goodwood - quality products from australian sustainable

GOODWOOD - QUALITY PRODUCTS FROM AUSTRALIAN SUSTAINABLE HARDWOODS
Environment
ISO 14001
ABN 72 151 841 43
1
PROPERTIES
GoodWood Australian Hardwood
Victorian Ash is a medium density Hardwood comprising of two species, Eucalyptus
delegatensis and Eucalyptus regnans, which are visually identical and share
similar properties.
Colour
Pale pink to pale straw
Grain
Straight, open and even.
Occasionally coarse grained or
fiddle backed. Growth rings are
visible and usually conspicuous
Moisture Content
Medium density 680 KG/m3
at 12% moisture content.
Seasoned to comply with the
Australian Standard AS2796
(9%- 14%) with the average
moisture content ranging
between 10% and 12%.
Impact Resistance High 18 – 20 joules
Janka
4.9kN (seasoned)
Unit Shrinkage
(KD)
Measurable movement
in service – Low
Radial: 0.23% of board dimension
per 1% moisture content change.
Tangential: 0.36% of board
dimension per 1% moisture
content change
Stability
High – quarter sawn
Fire Indices: Refer Australian Standard AS1530 Part 3 and Building
Code of Australia.
Ignitability index: 14
Spread of flame index: 8
Heat Evolved index: 7
Smoke development index: 3
Flooring AS/1SO 9239.1
Critical Radiant Heat Flux: More than 2.2 kW/m2 and less than 4.5 kW/m2
Smoke development Rate: Less than 750 % -min
Wall and Ceiling lining AS/NZS3837: 1998
Average extinction area: Less than 250m2/kg
Material Group No: 3
Bushfire Attack level: BAL 19 High (untreated)
2
CONTENTS
Australian Sustainable Hardwoods and Goodwood Overview ................................. 4
Grading ....................................................................................................................... 8
GoodWood - Furniture, Joinery and Veneer ...............................................................10
GoodWood - Window Frames and Doors ..................................................................12
GoodWood - Flooring ................................................................................................ 14
GoodWood - Structural ............................................................................................ 16
Laminated GoodWood - Staircase Components, Panels, Kitchens, Furniture.......... .... 18
GoodWood - Moulded Products .............................................................................. 20
SUPALAMTM Range .................................................................................................. 22
Comparative Timber Properties ............................................................................... 24
Export ....................................................................................................................... 26
3
GoodWood Sustainable Australian Hardwood is derived from two
Eucalypt species. The natural timber is smooth and warm underfoot,
visually stimulating, strong and durable. GoodWood is a premium quality,
dense hardwood with beautiful warm tones
GOODWOOD OVERVIEW
INTRODUCTION
SPECIES
GoodWood products, manufactured by
All GoodWood is sourced by ASH from
Australian Sustainable Hardwoods (ASH)
Australian Forestry Standard certified resources
ensure both a stylish and responsible choice
controlled by Victorian State Government and
GoodWood means that users know the timber used is
milled in Victoria.
supplied on a controlled, environmentally responsible
GoodWood is derived from Eucalyptus regnans and
and sustainable basis. GoodWood is made in
delegatensis.
Australia, not derived from poorly controlled or
illegal logging.
FEATURES
CERTIFICATION
• Quality sustainable Australian hardwood sourced
from PEFC certified forests
ASH is certified and third party audited to AS4801
• Environmentally friendly
Australian Safety Standard, ISO14001 International
• Energy efficient, natural material
Environmental Standard, AS4707 Chain of Custody
• Quarter sawn for dimensional stability
for Certifed Wood and Forest Products (AFS PEFC)
and AS1328 Glue Laminated Timber. This ensures the
Company operates under nationally and internationally
accepted environmental, safety management and
quality practices.
• Strong and durable
• Natural insulation
• Non-allergenic and ideal for asthmatics
or allergy sufferers
• Flexible with a range of applications
All of ASH’s operations are proud to have achieved
• Timeless quality and appearance
Chain of Custody (CoC) Certification under
• Can be refinished after years of service
the Australian Forestry Standard (AFS). GoodWood
products can be tracked from origin to end-use,
meaning our customers can be certain that these
products are sustainably produced.
