to view our printed catalog in PDF format, .

Transcription

Beachside Lighting was established in 1994 to fill a need for corrosion-resistant exterior lighting fixtures in Hawaii’s moist, salt
air environment. While our focus on durability has given specifiers the best choice for near-ocean applications, our fixtures
can be used anywhere quality is a priority.
Path Lights
3-9
Bollards and Dock Lights
10 - 13
Directionals
14 - 17
Projection
18 - 19
Marker Fixtures
20
In-Grade Uplights
21 - 23
Step Lights
24 - 25
Specialty
26 - 27
Architectural
28 - 32
Sconces
33
Accessories
34 - 35
Finishes
36
Transformers and Ballasts
37
Torches
38 - 39
Beachside Lighting (800) 405 - 6732 (808) 263 - 5717 www.BeachsideLighting.com
905 Kalanianaole Hwy, #29A, Kailua, Hawaii 96734 USA
2
R-Series Path Lights
Beachside Lighting’s R-Series path lights have set the standard for durability in low-voltage walkway and area lighting. The
completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping. Features include an
18-gauge copper shade, a 5mm thick frosted glass lens, and a riser made of schedule 40 brass pipe. Utilizes LED, halogen,
and xenon light sources. CSA listed. IP Rating: 66
3
R-Series LED Path Lights [12/120/230V LED]
R3
R5A
R3A
Ø 8.8" x 19.8” (22.2 x 50.2cm)
on standard 12” (30cm) riser
R7
Ø 8.0” x 20.3” (20.3 x 51.5cm)
Ø 9” x 19.3” (22.9 x 49cm)
Ø 4.8” x 14.7” (12.1 x 37.2cm)
GU10 • MR16 LED
GS2
GS2BC
GS4
JB
4
Ø 6” x 15.3” (15.2 x 38.8cm)
GU5.3 • MR16 LED
Remote transformer required
HSR
Ø 7” x 8.9” (17.8 x 22.6cm)
R8
Lamps - 120V / 230V
5 Watt Amber (1500K)
5 Watt Warm White (3000K)
Accessories
Ø 7.5” x 18.7” (19.1 x 47.6cm)
Lamps - 12V
5W-A*
5W
9W
R19
R5
5W-A*
5W
8W
Stem Heights
Stems are offered in five stock sizes:
2, 8, 12, 16, and 20 inches
Half Shield for 180° illumi(5, 20, 30, 40, and 51 cm)
nation
Heavy-duty Ground Spike
Custom heights are also available.
with cast Brass Cap
Standard Ground Spike with
cast brass cap (12V only)
Cast brass Junction Box
* Turtle-friendly lamping as approved by the
Florida Fish and Wildlife Conservation Commission.
R-Series Path Lights [12V LED, Halogen, Xenon]
R-003
R-005A
R-003A
Ø 8.8” x 16.3” (22.2 x 41.5cm)
R-007
Ø 7.3” x 16.3” (18.4 x 41.3cm)
Ø 9” x 16.1” (22.9 x 41cm)
Ø 4.8” x 11.3” (12.1 x 28.6cm)
Lamps - 12V
Stem Heights
2, 8, 12, 16, and 20 inches
(5, 20, 30, 40, and 51 cm)
G4
3W-G4
10X
15X
20X
3 Watt LED (2800K)
10 Watt Xenon
15 Watt Xenon
20 Watt Xenon
G4 • G6.35 • GY6.35
10H
20H
35H
50H
10 Watt Halogen
20 Watt Halogen
35 Watt Halogen
50 Watt Halogen
R-005
Ø 7.5” x 15.5” (19.1 x 39.3cm)
R-008
Ø 6” x 11.5” (15.2 x 29.1cm) on
standard 8” (20cm) riser [shown on 16”]
Accessories
HSR
GS2
GS2BC
GS4
JB
Half Shield for 180° illumination
Heavy-duty Ground Spike with
cast Brass Cap
cast brass cap
Unfinished brass/copper is standard. Fixtures will weather to a natural living patina.
Acid finishing, powder coating, and nickel plating can be specified. See Page 36.
R-019
Ø 7” x 5” (17.8 x 12.7cm) on
standard 2” (5cm) riser [shown on 12”]
5
Z1 Path Light [12V LED]
Light Engine - 12V Remote transformer required
Cree XP-E LED module
2W-A
Cree XP-G LED module
3W
4W
Stem Heights
Stems are offered in four stock sizes:
8, 12, 16, and 20 inches (20, 30, 40, and 51 cm)
Accessories
Z1
Ø 5” x 17.1” (12.6 x 43cm) on standard 12” (30cm) riser
GS2
GS2BC
GS3R
GS4
JB
Heavy-duty Ground Spike with cast Brass Cap
Heavy-duty Ground Spike with cast brass cap
for telescoping Riser
Standard Ground Spike with cast brass cap
L-004 Path Light [12V LED, Incandescent]
Lamps - 12V
Remote transformer required.
S8 double-contact bayonet base
1W-S8-DC
13W
18W
26W
1 Watt LED
13 Watt Incandescent
Accessories
GS2
GS2BC
GS4
JB
L-004
6
Ø3.5 x 23” (8.9 x 58cm)
L-Series Path Lights [12V LED, Halogen, Incandescent, Xenon]
L-003
L-005A
L-003A
Ø 9” x 17.4” (22.9 x 44.3cm)
Ø 4.8” x 12.5” (12.1 x 31.8cm)
L-007
2, 8, 12, 16, and 20 inches
(5, 20, 30, 40, and 51 cm)
3 Watt LED (2800K)
10 Watt Xenon
15 Watt Xenon
20 Watt Xenon
G4 • G6.35 • GY6.35
10H
20H
35H
10 Watt Halogen
20 Watt Halogen
35 Watt Halogen
Ø 6” x 13.2” (15.2 x 33.4cm)
3W-G4
10X
15X
20X
L-008
Ø 8” x 17.9” (20.3 x 45.6cm)
Stem Heights
G4
Ø 7.5” x 16.7” (19.1 x 42.4cm)
Lamps - 12V
S8 double-contact bayonet base
1W-S8-DC 1 Watt LED (3000K)
13W
3 Watt Incandescent
18W
26W
L-005
Ø 8.8” x 17.6” (22.2 x 44.7cm)
Accessories
GS2
GS2BC
GS4
JB
with cast Brass Cap
L-019
cast brass cap
Ø 7” x 6.6” (17.8 x 16.8cm)
Unfinished brass/copper is standard. Fixtures will weather to a natural living patina.
Acid finishing, powder coating, and nickel plating can be specified. See Page 36.
7
M-Series Path Lights [12/120V Halogen, Xenon, CFL, Metal Halide]
Beachside’s M-Series path lights are the ultimate in heavy-duty landscape lighting. Made of cast brass, these fixtures are larger
in scale than other Beachside path lights. The lamp is protected by a threaded glass lens. Risers are schedule 40 brass pipe.
M-Series path lights equipped with self-ballasted CFL, halogen, xenon, or metal halide lamps feature a traditional, multi-louver
design. Louvers are angled at 45° to eliminate glare. CSA Listed. IP 66.
Stem Heights
Stems are offered in three sizes:
16, 20, and 24 inches (41, 51, and 61 cm)
Accessories
HSM
RB
GS2BC
JB
Half-Shield for 180° illumination
In-grade, Remote metal-halide Ballast (Metal Halide only)
Lamps - 12V
G4 / G6.35 / GY6.35
20 Watt Xenon
20X
35 Watt Halogen
35H
50H
50 Watt Halogen
75H
75 Watt Halogen
100H
100 Watt Halogen
Lamps - 120V
E26 (medium screw base)
M3
Ø 10.6” x 29.6” (27 x 75.3cm)
M6
Ø 5.5” x 28.9” (14 x 73.4cm)
8
M5
Ø 11.1” x 28.6” (28.2 x 72.7cm)
M7
Ø 12” x 30.2” (30.5 x 76.6cm)
26CFL
50MH
70MH
100MH
26 Watt self-ballasted CFL
50 Watt Metal Halide
M8
Ø 8” x 30” (20.3 x 76.3cm)
M-Series LED Path Lights [12/120/230V LED]
M-Series LED path lights share the same rugged, cast brass bases and shades and brass pipe risers as our other M-series
path lights, but with a single-louver design specifically for LED light sources. CSA Listed. IP 66.
