HDMI Products - West Penn Wire

Professional Video Solutions:
Digital Video
HDMI
HDBaseT
High Definition Multimedia Interface
Digital A/V
2013
Digital Video World:
The A/V industry is going through a transition form analog signaling to digital signaling. A wide
array of digital video ports, including DVI, HDMI, DisplayPort, and HD-SDI, are present in some
form on virtually every new component found in the A/V industry. Although digital signaling is
becoming predominant in the A/V industry, there is a wide range of analog hardware equipment
in place today. For the foreseeable future most presentation A/V systems will require a mix of
analog and digital video products.
Digital video has been in existence for over 20years. HD-SDI or SDI has been in the medical,
visualization, and computer graphics segments for over 10years, DVI was established in 1999.
The newer standards are HDMI and DisplayPort which both can carry digital video and audio.
The signals:
DVI and DisplayPort are found on many PC’s and laptops and are standard on many professional
displays and high-end projectors.
HDMI is primarily found on HDTV capable products - BlueRay Disc players, game consoles, and
satellite/cable DVR and receivers. HDMI was introduced as a consumer product, but has worked
its way into the commercial product mix.
Why Digital?
• Lower cost computers and displays - Less A/D conversion in equipments
• Digital signals are lossless, enabling the distribution of near pixel-perfect and consistent quality
images while reducing the time and effort required for system and display set-up
• A digital infrastructure can be designed to accommodate the high resolutions found in the A/V
world today. -1920x1200 and HDTV 1080p.
Challenges:
Compared to analog signals, which is robust and can perform under distress form extended cabling
distances, inadequate system design and installation, digital signals have to maintain full
signal integrity through the system. If these signals are compromised by distances, or design the
impact is more noticeable.
Digital technologies such as DVI, HDMI, and DisplayPort are primarily designed for short point-topoint
connections. Distances in these applications are relatively short. But with extenders and
Network cabling distances of up to 300ft can be achieved.
Digital video signaling have very speci"c performance and timing parameters that need to be
maintained for overall system functionality. Terms such as equalization, jitter, and reclocking replace
terms of the analog world such as-leveling and peaking devices.
In some digital video systems there is two way communication between source and display. If
this communication is interrupted, such as following a disconnection, source switch, or signal
split, image display can be delayed, or even lost completely. This communication is called EDIDExtended
Display Identi"cation Data or DRM Digital Rights Management (associated with HDCP)
High Bandwidth Digital Content Protection.
EDID
Extended Display Identi"cation Data (EDID):
EDID is a standardized meaning for a display to communicate its capabilities to a source.
The premise is for the display to communicate back to the source its operational characteristics,
such as native resolution. The source then would generate the appropriate characteristics back
to the display. This allows function between the two pieces of equipment without installer/user
confguration.
HDCP - Content Protection
Digital Rights Management - Audio and Video Signals
For digital video content protection HDCP in the most prevalent. HDCP is designed to prevent
unauthorized access of protected video content and to enforce restrictions on authorized playback.
HDCP enables video sources, such a Blu-ray disc players, PC’s, and other digital media devices
always undergo a process to protect the video from unauthorized access.
This process of HDCP authentication can serveral seconds or minutes to complete. This is a primary
reason for the preceived sluggishness during startup or switching.
Digital Video Standard Practices
HD-SDI - Serial Digital Interface (High De"nition)
HDMI - High De"nition MultiMedia Interface
DVI - Digital Visual Interface
DisplayPort
B
Digital Video: HDMI
HDMI - High Definition Multimedia Interface
HDMI is an uncompressed all digital AV interface. The digital AV signals are delivered over a single cable and connected with a small designed connector. The interface is between any AV
source, such as a set-top box, DVD, and AV receiver. HDMI is the de facto standard in HD video
(Consumer market).
HDMI provides great AV quality over analog signals especially at higher resolutions. The interface
provides a easy use, two way communication between source and display, and it is HD content
ready- HDCP.
1.3 vs. 1.4 HDMI standards
HDMI 1.3 standards (a, b)
• Increases single link bandwidth to 10.2Gpbs
• Supports 10bit, 12bit and 16bit deep color
• Offers Mini HDMI connectors for portable applications
HDMI 1.4 standards
• Offers all that 1.3 offers
• Supports 3D Viewing
• Increases Sync pulses to help deliver a cleaner signal
• Adds Audio channel return - TV with Built in Tuner - upstream/downstream audio
Cat 1 vs. Cat 2 HDMI cables:
• Cat 1: is the standard cable - will provide quality video for 720p/1080i - 2.23Gbps
• .7425Gbps x 3 RGB Channels= 2.23Gbps Resolution
• Cat 2: High speed- Quality video 1080p Deep Color - 10.2Gbps
• 340Gbps x 3 RGB Channels= 10.2Gbps Resolution - 1440p/16bit color
The bits: When you see 1080p 12bit color what is that really telling you?
• 1080p operating @ 8 bit color- give a possible 16.7million colors
• 1080p operating @ 12 bit color - give a possible 68.7 billion colors - HIGHER BANDWIDTH!
