hammer time

Comments

Transcription

hammer time
Hilti Drilling and Demolition Systems
HAMMER TIME
Hilti. Outperform. Outlast.
Hilti services
Superior safety systems
INDUSTRY LEADING
SERVICE OFFERING.
Your daily needs are
our business.
AVR AND DRS
SAFETY SYSTEMS.
For a safer and more
productive workplace.
Hilti Fleet Management.
The clever alternative to buying tools.
Subchasis AVR system.
Vibration absorber
We look after your entire fleet of tools so you can concentrate on your own daily
business. Together with you we analyse your existing fleet of tools and ensure that your
new fleet includes only the tools you really need. With Hilti Fleet Management, a fixed
monthly charge covers all tool, service and repair costs.
That greatly simplifies your financial planning and takes a load of administrative work off
your shoulders. Sounds attractive? Yes, it is – just ask your Hilti representative for more
information.
Upper pivot
Front stop
Lower pivot
Back stop
Internal parts including
hammering mechanism
and motor are
completely isolated
form the outer casing
and hand grips by a
system of springs and
pivots.
Active Vibration Reduction
(AVR).
Up to 2/3 less vibration.
Active Vibration Reduction (AVR) makes power tools
less tiring to use and provides protection against the
effects of long-term exposure to vibration. Fatiguefree working increases daily productivity and results in
longer permissible operation times.
Feel the difference with Hilti AVR.
Hilti Lifetime Service.
Anything but business as usual.
For those who prefer to own their tools, Hilti tools come backed by the industry leading
service package, Hilti Lifetime Service. This means absolutely no repair costs for up to
2 years from the date of purchase, including free pick-up and delivery and even parts
subject to wear and tear! After 2 years, Hilti continues to support its products, with a
capped repair cost limit, as well as free tool repair or replacement on manufacturer’s
faults for the lifetime of the tool. Now that’s an industry first!
up to
2 Years
LIFETIME
SERVICE
NO
COSTS
Lifetime
Lifetime
REPAIR
COST LIMIT
MANUFACTURER’S
Inner ring (2nd ring) at working end.
The purpose of this ring is to prevent
intake of large pieces of concrete /
surface material which could block the
system and cause work interruptions.
WARRANTY
Two chamber air flushing system.
The TE DRS-B not only removes dust
from the working surface, but also from
the front end of the chuck, reducing
dust exposure by up to 95%.
Contact Hilti on 131 292 or visit hilti.com.au
All prices shown are ex GST
All prices shown are ex GST
Dust Removal System (DRS).
Collect up to 95% of hazardous dust.
The addition of a Hilti Dust Removal System (DRS)
offers highly effective dust removal, collecting up
to 95% of hazardous fine dust resulting in a clean
working environment. It also reduces the amount
of dust entering the tool extending its lifetime and
reducing down-time, for even greater productivity.
DRS systems are available for dustless hammer
drilling and chiselling.
Contact Hilti on 131 292 or visit hilti.com.au
Hilti breaker systems
BREAKING THE RULES.
Whether its light chiselling or heavy breaking and demolition work,
Hilti breakers for wall and floor applications offer the ultimate in
reliability – outperforming and outlasting the rest.
TE 700-AVR
TE 800-AVR
AVAILABLE
SEPTEMBER 2015
Application and tool selector.
Brick / Tile / Masonry
TE 500-AVR
$1155
SUPPLIED WITH
2 CHISELS
Technical data
Rated input
Impact energy
Hammering speed
Max. chiselling
performance
Weight
TE 500-AVR
1100 W
7.5 J
3180 impacts/minute
900 cm³/min
5.7 kg
TE 1000-AVR
The ultimate dedicated wall breaker for
concrete and masonry.
