Www Glasstec Online Com Mycatalog Glasstec

Transcription

www.glasstec-online.com
MyCatalog glasstec
Personal Guide For:
Email : Product category: 01 - Glass production/Production Technology
Messe Düsseldorf GmbH
Postfach 101006
40001 Düsseldorf
Germany
Tel. +49 (0)211 / 45 60-01
Fax +49 (0)211 / 45 60-668
www.messe-duesseldorf.de
© 2008
2004Messe
MesseDüsseldorf
Düsseldorf
©
Search Criteria:
-
Exhibitors with address and hall location
Hall map for each exhibitor
News / Product News
Product groups with descriptions and illustrations
glasstec
glasstec
International Tradefair with Special Show + Symposium glass technology live
MyCatalog
MyCatalog
TABLE OF CONTENTS
Exhibitor Overview ............................................................................ 1189 - 1426
A. & L. Rondot S.A.S. ................................................................................ 1189
AB Fejmert Patent ..................................................................................... 1190
Advantech S.p.A. ....................................................................................... 1191
AEG Power Supply Systems GmbH ......................................................... 1191
AGC Ceramics Co., Ltd. ............................................................................ 1192
AGK Hochleistungswerkstoffe GmbH ....................................................... 1193
AIR LIQUIDE S.A. ..................................................................................... 1193
Alfaref GmbH ............................................................................................. 1194
All Glass S.r.l ............................................................................................. 1194
AMBEG Dr. J. Dichter GmbH .................................................................... 1195
Anglo Carbon ............................................................................................ 1196
Antonini S.r.l. ............................................................................................. 1197
APB Antonio Piazza Brevetti S.r.l. ............................................................ 1198
Armatec Vierhaus GmbH .......................................................................... 1199
Batisti Meccanica S.r.l. .............................................................................. 1204
BDF INDUSTRIES S.p.A. .......................................................................... 1205
Beijing Ruitai High-temperature Materials & Technology Co., Ltd. ........... 1206
Beijing Trend Hi-Tech Insulating Materials Co., Ltd. ................................. 1206
Bekintex N.V. ............................................................................................. 1207
Beneq ........................................................................................................ 1207
Benteler Maschinenbau GmbH ................................................................. 1209
BERNARD ET BONNEFOND ................................................................... 1209
Bock Energietechnik .................................................................................. 1210
Bohemia Machine, s.r.o. ............................................................................ 1210
Bonaiti Pietro s.n.c. ................................................................................... 1211
Bosch Rexroth AG, Vertrieb Deutschland ................................................. 1212
Bottero ....................................................................................................... 1213
BSH Fahrzeugkomponenten ..................................................................... 1214
Busellato Glass Moulds S.r.l. .................................................................... 1214
Bystronic Maschinen AG ........................................................................... 1215
C.RE.F.IN. S.r.l. ......................................................................................... 1221
© 2008 Messe Düsseldorf
1185
glasstec
glasstec
MyCatalog
Carbone Lorraine Composants S.A.S. ......................................................
Car-Met S.p.A. ...........................................................................................
Cestaro s.n.c. ............................................................................................
Changshu Brother Glass Mould Co., Ltd. .................................................
Changshu Jianhua Die Sets Co., Ltd. .......................................................
Changshu Jinggong Mould Mfg Co., Ltd. ..................................................
Changshu Weiheng Mould Manufacture Co., Ltd. ....................................
China Starlight Refractory Co., Ltd. ..........................................................
Cimec Oy ...................................................................................................
COMIT S.r.l. ..............................................................................................
COMIT S.r.l. ..............................................................................................
COMMERSALD IMPIANTI S.r.l. ................................................................
Condat Lubrifiants .....................................................................................
CONMAC GmbH, Maeda-Minikrane .........................................................
Control & Heating Systems .......................................................................
Cugher Glass S.r.l. ....................................................................................
De Raedt Industrial Fans ..........................................................................
DMA Maschinen- und Anlagenbau GmbH & Co. KG ................................
Dornbusch Gravuren GmbH .....................................................................
DSF Refractories & Minerals Ltd ...............................................................
Dura Temp Corporation ............................................................................
Eclipse, Inc. ...............................................................................................
EGLASS Machinery & Parts GmbH ..........................................................
Eirich GmbH & Co KG, Gustav, Maschinenfabrik .....................................
Electroglass Ltd .........................................................................................
ELIOG-kelvitherm Industrieofenbau GmbH ..............................................
EME Maschinenfabrik Clasen GmbH ........................................................
Emhart Glass SA .......................................................................................
Emmeti S.p.A. ...........................................................................................
Essemce AB ..............................................................................................
EuroGlassMachinery S.r.l. ........................................................................
EUROMATIC S.r.l. ....................................................................................
Eurostar Concrete Technology S.p.A. .......................................................
EURO-TECH Vacuum ...............................................................................
ExCelsius Global Services GmbH .............................................................
1221
1222
1223
1223
1224
1224
1225
1225
1226
1227
1227
1227
1228
1231
1232
1232
1233
1233
1234
1234
1235
1235
1237
1237
1238
1239
1239
1240
1252
1252
1253
1254
1254
1255
1256
MyCatalog
Falorni Gianfranco S.r.l. ............................................................................
Ferlam Technologies .................................................................................
FIB-SERVICES S.A. ..................................................................................
Fickert + Winterling, Maschinenbau GmbH ...............................................
FICO Industrie ...........................................................................................
Fima Olimpia Fonderie S.p.A. ...................................................................
FINNTEMP Oy ..........................................................................................
FIVES STEIN ............................................................................................
FIVES STEIN Ltd. .....................................................................................
Fonderie Bartalesi S.r.l. .............................................................................
Fonderie Valdelsane S.p.A. ......................................................................
FOND METALLI CONVEYORS S.r.l. ........................................................
FOR G, s.r.o. .............................................................................................
Forma Glas GmbH ....................................................................................
FORTE S.r.l. ..............................................................................................
Franke Industrieofen-Service ....................................................................
Fuchs Lubritech GmbH .............................................................................
Füller Glastechnologie Vertriebs-GmbH ...................................................
futronic GmbH ...........................................................................................
GEROLD GmbH & Co. KG, Maschinenbau ..............................................
Giardina Officine Aeromeccaniche ............................................................
Glamaco Maschinenbau GmbH ................................................................
Glasinvest Engineering und Anlagenbau GmbH .......................................
GLASMA AB ..............................................................................................
Glass Service Inc. .....................................................................................
Glass Service S.r.l. ....................................................................................
Glass Technologies S.r.l. ..........................................................................
Glass Technology International GmbH .....................................................
Glassworks Hounsell .................................................................................
G-Lehrs .....................................................................................................
GPM_Glass Project Management and Used Equipment ..........................
GPS Glasproduktions-Service GmbH .......................................................
Grafix GmbH .............................................................................................
Grafotec Spray Systems GmbH ................................................................
Graphoidal Developments Ltd. ..................................................................
1256
1257
1257
1258
1259
1259
1259
1260
1262
1263
1264
1264
1265
1265
1266
1267
1267
1268
1268
1269
1269
1270
1271
1271
1272
1273
1273
1274
1275
1276
1277
1277
1278
1279
1283
1186
glasstec
glasstec
MyCatalog
Grenzebach Maschinenbau GmbH ...........................................................
Grob GmbH, Glashüttentechnik - Glasofenbau ........................................
Gronemeyer Maschinenfabrik GmbH & Co. ..............................................
Hager Sondermaschinenbau GmbH .........................................................
Hamad M. Aldrees & Partners Company for Industry & Mining ................
Hartmann & Bender Vertriebs- und Produktionsgesellschaft mbH ...........
Heavydrive ................................................................................................
HEGLA GmbH & Co. KG ...........................................................................
Henan Chief Way Industry Co. LTD. .........................................................
HEYE International GmbH ........................................................................
HORN Glass Industries AG .......................................................................
Hotwork International AG ..........................................................................
Huailai Tianyuan Special Type Glass Co., Ltd. .........................................
HUBTEX Maschinenbau GmbH & Co. KG ................................................
Humanglass Machine Engineering Co., Ltd. .............................................
HyGear BV ................................................................................................
HyRadix, Inc. .............................................................................................
I.S. Maintenance Ltd .................................................................................
IfG GmbH Ingenieurbüro für Glastechnik ..................................................
Inspection Systems ...................................................................................
Intco GmbH ...............................................................................................
Interglass, S.A. de C.V. .............................................................................
IPROTec GmbH & Co. KG ........................................................................
I-Scan Robotics Ltd. ..................................................................................
Italcarrelli S.r.l. ...........................................................................................
IWG Ingenieurbüro Wagenbauer Glasofenbau GmbH .............................
JCL Engineering Pte Ltd ...........................................................................
Johnson Matthey Noble Metals .................................................................
JSJ Jodeit GmbH ......................................................................................
JUTEC Hitzeschutz GmbH ........................................................................
K. Schulten GmbH & Co. KG ....................................................................
Kaltun Mining Co. ......................................................................................
Kanthal, ZN der Sandvik GmbH ................................................................
Kararmaz Kalip San. ve Tic. Ltd. Sti. ........................................................
Keraglass Engineering ..............................................................................
1284
1287
1288
1289
1290
1290
1291
1291
1293
1293
1294
1295
1296
1296
1298
1298
1299
1300
1300
1301
1301
1302
1302
1303
1304
1304
1305
1306
1307
1308
1309
1310
1310
1311
1311
MyCatalog
Khavar Bolour e Tehran Co. ..................................................................... 1312
King's Metal Fiber Technologies Co., Ltd. ................................................. 1312
Körting Hannover AG, Bereich W, Industrie- und Prozesswärme,
Feuerungstechnik ...................................................................................... 1313
KREISEL GmbH & Co. KG ........................................................................ 1314
KRS Recycling Systems GmbH ................................................................ 1315
KSO-GOBI Ofenbau GmbH ...................................................................... 1316
Lahti Precision Oy ..................................................................................... 1316
Lane & Sons Ltd., George ......................................................................... 1317
Langendorf GmbH ..................................................................................... 1317
Langendorf GmbH ..................................................................................... 1318
Lansing Fahrzeugbau GmbH .................................................................... 1318
LAT Antriebstechnik GmbH & Co. KG ...................................................... 1318
Lattimer Ltd ............................................................................................... 1319
Lincoln GmbH, Zentralschmiersysteme .................................................... 1320
Linde AG, Linde Gas Division ................................................................... 1321
Logicon Engineers Pvt. Ltd. ...................................................................... 1322
Logistic System Pichler GmbH .................................................................. 1324
Löwinger GmbH, Glasbearbeitungsmaschinenbau ................................... 1324
LWN Lufttechnik GmbH ............................................................................. 1325
M.E. SCHUPP Industriekeramik GmbH & Co. KG .................................... 1325
M.T. Forni Industriali S.r.l. ......................................................................... 1330
Maquinas Argentinas del Vidrio S.A. (Mavsa) ........................................... 1330
Mario Argiro s.r.l. ....................................................................................... 1331
MAXON GmbH .......................................................................................... 1331
Merkad Makina Kalip San. ve Tic. Ltd. Sti. ............................................... 1332
Merker GmbH, Kurt ................................................................................... 1334
Merkle International, Inc. ........................................................................... 1336
Métal Industriel de Chauny ....................................................................... 1336
Metavil, Lda ............................................................................................... 1337
METRA ...................................................................................................... 1337
Mistrello Officine S.r.l. ............................................................................... 1338
Mixer Systems ........................................................................................... 1338
MOCAP Deutschland Ltd. ......................................................................... 1339
MOPAVID, S.L. ......................................................................................... 1339
1187
glasstec
glasstec
MyCatalog
Movomech Systems GmbH ......................................................................
MSC INSPECTION WORLDWIDE ...........................................................
MSK Verpackungs-Systeme GmbH ..........................................................
Nabertherm GmbH ....................................................................................
Nanjing Xinshu Machinery Co., Ltd ...........................................................
Nirvana Technologies (P) Ltd. ...................................................................
NOL-TEC EUROPE S.r.l. ..........................................................................
Norddeutsche Seekabelwerke GmbH .......................................................
North American Refractories Co. ..............................................................
NOV S.r.l. ..................................................................................................
O.I.M.M., Officine Italian Mould Makers ....................................................
OCL INDIA Limited ....................................................................................
OCMI-OTG S.p.A. .....................................................................................
Officina Meccanica Sestese ......................................................................
Olivotto Glass Technologies S.p.A. ...........................................................
Omco International N.V. ............................................................................
Optima S.r.l. ..............................................................................................
Ori-Mould Technology Co., Ltd. ................................................................
OSC S.P.A. Glass Mould Factory .............................................................
Pannkoke Flachglastechnik GmbH ...........................................................
Parkinson-Spencer Refractories Ltd .........................................................
P-D Refractories Group, Feuerfestwerke Wetro .......................................
PEMCO International c/o PEMCO Emails S.r.l. ........................................
Penelectro Limited .....................................................................................
Pennekamp GmbH & Co. OHG, Ernst ......................................................
Pennine Industrial Equipment Ltd .............................................................
PKI-Teplotechna Brno spol. s.r.o. .............................................................
PLANSEE Metall GmbH ............................................................................
Pneumofore S.p.A. ....................................................................................
promeos GmbH .........................................................................................
Pt. Dyson Zedmark Indonesia ...................................................................
Putsch GmbH & Co. KG ............................................................................
Putsch Meniconi S.p.A. .............................................................................
Quantum Engineered Products, Inc. .........................................................
Ramsey Products Corp. ............................................................................
1340
1340
1342
1342
1343
1344
1346
1346
1347
1348
1349
1349
1350
1350
1351
1357
1357
1358
1358
1359
1359
1360
1361
1361
1362
1364
1365
1365
1366
1369
1370
1370
1371
1372
1372
MyCatalog
Rath AG .....................................................................................................
RESCAL S.A. ............................................................................................
Resim s.r.o. ...............................................................................................
RHI Glas GmbH ........................................................................................
RUREX-STAHL Dr. Otto Kukla GmbH ......................................................
S.I.G.MA. S.r.l. Refrattari Tecnici Industriali ..............................................
Saati S.p.A. ...............................................................................................
Saint-Gobain SEFPRO ..............................................................................
SAXONIA Edelmetalle GmbH ...................................................................
SCHRADER Glasformenbau GmbH & Co. KG .........................................
Schunk Kohlenstofftechnik GmbH ............................................................
SGCC Inspection Worldwide .....................................................................
Shandong Sanjin Glass Machinery Co., Ltd. ............................................
Shanghai Hengye Chemical Industry Co., Ltd ..........................................
Shanghai SGMT Glass Mach-Tech Co., Ltd. ............................................
Sheppee International Ltd. ........................................................................
Sicatec GmbH - Sintered Carbon Technologies .......................................
Siebenlist Glas-Schmelzofen-Technik ......................................................
SIMTECH ..................................................................................................
Sipac S.p.A. ...............................................................................................
Sklostroj Turnov CZ s.r.o. ..........................................................................
SMT Lager- und Transportsysteme GmbH ...............................................
Sogelub S.A. .............................................................................................
Special Ceramics (P) Ltd. ..........................................................................
Stewart Engineers .....................................................................................
STG Software & Technologie Glas GmbH Cottbus ..................................
Strada S.r.l. ...............................................................................................
Studio 1 Automazioni Industriali s.r.l. ........................................................
SVEMA s.a.s. ............................................................................................
System RES S.a.r.l. ...................................................................................
Talamoni s.n.c. ..........................................................................................
TECHGLASS Sp. z o.o., Przedsiebiorstwo B.P.H. ...................................
TEKA Maschinenbau GmbH .....................................................................
THIMON ....................................................................................................
THK GmbH ................................................................................................
1373
1374
1374
1375
1376
1378
1379
1379
1380
1381
1381
1382
1384
1384
1385
1385
1385
1387
1387
1389
1389
1393
1394
1394
1395
1396
1396
1398
1398
1399
1400
1400
1402
1403
1403
1188
glasstec
glasstec
MyCatalog
TIBTECH innovations ................................................................................ 1404
Tiffany Glas Kunst GmbH (TGK) ............................................................... 1405
Toledo Engineering Co., Inc. ..................................................................... 1406
UAS Messtechnik GmbH .......................................................................... 1406
UNGRICHT Roller + Engraving Technology ............................................. 1407
Valoref ....................................................................................................... 1408
Van Huët Glass Logistics .......................................................................... 1409
VESTA / ÖZMAK Mühendislik Mimarlik San. ve. Tic. Ltd. Sti. .................. 1409
Vidromecanica ........................................................................................... 1410
Viprotron GmbH ........................................................................................ 1411
Vision Electric GmbH ................................................................................ 1412
VITRUMA GmbH & Co. KG ....................................................................... 1412
VSS - engineering comp. GmbH ............................................................... 1413
VVV MOST spol. s r.o. .............................................................................. 1415
W. Haldenwanger GmbH & Co. KG, Technische Keramik ....................... 1415
WALTEC Maschinen GmbH ..................................................................... 1416
Webber Brennertechnik GmbH ................................................................. 1417
Weifang Sanjiang Glass Machinery Co., Ltd ............................................. 1418
Wieland Lufttechnik GmbH & Co.KG ........................................................ 1418
WITT-Gasetechnik GmbH & Co. KG ......................................................... 1419
Xinmi Zhongyuan Special Refractory Material Co., Ltd. ........................... 1420
Ying Chang Machinery Co., LTD. ............................................................. 1420
Z&J Technologies GmbH, Zimmermann & Jansen ................................... 1421
Zak ady Magnezytowe Ropczyce S.A. ...................................................... 1422
Zecchetti S.r.l. ........................................................................................... 1422
Zhengzhou Ancai Refractory Co., Ltd ....................................................... 1423
Zhengzhou Yuandong Refractory Co., Ltd. ............................................... 1424
Zhengzhou Zhenzhong Fused Zirconia Co., Ltd. ...................................... 1424
ZIBO KENHAN REFRACTORY MATERIALS CO., LTD .......................... 1425
ZIPPE Industrieanlagen GmbH ................................................................. 1425
Zircor Electrofusion S.A. ............................................................................ 1426
Fairground Map ............................................................................................ 1427
Hall Map ............................................................................................ 1428 - 1442
MyCatalog
A. & L. Rondot S.A.S.
Address 9, rue Jean Elysée Dupuy
69410 Champagne au Mont d'Or
France
Telephone +33 4 72520860
Fax +33 4 78474866
Internet Address www.specialtyrondot.com
EMail [email protected]
Booth Hall 13 C35
PRODUCT OVERVIEW
01.06.12 Bottle and glass container machines
01.06.16 Spray Systems for gob forming
01.06.17 Aids for the forming of hollow glass
01.09.02 Stacker systems
01.12.02 Cold end coating
02.13.01 Components and accessories (suppliers to the glass machinery industry)
05.01.01.05 Measurement and control of glass temperature
05.01.01.06 Measurement and control of speed
PRODUCT DETAILS
STAINLESS STEEL SCOOPS/TROUGHS
RONDOT STAINLESS STEEL SCOOPS
Available in air-ride or water-cooled styles. Scoops require no coating or
treatment, improves sliding effect and lasts much longer than conventional
scoops.
SPECIALTY RONDOT STAINLESS STEEL TROUGHS
Air-cooled eliminates the need for coatings. Offers corrosion and oxidation
resistance as well as long term life while being almost maintenance-free.
RONDOT CAST IRON TROUGHS
High precision machined equipment, special dimensions for perfume and
pharmaceutical containers.
Link zu weiterer Information
1189
glasstec
glasstec
http://www.specialtyrondot.com/products.html
GRAPHOIDAL SHEAR SPRAY BARS
Provides maximum blade cooling and lubrication, while using the minimum
amount of emulsion. Available for all types of shear mechanisms and
center distances.
GRAPHOIDAL SHEAR SPRAY SYSTEMS
Individual modules control emulsion ratios, bacteria, acidity, pressure and
temperature. Eliminates oil waste and customizes shearing operation.
Available for both central and single shop systems. The systems offer
reliability and consistency.
AB Fejmert Patent
Address 611 23 Nyköping
Sweden
Telephone +46 155 58200
MyCatalog
MyCatalog
Mixers for the above industries are our speciality - contact us!
All Fejmert Mixers can be equipped with a material hoisting skip of a
remarkably sturdy design, which in addition can be fitted with an electronic
weighing system.
The speed of the skip and the length and inclination of track is
custom-adapted to suit each specific installation.
FP-RM Range of Mixers
This mixer type is focused mainly on the Ready-Mix Sector, available in five
different models, from 2250 to 6000 litres input capacity.
S Range of Mixers
The S Range of mixers is commonly used in the Concrete Products and
Precast Industry and is available in twelve different models, from 150 to
6000 litres input capacity.
Fax +46 155 58179
Internet Address www.fejmert.se
Booth Hall 15 D01
PRODUCT OVERVIEW
01.03.04 Mixing technology
PRODUCT DETAILS
Glass and Ash Mixers
1190
glasstec
glasstec
Advantech S.p.A.
MyCatalog
MyCatalog
All machines can be supplied in standard dimensions, or specially build as
per customers` needs and specifications.
01.08.02 Rock wool technology
Address V.le Tunisia 43
20124 Milano
Italy
Telephone +39 02 634706-11
Fax +39 02 634706-12
Internet Address www.advan-tech.net
Booth Hall 13 D62
PRODUCT OVERVIEW
01.08.01 Glass wool technology
06 Contracting, consulting, engineering
PRODUCT DETAILS
Glasswool
Advantech manufactures complete production lines and single machines
and equipment, using his own developed technology. Machines are based
on revised off-center technology, and incorporate many developments and
improvements.
Product specifications
Fiberizing
Forming
Curing
Facing
Cutting
Packing
Binder plants
Water treatments
Emission treatments
Control systems
Rockwoll
Advantech manufactures complete production lines and single machines
and equipment, using his own developed technology. Machines are based
on revised fiberizing technology, and incorporate many developments and
improvements.
Product specifications
Fiberizing
Forming
Curing
Facing
Cutting
Packing
Binder plants
Water treatments
Emission treatments
Control systems
Advantech supplies complete new production lines and single machines for
modernization of existing plants.
All machines can be supplied in standard dimensions, or specially build as
per customers` needs and specifications.
AEG Power Supply Systems GmbH
Address Emil-Siepmann-Str. 32
59581 Warstein
Germany
Telephone +49 2902 763-520
Fax +49 2902 763-1201
Internet Address www.powersupplysystems.com
Booth Hall 11 F40
Advantech supplies complete new production lines and single machines for
modernization of existing plants.
1191
glasstec
glasstec
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
01.04.08 Electrically heated systems
01.05.01 Float glass technique
01.09.03 Annealing lehrs, continuous/intermittent operation
01.09.05 Pre-heating furnaces
02.06.01 Vacuum coating equipment
02.06.05 Dryers and decorating technology
02.07.02 Components and accessories for display glass technology
MyCatalog
01.02.01 Refractory materials
Bonded Refactories
Asahi Glass Ceramics Co. Ltd. produces a variety of bonded refractories
including basic burned/unburned bricks, High-alumina burned/unburned
bricks, fireclay burned/unburned bricks, graphite containing
burned/unburned bricks and special bricks for steel refining and glass
melting furnaces. We produce a variety of mortar according to the bricks
used.
03.01.01 Float and mirror glass
PRODUCT DETAILS
Basic bricks
There are three types of basic bricks: those mainly of spinel, highly pure
magnesia clinker, and dolomite.
Thyristor Power Controller - Thyro-Family
Our Experience for your Quality - worldwide
Industrial heating with Power Controller of the AEG Thyro-Family stands for
quality, reliability, reproducibility, accuracy and comminication capability as
essential features of the future orientated Thyro-Family.
Applications for glass melting furnace
Magnesia bricks
PB-98G, PB-98S, G-MG-95, UB-M
Magnesia-zircon bricks
MZ-HG, MZ-SG
Magnesia-spinel bricks
PSB-A3
AGC Ceramics Co., Ltd.
Applications for cement kilns
Address 4-1-23, Shiba, Minato-ku
108-0014 Tokyo
Japan
Telephone +81 3 5442-9177
Fax +81 3 5442-9180
Chrome-free bricks
BNC-55, BNC-44
Magnesia-spinel bricks
PSB-A10, HAS-50
Applications for nonferrous metal melting furnaces
Internet Address www.agcc.jp
Magnesia-chromea bricks
NSX-750, CKL-750, MAC-BDS-70, MAC-BD-70
Booth Hall 13 B57
PRODUCT OVERVIEW
High-alumina bricks
High-alumina bricks consist mainly of an electro-fused material of
corundum or corundum-mullite.
1192
glasstec
glasstec
MyCatalog
MyCatalog
01.09.01 Transport systems
Applications for glass melting furnace
High-alumina bricks
CWK-3, CWR-6
GleitTherm® - Gleitschiene
Überall wo unter hohen Temperaturen transportiert und gefördert werden
muss, kommen Gleitschienen und Kettengleitschienen aus GleitTherm®
zum Einsatz
Applications for cement kilns
High-alumina bricks
CWK-36
http://www.agk-werkstoffe.de/html/gleitwerkstoffe.htm
AGK Hochleistungswerkstoffe GmbH
Address Fallgatter 8
44369 Dortmund
Germany
GleitTherm®
GleitTherm® bieten wir sowohl für den Heißglaskontakt an, als auch als
Einschiebedreiecke für den Kühlofen.
Telephone +49 231 936964-0
Fax +49 231 936964-50
Internet Address www.agk.eu
http://www.agk-werkstoffe.de/html/glashuetten.htm
Booth Hall 13 E21
AIR LIQUIDE S.A.
PRODUCT OVERVIEW
02.11.02 Replacement and spare parts
02.11.03 Insulating C203materials
03.06.02 Braided wire hoses and straps made of fibreglass
04.04 Replacement part, wearing parts
PRODUCT DETAILS
K-Therm®
Address 75 Quai d'Orsay
75321 Paris
France
Telephone +33 1 40625555
Fax
Internet Address www.airliquide.com
Booth Hall 13 F29
PRODUCT OVERVIEW
01.02.02 Industrial gases
01.04.02 Forehearth technology
1193
glasstec
glasstec
MyCatalog
MyCatalog
01.04.09.02 Combustion technology for oxygen heating systems
01.04.10 NOx control technology
02.08.05 Gas filling machines and gas devices
PRODUCT DETAILS
NOx Control
Alfaref GmbH
Address Fritz-Thiedemann-Ring 20
25746 Heide
Germany
All Glass S.r.l
Telephone +49 481 78760830
Fax +49 481 78760839
Internet Address www.alfaref.de
Booth Hall 13 D35
PRODUCT OVERVIEW
Address Cesare Sarti, 20
43029 Traversetolo / PR
Italy
Telephone +39 0521 340810
Fax +39 0521 340805
Internet Address www.allglass.it
Booth Hall 13 B86
PRODUCT DETAILS
PRODUCT OVERVIEW
01.13.01 Feeding and stacking systems
Sekundärrohstoffe in verschiedenen Körnungsgrößen
01.13.02 Transport and handling systems
01.13.03 Conveying, sorting and storage facilities
01.13.04 Packing lines - boxes, shrinking, hoop-casing machinery
PRODUCT DETAILS
Chain Conveyor
1194
glasstec
glasstec
MyCatalog
MyCatalog
full Pallets Labeller
Roller conveyor
tray/hood Former
palletizzer for cases packs
AMBEG Dr. J. Dichter GmbH
Address Tempelhofer Weg 65-68
10829 Berlin
Germany
pallettizing robot
Telephone +49 30 7800950
Fax +49 30 7881214
Internet Address www.ambeg.de
Booth Hall 14 A05
1195
glasstec
glasstec
PRODUCT OVERVIEW
MyCatalog
MyCatalog
http://www.ambeg.de/rp16e.html
01.06.11 Ampoule and laboratory glass machines
Anglo Carbon
02.05.01 Laser-isolating technology
03.05.08 Other types of special glass
PRODUCT DETAILS
Syringe forming machine FS 16
Vertical 16/12-heads indexing motion machine for
the production of syringe barrels from glass tube
Address Waterloo Mills, Waterloo Road
LS28 8DQ Pudsey
United Kingdom
Telephone +44 113 2564664
Fax +44 113 2571119
Internet Address www.anglocarbon.com
Booth Hall 13 A92
PRODUCT OVERVIEW
01.06.01 Gob feeder
01.06.13 Moulds for glass production
http://www.ambeg.de/fs16e.html
Vial forming machine RP 16
Vertical 16/8-heads indexing motion machine
for the production of tubular glass vials
PRODUCT DETAILS
01.06.01 Gob feeder
Crucibles
Anglo Carbon manufactures a range of crucibles, primarily used in thin film
deposition processes, for both electronic and optical applications. Our
components have proved to be particularly successful when used for
precious metals and aluminium, where the strength, heat resistance and
low coefficient of thermal expansion, have lead to increased evaporation
rates and a longer service life than many graphite crucibles on the market.
1196
glasstec
glasstec
graphite moulds
We manufacture graphite moulds for diamond tooling and castings of
precious metal bars to customer specifications.
Antonini S.r.l.
Address Via Medaglie d'Oro della Resistenza
50057 Empoli (Fi)
Italy
Telephone +39 0571 93-221
Fax +39 0571 93-1828
Internet Address www.antoninisrl.com
Booth Hall 14 D76
PRODUCT OVERVIEW
PRODUCT DETAILS
Annealing lehrs
Input section
This section is created according to the loading system: by hand or
automatic.
For the manual system we install insulating doors lifted pneumatically or
electrically; these doors guarantee low-room temperatures for people
working around this area. For the automatic loading system we install an
insulating covering complete with door containing the input-roller, the
transfer plates, the cross-conveyor and the shovel of the pusher. Generally
this covering is fitted to the dimensions and the kind of the pusher.
Temperature controlled section
This section is divided into areas where the air temperature is controlled
through special systems. In each area there is a special air-recycling loop
maintained by one or more stainless steel turbines. By this process you
obtain: stability of the temperature guaranteed by the forced-air circulation,
uniformity of the temperature guaranteed by an efficient air distribution,
MyCatalog
MyCatalog
maximum performance of the thermal exchange air-object , maximum use
of the energy produced by the heating-systems. The elements into which
this section is divided are completely independent both for the
air-circulation and fir the heating and cooling systems. The elements that
make up this section are equipped either with heating systems, or with
heating and cooling systems or with cooling systems only. Each element is
made up of three parts: internal walls are in stainless steel or carbonioium
steel, between the internal walls and the external ones an insulation is
created by rock wool packed at a density of about 120 kg/m3; the external
frame is in steel and heating and cooling are located in the various areas
according to the system and the kind of lehr you need to arrange.
Harvesting table
Uncovered section and Belt-traction-group
We would like to highlight the simplicity of the arrangement and the easy
accessibility to the installed devices. The structure is prepared according to
the needs of the customer and to the kind of the unloading (by hand or
automatically), the presence of cold-treatments (either from above or from
underneath), the presence of belt-cleaning-systems and the kind of room
where the gathering is carried out.
Heating systems:Direct heating-system
Section of lehr with direct-heating system with gas-fed Antonini-built
burners. This system is used in almost all the annealing and decorating
lehrs because we obtain the best ratio "performance/consumption".
Depending on the gas pressure available in the plant, you can use burners
for low pressure, the classic type (with fan) or burners for medium pressure,
extremely simple
because of the absence of the fan.
Indirect heating-system
The heating means, radiant-tubes, placed into the zones of the lehr are
employed as thermal-exchangers. They are made by a U-shaped tube of
refractory steel and have the burner at one end, to feed them, and the
chimneys for the exhausting of the combustion-smokes at the other. For
this type of heating we can use any kind of gas and diesel oil.
Electric heating-system
The picture shows an electric triphase resistance-panel at high efficiency
and a section of the lehr where these panels are installed.
The resistive heating elements are with an exposed winding hare-thread for
optimal maximum thermal exchange.
Mixed heating-system
The picture shows a mixed heating system. The section on the right can
operate ina combined environment of gas-electricity
Cooling means
The cooling, in the controlled temperature area, is created by valves with
electric control and with hot-air extractors. In the uncovered part fan groups
with variable or fixed speed have been used.
1197
glasstec
glasstec
MyCatalog
MyCatalog
Cold processes
APB Antonio Piazza Brevetti S.r.l.
Decorating lehrs
Address Via Liguria, 19
38015 Schio (Vi)
Italy
Telephone +39 0445 57-6397
Fax +39 0445 57-9336
Internet Address www.apbsrl.it
Mould-preheating oven
Booth Hall 16 A57
PRODUCT OVERVIEW
PRODUCT DETAILS
Stackers e cross-converse
MTO
Storage unit with orthogonal traversing, available in various versions and
storage capacities between 1.000 and 35.000 Kg. for half and large sheets.
This range includes the following models:MTOH,MTOC ed MTO MAP:
MTOH
Tempering lehrs
MTOH 2000, 2000 Kg.,with manual and semi automatic traversing for half
sheets;
MTOH 3000, portata 3000 Kg.,with manual and semi automatic traversing
for half sheets;
MTOH 4000, portata 4000 Kg.,with manual and semi automatic traversing
for half sheets;
MTOH 6000, 6000 kg. with manual and semi automatic traversing for half
sheets;
1198
glasstec
glasstec
MTOH 6606, 6000 Kg., capacity, for large sheets, manual, semi automatic
and automatic traversing;
MTOH 9000, 9000 Kg., semiautomatic and automatic traversing
-MTOC
MTOC : Storage uni with orthogonal traversing, available in various
versions and storage capacities for half sheets
MTOC 1000, 1000 Kg., manual and semiautomatic traversing for half
sheets;
sheets;
sheets;
sheets;
-MTO MAP
MTO MAP: storage unit with orthogonal traversing, automatic traversing,
only, PLC controlled, for large sheets, 10.000 to 50.000 Kg. capacity.
MyCatalog
MyCatalog
Armatec Vierhaus GmbH
Address Richard-Stücklen-Str. 19
91710 Gunzenhausen
Germany
Telephone +49 9831 5002-0
Fax +49 9831 5002-20
Internet Address www.bystronic-glass.com
Booth Hall 14 E24
PRODUCT OVERVIEW
02.01.01.02 Cutting technology for laminated safety glass
02.09.02.01 Laminated glass technology with foil for architectural glass
03.04.05 Production equipment for solar technology
PRODUCT DETAILS
ORTAN 240/220
Ortan 240 is a patented machine.
Ortan 240 was designed, projected and realised in order to stock in it both
sheet product and packed and/or loose products.
Sheet products can be stocked in it are the following: sheets of glass,
aluminium, copper, special alloies, plexiglass, polycarbonate, PTFE and so
on.
Packed and/or loose products can be stocked by ORTAN 240 , model
MEC.
The main model, ORTAN 240, for the sheet product has the
frame-structure suitable to contain some product with the following
dimensions: lenght mm. 3.600 height mm. 2.400 thickness
150-190-220-270 mm, with a capacity until 2.000 Kg.
The overall lenght of the main model is mm. 4.000.
ORTAN 240, can be supplied, on request, with particular dimensions.
Automatic loading systems
http://www.bystronic-glass.com/global/com/en/products_architectural_glass/loading/index.php
Handling equipment
Rational handling equipment for all sectors of sheet and flat glass
processing
Bystronic glass' handling equipment characteristic features:
- careful handling of load
- ergonomics and safety
- minimized effort for the operator
- time saving and cost reduction in manufacturing process
- One-column lifts
1199
glasstec
glasstec
MyCatalog
MyCatalog
Low own weight, rigid guidance of the load by hoisting telescope,
COMPANY NEWS
up to 500 kg
The combination of translucence and protection makes glass a very popular material in
architecture. Whether it is for interior fittings or the façade, the transparent material has
multiple applications. In particular safety glass is used where personal security and
increased safety should be combined with an attractive design.
Rüdiger Göpferich, Managing Director of sitec.glas, identified this trend long ago and
started with the production of SSG as far back as 1999. Today, the company based in
Waghäusel, Baden in Germany, produces approx. 250,000 sqm glass per year. "There is
still a great demand for single-lite safety glass, however, in the past few years, LSG has
experienced a true renaissance", says the company's founder. For this reason, the
company decided approximately two years ago to extend its product portfolio. Today,
LSG makes up about one third of the production.
The latest plant on the market
The plant on which the company sitec produces LSG comes from the Bystronic glass
group. "Our good experience with the handling devices from the Armatec Technology
Centre made the decision in favour of the LSG plant easy for us", Rüdiger Göpferich
recalls, adding: "The favourable price/performance ratio and the certainty of having
purchased the latest machine on the market were additional convincing arguments."
Visitors can admire the production of laminated safety glass lites up to a size of 2.60 x
6.00 meters in sitec's light-flooded halls with a total production area of 7,200 square
meters. The blue painted plant first lamiline fits perfectly into the production hall, because
when the hall was constructed, Rüdiger Göpferich had this investment already in the
back of his mind.
What is special about the LSG line from Bystronic glass is the high productivity of the
plant: Starting from a highly-efficient provisional laminate, which very accurately places
the glass plates on top of each other at high even assembly pressure, the heating zones
with infrared radiators and convectors, up to 3,500 square meters of laminate safety
glass are produced in every shift. The company's founder is particularly pleased that he
could purchase all components from one supplier: "Bystronic glass not only installed the
LSG plant in the hall, but delivered and put into operation all components necessary for
LSG production, from the washing machine, the clean room with air conditioning, the reel
unwinders for 16 PVB films, the autoclave car, to the handling devices." Thomas Fuchs,
Director of Production, soon found out that operation of this high-tech plant is very easy.
"Using the Laminoptic software, I am always in control of the production. Different orders
are administered and operating data are recorded via a user-friendly PC interface", he
reports.
Good experiences good partnership
But it was not just the technology that convinced Rüdiger Göpferich. "We have now
worked with the LSG plant for about one and a half years, and we are still very satisfied.
Already during our first meetings, I was impressed with the good advice that was offered.
Over time, it came into notice that the exceptional service was also an argument for
Bystronic glass", he states and explains that, for him, what matters most is
professionalism, speed and a pleasant unobtrusiveness on the part of the service
personnel. All in all, Rüdiger Göpferich is satisfied when he looks at his investment and
- Two-column lifts
Equipment for large, heavy glass plates, rigid guidance of the load
by hoisting telescope, up to 1.000 kg
- Manipulators
Flexible use in different hoisting gears, up to 5.000 kg
- Suction frames
Basic equipment for vertical transport, up to 2.500 kg
- Accumulator-driven suction
Autarkical equipment for mobile use, up to 600 kg
- Crane systems
X-Y- craneways and slewing cranes in lightweight construction
- Special applications
for curved glass lites, extremely large glass formats, loading
from CNC centers or screen printing machines
http://www.bystronic-glass.com/global/com/en/products_architectural_glass/handling_systems/index.php
1200
glasstec
glasstec
MyCatalog
is convinced that cheaper Asian glass will not be competition for his company over the
medium term. "I am convinced that our high product quality and flexibility are the
decisive factors for retaining customers." Sitec-glas will therefore continue strengthening
its competence in individual and fast production and manufacture high-quality products
with love for detail.
Bystronic glass media contact
Iris Minten
PR / Online Communication
c/o Lenhardt Maschinenbau GmbH
Karl-Lenhardt-Str. 1-9
D-75242 Neuhausen-Hamberg
Phone +49 (0)7234 601 120
Fax +49 (0)7234 601 114
[email protected]
MyCatalog
Password:
Forgot your password?
Create user account
Apply for Press Login
Service linksback to topPrivacy PolicyTerms of UsePrint pageRecommend this page ©
Messe Düsseldorf
More informations and functions
Search Suchwort eingeben:
function openlogin( id ) { var ele = xGetElementById( id ); if ( ele ) { if (ele.style.display ==
"block") { xDisplay( ele, "none" ); } else { xDisplay( ele, "block" ); } } else { alert('nix
gefunden') } return; } function show_password(text, pwd) { var ele1 = xGetElementById(
text ); var ele2 = xGetElementById( pwd ); if ( ele1 && ele2 ) { xDisplay( ele1, "none" );
xDisplay( ele2, "inline" ); ele2.focus(); } else { alert('nix gefunden') } return; } function
submit_login( show_only_one_box ) { var ele = xGetElementById( "oos_username" ); if
(ele.value == "Ident No.") { ele.value=''; } var ele = xGetElementById( "order_no" ); if
(ele.value == "Stand Order No.") { ele.value=''; } var ele = xGetElementById( "username"
); if (ele.value == "Login Code" || ele.value == "" || ele.value == "") { ele.value=''; } /*
Setze die jeweils anderen Loginfelder leer */ if ( show_only_one_box== 'usr' ) { var ele =
xGetElementById( "oos_username" ); ele.value=''; var ele = xGetElementById(
"order_no" ); ele.value=''; var ele = xGetElementById( "passwd1" ); ele.value=''; } else if (
show_only_one_box=='exh' ) { var ele = xGetElementById( "username" ); ele.value='';
var ele = xGetElementById( "passwd" ); ele.value=''; } var ele = xGetElementById(
"loginbox" ); ele.submit(); } Login
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Questions concerning your password or OOS?
Phone:+49/211 4560-400
Email:Online-Support
for Visitors & Press
Login Code:
1201
glasstec
glasstec
MyCatalog
Die Kombination von Lichtdurchlässigkeit und Schutz machen Glas zu einem in der
Architektur beliebten Baustoff. Ob Innenausbau oder Fassade, die Verwendung des
transparenten Materials ist vielfältig. Insbesondere wo Personenschutz und erhöhte
Sicherheit kombiniert mit ansprechendem Design gewünscht sind, findet Sicherheitsglas
seinen Einsatz.
Diesen Trend hat Rüdiger Göpferich, Geschäftsführer von sitec.glas früh erkannt und
begann bereits 1999 mit der Produktion von ESG. Heute verarbeitet das Unternehmen
im badischen Waghäusel rund 250.000 Quadratmeter Glas pro Jahr.
Einscheibensicherheitsglas ist zwar nach wie vor gefragt, doch in den letzten Jahren
erlebt VSG eine wahre Renaissance , sagt der Firmengründer. Daher hat sich das
Unternehmen vor knapp zwei Jahren entschlossen, sein Produktportfolio zu erweitern.
Heute beträgt der Anteil an VSG gut ein Drittel der Produktion.
Die modernste Anlage im Markt
Die Anlage, auf der die Firma sitec VSG produziert, stammt von der Bystronic glass
Gruppe. Gute Erfahrungen mit Handlinggeräten aus dem Technologiezentrum Armatec
haben uns die Entscheidung für die VSG-Anlage leicht gemacht , erinnert sich Rüdiger
Göpferich und ergänzt: Das gute Preis-Leistungs-Verhältnis und die Gewissheit, die
modernste Maschine im Markt zu erwerben, haben uns außerdem überzeugt. So
können Besucher in sitecs lichtdurchfluteten Hallen mit einer Gesamtproduktionsfläche
von 7.200 Quadratmetern die Produktion von Verbundssicherheitsglas-Scheiben bis zu
einer Größe von 2,60 x 6,00 Metern bewundern. Die blau lackierte Anlage first lamiline
passt perfekt in die Produktionshalle, denn beim Hallenneubau hatte Rüdiger Göpferich
diese Investition bereits im Hinterkopf.
Das Besondere an der VSG-Linie von Bystronic glass ist die hohe Produktivität der
Anlage: Ausgehend vom hocheffizienten Vorverbund, der die Glasplatten mit hohem,
gleichmäßigem Pressdruck und äußerst exakt aufeinander bringt, den Heizzonen mit
Infrarotstrahlern und Konvektoren entstehen pro Schicht bis zu 3.500 Quadratmeter
Verbundsicherheitsglas. Der Firmengründer schätzt insbesondere, dass er alle
Komponenten aus einer Hand erwerben konnte: Bystronic glass hat uns nicht nur den
VSG-Verbund in die Halle gestellt, sondern von der Waschmaschine über den Reinraum
mit Klimaanlage, die Rollenabwicklung für 16 PVB-Folien, den Autoklavwagen und die
Handlinggeräte alle zur VSG-Produktion benötigten Bestandteile geliefert und in Betrieb
genommen. Und dass die Bedienung dieser hochtechnologischen Anlage dennoch sehr
einfach ist, konnte Produktionsleiter Thomas Fuchs schnell feststellen. Mit Hilfe der
Software Laminoptic habe ich die Produktion stets im Überblick. Die Verwaltung der
verschiedenen Aufträge und die Erfassung der Betriebsdaten erfolgt über eine
nutzerfreundliche PC-Oberfläche , berichtet er.
Gute Erfahrungen partnerschaftliches Verhältnis
Doch nicht nur die Technik konnte Rüdiger Göpferich überzeugen. Mittlerweile arbeiten
wir seit gut eineinhalb Jahren mit der VSG-Anlage und sind nach wie vor zufrieden.
Bereits während der ersten Gespräche hat mich die gute Beratung angesprochen. Im
Laufe der Zeit zeigte sich dann, dass auch der außergewöhnliche Service ein Argument
für Bystronic glass ist , berichtet er und erklärt, dass für ihn in erster Linie
Professionalität, Schnelligkeit und eine angenehme Zurückhaltung der Servicekräfte
zählen. Alles in allem blickt Rüdiger Göpferich zufrieden auf seine Investition und ist sich
MyCatalog
sicher, dass günstigeres, asiatisches Glas für seine Firma mittelfristig keine Konkurrenz
darstellt. Ich bin davon überzeugt, dass unsere hohe Produktqualität und Flexibilität die
entscheidenden Faktoren in der Kundenbindung sind. Daher wird sitec-glas seine
Kompetenz in individueller und schneller Produktion auch weiterhin stärken und
hochwertige Produkte mit Liebe zum Detail fertigen.
Bystronic glass Pressekontakt
Iris Minten
Phone +49 (0)7234 601 120
Fax +49 (0)7234 601 114
[email protected]
Service Linksnach obenDatenschutzNutzungsbedingungenSeite druckenSeite
empfehlen © Messe Düsseldorf
Mehr Informationen
Suche Suchwort eingeben:
(ele.value == "Ident-Nr.") { ele.value=''; } var ele = xGetElementById( "order_no" ); if
(ele.value == "Standauftrags-Nr.") { ele.value=''; } var ele = xGetElementById(
"username" ); if (ele.value == "Login" || ele.value == "" || ele.value == "") { ele.value=''; } /*
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Fragen zum Passwort und zum OOS?
Tel.:+49/211 4560-400
für Besucher & Presse
Login:
1202
glasstec
glasstec
Passwort:
Passwort vergessen?
Benutzerkonto einrichten
Pressezugang beantragen
MyCatalog
MyCatalog
Höher, größer, weiter. Nicht nur die Olympischen Spiele machen Peking in diesem Jahr
zur Metropole der Superlative. Bereits im Vorfeld des sportlichen Großereignisses hat
die Stadt durch zahlreiche rekordverdächtige Bauvorhaben auf sich aufmerksam
gemacht. Weltbekannte Architekten haben Peking vielerorts ein neues Gesicht gegeben
und überall großzügig im Einsatz: der Allzweck-Werkstoff Glas in seiner edelsten
Form, verarbeitet mit Anlagen der Bystronic glass Gruppe.
Die beiden L-förmigen Türme strecken sich fast 240 Meter schräg in den Himmel. In
schwindelnder Höhe werden sie dann von einem 70 Meter hohen Verbindungselement
vereint. Auch beim zweiten Hinsehen wirkt das neue Wahrzeichen Pekings noch immer
irgendwie in sich verdreht und unwirklich mehr wie eine optische Täuschung als ein
reales Gebäude. Für viele Einwohner Pekings gilt der CCTV Tower deshalb schon jetzt
als architektonisches Wunder.
Entworfen hat den neuen Hauptsitz des chinesischen staatlichen Fernsehens das
deutsch-niederländische Architektenduo Ole Scheeren und Rem Kohlhaas. Mit 475.000
Quadratmetern Nutzfläche ist der CCTV Tower das zweitgrößte Gebäude der Welt.
Flächenmäßig wird er nur noch vom Pentagon übertroffen. Derzeit befindet sich der
Gebäude-Gigant noch im Bau, aber nach seiner Fertigstellung wird der Tower Platz für
250 TV-Sender mit mehr als zehntausend Mitarbeitern bieten.
Der CCTV Tower ein Meisterwerk der Statik
Unser Beitrag steckt in der Fassade erzählt Gu Xin, Mitglied der Geschäftsleitung bei
Tianjin CSG, einem der größten chinesischen Glasverarbeiter. Das Hauptgeschäft von
Tianjin CSG liegt vor allem in der Produktion von qualitativ hochwertigem Isolierglas, wie
es auch hier im CCTV Tower verbaut worden ist. Gu Xing: In Fall des CCTV Towers
handelt es sich um zweifach laminierte Isolierglasscheiben. Die Herstellung dieser
Scheiben ist sehr anspruchsvoll und nur mit sehr viel Erfahrung und ausgezeichneten
Produktionsanlagen möglich.
Um Produkte dieser Art fertigen zu können, setzt Tianjin CSG seit vielen Jahren auf die
Maschinentechnologie von Bystronic glass. Gu Xing nennt mehrere Gründe für diese
Entscheidung: Nachdem wir die erste Linie von Bystronic glass gekauft hatten, hat uns
die Qualität der Maschinen sehr schnell überzeugt. Wir können nun genau die
Qualitätsprodukte fertigen, die unsere Kunden benötigen. Aus diesem Grund werden wir
auch in Zukunft auf die Technologie von Bystronic glass setzen.
Weltgrößtes Terminal-Gebäude
Der CCTV Tower ist aber nicht das einzige Gebäude in Peking, das es inzwischen zu
internationaler Bekanntheit gebracht hat. Auch der im März fertig gestellte
Flughafenterminal 3 sucht weltweit seines Gleichen. Mit einer Gesamtlänge von 3,25 km
und einer Fläche von 170 Fußballfeldern kann die gigantische Stahl-Glas-Konstruktion
konkurrenzlos den Titel Weltgrößtes Terminalgebäude für sich in Anspruch nehmen.
Trotz der riesigen Ausmaße beeindruckt Terminal 3 durch seine filigrane Architektur und
Farbgebung. Die tiefroten Säulen und das mattgoldene Dach sollen an die kaiserlichen
Paläste und Tempel in Peking erinnern.
Verantwortlich für diese gelungene Verbindung zwischen Altertum und Moderne ist unter
anderem der Glasverarbeiter Wuhuatianbao. Das Unternehmen, dessen Produktportfolio
zu 80 Prozent aus Low-E-Glas besteht, hat zahlreiche Glaselemente für den neuen
Terminal 3 geliefert, berichtet Yang Honh Bing, Präsident bei Wuhuatianbao Die
1203
glasstec
glasstec
MyCatalog
Olympischen Spiele sind ein sehr wichtiges Aushängeschild für unser Land. Deshalb
sind wir natürlich stolz, an diesem Projekt beteiligt gewesen zu sein. Wie schon CSG
setzt auch Wuhuatianbao bei der Produktion von Qualitätsgläsern auf Technologie aus
dem Hause Bystronic glass. Yang Honh Bing erklärt: Die Produktionslinien von
Bystronic glass liefern auch auf Dauer gesehen eine stabile und ausgezeichnete
Qualität. Gerade diese Verlässlichkeit ist in unserem Geschäft außerordentlich wichtig.
Der Erfolg gibt Yang Honh Bing recht: Neben Terminal 3 waren die Gläser von
Wuhuantinbao auch bei der Realisierung weiterer olympischer Projekten sehr gefragt
und finden sich beispielsweise in der neuen Schwimmarena oder dem Olympischen
Dorf.
Platz für 91.000 Zuschauer
Einem weiteren architektonischen Glanzlicht Pekings haben die Chinesen inzwischen
den Spitznamen Das Nest gegeben. Gemeint ist damit das neue Beijing National
Stadium, das Platz für 91.000 Zuschauer bietet. Und tatsächlich erinnert das Gebäude
mit seinen zahlreichen Verstrebungen an ein überdimensionales Vogelnest. Die Idee zu
diesem außergewöhnlichen Bau stammt von den Schweizer Architekten Herzog &
DeMeuro, die bereits beim Bau der Allianz-Arena in München ihren Hang zum
Außergewöhnlichen unter Beweis gestellt haben. Auch an diesem Projekt war mit
Xinfuxin wieder ein Kunde von Bystronic glass beteiligt. Chen Quan Fu, Vorsitzender bei
Xinfuxin, erklärt: Das Glas, das wir für das Beijing National Stadium geliefert haben, ist
vorwiegend auf Anlagen von Bystronic glass verarbeitet worden. Wir sind sehr zufrieden
mit diesen Produktionslinien, da sie unserem Anspruch gerecht werden, die besten
Isolierglasprodukte liefern zu können. Darüber hinaus schätze ich vor allem den fast
schon freundschaftlichen Umgang miteinander, wenn es um Verhandlungen über neue
Maschinen geht.
