Poly Chain® GT® Carbon™ Belts

Transcription

GATES INDUSTRIAL BELT PRODUCTS
June 2012
Poly Chain GT Carbon Belts — Nothing Tougher.
Give yourself a competitive advantage by designing in the Gates
Poly Chain GT Carbon drive system instead of roller chain in your
next power transmission application.
The patented use of Carbon Fiber as the tensile cord in this belt
provides increased horsepower rating for greater power density and
compactness and increased flexibility, allowing the use of backside
idlers. When combined with Gates Poly Chain GT2 sprockets, you
have a lightweight, long-lasting, maintenance-free system that’s
more than a match for roller chain.
POLY CHAIN BELTS
Markets/Applications
All industrial markets, especially suited to replace roller chain drives.
Narrow width minimizes reducer overhung loads and left-justified
hubs on Poly Chain GT2 sprockets accommodate short shaft
lengths.
Features/Advantages
n Maintenance-free, clean solution for roller chain drive conversion
• Significantly reduces maintenance costs
• Equivalent capacity to roller chain drives in the same width
• Easy rust-free wash-down with Gates Stainless Steel hardware
• Fast drive conversion payback
• Quieter than roller chain drives
n New construction provides up to 55% more low-speed capacity than the original PCGT construction and 30%
more than PCGT2.
n Gates curvilinear tooth profile provides high shear strength, noise reduction, and improved load carrying
capacity.
n Robust carbon tensile cord combines minimal stretch with extraordinary strength and load carrying capacity,
while absorbing shock and surge loads.
n Durable polyurethane construction resists chemicals, oil, pollutants, and abrasion.
n Nylon tooth facing reduces friction and eliminates the need for lubrication.
n Fully operational in temperature extremes of -65°F to +185°F (-54°C to +85°C).
Recommended Sprockets
Poly Chain GT2 Sprockets - 8M and 14M
Notes
Poly Chain GT Carbon belts can be used on existing drives as replacement for previous generation Poly Chain belts.
Poly Chain GT Carbon belt part numbers are identical to those of Poly Chain GT2: part number 8MGT-1000-21 denotes an 8mm pitch,
1000mm pitch length and 21mm width.
Belt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt. Belt pitch length is the
total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a Poly Chain GT Carbon belt lies within
the tensile member.
WARNING: Use of non-Gates manufactured sprockets is not recommended: Gates Poly Chain GT2 sprockets are manufactured, specified
and tested to fully support the full capabilities of the Poly Chain GT Carbon belt. Product performance cannot be guaranteed when non-Gates
sprockets are used.
Always utilize Taper-Lock® type Poly Chain GT2 Sprockets when designing a new Poly Chain GT Carbon belt drive system.
Product No. Series 9274
8mm Pitch — 12mm Wide
2
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
8MGT-640-12
8MGT-720-12
8MGT-800-12
8MGT-896-12
8MGT-960-12
8MGT-1000-12
8MGT-1040-12
9274-0080
9274-0090
9274-0100
9274-0112
9274-0120
9274-0125
9274-0130
80
90
100
112
120
125
130
25.20
28.35
31.50
35.28
37.80
39.37
40.95
.40
.47
.50
.55
.58
.60
.65
8MGT-1120-12
8MGT-1200-12
8MGT-1224-12
8MGT-1280-12
8MGT-1440-12
8MGT-1600-12
8MGT-1760-12
9274-0140
9274-0150
9274-0153
9274-0160
9274-0180
9274-0200
9274-0220
140
150
153
160
180
200
220
44.09
47.24
48.19
50.39
56.69
62.99
69.29
.68
.70
.72
.75
.80
.90
.95
gates.com/pt
Gates Corporation
®
June 2012
Product No. Series 9274 (continued)
8mm Pitch — 12mm Wide (continued)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
8MGT-1792-12
8MGT-2000-12
8MGT-2200-12
8MGT-2240-12
8MGT-2400-12
8MGT-2520-12
8MGT-2600-12
8MGT-2800-12
9274-0224
9274-0250
9274-0275
9274-0280
9274-0300
9274-0315
9274-0325
9274-0350
224
250
275
280
300
315
325
350
70.55
78.74
86.61
88.19
94.49
99.21
102.36
110.24
1.00
1.10
1.15
1.20
1.30
1.35
1.40
1.50
8MGT-2840-12
8MGT-3048-12
8MGT-3200-12
8MGT-3280-12
8MGT-3600-12
8MGT-4000-12
8MGT-4400-12
8MGT-4480-12
9274-0355
9274-0381
9274-0400
9274-0410
9274-0450
9274-0500
9274-0550
9274-0560
355
381
400
410
450
500
550
560
111.81
120.00
125.98
129.13
141.73
157.48
173.23
176.38
1.52
1.65
1.70
1.75
1.85
2.10
2.25
2.33
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
8MGT-640-21
8MGT-720-21
8MGT-800-21
8MGT-896-21
8MGT-960-21
8MGT-1000-21
8MGT-1040-21
8MGT-1120-21
8MGT-1200-21
8MGT-1224-21
8MGT-1280-21
8MGT-1440-21
8MGT-1600-21
8MGT-1760-21
8MGT-1792-21
9274-1080
9274-1090
9274-1100
9274-1112
9274-1120
9274-1125
9274-1130
9274-1140
9274-1150
9274-1153
9274-1160
9274-1180
9274-1200
9274-1220
9274-1224
80
90
100
112
120
125
130
140
150
153
160
180
200
220
224
25.20
28.35
31.50
35.28
37.80
39.37
40.95
44.09
47.24
48.19
50.39
56.69
62.99
69.29
70.55
.40
.45
.50
.53
.58
.60
.65
.70
.75
.75
.80
.90
1.00
1.15
1.15
8MGT-2000-21
8MGT-2200-21
8MGT-2240-21
8MGT-2400-21
8MGT-2520-21
8MGT-2600-21
8MGT-2800-21
8MGT-2840-21
8MGT-3048-21
8MGT-3200-21
8MGT-3280-21
8MGT-3600-21
8MGT-4000-21
8MGT-4400-21
8MGT-4480-21
9274-1250
9274-1275
9274-1280
9274-1300
9274-1315
9274-1325
9274-1350
9274-1355
9274-1381
9274-1400
9274-1410
9274-1450
9274-1500
9274-1550
9274-1560
250
275
280
300
315
325
350
355
381
400
410
450
500
550
560
78.74
86.61
88.19
94.49
99.21
102.36
110.24
111.81
120.00
125.98
129.13
141.73
157.48
173.23
176.38
1.25
1.38
1.40
1.50
1.60
1.65
1.75
1.80
1.90
2.05
2.10
2.25
2.55
2.75
2.80
POLY CHAIN BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
8MGT-640-36
8MGT-720-36
8MGT-800-36
8MGT-896-36
8MGT-960-36
8MGT-1000-36
8MGT-1040-36
8MGT-1120-36
8MGT-1200-36
8MGT-1224-36
8MGT-1280-36
8MGT-1440-36
8MGT-1600-36
8MGT-1760-36
8MGT-1792-36
9274-2080
9274-2090
9274-2100
9274-2112
9274-2120
9274-2125
9274-2130
9274-2140
9274-2150
9274-2153
9274-2160
9274-2180
9274-2200
9274-2220
9274-2224
80
90
100
112
120
125
130
140
150
153
160
180
200
220
224
25.20
28.35
31.50
35.28
37.80
39.37
40.95
44.09
47.24
48.19
50.39
56.69
62.99
69.29
70.55
.70
.75
.80
.90
.97
1.00
1.02
1.10
1.12
1.20
1.25
1.35
1.45
1.60
1.65
8MGT-2000-36
8MGT-2200-36
8MGT-2240-36
8MGT-2400-36
8MGT-2520-36
8MGT-2600-36
8MGT-2800-36
8MGT-2840-36
8MGT-3048-36
8MGT-3200-36
8MGT-3280-36
8MGT-3600-36
8MGT-4000-36
8MGT-4400-36
8MGT-4480-36
9274-2250
9274-2275
9274-2280
9274-2300
9274-2315
9274-2325
9274-2350
9274-2355
9274-2381
9274-2400
9274-2410
9274-2450
9274-2500
9274-2550
9274-2560
250
275
280
300
315
325
350
355
381
400
410
450
500
550
560
78.74
86.61
88.19
94.49
99.21
102.36
110.24
111.81
120.00
125.98
129.13
141.73
157.48
173.23
176.38
1.70
1.88
1.90
2.00
2.15
2.30
2.40
2.50
2.62
2.70
2.72
2.95
3.25
3.55
3.60
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
8MGT-640-62
8MGT-720-62
8MGT-800-62
8MGT-896-62
8MGT-960-62
8MGT-1000-62
8MGT-1040-62
9274-3080
9274-3090
9274-3100
9274-3112
9274-3120
9274-3125
9274-3130
80
90
100
112
120
125
130
25.20
28.35
31.50
35.28
37.80
39.37
40.95
.80
1.00
1.08
1.20
1.25
1.30
1.35
8MGT-1120-62
8MGT-1200-62
8MGT-1224-62
8MGT-1280-62
8MGT-1440-62
8MGT-1600-62
8MGT-1760-62
9274-3140
9274-3150
9274-3153
9274-3160
9274-3180
9274-3200
9274-3220
140
150
153
160
180
200
220
44.09
47.24
48.19
50.39
56.69
62.99
69.29
1.40
1.75
1.65
1.70
1.85
2.00
2.10
®
Powering Progress.
gates.com/pt
3
June 2012
POLY CHAIN BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
8MGT-1792-62
8MGT-2000-62
8MGT-2200-62
8MGT-2240-62
8MGT-2400-62
8MGT-2520-62
8MGT-2600-62
8MGT-2800-62
9274-3224
9274-3250
9274-3275
9274-3280
9274-3300
9274-3315
9274-3325
9274-3350
224
250
275
280
300
315
325
350
70.55
78.74
86.61
88.19
94.49
99.21
102.36
110.24
2.10
2.30
2.50
2.55
2.80
2.90
2.95
3.10
8MGT-2840-62
8MGT-3048-62
8MGT-3200-62
8MGT-3280-62
8MGT-3600-62
8MGT-4000-62
8MGT-4400-62
8MGT-4480-62
9274-3355
9274-3381
9274-3400
9274-3410
9274-3450
9274-3500
9274-3550
9274-3560
355
381
400
410
450
500
550
560
111.81
120.00
125.98
129.13
141.73
157.48
173.23
176.38
3.15
3.40
3.60
3.70
4.05
4.40
4.80
4.90
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-2450-20
14MGT-2520-20
14MGT-2590-20
14MGT-2660-20
14MGT-2800-20
14MGT-3136-20
14MGT-3304-20
14MGT-3360-20
14MGT-3500-20
14MGT-3850-20
14MGT-3920-20
14MGT-4326-20
14MGT-4410-20
9274-4175
9274-4180
9274-4185
9274-4190
9274-4200
9274-4224
9274-4236
9274-4240
9274-4250
9274-4275
9274-4280
9274-4309
9274-4315
175
180
185
190
200
224
236
240
250
275
280
309
315
96.46
99.21
101.97
104.72
110.24
123.46
130.08
132.28
137.80
151.58
154.33
170.32
173.62
2.15
2.20
2.20
2.25
2.30
2.50
2.55
2.60
2.70
2.85
2.95
3.15
3.20
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-2450-37
14MGT-2520-37
14MGT-2590-37
14MGT-2660-37
14MGT-2800-37
14MGT-3136-37
14MGT-3304-37
14MGT-3360-37
14MGT-3500-37
14MGT-3850-37
14MGT-3920-37
14MGT-4326-37
14MGT-4410-37
9274-5175
9274-5180
9274-5185
9274-5190
9274-5200
9274-5224
9274-5236
9274-5240
9274-5250
9274-5275
9274-5280
9274-5309
9274-5315
175
180
185
190
200
224
236
240
250
275
280
309
315
96.46
99.21
101.97
104.72
110.24
123.46
130.08
132.28
137.80
151.58
154.33
170.32
173.62
3.10
3.20
3.25
3.35
3.40
3.65
3.85
3.85
3.95
4.25
4.35
4.70
4.75
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-994-20
14MGT-1120-20
14MGT-1190-20
14MGT-1260-20
14MGT-1400-20
14MGT-1568-20
14MGT-1610-20
14MGT-1750-20
14MGT-1890-20
14MGT-1960-20
14MGT-2100-20
14MGT-2240-20
14MGT-2310-20
14MGT-2380-20
9274-4071
9274-4080
9274-4085
9274-4090
9274-4100
9274-4112
9274-4115
9274-4125
9274-4135
9274-4140
9274-4150
9274-4160
9274-4165
9274-4170
71
80
85
90
100
112
115
125
135
140
150
160
165
170
39.13
44.09
46.85
49.61
55.12
61.73
63.39
68.90
74.41
77.17
82.68
88.19
90.95
93.70
1.30
1.35
1.40
1.45
1.55
1.65
1.70
1.75
1.75
1.80
1.90
1.98
2.05
2.10
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-994-37
14MGT-1120-37
14MGT-1190-37
14MGT-1260-37
14MGT-1400-37
14MGT-1568-37
14MGT-1610-37
14MGT-1750-37
14MGT-1890-37
14MGT-1960-37
14MGT-2100-37
14MGT-2240-37
14MGT-2310-37
14MGT-2380-37
9274-5071
9274-5080
9274-5085
9274-5090
9274-5100
9274-5112
9274-5115
9274-5125
9274-5135
9274-5140
9274-5150
9274-5160
9274-5165
9274-5170
71
80
85
90
100
112
115
125
135
140
150
160
165
170
39.13
44.09
46.85
49.61
55.12
61.73
63.39
68.90
74.41
77.17
82.68
88.19
90.95
93.70
1.60
1.70
1.75
1.80
2.05
2.20
2.30
2.45
2.55
2.60
2.70
2.85
2.90
3.00
4
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-994-68
14MGT-1120-68
14MGT-1190-68
14MGT-1260-68
14MGT-1400-68
14MGT-1568-68
14MGT-1610-68
14MGT-1750-68
14MGT-1890-68
9274-6071
9274-6080
9274-6085
9274-6090
9274-6100
9274-6112
9274-6115
9274-6125
9274-6135
71
80
85
90
100
112
115
125
135
39.13
44.09
46.85
49.61
55.12
61.73
63.39
68.90
74.41
2.40
2.60
2.70
2.80
3.00
3.25
3.40
3.60
3.95
14MGT-1960-68
14MGT-2100-68
14MGT-2240-68
14MGT-2310-68
14MGT-2380-68
14MGT-2450-68
14MGT-2520-68
14MGT-2590-68
14MGT-2660-68
9274-6140
9274-6150
9274-6160
9274-6165
9274-6170
9274-6175
9274-6180
9274-6185
9274-6190
140
150
160
165
170
175
180
185
190
77.17
82.68
88.19
90.95
93.70
96.46
99.21
101.97
104.72
4.00
4.20
4.50
4.70
4.70
4.85
4.90
5.00
5.15
gates.com/pt
Gates Corporation
®
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-2800-68
14MGT-3136-68
14MGT-3304-68
14MGT-3360-68
14MGT-3500-68
9274-6200
9274-6224
9274-6236
9274-6240
9274-6250
200
224
236
240
250
110.24
123.46
130.08
132.28
137.80
5.20
5.80
6.05
6.10
6.30
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-3850-68
14MGT-3920-68
14MGT-4326-68
14MGT-4410-68
9274-6275
9274-6280
9274-6309
9274-6315
275
280
309
315
151.58
154.33
170.32
173.62
6.80
7.00
7.70
7.85
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-2450-90
14MGT-2520-90
14MGT-2590-90
14MGT-2660-90
14MGT-2800-90
14MGT-3136-90
14MGT-3304-90
14MGT-3360-90
14MGT-3500-90
14MGT-3850-90
14MGT-3920-90
14MGT-4326-90
14MGT-4410-90
9274-7175
9274-7180
9274-7185
9274-7190
9274-7200
9274-7224
9274-7236
9274-7240
9274-7250
9274-7275
9274-7280
9274-7309
9274-7315
175
180
185
190
200
224
236
240
250
275
280
309
315
96.46
99.21
101.97
104.72
110.24
123.46
130.08
132.28
137.80
151.58
154.33
170.32
173.62
5.85
5.90
5.95
6.10
6.40
7.00
7.35
7.50
7.70
8.30
8.50
9.20
9.30
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-2450-125
14MGT-2520-125
14MGT-2590-125
14MGT-2660-125
14MGT-2800-125
14MGT-3136-125
14MGT-3304-125
14MGT-3360-125
14MGT-3500-125
14MGT-3850-125
14MGT-3920-125
14MGT-4326-125
14MGT-4410-125
9274-8175
9274-8180
9274-8185
9274-8190
9274-8200
9274-8224
9274-8236
9274-8240
9274-8250
9274-8275
9274-8280
9274-8309
9274-8315
175
180
185
190
200
224
236
240
250
275
280
309
315
96.46
99.21
101.97
104.72
110.24
123.46
130.08
132.28
137.80
151.58
154.33
170.32
173.62
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-994-90
14MGT-1120-90
14MGT-1190-90
14MGT-1260-90
14MGT-1400-90
14MGT-1568-90
14MGT-1610-90
14MGT-1750-90
14MGT-1890-90
14MGT-1960-90
14MGT-2100-90
14MGT-2240-90
14MGT-2310-90
14MGT-2380-90
9274-7071
9274-7080
9274-7085
9274-7090
9274-7100
9274-7112
9274-7115
9274-7125
9274-7135
9274-7140
9274-7150
9274-7160
9274-7165
9274-7170
71
80
85
90
100
112
115
125
135
140
150
160
165
170
39.13
44.09
46.85
49.61
55.12
61.73
63.39
68.90
74.41
77.17
82.68
88.19
90.95
93.70
3.00
3.30
3.35
3.60
3.35
4.10
4.25
4.50
4.85
4.95
5.20
5.45
5.50
5.70
POLY CHAIN BELTS
Part
No.
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-994-125
14MGT-1120-125
14MGT-1190-125
14MGT-1260-125
14MGT-1400-125
14MGT-1568-125
14MGT-1610-125
14MGT-1750-125
14MGT-1890-125
14MGT-1960-125
14MGT-2100-125
14MGT-2240-125
14MGT-2310-125
14MGT-2380-125
9274-8071
9274-8080
9274-8085
9274-8090
9274-8100
9274-8112
9274-8115
9274-8125
9274-8135
9274-8140
9274-8150
9274-8160
9274-8165
9274-8170
71
80
85
90
100
112
115
125
135
140
150
160
165
170
39.13
44.09
46.85
49.61
55.12
61.73
63.39
68.90
74.41
77.17
82.68
88.19
90.95
93.70
3.60
3.90
4.00
4.20
4.60
5.00
5.20
5.40
5.80
6.00
6.50
6.80
7.00
7.10
®
Powering Progress.
gates.com/pt
7.20
7.40
7.60
7.75
8.30
9.10
9.50
9.65
10.00
10.75
11.00
12.00
12.20
5
June 2012
Poly Chain® GT® Carbon™ - Extended Length Belts
A new and unique manufacturing process allows longer and
custom length endless belts than have previously been available.
This manufacturing process is used for the following belt length
ranges: 14M Pitch Lengths > 4410mm.
Polyurethane
Construction
All industrial markets requiring long center distance and high load
carrying capacity. Especially targeted towards HVAC, roller chain
and gear replacement, oil, mining, water treatment plants, pulp
and paper, and general manufacturing.
Carbon
Tensile Cords
Patented Curvilinear
Tooth Profile
POLY CHAIN BELTS
Features/Advantages
n Durable polyurethane construction resists chemicals, oil,
Nylon Tooth
Facing
pollutants, and abrasion.
n Fully operational in temperature extremes of -65°F to +185°F
(-54°C to +85°C).
n Gates patented curvilinear tooth profile provides high shear strength, and improved load carrying capacity.
n Robust carbon tensile cord combines minimal stretch with extraordinary strength and load carrying capacity,
while absorbing shock and surge loads.
Poly Chain® GT®2 Sprockets - 14M
Notes
total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a Poly Chain® GT® Carbon™ belt lies
within the tensile member.
Poly Chain® GT® Carbon™ Spiral Spliced Belts are Standard/Non-Stock and may require lead time. Please check with Customer Service for
availability.
WARNING: Use of non-Gates manufactured sprockets is not recommended: Gates Poly® Chain® GT®2 sprockets are manufactured, specified
and tested to fully support the full capabilities of the Poly Chain® GT® Carbon™ belt. Product performance cannot be guaranteed when
non-Gates sprockets are used. Always utilize Taper-Lock® type Gates Poly Chain® GT®2 Sprockets when designing a new Poly Chain® GT®
Carbon™ belt drive system.
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-4578EL-37
14MGT-4956EL-37
14MGT-5320EL-37
9268-2001
9268-2004
9268-2007
327
354
380
180.24
195.12
209.45
2.92
3.16
3.39
14MGT-5740EL-37
14MGT-6160EL-37
14MGT-6860EL-37
9268-2010
9268-2013
9268-2016
410
440
490
225.99
242.52
270.08
3.66
3.93
4.37
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14MGT-4578EL-68
14MGT-4956EL-68
14MGT-5320EL-68
9268-2002
9268-2005
9268-2008
327
354
380
180.24
195.12
209.45
5.36
5.81
6.23
14MGT-5740EL-68
14MGT-6160EL-68
14MGT-6860EL-68
9268-2011
9268-2014
9268-2017
410
440
490
225.99
242.52
270.08
6.73
7.22
8.04
Wt.
Ea.
(Lbs.)
6
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
14MGT-4578EL-90
14MGT-4956EL-90
14MGT-5320EL-90
9268-2003
9268-2006
9268-2009
327
354
380
180.24
195.12
209.45
7.10
7.69
8.25
14MGT-5740EL-90
14MGT-6160EL-90
14MGT-6860EL-90
9268-2012
9268-2015
9268-2018
410
440
490
225.98
242.52
270.08
gates.com/pt
Gates Corporation
8.90
9.55
10.64
®
June 2012
Curve Saw Poly Chain® GT®2 Belts
An innovative construction combined with the Gates tooth profile
makes the Curve Saw Belt compact and lightweight with
extraordinary strength and load carrying capacity. The Curve Saw
Belt can be used on the toughest shock loaded applications to
reduce down time.
All industrial markets, but particularly suited for Curve Saw
applications or any shock loaded application requiring
synchronization.
Features/Advantages
POLY CHAIN BELTS
n Gates patented curvilinear tooth profile provides high shear
strength, and improved load carrying capacity.
n Unique aramid tensile cord combines extraordinary strength
and superior shock load capacity.
n Significantly reduces log jams and associated down time.
n Nylon tooth facing reduces friction and eliminates the need for
lubrication.
(-54°C to +85°C).
Poly Chain GT2 Sprockets - 14M
Notes
Belt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt.
Belt pitch length is the total length (circumference) in millimeters as measured along the pitch line.
The theoretical pitch line of a Poly Chain GT2 belt lies within the tensile member.
WARNING: New designs must utilize the Poly Chain GT2 Sprockets because of the high torque capacity of the Curve Saw Poly Chain GT2
Belt.
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
14M-2520-125PS
14M-3136-125PS
14M-3304-125PS
14M-3500-125PS
9279-0646
9279-0647
9279-0648
9279-0649
180
224
236
250
99.21
123.46
130.08
137.80
4.40
6.56
7.20
8.20
®
Powering Progress.
gates.com/pt
7
June 2012
Poly Chain® GT® Carbon™ Belts - 8M Short Length
Poly Chain GT Carbon Belts — Nothing Tougher™.
The new Poly Chain GT Carbon belt construction utilizes a
polyurethane body combined with Carbon Fiber tensile cords
for increased capacity and performance.
All industrial markets requiring short center distance but
high-density power. Particularly suited for replacing roller chain
on roll-to-roll conveyors.
POLY CHAIN BELTS
Features/Advantages
n Robust carbon tensile cord combines minimal stretch with
extraordinary strength and load carrying capacity, while
absorbing shock and surge loads.
n Nylon tooth facing reduces friction and eliminates the need
for lubrication.
n Gates patented tooth profile provides high shear strength,
noise reduction, and improved load carrying capacity.
(-54°C to +85°C).
Carbon Tensile
Cords
Carbon Blue Nylon
Tooth Facing
Poly Chain GT2
Notes
Poly Chain GT Carbon belts must be used with sprockets of the same pitch and profile.
Poly Chain GT Carbon part numbers are comprised of pitch, pitch length and width. For example, part number 8M-248-12 denotes an 8mm
pitch, 248mm pitch length and 12mm width. Belt pitch is the distance in millimeters between two adjacent tooth centers as measured on the
pitch line of the belt. Belt pitch length is the total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch
line of a Poly Chain GT belt lies within the tensile member.
Part
No.
Product
No.
8MGT-248-12
8MGT-288-12
8MGT-352-12
8MGT-416-12
9270-1063
9270-1001
9270-1002
9270-1004
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
31
36
44
52
9.76
11.34
13.86
16.38
.04
.04
.05
.05
8MGT-456-12
8MGT-480-12
8MGT-544-12
8MGT-608-12
9270-1060
9270-1015
9270-1006
9270-1050
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
31
36
44
52
9.76
11.34
13.86
16.38
.05
.06
.07
.09
8MGT-456-21
8MGT-480-21
8MGT-544-21
8MGT-608-21
9270-1069
9270-1023
9270-1070
9270-1071
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
31
36
44
52
9.76
11.34
13.86
16.38
.09
.11
.13
.15
8MGT-456-36
8MGT-480-36
8MGT-544-36
8MGT-608-36
9270-1076
9270-1066
9270-1077
9270-1079
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
57
60
68
76
17.95
18.90
21.42
23.94
.06
.06
.07
.07
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
57
60
68
76
17.95
18.90
21.42
23.94
.10
.10
.12
.13
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
57
60
68
76
17.95
18.90
21.42
23.94
.17
.18
.20
.22
Part
No.
Product
No.
8MGT-248-21
8MGT-288-21
8MGT-352-21
8MGT-416-21
9270-1064
9270-1056
9270-1065
9270-1025
8
Part
No.
Product
No.
8MGT-248-36
8MGT-288-36
8MGT-352-36
8MGT-416-36
9270-1072
9270-1074
9270-1073
9270-1075
gates.com/pt
Gates Corporation
®
June 2012
Poly Chain® GT® Belts - 5M
The original Poly Chain GT belt construction utilizes a
polyurethane body combined with aramid tensile cords for
increased capacity and performance.
All industrial markets requiring high-density power. Especially
targeted toward machine tool, roller chain, small conveyors
and compact drives where space is a problem.
Features/Advantages
POLY CHAIN BELTS
n Robust aramid tensile cord combines minimal stretch with
n Nylon tooth facing reduces friction and eliminates the need
for lubrication.
n Gates patented tooth profile provides high shear strength,
noise reduction, and improved load carrying capacity.
(-54°C to +85°C).
PowerGrip GT2 and Poly Chain GT
Notes
5M Poly Chain GT part numbers are comprised of pitch, pitch length and width. For example; part number 5MGT-425-15 denotes a 5mm pitch,
total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a Poly Chain GT belt lies within the
tensile member.
WARNING: 5M Poly Chain GT belts must be used with 5MGT sprockets. Consult your local Gates Field Representative for drive design
assistance.
Part
No.
Product
No.
5MGT-300-09
5MGT-375-09
5MGT-425-09
9270-5700
9270-5200
9270-5400
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
60
75
85
11.81
14.76
16.73
.03
.04
.04
5MGT-535-09
5MGT-600-09
5MGT-815-09
9270-5720
9270-5500
9270-5600
107
120
163
21.06
23.62
32.09
.06
.07
.09
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
60
75
85
11.81
14.76
16.73
.02
.03
.04
5MGT-535-15
5MGT-600-15
5MGT-815-15
9270-5730
9270-5525
9270-5625
107
120
163
21.06
23.62
32.09
.05
.06
.09
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
60
75
85
11.81
14.76
16.73
.04
.05
.06
5MGT-535-25
5MGT-600-25
5MGT-815-25
9270-5740
9270-5550
9270-5650
107
120
163
21.06
23.62
32.09
.09
.10
.14
Part
No.
Product
No.
5MGT-300-15
5MGT-375-15
5MGT-425-15
9270-5680
9270-5250
9270-5425
Part
No.
Product
No.
5MGT-300-25
5MGT-375-25
5MGT-425-25
9270-5710
9270-5300
9270-5450
®
Powering Progress.
gates.com/pt
9
June 2012
Poly Chain® HTD® Belts
Gates original HTD tooth profile combined with Poly Chain belt
construction.
Suitable for replacement of HTD belts in HTD sprockets.
Features/Advantages
n The durable polyurethane body resists chemicals, oil,
n Robust aramid tensile cords combine minimal stretch with
extraordinary strength.
n Nylon tooth facing provides durable wear surface for long life.
POLY CHAIN BELTS
Contact the Gates Made-To-Order Metals Team.
Notes
Poly Chain HTD Belts are Made-To-Order. Minimum order quantities and manufacturing lead times may apply. Contact Customer Service for
availability.
Poly Chain HTD part numbers are comprised of pitch, pitch length and width. For example; part number PC1190-14M-55 denotes “PC” for
Poly Chain, 1190mm pitch length, 14mm pitch and 55mm width.
total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a Poly Chain HTD belt lies within the
tensile member.
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
PC966-14M-20
PC1190-14M-20
PC1400-14M-20
PC1610-14M-20
PC1778-14M-20
PC1890-14M-20
PC2100-14M-20
PC2310-14M-20
9258-0080
9258-0087
9258-0094
9258-0101
9258-0108
9258-0115
9258-0122
9258-0129
69
85
100
115
127
135
150
165
38.03
46.85
55.12
63.38
70.00
74.40
82.67
90.94
.35
.44
.51
.59
.65
.69
.77
.84
PC966-14M-55
PC1190-14M-55
PC1400-14M-55
PC1610-14M-55
PC1778-14M-55
PC1890-14M-55
PC2100-14M-55
PC2310-14M-55
9258-0083
9258-0090
9258-0097
9258-0104
9258-0111
9258-0118
9258-0125
9258-0132
69
85
100
115
127
135
150
165
38.03
46.85
55.12
63.38
70.00
74.40
82.67
90.94
.97
1.20
1.41
1.62
1.79
1.90
2.11
2.32
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
PC966-14M-85
PC1190-14M-85
PC1400-14M-85
PC1610-14M-85
PC1778-14M-85
PC1890-14M-85
PC2100-14M-85
PC2310-14M-85
9258-0084
9258-0091
9258-0098
9258-0105
9258-0112
9258-0119
9258-0126
9258-0133
69
85
100
115
127
135
150
165
38.03
46.85
55.12
63.38
70.00
74.40
82.67
90.94
1.50
1.85
2.18
2.50
2.76
2.94
3.27
3.59
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
PC966-14M-30
PC1190-14M-30
PC1400-14M-30
PC1610-14M-30
PC1778-14M-30
PC1890-14M-30
PC2100-14M-30
PC2310-14M-30
9258-0081
9258-0088
9258-0095
9258-0102
9258-0109
9258-0116
9258-0123
9258-0130
69
85
100
115
127
135
150
165
38.03
46.85
55.12
63.38
70.00
74.40
82.67
90.94
.53
.60
.77
.88
.98
1.04
1.15
1.27
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
.71
.87
1.02
1.18
1.30
1.38
1.54
1.69
PC966-14M-115
PC1190-14M-115
PC1400-14M-115
PC1610-14M-115
PC1778-14M-115
PC1890-14M-115
PC2100-14M-115
PC2310-14M-115
9258-0085
9258-0092
9258-0099
9258-0106
9258-0113
9258-0120
9258-0127
9258-0134
69
85
100
115
127
135
150
165
38.03
46.85
55.12
63.38
70.00
74.40
82.67
90.94
2.03
2.50
2.95
3.39
3.74
4.00
4.42
4.86
10
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
PC966-14M-40
PC1190-14M-40
PC1400-14M-40
PC1610-14M-40
PC1778-14M-40
PC1890-14M-40
PC2100-14M-40
PC2310-14M-40
9258-0082
9258-0089
9258-0096
9258-0103
9258-0110
9258-0117
9258-0124
9258-0131
69
85
100
115
127
135
150
165
38.03
46.85
55.12
63.38
70.00
74.40
82.67
90.94
gates.com/pt
Gates Corporation
®
June 2012
Poly Chain® HTD® Belts
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
PC966-14M-170
PC1190-14M-170
PC1400-14M-170
PC1610-14M-170
PC1778-14M-170
PC1890-14M-170
PC2100-14M-170
PC2310-14M-170
9258-0086
9258-0093
9258-0100
9258-0107
9258-0114
9258-0121
9258-0128
9258-0135
69
85
100
115
127
135
150
165
38.03
46.85
55.12
63.38
70.00
74.40
82.67
90.94
3.00
3.70
4.35
5.01
5.53
5.88
6.53
7.19
POLY CHAIN BELTS
®
Powering Progress.
gates.com/pt
11
June 2012
Eliminator® Belts
Gates Eliminator belt eliminates the competition.
It’s a high-performance, polyurethane, synchronous belt designed
to replace an RPP® belt of the same pitch, width and comparable
length (within approximately +/-.5" on center distance maximum).
Any industrial applications utilizing RPP belts and sprockets,
including Good Year® Blackhawk Pd™, Browning® RPP Panther®,
Carlisle/Dayco® RPP Panther Ultra and TB Wood’s® QT Power
Chain®.
Features/Advantages
n With durable polyurethane construction and robust aramid
tensile, the Eliminator belt will last a minimum of two times longer
than competitive RPP belts.
n The Eliminator tooth profile is designed to fit all RPP sprocket
grooves, therefore it’s not necessary to change sprockets, saving
money on transaction costs and reducing downtime.
n Green nylon tooth facing reduces friction and provides durable wear surface for long life.
ELIMINATOR BELTS
Notes
Eliminator belts are Made-To-Order. Minimum order quantities and manufacturing lead times may apply. Eliminator part numbers are
comprised of pitch, pitch length and width. For example; part number 1280-8M-12E denotes a 1280mm pitch length, 8mm pitch, 12mm width,
and “E” for Eliminator.
total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of an Eliminator belt lies within the tensile
member.
8mm Pitch
12
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Pitch
Length
(In.)
Belt
Width
(mm)
Belt Width
(In.)
Wt.
Ea.
(Lbs.)
640-8M-12E
640-8M-22E
640-8M-35E
640-8M-60E
720-8M-12E
720-8M-22E
720-8M-35E
720-8M-60E
800-8M-12E
800-8M-22E
800-8M-35E
800-8M-60E
896-8M-12E
896-8M-22E
896-8M-35E
896-8M-60E
960-8M-12E
960-8M-22E
960-8M-35E
960-8M-60E
1040-8M-12E
1040-8M-22E
1040-8M-35E
1040-8M-60E
1120-8M-12E
1120-8M-22E
1120-8M-35E
1120-8M-60E
9307-0080
9307-1080
9307-2080
9307-3080
9307-0090
9307-1090
9307-2090
9307-3090
9307-0100
9307-1100
9307-2100
9307-3100
9307-0112
9307-1112
9307-2112
9307-3112
9307-0120
9307-1120
9307-2120
9307-3120
9307-0130
9307-1130
9307-2130
9307-3130
9307-0140
9307-1140
9307-2140
9307-3140
80
80
80
80
90
90
90
90
100
100
100
100
112
112
112
112
120
120
120
120
130
130
130
130
140
140
140
140
640
640
640
640
720
720
720
720
800
800
800
800
896
896
896
896
960
960
960
960
1040
1040
1040
1040
1120
1120
1120
1120
25.197
25.197
25.197
25.197
28.346
28.346
28.346
28.346
31.496
31.496
31.496
31.496
35.276
35.276
35.276
35.276
37.795
37.795
37.795
37.795
40.945
40.945
40.945
40.945
44.094
44.094
44.094
44.094
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.47
.53
.80
.95
.52
.60
.85
1.05
.57
.65
.90
1.10
.62
.70
1.00
1.20
.64
.71
1.00
1.22
.65
.75
1.05
1.30
.70
.82
1.10
1.40
gates.com/pt
Gates Corporation
®
June 2012
Eliminator® Belts
8mm Pitch (continued)
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Pitch
Length
(In.)
Belt
Width
(mm)
Belt Width
(In.)
Wt.
Ea.
(Lbs.)
1200-8M-12E
1200-8M-22E
1200-8M-35E
1200-8M-60E
1224-8M-12E
1224-8M-22E
1224-8M-35E
1224-8M-60E
1280-8M-12E
1280-8M-22E
1280-8M-35E
1280-8M-60E
1440-8M-12E
1440-8M-22E
1440-8M-35E
1440-8M-60E
1600-8M-12E
1600-8M-22E
1600-8M-35E
1600-8M-60E
1760-8M-12E
1760-8M-22E
1760-8M-35E
1760-8M-60E
1792-8M-12E
1792-8M-22E
1792-8M-35E
1792-8M-60E
2000-8M-12E
2000-8M-22E
2000-8M-35E
2000-8M-60E
2200-8M-12E
2200-8M-22E
2200-8M-35E
2200-8M-60E
2400-8M-12E
2400-8M-22E
2400-8M-35E
2400-8M-60E
2600-8M-12E
2600-8M-22E
2600-8M-35E
2600-8M-60E
2800-8M-12E
2800-8M-22E
2800-8M-35E
2800-8M-60E
3048-8M-12E
3048-8M-22E
3048-8M-35E
3048-8M-60E
3280-8M-12E
3280-8M-22E
3280-8M-35E
3280-8M-60E
3600-8M-12E
3600-8M-22E
3600-8M-35E
3600-8M-60E
9307-0150
9307-1150
9307-2150
9307-3150
9307-0153
9307-1153
9307-2153
9307-3153
9307-0160
9307-1160
9307-2160
9307-3160
9307-0180
9307-1180
9307-2180
9307-3180
9307-0200
9307-1200
9307-2200
9307-3200
9307-0220
9307-1220
9307-2220
9307-3220
9307-0224
9307-1224
9307-2224
9307-3224
9307-0250
9307-1250
9307-2250
9307-3250
9307-0275
9307-1275
9307-2275
9307-3275
9307-0300
9307-1300
9307-2300
9307-3300
9307-0325
9307-1325
9307-2325
9307-3325
9307-0350
9307-1350
9307-2350
9307-3350
9307-0381
9307-1381
9307-2381
9307-3381
9307-0410
9307-1410
9307-2410
9307-3410
9307-0450
9307-1450
9307-2450
9307-3450
150
150
150
150
153
153
153
153
160
160
160
160
180
180
180
180
200
200
200
200
220
220
220
220
224
224
224
224
250
250
250
250
275
275
275
275
300
300
300
300
325
325
325
325
350
350
350
350
381
381
381
381
410
410
410
410
450
450
450
450
1200
1200
1200
1200
1224
1224
1224
1224
1280
1280
1280
1280
1440
1440
1440
1440
1600
1600
1600
1600
1760
1760
1760
1760
1792
1792
1792
1792
2000
2000
2000
2000
2200
2200
2200
2200
2400
2400
2400
2400
2600
2600
2600
2600
2800
2800
2800
2800
3048
3048
3048
3048
3280
3280
3280
3280
3600
3600
3600
3600
47.244
47.244
47.244
47.244
48.189
48.189
48.189
48.189
50.394
50.394
50.394
50.394
56.693
56.693
56.693
56.693
62.992
62.992
62.992
62.992
69.291
69.291
69.291
69.291
70.551
70.551
70.551
70.551
78.740
78.740
78.740
78.740
86.614
86.614
86.614
86.614
94.488
94.488
94.488
94.488
102.362
102.362
102.362
102.362
110.236
110.236
110.236
110.236
120.000
120.000
120.000
120.000
129.134
129.134
129.134
129.134
141.732
141.732
141.732
141.732
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
12
22
35
60
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.472
.866
1.378
2.362
.75
.85
1.15
1.45
.75
.85
1.15
1.45
.80
.90
1.20
1.50
.85
1.00
1.30
1.65
.93
1.10
1.38
1.80
1.00
1.20
1.47
1.92
1.03
1.20
1.48
1.93
1.10
1.33
1.62
2.12
1.20
1.45
1.75
2.30
1.30
1.57
1.85
2.45
1.40
1.68
1.96
2.62
1.50
1.80
2.08
2.80
1.60
1.93
2.25
3.00
1.67
2.03
2.40
3.20
1.83
2.25
2.55
3.45
®
Powering Progress.
gates.com/pt
ELIMINATOR BELTS
Part
No.
13
June 2012
Eliminator® Belts
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Pitch
Length
(In.)
Belt
Width
(mm)
Belt Width
(In.)
Wt.
Ea.
(Lbs.)
4400-8M-12E
4400-8M-22E
4400-8M-35E
4400-8M-60E
9307-0550
9307-1550
9307-2550
9307-3550
550
550
550
550
4400
4400
4400
4400
173.228
173.228
173.228
173.228
12
22
35
60
.472
.866
1.378
2.362
2.20
2.70
3.03
4.15
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Pitch
Length
(In.)
Belt
Width
(mm)
Belt Width
(In.)
Wt.
Ea.
(Lbs.)
994-14M-20E
994-14M-42E
994-14M-65E
994-14M-90E
994-14M-120E
1190-14M-20E
1190-14M-42E
1190-14M-65E
1190-14M-90E
1190-14M-120E
1400-14M-20E
1400-14M-42E
1400-14M-65E
1400-14M-90E
1400-14M-120E
1610-14M-20E
1610-14M-42E
1610-14M-65E
1610-14M-90E
1610-14M-120E
1750-14M-20E
1750-14M-42E
1750-14M-65E
1750-14M-90E
1750-14M-120E
1890-14M-20E
1890-14M-42E
1890-14M-65E
1890-14M-90E
1890-14M-120E
2100-14M-20E
2100-14M-42E
2100-14M-65E
2100-14M-90E
2100-14M-120E
2310-14M-20E
2310-14M-42E
2310-14M-65E
2310-14M-90E
2310-14M-120E
2450-14M-20E
2450-14M-42E
2450-14M-65E
2450-14M-90E
2450-14M-120E
2590-14M-20E
2590-14M-42E
2590-14M-65E
2590-14M-90E
2590-14M-120E
9307-4071
9307-5071
9307-6071
9307-7071
9307-8071
9307-4085
9307-5085
9307-6085
9307-7085
9307-8085
9307-4100
9307-5100
9307-6100
9307-7100
9307-8100
9307-4115
9307-5115
9307-6115
9307-7115
9307-8115
9307-4125
9307-5125
9307-6125
9307-7125
9307-8125
9307-4135
9307-5135
9307-6135
9307-7135
9307-8135
9307-4150
9307-5150
9307-6150
9307-7150
9307-8150
9307-4165
9307-5165
9307-6165
9307-7165
9307-8165
9307-4175
9307-5175
9307-6175
9307-7175
9307-8175
9307-4185
9307-5185
9307-6185
9307-7185
9307-8185
71
71
71
71
71
85
85
85
85
85
100
100
100
100
100
115
115
115
115
115
125
125
125
125
125
135
135
135
135
135
150
150
150
150
150
165
165
165
165
165
175
175
175
175
175
185
185
185
185
185
994
994
994
994
994
1190
1190
1190
1190
1190
1400
1400
1400
1400
1400
1610
1610
1610
1610
1610
1750
1750
1750
1750
1750
1890
1890
1890
1890
1890
2100
2100
2100
2100
2100
2310
2310
2310
2310
2310
2450
2450
2450
2450
2450
2590
2590
2590
2590
2590
39.130
39.130
39.130
39.130
39.130
46.850
46.850
46.850
46.850
46.850
55.118
55.118
55.118
55.118
55.118
63.386
63.386
63.386
63.386
63.386
68.898
68.898
68.898
68.898
68.898
74.409
74.409
74.409
74.409
74.409
82.677
82.677
82.677
82.677
82.677
90.945
90.945
90.945
90.945
90.945
96.457
96.457
96.457
96.457
96.457
101.968
101.968
101.968
101.968
101.968
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
1.50
1.80
2.40
3.10
3.60
1.68
2.00
2.70
3.40
4.00
1.82
2.20
2.90
3.80
4.40
1.90
2.40
3.30
4.44
5.27
2.00
2.60
3.40
4.66
5.56
2.10
2.70
3.60
4.88
5.85
2.20
2.90
3.90
5.20
6.29
2.35
3.10
4.25
5.53
6.72
2.40
3.25
4.45
5.74
7.00
2.50
3.40
4.60
5.96
7.30
ELIMINATOR BELTS
14mm Pitch
14
gates.com/pt
Gates Corporation
®
June 2012
Eliminator® Belts
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Pitch
Length
(In.)
Belt
Width
(mm)
Belt Width
(In.)
Wt.
Ea.
(Lbs.)
2800-14M-20E
2800-14M-42E
2800-14M-65E
2800-14M-90E
2800-14M-120E
3136-14M-20E
3136-14M-42E
3136-14M-65E
3136-14M-90E
3136-14M-120E
3360-14M-20E
3360-14M-42E
3360-14M-65E
3360-14M-90E
3360-14M-120E
3500-14M-20E
3500-14M-42E
3500-14M-65E
3500-14M-90E
3500-14M-120E
3850-14M-20E
3850-14M-42E
3850-14M-65E
3850-14M-90E
3850-14M-120E
4326-14M-20E
4326-14M-42E
4326-14M-65E
4326-14M-90E
4326-14M-120E
9307-4200
9307-5200
9307-6200
9307-7200
9307-8200
9307-4224
9307-5224
9307-6224
9307-7224
9307-8224
9307-4240
9307-5240
9307-6240
9307-7240
9307-8240
9307-4250
9307-5250
9307-6250
9307-7250
9307-8250
9307-4275
9307-5275
9307-6275
9307-7275
9307-8275
9307-4309
9307-5309
9307-6309
9307-7309
9307-8309
200
200
200
200
200
224
224
224
224
224
240
240
240
240
240
250
250
250
250
250
275
275
275
275
275
309
309
309
309
309
2800
2800
2800
2800
2800
3136
3136
3136
3136
3136
3360
3360
3360
3360
3360
3500
3500
3500
3500
3500
3850
3850
3850
3850
3850
4326
4326
4326
4326
4326
110.236
110.236
110.236
110.236
110.236
123.465
123.465
123.465
123.465
123.465
132.283
132.283
132.283
132.283
132.283
137.795
137.795
137.795
137.795
137.795
151.575
151.575
151.575
151.575
151.575
170.315
170.315
170.315
170.315
170.315
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
20
42
65
90
120
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
.787
1.654
2.559
3.543
4.724
2.63
3.60
4.95
6.29
7.73
2.84
3.92
5.46
6.81
8.34
2.96
4.10
5.71
7.16
8.89
3.05
4.30
5.95
7.37
9.18
3.25
4.60
6.50
7.92
9.91
3.55
5.10
7.20
8.80
10.80
®
Powering Progress.
gates.com/pt
ELIMINATOR BELTS
Part
No.
15
June 2012
PowerGrip® TruMotion Belts
The new PowerGrip TruMotion belts are available in all of
Gates light duty synchronous pitches.
PowerGrip GT TruMotion Belts: 2MR, 3MR and 5MR
PowerGrip TruMotion Belts: 3M and 5M
PowerGrip Timing Belts: MXL, XL and L
PowerGrip TruMotion Belts are made to order. Please contact
customer service for price and availability.