Stem Heights
Stems are offered in three sizes:
16, 20, and 24 inches (41, 51, and 61 cm)
*
Accessories
HSM-LED Half-Shield for 180° illumination
GS2BC
Heavy-duty Ground Spike with
cast Brass Cap
JB
Turtle-friendly lamping as approved by Florida Fish
and Wildlife Conservation Commission.
Unfinished brass is standard. Fixtures will weather to
a natural living patina. Acid finishing, powder coating,
and nickel plating can be specified. See Page 36 .
Lamps - 12V
GU5.3 • MR16 LED
5W-A*
5W
9W
Lamps - 120V / 230V
GU10 • MR16 LED
5W-A*
5W
8W
M3-LED
Ø 10.6” x 30.4” (27 x 77.2cm)
M7-LED
Ø 12” x 30” (30.5 x 76.2cm)
M6-LED
Ø 5.5” x 29.6” (14 x 75.2cm)
M5-LED
Ø 11.1” x 29.7” (28.2 x 75.3cm)
M8-LED
Ø 8” x 30.8” (20.3 x 78.2cm)
9
MB-Series Bollards [12/120V Halogen, Xenon, CFL, Metal Halide]
Beachside’s MB-Series bollards set the standard for durable, corrosion-resistant walkway lighting. These fixtures share
their cast brass shades and louvers with the rugged M-series path lights, secured atop risers crafted from 4” diameter brass
tubing. The lamp is protected by a threaded glass lens. An internal brass collar with stainless steel hardware ensures stability. MB-Series bollards equipped with low-voltage halogen or xenon, self-ballasted CFL, or metal halide lamps feature a
traditional design, with multiple louvers angled at 45° to eliminate glare. CSA Listed. IP 66.
Lamps - 12V
Lamps - 120V / 230V
G4 / G6.35 / GY6.35
20X
20 Watt Xenon
35H
35 Watt Halogen
50H
50 Watt Halogen
75H
75 Watt Halogen
100H
100 Watt Halogen
26CFL
50MH
70MH
100MH
Accessory
Shafts are offered in two sizes:
HSM
50 Watt Metal Halide, ED17 type
Shaft Heights
12 and 28 inches (30 and 71 cm)
Unfinished brass/copper is standard.
Fixtures will weather to a natural living
patina. Acid finishing, powder coating,
and nickel plating can be specified. See
Page 36.
MB3
Ø 10.6” x 35.4” (27 x 89.8cm)
on standard 28” (71cm) shaft
MB6
Ø 5.5” x 34.6” (14 x 87.9cm)
10
MB5
Ø 11.1” x 34.4” (28.2 x 87.3cm)
MB8
Ø 8” x 35.8” (20.3 x 90.9cm)
MB7
Ø 12” x 35.9” (30.5 x 91.2cm)
MB-Series LED Bollards [12/120/230V LED]
MB-Series LED bollards use the same cast brass shades and extruded brass tubing as our other MB bollards, but feature a
single-louver design specifically for LED light sources. CSA Listed. IP 66.
Lamps - 12V
Shaft Heights
Shafts are offered in two sizes:
GU5.3 • MR16 LED
5W-A*
5W
9W
12 and 28 inches (30 and 71 cm)
Accessory
HSM-LED
Lamps - 120V / 230V
GU10 • MR16 LED
5W-A*
5W
8W
MB3
Ø 10.6” x 36.1” (27 x 91.7cm)
MB6
Ø 5.5” x 35.4” (14 x 89.8cm)
* Turtle-friendly lamping as approved by the Florida Fish and
Wildlife Conservation Commission. Fixtures have minimal
to no inherent glare and use amber LED lamping between
585 - 595 nanometers.
MB5
Ø 11.1” x 35.4” (28.3 x 89.9cm)
MB8
Ø 8.0” x 36.5” (20.3 x 92.7cm)
MB7
Ø 12.0” x 35.7” (30.5 x 90.7cm)
11
Contemporary Bollards [12/120/230V LED, Halogen]
MB2
Lamps - 12V Remote transformer required
GU5.3 • MR16 LED
5W-A
5W
9W
Lamps - 120V / 230V
GU10 • MR16 LED
5W-A
5W
8W
Accessory
MB2
Ø 4” x 26” (10.2 x 66cm)
MB2 in Nickel finish
L-021
HS-MB2
Ø 2.4” x 7.8” (6.1 x 19.8cm)
(concrete installation)
L-021-GS
(junction box or ground spike – see Mounting Accessories)
L-022
(concrete installation)
Lamps - 12V
Optical Accessory
HS1
ESX
FMT
EXT
5W-A
5W
9W
12
Ø 2.4” x 27.2” (6.1 x 69.1cm)
Ø 2.4” x 6.8” (6.1 x 17.3cm)
L-021
GU5.3 • MR16
L-022
L-021-GS
20 Watt Halogen
35 Watt Halogen
50 Watt Halogen
5 Watt LED Amber (1500K)
5 Watt LED Wm Wht (3000K)
9 Watt LED Wm Wht (3000K)
Half-shield for 180° illumination
Mounting Accessories
(L-021-GS only)
GS2
GS2BC
GS4
JB
GS2 with Brass Cap
Medium-duty Ground Spike
Dock Lights [12/120/230V LED, CFL]
Beachside's Dock Lights use the same cast brass shades and louver designs as our MB bollards, mounted on 4" (10.2 cm)
high, extruded brass tubing, indicated by the "-4" suffix. The multiple-louver design houses the CFL lamp. The single-louver
version is specific to LED lamping. CSA Listed. IP 66.
Lamps - 12V
GU5.3 • MR16 LED
5W-A*
5W
9W
Lamps - 120V / 230V
GU10 • MR16 LED
5W-A*
5W
8W
* Turtle-friendly lamping as approved
by the Florida Fish and Wildlife Conservation Commission. Fixtures have
minimal to no inherent glare and use
amber LED lamping between 585 595 nanometers.
26CFL
MB3-4
Ø 10.6” (27.0cm)
MB6-4
Ø 5.5” (14.0cm)
Accessories
HSM
Half-Shield for 180°
illumination (CFL)
HSM-LED
Half-Shield for 180°
illumination (LED)
Unfinished brass/copper is standard.
Fixtures will weather to a natural living
patina. Acid finishing, powder coating,
and nickel plating can be specified.
See Page 36.
MB7-4
Ø 12.0” (30.5cm)
MB5-4
Ø 11.1” (28.3cm)
MB8-4
LED version shown Ø8” (20.3cm)
MB6-4 on 8" diameter wood base
Photo courtesy of Doug Ludmann.