Auch nach den Olympischen Spielen werden Gebäude wie der CCTV Tower, Terminal 3
oder das Beijing National Stadium mit Sicherheit viele staunende Blicke auf sich ziehen,
stellen sie doch eindrucksvoll unter Beweis, welche fast unbegrenzten architektonische
Möglichkeiten inzwischen beim Einsatz des Werkstoffes Glas bestehen.
Iris Minten
Phone +49 (0)7234 601 120
Fax +49 (0)7234 601 114
[email protected]
MyCatalog
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
Batisti Meccanica S.r.l.
Address Via Pratignone, 12
50053 Empoli
Italy
Telephone +39 0571 921127
Fax +39 0571 924950
Mehr Informationen
Internet Address www.batisti.it
Booth Hall 14 A27
1204
glasstec
glasstec
PRODUCT OVERVIEW
PRODUCT DETAILS
Lathe Type T1 VV
This machine is for small cuttings on glass and crystal items. The motor CC
HP 2 from 0 to 6000 Rpm by a simple rotation of a knob.
The mandrel speed is read with a digital electronic revs counter.
A case with pump for cooling liquid is available upon request.
This lathe is equipped with 5 mandrels, two of which have conical threads
for stone wheels.
Installed power: 2 HP
Water (per minute): 3 Lt.
Approx. weight: Kgs. 160
Height: mm. 1600
Depth: mm. 1000
Width: mm. 800
http://www.batisti.it/cornice.htm
BDF INDUSTRIES S.p.A.
MyCatalog
MyCatalog
PRODUCT DETAILS
BDF Feeder
1. Mechanisms designed for speed up to 170 cuts/min.
2. Possible applications from 0° to 30° RH and 0° to 90° LH.
3. 360° differential gear on the plunger cam.
4. Shears mechanism with air-spring to improve the cutting motion at high
speed.
5. Shears arm in lightweight aluminium alloy against corrosion.
6. Shears cooling spray system from bottom or from top.
7. Plunger assist with air-spring to improve plunger up and down motion at
high speed.
8. Roller linear guide on the shears linkage for a better motion control at
high speed.
9. Lincoln lubrication on all guide and control systems.
10. Lubrication in oil for the shears mechanism and plunger cam
differential.
11. Shears cams with reduced stroke for high cutting speed.
12. Bevel gear pair type revolving tube mechanism for a better control of
tube revolving speed.
13. Fan air cooling in the revolving tube ball bearing.
Address Via Dell'Industria, 40
36100 Vicenza
Italy
Telephone +39 0444 286100
Fax +39 0444 286299
Internet Address www.bdf.it
Booth Hall 14 C69
PRODUCT OVERVIEW
01.06.01 Gob feeder
14. Manual or motor-driven revolving tube height adjustment system ( 130
mm ).
15. Revolving tube speed adjustment with brushless motor controlled by
the machine computer.
High Tech 2000 I.S. Maschine BDF - D.G. 6 1/4"
BDF, a leading company in the glass industry, now presents its latest I.S.
machine model D.G. 6 1/4" to open new prospects in the production of
hollow glass.
Innovation, technology, and versatility make this machine the ideal solution
for high productivity, improved work surroundings, and considerable energy
savings.
The long experience acquired in the design and construction of I.S.
machines permits BDF to create the D.G. 6 1/4" in different section number:
versions with 6, 8, 10, and 12 sections and 6+6, 8+8 sections (tandem).
Blow moulds of a maximum 6 5/8" diameter can be mounted on the I.S.
1205
glasstec
glasstec
MyCatalog
D.G. 6 1/4" machine.
The machine can also be converted into a triple gob model 4 1/4".
Beijing Ruitai High-temperature Materials & Technology Co.,
Ltd.
Address 4F, Main Building, China Building
Materials Academy, Guanzhuang,
Chaoyang
100024 Beijing
China (Rep.)
Telephone +86 10 51167508
MyCatalog
Beijing Trend Hi-Tech Insulating Materials Co., Ltd.
Address Matou, Huoxian Town, Tongzhou
District
101 109 Beijing
China (Rep.)
Telephone +86 10 80586925
Fax +86 10 80581853
Internet Address www.bjtrend.com
Booth Hall 10 E30-3
Fax +86 10 65013724
Internet Address www.bjruitai.com
Booth Hall 10 G16-1
PRODUCT OVERVIEW
PRODUCT DETAILS
AZS Ramming Materials
Product Name
AZS ramming materials
Ruitai Brand
RT-ZR
Main Application Paver Substrate
PRODUCT OVERVIEW
PRODUCT DETAILS
TDM23HS TDM26HS
The TDM23HS TDM26HS series of IFB are classified by temperature and
applications. Each type is formulated to meet specific thermal and physical
requirements and after firing is machined to precise tolerances on all
surfaces.
TDM IFB are made from high purify refractory clays and other ceramic raw
materials, these insulating firebricks contain a carefully graded organic filler
which is burned out during manufacturing to give a uniform controlled pore
structure.
Features
Low thermal conductivity
Gives good thermal insulation, enabling the use of thin-walled
constructions.
Low Heat Storage
Lower heat storage versus dense brick means reduced fuel costs in
cycli-cally operated heating equipment.
High Insulating Value
The light weight and high insulating value of TREND IFB make possible
thinner furnace walls, improved efficiency and lower operating costs.
High Purity
The very low iron and alkali flux content confers good refractoriness and
1206
glasstec
glasstec
MyCatalog
the high alumina content contributes to their stability in reducing
atmosphere.
Accurate Dimensions
Because TREND Insulating Fire Brick are machined to precise dimensions
courses can be laid quickly and easily. The result is a stronger
refractory lining resulting in less heat loss through the joints.
Bekintex N.V.
Address Neerhonderd 16 IP Kwatrecht
9230 Wetteren
Belgium
Telephone +32 9 3657111
Fax +32 9 3657117
Internet Address www.bekaert.com/bekintex
MyCatalog
PRODUCT DETAILS
Heat-resistant separation material
BEKITHERM® knitted, woven, braided and needle-punched products are
used in various applications :
glass bendingcovering material for glass handling toolsas replacement for
asbestos and man-made mineral fibresroller coverings for the glass and
aluminium industryhigh-temperature seals
BEKITHERM® products are used in production processes where resistance
to both high temperatures and mechanical loads is required.
In the production of complex glass forms and stainless steel cooking pans,
BEKITHERM® fabrics are used as separation cloth between the glass or
metal and the mould. It provides a cushion and prevents optic defects.
Advantages : it is a combination of :
heat-resistance (700 °C and more)softnessflexibilitydurabilityenvironmental
friendlynesseasy to affix (can be welded, sewed,...)easy to shape
Booth Hall 12 C21
PRODUCT OVERVIEW
02.04 Forming and bending technology
02.11.08.05 Chemical protection material for glass
Beneq
Address Ensimmäinen Savu
01510 Vantaa
Finland
Telephone +358 9 759953-0
Fax +358 9 759953-10
Internet Address www.beneq.com
Booth Hall 12 A43
03.03 Automotive glass
04.01.01 Mechanical tools
PRODUCT OVERVIEW
01.11.01 UV-Absorption-Coating (pyrolytic)
04.03 Handling tools, hand-guided
01.11.02 IR-Reflective Coating (pyrolytic)
01.12.01 Hot end coating
02.06.06 UV-Absorption - Coating (pyrolytic)
1207
glasstec
glasstec
02.14 Nanotechnology
03.10.03.01.06.02 Coating of automotive glass
03.10.03.01.06.03 Coating of flat glas
PRODUCT DETAILS
Colouring of glass
nHALOTM is used to colour soda-lime-silica glass. During the colouring
process, the hot glass substrate is coated with colorants of a certain
chemical composition. The colorants, which nHALOTM produces as
nanosize particles, readily migrate into the glass matrix and leave the
surface intact. The colour depth and intensity is controlled by altering
nHALOTM parameters. The colour is not a surface coating, but a chemically
and thermally stable surface zone modification. The colour cannot be
removed mechanically.
http://www.beneq.com/colour.php
Production of solar control surfaces on glass
nHALOTM is used to add solar control properties to soda-lime-silica-glass.
In the process, glass substrates at elevated temperatures are coated with
nanosized particles. These particles migrate into the glass matrix and build
or modify the existing vitreous network. The altered network and its additive
building blocks change the transmission spectrum of the glass. The
property cannot be physically removed from the surface, as it is embedded
in the glass matrix.
MyCatalog
MyCatalog
COMPANY NEWS
20.10. 2008
Beneq announces collaboration with AGC Flat Glass Europe
Beneq Oy (FI) strengthens its position as supplier to the glass industry by Introducing
Real Nanotechnology to the Glass Industry and announcing the on-going joint
development project and collaboration with AGC Flat Glass Europe (BE) for Beneq s
nanotechnology-based glass coating technology, nHALO®.
Beneq s unique coating technology and equipment combined with AGC Flat Glass
Europe s extensive experience in the field of glass production and manufacturing
technology and knowhow concerning the use of the glass products enables extensive
development and commercialization of nHALO-technology. The commercialization of
nHALO will cover a wide range of coating applications and these applications will
gradually enter into flat glass markets.
Collaboration with AGC Flat Glass Europe, a European leader in flat glass is a
significant step further for Beneq to introduce nanotechnology solutions to flat glass.
AGC Flat Glass Europe s resources and know-how gives Beneq valuable information
about industry needs and helps us speed up the commercialization of nHALO technology
and equipment , says Mr. Sampo Ahonen, CEO of Beneq.
Beneq s proprietary nHALO-technology and applications are designed for producing
functional surfaces on glass enabling synthesis, deposition and diffusion of nanoparticles
in and/or on the surface of glass. In the nAERO-process, submicron droplets are directly
deposited on hot glass and form a uniform film and the process can be adapted to the
transport speeds of glass production and post-processing lines. The main applications
for nAERO are low-emissivity and TCO-coatings on glass. Beneq ALD Thin Film
Systems are designed for depositing oxides, nitrides and sulfides on metals, polymers
and biocompatible materials. ALD applications are applied to optical, tribological,
passivation and primer layer high precision thin films for flat and complex 3D-products.
For additional information please contact:
Mr Sampo Ahonen, CEO, Beneq Oy
M: + 358 40 520 1090, [email protected] , www.beneq.com
Messe Düsseldorf
1208
glasstec
glasstec
MyCatalog
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
MyCatalog
02.03.01.01 Grinding techniques for straight edges
02.03.01.03 Grinding techniques for formed glass
02.09.02.02 Laminated glass technology with foil for automotive glass
02.10.01 Washing machines and equipment
PRODUCT DETAILS
01.10.04 Paper applying machines
Maschinenbaustahlrohre
AD x ID 32 x 25-250 x 150 mm
BERNARD ET BONNEFOND
Address 7, allee Mathieu Murgue
42100 Saint Etienne
France
Benteler Maschinenbau GmbH
Telephone +33 4 77953000
Fax +33 4 77957806
Address Frachtstr. 10
33602 Bielefeld
Germany
Telephone +49 521 542-0
Internet Address www.bernardbonnefond.com
Booth Hall 13 E65
Fax +49 521 542-229
Internet Address www.benteler.de/maschinenbau
Booth Hall 15 H14
PRODUCT OVERVIEW
01.04.03 Smelting technology for tank furnaces
PRODUCT OVERVIEW
PRODUCT DETAILS
02.01.01.01 Cutting technology for float glass
02.02 Drilling technology
Varivolt
On load stepless variable voltage transformer.
Technical performances:
1209
glasstec
glasstec
LV or HV primary voltage.Galvanic insulation between primary and
secondary windings.Linear, on load voltage variation.No DC
component.Friendly simplified interface with supervisory systems.100 %
custom made equipment.
Bock Energietechnik
Address Gösen 15
92685 Floß
Germany
Telephone +49 9603 1295
MyCatalog
30
MyCatalog
300 kg pro Tag
Erfahrung und Technologie aus den Großanlagenbereich, übersetzt auf
kleinere Anlagen, ist das Konzept für eine Vielzahl von elektrischen
Glasschmelzöfen.
Diese Öfen zeichnen sich aus durch:
Gute Glasqualität
Flexible Produktionsmöglichkeiten
Geringer Energieverbrauch
Hohe Betriebssicherheit
Angenehme Arbeitsbedingungen (keine Lärmbelästigung)
Einfache Bedienung
Umweltfreundliche Betriebsweise (kein Kamin)
Fax +49 9603 2995
Internet Address www.bock-energietec.de
Bohemia Machine, s.r.o.
Booth Hall 13 A41
PRODUCT OVERVIEW
Address Zamecla 1177
582 91 Svetla nad Sazavou
Czech Republic
Telephone +42 569 453-149
Fax +42 569 456-265
Internet Address www.bohemia-machine.cz
01.08.03 Textile glass fibre technology
01.09.04 Decorating lehrs
Booth Hall 13 F17
PRODUCT OVERVIEW
05.01.01.01 Measurement and control of glass position detection
05.01.05 Control and automation technology
05.03.01 MRP/CAD/CIM systems
05.03.04 Process control systems
PRODUCT DETAILS
Glasschmelzöfen für spezielle Glasherstellung
Leistungsbereich
01.03.02 Drying technology
01.03.06 Cullet preparation
02.03.02.01 Decorative grinding technology for hollow glass
02.03.02.02 Surface grinding for moulded glass
PRODUCT DETAILS
GLASSMAKER'S FIXTURE BM BOY 05 - "tramping device"
1210
glasstec
glasstec
This fixture is designed for handling a traditional glassmaker's mould in the
manual production of blown glass. Its main task is to close and open the
mould according to glassmaker's wishes, and rinse and cool it after the
glass article has been blown. Using this fixture in manual production of
blown glass results in substantial reduction of labour. Last but not least,
there is a substantial reduction in consumption of water because the BM
BOY is equipped with a closed cooling circuit. The main difference of this
fixture, compared to other similar products, consists in a profound
simplification of the mould mounting. This also results in much shorter time
necessary for the mould exchange.
MyCatalog
MyCatalog
Bonaiti Pietro s.n.c.
Address Via Pergola, 5
23900 Lecco
Italy
Telephone +39 0341 362357
Fax +39 0341 285546
Internet Address
MIXER 150l
The batch mixer BM-S-150 is designed for dry mixing of glass batch.
Maximum quantity of each batch is 150kg. The mixing process consists in
blending the batch inside the cylindrical drum that steadily rotates along its
main axis. Lower part of the drum can be separated and moved on a simple
truck to transport the batch from the mixing machine to the glass furnace.
The mixing process runs automatically and the degree of blending can be
adjusted by the mixing time. This mixing machine is convenient in
combination with pot furnaces.
CRACKING OFF MACHINE P-22
The two - station column cracking-off machine is suitable for cracking off
glass articles up to 500 mm (20") high with a diameter of up to 250 mm
(10"). The structure of the vertical guide with two horizontal arms equipped
with burners is highly rigid and enables an easy and accurate adjustment of
the burners. The shaft is equipped with a spring clutch that makes it easier
to fix the glass article on the rotating table. Thanks to this clutch, the
rotation of the table can be stopped by hand.
Booth Hall 14 B64
PRODUCT OVERVIEW
PRODUCT DETAILS
Bucket Wire Link Belts
with welded edges, flat and round wire spirals, woven alternately left and
right, undulated cross members, available mounted on chain with 1" and 50
mm
- pitch of spirals 5 mm
- distance between centers of cross members 14 mm
- diameter of cross members 1.5 mm
- diameter of spiral wire 1.2 mm
APPLICATION:
Food industry, small metal parts industry.
1211
glasstec
glasstec
MyCatalog
Bosch Rexroth AG, Vertrieb Deutschland
Address Zur Dessel 14
31028 Gronau
Germany
Telephone +49 5182-587-0
947-5000
Fax +49 5182-587-30
Internet Address www.boschrexroth.de
MyCatalog
zusätzlich eine vergrößerte Gleitfläche.
Bei Transportzahnketten von Rexroth werden die Lagerzapfen in den
Außenlaschen laserverschweißt. Die Transportzahnketten können direkt an
den Führungsleisten geführt werden, weil der Überstand der Nietköpfe
entfällt.
Attribute
- Laufruhe und Geräuscharmut
- gleitreibungsarmes Wiegegelenk
- Antriebszahnketten mit Geschwindigkeiten über 50 m/s
- kleine Abmessungen, hoher Wirkungsgrad
- hohe Verschleißfestigkeit ermöglicht hohe Lebensdauer
Booth Hall 14 A20
- Funktionssicherheit und Zuverlässigkeit
- Temperaturbeständigkeit bis 450°C
PRODUCT OVERVIEW
01.13.09 Parts for conveying, transport, packing and warehouse technology
03.04.06 Accessories
PRODUCT DETAILS
Zahnketten für Antrieb und Transport
Zahnketten zeichnen sich im Vergleich zu anderen Antriebslösungen durch
ihren harmonischen, sanften und präzisen Lauf aus. Grund dafür ist der
geringe Einlaufstoß und der gleichmäßige Verschleiß. Durch die
formschlüssige Kraftübertragung ist Schlupffreiheit gegeben und keine
Vorspannung notwendig. Der Einsatz der Zahnkette, ist auch bei sehr
hohen Temperaturen möglich.
Durch das spezielle 2-teilige Wiegegelenk stellt die
Rexroth-Transportzahnkette eines der verschleißärmsten
Transportsysteme überhaupt dar. Die optimierte Laschenform ermöglicht
- Zahnketten aus Edelstahl (1.4301)
- Sonderlaschen zur Realisierung komplexer Transportprobleme
Inverted-tooth chains for driving and conveying
Inverted-tooth chains are used in a wide range of applications.
This results from a multitude of standard components that can be
individually configured to create a customer-specific system solution.
That is why there is almost no industry where inverted-tooth chains do not
prove their cost-effectiveness on a daily basis.
Silence, functional reability, and a long service ife are some of the attributes
of inverted-tooth chain drives.
Besides the tooth form and special link construction on the chains,
sprockets also make a considerable contribution to the system s excellent
running properties and are tailored to the needs of the customer.
Modern-day machinery production requires drives to offer a high degree of
cost-effectiveness, precision and reliability.
Small dimensions, high efficiency, and easy assembly are additional
requirements that have to be met.
Rexroth s inverted-tooth chain drives meet all of these requirements.
This is made possible by a unique 2-part rolling pivot joint and the special
meshing of the inverted-tooth chain and sprocket. This special design is
incluedd in all of the pitches and models that are currently available.
1212
glasstec
glasstec
Inverted-tooth chains are used for classic circuit operation. Due to their
technical advantages, they are also the perfect solution for drives with
shafts that run in counterrotation or for reversing-operation drives.
Inverted-tooth chains are also used as couplings. In this case, they fall in
the category of flexible shaft couplings.
The wide variety of application options is extended by the use of
high-quality material that lets the chain withstand temperatures up to 450°
C, as well as by stainless steel versions.
Inverted-tooth chains for conveying and linkage systems provide optimum
conveyor-belt systems.
They offer the best option for conveying your workpieces. Feeder and
storage systems are also important components within automated
production lines. Individual adjustment of workpiece pallets, protecting
workpieces from vibration, and gentle conveying, even during accumulation
operation, are just a part of the overall requirements that a conveying
system must conform to.
MyCatalog
MyCatalog
PRODUCT DETAILS
01.06.01 Gob feeder
HIGH SPEED FEEDER
The Feeders are designed to deliver a continuous series of uniformly sized
and shaped gobs of molten glass to forming machine for production of
containers and other types of glassware.
Inverted-tooth conveyor chains from Rexroth work slip-free and carry every
part to the right station at the prescribed time. The workpieces rest either
directly on the chains, on pallets, or on carrier driver that have been
specially integrated into the chain, depending on the type and shape of the
workpiece.
Bottero
EGD400/450 Electronic Gob Distributor
DESCRIPTION
Address Via Genova, 82
12010 Cuneo
Italy
Telephone +39 0171 310611
Fax +39 0171 310757
Internet Address www.bottero.com
Booth Hall 14 E44
EGD400/450 is a high performance electronic gob distributor system for
I.S. forming machines. The EGD400/450 system is available in
stand-alone or COMBI version with the FMC400/450 Drive system or EPS
120 Pusher System. In the COMBI version two systems will be housed in
the same cabinet. The use of a high-power brushlessmotor together with a
sophisticated electronic control system makes it particularly suitable for this
application which requires high speed, precision and flexibility.
Electronic Forming Control
PRODUCT OVERVIEW
01.06.01 Gob feeder
1213
glasstec
glasstec
The EFC is the electronic system that controls mechanism movements of
the I.S. forming machine.
The operator can communicate with the system in two different ways:
by means of a graphic interface (supervisor program) orby means of a local
hand-held terminal (Hand Held Terminal - HHT).
MyCatalog
MyCatalog
PRODUCT DETAILS
Glastransportgestelle
Tekimex Transportstative können an alle Lieferwagen montiert werden, an
kleine wie große, an Wagen mit oder ohne Pritsche. Sie eignen sich
besonders zum bruchsicheren Transport von Glas, können aber auch für
alle Arten von Platten verwendet werden. Es gibt Stative oder auch
Extra-Zubehör speziell zum Transport von Fenster und Türen und vieles
andere. Lesen Sie mehr über Transportstative.
Busellato Glass Moulds S.r.l.
Address Via E. Mattei, 13
30020 Summaga di Portogruaro / VE
Italy
BSH Fahrzeugkomponenten
Telephone +39 0421 276987
Fax +39 0421 276100
Address Hermann-Hollerith-Str. 5
52499 Baesweiler
Germany
Telephone +49 2401 7031
Fax +49 2401 7041
Internet Address www.busellatoglassmoulds.com
Booth Hall 14 E53
PRODUCT OVERVIEW
Internet Address www.bsh-kfz.de
Booth Hall 10 D22
PRODUCT OVERVIEW
PRODUCT DETAILS
Moulds
blank mouldblow moulds
01.13.06 Glass racks for transport and warehouse
01.13.07 Vehicles for glass transport
1214
glasstec
glasstec
Bystronic Maschinen AG
MyCatalog
MyCatalog
Automatic loading systems for individual requirements
Bystronic glass loading systems stand out due to their
high quality, reliability and long life time. The consistent
Address Industriestr. 5
CH-4922 Bützberg
Switzerland
Telephone +41 62 9 58 77 77
Fax +41 62 9 58 76 76
Internet Address www.bystronic-glass.com
Booth Hall 14 E24
modular system design facilitates the application of loading
systems of various designs, depending on requirements.
- Portal loading units
- Crane loading units
- Hydraulic loading units
- Tilt tables
http://www.bystronic-glass.com/global/com/de/products_architectural_glass/loading/index.php
PRODUCT OVERVIEW
first'sort
- space saving sorting system with dynamic intermediate buffer
- best possible material yield using optimal production sequence
- possible combination with subsequent production processes, e.g. direct
integration into the insulating glass production line
01.13.05 Warehouse technology
02.01.03 Devices for coating removal
02.01.04.01 Mechanical snapping devices
02.01.04.02 Thermal snapping devices
http://www.bystronic-glass.com/global/com/ene/products_architectural_glass/cutting/sorting_systems/index.php
02.02 Drilling technology
Storage systems
storer:
02.03.01.02 Grinding techniques for patterned glass
- Automatic left-over sheet storage for horizontal cutting lines
02.03.01.03 Grinding techniques for formed glass
- Increased left-over sheet capacity
03.03 Automotive glass
PRODUCT DETAILS
Automatic loading systems
- Less personnel deployment
- Integration into existing cutting lines
compactstorer:
- Automatic left-over sheet storage for horizontal cutting lines
- Increased left-over sheet capacity
- Less personnel deployment
- Integration into existing cutting lines
1215
glasstec
glasstec
MyCatalog
http://www.bystronic-glass.com/global/com/en/products_architectural_glass/storage_systems/index.php
MyCatalog
COMPANY NEWS
Live at the Bystronic glass stand
As the only machine manufacturer worldwide that can offer automated solutions for all
At glasstec 2008, the Bystronic glass group will once again present numerous new
products and developments for efficient processing of building and vehicle glass. A live
demonstration which has never been seen before at glasstec awaits visitors, during
which Bystronic glass will prove its competence as a supplier of complete system
solutions.
The theme of this year s glasstec Glass and Energy will also be handled via several
topics which will be presented at the stand and will be explored in decisive areas, such
as sustainability, energy efficiency, environmental protection, and environmentally
friendly use of resources.
Bystronic glass will present the following machines, among others, in the respective core
competences:
1. Glass cut
first´sort sorting system
The dynamic sorting system first´sort is equipped with seven harp racks and
demonstrates the modern solution for sorting flat glass in confined spaces quickly and
efficiently. The system requires an average of twelve seconds for one sorting process. At
the same time, first´sort offers sufficient freedom for individual production requirements.
For instance, Glass lites can be manually transferred inward and outward at numerous
positions. The system processes glass lites in thicknesses from three to ten millimetres
and formats from 190 x 350 millimetres to 2,500 x 1,600 millimetres.
2. Laminated safety glass production
Laminated safety glass line smart´lamiline
With smart´lamiline, Bystronic glass presents an effective entry-level solution for the
production of laminated safety glass, which makes an impact with a number of technical
extras. One of the features smart´lamiline has to offer is a fully automatic seaming
station prior to preliminary lamination. The customer can therefore freely decide on how
many millimetres of protrusion the foil has to be seamed. The fully automatic seaming
process is suited for any types of foil including twelve-layer foils with an overall strength
of 4.6 millimetres.
3. Insulating glass production
1216
glasstec
glasstec
Sealing robot compactsealer
The compactsealer from Bystronic glass has made a name for itself not only because of
its excellent cost/benefit ratio but also because of the unique value-added program that
is included for the customer. When opting for the compactsealer, customers receive an
immediately available, cost-effective sealing robot with a guaranteed worldwide fixed
price. Thanks to the revised control unit and user interface, operating the compactsealer
is now even easier.
Warm-edge applications
standard spacer systems, Bystronic glass will also accommodate the growing demand
for warm-edge products at the glasstec. Live demonstrations will regularly show the
application of spacers TPS® and SuperSpacer® with TriSealTM.
4. Handling devices
Bystronic glass will exhibit numerous handling devices in the area of vacuum suction
devices for use under a variety of conditions. A small variant of the Glasmaxilift, the
world s largest handling device, will be shown, among others.
5. Vehicle glass pre-processing
champ´grind
The most impressive features of the new generation of glass grinders champ´grind are
the significantly reduced processing times and a considerably improved operator
comfort.
The optimized acceleration and deceleration process ensures even more dynamic
grinding of the glass lites at a processing speed of up to 30 meters per minute. Better
cycle times can be achieved thanks to faster processing of the corners of convex
contours.
Also as far as maintenance is concerned, the new champ´grind is considerably more
user friendly. For instance, the grinding wheel diameter can be measured directly on the
machine. Besides, wheel replacement is done semi-automatically. Thanks to the new
closure, it is also possible to replace the spray housing much quicker.
6. Other products
Photovoltaic
MyCatalog
MyCatalog
Bystronic glass has reacted to the worldwide interest in photovoltaic systems. The
application of TPS® on semiconductor substrates will be shown live at the stand several
times a day.
Service & Support
The comprehensive service packages offered in the area of service & support will be one
of the topics presented by Bystronic glass at this year s glasstec. The service areas
hotline, spare parts catalogue, maintenance contracts and trainings, etc. will be
presented.
Bystronic glass press contact
Iris Minten
Phone +49 (0)7234 601 120
Fax +49 (0)7234 601 114
[email protected]
Messe Düsseldorf
1217
glasstec
glasstec
MyCatalog
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
MyCatalog
The combination of translucence and protection makes glass a very popular material in
architecture. Whether it is for interior fittings or the façade, the transparent material has
multiple applications. In particular safety glass is used where personal security and
increased safety should be combined with an attractive design.
Rüdiger Göpferich, Managing Director of sitec.glas, identified this trend long ago and
started with the production of SSG as far back as 1999. Today, the company based in
Waghäusel, Baden in Germany, produces approx. 250,000 sqm glass per year. "There is
still a great demand for single-lite safety glass, however, in the past few years, LSG has
experienced a true renaissance", says the company's founder. For this reason, the
company decided approximately two years ago to extend its product portfolio. Today,
LSG makes up about one third of the production.
The latest plant on the market
The plant on which the company sitec produces LSG comes from the Bystronic glass
group. "Our good experience with the handling devices from the Armatec Technology
Centre made the decision in favour of the LSG plant easy for us", Rüdiger Göpferich
recalls, adding: "The favourable price/performance ratio and the certainty of having
purchased the latest machine on the market were additional convincing arguments."
Visitors can admire the production of laminated safety glass lites up to a size of 2.60 x
6.00 meters in sitec's light-flooded halls with a total production area of 7,200 square
meters. The blue painted plant first lamiline fits perfectly into the production hall, because
when the hall was constructed, Rüdiger Göpferich had this investment already in the
back of his mind.
plant: Starting from a highly-efficient provisional laminate, which very accurately places
the glass plates on top of each other at high even assembly pressure, the heating zones
with infrared radiators and convectors, up to 3,500 square meters of laminate safety
glass are produced in every shift. The company's founder is particularly pleased that he
could purchase all components from one supplier: "Bystronic glass not only installed the
LSG plant in the hall, but delivered and put into operation all components necessary for
LSG production, from the washing machine, the clean room with air conditioning, the reel
unwinders for 16 PVB films, the autoclave car, to the handling devices." Thomas Fuchs,
Director of Production, soon found out that operation of this high-tech plant is very easy.
"Using the Laminoptic software, I am always in control of the production. Different orders
are administered and operating data are recorded via a user-friendly PC interface", he
reports.
Good experiences good partnership
But it was not just the technology that convinced Rüdiger Göpferich. "We have now
worked with the LSG plant for about one and a half years, and we are still very satisfied.
1218
glasstec
glasstec
MyCatalog
Already during our first meetings, I was impressed with the good advice that was offered.
Over time, it came into notice that the exceptional service was also an argument for
Bystronic glass", he states and explains that, for him, what matters most is
professionalism, speed and a pleasant unobtrusiveness on the part of the service
personnel. All in all, Rüdiger Göpferich is satisfied when he looks at his investment and
is convinced that cheaper Asian glass will not be competition for his company over the
medium term. "I am convinced that our high product quality and flexibility are the
decisive factors for retaining customers." Sitec-glas will therefore continue strengthening
its competence in individual and fast production and manufacture high-quality products
with love for detail.
Bystronic glass media contact
Iris Minten
Phone +49 (0)7234 601 120
Fax +49 (0)7234 601 114
[email protected]
MyCatalog
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Messe Düsseldorf
1219
glasstec
glasstec
MyCatalog
Die Kombination von Lichtdurchlässigkeit und Schutz machen Glas zu einem in der
Architektur beliebten Baustoff. Ob Innenausbau oder Fassade, die Verwendung des
transparenten Materials ist vielfältig. Insbesondere wo Personenschutz und erhöhte
Sicherheit kombiniert mit ansprechendem Design gewünscht sind, findet Sicherheitsglas
seinen Einsatz.
Diesen Trend hat Rüdiger Göpferich, Geschäftsführer von sitec.glas früh erkannt und
begann bereits 1999 mit der Produktion von ESG. Heute verarbeitet das Unternehmen
im badischen Waghäusel rund 250.000 Quadratmeter Glas pro Jahr.
Einscheibensicherheitsglas ist zwar nach wie vor gefragt, doch in den letzten Jahren
erlebt VSG eine wahre Renaissance , sagt der Firmengründer. Daher hat sich das
Unternehmen vor knapp zwei Jahren entschlossen, sein Produktportfolio zu erweitern.
Heute beträgt der Anteil an VSG gut ein Drittel der Produktion.
Die modernste Anlage im Markt
Die Anlage, auf der die Firma sitec VSG produziert, stammt von der Bystronic glass
Gruppe. Gute Erfahrungen mit Handlinggeräten aus dem Technologiezentrum Armatec
haben uns die Entscheidung für die VSG-Anlage leicht gemacht , erinnert sich Rüdiger
Göpferich und ergänzt: Das gute Preis-Leistungs-Verhältnis und die Gewissheit, die
modernste Maschine im Markt zu erwerben, haben uns außerdem überzeugt. So
können Besucher in sitecs lichtdurchfluteten Hallen mit einer Gesamtproduktionsfläche
von 7.200 Quadratmetern die Produktion von Verbundssicherheitsglas-Scheiben bis zu
einer Größe von 2,60 x 6,00 Metern bewundern. Die blau lackierte Anlage first lamiline
passt perfekt in die Produktionshalle, denn beim Hallenneubau hatte Rüdiger Göpferich
diese Investition bereits im Hinterkopf.
Das Besondere an der VSG-Linie von Bystronic glass ist die hohe Produktivität der
Anlage: Ausgehend vom hocheffizienten Vorverbund, der die Glasplatten mit hohem,
gleichmäßigem Pressdruck und äußerst exakt aufeinander bringt, den Heizzonen mit
Infrarotstrahlern und Konvektoren entstehen pro Schicht bis zu 3.500 Quadratmeter
Verbundsicherheitsglas. Der Firmengründer schätzt insbesondere, dass er alle
Komponenten aus einer Hand erwerben konnte: Bystronic glass hat uns nicht nur den
VSG-Verbund in die Halle gestellt, sondern von der Waschmaschine über den Reinraum
mit Klimaanlage, die Rollenabwicklung für 16 PVB-Folien, den Autoklavwagen und die
Handlinggeräte alle zur VSG-Produktion benötigten Bestandteile geliefert und in Betrieb
genommen. Und dass die Bedienung dieser hochtechnologischen Anlage dennoch sehr
einfach ist, konnte Produktionsleiter Thomas Fuchs schnell feststellen. Mit Hilfe der
Software Laminoptic habe ich die Produktion stets im Überblick. Die Verwaltung der
verschiedenen Aufträge und die Erfassung der Betriebsdaten erfolgt über eine
nutzerfreundliche PC-Oberfläche , berichtet er.
Gute Erfahrungen partnerschaftliches Verhältnis
Doch nicht nur die Technik konnte Rüdiger Göpferich überzeugen. Mittlerweile arbeiten
wir seit gut eineinhalb Jahren mit der VSG-Anlage und sind nach wie vor zufrieden.
Bereits während der ersten Gespräche hat mich die gute Beratung angesprochen. Im
Laufe der Zeit zeigte sich dann, dass auch der außergewöhnliche Service ein Argument
für Bystronic glass ist , berichtet er und erklärt, dass für ihn in erster Linie
Professionalität, Schnelligkeit und eine angenehme Zurückhaltung der Servicekräfte
zählen. Alles in allem blickt Rüdiger Göpferich zufrieden auf seine Investition und ist sich
MyCatalog
sicher, dass günstigeres, asiatisches Glas für seine Firma mittelfristig keine Konkurrenz
darstellt. Ich bin davon überzeugt, dass unsere hohe Produktqualität und Flexibilität die
entscheidenden Faktoren in der Kundenbindung sind. Daher wird sitec-glas seine
Kompetenz in individueller und schneller Produktion auch weiterhin stärken und
hochwertige Produkte mit Liebe zum Detail fertigen.
Iris Minten
Phone +49 (0)7234 601 120
Fax +49 (0)7234 601 114
[email protected]
Mehr Informationen
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
1220
glasstec
glasstec
Passwort:
Passwort vergessen?
C.RE.F.IN. S.r.l.
Address Via E. De Filippo, 29
30038 Spinea
Italy
Telephone +39 041 991246
Fax +39 041 5410716
Internet Address www.crefin.it
MyCatalog
MyCatalog
adeguate solutions in order to reduce the stockpilling at the warehouse, as
wll as to prepare the executive project for preventive, conservative and
corrective maintenance.
C.RE.F.IN. S.r.l. can, if needed, cooperate with your technicians on a full
on-site inspection of systems installed in your plants, finding the best
solutions for a maintenance project.
Manutenzione
C.RE.F.IN. S.r.l. è in grado di svolgere attività manutentive, in tutte le aree
geografiche, compreso il global-service con o senza gestione diretta dei
materiali di impiego. Siamo da subito disponibili a collaborare per
individuare, sotto la Vs. Direzione Tecnica, le migliori soluzioni miranti
all'unificazione dei ricambi per il contenimento delle giacenze pronto
impiego ed alla formulazione dei piani operativi nell'ambito della
manutenzione preventiva, conservativa e correttiva.
La società C.RE.F.IN. S.r.l., qualora richiesto, dichiara la propria
disponibilità a partecipare con i Vs. tecnici alla verifica del patrimonio
installato negli impianti per meglio caratterizzare l'ipotesi del piano
manutentivo.
Booth Hall 14 A08
PRODUCT OVERVIEW
Carbone Lorraine Composants S.A.S.
01.04.04 Smelting technology for pot furnaces
PRODUCT DETAILS
Heating services
MAINTENANCE and DRYING SERVICES
Either on its own or in co-operation with partners of proven experience,
C.RE.F.IN S.r.l. is in a position to deliver a full range of refractory retrofit
services (overcoating, lining etc.).
In addition, working with our skilled staff and with our equipment, we carry
out different refractory drying and/or pre-heating services.
Maintenance services
C.RE.F.IN S.r.l. can provide the maintenance services in all geografic
areas, including the global-service with or without the direct administration
of material supplies. We are in a position to offer an immediate
co-operation, under your techical supervision, in locating the most
Address 41 rue Jean Jaurès
92230 Gennevilliers
France
Telephone +33 1 41854300
Fax +33 1 41854511
Internet Address www.carbonelorraine.com
Booth Hall 13 C06
PRODUCT OVERVIEW
01.06.01 Gob feeder
01.06.04 Bar feeder
1221
glasstec
glasstec
MyCatalog
MyCatalog
Car-Met S.p.A.
03.04.01 Photovoltaics
PRODUCT DETAILS
CARBON/CARBON COMPOSITES
Carbon/carbon composite materials are especially used in aircraft braking
systems.
Their light weight allows them to save fuel. Maintenance costs are reduced,
thanks to their resistance. They are secure, whereas they absorb the
energy released during an emergency braking sequence (an Airbus moving
at a speed of 320 km/h has to stop over a distance of 1200 m), while
operating perfectly at over 1600° C.
Hot Handling equipment
Carbone Lorraine is at the heart of glass manufacturing processes.
Traditional methods (manufacturing bottle, and color-TV tubes ) :
hot-handling equipment made of graphite.
Address Via Cavour, 9
31010 Cimetta di Godogne (TV)
Italy
Telephone +39 0438 794784
Fax +39 0438 795320
Internet Address www.carmetspa.it
Booth Hall 14 E70
PRODUCT OVERVIEW
01.12.03 Strengthening coating
03.02.01 Tempered glass
PRODUCT DETAILS
BELT LENGTH: 3800 mm.
Heating recovery in differentiated counter-current
Internal dimensions: cm 110x130xh 50.
1222
glasstec
glasstec
Special heating lehrs for the glass operating-machines blow-moulds.
- Electronic temperature control.
- Heating gas.
- The trolley just store and retreat the moulds, so they can't be heated by
the lehr.
MyCatalog
MyCatalog
Features and performances
POLIMAT/MC is an innovative proportional dosing system, completely
operated through computer, able to make solutions-emulsions at a
rigorously constant concentration. The computer controls each operation
and signals every possible anomaly.
POLIMAT/MC is, at present, the most interesting proposal to feed spraying
systems for superficial treatment of glass containers (cold-end).
Thanks to its features, POLIMAT/MC is also suitable to dose and feed
products used in shears lubrification (cutting-gob).
Cestaro s.n.c.
Address Strada Torino, 54
10040 Cumiana (TO)
Italy
Telephone +39 011 9058816
Fax +39 011 9070333
Internet Address
Changshu Brother Glass Mould Co., Ltd.
Booth Hall 13 F21
PRODUCT OVERVIEW
Address Shajiabang Town, Changshu City
Jiangsu Province
China (Rep.)
Telephone +86 512 52508333
PRODUCT DETAILS
POLIMAT/MC
Fax +86 512 52500778
Internet Address www.brother-mould.com
Booth Hall 10 C81
PRODUCT OVERVIEW
1223
glasstec
glasstec
PRODUCT DETAILS
MyCatalog
MyCatalog
name: M 1230
material: JH 4
MOULD FOR GLASS INDUSTRIES
MOULD FOR GLASS INDUSTRIES
Mould for cup
name: CP-312
material: SUS431
Changshu Jianhua Die Sets Co., Ltd.
Address Shajiabang Town, Changshu City
215559 Jiangsu Province
China (Rep.)
Telephone +86 512 52501847
Changshu Jinggong Mould Mfg Co., Ltd.
Fax +86 512 52500838
Internet Address www.jhmould.com
Booth Hall 10 A04-12
PRODUCT OVERVIEW
PRODUCT DETAILS
Blank mould of drink bottle
Address East of Shajiabang
215559 Changshu, Jiangsu Province
China (Rep.)
Telephone +86 512 52506563
Fax +86 512 52502888
Internet Address www.csjg.com
Booth Hall 13 E72
PRODUCT OVERVIEW
PRODUCT DETAILS
Series of mould bererage bottle
1224
glasstec
glasstec
MyCatalog
MyCatalog
Mold for Beverage Bottle
Three-part glass bowl mould
Mould
Mold for Food Jar
Changshu Weiheng Mould Manufacture Co., Ltd.
Address Kuncheng Village Yushan Town,
Changshu
Jiangsu
215558 Changshu
China (Rep.)
Telephone +86 512 52838178
Fax +86 512 52828168
Internet Address www.weiheng.cn
Booth Hall 10 D30-1
China Starlight Refractory Co., Ltd.
Address Yunhe Industrial Zone, Huoxian
Town,
Tongzhou District, Beijing
101109 Beijing
China (Rep.)
Telephone +86 10 80587751
Fax +86 10 80587051
PRODUCT OVERVIEW
PRODUCT DETAILS
Mould
Internet Address www.csrazs.com
Booth Hall 10 E30-1
PRODUCT OVERVIEW
1225
glasstec
glasstec
PRODUCT DETAILS
Alumina fused cast refractories
Alumina fused cast refractories are whereby highly pure alumina raw
material is melted at over 2000°C and poured into a mold. Comparing with
fused cast AZS refractories, their contamination to molten glass is very low.
They are perfect compliments to the AZS rang for sensitive application.
MyCatalog
MyCatalog
Ergonomic Glass Lifters
NT Glass Lifter
- pneumatically powered glass lifter equipped with two-speed lifting and
tilting
- endless rotation around suspension
- endless rotation of the gripper
NTT Glass Lifter
- pneumatically powered telescopic glass lifter equipped with two-speed
lifting and tilting
Cimec Oy
Address Lastikankatu 3
33730 Tampere
Finland
Telephone +358 3 2131575
Fax +358 3 2131577
Internet Address www.cimec.fi
- extremely suitable for lifting jobs in low room that cannot be performed by
traditional lifters
NV Glass Lifter
- pneumatically powered glass lifter equipped with two-speed lifting
Lifting capacities 150 - 400 kg
Booth Hall 14 B60
The Cimec ergonomic Glass Lifter allows you to work with one man only
without risking the user s health even when lifting very big glass sheets.
PRODUCT OVERVIEW
PRODUCT DETAILS
By means of Cimec multi-function Control Arm you can utilize the entire
loading area from one side only thus avoiding the additional turnings of the
glass.
http://www.cimec.fi
ErgoLevel Glass Lifter
NTe Glass Lifter
- pneumatically powered glass lifter equipped with two-speed lifting and
tilting
Glass Lifter for Heavy IG-units
NVer Glass Lifter
- pneumatically powered glass lifter equipped with two-speed lifting.
- pneumatically operating Edge Support - NO SLIDING
Equipped with ErgoLevel Control arm ==> permanent height of the control
panel and handles
- up to 400 kg
Extremely suitable for continuous work.
The new lifter is equipped with pneumatically operating supports which will
prevent sliding of the glass sheets while lifting IG-units from a production
line. Handling of the fresh IG-unit has always been difficult and dangerous
operation and due to growing glass sizes and thicknesses it has become
even more difficult. This problem can be solved now by this New IG-lifter
- one person operation
1226
glasstec
glasstec
which suites for different types of production lines. The lifting device has
been developed together with our customers to fulfill their requirements.
http://www.cimec.fi/news.htm
COMIT S.r.l.
MyCatalog
MyCatalog
COMIT S.r.l.
Address Via Consortile Z.I.
81032 Carinaro (Ce)
Italy
Telephone +39 081 5016371
Address Via Consortile Z.I.
81032 Carinaro (Ce)
Italy
Telephone +39 081 5016371
Fax +39 081 5034348
Internet Address www.comit-srl.it
Booth Hall 10 E57
Fax +39 081 5034348
Internet Address www.comit-srl.it
PRODUCT OVERVIEW
Booth Hall 14 D50
PRODUCT DETAILS
PRODUCT OVERVIEW
PRODUCT DETAILS
Moulds for hollow glass industry
- Cast iron and Bronze welded blow moulds;
- Blanks, bottom plates and baffles for Verti Flow and Vacuum processes.
Moulds for hollow glass industry
- Cast iron and Bronze welded blow moulds;
COMMERSALD IMPIANTI S.r.l.
- Blanks, bottom plates and baffles for Verti Flow and Vacuum processes.
Address Via Labriola, 39
41100 Modena
Italy
Telephone +39 059 822374
Fax +39 059 333099
Internet Address www.commersald.com
Booth Hall 14 C79
1227
glasstec
glasstec
PRODUCT OVERVIEW
MyCatalog
MyCatalog
02.12.05 Waste water treatment
PRODUCT DETAILS
PRODUCT DETAILS
Glass Moulds
01.02.03 Lubricators and coolants
Special lubricants for flat glass and hollow glass industry
CONDAT is designer, developer and manufacturer of technical lubricants
for more than 150 years with worldwide presence.
We offer a complete range of products and equipment meeting
requirements of the hollow and flat glass processes.
For the hollow glass:
Shear spray lubricants, neat oils for delivery systems, dual-component
product for the dry delivery coating, graphited varnish for mould
lubrication, lubricants for SWABBING, oils for conveyor belt chains
For the flat glass:
Neat oils for cutting, a complete range for edge grinding, solutions for water
treatment problems.
CONDAT also offers a complete range of maintenance products: oils and
greases.
Condat Lubrifiants
Address 104, avenue Frederic Mistral
38670 Chasse-sur-Rhone
France
Telephone +33 4 78073838
Fax +33 4 78073800
Internet Address www.condat.fr
Beyond furnishing lubricants, CONDAT makes a commitment to develop a
partnership with its customers and offers them a complete service (analysis
of products and water, environmental advice, assistance concerning
regulatory information, ) and suitable equipments (dosing units, oil
separator, ).
CONDAT main goal is to develop products that respect the environment
and that follow the latest European regulations (REACH, Biocides).
http://www.condat.fr/lubrifiants/lubrifiants-verre.htm
Booth Hall 13 D80
PRODUCT OVERVIEW
02.11.08.02 Chemical grinding and polishing materials
02.11.08.03 Chemical coolants
02.11.08.07 Other chemicals
1228
glasstec
glasstec
MyCatalog
COMPANY NEWS
At GLASSTEC 2008, CONDAT, designer, developer and manufacturer of technical
lubricants for more than 150 years, with worldwide presence, will be presenting a
complete range of products and equipment meeting the requirements of the flat glass
process.
At GLASSTEC, CONDAT will show new products developed to respect the environment
Whether it is for float, architectural or automotive processes, CONDAT offers:
- Neat oil for cutting
- A complete range for edge grinding
- Solutions for water treatment problems.
- A complete range of maintenance products
Beyond furnishing lubricants, CONDAT makes a commitment to develop a partnership
with its customers and offers them a complete service (analysis of products and water,
environmental advice, assistance concerning regulatory information, ) and suitable
equipments (dosing units, oil separator, ).
NEWS PRODUCTS
CONDAGLASS FA 550 B
Synthetic soluble fluid
CONDAGLASS FA 550 B is a cutting synthetic soluble fluid, designed for edge grinding
operations.
This innovative fluid complies with the biocides European directives and presents the
following advantages:
Very High resistance to mechanical foaming
Keep the cutting power of grinding wheel
Resistance to bacteria and fungi.
CONDAGLASS FA 550 B is a user-friendly product as it does not include any dangerous
MyCatalog
compounds (nitrites, glycol ethers e.g. ethylene glycol, DEA, hydrocarbon compounds,
formaldehyde). It is a none irritating / sensitizing product.
CONDAGLASS FCV
High performance flocculent range
CONDAGLASS FCV flocculent range was especially developed to insure an optimal
result with the water treatment operations.
These 2 in 1 products cover both coagulant and flocculent functions at the same time,
so limiting the operations.
For a maximum efficiency, CONDAT and its laboratory will advise the correct dosage so
to limit the water consumption and waste.
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
1229
glasstec
glasstec
Login Code:
Password:
Create user account
MyCatalog
MyCatalog
At GLASSTEC 2008, CONDAT, designer, developer and manufacturer of technical
lubricants for more than 150 years with worldwide presence, will be presenting a
complete range of products and equipment meeting requirements of the hollow glass
process.
This range notably offers:
- Soluble lubricants for shear spray and for the delivery system
- Neat oils for delivery system
- Dual-component product for the dry delivery coating
- Graphited varnish for mould lubrication
- Lubricants for SWABBING
- Oils for conveyor belt chains
- A complete range of maintenance products oil and greases mineral and synthetic
Beyond furnishing lubricants, CONDAT makes a commitment to develop a partnership
with its customers and offers them a complete service (analysis of products and water,
environmental advice, assistance concerning regulatory information, ) and suitable
equipments (dosing units, oil separator, ).
NEW PRODUCTS
BIOGLASS Range
For shear spray
The BIOGLASS range has been experienced for more than 40 years in the hollow glass
industry.
This range is composed of soluble fluids that can be used as recycled or lost product, in
soft or hard water environments.
It offers the following advantages:
- Elimination of spray clogging
- Clean nose underneath the feeder
- Avoid the defects on finished products
The products of this range are user-friendly products as they do not include dangerous
compounds (nitrites, glycol ethers e.g. ethylene glycol, DEA, hydrocarbon compounds,
formaldehyde). They are none irritating / sensitizing products.
Gamme GLASS DLS BIO
For delivery lubrication
This range was principally designed to replace neat oils in the lubrication of delivery
systems with a major concern on environmental protection.
These soluble oil formulations are based upon vegetable oil. They are biodegradable
and compatible with water treatment stations.
They can be diluted in water, which offers an obvious economic advantage.
As per the BIOGLASS range, these products are user-friendly as they do not include any
dangerous compounds.
1230
glasstec
glasstec
MyCatalog
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
MyCatalog
CONMAC GmbH, Maeda-Minikrane
Address Am Pferdemarkt 1 A
30853 Langenhagen
Germany
Telephone +49 511 96352-0
Fax +49 511 96352-59
Internet Address www.conmac.de
Booth Hall 11 G20
PRODUCT OVERVIEW
01.13.08 Construction and glazing equipment
PRODUCT DETAILS
MC 104
Vollkommen neues hydrostatisches Getriebeäußerst kompakte Bauweise nur 600 mm breitEinzigartiger vollautomatischer fünfeckiger teleskopischer
VierstufenmastKabelfernbedienung
Der Maeda MC 104 ist ein sehr kompakter und flexibler miniKRAN.
Mit seinem geringen Eigengewicht und seinen niedrigen Abmessungen ist
er sehr leicht zu transportieren und kann auch auf schwierigsten Wegen in
Gebäude gebracht werden, selbst über Aufzüge, Treppen oder in Bereiche,
die mit anderen Hebewerkzeugen schwierig oder gar nicht zu erreichen
sind. Mit seiner Kranöse kann er leicht über Geländehindernisse oder auf
Dächer gehieft werden. Dafür bietet er eine enorme Tragkraft und eignet
sich bestens, z.B. um schwere Glasscheiben anzuheben. Er ist extrem
beweglich und flexibel und geht auch in schwer zugängliche Ecken und
entlegene Winkel.
MC 285
Hydrostatisches Getriebe, stufenlos vorwärts und
rückwärtsVollautomatischer fünfeckiger teleskopischer
FünfstufenmastSchlanke Karosserie, nur 750 mm breitZentrale
Tandem-RaupenLeistungsfähige Winde für DauereinsatzAlarm bei
Ungleichgewicht
Der Maeda MC 285 kann mit einem Kombiantrieb (Diesel und
1231
glasstec
glasstec
MyCatalog
Elektro) ausgestattet werden. Er hat ein Eigengewicht von 1.900 kg, eine
Tragkraft von 2.820 kg und eine max. Hakenhöhe von 8,70 m. Mit seinen
Maßen lässt dieser Minikran sich sehr leicht handeln, auch in schwierigen
Situationen und besser als jedes vergleichbare Gerät. Durch sein geringes
Eigengewicht kann der Maeda MC 285 auch mittels Anhänger, Transporter
oder Pritschenfahrzeug transportiert werden.
Control & Heating Systems
Address Sankt-Albans-Weg 8 A
34587 Felsberg
Germany
Telephone +49 5662 9472-0
Fax +49 5662 9472-22
Internet Address www.ch-systems.de
Booth Hall 14 B06
PRODUCT OVERVIEW
MyCatalog
wartungsarm. Der spezielle Düsenaufbau gewährleistet einen stabilen und
superleisen Betrieb, weshalb sie auch für den Einsatz in Schauhütten
geeignet sind.
Eigenschaften
- unterschiedliche Leistungen
- umweltfreundlich
- kompakt
- wartungsarm
- geräuscharm
- servicefreundlich
- vielfältiges Zubehör
- Standard- oder Spezialflammrohr
- mit Standardstecker, Klemmleiste
oder Industriestecker
http://www.ch-systems.de
01.04.09.01 Combustion technology for oil and gas fired smelting furnaces
PRODUCT DETAILS
Einstufige Brenner
Einstufige Brenner
Die zur Verfügung stehenden Brenner der Dreizler GmbH wurden
speziell für den Einsatz im Bereich Glas und Keramik abgestimmt und mit
hochwertigen Werkstoffen ausgerüstet, so dass sie den schwierigen und
teilweise widrigen Einsatzbedingungen an Kühlbahnen, Kühlöfen,
Auftreibtrommeln und Studioöfen gerecht werden.
Unsere Brenner sind leicht zu installieren, zu bedienen und extrem
Cugher Glass S.r.l.
Address Via Fano, 1
20161 Milano
Italy
Telephone +39 02 66207762
Fax +39 02 66202917
Internet Address www.cugherglass.com
Booth Hall 12 A21
1232
glasstec
glasstec
MyCatalog
PRODUCT OVERVIEW
01.10.03 Inspection systems
01.10.06 Stacking machines
02.03.08.01 Screen printing techniques
02.03.08.04 Other screen printing machines
02.06.02 Enamel glass machines, screen printers, thermal pressure equipment
PRODUCT DETAILS
MyCatalog
PRODUCT DETAILS
01.03.10 Ventilation systems
Industrial Fans
If you need Industrial fans in your installation, we can then help you thanks
to our large range of fans. Indeed, all our Fans are high quality equipment,
which were developed following new methodology and stringent standards
to offer a high quality equipment with large performances. This new
approach guarantees you a very high quality product at a attractive price
within a short délivery time.
Our fans are composed of many ranges with different aeraulical
characteristics. Together these ranges have total pressures going to 5000
daPa and 100 m³/s flow for a maximal temperature of fluid of 800°C.
Moreover these fans can be delivered with a whole range of options.
Handling
Systems for in line handling, inspection, load and unload
De Raedt Industrial Fans
Address Parc Industriel du Monceau
4130 Tilff
Belgium
Telephone +32 4 2288585
Fax +32 4 2288584
Internet Address www.deraedt.be
Booth Hall 13 F24
PRODUCT OVERVIEW
DMA Maschinen- und Anlagenbau GmbH & Co. KG
Address Eugen-Diesel-Str. 8
37671 Höxter
Germany
Telephone +49 5271 9706-0
947-2001
Fax +49 5271 9706-99
947-2002
Internet Address www.dma.de
Booth Hall 14 C49
PRODUCT OVERVIEW
1233
glasstec
glasstec
PRODUCT DETAILS
Conveying Systems
MyCatalog
MyCatalog
PRODUCT OVERVIEW
01.05.03 Casting and rolling technology
03.01.04 Cast glass, ornamental glass
03.01.07 Wired glass
PRODUCT DETAILS
Walzanfertigung
Die Herstellung und Gravur von Präge- und Druckwalzen verschiedener
Dimensionen und Einsatzbereiche erfordern ein hohes Maß an Erfahrung.
Glass and Beverage
DMA Maschinen- und Anlagenbau GmbH & Co. KG supplies complete
lines for the "Cold-End-Area" including PLC-control for the glass industry.
DSF Refractories & Minerals Ltd
The product range includes:
- Rinser for PET and glass bottles
- Bottle and jar inverter
- Conveyors for bottles
- No-pressure separations
- Conveyors for crates and cases
- Vertical side grip conveyors
- Slat band chain conveyors
Address Friden, Newhaven, Nr. Buxton
SK17 0DX Derbyshire
United Kingdom
Telephone +44 1629 636271
Fax +44 1629 636892
Internet Address www.dsf.co.uk
Booth Hall 12 B36
- Complete line control systems
PRODUCT OVERVIEW
Dornbusch Gravuren GmbH
Address Am Selder 31
47906 Kempen
Germany
Telephone +49 2152 9165-0
Fax +49 2152 518394
Internet Address www.dornbusch-gravuren.de
PRODUCT DETAILS
Chemcast Frisil A1
DSF Chemcast Frisil A1 is a low iron fired sillimanite refractory produced by
ethyl silicate casting. It can be produced in complex shapes and has good
resistance to chemical attack and thermal shock. Chemcast Frisil A1 has
many applications in the glass industry including forehearth superstructure,
burner blocks and float glass tin bath roof tiles.
Booth Hall 10 D47
1234
glasstec
glasstec
Chemcast Frisil H
DSF Chemcast Frisil H is a high quality fired sillimanite material which
exhibits excellent creep and thermal shock resistance. Used extensively in
forehearth construction as roof and burner blocks, it is entirely suited to a
wide range of glass manufacturing environments including container,
tableware, lighting and fibre glass. It can also be used in glass contact
channels and complex regenerator and recuperator shapes.
MyCatalog
MyCatalog
Eclipse, Inc.
Address 1665 Elmwood Road
61103 Rockford, IL
USA
Telephone +1 815 8773031
Dura Temp Corporation
Fax +1 815 8773336
Internet Address www.eclipsenet.com
Address 949 S. McCord Rd.
43528 Holland, OH
USA
Telephone +1 419 866-4348
Fax +1 419 866-4656
Internet Address www.duratemp.com
Booth Hall 13 B01
PRODUCT OVERVIEW
01.04.05 Gas equipment and supply systems
Booth Hall 13 C86
PRODUCT OVERVIEW
PRODUCT DETAILS
PRODUCT DETAILS
Rollers
Float, Bending, Tempering
Eclipse Brightfire Burner
Eclipse will showcase the Brightfire burner, an adjustable low NO air-fuel
burner. Brightfire is the perfect choice for burner conversions from oil to gas
firing. It provides up to 35 percent lower NOx emissions and superior flame
control compared to other burners. In addition, the Brightfire provides a
wide turndown ratio. Its sleek design will accommodate the tightest port
constraints and provide years of trouble-free service. The burner's low NOx
emissions and superior flame control are accomplished through a
combination of coaxial annular and central core flow streams. Eclipse has
successfully installed the Brightfire in over 400 glass furnaces around the
world as burner retrofits and in new furnace installations.
1235
glasstec
glasstec
MyCatalog
COMPANY NEWS
Clean Heat, Clean Air
"burning into a greener future"
New burner technologies and combustion systems to minimize emissions and safe
energy. Please visit us on our booth, let´s talk about
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
MyCatalog
Clean Head, Clean Air
"burning into a greener future"
Neueste Brennertechnologie und Systemlösungen zur Minimierung der Emissionen und
Energieeinsparung. Besuchen Sie auf usnerem Stand, wir beraten Sie gerne.
Mehr Informationen
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
1236
glasstec
glasstec
EGLASS Machinery & Parts GmbH
Address Kastanienstr. 12
98693 Ilmenau
Germany
MyCatalog
MyCatalog
eliminated and the gas content in the glass melt can be reduced.
All DHPS® of the company EMP are tailor-made designed and
manufactured according to the customer s demands (glass type, pull rate
etc.).
Eirich GmbH & Co KG, Gustav, Maschinenfabrik
Telephone +49 3677 201989
Fax +49 3677 205136
Internet Address www.eglass-emp.de
Booth Hall 14 A31
Address Walldürner Str. 50
74736 Hardheim
Germany
Telephone +49 6283 51-0
Fax +49 6283 51-325
PRODUCT OVERVIEW
Internet Address www.eirich.com
Booth Hall 15 A17
01.05.02 Glass drawing technique
PRODUCT OVERVIEW
01.06.01 Gob feeder
01.06.03 Suck feeder
01.03.05 Pelletising technology
01.06.04 Bar feeder
02.12.06 Treatment of wheel and polishing wharf
01.07 Equipment for glass tube production
PRODUCT DETAILS
PRODUCT DETAILS
01.06.04 Bar feeder
Direct Heated Platinum System - DHPS®
The Direct Heated Platinum Systems - DHPS® designed by EMP are used
for high tech glass feeding. The DHPS® is made by precious metal alloy.
This guaranties that even at high temperatures no impurities by corrosion of
the feeder material contaminate the glass melt.
The DHPS® contains of one or more separated electrical heated modules.
Current heats up the tubes of precious metal alloy. The temperature is
transmitted to the glass melt. In this way the glass melt can be cooled down
or heated up regularly. In different modules of the DHPS® the chemical
homogeneity of the glass melt can be improved (for example by stirring) up
to optical quality. In the DHPS® - Refiner bubbles up to 0.1 mm can be
Ihr Produkt ist nie besser als die Mischung
Eirich ist seit mehr als 100 Jahren in der Entwicklung der industriellen
Mischtechnik tätig. Viele Patente, die generell gute Zusammenarbeit mit
den Anwendern und die Partnerschaft mit Forschung und Lehre begründen
den guten Ruf des Eirich-Intensivmischers - weltweit.
Eirich verfügt über ein umfassendes Know-how in der Granulie
1237
glasstec
glasstec
Keramik
Pressmassen, Molekularsiebe, Proppants, Varistorenmasse,
Dentalmassen, Schneidkeramik, Schleifmittel, Oxidkeramik, Mahlkugeln,
Ferrite, etc.
Baustoffe
Porosierungsmittel für Ziegel, Blähton, Perlit, etc.
Glas
Glasmehl, Kohlenstoff, Bleiglasgemenge, etc.
Metallurgie
Eisen-, Zink- und Bleierze, Aluminiumoxid, Siliciumcarbid, etc.
Agrochemie
Kalkhydrat, Dolomit, Phosphatdünger, Torfdünger, Mineralstoffe,
Zuckerrübensamen, etc.
Umweltschutz
