4950 - Cable shielding tie wrap

4950 - Cable shielding tie wrap
Holland Shielding Systems BV provides an easy to use tie-wrap solution. This solution is
very easy to install because no tools are required. The tie-wrap is made of plastic, and
the electrically conducting layer is made of a springy metal wire mesh which can easily
be pulled together by tightening the tie-wrap.
4950 series EMI cable shielding tie-wrap provides a highly effective shield terminations
for any size and type of backshell design. EMI cable shielding tie-wrap have successfully
passed rigorous shock, vibration, and thermal cycle testing. Unlike other shield
termination systems, not a single tool applies shield termination faster.
4950 series EMI cable shielding tie-wrap provide a quick and reliable way of terminating
cable shielding for critical applications in aircraft, military vehicles, and other sensitive
electronic equipment.
EMI cable shielding tie-wrap
To protect sensitive equipment,4950 series EMI cable shielding tie-wrap is
designed to provide these benefits:
Virtually eliminates RFI/EMI/EMP leakage paths.
No tool installation.
Maintains constant tension under extreme environmental conditions.
Clamp small diameters as easily, quickly and reliably as large diameters.
●
●
●
●
EMI cable shielding tie-wrap
Partnumber / Ordercode:
4950
..
XXX
* Note: The red blocks are required
Sample of Partnumber:
4950
..
10
1
Revision date: 2014-08-05
Infratron GmbH · Postfach 50 03 06 · 80973 München
Tel.: 089/158 126-0 · Fax: 089/158 126-99 · www.infratron.de · e-mail: [email protected]
Produkt anfragen