The AFS has mutual recognition under the
Programme for Endorsement of Forest Certification
Schemes (PEFC). PEFC certifies nearly 200 million
hectares of forest worldwide.
4
Environment
ISO 14001
AUSTRALIAN SUSTAINABLE
HARDWOODS OVERVIEW
Secure, Stable, Long Term Supply of
Certified Quality Products
The Australian Sustainable Hardwoods (ASH) Heyfield
from the trees, a regeneration fire conducted and the
operation is the largest hardwood sawmill in Australia,
seed is re sown onto the site thereby maintaining the
processing 155,000m3 of Victorian Ash sawlog per
genetic cycle. Only the stored carbon in the form of
annum.
the sawlog leaves the site. No pesticides or fertiliser
are used, ensuring a natural process.
RESOURCE
OPERATION
ASH has long term contracts for the supply of
ASH operates two facilities in Heyfield.
155,000m3 of certified ash regrowth sawlogs from
VicForests, the Victorian Government’s commercial
The Greenmill converts the sawlogs into slabs of
forestry business.
timber for drying and further processing at the
Processing Plant. Roofing battens and veneer flitch
The Victorian Forest Estate is well managed with all
are sold directly from the Greenmill. Bi products of
forest types being represented in the extensive parks
woodchips and sawdust are also sold.
and reserve system. Six percent (480 thousand
hectares) of the forest estate is available and
The Processing Plant dries, processes and
acceptable for commercial forest activities.
manufactures products for the manufacturing market
Harvesting and regeneration must be within the
(staircase, window, door, furniture, cabinetry, shop
sustainable yield of the forest so the harvesting rate
fitting) and the merchant market (flooring, architraves,
never exceeds the growth rate of the forest.
dressed boards, structural beams). Bi products sold
Harvesting and regeneration takes place under a strict
from the Processing Plant are woodchips and
code of forest practice so all values of the forest are
sawdust. Approximately half the sawdust produced at
taken into consideration. The code includes ensuring
the Processing Plant is utilised through the boiler to
the operations are small and well spread, thereby
create heat and steam for final drying of the timber.
minimising any impact.
The slabs of timber are firstly air dried until they reach
a moisture content of 20 percent. The slabs are then
Prior to harvesting and regeneration all of the forest
reconditioned (steamed) and kiln dried to 10 percent
values are assessed to ensure the integrity of the
moisture content. The slabs are processed through
forest. This includes the flora, fauna, soil, water,
one of two scanning drymills and sawn into widths of
cultural, archaeological and silvicultural values. The
four grades. Because final sawing is after kiln drying,
Victorian Ash forests naturally regenerate through fire
the resultant product is absolutely straight kiln dried
killing the trees, after which seed falls from the trees
sawn timber (straight line edged). The scanning
onto the ash bed created by the fire. A new stand of
drymills also utilise ultrasound technology to ensure
trees then grows.
internal defects, including checking, are detected and
not used in appearance grade applications.
The harvesting and regeneration operation is
designed to mimic the natural process. When the
The Heyfield Processing Plant has four separate
trees are felled, the bark and leaves, containing most
reprocessing departments producing a range of
of the nutrients, remain in the forest thereby
finished window, door, staircase, flooring, mouldings
maintaining the nutrient cycle. The seed is collected
and structural products.
5
AUSTRALIAN SUSTAINABLE
HARDWOODS OVERVIEW
HEYFIELD GREENMILL
HEYFIELD PROCESSING PLANT
6
Australian
Sustainable
Hardwoods
APPLICATIONS
• GoodWood Window Frames and Doors
• GoodWood Staircases
• GoodWood Flooring
• GoodWood Moulded products
• GoodWood Furniture
• GoodWood Joinery (Cabinet doors and bench tops)
• Glue Laminated GoodWood
• GoodWood Structural
SAWN TIMBER GRADES
Select
1
Standard
2
Structural
3
Merch and Utility
4
SIZES
MM, SAWN
Thickness1
16, 25, 38, 50
Width1
50, 75, 100, 125, 150,
175, 200, 225, 250, 300
Length 1
Range from
900mm to 5400 mm
1 - Thicker wider & longer sections available in laminated form
5
7
GRADING
GoodWood Select Grade
GoodWood Standard Grade
Premium GoodWood product that has a very clean
Quality timber with more natural characteristics
look with few noticeable natural growth characteristics.
than Select. May feature gum vein but remains
Ideal solution for all appearance products.
fit for purpose.