Filterstäube, Flugaschen, Schlämme, Stäube, etc.
MyCatalog
MyCatalog
PRODUCT DETAILS
Glass Level Sensors
The Electroglass Glass Level Sensor employs a static refractory probe
block installed in the side of the furnace working end or
forehearth,equipped with fixed platinum alloy probes,connected to the level
sensing/control unit.The system requires no water or air cooling or other
special services.It has no moving parts and is effectively maintenance free.
Electroglass Ltd
Address 4 Brunel Road, Manor Trading Estate
SS7 4PS Benfleet, Essex
United Kingdom
Telephone +44 1268 565577
Fax +44 1268 565594
Internet Address www.electroglass.co.uk
Booth Hall 13 C31
PRODUCT OVERVIEW
All-Electric Furnaces
Electroglass designs and supplies continous cold-top all electric glass
furnaces with outputs ranging from 200kg per day,to 200 tonnes per day.
Electroglass electric furnaces are available for almost every glass
type,including soda lime glasses for
containers or tableware,glass wool and continous fibre glasses,hard and
soft borosilicate glasses,
flouride opal and borosilicate opal glasses,lead glassesfor tubing and
tableware,TV panel/funnel glasses,and a range of special purpose and
technical glasses.
Convection Current Control Boosting Systems
01.04.01 Batch charging technology
1238
glasstec
glasstec
Electroglass Convection Current Control(CCC)boosting technology was
first introduced in the early 1980's.
Continous development since then,and the experience of over 75 CCC
syste,s in operation,he resulted in ever greater boost energy effiency and
glass quality improvement.
Convection Current Control Boosting releases heat directly into the main
body of the glass.By optimising electrode locations,spacing,immersions and
electrical connection arrangements in relation to each individual
application,furnace and glass type,CCC boosting creates controlled positive
convection currents in the furnace,improving heat transfer from the top
firing,increasing minimum residence times,homogenising the melt to
produce fully refined glasswith a consistent thermal history.
MyCatalog
MyCatalog
Für eine diskontinuierliche Arbeitsweise können wir folgende Lösungen
anbieten:
- Schwerkraftbiegeofen Typ "GBO" in Haubenausführung
- Schwerkraftbiegeofen Typ "GBO" bis 750 °C
Wahlweise stehen folgende Funktionsausführungen zur Verfügung:
- im Tandemprinzip mit zwei nebeneinander angeordneten Öfen
- im Shuttleprinzip mit wechselseitig beschickbaren Unterteilen
EME Maschinenfabrik Clasen GmbH
ELIOG-kelvitherm Industrieofenbau GmbH
Address Käthe-Kollwitz-Str. 10
98631 Römhild
Germany
Telephone +49 36948 820-0
Fax +49 36948 820-36
Internet Address www.eliog.de
Address Bernhard-Hahn-Str. 11-15
41812 Erkelenz
Germany
Telephone +49 2431 9618-0
Fax +49 2431 74687
Internet Address www.eme.de
Booth Hall 15 B25
Booth Hall 13 C57
PRODUCT OVERVIEW
PRODUCT OVERVIEW
01.03.03 Metering and weighing technology
PRODUCT DETAILS
02.09.01.01 Furnaces for thermal pre-tempering of glass
PRODUCT DETAILS
Schwerkraftbiegen
CULLET TREATMENT
As a result of the continued rise in the cost of raw materials and energy,
and increased environmental awareness in the population a higher
proportion of recycled glass is now added to the melt.
Recycled foreign cullet always contains contaminants that can lead to gas
or stone formation, or other faults in the final product.
The most common contaminants are adherent dirt, ceramics, metal
closures, paper and plastic. Cullet treatment plant is used to remove these
contaminants so that good glass quality is retained even when a high
1239
glasstec
glasstec
proportion of cullet is added to the melt.
EME have developed treatment concepts and equipment for all glass
sectors and applications, including:
Holloware
Glass wool
TV tubes and
Laminated glass.
Many factors govern the decision about the type of treatment method to be
used.
We should be pleased to discuss which installation concept would be most
suitable for your application.
MyCatalog
MyCatalog
04.01.01 Mechanical tools
05.01.01.04 Measurement and control of glass thickness
05.01.02.01 Surface, contour and imperfection measurement and control
05.02.04 Controls for glass inspection machines
05.03.02 Inspection, protocolling and diagnostic systems
FACTORY CULLET TREATMENT
During glass production cullet is created on the processing machines.
Experience has shown that it is important to treat the cullet in the factory
itself and return it to the melting process. This not only largely reduces the
risk of contamination by foreign objects,
but also avoids unnecessary and, above all, uneconomic transport and
intermediate storage. A cullet recycling system should be installed on each
melter, so that different glass types do not become mixed.
PRODUCT DETAILS
01.06.01 Gob feeder
555 Servo Feeder
Improves gob forming and loading at rates from 1 to 250 cuts /
minuteAllows user to change feeder plunger parameters while feeder is
runningSpeeds job changes and allows quick save / recall of all critical job
information
Emhart Glass SA
01.06.05 Shear blades
Address Hinterbergstr. 22
6330 Cham
Switzerland
Telephone +41 41 7494200
565 Servo Shear
Parallel Shears - Quick reliable cutting at rates of 1 to 250 cuts /
minuteSynchronized cutting forms consistent gob shapes and weights with
reduced shear marksImproves gob loading
Fax +41 41 7494271
Internet Address www.emhartglass.com
Booth Hall 13 B41
PRODUCT OVERVIEW
01.06.01 Gob feeder
01.06.08 Press-blow-machines
1240
glasstec
glasstec
MyCatalog
COMPANY NEWS
1. Einleitung
Ein wichtiger Schritt bei der Hohlglasherstellung ist das Pressen des Glases mit einem
sogenannten Pegel. Da dieser Pegel in direktem Kontakt mit dem etwa 1100°C heissen
Glas ist, erfährt er eine enorme Wärmebelastung und muss gekühlt werden. In der
Praxis erfolgt die Kühlung mit Luft, die über ein mit Löchern versehenes Kühlrohr an die
Pegelinnenseite geführt wird.
Diese Studie bescheibt die Entwicklung und die Validierung eines 3D
Berechnungsmodells, das die Massenstrom- und Temperaturvetrteilung im
Pegel/Kühlrohrsystem abbildet. Mit diesem Modell werden die entscheidenen
Designparameter des Pegel/Kühlrohrsystems bestimmt. Die Arbeit wurde im Rahmen
eines IPGR (International Partners in Glass Research) Projektes angefertigt. Die IPGR
ist ein internationaler Zusammenschluss von zur Zeit sieben Glashütten. Neben einer
engen Kooperation in hüttenübergreifenden Projekten werden auch forschungsnahe
Projekte gefördert. Im Rahmen dieses IPGR Projektes wurden sowohl ein stationäres als
auch ein instationäres Modell entwickelt. Die Darstellung beschränkt sich hier auf den
stationären Teil.
Als erster Schritt der Modellentwicklung werden die notwendigen Randbedingungen
formuliert. Diese Bedingungen werden dann im kommerziellen CFD (Computanional
Fluid Dynamics) Programm Fluent gesetzt. Fluent erlaubt dabei die gekoppelten Impuls
und Energieerhaltungsgleichungen zu lösen. Dieses Modell wird in einem weiteren
Schritt mit Laborversuchen validiert.
Mit dem validierten Modell werden die Hauptfaktoren identifiziert, die die Massenstrom
und Temperaturverteilung beinflussen. Dazu wird die Design of Experiment Methode
verwendet. Auf diesen Erfahrungen basierend werden Vorhersagen und
Optimierungsvorschläge für ein existierendes Design simuliert. Diese Simulationen
werden in einem Feldversuch mit Messdaten verglichen.
2. Berechnungsmodell
2.1. Berechnungsprinzip
Wie oben erwähnt basiert das Modell auf dem kommerziellen CFD Programm Fluent.
Dieses Programm ist eine universelle Plattform zum Lösen von gekoppelten thermischen
und strömungstechnischen Problemstellungen. Es beeinhaltet alle notwendigen
Lösungsalgorithmen und spart daher Zeit beim Aufbau des Berechnungsmodells.
Ausserdem reduziert die Verwendung die Fehleranfälligkeit bei der Programmierung.
Um eine Problemstellung in Fluent zu definieren, ist es zuerst notwendig, die Geometrie
und das Berechnungsgitter zu definieren. Zu diesem Zweck steht das Programm Gambit
im Programmpacket Fluent zur Verfügung. Da die Geometrieerstellung und das
Vernetzen zeitaufändig sind, werden diese Schritte auomatisiert.
Das so erstellte Berechnungsgitter wird zum Fluent Löser transferriert. Um die
gekoppelten Impuls-, Masse- und Energieerhaltungsgleichungen zu lösen, müssen die
Bedingungen an den Rändern bekannt sein. Diese Bedingungen sind
Benutzereingaben. Im vorliegenden Fall sind dies der Wärmeeintrag in den Pegel und
der Druck am Eintritt und Austritt. Diese Bedingungen sind in Abbildung 1 verdeutlicht.
Um Rechenzeit zu sparen wird ein Viertel des rotationssymmetrischen Pegels modelliert.
MyCatalog
An den Schnitten werden Symmetrierandbedingungen angesetzt.
Abbildung 1 Geometrie und notwendige Randbedingungen des stationären Modells
2.2. Verwendete Randbedingungen
Um die Strömungsregion (d.h. die Gleichungen zur Massen- und Impulserhaltung) zu
definieren, müssen die Drücke am Eintritt und Austritt der Berechnungsgeometrie
gesetzt werden. Der Auslass ist im Modell der Auslass des Pegels. Der Eintritt ist als
Anfang des Kühlrohrs definiert.
Die Energieerhaltungsgleichung benötigt Randbedingungen für den Wärmeeintrag auf
allen Aussenflächen des Pegels und zusätzlich die Eintrittstemperatur der Luft.
2.2.1. Massen- und Impulserhaltung
Wie oben beschrieben, müssen die Drücke am Ein- und Austritt definiert werden. Am
Austritt wird angenommen, dass der statische Druck null ist. Das Problem mit dem
Eintrittsdruck ist, dass nur der Druck am Ventil bekannt ist. Um das Rechenmodell auf
eine handhabbare Grösse zu beschränken, fängt die Rechnung aber erst am
Kühlrohreintritt an. Daher muss der Drucklust bestimmt werden, der auf dem Weg von
Ventil zu Kühlrohreintritt abfällt. Der Druck am Kühlrohreintritt ist dann der Ventildruck
verringert um diesen Druckverlust.
Um den Druckverlust zu bestimmen wurden zwei Messreihen durchgeführt. In beiden
Fällen wurde ein Drucktank (V=1.5m³, pmax = 5bar) verwendet, um einen
Pegelmechanismus mit Luft zu versorgen. Dabei wurde der Massenstrom gemessen. Im
ersten Experiment wurden eine typische Pegel/Kühlrohr Anordung montiert. Im zweiten
Experiment wurde nur ein Pegel montiert. Der Druckverlust wurde nun wie folgt ermittelt:
Bei einem bekannten Ventildruck wird der Massenstrom durch das Gesamtsystem
(Mechanismus, Pegel, Kühlrohr) aus dem ersten Experiment bestimt. Mit diesem
Massenstrom kann jetzt aus dem zweiten Experiment der Druckverlust durch den
Mechanismus abgeschätzt werden. Dieses wird für verschiedene Ventildrücke
wiederholt. Damit ergibt sich eine Auftragung von Massenstrom gegenüber Druckverlust,
die in Fluent durch eine User Defined Function als Randbedingung implementiert wird.
2.2.2. Energieerhaltung
Um die Energieerhaltungsgleichungen zu lösen, müssen die Wärmeeintrage an den
Grenzflächen definiert sein. Dieses sind vor allem der Wärmeeintrag des Glases an den
Pegel und die Eintrittstemperatur der Luft.
Für die Lufttemperatur wird in den Simulationen typischerweise ein Wert von 40°C
angenommen. Dieses stellt eine leichte Erwärmung der Luft im Mechanismus in
Rechnung. Die Austrittstemperatur der Luft ergibt sich als Ausgabegrösse des
Rechenmodells.
Der Wärmeeintrag des Glases an den Pegel an den Kontaktfächen hängt von der
Kontaktzeit von Glas und Pegel und von den jeweiligen Temperaturen ab. In früheren
internen Emhart Glass Studien wurde die folgende Gleichung gefunden, die den
Wärmeübergang von Glas an die Form ausreichend gut wiedergibt. Da die Bestimmung
von Wärmeübertragungsmessungen den Rahmen des IPGR Projektes gesprent hätten,
wird hier angenommen das die Gleichungen auf den Glas/Pegel Kontakt übertragbar
sind.
Gleichung 1
mit
1241
glasstec
glasstec
MyCatalog
Q Übertragene Wärme [J]
Tgob Tropfentemperatur [°C]
Tplunger Pegeltemperatur [°C]
tcontact Kontaktzeit von Pegel und Glas [s]
C1, C2 Konstanten
Um eine stationäre Rechnung durchzuführen muss der Wärmeeintrag auf die Kühlzeit
bezogen werden. Die Heizleistung des Glases beträgt somit:
Gleichung 2
Mit den Gleichungen 1 und 2 kann die Wärmelast des Pegels bestimmt werden, wenn
die Kontaktzeit bekannt ist. Die Konatktzeit hängt wiederum von der Position auf dem
Pegel ab. Abbildung 2 zeigt ein gemessenes, typisches Bewegungsprofil für eine 33cl
Bierflasche. Die Pegelspitze hat die längste Kontaktzeit. Danach bewegt sich der Pegel
aufwärts und der obere konische Punkt bekommt Glaskontakt. Der Pegel bewegt sich
weiter aufwärts, bis er im unteren konsichen Punkt stehen bleibt.
Abbildung 2: Gemessenes Bewegungsprofil des Pegels für eine 33cl Flasche
Zur korrekten Bestimmung des Wärmeeintrags ist es also notwendig, das
Bewegungsprofil für jeden Pegel/Behälter zu messen. Dies ist in der Praxis zu
aufwändig. Daher wird im Modell das in Abbildung 2 dargestellte Bewegungsprofil
verwendet. Für Berechnungen von grösseren Behältern (=längere Pegel) wird es leicht
angepasst.
Um das Begungsprofil auf andere Behälter zu übertragen, werden die Kontaktzeiten auf
die Gesamtkontaktzeit bezogen. Das Verhältnis für die oben beschrieben
charakteristischen Punkte ergibt sich dann gemäss Abbildung 3.
Abbildung 3 Realative Kontaktzeiten der charakteristischen Punkte
Die Kontaktzeiten für die charakteristischen Punkte lassen sich dementsprechend für
unterschiedliche Behälter bestimmen, indem man die Verhältnisse mit der jeweiligen
Gesamtkontaktzeit multipliziert. Die Gesamtkontaktzeit wiederum ergibt sich aus den
existierenden Maschineneintsellungen für den individuellen Behälter.
Mit diesen Information lässt sich der lokale Wärmeeintrag in den Pegel bestimmen.
Gleichung 1 und 2 werden zu:
Gleichung 3
Gleichung 4
Zur Vereinfachung der Berechnung wird angenommen, dass das Bewegungsprofil linear
verläuft. Unter dieser Annahme ist es möglich zwischen oberem und unterem
Kontaktpunkt zu interpolieren. Die lokale Kontaktzeit wird eine Funktion der
Kontaktzeiten des oberen und unteren Kontaktpunktes und der Pegellänge l. Auf der
Pegelspitze wird kein Profil angenommen. Die sich daraus ergebenden Gleichungen
sind in Abbildung 4 zusammengestellt. Für alle Oberflächen, die keinen Glaskontakt
haben, werden adiabate Bedingungen gesetzt, d.h. keine Wärme wird herein oder
hinaus transportiert.
Abbildung 4 Übersicht der verwendeten Randbedigungen auf der Pegeloberfläche
3. Validierung des Modells
Zur Validierung des Modells wurden Versuche durchgeführt. Der Massenstrom durch
verschiedene Designs der IPGR Mitglieder würde zur Verifizierung des
Strömungsmodells verwendet. Das thermische Modell wurde durch Abkühlmessungen
MyCatalog
eines aufgeheizten Pegels validiert.
3.1. Validierung des Strömungsmodells
In einer Laboreinrichtung wurde der Massenstrom durch verschiedene
Pegel/Kühlrohranordnungen mittles eines Massenstrommessers bestimmt. Druckluft wird
über eine 0.1m lange flexible Leitung gemäss Abbildung 5 zugeführt. Das
Strömungsmodell wird durch den Vergleich des gemessenen und berechneten
Massenstrom validiert. Als Annahmen für die Modellrechnung wurden folgende
Annahmen getroffen:
Stationärer Zustand
Kompressible Strömung
Temperaturabhängige Stoffwerte der Luft
Experimente bei einem Druck von 20psi wurden zum Vergleich herangezogen.
Abbildung 5 vergleicht diese Messungen mit den Simulationen. Für die fünf untersuchten
Anordnungen ergibt sich eine sehr gute Übereinstimmung.
Abbildung 5 Messprinzip im Labor und Ergebnisse der Massenstrommessungen
3.2. Validierung des thermischen Modells
Das Prinzip bei der Validierung des thermischen Modells ist einen Pegel, der auf einer
Drehbank eingespannt ist, mit einer Induktionsspule gleichmässig aufzuwärmen. Nach
dem Aufwärmen wird die Temperaturänderung der Pegeloberfläche bei eingeschalteter
Kühlung mit einer Thermokamera aufgenommen. Zur Erhöhung der Genauigkeit wurde
der Pegel mit einem Lack definierter Emmisivität eingesprüht. Abbildung 6 zeigt den
verwendeten Versuchsaufbau.
Abbildung 6 Versuchsaufbau der thermischen Validierungstests
Leider konnte die Kamera nicht an den Computer angeschlossen werden, so dass keine
kontuierliche Abkühlkurve aufgenommen werden konnte. Der Massenstrommesser
konnte die Zeitabhängigkeit auch nicht aufnehmen. Allerdings konnte die zeitliche
Veränderung der Luftaustrittstemperatur mit einem schnellansprechenden Typ K
Thermoelement aufgenommen werden. Diese Messung ermöglicht die Validierung des
thermischen Modells.
Auf der Modellseite wurde eine instationäre Rechnung durchgeführt. Wie bei der
Strömungsvalidierung wurde eine kompressible Strömung mit temperaturabhängigen
Stoffwerten der Luft angenommen. Als Startbedingung wurde eine gleichmässige
Pegeltemperatur angesetzt. Der Wert entspricht dem mit der Kamera gemessenen.
Abbildung 7 verdeutlicht den Vergleich von Messung und Simulation. Die Ergebnisse
zeigen, dass eine konstante Wärmekapazität des Pegelmaterials die Messwerte nicht
wiedergeben kann. Unter Annahme einer temperaturabhängigen Wärmeleitfähigkeit
ergeben sich sehr gute Übereinstimmungen von Theorie und Praxis.
Abbildung 7 Vergleich der Abkühlmessung mit Simulationen
4. Ergebnisse der Modellierung
Im Pegelkühlungsprojekt der IPGR war der erste Schritt ein Vergleich der von den
Mitgliedern verwendeten Pegeldesigns. In einem zweiten Schritt wurde ein Design für
eine Parameterstudie ausgewählt. Meherere Einflussparameter wurden variiert, während
andere konstant gehalten wurden. Um Interaktionen der Parameter zu finden und den
Einfluss zu quantifizieren, wurde die statistische Methode des Design of Experiment
(DOE) in einem dritten Schritt verwendet. In diesem Artikel wird nur auf einige
1242
glasstec
glasstec
MyCatalog
Ergebnisse des DOE eingegangen.
4.1.1. Aufbau des DOE
Die Methode des DOE basiert auf sogenannten faktoriellen Designs. Das heist, dass
zwei oder mehrere Faktoren simultan variiert werden. Jedem Faktor wird ein Plus-(+1)
und ein Minus(-1) Niveau zugeordnet. Die Auswertung eines DOE ist die Bestimmung
von sogenanten Effekten. Es wird zwischen Haupteffekten und Wechselwirkungen
unterschieden.
Der Haupteffekt von z.B. Faktor A zeigt an, welche Änderung eine Antwortvariable
erfährt, wenn der Faktor A von seinem Minus zum Plus Niveau verändert wird. Eine
Wechselwirkung bezeichnet die Änderung der Antwortvariable bei simulataner ànderung
zweier Faktoren. Die Antwortvariable ist eine messbare Grösse, die den Prozess
charakterisiert. Im Fall der Pegelkühlung wurden folgende Antwortvariablen verwendet:
Massenstrom durch die Anordnung [g/s]
Gesamter Wärmeentzug durch die Kühlluft [J]
Mittlere Temperatur im konischen Teil der Pegeloberfläche [°C]
Mittlere Temperatur im Bereich der Pegelspitze [°C]
Minimale Temperatur im konischen Teil der Pegeloberfläche [°C]
Maximale Temperatur im konischen Teil der Pegeloberfläche [°C]
Temperaturdifferenz auf dem konischen Teil der Pegeloberfläche [°C]
Der Massenstrom und der Wärmeentzug sind ein Mass für die Kühlkapazität. Die
mittlere Temperatur im konischen Teil und an der Spitze geben Aufschluss darüber, wie
die Kühlung lokal in diesen Bereichen wirkt. Die minimalen, maximalen Temperaturen
und die Differenz weisen auf die Gleichmässigkeit der Temperaturverteilung im
konischen Bereich hin.
Es wird ein faktorielles 25-1 Design verwendet und mit der kommerziellen Software
MiniTab ausgewertet. Mit diesem Design können Haupteffekte und Wechselwirkungen
zweiter Ordnung für fünf Faktoren bestimmt werden. Dabei werden folgende Faktoren
ausgewählt, die in der vorherigen Parameterstudie den grössten Einfluss zeigten.
Gesamtdruck am Eintritt
Kühlzeit
Wärmeleitfähigkeit des Pegelmaterials
Durchmesser der Bohrung an der Spitze des Kühlrohrs
Summe der Fläche der Bohrungen im Kühlrohr
Ein weiterer wichtiger Faktor bezüglich der Temperaturverteilung ist der Wärmeeintrag in
den Pegel. Dieser ist wiederum durch das Bewegungsprofil beeinflusst. Wie oben
beschrieben wurde ein Bewegungsprofil angenommen. Um den Einfluss des
Bewegungsprofils auf die Ergebnisse des DOE abzuschätzen, werden zwei weitere
Profile analysiert. Es wird angenommen, dass die Bewegungszeit zwischen den
charakteristischen Punkten um 25% länger (langsame Bewegung) bzw. kürzer (schnelle
Bewegung) wird.
4.1.2. Ergebnisse des Design of Experiment
Die Ergebnisse werden in Pareto Diagrammen für das Standardprofil dargestellt. Die
farbigen Sterne in den Diagrammen zeigen die Ergebnisse für das schnelle und
langsame Bewegungsprofil. Die + und - Zeichen heissen, dass der Wert der
Antwortvariable bei einer Veränderung des Faktors vom Minus zum Plus Niveau
MyCatalog
steigt(+) oder sinkt (-). Die rote Linie markiert das Signifikanzniveau. D.h. das
Haupteffekte und Wechselwirkungen mit geringen Effekten als dieser Linie mit einer 95%
Wahrscheinlichkeit keinen Einfluss auf die Antwortvariable haben.
Generell zeigt der Vergleich der verschiedenen Bewegungsprofile, dass für alle
Bewegungsprofile und Antwortvariablen die gleichen Effekte einen signifikanten Einfluss
haben.
Aus Abbildung 8 wird deutlich, dass der Wärmeentzug signifikant durch den
Eintrittsdruck, die Kühlzeit, die Bohrungsfläche und die Wärmeleitfähigkeit beeinflusst
wird. Alle anderen Haupteffekte und Wechselwirkungen sind vernachlässigbar.
Abbildung 8 Pareto Diagramme für die Kühlkapazität
Bei höheren Drücken und grösseren Bohrungsflächen wird ein grösserer Massenstrom
durch die Anordnung transportiert. Das führt zu einer grösseren Kühlkapazität. Wird die
Kühlzeit verlängert, wird der gleiche Massenstrom für eine längere Zeit gefördert und
somit auch mehr Wärme entzogen. Ist die Wärmeleitfähigkeit des Materials höher, wird
die Wärme schneller zur Grenzfäche von Luft und Pegel transportiert und mehr Wärme
wird entzogen.
Abbildung 9 zeigt, dass die mittlere konische Temperatur von denselben Faktoren
beeinflusst ist, wie der Wärmeentzug. Die mittlere konische Temperatur und der
Wärmeentzug sind stark miteinander verbunden, da im konischen Bereich die meiste
Wärme entzogen wird.
Abbildung 9 Pareto Diagramme für die mittleren Temperaturen
Das Pareto Diagramm für die mittlere Temperatur im Bereich der Pegelspitze in
Abbildung 9 verdeutlicht, dass nur der Eintrittsdruckk und die Kühlzeit die Temperatur
der Spitze signifikant verändern, da eine Änderung der Bohrungsfläche nur einen
geringen Einfluss auf den Massenstrom durch die Bohrung an der Spitze hat. Daher wird
auch der Wärmeentzug und damit die Temperatur nicht beeinflusst. Weiterhin ist der
Einfluss einer höheren Wärmeleitung geringer als bei der konischen Temperatur, da die
Pegelspitze länger in Kontakt mit dem Glas und die Übertragungsfläche kleiner ist.
Die Einflussfaktoren für die Temperaturverteilung auf dem konischen Teil (minimale und
maximale Temperatur, Temperaturdifferenz) entsprechen denen für den Wärmeentzug.
Die Bohrungsfläche hat einen grösseren Einfluss, da sie die Massenstromverteilung
entlang des Kühlrohrs verändert.
5. Feldmessungen als Praxistest des Modells
Mit dem oben beschriebenen validierten Modell wurde ein Design weiter analysiert.
Basierend auf den Erfahrungen der Parameterstudie und de DOE Ergebnissen wurde
ein optimiertes Design vorgeschlagen. In Feldversuchen wurden die Vorhersagen unter
Realbedingungen überprüft.
5.1. Vorhersagen des Modells
Als erster Schritt wurde die Temperaturverteilung des existierenden Designs (=Standard)
bestimmt. Durch Vorsehen von zusätzlichen Bohrungen im Kühlrohr und Änderung der
Pegelinnenkontur konnte der Massenstrom von 10.6g/s auf 13 g/s für ein optimiertes
Design gesteigert werden. Diese Steigerung resultiert in einer um 130°C geringeren
Maximaltemperatur, wie Abbildung 10 verdeutlicht. Mit diesem optimierten Design ist
möglich den Druck zu senken und somit Energie zu sparen. Abbildung 10 zeigt, dass bei
einem auf 1.5 bar reduzierten Druck die Temperatur immer noch 25°C tiefer ist. Die
1243
glasstec
glasstec
MyCatalog
Änderung von 2.8bar auf 1.5bar resultiert also in einer um etwa 105°C höheren
Temperatur.
Standard bei p= 2.8bar Optimiert bei p= 2.8bar Optimiert bei p = 1.5bar
Abbildung 10 Ergebnisse der Optimierung
5.2. Versuchsaufbau
Um die Aussagen des Modells zu überprüfen, müssen der Massenstrom und die
Pegeltemperatur im Feld bestimmt werden. Die Temperatur wird mit einem Pyrometer
bestimmt (Abbildung 11). Dieses Pyrometer erlaubt eine Punktmessung auf der
sichtbaren Fläche des Pegels, während die Form geöffnet ist. In das Pyromter ist eine
Kamera integriert, um den Messbereich zu erkennen. Das rechte Bild in Abbildung 11
verdeutlicht, dass der Messpunkt sich etwa 2mm unterhalb der Pegelspitze befindet. Der
Emmisionskoeffizient wurde auf 0.9 gesetzt. Dieses beeinflusst den Absolutwert, aber
nicht die relativen Änderungen. Daher spielt er für die Messungen hier eine
untergeordnete Rolle. Leider war es mit der Versuchsanordnung nicht möglich eine
Temperaturverteilung zu bestimmen. Daher können die Modellaussagen diesbezüglich
nicht validiert werden.
Der Massenstrom wurde mit einem Venturirohr bestimmt, das zwischen Ventil und
Maschine eingebaut wurde.
Abbildung 11 Pyrometermessungen in der Glashütte
5.3. Temperaturmessungen
Abbildung 12 stellt die Temperaturmessung für das Standard Design dar. Es zeigt die
Temperatur in Abhängigkeit von der Zeit. Zur Analyse der Temperaturmessungen ist es
notwendig, einen Referenzpunkt auszuwählen. Als Referenzpunkt wird das Ende der
Kühlzeit gewählt, wie in Abbildung 12 markiert. Wenn der Pegelbetrieb im thermischen
Gleichgewicht ist, ist diese Temperatur über die Zyklen konstant. Daher wird sie im
folgenden als stationäre Referenztemperatur bezeichnet.
Abbildung 12 Temperaturmessung für den Standard
Diese beträgt für das Standard Design etwa 470°C. Der Druck am Venturirohr betrug 2.8
bar. Die Kühlung war von 65-290° an .
Die linke Seite von Abbildung 13 zeigt die Temperatur für das optimierte Design mit
derselben Kühlzeit (65-290°) wie das Standard Design. Die resultierende stationäre
Referenztemperatur beträgt etwa 310°C, d.h. 160°C weniger als für das Standard
Design. Dieses ist in guter Übereinstimmung mit den Modellvorhersagen von 140°C.
Diese Verbesserung der Kühlkapazität aufgrund des höheren Massenstroms lässt sich
wie oben erwähnt in eine Verringerung des Druckes und eine Energieersparnis
umsetzen. Daher wurden in weiteren Versuchen der Druck und die Kühlzeit verringert,
um das Energieeinsparungspotential zu bestimmen.
Aus Abbildung 13 wird deutlich, dass bei einer Reduktion der Kühlzeit von 65-210° (d.h.
um 35%) die stationäre Referenztemperatur auf 430°C steigt. Dieses liegt im Bereich
des Standard Designs. Wenn der Druck auf 1.6bar reduziert und die Kühlzeit auf dem
ursprünglichen Niveau gehalten wird, wird eine stationäre Referenztemperatur von
440°C erreicht, wie Abbildung 14 zeigt. Der Anstieg von 130°C bei einer Druckänderung
von 2.8 auf 1.6bar bestätigt die Modellvorhersage von 105°C bei einer ähnlichen
Druckänderung.
MyCatalog
Der gemessene Massenstrom für das optimierte Design bei 1.6bar ist 12.2g/s, für das
Standard Design 10.8g/s bei 2.8 bar. Um die Energieeinsparung abzuschätzen wird
folgende lineare Abhängikeit des Energieverbrauchs angenommen:
Unter dieser Annahme ist mit dem optimierten Design 35% weniger Energie nötig, um
die gleiche Kühlkapazität (d.h. die gleiche stationäre Referenztemperatur) zu erreichen
wie mit dem Standard Design.
Abbildung 13 Einfluss der Änderung der Kühlzeit mit optimierter Anordnung
Abbildung 14 Einfluss der Änderung des Drucks mit optimierter Anordnung
6. Zusammenfassung
Es wurde ein stationäres Modell zur Beschreibung der Strömungs- und
Temperaturverteilung in Pegel/Kühlrohr Anordnungen für die Hohlglasindustrie
entwickelt. Dieses Modell basiert dem kommerziellen CFD (Computational Fluid
Dynamics) Software Packet Fluent. Die notwendigen Randbedingungen zur
Beschreibung der gekoppelten Impuls- Masse- und Energieerhaltungsgleichungen
wurden definiert und deren Gültigkeit in Labormessungen validiert.
Mit diesem Modell wurden Parameterstudien und Vergleiche unterschiedlicher Designs
durchgeführt. Anschliessend wurde die Design of Experiment Methode angewandt, um
entscheidende Einflussfaktoren miteinander zu vergleichen und Wechselwirkungen unter
ihnen zu identifizieren. Der Massenstrom durch die Anordnung und die Kühlkapazität
sind stark miteinander verknüpft. Der Massenstrom und die Kühlkapazität sind
hauptsächlich von der Kühlzeit, dem Eintrittsdruck und der Bohrungsfläche im Kühlrohr
beeinflusst.
Die Anwendbarkeit des Modells wurde in Feldtests bestätigt. Die Voraussagen der
Verbesserungen hinsichtlich Massenstrom und Temperatur bei Verwenduing eines
optimierten Designs trafen gut zu. Gegenüber dem bisher verwendeten Design konnte
mit dem optimierten Design eine Temperaturreduktion von 160°C erzielt werden. Dieses
konnte in eine 35% Energieersparnis umgemünzt werden. Falls die Pegelkühlung
limitierend ist, kann die erhöhte Kühlkapazität auch zu einer Geschwindigkeitssteigerung
genutzt werden.
Danksagung
Die Arbeit entstand im Rahmen eines von den International Partners in Glass Research
(www.ipgr.com) finanzierten Projektes. Ich möchte allen IPGR Mitgliedern für ihre
Mitarbeit und Hilfe danken. Ein spezieller Dank geht an David Braithwaite für die
1244
glasstec
glasstec
MyCatalog
Mehr Informationen
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
MyCatalog
As a global glass container supplier at the forefront of new manufacturing techniques,
Wiegand-Glas a long-time partner of Emhart Glass embraced Emhart Inex s MiniLab
glass container measurement technology shortly after its introduction. After purchasing
10 systems for its global manufacturing facilities, Wiegand recently ordered four
additional systems for its manufacturing plants in Steinbach am Wald and
Grossbreitenbach in Germany.
The MiniLab offers a new approach to automated glass container sampling with
significant production benefits, providing quantitative measurement data and replacing
mechanical go-no-go measuring techniques with a non-contact, camera-based platform
that tests more parameters at higher speeds and achieves good process stability.
HANDS-OFF AUTOMATION
Offering a selection of over 400 glass bottle styles, from traditional wine and beer to
non-rounds and ovals, Wiegand-Glas also manufactures highly customised ware and
glass containers with decorative coatings. The company s modern manufacturing plants
are completely automated from hot end to cold end. The main human involvement is
found in the control rooms where technicians monitor the production process.
The MiniLab system fits our production style of hands-off automation, explained Oliver
Wiegand, managing director of Wiegand-Glas. It accepts bottles as they exit the lehr
and performs all tests without human intervention. We receive data from the cold end
inspection equipment in real time, allowing us to react immediately if container
specifications do not meet set standards.
COMPLETE SAMPLING SOLUTION
The MiniLab is a complete sampling solution that can handle two different containers
simultaneously, providing automatic operation, simplified setup and low maintenance.
The system has several components: Isis provides external dimensional gauging,
pushup height, corkage and weight measurements, the Finish Profile Gauge option for
the Isis measures the very small flange and knockout defects near the sealing surface of
the bottle, and the MiniLab Pressure Plus measures the container s maximum internal
pressure strength and fill-point capacity.
Our previous system did not conduct capacity testing, which is an important component
of the MiniLab system, said Oliver Wiegand. Another benefit of this system is its
flexibility and quick changeover. The system provides reproducible mould-correlated
data for the required measurements (see diagrams).
INSPECTING ALL STYLES
The standard system inspects all of the plant s glass styles: flint, amber and green glass
in oval, square, rectangular, round and special shapes. We were looking for a vendor to
supply a complete inspection solution, and the Emhart Inex MiniLab provided all the
components to meet our application, said Wiegand. The MiniLab system uses high
resolution cameras, precision optics, intelligent sensors and advanced container
handling techniques, and the data interface package outputs cavity-correlated
measurements to standard plant management software.
1245
glasstec
glasstec
MyCatalog
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
MyCatalog
1. Introduction
An important step in the hollow glass forming process is the pressing of glass with a so
called plunger. As the plunger is in direct contact with the about 1100°C hot glass, it is
exposed to a significant heat input and therefore has to be cooled to avoid sticking of the
glass. In practice the cooling is done with air, which is fed to plunger inside by a bored
cooling tube (cooler).
This study describes the development and validation of a 3D model that predicts the flow
and temperature distribution in plunger and cooler set-ups. With this tool the governing
parameters for the plunger/cooler set-up are determined. The work was done as an
IPGR (International Partners in Glass research) project. The IPGR is a worldwide
research consortium of today seven glass plants. Besides very close co-operations in
benchmark projects, fundamental R & D projects are funded. The scope of the IPGR
project was to develop a steady state and transient model. In this report only the steady
state model is described.
As a first step of the model development the necessary boundary conditions are
formulated. These boundary conditions are implemented in the commercially available
CFD (Computational Fluid Dynamics) Code Fluent that allows solving the coupled
momentum and energy conservation equations. In trials the assumed boundary
conditions are validated and verified.
With the validated model the most important parameters influencing the temperature and
flow distribution are identified using the Design of experiment method. Based on this
experience predictions and optimisation recommendations for a plunger and cooler
design were generated and compared to measurements in field trials.
2. Calculation model
2.1. General calculation procedure
As stated above the model bases on the commercially available CFD (Computational
Fluid Dynamics) Code Fluent. This code is a general-purpose solver to solve coupled
thermal and fluid dynamics problems. It incorporates all the necessary solution
algorithms and therefore saves time in setting up the calculation model. Furthermore it
reduces the risk of faulty programming significantly.
In order to set up a problem with Fluent it is first of all necessary to define the geometry
and the calculation grid. For this purpose a special program that is part of FLUENT
called Gambit is used. It allows defining the geometry and after that meshes this
geometry model. As the geometry creation and the meshing is a time consuming step
the geometry creation is automised.
This calculation model is transferred to the FLUENT solver. In order to solve the coupled
equations of momentum (Navier-Stokes), mass and energy conservation it is necessary
to know the conditions on the boundaries of the calculation model. These conditions
have to be specified by the user. Basically these are the heat load on the plunger and
the pressure at inlet and outlet as illustrated by Figure 1. In order to save calculation time
only one quarter of the axis-symmetric geometry is used. At the cutting area symmetry
boundary conditions are applied.
Figure 1 Geometry and necessary boundary conditions for the steady state model
2.2. Used boundary conditions
1246
glasstec
glasstec
MyCatalog
In order to define the flow region (that means the equations for conservation of mass and
momentum) the pressure values at the inlet and outlet of the calculation model have to
be set. In the model the outlet is located at the outlet of the plunger. The inlet is
determined to be the inlet of the cooling tube.
The conservation equation of energy needs boundary conditions for heat input at all
outer surfaces.
2.2.1. Mass and Momentum
As described above the pressure condition at the inlet and outlet have to be set. On the
outlet it is assumed that the static pressure equals the ambient pressure.
The problem with the inlet pressure is that only the pressure at the valve is known. In
order to reduce the model to a manageable size, the calculation starts at the entrance of
the cooler. Therefore the pressure drop between the valve and the entrance of the cooler
has to be determined. The pressure at the cooling tube entrance is then the pressure at
the valve reduced by the pressure drop.
In order to determine the pressure drop between valve and cooling tube two
measurements were conducted. In both cases a pressure tank (pmax = 5bar) with a
capacity of 1.5m³ was used to supply a plunger mechanism with air. The mass flow
through the system was monitored. In the first experiment plunger and cooler were
mounted, whereas in the second only a plunger was installed. For the measurements a
typical plunger and cooler set-up was used.
The pressure drop can be determined as follows: With the known pressure at the valve
the air flow through the entire system (Mechanism, plunger and cooler) can be
determined from the first experiment. With this airflow, the pressure loss through the
mechanism can be deduced from the second experiment. This was done for various air
flows. The mass flow vs pressure drop characteristic was implemented in FLUENT via a
User defined function.
2.2.2. Energy
In order to solve the conservation equation for the energy it is necessary to know what
the heat input and output out of the system is. Therefore the thermal conditions on every
surface of the model have to be specified.
For the air inlet temperature a value of 40°C is assumed. This accounts for the warming
of the air on its way through the mechanism. The outlet temperature is automatically
calculated by FLUENT depending on all the given equations and boundary conditions.
The heat input on the plunger surface that is in contact with the glass depends on the
contact time of plunger and glass. In former experimental investigations done by Emhart
MyCatalog
Glass the following equation fitted the heat input from glass to a blank mould very good.
As a measurement of the heat transferred from glass to plunger is very complex for this
study it is assumed that the results obtained from the blank mould / glass contact can be
transferred to the plunger / glass contact situation. The following equation applies.
Equation 1
with
Q Transferred heat [J]
Tgob Temperature of gob [°C]
Tplunger Plunger temperature [°C]
tcontact Contact time of glass and mould [s]
C1, C2 Constants
In order to reduce the necessary calculation time a steady state examination is done.
Therefore the transferred heat has to be referred to the time the cooling is applied
(tcool). The heating power of the glass then equals:
Equation 2
With equation 1 and 2 the heat load on the plunger can be determined if the contact time
is known. The contact time depends on the location. Figure 2 shows a typical measured
motion profile for a plunger used for 33cl beer bottle. The plunger tip has the longest
contact time. Later the plunger begins to move upwards and the upper point of the conic
part comes into contact. After that the lower point of the conic part and small parts of the
cylindrical part come into contact until the plunger is retracted.
Figure 2: Measured motion profile of the plunger for a 33cl bottle
For a correct determination of the heat load on the plunger it would be necessary to
measure this motion profile for every container. As this is costly (both money and time
wise) the motion profile shown in Figure 2 is used for all container examined in this
study.
In order to transfer the motion profile to another container the contact times are referred
to the overall contact time . The fraction obtained for the three characteristic points
plunger tip in contact, upper conic point in contact and lower conic point in contact is
shown in Figure 3.
1247
glasstec
glasstec
MyCatalog
Figure 3 Contact time fractions for characteristic points using measured motion profile
The contact times for the characteristic points of a different container can now be
calculated by multiplying the above obtained fraction with the overall contact time. The
overall plunger contact time in return can be calculated from the machine settings
depending on the individual job.
With this information the localised heat input on the plunger can be calculated. Equation
1 and 2 become:
Equation 3
Equation 4
In order to further simplify the calculation it is assumed that the motion profile is linear.
Under this assumption it is possible to interpolate between the high and low conic
contact points. The local contact time becomes a function of the contact time of the high
and the low contact point and the length of the plunger. No profile is assumed on the
plunger tip. This correlation is illustrated in Figure 4. All surfaces not in contact with the
glass are assumed to have a zero heat flux. That means that no heat is transported into
the plunger, nor heat is lost.
Figure 4 Summarised boundary conditions on the plunger surface
3. Model validation
For the validation of the above-described models verification trails were performed. The
mass flow through the investigated designs is determined to verify the flow part of the
model. The thermal model was validated by monitoring the cooling of a preheated
plunger.
3.1. Flow model validation
A laboratory test rig was used in which the mass flow through the plunger/cooler set-up
was determined with a flow meter. Pressurized air is supplied via a 0.1m long flexible
tube (see Figure 5).
The flow model is verified by comparing the measured overall mass flow through the
different plunger/cooler assemblies with calculated values. The following assumptions
are made for the calculations:
steady state
compressible air flow
MyCatalog
temperature dependent air properties
Lab experiments at 20psi are used for validation purposes. Figure 5 compares the
measured with the calculated values. For the five measurements the agreement between
measured and calculated values is very good.
Figure 5 Measurement principle in lab and mass flow results
3.2. Thermal model validation
The thermal model cannot be validated with the above-described set-up. The idea of the
validation measurements is to heat up the plunger with an induction coil on a lathe. After
the plunger is heated up uniformly the temperature change on the plunger surface is
continuously measured with a thermal area camera. In order to minimise the
measurement uncertainties, the plunger surface is sprayed with a high temperature
resistant finish in order to get a defined emissivity. Figure 6 shows the experimental
set-up.
Figure 6 Experimental set-up for thermal model verification trails
Unfortunately the camera could not be successfully connected to a computer, so that no
monitoring of the thermal process could be obtained. The mass flow measurement
device could not monitor the time dependence either. Nevertheless the air outlet
temperature could be monitored over time using a type K thermocouple placed in one of
the outlet bores. This time dependent measurement gives the chance to validate the
model against the measurement.
For the modelling a transient calculation is performed. As for the flow model calculations
a compressible air flow and temperature dependent properties are used for the air. As
start condition a uniform temperature of the heated part of the plunger is assumed. The
start temperature is set to the value measured with the area camera.
Figure 7 shows the comparison of measurement and calculation
The calculations show that the heat capacity of the material is very important. Assuming
a constant heat capacity for the plunger the experimental data could not be reproduced
by the model. Using a temperature dependent heat capacity the model is in very good
agreement with the measurements.
Figure 7 Comparison of transient behaviour
4. Modelling results
1248
glasstec
glasstec
MyCatalog
In the plunger cooling project in a first step all the plunger/cooler set-ups supplied by the
IPGR members were compared against each other. In a second step one of the designs
was chosen to perform a parametric study. Several influencing parameters were varied,
while keeping the others constant. In order to identify interactions and quantify the effect
of the parameters a statistical method called Design of Experiment (DOE) is used in a
third step. In this report only the results of the DOE are discussed.
4.1.1. DOE Set-up
The Design of Experiment method bases on factorial designs. This means that two or
more factors are varied simultaneously. Each factor is assigned a plus (+1) and a minus
(-1) level. The evaluation of these factorial designs is basically the determination of the
so-called effects. It is distinguished between main effects and interactions.
The main effect of a factor A (EA) shows, which change a response variable Z will take,
if the factor A is changed from its minus to its plus level. An interaction is the impact on a
response variable, which is caused by the simultaneous change of several factors. A
response variable is a measure that is characterising the process. In this case the
following response variables are used:
Overall mass flow [g/s]
Overall heat extraction [J]
Average Temperature on the conic part of the plunger surface [°C]
Average temperature on plunger tip surface [°C]
Minimum temperature on the conic part of the plunger surface [°C]
Maximum temperature on the conic part of the plunger surface [°C]
Temperature difference on the conic part of the plunger surface [°C]
The overall mass flow and the overall heat extraction are a measure how high the
cooling capacity is. The average temperatures on the conic part and the tip specify how
effective the cooling in these areas is. The minimum, maximum and difference of the
temperatures on the conic part indicate the quality of the thermal distribution on the conic
part of the plunger.
In order to compare the influence from main effects and interactions on the response
variables Pareto charts are used. These summarise the main effects and the interactions
for the response variables.
A factorial 25-1 design is used and analysed using the commercial software MiniTab.
MyCatalog
This means that the effects and second order interactions for 5 factors can be
determined. The parameters that showed the biggest influence on the temperature in the
parametric study are chosen as follows
total inlet gauge pressure
cooling time
thermal conductivity of plunger material
diameter of tip hole
area of cooling holes
A further, very important factor in determining the temperature distribution is the heat
input on the plunger. The heat input is influenced by the motion profile. As described
above one motion profile was assumed for the study. In order to estimate what difference
a change in the motion profile makes, two other profiles are discussed for the base case
design. It is assumed that the motion time between the characteristic points of the profile
is 25% shorter (fast motion), respectively longer (slow motion).
4.1.2. Results of the DOE
The pareto charts represent the results for the standard motion profile. Coloured stars in
the charts indicate the results for the slow and fast motion profile. The + and - shown
in the bars of the Pareto chart indicate if the value of the response variable increases (+)
or decreases (-) if the factor is changed from its minus to plus level. The red lines
indicated in the Pareto chart mark a significance level. This means that main effects and
interactions with lower effect values as indicated by this line show within a 95%
probability no influence on the response variable.
Comparing the results for the different motion profiles it is obvious that for all motion
profiles and response variables the same effects show a significant influence. The
identification of the governing effects seems to be independent of the motion profile.
Figure 8 shows that the overall removed heat is significantly influenced by inlet pressure,
cooling time, hole area and the thermal conductivity of the plunger material. All other
main effects and interactions are not significant regarding the heat removal.
Figure 8 Pareto charts of response variables cooling capacity
With higher inlet pressures and hole areas the mass flow through the system increases.
This results in a higher cooling capacity. Increasing the cooling time means applying the
same mass flow for a longer time and therefore increasing the heat removed. With a
1249
glasstec
glasstec
MyCatalog
higher thermal conductivity more heat is removed as it is distributed better from the outer
surface to the inner surface of the plunger.
Figure 9 clarifies that the average conic temperature is significantly influenced by the
same effects as the removed heat. The average conic temperature and the removed
heat are close-linked as most heat is removed where the plunger is hottest and has the
highest surface area. The region this applies to is the conic part.
Figure 9 Pareto charts of response variables Average temperatures
The Pareto chart for the average tip temperature in Figure 9 illustrates that only the inlet
pressure and the cooling time influence the tip temperature. As the increase of the bore
area has a minor influence on the mass flow through the tip bore, the heat extraction and
thus the temperature is not influenced by a change in hole area. Furthermore the tip
region is too small and the contact time longer that the better heat distribution due to a
higher thermal conductivity has a significant influence on the tip temperature either.
The influencing effects for the temperature distribution on the conic part represented by
the minimum and maximum temperature and the temperature difference are the same as
for the heat removal. The hole area has a more significant influence as the mass flow
distribution along the cooler is influenced, when the hole area is changed.
5. In factory measurements to prove model applicability
Using the above developed and verified model one plunger/cooler design was further
analysed. Based on the experience of the parametric study and the DOE results an
optimised set-up was determined. The predictions were compared to measurement
data from field trials.
5.1. Model prediction
As a first step the temperature distribution of the current (= standard) set-up was
calculated. Applying more bores in the cooling tube and changing the inner contour of
the plunger, the mass flow throughput could be increased from 10.6g/s for the standard
to 13g/s for the optimised design. This results in a temperature reduction of 130°C in the
hottest region as can be seen from Figure 10. This reduction in return can be used for
decreasing the pressure, meaning saving energy. Figure 10 shows that at a pressure of
1.5 bar still 20°C lower temperatures are observed. Changing the pressure from 2.8bar
to 1.5bar results in a temperature increase of roughly 105°C.
Standard at p= 2.8bar Optimized at p= 2.8bar Optimzed at p = 1.5bar
Figure 10 Results of the optimisation
MyCatalog
5.2. Experimental set-up
In order to validate the model findings, the mass flow through the set-up and the plunger
temperature have to be measured. The temperature is measured with a pyrometer as
shown in Figure 11. This means that the temperature measurement is restricted to the
plunger area that is visible during the time the mould is open. An integrated camera
helps to adjusts the pyrometer measurement point. The right picture in Figure 11
illustrates that the temperature is measured about 2mm below the tip. The emission
coefficient is set to a value of 0.9. This value influences the absolute temperature value,
but as the analysis of the measured data is relative the value of the emission coefficient
has no meaning for the validation of the model. Unfortunately it is not possible with this
experimental set-up to determine the temperature distribution on the plunger surface.
This means that the modelling results concerning the equalisation of the temperature
profile cannot be verified.
For the mass flow measurement a Venturi-tube is mounted in the piping between valve
and machine.
Figure 11 Pyrometer measurements in the field
5.3. Temperature measurements
Figure 12 shows the temperature measurement for the standard set-up. It shows the
temperature over time assuming an emission coefficient of 0.9. For the analysis of the
temperature measurements it is necessary to pick one reference point of each cycle. The
reference point is chosen to be the point at the end of the cooling. It is marked in Figure
12. For the steady state of the plunger operation the temperature at this reference is
constant over the cycles. This temperature is therefore called the steady state reference
temperature in the following.
Figure 12 Temperature reading of standard set-up
According to Figure 12 the steady state reference temperature for the standard set-up is
about 470°C. The pressure measured at the Venturi tube was 2.8bar. The cooling was
turned on from 65-290° . Figure 13 shows the temperature response of the optimised
set-up (left part) with the same cooling time as for the standard set-up. The resulting
steady state reference temperature for the optimised set-up is approximately 310°C. This
corresponds to a temperature reduction of 160°C. This is well in accordance with the
model prediction of 140°C.
Every increase in cooling capacity due to increased mass flow can be used for a
reduction in either cooling time or pressure decrease. The pressure and the cooling time
are reduced till the same steady state reference temperature is reached as with the
original set-up.
1250
glasstec
glasstec
MyCatalog
If the cooling time is decreased to 65-210° (i.e. by 35%), the steady state reference
temperature rises to 430°C as indicated in Figure 13. This is in the range of the steady
state reference temperature for the standard set-up. If the pressure is decreased to
1.6bar while keeping the same cooling time the steady state reference temperature rises
to 440°C as shown in Figure 14. The temperature increase of 130°C when changing the
pressure from 2.8 to 1.6 bar, corresponds reasonable with the model prediction of
105°C.
The measured mass flow for the optimised set-up at 1.6bar is 12.2g/s, for the standard
set-up 10.8g/s at 2.8bar. In order to estimate the energy savings the following linear
dependence of the energy consumption is assumed:
Under this assumption about 35% less energy is needed with the optimised set-up to
provide the same cooling capacity (to reach the same the steady state reference
temperature respectively).
Figure 13 Temperature readings with optimised set-up changing the cooling time
Figure 14 Temperature readings with optimised set-up changing the inlet pressure
6. Summary
A steady state model to describe the flow and temperature distribution in plunger and
cooler set-ups for the hollow glass industry was developed. The model is based on the
commercially available CFD (Computational Fluid Dynamics) Code Fluent. The
necessary boundary conditions to describe the coupled conservation equations for
momentum, mass and energy are formulated and validated in laboratory experiments.
Applying the model parametric studies and design comparisons of existing designs were
done. Furthermore the model was used to determine the governing factors for the
plunger surface temperatures and identify interactions using the Design of Experiment
method. The mass flow and the cooling capacity are close-coupled. The mass flow and
the cooling capacity are mostly influenced by the cooling time, the pressure and the
summed cooler bore area.
The model applicability was proven in field trials with a 33cl beer container. The model
predictions regarding mass flow and temperature met the experimental results well. The
plunger temperature could be reduced by 160°C when using the proposed optimised
design, which in return can be used to save 35% energy for compressed air ot to speed
up the process if the plunger cooling is limiting.
Acknowledgement
MyCatalog
(www.ipgr.com). I like to thank the IPGR members for the collaboration and help, a
special thank you to David Braithwaite for the discussions and experimental work done
together.
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
The work was done as project funded by the International Partners in Glass Research
1251
glasstec
glasstec
MyCatalog
Emmeti S.p.A.
Address Via G.Galilei, 29
42027 Montecchio Emilia (Re)
Italy
Essemce AB
Address Maskinvägen 2
361 42 Lindås
Sweden
Telephone +39 0522 861911
Telephone +46 471 18680
Fax +39 0522 861912
Fax +46 471 18699
Internet Address www.emmeti-spa.it
Internet Address www.essemce.se
Booth Hall 13 B63
Booth Hall 13 D68
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
01.06.09 Spinning machines
PRODUCT DETAILS
PRODUCT DETAILS
Row preparation and Transfer Area
The essential component configures the layer of round containers
according to the preset palletization pattern. It can be push-type. with
liftable guides, or grip-type, operating with pneumatic grippers. The
push-operating version can treat up to 7 rows at a time, at a speed of 8
cycles per minute.
The stacker can also be equipped with devices to allow layer formation to
cope with horizontal strapping. Special equipment is also available for the
treatment of non cylindrical containers (square, rectangular, oval,
triangular).-
SHEARS
All shears, except GS-4, can be supplied with normal (N) or small (S)
handles.
Size "N" with yellow coating and "S" with red.
Handle Shears type GS.
Blade length Handle length
GS-1N 75 mm 155 mm
GS-1S 85 mm 135 mm
GS-2N 85 mm 170 mm
GS-2S 85 mm 140 mm
GS-3N 105 mm 170 mm
GS-3S 105 mm 155 mm
1252
glasstec
glasstec
EuroGlassMachinery S.r.l.
Address Viale del Lavoro, n° 19
37030 Colognola ai Colli
Italy
Telephone +39 045 8802114
Fax +39 045 9580844
Internet Address www.egm-srl.it
MyCatalog
MyCatalog
GEMINI series
automatic turntable spinning machine for low/medium output, CAM-driven,
6 and 8 mould, with individual electric spinning motors and individual
pneumatic ring system.
ORION series
automatic turntable spinning machine for medium/high output,
Geneva-wheel-driven,8,12 and 16 mould, with individual electric spinning
motors and individual pneumatic ring system.
Booth Hall 13 D04
PRODUCT OVERVIEW
VEGA series
automatic turntable spinning machine for low output, CAM-driven 6 mould
feeding by hand or Ball-gathering Robot.
01.06.01 Gob feeder
01.06.07 Press machines
01.06.14 Flash welding and fire polishing machines
PRODUCT DETAILS
ALPHA series
semi-automatic hydraulic press machines.
BETA series
automatic turntable press machine, single gob, multi-index for operation
with variable number of moulds, from 3 to 8.
Fire Polishing Machine LPM and RPM series
linear and rotary both combustion equipment suitable for either gas/air or
gas/oxygen burners
DELTA series
automatic turntable press machine for low/medium output, single gob,
CAM-driven 6 and 8 mould.
OMEGA series
automatic turntable press machine for medium/high output, single and
double gob, Geneva - wheel - driven, 8,12 and 16 mould.
1253
glasstec
glasstec
EUROMATIC S.r.l.
Address Via La Malfa, 4
24047 Treviglio
Italy
MyCatalog
MyCatalog
is the fastet high precision system for the production of pharmaceutical
cartridges from glass tubes, mainly used for dental anaesthetics and insulin
for diabetics`pen systems. Making use of our know- how and the state- ofthe- art technology. Euromatic offers innovative equipment with hihg
performances both in terms of precision and production speed.
Telephone +39 0363 303200
Fax +39 0363 301720
Internet Address www.euromatic.it
Booth Hall 13 A15
PRODUCT OVERVIEW
Eurostar Concrete Technology S.p.A.
Address Via delle Industrie, 49
33050 Pavia di Udine / Udine
Italy
Telephone +39 0432 655687
Fax +39 0432 655166
Internet Address
Booth Hall 15 A44
PRODUCT DETAILS
ZETA 103
PRODUCT OVERVIEW
PRODUCT DETAILS
Eurostar Mixing System
1254
glasstec
glasstec
The mixing system with its reversible mixing blades, synchronized and
coordinated movements produce material of homogeneous consistency.
MyCatalog
MyCatalog
EURO-TECH Vacuum
Address Dammstr. 1
72351 Geislingen
Germany
Telephone +49 7433 90468-0
Eurostar Planetary Mixers
On every Eurostar Planetary Mixer or Low Profile Skip Hoist we fabricate,
from the planetary gearbox we have engineered and built, to the onboard
Engineering, embodies high quality materials and our know-how.
Fax +49 7433 90468-13
Internet Address www.euro-tech-vacuum.de
Booth Hall 15 C14
PRODUCT OVERVIEW
Eurostar Specials
All of the EPM and GTM mixers are engineered, designed and fabricated in
our work facilities, special requirements can be implemented as all of our
staff have been in the mixing industry over 20 years.
Tower twins with Eurostar planetary mixers
Built to withstand high production requirements, enhanced to meet the
latest and high demanding needs of modern mixing.
PRODUCT DETAILS
Abstapelanlagen
Komplettausrüstungen für Abstapelanlagen unter Einhaltung höchster Qualitäts- und Sicherheitsrichtlinien
Transportsysteme
Transportsysteme in zahlreichen Ausführungen und unter Berücksichtigung
der individuellen Wünsche und Anforderungen
1255
glasstec
glasstec
MyCatalog
Einzelkomponenten
ob Serie oder Sonderanfertigung, Sie erhalten unsere Komponenten und
Saugplatten in fast allen Größen und Materialien passend für Ihre
Anwendung
MyCatalog
*Furnace Drilling/Electrode Installation
http://www.excelsius-international.com
Falorni Gianfranco S.r.l.
Address Viale IV Novembre, 15
50053 Empoli (FI)
Italy
Telephone +39 0571 922333
Fax +39 0571 920816
ExCelsius Global Services GmbH
Internet Address www.falorniglass.com
Address Bgm.-Dr.-Nebel-Str. 14
97816 Lohr
Germany
Booth Hall 14 B05
PRODUCT OVERVIEW
Telephone +49 9352 6044-00
01.09.06 Fusing Kiln
Fax +49 9352 6044-19
Internet Address www.excelsius-global.com
Booth Hall 15 A35
PRODUCT OVERVIEW
01.04.09 Combustion technology
PRODUCT DETAILS
Service
*Heat-ups and Commissioning
*Controlled Cool-Downs
*Expansion & Contraction Measurement and Control
*Hot-Hold with Production Continuation Capability
*Cullet-Fill
*Furnace Tap & Drain
*Regenerator Melt-Out
PRODUCT DETAILS
Micro GM F 10, 30, 75
Falorni Gianfranco Srl is pleased to present its new line of small glass