Future Deep Color - 24bit, 30bit, 36bit and 48bit
To prevent future system failures a premium grade HDMI cable has to be used! A 22AWG or
24AWG with low capacitance and low skew will handle these higher data rates for longer distances. HDMI standards do not recommend distances of more than 10meters (33feet), but with
good solid cables, these distances can be increased significantly.
B
Video Resolutions and Bandwidth
Name
Format
Type
XGA
PC
Resolution
Refresh Color
Rate Depth
1024x768 60Hz
8bit
HDMI v1.3 CATEGORY 1 Cables
Single
Channel
bit rate
Gbps
Aggregate
Channel
bit rate
Gbps
.6500
1.950
.7425
2.2275
720p
HDTV
1280x720 60Hz
8bit
.7425
2.2275
1080i
HDTV 1920x1080 30Hz
8bit
.7425
2.2275
1280x1024 60Hz
8bit
1.080
3.24
HDTV 1920x1080 60Hz
8bit
1.485
4.455
8bit
1.620
4.860
1.650
4.950
1080p 12bit HDTV 1920x1080 60Hz 12bit
2.2275
6..6825
HDMI v1.3 CATEGORY 2 Cables
3.40
10.2
S-XGA
1080p 8bit
PC
UXGA
PC
DVI limit
PC
1600x1200 60Hz
Comments
Same as 720p/ 1080i
Highest HDMI bit rate
available today
Upper speed productslimited products
What about Audio over HDMI?
HDMI - High Definition Multimedia Interface
Supported Audio Formats:
High Resolution Audio:
Compressed Audio
• Dolby TrueHD
• Dolby Digital
• DTS-HD Master Audio
• DTS Digital Surround
• DVD-Audio
• Super Audio CD
Uncompressed Audio
• 8 Chn. 192KHz- 24bit
• CD quality - base level
• 2-Chn. 16bit @ 32,44.1, or 48KHZ
B
E Key Features: CN-SHRHDMI-xxm
Replace xx with: 1,2,3,5,10,15,20,25,30,40,50,60 meters
• Supports HDMI “Deep Color” HDTV resolutions up to 1080p
(12-bit)
• Supports HDMI Category 2 data rates (3.4 Gbit/sec.) lengths
up to 7.5 meters
• Supports HDMI data rates up to 2.25 Gbit/sec. lengths up to
40 meters
• Supports PC data rates up to 1.65 Gbit/sec. lengths up to
60 meters
• Supports PC resolutions up to 1600x1200 / 60 Hz and
1920x1200 / 60 Hz
• Heavy-duty 22AWG copper wires for minimum insertion loss
Ultra-low Skew guarantees unsurpassed digital fidelity
• Triple shielded for superior noise immunity
• Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276)
Permanent Installations: Long Runs
With more and more commercial boardroom/ classrooms wanting high bandwidth video, the limits on installing HDMI cables are high. Our SHR cables have connectors which makes it difficult to pull, there is not
an easy field installable HDMI connector, there is a possibility that low grade HDMI cables may be used in
a permanent installation. The solution is to wire the installation with a minimum of CAT6 Shielded and
upgrade to CAT6A Shielded when possible. By providing this type of cabling, the installer can chose HDMI
Extenders (TX/RX). The installation would convert the HDMI signals to run longer distances over the Network cabling, then convert it back to HDMI.
These installation can be cable managed with a simple Category 5E cable, but because of bandwidth limitations of Category 5E, future upgrades to the resolution will not be supported on these cables.
CAT 6A F/UTP:
• 10Gbps - Rated
• Support 1080p 12bit color - 6.68Gbps
• Connectors (Jacks and Plugs Supported by WPW)
• Cable Assemblies Supported
• Patch Panels Supported
Cables: HDBaseT Certified
Cat6 F/UTP
• 4246F - CMR Black
• 254246F - CMP Black
Cat6A F/UTP
• 4246AF - CMR Black
• 254246AF - CMP Black
B
Digital Video - HDBaseT
HDBaseT
HDBaseT technology is a consumer electronic (CE) connectivity technology optimized for wholehome
and commercial multimedia distribution. HDBaseT can connect all the entertainment devices
in a setting through its 5Play™ feature set, converging uncompressed full HD digital video,
audio, 100BaseT Ethernet, power over cable and various control signals through a single
100m/328ft CAT5e/6 cable with RJ45 connectors.
The compelling features of HDBaseT technology include:
• Uncompressed video/audio up to 10.2 Gbps.
• Maximum cable length of 100m, including support of multiple hops, up to 8 x 100m
• Low cost standard Cat5e/6 LAN cable
• Utilizes a standard RJ-45 connector
• Supplies up to 100W of power – which can be utilized to power a remote TV - POH
• Support for 100Mbps Ethernet
• Easy installation utilizing existing in-wall Ethernet connectivity
• USB support
• Supports HDCP
• Networking support including extended-range daisy chain and star topologies
Cables:
• Category 5E 4245 (CMR), 254245 (CMP) UTP
4245F (CMR), 254245F(CMP) F/UTP - Shielded
• Category 6
4246 (CMR), 254246 (CMP) UTP
4246F (CMR), 254246F(CMP) F/UTP - Shielded
• Category 6A 4246AF (CMR), 254246AF (CMP) F/UTP
B
Digital Video - Matrices
Digital Xtreme Matrix - Card Cages
The DigitalXtreme Matrix switches are a complete integrated digital and analog video routing
solution. The front features input/output selection buttons and LCD backlit display.