The TruMotion belt construction utilizes a clean white polymer
and a polymer free nylon tooth surface, resulting in minimal
dusting. This makes it ideal for many applications including
data storage equipment, printers, plotters, medical equipment,
food processors, money handling, copiers and other office
equipment.
Features/Advantages
n Fiberglass tensile cord provides excellent flex life, and high resistance to elongation.
n The white polymer rubber body provides a non marking, cleaner running construction
n The polymer free nylon tooth facing provides a durable wear surface for longer service life and lower noise
levels.
PowerGrip GT TruMotion Belts: PowerGrip GT2 Sprockets
PowerGrip HTD TruMotion Belts: PowerGrip HTD Sprockets
PowerGrip Timing TruMotion Belts: PowerGrip Timing Pulleys
Notes
PowerGrip TruMotion belts are made-to-order. Minimum order quantities of 3 drums will be required. Check with Customer Service for
availability.
PowerGrip® GT® TruMotion® Belts
Available Pitches
POWERGRIP TRUMOTION
2MR
3MR
5MR
PowerGrip® Timing TruMotion® Belts
Available Pitches
MXL
XL
L
PowerGrip® HTD® TruMotion® Belts
Available Pitches
3M
5M
16
gates.com/pt
Gates Corporation
®
June 2012
PowerGrip® GT®2 Belts - 2MR and 3MR
The PowerGrip GT2 belt has twice the load carrying capacity of its
predecessor HTD®. In addition, less width is required compared to
HTD, allowing lighter, more compact drives.
PowerGrip GT2 belts are suitable for many applications including
data storage, machine tool, hand power tools, postage handling, DC
Stepper/Servo, food processors, office machines, centrifuges,
money handling, medical diagnostic, sewing machines, ticket
dispensers, robotics, vending machines and vacuum cleaners.
Features/Advantages
n Fiberglass tensile cord provides high strength, excellent flex life,
and high resistance to elongation.
n Neoprene body provides protection against grime, grease, oil, and
moisture.
n Nylon tooth facing provides a durable wear surface for long service life.
n Gates patented tooth profile is designed for use with a specific sprocket groove profile. The sprocket
groove-belt tooth combination increases capacity, while improving registration.
n PowerGrip GT2 greatly exceeds HTD in tooth ratchet resistance.
n Eliminates lubrication and re-tensioning reduce maintenance and labor as compared to roller chain drives.
n PowerGrip GT2 belt sprocket combinations match or exceed the positional accuracy of PowerGrip Timing
belt/pulley systems.
PowerGrip GT2 Sprockets
Notes
PowerGrip GT2 part numbers are comprised of pitch, pitch length and width. For example; part number 2MR-100-04 denotes a 2mm pitch,
total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a PowerGrip GT2 belt lies within the
tensile member.
2MR Pitch — 4mm Wide
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2MR-100-04
2MR-112-04
2MR-124-04
2MR-126-04
2MR-134-04
2MR-136-04
2MR-140-04
2MR-152-04
2MR-158-04
2MR-160-04
2MR-164-04
2MR-166-04
2MR-168-04
2MR-172-04
2MR-180-04
2MR-186-04
2MR-192-04
2MR-200-04
2MR-202-04
2MR-210-04
2MR-212-04
2MR-216-04
2MR-220-04
2MR-232-04
2MR-236-04
9390-0050
9390-0056
9390-0062
9390-0063
9390-0067
9390-0068
9390-0070
9390-0076
9390-0079
9390-0080
9390-0082
9390-0083
9390-0084
9390-0086
9390-0090
9390-0093
9390-0096
9390-0100
9390-0101
9390-0105
9390-0106
9390-0108
9390-0110
9390-0116
9390-0118
50
56
62
63
67
68
70
76
79
80
82
83
84
86
90
93
96
100
101
105
106
108
110
116
118
3.94
4.41
4.88
4.96
5.28
5.35
5.51
5.98
6.22
6.30
6.46
6.54
6.61
6.77
7.09
7.32
7.56
7.87
7.95
8.27
8.35
8.50
8.66
9.13
9.29
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
2MR-240-04
2MR-250-04
2MR-252-04
2MR-258-04
2MR-278-04
2MR-280-04
2MR-300-04
2MR-320-04
2MR-322-04
2MR-332-04
2MR-346-04
2MR-350-04
2MR-364-04
2MR-370-04
2MR-380-04
2MR-386-04
2MR-400-04
2MR-406-04
2MR-420-04
2MR-456-04
2MR-470-04
2MR-474-04
2MR-488-04
2MR-504-04
2MR-528-04
9390-0120
9390-0125
9390-0126
9390-0129
9390-0139
9390-0140
9390-0150
9390-0160
9390-0161
9390-0166
9390-0173
9390-0175
9390-0182
9390-0185
9390-0190
9390-0193
9390-0200
9390-0203
9390-0210
9390-0228
9390-0235
9390-0237
9390-0244
9390-0252
9390-0264
120
125
126
129
139
140
150
160
161
166
173
175
182
185
190
193
200
203
210
228
235
237
244
252
264
9.45
9.84
9.92
10.16
10.94
11.02
11.81
12.60
12.68
13.07
13.62
13.78
14.33
14.57
14.96
15.20
15.75
15.98
16.54
17.95
18.50
18.66
19.21
19.84
20.79
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
®
Powering Progress.
gates.com/pt
POWERGRIP GT2 BELTS
Part
No.
17
June 2012
2MR Pitch — 4mm Wide (continued)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2MR-552-04
2MR-576-04
2MR-600-04
2MR-640-04
9390-0276
9390-0288
9390-0300
9390-0320
276
288
300
320
21.73
22.68
23.62
25.20
.01
.01
.01
.02
2MR-696-04
2MR-744-04
2MR-848-04
2MR-1164-04
9390-0348
9390-0372
9390-0424
9390-0582
348
372
424
582
27.40
29.29
33.39
45.83
.02
.02
.02
.03
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2MR-100-06
2MR-112-06
2MR-124-06
2MR-126-06
2MR-134-06
2MR-136-06
2MR-140-06
2MR-152-06
2MR-158-06
2MR-160-06
2MR-164-06
2MR-166-06
2MR-168-06
2MR-172-06
2MR-180-06
2MR-186-06
2MR-192-06
2MR-200-06
2MR-202-06
2MR-210-06
2MR-212-06
2MR-216-06
2MR-220-06
2MR-232-06
2MR-236-06
2MR-240-06
2MR-250-06
2MR-252-06
2MR-258-06
9390-1050
9390-1056
9390-1062
9390-1063
9390-1067
9390-1068
9390-1070
9390-1076
9390-1079
9390-1080
9390-1082
9390-1083
9390-1084
9390-1086
9390-1090
9390-1093
9390-1096
9390-1100
9390-1101
9390-1105
9390-1106
9390-1108
9390-1110
9390-1116
9390-1118
9390-1120
9390-1125
9390-1126
9390-1129
50
56
62
63
67
68
70
76
79
80
82
83
84
86
90
93
96
100
101
105
106
108
110
116
118
120
125
126
129
3.94
4.41
4.88
4.96
5.28
5.35
5.51
5.98
6.22
6.30
6.46
6.54
6.61
6.77
7.09
7.32
7.56
7.87
7.95
8.27
8.35
8.50
8.66
9.13
9.29
9.45
9.84
9.92
10.16
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
2MR-278-06
2MR-280-06
2MR-300-06
2MR-320-06
2MR-322-06
2MR-332-06
2MR-346-06
2MR-350-06
2MR-364-06
2MR-370-06
2MR-380-06
2MR-386-06
2MR-400-06
2MR-406-06
2MR-420-06
2MR-456-06
2MR-470-06
2MR-474-06
2MR-488-06
2MR-504-06
2MR-528-06
2MR-552-06
2MR-576-06
2MR-600-06
2MR-640-06
2MR-696-06
2MR-744-06
2MR-848-06
2MR-1164-06
9390-1139
9390-1140
9390-1150
9390-1160
9390-1161
9390-1166
9390-1173
9390-1175
9390-1182
9390-1185
9390-1190
9390-1193
9390-1200
9390-1203
9390-1210
9390-1228
9390-1235
9390-1237
9390-1244
9390-1252
9390-1264
9390-1276
9390-1288
9390-1300
9390-1320
9390-1348
9390-1372
9390-1424
9390-1582
139
140
150
160
161
166
173
175
182
185
190
193
200
203
210
228
235
237
244
252
264
276
288
300
320
348
372
424
582
10.94
11.02
11.81
12.60
12.68
13.07
13.62
13.78
14.33
14.57
14.96
15.20
15.75
15.98
16.54
17.95
18.50
18.66
19.21
19.84
20.79
21.73
22.68
23.62
25.20
27.40
29.29
33.39
45.83
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.02
.02
.02
.03
.03
.04
POWERGRIP GT2 BELTS
18
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2MR-100-09
2MR-112-09
2MR-124-09
2MR-126-09
2MR-134-09
2MR-136-09
2MR-140-09
2MR-152-09
2MR-158-09
2MR-160-09
2MR-164-09
2MR-166-09
2MR-168-09
2MR-172-09
2MR-180-09
2MR-186-09
2MR-192-09
2MR-200-09
9390-2050
9390-2056
9390-2062
9390-2063
9390-2067
9390-2068
9390-2070
9390-2076
9390-2079
9390-2080
9390-2082
9390-2083
9390-2084
9390-2086
9390-2090
9390-2093
9390-2096
9390-2100
50
56
62
63
67
68
70
76
79
80
82
83
84
86
90
93
96
100
3.94
4.41
4.88
4.96
5.28
5.35
5.51
5.98
6.22
6.30
6.46
6.54
6.61
6.77
7.09
7.32
7.56
7.87
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
2MR-202-09
2MR-210-09
2MR-212-09
2MR-216-09
2MR-220-09
2MR-232-09
2MR-236-09
2MR-240-09
2MR-250-09
2MR-252-09
2MR-258-09
2MR-278-09
2MR-280-09
2MR-300-09
2MR-320-09
2MR-322-09
2MR-332-09
2MR-346-09
9390-2101
9390-2105
9390-2106
9390-2108
9390-2110
9390-2116
9390-2118
9390-2120
9390-2125
9390-2126
9390-2129
9390-2139
9390-2140
9390-2150
9390-2160
9390-2161
9390-2166
9390-2173
101
105
106
108
110
116
118
120
125
126
129
139
140
150
160
161
166
173
7.95
8.27
8.35
8.50
8.66
9.13
9.29
9.45
9.84
9.92
10.16
10.94
11.02
11.81
12.60
12.68
13.07
13.62
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
gates.com/pt
Gates Corporation
®
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2MR-350-09
2MR-364-09
2MR-370-09
2MR-380-09
2MR-386-09
2MR-400-09
2MR-406-09
2MR-420-09
2MR-456-09
2MR-470-09
2MR-474-09
9390-2175
9390-2182
9390-2185
9390-2190
9390-2193
9390-2200
9390-2203
9390-2210
9390-2228
9390-2235
9390-2237
175
182
185
190
193
200
203
210
228
235
237
13.78
14.33
14.57
14.96
15.20
15.75
15.98
16.54
17.95
18.50
18.66
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
2MR-488-09
2MR-504-09
2MR-528-09
2MR-552-09
2MR-576-09
2MR-600-09
2MR-640-09
2MR-696-09
2MR-744-09
2MR-848-09
2MR-1164-09
9390-2244
9390-2252
9390-2264
9390-2276
9390-2288
9390-2300
9390-2320
9390-2348
9390-2372
9390-2424
9390-2582
244
252
264
276
288
300
320
348
372
424
582
19.21
19.84
20.79
21.73
22.68
23.62
25.20
27.40
29.29
33.39
45.83
.02
.02
.02
.02
.02
.03
.03
.03
.03
.04
.04
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
3MR-99-06
3MR-111-06
3MR-123-06
3MR-129-06
3MR-159-06
3MR-165-06
3MR-180-06
3MR-183-06
3MR-189-06
3MR-201-06
3MR-219-06
3MR-225-06
3MR-240-06
3MR-243-06
3MR-255-06
3MR-267-06
3MR-282-06
3MR-291-06
3MR-300-06
3MR-339-06
3MR-348-06
3MR-357-06
3MR-360-06
3MR-375-06
3MR-393-06
9390-3033
9390-3037
9390-3041
9390-3043
9390-3053
9390-3055
9390-3060
9390-3061
9390-3063
9390-3067
9390-3073
9390-3075
9390-3080
9390-3081
9390-3085
9390-3089
9390-3094
9390-3097
9390-3100
9390-3113
9390-3116
9390-3119
9390-3120
9390-3125
9390-3131
33
37
41
43
53
55
60
61
63
67
73
75
80
81
85
89
94
97
100
113
116
119
120
125
131
3.90
4.37
4.84
5.08
6.26
6.50
7.09
7.20
7.44
7.91
8.62
8.86
9.45
9.57
10.04
10.51
11.10
11.46
11.81
13.35
13.70
14.06
14.17
14.76
15.47
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
3MR-414-06
3MR-420-06
3MR-447-06
3MR-450-06
3MR-474-06
3MR-480-06
3MR-483-06
3MR-489-06
3MR-504-06
3MR-537-06
3MR-552-06
3MR-564-06
3MR-600-06
3MR-630-06
3MR-684-06
3MR-735-06
3MR-750-06
3MR-786-06
3MR-840-06
3MR-945-06
3MR-1050-06
3MR-1080-06
3MR-1536-06
3MR-1587-06
3MR-2061-06
9390-3138
9390-3140
9390-3149
9390-3150
9390-3158
9390-3160
9390-3161
9390-3163
9390-3168
9390-3179
9390-3184
9390-3188
9390-3200
9390-3210
9390-3228
9390-3245
9390-3250
9390-3262
9390-3280
9390-3315
9390-3350
9390-3360
9390-3512
9390-3529
9390-3687
138
140
149
150
158
160
161
163
168
179
184
188
200
210
228
245
250
262
280
315
350
360
512
529
687
16.30
16.54
17.60
17.72
18.66
18.90
19.02
19.25
19.84
21.14
21.73
22.20
23.62
24.80
26.93
28.94
29.53
30.94
33.07
37.20
41.34
42.52
60.47
62.48
81.14
.01
.01
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.06
.06
.07
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
33
37
41
43
53
55
60
61
63
67
73
75
80
81
85
3.90
4.37
4.84
5.08
6.26
6.50
7.09
7.20
7.44
7.91
8.62
8.86
9.45
9.57
10.04
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
3MR-267-09
3MR-282-09
3MR-291-09
3MR-300-09
3MR-339-09
3MR-348-09
3MR-357-09
3MR-360-09
3MR-375-09
3MR-393-09
3MR-414-09
3MR-420-09
3MR-447-09
3MR-450-09
3MR-474-09
9390-4089
9390-4094
9390-4097
9390-4100
9390-4113
9390-4116
9390-4119
9390-4120
9390-4125
9390-4131
9390-4138
9390-4140
9390-4149
9390-4150
9390-4158
89
94
97
100
113
116
119
120
125
131
138
140
149
150
158
10.51
11.10
11.46
11.81
13.35
13.70
14.06
14.17
14.76
15.47
16.30
16.54
17.60
17.72
18.66
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.02
.02
.02
.02
.02
Product
No.
3MR-99-09
3MR-111-09
3MR-123-09
3MR-129-09
3MR-159-09
3MR-165-09
3MR-180-09
3MR-183-09
3MR-189-09
3MR-201-09
3MR-219-09
3MR-225-09
3MR-240-09
3MR-243-09
3MR-255-09
9390-4033
9390-4037
9390-4041
9390-4043
9390-4053
9390-4055
9390-4060
9390-4061
9390-4063
9390-4067
9390-4073
9390-4075
9390-4080
9390-4081
9390-4085
®
Powering Progress.
gates.com/pt
POWERGRIP GT2 BELTS
Part
No.
19
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
3MR-480-09
3MR-483-09
3MR-489-09
3MR-504-09
3MR-537-09
3MR-552-09
3MR-564-09
3MR-600-09
3MR-630-09
3MR-684-09
9390-4160
9390-4161
9390-4163
9390-4168
9390-4179
9390-4184
9390-4188
9390-4200
9390-4210
9390-4228
160
161
163
168
179
184
188
200
210
228
18.90
19.02
19.25
19.84
21.14
21.73
22.20
23.62
24.80
26.93
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
3MR-735-09
3MR-750-09
3MR-786-09
3MR-840-09
3MR-945-09
3MR-1050-09
3MR-1080-09
3MR-1536-09
3MR-1587-09
3MR-2061-09
9390-4245
9390-4250
9390-4262
9390-4280
9390-4315
9390-4350
9390-4360
9390-4512
9390-4529
9390-4687
245
250
262
280
315
350
360
512
529
687
28.94
29.53
30.94
33.07
37.20
41.34
42.52
60.47
62.48
81.14
.03
.04
.04
.04
.04
.05
.05
.07
.08
.10
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
3MR-99-15
3MR-111-15
3MR-123-15
3MR-129-15
3MR-159-15
3MR-165-15
3MR-180-15
3MR-183-15
3MR-189-15
3MR-201-15
3MR-219-15
3MR-225-15
3MR-240-15
3MR-243-15
3MR-255-15
3MR-267-15
3MR-282-15
3MR-291-15
3MR-300-15
3MR-339-15
3MR-348-15
3MR-357-15
3MR-360-15
3MR-375-15
3MR-393-15
9390-5033
9390-5037
9390-5041
9390-5043
9390-5053
9390-5055
9390-5060
9390-5061
9390-5063
9390-5067
9390-5073
9390-5075
9390-5080
9390-5081
9390-5085
9390-5089
9390-5094
9390-5097
9390-5100
9390-5113
9390-5116
9390-5119
9390-5120
9390-5125
9390-5131
33
37
41
43
53
55
60
61
63
67
73
75
80
81
85
89
94
97
100
113
116
119
120
125
131
3.90
4.37
4.84
5.08
6.26
6.50
7.09
7.20
7.44
7.91
8.62
8.86
9.45
9.57
10.04
10.51
11.10
11.46
11.81
13.35
13.70
14.06
14.17
14.76
15.47
.01
.01
.01
.02
.02
.01
.02
.02
.01
.02
.01
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.03
3MR-414-15
3MR-420-15
3MR-447-15
3MR-450-15
3MR-474-15
3MR-480-15
3MR-483-15
3MR-489-15
3MR-504-15
3MR-537-15
3MR-552-15
3MR-564-15
3MR-600-15
3MR-630-15
3MR-684-15
3MR-735-15
3MR-750-15
3MR-786-15
3MR-840-15
3MR-945-15
3MR-1050-15
3MR-1080-15
3MR-1536-15
3MR-1587-15
3MR-2061-15
9390-5138
9390-5140
9390-5149
9390-5150
9390-5158
9390-5160
9390-5161
9390-5163
9390-5168
9390-5179
9390-5184
9390-5188
9390-5200
9390-5210
9390-5228
9390-5245
9390-5250
9390-5262
9390-5280
9390-5315
9390-5350
9390-5360
9390-5512
9390-5529
9390-5687
138
140
149
150
158
160
161
163
168
179
184
188
200
210
228
245
250
262
280
315
350
360
512
529
687
16.30
16.54
17.60
17.72
18.66
18.90
19.02
19.25
19.84
21.14
21.73
22.20
23.62
24.80
26.93
28.94
29.53
30.94
33.07
37.20
41.34
42.52
60.47
62.48
81.14
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.06
.07
.07
.07
.07
.08
.10
.10
.14
.15
.20
POWERGRIP GT2 BELTS
Part
No.
20
gates.com/pt
Gates Corporation
®
June 2012
PowerGrip® GT®2 Belts - 5MR
The highest density 5mm rubber belt, the PowerGrip GT2 belt has
twice the load carrying capacity of its predecessor HTD®. In addition,
less width is required compared to HTD, allowing lighter, more
compact drives.
PowerGrip GT2 belts are suitable for many applications such as
HVAC, office machines, machine tools, hand power tools, postage
handling, spindle drives, food processors, sewing machines,
robotics, linear and light package conveyor.
Features/Advantages
n Neoprene body provides protection against grime, grease, oil, and
moisture.
n PowerGrip GT2 has more tooth ratchet resistance than HTD.
n PowerGrip GT2 belt/sprocket combinations match or exceed the positional accuracy of PowerGrip Timing
PowerGrip GT2 and Poly Chain® GT®
Notes
PowerGrip GT2 part numbers are comprised of pitch, pitch length and width. For example; part number 5MR-400-09 denotes a 5mm pitch,
tensile member.
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5MR-300-09
5MR-355-09
5MR-375-09
5MR-400-09
5MR-405-09
5MR-425-09
5MR-450-09
5MR-500-09
5MR-535-09
5MR-565-09
5MR-575-09
5MR-580-09
5MR-600-09
5MR-625-09
5MR-650-09
9390-6060
9390-6071
9390-6075
9390-6080
9390-6081
9390-6085
9390-6090
9390-6100
9390-6107
9390-6113
9390-6115
9390-6116
9390-6120
9390-6125
9390-6130
60
71
75
80
81
85
90
100
107
113
115
116
120
125
130
11.81
13.98
14.76
15.75
15.95
16.73
17.72
19.69
21.06
22.24
22.64
22.83
23.62
24.61
25.59
.02
.02
.02
.03
.03
.03
.03
.04
.04
.04
.04
.05
.05
.05
.05
5MR-700-09
5MR-750-09
5MR-800-09
5MR-815-09
5MR-850-09
5MR-900-09
5MR-1000-09
5MR-1150-09
5MR-1300-09
5MR-1450-09
5MR-1600-09
5MR-1720-09
5MR-1755-09
5MR-2100-09
9390-6140
9390-6150
9390-6160
9390-6163
9390-6170
9390-6180
9390-6200
9390-6230
9390-6260
9390-6290
9390-6320
9390-6344
9390-6351
9390-6420
140
150
160
163
170
180
200
230
260
290
320
344
351
420
27.56
29.53
31.50
32.09
33.46
35.43
39.37
45.28
51.18
57.09
62.99
67.72
69.09
82.67
.05
.06
.06
.06
.06
.07
.07
.08
.10
.11
.12
.13
.13
.16
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
60
71
75
80
81
11.81
13.98
14.76
15.75
15.95
.04
.04
.05
.05
.05
5MR-425-15
5MR-450-15
5MR-500-15
5MR-535-15
5MR-565-15
9390-7085
9390-7090
9390-7100
9390-7107
9390-7113
85
90
100
107
113
16.73
17.72
19.69
21.06
22.24
.05
.06
.06
.07
.07
Product
No.
5MR-300-15
5MR-355-15
5MR-375-15
5MR-400-15
5MR-405-15
9390-7060
9390-7071
9390-7075
9390-7080
9390-7081
®
Powering Progress.
gates.com/pt
POWERGRIP GT2 BELTS
Part
No.
21
June 2012
PowerGrip® GT®2 Belts - 5MR
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5MR-575-15
5MR-580-15
5MR-600-15
5MR-625-15
5MR-650-15
5MR-700-15
5MR-750-15
5MR-800-15
5MR-815-15
5MR-850-15
9390-7115
9390-7116
9390-7120
9390-7125
9390-7130
9390-7140
9390-7150
9390-7160
9390-7163
9390-7170
115
116
120
125
130
140
150
160
163
170
22.64
22.83
23.62
24.61
25.59
27.56
29.53
31.50
32.09
33.46
.07
.07
.07
.07
.10
.10
.10
.10
.10
.10
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5MR-900-15
5MR-1000-15
5MR-1150-15
5MR-1300-15
5MR-1450-15
5MR-1600-15
5MR-1720-15
5MR-1755-15
5MR-2100-15
9390-7180
9390-7200
9390-7230
9390-7260
9390-7290
9390-7320
9390-7344
9390-7351
9390-7420
180
200
230
260
290
320
344
351
420
35.43
39.37
45.28
51.18
57.09
62.99
67.72
69.09
82.68
.10
.13
.15
.17
.19
.20
.22
.22
.27
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5MR-700-25
5MR-750-25
5MR-800-25
5MR-815-25
5MR-850-25
5MR-900-25
5MR-1000-25
5MR-1150-25
5MR-1300-25
5MR-1450-25
5MR-1600-25
5MR-1720-25
5MR-1755-25
5MR-2100-25
9390-8140
9390-8150
9390-8160
9390-8163
9390-8170
9390-8180
9390-8200
9390-8230
9390-8260
9390-8290
9390-8320
9390-8344
9390-8351
9390-8420
140
150
160
163
170
180
200
230
260
290
320
344
351
420
27.56
29.53
31.50
32.09
33.46
35.43
39.37
45.28
51.18
57.09
62.99
67.72
69.09
82.68
.15
.15
.15
.20
.20
.20
.20
.25
.30
.35
.37
.40
.50
.53
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5MR-300-25
5MR-355-25
5MR-375-25
5MR-400-25
5MR-405-25
5MR-425-25
5MR-450-25
5MR-500-25
5MR-535-25
5MR-565-25
5MR-575-25
5MR-580-25
5MR-600-25
5MR-625-25
5MR-650-25
9390-8060
9390-8071
9390-8075
9390-8080
9390-8081
9390-8085
9390-8090
9390-8100
9390-8107
9390-8113
9390-8115
9390-8116
9390-8120
9390-8125
9390-8130
60
71
75
80
81
85
90
100
107
113
115
116
120
125
130
11.81
13.98
14.76
15.75
15.95
16.73
17.72
19.69
21.06
22.24
22.64
22.83
23.62
24.61
25.59
.07
.07
.07
.07
.08
.07
.10
.10
.10
.10
.10
.10
.10
.10
.15
POWERGRIP GT2 BELTS
Part
No.
22
gates.com/pt
Gates Corporation
®
June 2012
PowerGrip® GT®2 Belts - 8M and 14M
Reduce both acquisition costs and transaction costs by designing
with PowerGrip GT2. The PowerGrip GT2 belt has two times the
rating of competitive RPP® belts, and its predecessors PowerGrip
GT and HTD® belts. PowerGrip GT2 drive systems offer the largest
selection of belts and sprockets in the industry. At reduced widths,
PowerGrip GT2 belts can be used as a direct replacement for most
8mm and 14mm pitch standard rubber RPP® and HTD synchronous
belts.
PowerGrip GT2 belts are suitable for many applications such as
HVAC, textile, printing, machine tools, food processing, conveyors,
packaging, agriculture, pumps, compressors, centrifuges, laundry,
pulp and paper.
Features/Advantages
n Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation.
n Neoprene body provides protection against grime, grease, oil, and moisture.
n PowerGrip GT2 has more tooth ratchet resistance than HTD
n PowerGrip GT2 ACHE belts are available in 14mm pitch. A single twist cord helps prevent the belt from moving
downward on vertical shaft ACHE applications.
Notes
8M and 14M PowerGrip GT2 belts are conductive in accordance with ISO 9563. When belt drive systems are located in potentially
hazardous environments, safe and reliable dissipation of electrostatic charges is critical - a secondary means of dissipation such as static
grounding brushes is recommended.
PowerGrip GT2 part numbers are comprised of pitch, pitch length and width. For example; part number 3150-14MGT-55 denotes a 3150mm
pitch length, 14mm pitch and 55mm width.
tensile member.
WARNING: New drive designs must use the PowerGrip GT2 sprockets, because of the high torque capacity of PowerGrip GT2 belts.
Do not use HTD or RPP® profiled sprockets in new designs. PowerGrip GT2 belts can be used on existing HTD or HT100® sprockets as
replacement belts, usually at the next narrowest width.
8mm Pitch — 12mm Wide 12mm wide PGGT2 belts do NOT meet ISO and ARPM static conductivity standards.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
384-8MGT-12
480-8MGT-12
560-8MGT-12
600-8MGT-12
640-8MGT-12
720-8MGT-12
800-8MGT-12
840-8MGT-12
880-8MGT-12
920-8MGT-12
960-8MGT-12
1040-8MGT-12
1064-8MGT-12
1104-8MGT-12
1120-8MGT-12
1160-8MGT-12
9207-1200
9207-1201
9207-1202
9207-1203
9207-1204
9207-1205
9207-1206
9207-1207
9207-1208
9207-1209
9207-1210
9207-1211
9207-1212
9207-1213
9207-1214
9207-1215
48
60
70
75
80
90
100
105
110
115
120
130
133
138
140
145
15.12
18.90
22.05
23.62
25.20
28.35
31.50
33.07
34.65
36.22
37.80
40.94
41.89
43.46
44.09
45.67
.05
.06
.07
.08
.08
.09
.10
.11
.11
.12
.12
.13
.14
.14
.15
.15
®
Powering Progress.
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
1200-8MGT-12
1224-8MGT-12
1280-8MGT-12
1440-8MGT-12
1512-8MGT-12
1584-8MGT-12
1600-8MGT-12
1760-8MGT-12
1800-8MGT-12
2000-8MGT-12
2200-8MGT-12
2400-8MGT-12
2600-8MGT-12
2800-8MGT-12
3280-8MGT-12
9207-1216
9207-1217
9207-1218
9207-1219
9207-1220
9207-1221
9207-1222
9207-1223
9207-1224
9207-1225
9207-1226
9207-1227
9207-1228
9207-1229
9207-1230
150
153
160
180
189
198
200
220
225
250
275
300
325
350
410
47.24
48.19
50.39
56.69
59.53
62.36
62.99
69.29
70.87
78.74
86.61
94.49
102.36
110.24
129.13
.15
.16
.16
.18
.19
.20
.20
.22
.23
.25
.28
.30
.33
.35
.41
gates.com/pt
POWERGRIP GT2 BELTS
Part
No.
23
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
384-8MGT-20
480-8MGT-20
560-8MGT-20
600-8MGT-20
640-8MGT-20
720-8MGT-20
800-8MGT-20
840-8MGT-20
880-8MGT-20
920-8MGT-20
960-8MGT-20
1040-8MGT-20
1064-8MGT-20
1104-8MGT-20
1120-8MGT-20
1160-8MGT-20
1200-8MGT-20
9207-1021
9207-0001
9207-0005
9207-0009
9207-0013
9207-0017
9207-0021
9207-1025
9207-0025
9207-1001
9207-0029
9207-0033
9207-1005
9207-1037
9207-0037
9207-1009
9207-0041
48
60
70
75
80
90
100
105
110
115
120
130
133
138
140
145
150
15.12
18.90
22.05
23.62
25.20
28.35
31.50
33.07
34.65
36.22
37.80
40.94
41.89
43.46
44.09
45.67
47.24
.09
.11
.15
.15
.16
.19
.20
.20
.20
.20
.20
.25
.25
.25
.25
.25
.30
1224-8MGT-20
1280-8MGT-20
1440-8MGT-20
1512-8MGT-20
1584-8MGT-20
1600-8MGT-20
1760-8MGT-20
1800-8MGT-20
2000-8MGT-20
2200-8MGT-20
2400-8MGT-20
2600-8MGT-20
2800-8MGT-20
3048-8MGT-20
3280-8MGT-20
3600-8MGT-20
4400-8MGT-20
9207-1029
9207-0045
9207-0049
9207-1013
9207-1017
9207-0053
9207-0057
9207-0061
9207-0065
9207-1033
9207-0069
9207-0077
9207-0073
9207-0081
9207-0085
9207-0089
9207-0093
153
160
180
189
198
200
220
225
250
275
300
325
350
381
410
450
550
48.19
50.39
56.69
59.53
62.36
62.99
69.29
70.87
78.74
86.62
94.49
102.36
110.24
120.00
129.13
141.73
173.23
.30
.30
.35
.37
.39
.40
.45
.45
.51
.55
.60
.65
.70
.75
.84
.95
1.15
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
384-8MGT-30
480-8MGT-30
560-8MGT-30
600-8MGT-30
640-8MGT-30
720-8MGT-30
800-8MGT-30
840-8MGT-30
880-8MGT-30
920-8MGT-30
960-8MGT-30
1040-8MGT-30
1064-8MGT-30
1104-8MGT-30
1120-8MGT-30
1160-8MGT-30
1200-8MGT-30
9207-1022
9207-0002
9207-0006
9207-0010
9207-0014
9207-0018
9207-0022
9207-1026
9207-0026
9207-1002
9207-0030
9207-0034
9207-1006
9207-1038
9207-0038
9207-1010
9207-0042
48
60
70
75
80
90
100
105
110
115
120
130
133
138
140
145
150
15.12
18.90
22.05
23.62
25.20
28.35
31.50
33.07
34.65
36.22
37.80
40.94
41.89
43.46
44.09
45.67
47.24
.15
.20
.20
.21
.24
.25
.25
.30
.30
.35
.35
.35
.40
.46
.40
.45
.45
1224-8MGT-30
1280-8MGT-30
1440-8MGT-30
1512-8MGT-30
1584-8MGT-30
1600-8MGT-30
1760-8MGT-30
1800-8MGT-30
2000-8MGT-30
2200-8MGT-30
2400-8MGT-30
2600-8MGT-30
2800-8MGT-30
3048-8MGT-30
3280-8MGT-30
3600-8MGT-30
4400-8MGT-30
9207-1030
9207-0046
9207-0050
9207-1014
9207-1018
9207-0054
9207-0058
9207-0062
9207-0066
9207-1034
9207-0070
9207-0078
9207-0074
9207-0082
9207-0086
9207-0090
9207-0094
153
160
180
189
198
200
220
225
250
275
300
325
350
381
410
450
550
48.19
50.39
56.69
59.53
62.36
62.99
69.29
70.87
78.74
86.61
94.49
102.36
110.24
120.00
129.13
141.73
173.23
.45
.45
.52
.55
.60
.60
.65
.65
.70
.80
.88
.92
1.00
1.20
1.16
1.28
1.70
POWERGRIP GT2 BELTS
24
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
384-8MGT-50
480-8MGT-50
560-8MGT-50
600-8MGT-50
640-8MGT-50
720-8MGT-50
800-8MGT-50
840-8MGT-50
880-8MGT-50
920-8MGT-50
960-8MGT-50
1040-8MGT-50
1064-8MGT-50
1104-8MGT-50
1120-8MGT-50
1160-8MGT-50
1200-8MGT-50
9207-1023
9207-0003
9207-0007
9207-0011
9207-0015
9207-0019
9207-0023
9207-1027
9207-0027
9207-1003
9207-0031
9207-0035
9207-1007
9207-1039
9207-0039
9207-1011
9207-0043
48
60
70
75
80
90
100
105
110
115
120
130
133
138
140
145
150
15.12
18.90
22.05
23.62
25.20
28.35
31.50
33.07
34.65
36.22
37.80
40.94
41.89
43.46
44.09
45.67
47.24
.20
.30
.32
.35
.40
.45
.50
.50
.55
.60
.60
.65
.65
.65
.65
.70
.75
1224-8MGT-50
1280-8MGT-50
1440-8MGT-50
1512-8MGT-50
1584-8MGT-50
1600-8MGT-50
1760-8MGT-50
1800-8MGT-50
2000-8MGT-50
2200-8MGT-50
2400-8MGT-50
2600-8MGT-50
2800-8MGT-50
3048-8MGT-50
3280-8MGT-50
3600-8MGT-50
4400-8MGT-50
9207-1031
9207-0047
9207-0051
9207-1015
9207-1019
9207-0055
9207-0059
9207-0063
9207-0067
9207-1035
9207-0071
9207-0079
9207-0075
9207-0083
9207-0087
9207-0091
9207-0095
153
160
180
189
198
200
220
225
250
275
300
325
350
381
410
450
550
48.19
50.39
56.69
59.53
62.36
62.99
69.29
70.87
78.74
86.61
94.49
102.36
110.24
120.00
129.13
141.73
173.23
.75
.75
.90
.95
1.00
1.00
1.10
1.10
1.30
1.35
1.50
1.60
1.70
1.90
2.00
2.35
2.75
gates.com/pt
Gates Corporation
®
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
384-8MGT-85
480-8MGT-85
560-8MGT-85
600-8MGT-85
640-8MGT-85
720-8MGT-85
800-8MGT-85
840-8MGT-85
880-8MGT-85
920-8MGT-85
960-8MGT-85
1040-8MGT-85
1064-8MGT-85
1104-8MGT-85
1120-8MGT-85
1160-8MGT-85
1200-8MGT-85
9207-1024
9207-0004
9207-0008
9207-0012
9207-0016
9207-0020
9207-0024
9207-1028
9207-0028
9207-1004
9207-0032
9207-0036
9207-1008
9207-1040
9207-0040
9207-1012
9207-0044
48
60
70
75
80
90
100
105
110
115
120
130
133
138
140
146
150
15.12
18.90
22.05
23.62
25.20
28.35
31.50
33.07
34.65
36.22
37.80
40.94
41.89
43.46
44.09
45.83
47.24
.40
.50
.55
.65
.70
.75
.85
.90
.95
1.00
.95
1.10
1.05
1.30
1.20
1.20
1.25
1224-8MGT-85
1280-8MGT-85
1440-8MGT-85
1512-8MGT-85
1584-8MGT-85
1600-8MGT-85
1760-8MGT-85
1800-8MGT-85
2000-8MGT-85
2200-8MGT-85
2400-8MGT-85
2600-8MGT-85
2800-8MGT-85
3048-8MGT-85
3280-8MGT-85
3600-8MGT-85
4400-8MGT-85
9207-1032
9207-0048
9207-0052
9207-1016
9207-1020
9207-0056
9207-0060
9207-0064
9207-0068
9207-1036
9207-0072
9207-0080
9207-0076
9207-0084
9207-0088
9207-0092
9207-0096
153
160
180
189
198
200
220
225
250
275
300
325
350
381
410
450
550
48.19
50.39
56.69
59.53
62.36
62.99
69.29
70.87
78.74
86.61
94.49
102.36
110.24
120.00
129.13
141.73
173.23
1.30
1.31
1.55
1.60
1.65
1.75
1.90
1.95
2.10
2.30
2.50
2.80
3.00
3.35
3.65
3.90
4.80
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
966-14MGT-40
1190-14MGT-40
1400-14MGT-40
1610-14MGT-40
1778-14MGT-40
1890-14MGT-40
2100-14MGT-40
2310-14MGT-40
2450-14MGT-40
2590-14MGT-40
2800-14MGT-40
9207-0100
9207-0105
9207-0110
9207-0115
9207-0120
9207-0125
9207-0130
9207-0135
9207-0140
9207-0145
9207-0150
69
85
100
115
127
135
150
165
175
185
200
38.03
46.85
55.12
63.39
70.00
74.41
82.68
90.94
96.46
101.97
110.24
1.30
1.50
1.65
1.85
1.95
2.05
2.35
2.45
2.55
2.65
2.80
3150-14MGT-40
3360-14MGT-40
3500-14MGT-40
3850-14MGT-40
4326-14MGT-40
4578-14MGT-40
4956-14MGT-40
5320-14MGT-40
5740-14MGT-40
6160-14MGT-40
6860-14MGT-40
9207-0155
9207-0180
9207-0160
9207-0165
9207-0170
9207-0175
9207-0185
9207-0190
9207-0195
9207-0200
9207-0205
225
240
250
275
309
327
354
380
410
440
490
124.02
132.28
137.80
151.57
170.31
180.24
195.12
209.45
225.98
242.52
270.08
3.10
3.40
3.50
3.80
4.20
4.40
4.80
5.10
5.40
5.70
6.40
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
966-14MGT-55
1190-14MGT-55
1400-14MGT-55
1610-14MGT-55
1778-14MGT-55
1890-14MGT-55
2100-14MGT-55
2310-14MGT-55
2450-14MGT-55
2590-14MGT-55
2800-14MGT-55
9207-0101
9207-0106
9207-0111
9207-0116
9207-0121
9207-0126
9207-0131
9207-0136
9207-0141
9207-0146
9207-0151
69
85
100
115
127
135
150
165
175
185
200
38.03
46.85
55.12
63.39
70.00
74.41
82.68
90.94
96.46
101.97
110.24
1.65
1.90
2.10
2.35
2.55
2.70
2.95
3.15
3.35
3.50
3.70
3150-14MGT-55
3360-14MGT-55
3500-14MGT-55
3850-14MGT-55
4326-14MGT-55
4578-14MGT-55
4956-14MGT-55
5320-14MGT-55
5740-14MGT-55
6160-14MGT-55
6860-14MGT-55
9207-0156
9207-0181
9207-0161
9207-0166
9207-0171
9207-0176
9207-0186
9207-0191
9207-0196
9207-0201
9207-0206
225
240
250
275
309
327
354
380
410
440
490
124.02
132.28
137.80
151.57
170.31
180.24
195.12
209.45
225.98
242.52
270.08
4.10
4.40
4.60
5.00
5.60
5.90
6.50
6.95
7.50
8.00
8.75
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
966-14MGT-85
1190-14MGT-85
1400-14MGT-85
1610-14MGT-85
1778-14MGT-85
1890-14MGT-85
9207-0102
9207-0107
9207-0112
9207-0117
9207-0122
9207-0127
69
85
100
115
127
135
38.03
46.85
55.12
63.39
70.00
74.41
3.10
3.35
3.75
4.25
4.50
4.65
2100-14MGT-85
2310-14MGT-85
2450-14MGT-85
2590-14MGT-85
2800-14MGT-85
3150-14MGT-85
9207-0132
9207-0137
9207-0142
9207-0147
9207-0152
9207-0157
150
165
175
185
200
225
82.68
90.94
96.46
101.97
110.24
124.02
5.00
5.40
5.70
5.85
6.20
6.90
®
Powering Progress.
gates.com/pt
POWERGRIP GT2 BELTS
Part
No.
25
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
3360-14MGT-85
3500-14MGT-85
3850-14MGT-85
4326-14MGT-85
4578-14MGT-85
9207-0182
9207-0162
9207-0167
9207-0172
9207-0177
240
250
275
309
327
132.28
137.80
151.57
170.31
180.24
7.20
7.40
8.00
8.80
9.35
4956-14MGT-85
5320-14MGT-85
5740-14MGT-85
6160-14MGT-85
6860-14MGT-85
9207-0187
9207-0192
9207-0197
9207-0202
9207-0207
354
380
410
440
490
195.12
209.45
225.98
242.52
270.08
9.85
10.45
11.35
12.10
14.30
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
966-14MGT-115
1190-14MGT-115
1400-14MGT-115
1610-14MGT-115
1778-14MGT-115
1890-14MGT-115
2100-14MGT-115
2310-14MGT-115
2450-14MGT-115
2590-14MGT-115
2800-14MGT-115
9207-0103
9207-0108
9207-0113
9207-0118
9207-0123
9207-0128
9207-0133
9207-0138
9207-0143
9207-0148
9207-0153
69
85
100
115
127
135
150
165
175
185
200
38.03
46.85
55.12
63.39
70.00
74.41
82.68
90.94
96.46
101.97
110.24
3.50
4.00
4.65
5.15
5.55
5.90
6.25
6.50
7.25
7.45
8.10
3150-14MGT-115
3360-14MGT-115
3500-14MGT-115
3850-14MGT-115
4326-14MGT-115
4578-14MGT-115
4956-14MGT-115
5320-14MGT-115
5740-14MGT-115
6160-14MGT-115
6860-14MGT-115
9207-0158
9207-0183
9207-0163
9207-0168
9207-0173
9207-0178
9207-0188
9207-0193
9207-0198
9207-0203
9207-0208
225
240
250
275
309
327
354
380
410
440
490
124.02
132.28
137.80
151.57
170.31
180.24
195.12
209.45
225.98
242.52
270.08
8.75
9.10
10.00
10.75
11.55
12.10
13.00
14.55
15.50
16.84
18.40
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
966-14MGT-170
1190-14MGT-170
1400-14MGT-170
1610-14MGT-170
1778-14MGT-170
1890-14MGT-170
2100-14MGT-170
2310-14MGT-170
2450-14MGT-170
2590-14MGT-170
2800-14MGT-170
9207-0104
9207-0109
9207-0114
9207-0119
9207-0124
9207-0129
9207-0134
9207-0139
9207-0144
9207-0149
9207-0154
69
85
100
115
127
135
150
165
175
185
200
38.03
46.85
55.12
63.39
70.00
74.41
82.68
90.94
96.46
101.97
110.24
3.30
4.08
5.10
5.55
6.50
7.00
7.35
8.05
8.43
9.00
9.50
3150-14MGT-170
3360-14MGT-170
3500-14MGT-170
3850-14MGT-170
4326-14MGT-170
4578-14MGT-170
4956-14MGT-170
5320-14MGT-170
5740-14MGT-170
6160-14MGT-170
6860-14MGT-170
9207-0159
9207-0184
9207-0164
9207-0169
9207-0174
9207-0179
9207-0189
9207-0194
9207-0199
9207-0204
9207-0209
225
240
250
275
309
327
354
380
410
440
490
124.02
132.28
137.80
151.57
170.31
180.24
195.12
209.45
225.98
242.52
270.08
11.00
11.75
12.50
14.00
15.15
16.20
17.08
18.50
20.50
21.75
24.00
14mm Pitch PowerGrip® GT®2 ACHE Belts — 40, 55 and 85mm Wide
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
3150-14MGT-40F
3150-14MGT-55F
3150-14MGT-85F
3360-14MGT-40F
3360-14MGT-55F
3360-14MGT-85F
9207-0589
9207-0593
9207-0597
9207-0590
9207-0594
9207-0598
225
225
225
240
240
240
124.01
124.01
124.01
132.28
132.28
132.28
3.65
3.80
6.00
3.90
4.20
6.40
3500-14MGT-40F
3500-14MGT-55F
3500-14MGT-85F
3850-14MGT-40F
3850-14MGT-55F
3850-14MGT-85F
9207-0591
9207-0595
9207-0599
9207-0592
9207-0596
9207-0600
250
250
250
275
275
275
137.79
137.79
137.79
151.57
151.57
151.57
4.00
4.50
6.50
4.30
5.20
7.00
POWERGRIP GT2 BELTS
Part
No.
26
gates.com/pt
Gates Corporation
®
June 2012
PowerGrip® HTD® Belts
POWERGRIP HTD BELTS
PowerGrip HTD belts have a larger, more robust tooth profile for
increased capacity, as compared to timing belts.
PowerGrip HTD belts are suitable for many applications
including data storage, hand power tools, postage handling,
food processors, office machines, centrifuges, money handling,
medical diagnostic, sewing machines, ticket dispensers,
robotics, vending machines and vacuum cleaners.
Features/Advantages
n Fiberglass tensile cord provides high strength, excellent flex
life, and high resistance to elongation.
n Neoprene body provides protection against grime, grease, oil,
and moisture.
n Nylon tooth facing provides a durable wear surface for long
service life.
n Thirty percent increase in horsepower ratings, as compared to traditional timing belts.
n Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives.
PowerGrip HTD Sprockets
Notes
PowerGrip HTD part numbers are comprised of pitch, pitch length and width. For example; part number 900-3M-15 denotes a 900mm pitch
length, 3mm pitch and 15mm width.
total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a PowerGrip HTD belt lies within the
tensile member.
Part
No.
Product
No.
87-3M-06
102-3M-06
105-3M-06
111-3M-06
123-3M-06
144-3M-06
147-3M-06
150-3M-06
156-3M-06
159-3M-06
165-3M-06
168-3M-06
174-3M-06
177-3M-06
180-3M-06
183-3M-06
189-3M-06
195-3M-06
201-3M-06
204-3M-06
207-3M-06
213-3M-06
216-3M-06
222-3M-06
225-3M-06
228-3M-06
234-3M-06
237-3M-06
240-3M-06
246-3M-06
9293-2000
9293-2001
9293-2002
9293-2003
9293-2004
9293-2005
9293-2006
9293-0300
9293-2007
9293-0301
9293-2008
9293-0302
9293-2009
9293-0303
9293-2010
9293-2011
9293-0304
9293-2012
9293-0305
9293-2013
9293-2014
9293-0306
9293-2015
9293-2016
9293-0307
9293-2017
9293-2018
9293-2019
9293-0308
9293-2020
®
Powering Progress.
