METAL PRODUCTS COMPANY

PUBLIC AUCTION
METAL PRODUCTS COMPANY
Precision Minster Stamping Plant
Plant Closing:
SALE DATE: Tuesday, May 3rd
INSPECTION: Monday, May 2nd
5757 W. 130th Street
Parma, Ohio 44130
10:00 am EDT
9:00 am - 4:00 pm EDT
(14) Minster Straight Side Presses, 60 Ton - 400 Ton • (15) Minster Open Back Gap Presses, 22 Ton - 60 Ton
Press Feed Equipment • Lathes • Vertical Mills • Grinders • Drills • Hone • Band Saws • Spot Welders
Air Compressor • Inspection Equipment • Material Handling Equipment • Pallet & Die Racking • MUCH MORE!
200 Ton
400 Ton
150 Ton
60 Ton
105 Revere Drive, Suite C
Northbrook, Illinois 60062
Phone: 224.927.5320
[email protected]
www.pplauctions.com
Attend in Parma, Ohio or Bid Online at
Buyer’s Premium 15% Onsite, 18% Online
PPL Ohio License No. 2015000063 Ohio Auctioneer License Nos.: David Muslin 2015000062, Joel Bersh 2015000061
400 Ton
150 Ton
200 Ton
150 Ton
200 Ton
2
PPL Auction
Phone: 224.927.5320
100 Ton
www.pplauctions.com
75 Ton
75 Ton
60 Ton
60 Ton
60 Ton
MINSTER STRAIGHT SIDE PRESSES – 60 Ton to 400 Ton
Minster 400 Ton 2-Point Hevi-Stamper Straight Side Press Model E2-400-96-48, S/N 28334 (1994), 0 - 70 SPM, 12” Stroke, 6” Adjustment,
28” Shut Height, 48” x 96” Bed, 6” Bolster, 30” Windows, Scrap Roller, Air Clutch & Counterbalances, Minster Servo Feed Model MEF6-26S
(S/N 18-50436) with Indramat Control, Programmable Limit Switch, Smart Pac, Auto Set 1504 Wintriss Load Analyzer (#164)
Minster 200 Ton 2-Point Hevi-Stamper Straight Side Press Model E2-200-84-42, S/N 27649 (1992),
0 - 120 SPM, 6” Stroke, 6” Adjustment, 17” Shut Height, 7” Bolster, 24” Windows, Minster 20” Feed Model MEF5-20 (S/N 1850270),
Air Clutch & Counterbalances, Spectrum Feed Control (#163)
Minster 200 Ton 2-Point Hevi-Stamper Straight Side Press Model E2-200-72-42, S/N E2-200-27369, 0 - 120 SPM, 6” Stroke, 6” Adjustment,
17” Shut Height, 42” x 72” Bed, 7” Bolster, 24” Windows, Minster 14” Feed Model 5-14EMF (S/N 1850158), Air Clutch & Counterbalances (#162)
Minster 150 Ton 2-Point PieceMaker Straight Side Press Model P2-150, S/N P2-150-26894,
0 - 120 SPM, 6” Stroke, 4” Adjustment, 17” Shut Height, 40” x 60” Bed, 6” Bolster, 20” Windows, Air Clutch & Counterbalances,
Minster 16” Electric Press Feed, Indramat CFS Control (#161)
Minster 150 Ton 2-Point PieceMaker Straight Side Press Model P2-150, S/N 25420,
75 - 150 SPM, 5” Stroke, 4” Adjustment, 14” Shut Height, 40” x 60” Bed, 6” Bolster, 20” Windows, Air Clutch & Counterbalances (#154)
Minster 100 Ton 2-Point PieceMaker Straight Side Press Model PM2-100, S/N 20914,
0 - 200 SPM, 3” Stroke, 4” Adjustment, 10” Shut Height, 31” x 54” Bed, 5” Bolster, Air Clutch & Counterbalances,
U.S. Baird 12” Model 1312A Hitch Feed with Straightener, Part Quality Monitoring System (#147)
Minster 75 Ton Piecemaker 2-Point Straight Side Press Model P2-75, S/N P2-75-19821, 100 - 200 SPM, 3” Stroke, 4” Adjustment,
10” Shut Height, 5” Bolster, 31” x 48” Bed, 16” Windows, Air Clutch & Counterbalances, Vamco 12” Belt Drive Feeder with Straightener
Minster 75 Ton Piecemaker 2-Point Straight Side Press Model P2-75-42, S/N 11791,