13
Directionals [12/120V LED, Halogen, Metal Halide]
Beachside Lighting’s M30 and M38 are rugged, heavy-duty, cast brass directionals
that use LED, Halogen, and Metal Halide Par lamps. The M30 is available in both
12 Volt and 120 Volt configurations; the M38 is 120 Volt only. CSA Listed. IP 66.
M30
Lamps - 12V
GU5.3 • MR16 • Remote transformer required
5W-SP
5W-NFL
5W-FL
5W-WFL
8W-SP
9W-NFL
9W-FL
M30
5W LED
5W LED
5W LED
5W LED
8W LED
9W LED
9W LED
15º spot
25º narrow flood
40º flood
100º wide flood
10º spot
25º narrow flood
36º flood
BAB 20W Halogen 36º flood
FMV 35W Halogen 24º narrow flood
EXT 50W Halogen 12º spot
M30 and M38 LED lamp options are
Warm White (3000K)
Lamps - 120V
Ø 4.8” x 9.8” (12.2 x 25cm)
E26 (medium screw base) • Par 30L
18PAR30SP
18PAR30NFL
18PAR30FL
18PAR30WFL
HAL75PAR30SP
HAL75PAR30NFL
HAL75PAR30FL
MH70PAR30SP
MH70PAR30NFL
18.5 Watt LED
18.5 Watt LED
18.5 Watt LED
18.5 Watt LED
75 Watt Halogen
75 Watt Halogen
75 Watt Halogen
9º spot
25º narrow flood
36º flood
60º wide flood
9º spot
30º narrow flood
50º flood
10º spot
30º narrow flood
M38
Lamps - 120V
E26 (medium screw base) • Par 38
St. Andrew’s Church, Honolulu, illuminated by
M38 with 100 Watt metal halide lamping.
Photo courtesy Lowell Barnhart
18PAR38SP
18PAR38NFL
18PAR38FL
18PAR38WFL
HAL100PAR38SP
HAL100PAR38NFL
MH100PAR38SP
MH100PAR38NFL
18.5 Watt LED
18.5 Watt LED
18.5 Watt LED
18.5 Watt LED
100 Watt Halogen
100 Watt Halogen
9º spot
25º narrow flood
36º flood
60º wide flood
10º spot
25º narrow flood
15º spot
25º narrow flood
Accessories
GS2
GS2BC
JB
TMJB
TMJBX
RB
SB
M38
14
Ø 6.5” x 10.8” (16.5 x 27.4cm)
Cast brass junction box
Brass, Tree-Mounted Junction Box, single fixture mount, stainless
steel strap
Brass, Tree-Mounted Junction Box, single fixture mount, stainless
steel screws
In-grade, remote, metal halide ballast
Above-grade, remote, metal halide ballast
Unfinished brass/copper is standard for all our products. Fixtures will weather to a
natural living patina. Acid finishing, powder coating, and nickel plating can be specified. See Page 36.
Directionals [120/230/277V Metal Halide]
Beachside’s M39 uses a bi-pin, metal halide lamp to deliver a large,
rectangular distribution ideal for large canopy trees. The reflector and
bezel can be rotated 90º for a horizontal or vertical orientation. CSA
listed. IP66. The W16 combines the punch of metal halide with the
small footprint of an MR16 lamp. CSA listed. IP66.
M39
Lamps - 120 / 230 / 277V (specify voltage with ballast below)
G12 base • T4.5 / T6 • Ceramic Metal Halide (3000K)
MH20G12
MH39G12
MH70G12
20 Watt CMH
39 Watt CMH
70 Watt CMH
Optical Accessory
BGSM39
Brass Glare Shield (horizontal orientation only)
M39
W16
Ø 6.3” x 6.0” (16 x 15.2cm) with shield
Lamps - 120 / 230 / 277V (specify voltage with ballast below)
GX10 • MR16 • Ceramic Metal Halide (3000K)
MH20MR16SP
MH39MR16NFL
20 Watt CMH
39 Watt CMH
12° spot
25° narrow flood
Optical Accessories
BGS
BGSF
HL1
FR
PR
RT
Brass Glare Shield, 45º cutoff
Brass Glare Shield, Full cutoff
Honeycomb Louver, ⅛” / 3mm thick
Frosted lens
Prismatic spread lens
Rectilinear spread lens
M39 fixtures illuminating Northern California office façade
Photo courtesy of Violich Properties
GS2
GS2BC
JB
TMJB
TMJBX
Brass, Tree-Mounted Junction Box, single fixture mount,
stainless steel strap
Brass, Tree-Mounted Junction Box, single fixture mount,
stainless steel screws
Metal Halide Ballasts
Remote magnetic—use with mounting accessories above. See page 37.
RB-(wattage)-(voltage)
SB-(wattage)-(voltage)
In-grade, composite, remote ballast box
Above-grade, aluminum, remote ballast box
W16
Ø 2.4” x 4.9” (6.1 x 12.4cm)
Length measured from pivot point.
15
Directionals – E8 Series [12V LED]
The E8 is an unobtrusive, directional fixture ideal for small landscape spaces, trellises, or gazebos. Its LED light engine
features tool-free, field-changeable optics in spot, narrow flood, and flood beams. The E8 can be mounted to a tree, landscape structures, or a ground spike. E8-S and E8-S2 fixtures feature single- or dual-head risers for mounting in ground cover
planting. Standard 12 Volt AC input. CSA Listed. IP 66.
E8
Ø 1.6” x 4.2” (4.2 x 10.8cm)
Length measured from pivot point
E8 shown with BGS8 on TDM1
Light Engines - 12V LED
2W-A
3W
4W
Cree XP-E
Cree XP-G
Cree XP-G
Optics: SP 10º spot, NFL 30º narrow flood, FL 50º flood, NO 120º wide flood
Stem Heights (E8-S, E8-S2)
Stems are offered in four stock sizes: 8, 12, 16, and 20 inches (20, 30, 40,
and 51 cm). Custom heights are also available.
Optical Accessories
E8-S
BGS8
BGS8F
FR8
HL8
PR8
RT8
Frosted lens
E8-S2
16
Tree Mounts:
TDM1, TDM2, TDM2-SS, TDM3, TDM4, TMJB, TMJB2,
TMJBX, TMJB2X (See page 34 & 35)
GS2
GS2BC
GS4
JB
SA
Sure Aim locking rotation accessory
Unfinished brass/copper is standard for all of our products. Fixtures will weather
to a natural living patina. Acid finishing, powder coating, and nickel plating can
be specified. See Page 36.
Directionals – L-011 Series [12/120/230V LED, 12V Halogen]
The L-011 is Beachside's multipurpose directional fixture, available in low-voltage and line-voltage configurations.
It uses either an enclosed-fixture-rated MR16 LED or MR16 halogen lamp, 50 Watts maximum. The L-011 can
be mounted in the ground or to a tree, and is also available on a single- or dual-head riser. CSA Listed. IP 66.
L-011 shown on TDM1
L-011-S
Ø 2.4” x 4.9” (6.0 x 12.4cm) Length measured from pivot point
Lamps
12 Volt
120V / 230V
GU5.3 • MR16
BAB
FMV
EXT
5W-SP
5W-NFL
5W-FL
5W-WFL
8W-SP
9W-NFL
9W-FL
20W Hal.
35W Hal.
50W Hal.
5W LED
5W LED
5W LED
5W LED
8W LED
9W LED
9W LED
36º flood
24º narrow fld
12º spot
15º spot
25º narrow fld
40º flood
100º wide fld
10º spot
25º narrow fld
36º flood
L-011
Shown with BGS, HL1,SA, and
GS2BC accessories
L-011-120/-230V
GU10 • MR16
5W-NFL
5W-FL
5W-WFL
8W-SP
8W-NFL
8W-FL
5W LED
5W LED
5W LED
8W LED
8W LED
8W LED
25º narrow fld
40º flood
100º wide fld
10º spot
25º narrow fld
36º flood
L-011 LEDs are Warm White (3000K).
Other color temperatures are available.
12 Volt lamps require a remote transformer.
Stem Heights (L-011-S, L-011-S2)
Stems are offered in four stock sizes: 8, 12, 16, and 20 inches (20, 30, 40,
and 51 cm). Custom heights are also available.