8
GoodWood Structural Grade
GoodWood Colour
GoodWood for structural applications where
In its natural state, GoodWood is an even pale straw
strength is required. E.g. lintels, floor joists,
colour. GoodWood accepts stains and paints well,
bearers, rafters and truss applications.
ensuring freedom and flexibility in creating the
desired finish.
SUPA17TM – a range of seasoned hardwood structural
products manufactured from A17 grade timber.
Other Grades
F17 grade is available under the SUPALAMTM range.
Natural feature, merch and utility grades are
also available.
9
GOODWOOD FURNITURE, JOINERY
AND VENEER
Stability
Internal Joinery
GoodWood is quarter sawn, illustrated by growth
Excellent workability and the hard wearing nature of
rings being perpendicular to the face of the board
GoodWood make it suitable for a full range of internal
when looking at the end profile. This ensures the
joinery and timber lining products including:
greatest drying stability, achieved through the
eveness of drying and low radial shrinkage. All
• Architraves/Skirtings
• Laminated Bench Tops
boards are straight line edged after final kiln drying
• Balustrades
• Laminated posts
therefore guaranteeing straight timber.
• Cabinetry
• Mouldings
• Doors
• Stair Treads set length
Quarter sawn timber gives the craft person a stable,
• Floors
• Stringers
straight product with even grain and minimises waste.
• Handrails
• Wall Linings
Furniture
Internal joinery products are available in sawn timber,
dressed profiled, sanded, laminated and finger jointed,
GoodWood provides furniture manufacturers
with a high quality answer for strong components
in small end sections.
The timber is easily
worked but also has
natural strength and
resistance to wear.
GoodWood is ideal
for sawing, planing,
boring, rebating,
mortising, turning,
nailing, laminating,
gluing, sanding and
bending.
GoodWood is also
available in sanded
laminated panels,
table tops and
furniture tops.
10
laminated set length
11
GOODWOOD WINDOWS AND DOORS
Window Frames and Doors
Why use Goodwood timber over other materials?
GoodWood window frames and doors stain and paint
Timber windows are more energy efficient than
easily and are strong and durable.
aluminium frames and will increase the energy
efficiency of your home. The manufacture of timber
Naturally uniform timber colour means that consistent
for building and appearance products uses less
design elements can be built into internal and
fossil fuel energy per unit volume than steel,
external designs.
concrete and aluminium. When designing
with energy efficiency in mind, consider window
GoodWood is available in a large range of sizes
placement and glazing options.
and long lengths. This ensures window and door
designers and manufacturers have a broad scope
Features
in terms of design when Goodwood is used.
• Available in all joinery section sizes
Window frames and doors produced using
and specifications
GoodWood are hard, durable and resistant to
• Available in two grades, Select and Standard
indentation damage. GoodWood offers a solution
• Can be moulded to a wide range of profiles
that softer timbers cannot.
and are timeless in appearance
• Consistent grain which accepts all stains
The excellent workability of the timber gives uniform
machined profiles, a fully satisfying result.