melting furnaces, gas fired, mod. Micro GM F 10, 30 and 75.
Falorni Srl, with this new line of small melting furnaces, provides small
artistic workshops with the advantages of its experience in the field of
artistic glass.
The result of that experience is the new line of Micro GM F furnaces, that
provide solutions to the problems of flexibility and quality. In particular:
They reach the melting temperature very quickly, so that they can be turn
on in the morning to work the glass already the same afternoon.
They permit traditional methods of glass removal, from the working
opening, either with the blowpipe or with the ladle.
The hole on the bottom permits extraction of the glass for the production of
beads and threads of glass. The hole is also fundamental for cleaning the
furnace during color changes.
All MGM furnaces can be tilted by 45° using a special mechanism. Tilting is
very useful for production with the "Casting" technique and for processing
1256
glasstec
glasstec
blown glass because, as it permits gradual tilting of the furnace, it is
possible to keep the level of molten glass higher.
They are all mounted on wheels for full mobility.
They can work with either Methane gas or LPG.
MyCatalog
MyCatalog
MINIGLASS
OPERATION
03.10.01.07 Sealants, adhesives and insulation materials
Start: pressing start button, the fan starts rotating. After that the spark plug
is energised and finally the gas valve is switched on.
Heating up: it's programmable. It's recommended to increase the
temperature less than 20°C/hour.
Batch charging: it's starts when the temperature is about 1350 °C.
To speed up the melting of the batch we recommend to fill the furnace in 3 4 steps.
Melting and working: it's enough to set the proper temperature and the
furnace will follows your instructions.
SAFETY
Flame control: a photo cell monitors the flame and in case stops the gas to
the burner.
Gas pressure reducer: equipped with max pressure shut off valve.
Audible alarm: it's energised when the gas shut off valve is off and when
the temperature is out of the limits.
Ferlam Technologies
Address 85 rue Monge
59056 Roubaix Cedex 1
France
PRODUCT DETAILS
Crystal and table ware
Ropes and tapes for lagging around tools, guides and pincersConveyor
beltsMark free contact materialNo thermal shockOperating temperatures:
250 - 800 °CIncreased lifetime (+/- 6 times as long as asbestos)No
pre-heating station
=> Safer and cleaner work place
=> Energy consumption reduced
=> Ecotax savings
FIB-SERVICES S.A.
Address Rue des Azalees 3
7331 Baudour
Belgium
Telephone +33 320 659-670
Telephone +32 65 76040-0
Fax +33 320 659-699
Fax +32 65 76040-9
Internet Address www.ferlam.com
Internet Address www.fib-services.be
Booth Hall 12 B50
Booth Hall 13 C67
PRODUCT OVERVIEW
PRODUCT OVERVIEW
1257
glasstec
glasstec
PRODUCT DETAILS
MyCatalog
MyCatalog
Fickert + Winterling, Maschinenbau GmbH
RPR®
RPR® Material
RPR® Powders and S-Bricks
In order to provide the customer with the most reliable ceramic material :
- RPR® powders as well as the S-bricks® follow severe quality controls
during the production flow.
- FIB-SERVICES in collaboration with research centres and universities
constantly work on the improvement of the quality of the ceramic welding
materials
The R.P.R.® Equipment
The R.P.R.® Equipment is composed of :
Projection MachineProjection lancesCleaning kitAccessories
Main advantages of the R.P.R.® Equipment :
- Handling
The R.P.R.® machine is really easy to handle thanks to its :
weight : only 138 kg
size : Height : 1200 mm, Width : 600 mm, Depth : 800 mm
practical handles to carry the machine wherever you need it
- Safety
The R.P.R.® equipment is certified and approved by the German company
called D.M.T. No moving parts compose the machine and the R.P.R.®
process does not need any pressure vessel nor N2.
- Use - Maintenance
The R.P.R.® equipment is really easy to use and to maintain :
Only 2 (two) operators are requiredThe welder has a total control of the
machine and of the welding
thanks to the foot pedal controlPowder feeding through hopper. The
powder bags weight only 10 kg.Simple maintenance since there is no
electric nor electronic parts
in the R.P.R.® machine
Address Wölsauer Str. 20
95615 Marktredwitz
Germany
Telephone +49 9231 502-0
Fax +49 9231 502-52
Internet Address www.fickertwinterling.de
Booth Hall 13 D87
PRODUCT OVERVIEW
02.01.02 Glass saws
PRODUCT DETAILS
Flachglasziehmaschine
Flachglasziehmaschine im DOWNDRAW-Verfahren, in OVERFLOW als
auch in Düsentechnik.
1258
glasstec
glasstec
FICO Industrie
MyCatalog
MyCatalog
PRODUCT OVERVIEW
Address 16, rue Juiverie
F - 69005 Lyon
France
Telephone +33 0 426235151
Fax +33 0 472983358
Internet Address www.fico.fr
Booth Hall 13 E86
PRODUCT DETAILS
Moulds
Hanving the most modern equipments for controls and quality, FIMA
OLIMPIA Fonderie has been specialising for many years in the production
of special cast irons for the glass industry moulds, alloyed to Fe-Vn, Fe-Mo,
Fe-Cr, Fe-Ti and Nickel. The very flexible and dynamic organisation
structure, allows us to give right answers the needs of this market. We have
an internal mould model department whit a specialised staff for the building
of models and three furnaces for heat treatments.
PRODUCT OVERVIEW
FINNTEMP Oy
PRODUCT DETAILS
lubricatiors
lubrication and cooling of the glass gob shears,
lubrication and cooling of the diamond tools for the manufacturing of raw
materials : glass, crystal, refractories, semi-conductors,
mould lubrication in glassworks
Address Sammonkatu 64A
33540 Tampere
Finland
Telephone +358 3 447855-0
Fax +358 3 447855-2
Internet Address www.finntemp.com
Booth Hall 13 E04
Fima Olimpia Fonderie S.p.A.
PRODUCT OVERVIEW
Address Via di Poneta, 17
50021 Barberino Val dïElsa (Fi)
Italy
Telephone +39 055 807-3048
Fax +39 055 807-3171
Internet Address www.fimaolimpia.it
PRODUCT DETAILS
ShapeWizard Advantageous air-supported final heating proces
Booth Hall 14 C74
1259
glasstec
glasstec
MyCatalog
Thin glass capability
Homogenous glass temperature
MyCatalog
02.12.04 Purification of exhaust gases
Proper thin glass bending and tempering on a ring mould was not possible
until air-supported final heating was invented.
Depending on glass size, a thickness of only 4 mm causes difficulties in
controlling sag. The adjacent chart describes the differences with various
glass thicknesses. Sag appears quickly, especially during the final stages
of heating. Only air-supported final heating gives glasses fully controlled
and repeatable sag.
The patented ShapeWizard air-supported final heating and FINNTEMP
technology enables tempering of glasses down to 3.1 mm thickness with
controlled, repeatable sag. Heat strengthening is possible even with 2.3
mm glass thickness. The glass temperature is homogenous and breakage
practically zero.
FIVES STEIN
Address 3, rue Jules Guesde
91130 Ris-Orangis
France
Telephone +33 1 60911140
Fax +33 1 60911092
Internet Address http://www.fivesgroup.com/FivesStein/EN/Expertise/Glass/Products/Pages/Products.aspx
Booth Hall 13 D51
PRODUCT OVERVIEW
01.03.08 Raw material technology and prewarming cullet technology
01.04.06 Regenerative systems
01.04.07 Recuperative systems
1260
glasstec
glasstec
MyCatalog
COMPANY NEWS
MyCatalog
Fives Stein, the leading supplier of float glass plant, technology and equipment for new
glassmakers has recently patented a new technology for the production of high quality
anti-reflective glass substrate.
This innovation is dedicated to the production of solar glass and in particular to the
growing thin-film glass segment. It can produce float glass substrates having a natural
anti-reflective surface and combines the technical advantages of patterned glass
anti-reflection surface with the perfect flatness and virgin glass surface of the float bath
manufacturing process.
Fives Stein, with its experience, technologies and technical partnerships, is in a position
to address all the glass making needs of thin films and c-Si solar modules production.
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
1261
glasstec
glasstec
MyCatalog
Fives Stein stands as the major engineering and Hot End equipment specialist supplier
of the new glassmakers and has already successfully delivered Hot End for 20 float
glass plants worldwide.
Fives Stein production equipment is internationally recognized and is in operation in
more than one third of all the float glass plants in the world.
Currently, the group is implementing the following major float glass contracts:
Obeikan Glass Co: a new 800 tons per day float glass plant in Saudi Arabia.
The scope of supply includes the plant engineering and the delivery of the furnace, tin
bath, lehr and air pollution control.
YugRosProdukt - The first new Russian glassmaker
The scope of supply includes the plant engineering and the supply of the furnace, tin
bath, lehr, N2H2 plant, cutting line and air pollution control system, the first one to be
installed on a glass plant in Russia.
Düzce Cam: a new 600t/d float plant in Turkey
The scope of supply includes the plant engineering and the furnace, tin bath and lehr.
SalavatSteklo in Russia
The scope of supply includes the complete delivery of a new tin bath.
SEJAL Glass a 550t/d float line for the first independent Western quality Indian
glassmaker
The scope of supply includes the plant engineering and the furnace, tin bath, lehr and air
pollution control system, the first one to be installed on a glass plant in India.
Euroglas Polska a new 1000 t/d float line for GlasTrösch s no. 4 float line
The scope of supply mainly includes the delivery of the new tin bath.
MyCatalog
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
FIVES STEIN Ltd.
Address 4A Churchward-Southmead Park
OX11 7HB Didcot, Oxon
United Kingdom
Telephone +44 1235 811111
Fax +44 1235 817676
Messe Düsseldorf
Internet Address www.fivesgroup.com
Booth Hall 13 D51
PRODUCT OVERVIEW
01.06.01 Gob feeder
PRODUCT DETAILS
Fives Stein experience in float glass plant
A float glass plant consists of the following main sections:
1. The storage area for the treated raw materials,
2. The batch processing plant,
1262
glasstec
glasstec
3. The melting furnace section
4. The air pollution control
5. the tin bath section
6. the annealing lehr section
7. the protective atmosphere generation plant,
8. the glass panes storage building.
Fives Stein has developed all its strategy over the years around its core
business which is to design and supply thermal equipment dedicated to the
glass industry. Fives Stein has the capability to provide for your float glass
project the complete hot end package based on independent and renowned
technology.
Fives Stein is mostly renowned as being the reference partner of many new
float glassmakers in the world, and of all the successful independent
European projects, i.e. EUROGLAS, MANFREDONIA VETRO (Gruppo
Sangalli) or GES Scaieni.
Fives Stein is also a supplier of key process equipment for the major
Chinese glassmakers willing to improve their production and export quality
glass products.
The quality and performance of our equipment are also acknowledged by
recurrent orders from the float glass industry leaders:
NSG/Pilkington,
Guardian Industries,
Saint Gobain,
Asahi Glaverbel
A Complete range of services
Fives Stein is also in position to adapt its scope of supply and services to
best suit the needs of your float glass plant project, from the supply of
separate equipment to a plant-wide design and complete supply, including
services such as the training of your production personnel in existing float
plants and plant operation assistance.
MyCatalog
MyCatalog
Fonderie Bartalesi S.r.l.
Address Via Tevere, 1
53036 Poggibonsi / SI
Italy
Telephone +39 0577 936669
Fax +39 0577 982221
Internet Address www.fonderiebartalesi.com
Booth Hall 14 C74
PRODUCT OVERVIEW
PRODUCT DETAILS
Alloys for glass industry castings
Bronze semifinished and finished neck rings
1263
glasstec
glasstec
Fonderie Valdelsane S.p.A.
Address Strada di Gabbricce, 6
53035 Monteriggioni / SI
Italy
Telephone +39 0577 304730
Fax +39 0577 304755
Internet Address www.fonderievaldelsane.com
MyCatalog
FOND METALLI CONVEYORS S.r.l.
Address Via XXV Aprile, 2 Loc. Levata
23804 Monte Marenzo / LC
Italy
Telephone +39 0341 6361
Fax +39 0341 630247
Internet Address www.fondmetalli.com
Booth Hall 14 C60
Booth Hall 14 A25
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
01.10.02 Cullet transportation
PRODUCT DETAILS
k250 LAMINAR GRAPHITE
Estabilished as a reference in the costruction of mould and accessorys.
The laminar microstructure of it has been conceived for having the ability of
the qickest thermic dispose,supported also from a vast choice in terms of
chemicol composition.
The peculiarity of it is very aimed for needs of hight speed in production.
PRODUCT DETAILS
Metallic Conveyor Belts
Today speed and automatism are fundamental for productive process. In
this logic metallic conveyor belts fond their own application.
Inserted in eqipments (ovens in general, driers, cooling systems, washing
systems) or used to convey the material into working cycle, they can meet
some and different demands. Manufactured in different materials they can
work at room temperature, at low (-60° C) and high (1200° C) temperatures
and also in aggressive environments.
1264
glasstec
glasstec
MyCatalog
FOR G, s.r.o.
Address Teplická 129
419 01 Duchcov
Czech Republic
Telephone +420 417 835372
Fax +420 417 835373
Internet Address www.forg.eu
MyCatalog
We produce and deliver equipment for transport and storage of glass.
Primarily, we focus on steel stands (stillages), platforms and pallet systems
for storage and truck transport of large-size flat glass (with the possibility of
additional usage for railway transport or for shipping). We are a certified
supplier of the Glaverbel Group.
Glass Conveyors and Positioning
The solution of transfer, manipulation and positioning of the glass is usually
a part of our projects, especially in connection with the automation of the
automotive glass production. We also possess experience of completion of
flat glass conveyors (float, patterned glass, etc.), or of individual solutions
of the automotive glass manipulation and positioning.
Booth Hall 12 E07
PRODUCT OVERVIEW
Forma Glas GmbH
Address Salzburger Str. 1
5145 Neukirchen
Austria
Telephone +43 7729 20299
Fax +43 7729 20290
02.11.01 Tools
PRODUCT DETAILS
Inloader Stands
- A / L stands for transport and storage of flat glass of the PLF size
Internet Address www.formaglass.com
Booth Hall 14 A53
PRODUCT OVERVIEW
01.06.01 Gob feeder
01.06.02 Ball feeder
01.06.04 Bar feeder
- Standardized Inloader platform (for Inloader truck trailers)
01.06.06 Blowing machines
- Carrying capacity of 28 500 kg
- Minimization of glass losses during transport and manipulation
- Modification of the stand in accordance with the customer s requirements
Stands, Platforms and Pallet Systems for Transport and Stora
05.02.01 MRP machine and transport adjustment
1265
glasstec
glasstec
MyCatalog
MyCatalog
PRODUCT DETAILS
PRODUCT DETAILS
Blasmaschine IBS
Der im Bild gezeigte Maschinen-Typ kann in verschiedenen Modifikationen
mit 10 bis 24 Stationen zur Herstellung von Kelchgläsern, Bechern,
Glühlampenkolben, Laborartikeln, Thermoskannen und anderen im
Blasverfahren herzustellenden Glasartikeln gebaut werden. Die im
Rotations-Blasverfahren arbeitenden Maschinen können auch mit einer
Festblasvorrichtung ausgestattet werden.
Mit einem Spezialequipment ist auch eine Produktion von Kelchgläsern mit
gezogenem Stiel (in Zusammenarbeit mit einer Ausziehmaschine) möglich.
FORTE S.r.l.
Address Via Melchiorre Gioia, 19
29017 Fiorenzuola D'Arda / PC
Italy
Telephone +39 0523 981535
Fax +39 0523 242344
Internet Address www.fortesrl.net
AUTOMATION
F.O.R.T.E. Srl are specialized in automation and control systems for the
glass industry, with special care of:
> Furnace control
> Distributors and forehearth control
> Auxiliary control
> Boosting system control
F.O.R.T.E. Srl are skilled in the following sectors:
> Industrial electrical systems
> Water treatment systems
> Industrial automation and instrumentation
> Process control
> Loop-Diagram, P&I and Flow-Chart development
> Signal transfer and handling with traditional technology
> Signal transfer and handling with field bus
> Software for PLC and PC (SCADA/HMI) for plant supervision
> Remote stations for monitoring, control and assistance of software
application packages (supervision, management, etc.) via Local Area
Network (LAN) or Wide Area Network (WAN)
F.O.R.T.E. Srl provide technical consultancy, maintenance, design,
production and installation of automation systems, by integrating
instrumentation and software programs and supplying auxiliary as well as
turn-key systems.
By previous severe tests, F.O.R.T.E. Srl provide their Customers with the
best instrumentation for industrial and laboratory process control, thus
guaranteeing working life and reliability.
The experience of F.O.R.T.E. Srl engineers together with a flexible and
dynamic organization, guarantees the Customer with immediate assistance
for the systems and instrumentation installed.
Booth Hall 13 D49
PRODUCT OVERVIEW
1266
glasstec
glasstec
Franke Industrieofen-Service
Address Goethestr. 2
01468 Moritzburg
Germany
Telephone +49 351 83640-46
MyCatalog
MyCatalog
Predictions for temperature and stress distribution as well as for thermical
strain in the refractory material
Calculation of heat losses for varied lining
http://franke-ios.de
Fuchs Lubritech GmbH
Fax +49 351 83640-47
Internet Address www.franke-ios.de
Booth Hall 13 D73
PRODUCT OVERVIEW
Address Hans-Reiner-Str. 7-13
67685 Weilerbach
Germany
Telephone +49 6374 924-5
Fax +49 6374 924-940
Internet Address www.fuchs-lubritech.de
PRODUCT DETAILS
Commissioning, inspections, FEM, bottom corrosion sensor
Bottom corrosion sensor FIOSens® for glas melting furnaces
Permanent grid monitoring of the furnace bottom with ceramic sensor
plates within the base layer
Alert for glass contact at the sensor plates in the isolation layer before glass
break through and with position specification in the control unit
Installation while general repair
Commissioning:
Booth Hall 14 A59
PRODUCT OVERVIEW
PRODUCT DETAILS
GLASOL products
All products formulated to comply with the latest legislation Research
Visualization of the temperature distribution within the furnace and
regulation of the start-up burners depending on the temperature field
Reduction of CO or NOx emissions to a minimum by modified start-up
burners
Inspektions:
Development and production in our premises
Endoscopy in the furnace interior
Infrared-thermography-inspection for bassin and top
High-temperature-thermography in the furnace interior to visualize
temperature distribution while operation
Diagnostics/analytics for refractory concrete, glas and emissions
Inspections of glas processing units
FEM-Modelling for furnace components:
No use of toxic chemicals
Short delivery times
Low budget by stable and long life products
Highest standards for safety and security
1267
glasstec
glasstec
Füller Glastechnologie Vertriebs-GmbH
94518 Spiegelau
Germany
MyCatalog
MyCatalog
The pressing manufacturing mode is designed to produce glass items with
décor and items with a wide range of simple and complex shapes. The
pressing system may be combined with gob feeding and continuous casting
(in combination with the movement of the roundtable and the
height-adjustable frame). It is also compatible with every mould system
available (block mould, basket mould, hinge mould).
Telephone 0049 8553 518
Fax 0049 8553 514
Internet Address www.f-gt.de
Booth Hall 13 C02
futronic GmbH
PRODUCT OVERVIEW
01.04.13 Feeder colouring
01.06.01 Gob feeder
01.06.04 Bar feeder
Address Tolnauer Str. 3-4
88069 Tettnang
Germany
Telephone +49 7542 5307-0
Fax +49 7542 5307-70
Internet Address www.futronic.de
Booth Hall 13 C41
PRODUCT OVERVIEW
01.06.10 Injector machines
01.02.04 Laboratory equipment
01.06.15 Metering machine
02.13.02 Software
05.01.01.02 Measurement and control of viscosity
05.02.03 Electronically controlled machine cooling
PRODUCT DETAILS
Roundtable Press
1268
glasstec
glasstec
MyCatalog
PRODUCT DETAILS
StrainTESTER / Polariscope
Mit dem StrainTESTER kann der Entspannungs-prozess von Glas schnell
und einfach direkt an der Produktionslinie überwacht werden. Aufgrund von
Temperfehlern oder Einschlüssen auftretende thermische bzw.
mechanische Spannungen werden schnell erkannt und können qualitativ
und quantitativ bewertet werden.
MyCatalog
In the area of conveying and handling equipment we design both single
units as well as complete line systems.
Adding these units to our screen printing machines to realize complex
production lines or simply handling, stacking, aligning flat glass are part of
our daily business. Once more, automotive glazing is the key product we
are dealing with, i.e. flat glass in preprocess lines and/or bent glass in
postprocess lines.
The following list shall serve as an overview:
Belt- and roller conveyors
Angular transfers and turn stations
Loading / unloading tables
Stacking equipment
GEROLD GmbH & Co. KG, Maschinenbau
Shuttle transfers
Alignment stations
Address Herrenpfad-Süd 44
41334 Nettetal
Germany
Telephone +49 2157 817-0
Inspection tables for quality assurance
Furthermore, GEROLD designs and realizes installations for automation
solutions such as automatic assembly of windshields and PVB or sidelites
and PVB. Linking and handling installations for robot applications (e.g.
mirror button application, soldering) are also part of this product line.
Fax +49 2157 817-100
Internet Address www.gerold-mb.de
Giardina Officine Aeromeccaniche
Booth Hall 15 D09
PRODUCT OVERVIEW
PRODUCT DETAILS
Glass Machinery - Material Handling Equipment
Address Via Vico Necchi, 63
22060 Figino Serenza (CO)
Italy
Telephone +39 031 7271
Fax +39 031 727249
Internet Address www.giardinagroup.com
Booth Hall 16 D78
PRODUCT OVERVIEW
1269
glasstec
glasstec
MyCatalog
PRODUCT OVERVIEW
01.06.01 Gob feeder
02.06.03 Mirror coating equipment
02.06.08 Sputtering targets for glass coatings
03.07.07.01 Window painting systems
MyCatalog
03.10.03.01.06.04 Coating of sand-blasted glass
PRODUCT DETAILS
Produkt Description
Machines for the application of ceramic and organic paints, silicon-based
products and similar products - such as antifogs - by means of roller
coaters, curtain coaters and automatic spray machines as well as drying
and cooling systems. The solutions offered by Giardina are the most
innovative and efficient. Especially the new and unique certified Micro
Wave System MOS® realised to guarantee the most rapid and excellent
drying for water-based cycles.
Glamaco Maschinenbau GmbH
Address Prasseweg 1
01640 Coswig
Germany
Telephone +49 3523 646-0
Fax +49 3523 646-28
Internet Address www.glamaco.com
Booth Hall 15 B20
PRODUCT DETAILS
blowing machine RBM 16/180
Glass blowing machine RBM 16/180, developed by GLAMACO
Maschinenbau GmbH, based company s 48-year experience in glass
technology and machine construction. GLAMACO blowing machines are
appreciated for their reliability, performance, high productivity and
cost-effective operation.
Characteristics of the blowing machine RBM 16/180
Capable of producing a wide range of quality products (tumblers, coffee
pots, bowls, vases, hard glass lamp bulbs, lab ware)
Extremely precise and uniform dimensions
High production efficiency and continuous trouble-free operation
Simple and quick job change
Easy operation and maintenance economical operating costs
The machine consist of
Gob loading system
Machine turret with 16 blow stations
Blow station with divided working tables
Single motor drive system for working table rotation
Unloader KWA-4 for taking out the articles with moil
Control with synchronization to other equipment
1270
glasstec
glasstec
Screw Charger
For special glass processes GLAMACO deliver also screw chargers for
batch and cullet, called batch chargers. In various forms, these systems are
in successful and reliable use in some glassworks in the whole world still
today. Our systems distinguish by a long lifetime, reliability, simple method
of construction and a well controllable function for glass depth level
precision up to 0.2 mm. The range of capacity of our machines reaches
from 1 to 100 ton per day.
Preferred application fields are production of water glass, TV glass and
different types of fiber glass, glass wool and something similar. Our screw
chargers distinguished by the fact that they are absolutely closed against
furnace atmosphere.
MyCatalog
MyCatalog
Glasinvest Engineering und Anlagenbau GmbH
Address Freiligrathstr. 9
01445 Radebeul
Germany
Telephone +49 351 8322-0
Fax +49 351 8322-155
Internet Address www.glasinvest.com
Booth Hall 14 B02
Transport and Handling Systems
For our production lines for technical hollow ware we deliver all necessary
equipment to handle the hot glass and to connect all glass machines:
Take out for blowing machines
Taking out and turning over device KWA 4
Conveying systems
Transport conveyor belts
Inclined conveyors
Conveying systems with cooling boxes
Corner transfer systems
Transfer systems between conveyors
Push bar stackers
Portal charger
Electrical lehr loader
Pneumatic lehr loader
PRODUCT OVERVIEW
PRODUCT DETAILS
Behälterglas-Industrie
Behälterglas-Industrie
Flachglas-Technologie
Anlagenbau für die Glasindustrie
GLASMA AB
Address Langgatan 22
361 31 Emmaboda
Sweden
Telephone +46 471 48150
Fax +46 471 33391
Internet Address www.glasma.se
Booth Hall 13 D68
1271
glasstec
glasstec
PRODUCT OVERVIEW
01.01 Raw material for glass production
PRODUCT DETAILS
GLASMA standard products
Since the start of the Company in 1979 a significant number of high quality
GLASMA standard products have been developed. Today we supply a
wide range of pelletized lead free crystal, lead crystal and other glass
making products to glassworks and studios all over the world.
Glass Service Inc.
Address Rokytnice 60
755 01 Vsetin
Czech Republic
MyCatalog
MyCatalog
The Engineering Department of GLASS SERVICE, INC. was established
to develop and produce new small capacity electric pot furnaces to support
environmentally friendly glass melting. Since 1992, when this division was
started, GS Engineering has made over 40 installations of these pots
furnaces as a turn-key deliveries.
Electric pot furnaces supplied by GS provide an economic and
environmentally friendly alternative to oil or gas fired small furnaces for
many different types of glass. Electric melting processes are especially
suitable for high value production such as crystalline and lead crystal or in
geographic regions where the use of electric energy is favorable.
GLASS SERVICE would be pleased to provide you with its technology
that gives you the following benefits:
TYPE OF GLASS
Soda lime glass
Lead crystal
Color glasses
Others (the only exclusion is a glass with a content of fluor such as opal)
Telephone +420 571 498511
Fax +420 571 498599
Internet Address www.gsl.cz
Booth Hall 15 C01
PRODUCT OVERVIEW
TYPES OF ELECTRIC POT FURNACES
GS can deliver following types of electric pot furnaces:
Singlepot furnaces - ATEL (pot diameters 65 - 100 cm)
Doublepot furnaces - ATEL (pot diameters 65 - 100 cm)
Crucible singlepot furnaces - ART STUDIO (pot diameter 40 - 60 cm)
Crucible doublepot furnaces - ART STUDIO (crucible diameter 40 - 50 cm)
Singlepot furnace with a feeder for the production of costume jewelry and
rods - CHATON
Furnace for melting of glass cullets - HOBBY
PRODUCT DETAILS
Electric Pot Frunaces
1272
glasstec
glasstec
Glass Service S.r.l.
Address Via Cascina Lari
56027 San Miniato
Italy
Telephone +39 0571 4442
Fax +39 0571 417051
Internet Address www.glassservice.it
Booth Hall 14 D69
PRODUCT OVERVIEW
MyCatalog
MyCatalog
The combustion chamber can be configured cross firing type (with side
burners) or end firing type (with burners on the stack side) depending on
tank size and type of combustible. The burners supplied with the furnace
are of high luminosity type and are specially designed for glass melting
applications.
All the auxiliary systems of the furnace such as combustion plant, control
system, batch charging system, control level systems are conceived for
the specific use in glass melting application so as to guarantee maximum
performances, high reliability and working flexibility.
All furnaces are equipped with efficient combustion systems managed by
advanced, easy to use and fully automatic control systems able to
supervise all main operation parameters and continuously monitoring the
plant working condition advising in case of any problem.
The furnace working end can be equipped with forehearths of different size
and purpose or can be equipped with bays for manual and robot gathering.
Glass Technologies S.r.l.
Address Via J. Massarenti, 9
29100 Piacenza
Italy
Telephone +39 0523 623058
Fax +39 0523 609785
PRODUCT DETAILS
melting furnaces
GLASS SERVICE offers a wide range of continuous melting furnaces with
production capacity from 5 ton/day up to 60 ton/day suitable either for
manual manufacturing and high speed automatic production.
Each continuous melting furnace shall be tailored to customer requirements
and to the specific working conditions in which it will operate. The furnaces
can be equipped with combustion systems fired with Natural Gas, LPG and
heavy oil and can be integrated with either with electric boosting systems
and Oxygen boosting systems for higher working flexibility and better
efficiency.
GLASS SERVICE offers continuous melting furnaces for the production of
soda lime glass for various applications, lead crystal for high quality
glassware, borosilicate glass for lighting or ovenware.
Internet Address www.glasstechnologies.it
Booth Hall 13 F30
PRODUCT OVERVIEW
1273
glasstec
glasstec
01.04.12 Processing of water cooling for cullet treatment
MyCatalog
MyCatalog
A high efficency water recirculation system can be applied where factory
water is not available. Drain over 12 t/h of molten glass is possible with low
water consumption.
PRODUCT DETAILS
Schmelzofen
Glass Technology International GmbH
Address Mühlenkamp 31
22303 Hamburg
Germany
Telephone +49 40 7343567-0
Fax +49 40 7343567-10
Internet Address www.glassgti.com
Booth Hall 14 A59
PRODUCT OVERVIEW
Waste gases ejectors
High efficiency design suitable to guarantee the necessary draught for
regenerative furnaces
Ejector nozzle made of high resistance stainless steel
Fan speed controlled by inverter
Self supporting metallic chimney
Venturi basement with protective refractory lining inside
Nox reduction
Nox reduction by means of a new type of burner and furnace geometry and
a reduction in the quantity of dust present in the waste gases thanks to
suitable filtering systems
Low water consumption
PRODUCT DETAILS
Schmiermittel für Behälterglasproduktion
Von der Schmelzwanne bis zum Verladeterminal liefern wir Ihnen alle
Schmiermittel, die Sie für die Behälterglasproduktion benötigen.
GTI (zertifiziert nach ISO 9001) ist schon lange bekannt als Pionier in der
Forschung, Herstellung und Weiterentwicklung von HiTech-Schmiermitteln
unter spezieller Beachtung von:
- Scheren- und Rinnenschmiermitteln
- synth. Schmiermitteln für Heißendeqipment
1274
glasstec
glasstec
MyCatalog
- Schwabbelmassen
OSCILLATING BATCH CHARGER
- Vorformbeschichtung
The CONVENTIONAL Oscillating Batch Charger fits all sizes and types of
furnace. It is used to seal the furnace and to obtain better batch distribution.
- IS Maschinen-Oele
MyCatalog
- Hochtemperaturschmiermitteln
Glassworks Hounsell
Address Park Lane, Halesowen
B63 2QS West Midlands
United Kingdom
Telephone +44 1384 560666
Fax +44 1384 561363
Internet Address www.glassworkshounsell.co.uk
Booth Hall 13 F22
PRODUCT OVERVIEW
SCREW CHARGER
SCREW CHARGER
Suitable for all sizes of furnaces, it is used mainly with Oxy Fuel and when
sealing the furnace is a top priority.
STANDARD FEATURES
Continuous hardened screw section.
(Constant or variable pitch)
Static Hopper.
Geared Motor with Torque Limiter.
Inverter.
Polyurethane Wheels
OPTIONS AVAILABLE
Segmented screws (180°)
Water Cooling for tube tip.
Adaptable Specification to Customer Requirements
PRODUCT DETAILS
MARK 3
The MARK III Oscillating Batch Charger is the most developed batch
charger available. It is suitable for all sizes and types of furnace. It s design
allows increased flexibility as the OBC can be split leaving the Stationary
Water Box to seal the dog-house increasing efficiency and reducing the
risks of thermal shock.
Oscillating Batch Charger
STATIC CHARGER
STATIC CHARGER
The STATIC Charger is ruggedly built, simple to install and cheap to
maintain. Suitable for sealing a doghouse on furnaces up to 200 TPD
STANDARD FEATURES
-3 Water Cooled Sections
-Water thermometers
-AC or DC Motor
X-Y CHARGER
X-Y CHARGER
An X-Y/Boom Charger is suitable for all sizes and shapes of electric
furnaces it is capable of charging between 1.5 tpd and 80 tpd and
adaptable to the customer's exact requirements
1275
glasstec
glasstec
G-Lehrs
Address Molenstraat 37/1
2220 Heist op den Berg
Belgium
Telephone +32 475 832875
Fax +32 1576 2326
Internet Address www.lehrs.be
Booth Hall 13 F15
PRODUCT OVERVIEW
PRODUCT DETAILS
Annealing and Decorating Lehrs
Standard Features :
Controlled by temperature-controllers with an accuracy of 1º
Celsius.Modular construction facilitates installation and simplifies future
expansion or alteration.Each section has two major components : the
outside case and the inside tunnel, mounted totally independent, isolated
from each other with ceramic fibre insulation.A long lifetime thanks to the
thickness and quality of the steel and the rigid construction with U
profiles.Inside tunnel in stainless steel, especially shaped to provide
optimum air circulation.Extremely thick asbestos-free ceramic fibre between
the inside tunnel and the outside case makes the G-lehr the best isolated
lehr in the market.The hot air circulating fans (stainless steel) are direct
driven (no belt).Deflecting baffles for perfect hot air distribution.Fish bone
belt support in solid stainless steel.Inside return belt (Outside return on
demand).Belt min 5% chrome.Alarms for fans and burners gives high
security.We guarantee perfectly welded and mounted lehrs, exact
dimensions and a flawless finish.Only the best materials are chosen, ABB
motors, Siemens servomotors, SKF bearings.Simple construction - Low
price - Low maintenance
MyCatalog
MyCatalog
Natural Gas and LPG heating :
Independent burners, each controlled by its own safety box and
temperature controller.Proportional or high-low-off control.Nozzle mix
adaptable to all gas pressures.100 % safe, electronically controlled.Incoloy
heat distributors.Peep eye for flame control
Electric heating :
Nichrome 80/20 Heating elements.Controlled : On/Off or proportional with
thyristors.Newest high temperature resistant ceramic supports for heating
elements.High temperature resistant connections between the heating
elements and the power supply.Long lifetime.
Process Control :
Supervises all G-LEHRS equipment by computer.Possibility to control
non-G-LEHRS equipment.Extremely easy to use.Runs under Windows NT,
2000 and XP.Possibility to change the production settings on the controllers
in the lehr panel or via the computer.Security : Changing settings on the
controllers in the lehr panel, can be disabled via the computer.
Belt Traction :
A powerful motor with electronic speed control, fully protected, gives a wide
range of belt velocity, in the safest conditions.The simple mechanical
construction makes belt tension and belt tracking adjustment very easy, as
well in mounting as in process.Belt is driven over a very large contact
surface. The drive roller is rubberised, has a diameter of 500 mm and the
belt makes contact over more than 270 degrees.
Mould Pre-heating Kiln
Gas direct or indirect firing.Electric heating.Oil heating.Air
convection.Automatic temperature control.Complete stainless steel
construction.Standard sizes 1-2-3-4 m² / all other sizes available.Doors 1-2
or 3.These ovens can be used for annealing and decorating.Easy
programmable for an equivalent of a 16 section lehr.Simple construction Low price - Low maintenance
1276
glasstec
glasstec
GPM_Glass Project Management and Used Equipment
MyCatalog
GPS Glasproduktions-Service GmbH
Address Rue des Journaliers 3
7822 Ghislenghien
Belgium
Address Ruhrglasstr. 50
45329 Essen
Germany
Telephone +32 68 28 46 20
Telephone +49 201 3600771
Fax +32 68 28 46 15
Fax +49 201 3600737
Internet Address www.gpmglass.com
Internet Address www.gps-essen.de
Booth Hall 13 D07
Booth Hall 14 E73
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
01.06.01 Gob feeder
PRODUCT DETAILS
02.12.01 Treatment of used glass
PRODUCT DETAILS
Forming machines
Used machines and equipments for production of container and tableware
glass
http://www.gpmglass.com/-Forming-Containers-Tableware-and01.09.03 Annealing lehrs, continuous/intermittent operation
Second Hand lehrs
Several models available from glass plants in Europe
http://www.gpmglass.com/-Annealing-and-Tempering-
01.06.01 Gob feeder
Plunger
Feeder:
Typen:
81 - 115 - 503 - 515 in den Ausführungen
Standard, Hochgeschwindigkeit und
servo-elektrisch
Ausgleichszonen:
81 - 510 - Sonderausführungen
Feederköpfe:
81 Standard - 81 Tief - 503 - 515
Drehrohr:
503 - 515 für 7" - 8" - 10" - 12"
Elektrische Tonrohrhöhenverstellung
Feederscheren der Typen 81 - 503 und
Parallelscheren
IS-Maschinen :
Neufertigung und Generalüberholung
Verfügbar in den Mittenabständen :
1277
glasstec
glasstec
4¼" - 5" - 5½" - 6" - 6¼" (Doppeltropfen),
3" - 4" - 4¼" (Dreifachtropfen)
Maschinengrössen:
4 bis 12 Stationen (auf einem Maschinenbett)
2x6 Stationen Tandem,
2x8 Stationen Tandem
Zubehör / Optionen:
Servo-Tropfenverteiler in allen Mittenabständen
Rinnenaufnahmesystem
Pressdruckregelanlagen
Zweikreispegelkühlungssysteme
CCH-Transportbänder
Servo-Abstreifersysteme
AMC Maschinenantriebssysteme
Elektronische Steuerung TS2000
Austauschmechanismen
Ersatzteile
MyCatalog
MyCatalog
PRODUCT OVERVIEW
01.10.05 Separator applying machines
PRODUCT DETAILS
Glasbestäubungsanlagen
Laufgeschwindigkeit: 1-2 m/s
Mittlere Höhe über Fußboden: 900 mm
Breite: 1300 mm (Autoglas) bis 4600 mm
Es können verschiedene Pudersorten verwendet werden
Ausrüstungsteile
Rinnenausrüstungen,
Hülsenzylindereinsätze,
Vorform- und Fertigformhalter,
Blaskopf-,
Vorformboden-,
Trichter- und Greiferarme, etc.
Wirtschaftsglas-Maschinen:
Pressblasmaschinen, Aggregate und Sondermaschinen zur Herstellung von Trinkgläsern.
Grafix GmbH
Address Kupferstr. 40-46
70565 Stuttgart
Germany
Telephone +49 711 7869-0
Fax +49 711 7869-252
Internet Address www.grafix-online.de
Booth Hall 15 D15
1278
glasstec
glasstec
MyCatalog
MyCatalog
Grafotec Spray Systems GmbH
Address Keimstr. 7 A
86420 Diedorf
Germany
Telephone +49 821 90699-0
Fax +49 821 90699-10
Internet Address www.grafotec.com
Booth Hall 15 B34
PRODUCT OVERVIEW
PRODUCT DETAILS
http://www.grafotec.com
AP 950 Advanced Powdersprayer for flatglass
AGA 1000 Auto Glass Applicator for perfect windshields
AP 900 Advanced Powdersprayer for Autoglas
AP 960 Advanced Powdersprayer for flatglass
1279
glasstec
glasstec
DE 1000 Dust Extractor System for clean and safe environment
LA 1000 Liquid Appliator System for liquid stain protection
Mobile Applicator for flexible and manual application
MyCatalog
MyCatalog
COMPANY NEWS
Die Ausschussquote beim Biegen von VSG Autoscheiben ist wesentlich mitbestimmt
durch den Trennmittelauftrag vor dem Zusammenlegen der Scheibenpaare. Nur bei
einem perfekt getrennten Scheibenpaar werden optische Fehler, Beschädigungen der
Klebemasken sowie das Verschmelzen des Scheibenpaares insbesondere an seinen
Rändern und in kritischen Bereichen mit engen Biegeradien vermieden.
Seit Mitte der 90iger Jahre stehen Düsenauftragsgeräte zur Verfügung, die den
Pudertrockenauftrag mit höchster Gleichmäßigkeit und Sicherheit erlauben.
Diese Systeme haben in Verbindung mit erforderlichen Einhausungen und
Abluftreinigungen zu einer deutlichen Reduzierung der Biegefehlerquote geführt.
Die Automobilindustrie hat in den letzten Jahren mit immer komplizierteren Biegeformen
die Anforderungen an die Glashersteller ständig gesteigert, so dass die
Trockenbepuderungssysteme ihre Grenzen erreichten.
Grafotec liefert Anlagen zum Trockenpuderauftrag mit Walzenauftragsgeräten und mit
Düsenauftragsgeräten. Zusätzlich liefert Grafotec Nassauftragssysteme
(Liquid-Applicator) zum Korossionsschutz von Glas. Bei einem renommierten
europäischen Glashersteller konnte mit diesem System unter Verwendung eines
wassergelösten Trennmittels mit extrem enger Korngrößenverteilung die
Biegefehlerquote auch bei komplizierten Scheibenformen mehr als halbiert werden.
Mit dem Liquid Applicator verwendet Grafotec eine seit vielen Jahren bewährte Technik
bei der Floatglasproduktion.
Die bisherigen Ergebnisse dokumentieren einen wesentlichen Fortschritt in der
Trennmitteltechnik für den Biegeprozess, so dass sich Grafotec auf eine lebhafte
Nachfrage, nicht nur von Autoglasproduzenten, einstellt.
Mehr Informationen
1280
glasstec
glasstec
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
MyCatalog
MyCatalog
The coating of Autoglas-Primitives online at a float line for the corrosion protection of the
surface has been possible for a number of years. The online application of organic,
aqueous acids immediately following the glass production significantly contributes
towards improving the quality of the glass surfaces and therefore increases productivity.
There exist no corrosion issues with the Liquid Applicator as it is made entirely of
Grafotec, which has its headquarters situated in Augsburg, has a highly successful
special coating system on the market that is able to meet all user needs. Important
aspects include an exceptionally well balanced surface coating with the acidic film, as
well as ensuring a uniform mixture of the application medium.
The compound formulation is achieved in addition to the actual Applicator standing and
separate mixing-unit, which contains a feeding and pumping station. And it is here where
the uniform acid concentration is formulated. Permanent current mixing and pumping
stations ensure that the solution remains in motion and a metering station is constantly
concentrating the solution in the liquid Applicator.
Permanent mixers and pumps keep the solution in motion and a dosing unit is able to
provide a constant concentration of the solution in the Liquid Applicator, which consists
of a tank in which the solution is retained at a medium level. A rasterized roller is placed
into the liquid and through turning at high-speed, the solution will swirl and become
atomized. As a result of this pressure, it is able to move through an adjustable gap
towards the glass surface.
Through this fine atomization, the solution forms a spray curtain and delivers an even
coating to the glass surface. The amount of solution required can be determined by
adjusting the gap and the application width will automatically adapt to the width of the
current glass ribbon.
In float lines situated between the tin-bath at the warm and cold end, there are frequently
substantial air movements, especially for plants in climatically warmer regions. To avoid
the adverse effects of wind draught on the application process, the entire system is
enclosed with Plexiglas that is framed by extrusion profiles.
stainless steel. This technology was developed by Grafotec at the start of the 1990 s and
resulted in the delivery of the first unit to an Asian glass company in 1997. This unit had
a working width of 4200mm and was exported to China, a region with extreme climatic
conditions and to date, it has not experienced any problems.
Following this delivery, Grafotec produced many such Liquid Applicators, all of which had
working widths of between 3600mm and 4200mm. Indeed, the largest ever Liquid
Applicator has been created with a working width of 5700mm. A Japanese-European
consolidated group in the Czech Republic ordered the product, in which they have
expressed their satisfaction and this is used for glass widths between 2600mm and
1281
glasstec
glasstec
MyCatalog
5700mm.
To cover this large application area, the machine works with four application units on two
moveable cross bars. The glass edges are recognized automatically, meaning the liquid
application follows the drift of the glass ribbon in its working width. Application amounts
and adjustments are made via a touch screen panel.
Grafotec has not only built a reputation as a supplier of Liquid Applicators, but also
through realizing many hundreds of orders for dry powder applicators of various media
onto glass.
Since the mid 1980 s, Grafotec has established itself as a centre of excellence. This has
occurred through delivering a high number of job facilities for powder applications for
different purposes, whether wet or dry. With an extensive product range and customers
throughout the world, the most telling sign of their success comes through the repeat
orders they receive - a clear sign of customer satisfaction.
In addition to the well known roller type applicators, Grafotec can also provide equipment
with electrostatic charging devices for improved powder adhesion, as well as nozzle type
applicators. The nozzle type applicators are not used with high-pressure compressors,
but instead with blowers in the low pressure range, hence minimizing any potential
pollution of the environment. Furthermore, virtually all Grafotec nozzle type applicators
work without exhaust cleaning systems. And through the delivery of many hundreds of
units for powder applications and its highly varied range of applications, Grafotec has
continued to establish its fine reputation.
Grafotec machines operate at all well known glass producers throughout the world.
MyCatalog
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Messe Düsseldorf
1282
glasstec
glasstec
MyCatalog
The error rate with the sag bending process is largely defined through the quality of the
interleaving application prior to the pairing of the glass sheets. The reality is that optical
distortions or marks at the glueing mask can only be avoided with a perfectly separated
pair of glass. This is particularly the case at the edges and in the critical areas that have
a tight bending radius.
The highly impressive results have come about following the review of serial production
By the mid-1990 s, new nozzle applicator technologies with unknown results in regard to
evenness and process security became commonplace in the glass industry.
Thousands of these systems had been successfully used in the graphic industry and
together with enclosures and air-filters they helped reduce the error rate at sag bending.
Consequently, in the following years, a large number of these products entered the
market.
The design policy of recent years proved to continue to challenge the windshield
producers, as a result of more and more complicated bending shapes, which in turn
brought the dry powdering systems to their limits.
Grafotec, with its headquarters situated in Augsburg, produces machines for dry
powdering glass with roller technology and nozzle-technology and these products have
proven highly successful with their large customer base. In addition, the company almost
exclusively delivers wet application systems (Liquid Applicator) for the corrosion
protection of glass. Indeed, at the beginning of 2008, a well known European glass
producer used a wet-applicator to apply the finest particles suspended in water with
such a degree of accuracy and process security that the error rate dropped dramatically.
Interleaving material was used as a temperature resistant powder with a tight particle
variation.
statistics. For the AGA (Auto Glass Applicator) technology, Grafotec applies what is
known from the float application a roller is placed into the liquid and by turning at
high-speed, the solution is swirled and atomized like a cloud, in turn resulting in a very
even spray The results represent a quantum leap for the interleaving application in the
sag bending process. With the initial orders having already been placed, Grafotec is now
preparing for a potentially very high level of demand for these systems as the use of
these machines increases productivity and not only for windshield producers but all glass
producers.
MyCatalog
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Graphoidal Developments Ltd.
Address Broombank Road
S41 9QJ Chesterfield
United Kingdom
Telephone +44 1246 266000
Messe Düsseldorf
Fax +44 1246 269269
Internet Address www.graphodial.com
Booth Hall 13 C37
1283
glasstec
glasstec
PRODUCT OVERVIEW
MyCatalog
MyCatalog
02.09.03 Foil treating technology (storing, climate, uncoiling)
PRODUCT DETAILS
Shear Spray Systems
Lubrication Engineers, Shear Spray Systems for complete glass plants,
Shear Spray Systems for individual production lines, Cold-End coating
application systems, Dosing and Mixing units for cold end coating,
Multi-Cycle lubrication systems for I.S. Machines
05.01.01.07 Measurement and control of glass tension
05.02.02 CNC control for handling machines
05.03.03 Optimization systems for cutting and yield
Grenzebach Maschinenbau GmbH
08 glasstechnology live
PRODUCT DETAILS
Address Albanusstr. 1-3
86663 Asbach-Bäumenheim
Germany
Telephone +49 906 982-0
Fax +49 906 982-2108
Internet Address www.grenzebach.com
Booth Hall 15 C33
PRODUCT OVERVIEW
01.10.01 Optimization of glass cutting and glass production yield
Stapeltechnik
Von Staplern für kleinformatige Scheiben bis hin zum Großformat reichen
die Möglichkeiten der Grenzebach-Produktpalette. Eines ist allen
Stapelgeräten gemeinsam: sie zeichnen sich aus durch extrem kurze
Taktzeiten, perfektes Stapelbild und schonenden Umgang mit den
Scheiben.
Konzipiert als Schwingenstapler, Überkopfstapler, Kombi Stapler für Badund Luftseite Stapelung, sowie Robotertechnologie hält Grenzebach immer
die passende Lösung für Ihren Anwendungsfall bereit.
Beschichtungsanlagen benötigen den Zugriff auf verschiedenste
Glasformate. Lagertechnik mit und ohne Gestellhandling bietet alle
Möglichkeiten der Beschickung.
02.05.01 Laser-isolating technology
1284
glasstec
glasstec
MyCatalog
COMPANY NEWS
In Spring 2008 Grenzebach celebrated a very special day: the 20th birthday of
Grenzebach Corporation in Newnan, Georgia USA. On this occasion CEO Stefan
Grenzebach welcomed colleagues from the parent company in Germany and from other
affiliates of the Group as well as high rank guests and business partners.
Unfortunately the owner and founder of the company, Rudolf Grenzebach was unable to
attend himself, but in his speech, which was read by his daughter, the many guests
learned how the small American firm developed from humble beginnings into a
successful company with a staff of more than 100.
The affiliate produces the whole range of Grenzebach technology and together with the
parent company and the other sites in Germany, China and India supplies customers all
over the world.
The Grenzebach team was especially honoured by the visit of Georgia Governor Sonny
Perdue who in his speech emphasized the intense connection of the Grenzebach Group
with the State of Georgia. Congratulations were also offered by members of the US
Congress and the Senate, a representative of the German Federal Ministry of Transport
and many others. They all expressed their best wishes for a successful future to the
Grenzebach family, to the management and staff of Grenzebach Corporation.
The "Grenzebach Buam", a band comprised of employees from the parent company who
had travelled all the way from Germany for the occasion, entertained the guests who
celebrated Grenzebach's German-American success story.
MyCatalog
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Messe Düsseldorf
for Exhibitors
Ident No.:
1285
glasstec
glasstec
MyCatalog
In Spring 2008 Grenzebach celebrated a very special day: the 20th birthday of
Grenzebach Corporation in Newnan, Georgia USA. On this occasion CEO Stefan
Grenzebach welcomed colleagues from the parent company in Germany and from other
affiliates of the Group as well as high rank guests and business partners.
Unfortunately the owner and founder of the company, Rudolf Grenzebach was unable to
attend himself, but in his speech, which was read by his daughter, the many guests
learned how the small American firm developed from humble beginnings into a
successful company with a staff of more than 100.
The affiliate produces the whole range of Grenzebach technology and together with the
parent company and the other sites in Germany, China and India supplies customers all
over the world.
The Grenzebach team was especially honoured by the visit of Georgia Governor Sonny
Perdue who in his speech emphasized the intense connection of the Grenzebach Group
with the State of Georgia. Congratulations were also offered by members of the US
Congress and the Senate, a representative of the German Federal Ministry of Transport
and many others. They all expressed their best wishes for a successful future to the
Grenzebach family, to the management and staff of Grenzebach Corporation.
The "Grenzebach Buam", a band comprised of employees from the parent company who
had travelled all the way from Germany for the occasion, entertained the guests who
celebrated Grenzebach's German-American success story.
MyCatalog
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
1286
glasstec
glasstec
MyCatalog
Einen ganz besonderen Tag konnte Grenzebach im Frühjahr 2008 feiern: die
Niederlassung in Newnan, Georgia USA hatte ihr 20jähriges Jubiläum. Zu diesem
Anlass begrüßte Geschäftsführer und CEO Stefan Grenzebach Kollegen aus den
Stammwerk in Deutschland und weiteren Werken der Grenzebach-Gruppe sowie
hochrangige Gäste aus Politik und Wirtschaft.
In einem durch seine Tochter überbrachten Grußwort des Firmengründers Rudolf
Grenzebach, der selbst leider nicht kommen konnte, erfuhren die Gäste, wie sich die
Firma in Amerika aus kleinen Anfängen zu einer Produktionsstätte mit über 100
Mitarbeitern entwickelte. Heute ist Grenzebach Newnan eine wichtige Säule der
Grenzebach-Gruppe.
Das Zweigwerk deckt das gesamte Spektrum der Grenzebach-Technologie ab und
beliefert gemeinsam mit dem Stammwerk und weiteren Niederlassungen in Deutschland,
China, Indien Kunden in aller Welt.
Besonders geehrt fühlte sich das Grenzebach-Team durch den Besuch des Governors
von Georgia, Sonny Perdue, der in seiner Rede auf die enge, gewachsene Verbindung
der Grenzebach-Gruppe mit Georgia verwies. Viele weitere Gratulanten - unter ihnen ein
Vertreter des amerikanischen Kongresses und des Senats sowie ein Gast aus dem
Deutschen Bundesministeriums für Verkehr - , überbrachten der Familie Grenzebach,
der Geschäftsführung und den Mitarbeitern von Grenzebach Corporation ihre besten
Wüsche für eine erfolgreiche Zukunft.
Musikalisch begleitet wurde die Feier durch die "Grenzebach Buam", einer aus
Mitarbeitern bestehenden Blaskapelle, die eigens aus dem Stammwerk in Bayern
gekommen war, um der deutsch-amerikanischen Erfolgsgeschichte einen
entsprechenden Rahmen zu geben.
MyCatalog
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
Grob GmbH, Glashüttentechnik - Glasofenbau
Address Hofweg 20
97737 Gemünden a. Main
Germany
Telephone +49 9351 9720-0
Fax +49 9351 9720-88
Mehr Informationen
Internet Address www.grob-glass.de
Booth Hall 13 E53
PRODUCT OVERVIEW
1287
glasstec
glasstec
MyCatalog
MyCatalog
Gronemeyer Maschinenfabrik GmbH & Co.
PRODUCT DETAILS
Grob-Färbefeedersysteme
Grob-Färbefeedersysteme für hohe Farbqualität auch bei hohen
Durchsätzen.
Address Rohrweg 31
37671 Höxter
Germany
Telephone +49 5271 9756-0
Fax +49 5271 33866
Internet Address www.gronemeyer.org
Booth Hall 14 E06
Grob-Versorgungsstationen
Grob-Versorgungsstationen für homogene Gas-Luftgemische für optimale
Beheizung.
PRODUCT OVERVIEW
Grob-Vorherdsysteme
Grob-Vorherdsysteme, nach neuestem technischen Stand, für homogenen
Glastransport bei maximaler Wirtschaftlichkeit.
PRODUCT DETAILS
Conveyors
GRONEMEYER conveyors between Lehr and layer table
Individual systems as interface to modern inspection technology
- Conveyors with slat-band and modular plastic belts
- Vertical Side Grip conveyors for bottles, crates and other unit loads
- Bottle and Jar Turner with blowing-out device
- Road Way Bridges incl. cleaning by blowing-out device
- Pressure-free Aligners
- Buffer Tables
- Product Detection / Orientation
- PLC for complete lines
http://www.gronemeyer.org
1288
glasstec
glasstec
MyCatalog
MyCatalog
Hager Sondermaschinenbau GmbH
Conveyors
GRONEMEYER conveyors between Lehr and layer table
Individual systems as interface to modern inspection technology
- Conveyors with slat-band and modular plastic belts
- Vertical Side Grip conveyors for bottles, crates and other unit loads
- Bottle and Jar Turner with blowing-out device
- Road Way Bridges incl. cleaning by blowing-out device
- Pressure-free Aligners
- Buffer Tables
- Product Detection / Orientation
- PLC for complete lines
Accessories for Conveyors
- many kinds of slat-band chains in plastic or stainless steel
- modular plastic belts
- chain sprockets
- chain rollers
Address Weilerweg 5
86753 Möttingen
Germany
Telephone +49 9083 9696-0
Fax +49 9083 9696-30
Internet Address www.hager-gmbh.de
Booth Hall 15 B33
PRODUCT OVERVIEW
PRODUCT DETAILS
Portalstapler am kalten Ende
- and many more accessories for conveyors
1289
glasstec
glasstec
MyCatalog
Hamad M. Aldrees & Partners Company for Industry & Mining
Address Prince Fawaz Bin Abdulaziz
11371 Riyadh
Saudi Arabia
Hartmann & Bender Vertriebs- und Produktionsgesellschaft mbH
Address Hauptstr. 70
65396 Walluf
Germany
Telephone +966 1 4744444
Telephone +49 6123 998210
Fax +966 1 4744440
Fax +49 6123 998212
Internet Address www.aldrees-im.com
Internet Address www.hartmann-bender.de
Booth Hall 10 B35
Booth Hall 14 A52
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
01.06.01 Gob feeder
PRODUCT DETAILS
Feldspar
02.11.01 Tools
Gypsum (under process)
Limestone
Quartz
Silica Sand
PRODUCT DETAILS
01.06.01 Gob feeder
Formenschalen
- Sonder Formenschalen
für AIS / TG 4 1/4 Formen an IS DG 5
Standardformenhalter
- 3 TG Standardformenhalter
für 3 7/8 und 3 Formen
1290
glasstec
glasstec
MyCatalog
MyCatalog
PRODUCT OVERVIEW
Heavydrive
Address Goethestr. 8A
86609 Donauwörth
Germany
Telephone +49 906 1267008-0
Fax +49 906 1267008-9
Internet Address www.heavydrive.com
Booth Hall 11 E03
PRODUCT OVERVIEW
02.01.01.03 Cutting technology for technical glass
PRODUCT DETAILS
HDL 800
Glastransportwagen
02.01.04.02 Thermal snapping devices
02.05.02 Laser-marking technology
02.05.03 Laser-removing technology
HEGLA GmbH & Co. KG
PRODUCT DETAILS
37688 Beverungen
Germany
Stacking Technology
Telephone +49 5273 905-0
Fax +49 5273 905-255
Internet Address www.hegla.de
Booth Hall 15 D19
Loaders and Unloaders
1291
glasstec
glasstec
MyCatalog
MyCatalog
Tilting Table ART
Harp rack
IFP 22 + TL 100
Glass Transporter
SortJet
Vacuum Lifting Devices
KPL-F
1292
glasstec
glasstec
Henan Chief Way Industry Co. LTD.
Address Shengdi Temple, Chaohua County,,
Xinmi
City, Henan Province
452385 Zhengzhou
China (Rep.)
Telephone +86 371 69237666
Fax +86 371 69237175
Internet Address www.chiefway.com.cn
Booth Hall 13 F03
PRODUCT OVERVIEW
MyCatalog
MyCatalog
HEYE International GmbH
Address Lohplatz 1
31683 Obernkirchen
Germany
Telephone +49 5724 26452
Fax +49 5724 1288
Internet Address www.heye-international.de
Booth Hall 14 B19
PRODUCT OVERVIEW
PRODUCT DETAILS
Temperature hole brick
Used in the flame space for temperature measurement.
01.06.01 Gob feeder
1293
glasstec
glasstec
PRODUCT DETAILS
01.06.01 Gob feeder
Servo Plunger
The Servo Plunger can be operated at all known feeder sizes of different
manufactures. It is characterized by a clearly structured design with a drive
unit consisting of a servo motor with a planetary roll spindle. At high
dynamics, this combination allows a maximum of transmissible forces with
long lifetime at the same time. Beside its basic function, the servo plunger
optionally offers the possibility of generating different gob weights for varied
production.
Servo Shears
Each shear arm of the Heye Servo Shear is driven via a rocking arm with
one separate servo motor. Thus, gearing for the mechanical
synchronisation is not needed and there are only a minimum number of
moving parts. As there is no reverse rotating of the drives during cut, even
at a high number of cuts with corresponding low motion times, a well
balanced cut of gobs is obtained, which is characterized by a low cutting
mark and a stable gob loading into the scoop.
MyCatalog
MyCatalog
3 axis version
This pusher system is characterized by a handling arm that is driven via
three servo motors. By a well-tuned motion profile of these three axes, it is
now possible to precisely place containers on the machine conveyor in
triple gob operation at conveyor speeds up to 80m/min.
2 axis version
For less demanding applications with conveyor speeds up to 60 m/min, a
two axis servo pusher is available which works without pusher cylinder.
Waretransfer
The Ware Transfer is designed for fast running production machines. By
the graduated speeds between the machine conveyor and the auxiliary
conveyor it is ensured that the frictional force, which is acting on the bottom
of the articles, is always guided in direction of the pockets during the
transfer. Thus, the articles are transferred onto the cross conveyor in a
defined distance without contacting each other. A real high-speed unit for
up to 800 bottles per minute and a medium-size version are available.
HORN Glass Industries AG
Address Bergstr. 2
95703 Plößberg
Germany
Telephone +49 9636 9204-0
947-5005
Stacker 4206
Fax +49 9636 9204-10
947-2016
Internet Address www.hornglas.de
Servo Pusher
Booth Hall 14 C01
PRODUCT OVERVIEW
1294
glasstec
glasstec
MyCatalog
MyCatalog
Hotwork International AG
Address Fabrikstr. 1g
8586 Erlen
Switzerland
Telephone +41 71 6492090
Fax +41 71 6492099
Internet Address www.hotwork.ag
Booth Hall 13 A35
PRODUCT OVERVIEW
PRODUCT DETAILS
Vibrationsflächeneinlegemaschine
Anwendungsbereich:
für Elektroschmelzwannen mit kaltem Oberbau
Aufbau und Ausstattung:
Einlegekapazität von 4 - 50 to/d
Grundrahmen mit Längs- und Querwagen
Vibrationsrinne
Staubabsaugung
SPS-Steuerung
PRODUCT DETAILS
Glas-Ablass
Extras:
