same as
the unit you build yourself. As with the build yourself
models, the Flatmaster does not come with a motor. The
unit is specially designed for basic motor mount. The
heavy duty metal fences are sold with the Flatmaster or
sold separately. Each single Fence comes with a pair of
Feather Wheels (pg. 9). These fences are bent within a
1° tolerance. They are not a perfect 90°. If a perfect 90°
is required, the fence may be shimmed on the inside or
outside depending on the angle.
Centrifugal force
Centrifugal Force is the key element for
making this sander such an impressive machine!!
Take time to set it up before you start using it.
Initially, the drum must be set below the table. Using
the finest grit of sandpaper on the drum and your
drum turned OFF, take a flat edged board and slide
it over the drum. The drum should be slightly below
the table. When tipping up your board, you should
be able to see light between the drum and the board.
This means that when you slide your board over
the drum the paper will not be touching (or ever so
slightly, but not enough to sand the wood or turn the
drum). When you turn the drum ON, the paper will
lift off due to centrifugal force and cause the paper to
sand. Once you have this set up, you DO NOT need
to change the height adjustment again. To adjust
the depth of cut, change from finer to coarser grits.
visit our website www.stockroomsupply.com
3
Frequently Asked Questions
1. Why am I getting chatter marks?
Usually this means your drum is set too high and the paper is being pinched between the drum and the wood. This causes
uncontrolled feed rates which in turn causes chatter marks. Page 7 explains how to set up your drum. The drum must initially
be set slightly below the table with your finest grit of sandpaper (usually a 220g). The theory is that with enough RPM (1750 rpm
on 4” diameter drums and 2200 rpm on 2” diameter drums) the paper will lift off the drum due to centrifugal force. The paper
will only lift off until the loop is engaged at the end of the hook -- .0018”. Because the paper is not touching the drum, the paper
is allowed to cut without creating heat (due to the air gap between the paper and drum – no friction – no heat). Consider the
paper floating around the outside of the drum providing a soft touch to your work with no pinching of the paper.
2. When building my own sander, what plan am I supposed to follow?
You can be as imaginative as you like and come up with your own version, but we say the EASIEST and most
STRAIGHTFORWARD plan to follow is the DVD version (which includes a Parts and Cut list). This plan also incorporates the Top that we sell (or shows you how
make your own). A DVD comes with each kit but may also be viewed online. Other creative plans are available on our website.
3. Which way should the drum be turning?
The drum should be set so that it is turning TOWARD the operator.
4. How do I adjust the depth of cut?
When you want to change the depth of cut of your sander, it’s as simple as changing the grit. If you want to cut more, put on a coarser grit. If you want to cut
less, put on a finer grit. The grits available range from 60-1500g.
5. The paper keeps flying off the drum...what should I do?
In order to prevent this from happening, we recommend that you cut the paper’s pointed tips off square. (If you see us at the show, this is what we do, although
once in a while the paper still comes off. We call this our disappearing paper trick!) If you do this and your paper still comes off, you may want to double check to
see that your drum is below the table. Another reason the paper could be coming off is simply because it is worn out. You can generally take each piece on and off
20-30 times. The paper has also been known to come off when the drum is running too fast. 18” drums should have a motor running at 1725 RPM (the balanced
drive system will cause the speed to increase to 2250 RPM). The 24” and 30” drums require a 1/2 HP motor running 1725 RPM. Under NO circumstances should
the 24” or 30” drums run any faster.
6. Why does the top of the drum sander have to be so thick?
There cannot be any flex in the top or your sander will not sand properly, so by making the top thick, it prevents this from happening.
7. What motor size do I need?
The air gap caused with this sander allows for the use of fractional hp motors. ¼ hp is required for the 2” diameter (18”) and a ½ hp is required for the 4” diameter
(24” & 30”) running at 1725 rpm. Under no circumstances should the 24” or 30” drums run any faster.
8. Does the hook and loop on the drum ever wear out?
It should never wear out, since it isn’t being crushed or heated up by wood being pushed into it, but in the event it does wear out, we warranty it and will
replace it for you.
9. When wrapping the sandpaper on the drum, does it matter if there is a gap in the sandpaper
where the drum shows through?
As long as the paper is rolled on evenly, it does not matter if there is a gap. When the drum spins fast, the gap is irrelevant.
10. Do I need a dust collector for my drum?
The V-drum Sander is made with a special anti-static polycarbonate tubing. This, in turn means that when you are sanding, most of the dust you are creating
just falls into the box below. The dust is not “charged” and therefore does not float in the air. Although there is a minimal amount of dust, we highly recommend
the use of a dust collector in some way, shape or form. What most people do is simply cut a hole in the side as a port for a vacuum or dust collection system.
We even have a woman who has purchased the drum, who keeps the V- drum Sander in her spare bedroom and hooks her vacuum cleaner up to it when she
sands. She loves it and uses it regularly!
11.Why does this drum sander sand from the bottom when most other drum sanders sand from
the top?
When the drum is on the top, you may find yourself sanding through the sawdust that you have already produced. No dust collector can remove all this sawdust.
Sooner or later, the sawdust will start loading and the sandpaper will work inefficiently. The sawdust created with the V-Drum sander (or Flatmaster) is drawn
downward so you are always sanding a cleaner piece of wood and finishing with a cleaner surface.
Another advantage to the drum being on the bottom is that the surface of the table can be used as a set up point. The sandpaper will only make contact with
what the flat surface will allow. The results are that you can sand a twist to match the flat surface. Also, sanding off a flat surface allows the user to sand past
the end of the drum, turn the piece around and sand the other side without leaving a large overlap mark.
12. Can I convert my existing drum sander to hook and loop?
Yes, you can, but be prepared that converting your drum sander over to the hook and loop fastening system is going to change
everything you have been taught about how to sand with your drum sander. All drum sanders are designed to pinch the
sandpaper between the drum and the wood in order to cut. This is what creates heat. Heat then breaks down the resins in the
wood, allowing the sandpaper to load up and burn the finish. Also, hook and loop conversion CANNOT withstand heat. It is
made from plastic and if it heats up, it will melt. When you have the hook and loop system on your drum, you need to change
the way you have your drum set up in order to prevent heat from building up. With the hook and loop system, when the drum
is turned on, the paper actually lifts off the drum. This is called centrifugal force and it is the basis behind making the hook and
loop system work for you. You will want to set your drum up so that the drum is not touching the wood, but when you turn your
drum on, centrifugal force will lift the paper off the drum allowing it to sand. You may have to change this adjustment depending
on which grit you have on your sander. This will leave an air gap between the drum and paper preventing heat build up. This
is a completely different concept than most people are accustomed to, but it is the only way to make the hook and loop system
work. People either love this system, or hate it. The ones who hate it are the ones who cannot understand this new concept.
The ones who love it will never go back. Also, when switching to this system, we recommend using 80 grit sandpaper and finer.
Any coarser and the sandpaper causes too much drag and the sandpaper sometimes comes unhooked.
4
Visit us at your local WoodShow - see page 5
“V”-Drum Sander
Item #
Price
Price
with fences
$485.00
$735.00
$569.00
$819.00
$609.00
$859.00
$139.00
---
$270.00
---
Size
DRFL18
DRFL24
DRFL30
DRFE1
DRFE2
18”
Flatmaster
24”
Flatmaster
30”
Flatmaster
Single Metal
Fence
Pair of Metal
Fences
This steel constructed sander comes preassembled, with a strong aluminum on MDF top. It comes in 3 sizes, 18”, 24”
and 30”. Each sander includes 2 additional rolls of paper (3” x 10yd, 100g and 180g). The purchaser needs to supply a
motor – ¼ hp for the 18” or ½ hp for the 24” or 30”. See motor specs below. Fences may be purchased separately or in
combination with Flatmaster. Each single fence comes with 2 Feather wheels. See pg. 13 for Sandpaper Rolls.
2” diameter drums (18”)
require a 1/4 hp motor
4” diameter drums (24” & 30”)
require a 1/2 hp motor
The Works Kit
The “Works Kit” includes the internal workings of the Sander. It includes a drum,
bearings, 2 - 10yd rolls of sandpaper, 2 balanced pulleys, link belt, and a DVD
on How to Build. (Visit our website for additional plans.) Sizes of bearings,
pulleys and length of link belt will vary according to the size of drum ordered.
Item #
Description & Size
Price
DR1212
12” x 2” Extended V-Drum *The Works
$205.00
DR1212A
$250.00
DR1812
18” x 2” V-Drum *The Works
$235.00
DR2412
$309.00
DR3012
$339.00
Drum Sander Top
Building a drum sander has always been very simple. It’s basically just a box with a lid. It’s very important that this lid is
just flat and smooth to achieve optimum performance from your drum sander. These tops are all pre-cut and made from
MDF with laminate on both sides. NEW -- Now you have the choice of 1-1/8” MDF with plastic laminate - DIY Series Tops
OR ¾” HD-MDF laminated with anodized aluminum – Pro Series Tops (only compatiple with 18” works kits).
Item #
Description & Size
DIY Series
Pro Series (Aluminum)
DRTOP18
Top for 18” V-Drum Sander
15” x 30”
$89.00
$139.00
DRTOP24
15” x 36”
$109.00
---
DRTOP30
15” x 42”
$114.00
---
Pre-Cut Drum Box
This kit contains 8 pieces of pre-cut and predrilled ¾” Baltic Birch plywood which may be easily assembled using hardware
you provide. A list of hardware required is included.
Item #
Description & Size
Price
DRBOX18
Drum Box - 18”
$122.50
DRBOX24
Drum Box - 24”
$130.00
DRBOX30
Drum Box - 30”
$145.00
See page 13 for “V”-Drum Replacement Sandpaper
5
Show Listing 2011-2012
Canadian Show List
Oct. 2, 3, 4 2009
Woodstock, ON
Woodstock Fairgrounds
Nov. 13, 14, 15 2009
Moncton, NB
Moncton Coliseum
Oct. 16, 17, 18 2009
Abbotsford, BC
Tradex
Nov. 27, 28, 29 2009
Ottawa, ON
Lansdowne Park
Oct. 23, 24, 25 2009
Calgary, AB
Stampede Grounds
Jan. 29, 30, 31 2010
Hamilton, ON
Hamilton Warplane
Museum
Oct. 30, 31, Nov. 1 2009
Edmonton, AB
Northlands Park
Feb. 12, 13, 14 2010
London, ON
London Fairgrounds
Nov. 6, 7, 8 2009
Saskatoon, SK
Prairie Land Park
Feb. 26, 27, 28 2010
Toronto, ON
International Centre
Mar. 12, 13, 14 2010
Kitchener, ON
Bingeman Park
US Show List
6
Oct. 23, 24, 25 2009
Dallas, TX
Big Town Exhibition
Hall
Feb. 5, 6, 7 2010
Milwaukee, WI
WI Expo Center
Oct. 30, 31, Nov. 1, 2
2009
Costa Mesa, CA
Orange County
Fairgrounds
Feb. 12, 13, 14 2010
St. Louis, IL
Gateway Center
Nov. 6, 7, 8, 2009
Portland, OR
Portland Metropolitan
Expo Center
Feb. 19, 20, 21 2010
Kansas City, KS
Overland Park Int’l
Trade Center
Nov. 13, 14, 15 2009
Sacramento, CA
Sacramento Convention
Center
Feb. 19, 20, 21 2010
Somerset, NJ
Garden State Exhibit
Center
Nov. 20, 21, 22 2009
Denver, CO
Merchandise Mart
Feb. 26, 27, 28 2010
Detroit, MI
Gibraltar Trade Center
North
Dec. 4, 5, 6 2009
Minneapolis, MN
Minneapolis Convention
Center
March 5, 6, 7 2010
Reading, PA
Greater Reading Expo
Center
Dec. 11, 12, 13 2009
Chicago, IL
Schaumburg Hotel and
Convention Ctr.
March 12, 13, 14 2010
Fredericksburg, VA
Fredericksburg Expo &
Conference Center
Jan. 8, 9, 10 2010
Baltimore, MD
MD State Fairgrounds
March 19, 20, 21 2010
Tampa, FL
Florida State Fairgrounds
Jan. 15, 16, 17 2010
Columbus, OH
OH Expo Center and
State Fair
March 26, 27, 28 2010
New England
Jan. 22, 23, 24 2010
Indianapolis, IN
IN State Fairgrounds
Apr. 9, 10, 11 2010
Chantilly, VA
Dulles Expo Center
Jan. 29, 30, 31 2010
Atlanta, GA
North Atlanta Trade
Center
Apr. 16, 17, 18 2010
Houston, TX
Merrell Center
Visit www.thewoodworkingshows.com
Apr. 23, 24, 25 2010
Huntsville, AL
Von Braun Center
Toll Free Ordering 1-877-287-5017
Ordering Information
Easy Ordering Online
Stockroom Supply is a mail order company only, and does not have a
retail outlet. For personal shopping, visit us “The Traveling Sandpaper
Store” at your local woodshow, or on our website www.stockroomsupply.
com.
Shipping Within Canada
See price chart on following page.
Shipping within Canada is “FREE” (using Expedited Parcel) when placing an order of
$200. or greater (before taxes.) Additional shipping will be charged to ship to an Airstage
address.
Shipping to the USA
Orders shipped to the USA are shipped using UPS. Orders typically take between 5 and 10 business days to
arrive at their destination depending upon stock availability. Faster shipping is available upon
request. Additional charges would apply. See price chart on the following page. Shipping
to the 48 US States is now “FREE” when placing an order of $200. or greater. Additional
shipping charges and/or an alternate carrier may be utilized when shipping to Alaska and
Hawaii.
Taxes
Orders to Ontario pay 5% GST and 8% PST. Orders to New Brunswick, Newfoundland, and Nova Scotia pay 13%
HST. All other orders within Canada pay 5% GST only. Tax is also charged on shipping costs. US customers
disregard all tax amounts.
Payment Options
We accept Visa, Mastercard, American Express, cheques and money orders. C.O.D. is available for an additional
charge of $8.00 within Canada only.
Minimum Order
There is no minimum order required with Stockroom Supply.
Quotes
Some sizes, grits or materials of sandpaper not listed in this catalogue may still be available. Feel free to call us and
we will let you know about availability and cost. Please note: when an item is ordered in special for the customer,
it is unable to be returned.
Return Policy
We will accept return of goods at no extra charge including freight when the following conditions apply:
1. We have made an error in shipping or processing your order.
2. There are defects in the product.
For items being returned due to the customer ordering wrong product, or for some other reason, all freight charges
will be paid by the customer. When an item is ordered in special for the customer (usually something not listed in
the catalogue), it is unable to be returned.
To Make a Return
Please
It is difficult to inspire others to accomplish what YOU haven't been willing to try
Free Shipping on orders of $200 or more within Canada AND USA
7
Order Form
Ship to:
Canada
USA
-- New Catalogue sent with every order --
Name:________________________________________________________
Address:_ _____________________________________________________
_________________________________ P.C. / Zip_____________________
Ph:______________________ Email:________________________________
Payment Method:
Cheque -
Cdn
Order by:
US
Easy Online Ordering:
www.stockroomsupply.com
C.O.D.
Phone: 1-877-287-5017
8 am - 4 pm EST Mon. - Fri.
VISA, MC, AMEX
Card #_______________________________
Expiry:_______________________________
Signature:_ ___________________________
Product #
(optional)
Page #
Qty
Email: [email protected]
Mail: Stockroom Supply
53032 Perry Rd.
Wainfleet, ON L0S 1V0
Grit
(if req’d)
Description
Price
Subtotal
..........................................Shipping
Ontario
All other
Provinces
USA
$0-$150
subtotal
$8.00
$150 - $200
subtotal
$6.00
$10.00
$8.00
$15.00
$13.00
FREE
SHIPPING
C.O.D. (Canada Only)(Add $8.00)
USA TOTAL DUE or Cdn. Subtotal
5% GST
13% HST (NB, NF, NS Only)
8% PST (Ont. Only)
Canadian Total Due
On all orders over $200.
within Canada and USA!!!
Some restrictions apply - See previous page
8
Toll Free Order Phone 1-877-287-5017
Extended
Price
Feather Wheels
able
ord
An Aff
DOWN
HOLD
SYSTEM
Feather Wheel
with Mounting
Bracket
Item #
Features
Size
Feather Wheel
FW2000
•• non-marring
with Mounting
•• conforms to irregular shapes
Made from a very flexible, rubber•• inexpensive hold down system like material, these wheels will flex
•• excellent shock absorption
to conform
to the shape and thickness of
•• abrasion resistant
Price Each
Price Pair
$35.99
$64.99
anything you may be trying to
hold down. These great little wheels
will maintain a constant pressure on
the wood, without causing needless damage to a finished surface. Feather
Wheels are tough enough for commercial use and come with a lifetime
warranty.
Vacuum Table
The Contour 500
For use with Stockroom’s Flatmaster or V-Drum Sander
and fences (Stockroom’s fences not mandatory).
Designed to parallel and thickness sand. Includes foam
sealer, plugs, vacuum attachment, brackets for fences.
Top Side
Under Side
The Contour 500 will allow the user to shape wood at a
professional level by blending in curves and dips. Using
a hook and loop system and a brand new sandpaper that
we like to call “Soft Gold”, this top of the line foam backed
sandpaper won’t load or build up heat. Great for paddles,
intarsia, Queen Ann legs and whatever your imagination
can create! Comes with 1 loading of 4 grits – 80, 120,
220 and 320.
Item #
Outstanding for
Segmented Bowls
Description
Price Each
CONT500
The Contour 500
$479
ROFLEXA
*Replacement Paper
Large Drum
$14.95
Item #
Description
Price Each
ROFLEXB
*Replacement Paper Small
Drum
$6.95
VACTABA
Vacuum Table
16” x 17”
$139.00
9
Balanced Drive Systems
Balanced Drive Systems
•• Anti-Vibration
•• Stops your machine from shaking
•• Reduces noise
•• Reduces bearing wear
•• Makes smoother cuts
•• Prolongs blade life in saws
•• Speeds up the finishing process
Anti-Vibration Drives for all
your shop machines
Drum Sander •• Belt Sander •• Drill Press •• Table Saw •• Band Saw •• Jointer
And More…
Anti-Vibration Link Belt
This super flexible drive belt greatly reduces the transfer of vibration with all your woodworking
machines. Unlike a rubber belt, which will take the shape of the small diameter pulleys that are used on
most woodworking machines, the individual link on this drive belt keeps it flexible for life. It is also very
easy to use and can be adjusted to any length. Available in 3/8”, 1/2” and 5/8”.
Item #
Size
Price
LB180
1/2” link belt x 18” length
$10.50
LB360
1/2” link belt x 36” length
$20.99
LB120
1/2” link belt per foot
$7.00
LB120A
(drill press, some tablesaws)
$8.00
LB120B
$14.99
Balanced Pulleys
Many woodworking machines, even brand new machines, use unbalanced pulleys. These work great for the average
woodworker, but these days woodworkers are spending big bucks on blades and knives. With these new technology
balanced cutters, you should probably consider balanced pulleys for your machines. Used in combination with linkbelt,
there will be no vibration transmitted from a balanced drive system. These pulleys are machined cast iron and are a
significant upgrade to any machine for a minimal cost.
Item #
Size
Price
PUAK17X1/2
½” x 1.8” (for 18” drum- on drum)
$9.99
PUAK20X1/2
½” x 2” (for 18” drum- on motor)
$9.99
PUAK30X5/8
5/8” x 3” (for 24” & 30” drum on both drum & motor)
$12.99
PUAK22X5/8
5/8” x 2” (for tablesaw - both & bandsaw for motor)
$9.99
PUAK46X3/4
3/4” x 4.45” ( bandsaw - top pulley)
$19.99
10
Toll Free Ordering - 1-877-287-5017
GREAT
PRICE!
Accessories
Low Profile Pillow Block Bearings
Complete with the locking collars, the compact size of these bearings allow the drum
diameter to clear the bearing. ½” for the 2” diameter drums. 5/8” for the 4” diameter drums.
DR5001
½” (pair)
$30.00
DR5002
5/8”(pair)
$30.00
Motor Arbor Adapters
Allows you to adapt a Sanding Mop, buffing wheel, etc. onto the end of an electric motor.
Locks into place with allen screws. MO1003 and MO1004 are extra long motor arbor
adapters that allow you to spin accessory farther away from motor.
MO1001
½” Standard
$8.99
MO1002
5/8” Standard
$8.99
MO1003
½” Deluxe
$18.99
MO1004
5/8” Deluxe
$18.99
Flexible Coupling
Allows shaft to attach directly to motor. Locks into position with the use of allen screws.
Item #
Size
Price
DR5003
1/2”
$12.99
Hook & Loop Faceplate
Use as a disc sander on the end of an electric motor. Just slide onto shaft, lock it in place
with the allen screws and instantly you’ve created your own 8” hook and loop disc sander.
DR5023
½”
$22.99
DR5024
5/8”
$22.99
Keyless Chuck
Slides onto a shaft and instantly creates a new place for drill bit, Sanding Mop, etc. Locks
into position with allen screws.
DR5013
1/2”
$19.99
DR5014
5/8”
$19.99
The secret to making sandpaper work for you is to choose the right grit for the job. The bigger
the grit the more material you will remove. Therefore, always use a coarse enough grit to
remove the imperfections quickly then start stepping up thru the finer grits. Each finer grit
removes the scratches from the previous grit. Soon the surface will have no visible scratches
and will be smooth to the touch.
Stockroom Supply - Abrasive Specialists
11
Jig Making Accessories
3/4” Mitre T-Track
Make a Fence
for your “V”-Drum
Sander
Fits standard mitre gauge or can be used
with the T-Bolts we sell. Great for making your own fences and jigs.
T-Bolts
Item #
Size
Price Each
JM1200
11-3/4”
$5.25
JM2400
24”
$9.95
JM3600
36”
$14.75
JM4800
48”
$19.49
These work great for jigs, fixtures and hold-downs. All of these heavy duty T-Bolts will work in the 3/4” Mitre T-Track we
sell. The 3/8” T-Bolts are the most popular and work with the 3/8” through knobs. T-Bolts are priced and sold individually.
Item #
Size
Price Each
JMT516x112
5/16” x 1-1/2”
$2.00
JMT516x212
5/16” x 2-1/2”
$2.00
JMT38x212
3/8” x 2”
$2.00
Knobs
Work great for building your own fences and jigs. The 3/8” through knob is the most
popular and works with the 3/8” T-Bolts. Knobs are priced and sold invididually.
Item #
Size
Price Each
JM516F
5/16” Through Knob
$1.50
JM038F
3/8 “ Through Knob
$1.50
JM516M
5/16” with 3/4” shaft
$1.50
JM011
4 pc 3/8”
Through Knobs & 4 pc
3/8” x 2” T-bolts
$12.00
What we mean when we call
sandpaper FRESH
We must sound like we are selling you fruit or vegetables, but believe it or
not, sandpaper can get old and rotten too! You the consumer need to be an
informed buyer! Think about this scenario. You stop by a local retail store and
grab a sheet of 80 grit sandpaper for a special project. At home in the workshop,
you use that sheet of paper and it is lasting a long time ‑ cuts like crazy, doesn’t
load up ‑ just exactly what you expected. Your project is just about complete
when that sheet of paper is too worn out to continue. Off to buy another sheet
of sandpaper, only this time you stop at a different store. The sheet is exactly
the same brand and grit, so you assume the same quality as before. This time
though, the grit appears to fall off fairly easily and it is wearing out much more
quickly! What you have just experienced is the result of “OLD” sandpaper. You
will find this scenario can happen with belts, sheets, discs or anything “abrasive”.
When sandpaper becomes old, or subjected to improper storage conditions, the
glue may become dried out. This causes the sandpaper to become brittle and
the grit falls off prematurely.
When purchasing sandpaper, try to buy the freshest possible. It will cost you
less in the long run.
12
Visit our website www.stockroomsupply.com
Sanding Rolls
Flatmaster / “V” Drum
Sander Rolls
This Stearate coated aluminum oxide paper
backed roll, is primarily sold for our “V” Drum
Sander. It is the same outstanding material as
our hook & loop discs. Get the finish you desire
without your paper loading up.
Paper of Choice
for the
“V” - Drum
W
L
60
80
100
120
150
180
220
240
320
400
or 600
800,
1200, or
1500
3”
5yd
$11.95
$10.95
$10.95
$10.95
$10.95
$10.95
$10.95
----
$10.95
----
----
3”
10yd
$23.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
----
----
3”
25m
$49.95
$42.95
$42.95
$42.95
$42.95
$42.95
$42.95
$42.95
$42.95
$42.95
$49.95
4”
25m
$74.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
----
----
4.5”
5yd
$19.95
$13.95
$13.95
$13.95
----
$13.95
$13.95
---
$13.95
4.5”
25m
$94.95
$65.95
$65.95
$65.95
$65.95
$65.95
$65.95
$65.95
$65.95
Cut
---- 4‑1/2” rolls
---to length for
1/4 sheet and
------½ sheet
sanders
What Does Stearate Coating Mean?
Numerous particles of abrasive grit are glued to paper or cloth to be used as sandpaper. If you magnify a tiny piece
of this grit, you would discover it to be irregularly shaped. When a stearate coating is applied over this grit, it fills in
the area around the bottom of each piece of grit where sawdust, paint, and varnish debris can get trapped and cause
the surface to become plugged. This zinc stearate coating fills in those nooks and crannies, while maintaining the
cutting ability of the sandpaper, and with Klingspor’s special coating, no residue from the process is left behind when
you sand. Because of this surface treatment, the sandpaper becomes a non-loading paper thus meaning longer life
from your sandpaper investment. Due to less debris stuck into the paper, there is less friction and less heat build-up,
further extending the life of the paper (as well as the sander you may be using). The sandpaper also has better
flexibility when coated and the grit does not come off as easily.