The back of the units offer 8,16 or 32 card slots with ez insets that are hot-swappable.
Other features on the back are easy access to fan, RS-232, IR, and LAN ports and redudant power.
Matrix Cages
Catalog No.
Description
DXM-88
DXM-1616
DXM-3232
8x8 Digital media card cage matrix system
16x16 Digital media card cage matrix system
32x32 Digital media card cage matrix system
• Redundant Power Supplies are available - Call Engineering
• Easy access to the front and/or rear of cage
• Easy use, set-up and card input/output exchange - (Hot Swap)
DigitalXtreme Input Cards
Input Cards
Catalog No.
Description
DXCI-4-HDMI-G2
4 Input HDMI Digital Video/Audio Input Card
DXCI-4-HDBT1-G2
4 Input HDBaseT Lite Card - Up to 230ft (70m) Input Card
DXCI-4-HDBT2-G2
4 Input HDBaseT Card - Up to 600ft - Cat6A F/UTP HDBaseT Cert
DXCI-4-2V2H-G2
4 Input - 2 VGA + 2 HDMI Input Card with Audio breakout tails
DXCI-4-VGA-G2
4 Input VGA Video with Audio breakout tails Input Card
• HD-SDI Versions are available - Please Contact WPW Engineering for Part Numbers
DigitalXtreme Output Cards
Output Cards
Catalog No.
Description
DXCO-4-HDMI-G2
DXCO-4-HDBT1-G2
DXCO-4-HDBT2-G2
4 Output HDMI Digital Video/Audio De-embed
4 Output HDBaseT Lite Card - Up to 230ft (70m) Card
4 Output HDBaseT Card - Up to 600ft - Cat6A F/UTP HDBaseT Cert
HDMI - Matrix Switches
HDMI Matrix Switch
Catalog No.
Description
ASP-44
ASP-88
4x4 HDMI 3D Matrix - HDCP compliant, RS-232 and IR Control
4x4 HDMI 3D Matrix - HDCP compliant, RS-232 and IR Control- 7.1Ch. Digital Audio
B
Digital Video - HDBaseT Extenders
HDMI - HDBaseT Extenders
Catalog No.
Description
DXE-CAT-S1
DXE-CAT-S2
DXE-CAT-S2L
HDBaseT Lite Extender up to 230ft Range
HDBaseT with 2 LAN Ports up to 600ft Range
HDBaseT with 2 LAN Ports + 8Mb of Storage up to 600ft Range
DXE-CAT-S1
DXE-CAT-S2 and DXE-CAT-S2L
• Transmit HDMI up to 1080p 60Hz 48bit 230ft over one CAT
5e/6/7 cable
• Supports 4K x 2K & HDMI 3D
• HDCP Compliant
• All connectors on one side for easier installation
• Bi-directional RS-232 & IR
• Power both units from TX or RX side with wall power supply
(HDBaseT POH)
• Status LED for all connections on front
• Various mounting options
• Comes in a variety of models for different features & cost
savings
• Use HDBaseT Certified Cables
• Transmit HDMI up to 1080p 60Hz 48bit 330ft over one CAT
5e/6/6A cable 4245 or 254245
• Transmit HDMI up to 1080p 60Hz 24bit 500ft over one CAT 6
cable 4246F or 254246F
• Transmit HDMI up to 1080p 60Hz 24bit 600ft over one CAT 6A
Shielded cable 4246AF or 254246AF
• Supports 4K x 2K & HDMI 3D
• HDCP Compliant
• All connectors on one side for easier installation
• Bi-directional RS-232 & IR & LAN
• Power both units from TX or RX side with wall power supply
(HDBaseT PoH)
• LAN PoE (Flex Power) can power both TX & RX without wall supplies
(Patents Pending)
• Status LED for all connections on front
• Various mounting options
• Comes in a variety of models for different features & cost savings
• Use HDBaseT Certified Cables
• DXE-CAT-S2L - has 8Mb of storage capability for hosting a web
control page
DXE-CAT-TX
DXE-CAT-RX
Transmitter Unit
Receiver Unit
DXE-CAT-S2
and
DXE-CAT-S2L
DXE-CAT Series
• Dimensions: 4.7” x 3.03” x1.1”
• Weight: .87lbs
• Mounting: Wall mounting tabs included
Rack mounting brackets included
DXE-CAT-TX2
DXE-CAT-RX2
Transmitter Unit
Receiver Unit
B
Rack Unit
Rack Unit for DXE-CAT Series Extenders
Catalog No.
Description
DXE-CAT-RK3
3RU 19”W - Fits 16 DXE-CAT Series Extenders
DXE-CAT-RK3- 3RU unit to hold up to 16 Extenders. The
DXE-CAT Series Extenders have all connection on the
back to allow for a clean, organized rack installation
Cable Assemblies
DXE-CAT Series (IR and Control Assemblies)
DXE-CAT Series Cable Assemblies
Catalog No.