and paint finishes
• Double the hardness of Western Red Cedar
• Excellent thermal and insulation properties superior
to other materials like aluminium, steel or concrete
• More durable than meranti or pine in above
ground situations
• Natural material - renewable, energy efficient,
and will assist in reducing greenhouse emissions
• Outperforms many timbers due to its hardness,
consistency & straightness
• Quarter sawn stability for the most demanding
applications
• Sustainable resource harvested on 80 year cycle
• Working properties ensure it is an excellent timber
to mould and rebate
• Available in sawn timber, solid profile and set length
profiled fingerjointed laminated
• Available in H3 clear full penetration treatment
• Superior Natural Bushfire Attack Level (BAL 19)
compared to Meranti (BAL low) Cedar (BAL low)
12
© Aspect Windows and Abode Inspirations
© Binq
© Highcraft Windows
13
GOODWOOD
FLOORING
OVERLAY
Product
Size
Grade
Lengths
Matching
Unfinished
68 x 13 mm
Select/Standard
900 mm – 2.7 m
E/M or P/E
85 x 13 mm
Select/Standard
900 mm – 2.7 m
E/M or P/E
112 x 13 mm
Select/Standard
900 mm – 2.7 m
E/M or P/E
STRIP FLOORING – SECRET-NAIL OR TOP-NAIL
Product
Size
Grade
Lengths
Matching
Unfinished
65 x 19 mm
Select/Standard
900 mm – 5.4 m
E/M or P/E
85 x 19 mm
Select/Standard
900 mm – 5.4 m
E/M or P/E
Finger Jointed
85 x 19 mm
Select/Standard
4.2 m, 4.8 m, 5.4 m
E/M or P/E
Stadium
65 x 21 mm
Select/Standard
900 mm – 5.4 m
E/M or P/E
STRIP FLOORING – TOP-NAILED
Product
Size
Grade
Lengths
Matching
Unfinished
108 x 19 mm
Select/Standard
900 mm – 5.4 m
E/M or P/E
Finger Jointed
85/108 x 19 mm
Select/Standard
4.2 m, 4.8 m, 5.4 m
E/M or P/E
133 x 19 mm
Select/Standard
900 mm – 5.4 m
E/M or P/E
• E/M End matched. A groove is machined at one end of the floorboard and a tongue at the other rear end.
This method allows joining of floorboard regardless of floor joist location.
•
• Thicker sizes and custom profiles are available
14
GOODWOOD
FLOORING
GoodWood flooring, manufactured by Australian
FEATURES AND BENEFITS
Sustainable Hardwoods (ASH), ensure both a stylish
and responsible Choice.
•
High quality Australian hardwood
GoodWood flooring is available in Victorian Ash. The
•
Chain of Custody certification
natural material is warm and smooth underfoot,
•
Environmentally friendly
visually stimulating, strong and durable.
•
Natural material
•
Strong and durable
•
Quarter sawn for dimensional stability
•
Easy to install
•
Flexible with a range of applications
•
Timeless quality and appearance
•
Can be refinished after years of service
•
Warm feel
•
Non-allergenic and ideal for asthmatics or allergy
sufferers
15
GOODWOOD STRUCTURAL
GoodWood SUPA 17TM
Standards
STRENGTH RELIABILITY PERFORMANCE
Complies with the following Australian Standards:
GoodWood SUPA 17TM is a range of seasoned
AS2082 - 2007
purposes
A17 grade Victorian Ash. Visually stress graded in
accordance with the Australian Standard AS 2082,
AS1604.1 - 2010
Specification for preservative
AS1684.2 – 2010
Residential Timber Framed
SUPA 17TM is externally audited to ensure product
compliance and is ideal where high strength to weight
Visually stress graded
hardwood for structural
hardwood structural products manufactured from
treatment/sawn and round
ratio is required.
construction design criteria
AS – NZS4063 – 2010 Timber stress graded
Rigorous external quality audits, greater spanning
in grade strength and
and nail holding ability makes GoodWood
stiffness evaluation
SUPA 17
TM
superior to traditional F17 and LVL.
AS1604.1 - 2012
Timber Treatment
standard
Applications
• Bearers
• Lintels
• Counter beams
• Rafters
• Floor joists
• Strutting beams
• Hanging beams
• Wall studs
Dressed Sizes
Width (mm)
• Intermediate beams • Underpurlins
• All truss applications
Thickness (mm)
35
45
70
✓
✓
90
✓
✓
120
✓
✓
140
✓
✓
170
✓
✓
• Straightness
190
✓
✓
• Stability
220
✓
✓
• Strength
240
✓
✓
• Lengths
290
✓
✓
Features and Benefits
• Quality Assurance
• Sustainable, PEFC certified resource
• Cost efficiency
• Easy handling – pencil round edges
• Ready availability
• Lyctus resistant
• Available in Treated H2 (Tru-Core® non solvent)
• Available in Treated H3 & ideal for sub-decking (Tru-Core® non solvent)
16
JOINT GROUP
GoodWood SUPA 17TM has a Joint Group and
Strength Group classification of JD3 and SD3.