Klingspor’s slogan is “The Most Sanding Power for Your Money!”, and that is the truth. Whether you are a hobbyist
or professional craftsman, you will appreciate the performance of Klingspor’s stearate coated products and the
premium finish you will receive. It is definitely worth the extra money spent, no questions asked!!
Hook and Loop Conversion
This is industrial strength hook & loop conversion using VELCRO® brand hook and loop
fastening system, with a premium adhesive backing - meaning tremendous holding
power. Now if you need to, you can replace the hook and loop on your “V”-drum or
convert an existing drum sander to the hook and loop system. Consider the possibilities
with this versatile product.
Item #
Description
Price
CV1003
3” wide - per foot
$5.99
CV1006
$8.99
CV1012
$12.99
Can I convert my existing drum to hook and loop?
Yes, but first it is suggested that you read the detailed answer to this question on page 4.
STOCKROOM SUPPLY - Abrasive Specialists
13
Sanding Rolls
Hook and Loop
Heavy Paper Rolls
We are carrying this in our catalogue primarily for those who wish to have a
heavier paper for their projects. It is best used with drums that have a diameter
of 4” or greater. This hook and loop, heavy backed paper is an open coat,
anti‑static aluminum oxide for hard and soft woods.
Width Length
60
80
100
120
150
180
220
3”
25m
67.95
$60.95
$60.95
$60.95
$60.95
$60.95
$60.95
4”
25m
94.95
$84.95
$84.95
$84.95
$84.95
$84.95
$84.95
4-1/2”
25m
119.95
$107.95
$107.95
$107.95
$107.95
$107.95
$107.95
Cloth Back Drum Sander Rolls
For optimum performance on both hard and soft woods, this polyester,
open‑coat abrasive is exactly what is recommended for your commercial
drum sander unit.
Width
Length
80
100
120
150
180
220
240
2”
50m
$128.00
$128.00
$128.00
$128.00
$128.00
$128.00
$128.00
3”
50m
$169.00
$169.00
$169.00
$169.00
$169.00
$169.00
$169.00
3”
18m
$56.00
$56.00
$56.00
$56.00
$56.00
$56.00
---
4”
50m
$234.00
$234.00
$234.00
$234.00
$234.00
$234.00
$234.00
5”
50m
$297.00
$297.00
$297.00
$297.00
$297.00
$297.00
$297.00
6”
50m
$354.00
$354.00
$354.00
$354.00
$354.00
$354.00
$354.00
— Use in Conjunction with Abrasive Cleaning Block for longer Sandpaper life ---
Cloth Back Shop Rolls
These general purpose shop rolls are handy to have around for a wide range of metal and woodworking tasks
you come across in your workshop. Especially useful for wood turners and carvers with the flexible cloth
backing. Most popular grits are 80, 120 and 220.
Width
Length
80, 100, 120, 150, 180,
220, 240, 280, 320
400
500
600
1”
10yd
$9.50
$9.50
$9.50
$9.50
1”
50yd
$26.95
$26.95
$26.95
$26.95
1-1/2”
50yd
$39.95
$39.95
$39.95
$39.95
2”
50yd
$49.95
$49.95
$49.95
$49.95
3”
50yd
$89.95
--
--
--
J‑Flex Rolls
Klingspor “Gold” non‑loading J‑Flex rolls are the same unique cloth backed
material as the Sanding Mop. This incredibly flexible and durable product
will astound you with its’ life span. Turners will be in their glory with the
performance and availability of this product.
14
Size
120
220
320
400
1 of each grit
2” x 5’
$6.50
$6.50
$6.50
$6.50
$23.00
View o
ur we
bsite f
or
ON
LIN
DEMO E VIDEO
NSTRA
www.s
TIONS
to
ckroom
The Sanding Mop
A must for
woodworkers...
If you are a woodworker and you do any sanding
on contoured edges or irregular surfaces, the
“Sanding Mop” is the product for you!!
This neat little product sands some
of the hardest to get at spots. Great for wood moulding, raised panel doors,
carvings, bowls, furniture, table legs, restoring antiques... When your option
seems to be “I guess I’ll have to sand it by hand”, let the Sanding Mop do
it for you and watch it leave the detail on your piece along with a beautiful
finish! This outstanding product is made from Klingspor’s best stearate coated,
extremely flexible sanding cloth. The gold coloured aluminum oxide abrasive
grit is designed for metal or wood, stearate coated so it won’t plug or heat up,
and glued to a double woven Egyptian cloth for the best flexibility and the longest
wear available.
Keep in mind that the sandpaper material used in these mops, also works great on metal. These mops work
excellent when removing oxide and clear coat before buffing, while maintaining the detail of the piece. You’ll wonder how
you ever got along without it!
supply
.com
How to know which
grit(s) to use?
6” Regular mop using stabilizers on a 1/4” mandrel
6” Fluffy mop using spacers on an extra long mandrel
The Kits We Sell:
Regular Mop
– Most popular seller. Use for routered edges, general
purpose
Fluffy Mop
– Use in finer grits for inbetween coat sanding, intarsia,
carvings
Double Mop
- Use this in place of a regular mop when a wider
sanding surface is desired.
Sanding Mop grits available are 80, 120, 180,
220 & 320. When ordering 2 grits, keep in mind
that the most popular combination is the 120 &
220 grit ‑‑ a superior mixture for use on both
hardwoods and softwoods. 120g for hardwood,
220g for softwood
80 grit ‑ Very aggressive ‑ for rough hardwood,
furniture stripping, log home refinishing, patio
furniture.
120 grit ‑ Most popular grit for hardwood
mouldings, panel doors, turnings, legs.
Exceptional performance when used with
stabilizers on routered edges.
180 grit ‑ mainly used on MDF, poplar and other
medium hardwoods. Excellent grit in production
shops for pine.
220 grit ‑ Our most popular finishing grit.
Excellent performance on pine. Can be used
with stabilizers for edges or with spacers for
initial in between coat sanding.
320 grit ‑ The most substantial time saver when
used with spacers for finishing a project. It does
all the in‑between coat sanding on carvings
and even on assembled raised panel doors.
Excellent set up grit for polishers.
Sanding Mops are made from Klingspor’s finest flexible
clothback material, pre‑slit to prevent detail loss on
your project. This gold colour sandpaper is absolutely
outstanding!
We ship to Canada and USA
15
Your
Buildwn
O ing
Mould
r
Sande
Moulding Sander
One Cus
tomer s
This cra
ays...
greatly re zy sanding mop
duce
actu
ally work
d the sa
maintain
ndin
s!
th
e standard of q g time needed a The mop has
uality of
nd also
Scott Sta our mouldings. helped
Thanks.
nton - O
wner
Design M
o
Laurel, N ulding
ebraska
View our website for
ONLINE VIDEO
DEMONSTRATIONS
Traditionally, moulding sanders have been very
expensive, even though they perform a simple task.
We have developed a “Build-Your-Own” moulding
sanding system by using a custom made arbor,
along with our sanding mop sheets. The sanding
mops are stacked onto the shaft to create an 7”
moulding sander head. Anyone who has ever used a
sanding mop will know how well this system works.
With a bracket assembly, you have a fully adjustable
moulding sander. Just bolt to a base and supply your
own motor. Extra sanding heads are sold separately
making grit changes quick and easy.
ELM1100 - 120/220 Moulding Sander Head Only
ELM1400 - Moulding Sander (single grit) with bracket
assembly (link belt not shown)
16
Item #
Description
Price
ELM1400
Moulding Sander Kit
with Bracket Assembly
$289.00
ELM1200
Moulding Sander Kit
$250.00
ELM1100
Moulding Sander
Head Only
$195.00
ELM1040
Moulding Sander Refill
120/220 Combo
$160.00
ELM1000
Moulding Sander Refill
single grits
$130.00
ELM004
Moulding Sander
Bracket Assembly
$69.00
ELM010
Moulding Sander
Shaft
$69.00
ELM004 - Moulding Sander bracket assembly
Each moulding sander head comes preassembled. You
have a choice of buying a moulding sander assembled with
one single grit or a sander where one half of the sander is
120 grit for aggressive sanding and the other half is 220
grit for finishing sanding. As well as the sanding head, the
kit comes with two 5/8” bearings, 3’ linkbelt, 2 balanced
pulleys (2.2” x 5/8” and 3” x 5/8”) for a 1/2 hp 1750 rpm
motor (not included), and a plan on how to build a moulding
sander. Find the pattern and more pictures on our website
www.stockroomsupply.com.
The Sanding Mop
Kits
Regular Mop Kit
Fluffy Mop Kit
Double Mop Kit
Includes 48 sanding strips, 1 regular Includes 48 pc sanding strips, 1 Includes 96 pc sanding strips, 1 extra long
mandrel, 5 spacers and 2 stabilizers extra long mandrel, 20 spacers and mandrel, 2 stabilizers
2 stabilizers
Choose from these grits - 80, 120, 180, 220 & 320
3 in 1 Mop
This preassembled model
includes a regular 120g and
220g mop and a 220g fluffy
mop all on one shaft. Built
specifically for a drill press.
Has a bottom bearing and
bracket for mounting on drill
press table.
A. Mandrel- 1/4” drill or drill press mount with
½” diameter by 1” long shaft for stacking the
sanding mop strips. B. Extra long mandrel.
3/8” shaft with 3”
D
to stack sheets. C
& D.- Motor Arbor
C
B
Adapters- Made
to use with electric
a
motors. Just slide
adapter onto shaft
and lock in place
with allen screws.
Spacers
Small washers to place between some of the
sanding mop strips to create a softer mop.
Come in packages of 5pc. ( Rubber garden
hose washers can also be used )
CHOOSE
1 grit
Variety Pac
– Any 2 Grits
4” Regular Mop
$25.00
$45.00
6” Regular Mop
$40.00
$72.00
6” Fluffy Mop
$44.00
--------
6” Double Mop
$72.00
--------
4” Refill strips – 48 pc – single grit
$20.00
$39.00
6” Refill strips – 48 pc – single grit
$34.00
$66.00
3 in 1 Mop
$180.00
--------
* 120 & 220 grits are the most popular combination
120 g for hardwood, 220 g for softwood
Accessories
Mandrel and Motor
Arbor Adapters
Item
Stabilizers
Large white nylon discs which are used
on the outside of the sanding mop
to create a stiffer more aggressive
sanding mop. These stabilizers keep
the sanding strips packed together and
only the tips of the strips are used to
sand. They are made from a special
material that does not mark wood.
Item #
Size & Description
Price
A MO1000 1/4” drill/drill press mandrel with ½” shaft
$7.00
B MO1010
3/8” Extra Long mandrel with ½” shaft
$9.00
C MO1001
½” Standard Motor Arbor Adapter
$8.99
C MO1002
5/8” Standard Motor Arbor Adapter
$8.99
D MO1003
½” Deluxe Motor Arbor Adapter
$18.99
D MO1004
5/8” Deluxe Motor Arbor Adapter
$18.99
MO4045
4” Stabilizers (pair)
$5.00
MO6045
6” Stabilizers (pair)
$5.00
MO0001
Spacers (5 pc)
$2.00
Visit us at your local woodshow - see page 3
17
The Sanding Mop - FAQ’s
1- What size Sanding Mop should I use?
If you are a woodworker we suggest that you use a 6” Mop because it does not
require the same amount of RPM’s as the 4”. A 4” Mop requires a minimum
speed of 4000 RPM’s and most woodworkers do not have the tools to run
a 4” properly. You will not get the life out of a 4” Mop running it on a drill as
you will out of a 6”. If you are working with metal we suggest you use a 4”
and run it using air tools. Overall, you are going to get a longer life out of a
6” Sanding Mop.
2- How long will my Mop last?
One thing to remember about the mop is that speed is the key. The faster you
spin the mop the longer they will last and the better they will work. 6” mops
need to be spun between 2000 and 3500 RPM’s. 4” mops need to be run
between 4000 and 10,000 RPM’s. Cordless drills and some electric drills do
not have the required RPM’s to achieve optimum results.
3-How can I make my mop bigger and more
flexible?
You can purchase the parts for a fluffy mop or do the following if you already
have a regular mop. Buy an extra long mandrel (see pg. 17) or pick up a ½” x
4-1/2” hardened bolt at your local hardware store and use 10 or more spacers
with one package of sanding strips to produce a soft, 3” wide sanding surface
for even larger contours. Especially effective with the 6” mop and great for
raised panel doors or in-between coat sanding. This form of the Sanding Mop
is best being used with only the finer grits, 220g and 320g.
4- What is the difference between a spacer and
a stabilizer?
First of all, these two products are not meant to be used together. Spacers
are small rubber type washers used between the strips of sandpaper to
create a softer more pliable mop. Using one spacer after every 4 sheets will
produce this effect. The advantage is that you will have a unit that will fit itself
around a larger contour. On the other hand, stabilizers are larger white nylon
discs. When one disc is mounted on each side of the assembly, a firmer,
more aggressive mop is created where only the tips of the little fingers are
allowed to sand.
5- How do I break in my mop?
In order to prevent your Sanding Mop from being overly aggressive it needs to
be broken in. Just hold a piece of scrap wood into your mop while it is spinning
for a minimum of 5 minutes. Once the fingers are all separated and the mop
begins to soften and become more flexible, you are ready to sand.
Assembly Suggestions
instructions online)
(view video
1. If you have a 4” Mop, separate sheets into 1” wide strips.
If you have a 6” Mop, go directly to step 2.
2.If you plan on assembling your mop with stabilizers, begin
by placing one white nylon disc over the mandrel. If you
don’t intend on using stabilizers, skip to step 3.
3.Hold two sanding strips with backs together (blue to blue,
grit sides to the outside). Line them up straight and place
over arbor (see Fig. A). Lay a 2nd set over the arbor at
90° to the 1st set, to create a cross (see Fig. B).
4.If you will not be using spacers, skip to step 5. If you
intend to use the red spacers, you would now place one
spacer over the arbor and continue to put one spacer
on after every 2 sets (4 sheets). (On the mandrel which
comes with the kit, you can fit 24 sheets with 5 spacers,
giving you 2 soft mops with each kit.)
5.Continue criss‑crossing sets (see Fig. C) until you reach
the thickness of mop you desire ‑ between 16 and 48
strips.
6.If you are not using stablizers, skip to step 7. If you are
using stablizers, place the other white stabilizer over the
mandrel.
7.Tighten the nut and you are ready to use your mop! Place
unit securely in a drill, drill press, lathe, bench grinder...
Before using your mop, break it in by holding a peice of scrap
wood up to it for several minutes. This will help to break apart
the fingers and increase your mops’ flexibility.
To ensure your safety, the use of mask and goggles are
recommended.
6- Will one grit of Sanding Mop sand both
hardwood and softwood?
Yes, but 120g may take the crisp edge off the profile in softwood and 220g
may glaze hardwood. Therefore we recommend using 120g only for sanding
hardwoods and 220g for sanding softwoods or in-between coats with the use
of spacers.
7- Can I strip paint with the Sanding Mop?
The sanding mop works great for stripping paint. What we suggest you do is
cover the piece to be stripped with any paint stripper and allow it to dry until it
crystalizes (1-2 days). Once the paint stripper is dried, use a sanding mop to
sand down the piece. No need to worry about scraping or ruining the detail of
your piece. Just let the mop do the work.
Used a 6” x 80
grit sanding mop
on this 28’ square
barnboard floor
8- I have a CNC Router (Carver). What Sanding
Mop Kit do I want?
For hardwoods you would want to build a 120 grit Fluffy Mop and for
softwoods, you would want to build a 180 grit Fluffy Mop.
Quick Tips
* The faster you spin your mop the better it will work and the longer it will last. The 6” requires a minimum of 2500RPM and the 4” requires a minimum of
3000RPM.
* When using the mop, let the finger tips do the work. If you press or push into the mop it will wear down very quickly.
*The Fluffy mop is designed for sanding raised panel doors, carvings, etc. The more spacers added to your mop the less aggressive it will be. Fluffy mops work
best with 180, 220, and 320g, although they can be used with any grit.
* Regular Mops are designed for sanding corners, edges and things that require more aggression. We
recommend 120g for hardwood and 220g for softwood.
Wat
* Before using your mop make sure to break it in by holding it up to a scrap peice of wood for approx.
Assem ch Video
5 minutes
bly Ins
tru
* The Sanding Mop is not a shaper, it is a profile sander that will sand anything with a profile and
Online ctions
leave the detail.
* Just like any new tool, play with the sanding mop a little to see which set-up works best for your
application
18
l
Specia
Router Bit Sets
Insert
its
uter B
o
R
y
t
Quali & more
n
ble i
availa
w
o
N
a
Order from
Canad
Stockroom Supply
4 PC Super Joint Set
The two 45° lock miters
are perfect for producing
flawless 90° joints for
all of your cabinetry
frames and furniture
WL-1420-4
in most sizes of material, the reversible glue joint for all your edge to edge
jointing needs, and the drawer lock to turn your router
table into a drawer production factory.
WL-1420-4 1/2” Shank Only $111.25
Bit #
1
2
3
4
description
Lock Miter - 2” Diameter for 1/2” to 7/8” thickness material
Lock Miter - 2-3/4” Diameter for 5/8” to 11/16” thickness material
Glue Joint - 1-1/4” Cutting Length by 13/4” Diameter
Drawer Lock - 1/2” Cutting Length by 13/4” Diameter
3 PC Raised Panel Door Set
Our 3-piece cabinet set
includes a panel raiser and
rail and stile bits. Available
in three mix and match design
WL-2019-1 Ogee Set
profiles. All styles with the
undercutter produce a true 1/4” tongue automatically.
All 1/2” Shank
3/8” Deep Rail & Stile with 1/4” Tongue and 3-1/4” Panel Raiser
Item #
WL-2019
WL-2019-1
WL-2039
WL-2039-1
WL-2040
WL-2040-1
WL-2041-1
Rail & Stile/Panel Raiser Profile
Roman Ogee/Ogee without undercutter
Roman Ogee/Ogee with undercutter
Roundover/Convex without undercutter
Roundover/Convex with undercutter
Cove & Bead/Traditional without undercutter
Cove & Bead/Traditional with undercutter
NEW! 15° Facecut with undercutter
Price
$81.25
86.25
81.25
86.25
81.25
86.25
86.25
Arch Panel Template Set
Use our 10 piece template set for arched raised panels
and matching arched rails. Make any door size between
9½” and 22”. Templates are made of rugged HDPE
plastic. NOW works with our Panel Master system shown
below.
Style
Price
WL-APC
Item #
Cathedral Profile
$73.75
WL-APR
Roman Profile
73.75
WL-2040-1
Shaker set
Ogee Raised Panel
Roundover Rail & Stile
WL-2039-1 Cutting Profile Cutting Profiles
Roman Ogee Rail & Stile Cove & Bead Rail & Stile Traditional Panel Raiser
WL-2019#WL-2020-1
WL-2040-1 Cutting Profiles Cutting Profiles
Cathedral
Roman
WL-APC
Convex Panel Raiser
Cutting Profile
Panel Master Arch Panel System
This kit includes two metal
sure-grip handles with four
1/4”X20 T-bolts and two
knobs. Attach to a BlueMax™
360 series clamp for a
safe and effective small parts
handler. When used in
conjunction with our arch panel templates (sold above)
you will be able to efficiently and safely produce arch
panel doors without the bother and mess of double-stick
tape. Full instructions are available at www.woodline.com.
WL-5191
Panel Master Arch Panel System
$30.00
3 PC CABINET ACCESSORY Set
If you already own one or more
of our 3 pc Raised Panel Door
Sets, enhance your skills with this
accessory set. This will turn any
of your 3 pc Raised Panel Sets
into the 6 pc Cabinet Set shown
on right.
WL-1420-4
1/2” Shank Only
Bit #
1
2
3
sam maloof signature series
6 pc Cabinet Set
Elegant and sturdy cabinet doors
are within your reach with our
fabulous 6-piece complete cabinet
door set. You will have everything
you need to create raised panel
doors for kitchens, bathrooms,
grandfather clocks, media centers,
and fine furniture projects. This set
includes the popular ogee raised
panel with 2-piece Roman ogee rail
& stile, reversible glue joint to bookmatch
and face front panels and drawer lock bit
WL-2020-1
to easily build drawers. Also included is a door lip which adds a
finger-pull style profile to the door or drawer edge. WL-2020-1
includes the optional undercutter on the panel raiser to produce
a true ¼” tongue without having to worry about the thickness of
the material. All 1/2” Shank Only
Item #
WL-2020
WL-2020-1
WL-2054
$86.25
description
Drawer Lock: 1/2” CL by 1-3/4” CD
Reversible Glue Joint: 1-1/4” Cutting Length by 1-3/4” CD
Door Lip: European style by 1-1/4” CL
Don’t have a ½” Router?
See page 24 and 28 for a selection of suitable ¼” bits!
15 Facecut Rail $ Stile
15 Facecut Panel Raise
WL-2041-1 Cutting Profiles
Bit #
1*
2
3
4
5
6
Feature
no undercutter
with undercutter
price
$148.75
148.75
Type / Description
Raised Panel Bit: Ogee 3-1/4” Cutting Diameter with Undercutter
Stile Cutter: Roman Ogee with 1/4” Tongue by 3/8” Deep
Cope Cutter: Roman Ogee with 1/4” Tongue by 3/8” Deep
Reversible Glue Joint: 1-1/4” Cutting Length by 13/4” CD
Drawer Lock: 1/2” CL by 1-3/4” CD
Door Lip: European style by 1-1/4” CL
Note: * WL-2020 Raised Panel Bit comes without Undercutter
Safety Note: All Bits on this page must be used with a variable speed router.
19
Accessories
Route-R-Joint ™
Precision Dovetail Joinery System
You’ve seen on DIY Network how easy it is to make high precision joints for drawers, boxes and
furniture easier that ever before with the new Route-R-Joint™ from Woodline USA. Half blind
dovetails, keys and even heart-shaped joints are simple to create using the Route-R-Joint™ system.
Interchangeable guide templates allow switching from dovetails to heart shaped joints in less time than it takes to
change a router bit. Amateurs, children and professional woodworkers will enjoy the ease of use, safety and simplicity
.
No more complicated setups, no having to re-learn complex setups after a few days out of the shop. Just put in a bit,
install the guide bushing, clamp the wood in the jig and PRESTO! Perfect joints every time!
WL-RJT Route-R-Joint System $229.00
Kit contains the following:
Replacement and supplemental
templates available:
WL-RJ1
Half Blind Dovetail Finger Set
WL-RJ2
Through Dovetail Finger*
WL-RJ3
Heart Finger Set
WL-RJ4
Key Finger Set
WL-RJ5
New Hearts Template
WL-RJ6
Big Keys Template
WL-RJ7
Locks Template
WL-RJ8
New Wave Template
WL-RJ9
Lollipop Template
WL-RJ10
Arrowhead Template
WL-RJ11
Teddy Bear Template
WL-RJ12
Pin & Crescent Template
WL-RJ13
Dog Bones Template
WL-RJ14K 3/4" Dovetail Template Kit**
* use with half blind set
** WL-1305 Dovetail Bit included in Kit
RJR4
$22.50
11.25
22.50
22.50
22.50
22.50
22.50
22.50
22.50
22.50
22.50
22.50
22.50
25.00
Guide block makes setup easy.
RJR6
RJR8
Spiral Bit is included
RJR10
RJR11
RJR12
RJR13
RJR3, RJR5, RJR7, RJR9
Woodline spacer fence System
There are numerous joints
that can be made with the
Woodline USA Spacer
Fence System. Make box
joints with no limitation on
the length of the project.
Stock can be as thick as
1-1/4”. Great for combination Joints, rabbet, dado,
spline dovetails, and even double dovetails. Sliding dovetails are
excellent for sturdy drawer glides. Kit includes: 1/4”, 3/8” &
1/2” Spacer Fences, Positive Stop Set Up Block, Dovetail Liner Offset
Fence, 5 Piece Set of Brass Measuring Bars, Instructional DVD and
booklet. WL-8010 Woodline Spacer Fence System $159.95
WL-1003S
WL-1022S
WL-1025S
WL-1312
WL-1314
WOW STD
WL-1003S-1/2
WOW 1/2
SPIR STD
SPIR 1/2
1/4” Spiral for 1/4” Box Joints 1/4” Shank
14° 1/2” Dovetail Bit 1/2” Shank
14° 3/4” Dovetail Bit 1/2” Shank
1 each of the five bits shown above
1/4” Spiral for 1/4” Box Joints - 1/2” Shank
WOW Std but all w/1/2” Shank
1 each 1/4” ( 1/4” Shank), 3/8” & 1/2” Spirals
1 ea 1/4”, 3/8” & 1/2” Spirals - all 1/2” Shank
$17.50
43.75
43.75
8.25
10.00
111.25
31.25
124.00
99.00
111.00
ULTIMATE JOINERY Deluxe COMBO system
By popular demand, we’ve packaged our systems to allow
you to have both the Route-R-Joint™ and our Spacer Fence
systems at a fabulous price. It’s sure to keep you busy for a
long time. You get the entire Route-R-Joint™ including an
optional template set PLUS the Woodline Spacer Fence System on this page! If purchased separately, this system would
cost $475! We box it up together and save you $$!