- Operator Panel zur Eingabe der Parameter
Merkmale / Vorteile:
- Gleichmäßige Gemengeverteilung
- Gleichförmige Bewegung der Verfahrachsen
durch kraftschlüssigen Antrieb
- Langjähriger Einsatz & ausgereifte Technik
- Lange Lebensdauer dank stabiler Konstruktion
Kammerazusschmelze
1295
glasstec
glasstec
Huailai Tianyuan Special Type Glass Co., Ltd.
Address East Side of Jianshe Road, Industry
Zone
075400 Huailai
China (Rep.)
Telephone +86 10 82084632
Fax +86 10 82084632
Internet Address www.ty-glass.com
MyCatalog
MyCatalog
HUBTEX Maschinenbau GmbH & Co. KG
Address Werner-von-Siemens-Str. 8
36041 Fulda
Germany
Telephone +49 661 8382-0
Fax +49 661 8382-120
Internet Address www.hubtex.com
Booth Hall 15 B38
Booth Hall 10 F75-3
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT DETAILS
borosilicate amber glass rod£¨TYR009£©
1.Outer diameter: 4-300mm
2.Standard length: 1,200mm/1,500mm
3.Customized sizes are available (outside diameter: 3.5-300mm)
4.Different wall thickness is available
5.Main composition:
a) SiO2: 80 ¡À0.5%
b) B2O3: 13 ¡À0.2%
c) Al2O3: 2.4 ¡À0.2%
d) Na2O (+K2O): 4.3 ¡À0.2%
PRODUCT DETAILS
Modell M 150 (1-Mann-Version)
HUBTEX Mehrwege-Seitenstapler können Glaspakete bis zu 20 Tonnen
transportieren.
Die HUBTEX M-Serie benötigt nur 1 Fahrer. Hier steht der Bediener auf
einer Plattform über dem Glas.
Diese Bedienperson ist Fahrer und Einweiser zugleich. Vorteile bei dieser
Ausführung sind optimal freie
Sicht nach allen Seiten beim Fahren und Manövrieren, eine sichere
Aufnahme der Glaspakete und
geringere Personalkosten.
Elektro-Mehrwege-Seitenstapler,Modell MQ 60
1296
glasstec
glasstec
MyCatalog
Modell MQ 60
COMPANY NEWS
mit Klammervorrichtung zum Handling von 3 verpackten Glaspaketen,
Einladung zum Pressegespräch auf der glasstec am HUBTEX-Stand Halle 15, Stand B
38
Zeit: Dienstag, 21.10.2008, 14 Uhr
Thema: "HUBTEX als Logistik-Partner für die Glas- und Photovoltaik-Industrie"
* Effiziente Spezialgeräte als wichtiger Teil der Logistikkette. Fallbeispiel Sunfilm.
* Know-how-Transfer von der Glas- in die Photovoltaik-Industrie.
* Ausbau der Kapazitäten
Bitte bestätigen Sie Ihre Teilnahme per Rückmail an Frau Astrid Behling
[email protected].
auf Wunsch auch lieferbar für unverpacktes Glas und/oder mit
90°-Drehvorrichtung.
GLASGESTELL-TRANSPORTER VON 8,0 BIS 33 TONNEN
HUBTEX Glasgestell-Transporter werden in der Flachglasindustrie zum
Transport von A- und L- Gestellen
bis 33,0 to eingesetzt. Diese Transporter sind mit Elektro-, Diesel- oder
Gasantrieb erhältlich und können mit
Vulkollanrädern (PU) für den Innenbereich und/oder mit Gummibereifung
für den kombinierten Einsatz im
Innen- und Außenbereich ausgerüstet werden. Die Aufnahme des
Glasgestells erfolgt über synchrones
Anheben des Chassis mit Hubschiene. Durch den speziellen Vertikalhub
erfolgt das Anheben des Gestells
sicher und präzise, ohne Versatz. Die Glasscheiben werden beim
Transport durch vier hydraulische
Sicherungen gehalten.
MyCatalog
Mehr Informationen
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
1297
glasstec
glasstec
MyCatalog
MyCatalog
Strengthens curving procedure through heater element independent
percentage control.In view of different mold but independent control bottom
heating part.Special step-by-steps heats up control procedure.
Humanglass Machine Engineering Co., Ltd.
HyGear BV
Address No. 11, Shizhou Guangbei Industrial,
Area
528313 Chencun Town, Guang Dong
China (Rep.)
Telephone +86 757 2332450-0
Fax +86 757 2332456-6
Internet Address www.humamglass.com
Booth Hall 13 F62-3
PRODUCT OVERVIEW
PRODUCT DETAILS
SBF Completely automatic automobile glass hot curved stove
Humamglass Machine Engineering may provides different type automation
series heat curved stove for different goal and request customer, free
combination, construction section design series may allow based on output
increase but to increase construction section. Can long time or short time
production, also can at the same time several kind of different molds mix
production. Curving Duan Lunei heater element divides into different unit
alone to control, can guarantee accuracy control curving process. Can
replace a completely different product mold but not to need as necessary to
sever production.
Address Westervvoortsedijk 73
6827 AV Arnhem
Netherlands
Telephone +31 26 3664019
Fax +31 26 3629323
Internet Address www.hygear.nl
Booth Hall 13 F66
PRODUCT OVERVIEW
PRODUCT DETAILS
HGS-V (5 Nm3/h of hydrogen), HGS-L (50 Nm3/h of hydrogen)
HyGear offers standard products as well as specials, usually elaborated
through contract based development projects. The range of standard
products for on-site hydrogen generation covering a range from 5 to 250
Nm3/h. Standard systems use natural gas as fuel and deliver hydrogen with
a purity of 99.999% at a pressure of 6.5 bar.
Hydrogen generators can be applied for supply of high purity hydrogen to
industrial end-users for instance in the glass industry, metal industry,
electronics industry and food production
New technology, high grade
The brand-new advanced version hot curved stove its interior heater
element might independent control, it guarantee product quality stability. No
matter heater element structure it in chamber position all is careful
design.As a result of SBF reliable curving forming control method, it
processes the biggest steradian to be possible to surpass 35mm.
Machine characteristic:
1298
glasstec
glasstec
HyRadix, Inc.
Address 175 West Oakton St.
60018 Des Plaines, IL
USA
Telephone +1 847 840-4561
Fax +1 847 391-2596
Internet Address www.hyradix.com
Booth Hall 13 D14-2
PRODUCT OVERVIEW
PRODUCT DETAILS
Aptus On-site Hydrogen Generator
HyRadix s Aptus hydrogen generator produces cost-competitive and
reliable hydrogen supply at the customer s site. HyRadix s proven
technology is easily applied in a variety of industries including float glass,
oils hydrogenation, metals heat treating, and electronics, as well as many
others.
The Aptus system produces hydrogen from a feed stock of natural gas or
liquefied petroleum gases (LPG) and is easily integrated with customers
existing manufacturing processes.
We work closely with our customers to assess your exact hydrogen needs.
We tailor each system to produce the appropriate flow, pressure and purity
of hydrogen. Our team of experts will work with you to evaluate your needs
and provide the solution that best meets your hydrogen requirements.
Advantages
Customers using the Aptus hydrogen generator experience immediate
benefits including:
Hydrogen generated on-site, eliminating cost of delivery surcharges, risk of
supply interruptions and annual product price increasesSignificant total cost
reduction compared to alternative hydrogen supplyIntegration with the
existing natural gas or LPG supplyFast start-up timesUnattended operation
and remote monitoringTailored hydrogen purity from 99.95%, using
Pressure Swing Adsorption (PSA) technologySkid-mounted for ease of
MyCatalog
MyCatalog
integration with existing plant operations requiring only connections to
feed stock and utility supplyShop-fabricated and tested to ensure product
quality with standard off-the-shelf components that have demonstrated
reliability in industrial applications
Technology
The Aptus hydrogen generator uses HyRadix s proprietary catalytic
autothermal reforming technology to reliably and efficiently produce
high-purity hydrogen.
At the heart of the process, the proprietary reforming converter produces a
hydrogen rich gas from light hydrocarbons. The heat required for this
conversion is produced and consumed in-situ, thus avoiding the need for a
fire-box or other complex indirect heating equipment.
Specifics
Feed:
Natural Gas or LPG
Product Capacity:
50 Nm³/h or 100 Nm³/h
(1900 scfh or 3800 scfh)
Module can operate
between 25% and 100% of
capacity
Product Quality:
Purity: 99.95 to 99.999%
Oxygen: < 0.1 ppmv
Carbon monoxide: < 0.1 ppmv
Carbon dioxide: < 0.1 ppmv
Hydrocarbons: < 1 ppmv
Water: < 1 ppmv
Generated Pressure:
7 barg (100 psig)
Footprint:
2.1 m x 6.1 m
(7 ft x 20 ft)
Utilities per 100 Nm³ hydrogen:
Natural gas: 49 Nm³
Electric power: 30 kWh
Deionized water: 30 liters (8 gallons)
Cooling water: 25 m3/h (110 gpm) circulating
Instrument air: not required
The HyRadix Advantage
HyRadix is committed to meeting our customers hydrogen needs for
industrial and consumer manufacturing processes. Our engineers work
closely with our customers to achieve a seamless transition to on-site
generated hydrogen. We provide complete hydrogen solutions and services
to meet your needs including water purification systems, remote monitoring,
1299
glasstec
glasstec
MyCatalog
training and integration assistance.
http://www.HyRadix.com
I.S. Maintenance Ltd
Address Wakefield Road, Smithies
S71 1PA Barnsley, South Yorkshire
United Kingdom
Telephone +44 1226 297286
Fax +44 1226 204318
MyCatalog
IfG GmbH Ingenieurbüro für Glastechnik
Address Brunnweinbergstr. 19
71334 Waiblingen
Germany
Telephone +49 7151 4879770
Fax +49 7151 275207
Internet Address www.ifg-glass.com
Booth Hall 15 D15
Internet Address www.ismaint.co.uk
Booth Hall 13 C53
PRODUCT OVERVIEW
PRODUCT OVERVIEW
02.10.02 Brushing, high-pressure and ultrasonic systems
PRODUCT DETAILS
I.S Machines
We supply our machines to the most discerning customers. We can tailor
our machines to feature the best technology from third party suppliers. This
gives our customers the best possible solution for their forming
requirements. Our experience with on site service and maintenance results
in machines that are extremely maintenance friendly.
Single section upwardsSingle gob, double gob, triple gob4-1/4",5",5-1/2"
and 6-1/4" centre distancesTailored to the customers specificationsForming
pack - improves efficiency and speed
03.10.01.04.04 Nano coating technology
03.10.03.01.06.02 Coating of automotive glass
PRODUCT DETAILS
EPS Economic Powdering System
1300
glasstec
glasstec
EPS Economic Powdering System, world wide 500 installations in 37
countries, excellent powder homogeneity and adhesion of separating
powder on the glass.
http://www.ifg-glass.com
EPS Powdering System for windscreens / windshiels
EPS powder application system for powdering windscreens / windshields
before the bending process.
MyCatalog
MyCatalog
Inspection Systems have been designing and implementing machine vision
solutions for the engineering sector since the mid 1980s. Applications
range from optical character recognition to component identification, and
clients include blue-chip companies such as British Steel and BNFL.
We offer a full design and manufacture service, which includes:
mechanical support structures
lighting
electrical sub-systems
imaging hardware
capture and analysis software
interfacing to plant control systems
Whilst many of our solutions are developed in-house, we are also able to
interface to industry standard products such as LabView.
Intco GmbH
http://www.ifg-glass.com
Inspection Systems
Address Zur Drehscheibe 5
92637 Weiden
Germany
Telephone +49 9636 9249907
Address Unit 10, Rugby Park, Heaton Mersey
SK4 3EJ Stockport
United Kingdom
Telephone +44 161 9479111
Fax +44 161 9479099
Internet Address www.inspection-systems.co.uk
Fax +49 9636 9249904
Internet Address www.intco.de
Booth Hall 12 B06
PRODUCT OVERVIEW
Booth Hall 13 C82
PRODUCT DETAILS
PRODUCT OVERVIEW
PRODUCT DETAILS
Inspection Systems
Feuerfeste Erzeugnisse
Lieferspektrum sind vorwiegend standardisierte FF-Produkte, die von
ausgewählten Lieferanten bezogen werden. Für diese Produkte gelten
unsere Intco- Eigenschaftsvorgaben, welche einerseits auf unsere
langjährige Erfahrung basieren, sowie die etablierten internationalen
Standards wie ISO und PRE-Recommendations berücksichtigen.
1301
glasstec
glasstec
Alle Materialien werden vor Versand einer sorgfältigen Qualitätsprüfung
unterzogen.
Interglass, S.A. de C.V.
Address Lateral sur Periferico Norte 559
45150 Zapopan, Jalisco
Mexico
Telephone +52 33 3793880-0
Fax +52 33 3793881-1
Internet Address www.interglass.com.mx
Booth Hall 13 C86
PRODUCT OVERVIEW
PRODUCT DETAILS
Interglass Biogreen
Interglassoil Biogreen is a new and improved shear water coolant lubricant
that has been designed to mix instantly with water creating a very stable
emulsion while providing a clean shear cut.Interglassoil Biogreen is
compounded with the highest quality of base stock material in addition to
wetting and dispersing agents, Interglassoil Biogreen should virtually
eliminate buildup and blockages throughout the system. Interglassoil
Biogreen has a green color and is formulated with totally biodegradable
components and should not present any problems to water effluents.
MyCatalog
MyCatalog
IPROTec GmbH & Co. KG
Address Elsenthal 53
94481 Grafenau
Germany
Telephone +49 8552 97410-0
Fax +49 8552 97410-69
Internet Address www.iprotec-kg.de
Booth Hall 13 A10
PRODUCT OVERVIEW
PRODUCT DETAILS
Multifunktionales Greifersystem
Einsatz im begrenzten Raum
Erweiterung der Roboterfunktionalität
18-Stationen-Blasmaschine
1302
glasstec
glasstec
Modulbauweise
Schnellwechselsystem der Blassegmente
Modernste Steuerung mit Siemens SIMOTION D445SINAMICS
Servotechnik mit höchster Synchronität für alle Antriebe
umfangreiche Sensorik zur Steigerung der Produktqualität
mehrstufige Kölbelformung für optimale Wandstärkenverteilung
Technische Daten:
Produktionsgeschw. bis 30 Stück pro Minute
Maße(m): 5 x 4 x 5,6
Gewicht: 25 to.
Ø Teilkreis: 3,0 m
I-Scan Robotics Ltd.
Address Hasharon Industrial Park
60920 Kadima
Israel
Telephone +972 9 8912780
Fax +972 9 8912781
Internet Address www.iscanrobotics.com
Booth Hall 14 A35
PRODUCT OVERVIEW
PRODUCT DETAILS
Condor Flex
MyCatalog
MyCatalog
CondorFlex
I-Scan s new generation of the well proven Condor Multi Purpose Robotic
Stacker is a higly versatile and comprehensive robotic workcell.
Until now, flat glass manufacturers have settled for inflexible stacking
systems able to handle one size/quality at the time, using different
mechanisms for stopping and aligning the glass plates.
The Condor Flex presents the ideal solution for a flexible production mix of
split, LES & Jumbo size plates.
The system is composed of two heavy payload synchronized industrial
6-axis robots, with an additional 7th axis enabling he robots to travel on
linear slides in parallel to the float-line. The robots are capable of picking
different plates sizes or qualities on-the-fly, and palletize them fully
automatically.
It is possible to handle at the same time one Jumbo plate or two different
LES/Split size plates.
Advantages of the CondorFlex
Increased Flexibility
- Simultaneous handling of various sheets sizes and qualities
- Reduced set-up time
- Multiple destinations
- Landscape/Portrait unloading and stacking with no need for
mechanicalrotation
- Stacking onto wide range of racks and boxes
Reduced Capital Investment
- Installed next to an existing and running float line
- Directly on the main line, no need for a side-leg/transfer
- On-The-Fly handling eliminates the need to stop and align the glass
plates
- Reduced floor space
- No need for civil work preparation such as cullet system or indexing
platform
On-Line Implementation
- Perfect solution for running lines, and cold repairs
Maximum Safety
- The CondorFlex provides an impressive safety system incorporating a
closed zone with safety fences and switches.
Improved Quality
- Integrated Hawkeye real-time cut-glass vision inspection system
- Gentle vacuum gripping
- No mechanical glass squaring
HawkEye
Iscan's Glass Inspection System both inspects and sorts each and every
cut glass sheet. By using advanced web technology, the system detects
1303
glasstec
glasstec
marks, edge errors, cracks, and skews and analyzes glass dimensions.
More importantly, this is all done with absolutely no interruption to the
production line at whatever speed it is running at.
MyCatalog
MyCatalog
and load capacity of the vehicle are on request
IWG Ingenieurbüro Wagenbauer Glasofenbau GmbH
Italcarrelli S.r.l.
Address Via Monte Rosa, 9
36072 Chiampo / VI
Italy
Telephone +39 0444 623393
Fax +39 0444 420195
Internet Address www.italcarrelli.eu
Address Fürhaupten 35
94227 Zwiesel
Germany
Telephone +49 9922 8448-0
Fax +49 9922 8448-21
Internet Address www.iwg-online.com
Booth Hall 14 A53
Booth Hall 12 C36
PRODUCT OVERVIEW
PRODUCT DETAILS
PTN
The PTN is designed for handling glass loaded on inloader stillages (Jumbo
Size). The lifting system is an evolution of "Sicur - Lift" (patent pending) that
guarantees, also in breakcase, the maximun stability of the machine even if
it is loaded. The PTN is available as battery or Diesel powered truck and
with special tyres to work on tarmac floor. A wide range of optionals like
secondary drive panel control, seated operator place with electronic
turning, removable bad weather protection for the charging zone, etc are
also available.
PRODUCT OVERVIEW
PRODUCT DETAILS
IWG-Vollelektrisch beheizte Vorherde
Serie - Series: PTN
TPEN
The TPEN is designed to transport glass on stillages with load capacity up
to 33.000 Kg. The lifting system is an ITALCARRELLI® is patent pending
called "Sicur - Lift", that guarantees, also in breakcase, the maximun
stability of the vehicle even if it is loaded. Special lock glass system by
arms for "A" or "L" stillages are available on request. Platform dimensions
1304
glasstec
glasstec
Vollelektrisch beheizter Vorherd für Neutral-Glas und Borosilikat-Glas
IWG direkt elektrisch beheiztes Vorherd-System für Neutral-Glas und
Borosilikat-Glas mit Molybdän-Top-Elektroden, die durch die
Vorherd-Abdeckplatte ins Glasbad eintauchen.
Die Leistungszufuhr an den Elektroden wird geregelt durch EinphasenThyristorsteller / Transformatoren.
Für die Inbetriebnahme und Temperphase werden diese Vorherde mit
einem speziellen Brennersystem geliefert, das im Normalbetrieb nicht mehr
im Einsatz ist. Um Glasschlieren zu verhindern, ist jeder dieser Vorherde
mit einem IWG-Drainage-System und einer IWG-Rührereinheit
ausgestattet.
Vorteile:
Niedriger Energieverbrauch
Bessere thermische Homogenität
Keine Abdampfung von Bor
Bessere Regulierbarkeit auf Grund stufenloser Leistungszufuhr
IWG-Vollelektrisch beheizte Vorherde für Bleikristall-Glas
IWG-Vollelektrisch beheiztes Vorherd-System
Einsatz von horizontalen, durch die Kanalseitenwand installierten
Zinnoxid-Elektroden.
Die Glasoberfläche wird durch eine eintauchende AZS-Platte abgedeckt.
Zur Beheizung des Vorherd-Oberbaus wird der Vorherd mit
Molybdän-Disilizid-Heizelementen ausgestattet.
Die Leistungszufuhr jeder Vorherdzone wird über
Einphasen-Thyristorsteller / Transformatoren geregelt.
Jeder Vorherd ist mit einer IWG-Rührereinheit und falls erforderlich optional
mit einem IWG-Drainage-System ausgestattet.
Vorteile
Bessere thermische Homogenität
Keine Bleiabdampfungen
Weniger Schlieren
Leistungszufuhr
Optische Wanne
MyCatalog
MyCatalog
->Ziehen von Stäben
->Gießen von Barren
->Pressen von Brillenrohlingen
->Pressen von optischen Linsen
->Gießen von asphärischen Linsen
Unsere Wannen für optisches Glas werden mit Gas und elektrisch beheizt
und sind mit hochmodernster Platintechnologie ausgestattet
JCL Engineering Pte Ltd
Address 10, Anson Road, #23-04, International
Plaza
079903 Singapore
Singapore
Telephone +65 62254867
Fax +65 62238298
Internet Address www.jochenlee.com
Booth Hall 13 B07
PRODUCT OVERVIEW
01.06.01 Gob feeder
1305
glasstec
glasstec
PRODUCT DETAILS
JCL Press Machine
Jochenlee (JCL) develops and manufactures various models of press
machines according to customer's need.
Since the founding of our company in 1952, we have produced more than
100 press machines for the glass industry, including JP-12, JP-16, JPK-12,
JPKD-12 and JPDG-24.
These machines can be used for producing glass tumblers, bowls, plates,
tea cups, beer mugs, water jugs, juice blenders etc. Customer can choose
the most suitable press machine models based on their own specifications
and requirements.
We have a team of highly skilled glass production professionals and
machinery experts ready to provide any technical assistance and to build
the most suitable press machine for the glass plants.
Johnson Matthey Noble Metals
Address Orchard Road
SG8 5HE Royston
United Kingdom
Telephone +44 (0) 1763 253589
Fax +44 (0) 1763 253313
Internet Address www.noble.matthey.com
Booth Hall 15 B15
MyCatalog
MyCatalog
PRODUCT DETAILS
ZGS, Fabrications and ACT
Johnson Matthey Noble Metals is a long-established supplier of platinum
group metals to the glass industry. Our fabricated products range from
simple parts such as sheet to the more complex items such as clad stirrers,
feeder chambers and spout bowls.
The use of platinum and its alloys, such as 10% rhodium/platinum, is well
established in the glass industry. However, their applications often mean
high temperature operation of these materials. At high temperatures these
materials are weak and subject to creep.
They are also subject to contamination failure.
Johnson Matthey has developed a form of platinum, Zirconia Grain
Stabilized (ZGS), that is resistant to grain growth, the effect of
contamination and deformation at high temperatures.
An exclusive development by Johnson Matthey, ZGS platinum materials
offer significantly improved performance over conventional platinum and its
alloys.
We also supply ACT® platinum coated products such as thermocouples,
plungers, tubes, orifice rings, spout bowls and danner sleeves. Coatings
can also be deposited onto fusion cast furnace blocks, such as skimmers
and throat blocks. ACT® thermally deposits platinum and its alloys on to
glass contact ceramics, giving unparalleled corrosion resistance and
extended service life.
At Glasstec 2008 we will also be distributing information about the use of
iridium in the glass industry. Due to its extensive chemical and high
temperature mechanical properties, iridium has the potential to become as
important as platinum or rhodium/platinum alloys for high quality glass
manufacturing process.
http://www.noble.matthey.com/products/group/glasstechnologies
PRODUCT OVERVIEW
01.06.01 Gob feeder
1306
glasstec
glasstec
MyCatalog
COMPANY NEWS
Johnson Matthey is delighted to launch ACT platinum coatings for all types of fused cast
ceramics. Over many years the technology has demonstrated excellent control of
erosion caused by all types of molten glass. Its use was limited by poor
manufacturability, but new patented techniques have eliminated this problem and
enabled the routine availability of ACT Platinum coatings on fused cast refractory
ceramics. Glassmakers and furnace manufacturers should now automatically consider
the benefits of this technology prior to each and every furnace rebuild, for the protection
of critical blocks, such as the throat.
All glass-melting furnaces have areas that suffer exceptional corrosion rates and that
determine the overall system life. These can be protected from erosion by applying
platinum coatings of 300 to >500 microns. At these metal thicknesses, the mechanical
strength of the protective coating is determined by the intimate bond with the underlying
substrate, which for fused cast ceramics is achieved by laser treatment, as shown
above, before platinum or alloy deposition. Platinum alloys, e.g. 10%Rh-Pt, may be used
for applications where the temperature would normally exceed approximately 1400 C.
The intrinsic cost of platinum is always a concern, until it is appreciated that typically
more than 95% of the precious metal is recovered for the next campaign. This recovered
metal can therefore be offset against future orders, while at the same time this new
technology can provide tremendous production benefits. Within the last few months,
large fused cast ceramic blocks using this technology have been installed in the throat
areas of furnaces producing flat, borosilicate and soda lime glass.
The benefits to be gained from using this new ACT coating technology on fused cast
ceramics make it well worth considering when planning your next furnace re-build.
MyCatalog
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
JSJ Jodeit GmbH
Address Am Nasstal 10
07751 Jena
Germany
Telephone +49 3641 622920
Fax +49 3641 622940
Messe Düsseldorf
Internet Address www.jsj.de
Booth Hall 15 B20
PRODUCT OVERVIEW
1307
glasstec
glasstec
MyCatalog
suitable for following glass types:
- low-expansion borosilicate glass
- special soda-lime glass (incl. STN)
- opal glass
07.05 Research institutes and projects
MyCatalog
- lead glass
- optical glass
- enamel and frit
PRODUCT DETAILS
- alumo-borosilicate glass
oxy-fuel fired furnaces
- perfect glass quality
JUTEC Hitzeschutz GmbH
- significant energy savings
- comaratively low investment
costs
- low NOx- and dust emission
- safe and smooth operation
suitable for following glass types:
- borosilicate glass
- neutral glass
Address Mellumstr. 23-25
26125 Oldenburg
Germany
Telephone +49 441 30099-0
Fax +49 441 30099-99
Internet Address www.jutec.com
Booth Hall 10 A87
- soda-lime glass
- E-fibre glass
PRODUCT OVERVIEW
- lead glass
- TFT-glass
- glass ceramics
Electric Furnace
Advantages:
- compact design
03.06.01 Glass and mineral fibres (general)
03.06.02 Braided wire hoses and straps made of fibreglass
04.05 Protection devices
04.06 Working clothing
- high specific glass pull
- low energy consumption
- constantly high glass quality
- easy to operate
- minimum air pollution
PRODUCT DETAILS
Flammschutzmatten "trocken und feucht" von 700 ºC bis 3000 º
1308
glasstec
glasstec
direkte Löt- bzw. Schweißunterlage
Materialstärken von 5 - 50 mm
schützt das Material vor Verbrennungen,
(z.B. durch Schweißperlen, Funkenflug etc.)
asbestfrei
Flammschutzpasten "N" und "J"
Hitzeschutz bis ca. 3000 ºC, asbestfrei
Weiterfluß der Hitze im Material wird unterbunden
kostspielige und zeitaufwendige Demontagen entfallen
die zugeführte Energie wird auf den Einsatzbereich konzentriert
toxikologisch unbedenklich
Paste "N"
wird mit dem Spachtel aufgetragen und ist ideal für lange Schweißnähte.
Die Paste ist weich und flexibel.
Paste "J"
wird mit der Hand aufgetragen und klebt nicht an den Fingern bzw. am
Material. Die Paste ist fest und modellierbar.
K. Schulten GmbH & Co. KG
Address Industriestr. 3-7
48488 Emsbüren
Germany
MyCatalog
MyCatalog
PRODUCT DETAILS
Der Scheibenlift KS Glasboy 500
...ist die ideale Baustellen- und Werkstatthilfe zum vertikalen Verglasen und
Heben von großflächigen, schweren Scheiben und Fensterelementen etc.,
und das mit nur zwei Personen.
Mit dem KS Glasboy 500 können die Scheiben bequem vom
Glastransportwagen geholt und zum Einsatzort gebracht werden. Auch
enge Durchgänge sind kein Hindernis, da die Scheiben durch die
Gelenkigkeit der Saugvorrichtung annähernd seitwärts gedreht werden
können.
Am Einsatzort können durch die handbetriebene Hydraulikpumpe große
und schwere Scheiben genauestens einjustiert und leicht eingesetzt
werden.
Aber nicht nur zur Verglasung ist der KS Glasboy 500 ideal, er kann auch
in Werkhallen optimal eingesetzt werden. Durch seine enorme
Beweglichkeit in der Saugvorrichtung können Scheiben, Fenster etc. zur
weiteren Bearbeitung ebenso waagerecht auf Arbeitstische abgelegt oder
von Tischen abgehoben werden.
KS WIGA 2002 M
- für die bequeme und sichere Glaseindeckung von Wintergärten,
Vordächern und Atrien.
Der KS WIGA 2002 M ermöglicht rationelles Arbeiten und große Sicherheit
für die Monteure.
Telephone +49 5903 9390-0
Fax +49 5903 9390-93
Internet Address www.ksschulten.com
Booth Hall 11 G38
PRODUCT OVERVIEW
1309
glasstec
glasstec
Kaltun Mining Co.
Address Aydin-Mugla Karayolu 35 Km
09500 Cine-Aydin
Turkey
Telephone +90 256 7291600
Fax +90 256 7291615
Internet Address www.kaltun.com.tr
MyCatalog
Kanthal, ZN der Sandvik GmbH
Address Aschaffenburger Str. 7
64546 Mörfelden-Walldorf
Germany
Telephone +49 6105 4001-0
Fax +49 6105 4001-88
Internet Address www.kanthal.com
Booth Hall 11 E79
Booth Hall 13 A73
PRODUCT OVERVIEW
PRODUCT DETAILS
GlassTun
All glasstun products are suitable for use in the glass industry.With their low
titanium and iron oxide content, our products offer many advantages for
use as raw materials.All glasstun products are produced in mines located in
the Çine-Milas region and owned by KALTUN MADENC L K SAN.T C. A .
All glasstun products are manufactured, prepared and transported in
accordance with the KALTUN quality management system and checked
periodically.
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
Kanthal Super
Kanthal Super is the standard heating element in melting pot furnaces.
Kanthal Super, Superthal flat panels or silicon carbide heats feeder
forehearths, and Kanthal Super/Superthal is used for extra downdraw
heating.
Kanthal is the worlds leading supplier of silicon carbide elements to the
float glass industry.
Continuous furnaces for glass bending, toughening etc. are heated by
metallic wire elements or flexible Fibrothal heating modules
Kanthal Super Heating Elements
High power and long life electric heating elements for use up to very high
temperatures. Manufactured as ready-made elements, straight or bent in a
broad range of standard and special dimensions and shapes. Used mainly
in laboratory furnaces and production furnaces in the glass-, electronics-,
steel-, ceramics and heat treatment industry.
Six grades with specific features for use in new demanding applications
and atmospheres. Kanthal Super can now be used directly in nitrogen,
hydrogen, vacuum and mixtures of endogas and reducing atmospheres.
1310
glasstec
glasstec
Kararmaz Kalip San. ve Tic. Ltd. Sti.
MyCatalog
MyCatalog
PRODUCT OVERVIEW
Address Yenimahalle Cebeci Caddesi No. 76
Küçükkoy Gaziosmanpasa
34250 Istanbul
Turkey
Telephone +90 212 535-6616
Fax +90 212 535-6791
Internet Address www.kararmaz.com
Booth Hall 14 A22
02.03.08.04 Other screen printing machines
PRODUCT OVERVIEW
PRODUCT DETAILS
Mould for glass industry
Supplier of Moulds for glass industry, Press , Blow & Blow and Blow
process; top glassware, bottles and glass containers
http://www.kararmaz.com
Keraglass Engineering
Address Via Sassogattone, 7/B
42031 Baiso / RE
Italy
Telephone +39 0522 993027
Fax +39 0522 993030
PRODUCT DETAILS
Dryer Power Dry
Roller electrical drier.
This is a unique machine in its kind on the market. Its main features are:
small dimensions, high production capacity and reliability.
The standard configuration (just 7 metres of length) can fully dry silk-screen
printed or glazed glasses so that they can be stored immediately in a
vertical position to save a lot of space inside the company.
The speed of the ceramic rollers as well as the temperatures of the different
modules can be adjusted from 2 to 8 metres/minute directly from the
operator panel.
Thanks to its fully stainless steel construction and to the technical solutions
used, no maintenance operation is required, and the machine is highly
reliable even under the heaviest working conditions.
Internet Address www.keraglass.com
Roller glazing machine
Booth Hall 16 A39
1311
glasstec
glasstec
Roller glazing machine for flat glass panes of any shape.
This machine can apply a wide range of glazes (hot, cold, water-based
glazes, etc.) and any possible effect can be achieved: satin finish
(acidulated effect), double satin finish, masking, etc. with any colour
available on the market to meet any modern requirement in the furnishing
and architecture fields.
Each motor is electronically controlled through the operator panel so that
the operator can adjust the machine with an accuracy up to 0.1mm making
it possible to glaze glasses with any type of effect.
The machine is made up of stainless steel and the technical solutions
adopted ensure a quick colour change and an easy machine adjustment
depending on the different types of glaze used.
MyCatalog
MyCatalog
Khavar Bolour is specialized in all kinds of press moulds for different kinds
of glassware.
In order to meet the increasing demands of our respectable customers,
Khavar Bolour has planned an expansion project. The goal of expansion
project is production of glass moulds for containers to be used in
IS-machines and also press and blow machines.
King's Metal Fiber Technologies Co., Ltd.
Address 8F., 426, Linsen N. Rd.
10451 Taipei
Taiwan
Telephone +886 2 25210298
Khavar Bolour e Tehran Co.
Fax +886 2 25811922
Internet Address www.kingsfiber.com
Address No. 40.1st flour_Kashfian AL.-Sheik,
Bahaee.Ave-Mollasadra.St.
19936 Tehran
Iran
Telephone +98 912 350042
Booth Hall 12 B46
PRODUCT OVERVIEW
Fax +98 229338 2043
Internet Address
Booth Hall 13 D32
PRODUCT OVERVIEW
PRODUCT DETAILS
Knitted Fabric / XHK Series
100% stainless steel yarn to be knitted into the shape of fabric can be used
as the mold separator and formed cushioning material for the automotive
glass manufacturing process.
PRODUCT DETAILS
Knitted Sleeve / XHKS Series
Moulds for Glass productions
1312
glasstec
glasstec
MyCatalog
100% stainless steel yarn to be knitted into the shape of tubes can be used
as the packing material or roller covers within the automotive or hollow
glass manufacturing process.
Woven Fabric / XHW Series
100% stainless steel yarn to be woven into the shape of fabric can be used
as the mold separator or vacuum pad within the glass manufacturing
process.
MyCatalog
For decades now Körting, as providers of complete firing systems, fulfils all
equipment demands for the manufacturing of flat-, hollow- or technical
glass. Körting offers a port know-how based on over 80 years of experience
and accordingly the right firing system for every furnace.
Körting's service package includes project-based advice, calculations and
construction so that an object-related optimum flame position and
maximum economic heat transfer to the smelt is assured whilst still
observing the environmental aspect of the whole.
Consulting and engineering include the project-related designing of firing
systems according to the:
- Körting Underport System
- Körting Sideport System
Körting Hannover AG, Bereich W, Industrie- und Prozesswärme,
Feuerungstechnik
Address Badenstedter Str. 56
30453 Hannover
Germany
Telephone +49 511 2129-0
Fax +49 511 2129-223
Internet Address www.koerting.de
Booth Hall 13 A24
PRODUCT OVERVIEW
PRODUCT DETAILS
Firing systems for the glass industry
- Körting Throughport System
Following intensive consultations with the customer, Körting plots the best
suited burner arrangment for the individual plant in question. With due
observance being paid to furnace type, dimensions, fuel and technical
conditions, Körting then prepares a proposed equipment layout
- port cross-section
- crown- and floor angles
- number of lances and
- lance arrangement
under the aspect of a best possible combustion, energy conversion
between the flame and the melt and pollutant emission.
Burner equipments
· oil- and gas burner lances with high heat transfer effectivity and low
pollution(NOx) for regenerative melting tank applications for
- Underportinstallation
- Sideportinstallation
- Throughportinstallation (water cooled)
burner port design for an effective heat release in the melting tank under
consideration of ecological requirements (low pollution NOx)
· solid fuel combustion equipments (petrol coke) for regenerative melting
tanks
· oil- and gas burners with high heat transfer effectivity and low
pollution(NOx) for recuperative melting tank applications for combustion air
temperatures up to 800°C
1313
glasstec
glasstec
· oil- and gas-Duoblock burners for working ends, sand driers, tempering
furnaces and other auxiliary furnaces of the glass industry
· oil- and gas-Monoblock burners for sand driers, tempering furnaces and
other auxiliary furnaces of the glass industry
MyCatalog
MyCatalog
· design, supply, assembly, commissioning, service
KREISEL GmbH & Co. KG
· premix burners for feeders
· gas-Monoblock burners for the heating of annealing and decorating lehrs
Oil firing plants for melting tanks
· Station units for light- and heavy oil acc. to DIN 51603 or equivalent, with:
- reversal tracks for the change over of the fuel gas acc. to the
regenerative- reversal sequence
- reversal tracks for the change over of the atomising medium (compressed
air or steam) acc. to the regenerative- reversal sequence
- fuel flow control tracks with oil flowmeter and flow control valves
(pneumatic/ electric actuated) for the oil flow control
Address Mühlenstr. 38
02957 Krauschwitz
Germany
Telephone +49 35771 98-0
Fax +49 35771 60798
Internet Address www.kreisel.eu
Booth Hall 14 D54
- pressure control tracks for the oil pressure control
- online-oil heaters for heavy oil-elektric-, steam- or thermo oil- heated
PRODUCT OVERVIEW
- oil viskosity measurement/ - control
- oil operation pumps
- insert oil heaters for oil storage tanks
- oil discharge tracks for trucks or railway wagons
· electric/ electronic control equipment for the oil firing plant
01.04.11 Filter technologies (smoke and electrostatic)
· design, supply, assembly, commissioning, service
02.12.04 Purification of exhaust gases
Gas firing plants for melting tanks
·station units for fuel gases (natural gas, LPG, town gas, coke oven gas),
with
- reversal tracks for the change over of the fuel gas acc. to the
regenerative- reversal sequence
- fuel flow control tracks with gas flowmeter and flow control valves
(pneumatic/ electric actuated) for the gas flow control
PRODUCT DETAILS
Zellenradschleusen
Austrag & Dosierung von Gemenge u.a. durch kontinuierliches
Ausschleusen bei gleichzeitigem Luftabschluss
weiterhin: Doppelpendelklappen, Absperrschieber
- gas pressure control tracks with safety shut-off valve
- main gas safety track gas- emergency cut-off
- gas filtering track
- gas-/ air- mixture plants
- LPG vaporizing plants
· electric/ electronic control equipment for the gas firing plant
http://www.kreisel.biz
1314
glasstec
glasstec
Schlauchfilter
Gewebeascheider für diverse Stäube, auch Zyklonabscheider und
Naßabscheider
MyCatalog
MyCatalog
PRODUCT DETAILS
IPQ Intelligent Process and Quality Management
Keep the overview of your glassrecycling plant. The IPQ Manager monitor
and adjust your recycling process but also your quality automatically
SEPARATORS FOR GLASSRECYCLING
COLOUR - SEPARATORS
gekühlte Einlegerinnen
CSP - SEPARATORS
METAL SEPARATORS
NONSTANDARD SEPARATORS for:
LEAD-GLASS; HEAT-RESISTANT GLASS; CRT-GLASS
01.03.07 Refuse collection and glass recycling
KRS Recycling Systems GmbH
Address Voitschlag 14 A
94481 Grafenau
Germany
TURN KEY GLASSRECYCLING PLANTS
- ADVICE
- PLANNING
- ENGINEERING
- ASSEMBLING
Telephone +49 8552 5282
- START UP
Fax +49 8552 5160
- TRAINING
Internet Address
Booth Hall 12 E21
PRODUCT OVERVIEW
- SERVICE
01.03.09 Colour sorting (cullet)
COLOUR SORTER FOR GLASSRECYCLING
COLOUR SEPARATION FOR:
- FLINT GLASS CLEANING
- AMBER GLASS RECOVERY
- COLOUR SORTING OF MIXEDGLASS
01.03.09 Colour sorting (cullet)
- CSP SORTING
1315
glasstec
glasstec
KSO-GOBI Ofenbau GmbH
Address Am Güterbahnhof 21
47608 Geldern
Germany
Telephone +49 2831 86038
Fax +49 2831 87589
Internet Address www.kso-gobi.de
MyCatalog
Lahti Precision Oy
Address Ahjokatu 4A
15801 Lahti
Finland
Fax +358 3 8294100
Internet Address www.lahtiprecision.com
Booth Hall 9 B31
Booth Hall 15 A34
PRODUCT OVERVIEW
PRODUCT OVERVIEW
01.03.01 Crashing and grading
03.10.03.02.05 Glass smelting/fusion technology
MyCatalog
03.13.05 Glass sinks
03.13.06 Glass tiles
PRODUCT DETAILS
HRF 6
Optimum heating technique electrical infra-red elements
Easy to use, easy loading, free of pollution
Temperature control by standard micro-processor
Full kiln insulation, two-layer insulation
PRODUCT DETAILS
Batch Plants and Weighing Systems
Lahti Precision's (formerly Raute Precision) two goals in the conception and
realisation of a batch plant are to achieve the highest consistent quality of
the mixed batch going into the furnace and to ensure the long-term
day-to-day operational reliability of the plant.
High quality glass is dependent on the accuracy of dosing of each raw
material and the adequate mixing of the materials including any colorants
or additives which may be required. By using high quality load cells,
weighing indicators, hopper scales and dosing devices, controlled and
1316
glasstec
glasstec
linked up by a sophisticated rapid response control system, - all of own
manufacture, - Lahti Precision can guarantee that a consistently
homogeneous mix will be available in the furnace charger.
Lahti Precision's plant engineering philosophy is to achieve simple material
flow, using gravity and as few changes of direction as feasible, with a
minimum number of pieces of equipment. The objectives are high reliability
and low maintenance costs. Lahti Precision applies the same principles
whether the batch plant or weighing system is for the production of float,
hollow and fibre glass although the tolerances and hence the overall cost
may be different according to the application.
Lahti Precision has always been particularly attentive to the conditions
within the batch plant so as to provide a safe low-dust working environment
for the operating and maintenance staff and for the greater reliability of the
plant.
MyCatalog
MyCatalog
Langendorf GmbH
Address Bahnhofstr. 115
45731 Waltrop
Germany
Telephone +49 2309 938143
Fax +49 2309 938190
Internet Address www.langendorf.de
Booth Open area at Hall 13 13-01
PRODUCT OVERVIEW
Lane & Sons Ltd., George
Address Bannerley Road, Garretts Green
B33 OSL Birmingham
United Kingdom
Telephone +44 121 7845525
Fax +44 121 7836988
Internet Address www.georgelane.co.uk
Booth Hall 14 C02
PRODUCT DETAILS
Semitrailer with half pipe aluminium tipping box, type SKA-H
Absolute lightweights are Langendorf tipping semitrailers SKA-HS with
aluminium half-pipe tipping box. In connection with the well-tried chassis
frame made of fine corn steel Langendorf proves impressively that a low
dead weight does not need to be based on an aluminium chassis frame.
Vehicles of this type have proved their excellent features already in a lot of
countries.
PRODUCT OVERVIEW
PRODUCT DETAILS
Furnace Belts
Heat Treatment
Furnace Manufacturers
1317
glasstec
glasstec
Langendorf GmbH
MyCatalog
MyCatalog
PRODUCT DETAILS
45731 Waltrop
Germany
Telephone +49 2309 938143
Fax +49 2309 938190
Internet Address www.langendorf.de
Flachtransporter mit seitl. Tranportbank, A-Gestell und Bord
Ausführung:
=>Fahrgestell komplett feuerverzinkt
=>A-Gestell in Alu-Schweißkonstruktion
=>Ladungssicherung durch Spannleisten mit Schiebemechanismus
=>lieferbare Längen: von 2.690 mm bis 6.000 mm
=>wahlweise mit seitl. Transportbank, Bordwänden oder A-Bock
=>eingelassene C-Schienen auf Wunsch
Booth Hall 13 A89
LAT Antriebstechnik GmbH & Co. KG
PRODUCT OVERVIEW
PRODUCT DETAILS
Langendorf Floatliner
Address Venneweg 28
48712 Gescher
Germany
Telephone +49 2542 910-0
Fax +49 2542 910-290
Internet Address www.neudecker-jolitz.de
Lansing Fahrzeugbau GmbH
Address Winterswijker Str. 120
48691 Vreden
Germany
Telephone +49 2564 930530
Fax +49 2564 930550
Internet Address www.lansing.de
Booth Hall 11 B85
Booth Hall 14 E02
PRODUCT OVERVIEW
PRODUCT DETAILS
Flachmotoren
Drehstrom und EinphasenwechselStrommotoren in Flachbauweise.
Produktbeschreibung
PRODUCT OVERVIEW
Durch ihre kompakte und Platz sparende Bauweise sind Flachmotoren
ideal zum fräsen, kappen, ritzen, bohren, sägen, zerspanen oder schleifen
sowohl in komplexen Maschinensystemen, in denen hohe Ansprüche,
besonders an die Laufgenauigkeit und Leistungsstärke der Antriebseinheit
1318
glasstec
glasstec
gestellt werden, als auch in einfachen Maschinensystemen wo es um eine
günstige und zuverlässige Antriebslösung geht. Unsere Flachmotoren
laufen auch unter schwierigsten Bedingungen störungsfrei.
In der Serienausführung werden die Motoren für 50/100/150 oder 200Hz
ausgelegt. Hierbei decken sie einen Leistungsbereich von 0,5 kW bis 50
kW ab.
Die Flachmotoren werden in drei Hauptgruppen unterteilt:
K62, K75 und K112. Innerhalb dieser Hauptgruppen gibt es weitere
Untergruppen, welche eine sehr individuelle Auslegung der Motoren
zulässt.
Diese sind vollkommen geschlossen, und oberflächengekühlt. Sie können
je nach Bedarf für die Schutzart:
IP 54, IP 55 oder IP 65 ausgelegt werden.
Durch die Lebensdauerschmierung der Lager sind Flachmotoren nahezu
wartungsfrei und bedienungsfreundlich.
MyCatalog
MyCatalog
Lattimer Ltd
Address Shakespeare Street
PR8 5AP Southport
United Kingdom
Telephone +44 1704 535040-223
Fax +44 1704 541046
Internet Address www.lattimer.com
Booth Hall 13 E57
PRODUCT OVERVIEW
Reibradgetriebemotoren
Mechanisch stufenlos verstellbarer Antrieb mit reibschlüssiger
Kraftübertragung für horizontale und vertikale Anordnung, lieferbar in neun
Baugrößen.
Produktbeschreibung
Nimmt die Drehzahl im Abtrieb ab, steigt das Drehmoment dies ist das
Grundprinzip der Reibradgetriebe. Anders als beim FU-Betrieb bleibt die
Motorleistung bei abfallender Drehzahl konstant, und das Drehmoment
steigt. Durch die stufenlose Verstellbarkeit des Reibradgetriebes sind
sowohl Untersetzungen, als auch Übersetzungen möglich.
Reibradgetriebe finden ihren Hauptanwendungsbereich in der Textilund Lebensmittelindustrie.
Die Kraftübertragung erfolgt durch ein bzw. zwei hintereinander
angeordnete Reibradpaare.
Die zur Leistungsübertragung notwendige Anpresskraft wird
belastungsabhängig von einer Nockenkurve erzeugt. Den für den Anlauf
notwendigen Anpressdruck leitet eine Druckfeder ein. Durch Betätigung der
Stelleinrichtung ändern sich die wirksamen Durchmesser von An- und
Abtriebskegel. Hierdurch wird eine Drehzahländerung erreicht.
Durch das Motox® - Baukastensystem ist es möglich, das Reibradgetriebe
mit weiteren Komponenten zu kombinieren
PRODUCT DETAILS
Mould Holders
A wide range of Holders cover Single Gob operation on all machine centres
from 4 1/4" ctr. Type E machine to 6 1/4" ctr. Model C Type EF, including
Scissor and Non-scissor type linkage, for most major machine
manufacturers. The range of DG; TG and QG holders and all the SG
holders are manufactured from high quality ductile iron castings with
hardened and ground steel bushings fitted as standard.
Pushers (Sweepouts)
The unit of choice by a vast majority of the world glass industry, the
Lattimer Pusher is designed specifically for speed, reliability and precision
of operation, the perfect companion to the Lattimer Belt Arm. New
developments will ensure lighter weight, reduced inertia on the turntable
and greater precision of glassware handling from deadplate to machine
conveyor.
1319
glasstec
glasstec
MyCatalog
COMPANY NEWS
Lattimer with over 20 years experience in the design and manufacture of variable
equipment will be launching not one but three new products at Glasstec Dusseldorf in
October.
The latest addition to their take out range is designed for the Emhart 400 series servo
electric unit as specified in the latest NIS machines. Featuring innovations including dual
outboard bearing Tong Head shaft support, duplex input bearings, precision lightweight 2
piece aluminium alloy sealed casing and simple yet precise in situ belt adjustment.
A new inclined twin piston sweepout made from automotive grade aluminium alloy
reducing the overall weight by approximately 35%. The linear adjustment mechanism,
has been repositioned from a side location to the centre of clamping and rotation.
Designed with a single standard tong holder cylinder that can be installed on a range of
mould centre specific heads to give the desired machine setup, Lattimer s new modular
tong head products offer flexibility, precision, long life and reduced cost through fewer
parts on the shelf.
Manufactured from aerospace grade aluminium alloy billet, modular tong heads are both
lightweight and very strong. A unique mechanical dual fixing qualifies the tong holder
positioning and air seal. The closed design supports both the industry standard cast iron
tong holders and the latest light weight anti wink design.
Also available in an X-Y precision-adjustable configuration to further reduce container
rejection through ware handling, Lattimer modular tong heads offer a new and innovative
solution to improve and simplify the bottle manufacturing process.
Messe Düsseldorf
for Exhibitors
MyCatalog
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Lincoln GmbH, Zentralschmiersysteme
Address Heinrich-Hertz-Str. 2-8
69190 Walldorf
Germany
Telephone +49 6227 33-0
947-5004
Fax +49 6227 33-259
947-2015
Internet Address www.lincolnindustrial.de
Booth Hall 13 D41
PRODUCT OVERVIEW
PRODUCT DETAILS
Multi-zone Lubrication System
1320
glasstec
glasstec
For the demand based individual lubricant requirements of each zone on a
glass machine.
Lincoln Multi-zone systems offer an economical, resource conserving and
environmental conscious solution.
Lincoln centralized lubrication systems supply all areas of machines and
systems with an exactly matched quantity of lubricant. As a result, your
valuable equipment is optimally protected with a minimal amount of
lubricant and all negative impacts associated with under lubrication are
eliminated.
The demands of individual zones of machines in glass production and
processing vary in the type of lubricant used and the amount required.
With conventional systems, these conditional requirements are only
partially taken into consideration. A differentiating lubricant supply,
dependent on the demand of each zone is not foreseen. The zones are, on
the other hand, lubricated with adjustable injectors set at the required
quantity. However, since all zones are connected to one mainline, all
injectors, and the connected lubrication points, are supplied with lubricant
with every pump cycle. And the result is an increased lubricant usage.
Conversely, the Lincoln Multi-zone system differentiates between the low
and high demand zones of the glass machine and supplies the amount of
lubricant accordingly. As a result, the lubricant quantities are matched to
the requirements of each lubrication point, and the amount is kept to a
minimum.
A further advantage is provided by the control logic that is based on the
Lincoln Multi Controller model LMC-1 that is integrated in the multi-zone
system. An integrated Field-bus module enables a connection to all
common Bus type systems.
As a result, all prerequisites are met for the ideal lubricant supply to the
lubrication points in accordance with the production process. A production
change between two different glass
containers that results in different lubrication requirements on the machine
can now be automatically performed with ease.
The Lincoln Multi-zone system also offers the operator the possibility of
running synthetic or mineral based oils in parallel. Consequently, the
operator can use a high-grade synthetic oil for areas that are highly
strained, and a less expensive, low-grade mineral oil for less strained
zones.
MyCatalog
MyCatalog
Linde AG, Linde Gas Division
Address Seitnerstr. 70
82049 Pullach
Germany
Telephone +49 89 7446-0
Fax +49 89 7446-1230
Internet Address www.linde-gas.com
Booth Hall 13 A42
PRODUCT OVERVIEW
PRODUCT DETAILS
Helium
The air constitutes of 78 percent nitrogen, and 21 percent is oxygen, - one
of the most common elements on earth, 85 percent of the oceans and 60
percent of the human body is oxygen.
One percent of the air is Helium is the second lightest element and the one
with the lowest boiling point, -268,9°C. Helium is recovered most
cost-effectively from natural gas. Long-term contracts guarantee access to
sources in the USA, Europe and North Africa.
Linde is for the moment building a helium liquefaction plant in Skikda on the
east coast of Algeria, which will go on stream in 2005.
1321
glasstec
glasstec
http://www.linde-gas.com/international/web/lg/com/likelgcomn.nsf/docbyalias/prod_ig
MyCatalog
MyCatalog
Logicon Engineers Pvt. Ltd.
Hydrogen
Hydrogen is the lightest of all elements and constitutes 90 percent of the
known universe. The gas may be obtained by means of a steam-reformer
from steam, natural gas or other light hydrocarbons. Refineries and
electrolytic processes employed in chlorine chemistry also generate
hydrogen-rich gases from which the hydrogen can be recovered. All these
methods are used by us, e.g., in Leuna, Buna, and Bitterfeld in Germany,
and the Milazzo refinery in Sicily.
Liquid hydrogen is manufactured by liquefaction at -253°C and is
transported in its liquid state, reducing transport costs.
Our Ingolstadt plant is Germany's sole industrial plant for hydrogen
liquefaction.
http://www.linde-gas.com/international/web/lg/com/likelgcomn.nsf/docbyalias/prod_ig
Address 45-48 Mahavir Centre Sect. 17, Vashi
400703 Navi Mumbai
India
Telephone +91 22 78927-51
Fax +91 22 78927-50
Internet Address www.logiconengineers.net
Booth Hall 13 B68
PRODUCT OVERVIEW
Oxy Fuel burner technology:
Besides gas supply, Linde can offer for all gas melting surfaces heated with
fossil fuels applications technology consisting of Oxy Fuel burner systems
and control systems for oxygen and fuel.
PRODUCT DETAILS
Glass Industry
The range of products available from Linde includes all types of lances and
burners, especially (as a result of more exacting demands for Oxy Fuel
burner technology) controllable Oxy Fuel burners.
These are characterised by the following:
* Adjustment and control possibilities for changing the flame shape, the
flame length, the flame position and the NOx formation with the same
burner power.
* Changeable nozzle inserts for adapting to the required performance
range.
* An adjustable burner holder for obtaining the optimum burner position.
* All the equipment with quick-action fixtures for improved handling.
http://www.glassglobal.com/directory/glass/profile/document.asp?ID=32301&qry=&char=&country=&category=&page=
1322
glasstec
glasstec
Logicon offers the following products for the Glass Industry:
Ease of handling and transportation of bottles, reducing breakage during
Annealing and Decorating Lehr
Cold-end and Hot-end Coating Equipments
Single-line Conveyors
Combustion and Control Equipments for Melter and Fore Hearth
Annealing and Decorating Lehrs
Advantages Low fuel consumption per ton of glass
Possibility to use any source of energy, viz. Gas, Oil, Electricity
Modular construction, enabling easy shipment and installation
Rigid and channel-type construction, resulting in very low maintenance
cost and long product life
Efficient control system, using Siemens / Alan Bradley or similar controllers
PLC and standardized hardware
Ideal circulating pattern, using efficient re-circulating fans
Strong pre and post sales service by skilled manpower
Configuration available upto belt width 5500 mm
Cold-end and Hot-end Coating Equipments
Designed to improve mechanical properties of bottles
transportation
The primary objective of enhancing burst strength is accomplished
immediately.
MyCatalog
MyCatalog
At the production line, excellent container flow is ensured
Single-line Conveyors
Customised solutions to fit the inspection and packing requirement
Suitable to install any type and make of inspection machine
Designed for high speeds, including Tandem machine output
Lines designed for fully automatic operation, with bi-direction tables for
accumulation and unloading
Can be designed for any size and shape of bottles, including perfumery
and vials
Modular construction, allowing upgrades / modifications in the future
All components used are of standard make and reputed brands and strong
pre and post sales service by skilled manpower
Combustion and Control Equipments for Melter and Fore Hearth
Possibility to use any form of energy, i.e. Gas, Oil
Designed to suit all burner applications
Equipped with features such as regulation, safety, flow control and flow
reversal
Armed with pumping, heating and straining units, for heavy oil or with
thyrister controlled electrical heating
1323
glasstec
glasstec
Logistic System Pichler GmbH
Address Heinrichsbrunn 2
4310 Mauthausen
Austria
Telephone +43 7238 4215
Fax +43 7238 29249
MyCatalog
MyCatalog
clip.
All rolling glass racks are equipped with roller bearing. For securing glass
panes all
RUNNER
types can be supplied with a height-adjustable
GLAS FIX
Providing a huge variety of
standard types
we are able to cover a multitude of application areas.
Internet Address www.logistic-system.at
Löwinger GmbH, Glasbearbeitungsmaschinenbau
Booth Hall 12 E16
PRODUCT OVERVIEW
Address Reichenbacher Str. 16
97702 Münnerstadt
Germany
Telephone +49-9733-8140-0
Fax +49-9733-8140-20
PRODUCT DETAILS
Blower trolley
Used for storing and loading different sizes of single panes as easy as
possible. Optionally with 50 compartments (or 60 for Type FW60) which are
separated by plastics coated split rods. A plastic plate with end-to-end
milled slots (width 12 mm) provides save transport and stocking. Type VHK
is due to it's construction well suited for curved, oval or round glass or
mirrors. High load capacities and ball bearing rolls allow easily movement.
Surface of frame is coated in RAL3020.
Internet Address www.loewinger.de
Booth Hall 14 A23
PRODUCT OVERVIEW
Glass Transport Rack
Glass transport frames are used for internal and external transport of flat
glass. They are exactly tailored to customer's needs and can save a lot of
time and money.
A rugged steel tube construction, special glass locking and rubber profiles
assure save and secure glass transportation.
03.05.06 Laboratory glass
PRODUCT DETAILS
Disposable syringe machine
BULL
-Series:
To secure glass panes we're using belt strips which can be attached in a
ready-made grid (bottom). The belt is placed upside and clamped by a belt
1324
glasstec
glasstec
MyCatalog
Type P3/K/200-SPZ-R/S1
MyCatalog
technological steel construction
consultation and planning with our specialists
M.E. SCHUPP Industriekeramik GmbH & Co. KG
Double capillary blowing machine with turning facility
Type T4 B7 A-420/ S.D.W.
Address Neuhausstr. 4-10
52078 Aachen
Germany
Telephone +49 241 93677-0
Fax +49 241 93677-15
Internet Address www.schupp-ceramics.com
LWN Lufttechnik GmbH
Booth Hall 13 D37
Address Hühndorfer Höhe 7
01723 Wilsdruff
Germany
Telephone +49 35204 2708-0
Fax +49 35204 2708-10
Internet Address www.lwn-lufttechnik.de
Booth Hall 13 A57
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT DETAILS
M.E.SCHUPP® MolyCom®
Electric Heating Elements MolyCom® (MoSi2) up to 1,800°C. Made in
Germany
PRODUCT DETAILS
Complete ventilation systems
for glass industry
dust exhausting equipment for other sectors of industry
general exhausting systems
http://www.high-temperature-blog.com
1325
glasstec
glasstec
M.E.SCHUPP® MolyTec 11.09.2008
Electric Heating Panels and Cylinder Systems (MoSi2 + Al2O3 - PCW
Insulation Board) up to 1650°C. Engineered and Made in Germany.
MyCatalog
MyCatalog
http://www.schupp-ceramics.com
M.E.SCHUPP® MolyCom®
Germany
M.E.SCHUPP® UltraBoard
Insulation boards, shapes & cylinder from polycristalline Al2O3 Wool with
an application temperature form 1,250°C to 1,850°C.
http://www.high-temperature-bog.com
M.E.SCHUPP® MolyTec
Electric Heating Panels and Cylinder Systems (MoSi2 + Al2O3 - PCW) up
to 1650°C. Engineered and Made in Germany.
http://www.high-temperature-blog
M.E.SCHUPP®-ZirconKnife
Ultra Sharp Ceramic Knifes Made of Zirconia as Promotional Corporate Gift
for your Customers
1326
glasstec
glasstec
for your Customers
MyCatalog
MyCatalog
for your Customers
M.E.SCHUPP®MolyCom®
Electric Heating Elements MolyCom® (MoSi2) up to 1,800°C.
Made in Germany
to 1650°C. Engineered and Made in Germany.
M.E.SCHUPP®MolyCom®
1327
glasstec
glasstec
Germany.
MyCatalog
MyCatalog
ThermoTube
Thermocouple Protection Tubes (Al2O3) up to 1,800°C
to 1650°C.Engineered and Made in Germany.
for your Customers
1328
glasstec
glasstec
MyCatalog
COMPANY NEWS
Die M.E.SCHUPP Industriekeramik GmbH & Co. KG, Anbieter von
Schlüsselkomponenten für die Hochtemperatur-Öfen, präsentiert auf der Glasstec
erstmals elektrische Heizelemente aus MoSi2 für Schmelzöfen bis 1850°C aus der
eigenen Produktion (Halle 13, Stand D37). Die unter dem Markennamen
Molycom®-Ultra erhältlichen Heizelemente werden bereits seit Anfang des Jahres in
Aachen gefertigt. M.E.SCHUPP® ist damit der einzige Hersteller von
MoSi2-Heizelementen in Deutschland und der zweite in Europa. In Düsseldorf stellt der
weltweit agierende Anbieter von Hochtemperatur-Komponenten die Heizmodule Made
in Germany für elektrisch betriebene Schmelzöfen und wannen für Labor- und
Industrieanwendungen nun erstmals einer größeren Öffentlichkeit vor. Gezeigt werden
dem Anlass entsprechend praktische MolyCom®-Anwendungen für die Glasindustrie.
Dazu gehören auch integrierte Paket-Lösungen, etwa MolyTec-Heizelemente, die aus
MolyCom®-Heizelementen und AL2O3-Isolierboards bestehen, oder komplette
Ofenmodule, die M.E.SCHUPP® im Kundenauftrag fertigt.
Neben dem Premierenprodukt breitet M.E.SCHUPP in Düsseldorf das gesamte
Produktportfolio für den Bau und den Betrieb von Glasschmelzanlagen aus. Am
Messestand finden die Besucher Komponenten und Materialien aus den
Glasstec-Produktbereichen Feuerfestmaterialien, Vorherdtechnik,
Glasschmelzhafentechnik, elektrisch beheizte Systeme sowie Dämm- und Isolierstoffe.
Mit dem Produktionsstandort Aachen bietet M.E.Schupp der Glasindustrie in Europa
eine zweite Quelle für MoSi2-Heizelemente. Als Made-in-Germany -Produkte
garantieren sie eine kontinuierlich hohe Qualität, die sich bei elektrischen Heizelementen
an Kriterien wie einem konstanten elektrischen Widerstand, einer homogenen
Maximaltemperatur, hoher Temperaturwechselbeständigkeit und langer Lebensdauer
bemisst. Die Produktion gemäß den etablierten Industriestandards erlaubt den Einsatz
von neuen und alten Elementen nebeneinander sowie den gleichzeitigen Betrieb von
Molycom®-Ultra und Heizmodulen anderer Hersteller.
Molycom®-Ultra wird in allen Durchmessern von 3/6 mm bis 12/24 mm mit bis zu zwei
Metern Länge produziert. Die Hot-Bending-Technologie, die nur wenige Fertiger weltweit
beherrschen, erlaubt auf Kundenwunsch die Realisierung komplexer
Heizelement-Geometrien.
Über M.E.SCHUPP®
M. E. SCHUPP® bietet weltweit Komponenten und Materialien für den Bau und Betrieb
von Hochtemperaturöfen aus einer Hand. Unternehmen der Anwenderindustrien
Schmuck, Glas, Halbleiter, Keramik und Dental sowie Forschungseinrichtungen erhalten
hier alles, was sie für elektrisches Beheizen, thermisches Isolieren und
Temperaturmessung sowie für das Kleben, Versiegeln und Beschichten von
mineralischen, keramischen und metallischen Hochtemperaturkomponenten benötigen.
Angeboten werden ebenfalls Hilfsmittel für den Brennprozess . Mit einem sehr günstigen
Preis-Leistungs-Verhältnis aller Produkte, umfassendem, sehr persönlichem Service und