Description
CA0012-1
CA0026-1
CA0049-1
CA0052-F2T3R
CA0052-F3T2R
CA0052-M2T3R
CA0052-M3T2R
Single IR Emitter
Single IR Receiver
IR Blaster
3.5mm TRS to Female DB9 2-TX-3
3.5mm TRS to Female DB9 3-TX-2
3.5mm TRS to Male DB9 2-TX-3
3.5mm TRS to Male DB9 3-TX-2
Cable Assemblies
DXW-Series Assemblies
Wallplate Assemblies
Catalog No.
Description
CN-HDVGAAP-XX
VGA+Audio Assembly (xx- 3, 6 or 12)
CNHD825YERCA-XX
RCA TO RCA YELLOW -Composite Video
Stereo Mini Assembly (XX- 6,12,25)
Stereo Mini to 2 RCA Audio (XX- 6,15,25)
CN-E3.5MM-XX
CN-SMTRCA-XX
Cable Assemblies
HDMI to HDMI
ECONOMY HDMI 1.4 ASSEMBLIES
Catalog No.
Length
CN-40HDMI-3
CN-40HDMI-6
CN-40HDMI-10
CN-40HDMI-15
CN-40HDMI-25
CN-40HDMI-50
3 Foot
6 Foot
10 Foot
15 Foot
25 Foot
50 Foot
Jacket Colors
SUPER HI-REZ HDMI ASSEMBLIES
Economy
HDMI
PLENUM HDMI ASSEMBLIES
Catalog No.
Length
Key Features
CN-CPHMHM-15
CN-CPHMHM-25
CN-CPHMHM-35
CN-CPHMHM-50
15 Foot
25 Foot
35 Foot
50 Foot
Plenum Rated
26AWG - (15’-25’)
24AWG (35’-50’)
UL Listed CL2P
Catalog No.
Length
Jacket Colors
CN-SHRHDMI-1m
CN-SHRHDMI-2m
CN-SHRHDMI-3m
CN-SHRHDMI-5m
CN-SHRHDMI-10m
CN-SHRHDMI-15m
CN-SHRHDMI-20m
CN-SHRHDMI-25m
CN-SHRHDMI-30m
CN-SHRHDMI-40m
1 meter
2 meter
3 meter
5 meter
10 meter
15 meter
20 meter
25 meter
30 meter
40 meter
HDMI “Deep Color” 1080p 12bit
Support HDMI Cat2 -7.5m
Heavy duty 22AWG
UL Listed CL2
B
HDMI Products
HDBaseT Extenders - Wall Plate
HDMI - HDBaseT Wall Plate Extender Transmitters
Catalog No.
Description
DXW-2
DXW-2E
DXW-2EU
HDMI + VGA (Component+S-Video+ Composite) + Audio 2 Gang Decora
HDMI + VGA (Component+S-Video+ Composite) + Audio + LAN - 2 Gang Decora
HDMI + VGA (Component+S-Video+ Composite) + Audio + LAN + 2 USB - 2 Gang Decora
DXW-2
HDMI +VGA with Audio
• 2 Gang AV Wall plate- Decora Style
• VGA (Component Video) Distribution with Audio
• HDMI Digital AV - DVI with Audio
• HDBaseT UTP Signal Distribution 330ft.-600ft.
• Bi-directional RS-232 and IR
DXW-2E
HDMI +VGA with Audio +
LAN
• 2 Gang AV Wall plate- Decora Style
• VGA (Component Video) Distribution with Audio
• HDMI Digital AV - DVI with Audio
• 10/100 BaseT Ethernet - DATA
• HDBaseT UTP Signal Distribution 330ft.-600ft.
• Bi-directional RS-232 and IR
DXW-2EU
HDMI +VGA with Audio +
LAN + USB 2.0 (480Mb/s)
• 2 Gang AV Wall plate - Decora Style
• VGA (Component Video) Distribution with Audio
• HDMI Digital AV - DVI with Audio
• 10/100 BaseT Ethernet - DATA
• 2 -USB Connection - Independently 280ft.
• HDBaseT UTP Signal Distribution 330ft.-600ft
• Bi-directional RS-232 and IR
DXW-CAT Series
• Dimensions: 2 Gang Decora® 3.397” x 1.066” Depth - RJ45 Back Plate Entrance( Right Angle)
• Mounting: Fits in standard 2 Gang Decora® style wall plate
• Buttons: Backlit buttons - Select Green, Blue or Red
• IR Remote Window: Plate can receive IR remote at 38kHz up to 40ft. away
NOTE: DXW Series comes with a paintable plastic decora plate.
Wallplate Break-Away Assemblies
Catalog No.
Description
CN-HDRGBY-1
VGA to Yb,Pb,Y and Composite Video Breakaway
Classroom HDBaseT Receiving Devices
HDBaseT Extenders - Receivers
B
HDMI - HDBaseT Receivers
Catalog No.
