Drain Cleaning Jetters Contractors Guide

Drain Cleaning Jetters
Contractors Guide
Jetting Nozzles • Root Cutting Nozzles • Premium Jet Hose • Hose Reels • Accessories
rcial,
co m m e i a l ,
r
i n d us t i n i n g
,m
m ar ine e
& mor
MUSTANG
AUSTRALIA
NOZZLES
phone 07) 4725 8880
•
fax 07) 4725 5977 • www.airlesstownsville.com.au
Drain Cleaning Jetters
General Nozzles
• Box Set • Remote Mini Reel • Nozzles
Contractor Product Guide
jetters edge products
Mustang Remote Mini Hose Reel
Mustang Nozzle Box Kits
Mustang Remote Mini Reel
Mustang Nozzles Budget Kit
50 or 60m hose
Light weight electro-polished stainless frame
with corrosion protection, 3 nozzle holders and
Mustang 3/16" hydro-jet thermo plastic jet hose
with a stainless silt proof quick connect coupler
on the hose end with an extended Mustang
stainless steel ball valve handle. Rated to
5000 psi. Nozzles ordered seperately.
7 piece budget nozzle kit (pictured).
Part No. MNBKB
Mustang Nozzles Deluxe Kit
15 piece deluxe nozzle kit.
Part No. MNBKD
Part No. MRWH (50m hose)
Part No. MRWH60 (60m hose)
General Nozzles
Part No. BT6R1F
Computer designed nozzle to enter a blockage quickly with
maximum thrust. Recommend using a speed cone with this
nozzle. 6 rear jets at a tight angle and 1 front jet.
Screwdriver Nozzle
Bandit Nozzle 3/8"
Bandit Nozzle 1/2"
Screwdriver Nozzle 3/8"
Screwdriver Nozzle 1/2"
Bandit Nozzle
Part No. SD6R1F
Features a blade at the front of the nozzle with an offset jet
so you can clear most stubborn blockages just by twisting the
hose. Also has 6 rear thrusting jets.
Part No. BT6R1F10
Part No. BT6R1F12
Part No. BV6R2F
2 offset forward facing jets that help penetrate at the front of
the nozzle and 6 rear jets to quickly thrust the nozzle to the
blockage. Has reduced thrust due to 2 front jets.
Ferret Nozzle
Bullet Nozzle
Part No. B6R1FC
This is a great nozzle for penetrating tight blockages because
the nozzle is forward of the cone helping it to burrow deep into
the choke. 3 compressor tips available.
Grease Ball Nozzle
Compressor Penetrator Nozzle Part No. C3R1F
Negotiator Penetrator Nozzle Part No. N3R1F
Compressor Invader Nozzle Negotiator Invader Nozzle Part No. F6R2F
2 offset forward facing jets that help penetrate at the front of
the nozzle, 3 rear jets on the side and 3 jets at the back of the
nozzle. Has reduced thrust due to 2 front jets.
Part No. GB8
Totally spherical with 8 rear thrusting jets only. Designed for
extreme thrust and the ability to clean grease off the sidewall
of pipes but has proven to be effective on root chokes.
3 large rear jets and 1 forward jet.
Part No. C6R1F
Great penetrating thruster with 6 rear jets and 1 forward jet.
Compressor Thruster Nozzle Part No. C6R
6 rear thrusting jets only.
Predator Penetrator Nozzle Part No. P3R1F
3 large rear jets and 1 forward jet.
Predator Invader Nozzle Part No. P6R1F
Great penetrating thruster with 6 rear jets and 1 forward jet.
The Predator - 1/4" BSP good general
penetrating nozzle with pointed nose
Quick release Hose Tail
(with alan key broach)
Part No. SD6R1F12
Beaver Nozzle
3 large rear jets and 1 forward jet.
The Compressor - 1/8" BSP used for tight access
drains, whip hoses and the Bullet adaptor
Part No. SD6R1F10
Part No. N6R1F
Great penetrating thruster with 6 rear jets and 1 forward jet.
The Negotiator - 1/4" BSP negotiates
itself around tight traps and bends
Negotiator Thruster Nozzle Root Rat Nozzle
Part No. RR6R1F
This is a popular nozzle because of its jet configuration.