WL-COMBO Woodline Combo Joint System $379.00
20
QTY
2
1
1
4
4
1
1
2
1
1
1
8
8
8
3
2
1
1
1
1
1
1
ITEM
End block
Position guide block
Center plate
T-bolt
Knob
Aluminum Angle
Plywood subplate
Toggle Clamp Assembly
.308 Bushing
5/16" (.3125) Bushing
7/16" Bushing
# 8-32 1" flat head screws
# 8-32 1" nuts
# 8 lock washer
# 8 pan head screws
No-Slip sand paper strip
Dovetail finger set
Heart dovetail finger set
Key dovetail finger set
3/16" Spiral bit WL-1002S-ES*
Dovetail bit WL-1303-1**
Brass bushing centering pin
How-To Videos
Learn to use your new bits and tools. These tools are the
perfect compliment to many of our sets and individual bits
Part
WL-V3
WL-V6
WL-V7
WL-DVD5
WL-DVD6
WL-DVD7
WL-DVD9
WL-CDM
Title
Making Picture Frames
WOW Spacer Fence Video
Route-R-Joint Video
Cabinet Making DVD
(includes making arch top doors)
WOW Spacer Fence DVD
Route-R-Joint DVD
Lock Miter, Drawer Lock & Glue Joint
Molding Manual on CD
Price
16.00
16.00
16.00
22.00
22.00
22.00
22.00
16.00
Inlay Kit
This system comes with a brass inlay template
guide with a brass spacing bushing and is designed to fit a 13/16” standard size accessory hole.
This set comes with our premium 1/8” solid carbide
down spiral for the finest quality cutting possible.
WL-INLAY
Inlay Kit
$25.00
Inlay Templates
Set of basic inlay shapes is made of HDPE and will last for
years of pin router or inlay use. Each template is 6” x 6”.
WL-NLT1 Inlay Template Set #1
WL-NLT2 Inlay Template Set #2
WL-NLT2S Inlay Template Set #2S
$25.00
25.00
25.00
brass Template Guide Kit
Includes 2 brass lock rings, seven template guides and adapter for those
routers that do not have the standard 13/16” hole in the faceplate.
Fits all Porter Cable® and
Black & Decker®, most
DeWalt®, ELU®, Freud®,
Hitachi® & Skil®
WL-WTS
$36.25
Router Bit Sets
Setup blocks for cabinet sets
Save time and effort and increase precision with our HDPE
setup blocks to adjust the height of the rail & stile, drawer
lock or glue joint bits. It couldn’t be easier!
Item #
WL-1338SB
WL-1360SB
WL-1361SB
WL-1362SB
Style
15° Facecut Profile (Shaker)
Ogee Profile
Roundover Profile
Cove & Bead
Price
$7.00
7.00
8.75
7.00
9-PC Master Dado Set
Are you tired of rattling dadoes with undersized plywood
material? This set has been specifically designed to
meet all of your dado needs for 1/4”, 1/2”, and 3/4” materials, including bits specifically designed for undersized
plywood, standard hardwood and oversized melamine.
WL-2029 1/4” Shank $56.25
WL-2030 1/2” Shank $56.25
dimensions
1/8” R by 3/4” CD
1/4” R by 1” CD
3/8” R by 11/4” CD
1/2” R by 11/2” CD
WL-2002-7
WL-2024
Bit #
1
2
3
4
5
6
Description
1/4” CD by 3/4” CL
3/8” CD by 1” CL
1/2” CD by 1” CL
5/8” CD by 1” CL
3/4” CD by 1” CL
1” CD by 1” CL
Sides
16
12
8
6
4
$68.75
WL-1189-1
Shank Only
WL-2013
$111.25
description
1/4” Bead Diameter with 11/16” CL
3/8” Bead Dia. with13/16” CL
5/8” Bead Diameter with 1” CL
1” Bead Diameter with 13/8” CL
Our popular two-flute and three-flute flush trim bits all in
one set. You’ll always have the correct bit length at hand.
Bit #
1
2
3
4
5
6
Type
2-Flute
2-Flute
2-Flute
3-Flute
3-Flute
3-Flute
1/2” Shank Only
description
1/2” CD by 1” CL
1/2” CD by 1-1/2” CL
1/2” CD by 2” CL
1/2” CD by 1” CL
1/2” CD by 1-1/2” CL
1/2” CD by 2” CL
$73.75
WL-1206-6
6 pc Corner & Edge Beading
Bit Set
Produce a delicate attractive edge in a variety of sizes for
jewelry boxes, classic molding, fine furniture, etc,
WL-2023
This set has the six most popular sizes of straight bits and
is a super value for a beginner woodworker or a veteran
looking for a good quality set to replace an old one.
1/2” Shank Only
1/2” Shank Only
Description
11.25° by 1” CL
15° by 1” CL
22.5° by 1” CL
30° by 1” CL
45° by 5/8” CL
WL-1206-6
6-PC Straight Bit Set
WL-1021-6
WL-2032
6-PC flush trim Bit Set
WL-2001
WL-2024 1/4” Shank $37.50
WL-2024-1 1/2” Shank $37.50
Bit #
1
2
3
4
$98.75
Use for mitering frames, beveling & decorative edges.
Features 2-flute premium carbide precision angle
chamfer bits with high performance ball bearing guides.
Includes angles to produce 4, 8, 12, and 16 sided frames.
Bit
1
2
3
4
5
6
*Included in WL-2002-7 ONLY
4 PC BASIC ROUNDOVER SET
description
3/4” CD by 7/16” CL
5/8” CD by 3/4” CL
1/2” CD by 1” CL
3/4” CD by 1” CL
11/8” CD by 1” CL
3/4” CD by 2” CL
Chamfer Bit Set
WL-2013 1/2”
$61.25
$61.25
Dimensions
1/8” R by 3/4” CD
3/16” R by 7/8” CD
1/4” R by 1” CD
5/16” R by 11/8” CD
3/8” R by 11/4” CD
1/2” R by 11/2” CD
3/4” R by 2” CD
1/4” & 1/2” Shank
Shank
¼”
¼”
¼”
½”
½”
½” Dbl Bearing
Easily produce beautiful staircase
moulding, small furniture moulding, picture frames, table edges,
countertops and much more.
Roundovers create perfectly flush decorative
edges perfect for drawer fronts, cabinet
edges and small finish moldings.
Bit
1
2
3
4
5
6
7*
Bit
1
2
3
4
5
6
Bullnose Bit Set
Roundover Bit Sets
6 pc set
7 pc set
WL-2032
WL-1189-1
description
15/64” CD by 3/4” CL for 1/4” Undersized Plywood
1/4” CD by 3/4” CL for 1/4” Standard Hardwood
9/32” CD by 3/4” CL for 1/4” Melamine
15/32” CD by 1” CL for 1/2” Undersized Plywood
1/2” CD by 1” CL for 1/2” Standard Hardwood
17/32” CD by 1” CL for 1/2” Melamine
23/32” CD by 1” CL for 3/4” Undersized Plywood
3/4” CD by 1” CL for 3/4” Standard Hardwood
25/32” CD by 1” CL for 3/4” Melamine
WL-2001
1/4” Shank
WL-2002-7 1/2” Shank
By popular demand, we’ve gathered our pattern bits all
in one set. Each features a replaceable top quality shank
mounted guide bearing.
Bit #
1
2
3
4
5
WL-2030
Bit
1
2
3
4
5
6
7
8
9
6-PC pattern Bit Set
$37.50
Bit
1
2
3
4
5
6
1/2” Shank Only
Description
3/16” Edge Bead Dia. with 5/8” CL
5/16” Corner Bead Dia. with 3/4” CL
1/2” Corner Bead Dia. with 11/8” CL
$98.75
WL-2023
Woodline USA 100% lifetime guarantee
We at Woodline USA stand behind our product 100%. If, at any point,
WL-2021-6
you are unhappy with any of our router bits or shaper cutters, including any
manufacturing or performance issue, simply call 1-877-287-5017. Our courteous staff will send you a replacement as soon a possible. If our technical
staff deems it necessary, a return label will be issued for the return of the bit
and sent to you along with the replacement at no cost to you.
21
Router Bit Sets
5-PC Cove Set
Roundnose Bit Set
Add an attractive edge to
furniture, drawers, picture
frame mouldings, and cabinet doors. Try using them
where you would normally
use a roundover.
Also referred to as veining or fluting bits, roundnose bits
have numerous uses such as fluting surfaces for doors,
drawers, panels and almost all furniture projects. Ideal
for making children’s toys, sign making and moulding
projects, reeding, fluting, veining, grooving, architectural
millwork, and engraving.
WL-2015
WL-2004 1/4” Shank $48.75 WL-2015 1/2” Shank $61.25
Bit #
1
2
3
4
5
description
3/16” R
1/4” R
5/16” R
3/8” R
1/2” R
Bit #
1
2
3
4
5
description
1/4” R
3/8” R
1/2” R
5/8” R
3/4” R
Dovetail joints are versatile and mechanically strong.
Dovetail bits are perfect for making strong drawer joints,
utility and decorative boxes, fine furniture and more.
Woodline has a variety of dovetail sets to meet your
needs.
Bit #
1
2
3
4
5
6
7
8
9
10
11
12
13
WL-2017
Bit #
1
2
3
4
5
Bit #
1
2
3
4
5
6
7
8
9
10
Bit #
1
2
3
4
5
6
7
22
1/2” Shank
$23.75
$65.00
$65.00
WL-2012
WL-2050
1/2” Shank Only
$98.75
With Woodline’s shutter set, everyone can afford custom
shutters. Our instructions featured in Handyman and
American Router Magazines,
including size calculations, are
included with each shutter set and
can be found on our website.
We’ll even get you started with a
free pin and tensioner kit.
WL-2055
WL-2055
Bit #
1
2
3
4
5
WL-1710
1/4”&1/2” EXTENDED SHANK
1/4” Shank
Make true divided light doors
for fine furniture and cabinets.
Set includes matching rail &
stile and a rabbeting bit for
cutting the recess for the glass.
WL-2017
1/4” Shank
1/2” Shank
Type : Description
Dovetail Bit: 7.5° by 1/4” CD
Dovetail Bit: 9° by 5/16” CD
1-1/2” CD with 3/4” CL
Plantation Shutter Set
Woodline USA INFO
Our bits fit most popular jigs
and dovetail fixtures such as
the Incra® Jig and the Jointech® Jig. If you who need an
extended shank for the Leigh®
jig, see WL-1711.
Type : Description
Dovetail Bit: 8° by 3/8” CD on 1/4” Shank
Straight Bit: 5/16” CD by 1” CL,1/4” Shank
Straight Bit: 7/16” CD by 1” CL, 1/2” Shank
Straight Bit: 1/2” CD by 1” CL, 1/2” Shank
WL-1712
5
$73.75
$73.75
WL-2014
type : description
Straight Bit: 1/4” CD by 3/4” CL
Straight Bit: 3/8” CD by 1” CL
WL-1711
Description
3/8” CD with 1” CL
1/2” CD with 1-1/4” CL
3/4” CD with 1-1/4” CL
1” CD with 1-1/4” CL
WL-2050
Type : Description
WL-1709
WL-1710
Bit #
1
2
3
4
5
6
7
8
1/2” Shank
Type : Description
Straight Bit: 7/16” CD by 1-1/4” CL
1/2” Shank
Bit #
1
2
3
4
Divided Light Set
Dovetail Bit Sets
WL-2014
WL-2012
$75.00
WL-1711
WL-1711 With these bits you
can make sliding dovetails,
half blind dovetails, French
dovetails, etc.
The 8° dovetails are used
for through dovetails while
14° dovetails are com$56.25 monly used for half-blind
dovetails.
WL-1712
1/2” Shank
$86.25
Type : Description
Beading Bit
Bullnose Bit
Dado Bit
Rabbeting Bit
Moulding Bit
WL-2055-1
Pin & Tensioner Kit
$6.25
Pin & Tensioner accessory kit comes with 50 pins and 4
tensioning bushings. The number needed is determined
by shutter size and style. Refer to instructions on website
at www.woodline.com.
3 pc offset tongue & groove Set
Complete your cabinet-making collection with this set that
allows you to build incredibly strong face frames. The
offset feature allows increased flexibility when needed.
See complete instructions at www.woodline.com.
WL-2038
1/2” SHANK ONLY
1/4” Shank is RED
1/2” Shank is BLUE
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
$111.25
WL-2038
Router Bit Sets
3-PC Horizontal Cove Crown
Moulding Set
Save time and money and get the look you want by making your own crown moulding.
These bits are great for your
remodeling projects and
moulding for grandfather
clocks and larger fine
furniture pieces.
WL-2094
WL-2094
Bit #
1
2
3
1/2” SHANK ONLY
$73.75
Description
7/16” Cutting Length by 1-3/4” Overall Diameter
Master Molding Set
Create your own custom moulding with this collection
of beautiful profiles. Craft detailed quality mouldings to
decorate fine furniture and cabinetry as well as architectural mouldings. This set includes five beautiful moulding
profiles. With a wide selection of cutting lengths and
compatible profiles, there’s no end to the combinations
you can produce.
WL-2011
Bit #
1
2
3
4
5
Birdsmouth Set
Make 6, 8, 12, and 16-sided projects. You asked for
the birdsmouth set in a larger size
and here it is. Only one edge of the
material is cut. The interlocking
design of the joint makes the final
WL-2045
frame incredibly simple to glue up
with no shifting problems. Great for making planters,
barrels, columns, birdhouses, chest lids
and tapered legs that can be multi-faceted
or sanded to a curve. Complete instructions are available at www.woodline.com.
WL-2045
1/2” SHANK ONLY
$73.75
2 pc HANDRAIL Set
With this set you can produce
a handrail with ergonomic
arched top flowing into an
elegantly detailed base.
WL-2046
WL-2046
1/2” SHANK ONLY
$73.75
Miniature raised panel door Set
The perfect cabinet door set for 1/2” material. Produce
the size-appropriate detail needed to add a touch of
elegance to smaller projects. Make jewelry boxes,
humidors, toolboxes, dollhouses and much more with
ease. Includes the 2 pc. Ogee
profile rail & stile bits and 2”
diameter Ogee panel raiser with
undercutter.
WL-1408-1
Shank: 1/2” Diameter Only
Item #
WL-1408-1
Price
$73.75
Bit
1
2
3
4
5
6
7
8
1/2” Shank only
WL-2011
Picture Frame Set
Everything you need to produce beautiful custom frames.
Layer the profiles to create hundreds of different designs.
Picture frame
video available.
See p. A2
WL-2008
WL-2007
WL-2008
Bit #
1
2
3
4
5
6
7
8
1/4” Shank
1/2” Shank
$93.75
$93.75
Type : Description
Palace Molding Bit: 5/16” Bead Diameter and 1-3/8” CD by 1” CL
Roundover Bit: 3/8” Radius by 1-1/4” Overall CD
Rabbeting Bit: 1/2” Kerf by 11/4” CD
Roundnose Bit: 1/2” CD by 11/4” CL
Double Roman Ogee Bit: 1/4” Profile R by 1-1/2” Overall CD
Edge Beading Bit: 1/8” Radius Bead by 3/4” Overall CD
Face Molding Bit: 1-5/8” CL by 11/16” CD
Cove Bit: 3/8” R by 1-1/4” Overall CD
Table Edge Set
Use for table
edges, mouldings
small raised
WL-1466
panels, door and
drawer edges, and fine furniture.
WL-1466
Bit #
1
2
3
4
5
1/2” Shank Only
description
Elongated Cove & Bead
Elongated Wavy Edge
Elongated Double Roundover
Elongated Ogee w/Step Cove
Thumbnail w/Step Cove
Our Miniature Collection includes your
favorite profiles reduced to make them the
perfect size for work on smaller sized
projects. These bits are great for doll
houses, jewelry boxes, tool boxes,
humidors, and so much more.
8-PC Classical Set
WL-2016
Type : Description
WL-1141: 1-3/4” CL
WL-1437: 1-11/16” CL
WL-1144: 1-7/8” CL
WL-1142: 1-1/2” CL,
Three 1/4” Beads
WL-1439: 1-3/8” CL
$123.75
$111.25
$125 if purchased
separately
See profiles p. A16
Miniature moulding Collection
Profile
Ogee Profile
Add a classic touch to your
handcrafted furniture, table edges,
mouldings, drawers, picture frames,
cabinet doors, and so much more.
1/2” Shank only
WL-2000M
WL-2016
$123.75
Description
Roman Ogee Bit: 5/32” Radius Ogee with 1/2” Cutting Length
Roman Ogee Bit: 1/4” R Ogee with 3/4” CL
Double Roman Ogee Bit 5/32” Profile Radius with 1/2” CL
Double Roman Ogee Bit 1/4” Profile R with 3/4” CL
Classical Ogee Bit: 5/32” Profile R with 1/2” CL
Classical Ogee Bit: 1/4” Profile R with 3/4” CL
Ogee with Fillet Bit: 3/16” R Ogee with 1/2” CL
Classical Wavy Edge Bit: 1/4” Profile R with 7/8” CL
Bit
1
2
3
4
5
6
7
8
9
10
11
12
1/4” Shank only
WL-2000M
$73.75
Description
Cove Bit: 1/8” Radius with 35/64” Overall CD
Roundover Bit: 1/8” R with 35/64” Overall CD
Roundover Bit: 1/4” R with 13/16” Overall CD
Chamfer Bit: 45° by 25/32” Overall CD
Plunging Roundover with Bead Bit: 1/2” Overall CD
Plunging Classic Ogee Bit: 1/2” Overall CD
Roundnose Bit: 1/4” CD by 1/4” CL
Classical Ogee Bit: 1/8” Profile R by 25/32” Overall CD
Classical Wavy Edge Bit: 1/8” Profile R by 25/32” Overall CD
Ogee with Fillet Bit: 1/8” Profile R by 7/8” Overall CD
Double Roman Ogee Bit: 1/8” Profile R by 25/32” Overall CD
Roman Ogee Bit: 1/8” Profile R by 25/32” Overall Diameter
23
Straight, Spiral & Trim Bits
two flute STRAIGHT
bits
Straight Bits With Shear
The diagonally mounted flutes provide a shear finish with
spiral like performance. They work especially well for
edge joints and dadoes with difficult hardwoods.
These two flute bits are designed with a longer lasting
edge featuring solid carbide tips and anti-kickback
design. These bits will provide you with smooth cutting
performance at some of the best prices around.
Shank: 1/4”Dia. 1-1/4” Length
Part
Cutting
length
Cutter Diameter
Part
Price
WL-1001*
1/8”
3/8”
WL-1001SC*
1/8”
3/8”
3/16”
WL-1002**
1/2”
WL-1002-5.5 5.5mm (undersized plywood) 1/2”
WL-1003
1/4”
1/2”
WL-1003SC*
1/4”
1”
WL-1004
5/16”
3/4”
WL-1005
3/8”
1”
WL-1005-9.0 9mm (undersized plywood)
1”
15/32” (undersized plywood)
1”
WL-1006
WL-1007
1/2”
1”
WL-1008
9/16”
3/4”
WL-1009
5/8”
3/4”
23/32” (undersized plywood)
WL-1010
3/4”
WL-1011
3/4”
3/4”
WL-1012
1”
3/4”
* Solid Carbide Cutter **Single Flute Cutter
$12.75
15.00
8.75
8.75
7.50
17.50
8.75
8.75
10.00
10.00
10.00
10.00
11.25
12.75
12.75
15.00
WL1008
Cutter Dia.
Cut length
Price
WL-1020
15/64” (undersized
plywood)
3/4”
$8.75
WL-1021
WL-1021SF*
WL-1021-.28
WL-1019
WL-1022
1/4”
1/4”
.28” (Melamine)
5/16”
3/8”
3/4”
1”
3/4”
3/4”
1”
8.75
8.75
8.75
8.75
8.75
WL-1022-9.0
9mm (undersized
plywood)
1”
9.35
WL-1023
7/16”
1”
8.75
WL-1024
plywood)
1”
8.75
1”
1”
1-1/2”
2”
2”
2-1/2”
1”
10.00
10.00
15.00
20.00
20.00
22.50
11.85
1”
11.85
1’
1”
1-1/2”
1”
1”
13.25
13.75
13.75
15.00
15.00
WL-1025
1/2”
WL-1025-.53
.53” (Melamine)
WL-1026
1/2”
WL-1026-2-1*
1/2”
WL-1026-2-2
1/2”
WL-1026-2-2.5
1/2”
WL-1027
5/8”
WL-1028
plywood)
WL-1029
3/4”
WL-1029-.78
.78” (Melamine)
WL-1030
3/4”
WL-1031
1”
WL-1032
7/8”
**Single Flute Cutter
Straight, Shear or Spiral Which one do I need?
Part
WL-1020-1
WL-1021-1
WL-1022-1
WL-1024-1
WL-1025-1
WL-1026-1
WL-1027-1
WL-1028-1
WL-1029-1
WL-1031-1
Price
1/4”
5/16”
3/8”
1/2”
23/32”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
$10.00
10.00
10.00
11.25
13.75
13.75
CD
CL
Cutter
Diameter
15/64”
1/4”
3/8”
15/32”
1/2”
1/2”
5/8”
23/32”
3/4”
1”
Cutting
Length
Price
3/4”
3/4”
1”
3/4”
13/16”
1-1/2”
1-1/4”
1”
13/16”
1”
$10.00
10.00
10.00
10.00
11.25
16.25
12.50
12.50
13.75
15.00
WL1005-1
Plunging
STRAIGHT BITS
These Plunging Straight Bits have a center
carbide tooth on the bottom. They are
engineered to provide you with good control
throughout the cut and a smooth, flat bottom.
Plunging bits are great for stopped dadoes,
mortising, general groove cutting, and much
more.
Shank: 1/4”Dia.
1-1/4” Length
WL1025
Straight bits are a great multi-purpose bit that come in
a wide variety of sizes. If you often work with difficult
hardwoods, try a shear bit for a smoother cut. When
working in a spot where chip removal and the direction
of the chips is a concern, a solid carbide spiral is just
what you need. Single flute excels when cutting speed
is more important than finish quality.
24
Cutting
Length
Part
WL-1003-1
WL-1004-1
WL-1005-1
WL-1007-1
WL-1010-1
WL-1011-1
Cutter
Diameter
Part
WL-1033
WL-1034
WL-1035
Cutter
Diameter
3/8”
1/2”
3/4”
Cutting
Length
1”
1”
1”
Price
WL1034
$10.62
11.25
15.00
CD
Shank: 1/2”Dia.
1-1/2” Length
Part
WL-1036
WL-1037
WL-1038
WL-1038-2
CL
Cutter
Diameter
Cutting
Length
Price
3/8”
1/2”
3/4”
3/4”
1”
1-1/4”
1-1/4”
2”
$10.60
15.00
16.25
22.50
Buy the Set & Save!
WL-1021-6 Straight Bit Set (Pg. A3)
Get 6 of our most popular 1/2” shank Straight bits
packaged in a set.
WL1037
Hinge Mortising Bits
These modified straight bits are specially engineered
with wider carbide flutes to ensure a perfectly flat bottom
in even the most difficult applications and an enlarged
center relief to provide optimum chip clearance. These bits
are perfect for demanding stopped dado applications as
well as mortising.
Shank: 1/4” Dia., 1-1/4” Length
Part
WL-1410
WL-1411
Cutter Dia. Cut Length
1/2”
7/16”
1/2”
3/4”
Price
$8.75
10.00
Solid Carbide Spirals
Up or Down spiral?
down Spiral
Up Spirals pull chips toward
the shank. They are commonly
used for dadoing or mortising with
smooth flat bottoms.
Part
WL-1415
Cutter
Diameter
Cutting
Length
Price
1/2”
3/4”
$10.00
down Spiral
Down Spirals push chips
away from the shank. They are
commonly used in laminate,
veneer or inlay applications and
produce a clean finished surface.
WL-1416
Make Fast Work of Hinges!
1. Cut the Mortise.
2. Chisel corners square
as needed.
These high performance solid carbide spirals are engineered to provide you with the finest finish cuts possible.
The design allows for rapid chip removal and a chip
breaker tip for plunging capabilities.
3. Insert the
hinge.
Why are my plywood dadoes
rattling?
We all know that a 2x4 isn’t really 2” x 4”,
and plywood measures the same way. You
will need to choose bits that are undersized
to compensate for the sanding process of
plywood. The correct bit will provide a great fit
without any slop. Remember to select an oversize bit if you are using melamine. The laminate makes it thicker. Don’t apply this logic
when using MDF because MDF measures true
(i.e. ½” MDF is ½”).
Making it easy to order the right bit
All ½” shank bits are labeled in BLUE.
All ¼” bits are labeled in RED.
Follow the color-coding to ensure that you
won’t order a ½” bit for your ¼” router.
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
WL1001S
WL1002S-ES
WL1025S
WL1022SD
Part
WL-1001-S
WL-1001-SD*
WL-1002S-ES**
WL-1002-532S
WL-1002-5.5S
WL-1003-S
WL-1003-SD*
Cutter Dia.
1/8”
1/8”
3/16”
5/32”
5.5mm
1/4”
1/4”
Cut length
1/2”
1/2”
1”
3/4”
3/4”
1”
1”
Price
$15.00
15.00
18.75
17.50
17.50
17.50
17.50
Shank: 1/2” Dia. 1-1/2” Length
Part
WL-1003-S-1/2
WL-1019-S
WL-1022-S
WL-1022-SD*
WL-1025-S
WL-1025-SD*
WL-1025-S2
Cutter Dia.
1/4”
5/16”
3/8”
3/8”
1/2”
1/2”
1/2”
Cut length
1-1/4”
1-1/4”
1-1/4”
1-1/4”
1-1/4”
1-1/4”
2”
Price
$31.25
43.75
43.75
43.75
43.75
43.75
65.00
* “D” Indicates Down Spiral
** For use with Route-R-Joint (pg. A2)
NOTE: Due to the fragile nature of solid
carbide products, these solid carbide spirals are NOT warranted against breakage.
25
2-flute Flush Trim Bits
A two-flute trim bit allows quicker chip clearance for applications when speedy cutting is called for.
