Entire catalog - SEW North Filtration

Transcription

DUST FILTER COMPONENTS
Certified Header Tank
Pulse Valves
for Dust Collector Filters
Electronic control
Systems
™
TURBO
TEAM
2008
Technical Development
1
TURBO HEADER TANKS
Certified
Header Tank
ACCORDING TO 2009/105/EC AND PED 97/23/EC
2
Dust Filters Components
TURBO HEADER TANKS
RANGE
TYPES
CARBON STEEL
TANKS (Integral, TF, TL, TD, Pack Series)
TURBO TANKS
Turbo can provide a complete range of header tanks for dust collector
filters, according to 2009/105/EC and 97/23/EC PED Directives.
Our tanks feature high performance coupled with long operational
lifetime and can be tailored upon customer’s requirements.
STAINLESS STEEL
1. Steel tanks (Integral, TF, TL, TD, Pack Series)
2. Aluminium tanks (Alutank Series)
3. AISI 304&316 stainless steel tanks (Integral, TF, TL, TD Series)
A wide choice of accessories is also available including:
Blow tube, Bulkhead connector, Electrical cable assembly with Matrix system, Electropneumatic cable assembly based on Turbo-Net system.
Turbo can also supply ATEX94/9 /EC certified tanks that meet the following markings:
ATEX II 2GD (zone 1 and 21)
ATEX II 3GD(zone 2 and 22).
ALUMINIUM (Alutank Series)
All Turbo tanks are available in
ATEX version.
(You can find details of ATEX directive at the end of
catalogue).
3
TURBO HEADER TANK
TECHNICAL CHARACTERISTICS
COIL
Coil insulation
DIN connector
Protection DIN connector+Coil
Option ATEX 94/9/CE
Class H
PG 9 EN 175301-803
IP 65 EN 60529
Group II Cat. 2GD + Group II Cat. 3GD
Voltages
24V / 50-60 hz (±10%) 19VA
115V / 50-60 hz (± 10%) 19VA
230V / 50-60 hz (±-10%) 19VA
24 DC (+/- 10%) 18 Watt
VALVE CONSTRUCTION
Cover
Body
Pilot group
Screws
Diaphragm std
Viton Diaphragm
Plate Diaphragm
TANK
Fluids
Pressure
Temperature range of carbon steel
Temperature range of stainless steel
Option ATEX 94/9/CE
TANK CAPACITY
Dn 4” (114 mm)
Dn 5” (139 mm)
Dn 6” (168 mm)
Dn 8” (219 mm)
Dn 10” (273 mm)
Dn 12” (324 mm)
4
Die cast aluminium
Die cast aluminium
Stainless steel
Stainless steel
Neoprene
Viton
Stainless steel
Compressed air - Nitrogen
0,5 to 8 bar
-20°C ; + 80°C
-50°C ; + 200°C
Group II Cat. 2 GD
Group II Cat. 3 GD
9,5
13,70
20,10
34,90
53,50
76
liters/meter
liters/meter
liters/meter
liters/meter
liters/meter
liters/meter
TURBO HEADER TANKS
RANGE
TURBO PRODUCT RANGE
- Global immersion
Global immersion tanks offer superior performance thanks to the fully immersed diaphragm.
- With threaded stub pipes
Provide a solid coupling and high alignment assembly of valves. They make use of threaded pulse valves.
- With plain tube
This version makes it possible to achieve a quick and highly efficient valve assembly.
- Aluminium tanks, Alutank Series
Fully customised upon customer’s requirements, they feature light weight and easy handing. Thanks to the anodization
process, they offer considerable protection against atmospheric agents and prevent oxidation.
Besides, they ensure the availability of totally clean compressed air supply.
ATEX II 2GDC
ATEX II 3D
CE STANDARD
PED STANDARD
STAINLESS STEEL PED
ALUMINIUM
PED
3
5
TURBO HEADER TANK
GALLERY
6
CERTIFIED HEADER TANKS
According to 2009/105/EC and 97/23/EC PED
A1 GLOBAL IMMERSION
INTEGRAL Series
2009/105/EC - 97/23/EC PED
A2 THREADED STUB PIPE
TF Series
2009/105/EC - 97/23/EC PED
A3 THREADED STUB PIPE
FOR STRAIGHT TROUGHT VALVE
TL Series
2009/105/EC - 97/23/EC PED
A4 PLAIN STUB PIPE
TD Series
2009/105/EC - 97/23/EC PED
A5 STAINLESS STEEL
XTF Series
97/23/EC PED
A6 GLOBAL IMMERSION
ALUTANK Series
97/23/EC PED
A7 AIR CANNON
PACK Series
A8 BLOW TUBES
TS Series
2009/105/EC - 97/23/EC PED
7
HEADER TANKS
According to 2009/105/EC and PED 97/23/EC
HOW TO ORDER
example
TANK MODEL:
GLOBAL IMMERSION
THREADED STUB PIPE
PLAIN STUB PIPE
ALUMINIUM
=
=
=
=
INTEGRAL 6 P 25 02450 N10 P150 B G1
INTEGRAL
TF - TL
TD
ALUTANK
TANK DIAMETER
4” = 4
5” = 5
6” = 6
8” = 8
10” = 10
12” = 12
INTEGRAL PILOT = P
REMOTE PILOT = M
VALVE DIAMETER
1/2” = 10
3/4” = 20
1”
= 25
1”1/2 = 30
1”1/2 = 35
1”1/2 = 40
1”1/2 = 45
2”
= 50
2”1/2 = 65
3”
= 75
POWER SUPPLY
24V/50-60Hz =02450
115V/50-60Hz =11050
230V/50-60Hz =22050
24VDC
=024DC
N : NUMBER OF VALVES
P : PITCH
ROUND ENDS = B
FLAT ENDS = F
8
BLOW TUBE
SHORT PLAIN
LONG PLAIN
LONG THREADED
SHORT THREADED
= G1
= G2
= G3
= G4
Integral 6 P 25 02450 N10 P 150 B G1 identifies a global
immersion tank (Integral) having 6” (6) diameter, integral electrical pilot (P), 1” (25) valves with 24V 50Hz (02450) coil voltage, equipped with no. 10 valves (N10) whose pitch is 150
mm (P150).
Tank ends are round (B) and outlet stub pipes are plain (G1).
GLOBAL IMMERSION HEADER TANK
A1
INTEGRAL Series dn 4” with 1/2” valves
DESCRIPTION
VALVE SM10/SP10
1
2
3
4
5
6
7
BH10...V/50-60Hz
VTE6x18+TROND6GROWER
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
Coil + Din connector
Screws + Washers
Pole assembly
Cover direct drive
Remote operated cover
Spring
Diaphragm
4”
1/2”
9
A1
5”
INTEGRAL Series dn 5” with 3/4 ” valves
DESCRIPTION
VALVE SM20/SP20
1
2
3
4
5
6
6a
BH10...V/50-60Hz
TE6x18+TROND6GROWER
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
Screws + Washers
Pole assembly
Cover direct drive
Cover remote operated
Diaphragm
Spring
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SM = MEDIUM BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
10
G1
G2
=
=
=
=
G1
G2
G3
G4
G3
3/4 ”
G4
A1
INTEGRAL Series dn 6” with 3/4 ” valves
DESCRIPTION
VALVE SM20/SP20
1
2
3
4
5
6
6a
BH10...V/50-60Hz
TE6x18+TROND6GROWER
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
6”
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SM = MEDIUM BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
G1
G2
=
=
=
=
G1
G2
G3
G4
G3
3/4 ”
G4
11
A1
6”
INTEGRAL Series dn 6” with 1” valves
DESCRIPTION
VALVE SM25/SP25
1
2
3
4
5
6
6a
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SM = MEDIUM BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
12
G1
G2
=
=
=
=
G1
G2
G3
G4
G3
1”
G4
A1
INTEGRAL Series dn 6” with 1” 1/2 valves
DESCRIPTION
VALVE SM30/SP30
1
2
3
4
5
6
7
BH10...V/50-60Hz
GPC10
TCOP30
TCOP30FM
TMOL25GHS
M30
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SM = MEDIUM BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
G1
G2
=
=
=
=
G1
G2
G3
G4
G3
1”1/2
G4
13
A1
6”
INTEGRAL Series dn 6” with 1” 1/2 valves
DESCRIPTION
VALVE SM35/SP35
1
2
3
4
5
6
7
8
9
10
11
BH10...V/50-60Hz
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
TCOP35N
TMOL25GHS
M35
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
Screws + Washers
Cover
Spring
Diaphragm
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SM = MEDIUM BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
14
G1
G2
=
=
=
=
G1
G2
G3
G4
G3
1”1/2
G4
A1
INTEGRAL Series dn 8” with 1”valves
DESCRIPTION
VALVE SM25/SP25
1
2
3
4
5
6
6a
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
8”
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SM = MEDIUM BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
G1
G2
=
=
=
=
G3
G1
G2
G3
G4
1”
G4
15
A1
8”
INTEGRAL Series dn 8” with 1”1/2 valves
DESCRIPTION
VALVE SM35/SP35
1
2
3
4
5
6
7
8
9
10
11
BH10...V/50-60Hz
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
TCOP35N
TMOL25GHS
M35
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
Screws + Washers
Cover
Spring
Diaphragm
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SM = MEDIUM BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
1”1/2
G1
16
G2
G3
G4
A1
DESCRIPTION
VALVE SM40/SP40
1
2
3
4
5
6
6a
7
8
9
10
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP40N
TMOL40
M40
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Diaphragm
8”
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SM = MEDIUM BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
G1
G2
=
=
=
=
G3
G1
G2
G3
G4
1”1/2
G4
17
A1
8”
DESCRIPTION
VALVE SM45/SP45
1
2
3
4
5
6
7
8
9
10
11
BH10...V/50-60Hz
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
TCOP45N
TMOL40
M45
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
Screws + Washers
Cover
Spring
Diaphragm
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SM = MEDIUM BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
G1
18
G2
=
=
=
=
G3
G1
G2
G3
G4
1”1/2
G4
A1
DESCRIPTION
VALVE SM40/SP40
1
2
3
4
5
6
6a
7
8
9
10
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP40N
TMOL40
M40
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Diaphragm
10”
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
G1
G2
=
=
=
=
G1
G2
G3
G4
G3
1”1/2
G4
19
A1