3” Stroke, 4” Adjustment, 31” x 42” Bed, 16” Windows, Air Clutch & Counterbalances (#115)
(5) Minster 60 Ton 2-Point PieceMaker Straight Side Presses Model P2-60-42,
125 - 250 SPM, 3” Stroke, 3” Adjustment, 10” Shut Height, 25” x 42” Bed, 3.5” Bolster, 12” Windows, Air Clutch & Counterbalances,
S/Ns 25421 (#155), 13353 (#120), 13165 (#119) & 15895 (#128) with Vamco 8” Belt Drive Feed, S/N 19820 (#139) with U.S. Baird Hitch Feed
Minster 60 Ton 2-Point PieceMaker Straight Side Press Model P2-60-48, S/N 20916,
125 - 250 SPM, 3” Stroke, 3” Adjustment, 10” Shut Height, 25” x 40” Bed, 3.5” Bolster, Air Clutch & Counterbalances
PPL Auction
Phone: 224.927.5320
www.pplauctions.com
3
s
MINSTER OPEN BACK GAP PRESSES – 22 Ton to 60 Ton
(4) Minster 60 Ton Open Back Gap Presses Model B1-60, 125 - 250 SPM, 3” Stroke, 3” Adjustment, 8.5” Shut Height, 21” x 32” Bed,
3.5” Bolster, Air Clutch & Counterbalances, S/N 21729 (#151) with Programmable Limit Switch & U.S. Baird 9” Hitch Feed,
S/N 20915 (#145) with U.S. Baird 9” Hitch Feed, S/N 19819 (#138) with Programmable Limit Switch & Vamco 8” Belt Drive Feed, S/N 21730
Minster 60 Ton Open Back Gap Press Model B1-60, S/N 20916, 125 - 300 SPM,
3” Stroke, 3” Adjustment, 10” Shut Height, 21” x 32” Bed, 3.5” Bolster, Air Clutch & Counterbalances, U.S. Baird 9” Hitch Feed (#146)
Minster 60 Ton Open Back Gap Press Model 6SS-FB, S/N 27013, 90 SPM, 6” Str., 2.75” Adj., 11.5” SH, 21” x 32” Bed, 2.5” Bolster, Air Clutch (#97)
(2) Minster 45 Ton Open Back Gap Presses Model B1-45, 125 - 250 SPM, 3” Stroke, 2.75” Adj., 8.5” SH, 18” x 28” Bed, 3.5” Bolster, Air Clutch
& Counterbalances, S/N 21727 (#153) with U.S. Baird 9” Hitch Feed with Straightener, S/N 21728 (#152) with U.S. Baird 8” Hitch Feed
Minster 45 Ton Open Back Gap Press Model B1-45, S/N 15896,
400 SPM, 2” Stroke, 2.75” Adjustment, 8.5” Shut Height, 18” x 28” Bed, 2.25” Bolster, Air Clutch, Vamco 6” Feed with Straightener (#127)
Minster 45 Ton Open Back Gap Press Model B1-45, S/N 14734,
100 - 250 SPM, 3” Stroke, 2.75” Adjustment, 8.25” Shut Height, 18” x 28” Bed, 2.25” Bolster, Air Clutch, with U.S. Baird 9.5” Hitch Feed (#125)
(3) Minster 32 Ton Open Back Gap Presses Model 4SS, S/Ns 24108 (#90), 24107 (#39), 27370 (#41- needs repair),
130 SPM, 3” Stroke, 2.25” Adjustment, 10” Shut Height, 16” x 24” Bed, 2” Bolster, Air Clutch
Minster 32 Ton Open Back Gap Press Model B1-32, S/N 18260,
400 SPM, 2” Stroke, 2.25” Adjustment, 8.25” Shut Height, 15” x 24” Bed, 2” Bolster, Air Clutch, 6” Hitch Feed (#137)
Minster 22 Ton Open Back Gap Press Model B1-22, S/N 16596, 200 - 600 SPM,
1.5” Stroke, 2” Adjustment, 8” Shut Height, 12” x 20” Bed, 1.5” Bolster, Air Clutch & Counterbalances, 4” Hitch Feed with Straightener (#129)
PRESS FEED EQUIPMENT
Straightening Line including:
Minster Reel/Car with Snubber Arm - 35,000 lb. Car Model MCC2-35 (S/N 13-90060) & 20,000 lb. Reel Model 20-26S (S/N 13-70267), 72” x 20”-24”;
Minster Straightener Model MS-30-26-7 (S/N 13-50229), 800 IPM, 26” x .350”, with Peeler;
Minster Thread Table Model M-TT-18-26S (S/N 13-80065)
Minster Double End Coil Reel Model 6-14D, S/N 13-70067, 8000 lb. Capacity, 60” O.D., 16” - 20” I.D.
