Filtration

F
I
B
E
R
T
E
X
N
O
Filtration
High performance air, liquid and odour filter media
www.fibertex.com
N
W
O
V
E
N
S
Technological leadership
Fibertex is a diversified and global supplier of
nonwovens based on the latest needlepunch,
spunmelt and thermal bonding technologies.
Through close cooperation with leading research
institutes, Fibertex is at the cutting edge of
innovation in engineered fabric solutions. As
a result, commercial nanofibre-based products are
Air filtration
available.
Fibertex produces a wide range of needlepunched
filter media with high air permeability, superior
Liquid filtration
Fibertex efficient filter media
dust-holding capacity and low tolerances. All
Fibertex offers a full range of needlepunched filter
Fibertex offers a wide selection of needlepunched
products have high burst strength and good
media with high flow capacity and good retention
and thermally bonded filter media. Many years
abrasion resistance. Fibertex offers hydrophobic
properties and micron-rated 1-200 μm. Fibertex
of experience and manufacturing excellence
and hydro/oleophobic treatments and special
filter media are manufactured from FDA/EC-
combined with a wide range of surface treatments
media with antistatic properties. Thermally bonded
compliant material which qualifies the products for
enable us to provide our customers with efficient
high loft filter media are also available.
food-grade applications amongst others.
filter media.
Needlepunched
filter media
Thermally bonded
filter media
Filter class
Filter class
F5-F7
G2-F5
Certification
according to
Needlepunched
filter media
FDA/EC
1-200 μm
Micron rating
High performance filtration
air, liquid and odour
Innovation and partnership
Fibertex invites its customers to participate in the
development of innovative filter media for different
applications. Technical leadership and innovation
add value to customised products. Teamwork with
our customer´s specialists is the basis of close and
Odour filtration
Nanofibres
High-quality nonwovens with activated carbon.
Fibertex has conducted extensive research into
Capable of adsorbing smells, smoke and liquids.
nanofibres and launched commercial products. The
Reliable nonwoven supply chain
Sorption filters are combined with standard
main benefits of Fibertex nanofibre filter media are
The Fibertex supply chain is an ongoing process
filtration materials for mechanical filtration.
increased filtration efficiency with lower pressure
to ensure that the demands of our customers are
Excellent lifetime and utility properties.
drop compared to conventional filter media.
fulfilled. It greatly contributes to maintaining our
To further improve the properties, odour filters
Moreover, the increased active surface area of the
superior level of technical support, R&D, logistics,
can be combined with pre-filters.
nanofibres and the small pore size deviation ensure
production and quality in all areas. All for the
unparalleled filter media performance.
benefit of our customers.
Active carbon
surface area per m2
Flame
retardancy
Nanofibre
air filtration
Nanofibre
liquid filtration
Filter class
Mean flow pore size
40,000-270,000 m2
FH2/F1
F, HEPA, ULPA
0.15-100 μm
beneficial cooperation.
Challenge us!
I N N O V A T I O N
A N D
P A R T N E R S H I P
Making the perfect match
Fibertex has a long history of developing products with and on behalf of our
customers and cultivating enduring relationships with them.
We focus on the development of new products and applications. Much of the
development takes place in close cooperation with our customers and their
specialists. We give our customers not only what they expect, but what they
actually need. We call it “making the perfect match”.
Contact us and let us explore how our nonwovens can add value to your products.
Your preferred business partner
International team of
nonwoven experts
Technological leadership and
innovation
Fibertex supply chain - superior
level of technical support and
customer service from initial
contact to delivery and
after-sales service
Long-term commitment in
development, sales and
supporting partnerships

Challenge us!
Fibertex has expertise in
Lamination
Powdering
Printing
Flame retardancy
High temperature
Hydrophobicity
Hydro/oleophobicity

Needlepunching
Nanofibre-based products
Thermal bonding
Combining technologies
Impregnation
Coating



N A N O F I B R E S
Air filtration
Filter media in filter classes F, HEPA and ULPA.
Low pressure drop and increased
air permeability
High surface area
Improved dust cake release properties
Hydrophobic/hydrophilic surface characteristics

Liquid filtration
Filter media with mean flow pore size
0.15-100 μm.
Low pressure drop and increased water flow
High surface area
Small pore size deviation
Nanotechnology
Fibertex has conducted extensive research into nanofibres which has resulted in
the launch of commercial products. The main benefit of Fibertex nanofibre in
filter media is increased filtration efficiency with lower pressure drop compared
to conventional filter media. The increased active surface area of the nanofibres
and the small pore size deviation ensure unparalleled filter media performance.
Why low pressure drop using nanofibres?
....Less non-permeable surface area of fibres significantly increases porocity.
Magnified 400 x
Magnified 25,000 x
Magnified 280,000 x
Did you know that...
One
gram of 100 nm nanofibre has 120 times bigger surface area
than one gram of 12.5 μm microfibre.
15,000 100 nm nanofibres are equivalent to one 12.5 μm microfibre.