10”
DESCRIPTION
VALVE SM50/SP50
1
2
3
4
5
6
6a
7
8
9
10
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP50G
TMOL40
M50
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Diaphragm
BRACKETS
CS = COLLAR
SA = HIGH BRACKET
SB = SMALL BRACKET
COLLAR
BRACKET
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
20
G1
G2
G3
=
=
=
=
G1
G2
G3
G4
2”
G4
A1
DESCRIPTION
VALVE SM65/SP65
1
2
3
4
5
6
6a
7
8
9
10
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP65G
TMOL40
M76/SERB
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Diaphragm
12”
2” 1/2
21
A1
12”
DESCRIPTION
VALVE SM75/SP75
1
2
3
4
5
6
6a
7
8
9
10
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP65G
TMOL40
M76/SERB
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Diaphragm
3”
22
Technical Development
23
A2
HEADER TANK WITH THREADED STUB PIPES
TF
TF SERIES dn 5” - 6” - 8” - 10” - 12”
Ø (Nom.) Ø (est) mm Ø E
5”
5”
6”
6”
6”
8”
8”
8”
10”
10”
10”
12”
12”
24
140
140
168,3
168,3
168,3
219,1
219,1
219,1
273
273
273
324
324
3/4”
1”
3/4”
1”
1”1/2
1”
1”1/2
2”
1”1/2
2”
21/2
2”
2”1/2
A
B(min)
ØF
50
50
50
50
50
70
70
70
90
90
90
-
45
45
45
45
55
45
55
60
55
60
70
60
65
1”
1”
1”
1”
1”
1”1/2
1”1/2
1”1/2
1”1/2
1”1/2
1”1/2
1”1/2
1”1/2
H
M
R
Z(±)
S(±)
P(min)
10
10
10
10
10
10
10
10
12
12
12
20
20
85
85
85
85
85
85
85
85
85
75
75
75
75
40
40
40
40
40
40
40
40
40
40
40
40
40
120
120
120
120
136
120
136
164
136
164
164
164
164
190
190
204
204
220
229
245
273
272
300
300
325
325
85
85
85
85
150
85
150
210
150
210
210
210
210
THREADED STUB PIPE HEADER TANK
A2
TF Series dn 5” - 6” - 8” - 10” - 12”
DESCRIPTION
VALVE FM20/FP20
VALVE FM25/FM25
1 Coil + Din connector
2 Screws + Washers
3 Pole assembly
4 Cover direct drive
5 Remote operated cover
6 Diaphragm
6a Spring
7 Body
BH10...V/50-60Hz
VTE6x20 +TROND6GROWER
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR20FFG
BH10...V/50-60Hz
VTE6x20 +TROND6GROWER
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR25FFG
DESCRIPTION
VALVE FP/FM40
VALVE FM55/FP55
VALVE FM65/FP65
1
2
3
4
5
6
6a
7
8
9
10
11
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP40N
TMOL40
M40
TCOR40FFG
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP65G
TMOL40
M55/LP
TCOR55FFG
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP65G
TMOL40
M76
TCOR65FFGP
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Main diaphragm
Body
TF
25
From
R.&D. a new pulse valve
SAVING & FLEXIBILITY
The double
advantage solution!
THE DESIGN OFFERS EASE
OF MAINTENANCE THANKS
TO HORIZONTAL POSITION
INTEGRATED COMPRESSION FITTING
CONNECTOR ELIMINATES THE NEED FOR SEPARATE
BULKHEAD CONNECTOR
26
DIRECT INSTALLATION THROUGH
THE BAG HOUSE WALL
SAME COMPONENTS THROUGH ALL
TURBO PULSE VALVES RANGE
27
A3
HEADER TANK WITH THREADED STUB PIPES
TL
28
TL Series dn 6”- 8” straight through dn1” -11/2“
Ø
Ø (est) mm
øE
A
B(min)
ØF
H
M
R
Z(±
S(±)
P(min) Mounting bracket
6”
6”
8”
168,3
168,3
219,1
1”1/4
2”
2”
50
50
70
50
60
60
1”
1”
1”1/2
10
10
10
45
45
45
30
30
30
139
180
180
223
265
290
85
120
120
S6-223
S6-265
S8-290
THREADED STUB PIPE HEADER TANK
A3
TL Series /Part List
DESCRIPTION
VALVE FDM25/FDP25
1
2
3
4
5
6
6a
7
8
9
10
11
12
BH10...V/50-60Hz
VTE6x20 + TROND6GROWER
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR25FLG
TRON80x53x5
TGBA25
GCON25
OG25
TDAL25
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Body
Gasket
Lock nut
Conical seal
Retainer ring
Compression nut
DESCRIPTION
VALVE FDM35/FDP35
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
11
12
BH10...V/50-60Hz
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
TCOP35N
TMOL25GHS
M35
TCOR35FLG
TRON100x70x5
TGBA40
GCON40
OG40
TDAL40
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
Screws + Washers
Cover
Spring
Diaphragm
Body
Gasket
Lock nut
Conical seal
Retainer ring
Compression nut
TL
29
A4
HEADER TANK WITH PLAIN STUB PIPES
TD
TD Series dn 5” - 6” - 8” - 10”
Ø (NOM)
5”
5”
6”
6”
6”
8”
8”
10”
30
Ø(est)mm
ØE
A
B(min)
ØF
140
140
168,3
168,3
168,3
219,1
219,1
273
3/4”
50
50
50
50
50
70
70
90
45
45
45
45
55
45
55
55
1”
1”
1”
1”
1”
1”1/2
1”1/2
1”1/2
1”
3/4”
1”
1”1/2
1”
1”1/2
1”1/2
H
M
Z(±)
S(±)
P(min)
10
10
10
10
10
10
10
12
85
85
85
85
85
85
85
85
130
130
130
130
138
130
138
138
200
200
215
215
223
240
248
275
85
85
85
85
150
85
150
150
HEADER TANK WITH PLAIN STUB PIPE
A4
TD Series dn 5” - 6” - 8” - 10”
DESCRIPTION
VALVE DM20/DP20
VALVE DM25/DP25
1
2
3
4
5
6
6a
7
8
9
10
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR20/25MMG
GCON20
OG20
TDAL20/25
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR25MMG
GCON25
OG25
TDAL25
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Body
Conical seal
Retainer ring
Compression nut
DESCRIPTION
VALVE DM40/DP40
1
2
3
4
5
6
6a
7
8
9
10
11
12
12
13
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP40N
TMOL40
M40
TCOR40MMG
GCON40
OG40
TDAL40
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Main diaphargm
Body
Conical seal
Retainer ring
Compression Nut
TD
31
A5
STAINLESS STEEL HEADER TANKS WITH THREADED STUB PIPES
According to PED 97/23/EC
XTF XTF Series dn 5” - 6” - 8”
Ø (nom)
Ø (est) mm
ØE
A
B (min)
ØF
H
M
R
Z (±)
S (±)
P (min)
5”
5”
5”
6”
6”
6”
6”
8”
8”
8”
8”
140
140
140
168,3
168,3
168,3
168,3
219,1
219,1
219,1
219,1
3/4”
50
50
50
50
50
50
50
70
70
70
70
40
45
50
40
45
50
60
45
55
60
65
1”
1”
1”
1”
1”
1”
1”
11/2”
11/2”
11/2”
11/2”
15
15
15
15
15
15
15
18
18
18
18
85
85
85
85
85
85
85
85
85
85
85
40
40
40
40
40
40
40
40
40
40
40
120
120
120
120
120
136
164
120
136
164
164
190
190
190
204
204
220
248
229
245
273
273
85
85
150
85
85
150
210
85
150
210
210
1”
11/2”
3/4”
1”
11/2”
2”
1”
11/2”
2”
21/2”
Temp. Range: -50°C +200°C
A5
STAINLESS STEEL GLOBAL IMMERSION HEADER TANK
XTF INTEGRAL Series dn 5” - 6” - 8”
Temp. Range: -50°C +200°C
32
MOUNTING BRACKETS
A5
RANGE
DN Tank
Type of bracket
Small bracket
5” (Ø 139,7)
Medium bracket
High bracket
Small bracket
6” (Ø 168,3)
8” (Ø 219,1)
10” (Ø 273)
Code of the bracket
A (mm)
B (mm)
H (mm)
S (mm)
SB5
264
150
95
50
SM5
264
150
160
50
SA5
264
150
180
50
SB6
292
150
109
50
Medium bracket
SM6
292
150
170
50
High bracket
SA6
292
150
200
50
Series TL bracket
S6-223
292
150
223
50
Series TL bracket
S6-265
292
150
265
50
Small bracket
SB8
348
200
134
50
Medium bracket
SM8
348
200
210
50
High bracket
SA8
348
200
270
50
Series TL bracket
S8-290
348
200
290
50
Small bracket
SB10
424
250
161
50
High bracket
SA10
424
250
273
50
33
A6
ALUMINIUM GLOBAL IMMERSION HEADER TANK
6”
ALUTANK Series with dn 1” valves
TECHNICAL CARECTERISTICS
AIR PRESSURE
B
AIR PRESSURE
B
DESCRIPTION
VALVE SQM25/SQP25
1
2
3
4
5
6
6a
7
8
9
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
VTCEI6x16
TCOR25IMO
GOR65x4
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws
Body
O-ring
•Tank
Extruded anodized aluminium
•Ends
Die cast aluminium
•Blow tube
Steel zinc plated
•O-Rings
NBR
•Temperature range
-20°C +80°C
•Operating pressure
0,5 ÷ 6 BAR - 0,5÷ 8 BAR
•Low temperature
- 40°C +80°C
Blow tubes in Aluminium
UV C P
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
G1
34
G2
=
=
=
=
G3
G1
G2
G3
G4
1”
G4
ALUMINIUM GLOBAL IMMERSION HEADER TANK
A6
Series ALUTANK with 1”1/2 valve
6”
TECHNICAL CARECTERISTICS
AIR PRESSURE
B
AIR PRESSURE
B
•Tank
Extruded anodized aluminium
•Ends
Die cast aluminium
•Blow tube
Steel zinc plated
•O-Rings
NBR
•Temperature range
-20°C +80°C
•Operating pressure
0,5 ÷ 6 BAR - 0,5 ÷ 8 BAR
•Low temperature
- 40°C +80°C
Blow tubes in Aluminium
DESCRIPTION
VALVE SQM35/SQP35
1
2
3
4
5
6
7
8
9
10
11
12
13
14
BH10...V/50-60Hz
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
TCOP35N
TMOL25GHS
M35
VTCEI8x20
TCOR35FMGS
GOR6337
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
Screws + Washers
Cover
Spring
Diaphragm
Screws
Body
O-ring
UV C P
SHORT PLAIN TUBE
LONG PLAIN TUBE
THREADED LONG TUBE
THREADED SHORT TUBE
G1
G2
=
=
=
=
G3
G1
G2
G3
G4
1”1/2
G4
35
A7
AIR CANNON
PACK
PACK Series
Type
PACK 5
PACK 15
PACK 25
PACK 50
36
A
512
868
895
1174
B
140 (ø5”)
168,3 (ø6”)
219,1 (ø8”)
273 ( ø10”)
C
100
124
160
214
E
ØF
100
100
150
185
3/4”
1”
1”1/2
2”
G
90
90
133,5
198
ØH
73
73
135
190
I
38
38
62
83
L
232
368
375
539
M
150
280
320
320
N
120
160
260
260
ØO
ØP
Q
13
13
13
13
1/2”
250
250
350
350
1/2”
1/2”
1/2”
BLOW TUBE
TS SERIES
HOW TO ORDER
A8
TS
TS 25 P100 N10 D10 L150 F200 H15 A2 T2
TS: BLOW TUBE
Ø D: BLOW TUBE DIAMETER
20
3/4”
25
1”
40
1”1/2
50
2”
P: INJECTOR PITCH
N: Q.TY OF INJECTOR
D: INJECTOR DIAMETER
L: DISTANCE BETWEEN FILTER WALL
AND INJECTOR
F: DISTANCE BETWEEN INJECTOR
TO END OF B.T.
