Catalogue - Landis International

Transcription

Landis International
Product Catalog
INTERNATIONAL
Shoe Repair
Finishers
S-755 Finisher
L560 Finisher
SKU: L560
SKU: LANDISS755
Features
• Bag shaker
• Adjustable Mini Belt
• 50 mm Heel Breaster
Option
• Front access belt release
• Led light system
• On casters for easy back access
• (2) x 4’’ belt
• One 3’’ x 59’’ and one 1 1/2’’ x 59’’
Sanding Belts with Belt Scrapers
• 6 manual revolving Brushes
• Direct Drive Blower with Dust Drawer
• Adjustable Top Lift Trimmer with Carbide Cutter
• Adjustable Sole Trimmer with Carbide Cutter
• Adjustable naumkeg
• Bag Shakers
• Heel breaster on bayonet
• One 4’’ x 59’’ Sanding belt
• One 2” x 7” Expanding wheel
Option
• Two brushes on bayonet fitting
• New style of Adjustable Top Lift Trimmer
on bayonet with Carbide Cutter
• New style of Adjustable Sole Trimmer
with Carbide Cutter
• On casters for easy back access
• Direct drive blower dust collection system
• Front access dust collection drawer
Specifications
Specifications
Features
• Dimensions: 59 7/8’’x 32 1/4’’ x 67 1/8’’
• 4 x motors, 230 Volts, 1 phase, 26 Amps, 5 Hp (total)
• Naumkeg Motor 220 Volts
• Dimensions: 38 1/4” x 29” x 63”
• 3 motors, 230 Volts, 1 phase, 17.5Amps, 2.8Hp
S-2000 Finisher
SKU: LANDISS2000ULTRA
Features
• Heel breaster
• Two quick-change belts, one 1-1/2” x 59” and one 4” x 59”
• One sanding wheel, 2-1/2” x 6”
• One sanding wheel, 1-3/8” x 5” B-shaped on bayonet fitting
• Two horsehair brushes
• Two leather burnishers or laminated cloth wheels
• Edge iron friction heater
• Quick-adjust 28 iron sole trimmer (Carbide optional)
• High Speed Adjustable 18mm heel trimmer (Carbide optional)
• Built-in precision cutter sharpener
• Adjustable naumkeg
• Two front access dust collection drawers
• Six single phase motors with five control switches
Specifications
• Dimensions: 79” x 32’’ x 66’’
• 230 Volts, 4Hp, 1 Phase, 26.6Amps
1
landisinternational.ca
Orthopedic
Sanders
S-402 Sander
S-500 Sander
SKU: LANDISS402
Features
SKU: LANDISS500WH4
• 1 x sanding belt 4” x 59”
• 1 x sanding drum 4” x 3’’
with interchangeable bayonet
• Sanding belt scrapers for efficient dust control
• Removable dust baG
• 1 X Horsehair brush on changeable baynet
• Dust collection system with direct drive motor
• Easy access to sanding belt
Specifications
• Dimensions: 30” x 32’’ x 63’’
• 230 Volts, 12.7 amp, 2 HP, 1 phase
Features
• 1 x Heel breaster
• 1 x Horsehair brush, each
on bayonet fittings, for quick
change to other optional attachments
• Two downard sanding belt 4” x 59”
• Easy front access to sanding belts
• Available with or without hoods
Specifications
• Dimensions: 44” x 32’’ x 63’’
• 230 Volts, 8.3 amps, 2 HP, 1 phase
S-6002H sander
SKU: LANDISS6002H
S-6002H3 sander
SKU: LANDISS6002H3
(can accommodate 2 workers)
Features
• I x Scotch Brite Wheel on bayonet
• 1 x HeelBreaster on bayonet
• Powerful 2 HP sander motor
• 3/4 HP direct drive dust collector motor
• 2 x 4” x 59” sanding belts with easy access
• Available with or without hoods
Specifications
• Dimensions S-6002H: 39’’x 32’’ x 63’’
• Dimensions S-6002H3: 50”x 32’’ x 63’’
• 230 Volts, 1 phase, 12.7 amps, 2 Hp
2
Orthopedic
Sanders
P-220 Mobile Sander
WorkMaster 1000
Features:
Features
SKU: P220
SKU: GP220
• 2,000 RPM
• Direct drive blower creates
powerful suction
• Interchangeable bayonet shafts allow a variety
of different grinding wheels on the right side
• 2 x Expanding Wheels 4” x 6’’on bayonet fitting
• 1 x Expanding wheel 4’’ x 3’’
on the left side
• 1 x Grenade on bayonet fiftting
on the right side
• Direct drive blower creates powerful suction
• Dust collector system with dust bag
• Interchangeable bayonet shafts allow
a variety of grinding accessories
Specifications
• Dimensisons : 36” x 36” x 57”
• 230 volts, 15 Amps, 3Hp, 1Phase
Specifications:
• 25’’ x 30’’ x 53.5’’
• 230Volts, 7.4 Amps, 1Hp, 1Phase
Grind Pro Disc
SKU: GPDISC
Grind Pro Dual
SKU: GPDUAL
Features
• Less than 914mm (3’) of space required
• 2,000 RPM
• Direct drive blower creates powerful suction
• 1 x Fix Pneumatic Sanding drums 7’’ x 3’’
• 1 x Fix Sanding disc 305mm (12’’)
Specifications
• Dimensions: 57’’ x 30’’ x 24’’
• 230Volts, 15 Amps, 3Hp, 1Phase
3
Ortho & Shoe Repair
Workbench 26’’
SKU: WBH26
Workbench 36’’
SKU: WBH36
Features
• Drawer
• Compressor switch and inlet
• Perfect for extra working space, to add
a sole press or any bench machine
Specifications
• Dimensions:
26” x 25’’x 35’’ (26’’ Work Station)
36” x 25’’ x 35’’ (36’’ Work Station)
Complete Orthopedic Work Station
SKU: WBOPC
Work Bench
Workbench 36’’
with Fume Buster
SKU: WBH36
Workbench 48’’
with Fume Buster
SKU: WBH48
Features
• Drawer
• Fume Buster
• Selfs
• Compressor switch and inlet
• Perfect for extra working space
Specifications
• Dimensions:
36” x 25’’x 35’’ (36’’ Work Station)
48” x 25’’x 35’’ (48’’ Work Station)
Custumize you perfect
Workbench!
We can costumize your Workbench to
meet your needs, lab or workshop size,
style, features and color.
Please specify your needs and we will
prepare a quote for you.
The complete 4 pieces
wall unit includes
• 1 x Dual Vacuum Press
• 1 x Gast Vacuum Pump
• 1 x 48’’ Work Sattion
• 1 x 18’’ Fume Buster
Specifications
• Dimensions: 48”x 30’’ x 62 1/2’’
• 120 Volts, 3.8 Amps, 1/4 HP, 1Phase
4
Orthopedic
Mini grinders
Mini Grind Pro VS
Supermini Grind Pro
Features
Features
SKU: MGVS
• Variable speed motor 2000 to 3900RPM
• Built-in fan self-contained dust removal system
• 1 x Sanding wheels 102 x 76 mm (4’’ x 3’’)
on removable bayonet fitting
Specifications
SKU: SUPERMINI
• Variable speed motor 2000 to 3400RPM
• 1 x Sanding wheels 102 x 76 mm (4’’ x 3’’)
on removable bayonet fitting
• Built-in fan self-contained dust removal system
• Only 30 pounds, it make it easy to carry
• Dimensions : 36” x 23’’ x 24’’
• 115 Volts, 15 amps, 1/2 HP
• Also Avilable 230 Volts, 1 or 3 phases
Specifications
Dual Mini Grind Pro
Adjustable Stand Mini Grinder
SKU: DUALMGVS
SKU: MGP34BASEADJ
Features
Features
•Variable speed motor 2000 to 3900RPM
• 2 x Sanding wheels 4’’ x 3’’,
1 fix and 1 removable bayonet fitting
• Include exhaust ports ready to connect to
your vacuum system.