$1559
SUPPLIED WITH
2 CHISELS
Technical data
Rated input
Impact energy
Hammering speed
Max. chiselling
performance
Weight
TE 700-AVR
1300 W
11.5 J
2760 impacts/minute
1200 cm³/min
7.9 kg
TE 1500-AVR
Rated input
Impact energy
Hammering speed
Max. chiselling
performance
Weight
TE 1000-AVR
TE 700-AVR
$1619
SUPPLIED WITH
2 CHISELS
Technical data
Rated input
Impact energy
Hammering speed
Max. chiselling
performance
Weight
TE 800-AVR
1850 W
21 J
1890 impacts/minute
TE 800-AVR
100mm concrete slab
2500 cm³/min
150mm concrete slab
300mm concrete slab
10.6 kg
MEET THE MAINTENANCE-FREE, BRUSHLESS HILTI SR MOTOR.
TE 3000-AVR
The Switched Reluctance (SR) motor has no carbon brushes,
rotor windings or commutator. Where competitor tools need
to change carbon brushes frequently, the unique SR motor
found in Hilti TE 700-AVR, TE 1000-AVR, TE 1500-AVR and
TE 3000-AVR breakers, is maintenance-free for life.
Heavy-duty floor breaking or walls below
hip level.
Technical data
TE 1500-AVR
The perfect all-rounder for wall and floor
applications.
2ND GENERATION
AVAILABLE MAY 2015
SUPPLIED WITH
2 CHISELS
TE 500-AVR
Concrete
Accurate chiselling and chasing for cable
conduits or pipe penetrations in brick or
block.
TE 3000-AVR
$1789
TE 1000-AVR
1750 W
26 J
1950 impacts/minute
7800 cm³/min
12.5 kg
Ultimate dedicated floor breaker for high
productivity and performance.
SUPPLIED WITH
2 CHISELS
Technical data
Rated input
Impact energy
Hammering speed
Max. chiselling
performance
Weight
Contact Hilti on 131 292 or visit hilti.com.au
$1955
TE 1500-AVR
1800 W
30 J
1620 impacts/minute
8830 cm³/min
14.2 kg
The king of heavy-duty concrete breaking,
outperforming air tools.
SUPPLIED WITH
TROLLEY AND
4 CHISELS
Technical data
Rated input
Impact energy
Hammering speed
Max. chiselling
performance
Weight
$3589
Less repair costs – longer tool life
No need to replace brushes, therefore principally
maintenance-free over life and much more robust than
conventional motors.
TE 3000-AVR
2070 W
68 J
860 impacts/minute
40000 cm³/min
29.9 kg
All prices shown are ex GST
All prices shown are ex GST
Longer service cycles – less
work interruption due to repair
Constant high performance, even
when supply voltage drops
Unlike conventional motors the SR motor has
neither commutator, nor carbon brushes, nor rotor
windings.
Furthermore it is much less sensitive to voltage
fluctuations, for example when used with long
extension leads or a generator.
Contact Hilti on 131 292 or visit hilti.com.au
Hilti combihammers
THE HEAVYWEIGHTS.
Anyone with a Hilti combihammer in their hands is ready for
virtually any kind of job. Whether drilling wide-diameter holes
in reinforced concrete or doing a tough chiselling job, Hilti
combihammers deliver the ultimate in productivity, performance
and reliability.
TE 30-­A36
TE 30-C-AVR
TE 30 M-AVR
Application and tool selector.
Hilti tool
Ratio
drilling/
chiselling
Anchor holes / through holes
5
6
8
10
12
14
16
18
20
22
25/26
28
30
32
35
38
40
TE 30-­A36
TE 30-C-AVR
The world’s first cordless combihammer.
INCLUDES BATTERY
+ CHARGER
Technical data
Voltage
Battery capacity
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
The versatile, lightweight all-rounder with
the benefit of Active Vibration Reduction.
$1799
TE 30-A36
36 V
6 Ah
3.6 J
4500 impacts/minute
11 m/s²
$1039
Technical data
Rated input
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
TE 30-C-AVR
850 W
3.3 J
4080 impacts/minute
12 m/s²
4.2 kg
The combihammer for all-round use
with second gear for drilling into timber
and steel or mixing
grouts.