H: INJECTOR HEIGHT
A1: PLAIN
A2: THREADED
T1: PLUG
T2: BRACKET
T1
A1
A2
T2
DESCRIPTION
1
2
3
4
5
6
Tube
Injector
O-Ring
Plug
Bracket
Screws
37
38
PULSE VALVES
Pulse
Valves
for Dust Collector Filters
39
TURBO PULSE VALVES
R&D
40
TURBO PULSE VALVES
RANGE
TURBO VALVES
Turbo has a complete range of pulse valves for dust collector filters able to meet all customers technical requirement.
Turbo valves are designed to have a long life and excellent performance in terms of opening and closing with low air
consumption.
Turbo products range includes:
1 - Threaded pulse valves (F Series)
2 - Compression fittings pulse valves (D Series)
3 - Flanged pulse valves (E Series)
4 - Pulse valves for square tank (SQ Series)
5 - Straight through pulse valves (FD Series)
Same valves are available in compliance with ATEX 94/9/EC:
ATEX II 2 GD (zone 1 and 21)
ATEX II 3 GD (zone 2 and 22).
(You can find details of ATEX directive at the end of catalogue).
41
PULSE VALVES
HOW TO ORDER
example
F
D
E
SQ
FD
:
:
:
:
:
THREADED VALVE
COMPRESSION FITTINGS VALVE
FLANGED VALVE
GLOBAL VALVE FOR SQUARE TANK
STRAIGHT THROUGH VALVE
P = INTEGRAL PILOT
M = REMOTE PILOT
CONNECTION DIAMETERS
3/4” = 20
1”
= 25
1”1/2 = 40
1”1/2 = 45
2”
= 55
2”1/2 = 65
3”
= 75
4”
= 100
STANDARD VOLTAGES
24V/50-60Hz =02450
115V/50-60Hz =11050
230V/50-60Hz =22050
24VDC
=024DC
42
F
P
25 02450
PULSE VALVES
B1 Pulse valve with threaded connection
F Series
B2 Pulse valves with compression fitting
D Series
B3 Pulse valves with flange inlet
E Series
B4 Pulse valves for square tank
SQ Series
B5 Pulse valves straight through
FD Series
43
B1
THREADED PULSE VALVE
F
F Series
CHARACTERISTICS
Fluid
Filtered and oilfree compressed air
Temperature
range
STD diaphragm -20°C; +80°C
Viton diaphragm -20°C; +200°C
Operating pressure
Body and cover
Core tube
Plunger
Screws
Coil insulation
Din’s connector
Protection Din’s connector + Coil
Standard voltage
min 0,5 bar - max 7,5 bar
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
PG 9 EN175301-803
IP65 EN60529
24V/50-60Hz (±10%) 19VA
115V/50-60Hz (±10%) 19VA
230V/50-60Hz (±10%) 19VA
24VDC (± 10%) 18 Watt
DESCRIPTION
VALVE FM20/FP20
VALVE FM25/FP25
1 Coil +Din Connector
2 Screws + Washers
3 Pole assembly
6 Diaphragm
6a Spring
7 Body
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR20FFG
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR25FFG
FP Integral solenoid pilot version / FM Remote pilot version
DESCRIPTION
VALVE FM40/FP40
VALVE FM55/FP55
VALVE FM65/FP65
1 Coil + Din Connector
2 Screws + Washers
3 Pole assembly
6 Diaphragm
6a Spring
7 Screws + Washers
8 Cover
9 Spring
10 Main diaphragm
11 Body
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP40N
TMOL40
M40
TCOR40FFG
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP65G
TMOL40
M55/LP
TCOR55FFG
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP65G
TMOL40
M76
TCOR65FFGP
44
THREADED PULSE VALVE B 1
Overall dimensions / F Series
Model
Ø L (nom)
A
B
C
D
E
Weight (Kg)
FP 20
3/ “
4
52
90
20,5
74
~125
0,6
FP 25
1“
52
90
20,5
74
1”1/2
71,3
135
31
140
~125
~188
0,5
FP 40
FP 55
2“
114
203
40
194
2”1/2
114
203
48
194
~225
~225
3,7
FP 65
FM 20
3/ “
4
52
90
20,5
74
0,4
FM 25
1“
52
90
20,5
74
~67
~67
FM 40
1”1/2
71,3
135
31
140
~130
1,4
FM 55
2“
114
203
40
194
FM 65
2”1/2
114
203
48
194
~167
~167
3,4
Note: Threads can also be implemented in NPT.
For information, please contact our technical Department.
F
1,6
3,6
0,3
3,5
45
B1
THREADED PULSE VALVE
F
F Series
CHARACTERISTICS
DESCRIPTION
VALVE FM45/FP45
1
2
3
4
5
6
7
8
9
10
11
12
BH10...V/50-60Hz
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
TCOP45N
TMOL40
M45
TCOR40FFG
Coil + Din Connector
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
Screws + Washers
Cover
Spring
Diaphragm
Body
46
Fluid
Temperature
range
Operating pressure
Body and cover
Core tube
Plunger
Screws
Coil insulation
Din’s connector
Standard voltage
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
PG 9 EN175301-803
IP65 EN60529
24V/50-60Hz (±10%) 19VA
115V/50-60Hz (±10%) 19VA
230V/50-60Hz (±10%) 19VA
24VDC (± 10%) 18 Watt
THREADED PULSE VALVE B 1
Overall dimensions / F Series
Model
Ø L (nom)
A
B
C
D
E
Weight (Kg)
FP 45
1”1/2
71,3
135
31
140
~180
1,6
FM 45
1”1/2
71,3
135
31
140
~122
1,4
F
47
B2
COMPRESSION FITTING PULSE VALVE
D
D Series
CHARACTERISTICS
Fluid
Temperature
range
Operating pressure
Body and cover
Core tube
Plunger
Screws
Coil insulation
Din’s connector
Standard voltage
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
PG 9 EN175301-803
IP65 EN60529
24V/50-60Hz (±10%) 19VA
115V/50-60Hz (±10%) 19VA
230V/50-60Hz (±10%) 19VA
24VDC (± 10%) 18 Watt
DESCRIPTION
VALVE DM20/DP20
VALVE DM25/DP25
1 Coil +Din Connector
2 Screws + Washers
3 Pole assembly
6 Diaphragm
6a Spring
7 Body
8 Conical seal
9 Retainer ring
10Compression nut
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR20/25MMG
GCON20
OG20
TDAL20/25
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR25MMG
GCON 25
OG25
TDAL25
DP Integral solenoid pilot version / DM Remote pilot version
DESCRIPTION
VALVE DM40/DP40
1
2
3
4
5
6
6a
7
8
9
10
11
12
13
14
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP40N
TMOL40
M40
TCOR40MMG
GCON40
OG40
TDAL40
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Main Diaphragm
Body
Conical seal
Retainer ring
Compression nut
48
Model
Ø L (nom)
DP 20
3/ “
4
A
DP 25
1“
DP 40
1”1/2
66
DM 20
3/ “
4
DM 25
1“
DM 40
1”1/2
66
COMPRESSION FITTING PULSE VALVE
B2
Overall dimensions / D Series
D
B
C
E
ØF
G
H
I
Weight (Kg)
48
90
128
48
74
80
1,1
90
128
~189
~189
28,5
48
35
48
74
80
1
114
180
50
66
140
101
2,5
48
90
128
~264
~131
28,5
48
74
80
1,1
48
90
128
~131
35
48
74
80
0,9
114
180
~206
50
66
140
101
2,3
49
B3
FLANGED PULSE VALVES
E
E Series
CHARACTERISTICS
Fluid
Temperature
range
Operating pressure
Body and cover
Core tube
Plunger
Screws
Coil insulation
Din’s connector
Standard voltage
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
PG 9 EN175301-803
IP65 EN60529
24V/50-60Hz (±10%) 19VA
115V/50-60Hz (±10%) 19VA
230V/50-60Hz (±10%) 19VA
24VDC (± 10%) 18 Watt
DESCRIPTION
VALVE EM25/EP25
1
2
3
4
5
6
6a
7
8
9
10
11
BH10...V/50-60Hz
GPC10
TCOP25/EM
TCOP25FM/EM
M25/EM/EP
TMOL10G
TCOR25FMG
G CON25
OG25
TDAL25
G OR55x6
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Body
Conical seal
Retainer ring
Compression nut
O-ring
EP Integral solenoid pilot version
EM Remote pilot version
DESCRIPTION
VALVE EM40/EP40
1
2
3
4
5
6
6a
7
8
9
10
11
12
13
14
15
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP40N
TMOL40
M40
TCOR40FMG
GCON40
OG40
TDAL40
G OR64,3x5,7
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Main diaphragm
Body
Conical seal
Retainer ring
Compression nut
O-ring
EP Integral solenoid pilot version
EM Remote pilot version
50
FLANGED PULSE VALVES
Overall dimensions / D Series
Model
ØC
A