Part
WL-1200
WL-1201
WL-1202
WL-1203
WL-1204
Cutter
Cutting
Diameter length
3/8”
1/2”
3/8”
1”
1/2”
1/2”
1/2”
1”
1/2”
1-13/16”
Price
Part
Cutter
Diameter
WL-1201-5 3/8”
WL-1205
1/2”
WL-1206
1/2”
WL-1207
1/2”
WL-1208
1/2”
WL-1209
3/4”
Cutting
length
1”
1/2”
1”
1-1/2”
2”
2”
CL
Price
$11.25
10.60
11.80
13.75
18.75
25.00
WL1202
WL1208
Degree
WL-1215-45*
WL-1217-45
Flush
45°
Cutting
length
1/4”
1/4”
WL1215-4
Degree
Price
$22.50
22.50
WL1217-45
Flush Trim With V-Groove
This bit is specifically designed to add an attractive “V”
groove or notch to the seam where two boards meet
while making the flush cut.
Part
Price
CD
V-Notch
$16.25
Shank: 1/2” dia., 1¼” Length
Cutter V-Notch Cutting
Diameter Diameter length
WL-1296
1/2”
5/8”
1”
Part
CL
Price
$16.25
WL1194-1
Price
$16.25
16.25
18.75
25.00
Part
Cutter V-Notch Cutting
Diameter Diameter length
WL-1295
1/2”
5/8”
1”
Price
$13.75
15.00
15.00
20.00
Shank: 1/2” dia., 1½” Length
Cutting
length
1-3/16”
1-3/16”
1-1/2”
2”
Price
Shank: 1/4” Dia., 1¼” Length
Cutter
Diameter
WL-1195
1/2”
WL-1195-1*
1/2”
WL-1212-1
1/2”
WL-1208-1
1/2”
CL
$18.75
18.75
18.75
18.75
18.75
22.50
*4 Flutes with Shear
These bits have carbide mounted at an angle for a shear
cut to create a smoother surface than a standard twoflute with enhanced chip clearance. Spiral-like performance at a lower price
Part
Cutting
length
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
Shank: 1/2” Dia., 1½” Length
Flush Trim Bits With Shear
Part
Cutter Dia. Cut length
WL-1203-1
1/2”
1”
WL-1194
1/2”
1-3/16”
WL-1194-1*
1/2”
1-3/16”
WL-1204-1
1/2”
1-3/16”
Degree
WL-1215
Flush
WL-1216
22°
WL-1217
45°
WL-1218
7°
WL-1219
15°
WL-1215-4*
Flush
*4 Flutes with Shear
Part
Put a flush or beveled edge on laminates. Engineered
with a thin trimmer head combined with 3 or 4 flutes
and precision bearings, reducing chip out with fragile
laminates.
CD
$10.00
10.00
10.00
11.25
15.00
Fluted Laminate Trimmers
WL1195
WL-1296
Cutting
Profile
YES,
they’re carbide!
WL1296
* Down Shear
3-Flute Flush Trim Bits
Three-Flute Flush Trim Bits are designed to deliver the
highest performance cut leaving a smooth finish and
eliminating chip out. With premium enclosed ball bearing
guides, these bits will meet your trimming needs.
Shank 1/4” Dia., 1-1/4” Length
Part
WL-1210
Cutter
Diameter
1/2”
Cutting
length
1”
CD
Price
Plunging Panel Bits
Cut openings for windows, doors, sinks,
etc. The point plunges through your covering material while the collar rides against
a stud, electrical box, etc. to guide the flush
trim flute to produce a matching opening.
$12.50
Part
Shank : 1/2” Dia., 1-1/2” Length
Cutter
Diameter
WL-1211
1/2”
WL-1212
1/2”
WL-1212-3*
1/2”
Part
* WL-1212-3 with shear
26
Cutting
length
1”
1-1/2”
2”
CL
WL-1191-1
Cutter
Diameter
1/2”
Cutting
Length
2”
Price
Flush
CL
3/4”
$11.25
Price
$12.50
18.75
22.50
Part
WL1210
WL-1191
Cutter
Diameter
1/2”
Cutting
Length
2”
Price
$12.50
WL1191
Pilot
Solid Carbide
Length
Laminate Trimmers
The self piloting tips, high chip clearance,
and ease of use provide a quick and
clean solution for your general
laminate trimming needs.
CL
The shank-mounted flush guide bearing provides ideal
visibility, and premium carbide flutes insure maximum
performance for template guided routering.
WL-1213
Shank: 1/4” Dia.
Cutting Shank
Pilot
Part
Degree
Length Length Length
WL-1213
Flush
1/4”
1-1/4” 2-1/64”
WL-1213-1* Flush
5/16” 1-3/4” 7/32”
WL-1214
7°
1/4"
1-1/4” 2-1/64”
Pattern Bits With ShankMounted Bearing
Price
Part
$8.75
15.00
8.75
WL-1400
WL-1401
WL-1402
* Use WL-1213-1 to rabbet cabinet door rail &
stile frames for insertion of glass panels.
Part
These bits are designed specifically for the finishing of
rough stock and the leveling of uneven material. Perfect
for large dadoes or tenon cutting in applications of
heavy-duty shelving and furniture construction. Produces
a clean smooth, flat bottom with true sides.
Part
WL-1390
Cutter
Diameter
3/4”
Cutting
length
3/8”
CD
WL-1405
WL-1405-2
WL-1405-3
WL-1406
WL-1406-2
WL-1407*
Cutter
Diameter
WL-1391
3/4”
WL-1392
1”
WL-1393
1-1/4”
WL-1394
1-1/2”
WL-1394-1
2”
WL-1394-2* 1-3/4”
Cutter
Diameter
3/4”
3/4”
3/4”
1-1/8”
1-1/8”
3/4”
Get 6 of our most popular pattern bits
packaged in a set.
$16.25
18.75
20.00
21.25
35.00
45.00
WL-1392
As indicated by the name, these
bits are perfect for creating the soft
bottom edges for bowls and pockets
in serving trays while having the
diameters necessary to creating
the wide edge flutes for cutting
boards. Easily make your own
drink coasters, plates, and many
other specialty craft
items with one bit.
WL-1406
Cut Dia
Radius
Cut
Length
Price
7/16”
3/4”
1/8”
1/4”
1/2”
5/8”
$17.50
20.00
R
WL-1385
3/4”
WL-1386
1-1/4”
WL-1386B* 1-1/4”
1/4”
1/4”
1/4”
Cut
Length
Price
5/8”
5/8”
5/8”
$21.25
25.00
31.25
Pattern bits are commonly used with
handheld routers to allow better visibility of
the template while cutting. When selecting
a pattern bit, be sure to keep in mind the
complexities of the pattern and the tightest
radius in the pattern. Always use the largest diameter bit that is compatible with the
pattern for the best finish quality and the
greatest ease of use. Larger diameter bits
also allow for larger bearings which last
longer in heavy use applications. Always
remember to check the bit clearance below
your work so that you don’t accidentally
cut into your workbench or other support
structure.
These versatile bits are designed to plow and clean out
dadoes with a true flat bottom and clean edges. The
shank mounted bearing can ride against a bar clamp or
other guide to allow quick straight cutting every time.
WL-1386
Cut Dia Radius
WL-1400
Dado Cleaners
Part
WL1407
PATTERN BIT SELECTION
WL-1390
Price
Bowl & Tray Bits
WL-1380
WL-1381
Price
$21.25
23.75
28.75
22.50
35.00
35.00
Buy the Set & Save!
*WL-1394-2 has 5° ease into 1/8” radius for no-ridge results between passes.
Part
Cutting
Length
1”
1-9/16”
2”
1”
2”
2”
WL-2032 Pattern Bit Set (Pg. A3)
$16.25
Cutting
length
1/2”
3/8”
5/8”
5/8”
5/8”
5/8”
Price
$17.50
17.50
17.50
*Features dual bearings (top & bottom)
CL
Price
Shank: 1/2” Dia., 1 -1/4” Length
Part
Cutting
Length
1”
3/4”
3/4”
WL-1214
Dado and Planer Bits
Cutter
Diameter
1/2”
5/8”
3/4”
* Includes shank-mounted bearing for templates
WL-1386-B
Cutter Cutting
Diameter Length
WL-1007-DS 1/2”
1/8”
WL-1007-D
1/2”
7/16”
WL-1009-D
5/8”
7/16”
WL-1011-D
3/4”
7/16”
Part
Price
$17.50
17.50
18.75
20.00
WL-1007-D
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
27
Edge Treatment & Plunging Bits
Roundover Bits
Beading Bits
Shank: 1/4” Dia., 1 -1/4” Length
Woodline’s roundovers create perfectly flush decorative
edges perfect for drawer fronts, cabinet edges and small
finish mouldings. Our precision ground carbide will
provide smooth quarter round edges guaranteed for a
lifetime.
Part
Radius
WL-1040
WL-1041
WL-1042
WL-1043
WL-1044
WL-1045
WL-1046
1/16”
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
Cutting
Length
1/2”
5/16”
7/16”
1/2”
1/2”
5/8”
3/4”
Price
$13.75
13.75
13.75
13.75
15.00
17.50
20.00
Part
Part
Radius
WL-1049
WL-1042-5
WL-1050
WL-1044-5
WL-1051
WL-1052
WL-1053
WL-1054
WL-1055
WL-1056
WL-1057
WL-1058
WL-1059
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
7/8”
1”
1-1/8”
1-1/4”
1-1/2”
WL-1046/WL1052
Cutting Profile
R
CL
WL-1052
Price
$13.75
13.75
13.75
13.75
15.00
17.50
20.00
WL-1076/WL1083
Cutting Profile
Part
Radius
WL-1080
WL-1081
WL-1082
WL-1083
WL-1084
WL-1085
WL-1086
WL-1087
WL-1088
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/8”
1-1/4”
Cutting
Length
1/2”
1/2”
5/8”
3/4”
7/8”
1”
1-1/4”
1-1/2”
1-5/8”
Price
R
CL
$13.75
15.00
16.25
18.75
22.50
25.00
37.50
43.75
45.00
WL-1083
Replacement Bearing - WL83019 3/16”ID, 3/8” OD
Plunging Roundover Bits
Replacement Bearing - WL-83022 3/16” ID, 1/2” OD
Double Roundovers With
Center Guide Bearing
Center guide bearing allows you to round over both sides
of material in one pass. The eased edge is perfect for
stair treads, table edges, shelves, children’s toys, etc.
These Roundover bits have been specially manufactured
with an extended cutting length from the end of the
quarter radius providing a 3/8” wide cutting edge at the
end. This configuration facilitates plunging into or even
through the face of material while creating an attractive
roundover profile.
Part
Cutting
Opening
Price
Length
WL-1120* 3/16”
21/32-1-3/8”
11/16”-1-15/32” $45.00
WL-1120-1 1/4”
1-3/8”
7/8”
40.00
WL-1120-2 3/8”
1-5/8”
1”
45.00
WL-1120-3 1/2”
1-13/16”
1-3/8”
47.50
Note: *WL-1120 has an adjustable opening and cutting length
with included shims.
Part
1/16”
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
Cutting
Length
1/2”
5/16”
7/16”
1/2”
1/2”
5/8”
3/4”
Price
$13.75
15.00
15.00
15.00
13.00
16.25
22.50
25.00
35.00
37.50
43.75
45.00
60.00
Radius
WL-1070
WL-1071
WL-1072
WL-1073
WL-1074
WL-1075
WL-1076
Cutting
Length
3/8”
3/8”
1/2”
1/2”
5/8”
3/4”
7/8”
1”
1-1/8”
1-1/4”
1-1/2”
1-5/8”
1-5/8”
This modification of the quarter roundover with a smaller
bearing provides a small step on the roundover producing a precise edge perfect for drawer fronts, cabinet
edges, and small finish moldings often used by the
furniture enthusiast.
Radius
WL-1043P
WL-1045P
Radius
Dia.
1/4”
3/8”
3/8”
3/8”
Cutting
length
3/4”
7/8”
3/8”
Price
$18.75
20.00
R
CL
Part
Radius Diameter
WL-1050P
WL-1051P
WL-1052P
WL-1053P
1/4”
3/8”
1/2”
5/8”
3/8”
3/8”
3/8”
3/8”
Cutting
Length
3/4”
7/8”
15/16”
1”
Price
WL1045P
$18.75
20.00
28.75
30.00
3/8”
R
CL
R
CL
WL-1120
WL-1052P Cutting Provile
WL-1120-2
28
WL-1051P
Bullnose Bits
Easily produce beautiful staircase
moulding, small furniture moulding, picture frames, table edges,
countertops, and much more.
Bullnose bits come with a fully
enclosed guide bearing to allow
pattern cutting.
Fingernail Bits
Cove Bits
Add an attractive edge to furniture,
drawers, picture frame mouldings,
and cabinet doors. Try using them
where you would ordinarily use a
roundover.
Fingernail bits, also known as
half radius bullnose bits, are
used often to soften hard edges
on tables, countertops, stairs,
and in almost all applications
were you could use a full radius CL
Bullnose. These bits produce a
Shank: 1/4” Dia., 1-1/4” Length very nice edge when the bead
Bead Cutting
opening is smaller than the
Part
Price
Opening Length
material thickness.
WL-1100
WL-1101
WL-1102
WL-1103
WL-1104
1/4”
3/8”
1/2”
5/8”
3/4”
1/2”
3/4”
7/8”
1”
1-1/8”
$17.50
21.25
22.50
23.75
28.75
Part
WL-1110
WL-1111
WL-1112
WL-1113
WL-1114
WL-1115
WL-1116
WL-1117
WL-1118
Bead
Opening
1/4”
3/8”
1/2”
5/8”
3/4”
1”
1-1/8”
1-1/4”
1-1/2”
Cutting
Length
5/8”
13/16”
3/4”
7/8”
1-3/16”
1-3/8”
1-1/2””
1-11/16”
1-7/8”
Price
$17.50
21.25
22.50
23.75
28.75
33.75
35.00
37.50
42.50
Bead
Opening
CL
WL-1112
Cutting Profile
WL-1112
WOODLINE NOTE
Create other unique finishes
by selecting a Bullnose that is
either smaller or larger than
your material.
Bead Cutting
Opening Length
WL-1090 3/8”
5/8”
WL-1091 1/2”
3/4”
WL-1092 3/4”
1’
Part
Price
WL-1096
$15.00
17.50
21.25
WL-1095
WL-1096
WL-1097
WL-1098
Bead
Opening
3/8”
1/2”
3/4”
1”
Cutting
Length
5/8”
13/16”
1”
1-3/8”
WL-1159
WL-1160
WL-1161
WL-1162
WL-1163
1/8”
3/16”
1/4”
3/8”
1/2”
Part
WL-1169
WL-1170
WL-1171
WL-1172
WL-1173
WL-1174
Price
$15.00
17.50
21.25
23.75
Radius
Cutting
:ength
3/8”
5/16”
1/2”
1/2”
5/8”
Price
$15.00
15.00
16.25
18.75
20.00
Part
Part
WL-1096
Cutting Profile
Radius
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”
Cutting
Length
1/2”
1/2”
1/2”
5/8”
3/4”
7/8”
Price
$13.75
16.25
18.75
20.00
27.50
30.00
R
Stepped Cove
Bits
CL
These Cove Bits have been
engineered with a step on both
ends of the cove radius producing a unique profile for furniture
and cabinet edges. Use instead
of a standard cove bit for a
more pronounced eye-catching
profile.
WL-1163
CL
Cutter Cut
Part
Rad
Price
Dia length
WL-1161-1 1/4” 1-1/8” 9/16” $20.00
WL-1162-1 3/8” 1-3/8” 5/8” 21.25
WL-1172-1
WL-1163/WL-1172
Cutting Profile
Part
WL-1101/WL-1111 Profile Options
Rad Cutter
Dia
WL-1170-1 1/4” 1-1/8”
WL-1171-1 3/8” 1-3/8”
WL-1172-1 1/2” 1-5/8”
Cut
length
9/16”
5/8”
13/16”
Price
$20.00
21.25
25.00
YES,
they’re carbide!
100% Lifetime Guarantee
We at Stockroom Supply Canada stand behind our product 100%. If, at any
point, you are unhappy with any of Woodline’s router bits or shaper cutters,
including any manufacturing or performance issue, simply call 1-877-287-5017.
Our courteous staff will send you a replacement as soon a possible. If
our technical staff deems it necessary, a return label will be issued for
the return of the bit and sent to you along with the replacement at no
cost to you.
WL-1172
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
29
Roundnose/core box bits
Fluting Bits
These bits are also commonly referred to as veining or
fluting bits and have numerous uses such as reeding,
fluting, veining, grooving, architectural millwork,
engraving, fluting surfaces for doors, drawers, panels,
making children’s toys, sign making and moulding for
almost all of your furniture projects. Cutter radius is 1/2
of cutter diameter.
CD
For fluting applications with a hand router.
Features a horizontal cutting surface
(perpendicular to the shank) with top and
bottom high performance guide bearings.
May be used as a pattern cutting bit.
R
CL
Cutter Cutting
Price
diameter length
WL-1370*
1/8”
5/16”
$12.50
WL-1371
1/4”
11/32”
23.75
WL-1371-1
3/8”
7/16”
12.50
WL-1372-1 5/8”
5/8”
13.75
CD
WL-1372
1/2”
9/16”
13.75
WL-1487** 1/2”
1/2”
16.25
WL-1373
3/4”
7/16”
17.50
*WL-1370 Is a solid carbide bit
**WL-1487 has a shank-mounted bearing CL
Bead
Diameter
1/4”
3/8”
1/2”
Part
WL-1470
WL-1471
WL-1472
Part
WL-1372
Bead
Diameter
1/2”
3/4”
1”
1-1/2”
Part
WL-1474
WL-1475
WL-1476
WL-1477
R
WL-1376
Create beautiful 2-partial
beads with a selection of radii.
With multiple passes, you can
create fantastic full beads
without the material thickness
limitations of standard beading bits.
WL-1372/WL1376
Cutting Profile
To do template cutting, try the WL-1487. With its flush shank-mounted bearing, this roundnose bit can be used to create false panels or even create
fluted columns.
WOODLINE NOTE
Shank 1/2” Dia. Only
Diameter
of Detail
WL-1480
3-Full Flute
1/4”
WL-1481
3-Full Bead
1/4”
WL-1480A Both Bits above
1/4”
WL-1490
2-Full Bead &
1/4”
2-Partial Bead
WL-1369
2-Partial Bead
3/16”
WL-1142
3-Full Bead &
1/4”
2-Partial Bead
Bit
Dia.
3/4”
3/4”
3/4”
1”
Shank
Length
1-1/2”
1-1/2”
1-1/2”
1-3/8”
$32.50
32.50
50.00
40.00
1/2”
1-1/2”
1-1/8”
7/8”
1”
1-1/2”
27.50
41.25
WL-1480
and WL-1481
Cutting Profiles
WL-1471
Cutting
Profile
Perfect for lettering and sign
making, turning legs, enhancing
cabinetry design, and
general surface design.
Shank:1/4” Dia.,
1-1/4” Length
Radius
1/8”
1/4”
3/8”
Cutter
Price
dia
1/4” $15.00
1/2”
15.00
3/4” 20.00
Shank: 1/2” Dia.,
1-1/2” Length
CD
Cutting
length
1-1/8”
1-1/8”
1-1/8”
3/4”
WL-1471
$26.25
28.25
32.50
37.50
WL-1317-1
WL-1317
WL-1318
Classic edge treatment that creates multiple beads or flutes in a
single pass, decorative edge and face detail in crown molding, furniture, picture frames, and many common household trims.
Type
Bead
Diameter
Price
Part
Multiple Fluting & Beading Bits
Part
WL-1476
Horizontal
Beading Bits/
Point Cutting
Roundovers
NOTE
Horizontal Beading
Bits/Point Cutting
Roundovers
Price
$11.25
15.00
16.25
18.75
18.75
27.50
$21.25
23.75
26.25
Shank: 1/2” dia., 1-1/2” Length
Cutter Cutting
Part
diameter length
WL-1375
1/4”
5/8”
WL-1375-1 3/8”
1”
WL-1376
1/2”
1-1/4”
WL-1377
3/4”
1-1/4”
WL-1378
1”
1-1/4”
WL-1378-1 1-1/2”
3/4”
Price
Price
Part
CL
WL-1490
Radius
WL-1318-1 5/8”
Cutter
Price
dia
1-5/16” $21.25
WL-1318 Cutting
Profile
Diameter of
Detail
WL-1480A
includes both
bits shown!
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
30
NOTE
Multiple Fluting &
Beading Bits
For a unique finish, try
combining both the multi flute
and the multi bead finish in
an alternating pattern.
WL-1318
WL-1481
WL-1480
WL-1318-1
Corner & Edge Beading Bits
Chamfer Bits
While these bits were initially designed for mitering
frames, they are commonly used for beveling and
simple decorative edges.
Produce a delicate attractive edge in a variety of sizes. Great for jewelry boxes, classic
moulding, fine furniture, etc.
WL-1462 Cutting Profile
WL-1461
Shank:1/4” dia., 1-1/4” Length
Part
Type
WL-1460 1-Full Bead
WL-1461 1-Full Bead
WL-1462 1-Full Bead
WL-1463 1-Full Bead &
1-Partial Bead
WL-1182/WL-1189
Cutting Profiles
WL-1464
Part
Bead Bead Cutting Cutting
Price
Dia Radius length Dia
3/16” 3/32” 5/8” 11/16” $18.75
5/16” 5/32” 11/16” 13/16” 20.00
1/4”
1/8”
5/8”
3/4” 20.00
5/16” 5/32” 13/16” 3/4” 20.00
WL-1180
WL-1181
WL-1179
WL-1182
WL-1187-1
WL-1183
Type
1-Partial Bead
1-Partial Bead
Bead Bead Cutting Cutting
Price
Dia Radius length Dia
5/16” 5/32” 7/8” 13/16” $20.00
1/2”
1/4”
1-1/8”
1”
26.25
“V” Groove Bits
Useful for sign carving, lettering,
grooving, and detailing projects.
These plunging cutters come in both
60° and 90° angles and a variety of
diameters.
WL-1316
WL-1319
WL-1319 -1*
WL-1320
WL-1321
WL-1322
WL-1485**
Angle
60°
60°
60°
90°
90°
90°
90°
cutter Cutting Price
dia. length
1/2”
11/16” $13.75
3/4” 13/16” 18.75
5/8”
1/2”
22.50
1/4”
5/16” 10.60
3/8”
1/2”
10.60
1/2”
1/2”
11.25
1/2”
1/2”
27.50
WL-1316
Shank: 1/2” dia., 1-1/2” Length
WL-1325
WL-1326
WL-1327
WL-1328-1
WL-1328
Angle
90°
90°
90°
90°
90°
Cutting
Length
1/2”
1/2”
7/8”
1/2”
7/8”
5/8”
Sides of
Frame
12
NA
16
4
8
4
Price
$16.25
16.25
18.75
17.50
17.50
18.75
Part
WL-1185
WL-1186
WL-1187
WL-1188
WL-1189
WL-1190
Cutter
Dia
7/8”
1”
1-1/4”
1-1/2”
1-5/8”
2-9/16”
Cutting
Angle
11-1/4°
15°
22-1/2°
30°
45°
45°
Cutting
Length
7/8”
7/8”
7/8”
7/8”
5/8”
1-1/4”
Sides of
Frame
16
12
8
6
4
4
Price
$18.75
20.00
21.25
22.50
23.75
36.25
Cutter Cutting
Price
Dia. Length
5/8”
1/2” $15.00
3/4”
5/8”
17.50
1”
3/4” 22.50
1-1/4”
1”
25.00
1-1/2” 1-1/4” 32.50
The angle of the chamfer defines
the number of sides in the frame, for
instance a 45° chamfer will create a
square or four sided frame while a 15°
chamfer is used to create a 12 sided
frame.
WL-1185
Plunging Ball Bits
*WL 1319-1 has 3 flutes
** WL-1485 features a shank
mounted bearing for template use.
Part
Cutting
Angle
15°
25°
11-1/4°
45°
22-1/2°
45°
NOTE
chamfer Bits
Part
Cutter
Dia
3/4”
3/4”
7/8”
1-1/8”
1-1/4”
1-5/8”
Part
WL-1182
Plunging ball cutters allow you to create
flutes by allowing you to plunge from an
edge or into the face of the material. Larger
diameter plunging ball cutters work very well
to create simple unique drawer pulls. These
can also be used to create captive rod supports for drawer slides and closet organization systems.
Shank: 1/2” Dia.only, 1-1/2”Length
Part
WL-1326
Radius
WL-1379-1
WL-1379-2
WL-1379-3
WL-1379-4
3/16”
1/4”
3/8”
1/2”
NOTE
“V” Groove Bits
The bit angle is measured from the cutting surface to
the point plane in line with the shank. A 90° bit consists
of two 45° cutting surfaces while a 60° consists of two
30° cutting surfaces.
WL-1379-1
Cutting Profiles
Cutter
Price
diameter
3/8”
$16.25
1/2”
17.50
3/4”
20.00
1”
26.25
WL-1379-3
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
31
Classical Ogee
Edge detail Bits
Useful for table edges, mouldings, drawers, picture
frames, cabinet doors, and much more.