effizienter Logistik spricht M. E. SCHUPP® sowohl kleine und mittelständische
Unternehmen als auch Konzerne an. Entsprechend qualifizierte Mitarbeiter aus zwölf
Nationen erarbeiten auf der Basis des Produktportfolios die jeweils optimale Lösung für
MyCatalog
den gegebenen Kundenbedarf.
M. E. SCHUPP® arbeitet in einem dichten Netzwerk von Hochtemperatur-Unternehmen,
deren Leistungen und Produkte sich ergänzen und die sich in Entwicklung und
Marketing unterstützen.
Mehr Informationen
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
1329
glasstec
glasstec
M.T. Forni Industriali S.r.l.
Address Via Pialoi, 104
30020 Marcon / VE
Italy
Telephone +39 041 4569356
Fax +39 041 4567002
MyCatalog
Maquinas Argentinas del Vidrio S.A. (Mavsa)
Address San Antonio 1119
C1276 ADQ Capital Federal
Argentina
Telephone +5411 43029900
Fax
Internet Address www.mtforni.com
Internet Address www.mavsa.com.ar
Booth Hall 14 E78
Booth Hall 13 C01
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
01.06.01 Gob feeder
PRODUCT DETAILS
PRODUCT DETAILS
01.06.01 Gob feeder
Feeders
The Feeders are designed a constant weight, a continuous series of
uniformly sized and shapes gobs of molten glass to forming machine for
production of containers and other types of glass wares.
TANK FURNACES
U-Melter, gas fired, 12sqm, for clear
MAVSA Press Machines
1330
glasstec
glasstec
MyCatalog
MyCatalog
MAVSA Press Machines offers a complete production range to the
Worldwide Glass Tableware Manufacturers. We also offer:
Free Press Technology Production.Ring Press Technology
Production.Complete Press Line Manufacturing from theForehearth till the
Stacker Conveyor & Press Mould Equipment.Turn Key Installation and
Manteinance.
MAXON GmbH
Mario Argiro s.r.l.
Address Zona Industriale, 46
66050 San Salvo (CH)
Italy
Telephone +39 0873 343250
Fax +39 0873 341463
Internet Address www.argirogroup.com
Booth Hall 14 B20
PRODUCT OVERVIEW
Address Luchthavenlaan 16
1800 Vilvoorde
Belgium
Telephone +32 2 2550909
Fax +32 2 2518241
Internet Address www.maxoncorp.com
Booth Hall 13 F78
PRODUCT OVERVIEW
02.10.01 Washing machines and equipment
PRODUCT DETAILS
Robot glass pick-up device
PRODUCT DETAILS
MAXON oxygen burners
As the original innovator of industrial oxy fuel combustion, you'd expect
nothing less from MAXON than continuous innovation. With some of the
industry's lowest NOx oxygen burners to the best heat transfer uniformity,
the Oxytherm family of industrial burners and natural gas burners is your
smart choice for value, reliability, and performance. Year after year,
Oxytherm heats furnaces, kiln, melters, and other applications with durable,
maintenance free ease.
http://www.maxoncorp.com
1331
glasstec
glasstec
MyCatalog
COMPANY NEWS
Available from 2008, the new MAXON Series 8000 Air Actuated Valve for liquid service
provides greater efficiency for our customers.
This distinctive Series 8000 valve is endowed with all the features of MAXON s 8000
rising stem valve.
The high maximum operating pressure differentials (MOPDs) and the swinging gate seat
design for durable service in liquid stream creates the ideal combination for maximum
cost effectiveness.
As is the custom with our Series 8000 valve line, this unique product offers a compact
design with integral solenoid, quick exhaust and position switches that protects
components, simplifies piping and minimizes space requirements.
MyCatalog
Merkad Makina Kalip San. ve Tic. Ltd. Sti.
Address Gumussuyu Cad. Karacabey Sok.
No:10
34020 Istanbul
Turkey
Telephone +90 212 4830710
Fax +90 212 4830727
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Internet Address www.merkad.com
Booth Hall 14 A03
PRODUCT OVERVIEW
PRODUCT DETAILS
Basket H28
1332
glasstec
glasstec
MyCatalog
MyCatalog
New type 5inch H-28 Blow Mold Holder
Engraved
O-90 AND H28 Type Neck Ring Holder
H-28 5inch Standart Blow Mould Holder
Press & Blow Moulds
1333
glasstec
glasstec
MyCatalog
MyCatalog
Merker GmbH, Kurt
Address Elsterstr. 6
93309 Kelheim
Germany
Press Group
Telephone +49 9441 3355
Fax +49 9441 12815
Internet Address www.merker-kmk.com
Booth Hall 9 E32
PRODUCT OVERVIEW
Stem Group
02.01.02 Glass saws
02.01.05 Sawing machines and rim polishing machines
02.03.03 Matting/Supercalendering/etching/sand blasting technologies
Stemware
02.03.05 Polishing technology
02.11.01 Tools
03.10.03.01.01 Grinding technology
03.10.03.01.02 Grinding and polishing materials
03.10.03.01.03 Blasting technology
03.10.03.02.13 Creative glass products (glass art)
04.01.03 Tools and smelting equipment for glass makers
04.02 Cutting, grinding and drilling tools
07.02 Specialised Publishers
1334
glasstec
glasstec
MyCatalog
COMPANY NEWS
Ursula and Gernot Merker attend the 5th International Symposium of Engraved Glass in
Kamenicky Senov in Czech Republic 8th-14th September 2008
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
MyCatalog
Ursula und Gernot Merker nehmen an dem 5. Internationalen Symposium Graviertes
Glas in Kamenicky Senov in der Tschechischen Republik 8.-14. September 2008 teil.
Mehr Informationen
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
1335
glasstec
glasstec
Merkle International, Inc.
Address 100 Perry Street
61036 Galena, IL
USA
Telephone +1 815 777-2100
Fax +1 815 777-2106
Internet Address www.merkleintl.com
Booth Hall 13 A37
PRODUCT OVERVIEW
PRODUCT DETAILS
MyCatalog
MyCatalog
CONSIDER OUR OPTIONS
As part of our continued commitment to customizing our product for your
needs, Merkle is pleased to offer a variety of equipment options, including
AC or DC motors, controllers, air or water cooling on pan and pusher bar,
center-cooler mounting provisions, stairs, ladders, a variety of clutches or
couplings, and tractive devices for positioning the unit.
Merkle Bay-0-Seal
The Merkle Bay-0-Seal is comprized of blocks of cast and fired sillimanite
refractory assembled in a steel frame and suspended above the spout,
covering the entrance to the tin bath. This design provides an excellent
against atmosphere discharge from the tin bath.
The Bay-0-Seal can be raised and moved during spout changes. The
Merkle Bay-0-Seal, with its unique design can usually be put back into
service, where other solutions may not withstand thermal cycling.
Nitrogen can be introduced through the side or roof blocks of the Merkle
Bay-0-Seal, for operational flexibility.
Merkle has been supplying Bay-0-Seal systems for over 30 years. Let our
experience work for you. The Merkle Bay-0-Seal can both improve
production efficiency and complement the long-campaign furnace.
Métal Industriel de Chauny
THE MERKLE MODULAR CHARGER
The newest in our line of state-of-the-art blanket batch chargers offers
impressive solutions to many of your charging challenges. A small version
of our Single Pan machine, the modular charger can be made in widths
from 1-2 meters, to be used for very small furnace openings, or in sets to
accommodate any doghouse application.
Easier Handling
Manageable modules move into and out of position more easily than with
the larger machines.
Programming of Batch Distribution
With an electronic synchronizer, multiple units can be configured to
produce feed profiles unavailable with wider units. Pan separations of
25mm give the modular unit the ability to retain batch log formation that is
otherwise available only on larger machines.
Lower Impact of Inactive Machine
Each unit is small so that removal of one module from service has
temporary minor impact on profile and negligible effect on batch feed rate.
Address 136-142, avenue Jean Jaures
02300 Chauny
France
Telephone +33 3 23391510
Fax +33 3 23391515
Internet Address www.metalindustriel.com
Booth Hall 14 B50
PRODUCT OVERVIEW
1336
glasstec
glasstec
PRODUCT DETAILS
Round bars
Round bars in aluminium from Dia 20 mm to 450 mm
Round bars in cast iron FT25 and GS from Dia. 20 mm
to 400 mm
Round bars in red copper Cua1, Cub1, Cuc1
Round bars in Copper lead CuPb10,CuPb15, from Dia.30 mm to 150 mm
MyCatalog
MyCatalog
The products we make are essencially moulds and acessories for every
kind of packing glass.
Sophisticated perfumery packing moulds are included in our products
gamut.
Metavil, Lda
Address Trav. das Andorinhas, Benta, Apt. 1
37
2431-902 Marinha Grande
Portugal
Telephone +351 244 572960
Fax +351 244 572968
METRA
Address Route d'Eu
76340 Blangy-sur-Bresle
France
Telephone +33 2 32974400
Internet Address www.metavil.pt
Fax +33 2 32974449
Internet Address www.metra.fr
Booth Hall 14 B12
Booth Hall 13 E19
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT DETAILS
PRODUCT DETAILS
moulds and acessories
Formen
Accessoires
1337
glasstec
glasstec
Mistrello Officine S.r.l.
Address Via dell´Artigiano, 13
35040 Ponso (Pd)
Italy
Telephone +39 0429 95046
Fax +39 0429 657825
Internet Address www.mistrello.it
MyCatalog
Mixer Systems
Address 190 Simmons Ave.
53072 Pewaukee, Wisconsin
USA
Telephone +1 262 6913100
Fax +1 262 6913184
Internet Address www.mixersystems.com
Booth Hall 16 B73
Booth Hall 13 D14-7
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
PRODUCT DETAILS
Horizontal Shaft Mixer
The first choice of heavy-duty concrete product producers, Praschak
Horizontal Shaft Mixers are recognized for their quality output and durable,
long life operation. Now available with spiral blades or paddles for wet or
dry materials.
CLASSIFICATORI PER GRANDI LASTRE (6000X3210)
CLASSIFICATORI PER GRANDI LASTRE
AutomaticiSemiautomaticiManuali
CARICATRICI GL6000
Planetary Mixer
Planetary Mixers from Mixer Systems are the only ones of their type
designed and manufactured in the U.S.A. The patented design produces a
unique "counter current" mixing action, resulting in a fast, homogeneous
mix in as little as 30 seconds.
CLASSIFICATORI PER 2 MEZZE LASTRE
1338
glasstec
glasstec
MyCatalog
MOCAP Deutschland Ltd.
Address Eisenstr. 4
44145 Dortmund
Germany
Telephone +49 231 4461693
MyCatalog
and at a reasonable price.
MOCAP produces plastic and rubber parts for all kinds of the industry.
http://www.mocap.co.uk
MOPAVID, S.L.
Fax +49 231 4461694
Internet Address www.mocap-deutschland.de
Booth Hall 10 B39
Address c/ Ramón Martí Alsina, 56, Apt. 2 83
08911 Badalona
Spain
Telephone +34 93 3847180
Fax +34 93 3846850
PRODUCT OVERVIEW
Internet Address www.mopavid.com
04.05 Protection devices
PRODUCT DETAILS
Booth Hall 14 C12
PRODUCT OVERVIEW
Protective Corner Covers
Help protect most surfaces including glass and mirrors against chipping
and breaking during shipment or storage with MOCAP's vinyl corner
covers. These protective covers will provide a tough, durable protective
covering over almost any flat and formed application. MOCAP can vary
length, wall thickness and colour to meet your specifications. In additon to
the standard sizes, MOCAP can also produce "tailor-made" parts quickly
and at a reasonable price.
MOCAP produces plastic and rubber parts for all kinds of the industry.
http://www.mocap-deutschland.de
PRODUCT DETAILS
Moulds for the automatic glass industry
Moulds for the automatic glas industry in Cast-iron, steel and bronze. As
well as for packaging as for flaconnage.
Accessories.
Own foundry.
Protective Corner Covers
Help protect most surfaces including glass and mirrors against chipping
and breaking during shipment or storage with MOCAP's vinyl corner
covers. These protective covers will provide a tough, durable protective
covering over almost any flat and formed application. MOCAP can vary
length, wall thickness and colour to meet your specifications. In additon to
the standard sizes, MOCAP can also produce "tailor-made" parts quickly
1339
glasstec
glasstec
Movomech Systems GmbH
Address Bunsenstr. 5
51647 Gummersbach
Germany
Telephone +49 2261 54920-0
Fax +49 2261 54920-29
Internet Address www.movomech.de
MyCatalog
MSC INSPECTION WORLDWIDE
Address ZA des Plattes, 1 Chemin des Plattes
69390 Vourles
France
Telephone +33 437 201565
Fax +33 478 079450
Internet Address www.msc.fr
Booth Hall 12 D49
Booth Hall 13 C89
PRODUCT OVERVIEW
02.11.01 Tools
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
Aluminium-Leichtlaufschienensystem MechRail
Das System basiert auf Aluminiumprofilen. Durch das Verwenden von
gezogenen Profilen gewinnen Sie viele Vorzüge. Die besondere Form und
Gestaltung gibt dem Profil maximale Torsionsfestigkeit und große
Tragfähigkeit. Das System ist für Belastungen bis zu 1.000 kg ausgelegt.
Trotz hoher Tragfähigkeit des Schienensystemes ist das System sehr leicht
zu bewegen.
Durch filigrane Aufhängungen und eine große Auswahl ruhig laufender
Laufwagen sind Sie in der Lage ein leichtlaufendes und vollständiges
System aufzubauen. Das einzigartige aufeinander aufbauende Profilsystem
ermöglicht eine beliebige Erweiterung von integrierten Aufbau- und
Ergänzungsmodulen. Aufgrund von Aussparungen und Freiräumen an den
Seiten der Profile vom Typ LHB und AHB wird die Aufhängung von
verschiedenem Zubehör vereinfacht. So sind Sie in der Lage elegante
individuelle Lösungen auf niedrigem Kostenniveau zu realisieren.
1340
glasstec
glasstec
COMPANY NEWS
MSC, SGCC & Visiglas: glasstec 2008 exhibition preview
Laser Hot End engraving system for containers traceability during all the production
MSC, SGCC, and Visiglas are from now on together in the Tiama group, and offer you
the best quality machines in the glass industry thanks to:
R&D: second to none
Red Carpet Service worldwide; 24/7
Worldwide presence, more people closer to glassmakers.
To stay always ahead, MSC, SGCC & Visiglas provide the best range of products for
hollow glass inspection and cosmetic & pharmaceutical glass. They are the only one to
provide a global solution for glassmakers by equipping the whole production line: the
Hot-End & the Cold-End. Visit our booth 13C89 at GLASSTEC to discover our latest
developments:
Hot-end inspection solutions:
process and during the whole glass container life thanks to a unique code.
I-Care: hot end device for production trends and stability analysis, critical defect
recognition and process optimization (consistent operator-oriented tools).
Cold-end inspection solutions:
ICAM & MCAL: Powerful vision machines for sidewall, dimensional and stress
inspection.
Multi: Base vision and base stress inspection with enhanced functionalities, an
extended finish inspection including wide mouth jars, and dot digital codes mould
number reader by camera.
Combi: An equipment that combine sidewall and base vision detections.
Quick, Check +: Servo motorized multi inspection (Optical plug gauging, leakage and
tightness, Non Contact wall thickness, Non Contact ovalization, etc ) on the widest
range of containers.
Atlas: Check Detection by Cameras
MyCatalog
MyCatalog
Cosmetic & Pharmaceutical solutions:
Astra: detection device for cosmetic defects in the sidewalls and dimensional control for
perfume, nail polish bottles and drinking glasses.
Argos: ON LINE Check detection and inspection on the widest range of containers.
Supervising system:
IAFIS system : plant supervising system for real time date
Laboratory devices:
Laboratory devices such as Seedlab (device counting and categorizing seeds to
measure the glass refining mark), Profiler designed to register the internal corkage
profile of wine and champagne bottles, and of all bottles having a long neck.
With their combine know how MSC & SGCC and Visiglas offer a wide range of
innovative and high-performance inspection devices. Come and visit our stand N°
13C89.
Messe Düsseldorf
for Exhibitors
Ident No.:
1341
glasstec
glasstec
MyCatalog
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
MSK Verpackungs-Systeme GmbH
Address Benzstr.
47533 Kleve
Germany
Telephone +49 2821 5060
Fax +49 2821 17866
Internet Address www.mskcovertech.com
PRODUCT DETAILS
MSK Schrumpfverpackungen-Einzigartige Lösungen
Außergewöhnliche Anforderungen an die Palettenladungssicherung
prägten in den vergangenen drei Jahrzehnten die Technik der MSK
Schrumpfverpackungsanlagen. Auf der Grundlage mehrer MSK Patente
sowie in enger Zusammenarbeit mit führenden Unternehmen
verschiedener Branchen entstanden wegweisende Lösungen für
branchenspezifische Anforderungen.
Nabertherm GmbH
28865 Lilienthal
Germany
Telephone +49 4298 922-0
Fax +49 4298 922-129
Internet Address www.nabertherm.com
Booth Hall 14 C41
Booth Hall 9 D37
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
Haubenöfen mit Wanne GW 830 - GW 8000
1342
glasstec
glasstec
Volumen: 690 - 4700 l
Max. Temp.: 900 °C
Für das Wölben und Biegen von komplexen Glasformen, wie z.B.
Glasmöbel, Duschkabinen, etc. bietet Nabertherm eine modular aufgebaute
Modellreihe von Wannenöfen an.
Nanjing Xinshu Machinery Co., Ltd
Address No. 205, Mufu East Road
210028 Nanjing
China (Rep.)
Telephone +86 25 85507934
Fax +86 25 85516714
Internet Address www.sgglass.com
Booth Hall 13 E01
PRODUCT OVERVIEW
PRODUCT DETAILS
BHB30 BURNOFF
The BHB30 Burnoff is used for forming machining of tableware line.The
BHB30 is used with the BH12 Press&Blow and it also can fit other machine
well. The BHB30 use synchronous drive system to keep synchronization
with product line.
Gas/Oxygen Distributor/Piping Redesigned
MyCatalog
MyCatalog
The top structure has been redesigned to make it easier for operators to
work around the burnoff.This Improves stability and support for the
loader,take out
Technical Features
Speeds 30 section ..36 65 pcs/min
Article Diameter ... ..40 110
mm
Article Height
..40 170
mm
BLBH16 GOB BLOWING
Usage:
This machine is a sixteen mould gob blowing machine and is provided with
Model BLD450 Gob-Fed Machine. Press-blow forming process is adopted.
This machine is suitable for glass instrument factories, glassware factories
and vacuum bottle factories to blow thin-walled glass products such as
flasks, Erlenmeyer flasks, coffee sets and vacuum bottles especially
borosilicate glass products.
Main technical parameters:
1).Output:12-48pieces per minute;
2).Power of electric motor:4KW;
3).Speed of electric motor:1400r/min;
4).Overall dimensions:4000 2850mm;
5).Weight:20t;
Products to be blown:
1).Maximum diameter:200mm;
2).Maximum length:400mm;
3).Wall thickness:0.3-3mm;
4).Maximum gob drop weight:1000g;
5).Maximum products weight:650g;
New Distributor provides move control for the customer to turn oxygen and
gas on and off
Top Structure Support Redesigned with Uni-column
1343
glasstec
glasstec
Nirvana Technologies (P) Ltd.
Address 492, Sahakar Nagar, Part 2, Chembur
400 071 Mumbai
India
Telephone +91 22 25518312
Fax +91 22 25506916
Internet Address www.nirvanatec.com
Booth Hall 15 B43
PRODUCT OVERVIEW
02.13.02 Software
MyCatalog
MyCatalog
COMPANY NEWS
Nirvana Technologies will unveil PLUS 2D - Glass optimization software verison 8 at
Glasstec 2008, Dusseldorf, Germany, the world s largest glass exhibition and
conference.
PLUS 2D : An efficient glass optimizer with a well designed, intuitive user interface that
generates optimum cutting patterns and has CNC links to many cutting tables.
The new release includes enhancements resulting in improved
utilization and speed apart from a host of new features like
pattern amendment, triangle nesting module, pallet optimization etc.
Nirvana's One-Stop solution for all glass processors and fabricators include a suite of
integrated products:
PLUS Label Maker - Bar-coded label printing software:
To print bar-coded labels using an ordinary printer.
PLUS Replicam - Digitizing software to replicate templates:
Convert a digital image of a template to a DXF file
PLUS Glass Manager - Order Processing and Inventory Software:
Estimate, prepare quote, manage customers, orders and inventory.
To know more about our products and to discuss how your business
can benefit from our solutions, we invite you and your colleagues to visit us at our stand
at Hall 15, B-43 between 21 and 25 October 2008.
Visit our website for more information:
http://www.nirvanatec.com/products.html
PRODUCT DETAILS
PLUS 2D - Glass Optimization Software
PLUS 2D - Glass is efficient glass cutting optimization software, ideal for
producers, processors and fabricators. It has an intutive well designed
modern user interface which is simple yet powerful. Whether you are
cutting manually or using a CNC cutting table, PLUS 2D generates
optimum cutting patterns at the click of the button.
http://www.nirvanatec.com/order.html
http://www.nirvanatec.com/nesting_software.html
Messe Düsseldorf
for Exhibitors
1344
glasstec
glasstec
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
MyCatalog
MyCatalog
Nirvana Technologies is proud to release PLUS-Replicam - Digitizing Software to
Replicate Templates, version 1.xx. PLUS-Replicam is a digitizing software that helps you
generate accurate drawings of complicated shapes quickly from digital images. Start with
a photograph of your template, calibrate the image in PLUS-Replicam, and trace the
outline of the shape automatically or manually and save it as a DXF file. This file can be
integrated into your workflow for downstream activities like order entry, production
planning, optimization etc. Optionally, generate NC codes for the shape.
Benefits:
1. Ensures accuracy while saving time and effort.
2. Highly flexible no limits on the size of the template.
3. No need to invest in an expensive digitizer or digitizing table
4. Save logistic cost and hassles no need to transport and store templates.
5. Template drawings can be archived and retrieved for later use.
6. Fast transition from data to cutting table. Also, integrated with PLUS 2D.
Features:
1. Trace shape outline automatically or manually and convert into a smooth tangential
contour suitable for CNC machines.
2. Add break out cuts and set attributes like speed, pressure, and other CNC attributes
for the cut.
3. Generate the NC Code, for many different CNC cutting machines, for the traced shape
4. Digitize complicated shapes, holes and cutouts, drawing them on separate layers for
drilling, grinding etc.
5. Use Inquiry tools to verify dimensions in addition to drafting features like fillet,
chamfer, edit, scale, rotate, mirror and snaps.
6. Work in your preferred units - millimeter, inches - metric or english, etc.
Messe Düsseldorf
1345
glasstec
glasstec
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
MyCatalog
MyCatalog
Nol-Tec's Bulk Bag Unloaders are designed to accommodate a variety of
bag styles and sizes. Our hoist-and-trolley model makes it possible for a
single operator to safely, quickly and easily lift, support and move a bulk
bag into the hopper without the aid of a forklift. The hopper discharge's
unique design allows the operator to effectively secure and seal the spout
of a tied bag. A confinement box prevents product leakage and dust from
escaping into the environment. Mechanical agitators knead the bag to
promote a smooth, continuous, free-flowing stream of material from the bag
into your process. The base section of either model can accommodate a
screw feeder, air-activated gravity conveyor, rotary airlock or pressure
vessel. To ease assembly and field installation, the units may be shipped
complete or in multiple sections.
Norddeutsche Seekabelwerke GmbH
NOL-TEC EUROPE S.r.l.
Address Via Milano, 14/N
20064 Gorgonzola / MI
Italy
Telephone +39 02 9516875
Fax +39 02 9511473
Internet Address www.nol-teceurope.com
Address Kabelstr. 9-11
26954 Nordenham
Germany
Telephone +49 4731 821294
Fax +49 4731 822294
Internet Address www.nsw.com
Booth Hall 17 C70
Booth Hall 15 G02
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT DETAILS
Versatile, Safe, Clean & Efficient
PRODUCT DETAILS
Profile Belts
NSW profile belts stand out because of their high tensile strength abrasion
resistance. Their comprehensive range of standard products covers a
broad spectrum of applications in industry - from woodworking machines,
glass and tile transport systems all the way to packing machines. We keep
you moving with three basic types of profile belts: round belts, V belts and
1346
glasstec
glasstec
wedge V belts. We offer all three profile belts in a variety of sizes, with and
without reinforcements. Additional product versions, individual special
profiles and sizes complete the range of products.
Main features:
- Made of polyurethane or polyester elastomer
- Available in four different Shore hardness values (85°A, 87°A, 92°A and
100°A)
- They can be connected quickly and easily, even directly into systems
without disassembling machine parts
- Resistant to oil, grease and most chemicals; unaffected by dust, dirt or
moisture
http://www.nsw.com
MyCatalog
MyCatalog
North American Refractories Co.
Address 4440 Glen Este Withamsville Road,
Suite
800
45245 Cincinnati, OH
USA
Telephone +1 513 9478400
Fax +1 513 9479318
Internet Address www.naref.com
EMail
Booth Hall 13 D14-6
SECA® and SECAflex®
SECA® timing belts are available as long length version and as welded
endless belts. They are used in synchronous conveyor systems, to provide
timing for linear motion or in power transmission systems. They are suited
to welding cleat sections and for various types of back covering.
Main features:
- Made of polyurethane elastomer
- Shore hardness: 92°A
- Longitudinal tension members provided by various versions of steel or
aramid cords
SECAflex® timing belts, as a refinement of the SECA line, have the same
basic properties but are specially designed for high-performance power
transmission and special conveying applications.
Main features:
- Made of polyurethane elastomer
- Shore hardness: 92°A
- Longitudinal tension members provided by various versions of steel cords
- Manufactured as truly endless belts without a weldet joint and
consequently:
- Maximum performance -- maximum power transmission
http://www.nsw.com
PRODUCT OVERVIEW
PRODUCT DETAILS
North American Refactories Co.
Application of EMISSHIELD® in Heat Treating Furnaces
Unlike the use of insulating materials that have predictable performance
characteristics under steady state conditions, the benefits of using
EMISSHIELD® depend greatly upon furnace
design and operating parameters. Uncoated refractories have emissivities,
Ew, in the range of 0.3-0.5 at heat treating temperatures. The application of
EMISSHIELD® to the refractory increases the emissivity of the refractory to
about 0.9. This means that about 90% of the energy absorbed by the
coating is re-radiated to the cooler furnace load. The emissivity of the load
dictates how much radiant heat will be absorbed.
Referring to the equation in the previous column, it is easy to see that by
increasing the Ew of the refractory, the heat absorbed by the furnace load,
Q, will increase significantly. This is not desirable where carefully-controlled
heat treatments must be maintained, so something else in the equation
must be reduced to compensate for the increase of Ew, while maintaining a
constant Q. The factor that must be reduced to maintain a constant Q is the
temperature, and this is accomplished by turning down the burners. Of
course, when the burners are turned down, fuel savings are gained.
1347
glasstec
glasstec
In practice, the best way to adjust the burners to compensate for the
increase in heat absorption by the parts being treated is to locate the
furnace control thermocouple adjacent to the parts. Figure 4 shows the
ideal thermocouple location for a casting being annealed. This
thermocouple placement will automatically maintain the desired
temperature of the furnace load by adjusting the burners to achieve the set
point temperature. If the control thermocouple were located much further
from the load, it may read a lower temperature from the coated refractories
and call for more heat, potentially overheating the parts being heat treated.
It is possible to use a remotely-located control thermocouple in an
EMISSHIELD®-coated heat treating furnace when necessary; however, a
means must be devised to correlate the load temperature before the
EMISSHIELD® was applied to the temperature of the load after the
installation of the coating. An optical pyrometer or other remote
temperature measurement instrument could be used to insure that the
temperature of the materials being treated remain at the desired
temperature while new, lower burner settings are being established.
The greatest energy savings will be realized in furnaces that are heavily
loaded. Ideally, the surface area of the EMISSHIELD®-coated refractory
should approximate the surface area of the furnace load. Large furnaces
containing small loads are not good candidates for coating with
EMISSHIELD®. Small furnaces do not realize significant benefits when
coated, regardless of the load. Furnaces that remain empty for long periods
of time between loads should not be coated with EMISSHIELD®. If an
empty coated furnace is held at temperature long enough, an increase in
fuel usage may result. The EMISSHIELD® will still absorb more energy, but
without a load to re-radiate to, this additional energy will be lost by
increased conductance through the refractory. Generally speaking, the
greater the thermal work being done in a heat treating furnace, the greater
the potential fuel savings. This result is assured by applying EMISSHIELD®
to large, fully-loaded furnaces.
MyCatalog
MyCatalog
NOV S.r.l.
Address Fondovalle, 29
43040 Solignano / PR
Italy
Telephone +39 0525 510201
Fax +39 0525 510187
Internet Address
Booth Hall 13 B87
PRODUCT OVERVIEW
PRODUCT DETAILS
Spare Parts
Our design and manufacturing philosophy drives us to utilize the maximum
possible of MARKET COMPONENTS so reducing the future SPARES
needs .In fact our buyers can find in their country
most of the pneumatic, electric/electronics and mechanical wearing parts.
On top of that we usually agree most of the brands components with the
buyer during the job order processing.
1348
glasstec
glasstec
MyCatalog
MyCatalog
O.I.M.M., Officine Italian Mould Makers
Address Loc San Marziale 7
53034 Colle Val D?Elsa (SI)
Italy
Gambi
Telephone +39 0577 92-9049
Fax +39 0577 92-9405
Internet Address www.oimm.eu
Booth Hall 14 D64
PRODUCT OVERVIEW
Vasi
PRODUCT DETAILS
Articoli da tavola
OCL INDIA Limited
Address Rajgangpur
770 017 Orissa
India
Telephone +91 6624 221212
Fax +91 6624 220133
Coppe
Internet Address www.ocl.in
Booth Hall 13 D83
PRODUCT OVERVIEW
Figure
1349
glasstec
glasstec
PRODUCT DETAILS
MyCatalog
MyCatalog
Continuous-action rotary machine with 36 vertical spindles for forming
ampoules from glass tube.
Glass Melting Tank
Glass melting furnaces, particularly of high pulling rate, are lined with
various high quality refractories.Most glass manufacturers have been
preferring super duty Silica Bricks for the crown because crown constructed
with Super Duty Silica Bricks can be insulated, resulting in saving of
10-12% input energy.The advantage of Super Duty Silica bricks over
conventional quality is due to its low Alumina, Titania & Alkali content, its
high P.C.E. value, high resistance to penetration of Alkali vapour
encountered during furnace operation & volume stability at furnace
operating temperature.
OCL India has experience of over four decades for the manufacture of High
Duty Silica bricks having very low flux factor & residual quartz.These bricks
are having very high refractoriness under load & shows excellent volume
stability at service temperature.
OCL's Silica insulating bricks have very low thermal conductivity which
results in excellent thermal insulation.
FPC Series Rotary Fire Polishers
A full range of turntable fire polishers, suitable for small and medium
production runs.
OCMI-OTG S.p.A.
Address Via Venezia Giulia 7
20157 Milano
Italy
Telephone +39 02 3909-181
Fax +39 02 3570-944
Officina Meccanica Sestese
Address Via Borgomanero, 44
28040 Paruzzaro / NO
Italy
Internet Address www.ocmigroup.com
Telephone +39 0322 541411
Fax +39 0322 230046
Booth Hall 14 E76
Internet Address www.omsspa.com
PRODUCT OVERVIEW
Booth Hall 17 B07
PRODUCT OVERVIEW
PRODUCT DETAILS
F.A.36 Ampoule Forming Machine
1350
glasstec
glasstec
PRODUCT DETAILS
MyCatalog
MyCatalog
Olivotto Glass Technologies S.p.A.
Strapping MODEL 031 M
Fully automatic strapping machine with belt driven top table
Address V.le Gandhi, 22
10051 Avigliana / TO
Italy
Telephone +39 011 9343511
Fax +39 011 9343592
Internet Address www.olivotto.it
Booth Hall 14 E62
PRODUCT OVERVIEW
Thermoshrinking MODEL DUO AT53
Automatic combined machine for hooding and thermoshrinking
01.06.01 Gob feeder
01.06.04 Bar feeder
Wrapping MODEL AV750
Automatic stretch Wrapping Machine
02.01.05 Sawing machines and rim polishing machines
1351
glasstec
glasstec
PRODUCT DETAILS
01.06.01 Gob feeder
F & NEF gob feeders
Olivotto is now proposing the latest generation of Electronic Feeder family
(NEF type) designed to feed all the range of forming machines from
presses to spinning to press and blow and blow-blow machines.
The EF models are electronically operated. They have a modular
construction: either the plunger, the shears and the rotating tube can be
supplied as stand alone mechanisms or integrated in a complete package.
The electronic equipment is based on the latest PLC technology allows a
very high precision control loop providing excellent performances and an
elevate degree of accuracy even at very high speed. Both plunger and
shears are controlled by means of electronic cams. The operator can
modify the shape of the plunger cam simply watching at it displayed on the
motor and pressing the error keys on the keyboard.
The F models are mechanically operated: a synchronous motor, through a
gear box, drives shears and plunger cams while a second motor drives the
rotating tube.
Main Features
Speed range: 3 to 200 cuts/min
Gob Weight range: 20 grs. To 12 Kg.
Suitable for Single, Double, Triple gob run
Shears:
- parallel type motor drive
- polar type with motor drive
- cam drive
- pneumatic drive
Plunger:
- motor drive
- cam drive
Refratories: suitable to fit with standard refractories and combustion
equipment
Options
Stirrers
Automatic electric adjustment of tube height
Plunger Rotation for low speed production
Serial interface with host computer
GWC (Gob Weight Control)
MyCatalog
MyCatalog
Olivotto Industries is the leader Company in the production of blow-blow
machine. The E series, which features the complete electronic process
control, has been in production for more than 15 years and it has been the
natural evolution of the T series, mechanical blowing machine, previously
produced in over 200 units.
Productions
Lighting bulbsHigh pressures lampsTumblersHigh quality
stemwareLaboratory waresBorosilicate pots
Main features
Complete electronic process control (no mechanical cams)Electronic
control of the movement of each single headPossibility of setting the
parameters either differently on each single head or globallyPossibility of
using only one section to test new production parametersPossibility of
saving the production parameters in dedicated menus with quick loading
functionsEasy and quick job changesMinimization of down-time for
machine maintenanceUser friendly machine-operator interfaceThermally
conditioned cooling circuit of suckerPossibility of choosing among rotary
turrets of different sizes for different article sizesPossibility of choosing
among different blowing head models for different article sizesUp to 4
blowing pressures availableVacuum available on the machine, if
requiredSynchronous sub-stations for stem sealing, if required
LC large container blowing machine
The LC, large container blowing machine, has been designed to produce
automatically huge containers (up to 64 lt) performing a patented high
efficient three steps process.
Production
containers for alimentary industry (water, wine, olive oil, vegetables,
alimentary preserves)containers for chemical products (acids, solvents,
reagents)
Main features
accurate and precise control of the forming processhigh quality of the
products: the automatic process eliminates all the limits coming from the
manual or even semi-automatic productionheavy reduction of production
costs: the accurate process control gives the chance of blowing containers
with thiner walls, that means lighter gobshigh process repeatibility: as the
LC machine is fed with ANTAS F20 gob feeder, the gob weight is steadily
kept under controleasiness of installation: LC is designed to be introduced
downstream furnaces feeding I.S. lineseasiness of maintenance and run for
operators experienced with I.S. machines
The patented process consists of three steps: blank, intermediate and blow
mould. Such arrangement allows a precise control of the glass expansion
E series blowing machine
1352
glasstec
glasstec
along the whole cycle. Furthermore, as the final expansion is the longest
operation of the cycle, the third mould has been duplicated, so as to have a
higher efficiency of the complete line.
Technical parameters
Production rate: 2 to 8 articles/minTypical daily pull: 15 to 25 tonsAvailable
as single section (LC/1)Fed by gob feeder, maximum gob weight 12
kGElectronic integrated control system ANTAS model ASYS3000 providing
motor synchronisation and timing of all mechanismsMaximum article sizes:
body diameter 460 mm, mouth diameter 150 mm, height 750 mm (higher
heights as option)
T36E bulb blowing machine
Olivotto Industries is the leader Company in the production of blow-blow
machines. The T36E electronic blowing machine, faturing blowing machine,
featuring complete electronic process control, is the natural evolution of the
mechanical T series and it has been developed mainly for the production of
lighting bulbs in sodalime glass. In addition, the machine can be used for
the production of small articles both in sodalime and borosilicate glass. The
T36E is equipped with 36 blowing heads and can operate either with 36 or
18 working heads.
Productions
Lighting bulbs in sodalime glassSmall tumblers in sodalime glassSmall
lamps in borosilicate glassSmall containers in borosilicate glass
Main features
Complete electronic process control (no mechanical cams)Electronic
control of the movement of each single headPossibility of setting the
parameters either differently on each single head or globallyPossibility of
using only one section to test new production parametersPossibility of
saving the production parameters in dedicated menus with quick loading
machine maintenanceUser friendly machine-operator interfaceWater
cooling circuit for suckerElectronic synchronization between rotary gob
distributor and machine turret
Machine configurations
glass: sodalime - borosilicategob loading: servo-controlled rotary gob
distributorgob weight: max 250 g working with 36 heads - max 450 g
working with 18 headsworking tables: solid (fixes)take-out: by moil
breakingarticle diameter: max 95 mm working with 36 heads - max 125 mm
working with 18 heads
PV automatic presses series
MyCatalog
MyCatalog
The family of Geneva wheel driven press machines has been developed to
allow the glass makers to select, among over 80 different models, the
presses that match their requirements in terms of size, pressing force,
productivity and speed. The standard driving system (Geneva wheel in oil
bath operated by brushless servo motor) is designed to guarantee an
extremely long working life, even at a production rate exceeding 55
cycles/minute. As option our exclusive patented system GDS (Gearless
Driving System), providing high speed and precision with no use of any
mechanism, thus having a virtually unlimited life, is also available.
Even though the Olivotto Glass Technologies PV machines show their best
performances when they run at high speed (the exclusive PV36/1 triple gob
machine produces more than 200.000 good items per day), they can
profitably operate in a wide speed range typically between 15 and 55
cycles/min. The table in the next page shows the different mould
arrangements available for some standard sizes of the working table.
Production (in all kind of glass)
TumblersStemsTee cupsBeer mugsDishesAsh traysOvenwareInsulators
Main Features
glass feeding: by gob feederdriving system: oil bath Geneva wheel
operated by servo motor or GDS systempressing unit: hydraulic, up to
200.000 N - electric, up to 60.000 N - pneumatic, up to 48000 N @ 300
kPatake-out: electrically driven, with either pincers and/or vacuum head.
Pneumatically operated (single or double head) as optionsuitable to
operate with either large-type split moulds and basket mouldsmould and
glass cooling system electronic system Olivotto Glass Technologies
providing timing of mechanisms, control of electric motors, control of
proportional and servo valves, and control of the complete lineslincoln type
lubrication system
PBB press blow blow machine
The PBB machine combines the experience acquired by Olivotto Glass
Technologies in different fields such as blowing process and press and
blow process.
An external unit is dedicated to the forming of the pareson by using a small
press group; the pareson is then automatically tranferred on a rotary
blowing machine where the first free blowing and the final blowing into the
molds take place.
A gripper-type take-out provides the automatic unloading of the formed
item. This machine is dedicated to the low speed production of high quality
tableware either in sodalime glass or crystal.
Productions
1353
glasstec
glasstec
TumblersStemwareVasesNarrow-neck bottles
Main features
Complete electronic process control (no mechanical cams)Maximum
flexibility in terms of range and size of the articlesPossibility of installing a
dedicated gob loading system for production of narrow-neck
bottlesPossibility of coupling the PBB with a small press for stemware
production using special equipment for sealing with smooth junction bowls
ands stems directly on the PBBElectronic control of the movement of each
single headPossibility of setting the parameters either differently on each
single head or globallyPossibility of saving the production parameters in
dedicated menus with quick loading functionsEasy and quick job
changesMinimization of down-time for machine maintenanceUser friendly
machine-operator interface
PBB RP press blow blow machine - rotating parison
The PBB machine combines the experience acquired by Olivotto Glass
Technologies in different fields such as blowing process and press and
blow process.
The PBB RP machine combines the advantages of the Press and Blow
process (high production speed, use of substation) and the Blowing
process (thin wall thickness, higher ware quality). The Pressing Unit, where
the glass gob coming from the feeder is falling inside the Blank Mould and it
is pressed by the Plunger. The Parison is formed and hold by the Rotating
Neck Ring to be transferred to the Blowing machine.
Production
TumblersStemware (sealing and stretching)Vases
Main Features
complete electronic process control (no mechanical cams)maximum
flexibility in terms of range and size of the articlespossibility of installing a
dedicated gob loading system for production of narrow-neck
bottlespossibility to produce stemwares with the sealing and stretching
process directly on the PBB RP machine, obtaining a smooth junction
among bowls and stemselectronic control of the movement of each single
headpossibility of setting the parameters either differently on each single
head or globallypossibility of saving the production parameters in dedicated
menus with quick loading functionseasy and quick job changesminimization
of down-time for machine maintenanceuser friendly machine-operator
interface
PSL double head press & blow machine
MyCatalog
MyCatalog
The PSL machine has been developed on the basis of the experience
gained by Olivotto Industries with completely automatic rotare type press
and blow machines.
The PSL is an innovative press and blow machine developed with an in-line
configuration and with all the main function (pareson pressing, blank mold
motion, take out, substations) controlled by servo-motors.
Each PSL module is equipped with a single blank mold which alternately
feeds two press and blow heads. Each press and blow head is equipped
with servo-controlled plunger unit, neck ring mechanism, blow mold
mechanism and servo-controlled synchronous type sub-station.
Productions
TumblersStemwareVases
Main features
Compact overall dimensionsModular concept: possibility of install up to
three PSL modules with each blank mold alternately fed by an oscillating
deliveryComplete electronic process controlElectronic control of the
movement of each single headPossibility of setting the parameters either
differently of each single heasd or globallyPossibility of using only one
section to test new production parametersPossibility of saving the
production parameters in dedicated menus with quick loading
machine maintenance User friendly machine-operator interface
CM spinning machine
Olivotto Glass Technologies has developed a new generation of versatile
spinning machines, available in different sizes so as to respond to any
market requirement.
Two parameters are the most important in the spinning process.
They are:
1) Speed profile of the chuck (that is of the mould)
2) Mould temperature management.
Thanks to our powerful electronic control, Olivotto Glass Technologies CM
spinning machines achieve excelent results because of the accurate control
of these two parameters. The speed profile of each mould is independently
adjusted by the operator by means of a keyboard, and then the computer
automatically checks the actual value with the programmed one, providing
automatic adjustments, whenever necessary.
The electronic system provides also the automatic control of the
temperature of each mould, by means of a sophisticated software routine
which adjusts the flow rate of all (4) cooling fluids.
1354
glasstec
glasstec
Production (in opal and soda-lime glass)
DishesBowlsLightingware
Main Features
Line speed: up to 70 cycles/minMaximum items sizes: 400 mm diameter,
150 mm heightFeeding system: direct drop from gob feederNumber of
moulds: 9 or 18 (other sizes available upon request)Automatic temperature
control of each mouldOne brushless servo-motor for each mould, providing
individual control of the speed profile - Lincoln automatic lubrication
systemComplete with unloader
CM spinning machine
Olivotto Glass Technologies has developed a new generation of versatile
spinning machines, available in different sizes so as to respond to any
market requirement.
Two parameters are the most important in the spinning process.
They are:
1) Speed profile of the chuck (that is of the mould)
2) Mould temperature management.
Thanks to our powerful electronic control, Olivotto Glass Technologies CM
spinning machines achieve excelent results because of the accurate control
of these two parameters. The speed profile of each mould is independently
adjusted by the operator by means of a keyboard, and then the computer
automatically checks the actual value with the programmed one, providing
automatic adjustments, whenever necessary.
The electronic system provides also the automatic control of the
temperature of each mould, by means of a sophisticated software routine
which adjusts the flow rate of all (4) cooling fluids.
Production (in opal and soda-lime glass)
DishesBowlsLightingware
Main Features
Line speed: up to 70 cycles/minMaximum items sizes: 400 mm diameter,
150 mm heightFeeding system: direct drop from gob feederNumber of
moulds: 9 or 18 (other sizes available upon request)Automatic temperature
control of each mouldOne brushless servo-motor for each mould, providing
individual control of the speed profile - Lincoln automatic lubrication
systemComplete with unloader
Danner Tubing Lines
MyCatalog
MyCatalog
Starting from the early 80 s, Olivotto Glass Technologies has developed
and produced Glass Tubing Lines, using the Danner technology, gaining a
leading position in this field with a great number of lines installed all over
the world.
Its reliability and its high quality performances make the Danner-type tubing
line a successful primary tool for the production of glass tubes in sodalime,
borosilicate, lead, neutral glass and quartz.
Production
Glass tubes for lighting industryGlass tubes for pharmaceutical
industryGlass tubes for laboratory and chemical waresGlass rods
Main Features
Complete electronic process controlPossibility of saving the production
parameters in dedicated menus with quick loading functionsMinimization of
down-time for machine maintenance user friendly machine-operator
interfaceIn-line gauging systems for tube diameter and wall
thicknessOff-line gauging equipment for tube diameter, wall thickness, bow,
siding and ovalityCold end equipment for Vello lines
Basic configuration
Gas-heated muffle (either with lip-block or spout technology)Danner
machineAir blowing unitForming chamberCooling runwayDiameter gauging
device for sorting and controlTube drawing machinePreliminary cutting
deviceSelecting unitCrushing machineFinal cutting and glazing
machineSynchronization and control system
Fire polisher machines
The following families of Fire-Polisher machines are presently available to
glaze a very wide range of articles and glass types.
MODEL RO
The family of horizontal fire polisher machines model RO can be divided in
three groups:
RO-C for traditional tableware (tumblers, bowls, dishes, cups): this type of
machine is operated with continuous chain rotation as well as adjustable
spindle rotation. It is normally used for high speed production (up to 220
pcs/min). It can work with single, double or triple step according to the
article size.
RO-I for traditional tableware as well as not-round articles and large
oval-dishes/trays: this type of machine could be operated with both
continuous chain rotation or slow / total indexed motion. By means of the
control system it is possible to program a constant, indexed or modulated
speed. In case of production of large items, by means of the electronic
control it is possible to run the machine with double or triple step and index
1355
glasstec
glasstec
mode in order to slow-down or completely stop the article under the
dedicated burners. The rotation speed of the ware-holders in the glazing
area is electronically controlled and programmable from the control cabinet.
Whenever necessary it is possible to stop the rotation of the items in a
specific area of the fire polishing.
RO-S for stemware or articles with handle: this type of machine is normally
operated with continuous chain rotation but with two glazing zones one
where the spindles are rotating and one where the spindles are fixed and
oriented. With this machine is then possible to glaze the article edge with
normal spindle rotation and then to orient the article in order to glaze the
moulds seams (on the stems or on the handle) It is also possible to equip
the fire-polisher with movable burner holders that follow the article during its
movement.
Technical features and Options for RO type fire-polishers
All the fire-polishing machines model RO can be completed by rotary or
linear type loading and/or unloading transfers. Such transfers can be either
pneumatically or electrically operated and can be equipped with overturning
devices. Different machines lengths (from 4000 to 8000 mm), chain link
pitch (from 110 to 200 mm) and burner holder sizes (from 200 to 1000 mm)
are available, Combustion systems and relevant burners for both gas/air
and gas/oxygen are available.
MyCatalog
MyCatalog
automatically unloaded with a pusher system to an unloading conveyor.
Two or more sections machines are available with different sizes according
to the article dimension.
WS welding & stretching machine
This is one of the last machines developed by Olivotto Glass Technologies,
and it is dedicated to the production of high quality stemwares in Lead
Crystal, Barium and even Sodalime glass.
The Olivotto Antas Welding and Stretching machine can be supplied in two
different versions, mechanical (traditional) or fully electronic (innovative
version), and in two main configurations, with 60 or 48 working sections
(WS60 or WS48), according the type of bowl forming machine installed
upstream.
The stemwares produced by this process are typically in Barium or in Lead
Crystal glass and, because of the wares high final quality and their special
shapes, are intended for high-end markets.
Other important feature of this machine is the high productivity (without
influencing the final quality): infact its typical production speed is of 40
finished stemwares per minute (gross production rate) with the WS48 and
of 60 finished stemwares per minute with the WS60.
MODEL RLP
Article Dimensions
The vertical chain rotation fire polisher model RLP is a specific machine for
glazing large articles with not round-shape at medium-slow speed. It work
on index mode, typically without spindle rotation (spindle rotation is
available as option) and allow the use of dedicated burners to glaze
external and internal parts of the articles (i.e. ovenware and large trays), a
special device to rotate the article of 90 degrees is available as option.
Gas/oxygen burners are normally recommended for this application.
Different machine length are available, upon request.
Min Max disk diameter: 40 -100 mm
Max bowl diameter: 130 mm
Min Max Bowl Moil diameter:
for press & blow process: 40 100 mm
for blow & blow process: 50 120 mm
Min Max bowl height (with moil): 100 277 mm
Min Max stem height (stretched): 15 160 mm
Min Max complete stemware height (including moil): 100
377 mm
MODEL RRC
The RRC machine is a specific rotary fire-polisher machine (Geneva wheel
driven) to specifically glaze stems before they will be sealed (with different
process) to the bowl. 18 or 24 stations machines are available with
gas/oxygen burners and continuous spindle rotation. Loading is performed
directly from the press and unloading with overturning device is provided to
a conveyor.
MODEL RS
The RS machine is a static fire-polisher machine to glaze stems or large
shaped articles at slow speed. The article is loaded on a supporting plate
that could be rotated or kept fixed, as needed, and it is glazed by means of
fixed burners located in the most critical area. After glazing the article is
1356
glasstec
glasstec
Omco International N.V.
Address Industriepark 'Lakeland'
9880 Aalter
Belgium
MyCatalog
Optima S.r.l.
Address Via Vespucci, 4
40017 San Giovanni in Persiceto / BO
Italy
Telephone +32 9 3742005
Telephone +39 051 826336
Fax +32 9 3743469
Fax +39 051 825182
Internet Address www.omcomould.com
Internet Address www.optima.it
Booth Hall 14 A34
Booth Hall 16 E38
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
We mould it for glass
OMCO offers a wide range of products and services to the hollow
glassindustry:
02.13.02 Software
05.03.05 Other control systems
1) Foundry
Especially developed casting materials for glass moulds in
grey and nodular iron and aluminium bronze
2) Moulds and mould accessoires for the production of packaging glass, in
particular for :
a) Food
b) Beverage
c) Cosmetics
d) Spirits
e) Pharmaceuticals
3) Moulds and mould accessoires for table ware and pressed glass
articles
4) Hot glass handling products
PRODUCT DETAILS
OPTY-WAY
The OPTY-WAY® program is a useful reference for entering, optimizing
and managing work orders for materials to be cut. This package is the end
result of years of specific design research, co-operation and in-the-field
experience by skilled engineers who are experts on solving company
problems.
Because all procedures are fully automated and self-guided, even the most
inexperienced users will quickly and easily learn the program's various
functions.
OPTY-WAY® has been fully developed with a 32-bit platform on the
Windows XP operating system. It has therefore all technical features of this
operating system, thus being totally compatible with it. Any peripheral or
pointing system, such as printers and mice, supported by Windows
98/ME/XP and 2000/2003 are automatically compatible with Opty-Way®.
1357
glasstec
glasstec
Ori-Mould Technology Co., Ltd.
Address No. 9 Yinhe Road, High-Tech
Industrial
Park, Southeast Development Zone
215533 Changshu, Jiangsu
China (Rep.)
Telephone +86 512 52300099
Fax +86 512 52302555
Internet Address www.ori-mould.com
Booth Hall 14 B22
PRODUCT OVERVIEW
PRODUCT DETAILS
Bottle Mould
MyCatalog
MyCatalog
OSC S.P.A. Glass Mould Factory
Address Via Enrico Fermi 3/5
20090 Assago (Mi)
Italy
Telephone +39 02 4880-506
Fax +39 02 4880-198
Internet Address www.oscmould.com
Booth Hall 14 E23
PRODUCT OVERVIEW
PRODUCT DETAILS
OSC Products
OSC know how enables the Company to realize a product in cast-iron and
bronze-alluminium, which satisfies the technical needs of Bottero,
Heye-Glass, BDF and Ehmart machines, that use NNPB, BB, PB
processes for the bathproduction of hollow glass such as bottles, jars and
flasks.
1358
glasstec
glasstec
Pannkoke Flachglastechnik GmbH
Address Händelweg 5
23556 Lübeck
Germany
Telephone +49 451 47008-0
Fax +49 451 47008-37
MyCatalog
MyCatalog
Eckschuh - zum Schutz von empfindlicher Ecken beim Absetzen auf den
Boden oder beim Transport wie zum Beispiel Glasscheiben
Tragkuli - zum Tragen von großen Plattenmaterial wie zum Beispiel
Glasscheiben oder Holzplatten
Tragboy - zum Tragen von großen Plattenmaterial wie zum Beispiel
Glasscheiben oder Holzplatten
Handlappen - der sichere und feste Griff mit der Hand - ist nicht nur zum
Tragen von Glasscheiben hervorragend geeignet sondern auch zum
Öffnen von Verschlüssen, Lösen oder Festziehen von Wasserhähnen und
vielem mehr geeignet.
Internet Address www.pannkoke.de
Parkinson-Spencer Refractories Ltd
Booth Hall 15 C20
PRODUCT OVERVIEW
02.11.01 Tools
PRODUCT DETAILS
Transportgeräte
Lenkroller - zum Transport von großen Plattenmaterial wie zum Beispiel
Glasscheiben auf der Baustelle
Kistenkarre - zum Transport von Kisten
Glas-Handträge - zum Tragen von großen Plattenmaterial wie zum Beispiel
Glasscheiben auf der Baustelle
Schultergurt - zum Tragen von großen Plattenmaterial wie zum Beispiel
Glasscheiben
Doppelgriffgurt - zum Tragen von großen Plattenmaterial wie zum Beispiel
Glasscheiben
Handgurt - zum Tragen von großen Plattenmaterial wie zum Beispiel
Glasscheiben
Abstellklotz - zum Schutz von empfindlichen Kanten beim Absetzen auf den
Boden wie zum Beispiel Glasscheiben
Address Holmfield
HX3 6SX Halifax
United Kingdom
Telephone +44 1422 254472
Fax +44 1422 254473
Internet Address www.parkinson-spencer.co.uk
Booth Hall 15 G01
PRODUCT OVERVIEW
PRODUCT DETAILS
System 500 Forehearth - Heating and Cooling
The roof block geometry used in the System 500 technology
effectively divides the forehearth into three lateral chambers. The
central chamber is used as a conduit for a longitudinal, forced
convection cooling system in which cooling air is injected into the
forehearth chamber at the start of each cooling zone and
exhausted through a central flue at the end of the zone. The
1359
glasstec
glasstec
MyCatalog
cooling air flow rate and the position of the exhaust damper are
been specifically designed to optimise the thermal
automatically controlled. In addition the forehearth is configured
conditioning process in the forehearth. Launched in the
with side flues which, when operating in cooling mode, allow the
early 1990 s the System 500 forehearth is currently
combustion gases to exhaust from the forehearth without
operated by glass producers in almost 40 countries world
entering the central cooling section. These exhausts are also
wide. These installations range from large 150 tonnes per
fitted with automatically controlled damper blocks. When
day production lines to smaller 20 tonnes per day producers.
the system is operating in heating mode, the cooling air
Irrespective of the scale of production the System 500 provides the
control valve and side dampers are closed
degree of thermal conditioning demanded by glass producers in the
automatically. This forces the combustion gases
21st century.
MyCatalog
into the centre of the forehearth resulting in a
rapid increase in glass temperature. In this mode
P-D Refractories Group, Feuerfestwerke Wetro
the central flue is used to exhaust the combustion
gases. By automatically controlling the rate of
cooling air, combustion gas and the position of the
side and central dampers the influence of the cooling
and combustion within the forehearth can be varied and the
degree of thermal conditioning controlled.
The MF-16-MC Forehearth
The design limitations associated with a forehearth width of 16 and
Address Wetro-Siedlung 13-22
02699 Puschwitz
Germany
Fax +49 35933 7476
Internet Address www.pd-group.com
Booth Hall 13 A49
the trend towards larger scale production has seen advances in
forehearth design and innovation concentrated on large tonnage
forehearths. Consequently the needs of the small-scale producer have
PRODUCT OVERVIEW
largely been ignored. To address this problem PSR has developed a
unique conditioning system for 16 wide forehearths. This system,
called the MF-16-MC Forehearth, utilises an automatically controlled
PRODUCT DETAILS
central cooling system and has been successfully applied to
forehearths with pullrates below 20 tonnes per day.
The System 500 Forehearth
The result of an intensive research and development
program utilising both physical and mathematical
modelling techniques, the System 500 technology has
Geformte Erzeugnisse
Tonerdereiche Steine (50-99% Al2O3)Bauxitsteine, keramisch und
chemisch gebunden (60-85% Al2O3)Sillimanitsteine, keramisch und
chemisch gebunden (55-80% Al2O3)Korundsteine (60-99%
Al2O3)Spezialsteine (chromhaltig, zirkonhaltig)Schamottsteine (25-50%
Al2O3)SpezialschamottsteineeisenarmCO-Beständigkeit Ahohe
AbriebfestigkeitSiliciumkarbidsteine (40-85% SiC)Zirkonsteine (60-65%
ZrO2Feuerleicht- und Isoliersteine
1360
glasstec
glasstec
MyCatalog
PEMCO International c/o PEMCO Emails S.r.l.
Address Via delle Industrie, 9
24040 Filago / BG
Italy
MyCatalog
Through a continued focus on research and a close co-operation with the
glass producers, PEMCO can quickly develop and supply special colouring
frits which are adapted to the glass composition and the forehearth
processing parameters of the customers.
Penelectro Limited
Telephone +39 035 9002036
Fax +39 035 9002693
Internet Address www.pemco-intl.com
Booth Hall 10 F22
Address Victoria Avenue
SS2 6DF Southend-on-Sea
United Kingdom
Telephone +44 1702 333007
Fax +44 1702 333107
PRODUCT OVERVIEW
Internet Address www.fivesgroup.com
02.11.09 Highly opaque special colours and conductive silver pastes for automotive glass
Booth Hall 13 D51
03.10.03.02.06 Glass paints