B
ØD
F
G
I
L
M
N
ØE
Weight (Kg)
EP 25
1“
60
82
9
82
74
119
106
217
81
1“1/2
1
EP 40
1“1/2
72
99
11
96
140
160
115
278
96
2”
2,3
0,9
2,1
EM 25 1“
EM40
1“1/2
60
82
9
82
74
119
106
159
81
1“1/2
72
99
11
96
140
160
115
220
96
2”
B3
E
51
B4
GLOBAL PULSE VALVES FOR SQUARE TANK
SQ
SQ Series - Ø 1”
CHARACTERISTICS
Fluid
Temperature
range
Operating pressure
Body and cover
Core tube
Plunger
Screws
Coil insulation
Din’s connector
Standard voltage
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
PG 9 EN175301-803
IP65 EN60529
24V/50-60Hz (±10%) 19VA
115V/50-60Hz (±10%) 19VA
230V/50-60Hz (±10%) 19VA
24VDC (± 10%) 18 Watt
DESCRIPTION
VALVE SQM25/SQP25
DESCRIPTION
VALVE SQMO25/SQPO25
1
2
3
4
5
6
6a
7
8
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR25IM
G OR65x4
1
2
3
4
5
6
6a
7
8
9
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
VTCEI6x16
TCOR25IMO
G OR65x4
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Body
O-ring
SQP Integral solenoid pilot version / SQM Remote pilot version
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws
Body
O-ring
SQPO Integral solenoid pilot version / SQMO Remote pilot version
52
B4
Overall dimensions / SQ Series
SQ
Model
ØA
ØB
ØC
ØD
ØE
ØM
F
G
H
I
L
Weight (Kg)
SQPO 25
1“
41,4
62,2
104
116
92
25
31,5
20,2
136
6,2
0,7
SQP 25
1“
41,4
62,2
104
116
92
25
31,5
20,2
136
6,2
0,7
SQMO 25
1“
41,4
62,2
104
116
92
25
31,5
20,2
78
6,2
0,5
SQM 25
1“
41,4
62,2
104
116
92
25
31,5
20,2
78
6,2
0,5
53
B4
SQ
SQ Series - Ø 1” 1/2
CHARACTERISTICS
Temperature
range
Operating pressure
Body and cover
Core tube
Plunger
Screws
Coil insulation
Din’s connector
Standard voltage
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
PG 9 EN175301-803
IP65 EN60529
24V/50-60Hz (±10%) 19VA
115V/50-60Hz (±10%) 19VA
230V/50-60Hz (±10%) 19VA
24VDC (± 10%) 18 Watt
DESCRIPTION
VALVE SQM35/SQP35
DESCRIPTION
VALVE SQO35/SQPO35
1
2
3
4
5
6
7
8
9
10
11
12
13
BH10...V/50-60Hz
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
TCOP35N
TMOL25GHS
M35
TCOR35FMG
G OR6337
1
2
3
4
5
6
7
8
9
10
11
12
13
14
BH10...V/50-60Hz
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
TCOP35N
TMOL25GHS
M35
VTCEI8x20
TCOR35FMGS
G OR6337
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
Screws + Washers
Cover
Spring
Diaphragm
Body
O-ring
SQP Integral solenoid pilot version
SQM Remote pilot version
54
Fluid
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
Screws + Washers
Cover
Spring
Diaphragm
Screws
Body
O-ring
SQPO Integral solenoid pilot version
SQMO Remote pilot version
Overall dimensions / SQ Series - Ø1” 1/2
Model
ØA
ØB
ØC
ØD
ØE
F
G
H
M
Weight (Kg)
SQP 35
1”1/2
1”1/2
1”1/2
1”1/2
57
80,5
114
9
42
26
162
130
1,6
57
80,5
114
9
42
26
162
130
1,6
57
80,5
114
9
42
26
104
130
1,4
57
80,5
114
9
42
26
104
130
1,4
SQPO 25
SQM 35
SQMO 35
B4
SQ
55
B4
SQ
SQ Series - Ø 2” - 2”1/2 - 3”- 4”
CHARACTERISTICS
Fluid
Temperature
range
Operating pressure
Body and cover
Core tube
Plunger
Screws
Coil insulation
Din’s connector
Standard voltage
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
PG 9 EN175301-803
IP65 EN60529
24V/50-60Hz (±10%) 19VA
115V/50-60Hz (±10%) 19VA
230V/50-60Hz (±10%) 19VA
24VDC (± 10%) 18 Watt
DESCRIPTION
VALVE SQM50/SQP50
DESCRIPTION
VALVE SQM65IN/SQP65IN
1
2
3
4
5
6
6a
7
8
9
10
11
12
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP50G
TMOL40
M50
TCOR50FG
G OR133,35x5,3
1
2
3
4
5
6
6a
7
8
9
10
11
12
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP65G
TMOL40
M55/LP
TCOR65FLQ
G OR177,17x6,99
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Diaphragm
Body
O-ring
DESCRIPTION
DESCRIPTION
1
2
3
4
5
6
6a
7
8
9
10
11
12
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOP65G
TMOL40
M76
TCOR75FLQ
G OR177,17x6,99
1
2
3
4
5
6
6a
7
8
9
10
11
12
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25/BW
TMOL10G
TCOP65G
TMOL40
M76
TCOR100FLQ
G OR177,17x6,99
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Diaphragm
Body
O-ring
56
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Diaphragm
Body
O-ring
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Screws + Washers
Cover
Spring
Diaphragm
Body
O-ring
Overall dimensions / SQ Series - Ø 2” -2” 1/2 - 3”- 4”
Model
ØA
ØB
ØC
ØD
ØE
F
G
H
I
L
Weight (Kg)
SQP 50
2“
83
126
175
195
39
60
20
211
11
2,4
SQP 65IN
2”1/2 107,5 161
225
247
44
35,5
27
205
11
3,9
SQP 75IN
3“
107,5 161
225
247
50
35,5
27
205
11
3,7
SQP 100IN 4“
119,5 161
225
247
44
35,5
27
205
11
3,8
SQM 50
2“
83
126
175
195
39
60
20
153
11
2,2
SQM 65IN
2”1/2 107,5 161
225
247
44
35,5
27
147
11
3,7
SQM 75IN
3“
107,5 161
225
247
50
35,5
27
147
11
3,5
SQM 100IN 4“
119,5 161
225
247
44
35,5
27
148
11
3,6
B4
SQ
57
B5
STRAIGHT THROUGH PULSE VALVE
FD FD Series Ø1”
CHARACTERISTICS
DESCRIPTION
VALVE FDM25/FDP25
1
2
3
4
5
6
6a
7
8
9
10
11
12
BH10...V/50-60Hz
GPC10
TCOP25
TCOP25FM
M25
TMOL10G
TCOR25FLG
TRON80x53x5
TGBA25
G CON25
OG25
TDAL25
Screws + Washers
Pole assembly
Cover direct drive
Diaphragm
Spring
Body
Gasket
Lock nut
Conical seal
Retainer ring
Compression Nut
FDP Integral solenoid pilot version
FDM Remote pilot version
58
Fluid
Temperature
range
Operating pressure
Body and cover
Core tube
Plunger
Screws
Coil insulation
Din’s connector
Standard voltage
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
PG 9 EN175301-803
IP65 EN60529
24V/50-60Hz (±10%) 19VA
115V/50-60Hz (±10%) 19VA
230V/50-60Hz (±10%) 19VA
24VDC (± 10%) 18 Watt
Overall dimensions / FD Series - Ø1”
Model
ØA
ØB
ØC
ØD
ØE
F
G
H
Weight (Kg)
FDP25
1”1/4
1”
114
172
27
74
132
49,5
1,2
FDM25
1”1/4
1”
114
172
27
74
74
49,5
1
B5
FD
59
B5
STRAIGHT THROUGH PULSE VALVE
FD FD Series Ø1”
1/2
CHARACTERISTICS
DESCRIPTION
VALVE FDM35/FDP35
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
BH10...V/50-60Hz
GPC10
TCOP10
TCOP10FM
TMOL10G
M10
TCOP35N
TMOL25GHS
M35
TCOR35FLG
TRON100x70x5
TGBA40
G CON40
OG40
TDAL40
Screws + Washers
Pole assembly
Cover direct drive
Spring
Diaphragm
Screws + Washers
Cover
Spring
Diaphragm
Body
Gasket
Lock nut
Conical seal
Retainer ring
Compression Nut
FDP Integral solenoid pilot version
FDM Remote pilot version
60
Fluid
Temperature
range
Operating pressure
Body and cover
Core tube
Plunger
Screws
Coil insulation
Din’s connector
Standard voltage
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
PG 9 EN175301-803
IP65 EN60529
24V/50-60Hz (±10%) 19VA
115V/50-60Hz (±10%) 19VA
230V/50-60Hz (±10%) 19VA
24VDC (± 10%) 18 Watt
B5
Overall dimensions / FD Series - Ø1” 1/2
FD
Model
ØA
ØB
D
E
F
G
H
Weight (Kg)
FDP35
2”
1”1/2 155
228
32
115
186
67,5
2,3
2”
1”1/2
228
32
115
131
67,5
2,1
FDM35
C
155
61
62
BULKHEAD CONNECTORS
C1
Bulkhead connector
PS/PD Series
C2
Wrench
SG/SD Series
63
C1
PS/PD
BULKHEAD CONNECTORS
PS/PD Series
P Series Bulkhead connectors provide a simple and economic
solution to installation by eliminating the need for welding or
threaded pipe connections.