Minster Double End Coil Reel Model 6-14, S/N 13-70068, 8000 lb. Capacity, 60” O.D., 15” - 20” I.D.
ATTEND or BID ONLINE at
Minster Uncoiler Model 6-20D, S/N 13-70150, 6000 lb. Capacity, 60” O.D. , 16” - 20” I.D.
(7) Minster Double End Coil Reels Model 4-14D or MR4-14D, 4000 lb. Capacity, 60” O.D., 16” - 20” I.D.
(8) Minster Straighteners Model MS-20-14-7, 1200 IPM, 14” x .25” or 14” x .187”
Minster Servo Feeder Model MEF-3-14S, S/ N 18-50216, with Spectrum Control (#154) • Minster Feed Model MEFS-20, S/N 850270
Minster Feed Model 5-14EMF, S/N 1850158 • Jaco 4000 lb. (est.) Coil Reel • (6) Assorted Pallet Coil Reels
(4) Ass’t PA, Jaco, Rapid Air, Cooper Weymouth Stock Straighteners, 2” - 8” • (6) Ass’t Rapid Air, Jaco, Littell 3000 lb. - 4000 lb. Coil Reels
(8) Rowe & Jaco 2000 lb. Coil Cradles • (10) Assorted 12” Portable Power Inclined Scrap Conveyors
4
PPL Auction
Phone: 224.927.5320
www.pplauctions.com
LATHES • VERTICAL MILLS • GRINDERS
Leblond 16 x 56” Geared Head Engine Lathe, S/N 120328, 1800 RPM, 10” 3-Jaw Chuck, Carriage w/ Cross Slide, Threading, Tailstock, Pan Bed
Harrison 16” x 64” Geared Head Engine Lathe Model 600, S/N 351124-1078,
2200 RPM, 10” 3-Jaw Chuck, Carriage with Cross Slide, Threading, Tailstock, Pan Bed
South Bend 9” x 24” Toolroom Lathe, S/N 5472-INA10
Cleveland 4 HP Variable Speed Vertical Mill Model CK-VH1052TM, S/N 772011, 10” x 52” Table, Chrome Ways, Digital Readout
Lagun 2.2kw Variable Speed Vertical Mill Model FTV-1S, S/N SE26816, 10” x 44” Work Table
Bridgeport 1-1/2 HP Variable Speed Vertical Mill, S/N 138674, 9” x 42” Work Table
Ex-Cell-O 1 HP (est.) Vertical Mill Model 602, S/N 60210298, 9” x 40” Table, Digital Readout • 18” T-Slot Rotary Table
Brown & Sharpe 10” x 30” Hyd. Surface Grinder Model Micromaster 1030, S/N 523-1030-228, 10” x 30” Permanent Magnetic Chuck, Coolant
Mitsui 8” x 18”, 14” High Column Surface Grinder Model MSG-250MH, 8” x 18” Walker Electromagnetic Chuck, with Walker Chuck Control
(2) Mitsui 6” x 12” Surface Grinders Model 200MH, S/Ns 80022481, 85065836, 6” x 12” Walker Electromagnetic Chuck, w/ Walker Chuck Control
Harig 6” x 12” Hand Feed Surface Grinder Model Super 612, S/N 10063, 6” x 12” Permanent Magnetic Chuck
Harig 6” x 12” Hand Feed Surface Grinder Model 612, 6” x 12” Permanent Magnetic Chuck, with Spindle Driven High Speed Grinding Head
(3) Harig 6” x 12” Hand Feed Surface Grinders Model 612, S/Ns 17832, 18207, 17512, 6” x 12” Permanent Magnetic Chuck
Oliver of Adrian Bench Top Die Filer • Postel Bench Top Die Filer • Rockwell 4” x 12” Belt / Disc Sander
Powermatic 6” x 12” Belt / Disc Sander • 8” & 10” Heavy Duty Double End Pedestal Grinders • (4) Dustkop Self Contained Dust Collectors
DRILLS • HONE • BAND SAWS
Arboga 3.7kw 42” Arm x 13” Column Radial Drill, 1500 RPM, Power Elevation & Clamping, 28” x 48” Base, 20” x 25” x 10” Box Table
Alzmetall 26” Geared Head Drill Press Model AB3HST, S/N 2023, 18” x 24” T-Slot Oil Groove Table
Powermatic 20” Variable Speed Drill Press Model 1200, S/N 9120V181, 20” x 22” T-Slot Oil Groove Table