1 forward, 3 behind the nose at 45° and 3 at the rear at 30°.
It will open a blockage quickly and thoroughly.
Predator Thruster Nozzle Part No. P6R
Rotating Nozzle Cone & Tail 1/4"
Cone & Tail 1/8"
Part No. CT8
Part No. CT4
Stainless Steel Quick Release
6 rear thrusting jets only.
Hose Tail 1/4"
Hose Tail 1/8"
Part No. HT8
Part No. HT4
PVC Wear Cone 1/4"
PVC Wear Cone 1/8"
Part No. PC8
Part No. PC4
phone 07) 4725 8880
•
Part No. N6r
6 rear thrusting jets only.
Part No. MV846
3 rotating rear jets, stainless steel, 1/4" Bsp F, 3650 psi.
Available in the following sizes: 040, 045, 055 and 065.
Part No. QR8SS
1/4" with patented double silt proof o'ring
Brass Quick Release
Part No. QR8BR
fax 07) 4725 5977 • www.airlesstownsville.com.au
Ver 1.0 Apr10
2
Drain Cleaning Jetters
Root Cutters & Hose
• Root Cutters • Hose Reels • Jet Hose
Contractor Product Guide
jetters edge products
Root Cutters
Root Ranger Complete
Part No. RR8TC
Root cutting turbine with removable front plug and quick
connect adaptor.
Large Root Ranger
Double Barrel Root Ranger
Part No. RRD8
Twin root cutting turbines with quick connect adaptor.
Root Ranger Front Jet
Root Ranger Extension
Part No. WGS25
Prevents the nozzle from turning up inspection caps.
Root Ranger Repair Kit
Replacement Turbine
Part No. LT83055
Suit Root Ranger. Can be used on the end of hand lances.
180° Pressure Bend
Replacement Turbine (Large) 180° Pressure Bend (Large) Part No. T83
Part No. LRR8TC
1/2" root cutting turbine. Adaptor available to quick connect or
screw into 1/4" hose. Flow rate from 21 LPM to 90 LPM.
Part No. M6J
Removable front ceramic jet with flow straightener in body.
Part No. RTRK8
Replacement ceramic insert.
Part No. LSS8TM
With front plug only. Suit Root Ranger.
Part No. SS8TM
Hose Reels
Manual Hose Reel
Part No. RSMR
Powdercoated aluminium with 4-way stainless rollers and high
pressure stainless steel swivel. Will hold the following hoses:
1/4" jet hose 150m, 3/8" jet hose 120m, 1/2" jet hose 90m,
1/2" garden hose 120m, 3/4" garden hose 90m.
Gal Hose Reel 1/2"
Part No. HR20
Gal Hose Reel 3/4"
Part No. HR30
Small High Press. Hose Reel
Part No. PW134
Fixed bracket. Will hold the following hoses: 1/4" jet hose 50m,
3/8" jet hose 40m, 3/16" jet hose 60m, 1/2" garden hose 60m,
3/4" garden hose 30m.
Electric Hose Reel
Large High Press. Hose Reel Part No. HR4416
Double Stacked Hose Reel
Seperate bracket. Will hold the following hoses: 1/4" jet hose
50m, 3/8" jet hose 40m, 3/16" jet hose 60m, 1/2" garden hose
60m, 3/4" garden hose 30m.
S/Steel Shortened Bracket
Part No. B4416
1/2" reel holds 45m hose (hose not included).
3/4" reel holds 45m hose (hose not included).
Part No. RESR
Powdercoated aluminium with 4-way stainless rollers and high
pressure stainless steel swivel. Optional remote control and
archimedes winder. Will hold the following hoses: 1/4" jet hose
150m, 3/8" jet hose 120m, 1/2" jet hose 90m, 1/2" garden hose
120m, 3/4" garden hose 90m.
Part No. RDST
Powdercoated aluminium with 4-way stainless rollers and high
pressure stainless steel swivel. Will hold the following hoses:
1/4" jet hose 120m, 3/8" jet hose 90m, 1/2" jet hose 80m,
1/2" garden hose 90m, 3/4" garden hose 80m.