Ogee
Part
Radius
WL-1250
WL-1251
5/32”
1/4”
Part
Radius
WL-1261
3/16”
Cutter
Dia
1-1/4”
Cutting
Length
5/8” Part
Radius
WL-1261-1
WL-1262
3/16”
1/4”
Cutting
Length
5/8”
7/8”
$23.75
WL1262
Price
$23.75
$27.50
WL-1262
Cutting Profile
Roman Ogee
Part
Radius
WL-1230
WL-1231
5/32”
1/4”
Cutter Cutting
diameter length
1”
1/2”
1-3/8”
3/4”
Cutting
Length
1/2”
11/16”
Price
$25.00
$27.50
Price
Cutter
Dia
1-1/4”
1-5/8”
Cutter
Dia
1-1/8”
1-1/2”
Shank: 1/2”Dia., 1-1/2” Length
Part
Radius
WL-1252
WL-1253
5/32”
1/4”
Cutter
dia
1-1/8”
1-1/2”
Cutting
length
1/2”
11/16”
WL1253
Price
$25.00
27.50
French Provincial
Cove & Bead
Price
CD
$20.00
$22.50
CL
Shank: 1/2” Dia., 1-1/2”Length
Part
Radius
WL-1235
WL-1236
5/32”
1/4”
Cutter Cutting
diameter length
1”
1/2”
1-3/8”
3/4”
Price
$20.00
$22.50
Part
Radius
WL-1260
3/16”
Cutter
Dia
1-3/8”
Cutting
Length
9/16”
WL-1268
Radius
WL-1265
3/16”
Cutter
Dia
1-3/8”
Cutting
Length
9/16”
Cove
Radius
1/8”
Bead
Radius
3/8”
Cutter
Dia
1-1/2”
Cutting
Length
5/8”
Price
$27.50
Price
Part
$26.25
WL-1254
WL-1269
Part
Part
Ogee with Fillet
WL-1254
WL-1268
WL1235
Cove
Radius
3/16”
1/8”
Bead
Radius
3/16”
3/8”
Cutter
Dia
1-1/8”
1-1/2”
Cutting
Length
1/2”
5/8”
Price
$22.50
$27.50
Price
$26.25
WL1260
Double Roman Ogee
Part
WL-1240
WL-1241
Cutter Cutting
Radius
Diameter Length
5/32”
1-1/8”
1/2”
1/4”
1-1/2”
3/4”
Classical Wavy Edge
Price
Cutting
Depth
$26.25
$28.25
Cutting
Length
Shank:1/2” Dia., 1-1/2” Length
Part
Radius
WL-1245
WL-1246
5/32”
1/4”
Cutter Cutting
Diameter Length
1-1/8”
1/2”
1-1/2”
3/4”
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
32
Price
WL-1241
$26.25
$28.25
WL-1255
Shank: 1/2” Dia. only, 1-1/2” Length
Part
WL-1238
WL-1255
Cutting
Depth
1/2”
9/16”
Cutter
Dia
1-1/2”
1-7/8”
Radius
5/32”
5/32”
Cutting
length
3/4”
7/8”
Price
$28.75
$30.00
Classic Double
Roundover
plunging Decorative Bits
Plunging decorative edges work well for creating decorative designs in the face of drawers, doors, jewelry boxes,
cabinetry, frames, and adding detail to your fine furniture
projects. Make great mouldings for your projects or small
false raised panels doors in MDF applications.
Part
Radius
WL-1258
WL-1259
5/32”
1/4”
Cutter Cutting
diameter length
1-1/8”
1/2”
1-1/2”
11/16”
WL1259
Price
Plunging Ogee
Part
$26.25
$28.75
Cutter Cutting
Price
Dia Length
3/4”
7/16” $16.25
1-1/4”
1/2” $21.25
Radius
WL-1383 1/8”
WL-1384 3/16”
Triple Roundover
Part
Cutter Cutting
Price
Dia Length
3/4”
7/16” $16.25
1-1/4”
1/2” $21.25
Radius
WL-1395 1/8””
WL-1396 3/16”
Shank: 1/4” dia. only, 1¼” Length
Shank: 1/2” Dia only, 1-1/2” Length
Part
WL-1256
Radius
3/16”
Cutting
length
3/4”
Roundover
with Bottom Bead
WL1256
Cutter
diameter
1-5/8”
WL1396
Part
Price
$30.00
Cutter Cutting
Price
Dia Length
5/8”
1/2” $17.50
7/8”
5/8” $18.75
1-3/16” 3/4” $22.50
Radius
WL-1270
WL-1271
WL-1272
3/16”
5/16”
7/16”
WL1270
Classic Cove & BeaD
Classic Beading
Part
WL-1266 5/64”
WL-1267-1 5/32”
WL1263
WL1486
Radius
WL-1263
WL-1486*
1/4”
1-1/4”
Cutter
Diameter
1-1/8”
1-3/8”
Cutting
Length
5/8”
5/8”
Shank
Length
1-1/2”
1-1/8”
Price
$21.25
$37.50
Part
Radius
WL-1267
5/32”
WL1266
Plunging bits are commonly used alone or in combination to produce faux raised panel doors. By
plunging into MDF or plywood at an equal distance
from the edge of a flat door, a profile is created to
resemble a rail and stile with a raised panel insert.
Use this technique to give personality to all types of
utility cabinets or painted doors in a kitchen or bath.
Cutter Cutting
Price
Dia Length
3/4”
7/16” $18.75
Double Roman ogee
*WL-1486 features a sloping (varying radius) bead and a
shank-mounted flush bearing for template guided cutting.
Tech
Tip PLUNGING BITS
Cutter Cutting
Price
dia
length
1/2”
3/8” $18.75
3/4”
7/16” $18.75
Shank:1/2” Dia., 1-1/2” Length
Shank: 1/2” Dia.
Part
Radius
Shank: 1/2” dia., 1½” Length
Part
WL-1273
Radius
1/4”
WL1273
Cutter
Diameter
1-5/16”
Cutting
Length
5/8”
Price
$27.50
33
Edge detail Bits
Great for table edges, mouldings, small raised panels, door and
drawer edges, and fine furniture. Layer different profiles with multiple
passes.
WL-1275
Part
WL-1274
WL-1274-1
WL-1275
WL-1276
WL-1436
WL-1438
WL-1445
WL-1446
WL-1447
WL-1448
WL-1449
WL-1455
WL-1466-1
WL-1466-2
WL-1466-3
WL-1466-4
WL-1466-5
Profile
Ogee w/Stepped Cove
Ogee w/Stepped Cove
Dbl Sided Classic Ogee
Dbl Sided Triple Rndover
Thumbnail w/ Bead
Elong Ogee w/Step Bead
Thumbnail
Elongated Roman Ogee
Shallow Ogee w/Step Bead
Dbl Rom Ogee w/Step Cove
Classic Ogee
Oval Bead w/Fillet
Elong Cove & Bead
Elong Wavy Edge
Elong Dbl Roundover
Elong Ogee w/Step Cove
Thumbnail w/Step Cove
Reveal
1-5/16”
3/4”
5/16”
1/2”
1”
1”
1-1/8”
7/8”
3/4”
3/4”
3/4”
15/32”
3/4”
3/4”
3/4”
3/4”
7/8”
Dia.
3”
2”
1-1/8”
1-1/2”
2-1/2”
2-1/2”
2-3/4”
2-1/4”
2”
2”
2”
1-7/16”
2”
2”
2”
2”
2-1/4”
Length
1-5/8”
7/8”
1”
1-1/4”
3/4”
13/16”
7/8”
3/4”
1”
15/16”
1-1/16”
1”
1/2”
11/16”
1/2”
5/8”
11/16”
Price
$55.00
41.25
35.00
35.00
43.75
45.00
47.50
40.00
42.50
40.00
40.00
37.25
31.25
31.25
31.25
31.25
31.25
WL-1274
WL-1276
WL-1455
WL-1274-1
WL-1436
WL-1438
WL-1445
WL-1446
WL-1447
WL-1448
WL-1449
WL-1466-1
WL-1466-2
WL-1466-3
WL-1466-4
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
34
Buy the Set & Save!
WL-1466 Table Edge Set
Get 5 of our most popular table edges
packaged in a set. (See pg. A5)
WL-1466-5
Moulding Bits
Mouldings
With a wide selection of cutting lengths and compatible
profiles, you can use multiple
bits to create custom mouldings. Handrail
WL-1445-1
Cutting Profile
Shank: 1/2” dia. only, 1½” Length
Part
WL-1140
WL-1141
WL-1142
WL-1143
WL-1144
WL-1439
WL-1439-1
WL-1440
WL-1440-1
WL-1441
WL-1441-1
WL-1442
WL-1442-1
WL-1443*
WL-1444*
WL-1445-1
WL-1458
WL-1458-1
WL-1459
Cutter
Dia.
1-3/8”
1-3/8”
7/8”
1-17/64”
1-1/2”
1”
3/4”
1”
7/8”
1-1/16”
7/8”
1-3/4”
1-1/2”
1-1/4”
1-1/4”
1-3/8”
2”
1-1/2”
1-3/4”
Cutting
Length
1-1/2”
1-3/4”
1-1/2”
1-3/8”
1-15/16”
1-3/8”
1-1/16”
1-3/8”
1”
1-5/8”
1”
1-1/8”
7/8”
3/4”
7/8”
1-1/2”
1-5/8”
1-5/16”
1-3/8”
Price
$41.25
52.50
41.25
41.25
52.50
38.75
32.50
38.75
32.50
38.75
32.50
38.75
32.50
32.50
32.50
43.75
50.00
37.50
40.00
WL-1445-1
WL-1140
WL-1141
WL-1144
WL-1143
WL-1142
* WL-1443 and WL-1444 do not have
bearing guides
Classic Astragal
Astragal mouldings are common in older homes and
classic furniture, including window sills, table edges,
counters, picture frames and chair rails.
WL-1439
WL-1440
Part
WL-1426-1
WL-1426
WL-1427
WL-1428
Radius
1/4”
1/4”
5/16”
3/8”
Cutter
Dia
1”
1-1/8”
1-1/4”
1-3/8”
Cutting
Length
3/4”
1”
1-3/16”
1-1/2”
Price
$35.00
37.50
38.70
46.25
WL-1441
WL-1443
WL-1427
Cutting Profile
WL-1442-1
WL-1427
Classic Palace
This classic molding profile has a stepped cove
and full radius bead.
Bead
Cutter
Diameter Diameter
WL-1226
1/4”
1-1/8”
WL-1227
5/16”
1-3/8”
WL-1228
3/8”
1-5/8”
WL-1228-1 7/16”
1-5/8”
Part
Cutting
Length
3/4”
1”
1-5/16”
1-5/16”
Price
WL-1444
$23.75
28.75
31.25
33.75
WL-1227
WL-1459
WL-1458-1
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
35
Moulding Bits
Multi-Profile Cutter
With this single bit you can produce an almost unlimited array of beautiful large and small mouldings quickly and easily.
Cutter Cutting
Diameter Length
WL-1422 2-1/4” 1-15/16”
Part
Cutting
Depth
7/8”
Price
$56.25
Face Moulding
Face moulding bits feature a symmetrical shape and serve as great
universal moulding bits. Easily
produce chair rails, crown moulding, base cap and picture frame
mouldings with a single pass.
Fully-enclosed ball bearing guides
make it easy to combine this profile with other moulding cutters.
Part
WL-1457-1
WOODLINE NOTE
Multi-profile Cutter
CD
11/16”
CL
7/8”
Price
$32.50
Shank:1/2” Dia. 1-1/2” Length
Create more than 40 different profiles simply by adjusting the height
of the bit, the depth of the fence
on the router table and flipping or
rotating stock.
WL-1422
Part
CD
CL
Price
WL-1457
7/8”
1-7/8”
$42.50
WL-1457
Brick Moulding
Useful for many architectural and furniture projects
Part
WL-1467
Cutter Dia
1”
Cutting Length
2-5/32”
Price
$40.00
WL-1222 Two of the many Cutting Profiles
Crown Moulding
WL-1467
Save time and money and get
the look you want by making
your own crown moulding.
These bits are great for all
your remodeling projects and
moulding for grandfather clocks
or larger fine furniture pieces.
(Use multiple passes in hardwoods for optimum results.)
Case/Base Moulding
Case moulding bits deliver the quality smooth finish
needed to produce beautiful casings and base
moulding for architectural and furniture projects.
(Use multiple passes in hard woods for optimum
results.)
Part
WL-1456
WL-1456-1
WL-1456-2
WL-1456-3
Cutter
Diameter
1-3/8”
1-1/2”
1-1/4”
1-1/4”
WL-1456-1
36
Cutting
Length
1-13/16”
2-1/4”
2-1/4”
2-1/4”
Price
$40.00
47.50
47.50
47.50
WL-1456-2
Profile
Cutter Carbide Moulding
Price
style
Diameter Height
Height
WL-1433
Ranch
1-3/8”
1-5/8”
2-1/4” $47.50
WL-1434
Colonial
1-3/8”
1-7/8”
2-1/4”
47.50
WL-1437
Elongated
1”
1-11/16” 2-1/4”
40.00
Ogee with Bead
Part
WL-1456
WL-1456-3
WL-1433
Ranch
WL-1434
Colonial
WL-1437
Ogee w/Bead
Rabbet / Slot Bits
Rabbeting Bits/Slot Cutters
Our industrial strength carbide rabbeting bits give
you fast, accurate, and simple results the first time
with no tear out on the entry cuts and perfect flush
milled surfaces. Use for rabbeting, slot cutting and
general joinery.
On WL-1220-1,
Cutting Depth changes
with size of bearing
Cutting
Depth
Kerf
Thickness
Cutting
Depth
3/8”
1/4” to 1/2”
Part
Kerf
Thickness
1/2”
1/2”
Cutting
Diameter
1-1/4”
1-1/2”
WL-1220
WL-1220-1
Depth with 4 Bearings: (1/4”, 3/8”, 7/16”, & 1/2”) & Allen Wrench
WL-1220-2
3/8”
1/16”
1-1/4”
WL-1220-3
3/8”
1/8”
1-1/4”
WL-1332-1 3/8” to 1/2”
5/32”
1-3/8”
Price
$17.50
25.00
16.25
16.25
20.00
WL-1220-1
WL-1220-3
On WL-1225-1,
Cutting Depth changes
with size of bearing
with 3 bearings (for biscuits) & Allen Wrench
WL-1220-4
WL-1335-1
3/8”
1/4” to 1/2”
1/4”
1/4”
1-1/4”
1-1/2”
16.25
20.00
WL-1220-5
WL-1220-7
3/8”
1/4” to 1/2”
3/8”
1/2”
1-1/4”
1-1/2”
16.25
31.25
Depth with 6 Bearings: (1/8”, 1/4”, 5/16”, 3/8”, 7/16” & 1/2”)
WL-1225-1
Part
WL-1225
WL-1225-1
Cutting
Depth
3/8”
1/4” to 1/2”
Kerf
Thickness
1/2”
1/2”
Cutting
Diameter
1-1/4”
1-1/2”
Price
$17.50
25.00
Depth with 4 Bearings: (1/4”, 3/8”, 7/16” & 1/2”) & Allen Wrench
WL-1225-2
WL-1225-3
WL-1342-1
3/8”
3/8”
3/8” to 1/2”
1/16”
1/8”
5/32”
1-1/4”
1-1/4”
1-1/2”
16.25
16.25
20.00
1-1/4”
1-1/2”
16.25
20.00
with 3 bearings (for biscuits) & Allen Wrench
WL-1225-4
WL-1345-3
3/8”
1/4” to 1/2”
1/4”
1/4”
WL-1225-5
WL-1225-6
WL-1225-7
3/8”
3/8”
1/4” to 1/2”
3/8”
3/4”
1/2”
1-1/4”
1-1/4”
1-1/2”
16.25
22.50
31.25
Depth with 6 Bearings: (1/8”, 1/4”, 5/16”, 3/8”, 7/16” & 1/2”)
Tech Depth of Cut and
Tip Bearing Selection
Selection of the correct bearing for a perfect rabbet cut can
be tricky! The formulas below will help you determine the
exact bearing size for any type of bit.
(D) Diameter of Cutter = outer diameter of the cutter.
(BOD) Bearing OD = Outer diameter of the guide bearing.
Bearing ID = Inner diameter of guide bearing (to fit the bit).
(CD) Cut depth = result of cutting using the guide bearing
against the material with the cutter.
Kerf = depth of cut (changed by height of router or shaper).
Use one of the formulas below to calculate the bearing, cutter diameter or cut depth you need.
BOD = D-(2*CD) Ex.: ½” bearing = 1” cutter-(2* ¼” cut depth)
CD = (D-BOD)/2
¼” cut depth = (1” cutter-1/2” bearing)/2
D = (2*CD)+BOD
1” Cutter = (2* ¼” cut depth)+ ½” bearing
4-Wing Slot Cutters
These slot cutters will give clean entry cuts without kickback while producing true square slots
with a clean flush bottom finish. All have a half
inch depth of cut and come in a wide selection of
kerf thicknesses.
Shank:1/4” dia., 1-1/4” Length
Cutting Cutting
Price
Dia.
Depth
WL-1330
1/16”
1-7/8”
1/2” $20.00
WL-1330-564 5/64”
1-7/8”
1/2”
20.00
WL-1331
1/8”
1-7/8”
1/2”
20.00
WL-1332*
5/32” 1-7/8”
1/2”
20.00
WL-1333
3/16” 1-7/8”
1/2”
20.00
WL-1334
15/64” 1-7/8”
1/2”
20.00
WL-1335
1/4”
1-7/8”
1/2”
20.00
Part
KERF
Ker
f Th
ickn
Part
ess
Cutting Cutting
Price
Dia.
Depth
1/16”
1-7/8”
1/2” $20.00
1/8”
1-7/8”
1/2”
20.00
5/32” 1-7/8”
1/2”
20.00
3/16” 1-7/8”
1/2”
20.00
15/64” 1-7/8”
1/2”
20.00
1/4”
1-7/8”
1/2”
20.00
3/8”
1-7/8”
1/2”
22.50
1/2”
1-7/8”
1/2”
22.50
WL-1335
Cut
tin
Dep g
th
KERF
WL-1340
WL-1341
WL-1342*
WL-1343
WL-1344
WL-1345
WL-1345-1
WL-1345-2
*WL-1332 & WL-1342 work with
#10 Biscuits
When ordering bits be sure and specify the ID and the OD
to assure you get the right bearing. If possible provide the
Woodline bit part number you are using the bearing on.
Ex.: 5/8” bearing with 3/16” ID to fit a WL 1225-1.
WL-1225-4
One of our most popular bits!
WL-1345
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
37
Joinery Bits
Dovetail Bits
Dovetail joints are incredibly
versatile and mechanically CL
strong. Make sliding dovetails, half blind dovetails,
French dovetails, etc. Dovetails are perfect for making
strong drawer joints, utility
and decorative boxes, fine
furniture, and much more.
Dov
eta
Wid il
th
Maloof Joint Bits
Sam Maloof is recognized as one of
America’s foremost craftsmen. As a
master woodworker he has perfected
his joinery to a level of artistry that
is astounding. To aid in his work,
he developed some very special
router bits. Woodline USA is the official
manufacturer of Sam Maloof precision
router bits for joinery. These bits feature a unique tapered rabbet bit with
tapered bearings developed to make
the dovetail joints specificaly for the
“Maloof chair”.
Cutting
Angle
WL-1303
WL-1299
Shank: 1/4” dia.,
Varying shank length
Cutting Dovetail Cutting Shank
Angle Width Length Length
WL-1300
7-1/2°
1/4”
5/16” 1-1/4”
WL-1301
8°
3/8”
3/8”
1-1/4”
WL-1302
14°
3/8”
3/8”
1-1/4”
WL-1303
14°
1/2”
1/2”
1-1/4”
WL-1303-1*
14°
1/2”
1/2”
1-3/4”
WL-1304
14°
3/4”
1/2”
1-1/4”
WL-1305*
8°
1/2”
13/16” 1-3/4”
WL-1299**
14°
1/2”
1/2”
1”
WL-1299-1** 14°
1/2”
1/2”
15/16”
Part
Price
8.10
8.10
8.10
8.10
8.75
8.10
8.75
13.75
16.25
WL-1303 and WL-1303-1 are used with most dovetail jigs.
*WL-1303-1 and WL-1305 have an extended shank length needed
for the Leigh™ jig.
**WL-1299 has a 1/2” OD Shank Mounted Bearing and WL-1299-1
has a 5/8” OD shank-mounted bearing. Both are useful with
templates.
SHANK: 1/2” Dia.
1½” Length
WL-6220
WL-1310
WL-1311
WL-1312
WL-1312-1
WL-1313
WL-1314
WL-1315
Cutting Dovetail Cutting
Angle Width
Length
7-1/2°
1/4”
5/16”
8°
3/8”
3/8”
14°
1/2”
1/2”
8°
1/2”
13/16”
8°
11/16”
1”
14°
3/4”
5/8”
8°
13/16”
1-1/4”
Tech
Tip
Shank
Price
Length
1-1/2” 8.10
1-1/2” 8.10
1-1/2” 8.10
1-1/2” 8.10
1-1/2” 10.00
1-1/2” 10.00
1-1/2” 11.25
cutting
depth
5/8”
Diameter
1”
bearing
slope
5°
Price
93.75
WL-6220 has a 5 degree angle and is used on the Maloof rocking chair to
join the arms and legs to the bottom of the chair.
WL1301
WL-6221
2 piece
5/8”
1”
3°
93.75
WL-6221 has a 3° angle and is used in straight chairs and other
right angle interlocked dovetail joints.
WL-6222
1 piece
5/8”
1”
0°
43.75
WL-6222 has no included angle (0°) and is used for joinery in
other areas of Maloof furniture.
Shank: 1/2” dia., 1½” length
Part
#
pieces
2 piece
Part
Key Hole Cutters
Use this handy bit for mounting pictures,
plaques, clocks or small cabinets.
SHANK: 1/4” Dia., 1¼” Length
Large
Dia
3/8”
Part
WL1312
Dovetail joints
Dovetails are used for drawer and case joint construction.
Two of the most common types are half blind and through
dovetails. Half blind are so named because they are only
visible from one side of the joint. Most half blind dovetails
are made with a 14 degree angle bit. Through dovetails are
visible from both sides and are usually cut with a 7-1/2 or 8
degree angle bit.
Many 1/2” dovetail jigs use a 7/16” guide bushing and a 1/2”
14° dovetail bit. The secret to successful jig use is bit height
and edge alignment of the material. Set the depth of cut to
3/8” as a starting point and increase depth if joint is loose,
decrease if joint is tight.
WL-1290
Slot
Height
3/16”
Small
Dia
1/4”
Large
Diameter
Slot
Height
Small
Diameter
Price
$10.00
SHANK: 1/2” Dia., 1½” Length
Large
Dia
3/8”
Part
WL-1289
Slot
Height
3/16”
Small
Dia
1/4”
Price
12.50
WL-1290
T-Slot Cutters
Make jigs, tools and accessories such
as T-rail slots for your router table.
Large Diameter
Slot
Height
SHANK: 1/4” Dia., 1¼” Length
Small
Diameter Part
WL-1291-1
Large
Dia
3/4”
Slot
Height
1/8”
Small
Dia
3/8”
Price
$16.25
SHANK: 1/2” Dia., 1½” Length
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
38
Part
WL-1291
WL-1291
WL-1291-2
WL-1291-3
WL-1291-5
Large
Dia
1”
3/4”
5/8”
15/32”
Slot
Height
3/8”
1/4”
3/16”
9/64”
Small
Dia
3/8”
3/8”
3/8”
9/32”
Price
22.50
17.50
20.00
20.00
NOTE: Use WL-1291-5 for standard oval track bolts.
Joinery Bits
CD
Combination
Box Joint Set
Finger Joint Bit
Bearing OD
Tooth
Depth
Perfect box joints with finger
lengths of 1/4”, 3/8”, and 1/2”
for fine furniture and cabinetry.
For any lengths in-between,
adjust the fence to the desired
depth of cut. Five carbide
tipped precision 3/16” slot cutters allow cutting lengths up to
1-11/16”.
Finger joints are used commonly in end-gluing application to join two boards of equal width and thickness end
to end. Our one piece finger joint bit is designed to give
a tight solid fit across the entire surface of the joint edge.
The flush bottom-mounted bearing eliminates the need
for complex fence alignment procedures while the staggered cutting order and full tooth surface taper significantly reduces finish sanding.
Part
WL-1429
CD
CL
1-3/8”
1-1/2”
Tooth
Tooth Bearing
Price
Depth
Taper
OD
5/16” 1/8” - 1/16” 3/4”
$56.25
WL-1432
Tooth
Bearing Tooth
Price
Thickness
OD
Depth
WL-1432 1-25/32” 1-11/16”
3/16”
7/8”
1/2” $81.25
Bearing changes to 1-1/8
3/8”
Bearing changes to 1-3/8”
1/4”
Part
CD
CL
WL-1429
Adjustable Finger Joint Bit
CD
Bearing OD
Complete with 6 stackable cutters, guide bearing, and shims, this cutter can be customized for use on sizes of material from 1/2” to 13/8”. For wider material, make 2 passes
with this reconfigurable bit and reach thicknesses over 2”. The shank-mounted bearing
simplifies fence setup, while the enhanced bit-centered chip clearance pulls the chips
away from the cutter teeth providing precision tight fitting finger joints in even the hardest
woods.
CL
Tooth
Part
CD
CL
Depth
WL-1431 15/16” 7/16” - 13/8” 1/4”
Tooth
Bearing Bearing
Taper
OD
ID
1/8” - 1/16” 1-7/64” 13/16”
YES,
they’re carbide!
Slot Cutter For
Demountable
Hinges
Large Diameter
Slot
Height
For easy installation of demountable
hinges.
Small
Diameter
Shim
od
5/8”
Shim
Price
Thickness
1/8”
$75.00
Note: Each of the stackable
cutters is tapered as shown.
Bit is pictured with cutters
spaced diagonally around
shank. The cutters may also be
aligned vertically as shown on
WL-1432 above.
Part
WL-1291-4
Large
Dia.
1-1/8”
Slot
Height
1/4”
Small
Dia.
3/8”
Price
$22.50
WL1291-4
WL-1431
Testimonial
I developed a special jig that required a very high-tolerance, perfect fit
dovetail to produce the desired result. The accuracy of the bit was essential
to my design. I tried many different brands and found that Woodline bits
were designed and ground to the high tolerance I required. The service
has been great and the bits are of exceptional quality.