• Compact design with handle
• ***This model do not include any
Dust removal system***
• Dimensions: 32”x 20’’x 25’’
• 110 Volts, 1 Phase, 3.5 Amps, 1/3 HP
•Compatible with all of the Landis
Mini Grinders Series
• Adjustable on height
• From 30’’ to 51’’
Specifications
• Dimensions: 33’’ x 17’’ x 14”
• 115 Volts, 15 amps, 1/2 HP
• Also Avilable 230 Volts, 1 or 3 phases
5
Orthopedic
You need this attachement
Mini Grinder Accessories
For those Accessories
Bedding rubber cone
Small tapered rubber
sanding cone 4’’ x 1’’
SKU : RCS
2 1/2’’ X 1 3/4’’
SKU : GRENADE
Small Sanding cone,
24, 40, 80, 100 and 120 grits
SKU : RCS(24,40,80,100 or 120)
US straight female bayonet
with Threaded extension
SKU : TSF31213
Grenade cover 40 grits
SKU : 86162070
Medium tapered rubber
sanding cone 4’’ X 1 1/2’’
SKU : RCM
Grenade cover 80 grits
SKU : 86162080
Medium Sanding cone,
24, 40, 80, 100 and 120 grits
SKU : RCM (24,40,80,100 or 120)
Grenade Diamond
SKU : GRENADED
Large tapered rubber
sanding cone 4’’ X 2’’
SKU : RCL
Scotch brite polishing
cone adapter
SKU : A162
Large Sanding cone,
24, 40, 80, 100 and 120 grits
SKU : RCL (24,40,80,100 or 120)
Scotch brite polishing
cone 4’’ X 1’’
SKU : A163
Mini scotch brite
w/arbor 1’’ x 1’’
SKU : AMSBWC
Tungsten conical
rasp
SKU : MRC14
Mini scotch brite
refil 1’’ x 1’’
SKU : MSBW11
Tungsten pineapple
rasp
SKU : MRP14
3/8’’ Drill chuck with
key Adapter
SKU:CD38B
Mini rubber cone on
1/4’’ shaft 1 1/2’’ x 3/4’’
SKU : 86162050
Tungsten straight
rasp
SKU : MRS14
Mini cover 80 grits
SKU : 79106680
No attachement needed
4’’ X 3’’ Expanding
Sanding drum on bayonet
SKU : 317862B
Sanding drum only
SKU : 317862
Sandpaper Sleeves
Available in 24, 40, 80, 100
and 120 grits
SKU : 4938 (24, 40, 80, 100 or 120)
50 mm Breaster sanding cone
SKU : MGP10754A
4’’ Wire brush
SKU : 3WBB
6
Shoe Shine Valets
Ortho & Shoe Repair
Personal Valet
Office Valet
Features
Features
Specifications
Specifications
Mini Valet
Executive Valet
Features
Features
SKU: SSVPERSONAL
• 1 Cleaning Brush 6" X 3"
• 2 Yarn Mops 6" X 3 1/2"
• Hand polish applicator
• Removable Rubber Mat
• Dimensions18” x 12” x 11”
• Motor 1/4 HP, 115 volts
• Weight 31 lbs
SKU: SSVMV
• 2 Yarn Mops 6” X 3 1/2”
• Cream Dispenser
Specifications
• Dimensions 18’’ x 13’’ x 31’’
• Motor, 1/4 HP, 115 volts,
3.8 Amps, 1 Phase
• Weight: 65 lbs
Sole Cleaner Valet
SKU: SSVSSV
Features
•1 nylon brush
Options
SKU: SSVOFFICE
• 1 Cleaning Brush 6" X 3"
• 2 Yarn Mops 6" X 3 1/2"
• Cream Dispenser
• Dimensions 24” x12” x 39”
• Motor, 1/4 HP, 115 volts
• Weight: 46 lbs
SKU: SSVEXEC
• 1 Cleaning Brush 8” X 3”
• 2 Yarn Mops 8” X 4”
• Cream Dispenser
• Locked Storage
Compartment
Specifications
• Dimensions 24’’ x 18’’ x 35’’
5.9 Amps, 0.33HP, 1 Phase
Please mention the
chosen color:
• Silver: MM360
• Gold: YM244
• Also available with side
cleaning brushes
• Steel Grey: MM143
Specifications
• Light Grey: BM004
• Dimensions 18’’ x 13’’ x 31’’
0.17 HP, 1 Phase
• Weight: 120 lbs
7
• White: GN786699
Polishing Units
Ortho & Shoe Repair
B6 Bench Top Brush Unit
B4 Bench Top Brush Unit
SKU: LANDISB6B
SKU: LANDISB4B
Features
Features
Specifications
Specifications
Base for B6 Brush Unit
Base for B4 Brush Unit
• Wall or bench mounted
• Sealed bearings never need oiling
• Shaft machined for quick change bayonet
• Many optional accessories available
• 3 x 203mm (8” ) yarn brushes
• 3 x 203mm (8” ) horsehair brushes
• Deep shelf holds many pairs of shoes
•Wall or bench mounted
• Sealed bearings never need oiling
• Shaft machined for quick change bayonet
• Many optional accessories available
• 2 x Yarn brushes 8’’ x 2’’
• 2 x Horsehair brushes 8’’ x 2’’
• Deep shelf holds many pairs of shoes
• 4 brush Unit On stand: 24’’ x 17.5’’ x 51’’
• 4 Brush Unit Bench Top: 26’’ x 19’’ x x 16.5’’
• 115 Volts,6.8 amps, .33Hp
• 6 brush Unit On stand: 40’’ x 19’’ x 51’’
• 6 Brush Unit Bench Top: 40’’ x 19’’ x 16.5’
• 115 Volts,6.8 amps, .33Hp
SKU: B4STAND
SKU: B6STAND
Base with doors for
B4 Brush Unit
SKU: B4STAND1
SR-250
SKU: SR250
Features
• 3 Horsehair brushes
• 2 Stitched Cloth Wheels
• ATCO fittings on right end of shaft
• 1/2 HP motor 115 Volts
• 2 Storage shelves
• 2 ink pots
• Dust collecting system with dust bag
• Powerful 1200 CFM Blower System
Specifications
• Dimensions: 34’’ X 25’’ x X 63’’
• 115 Volts, 11 amps, 1 HP, 1 phase
8
Shoe Repair
Insole & Outsole
Stitchers
New Besser McKay Insole
Stitcher
SKU: MCKAY
Rebuilt Outsole Stitcher
Landis K
Features
Features
• Hand and foot mechanism to
raise presserfoot
• For thin and thick 1” materials
• Tension adjustment knob up front
• Improved threading accessibility
• Horn can be locked in place
• Adjustable stitch length
Specifications
• 24” W x 65’’ D x 21”H
• Net Weight: 440 Lbs
• Voltage: 115 Volts
SKU: LANDISK
• For thin and thick 5/8”
materials
• Perfect for long-soles
• The stitching needle comes
in from above
• Can sews into rubber soles
• Foot mechanism
to raise presserfoot
Specifications
• 35” W x 61” H x 35” D
• Voltage: 115/230 Volts
Rebuilt Outsole Stitcher
Landis L
Parts also available
upon request!
SKU: LANDISL
Features
• For thin and thick 5/8”
materials
• Perfect for long-soles
• The stitching needle comes
in from above
• Can sews into rubber soles
• Foot mechanism
to raise presserfoot
Specifications
• 32” W x 61” D x 30” H
• Voltage: 115/230 Volts
9
Orthopedic
Mole VSP2
SKU: MOLEVSP2
Carvers
Accessories for Mole VSP2 & Bench Carver SBC34
Rubber sanding tube 7’’ x 3’’
SKU : TRR7123
Sanding tube 24 grits
SKU : 27877824
SKU : 27877840
SKU : 27877860
SKU : 27877880
SKU : 278778100
Features
• Electric foot switch
• 1 HP motor
• 18” x 18” base
• 18” arm
• Variable speed 0-3400 RPM
• Crank handle for quick and easy adjustment
• Adjustable suction funnel
Specifications
• Dimensions: 36” x 28’’ x 61’’
• 115 Volts, 3.2 amp, 1 HP, 1 phase
Optional
• Rubber Sanding Tubes
Pegged tool tray for Mole
SKU: PEGTRAYM
Small tapered rubber sanding
cone 4’’ x 1’’
SKU : RCS
Small Sanding cone,
24, 40, 80, 100 and 120 grits
SKU : RCS(24,40,80,100 or 120)
Medium tapered rubber sanding
cone 4’’ X 1 1/2’’
SKU : RCM
Medium Sanding cone,
24, 40, 80, 100 and 120 grits
SKU : RCM (24,40,80,100 or 120)
Large tapered rubber
sanding cone 4’’ X 2’’
SKU : RCL
Large Sanding cone,
24, 40, 80, 100 and 120 grits
SKU : RCL (24,40,80,100 or 120)
Adjustable Suction Funnel for Mole
SKU: MOLEAFS2
Foot Switch with Wire
SKU: 893100000
10
Orthopedic
Carvers
Proflex Flexible Cable with motor
SKU: SPROFLEX
Bench Carver
Features
• Adjustable tilt and height stand
• Pre-drilled base for bench mounting
• 305mm (12”) tapered shaft with 1/2”-13
threaded end
• 1/2 HP, 115 volt, low-torque safety motor
• Works with all trautman accessories
Dimensions
• Dimensions : 24’’x10’’x 17’’
• 115 Volts, 8.4 amps, 1 phase1/2HP
Compatible wiith all of the
Accessories available for the
Mole VSP2
SKU: SBC34
Features
• 1/4 HP motor
• 102mm (4’ ) flexible cable
• 1/4” drill chuck with key
• Dimensions: 16’’ x 12’’ x 9’
Bench Carver adjustable Stand
SKU: SBCSTAND
Accessories for Proflex
Tungsten conical rasp
SKU : MRC14
Tungsten pineapple rasp
SKU : MRP14
Tungsten straight rasp
SKU : MRS14
Mini scotch brite w/arbor 1’’ x 1’’
SKU : AMSBWC
Features
• 1/4 HP motor
• 102mm (4’ ) flexible cable
• 1/4” drill chuck with key
• Dimensions: 16’’ x 12’’ x 9’’
• From 30’’ to 51’’
Mini scotch brite refil 1’’ x 1’’
SKU : MSBW11
Mini rubber cone on 1/4’’
shaft 1 1/2’’ x 3/4’’
SKU : 86162050
Mini cover 80 grits
SKU : 79106680
11
Vacuum Press
Orthopedic
Single Vacuum Press
SKU: SVP
Double Vacuum Press
SKU: SVP1718
Double Vacuum Press
Extra Depth
SKU: SVP1718EDP
Features
Features
Specifications
Specifications
Double Vacuum Flat Press
Vac Tank for Landis Vacuum press
Features
Features
• Unique perimeter air flow allows
a more even distribution of pressure
• Locking handle assures a perfect seal
• New quick-release bladder frame
• Built-in pressure relief valve to protect
vacuum pump
• Dimensions Ins. : 10” x 17’’ x 3’’
SKU: SVP1718FL
• Flat work surface provides for fast,
complete vacuum forming
vacuum pump
Specifications
vacuum pump
• Dimensions Ins. : 17” x 18’’ x 3’’
• Dimensions Ins. : 17” x 18’’ x 6’’ (Extra Depth)
SKU: SVPTK
Increase the speed vacuum pan with
an additional 6-gallon flat tank. Quickly
draw the air from the tank. Unique stackable design that allows the user to stack
a Vacuum press on top of tank to save
on space.