L-011-S Shown on 8” riser with BGS and
L-011-S-120/-230V GS2BC accessories
Optical Accessories
BGS
BGSF
HL1
HL2
Honeycomb Louver, ¼” / 6mm thick
FR
PR
RT
SL
Frosted lens
Solite lens
Tree Mounts:
GS2
GS2BC
GS4
JB
SA
TDM1, TDM2, TDM2-SS, TDM3, TDM4, TMJB, TMJB2,
TMJBX, TMJB2X (See page 34 & 35)
*Standard Ground Spike with cast brass cap
* For 12 Volt fixtures only
L-011-S2
Shown on 12” riser with
L-011-S2-120/-230V GS2BC accessory
17
Projection – Landscape [12/120/230V LED, Halogen, Metal Halide]
L-011-P and L-011-P-H (Hanging)
12V, Remote transformer required • GU5.3 • MR16
FMV
EXZ
35 Watt Halogen
50 Watt Halogen
24º narrow flood
24º narrow flood
9W-NFL
9 Watt LED
25º narrow flood
L-011-P-120V or -230V
120V or 230V • GU10 • MR16
8W-SP
8 Watt LED
10º spot
L-011-P-MH-120V or -230V
L-011-P with TDM1
L-011-P-120V/-MH
Ø 2.5" x 5.5" (6.3 x 14.0 cm)
Ø 2.5" x 7.5" (6.3 x 19.1 cm)
120V or 230V • GX10 • MR16
Ceramic Metal Halide (3000K) • Remote ballast required
MH20MR16SP
MH39MR16SP
20 Watt CMH
39 Watt CMH
12º spot
12º spot
Tree
Mounts:
GS2
GS2BC
GS4
JB
SA
TMJB, TMJB2, TMJBX, TMJB2X, TDM1*,
TDM2*, TDM2-SS*, TDM3*, TDM4*
(See page 34 & 35)
*Standard Ground Spike with cast brass cap
*12 Volt fixtures only
Unfinished brass/copper is standard for
all of our products. Fixtures will weather
to a natural living patina. Acid finishing,
powder coating, and nickel plating can
be specified. See Page 36.
L-011-P with TDM3 canopy
18
L-011-P-H hung from stainless steel cable
Projection – Canopy [12/120/230V LED, Halogen, Metal Halide]
L-011-P-CM1
L-011-P-CM2
(Canopy Mount, single head)
L-011-P-CM2
(Canopy Mount, dual head)
12V, Remote transformer required • GU5.3 • MR16
FMV
EXZ
35 Watt Halogen
50 Watt Halogen
24º narrow flood
24º narrow flood
9W-NFL
9 Watt LED
25º narrow flood
L-011-P-CM1-120V or -230V
L-011-P-CM2-120V or -230V
120V or 230V • GU10 • MR16
8W-SP
8 Watt LED
10º spot
L-011-P-CM1
L-011-P-CM1-120V/-MH
Ø 2.5" x 5.5" (6.3 x 14.0 cm)
Ø 2.5" x 7.5" (6.3 x 19.1 cm)
L-011-P-CM1-MH-120V or -230V
L-011-P-CM2-MH-120V or -230V
120V or 230V • GX10 • Remote ballast required
MR16 • 20W max. each for L-011-P-CM2-MH
MH20MR16SP
MH39MR16SP
20 Watt CMH
39 Watt CMH
12º spot
12º spot
Canopy Mounting Accessories
SA
Projection Gobos are offered in the three stock
patterns shown below. Custom designs are also available.
Gobo Diameter is 51.5mm with a 34mm recommended Image Diameter.
AMPH Amorphous
EP Egyptian Palms
WP Wild Palms
19
Marker Fixtures [12/120/230V LED, Halogen, Metal Halide]
Beachside Lighting offers marker fixtures in two sizes: The low-voltage, 3-½”-diameter E17 features a compact design and
illumination configurations determined by the number and orientation of the slots machined out of the face. Lamp options are
halogen and LED. The larger L-017 can be had in low- or line-voltage configurations and uses MR16 halogen, LED, or metal
halide sources. This cast brass fixture can shield as many as three of its four light sectors. CSA Listed. IP 67.
E17
Four -Sector Illumination (standard)
E17-1
Single-Sector
E17-2
Two-Sector, Adjacent
E17-OP
Two-Sector, Opposite
Lamps - 12V
GU5.3 • MR16
E17
Ø 3.5” x 0.9” (8.9 x 2.3cm)
5W-A-NFL*
5W-NFL
BBF
5 Watt LED Warm White (3000K)
20 Watt Halogen
L-017
12 Volts
Halogen / LED, remote transformer
L-017-B
120V / 230V
Halogen / LED, integral transformer
GU5.3 • MR16
L-017 (shown with CR)
Ø 6.5” x 1.9” (16.5 x 4.9cm)
Concrete Ring lowers height to 1.7”/4.2cm.
BBF
FMV
EXZ
20 Watt Halogen
35 Watt Halogen
50 Watt Halogen
5W-A-NFL*
5W-NFL
9W-NFL
L-017-A
120V / 230V
Metal Halide with integral ballast
GX10 • MR16
MH20MR16SP
MH39MR16SP
L-017-C
20 Watt Ceramic Metal Halide
120V / 230V
LED for direct line voltage
GU10 • MR16
5W-A-NFL*
5W-NFL
8W-NFL
Accessories for L-017 models
CR
HS17-1
HS17-2
HS17-OP
Concrete Ring for recessed installation
Shield for single-sector illumination
Shield for two-sector, adjacent
Shield for two-sector, opposite
* Turtle-friendly lamping as approved by the Florida Fish
20
In-Grade Uplights [12V LED, Halogen]
Beachside Lighting offers two styles of 12 Volt in-grade uplights with diameters no more than 4.4” / 11.1 cm. The E10 features 360º lamp rotation, with angling up to 15º (partial cutoff up to 30º). The L-009 is a rugged, unidirectional fixture with
a cast brass faceplate. Each all-brass fixture can be used with halogen or LED sources, and mounted in earth or concrete
(with drainage). A remote transformer is required. CSA Listed. IP 66.
L-009 illuminating palm trees, East Honolulu
Lamps - 12V
E10
Ø 4” x 8” (10.1 x 20.3cm) Depth Below Grade
L-009
GU5.3 • MR16
ESX
FMV
EXN*
20 Watt Halogen
35 Watt Halogen
50 Watt Halogen*
12º spot
24º narrow flood
36º flood
5W-SP
5W-NFL
5W-FL
5W-WFL
5 Watt LED
5 Watt LED
5 Watt LED
5 Watt LED
15º spot
25º narrow flood
40º flood
100º wide flood
8W-SP
9W-NFL
9W-FL
8 Watt LED
9 Watt LED
9 Watt LED
10º spot
25º narrow flood
36º flood
* L-009 only. E10 rated 35 Watts maximum.
Optical Accessories
BGS9
HL1
HL2
FR
PR
RT
Brass Glare Shield (L-009 only)
Honeycomb Louver, ⅛” / 3mm thick (Comes
standard on L-009)
Frosted lens
Ø 4.4” x 1” Height Above Grade x 7.5”
Depth Below Grade (11.1 x 2.5 x 19cm)
Unfinished brass/copper is standard. Fixtures will weather to a natural living patina. Acid finishing, powder coating, and
nickel plating can be specified. See Page 36.
21
In-Grade Uplights [12/120/230V Halogen, LED, Metal Halide]
The L-010 is Beachside’s most versatile in-grade uplight. It can be configured for 12V, 120V, or 230V, and uses MR16
LED, halogen, or metal halide sources. A solid brass cover plate is attached to a heat-resistant composite housing.
Lamp-attached optical accessories are available, as well as an external glare shield and brass protection grate. The
optional concrete ring allows installation in concrete. CSA Listed. IP 67.