Pat Allen, Designer, Inventor
Allen Designs
Tooth
Depth
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
39
Joinery Bits
Parallel Tongue &
Groove Bit
Flooring & Paneling
Tongue & Groove
CD
CL
This modified one piece tongue
and groove is designed similar to a
reversible glue joint in that you center the cutter the cutter in the stock,
make the first cut face up and the
adjoining edge face down. That’s it!
No changing out cutters or adjusting
WL-1257
the elevation between cuts.
Too
Thic th
kne
s
s
Too
Len th
gth
CD
CL
Tooth
Tooth
Min.
Part
Max.
Thickness Length Thickness Thickness
WL-1257 1-5/8” 1-1/16”
1/8”
5/32”
9/16”
WL-001
Shank: 1/4” Dia. ONLY, 1” Length
Shank: 1/2” Dia. Only, 1½” Length
Part
These specialty slot cutters are designed
for use with a hand router on installed
flooring to cut a groove for another piece
of flooring or a spline joint. WL-003 also
features a nail relief groove which allows
for the nail to be completely buried
without lifting the panel.
Price
1-1/16” $37.50
2-pc V-Groove Tongue &
Groove set
WL-001
WL-002
WL-003
WL-004
Slot
Cutting
Slot Bearing Nail
Height
Price
Thickness Depth
Dia.
OD
Relief
1-1/4” 1/8”
1/8”
5/16”
5/8”
NA $22.50
1-1/4” 1/4”
1/4”
5/16”
5/8”
NA 22.50
1-3/16” 7/16”
3/16”
1/4”
5/8”
1/8” 22.50
1-1/4” 7/32” 7/32”
5/16”
5/8”
NA 22.50
CD
2 piece V-groove tongue and groove with 90° Vgroove features a rounded 1/8” tongue and groove.
Tooth
Leng
th
Tooth
Thick
ness
WL-004
2-PC Tongue & Groove with 15°
FaceCut For Rail & Stiles
Same advantages of the WL-1338 series but includes a
15° slope on the outer edge.
WL-1483
Shank:1/2” Dia. ONLY, 1-1/2” Length
Part
CD
CL
WL-1483 1-3/8” 15/16”
Tooth
Depth
3/16”
Min.
Max.
Price
Thickness Thickness
5/16”
3/4”
$56.25
WL-1338-15
Shank: 1/2” Dia. ONLY, 1½” Length
Fully Adjustable
Tongue & Groove
Part
CD
CL
WL-1338-15 1-1/2” 1-1/8”
Tooth
Tooth
Min.
Max.
Depth Length Thickness Thickness
1/4”
3/8”
7/16”
13/16”
Price
$81.25
Classic 1/4” Tongue &
Groove
WL-1224
Similar to a standard tongue and groove cutter set, but
the tongue thickness and slot heights are adjustable.
Perfect for making shaker doors with undersized plywood
panels. Adjusting shims included.
One bit cuts both the tongue and the
groove. Cut the tongue first by aligning
the cutter on the desired height of the
joint. Once the tongue is cut, raise or
lower the cutter to align one of the
slot cutters with the tongue. Cut
the corresponding groove in the
exact location needed for a precision
joint without complicated measurements.
For thicker materials, flip the board over
to create a dual tongue and groove that
will hold up to an incredible
WL-1484
amount of stress.
Part
WL-1224
40
CD
1-5/8”
Tooth
Thickness
13/64” - 13/32”
Tooth
Length
3/8”
Shank: 1/2” Dia. ONLY 1-1/2” Length
Price
$67.50
Tooth Tooth
Min.
Max.
Price
Depth Length Thickness Thickness
WL-1484 1-5/8” 3/4” 1/4” 3/8”
7/16”
3/4” $42.50
Part
CD
CL
Joinery Bits
2-pc Tongue & Groove set
Perfect for flawless production of Shaker, colonial, or traditional rails and stiles
for cabinet doors. This bit cuts the entire surface of both the male and female
aspects of the joint, providing a flawless match across the entire length of
the board. Use our special 5.5mm tongue and groove set (WL-1338-5.5) for
panels made from undersize plywood for a “no rattle” insert.
Tooth
Depth
Shank: 1/2” Dia. ONLY, 1-1/2” Length
Part
CD
CL
WL-1338
WL-1338-5.5
1-1/2”
1-1/2”
1-1/8”
1-1/8”
Tooth
Depth
1/4”
5.5mm(7/32”)
Tooth
Min.
Max.
Price
Length Thickness Thickness
3/8”
7/16”
13/16”
$68.75
3/8”
7/16”
13/16”
$68.75
Tooth
Length
WL-1338-5.5
Testimonial
I know you don’t hear from us a whole lot, but mostly that’s because although we use
your cutters nearly every day, they just never seem to give up! We’ve tried every other
brand out there, and none of them hold a sharper edge longer than Woodline!
Our hardwood antique car frames and coaches are highly stressed assemblies.
The rigors of the road and demands of the show judges require 100% airtight joinery.
The precision geometry and exceptionally smooth cuts we get with Woodline cutters
are invaluable to us in maintaining that standard. Couple that with friendly world-class
service and reasonable pricing and the choice is simple. We buy nothing but Woodline!
Mark Johnston, President
Midwest Coach & Carriage Works
Specialty 1-PC Tongue & Groove Bit
Nail
Relief
Both bits include a unique rounded tongue that allows easy installation
of panels, even in tight spaces. Align the cutter to the board thickness
and cut the tongue first, then raise the cutter so that the slot cutter is
aligned with the tongue and cut the groove. WL-1488-1 is for standard
3/4” T&G and features a nail relief groove above the tongue allowing
the nail to be completely buried without lifting the panel to insure a
tight fit. With its 1/8” tongue, WL-1488-2 is designed for thin material
applications, and may be used on material as thin as 7/16” up to 7/8”.
Part
CD
CL
WL-1488-1
WL-1488-2
1-3/4”
1-3/16”
1-1/2”
7/8”
Tooth
Thickness
1/4”
1/8”
Tooth
Length
1/4”
1/8”
Min.
Max.
Price
Thickness Thickness
7/16”
7/8”
$56.25
1/4”
1/2”
$40.00
CD
Tooth
Depth
CL
WL-1488-1
Tooth
Length
WL-1488-2
1/4” Tongue & Groove with “V” Groove
CD
This bit combines a standard 1/4” tongue and a standard “V” groove on the face
of the joint. WL-1488 includes a unique rounded tongue that simplifies installation
by allowing easily installation of panels with allowance for glue space. Cut the
groove side first, then replace the slot cutter with the included spacer bushing to
cut the tongue. Perfect for both flooring and paneling applications.
CL
Tooth
Depth
Tooth
Length
Shank: 1/2 Dia. ONLY, 1-1/2” Length
Tooth
Tooth V Groove V Groove
Min.
Max.
Thickness Length Angle
Height Thickness Thickness
WL-1488 1-5/8” 1-3/16”
1/4”
1/4”
45°
1/4”
5/8”
1”
Part
CD
CL
Price
$43.75
Makes beautiful V-groove paneling!
WL-1488
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
41
Joinery Bits
Drawer Lock Bit
This bit’s special design allows for greater precision cuts
involving overlapping drawer fronts, allows you to
produce drawers faster, stronger, safer, and cleaner than
ever before.
CD
QUICK TIP: Run sides vertically against the fence, then
set the fence back for the thickness of the material and
run the back and front panels of the drawer horizontally.
Reset the fence and cut all the slots for the drawer bottom. Detailed instructions available at www.woodline.
com.
WL-1435
Tooth
Depth
CL
Part
WL-1435
CD
CL
1-3/4”
1/2”
Tooth
Depth
3/16”
Tooth
Taper
5/32” - 13/64”
Min.
Max.
Price
Thickness Thickness
5/16”
none
$43.75
Wainscot Paneling Bits
Bits have the mated 3/16” rounded tongue and groove with
the distinguishing double-sided full depth 45° “V” groove
cutters. The third bit produces the partial 9/32” bead with
“V” groove.
22-1/2° Lock Miter 2-PC Set
WL-1495
Make octagons or the corner cabinet project that you’ve
been putting off. This set will make a perfect 45° angle
and make glue-up a snap.
WL-1146
Shank: 1/2” Dia. Only
WL-1146
3-PC Wainscot Set
$93.75
Part
WL-1495
CD
1-1/2”
CL
1-3/32”
Price
$73.75
90° “V” Groove
2-PC Boat Planking Set
Male and female complimentary
cuts allow production of a simple
self-centering glue joint with more
glue surface than a straight butt joint.
Perfect for applying banding to a
plywood panel.
This boat planking set is used to make the water-tight
interlocking joint that will form a curve. These bits feature
an oversized overall diameter which simplifies cutting
cedar and other popular boat materials, producing the
flawless joint that will keep your boat or canoe above
water. Also makes great slats for planters, buckets and
curved columns using 1/4” material.
Part
WL-1324M
WL-1324F
WL-1324FM
Type
of Cut
Cutting
Diameter
Cutting
Length
Cutting
Depth
Price
Male
1-1/4”
3/4”
3/8”
$43.75
3/8”
$43.75
$73.75
Female
1-1/4”
1”
Get Both Bits For Only
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
42
WL-1324M
Part
CD
CL
WL-1489 1-1/2” 7/16”
Tongue
Depth
1/4”
Tooth
Min.
1/4”
1/4”
WL-1489
WL-1324F
Max.
Length Thickness Thicknes
21/32”
Price
$48.75
Joinery Bits
45° Lock Miter Bits
45° Lock Miter bits are perfect for producing extra strong
90° miter joints. These modified tongue and groove bits
effectively double the glue surface area of the joint while
distributing the mechanical stress across a much larger
percentage of the surface. This creates a joint that is, in
most cases, many times stronger than the wood itself.
Perfect for boxes, cabinet framing, fine furniture framing,
columns, hollow beams, and much more.
Reversible Glue
Joint
Use this bit to edge join materials with
a maximum gluing surface for tabletops or large panels. The slight taper
aids in aligning the boards by drawing
the surfaces together to produce perfectly aligned faces on jointed surfaces
with no squeeze-out.
Part
WL-1420-2
Cutting
Diameter
1-1/2”
Height
1/2”
Min.
Max.
Price
Thickness Thickness
3/8”
1/2”
$36.25
Part
Cutting
Diameter
WL-1420
2-3/4”
WL-1420-1
2”
WL-1420-3
1-1/2”
Height
1-1/4”
7/8”
13/16”
CD
WL-1430-3
CL
Tooth
Tooth
Min.
Max.
1” 1-1/4” 7/32”
5/32”
9/16”
Price
1-1/4” $37.50
Part
WL-1430
Min.
Max.
Price
Thickness Thickness
3/4”
1-1/4” $55.00
1/2”
3/4”
$42.50
3/8”
5/8”
$36.25
Part
CD
CL
WL-1430 1-3/4” 1-1/4”
Tooth
Tooth
Min.
Max.
3/16”
3/16”
9/16”
Price
1-1/4” $43.95
YES,
they’re carbide!
Buy the Set & Save!
WL-2042 Lock Miter Set
Get 3 of the 1/2” shank lock miter bits
packaged in a set. A $144 value!
WL-1430-3
WL-1420
WL-2042
Tech
Tip
1/2” Shank only
$111.20
45° lock Miter bits
1. Insert and properly tighten Lock Miter
bit in the collet. At least 1” - 1¼” of shank
must be in collet for safety. Set router for
proper speed.
2. Adjust router until the centerline of cutter
aligns with centerline of stock. An easy
method to determine the center is to miter
a sample cut in two pieces. Rotate one
piece and fit together. Adjust height for ½
the distance of the misalignment from
flush. Be as accurate as possible.
Reversible Glue
Joint for
Drawers
Miniaturized version of our
standard
reversible glue joint bit, specifically designed to handle
material smaller than 9/16”
as commonly used in drawer
construction.
Part
CD
CL
WL-1430-1 1-1/16” 3/4”
3. Set fence back from leading edge of bit an
equal distance to the stock thickness. This should
produce a knife edge when cut.
4. Perform test cut to make sure bit is set up evenly.
A good way to ensure that the cut is centered
properly is to measure each 45° plane. If each plane is the exact same
length, the cutter is properly centered. (See A=B)
WL-1430-2
Tooth
Tooth
Min.
Max.
3/16”
5/32”
1/2”
3/4”
Price
$30.00
Part
CD
CL
WL-1430-2 1-1/16” 9/16”
Tooth
Tooth
Min.
Max.
5/32”
5/32”
7/16”
9/16”
Price
$30.00
5. With stock cut to size, cut side A with material cut horizontally.
6. With stock cut to size, cut side B with material cut vertically.
If snipe occurs at end of cut, it may be due to excessive pressure against
fence or table. You can use double-face tape to secure a guide strip to
the side of both A and B. This will serve as a guide against the fence
and table. You should not have to re-adjust the fence location to allow
for the scrap.
Visit www.woodline.com for the latest tips and instructions.
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
43
Door, Window & Cabinetry Bits
2-PC Rail & Stile Matched Sets
Our 2-piece rail & stile sets are factory-matched with precision grinding
for a perfect fit every time. The included fully enclosed ball bearing allows you to make arched raised panel doors by using templates.
Shank: 1/4 Dia., 1-1/4” Length
Part
WL-1360C
WL-1361C
WL-1362C
WL-1399C
Profile
Roman Ogee
Roundover
Cove & Bead
Classic Ogee
Slot
Height
1/4”
1/4”
1/4”
1/4”
Slot Profile Profile
Cut
Price
Depth Height Depth Dia.
3/8”
3/8”
3/8” 1-1/2” $81.25
3/8”
3/8”
1/4” 1-3/8” 81.25
3/8”
3/8”
3/8” 1-3/8” 81.25
3/8”
7/16”
3/8” 1-1/2” 81.25
WL-1336-2
SAFETY NOTE: Because these bits have a 1/4” shank, extra care
and multiple passes must be taken. Taking multiple passes greatly
reduces the possibility of injury and the possibility of damage to the
cutters.
Profile
Slot
Slot
Height Depth Height
WL-1336-2
Roundover w/Bead
1/4”
3/8”
7/16”
WL-1337-2
Classic Ogee
1/4”
3/8” 13/32”
WL-1338-15
15° Facecut (Shaker)
1/4”
3/8”
7/16”
WL-1360**
Roman Ogee
1/4”
3/8”
7/16”
WL-1360-5.5*
Roman Ogee
5.5mm 3/8”
7/16”
WL-1361**
Roundover
1/4”
3/8”
7/16”
WL-1361-5.5*
Roundover
5.5mm 3/8”
7/16”
WL-1362**
Cove & Bead
1/4”
3/8”
7/16”
WL-1368-2
Wedge
1/4”
3/8”
7/16”
Part
Profile
Profile
Depth
3/8”
3/8”
3/8”
3/8”
3/8””
3/8”
3/8”
3/8”
3/8”
Cut
Price
Dia
1-5/8” $81.25
1-5/8” 81.25
1-1/2” 81.25
1-5/8” 81.25
1-5/8” 81.25
1-5/8” 81.25
1-5/8” 81.25
1-5/8” 81.25
1-5/8” 81.25
WL-1338-15
WL-1337-2
YES,
they’re carbide!
WL-1361
WL-1360
WL-1362
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
44
Tech
Tip
WL-1368-2
Rail & Stile BITS
Rail and stile doors are easily produced and once you
have mastered the techniques they are easy to setup
and run. For the novice they can be intimidating due to
the complex nature of the required fit. There are some
simple steps that can help to make the project go easier
at our website, www.woodline.com.
Buy the Set & Save!
Cabinet Making Sets
$ave by buying one of the 3 pc or
6 pc sets shown on page A1. We
also have set up blocks, instructional DVDs and written instructions
to assist you.
1-PC Rail & Stile bits
Produce rail and stile door frames for cabinet doors.
These bits don’t need to be taken apart, reversed, or
have parts swapped, just raise and lower the bit to
change cuts. Rail end is cut face up and edge is cut
face down. Works great with all 3/4” standard thickness material.
WL-1336
Cutting
Length
1-11/32”
Cutting
Diameter
1-5/8”
Part
WL-1336
WL-1337
WL-1365
WL-1365-5.5
WL-1366
WL-1367
WL-1368
WL-1374
Slot
Height
1/4”
Slot
Depth
3/8”
Profile
Height
7/16”
Profile
Depth
3/8”
Price
WL-1337
$65.00
Profile Description
Roundover with Bead
Classic Ogee
Roman Ogee
Roman Ogee (for undersize plywood)
Roundover
Cove and Bead
Wedge
Double Roundover
WL-1366
WL-1367
WL-1365
WL-1374
WL-1368
3-Pc Reversible Sash
cutter Set
2-Pc Window grill
cutter Set
Make your own windows. Our 3
piece set gives you a choice of using a
butt joint, tenons, or dowels.
Make snap-together grills for a divided-light
look. Cutters create the perfect-fitting lapped
joint you need. Instructions available online at
www.woodline.com.
Shank: 1/2” Dia. ONLY,
1-1/2” Length
WL1364S
$111.25
Profile:
Ogee
CD:
1-1/4”
Slot Height:
3/16”
Slot Depth:
3/8”
Profile Height:
3/8”
Profile Depth:
1/4”
Min - Max Thickness: 4/8” - 1-11/16”
WL-1468
2 pc. set
$37.50
WL-1468
45
Panel Raisers
Raised panel doors are the standard for kitchens cabinets, jewelry boxes, entry and passage doors, fine furniture, and
much more. Woodline’s many premium rail and stile cutters combine with any of our panel raisers to achieve the look
you’re after.
Horizontal Panel Raisers
Available with and without undercutter. Undercutter cuts the back side of
the door making a tongue to fit the slot in rail & stile at the same time the
profile is cut.
31/2” DIA. Panel Raisers
These bits DO NOT have an undercutter.
WL-1329
SAFETY Note: Must use variable speed
router at maximum 10,000 rpm.
SHANK: 1/2” Dia. only, 1½” Length
Cutting
Diameter
3-1/2”
Part
WL-1329
WL-1350
WL-1351
WL-1352
WL-1353
WL-1359NU
WL-1363NU
WL-1414
WL-1421
WL-1423
WL-1424
Cutting
Length
5/8”
Bearing
Price
OD
1-1/2”
1/2”
$58.00
Profile Description
Double Convex
Ogee
15° Face Cut
Traditional
Convex
12° Face Cut with Quarter Round
Southwest
Triple Step
Ogee with Stepped Cove
Ogee with Bevel
12° Face Cut with Ogee
Reveal
WL-1363NU
WL-1414
WL-1350
WL-1351
WL-1353
WL-1352
WL-1421
WL-1423
WL-1359NU
WL-1424
Interior/Exterior Door
Rail & Stile Sets
3 piece set allows double-sided traditional rail and
stile joinery with either doweled or mortise and
tenon joints. Interchangeable center cutter and
bearings (included) for 1/4” or 1/2” panels. Interior
door typically use 11/4” stock with 1/4” edge panels
and exterior doors use 13/4” stock with 1/2” edge
panels. Included cope cutter for tenon joints allow
any length of tenon for extra strong joints.
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
46
WL-1418-3
Part
WL-1418-3
WL-1419-3
Profile
Roman Ogee
Roundover
Price
$211.25
211.25
WL-1419-3
CD:
Slot Height:
Slot Depth:
Profile Height:
Profile Depth:
Min Thickness: Max Thickness:
1-5/8”
1/4” or 1/2”
3/8”
19/64”
3/8”
7/8” (1/4” Slot)
2” (1/2” Slot)
3-1/4” DIA. Panel Raisers
with Undercutter
These panels raisers are by far the most popular in our
collection. Cut both the profile and the 1/4” tongue with
the same bit.
SAFETY Note: Must use variable speed router.
YES,
they’re carbide!
Cutting
Dia
3-1/4”
Cut
Length
5/8”
UC
Dia
1-5/8”
Reveal
1-3/8”
UC
Height
1/4”
Part
WL-1346
Profile Description
Ogee
WL-1346-3
Shallow Ogee for 5/8” Stock
WL-1346-5.5*
Ogee with 5.5mm Undercutter
WL-1347
Traditional
WL-1348
WL-1351-2
WL-1359
WL-1363
Convex
15° Facecut
12° Facecut with Quarter Round
Wave
Bearing
OD
1/2”
Price
WL-1346
$67.50
WL-1347
WL-1348
*With WL-1346-5.5, tongue produced will be 5.5mm for
use with undersize plywood rail & stile sets.
WL-1351-2
WL-1363
WL-1359
UnderCutter
For Panel
Raisers
2-1/2” Dia. Panel Raisers
SAFETY Note: Must use variable speed
router.
WL-1351-1
WL-1350-1
Shank: 1/2” Dia. ONLY 1-1/2” Length
Cutting
Dia
2-1/2”
Cutting
Length
5/8”
Part
WL-1350-1
WL-1351-1
WL-1352-1
WL-1353-1
Reveal
1”
Bearing
OD
1/2”
Profile Description
Ogee
15° Facecut
Traditional
Convex
Price
Shank: 1/2” Dia. ONLY,
1½” Length
$37.50
WL-1353-1
WL-1352-1
Shave away the exact
amount of material for
a glove-like fit into your
rail & stile.
WL-1354
WL-1354
Cutting Diameter:
Cutting Depth:
Cutting Length:
Edge Radius:
Bearing OD:
$25.00
1-3/4”
5/8”
3/8”
3/8”
1/2”
47
OGEE Panel Raiser with
Undercutter
Vertical Panel Raisers
Vertical panel raisers require less router power to operate
than horizontal models and need a smaller opening in
the router and table. They cannot be used with patterns
to make arched doors. A tall router table fence is recommended to prevent tipping of the material as it is cut.
SAFETY Note: Use
variable speed
router.
Part
WL-1346M
SHANK: 1/2” Dia. ONLY,
1½” Length
UC
UC
Dia
Hgt tongue
OD
27/32” 1-5/8”
1/4”
1/4”
1/2”
$67.50
WL-1346-2 2-3/4” 1-1/16” 1-1/8” 1-7/8”
1/4”
1/4”
1/2”
67.50
PART
Cut
Cut
Dia
Length
WL-1346M 2-3/16”
1/2”
Reveal
Panel Bearing
WL-1355
WL-1356
WL-1357
WL-1358
Price
2” Dia. Panel Raisers
WL-1359-V
WL-1363-V
1-5/8”
1-5/8”
1-5/8”
1-5/8”
Cutting
Diameter
1-1/2”
1-1/2”
1-3/8”
1-1/2”
$47.50
47.50
47.50
47.50
1-5/8”
1-3/8”
47.50
1-5/8”
1-5/8”
47.50
Profile
Reveal
Ogee
15° Face cut
Traditional
Convex
12° Face cut
w/Quarter Round
Wave
CD
Reveal
SAFETY Note: Since these bits have a 1/4” shank, extra
care and multiple passes must be taken. Taking multiple
passes greatly reduces the likelihood of injury and the
possibility of damaging the cutters.
Cutting
Diameter
2”
Cutting
Length
1/2”
Part
WL-1387
WL-1388
Reveal
3/4”
Bearing
OD
1/2”
Price
$31.25
WL-1355
WL-1356
WL-1357
WL-1358
Profile Description
Ogee
20° Facecut
WL-1387
WL-1388
1-3/4” Dia. Panel Raiser
This bit DOES NOT have an undercutter.
Cutting
Diameter
13/4”
Cutting
Length
1/2”
Part
WL-1349-1
48
Reveal
5/8”
Bearing
OD
1/2”
YES,
they’re carbide!
Price
$26.25
Profile Description
Elongated Sloping Ogee
WL-1349-1
WL-1359-V
WL-1363-V
Price
Door Lip Bits
European Hinge
35mm Boring Bit
Door lip bits add a finger pull style profile to the
door or drawer edge allowing you to create that
hardware-less finish that visually thins the edge.
These bits are also great for table edges.
This forstner-style bit allows you
to produce a clean, flawless 35mm
hole for popular European recessed
hinges.
Part
Top
Bottom
Narrow
Depth
Height
Please Note: FOR DRILL PRESS USE ONLY
AT LOW SPEED
Price
Diameter
Diameter
Diameter
of cut
WL-1450
1-5/8”
1-1/16”
19/32”
1”
1”
$40.00
WL-1451
1-5/8”
1-3/16”
1/2”
1-1/8”
1”
40.00
WL-1452
1-1/2”
1-1/2”
5/8”
7/8”
1-3/8”
40.00
WL-1453
1-5/8”
1-5/8”
11/16”
15/16”
1-9/32”
40.00
WL-1454
2-1/4”
1”
3/4”
1-1/2”
1”
43.75
WL-1454-1
2”
1”
3/4”
1-1/4”
1”
43.75
WL-1454-2
1-1/4”
1”
5/8”
1/4”
1-1/16”
43.75
WL-1135
Part
WL-1135
Cutter Diameter Cutting length
35mm (13/8”)
9/16”
Price
$26.00
Finger Pull Bits
Finger pull bits are a perfect
profile for drawer finger edges
and cabinet door lips.
WL-1454 is a specially designed door lip to accommodate European hinges.
Bottom D
WL-1356
WL-1425 Cutting
Profile
Narrow D
WL-1425-1
SHANK: 1/2” DIA. ONLY, 1-1/2” Length
Top
Bottom Narrow
DC Height Price
Diameter Diameter Diameter
WL-1425
1-1/2”
1-7/8”
1”
7/8” 1-1/8” $40.00
WL-1425-1
1”
1-1/8”
13/16” 5/16” 3/4” 25.00
Part
Top D
WL-1450
WL-1451
WL-1450
WL-1451
2-Pc Rail & Stile Set for
Glass Doors
Eliminates the standard lip left on normal rail and stile
cuts allowing glass installation
with glass retainer
brackets shown
below.