Specifications
• Dimension Ins. : 19’’ x 27’’ x 6’’
• Dimensions Ins. : 17” x 18’’
12
Vacuum Press
Orthopedic
GAST PUMP
SKU: 87R642101RN470
Rubber Bladder
SKU : LATEX116
By square feet
SKU : LATEXSVP1718
Pre-cut 23’’ x 24’’
SKU : LATEXSVP1017
Pre-cut 17’’ x 22’’
Features
• Traditional brown gum rubber 1/16’’ thick bladder
Included on all Gast Vacuum Pumps. One way
valve allows you to turn off pump without losing
suction.
Features
• This model is capable of handling multiple
vacuum pans
• Air cleaner included to filter out dust and
harmful particles that can damage pump
• Exhaust silencer to assure smooth, quiet
operation
• Vacuum pressure gauge
• One way check valve
Silicone Clear Bladder 2 mm
SKU : SILICONEC2MM
By square feet
SKU: SILICONEC2MM
Features
• Ultra Clear Silicone Blader 2 mm
Specifications
• 115 / 220 Volts, 5.7 / 2.8 Amps, 1/2 HP
Grey Silicone Bladder 2 mm
SKU : SRG2MM
Features
• Grey Silicone Bladder 2 mm
13
Ortho & Shoe Repair
Hercules single Pneumatic
Sole Press
SKU: HERCULESSS
Features:
•Lasts Support
• Water Filter
• Adjustable pressure control
• Adjustable speed control
• 12’’x 6’’ conforming sole
cushion
• 6” x 6” flat heel cushion
• 8 pair half sole lasts
• 2 single heel lasts
• With double air connector
1 x compressor
1 x air gun (available in option)
• Runs off air compressor (not included)
Specifications
• Dimensions: 16’’ x 20’’ x 44.5’’
Pneumatic Sole Press
Hercules Double Pneumatic
Sole Press
SKU: HERCULESSSD
With timer
SKU: HERCULESSSDT
Features:
•Lasts Support
• Water Filter
• Quick hand lever for on/off
• Solid weld construction
• 8 pair of half sole lasts
• 2 pair of heel lasts
• (2) 12’’x 6’’ conforming sole
cushion
• (2) 6” x 6” flat heel cushion
• With double air connector
1 x compressor
1 x air gun (available in option)
• Runs off air compressor
(not included)
Specifications
• Dimensions: 17’’ x 20 ‘‘ x 44.5’’
Hercules single Boot
SKU: HERCULESSSB
Hercules Manual
Sole Press
SKU: HERCULES
Features :
• Quick hand lever for
on/off functions
• Long post to be able to press
high boots
(not included)
• 12” x 6” conforming sole cushion
Features
• Oversized hand wheel
requires less strength
• Adjustable sole and heel cushions
Specifications
• Dimensions: 26” x 20’’ x 31’’
Specifications :
• Dimensions:14’’x 20’’ x 53’’
14
Ortho & Shoe Repair
Quick Press
SKU: LANDISQP
Hercules Orthopedic
SKU: HERCULESPNO
Features:
• For all kinds of boots and shoes
• Pressure pad automatically shapes
to shoe
• Pressure adjustment
• Swing arm
• 8 pairs of lasts for soles, including
2 for cowboy boots
• 2 different size heel lasts
• Quick air tools connector
• Quick hand lever for on/off functions
• Built-in last holder compartments
• Adjustable pressure
Specifications:
P2 Double Press
SKU: LANDISDP
Features:
• For all kinds of boots and shoes
• 2 Pressure pad automatically
shapes to shoe
• Timer controlled
• Safety switch
• 8 pairs of lasts for soles, including
2 for cowboy boots
• 2 different size heel lasts
• Quick air tools connector
functions
• Built-in last holder compartments
Features:
(not included)
control
Specifications:
• Dimensions: 20” x 27” x 30”
Full Last option kits for Hercules
Orthopedic Pneumatic Sole Press
Birkenstock Last Kit 7 pairs
SKU: 84237090
Heel Post Press
SKU: PPT
Specifications:
• Dimensions: 18" x 25" x 73"
Full Last option kits
for Hercules Pneumatic Sole Press
Hercules full Sole Lasts Kit
SKU: HERCULESFLSK
Features
• Timer controlled from
1 s. to 10 h.
• Reset button to cancel
the operation
• Pressure pad automatically
shapes to the orthoses
Specifications
• Dimensions: 9’’ x 6’’ x 15’’
15
Ortho & Shoe Repair
Fume Buster Models:
Fume Busters
Fume Buster 92’’
Charcoal filter
FB 3’ Vented
SKU: FBSP92
SKU: FB36
FB 3’ Charcoal filter
SKU: FB36C
FB 4’ Vented
SKU: FB48
SKU: FB48C
FB 5’ Vented
SKU: FB60
SKU: FB60C
FB 5’ Vented, Extra Powerfull, 2 Blowers
SKU: FBUC
FB 5’ Extra Powerfull, 2 Blowers, Charcoal Filter
SKU: FBUCC
Fume Buster models 3’, 4’, 5’
Specifications
• Fume Buster 3’ Vented or Charcoal
37” x 24’’ x 49’’
46’’ x 24’’ x 49’’
59” x 24’’ x 49’’
• 2 speed motor, 115 Volts, 3.8 amps, 1/4 HP, 1 phase
• Spark-proof blower unit
• Vented or filtered model available
Features
Vented or Charcoal
• Fume Buster 92’’ Charcoal
92” x 24’’ x 82’’
• 2 speed motor, 115 Volts, 3.8 amps, 1/4 HP, 1 phase
The Fume Buster Series as been specifically
designed to remove toxic air born chemicals
and odors from your work environment.
The down draft system is highly efficient and
superior in comparison to overhead ceiling
mounted systems. It even suctions fumes
and chemical particles from the surrounding
environment.
All of our Fume Buster can be converted
later into a Vented system if needed, at
low cost
6’’ Conversion kit
Vented to charcoal
SKU: FBVC6
Now comes with a shelf and
plexiglass protective door!
4’’ Conversion
Vented to charcoal
SKU: FBVC4
16
Ortho & Shoe Repair
Fume Busters
Replacement filters
for Space Saver 19”
Space Saver 19’’
Charcoal filter
SKU: FB19
Space Saver 19’’ Vented
SKU: FB19V
Bag of
25 lbs
Fume Buster model
Space Saver 19’’
Prefilter
(Need 1)
SKU: SC401312162
Specifications
• On casters for greater mobility
• Charcoal model only
• 19’’x 18’’x 41’’
• 220 Volts, 2.6 amps, 1/4HP, 1phase
• 2 speed motor, 115 Volts, 3.8 amps,
1/4 HP, 1 phase
Charcoal bag
25 lbs (Need 1)
SKU: CNS188
Charcoal filter
(Need 1)
SKU: CHC
Spray Booth with charcoal filter
Replacement filters
for Spray Booth
SKU: LANDISCSB
Spray Booth vented
SKU: LANDISSB
Protection Filter 12’’x24’’
SKU: FVT1224
Specifications
• 115 Volts
• 25” x 23’’x 24”
Protection Filter
20’’x20’’
SKU: FVT2020
Charcoal Filter for
Spay Booth
SKU: FCFT
Fume Master
Replacement Charcoal Filter
for Fume Master
Specifications
Charcoal Filter for
Fume Master
SKU: FCAFB
SKU: LANDISFM
• 24” x 29’’ x 16’’
• 115 Volts, 3.8 amps,
.1Hp, 1 phase
17
Ortho & Shoe Repair
Fume Busters
accessories
Replacement Filters for Fume Buster
Fume Buster 3’, SKU: FB36C
Bag of
25 lbs
Charcoal filter
(Need 1)
SKU: CHC
Charcoal filter
Replacement
with wing (Need 1) charcoal (Need 1)
SKU: CHCAILE
SKU: CNS188
Prefilter (Need 2)
SKU: SC4016202
Fume Buster 4’, SKU: FB48C
Bag of
25 lbs
Charcoal filter
(Need 1)
SKU: CHC
Replacement
Charcoal filter
with wing (Need 1) charcoal (Need 1)
SKU: CNS188
SKU: CHCAILE
Prefilter (Need 2)
SKU: SC4016202
Fume Buster 5’, SKU: FB60C & Fume Buster 5’, Double Fan, SKU: FBUCC
Bag of
25 lbs
Charcoal filter
(Need 2)
SKU: CHC
Charcoal filter
with wing (Need 1)
SKU: CHCAILE
Bag of
25 lbs
Replacement
charcoal (Need 2)
SKU: CNS188
Prefilter (Need 3)
SKU: SC4016202
Fume Buster 92’’, SKU: FBSP92
Bag of
25 lbs
Charcoal filter
(Need 2)
SKU: CHC
Charcoal filter
with wing (Need 2)
SKU: CHCAILE
Bag of
25 lbs
Replacement
charcoal (Need 2)
SKU: CNS188
Prefilter (Need 4)
SKU: SC4016202
18
Shoe Repair
Bench Machines
Bench Trimmer
Heat Activator
Specifications
Specifications
• 115 Volts
• For a uniform groove
around the sole edge.