PRODUCT OVERVIEW
03.10.03.02.07 Precious metal preparations
03.10.03.02.09 Screenprinting, framing, painting and texturing tools
PRODUCT DETAILS
Glass Frits for Feeder Colouration
Based on its almost 90 years of experience in enamel and ceramic frit
smelting, PEMCO now also offers a special line of glass frits for forehearth
colouring.
These high performance frits are used by the glass industry for the
production of coloured bottles, flaconnages, tableware, glass building
blocks and other products.
PEMCO International is providing glassmakers with a wide range of
standard colours like blue, green, black and brown as well as special
colours such as pink, purple and violet.
These colourants have found quick acceptance throughout the glass
industry due to their outstanding processing properties and excellent colour
consistency.
PRODUCT DETAILS
Electric and Mixed-melt Furnace Systems
Electric melting offers the energy efficient and environmentally friendly
alternative to fuel-fired
furnace systems for a number of different glass types including:
- High quality tableware (soda-lime)
- Lead crystal
- Lead tubing (lighting)
- Container glass
1361
glasstec
glasstec
- Low expansion borosilicate
- Neutral glass (medical)
- Fluoride and phosphate opals
- Insulator and fibreglass
- Ophthalmic
- Flat glass (mini float)
Most Penelectro furnace systems utilise the vertical melting (VM) principle,
and can either be cold-top (CTVM) or hot top (HTVM) depending on the
type of glass and required production flexibility. The shape, format and
electrode type will also be determined by the glass composition. All
incorporate proven designs coupled with advanced monitoring and control
equipment.
Penelectro will also undertake special furnace design projects normally
on a joint development basis with the client when there are a particular
set of requirements that a standard type system will not satisfy, or when a
new process is under investigation. Group resources allow full trial melts to
be conducted if required.
MyCatalog
MyCatalog
PRODUCT DETAILS
PENNEKAMP HOT END AUTOMATION
Pennekamp is a major manufacturer for the Hot End Transportation
Systems in the various Glass Industries. With the long expertise in
engineering such systems it makes the company the preferred choice in
turn key solutions. The Automation Systems cover the following Areas:
Container Glass & Table Ware:
Transfer units cross conveyors and lehr stackers
Display Glass
TV Glass Manufacture (Panel & Funnel)
Display Glass Manufacture
TV Tube Industry (CRT)
Display Industry (LCD, PDP, TFT)
Specialty Glass
Pennekamp GmbH & Co. OHG, Ernst
Address Königsfelder Str. 38-42
58256 Ennepetal
Germany
Telephone +49 2333 605-0
Fax +49 2333 605-200
Internet Address www.pennekamp.de
PENNEKAMP LEHRS
Pennekamp is a manufacturer of a wide range of lehrs and ovens, which
only refer to the manufacture of processing of glass in the various designs,
shapes, etc. In detail this refers to annealing, decorating, tempering /
toughening, thermal processing, bending, sealing, vacuum exhausting,
baking and other productions involving thermal processes in batch type or
continues operation lehrs and ovens. The following are samples of the
Pennekamp scope of supply.
Products are as follows:
Booth Hall 14 E19
Container Glass & Table Ware
TV Glass & Display Glass Manufacture
PRODUCT OVERVIEW
TV Tube Industry (CRT) & Display Industry (LCD, PDP, TFT)
Flat Glass
Specialty Glass
For more specific and confidential designs please contact Pennekamp
directly by telephone, fax or email.
PENNEKAMP DECORATING LEHR
1362
glasstec
glasstec
The Decorating Lehr design follows the standard Pennekamp modular
sections at a length of 2,25m. However Pennekamp has introduced some
well proven details in order to make the lehr more efficient and productivity
as well as to reduce energy consumptions. In addition a special attention
has been drawn to the O2 content inside the lehr during the process to
ensure a perfect quality.
lehr belt width of up to 4,5 m
all heated sections with heat-resistant stainless steel inner hoods,
circulation fans, lehr belt crates
stainless steel front plates to avoid any corrosion particles getting into the
production
fully insulated lehr up to the cold end (insulation 300 mm plus 25 mm
ceramic fiber mat)
maximum outside wall temperature of 20°C above ambient temperature
direct shaft circulating fans, no V-belt ( maintenance free)
process controlled air inlets at the fast cooling sections
reacts to production stops to hold the temperature curve
electronical control system to automatically optimize air movements inside
the lehr to recover energy and cut down the consumption (Draft Control)
automatic oxygen level control
special fan blades at cold end to mix together the cold air with internal air
before it gets contact with the glass
system ensures optimal temperature distribution across the lehr belt width
easy to adjust belt tracking device at the lehr belt drive
internal belt return with self-cleaning device
controlled exit temperatures
compact burner system covering all safety devices as:
central air extraction fan to reuse heat energy
electrical heating system based on thyristor units for control
Option:
PLC to control with operator panel
PENNEKAMP POLYMER COATING
POLYMER APPLICATION SYSTEM PAS 650
The concept is to provide the Container Glass Industry with a new
technology to increase the internal pressure strength of non returnable
MyCatalog
MyCatalog
containers by coating them with a tough Polymer to heel flaws and to
protect the surface from all kinds of abrasion during it s way to the final
customer. At the same time this technology allows to reduce weights, to be
more competitive on the market against other packaging materials and
compensate for the coating cost.
Task:
provide a new technology for light weighting
increase internal pressure strength of non returnable containers
reduce glass weight
competitive market situation against other packaging materials
increase productivity and efficiency
Solution:
polymer coating with a even thickness of approx. 3-5 um
covering entire surface including the base
internal pressure strength increases of approx. 40-60 %, before and after
line simulation
Machine Concept:
compact, solid stainless steel construction
gripper mechanism to pick up entire lehr rows
smooth container handling
no glass - glass contact prior to the coating
single step dipping process
variable coating thickness
UV curable polymer
container release back onto the conveyor belt
Benefits:
machine to fit onto any existing production line
no additional factory space required
on-line coating process
very low coating costs
PENNEKAMP COLD END TREATMENT
The Glass Treatment within Pennekamp has a long tradition. The company
has always focused not only on the core business as a lehr manufacturer
but seen itself as a Production Line Supplier.The Glass Treatments are to
be seen as a required process to either protect the material during the
ongoing handling in transportation and filling.
Cold End Spray (Top)
This reliable Cold End Spray was designed to fulfill today s requirements in
the Container Glass Industry. It is a solid steel construction mounted onto
the Lehr Discharge Table by use of rails for accurate positioning.
Under Belt Spray
1363
glasstec
glasstec
This reliable Under Belt Spray was designed to fulfill today s requirements
in the Container Glass & Table Ware Industry. For some special
applications and products the requirement of a Under Belt Spray is required
to apply the protective coating also to the base. This area is normally not
coated at all.
MyCatalog
MyCatalog
HPL
Head Protector Link (HPL), this product has been developed by Pennine
Industrial to eliminate pin head wear and increase chain life.
The HPL allows the chain to be run closer to the transfer or dead plate,
improving product transfers between the IS machine and conveyor
It is a solid steel construction mounted onto the Lehr Discharge Table by
use of rails for accurate positioning.
Pennine Industrial Equipment Ltd
Address Commercial Road, Manor Croft
House
HD8 9DT Huddersfield
United Kingdom
Telephone +44 1484 864733
Fax +44 1484 865235
Machined Plastics
Machined Plastics
Pennine Industrial Equipment are committed to a continual capital
expenditure programme to ensure that we stay at the cutting edge and
provide top quality products economically.
Continuing investments have been made in the latest CNC machining
centres, CNC lathes and CAD / CAM systems.
Internet Address www.pennine.org
Booth Hall 13 E81
PRODUCT OVERVIEW
PRODUCT DETAILS
Static Type
Static Type.
This series of mechanical cluthes are designed for occasional engagment
and disengement of transmission drives when the shafts are stationary.
This coupling is available in 15 standard sizes.
For more details please view our on line catalogue here or contact our
sales department here.
Conveyor Components
Conveyor Components
1364
glasstec
glasstec
PKI-Teplotechna Brno spol. s.r.o.
Address Anenská 675/4
602 00 Brno
Czech Republic
MyCatalog
MyCatalog
Production lines for fibre glass
Fibre glass production lines consists of assemblies of UM type with the
length to width 3:1
Used heating - natural gas - air
- O2 - natural gas
- electro
Telephone +420 543 124000
Fax +420 543 124001
PLANSEE Metall GmbH
Internet Address www.pkiteplotechna.com
Booth Hall 13 C14
PRODUCT OVERVIEW
Address Metallwerk Plansee-Str. 71
6600 Reutte
Austria
Telephone +43 5672 600-0
Fax +43 5672 600-500
Internet Address www.plansee.com
PRODUCT DETAILS
Fibre glass production lines
Booth Hall 13 F34
PRODUCT OVERVIEW
03.02.02.04 Laminated glass (other)
Production lines for fibre glass
PRODUCT DETAILS
Glasschmelzelektroden aus Molybdän
1365
glasstec
glasstec
Beim Schmelzen von Glas mittels elektrischer Energie sowie bei elektrisch
betriebenen Boosting Systemen werden heute vorwiegend Elektroden aus
Molybdän eingesetzt. Die pulvermetallurgisch hergestellten Mo-Elektroden
zeichnen sich aufgrund ihrer Reinheit und Verarbeitung durch gute
Formbeständigkeit, hohe Korrrosionsbeständigkeit gegenüber
geschmolzenem Glas sowie einer guten elektrischen und thermischen
Leitfähigkeit aus.
Ebenso schließen sie aufgrund ihrer Werkstoffreinheit eine Verfärbung der
Glasschmelze sowie Blasenbildung aus.
Die patentierte Oxidations-schutzschicht SIBOR® für MolybdänGlasschmelzelektroden vereinfacht den Einbau von insbesondere Bodenund Plattenelektroden.
Mit der SIBOR®- Beschichtung werden die MolybdänGlasschmelz-elektroden während des Antemperns des Ofens zuverlässig
vor Oxidation geschützt.
Vorteile:
spezielle Glasschmelzelektrodenqualität im Bezug auf Korrosions- und
Kriechbeständigkeitkürzeste Lieferzeiten ab Lager durch
PLANSEE-EXPRESS für Standardelektroden mit abgestimmten
Gewindeformenauf Wunsch Fertigung von kundenindividuellen
Gewindeformen (Paßstufen, konischen Gewinden, etc)SIBOR®Beschichtung als Oxidationsschutzschicht für MolybdänNICROMBeschichtung von Kühlwasserinnenbohrungen zum Schutz vor
Wasserdampfkorrosionauf Wunsch mit Ausgaszertifikat
Ausführungen:
Die Glasschmelzelektroden werden mit einer glatt geschmiedeten und
chemisch gereinigten Oberfläche ausgeliefert. Auf Wunsch erhalten Sie
auch Elektroden mit mechanisch bearbeiteten oder beschichteten
Oberflächen
MyCatalog
MyCatalog
Schichten (Ophtalmik, Feinoptik, Optoelektronik, Reflektoren für Lampen
und Scheinwerfer)
Umfangreiches Know-How aus hausinternen Materialdatenbanken
kombiniert mit unserem Anwendungswissen über Hochleistungswerkstoffe
ermöglicht PLANSEE die Entwicklung von kundenspezifischen
Targetmaterialien, die für die jeweiligen Einsatzbereiche maßgeschneidert
sind.
Vorteile:
hohe Dichte und Reinheitüberlegene Sputtereigenschaften im
nichtreaktiven und reaktiven Beschichtungsmodusausgezeichnete
Homogenität
Ausführungen:
Targets und Arc Kathoden (gebondet, geklemmt) zum Sputtern bzw. zum
Lichtbogenverdampfen
Lieferformen:
planare , rohrförmige, kundenspezifische Geometrien
Pneumofore S.p.A.
Address Via N. Bruno 34
10098 Rivoli / TO
Italy
Telephone +39 011.950.40.30
Fax +39 011.950.40.40
Internet Address www.pneumofore.com
Booth Hall 12 B51
Sputtering Targets und Arc-Kathoden
Sputtering Targets und Arc-Kathoden werden in vielen Bereichen
industrieller Fertigung für die Herstellung dünner Schichten eingesetzt:
Metallisierungsschichten (Mikroelektronik, Displays, Optische
Datenspeicher, Photomasken, CIS Solarzellen)Diffusionsbarrieren
(Mikroelektronik, Kunststofffolien)Magnetische und Magnetooptische
Schichten (magnetische und magnetooptische
Datenspeicher)Funktionschichten auf Glas (Wärmeschutz-,
Sonnen-schutz-, Antireflex-, Antistatikbeschichtungen, schaltbare
Elektrochrome Verglasungen)Hartstoffschichten (Werkzeuge,
Komponenten im Automobil- und Maschinenbau)Tribologische Schichten
(Werkzeuge, Komponenten im Automobil- und Maschinenbau)Dekorative
Schichten (Armaturen, Beschläge, Uhren, Brillengestelle)Optische
PRODUCT OVERVIEW
02.11.06 Compressor
02.11.07 Vacuum pumps
1366
glasstec
glasstec
MyCatalog
COMPANY NEWS
Pneumofore, world leader manufacturer of rotary vane vacuum pumps and compressors,
has successfully completed the technical start-up of ten UV50 vacuum pump units, core
of the centralized system that will supply the entire vacuum needs at the Bahadurgarh
plant, the most prolific Hindustan National Glass & Industries (HNGI) facility in India.
HNGI, the largest producer of container glass in the country, has chosen the UV50
vacuum pumps for their high capacity and durability and for the guarantee of drastically
reduced energy and no water consumption. The Pneumofore centralized system is
composed by ten UV50 single-stage air-cooled rotary vane vacuum pumps, fully
accessorized, equipped with the special Variable Speed (VS) option, able to manage any
variation of vacuum request by changing the motor speed and providing constant
vacuum level at the IS machines. The entire system has a capacity of 32.000 m3/h with
900 kW installed nominal power.
MyCatalog
Login Code:
Password:
Create user account
Exhibitor Data Sheet
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
1367
glasstec
glasstec
MyCatalog
Pneumofore, leading manufacturer of vacuum pumps and air compressors since 1923,
will end the 2008 with significant success and a strong vision towards the future.
The closing year does not only mean the 85 years celebration of the company, proving a
solid experience and competence that no one else can claim on the industrial vacuum
and compressed air market, but also the achievement of increasing results. In mid
October, the turnover reached the one of the entire 2007 and the order book is complete
while production is working full to keep delivery terms. This positive performance is
following a yearly increase of turnover by more than 20% since 2005, which lets
Pneumofore stand today on a consolidated position as worldwide player in the global
market. The Pneumofore success is resulting from long term strategies, precise
investments, revival of entire departments and focus on R&D.
Recently, Pneumofore has developed a variable speed drive (VS) version of its UV
vacuum pumps. The VS drive is an electronic device that allows to set frequency/voltage
of electric motor power (from 35 to 60 Hz) in order to control the motor speed (from 1000
to 1750 rpm) and consequently the suction flow rate of the pump. Specially designed for
glassworks, but extremely important in many other applications where the vacuum flow
needs to vary depending on the production workload, the UV vacuum pumps VS version
is able to manage any eventual variation of vacuum by changing the motor speed
according to the feedback received from a vacuum sensor installed directly on the inlet
vacuum pipe. This allows to keep the vacuum level in the process as constant as
possible. The benefits are clear: energy savings, more flexible and adaptable system
and reliable vacuum level.
By the end of 2008 Pneumofore will present also the new design of the A120 rotary vane
air compressor. With reduced overall dimensions and noise level, this new compressor
will offer the same performance but with reduced space needs. Furthermore, the
machine has been developed to reach a lower air temperature at the outlet, thus reduced
energy consumption which means less energy costs.
Lately Pneumofore has participated at the Glasstec fair in Düsseldorf (Germany),
collecting visitors interest on its centralized vacuum solutions for IS machines. Next
year, Pneumofore will exhibit at Hannover Messe and at the most important glass-related
international tradeshows worldwide.
MyCatalog
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Messe Düsseldorf
1368
glasstec
glasstec
MyCatalog
In 2008 the Gallo Glass company, one of the largest glass container manufacturer in the
United States, selected Pneumofore UV rotary vane vacuum pumps as the best choice
for centralized vacuum needs at the IS machines. The UV units are designed for tough
working conditions and constant operation 24/7 with the guarantee of the lowest Life
Cycle Cost. Gallo Glass represents the first US glass reference for Pneumofore, leader
manufacturer of rotary vane vacuum pumps and compressors, with dedicated solutions
for worldwide glassworks.
MyCatalog
promeos GmbH
Address Am Weichselgarten
91058 Erlangen
Germany
Telephone +49 9131 5367-0
Fax +49 9131 5367-20
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Internet Address www.promeos.com
Booth Hall 13 B81
PRODUCT OVERVIEW
PRODUCT DETAILS
Gasporenbrenner REO
Im Porenbrenner REO findet die Verbrennung nicht mehr in einer offenen
Flamme statt, sondern in einer porösen Hochtemperaturkeramik, dem
Verbrennungsreaktor. Durch ihn ist eine flammenlose, volumetrische
Verbrennung in Form eines glühenden Keramikschaums möglich. Dieser
kann sowohl als strahlende Oberfläche als auch als homogene Hitzequelle
genutzt werden. Daraus ergeben sich folgende Vorteile:
flammenfreie Verbrennung stufenlose Modulierbarkeit der
Brennerleistungbeschleunigt ablaufende Reaktionenhomogene Verteilung
der Wärmemenge
Beliebige Bauformen wie runde oder rechteckige Brenner, Linien, Zylinder,
Ringe, Rauten und sonstige individuell angepasste Formen sind machbar.
Die Länge des Reaktors ist beliebig erweiterbar. Dimensionen von
mehreren Metern Länge mit einer Reaktorbreite von 15 - 200 mm lassen
spezifische Brennerleistungen von circa 2 bis 600 kW/m Länge zu.
1369
glasstec
glasstec
Pt. Dyson Zedmark Indonesia
Address Jl. Sulawesi Block F2-1
17520 Cikarang Barat, Bekasi
Indonesia
Telephone +62 21 8981270
Fax +62 21 8981271
Internet Address www.dyson-ceramic-systems.com
MyCatalog
Putsch GmbH & Co. KG
Address Frankfurter Str. 5-21
58095 Hagen
Germany
Telephone +49 2331 399-0
Fax +49 2331 399-3600
Internet Address www.putsch.com
Booth Hall 12 D41
Booth Hall 13 C56
PRODUCT OVERVIEW
PRODUCT DETAILS
Domestic Fire Ceramics
Gas Fire Ceramics
Firebacks
Gas Fire Coals
Gas Fire Driftwood
Gas Fire Logs
Gas Fire Pebbles
Gas Fire Radiants
MyCatalog
PRODUCT OVERVIEW
01.06.01 Gob feeder
PRODUCT DETAILS
01.06.01 Gob feeder
Shear Blade Systems
Shear blades for the glass industry play a very important part in the
production of quality glass.
Putsch shear blades are manufactured to the highest precision. Our blades
are proving their quality daily, by the thousands, successful under diverse
operating conditions;
with proper installation, a long service life can be realized due to the special
hardening process of our shear blades. This process makes them resistant
to wear.
Because of our consistent high quality manufacturing, Putsch shear blades
provide excellent cutting results with heavy or light gobs, slow or fast
cutting applications.
http://www.putsch.com
1370
glasstec
glasstec
Putsch Meniconi S.p.A.
Address Via Irlanda, 1
53036 Poggibonsi
Italy
Telephone +39 0577 90311
Fax +39 0577 9793335
Internet Address www.putschmeniconi.com
Booth Hall 14 D64
PRODUCT OVERVIEW
02.01.02 Glass saws
PRODUCT DETAILS
MyCatalog
MyCatalog
Articles dimensions: mm 350 x 350 for enclosed mould, mm 200 x 350 for
extendable mould.Moulds weight: 80 Kg.Positions on the table: 6 o 4.It can
work with: 2, 4, 3, 6 moulds.Table diameter: 1380 mm.Rotary table motor
power: 5,5 Kw controlled by an inverterSpeed table rotation:
adjustable.Pressing features: 10 t.Pressing motor power: 4,4 Kw.Pressing
run: 500 mm.Advancement speed: 160 mm/s.Cooling Fun: 3 Kw.Pneumatic
system: 6 BAR.Electric power requirement: 15 Kw.
The machine can be equipped with a shear group for glass cutting and with
a take out to extract the article by the mould and for the following
positioning on a conveyor belt.
The shear group has 3 mechanic positions adjustment. The advancement
of the cutting group and the cut are started by two pneumatic cylinders.
Advancement cutting group: 400 mm.
The take-out has two movements horizontal and vertical.
The horizontal one is realized by a no stem cylinder and a ball slide way.
The vertical one is realized by a ball screw started by an electric motor with
programmable position control.
No stem cylinder horizontal run: 750 mm.
Ball screw vertical run: adjustable.
Take out vertical run power motor: 0,4 Kw.
AUTOMATIC SPINNING MACHINE CRA 2000
The CRA 2000 is a spinning machine with rotary table, with
electric/electronic drive of the latest generation. The main characteristic that
distinguishes this machine from the existing ones available on the market is
the possibility of simultaneously manufacturing 2 items with different
shapes and dimension, up to a max. diameter and height of 100 mm.
Obviously all the accessories of the machine, shears unit, take out and ring
supporting arms to cover the mould, are designed to carry out this function:
they are automatically positioned according to the mould and the items
being produced.
TECHNICAL DETAILS:
ELECTRIC PRESS EPM 350
EPM 350/6 is a multi-station press with rotary table. The machine is
equipped of a pressing system with electronic start that permits to define
the exact pressing features for each mould present on the table . The
pressing is made by a special manufactured ball screw. The stations on the
table are equipped with adjustable cooling systems, tree are temporised by
solenoid valves.
The male has its own temporised cooling system.
TECHNICAL DETAILS:
Electric power requirement: 25 Kw.Centrifugation motor: 13,2 Kw.Automatic
cooling unit for moulds and items by means of cooling fan: 3 Kw.Nr.2 ring
supporting arms to cover the mould with automaticinsertion with controlled
preloading.Nr.1 take out (pliers or vacuum pump) with variable stroke and
grip.Nr.1 pneumatic motor-driven shears unit with automatic
positioning.Pneumatic system: 6 BAR.Vacuum pump: pneumatic.Self
centring spindles: diameter 250mm.
MACHINE DIMENSIONS:
Length: 3400 mm.Width: 2530 mm.Height: 3100 mm.Net weight: 3500 Kg.
MACHINE CONTROL
1371
glasstec
glasstec
Electric/electronic control cabinet, disjointed from the machine, equipped
with:
Modular PLC.Centrifugation digital frequency converter: 11 Kw.Digital
frequency converter for table displacement: 5,5 Kw.Supervision software
for machine programming, by means of PC with Touch Screen technology.
CONTROL CABINET DIMENSIONS:
Length: 1000 mm.
Width: 600 mm.
Height: 1800 mm.
Net weight: 300 Kg.
HYDRAULIC INJECTION MACHINE PMP 2
Hydraulic-injection machine with two working station, suitable for the
manufacturing of candle-holders, small animals ornaments, and high
thickness articles.
TECHNICAL DETAILS:
Article dimension: min. Ø 10 mm., max Ø 150 mm. (approx.)Height: 300
mm.Weight of glass: from 100 gr. to 2000 gr.Working speed: max. 4
strokes for minute.Hydraulic power plant included in the machine: 4
Kw.Hydraulic-piston injection system: stroke 200 mm.Max. injection
pressure : 1500 Kg. at 75 BAR of pressure.Max. injection speed: 200 mm.
par second.Total electrical power installed : 4 Kw multi-tension 40/60
Hz.Pad-holding hydraulic upper pistons with stroke adjustable for
height.Low-pressure circuit switching control for keeping the machine
runningafter injection.
MACHINE DIMENSIONS:
Length: 2200 mm.Width: 1100 mmHeight: 2250 mm.Net weight: 900 Kg.
Quantum Engineered Products, Inc.
MyCatalog
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
Quantum Forming System
Only Quantum's Forming System can provide glass makers with the
ulimate combination of hardware across all forming processes and we do it
with fewer system parts and on any IS machine.
The TWT Design Universal Cylinder Concept Unique Forming System Total
Forming Analysis Maximum Return on Investment - ROl Maximum
Production Flexibility
Ramsey Products Corp.
Address 135 Performance Drive
28012 Belmont, NC
USA
Telephone +1 704 394-0322
Fax +1 704 394-9134
Internet Address www.ramseychain.com
Booth Hall 13 C03
PRODUCT OVERVIEW
Address 438 Saxonburg Blvd.
16056 Saxonburg, PA
USA
Telephone +1 724 3525100
Fax +1 724 3524443
Internet Address www.quantumforming.com
PRODUCT DETAILS
Engineered Drive Systems
For customers that prefer a complete solution Ramsey designs and builds
chain drive transfer cases. These units are custom built to fit each
application so there is no minimum order quantiity. Also, because they are
Booth Hall 13 C25-1
1372
glasstec
glasstec
custom built, shaft sizes, chain and sprocket selections, lubrication method,
and enclosure materials can all be selected for the application. Depending
on customer preference, units can be partially assembled or fully
assembled and ready for installation. Typically units are shipped fully
assembled with a coat of gray primer applied.
To inquire about a drive system simply contact Ramsey sales.
A CASE STUDY
Application:
Positive Displacement Blower Drives
250 HP Motor as 1791 rpm.
1.36:1 Drive Ratio
Component Selected:
Ramsey RPV612 Chain
Ramsey RPV sprockets
A major OEM supplying positive displacement blower packages to a utility
company selected Ramsey silent chain drive systems to couple the motors
to the blowers. Ramsey designed and built a finished package including a
complete drive system with chain, sprockets, enclosure, and lubrication
system. The complete drive module was shipped to the OEM for assembly
into their blower package before delivery to the customer. Ramsey worked
closely with the distributor sales team, the OEM, and the end user to make
sure all requirements were satisfied.
Rath AG
Address Walfischgasse 14
1015 Wien
Austria
MyCatalog
MyCatalog
PRODUCT DETAILS
Porrath/Alporit
Unsere Feuerleichtsteine Porrath und Alporit umfassen das komplette
Sortiment für Anwendungen bis 1840°C.
Die chemischen und physikalischen Eigenschaften unserer Steine
repräsentieren das internationale Spitzenniveau.
Die Abstufung der chemischen Zusammensetzung sowie der
Klassifikationstemperatur erlaubt für jeden Anwendungstemperaturbereich
die Auswahl des optimalen Produkts.
Die Rohdichte ist so eingestellt, dass im Anwendungsbereich die minimale
Wärmeleitfähigkeit erzielt wird.
Einsatzgebiete:
Ofenanlagen für die keramische Industrie
Tunnel-, Herdwagen- und HaubenöfenPorzellanindustriechemische und
petrochemische IndustrieGlasindustrie
Hinterisolierung von Glasschmelzwannen
Isolierung im Bereich des Zinnbades bei
FlachglasproduktionKraftwerksanlagenStahlindustrie
Hochöfen
Winderhitzer
KoksofenbatterienNE-Metallindustrie
Isolierung von Anodentieföfen und KammerdeckelnZement- und
Kalkindustrie
Die Vorteile sind:
hohe Festigkeitenhervorragende Heißeigenschaften wie
Druckerweichen geringes Druckfliessen,gute
Temperaturwechselbeständigkeit
Telephone +43 1 513442724
Fax +43 1 513442787
Internet Address www.rath-group.com
Booth Hall 12 D07
PRODUCT OVERVIEW
Refractory Systems
SPIRATH (Spinell bricks)
ESCORATH (Chromecontent bricks)
KORRATH (Corundum bricks)
ALURATH (Mullite bricks)
ZIRRATH (Zirconsilicate bricks)
CARATH (Castables, Moratars, Mixers)
ALSITRA (Alumosilicate fibre materials)
ALTRA (Fibre materials based on Alumina)
PORRATH / ALPORIT (Insulating bricks)
1373
glasstec
glasstec
RESCAL S.A.
Address 200, Rue de la Couronne des Prés
78680 Epone
France
MyCatalog
Resim s.r.o.
Address Nudvojovicka' 1681
51101 Turnov
Czech Republic
Telephone +33 1 30900400
Telephone +420 481 319450
Fax +33 1 30900211
Fax +420 481 319469
Internet Address www.rescal.com
Internet Address www.resim.cz
Booth Hall 13 A87
Booth Hall 13 B62
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
Heating frame
Heating frame for ventilated furnace:
PRODUCT DETAILS
Production and installation of complete electrical equipment
1374
glasstec
glasstec
* Synchronous drives for IS machines
* Servodrives for gob distributors, inverts and take-outs
* Control of pusher mechanisms
* Reject systems for automatic rejection of defective products
* Control of pushers into cooling arch feeders
* Lubrication control, cooling air fan control, EPS valves
* Technical support during installation of Futronic GmbH control systems
* Wiring, peripheral connections, mounting and technical support druing
commissioning
MyCatalog
MyCatalog
PRODUCT DETAILS
Schmelzgegossene Produkte
Die REFEL-Sortennamen stehen für hochwertige, erstklassige Feuerfest
Produkte und für eine kundenorientierte Dienstleistung seit Bestehen der
Gesellschaft.
Heute ist REFEL ein integrierter Bestandteil der Gruppe RHI Refractories,
in der jetzt alle Aktivitäten für die Glasindustrie in der weltweit operierenden
RHI Gruppe konzentriert sind. REFEL wurde 1986 gegründet und 1993 in
die Didier Gruppe eingegliedert. Im Jahre 1995 übernahm die RHI Gruppe
die Didier-Werke AG.
REFEL mit Sitz in San Vito al Tagliamento, Italien, produziert
ausschließlich schmelzgegossene AZS-Produkte für die Glasindustrie mit
Fokussierung auf technisch hochwertige Materialien, die die Erfordernisse
des Marktes erfüllen. Diese sind insbesondere das Erzielen längerer
Ofenreisen, verbesserter Ofenleistung bzw. -auslastung bei erhöhter
Glasqualität. REFEL ist sehr erfolgreich bei der Fertigung von Feuerfest
-Materialien mit komplexer Geometrie, die für die Herstellung von
Sonderglas oft benötigt werden.
RHI Refractories und damit REFEL S.p.A. werden sich weiterhin sorgfältig
der Fertigung von spezieller und kundenorientierter Feuerfest -Produkte für
Schmelzöfen und Nebenanlagen in der Glasindustrie widmen.
RHI Glas GmbH
Address Abraham Lincoln Str. 1
65189 Wiesbaden
Germany
Telephone +49 611 2365297
Fax +49 611 2365535
Internet Address www.rhi-ag.com
Die anerkannte Qualität der Produkte und Dienstleistungen von RHI
Refractories stützt sich auf sorgfältig ausgesuchte und geprüfte
Rohmaterialien. Die Fertigungsanlagen arbeiten mit Stand der Technik.
Dazu kommen die praxisorientierte Forschung und Entwicklung in den
eigenen Laboratorien in San Vito al Tagliamento, Italien, und Leoben,
Österreich. Der Erfolg beruht auch auf die langjährige Erfahrung der
Mitarbeiter im Verkauf, Marketing und Forschungsabteilungen. Folglich
sieht sich RHI Refractories nicht nur als zuverlässiger Lieferant von
hochwertigen Feuerfest-Materialien sondern auch als Partner der
Glasindustrie.
Booth Hall 12 B01
PRODUCT OVERVIEW
1375
glasstec
glasstec
RUREX-STAHL Dr. Otto Kukla GmbH
Address Steinhof 37
40699 Erkrath
Germany
Telephone +49 211 243014
MyCatalog
MyCatalog
COMPANY NEWS
RUREX will present together with FCT on occasion of the 20th. glasstec in Duesseldorf
the world`s first FULL CERAMIC SHEARBLADE FOR GLASS GOB CUTTING.
Extreme light weight and long-lasting performance is the main goal of this blade which is
now available beside the standard RUREX steel and Stellite blades.
For more information look to the attached flyer and make a visit on our booth at the
glasstec 2008 in Duesseldorf from 21st to 25th of October 2008 in Hall 13 booth 13 E 17
Fax +49 211 243400
Internet Address www.rurex.de
Booth Hall 13 E17
PRODUCT OVERVIEW
PRODUCT DETAILS
High developped forming machines
Forming machines for special figured, wired, profile, solar and crystallite
glass.
High Quality Shear Blades in different alloys
Beside the standard steel "HS/80" we are supplying shear blades in a new
powder metallurgical steel "HS/K" and in high temperature material
"Stellite".
Latest development is a full Ceramic Shear blade with longlife performance.
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
1376
glasstec
glasstec
MyCatalog
Anlässlich der GLASSTEC 2008 präsentiert RUREX zusammen mit FCT das erste
Vollkeramikmesser für die Glasindustrie.
Wir bieten dieses HIGHTEC Messer als Alternative zum Hartmetallmesser an und als
Ergänzung zu unseren Stahl- und Stellitemessern.
Vorteile dieses Messers sind sein geringes Gewicht, die extrem lange Standzeit, sein
niedriger Reibungskoeffizient und die absolut isolierenden Eigenschaften.
Nähere Angaben entnehmen Sie bitte dem beigefügten Prospektblatt.
Wir freuen uns auf Ihren Besuch auf unserem Stand!
glasstec - Düsseldorf
21.10.-25.10.2008
Besuchen Sie RUREX-Stahl
Halle 13 Stand 13 E 17
MyCatalog
Mehr Informationen
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
1377
glasstec
glasstec
MyCatalog
RUREX will present together with FCT on occasion of the Glasstec in Duesseldorf the
world`s first FULL CERAMIC SHEARBLADE FOR GLASS GOB CUTTING.
Extreme light weight and long-lasting performance is the main goal of this blade which is
now available beside the standard RUREX steel and Stellite blades.
For more information look to the attached flyer and make a visit on our booth at the
glasstec 2008 in Duesseldorf from 21st to 25th of October 2008 in Hall 13 booth 13 E 17
MyCatalog
S.I.G.MA. S.r.l. Refrattari Tecnici Industriali
Address Via Delle Grigne, 12/A
22070 Locate Varesino / CO
Italy
Telephone +39 0331 823195
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
Fax +39 0331 823198
Internet Address www.sigmaref.it
Booth Hall 13 D53
PRODUCT OVERVIEW
PRODUCT DETAILS
Furnace Refractories
1378
glasstec
glasstec
Saati S.p.A.
Address Via Milano, 14
22070 Appiano Gentile
Italy
MyCatalog
MyCatalog
modes: manual, semi-automatic and automatic.
http://www.saati.com
Saint-Gobain SEFPRO
Fax +39 031 933392
Internet Address www.saati.com
Booth Hall 12 E75
PRODUCT OVERVIEW
Address 84131 Le Pontet Cedex
France
Telephone +33 4 90399842
Fax +33 4 90399899
Internet Address www.sefpro.com
Booth Hall 13 A63
PRODUCT OVERVIEW
03.10.03.02.09 Screenprinting, framing, painting and texturing tools
PRODUCT DETAILS
PRODUCT DETAILS
TOP 14 Pneumatic Stretching System
Thanks to the deep technical know-how of the screen-printing market,
SaatiPrint produces quality instruments and equipments for measuring,
checking and tensioning the fabric during the whole screen-printing
process. The technical fabrics together with the specific professional
instruments create a perfect combination between durability and high
definition of the final product.
The Top 14 Clamp is a highly advanced, yet easy to use system, which
achieves the highest recommended tensions more uniformly, without
over-tensioning the corners. It provides the greatest stability of any system
available. Among the most notable features of this premier stretching
system is its independent or simultaneous warp/weft tensioning capability.
Another great feature is a special pneumatic device that totally eliminates
the contact between fabric and frame while allowing frame compression.
The system manual control panel is ergonomically designed and allows
continuous non-incremental adjustments on demand. All pneumatic
connections offer quick release for rapid frame size changeover and
system expansion. The electronic control panel allows operation in three
ab Alumina JARGAL M
The typical glass contact materials for the end zones of furnaces
(working-end, feeder channels) when glass quality is the priority : TV Glass,
high quality container glass, float glass.
b Alumina JARGAL H IMP
1379
glasstec
glasstec
Its neutrality against soda vapors makes it the best choice for the
downstream part of superstructures in demanding applications.
MyCatalog
MyCatalog
SAXONIA Edelmetalle GmbH
Address Erzstr. 5
09633 Halsbrücke
Germany
Telephone +49 3731 782-0
Fax +49 3731 782-430
Internet Address www.saxonia.de
Lip stones
Lip stones are not standard items available from inventory. They are
tailor-made to glassmakers specific drawings. However Saint-Gobain
SEFPRO does provide its clients with the possibility of maintaining
minimum stock, as per the agreed-upon sales conditions.
Each Saint-Gobain SEFPRO lip stone has an identification number and is
individually inspected for compliance with specifications: dimensions,
flatness, aspect, straightness of the lip and the pouring table, and others.
Booth Hall 15 A37
PRODUCT OVERVIEW
01.06.04 Bar feeder
02.06.08 Sputtering targets for glass coatings
Monolithics
Saint-Gobain SEFPRO offers the Worldwide glass industry a full range of
Unshaped Products. These materials have been specifically designed to
complete SEFPRO global offers (Bricks and blocks), both for Electrofused
and Sintered products. All the potential application areas are covered
(Paving Sub-Layers, hot and cold repairs, jointing).
PRODUCT DETAILS
Laboratory equipment
Moulds and crucibles in various designs and volumes made from Pt99.9,
PtRh10, PtAu5 and DVS-PtRh10
Sintered Mullite
In the range of Sillimanite and Mullite basis products,
Saint-Gobain SEFPRO present a complete line dedicated to the Glass
Industry, with leading products such as ARKAL 65V and forehearths
monolithic roof blocks, or BP Mullite for high temperature and high spans
(up to 9 meters) reinforcement glass fiber furnace crowns.
Bushings for the glass fiber industry
Bushings made by SAXONIA produce E glass fibers and C glass fibers in
single-stage and two-stage processes world-wide.
Use of materials: PtRh20, PtRh10 as well as dispersion-strengthened
PtRh5 (DVS-PtRh5) and PtRh10 (DVS-PtRh10).
Number of nozzles: 800-4000
Nozzle geometry: tapered or cylindrical
Bottom plate production: pressed or TIG welded
01.06.04 Bar feeder
Equipment for glass melting
1380
glasstec
glasstec
Production is carried out to customer specification for tableware,
automobile glass, optical glass, LCD-glass.
Engineering
MyCatalog
MyCatalog
Pegel für PB, PBW, NNPB
-Borierte Oberfläche und Materialbeschaffenheit als Gebrauchsmuster
national undinternational geschützt
(nat.Nr.639883/inter.Nr.2091276)
SCHRADER Glasformenbau GmbH & Co. KG
- Oberflächenhärte 1900 Vickers
- Grundhärte 60 HRC
- Maßgenauigkeit innerhalb 0,02mm
Address Rehwinkel 2-6
32457 Porta Westfalica
Germany
Telephone +49 5731 7606-0
Fax +49 5731 7606-30
- Universell einsetzbar bei Enghals- und Weithalsgefäßen und
EPB-Verfahren
- Hohe Wirtschaftlichkeit
- Preiswerter als jeder andere Pegel
Internet Address www.schrader-gfb.de
Booth Hall 14 A59
PRODUCT OVERVIEW
02.03.05 Polishing technology
Schunk Kohlenstofftechnik GmbH
Address Rodheimer Str. 59
35452 Heuchelheim
Germany
Telephone +49 641 6082097
PRODUCT DETAILS
Tibotherm
Fax +49 641 6081673
Internet Address www.schunk-group.com
Booth Hall 14 A42
PRODUCT OVERVIEW
1381
glasstec
glasstec
PRODUCT DETAILS
Hot Glass Handling
Hot Glass Handling
During the production process of glass, wherever hot glass is handled, it
comes into contact with components made of other materials. The
operational reliability and the properties of these materials are decisive for
an efficient and trouble-free production as well as for an excellent finish on
the glass products.
This is why we manufacture such components out of carbon. Like no other
material, carbon is suited for the applications in the glass industry, due to
its unique properties.
- Carbon prevents surface checking in the glass because of its significantly
lower thermal conductivity, compared to that of metals.
- Carbon does not leave any discoloration on the glass parts, due to its
excellent chemical resistance.
- Carbon allows for long ligetimes of the handling components as a result of
its outstanding resistance to high temperatures and oxidation.
For parts exposed to extremely high mechanical loads, Schunk Materials
offers carbon fiber-reinforced materials.
MyCatalog
MyCatalog
SGCC Inspection Worldwide
Address 105 rue du Fosse Blanc
92230 Gennevilliers
France
Telephone +33 146 138434
Fax +33 147 946560
Internet Address www.sgcc.com
Booth Hall 13 C89
PRODUCT OVERVIEW
1382
glasstec
glasstec
MyCatalog
COMPANY NEWS
MSC, SGCC & Visiglas: glasstec 2008 exhibition preview
MSC, SGCC, and Visiglas are from now on together in the Tiama group, and offer you
the best quality machines in the glass industry thanks to:
R&D: second to none
Red Carpet Service worldwide; 24/7
Worldwide presence, more people closer to glassmakers.
To stay always ahead, MSC, SGCC & Visiglas provide the best range of products for
hollow glass inspection and cosmetic & pharmaceutical glass. They are the only one to
provide a global solution for glassmakers by equipping the whole production line: the
Hot-End & the Cold-End. Visit our booth 13C89 at GLASSTEC to discover our latest
developments:
Hot-end inspection solutions:
process and during the whole glass container life thanks to a unique code.
I-Care: hot end device for production trends and stability analysis, critical defect
recognition and process optimization (consistent operator-oriented tools).
Cold-end inspection solutions:
ICAM & MCAL: Powerful vision machines for sidewall, dimensional and stress
inspection.
Multi: Base vision and base stress inspection with enhanced functionalities, an
extended finish inspection including wide mouth jars, and dot digital codes mould
number reader by camera.
Combi: An equipment that combine sidewall and base vision detections.
Quick, Check +: Servo motorized multi inspection (Optical plug gauging, leakage and
tightness, Non Contact wall thickness, Non Contact ovalization, etc ) on the widest
range of containers.
Atlas: Check Detection by Cameras
Cosmetic & Pharmaceutical solutions:
Astra: detection device for cosmetic defects in the sidewalls and dimensional control for
perfume, nail polish bottles and drinking glasses.
Argos: ON LINE Check detection and inspection on the widest range of containers.
Supervising system:
IAFIS system : plant supervising system for real time date
Laboratory devices:
Laboratory devices such as Seedlab (device counting and categorizing seeds to
measure the glass refining mark), Profiler designed to register the internal corkage
profile of wine and champagne bottles, and of all bottles having a long neck.
With their combine know how MSC & SGCC and Visiglas offer a wide range of
innovative and high-performance inspection devices. Come and visit our stand N°
13C89.
MyCatalog
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
1383
glasstec
glasstec
Shandong Sanjin Glass Machinery Co., Ltd.
Address 81 Xinjian Middle Road
255300 Zhoucun, Zibo, Shandong
China (Rep.)
Telephone +86 533 6180774
Fax +86 533 6166065
Internet Address www.sanjinglass.com
Booth Hall 12 D37
PRODUCT OVERVIEW
PRODUCT DETAILS
HD 4 S.G. I.S. Machine
MyCatalog
MyCatalog
Shanghai Hengye Chemical Industry Co., Ltd
Address No.2315, Nanfeng Road,, Qingcun
Town,
Fengxian
201414 Shanghai
China (Rep.)
Telephone +86 21 57568588
Fax +86 21 57568970
Internet Address www.hyms.com.cn
Booth Hall 12 E74-5
PRODUCT OVERVIEW
PRODUCT DETAILS
waterproof air separation special-purpos silica gel
Properties & applications:
Appearance of the product is white or light gray spherical particle. It is a
kind of silica gel processed with powder. It has two kinds: KSG(FNG)-1and
KSG(FNG)-2. The product, besides having performance of general silica
gel, also has the following advantages: good non-crack when meeting
water, low regenerating crashing ratio and long working life.It is pointed as
silica gel for air plant by oxygen making industry. It is mainly used for air
drying in the couse of air plant, sorbent of acetylene in the liquid air and
liquid oxygen, dryer of technological gas, catalyst carrier , ion sorbent as
well as buffering dryer of guard bed of general silica gel and silica sand etc.
packaging: 20kg or 25kg/compound bag.
1384
glasstec
glasstec
Shanghai SGMT Glass Mach-Tech Co., Ltd.
Address No. 4756 BaoAn Road AnTing
JiaDing
201814 Shanghai
China (Rep.)
MyCatalog
Sheppee International Ltd.
Address Halifax Way Airfield Business Park,
Elvington
YO41 4AU York
United Kingdom
Telephone +86 21 59508712
Telephone +44 1904 608999
Fax +86 21 59508711
Fax +44 1904 608777
Internet Address www.sgmt.com.cn
EMail [email protected];
[email protected]
MyCatalog
Internet Address www.sheppee.com
Booth Hall 14 D05
Booth Hall 10 D30-2
PRODUCT OVERVIEW
PRODUCT OVERVIEW
01.06.01 Gob feeder
PRODUCT DETAILS
PRODUCT DETAILS
01.06.01 Gob feeder
Electronic Feeder Type EF-A
Electronic feeder type EF-A changes the type of traditional mechanical
driver. The driving of plunger, sparing material and cutting by servo system
, controlled by computer . The working curve of plungers is accomplished
achieved by electronic index driver. Accurately and stably cutting , speed of
sparing material and adjusting height is accurate. Because of these ,
adding material ,sparing material and cutting can run in harmony , the
weight of material is controlled accurately.So according to different
production, speed,curve of adding material and speed of sparing material to
operate easily and conveniently , and run accurately and reliably . Raise
the quality and efficiency of production .
AWT-1000
AWT-1000 For High Speed and Unstable Containers
Sicatec GmbH - Sintered Carbon Technologies
Address Weinstr. 72
67147 Forst a. d. Weinstrasse
Germany
Telephone +49 6326 9668771
Fax +49 6326 9668772
Internet Address www.sicatec.de
Booth Hall 11 D07
1385
glasstec
glasstec
PRODUCT OVERVIEW
MyCatalog
MyCatalog
COMPANY NEWS
PRODUCT DETAILS
Formen aus Carbonmaterial und Grafit
HohlglasfertigungMundblas- und Automatenfertigung
(Rotation)FestblasformenRohrglasproduktionGrafite für
HeißhandlingBodenscheren, Schablonen, etc.
Mehr Informationen
für Aussteller
Ident-Nr.:
Standauftrags-Nr.:
Passwort:
Tel.:+49/211 4560-400
Login:
Passwort:
Passwort vergessen?
1386
glasstec
glasstec
Siebenlist Glas-Schmelzofen-Technik
MyCatalog
SIMTECH
Address Willicher Str. 20a
47918 Tönisvorst
Germany
Address Rue de la Grande Couture, 14
7503 Froyennes
Belgium
Telephone +49 2151 794637
Telephone +32 69 889670
Fax +49 2151 791983
Fax +32 69 889677
Internet Address www.siebenlistglas.de
Internet Address www.simtech.be
Booth Hall 9 D38
Booth Hall 13 B54
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
High-Speed Elektro-Fusing-Ofen
Mit dem neu entwickelten Siebenlist Ofen-System ist es möglich, je nach
Leistung des Ofens (unterschiedliche Leistung erhältlich ab 12 kW), ab
einer Stunde Brenndauer den eigentlichen Brenn-/Schmelzvorgang
durchzuführen und dann durch Weiterfahren auf die nächste Brennkammer
mit dem nächsten Prozess zu beginnen.
Für einfache einlagige Objekte wie Teller, Aschenbecher, Lampen (4-6
mm) etc. ergibt sich so ein Brennvorgang von einer Stunde (inklusive
Temperphase).
PRODUCT DETAILS
Flexgrip - Container Handling Equipment
Simtech designs, manufactures & supplies for the handling of hollow glass
(bottles & jars) and PET bottles, comprising gripper tubes (pneumatic
gripper), vacuum heads and vacuum plates, coated belts, etc.
FR: Simtech conçoit, fabrique & commercialise pour la manipulation du
verre creux (bouteilles & pots) et bouteilles PET, comprenant préhenseurs
pneumatiques (ou vérins pneumatiques), têtes à vide et plaques à vide,
courroies revêtues, etc.
RU:
,
,
Flexgrip
Simtech
,
(
)
(
)
PET.
,
,
.
,
1387
glasstec
glasstec
MyCatalog
.
Simtech
http://www.simtech.be/eng/contact.aspx
http://www.simtech.be/eng/produits/produits.aspx?numpage=1&IdGamme=6
,
.
,
Flexgrip - Container Handling Equipment
,
(
MyCatalog
,
)
.
RU:
,
,
Flexgrip
Flexgrip - Container handling Equipment
Simtech
(
,
)
(
)
PET.
,
RU:
,
,
.
,
.
Simtech
,
,
Flexgrip
Simtech
.
,
(
,
)
(
)
,
PET.
(
,
)
,
,
.
,
.
.
Simtech
,
.
,
,
(
,
)
.
1388
glasstec
glasstec
MyCatalog
MyCatalog
Sipac S.p.A.
Address Via Berettinazza, 25
43010 Fontevivo / PR
Italy
Telephone +39 0521 611811
Table-Top containers and accessories for shaped containers
Fax +39 0521 611850
Internet Address www.sipac.pr.it
Booth Hall 13 B63
PRODUCT OVERVIEW
Sklostroj Turnov CZ s.r.o.
PRODUCT DETAILS
Address Preperska 210
511 01 Turnov
Czech Republic
Telephone +42 481 350200
Table-Top conveyors
Fax +42 481 350222
Internet Address
EMail
Booth Hall 13 B73
PRODUCT OVERVIEW
Cullet conveyors and chutes
01.06.01 Gob feeder
Rubber slat overturners and elevators-lowerators Omega shape
1389
glasstec
glasstec
PRODUCT DETAILS
01.06.01 Gob feeder
Forehearths&Feeder
DS - Gob Feeder
Gob feeder is a part of automatic container glass production line and is
designed to regulate temperature of molten glass and its dosing in gobs.
The feeder is designed for middle- and high-capacity production of
container glass.
Homogenous conditioning and fixed delivery of the molten glass is secured
by the molten glass channel. The channel is dimensioned accordingly to
the requirement of the molten glass capacity in tons
In specific range, the operator is able to influent the technology of the gob
because of the electronic control of servo drives of the feeder mechanisms.
The servo drive feeder mechanism allows to affect the motion of the shears
and of the plunger.
SERVO PLUNGER MECHANISM SP-08
Sklostroj has developed as one of the first companies a Servo Plunger
mechanism. This complete new mechanism can work for 1 up to 4 GOBs.
The Servo Plunger is developed to handle up to 25 cycles/minute,
regardless of which process or product. Also because of the servo driven
mechanism it is now possible to link the information from the Servo Plunger
SW with the Feeder and therefore have an online GOB weight control for
each machine cycle. The mechanism is made up of a standard Siemens
servo Motor, of screw-spindles, nut, and a brace which joins and keeps the
single Plungers in the right centre distance. The stroke repeatability and
positioning accuracy of the plunger is within some 1/100 of an mm possible.
Inductive sensors are protecting the plunger against collision and are for
referencing of the plunger.
MyCatalog
MyCatalog
COMPANY NEWS
Sklostroj Servo Plunger mechanism SP-08
Sklostroj has developed as one of the first companies a Servo Plunger mechanism. This
complete new mechanism can work for 1 up to 4 GOBs. The Servo Plunger is developed
to handle up to 25 cycles/minute, regardless of which process or product. Also because
of the servo driven mechanism it is now possible to link the information from the Servo
Plunger SW with the Feeder and therefore have an online GOB weight control for each
machine cycle. The mechanism is made up of a standard Siemens servo Motor, of
screw-spindles, nut, and a brace which joins and keeps the single Plungers in the right
centre distance. The stroke repeatability and positioning accuracy of the plunger is within
some 1/100 of an mm possible.
Inductive sensors are protecting the plunger against collision and are for referencing of
the plunger.
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
1390
glasstec
glasstec
Create user account
MyCatalog
MyCatalog
We decided to upgrade the IS machines with CD 108 mm (4 ¼ ) according to continuous
demand from the sphere of small containers production (whether for pharmaceutical
industry or parfumery). This distance is at your disposal on the highest technological
level and contains besides others:
- Servo gob distributor
- Servo invert mechanism of 2nd generation SI-06
- Servo take-out
- EP 97-04
- MAC valve box design 2008
- Axial cooling 360°
- LPBB technology
- SVE-2 supersonic vacuum ejectors for blank mould
- Pressing control system PPCS with proportional valves
and last but not least - the new drive and hot end control system SST 06 based on the
platform of elements SIEMENS. The first IS machine with this CD (in latest technical and
technological level, including the servo feeder) will be installed at a glassworks in July
2008.
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
1391
glasstec
glasstec
Login Code:
Password:
Create user account
MyCatalog
MyCatalog
MAC valve block was installed at HS Wymiarki glassworks in Poland on the 2nd section
of IS machine AL118-2-2, where the highest thermal conditions were expected.
The block has worked without any problems till now and we could say that it has been
fully tested and now it is prepared as a standard version for new AL machines.
The valve block is supplied by specialized company MAC Valves. The MAC VALVES
have a high working life, are absolutely reliable and accurate, also by working in such
hard conditions i.e. glass containers production. The use of the valve block MAC brings a
lot of advantages:
- Easier IS machine adjusting: thanks to shorter and constant reaction time of valves
- High flow, that is why particular operations are shortened
- Reduction of the number of the shutdowns caused by a valve fault (warranty 100mil.
cycles by the temperature 100°C)
- High resistance to impurities and compressed air oil
- High temperatures resistance
- Easy valve exchange
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
1392
glasstec
glasstec
Login Code:
Password:
Create user account
MyCatalog
MyCatalog
KOMPAKTSAFE
Das kompakte Schubfachlager in Schweisskonstruktion. Anlieferung in
fertig montierter Ausführung.
SMT Lager- und Transportsysteme GmbH
Address Syker Str. 205-213
27321 Thedinghausen
Germany
Telephone +49 4204 174795
Fax +49 4204 174797
Internet Address www.smtlog.de
http://www.smtlog.de
MOBISAFE
Fächerwagen zum Lagern, Transportieren und Sortieren. Ideal für
Anwendungen von der Produktpräsentation bis zur Organisation des
Zuschnittprozesses.
Booth Hall 12 D15
PRODUCT OVERVIEW
PRODUCT DETAILS
LAGERWAGEN
Lager- und Transportwagen in Ausführung nach Kundenwunsch. Ideal für
Lager- und Produktionsorganisation.
PALETTENGESTELLE
Die super preiswerte Lösung für Lagerung und Transport von hauptsächlich
Serienprodukten. Lieferbar in vier verschiedenen Ausführungen.
1393
glasstec
glasstec
MyCatalog
MyCatalog
the shear blades, and control the development of bacteria and fungi.
GTG-A und FTG-L
Tausendfach bewährt
Unsere Glas-Transportgestelle in A-Form oder unsere
Fenstertransportgestelle in L-Form
haben ihren vielfältigen Einsatz
und sorgen für sicheren Transport mit hoher Ladekapazität!
Special Ceramics (P) Ltd.
Address C-13/12, SECTOR-3 ,, ROHINI
110085 DELHI
India
Telephone +91 11 27521174; +91 11 27521910
Sogelub S.A.
Fax +91 11 27525580
Internet Address www.specialceramics.in
Address Rue de la Terre a Briques 13
7522 Marquain
Belgium
EMail [email protected];
[email protected]
Booth Hall 13 E73
Telephone +32 69 590949
Fax +32 69 214474
Internet Address www.sogelubglass.com
PRODUCT OVERVIEW
PRODUCT DETAILS
Booth Hall 14 A02
PRODUCT OVERVIEW
02.11.08.03 Chemical coolants
02.11.08.04 Chemical rust prevention agents
02.11.08.06 Chemical cleaning agents
PRODUCT DETAILS
Shearspray lubricants
Our range of water-soluble fluids, SOGEVER® GREEN HV, combine
lubricating efficiency with adaptability to working conditions and respect for
the environment. They provide an excellent shear cut, reduce the wear on
SCL REFRACTORIES
SPECIAL CERAMICS (P) LTD. has been continually striving to provide
better and superior refractories to the Glass Industry by incorporating
state-of-the-art technology and implementing stringent quality control
measures. This is well illustrated by our ever-expanding range of distributor
& forehearth refractories and feeder expendables in addition to furnace and
regenerator refractories. High performance forehearth and long life feeder
expendables are the recent developments.
SPECIAL CERAMICS (P) LTD., offers Mullite quality bricks and blocks
under its brand SCL-MUL which contains minimum 92% Mullite phase in
the matrix. These bricks give excellent service when used in walls and
crowns of port and regenerator.
Direct-bonded dense zircon refractories from SCL have very low levels of
alkalies and alumina. These bricks give excellent results in the neutral layer
of the melter walls.
The bottom blocks for melter and distributor in Sillimanite and fireclay
qualities can be six-face ground, pre-assembled and marked as per the
1394
glasstec
glasstec
drawings at our end before despatch. This ensures perfectly-matched joints
and trouble-free furnace campaign. Rider arches and dog house flat arches
are also pre-assembled to close tolerances.
SCL provides complete solution for distributor and forehearth refractories.
These refractories are mainly selected on the basis of quality of glass to be
produced and expected life. As these refractories comes in contact with the
molten glass just before the exit, they leave their 'imprint' on the quality of
glass. Higher resistance to 'seeding' and corrosion provide better
production efficiency of quality glass and longer life of the refractories. SCL
has designed a unique bonding system to attain these unique
characteristics in accordance with international quality standards.
MyCatalog
Stewart Engineers
Address 27560 Cahill Road
48134 Flat Rock, Michigan
USA
Telephone +1 734 7831003
Fax +1 734 7831004
Internet Address www.stewartengineers.com
Some of our quality products and their special features in this area are :
Now Feeder Channels are also supplied in SCL-99 quality containing 99.5
% alumina, in addition to our standard qualities SCL-33 and SCL-90. This
quality consists of entirely alpha alumina phase with excellent corrosion
resistance.
Booth Hall 13 C15-1
PRODUCT OVERVIEW
Channels and cover blocks are ground , matched and pre-assembled with
close tolerances
Dense blocks in 94% Alumina and 99% Alumina qualities are supplied for
distributor side walls and bottom paving. These blocks have excellent
corrosion resistance to glass and provide zirconia-cord free glass.
Cover blocks for forehearth and distributor are supplied in one, two or
three pieces for easy installation and operation.
Fused silica bricks are provided in different sizes for special application
and hot repair of silica crown. Fused Silica patching mass is also provided
to repair smaller areas.
SCL has a unique capability to manufacture large pre-cast single shapes
each weighing more than 600 kgs.
SCL offers Alumina-chrome tiles for hot repair of the melter at the glass
level.
SCL has Innovated a unique technique to fix inconel liner in the orifice ring
for high temperature boro-silicate glasses to improve the performance
considerably.
SCL has developed an exclusive computer-aided model for particle size
distribution to ensure consistency in various properties of the refractories.
http://www.specialceramics.in
MyCatalog
02.06.06 UV-Absorption - Coating (pyrolytic)
PRODUCT DETAILS
Float Glass Technology
AcuraCoat pyrolytic coating technologyUltra thin glass forming - 0.55
mmThick glass forming - 19 mmAutomatic temperature profiling - Hands off
operationAutomatic tweel - Hands off operationFloat bath proprietary
models
Atmosphere system sizingComputer generated batch formulasThree
dimensional float bath model developed in CADTop roll machine speed and
angle modelGraphite liner innovationBottom cooling system
innovationSuperior refractory spacingRobust atmosphere system with
superior distributionModular components with simple installationFloat bath
laser thickness gaugeTop roll side seal innovationDocumentation, detailed
1395
glasstec
glasstec
MyCatalog
manuals
MyCatalog
Nur eines ist besser als das einfache Rohr:
STG Software & Technologie Glas GmbH Cottbus
Address Kiekebuscher Weg 14
03050 Cottbus
Germany
Telephone +49 355 590200
Fax +49 355 541124
Der STG EsDeNOx-Gasbrenner passt sich der Freistrahlgestalt präzise an
und erzeugt turbulenzarme Verbrennung mit niedrigen
Flammentemperaturen. Zweistufige Strahlführung ermöglicht die
Einstellbarkeit der Flammenlänge und Ausbrandgeschwindigkeit.
Vier Baugrößen
decken den Leistungsbereich von 20 bis 750 Nm3/h ab. Durch
Eigenkarburierung wird die Energieabgabe an Glas und Gemenge
intensiviert, Flammen- und Gewölbetemperaturen werden bis zu 50 K
gesenkt,es entsteht weniger Stickoxid, geringere Abgastemperatur senkt
die Abgasverluste.
Internet Address www.stg-cottbus.de
Booth Hall 15 C05
PRODUCT OVERVIEW
05.01.02.02 Measurement, control and inspection of gas compounds
PRODUCT DETAILS
STG EsDeNOx-Schwerölbrenner
Die Anforderungen der Stickoxidminderung gaben Veranlassung,
vorhandene Ölbrenner an Glasschmelzwannen zu modifizieren. Im
Verlaufe mehrjähriger intensiver Entwicklung stehen heute
energiesparende und NOx-mindernde Brennerkonstruktionen für Heizöl zur
Verfügung, die in ihren Leistungsparametern ebenso wie in ihren
Wartungseigenschaften früheren Konstruktionen erkennbar überlegen ist.
Die Brennerkonstruktion mit exakt zentrierten Strömen von Öl und
Zerstäubung erzeugt ein enges Tropfengrößenspektrum, vermeidet eine
heiße Flammenwurzel mit hoher NOx-Bildung, und ermöglicht so die
turbulenzarme, flächendeckende Führung der Ölflamme, niedrige
Flammentemperaturen mit spürbar geminderter NOx-Bildung.
Der Brenner ist für Gas- oder Druckluftzerstäubung erprobt. Als
Nebenwirkung der NOx-Minderung sind neben Energieeinsparung auch
die deutliche Senkung des Druckluftbedarfs und Wartungszyklen von
mehreren Monaten bis zu einem ganzen Jahr erreichbar.
FlammaTec - FlexBurners
Strada S.r.l.
Address Via Ada Negri, 12
20081 Abbiategrasso / Milan
Italy
Telephone +39 02 94966977
STG EsDeNOx FreeJet Gasbrenner
Fax +39 02 94969351
Internet Address
Booth Hall 14 D50
1396
glasstec
glasstec
PRODUCT OVERVIEW
MyCatalog
MyCatalog
COMPANY NEWS
During the Trade Fair www.stradamoulds.it is going to be released.
PRODUCT DETAILS
Eine Auswahl
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Create user account
1397
glasstec
glasstec
Studio 1 Automazioni Industriali s.r.l.
Address Via Radici in Monte, 15
42014 Roteglia / RE
Italy
Telephone +39 0536 851243
Fax +39 0536 851761
Internet Address www.studio1srl.it
MyCatalog
SVEMA s.a.s.
Address Loc. Cipressino, N°36
50021 Barberino Val D'Elsa / FI
Italy
Telephone +39 055 8079004
Fax
Internet Address www.svema.it
Booth Hall 15 F50
Booth Hall 14 D64
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
SCREEN PRINTING
02.11.01 Tools
PRODUCT DETAILS
Semiautomatic blowing machine type SFL100
1398
glasstec
glasstec
MyCatalog
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
Rotary table pneumatic press
Rotary table pneumatic press with the multi indexing working positions, with
the piston economizing the energy for the pressing thrust.