No. of
Teeth
29
34
35
37
41
48
49
50
52
53
55
56
58
59
60
61
63
65
67
68
69
71
72
74
75
76
78
79
80
82
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
3.43
4.02
4.13
4.37
4.84
5.67
5.79
5.91
6.14
6.26
6.50
6.61
6.85
6.97
7.09
7.20
7.44
7.68
7.91
8.03
8.15
8.39
8.50
8.74
8.86
8.98
9.21
9.33
9.45
9.69
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
252-3M-06
255-3M-06
258-3M-06
261-3M-06
264-3M-06
267-3M-06
276-3M-06
282-3M-06
285-3M-06
288-3M-06
291-3M-06
297-3M-06
300-3M-06
312-3M-06
315-3M-06
318-3M-06
324-3M-06
330-3M-06
333-3M-06
336-3M-06
339-3M-06
345-3M-06
357-3M-06
360-3M-06
363-3M-06
366-3M-06
369-3M-06
381-3M-06
384-3M-06
387-3M-06
9293-0309
9293-0310
9293-2021
9293-2022
9293-2023
9293-0311
9293-2024
9293-2025
9293-0312
9293-2026
9293-2027
9293-2028
9293-0313
9293-0314
9293-2029
9293-0315
9293-2030
9293-2031
9293-2032
9293-2033
9293-0316
9293-2034
9293-0317
9293-2035
9293-0318
9293-2036
9293-2037
9293-2038
9293-0319
9293-2039
84
85
86
87
88
89
92
94
95
96
97
99
100
104
105
106
108
110
111
112
113
115
119
120
121
122
123
127
128
129
9.92
10.04
10.16
10.28
10.39
10.51
10.87
11.10
11.22
11.34
11.46
11.69
11.81
12.28
12.40
12.52
12.76
12.99
13.11
13.23
13.35
13.58
14.06
14.17
14.29
14.41
14.53
15.00
15.12
15.24
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.02
.02
gates.com/pt
27
June 2012
POWERGRIP HTD BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
390-3M-06
396-3M-06
399-3M-06
405-3M-06
411-3M-06
417-3M-06
420-3M-06
426-3M-06
432-3M-06
435-3M-06
438-3M-06
444-3M-06
447-3M-06
459-3M-06
468-3M-06
471-3M-06
474-3M-06
480-3M-06
486-3M-06
489-3M-06
492-3M-06
501-3M-06
510-3M-06
513-3M-06
519-3M-06
525-3M-06
528-3M-06
531-3M-06
537-3M-06
558-3M-06
564-3M-06
570-3M-06
576-3M-06
585-3M-06
591-3M-06
597-3M-06
600-3M-06
606-3M-06
609-3M-06
612-3M-06
627-3M-06
9293-0320
9293-2040
9293-0321
9293-2041
9293-2042
9293-2043
9293-0322
9293-2044
9293-2045
9293-2046
9293-2047
9293-2048
9293-0323
9293-2049
9293-2050
9293-2051
9293-0324
9293-2052
9293-0325
9293-2053
9293-2054
9293-0326
9293-2055
9293-0327
9293-2056
9293-2057
9293-2058
9293-0328
9293-2059
9293-2060
9293-0329
9293-2061
9293-2062
9293-2063
9293-2064
9293-0330
9293-2065
9293-2066
9293-2067
9293-2068
9293-2069
130
132
133
135
137
139
140
142
144
145
146
148
149
153
156
157
158
160
162
163
164
167
170
171
173
175
176
177
179
186
188
190
192
195
197
199
200
202
203
204
209
15.35
15.59
15.71
15.94
16.18
16.42
16.54
16.77
17.01
17.13
17.24
17.48
17.60
18.07
18.43
18.54
18.66
18.90
19.13
19.25
19.37
19.72
20.08
20.20
20.43
20.67
20.79
20.91
21.14
21.97
22.20
22.44
22.68
23.03
23.27
23.50
23.62
23.86
23.98
24.09
24.69
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
633-3M-06
639-3M-06
645-3M-06
648-3M-06
654-3M-06
657-3M-06
663-3M-06
669-3M-06
684-3M-06
687-3M-06
696-3M-06
711-3M-06
735-3M-06
738-3M-06
753-3M-06
795-3M-06
822-3M-06
837-3M-06
843-3M-06
873-3M-06
882-3M-06
891-3M-06
900-3M-06
915-3M-06
945-3M-06
951-3M-06
981-3M-06
1002-3M-06
1026-3M-06
1035-3M-06
1062-3M-06
1125-3M-06
1155-3M-06
1191-3M-06
1263-3M-06
1500-3M-06
1512-3M-06
1587-3M-06
1956-3M-06
2004-3M-06
9293-0331
9293-2070
9293-2071
9293-2072
9293-2073
9293-2074
9293-2075
9293-0332
9293-2076
9293-2077
9293-2078
9293-0333
9293-2079
9293-2080
9293-0334
9293-0335
9293-2081
9293-2082
9293-0336
9293-2083
9293-0337
9293-2084
9293-2085
9293-2086
9293-0338
9293-2087
9293-2088
9293-0339
9293-2089
9293-2090
9293-0340
9293-0341
9293-2091
9293-0342
9293-0343
9293-2092
9293-2093
9293-2094
9293-2095
9293-2096
211
213
215
216
218
219
221
223
228
229
232
237
245
246
251
265
274
279
281
291
294
297
300
305
315
317
327
334
342
345
354
375
385
397
421
500
504
529
652
668
24.92
25.16
25.39
25.51
25.75
25.87
26.10
26.34
26.93
27.05
27.40
27.99
28.94
29.06
29.65
31.30
32.36
32.95
33.19
34.37
34.72
35.08
35.43
36.02
37.20
37.44
38.62
39.45
40.39
40.75
41.81
44.29
45.47
46.89
49.72
59.06
59.53
62.48
77.01
78.90
.02
.02
.02
.02
.02
.02
.02
.02
.03
.02
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.06
.07
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
3.43
4.02
4.13
4.37
4.84
5.67
5.79
5.91
6.14
6.26
6.50
6.61
6.85
6.97
7.09
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
183-3M-09
189-3M-09
195-3M-09
201-3M-09
204-3M-09
207-3M-09
213-3M-09
216-3M-09
222-3M-09
225-3M-09
228-3M-09
234-3M-09
237-3M-09
240-3M-09
246-3M-09
9293-2211
9293-0348
9293-2212
9293-0349
9293-2213
9293-2214
9293-0350
9293-2215
9293-2216
9293-0351
9293-2217
9293-2218
9293-2219
9293-0352
9293-2220
7.20
7.44
7.68
7.91
8.03
8.15
8.39
8.50
8.74
8.86
8.98
9.21
9.33
9.45
9.69
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
28
Part
No.
Product
No.
87-3M-09
102-3M-09
105-3M-09
111-3M-09
123-3M-09
144-3M-09
147-3M-09
150-3M-09
156-3M-09
159-3M-09
165-3M-09
168-3M-09
174-3M-09
177-3M-09
180-3M-09
9293-2200
9293-2201
9293-2202
9293-2203
9293-2204
9293-2205
9293-2206
9293-0344
9293-2207
9293-0345
9293-2208
9293-0346
9293-2209
9293-0347
9293-2210
gates.com/pt
29
34
35
37
41
48
49
50
52
53
55
56
58
59
60
61
63
65
67
68
69
71
72
74
75
76
78
79
80
82
Gates Corporation
®
June 2012
POWERGRIP HTD BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
252-3M-09
255-3M-09
258-3M-09
261-3M-09
264-3M-09
267-3M-09
276-3M-09
282-3M-09
285-3M-09
288-3M-09
291-3M-09
297-3M-09
300-3M-09
312-3M-09
315-3M-09
318-3M-09
324-3M-09
330-3M-09
333-3M-09
336-3M-09
339-3M-09
345-3M-09
357-3M-09
360-3M-09
363-3M-09
366-3M-09
369-3M-09
381-3M-09
384-3M-09
387-3M-09
390-3M-09
396-3M-09
399-3M-09
405-3M-09
411-3M-09
417-3M-09
420-3M-09
426-3M-09
432-3M-09
435-3M-09
438-3M-09
444-3M-09
447-3M-09
459-3M-09
468-3M-09
471-3M-09
474-3M-09
480-3M-09
486-3M-09
489-3M-09
492-3M-09
501-3M-09
510-3M-09
513-3M-09
519-3M-09
525-3M-09
9293-0353
9293-0354
9293-2221
9293-2222
9293-2223
9293-0355
9293-2224
9293-2225
9293-0356
9293-2226
9293-2227
9293-2228
9293-0357
9293-0358
9293-2229
9293-0359
9293-2230
9293-2231
9293-2232
9293-2233
9293-0360
9293-2234
9293-0361
9293-2235
9293-0362
9293-2236
9293-2237
9293-2238
9293-0363
9293-2239
9293-0364
9293-2240
9293-0365
9293-2241
9293-2242
9293-2243
9293-0366
9293-2244
9293-2245
9293-2246
9293-2247
9293-2248
9293-0367
9293-2249
9293-2250
9293-2251
9293-0368
9293-2252
9293-0369
9293-2253
9293-2254
9293-0370
9293-2255
9293-0371
9293-2256
9293-2257
84
85
86
87
88
89
92
94
95
96
97
99
100
104
105
106
108
110
111
112
113
115
119
120
121
122
123
127
128
129
130
132
133
135
137
139
140
142
144
145
146
148
149
153
156
157
158
160
162
163
164
167
170
171
173
175
9.92
10.04
10.16
10.28
10.39
10.51
10.87
11.10
11.22
11.34
11.46
11.69
11.81
12.28
12.40
12.52
12.76
12.99
13.11
13.23
13.35
13.58
14.06
14.17
14.29
14.41
14.53
15.00
15.12
15.24
15.35
15.59
15.71
15.94
16.18
16.42
16.54
16.77
17.01
17.13
17.24
17.48
17.60
18.07
18.43
18.54
18.66
18.90
19.13
19.25
19.37
19.72
20.08
20.20
20.43
20.67
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
®
Powering Progress.
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
528-3M-09
531-3M-09
537-3M-09
558-3M-09
564-3M-09
570-3M-09
576-3M-09
585-3M-09
591-3M-09
597-3M-09
600-3M-09
606-3M-09
609-3M-09
612-3M-09
627-3M-09
633-3M-09
639-3M-09
645-3M-09
648-3M-09
654-3M-09
657-3M-09
663-3M-09
669-3M-09
684-3M-09
687-3M-09
696-3M-09
711-3M-09
735-3M-09
738-3M-09
753-3M-09
795-3M-09
822-3M-09
837-3M-09
843-3M-09
873-3M-09
882-3M-09
891-3M-09
900-3M-09
915-3M-09
945-3M-09
951-3M-09
981-3M-09
1002-3M-09
1026-3M-09
1035-3M-09
1062-3M-09
1125-3M-09
1155-3M-09
1191-3M-09
1263-3M-09
1500-3M-09
1512-3M-09
1587-3M-09
1956-3M-09
2004-3M-09
9293-2258
9293-0372
9293-2259
9293-2260
9293-0373
9293-2261
9293-2262
9293-2263
9293-2264
9293-0374
9293-2265
9293-2266
9293-2267
9293-2268
9293-2269
9293-0375
9293-2270
9293-2271
9293-2272
9293-2273
9293-2274
9293-2275
9293-0376
9293-2276
9293-2277
9293-2278
9293-0377
9293-2279
9293-2280
9293-0378
9293-0379
9293-2281
9293-2282
9293-0380
9293-2283
9293-0381
9293-2284
9293-2285
9293-2286
9293-0382
9293-2287
9293-2288
9293-0383
9293-2289
9293-2290
9293-0384
9293-0385
9293-2291
9293-0386
9293-0387
9293-2292
9293-2293
9293-2294
9293-2295
9293-2296
176
177
179
186
188
190
192
195
197
199
200
202
203
204
209
211
213
215
216
218
219
221
223
228
229
232
237
245
246
251
265
274
279
281
291
294
297
300
305
315
317
327
334
342
345
354
375
385
397
421
500
504
529
652
668
20.79
20.91
21.14
21.97
22.20
22.44
22.68
23.03
23.27
23.50
23.62
23.86
23.98
24.09
24.69
24.92
25.16
25.39
25.51
25.75
25.87
26.10
26.34
26.93
27.05
27.40
27.99
28.94
29.06
29.65
31.30
32.36
32.95
33.19
34.37
34.72
35.08
35.43
36.02
37.20
37.44
38.62
39.45
40.39
40.75
41.81
44.29
45.47
46.89
49.72
59.06
59.53
62.48
77.01
78.90
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.03
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.06
.06
.06
.07
.08
.08
.08
.11
.11
gates.com/pt
29
June 2012
POWERGRIP HTD BELTS
30
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
87-3M-15
102-3M-15
105-3M-15
111-3M-15
123-3M-15
144-3M-15
147-3M-15
150-3M-15
156-3M-15
159-3M-15
165-3M-15
168-3M-15
174-3M-15
177-3M-15
180-3M-15
183-3M-15
189-3M-15
195-3M-15
201-3M-15
204-3M-15
207-3M-15
213-3M-15
216-3M-15
222-3M-15
225-3M-15
228-3M-15
234-3M-15
237-3M-15
240-3M-15
246-3M-15
252-3M-15
255-3M-15
258-3M-15
261-3M-15
264-3M-15
267-3M-15
276-3M-15
282-3M-15
285-3M-15
288-3M-15
291-3M-15
297-3M-15
300-3M-15
312-3M-15
315-3M-15
318-3M-15
324-3M-15
330-3M-15
333-3M-15
336-3M-15
339-3M-15
345-3M-15
357-3M-15
360-3M-15
363-3M-15
366-3M-15
369-3M-15
381-3M-15
384-3M-15
387-3M-15
390-3M-15
396-3M-15
9293-2400
9293-2401
9293-2402
9293-2403
9293-2404
9293-2405
9293-2406
9293-0388
9293-2407
9293-0389
9293-2408
9293-0390
9293-2409
9293-0391
9293-2410
9293-2411
9293-0392
9293-2412
9293-0393
9293-2413
9293-2414
9293-0394
9293-2415
9293-2416
9293-0395
9293-2417
9293-2418
9293-2419
9293-0396
9293-2420
9293-0397
9293-0398
9293-2421
9293-2422
9293-2423
9293-0399
9293-2424
9293-2425
9293-0400
9293-2426
9293-2427
9293-2428
9293-0401
9293-0402
9293-2429
9293-0403
9293-2430
9293-2431
9293-2432
9293-2433
9293-0404
9293-2434
9293-0405
9293-2435
9293-0406
9293-2436
9293-2437
9293-2438
9293-0407
9293-2439
9293-0408
9293-2440
29
34
35
37
41
48
49
50
52
53
55
56
58
59
60
61
63
65
67
68
69
71
72
74
75
76
78
79
80
82
84
85
86
87
88
89
92
94
95
96
97
99
100
104
105
106
108
110
111
112
113
115
119
120
121
122
123
127
128
129
130
132
3.43
4.02
4.13
4.37
4.84
5.67
5.79
5.91
6.14
6.26
6.50
6.61
6.85
6.97
7.09
7.20
7.44
7.68
7.91
8.03
8.15
8.39
8.50
8.74
8.86
8.98
9.21
9.33
9.45
9.69
9.92
10.04
10.16
10.28
10.39
10.51
10.87
11.10
11.22
11.34
11.46
11.69
11.81
12.28
12.40
12.52
12.76
12.99
13.11
13.23
13.35
13.58
14.06
14.17
14.29
14.41
14.53
15.00
15.12
15.24
15.35
15.59
.01
.01
.01
.01
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.04
.04
.04
.04
.04
.04
.04
399-3M-15
405-3M-15
411-3M-15
417-3M-15
420-3M-15
426-3M-15
432-3M-15
435-3M-15
438-3M-15
444-3M-15
447-3M-15
459-3M-15
468-3M-15
471-3M-15
474-3M-15
480-3M-15
486-3M-15
489-3M-15
492-3M-15
501-3M-15
510-3M-15
513-3M-15
519-3M-15
525-3M-15
528-3M-15
531-3M-15
537-3M-15
558-3M-15
564-3M-15
570-3M-15
576-3M-15
585-3M-15
591-3M-15
597-3M-15
600-3M-15
606-3M-15
609-3M-15
612-3M-15
627-3M-15
633-3M-15
639-3M-15
645-3M-15
648-3M-15
654-3M-15
657-3M-15
663-3M-15
669-3M-15
684-3M-15
687-3M-15
696-3M-15
711-3M-15
735-3M-15
738-3M-15
753-3M-15
795-3M-15
822-3M-15
837-3M-15
843-3M-15
873-3M-15
882-3M-15
891-3M-15
900-3M-15
9293-0409
9293-2441
9293-2442
9293-2443
9293-0410
9293-2444
9293-2445
9293-2446
9293-2447
9293-2448
9293-0411
9293-2449
9293-2450
9293-2451
9293-0412
9293-2452
9293-0413
9293-2453
9293-2454
9293-0414
9293-2455
9293-0415
9293-2456
9293-2457
9293-2458
9293-0416
9293-2459
9293-2460
9293-0417
9293-2461
9293-2462
9293-2463
9293-2464
9293-0418
9293-2465
9293-2466
9293-2467
9293-2468
9293-2469
9293-0419
9293-2470
9293-2471
9293-2472
9293-2473
9293-2474
9293-2475
9293-0420
9293-2476
9293-2477
9293-2478
9293-0421
9293-2479
9293-2480
9293-0422
9293-0423
9293-2481
9293-2482
9293-0424
9293-2483
9293-0425
9293-2484
9293-2485
133
135
137
139
140
142
144
145
146
148
149
153
156
157
158
160
162
164
164
167
170
171
173
175
176
177
179
186
188
190
192
195
197
199
200
202
203
204
209
211
213
215
216
218
219
221
223
228
229
232
237
245
246
251
265
274
279
281
291
294
297
300
15.71
15.94
16.18
16.42
16.54
16.77
17.01
17.13
17.24
17.48
17.60
18.07
18.43
18.54
18.66
18.90
19.13
19.25
19.37
19.72
20.08
20.20
20.43
20.67
20.79
20.91
21.14
21.97
22.20
22.44
22.68
23.03
23.27
23.50
23.62
23.86
23.98
24.09
24.69
24.92
25.16
25.39
25.51
25.75
25.87
26.10
26.34
26.93
27.05
27.40
27.99
28.94
29.06
29.65
31.30
32.36
32.95
33.19
34.37
34.72
35.08
35.43
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.07
.07
.07
.07
.07
.07
.07
.07
.08
.08
.08
.08
.08
.09
.09
gates.com/pt
Gates Corporation
®
June 2012
POWERGRIP HTD BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
915-3M-15
945-3M-15
951-3M-15
981-3M-15
1002-3M-15
1026-3M-15
1035-3M-15
1062-3M-15
1125-3M-15
9293-2486
9293-0426
9293-2487
9293-2488
9293-0427
9293-2489
9293-2490
9293-0428
9293-0429
305
315
317
327
334
342
345
354
375
36.02
37.20
37.44
38.62
39.45
40.39
40.75
41.81
44.29
.09
.09
.09
.09
.10
.10
.10
.10
.11
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
1155-3M-15
1191-3M-15
1263-3M-15
1500-3M-15
1512-3M-15
1587-3M-15
1956-3M-15
2004-3M-15
9293-2491
9293-0430
9293-0431
9293-2492
9293-2493
9293-2494
9293-2495
9293-2496
385
397
421
500
504
529
652
668
40.47
46.89
49.72
59.06
59.53
62.48
77.01
78.90
.11
.11
.12
.15
.15
.15
.19
.20
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
200-5M-09
240-5M-09
260-5M-09
270-5M-09
285-5M-09
300-5M-09
310-5M-09
320-5M-09
350-5M-09
375-5M-09
400-5M-09
415-5M-09
425-5M-09
450-5M-09
460-5M-09
475-5M-09
480-5M-09
495-5M-09
500-5M-09
520-5M-09
535-5M-09
555-5M-09
565-5M-09
580-5M-09
585-5M-09
600-5M-09
615-5M-09
635-5M-09
655-5M-09
665-5M-09
670-5M-09
680-5M-09
685-5M-09
695-5M-09
710-5M-09
740-5M-09
745-5M-09
765-5M-09
790-5M-09
9293-2600
9293-2601
9293-2602
9293-2603
9293-2604
9293-2605
9293-2606
9293-2607
9293-0500
9293-0501
9293-0502
9293-2608
9293-0503
9293-0504
9293-2609
9293-0505
9293-2610
9293-2611
9293-0506
9293-2612
9293-0507
9293-2613
9293-0508
9293-2614
9293-2615
9293-0509
9293-2616
9293-0510
9293-2617
9293-2618
9293-0511
9293-2619
9293-2620
9293-2621
9293-0512
9293-0513
9293-2622
9293-2623
9293-2624
40
48
52
54
57
60
62
64
70
75
80
83
85
90
92
95
96
99
100
104
107
111
113
116
117
120
123
127
131
133
134
136
137
139
142
148
149
153
158
7.87
9.45
10.24
10.63
11.22
11.81
12.20
12.60
13.78
14.76
15.75
16.34
16.73
17.72
18.11
18.70
18.90
19.49
19.69
20.47
21.06
21.85
22.24
22.83
23.03
23.62
24.21
25.00
25.79
26.18
26.38
26.77
26.97
27.36
27.95
29.13
29.33
30.12
31.10
.01
.01
.01
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.03
.03
.03
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.06
.06
.06
800-5M-09
830-5M-09
835-5M-09
850-5M-09
870-5M-09
890-5M-09
925-5M-09
950-5M-09
975-5M-09
985-5M-09
1000-5M-09
1050-5M-09
1115-5M-09
1125-5M-09
1195-5M-09
1250-5M-09
1270-5M-09
1295-5M-09
1375-5M-09
1420-5M-09
1575-5M-09
1595-5M-09
1635-5M-09
1690-5M-09
1720-5M-09
1790-5M-09
1800-5M-09
1895-5M-09
1945-5M-09
1980-5M-09
2000-5M-09
2110-5M-09
2250-5M-09
2525-5M-09
2760-5M-09
3120-5M-09
3170-5M-09
3430-5M-09
3800-5M-09
9293-0514
9293-2625
9293-2626
9293-0515
9293-2627
9293-0516
9293-2628
9293-0517
9293-2629
9293-2630
9293-0518
9293-0519
9293-2631
9293-0520
9293-0521
9293-2632
9293-0522
9293-2633
9293-2634
9293-0523
9293-2635
9293-0524
9293-2636
9293-0525
9293-2637
9293-0526
9293-2638
9293-0527
9293-2639
9293-2640
9293-0528
9293-2641
9293-0529
9293-0530
9293-2642
9293-2643
9293-2644
9293-2645
9293-2646
160
166
167
170
174
178
185
190
195
197
200
210
223
225
239
250
254
259
275
284
315
319
327
338
344
358
360
379
389
396
400
422
450
505
552
624
634
686
760
31.50
32.68
32.87
33.46
34.25
35.04
36.42
37.40
38.39
38.78
39.37
41.34
43.90
44.29
47.05
49.21
50.00
50.98
54.13
55.91
62.01
62.80
64.37
66.54
67.72
70.47
70.87
74.61
76.57
77.95
78.74
83.07
88.58
99.40
108.66
122.83
124.80
135.04
149.61
.06
.06
.07
.07
.07
.07
.07
.07
.07
.07
.08
.08
.08
.09
.09
.09
.10
.10
.11
.11
.13
.13
.13
.13
.14
.15
.15
.15
.16
.17
.17
.17
.19
.21
.23
.26
.27
.29
.33
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
40
48
52
7.87
9.45
10.24
.02
.03
.03
270-5M-15
285-5M-15
300-5M-15
9293-2703
9293-2704
9293-2705
54
57
60
10.63
11.22
11.81
.03
.03
.03
Part
No.
Product
No.
200-5M-15
240-5M-15
260-5M-15
9293-2700
9293-2701
9293-2702
®
Powering Progress.
gates.com/pt
31
June 2012
POWERGRIP HTD BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
310-5M-15
320-5M-15
350-5M-15
375-5M-15
400-5M-15
415-5M-15
425-5M-15
450-5M-15
460-5M-15
475-5M-15
480-5M-15
495-5M-15
500-5M-15
520-5M-15
535-5M-15
555-5M-15
565-5M-15
580-5M-15
585-5M-15
600-5M-15
615-5M-15
635-5M-15
655-5M-15
665-5M-15
670-5M-15
680-5M-15
685-5M-15
695-5M-15
710-5M-15
740-5M-15
745-5M-15
765-5M-15
790-5M-15
800-5M-15
830-5M-15
835-5M-15
9293-2706
9293-2707
9293-0531
9293-0532
9293-0533
9293-2708
9293-0534
9293-0535
9293-2709
9293-0536
9293-2710
9293-2711
9293-0537
9293-2712
9293-0538
9293-2713
9293-0539
9293-2714
9293-2715
9293-0540
9293-2716
9293-0541
9293-2717
9293-2718
9293-0542
9293-2719
9293-2720
9293-2721
9293-0543
9293-0544
9293-2722
9293-2723
9293-2724
9293-0545
9293-2725
9293-2726
62
64
70
75
80
83
85
90
92
95
96
99
100
104
107
111
113
116
117
120
123
127
131
133
134
136
137
139
142
148
149
153
158
160
166
167
12.20
12.60
13.78
14.76
15.75
16.34
16.73
17.72
18.11
18.70
18.90
19.49
19.69
20.47
21.06
21.85
22.24
22.83
23.03
23.62
24.21
25.00
25.79
26.18
26.38
26.77
26.97
27.36
27.95
29.13
29.33
30.12
31.10
31.50
32.68
32.87
.04
.04
.04
.05
.05
.05
.05
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.07
.08
.07
.07
.07
.08
.08
.08
.09
.09
.09
.09
.09
.09
.10
.10
.10
.10
.10
850-5M-15
870-5M-15
890-5M-15
925-5M-15
950-5M-15
975-5M-15
985-5M-15
1000-5M-15
1050-5M-15
1115-5M-15
1125-5M-15
1195-5M-15
1250-5M-15
1270-5M-15
1295-5M-15
1375-5M-15
1420-5M-15
1575-5M-15
1595-5M-15
1635-5M-15
1690-5M-15
1720-5M-15
1790-5M-15
1800-5M-15
1895-5M-15
1945-5M-15
1980-5M-15
2000-5M-15
2110-5M-15
2250-5M-15
2525-5M-15
2760-5M-15
3120-5M-15
3170-5M-15
3430-5M-15
3800-5M-15
9293-0546
9293-2727
9293-0547
9293-2728
9293-0548
9293-2729
9293-2730
9293-0549
9293-0550
9293-2731
9293-0551
9293-0552
9293-2732
9293-0553
9293-2733
9293-2734
9293-0554
9293-2735
9293-0555
9293-2736
9293-0556
9293-2737
9293-0557
9293-2738
9293-0558
9293-2739
9293-2740
9293-0559
9293-2741
9293-0560
9293-0561
9293-2742
9293-2743
9293-2744
9293-2745
9293-2746
170
174
178
185
190
195
197
200
210
223
225
239
250
254
259
275
284
315
319
327
338
344
358
360
379
389
396
400
422
450
505
552
624
634
686
760
33.46
34.25
35.04
36.42
37.40
38.39
38.78
39.37
41.34
43.90
44.29
47.05
49.21
50.00
50.98
54.13
55.91
62.01
62.80
64.37
66.54
67.72
70.47
70.87
74.61
76.57
77.95
78.74
83.07
88.58
99.40
108.66
122.83
124.80
135.04
149.61
.10
.11
.11
.12
.12
.12
.12
.12
.12
.14
.14
.15
.16
.16
.16
.17
.18
.20
.20
.21
.21
.21
.22
.22
.24
.25
.25
.25
.26
.29
.33
.35
.40
.40
.45
.50
32
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
200-5M-25
240-5M-25
260-5M-25
270-5M-25
285-5M-25
300-5M-25
310-5M-25
320-5M-25
350-5M-25
375-5M-25
400-5M-25
415-5M-25
425-5M-25
450-5M-25
460-5M-25
475-5M-25
480-5M-25
495-5M-25
500-5M-25
520-5M-25
9293-2800
9293-2801
9293-2802
9293-2803
9293-2804
9293-2805
9293-2806
9293-2807
9293-0562
9293-0563
9293-0564
9293-2808
9293-0565
9293-0566
9293-2809
9293-0567
9293-2810
9293-2811
9293-0568
9293-2812
40
48
52
54
57
60
62
64
70
75
80
83
85
90
92
95
96
99
100
104
7.87
9.45
10.24
10.63
11.22
11.81
12.20
12.60
13.78
14.76
15.75
16.34
16.73
17.72
18.11
18.70
18.90
19.49
19.69
20.47
.04
.05
.05
.06
.06
.06
.06
.07
.07
.07
.08
.08
.09
.09
.09
.09
.10
.10
.11
.11
535-5M-25
555-5M-25
565-5M-25
580-5M-25
585-5M-25
600-5M-25
615-5M-25
635-5M-25
655-5M-25
665-5M-25
670-5M-25
680-5M-25
685-5M-25
695-5M-25
710-5M-25
740-5M-25
745-5M-25
765-5M-25
790-5M-25
800-5M-25
9293-0569
9293-2813
9293-0570
9293-2814
9293-2815
9293-0571
9293-2816
9293-0572
9293-2817
9293-2818
9293-0573
9293-2819
9293-2820
9293-2821
9293-0574
9293-0575
9293-2822
9293-2823
9293-2824
9293-0576
107
111
113
116
117
120
123
127
131
133
134
136
137
139
142
148
149
153
158
160
21.06
21.85
22.24
22.83
23.03
23.62
24.21
25.00
25.79
26.18
26.38
26.77
26.97
27.36
27.95
29.13
29.33
30.12
31.10
31.50
.12
.12
.13
.13
.14
.14
.14
.15
.15
.15
.15
.15
.16
.16
.17
.17
.18
.18
.19
.19
gates.com/pt
Gates Corporation
®
June 2012
POWERGRIP HTD BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
830-5M-25
835-5M-25
850-5M-25
870-5M-25
890-5M-25
925-5M-25
950-5M-25
975-5M-25
985-5M-25
1000-5M-25
1050-5M-25
1115-5M-25
1125-5M-25
1195-5M-25
1250-5M-25
1270-5M-25
1295-5M-25
1375-5M-25
1420-5M-25
9293-2825
9293-2826
9293-0577
9293-2827
9293-0578
9293-2828
9293-0579
9293-2829
9293-2830
9293-0580
9293-0581
9293-2831
9293-0582
9293-0583
9293-2832
9293-0584
9293-2833
9293-2834
9293-0585
166
167
170
174
178
185
190
195
197
200
210
223
225
239
250
254
259
275
284
32.68
32.87
33.46
34.25
35.04
36.42
37.40
38.39
38.78
39.37
41.34
43.90
44.29
47.05
49.21
50.00
50.98
54.13
55.91
.20
.20
.20
.20
.20
.21
.21
.22
.22
.23
.24
.24
.25
.26
.27
.28
.29
.30
.30
1575-5M-25
1595-5M-25
1635-5M-25
1690-5M-25
1720-5M-25
1790-5M-25
1800-5M-25
1895-5M-25
1945-5M-25
1980-5M-25
2000-5M-25
2110-5M-25
2250-5M-25
2525-5M-25
2760-5M-25
3120-5M-25
3170-5M-25
3430-5M-25
3800-5M-25
9293-2835
9293-0586
9293-2836
9293-0587
9293-2837
9293-0588
9293-2838
9293-0589
9293-2839
9293-2840
9293-0590
9293-2841
9293-0591
9293-0592
9293-2842
9293-2843
9293-2844
9293-2845
9293-2846
315
319
327
338
344
358
360
379
389
396
400
422
450
505
552
624
634
686
760
62.01
62.84
64.37
66.54
67.72
70.47
70.87
74.61
76.57
77.95
78.74
83.07
88.58
99.40
108.66
122.83
124.80
135.04
149.61
.35
.35
.37
.38
.38
.40
.40
.43
.44
.45
.45
.48
.52
.58
.64
.72
.73
.80
.88
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5400-20M-115
5600-20M-115
5800-20M-115
6000-20M-115
6200-20M-115
6400-20M-115
6600-20M-115
9293-0709
9293-0710
9293-0711
9293-0775
9293-0712
9293-0713
9293-0714
270
280
290
300
310
320
330
212.60
220.47
228.35
236.22
244.09
251.97
259.84
19.50
20.00
21.00
22.50
23.50
24.00
25.00
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5400-20M-170
5600-20M-170
5800-20M-170
6000-20M-170
6200-20M-170
6400-20M-170
6600-20M-170
9293-0724
9293-0725
9293-0726
9293-0776
9293-0727
9293-0728
9293-0729
270
280
290
300
310
320
330
212.60
220.47
228.35
236.22
244.09
251.97
259.84
28.50
30.00
31.00
31.95
33.00
34.00
35.00
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5400-20M-230
5600-20M-230
5800-20M-230
6000-20M-230
6200-20M-230
6400-20M-230
6600-20M-230
9293-0739
9293-0740
9293-0741
9293-0777
9293-0742
9293-0743
9293-0744
270
280
290
300
310
320
330
212.60
220.47
228.35
236.22
244.09
251.97
259.84
38.00
40.00
42.00
43.00
44.00
46.00
47.00
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2000-20M-115
2500-20M-115
3400-20M-115
3800-20M-115
4200-20M-115
4600-20M-115
5000-20M-115
5200-20M-115
9293-0700
9293-0702
9293-0703
9293-0704
9293-0705
9293-0706
9293-0707
9293-0708
100
125
170
190
210
230
250
260
78.74
98.43
133.86
149.61
165.35
181.10
196.85
204.72
7.00
9.40
12.30
13.70
15.00
16.30
18.50
19.00
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2000-20M-170
2500-20M-170
3400-20M-170
3800-20M-170
4200-20M-170
4600-20M-170
5000-20M-170
5200-20M-170
9293-0715
9293-0717
9293-0718
9293-0719
9293-0720
9293-0721
9293-0722
9293-0723
100
125
170
190
210
230
250
260
78.74
98.43
133.86
149.61
165.35
181.10
196.85
204.72
12.50
14.65
19.00
21.00
23.00
24.55
26.50
27.50
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2000-20M-230
2500-20M-230
3400-20M-230
3800-20M-230
4200-20M-230
4600-20M-230
5000-20M-230
5200-20M-230
9293-0730
9293-0732
9293-0733
9293-0734
9293-0735
9293-0736
9293-0737
9293-0738
100
125
170
190
210
230
250
260
78.74
98.43
133.86
149.61
165.35
181.10
196.85
204.72
17.44
21.83
25.50
29.00
30.25
34.00
35.00
36.40
®
Powering Progress.
gates.com/pt
33
June 2012
POWERGRIP HTD BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2000-20M-290
2500-20M-290
3400-20M-290
3800-20M-290
4200-20M-290
4600-20M-290
5000-20M-290
5200-20M-290
9293-0745
9293-0747
9293-0748
9293-0749
9293-0750
9293-0751
9293-0752
9293-0753
100
125
170
190
210
230
250
260
78.74
98.43
133.86
149.61
165.35
181.10
196.85
204.72
21.99
27.52
37.48
41.91
46.34
50.76
55.19
57.40
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5400-20M-290
5600-20M-290
5800-20M-290
6000-20M-290
6200-20M-290
6400-20M-290
6600-20M-290
9293-0754
9293-0755
9293-0756
9293-0778
9293-0757
9293-0758
9293-0759
270
280
290
300
310
320
330
212.60
220.47
228.35
236.22
244.09
251.97
259.84
43.45
61.83
64.05
66.26
68.47
70.69
72.90
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
5400-20M-340
5600-20M-340
5800-20M-340
6000-20M-340
6200-20M-340
6400-20M-340
6600-20M-340
9293-0769
9293-0770
9293-0771
9293-0779
9293-0772
9293-0773
9293-0774
270
280
290
300
310
320
330
212.60
220.47
228.35
236.22
244.09
251.97
259.84
69.90
72.49
75.09
77.68
80.28
82.87
85.47
34
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
2000-20M-340
2500-20M-340
3400-20M-340
3800-20M-340
4200-20M-340
4600-20M-340
5000-20M-340
5200-20M-340
9293-0760
9293-0762
9293-0763
9293-0764
9293-0765
9293-0766
9293-0767
9293-0768
100
125
170
190
210
230
250
260
78.74
98.43
133.86
149.61
165.35
181.10
196.85
204.72
25.78
32.27
43.94
36.60
54.33
59.52
64.71
67.30
gates.com/pt
Gates Corporation
®
June 2012
PowerGrip® Timing Belts
The trapezoidal tooth profile makes this belt well suited for use in
positioning applications.
PowerGrip Timing belts are suitable for office machines, machine
tools, postage equipment, sewing machines, vending machines,
agriculture, outdoor power equipment, food processing, HVAC, oil
fields, wood, paper, sand and gravel applications.
Features/Advantages
Recommended Pulleys
PowerGrip Timing Pulleys
Notes
Gates PowerGrip Timing belts are measured by:
Length — The length of a PowerGrip Timing Belts is shown in the first part of the belt designation. The first number is the pitch length in tenths
of an inch. A 300L075 has a 30.0” pitch length.
Pitch — The pitch is the distance from center to center of the teeth (in inches). It is shown in the second part of the belt designation by a letter
or letters. Part number 300L075 has a .375” pitch. The letters correspond to pitches as follows:
MXL = Mini Extra Light = 0.080” pitch;
XL = Extra Light = 0.200” pitch;
L = Light = 0.375” pitch;
H = Heavy = 0.500” pitch;
XH = Extra Heavy = 0.875” pitch;
XXH = Double Extra Heavy = 1.250” pitch.
Width — The width is shown in the last part of the belt designation. Part number 300L075 is .75” wide.
2/25" Pitch (.080"/MXL) — 1/8" Wide
Part
No.
Product
No.
32MXL012
34MXL012
36MXL012
38MXL012
40MXL012
43MXL012
44MXL012
45MXL012
47MXL012
48MXL012
51MXL012
52MXL012
53MXL012
54MXL012
56MXL012
57MXL012
58MXL012
59MXL012
61MXL012
62MXL012
63MXL012
64MXL012
66MXL012
9257-0129
9257-0130
9257-0119
9257-0131
9257-0120
9257-0132
9257-0121
9257-0133
9257-0134
9257-0122
9257-0135
9257-0136
9257-0137
9257-0138
9257-0104
9257-0139
9257-0140
9257-0141
9257-0142
9257-0143
9257-0144
9257-0105
9257-0145
®
Powering Progress.
No. of
Teeth
40
42
45
47
50
54
55
56
59
60
64
65
67
68
70
71
72
74
76
77
79
80
83
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
3.20
3.36
3.60
3.76
4.00
4.32
4.40
4.48
4.72
4.80
5.12
5.20
5.36
5.44
5.60
5.68
5.76
5.92
6.08
6.16
6.32
6.40
6.64
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
68MXL012
69MXL012
70MXL012
72MXL012
74MXL012
75MXL012
76MXL012
80MXL012
81MXL012
82MXL012
84MXL012
85MXL012
86MXL012
87MXL012
88MXL012
90MXL012
91MXL012
96MXL012
98MXL012
100MXL012
101MXL012
104MXL012
106MXL012
9257-0123
9257-0146
9257-0147
9257-0106
9257-0148
9257-0149
9257-0124
9257-0107
9257-0150
9257-0151
9257-0152
9257-0153
9257-0154
9257-0155
9257-0108
9257-0156
9257-0157
9257-0100
9257-0158
9257-0159
9257-0160
9257-0109
9257-0161
85
87
88
90
92
94
95
100
102
103
105
107
108
109
110
112
114
120
123
125
126
130
132
6.80
6.96
7.04
7.20
7.36
7.52
7.60
8.00
8.16
8.24
8.40
8.56
8.64
8.72
8.80
8.96
9.12
9.60
9.84
10.00
10.08
10.40
10.56
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
gates.com/pt
35
POWERGRIP TIMING BELTS
and moisture.
service life.
n Eliminates lubrication and re-tensioning to reduce maintenance
and labor required on drives.
June 2012
2/25" Pitch (.080"/MXL) — 1/8" Wide (continued)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
112MXL012
115MXL012
120MXL012
122MXL012
124MXL012
132MXL012
133MXL012
136MXL012
140MXL012
147MXL012
152MXL012
156MXL012
160MXL012
166MXL012
168MXL012
170MXL012
177MXL012
178MXL012
180MXL012
184MXL012
196MXL012
9257-0110
9257-0162
9257-0111
9257-0163
9257-0164
9257-0125
9257-0165
9257-0166
9257-0112
9257-0167
9257-0126
9257-0168
9257-0113
9257-0169
9257-0127
9257-0170
9257-0171
9257-0172
9257-0114
9257-0173
9257-0174
140
144
150
153
155
165
166
170
175
184
190
195
200
208
210
212
221
222
225
230
245
11.20
11.52
12.00
12.24
12.40
13.20
13.28
13.60
14.00
14.72
15.20
15.60
16.00
16.64
16.80
16.96
17.68
17.76
18.00
18.40
19.60
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
198MXL012
200MXL012
208MXL012
212MXL012
224MXL012
236MXL012
240MXL012
252MXL012
278MXL012
297MXL012
298MXL012
320MXL012
330MXL012
339MXL012
347MXL012
348MXL012
390MXL012
398MXL012
480MXL012
490MXL012
518MXL012
9257-0175
9257-0115
9257-0116
9257-0176
9257-0177
9257-0128
9257-0117
9257-0178
9257-0179
9257-0180
9257-0181
9257-0118
9257-0182
9257-0183
9257-0184
9257-0185
9257-0186
9257-0187
9257-0188
9257-0189
9257-0190
248
250
260
265
280
295
300
315
347
371
372
400
412
424
434
435
487
498
600
612
648
19.84
20.00
20.80
21.20
22.40
23.60
24.00
25.20
27.76
29.68
29.76
32.00
32.96
33.92
34.72
34.80
38.96
39.84
48.00
48.96
51.84
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
2/25" Pitch (.080"/MXL) — 3/16" Wide
36
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
32MXL019
34MXL019
36MXL019
38MXL019
40MXL019
43MXL019
44MXL019
45MXL019
47MXL019
48MXL019
51MXL019
52MXL019
53MXL019
54MXL019
56MXL019
57MXL019
58MXL019
59MXL019
61MXL019
62MXL019
63MXL019
64MXL019
66MXL019
68MXL019
69MXL019
70MXL019
72MXL019
74MXL019
75MXL019
76MXL019
80MXL019
81MXL019
82MXL019
84MXL019
85MXL019
9257-0229
9257-0230
9257-0219
9257-0231
9257-0220
9257-0232
9257-0221
9257-0233
9257-0234
9257-0222
9257-0235
9257-0236
9257-0237
9257-0238
9257-0204
9257-0239
9257-0240
9257-0241
9257-0242
9257-0243
9257-0244
9257-0205
9257-0245
9257-0223
9257-0246
9257-0247
9257-0206
9257-0248
9257-0249
9257-0224
9257-0207
9257-0250
9257-0251
9257-0252
9257-0253
40
42
45
47
50
54
55
56
59
60
64
65
67
68
70
71
72
74
76
77
79
80
83
85
87
88
90
92
94
95
100
102
103
105
107
3.20
3.36
3.60
3.76
4.00
4.32
4.40
4.48
4.72
4.80
5.12
5.20
5.36
5.44
5.60
5.68
5.76
5.92
6.08
6.16
6.32
6.40
6.64
6.80
6.96
7.04
7.20
7.36
7.52
7.60
8.00
8.16
8.24
8.40
8.56
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
86MXL019
87MXL019
88MXL019
90MXL019
91MXL019
96MXL019
98MXL019
100MXL019
101MXL019
104MXL019
106MXL019
112MXL019
115MXL019
120MXL019
122MXL019
124MXL019
132MXL019
133MXL019
136MXL019
140MXL019
147MXL019
152MXL019
156MXL019
160MXL019
166MXL019
168MXL019
170MXL019
177MXL019
178MXL019
180MXL019
184MXL019
196MXL019
198MXL019
200MXL019
208MXL019
9257-0254
9257-0255
9257-0208
9257-0256
9257-0257
9257-0200
9257-0258
9257-0259
9257-0260
9257-0209
9257-0261
9257-0210
9257-0262
9257-0211
9257-0263
9257-0264
9257-0225
9257-0265
9257-0266
9257-0212
9257-0267
9257-0226
9257-0268
9257-0213
9257-0269
9257-0227
9257-0270
9257-0271
9257-0272
9257-0214
9257-0273
9257-0274
9257-0275
9257-0215
9257-0216
108
109
110
112
114
120
123
125
126
130
132
140
144
150
153
155
165
166
170
175
184
190
195
200
208
210
212
221
222
225
230
245
248
250
260
8.64
8.72
8.80
8.96
9.12
9.60
9.84
10.00
10.08
10.40
10.56
11.20
11.52
12.00
12.24
12.40
13.20
13.28
13.60
14.00
14.72
15.20
15.60
16.00
16.64
16.80
16.96
17.68
17.76
18.00
18.40
19.60
19.84
20.00
20.80
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
gates.com/pt
Gates Corporation
®
June 2012
2/25" Pitch (.080"/MXL) — 3/16" Wide (continued)
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
212MXL019
224MXL019
236MXL019
240MXL019
252MXL019
278MXL019
297MXL019
298MXL019
320MXL019
9257-0276
9257-0277
9257-0228
9257-0217
9257-0278
9257-0279
9257-0280
9257-0281
9257-0218
265
280
295
300
315
347
371
372
400
21.20
22.40
23.60
24.00
25.20
27.76
29.68
29.76
32.00
.01
.01
.01
.01
.01
.01
.02
.02
.02
330MXL019
339MXL019
347MXL019
348MXL019
390MXL019
398MXL019
480MXL019
490MXL019
518MXL019
9257-0282
9257-0283
9257-0284
9257-0285
9257-0286
9257-0287
9257-0288
9257-0289
9257-0290
412
424
434
435
487
498
600
612
648
32.96
33.92
34.72
34.80
38.96
39.84
48.00
48.96
51.84
.02
.02
.02
.02
.02
.02
.02
.02
.02
Part
No.