• Adjustable edge and depth guide.
• High speed motor with foot switch.
• 115 Volts
• 21” x 16” x 28-1/2”
• 6 x 250 Watts lights
• Timer
Truhone Knife
Sharpening machine
Heat Activator lamp
SKU: LANDISBT
SKU: TRUHONE
SKU: LANDISHA
SKU: LFC
Specifications
• 115 Volts
• Sharpens 15 to 25 knives per hour
SKU: ULTRA90
Twice as Sharp Scissors
Sharpening System
Dowell Puller
Specifications
Ultra 90 Bunion Stretcher
SKU: LANDISATM
19
SKU: ACA1
• 115 Volts
• Sharpens 20 to 30 scissors per hour
Bench Machines
Shoe Repair
Bench Top
Electric Groover
Universal Naumkeg
SKU: NAUMKEGLAN
Specifications
Specifications
Landis LB Jack
SKU: LANDISLB6F
Channeling Machine
Model 15
SKU: LANDISEG
• 115 Volts
• 115 Volts
SKU: CM15
Specifications
• Set of 6 lasts
Landis Hot Nail
SKU: LANDISHN
Specifications
• 115 Volts
Hot Nail Electrodes
SKU: TNCC
Complete Hot Nail
Handle
SKU: MCCC
20
Ortho & Shoe Repair
Stretchers
Shoe Stretcher
Model compact
Shoe Stretcher
Model Ultra 80
Features
Features
Boot & Shoe Stretcher
Model Ultra 80L
Skate Stretcher
Model Ultra 80LH
SKU: COMPACT
• Ideal for smaller workshop
• Stretch Shoes
• Positive widening and
lengthening action
• Right and left lasts to
conform to right and left foot
• Adjustable heel block to
keep stretching where you
need it
• 14 Attachments to make the
system the most efficient
SKU: ULTRA80L
SKU: ULTRA80
• Ideal to Stretch Shoes
lengthening action
need it
SKU: ULTRA80LH
Electric Boot & Shoe
Stretcher Model Ultra 80EL
SKU: ULTRA80EL
Features
• Ideal to Stretch Boots & Shoes
lengthening action
need it
Features
• Ideal to Stretch Skates
lengthening action
need it
Specifications
• 115 Volts
(on electric model)
Calf Stretcher
Model Ultra 70
Manual Boot Stretcher
Electric Calf
Stretcher
Model Ultra 70E
Specifications
SKU: ULTRA70
SKU: ULTRA70E
21
SKU: EMAB
• 115 Volts
• 6 x 250 Watts lights
• Timer
Ortho & Shoe Repair
Plastic and
Leather Cutters
5 in 1 Leather and Plastic
Cutter
SKU: LC51 (NEW)
SKU: LANDIS25 (REBUILT)
Maxi Cutter Leather and
Plastic Cutter
SKU: CC11
The New 5 in 1 Leather and plastic Cutter is one of the
most useful tools for any shop. It’s a welt roller, a sole
cutter, a heel trimmer, an edge beveler and a skiver
all in one unique machine.
The Maxi Cutter with extra long 10’’ throat is the perfect
long arm cutter for orthopedic work. Comes with an
adjustable measuring guide, helps to cut strips faster!
* Optionnal height extender base is available.
* Optionnal height extender base is available.
Base for Plastic and
Leather Cutter
Mini Cutter Leather and
Plastic Cutter
SKU: MC4
Adjustable Base for Plastic
and Leather Cutter
SKU: CC11STANDADJ
With a 4” throat, the Mini Cutter is perfect for orthopedic work. It can be table mounted as shown.
FIX 12” Base for Plastic and
Leather Cutter
SKU: CC11STAND
*Additional height extender base are available.
22
Ortho & Shoe Repair
Sole Trimmer Knife
SKU: CSW109
Sole Cutter Feed
wheel, Lower Shaft
MC4 & CC11
Rodi 61
Feed wheel
SKU: ROS24
Sole Cutter knife,
Lower Shaft
(113/32’’bore)
Feed Wheel
Upper Shaft
Feed Wheel
Upper Shaft
SKU: ROS17
SKU: A110
Sole Cutter knife,
lower Shaft
(15/32’’bore)
SKU: A2110
Blade’s wrench
for MC4,
CC11 &Rodi 61
SKU: MC4T
26 Sole Cutters
Sole Cutter knife
Landis sole
Cutter, Skiver &
Combination
(Old Style)
SKU: CSW109
SKU: BEU70
Sole Cutter knife
23
Sole Cutter Feed
wheel, Lower Shaft
19, 20, 21 & 22
Sole Cutters
SKU: FP102
Landis 25
SKU: CSW106
Landis 24H &
Champion
Sole Trimmer Knife,
Upper Shaft
Plastic and
Leather Cutters
Feed wheel
SKU: MCT55
SKU: A109
SKU: A2109
Sole Cutter knife,
Upper Shaft
SKU: C108
Shoe Repair
Hook & Eyelet Machines
R4 Revolving Machine
SKU: INDEX
N-4 Eyelet Machine
SKU: N42G
Features
• Throat 4 ½”
Specifications
• 3” W x 10 ½” D x 11 ½” H
• Net Weight: 10 lbs
• Shipping Weight: 13 lbs
Opt for a starter kit and take advantage of great rates!
All tools are ready for work!
Quick adjustment
of the turrets for the tool
you desire.
SKU: N42-ESK
Specifications
• Include 1 x N42G Eyelet Machine, 1 x #54, 1 x #52,
1 x #51, Eyelet Die & 1 x GH10 Skate Hook Die
SKU: N42-RSK
• Include 1 x N42G Eyelet Machine,
1 x R33, 1 x R34 & 1 x R36 Rivets Die
Shoe Eyelet Die
• Three sets of eyelet dies
(small, medium and large)
• Small and large hook dies
• Four large size snaps and dies
• Three punches and anvil set
• Net Weight: 17 Lbs.