∑ • PD Series
is a double ended connector for two-piece blow tube
• PS Series
is a single ended connector for one-piece blow tube
∑
64
DESCRIPTION
PS20
PS25
PS40
PS50
1
2
3
4
5
6
TDAL20/25
OG20
G CON20
TGBA25
TFIBRA70x54x1,5
TPAS20/LAV
TDAL25
OG25
G CON25
TGBA25
TFIBRA70x54x1,5
TPAS25/LAV
TDAL40
OG40
G CON40
TGBA40
TFIBRA90x70x1,5
TPAS40/LAV
TDAL50
OG50
G CON50
TGBA50
TRON115x88x5
TPASS50/LAV
Compression nut
Retainer ring
Conical seal
Lock nut
Gasket
Body
DESCRIPTION
PD20
PD25
PD40
PD50
1
2
3
4
5
6
TDAL20/25
OG20
G CON20
TGBA25
TFIBRA70x54x1,5
TPAS20
TDAL25
OG25
G CON25
TGBA25
TFIBRA70x54x1,5
TPAS25
TDAL40
OG40
G CON40
TGBA40
TFIBRA90x70x1,5
TPAS40
TDAL50
OG50
G CON50
TGBA50
TRON11x88x5
TPASS50
Compression nut
Retainer ring
Conical seal
Lock nut
Gasket
Body
BULKHEAD CONNECTORS
C1
Overall dimensions / PS/PD Series
PS/PD
Model
ØA
B
C1
D
E
F
Weight (Kg)
PS 20
PS 25
PS 40
PS 50
3/ ”
4
10,5
10,5
15
15,5
12,5
12,5
16,5
29
67
67
92
98
35
35
40
42
56
56
79
83
0,5
0,4
0,8
1,6
1”
1” 1/2
2”
Model
ØA
B
B1
C
D
E
F
Weight (Kg)
PD 20
PD 25
PD 40
PD 50
3/ ”
4
10,5
10,5
15
15,5
12,5
12,5
16,5
29
35
35
40
42
105
105
140
150
50
50
67
-
39
39
55
-
0,7
0,6
1,2
2,2
1”
1” 1/2
2”
Body, lock nut, compression nut
Die cast aluminium
Seal
NBR
Silicon
3/4”
1”
1” 1/2
2”
ASSEMBLY HOLE
-30°C / +100°C
-60°C / +200°C
Wall hole ø min. 56
65
C2
SG/SD
WRENCH
SG/SD Series
WRENCH SD FOR COMPRESSION NUT
66
WRENCH SG FOR LOCK NUT
Model
Ø
A
H
L
Model
Ø
A
H
L
SD20
SD25
SD40
SD50
3/4”
61
61
82
110
70
70
85
100
350
350
430
430
SG20
SG25
SG40
SG50
3/4”
70
70
90
120
65
65
85
100
350
350
430
430
1”
1”1/2
2”
1”
1”1/2
2”
REMOTE SOLENOID ENCLOSURES
Remote Solenoid Enclosures
D1
RCP Series
D2
RLD Series
D3
TRCP Series
67
D
D
HOW THE ORDER
REMOTE SOLENOID ENCLOSURES ACCORDING TO
ATEX
IP66
II 3D T100°C
NEMA 4 UL50
Turbo offer a range of pilot valve boxes for outdoor applications and hazardous locations.
Model available:
∑ • RCP maximum lenght of pilot tubes 3m
∑ • RLD maximum lenght of pilot tubes 10m
Tubes 6 or 8 mm should be used for pneumatic connections to the pulse valves.
Remote solenoid enclosures RCP and RLD are supplied with pre-wired electric common terminals.
TRCP remote solenoid enclosures have all coils electrical complete cabled on the printed circuit inside the enclosure.
Thermostat with heater is reccomemded to prevent moisture or freezing inside of remote solenoid enclosures.
This system ensures a minimum temperature of 5°C inside the enclosure.
example
RCP :
RLD :
TRCP :
RCP
5
V/...
R
PILOT VALVE BOX IP 66
NUMBER OF PILOT VALVES
RCP 1-2-3-4-5
(Enclosure small)
RCP 6-7-8
(Enclosure medium)
RCP 9-10-11-12
(Enclosure large)
TRCP 1-2-3-4-5-6-7-8 (Enclosure medium)
VOLTAGE
24V/50-60Hz =02450
115V/50-60Hz =11050
230V/50-60Hz =22050
24VDC
=024DC
(TRCP = 024DC - 5W)
Heating thermostat (option)
Power 70W for RCP5
Power 120W for RCP8 and RCP12
Code RCP5V/...R is for a remote solenoid
enclosures IP 66 (RCP) with five pilots
mounted electrical (5), power supply 24V
50Hz (V/...), with heating thermostat (R).
68
SAMPLE INSTALLATION
RCP
D1
RCP Series
RCP
CHARACTERISTICS
Fluid
Operating pressure
Temperature range
W/Heating
Base and cover
Core tube
Plunger
Screws
Coil insulation
Protection
Standard voltages
-20°C +80°C
-40°C +80°C
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
IP66
230 -110 - 24V
50-60VHz 19 VA
24VDC 15W
(*) Minimum distance to allow the opening of the cover
RCP5
RCP8
RCP12
Model
A
B
C
D
E
ØM
ØN
Weight (Kg)
RCP5
210
98
10
156
100
11
1,7
RCP8
333
98
10
267
100
RCP12
306
97
10
237
152
1/ “
8
1/ “
8
1/ “
8
11
3,2
11
4,4
69
D2
RLD RLD Series
CHARACTERISTICS
Fluid
Operating pressure
Temperature range
W/Heating
Base and cover
Core tube
Plunger
Screws
Coil insulation
Protection
Standard voltages
-20°C +80°C
-40°C +80°C
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
IP66
230 -110 - 24V
50-60VHz 19 VA
24VDC 15W
RLD5
RLD8
RLD12
70
Model
A
B
C
D
E
ØM
ØN
Weight (Kg)
RLD5
210
98
10
156
100
11
1,7
RLD8
333
98
10
267
100
11
3,2
RLD12
306
97
10
237
152
1/ “
8
1/ “
8
1/ “
8
11
4,4
D3
TRCP Series
TRCP
CHARACTERISTICS
Fluid
Operating pressure
Temperature range
Base and cover
Core tube
Plunger
Screws
Coil insulation
Protection
Standard voltages
-20°C +80°C
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
IP66
24VDC (5W)
Model
TRCP8
A
333
B
136,5
C
10
D
267
E
ØM
ØN
Weight (Kg)
100
1/ “
8
11
3,3
71
72
REMOTE PILOTS
Remote Pilots
E1
SR Series
TSRM Series
E2
LD Series
73
E
REMOTE PILOTS
HOW TO ORDER
REMOTE PILOT VALVE
Designed for panel mounting or Turbo boxes. Two models are available:
∑ • Series SR/TSRM, max. lenght of pilot tubes 3m
∑ • Series LD, max. lenght of pilot tubes 10m
Two ways normally closed. Tubes 6 or 8 mm. diameter should be used for pneumatic connections to the pulse valves.
example
SRC :
SRM :
TSRM:
LDC :
LDM :
SRM
02450
PILOT VALVE WITH CONNECTOR
PILOT VALVE SCREWS TERMINAL
PILOT VALVE WITH FASTON CONNECTION
PILOT VALVE WITH CONNECTOR
PILOT VALVE SCREWS TERMINAL
VOLTAGE
24V/50-60Hz =02450
115V/50-60Hz =11050
230V/50-60Hz =22050
24VDC
=024DC
(TSRM = 024DC - 5W9)
Code SRM02450 is for pilot valve with screws terminal (SRM) power supply 24V 50Hz (02450).
74
REMOTE PILOTS
E1
SR/TSRM Series
SR/TSRM
CHARACTERISTICS
Fluid
Operating pressure
Temperature range
Body
Core tube
Plunger
Coil insulation
Connector
Standard voltages
-20°C +80°C
Brass
Stainless steel
Stainless steel
Class H
PG9 / IP 65
230 -110 - 24V/50-60VHz (19 VA)
24VDC (15W) - 24VDC (5W)
SRC - IP65
24V DC
15WATT
Available with ATEX coil zone 21 and zone 22
SRM - IP00
24V DC
15WATT
SAMPLE INSTALLATION
3 mt a
mx
75
E1
REMOTE PILOTS
SR/TSRM SR/TSRM Series
SRC
SRM
Description
SRC
Description
SRM
1
2
3
4
PCRP
TGHIERA 18x1 + G OR3081
GPC10
BH10
1
2
3
4
PCRP
GPC10/R
BH10.../.. - A9
Body
Lock nut +O-ring
Pole assembly
Body
Lock nut +O-ring
Pole assembly
Coil
TSRM
76
Description
TSRM
1
2
3
4
5
PCRP
GPC10/R
BH10 024/DC/5W - A9
Body
Lock nut +O-ring
Pole assembly
Coil
Quick fitting for
rilsan tube 6x4
TGOMINNRAP
REMOTE PILOTS
E2
Remote pilots for long distance/LD Series
LD
CHARACTERISTICS
Fluid
Operating pressure
Temperature range
Body
Core tube
Plunger
Coil insulation
Connector
Standard voltages
-20°C +80°C
Brass
Stainless steel
Stainless steel
Class H
PG9 / IP 65
230 -110 - 24V/50-60VHz (19 VA)
24VDC (15W)
LDC
C
24V DC
15WATT
Available with ATEX coil zone 21 and zone 22
LDM
C
24V DC
15WATT
SAMPLE INSTALLATION
10 mt ax
m
77
E2 REMOTE PILOTS
LD Remote pilots for long distance/LD Series
LDC
DESCRIPTION
LDC
1
2
3
4
PCRPLD
TGHIERA18x1+G OR3081
GPC10
BH10.../..