Description
DXE-CAT-RX1
DXE-CAT-RX2
DXE-CAT-RX3
DXE-CAT-RX3L
DXE-CAT-RX3-A
DXE-CAT-RX3L-A
HDBaseT Lite Receiver up to 230ft Range - ONLY DXW-2
HDBaseT Receiver Up to 600ft - DXW-2, 2E, and 2EU
HDBaseT Receiver Up to 600ft - DXW-2, 2E, and 2EU - Line IN/OUT 2 relays
HDBaseT Receiver Up to 600ft - DXW-2, 2E, and 2EU - with Web Control
HDBaseT Receiver Up to 600ft - DXW-2, 2E, and 2EU - with Audio de-embed Amplified
HDBaseT Receiver Up to 600ft - DXW-2, 2E, and 2EU - with Audio de-embed Amplified + Web Control
DXE-CAT-RX3 Series
• Dimensions: 8.46 x 3.82” x1.3”
• Weight: 2 lbs
• Mounting: Wall mounting tabs included
Rack mounting brackets included
Wall Button Control Panel
Used with the DXW Series Wall Plates
Classroom Wall Control Panel
Catalog No.
Description
DXB-8
8 Button Wall Control Panel - RS-232 - Backlit
DXB-8 Wall Button Control Panel is used to control via RS-232 the video content from the DXW-Series wall
plates. The DXB-8 is designed to work with just about any RS-232 device on the market. The buttons can
be individually be lit red, green, or blue so in dimly lit areas can be seen. Buttons can be cusomized laser
etched.
Classroom Products- Accessories
Classroom Products
Catalog No.
Description
DXE-USB-S1
DXE-USB-H1
DXE-USB-D1
DKFD-1-XX
CN-XX2GDECORA
USB Extender Kit (TX/RX)
USB Host Side (PC) extender unit for DXW-2EU
USB Destination Side extender unit for DXW-2EUµ
2 Gang Plastic Decora® - Replace XX- WH (White), BK (Black)
2 Gang Metal Plate- Replace XX: AW- Anodized White, AB- Anodized Black
Power Supply
Catalog No.
Description
PS0053-1
24v DC Power Supply for DXW Series (Optional)
Ceiling Speaker
Catalog No.
Description
SKR-22T
2 x 2 Tile Ceiling Speaker - 20Watt - 360˚ Coverage - 2.2” Depth
The SKR-22T is a light weight speaker that delivers clear sound with fidelity not
normally found on typical ceiling speakers. Its ability to reproduce 360˚ sound field allows the use of only
one speaker in a room for mono operation. Just drop the ceiling speaker into a 2x2 ceiling grid and connect the speaker wire and you are done.
The SKR-22T is used with the DXE-CAT-RX3 Series Receiving Devices.
Wall Plate Kits
HDBaseT Wall Plate Kits for AV
Classroom Products
Catalog No.
Description
DXW-2E-S2
DXW-2E-S3-A
DXW-2E-S3L
DXW-2E-S3L-A
DXW-2EU-S2
Includes: DXW-2E + DXE-CAT-RX2 - Available in White or Black
Includes: DXW-2E + DXE-CAT-RX3-A - Available in White or Black
Includes: DXW-2E + DXE-CAT-RX3L - Available in White or Black
Includes: DXW-2E + DXE-CAT-RX3L-A - Available in White or Black
Includes: DXW-2EU + DXE-USB-H1 - Available in White or Black
All Wall Plates are available in White or Black. For a Black plate
add - BK to the P.N. Example: DXW-2E-S2-BK
Kits also include: Power Supply
+
Cables
B
Category 5E
Category 5E UTP and F/UTP
Catalog
No.
4245
No. of
Pairs
4 Pair
Conductor
Type & Nom.
D.C.R
24 AWG
Solid
Insulation
Type &
Thickness
Inches
Polyolefin
None
UTP
Flame
Retardant
Polyolefin/
FEP
None
UTP
26 Ω/Mft
254245
4 Pair
24 AWG
Solid
26 Ω/Mft
M57562
4 Pair
24 AWG
Solid
26 Ω/Mft
4245-OSP
4 Pair
24 AWG
Solid
26 Ω/Mft
4245-IO
4 Pair
24 AWG
Solid
26 Ω/Mft
4245F-GY
4 Pair
24 AWG
Solid
4245F-BL
26 Ω/Mft
254245F-GY
24 AWG
Solid
4 Pair
254245F-BL
26 Ω/Mft
Shielding Jacket Type &
Thickness
Inches
ThermoPlastic
ThermoPlastic
ThermoPlastic
PVC
Plenum
ThermoPlastic
None
UTP
UV Resistant
Water
PE
Blocked
None
UTP
UV Resistant
Water
PE
Blocked
None
UTP
UV Resistant
Water
Polyolefin
Blocked
ThermoPlastic
100%
AL.foil
F/UTP
Flame
Retardant
Polyolefin/
FEP
100%
AL.foil
F/UTP
PVC
Plenum
ThermoPlastic
Nom.
O.D.
Inches
NEC
Type
Nom.
Capacitance
&
Impedance
Jacket
Color
CM R
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
GY, BL, WH,
BK, GN, OR,
YE, PK, SGN
.205
CM P
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
GY, BL, WH,
BK, GN, OR,
YE, PK
.267
Armored
Outdoor
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
UV Black
.255
Outdoor
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
.251
Indoor/
Outdoor
CM
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
GRAY
CM R
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
GRAY
.191
.232
.218
CM P
UV Black
UV Black
BLUE
BLUE
Modular Plugs
B
Category 5E
CATEGORY 5E MODULAR PLUGS
Catalog No.