L-010
L-010-B
12 Volts
Halogen / LED, remote transformer
120V / 230V
Halogen / LED, integral transformer
GU5.3 • MR16
ESX
FMV
EXN
20 Watt Halogen
35 Watt Halogen
50 Watt Halogen
12º spot
24º narrow flood
36º flood
5W-SP
5W-NFL
5W-FL
5W-WFL
5 Watt LED
5 Watt LED
5 Watt LED
5 Watt LED
15º spot
25º narrow flood
40º flood
100º wide flood
8W-SP
9W-NFL
9W-FL
8 Watt LED
9 Watt LED
9 Watt LED
10º spot
25º narrow flood
36º flood
L-010-A
120V / 230V
Ceramic Metal Halide, integral ballast
GX10 • MR16 • 39 Watts maximum
MH20MR16SP
MH39MR16NFL
Standard without accessories
Ø 6.5" x 8.3"
(16.5 x 19.7cm)
L-010-C
20 Watt CMH
39 Watt CMH
120V / 230V
12º spot
25º narrow flood
LED for direct line voltage
GU10 • MR16
5W-NFL
5W-FL
5W-WFL
5 Watt LED
5 Watt LED
5 Watt LED
25º narrow flood
40º flood
100º wide flood
8W-SP
8W-NFL
8W-FL
8 Watt LED
8 Watt LED
8 Watt LED
10º spot
25º narrow flood
36º flood
Accessories
CR
BGS2
PG
FR-MR16
HL-MR16
PR-MR16
RT-MR16
Shown with PG accessory
22
Concrete Ring for recessed installation
Brass Glare Shield
Protection Grate
Frosted lens
Shown with CR, PG, and BGS2 accessories
In-Grade Uplights [12V Halogen, LED]
The small footprints of the E9-R-CR and E9-SQ-CR make them ideal for architectural uplighting mounted within solid
surfaces. These fixtures use Halogen and LED sources at 12 Volts and require a remote transformer. Fixtures feature a
concrete pour collar, allowing flush installation at grade. CSA Listed. IP 66.
E9-R-CR
(Round with concrete ring)
E9-SQ-CR
(Square with concrete ring)
Lamps - 12V
ESX
BBF
BAB
BAB/60
20 Watt Halogen
20 Watt Halogen
20 Watt Halogen
20 Watt Halogen
12º spot
24º narrow flood
36º flood
60º flood
5W-SP
5W-NFL
5W-FL
5W-WFL
5 Watt LED
5 Watt LED
5 Watt LED
5 Watt LED
15º spot
25º narrow flood
40º flood
100º wide flood
8W-SP
9W-NFL
9W-FL
8 Watt LED
9 Watt LED
9 Watt LED
10º spot
25º narrow flood
36º flood
5W-A-NFL
5 Watt LED Amber
(1500K)
25º narrow flood
LED lamps are Warm White (3000K) unless otherwise noted.
E9-R-CR
Ø 3.8” x 5.4” depth (9.6 x 13.7cm)
Optical Accessories
FR
HL1
HL2
PR
RT
Frosted lens
E9-SQ-CR
Ø 4.3” x 4.3” x 5.4” depth
(10.9 x 10.9 x 13.7cm)
Unfinished brass/copper is standard for all our products. Fixtures
will weather to a natural living patina. Acid finishing, powder
coating, and nickel plating can be specified. See Page 36.
23
Step Lights [12V LED, Halogen]
Our E9 Series step lights provide a low profile and small footprint, with an emphasis on glare-free illumination. Louvers
angles at 30º from horizontal cast light below and outward from the fixture. The spacing of the small louvers prevents glare,
even when the fixture is mounted at eye level. The E9 features 12 Volt Halogen and LED sources, where different beam
spreads combine with standard frosted glass on louvered models to create different effects without striations. Standard clear
glass is used for non-louvered models, with the ability to use optical accessories. Two mounting options allow the faceplate
to either sit proud of the surface or fully recessed within a concrete trim ring. CSA Listed. IP 66.
E9-R
E9-RL
Round, Open (clear glass)
E9-RC
E9-RCL
E9-SQ
E9-SQL
Rectangular, Open (clear glass)
Round, Louvered
Rectangular, Louvered
Square, Open (clear glass)
Square, Louvered
Add suffix “-CR” to all the above fixtures for a Concrete Ring
for fully recessed trim. See page 23.
Lamps GU5.3 • MR16 • Remote transformer required
E9-RL
Ø 3.5” x 5.0" Depth (8.9 x 12.8cm)
ESX
BBF
BAB
BAB/60
5W-A-NFL*
5W-SP
5W-NFL
5W-FL
5W-WFL
8W-SP
9W-NFL
9W-FL
20 Watt Halogen
20 Watt Halogen
20 Watt Halogen
20 Watt Halogen
5 Watt LED Amber
(1500K)
5 Watt LED WW (3000K)
12º spot
24º narrow flood
36º flood
60º flood
25º narrow flood
15º spot
25º narrow flood
40º flood
100º wide flood
10º spot
25º narrow flood
36º flood
Optical Accessories
E9-RCL
E9-SQL
24
3” x 4” x 5" Depth (7.6 x 10.2 x 12.8cm)
4” x 4” x 5" Depth (10.2 x 10.2 x 12.8cm)
FR
Frosted lens (non-louvered models only)
HL1 Honeycomb Louver, ⅛” / 3mm thick
HL2 Honeycomb Louver, ¼” / 6mm thick
PR
RT
Turtle-friendly
lamping as approved by the
*
Florida Fish and Wildlife Conservation Commission. Valid for louvered fixtures only.
E9-RC-CR
3.3” x 4.3” x 5.4" Depth
(8.3 x 10.9 x 13.7cm) with Concrete Ring
Step Lights [12V LED, Halogen, Xenon]
The L-012 and L-012F share the same cast brass faceplate and both use 12 Volts, but they operate completely differently.
The L-012 is a recessed fixture with flat glass that uses an MR16 LED or halogen lamp and emphasizes outward light throw.
The L-012F is a surface-mounted fixture with domed, frosted glass within the brass “hood” to accommodate a small bi-pin
led, halogen or xenon lamp, with emphasis on downward illumination. CSA Listed. IP 66.