#54 or AA, SKU: 1054
#52 or OO, SKU: 1252
#51 or Klondike, SKU: 1351
#50 or Klondike, SKU: 1450
Snap Die (4 pieces)
Speed Rivet Die
Skate Hook Die
#33, SKU: R33
#34, SKU: R3412
#36, SKU: R36
Snap 1/2’’, SKU: O80
Snap 5/8’’, SKU: O95
Small, SKU: GH8
Small/Med, SKU: GH9
Large, SKU: GH10
Extar-Large, SKU: GH12
Leather Punch
Steel Anvil
SKU: BASEA
Brass Anvil
SKU: BASE
Grommet or Sheet Die
#00, SKU: S00
#0, SKU: S0
#1, SKU: S1
#2, SKU: S2
#3, SKU: S3
1 mm, SKU: PC10
2 mm, SKU: PC20
2.5 mm, SKU: PC25
3 mm, SKU: PC30
3.5 mm, SKU: PC35
4 mm, SKU: PC40
4.5 mm, SKU: PC45
5 mm, SKU: PC50
5.5 mm, SKU: PC55
6 mm, SKU: PC60
7 mm, SKU: PC70
8 mm, SKU: PC80
9 mm, SKU: PC90
10 mm, SKU: PC100
11 mm, SKU: PC110
12 mm, SKU: PC120
24
Sewing Machines
Flat bed & Patching
Flat bed machine
Flat Bed Sewing Machine
with Walking Foot
SKU : LANDIS206
Flat Bed Sewing Machine with
a 30’’ throat and Walking Foot
SKU : LANDIS206L
Plain sewing machine
for clothing
SKU: LANDIS555
Flat bed compound feed,
heavy duty lockstitch
sewing machine,
throat 20’’,
extra-large bobin
SKU : LANDIS1245L
Patching machine
Paching machine TK29-71,
regular bobbin, short arm
SKU : LANDIS2971
Paching machine TK29-72,
large bobbin, long arm
SKU: LANDIS2972
Paching machine
TK29-73 Regular
bobbin, long arm
SKU : LANDIS2973
25
Sewing Machines
Post, Free Arm and Skiving
Post machine
Post with double wheel
and needle feeding
SKU: LANDIS1247
Post sewing machine
with double wheel and
needle feeding
SKU: LANDIS591
Free Arm machine
Free Arm Heavy Duty
Sewing Machine,
walking foot w/reverse
SKU: LANDIS205
Free Arm Sewing
Machine with Roller
Foot
SKU: LANDIS17
Free Arm Sewing
Machine
with Walking Foot
SKU: LANDIS335
Skiving machine
Leather Skiving machine
w/table and motor
SKU: LANDIS801
26
Claes Patching
Sewing Machine
Claes 20 regular bobin, head only
SKU: 834620
Claes 30 large bobin, head only
SKU: 834630
Specifications
• 34’’ W x 16’’ x 33’’ H
• Net Weight : 79 lbs (head only)
• Crated Weight: 125 lbs (head
only)
• Voltage: 115 Volts
Features
• Long, slender lower arm reaches to the
very end of most open end shoes
• Stitches on heavy material
• Sews in all directions
• 19-1/2” (495mm) arm length
• Bobbin winder with automatic release
• Up to 150 stitches per minute
• 0” - 1/4” stitch length
• Sews up to 1/2” thickness
Optional
• Slide on work table
• Sit down or stand up
motorized stand
Sit Down Stand Close
Patcher with speed
reducer motor
High Stand Close Patcher
with speed reducer motor
SKU: BLSBH
SKU: BLSB
Wooden table for
Claes 20
SKU: 834540002
Wooden table for
Claes 30
SKU: 834540003
Needles for Claes 30 #88
(pack of 10)
100/2 SKU: 882
110/3 SKU: 883
120/4 SKU: 884
130/5 SKU: 885
150/6 SKU: 886
170/7 SKU: 887
190/8 SKU: 888
27
Needles for Claes 10 & 20 #81
(pack of 10)
90/14 SKU: 811
100/2 SKU: 812
110/3 SKU: 813
120/4 SKU: 814
130/5 SKU: 815
140/6 SKU: 816
160/7 SKU: 817
Sewing Machine
Claes Parts
Needle Bar for Claes 10 & 20
SKU: 834612014
Needle Bar for Claes 30
SKU: 834612015
Needle Clamp for Claes 20
SKU: 83452019
Needle Clamp for Claes 30
SKU: 83452022
Needle Plate for Claes 20
SKU: 834613017
Needle Plate for Claes 30
SKU: 834613018
Spring Shuttle for Claes Model
20 & 30
SKU: 84002851
Shuttle Spring Screws for Claes
Model 20 or 30
SKU: 84022878
Pressure foot tension bar
SKU: 834611011
Presser Foot Lifter Holding Block
SKU: 834614009
Claes Needle Bar Tension
Release Fork
SKU: 834614011
Driver Screw for Claes 10/20
SKU: AM25X5DIN965
Claes Presser Foot Lift Handle
SKU: 834614051
Complete Tension
SKU: 834614053
Pressure foot screws
SKU: AL1928
Needle Screw
SKU: AL1982
28
Sewing Machine
29
Claes Parts
Pressor Foot Coarse Teeth
SKU: 20037
Pressor Foot Fine Teeth
SKU: 20037F
Shuttle Driver for Claes 20
SKU: 200715
Shuttle Driver for Claes 30
SKU: 200716
Shuttle for Claes 20
SKU: 84022807
Shuttle for Claes 30
SKU: 84022808
Bobin for Claes 20
SKU: 84003321
Bobin for Claes 30
SKU: 84003324
Take Up Spring for Claes 20 & 30
SKU: 20052
Thread tension post for Claes
SKU:20061
Bobbin Winder Rubber Claes
SKU: 200912
Wire threader
SKU:200121
Driver screws for Claes 20
SKU: AL3126
Thread Tension Adjusting Nut
SKU: MLAL7598
Needles
Sewing Machine
Awls for
Landis 12 Stitcher
(pack of 10)
#43, SKU: 1243A
#45, SKU: 1245A
#47, SKU: 1247A
Needles for
Landis 12 Stitcher
(pack of 10)
#45, SKU: 1245
#47, SKU: 1247
#50, SKU: 1250
Needles for
McKay
DN#5, SKU:DN5
Needles for Rapid E Stitcher
(pack of 10)
#41, SKU: 31741
#43, SKU: 31743
#45, SKU: 31745
#47, SKU: 31747
#50, SKU: 31750
Awls for Rapid E Stitcher
(pack of 10)
#41, SKU: 31741A
#43, SKU: 31743A
#45, SKU: 31745A
#47, SKU: 31747A
Needles for TK or Supreme
17, 51 & 591(pack of 10)
134R 11/75, SKU: 13411R
134R 12/80, SKU: 13412R
134R 14/90, SKU: 13414R
134R 16/100, SKU: 13416R
134R 18/110, SKU: 13418R
134R 19/120, SKU: 13419R
134R 21/130, SKU: 13421R
134R 22/140, SKU: 13422R
134R 23/160, SKU: 13423R
134R 24/180, SKU: 13424R
134R 25/200, SKU: 13425R
Needles for TK or Supreme
206 & 8BL (pack of 10)
134-35, 14/90, SKU: 1343514
134-35, 12/80, SKU: 1343512
134-35, 16/100, SKU: 1343516
134-35, 18/110, SKU: 1343518
134-35, 19/120, SKU: 1343519
134-35, 21/130, SKU: 1343521
134-35, 22/140, SKU: 1343522
134-35, 23/160, SKU: 1343523
134-35, 24/180, SKU: 1343524
134-35, 25/200, SKU: 1343525
Needles for TK, Supreme & Singer
Model 29 Patcher, size 29 X 3
(Pack of 10)
29 X 3 14/90, SKU: 29314
29 X 3 16/100, SKU: 29316
29 X 3 18/110, SKU: 29318
29 X 3 19/120, SKU: 29319
29 X 3 21/130, SKU: 29321
29 X 3 22/140, SKU: 29322
29 X 3 23/160, SKU: 29323
29 X 3 24/180, SKU: 29324
Needles for Adler Large Bobbin
(pack of 10)
100 / 16, SKU: 332100
110 / 18, SKU: 332110
120 / 19, SKU: 332120
130 / 21, SKU: 332130
140 / 22, SKU: 332140
160 / 23, SKU: 332160
180 / 24, SKU: 332180
Needles for TK or Supreme 335
(Pack of 10)
135 x 7, 14/90, SKU: 1351714
135 x 7, 16/100, SKU: 1351716
135 x 7, 18/110, SKU: 1351718
135 x 7, 19/120, SKU: 1351719
135 x 7, 20/125, SKU: 1351720
135 x 7, 21/130, SKU: 1351721
135 x 7, 22/140, SKU: 1351722
135 x 7, 23/160, SKU: 1351723
135 x 7, 24/180, SKU: 1351724
135 x 7, 25/200, SKU: 1351725
Needles for TK or Supreme 6E
(Pack of 10)
16 x 257, 12/90, SKU: 1625712
16 x 257, 14/90, SKU: 1625714
16 x 257, 16/100, SKU: 1625716
16 x 257, 18/110, SKU: 1625718
16 x 257, 19/120, SKU: 1625719
16 x 257, 21/130, SKU: 1625721
16 x 257, 22/140, SKU: 1625722
16 x 257, 23/160, SKU: 1625723
30
Ortho & Shoe Repair
8’’x 2’’, Brown horsehair brush
SKU: P7141
8’’x 2’’, Horsehair brush
on bayonet fitting
SKU: SU1210362 (BROWN)
for Landis, Supreme, Sutton and
Jack Master
8’’x 2’’, Black horsehair brush
SKU: P7142
8’’x 2’’, Horsehair brush
on bayonet fitting
SKU: SU1210363 (BLACK)
Jack Master
Leather Burnisher Straight
SKU: LBS
Leather Burnisher on
bayonet fitting
SKU: SU1210995S
Jack Master
240 x 40mm, Brown Horsehair
Brush
SKU: PBBR
for Power Finisher
240 x 40mm, Brown Horsehair
Brush
SKU: PBBL
for Power Finisher
9’’, Brown Horsehair Brush
SKU: P10184
for Master finisher
Leather Burnisher Curved
SKU: LBC
Leather Burnisher on
bayonet fitting
SKU: SU1210995S
Jack Master
9’’, Black Horsehair Brush
SKU: P10183
for Master finisher
8’’x 2’’, Horsehair Brush & Leather