H2 Tru-Core® Treated
Approved for use throughout Australia including
the Tropic of Capricorn.
• Non toxic, red treatment colour
• Pyrethoids, Treated to H2 as per AS 1604.1 2012
• Suitable for both interior and protected above
ground applications
• Available in solid up to 5.4m
(See Supalam for longer lengths)
• Dressed sizes, straight lined edge
• Lengths from 900 mm – 5.4 m in 300 mm
increments
• 35 mm and 45 mm dressed pencil round
H3 Tru-Core® Treated
• Non toxic, red and green colour.
• Pyrethoids, Treated to H3 as per AS1604.1 - 2012.
• Suitable for both interior & protected above
ground applications
• Available in solid up to 5.4m (see supalam
for longer lengths)
• Dressed sizes, straight lined edge
• Lengths from 900mm - 5.4m in 300mm increments
• 35mm & 45mm dressed pencil round
Email [email protected] to obtain
GoodWood Supa17TM Span Tables in hard
copy format.
17
LAMINATED
GOODWOOD STAIRCASE COMPONENTS,
PANELS, KITCHENS, FURNITURE
Laminated GoodWood Australian Hardwood,
manufactured from Eucalyptus delegatensis
and regnans, provides wider widths and thicker
thicknesses, maximising the use of smaller
regrowth logs. Ensures cost effective supply
of thick wide boards.
ASH also produces the SUPALAMTM range, a finger
– jointed, edge laminated product made from
GoodWood Australian Hardwood.
Features and Benefits
Quality – sanded or machine finished colour matched,
precison docked
Stability – visually graded kiln dried hardwood
dimensionally stable making it an ideal species
to laminate
Strength & Straightness – Vic Ash has a high strength
to weight ratio. ASH straight line edge all boards after
kiln drying. When laminated, the strength and
straightness attributes are enhanced.
Impact resistance – laminated GoodWood with a
high izod reading of 18-20 joules has the ability to
absorb high impact loads for short periods with no
adverse effects
Workability – glue laminated product is easy to work
with using standard carpentry tools
Fire resistance – large sections have a high fire
resistance and char but still maintain their structural
integrity for a long period of time
Colour matching – range from pale pink to straw
tones. The maunfacturing process aims
to produce glue laminate that has a high level
of colour consistency as well as performance
consistency, so that the appearance of the finished
product is that of a solid piece of timber.
18
Glue laminated products are available in Select Grade
Resistance to chemicals – timber is unaffected by
most chemicals and resistant to degradation by salt
air which can quickly corrode other building materials
Reliability – laminated components are manufactured
to strict quality requirements from kiln dried, visually
graded Australian Hardwood which has a proven
history of high performance
Glue type used in appearance products –
Duro –lok 2150 (2 parts, Cross Link PVA)
conforms to the European BS EN 204 –
exposure group D4 (white glue drying clear)
Glue laminated timber is suitable for the following
applications.
Product*
Dressed
Size (mm)
Length
Specification
Stringer
240 x 33
2.1m – 5.4m
285 x 33
2.1m – 5.4m
285 x 43
2.1m – 5.4m
285 x 33
0.9m, 1m,
1.1m, 1.2m,
285 x 43
0.9m, 1m,
1.1m, 1.2m,
Treads
280 x 66
1.1m, 1.2m,
Risers
190 x 19
0.9m – 5.4m
Squares
65 x 65
1.5m – 5.4m
90 x 65
90 x 90
140 x 65
Bench tops
& Panels
Range of sizes
available
Up to 5.4m In set length
Landings
720 x 33
1.2m, 1.5m, 1.8m
*Custom sizes available on request, ideal for architect
designed and large commercial projects.
Finger Jointed Laminated Staircase
Components and Panels
GoodWood Australian Hardwood is available in finger
jointed laminated staircase components and panels.
This gives the added advantage of set lengths in every
product, improving the manufacturer’s recovery.
In addition, long lengths are available. FJ Lam staircase
is available in select and in vertical (fingers on face)
or horizontal (straight line on face) finger joints.