L-012
Lens Options
CL
FR
RT
Clear glass
Frosted glass
GU5.3 • MR16
Halogen: 20 Watt, 36 & 60º beam spreads
35 Watt, 36 & 60º beam spreads
50 Watt, 36 & 60º beam spreads
LED:
5 Watt, 12, 25, 40, & 100º beam spreads
9 Watt, 10, 25, and 36º beam spreads
5
* Watt Amber (1500K); 25º narrow flood
L-012F-C
Combustible Installation – wood/vinyl
Ø 4.4” x 2.1” Extension x 4.5” Recessed depth
L-012
(11.1 x 5.2 x 11.4cm)
L-012F-NC Non-combustible Install – masonry
G4
10H
20H
35H
10X
15X
20X
1W-G4
3W-G4
10 Watt Halogen
20 Watt Halogen (Non-Combustible only)
35 Watt Halogen (Non-Combustible only)
10 Watt Xenon
15 Watt Xenon
20 Watt Xenon (Non-Combustible only)
Unfinished brass/copper is standard for all our products. Fixtures
will weather to a natural living patina. Acid finishing, powder
L-012F-NC at a Key Largo, FL residence
L-012F
Ø 4.4” x 2.1” Extension
(11.1 x 5.2cm)
L-012F-NC at a St. Thomas, USVI residence
25
Specialty Hanging [12V LED, Incandescent, Halogen]
A Remote Transformer is required for all fixtures listed below:
L-004A
Can be hung by loop or directly from lead wires
Lamps - 12V S8 double-contact bayonet base
1W-S8-DC
13W
18W
26W
1 Watt LED (3000K)
The following fixtures are supplied with a 20" (51cm) long stainless
steel cable and male fitting for tree-mounting accessories, or can be
hung directly from the fixture's own brass loop:
L-004A
Ø 3.5” x 3.3” (8.9 x 8.3cm)
Loop adds 1" to height
L-011-H
Lamps - 12V GU5.3 • MR16
BAB
FMV
EXT
5W-SP
5W-NFL
5W-FL
5W-WFL
8W-SP
9W-NFL
9W-FL
E8-H
L-011-H
20 Watt Halogen
35 Watt Halogen
50 Watt Halogen
36º flood
24º narrow flood
12º spot
15º spot
25º narrow flood
40º flood
100º wide flood
10º spot
25º narrow flood
36º flood
Optical Accessories
Ø 1.6” x 3.3” (4.2 x 8.3cm)
Ø 2.4" x 4.3" (6.0 x 11.0cm)
BGSF
FR
HL1
Frosted lens
Honeycomb Louver, ⅛” thick
PR
RT
SL
Solite lens
E8-H
2W-A
3W
4W
Cree XP-E
Cree XP-G
Cree XP-G
Optical Accessories
E8-H-2x9
Ø 2.0” x 9.3” (5.0 x 23.6cm)
Loop adds 1" to height
BGS8F
FR8
HL8
PR8
RT8
Frosted lens
E8-H-2x9
Lamps - 12V S8 double-contact Bayonet
1W-S8-DC
13W
18W
26W
Mounting Accessories for E8-H, L-011-H, and E8-H-2x9
Tree Mounts:
26
TDM1, TDM2, TDM2-SS, TDM3, TDM4, TMJB, &
TMJBX (See page 34 & 35)
Specialty / Underwater [12V LED, Halogen, Xenon]
R-021 Decorative Lantern Illuminator
Stem Heights
Stems are offered in three sizes: None (standard), 4, and 8
inches (0, 10, and 20 cm)
Lamps - 12V
G4 • Remote transformer required
3W-G4
10X
15X
20X
10H
20H
35H
L-020-B
10 Watt Xenon
15 Watt Xenon
20 Watt Xenon
10 Watt Halogen
20 Watt Halogen
35 Watt Halogen
Brass Underwater Fixture by Focus Industries
Lamps - 12V
R-021
Ø 4.1" base x 3.8" height (10.4 x 9.7cm)
Height is without stem.
ESX
BBF
FMT
FMV
EXT
EXZ
5W-SP
5W-NFL
8W-SP
9W-NFL
20 Watt Halogen
20 Watt Halogen
35 Watt Halogen
35 Watt Halogen
50 Watt Halogen
50 Watt Halogen
5 Watt LED
5 Watt LED
8 Watt LED
9 Watt LED
12º spot
24º narrow flood
12º spot
24º narrow flood
12º spot
24º narrow flood
15º spot
25º narrow flood
10º spot
25º narrow flood
L-020-B LEDs are Warm White (3000K).
Other color temperatures are available.
Unfinished brass/copper is standard for all of our products.
Fixtures will weather to a natural living patina. Acid finishing, powder coating, and nickel plating can be specified. See
Page 36.
L-020-B underwater
R-021 illuminating a Balinese lantern
L-020-B
4.0” x 4.5” base x 4.8" height x Ø 3.4"
(10.2 x 11.4 x 12.1 x 8.6cm)
27
Architectural – Recessed [LED, Halogen]
The L-016 and L-016-F recessed fixtures combine the flexibility of a standard MR16 lamp with the corrosionresistance expected from a Beachside fixture. The gaskets on the brass trims securely seal up against the bottom of the
recessed, 4" stainless steel can, consistent with the fixture's wet location listing. An internal brass bracket allows angling
of the lamp, while a brass ring allows full rotation. Integral 120V - 12V transformer. Also available as a remodel version.
CSA Listed. IP 66.
L-016
New Constr., Extended trim, 30º angling
L-016-F
L-016R
New Construction, Flat trim, 15º angling
L-016R-F
Remodel, Flat trim, 15º angling
Remodel, Extended trim, 30º angling
Lenses Tempered soda lime glass
CL
FR
Clear
Frosted
Lamps GU5.3 • MR16
L-016
Ø 5.0" x 0.8" Trim Height x 5.5" Can Depth
(12.7 x 2.1 x 14.0cm)
BAB
FMW
EXN
20 Watt Halogen
35 Watt Halogen
** 50 Watt Halogen
36º narrow flood
36º narrow flood
36º narrow flood
5W-FL
9W-FL
5 Watt LED
9 Watt LED
40º flood
36º flood
5W-A-NFL*
5 Watt LED Amber
(1500K)
25º narrow flood
** New Construction only
Accessories
HL-MR16
PR-MR16
Lamp-attached Honeycomb louver, ⅛" thick
Lamp-attached Prismatic
spread lens
* Turtle-friendly lamping as approved by the Florida Fish
L-016-F
Ø 5.0" x 0.125" Trim Height x 5.5" Can Depth
(12.7 x 0.3 x 14.0cm)
28
Architectural – Surface Downlight [12/120/230V LED, Halogen, MH]
E2
2W-A*
3W
4W
Cree XP-E
Cree XP-G
Cree XP-G
Optics: SP 10º spot, NFL 30º narrow flood, FL 50º flood, NO 120º
wide flood
Optical Accessories
BGS8
BGS8F
FR8
HL8
PR8
RT8
Frosted lens
L-011-CM
Lamps - 12V GU5.3 • MR16 • 35 Watts max.
BAB
FMW
5W-NFL
5W-FL
5W-WFL
20 Watt Halogen
35 Watt Halogen
5 Watt LED
5 Watt LED
5 Watt LED
36º flood
36º flood
25º narrow flood
40º flood
100º wide flood
9W-FL
5W-A-NFL*
9 Watt LED
5 Watt LED Amber
(1500K)
36º flood
25º narrow flood
E2
Ø 1.6" x 3.3" housing, Ø 2.8" x 0.7" canopy
(4.2 x 8.3cm), (7.0 x 1.9cm)
L-011-CM-120V or -230V
Lamps GU10 • MR16
5W-NFL
5W-FL
5W-WFL
8W-NFL
8W-FL
5 Watt LED
5 Watt LED
5 Watt LED
8 Watt LED
8 Watt LED
25º narrow flood
40º flood
100º wide flood
25º narrow flood
36º flood
5W-A-NFL*
5 Watt LED Amber
(1500K)
25º narrow flood
W16-CM 120V / 230V
Lamps GX10 • MR16 • 39 Watts max. • 3000K
Ceramic Metal Halide • Remote ballast required
MH20MR16SP
MH39MR16NFL
20 Watt CMH
39 Watt CMH
12º spot
25º narrow flood
L-011-CM
Ø 2.4" X 4.3" housing,
L-011-CM-120V / -230V
Ø 5.0" canopy
W16-CM (6.0 x 11.0 x 13.0cm)
Optical Accessories for L-011-CM models and W16-CM
BGS
BGSF
HL1
HL2
FR
PR
RT
SL
Frosted lens
Solite lens
Unfinished brass/copper is standard for all
of our products. Fixtures will weather to a
natural living patina. Acid finishing, powder
29
Architectural – Directional Wall [12/120/230V LED, Halogen, MH]
L-011-KP 12 Volt Directional with Extended Snoot
Tree Mounts:
CMDC1
CMDC2
CMF1
SA
WP
TDM1, TDM2, TDM2-SS, TDM3, TDM4, TMJB,
TMJB2, TMJBX, TMJB2X (See page 34 & 35)
Ø 5" solid brass canopy, single-hole
Ø 5" solid brass canopy, double-hole
Ø 3-¼" x ⅜ " brass canopy (recommended with SA)
⅛" dia. weep hole on snoot (for upward mounting)
L-011-CM1 12 Volt Canopy Mount, single head
L-011-CM2 12 Volt Canopy Mount, dual head
L-011-CM1-120V or -230V
Canopy Mount, single head
L-011-KP
Ø 2.4” x 5.9” (6.0 x 15.0cm)
Shown with TDM3 and SA accessories.
Other mounting accessories available.