Powermatic 20” Drill Press Model 1200, S/N 8820V393, 16” x 18” T-Slot Oil Groove Table • Cummins 16” Bench Drill • Jet 13” Bench Drill
Tooling including:
Grinding Accessories, Assorted J&S Tool Radius Wheel Dressers, Yuasa Wheel Dresser, Harig Grind-Alls, Collet Indexers, Magnetic Sine Chucks,
Magnetic Blocks, Toolroom Accessories, Machine Vises, Drill Vises, Clamps, Hold Downs, Drills, Taps, Reamers, Drill Chucks, Radius Cutters
Sunnen Precision Honing Machine Model MBB1660, S/N 84265, Coolant • Assorted Hone Tooling
Marvel 9” x 20” Horizontal Band Saw Model 916M, S/N 86134, Coolant • Carolina 6” x 10” Horizontal Band Saw Model HD10, S/N HD1016812
DoAll 20” Vertical Band Saw Model 2013-V, S/N 457-891224, 26” x 26” Tilting Table, Butt Welder
DoAll 16” Job Selector Vertical Band Saw, S/N 1647270, 20” x 20” Tilting Table, Butt Welder
PPL Auction
Phone: 224.927.5320
www.pplauctions.com
5
SPOT WELDERS • AIR COMPRESSOR
Federal 75 KVA Pneumatic Press Type Spot Welder Type PA-1-12-PROJ, S/N 40008-100, 16” Throat, Entron Timer & Controls, Light Curtain
Federal 75 KVA Pneumatic Press Type Spot Welder Model PA-1-12-SPOT, S/N 33568-01-1, 16” Throat, Weltronic Timer & Controls
Peer 50 KVA Custom Spot Welder Model P-25, S/N 1246-2, 15” Throat, Solid State Atek Tru Amp Timer & Controls, Light Curtain
Wean United Federal 50 KVA Pneumatic Press Type Spot Welder Model BAP-3-8, S/N 35189-01-1, 8” Throat, Entron Timer & Controls
Peer 85 KVA Custom 2-Gun Spot Welder Model Special, S/N 920070-2, with Pneumatic Hold Down, Medal Timer & Controls
Tweezer Weld Bench Top Spot Welder Model TW-3, S/N 7521, 7” Throat, Touch-O-Matic, Entron Timer & Controls
Standard Custom Horizontal Spot Welder, Hold Down, Entron EN1000 Timer & Controls • Large Assortment Spot Welder Accessories & Tooling
Leroi Dresser 100 HP (est.) Rotary Air Compressor Model 100SS, S/N 492X127, Enclosed
Airtek Cold Trap Refrigerated Air Dryer Model CT800, S/N 95-55786, 200 PSIG
INSPECTION EQUIPMENT
Mitutoyo Bright Coordinate Measuring Machine Model BRT 707, S/N 0051603,
30” x 40” x 24”, Renishaw PH9 Probe, Joystick, with CPU & Printer, 38” x 52” Granite Table, CAD Measure 6000 Software
Mitutoyo Coordinate Measuring Machine Model F604, S/N 8506232, 21.5” x 32.5” Granite Table, Renishaw PH8 Probe, CPU & Printer
S-T Industries 30” Optical Comparator Model 22-2600, S/N T884802,
Gagemaster/GMX Digital Readout, Joystick, Protractor Ring, 8” x 35” Work Stage, Surface & Profile Illumination
(2) Baty Gagemaster 14” Bench Top Optical Comparators, Quadra Chek 2000 Digital Readout
(15) Assorted Gagemaster 14” Bench Top Optical Comparators, with Quadra Chek II Digital Readout (some with tower computers)
Wilson Rockwell Digital Hardness Tester Model B533-T, S/N 91102601 • Fischer Dualscope Coating Thickness Meter
Dillon Bench Top Tensile Tester, with Digital Readout • (30) Assorted Granite Surface Plates to 18” x 36”
American Scientific Digital Lab Balance • 4” Abrasive Cut-off Sample Maker
Inspection Equipment including:
Pin Gauges, Gauge Blocks, Microscopes, Gauge Stands, Eddy Current Test Instrument, MB Dynamics Tensile Tester, Calipers, Micrometers, etc.