$1275
Technical data
Rated input
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
TE 30 M-AVR
900 W
3.3 J
4080 impacts/minute
TE 30 M-AVR
TE 50-AVR
TE 60 /
TE 60-ATC-AVR
TE 70-AVR /
TE 70 ATC-AVR
= approx. 50% drilling / 50% chiselling
= approx. 75% drilling / 25% chiselling
= optimal
= occasional
12 m/s²
4.4 kg
5.5 kg
TE 60 /
TE 60-ATC-AVR
TE 50-AVR
TE 70-AVR /
TE 70-ATC-AVR
ACTIVE TORQUE CONTROL (ATC).
Slip clutch
The most compact SDS max
combihammer available.
*Optional Dust Removal System (DRS) available.
SUPPLIED WITH
16MM DRILL BIT
Technical data
Rated input
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
$1329
TE 50-AVR
1050 W
5.2 J
3180 impacts/minute
11.4 m/s²
5.8 kg
The powerful and reliable workhorse plus
the safety advantage of its big brother.
*Optional Dust Removal System (DRS) available.
Unbeatable productivity and reliability as
well as added safety with the ATC function.
*Optional Dust Removal System (DRS) available.
TE 60
TE 60-ATC-AVR
TE 70-AVR
$1445
$1735
$1735
Technical data
Rated input
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
Contact Hilti on 131 292 or visit hilti.com.au
TE 60 / TE 60-ATC-AVR
1300 W
7.3 J
3300 impacts/minute
18.5 m/s²
7.5 m/s²
6.4 kg
7.5 kg
Technical data
Rated input
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
TE 70-ATC-AVR
$2079
TE 70-AVR / TE 70-ATC-AVR
1800 W
11.5 J
2760 impacts/minute
10 m/s²
8.3 kg
9.5 kg
All prices shown are ex GST
Often copied but never equalled,
Active Torque Control (ATC) is a unique
Hilti technology available for added safety
in combihammers. In the event of a drill
bit jamming on rebar, the ATC system
protects the user thanks to a rapid motor
cut out feature.
Cut illustration TE 60-ATC AVR
All prices shown are ex GST
The slip clutch is engaged when the
torque on the drill bit exceeds
80 Nm.The slip clutch is a mechanic
system which decouples the drill bit
and motor in a few seconds and does
not stop the motor. Safety clutch is a basic safety
element required by law on combis.
Active Torque Control (ATC)
ATC is activated when the tool’s housing rotates too
quickly. ATC is a magnetic clutch which decouples the
drill bit and motor instantly and stops the motor in a
fraction of a second. ATC is a unique Hilti feature which
protects the user from serious injury by preventing the
tool from rotating out of control in the event of a drill bit
jamming when it hits rebar.
Contact Hilti on 131 292 or visit hilti.com.au
Hilti rotary hammers
SIMPLY BUILT BETTER.
For uncompromised performance, reliability and mobility, choose
from our selection of cordless rotary hammers. For the infrequent
user, there is a corded model to suit every need.
TE 2-A22
TE 4-A22
TE 6-A36-AVR
Application and tool selector.
Hilti tool
Ratio
drilling/
chiselling
Anchor holes / through holes
5
6
8
10
12
14
16
18
20
22
25/26
28
30
32
35
38
40
Light and compact, ideal for overhead
applications.
INCLUDES 2 BATTERIES
AND CHARGER
Technical data
Voltage
Battery capacity
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
$679
TE 2-A22
22 V
1.6 Ah or 3.3 Ah
1.5 J
5040 impacts/minute
15 m/s²
2.7 kg
TE 1
Best all-round cordless rotary hammer
with 22 volt power.
