4BD4FH

4BD4FH
HYDRAULIC BLOCK
COUPLER
4BD4FH
HYDRAULIC BLOCK COUPLER
4BD is a block coupler designed for hydraulic
quick change and is ideal for skid steer loaders,
mini skid steer loaders, tractor backhoe
loaders and utility vehicles.
It allows changes from one attachment to
another within seconds and provides for
connection under pressure.
The 4BD has greater flow capability than
standard flat face couplers and provides for an
overall reduced pressure drop.
4BD4FH08
The Faster 4BD block coupler has been
specified by industry leaders and has been in
the market for 10 years.
The new 4BD4FH SERIES, uses high pressure
flat face couplings FFH, all conforming to ISO
16028 standard.
By using the same casting and the same
fixing points, the user can choose between a
cartridge of 1/2” and 3/4”.
4BD4FH12
The descriptions and illustrations in this brochure are for information only and are not binding
The measures are referred to a block coupler using 3/4” cartriges
Other rear adaptor threads are available on request.
TECHNICAL DATA
Nominal Body Size
Max Working Pressure
Dash
08
mm
12.5
inch
1/2”
MPa
35
12
19
3/4”
35 Flow Rate
(*)
l/min
100
145
Burst Pressures (**)
Connected
MPa
125
Male
MPa
125
Female
125
125
125
MPa
125
(*) Suggested flow rate (corresponding to 0,2 MPa pressure drop) with ISO VG32 hydraulic fluid
(**)1 MPa = 145 PSI = 10 Bar
FURTHER INFORMATION
Test Specifications:
According to ISO 7241-2 standards
Materials:
- Female in steel with carbonitrited wearing parts
- Male in high grade carbon steel induction hardened
- Standard seals in Nitrile Rubber (NBR) and Polyurethane
- Back-up ring in PTFE
- Zinc plating and CrIII passivation
Temperature Range:
From -25°C to +100°C (with standard seals)
The descriptions and illustrations in this brochure are for information only and are not binding
CAT. 0110/I Italiano
CAT. 0110/GB English
CAT. 0110/F Français
General Line
CAT. 0111-I Italiano
CAT. 0111-GB English
Multifaster Series
CAT. 0112-I Italiano
CAT. 0112-GB English
Agriculture Series
CAT. 0113-I Italiano
CAT. 0113-GB English
Flat Face series
CAT. 0114-I Italiano
CAT. 0114-GB English
Screw-on series
CAT. 0115-I Italiano
CAT. 0115-GB English
Standard Series
CAT. 0116-I Italiano
CAT. 0116-GB English
CPV-CNV and CVV Series
CAT. 0117-I Italiano
CAT. 0117-GB English
DF Series
CAT. 0118-I Italiano
CAT. 0118-GB English
RF Series
CAT. 0119-I Italiano
CAT. 0119-GB English
Check-valves Series
Representative offices:
THE WORLD OF QUICK-RELEASE COUPLINGS
CAT. 0121-English
Distribution Catalogue
France - François Divet
F-35200 Rennes - 11, Rue Jean Bras
(+33) (0) 2.99.51.44.94 - Fax (+33) (0) 2.99.51.00.13
[email protected]
Germany - Benelux - Stephan Selkes
D-45329 ESSEN - Karlstrasse, 155
(+49) (0) 201 2946510 - Fax (+49) (0) 201 2946511
[email protected]
Germany - Switzerland - Austria - Hubert Stoll
Sommerberg 15 D-89601 Schelklingen
(+49) (0) 7394 933135 - Fax (+49) (0) 7394 933136
[email protected]
Subsidiaries:
CINA - FASTER HYDRAULICS Co, Ltd.
200233 SHANGHAI, P.R. China
n° 1289, Yishan Road, Caohejing Hi-tech Park
(+86) 021-6082 3060 - Fax (+86) 021-6082 3080
[email protected]
INDIA - FASTER HYDRAULICS Pvt. Ltd.
410501 DISTRICT PUNE, MAHARASTRA, India
Plot n° 10, Gate n° 108 Ambethan, Taluka Khed
(+91) 21 356 7800
[email protected]
BRASILE - FASTER BRASIL EQUIPAMENTOS HIDRÁULICOS Ltda
SP, 12421-010 PINDAMONHANGABA, Brasil
Avenida Nossa Senhora do Soccorro, 2100, Bairro Soccorro
(+55) 12 3648 1226 - Fax (+55) 12 3648 1226
[email protected]
USA - FASTER Inc.
MAUMEE, OH 43537-9505
6560 Weatherfield, Ct.
(+1) 419-868-8197 - (+1) 800-231-2501 - Fax (+1) 419-868-8360
[email protected]
Headquarter
UNI EN ISO 9001
Cert. n° 2905
ISO/TS 16949
ITALIA - FASTER S.p.A.
I-26027 Rivolta d’Adda (CR) Italy
Via Ludovico Ariosto, 7
(+39) 0363.377211 - Fax (+39) 0363.377333
[email protected]
Brochure 4BD4FH Ed. 02/2011 - E
CAT. 0120-I Italiano
CAT. 0120-GB English
Industrial Series