ROLLER BEARINGS
Our roller bearings are used for the bottles and jars inspection.We provide
roller bearings with different bore, diameter and thickness sizes adapted to
the type of inspection machine.
Roller bearing are suitable for inspection machines SGCC, EMHART, OI
equipment
http://www.systemres.fr/catalogue/cat6_en.php
http://www.systemres.fr/en/index.php?lang=en
FOAM BELTS
Our foam belts are used in inspection machines to guide and maintain the
bottles during the process.
We can provide a large range of different foam belts for any type of
machine (PU belts, Rubber belts...) and with any foam thickness.
System RES S.a.r.l.
Address 1009, chemin Vert
59670 Winnezeele
France
Telephone +33 3 2843-3950
Fax +33 3 2843-3893
Internet Address www.systemres.fr
Booth Hall 13 C33
The foam belts are generally used for inspection machines like INEX ,
EMHART, MSC, AGR, KRONES...
RUBBER BAGS
The rubber bags (inflating tubes) are used for the gripping of the bottles in
order to palletize them.
We provide a large range of different types of rubber bags (inflating tubes)
which vary according to the shape of the bottles.
More info : For special bottles, we can help you to find the most suitable
rubber bag (inflating tube).
1399
glasstec
glasstec
VACUUM PLATE
The vacuum plates are used by the bottling industry for the palletizing
(depalletizing) of the jars.
The vacuum plates are mounted on palletizing machines, robots which are
used for the packing of the jars on pallet and on depalletizing machines
used for the removing of the jars from the pallet.
The vacuum plates can be drilled further to the diameter of the jars.
Talamoni s.n.c.
Address Via Menconi, 3
28877 Ornavasso / VB
Italy
Telephone +39 0323 836198
Fax +39 0323 836900
MyCatalog
MyCatalog
Talamoni will be presenting an oil formulated from our technicians that
permit to control the number of micro-fractures that occur in the different
cutting phase. The range of talamoni's lubrificants includes 4 types of oil
with different characteristics: low, medium, normal, high and super
vaporability to choose in relation of the type of glass working process.
http://www.talamoni.com
TECHGLASS Sp. z o.o., Przedsiebiorstwo B.P.H.
Address 114 J. Lea Str.
30-133 Kraków
Poland
Telephone +48 12 6375862
Fax +48 12 6379688
Internet Address www.techglass.pl
Booth Hall 12 D75
Internet Address www.talamoni.com
Booth Hall 9 G41
PRODUCT OVERVIEW
PRODUCT OVERVIEW
04.02 Cutting, grinding and drilling tools
PRODUCT DETAILS
Lubrificants for automanic and manual cut
1400
glasstec
glasstec
PRODUCT DETAILS
Batch plants
We design, supply, erect and start up the completely equipped batch
houses required by glass plants
The complete scope of Techglass offers relevant to forehearths includes:
Design
Of the complete raw materials mixing line,
Of the steel structure
Of the complete batch house equipment required for its operation in
accordance to the contract agreement
Manufacturing
of the steel structure
of the silo for raw materials,
of the transportation systems for the raw materials into silo,
of the dosing and weighing systems for the raw materials,
of the transportation systems for the raw materials from silo to mixers
of the transportation systems for the batch from mixers to batch hoppers
of the dust collecting systems
of the Instrumentation and Control systems
Supply
of the batch house steel structures
of the silo for the raw materials,
of the dosing and weighing systems for the raw materials,
of the transportation systems for the raw materials and batch,
of the mixers
of the dust collecting systems
of the Batch House Instrumentation and Control systems
Services
Installation of the batch house steel structure,
Installation of the silo for raw materials,
Installation of the transportation systems
Installation of the weighing system
Installation of the batch mixers
Installation of the Batch House Instrumentation and Control systems,
Start up of the Batch House Instrumentation and Control systems,
Setting up of the operational parameters,
Personel training
After sale service
Forehearths
MyCatalog
MyCatalog
Techglass offer includes the forehearths of daily capacity of 140 tones of
the container glass as well as forehearths for special applications, for
example 15 meters long with daily pull 15 to 30 tones of glass.
The bottoms and the superstructure roof covers of the offered forehearths
as well as the state of the art combustion and cooling systems are
designed to allow for easy glass temperature control in separate
forehearth's zones.
Depending on the requirements the foreherths are equipped with radial or
indirect cooling. In the second case special chimney mechanism allows to
balance cooling for each side of the forehearth.
The glass conditioning zone of the forehearth is axially split so that
combustion system operates in this zone independently for left and right
side.
Our offer includes also the forehearths equipped with the mechanism to
control their elevation level, which proved to be very useful especially in
case of significant glass pull variation.
All the above mentioned solutions enable obtaining thermally very
homogenous glass for further processing. This can be easily proven by
measuring such parameters as maximum Delta T, Thermal homogeneity
index and efficiency.
We supply also forehearths equipped with the unit allowing to make the
color glass.
The complete scope of Techglass offers relevant to forehearths includes:
Design
of the forehearth refractory materials,
of the forehearth steel structures
of the forehearth complete equipment required to operate according to the
contract agreement
Manufacturing
of the forehearth steel structure
of the forehearth gas - air mixture combustion system,
of the forehearth radial cooling system,
of the forehearth indirect cooling system,
of the forehearth Instrumentation and Control system,
of the forehearth stirrer unit,
of the forehearth glass colouring unit
Supply
of the forehearth refractory materials,
of the forehearth steel structures
of the forehearth gas-air mixture combustion system
of the forehearth radial cooling system,
of the forehearth indirect cooling system,
of the forehearth Instrumentation and Control system,
of the forehearth stirrer unit,
of the forehearth glass coloring unit,
1401
glasstec
glasstec
of the forehearth electric boost system
Services
Installation of the forehearth refractory materials,
Installation of the forehearth steel structure,
Installation of the forehearth combustion and cooling systems,
Installation of the Instrumentation and Control system of each separate
forehearth zone
Installation of the stirrer unit
Installation of the forehearth glass coloring unit,
Installation of the forehearth electric boost system,
Forehearth heat up
Startup of the forehearth I & C systems,
Setup of the forehearth operating parameters,
Operating and maintenance staff training
After sale service
MyCatalog
MyCatalog
TEKA turbine pan-type mixers THZ are pan mixers for batching
operations, and are available in sizes from 250 to 6000 liter filling
capacities.
The mixing pan floor and the outer walls are protected by
exchangeable wear liners made of A.R. steel plate.
The spring-loaded mixing arms are mounted in the rotor head, and are
adjustable to compensate for wear.
This, plus their various angles-of-attack enhance the mix-effect,
reduce wear, and protect the drive from shock.
Depending on the application, mixing paddles, wall scrapers, and mixing
arm wear guards made of various abrasion-resistant materials
are available.
The turbine pan-type mixers THZ 250 employs permanently
TEKA Maschinenbau GmbH
Address In den Seewiesen 2
67480 Edenkoben
Germany
Telephone +49 6323 809-0
Fax +49 6323 809-10
Internet Address www.teka.de
lubricated, flanged gear motors for drive and discharge functions.
The centrally located planetary gearbox is driven by a 3-phase TEFC
motor, which is flange-mounted directly to the gearbox, in the case of
turbine pan-type mixers THZ 375 to THZ 1125 mixers,
and connected by a double
universal-joint driveshaft on turbine pan-type mixers THZ 1500 to
THZ 6000 models.
A hydraulic turbo-coupling for soft starts under load is available also.
Flanged to the gearbox, and driven by it, is a hydraulic gear pump which
constantly cycles the oil, and supplies the pressure to operate the
Booth Hall 15 H50
discharge gate(s).
PRODUCT OVERVIEW
PRODUCT DETAILS
TEKA TURBINE PAN-TYPE MIXERS Glass Batch Preparation
The discharge gate assembly, used to remove the batch from the mixer, is
a complete component bolted to the mixer pan floor.
The semi-circular gate is hydraulically operated by means of a rotating
piston cylinder. It is electrically controlled, and can be opened to any
degree desired.
Locating the pivot-point of the gate slightly inside the pan circumference
allows for a large opening and, thereby, a fast discharge.
As an option, the discharge gate can be opened, independent of the mixer
main drive, via a separate hydraulic aggregate.
Mixers THZ 375 to THZ 1125 may be equipped with up to 4 gates,
whereas 3 gates is the maximum for THZ 1125 G to THZ 6000.
1402
glasstec
glasstec
Sampling gates are available.
A protective cover encloses the mixer on top. A built-in seal makes it
near-dustproof.
Large, hinged segments with variable positioning are possible,
raised and lowered by a manual- or motorized cable winch.
On request we can supply steam injection through rotating lances.
MyCatalog
MyCatalog
The TOP-GLASS is an extra protection, essential for a long time outside
storage with very hard climatic conditions.
The TOP-GLASS sytem lays and shrinks a film sheet on the top of the load.
Then it allows :
- To avoid infiltration risks
- To get a UV rays and mechanical aggressions strenght packaging, during
pallets stacking.
http://www.teka.de
THIMON
Address Savoie Hexapole - rue Louis Armand
73420 Mery
France
THK GmbH
Telephone +33 4 79610044
Fax +33 4 79617100
Internet Address www.thimon.com
Booth Hall 13 C84
Address Hubert-Wollenberg-Str. 13-15
40878 Ratingen
Germany
Telephone +49 2102 7425-0
Fax +49 2102 7425-299
Internet Address www.thk.com
PRODUCT OVERVIEW
Booth Hall 14 A64
PRODUCT OVERVIEW
PRODUCT DETAILS
TOP-GLASS
PRODUCT DETAILS
Caged Ball LM Guide
1403
glasstec
glasstec
Four-way equal load.Self-adjusting capability.Global standard
dimensions.Low center of gravity and high rigidity.
MyCatalog
MyCatalog
MOLDTECH 6 for heavy lites with the exclusive "TIBLEND STAR" yarn
structure for less marking risks.
MOLDTECH 4 for high quality work , thanks to the TIBLEND DUO
structure.
MOLDTECH 3 for high porosity need, intermediate and smaller run size.
"TIBTREMP" & "TIBLOCH" QUENCH TAPE or FABRIC
please come and discover our new range of quench tapes or structures!
TIBTECH innovations
SLEEVES For conveyor rollers protection
TIBLEND-SLEEVE :
Technical Sleeves - available in pure stainless steel or blends with PBO or
Aramid,
ELASTISLEEVE: Very high permanent radial elasticity Sleeves:
Address 252 rue de Bondues
59700 Marcq en Baroeul
France
Telephone +33 6 23616951
Fax
Internet Address www.tibtech.com
Booth Hall 13 F01
PRODUCT OVERVIEW
Their main interest is:
facilitate maintenance work with easy removing and change of roller
covering.
spring effect on a thicker structure allowing better shock absorbtion in case
of glass dropping.
adjustable to variable diameters
TECHNICAL BRAIDS and NARROW FABRICS,
high temperature seals
gripping devices, specially in hollow glass applications
spacers or conveyor rollers covering
http://www.tibtech.com/products.php
02.03.04 Glassfrosting
PRODUCT DETAILS
HEAT RESISTANT MOLDING MATERIAL
Heat resistant fabrics for glass transformation
The New MOLDTECH family : Stainless steel separation cloth for car
glass industry:
- High temperature withstanding : can resist up to 700°C in furnace
environment
- exists in different structures and weight per m², to optimize technical
issues as run size or to avoid glass marking in case of small radius
1404
glasstec
glasstec
MyCatalog
COMPANY NEWS
The new MOLDTECH 6 has been engineered to be a good
alternative to the highest quality separation cloth for longer runs or high complexity lites,
through four major factors:
The exclusive TIBLEND yarn, allowing a rather strong core structure and a very
smooth covering surface, designed to reduce even further the risk of marking, even for
small bending radius or rather heavy glass load.
An optimized "star-ply* yarn structure, allowing a excellent yarn balance and
homogeneous wear, leading to a good glass quality for a long life time.
A high fabric weight but soft structure of 1100gr/m2, that is allowing good run size or
rather heavy load.
Our optimized knitted structure, spreading evenly the pressure load on more
homogeny contact surface.
MyCatalog
Create user account
Tiffany Glas Kunst GmbH (TGK)
Address Helleforthstr. 18-20
33758 Schloß Holte-Stukenbrock
Germany
Telephone +49 5207 9128-0
Fax +49 5207 9128-40
Messe Düsseldorf
for Exhibitors
Ident No.:
Stand Order No.:
Password:
Phone:+49/211 4560-400
Login Code:
Password:
Internet Address www.tgk.de
Booth Hall 9 D04
PRODUCT OVERVIEW
02.01.02 Glass saws
03.01.09 Antique and coloured glass
03.01.12 Decorative colored glass
03.01.15 Cross out glass for melting/Fusing glass
03.01.16 Glass for restoration work
03.10.01.01.07 Machinery/tools
03.10.01.04.04 Nano coating technology
PRODUCT DETAILS
PROVETRO-Ofen GT4050
with HAN-D7 connection socket for Bentup controller. Kiln for beginners,
can be used anywhere with a standard electrical socket 230 V / 16 A.
1405
glasstec
glasstec
Toledo Engineering Co., Inc.
MyCatalog
MyCatalog
PRODUCT DETAILS
Address 3400 Excecutive Parkway
43606-0927 Toledo, OH
USA
Telephone +1 419 537-9711
Fax +1 419 537-1369
Internet Address www.teco.com
Booth Hall 13 A17
Electric Boost
The TECO Group designs and constructs electric boost systems to meet
the clients' requirements for melting capacity, emissions reduction and/or
glass quality improvement. TECO can provide a wide range of boost
systems, such as:
Single, two or three phaseBottom, side wall or top entry electrode
systemsWide range of frequenciesElectrodes installed at hot spot or under
blanket typeInstalled with original furnace, at rebuild of a furnace or while in
operationElectrodes made of molybdenum, tin oxide or other type
depending on type of glassComplete line of bottom, side wall and top entry
electrodes
PRODUCT OVERVIEW
UAS Messtechnik GmbH
Address Prof.-H.-Staudinger-Str. 4
94234 Viechtach
Germany
Telephone +49 9942 9486-0
Fax +49 9942 9486-10
Internet Address www.uas.de
Booth Hall 15 G44
PRODUCT OVERVIEW
1406
glasstec
glasstec
PRODUCT DETAILS
Low Nox Technology
The first NOx regulation by taking the CO value into account
NOx reduction by 10 to 18 %
Stable controlling method of the glass furnace
Smoothening of CO peaks
No overheating of chambers
Energy saving
Balancing the O2 content in the combustion air over the entire
production phase
Tested for TA air compatibility.
By taking the CO content into account, UAS Messtechnik GmbH has
successfully developed and used a system for primary NOx reduction.
The excess air factor was reduced considerably by using the new UAS
technology, which in turn resulted in remarkable energy saving. Daily
manual corrections, which are required even with the latest MSR
technology, in the ratio control for optimising the operation are omitted.
NOx pollutant values are stabilised in the lower range; exhaust gas values
are stabilised and smoothened collectively.
Since there are no large temperature fluctuations in the top furnace, a
uniform controlling method is achieved.
Overheating of chambers has not been detected after installing this system.
This system is suitable for U-flame furnaces as well as cross-frame
furnaces.
Remote diagnosis (modem) provides an option of optimising the burner and
localising the error while analysing the exhaust gas from outside.
With this system, UAS has achieved significant reduction in interference
effects in the field of fed combustion energy. It can also be used for
reducing the flammability and flame combustion in the glass melting
furnace.
MyCatalog
MyCatalog
Use of oxygen in glass melting furnaces
Reduced NOx emissions
Reduced use of primary energies
Better glass quality
Lower investment costs
The use of oxyfuel /oxygen systems reduces NOx as pure oxygen is used
for combustion.
As against conventional air-fired furnaces, the considerable advantages
are, reduced NOx emissions, reduced use of primary energies, better glass
quality and lowered investment costs due to the exclusion of regenerators.
The particle emission reduces considerably owing to lower less exhaust
gas flow in oxyfuel fired furnaces: As compared to air-fuel fired furnaces,
the fraction resulting due to dust is reduced by approximately 70 % and the
fraction resulting due to condensation of volatile components is reduced by
30-50 %. Considerably stringent requirements are however applicable for
control technology tasks and equipment. Software and hardware are
always refined for all glass melting furnaces of UAS Messtechnik that have
been equipped with oxygen technology. In case of measuring technology
equipment, this results in a standard situation that ensures high-precision
regulation of the fuel-oxygen mixtures.
Oxyfuel firing has reduced the NOx content in the exhaust gas from
approximately 800 to 2500 mg NOx per m3 of exhaust gas to 250 to 280
mg NOx per kg of molten glass!
UNGRICHT Roller + Engraving Technology
Address Karstr. 90
41068 Mönchengladbach
Germany
Telephone +49 2161 359-0
Fax +49 2161 359-100
Internet Address www.ungricht.de
http://www.uas.de
Booth Hall 9 D72
Oxyfuel/ oxygen systems
1407
glasstec
glasstec
PRODUCT OVERVIEW
MyCatalog
MyCatalog
Valoref
03.01.04 Cast glass, ornamental glass
03.01.09 Antique and coloured glass
PRODUCT DETAILS
Emembossing rollers and smooth rollers
For the manufacturing of decorative- and figured glass, we offer embossing
rollers and smooth rollers, which are suitable for high temperature
applications. Furthermore we supply rollers with ceramic coatings
particularly developed for cooling sections.
During glass structuring by embossing rollers, liquid cast glass is led
through a rotating couple of rollers. The roller couple either consists of one
embossing roller and one smooth roller or of two embossing rollers, which
emboss the glass with the required structure.
Some fields of application for decorative- and figured glass are: structured
glass doors, partition walls, furniture, shower rooms, windows, balustrades
and balcony separations.
Many well-known structures are developed by Ungricht in cooperation with
our customers.
It would be a pleasure for us to develop also new structures with you.
http://www.ungricht.de/public/industriebereiche.html?lang=de&id=23
Address Z.I. la Croisière
84500 Bollene
France
Telephone +33 4 90405000
Fax +33 4 90405001
Internet Address www.valoref.com
Booth Hall 13 D35
PRODUCT OVERVIEW
02.12.02 Treatment of auxiliary materials
PRODUCT DETAILS
Refractory products
Shaped products
For consumers of refractory products, Valoref commercialises not only new
shaped products, but also products originating from a valorisation process.
These products are available individually or as sets (complete under layers
of hearths, day-tank, glass furnaces, etc...)
Valoref has a very large stock of refractory products (silicon, insulating
materials, aluminous, electrocast, zircon, magnesium oxide) in different
forms (bricks, slabs or shaped parts such as quarl blocks or furnace
arches). Part dimensions can be modified in Valoref's machining shop
(equipped with debiteuses, diamond-powder coated sawblades, polishing
machines), while our design office produces furnace erection diagramsand
construction drawings.
Unshaped products
Valoref makes also available various unshaped refractories originating from
stock excesses. The product range includes refractory castables, ramming
mixes, cements and mortars of different sources.
1408
glasstec
glasstec
Van Huët Glass Logistics
Address Koelenhofstraat 5
4000 JR Tiel
Netherlands
Telephone +31 344 673782
Fax +31 344 673783
Internet Address www.vanhuet.com
Booth Hall 11 A67
PRODUCT OVERVIEW
03.01.01 Float and mirror glass
PRODUCT DETAILS
MyCatalog
MyCatalog
VESTA / ÖZMAK Mühendislik Mimarlik San. ve. Tic. Ltd. Sti.
Address Güzelyali Mah. Sahilyolu Cad. Defne,
So
k No:9 Pendik
34903 Istanbul
Turkey
Telephone +90 216 3925213
Fax +90 216 3921944
Internet Address www.vesta-kilns.com
Booth Hall 9 D33
PRODUCT OVERVIEW
Innenlader (Floatliner)
* Für Glastransport auf A und L Gestellen
* PLF (6.10 x 3.21 M.), DLF (3.21 x 2.55 M.)
* Autoglas
* Allen "Prise-au-sol" (voll absenkbar)
* Max. Ladelänge: 8.00 M.
* Max. Ladehöhe: 3.35 M.
02.09.04 Autoclaves
PRODUCT DETAILS
GBK / ECO SERIES
GFK / TNL SERIES
1409
glasstec
glasstec
MyCatalog
MyCatalog
Mechanical working, backed up by electronic servo drives, that allow
smooth motions with speed variation.
Smooth forward, side and upward displacement motions, independent upon
3 axles (X,Y,Z), made by servo motors.
Displacement is made through a sphere shaft with sliding upon guides with
skate-type bearings.
Forward displacement: up to 500mm.
Side displacement: up to 550mm.
Upward displacement: up to 500mm.
Vidromecanica
Address Rua Central, 22 - Garcia
2430-905 Marinha Grande
Portugal
Telephone +351 244 555060
Fax +351 244 552410
Internet Address www.vidromecanica.com
Booth Hall 14 D02
PRODUCT OVERVIEW
Push-bar width: up to 5500mm.
Installed power: 9.5 kW, 380 V ... 500 VAC, 50-60 Hz.
Electric panel with programming operator panel and PLC to define the cam
adjustment
HOT- END COATING SYSTEM, VERSION 2001
MODELS NO. VTSQ 12/13/14
It provides the glass container hot-end coating treatment, leaving a thin
coating of tin oxide, on the surface of the containers, thus increasing the
surface strength and abrasion resistance.
Features:
· 2 Side chambers with 2 recirculation motors each, which create inside 2
loops for the product flow around the glass containers.
· 1 Recovering fan placed at the tunnel exit, allows to profit the exceeding
product.
· 1 Adjustable height mid-section with purge air to give finish protection.
· 1 Product vaporizer.
· 1 Product dosing system.
· 1 Fume extraction.
· Forced cooling for high production rates.
· Internal heating for low production rates and production start.
Installed power:
- Motors 3.0 kW, 220/380/480V, 50/60Hz
PRODUCT DETAILS
STACKER WITH 3 AXLES, (X,Y,Z), MODEL VSTC - 04
- Heating elements: 9.6kW
Dimensions of mid-section:
- Width (W) - 160/180/200/220 mm.
1410
glasstec
glasstec
MyCatalog
- Height (H) - 360 mm.
- Length (L) - 1250/1750/2250 mm
UNDER BELT GLASS CONTAINER COLD END COATING
This equipment provides cold end spray coating of glass containers with
dilute polyethylene wax emulsions, from under the lehr belt, to provide a
surface layer to allow easy handling of the glass articles.This method of
spraying may be used with overhead spraying to provide additional
continuous coating for bottles or when used alone avoids entry of the spray
mixture into the jar or bottle.
Features:
· Bridge under the lehr conveyor belt equipped with sliding guides for spray
gun trolley.
· Spray gun trolley with vertically set up spray guns.
· Pneumatic set up for spray guns.
· Control panel with traverse speed adjustment by frequency converter.
· Installed power: 0.25 kW at 380-415/440-480 V, 50/60 Hz.
Viprotron GmbH
Address Lise-Meitner-Str. 10
64293 Darmstadt
Germany
Telephone +49 6151 8002130
Fax +49 6151 8002131
Internet Address www.viprotron.com
Booth Hall 14 C06
PRODUCT OVERVIEW
02.08.01 Complete plant for insulating glass production
MyCatalog
PRODUCT DETAILS
Quality-Scanner-IG
In modern production process of insulated glass a reliable visual inspection
is indispensable to avoid cost intensive customer complaints. Present-day it
is standard to trust nearly exclusive in manual inspection. But such human
controls are not only extremely expensive, but also only restrictively
consistent. At the same time the expectations increases to rely 100% on
the quality. State of the art vision systems are today able to automate such
tasks with convincing results and also displace human inspectors for other
assignments.
With the Quality-Scanner-IG is now a low cost quality control system
available equipped with this innovative technology. Together with the
newest generation of intelligent CCD-cameras and an intuitive Windows
based user interface, the Quality-Scanner-IG takes charge of a reliable
In-Line quality control. Directly integrated into the production process of
insulated glass, this high performance system allows to guarantee your
customer a consistent and reproducible quality of the glass independent of
human motivation and abilities. Simultaneously a detailed documentation
and archiving of the quality is achieved which allows you to prove the exact
inspection details of a specific glass unit after even several months.
Furthermore the Quality-Scanner-IG offers enough potential to optimise
your productivity which automatically conducts to a preventive avoidance of
glass defects.
All visual defects like e.g. bubbles, scratches, stones, coating defects, tin,
dirt, finger prints, foil defects, etc. larger than 0,5 mm² will be easily
detected by the Quality-Scanner-IG. The user friendly Windows interface
allows you to define and illustrate the exact quality settings according to the
specific requirements of your customer.
The Quality-Scanner-IG which is completely integrated in the production
line after the washing machine, stops rejectable glass or gives a warning
signal before the glass will be further assembled. On the screen the
rejected glass will be visualized in details by displaying the precise
calculated defect positions within the defined quality zones. With such a
detailed visualisation your employee will easily be able to immediately
locate the defects on the glass. By integrating the Quality-Scanner-IG in
your production line you not only gain a high performance tool for improved
1411
glasstec
glasstec
quality and productivity but also customer satisfaction and confidence.
http://www.viprotron.de/doc/Viproton_GPD_2005.pdf
Vision Electric GmbH
MyCatalog
MyCatalog
VITRUMA GmbH & Co. KG
Address Alte Ludwigsstädter Str. 4a
96317 Kronach
Germany
Telephone +49 9260 990112
Address Business Park Schwanenmühle
66851 Schwanenmühle
Germany
Telephone +49 6307 91255-0
Fax +49 6307 91255-27
Fax +49 9260 990138
Internet Address www.vitruma.de
Booth Hall 14 A41
Internet Address www.vision-electric.de
Booth Hall 13 E40
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT DETAILS
PRODUCT DETAILS
Vision®Bar
Vision®Bar is the type-tested standard busbar system fulfilling the
requirements of IEC 439 - EN 60439 - DIN/VDE 0660 - EN NF 60439.
Advantage of Vision®Bar:
The combination of rigid and flexible parts is a technical advantage, which
reduces the total installation time of a busbar connection. Our customers
value other product features as important advantages like enclosure made
of aluminum instead of steel, the mounting rail along the four edges and the
possibility to change the protection degree within one busduct run.
WALTER SPH Hydraulic two-column spring cage glass press
Year of construction: 1970
location: Germany
technical details:
complete with built-in hydraulic unit,
ready for operation, electrical installed,
but without hydraulic oil,
distance between column centres 650 mm,
pressing capacity 2,5 tons,
dwell pressure,
incl. equipment for pressing with extremely low pressing power
Vision®Bar combines good technical values along with excellent cost
effectiveness. Vision®Bar is available with copper or aluminum conductors
in ranges from 1200 A up to 9000 A nominal current. IP31, IP42, IP54 and
IP55 are the standard protection degrees of the aluminum enclosure.
Vision®Bar is designed for a nominal voltage of 1 kV.
1412
glasstec
glasstec
MyCatalog
MyCatalog
VSS - engineering comp. GmbH
Address Radcina 18
161 00 Prague
Czech Republic
Telephone
Fax +420 2 20561654
Holder for horizontal using
Internet Address www.electrodeholder.com
Booth Hall 13 B62
PRODUCT OVERVIEW
PRODUCT DETAILS
Cooler Pt reservoir
Holder for vertical using
Holder labyrint - vertical, horizontal using
Holder - labyrint
1413
glasstec
glasstec
SnO2 elektroda
These SnO2 conectors are produced in folowing diameters:
MyCatalog
MyCatalog
und Ni erzeugt, unterer Teil ist von Mo,beide Teile sind mechanich, durch
specielle Dichtung und präzis bearbeitene Flächen passend, dicht
verklemmt,im unterem Teil des Halters ist der Heizteil mit Gewinde für die
Haftung der Elektrode angebracht,in den Halter ist von Au3en ducht
Regulationsventil das Kühlmedium (Wasser mit 5N) eingeführt,beim
Ausgang ist ein Durchfluss- und Mengekontrolleur des Kühlmedium
instaliert. Er signalisiert Störung beim Durchfluss (Anlage gehört nich zu det
Teil des Konstuktion und der Lieferung TOP Elektrode),der Eingang des
E-Strom ist herumgeführt durch einen Flexibelkabel zur gechwei3te
Klämme, au3 des Rohr, die der Eingang des Kühlmediums benützt.
Vorteile:
Beim Kureisetzen in der Betrieb, der TOP Elektrod, wenn die
Rekristalisation des MO nicht so vortgeschritten ist, kann man nach die
Reparation der Dichtung und nach dem Wechseln. Die Konstuktion macht
die Aplikation der MO Elektrode beim Durchmessser 32,50,60mm möglich.
Von grö3eren Durchmessser der Heizteilen, ist seht wichtig den
Durchmesser des Halters vergrö3ern.
D = 65 mmD = 88 mmD = 150 mm
Watersoftener
TOP electrode
Molybden TOP Electrode für den Schmelzprocess der Glasmasse im E Ofen
Molybden TOP electroded ist für die Aplikation der Schmelzung der
Glasmesse im vollelektrischen Ofen bestimmt.
TOP Electrode:
unterbracht auf einem Kippwagen, der ihre Einführung durch der
Nebenöffnung in der Ofenwand über der Basinpalisade direkt in der
Glasmasse möglich macht,die Konstuktion des Wagens ermöglicht, wie
eine horizontale Einstellung neben quer liegenden Eletroden, so auch eine
teilnehmende winkellegn der Einstellung,der Körper des Eletrodehalters ist
aus zwei Teilen hergestellt, oberer Teil aus dem Edelstahl mit höherem Cr
1414
glasstec
glasstec
VVV MOST spol. s r.o.
Address Topolova 1234
434 01 Most
Czech Republic
MyCatalog
W. Haldenwanger GmbH & Co. KG, Technische Keramik
Address Teplitzer Str. 27
84478 Waldkraiburg
Germany
Telephone +420 777 748219
Telephone +49 8638 6004-0
Fax +420 777 706186
Fax +49 8638 810900
Internet Address www.vvvmost.cz
Internet Address www.haldenwanger.de
Booth Hall 13 B62
Booth Hall 10 G48
PRODUCT OVERVIEW
MyCatalog
PRODUCT OVERVIEW
PRODUCT DETAILS
Belt conveyors
Self-supporting framed structure conveyors, width 500, 650 and 800
mm, maximum section length 12 m, overhang 5 m
Self-supporting framed structure conveyors with sideways, width 500, 650
and 800 mm, max. section length 9 m, overhang 3-4 m
Belt conveyors for technological transportation, width 500-1200 mm, length
up to 200 m
Feeders, width 300-1200 mm
Pipe type conveyors and etc.
PRODUCT DETAILS
Pestles
A wide range of standard pestles are available for purchase online. Select
head size from 24mm to 85mm diameter and specify glazed or unglazed.
1415
glasstec
glasstec
WALTEC Maschinen GmbH
MyCatalog
MyCatalog
PRODUCT DETAILS
01.06.01 Gob feeder
Address Kronacher Str. 2A
96352 Wilhelmsthal-Steinberg
Germany
Telephone +49 9260 9901-0
Fax +49 9260 9901-99
Internet Address www.waltec.de
Booth Hall 14 A41
Servo-Feeder TSE-VGx
Feeder TSE-VG 4 × 3, four variable gob weights with three independent
plunger mechanisms.Flexible, malleable and digitally controlled plunger
stroke profiles replace the mechanical curve disc. TSE-VG 4 supplies up to
four variable gob weights with a weight range of up to +/- 35 % of the
average weight. The TSE-VGx, developed by WALTEC, has been applied
with great success in the packaging glass industry for small and medium
batch sizes. For the multiple gob operation, up to four independent
mechanisms operate on one feeder head:
In double gob TSE-VG 4 × 2In triple gob TSE-VG 4 × 3 andIn quadruble
gob TSE-VG 4 ×
PRODUCT OVERVIEW
Press Stations for reconstruction of pneumatic presses
01.06.01 Gob feeder
01.06.04 Bar feeder
02.05.04 Laser-fusing technology
1416
glasstec
glasstec
There are only few measures left to reduce production costs and increase
performance and efficiency of glass production. The deciding factors are:
piece output, net yield, job change time and energy costs. Despite a bad
energy balance, low reproducibility and repetition accuracy and long job
change times, the number of, still to-day, operated pneumatic presses is
surprisingly large. WALTEC-servo- hydraulic press systems for
reconstruction of pneumatic presses give, in this case, deciding advantages
and can be supplied as single, double, treble and multiple gob units as a
standard or according to customer-specific requirements.
Advantages of the WALTEC- Servo-hydraulic Press Systems:
Exact control of the cylinder speed and press pressure by closed loop
proportional hydraulics.Very good repetition accuracy with small cycle time
variations. Due to this, either a significant performance increase is possible
or a longer processing time is available.The energy saving compared with
pneumatics is up to 55%.All parameters can be set online on the LCdisplay for every article, stored and recalled.Online recording of the press
procedure for optimisation and diagnosis.Mechanical adjustment of the
machine is unnecessary.
MyCatalog
MyCatalog
Webber Brennertechnik GmbH
Address Landmannweg 18
44149 Dortmund
Germany
Telephone +49 2302 89089-0
Fax +49 2302 89089-10
Internet Address www.webber-brennertechnik.com
Booth Hall 14 D01
PRODUCT OVERVIEW
PRODUCT DETAILS
WALTEC spinning machine
The 1, 2 and 3-station spinning machines have especially been designed
for large articles of up to 750 mm diameter and can be operated with parted
moulds, with ring and stamping tools. WALTEC spinning machines are
supplied with automatic glass gatherer or feeder depending on the required
capacity.
Feuerpolieren
In der Glasindustrie und manchmal auch in der Kunststoffindustrie werden
Artikel mithilfe von Gas-Sauerstoff- oder Gas-Luft-Gemischen poliert. Die
hohe Temperatur der Flamme heizt die Oberfläche der Artikel so stark auf,
dass sich die Oberfläche glättet und Grate und andere Beschädigungen
vermindern.
Webber Brennertechnik bietet diese Systeme für alle Brenngase, inklusive
Wasserstoff an.
The 18-station high-capacity spinning machine produces up to 85 articles
per minute. Every single spinning spindle can be controlled separately. Due
to this, the process sequence can be ideally set for the individual article.
Acceleration values, variable speed profiles and highest speed stability
during the work process can be ensured by servo-motors.
All machines can be equipped with fully automatic vacuum suction take-out
and transportation into the annealing lehr.
1417
glasstec
glasstec
Weifang Sanjiang Glass Machinery Co., Ltd
Address No. 17 Xinyuan Road
Economic-tehnic
Zone
261031 Weifang City, Shandong
Province
China (Rep.)
MyCatalog
Wieland Lufttechnik GmbH & Co.KG
Address Wetterkreuz 12
91058 Erlangen
Germany
Telephone +49 9131 60670
Fax +49 9131 604401
Telephone +86 536 8669650
Internet Address www.wieland-luft.de
Fax +86 536 8669852
Internet Address www.sanjiang-machine.com
MyCatalog
Booth Hall 13 D65
Booth Hall 10 F74-7
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT DETAILS
PRODUCT DETAILS
Buring Machine
Sk2400-18 Automatic Jaws Burning Machine is a kind of Multibit turning
jaws burning equipment which we exploit . And develop by ourselues
according to the development of Domestic bottle production and use the
advanced techniqul of the same kind of Italian equipment . It s Functlon is
that it use flame to heat the edge of bottle rough which is pressed by punch
and mect it,then the bottle product can be smooth and glabrous. So the
Sk2400 18 is the perfect ideal kit equipment of high-speed automatic
glassware punch.
Intercept hoppers
Intercept hoppers are used in combination with industrial vacuum cleaners
or with filter hoppers in order to increase the collection capacity. Depending
on the application, intercept hoppers can have a conical form, large
discharge doors, can be designed as standard transport containers or can
have special forms or volumes according to the customer's requirements.
Suction material can be discharge continuously or discontinuously.
Frequently, intercept hoppers are required to create an optimum vacuum
system which fully complies with the customer's material handling concept.
1418
glasstec
glasstec
WITT-Gasetechnik GmbH & Co. KG
Address Salinger Feld 4-8
58454 Witten
Germany
Telephone +49 2302 8901-0
Fax +49 2302 8901-3
Internet Address www.wittgas.com
Booth Hall 12 D06
PRODUCT OVERVIEW
MyCatalog
retrofitting of MFC gas mixers is easy.
The MDE series, a timely further development from the field of conventional
analogue instrumentation, will be presented for the first time to the general
public at the GLASSTEC (21 to 25 November, 2008 in Dusseldorf; hall 12,
stand D06). However, this new generation of devices is already available
even as you read this.
Even for experienced factory managers, product changes are a touchy
business if the burner supply for separating, shaping, tempering, flame
polishing, burling or rounding must each be set individually for the product
to be manufactured. This makes it necessary to optimally adjust the mass
flow of burnable gases and to counterbalance the ever present
disturbances such as primary pressure fluctuations, burner changes and
temperature influences. By the time production is running smoothly, many
hours may well have been spent getting things right, and many more hours
devoted to fine adjustments beyond the start-up phase a procedure which
any businessman would be happy to avoid.
Product changes in the twinkling of an eye
Things go very differently when using the new MDE series, which should
now enhance the productivity of many a factory. This mixing and dosing
system regulates the supply to a burner or any other consumer with gas
mixtures consisting of two or more gases. Within this system, there beats a
digital heart which is equipped with CMos sensors and maintains contact
with the outside world via interfaces.
05.01.02.02 Measurement, control and inspection of gas compounds
PRODUCT DETAILS
MDE and MFC
A leap forward in productivity with
the digital, all-in-one gas mixer
There is an enhanced burner supply now on the market. When used in the
manufacture and forming of glass, it helps to reduce the costs incurred
during set-up and wastage during product changes. For this purpose, it is
very important to set up the mixed gas supply in such a way that it meets
your requirements.
WITT, a company specialising in gas mixing and analysing systems, now
offers a new and updated solution for this problem: the MDE product series
of fully-electronic gas mixing and dosing systems now has a revised
connection method, which is even more functional and space-saving.
By new block assembly, a lot of connection parts aren t necessary
anymore, which leads to a reduction of installation times. Furthermore the
modular design reduces delivery times because fewer parts are needed.
Using a variable connection technology various designs are possible and
MyCatalog
Unlike analogue control engineering, the control electronics developed by
the Witten-based gas technology specialists ensures exact reproducibility
of any process parameter once it has been ascertained. The deviations do
not exceed half of one percent of the final scale value, and in practice are
negligible. In terms of its control characteristics, the MDE series is a real
sprinter as it reaches the required target values in less than 0.3 seconds.
The device is equipped with an auto-calibration function to ensure rapid,
accurate flow rate control. What does this mean for production? Product
changes can more or less be performed at the press of a button, as far as
the gas is concerned. The control function counterbalances external
interference and keeps the values stable throughout the entire production
cycle. Manual re-adjustment (if the temperature changes for example) is
not necessary.
Built-in quality assurance
In the MDE series, the integrated digital RS-485 bus system allows remote
control from a PC on the serial interface, PLC machine control or the
AWE/AWS evaluation systems from WITT. The electronics allow the
machine operator to influence the flame setting while a process is in
progress or even to navigate ramps (slow increases or decreases in
1419
glasstec
glasstec
MyCatalog
MyCatalog
consumption).
The chief attraction: the MDE series delivers a continuous data flow from
the sensor to the control unit so that specific operating parameters can be
ascertained and monitored. The consumption levels of individual gases can
also be recorded accurately. In this way, the system meets the
requirements for quality and cost inspection in this area of glass production
as well.
The only system of its type, the "MFC" from WITT -Gasetechnik combines
all components required for the burner supply in a single device. Separate
backflow valves, filters and solenoid valves are already integrated into it.
This makes this WITT solution particularly easy to install. It is even easy to
combine several devices together, which can have positive effects where
space requirements and building costs are concerned. Equipped with an
integrated flame non-return finger, the MDE series meets the strictest of
safety requirements in common with all other WITT products.
http://www.wittgas.com
Sillimanite Brick
It can be used in tin bath roof, in/out seal-brick. etc.
Ying Chang Machinery Co., LTD.
Address 35, Alley 37, Lane 667,, Chung Shan
Rd., Shen Kang
429 Taichung
Taiwan
Telephone +886 4 2562-5504
Fax +886 4 2562-6320
Internet Address www.ying-chang.com.tw
Booth Hall 13 F72
Xinmi Zhongyuan Special Refractory Material Co., Ltd.
PRODUCT OVERVIEW
Address Room 2-1-0601, Downtown Plaza,
No. 116
Jiankang Road
450012 Zhengzhou Henan
China (Rep.)
Telephone +86 371 63857926
Fax +86 371 63859983
Internet Address www.floatglasstech.com
Booth Hall 10 G26
PRODUCT OVERVIEW
PRODUCT DETAILS
Alumina bubble brick
PRODUCT DETAILS
Processing Machine-YC210C
1.Variable fee can be adjusted micrometrically.
2.Continuous infeed and outeed design provides increased efficiency and
operation convenience.
3.The machine is especially ideal for sanding U-shape edge.
4.Rugged construction assures maximum stability when in hight speed
operations.
Suitable for glass size: 30 x 30mm
Suitable for glass thickness: 0.5~5mm
Feed method: Continuous infeed. Continuous outfeed.
Sanding speed: 0.7/6/(adjustable)
Work piece type is especially suitable: U-shaped edges
Diamond wheel motor: 2HP x 3
Fee drive motor: 3HP x 1
Coolant pump motor: 1/4HP x 1
Adjustable motor: 1/8 HP x 1
1420
glasstec
glasstec
MyCatalog
Machine dimension: 4800 x 1600 x 1800mm
Packing dimension: 3200 x 1600 x 1800mm
Machine weight(approx.): 3100kg
Packing dimensions: 2200 x 900 x 2100mm
Net weight: 950 kg
Gross weight: 1150 kg
Thin Glass Double Edger-YC220A+
1.The machine is designed for synchronously polishing both straight edges.
Simply entering the glass thickness and sizes,and then setting values
through the computer screen, the machine will automatically adjust to your
desired machining position.
2.The transmission system is equipped with a high precision linear motion
guide combined with synchronized running of ball screws to ensure high
machining accuracy.
3.The motors and the spindles are separated and are connected by
couplings for-vibration-free running.These machanisms combined with
linear motion guides on the slides,assure high quality polishing without line
marking.
Two Axes Automatic Glass Drilling Machine-YC340A2
1.Slideways are equipped with high precision linear motion guides.
Movement is driven by servomotor through ball screw transmission. This
assures maximum stability of machining fast operations and high accuracy.
2.The table movement is also driven by servomotor through ball screw
transmission.This allows for drilling operations twice without movement of
glass.
3.The machine employs a touch -sensing operation screen providing
humanified operations and high performance. The laser unit provides
automatic centering for various holes making operations quick qnd easy.
Suitable for glass sizes: 200 x180mm(Custom sizes available)
Glass thickness: 3 ~ 20mm
Working speed: 0.6 ~ 0.8M(Adjustable)
Total horsepower: 80 kw
Machine weight: 11 tons (A and B units plus transfer stand)
Thin Glass Drilling Machine-YC340A+
1.Double surface drilling provides stable performance without workpiece
cracking.
2.Slideways are equipped with high precision linear motion guides for
extremely stable traverse and high quality of drilling.
3.The laser unit provides automatic centering for various holes, making
operation easy and quickly accomplished.
4.The machine is equipped with a retraction device for defective
workpieces to prevent defective workpieces from being deposited on the
table.
5.Direct motor driving and micrometric adjustment of variable speed
permits for any speed change as desired.
6.The U.S. imported stabilizer is provided for spindle feed, providing a
buffering function and high machining stability.
Minimum working sizes: 100 x 100mm
Drilling capacity: 5 ~ 50mm
Table surface: 2400 x 1200mm
Spindle motor: 2HP x 2
Wash pump motor: 1/4HP x 2
Machine dimensions: 1500 x 850 x 2000mm
MyCatalog
Minimum working sizes: 100 x 300mm
Drilling capacity: 5 ~ 50mm
Distance between holes: 220 ~ 1400mm
Table surface: 800 x 250mm
Spindle motor: 2HP x 4
Wash pump motor: 1/4HP x 4
Machine dimensions: 3250 x 1900 x 2200mm
Net weight: 3200 kg
Gross weight: 3800 kg
Z&J Technologies GmbH, Zimmermann & Jansen
Address Bahnstr. 52
52355 Düren
Germany
Telephone +49 2421 691-0
Fax +49 2421 691-200
Internet Address www.zjtechnologies.de
Booth Hall 15 A26
PRODUCT OVERVIEW
1421
glasstec
glasstec
PRODUCT DETAILS
Blanket Batch Chargers
Twin-coupled charger units
Modular charger units
Electric control systems
Doghouse dust-covers
MyCatalog
MyCatalog
installation supervision and execution of repairs under a direct supervision
or by our own maintenance services
provision of steelworks with the maintenance equipment for refractory
linings
exchange of experiences during scientific and technical conferences
provision of steelworks with the maintenance equipment for refractory
linings
exchange of experiences during scientific and technical conferences
organisation of workshops and trainings for technical divisions.
Zecchetti S.r.l.
Zak ady Magnezytowe Ropczyce S.A.
Address Via Galileo Galilei, 1/1a
42027 Montecchio Emilia (Re)
Italy
Address Przemyslowa 1
39-100 Pobczyce
Poland
Telephone +39 0522 867411
Telephone +48 17 2229-222
Fax +39 0522 866034
Fax +48 17 2218-593
Internet Address www.ropczyce.com.pl
Internet Address www.zecchetti.it
Booth Hall 13 B79
Booth Hall 13 B89
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT DETAILS
Servicing and Engineering:
identification of factors destructive for refractory linings and the degree of
their influence in individual zones
laboratory and model testing
access to the latest researches and trends in the domain of refractory
materials through a constant cooperation with scientific institutes in Poland
and abroad
designing of linings and new structural and material solutions
technical and technological advice connected with the optimisation of
linings in the aspect of cost
PRODUCT DETAILS
Cold end conveyors
One unique type of side frame
particularly strong, enables the construction of both single and multiple lane
linear sections of conveyors as well as single and/or multiple lane bends,
side-to-side connections, single filers, free flow tables and so on.
1422
glasstec
glasstec
All components such as the side guide supports are mounted by using the
side frame grooves thus avoiding, for instance, drilling operations during
the installation phase with an evident time saving. The same applies to the
possible accessories such as photo-eyes, detectors and so on. In this last
case the big advantage comes from the fact that the fitting of all the
accessories can take place once the line has been completely installed.
The frame can house all types of chains and belts that are available in the
market.
Wear strips for carrying way can be in any type of material such as polished
steel, nylon, and oil-impregnated wood.
The same applies to the wear strips for return way that can be made with
plastic rollers or plastic straight sections or plastic serpentine.
The core of the side and central guides is in extruded aluminium too with
grooves in order to easily fit the supporting legs. The legs are also modular
so that these two features allow cullet conveyors to be installed wherever
is better. The same structure of the supporting legs can be used for the
installation of the cable trunking.
MyCatalog
Zhengzhou Ancai Refractory Co., Ltd
Address 96 Hanghai Road
450006 Zhengzhou
China (Rep.)
Telephone +86 371 68961920
Fax +86 371 68961870
Internet Address www.zzacrc.com
Booth Hall 10 F74-1
PRODUCT OVERVIEW
Spazio 4
The peculiar characteristic of this kind of Magazine, for which it differs from
the traditional vertical magazines, is the ability to move the trays not only
vertically (along the y axis) and crosswise (along the z axis) but also
lengthwise (along the x axis). This capability allows to determine the
machine storing capacity on the basis both of the available height and by
exploiting the width, thanks to the possibility of moving the tray sidewise.
The system looks like a composition of two or more traditional magazines
side-by-side with the important difference of using just one tray moving
trolley for the whole composition, which allows the access to all the trays
present in the magazine even from one sole bay.
MyCatalog
PRODUCT DETAILS
-
Alumian
alumina block is the compact structure formed from
-Al
2
O
3
and
-Al
2
O
3
alumina acicula and in a most ideal proportion, it has good erosion resisting
and good stability, its feature is that when touching melting glass, it
produces little stone or bubble. So,
-
1423
glasstec
glasstec
alumina brick may be widely used to the position of touching melting glass
of refiner, and may be used to the upper structure including crown
Zhengzhou Yuandong Refractory Co., Ltd.
Address Wulibao Industrial Zone, Dawei Xinmi
452383 Zhengzhou
China (Rep.)
Telephone +86 371 69275999
Fax +86 371 69276100
Internet Address www.lsyd.com
MyCatalog
MyCatalog
Zhengzhou Zhenzhong Fused Zirconia Co., Ltd.
Address No.77 Daxue Road
450052 Zhengzhou City, Henan
Province
China (Rep.)
Telephone +86 371 69251084
Fax +86 371 69251199
Internet Address www.zz-zirconia.com
Booth Hall 10 F75-5
Booth Hall 10 F75-2
PRODUCT OVERVIEW
PRODUCT OVERVIEW
PRODUCT DETAILS
PRODUCT DETAILS
Zircon Corundum Brick
Fused Calcia Stabilized Zirconia
This material is made of various grades of zirconia,
adding calcia as stabilizer, using our patent technique.
It is used to produce all kinds of Zirconia ceramic and Refractory Products,
such as Refractory setter for electro-ceramic industry, Sizing nozzles,
Sliding plates, Submerged nozzles, zirconia hollow ball products, high
quality zirconia furnace furniture, etc.
Material of Fused yttrium
The material of Fused Yttrium is a new production, succeeds through years
efforts in developing a new special method. The production owns the
character of high purity, big crystalline modification, high melting
temperature, good heat-conductivity, high resistance to permeation, etc. It
is used for cast-fused titanium metal area and special ceramic area.
1424
glasstec
glasstec
ZIBO KENHAN REFRACTORY MATERIALS CO., LTD
Address 19, Mintai Road, ZIBO Technology
Industry
Park,Zibo,Shandong,P.R.China
255088 Zibo City
China (Rep.)
Telephone +86 533 3980-298
Fax +86 533 3980-208
Internet Address www.chinakenhan.com
Booth Hall 10 G73-1
PRODUCT OVERVIEW
MyCatalog
MyCatalog
ZIPPE Industrieanlagen GmbH
Address Alfred-Zippe-Str.
97877 Wertheim
Germany
Telephone +49 9342 804-0
Fax +49 9342 804-138
Internet Address www.zippe.de
Booth Hall 13 A25
PRODUCT OVERVIEW
PRODUCT DETAILS
Magnesia Bricks
Zircon-mullite Bricks
PRODUCT DETAILS
Recycling Plants
ZIPPE recycling plants are desdigned to transform hot and cold waste
glass into remeltable cullet material around the clock and without any staff
involvment, so contributing to environmental protection and avoiding the
waste of energy and raw materials.
1425
glasstec
glasstec
MyCatalog
MyCatalog
Used cooling water can be filtered, chemically treated, cooled and so well
recycled.
Einlegemaschine für Elektrowannen
Eigenentwickelte Maschinen wie Kratzerförderer, Brecher,
Einlegemaschinen, Glasstandsregler und vieles mehr werden im Hause
ZIPPE hergestellt. Dies ermöglicht Produktentwicklungen und Testläufe in
Eigenregie.
Zircor Electrofusion S.A.
Address Georges Martin 6
7333 Tertre
Belgium
Telephone +32 65 642294
Fax +32 65 644453
Internet Address www.zircor.com
Booth Hall 13 B03
PRODUCT OVERVIEW
PRODUCT DETAILS
refractory materials
Supplier of refractory materials, electro fused refractory
1426
FAIRGROUND MAP
HALL MAP, Hall: 10
EXHIBITOR
F22
G48
D22
D47
A87
B39
C81
A04-12
D30-1
E30-1
B35
D30-2
F74-7
G26
F74-1
F75-2
G73-1
G16-1
E30-3
E57
F75-3
F75-5
PEMCO International c/o PEMCO Emails S.r.l.
W. Haldenwanger GmbH & Co. KG, Technische Keramik
BSH Fahrzeugkomponenten
Dornbusch Gravuren GmbH
JUTEC Hitzeschutz GmbH
MOCAP Deutschland Ltd.
Changshu Brother Glass Mould Co., Ltd.
Changshu Jianhua Die Sets Co., Ltd.
Changshu Weiheng Mould Manufacture Co., Ltd.
China Starlight Refractory Co., Ltd.
Hamad M. Aldrees & Partners Company for Industry & Mining
Shanghai SGMT Glass Mach-Tech Co., Ltd.
Weifang Sanjiang Glass Machinery Co., Ltd
Xinmi Zhongyuan Special Refractory Material Co., Ltd.
Zhengzhou Ancai Refractory Co., Ltd
Zhengzhou Yuandong Refractory Co., Ltd.
ZIBO KENHAN REFRACTORY MATERIALS CO., LTD
Beijing Ruitai High-temperature Materials & Technology Co., Ltd.
Beijing Trend Hi-Tech Insulating Materials Co., Ltd.
COMIT S.r.l.
Huailai Tianyuan Special Type Glass Co., Ltd.
Zhengzhou Zhenzhong Fused Zirconia Co., Ltd.
HALL MAP, Hall: 16
EXHIBITOR
D78
A39
E38
A57
B73
Giardina Officine Aeromeccaniche
Keraglass Engineering
Optima S.r.l.
APB Antonio Piazza Brevetti S.r.l.
Mistrello Officine S.r.l.
HALL MAP, Hall: 13
EXHIBITOR
B54
C01
C67
F15
F78
C86
B01
A37
D14-7
D14-6
C25-1
C03
C15-1
A17
F17
F21
B63
D49
A92
D53
C31
D51
F22
C37
C53
C82
E57
D51
E81
C35
F29
E65
C06
D80
B79
E86
E19
A87
A63
C84
F01
D35
F24
A25
D07
D65
B03
SIMTECH
Maquinas Argentinas del Vidrio S.A. (Mavsa)
FIB-SERVICES S.A.
G-Lehrs
MAXON GmbH
Dura Temp Corporation
Eclipse, Inc.
Merkle International, Inc.
Mixer Systems
North American Refractories Co.
Quantum Engineered Products, Inc.
Ramsey Products Corp.
Stewart Engineers
Toledo Engineering Co., Inc.
Bohemia Machine, s.r.o.
Cestaro s.n.c.
Emmeti S.p.A.
FORTE S.r.l.
Anglo Carbon
S.I.G.MA. S.r.l. Refrattari Tecnici Industriali
Electroglass Ltd
FIVES STEIN Ltd.
Glassworks Hounsell
Graphoidal Developments Ltd.
I.S. Maintenance Ltd
Inspection Systems
Lattimer Ltd
Penelectro Limited
Pennine Industrial Equipment Ltd
A. & L. Rondot S.A.S.
AIR LIQUIDE S.A.
BERNARD ET BONNEFOND
Carbone Lorraine Composants S.A.S.
Condat Lubrifiants
Zecchetti S.r.l.
FICO Industrie
METRA
RESCAL S.A.
Saint-Gobain SEFPRO
THIMON
TIBTECH innovations
Valoref
De Raedt Industrial Fans
ZIPPE Industrieanlagen GmbH
GPM_Glass Project Management and Used Equipment
Wieland Lufttechnik GmbH & Co.KG
Zircor Electrofusion S.A.
E21
A41
E40
D87
D73
C41
E53
E17
A10
D37
A42
A73
A24
E72
F66
E73
B41
A35
F34
C86
B07
D68
D68
D83
E04
B89
C14
B62
B73
B62
A89
C33
D35
D62
C57
C02
B86
D41
A57
A49
D04
A15
B81
C56
F30
F03
F62-3
B87
E01
B63
B68
AGK Hochleistungswerkstoffe GmbH
Bock Energietechnik
Vision Electric GmbH
Fickert + Winterling, Maschinenbau GmbH
Franke Industrieofen-Service
futronic GmbH
Grob GmbH, Glash ttentechnik - Glasofenbau
RUREX-STAHL Dr. Otto Kukla GmbH
IPROTec GmbH & Co. KG
M.E. SCHUPP Industriekeramik GmbH & Co. KG
Linde AG, Linde Gas Division
Kanthal, ZN der Sandvik GmbH
K rting Hannover AG, Bereich W, Industrie- und Prozessw rme,
Feuerungstechnik
Changshu Jinggong Mould Mfg Co., Ltd.
HyGear BV
Special Ceramics (P) Ltd.
Emhart Glass SA
Hotwork International AG
PLANSEE Metall GmbH
Interglass, S.A. de C.V.
JCL Engineering Pte Ltd
Essemce AB
GLASMA AB
OCL INDIA Limited
FINNTEMP Oy
Zak?ady Magnezytowe Ropczyce S.A.
PKI-Teplotechna Brno spol. s.r.o.
Resim s.r.o.
Sklostroj Turnov CZ s.r.o.
VVV MOST spol. s r.o.
Langendorf GmbH
System RES S.a.r.l.
Alfaref GmbH
Advantech S.p.A.
ELIOG-kelvitherm Industrieofenbau GmbH
F ller Glastechnologie Vertriebs-GmbH
All Glass S.r.l
Lincoln GmbH, Zentralschmiersysteme
LWN Lufttechnik GmbH
P-D Refractories Group, Feuerfestwerke Wetro
EuroGlassMachinery S.r.l.
EUROMATIC S.r.l.
promeos GmbH
Putsch GmbH & Co. KG
Glass Technologies S.r.l.
Henan Chief Way Industry Co. LTD.
Humanglass Machine Engineering Co., Ltd.
NOV S.r.l.
Nanjing Xinshu Machinery Co., Ltd
Sipac S.p.A.
Logicon Engineers Pvt. Ltd.
B62
F72
D14-2
D32
B57
C89
D51
C89
VSS - engineering comp. GmbH
Ying Chang Machinery Co., LTD.
HyRadix, Inc.
Khavar Bolour e Tehran Co.
AGC Ceramics Co., Ltd.
MSC INSPECTION WORLDWIDE
FIVES STEIN
SGCC Inspection Worldwide
HALL MAP, Hall: FG.13
EXHIBITOR
13-01
Langendorf GmbH
HALL MAP, Hall: 11
EXHIBITOR
D07
E03
B85
A67
F40
G20
E79
G38
Sicatec GmbH - Sintered Carbon Technologies
Heavydrive
Lansing Fahrzeugbau GmbH
Van Hu t Glass Logistics
AEG Power Supply Systems GmbH
CONMAC GmbH, Maeda-Minikrane
Kaltun Mining Co.
K. Schulten GmbH & Co. KG
HALL MAP, Hall: 15
EXHIBITOR
C01
A37
G02
B15
F50
G01
H14
G44
A17
H50
C14
A35
D09
B20
D15
D19
H09
B38
D15
B20
D01
B43
A34
A44
B25
C33
B33
C20
B34
C05
A26
Glass Service Inc.
SAXONIA Edelmetalle GmbH
NOL-TEC EUROPE S.r.l.
Johnson Matthey Noble Metals
Studio 1 Automazioni Industriali s.r.l.
Parkinson-Spencer Refractories Ltd
Benteler Maschinenbau GmbH
UAS Messtechnik GmbH
Eirich GmbH & Co KG, Gustav, Maschinenfabrik
TEKA Maschinenbau GmbH
EURO-TECH Vacuum
ExCelsius Global Services GmbH
GEROLD GmbH & Co. KG, Maschinenbau
Glamaco Maschinenbau GmbH
Grafix GmbH
HEGLA GmbH & Co. KG
HEGLA GmbH & Co. KG
HUBTEX Maschinenbau GmbH & Co. KG
IfG GmbH Ingenieurb ro f r Glastechnik
JSJ Jodeit GmbH
AB Fejmert Patent
Nirvana Technologies (P) Ltd.
Lahti Precision Oy
Eurostar Concrete Technology S.p.A.
EME Maschinenfabrik Clasen GmbH
Grenzebach Maschinenbau GmbH
Hager Sondermaschinenbau GmbH
Pannkoke Flachglastechnik GmbH
Grafotec Spray Systems GmbH
STG Software & Technologie Glas GmbH Cottbus
Z&J Technologies GmbH, Zimmermann & Jansen
HALL MAP, Hall: 09
EXHIBITOR
G41
D04
D38
D33
B31
D37
D72
E32
Talamoni s.n.c.
Tiffany Glas Kunst GmbH (TGK)
Siebenlist Glas-Schmelzofen-Technik
VESTA / ZMAK M hendislik Mimarlik San. ve. Tic. Ltd. Sti.
KSO-GOBI Ofenbau GmbH
Nabertherm GmbH
UNGRICHT Roller + Engraving Technology
Merker GmbH, Kurt
HALL MAP, Hall: 17
EXHIBITOR
C70
B07
Norddeutsche Seekabelwerke GmbH
Officina Meccanica Sestese
HALL MAP, Hall: 14
EXHIBITOR
B60
A02
A27
C69
B64
E70
A25
C74
C60
D69
E24
E78
D64
D50
C02
D05
B50
A34
D01
A41
A41
C06
A20
B06
C49
A64
A31
A59
B02
A59
E06
A42
A59
A52
B19
C01
C41
A53
A23
E02
D54
C12
A53
B22
A35
B12
D02
Cimec Oy
Sogelub S.A.
Batisti Meccanica S.r.l.
BDF INDUSTRIES S.p.A.
Bonaiti Pietro s.n.c.
Car-Met S.p.A.
FOND METALLI CONVEYORS S.r.l.
Fonderie Bartalesi S.r.l.
Fonderie Valdelsane S.p.A.
Glass Service S.r.l.
Armatec Vierhaus GmbH
M.T. Forni Industriali S.r.l.
Putsch Meniconi S.p.A.
Strada S.r.l.
Lane & Sons Ltd., George
Sheppee International Ltd.
M tal Industriel de Chauny
Omco International N.V.
Webber Brennertechnik GmbH
WALTEC Maschinen GmbH
VITRUMA GmbH & Co. KG
Viprotron GmbH
Bosch Rexroth AG, Vertrieb Deutschland
Control & Heating Systems
DMA Maschinen- und Anlagenbau GmbH & Co. KG
THK GmbH
EGLASS Machinery & Parts GmbH
Fuchs Lubritech GmbH
Glasinvest Engineering und Anlagenbau GmbH
Glass Technology International GmbH
Gronemeyer Maschinenfabrik GmbH & Co.
Schunk Kohlenstofftechnik GmbH
SCHRADER Glasformenbau GmbH & Co. KG
Hartmann & Bender Vertriebs- und Produktionsgesellschaft mbH
HEYE International GmbH
HORN Glass Industries AG
MSK Verpackungs-Systeme GmbH
IWG Ingenieurb ro Wagenbauer Glasofenbau GmbH
L winger GmbH, Glasbearbeitungsmaschinenbau
LAT Antriebstechnik GmbH & Co. KG
KREISEL GmbH & Co. KG
MOPAVID, S.L.
Forma Glas GmbH
Ori-Mould Technology Co., Ltd.
I-Scan Robotics Ltd.
Metavil, Lda
Vidromecanica
E24
A22
A03
D76
E44
E73
E53
A08
D50
C79
E19
B05
C74
A05
B20
D64
E76
E62
E23
D64
Bystronic Maschinen AG
Kararmaz Kalip San. ve Tic. Ltd. Sti.
Merkad Makina Kalip San. ve Tic. Ltd. Sti.
Antonini S.r.l.
Bottero
GPS Glasproduktions-Service GmbH
Busellato Glass Moulds S.r.l.
C.RE.F.IN. S.r.l.
COMIT S.r.l.
COMMERSALD IMPIANTI S.r.l.
Pennekamp GmbH & Co. OHG, Ernst
Falorni Gianfranco S.r.l.
Fima Olimpia Fonderie S.p.A.
AMBEG Dr. J. Dichter GmbH
Mario Argiro s.r.l.
O.I.M.M., Officine Italian Mould Makers
OCMI-OTG S.p.A.
Olivotto Glass Technologies S.p.A.
OSC S.P.A. Glass Mould Factory
SVEMA s.a.s.
HALL MAP, Hall: 12
EXHIBITOR
E21
E07
C36
E75
B36
B50
C21
D15
B01
B02
B06
D49
E16
D07
D37
E74-5
A43
D75
B46
A21
D06
D41
B51
KRS Recycling Systems GmbH
FOR G, s.r.o.
Italcarrelli S.r.l.
Saati S.p.A.
DSF Refractories & Minerals Ltd
Ferlam Technologies
Bekintex N.V.
SMT Lager- und Transportsysteme GmbH
RHI Glas GmbH
RHI Glas GmbH
Intco GmbH
Movomech Systems GmbH
Logistic System Pichler GmbH
Rath AG
Shandong Sanjin Glass Machinery Co., Ltd.
Shanghai Hengye Chemical Industry Co., Ltd
Beneq
TECHGLASS Sp. z o.o., Przedsiebiorstwo B.P.H.
King's Metal Fiber Technologies Co., Ltd.
Cugher Glass S.r.l.
WITT-Gasetechnik GmbH & Co. KG
Pt. Dyson Zedmark Indonesia
Pneumofore S.p.A.

Www Glasstec Online Com Mycatalog Glasstec

Transcription

Similar documents

Glass instructions

THE BEAUTY OF FLEXIBILITY

Classroom “Chihuly” - Dick Blick Art Materials

PDF - 2.1 MB - Glasbau Hahn

Summer 2016 Exhibitions and programme activities throughout the

The Dish that does it all

52488-7471 euroglass apr news.indd

Inspiring Surface Design

Large Auction - Don Guthery and Associates Auctioneers

ANTIQUES AUCTION - John Kruesel`s General Merchandise