WL-1339
WL-1453
WL-1452
NOTE: WL1452 may also
be used as a sill edge
Shank: 1/2” dia. only,
1½” Length
WL-1339
Profile:
CD:
Slot Height:
Slot Depth:
Profile Height:
Profile Depth:
WL-1454
Min - Max Thickness:
$68.75
Roundover
1-1/4”
3/16”
3/8”
3/8”
1/4”
5/8” - 13/16”
Glass retainer
brackets
Holds glass securely in place.
WL-1454-1
WL-1454-2
WL-1339C
WL-1425
Cutting Profile
$0.13 each
1/4” Shank is RED
CD = Cutter Diamter
CL = Cutting Length
R = Radius
D = Shank Diameter
SL = Shank Length
49
Accessories
7 pc CounterSink set
Drill pilot holes and countersinks in one step. 1/8”, 9/64”,
5/32” 11/64”, 13/64”, 3/16” and 7/32”. Bits are replaceable. Wooden storage box included.
WL-QCD7
PRICE
$16.00
17.00
17.00
17.00
18.00
18.00
18.00
18.00
19.00
20.00
20.00
PART
4937
4100
4116
5125
4316
4112
4131
4137
4143
4150
4156
Size
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
This five piece set will be indispensable in your shop.
Sizes: 1/8”, 3/16”, 1/4”, 3/8” & 1/2”.
WL-BBAR
PRICE
22.00
22.00
23.00
23.00
24.00
25.00
25.00
25.00
27.00
27.00
28.00
PART
4162
4168
4175
4181
4187
4193
4200
4206
4212
Size
1-5/8”
1-11/16”
1-3/4”
1-13/16”
1-7/8”
1-15/16”
2”
2-1/16”
2-1/8”
PRICE
30.50
30.50
30.50
30.50
32.50
33.50
35.00
36.00
36.00
$31.25
Adapter for using 1/4” bits in your 1/2”
router. “Top hat” style for ease of use.
$5.00
Toggle Clamps
Provides an economical method for work holding and
clamping. These powerful clamps
have great holding pressure
and are easy to adjust.
WL-C102
Thermoset Table Insert
MDF Installation Template
$34.99
17.50
WL-C101
Horizontal Clamp - 500 lb holding cap.
Horizontal Clamp - 250 lb holding cap.
Vertical Clamp - 250 lb. holding cap.
Order your Woodline Products
today from Stockroom Supply.
1-877-287-5017
ADT850
ADT851
ADT852
ADT853
ADT854
1/4” x 4” X 48” HDPE Sheet
3/8” x 3/4” X 48” Miter Strip
$13.75
17.50
20.00
26.50
6.90
NOTE: This item is oversized and additional shipping charges may be applied.
woodline Adjustable push
block
Safety should always be your first consideration in the
workshop. This ultra heavy-duty push block has been
specifically designed with the woodworker in mind. With
fully adjustable handle position, adjustable material
catch stops, and super grip pad, this push block is great
anywhere in the shop. You deserve the best!
WL-C100
50
ADT170A
INSTEM
HDPE Slick Sheets
Collet Reducer
WL-C100
WL-C102
WL-C101
9” X 12-1/16” X 3/8” black thermoset insert. Router bit changes
and adjustments are easy with
a router table insert. Removeable rings (3-7/8”, 2-5/8” & 1-1/4”
openings) provide close
support or your material. Leveling screws in each corner.
See instructions for router installation at
www.woodline.com.
High density polyethylene sheets are perfect for jigs,
fixtures and fences. 4”x48”
lengths are available in a variety
of thicknesses for all your project
needs. Sheets are easily cut with
carbide tipped saw blades and
router bits. Useful for table saw
runners, router templates, T-track
applications, stepped fences or for
countless other projects around
your shop. Use the 3/8”x3/4” strip
in any standard miter slot.
Extend the depth of cut up to 2-1/4”.
New smaller round style ideal for bowl
projects. Available in ½” shank only.
WL-7800
$25.00
Router Table Insert
Collet Extender
WL-COLEXT
$18.95
brass measuring bars
Produce a clean, flatbottomed hole every time.
Features a 3/8” diameter
hex shank for a drill press,
precision centering tooth, full
surface shearing, high rake
angle and anti-walk stabilization teeth.
Size
1/4”
5/16”
3/8” 7/16”
1/2”
9/16”
5/8”
1-1/16”
3/4”
13/16”
7/8”
Protects and organizes
router bits. Holds up to
60 1/4” shank and 50 1/2”
shank bits in a sturdy foam insert. Perfect for use in
drawers.
WL-RBS $25.00
CARBIDE Forstner Bits
PART
4250
4312
4375
4468
4500
4562
4625
4687
4750
4812
4875
Router Bit Storage
$9.50
9.50
9.50
WL-PB1
Woodline Adjustable
Push Block
$37.50
Roto Raspa
Roto Raspa
A universal disc for angle grinders - A fully patented Croation product. This superior product
is used for cutting soft materials such as wood, plastic, rubber etc. and removes the particles
through the holes in the disc, so that they are not reground (causing friction and heat which
shorten the life of other comparable products.) It’s unique design makes it possible to remove
large amounts of material in a few quick passes. Available in 3 grades - Coarse, Medium and
Im
Not for portant
Stainles Use on Steel,
s or Gla
ss
Item
Price
Roto Raspa Fine
$32.95
Roto Rasoa Medium
$32.95
Roto Raspa Coarse
$32.95
1 of Each
$79.00
Beexwax Products
ATTENTION TURNERS We now sell Beeswax and Carnuba Wax for you finishing needs. Each package comes with
instructions on how to make your own wood polish. And for everyone ... moisturizing cream with beeswax and lip balm for
the times that your shop dries out your skin OR for anytime!! (Great gift idea!) All natural products.
Beeswax and Carnuba Wax.
Comes with a recipe for Wood Polish
Item
Price
5 oz. Beeswax
$7.00
5 oz. Carnuba Wax
$9.00
5 oz. Combo Pack
$8.00
2 oz Skin Cream
$9.25
Lip Balm
$4.00
Skin Cream
Lip Balm
5 Flavours - Natural, Peppermint, Cherry,
Tangerine, and Bubblegum
51
Super Pads
An innovative design, the Use-it SuperPad is a paper disc perforated across its entire surface. This
allows the sanding dust that is produced to be removed by suction across the entire surface. The
3/32” foam layer in between the sandpaper and the backing allows for cooler sanding, and additional
dust collection keeping even more dust from floating around. These discs outlast most regular discs.
Available in 5” and 6” discs fitting any hole pattern hook and loop orbital sander. Grit selection from
80 grit to 600 grit. Assorted package includes 80, 120, 180, 240 and 320 grits.
NEW
R
LOWE
PRICE
*Choose from grits available:80, 100, 120, 150, 180, 220, 240, 280, 320, 400, 500, 600
Disc Size
*Pkg Qty
Price
*Pkg Qty
Price
Assorted
Bulk 25 pc
Single Grit Price
5”
1
$1.39
10
$11.25
$11.25
$26.00
6”
1
$1.79
10
$14.95
$14.95
$35.50
Super Finishing Pads
The Superfinishing Pad allows flexibility and the finest grits available for super
fine finish sanding. With its’ 3/16” foam layer within, the dust will collect within
the pad rather than spread across your project. Combined with dust extraction,
automotive and boat builders will find these discs nearly eliminate dust coming off
the sander, therefore maintaining cleaner air and a cleaner surface for the next
coat. Woodworkers will enjoy this material for in between coat sanding, finish
sanding on carvings, and because of the tremendous flexibility, woodturners
will appreciate the finish they can achieve without heat build up, on spindles
and bowls. Because of the price, these discs are certainly not going to replace
existing sanding discs but will be the standard for high end cabinet makers and
master craftsmen. They are just too good not to have some of these discs in your
shop to supplement your existing sanding methods. Available in 5” and 6” discs
fitting any hole pattern hook and loop orbital sander. Grit selection from **240
grit to 3000 grit. Assorted packages include a Woodworking sampler with **240,
320, 600, 800 and 1200 grits and a Metal working sampler with 1200, 1500, 2000,
2500 and 3000 grits.
NEW
R
LOWE
E
C
I
PR
*Choose from grits available: **240, 320, 600, 800, 1200, 1500, 2000, 2500, 3000
*Pkg Qty
Price
*Pkg Qty
Price
Woodworking or
Metalwork Assorted
Sampler
5”
1
$2.39
10
$22.50
$22.50
$54.00
6”
--
--
--
--
--
$84.00
Disc Size
Bulk
25 pc Single Grit Price
** 240 grit is discontinued and available only while supplies last
EZee BUFF‑it
This new hook and loop backed product is made from natural fibres in order to give
you the benefit of being environmentally friendly. It has the ability to absorb polishes
and compounds better, and will not scratch or burn. Unlike most other buffing wheels,
Ezee Buff-its have the advantage of being washable and re-used over and over again.
They are adaptable to all hook and loop sanders and are available in 4 different sizes.
This is a great product for effective polishing or buffing on all types of materials. Ezee
Buff-its are great for wood, metal, plastic, glass and any other projects that require a
little touching up. You may use with your own compounds or visit Stockroom’s website
for compounds that Stockroom Supply carries.
Item #
BU3002
BU3003
BU3005
BU3006
52
Size
2” EZee Buff-it
2pc.
3” EZee Buff-it
2pc.
5” EZee Buff-it
2pc.
6” EZee Buff-it
2pc.
Price
$5.99
$6.99
$14.99
$19.99
Applications
• Final polishing of wood surfaces after laquer or polycoat
• Polishing most metals before plating
• Polishing with auto repair compounds on paint repairs
• Finishing / polishing stainless steel
• Cut & colour buffing prior to plating
• Polishing composite surfaces ie. boats
• Buff / polish jewellery
• Deflashing rubber / plastic parts without scratching
• Polishing / buffing musical instruments
• Polishing glass • Polishing leather goods
• Applying wax to cars and turnings
Hook & Loop Discs
A Stockroom Supply
Specialty ‑ one our
most popular products!!
As many of you already know, Klingspors’ stearate coated,
hook and loop discs are absolutely top of the line ‑ yet still
economical. Many of our customers refuse to use any other
brand. These discs are a premium product that stand up to
the hardest hardwoods, won’t load up with pine and spruce,
and hold up really well on painted or varnished surfaces and
light metal work. The best stearate coated sandpaper for
the money you’ll ever use! These discs are the freshest
discs available to us. To get the most life out of them, store
them in an airtight container (such as a ziplock baggie).
Also available in PSA discs (pg. 24), hook & loop rolls (pg.
13) and 9x11 sheets (pg 25).
Definitely The Most Sanding Power for Your Money!
‑‑‑Package Quantities are ONE grit only‑‑‑
(excluding assorted packages)
Disc Size
Pkg
Qty.
80, 100, 120,
150, 180, 220,
320 grit
Pkg.
Qty.
Assorted Package
(5 grits preselected)
Pkg.
Qty.
40 grit
*60
*80, *100, *120, *150,
*180, *220, 240, 280,
*320, 400
500, 600
grit
2” x 0
10
$3.99
25
$9.00
50
$21.50
$19.00
$16.50
$16.50
3” x 0
10
$4.50
25
$10.50
50
$24.00
$22.00
$19.00
$19.00
4-1/2” x 8
10
$5.75
25
$14.00
50
$37.00
$33.00
$27.00
$27.00
5” x 0
10
$5.50
25
$13.25
50
$31.00
$28.00
$24.00
$26.00
5” x 5
10
$5.50
25
$13.25
50
$31.00
$28.00
$24.00
$26.00
5” x 8
10
$5.50
25
$13.25
50
$31.00
$28.00
$24.00
$26.00
6” x 0
10
$6.50
25
$16.00
50
$36.00
$32.00
$29.00
$31.00
6” x 6
10
$6.50
25
$16.00
50
$36.00
$32.00
$29.00
$31.00
Disc Size
Pkg.
Qty.
*80 grit
*120 grit
Pkg.
Qty.
40 grit
60 grit
*80, 100, *120, 150, 180, 220, 240,
280, 320, 400, 500, 600 grit
8” x 0
1
$2.20
$2.20
10
$23.00
$21.00
$19.00
9” x 0
1
$2.49
$2.49
10
$32.00
$25.00
$22.00
10” x 0
1
$3.20
$3.20
10
$45.00
$34.00
$29.00
12” x 0
1
$4.00
$4.00
10
$57.00
$45.00
$35.00
*Grits in stock. For other grits, allow for a 2 ‑ 3 week delivery (or longer for 400, 500, and 600 grits).
Flexible Half Moon or Ergo Molded Hand Pad
Now make more use of all
your Hook and Loop discs with
the Flexible Half Moon Hand
Pad or Ergo Molded Hand
Pad. These Hand Sanders
are designed to use with 5”
and 6” Hook and Loop Discs
Item #
Description
Price
CV4050
5” Half Moon
Hand Pad
$6.99
CV4060
6” Half Moon
Hand Pad
$7.99
CV4055
5” Ergo Hand Pad
$17.49
CV4065
6” Ergo Hand Pad
$19.49
These discs are rated the best value for your money.
53
Hook & Loop Accessories
Hook & Loop
Conversion System
The sanding industry is rapidly changing to
hook and loop ‑ so don’t be left behind when it
comes to this system. You can easily convert
your existing PSA sander to the hook and loop
system or replace a worn out hook and loop pad
with one of these. This VELCRO® brand Hook
and Loop Conversion system is equipped with
a premium adhesive backing which adheres to
almost any surface. A variety of sizes to choose
from, including “conversion by the foot” for all you
do-it-yourselfers.
m Paul... out
A tip froRe
place a worn
To
d
Hook & Loop Paersion, or original
ok & Loop Conv
removed, wash
Remove worn Ho
d. When disc is
pa
p
loo
d
applying new
hook an
e
for
be
r thinner
pad with laque
conversion.
or
sandpaper
simply remove
off
me
co
t
no
sandpaper
of
t
If pad will
ee
sh
place a 9 x 11
worn out
off
nd
from your sander,
sa
nch, grit up, and th. Wash with
be
rk
wo
ur
yo
on
oo
until pad is sm
ck on new
hook and loops
any dust and sti
ve
mo
re
to
er
laquer thinn
conversion disc.
Item #
Size
Price
FL3002
2” x 0 disc
$5.99
FL3003
3” x 0 disc
$6.99
FL3005
4-1/2” x 8
disc
$14.99
FL3006
5” x 0 disc
$14.99
FL3007
5” x 5 disc
$14.99
FL3008
5” x 8 disc
$14.99
FL3009
6” x 0 disc
$16.99
FL3010
6” x 6 disc
$16.99
FL3012
8” x 0 disc
$17.99
FL3013
9” x 0 disc
$18.99
54
Item #
Size
Price
CV2002
2” x 0 disc
$2.99
CV2003
3” x 0 disc
$3.99
CV2005
4-1/2” x 8 disc
$4.99
CV2006
5” x 0 disc
$4.99
CV2007
5” x 5 disc
$4.99
CV2008
5” x 8 disc
$4.99
CV2009
6” x 0 disc
$5.99
CV2010
6” x 6 disc
$5.99
CV2012
8” x 0 disc
$8.99
CV2013
9” x 0 disc
$9.99
CV2014
10” x 0 disc
$12.99
CV2015
12” x 0 disc
$13.99
CV2020
4-1/2” x 5-1/4” (1/4 sheet)
$4.99
CV1003
$5.99
CV1006
$8.99
CV1012
$12.99
ul...
1/4
A tip froemconvPerasio
n system on your
How to use th
er
sheet Palm Sand. Simply clip the
cking
ve the ba
u “used” to do
No need to remo
ur sander like yo
yo
o
int
n
ial 4‑1/2” wide
ec
conversio
sp
r
ou
n cut a piece of
the
d
an
d time saving
r
de
pe
ad
pa
with your sand
d you’ll have the
an
ll
ro
r
pe
t.
pa
ee
nd
sa
rting a fresh sh
stearate coated
anging grits or sta
ch
en
wh
ce
ien
conven
Hook & Loop “Flex” Conversion
An awesome addition
to your hook and loop conversion system, this “Flex”
adapter has the capability to convert any disc sander into an extremely
durable cushioned sander that will contour around any round over, chair leg,
table edge or anything with shape and not leave flat spots.
With the use of our hook
and loop conversion discs,
or an existing sander with
a hook and loop system,
you can make use of
this remarkable product.
Basically, it’s a double
density foam pad with
hooks on one side and
loops on the other. Works
great on disc sanders for
shaping and moulding
wood for intarsia and other
projects.
We use Velcro® Brand Hook & Loop fastening system
Hook & Loop Accessories
Hook and Loop Back‑up Pads
Made of a high density sponge, these 2” and 3” diameter flexible hook and
loop sanders are really gaining popularity, especially with woodturners. Using
premium Klingspor discs, you can get right into the bottom of bowls, small
vessels or all kinds of hard to sand areas and sand a finish you’ll be amazed
with. For even greater flexibility, consider
adding a 2” or 3” Flex Adapter (see pg.
22). (See page 21 for 2” and 3” Hook and
Loop Discs). The 5” Firm Hook and Loop
Back-up Pad has an 1/8” layer of foam
and a ¼” shank. Can be used in the
same way as the 2” and 3” as well as with
a flex adapter (see pg. 22). (See page 21
for 5” Hook and Loop Discs)
Item #
Size
Price
CV0020
2”
$13.00
CV0030
3”
$17.50
CV0050
5”
$14.00
Hand Sander
CV4030 $15.99
Make more use of you 3” wide V-Drum
Sander paper with this 3” wide Ergo
hook & loop hand sander. Sanding
face measures 3” x 5”.
8” Face Plate
This hook and loop face plate makes a sander to use on a shaft. Comes in two
sizes. Order ½” or 5/8” depending on the shaft size you require. Attach to any
1725 rpm motor but check shaft size before ordering. (See page 21 for 8” Hook
and Loop Discs).
Item #
Size
Shaft Size
Price
DR5023
8”
1/2”
$22.99
DR5024
8”
5/8”
$22.99
Shape System
New
Now you can turn a motor into a wonderful shaping tool. We’re happy to
introduce this BRAND NEW product, we like to term “Soft Gold”, to our
customers. These long lasting, foam backed, golden discs come in 5” and
8” sizes and will attach to any hook and loop system. We also carry kits
where you have to option of creating your very own shape system which
includes 4 sanding discs 1 of each grit. The system may be mounted
on a 1725 rpm motor. PLEASE NOTE SHAFT SIZE OF MOTOR WHEN
PLACING ORDER.
Item # ½” shaft
Item # 5/8” shaft
Description
Price
BUSH512
BUSH558
5” Shape System
$49.95
----
----
5” Soft Gold Refill*
$3.95
BUSH812
BUSH858
8” Shape System
$49.95
----
8” Soft Gold Refill*
$6.95
----
*Grits available – 80, 120, 180, 220
All prices quoted are in Canadian and US dollars
55
Sanding Discs - PSA
Paper Backed
PSA Discs
These 5” & 6” discs are used for both woodworking and
metal working applications on random orbit sanders.
Made from the same material as Klingspors’ hook and
loop discs everyone has grown to love ‑ a premium
product that stands up to the hardest hardwoods,
doesn’t load up with pine and spruce, and stands up
really well to painted or varnished surfaces and light
metal work. The best stearate coated sandpaper for the
money you’ll ever use!
Disc Size Pkg, Qty.
*80 grit
*120 grit
Pkg. Qty.
40 grit
60 grit
*80, 100, *120, *150, *180, *220,
240, 280, 320, 400, 500, 600 grit
5” x 0
10
$4.99
$4.99
100
$70.00
$61.00
$42.00
6” x 0
10
$5.99
$5.99
100
$79.00
$65.00
$48.00
Red Cloth PSA Discs
All of these discs are made from a semi‑open
coat, full resin bonded aluminum oxide cloth
backed material, with a premium adhesive backing. An
industrial quality disc, exceptional for both hardwoods
and softwoods. Fantastic selection of grits to choose
from. For longer disc life use in conjunction with an
abrasive cleaner found on page 28.
‑‑Package Quantities are ONE grit only‑‑‑
Disc
Size
Pkg,
Qty.
*80 grit
*120 grit
Pkg.
Qty.
24 grit
36 grit
40 grit
50 grit
60 grit
*80, 100, *120, 150,
180, 220, 240, 280,
320, 400, 500, 600 grit
5” x 0
1
$1.75
$1.75
10
$22.00
$20.00
$18.00
$17.00
$16.00
$16.00
6” x 0
1
$2.50
$2.50
10
$32.00
$28.00
$27.00
$25.00
$24.00
$23.00
8” x 0
1
$4.50
$4.50
10
$57.00
$51.00
$48.00
$47.00
$44.00
$42.00
9” x 0
1
$5.25
$5.25
10
$73.00
$64.00
$61.00
$57.00
$53.00
$49.00
10” x 0
1
$6.50
$6.50
10
$89.00
$77.00
$73.00
$70.00
$66.00
$59.00
12” x 0
1
$9.50
$9.50
10
$127.00
$114.00
$107.00
$102.00
$95.00
$91.00
56
Sheets
Garnet Sheets
We are adding these sheets to our lineup because many of our woodworking
customers prefer sanding with garnet. Garnet is great for sanding on a bare
wood surface and is particularly useful for producing a smooth finished surface.
Garnet should only be used for sanding bare wood.
9” x 11”
Garnet
50 pc
sleeve
36 grit
40 grit
50 grit
60 grit
*80 grit
*100, *120, *150, *180,
*220 grit
$67.00
$53.00
$46.00
$39.00
$35.00
$23.00
*Grits in stock. For other grits, allow for a 2 ‑ 3 week delivery.
Stearate Coated Sheets
Premium quality Klingspor sheets. Their non‑loading action will outperform most other
sandpapers on the market today. Superb performance on both hard and soft woods as well
as light metal work. Identical paper as the Klingspor hook and loop discs (pg. 21). The
best stearate coated sandpaper for the money you’ll ever use! Also available in hook and
loop sheets (below).
‑‑‑Sleeve contains ONE grit only‑‑‑
9” x 11”
Stearate Coated
40 grit
*60 grit
*80, *100, *120, *150,
*180, *220
240, 280, *320, 400,
500 or 600 grit
50 pc sleeve single grit
$50.00
$45.00
$36.00
$36.00
10 pc single grit
---
---
$8.50
---
Hook & Loop
Stearate Coated Sheets
The same non-loading sanding sheets as advertised above with an added hook and loop
backing. Superb performance on both hard and soft woods as well as light metal work.
Identical paper as the Klingspor hook and loop disc (pg. 21). Also available with plain
backing (above).
9” x 11”
Stearate Coated
80 grit
100 grit
120 grit
180 grit
220 grit
Variety pkg.
2pc each grit
10 pc
hook & loop
$18.99
$18.99
$18.99
$18.99
$18.99
$18.99
Wet/Dry Sheets
Silicon Carbide paper backed sheets. Applications for this paper could include very fine
finishing for turnings, sharpening and knife making, on glass and the automotive market.
Excellent where a perfect finish is necessary. Each sleeve contains 50pc wet/dry
sheets.
‑‑‑Sleeve contains ONE grit only‑‑‑
9” x 11”
Wet/Dry
60
grit
80
grit
100
grit
120
grit
150
grit
180
grit
220, 240, 280, 320, *400,
500, *600, *800, *1000,
*1200, *1500 or *2000 grit
50 pc sleeve
$75.00
$67.00
$59.00
$49.00
$49.00
$49.00
$43.00
57
Sanding Belts
At Stockroom Supply, we provide our customers with the
most economical yet highest quality belt with freshness
guaranteed. All of the Klingspor belts listed in this catalogue
are an industrial quality, semi‑open coat, aluminum oxide
cloth backed belt. These belts can be used on any type of
wood and light metal applications.
elt size
Your b ed?
t
not lis call!
sa
Give u
Belts for
Portable
Sanders
*Sizes and grits usually in stock.
All others allow for 2 to 3 weeks.
Pkg, Qty.
40
50
*60
*80
*100
2-1/2” x 16”
10
$24.00
$22.00
$22.00
$21.50
$21.50
3” x 18”
10
$25.50
$24.00
$24.00
$20.00
$20.00
3” x 20”
10
$29.00
$27.00
$27.00
$25.00
$25.00
*3” x 21”
1
----
----
$1.90
$1.90
$1.90
*3” x 21”
10
$29.00
$27.00
$17.00
$17.00
$17.00
*3” x 24”
1
----
----
$2.00
$2.00
$2.00
*3” x 24”
10
$30.00
$28.00
$18.00
$18.00
$18.00
*4” x 21”
1
----
----
$2.25
$2.25
$2.25
*4” x 21”
10
$36.00
$32.00
$20.00
$20.00
$20.00
4” x 21-3/4”
10
$36.00
$32.00
$30.00
$30.00
$30.00
*4” x 24”
1
----
----
$2.25
$2.25
$2.25
*4” x 24”
10
$37.00
$33.00
$20.00
$20.00
$20.00
Belts for
Bench Top
Sanders
Belts for
Stroke
Sanders
58
Belt Size
Belt Size
Pkg, Qty.
40
50
*60
*80
*100
*1” x 30”
10
$19.00
$18.00
$18.00
$18.00
$18.00
1” x 42”
10
$22.50
$20.00
$20.00
$19.00
$19.00
*4” x 36”
1
----
----
$4.00
$4.00
$4.00
*4” x 36”
10
$58.00
$54.00
$36.00
$36.00
$36.00
*6” x 48”
1
----
----
$7.75
$7.75
$7.75
*6” x 48”
10
$110.00
$99.00
$72.00
$72.00
$72.00
6” x 60”
10
$159.00
$137.00
$137.00
$125.00
$125.00
6” x 80”
6
$108.00
$93.00
$93.00
$84.00
$84.00
Belt Size
Pkg, Qty.