200 μm



2 μm
This changes filtration properties radically!
200 nm
A I R
F I LT R A T I O N
Fibertex produces a wide range of needlepunched filter
media with high air permeability, superior dust-holding
capacity and low tolerances. All products have high
burst strength and good abrasion resistance.
Fibertex offers hydrophobic and hydro/oleophobic
treatments and special media with antistatic properties.
Thermally bonded high loft filter media are also
available.
Needlepunched
filter media
Thermally bonded
filter media
Filter class
Filter class
F5-F7
G2-F5
Antistatic
A p p l i c a t i o n s
Bag house filters
Cement plants
Lime kilns
Steel processing
Wood/paper processing

Asphalt bitumen processing
Extreme environments
Air-conditioning units
Ventilation systems
Spray boxes


O D O U R
F I LT R A T I O N
O
G
P
High-quality nonwovens with activated carbon. Capable
of adsorbing smells, smoke and liquids. Sorption filters are
combined with standard filtration materials for mechanical
filtration. Excellent lifetime and utility properties.
To further improve the properties, odour filters can be
combined with pre-filters.
Active carbon
surface area per m2
Flame
retardancy
40,000-270,000 m2
FH2/F1
A p p l i c a t i o n s
Cooker hoods
Fryers
Refrigerators
Vacuum cleaners
Chemical protection suits




L I Q U I D
F I LT R A T I O N
A p p l i c a t i o n s
Chemical filtration
Ceramic filtration
Food and beverage filtration
Industrial coolant oil filtration
Industrial oil filtration
Machine tool emulsion filtration

Fibertex offers a full range of needlepunched filter
media with high flow capacity and good retention
properties and micron-rated 1-200 μm. Fibertex filter
media are manufactured from FDA/EC-compliant
material which qualifies the products for food-grade
applications amongst others.
Certification
according to
Needlepunched
filter media
Micron rating
FDA/EC
1-200 μm
Denmark
Facts about Fibertex
Fibertex Nonwovens A/S is a market-leading manufacturer of
USA
France
Czech Republic
nonwovens for industrial and technical applications.
With
corporate
office
in
Aalborg,
Denmark,
and
manufacturing sites in Denmark, the Czech Republic, France,
the USA and South Africa, Fibertex is globally represented.
Since its foundation in 1968, Fibertex has continuously
expanded and today manufactures nonwovens for customers
all over the world for many different applications.
South Africa
Fibertex is certified according to EN ISO 9001 and 14001.
Q-Match® - digitally integrated quality management system - provides
instant electronic control of product quality and process capability.
Fibertex Nonwovens A/S
Svendborgvej 16
DK-9220 Aalborg
Denmark
Tel. +45 96 35 35 35
Fax +45 98 15 85 55
[email protected]
www.fibertex.com
Fibertex Nonwovens, a.s.
Prumyslova 2179/20
CZ-568 23 Svitavy
Czech Republic
Tel. +420 461 573 211
Fax +420 461 541 437
[email protected]
Fibertex Nonwovens S.A.S.
3-5 rue de la Croix Renaudeau
Z.I. de la Pierre Blanche
B.P. 49 - 49120 Chemillé – France
Tél. +33 (0)2 41 71 55 55
Fax +33 (0)2 41 71 55 78
[email protected]
Fibertex Nonwovens LLC
27981 W. Concrete Drive
Ingleside, IL 60041
USA
Tel. +001 866 697 0277
Fax +001 815 344 2165
[email protected]
www.nonwovensolutions.com
Fibertex South Africa (Pty) Ltd.
16 Van Eck Avenue
Hammarsdale 3700
ZA-KwaZulu Natal – South Africa
Tel. +27 (0)31 700 6657
Fax +27 (0)31 700 6659
[email protected]