Body
Lock nut + O-ring
Pole assembly
DESCRIPTION
LDM
1
2
3
4
PCRPLD
TGHIERA18x1+G OR3081
GPC10/R
BH10.../.. - A9
Body
Lock nut + O-ring
Pole assembly
Coil
LDM
78
ATEX PULSE VALVES
ATEX
Turbo pulse valves for potentially explosive
atmospheres according to ATEX 94/9/EC
valve is provided with molded coil and connector IP 65.
Valve dimensions are same of standard
model.
ATEX II3GD (zone 2 and 22)
Turbo pulse valves for potentially explosive atmospheres
according to ATEX 94/9/EC.
Valve use encapsulated molded coil with leads wire of different lenght.
Pilot valve has brass body that change valve dimensions
from standard model.
ATEX II2GD (zone 1 and 21)
79
94-9-CE ATEX DIRECTIVE
ATEX
The European Community 94/9/EC Directive establishes the constructional and functional requirements
(mandatory since 01/07/2003) for equipment and protection systems intended for use in potentially explosive atmosphere.
The Directive considers explosion hazard due to each source of ignition (electrical and not electrical), and the
main important aspects introduced are:
- Essential Health and Safety Requirements (Annex II-ESR)
- Applicability both to materials used for underground mining (group I) and for those used in surface (Group II)
- Classification of equipment in “categories” according to required protection level
- Production surveillance based on Quality Management Systems
Directive 94/9/EC considers for the first time the explosion hazard due to a non-electrical source of ignition,
such as mechanical sparks caused by vibrations or impact, high surface temperature of mechanical and electrical components caused by non-electrical sources such as vibrations, high rotating speed, etc.
Furthermore the Directive establishes to carefully evaluate the environment of installation of the equipment, its
storage and functioning, in order to classify it according to a possible presence of explosive atmosphere.
The Directive, in fact, through the Essential Health and Safety Requirements considers that equipment themselves can be a source of explosive atmosphere and provides for requirements in order to prevent such risks (Annex
II point 1.0.1.)
Aim of the European Directive. Directive 94/9/EC (ATEX) was adopted by the European Community to ensure
free movement of products intended for use in potentially explosive atmospheres. It provides for harmonized technical requirements and applicable standards.
This Directive aims to preserve people’s health and goods from risks coming from the use of equipment and protection systems in a "potentially explosive atmosphere.
Explosive atmosphere is a mixture with air, under specific atmospheric conditions (temperature from -20°C to
+40°C and pressure from 0,8 bar to 1,1 bar according to EN60079 and EN13463-1), of flammable substances
in the form of gases, vapors, mists or dusts in which, after ignition has occurred, combustion spreads to the entire
unburned mixture (see also Directive 94/9/EC Cap. I art. 1)
Potentially explosive atmosphere is an atmosphere that could become explosive due to local operating conditions
Hazardous explosive areas according to Directive 1992/92/CE. Areas where hazardous explosive atmospheres may occur are classified into zones based on their likelihood and persistence.
Zone 0
Area in which an hazardous explosive atmosphere consisting of a mixture with air of dangerous substances in
the form of gas, vapor or mist is present continuously or for long periods or frequently.
Zone 1
the form of gas, vapor or mist is likely to occur in normal operation occasionally
Zone 2
the form of gas, vapor or mist is not likely to occur in normal operation but, if it does occur, will persist for a
short period only.
80
NOTE
ELECTRONIC SYSTEMS
PRODUCT OVERVIEW
LA
ATEX CERTIFIED
(zone 1,2,21 & 22)
SEQUENCERS
ECONOMISERS
EMISSION
MONITORING
SYSTEMS AND
TRIBO-CHECK
PROBES
CONTROL UNITS WITH
REMOTE PILOTS
MATRIX
WIRING SYSTEM
TURBONET
BUS SYSTEM
82
ELECTRONIC SYSTEMS
Electronic control
Systems
DUST FILTER COMPONETS
83
ECONOMISERS AND SEQUENCERS
HOW TO ORDER
ECONOMISER E SERIES
example
E 16
M
B
E 4 - 8 - 12 -16
NUMBER OF OUTPUTS
U=24Vcc B=24V 50-60Hz L=115V 50-60Hz
M=230V 50-60Hz
STANDARD MULTIPLE SUPPLY VOLTAGE
U=24Vcc B=24V 50-60Hz L=115V 50-60Hz
M=230V 50-60Hz
MULTIPLE OUTPUT VOLTAGE
ECONOMISER BA SERIES
example
E16 MB is a 16-way E economiser
with 230 VAC supply voltage and 24VAC output voltage
BA 16
M
B
BA 4 - 8 - 12 -16
NUMBER OF OUTPUTS
M=230V 50-60Hz L=115V 50-60 Hz
STANDARD SUPPLY VOLTAGE
U=24Vcc B=24V 50-60Hz
OPTIONAL SUPPLY VOLTAGE
U=24Vcc B=24V 50-60HZ L=115V 50-60HZ
M=230V 50-60Hz
BA16 MB is a 16-way BA economiser
SEQUENCER S SERIES
example
S 16
M
B
S 4 - 8 - 12 -16
NUMBER OF OUTPUTS
U=24Vcc B=24V 50-60Hz L=115V 50-60Hz
M=230V 50-60Hz
STANDARD MULTIPLE SUPPLY VOLTAGE
U=24Vcc B=24V 50-60HZ L=115V 50-60HZ
M=230V 50-60Hz
S16 MB is a 16-way S sequencer
SEQUENCER PA SERIES
example
PA 16
M
B
PA 4 - 8 - 12 -16
NUMBER OF OUTPUTS
M=230V 50-60Hz L=115V 50-60Hz
STANDARD SUPPLY VOLTAGE
U=24Vcc B=24V 50-60Hz
OPTIONAL SUPPLY VOLTAGE
U=24Vcc B=24V 50-60HZ L=115V 50-60HZ
M=230V 50-60HZ
)%
PA16MB is a16-way sequencer
PRODUCT INDEX
Economiser with digital
∆P control
E
Series
Economiser with digital
∆P control
BA
Series
Cyclic sequencer
S
Series
Cyclic sequencer
PA
Series
Digital ∆P controller
BP B Series
Electronic single timer
TCONTEMP
TURBONET
Bus system
TURBO-NET 144
MATRIX
Wiring system
MTX
Dust emission probe
TC
Dust emission probe controller
DTC Series
Series
)&
ECONOMISER FOR DEDUSTING PLANTS
WITH DIGITAL ∆P CONTROL BY INTERNAL TRANSDUCER
E
E Series
Description
The control instruments “E” series economizer are among the most modern
and complete available today on the
market.
They have been built to command
membrane solenoids on dust removal
filters. A large back lighted liquid
crystal display clearly shows the filter
and the cleaning system status. It has
a fast-flow setting menu with intuitive operation that allows the operator
to choose one of five different languages offered, and to select from
four different pressure-reading scales
(mbar, kpa “H2O and mmH2O). The clogging level can be seen on a numerical
and/or graphic scale. The pre-coating
deactivation function, the recognition
of the valves connected and the postwashing function are all completely automatic.
What makes this “E” Series totally innovative is the software installed in the
powerful microprocessor, which directs
the full-automatic operation. This mode
makes the instrument completely autonomous and independent in the management of the filter washing, modulating the pause and shooting time
depending on the clogging level. The
”cleaning”, then, is increased or reduced automatically depending on the real
needs; this optimizes the economy of
the entire system.
)'
DEVICE PERFORMANCES
LCD Display with backlight and friendly menus in six languages
Three modes of operation: manual, auto and full-auto mode to smart filter management
Operating time in seconds and minutes with selectable range for any applications
Four units selectable for differential pressure measures
No selection jumpers required for the output voltages of the valves that is done
automatically according to the positioning of the common of pulse valves in the
terminal
Multi-selectable power supply thought just one jumper located in the terminals
compartment
Post-cleaning function with selectable number of cycles up to 255 cycles
Hours counter and pulses counter
Up two programmable alarm relays
Minimum differential pressure
Maximum differential pressure
Maximum current pulse valves dissipation
Pulse Valves not working alarm
Power down
External input to start/stop cleaning from remote
External input to start/stop cleaning from air tank sensor
Automatic precoating functions
4-20mA output to remote dP pressure
Zero crossing switching pulse valve
Pulse valves manual activation
Selection of pulse-jet cleaning systems or rotating nozzle with self-selection of optimal parameters
Protection from current overload for device and pulse valves
E Series
E
CONNECTION LAYOUT
VALVES
Terminal
1 EV1
2 EV2
3 EV3
4 EV4
5 EV5
6 EV6
7 EV7
8 EV8
signal
Solenoid valve 1
Solenoid valve 2
Solenoid valve 3
Solenoid valve 4
Solenoid valve 5
Solenoid valve 6
Solenoid valve 7
Solenoid valve 8
Terminal
9 EV9
10 EV10
11 EV11
12 EV12
13 EV13
14 EV14
15 EV15
16 EV16
signal
Solenoid valve 9
Solenoid valve 10
Solenoid valve 11
Solenoid valve 12
Solenoid valve 13
Solenoid valve 14
Solenoid valve 15
Solenoid valve 16
POWER
Power Supply 230-115-24/50hz
Terminal 30 L phase
Terminal 33 N Neutral
Terminal 31 PE Ground
Power Supply 24 VDC
Terminal 32 DC +
Terminal 25 GND Negative
Terminal 31 PE ground
(internally connect to 25)
The common of solenoid valves must be connected to the type of pilot according
to the following table:
Terminal
17
18
19
20
LEGEND
230V
115V
24DC
24AC
Voltages
230VAC 50Hz
115VAC 50Hz
24VDC
24VAC 50Hz
NOTE: THE TERMINAL 31 IS THE GROUND OF DEVICE AND PULSE VALVES
ELECTRICAL CHARACTERISTICS
Power
Timing
230VAC ±10% 50 Hz
115VAC ±10% 50 Hz
24VAC ±10% 50 Hz
24VDC ±10%
Output
24VAC (MAX 20VA @ Ton Max 5s)
24VDC (MAX 20W@ Ton Max 5s)
230VAC (MAX 20VA@ Ton=10s)
Fuses
1 x 2 Ampere
Working temperature
-15°C÷50°C
Storage temperature
-20°C÷60°C
Pause time
5 s ÷ 50 min
Working time (air pulse)
50 ms ÷ 10 s (step 10 ms)
Differential pressure Meter
Range: 0 ÷ 10 KPa
Maximum differential pressure:
50 kPa – 0.5 bar
CE DIRECTIVES
This product is compliant with the following directives:
Machine Directive 2006/42/EC
‘Electromagnetic compatibility’ related to
the European Standard EN61000-6-2:2005
class B of the rule EN61000-6-4:2001. Low
Voltage Directive 2006/95/CE related to
the European Standard EN60947-1:2004
)(
BA
BA4 /BA8 / BA12 /BA16 Series - Multiple output voltage
Up to 144 outputs available upon request with different enclosures
DESCRIPTION
Economiser for dedusting plant cleaning cycle with digital ∆P
control.