INCLUDES 2 BATTERIES
AND CHARGER
Technical data
Voltage
Battery capacity
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
$899
TE 4-A22
22 V
3.3 Ah
2.0 J
5200 impacts/minute
11 m/s²
3.3 kg
TE 2-S
INCLUDES 2 BATTERIES
AND CHARGER
Technical data
Voltage
Battery capacity
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
$1499
TE 6-A36-AVR
36 V
3.0 Ah
2.0 J
5283 impacts/minute
TE 4-A22
TE 6-A36-AVR
The 36 volt workhorse. Optional Dust
Removal System (DRS) for a clean and safe
work environment.
TE 1
CORDED
CORDLESS
CORDLESS
TE 2-A22
TE 2-S
TE 7
TE 7-C
= approx. 87% drilling / 13% chiselling
= optimal
= occasional
9 m/s²
4.0 kg
TE 7
HILTI CORDLESS POWER CARE.
Lithium CPC battery technology you can rely on.
TE 7-C
CORDED
Hilti has a range of cordless tools tailored to meet your exact needs in voltages
perfectly matched to power requirements. They also feature one of the most
advanced Lithium-Ion battery technologies on the market today.
Hilti Lithium CPC batteries, chargers and tools are designed down to the last
detail, for superior power and performance, with unmatched durability.
Individual cell protection
Light-duty hammer drilling. The starter for
every tool kit.
Ideal for overhead drilling and into tiles with
sensitive hammer mode.
$195
Technical data
Rated input
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
TE 1
650 W
1.5 J
4500 impacts/minute
15 m/s²
2.4 kg
Medium-duty rotary hammer with optional
Dust Removal System (DRS).
$399
Technical data
Rated input
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
Contact Hilti on 131 292 or visit hilti.com.au
TE 2-S
650 W
1.8 J
4600 impacts/minute
13.5 m/s²
2.7 kg
$649
Technical data
Rated input
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
TE 7
710 W
1.8 J
4980 impacts/minute
11 m/s²
2.9 kg
All prices shown are ex GST
The Hilti Lithium CPC
system monitors each
cell electronically,
which is critical for
long battery lifetime.
Medium-duty rotary hammer with chiselling
function and optional Dust Removal
System (DRS).
$799
Technical data
Rated input
Impact energy
Hammering speed
Triaxial vibration for
drilling
Weight
TE 7-C
720 W
2.6 J
4020 impacts/minute
17 m/s²
3.4 kg
All prices shown are ex GST
Long lasting cells
Hilti Lithium CPC
batteries feature a LED
charge status display
that tells you how much
“fuel” is left in the “tank”.
Reliable power
Robust packs
Battery cells
incorporating the
most advanced
technology guarantee
a higher number of
charging cycles and longer total battery
lifetime.
Specially designed to
withstand hard jobsite
use, Hilti Lithium CPC
batteries and cordless
tools feature tough
fibreglass reinforced casings with protective
rubber areas for extra ruggedness.
Contact Hilti on 131 292 or visit hilti.com.au
Total performance
MORE THAN THE SUM
OF ITS PARTS.
Hilti power tools and accessories are developed
side-by-side and are perfectly matched.
This provides users with the best possible service life
and productivity.
Count on Hilti.
Percussion core bits
Polygon chisels
Hammer drill bits
Hollow drill bits
Dry coring Ø 45–125 mm and socket cutting into
non-reinforced concrete and masonry provided by:
Demolition, corrective chiselling, openings,
smoothing concrete surfaces after pouring concrete
and many other applications with the Polygon chisel
portfolio:
Drilling holes Ø 4– 40 mm for chemical anchors,
post-installed rebar connections, medium and
heavy-duty anchors and through holes:
• Self sharpening effect.
•L
ess chance of drill bit jamming when hitting rebar
due to the superior 4 cutter head.
Drilling holes Ø 16 – 35 mm/up to 1 metre working
length for chemical anchors and post-installed
rebar connections. TE-CD and TE-YD hollow drill
bits make subsequent hole cleaning completely
unnecessary thanks to the automatic cleaning
solution:
•N
ew design enabling up to 30 % more lifetime to
competition.