Description
32-EZP
32-EZSTP
TL-EZRJ45
32-1900-xx
8 POSITION CAT 5E MODULAR PLUG- BAGS OF 50
F/UTP Shielded CAT 5E MODULAR PLUG- BAGS OF 50
CRIMP TOOL FOR 32-EZP
BOOTS: xx: WH, BK, BU, RD, GY, OR, YE, GN
RJ45 Jacks
Category 5E
CATEGORY 5E JACKS
Catalog No.
Description
KJ458MT-C5E-xx
KJS458TL-C5E
SignaMax RJ45 Cat5E Jack- xx: WH, BK, BL, GY, GN, OR, RD, YE
SignaMax RJ45 Cat5E Jack - F/UTP Shielded - Tool less
CATEGORY 5E JACKS - Tool less
CN-705xx
Cat5E Toolless RJ45 Jacks - xx: BK, BL, GN, RD, YE, WH, OR
CATEGORY FEED THRU ADAPTERS
KJS458MT-C5E-WH
KRJ45/5S
Category 5E Feed Thru Adapter
Patch Cables
CATEGORY 5E ASSEMBLIES - SNAG-PROOF
Catalog No.
Length
Jacket Colors
C5EC-114CC-3
C5EC-114CC-6
C5EC-114CC-10
C5EC-114CC-15
C5EC-114CC-20
C5EC-114CC-25
3 Foot
6 Foot
10 Foot
15 Foot
20 Foot
25 Foot
SIGNAMAX
REPLACE CC:
BK BU, GY, RD, WH, YE
Category 5E
CATEGORY 5E F/UTP ASSEMBLIES
CATEGORY 5E ASSEMBLIES - ECONOMY
Catalog No.
WP-66CC-3
WP-66CC-7
WP-66CC-10
WP-66CC-15
WP-66CC-20
WP-66CC-25
Length
3 Foot
6 Foot
10 Foot
15 Foot
20 Foot
25 Foot
Jacket Colors
REPLACE CC:
70- GRAY
72- BLUE
74- RED
Catalog No.
Length
Jacket Colors
C5ECS-314GY-3
C5ECS-314GY-6
C5ECS-314GY-10
C5ECS-314GY15
C5ECS-314GY-20
C5ECS-314GY-25
3 Foot
6 Foot
10 Foot
15 Foot
20 Foot
25 Foot
SIGNAMAX
Gray
Patch Panels
Category 5E
CATEGORY 5E PATCH PANELS
24458MD-C5E
Installation Tools
Catalog No.
Description
12458MD-C5E
24458MD-C5E
48458MD-C5E
48458HD-C5E
24458S-C5E
12458M-C5E
12458H-C5E
CMB-250-P
12 PORT CAT 5E PATCH PANEL 1.75 - 1RU
24 PORT CAT 5E PATCH PANEL 1.75 - 1RU
48 PORT CAT 5E PATCH PANEL 3.50 - 2RU
48 PORT CAT 5E PATCH PANEL 1.75 - 1RU high density
24 PORT CAT 5E Shielded FTP PATCH PANEL 1.75 - 1RU
12 PORT MINI PANEL W/89D BRACKETS
12 PORT MINI HINGED PANEL
Panel Mount Cable Mng. Bar 2.50” Deep
NETWORK CONNECTIVITY TOOLS
Catalog No.
Description
TL-110/66
TL-3650
TRJ45P
TL-EZRJ45
KJMT-8600
110 PUNCHDOWN TOOL
110 ADJUSTABLE PUNCHDOWN TOOL
RATCHET TYPE RJ45 CRIMP TOOL
EZ RATCH MODULAR PLUG CRIMP TOOL
SIGNAMAX- MULTIPAIR PUNCHDOWN TOOL
B
E
Termination of RJ45 Jacks and Plugs - Category 5E
IDC
All Jacks have IDC- Insulation Displacement Connections.
These connections are made with a punch down tool.
The Punch down tool displaces the insulation while the individual
cable is being pressed between two metal clips.
The metal clips make contact with the conductor.
Terminating RJ45 Jacks
1. Strip cable .750”- 1.00”- Do not damage conductors
2. Fan out the individual Pairs. Do not untwist the
individual pairs more than .500”
3. Place each wire into appropriate IDC slot color code
• Choose between T568A or T568B
4. Punch down the individual wire - Do not punch down
more than twice.
5. Place Protector Hood over the punched down wires
Cross-Compatibility:
TL-3650
Termination of RJ45 CAT5E UTP
32--EZP - CONNECTOR
4245 CMR
254245 CMP
Plug Termination:
1. Strip off 2.00” of jacket
2. Straighten and align wires to T568B or T568A - Trim Pairs
3. Insert wires into connector body
4. Pull tight to ensure jacket is .250” inside connector body
5. Verify wire location and orientation
6. Insert 32-EZP connector into crimp tool- TL-EZRJ45PROCT
7. Verify connector is completely seated and cable is fully inserted
8. Squeeze handle of TL-EZRJ45PROCT
9. Remove excess wires
10. Check jacket strain relief
11. Check that contacts are all engaged
12. Check that contact dividers are not damaged
13. Check to see if both ends of the cable have been terminated
Termination of RJ45 CAT5E F/UTP
CN-EZSTP-EG - CONNECTOR
4245F CMR
B
254245F CMP
B
Cables
Category 6A and Category 6
Electrical Specifications listed on page 265
Category 6A F/UTP- Test to 750Mhz - 10G
Catalog
No.