L-011-CM2-120V or -230V
Lamps
Canopy Mount, dual head
L-011-KP / -CM1 / -CM2
L-011-CM1/CM2-120V/230V
12V • GU5.3 • MR16
GU10 • MR16
BAB
FMV
EXT
5W-SP
5W-NFL
5W-FL
5W-WFL
8W-SP
9W-NFL
9W-FL
20W Hal.
35W Hal.
50W Hal.
5W LED
5W LED
5W LED
5W LED
8W LED
9W LED
9W LED
W16-CM1
W16-CM2
36º
24º
12º
15º
25º
40º
100º
10º
25º
36º
5W-NFL
5W-FL
5W-WFL
8W-SP
8W-NFL
8W-FL
5W LED
5W LED
5W LED
8W LED
8W LED
8W LED
25º
40º
100º
10º
25º
36º
LEDs are Warm White (3000K).
Other color temperatures available.
12 Volt lamps require a remote transformer.
Canopy Mount, single head
Canopy Mount, dual head
L-011-CM1 Ø 2.4” x 4.9” housing x Ø 5.0" canopy Lamps 120V / 230V • GX10 • MR16 • 39 Watt max • 3000K
L-011-CM1-120V/-230V (6.0 x 12.4 x 12.7cm) Remote ballast required • 20W max. each for W16-CM2
W16-CM1
MH20MR16SP
20 Watt Ceramic Metal Halide 12º spot
MH39MR16NFL
25º narrow flood
Mounting Accessories for L-011-CM and W16-CM models
SA
MS
Motion Sensor (120V L-011-CM2 only)
Optical Accessories for all Directional Wall models
Same options as for
L-013-S / L-014-S on
facing page plus:
**BGS - Brass Glare
Shield, 45º cutoff
**BGSF - Brass Glare
Shield, Full cutoff
L-011-CM2
L-011-CM2-120V/-230V
W16-CM2
30
**Glare Shields not available
for L-011-KP due to its standard extended snoot.
L-011-CM2 with BGS accessories
Architectural – Fixed Wall [12/120/230V LED, Halogen]
E1
12 Volt Step light / Downlight
Light Engines - 12V Remote transformer required
2W-A*
3W
4W
Cree XP-E
Cree XP-G
Cree XP-G
Optical Accessories
FR8 Frosted lens
HL8 Honeycomb louver, ⅛” (3mm) thick
PR8 Prismatic spread lens
RT8 Rectilinear spread lens
E1
L-013-S
12 Volt Uplight / Downlight
12 Volt Downlight
L-014-S
Lamps – Same as 12 Volt options on facing page.
L-013-S-120V or -230V
Ø 1.6” x 3.9” Height x 1.9" Depth
(4.2 x 10.0 x 4.8cm)
E1
Uplight / Downlight
Downlight
L-014-S-120V or -230V
Lamps – Same as 120V / 230V GU10 LED options on facing page.
Ø 2.4" x 9.0" Height x 3.7" Depth
L-013-S
L-013-S-120V/-230V (6.1 x 22.9 x 9.4 cm)
Also available for low and line voltage:
5W-A-NFL*
25º narrow flood
Optical Accessories for all L-013-S and L-014-S models
FR
Frosted lens
HL1
Honeycomb louver, ⅛” (3mm) thick
HL2
Honeycomb louver, ¼” (6mm) thick
PR
RT
SL
Solite lens
Turtle-friendly
lamping as approved by the Florida
*
Fish and Wildlife Conservation Commission.
L-014-S
Ø 2.4" x 6.1" Height x 3.7" Depth
L-014-S-120V/-230V (6.1 x 15.5 x 9.4 cm)
L-014-S
Unfinished brass/copper is standard for all of our
products. Fixtures will weather to a natural living
patina. Acid finishing, powder coating, and nickel
plating can be specified. See Page 36.
31
Architectural [12/120V LED, Halogen, Xenon, CFL]
L-013-R3-S
Top lamps
12 Volt Shaded Uplight / Downlight
Bottom lamps
GU5.3 • MR16
G4
3W-G4
10X
15X
20X
10H
20H
35H
3W LED (2800K)
10W Xenon
15W Xenon
20W Xenon
10W Halogen
20W Halogen
35W Halogen
Remote transformer required.
BBF
BAB
FMV
FMW
EXN
5W-NFL
5W-FL
5W-WFL
9W-NFL
9W-FL
20W Halogen
20W Halogen
35W Halogen
35W Halogen
50W Halogen
5W LED
5W LED
5W LED
9W LED
9W LED
24°
36º
24º
36º
36º
25º
40º
100º
25º
36º
MR16 LEDs are Warm White (3000K). Other color temperatures available.
L-013-R3-S
Ø 9" x 9.9" high x 9.6" ext.
(22.9 x 25.1 x 24.4cm)
L-023
12 Volt Sconce Illuminator
Lamps (x2) 35 Watts maximum
G4 • Remote transformer required
3W-G4
10X
15X
20X
3 Watt LED (2800K)
10 Watt Xenon
15 Watt Xenon
20 Watt Xenon
10H
20H
35H
10 Watt Halogen
20 Watt Halogen
35 Watt Halogen
L-024
120V Fluorescent Sconce Illuminator
Lamp - 120V (x2) 2700K
GU24 • Compact Fluorescent
9CFL
Unfinished brass/copper is standard for all of our products.
Fixtures will weather to a natural living patina. Acid finishing,
powder coating, and nickel plating can be specified. See Page 36.
L-023
Ø 2.4" x 6.5" high x 3.7" ext.
(6.1 x 16.5 x 9.4cm)
L-024
Ø 2.4" x 10.3" high x 3.7" ext.
(6.1 x 26.3 x 9.4cm)
32
9 Watt CFL
L-023 and S-BAMBOO
Copper Sconces for L-023 / L-024
BOP-12x6
S-BAN-BOP
12" x 6" x 4" ext.
12" x 6" x 3.9" ext.
WAA-12x6
(30.5 x 15.2 x 10.2cm ext.)
S-BAMBOO (30.5 x 15.2 x 9.9cm ext.)
WAA-24x8 Custom 24" x 8" x 4" ext.
L-023 fixture behind S-BAMBOO
33
GS2
Heavy-Duty Ground Spike
Ø 3.3" x 19” (8.4 x 48cm)
GS4
Ground Spike with Brass Cap
Ø 2.9” x 9.1” (7.4 x 23cm)
JB installed
TDM2
34
Tree Mount with Nylon Strap
Ø 3” x 2.7” (flat sides) x 1.5" ext.
(7.6 x 6.8 x 3.8cm)
GS2BC
GS2 with Heavy Brass Cap GS3R
Ø 3.3” x 19” (8.4 x 48cm) GS4 installed
SA
Sure Aim Locking Rotation Mount
Eliminates Need for Locknut
TDM2-SS
Tree Mount with
Stainless Steel Strap
Ø 3” x 2.7” (flat sides) x 1.5" ext. (7.6 x 6.8 x 3.8cm)
JB
TDM1
TDM3
Allows Fixture's own Stem to
Telescope as Foliage Grows.
Ø 4.8” x 14.7” (12.1 x 37.2cm)
Brass Junction Box with (2)
3/4" Side and Bottom taps
Ø 3.8” x 3.0” (9.6 x 7.6cm)
Tree Mount with SS Screws
Ø 3” x 2.7" (flat sides) x 1.5” ext.