• Ideal corbide position for easy core disposal.
• Dust free drilling with DRS system.
• Reduced sticking and better breaking effect.
• Rubber cup protects tool chuck from dust.
• Solid carbide and 4 cutting edges.
•G
uaranteed quality: replacement Hilti bit provided
in the event of failure as long as wear mark is
visible and after Hilti inspection.
• Full carbide head embedded into the tube.
• Hollow tube for dust transportation.
• Red adapter for connection to the vacuum cleaner.
Bell-shaped breach bits
Effective through-hole drilling Ø 32– 80 mm into
non-reinforced concrete and masonry:
• Carbide-tipped ring cutting head with centring pin.
• Helix over the full working length.
• Two part design for easy servicing.
Contact Hilti on 131 292 or visit hilti.com.au
All prices shown are ex GST
All prices shown are ex GST
Contact Hilti on 131 292 or visit hilti.com.au
Contacting Hilti
HOW TO GET
IN TOUCH.
There are a number of ways
to contact Hilti.
Customer Service
Customer Service representatives are available Monday to Friday from 7:30am to
5:00pm. Our professionally trained team can help you with product advice, orders
and deliveries, as well as organising on-site product demonstrations.
Call: 131 292
Fax: 1300 135 042
Email: [email protected]
Hilti Centres
With stores located nationally, Hilti Centres are much more than display or sales
points for Hilti products. At a Hilti Centre, you can receive professional advice on
products and applications. You can also have hands-on demonstrations of Hilti
products. Take a look at our list of Hilti Centres for a location near you.
Visit: www.hilti.com.au
Hilti Online
7 days a week, 24 hours a day. Use the website at your own convenience during
and after office hours, with quick access to product information and pricing.
Register to order online, review your order history, see your tool list and more.
Take advantage of our free delivery for online ordering today!
Visit: www.hilti.com.au
Account Managers
Professionally trained Account Managers are readily available nationwide, to visit
your place of work, where and when you want. By arranging a visit to you, they
can help evaluate your job requirements and suggest ways to increase your
productivity and profitability.
Call: 131 292
Sydney – Lidcombe
35 Parramatta Road,
Lidcombe NSW 2141
Mon – Fri 7.00am – 5.00pm
Melbourne
203-205 Normanby Road,
South Melbourne VIC 3205
Mon – Fri 7.00am – 5.00pm
Townsville
Unit 8/264 Woolcock Street,
Currajong QLD 4812
Mon – Fri 7.30am – 4.30pm
Perth
150 Abernethy Road
Belmont WA 6104
Mon – Fri 7.00am – 5.00pm
Sydney – Annandale
245a Parramatta Road,
Annandale NSW 2038
Mon – Fri 7.00am – 4.00pm
Brisbane
718 Kingsford Smith Drive,
Hamilton QLD 4007
Mon – Fri 7.00am – 5.00pm
Cairns
29 Hannam Street,
Cairns QLD 4870
Mon – Fri 7.30am – 4.30pm
Hobart
56A Hopkins Street,
Moonah TAS 7009
Mon – Fri 7.30am – 4.30pm
Newcastle
70-72 Orlando Road,
Lambton NSW 2299
Mon – Fri 7.00am – 4.00pm
Gold Coast
Unit 4/45 Nind Street,
Southport QLD 4215
Mon – Fri 7.00am – 4.00pm
Adelaide
52 Richmond Road,
Keswick SA 5035
Mon – Fri 7.00am – 5.00pm
Darwin
32 Benison Road,
Winnellie NT 0820
Mon – Fri 7.30am – 4.30pm
Hilti. Outperform. Outlast.
Hilti (Aust.) Pty Ltd I Level 5, 1G Homebush Bay Drive I Rhodes I NSW 2138 I T 131 292 I F 1300 135 042 I www.hilti.com.au
Item No 3526245

Similar documents