4246AF
No. of
Pairs
Conductor
Type & Nom.
D.C.R
4 Pair
23 AWG
Solid
24 Ω/Mft
254246AF
23 AWG
Solid
4 Pair
Insulation
Type &
Thickness
Inches
ThermoPlastic
FEP
Shielding Jacket Type &
Thickness
Inches
F/UTP
F/UTP
24 Ω/Mft
PVC
Plenum
ThermoPlastic
NEC
Type
Nom.
Capacitance
&
Impedance
Jacket
Color
CM R
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
Black
.305
CM P
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
Black
Nom.
O.D.
Inches
NEC
Type
Nom.
Capacitance
&
Impedance
Jacket
Color
.290
CM R
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
Black
.280
CM P
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
Black
Nom.
O.D.
Inches
NEC
Type
Nom.
Capacitance
&
Impedance
Jacket
Color
CM R
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
GY, BL, WH,
BK, GN
CM P
Nom. Cap.
14 pf/ft*
Nom. Imp
100Ω
GY, BL, WH,
BK, GN
Nom.
O.D.
Inches
.303
Category 6 F/UTP- Test to 550Mhz
Catalog
No.
4246F
No. of
Pairs
Conductor
Type & Nom.
D.C.R
4 Pair
23 AWG
Solid
24 Ω/Mft
254246F
23 AWG
Solid
4 Pair
Insulation
Type &
Thickness
Inches
Shielding Jacket Type &
Thickness
Inches
ThermoPlastic
F/UTP
FEP
F/UTP
24 Ω/Mft
PVC
Plenum
ThermoPlastic
Category 6 UTP
Catalog
No.
4246
No. of
Pairs
Conductor
Type & Nom.
D.C.R
4 Pair
23 AWG
Solid
Insulation
Type &
Thickness
Inches
Polyolefin
None
UTP
Flame
Retardant
Polyolefin/
FEP
None
UTP
24 Ω/Mft
254246
4 Pair
23 AWG
Solid
24 Ω/Mft
Shielding Jacket Type &
Thickness
Inches
OTHER CAT 6 CABLES - See page 176
4246-OSP - CAT 6 OUTDOOR
4246-IO- CAT 6 INDOOR/ OUTDOOR CM RATED
PVC
Plenum
ThermoPlastic
.220
.225
B
Modular Plugs
Category 6A and Category 6
CN-MFP8
CN-1401405012
CATEGORY 6A F/UTP Modular Plug
106190
Catalog No.
Description
CN-MFP8
CN-1401405012
106190
Cat6A F/UTP Modular Plug - Tool less Plug - 10G Transmission
Cat6A F/UTP Modular Plug - Tool less Plug
Cat6A Moldular Plug 10G with Ext.Ground- Requires 12515C
90170
Cat6A 10G Termination Kit: 106190 + 12515C (Crimp Tool)
+15010C ( Strip Tool) + 12360C ( Ext.Ground Crimp Tool)
CATEGORY 6 F/UTP Modular Plug
CN-EZSTP-EG
CN-111S90H34
Cat6 F/UTP Modular Plug - EZ PLUG
Cat6 F/UTP Modular Plug- Recommended
CATEGORY 6 UTP Modular Plug
32-6EZP
Cat6 UTP EZ Plug Modular Plug
CABLE/CONNECTOR BOOTS
CN-111S90H34
32-1900-xx
CN-B0051
CAT6 UTP BOOTS - xx: WH,BK, BU, RD, GY, OR, YE, GN
CAT 6 F/UTP BLACK BOOTS
EZ CONNECTORS ARE SOLD IN BAGS OF 50 AND 500.
106190 - Bag of 100
Modular Plug Crimp Tool
CN-B0051
Catalog No.
Description
TL-EZRJ45PRO CT
12515C
Modular Crimp Tool- Pro Series
Modular Crimp Tool With External Ground Crimping Mechanism
1 Step for CN-111S90H34 Cat6 F/UTP Plugs
Crimp Tool for Cat6A connector 106190
12360C
External Ground Crimp Tool- for 106190 & CN-111S90H34
900020
15010C
Strip Tool for Cat6 and Cat6 A Cables
CONNECTIVITY TOOLS - SEE PG. 175
32-6EZP
12515C
TL-EZRJ45PROCT
RJ45 Jacks
900020
Category 6A and Category 6
CATEGORY 6A F/UTP Jacks
Catalog No.
Description
KJS458TL-C6A
SignaMax RJ45 Cat6A F/UTP- 10G - Metal - Tool less
CATEGORY 6 F/UTP Jacks
KJS458TL-C6C
SignaMax RJ45 Cat6 F/UTP- Metal - Tool less
CATEGORY 6 UTP Jacks
KJ458MT-C6C
SignaMax Cat6 Jack- xx: IV, WH, BK, BL, GY, GN, OR, RD, YE
CATEGORY 6 UTP JACKS - Tool less
CN-706xx
Cat6 Toolless RJ45 Jacks - xx: BK, BL, GN, RD, YE, WH, OR
CATEGORY 6 Feed Thru Adapters
KJS458TL-C6A
KJ458MT-C6C-xx
KRJ45/6S
KRJ45/6S-SH
Cat 6 Feed Thru Adapter Panel Mount
Cat 6 F/UTP Feed Thru Adapter Panel Mount
Termination of RJ45 CAT6 F/UTP
CN-111S90H34 - CONNECTOR
4246F CMR
B
254246F CMP
Termination of RJ45 CAT6A F/UTP
CN-MFP8 - CONNECTOR
4246AF CMR
B
254246AF CMP
Patch Cables
Category 6A and Category 6
Category 6A - Only offered in F/UTP Version
CAT6A F/UTP ASSEMBLIES - SNAG-PROOF
Catalog No.