2/25" Pitch (.080"/MXL) — 1/4" Wide
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
32MXL025
34MXL025
36MXL025
38MXL025
40MXL025
43MXL025
44MXL025
45MXL025
47MXL025
48MXL025
51MXL025
52MXL025
53MXL025
54MXL025
56MXL025
57MXL025
58MXL025
59MXL025
61MXL025
62MXL025
63MXL025
64MXL025
66MXL025
68MXL025
69MXL025
70MXL025
72MXL025
74MXL025
75MXL025
76MXL025
80MXL025
81MXL025
82MXL025
84MXL025
85MXL025
86MXL025
87MXL025
88MXL025
90MXL025
91MXL025
96MXL025
98MXL025
100MXL025
101MXL025
9257-0329
9257-0330
9257-0319
9257-0331
9257-0320
9257-0332
9257-0321
9257-0333
9257-0334
9257-0322
9257-0335
9257-0336
9257-0337
9257-0338
9257-0304
9257-0339
9257-0340
9257-0341
9257-0342
9257-0343
9257-0344
9257-0305
9257-0345
9257-0323
9257-0346
9257-0347
9257-0306
9257-0348
9257-0349
9257-0324
9257-0307
9257-0350
9257-0351
9257-0352
9257-0353
9257-0354
9257-0355
9257-0308
9257-0356
9257-0357
9257-0300
9257-0358
9257-0359
9257-0360
40
42
45
47
50
54
55
56
59
60
64
65
67
68
70
71
72
74
76
77
79
80
83
85
87
88
90
92
94
95
100
102
103
105
107
108
109
110
112
114
120
123
125
126
3.20
3.36
3.60
3.76
4.00
4.32
4.40
4.48
4.72
4.80
5.12
5.20
5.36
5.44
5.60
5.68
5.76
5.92
6.08
6.16
6.32
6.40
6.64
6.80
6.96
7.04
7.20
7.36
7.52
7.60
8.00
8.16
8.24
8.40
8.56
8.64
8.72
8.80
8.96
9.12
9.60
9.84
10.00
10.08
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
104MXL025
106MXL025
112MXL025
115MXL025
120MXL025
122MXL025
124MXL025
132MXL025
133MXL025
136MXL025
140MXL025
147MXL025
152MXL025
156MXL025
160MXL025
166MXL025
168MXL025
170MXL025
177MXL025
178MXL025
180MXL025
184MXL025
196MXL025
198MXL025
200MXL025
208MXL025
212MXL025
224MXL025
236MXL025
240MXL025
252MXL025
278MXL025
297MXL025
298MXL025
320MXL025
330MXL025
339MXL025
347MXL025
348MXL025
390MXL025
398MXL025
480MXL025
490MXL025
518MXL025
9257-0309
9257-0361
9257-0310
9257-0362
9257-0311
9257-0363
9257-0364
9257-0325
9257-0365
9257-0366
9257-0312
9257-0367
9257-0326
9257-0368
9257-0313
9257-0369
9257-0327
9257-0370
9257-0371
9257-0372
9257-0314
9257-0373
9257-0374
9257-0375
9257-0315
9257-0316
9257-0376
9257-0377
9257-0328
9257-0317
9257-0378
9257-0379
9257-0380
9257-0381
9257-0318
9257-0382
9257-0383
9257-0384
9257-0385
9257-0386
9257-0387
9257-0388
9257-0389
9257-0390
130
132
140
144
150
153
155
165
166
170
175
184
190
195
200
208
210
212
221
222
225
230
245
248
250
260
265
280
295
300
315
347
371
372
400
412
424
434
435
487
498
600
612
648
10.40
10.56
11.20
11.52
12.00
12.24
12.40
13.20
13.28
13.60
14.00
14.72
15.20
15.60
16.00
16.64
16.80
16.96
17.68
17.76
18.00
18.40
19.60
19.84
20.00
20.80
21.20
22.40
23.60
24.00
25.20
27.76
29.68
29.76
32.00
32.96
33.92
34.72
34.80
38.96
39.84
48.00
48.96
51.84
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.01
.01
.01
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
®
Powering Progress.
gates.com/pt
37
June 2012
1/5" Pitch (.200"/XL) — 1/4" Wide
38
Part
No.
Product
No.
42XL025
50XL025
54XL025
56XL025
58XL025
60XL025
62XL025
64XL025
66XL025
68XL025
70XL025
72XL025
74XL025
76XL025
78XL025
80XL025
82XL025
84XL025
86XL025
88XL025
90XL025
92XL025
94XL025
96XL025
98XL025
100XL025
102XL025
106XL025
108XL025
110XL025
112XL025
114XL025
116XL025
120XL025
122XL025
124XL025
126XL025
128XL025
130XL025
132XL025
134XL025
136XL025
138XL025
140XL025
142XL025
144XL025
146XL025
148XL025
150XL025
152XL025
154XL025
156XL025
158XL025
160XL025
162XL025
164XL025
166XL025
168XL025
170XL025
172XL025
174XL025
176XL025
9257-1141
9257-1121
9257-1142
9257-1143
9257-1144
9257-1100
9257-1145
9257-1146
9257-1147
9257-1148
9257-1101
9257-1149
9257-1150
9257-1151
9257-1152
9257-1102
9257-1153
9257-1154
9257-1155
9257-1156
9257-1103
9257-1157
9257-1158
9257-1159
9257-1160
9257-1104
9257-1161
9257-1162
9257-1163
9257-1105
9257-1164
9257-1165
9257-1166
9257-1106
9257-1167
9257-1168
9257-1169
9257-1170
9257-1107
9257-1171
9257-1172
9257-1173
9257-1174
9257-1108
9257-1175
9257-1176
9257-1177
9257-1178
9257-1109
9257-1179
9257-1180
9257-1181
9257-1182
9257-1110
9257-1183
9257-1184
9257-1185
9257-1186
9257-1111
9257-1187
9257-1188
9257-1189
gates.com/pt
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
21
25
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
53
54
55
56
57
58
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
4.20
5.00
5.40
5.60
5.80
6.00
6.20
6.40
6.60
6.80
7.00
7.20
7.40
7.60
7.80
8.00
8.20
8.40
8.60
8.80
9.00
9.20
9.40
9.60
9.80
10.00
10.20
10.60
10.80
11.00
11.20
11.40
11.60
12.00
12.20
12.40
12.60
12.80
13.00
13.20
13.40
13.60
13.80
14.00
14.20
14.40
14.60
14.80
15.00
15.20
15.40
15.60
15.80
16.00
16.20
16.40
16.60
16.80
17.00
17.20
17.40
17.60
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.01
.01
.01
.01
.02
.02
.02
.02
178XL025
180XL025
182XL025
184XL025
186XL025
188XL025
190XL025
192XL025
194XL025
200XL025
202XL025
204XL025
206XL025
210XL025
212XL025
214XL025
218XL025
220XL025
222XL025
226XL025
228XL025
230XL025
232XL025
234XL025
236XL025
240XL025
244XL025
246XL025
250XL025
254XL025
258XL025
260XL025
262XL025
264XL025
266XL025
268XL025
274XL025
280XL025
286XL025
290XL025
296XL025
300XL025
306XL025
310XL025
316XL025
320XL025
322XL025
330XL025
338XL025
340XL025
344XL025
348XL025
350XL025
362XL025
370XL025
380XL025
384XL025
390XL025
400XL025
412XL025
420XL025
424XL025
9257-1190
9257-1112
9257-1191
9257-1192
9257-1193
9257-1194
9257-1113
9257-1195
9257-1196
9257-1114
9257-1197
9257-1198
9257-1199
9257-1115
9257-8100
9257-8101
9257-8102
9257-1116
9257-8103
9257-8104
9257-8105
9257-1117
9257-8106
9257-8107
9257-8108
9257-1118
9257-8109
9257-8110
9257-1119
9257-8111
9257-8112
9257-1120
9257-8113
9257-8114
9257-8115
9257-8116
9257-8117
9257-1122
9257-8118
9257-1123
9257-8119
9257-1124
9257-8120
9257-1125
9257-8121
9257-8122
9257-8123
9257-1126
9257-8124
9257-1127
9257-8125
9257-8126
9257-1128
9257-8127
9257-1129
9257-1130
9257-8128
9257-1131
9257-1132
9257-8129
9257-1133
9257-8130
89
90
91
92
93
94
95
96
97
100
101
102
103
105
106
107
109
110
111
113
114
115
116
117
118
120
122
123
125
127
129
130
131
132
133
134
137
140
143
145
148
150
153
155
158
160
161
165
169
170
172
174
175
181
185
190
192
195
200
206
210
212
17.80
18.00
18.20
18.40
18.60
18.80
19.00
19.20
19.40
20.00
20.20
20.40
20.60
21.00
21.20
21.40
21.80
22.00
22.20
22.60
22.80
23.00
23.20
23.40
23.60
24.00
24.40
24.60
25.00
25.40
25.80
26.00
26.20
26.40
26.60
26.80
27.40
28.00
28.60
29.00
29.60
30.00
30.60
31.00
31.60
32.00
32.20
33.00
33.80
34.00
34.40
34.80
35.00
36.20
37.00
38.00
38.40
39.00
40.00
41.20
42.00
42.40
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.01
.01
.02
.01
.02
.02
.02
.01
.02
.02
.01
.02
.02
.02
.01
.02
.02
.02
.02
.03
.02
.01
.02
.03
.02
.03
.02
.03
.02
.03
.02
.03
.04
.02
.01
.03
.03
.04
.03
.03
.01
.03
.05
Gates Corporation
®
June 2012
1/5" Pitch (.200"/XL) — 1/4" Wide (continued)
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
432XL025
438XL025
444XL025
450XL025
454XL025
460XL025
468XL025
480XL025
492XL025
498XL025
500XL025
9257-8131
9257-8132
9257-8133
9257-1134
9257-8134
9257-1135
9257-8135
9257-1136
9257-8136
9257-8137
9257-1137
216
219
222
225
227
230
234
240
246
249
250
43.20
43.80
44.40
45.00
45.40
46.00
46.80
48.00
49.20
49.80
50.00
.05
.04
.05
.03
.05
.03
.05
.03
.04
.05
.03
506XL025
524XL025
570XL025
580XL025
592XL025
612XL025
630XL025
672XL025
690XL025
770XL025
850XL025
9257-8138
9257-8139
9257-1138
9257-8140
9257-8141
9257-8142
9257-1139
9257-8143
9257-8144
9257-1140
9257-8145
253
262
285
290
296
306
315
336
345
385
425
50.60
52.40
57.00
58.00
59.20
61.20
63.00
67.20
69.00
77.00
85.00
.04
.04
.04
.05
.05
.05
.05
.04
.04
.06
.06
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
21
25
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
53
54
55
56
57
58
60
61
62
63
64
65
66
67
68
69
70
71
4.20
5.00
5.40
5.60
5.80
6.00
6.20
6.40
6.60
6.80
7.00
7.20
7.40
7.60
7.80
8.00
8.20
8.40
8.60
8.80
9.00
9.20
9.40
9.60
9.80
10.00
10.20
10.60
10.80
11.00
11.20
11.40
11.60
12.00
12.20
12.40
12.60
12.80
13.00
13.20
13.40
13.60
13.80
14.00
14.20
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.02
.01
.02
.02
.01
.02
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
144XL037
146XL037
148XL037
150XL037
152XL037
154XL037
156XL037
158XL037
160XL037
162XL037
164XL037
166XL037
168XL037
170XL037
172XL037
174XL037
176XL037
178XL037
180XL037
182XL037
184XL037
186XL037
188XL037
190XL037
192XL037
194XL037
200XL037
202XL037
204XL037
206XL037
210XL037
212XL037
214XL037
218XL037
220XL037
222XL037
226XL037
228XL037
230XL037
232XL037
234XL037
236XL037
240XL037
244XL037
246XL037
9257-1376
9257-1377
9257-1378
9257-1309
9257-1379
9257-1380
9257-1381
9257-1382
9257-1310
9257-1383
9257-1384
9257-1385
9257-1386
9257-1311
9257-1387
9257-1388
9257-1389
9257-1390
9257-1312
9257-1391
9257-1392
9257-1393
9257-1394
9257-1313
9257-1395
9257-1396
9257-1314
9257-1397
9257-1398
9257-1399
9257-1315
9257-8300
9257-8301
9257-8302
9257-1316
9257-8303
9257-8304
9257-8305
9257-1317
9257-8306
9257-8307
9257-8308
9257-1318
9257-8309
9257-8310
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
100
101
102
103
105
106
107
109
110
111
113
114
115
116
117
118
120
122
123
14.40
14.60
14.80
15.00
15.20
15.40
15.60
15.80
16.00
16.20
16.40
16.60
16.80
17.00
17.20
17.40
17.60
17.80
18.00
18.20
18.40
18.60
18.80
19.00
19.20
19.40
20.00
20.20
20.40
20.60
21.00
21.20
21.40
21.80
22.00
22.20
22.60
22.80
23.00
23.20
23.40
23.60
24.00
24.40
24.60
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.02
.02
.03
.02
.02
.03
.03
.03
.02
.03
.03
Part
No.
1/5" Pitch (.200"/XL) — 3/8" Wide
Part
No.
Product
No.
42XL037
50XL037
54XL037
56XL037
58XL037
60XL037
62XL037
64XL037
66XL037
68XL037
70XL037
72XL037
74XL037
76XL037
78XL037
80XL037
82XL037
84XL037
86XL037
88XL037
90XL037
92XL037
94XL037
96XL037
98XL037
100XL037
102XL037
106XL037
108XL037
110XL037
112XL037
114XL037
116XL037
120XL037
122XL037
124XL037
126XL037
128XL037
130XL037
132XL037
134XL037
136XL037
138XL037
140XL037
142XL037
9257-1341
9257-1321
9257-1342
9257-1343
9257-1344
9257-1300
9257-1345
9257-1346
9257-1347
9257-1348
9257-1301
9257-1349
9257-1350
9257-1351
9257-1352
9257-1302
9257-1353
9257-1354
9257-1355
9257-1356
9257-1303
9257-1357
9257-1358
9257-1359
9257-1360
9257-1304
9257-1361
9257-1362
9257-1363
9257-1305
9257-1364
9257-1365
9257-1366
9257-1306
9257-1367
9257-1368
9257-1369
9257-1370
9257-1307
9257-1371
9257-1372
9257-1373
9257-1374
9257-1308
9257-1375
®
Powering Progress.
gates.com/pt
39
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
250XL037
254XL037
258XL037
260XL037
262XL037
264XL037
266XL037
268XL037
274XL037
280XL037
286XL037
290XL037
296XL037
300XL037
306XL037
310XL037
316XL037
320XL037
322XL037
330XL037
338XL037
340XL037
344XL037
348XL037
350XL037
362XL037
370XL037
380XL037
9257-1319
9257-8311
9257-8312
9257-1320
9257-8313
9257-8314
9257-8315
9257-8316
9257-8317
9257-1322
9257-8318
9257-1323
9257-8319
9257-1324
9257-8320
9257-1325
9257-8321
9257-8322
9257-8323
9257-1326
9257-8324
9257-1327
9257-8325
9257-8326
9257-1328
9257-8327
9257-1329
9257-1330
125
127
129
130
131
132
133
134
137
140
143
145
148
150
153
155
158
160
161
165
169
170
172
174
175
181
185
190
25.00
25.40
25.80
26.00
26.20
26.40
26.60
26.80
27.40
28.00
28.60
29.00
29.60
30.00
30.60
31.00
31.60
32.00
32.20
33.00
33.80
34.00
34.40
34.80
35.00
36.20
37.00
38.00
.03
.03
.03
.03
.20
.20
.20
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.04
.04
.03
.04
.03
.05
.04
.03
.04
.04
.04
384XL037
390XL037
400XL037
412XL037
420XL037
424XL037
432XL037
438XL037
444XL037
450XL037
454XL037
460XL037
468XL037
480XL037
492XL037
498XL037
500XL037
506XL037
524XL037
570XL037
580XL037
592XL037
612XL037
630XL037
672XL037
690XL037
770XL037
850XL037
9257-8328
9257-1331
9257-1332
9257-8329
9257-1333
9257-8330
9257-8331
9257-8332
9257-8333
9257-1334
9257-8334
9257-1335
9257-8335
9257-1336
9257-8336
9257-8337
9257-1337
9257-8338
9257-8339
9257-1338
9257-8340
9257-8341
9257-8342
9257-1339
9257-8343
9257-8344
9257-1340
9257-8345
192
195
200
206
210
212
216
219
222
225
227
230
234
240
246
249
250
253
262
285
290
296
306
315
336
345
385
425
38.40
39.00
40.00
41.20
42.00
42.40
43.20
43.80
44.40
45.00
45.40
46.00
46.80
48.00
49.20
49.80
50.00
50.60
52.40
57.00
58.00
59.20
61.20
63.00
67.20
69.00
77.00
85.00
.05
.04
.04
.05
.04
.05
.05
.05
.05
.04
.06
.05
.06
.05
.06
.06
.05
.08
.06
.06
.07
.06
.08
.07
.10
.10
.08
.09
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
33
36
40
41
42
44
46
47
50
52
53
54
56
58
60
64
66
68
70
72
76
80
84
12.38
13.50
15.00
15.38
15.75
16.50
17.25
17.63
18.75
19.50
19.88
20.25
21.00
21.75
22.50
24.00
24.75
25.50
26.25
27.00
28.50
30.00
31.50
.02
.03
.03
.03
.04
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
.06
.06
.06
.06
.07
.07
322L050
345L050
367L050
375L050
390L050
420L050
446L050
450L050
480L050
510L050
540L050
566L050
570L050
581L050
600L050
630L050
660L050
720L050
731L050
817L050
900L050
915L050
945L050
9257-2110
9257-2111
9257-2112
9257-7139
9257-2113
9257-2114
9257-7140
9257-2115
9257-2116
9257-2117
9257-2118
9257-7141
9257-7142
9257-7143
9257-2119
9257-7144
9257-2124
9257-7145
9257-7146
9257-2125
9257-2126
9257-7147
9257-7148
86
92
98
100
104
112
119
120
128
136
144
151
152
155
160
168
176
192
195
218
240
244
252
32.25
34.50
36.75
37.50
39.00
42.00
44.63
45.00
48.00
51.00
54.00
56.63
57.00
58.13
60.00
63.00
66.00
72.00
73.13
81.75
90.00
91.50
94.50
.07
.07
.08
.08
.09
.10
.10
.11
.11
.12
.12
.14
.14
.14
.14
.15
.15
.17
.18
.20
.22
.22
.23
3/8" Pitch (.375"/L) — 1/2" Wide
40
Part
No.
Product
No.
124L050
135L050
150L050
154L050
158L050
165L050
173L050
176L050
187L050
195L050
199L050
203L050
210L050
218L050
225L050
240L050
248L050
255L050
263L050
270L050
285L050
300L050
315L050
9257-2100
9257-2120
9257-2101
9257-2127
9257-2128
9257-2121
9257-2129
9257-7133
9257-2102
9257-2122
9257-7134
9257-7135
9257-2103
9257-7136
9257-2104
9257-2105
9257-7137
9257-2106
9257-7138
9257-2107
9257-2108
9257-2109
9257-2123
gates.com/pt
Gates Corporation
®
June 2012
3/8" Pitch (.375"/L) — 3/4" Wide
Product
No.
124L075
135L075
150L075
154L075
158L075
165L075
173L075
176L075
187L075
195L075
199L075
203L075
210L075
218L075
225L075
240L075
248L075
255L075
263L075
270L075
285L075
300L075
315L075
9257-2200
9257-2220
9257-2201
9257-2227
9257-2228
9257-2221
9257-2229
9257-7233
9257-2202
9257-2222
9257-7234
9257-7235
9257-2203
9257-7236
9257-2204
9257-2205
9257-7237
9257-2206
9257-7238
9257-2207
9257-2208
9257-2209
9257-2223
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
33
36
40
41
42
44
46
47
50
52
53
54
56
58
60
64
66
68
70
72
76
80
84
12.38
13.50
15.00
15.38
15.75
16.50
17.25
17.63
18.75
19.50
19.88
20.25
21.00
21.75
22.50
24.00
24.75
25.50
26.25
27.00
28.50
30.00
31.50
.04
.04
.04
.04
.05
.05
.05
.06
.06
.06
.06
.06
.06
.07
.07
.08
.08
.08
.08
.09
.10
.10
.11
322L075
345L075
367L075
375L075
390L075
420L075
446L075
450L075
480L075
510L075
540L075
566L075
570L075
581L075
600L075
630L075
660L075
720L075
731L075
817L075
900L075
915L075
945L075
9257-2210
9257-2211
9257-2212
9257-7239
9257-2213
9257-2214
9257-7240
9257-2215
9257-2216
9257-2217
9257-2218
9257-7241
9257-7242
9257-7243
9257-2219
9257-7244
9257-2224
9257-7245
9257-7246
9257-2225
9257-2226
9257-7247
9257-7248
86
92
98
100
104
112
119
120
128
136
144
151
152
155
160
168
176
192
195
218
240
244
252
32.25
34.50
36.75
37.50
39.00
42.00
44.63
45.00
48.00
51.00
54.00
56.63
57.00
58.13
60.00
63.00
66.00
72.00
73.13
81.75
90.00
91.50
94.50
.11
.12
.12
.13
.14
.15
.16
.16
.18
.19
.20
.21
.21
.22
.23
.25
.26
.28
.28
.32
.36
.37
.38
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
33
36
40
41
42
44
46
47
50
52
53
54
56
58
60
64
66
68
70
72
76
80
84
12.38
13.50
15.00
15.38
15.75
16.50
17.25
17.63
18.75
19.50
19.88
20.25
21.00
21.75
22.50
24.00
24.75
25.50
26.25
27.00
28.50
30.00
31.50
.05
.05
.06
.06
.06
.06
.07
.07
.08
.08
.09
.09
.09
.09
.10
.10
.10
.11
.11
.12
.12
.13
.15
322L100
345L100
367L100
375L100
390L100
420L100
446L100
450L100
480L100
510L100
540L100
566L100
570L100
581L100
600L100
630L100
660L100
720L100
731L100
817L100
900L100
915L100
945L100
9257-2310
9257-2311
9257-2312
9257-7339
9257-2313
9257-2314
9257-7340
9257-2315
9257-2316
9257-2317
9257-2318
9257-7341
9257-7342
9257-7343
9257-2319
9257-7344
9257-2324
9257-7345
9257-7346
9257-2325
9257-2326
9257-7347
9257-7348
86
92
98
100
104
112
119
120
128
136
144
151
152
155
160
168
176
192
195
218
240
244
252
32.25
34.50
36.75
37.50
39.00
42.00
44.63
45.00
48.00
51.00
54.00
56.63
57.00
58.13
60.00
63.00
66.00
72.00
73.13
81.75
90.00
91.50
94.50
.15
.16
.17
.17
.18
.20
.22
.22
.24
.25
.27
.29
.29
.29
.30
.32
.34
.37
.38
.42
.47
.48
.50
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
42
44
45
46
48
21.00
22.00
22.50
23.00
24.00
.07
.07
.08
.09
.09
270H075
300H075
310H075
315H075
320H075
9257-3101
9257-3102
9257-3146
9257-3147
9257-3128
54
60
62
63
64
27.00
30.00
31.00
31.50
32.00
.10
.10
.12
.12
.12
Part
No.
3/8" Pitch (.375"/L) — 1" Wide
Part
No.
Product
No.
124L100
135L100
150L100
154L100
158L100
165L100
173L100
176L100
187L100
195L100
199L100
203L100
210L100
218L100
225L100
240L100
248L100
255L100
263L100
270L100
285L100
300L100
315L100
9257-2300
9257-2320
9257-2301
9257-2327
9257-2328
9257-2321
9257-2329
9257-7333
9257-2302
9257-2322
9257-7334
9257-7335
9257-2303
9257-7336
9257-2304
9257-2305
9257-7337
9257-2306
9257-7338
9257-2307
9257-2308
9257-2309
9257-2323
1/2" Pitch (.500"/H) — 3/4" Wide
Part
No.
Product
No.
210H075
220H075
225H075
230H075
240H075
9257-3125
9257-3126
9257-3145
9257-3127
9257-3100
®
Powering Progress.
gates.com/pt
41
June 2012
1/2" Pitch (.500"/H) — 3/4" Wide (continued)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
330H075
340H075
350H075
360H075
370H075
390H075
400H075
410H075
415H075
420H075
445H075
450H075
455H075
465H075
480H075
490H075
495H075
510H075
525H075
540H075
555H075
560H075
570H075
585H075
600H075
605H075
630H075
645H075
655H075
660H075
670H075
9257-3103
9257-3129
9257-3130
9257-3104
9257-3131
9257-3105
9257-3132
9257-3133
9257-3148
9257-3106
9257-3149
9257-3107
9257-8150
9257-8151
9257-3108
9257-3134
9257-8152
9257-3109
9257-8153
9257-3110
9257-8154
9257-3135
9257-3111
9257-3136
9257-3112
9257-8155
9257-3113
9257-3137
9257-8156
9257-3114
9257-8157
66
68
70
72
74
78
80
82
83
84
89
90
91
93
96
98
99
102
105
108
111
112
114
117
120
121
126
129
131
132
134
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
42.00
44.50
45.00
45.50
46.50
48.00
49.00
49.50
51.00
52.50
54.00
55.50
56.00
57.00
58.50
60.00
60.50
63.00
64.50
65.50
66.00
67.00
.12
.14
.15
.15
.15
.16
.16
.16
.16
.17
.18
.18
.19
.19
.20
.20
.21
.21
.22
.23
.23
.24
.24
.25
.26
.26
.28
.27
.28
.28
.29
700H075
730H075
750H075
775H075
780H075
800H075
810H075
820H075
840H075
850H075
900H075
950H075
960H075
1000H075
1100H075
1140H075
1180H075
1250H075
1325H075
1350H075
1365H075
1400H075
1510H075
1550H075
1645H075
1680H075
1700H075
2090H075
2100H075
2120H075
2330H075
9257-3115
9257-3138
9257-3116
9257-8158
9257-3139
9257-3117
9257-8159
9257-3140
9257-3141
9257-3118
9257-3119
9257-8160
9257-3142
9257-3120
9257-3121
9257-3143
9257-8161
9257-3122
9257-8162
9257-8163
9257-8164
9257-3123
9257-8165
9257-3144
9257-8166
9257-8167
9257-3124
9257-8168
9257-8169
9257-8170
9257-8171
140
146
150
155
156
160
162
164
168
170
180
190
192
200
220
228
236
250
265
270
273
280
302
310
329
336
340
418
420
424
466
70.00
73.00
75.00
77.50
78.00
80.00
81.00
82.00
84.00
85.00
90.00
95.00
96.00
100.00
110.00
114.00
118.00
125.00
132.50
135.00
136.50
140.00
151.00
155.00
164.50
168.00
170.00
209.00
210.00
212.00
233.00
.30
.32
.33
.34
.35
.35
.36
.36
.38
.38
.41
.44
.44
.45
.50
.52
.55
.57
.60
.62
.62
.65
.69
.70
.76
.79
.80
.98
.98
1.00
1.10
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
42
44
45
46
48
54
60
62
63
64
66
68
70
72
74
78
80
82
83
84
89
90
91
93
96
21.00
22.00
22.50
23.00
24.00
27.00
30.00
31.00
31.50
32.00
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
42.00
44.50
45.00
45.50
46.50
48.00
.08
.08
.08
.09
.10
.11
.13
.14
.14
.15
.15
.16
.16
.17
.17
.18
.19
.19
.20
.20
.23
.23
.23
.23
.23
490H100
495H100
510H100
525H100
540H100
555H100
560H100
570H100
585H100
600H100
605H100
630H100
645H100
655H100
660H100
670H100
700H100
730H100
750H100
775H100
780H100
800H100
810H100
820H100
840H100
9257-3234
9257-8252
9257-3209
9257-8253
9257-3210
9257-8254
9257-3235
9257-3211
9257-3236
9257-3212
9257-8255
9257-3213
9257-3237
9257-8256
9257-3214
9257-8257
9257-3215
9257-3238
9257-3216
9257-8258
9257-3239
9257-3217
9257-8259
9257-3240
9257-3241
98
99
102
105
108
111
112
114
117
120
121
126
129
131
132
134
140
146
150
155
156
160
162
164
168
49.00
49.50
51.00
52.50
54.00
55.50
56.00
57.00
58.50
60.00
60.50
63.00
64.50
65.50
66.00
67.00
70.00
73.00
75.00
77.50
78.00
80.00
81.00
82.00
84.00
.24
.25
.26
.27
.28
.29
.30
.32
.33
.33
.33
.34
.35
.36
.36
.37
.40
.41
.42
.43
.44
.45
.46
.46
.48
1/2" Pitch (.500"/H) — 1" Wide
42
Part
No.
Product
No.
210H100
220H100
225H100
230H100
240H100
270H100
300H100
310H100
315H100
320H100
330H100
340H100
350H100
360H100
370H100
390H100
400H100
410H100
415H100
420H100
445H100
450H100
455H100
465H100
480H100
9257-3225
9257-3226
9257-3245
9257-3227
9257-3200
9257-3201
9257-3202
9257-3246
9257-3247
9257-3228
9257-3203
9257-3229
9257-3230
9257-3204
9257-3231
9257-3205
9257-3232
9257-3233
9257-3248
9257-3206
9257-3249
9257-3207
9257-8250
9257-8251
9257-3208
gates.com/pt
Gates Corporation
®
June 2012
1/2" Pitch (.500"/H) — 1" Wide (continued)
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
850H100
900H100
950H100
960H100
1000H100
1100H100
1140H100
1180H100
1250H100
1325H100
1350H100
9257-3218
9257-3219
9257-8260
9257-3242
9257-3220
9257-3221
9257-3243
9257-8261
9257-3222
9257-8262
9257-8263
170
180
190
192
200
220
228
236
250
265
270
85.00
90.00
95.00
96.00
100.00
110.00
114.00
118.00
125.00
132.50
135.00
.48
.51
.53
.55
.58
.64
.67
.69
.75
.78
.80
1365H100
1400H100
1510H100
1550H100
1645H100
1680H100
1700H100
2090H100
2100H100
2120H100
2330H100
9257-8264
9257-3223
9257-8265
9257-3244
9257-8266
9257-8267
9257-3224
9257-8268
9257-8269
9257-8270
9257-8271
273
280
302
310
329
336
340
418
420
424
466
136.50
140.00
151.00
155.00
164.50
168.00
170.00
209.00
210.00
212.00
233.00
.80
.84
.90
.94
1.00
1.01
1.03
1.26
1.26
1.30
1.44
Part
No.
1/2" Pitch (.500"/H) — 1 1/2" Wide
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
210H150
220H150
225H150
230H150
240H150
270H150
300H150
310H150
315H150
320H150
330H150
340H150
350H150
360H150
370H150
390H150
400H150
410H150
415H150
420H150
445H150
450H150
455H150
465H150
480H150
490H150
495H150
510H150
525H150
540H150
555H150
560H150
570H150
585H150
600H150
605H150
9257-3325
9257-3326
9257-3345
9257-3327
9257-3300
9257-3301
9257-3302
9257-3346
9257-3347
9257-3328
9257-3303
9257-3329
9257-3330
9257-3304
9257-3331
9257-3305
9257-3332
9257-3333
9257-3348
9257-3306
9257-3349
9257-3307
9257-8350
9257-8351
9257-3308
9257-3334
9257-8352
9257-3309
9257-8353
9257-3310
9257-8354
9257-3335
9257-3311
9257-3336
9257-3312
9257-8355
42
44
45
46
48
54
60
62
63
64
66
68
70
72
74
78
80
82
83
84
89
90
91
93
96
98
99
102
105
108
111
112
114
117
120
121
21.00
22.00
22.50
23.00
24.00
27.00
30.00
31.00
31.50
32.00
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
42.00
44.50
45.00
45.50
46.50
48.00
49.00
49.50
51.00
52.50
54.00
55.50
56.00
57.00
58.50
60.00
60.50
.15
.15
.18
.15
.15
.20
.21
.22
.24
.25
.26
.27
.28
.30
.31
.32
.33
.34
.35
.37
.38
.39
.40
.42
.43
.44
.45
.49
.50
.51
.52
.53
.53
.54
.54
.55
630H150
645H150
655H150
660H150
670H150
700H150
730H150
750H150
775H150
780H150
800H150
810H150
820H150
840H150
850H150
900H150
950H150
960H150
1000H150
1100H150
1140H150
1180H150
1250H150
1325H150
1350H150
1365H150
1400H150
1510H150
1550H150
1645H150
1680H150
1700H150
2090H150
2100H150
2120H150
2330H150
9257-3313
9257-3337
9257-8356
9257-3314
9257-8357
9257-3315
9257-3338
9257-3316
9257-8358
9257-3339
9257-3317
9257-8359
9257-3340
9257-3341
9257-3318
9257-3319
9257-8360
9257-3342
9257-3320
9257-3321
9257-3343
9257-8361
9257-3322
9257-8362
9257-8363
9257-8364
9257-3323
9257-8365
9257-3344
9257-8366
9257-8367
9257-3324
9257-8368
9257-8369
9257-8370
9257-8371
126
129
131
132
134
140
146
150
155
156
160
162
164
168
170
180
190
192
200
220
228
236
250
265
270
273
280
302
310
329
336
340
418
420
424
466
63.00
64.50
65.50
66.00
67.00
70.00
73.00
75.00
77.50
78.00
80.00
81.00
82.00
84.00
85.00
90.00
95.00
96.00
100.00
110.00
114.00
118.00
125.00
132.50
135.00
136.50
140.00
151.00
155.00
164.50
168.00
170.00
209.00
210.00
212.00
233.00
.56
.57
.58
.59
.60
.61
.64
.70
.70
.70
.72
.74
.75
.75
.76
.82
.86
.87
.90
1.02
1.07
1.10
1.20
1.23
1.25
1.30
1.35
1.45
1.50
1.55
1.60
1.65
2.05
2.05
2.05
2.30
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
42
44
45
46
21.00
22.00
22.50
23.00
.15
.16
.19
.22
240H200
270H200
300H200
310H200
9257-3400
9257-3401
9257-3402
9257-3446
48
54
60
62
24.00
27.00
30.00
31.00
.23
.25
.30
.30
1/2" Pitch (.500"/H) — 2" Wide
Part
No.
Product
No.
210H200
220H200
225H200
230H200
9257-3425
9257-3426
9257-3445
9257-3427
®
Powering Progress.
gates.com/pt
43
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
315H200
320H200
330H200
340H200
350H200
360H200
370H200
390H200
400H200
410H200
415H200
420H200
445H200
450H200
455H200
465H200
480H200
490H200
495H200
510H200
525H200
540H200
555H200
560H200
570H200
585H200
600H200
605H200
630H200
645H200
655H200
660H200
9257-3447
9257-3428
9257-3403
9257-3429
9257-3430
9257-3404
9257-3431
9257-3405
9257-3432
9257-3433
9257-3448
9257-3406
9257-3449
9257-3407
9257-8450
9257-8451
9257-3408
9257-3434
9257-8452
9257-3409
9257-8453
9257-3410
9257-8454
9257-3435
9257-3411
9257-3436
9257-3412
9257-8455
9257-3413
9257-3437
9257-8456
9257-3414
63
64
66
68
70
72
74
78
80
82
83
84
89
90
91
93
96
98
99
102
105
108
111
112
114
117
120
121
126
129
131
132
31.50
32.00
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
42.00
44.50
45.00
45.50
46.50
48.00
49.00
49.50
51.00
52.50
54.00
55.50
56.00
57.00
58.50
60.00
60.50
63.00
64.50
65.50
66.00
.30
.30
.32
.35
.35
.37
.38
.40
.40
.42
.43
.45
.50
.50
.50
.50
.52
.53
.54
.57
.58
.60
.62
.63
.68
.69
.70
.70
.74
.75
.77
.78
670H200
700H200
730H200
750H200
775H200
780H200
800H200
810H200
820H200
840H200
850H200
900H200
950H200
960H200
1000H200
1100H200
1140H200
1180H200
1250H200
1325H200
1350H200
1365H200
1400H200
1510H200
1550H200
1645H200
1680H200
1700H200
2090H200
2100H200
2120H200
2330H200
9257-8457
9257-3415
9257-3438
9257-3416
9257-8458
9257-3439
9257-3417
9257-8459
9257-3440
9257-3441
9257-3418
9257-3419
9257-8460
9257-3442
9257-3420
9257-3421
9257-3443
9257-8461
9257-3422
9257-8462
9257-8463
9257-8464
9257-3423
9257-8465
9257-3444
9257-8466
9257-8467
9257-3424
9257-8468
9257-8469
9257-8470
9257-8471
134
140
146
150
155
156
160
162
164
168
170
180
190
192
200
220
228
236
250
265
270
273
280
302
310
329
336
340
418
420
424
466
67.00
70.00
73.00
75.00
77.50
78.00
80.00
81.00
82.00
84.00
85.00
90.00
95.00
96.00
100.00
110.00
114.00
118.00
125.00
132.50
135.00
136.50
140.00
151.00
155.00
164.50
168.00
170.00
209.00
210.00
212.00
233.00
.86
.84
.87
.90
.95
.95
.97
.99
1.00
1.04
1.05
1.12
1.20
1.22
1.25
1.40
1.47
1.55
1.64
1.75
1.77
1.80
1.85
2.00
2.10
2.20
2.25
2.30
2.80
2.85
2.90
3.20
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
42
44
45
46
48
54
60
62
63
64
66
68
70
72
74
78
80
82
83
84
89
90
91
93
21.00
22.00
22.50
23.00
24.00
27.00
30.00
31.00
31.50
32.00
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
42.00
44.50
45.00
45.50
46.50
.40
.40
.41
.42
.45
.50
.57
.58
.58
.60
.60
.60
.60
.65
.68
.70
.75
.75
.76
.75
.78
.79
.79
.83
480H300
490H300
495H300
510H300
525H300
540H300
555H300
560H300
570H300
585H300
600H300
605H300
630H300
645H300
655H300
660H300
670H300
700H300
730H300
750H300
775H300
780H300
800H300
810H300
9257-3508
9257-3534
9257-8552
9257-3509
9257-8553
9257-3510
9257-8554
9257-3535
9257-3511
9257-3536
9257-3512
9257-8555
9257-3513
9257-3537
9257-8556
9257-3514
9257-8557
9257-3515
9257-3538
9257-3516
9257-8558
9257-3539
9257-3517
9257-8559
96
98
99
102
105
108
111
112
114
117
120
121
126
129
131
132
134
140
146
150
155
156
160
162
48.00
49.00
49.50
51.00
52.50
54.00
55.50
56.00
57.00
58.50
60.00
60.50
63.00
64.50
65.50
66.00
67.00
70.00
73.00
75.00
77.50
78.00
80.00
81.00
.85
.86
.88
.89
.92
.97
.95
.97
.98
1.00
1.03
1.03
1.04
1.10
1.11
1.12
1.13
1.17
1.20
1.23
1.30
1.31
1.32
1.33
1/2" Pitch (.500"/H) — 3" Wide
44
Part
No.
Product
No.
210H300
220H300
225H300
230H300
240H300
270H300
300H300
310H300
315H300
320H300
330H300
340H300
350H300
360H300
370H300
390H300
400H300
410H300
415H300
420H300
445H300
450H300
455H300
465H300
9257-3525
9257-3526
9257-3545
9257-3527
9257-3500
9257-3501
9257-3502
9257-3546
9257-3547
9257-3528
9257-3503
9257-3529
9257-3530
9257-3504
9257-3531
9257-3505
9257-3532
9257-3533
9257-3548
9257-3506
9257-3549
9257-3507
9257-8550
9257-8551
gates.com/pt
Gates Corporation
®
June 2012
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
820H300
840H300
850H300
900H300
950H300
960H300
1000H300
1100H300
1140H300
1180H300
1250H300
1325H300
9257-3540
9257-3541
9257-3518
9257-3519
9257-8560
9257-3542
9257-3520
9257-3521
9257-3543
9257-8561
9257-3522
9257-8562
164
168
170
180
190
192
200
220
228
236
250
265
82.00
84.00
85.00
90.00
95.00
96.00
100.00
110.00
114.00
118.00
125.00
132.50
1.34
1.35
1.35
1.44
1.50
1.50
1.60
1.77
1.80
1.85
1.95
2.05
1350H300
1365H300
1400H300
1510H300
1550H300
1645H300
1680H300
1700H300
2090H300
2100H300
2120H300
2330H300
9257-8563
9257-8564
9257-3523
9257-8565
9257-3544
9257-8566
9257-8567
9257-3524
9257-8568
9257-8569
9257-8570
9257-8571
270
273
280
302
310
329
336
340
418
420
424
466
135.00
136.50
140.00
151.00
155.00
164.50
168.00
170.00
209.00
210.00
212.00
233.00
2.13
3.19
2.20
2.40
2.44
2.60
2.62
2.65
3.25
3.30
3.33
3.70
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
58
64
72
80
88
96
50.75
56.00
63.00
70.00
77.00
84.00
2.40
2.60
2.85
3.25
3.50
3.70
980XH200
1120XH200
1260XH200
1400XH200
1540XH200
1750XH200
9257-4106
9257-4107
9257-4108
9257-4109
9257-4110
9257-4111
112
128
144
160
176
200
98.00
112.00
126.00
140.00
154.00
175.00
4.10
4.60
5.10
5.60
3.95
6.90
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
58
64
72
80
88
96
50.75
56.00
63.00
70.00
77.00
84.00
3.60
3.80
4.20
4.60
4.90
5.20
980XH300
1120XH300
1260XH300
1400XH300
1540XH300
1750XH300
9257-4206
9257-4207
9257-4208
9257-4209
9257-4210
9257-4211
112
128
144
160
176
200
98.00
112.00
126.00
140.00
154.00
175.00
6.00
6.70
7.30
7.90
7.10
9.60
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
58
64
72
80
88
96
50.75
56.00
63.00
70.00
77.00
84.00
4.60
4.90
5.25
5.70
6.25
6.60
980XH400
1120XH400
1260XH400
1400XH400
1540XH400
1750XH400
9257-4306
9257-4307
9257-4308
9257-4309
9257-4310
9257-4311
112
128
144
160
176
200
98.00
112.00
126.00
140.00
154.00
175.00
7.30
8.15
9.00
9.80
10.70
11.80
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
70.00
80.00
90.00
100.00
4.00
4.45
4.90
5.55
1200XXH200
1400XXH200
1600XXH200
1800XXH200
9257-5104
9257-5105
9257-5106
9257-5107
96
112
128
144
120.00
140.00
160.00
180.00
6.35
7.25
8.05
8.95
Part
No.
7/8" Pitch (.875"/XH) — 2" Wide
Part
No.
Product
No.
507XH200
560XH200
630XH200
700XH200
770XH200
840XH200
9257-4100
9257-4101
9257-4102
9257-4103
9257-4104
9257-4105
7/8" Pitch (.875"/XH) — 3" Wide
Part
No.
Product
No.
507XH300
560XH300
630XH300
700XH300
770XH300
840XH300
9257-4200
9257-4201
9257-4202
9257-4203
9257-4204
9257-4205
7/8" Pitch (.875"/XH) — 4" Wide
Part
No.
Product
No.
507XH400
560XH400
630XH400
700XH400
770XH400
840XH400
9257-4300
9257-4301
9257-4302
9257-4303
9257-4304
9257-4305
1 1/4" Pitch (1.250"/XXH) — 2" Wide
Part
No.
Product
No.
700XXH200
800XXH200
900XXH200
1000XXH200
9257-5100
9257-5101
9257-5102
9257-5103
®
Powering Progress.
No. of
Teeth
56
64
72
80
gates.com/pt
45
June 2012
1 1/4" Pitch (1.250"/XXH) — 3" Wide
Part
No.
Product
No.
700XXH300
800XXH300
900XXH300
1000XXH300
9257-5200
9257-5201
9257-5202
9257-5203
No. of
Teeth
56
64
72
80
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
70.00
80.00
90.00
100.00
5.70
6.40
6.85
7.55
1200XXH300
1400XXH300
1600XXH300
1800XXH300
9257-5204
9257-5205
9257-5206
9257-5207
96
112
128
144
120.00
140.00
160.00
180.00
8.80
10.35
11.30
12.60
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
70.00
80.00
90.00
100.00
7.02
7.95
9.00
10.05
1200XXH400
1400XXH400
1600XXH400
1800XXH400
9257-5304
9257-5305
9257-5306
9257-5307
96
112
128
144
120.00
140.00
160.00
180.00
11.60
13.60
15.50
17.30
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
70.00
80.00
90.00
100.00
8.75
9.60
10.80
12.00
1200XXH500
1400XXH500
1600XXH500
1800XXH500
9257-5404
9257-5405
9257-5406
9257-5407
96
112
128
144
120.00
140.00
160.00
180.00
14.00
16.15
18.05
20.15
1 1/4" Pitch (1.250"/XXH) — 4" Wide
Part
No.
Product
No.
700XXH400
800XXH400
900XXH400
1000XXH400
9257-5300
9257-5301
9257-5302
9257-5303
No. of
Teeth
56
64
72
80
1 1/4" Pitch (1.250"/XXH) — 5" Wide
46
Part
No.
Product
No.
700XXH500
800XXH500
900XXH500
1000XXH500
9257-5400
9257-5401
9257-5402
9257-5403
gates.com/pt
No. of
Teeth
56
64
72
80
Gates Corporation
®
June 2012
Cotton Cleaner Belts
Cotton cleaner belts have a trapezoidal tooth profile and now
KEVLAR® tensile cords.
Cotton Cleaner belts are specifically designed for use on Cotton Gin
and inclined cleaner machines.
Features/Advantages
n KEVLAR tensile cords for increased shock resistance.
n Long service life in harsh environments.
Recommended Pulleys—Contact the Gates Made-To-Order Metals Team.
1" Pitch
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
61CCB142K
9259-3831
60 61.07
1.34
63CCB165K
9259-3832
63 63.00
1.41
64CCB170K
9259-3833
64 63.95
1.50
65CCB175K
9259-3834
65 64.95
1.46
NOTE: Steel tensile cord available as a made to order product. Lead time and
minimum order quantities apply. Contact Customer Service for availability.
®
Powering Progress.
gates.com/pt
47
June 2012
PowerGrip® GT®2 Twin Power® Belts - 3MR and 5MR
Twin Power® belts have teeth on both sides to provide
synchronization from both driving surfaces.
PowerGrip® GT®2 Twin Power® belts are ideal for many
applications including data storage, machine tool, hand power
tools, postage handling, medicine diagnostic, sewing machines,
ticket dispensers, robotics, vending machines and vacuum
cleaners.
Features/Advantages
n Gates Twin Power® belts have nylon facing on both tooth
surfaces providing equal load carrying capabilities on either
side of belt.
n Belt capacity is equal to standard single-sided PowerGrip®
belts.
n Eliminates lubrication and re-tensioning to reduce maintenance and labor required on the drive.
PowerGrip® GT®2 Sprockets - 3MR
5M Sprockets - PowerGrip® GT®2 and Poly Chain® GT®
Notes
PowerGrip® GT®2 Twin Power® belts in standard width are Standard/Non-Stock. Minimum order quantities are not required on standard
widths.
TWIN POWER BELTS
3MR GT2 Standard Belt Widths
5MR GT2 Standard Belt Widths
Belt Width
Code
Belt Width
(mm)
Belt Width
(In.)
Belt Width
Code
Belt Width
(mm)
Belt Width
(In.)
06
09
15
6
9
15
0.236
0.354
0.591
09
15
25
9
15
25
0.354
0.591
0.984
PowerGrip GT2 Twin Power part numbers are comprised of pitch, pitch length and width. For example; part number TP3MR-426-06 denotes “TP”
for Twin Power, 3mm pitch, 426mm pitch length and 6mm width.
Belt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt. Belt pitch length is the total
length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a PowerGrip GT2 Twin Power belt lies within
the tensile member.
3MR - Twin Power Belts
48
Part
No.
Pitch
Length
(mm)
Pitch
Length
(In.)