All finger jointed laminated products use PURBOND
polyurethane clear adhesive and are produced to
AS1328. The process is audited and certified
by Monash University.
Product
Dresses
Size (mm)
Length (m)
(see note 1)
Stringer
240x33
3.3m, 5.7m
285x33
3.3m, 5.7m
285x43
3.3m, 5.7m
285x33
1.0m, 1.1m, 1.2m
285x43
1.0m, 1.1m, 1.2m
90x90
5.7m
65x65
5.7m
641x33mm or 43mm
Set length to order
855x33mm or 43mm
Set length to order
1211x33mm or 43mm
Set length to order
Treads
Squares
Panels (See Note 2)
Note 1. other sizes & lengths available on request
Note 2. panels are available in widths from 356mm to 1211mm in
multiples of 71.25mm
19
GOODWOOD MOULDED PRODUCTS
Sizing
Lining/boards
V-joint
Sizing will vary according to individual suppliers,
please use the following info as a general guide
19mm
Architraves
Bullnose
Standard Sizes - mm
13mm
135
x
12
110
x
12
85
x
12
Window reveals
42mm / 65mm / 85mm
Standard Sizes - mm
19mm
Colonial
13mm
90
x
19
100
x
19
110
x
19
135
x
19
Door jambs/stops
Standard Sizes - mm
42mm / 65mm / 85mm
Single Bevel
30
x
10
112
x
19
19mm
13mm
42mm / 65mm / 85mm
• Please note a range of specials
can be made to order.
• Minimum order requirements apply
20
Indoor & Outdoor Screening
• Available in custom sizing
Features
• Kiln dried quarter sawn
• Long straight grain
• Custom sizing can be produced to order
including heritage work
• Medium density hardwood that machines easily
• Supplied in random lengths
• Distinctive natural appearance
• Mouldings available in period
• Quality alternative to MDF and pine
• Holds nails and screws well
• Readily accepts all stains and paint finishes
• Easy to repair if marked or damaged and lasts
much longer than alternative products
• Most sizes available ex stock
or contemporary profiles
• Hospital and nursing home handrails
are turned to order
• Low allergenic properties that do not
emit trace chemicals
• Set lengths and finger jointed products
available.
21
SUPALAMTM RANGE
SUPALAMTM is a range of hardwood products
PURBOND™ polyurethane adhesive which is
produced by ASH from forestry certified
formaldehyde free, eliminating an emerging safety
and sustainable regrowth Victorian Ash. Products
issue with resorcinol adhesives in common use
currently include SUPALAM™A17 structural beams,
for structural timber products. This combination
SUPACHORD
of environmental credentials provides a product
TM
and SUPASTAIR
TM
staircase
components up to 7.2 metres in length.
that is ideal for environmentally stringent
specifications in construction.
The manufacturing process at ASH Heyfield
in Victoria is comprised of finger joining and
SUPALAMTM products are available through trade
laminating of fully seasoned hardwood using
suppliers such as timber merchants and truss & frame
advanced production technology and highly
fabricators in the major markets of Brisbane, Sydney
automated operation.
and Melbourne.
A major environmental feature of ASH
For marketing material, span tables and a list of
Heyfield production is third party forestry certification,
current distributors email [email protected]
and the long-term sustainability of regrowth
Victorian Ash. The manufacturing process uses
22
Tailor made large cross sections and long lengths of SUPALAMTM can be manufactured to order.
This flexibility makes SUPALAMTM the ideal choice for architects, designers and specifiers.