TUB DUMPER • PALLET RACK & DIE RACK
Hercules Hydraulic Tub Dumper, with Hydraulic Power Unit
(125) Sections 30” & 24” Multiple-Tier Heavy Duty Die Storage Rack • (25) Sections 42” Deep Multi-Tier Pallet Rack
6
PPL Auction
Phone: 224.927.5320
www.pplauctions.com
MATERIAL HANDLING EQUIPMENT
Baker 8000 lb. Electric Forklift Model 100D-SS-32, S/N C1912-1, Solid Tires, Overhead Guard, 124” Lift of 2-Stage Mast, Side Shift
Baker 6000 lb. Electric Die Truck Model EF-W, S/N 55212, 123” Lift, with Die Puller Slide, Side Shift
Baker 4000 lb. (est.) Electric Forklift Model E25B, S/N 265-0014, Overhead Guard, Solid Tires, 191” Lift of 3-Stage Mast
Big Joe 4000 lb. Electric Walk-Behind Stacker Lift Model PDH 40-130, S/N 339450, 24 Volt, 130” Lift
Baker 3500 lb. Electric Forklift Model B-35-FE, S/N 332807503316, Solid Tires, Overhead Guard, 168” Lift of 3-Stage Mast, Side Shift
Yale 3000 lb. Electric Forklift Model ERP030TDN36SE077, S/N 541799, Solid Tires, Overhead Guard, 172” Lift of 3-Stage Mast, Side Shift
Baker 2500 lb. (est.) Electric Forklift Model BTE/S35, S/N 324C11301616, Solid Tires, Overhead Guard, Triple Mast, Side Shift
Big Joe 2000 lb. Electric Reach Walk-Behind Stacker Lift Model PDR 20-130, S/N 314727, 130” Lift, 24 Volt, with Squeezer
Genie 650 lb. Super Lift Advantage Portable Material Lift Model SLA-25, S/N 5500-9615 • (2) Yale Electric Pallet Lifts • (3) Big Joe Stacker Lifts
Battery Handling Systems Dual Battery Charging Station, with Portable Battery Retrieval Cart & Exide 24 Volt Charger
Exide 36 Volt Depth Charger Battery Charger Model 03-18-950B-03 • (5) Assorted Exide, Mac & Hobart 24 Volt Battery Chargers
(1000+) 15” x 24” x 7” Deep Stacking Plastic Tote Pans • (300) 13” x 21” x 6” Deep Galvanized Dip Baskets
(11) 30 x 32” x 22” High Corrugated Steel Stacking Parts Tubs • (10) 20” x 32” x 16” High Stacking Steel Wire-Tainers
MISCELLANEOUS EQUIPMENT
Carolina 50 Ton Manual Hydraulic H-Frame Shop Press Model CBP 1200, S/N 4676
(15) Assorted Famco No. 8, No. 10, No. 80 & No. 18 Kick Presses • (6) Assorted Grotz & Snow 2-Spindle Tapping Heads
Snow Lead Screw Tapper, S/N M39912-974, 3/4 HP, 10” x 25” Table, Coolant • Hopper Feed Style 39A Riveter, S/N P1552, with Safety
(2) Orbitform Custom Rotary Riveters Models B-750 & M-23, S/Ns 9410-292, 15075, Custom Clamp Station, Light Curtain
Bench Top Custom Pneumatic Assembly Machine, with (2) Vibratory Feed Bowls • Globe Oblique Tumbling Barrel
(2) Tennsmith 52” x 16 ga. Kick Shears Model 75216 • Tennsmith 4’ x 16 ga. Bench Top Finger Brake Model U48.16
Whitney Angle Fabricating Center, with Shear, Notch & Bend Stations • Beverly 4” Bench Top Shear • DiAcro Bench Top Rotary Bar Bender
Electra 3-Chamber 10kw Electric Furnace Model 6714, S/N 339, (3) 6” x 6” x 12” High Chambers, (2) Swing & (1) Guillotine Doors, 2000°/800°
Cress Electric Furnace Model CK-136, S/N S8704, 10” x 12” x 6” High Interior, Guillotine Door
Samuel Rotary Pallet Stretch Wrapper Model SLP200, 57” Dia. Rotary Table • 3M 3M-Matic Pass-Thru Top Case Taper, with Roller Conveyor
Empire 2-Hole Reach-in Blast Cabinet Model PF-3648, S/N 2589, with Hose & Nozzle
(3) Assorted 6000 lb. to 10,000 lb. Digital Floor Scales • Assorted Roller Bed Digital Scales, with Digital Readout
Setra 5000 lb. Digital Floor / Bench Top Counting Scale, 60” x 60” Platform, Digital Readout
Valley Equipment Co. 8-Tank Oil Distribution Station (one tank missing) • Valley Equipment Co. 6-Tank Oil Distribution Station
(12) Sections Storage Shelving with Multiple-Drawer Storage Cabinets • 27” x 10’ Roller Conveyor • (2) Nobles Electric Floor Scrubbers
Carolina Push-Around Hydraulic Engine Lift • Assorted Scaffold Frames & Braces
Factory Equipment including: Power Hand Tools, Lifting Chains, Coil Grabs, Plate Grabs, Swivel Lifting Eyes, Slings, Spreader Beams, etc.