No. of
Teeth
TP3MR-381
TP3MR-396
TP3MR-399
TP3MR-405
TP3MR-411
TP3MR-420
TP3MR-426
TP3MR-432
TP3MR-435
TP3MR-447
TP3MR-465
TP3MR-468
TP3MR-471
TP3MR-474
TP3MR-480
TP3MR-486
TP3MR-489
TP3MR-492
TP3MR-501
381
396
399
405
411
420
426
432
435
447
465
468
471
474
480
486
489
492
501
15.00
15.59
15.71
15.94
16.18
16.54
16.77
17.01
17.13
17.60
18.31
18.43
18.54
18.66
18.90
19.13
19.25
19.37
19.72
127
132
133
135
137
140
142
144
145
149
155
156
157
158
160
162
163
164
167
gates.com/pt
Part
No.
Pitch
Length
(mm)
Pitch
Length
(In.)
No. of
Teeth
TP3MR-510
TP3MR-513
TP3MR-519
TP3MR-525
TP3MR-528
TP3MR-531
TP3MR-537
TP3MR-552
TP3MR-558
TP3MR-564
TP3MR-570
TP3MR-576
TP3MR-585
TP3MR-591
TP3MR-597
TP3MR-600
TP3MR-606
TP3MR-609
TP3MR-612
510
513
519
525
528
531
537
552
558
564
570
576
585
591
597
600
606
609
612
20.08
20.20
20.43
20.67
20.79
20.91
21.14
21.73
21.97
22.20
22.44
22.68
23.03
23.27
23.50
23.62
23.86
23.98
24.09
170
171
173
175
176
177
179
184
186
188
190
192
195
197
199
200
202
203
204
Part
No.
Pitch
Length
(mm)
Pitch
Length
(In.)
No. of
Teeth
TP3MR-627
TP3MR-633
TP3MR-639
TP3MR-645
TP3MR-648
TP3MR-654
TP3MR-657
TP3MR-663
TP3MR-669
TP3MR-684
TP3MR-687
TP3MR-696
TP3MR-711
TP3MR-735
TP3MR-738
TP3MR-750
TP3MR-753
TP3MR-786
TP3MR-795
627
633
639
645
648
654
657
663
669
684
687
696
711
735
738
750
753
786
795
24.69
24.92
25.16
25.39
25.51
25.75
25.87
26.10
26.34
26.93
27.05
27.40
27.99
28.94
29.06
29.53
29.65
30.94
31.30
209
211
213
215
216
218
219
221
223
228
229
232
237
245
246
250
251
262
265
Gates Corporation
®
June 2012
PowerGrip® GT®2 Twin Power® Belts - 3MR and 5MR
3MR - Twin Power Belts (continued)
Part
No.
Pitch
Length
(mm)
Pitch
Length
(In.)
No. of
Teeth
TP3MR-822
TP3MR-837
TP3MR-840
TP3MR-843
TP3MR-873
TP3MR-882
TP3MR-891
TP3MR-900
TP3MR-915
TP3MR-945
TP3MR-951
822
837
840
843
873
882
891
900
915
945
951
32.36
32.95
33.07
33.19
34.37
34.72
35.08
35.43
36.02
37.20
37.44
274
279
280
281
291
294
297
300
305
315
317
Part
No.
Pitch
Length
(mm)
Pitch
Length
(In.)
No. of
Teeth
TP3MR-981
TP3MR-1002
TP3MR-1026
TP3MR-1035
TP3MR-1050
TP3MR-1056
TP3MR-1062
TP3MR-1080
TP3MR-1125
TP3MR-1155
TP3MR-1191
981
1002
1026
1035
1050
1056
1062
1080
1125
1155
1191
38.62
39.45
40.39
40.74
41.34
41.57
41.81
42.52
44.29
45.47
46.89
327
334
342
345
350
352
354
360
375
385
397
Part
No.
Pitch
Length
(mm)
Pitch
Length
(In.)
No. of
Teeth
TP5MR-835
TP5MR-850
TP5MR-870
TP5MR-890
TP5MR-900
TP5MR-925
TP5MR-950
TP5MR-975
TP5MR-985
TP5MR-1000
TP5MR-1050
TP5MR-1115
TP5MR-1125
TP5MR-1150
TP5MR-1195
TP5MR-1250
TP5MR-1270
TP5MR-1295
TP5MR-1300
TP5MR-1375
TP5MR-1420
835
850
870
890
900
925
950
975
985
1000
1050
1115
1125
1150
1195
1250
1270
1295
1300
1375
1420
32.87
33.46
34.25
35.04
35.43
36.42
37.40
38.39
38.78
39.37
41.34
43.91
44.29
45.28
47.05
49.21
50.00
50.98
51.18
54.13
55.91
167
170
174
178
180
185
190
195
197
200
210
223
225
230
239
250
254
259
260
275
284
Part
No.
Pitch
Length
(mm)
Pitch
Length
(In.)
No. of
Teeth
TP3MR-1263
TP3MR-1335
TP3MR-1500
TP3MR-1512
TP3MR-1536
TP3MR-1587
TP3MR-1956
TP3MR-2004
TP3MR-2061
1263
1335
1500
1512
1536
1587
1956
2004
2061
49.72
52.56
59.06
59.53
60.47
62.48
77.01
78.90
81.14
421
445
500
504
512
529
652
668
687
Part
No.
Pitch
Length
(mm)
Pitch
Length
(In.)
No. of
Teeth
TP5MR-1450
TP5MR-1575
TP5MR-1595
TP5MR-1635
TP5MR-1690
TP5MR-1790
TP5MR-1800
TP5MR-1895
TP5MR-1945
TP5MR-2000
TP5MR-2110
TP5MR-2250
TP5MR-2525
TP5MR-2760
TP5MR-3120
TP5MR-3170
TP5MR-3200
TP5MR-3430
TP5MR-3800
1450
1575
1595
1635
1690
1790
1800
1895
1945
2000
2110
2250
2525
2760
3120
3170
3200
3430
3800
57.09
62.01
62.80
64.37
66.54
70.47
70.87
74.61
76.57
78.74
83.07
88.58
99.41
108.66
122.83
124.80
125.98
135.04
149.61
5MR - Twin Power Belts
Pitch
Length
(mm)
Pitch
Length
(In.)
No. of
Teeth
TP5MR-400
TP5MR-425
TP5MR-450
TP5MR-500
TP5MR-535
TP5MR-565
TP5MR-575
TP5MR-580
TP5MR-600
TP5MR-625
TP5MR-650
TP5MR-700
TP5MR-710
TP5MR-740
TP5MR-745
TP5MR-750
TP5MR-765
TP5MR-790
TP5MR-800
TP5MR-815
TP5MR-830
400
425
450
500
535
565
575
580
600
625
650
700
710
740
745
750
765
790
800
815
830
15.75
16.73
17.72
19.69
21.06
22.24
22.64
22.83
23.62
24.61
25.69
27.56
27.95
29.13
29.33
29.53
30.12
31.10
31.50
32.09
32.68
80
85
90
100
107
113
115
116
120
125
130
140
142
148
149
150
153
158
160
163
166
®
Powering Progress.
gates.com/pt
290
315
319
327
338
358
360
379
389
400
422
450
505
552
624
634
640
686
760
49
TWIN POWER BELTS
Part
No.
June 2012
PowerGrip® GT®2 Twin Power® Belts
Twin Power belts have teeth on both sides to provide
PowerGrip GT2 Twin Power belts are ideal for serpentine
applications requiring rotation reversal or synchronization of
driven shafts. Ideal for use in industries such as textile, paper,
packaging and printing.
Features/Advantages
n Gates Twin Power belts have nylon facing on both tooth
surfaces providing equal load carrying capabilities on either
side of belt.
n Belt capacity is equal to standard single-sided PowerGrip GT2
belts.
TWIN POWER BELTS
Notes
If you currently use PowerGrip HTD Twin Power belts, consider PowerGrip GT2 Twin Power belts at reduced widths to lower your costs.
PowerGrip GT2 Twin Power part numbers are comprised of pitch, pitch length and width. For example; part number TP4400-8MGT-30 denotes
a “TP” for Twin Power, 4400mm pitch length, 8mm pitch and 30mm width.
total length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a PowerGrip GT2 Twin Power belt lies
within the tensile member.
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP560-8MGT-20
TP600-8MGT-20
TP640-8MGT-20
TP720-8MGT-20
TP800-8MGT-20
TP840-8MGT-20
TP880-8MGT-20
TP920-8MGT-20
TP960-8MGT-20
TP1040-8MGT-20
2
TP1064-8MGT-20
TP1120-8MGT-20
TP1160-8MGT-20
TP1200-8MGT-20
TP1224-8MGT-20
9232-0005
9232-0009
9232-0013
9232-0017
9232-0021
9232-1025
9232-0025
9232-1001
9232-0029
9232-0033
9232-1005
9232-0037
9232-2049
9232-0041
9232-1029
70
75
80
90
100
105
110
115
120
130
133
140
146
150
153
22.05
23.62
25.20
28.35
31.50
33.08
34.65
36.23
37.80
40.95
41.89
44.10
45.83
47.25
48.20
.16
.17
.18
.20
.24
.25
.26
.27
.28
.30
.32
.33
.66
.35
.36
TP1280-8MGT-20
TP1440-8MGT-20
TP1512-8MGT-20
TP1600-8MGT-20
TP1760-8MGT-20
TP1800-8MGT-20
TP2000-8MGT-20
TP2200-8MGT-20
TP2400-8MGT-20
TP2600-8MGT-20
TP2800-8MGT-20
TP3048-8MGT-20
TP3280-8MGT-20
TP3600-8MGT-20
TP4400-8MGT-20
9232-0045
9232-0049
9232-1013
9232-0053
9232-0057
9232-0061
9232-0065
9232-1033
9232-0069
9232-0077
9232-0073
9232-0081
9232-0085
9232-0089
9232-0093
160
180
189
200
220
225
250
275
300
325
350
381
410
450
550
50.40
56.70
59.53
63.00
69.30
70.88
78.75
86.63
94.50
102.38
110.25
120.02
129.15
141.75
173.25
.36
.42
.43
.46
.50
.52
.60
.65
.70
.74
.80
.87
.93
1.02
1.25
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
9232-0006
9232-0010
9232-0014
9232-0018
9232-0022
9232-1026
9232-0026
9232-1002
70
75
80
90
100
105
110
115
22.05
23.62
25.20
28.35
31.50
33.08
34.65
36.23
.26
.28
.30
.34
.37
.38
.40
.42
TP960-8MGT-30
TP1040-8MGT-30
2
TP1064-8MGT-30
TP1120-8MGT-30
TP1160-8MGT-30
TP1200-8MGT-30
TP1224-8MGT-30
TP1280-8MGT-30
9232-0030
9232-0034
9232-1006
9232-0038
9232-1010
9232-0042
9232-1030
9232-0046
120
130
133
140
146
150
153
160
37.80
40.95
41.89
44.10
45.83
47.25
48.20
50.40
.45
.47
.49
.50
.53
.55
.56
.60
2
Part
No.
2
2
50
TP560-8MGT-30
TP600-8MGT-30
TP640-8MGT-30
TP720-8MGT-30
TP800-8MGT-30
TP840-8MGT-30
TP880-8MGT-30
TP920-8MGT-30
MTO Minimum Required. Check with Customer Service for availability.
gates.com/pt
Gates Corporation
®
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP1440-8MGT-30
TP1512-8MGT-30
TP1600-8MGT-30
TP1760-8MGT-30
TP1800-8MGT-30
TP2000-8MGT-30
TP2200-8MGT-30
9232-0050
9232-1014
9232-0054
9232-0058
9232-0062
9232-0066
9232-1034
180
189
200
220
225
250
275
56.70
59.53
63.00
69.30
70.88
78.75
86.63
.65
.66
.71
.78
.80
.90
.96
TP2400-8MGT-30
TP2600-8MGT-30
TP2800-8MGT-30
TP3048-8MGT-30
TP3280-8MGT-30
TP3600-8MGT-30
TP4400-8MGT-30
9232-0070
9232-0078
9232-0074
9232-0082
9232-0086
9232-0090
9232-0094
300
325
350
381
410
450
550
94.50
102.38
110.25
120.02
129.15
141.75
173.25
1.04
1.14
1.20
1.32
1.45
1.55
1.90
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP560-8MGT-50
TP600-8MGT-50
TP640-8MGT-50
TP720-8MGT-50
TP800-8MGT-50
TP840-8MGT-50
TP880-8MGT-50
TP920-8MGT-50
TP960-8MGT-50
TP1040-8MGT-50
2
TP1064-8MGT-50
TP1120-8MGT-50
TP1160-8MGT-50
TP1200-8MGT-50
2
TP1224-8MGT-50
9232-0007
9232-0011
9232-0015
9232-0019
9232-0023
9232-1027
9232-0027
9232-1003
9232-0031
9232-0035
9232-1007
9232-0039
9232-1011
9232-0043
9232-1031
70
75
80
90
100
105
110
115
120
130
133
140
146
150
153
22.05
23.62
25.20
28.35
31.50
33.08
34.65
36.23
37.80
40.95
41.89
44.10
45.83
47.25
48.20
.42
.47
.50
.55
.60
.67
.68
.73
.74
.78
.80
.86
.83
.90
.92
TP1280-8MGT-50
TP1440-8MGT-50
TP1512-8MGT-50
TP1600-8MGT-50
TP1760-8MGT-50
TP1800-8MGT-50
TP2000-8MGT-50
TP2200-8MGT-50
TP2400-8MGT-50
TP2600-8MGT-50
TP2800-8MGT-50
TP3048-8MGT-50
TP3280-8MGT-50
TP3600-8MGT-50
TP4400-8MGT-50
9232-0047
9232-0051
9232-1015
9232-0055
9232-0059
9232-0063
9232-0067
9232-1035
9232-0071
9232-0079
9232-0075
9232-0083
9232-0087
9232-0091
9232-0095
160
180
189
200
220
225
250
275
300
325
350
381
410
450
550
50.40
56.70
59.53
63.00
69.30
70.88
78.75
86.63
94.50
102.38
110.25
120.02
129.15
141.75
173.25
.95
1.10
1.11
1.20
1.30
1.30
1.45
1.60
1.80
1.90
2.00
2.20
2.40
2.60
3.20
2
TWIN POWER BELTS
Part
No.
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP560-8MGT-85
TP600-8MGT-85
TP640-8MGT-85
TP720-8MGT-85
TP800-8MGT-85
TP840-8MGT-85
TP880-8MGT-85
TP920-8MGT-85
TP960-8MGT-85
TP1040-8MGT-85
TP1064-8MGT-85
TP1120-8MGT-85
TP1160-8MGT-85
TP1200-8MGT-85
2
TP1224-8MGT-85
9232-0008
9232-0012
9232-0016
9232-0020
9232-0024
9232-1028
9232-0028
9232-1004
9232-1008
9232-0036
9232-2048
9232-0040
9232-1012
9232-0044
9232-1032
70
75
80
90
100
105
110
115
120
130
133
140
146
150
153
22.05
23.62
25.20
28.35
31.50
33.08
34.65
36.23
37.80
40.95
41.89
44.10
45.83
47.25
48.20
1.32
1.42
1.52
1.70
1.90
1.98
2.08
2.17
2.27
2.46
2.50
2.65
2.76
2.84
2.89
TP1280-8MGT-85
TP1440-8MGT-85
2
TP1512-8MGT-85
TP1600-8MGT-85
TP1760-8MGT-85
TP1800-8MGT-85
TP2000-8MGT-85
TP2200-8MGT-85
TP2400-8MGT-85
TP2600-8MGT-85
TP2800-8MGT-85
TP3048-8MGT-85
TP3280-8MGT-85
TP3600-8MGT-85
TP4400-8MGT-85
9232-0048
9232-0052
9232-1016
9232-0056
9232-0060
9232-0064
9232-0068
9232-1036
9232-0072
9232-0080
9232-0076
9232-0084
9232-0088
9232-0092
9232-0096
160
180
189
200
220
225
250
275
300
325
350
381
410
450
550
50.40
56.70
59.53
63.00
69.30
70.88
78.75
86.63
94.50
102.38
110.25
120.02
129.15
141.75
173.25
3.04
3.42
3.56
3.80
4.16
4.30
4.74
5.20
5.68
6.18
6.64
7.24
7.78
8.50
10.44
2
2
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP966-14MGT-40
TP1190-14MGT-40
TP1400-14MGT-40
TP1610-14MGT-40
TP1778-14MGT-40
TP1890-14MGT-40
TP2100-14MGT-40
TP2310-14MGT-40
9232-0100
9232-0105
9232-0110
9232-0115
9232-0120
9232-0125
9232-0130
9232-0135
69
85
100
115
127
135
150
165
38.03
46.85
55.12
63.38
70.00
74.41
82.67
90.94
2.20
2.40
2.50
2.80
3.00
3.10
3.30
3.40
TP2450-14MGT-40
TP2590-14MGT-40
TP2800-14MGT-40
TP3150-14MGT-40
TP3360-14MGT-40
TP3500-14MGT-40
TP3850-14MGT-40
TP4326-14MGT-40
9232-0140
9232-0145
9232-0150
9232-0155
9232-0180
9232-0160
9232-0165
9232-0170
175
185
200
225
240
250
275
309
96.45
101.96
110.23
124.01
132.28
137.79
151.57
170.31
3.60
3.85
3.95
4.30
4.50
4.70
5.10
5.40
®
Powering Progress.
gates.com/pt
51
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP4578-14MGT-40
TP4956-14MGT-40
TP5320-14MGT-40
9232-0175
9232-0185
9232-0190
327
354
380
180.23
195.12
209.45
5.70
6.20
6.50
TP5740-14MGT-40
TP6160-14MGT-40
TP6860-14MGT-40
9232-0195
9232-0200
9232-0205
410
440
490
225.98
242.52
270.08
6.90
7.40
8.00
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP966-14MGT-55
TP1190-14MGT-55
TP1400-14MGT-55
TP1610-14MGT-55
TP1778-14MGT-55
TP1890-14MGT-55
TP2100-14MGT-55
TP2310-14MGT-55
TP2450-14MGT-55
TP2590-14MGT-55
TP2800-14MGT-55
9232-0101
9232-0106
9232-0111
9232-0116
9232-0121
9232-0126
9232-0131
9232-0136
9232-0141
9232-0146
9232-0151
69
85
100
115
127
135
150
165
175
185
200
38.03
46.85
55.12
63.38
70.00
74.41
82.67
90.94
96.45
101.96
110.23
3.50
3.80
3.90
4.10
4.30
4.52
4.60
4.90
5.10
5.20
5.40
TP3150-14MGT-55
TP3360-14MGT-55
TP3500-14MGT-55
TP3850-14MGT-55
TP4326-14MGT-55
TP4578-14MGT-55
TP4956-14MGT-55
TP5320-14MGT-55
TP5740-14MGT-55
TP6160-14MGT-55
TP6860-14MGT-55
9232-0156
9232-0181
9232-0161
9232-0166
9232-0171
9232-0176
9232-0186
9232-0191
9232-0196
9232-0201
9232-0206
225
240
250
275
309
327
354
380
410
440
490
124.01
132.28
137.79
151.57
170.31
180.23
195.12
209.45
225.98
242.52
270.08
5.70
5.90
6.00
6.50
7.00
7.20
7.60
8.00
8.40
8.80
9.50
TWIN POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP966-14MGT-85
TP1190-14MGT-85
TP1400-14MGT-85
TP1610-14MGT-85
TP1778-14MGT-85
TP1890-14MGT-85
TP2100-14MGT-85
TP2310-14MGT-85
TP2450-14MGT-85
TP2590-14MGT-85
TP2800-14MGT-85
9232-0102
9232-0107
9232-0112
9232-0117
9232-0122
9232-0127
9232-0132
9232-0137
9232-0142
9232-0147
9232-0152
69
85
100
115
127
135
150
165
175
185
200
38.03
46.85
55.12
63.38
70.00
74.41
82.67
90.94
96.45
101.96
110.23
2.30
2.80
3.20
3.80
4.25
4.50
5.00
5.50
5.80
6.10
6.80
TP3150-14MGT-85
TP3360-14MGT-85
TP3500-14MGT-85
TP3850-14MGT-85
TP4326-14MGT-85
TP4578-14MGT-85
TP4956-14MGT-85
TP5320-14MGT-85
TP5740-14MGT-85
TP6160-14MGT-85
TP6860-14MGT-85
9232-0157
9232-0182
9232-0162
9232-0167
9232-0172
9232-0177
9232-0187
9232-0192
9232-0197
9232-0202
9232-0207
225
240
250
275
309
327
354
380
410
440
490
124.01
132.28
137.79
151.57
170.31
180.23
195.12
209.45
225.98
242.52
270.08
7.70
7.90
8.20
9.20
10.40
10.70
11.70
12.50
13.50
14.50
16.30
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP2590-14MGT-115
TP2800-14MGT-115
TP3150-14MGT-115
TP3360-14MGT-115
TP3500-14MGT-115
TP3850-14MGT-115
TP4326-14MGT-115
TP4578-14MGT-115
9232-0148
9232-0153
9232-0158
9232-0183
9232-0163
9232-0168
9232-0173
9232-0178
185
200
225
240
250
275
309
327
101.96
110.23
124.01
132.28
137.79
151.57
170.31
180.23
8.60
9.30
10.60
11.20
11.50
12.70
14.30
15.00
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP966-14MGT-115
TP1190-14MGT-115
TP1400-14MGT-115
TP1610-14MGT-115
TP1778-14MGT-115
TP1890-14MGT-115
TP2100-14MGT-115
TP2310-14MGT-115
TP2450-14MGT-115
9232-0103
9232-0108
9232-0113
9232-0118
9232-0123
9232-0128
9232-0133
9232-0138
9232-0143
69
85
100
115
127
135
150
165
175
38.03
46.85
55.12
63.38
70.00
74.41
82.67
90.94
96.45
3.50
4.20
4.80
5.50
6.00
6.40
7.00
7.70
8.20
52
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP966-14MGT-170
TP1190-14MGT-170
TP1400-14MGT-170
TP1610-14MGT-170
TP1778-14MGT-170
TP1890-14MGT-170
9232-0104
9232-0109
9232-0114
9232-0119
9232-0124
9232-0129
69
85
100
115
127
135
38.03
46.85
55.12
63.38
70.00
74.41
5.00
6.00
7.00
7.80
8.50
9.00
TP2100-14MGT-170
TP2310-14MGT-170
TP2450-14MGT-170
TP2590-14MGT-170
TP2800-14MGT-170
TP3150-14MGT-170
9232-0134
9232-0139
9232-0144
9232-0149
9232-0154
9232-0159
150
165
175
185
200
225
82.67
90.94
96.45
101.96
110.23
124.01
10.00
10.70
11.40
12.00
13.00
14.50
gates.com/pt
Gates Corporation
®
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP3360-14MGT-170
TP3500-14MGT-170
TP3850-14MGT-170
9232-0184
9232-0164
9232-0169
240
250
275
132.28
137.79
151.57
15.40
15.80
17.50
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP4326-14MGT-170
TP4578-14MGT-170
9232-0174
9232-0179
309
327
170.31
180.23
19.50
20.50
TWIN POWER BELTS
®
Powering Progress.
gates.com/pt
53
June 2012
PowerGrip® HTD® Twin Power® Belts
Twin Power® belts have teeth on both sides to provide
PowerGrip® HTD® Twin Power® belts are suitable for many
applications including data storage, hand power tools, postage
handling, food processors, office machines, centrifuges, money
handling, medicine diagnostic, sewing machines, ticket
dispensers, robotics, vending machines and vacuum cleaners.
Features/Advantages
n Gates Twin Power® belts have nylon facing on both tooth
surfaces providing equal load carrying capabilities on either side
of the belt.
n Belt capacity is equal to standard single-sided PowerGrip®
HTD® belts.
n Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor.
PowerGrip® HTD® Sprockets
Notes
PowerGrip® HTD® Twin Power® belts in standard widths are Standard/Non-Stock. Minimum order quantities are not required on standard
widths.
TWIN POWER BELTS
3M HTD Standard Belt Widths
5M HTD Standard Belt Widths
Belt Width
Code
Belt Width
(mm)
Belt Width
(In.)
Belt Width
Code
Belt Width
(mm)
Belt Width
(In.)
06
09
15
6
9
15
0.236
0.354
0.591
09
15
25
9
15
25
0.354
0.591
0.984
PowerGrip HTD Twin Power part numbers are comprised of pitch, pitch length and width. For example; part number TP444-3M-09 denotes “TP”
for Twin Power, 444mm pitch length, 3mm pitch and 9mm width.
Belt pitch is the distance in millimeters between two adjacent tooth centers as measured on the pitch line of the belt. Belt pitch length is the total
length (circumference) in millimeters as measured along the pitch line. The theoretical pitch line of a PowerGrip HTD Twin Power belt lies within
the tensile member.
3mm Pitch
54
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Pitch
Length
(mm)
TP381-3M
TP396-3M
TP399-3M
TP405-3M
TP411-3M
TP417-3M
TP420-3M
TP426-3M
TP432-3M
TP435-3M
TP438-3M
TP447-3M
TP468-3M
TP471-3M
TP474-3M
TP480-3M
TP486-3M
TP489-3M
TP492-3M
127
132
133
135
137
139
140
142
144
145
146
149
156
157
158
160
162
163
164
15.00
15.59
15.71
15.94
16.18
16.42
16.54
16.77
17.01
17.13
17.24
17.60
18.43
18.54
18.66
18.90
19.13
19.25
19.37
381
396
399
404
410
417
420
425
432
435
437
447
468
470
473
480
485
488
492
TP501-3M
TP510-3M
TP513-3M
TP525-3M
TP528-3M
TP531-3M
TP537-3M
TP558-3M
TP564-3M
TP570-3M
TP576-3M
TP585-3M
TP591-3M
TP597-3M
TP600-3M
TP606-3M
TP609-3M
TP612-3M
TP627-3M
167
170
171
175
176
177
179
186
188
190
192
195
197
199
200
202
203
204
209
19.72
20.08
20.20
20.67
20.79
20.91
21.14
21.97
22.20
22.44
22.68
23.03
23.07
23.50
23.62
23.86
23.98
24.09
24.69
500
510
513
525
528
531
536
558
563
569
576
584
585
596
599
606
609
611
627
TP633-3M
TP639-3M
TP645-3M
TP648-3M
TP654-3M
TP657-3M
TP663-3M
TP669-3M
TP684-3M
TP687-3M
TP696-3M
TP711-3M
TP735-3M
TP738-3M
TP753-3M
TP795-3M
TP822-3M
TP837-3M
TP843-3M
211
213
215
216
218
219
221
223
228
229
232
237
245
246
251
265
274
279
281
24.92
25.16
25.39
25.51
25.75
25.87
26.10
26.34
26.93
27.05
27.40
27.99
28.94
29.06
29.65
31.30
32.36
32.95
33.19
632
639
644
647
657
662
669
669
684
687
695
710
735
738
753
795
821
836
843
gates.com/pt
Gates Corporation
®
June 2012
PowerGrip® HTD® Twin Power® Belts
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Pitch
Length
(mm)
TP873-3M
TP882-3M
TP891-3M
TP900-3M
TP915-3M
TP945-3M
TP951-3M
291
294
297
300
305
315
317
34.37
34.72
35.08
35.43
36.02
37.20
37.44
873
881
891
899
914
944
950
TP981-3M
TP1002-3M
TP1026-3M
TP1035-3M
TP1062-3M
TP1125-3M
TP1155-3M
327
334
342
345
354
375
385
38.62
39.45
40.39
40.75
41.81
44.29
45.47
980
1002
1025
1035
1061
1124
1154
TP1191-3M
TP1263-3M
TP1500-3M
TP1512-3M
TP1587-3M
TP1956-3M
TP2004-3M
397
421
500
504
529
652
668
46.89
49.72
59.06
59.53
62.48
77.01
78.90
1191
1262
1500
1512
1587
1956
2004
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Pitch
Length
(mm)
TP400-5M
TP415-5M
TP425-5M
TP450-5M
TP460-5M
TP475-5M
TP480-5M
TP495-5M
TP500-5M
TP520-5M
TP535-5M
TP555-5M
TP565-5M
TP580-5M
TP585-5M
TP600-5M
TP615-5M
TP635-5M
TP655-5M
TP665-5M
TP670-5M
TP680-5M
TP685-5M
80
83
85
90
92
95
96
99
100
104
107
111
113
116
117
120
123
127
131
133
134
136
137
15.75
16.34
16.73
17.72
18.11
18.70
18.90
19.49
19.69
20.47
21.06
21.85
22.24
22.83
23.03
23.62
24.21
25.00
25.79
26.18
26.38
26.77
29.97
400
415
425
450
460
475
480
495
500
520
535
555
565
580
585
600
615
635
655
665
671
680
685
TP695-5M
TP710-5M
TP740-5M
TP745-5M
TP765-5M
TP790-5M
TP800-5M
TP830-5M
TP835-5M
TP850-5M
TP870-5M
TP890-5M
TP925-5M
TP950-5M
TP975-5M
TP985-5M
TP1000-5M
TP1050-5M
TP1115-5M
TP1125-5M
TP1195-5M
TP1250-5M
TP1270-5M
139
142
148
149
153
158
160
166
167
170
174
178
185
190
195
197
200
210
223
225
239
250
254
29.36
27.95
29.13
29.33
30.12
31.10
31.50
32.68
32.87
33.46
34.25
35.04
36.42
37.40
38.39
38.78
39.37
41.34
43.90
44.29
47.05
49.21
50.00
695
710
740
745
765
790
800
830
835
850
870
890
925
950
975
985
1000
1050
1115
1125
1195
1250
1270
TP1295-5M
TP1375-5M
TP1420-5M
TP1575-5M
TP1595-5M
TP1635-5M
TP1690-5M
TP1720-5M
TP1790-5M
TP1800-5M
TP1895-5M
TP1945-5M
TP1980-5M
TP2000-5M
TP2110-5M
TP2250-5M
TP2525-5M
TP2760-5M
TP3120-5M
TP3170-5M
TP3430-5M
TP3800-5M
259
275
284
315
319
327
338
344
358
360
379
389
396
400
422
450
505
552
624
634
686
760
50.98
64.13
55.91
62.01
62.80
64.37
66.54
67.72
70.47
70.87
74.61
76.57
77.95
78.74
83.07
88.58
99.41
108.66
122.83
124.80
135.04
149.61
1295
1629
1420
1575
1595
1635
1690
1720
1790
1800
1895
1945
1980
2000
2110
2250
2525
2760
3120
3170
3430
3800
5mm Pitch
Powering Progress.
gates.com/pt
55
TWIN POWER BELTS
®
June 2012
PowerGrip® Twin Power® Timing Belts
Twin Power belts have teeth on both sides to provide
PowerGrip Twin Power Timing belts are suitable for all industrial
serpentine applications requiring rotation reversal in some driven
shafts.
Features/Advantages
TWIN POWER BELTS
n Gates Twin Power belts have nylon facing on both tooth
surfaces providing equal load carrying capabilities on either side
of belt.
n Belt capacity is equal to standard single-sided PowerGrip Timing
belts.
and moisture.
n Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor.
Recommended Pulleys—PowerGrip Timing Pulleys
Notes
Gates PowerGrip Twin Power Timing belt part numbers are comprised of pitch length, pitch and width. TP denotes Twin Power.
Length — The length is shown in the first part of the belt designation. The first number is the pitch length in tenths of an inch. A TP300L075 has
a 30.0” pitch length.
Pitch — The pitch of a PowerGrip Twin Power Timing belt is the distance from center to center of the teeth (in inches). It is shown in the second
part of the belt designation by a letter or letters. Part number TP300L075 has a .375” pitch. The letters correspond to pitches as follows:
XL = Extra Light = 0.200” pitch;
L = Light = 0.375” pitch;
H = Heavy = 0.500” pitch.
Width — The width is shown in the last part of the belt designation. Part number TP300L075 is .75” wide.
1/5" Pitch (.200"/XL) — 1/4" Wide
Part
No.
Product
No.
TP126XL025
TP128XL025
TP130XL025
2
TP132XL025
2
TP134XL025
2
TP136XL025
2
TP138XL025
TP140XL025
2
TP142XL025
2
TP144XL025
TP146XL025
2
TP148XL025
TP150XL025
2
TP152XL025
TP156XL025
2
TP158XL025
TP160XL025
2
TP162XL025
2
TP166XL025
2
TP168XL025
TP170XL025
2
TP172XL025
2
TP174XL025
TP176XL025
2
TP178XL025
TP180XL025
9246-1169
9246-1170
9246-1107
9246-1171
9246-1172
9246-1173
9246-1174
9246-1108
9246-1175
9246-1176
9246-1177
9246-1178
9246-1109
9246-1179
9246-1181
9246-1182
9246-1110
9246-1183
9246-1185
9246-1186
9246-1111
9246-1187
9246-1188
9246-1189
9246-1190
9246-1112
2
2
56
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
63
64
65
66
67
68
69
70
71
72
73
74
75
76
78
79
80
81
83
84
85
86
87
88
89
90
12.60
12.80
13.00
13.20
13.40
13.60
13.80
14.00
14.20
14.40
14.60
14.80
15.00
15.20
15.60
15.80
16.00
16.20
16.60
16.80
17.00
17.20
17.40
17.60
17.80
18.00
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.02
.02
.02
.02
.03
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP182XL025
TP184XL025
2
TP186XL025
TP188XL025
TP190XL025
2
TP192XL025
TP200XL025
TP202XL025
2
TP204XL025
2
TP206XL025
TP210XL025
TP212XL025
TP214XL025
TP218XL025
TP220XL025
2
TP222XL025
2
TP226XL025
2
TP228XL025
TP230XL025
2
TP232XL025
TP234XL025
2
TP236XL025
TP240XL025
2
TP244XL025
TP246XL025
TP250XL025
9246-1191
9246-1192
9246-1193
9246-1194
9246-1113
9246-1195
9246-1114
9246-1197
9246-1198
9246-1199
9246-1115
9246-8100
9246-8101
9246-8102
9246-1116
9246-8103
9246-8104
9246-8105
9246-1117
9246-8106
9246-8107
9246-8108
9246-1118
9246-8109
9246-8110
9246-1119
91
92
93
94
95
96
100
101
102
103
105
106
107
109
110
111
113
114
115
116
117
118
120
122
123
125
18.20
18.40
18.60
18.80
19.00
19.20
20.00
20.20
20.40
20.60
21.00
21.20
21.40
21.80
22.00
22.20
22.60
22.80
23.00
23.20
23.40
23.60
24.00
24.40
24.60
25.00
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
2
gates.com/pt
Gates Corporation
®
June 2012
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP254XL025
TP258XL025
TP260XL025
2
TP262XL025
2
TP264XL025
2
TP266XL025
2
TP268XL025
2
TP274XL025
TP280XL025
2
TP286XL025
TP290XL025
2
TP296XL025
TP300XL025
2
TP306XL025
TP310XL025
TP316XL025
TP320XL025
2
TP322XL025
TP330XL025
2
TP338XL025
2
TP340XL025
TP344XL025
2
TP348XL025
2
TP350XL025
TP352XL025
TP362XL025
TP370XL025
TP380XL025
9246-8111
9246-8112
9246-1120
9246-8113
9246-8114
9246-8115
9246-8116
9246-8117
9246-1122
9246-8118
9246-1123
9246-8119
9246-1124
9246-8120
9246-1125
9246-8121
9246-8122
9246-8123
9246-1126
9246-8124
9246-1128
9246-8125
9246-8126
9246-1127
9246-8146
9246-8127
9246-1129
9246-1130
127
129
130
131
132
133
134
137
140
143
145
148
150
153
155
158
160
161
165
169
170
172
174
175
176
181
185
190
25.40
25.80
26.00
26.20
26.40
26.60
26.80
27.40
28.00
28.60
29.00
29.60
30.00
30.60
31.00
31.60
32.00
32.20
33.00
33.80
34.00
34.40
34.80
35.00
35.20
36.20
37.00
38.00
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
.05
.05
.05
.05
TP384XL025
TP390XL025
2
TP400XL025
2
TP412XL025
2
TP420XL025
2
TP424XL025
2
TP432XL025
2
TP438XL025
2
TP444XL025
TP450XL025
TP454XL025
TP460XL025
2
TP468XL025
2
TP480XL025
TP492XL025
TP498XL025
2
TP500XL025
2
TP506XL025
2
TP524XL025
2
TP570XL025
2
TP580XL025
2
TP592XL025
2
TP612XL025
2
TP630XL025
2
TP672XL025
TP690XL025
2
TP770XL025
2
TP850XL025
9246-8128
9246-1131
9246-1132
9246-8129
9246-1133
9246-8130
9246-8131
9246-8132
9246-8133
9246-1134
9246-8134
9246-1135
9246-8135
9246-1136
9246-8136
9246-8137
9246-1137
9246-8138
9246-8139
9246-1138
9246-8140
9246-8141
9246-8142
9246-1139
9246-8143
9246-8147
9246-1140
9246-8145
192
195
200
206
210
212
216
219
222
225
227
230
234
240
246
249
250
253
262
285
290
296
306
315
336
345
385
425
38.40
39.00
40.00
41.20
42.00
42.40
43.20
43.80
44.40
45.00
45.40
46.00
46.80
48.00
49.20
49.80
50.00
50.60
52.40
57.00
58.00
59.20
61.20
63.00
67.20
69.00
77.00
85.00
.05
.05
.06
.06
.06
.06
.06
.06
.06
.06
.07
.07
.07
.08
.08
.08
.08
.08
.08
.08
.09
.09
.09
.09
.10
.10
.12
.14
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
63
64
65
66
67
68
69
70
71
72
73
74
75
76
78
79
80
81
83
84
85
86
87
88
89
90
91
92
12.60
12.80
13.00
13.20
13.40
13.60
13.80
14.00
14.20
14.40
14.60
14.80
15.00
15.20
15.60
15.80
16.00
16.20
16.60
16.80
17.00
17.20
17.40
17.60
17.80
18.00
18.20
18.40
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.03
.03
.03
TP186XL037
TP188XL037
TP190XL037
2
TP192XL037
TP200XL037
TP202XL037
2
TP204XL037
2
TP206XL037
TP210XL037
TP212XL037
TP214XL037
2
TP218XL037
TP220XL037
2
TP222XL037
2
TP226XL037
2
TP228XL037
TP230XL037
2
TP232XL037
TP234XL037
2
TP236XL037
TP240XL037
2
TP244XL037
2
TP246XL037
TP250XL037
2
TP254XL037
2
TP258XL037
TP260XL037
2
TP262XL037
9246-1393
9246-1394
9246-1313
9246-1395
9246-1314
9246-1397
9246-1398
9246-1399
9246-1315
9246-8300
9246-8301
9246-8302
9246-1316
9246-8303
9246-8304
9246-8305
9246-1317
9246-8306
9246-8307
9246-8308
9246-1318
9246-8309
9246-8310
9246-1319
9246-8311
9246-8312
9246-1320
9246-8313
93
94
95
96
100
101
102
103
105
106
107
109
110
111
113
114
115
116
117
118
120
122
123
125
127
129
130
131
18.60
18.80
19.00
19.20
20.00
20.20
20.40
20.60
21.00
21.20
21.40
21.80
22.00
22.20
22.60
22.80
23.00
23.20
23.40
23.60
24.00
24.40
24.60
25.00
25.40
25.80
26.00
26.20
.03
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
2
2
TWIN POWER BELTS
Part
No.
1/5" Pitch (.200"/XL) — 3/8" Wide
Part
No.
Product
No.
TP126XL037
TP128XL037
TP130XL037
2
TP132XL037
2
TP134XL037
2
TP136XL037
2
TP138XL037
TP140XL037
2
TP142XL037
2
TP144XL037
TP146XL037
2
TP148XL037
TP150XL037
2
TP152XL037
TP156XL037
2
TP158XL037
TP160XL037
2
TP162XL037
2
TP166XL037
2
TP168XL037
TP170XL037
2
TP172XL037
2
TP174XL037
TP176XL037
2
TP178XL037
TP180XL037
TP182XL037
2
TP184XL037
9246-1369
9246-1370
9246-1307
9246-1371
9246-1372
9246-1373
9246-1374
9246-1308
9246-1375
9246-1376
9246-1377
9246-1378
9246-1309
9246-1379
9246-1381
9246-1382
9246-1310
9246-1383
9246-1385
9246-1386
9246-1311
9246-1387
9246-1388
9246-1389
9246-1390
9246-1312
9246-1391
9246-1392
2
2
2
®
Powering Progress.
gates.com/pt
57
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP264XL037
TP266XL037
2
TP268XL037
2
TP274XL037
TP280XL037
2
TP286XL037
TP290XL037
2
TP296XL037
TP300XL037
2
TP306XL037
TP310XL037
TP316XL037
TP320XL037
2
TP322XL037
TP330XL037
2
TP338XL037
TP340XL037
TP344XL037
2
TP348XL037
TP350XL037
TP352XL037
TP362XL037
TP370XL037
TP380XL037
TP384XL037
TP390XL037
9246-8314
9246-8315
9246-8316
9246-8317
9246-1322
9246-8318
9246-1323
9246-8319
9246-1324
9246-8320
9246-1325
9246-8321
9246-8322
9246-8323
9246-1326
9246-8324
9246-1328
9246-8325
9246-8326
9246-1327
9246-8346
9246-8327
9246-1329
9246-1330
9246-8328
9246-1331
132
133
134
137
140
143
145
148
150
153
155
158
160
161
165
169
170
172
174
175
176
181
185
190
192
195
26.40
26.60
26.80
27.40
28.00
28.60
29.00
29.60
30.00
30.60
31.00
31.60
32.00
32.20
33.00
33.80
34.00
34.40
34.80
35.00
35.20
36.20
37.00
38.00
38.40
39.00
.05
.05
.05
.05
.05
.05
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.07
.07
.07
.07
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
40
41
42
44
46
47
50
52
53
56
58
60
64
66
68
70
72
76
80
15.00
15.38
15.75
16.50
17.25
17.63
18.75
19.50
19.88
21.00
21.75
22.50
24.00
24.75
25.50
26.25
27.00
28.50
30.00
.05
.05
.05
.05
.06
.06
.06
.06
.06
.07
.07
.07
.07
.08
.08
.08
.08
.09
.09
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
40
41
42
44
46
47
15.00
15.38
15.75
16.50
17.25
17.63
.08
.08
.08
.08
.09
.09
2
TWIN POWER BELTS
2
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP400XL037
TP412XL037
TP420XL037
2
TP424XL037
2
TP432XL037
2
TP438XL037
2
TP444XL037
TP450XL037
TP454XL037
TP460XL037
2
TP468XL037
2
TP480XL037
TP492XL037
TP498XL037
2
TP500XL037
2
TP506XL037
2
TP524XL037
2
TP570XL037
2
TP580XL037
2
TP592XL037
2
TP612XL037
2
TP630XL037
2
TP672XL037
TP690XL037
2
TP770XL037
2
TP850XL037
9246-1332
9246-8329
9246-1333
9246-8330
9246-8331
9246-8332
9246-8333
9246-1334
9246-8334
9246-1335
9246-8335
9246-1336
9246-8336
9246-8337
9246-1337
9246-8338
9246-8339
9246-1338
9246-8340
9246-8341
9246-8342
9246-1339
9246-8343
9246-8347
9246-1340
9246-8345
200
206
210
212
216
219
222
225
227
230
234
240
246
249
250
253
262
285
290
296
306
315
336
345
385
425
40.00
41.20
42.00
42.40
43.20
43.80
44.40
45.00
45.40
46.00
46.80
48.00
49.20
49.80
50.00
50.60
52.40
57.00
58.00
59.20
61.20
63.00
67.20
69.00
77.00
85.00
.07
.08
.08
.08
.08
.08
.09
.09
.09
.09
.09
.09
.10
.10
.10
.10
.11
.11
.12
.12
.12
.13
.13
.14
.15
.17
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP315L050
TP322L050
TP345L050
TP367L050
2
TP375L050
TP390L050
TP420L050
2
TP446L050
TP450L050
TP480L050
TP510L050
TP540L050
2
TP566L050
TP600L050
TP660L050
TP817L050
2
TP900L050
2
TP945L050
9246-2123
9246-2110
9246-2111
9246-2112
9246-7139
9246-2113
9246-2114
9246-7140
9246-2115
9246-2116
9246-2117
9246-2118
9246-7141
9246-2119
9246-2120
9246-2125
9246-2126
9246-7148
84
86
92
98
100
104
112
119
120
128
136
144
151
160
176
218
240
252
31.50
32.25
34.50
36.75
37.50
39.00
42.00
44.63
45.00
48.00
51.00
54.00
56.63
60.00
66.00
81.75
90.00
94.50
.10
.10
.10
.11
.11
.12
.13
.13
.14
.14
.15
.16
.17
.18
.20
.24
.26
.27
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP187L075
TP195L075
2
TP199L075
TP210L075
2
TP218L075
TP225L075
9246-2202
9246-2222
9246-7234
9246-2203
9246-7236
9246-2204
50
52
53
56
58
60
18.75
19.50
19.88
21.00
21.75
22.50
.09
.10
.10
.10
.11
.11
2
2
3/8" Pitch (.375"/L) — 1/2" Wide
Part
No.
Product
No.
TP150L050
TP154L050
2
TP158L050
2
TP165L050
TP173L050
2
TP176L050
TP187L050
2
TP195L050
2
TP199L050
TP210L050
TP218L050
TP225L050
TP240L050
2
TP248L050
TP255L050
2
TP263L050
TP270L050
TP285L050
TP300L050
9246-2101
9246-2127
9246-2128
9246-2121
9246-2129
9246-7133
9246-2102
9246-2122
9246-7134
9246-2103
9246-7136
9246-2104
9246-2105
9246-7137
9246-2106
9246-7138
9246-2107
9246-2108
9246-2109
2
2
3/8" Pitch (.375"/L) — 3/4" Wide
Part
No.
Product
No.