Microprocessor-operated device with electrical zero connected to
ground which ensures high immunity to external interference and low field emissions.
Max 1 output relay. Max 2 volt free digital inputs.
BA4
BA8
BA12
BA16
to control
to control
to control
to control
4 solenoid valves
8 solenoid valves
12 solenoid valves
16 solenoid valves
Standard supply voltage
Supply voltage available
upon request
Output voltage
Working temperature range
Absorbed power
Protection level
Max no. of outputs
Dimensions
Material
230 VAC / 115 VAC
24 VAC / 24 VDC
230/115 / 24VAC - 24VDC
-10°C ÷ +50°C
10 VA (Stand by)
IP65
16
140x230x95 (BA4 - BA16)
ABS / RAL 7035
STANDARD FEATURES
Connect by rylsan tube 4/6
))
Manual selection of output number / solenoid valve
Adjustable activation time per each output from 0.05 to 5 sec.
Adjustable interval time between two activations from 1 to 999 sec.
Short circuit output protection
Manual activation of each single output
Digital differential pressure control
Differential pressure reading by internal transducer (max 10kPa)
Maximum dP alarm with alarmed contact open and automatic reset
Zero dP reading adjustment
10kPa dP reading full range
Additional post-cleaning cycle after fan stop
Cleaning cycle ON/OFF by volt free external contact
Max 25W load power per each output
Input and output selection by JP1, JP2 and JP3 jumpers on the board
BA4 /BA8 / BA12 /BA16 Series - Multiple output voltage
BA
WIRING DIAGRAM
K1
5A/250V
FUSE
(See Table 1)
D1a
GROUND
COMMON
OUTPUT No.
D6
SUPPLY VOLTAGE
CUMULATIVE FAULT/ ALARM RELAY
Contact close with supply voltage ON and no alarm
FAN FAN SWITCH
(Contact close = fan ON)
NOTE D1a: put a wire at the clamps if not used with digital input enabled
CLEANING CYCLE ON/OFF BY D6 EXTERNAL CONTACT
(Contact close = cycle active)
NOTE D6: put a wire at the clamps if not used with digital input enabled
-P2 dP filter clean side
+P1 dP filter dirty side
EV1
EV3
EV2
EV5
EV4
EV7
EV6
EV9
EV7
EV11
EV10
EV13
EV12
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
10kPa
max.
3
14
15
12
13
1
2
3
4
5
dP
BA
EV15
EV14
EV16
SOLENOID VALVE VOLTAGE (see the label on the device)
Absorbed power
10 VA (Stand-by) + power EV.
Terminal
2,5 mm 250 VAC/12A
Working
temperature
range
-10°C ÷ +50°C
NOTE DC: With 24VDC supply voltage, the available output voltage decreases by 2V for internal timer voltage drop. Check the compatibility with the solenoid valves used.
Do no connect any supply voltage pole to ground with 24VDC supply voltage.
PARAMETER SETTING IN SET MODE
In Run Mode press key C to enter the function menu
F01
F02
F03
F04
F05
F06
F07
F08
F09
F10
F11
F12
F13
Digital input use
Pulse time
Time interval between events
Number of outputs
Cycles after fan stop
Manual activation
∆P control
Output voltage
Zero ∆P adjustment
∆P threshold for cycle STOP
∆P threshold for cycle START
Max ∆P alarm threshold
Fan mode selection
Key A = Access to the selected function
Key B = Exit from Set Up
Key C = Function selection
0 = included 1 = excluded
0,05 ÷ 5,00 sec
1 ÷ 999 sec (see B3x)
0 ÷ 16
0 ÷ 99
C = Selection A = Output activation
0 = excluded
1 = includedo
24V, 115V, 230V (see HV)
0,00 (see C8)
0,01 ÷ 9,99 kPa
0,01 ÷ 9,99 kPa
0,01 ÷ 9,99 kPa
0 = by contact 1= by ∆P reading
Key A = Parameter decrement in
Key B = Return to function menu
Key C = Parameter increase in Set
NOTE
The device will automatically switch from
Set Mode to Run Mode if no key is pressed for 5 minutes
ALARM DESCRIPTION
3,00/H = Maximum ∆P alarm
(Blinking display)
example: E1/05 = 05 output overload
(Blinking display)
OPERATION
CE DIRECTIVES
When power is supplied, the cleaning cycle starts if all the conditions required
for operation are present
OFF
-0‘P’
A01
...
--E
Cycle stopped due to cleaning consent missing (D6 open)
Cycle stopped due to fan OFF
Cycle stopped due to low dP (Blinking display)
No. of activated EV
Cycles active after fan stop (Blinking points)
Bar indicating pause time flow between events
∆P reading over 9.99kPa
Key B
Key C
Alarm Reset
Access to Set Up
Voltage Directive 2006/95/CE related to the
European Standard EN60947-1:2004.
)*
SEQUENCER FOR DEDUSTING PLANTS
S
S Series
Description
These control instruments series “S”
are among the most modern and complete available today on the market.
They have been built to command
membrane solenoids on dust removal
filters. A large back lighted liquid
crystal display clearly shows cleaning
system status. It has a fast-flow setting
menu with intuitive operation that
allows the operator to choose one of
six different languages offered. The
recognition of the valves connected
and the post-washing function are all
automatic.
What makes this “S” Series totally innovative is the software installed in the
powerful microprocessor, which directs
the full-automatic operation.
DEVICE PERFORMANCES
LCD Display with backlight and friendly menu in six languages
Operating time in seconds and minutes with selectable range for any application
No selection jumpers required for the voltages of the valve
Multi-selectable power supply without removing the panel or the card from
enclosures
Post-cleaning function with selectable number of cycles up to 255 cycles
Hours counter and pulses counter
Up two programmable alarm relays
Pilot not working alarm
Power down
External input to start/stop cleaning from remote
External input to start/stop cleaning from air tank sensor
Zero crossing switching pilot valves
Pilot manual activation
Selection of pulse-jet cleaning systems or rotating nozzle with self-selection of
optimal parameters
Protection from current overload for device and pilot valves
*!
S Series
S
CONNECTION LAYOUT
VALVES
Terminal
1 EV1
2 EV2
3 EV3
4 EV4
5 EV5
6 EV6
7 EV7
8 EV8
signal
Solenoid valve 1
Solenoid valve 2
Solenoid valve 3
Solenoid valve 4
Solenoid valve 5
Solenoid valve 6
Solenoid valve 7
Solenoid valve 8
Terminal
9 EV9
10 EV10
11 EV11
12 EV12
13 EV13
14 EV14
15 EV15
16 EV16
signal
Solenoid valve 9
Solenoid valve 10
Solenoid valve 11
Solenoid valve 12
Solenoid valve 13
Solenoid valve 14
Solenoid valve 15
Solenoid valve 16
POWER
Power Supply 230-115-24/50hz
Terminal 30 L phase
Terminal 33 N Neutral
Terminal 31 PE Ground
Power Supply 24 VDC
Terminal 32 DC +
Terminal 25 GND Negative
Terminal 31 PE ground
(internally connect to 25)
The common of solenoid valves must be connected to the type of pilot according
to the following table:
Terminal
17
18
19
20
LEGEND
230V
115V
24DC
24AC
Voltages
230VAC 50Hz
115VAC 50Hz
24VDC
24VAC 50Hz
NOTE: THE TERMINAL 31 IS THE GROUND OF DEVICE AND PULSE VALVES
ELECTRICAL CHARACTERISTICS
Power
230VAC ±10% 50 Hz
115VAC ±10% 50 Hz
24VAC ±10% 50 Hz
24VDC ±10%
Output
24VAC (MAX 20VA @ Ton Max 5s)
24VDC (MAX 20W@ Ton Max 5s)
Fuses
1 x 2 Ampere
Working temperature
-15°C÷50°C
Storage temperature
-20°C÷60°C
Timing
Pause time
5 s ÷ 50 min
Working time (air pulse)
50 ms ÷ 10 s (step 10 ms)
CE DIRECTIVES
Voltage Directive 2006/95/CE related to
the European Standard EN60947-1:2004
*"
PA
PA4 /PA8 / PA12 /PA16 Series - Multiple output voltage
DESCRIPTION
Sequencer for dedusting plant cleaning cycle. Microprocessor-operated device with electrical zero connected to ground which ensures high immunity to external interference and low field
emissions.
Max 1 output relay. Max 2 volt free digital inputs.
PA4
PA8
PA12
PA16
to control
to control
to control
to control
4 solenoid valves
8 solenoid valves
12 solenoid valves
16 solenoid valves
Supply voltage available
upon request
Output voltage
Working temperature range
Absorbed power
Protection level
Max no. of outputs
Dimensions
Dimensions
Material
230 VAC / 115 VAC
24 VAC / 24 VDC
230/115 / 24VAC - 24VDC
-10°C ÷ +50°C
10 VA (Stand by)
IP65
16
140x170x95 (PA4 - PA8)
140x230x95 (PA12 - PA16)
ABS / RAL 7035
STANDARD FEATURES
Manual selection of output number / Autoselection
Adjustable activation time per each output from 0.05 to 5 sec.
Adjustable interval time between two activations from 1 to 999 sec.