Burnisher on Bayonet Fitting,
SKU: SU1210362
Jack Master
9’’, Neutral Horsehair Brush
SKU: P10185
for Master finisher
6’’ Welt cleaning brush
SKU: ST6
6’’ Welt cleaning brush on
bayonet fitting
SKU: SU1210369
Jack Master
6’’X 2’’, 1 5/16’’ Hole, Nylon Brush
SKU: 646N
Jack Master
30 mm x 130 mm, Nylon Brush
SKU: PBN
for Power
31
Polishing Wheels
Ortho & Shoe Repair
Polishing Wheels
8’’x 2’’, Yarn brush
SKU: SU1209753
8’’x 2’’, Yarn brush on bayonet
fitting
SKU: SU1210361
Jack Master
4” X 1”, Cloth Wheel on bayonet
SKU: CW31B
Jack Master
8’’x 2’’, Laminated cloth wheel
SKU: SU1201684
8’’x 2’’, Laminated cloth wheel
on bayonet fitting
SKU: SU1210368
Jack Master
5’’x 2’’, Felt Burnisher
SKU: FB5
Jack Master
Laminated cloth Wheel
240 mm x 40 mm
SKU: PLCW
for Power Finisher
8’’x 2’’, Felt Burnisher
SKU: FB8
Jack Master
8’’ x 2’’, Laminated Cloth Wheel
SKU: PCL102
for Master Finisher
Refill for Poli-Fix Wheel
(pack of 10)
SKU: 86111992
Cloth Wheel 240 mm x 40 mm
SKU: P10182
for Master Finisher
Laminated Cloth Wheel 8’’ x 2’’
SKU: SU1201684
Laminated Cloth Wheel 8’’ x 2’’
on bayonet
SKU: SU1210368
for Landis, Sutton, Supreme
32
Ortho & Shoe Repair
Sanding Wheels
5’’ Flat Felt Sanding Wheel
SKU: FS1385
Need 1 Set of 2 cams
SKU: FSC
5’’ x 1 3/8’’Flat Felt Sanding
Wheel on bayonet fitting
SKU: SU1210375
Jack Master
5’’x 1 3/8’’ Cambered
Sanding Wheel
SKU: B1385
SKU: FSC
5’’ x 1 3/8’’ Cambered Sanding
wheel on bayonet fitting
SKU: SU1210376
Jack Master
2 1/2’’ FS Sanding wheel
SKU: FS2125
SKU: FSC
5’’ x 2 1/2’’ FS Sanding wheel
on bayonet fitting
SKU: SU1210371
Jack Master
4 1/2’’ Bottom sander
SKU: BS412
SKU:BSC
4 1/2’’ Bottom sander on
bayonet fitting
SKU: SU1210372
for Landis, Supreme, Sutton
and Jack Master
Set of 2 cams
SKU: FSC
Jack Master
Set of 2 cams
SKU: FSC
for Landis, Supreme, Sutton
and Jack Master
7’’ x 3 1/4’’ Pneumatic contour
sander on bayonet fitting
SKU: SU1210993
Jack Master
Rubber Wheel Mini Belt
SKU: 144703670
for Power Finisher
Rubber Wheel 1” X 1 3/4’’,
3/4’’ hole
SKU: 134134
Jack Master
33
Ortho & Shoe Repair
1’’x 6’’ Hard scotch brite wheel
SKU: SU1207189
Jack Master
8’’ x 1’’ Hard scotch brite wheel
SKU: SU1200429
Hard scotch brite wheel on
bayonet fitting 8’’ x 1’’
SKU: SU1210290
Jack Master
8’’ x 2’’ Hard scotch brite wheel
SKU: SU1200430
Hard scotch brite wheel on
bayonet fitting 8’’ x 2’’
SKU: SU1210291R
Jack Master
Wire brush only
SKU: SU1209756
5’’ Wire brush on bayonet fitting
SKU: SU1210365
Jack Master
5’’X1 1/2’’, Bore 1 5/16’’
Wire Brush
SKU: P3868
Sanding Wheels
6’’ x 1’’ Soft scotch brite wheel
SKU: SBW16
Soft scotch brite wheel on bayonet
fitting 6’’ x 1’’
SKU: SU1210292S
Jack Master
8’’ x 2’’ Soft scotch brite wheel
SKU: SBW28
Soft scotch brite wheel on bayonet
fitting 8’’ x 2’’
SKU: SU1210291S
Jack Master
Flap Wheel (Left side only)
SKU: 86381098
Flap Wheel (Right side only)
SKU: 86381103
2’’ x 1/2’’ Wire brush with Resin
(pack of 2)
SKU: BA212
2’’ x 1/2’’ Wire brush with Resin
on bayonet fitting
SKU: BA212B
34
Ortho & Shoe Repair
6’’ x 4’’ Expanding Wheel
SKU: TW42
Jack Master
4’’x 7”, Felt Contact Wheel
SKU: SU1200422
for Landis, Supreme or Sutton
SKU: TW27
Jack Master
4’’x 7”, Felt Contact Wheel
SKU: SU1200422R
4’’ x 3’’, bore 1 1/4’’
Expanding Wheel
SKU: 317862
Expanding Wheel on bayonet
SKU: 317862B
Jack Master
4” Felt Contact Wheel
SKU: P3839
for Jack Master
4’’ x 3’’ Rubber Wheel
SKU: 31786
Rubber Wheel on bayonet
SKU: 31786B
Jack Master
4” ,Rubber Contact Wheel
SKU: P3839R
for Jack Master
on Bayonet
SKU: SU1210289
Jack Master
6’’X 3’’ Wood & Felt
Contact Wheel
SKU: 140375082
for Power Finisher
1 9/16”, Felt Contact Wheel
SKU: SU1200421
1 9/16”, Felt Contact Wheel
SKU: SU1200421R
35
Contact &
Rubber Wheels
6”X 1 1/2” Wood & Felt
Contact Wheel
SKU: 140375040
for Power Finisher
Ortho & Shoe Repair
Chuck Drill on Bayonet
SKU: CD38B
Bayonets
Spanner wrench needed with
all Landis, Supreme or Sutton
bayonet
SKU: CCL
Bayonet Fitting for Heel
Breaster
SKU: SU1207179
US Tapered Male Bayonet 11’’
(279mm)
SKU: SU1207182
Quick Change Bayonet
SKU: LSPA
for Landis Polishing Machine
Long bayonet for Power Heel
Breaster Cone
SKU: 145010233
for Power Machine
U.S. Straight Male Bayonet
SKU: M7591A
Short bayonet for Power Heel
Breaster Cone
SKU: 145010244
for Power Machine
7’’ Female Bayonet
SKU: SU1207193
US Tapered Female Bayonet
with Threaded Extension,
thread 1/2’’ - 13’’
SKU: SU1210991
Bayonet for Trautman tools
3”,1/2-13
SKU: TSF32213
36
Ortho & Shoe Repair
Heel Breasters &
Naumkeag Head
Naumkeag head complete
1/2’’ shaft
SKU: ANC12
U.S. Diamond heel breaster
40/50 grit
SKU: CDAS
Naumkeag head complete
3/8’’ shaft
SKU: ANC38
50mm Diamond heel breaster
40/50 grit
SKU: CD50
Naumkeag head on bayonet
fitting
SKU: SU1210379
Heel breaster left no groove
SKU: CALH2
Heel breaster right no groove
SKU: CARH2
Or
50 mm cone on bayonet fitting
SKU: SU1210382
Heel breaster left
SKU: CALH
Heel breaster right
SKU: CARH
Or
Heel breaster on
bayonet fitting
SKU: SU1210381
37
Heel breaster no groove
on bayonet fitting
SKU: SU12103812
Ortho & Shoe Repair
Hand Tools
French Shoe Hammer
SKU: MFO
Shoe Store Hammer
SKU: SSH
Popular Magnetic Hammer
SKU: OS222
Magnetic Tack Hammer
SKU: OSMTBA
Drive Tack PullerPoly Handle
#OS200
SKU: DTP
Tack Puller Curved End
SKU: TPCE
Automatic Awl
SKU: OS413
Self centering punch set
SKU: K156
Heavy Revolving Punch
#OS155
SKU: OS15507
Revolving Punch
SKU: OS223
Lasting Pliers #OS233
SKU: OS233
Pincer
SKU: OS93
Heavy Duty Leather Shears
SKU: OS437
Scissors 5 1/2”, 2 1/2 blade
SKU: 5135
Scissors 8” right hand
SKU: 4558RH
Scissors 8” left hand
SKU: 4558LH
Scissors 8” right hand
SKU: 104N
38
Shoe Repair
Heel & Sole Trimmer
Carbide Sole Cutter
#36L, SKU: CCS36
Carbide Cutter #36
#36, SKU: CCTS36
Carbide Heel Cutter
#16, SKU: CCT16
Heel & Sole Trimmer
#36, SKU: A00036
Sole Cutter european Finishers
2 mm, SKU: 202000206
2,5 mm, SKU: 202000250
3 mm, SKU: 202000303
3,5 mm, SKU: 202000350
4 mm, SKU: 202000400
5 mm, SKU: 202000508
6 mm, SKU: 202000600
7 mm, SKU: 202000702
8 mm, SKU: 202000800
9 mm, SKU: 202000907
10 mm, SKU: 202001000
12 mm, SKU: 202001200
14 mm, SKU: 202001400
Sole Cutter California Style,
european Finishers
2 mm, SKU: 202000020C
2,5 mm, SKU: 202000025C
3 mm, SKU: 202000030C
3,5 mm, SKU: 202000035C
4 mm, SKU: 202000040C
4,5 mm, SKU: 202000045C
5 mm, SKU: 202000050C
6 mm, SKU: 202000060C
8 mm, SKU: 202000080C
9 mm, SKU: 202000090C
39
Heel Cutter
#12, SKU: A13012
#14, SKU: A13014
#16, SKU: A13016
#18, SKU: A13018
Sole Trimmer
#2, SKU: B3732
#4, SKU: B3734
#6, SKU: B3736
#8, SKU: B3738
#10, SKU: B37310
#12, SKU: B37312
#13, SKU: B37313
#14, SKU: B37314
#16, SKU: B37316
#18, SKU: B37318
#19, SKU: B37319
#20, SKU: B37320
#22, SKU: B37322
#23, SKU: B37323
#24, SKU: B37324
#26, SKU: B37326
#28, SKU: B37328
#30, SKU: B37330
#36, SKU: B37336
Shoe Repair
Heel & Sole Trimmer
Adjustable Sole Trimmer
SKU: MACKTSA
Trimmer Shield Stationary for
Heel Trimmer
SKU: GLS
Plain Shield
#6, 44 mm , SKU: F33106
#7, 44 mm , SKU: F33107
#8, 44.5 mm , SKU: F33108
#9, 45 mm , SKU: F33109
#10, 45 mm , SKU: F33110
#11, 46 mm , SKU: F33111
#12, 46.5 mm , SKU: F33112
#13, 47 mm , SKU: F33113
#14, 47.5 mm , SKU: F33114
