Prospekt Synchrowinch Universal_ENG.cdr
Transcription
Prospekt Synchrowinch Universal_ENG.cdr
HERZOG ALPINE Synchrowinch Universal The standard in synchronising universally usable for harvesters and forwarders Tel +41 026 419 80(0)26 419 90 30 Tel.29 +41 HERZOG FORSTTECHNIK AG HERZOG FORSTTECHNIK AG Mobil +41 079 357 91(0)26 419 90 31 Fax14 +41 [email protected] / www.herzog-forsttechnik.ch [email protected] / www.herzog-forsttechnik.ch Fax +41 026 419 31 80 Forstmaschinen Allmend 25 Forstmaschinen, Hydraulik,Hydraulik Mechanik Mechanik Allmend 25 CH-1719 Zumholz Service Schweiz & Verkauf CH-1719 Zumholz Verkauf/Service fürSchweiz PONSSEfür PONSSE HERZOG ALPINE Synchrowinch Universal Technical data Tensile force: 0 up to 100 kN (0 up to 10 tonns) continuously variable (constant tensile force on all cable systems) Cables: 280m, Ø 15mm, consoildated construction minimal resistance of tensile stress 200 kN (20 t) or 340m, Ø 14mm, highconsoildated special cable with 211 kN minimal resistance of tensile stress. Rope drum: Core-Ø = 340mm, Outside-Ø = 600mm, Width = 400mm Drive: Hydrostatic winch drive, additionally beared planetary gear unit with integrated spring loaded fail-safe brake Hydraulics: Hydraulic supply from basic machine, ideal operation pressure 350 bar, required delivery rate of the pump: 170 l/min (with 1500 rpm on the diesel engine). Regularly the crane pump can be used for the winch drive. The pump should have a load-sensing regulation. The min. neccessary operating pressure is depending on the machine's weight between 260 and 350 bar. Winch mounted in fornt of the forwarder, loader in the back. The solution for not constant use on steep slopes. Also possible and powerful with forwarders without crane tilt. Rope winding: Hydraulic guided constrained winding Cable ejection: Hydraulic driven cable ejector Steeringmechanism, regulation: Electronic synchronous regulation of winch- and wheel drive. Automatically gear shifting and regulation of the steering mechanism of the winch while driving Operation: Radio remote controlled with continuous variable speed- and force adjustment Observation: Automatical observation of cable failure and slack rope, additional camera overlooking the winch drum Reversingcamera: In the winchrear integrated camera and reversing headlight Seat tilt: Between seat spring and cabin ground installed tilt plate, max. tilt angle on the vehicle's longitudinal axis: 23° Dimensions: Legth: 810 mm Width: 1'600 mm Heighth: 1'450 mm Due to the fast-application adapter the traction winch can be applicated and removed in a short time. Then just a few actions and you can start working! Weight: Additional weight (compared with the machine without winch): ca. 2'050 kg. Your regional contact: Mounting: With fast application adapter and fast coupling for the hydraulics. This was it is possible to mount the winch on another machine in a short time. Winch on harvester for fullprofessional felling on steep slopes. This way the stand of trees and the soil can be protected without compromises.