(7.6 x 6.8 x 3.8cm)
Low-Profile Canopy
SA Accessory Recommended
Ø 2.75” x 0.75” (7 x 1.9cm)
Mounting & Optical Accessories
TDM4
Canopy with Notch for Wire
SA Accessory Recommended
Ø 2.75” x 0.75” (7 x 1.9cm)
TMJB (single)
Tree-Mounted Junction
Box with Stainless Steel Strap
Ø 3.8" x 1.7” (9.6 x 4.3cm)
TMJB2 (dual)
Tree-Mounted Junction
Box with Stainless Steel Strap
Ø 3.8” x 1.7” (9.6 x 4.3cm)
TMJBX (single) Tree-Mounted Junction
TMJBX installed
Honeycomb Louver
Half Shield with Top Cap (M-/MB-Series)
FR / FR8
RT / RT8
SL
Box with Stainless Steel Screws
Ø 3.8" x 1.7” (9.6 x 4.3cm)
HL1 / HL8 HL2
PR / PR8
⅛” (3mm) thick
¼" (6mm) thick
Prismatic Spread Lens
HSM
HSM-LED
Rectilinear Spread Lens
TMJB2X (dual) Tree-Mounted Junction
Box with Stainless Steel Screws
Ø 3.8" x 1.7” (9.6 x 4.3cm)
Frosted Glass Lens
Solite Lens
35
Finishes
All of Beachside Lighting's fixtures are produced using unfinished brass and copper. Since there is no coating on them,
the fixtures will soon weather to a natural brown color at inland locations and a green finish at near-ocean locations. We
also offer three finish processes: acid wash, nickel plating, and powder coating. Acid washing is available in the six colors
shown below. Though there is a thin, lacquer coating over the finish, in a salt-air environment an acid-finished fixture will
ultimately develop hints of a natural green patina, eventually giving way entirely to this coloring at the closest of oceanfront locations. Brushed nickel plating replicates the look of stainless steel and eliminates the possibility of rust, which
can develop even on stainless steel. The white powder coat finish is for architectural applications, and we recommend
that powder-coated fixtures are used in more protected locations. Because the environment varies from the ocean to the
mountains, we do not warranty any of our finishes. However, unlike powder-coated aluminum fixtures, the specifier has
the peace of mind knowing that Beachside's brass and copper fixtures will withstand the elements, regardless of finish.
FIN-AB
FIN-GM
Antique Brass
Gun Metal
FIN-V Verde
36
FIN-BK
Black
FIN-DB
Dark Bronze
FIN-NK
Brushed Nickel Plating
FIN-RB
Red Bronze
FIN-WH
White Powder Coating
Unfinished Fixture Near Ocean
Transformers / Ballasts
RS Series
RS Series
Electronic Transformers, LED or halogen
RS1215M-LED
RS1230M-LED
RS1260M-LED
15 Watts
30 Watts
60 Watts
Electronic Transformer for halogen (not
recommended for LED)
T80-GW
80 Watts
2.2" L x 1.2" W x 0.75" H
(5.6 x 3.0 x 1.9cm)
TRH
TRH-120V / TRH-230V
Solid Brass, Above-Grade Transformer at
fixture base with ½ " male fitting
TRH-120V
TRH-230V
120 Volt Applications
230 Volt Applications
Led & Halogen
DB Series
RB Series
Metal Halide
Composite Boxes
DB Series
Direct-Burial Transformer
120 Volt input with 12 Volt output tap
DB-150
DB-300
DB-600
150 Watt capacity (1 circuit)
300 Watt capacity (1 circuit)
600 Watt capacity (2 circuits)
Ø 2.4" x 4" H (6.1 x 10.2cm)
RB Series
Remote, Direct-Burial, Metal Halide Ballast
with long-distance igniter. Not for direct
fixture mounting—use other mounting
accessories.
RB-35-120V
RB-70-120V
RB-100-120V
35 Watts
70 Watts
100 Watts
11.8" H x 7.4" W x 4.5" D
(30 x 18.8 x 11.4cm)
MPT600 Terminal Block
MTP Series
GL200
GL Series
MTP300
Stainless Steel Transformer
120V input with 12 & 15 Volt output taps
GL100
GL200
120V input with 11 – 15 Volt output taps
100 Watt capacity
200 Watt capacity
11.3" H x 5.75" W x 5.5" D
(28.7 x 14.6 x 14cm)
GL Smart Series
Bluetooth controlled
120V input with 12 & 15 Volt output taps
GL150-1-SMART
GL150-2-SMART
GL300-2-SMART
21" H x 6.6" W x 3.6" D
(53.3 x 16.8 x 9cm)
single 150W circuit
dual 75W circuits
dual 150W circuits
300 Watt capacity
14" H x 6.5" W x 5.5" D
(35.5 x 16.5 x 14cm)
MTP600
MTP1200
600 Watt capacity
1200 Watt capacity
17" H x 9" W x 5.5" D
(43 x 22.8 x 15.2cm)
Control Options for GL- / MTP-Series
(add as suffix to model)
T
P
TP
DT
TRP
Mechanical plug-in Timer
Photocell, field installed
Photocell kit with Timer
Digital Timer with battery backup
Remote Photocell on 20' cord with
2 – 8 hour Timer
SB Series
SB Series
Aluminum, Wall-Mounted, Metal Halide
Ballast with long-distance igniter
SB-35-120V
SB-70-120V
SB-100-120V
35 Watts
70 Watts
100 Watts
7" H x 6" W x 4" D
(17.8 x 15.3 x 10.2cm)
37
Traditional Conical Torches
TK-1-P
TK-1-N
TK-1-P
(Natural Gas)
(Propane Gas)
Ø 7.5" base x 11.5" high (19 x 29cm)
• Pole by others
Construction:
18 ga. spun copper (seamless, 0.043" thick).
Solid brass machined fittings.
Perforated stainless steel top screen.
Gas Consumption:
TK-1-N: 22,500 Btu/h (at 7" water column)
TK-1-P: 14,600 Btu/h (at 11" water column)
Installation:
1" NPT female brass adapter to connect
to 1" NPT male pipe (by others). 1" brass
valve included. Consult installation diagram.
Ignition:
Manual ignition with extended lighter.
CSA / AGA Design Certified
per IAS Requirement 8-96
(#190030-1711907)
TK-1-K
(Kerosene / Citronella)
Ø 7.5" base x 9.5" high (19 x 24cm)
• Pole by others
Construction:
18 ga. spun copper (seamless, 0.043" thick).
Solid brass machined fittings
Fuel:
Kerosene or Citronella, 45 oz capacity
Wick:
Braided cotton torch wick
Ø 1" x 12" long
Pole:
Photo courtesy of HAWAI`I GAS
38
TK-1-K
1" copper with male adapter (by others) or
Galvanized steel (by others)
Malama™ Torches
The Malama™ torch was created by native Hawaiian artist Donald Namohala
Yuen in 1967. Today, his daughter Leilehua Yuen and her husband, Manu Josiah,
continue to handcraft each decorative stainless steel Malama™ Torch cylinder
used with Beachside's burner assembly.
Natural Gas Torches
Bird of Paradise
TK-N-BOP
TK-N-OHE
Bamboo
TK-N-PUA
Plumeria
Propane Gas Torches
Bird of Paradise
TK-P-BOP
TK-P-OHE
Bamboo
TK-P-PUA
Plumeria
Ø 3.8" x 16" high (9.6 x 40.6cm)
* Pole by others
BOP
Bird of Paradise
Construction:
26 ga. stainless steel cylinder and base.
Solid brass machined fittings.
Perforated stainless steel top screen.
Gas Consumption:
TK-N: 22,000 Btu/h (at 7" water column)
TK-P: 15,000 Btu/h (at 11" water column)
Installation:
1" NPT female brass adapter to connect
to 1" NPT male pipe (by others). 1" brass
valve included. Consult installation diagram.
Ignition:
CSA / AGA Design Certified
per IAS Requirement 8-96
(#190030-1711907)
Manual ignition with extended lighter.
TK-N-PUA Custom in Waikiki
OHE
Bamboo
PUA
Plumeria
39
BeachsideLighting.com (800) 405 - 6732 (808) 263 - 5717
905 Kalanianaole Highway #29A, Kailua, Hawaii USA

to view our printed catalog in PDF format, .

Transcription

Similar documents