#15, 48 mm , SKU: F33115
#16, 49 mm , SKU: F33116
#17, 49.5 mm , SKU: F33117
#18, 50 mm, SKU: F33118
Trimmer Screw
SKU: 83102220
Groover Trimmer Knife
SKU: CGT
Groover Trimmer Knife & Shaft
Assembly
SKU: CGTCOM
Shaft Micro Groover with collar
SKU: SU9720104
Carbide Groover Trimmer Knife
SKU: 202070018
Groover Trimmer Knife & Shaft
Assembly for Power
Available in Steel or Carbide
SKU: PU319C
Micro Groover collar
SKU: SU9720103
Shaft Micro Groover with
collar for Power
SKU: PU319
Power Stone Trimmer Sharpener
SKU: PSTS
Electric Groover Knife
Adaptor
SKU: ACGE
Sharpening Stone for trimmer
1/2, SKU: MT12
3/4, SKU: MT34
Electric Groover Blade
SKU: SU7109015
40
Shoe Repair
Power & Master Finisher parts
Sanding Belt Motor,
230 Volts, 1 Ph, 1.5 HP
SKU: 5900015
for Power
Sanding Belt Motor
220 Volts, 3 Ph
SKU: 5900010
for Power
Complete sanding binder
assembly left, for 40 mm
SKU: 132004178
for Power
Complete sanding binder
assembly right, for 75 mm
SKU: 132004179
for Power
Contact Wheel Assembly
75 mm
SKU: 132004160
for Power
Contact Wheel Assembly
long hub, 40 mm
SKU: 132004000
for Master Finisher
Press Pad
SKU: 144634201
for Power
41
Sanding Belt Motor
220 Volts, 1 Ph
SKU: P10512
for Master Finisher
Driving Pulley
SKU: P10479
for Master Finisher
Pressure spring sanding belt
SKU: P11243
for Master Finisher
Belt tension hook
SKU: M10339
for Master Finisher
Belt tracking retainer
weldment
SKU:M10357
for Master Finisher
Belt tracking pivot
assembly
SKU: M10358 (M10336A)
for Master Finisher
Sandpaper
Ortho & Shoe Repair
Sanding Sleeves 4’’ x 3’’
Sanding Belt 4’’ x 42’’
24 grits, SKU: 493824
40 grits, SKU: 493840
100 grits, SKU: 4938100
120 grits, SKU: 4938120
24 grits, SKU: 44224A
100 grits, SKU: 442100A
100 grits, SKU: 459100A
120 grits, SKU: 459120A
100 grits, SKU: 365100
Sanding Belt
40 mm x 1650 mm
Sanding Belt 1 1/2’’x 59’’
24 grits, SKU: 40165024A
100 grits, SKU: 401650100A
24 grits, SKU: 1125924A
40 grits, SKU: 1125940A
100 grits, SKU: 11259100A
Sanding Belt for Mini Belt
20 mm x 602 mm
Sanding ring for Mini Rubber
Wheel 1” x 1 3/4”
180 grits, SKU: 260180
SKU: 1134180
Sanding cone
Heel Breaster 80 mm
Sanding cone
Heel Breaster 50 mm
50 mm, SKU: HPSM
60 mm, SKU: HPLA
SKU: HPSM
Naumkeag Pad
Naumkeag Pad
80 grits, SKU: PN80
100 grits, SKU: PN100
80 grits, SKU: PN80A
Much more sizes and models are available, ask our sales team!
42
Ortho & Shoe Repair
Dust Bags
Landis International Dust bags
Dust Bag for SR250SKU: SPB49473
Dust Bag for S 402 SKU: SP402
Dust Bag for S 500 (need 5) SKU: SP500
Dust Bag for S 6002H SKU: SP400
Dust Bag for S 400SKU: SP400
Dust Bag for S 6002H3SKU: SP60036 or SPSR650
Dust Bag for SR452SKU: SPSR452
Dust Bag for SR652SKU: SPSR650
Dust Bag for S 753SKU: SP753
Dust Bag for S2000 (set of 2) SKU: SP2000ULTRA
Dust Bag for L560 SKU: SPL560
Dust Bag for P220 SKU: SP220
Dust Bag for S755 SKU: SP755
Dust Bag for MGVS & MGP34 SKU: SPBGNS
Dust Bag for Super Mini SKU: MINISPBG
Sutton Dust bags
Dust Bag for Sutton 750 Dust Bag for Sutton 2000 Long (6 needed) Dust Bag for Sutton 2000 Long (6 needed)
SKU: SP750
SKU: SP2000L
SKU: SP2000S
Jack Master Dust bags
Dust Bag for Jack Master SKU: P3803
Dust Bags for Jack MasterSKU: P5401
Auto-Soler Dust bags
Dust Bag for Master Finisher SKU: P11201
Dust Bag for Time Master SKU: P7534
Dust Bags for Auto-Soler Time Master Finisher
SKU: P7834
Others Dust bags
Dust Bags for Super Jet Finisher, left side
SKU: 1705374
Dust Bags for American 500 Line Finisher
SKU: 1703784
Dust Bags for Super Jet Finisher, right side
SKU: 1705375
Dust Bags for Champion Service Master
SKU: P5276
Dust Bags for Jet FinisherSKU: 1705377
Dust Bags for Champion FinisherSKU: P5278
Dust Bags for Landis 400S & 450S, 32’’
SKU: 1704743400
Dust Bags for Landis 400, 400A & 450, 37’’
SKU: 1704744400
Dust Bags for Landis 401, 402, 403 & 453, 42’’
SKU: 1704745400
Dust Bags for Landis 404, 404CD, 405 & 454, 60’’
SKU:1704746400
Dust Bags for Landis 400S & 450S, 70’’
SKU: 1704747400
Dust Bags for Landis 400 , 400A & 450, 76’’
SKU: 1704748400
Dust Bags for Landis 401, 402, 403, 404, 91’’
SKU: 1704749400
Dust Bags for Landis 404CD, 405, 453 & 454, 91’’
SKU: 1704749400
Dust Bags for Landis and Champion 150, 37’’
SKU: 1704927150
SKU: 1704926150
SKU: 1704928150
SKU: 1704926150
SKU: 1704929150
SKU: 1704927150
SKU: 1704930150
43
AFT Line
Finishers & Sanders
Primatec 1300
Finisher
Podostation 700
Sander
SKU: PRIMATEC1300
SKU: PODO700
Features
• Naumkeag motor
• Trimmer aggregate
• 1 x Conical shaft to easely interchange tools
• 1 x Heel Breaster Cone
• 1 x 40 mm (1.6’’) Sanding Belt on the left side
• 1 x 100 mm (4’’) Sanding Belt in the right side
• 2 Speed motor for Sanding Belts
• Separately operated Sanding Belts
• Integrated Dust Collection System
Features
• Mobile finishing ortho Sander
• Workbench with integrated sanding unit
• Vacuum system
• Filter bag integrated.
Specifications
• Dimensions: 28’’ W x 23.6’’ D x 52’’ H
• 230 V, 60 Hz, 1 Ph
Specifications
• Dimensions: 51’’ x 32’’ x 64’’
• 230 Volts, 60 Hz, 1 Phase
Option
Metec 920 Sander
SKU: METEC920
Mas 450 Dust
Extraction system
SKU:MAS450
Build to be connected to the central
extraction system.
Features
• Naumkeag motor
• Air-stream - for dust-free work
• Cone
• 2 Sanding Belts
• Sensor - automatic operation of the dust claps
• Ergo - with extreme freedom for the wide bands
• Panel - central operation unit
• Tangential funnel - targeted suction
Option
44
AFT Line
Dust Extraction systems
Podo 20 Mobile
Sander
Mobile Dust
Extraction System
MAS 150,
SKU: PODO20MOBIL
SKU:MAS150MOBILE
Mobile System with tool
holder
SKU: MAS150MOBILEOH
Mobile System without
tool sholder
Features
• Small portable sanding table
• Include transportable / rolling case
• Easy interchangeable bayonet system
• Integrated fan
• Integrated Dust Collection System
Specifications
• 22'' L x 26'' D x 37''
(without tool holder)
• 22'' L x 26'' D x 64''
(with tool holder)
• 230 Volts, 60 Hz, 1 Ph, 0.55 kW
Specifications
• 25’’ W x 17’’ D x 20’’ H
• 230 Volts, 60 Hz, 1 Phase
Mas series Dust Extraction System
Features MAS450
• 2 Connection Port
• 18’’ L x 32’’ D x 93’’ H
• 230 V, 60 Hz, 1Ph
MAS 450,
SKU: MAS450
45
Features MAS1200
• 47'' L x 30'' D x 91'' H
• 230 V, 60 Hz, 1Ph
• Filter Surface:
77.5 p² (7.2 m²)
MAS 1200,
SKU: MAS1200
Features MAS1550
• 61’’ L x 30’’ D x 94’’ H
• 230 V, 60 Hz, 1Ph, 7.5 kW
• Filter Surface: 124 p² (11.5 m²)
• Dust collection volume of 280 l
MAS 1550,
SKU: MAS1500
Features MAS1550
• 90’’ L x 30’’ D x 94’’ H
• 230 V, 60 Hz, 1Ph, 7.5 kW
• Filter Surface: 248 p² (23 m²)
• 2 x Dust collection volume
of 280 l
MAS 2300,
SKU: MAS2300
Sole Press & Carver
AFT Line
Titan 1 Orthopedic Press
SKU: TITAN1
Odin II Pneumatic Sole
Press, with V-arm and a
separated heel press
SKU : ODINII
Features
• Adjustable presser lever
• Pressure gauge
• Adjustable height hold down arms
• Cushioned pad for even pressure
Odin I, Pneumatic Sole
press with V-arm and
without an heel press
SKU : ODINI
Specifications
• 10” W x 31’’ D x 22’’ H
• Net weight: 121 Lbs
Features
• Extra long V-arm,
• 1 x separate heel pres
• Permanently inflated cushion
• 11 x pairs of lasts
• Integrated lasts support.