TP150L075
TP154L075
2
TP158L075
2
TP165L075
TP173L075
2
TP176L075
9246-2201
9246-2227
9246-2228
9246-2221
9246-2229
9246-7223
2
2
58
2
gates.com/pt
Gates Corporation
®
June 2012
3/8" Pitch (.375"/L) — 3/4" Wide (continued)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP240L075
TP248L075
TP255L075
2
TP263L075
TP270L075
TP285L075
TP300L075
2
TP315L075
TP322L075
TP345L075
TP367L075
2
TP375L075
TP390L075
9246-2205
9246-7237
9246-2206
9246-7238
9246-2207
9246-2208
9246-2209
9246-2223
9246-2210
9246-2211
9246-2212
9246-7239
9246-2213
64
66
68
70
72
76
80
84
86
92
98
100
104
24.00
24.75
25.50
26.25
27.00
28.50
30.00
31.50
32.25
34.50
36.75
37.50
39.00
.12
.12
.12
.13
.13
.14
.14
.15
.15
.17
.18
.18
.19
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
40
41
42
44
46
47
50
52
53
56
58
60
64
66
68
70
72
76
80
15.00
15.38
15.75
16.50
17.25
17.63
18.75
19.50
19.88
21.00
21.75
22.50
24.00
24.75
25.50
26.25
27.00
28.50
30.00
.02
.02
.03
.04
.05
.07
.08
.10
.10
.12
.13
.15
.16
.17
.18
.20
.20
.22
.23
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
42
44
45
46
48
54
60
62
63
64
66
68
70
72
74
78
80
82
83
21.00
22.00
22.50
23.00
24.00
27.00
30.00
31.00
31.50
32.00
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
.15
.16
.16
.16
.17
.17
.18
.18
.18
.18
.19
.19
.20
.20
.21
.22
.22
.22
.22
2
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP420L075
TP446L075
TP450L075
TP480L075
TP510L075
TP540L075
2
TP566L075
TP600L075
TP660L075
TP817L075
2
TP900L075
2
TP945L075
9246-2214
9246-7240
9246-2215
9246-2216
9246-2217
9246-2218
9246-7241
9246-2219
9246-2220
9246-2225
9246-2226
9246-7248
112
119
120
128
136
144
151
160
176
218
240
252
42.00
44.63
45.00
48.00
51.00
54.00
56.63
60.00
66.00
81.75
90.00
94.50
.20
.21
.21
.23
.24
.25
.27
.28
.31
.38
.42
.44
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP315L100
TP322L100
TP345L100
TP367L100
2
TP375L100
TP390L100
TP420L100
2
TP446L100
TP450L100
TP480L100
TP510L100
TP540L100
2
TP566L100
TP600L100
TP660L100
TP817L100
TP900L100
2
TP945L100
9246-2323
9246-2310
9246-2311
9246-2312
9246-7339
9246-2313
9246-2314
9246-7340
9246-2315
9246-2316
9246-2317
9246-2318
9246-7341
9246-2319
9246-2320
9246-2325
9246-2326
9246-7348
84
86
92
98
100
104
112
119
120
128
136
144
151
160
176
218
240
252
31.50
32.25
34.50
36.75
37.50
39.00
42.00
44.63
45.00
48.00
51.00
54.00
56.63
60.00
66.00
81.75
90.00
94.50
.24
.25
.26
.27
.28
.29
.30
.31
.32
.33
.34
.35
.36
.39
.41
.44
.45
.47
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP420H075
TP445H075
TP450H075
2
TP455H075
2
TP465H075
TP480H075
2
TP490H075
2
TP495H075
TP510H075
TP525H075
TP540H075
2
TP555H075
TP560H075
TP570H075
2
TP585H075
TP600H075
2
TP605H075
TP630H075
2
TP645H075
9246-3106
9246-3149
9246-3107
9246-8150
9246-8151
9246-3108
9246-3134
9246-8152
9246-3109
9246-8153
9246-3110
9246-8154
9246-3135
9246-3111
9246-3136
9246-3112
9246-8155
9246-3113
9246-3137
84
89
90
91
93
96
98
99
102
105
108
111
112
114
117
120
121
126
129
42.00
44.50
45.00
45.50
46.50
48.00
49.00
49.50
51.00
52.50
54.00
55.50
56.00
57.00
58.50
60.00
60.50
63.00
64.50
.22
.23
.23
.24
.25
.25
.25
.26
.25
.26
.27
.28
.28
.28
.28
.29
.29
.30
.31
2
3/8" Pitch (.375"/L) — 1" Wide
Product
No.
TP150L100
TP154L100
2
TP158L100
2
TP165L100
TP173L100
2
TP176L100
TP187L100
2
TP195L100
2
TP199L100
TP210L100
2
TP218L100
TP225L100
TP240L100
2
TP248L100
TP255L100
2
TP263L100
TP270L100
TP285L100
TP300L100
9246-2301
9246-2327
9246-2328
9246-2321
9246-2329
9246-7333
9246-2302
9246-2322
9246-7334
9246-2303
9246-7336
9246-2304
9246-2305
9246-7337
9246-2306
9246-7338
9246-2307
9246-2308
9246-2309
2
2
TWIN POWER BELTS
Part
No.
1/2" Pitch (.500"/H) — 3/4" Wide
Part
No.
Product
No.
TP210H075
TP220H075
2
TP225H075
2
TP230H075
TP240H075
TP270H075
TP300H075
2
TP310H075
2
TP315H075
2
TP320H075
TP330H075
2
TP340H075
2
TP350H075
TP360H075
2
TP370H075
TP390H075
2
TP400H075
2
TP410H075
2
TP415H075
9246-3125
9246-3126
9246-3145
9246-3127
9246-3100
9246-3101
9246-3102
9246-3103
9246-3147
9246-3128
9246-3124
9246-3129
9246-3130
9246-3104
9246-3131
9246-3105
9246-3132
9246-3133
9246-3148
2
2
2
2
®
Powering Progress.
gates.com/pt
59
June 2012
1/2" Pitch (.500"/H) — 3/4" Wide (continued)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP655H075
TP660H075
TP700H075
2
TP730H075
TP750H075
2
TP775H075
2
TP780H075
TP800H075
2
TP820H075
2
TP840H075
TP850H075
TP900H075
2
TP960H075
TP1000H075
9246-8156
9246-3114
9246-3115
9246-3138
9246-3116
9246-8158
9246-3139
9246-3117
9246-3140
9246-3141
9246-3118
9246-3119
9246-3142
9246-3120
131
132
140
146
150
155
156
160
164
168
170
180
192
200
65.50
66.00
70.00
73.00
75.00
77.50
78.00
80.00
82.00
84.00
85.00
90.00
96.00
100.00
.31
.31
.33
.34
.35
.35
.36
.35
.37
.38
.38
.40
.42
.44
TP1100H075
TP1140H075
2
TP1180H075
TP1250H075
TP1400H075
2
TP1510H075
2
TP1550H075
TP1645H075
2
TP1680H075
TP1700H075
2
TP2090H075
2
TP2100H075
2
TP2120H075
2
TP2330H075
9246-3121
9246-3143
9246-8161
9246-3122
9246-3123
9246-8165
9246-3144
9246-8166
9246-8167
9246-3146
9246-8168
9246-8169
9246-8170
9246-8171
220
228
236
250
280
302
310
329
336
340
418
420
424
466
110.00
114.00
118.00
125.00
140.00
151.00
155.00
164.50
168.00
170.00
209.00
210.00
212.00
233.00
.48
.49
.50
.54
.58
.63
.64
.68
.69
.70
.83
.84
.85
.92
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP600H100
TP605H100
TP630H100
TP645H100
2
TP655H100
TP660H100
TP700H100
TP730H100
TP750H100
2
TP775H100
TP780H100
TP800H100
TP820H100
2
TP840H100
TP850H100
TP900H100
2
TP960H100
TP1000H100
TP1100H100
TP1140H100
TP1180H100
TP1250H100
TP1400H100
2
TP1510H100
2
TP1550H100
TP1645H100
2
TP1680H100
TP1700H100
2
TP2090H100
2
TP2100H100
2
TP2120H100
2
TP2330H100
9246-3212
9246-8255
9246-3213
9246-3237
9246-8256
9246-3214
9246-3215
9246-3238
9246-3216
9246-8258
9246-3239
9246-3217
9246-3240
9246-3241
9246-3218
9246-3219
9246-3242
9246-3220
9246-3221
9246-3243
9246-8261
9246-3222
9246-3223
9246-8265
9246-3244
9246-8266
9246-8267
9246-3246
9246-8268
9246-8269
9246-8270
9246-8271
120
121
126
129
131
132
140
146
150
155
156
160
164
168
170
180
192
200
220
228
236
250
280
302
310
329
336
340
418
420
424
466
60.00
60.50
63.00
64.50
65.50
66.00
70.00
73.00
75.00
77.50
78.00
80.00
82.00
84.00
85.00
90.00
96.00
100.00
110.00
114.00
118.00
125.00
140.00
151.00
155.00
164.50
168.00
170.00
209.00
210.00
212.00
233.00
.41
.42
.45
.45
.46
.46
.47
.50
.52
.53
.54
.55
.56
.58
.58
.62
.66
.68
.75
.77
.80
.85
.95
1.03
1.05
1.12
1.15
1.16
1.40
1.42
1.45
1.60
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
48
54
60
62
24.00
27.00
30.00
31.00
.38
.40
.42
.43
2
1/2" Pitch (.500"/H) — 1" Wide
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP210H100
TP220H100
2
TP225H100
2
TP230H100
TP240H100
TP270H100
TP300H100
2
TP315H100
2
TP320H100
TP330H100
2
TP340H100
2
TP350H100
TP360H100
2
TP370H100
TP390H100
TP400H100
2
TP410H100
2
TP415H100
TP420H100
TP445H100
TP450H100
2
TP455H100
2
TP465H100
TP480H100
TP490H100
2
TP495H100
TP510H100
2
TP525H100
TP540H100
TP555H100
TP560H100
TP570H100
2
TP585H100
9246-3225
9246-3226
9246-3245
9246-3227
9246-3200
9246-3201
9246-3202
9246-3247
9246-3228
9246-3224
9246-3229
9246-3230
9246-3204
9246-3231
9246-3205
9246-3232
9246-3233
9246-3248
9246-3206
9246-3249
9246-3207
9246-8250
9246-8251
9246-3208
9246-3234
9246-8252
9246-3209
9246-8253
9246-3210
9246-8254
9246-3235
9246-3211
9246-3236
42
44
45
46
48
54
60
63
64
66
68
70
72
74
78
80
82
83
84
89
90
91
93
96
98
99
102
105
108
111
112
114
117
21.00
22.00
22.50
23.00
24.00
27.00
30.00
31.50
32.00
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
42.00
44.50
45.00
45.50
46.50
48.00
49.00
49.50
51.00
52.50
54.00
55.50
56.00
57.00
58.50
.15
.16
.16
.17
.17
.18
.20
.23
.22
.23
.24
.25
.25
.26
.27
.28
.28
.29
.30
.32
.32
.32
.32
.33
.34
.34
.36
.36
.37
.38
.38
.39
.41
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
42
44
45
46
21.00
22.00
22.50
23.00
.33
.35
.36
.37
TP240H150
TP270H150
TP300H150
2
TP310H150
9246-3300
9246-3301
9246-3302
9246-3303
2
TWIN POWER BELTS
2
2
1/2" Pitch (.500"/H) — 1 1/2" Wide
Part
No.
Product
No.
TP210H150
TP220H150
TP225H150
2
TP230H150
9246-3325
9246-3326
9246-3345
9246-3327
2
2
2
2
60
gates.com/pt
Gates Corporation
®
June 2012
1/2" Pitch (.500"/H) — 1 1/2" Wide (continued)
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP315H150
TP320H150
TP330H150
2
TP340H150
2
TP350H150
TP360H150
2
TP370H150
TP390H150
2
TP400H150
2
TP410H150
2
TP415H150
TP420H150
2
TP445H150
TP450H150
2
TP455H150
2
TP465H150
TP480H150
2
TP490H150
2
TP495H150
TP510H150
2
TP525H150
TP540H150
2
TP555H150
TP560H150
TP570H150
2
TP585H150
TP600H150
2
TP605H150
TP630H150
9246-3347
9246-3328
9246-3324
9246-3329
9246-3330
9246-3304
9246-3331
9246-3305
9246-3332
9246-3333
9246-3348
9246-3306
9246-3349
9246-3307
9246-8350
9246-8351
9246-3308
9246-3334
9246-8352
9246-3309
9246-8353
9246-3310
9246-8354
9246-3335
9246-3311
9246-3336
9246-3312
9246-8355
9246-3313
63
64
66
68
70
72
74
78
80
82
83
84
89
90
91
93
96
98
99
102
105
108
111
112
114
117
120
121
126
31.50
32.00
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
42.00
44.50
45.00
45.50
46.50
48.00
49.00
49.50
51.00
52.50
54.00
55.50
56.00
57.00
58.50
60.00
60.50
63.00
.43
.44
.45
.46
.46
.47
.47
.50
.51
.53
.53
.54
.55
.56
.56
.56
.58
.61
.60
.62
.63
.65
.66
.66
.68
.68
.74
.71
.73
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
42
44
45
46
48
54
60
62
63
64
66
68
70
72
74
78
80
82
83
84
89
90
91
93
96
98
99
21.00
22.00
22.50
23.00
24.00
27.00
30.00
31.00
31.50
32.00
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
42.00
44.50
45.00
45.50
46.50
48.00
49.00
49.50
.43
.45
.46
.47
.49
.57
.61
.63
.64
.66
.68
.69
.70
.72
.75
.79
.80
.83
.84
.85
.90
.91
.92
.94
.98
.99
1.00
2
2
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP645H150
TP655H150
TP660H150
TP700H150
2
TP730H150
TP750H150
2
TP775H150
2
TP780H150
TP800H150
2
TP820H150
2
TP840H150
TP850H150
TP900H150
2
TP960H150
TP1000H150
TP1100H150
TP1140H150
2
TP1180H150
TP1250H150
TP1400H150
2
TP1510H150
2
TP1550H150
TP1645H150
2
TP1680H150
TP1700H150
2
TP2090H150
2
TP2100H150
2
TP2120H150
TP2330H150
9246-3337
9246-8356
9246-3314
9246-3315
9246-3338
9246-3316
9246-8358
9246-3339
9246-3317
9246-3340
9246-3341
9246-3318
9246-3319
9246-3342
9246-3320
9246-3321
9246-3343
9246-8361
9246-3322
9246-3323
9246-8365
9246-3344
9246-8366
9246-8367
9246-3346
9246-8368
9246-8369
9246-8370
9246-8371
129
131
132
140
146
150
155
156
160
164
168
170
180
192
200
220
228
236
250
280
302
310
329
336
340
418
420
424
466
64.50
65.50
66.00
70.00
73.00
75.00
77.50
78.00
80.00
82.00
84.00
85.00
90.00
96.00
100.00
110.00
114.00
118.00
125.00
140.00
151.00
155.00
164.50
168.00
170.00
209.00
210.00
212.00
233.00
.74
.74
.76
.80
.83
.84
.86
.86
.89
.90
.95
.95
.97
1.04
1.08
1.14
1.20
1.25
1.30
1.45
1.53
1.58
1.68
1.70
1.72
1.55
2.10
2.12
2.30
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP510H200
TP525H200
TP540H200
2
TP555H200
TP560H200
TP570H200
2
TP585H200
TP600H200
2
TP605H200
TP630H200
2
TP645H200
2
TP655H200
TP660H200
TP700H200
TP730H200
TP750H200
2
TP775H200
2
TP780H200
TP800H200
2
TP820H200
2
TP840H200
TP850H200
TP900H200
2
TP960H200
TP1000H200
TP1100H200
TP1140H200
9246-3409
9246-8453
9246-3410
9246-8454
9246-3435
9246-3411
9246-3436
9246-3412
9246-8455
9246-3413
9246-3437
9246-8456
9246-3414
9246-3415
9246-3438
9246-3416
9246-8458
9246-3439
9246-3417
9246-3440
9246-3441
9246-3418
9246-3419
9246-3442
9246-3420
9246-3421
9246-3443
102
105
108
111
112
114
117
120
121
126
129
131
132
140
146
150
155
156
160
164
168
170
180
192
200
220
228
51.00
52.50
54.00
55.50
56.00
57.00
58.50
60.00
60.50
63.00
64.50
65.50
66.00
70.00
73.00
75.00
77.50
78.00
80.00
82.00
84.00
85.00
90.00
96.00
100.00
110.00
114.00
1.00
1.06
1.09
1.12
1.13
1.16
1.18
1.21
1.22
1.27
1.29
1.32
1.33
1.40
1.47
1.52
1.56
1.57
1.62
1.65
1.69
1.72
1.82
1.94
2.00
2.20
2.30
2
2
TWIN POWER BELTS
Part
No.
1/2" Pitch (.500"/H) — 2" Wide
Part
No.
Product
No.
TP210H200
TP220H200
2
TP225H200
2
TP230H200
TP240H200
TP270H200
TP300H200
2
TP310H200
2
TP315H200
2
TP320H200
TP330H200
2
TP340H200
2
TP350H200
TP360H200
2
TP370H200
TP390H200
2
TP400H200
2
TP410H200
2
TP415H200
TP420H200
2
TP445H200
TP450H200
2
TP455H200
2
TP465H200
TP480H200
2
TP490H200
2
TP495H200
9246-3425
9246-3426
9246-3445
9246-3427
9246-3400
9246-3401
9246-3402
9246-3403
9246-3447
9246-3428
9246-3424
9246-3429
9246-3430
9246-3404
9246-3431
9246-3405
9246-3432
9246-3433
9246-3448
9246-3406
9246-3449
9246-3407
9246-8450
9246-8451
9246-3408
9246-3434
9246-8452
2
2
2
2
®
Powering Progress.
gates.com/pt
61
June 2012
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP1180H200
TP1250H200
TP1400H200
2
TP1510H200
TP1550H200
TP1645H200
9246-8461
9246-3422
9246-3423
9246-8465
9246-3444
9246-8466
236
250
280
302
310
329
118.00
125.00
140.00
151.00
155.00
164.50
2.38
2.52
2.82
3.04
3.12
3.31
2
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP1680H200
TP1700H200
2
TP2090H200
2
TP2100H200
2
TP2120H200
2
TP2330H200
9246-8467
9246-3446
9246-8468
9246-8469
9246-8470
9246-8471
336
340
418
420
424
466
168.00
170.00
209.00
210.00
212.00
233.00
3.38
3.42
4.20
4.22
4.26
4.68
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP585H300
TP600H300
2
TP605H300
TP630H300
2
TP645H300
2
TP655H300
TP660H300
TP700H300
TP730H300
TP750H300
2
TP775H300
2
TP780H300
TP800H300
2
TP820H300
TP840H300
TP850H300
TP900H300
TP960H300
TP1000H300
TP1100H300
TP1140H300
2
TP1180H300
TP1250H300
TP1400H300
2
TP1510H300
2
TP1550H300
TP1645H300
2
TP1680H300
TP1700H300
TP2090H300
2
TP2100H300
2
TP2120H300
2
TP2330H300
9246-3536
9246-3512
9246-8555
9246-3513
9246-3537
9246-8556
9246-3514
9246-3515
9246-3538
9246-3516
9246-8558
9246-3539
9246-3517
9246-3540
9246-3541
9246-3518
9246-3519
9246-3542
9246-3520
9246-3521
9246-3543
9246-8561
9246-3522
9246-3523
9246-8565
9246-3544
9246-8566
9246-8567
9246-3546
9246-8568
9246-8569
9246-8570
9246-8571
117
120
121
126
129
131
132
140
146
150
155
156
160
164
168
170
180
192
200
220
228
236
250
280
302
310
329
336
340
418
420
424
466
58.50
60.00
60.50
63.00
64.50
65.50
66.00
70.00
73.00
75.00
77.50
78.00
80.00
82.00
84.00
85.00
90.00
96.00
100.00
110.00
114.00
118.00
125.00
140.00
151.00
155.00
164.50
168.00
170.00
209.00
210.00
212.00
233.00
1.77
1.80
1.84
1.91
1.95
1.97
2.00
2.13
2.23
2.30
2.36
2.38
2.43
2.49
2.54
2.59
2.73
2.94
3.06
3.34
3.45
3.63
3.80
4.26
4.59
4.71
5.00
5.11
5.16
6.34
6.37
6.46
7.07
2
1/2" Pitch (.500"/H) — 3" Wide
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
TP210H300
TP220H300
2
TP225H300
2
TP230H300
TP240H300
TP270H300
TP300H300
2
TP310H300
2
TP315H300
2
TP320H300
TP330H300
2
TP340H300
2
TP350H300
TP360H300
2
TP370H300
TP390H300
2
TP400H300
2
TP410H300
2
TP415H300
TP420H300
2
TP445H300
TP450H300
2
TP455H300
2
TP465H300
TP480H300
2
TP490H300
2
TP495H300
TP510H300
2
TP525H300
TP540H300
2
TP555H300
TP560H300
TP570H300
9246-3525
9246-3526
9246-3545
9246-3527
9246-3500
9246-3501
9246-3502
9246-3503
9246-3547
9246-3528
9246-3524
9246-3529
9246-3530
9246-3504
9246-3531
9246-3505
9246-3532
9246-3533
9246-3548
9246-3506
9246-3549
9246-3507
9246-8550
9246-8551
9246-3508
9246-3534
9246-8552
9246-3509
9246-8553
9246-3510
9246-8554
9246-3535
9246-3511
42
44
45
46
48
54
60
62
63
64
66
68
70
72
74
78
80
82
83
84
89
90
91
93
96
98
99
102
105
108
111
112
114
21.00
22.00
22.50
23.00
24.00
27.00
30.00
31.00
31.50
32.00
33.00
34.00
35.00
36.00
37.00
39.00
40.00
41.00
41.50
42.00
44.50
45.00
45.50
46.50
48.00
49.00
49.50
51.00
52.50
54.00
55.50
56.00
57.00
.66
.69
.71
.73
.75
.82
.91
.94
.95
.96
.98
1.01
1.04
1.09
1.14
1.18
1.23
1.25
1.26
1.27
1.36
1.37
1.39
1.42
1.46
1.48
1.49
1.55
1.60
1.64
1.68
1.70
1.73
2
TWIN POWER BELTS
2
2
62
2
gates.com/pt
Gates Corporation
®
June 2012
Long-Length Poly Chain® GT® Carbon™ Belting
An innovative construction combined with the Gates tooth profile
makes Poly Chain® GT® Carbon™ Gates most powerful
synchronous belt. Compact and lightweight, Poly Chain® GT®
Carbon™ belt drives deliver more power in less space.
Long length Poly Chain® GT® Carbon™ belting is a cost effective,
low maintenance drive alternative that is well suited for linear
movement, positioning and conveying applications.
Features/Advantages
n Gates patented curvilinear tooth profile provides excellent
positioning characteristics, noise reduction, high shear
strength, and improved load carrying capacity.
n Robust carbon tensile cord combines minimal stretch with
n Durable polyurethane construction resists chemicals, oil, pollutants, and abrasion.
Poly Chain® GT®2 Sprockets
Notes
Minimum order length for Poly Chain® GT® Carbon™ belting is 50 feet, ordered in 50 foot increments thereafter. Continuous lengths, if needed,
must be specified when ordering, and must be ordered in increments of the minimum order quantity. Continuous lengths may require lead
times.
Poly Chain® GT® Carbon™ belting can be used on existing drives as replacement for Poly Chain® GT® belting.
Minimum order quantities may vary for non-standard widths. Check with Customer Service.
8mm Pitch
14mm Pitch
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
LL8MGT-012
LL8MGT-021
LL8MGT-036
9302-1000
9302-1100
9302-1200
12
21
36
.04
.07
.11
Min
Order
Qty
Max.
Cont.
Length
50 ft.
50 ft.
50 ft.
900 ft.
504 ft.
298 ft.
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
Min
Order
Qty
Max.
Cont.
Length
LL14MGT-020
LL14MGT-037
9302-1300
9302-1400
20
37
.11
.19
50 ft.
50 ft.
522 ft.
298 ft.
LONG-LENGTH BELTING
®
Powering Progress.
gates.com/pt
63
June 2012
Long-Length PowerGrip® GT®2 Belting
Long length PowerGrip GT2 belting is a cost effective, low
maintenance drive alternative.
Well suited for linear movement, positioning and conveying
applications.
Features/Advantages
life, and high resistance to elongation. Steel tensile cord is
available in some belt types for added length stability.
and moisture.
service life.
n The PowerGrip GT2 belt tooth is designed for use with a
specific sprocket groove profile. The sprocket groove-belt tooth combination increases capacity, while
improving registration.
n PowerGrip GT2 has more tooth ratchet resistance than HTD®.
n PowerGrip GT2 belt/sprocket combinations match or exceed the positional accuracy of PowerGrip Timing
Notes
Minimum order lengths for belting is 50 feet, ordered in 50 foot increments thereafter.
Minimum order lengths for some belting is 98 feet, ordered in 98 foot increments thereafter.
Continuous lengths, if needed, must be specified when ordering, and must be ordered in increments of the minimum order quantity (unless
ordering the maximum continuous lengths).
Minimum order quantities may vary for non-standard widths. Continuous lengths may require lead times. Check with Customer Service.
LONG-LENGTH BELTING
2mm Pitch
8mm Pitch
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
LL2MR04
LL2MR06
LL2MR09
9396-0033
9396-0009
9396-0052
4
6
9
.01
.01
.02
50 ft.
50 ft.
50 ft.
300 ft.
300 ft.
300 ft.
Min
Order
Qty
Max.
Cont.
Length
50 ft.
50 ft.
50 ft.
600 ft.
385 ft.
240 ft.
Min
Order
Qty
Max.
Cont.
Length
3mm Pitch
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
LL3MR06
LL3MR09
LL3MR15
9396-0002
9396-0012
9396-0021
6
9
15
.02
.02
.04
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
Min
Order
Qty
Max.
Cont.
Length
LL8MR20
LL8MR30
LL8MR50
LL8MR85
9396-0029
9396-0030
9396-0031
9396-0032
20
30
50
85
.08
.13
.21
.36
98 ft.
98 ft.
98 ft.
98 ft.
590 ft.
590 ft.
590 ft.
590 ft.
Steel Tensile — 5mm Pitch
5mm Pitch
64
Part
No.
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
Min
Order
Qty
Max.
Cont.
Length
LL5MR15 ST
LL5MR25 ST
9396-10043
9396-40417
15
25
.18
.23
98 ft.
98 ft.
392 ft.
392 ft.
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
Min
Order
Qty
Max.
Cont.
Length
LL5MR09
LL5MR15
9396-0020
9396-0025
9
15
.03
.04
50 ft.
50 ft.
360 ft.
230 ft.
gates.com/pt
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
Min
Order
Qty
Max.
Cont.
Length
LL8MR20 ST
LL8MR30 ST
LL8MR50 ST
9396-10049
9396-10050
9396-40433
20
30
50
.29
.37
.53
98 ft.
98 ft.
98 ft.
392 ft.
392 ft.
392 ft.
Gates Corporation
®
June 2012
Long-Length PowerGrip® HTD® Belting
PowerGrip HTD belts have a larger, more robust tooth profile for
increased capacity, as compared to timing belts.
Long length PowerGrip HTD belting is a cost effective, low
maintenance drive alternative that is well suited for linear
movement, positing and conveying applications.
Features/Advantages
and moisture.
service life.
n Eliminates lubrication and re-tensioning to reduce maintenance
and labor required on drives.
PowerGrip HTD Sprockets
Notes
Minimum order lengths for fiberglass tensile cord belting is 50 feet, ordered in 50 foot increments thereafter.
Minimum order lengths for steel tensile belting is 98 feet, ordered in 98 foot increments thereafter.
Continuous lengths may require lead times.
3mm Pitch
14mm Pitch
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
LL3M06
LL3M09
LL3M15
9308-0044
9308-0003
9308-0084
6
9
15
.01
.01
.01
50 ft.
50 ft.
50 ft.
300 ft.
300 ft.
185 ft.
Min
Order
Qty
Max.
Cont.
Length
Min
Order
Qty
Max.
Cont.
Length
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
LL14M40
LL14M55
LL14M85
9308-10009
9308-10020
9308-10057
40
55
85
.26
.35
.55
98 ft.
98 ft.
98 ft.
392 ft.
392 ft.
392 ft.
Min
Order
Qty
Max.
Cont.
Length
98 ft.
98 ft.
98 ft.
392 ft.
392 ft.
392 ft.
Min
Order
Qty
Max.
Cont.
Length
5mm Pitch
Product
No.
Width
(mm)
LL5M09
LL5M15
LL5M25
9308-0045
9308-0033
9308-0025
9
15
25
.01
.04
.05
50 ft.
50 ft.
50 ft.
300 ft.
185 ft.
100 ft.
Min
Order
Qty
Max.
Cont.
Length
50 ft.
50 ft.
50 ft.
50 ft.
170 ft.
300 ft.
300 ft.
300 ft.
8mm Pitch
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
LL8M20
LL8M30
17
LL8M50
17
LL8M85
9308-0001
9308-0004
9308-0005
9308-0006
20
30
50
85
.08
.13
.21
.36
17
17
17
Part
No.
Product
No.
Width
(mm)
Net
Wt.
per
Ft.
LL14M40 ST
LL14M55 ST
LL14M85 ST
9308-10016
9308-10051
9308-10084
40
55
85
.76
1.02
1.51
Longer continuous lengths may be available by special order, contact Customer Service.
®
Powering Progress.
gates.com/pt
65
LONG-LENGTH BELTING
Part
No.
Net
Wt.
per
Ft.
June 2012
Long-Length PowerGrip® Timing Belting
The trapezoidal tooth makes this belt well suited for use in
positioning applications.
Long length PowerGrip Timing belting is a cost effective, low
maintenance drive alternative that is well suited for linear
movement, positioning and conveying applications.
Features/Advantages
and moisture.
service life.
Notes
Minimum order lengths for fiberglass tensile cord belting is 50 feet, ordered in 50 foot increments thereafter.
Minimum order lengths for steel tensile belting is 98 feet, ordered in 98 foot increments thereafter.
Continuous lengths may require lead times.
MXL (.080" Pitch)
H (.500" Pitch)
Part
No.
Product
No.
Width
(In.)
Net
Wt.
per
Ft.
LL025MXL
LL037MXL
LL050MXL
9314-2020
9314-2014
9314-2038
1/4
3/8
1/2
.01
.01
.02
Min
Order
Qty
Max.
Cont.
Length
50 ft.
50 ft.
50 ft.
475 ft.
300 ft.
240 ft.
LONG-LENGTH BELTING
XL (.200" Pitch)
Part
No.
Product
No.
Width
(In.)
Net
Wt.
per
Ft.
Min
Order
Qty
Max.
Cont.
Length
LL025XL
LL037XL
LL050XL
9314-0001
9314-0002
9314-2012
1/4
3/8
1/2
.01
.02
.03
50 ft.
50 ft.
50 ft.
460 ft.
300 ft.
225 ft.
Min
Order
Qty
Max.
Cont.
Length
50 ft.
50 ft.
50 ft.
50 ft.
575 ft.
430 ft.
275 ft.
200 ft.
L (.375" Pitch)
17
66
Part
No.
Product
No.
Width
(In.)
Net
Wt.
per
Ft.
LL037L
LL050L
LL075L
LL100L
9314-2089
9314-0004
9314-0007
9314-0015
3/8
1/2
3/4
1
.03
.02
.04
.05
Part
No.
Product
No.
Width
(In.)
Net
Wt.
per
Ft.
Min
Order
Qty
Max.
Cont.
Length
LL050H
LL075H
17
LL100H
LL150H
LL200H
LL300H
9314-0003
9314-0006
9314-0008
9314-0017
9314-0021
9314-0025
1/2
3/4
1
1 1/2
2
3
.04
.06
.12
.12
.13
.27
50 ft.
50 ft.
50 ft.
98 ft.
98 ft.
98 ft.
400 ft.
275 ft.
200 ft.
656 ft.
656 ft.
656 ft.
Min
Order
Qty
Max.
Cont.
Length
98 ft.
98 ft.
492 ft.
492 ft.
17
17
Steel Tensile — H (.500 Pitch)
Part
No.
Product
No.
Width
(In.)
Net
Wt.
per
Ft.
LL075H ST
LL100H ST
9314-10011
9314-10037
3/4
1
.22
.25
Longer continuous lengths may be available by special order, contact Customer Service.
gates.com/pt
Gates Corporation
®
June 2012
Synchro-Power® Polyurethane Belting
Urethane belting can be modified in a variety of ways to suit users
needs.
Synchro-Power belting is ideal for various applications such as,
vacuum conveyors, linear positioning, assembly conveyors, robotics,
packaging conveying, glass conveyors, incline conveyors, paper
transfer, wafer conveying, food and beverage and indexing.
Features/Advantages
n Modifications include molded profiles, tensile cords, lamination
with various backings, and FDA and USDA constructions.
n Can be welded endless.
n Wide range of widths up to 18 inches.
n Steel tensile cord for length stability.
n Polyurethane body is abrasion, chemical and wear resistant for
extended life.
Recommended Pulleys
PowerGrip® Timing Pulleys
Notes
Synchro-Power LL belting is made to order. Contact Customer Service for price and availability.
Available Pitches
Metric
Timing
T5
T10
WT10 (Wide Width)
T20
AT5
AT10
AT20
5M HTD
8M HTD
14M HTD
XL
L
H
XH
WH (Wide Width)
Constructions Available
Steel Tensile
High Flex Steel Tensile
Kevlar Tensile
Nylon Tooth
Nylon Backing
Heavy Backing
FDA
SYNCHRO-POWER BELTING
®
Powering Progress.
gates.com/pt
67
June 2012
SYNCHRO-POWER BELTS
Synchro-Power® Polyurethane Belts
Endless urethane construction provides higher strength as
compared to welded urethane belts, making them well-suited for
use in power transmission and high-performance positioning
applications.
Synchro-Power metric pitch timing belts are ideal for use in office
machines, machine tools, postage equipment, sewing machines,
vending machines, agriculture, outdoor power equipment, wood
and paper, sand/gravel operations, oil fields, food processing and
HVAC.
Features/Advantages
n Abrasion, chemical, and wear resistant for extended life.
n Temperature ranges from -22°F to +176°F (-30°C to +80°C).
Contact the Gates Made-To-Order Metal Team
Notes
Synchro-Power belts listed on the following pages are available in custom widths as Standard/Non-Stock with no minimum order quantities
required. Contact Customer Service for minimum and maximum width range.
See end of this section for Made-to-Order lengths available. The minimum order quantity is full sleeve yield +/- 10%. Sleeve widths are 300mm
unless otherwise noted. Minimum belt width is 4mm. Please contact Customer Service for price and availability.
T5 Pitch — 4mm Wide
68
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-150-4
T5-165-4
T5-180-4
T5-185-4
T5-200-4
T5-215-4
T5-220-4
T5-225-4
T5-245-4
T5-250-4
T5-255-4
T5-260-4
T5-270-4
T5-275-4
T5-280-4
T5-295-4
T5-305-4
T5-330-4
T5-340-4
T5-350-4
T5-355-4
T5-365-4
T5-390-4
T5-400-4
T5-410-4
T5-420-4
T5-445-4
T5-450-4
T5-455-4
T5-475-4
T5-480-4
T5-500-4
T5-510-4
7762-1000
7762-1001
7762-1002
7762-1003
7762-1004
7762-1005
7762-1006
7762-1007
7762-1008
7762-1009
7762-1010
7762-1011
7762-1012
7762-1013
7762-1014
7762-1015
7762-1016
7762-1018
7762-1019
7762-1020
7762-1021
7762-1022
7762-1023
7762-1024
7762-1025
7762-1026
7762-1027
7762-1028
7762-1029
7762-1030
7762-1031
7762-1032
7762-1033
48
33
58
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
100
102
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
500
510
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
T5-525-4
T5-545-4
T5-550-4
T5-560-4
T5-575-4
T5-590-4
T5-600-4
T5-610-4
T5-620-4
T5-630-4
T5-640-4
T5-650-4
T5-660-4
T5-675-4
T5-690-4
T5-700-4
T5-720-4
T5-725-4
T5-750-4
T5-780-4
T5-800-4
T5-815-4
T5-830-4
T5-840-4
T5-850-4
T5-900-4
T5-940-4
T5-990-4
T5-1075-4
T5-1100-4
T5-1215-4
T5-1315-4
T5-1380-4
7762-1034
7762-1035
7762-1036
7762-1037
7762-1038
7762-0490
7762-0478
7762-1039
7762-1040
7762-1041
7762-1042
7762-1043
7762-1044
7762-1045
7762-1046
7762-1047
7762-1048
7762-0454
7762-1049
7762-1050
7762-0363
7762-1051
7762-0604
7762-1052
7762-0377
7762-1053
7762-1054
7762-1055
7762-1056
7762-1057
7762-1058
7762-1059
7762-1060
105
109
110
112
115
118
120
122
124
126
128
130
132
135
138
140
144
145
150
156
160
163
166
168
170
180
188
198
215
220
243
263
276
525
545
550
560
575
590
600
610
620
630
640
650
660
675
690
700
720
725
750
780
800
815
830
840
850
900
940
990
1075
1100
1215
1315
1380
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
gates.com/pt
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-150-6
T5-165-6
T5-180-6
T5-185-6
T5-200-6
T5-215-6
T5-220-6
T5-225-6
T5-245-6
T5-250-6
T5-255-6
T5-260-6
T5-270-6
T5-275-6
T5-280-6
T5-295-6
T5-305-6
T5-330-6
T5-340-6
T5-350-6
T5-355-6
T5-365-6
T5-390-6
T5-400-6
T5-410-6
T5-420-6
T5-445-6
T5-450-6
T5-455-6
T5-475-6
T5-480-6
T5-500-6
T5-510-6
7762-1070
7762-1071
7762-1072
7762-1073
7762-1074
7762-1075
7762-1076
7762-1077
7762-1078
7762-1079
7762-1080
7762-1081
7762-1082
7762-1083
7762-1084
7762-1085
7762-1086
7762-1088
7762-1089
7762-1090
7762-1091
7762-1092
7762-1093
7762-1094
7762-1095
7762-1096
7762-1097
7762-1098
7762-1099
7762-1100
7762-1101
7762-1102
7762-1103
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
100
102
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
500
510
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
T5-525-6
T5-545-6
T5-550-6
T5-560-6
T5-575-6
T5-590-6
T5-600-6
T5-610-6
T5-620-6
T5-630-6
T5-640-6
T5-650-6
T5-660-6
T5-675-6
T5-690-6
T5-700-6
T5-720-6
T5-725-6
T5-750-6
T5-780-6
T5-800-6
T5-815-6
T5-830-6
T5-840-6
T5-850-6
T5-900-6
T5-940-6
T5-990-6
T5-1075-6
T5-1100-6
T5-1215-6
T5-1315-6
T5-1380-6
7762-1104
7762-1105
7762-1106
7762-1107
7762-1108
7762-0491
7762-0479
7762-1109
7762-1110
7762-1111
7762-1112
7762-1113
7762-1114
7762-1115
7762-1116
7762-1117
7762-1118
7762-0455
7762-1119
7762-1120
7762-0364
7762-1121
7762-0605
7762-1122
7762-0378
7762-1123
7762-1124
7762-1125
7762-1126
7762-1127
7762-1128
7762-1129
7762-1130
105
109
110
112
115
118
120
122
124
126
128
130
132
135
138
140
144
145
150
156
160
163
166
168
170
180
188
198
215
220
243
263
276
525
545
550
560
575
590
600
610
620
630
640
650
660
675
690
700
720
725
750
780
800
815
830
840
850
900
940
990
1075
1100
1215
1315
1380
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.01
.02
.02
.05
.02
.02
.02
.05
.03
.03
.03
.03
.03
.04
.04
.04
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
T5-400-8
T5-410-8
T5-420-8
T5-445-8
T5-450-8
T5-455-8
T5-475-8
T5-480-8
T5-500-8
T5-510-8
T5-525-8
T5-545-8
T5-550-8
T5-560-8
T5-575-8
T5-590-8
T5-600-8
T5-610-8
T5-620-8
T5-630-8
T5-640-8
T5-650-8
T5-660-8
7762-1164
7762-1165
7762-1166
7762-1167
7762-1168
7762-1169
7762-1170
7762-1171
7762-1172
7762-1173
7762-1174
7762-1175
7762-1176
7762-1177
7762-1178
7762-0492
7762-0480
7762-1179
7762-1180
7762-1181
7762-1182
7762-1183
7762-1184
80
82
84
89
90
91
95
96
100
102
105
109
110
112
115
118
120
122
124
126
128
130
132
400
410
420
445
450
455
475
480
500
510
525
545
550
560
575
590
600
610
620
630
640
650
660
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
Part
No.
Product
No.
T5-150-8
T5-165-8
T5-180-8
T5-185-8
T5-200-8
T5-215-8
T5-220-8
T5-225-8
T5-245-8
T5-250-8
T5-255-8
T5-260-8
T5-270-8
T5-275-8
T5-280-8
T5-295-8
T5-305-8
T5-330-8
T5-340-8
T5-350-8
T5-355-8
T5-365-8
T5-390-8
7762-1140
7762-1141
7762-1142
7762-1143
7762-1144
7762-1145
7762-1146
7762-1147
7762-1148
7762-1149
7762-1150
7762-1151
7762-1152
7762-1153
7762-1154
7762-1155
7762-1156
7762-1158
7762-1159
7762-1160
7762-1161
7762-1162
7762-1163
®
Powering Progress.
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
gates.com/pt
69
June 2012
SYNCHRO-POWER BELTS
T5 Pitch — 8mm Wide (continued)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-675-8
T5-690-8
T5-700-8
T5-720-8
T5-725-8
T5-750-8
T5-780-8
T5-800-8
T5-815-8
T5-830-8
7762-1185
7762-1186
7762-1187
7762-1188
7762-0456
7762-1189
7762-1190
7762-0365
7762-1191
7762-0606
135
138
140
144
145
150
156
160
163
166
675
690
700
720
725
750
780
800
815
830
.03
.03
.03
.03
.01
.03
.03
.01
.03
.03
T5-840-8
T5-850-8
T5-900-8
T5-940-8
T5-990-8
T5-1075-8
T5-1100-8
T5-1215-8
T5-1315-8
T5-1380-8
7762-1192
7762-0379
7762-1193
7762-1194
7762-1195
7762-1196
7762-1197
7762-1198
7762-1199
7762-1200
168
170
180
188
198
215
220
243
263
276
840
850
900
940
990
1075
1100
1215
1315
1380
.03
.05
.03
.04
.04
.04
.04
.05
.05
.05
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-150-10
T5-165-10
T5-180-10
T5-185-10
T5-200-10
T5-215-10
T5-220-10
T5-225-10
T5-245-10
T5-250-10
T5-255-10
T5-260-10
T5-270-10
T5-275-10
T5-280-10
T5-295-10
T5-305-10
T5-330-10
T5-340-10
T5-350-10
T5-355-10
T5-365-10
T5-390-10
T5-400-10
T5-410-10
T5-420-10
T5-445-10
T5-450-10
T5-455-10
T5-475-10
T5-480-10
T5-500-10
T5-510-10
7762-1210
7762-1211
7762-1212
7762-1213
7762-1214
7762-1215
7762-1216
7762-1217
7762-1218
7762-1219
7762-1220
7762-1221
7762-1222
7762-1223
7762-1224
7762-1225
7762-1226
7762-1228
7762-1229
7762-1230
7762-1231
7762-1232
7762-1233
7762-1234
7762-1235
7762-1236
7762-1237
7762-1238
7762-1239
7762-1240
7762-1241
7762-1242
7762-1243
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
100
102
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
500
510
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
T5-525-10
T5-545-10
T5-550-10
T5-560-10
T5-575-10
T5-590-10
T5-600-10
T5-610-10
T5-620-10
T5-630-10
T5-640-10
T5-650-10
T5-660-10
T5-675-10
T5-690-10
T5-700-10
T5-720-10
T5-725-10
T5-750-10
T5-780-10
T5-800-10
T5-815-10
T5-830-10
T5-840-10
T5-850-10
T5-900-10
T5-940-10
T5-990-10
T5-1075-10
T5-1100-10
T5-1215-10
T5-1315-10
T5-1380-10
7762-1244
7762-1245
7762-1246
7762-1247
7762-1248
7762-0493
7762-0481
7762-1249
7762-1250
7762-1251
7762-1252
7762-1253
7762-1254
7762-1255
7762-1256
7762-1257
7762-1258
7762-0457
7762-1259
7762-1260
7762-0366
7762-1261
7762-0607
7762-1262
7762-0380
7762-1263
7762-1264
7762-1265
7762-1266
7762-1267
7762-1268
7762-1269
7762-1270
105
109
110
112
115
118
120
122
124
126
128
130
132
135
138
140
144
145
150
156
160
163
166
168
170
180
188
198
215
220
243
263
276
525
545
550
560
575
590
600
610
620
630
640
650
660
675
690
700
720
725
750
780
800
815
830
840
850
900
940
990
1075
1100
1215
1315
1380
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.05
.04
.04
.05
.04
.04
.04
.05
.04
.05
.05
.05
.05
.06
.06
.07
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
150
165
180
185
200
215
220
225
.01
.01
.01
.01
.01
.01
.01
.01
T5-245-12
T5-250-12
T5-255-12
T5-260-12
T5-270-12
T5-275-12
T5-280-12
T5-295-12
7762-1288
7762-1289
7762-1290
7762-1291
7762-1292
7762-1293
7762-1294
7762-1295
245
250
255
260
270
275
280
295
.01
.01
.01
.02
.02
.02
.02
.02
70
Part
No.
Product
No.
T5-150-12
T5-165-12
T5-180-12
T5-185-12
T5-200-12
T5-215-12
T5-220-12
T5-225-12
7762-1280
7762-1281
7762-1282
7762-1283
7762-1284
7762-1285
7762-1286
7762-1287
gates.com/pt
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-305-12
T5-330-12
T5-340-12
T5-350-12
T5-355-12
T5-365-12
T5-390-12
T5-400-12
T5-410-12
T5-420-12
T5-445-12
T5-450-12
T5-455-12
T5-475-12
T5-480-12
T5-500-12
T5-510-12
T5-525-12
T5-545-12
T5-550-12
T5-560-12
T5-575-12
T5-590-12
T5-600-12
T5-610-12
7762-1296
7762-1298
7762-1299
7762-1300
7762-1301
7762-1302
7762-1303
7762-1304
7762-1305
7762-1306
7762-1307
7762-1308
7762-1309
7762-1310
7762-1311
7762-1312
7762-1313
7762-1314
7762-1315
7762-1316
7762-1317
7762-1318
7762-0494
7762-0482
7762-1319
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
100
102
105
109
110
112
115
118
120
122
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
500
510
525
545
550
560
575
590
600
610
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.04
T5-620-12
T5-630-12
T5-640-12
T5-650-12
T5-660-12
T5-675-12
T5-690-12
T5-700-12
T5-720-12
T5-725-12
T5-750-12
T5-780-12
T5-800-12
T5-815-12
T5-830-12
T5-840-12
T5-850-12
T5-900-12
T5-940-12
T5-990-12
T5-1075-12
T5-1100-12
T5-1215-12
T5-1315-12
T5-1380-12
7762-1320
7762-1321
7762-1322
7762-1323
7762-1324
7762-1325
7762-1326
7762-1327
7762-1328
7762-0458
7762-1329
7762-1330
7762-0367
7762-1331
7762-0608
7762-1332
7762-0381
7762-1333
7762-1334
7762-1335
7762-1336
7762-1337
7762-1338
7762-1339
7762-1340
124
126
128
130
132
135
138
140
144
145
150
156
160
163
166
168
170
180
188
198
215
220
243
263
276
620
630
640
650
660
675
690
700
720
725
750
780
800
815
830
840
850
900
940
990
1075
1100
1215
1315
1380
.04
.04
.04
.04
.04
.04
.04
.04
.04
.05
.04
.05
.05
.05
.05
.05
.10
.05
.05
.06
.06
.06
.07
.08
.08
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
.01
.01
.01
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.04
.04
.04
T5-500-16
T5-510-16
T5-525-16
T5-545-16
T5-550-16
T5-560-16
T5-575-16
T5-590-16
T5-600-16
T5-610-16
T5-620-16
T5-630-16
T5-640-16
T5-650-16
T5-660-16
T5-675-16
T5-690-16
T5-700-16
T5-720-16
T5-725-16
T5-750-16
T5-780-16
T5-800-16
T5-815-16
T5-830-16
T5-840-16
T5-850-16
T5-900-16
T5-940-16
T5-990-16
T5-1075-16
7762-1382
7762-1383
7762-1384
7762-1385
7762-1386
7762-1387
7762-1388
7762-0495
7762-0483
7762-1389
7762-1390
7762-1391
7762-1392
7762-1393
7762-1394
7762-1395
7762-1396
7762-1397
7762-1398
7762-0459
7762-1399
7762-1400
7762-0369
7762-1401
7762-0609
7762-1402
7762-0383
7762-1403
7762-1404
7762-1405
7762-1406
100
102
105
109
110
112
115
118
120
122
124
126
128
130
132
135
138
140
144
145
150
156
160
163
166
168
170
180
188
198
215
500
510
525
545
550
560
575
590
600
610
620
630
640
650
660
675
690
700
720
725
750
780
800
815
830
840
850
900
940
990
1075
.04
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
.05
.05
.05
.05
.05
.06
.10
.06
.06
.10
.06
.06
.06
.10
.07
.07
.08
.08
Part
No.