PPL Auction
Phone: 224.927.5320
www.pplauctions.com
7
105 Revere Drive, Suite C
Northbrook, Illinois 60062
PUBLIC AUCTION
W. 130th Street
METAL PRODUCTS COMPANY 5757
Parma, Ohio 44130
SALE DATE: Tuesday, May 3rd
www.pplauctions.com
INSPECTION: Monday, May 2nd
10:00 am EDT
9:00 am - 4:00 pm
Minster Stamping Plant
400 Ton
ATTENTION: PLANT MANAGER
OR MACHINERY BUYER
(14) Minster Straight Side Presses
- 60 Ton to 400 Ton (15) Minster Open Back Gap Presses
- 22 Ton to 60 Ton Press Feed Equipment • Much More
PUBLIC AUCTION
Triad METAL PRODUCTS COMPANY
SALE DATE: Tuesday, May 3rd 10:00 am EDT
INSPECTION: Monday, May 2nd
Auction Terms & Conditions
REGISTRATION & BIDDING: Everything will be sold to the highest bidders for cash, in accordance with the auctioneer’s normal “Terms of Sale”, which
are available at the site or by request at 224-927-5320. A 15% Buyer’s Premium will be added to the final bid price. All bids are in US dollars. An
18% Buyer’s Premium will be added to online bids. Your bid is a contract: Place a bid only if you’re serious about buying the item. If you are the
high bidder, you will enter into a legally binding contract with PPL Auction.
PAYMENT: All successful Bidders agree to make full payment to PPL Auction at the conclusion of the sale. Only Bank Wire Transfer, Bank
Check or Cashier’s Check payable to PPL Auction will be accepted. Firm and personal checks accepted only if accompanied by a letter from
your bank guaranteeing your funds. If you are using a wire transfer your bank may wire the funds the day after the sale. All sales are subject
to sales and/or local taxes unless a signed exemption form is presented at the time of the purchase. Payment will be made in US dollars only.
VERIFY DESCRIPTIONS: Note: Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty
or guarantee, expressed or implied, as to the accuracy of the information contained in the auction brochure, lot catalog or sale web pages.
Buyer agrees to accept assets purchased per standard auction terms, “AS IS, WHERE IS, WITH ALL FAULTS” WITHOUT ANY
REPRESENTATION OR WARRANTY BY PPL AUCTION OR ANY OTHER PERSON. THERE ARE NO EXPRESSED OR IMPLIED
REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ASSETS INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION OR
WARRANTY REGARDING THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
REMOVAL & RIGGING: Removal and Rigging is the responsibility of the buyer. Anyone, either a buyer or a rigger, who uses a powered vehicle
to remove anything from the auction site, will be required to present a certificate of insurance. Removal may begin when the auction has
completed and payment in full has been made.
ISSUANCE OF TITLE: Titles relative to titled assets purchased will be mailed to the purchaser’s address on file after payment is received and cleared.
All invoices must be paid in full at end of auction. Any merchandise not paid for at this time will be considered abandoned and may be resold
by auctioneer, any loss incurred in the resale to be borne by the original buyer.
9:00am - 4:00pm
UNABLE TO ATTEND?
Bid online in real time at
ON-LINE BIDS SUBJECT TO 18% BUYER’S PREMIUM
Scan
with
your
phone
to link
to our
website
105 Revere Drive, Suite C • Northbrook, Illinois 60062
Ph: 224.927.5320 • Fax: 224.927.5311 • [email protected]
www.pplauction.com
PPL Ohio License No. 2015000063 Ohio Auctioneer License Nos.: David Muslin 2015000062, Joel Bersh 2015000061