23
COMPARATIVE TIMBER
PROPERTIES
Property
Unit
GoodWood
European Oak
American White Oak
American Red Ash
Aus
GB
USA
USA
Moisture Content AS2796 9-13%
%
10-12 %
12%
12%
12%
Density @ 12% MC
kg/m3
680 ave
690 ave
750 ave
770 ave
Modulus of rupture
Mpa
110
97
105
107
Modulus of elasticity
Gpa
16
10
12
Maximum crushing strength
Mpa
63
52
51
53
Janka hardness
kN
4.9
5.5
6
6.3
Impact resistance
Joules
18-20
na
na
na
Strength Group
Seasoned
SD3 & SD4
SD5
SD5-6
SD4-5
Joint Group
Seasoned
JD3
JD4-5
JD5
JD4-5
Comments
24
BAL 19
BAL 29 Treated
European Ash
European Beech
Meranti
Western Red Cedar
Black Walnut
GB
GB
Malaysia
USA
USA
12%
12%
12%
12%
12%
700 ave
690 ave
450 ave
450 ave
600 ave
116
118
74
69
101
12
13
9.1
9.2
12
53
56
45
42
52
6.1
6.4
2.4
2.1
4.5
na
na
na
na
na
SD5
SD4 (but high variability)
SD7
SD7
na
JD5
JD4
na
JD7
na
prone to bluestain
BAL low
prone to bluestain
BAL low
prone to bluestain
25
EXPORT
Australian Sustainable Hardwoods (ASH) exports to
all major markets including China, Japan,
South East Asia, Europe the Middle East and the USA.
ASH offers a full range of products to export
customers and is able to manufacture specific sizes
and products to the customer’s order.
GoodWood products are shipped to customers
from the Port of Melbourne in Victoria, Australia.
This is a major port for domestic and international bulk
goods as well as container services.
Shipping times can take 15-40 days depending upon
the port of destination. All container loads are fully
inspected by AQIS and phytosanitary certificates
are issued as per the requirement of the importing
country. A 20’ container usually contains 17-20 m3
of timber. A 40’ container usually contains 31-34 m3.
Location Map
Export Locations
26
Please contact ASH at:
[email protected]
for further information including costs.
ITC Timber exports to all major markets including
China, Japan, South East Asia, Europe and the USA.
GoodWood® products are shipped to customers
from two ports, Bell Bay in Tasmania and the Port of
Melbourne in Victoria, Australia. Both ports are major
ports for domestic and international bulk goods as
well as container services.
Please contact ITC Timber at:
[email protected]
for further information including costs.
Brochure translations in other languages
can be found at:
http://www.itclimited.com.au/timber/export/index.php
Shipping times can take 15-40 days depending upon
the port of destination. All container loads are fully
inspected by AQIS and phytosanitary certificates
are issued as per the requirement of the importing
country. A 20’ container usually contains 17-20 m3
of timber.
Image courtesy of Port of Melbourne Corporation
27
GOODWOOD - QUALITY PRODUCTS FROM AUSTRALIAN SUSTAINABLE HARDWOODS
Australian Sustainable
Hardwoods
Versatile GoodWood
Victorian Ash
The possibilities are endless
Australian Sustainable Hardwoods (ASH) is a privately
Environmentally sustainable and natural
owned Australian company based in Heyfield Victoria,
Only certified regrowth Victorian Ash sawlogs are
the heart of Australian hardwood timber production.
used in manufacturing natural timber products.
ASH has over 200 employees. The operation has
manufactured high quality GoodWood products for
Quality, Stability and Straightness
over 30 years and has an excellent reputation
The high quality resource, highly trained and
for integrity.
dedicated staff, unique straight line process and
modern facilities ensure products of the highest
ASH GoodWood products are used for windows and
quality.
doors, furniture and staircase, mouldings and flooring,
kitchens and cabinetry, panelling & screening and high
Colour and grain
strength structural applications.
The light coloured hardwood and quarter sawing process
ensures consistent colour, grain and staining ability.
Availability
As Australia’s largest hardwood timber producer, ASH has
an established network of stockists throughout Australia.
A wide range of transport services, both national and
international, ensures prompt service and availability.
Length and Sizes
ASH produce a full range of widths and thickness and
offers custom sizing and packaging.
Guaranteed
Third party certification for quality, safety and chain of
custody guarantees the best possible products.
Contact ASH
Domestic Enquiries
Telephone. 03 5139 7001
Facsimile. 03 5139 7003
[email protected]
Environment
ISO 14001
Export Enquiries
Telephone. +61 3 5139 7000
Facsimile. +61 3 5139 7002
[email protected]
ABN 72 151 841 431
PO Box 268, Weir Road Heyfield
Victoria Australia 3858
www.vicash.com.au