Short circuit output protection
Manual activation of each single output
Cleaning cycle ON/OFF with external pressure controller by volt free contact
Additional post-cleaning cycle after fan stop
Cleaning cycle ON/OFF by volt free external contact
Max 25W load power per each output
Input and output selection by JP1, JP2 and JP3 jumpers on the board
*#
PA4 /PA8 / PA12 /PA16 Series - Multiple output voltage
PA
WIRING DIAGRAM
K1
5A/250V
GROUND
COMMON
OUTPUT No.
C6/D6
EV1
EV3
EV2
EV5
EV4
EV7
EV6
EV9
EV7
EV11
EV10
EV13
EV12
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
(see set F07)
3
12
13
4
5
1
2
3
PA
D1a
14
15
FUSE
(See Table 1)
EV15
EV14
EV16
SUPPLY VOLTAGE
CUMULATIVE FAULT/ ALARM RELAY
Contact close with supply voltage ON and no alarm
SOLENOID VALVE VOLTAGE (see the label on the device)
FAN FAN SWITCH
(Contact close = fan ON)
NOTE D1a: put a wire at the clamps if not used with digital input enabled
CLEANING CYCLE ON/OFF BY D6 EXTERNAL CONTACT
(Contact close = cycle active)
NOTE C6/D6: put a wire at the clamps if not used with digital input enabled
Absorbed power
10 VA (Stand-by) + power EV.
Terminal
2,5 mm 2 250 VAC/12A
Working
temperature
range
-10°C ÷ +50°C
NOTE DC: With 24VDC supply voltage, the available output voltage decreases by 2V for internal timer voltage drop. Check the compatibility with the solenoid valves used.
Do no connect any supply voltage pole to ground with 24VDC supply voltage.
F01
F02
F03
F04
F05
F06
F07
F08
Digital input use
Pulse time
Interval time between events
Number of outputs
Cycles after fan stop
Manual activation
Digital input
Output voltage
0 = included 1 = excluded
0,05 ÷ 5,00 sec
1 ÷ 999 sec (see B3x)
0 ÷ 16 (seeB1b)
0 ÷ 99
C = Selection/ A = output activation
0 = C6, 1=D6 (see C6, D6)
24V, 115V, 230V (see HV)
Key A = Parameter decrement in Set
NOTE
The device will automatically switch from
Set Mode to Run Mode if no key is pressed
for 5 minutes
ALARM DESCRIPTION
3,00/H= Maximum ∆P alarm
(Blinking display)
example: E1/05 = : E1/05=05 output
overload
(Blinking display)
OPERATION
When power is supplied, the cleaning cycle starts if all the conditions required
for operation are present
OFF
-01,00/P
A01
...
1,23
E
Key B
Key C
Cycle stopped due to cleaning consent missing (D6 open)
Cycle stopped due to fan OFF
Cycle stopped due to low dP (Blinking display)
No. of activated EV
Cycles active after fan stop (Blinking points)
∆P reading (kPa)
Alarm Rest
Access to Set Up
CE DIRECTIVES
Voltage Directive 2006/95/CE related to the
European Standard EN60947-1:2004.
*$
DIGITAL DIFFERENTIAL PRESSURE CONTROLLER BY INTERNAL TRANSDUCER
BPB
BPB Series
DESCRIPTION
Digital differential pressure controller between two points with
microprocessor.
Maximum 2 output relays.
Supply voltage available upon request
Operating temperature range
Absorbed power
Protection level
Dimensions (mm)
230 VAC / 115 VAC
24 VAC / 24 VDC
-10°C ÷ +50°C
5 VA
IP65
180x130x75
STANDARD FEATURES
Minimum (K2) and maximum (K1) ∆P alarms on separate relays
Differential pressure reading by internal transducer (max 10kPa)
Minimum ∆P alarm with alarmed contact open and automatic reset
Maximum ∆P alarm with alarmed contact open and automatic reset
Zero ∆P reading adjustment
F01
Zero ∆P adjustment
F02
Min. ∆P alarm threshold
F03
Max ∆P alarm threshold
0,00 (see C8)
0,01 ÷ 9,99 kPa (E=disabled)
0,01 ÷ 9,99 kPa
Key A = Parameter decrement in Set
NOTE: The device will automatically switch from Set Mode to Run Mode if no key is
pressed for 5 minutes
OPERATION
When power is supplied, dP control starts
immediately
1,23
E
Key B
Key C
∆P reading (kPa)
Alarm reset
Access to Set Up
K1
K2
5A/250V 5A/250V
FUSE
250V / 500 mA (5x20)
BPB
P
4-20 mA P reading
(0.00 kPa+C13 x = 4+20 mA)
Supply by ECO12VDC max 450 Ohm
(Connect to other devices by passive input and preferably insulated)
2
Terminal
2,5 mm 250 VAC/12A
Working
temperature
range
-10°C ÷ +50°C
P filter clean side
P filter dirty side
+P1
MIN P ALARM RELAY
(Contact close with supply voltage ON and no alarm)
*%
C11a
+P2
MAX P ALARM RELAY
(Contact close with supply voltage ON and no alarm)
3,00/H Max dP alarm
(Blinking display)
0,50/L Min ∆P alarm
(Blinking display)
Absorbed power 10 VA (Stand-by) + power EV
10kPa
max
SUPPLY VOLTAGE
(see the label on the device)
ALARM DESCRIPTION
WIRING DIAGRAM
ELECTRONIC SINGLE TIMER
TCONTEMP
Interval time
Activation time
Manual adjustment
Supply voltage range
Current consumption
Working temperature
Protection level
Enclosure material
Connection type
Indicators
Standard design
0,5 to 45 minutes, adjustable
20 to 300 ms, adjustable
by micro-switch
24 to 240 VAC/DC 50/60Hz
4 mA max
-40°C ÷ +60°C
IP65
ABS plastic FR grade
EN175301-803 (ex DIN 43650A)
ON/OFF indication by LEDs
VDE 01 10C
*&
TURBONET BUS SYSTEM CONTROLS - Up to 144 Valves
Connection to master controller by a single 3-core cable
TurboNet master controller has been designed to
control cleaning cycle in dust collector filter applications. It features digital differential pressure control by internal transducer and provides effective
cost reduction in electrical wiring procedures. It is
a microprocessor operated system with electrical
zero connected to ground which ensures high
immunity to external interference and low field
emissions.
Max 2 output relays and 2 volt free digital inputs.
T-RCP Series
Fluid
Operating pressure
Temperature range
Base and cover
Core tube
Plunger
Screws
Coil insulation
Protection
Standar voltage
Min 0,5 bar - max 7,5 bar
-20°C +80°C
Die cast aluminium
Stainless steel
Stainless steel
Stainless steel
Class H
IP66
24V DC
MASTER WITH ∆P CONTROLLER
Master
generator
3 Wires
cables
Enclosure
Dimensions (mm)
Temperature
Power inlet
Power outlet
One time
Off time
∆P
IP65
160x137x103
-10°C +70°C
110/220 AC
24DC
0,05 ÷5 sec
1 ÷ 999 sec
10kPa
T- RCP
Pilot box
End cycle cleaning
Hour counter
Display multilanguage
Set start / Stop cleaning cycle
Alarm max ∆P
*'
MATRIX
MATRIX WIRING
WIRING SYSTEM
SYSTEM
Matrix System is designed to reduce time and cost of wiring installation.
Matrix require a simple connection to the sequencer and to pulse
valve.
FEATURES
Matrix consist in moulded prewired connectors for pulse valve
Turbo provide Matrix connectors with desired pitch between valves.
Is compatible with any sequence controller available from the market.
Matrix can be supplied factory plugged to pulse valves on the
header tank
Connectors
Cable diameter
Protection
Temperature range
Up to 12 per single belt
8 mm
IP65
-20°C / +80°C
HOW TO ORDER
MATRIX
4 P200 M3 Plugged
No.° of Connectors
Pitch (mm)
Conduit lenght to
sequencer
Terminal:
•plugged
•free wires
97
DUST EMISSION PROBE
TC
TC Series
DESCRIPTION
The TC probe surveys the passage of particles present in the gas, converting this
physical phenomenon in an electric signal
proportional to the dustiness degree. By
comparing the signal generated by TC with
preset thresholds in proper devices, it is
possible to activate an alarm at the desired value. If the cause of the alarm is due
to a broken bag, this can be identified
if it is connected to proper devices belonging to ECO series which are envisaged
for this kind of control.
TECHNICAL FEATURES
Power supply supply voltage
Output signal
Maximum load
Gas temperature
Operating temperature
Relative humidity
Housing degree protections
*)
16 ÷ 24 VDC 100mA
4 ÷ 20mA activ
350 Ohm
120°C (standard)
-10° ÷ +50°C
80%
IP65
DUST EMISSION PROBE CONTROLLER
DTC Series
DTC
DESCRIPTION
Device designed to show and check the
signal from Tribo-Electric probe to measure the quantity of dust in a duct with
gas flow.
TECHNICAL FEATURES
Emission control by connecting a Tribo-Check Probe
High emission pre-alarm with relay contact open in alarm and automatic reset
High emission alarm with relay contact open in alarm and automatic reset
TC Probe signal zero adjust
Emission value set in mg/m3
TC Probe reading meaning time
TC Probe signal reading in mA
Double terminal on the board 2,5 mm2 250V 12A
Multi language display
OPTIONS ON REQUEST
Cable glands type & Q.ty on request
Other enclosures available on request
**
ISO 9001:2008 certificated
NOTE
™
DVcSRe`Z
4VceZWZTReZ
GR]g`]VR
>V^ScR_R
aVcWZ]ecZUVa`]gVcRe`cZ
DZdeV^ZV]Veec`_ZTZ
®
TURBO srl
via Po, 33
20811 CESANO MADERNO
MB (ITALY)
phone ++39 0362 574024
fax ++39 0362 574092
[email protected]
www.turbocontrols.it
©-
All rights reserved. Design and specifications are subject to change without notice
CAT.HT_VALV 10/011 engl
®

Entire catalog - SEW North Filtration

Transcription

Similar documents

refrigerators/freezers - sfsi

Scherzi musicali

1. Sanitaryware_16.indd - Sussex Plumbing Supplies

sanitaryware sanitaryware traditional traditional

bangalore development authority