Optional component (pictured).
Armadillo Bluflex 5000 Jet Hose
3/8" Bluflex Jet Hose x 60m Part No. bf3/8
1/4" Bluflex Jet Hose x 60m Part No. bf1/4
3/16" BlufleJet Hose x 60m Part No. bf3/16
1/8" Bluflex Jet Hose x 20m Part No. bf1/8
Any size or length available!
phone 07) 4725 8880
•
fax 07) 4725 5977 • www.airlesstownsville.com.au
Ver 1.0 Apr10
3
Drain Cleaning Jetters
Jetter Accessories
• Accessories • HP251SAE • Services
Contractor Product Guide
jetters edge products
Jetter Accessories *
* Other parts, fittings and accessories available
1/8" Male Connector
Part No. ht4m
Quick release to compressor nozzles (with alan key broach - for
1/8" nozzles).
1/8" Bullet Blank
1/8" Female Connector
1/4" & 1/8" Compressor Adaptor Part No. ca8
Part No. ba4
Used to join the compressor nozzle to quick release adaptor
(with alan key broach).
Part No. ht4f
Quick release to 1/8" male fittings.
Used to join compressor nozzle to end of the 1/4" male hose tale.
1/4" Male Connector
Part No. ht8m
Quick release to 1/4" nozzles (with alan key broach - for 1/4"
nozzles).
1/8" S/Steel Wear Cone
1/4" Female Connector
100/150/350mm Nozzle Ext.
Part No. pc4ss
Suit 1/8" male tail behind nozzle protecting the quick release coupler.
1/4" S/Steel Wear Cone
Part No. ht8f
Part No. ce4
Stainless steel nozzle extensions used to extend the length of
the nozzles to prevent them turning around in pipe.
Quick release to 1/4" male fittings.
1/4" Male Connector Short
Part No. pc8ss
Part No. ht8mS
1/8" Hose Tail Swage
Part No. hr4
Repair Synflex, Mustang and Armadillo water jetter hose - short.
Quick release to 1/4" female fittings.
3/16" Hose Tail Short Swage
1/4" Hose Tail Short Swage
3/8" Male Connector
Part No. ht12m
Quick release to 3/8" nozzles (with alan key broach).
Part No. hr6s
Part No. HR8
Onsite Hose Swaging Tool
Part No. st
This tool comes with the pushers and dyes for repairing both
1/4" and 3/16" jet hose. Comes with $100 of hose tails FREE!
1/4" Stubbie Tail
Part No. ht8msf
Quick release for Root Ranger only (with alan key broach).
Spitwater HP251SAE - Cold Water
Portable petrol powered unit. Good Pressure + High Volume = Quick Jetting.
key features
With 3650 psi (250 Bar) pump pressure and
21 Litres per minute pump volume this unit is
an excellent choice for portable jetting. This
multi-function site tool can be used for...
• Drain cleaning / jetting applications
• Site and vehicle clean up
• Equipment cleaning
• General cleaning and wash-down
•
•
•
•
•
•
•
Oz-tuff Belt Driven - 1450 RPM Pump
Water By-Pass when trigger is closed
3650 psi (250 Bar) Pump Pressure
4500 psi Turbo Pressure (Optional)
21 Litres per minute Pump Volume
20 HP Honda Petrol Motor
1450 RPM Industrial Machine
Hose Repair &
Reswage Service
Hire Jetting
Equipment
Mustang
Pump
Bring in your broken or
leaking jetter hose. We can
fit specific swages and
repair / reswage your hose.
We have a Mustang
Remote Mini Reel and
Mustang Nozzles Box
Kit available for hire.
Connect to jetter
and pump liquid
or debris quickly
without electricity.
Move up to 17,600 Litres per hour!
Sales & Enquiries • After Sales Servicing • Parts Supply • Equipment Hire
Address 4 Bain Street, Currajong Qld 4812
postal PO Box 653, Aitkenvale Qld 4814
phone 07) 4725 8880
•
email [email protected]
web www.airlesstownsville.com.au
phone 07) 4725 8880
facsimile 07) 4725 5977
fax 07) 4725 5977 • www.airlesstownsville.com.au
4