40
50
60
80
100
6” x 89”
6
$118.00
$99.00
$99.00
$91.00
$91.00
6” x 108”
6
$137.00
$116.00
$116.00
$104.00
$104.00
6” x 264”
6
$325.00
$263.00
$254.00
$232.00
$232.00
To accurately measure belt size, cut old belt and measure the width & length
Sanding Belts
A tip from Paul...
Did you know all these belts can run in EITHER direction?
All the belts that are listed here are joined with a “Butt Splice”, in which the belt ends are butted together and joined
by high strength tape on the underside of the joint. This allows the belt to run in either direction for greater belt life.
*120
*150
180
*220
240
280
320
400
500
600
$21.50
$21.50
$21.50
$21.50
$21.50
$21.50
$21.50
$21.50
$21.50
$21.50
$20.00
$20.00
$20.00
$20.00
$20.00
$25.50
$25.50
$25.50
$25.50
$25.50
$25.00
$25.00
$25.00
$25.00
$25.00
$27.00
$27.00
$27.00
$27.00
$27.00
$1.90
$1.90
$1.90
$1.90
----
----
----
----
----
----
$17.00
$17.00
$17.00
$17.00
$17.00
$27.00
$27.00
$27.00
$27.00
$27.00
$2.00
$2.00
$2.00
$2.00
----
----
----
----
----
----
$18.00
$18.00
$18.00
$18.00
$18.00
$28.00
$28.00
$28.00
$28.00
$28.00
$2.25
$2.25
$2.25
$2.25
----
----
----
----
----
----
$20.00
$20.00
$20.00
$20.00
$20.00
$38.00
$38.00
$38.00
$38.00
$38.00
$30.00
$30.00
$30.00
$30.00
$30.00
$38.00
$38.00
$38.00
$38.00
$38.00
$2.25
$2.25
$2.25
$2.25
----
----
----
----
----
----
$20.00
$20.00
$20.00
$20.00
$20.00
$38.00
$38.00
$38.00
$38.00
$38.00
*120
*150
180
*220
240
280
320
400
500
600
$18.00
$18.00
$18.00
$18.00
$18.00
$20.00
$20.00
$20.00
$20.00
$20.00
$19.00
$19.00
$19.00
$19.00
$19.00
$24.50
$24.50
$24.50
$24.50
$24.50
$4.00
$4.00
$4.00
$4.00
----
----
----
----
----
----
$36.00
$36.00
$36.00
$36.00
$52.00
$52.00
$52.00
$52.00
$52.00
$52.00
$7.75
$7.75
$7.75
$7.75
----
----
----
----
----
----
$72.00
$72.00
$72.00
$72.00
$89.00
$89.00
$110.00
$110.00
$110.00
$110.00
$125.00
$125.00
$125.00
$125.00
$125.00
$125.00
$125.00
$125.00
$125.00
$125.00
$84.00
$84.00
$84.00
$84.00
$84.00
$84.00
$84.00
$84.00
----
$84.00
120
150
180
220
240
280
320
400
500
600
$91.00
$91.00
$91.00
$91.00
$91.00
$91.00
$91.00
$91.00
----
$91.00
$104.00
$104.00
$104.00
$104.00
$104.00
$104.00
$104.00
$104.00
----
$104.00
$232.00
$232.00
$232.00
$232.00
$232.00
$232.00
$232.00
$232.00
----
$232.00
Need a Special Size Belt? Call for a Quote!
59
Sanding Belt Accessories
Graphite Cloth
Use this heavy canvas backed graphite on the platen of your sander (the flat
part of your sander, covered by a belt and used as a work area).
The slippery surface of the graphite greatly reduces the friction causing
heat build up and will also decrease the drag on your belt sander motor and
bearings.
We provide extra long pieces that can be easily cut to fit any sander. Pads
can be attached with double faced tape, contact cement, spray adhesive, or
screwed in place. Graphite cloth is usually difficult to find, but we always
have this in stock for you! Order some and try it out.
Item #
Size
Price
GR0409
4” x 9” (portable sanders)
$5.99
GR0413
4” x 13” (4” x 36” belt sander)
$7.99
GR0436
4” x 1yd
$11.99
GR0620
6” x 20” (6” x 48” belt sander)
$11.99
GR0636
6” x 1yd
$19.99
Abrasive Cleaning Block
Eventually all belts go dull, but with the use of a cleaner you will greatly extend
their life by removing some of the dust and varnish that plug them prematurely.
To use this 2”x2”x8” crepe block, push cleaner over belt or disc as it is turning.
One block will last a very long time with normal use. A must for EVERY workshop.
Belt Dressing Lubricant
This grease stick is recommended for all belt polishing operations ‑ on all metals
plastics and glass. It is great for sharpening and shaping knives and chisels,
as it will help reduce heat caused by friction on their fine edges. When applied
to the belt, the grease spreads out thinly and remains wet on the belt, while
providing lubrication by penetrating the coated abrasive surface. It will extend
the life of the belt by preventing clogging while leaving the abrasive grit free to
cut cleanly and smoothly.
Item #
Item Description
Price
Z00010
Abrasive Cleaning Block
$10.95
Z00015
Belt Dressing Lubricant
$15.00
A tip from Paul...
10 lb. Bargain Box
Sandpaper New
Belt Storage
You’ll want to keep a box of this
in your shop! Industrial quality
Klingspor sandpapers - ends of
rolls, overruns - each box contains
a mix of grits in coarse, medium
& fine.
Item #
Z00020
60
Item
Description
10 lb.
Bargain Box
Price
$29.95
m windows
be kept away fro
Abrasives should source. They should not
at
and any direct he te floors or near any area
re
nc
co
on
ed
or
orage is at
be st
l conditions for st
ea
Id
s.
(or 18*C
*F
of dampnes
80
nge of 60*F to
a temperature ra idity may cause creasing,
hum
to 26*C). High
ss, while low
emature grit lo
pr
d
an
g
in
load
ittleness and
br
t
uc
use prod
humidity may ca lts can be stored in original
Be
lack of flexibility. ady for use or sealed in an
re
plastic wrap until
r.
ne
ai
nt
co
t
gh
airti
Get the most value for your Sanding Belt investment
Sanding Accessories
Dual Grit Sanding Sponge
4”x2‑3/4”x1” high quality sanding sponges are washable, reusable
and are effective in sanding gentle contoured surfaces or flat areas.
Convenient two grits on each sponge.
‑‑‑Bulk package contains ONE
Item #
Grit
1pc
Bulk 10pc.
Z10021
Med/Fine
$1.89
$15.99
Z10022
Med/Coarse
$1.89
$15.99
Hi‑Flex pads
These 4‑1/2” x 5‑1/2” x 3/16” very flexible pads are some of the newest and best quality foam sanding pads on
the market. They are made from dense foam and evenly coated on one side with Aluminum Oxide grit. This
makes for an extremely long lasting pad that is very flexible for finish sanding on contoured parts and profiles.
‑‑‑Bulk package contains ONE grit only‑‑‑
Item #
Grit
1pc.
Bulk 10pc.
Z10105
60
$1.25
$11.99
Z10107
100
$1.25
$11.99
Z10110
180
$1.25
$11.99
Z10111
220
$1.25
$11.99
Sandflex Block
3”x2”x3/4” A semi‑flexible rubber compound with grit through‑out. This Klingspor block has had experts talking
for years. It’s great for cleaning up woodworking machinery table tops, cleaning
rust and scale from chisels, carving tools, saw blades, and much more. Make
your tools shine like new again! Available in 3 grits.
Item #
Grit
Price Each
$7.49
Z10205
Coarse 60g
Z10207
Medium 120g
$7.49
Z10212
Fine 240g
$7.49
Z10220
1 of each
$21.00
Surface Conditioning Hand Pads
Designed to replace steel wool, these synthetic pads have excellent durability and are available in 3 grits and one super
finisher. These pads will not break down and leave fibres or damaging pieces of iron on your work piece. Great for in
between coat sanding and for wax finishes.
‑‑‑Bulk package contains ONE grit only‑‑‑
Item #
Grit
1pc.
Bulk 10pc.
Z10301
Maroon- Coarse
$1.49
$14.00
Z10302
Grey- Medium
$1.49
$14.00
Z10303
Green- Fine
$1.49
$14.00
Z10304
White- Non-abrasive
$1.49
$14.00
61
Micro-Mesh Products
A high quality product for super fine finishing. Micro-Mesh is a unique cushioned abrasive that produces a very fine and
uniform scratch pattern. The nine grits range from 1500 up to 12000. The 1500 is similar in grit range to conventional 400
grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye. Micro-Mesh
abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop while using
the series.
Introductory Wood Kit
1 - 3”x4” sheet each of 9 Micro-Mesh Regular grades - 1500, 1800, 2400, 3200, 3600,
4000, 6000, 8000, & 12000, a 3”x3” foam block and instructions.
Item #
Description
Price
MS001
Introductory Wood Kit
18.99
MS002
2”x2” Soft Touch Pad
Variety
18.99
2” x 2” Soft Touch pad
variety pack
1 pad each (double sided) of
9 Micro-Mesh Regular grades.
1500, 1800, 2400, 3200, 3600,
4000, 6000, 8000, & 12000.
Outstanding product for pen
turners.
Mac Mops
A very popular Klingspor profile sander, this wheel consists of hundreds of small abrasive strips bonded to a strong epoxy
core. Typical applications include the sanding of turned wood parts, scuff sanding of sealer coats, satin finishing of metal
parts, mold sanding and sanding of virtually any profile.
7” Mac Mop - Spindle Mount
Item Number
Description
Available
80, 120, 180, 240
MAC072
7” X 2” Mac Mop
$52.00
This mop has a 1/4” spindle. No
mounting plates are required.
10” Mac Mop - Spindle Mount
The 10” Mac Mop should be mounted onto stationary machines with motors ranging from 1/2 hp to 3 hp and shafts of at
least 1/2” in diameter. Ideal speeds are between 1,100 and 2,500 rpm and should not exceed 3,400 rpm. Mounting Plates
are sold separately and are required for your first Mac Mop purchase. Arbour hole needs to be specified.
Item Number
Description
80, 100, 120
150, 180, 240
MAC102
10” X 2” Mac Mop
$134.00
$167.00
MAC104
10” X 4” Mac Mop
$245.00
$295.00
*MACPL
Mounting Plates for 10”
Mac Mop
$19.00 per pair
---
* Arbour hole must be specified - 1/2”, 5/8”, 3/4”, 1-1/4”, 2”
Long Life
Tungsten Carbide Tools
1/8” dia. Shaft High Speed (35,000 rpm) Rotary Tools:
1. Shaping Wheel 2. Pointed Burr 3. Asprin Tip
4. Conical Tip 5. Flat Tip 6. Round Tip 7. Ball Tip
8. Hollow Tip 9. Cutting Wheel
Visit our website for prices and listing of all DuraGrit products and kits.
62
Online Demos - www.stockroomsupply.com
Mini Mops
Made from the same outstanding gold
material as the Sanding Mop, the Mini
Mop is an innovative accessory
designed specifically for high speed
rotary tools. This small interlocking flexible
sander will work well with speeds up to 25,000
rpm but works best at 12,000 rpm. With its small diameter and
non-loading stearate coated cloth, this product works very well for wood
working and metal
working applications.
•• maintains detail
•• antique furniture
ed
ne
s
op
ing mops, Mini M e Mini
restoration
th
As with the Sand
ld
Ho
before use.
••
paint
stripping on mouldings
ng
lo
st
to be broken in
ju
p piece of wood
•• sanding carvings and turnings
is
Th
n.
Mop into a scra
fte
so
to
sandpaper
•• removes clear coat, oxide and rust
enough for the
il of your
ntaining the deta
ai
m
•• blends in scratches
in
t
sis
will as
piece.
A tip from Paul...
Mini Mop
Kits
Available in 1” size, each kit
includes a mandrel and 2
discs each in 120 grit, 220
grit and 320 grit.
Item #
Description
Price
MM2000G
1” Mini Mop Kit
$18.00
MM1000
Mini Mop Mandrel
1/8” shaft
(not shown)
$4.00
Mini Mop Refills
Refills are packaged with one grit per package. Package
quantities as listed below. All sizes of Mini Mops fit the same
mandrel.
Bulk
Item #
Description
Pkg Qty
Price
Item #
Pkg Qty
Description
Price
MM2008G
1” Mini Mop
Refill - 120g
5
$14.00
MM2108G
25
1” Mini Mop
Refill - 120g
$45.00
MM2011G
1” Mini Mop
Refill - 220g
5
$14.00
MM2111G
25
1” Mini Mop
Refill - 220g
$45.00
MM2014G
1” Mini Mop
Refill - 320g
5
$14.00
MM2114G
25
1” Mini Mop
Refill - 320g
$45.00
MM3008G
1-1/2” Mini Mop
Refill - 120g
4
$14.00
MM3108G
25
1-1/2” Mini Mop
Refill - 120g
$45.00
MM3011G
1-1/2” Mini Mop
Refill - 220g
4
$14.00
MM3111G
25
1-1/2” Mini Mop
Refill - 220g
$49.00
MM3014G
1-1/2” Mini Mop
Refill - 320g
4
$14.00
MM3114G
25
1-1/2” Mini Mop
Refill - 320g
$49.00
MM3040G
Any 3 Packages
of Refills
---
$35.00
---
---
---
---
A tip froismbePstausuedl...on a small, variable sp1-ee1/d2”roMtainryi
A 1” Mini Mop
lf speed, while
) being run at ha e speed rotary tools (ie:
el
em
Dr
:
(ie
ol
to
bl
ed in larger varia
Mops are best us at half speed.
n
ru
Foredom) being
Works
great
on me
t
a
l
for...
-p
- remo reparation for
buffing
ving clea
r co
- mainta at, oxide, and ru
st
- blendin ining detail
g in scra
tches
“FREE SHIPPING” within Canada and USA on orders over $200.
63
Wood Screws
Cutting Tip Wood Screws
These screws are much like the Jig screws except with a tapered head.
The cutting tip prevents wood from splitting and makes possible easy
driving into hardwood and particleboard.
Item #
#8
#8
#8
1 box
(100 pc)
5 boxes
(per box)
10 boxes
(per box)
1”
1-1/4”
1-1/2”
1-3/4”
2”
HST08125
HST08125
HST08150
HST08175
HST08200
$3.00
$3.40
$3.80
$4.50
$5.00
$2.75
$3.10
$3.45
$4.10
$4.55
$2.50
$2.80
$3.10
$3.70
$4.10
Cup / Finishing Washers
This little trim washer sits under the head of a regular wood screw. Not only does it
look better, but it increases the holding power.
Item #
Size
1 box (100 pc)
5 boxes (per box)
10 boxes (per box)
HW0600
#6
$3.10
$2.80
$2.50
HW0800
#8
$3.90
$3.60
$3.25
HW1000
#10
$5.45
$4.95
$4.45
Pocket / Jig Screws
These
screws
have tremendous
holding
power
and have a self
tapping
wood
auger tip that
virtually eliminates
splitting the wood.
1 box
5 boxes
10 boxes
Bulk
(100 pc)
(per box)
(per box)
(1000 pcs)
Fine Pocket Screws
1-1/4”
$3.30
$3.10
$2.90
$21.95
Coarse Pocket
Screws
1-1/4”
$3.80
$3.60
$3.40
$25.95
Item #
Description
HPF125
HPC125
Square Socket
Driver Bits
Item #
Description
Price Each
10 pc
HB1200
Square Driver Bit
#1 x 2”
$1.79
$15.00
$1.79
$15.00
A Canadian made premium, high quality, one
Square Driver Bit
HB2200
piece driver bit.
#2 x 2”
Buffing
Find supplies for your
buffing hobby online at
Stockroom Supply carries
buffing wheels and buffing
compounds.
64
Wood Screws
Mix &
Wood Match
Screw
Poc
s
Washeket Screws /
&
rs for
5
an
box dis
countsd 10
Square Socket Drive
Zinc Plated Wood Screws
The square drive head on wood screws has been one of the most useful inventions in
the woodworking industry. The square drive system prevents the driver from slipping or
stripping under the highest torques. These are very good quality screws with extra deep
thread for maximum holding power. 100 pc per box.
Item #
#4
#4
#4
1 box
(100 pc)
5 boxes
(per box)
10 boxes
(per box)
Item #
#5
#5
#5
1 box
(100 pc)
5 boxes
(per box)
10 boxes
(per box)
Item #
#6
#6
#6
1 box
(100 pc)
5 boxes
(per box)
10 boxes
(per box)
Item #
#8
#8
#8
1 box
(100 pc)
5 boxes
(per box)
10 boxes
(per box)
Item #
#10
#10
#10
1 box
(100 pc)
5 boxes
(per box)
10 boxes
(per box)
1/2”
5/8”
3/4”
1”
1-1/4”
1-1/2”
1-3/4”
2”
HWS04050
HWS04058
HWS04075
HWS04100
HWS04125
---
---
---
$2.50
$2.65
$2.70
$3.35
$3.75
---
---
---
$2.25
$2.40
$2.45
$3.05
$3.40
---
---
---
$2.00
$2.15
$2.20
$2.75
$3.05
---
---
---
HWS05050
HWS05058
HWS05075
HWS05100
HWS05125
---
---
---
$2.60
$2.65
$2.75
$3.00
$3.65
---
---
---
$2.40
$2.45
$2.50
$2.75
$3.30
---
---
---
$2.15
$2.20
$2.25
$2.50
$3.00
---
---
---
HWS06050
HWS06058
HWS06075
HWS06100
HWS06125
HWS06150
HWS06175
HWS06200
$2.65
$2.75
$2.75
$2.95
$3.30
$3.80
$4.50
$4.90
$2.40
$2.50
$2.50
$2.70
$3.00
$3.45
$4.10
$4.45
$2.15
$2.25
$2.25
$2.45
$2.70
$3.15
$3.70
$4.00
3/4”
1”
1-1/4”
1-1/2”
1-3/4”
2”
2-1/2”
3”
4”
HWS08075
HWS08100
HWS08112
HWS08150
HWS08175
HWS08200
HWS08250
HWS08300
HWS08400
$2.80
$3.10
$3.40
$3.75
$4.50
$5.00
$6.55
$8.15
$17.50
$2.55
$2.85
$3.10
$3.40
$4.10
$4.55
$6.00
$7.40
$15.95
$2.30
$2.55
$2.80
$3.10
$3.70
$4.10
$5.40
$6.70
$14.40
HWS10075
HWS10100
HWS10125
HWS10150
HWS10175
HWS10200
HWS10250
HWS10300
HWS10400
---
---
$4.20
$4.65
$5.25
$6.25
$8.65
$9.90
$20.50
---
---
$3.80
$4.25
$4.75
$5.70
$7.90
$9.00
$18.65
---
---
$3.40
$3.80
$4.30
$5.15
$7.10
$8.10
$16.80
Due to the slip of a screwdriver and a cut to his hand, P.L. Robertson was inspired to invent the square-head or “Robertson”
woodscrew. Robertson was born and raised in Haldimand County, interestingly, just minutes
from Stockroom Supply. He invented the screw in 1908 and was often heard to say “it was the biggest little invention
of the twentieth century”. We are proud of this Canadian inventor!
Fact: 85% of the wood screws sold in Canada are Robertson, while only 10% of the
woodscrews sold in the US are Robertson.
65
The Little RIPPER
Have you ever wondered what treasures lay waiting to be discovered in the firewood
pile, or dreamed about building something out of that special apple tree in the backyard?
The problem most likely hasn’t been figuring out WHAT you would do with it, but
figuring out HOW. R.B.F. Tool Company has just solved this problem
for you by creating something they like to call “The Little Ripper”.
The Little Ripper is a mini-sawmill that will fit on any bandsaw and allow
you to mill almost any logs into boards, all while working in the comfort
of your own workshop. Designed specifically with the craftsman in
mind, this new and innovative product is not only affordable,
but it is also one of the safest applications for your bandsaw.
One distinct quality of this tool is that is serves a dual purpose.
Simply by turning this jig 180 degrees you have transformed your
mini-sawmill into a valuable fence. The Little Ripper is an essential
and practical tool for every workshop.
$
$
$ $ $ $
$$ $
$ $
$
$
Cost Benefit
Features
• Use Common yard trees (i.e. Lilac, Crab Apple, Birch) in your projects
•�Logs, burls, and crotch wood gripped securely
•�Adjusts to become a taper jig
•�5/8” 3tpi blade cuts wet and green wood
•�Cut quarter-sawn lumber and book matched boards
•�Adapts to many shop tools (works in any ¾” x 3/8” mitre slot)
•�Accessories increase log capacity to 14” diameter and 50” length
One of the big concerns for wood workers when buying
a new tool is the cost. Not only does The Little Ripper
allow you to set up your own sawmill for under $500.00
(if you already own a bandsaw), it is going to save you
a substantial amount of money. Let’s face it, wood is
expensive. Even the most common pine and maple can
add up before you know it. We won’t even mention the
exotic woods! With the price of wood today, wouldn’t it
be nice to have something to offset the cost a little? Did
you know - within 4 hours of using your Little Ripper to
mill your own logs, you can have the entire unit paid off
with the custom wood you have created. Now that is an
affordable tool!
See Little Ripper Prices and Little Ripper Blades on following page.
Tufftooth®- Swedish Bandsaw Blades
The Swedish Silicon band has three to four times the blade life of a normal industrial carbon band. They have a five
tooth pattern with minimal set. Every fifth tooth is a straight raker, with a 6.5° hook angle that gives it an incredible
fast cut and smooth finish.
Length
Width
TPI
Price
BL3/16-80-10
Part #
80
3/16"
10
$16.00
BL1/4-80-4
80
1/4"
4
$16.00
BL3/8-80-4
80
3/8"
4
$16.00
BL1/2-80-3
80
1/2"
3
$16.00
BL3/16-93-10
93
3/16"
10
$18.60
BL1/4-93-4
93
1/4"
4
$18.60
BL3/8-93-4
93
3/8"
4
$18.60
BL1/2-93-3
93
1/2"
3
$18.60
BL3/16-98-10
98
3/16"
10
$19.60
BL1/4-98-4
98
1/4"
4
$19.60
BL3/8-98-4
98
3/8"
4
$19.60
BL1/2-98-4
98
1/2"
3
$19.60
BL3/16-105-10
105
3/16"
10
$21.00
BL1/4-105-4
105
1/4"
4
$21.00
BL3/8-105-4
105
3/8"
4
$21.00
BL1/2-105-3
105
1/2"
3
$21.00
BL3/16-131.5-10
131-1/2
3/16"
10
$26.30
BL1/4-131.5-4
131-1/2
1/4"
4
$26.30
BL3/8-131.5-4
131-1/2
3/8"
4
$26.30
BL1/2-131.5-3
131-1/2
1/2"
3
$26.30
66
80” Length - 12” Sears or General International
90-060
93” Length - 14” Delta, Steel City, Grizzly, General
International 90-125, Sears Craftsman and most 14” imports
98” Length - Genteral International 90-150, Grizzly
105” Length - 14” Imports, Delta, Steel City, General
90-125 with height extension
131-1/2” - Most 17” Imports, General, Grizzly
Visit our website for online demos
The Little RIPPER
The Little Ripper
The Little Ripper is a Canadian-made product which is simple and easy to use. It holds
a log securely in place while you guide it through a bandsaw blade. This jig is a must
for anyone who enjoys the challenge of seeing a project through from beginning to end,
especially the hobbyist who wants to build a project with wood not available at their
local wood supplier.
Height Extension
•• Attaches to the back of the Ripper
•• Increases capacity of log size up to 14” diameter
•• Can be used as a jointer for two Little Ripper Units
(either size)
Bandsaw Blades
When re-sawing or cutting straight, we recommend the use of these new 5/8” Tungsten Impregnated
Silicone Blades. They will make the cut cleaner and faster than normal bandsaw blades. They come
in different sizes to fit your bandsaw. Please specify what size you need when ordering.
•• extra hard
•• stays sharp and cuts straight
•• extra wide to add stiffness to blade
•• extremely smooth, thin kerf
•• 3 tpi
when used with high performance package (balanced pulleys and linkbelt), blade will be fast cutting
and smoother finish will result
Item Number
Description
Price
RBF1000
The Little Ripper 14”
$219.00
RBF1010
Height Extension 14”
$60.00
BL50893
5/8” Tungsten Silicon Blade – 93”
$36.00
BL58105
5/8” Tungsten Silicone Blade – 105”
$36.00
Use as a
mini sawmill
Turn it around and use it
as a fence
Log Capacity Chart
Item(s)
Maximum
Diameter
Maximum Length
Little Ripper
8”
24”
Little Ripper with Height Extension
14”
24”
We bring you woodworking’s newest innovative products
67
V-Drum
Sander pg 7
Moulding
Sander pg 19
Wood
Screws pg 33
Hook &
Loop Discs
pg 21
Sanding
Mops pg 16
Roto
Raspa pg 19
Little
Ripper pg 34
Feather
Wheels pg 11
1-877-287-5017
53032 Perry Rd.
Wainfleet, ON Canada
L0S 1V0
68
Addressed
Admail
Médiaposte avec
adresse
3818691

Stockroom`s Favourite

Transcription

Similar documents

View Nickels Catalog - Nickels Performance

Musterseite_A3-Prospekt:MR300 series

Articulated Hollow Flatwing

lror"**rW - Neighborhood House Association

CUT 6220

Simple Toe-Nail Cutting Service Leaflet March 2013

Extreme curve cutting speed

Gun-Style Infrared Thermometer with Dual Laser Sighting 422 / 423

Touch the Champion!

Super 100 Large Capacity Chain Hoist (16 to 50 ton capacity)