• 26’’ Workbench
Long Sole Cushion
SKU: 6003280040
Specifications
• Odin I : 20” x 49’’ x 24’’
• Odin II : 25” x 75’’ x 26’’
• 230V, 50Hz., 1 HP
Semi-High Cushion
SKU: 6003280050
MTF 200 Carver
SKU: MTF200HV
Features
• Design for orthopedic work
• Electrical in height adjustable lift
• Modern LED-lamps
• Swinging motor and a step less
speed regulator.
Specifications
• 24’’ L x 51’’ H x 49’’ D
• Variable speed 750 to 3000 RPM
• 230Volts, 1 Phase, 2.2 Kw
46
Witzel Vacupress Line
Ovens
Infrared Oven 802
Infrared Oven 1002
Features
Features
Specifications
Specifications
SKU: IR802
SKU: IR1002
• 25W illumination
• Door opens to the left side
• Infinitely adjustable from
30°C to 250°C
• 1 tray with Teflon coating, standard
• Infrared Quartz tubes 8 x 4500W
• Standby switch.
• 12 infrared Quartz tubes
with reflector
• 2 x 25 watts
• Opto-electronic infrared measuring unit
• PID-Controller, infinetely variable from 30° C to 250°C
• 4 locking casters
• Heating area: W 36’’ x D 38’’, Lift range: 34’’ - 43’’
Outside dimensions
• 35.5” W x 35” D x 27.5”H
Inside dimensions
• 24.8” W x 18.1” D x 18.9” H
• Weight: 319 lbs
• Crated Weight: 435 lbs
• 230 Volts, 50/60Hz, 1Ph
• Dimensions: 28’’ W x 23.6’’ D x 52’’ H
• 230 V, 60 Hz, 1 Ph
Outside dimensions
• 52’’ W x 38.2’’ D x 55.9’’ H
• Height with door open: 73’’
Inside dimensions:
• 39.4’’W x 31.5’’ D x 19.7’’ H
• Net weight: 495 lbs
Option
• Stand
Infrared Oven 1302
SKU: IR1302
Features
• 18 Infrared Quartz tubes with reflector, Dual zone
switching (6 or 18 tubes)
• 2 x 25 watts
• Opto-electronic IR-measuring unit
• PID-Controller, infinitely variable from 30°C to 250°C
• Independent, 4 locking casters, locking gas shock lift
adjustment, locks at any height
Specifications
Outside dimensions
• 61.6” W x 46.5” D x 55.1” H
• Height with doors open: 73”
Inside dimensions
• 51.2” W x 42.9” D x 19.7” H
• Weight: 594 lb
• 230 Volts, 50/60Hz, 1Ph
47
Infrared Oven
1302 XTR
Ovens
Bubble Forming Tray
SKU: SETFR
SKU: IR1302XTR
Features
* Same feature than the
IR1302 but with 20’’more depth
* Infrared Oven for the O&P field including
movable Roll-about tray
* 24 Infrared-Quartz-tubes with reflector
* Digital PID-Controller, infinitely adjustable
from 30°C to 250°C
* Dual zone switching (6/24)
Roll of Teflon coating Sq/f
SKU: 13150
Specifications
Outside dimensions
* 63’’ W x 70’’ D x 55’’H
* Height door opened: 73’’
Inside dimension
* 51’’ W x 63’’ D x 20’’H
* 4 locking casters, locking gas shock lift adjustment
* Heating area: 49’’ W x 61’’D
* 240V / 50/60Hz / 3 Phase / (32 Amp. CEE) / total
capacity 11,1kW
* 4 x 25 watts
* Weight: net: 792 lbs
* Crated Weight: 960 lbs
Heat Protection
Gloves
SKU: 20009
Infrared Oven 2102 Dual
SKU: IR2102DUAL
Features
• Ideal for larger molds such as seats for wheel chairs
and much more
• 28 Infrared Quartz tubes with reflector, dual zone
switching (12 or 28 tubes)
• 3 x 25 watts
• 2 x Opto-electronic IR-measuring unit
• 2 x PID-Controller, infinitely variable from 30°C to 250°C
• 4 locking casters, locking gas shock lift
adjustment, locks at any height
Specifications
Inside dimensions
• 86.6” W x 42.9” D x 19.7” H
• Height with doors open: 68.9’’
Outside dimensions
• 98.4” W x 48.8” D x 51.2” H
• Weight: 970 lbs
• 230 Volts, 50/60Hz, 1Ph
48
Ovens &
Vacuum Press
Pre-Preg Convection Oven
PO1200
IR1612 Convection
Oven
SKU: PO1200
SKU: IR1612
Features
* Microprocessor with PID feature,
optimized for Pre-Preg processing
* Timer- and Ramp-feature
for programming individual heating
* 4x vacuum-connector
* 4 casters with stop, double doors with
double-pane viewing window
* Three zone heating cabinet
Specifications
Outisde dimensions
* 48’’ W x 36’’D x 62’’H
Inside dimensions
* 39’’ W x 24’’ D x 47’’H
* 240V / 60Hz / 1 or 3 Phase / (16 Amp. CEE) /
total capacity 10,2 kW
* 3x 3300W, 3x fan motor with reversing rotation diretion
* Temperature infinitely adjustable 30°C to 250°C,
* Illumination: 2 x 25 watts
* Weight net: 129 lbs
* Crated Weight: 190 lbs
Features
• Thermostat: infinitely up to 290°
• Timer: infinitely 0-60 minutes and
permanent on On/Off active light
• Housing: Stainless steel inside and outside
• 1 grill and 1 tray
Specifications
• Inside dimension: 16’’ W x 12’’ D x 10’’ H
• Outside dimension: 21’’ W x 20’’ Dx 12.5’’ H
• Packed weight: 49 lbs
• Net weight: 45 lbs
• 230 Volts, 1 phase, 11 Amps
Vacupress 620 S3
SKU: SUPREME620S3
Features
• Speeds up the cooling of moulded
Thermoplastics up to 75%
• Special air jets ensure a minimum air
consumption at a low pressure of just 1,5bar
• opening and closing of the working frame
with only one handle
• supported by gas-shock
Specifications
• Heating Unit Vacuum-Press
• 29’’ W x 29’’ D x 65’’ (max) H
• Net Weight : 374 lb
• Vacuum compartment 8.3’’ W x 5.5 ‘‘D x 5’’
integrated with lid
• Heating element : 23’’ x 17’’
• 240 V, 60 Hz, 1-ph, 6 KW
• Vacuum pump : 0,45 KW 12m³/h oil free
Option
* Base
49
Ortho & Shoe Repair
Rebuilt Machinery
Landis International is your best source of spare parts,
needles, dust bags, v-belts, polishing brushes, motors,
contact wheels and many more…
We manufacture and carry part for the following
brands: Landis shoe machine, Supreme Shoe Machinery,
Sutton Landis, Autosoler, Stanley Bostitch, Adler, Singer, Pfaff,
Juki, Power Shoe Machine, Besser, Claes, Rapid E, Champion,
Pederson, Hardo, Gotz and Mebus and more.
In addition, we also have a large selection of reconditioned
machines, available directly on our website at
www.landisinternational.ca
Rebuilt Machinery
Sanders & Finishers
Plastic & Leather
Cutters
And much more...
InSoles & OutSoles
Stitchers
Shoe Shine
Valets
Sewing & Paching
Machines
Stretchers
50
Landis International Inc., a Canadian manufacturer and distributor of orthopedic and
shoe repair machinery, is the undisputed leader and the Industry’s main supplier for
North America! Landis International offers new and reconditioned quality equipment,
tools, as well as the necessary parts required for the maintenance of equipment built
to last a lifetime! For more than 50 years, this dynamic leader has specialized in the development and distribution of equipment designed to make their customers' life easier.
For the past few years, it experienced renewed growth as it gained international recognition and increased its market share. With its strong and experienced R&D crew,
supported by designers and technicians, Landis International knows how to adapt to
emerging technical realities. Furthermore, it rapidly meets its clientele,s new requirements and adapts its products to their demands.
Landis International Inc.
800, Rossiter St., Saint-Jean-sur-Richelieu, QC, Canada, J3B 8J1
TF. 800-634-0806 T. 450-359-8800 F. 450-359-9619
W. landisinternational.ca @. [email protected]
V2.2016

Catalogue - Landis International

Transcription

Similar documents

Diamant - Netto - Preise

- TU Bergakademie Freiberg