Product
No.
T5-150-16
T5-165-16
T5-180-16
T5-185-16
T5-200-16
T5-215-16
T5-220-16
T5-225-16
T5-245-16
T5-250-16
T5-255-16
T5-260-16
T5-270-16
T5-275-16
T5-280-16
T5-295-16
T5-305-16
T5-330-16
T5-340-16
T5-350-16
T5-355-16
T5-365-16
T5-390-16
T5-400-16
T5-410-16
T5-420-16
T5-445-16
T5-450-16
T5-455-16
T5-475-16
T5-480-16
7762-1350
7762-1351
7762-1352
7762-1353
7762-1354
7762-1355
7762-1356
7762-1357
7762-1358
7762-1359
7762-1360
7762-1361
7762-1362
7762-1363
7762-1364
7762-1365
7762-1366
7762-1368
7762-1369
7762-1370
7762-1371
7762-1372
7762-1373
7762-1374
7762-1375
7762-1376
7762-1377
7762-1378
7762-1379
7762-1380
7762-1381
®
Powering Progress.
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
gates.com/pt
71
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-1100-16
T5-1215-16
7762-1407
7762-1408
220
243
1100
1215
.08
.09
T5-1315-16
T5-1380-16
7762-1409
7762-1410
263
276
1315
1380
.10
.11
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-150-20
T5-165-20
T5-180-20
T5-185-20
T5-200-20
T5-215-20
T5-220-20
T5-225-20
T5-245-20
T5-250-20
T5-255-20
T5-260-20
T5-270-20
T5-275-20
T5-280-20
T5-295-20
T5-305-20
T5-330-20
T5-340-20
T5-350-20
T5-355-20
T5-365-20
T5-390-20
T5-400-20
T5-410-20
T5-420-20
T5-445-20
T5-450-20
T5-455-20
T5-475-20
T5-480-20
T5-500-20
T5-510-20
7762-1420
7762-1421
7762-1422
7762-1423
7762-1424
7762-1425
7762-1426
7762-1427
7762-1428
7762-1429
7762-1430
7762-1431
7762-1432
7762-1433
7762-1434
7762-1435
7762-1436
7762-1438
7762-1439
7762-1440
7762-1441
7762-1442
7762-1443
7762-1444
7762-1445
7762-1446
7762-1447
7762-1448
7762-1449
7762-1450
7762-1451
7762-1452
7762-1453
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
100
102
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
500
510
.01
.02
.02
.02
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.04
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
T5-525-20
T5-545-20
T5-550-20
T5-560-20
T5-575-20
T5-590-20
T5-600-20
T5-610-20
T5-620-20
T5-630-20
T5-640-20
T5-650-20
T5-660-20
T5-675-20
T5-690-20
T5-700-20
T5-720-20
T5-725-20
T5-750-20
T5-780-20
T5-800-20
T5-815-20
T5-830-20
T5-840-20
T5-850-20
T5-900-20
T5-940-20
T5-990-20
T5-1075-20
T5-1100-20
T5-1215-20
T5-1315-20
T5-1380-20
7762-1454
7762-1455
7762-1456
7762-1457
7762-1458
7762-0496
7762-0484
7762-1459
7762-1460
7762-1461
7762-1462
7762-1463
7762-1464
7762-1465
7762-1466
7762-1467
7762-1468
7762-0460
7762-1469
7762-1470
7762-0370
7762-1471
7762-0610
7762-1472
7762-0384
7762-1473
7762-1474
7762-1475
7762-1476
7762-1477
7762-1478
7762-1479
7762-1480
105
109
110
112
115
118
120
122
124
126
128
130
132
135
138
140
144
145
150
156
160
163
166
168
170
180
188
198
215
220
243
263
276
525
545
550
560
575
590
600
610
620
630
640
650
660
675
690
700
720
725
750
780
800
815
830
840
850
900
940
990
1075
1100
1215
1315
1380
.05
.05
.05
.05
.06
.06
.06
.06
.06
.06
.06
.06
.06
.06
.07
.07
.07
.10
.07
.08
.10
.08
.08
.08
.10
.09
.09
.10
.10
.11
.12
.13
.13
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
.02
.02
.02
.02
.02
.03
.03
.03
.03
.03
.03
.03
.03
.03
.03
.04
T5-305-25
T5-330-25
T5-340-25
T5-350-25
T5-355-25
T5-365-25
T5-390-25
T5-400-25
T5-410-25
T5-420-25
T5-445-25
T5-450-25
T5-455-25
T5-475-25
T5-480-25
T5-500-25
7762-1506
7762-1508
7762-1509
7762-1510
7762-1511
7762-1512
7762-1513
7762-1514
7762-1515
7762-1516
7762-1517
7762-1518
7762-1519
7762-1520
7762-1521
7762-1522
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
100
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
500
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
.05
.05
.05
.06
.06
.06
72
Part
No.
Product
No.
T5-150-25
T5-165-25
T5-180-25
T5-185-25
T5-200-25
T5-215-25
T5-220-25
T5-225-25
T5-245-25
T5-250-25
T5-255-25
T5-260-25
T5-270-25
T5-275-25
T5-280-25
T5-295-25
7762-1490
7762-1491
7762-1492
7762-1493
7762-1494
7762-1495
7762-1496
7762-1497
7762-1498
7762-1499
7762-1500
7762-1501
7762-1502
7762-1503
7762-1504
7762-1505
gates.com/pt
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-510-25
T5-525-25
T5-545-25
T5-550-25
T5-560-25
T5-575-25
T5-590-25
T5-600-25
T5-610-25
T5-620-25
T5-630-25
T5-640-25
T5-650-25
T5-660-25
T5-675-25
T5-690-25
T5-700-25
7762-1523
7762-1524
7762-1525
7762-1526
7762-1527
7762-1528
7762-0497
7762-0485
7762-1529
7762-1530
7762-1531
7762-1532
7762-1533
7762-1534
7762-1535
7762-1536
7762-1537
102
105
109
110
112
115
118
120
122
124
126
128
130
132
135
138
140
510
525
545
550
560
575
590
600
610
620
630
640
650
660
675
690
700
.06
.06
.07
.07
.07
.07
.07
.07
.07
.07
.08
.08
.08
.08
.08
.08
.08
T5-720-25
T5-725-25
T5-750-25
T5-780-25
T5-800-25
T5-815-25
T5-830-25
T5-840-25
T5-850-25
T5-900-25
T5-940-25
T5-990-25
T5-1075-25
T5-1100-25
T5-1215-25
T5-1315-25
T5-1380-25
7762-1538
7762-0461
7762-1539
7762-1540
7762-0371
7762-1541
7762-0611
7762-1542
7762-0385
7762-1543
7762-1544
7762-1545
7762-1546
7762-1547
7762-1548
7762-1549
7762-1550
144
145
150
156
160
163
166
168
170
180
188
198
215
220
243
263
276
720
725
750
780
800
815
830
840
850
900
940
990
1075
1100
1215
1315
1380
.09
.10
.09
.09
.15
.10
.10
.10
.15
.11
.11
.12
.13
.13
.15
.16
.17
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-150-32
T5-165-32
T5-180-32
T5-185-32
T5-200-32
T5-215-32
T5-220-32
T5-225-32
T5-245-32
T5-250-32
T5-255-32
T5-260-32
T5-270-32
T5-275-32
T5-280-32
T5-295-32
T5-305-32
T5-330-32
T5-340-32
T5-350-32
T5-355-32
T5-365-32
T5-390-32
T5-400-32
T5-410-32
T5-420-32
T5-445-32
T5-450-32
T5-455-32
T5-475-32
T5-480-32
T5-500-32
T5-510-32
7762-1560
7762-1561
7762-1562
7762-1563
7762-1564
7762-1565
7762-1566
7762-1567
7762-1568
7762-1569
7762-1570
7762-1571
7762-1572
7762-1573
7762-1574
7762-1575
7762-1576
7762-1578
7762-1579
7762-1580
7762-1581
7762-1582
7762-1583
7762-1584
7762-1585
7762-1586
7762-1587
7762-1588
7762-1589
7762-1590
7762-1591
7762-1592
7762-1593
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
100
102
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
500
510
.02
.03
.03
.03
.03
.03
.03
.03
.04
.04
.04
.04
.04
.04
.04
.05
.05
.05
.05
.05
.05
.06
.06
.06
.06
.06
.07
.07
.07
.07
.07
.08
.08
T5-525-32
T5-545-32
T5-550-32
T5-560-32
T5-575-32
T5-590-32
T5-600-32
T5-610-32
T5-620-32
T5-630-32
T5-640-32
T5-650-32
T5-660-32
T5-675-32
T5-690-32
T5-700-32
T5-720-32
T5-725-32
T5-750-32
T5-780-32
T5-800-32
T5-815-32
T5-830-32
T5-840-32
T5-850-32
T5-900-32
T5-940-32
T5-990-32
T5-1075-32
T5-1100-32
T5-1215-32
T5-1315-32
T5-1380-32
7762-1594
7762-1595
7762-1596
7762-1597
7762-1598
7762-0498
7762-0486
7762-1599
7762-1600
7762-1601
7762-1602
7762-1603
7762-1604
7762-1605
7762-1606
7762-1607
7762-1608
7762-0462
7762-1609
7762-1610
7762-0372
7762-1611
7762-0612
7762-1612
7762-0386
7762-1613
7762-1614
7762-1615
7762-1616
7762-1617
7762-1618
7762-1619
7762-1620
105
109
110
112
115
118
120
122
124
126
128
130
132
135
138
140
144
145
150
156
160
163
166
168
170
180
188
198
215
220
243
263
276
525
545
550
560
575
590
600
610
620
630
640
650
660
675
690
700
720
725
750
780
800
815
830
840
850
900
940
990
1075
1100
1215
1315
1380
.08
.08
.08
.09
.09
.09
.09
.09
.10
.10
.10
.10
.10
.10
.11
.11
.11
.11
.12
.12
.13
.13
.13
.13
.13
.14
.14
.15
.17
.17
.19
.20
.21
®
Powering Progress.
gates.com/pt
73
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-150-50
T5-165-50
T5-180-50
T5-185-50
T5-200-50
T5-215-50
T5-220-50
T5-225-50
T5-245-50
T5-250-50
T5-255-50
T5-260-50
T5-270-50
T5-275-50
T5-280-50
T5-295-50
T5-305-50
T5-330-50
T5-340-50
T5-350-50
T5-355-50
T5-365-50
T5-390-50
T5-400-50
T5-410-50
T5-420-50
T5-445-50
T5-450-50
T5-455-50
T5-475-50
T5-480-50
T5-500-50
T5-510-50
7762-1630
7762-1631
7762-1632
7762-1633
7762-1634
7762-1635
7762-1636
7762-1637
7762-1638
7762-1639
7762-1640
7762-1641
7762-1642
7762-1643
7762-1644
7762-1645
7762-1646
7762-1648
7762-1649
7762-1650
7762-1651
7762-1652
7762-1653
7762-1654
7762-1655
7762-1656
7762-1657
7762-1658
7762-1659
7762-1660
7762-1661
7762-1662
7762-1663
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
100
102
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
500
510
.04
.04
.04
.04
.05
.05
.05
.05
.06
.06
.06
.06
.06
.07
.07
.07
.07
.08
.08
.08
.09
.09
.09
.10
.10
.10
.11
.11
.11
.11
.12
.12
.12
T5-525-50
T5-545-50
T5-550-50
T5-560-50
T5-575-50
T5-590-50
T5-600-50
T5-610-50
T5-620-50
T5-630-50
T5-640-50
T5-650-50
T5-660-50
T5-675-50
T5-690-50
T5-700-50
T5-720-50
T5-725-50
T5-750-50
T5-780-50
T5-800-50
T5-815-50
T5-830-50
T5-840-50
T5-850-50
T5-900-50
T5-940-50
T5-990-50
T5-1075-50
T5-1100-50
T5-1215-50
T5-1315-50
T5-1380-50
7762-1664
7762-1665
7762-1666
7762-1667
7762-1668
7762-0499
7762-0487
7762-1669
7762-1670
7762-1671
7762-1672
7762-1673
7762-1674
7762-1675
7762-1676
7762-1677
7762-1678
7762-0463
7762-1679
7762-1680
7762-0373
7762-1681
7762-0613
7762-1682
7762-0387
7762-1683
7762-1684
7762-1685
7762-1686
7762-1687
7762-1688
7762-1689
7762-1690
105
109
110
112
115
118
120
122
124
126
128
130
132
135
138
140
144
145
150
156
160
163
166
168
170
180
188
198
215
220
243
263
276
525
545
550
560
575
590
600
610
620
630
640
650
660
675
690
700
720
725
750
780
800
815
830
840
850
900
940
990
1075
1100
1215
1315
1380
.13
.13
.13
.13
.14
.14
.14
.15
.15
.15
.15
.16
.16
.16
.17
.17
.17
.17
.18
.19
.20
.20
.20
.20
.20
.22
.23
.24
.26
.26
.29
.32
.33
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
.05
.06
.06
.07
.07
.08
.08
.08
.09
.09
.09
.09
.10
.10
.10
.11
.11
.12
.12
.13
.13
.13
.14
T5-400-75
T5-410-75
T5-420-75
T5-445-75
T5-450-75
T5-455-75
T5-475-75
T5-480-75
T5-500-75
T5-510-75
T5-525-75
T5-545-75
T5-550-75
T5-560-75
T5-575-75
T5-590-75
T5-600-75
T5-610-75
T5-620-75
T5-630-75
T5-640-75
T5-650-75
T5-660-75
7762-1724
7762-1725
7762-1726
7762-1727
7762-1728
7762-1729
7762-1730
7762-1731
7762-1732
7762-1733
7762-1734
7762-1735
7762-1736
7762-1737
7762-1738
7762-0500
7762-0488
7762-1739
7762-1740
7762-1741
7762-1742
7762-1743
7762-1744
80
82
84
89
90
91
95
96
100
102
105
109
110
112
115
118
120
122
124
126
128
130
132
400
410
420
445
450
455
475
480
500
510
525
545
550
560
575
590
600
610
620
630
640
650
660
.14
.15
.15
.16
.16
.16
.17
.17
.18
.18
.19
.20
.20
.20
.21
.21
.21
.22
.22
.23
.23
.23
.24
74
Part
No.
Product
No.
T5-150-75
T5-165-75
T5-180-75
T5-185-75
T5-200-75
T5-215-75
T5-220-75
T5-225-75
T5-245-75
T5-250-75
T5-255-75
T5-260-75
T5-270-75
T5-275-75
T5-280-75
T5-295-75
T5-305-75
T5-330-75
T5-340-75
T5-350-75
T5-355-75
T5-365-75
T5-390-75
7762-1700
7762-1701
7762-1702
7762-1703
7762-1704
7762-1705
7762-1706
7762-1707
7762-1708
7762-1709
7762-1710
7762-1711
7762-1712
7762-1713
7762-1714
7762-1715
7762-1716
7762-1718
7762-1719
7762-1720
7762-1721
7762-1722
7762-1723
gates.com/pt
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-675-75
T5-690-75
T5-700-75
T5-720-75
T5-725-75
T5-750-75
T5-780-75
T5-800-75
T5-815-75
T5-830-75
7762-1745
7762-1746
7762-1747
7762-1748
7762-0464
7762-1749
7762-1750
7762-0374
7762-1751
7762-0614
135
138
140
144
145
150
156
160
163
166
675
690
700
720
725
750
780
800
815
830
.24
.25
.25
.26
.26
.27
.28
.29
.29
.29
T5-840-75
T5-850-75
T5-900-75
T5-940-75
T5-990-75
T5-1075-75
T5-1100-75
T5-1215-75
T5-1315-75
T5-1380-75
7762-1752
7762-0388
7762-1753
7762-1754
7762-1755
7762-1756
7762-1757
7762-1758
7762-1759
7762-1760
168
170
180
188
198
215
220
243
263
276
840
850
900
940
990
1075
1100
1215
1315
1380
.30
.30
.32
.34
.36
.39
.40
.44
.47
.50
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T5-150-200
T5-165-200
T5-180-200
T5-185-200
T5-200-200
T5-215-200
T5-220-200
T5-225-200
T5-245-200
T5-250-200
T5-255-200
T5-260-200
T5-270-200
T5-275-200
T5-280-200
T5-295-200
T5-305-200
T5-330-200
T5-340-200
T5-350-200
T5-355-200
T5-365-200
T5-390-200
T5-400-200
T5-410-200
T5-420-200
T5-445-200
T5-450-200
T5-455-200
T5-475-200
T5-480-200
T5-500-200
T5-510-200
7762-1770
7762-1771
7762-1772
7762-1773
7762-1774
7762-1775
7762-1776
7762-1777
7762-1778
7762-1779
7762-1780
7762-1781
7762-1782
7762-1783
7762-1784
7762-1785
7762-1786
7762-1788
7762-1789
7762-1790
7762-1791
7762-1792
7762-1793
7762-1794
7762-1795
7762-1796
7762-1797
7762-1798
7762-1799
7762-1800
7762-1801
7762-1802
7762-1803
30
33
36
37
40
43
44
45
49
50
51
52
54
55
56
59
61
66
68
70
71
73
78
80
82
84
89
90
91
95
96
100
102
150
165
180
185
200
215
220
225
245
250
255
260
270
275
280
295
305
330
340
350
355
365
390
400
410
420
445
450
455
475
480
500
510
.14
.16
.17
.18
.19
.21
.21
.22
.24
.24
.25
.25
.26
.26
.27
.28
.29
.32
.33
.34
.34
.35
.38
.38
.39
.40
.43
.43
.44
.46
.46
.48
.49
T5-525-200
T5-545-200
T5-550-200
T5-560-200
T5-575-200
T5-590-200
T5-600-200
T5-610-200
T5-620-200
T5-630-200
T5-640-200
T5-650-200
T5-660-200
T5-675-200
T5-690-200
T5-700-200
T5-720-200
T5-725-200
T5-750-200
T5-780-200
T5-800-200
T5-815-200
T5-830-200
T5-840-200
T5-850-200
T5-900-200
T5-940-200
T5-990-200
T5-1075-200
T5-1100-200
T5-1215-200
T5-1315-200
T5-1380-200
7762-1804
7762-1805
7762-1806
7762-1807
7762-1808
7762-0501
7762-0489
7762-1809
7762-1810
7762-1811
7762-1812
7762-1813
7762-1814
7762-1815
7762-1816
7762-1817
7762-1818
7762-0465
7762-1819
7762-1820
7762-0376
7762-1821
7762-0615
7762-1822
7762-0390
7762-1823
7762-1824
7762-1825
7762-1826
7762-1827
7762-1828
7762-1829
7762-1830
105
109
110
112
115
118
120
122
124
126
128
130
132
135
138
140
144
145
150
156
160
163
166
168
170
180
188
198
215
220
243
263
276
525
545
550
560
575
590
600
610
620
630
640
650
660
675
690
700
720
725
750
780
800
815
830
840
850
900
940
990
1075
1100
1215
1315
1380
.51
.52
.53
.54
.55
.56
.58
.59
.60
.61
.62
.63
.63
.65
.66
.67
.69
.69
.72
.75
.77
.78
.78
.81
.82
.87
.90
.95
1.03
1.06
1.17
1.26
1.33
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
260
370
400
410
440
450
500
530
.03
.04
.04
.04
.04
.05
.05
.05
T10-560-10
T10-600-10
T10-610-10
T10-630-10
T10-660-10
T10-690-10
T10-700-10
T10-720-10
7762-2008
7762-2009
7762-2010
7762-2011
7762-2012
7762-2013
7762-2014
7762-2015
560
600
610
630
660
690
700
720
.06
.06
.06
.06
.07
.07
.07
.07
Part
No.
Product
No.
T10-260-10
T10-370-10
T10-400-10
T10-410-10
T10-440-10
T10-450-10
T10-500-10
T10-530-10
7762-2000
7762-2001
7762-2002
7762-2003
7762-2004
7762-2005
7762-2006
7762-2007
®
Powering Progress.
26
37
40
41
44
45
50
53
56
60
61
63
66
69
70
72
gates.com/pt
75
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-730-10
T10-750-10
T10-780-10
T10-800-10
T10-810-10
T10-840-10
T10-880-10
T10-890-10
T10-900-10
T10-910-10
T10-920-10
T10-950-10
T10-960-10
T10-970-10
T10-980-10
T10-1000-10
T10-1010-10
T10-1080-10
T10-1100-10
T10-1110-10
T10-1140-10
T10-1150-10
7762-2016
7762-2017
7762-2018
7762-0326
7762-2019
7762-2020
7762-2021
7762-2022
7762-2023
7762-2024
7762-2025
7762-0339
7762-2026
7762-2027
7762-2028
7762-0352
7762-2029
7762-2030
7762-2031
7762-2032
7762-2033
7762-2034
73
75
78
80
81
84
88
89
90
91
92
95
96
97
98
100
101
108
110
111
114
115
730
750
780
800
810
840
880
890
900
910
920
950
960
970
980
1000
1010
1080
1100
1110
1140
1150
.07
.08
.08
.10
.08
.08
.09
.09
.09
.09
.09
.10
.10
.10
.10
.15
.10
.11
.11
.11
.11
.12
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
260
370
400
410
440
450
500
530
560
600
610
630
660
690
700
720
730
750
780
800
810
840
880
890
900
910
920
950
960
970
.03
.04
.05
.05
.05
.05
.06
.06
.07
.07
.07
.08
.08
.08
.08
.09
.09
.09
.09
.10
.10
.10
.11
.11
.11
.11
.11
.12
.12
.12
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-1210-10
T10-1240-10
T10-1250-10
T10-1300-10
T10-1320-10
T10-1350-10
T10-1390-10
T10-1400-10
T10-1420-10
T10-1450-10
T10-1460-10
T10-1500-10
T10-1560-10
T10-1600-10
T10-1610-10
T10-1700-10
T10-1750-10
T10-1780-10
T10-1880-10
T10-1960-10
T10-2250-10
7762-2035
7762-2036
7762-2037
7762-2038
7762-2039
7762-2040
7762-2041
7762-2042
7762-2043
7762-2044
7762-2045
7762-2046
7762-2047
7762-0616
7762-2048
7762-0593
7762-2049
7762-2050
7762-2051
7762-2052
7762-2053
121
124
125
130
132
135
139
140
142
145
146
150
156
160
161
170
175
178
188
196
225
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1600
1600
1610
1700
1750
1780
1880
1960
2250
.12
.12
.13
.13
.13
.14
.14
.14
.14
.15
.15
.15
.16
.16
.16
.09
.18
.18
.19
.20
.23
76
Part
No.
Product
No.
T10-260-12
T10-370-12
T10-400-12
T10-410-12
T10-440-12
T10-450-12
T10-500-12
T10-530-12
T10-560-12
T10-600-12
T10-610-12
T10-630-12
T10-660-12
T10-690-12
T10-700-12
T10-720-12
T10-730-12
T10-750-12
T10-780-12
T10-800-12
T10-810-12
T10-840-12
T10-880-12
T10-890-12
T10-900-12
T10-910-12
T10-920-12
T10-950-12
T10-960-12
T10-970-12
7762-2054
7762-2055
7762-2056
7762-2057
7762-2058
7762-2059
7762-2060
7762-2061
7762-2062
7762-2063
7762-2064
7762-2065
7762-2066
7762-2067
7762-2068
7762-2069
7762-2070
7762-2071
7762-2072
7762-0327
7762-2073
7762-2074
7762-2075
7762-2076
7762-2077
7762-2078
7762-2079
7762-0340
7762-2080
7762-2081
gates.com/pt
26
37
40
41
44
45
50
53
56
60
61
63
66
69
70
72
73
75
78
80
81
84
88
89
90
91
92
95
96
97
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-980-12
T10-1000-12
T10-1010-12
T10-1080-12
T10-1100-12
T10-1110-12
T10-1140-12
T10-1150-12
T10-1210-12
T10-1240-12
T10-1250-12
T10-1300-12
T10-1320-12
T10-1350-12
T10-1390-12
T10-1400-12
T10-1420-12
T10-1450-12
T10-1460-12
T10-1500-12
T10-1560-12
T10-1600-12
T10-1610-12
T10-1700-12
T10-1750-12
T10-1780-12
T10-1880-12
T10-1960-12
T10-2250-12
7762-2082
7762-0353
7762-2083
7762-2084
7762-2085
7762-2086
7762-2087
7762-2088
7762-2089
7762-2090
7762-2091
7762-2092
7762-2093
7762-2094
7762-2095
7762-2096
7762-2097
7762-2098
7762-2099
7762-2100
7762-2101
7762-0617
7762-2102
7762-0594
7762-2103
7762-2104
7762-2105
7762-2106
7762-2107
98
100
101
108
110
111
114
115
121
124
125
130
132
135
139
140
142
145
146
150
156
160
161
170
175
178
188
196
225
980
1000
1010
1080
1100
1110
1140
1150
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1560
1600
1610
1700
1750
1780
1880
1960
2250
.12
.12
.12
.13
.13
.13
.14
.14
.15
.15
.15
.16
.16
.16
.17
.17
.17
.17
.18
.18
.19
.19
.19
.11
.21
.21
.23
.24
.27
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
T10-260-14
T10-370-14
T10-400-14
T10-410-14
T10-440-14
T10-450-14
T10-500-14
T10-530-14
T10-560-14
T10-600-14
T10-610-14
T10-630-14
T10-660-14
T10-690-14
T10-700-14
T10-720-14
T10-730-14
T10-750-14
T10-780-14
T10-800-14
T10-810-14
T10-840-14
T10-880-14
T10-890-14
T10-900-14
T10-910-14
T10-920-14
T10-950-14
T10-960-14
T10-970-14
7762-2108
7762-2109
7762-2110
7762-2111
7762-2112
7762-2113
7762-2114
7762-2115
7762-2116
7762-2117
7762-2118
7762-2119
7762-2120
7762-2121
7762-2122
7762-2123
7762-2124
7762-2125
7762-2126
7762-0328
7762-2127
7762-2128
7762-2129
7762-2130
7762-2131
7762-2132
7762-2133
7762-0341
7762-2134
7762-2135
No. of
Teeth
26
37
40
41
44
45
50
63
56
60
61
63
66
69
70
72
73
75
78
80
81
84
88
89
90
91
92
95
96
97
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
260
370
400
410
440
450
500
530
560
600
610
630
660
690
700
720
730
750
780
800
810
840
880
890
900
910
920
950
960
970
.04
.05
.06
.06
.06
.06
.07
.07
.08
.08
.09
.09
.09
.10
.10
.10
.10
.11
.11
.15
.11
.12
.12
.13
.13
.13
.13
.20
.13
.14
T10-980-14
T10-1000-14
T10-1010-14
T10-1080-14
T10-1100-14
T10-1110-14
T10-1140-14
T10-1150-14
T10-1210-14
T10-1240-14
T10-1250-14
T10-1300-14
T10-1320-14
T10-1350-14
T10-1390-14
T10-1400-14
T10-1420-14
T10-1450-14
T10-1460-14
T10-1500-14
T10-1560-14
T10-1600-14
T10-1610-14
T10-1700-14
T10-1750-14
T10-1780-14
T10-1880-14
T10-1960-14
T10-2250-14
7762-2136
7762-0354
7762-2137
7762-2138
7762-2139
7762-2140
7762-2141
7762-2142
7762-2143
7762-2144
7762-2145
7762-2146
7762-2147
7762-2148
7762-2149
7762-2150
7762-2151
7762-2152
7762-2153
7762-2154
7762-2155
7762-0618
7762-2156
7762-0595
7762-2157
7762-2158
7762-2159
7762-2160
7762-2161
98
100
101
108
110
111
114
115
121
124
125
130
132
135
139
140
142
145
146
150
156
160
161
170
175
178
188
196
225
980
1000
1010
1080
1100
1110
1140
1150
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1560
1600
1610
1700
1750
1780
1880
1960
2250
.14
.20
.14
.15
.15
.16
.16
.16
.17
.17
.18
.18
.19
.19
.20
.20
.20
.20
.21
.21
.22
.27
.23
.13
.25
.25
.26
.28
.32
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
260
370
400
410
440
450
500
530
560
600
610
630
660
690
700
720
730
750
780
800
810
840
880
890
900
910
.04
.06
.06
.07
.07
.07
.08
.09
.09
.10
.10
.10
.11
.11
.11
.12
.12
.12
.13
.15
.13
.13
.14
.14
.14
.15
T10-920-16
T10-950-16
T10-960-16
T10-970-16
T10-980-16
T10-1000-16
T10-1010-16
T10-1080-16
T10-1100-16
T10-1110-16
T10-1140-16
T10-1150-16
T10-1210-16
T10-1240-16
T10-1250-16
T10-1300-16
T10-1320-16
T10-1350-16
T10-1390-16
T10-1400-16
T10-1420-16
T10-1450-16
T10-1460-16
T10-1500-16
T10-1560-16
T10-1600-16
7762-2190
7762-0342
7762-2191
7762-2192
7762-2193
7762-0355
7762-2194
7762-2195
7762-2196
7762-2197
7762-2198
7762-2199
7762-2200
7762-2201
7762-2202
7762-2203
7762-2204
7762-2205
7762-2206
7762-2207
7762-2208
7762-2209
7762-2210
7762-2211
7762-2212
7762-0619
92
95
96
97
98
100
101
108
110
111
114
115
121
124
125
130
132
135
139
140
142
145
146
150
156
160
920
950
960
970
980
1000
1010
1080
1100
1110
1140
1150
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1560
1600
.15
.20
.15
.16
.16
.20
.16
.17
.18
.18
.18
.18
.19
.20
.20
.21
.21
.22
.22
.22
.23
.23
.23
.24
.25
.26
Part
No.
Product
No.
T10-260-16
T10-370-16
T10-400-16
T10-410-16
T10-440-16
T10-450-16
T10-500-16
T10-530-16
T10-560-16
T10-600-16
T10-610-16
T10-630-16
T10-660-16
T10-690-16
T10-700-16
T10-720-16
T10-730-16
T10-750-16
T10-780-16
T10-800-16
T10-810-16
T10-840-16
T10-880-16
T10-890-16
T10-900-16
T10-910-16
7762-2165
7762-2166
7762-2167
7762-2168
7762-2169
7762-2170
7762-2171
7762-2172
7762-2173
7762-2174
7762-2175
7762-2176
7762-2177
7762-2178
7762-2179
7762-2180
7762-2181
7762-2182
7762-2183
7762-0329
7762-2184
7762-2185
7762-2186
7762-2187
7762-2188
7762-2189
®
Powering Progress.
No. of
Teeth
26
37
40
41
44
45
50
53
56
60
61
63
66
69
70
72
73
75
78
80
81
84
88
89
90
91
gates.com/pt
77
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-1610-16
T10-1700-16
T10-1750-16
T10-1780-16
7762-2213
7762-0596
7762-2214
7762-2215
161
170
175
178
1610
1700
1750
1780
.26
.15
.28
.29
T10-1880-16
T10-1960-16
T10-2250-16
7762-2216
7762-2217
7762-2218
188
196
225
1880
1960
2250
.30
.31
.36
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
260
370
400
410
440
450
500
530
560
600
610
630
660
690
700
720
730
750
780
800
810
840
880
890
900
910
920
950
960
970
.05
.07
.08
.08
.09
.09
.10
.11
.11
.12
.12
.13
.13
.14
.14
.14
.15
.15
.16
.20
.16
.17
.18
.18
.18
.18
.18
.25
.19
.19
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
260
370
400
410
440
450
500
530
560
600
610
630
660
690
700
720
730
.07
.09
.10
.10
.11
.11
.13
.13
.14
.15
.15
.16
.17
.17
.18
.18
.18
T10-750-25
T10-780-25
T10-800-25
T10-810-25
T10-840-25
T10-880-25
T10-890-25
T10-900-25
T10-910-25
T10-920-25
T10-950-25
T10-960-25
T10-970-25
T10-980-25
T10-1000-25
T10-1010-25
T10-1080-25
7762-2292
7762-2293
7762-0331
7762-2294
7762-2295
7762-2296
7762-2297
7762-2298
7762-2299
7762-2300
7762-0344
7762-2301
7762-2302
7762-2303
7762-0357
7762-2304
7762-2305
Part
No.
Product
No.
T10-260-20
T10-370-20
T10-400-20
T10-410-20
T10-440-20
T10-450-20
T10-500-20
T10-530-20
T10-560-20
T10-600-20
T10-610-20
T10-630-20
T10-660-20
T10-690-20
T10-700-20
T10-720-20
T10-730-20
T10-750-20
T10-780-20
T10-800-20
T10-810-20
T10-840-20
T10-880-20
T10-890-20
T10-900-20
T10-910-20
T10-920-20
T10-950-20
T10-960-20
T10-970-20
7762-2220
7762-2221
7762-2222
7762-2223
7762-2224
7762-2225
7762-2226
7762-2227
7762-2228
7762-2229
7762-2230
7762-2231
7762-2232
7762-2233
7762-2234
7762-2235
7762-2236
7762-2237
7762-2238
7762-0330
7762-2239
7762-2240
7762-2241
7762-2242
7762-2243
7762-2244
7762-2245
7762-0343
7762-2246
7762-2247
26
37
40
41
44
45
50
53
56
60
61
63
66
69
70
72
73
75
78
80
81
84
88
89
90
91
92
95
96
97
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-980-20
T10-1000-20
T10-1010-20
T10-1080-20
T10-1100-20
T10-1110-20
T10-1140-20
T10-1150-20
T10-1210-20
T10-1240-20
T10-1250-20
T10-1300-20
T10-1320-20
T10-1350-20
T10-1390-20
T10-1400-20
T10-1420-20
T10-1450-20
T10-1460-20
T10-1500-20
T10-1560-20
T10-1600-20
T10-1610-20
T10-1700-20
T10-1750-20
T10-1780-20
T10-1880-20
T10-1960-20
T10-2250-20
7762-2248
7762-0356
7762-2249
7762-2250
7762-2251
7762-2252
7762-2253
7762-2254
7762-2255
7762-2256
7762-2257
7762-2258
7762-2259
7762-2260
7762-2261
7762-2262
7762-2263
7762-2264
7762-2265
7762-2266
7762-2267
7762-0620
7762-2268
7762-0597
7762-2269
7762-2270
7762-2271
7762-2272
7762-2273
98
100
101
108
110
111
114
115
121
124
125
130
132
135
139
140
142
145
146
150
156
160
161
170
175
178
188
196
225
980
1000
1010
1080
1100
1110
1140
1150
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1560
1600
1610
1700
1750
1780
1880
1960
2250
.20
.25
.20
.22
.22
.22
.23
.23
.24
.25
.25
.26
.27
.27
.28
.28
.29
.29
.29
.30
.31
.32
.32
.19
.35
.36
.38
.39
.45
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
75
78
80
81
84
88
89
90
91
92
95
96
97
98
100
101
108
750
780
800
810
840
880
890
900
910
920
950
960
970
980
1000
1010
1080
.19
.20
.25
.20
.21
.22
.22
.23
.23
.23
.25
.24
.24
.25
.25
.25
.27
78
Part
No.
Product
No.
T10-260-25
T10-370-25
T10-400-25
T10-410-25
T10-440-25
T10-450-25
T10-500-25
T10-530-25
T10-560-25
T10-600-25
T10-610-25
T10-630-25
T10-660-25
T10-690-25
T10-700-25
T10-720-25
T10-730-25
7762-2275
7762-2276
7762-2277
7762-2278
7762-2279
7762-2280
7762-2281
7762-2282
7762-2283
7762-2284
7762-2285
7762-2286
7762-2287
7762-2288
7762-2289
7762-2290
7762-2291
gates.com/pt
No. of
Teeth
26
37
40
41
44
45
50
53
56
60
61
63
66
69
70
72
73
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-1100-25
T10-1110-25
T10-1140-25
T10-1150-25
T10-1210-25
T10-1240-25
T10-1250-25
T10-1300-25
T10-1320-25
T10-1350-25
T10-1390-25
T10-1400-25
T10-1420-25
7762-2306
7762-2307
7762-2308
7762-2309
7762-2310
7762-2311
7762-2312
7762-2313
7762-2314
7762-2315
7762-2316
7762-2317
7762-2318
110
111
114
115
121
124
125
130
132
135
139
140
142
1100
1110
1140
1150
1210
1240
1250
1300
1320
1350
1390
1400
1420
.28
.28
.29
.29
.30
.31
.31
.33
.33
.34
.35
.35
.36
T10-1450-25
T10-1460-25
T10-1500-25
T10-1560-25
T10-1600-25
T10-1610-25
T10-1700-25
T10-1750-25
T10-1780-25
T10-1880-25
T10-1960-25
T10-2250-25
7762-2319
7762-2320
7762-2321
7762-2322
7762-0621
7762-2323
7762-0598
7762-2324
7762-2325
7762-2326
7762-2327
7762-2328
145
146
150
156
160
161
170
175
178
188
196
225
1450
1460
1500
1560
1600
1610
1700
1750
1780
1880
1960
2250
.36
.37
.38
.39
.40
.40
.24
.44
.45
.47
.49
.56
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
260
370
400
410
440
450
500
530
560
600
610
630
660
690
700
720
730
750
780
800
810
840
880
890
900
910
920
950
960
970
.08
.12
.13
.13
.14
.14
.16
.17
.18
.19
.20
.20
.21
.22
.22
.23
.23
.24
.25
.25
.26
.27
.28
.29
.29
.29
.30
.30
.31
.31
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
260
370
400
410
440
450
500
530
.13
.19
.20
.21
.22
.23
.25
.27
T10-560-50
T10-600-50
T10-610-50
T10-630-50
T10-660-50
T10-690-50
T10-700-50
T10-720-50
7762-2393
7762-2394
7762-2395
7762-2396
7762-2397
7762-2398
7762-2399
7762-2400
Part
No.
Product
No.
T10-260-32
T10-370-32
T10-400-32
T10-410-32
T10-440-32
T10-450-32
T10-500-32
T10-530-32
T10-560-32
T10-600-32
T10-610-32
T10-630-32
T10-660-32
T10-690-32
T10-700-32
T10-720-32
T10-730-32
T10-750-32
T10-780-32
T10-800-32
T10-810-32
T10-840-32
T10-880-32
T10-890-32
T10-900-32
T10-910-32
T10-920-32
T10-950-32
T10-960-32
T10-970-32
7762-2330
7762-2331
7762-2332
7762-2333
7762-2334
7762-2335
7762-2336
7762-2337
7762-2338
7762-2339
7762-2340
7762-2341
7762-2342
7762-2343
7762-2344
7762-2345
7762-2346
7762-2347
7762-2348
7762-0332
7762-2349
7762-2350
7762-2351
7762-2352
7762-2353
7762-2354
7762-2355
7762-0345
7762-2356
7762-2357
26
37
40
41
44
45
50
53
56
60
61
63
66
69
70
72
73
75
78
80
81
84
88
89
90
91
92
95
96
97
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-980-32
T10-1000-32
T10-1010-32
T10-1080-32
T10-1100-32
T10-1110-32
T10-1140-32
T10-1150-32
T10-1210-32
T10-1240-32
T10-1250-32
T10-1300-32
T10-1320-32
T10-1350-32
T10-1390-32
T10-1400-32
T10-1420-32
T10-1450-32
T10-1460-32
T10-1500-32
T10-1560-32
T10-1600-32
T10-1610-32
T10-1700-32
T10-1750-32
T10-1780-32
T10-1880-32
T10-1960-32
T10-2250-32
7762-2358
7762-0358
7762-2359
7762-2360
7762-2361
7762-2362
7762-2363
7762-2364
7762-2365
7762-2366
7762-2367
7762-2368
7762-2369
7762-2370
7762-2371
7762-2372
7762-2373
7762-2374
7762-2375
7762-2376
7762-2377
7762-0622
7762-2378
7762-0599
7762-2379
7762-2380
7762-2381
7762-2382
7762-2383
98
100
101
108
110
111
114
115
121
124
125
130
132
135
139
140
142
145
146
150
156
160
161
170
175
178
188
196
225
980
1000
1010
1080
1100
1110
1140
1150
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1560
1600
1610
1700
1750
1780
1880
1960
2250
.31
.30
.32
.35
.35
.36
.37
.37
.39
.40
.40
.42
.42
.43
.45
.45
.46
.47
.47
.48
.50
.52
.52
.33
.56
.57
.60
.63
.72
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
560
600
610
630
660
690
700
720
.28
.30
.31
.32
.33
.35
.35
.36
Part
No.
Product
No.
T10-260-50
T10-370-50
T10-400-50
T10-410-50
T10-440-50
T10-450-50
T10-500-50
T10-530-50
7762-2385
7762-2386
7762-2387
7762-2388
7762-2389
7762-2390
7762-2391
7762-2392
®
Powering Progress.
No. of
Teeth
26
37
40
41
44
45
50
53
No. of
Teeth
56
60
61
63
66
69
70
72
gates.com/pt
79
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-730-50
T10-750-50
T10-780-50
T10-800-50
T10-810-50
T10-840-50
T10-880-50
T10-890-50
T10-900-50
T10-910-50
T10-920-50
T10-950-50
T10-960-50
T10-970-50
T10-980-50
T10-1000-50
T10-1010-50
T10-1080-50
T10-1100-50
T10-1110-50
T10-1140-50
T10-1150-50
7762-2401
7762-2402
7762-2403
7762-0333
7762-2404
7762-2405
7762-2406
7762-2407
7762-2408
7762-2409
7762-2410
7762-0346
7762-2411
7762-2412
7762-2413
7762-0359
7762-2414
7762-2415
7762-2416
7762-2417
7762-2418
7762-2419
73
75
78
80
81
84
88
89
90
91
92
95
96
97
98
100
101
108
110
111
114
115
730
750
780
800
810
840
880
890
900
910
920
950
960
970
980
1000
1010
1080
1100
1110
1140
1150
.37
.38
.39
.17
.41
.42
.44
.45
.45
.46
.46
.50
.48
.49
.49
.55
.51
.54
.55
.56
.57
.58
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
260
370
400
410
440
450
500
530
560
600
610
630
660
690
700
720
730
750
780
800
810
840
880
890
900
910
920
950
960
970
.20
.28
.30
.31
.33
.34
.38
.40
.42
.45
.46
.47
.50
.52
.53
.54
.55
.56
.59
.60
.61
.63
.66
.67
.68
.69
.69
.71
.72
.73
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-1210-50
T10-1240-50
T10-1250-50
T10-1300-50
T10-1320-50
T10-1350-50
T10-1390-50
T10-1400-50
T10-1420-50
T10-1450-50
T10-1460-50
T10-1500-50
T10-1560-50
T10-1600-50
T10-1610-50
T10-1700-50
T10-1750-50
T10-1780-50
T10-1880-50
T10-1960-50
T10-2250-50
7762-2420
7762-2421
7762-2422
7762-2423
7762-2424
7762-2425
7762-2426
7762-2427
7762-2428
7762-2429
7762-2430
7762-2431
7762-2432
7762-0623
7762-2433
7762-0600
7762-2434
7762-2435
7762-2436
7762-2437
7762-2438
121
124
125
130
132
135
139
140
142
145
146
150
156
160
161
170
175
178
188
196
225
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1560
1600
1610
1700
1750
1780
1880
1960
2250
.61
.62
.63
.65
.66
.68
.70
.70
.71
.73
.73
.75
.78
.81
.81
.50
.88
.89
.94
.98
1.13
80
Part
No.
Product
No.