Length
Jacket Colors
C6AS-314GY-3FB
C6AS-314GY-7FB
C6AS-314GY-10FB
C6AS-314GY-15FB
C6AS-314GY-20FB
C6AS-314GY-25FB
3 Foot
7 Foot
10 Foot
15 Foot
20 Foot
25 Foot
SIGNAMAX
Color: Gray
Category 6
CATEGORY 6 UTP ASSEMBLIES - SNAG-PROOF
Catalog No.
Length
Jacket Colors
C6C-114CC-3FB
C6C-114CC-7FB
C6C-114CC-10FB
C6C-114CC-15FB
C6C-114CC-20FB
C6C-114CC-25FB
3 Foot
7 Foot
10 Foot
15 Foot
20 Foot
25 Foot
SIGNAMAX
REPLACE CC:
BK BU, GY, RD, WH, YE
CATEGORY 6 UTP ASSEMBLIES - Economy
Catalog No.
Length
Jacket Colors
WP-4236CC-3
WP-4236CC-7
WP-4236CC-10
WP-4236CC-15
WP-4236CC-20
WP-4236CC-25
3 Foot
7 Foot
10 Foot
15 Foot
20 Foot
25 Foot
WPW
REPLACE CC:
BL, GY, WH
CAT6 F/UTP ASSEMBLIES - SNAG-PROOF
Catalog No.
Length
Jacket Colors
C6CS-314GY-3FB
C6CS-314GY-7FB
C6CS-314GY-10FB
C6CS-314GY-15FB
C6CS-314GY-20FB
C6CS-314GY-25FB
3 Foot
7 Foot
10 Foot
15 Foot
20 Foot
25 Foot
SIGNAMAX
Color: Gray
Patch Panels
Category 6A
CATEGORY 6A UTP PATCH PANELS
Catalog No.
Description
24458MD-C6A
48458MD-C6A
48458HD-C6A
24 PORT CAT 6A UTP PATCH PANEL 1.75 - 1RU
48 PORT CAT 6A UTP PATCH PANEL 3.50 - 2RU
48 PORT CAT 6A UTP PATCH PANEL 1.75 - 1RU
CATEGORY 6A UTP ANGLED PATCH PANELS
24458A-C6A
48458A-C6A
24 PORT CAT6A UTP ANGLED 1.75” - 1RU
48 PORT CAT6A UTP ANGLED 3.50” - 2RU
CATEGORY 6A F/UTP PATCH PANELS
24458S-C6A
48458S-C6A
24 PORT CAT6A F/UTP 10G - 1.75” - 1RU
48 PORT CAT6A F/UTP 10G - 3.50” - 2RU
Patch Panels
Category 6
CATEGORY 6 UTP PATCH PANELS
Catalog No.
Description
12458MD-C6C
24458MD-C6C
48458MD-C6C
48458HD-C6C
12 PORT CAT 6 UTP PATCH PANEL 1.75 - 1RU
24 PORT CAT 6 UTP PATCH PANEL 1.75 - 1RU
48 PORT CAT 6 UTP PATCH PANEL 3.50 - 2RU
48 PORT CAT 6 UTP PATCH PANEL 1.75 - 1RU
CATEGORY 6 UTP ANGLED PATCH PANELS
24458A-C6C
48458A-C6C
24 PORT CAT6 UTP ANGLED 1.75” - 1RU
48 PORT CAT6 UTP ANGLED 3.50” - 2RU
CATEGORY 6 F/UTP PATCH PANELS
24458S-C6C
24 PORT CAT6 F/UTP SHIELDED - 1.75” - 1RU
CATEGORY 6 UTP MINI WALL MOUNT PANELS
12458M-C6C
12458MH-C6C
CAT 6 MINI PANEL w/89D Bracket
CAT 6 MINI PANEL Hinged
Cable Management
HINGED WALL MOUNT BRACKETS
Catalog No.
Description
HWM-175
HWM-350
HWM-525
1 RMS 1.75”H x 6” D
2 RMS 3.50”H x 6” D
3 RMS 5.25”H x 6” D
DISTRIBUTION RINGS
Catalog No.
Description
CMP-175-A
CMP-350-A
CMP-175-AD
CMP-350-AD
PANEL W 5 1.75”X3” RINGS 1 RMS
PANEL W 5 3”X3” RINGS 2 RMS
PANEL W 5 1.75”X3” RINGS 1 RMS - 1.5”Wx4”H WIRING DUCT
PANEL W 5 3”X3” RINGS 2 RMS - 3”Wx4”H WIRING DUCT
Designation Lables see page- 179