T10-260-75
T10-370-75
T10-400-75
T10-410-75
T10-440-75
T10-450-75
T10-500-75
T10-530-75
T10-560-75
T10-600-75
T10-610-75
T10-630-75
T10-660-75
T10-690-75
T10-700-75
T10-720-75
T10-730-75
T10-750-75
T10-780-75
T10-800-75
T10-810-75
T10-840-75
T10-880-75
T10-890-75
T10-900-75
T10-910-75
T10-920-75
T10-950-75
T10-960-75
T10-970-75
7762-2450
7762-2451
7762-2452
7762-2453
7762-2454
7762-2455
7762-2456
7762-2457
7762-2458
7762-2459
7762-2460
7762-2461
7762-2462
7762-2463
7762-2464
7762-2465
7762-2466
7762-2467
7762-2468
7762-0334
7762-2469
7762-2470
7762-2471
7762-2472
7762-2473
7762-2474
7762-2475
7762-0347
7762-2476
7762-2477
gates.com/pt
26
37
40
41
44
45
50
53
56
60
61
63
66
69
70
72
73
75
78
80
81
84
88
89
90
91
92
95
96
97
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-980-75
T10-1000-75
T10-1010-75
T10-1080-75
T10-1100-75
T10-1110-75
T10-1140-75
T10-1150-75
T10-1210-75
T10-1240-75
T10-1250-75
T10-1300-75
T10-1320-75
T10-1350-75
T10-1390-75
T10-1400-75
T10-1420-75
T10-1450-75
T10-1460-75
T10-1500-75
T10-1560-75
T10-1600-75
T10-1610-75
T10-1700-75
T10-1750-75
T10-1780-75
T10-1880-75
T10-1960-75
T10-2250-75
7762-2478
7762-0360
7762-2479
7762-2480
7762-2481
7762-2482
7762-2483
7762-2484
7762-2485
7762-2486
7762-2487
7762-2488
7762-2489
7762-2490
7762-2491
7762-2492
7762-2493
7762-2494
7762-2495
7762-2496
7762-2497
7762-0624
7762-2498
7762-0601
7762-2499
7762-2500
7762-2501
7762-2502
7762-2503
98
100
101
108
110
111
114
115
121
124
125
130
132
135
139
140
142
145
146
150
156
160
161
170
175
178
188
196
225
980
1000
1010
1080
1100
1110
1140
1150
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1560
1600
1610
1700
1750
1780
1880
1960
2250
.74
.75
.76
.81
.83
.84
.86
.87
.91
.93
.94
.98
.99
1.02
1.05
1.05
1.07
1.09
1.10
1.13
1.17
1.21
1.21
1.26
1.32
1.34
1.42
1.48
1.69
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
T10-260-100
T10-370-100
T10-400-100
T10-410-100
T10-440-100
T10-450-100
T10-500-100
T10-530-100
T10-560-100
T10-600-100
T10-610-100
T10-630-100
T10-660-100
T10-690-100
T10-700-100
T10-720-100
T10-730-100
T10-750-100
T10-780-100
T10-800-100
T10-810-100
T10-840-100
T10-880-100
T10-890-100
T10-900-100
T10-910-100
T10-920-100
T10-950-100
T10-960-100
T10-970-100
7762-2505
7762-2506
7762-2507
7762-2508
7762-2509
7762-2510
7762-2511
7762-2512
7762-2513
7762-2514
7762-2515
7762-2516
7762-2517
7762-2518
7762-2519
7762-2520
7762-2521
7762-2522
7762-2523
7762-0335
7762-2524
7762-2525
7762-2526
7762-2527
7762-2528
7762-2529
7762-2530
7762-0348
7762-2531
7762-2532
No. of
Teeth
26
37
40
41
44
45
50
43
56
60
61
63
66
69
70
72
73
75
78
80
81
84
88
89
90
91
92
95
96
97
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
260
370
400
410
440
450
500
530
560
600
610
630
660
690
700
720
730
750
780
800
810
840
880
890
900
910
920
950
960
970
.52
.74
.80
.82
.88
.90
1.00
1.06
1.12
1.20
1.22
1.26
1.33
1.39
1.41
1.45
1.47
1.51
1.57
.79
1.63
1.69
1.77
1.79
1.81
1.83
1.85
1.00
1.93
1.95
T10-980-100
T10-1000-100
T10-1010-100
T10-1080-100
T10-1100-100
T10-1110-100
T10-1140-100
T10-1150-100
T10-1210-100
T10-1240-100
T10-1250-100
T10-1300-100
T10-1320-100
T10-1350-100
T10-1390-100
T10-1400-100
T10-1420-100
T10-1450-100
T10-1460-100
T10-1500-100
T10-1560-100
T10-1600-100
T10-1610-100
T10-1700-100
T10-1750-100
T10-1780-100
T10-1880-100
T10-1960-100
T10-2250-100
7762-2533
7762-0361
7762-2534
7762-2535
7762-2536
7762-2537
7762-2538
7762-2539
7762-2540
7762-2541
7762-2542
7762-2543
7762-2544
7762-2545
7762-2546
7762-2547
7762-2548
7762-2549
7762-2550
7762-2551
7762-2552
7762-0625
7762-2553
7762-0602
7762-2554
7762-2555
7762-2556
7762-2557
7762-2558
98
100
101
108
110
111
114
115
121
124
125
130
132
135
139
140
142
145
146
150
156
160
161
170
175
178
188
196
225
980
1000
1010
1080
1100
1110
1140
1150
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1560
1600
1610
1700
1750
1780
1880
1960
2250
1.97
1.10
2.03
2.17
2.21
2.23
2.29
2.31
2.43
1.24
1.25
1.31
1.33
1.36
1.40
1.41
1.43
1.46
1.47
1.51
1.57
1.62
1.62
1.00
1.76
1.79
1.89
1.97
2.26
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
260
370
400
410
440
450
500
530
560
600
610
630
660
690
700
720
730
750
780
800
810
840
880
890
900
910
.52
.74
.80
.82
.88
.90
1.00
1.06
1.12
1.20
1.22
1.26
1.33
1.39
1.41
1.45
1.47
1.51
1.57
1.61
1.63
1.69
1.77
1.79
1.81
1.83
T10-920-200
T10-950-200
T10-960-200
T10-970-200
T10-980-200
T10-1000-200
T10-1010-200
T10-1080-200
T10-1100-200
T10-1110-200
T10-1140-200
T10-1150-200
T10-1210-200
T10-1240-200
T10-1250-200
T10-1300-200
T10-1320-200
T10-1350-200
T10-1390-200
T10-1400-200
T10-1420-200
T10-1450-200
T10-1460-200
T10-1500-200
T10-1560-200
T10-1600-200
7762-2585
7762-0349
7762-2586
7762-2587
7762-2588
7762-0362
7762-2589
7762-2590
7762-2591
7762-2592
7762-2593
7762-2594
7762-2595
7762-2596
7762-2597
7762-2598
7762-2599
7762-2600
7762-2601
7762-2602
7762-2603
7762-2604
7762-2605
7762-2606
7762-2607
7762-0626
92
95
96
97
98
100
101
108
110
111
114
115
121
124
125
130
132
135
139
140
142
145
146
150
156
160
920
950
960
970
980
1000
1010
1080
1100
1110
1140
1150
1210
1240
1250
1300
1320
1350
1390
1400
1420
1450
1460
1500
1560
1600
1.85
1.91
1.93
1.95
1.97
1.97
2.03
2.17
2.21
2.23
2.29
2.31
2.43
2.49
2.51
2.61
2.65
2.71
2.79
2.81
2.85
2.91
2.93
3.01
3.13
3.23
Part
No.
Product
No.
T10-260-200
T10-370-200
T10-400-200
T10-410-200
T10-440-200
T10-450-200
T10-500-200
T10-530-200
T10-560-200
T10-600-200
T10-610-200
T10-630-200
T10-660-200
T10-690-200
T10-700-200
T10-720-200
T10-730-200
T10-750-200
T10-780-200
T10-800-200
T10-810-200
T10-840-200
T10-880-200
T10-890-200
T10-900-200
T10-910-200
7762-2560
7762-2561
7762-2562
7762-2563
7762-2564
7762-2565
7762-2566
7762-2567
7762-2568
7762-2569
7762-2570
7762-2571
7762-2572
7762-2573
7762-2574
7762-2575
7762-2576
7762-2577
7762-2578
7762-0336
7762-2579
7762-2580
7762-2581
7762-2582
7762-2583
7762-2584
®
Powering Progress.
No. of
Teeth
26
37
40
41
44
45
50
53
56
60
61
63
66
69
70
72
73
75
78
80
81
84
88
89
90
91
gates.com/pt
81
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-1610-200
T10-1700-200
T10-1750-200
T10-1780-200
7762-2608
7762-0603
7762-2609
7762-2610
161
170
175
178
1610
1700
1750
1780
3.23
3.33
3.51
3.57
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
T10-1880-200
T10-1960-200
T10-2250-200
7762-2611
7762-2612
7762-2613
188
196
225
1880
1960
2250
3.77
3.94
4.52
AT5 Pitch — 4mm Wide
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-4
AT5-275-4
AT5-280-4
AT5-300-4
AT5-340-4
AT5-375-4
AT5-390-4
AT5-420-4
AT5-455-4
AT5-500-4
AT5-545-4
AT5-600-4
7762-3001
7762-3002
7762-3003
7762-3004
7762-3005
7762-3006
7762-3007
7762-3008
7762-3009
7762-3010
7762-3011
7762-3012
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.01
.01
.01
.01
.01
.01
.01
.01
.01
.02
.02
.02
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-4
AT5-630-4
AT5-660-4
AT5-720-4
AT5-750-4
AT5-780-4
AT5-825-4
AT5-975-4
AT5-1050-4
AT5-1125-4
AT5-1500-4
7762-3013
7762-3014
7762-3015
7762-3016
7762-3017
7762-3018
7762-3019
7762-3020
7762-3021
7762-3022
7762-3311
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.04
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-6
AT5-630-6
AT5-660-6
AT5-720-6
AT5-750-6
AT5-780-6
AT5-825-6
AT5-975-6
AT5-1050-6
AT5-1125-6
AT5-1500-6
7762-3037
7762-3038
7762-3039
7762-3040
7762-3041
7762-3042
7762-3043
7762-3044
7762-3045
7762-3046
7762-3312
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.03
.03
.03
.03
.03
.04
.04
.04
.05
.05
.06
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-8
AT5-630-8
AT5-660-8
AT5-720-8
AT5-750-8
AT5-780-8
AT5-825-8
AT5-975-8
AT5-1050-8
AT5-1125-8
AT5-1500-8
7762-3061
7762-3062
7762-3063
7762-3064
7762-3065
7762-3066
7762-3067
7762-3068
7762-3069
7762-3070
7762-3313
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.04
.04
.04
.04
.05
.05
.05
.06
.06
.07
.09
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-6
AT5-275-6
AT5-280-6
AT5-300-6
AT5-340-6
AT5-375-6
AT5-390-6
AT5-420-6
AT5-455-6
AT5-500-6
AT5-545-6
AT5-600-6
7762-3025
7762-3026
7762-3027
7762-3028
7762-3029
7762-3030
7762-3031
7762-3032
7762-3033
7762-3034
7762-3035
7762-3036
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.01
.01
.01
.01
.02
.02
.02
.02
.02
.02
.02
.03
82
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-8
AT5-275-8
AT5-280-8
AT5-300-8
AT5-340-8
AT5-375-8
AT5-390-8
AT5-420-8
AT5-455-8
AT5-500-8
AT5-545-8
AT5-600-8
7762-3049
7762-3050
7762-3051
7762-3052
7762-3053
7762-3054
7762-3055
7762-3056
7762-3057
7762-3058
7762-3059
7762-3060
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.02
.02
.02
.02
.02
.02
.02
.03
.03
.03
.03
.04
gates.com/pt
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-10
AT5-275-10
AT5-280-10
AT5-300-10
AT5-340-10
AT5-375-10
AT5-390-10
AT5-420-10
AT5-455-10
AT5-500-10
AT5-545-10
AT5-600-10
7762-3073
7762-3074
7762-3075
7762-3076
7762-3077
7762-3078
7762-3079
7762-3080
7762-3081
7762-3082
7762-3083
7762-3084
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.02
.02
.02
.02
.03
.03
.03
.03
.03
.04
.04
.05
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-10
AT5-630-10
AT5-660-10
AT5-720-10
AT5-750-10
AT5-780-10
AT5-825-10
AT5-975-10
AT5-1050-10
AT5-1125-10
AT5-1500-10
7762-3085
7762-3086
7762-3087
7762-3088
7762-3089
7762-3090
7762-3091
7762-3092
7762-3093
7762-3094
7762-3314
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.05
.05
.05
.05
.06
.06
.06
.07
.08
.09
.11
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-12
AT5-630-12
AT5-660-12
AT5-720-12
AT5-750-12
AT5-780-12
AT5-825-12
AT5-975-12
AT5-1050-12
AT5-1125-12
AT5-1500-12
7762-3109
7762-3110
7762-3111
7762-3112
7762-3113
7762-3114
7762-3115
7762-3116
7762-3117
7762-3118
7762-3315
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.06
.06
.06
.07
.07
.07
.07
.09
.10
.10
.13
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-16
AT5-630-16
AT5-660-16
AT5-720-16
AT5-750-16
AT5-780-16
AT5-825-16
AT5-975-16
AT5-1050-16
AT5-1125-16
AT5-1500-16
7762-3133
7762-3134
7762-3135
7762-3136
7762-3137
7762-3138
7762-3139
7762-3140
7762-3141
7762-3142
7762-3316
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.07
.08
.08
.09
.09
.09
.10
.12
.13
.14
.18
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-12
AT5-275-12
AT5-280-12
AT5-300-12
AT5-340-12
AT5-375-12
AT5-390-12
AT5-420-12
AT5-455-12
AT5-500-12
AT5-545-12
AT5-600-12
7762-3097
7762-3098
7762-3099
7762-3100
7762-3101
7762-3102
7762-3103
7762-3104
7762-3105
7762-3106
7762-3107
7762-3108
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.02
.02
.03
.03
.03
.03
.04
.04
.04
.05
.05
.05
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-16
AT5-275-16
AT5-280-16
AT5-300-16
AT5-340-16
AT5-375-16
AT5-390-16
AT5-420-16
AT5-455-16
AT5-500-16
AT5-545-16
AT5-600-16
7762-3121
7762-3122
7762-3123
7762-3124
7762-3125
7762-3126
7762-3127
7762-3128
7762-3129
7762-3130
7762-3131
7762-3132
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.03
.03
.03
.04
.04
.05
.05
.05
.06
.06
.07
.07
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
255
275
280
300
340
375
390
420
455
.04
.04
.04
.05
.05
.06
.06
.06
.07
AT5-500-20
AT5-545-20
AT5-600-20
AT5-610-20
AT5-630-20
AT5-660-20
AT5-720-20
AT5-750-20
AT5-780-20
7762-3154
7762-3155
7762-3156
7762-3157
7762-3158
7762-3159
7762-3160
7762-3161
7762-3162
100
109
120
122
126
132
144
150
156
500
545
600
610
630
660
720
750
780
.08
.08
.09
.09
.10
.10
.11
.11
.12
Part
No.
Product
No.
AT5-255-20
AT5-275-20
AT5-280-20
AT5-300-20
AT5-340-20
AT5-375-20
AT5-390-20
AT5-420-20
AT5-455-20
7762-3145
7762-3146
7762-3147
7762-3148
7762-3149
7762-3150
7762-3151
7762-3152
7762-3153
®
Powering Progress.
51
55
56
60
68
75
78
84
91
gates.com/pt
83
June 2012
SYNCHRO-POWER BELTS
AT5 Pitch — 20mm Wide (continued)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-825-20
AT5-975-20
AT5-1050-20
7762-3163
7762-3164
7762-3165
165
195
210
825
975
1050
.12
.15
.16
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-1125-20
AT5-1500-20
7762-3166
7762-3317
225
300
1125
1500
.17
.22
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-25
AT5-630-25
AT5-660-25
AT5-720-25
AT5-750-25
AT5-780-25
AT5-825-25
AT5-975-25
AT5-1050-25
AT5-1125-25
AT5-1500-25
7762-3181
7762-3182
7762-3183
7762-3184
7762-3185
7762-3186
7762-3187
7762-3188
7762-3189
7762-3190
7762-3318
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.12
.12
.12
.14
.14
.15
.16
.18
.20
.21
.28
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-32
AT5-630-32
AT5-660-32
AT5-720-32
AT5-750-32
AT5-780-32
AT5-825-32
AT5-975-32
AT5-1050-32
AT5-1125-32
AT5-1500-32
7762-3205
7762-3206
7762-3207
7762-3208
7762-3209
7762-3210
7762-3211
7762-3212
7762-3213
7762-3214
7762-3319
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.12
.12
.12
.14
.14
.15
.16
.18
.20
.21
.28
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-720-50
AT5-750-50
AT5-780-50
AT5-825-50
AT5-975-50
AT5-1050-50
AT5-1125-50
AT5-1500-50
7762-3232
7762-3233
7762-3234
7762-3235
7762-3236
7762-3237
7762-3238
7762-3320
144
150
156
165
195
210
225
300
720
750
780
825
975
1050
1125
1500
.27
.28
.30
.31
.37
.40
.43
.56
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-25
AT5-275-25
AT5-280-25
AT5-300-25
AT5-340-25
AT5-375-25
AT5-390-25
AT5-420-25
AT5-455-25
AT5-500-25
AT5-545-25
AT5-600-25
7762-3169
7762-3170
7762-3171
7762-3172
7762-3173
7762-3174
7762-3175
7762-3176
7762-3177
7762-3178
7762-3179
7762-3180
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.05
.05
.05
.06
.06
.07
.07
.08
.09
.09
.10
.11
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-32
AT5-275-32
AT5-280-32
AT5-300-32
AT5-340-32
AT5-375-32
AT5-390-32
AT5-420-32
AT5-455-32
AT5-500-32
AT5-545-32
AT5-600-32
7762-3193
7762-3194
7762-3195
7762-3196
7762-3197
7762-3198
7762-3199
7762-3200
7762-3201
7762-3202
7762-3203
7762-3204
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.05
.05
.05
.06
.06
.07
.07
.08
.09
.09
.10
.11
84
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-50
AT5-275-50
AT5-280-50
AT5-300-50
AT5-340-50
AT5-375-50
AT5-390-50
AT5-420-50
AT5-455-50
AT5-500-50
AT5-545-50
AT5-600-50
AT5-610-50
AT5-630-50
AT5-660-50
7762-3217
7762-3218
7762-3219
7762-3220
7762-3221
7762-3222
7762-3223
7762-3224
7762-3225
7762-3226
7762-3227
7762-3228
7762-3229
7762-3230
7762-3231
51
55
56
60
68
75
78
84
91
100
109
120
122
126
132
255
275
280
300
340
375
390
420
455
500
545
600
610
630
660
.10
.10
.11
.11
.13
.14
.15
.16
.17
.19
.21
.23
.23
.24
.25
gates.com/pt
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-75
AT5-275-75
AT5-280-75
AT5-300-75
AT5-340-75
AT5-375-75
AT5-390-75
AT5-420-75
AT5-455-75
AT5-500-75
AT5-545-75
AT5-600-75
7762-3241
7762-3242
7762-3243
7762-3244
7762-3245
7762-3246
7762-3247
7762-3248
7762-3249
7762-3250
7762-3251
7762-3252
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.14
.16
.16
.17
.19
.21
.22
.24
.26
.28
.31
.34
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-75
AT5-630-75
AT5-660-75
AT5-720-75
AT5-750-75
AT5-780-75
AT5-825-75
AT5-975-75
AT5-1050-75
AT5-1125-75
AT5-1500-75
7762-3253
7762-3254
7762-3255
7762-3256
7762-3257
7762-3258
7762-3259
7762-3260
7762-3261
7762-3262
7762-3321
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.35
.36
.37
.41
.43
.44
.47
.55
.60
.64
.85
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-225-100
AT5-255-100
AT5-275-100
AT5-280-100
AT5-300-100
AT5-340-100
AT5-375-100
AT5-390-100
AT5-420-100
AT5-455-100
AT5-500-100
AT5-545-100
7762-3264
7762-3265
7762-3266
7762-3267
7762-3268
7762-3269
7762-3270
7762-3271
7762-3272
7762-3273
7762-3274
7762-3275
45
51
55
56
60
68
75
78
84
91
100
109
225
255
275
280
300
340
375
390
420
455
500
545
.17
.19
.21
.21
.23
.26
.28
.30
.32
.34
.38
.41
AT5-600-100
AT5-610-100
AT5-630-100
AT5-660-100
AT5-720-100
AT5-750-100
AT5-780-100
AT5-825-100
AT5-975-100
AT5-1050-100
AT5-1125-100
AT5-1500-100
7762-3276
7762-3277
7762-3278
7762-3279
7762-3280
7762-3281
7762-3282
7762-3283
7762-3284
7762-3285
7762-3286
7762-3322
120
122
126
132
144
150
156
165
195
210
225
300
600
610
630
660
720
750
780
825
975
1050
1125
1500
.45
.46
.48
.50
.55
.57
.59
.62
.74
.80
.85
1.13
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-610-200
AT5-630-200
AT5-660-200
AT5-720-200
AT5-750-200
AT5-780-200
AT5-825-200
AT5-975-200
AT5-1050-200
AT5-1125-200
AT5-1500-200
7762-3301
7762-3302
7762-3303
7762-3304
7762-3305
7762-3306
7762-3307
7762-3308
7762-3309
7762-3310
7762-3323
122
126
132
144
150
156
165
195
210
225
300
610
630
660
720
750
780
825
975
1050
1125
1500
.92
.95
1.00
1.09
1.14
1.18
1.25
1.48
1.59
1.70
2.27
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT5-255-200
AT5-275-200
AT5-280-200
AT5-300-200
AT5-340-200
AT5-375-200
AT5-390-200
AT5-420-200
AT5-455-200
AT5-500-200
AT5-545-200
AT5-600-200
7762-3289
7762-3290
7762-3291
7762-3292
7762-3293
7762-3294
7762-3295
7762-3296
7762-3297
7762-3298
7762-3299
7762-3300
51
55
56
60
68
75
78
84
91
100
109
120
255
275
280
300
340
375
390
420
455
500
545
600
.39
.42
.42
.45
.52
.57
.59
.64
.69
.76
.83
.91
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
500
560
610
660
700
730
780
800
810
.08
.08
.09
.10
.11
.11
.12
.12
.12
AT10-840-12
AT10-890-12
AT10-920-12
AT10-960-12
AT10-980-12
AT10-1010-12
AT10-1050-12
AT10-1080-12
AT10-1150-12
7762-4009
7762-4010
7762-4011
7762-4012
7762-4013
7762-4014
7762-4015
7762-4016
7762-4017
84
89
92
96
98
101
105
108
115
840
890
920
960
980
1010
1050
1080
1150
.13
.13
.14
.14
.15
.15
.16
.16
.17
Part
No.
Product
No.
AT10-500-12
AT10-560-12
AT10-610-12
AT10-660-12
AT10-700-12
AT10-730-12
AT10-780-12
AT10-800-12
AT10-810-12
7762-4000
7762-4001
7762-4002
7762-4003
7762-4004
7762-4005
7762-4006
7762-4007
7762-4008
®
Powering Progress.
50
56
61
66
70
73
78
80
81
gates.com/pt
85
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT10-1210-12
AT10-1250-12
AT10-1320-12
AT10-1400-12
7762-4018
7762-4019
7762-4020
7762-4021
121
125
132
140
1210
1250
1320
1400
.18
.19
.20
.21
AT10-1500-12
AT10-1600-12
AT10-1700-12
AT10-1800-12
7762-4022
7762-4023
7762-4024
7762-4226
150
160
170
180
1500
1600
1700
1800
.23
.24
.26
.27
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
500
560
610
660
700
730
780
800
810
840
890
920
960
.10
.11
.12
.13
.14
.15
.16
.16
.16
.17
.18
.18
.19
AT10-980-16
AT10-1010-16
AT10-1050-16
AT10-1080-16
AT10-1150-16
AT10-1210-16
AT10-1250-16
AT10-1320-16
AT10-1400-16
AT10-1500-16
AT10-1600-16
AT10-1700-16
AT10-1800-16
7762-4038
7762-4039
7762-4040
7762-4041
7762-4042
7762-4043
7762-4044
7762-4045
7762-4046
7762-4047
7762-4048
7762-4049
7762-4228
98
101
105
108
115
121
125
132
140
150
160
170
180
980
1010
1050
1080
1150
1210
1250
1320
1400
1500
1600
1700
1800
.20
.20
.21
.22
.23
.24
.25
.26
.28
.30
.32
.34
.36
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
500
560
610
660
700
730
780
800
810
840
890
920
960
.13
.14
.15
.17
.18
.18
.20
.20
.20
.21
.22
.23
.24
AT10-980-20
AT10-1010-20
AT10-1050-20
AT10-1080-20
AT10-1150-20
AT10-1210-20
AT10-1250-20
AT10-1320-20
AT10-1400-20
AT10-1500-20
AT10-1600-20
AT10-1700-20
AT10-1800-20
7762-4063
7762-4064
7762-4065
7762-4066
7762-4067
7762-4068
7762-4069
7762-4070
7762-4071
7762-4072
7762-4073
7762-4074
7762-4230
98
101
105
108
115
121
125
132
140
150
160
170
180
980
1010
1050
1080
1150
1210
1250
1320
1400
1500
1600
1700
1800
.25
.25
.26
.27
.29
.30
.31
.33
.35
.38
.40
.43
.45
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
500
560
610
660
700
730
780
800
810
840
890
920
960
.16
.18
.19
.21
.22
.23
.24
.25
.25
.26
.28
.29
.30
AT10-980-25
AT10-1010-25
AT10-1050-25
AT10-1080-25
AT10-1150-25
AT10-1210-25
AT10-1250-25
AT10-1320-25
AT10-1400-25
AT10-1500-25
AT10-1600-25
AT10-1700-25
AT10-1800-25
7762-4088
7762-4089
7762-4090
7762-4091
7762-4092
7762-4093
7762-4094
7762-4095
7762-4096
7762-4097
7762-4098
7762-4099
7762-4242
98
101
105
108
115
121
125
132
140
150
160
170
180
980
1010
1050
1080
1150
1210
1250
1320
1400
1500
1600
1700
1800
.31
.32
.33
.34
.36
.38
.39
.41
.44
.47
.50
.53
.56
Part
No.
Product
No.
AT10-500-16
AT10-560-16
AT10-610-16
AT10-660-16
AT10-700-16
AT10-730-16
AT10-780-16
AT10-800-16
AT10-810-16
AT10-840-16
AT10-890-16
AT10-920-16
AT10-960-16
7762-4025
7762-4026
7762-4027
7762-4028
7762-4029
7762-4030
7762-4031
7762-4032
7762-4033
7762-4034
7762-4035
7762-4036
7762-4037
50
56
61
66
70
73
78
80
81
84
89
92
96
Part
No.
Product
No.
AT10-500-20
AT10-560-20
AT10-610-20
AT10-660-20
AT10-700-20
AT10-730-20
AT10-780-20
AT10-800-20
AT10-810-20
AT10-840-20
AT10-890-20
AT10-920-20
AT10-960-20
7762-4050
7762-4051
7762-4052
7762-4053
7762-4054
7762-4055
7762-4056
7762-4057
7762-4058
7762-4059
7762-4060
7762-4061
7762-4062
No. of
Teeth
50
56
61
66
70
73
78
80
81
84
89
92
96
86
Part
No.
Product
No.
AT10-500-25
AT10-560-25
AT10-610-25
AT10-660-25
AT10-700-25
AT10-730-25
AT10-780-25
AT10-800-25
AT10-810-25
AT10-840-25
AT10-890-25
AT10-920-25
AT10-960-25
7762-4075
7762-4076
7762-4077
7762-4078
7762-4079
7762-4080
7762-4081
7762-4082
7762-4083
7762-4084
7762-4085
7762-4086
7762-4087
gates.com/pt
No. of
Teeth
50
56
61
66
70
73
78
80
81
84
89
92
96
Gates Corporation
®
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
AT10-500-32
AT10-560-32
AT10-610-32
AT10-660-32
AT10-700-32
AT10-730-32
AT10-780-32
AT10-800-32
AT10-810-32
AT10-840-32
AT10-890-32
AT10-920-32
AT10-960-32
7762-4100
7762-4101
7762-4102
7762-4103
7762-4104
7762-4105
7762-4106
7762-4107
7762-4108
7762-4109
7762-4110
7762-4111
7762-4112
No. of
Teeth
50
56
61
66
70
73
78
80
81
84
89
92
96
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
500
560
610
660
700
730
780
800
810
840
890
920
960
.20
.22
.24
.26
.28
.29
.31
.32
.33
.34
.36
.37
.39
AT10-980-32
AT10-1010-32
AT10-1050-32
AT10-1080-32
AT10-1150-32
AT10-1210-32
AT10-1250-32
AT10-1320-32
AT10-1400-32
AT10-1500-32
AT10-1600-32
AT10-1700-32
AT10-1800-32
7762-4113
7762-4114
7762-4115
7762-4116
7762-4117
7762-4118
7762-4119
7762-4120
7762-4121
7762-4122
7762-4123
7762-4124
7762-4233
98
101
105
108
115
121
125
132
140
150
160
170
180
980
1010
1050
1080
1150
1210
1250
1320
1400
1500
1600
1700
1800
.39
.41
.42
.43
.46
.49
.50
.53
.56
.60
.64
.68
.72
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
500
560
610
660
700
730
780
800
810
840
890
920
960
.31
.35
.38
.41
.44
.46
.49
.50
.51
.53
.56
.58
.60
AT10-980-50
AT10-1010-50
AT10-1050-50
AT10-1080-50
AT10-1150-50
AT10-1210-50
AT10-1250-50
AT10-1320-50
AT10-1400-50
AT10-1500-50
AT10-1600-50
AT10-1700-50
AT10-1800-50
7762-4138
7762-4139
7762-4140
7762-4141
7762-4142
7762-4143
7762-4144
7762-4145
7762-4146
7762-4147
7762-4148
7762-4149
7762-4235
98
101
105
108
115
121
125
132
140
150
160
170
180
980
1010
1050
1080
1150
1210
1250
1320
1400
1500
1600
1700
1800
.61
.63
.66
.68
.72
.76
.78
.83
.88
.94
1.00
1.07
1.12
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
500
560
610
660
700
730
780
800
810
840
890
920
960
.47
.53
.57
.62
.66
.69
.73
.75
.76
.79
.84
.87
.90
AT10-980-75
AT10-1010-75
AT10-1050-75
AT10-1080-75
AT10-1150-75
AT10-1210-75
AT10-1250-75
AT10-1320-75
AT10-1400-75
AT10-1500-75
AT10-1600-75
AT10-1700-75
AT10-1800-75
7762-4163
7762-4164
7762-4165
7762-4166
7762-4167
7762-4168
7762-4169
7762-4170
7762-4171
7762-4172
7762-4173
7762-4174
7762-4237
98
101
105
108
115
121
125
132
140
150
160
170
180
980
1010
1050
1080
1150
1210
1250
1320
1400
1500
1600
1700
1800
.92
.95
.99
1.02
1.08
1.14
1.18
1.24
1.32
1.41
1.51
1.60
1.69
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
500
560
610
660
700
730
.63
.70
.77
.83
.88
.92
AT10-780-100
AT10-800-100
AT10-810-100
AT10-840-100
AT10-890-100
AT10-920-100
7762-4181
7762-4182
7762-4183
7762-4184
7762-4185
7762-4186
780
800
810
840
890
920
.98
1.00
1.02
1.05
1.12
1.15
Part
No.
Product
No.
AT10-500-50
AT10-560-50
AT10-610-50
AT10-660-50
AT10-700-50
AT10-730-50
AT10-780-50
AT10-800-50
AT10-810-50
AT10-840-50
AT10-890-50
AT10-920-50
AT10-960-50
7762-4125
7762-4126
7762-4127
7762-4128
7762-4129
7762-4130
7762-4131
7762-4132
7762-4133
7762-4134
7762-4135
7762-4136
7762-4137
No. of
Teeth
50
56
61
66
70
73
78
80
81
84
89
92
96
Part
No.
Product
No.
AT10-500-75
AT10-560-75
AT10-610-75
AT10-660-75
AT10-700-75
AT10-730-75
AT10-780-75
AT10-800-75
AT10-810-75
AT10-840-75
AT10-890-75
AT10-920-75
AT10-960-75
7762-4150
7762-4151
7762-4152
7762-4153
7762-4154
7762-4155
7762-4156
7762-4157
7762-4158
7762-4159
7762-4160
7762-4161
7762-4162
No. of
Teeth
50
56
61
66
70
73
78
80
81
84
89
92
96
Part
No.
Product
No.
AT10-500-100
AT10-560-100
AT10-610-100
AT10-660-100
AT10-700-100
AT10-730-100
7762-4175
7762-4176
7762-4177
7762-4178
7762-4179
7762-4180
®
Powering Progress.
No. of
Teeth
50
56
61
66
70
73
78
80
81
84
89
92
gates.com/pt
87
June 2012
SYNCHRO-POWER BELTS
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
AT10-960-100
AT10-980-100
AT10-1010-100
AT10-1050-100
AT10-1080-100
AT10-1150-100
AT10-1210-100
7762-4187
7762-4188
7762-4189
7762-4190
7762-4191
7762-4192
7762-4193
96
98
101
105
108
115
121
960
980
1010
1050
1080
1150
1210
1.20
1.23
1.27
1.32
1.35
1.44
1.52
AT10-1250-100
AT10-1320-100
AT10-1400-100
AT10-1500-100
AT10-1600-100
AT10-1700-100
AT10-1800-100
7762-4194
7762-4195
7762-4196
7762-4197
7762-4198
7762-4199
7762-4239
125
132
140
150
160
170
180
1250
1320
1400
1500
1600
1700
1800
1.57
1.66
1.76
1.88
2.01
2.13
2.25
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(mm)
Wt.
Ea.
(Lbs.)
500
560
610
660
700
730
780
800
810
840
890
920
960
1.25
1.41
1.53
1.66
1.76
1.83
1.96
2.01
2.03
2.11
2.23
2.31
2.41
AT10-980-200
AT10-1010-200
AT10-1050-200
AT10-1080-200
AT10-1150-200
AT10-1210-200
AT10-1250-200
AT10-1320-200
AT10-1400-200
AT10-1500-200
AT10-1600-200
AT10-1700-200
AT10-1800-200
7762-4213
7762-4214
7762-4215
7762-4216
7762-4217
7762-4218
7762-4219
7762-4220
7762-4221
7762-4222
7762-4223
7762-4224
7762-4241
98
101
105
108
115
121
125
132
140
150
160
170
180
980
1010
1050
1080
1150
1210
1250
1320
1400
1500
1600
1700
1800
2.46
2.53
2.63
2.71
2.89
3.04
3.14
3.31
3.51
3.76
4.01
4.27
4.51
88
Part
No.
Product
No.
AT10-500-200
AT10-560-200
AT10-610-200
AT10-660-200
AT10-700-200
AT10-730-200
AT10-780-200
AT10-800-200
AT10-810-200
AT10-840-200
AT10-890-200
AT10-920-200
AT10-960-200
7762-4200
7762-4201
7762-4202
7762-4203
7762-4204
7762-4205
7762-4206
7762-4207
7762-4208
7762-4209
7762-4210
7762-4211
7762-4212
gates.com/pt
50
56
61
66
70
73
78
80
81
84
89
92
96
Gates Corporation
®
June 2012
Made-to-Order T2.5 Pitch*
Part
No.
1
1
T2.5-120
T2.5-145
T2.5-160
T2.5-177.5
T2.5-180
T2.5-182.5
T2.5-200
T2.5-210
T2.5-230
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
48
58
64
71
72
73
80
84
92
120
145
160
177.5
180
182.5
200
210
230
T2.5-245
T2.5-265
T2.5-277.5
T2.5-285
T2.5-290
T2.5-305
T2.5-317.5
T2.5-330
T2.5-342.5
98
106
111
114
116
122
127
132
137
245
265
277.5
285
290
305
317.5
330
342.5
T2.5-380
T2.5-420
T2.5-480
T2.5-500
T2.5-540
T2.5-600
T2.5-620
T2.5-650
T2.5-680
152
168
192
200
216
240
248
260
272
380
420
480
500
540
600
620
650
680
Part
No.
No. of
Teeth
Pitch
Length
(mm)
T2.5-700
T2.5-780
T2.5-880
T2.5-915
T2.5-950
T2.5-1185
280
312
352
366
380
474
700
780
880
915
950
1185
Made-to-Order T5 Pitch*
Part
No.
1
No. of
Teeth
T5-120
T5-210
T5-300
T5-375
T5-425
T5-440
24
42
60
75
85
88
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
120
210
300
375
425
440
T5-460
T5-515
T5-765
T5-830
T5-860
T5-885
92
103
153
166
172
177
460
515
765
830
860
885
T5-920
T5-1160
T5-1200
T5-1275
T5-1280
T5-1355
184
232
240
255
256
271
920
1160
1200
1275
1280
1355
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
320
340
390
480
T10-550
T10-650
T10-680
T10-850
550
650
680
850
T10-1050
T10-1200
T10-1440
T10-1600
105
120
144
160
1050
1200
1440
1600
Part
No.
No. of
Teeth
Pitch
Length
(mm)
T5-1440
T5-1470
T5-1500
T5-1580
T5-1955
288
294
300
316
391
1440
1470
1500
1580
1955
Part
No.
No. of
Teeth
Pitch
Length
(mm)
T10-1700
170
1700
Part
No.
No. of
Teeth
Pitch
Length
(mm)
AT10-1630
AT10-1720
AT10-1860
AT10-1940
163
172
186
194
1630
1720
1860
1940
Made-to-Order T10 Pitch*
Part
No.
No. of
Teeth
T10-320
T10-340
T10-390
T10-480
32
34
39
48
55
65
68
85
Made-to-Order AT5 Pitch*
Part
No.
No. of
Teeth
AT5-225
AT5-330
AT5-450
45
66
90
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
225
330
450
AT5-480
AT5-525
AT5-670
96
105
134
480
525
670
AT5-710
AT5-860
AT5-2000
142
172
400
710
860
2000
Made-to-Order AT10 Pitch*
Part
No.
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
AT10-370
AT10-580
AT10-600
AT10-630
AT10-880
AT10-1000
37
58
60
63
88
100
370
580
600
630
880
1000
AT10-1100
AT10-1190
AT10-1200
AT10-1220
AT10-1230
AT10-1240
110
119
120
122
123
124
1100
1190
1200
1220
1230
1240
AT10-1280
AT10-1300
AT10-1350
AT10-1360
AT10-1420
AT10-1480
128
130
135
136
142
148
1280
1300
1350
1360
1420
1480
*Minimum order quantity is full sleeve yield +/- 10%. Unless otherwise noted, sleeve width is 300mm. Minimum cut belt width is 4mm.
Contact customer service for pricing and availability.
1
240mm sleeve
®
Powering Progress.
gates.com/pt
89
SYNCHRO-POWER BELTS
June 2012
SYNCHRO-POWER BELTS
Made-to-Order DT5 Pitch*
Part
No.
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
DT5-410
DT5-460
DT5-515
DT5-525
82
92
103
105
410
460
515
525
DT5-550
DT5-590
DT5-620
DT5-685
110
118
124
137
550
590
620
685
DT5-700
DT5-750
DT5-815
DT5-840
140
150
163
168
700
750
815
840
No. of
Teeth
Pitch
Length
(mm)
Part
No.
No. of
Teeth
Pitch
Length
(mm)
720
840
900
920
980
DT10-1100
DT10-1210
DT10-1240
DT10-1250
DT10-1320
110
121
124
125
132
1100
1210
1240
1250
1320
Part
No.
No. of
Teeth
Pitch
Length
(mm)
DT5-860
DT5-940
DT5-1100
172
188
220
860
940
1100
Part
No.
No. of
Teeth
Pitch
Length
(mm)
DT10-1350
DT10-1420
DT10-1610
DT10-1880
135
142
161
188
1350
1420
1610
1880
Made-to-Order DT10 Pitch*
Part
No.
No. of
Teeth
DT10-260
DT10-530
DT10-630
DT10-660
DT10-700
Pitch
Length
(mm)
Part
No.
260
530
630
660
700
DT10-720
DT10-840
DT10-900
DT10-920
DT10-980
26
53
63
66
70
72
84
90
92
98
1
240mm sleeve
90
gates.com/pt
Gates Corporation
®
June 2012
Synchro-Power® Polyurethane Timing Belts
SYNCHRO-POWER BELTS
Endless urethane construction provides higher strength as
compared to welded urethane belts, making them well-suited for
use in power transmission and high-performance positioning
applications.
Synchro-Power imperial pitch timing belts are ideal for use in
office machines, machine tools, postage equipment, sewing
machines, vending machines, agriculture, outdoor power
equipment, wood and paper, sand/gravel operations, oil fields,
food processing, and HVAC.
Features/Advantages
n Abrasion, chemical, and wear resistant for extended life.
n Temperature ranges from -22°F to +176°F (-30°C to +80°C).
Contact the Gates Made-To-Order Metals Team.
Notes
See end of this section for Made-to-Order lengths available. The minimum order quantity is full sleeve yield +/- 10%. Sleeve widths are 300mm
unless otherwise noted. Minimum cut belt width is 4mm. Please contact Customer Service for price and availability.
Synchro-Power belts listed on the following pages are available in custom widths as Standard/Non-Stock with no minimum order quantities
required. Contact Customer Service for minimum and maximum width range.
3/8" Pitch (.375"/L) — 1/2" Wide
Part
No.
Product
No.
150L050U
187L050U
202L050U
210L050U
225L050U
240L050U
255L050U
270L050U
7758-0050
7758-0053
7758-0056
7758-0059
7758-0062
7758-0065
7758-0068
7758-0071
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
40
50
54
56
60
64
68
72
15.00
18.75
20.25
21.00
22.50
24.00
25.50
27.00
.03
.04
.04
.04
.05
.05
.06
.06
285L050U
300L050U
322L050U
345L050U
367L050U
390L050U
420L050U
7758-0074
7758-0077
7758-0080
7758-0083
7758-0086
7758-0089
7758-0092
76
80
86
92
98
104
112
28.50
30.00
32.25
34.50
36.75
39.00
42.00
.06
.07
.07
.08
.08
.09
.10
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
40
50
54
56
60
64
68
72
15.00
18.75
20.25
21.00
22.50
24.00
25.50
27.00
.04
.06
.06
.06
.07
.08
.08
.09
285L075U
300L075U
322L075U
345L075U
367L075U
390L075U
420L075U
7758-0075
7758-0078
7758-0081
7758-0084
7758-0087
7758-0090
7758-0093
76
80
86
92
98
104
112
28.50
30.00
32.25
34.50
36.75
39.00
42.00
.10
.10
.11
.12
.13
.14
.15
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
40
50
54
56
60
64
68
15.00
18.75
20.25
21.00
22.50
24.00
25.50
.06
.08
.08
.09
.10
.10
.12
270L100U
285L100U
300L100U
322L100U
345L100U
367L100U
390L100U
7758-0073
7758-0076
7758-0079
7758-0082
7758-0085
7758-0088
7758-0091
72
76
80
86
92
98
104
27.00
28.50
30.00
32.25
34.50
36.75
39.00
.12
.12
.13
.15
.16
.17
.18
3/8" Pitch (.375"/L) — 3/4" Wide
Part
No.
Product
No.
150L075U
187L075U
202L075U
210L075U
225L075U
240L075U
255L075U
270L075U
7758-0051
7758-0054
7758-0057
7758-0060
7758-0063
7758-0066
7758-0069
7758-0072
3/8" Pitch (.375"/L) — 1" Wide
Part
No.
Product
No.
150L100U
187L100U
202L100U
210L100U
225L100U
240L100U
255L100U
7758-0052
7758-0055
7758-0058
7758-0061
7758-0064
7758-0067
7758-0070
®
Powering Progress.
gates.com/pt
91
June 2012
SYNCHRO-POWER BELTS
3/8" Pitch (.375"/L) — 1" Wide (continued)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
420L100U
7758-0094
112
42.00
.20
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
48
54
60
66
72
24.00
27.00
30.00
33.00
36.00
.09
.10
.10
.12
.15
390H075U
420H075U
450H075U
480H075U
510H075U
7758-0025
7758-0030
7758-0035
7758-0040
7758-0045
78
84
90
96
102
39.00
42.00
45.00
48.00
51.00
.16
.17
.18
.20
.21
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
48
54
60
66
72
24.00
27.00
30.00
33.00
36.00
.10
.11
.13
.15
.17
390H100U
420H100U
450H100U
480H100U
510H100U
7758-0026
7758-0031
7758-0036
7758-0041
7758-0046
78
84
90
96
102
39.00
42.00
45.00
48.00
51.00
.18
.20
.23
.23
.26
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
48
54
60
66
72
24.00
27.00
30.00
33.00
36.00
.15
.20
.21
.26
.30
390H150U
420H150U
450H150U
480H150U
510H150U
7758-0027
7758-0032
7758-0037
7758-0042
7758-0047
78
84
90
96
102
39.00
42.00
45.00
48.00
51.00
.32
.37
.39
.43
.49
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
48
54
60
66
72
24.00
27.00
30.00
33.00
36.00
.23
.25
.30
.32
.37
390H200U
420H200U
450H200U
480H200U
510H200U
7758-0028
7758-0033
7758-0038
7758-0043
7758-0048
78
84
90
96
102
39.00
42.00
45.00
48.00
51.00
.40
.45
.50
.52
.57
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
Part
No.
Product
No.
No. of
Teeth
Pitch
Length
(In.)
Wt.
Ea.
(Lbs.)
48
54
60
66
72
24.00
27.00
30.00
33.00
36.00
.45
.50
.57
.60
.65
390H300U
420H300U
450H300U
480H300U
510H300U
7758-0029
7758-0034
7758-0039
7758-0044
7758-0049
78
84
90
96
102
39.00
42.00
45.00
48.00
51.00
.70
.75
.79
.85
.89
1/2" Pitch (.500"/H) — 3/4" Wide
Part
No.
Product
No.
240H075U
270H075U
300H075U
330H075U
360H075U
7758-0000
7758-0005
7758-0010
7758-0015
7758-0020
1/2" Pitch (.500"/H) — 1" Wide
Part
No.
Product
No.
240H100U
270H100U
300H100U
330H100U
360H100U
7758-0001
7758-0006
7758-0011
7758-0016
7758-0021
1/2" Pitch (.500"/H) — 1 1/2" Wide
Part
No.
Product
No.
240H150U
270H150U
300H150U
330H150U
360H150U
7758-0002
7758-0007
7758-0012
7758-0017
7758-0022
1/2" Pitch (.500"/H) — 2" Wide
Part
No.
Product
No.
240H200U
270H200U
300H200U
330H200U
360H200U
7758-0003
7758-0008
7758-0013
7758-0018
7758-0023
1/2" Pitch (.500"/H) — 3" Wide
92
Part
No.
Product
No.
240H300U
270H300U
300H300U
330H300U
360H300U
7758-0004
7758-0009
7758-0014
7758-0019
7758-0024
gates.com/pt
Gates Corporation
®
June 2012
Made-to-Order 2/25" Pitch (.080"/ MXL)*
Part
No.
1
440
456
2
480
1
560
3
576
2
600
1
608
1
632
640
656
704
728
1
No. of
Teeth
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
55
57
60
70
72
75
76
79
80
82
88
91
Pitch
Length
(In.)
Part
No.
No. of
Teeth
Pitch
Length
(In.)
4.40
4.56
4.80
5.60
5.76
6.00
6.08
6.32
6.40
6.56
7.04
7.28
736 MXL
768 MXL
808 MXL
816 MXL
824 MXL
840 MXL
880 MXL
912 MXL
944 MXL
960 MXL
1040 MXL
1056 MXL
92
96
101
102
103
105
110
114
118
120
130
132
7.36
7.68
8.08
8.16
8.24
8.40
8.80
9.12
9.44
9.60
10.40
10.56
Part
No.
1080
1120
1160
1200
1240
1400
1520
1600
1768
2048
2240
2280
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
No. of
Teeth
Pitch
Length
(In.)
135
140
145
150
155
175
190
200
221
256
280
285
10.80
11.20
11.60
12.00
12.40
14.00
15.20
16.00
17.68
20.48
22.40
22.80
Part
No.
2464
2656
2816
2880
3160
3240
3296
3456
3632
3880
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
MXL
No. of
Teeth
Pitch
Length
(In.)
308
332
352
360
395
405
412
432
454
485
24.64
26.56
28.16
28.80
31.60
32.40
32.96
34.56
36.32
38.80
Made-to-Order 1/5" Pitch (.200"/ XL)*
Part
No.
60 XL
70 XL
76 XL
80 XL
90 XL
96 XL
100 XL
106 XL
110 XL
No. of
Teeth
Pitch
Length
(In.)
30
35
38
40
45
48
50
53
55
6.00
7.00
7.60
8.00
9.00
9.60
10.00
10.60
11.00
Part
No.
120
130
134
140
150
160
170
180
190
No. of
Teeth
Pitch
Length
(In.)
60
65
67
70
75
80
85
90
95
12.00
13.00
13.40
14.00
15.00
16.00
17.00
18.00
19.00
XL
XL
XL
XL
XL
XL
XL
XL
XL
Part
No.
194
200
210
220
230
240
250
260
270
XL
XL
XL
XL
XL
XL
XL
XL
XL
No. of
Teeth
Pitch
Length
(In.)
97
100
105
110
115
120
125
130
135
19.40
20.00
21.00
22.00
23.00
24.00
25.00
26.00
27.00
Part
No.
288
290
300
356
414
450
566
XL
XL
XL
XL
XL
XL
XL
No. of
Teeth
Pitch
Length
(In.)
144
145
150
178
207
225
283
28.80
29.00
30.00
35.60
41.40
45.00
56.60
Made-to-Order 3/8" Pitch (.375"/L) - L Pitch*
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Part
No.
No. of
Teeth
Pitch
Length
(In.)
Part
No.
No. of
Teeth
Pitch
Length
(In.)
23
33
46
8.60
12.38
17.25
450 L
480 L
510 L
120
128
136
45.00
48.00
51.00
540 L
570 L
600 L
144
152
160
54.00
57.00
60.00
86 L
124 L
173 L
Made-to-Order 1/2" Pitch (.500"/H) - H Pitch*
Part
No.
No. of
Teeth
Pitch
Length
(In.)
46
23.00
230 H
1
100mm sleeve
2
120mm sleeve
3
270mm sleeve
®
Powering Progress.
gates.com/pt
93
SYNCHRO-POWER BELTS

Poly Chain® GT® Carbon™ Belts

Transcription

Similar documents

PowerGrip® Timing Belts

PowerGrip® Timing Belts

Light Power Drive Design Manual

POLY CHAIN® GT SPROCKETS

POWERGRIP® GT3